diff options
Diffstat (limited to 'arch/powerpc')
-rw-r--r-- | arch/powerpc/boot/dts/mpc8641_hpcn.dts | 8 | ||||
-rw-r--r-- | arch/powerpc/platforms/86xx/mpc86xx.h | 5 | ||||
-rw-r--r-- | arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 11 | ||||
-rw-r--r-- | arch/powerpc/sysdev/fsl_pci.c | 244 | ||||
-rw-r--r-- | arch/powerpc/sysdev/fsl_pci.h | 145 |
5 files changed, 187 insertions, 226 deletions
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 6a78a2b37c0..5d82709cfcb 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -211,8 +211,8 @@ interrupt-parent = <&mpic>; }; - pci@8000 { - compatible = "86xx"; + pcie@8000 { + compatible = "fsl,mpc8641-pcie"; device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; @@ -399,8 +399,8 @@ }; - pci@9000 { - compatible = "86xx"; + pcie@9000 { + compatible = "fsl,mpc8641-pcie"; device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h index 23f7ed2a7f8..525ffa1904f 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx.h +++ b/arch/powerpc/platforms/86xx/mpc86xx.h @@ -15,11 +15,6 @@ * mpc86xx_* files. Mostly for use by mpc86xx_setup(). */ -extern int mpc86xx_add_bridge(struct device_node *dev); - -extern int mpc86xx_exclude_device(struct pci_controller *hose, - u_char bus, u_char devfn); - extern void __init mpc86xx_smp_init(void); #endif /* __MPC86XX_H__ */ diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 5b01ec7c13d..e67e10d3272 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -31,6 +31,7 @@ #include <asm/mpic.h> +#include <sysdev/fsl_pci.h> #include <sysdev/fsl_soc.h> #include "mpc86xx.h" @@ -344,8 +345,14 @@ mpc86xx_hpcn_setup_arch(void) } #ifdef CONFIG_PCI - for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) - mpc86xx_add_bridge(np); + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) { + struct resource rsrc; + of_address_to_resource(np, 0, &rsrc); + if ((rsrc.start & 0xfffff) == 0x8000) + fsl_add_bridge(np, 1); + else + fsl_add_bridge(np, 0); + } #endif printk("MPC86xx HPCN board from Freescale Semiconductor\n"); diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 24ba1b6b31f..10c47b56702 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -1,136 +1,98 @@ /* - * MPC86XX pci setup code + * MPC85xx/86xx PCI/PCIE support routing. * - * Recode: ZHANG WEI <wei.zhang@freescale.com> - * Initial author: Xianghua Xiao <x.xiao@freescale.com> + * Copyright 2007 Freescale Semiconductor, Inc * - * Copyright 2006 Freescale Semiconductor Inc. + * Initial author: Xianghua Xiao <x.xiao@freescale.com> + * Recode: ZHANG WEI <wei.zhang@freescale.com> + * Rewrite the routing for Frescale PCI and PCI Express + * Roy Zang <tie-fei.zang@freescale.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/init.h> +#include <linux/kernel.h> #include <linux/pci.h> -#include <linux/serial.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> -#include <asm/system.h> -#include <asm/atomic.h> #include <asm/io.h> #include <asm/prom.h> #include <asm/pci-bridge.h> +#include <asm/machdep.h> #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> -#include "../platforms/86xx/mpc86xx.h" - -#undef DEBUG - -#ifdef DEBUG -#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args) -#else -#define DBG(fmt, args...) -#endif - -struct pcie_outbound_window_regs { - uint pexotar; /* 0x.0 - PCI Express outbound translation address register */ - uint pexotear; /* 0x.4 - PCI Express outbound translation extended address register */ - uint pexowbar; /* 0x.8 - PCI Express outbound window base address register */ - char res1[4]; - uint pexowar; /* 0x.10 - PCI Express outbound window attributes register */ - char res2[12]; -}; - -struct pcie_inbound_window_regs { - uint pexitar; /* 0x.0 - PCI Express inbound translation address register */ - char res1[4]; - uint pexiwbar; /* 0x.8 - PCI Express inbound window base address register */ - uint pexiwbear; /* 0x.c - PCI Express inbound window base extended address register */ - uint pexiwar; /* 0x.10 - PCI Express inbound window attributes register */ - char res2[12]; -}; - -static void __init setup_pcie_atmu(struct pci_controller *hose, struct resource *rsrc) +/* atmu setup for fsl pci/pcie controller */ +void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc) { - volatile struct ccsr_pex *pcie; - volatile struct pcie_outbound_window_regs *pcieow; - volatile struct pcie_inbound_window_regs *pcieiw; - int i = 0; + struct ccsr_pci __iomem *pci; + int i; - DBG("PCIE memory map start 0x%x, size 0x%x\n", rsrc->start, + pr_debug("PCI memory map start 0x%x, size 0x%x\n", rsrc->start, rsrc->end - rsrc->start + 1); - pcie = ioremap(rsrc->start, rsrc->end - rsrc->start + 1); - - /* Disable all windows (except pexowar0 since its ignored) */ - pcie->pexowar1 = 0; - pcie->pexowar2 = 0; - pcie->pexowar3 = 0; - pcie->pexowar4 = 0; - pcie->pexiwar1 = 0; - pcie->pexiwar2 = 0; - pcie->pexiwar3 = 0; - - pcieow = (struct pcie_outbound_window_regs *)&pcie->pexotar1; - pcieiw = (struct pcie_inbound_window_regs *)&pcie->pexitar1; - - /* Setup outbound MEM window */ - for(i = 0; i < 3; i++) - if (hose->mem_resources[i].flags & IORESOURCE_MEM){ - DBG("PCIE MEM resource start 0x%08x, size 0x%08x.\n", - hose->mem_resources[i].start, - hose->mem_resources[i].end - - hose->mem_resources[i].start + 1); - pcieow->pexotar = (hose->mem_resources[i].start) >> 12 - & 0x000fffff; - pcieow->pexotear = 0; - pcieow->pexowbar = (hose->mem_resources[i].start) >> 12 - & 0x000fffff; - /* Enable, Mem R/W */ - pcieow->pexowar = 0x80044000 | - (__ilog2(hose->mem_resources[i].end - - hose->mem_resources[i].start + 1) - - 1); - pcieow++; - } - - /* Setup outbound IO window */ - if (hose->io_resource.flags & IORESOURCE_IO){ - DBG("PCIE IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n", - hose->io_resource.start, - hose->io_resource.end - hose->io_resource.start + 1, - hose->io_base_phys); - pcieow->pexotar = (hose->io_resource.start) >> 12 & 0x000fffff; - pcieow->pexotear = 0; - pcieow->pexowbar = (hose->io_base_phys) >> 12 & 0x000fffff; - /* Enable, IO R/W */ - pcieow->pexowar = 0x80088000 | (__ilog2(hose->io_resource.end - - hose->io_resource.start + 1) - 1); - } - - /* Setup 2G inbound Memory Window @ 0 */ - pcieiw->pexitar = 0x00000000; - pcieiw->pexiwbar = 0x00000000; - /* Enable, Prefetch, Local Mem, Snoop R/W, 2G */ - pcieiw->pexiwar = 0xa0f5501e; + pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1); + + /* Disable all windows (except powar0 since its ignored) */ + for(i = 1; i < 5; i++) + out_be32(&pci->pow[i].powar, 0); + for(i = 0; i < 3; i++) + out_be32(&pci->piw[i].piwar, 0); + + /* Setup outbound MEM window */ + for(i = 0; i < 3; i++) + if (hose->mem_resources[i].flags & IORESOURCE_MEM){ + pr_debug("PCI MEM resource start 0x%08x, size 0x%08x.\n", + hose->mem_resources[i].start, + hose->mem_resources[i].end + - hose->mem_resources[i].start + 1); + out_be32(&pci->pow[i+1].potar, + (hose->mem_resources[i].start >> 12) + & 0x000fffff); + out_be32(&pci->pow[i+1].potear, 0); + out_be32(&pci->pow[i+1].powbar, + (hose->mem_resources[i].start >> 12) + & 0x000fffff); + /* Enable, Mem R/W */ + out_be32(&pci->pow[i+1].powar, 0x80044000 + | (__ilog2(hose->mem_resources[i].end + - hose->mem_resources[i].start + 1) - 1)); + } + + /* Setup outbound IO window */ + if (hose->io_resource.flags & IORESOURCE_IO){ + pr_debug("PCI IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n", + hose->io_resource.start, + hose->io_resource.end - hose->io_resource.start + 1, + hose->io_base_phys); + out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12) + & 0x000fffff); + out_be32(&pci->pow[i+1].potear, 0); + out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12) + & 0x000fffff); + /* Enable, IO R/W */ + out_be32(&pci->pow[i+1].powar, 0x80088000 + | (__ilog2(hose->io_resource.end + - hose->io_resource.start + 1) - 1)); + } + + /* Setup 2G inbound Memory Window @ 1 */ + out_be32(&pci->piw[2].pitar, 0x00000000); + out_be32(&pci->piw[2].piwbar,0x00000000); + out_be32(&pci->piw[2].piwar, PIWAR_2G); } -static void __init -mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size) +void __init setup_pci_cmd(struct pci_controller *hose) { u16 cmd; - - DBG("PCIE host controller register offset 0x%08x, size 0x%08x.\n", - pcie_offset, pcie_size); - early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd); cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY - | PCI_COMMAND_IO; + | PCI_COMMAND_IO; early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd); - early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80); } @@ -167,72 +129,76 @@ static void __devinit quirk_fsl_pcie_transparent(struct pci_dev *dev) } } +int __init fsl_pcie_check_link(struct pci_controller *hose) +{ + u16 val; + early_read_config_word(hose, 0, 0, PCIE_LTSSM, &val); + if (val < PCIE_LTSSM_L0) + return 1; + return 0; +} -DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7010, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7011, quirk_fsl_pcie_transparent); - -#define PCIE_LTSSM 0x404 /* PCIe Link Training and Status */ -#define PCIE_LTSSM_L0 0x16 /* L0 state */ - -int __init mpc86xx_add_bridge(struct device_node *dev) +int __init fsl_add_bridge(struct device_node *dev, int is_primary) { int len; struct pci_controller *hose; struct resource rsrc; const int *bus_range; - int has_address = 0; - int primary = 0; - u16 val; - DBG("Adding PCIE host bridge %s\n", dev->full_name); + pr_debug("Adding PCI host bridge %s\n", dev->full_name); /* Fetch host bridge registers address */ - has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); + if (of_address_to_resource(dev, 0, &rsrc)) { + printk(KERN_WARNING "Can't get pci register base!"); + return -ENOMEM; + } /* Get bus range if any */ bus_range = of_get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) printk(KERN_WARNING "Can't get bus-range for %s, assume" - " bus 0\n", dev->full_name); + " bus 0\n", dev->full_name); pci_assign_all_buses = 1; hose = pcibios_alloc_controller(dev); if (!hose) return -ENOMEM; - hose->indirect_type = PPC_INDIRECT_TYPE_EXT_REG | - PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS; - hose->first_busno = bus_range ? bus_range[0] : 0x0; hose->last_busno = bus_range ? bus_range[1] : 0xff; - setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4); - - /* Probe the hose link training status */ - early_read_config_word(hose, 0, 0, PCIE_LTSSM, &val); - if (val < PCIE_LTSSM_L0) - return -ENXIO; + /* check PCI express bridge */ + if (of_device_is_compatible(dev, "fsl,mpc8548-pcie") || + of_device_is_compatible(dev, "fsl,mpc8641-pcie")) + hose->indirect_type = PPC_INDIRECT_TYPE_EXT_REG | + PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS; - /* Setup the PCIE host controller. */ - mpc86xx_setup_pcie(hose, rsrc.start, rsrc.end - rsrc.start + 1); + setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4); + setup_pci_cmd(hose); - if ((rsrc.start & 0xfffff) == 0x8000) - primary = 1; + /* check PCI express link status */ + if (of_device_is_compatible(dev, "fsl,mpc8548-pcie") || + of_device_is_compatible(dev, "fsl,mpc8641-pcie")) + if (fsl_pcie_check_link(hose)) + return -ENXIO; - printk(KERN_INFO "Found MPC86xx PCIE host bridge at 0x%08lx. " - "Firmware bus number: %d->%d\n", - (unsigned long) rsrc.start, - hose->first_busno, hose->last_busno); + printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx." + "Firmware bus number: %d->%d\n", + (unsigned long long)rsrc.start, hose->first_busno, + hose->last_busno); - DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", + pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", hose, hose->cfg_addr, hose->cfg_data); /* Interpret the "ranges" property */ /* This also maps the I/O region and sets isa_io/mem_base */ - pci_process_bridge_OF_ranges(hose, dev, primary); + pci_process_bridge_OF_ranges(hose, dev, is_primary); /* Setup PEX window registers */ - setup_pcie_atmu(hose, &rsrc); + setup_pci_atmu(hose, &rsrc); return 0; } + +DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7010, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7011, quirk_fsl_pcie_transparent); diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h index 8d9779c84be..700d4782799 100644 --- a/arch/powerpc/sysdev/fsl_pci.h +++ b/arch/powerpc/sysdev/fsl_pci.h @@ -11,84 +11,77 @@ */ #ifdef __KERNEL__ -#ifndef __POWERPC_FSL_PCIE_H -#define __POWERPC_FSL_PCIE_H +#ifndef __POWERPC_FSL_PCI_H +#define __POWERPC_FSL_PCI_H -/* PCIE Express IO block registers in 85xx/86xx */ +#define PCIE_LTSSM 0x0404 /* PCIE Link Training and Status */ +#define PCIE_LTSSM_L0 0x16 /* L0 state */ +#define PIWAR_2G 0xa0f5501e /* Enable, Prefetch, Local Mem, Snoop R/W, 2G */ -struct ccsr_pex { - __be32 __iomem pex_config_addr; /* 0x.000 - PCI Express Configuration Address Register */ - __be32 __iomem pex_config_data; /* 0x.004 - PCI Express Configuration Data Register */ - u8 __iomem res1[4]; - __be32 __iomem pex_otb_cpl_tor; /* 0x.00c - PCI Express Outbound completion timeout register */ - __be32 __iomem pex_conf_tor; /* 0x.010 - PCI Express configuration timeout register */ - u8 __iomem res2[12]; - __be32 __iomem pex_pme_mes_dr; /* 0x.020 - PCI Express PME and message detect register */ - __be32 __iomem pex_pme_mes_disr; /* 0x.024 - PCI Express PME and message disable register */ - __be32 __iomem pex_pme_mes_ier; /* 0x.028 - PCI Express PME and message interrupt enable register */ - __be32 __iomem pex_pmcr; /* 0x.02c - PCI Express power management command register */ - u8 __iomem res3[3024]; - __be32 __iomem pexotar0; /* 0x.c00 - PCI Express outbound translation address register 0 */ - __be32 __iomem pexotear0; /* 0x.c04 - PCI Express outbound translation extended address register 0*/ - u8 __iomem res4[8]; - __be32 __iomem pexowar0; /* 0x.c10 - PCI Express outbound window attributes register 0*/ - u8 __iomem res5[12]; - __be32 __iomem pexotar1; /* 0x.c20 - PCI Express outbound translation address register 1 */ - __be32 __iomem pexotear1; /* 0x.c24 - PCI Express outbound translation extended address register 1*/ - __be32 __iomem pexowbar1; /* 0x.c28 - PCI Express outbound window base address register 1*/ - u8 __iomem res6[4]; - __be32 __iomem pexowar1; /* 0x.c30 - PCI Express outbound window attributes register 1*/ - u8 __iomem res7[12]; - __be32 __iomem pexotar2; /* 0x.c40 - PCI Express outbound translation address register 2 */ - __be32 __iomem pexotear2; /* 0x.c44 - PCI Express outbound translation extended address register 2*/ - __be32 __iomem pexowbar2; /* 0x.c48 - PCI Express outbound window base address register 2*/ - u8 __iomem res8[4]; - __be32 __iomem pexowar2; /* 0x.c50 - PCI Express outbound window attributes register 2*/ - u8 __iomem res9[12]; - __be32 __iomem pexotar3; /* 0x.c60 - PCI Express outbound translation address register 3 */ - __be32 __iomem pexotear3; /* 0x.c64 - PCI Express outbound translation extended address register 3*/ - __be32 __iomem pexowbar3; /* 0x.c68 - PCI Express outbound window base address register 3*/ - u8 __iomem res10[4]; - __be32 __iomem pexowar3; /* 0x.c70 - PCI Express outbound window attributes register 3*/ - u8 __iomem res11[12]; - __be32 __iomem pexotar4; /* 0x.c80 - PCI Express outbound translation address register 4 */ - __be32 __iomem pexotear4; /* 0x.c84 - PCI Express outbound translation extended address register 4*/ - __be32 __iomem pexowbar4; /* 0x.c88 - PCI Express outbound window base address register 4*/ - u8 __iomem res12[4]; - __be32 __iomem pexowar4; /* 0x.c90 - PCI Express outbound window attributes register 4*/ - u8 __iomem res13[12]; - u8 __iomem res14[256]; - __be32 __iomem pexitar3; /* 0x.da0 - PCI Express inbound translation address register 3 */ - u8 __iomem res15[4]; - __be32 __iomem pexiwbar3; /* 0x.da8 - PCI Express inbound window base address register 3 */ - __be32 __iomem pexiwbear3; /* 0x.dac - PCI Express inbound window base extended address register 3 */ - __be32 __iomem pexiwar3; /* 0x.db0 - PCI Express inbound window attributes register 3 */ - u8 __iomem res16[12]; - __be32 __iomem pexitar2; /* 0x.dc0 - PCI Express inbound translation address register 2 */ - u8 __iomem res17[4]; - __be32 __iomem pexiwbar2; /* 0x.dc8 - PCI Express inbound window base address register 2 */ - __be32 __iomem pexiwbear2; /* 0x.dcc - PCI Express inbound window base extended address register 2 */ - __be32 __iomem pexiwar2; /* 0x.dd0 - PCI Express inbound window attributes register 2 */ - u8 __iomem res18[12]; - __be32 __iomem pexitar1; /* 0x.de0 - PCI Express inbound translation address register 2 */ - u8 __iomem res19[4]; - __be32 __iomem pexiwbar1; /* 0x.de8 - PCI Express inbound window base address register 2 */ - __be32 __iomem pexiwbear1; /* 0x.dec - PCI Express inbound window base extended address register 2 */ - __be32 __iomem pexiwar1; /* 0x.df0 - PCI Express inbound window attributes register 2 */ - u8 __iomem res20[12]; - __be32 __iomem pex_err_dr; /* 0x.e00 - PCI Express error detect register */ - u8 __iomem res21[4]; - __be32 __iomem pex_err_en; /* 0x.e08 - PCI Express error interrupt enable register */ - u8 __iomem res22[4]; - __be32 __iomem pex_err_disr; /* 0x.e10 - PCI Express error disable register */ - u8 __iomem res23[12]; - __be32 __iomem pex_err_cap_stat; /* 0x.e20 - PCI Express error capture status register */ - u8 __iomem res24[4]; - __be32 __iomem pex_err_cap_r0; /* 0x.e28 - PCI Express error capture register 0 */ - __be32 __iomem pex_err_cap_r1; /* 0x.e2c - PCI Express error capture register 0 */ - __be32 __iomem pex_err_cap_r2; /* 0x.e30 - PCI Express error capture register 0 */ - __be32 __iomem pex_err_cap_r3; /* 0x.e34 - PCI Express error capture register 0 */ +/* PCI/PCI Express outbound window reg */ +struct pci_outbound_window_regs { + __be32 potar; /* 0x.0 - Outbound translation address register */ + __be32 potear; /* 0x.4 - Outbound translation extended address register */ + __be32 powbar; /* 0x.8 - Outbound window base address register */ + u8 res1[4]; + __be32 powar; /* 0x.10 - Outbound window attributes register */ + u8 res2[12]; }; -#endif /* __POWERPC_FSL_PCIE_H */ +/* PCI/PCI Express inbound window reg */ +struct pci_inbound_window_regs { + __be32 pitar; /* 0x.0 - Inbound translation address register */ + u8 res1[4]; + __be32 piwbar; /* 0x.8 - Inbound window base address register */ + __be32 piwbear; /* 0x.c - Inbound window base extended address register */ + __be32 piwar; /* 0x.10 - Inbound window attributes register */ + u8 res2[12]; +}; + +/* PCI/PCI Express IO block registers for 85xx/86xx */ +struct ccsr_pci { + __be32 config_addr; /* 0x.000 - PCI/PCIE Configuration Address Register */ + __be32 config_data; /* 0x.004 - PCI/PCIE Configuration Data Register */ + __be32 int_ack; /* 0x.008 - PCI Interrupt Acknowledge Register */ + __be32 pex_otb_cpl_tor; /* 0x.00c - PCIE Outbound completion timeout register */ + __be32 pex_conf_tor; /* 0x.010 - PCIE configuration timeout register */ + u8 res2[12]; + __be32 pex_pme_mes_dr; /* 0x.020 - PCIE PME and message detect register */ + __be32 pex_pme_mes_disr; /* 0x.024 - PCIE PME and message disable register */ + __be32 pex_pme_mes_ier; /* 0x.028 - PCIE PME and message interrupt enable register */ + __be32 pex_pmcr; /* 0x.02c - PCIE power management command register */ + u8 res3[3024]; + +/* PCI/PCI Express outbound window 0-4 + * Window 0 is the default window and is the only window enabled upon reset. + * The default outbound register set is used when a transaction misses + * in all of the other outbound windows. + */ + struct pci_outbound_window_regs pow[5]; + + u8 res14[256]; + +/* PCI/PCI Express inbound window 3-1 + * inbound window 1 supports only a 32-bit base address and does not + * define an inbound window base extended address register. + */ + struct pci_inbound_window_regs piw[3]; + + __be32 pex_err_dr; /* 0x.e00 - PCI/PCIE error detect register */ + u8 res21[4]; + __be32 pex_err_en; /* 0x.e08 - PCI/PCIE error interrupt enable register */ + u8 res22[4]; + __be32 pex_err_disr; /* 0x.e10 - PCI/PCIE error disable register */ + u8 res23[12]; + __be32 pex_err_cap_stat; /* 0x.e20 - PCI/PCIE error capture status register */ + u8 res24[4]; + __be32 pex_err_cap_r0; /* 0x.e28 - PCIE error capture register 0 */ + __be32 pex_err_cap_r1; /* 0x.e2c - PCIE error capture register 0 */ + __be32 pex_err_cap_r2; /* 0x.e30 - PCIE error capture register 0 */ + __be32 pex_err_cap_r3; /* 0x.e34 - PCIE error capture register 0 */ +}; + +extern int fsl_add_bridge(struct device_node *dev, int is_primary); + +#endif /* __POWERPC_FSL_PCI_H */ #endif /* __KERNEL__ */ |