diff options
Diffstat (limited to 'arch/powerpc')
128 files changed, 3436 insertions, 1597 deletions
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 6c1e36c33fa..6015a92bc2a 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -63,8 +63,7 @@ endif LDFLAGS_vmlinux := -Bstatic -# The -Iarch/$(ARCH)/include is temporary while we are merging -CPPFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) -Iarch/$(ARCH)/include +CPPFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) AFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=none -mcall-aixdesc CFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) -ffixed-r2 -mmultiple @@ -72,9 +71,6 @@ CPPFLAGS += $(CPPFLAGS-y) AFLAGS += $(AFLAGS-y) CFLAGS += -msoft-float -pipe $(CFLAGS-y) CPP = $(CC) -E $(CFLAGS) -# Temporary hack until we have migrated to asm-powerpc -LINUXINCLUDE-$(CONFIG_PPC32) := -Iarch/$(ARCH)/include -LINUXINCLUDE += $(LINUXINCLUDE-y) CHECKFLAGS += -m$(SZ) -D__powerpc__ -D__powerpc$(SZ)__ @@ -123,7 +119,7 @@ CFLAGS += $(cpu-as-y) head-y := arch/powerpc/kernel/head_32.o head-$(CONFIG_PPC64) := arch/powerpc/kernel/head_64.o head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o -head-$(CONFIG_4xx) := arch/powerpc/kernel/head_4xx.o +head-$(CONFIG_40x) := arch/powerpc/kernel/head_40x.o head-$(CONFIG_44x) := arch/powerpc/kernel/head_44x.o head-$(CONFIG_FSL_BOOKE) := arch/powerpc/kernel/head_fsl_booke.o @@ -172,19 +168,8 @@ install: archclean: $(Q)$(MAKE) $(clean)=$(boot) -archmrproper: - $(Q)rm -rf arch/$(ARCH)/include - archprepare: checkbin -ifeq ($(CONFIG_PPC32),y) -# Temporary hack until we have migrated to asm-powerpc -include/asm: arch/$(ARCH)/include/asm -arch/$(ARCH)/include/asm: FORCE - $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi - $(Q)ln -fsn $(srctree)/include/asm-$(OLDARCH) arch/$(ARCH)/include/asm -endif - # Use the file '.tmp_gas_check' for binutils tests, as gas won't output # to stdout and these checks are run even on install targets. TOUT := .tmp_gas_check diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore index eec7af7e599..2c187ca0598 100644 --- a/arch/powerpc/boot/.gitignore +++ b/arch/powerpc/boot/.gitignore @@ -18,14 +18,14 @@ kernel-vmlinux.strip.c kernel-vmlinux.strip.gz mktree uImage -cuImage -cuImage.bin.gz -cuImage.elf +cuImage.* zImage +zImage.bin.* zImage.chrp zImage.coff zImage.coff.lds -zImage.lds +zImage.ep* +zImage.*lds zImage.miboot zImage.pmac zImage.pseries diff --git a/arch/powerpc/boot/44x.c b/arch/powerpc/boot/44x.c deleted file mode 100644 index 9f64e840bef..00000000000 --- a/arch/powerpc/boot/44x.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright 2007 David Gibson, IBM Corporation. - * - * Based on earlier code: - * Matt Porter <mporter@kernel.crashing.org> - * Copyright 2002-2005 MontaVista Software Inc. - * - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * Copyright (c) 2003, 2004 Zultys Technologies - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <stddef.h> -#include "types.h" -#include "string.h" -#include "stdio.h" -#include "ops.h" -#include "reg.h" -#include "dcr.h" - -/* Read the 44x memory controller to get size of system memory. */ -void ibm44x_fixup_memsize(void) -{ - int i; - unsigned long memsize, bank_config; - - memsize = 0; - for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) { - mtdcr(DCRN_SDRAM0_CFGADDR, sdram_bxcr[i]); - bank_config = mfdcr(DCRN_SDRAM0_CFGDATA); - - if (bank_config & SDRAM_CONFIG_BANK_ENABLE) - memsize += SDRAM_CONFIG_BANK_SIZE(bank_config); - } - - dt_fixup_memory(0, memsize); -} - -#define SPRN_DBCR0 0x134 -#define DBCR0_RST_SYSTEM 0x30000000 - -void ibm44x_dbcr_reset(void) -{ - unsigned long tmp; - - asm volatile ( - "mfspr %0,%1\n" - "oris %0,%0,%2@h\n" - "mtspr %1,%0" - : "=&r"(tmp) : "i"(SPRN_DBCR0), "i"(DBCR0_RST_SYSTEM) - ); - -} - -/* Read 4xx EBC bus bridge registers to get mappings of the peripheral - * banks into the OPB address space */ -void ibm4xx_fixup_ebc_ranges(const char *ebc) -{ - void *devp; - u32 bxcr; - u32 ranges[EBC_NUM_BANKS*4]; - u32 *p = ranges; - int i; - - for (i = 0; i < EBC_NUM_BANKS; i++) { - mtdcr(DCRN_EBC0_CFGADDR, EBC_BXCR(i)); - bxcr = mfdcr(DCRN_EBC0_CFGDATA); - - if ((bxcr & EBC_BXCR_BU) != EBC_BXCR_BU_OFF) { - *p++ = i; - *p++ = 0; - *p++ = bxcr & EBC_BXCR_BAS; - *p++ = EBC_BXCR_BANK_SIZE(bxcr); - } - } - - devp = finddevice(ebc); - if (! devp) - fatal("Couldn't locate EBC node %s\n\r", ebc); - - setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32)); -} diff --git a/arch/powerpc/boot/44x.h b/arch/powerpc/boot/44x.h index 577982c9a3c..ad33dcc95ae 100644 --- a/arch/powerpc/boot/44x.h +++ b/arch/powerpc/boot/44x.h @@ -10,10 +10,7 @@ #ifndef _PPC_BOOT_44X_H_ #define _PPC_BOOT_44X_H_ -void ibm44x_fixup_memsize(void); -void ibm4xx_fixup_ebc_ranges(const char *ebc); - -void ibm44x_dbcr_reset(void); void ebony_init(void *mac0, void *mac1); +void bamboo_init(void); #endif /* _PPC_BOOT_44X_H_ */ diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c new file mode 100644 index 00000000000..642d8780bb3 --- /dev/null +++ b/arch/powerpc/boot/4xx.c @@ -0,0 +1,192 @@ +/* + * Copyright 2007 David Gibson, IBM Corporation. + * + * Based on earlier code: + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003, 2004 Zultys Technologies + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <stddef.h> +#include "types.h" +#include "string.h" +#include "stdio.h" +#include "ops.h" +#include "reg.h" +#include "dcr.h" + +/* Read the 4xx SDRAM controller to get size of system memory. */ +void ibm4xx_fixup_memsize(void) +{ + int i; + unsigned long memsize, bank_config; + + memsize = 0; + for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) { + mtdcr(DCRN_SDRAM0_CFGADDR, sdram_bxcr[i]); + bank_config = mfdcr(DCRN_SDRAM0_CFGDATA); + + if (bank_config & SDRAM_CONFIG_BANK_ENABLE) + memsize += SDRAM_CONFIG_BANK_SIZE(bank_config); + } + + dt_fixup_memory(0, memsize); +} + +#define SPRN_DBCR0_40X 0x3F2 +#define SPRN_DBCR0_44X 0x134 +#define DBCR0_RST_SYSTEM 0x30000000 + +void ibm44x_dbcr_reset(void) +{ + unsigned long tmp; + + asm volatile ( + "mfspr %0,%1\n" + "oris %0,%0,%2@h\n" + "mtspr %1,%0" + : "=&r"(tmp) : "i"(SPRN_DBCR0_44X), "i"(DBCR0_RST_SYSTEM) + ); + +} + +void ibm40x_dbcr_reset(void) +{ + unsigned long tmp; + + asm volatile ( + "mfspr %0,%1\n" + "oris %0,%0,%2@h\n" + "mtspr %1,%0" + : "=&r"(tmp) : "i"(SPRN_DBCR0_40X), "i"(DBCR0_RST_SYSTEM) + ); +} + +#define EMAC_RESET 0x20000000 +void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1) +{ + /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't do this for us */ + if (emac0) + *emac0 = EMAC_RESET; + if (emac1) + *emac1 = EMAC_RESET; + + mtdcr(DCRN_MAL0_CFG, MAL_RESET); +} + +/* Read 4xx EBC bus bridge registers to get mappings of the peripheral + * banks into the OPB address space */ +void ibm4xx_fixup_ebc_ranges(const char *ebc) +{ + void *devp; + u32 bxcr; + u32 ranges[EBC_NUM_BANKS*4]; + u32 *p = ranges; + int i; + + for (i = 0; i < EBC_NUM_BANKS; i++) { + mtdcr(DCRN_EBC0_CFGADDR, EBC_BXCR(i)); + bxcr = mfdcr(DCRN_EBC0_CFGDATA); + + if ((bxcr & EBC_BXCR_BU) != EBC_BXCR_BU_OFF) { + *p++ = i; + *p++ = 0; + *p++ = bxcr & EBC_BXCR_BAS; + *p++ = EBC_BXCR_BANK_SIZE(bxcr); + } + } + + devp = finddevice(ebc); + if (! devp) + fatal("Couldn't locate EBC node %s\n\r", ebc); + + setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32)); +} + +#define SPRN_CCR1 0x378 +void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk) +{ + u32 cpu, plb, opb, ebc, tb, uart0, m, vco; + u32 reg; + u32 fwdva, fwdvb, fbdv, lfbdv, opbdv0, perdv0, spcid0, prbdv0, tmp; + + mtdcr(DCRN_CPR0_ADDR, CPR0_PLLD0); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x000F0000) >> 16; + fwdva = tmp ? tmp : 16; + tmp = (reg & 0x00000700) >> 8; + fwdvb = tmp ? tmp : 8; + tmp = (reg & 0x1F000000) >> 24; + fbdv = tmp ? tmp : 32; + lfbdv = (reg & 0x0000007F); + + mtdcr(DCRN_CPR0_ADDR, CPR0_OPBD0); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x03000000) >> 24; + opbdv0 = tmp ? tmp : 4; + + mtdcr(DCRN_CPR0_ADDR, CPR0_PERD0); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x07000000) >> 24; + perdv0 = tmp ? tmp : 8; + + mtdcr(DCRN_CPR0_ADDR, CPR0_PRIMBD0); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x07000000) >> 24; + prbdv0 = tmp ? tmp : 8; + + mtdcr(DCRN_CPR0_ADDR, CPR0_SCPID); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x03000000) >> 24; + spcid0 = tmp ? tmp : 4; + + /* Calculate M */ + mtdcr(DCRN_CPR0_ADDR, CPR0_PLLC0); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x03000000) >> 24; + if (tmp == 0) { /* PLL output */ + tmp = (reg & 0x20000000) >> 29; + if (!tmp) /* PLLOUTA */ + m = fbdv * lfbdv * fwdva; + else + m = fbdv * lfbdv * fwdvb; + } + else if (tmp == 1) /* CPU output */ + m = fbdv * fwdva; + else + m = perdv0 * opbdv0 * fwdvb; + + vco = (m * sysclk) + (m >> 1); + cpu = vco / fwdva; + plb = vco / fwdvb / prbdv0; + opb = plb / opbdv0; + ebc = plb / perdv0; + + /* FIXME */ + uart0 = ser_clk; + + /* Figure out timebase. Either CPU or default TmrClk */ + asm volatile ( + "mfspr %0,%1\n" + : + "=&r"(reg) : "i"(SPRN_CCR1)); + if (reg & 0x0080) + tb = 25000000; /* TmrClk is 25MHz */ + else + tb = cpu; + + dt_fixup_cpu_clocks(cpu, tb, 0); + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/opb/ebc", ebc); + dt_fixup_clock("/plb/opb/serial@ef600300", uart0); + dt_fixup_clock("/plb/opb/serial@ef600400", uart0); + dt_fixup_clock("/plb/opb/serial@ef600500", uart0); + dt_fixup_clock("/plb/opb/serial@ef600600", uart0); +} diff --git a/arch/powerpc/boot/4xx.h b/arch/powerpc/boot/4xx.h new file mode 100644 index 00000000000..8f26e480dcd --- /dev/null +++ b/arch/powerpc/boot/4xx.h @@ -0,0 +1,21 @@ +/* + * PowerPC 4xx related functions + * + * Copyright 2007 IBM Corporation. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#ifndef _POWERPC_BOOT_4XX_H_ +#define _POWERPC_BOOT_4XX_H_ + +void ibm4xx_fixup_memsize(void); +void ibm44x_dbcr_reset(void); +void ibm40x_dbcr_reset(void); +void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1); +void ibm4xx_fixup_ebc_ranges(const char *ebc); +void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk); + +#endif /* _POWERPC_BOOT_4XX_H_ */ diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 61a6f34ca5e..cd7c05769e4 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -31,7 +31,7 @@ endif BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -$(obj)/44x.o: BOOTCFLAGS += -mcpu=440 +$(obj)/4xx.o: BOOTCFLAGS += -mcpu=440 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=440 zlib := inffast.c inflate.c inftrees.c @@ -44,10 +44,11 @@ $(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \ src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \ gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \ - 44x.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c + 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \ + cpm-serial.c src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \ cuboot-ebony.c treeboot-ebony.c prpmc2800.c \ - ps3-head.S ps3-hvcall.S ps3.c + ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c cuboot-pq2.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -139,9 +140,12 @@ image-$(CONFIG_PPC_ISERIES) += zImage.iseries image-$(CONFIG_DEFAULT_UIMAGE) += uImage ifneq ($(CONFIG_DEVICE_TREE),"") +image-$(CONFIG_PPC_8xx) += cuImage.8xx +image-$(CONFIG_8260) += cuImage.pq2 image-$(CONFIG_PPC_83xx) += cuImage.83xx image-$(CONFIG_PPC_85xx) += cuImage.85xx image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony +image-$(CONFIG_BAMBOO) += treeImage.bamboo endif # For 32-bit powermacs, build the COFF and miboot images diff --git a/arch/powerpc/boot/bamboo.c b/arch/powerpc/boot/bamboo.c new file mode 100644 index 00000000000..bc097694b44 --- /dev/null +++ b/arch/powerpc/boot/bamboo.c @@ -0,0 +1,45 @@ +/* + * Copyright IBM Corporation, 2007 + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Based on ebony wrapper: + * Copyright 2007 David Gibson, IBM Corporation. + * + * Clocking code based on code by: + * Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 of the License + */ +#include <stdarg.h> +#include <stddef.h> +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" + +extern char _dtb_start[]; +extern char _dtb_end[]; + +static void bamboo_fixups(void) +{ + unsigned long sysclk = 33333333; + + ibm440ep_fixup_clocks(sysclk, 11059200); + ibm4xx_fixup_memsize(); + ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00); +} + +void bamboo_init(void) +{ + platform_ops.fixups = bamboo_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + ft_init(_dtb_start, 0, 32); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cpm-serial.c b/arch/powerpc/boot/cpm-serial.c new file mode 100644 index 00000000000..fcb8b5e956b --- /dev/null +++ b/arch/powerpc/boot/cpm-serial.c @@ -0,0 +1,249 @@ +/* + * CPM serial console support. + * + * Copyright 2007 Freescale Semiconductor, Inc. + * Author: Scott Wood <scottwood@freescale.com> + * + * It is assumed that the firmware (or the platform file) has already set + * up the port. + */ + +#include "types.h" +#include "io.h" +#include "ops.h" + +struct cpm_scc { + u32 gsmrl; + u32 gsmrh; + u16 psmr; + u8 res1[2]; + u16 todr; + u16 dsr; + u16 scce; + u8 res2[2]; + u16 sccm; + u8 res3; + u8 sccs; + u8 res4[8]; +}; + +struct cpm_smc { + u8 res1[2]; + u16 smcmr; + u8 res2[2]; + u8 smce; + u8 res3[3]; + u8 smcm; + u8 res4[5]; +}; + +struct cpm_param { + u16 rbase; + u16 tbase; + u8 rfcr; + u8 tfcr; +}; + +struct cpm_bd { + u16 sc; /* Status and Control */ + u16 len; /* Data length in buffer */ + u8 *addr; /* Buffer address in host memory */ +}; + +static void *cpcr; +static struct cpm_param *param; +static struct cpm_smc *smc; +static struct cpm_scc *scc; +struct cpm_bd *tbdf, *rbdf; +static u32 cpm_cmd; +static u8 *dpram_start; + +static void (*do_cmd)(int op); +static void (*enable_port)(void); +static void (*disable_port)(void); + +#define CPM_CMD_STOP_TX 4 +#define CPM_CMD_RESTART_TX 6 +#define CPM_CMD_INIT_RX_TX 0 + +static void cpm1_cmd(int op) +{ + while (in_be16(cpcr) & 1) + ; + + out_be16(cpcr, (op << 8) | cpm_cmd | 1); + + while (in_be16(cpcr) & 1) + ; +} + +static void cpm2_cmd(int op) +{ + while (in_be32(cpcr) & 0x10000) + ; + + out_be32(cpcr, op | cpm_cmd | 0x10000); + + while (in_be32(cpcr) & 0x10000) + ; +} + +static void smc_disable_port(void) +{ + do_cmd(CPM_CMD_STOP_TX); + out_be16(&smc->smcmr, in_be16(&smc->smcmr) & ~3); +} + +static void scc_disable_port(void) +{ + do_cmd(CPM_CMD_STOP_TX); + out_be32(&scc->gsmrl, in_be32(&scc->gsmrl) & ~0x30); +} + +static void smc_enable_port(void) +{ + out_be16(&smc->smcmr, in_be16(&smc->smcmr) | 3); + do_cmd(CPM_CMD_RESTART_TX); +} + +static void scc_enable_port(void) +{ + out_be32(&scc->gsmrl, in_be32(&scc->gsmrl) | 0x30); + do_cmd(CPM_CMD_RESTART_TX); +} + +static int cpm_serial_open(void) +{ + int dpaddr = 0x800; + disable_port(); + + out_8(¶m->rfcr, 0x10); + out_8(¶m->tfcr, 0x10); + + rbdf = (struct cpm_bd *)(dpram_start + dpaddr); + rbdf->addr = (u8 *)(rbdf + 2); + rbdf->sc = 0xa000; + rbdf->len = 1; + + tbdf = rbdf + 1; + tbdf->addr = (u8 *)(rbdf + 2) + 1; + tbdf->sc = 0x2000; + tbdf->len = 1; + + sync(); + out_be16(¶m->rbase, dpaddr); + out_be16(¶m->tbase, dpaddr + sizeof(struct cpm_bd)); + + do_cmd(CPM_CMD_INIT_RX_TX); + + enable_port(); + return 0; +} + +static void cpm_serial_putc(unsigned char c) +{ + while (tbdf->sc & 0x8000) + barrier(); + + sync(); + + tbdf->addr[0] = c; + eieio(); + tbdf->sc |= 0x8000; +} + +static unsigned char cpm_serial_tstc(void) +{ + barrier(); + return !(rbdf->sc & 0x8000); +} + +static unsigned char cpm_serial_getc(void) +{ + unsigned char c; + + while (!cpm_serial_tstc()) + ; + + sync(); + c = rbdf->addr[0]; + eieio(); + rbdf->sc |= 0x8000; + + return c; +} + +int cpm_console_init(void *devp, struct serial_console_data *scdp) +{ + void *reg_virt[2]; + int is_smc = 0, is_cpm2 = 0, n; + unsigned long reg_phys; + void *parent; + + if (dt_is_compatible(devp, "fsl,cpm1-smc-uart")) { + is_smc = 1; + } else if (dt_is_compatible(devp, "fsl,cpm2-scc-uart")) { + is_cpm2 = 1; + } else if (dt_is_compatible(devp, "fsl,cpm2-smc-uart")) { + is_cpm2 = 1; + is_smc = 1; + } + + if (is_smc) { + enable_port = smc_enable_port; + disable_port = smc_disable_port; + } else { + enable_port = scc_enable_port; + disable_port = scc_disable_port; + } + + if (is_cpm2) + do_cmd = cpm2_cmd; + else + do_cmd = cpm1_cmd; + + n = getprop(devp, "fsl,cpm-command", &cpm_cmd, 4); + if (n < 4) + return -1; + + n = getprop(devp, "virtual-reg", reg_virt, sizeof(reg_virt)); + if (n < (int)sizeof(reg_virt)) { + for (n = 0; n < 2; n++) { + if (!dt_xlate_reg(devp, n, ®_phys, NULL)) + return -1; + + reg_virt[n] = (void *)reg_phys; + } + } + + if (is_smc) + smc = reg_virt[0]; + else + scc = reg_virt[0]; + + param = reg_virt[1]; + + parent = get_parent(devp); + if (!parent) + return -1; + + n = getprop(parent, "virtual-reg", reg_virt, sizeof(reg_virt)); + if (n < (int)sizeof(reg_virt)) { + for (n = 0; n < 2; n++) { + if (!dt_xlate_reg(parent, n, ®_phys, NULL)) + return -1; + + reg_virt[n] = (void *)reg_phys; + } + } + + cpcr = reg_virt[0]; + dpram_start = reg_virt[1]; + + scdp->open = cpm_serial_open; + scdp->putc = cpm_serial_putc; + scdp->getc = cpm_serial_getc; + scdp->tstc = cpm_serial_tstc; + + return 0; +} diff --git a/arch/powerpc/boot/cuboot-83xx.c b/arch/powerpc/boot/cuboot-83xx.c index 296025d8b29..a0505509abc 100644 --- a/arch/powerpc/boot/cuboot-83xx.c +++ b/arch/powerpc/boot/cuboot-83xx.c @@ -18,7 +18,6 @@ #include "ppcboot.h" static bd_t bd; -extern char _dtb_start[], _dtb_end[]; static void platform_fixups(void) { diff --git a/arch/powerpc/boot/cuboot-85xx.c b/arch/powerpc/boot/cuboot-85xx.c index 10f0f697c93..345dcbecef0 100644 --- a/arch/powerpc/boot/cuboot-85xx.c +++ b/arch/powerpc/boot/cuboot-85xx.c @@ -18,7 +18,6 @@ #include "ppcboot.h" static bd_t bd; -extern char _dtb_start[], _dtb_end[]; static void platform_fixups(void) { diff --git a/arch/powerpc/boot/cuboot-8xx.c b/arch/powerpc/boot/cuboot-8xx.c new file mode 100644 index 00000000000..88ed84015a8 --- /dev/null +++ b/arch/powerpc/boot/cuboot-8xx.c @@ -0,0 +1,45 @@ +/* + * Old U-boot compatibility for 8xx + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" + +#define TARGET_8xx +#define TARGET_HAS_ETH1 +#include "ppcboot.h" + +static bd_t bd; + +static void platform_fixups(void) +{ + void *node; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq); + + node = finddevice("/soc/cpm"); + if (node) { + setprop(node, "clock-frequency", &bd.bi_busfreq, 4); + setprop(node, "fsl,brg-frequency", &bd.bi_busfreq, 4); + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-pq2.c b/arch/powerpc/boot/cuboot-pq2.c new file mode 100644 index 00000000000..8021fd4a43b --- /dev/null +++ b/arch/powerpc/boot/cuboot-pq2.c @@ -0,0 +1,283 @@ +/* + * Old U-boot compatibility for PowerQUICC II + * (a.k.a. 82xx with CPM, not the 8240 family of chips) + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" +#include "io.h" + +#define TARGET_CPM2 +#define TARGET_HAS_ETH1 +#include "ppcboot.h" + +static bd_t bd; + +struct cs_range { + u32 csnum; + u32 base; /* must be zero */ + u32 addr; + u32 size; +}; + +struct pci_range { + u32 flags; + u32 pci_addr[2]; + u32 phys_addr; + u32 size[2]; +}; + +struct cs_range cs_ranges_buf[MAX_PROP_LEN / sizeof(struct cs_range)]; +struct pci_range pci_ranges_buf[MAX_PROP_LEN / sizeof(struct pci_range)]; + +/* Different versions of u-boot put the BCSR in different places, and + * some don't set up the PCI PIC at all, so we assume the device tree is + * sane and update the BRx registers appropriately. + * + * For any node defined as compatible with fsl,pq2-chipselect, + * #address/#size must be 2/1 for chipselect bus, 1/1 for parent bus, + * and ranges must be for whole chip selects. + */ +static void update_cs_ranges(void) +{ + u32 ctrl_ph; + void *ctrl_node, *bus_node, *parent_node; + u32 *ctrl_addr; + unsigned long ctrl_size; + u32 naddr, nsize; + int len; + int i; + + bus_node = finddevice("/chipselect"); + if (!bus_node || !dt_is_compatible(bus_node, "fsl,pq2-chipselect")) + return; + + dt_get_reg_format(bus_node, &naddr, &nsize); + if (naddr != 2 || nsize != 1) + goto err; + + parent_node = get_parent(bus_node); + if (!parent_node) + goto err; + + dt_get_reg_format(parent_node, &naddr, &nsize); + if (naddr != 1 || nsize != 1) + goto err; + + len = getprop(bus_node, "fsl,ctrl", &ctrl_ph, 4); + if (len != 4) + goto err; + + ctrl_node = find_node_by_prop_value(NULL, "linux,phandle", + (char *)&ctrl_ph, 4); + if (!ctrl_node) + goto err; + + if (!dt_is_compatible(ctrl_node, "fsl,pq2-chipselect-ctrl")) + goto err; + + if (!dt_xlate_reg(ctrl_node, 0, (unsigned long *)&ctrl_addr, + &ctrl_size)) + goto err; + + len = getprop(bus_node, "ranges", cs_ranges_buf, sizeof(cs_ranges_buf)); + + for (i = 0; i < len / sizeof(struct cs_range); i++) { + u32 base, option; + int cs = cs_ranges_buf[i].csnum; + if (cs >= ctrl_size / 8) + goto err; + + if (cs_ranges_buf[i].base != 0) + goto err; + + base = in_be32(&ctrl_addr[cs * 2]); + + /* If CS is already valid, use the existing flags. + * Otherwise, guess a sane default. + */ + if (base & 1) { + base &= 0x7fff; + option = in_be32(&ctrl_addr[cs * 2 + 1]) & 0x7fff; + } else { + base = 0x1801; + option = 0x10; + } + + out_be32(&ctrl_addr[cs * 2], 0); + out_be32(&ctrl_addr[cs * 2 + 1], + option | ~(cs_ranges_buf[i].size - 1)); + out_be32(&ctrl_addr[cs * 2], base | cs_ranges_buf[i].addr); + } + + return; + +err: + printf("Bad /chipselect or fsl,pq2-chipselect-ctrl node\r\n"); +} + +/* Older u-boots don't set PCI up properly. Update the hardware to match + * the device tree. The prefetch mem region and non-prefetch mem region + * must be contiguous in the host bus. As required by the PCI binding, + * PCI #addr/#size must be 3/2. The parent bus must be 1/1. Only + * 32-bit PCI is supported. All three region types (prefetchable mem, + * non-prefetchable mem, and I/O) must be present. + */ +static void fixup_pci(void) +{ + struct pci_range *mem = NULL, *mmio = NULL, + *io = NULL, *mem_base = NULL; + u32 *pci_regs[3]; + u8 *soc_regs; + int i, len; + void *ctrl_node, *bus_node, *parent_node, *soc_node; + u32 naddr, nsize, bus_ph, mem_log2; + + ctrl_node = finddevice("/soc/pci"); + if (!ctrl_node || !dt_is_compatible(ctrl_node, "fsl,pq2-pci")) + return; + + soc_node = finddevice("/soc"); + if (!soc_node || !dt_is_compatible(soc_node, "fsl,pq2-soc")) + goto err; + + for (i = 0; i < 3; i++) + if (!dt_xlate_reg(ctrl_node, i, + (unsigned long *)&pci_regs[i], NULL)) + goto err; + + if (!dt_xlate_reg(soc_node, 0, (unsigned long *)&soc_regs, NULL)) + goto err; + + len = getprop(ctrl_node, "fsl,bus", &bus_ph, 4); + if (len != 4) + goto err; + + bus_node = find_node_by_prop_value(NULL, "linux,phandle", + (char *)&bus_ph, 4); + if (!bus_node) + goto err; + + dt_get_reg_format(bus_node, &naddr, &nsize); + if (naddr != 3 || nsize != 2) + goto err; + + parent_node = get_parent(bus_node); + if (!parent_node) + goto err; + + dt_get_reg_format(parent_node, &naddr, &nsize); + if (naddr != 1 || nsize != 1) + goto err; + + len = getprop(bus_node, "ranges", pci_ranges_buf, + sizeof(pci_ranges_buf)); + + for (i = 0; i < len / sizeof(struct pci_range); i++) { + u32 flags = pci_ranges_buf[i].flags & 0x43000000; + + if (flags == 0x42000000) + mem = &pci_ranges_buf[i]; + else if (flags == 0x02000000) + mmio = &pci_ranges_buf[i]; + else if (flags == 0x01000000) + io = &pci_ranges_buf[i]; + } + + if (!mem || !mmio || !io) + goto err; + + if (mem->phys_addr + mem->size[1] == mmio->phys_addr) + mem_base = mem; + else if (mmio->phys_addr + mmio->size[1] == mem->phys_addr) + mem_base = mmio; + else + goto err; + + out_be32(&pci_regs[1][0], mem_base->phys_addr | 1); + out_be32(&pci_regs[2][0], ~(mem->size[1] + mmio->size[1] - 1)); + + out_be32(&pci_regs[1][1], io->phys_addr | 1); + out_be32(&pci_regs[2][1], ~(io->size[1] - 1)); + + out_le32(&pci_regs[0][0], mem->pci_addr[1] >> 12); + out_le32(&pci_regs[0][2], mem->phys_addr >> 12); + out_le32(&pci_regs[0][4], (~(mem->size[1] - 1) >> 12) | 0xa0000000); + + out_le32(&pci_regs[0][6], mmio->pci_addr[1] >> 12); + out_le32(&pci_regs[0][8], mmio->phys_addr >> 12); + out_le32(&pci_regs[0][10], (~(mmio->size[1] - 1) >> 12) | 0x80000000); + + out_le32(&pci_regs[0][12], io->pci_addr[1] >> 12); + out_le32(&pci_regs[0][14], io->phys_addr >> 12); + out_le32(&pci_regs[0][16], (~(io->size[1] - 1) >> 12) | 0xc0000000); + + /* Inbound translation */ + out_le32(&pci_regs[0][58], 0); + out_le32(&pci_regs[0][60], 0); + + mem_log2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1); + out_le32(&pci_regs[0][62], 0xa0000000 | ~((1 << (mem_log2 - 12)) - 1)); + + /* If PCI is disabled, drive RST high to enable. */ + if (!(in_le32(&pci_regs[0][32]) & 1)) { + /* Tpvrh (Power valid to RST# high) 100 ms */ + udelay(100000); + + out_le32(&pci_regs[0][32], 1); + + /* Trhfa (RST# high to first cfg access) 2^25 clocks */ + udelay(1020000); + } + + /* Enable bus master and memory access */ + out_le32(&pci_regs[0][64], 0x80000004); + out_le32(&pci_regs[0][65], in_le32(&pci_regs[0][65]) | 6); + + /* Park the bus on PCI, and elevate PCI's arbitration priority, + * as required by section 9.6 of the user's manual. + */ + out_8(&soc_regs[0x10028], 3); + out_be32((u32 *)&soc_regs[0x1002c], 0x01236745); + + return; + +err: + printf("Bad PCI node\r\n"); +} + +static void pq2_platform_fixups(void) +{ + void *node; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); + + node = finddevice("/soc/cpm"); + if (node) { + setprop(node, "clock-frequency", &bd.bi_cpmfreq, 4); + setprop(node, "fsl,brg-frequency", &bd.bi_brgfreq, 4); + } + + update_cs_ranges(); + fixup_pci(); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + serial_console_init(); + platform_ops.fixups = pq2_platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot.c b/arch/powerpc/boot/cuboot.c index 65795468ad6..7768b2306b7 100644 --- a/arch/powerpc/boot/cuboot.c +++ b/arch/powerpc/boot/cuboot.c @@ -17,9 +17,6 @@ #include "ppcboot.h" -extern char _end[]; -extern char _dtb_start[], _dtb_end[]; - void cuboot_init(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, unsigned long end_of_ram) diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h index 14b44aa96fe..e158311c501 100644 --- a/arch/powerpc/boot/dcr.h +++ b/arch/powerpc/boot/dcr.h @@ -121,4 +121,17 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, SDRAM0_B2C #define DCRN_CPC0_MIRQ1 0x0ed #define DCRN_CPC0_JTAGID 0x0ef +#define DCRN_MAL0_CFG 0x180 +#define MAL_RESET 0x80000000 + +/* 440EP Clock/Power-on Reset regs */ +#define DCRN_CPR0_ADDR 0xc +#define DCRN_CPR0_DATA 0xd +#define CPR0_PLLD0 0x60 +#define CPR0_OPBD0 0xc0 +#define CPR0_PERD0 0xe0 +#define CPR0_PRIMBD0 0xa0 +#define CPR0_SCPID 0x120 +#define CPR0_PLLC0 0x40 + #endif /* _PPC_BOOT_DCR_H_ */ diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c index c9951550ed2..e1b8122b439 100644 --- a/arch/powerpc/boot/devtree.c +++ b/arch/powerpc/boot/devtree.c @@ -74,6 +74,8 @@ void dt_fixup_cpu_clocks(u32 cpu, u32 tb, u32 bus) if (bus > 0) setprop_val(devp, "bus-frequency", bus); } + + timebase_period_ns = 1000000000 / tb; } void dt_fixup_clock(const char *path, u32 freq) @@ -111,9 +113,8 @@ void __dt_fixup_mac_addresses(u32 startindex, ...) } #define MAX_ADDR_CELLS 4 -#define MAX_RANGES 8 -static void get_reg_format(void *node, u32 *naddr, u32 *nsize) +void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize) { if (getprop(node, "#address-cells", naddr, 4) != 4) *naddr = 2; @@ -207,7 +208,7 @@ static int find_range(u32 *reg, u32 *ranges, int nregaddr, * In particular, PCI is not supported. Also, only the beginning of the * reg block is tracked; size is ignored except in ranges. */ -static u32 dt_xlate_buf[MAX_ADDR_CELLS * MAX_RANGES * 3]; +static u32 prop_buf[MAX_PROP_LEN / 4]; static int dt_xlate(void *node, int res, int reglen, unsigned long *addr, unsigned long *size) @@ -216,14 +217,14 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr, u32 this_addr[MAX_ADDR_CELLS]; void *parent; u64 ret_addr, ret_size; - u32 naddr, nsize, prev_naddr; + u32 naddr, nsize, prev_naddr, prev_nsize; int buflen, offset; parent = get_parent(node); if (!parent) return 0; - get_reg_format(parent, &naddr, &nsize); + dt_get_reg_format(parent, &naddr, &nsize); if (nsize > 2) return 0; @@ -231,41 +232,47 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr, offset = (naddr + nsize) * res; if (reglen < offset + naddr + nsize || - sizeof(dt_xlate_buf) < offset + naddr + nsize) + MAX_PROP_LEN < (offset + naddr + nsize) * 4) return 0; - copy_val(last_addr, dt_xlate_buf + offset, naddr); + copy_val(last_addr, prop_buf + offset, naddr); - ret_size = dt_xlate_buf[offset + naddr]; + ret_size = prop_buf[offset + naddr]; if (nsize == 2) { ret_size <<= 32; - ret_size |= dt_xlate_buf[offset + naddr + 1]; + ret_size |= prop_buf[offset + naddr + 1]; } - while ((node = get_parent(node))) { + for (;;) { prev_naddr = naddr; + prev_nsize = nsize; + node = parent; + + parent = get_parent(node); + if (!parent) + break; - get_reg_format(node, &naddr, &nsize); + dt_get_reg_format(parent, &naddr, &nsize); - buflen = getprop(node, "ranges", dt_xlate_buf, - sizeof(dt_xlate_buf)); - if (buflen < 0) + buflen = getprop(node, "ranges", prop_buf, + sizeof(prop_buf)); + if (buflen == 0) continue; - if (buflen > sizeof(dt_xlate_buf)) + if (buflen < 0 || buflen > sizeof(prop_buf)) return 0; - offset = find_range(last_addr, dt_xlate_buf, prev_naddr, - naddr, nsize, buflen / 4); + offset = find_range(last_addr, prop_buf, prev_naddr, + naddr, prev_nsize, buflen / 4); if (offset < 0) return 0; - copy_val(this_addr, dt_xlate_buf + offset, prev_naddr); + copy_val(this_addr, prop_buf + offset, prev_naddr); if (!sub_reg(last_addr, this_addr)) return 0; - copy_val(this_addr, dt_xlate_buf + offset + prev_naddr, naddr); + copy_val(this_addr, prop_buf + offset + prev_naddr, naddr); if (!add_reg(last_addr, this_addr, naddr)) return 0; @@ -292,16 +299,35 @@ int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size) { int reglen; - reglen = getprop(node, "reg", dt_xlate_buf, sizeof(dt_xlate_buf)) / 4; + reglen = getprop(node, "reg", prop_buf, sizeof(prop_buf)) / 4; return dt_xlate(node, res, reglen, addr, size); } int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr) { - if (buflen > sizeof(dt_xlate_buf)) + if (buflen > sizeof(prop_buf)) return 0; - memcpy(dt_xlate_buf, buf, buflen); + memcpy(prop_buf, buf, buflen); return dt_xlate(node, 0, buflen / 4, xlated_addr, NULL); } + +int dt_is_compatible(void *node, const char *compat) +{ + char *buf = (char *)prop_buf; + int len, pos; + + len = getprop(node, "compatible", buf, MAX_PROP_LEN); + if (len < 0) + return 0; + + for (pos = 0; pos < len; pos++) { + if (!strcmp(buf + pos, compat)) + return 1; + + pos += strnlen(&buf[pos], len - pos); + } + + return 0; +} diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts new file mode 100644 index 00000000000..bdd56b0e946 --- /dev/null +++ b/arch/powerpc/boot/dts/bamboo.dts @@ -0,0 +1,244 @@ +/* + * Device Tree Source for AMCC Bamboo + * + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,bamboo"; + compatible = "amcc,bamboo"; + dcr-parent = <&/cpus/PowerPC,440EP@0>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,440EP@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440ep"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440ep"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + DMA0: dma { + compatible = "ibm,dma-440ep", "ibm,dma-440gp"; + dcr-reg = <100 027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <180 62>; + num-tx-chans = <4>; + num-rx-chans = <4>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 3 4>; + }; + + POB0: opb { + compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Bamboo is oddball in the 44x world and doesn't use the ERPN + * bits. + */ + ranges = <00000000 0 00000000 80000000 + 80000000 0 80000000 80000000>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + ranges; + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <4 4>; + }; + + IIC0: i2c@ef600700 { + device_type = "i2c"; + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + device_type = "i2c"; + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + device_type = "zmii-interface"; + compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1c 4 1d 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1e 4 1f 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <2 3>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index c5f99613fc7..27a1463b6ab 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -175,6 +175,7 @@ fpga@7,0 { compatible = "Ebony-FPGA"; reg = <7 0 10>; + virtual-reg = <e8300000>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 1934b800278..4d09dcad253 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -10,207 +10,209 @@ */ / { - model = "MPC8272ADS"; - compatible = "MPC8260ADS"; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8272@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - 32-bit; - }; - }; - - pci_pic: interrupt-controller@f8200000 { - #address-cells = <0>; - #interrupt-cells = <2>; - interrupt-controller; - reg = <f8200000 f8200004>; - built-in; - device_type = "pci-pic"; - }; - memory { - device_type = "memory"; - reg = <00000000 4000000 f4500000 00000020>; - }; - - chosen { - name = "chosen"; - linux,platform = <0>; + model = "MPC8272ADS"; + compatible = "MPC8260ADS"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8272@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + }; + }; + + pci_pic: interrupt-controller@f8200000 { + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + reg = <f8200000 f8200004>; + built-in; + device_type = "pci-pic"; + }; + + memory { + device_type = "memory"; + reg = <00000000 4000000 f4500000 00000020>; + }; + + chosen { + name = "chosen"; + linux,platform = <0>; interrupt-controller = <&Cpm_pic>; - }; - - soc8272@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - ranges = <00000000 f0000000 00053000>; - reg = <f0000000 10000>; - - mdio@0 { - device_type = "mdio"; - compatible = "fs_enet"; - reg = <0 0>; - #address-cells = <1>; - #size-cells = <0>; + }; + + soc8272@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <00000000 f0000000 00053000>; + reg = <f0000000 10000>; + + mdio@0 { + device_type = "mdio"; + compatible = "fs_enet"; + reg = <0 0>; + #address-cells = <1>; + #size-cells = <0>; + phy0:ethernet-phy@0 { interrupt-parent = <&Cpm_pic>; - interrupts = <17 4>; - reg = <0>; - bitbang = [ 12 12 13 02 02 01 ]; - device_type = "ethernet-phy"; - }; + interrupts = <17 4>; + reg = <0>; + bitbang = [ 12 12 13 02 02 01 ]; + device_type = "ethernet-phy"; + }; + phy1:ethernet-phy@1 { interrupt-parent = <&Cpm_pic>; - interrupts = <17 4>; - bitbang = [ 12 12 13 02 02 01 ]; - reg = <3>; - device_type = "ethernet-phy"; - }; - }; - - ethernet@24000 { - #address-cells = <1>; - #size-cells = <0>; - device_type = "network"; - device-id = <1>; - compatible = "fs_enet"; - model = "FCC"; - reg = <11300 20 8400 100 11380 30>; - mac-address = [ 00 11 2F 99 43 54 ]; - interrupts = <20 2>; + interrupts = <17 4>; + bitbang = [ 12 12 13 02 02 01 ]; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + device-id = <1>; + compatible = "fs_enet"; + model = "FCC"; + reg = <11300 20 8400 100 11380 30>; + mac-address = [ 00 11 2F 99 43 54 ]; + interrupts = <20 2>; interrupt-parent = <&Cpm_pic>; phy-handle = <&Phy0>; - rx-clock = <13>; - tx-clock = <12>; - }; - - ethernet@25000 { - device_type = "network"; - device-id = <2>; - compatible = "fs_enet"; - model = "FCC"; - reg = <11320 20 8500 100 113b0 30>; - mac-address = [ 00 11 2F 99 44 54 ]; - interrupts = <21 2>; + rx-clock = <13>; + tx-clock = <12>; + }; + + ethernet@25000 { + device_type = "network"; + device-id = <2>; + compatible = "fs_enet"; + model = "FCC"; + reg = <11320 20 8500 100 113b0 30>; + mac-address = [ 00 11 2F 99 44 54 ]; + interrupts = <21 2>; interrupt-parent = <&Cpm_pic>; phy-handle = <&Phy1>; - rx-clock = <17>; - tx-clock = <18>; - }; - - cpm@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "cpm"; - model = "CPM2"; - ranges = <00000000 00000000 20000>; - reg = <0 20000>; - command-proc = <119c0>; - brg-frequency = <17D7840>; - cpm_clk = <BEBC200>; - - scc@11a00 { - device_type = "serial"; - compatible = "cpm_uart"; - model = "SCC"; - device-id = <1>; - reg = <11a00 20 8000 100>; - current-speed = <1c200>; - interrupts = <28 2>; + rx-clock = <17>; + tx-clock = <18>; + }; + + cpm@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "cpm"; + model = "CPM2"; + ranges = <00000000 00000000 20000>; + reg = <0 20000>; + command-proc = <119c0>; + brg-frequency = <17D7840>; + cpm_clk = <BEBC200>; + + scc@11a00 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SCC"; + device-id = <1>; + reg = <11a00 20 8000 100>; + current-speed = <1c200>; + interrupts = <28 2>; interrupt-parent = <&Cpm_pic>; - clock-setup = <0 00ffffff>; - rx-clock = <1>; - tx-clock = <1>; - }; - - scc@11a60 { - device_type = "serial"; - compatible = "cpm_uart"; - model = "SCC"; - device-id = <4>; - reg = <11a60 20 8300 100>; - current-speed = <1c200>; - interrupts = <2b 2>; + clock-setup = <0 00ffffff>; + rx-clock = <1>; + tx-clock = <1>; + }; + + scc@11a60 { + device_type = "serial"; + compatible = "cpm_uart"; + model = "SCC"; + device-id = <4>; + reg = <11a60 20 8300 100>; + current-speed = <1c200>; + interrupts = <2b 2>; interrupt-parent = <&Cpm_pic>; - clock-setup = <1b ffffff00>; - rx-clock = <4>; - tx-clock = <4>; - }; - - }; - cpm_pic:interrupt-controller@10c00 { - #address-cells = <0>; - #interrupt-cells = <2>; - interrupt-controller; - reg = <10c00 80>; - built-in; - device_type = "cpm-pic"; - compatible = "CPM2"; - }; - pci@0500 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "8272"; - device_type = "pci"; - reg = <10430 4dc>; - clock-frequency = <3f940aa>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x16 */ - b000 0 0 1 f8200000 40 8 - b000 0 0 2 f8200000 41 8 - b000 0 0 3 f8200000 42 8 - b000 0 0 4 f8200000 43 8 - - /* IDSEL 0x17 */ - b800 0 0 1 f8200000 43 8 - b800 0 0 2 f8200000 40 8 - b800 0 0 3 f8200000 41 8 - b800 0 0 4 f8200000 42 8 - - /* IDSEL 0x18 */ - c000 0 0 1 f8200000 42 8 - c000 0 0 2 f8200000 43 8 - c000 0 0 3 f8200000 40 8 - c000 0 0 4 f8200000 41 8>; + clock-setup = <1b ffffff00>; + rx-clock = <4>; + tx-clock = <4>; + }; + }; + + cpm_pic:interrupt-controller@10c00 { + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + reg = <10c00 80>; + built-in; + device_type = "cpm-pic"; + compatible = "CPM2"; + }; + + pci@0500 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "8272"; + device_type = "pci"; + reg = <10430 4dc>; + clock-frequency = <3f940aa>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x16 */ + b000 0 0 1 f8200000 40 8 + b000 0 0 2 f8200000 41 8 + b000 0 0 3 f8200000 42 8 + b000 0 0 4 f8200000 43 8 + + /* IDSEL 0x17 */ + b800 0 0 1 f8200000 43 8 + b800 0 0 2 f8200000 40 8 + b800 0 0 3 f8200000 41 8 + b800 0 0 4 f8200000 42 8 + + /* IDSEL 0x18 */ + c000 0 0 1 f8200000 42 8 + c000 0 0 2 f8200000 43 8 + c000 0 0 3 f8200000 40 8 + c000 0 0 4 f8200000 41 8>; interrupt-parent = <&Cpm_pic>; - interrupts = <14 8>; - bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 40000000 - 01000000 0 00000000 f6000000 0 02000000>; - }; + interrupts = <14 8>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 40000000 + 01000000 0 00000000 f6000000 0 02000000>; + }; /* May need to remove if on a part without crypto engine */ - crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; - reg = <30000 10000>; - interrupts = <b 2>; + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 10000>; + interrupts = <b 2>; interrupt-parent = <&Cpm_pic>; - num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ - descriptor-types-mask = <01010ebf>; - }; - - }; + descriptor-types-mask = <01010ebf>; + }; + }; }; diff --git a/arch/powerpc/boot/ebony.c b/arch/powerpc/boot/ebony.c index 75daedafd0a..86c0f5df0a8 100644 --- a/arch/powerpc/boot/ebony.c +++ b/arch/powerpc/boot/ebony.c @@ -24,12 +24,11 @@ #include "page.h" #include "ops.h" #include "reg.h" +#include "io.h" #include "dcr.h" +#include "4xx.h" #include "44x.h" -extern char _dtb_start[]; -extern char _dtb_end[]; - static u8 *ebony_mac0, *ebony_mac1; /* Calculate 440GP clocks */ @@ -92,15 +91,53 @@ void ibm440gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk) dt_fixup_clock("/plb/opb/serial@40000300", uart1); } +#define EBONY_FPGA_PATH "/plb/opb/ebc/fpga" +#define EBONY_FPGA_FLASH_SEL 0x01 +#define EBONY_SMALL_FLASH_PATH "/plb/opb/ebc/small-flash" + +static void ebony_flashsel_fixup(void) +{ + void *devp; + u32 reg[3] = {0x0, 0x0, 0x80000}; + u8 *fpga; + u8 fpga_reg0 = 0x0; + + devp = finddevice(EBONY_FPGA_PATH); + if (!devp) + fatal("Couldn't locate FPGA node %s\n\r", EBONY_FPGA_PATH); + + if (getprop(devp, "virtual-reg", &fpga, sizeof(fpga)) != sizeof(fpga)) + fatal("%s has missing or invalid virtual-reg property\n\r", + EBONY_FPGA_PATH); + + fpga_reg0 = in_8(fpga); + + devp = finddevice(EBONY_SMALL_FLASH_PATH); + if (!devp) + fatal("Couldn't locate small flash node %s\n\r", + EBONY_SMALL_FLASH_PATH); + + if (getprop(devp, "reg", reg, sizeof(reg)) != sizeof(reg)) + fatal("%s has reg property of unexpected size\n\r", + EBONY_SMALL_FLASH_PATH); + + /* Invert address bit 14 (IBM-endian) if FLASH_SEL fpga bit is set */ + if (fpga_reg0 & EBONY_FPGA_FLASH_SEL) + reg[1] ^= 0x80000; + + setprop(devp, "reg", reg, sizeof(reg)); +} + static void ebony_fixups(void) { // FIXME: sysclk should be derived by reading the FPGA registers unsigned long sysclk = 33000000; ibm440gp_fixup_clocks(sysclk, 6 * 1843200); - ibm44x_fixup_memsize(); + ibm4xx_fixup_memsize(); dt_fixup_mac_addresses(ebony_mac0, ebony_mac1); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); + ebony_flashsel_fixup(); } void ebony_init(void *mac0, void *mac1) diff --git a/arch/powerpc/boot/holly.c b/arch/powerpc/boot/holly.c index 7d6539f5e22..199e783aea4 100644 --- a/arch/powerpc/boot/holly.c +++ b/arch/powerpc/boot/holly.c @@ -21,11 +21,6 @@ #include "ops.h" #include "io.h" -extern char _start[]; -extern char _end[]; -extern char _dtb_start[]; -extern char _dtb_end[]; - BSS_STACK(4096); void platform_init(unsigned long r3, unsigned long r4, unsigned long r5) diff --git a/arch/powerpc/boot/io.h b/arch/powerpc/boot/io.h index 32974ed49e0..ccaedaec50d 100644 --- a/arch/powerpc/boot/io.h +++ b/arch/powerpc/boot/io.h @@ -1,5 +1,8 @@ #ifndef _IO_H #define __IO_H + +#include "types.h" + /* * Low-level I/O routines. * @@ -20,6 +23,37 @@ static inline void out_8(volatile unsigned char *addr, int val) : "=m" (*addr) : "r" (val)); } +static inline unsigned in_le16(const volatile u16 *addr) +{ + unsigned ret; + + __asm__ __volatile__("lhbrx %0,0,%1; twi 0,%0,0; isync" + : "=r" (ret) : "r" (addr), "m" (*addr)); + + return ret; +} + +static inline unsigned in_be16(const volatile u16 *addr) +{ + unsigned ret; + + __asm__ __volatile__("lhz%U1%X1 %0,%1; twi 0,%0,0; isync" + : "=r" (ret) : "m" (*addr)); + return ret; +} + +static inline void out_le16(volatile u16 *addr, int val) +{ + __asm__ __volatile__("sthbrx %1,0,%2; sync" : "=m" (*addr) + : "r" (val), "r" (addr)); +} + +static inline void out_be16(volatile u16 *addr, int val) +{ + __asm__ __volatile__("sth%U0%X0 %1,%0; sync" + : "=m" (*addr) : "r" (val)); +} + static inline unsigned in_le32(const volatile unsigned *addr) { unsigned ret; @@ -50,4 +84,19 @@ static inline void out_be32(volatile unsigned *addr, int val) : "=m" (*addr) : "r" (val)); } +static inline void sync(void) +{ + asm volatile("sync" : : : "memory"); +} + +static inline void eieio(void) +{ + asm volatile("eieio" : : : "memory"); +} + +static inline void barrier(void) +{ + asm volatile("" : : : "memory"); +} + #endif /* _IO_H */ diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c index 416dc3857bf..1b496b37eca 100644 --- a/arch/powerpc/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -19,16 +19,6 @@ #include "flatdevtree.h" #include "reg.h" -extern char _start[]; -extern char __bss_start[]; -extern char _end[]; -extern char _vmlinux_start[]; -extern char _vmlinux_end[]; -extern char _initrd_start[]; -extern char _initrd_end[]; -extern char _dtb_start[]; -extern char _dtb_end[]; - static struct gunzip_state gzstate; struct addr_range { diff --git a/arch/powerpc/boot/mpsc.c b/arch/powerpc/boot/mpsc.c index f1c0e965e5c..802ea53790d 100644 --- a/arch/powerpc/boot/mpsc.c +++ b/arch/powerpc/boot/mpsc.c @@ -17,7 +17,6 @@ #include "io.h" #include "ops.h" -extern void udelay(long delay); #define MPSC_CHR_1 0x000c diff --git a/arch/powerpc/boot/mv64x60_i2c.c b/arch/powerpc/boot/mv64x60_i2c.c index 435fe852868..d085377be3b 100644 --- a/arch/powerpc/boot/mv64x60_i2c.c +++ b/arch/powerpc/boot/mv64x60_i2c.c @@ -21,8 +21,6 @@ #include "ops.h" #include "mv64x60.h" -extern void udelay(long); - /* Register defines */ #define MV64x60_I2C_REG_SLAVE_ADDR 0x00 #define MV64x60_I2C_REG_DATA 0x04 diff --git a/arch/powerpc/boot/of.c b/arch/powerpc/boot/of.c index 385e08b83b7..61d9899aa0d 100644 --- a/arch/powerpc/boot/of.c +++ b/arch/powerpc/boot/of.c @@ -17,8 +17,6 @@ #include "of.h" -extern char _end[]; - /* Value picked to match that used by yaboot */ #define PROG_START 0x01400000 /* only used on 64-bit systems */ #define RAM_END (512<<20) /* Fixme: use OF */ diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h index 86077066cd7..45c2268d5c5 100644 --- a/arch/powerpc/boot/ops.h +++ b/arch/powerpc/boot/ops.h @@ -82,11 +82,14 @@ int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device); int serial_console_init(void); int ns16550_console_init(void *devp, struct serial_console_data *scdp); int mpsc_console_init(void *devp, struct serial_console_data *scdp); +int cpm_console_init(void *devp, struct serial_console_data *scdp); void *simple_alloc_init(char *base, unsigned long heap_size, unsigned long granularity, unsigned long max_allocs); extern void flush_cache(void *, unsigned long); int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size); int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr); +int dt_is_compatible(void *node, const char *compat); +void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize); static inline void *finddevice(const char *name) { @@ -191,4 +194,25 @@ static inline void exit(void) static char _bss_stack[size]; \ void *_platform_stack_top = _bss_stack + sizeof(_bss_stack); +extern unsigned long timebase_period_ns; +void udelay(long delay); + +extern char _start[]; +extern char __bss_start[]; +extern char _end[]; +extern char _vmlinux_start[]; +extern char _vmlinux_end[]; +extern char _initrd_start[]; +extern char _initrd_end[]; +extern char _dtb_start[]; +extern char _dtb_end[]; + +static inline __attribute__((const)) +int __ilog2_u32(u32 n) +{ + int bit; + asm ("cntlzw %0,%1" : "=r" (bit) : "r" (n)); + return 31 - bit; +} + #endif /* _PPC_BOOT_OPS_H_ */ diff --git a/arch/powerpc/boot/ppcboot.h b/arch/powerpc/boot/ppcboot.h index 5290ff2c2b2..6ae6f906395 100644 --- a/arch/powerpc/boot/ppcboot.h +++ b/arch/powerpc/boot/ppcboot.h @@ -78,17 +78,18 @@ typedef struct bd_info { hymod_conf_t bi_hymod_conf; /* hymod configuration information */ #endif #if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \ - defined(TARGET_85xx) || defined(TARGET_83xx) + defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1) /* second onboard ethernet port */ unsigned char bi_enet1addr[6]; #define HAVE_ENET1ADDR #endif -#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || defined(TARGET_85xx) +#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \ + defined(TARGET_85xx) || defined(TARGET_HAS_ETH2) /* third onboard ethernet ports */ unsigned char bi_enet2addr[6]; #define HAVE_ENET2ADDR #endif -#if defined(TARGET_440GX) +#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3) /* fourth onboard ethernet ports */ unsigned char bi_enet3addr[6]; #define HAVE_ENET3ADDR diff --git a/arch/powerpc/boot/prpmc2800.c b/arch/powerpc/boot/prpmc2800.c index f428bac10d4..9614e1db9da 100644 --- a/arch/powerpc/boot/prpmc2800.c +++ b/arch/powerpc/boot/prpmc2800.c @@ -21,12 +21,6 @@ #include "gunzip_util.h" #include "mv64x60.h" -extern char _end[]; -extern char _vmlinux_start[], _vmlinux_end[]; -extern char _dtb_start[], _dtb_end[]; - -extern void udelay(long delay); - #define KB 1024U #define MB (KB*KB) #define GB (KB*MB) diff --git a/arch/powerpc/boot/ps3.c b/arch/powerpc/boot/ps3.c index 893d59339c2..d6661151b49 100644 --- a/arch/powerpc/boot/ps3.c +++ b/arch/powerpc/boot/ps3.c @@ -120,10 +120,6 @@ void ps3_copy_vectors(void) void platform_init(void) { - extern char _end[]; - extern char _dtb_start[]; - extern char _initrd_start[]; - extern char _initrd_end[]; const u32 heapsize = 0x1000000 - (u32)_end; /* 16MiB */ void *chosen; unsigned long ft_addr; diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c index eaa0d3ae351..d47f8e0b4b8 100644 --- a/arch/powerpc/boot/serial.c +++ b/arch/powerpc/boot/serial.c @@ -19,8 +19,6 @@ #include "io.h" #include "ops.h" -extern void udelay(long delay); - static int serial_open(void) { struct serial_console_data *scdp = console_ops.data; @@ -114,29 +112,32 @@ int serial_console_init(void) { void *devp; int rc = -1; - char compat[MAX_PROP_LEN]; devp = serial_get_stdout_devp(); if (devp == NULL) goto err_out; - if (getprop(devp, "compatible", compat, sizeof(compat)) < 0) - goto err_out; - - if (!strcmp(compat, "ns16550")) + if (dt_is_compatible(devp, "ns16550")) rc = ns16550_console_init(devp, &serial_cd); - else if (!strcmp(compat, "marvell,mpsc")) + else if (dt_is_compatible(devp, "marvell,mpsc")) rc = mpsc_console_init(devp, &serial_cd); + else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") || + dt_is_compatible(devp, "fsl,cpm1-smc-uart") || + dt_is_compatible(devp, "fsl,cpm2-scc-uart") || + dt_is_compatible(devp, "fsl,cpm2-smc-uart")) + rc = cpm_console_init(devp, &serial_cd); /* Add other serial console driver calls here */ if (!rc) { console_ops.open = serial_open; console_ops.write = serial_write; - console_ops.edit_cmdline = serial_edit_cmdline; console_ops.close = serial_close; console_ops.data = &serial_cd; + if (serial_cd.getc) + console_ops.edit_cmdline = serial_edit_cmdline; + return 0; } err_out: diff --git a/arch/powerpc/boot/treeboot-bamboo.c b/arch/powerpc/boot/treeboot-bamboo.c new file mode 100644 index 00000000000..1f1fe5aaac1 --- /dev/null +++ b/arch/powerpc/boot/treeboot-bamboo.c @@ -0,0 +1,27 @@ +/* + * Copyright IBM Corporation, 2007 + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Based on ebony wrapper: + * Copyright 2007 David Gibson, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 of the License + */ +#include "ops.h" +#include "stdio.h" +#include "44x.h" + +extern char _end[]; + +BSS_STACK(4096); + +void platform_init(void) +{ + unsigned long end_of_ram = 0x8000000; + unsigned long avail_ram = end_of_ram - (unsigned long)_end; + + simple_alloc_init(_end, avail_ram, 32, 64); + bamboo_init(); +} diff --git a/arch/powerpc/boot/treeboot-ebony.c b/arch/powerpc/boot/treeboot-ebony.c index 8436a9c5519..21cc4834a38 100644 --- a/arch/powerpc/boot/treeboot-ebony.c +++ b/arch/powerpc/boot/treeboot-ebony.c @@ -16,8 +16,6 @@ #include "stdio.h" #include "44x.h" -extern char _end[]; - BSS_STACK(4096); #define OPENBIOS_MAC_BASE 0xfffffe0c diff --git a/arch/powerpc/configs/bamboo_defconfig b/arch/powerpc/configs/bamboo_defconfig new file mode 100644 index 00000000000..b592dec4640 --- /dev/null +++ b/arch/powerpc/configs/bamboo_defconfig @@ -0,0 +1,775 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc1 +# Fri Aug 3 10:46:53 2007 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +CONFIG_4xx=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_BAMBOO=y +# CONFIG_EBONY is not set +CONFIG_440EP=y +CONFIG_IBM440EP_ERR42=y +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_CPM2 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +CONFIG_SECCOMP=y +CONFIG_WANT_DEVICE_TREE=y +CONFIG_DEVICE_TREE="bamboo.dts" +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x01000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_MACINTOSH_DRIVERS=y +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ARCNET is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set +# CONFIG_UCC_SLOW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_DEBUGGER=y +# CONFIG_KGDB is not set +# CONFIG_XMON is not set +# CONFIG_BDI_SWITCH is not set +CONFIG_PPC_EARLY_DEBUG=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set +# CONFIG_PPC_EARLY_DEBUG_BEAT is not set +CONFIG_PPC_EARLY_DEBUG_44x=y +CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300 +CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x0 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_HW=y diff --git a/arch/powerpc/configs/ebony_defconfig b/arch/powerpc/configs/ebony_defconfig index 5762cddfc14..d8dc7e63aab 100644 --- a/arch/powerpc/configs/ebony_defconfig +++ b/arch/powerpc/configs/ebony_defconfig @@ -1,9 +1,25 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc6 -# Tue Jun 26 12:38:33 2007 +# Linux kernel version: 2.6.23-rc1-powerpc-ebony-mtd +# Mon Jul 30 15:47:59 2007 # # CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_E200 is not set +CONFIG_4xx=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_PPC_MERGE=y CONFIG_MMU=y @@ -14,39 +30,22 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y +CONFIG_OF=y # CONFIG_PPC_UDBG_16550 is not set # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set - -# -# Processor support -# -# CONFIG_CLASSIC32 is not set -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_85xx is not set -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -CONFIG_44x=y -# CONFIG_E200 is not set CONFIG_PPC_DCR_NATIVE=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_PPC_DCR=y -CONFIG_4xx=y -CONFIG_BOOKE=y -CONFIG_PTE_64BIT=y -CONFIG_PHYS_64BIT=y -# CONFIG_PPC_MM_SLICES is not set -CONFIG_NOT_COHERENT_CACHE=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -63,12 +62,11 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 @@ -102,24 +100,17 @@ CONFIG_SLAB=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -184,6 +175,8 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set CONFIG_SECCOMP=y @@ -196,9 +189,9 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y -# CONFIG_PPC_INDIRECT_PCI_BE is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set @@ -306,6 +299,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -320,27 +314,85 @@ CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set # -# Connector - unified userspace <-> kernelspace linker +# User Modules And Translation Layers # -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -# CONFIG_MTD is not set +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # -# Parallel port support +# RAM/ROM/Flash chip drivers # -# CONFIG_PARPORT is not set +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set # -# Plug and Play support +# Disk-On-Chip Device Drivers # -# CONFIG_PNPACPI is not set +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set # -# Block devices +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set @@ -356,14 +408,12 @@ CONFIG_BLK_DEV_RAM_SIZE=35000 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +# CONFIG_XILINX_SYSACE is not set +CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set # CONFIG_IDE is not set # @@ -371,12 +421,9 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set # @@ -389,35 +436,17 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# # CONFIG_NET_ETHERNET is not set -CONFIG_IBM_EMAC=y -CONFIG_IBM_EMAC_RXB=128 -CONFIG_IBM_EMAC_TXB=64 -CONFIG_IBM_EMAC_POLL_WEIGHT=32 -CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256 -CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0 -# CONFIG_IBM_EMAC_DEBUG is not set -CONFIG_IBM_EMAC_ZMII=y CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -429,7 +458,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -459,15 +487,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -512,10 +532,6 @@ CONFIG_SERIAL_OF_PLATFORM=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set @@ -526,10 +542,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set @@ -539,11 +551,8 @@ CONFIG_DEVPORT=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # @@ -568,6 +577,7 @@ CONFIG_DEVPORT=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set @@ -575,10 +585,7 @@ CONFIG_DEVPORT=y # Sound # # CONFIG_SOUND is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y @@ -593,28 +600,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# +# CONFIG_EDAC is not set # # Real Time Clock @@ -635,6 +623,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # +# Userspace I/O +# +# CONFIG_UIO is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -694,6 +687,15 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -723,7 +725,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -750,8 +751,10 @@ CONFIG_BITREVERSE=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y @@ -774,6 +777,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set @@ -796,7 +800,6 @@ CONFIG_FORCED_INLINING=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_BDI_SWITCH is not set -# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -804,10 +807,6 @@ CONFIG_FORCED_INLINING=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y @@ -845,7 +844,4 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_HW=y diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index b0cb2e662c2..967afc517d8 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -46,7 +46,7 @@ ifeq ($(CONFIG_PPC_MERGE),y) extra-$(CONFIG_PPC_STD_MMU) := head_32.o extra-$(CONFIG_PPC64) := head_64.o -extra-$(CONFIG_40x) := head_4xx.o +extra-$(CONFIG_40x) := head_40x.o extra-$(CONFIG_44x) := head_44x.o extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_8xx) := head_8xx.o @@ -80,13 +80,6 @@ ifneq ($(CONFIG_PPC_INDIRECT_IO),y) obj-y += iomap.o endif -ifeq ($(CONFIG_PPC_ISERIES),y) -CFLAGS_lparmap.s += -g0 -extra-y += lparmap.s -$(obj)/head_64.o: $(obj)/lparmap.s -AFLAGS_head_64.o += -I$(obj) -endif - else # stuff used from here for ARCH=ppc smpobj-$(CONFIG_SMP) += smp.o diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index 5c9ff7f5c44..4c47f9cc0d9 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -38,7 +38,7 @@ struct aligninfo { /* Bits in the flags field */ #define LD 0 /* load */ #define ST 1 /* store */ -#define SE 2 /* sign-extend value */ +#define SE 2 /* sign-extend value, or FP ld/st as word */ #define F 4 /* to/from fp regs */ #define U 8 /* update index register */ #define M 0x10 /* multiple load/store */ @@ -87,9 +87,9 @@ static struct aligninfo aligninfo[128] = { { 8, LD+F+U }, /* 00 1 1001: lfdu */ { 4, ST+F+S+U }, /* 00 1 1010: stfsu */ { 8, ST+F+U }, /* 00 1 1011: stfdu */ - INVALID, /* 00 1 1100 */ + { 16, LD+F }, /* 00 1 1100: lfdp */ INVALID, /* 00 1 1101 */ - INVALID, /* 00 1 1110 */ + { 16, ST+F }, /* 00 1 1110: stfdp */ INVALID, /* 00 1 1111 */ { 8, LD }, /* 01 0 0000: ldx */ INVALID, /* 01 0 0001 */ @@ -167,10 +167,10 @@ static struct aligninfo aligninfo[128] = { { 8, LD+F }, /* 11 0 1001: lfdx */ { 4, ST+F+S }, /* 11 0 1010: stfsx */ { 8, ST+F }, /* 11 0 1011: stfdx */ - INVALID, /* 11 0 1100 */ - { 8, LD+M }, /* 11 0 1101: lmd */ - INVALID, /* 11 0 1110 */ - { 8, ST+M }, /* 11 0 1111: stmd */ + { 16, LD+F }, /* 11 0 1100: lfdpx */ + { 4, LD+F+SE }, /* 11 0 1101: lfiwax */ + { 16, ST+F }, /* 11 0 1110: stfdpx */ + { 4, ST+F }, /* 11 0 1111: stfiwx */ { 4, LD+U }, /* 11 1 0000: lwzux */ INVALID, /* 11 1 0001 */ { 4, ST+U }, /* 11 1 0010: stwux */ @@ -356,6 +356,42 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, return 1; } +/* + * Emulate floating-point pair loads and stores. + * Only POWER6 has these instructions, and it does true little-endian, + * so we don't need the address swizzling. + */ +static int emulate_fp_pair(struct pt_regs *regs, unsigned char __user *addr, + unsigned int reg, unsigned int flags) +{ + char *ptr = (char *) ¤t->thread.fpr[reg]; + int i, ret; + + if (!(flags & F)) + return 0; + if (reg & 1) + return 0; /* invalid form: FRS/FRT must be even */ + if (!(flags & SW)) { + /* not byte-swapped - easy */ + if (!(flags & ST)) + ret = __copy_from_user(ptr, addr, 16); + else + ret = __copy_to_user(addr, ptr, 16); + } else { + /* each FPR value is byte-swapped separately */ + ret = 0; + for (i = 0; i < 16; ++i) { + if (!(flags & ST)) + ret |= __get_user(ptr[i^7], addr + i); + else + ret |= __put_user(ptr[i^7], addr + i); + } + } + if (ret) + return -EFAULT; + return 1; /* exception handled and fixed up */ +} + /* * Called on alignment exception. Attempts to fixup @@ -471,6 +507,10 @@ int fix_alignment(struct pt_regs *regs) flush_fp_to_thread(current); } + /* Special case for 16-byte FP loads and stores */ + if (nb == 16) + return emulate_fp_pair(regs, addr, reg, flags); + /* If we are loading, get the data from user space, else * get it from register values */ @@ -531,7 +571,8 @@ int fix_alignment(struct pt_regs *regs) * or floating point single precision conversion */ switch (flags & ~(U|SW)) { - case LD+SE: /* sign extend */ + case LD+SE: /* sign extending integer loads */ + case LD+F+SE: /* sign extend for lfiwax */ if ( nb == 2 ) data.ll = data.x16.low16; else /* nb must be 4 */ diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 2cb1d948779..a40805328f9 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -312,5 +312,13 @@ int main(void) #ifdef CONFIG_BUG DEFINE(BUG_ENTRY_SIZE, sizeof(struct bug_entry)); #endif + +#ifdef CONFIG_PPC_ISERIES + /* the assembler miscalculates the VSID values */ + DEFINE(PAGE_OFFSET_ESID, GET_ESID(PAGE_OFFSET)); + DEFINE(PAGE_OFFSET_VSID, KERNEL_VSID(PAGE_OFFSET)); + DEFINE(VMALLOC_START_ESID, GET_ESID(VMALLOC_START)); + DEFINE(VMALLOC_START_VSID, KERNEL_VSID(VMALLOC_START)); +#endif return 0; } diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index e7b684689e0..3ef51fb6f10 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -11,7 +11,6 @@ #include <asm/sections.h> #include <asm/prom.h> #include <asm/btext.h> -#include <asm/prom.h> #include <asm/page.h> #include <asm/mmu.h> #include <asm/pgtable.h> diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 37658ea417f..77c749a1337 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -24,7 +24,6 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/types.h> -#include <linux/irq.h> #include <asm/processor.h> #include <asm/machdep.h> diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 2f6f5a7bc69..ffa91d673ec 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -25,7 +25,7 @@ #define DBG(fmt...) #endif -void reserve_kdump_trampoline(void) +void __init reserve_kdump_trampoline(void) { lmb_reserve(0, KDUMP_RESERVE_LIMIT); } diff --git a/arch/powerpc/kernel/head_4xx.S b/arch/powerpc/kernel/head_40x.S index adc7f8097cd..a8e045773a9 100644 --- a/arch/powerpc/kernel/head_4xx.S +++ b/arch/powerpc/kernel/head_40x.S @@ -35,7 +35,6 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm/pgtable.h> -#include <asm/ibm4xx.h> #include <asm/cputable.h> #include <asm/thread_info.h> #include <asm/ppc_asm.h> @@ -772,7 +771,7 @@ finish_tlb_load: */ lwz r9, tlb_4xx_index@l(0) addi r9, r9, 1 - andi. r9, r9, (PPC4XX_TLB_SIZE-1) + andi. r9, r9, (PPC40X_TLB_SIZE-1) stw r9, tlb_4xx_index@l(0) 6: diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 171800002ed..33c4e8cab0b 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -34,6 +34,8 @@ #include <asm/iseries/lpar_map.h> #include <asm/thread_info.h> #include <asm/firmware.h> +#include <asm/page_64.h> +#include <asm/exception.h> #define DO_SOFT_DISABLE @@ -144,344 +146,9 @@ exception_marker: .text /* - * The following macros define the code that appears as - * the prologue to each of the exception handlers. They - * are split into two parts to allow a single kernel binary - * to be used for pSeries and iSeries. - * LOL. One day... - paulus - */ - -/* - * We make as much of the exception code common between native - * exception handlers (including pSeries LPAR) and iSeries LPAR - * implementations as possible. - */ - -/* * This is the start of the interrupt handlers for pSeries * This code runs with relocation off. */ -#define EX_R9 0 -#define EX_R10 8 -#define EX_R11 16 -#define EX_R12 24 -#define EX_R13 32 -#define EX_SRR0 40 -#define EX_DAR 48 -#define EX_DSISR 56 -#define EX_CCR 60 -#define EX_R3 64 -#define EX_LR 72 - -/* - * We're short on space and time in the exception prolog, so we can't - * use the normal SET_REG_IMMEDIATE macro. Normally we just need the - * low halfword of the address, but for Kdump we need the whole low - * word. - */ -#ifdef CONFIG_CRASH_DUMP -#define LOAD_HANDLER(reg, label) \ - oris reg,reg,(label)@h; /* virt addr of handler ... */ \ - ori reg,reg,(label)@l; /* .. and the rest */ -#else -#define LOAD_HANDLER(reg, label) \ - ori reg,reg,(label)@l; /* virt addr of handler ... */ -#endif - -/* - * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode. - * The firmware calls the registered system_reset_fwnmi and - * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run - * a 32bit application at the time of the event. - * This firmware bug is present on POWER4 and JS20. - */ -#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,area+EX_R9(r13); /* save r9 - r12 */ \ - std r10,area+EX_R10(r13); \ - std r11,area+EX_R11(r13); \ - std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ - std r9,area+EX_R13(r13); \ - mfcr r9; \ - clrrdi r12,r13,32; /* get high part of &label */ \ - mfmsr r10; \ - /* force 64bit mode */ \ - li r11,5; /* MSR_SF_LG|MSR_ISF_LG */ \ - rldimi r10,r11,61,0; /* insert into top 3 bits */ \ - /* done 64bit mode */ \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - LOAD_HANDLER(r12,label) \ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -#define EXCEPTION_PROLOG_PSERIES(area, label) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,area+EX_R9(r13); /* save r9 - r12 */ \ - std r10,area+EX_R10(r13); \ - std r11,area+EX_R11(r13); \ - std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ - std r9,area+EX_R13(r13); \ - mfcr r9; \ - clrrdi r12,r13,32; /* get high part of &label */ \ - mfmsr r10; \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - LOAD_HANDLER(r12,label) \ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -/* - * This is the start of the interrupt handlers for iSeries - * This code runs with relocation on. - */ -#define EXCEPTION_PROLOG_ISERIES_1(area) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,area+EX_R9(r13); /* save r9 - r12 */ \ - std r10,area+EX_R10(r13); \ - std r11,area+EX_R11(r13); \ - std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ - std r9,area+EX_R13(r13); \ - mfcr r9 - -#define EXCEPTION_PROLOG_ISERIES_2 \ - mfmsr r10; \ - ld r12,PACALPPACAPTR(r13); \ - ld r11,LPPACASRR0(r12); \ - ld r12,LPPACASRR1(r12); \ - ori r10,r10,MSR_RI; \ - mtmsrd r10,1 - -/* - * The common exception prolog is used for all except a few exceptions - * such as a segment miss on a kernel address. We have to be prepared - * to take another exception from the point where we first touch the - * kernel stack onwards. - * - * On entry r13 points to the paca, r9-r13 are saved in the paca, - * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and - * SRR1, and relocation is on. - */ -#define EXCEPTION_PROLOG_COMMON(n, area) \ - andi. r10,r12,MSR_PR; /* See if coming from user */ \ - mr r10,r1; /* Save r1 */ \ - subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \ - beq- 1f; \ - ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ -1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ - bge- cr1,2f; /* abort if it is */ \ - b 3f; \ -2: li r1,(n); /* will be reloaded later */ \ - sth r1,PACA_TRAP_SAVE(r13); \ - b bad_stack; \ -3: std r9,_CCR(r1); /* save CR in stackframe */ \ - std r11,_NIP(r1); /* save SRR0 in stackframe */ \ - std r12,_MSR(r1); /* save SRR1 in stackframe */ \ - std r10,0(r1); /* make stack chain pointer */ \ - std r0,GPR0(r1); /* save r0 in stackframe */ \ - std r10,GPR1(r1); /* save r1 in stackframe */ \ - ACCOUNT_CPU_USER_ENTRY(r9, r10); \ - std r2,GPR2(r1); /* save r2 in stackframe */ \ - SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ - SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ - ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ - ld r10,area+EX_R10(r13); \ - std r9,GPR9(r1); \ - std r10,GPR10(r1); \ - ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \ - ld r10,area+EX_R12(r13); \ - ld r11,area+EX_R13(r13); \ - std r9,GPR11(r1); \ - std r10,GPR12(r1); \ - std r11,GPR13(r1); \ - ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ - mflr r9; /* save LR in stackframe */ \ - std r9,_LINK(r1); \ - mfctr r10; /* save CTR in stackframe */ \ - std r10,_CTR(r1); \ - lbz r10,PACASOFTIRQEN(r13); \ - mfspr r11,SPRN_XER; /* save XER in stackframe */ \ - std r10,SOFTE(r1); \ - std r11,_XER(r1); \ - li r9,(n)+1; \ - std r9,_TRAP(r1); /* set trap number */ \ - li r10,0; \ - ld r11,exception_marker@toc(r2); \ - std r10,RESULT(r1); /* clear regs->result */ \ - std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ - -/* - * Exception vectors. - */ -#define STD_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) - -#define HSTD_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r20; /* save r20 */ \ - mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \ - mtspr SPRN_SRR0,r20; \ - mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \ - mtspr SPRN_SRR1,r20; \ - mfspr r20,SPRN_SPRG1; /* restore r20 */ \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) - - -#define MASKABLE_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \ - std r10,PACA_EXGEN+EX_R10(r13); \ - lbz r10,PACASOFTIRQEN(r13); \ - mfcr r9; \ - cmpwi r10,0; \ - beq masked_interrupt; \ - mfspr r10,SPRN_SPRG1; \ - std r10,PACA_EXGEN+EX_R13(r13); \ - std r11,PACA_EXGEN+EX_R11(r13); \ - std r12,PACA_EXGEN+EX_R12(r13); \ - clrrdi r12,r13,32; /* get high part of &label */ \ - mfmsr r10; \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - LOAD_HANDLER(r12,label##_common) \ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -#define STD_EXCEPTION_ISERIES(n, label, area) \ - .globl label##_iSeries; \ -label##_iSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - EXCEPTION_PROLOG_ISERIES_1(area); \ - EXCEPTION_PROLOG_ISERIES_2; \ - b label##_common - -#define MASKABLE_EXCEPTION_ISERIES(n, label) \ - .globl label##_iSeries; \ -label##_iSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \ - lbz r10,PACASOFTIRQEN(r13); \ - cmpwi 0,r10,0; \ - beq- label##_iSeries_masked; \ - EXCEPTION_PROLOG_ISERIES_2; \ - b label##_common; \ - -#ifdef CONFIG_PPC_ISERIES -#define DISABLE_INTS \ - li r11,0; \ - stb r11,PACASOFTIRQEN(r13); \ -BEGIN_FW_FTR_SECTION; \ - stb r11,PACAHARDIRQEN(r13); \ -END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ -BEGIN_FW_FTR_SECTION; \ - mfmsr r10; \ - ori r10,r10,MSR_EE; \ - mtmsrd r10,1; \ -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) - -#else -#define DISABLE_INTS \ - li r11,0; \ - stb r11,PACASOFTIRQEN(r13); \ - stb r11,PACAHARDIRQEN(r13) - -#endif /* CONFIG_PPC_ISERIES */ - -#define ENABLE_INTS \ - ld r12,_MSR(r1); \ - mfmsr r11; \ - rlwimi r11,r12,0,MSR_EE; \ - mtmsrd r11,1 - -#define STD_EXCEPTION_COMMON(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - DISABLE_INTS; \ - bl .save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except - -/* - * Like STD_EXCEPTION_COMMON, but for exceptions that can occur - * in the idle task and therefore need the special idle handling. - */ -#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - FINISH_NAP; \ - DISABLE_INTS; \ - bl .save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except - -#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - FINISH_NAP; \ - DISABLE_INTS; \ - bl .ppc64_runlatch_on; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except_lite - -/* - * When the idle code in power4_idle puts the CPU into NAP mode, - * it has to do so in a loop, and relies on the external interrupt - * and decrementer interrupt entry code to get it out of the loop. - * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags - * to signal that it is in the loop and needs help to get out. - */ -#ifdef CONFIG_PPC_970_NAP -#define FINISH_NAP \ -BEGIN_FTR_SECTION \ - clrrdi r11,r1,THREAD_SHIFT; \ - ld r9,TI_LOCAL_FLAGS(r11); \ - andi. r10,r9,_TLF_NAPPING; \ - bnel power4_fixup_nap; \ -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) -#else -#define FINISH_NAP -#endif - -/* - * Start of pSeries system interrupt routines - */ . = 0x100 .globl __start_interrupts __start_interrupts: @@ -691,192 +358,6 @@ machine_check_fwnmi: mtspr SPRN_SPRG1,r13 /* save r13 */ EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXMC, machine_check_common) -#ifdef CONFIG_PPC_ISERIES -/*** ISeries-LPAR interrupt handlers ***/ - - STD_EXCEPTION_ISERIES(0x200, machine_check, PACA_EXMC) - - .globl data_access_iSeries -data_access_iSeries: - mtspr SPRN_SPRG1,r13 -BEGIN_FTR_SECTION - mtspr SPRN_SPRG2,r12 - mfspr r13,SPRN_DAR - mfspr r12,SPRN_DSISR - srdi r13,r13,60 - rlwimi r13,r12,16,0x20 - mfcr r12 - cmpwi r13,0x2c - beq .do_stab_bolted_iSeries - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN) - EXCEPTION_PROLOG_ISERIES_2 - b data_access_common - -.do_stab_bolted_iSeries: - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 - EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB) - EXCEPTION_PROLOG_ISERIES_2 - b .do_stab_bolted - - .globl data_access_slb_iSeries -data_access_slb_iSeries: - mtspr SPRN_SPRG1,r13 /* save r13 */ - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r3,SPRN_DAR - std r9,PACA_EXSLB+EX_R9(r13) - mfcr r9 -#ifdef __DISABLED__ - cmpdi r3,0 - bge slb_miss_user_iseries -#endif - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - ld r12,PACALPPACAPTR(r13) - ld r12,LPPACASRR1(r12) - b .slb_miss_realmode - - STD_EXCEPTION_ISERIES(0x400, instruction_access, PACA_EXGEN) - - .globl instruction_access_slb_iSeries -instruction_access_slb_iSeries: - mtspr SPRN_SPRG1,r13 /* save r13 */ - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - ld r3,PACALPPACAPTR(r13) - ld r3,LPPACASRR0(r3) /* get SRR0 value */ - std r9,PACA_EXSLB+EX_R9(r13) - mfcr r9 -#ifdef __DISABLED__ - cmpdi r3,0 - bge .slb_miss_user_iseries -#endif - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - ld r12,PACALPPACAPTR(r13) - ld r12,LPPACASRR1(r12) - b .slb_miss_realmode - -#ifdef __DISABLED__ -slb_miss_user_iseries: - std r10,PACA_EXGEN+EX_R10(r13) - std r11,PACA_EXGEN+EX_R11(r13) - std r12,PACA_EXGEN+EX_R12(r13) - mfspr r10,SPRG1 - ld r11,PACA_EXSLB+EX_R9(r13) - ld r12,PACA_EXSLB+EX_R3(r13) - std r10,PACA_EXGEN+EX_R13(r13) - std r11,PACA_EXGEN+EX_R9(r13) - std r12,PACA_EXGEN+EX_R3(r13) - EXCEPTION_PROLOG_ISERIES_2 - b slb_miss_user_common -#endif - - MASKABLE_EXCEPTION_ISERIES(0x500, hardware_interrupt) - STD_EXCEPTION_ISERIES(0x600, alignment, PACA_EXGEN) - STD_EXCEPTION_ISERIES(0x700, program_check, PACA_EXGEN) - STD_EXCEPTION_ISERIES(0x800, fp_unavailable, PACA_EXGEN) - MASKABLE_EXCEPTION_ISERIES(0x900, decrementer) - STD_EXCEPTION_ISERIES(0xa00, trap_0a, PACA_EXGEN) - STD_EXCEPTION_ISERIES(0xb00, trap_0b, PACA_EXGEN) - - .globl system_call_iSeries -system_call_iSeries: - mr r9,r13 - mfspr r13,SPRN_SPRG3 - EXCEPTION_PROLOG_ISERIES_2 - b system_call_common - - STD_EXCEPTION_ISERIES( 0xd00, single_step, PACA_EXGEN) - STD_EXCEPTION_ISERIES( 0xe00, trap_0e, PACA_EXGEN) - STD_EXCEPTION_ISERIES( 0xf00, performance_monitor, PACA_EXGEN) - - .globl system_reset_iSeries -system_reset_iSeries: - mfspr r13,SPRN_SPRG3 /* Get paca address */ - mfmsr r24 - ori r24,r24,MSR_RI - mtmsrd r24 /* RI on */ - lhz r24,PACAPACAINDEX(r13) /* Get processor # */ - cmpwi 0,r24,0 /* Are we processor 0? */ - bne 1f - b .__start_initialization_iSeries /* Start up the first processor */ -1: mfspr r4,SPRN_CTRLF - li r5,CTRL_RUNLATCH /* Turn off the run light */ - andc r4,r4,r5 - mtspr SPRN_CTRLT,r4 - -1: - HMT_LOW -#ifdef CONFIG_SMP - lbz r23,PACAPROCSTART(r13) /* Test if this processor - * should start */ - sync - LOAD_REG_IMMEDIATE(r3,current_set) - sldi r28,r24,3 /* get current_set[cpu#] */ - ldx r3,r3,r28 - addi r1,r3,THREAD_SIZE - subi r1,r1,STACK_FRAME_OVERHEAD - - cmpwi 0,r23,0 - beq iSeries_secondary_smp_loop /* Loop until told to go */ - bne __secondary_start /* Loop until told to go */ -iSeries_secondary_smp_loop: - /* Let the Hypervisor know we are alive */ - /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */ - lis r3,0x8002 - rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */ -#else /* CONFIG_SMP */ - /* Yield the processor. This is required for non-SMP kernels - which are running on multi-threaded machines. */ - lis r3,0x8000 - rldicr r3,r3,32,15 /* r3 = (r3 << 32) & 0xffff000000000000 */ - addi r3,r3,18 /* r3 = 0x8000000000000012 which is "yield" */ - li r4,0 /* "yield timed" */ - li r5,-1 /* "yield forever" */ -#endif /* CONFIG_SMP */ - li r0,-1 /* r0=-1 indicates a Hypervisor call */ - sc /* Invoke the hypervisor via a system call */ - mfspr r13,SPRN_SPRG3 /* Put r13 back ???? */ - b 1b /* If SMP not configured, secondaries - * loop forever */ - -decrementer_iSeries_masked: - /* We may not have a valid TOC pointer in here. */ - li r11,1 - ld r12,PACALPPACAPTR(r13) - stb r11,LPPACADECRINT(r12) - LOAD_REG_IMMEDIATE(r12, tb_ticks_per_jiffy) - lwz r12,0(r12) - mtspr SPRN_DEC,r12 - /* fall through */ - -hardware_interrupt_iSeries_masked: - mtcrf 0x80,r9 /* Restore regs */ - ld r12,PACALPPACAPTR(r13) - ld r11,LPPACASRR0(r12) - ld r12,LPPACASRR1(r12) - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 - ld r9,PACA_EXGEN+EX_R9(r13) - ld r10,PACA_EXGEN+EX_R10(r13) - ld r11,PACA_EXGEN+EX_R11(r13) - ld r12,PACA_EXGEN+EX_R12(r13) - ld r13,PACA_EXGEN+EX_R13(r13) - rfid - b . /* prevent speculative execution */ -#endif /* CONFIG_PPC_ISERIES */ - /*** Common interrupt handlers ***/ STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception) @@ -1519,8 +1000,8 @@ _GLOBAL(do_stab_bolted) * Space for CPU0's segment table. * * On iSeries, the hypervisor must fill in at least one entry before - * we get control (with relocate on). The address is give to the hv - * as a page number (see xLparMap in lpardata.c), so this must be at a + * we get control (with relocate on). The address is given to the hv + * as a page number (see xLparMap below), so this must be at a * fixed address (the linker can't compute (u64)&initial_stab >> * PAGE_SHIFT). */ @@ -1542,12 +1023,22 @@ fwnmi_data_area: * both pSeries and iSeries */ #ifdef CONFIG_PPC_ISERIES . = LPARMAP_PHYS -#include "lparmap.s" -/* - * This ".text" is here for old compilers that generate a trailing - * .note section when compiling .c files to .s - */ - .text + .globl xLparMap +xLparMap: + .quad HvEsidsToMap /* xNumberEsids */ + .quad HvRangesToMap /* xNumberRanges */ + .quad STAB0_PAGE /* xSegmentTableOffs */ + .zero 40 /* xRsvd */ + /* xEsids (HvEsidsToMap entries of 2 quads) */ + .quad PAGE_OFFSET_ESID /* xKernelEsid */ + .quad PAGE_OFFSET_VSID /* xKernelVsid */ + .quad VMALLOC_START_ESID /* xKernelEsid */ + .quad VMALLOC_START_VSID /* xKernelVsid */ + /* xRanges (HvRangesToMap entries of 3 quads) */ + .quad HvPagesToMap /* xPages */ + .quad 0 /* xOffset */ + .quad PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT) /* xVPN */ + #endif /* CONFIG_PPC_ISERIES */ . = 0x8000 @@ -1611,39 +1102,6 @@ _GLOBAL(generic_secondary_smp_init) b __secondary_start #endif -#ifdef CONFIG_PPC_ISERIES -_INIT_STATIC(__start_initialization_iSeries) - /* Clear out the BSS */ - LOAD_REG_IMMEDIATE(r11,__bss_stop) - LOAD_REG_IMMEDIATE(r8,__bss_start) - sub r11,r11,r8 /* bss size */ - addi r11,r11,7 /* round up to an even double word */ - rldicl. r11,r11,61,3 /* shift right by 3 */ - beq 4f - addi r8,r8,-8 - li r0,0 - mtctr r11 /* zero this many doublewords */ -3: stdu r0,8(r8) - bdnz 3b -4: - LOAD_REG_IMMEDIATE(r1,init_thread_union) - addi r1,r1,THREAD_SIZE - li r0,0 - stdu r0,-STACK_FRAME_OVERHEAD(r1) - - LOAD_REG_IMMEDIATE(r2,__toc_start) - addi r2,r2,0x4000 - addi r2,r2,0x4000 - - bl .iSeries_early_setup - bl .early_setup - - /* relocation is on at this point */ - - b .start_here_common -#endif /* CONFIG_PPC_ISERIES */ - - _STATIC(__mmu_off) mfmsr r3 andi. r0,r3,MSR_IR|MSR_DR @@ -1891,6 +1349,7 @@ _GLOBAL(pmac_secondary_start) * r13 = paca virtual address * SPRG3 = paca virtual address */ + .globl __secondary_start __secondary_start: /* Set thread priority to MEDIUM */ HMT_MEDIUM @@ -2021,7 +1480,7 @@ _INIT_STATIC(start_here_multiplatform) b . /* prevent speculative execution */ /* This is where all platforms converge execution */ -_INIT_STATIC(start_here_common) +_INIT_GLOBAL(start_here_common) /* relocation is on at this point */ /* The following code sets up the SP and TOC now that we are */ diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index c08ceca6277..e4ec6eee81a 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -30,7 +30,6 @@ #include <linux/spinlock.h> #include <linux/string.h> #include <linux/dma-mapping.h> -#include <linux/init.h> #include <linux/bitops.h> #include <asm/io.h> #include <asm/prom.h> diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 24bea97c736..dfad0e469ee 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -272,7 +272,7 @@ void do_IRQ(struct pt_regs *regs) struct thread_info *curtp, *irqtp; #endif - irq_enter(); + irq_enter(); #ifdef CONFIG_DEBUG_STACKOVERFLOW /* Debugging check for stack overflow: is there less than 2KB free? */ @@ -321,7 +321,7 @@ void do_IRQ(struct pt_regs *regs) /* That's not SMP safe ... but who cares ? */ ppc_spurious_interrupts++; - irq_exit(); + irq_exit(); set_irq_regs(old_regs); #ifdef CONFIG_PPC_ISERIES diff --git a/arch/powerpc/kernel/lparmap.c b/arch/powerpc/kernel/lparmap.c deleted file mode 100644 index af11285ffbd..00000000000 --- a/arch/powerpc/kernel/lparmap.c +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 2005 Stephen Rothwell IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/iseries/lpar_map.h> - -/* The # is to stop gcc trying to make .text nonexecutable */ -const struct LparMap __attribute__((__section__(".text #"))) xLparMap = { - .xNumberEsids = HvEsidsToMap, - .xNumberRanges = HvRangesToMap, - .xSegmentTableOffs = STAB0_PAGE, - - .xEsids = { - { .xKernelEsid = GET_ESID(PAGE_OFFSET), - .xKernelVsid = KERNEL_VSID(PAGE_OFFSET), }, - { .xKernelEsid = GET_ESID(VMALLOC_START), - .xKernelVsid = KERNEL_VSID(VMALLOC_START), }, - }, - - .xRanges = { - { .xPages = HvPagesToMap, - .xOffset = 0, - .xVPN = KERNEL_VSID(PAGE_OFFSET) << (SID_SHIFT - HW_PAGE_SHIFT), - }, - }, -}; diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c index f9676f52c6d..0ed31f22048 100644 --- a/arch/powerpc/kernel/nvram_64.c +++ b/arch/powerpc/kernel/nvram_64.c @@ -34,21 +34,10 @@ #undef DEBUG_NVRAM -static int nvram_scan_partitions(void); -static int nvram_setup_partition(void); -static int nvram_create_os_partition(void); -static int nvram_remove_os_partition(void); - static struct nvram_partition * nvram_part; static long nvram_error_log_index = -1; static long nvram_error_log_size = 0; -int no_logging = 1; /* Until we initialize everything, - * make sure we don't try logging - * anything */ - -extern volatile int error_log_cnt; - struct err_log_info { int error_type; unsigned int seq_num; @@ -636,16 +625,13 @@ void __exit nvram_cleanup(void) * sequence #: The unique sequence # for each event. (until it wraps) * error log: The error log from event_scan */ -int nvram_write_error_log(char * buff, int length, unsigned int err_type) +int nvram_write_error_log(char * buff, int length, + unsigned int err_type, unsigned int error_log_cnt) { int rc; loff_t tmp_index; struct err_log_info info; - if (no_logging) { - return -EPERM; - } - if (nvram_error_log_index == -1) { return -ESPIPE; } @@ -678,7 +664,8 @@ int nvram_write_error_log(char * buff, int length, unsigned int err_type) * * Reads nvram for error log for at most 'length' */ -int nvram_read_error_log(char * buff, int length, unsigned int * err_type) +int nvram_read_error_log(char * buff, int length, + unsigned int * err_type, unsigned int * error_log_cnt) { int rc; loff_t tmp_index; @@ -704,7 +691,7 @@ int nvram_read_error_log(char * buff, int length, unsigned int * err_type) return rc; } - error_log_cnt = info.seq_num; + *error_log_cnt = info.seq_num; *err_type = info.error_type; return 0; diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 04a3109ae3c..0e2bee46304 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -1457,8 +1457,8 @@ null_write_config(struct pci_bus *bus, unsigned int devfn, int offset, static struct pci_ops null_pci_ops = { - null_read_config, - null_write_config + .read = null_read_config, + .write = null_write_config, }; /* diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index a20f1951a5c..430c502179c 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -180,7 +180,7 @@ EXPORT_SYMBOL(cacheable_memcpy); EXPORT_SYMBOL(cpm_install_handler); EXPORT_SYMBOL(cpm_free_handler); #endif /* CONFIG_8xx */ -#if defined(CONFIG_8xx) || defined(CONFIG_40x) +#if defined(CONFIG_8xx) EXPORT_SYMBOL(__res); #endif diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index a38197b12d3..0028fe68e09 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -52,7 +52,6 @@ #include <asm/pSeries_reconfig.h> #include <asm/pci-bridge.h> #include <asm/kexec.h> -#include <asm/system.h> #ifdef DEBUG #define DBG(fmt...) printk(KERN_ERR fmt) diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index a1d582e3862..29c2160bcbb 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2046,6 +2046,7 @@ static void __init fixup_device_tree_maple(void) /* * Pegasos and BriQ lacks the "ranges" property in the isa node * Pegasos needs decimal IRQ 14/15, not hexadecimal + * Pegasos has the IDE configured in legacy mode, but advertised as native */ static void __init fixup_device_tree_chrp(void) { @@ -2083,9 +2084,13 @@ static void __init fixup_device_tree_chrp(void) prom_printf("Fixing up IDE interrupt on Pegasos...\n"); prop[0] = 14; prop[1] = 0x0; - prop[2] = 15; - prop[3] = 0x0; - prom_setprop(ph, name, "interrupts", prop, 4*sizeof(u32)); + prom_setprop(ph, name, "interrupts", prop, 2*sizeof(u32)); + prom_printf("Fixing up IDE class-code on Pegasos...\n"); + rc = prom_getprop(ph, "class-code", prop, sizeof(u32)); + if (rc == sizeof(u32)) { + prop[0] &= ~0x5; + prom_setprop(ph, name, "class-code", prop, sizeof(u32)); + } } } #else diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index a5de6211b97..21f14e57d1f 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -171,8 +171,8 @@ static int rtas_pci_write_config(struct pci_bus *bus, } struct pci_ops rtas_pci_ops = { - rtas_pci_read_config, - rtas_pci_write_config + .read = rtas_pci_read_config, + .write = rtas_pci_write_config, }; int is_python(struct device_node *dev) diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 7ec6ba56d83..a288a5f2dbc 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -18,13 +18,11 @@ #include <linux/cpu.h> #include <linux/console.h> -#include <asm/residual.h> #include <asm/io.h> #include <asm/prom.h> #include <asm/processor.h> #include <asm/pgtable.h> #include <asm/setup.h> -#include <asm/amigappc.h> #include <asm/smp.h> #include <asm/elf.h> #include <asm/cputable.h> diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 727a6699f2f..b5944d8e380 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -72,7 +72,6 @@ #include <asm/iseries/it_lp_queue.h> #include <asm/iseries/hv_call_xm.h> #endif -#include <asm/smp.h> /* keep track of when we need to update the rtc */ time_t last_rtc_update; @@ -867,7 +866,7 @@ void __init generic_calibrate_decr(void) "(not found)\n"); } -#ifdef CONFIG_BOOKE +#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) /* Set the time base to zero */ mtspr(SPRN_TBWL, 0); mtspr(SPRN_TBWU, 0); diff --git a/arch/powerpc/mm/4xx_mmu.c b/arch/powerpc/mm/40x_mmu.c index 7ff2609b64d..e067df836be 100644 --- a/arch/powerpc/mm/4xx_mmu.c +++ b/arch/powerpc/mm/40x_mmu.c @@ -108,7 +108,7 @@ unsigned long __init mmu_mapin_ram(void) pmd_t *pmdp; unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE; - pmdp = pmd_offset(pgd_offset_k(v), v); + pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v); pmd_val(*pmdp++) = val; pmd_val(*pmdp++) = val; pmd_val(*pmdp++) = val; @@ -123,7 +123,7 @@ unsigned long __init mmu_mapin_ram(void) pmd_t *pmdp; unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE; - pmdp = pmd_offset(pgd_offset_k(v), v); + pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v); pmd_val(*pmdp) = val; v += LARGE_PAGE_SIZE_4M; diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 7e4d27ad3de..bf20fa68880 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_PPC64) += init_64.o pgtable_64.o mmu_context_64.o \ hash_utils_64.o hash_low_64.o tlb_64.o \ slb_low.o slb.o stab.o mmap.o $(hash-y) obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o hash_low_32.o tlb_32.o -obj-$(CONFIG_40x) += 4xx_mmu.o +obj-$(CONFIG_40x) += 40x_mmu.o obj-$(CONFIG_44x) += 44x_mmu.o obj-$(CONFIG_FSL_BOOKE) += fsl_booke_mmu.o obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index a47151e806c..d525f2eba31 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -49,7 +49,6 @@ #include <asm/tlb.h> #include <asm/cacheflush.h> #include <asm/cputable.h> -#include <asm/abs_addr.h> #include <asm/sections.h> #include <asm/spu.h> @@ -602,13 +601,7 @@ static void demote_segment_4k(struct mm_struct *mm, unsigned long addr) { if (mm->context.user_psize == MMU_PAGE_4K) return; -#ifdef CONFIG_PPC_MM_SLICES slice_set_user_psize(mm, MMU_PAGE_4K); -#else /* CONFIG_PPC_MM_SLICES */ - mm->context.user_psize = MMU_PAGE_4K; - mm->context.sllp = SLB_VSID_USER | mmu_psize_defs[MMU_PAGE_4K].sllp; -#endif /* CONFIG_PPC_MM_SLICES */ - #ifdef CONFIG_SPU_BASE spu_flush_all_slbs(mm); #endif diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 4835f73af30..ba5f12a6046 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -22,11 +22,8 @@ #include <asm/mmu_context.h> #include <asm/machdep.h> #include <asm/cputable.h> -#include <asm/tlb.h> #include <asm/spu.h> -#include <linux/sysctl.h> - #define NUM_LOW_AREAS (0x100000000UL >> SID_SHIFT) #define NUM_HIGH_AREAS (PGTABLE_RANGE >> HTLB_AREA_SHIFT) diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index e1f5ded851f..d65995ae827 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -41,7 +41,6 @@ #include <asm/machdep.h> #include <asm/btext.h> #include <asm/tlb.h> -#include <asm/prom.h> #include <asm/lmb.h> #include <asm/sections.h> diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index f0e7eedb1ba..32dcfc9b008 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -42,7 +42,6 @@ #include <asm/machdep.h> #include <asm/btext.h> #include <asm/tlb.h> -#include <asm/prom.h> #include <asm/lmb.h> #include <asm/sections.h> #include <asm/vdso.h> diff --git a/arch/powerpc/mm/mmu_context_64.c b/arch/powerpc/mm/mmu_context_64.c index 7a78cdc0515..1db38ba1f54 100644 --- a/arch/powerpc/mm/mmu_context_64.c +++ b/arch/powerpc/mm/mmu_context_64.c @@ -28,7 +28,6 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { int index; int err; - int new_context = (mm->context.id == 0); again: if (!idr_pre_get(&mmu_context_idr, GFP_KERNEL)) @@ -50,19 +49,13 @@ again: return -ENOMEM; } - mm->context.id = index; -#ifdef CONFIG_PPC_MM_SLICES /* The old code would re-promote on fork, we don't do that * when using slices as it could cause problem promoting slices * that have been forced down to 4K */ - if (new_context) + if (slice_mm_new_context(mm)) slice_set_user_psize(mm, mmu_virtual_psize); -#else - mm->context.user_psize = mmu_virtual_psize; - mm->context.sllp = SLB_VSID_USER | - mmu_psize_defs[mmu_virtual_psize].sllp; -#endif + mm->context.id = index; return 0; } diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c index d5fd3909d13..319826ef164 100644 --- a/arch/powerpc/mm/slice.c +++ b/arch/powerpc/mm/slice.c @@ -551,6 +551,7 @@ EXPORT_SYMBOL_GPL(get_slice_psize); * * This is also called in init_new_context() to change back the user * psize from whatever the parent context had it set to + * N.B. This may be called before mm->context.id has been set. * * This function will only change the content of the {low,high)_slice_psize * masks, it will not flush SLBs as this shall be handled lazily by the diff --git a/arch/powerpc/platforms/4xx/Kconfig b/arch/powerpc/platforms/40x/Kconfig index ded357c1741..2cc7343b468 100644 --- a/arch/powerpc/platforms/4xx/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -1,16 +1,3 @@ -config 4xx - bool - depends on 40x || 44x - default y - -config BOOKE - bool - depends on 44x - default y - -menu "AMCC 40x options" - depends on 40x - #config BUBINGA # bool "Bubinga" # depends on 40x @@ -82,8 +69,6 @@ menu "AMCC 40x options" # help # This option enables support for the Xilinx ML300 evaluation board. -endmenu - # 40x specific CPU modules, selected based on the board above. config NP405H bool @@ -126,68 +111,6 @@ config IBM405_ERR77 config IBM405_ERR51 bool -menu "AMCC 44x options" - depends on 44x - -#config BAMBOO -# bool "Bamboo" -# depends on 44x -# default n -# select 440EP -# help -# This option enables support for the IBM PPC440EP evaluation board. - -config EBONY - bool "Ebony" - depends on 44x - default y - select 440GP - help - This option enables support for the IBM PPC440GP evaluation board. - -#config LUAN -# bool "Luan" -# depends on 44x -# default n -# select 440SP -# help -# This option enables support for the IBM PPC440SP evaluation board. - -#config OCOTEA -# bool "Ocotea" -# depends on 44x -# default n -# select 440GX -# help -# This option enables support for the IBM PPC440GX evaluation board. - -endmenu - -# 44x specific CPU modules, selected based on the board above. -config 440EP - bool - select PPC_FPU - select IBM440EP_ERR42 - -config 440GP - bool - select IBM_NEW_EMAC_ZMII - -config 440GX - bool - -config 440SP - bool - -config 440A - bool - depends on 440GX - default y - -# 44x errata/workaround config symbols, selected by the CPU models above -config IBM440EP_ERR42 - bool - #config XILINX_OCP # bool # depends on XILINX_ML300 diff --git a/arch/powerpc/platforms/4xx/Makefile b/arch/powerpc/platforms/40x/Makefile index 79ff6b1e887..79ff6b1e887 100644 --- a/arch/powerpc/platforms/4xx/Makefile +++ b/arch/powerpc/platforms/40x/Makefile diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 1b3e008fd14..c7cc12a2f26 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -1,10 +1,10 @@ -#config BAMBOO -# bool "Bamboo" -# depends on 44x -# default n -# select 440EP -# help -# This option enables support for the IBM PPC440EP evaluation board. +config BAMBOO + bool "Bamboo" + depends on 44x + default n + select 440EP + help + This option enables support for the IBM PPC440EP evaluation board. config EBONY bool "Ebony" @@ -35,6 +35,7 @@ config 440EP bool select PPC_FPU select IBM440EP_ERR42 +# select IBM_NEW_EMAC_ZMII config 440GP bool diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 41d0a18a0e4..47ccc3659e3 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_44x) := misc_44x.o obj-$(CONFIG_EBONY) += ebony.o +obj-$(CONFIG_BAMBOO) += bamboo.o diff --git a/arch/powerpc/platforms/44x/bamboo.c b/arch/powerpc/platforms/44x/bamboo.c new file mode 100644 index 00000000000..5522f1f9642 --- /dev/null +++ b/arch/powerpc/platforms/44x/bamboo.c @@ -0,0 +1,66 @@ +/* + * Bamboo board specific routines + * + * Wade Farnsworth <wfarnsworth@mvista.com> + * Copyright 2004 MontaVista Software Inc. + * + * Rewritten and ported to the merged powerpc tree: + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright 2007 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/init.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/of_platform.h> +#include "44x.h" + +static struct of_device_id bamboo_of_bus[] = { + { .compatible = "ibm,plb", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init bamboo_device_probe(void) +{ + if (!machine_is(bamboo)) + return 0; + + of_platform_bus_probe(NULL, bamboo_of_bus, NULL); + + return 0; +} +device_initcall(bamboo_device_probe); + +static int __init bamboo_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "amcc,bamboo")) + return 0; + + return 1; +} + +static void __init bamboo_setup_arch(void) +{ +} + +define_machine(bamboo) { + .name = "Bamboo", + .probe = bamboo_probe, + .setup_arch = bamboo_setup_arch, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc44x_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c index 4be6e7a17b6..4263158b327 100644 --- a/arch/powerpc/platforms/52xx/efika.c +++ b/arch/powerpc/platforms/52xx/efika.c @@ -78,8 +78,8 @@ static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, } static struct pci_ops rtas_pci_ops = { - rtas_read_config, - rtas_write_config + .read = rtas_read_config, + .write = rtas_write_config, }; diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c index 5c46e898fd4..ce3f6951828 100644 --- a/arch/powerpc/platforms/52xx/lite5200.c +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -35,7 +35,6 @@ #include <asm/io.h> #include <asm/machdep.h> #include <asm/ipic.h> -#include <asm/bootinfo.h> #include <asm/irq.h> #include <asm/prom.h> #include <asm/udbg.h> @@ -109,22 +108,13 @@ static void lite5200_resume_finish(void __iomem *mbar) static void __init lite5200_setup_arch(void) { +#ifdef CONFIG_PCI struct device_node *np; +#endif if (ppc_md.progress) ppc_md.progress("lite5200_setup_arch()", 0); - np = of_find_node_by_type(NULL, "cpu"); - if (np) { - const unsigned int *fp = - of_get_property(np, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(np); - } - /* CPU & Port mux setup */ mpc52xx_setup_cpu(); /* Generic */ lite5200_setup_cpu(); /* Platorm specific */ diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c index fbfff95b443..8c464c55b5d 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c @@ -22,7 +22,6 @@ #include <linux/init.h> #include <linux/sched.h> #include <linux/signal.h> -#include <linux/stddef.h> #include <linux/delay.h> #include <linux/irq.h> #include <linux/hardirq.h> diff --git a/arch/powerpc/platforms/82xx/m82xx_pci.h b/arch/powerpc/platforms/82xx/m82xx_pci.h index 9cd8893b5a3..65e38a7ff48 100644 --- a/arch/powerpc/platforms/82xx/m82xx_pci.h +++ b/arch/powerpc/platforms/82xx/m82xx_pci.h @@ -8,8 +8,6 @@ * 2 of the License, or (at your option) any later version. */ -#include <asm/m8260_pci.h> - #define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET) #ifndef _IO_BASE diff --git a/arch/powerpc/platforms/82xx/mpc82xx.c b/arch/powerpc/platforms/82xx/mpc82xx.c index cc9900d2e5e..c706871aec1 100644 --- a/arch/powerpc/platforms/82xx/mpc82xx.c +++ b/arch/powerpc/platforms/82xx/mpc82xx.c @@ -36,7 +36,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/bootinfo.h> #include <asm/pci-bridge.h> #include <asm/mpc8260.h> #include <asm/irq.h> diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c index 2d1b05b9f8e..c0a0c56ac5b 100644 --- a/arch/powerpc/platforms/82xx/mpc82xx_ads.c +++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c @@ -37,7 +37,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/bootinfo.h> #include <asm/pci-bridge.h> #include <asm/mpc8260.h> #include <asm/irq.h> diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h index 5b5cca6c8c8..6f749b76dd8 100644 --- a/arch/powerpc/platforms/82xx/pq2ads.h +++ b/arch/powerpc/platforms/82xx/pq2ads.h @@ -23,7 +23,6 @@ #define __MACH_ADS8260_DEFS #include <linux/seq_file.h> -#include <asm/ppcboot.h> /* For our show_cpuinfo hooks. */ #define CPUINFO_VENDOR "Freescale Semiconductor" diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index 2c8e641a739..61e3f1cb0a7 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -32,7 +32,6 @@ #include <asm/io.h> #include <asm/machdep.h> #include <asm/ipic.h> -#include <asm/bootinfo.h> #include <asm/irq.h> #include <asm/prom.h> #include <asm/udbg.h> diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 47ba5446f63..6d06645e5ba 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -30,7 +30,6 @@ #include <asm/io.h> #include <asm/machdep.h> #include <asm/ipic.h> -#include <asm/bootinfo.h> #include <asm/irq.h> #include <asm/prom.h> #include <asm/udbg.h> diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index 4c9ff9cadfe..f8aba9a488b 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -30,7 +30,6 @@ #include <asm/io.h> #include <asm/machdep.h> #include <asm/ipic.h> -#include <asm/bootinfo.h> #include <asm/irq.h> #include <asm/prom.h> #include <asm/udbg.h> diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c index 84b58934aaf..69970b910c1 100644 --- a/arch/powerpc/platforms/83xx/mpc836x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c @@ -38,7 +38,6 @@ #include <asm/io.h> #include <asm/machdep.h> #include <asm/ipic.h> -#include <asm/bootinfo.h> #include <asm/irq.h> #include <asm/prom.h> #include <asm/udbg.h> diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 6a171e9abf7..04023347238 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -35,7 +35,6 @@ #include <asm/io.h> #include <asm/machdep.h> #include <asm/ipic.h> -#include <asm/bootinfo.h> #include <asm/pci-bridge.h> #include <asm/mpc85xx.h> #include <asm/irq.h> diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index be25ecd911b..53830c9a88f 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -38,7 +38,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/bootinfo.h> #include <asm/pci-bridge.h> #include <asm/mpc85xx.h> #include <asm/irq.h> diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c index f1693550c70..b2b98dd8be6 100644 --- a/arch/powerpc/platforms/8xx/m8xx_setup.c +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c @@ -36,13 +36,11 @@ #include <asm/mmu.h> #include <asm/reg.h> -#include <asm/residual.h> #include <asm/io.h> #include <asm/pgtable.h> #include <asm/mpc8xx.h> #include <asm/8xx_immap.h> #include <asm/machdep.h> -#include <asm/bootinfo.h> #include <asm/time.h> #include <asm/prom.h> #include <asm/fs_pd.h> @@ -55,7 +53,9 @@ struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops; #endif void m8xx_calibrate_decr(void); +#ifdef CONFIG_8xx_WDT extern void m8xx_wdt_handler_install(bd_t *bp); +#endif extern int cpm_pic_init(void); extern int cpm_get_irq(void); @@ -89,24 +89,24 @@ init_internal_rtc(void) static int __init get_freq(char *name, unsigned long *val) { - struct device_node *cpu; - const unsigned int *fp; - int found = 0; + struct device_node *cpu; + const unsigned int *fp; + int found = 0; - /* The cpu node should have timebase and clock frequency properties */ - cpu = of_find_node_by_type(NULL, "cpu"); + /* The cpu node should have timebase and clock frequency properties */ + cpu = of_find_node_by_type(NULL, "cpu"); - if (cpu) { - fp = of_get_property(cpu, name, NULL); - if (fp) { - found = 1; - *val = *fp; - } + if (cpu) { + fp = of_get_property(cpu, name, NULL); + if (fp) { + found = 1; + *val = *fp; + } - of_node_put(cpu); - } + of_node_put(cpu); + } - return found; + return found; } /* The decrementer counts at the system (internal) clock frequency divided by @@ -122,7 +122,7 @@ void __init mpc8xx_calibrate_decr(void) sit8xx_t *sys_tmr2; int irq, virq; - clk_r1 = (cark8xx_t *) immr_map(im_clkrstk); + clk_r1 = (cark8xx_t *) immr_map(im_clkrstk); /* Unlock the SCCR. */ out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY); @@ -130,24 +130,24 @@ void __init mpc8xx_calibrate_decr(void) immr_unmap(clk_r1); /* Force all 8xx processors to use divide by 16 processor clock. */ - clk_r2 = (car8xx_t *) immr_map(im_clkrst); + clk_r2 = (car8xx_t *) immr_map(im_clkrst); setbits32(&clk_r2->car_sccr, 0x02000000); immr_unmap(clk_r2); /* Processor frequency is MHz. */ - ppc_tb_freq = 50000000; - if (!get_freq("bus-frequency", &ppc_tb_freq)) { - printk(KERN_ERR "WARNING: Estimating decrementer frequency " - "(not found)\n"); - } - ppc_tb_freq /= 16; - ppc_proc_freq = 50000000; - if (!get_freq("clock-frequency", &ppc_proc_freq)) - printk(KERN_ERR "WARNING: Estimating processor frequency" - "(not found)\n"); - - printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); + ppc_tb_freq = 50000000; + if (!get_freq("bus-frequency", &ppc_tb_freq)) { + printk(KERN_ERR "WARNING: Estimating decrementer frequency " + "(not found)\n"); + } + ppc_tb_freq /= 16; + ppc_proc_freq = 50000000; + if (!get_freq("clock-frequency", &ppc_proc_freq)) + printk(KERN_ERR "WARNING: Estimating processor frequency" + "(not found)\n"); + + printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); /* Perform some more timer/timebase initialization. This used * to be done elsewhere, but other changes caused it to get @@ -164,7 +164,7 @@ void __init mpc8xx_calibrate_decr(void) * we guarantee the registers are locked, then we unlock them * for our use. */ - sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); + sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY); out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY); out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY); @@ -180,8 +180,8 @@ void __init mpc8xx_calibrate_decr(void) * we have to enable the timebase). The decrementer interrupt * is wired into the vector table, nothing to do here for that. */ - cpu = of_find_node_by_type(NULL, "cpu"); - virq= irq_of_parse_and_map(cpu, 0); + cpu = of_find_node_by_type(NULL, "cpu"); + virq= irq_of_parse_and_map(cpu, 0); irq = irq_map[virq].hwirq; sys_tmr2 = (sit8xx_t *) immr_map(im_sit); @@ -211,10 +211,10 @@ int mpc8xx_set_rtc_time(struct rtc_time *tm) sit8xx_t *sys_tmr2; int time; - sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); + sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk); sys_tmr2 = (sit8xx_t *) immr_map(im_sit); time = mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday, - tm->tm_hour, tm->tm_min, tm->tm_sec); + tm->tm_hour, tm->tm_min, tm->tm_sec); out_be32(&sys_tmr1->sitk_rtck, KAPWR_KEY); out_be32(&sys_tmr2->sit_rtc, time); @@ -233,8 +233,8 @@ void mpc8xx_get_rtc_time(struct rtc_time *tm) /* Get time from the RTC. */ data = in_be32(&sys_tmr->sit_rtc); to_tm(data, tm); - tm->tm_year -= 1900; - tm->tm_mon -= 1; + tm->tm_year -= 1900; + tm->tm_mon -= 1; immr_unmap(sys_tmr); return; } @@ -298,7 +298,7 @@ void __init m8xx_pic_init(void) int irq; if (mpc8xx_pic_init()) { - printk(KERN_ERR "Failed interrupt 8xx controller initialization\n"); + printk(KERN_ERR "Failed interrupt 8xx controller initialization\n"); return; } diff --git a/arch/powerpc/platforms/8xx/mpc86xads.h b/arch/powerpc/platforms/8xx/mpc86xads.h index 59bad2f9ae5..dd10cd20b6a 100644 --- a/arch/powerpc/platforms/8xx/mpc86xads.h +++ b/arch/powerpc/platforms/8xx/mpc86xads.h @@ -15,7 +15,6 @@ #ifndef __ASM_MPC86XADS_H__ #define __ASM_MPC86XADS_H__ -#include <asm/ppcboot.h> #include <sysdev/fsl_soc.h> /* U-Boot maps BCSR to 0xff080000 */ diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c index cf0e7bc8c2e..8f64f48698a 100644 --- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c @@ -31,7 +31,6 @@ #include <asm/processor.h> #include <asm/system.h> #include <asm/time.h> -#include <asm/ppcboot.h> #include <asm/mpc8xx.h> #include <asm/8xx_immap.h> #include <asm/commproc.h> @@ -254,20 +253,6 @@ int platform_device_skip(const char *model, int id) static void __init mpc86xads_setup_arch(void) { - struct device_node *cpu; - - cpu = of_find_node_by_type(NULL, "cpu"); - if (cpu != 0) { - const unsigned int *fp; - - fp = of_get_property(cpu, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(cpu); - } - cpm_reset(); mpc86xads_board_setup(); diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h index 7c31aec284c..14db1241706 100644 --- a/arch/powerpc/platforms/8xx/mpc885ads.h +++ b/arch/powerpc/platforms/8xx/mpc885ads.h @@ -15,7 +15,6 @@ #ifndef __ASM_MPC885ADS_H__ #define __ASM_MPC885ADS_H__ -#include <asm/ppcboot.h> #include <sysdev/fsl_soc.h> /* U-Boot maps BCSR to 0xff080000 */ diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c index 5a808d611ae..d3da38586b0 100644 --- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c @@ -32,7 +32,6 @@ #include <asm/processor.h> #include <asm/system.h> #include <asm/time.h> -#include <asm/ppcboot.h> #include <asm/mpc8xx.h> #include <asm/8xx_immap.h> #include <asm/commproc.h> @@ -406,20 +405,6 @@ int platform_device_skip(const char *model, int id) static void __init mpc885ads_setup_arch(void) { - struct device_node *cpu; - - cpu = of_find_node_by_type(NULL, "cpu"); - if (cpu != 0) { - const unsigned int *fp; - - fp = of_get_property(cpu, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(cpu); - } - cpm_reset(); mpc885ads_board_setup(); diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index cfc24974159..041df77ec11 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -19,6 +19,7 @@ config EMBEDDED6xx config PPC_82xx bool "Freescale 82xx" depends on 6xx + select WANT_DEVICE_TREE config PPC_83xx bool "Freescale 83xx" diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index e4b2aee53a7..86eb4cf31f0 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -36,10 +36,12 @@ config PPC_8xx bool "Freescale 8xx" select FSL_SOC select 8xx + select WANT_DEVICE_TREE config 40x bool "AMCC 40x" select PPC_DCR_NATIVE + select WANT_DEVICE_TREE config 44x bool "AMCC 44x" diff --git a/arch/powerpc/platforms/celleb/pci.c b/arch/powerpc/platforms/celleb/pci.c index e9ac19c4bba..11336b40fec 100644 --- a/arch/powerpc/platforms/celleb/pci.c +++ b/arch/powerpc/platforms/celleb/pci.c @@ -242,8 +242,8 @@ static int celleb_fake_pci_write_config(struct pci_bus *bus, } static struct pci_ops celleb_fake_pci_ops = { - celleb_fake_pci_read_config, - celleb_fake_pci_write_config + .read = celleb_fake_pci_read_config, + .write = celleb_fake_pci_write_config, }; static inline void celleb_setup_pci_base_addrs(struct pci_controller *hose, @@ -288,8 +288,8 @@ static inline void celleb_setup_pci_base_addrs(struct pci_controller *hose, celleb_config_write_fake(config, PCI_COMMAND, 2, val); } -static int __devinit celleb_setup_fake_pci_device(struct device_node *node, - struct pci_controller *hose) +static int __init celleb_setup_fake_pci_device(struct device_node *node, + struct pci_controller *hose) { unsigned int rlen; int num_base_addr = 0; @@ -418,8 +418,8 @@ error: return 1; } -static int __devinit phb_set_bus_ranges(struct device_node *dev, - struct pci_controller *phb) +static int __init phb_set_bus_ranges(struct device_node *dev, + struct pci_controller *phb) { const int *bus_range; unsigned int len; @@ -434,7 +434,7 @@ static int __devinit phb_set_bus_ranges(struct device_node *dev, return 0; } -static void __devinit celleb_alloc_private_mem(struct pci_controller *hose) +static void __init celleb_alloc_private_mem(struct pci_controller *hose) { if (mem_init_done) hose->private_data = @@ -444,7 +444,7 @@ static void __devinit celleb_alloc_private_mem(struct pci_controller *hose) alloc_bootmem(sizeof(struct celleb_pci_private)); } -int __devinit celleb_setup_phb(struct pci_controller *phb) +int __init celleb_setup_phb(struct pci_controller *phb) { const char *name; struct device_node *dev = phb->arch_data; diff --git a/arch/powerpc/platforms/celleb/scc_epci.c b/arch/powerpc/platforms/celleb/scc_epci.c index c4b011094bd..506fc844755 100644 --- a/arch/powerpc/platforms/celleb/scc_epci.c +++ b/arch/powerpc/platforms/celleb/scc_epci.c @@ -278,12 +278,12 @@ static int celleb_epci_write_config(struct pci_bus *bus, } struct pci_ops celleb_epci_ops = { - celleb_epci_read_config, - celleb_epci_write_config, + .read = celleb_epci_read_config, + .write = celleb_epci_write_config, }; /* to be moved in FW */ -static int __devinit celleb_epci_init(struct pci_controller *hose) +static int __init celleb_epci_init(struct pci_controller *hose) { u32 val; volatile void __iomem *reg, *epci_base; @@ -403,7 +403,7 @@ static int __devinit celleb_epci_init(struct pci_controller *hose) return 0; } -int __devinit celleb_setup_epci(struct device_node *node, +int __init celleb_setup_epci(struct device_node *node, struct pci_controller *hose) { struct resource r; diff --git a/arch/powerpc/platforms/celleb/scc_sio.c b/arch/powerpc/platforms/celleb/scc_sio.c index bcd25f54d98..bb98735ac46 100644 --- a/arch/powerpc/platforms/celleb/scc_sio.c +++ b/arch/powerpc/platforms/celleb/scc_sio.c @@ -28,18 +28,18 @@ /* sio irq0=0xb00010022 irq0=0xb00010023 irq2=0xb00010024 mmio=0xfff000-0x1000,0xff2000-0x1000 */ -static int txx9_serial_bitmap = 0; +static int txx9_serial_bitmap __initdata = 0; static struct { uint32_t offset; uint32_t index; -} txx9_scc_tab[3] = { +} txx9_scc_tab[3] __initdata = { { 0x300, 0 }, /* 0xFFF300 */ { 0x400, 0 }, /* 0xFFF400 */ { 0x800, 1 } /* 0xFF2800 */ }; -static int txx9_serial_init(void) +static int __init txx9_serial_init(void) { extern int early_serial_txx9_setup(struct uart_port *port); struct device_node *node; @@ -79,7 +79,7 @@ static int txx9_serial_init(void) return 0; } -static int txx9_serial_config(char *ptr) +static int __init txx9_serial_config(char *ptr) { int i; diff --git a/arch/powerpc/platforms/celleb/setup.c b/arch/powerpc/platforms/celleb/setup.c index 5e9f7f16357..1fca3f23533 100644 --- a/arch/powerpc/platforms/celleb/setup.c +++ b/arch/powerpc/platforms/celleb/setup.c @@ -73,7 +73,7 @@ static void celleb_show_cpuinfo(struct seq_file *m) of_node_put(root); } -static int celleb_machine_type_hack(char *ptr) +static int __init celleb_machine_type_hack(char *ptr) { strncpy(celleb_machine_type, ptr, sizeof(celleb_machine_type)); celleb_machine_type[sizeof(celleb_machine_type)-1] = 0; @@ -135,7 +135,7 @@ static void celleb_kexec_cpu_down(int crash, int secondary) } #endif -static struct of_device_id celleb_bus_ids[] = { +static struct of_device_id celleb_bus_ids[] __initdata = { { .type = "scc", }, { .type = "ioif", }, /* old style */ {}, diff --git a/arch/powerpc/platforms/chrp/gg2.h b/arch/powerpc/platforms/chrp/gg2.h new file mode 100644 index 00000000000..341ae55b99f --- /dev/null +++ b/arch/powerpc/platforms/chrp/gg2.h @@ -0,0 +1,61 @@ +/* + * include/asm-ppc/gg2.h -- VLSI VAS96011/12 `Golden Gate 2' register definitions + * + * Copyright (C) 1997 Geert Uytterhoeven + * + * This file is based on the following documentation: + * + * The VAS96011/12 Chipset, Data Book, Edition 1.0 + * VLSI Technology, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _ASMPPC_GG2_H +#define _ASMPPC_GG2_H + + /* + * Memory Map (CHRP mode) + */ + +#define GG2_PCI_MEM_BASE 0xc0000000 /* Peripheral memory space */ +#define GG2_ISA_MEM_BASE 0xf7000000 /* Peripheral memory alias */ +#define GG2_ISA_IO_BASE 0xf8000000 /* Peripheral I/O space */ +#define GG2_PCI_CONFIG_BASE 0xfec00000 /* PCI configuration space */ +#define GG2_INT_ACK_SPECIAL 0xfec80000 /* Interrupt acknowledge and */ + /* special PCI cycles */ +#define GG2_ROM_BASE0 0xff000000 /* ROM bank 0 */ +#define GG2_ROM_BASE1 0xff800000 /* ROM bank 1 */ + + + /* + * GG2 specific PCI Registers + */ + +extern void __iomem *gg2_pci_config_base; /* kernel virtual address */ + +#define GG2_PCI_BUSNO 0x40 /* Bus number */ +#define GG2_PCI_SUBBUSNO 0x41 /* Subordinate bus number */ +#define GG2_PCI_DISCCTR 0x42 /* Disconnect counter */ +#define GG2_PCI_PPC_CTRL 0x50 /* PowerPC interface control register */ +#define GG2_PCI_ADDR_MAP 0x5c /* Address map */ +#define GG2_PCI_PCI_CTRL 0x60 /* PCI interface control register */ +#define GG2_PCI_ROM_CTRL 0x70 /* ROM interface control register */ +#define GG2_PCI_ROM_TIME 0x74 /* ROM timing */ +#define GG2_PCI_CC_CTRL 0x80 /* Cache controller control register */ +#define GG2_PCI_DRAM_BANK0 0x90 /* Control register for DRAM bank #0 */ +#define GG2_PCI_DRAM_BANK1 0x94 /* Control register for DRAM bank #1 */ +#define GG2_PCI_DRAM_BANK2 0x98 /* Control register for DRAM bank #2 */ +#define GG2_PCI_DRAM_BANK3 0x9c /* Control register for DRAM bank #3 */ +#define GG2_PCI_DRAM_BANK4 0xa0 /* Control register for DRAM bank #4 */ +#define GG2_PCI_DRAM_BANK5 0xa4 /* Control register for DRAM bank #5 */ +#define GG2_PCI_DRAM_TIME0 0xb0 /* Timing parameters set #0 */ +#define GG2_PCI_DRAM_TIME1 0xb4 /* Timing parameters set #1 */ +#define GG2_PCI_DRAM_CTRL 0xc0 /* DRAM control */ +#define GG2_PCI_ERR_CTRL 0xd0 /* Error control register */ +#define GG2_PCI_ERR_STATUS 0xd4 /* Error status register */ + /* Cleared when read */ + +#endif /* _ASMPPC_GG2_H */ diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c index 28d1647b204..e43465d34d2 100644 --- a/arch/powerpc/platforms/chrp/pci.c +++ b/arch/powerpc/platforms/chrp/pci.c @@ -13,7 +13,6 @@ #include <asm/irq.h> #include <asm/hydra.h> #include <asm/prom.h> -#include <asm/gg2.h> #include <asm/machdep.h> #include <asm/sections.h> #include <asm/pci-bridge.h> @@ -21,6 +20,7 @@ #include <asm/rtas.h> #include "chrp.h" +#include "gg2.h" /* LongTrail */ void __iomem *gg2_pci_config_base; @@ -86,8 +86,8 @@ int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off, static struct pci_ops gg2_pci_ops = { - gg2_read_config, - gg2_write_config + .read = gg2_read_config, + .write = gg2_write_config, }; /* @@ -124,8 +124,8 @@ int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset, static struct pci_ops rtas_pci_ops = { - rtas_read_config, - rtas_write_config + .read = rtas_read_config, + .write = rtas_write_config, }; volatile struct Hydra __iomem *Hydra = NULL; @@ -338,3 +338,32 @@ void chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105, chrp_pci_fixup_winbond_ata); + +/* Pegasos2 firmware version 20040810 configures the built-in IDE controller + * in legacy mode, but sets the PCI registers to PCI native mode. + * The chip can only operate in legacy mode, so force the PCI class into legacy + * mode as well. The same fixup must be done to the class-code property in + * the IDE node /pci@80000000/ide@C,1 + */ +static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide) +{ + u8 progif; + struct pci_dev *viaisa; + + if (!machine_is(chrp) || _chrp_type != _CHRP_Pegasos) + return; + if (viaide->irq != 14) + return; + + viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); + if (!viaisa) + return; + printk("Fixing VIA IDE, force legacy mode on '%s'\n", viaide->dev.bus_id); + + pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif); + pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5); + viaide->class &= ~0x5; + + pci_dev_put(viaisa); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, chrp_pci_fixup_vt8231_ata); diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 373de4c063d..96498ad7b94 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -32,13 +32,11 @@ #include <linux/seq_file.h> #include <linux/root_dev.h> #include <linux/initrd.h> -#include <linux/module.h> #include <linux/timer.h> #include <asm/io.h> #include <asm/pgtable.h> #include <asm/prom.h> -#include <asm/gg2.h> #include <asm/pci-bridge.h> #include <asm/dma.h> #include <asm/machdep.h> @@ -52,6 +50,7 @@ #include <asm/xmon.h> #include "chrp.h" +#include "gg2.h" void rtas_indicator_progress(char *, unsigned short); diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index 3ea0eb78568..10a4a4d063b 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -26,10 +26,8 @@ #include <asm/io.h> #include <asm/prom.h> #include <asm/smp.h> -#include <asm/residual.h> #include <asm/time.h> #include <asm/machdep.h> -#include <asm/smp.h> #include <asm/mpic.h> #include <asm/rtas.h> diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c index 6292e36dc57..b6de2b5223d 100644 --- a/arch/powerpc/platforms/embedded6xx/holly.c +++ b/arch/powerpc/platforms/embedded6xx/holly.c @@ -113,23 +113,11 @@ static void holly_remap_bridge(void) static void __init holly_setup_arch(void) { - struct device_node *cpu; struct device_node *np; if (ppc_md.progress) ppc_md.progress("holly_setup_arch():set_bridge", 0); - cpu = of_find_node_by_type(NULL, "cpu"); - if (cpu) { - const unsigned int *fp; - - fp = of_get_property(cpu, "clock-frequency", NULL); - if (fp) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(cpu); - } tsi108_csr_vir_base = get_vir_csrbase(); /* setup PCI host bridge */ @@ -147,7 +135,7 @@ static void __init holly_setup_arch(void) } /* - * Interrupt setup and service. Interrrupts on the holly come + * Interrupt setup and service. Interrupts on the holly come * from the four external INT pins, PCI interrupts are routed via * PCI interrupt control registers, it generates internal IRQ23 * diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index bd5ca58345a..61ca02c2d64 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -18,9 +18,10 @@ #include <asm/time.h> #include <asm/prom.h> #include <asm/mpic.h> -#include <asm/mpc10x.h> #include <asm/pci-bridge.h> +#include "mpc10x.h" + static struct mtd_partition linkstation_physmap_partitions[] = { { .name = "mtd_firmimg", @@ -99,7 +100,7 @@ static void __init linkstation_setup_arch(void) } /* - * Interrupt setup and service. Interrrupts on the linkstation come + * Interrupt setup and service. Interrupts on the linkstation come * from the four PCI slots plus onboard 8241 devices: I2C, DUART. */ static void __init linkstation_init_IRQ(void) diff --git a/arch/powerpc/platforms/embedded6xx/ls_uart.c b/arch/powerpc/platforms/embedded6xx/ls_uart.c index d0bee9f19e4..0d9f1500a67 100644 --- a/arch/powerpc/platforms/embedded6xx/ls_uart.c +++ b/arch/powerpc/platforms/embedded6xx/ls_uart.c @@ -4,11 +4,11 @@ #include <linux/serial_reg.h> #include <linux/serial_8250.h> #include <asm/io.h> -#include <asm/mpc10x.h> -#include <asm/ppc_sys.h> #include <asm/prom.h> #include <asm/termbits.h> +#include "mpc10x.h" + static void __iomem *avr_addr; static unsigned long avr_clock; diff --git a/arch/powerpc/platforms/embedded6xx/mpc10x.h b/arch/powerpc/platforms/embedded6xx/mpc10x.h new file mode 100644 index 00000000000..b30a6a3b5bd --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/mpc10x.h @@ -0,0 +1,180 @@ +/* + * Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem + * ctlr/EPIC/etc. + * + * Author: Mark A. Greer + * mgreer@mvista.com + * + * 2001 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __PPC_KERNEL_MPC10X_H +#define __PPC_KERNEL_MPC10X_H + +#include <linux/pci_ids.h> +#include <asm/pci-bridge.h> + +/* + * The values here don't completely map everything but should work in most + * cases. + * + * MAP A (PReP Map) + * Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff + * Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff + * PCI MEM: 0x80000000 -> Processor System Memory: 0x00000000 + * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB) + * + * MAP B (CHRP Map) + * Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff + * Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff + * PCI MEM: 0x00000000 -> Processor System Memory: 0x00000000 + * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB) + */ + +/* + * Define the vendor/device IDs for the various bridges--should be added to + * <linux/pci_ids.h> + */ +#define MPC10X_BRIDGE_106 ((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) | \ + PCI_VENDOR_ID_MOTOROLA) +#define MPC10X_BRIDGE_8240 ((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA) +#define MPC10X_BRIDGE_107 ((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA) +#define MPC10X_BRIDGE_8245 ((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA) + +/* Define the type of map to use */ +#define MPC10X_MEM_MAP_A 1 +#define MPC10X_MEM_MAP_B 2 + +/* Map A (PReP Map) Defines */ +#define MPC10X_MAPA_CNFG_ADDR 0x80000cf8 +#define MPC10X_MAPA_CNFG_DATA 0x80000cfc + +#define MPC10X_MAPA_ISA_IO_BASE 0x80000000 +#define MPC10X_MAPA_ISA_MEM_BASE 0xc0000000 +#define MPC10X_MAPA_DRAM_OFFSET 0x80000000 + +#define MPC10X_MAPA_PCI_INTACK_ADDR 0xbffffff0 +#define MPC10X_MAPA_PCI_IO_START 0x00000000 +#define MPC10X_MAPA_PCI_IO_END (0x00800000 - 1) +#define MPC10X_MAPA_PCI_MEM_START 0x00000000 +#define MPC10X_MAPA_PCI_MEM_END (0x20000000 - 1) + +#define MPC10X_MAPA_PCI_MEM_OFFSET (MPC10X_MAPA_ISA_MEM_BASE - \ + MPC10X_MAPA_PCI_MEM_START) + +/* Map B (CHRP Map) Defines */ +#define MPC10X_MAPB_CNFG_ADDR 0xfec00000 +#define MPC10X_MAPB_CNFG_DATA 0xfee00000 + +#define MPC10X_MAPB_ISA_IO_BASE 0xfe000000 +#define MPC10X_MAPB_ISA_MEM_BASE 0x80000000 +#define MPC10X_MAPB_DRAM_OFFSET 0x00000000 + +#define MPC10X_MAPB_PCI_INTACK_ADDR 0xfef00000 +#define MPC10X_MAPB_PCI_IO_START 0x00000000 +#define MPC10X_MAPB_PCI_IO_END (0x00c00000 - 1) +#define MPC10X_MAPB_PCI_MEM_START 0x80000000 +#define MPC10X_MAPB_PCI_MEM_END (0xc0000000 - 1) + +#define MPC10X_MAPB_PCI_MEM_OFFSET (MPC10X_MAPB_ISA_MEM_BASE - \ + MPC10X_MAPB_PCI_MEM_START) + +/* Set hose members to values appropriate for the mem map used */ +#define MPC10X_SETUP_HOSE(hose, map) { \ + (hose)->pci_mem_offset = MPC10X_MAP##map##_PCI_MEM_OFFSET; \ + (hose)->io_space.start = MPC10X_MAP##map##_PCI_IO_START; \ + (hose)->io_space.end = MPC10X_MAP##map##_PCI_IO_END; \ + (hose)->mem_space.start = MPC10X_MAP##map##_PCI_MEM_START; \ + (hose)->mem_space.end = MPC10X_MAP##map##_PCI_MEM_END; \ + (hose)->io_base_virt = (void *)MPC10X_MAP##map##_ISA_IO_BASE; \ +} + + +/* Miscellaneous Configuration register offsets */ +#define MPC10X_CFG_PIR_REG 0x09 +#define MPC10X_CFG_PIR_HOST_BRIDGE 0x00 +#define MPC10X_CFG_PIR_AGENT 0x01 + +#define MPC10X_CFG_EUMBBAR 0x78 + +#define MPC10X_CFG_PICR1_REG 0xa8 +#define MPC10X_CFG_PICR1_ADDR_MAP_MASK 0x00010000 +#define MPC10X_CFG_PICR1_ADDR_MAP_A 0x00010000 +#define MPC10X_CFG_PICR1_ADDR_MAP_B 0x00000000 +#define MPC10X_CFG_PICR1_SPEC_PCI_RD 0x00000004 +#define MPC10X_CFG_PICR1_ST_GATH_EN 0x00000040 + +#define MPC10X_CFG_PICR2_REG 0xac +#define MPC10X_CFG_PICR2_COPYBACK_OPT 0x00000001 + +#define MPC10X_CFG_MAPB_OPTIONS_REG 0xe0 +#define MPC10X_CFG_MAPB_OPTIONS_CFAE 0x80 /* CPU_FD_ALIAS_EN */ +#define MPC10X_CFG_MAPB_OPTIONS_PFAE 0x40 /* PCI_FD_ALIAS_EN */ +#define MPC10X_CFG_MAPB_OPTIONS_DR 0x20 /* DLL_RESET */ +#define MPC10X_CFG_MAPB_OPTIONS_PCICH 0x08 /* PCI_COMPATIBILITY_HOLE */ +#define MPC10X_CFG_MAPB_OPTIONS_PROCCH 0x04 /* PROC_COMPATIBILITY_HOLE */ + +/* Define offsets for the memory controller registers in the config space */ +#define MPC10X_MCTLR_MEM_START_1 0x80 /* Banks 0-3 */ +#define MPC10X_MCTLR_MEM_START_2 0x84 /* Banks 4-7 */ +#define MPC10X_MCTLR_EXT_MEM_START_1 0x88 /* Banks 0-3 */ +#define MPC10X_MCTLR_EXT_MEM_START_2 0x8c /* Banks 4-7 */ + +#define MPC10X_MCTLR_MEM_END_1 0x90 /* Banks 0-3 */ +#define MPC10X_MCTLR_MEM_END_2 0x94 /* Banks 4-7 */ +#define MPC10X_MCTLR_EXT_MEM_END_1 0x98 /* Banks 0-3 */ +#define MPC10X_MCTLR_EXT_MEM_END_2 0x9c /* Banks 4-7 */ + +#define MPC10X_MCTLR_MEM_BANK_ENABLES 0xa0 + +/* Define some offset in the EUMB */ +#define MPC10X_EUMB_SIZE 0x00100000 /* Total EUMB size (1MB) */ + +#define MPC10X_EUMB_MU_OFFSET 0x00000000 /* Msg Unit reg offset */ +#define MPC10X_EUMB_MU_SIZE 0x00001000 /* Msg Unit reg size */ +#define MPC10X_EUMB_DMA_OFFSET 0x00001000 /* DMA Unit reg offset */ +#define MPC10X_EUMB_DMA_SIZE 0x00001000 /* DMA Unit reg size */ +#define MPC10X_EUMB_ATU_OFFSET 0x00002000 /* Addr xlate reg offset */ +#define MPC10X_EUMB_ATU_SIZE 0x00001000 /* Addr xlate reg size */ +#define MPC10X_EUMB_I2C_OFFSET 0x00003000 /* I2C Unit reg offset */ +#define MPC10X_EUMB_I2C_SIZE 0x00001000 /* I2C Unit reg size */ +#define MPC10X_EUMB_DUART_OFFSET 0x00004000 /* DUART Unit reg offset (8245) */ +#define MPC10X_EUMB_DUART_SIZE 0x00001000 /* DUART Unit reg size (8245) */ +#define MPC10X_EUMB_EPIC_OFFSET 0x00040000 /* EPIC offset in EUMB */ +#define MPC10X_EUMB_EPIC_SIZE 0x00030000 /* EPIC size */ +#define MPC10X_EUMB_PM_OFFSET 0x000fe000 /* Performance Monitor reg offset (8245) */ +#define MPC10X_EUMB_PM_SIZE 0x00001000 /* Performance Monitor reg size (8245) */ +#define MPC10X_EUMB_WP_OFFSET 0x000ff000 /* Data path diagnostic, watchpoint reg offset */ +#define MPC10X_EUMB_WP_SIZE 0x00001000 /* Data path diagnostic, watchpoint reg size */ + +/* + * Define some recommended places to put the EUMB regs. + * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff. + */ +extern unsigned long ioremap_base; +#define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE) +#define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE + +enum ppc_sys_devices { + MPC10X_IIC1, + MPC10X_DMA0, + MPC10X_DMA1, + MPC10X_UART0, + MPC10X_UART1, + NUM_PPC_SYS_DEVS, +}; + +int mpc10x_bridge_init(struct pci_controller *hose, + uint current_map, + uint new_map, + uint phys_eumb_base); +unsigned long mpc10x_get_mem_size(uint mem_map); +int mpc10x_enable_store_gathering(struct pci_controller *hose); +int mpc10x_disable_store_gathering(struct pci_controller *hose); + +/* For MPC107 boards that use the built-in openpic */ +void mpc10x_set_openpic(void); + +#endif /* __PPC_KERNEL_MPC10X_H */ diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index 1e3cc69487b..96737e5608d 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -40,7 +40,6 @@ #include <asm/pci-bridge.h> #include <asm/reg.h> #include <mm/mmu_decl.h> -#include "mpc7448_hpc2.h" #include <asm/tsi108_pci.h> #include <asm/tsi108_irq.h> #include <asm/mpic.h> @@ -91,7 +90,7 @@ static void __init mpc7448_hpc2_setup_arch(void) } /* - * Interrupt setup and service. Interrrupts on the mpc7448_hpc2 come + * Interrupt setup and service. Interrupts on the mpc7448_hpc2 come * from the four external INT pins, PCI interrupts are routed via * PCI interrupt control registers, it generates internal IRQ23 * diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h deleted file mode 100644 index f7e0e0c7f8d..00000000000 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * mpc7448_hpc2.h - * - * Definitions for Freescale MPC7448_HPC2 platform - * - * Author: Jacob Pan - * jacob.pan@freescale.com - * Maintainer: Roy Zang <roy.zang@freescale.com> - * - * 2006 (c) Freescale Semiconductor, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __PPC_PLATFORMS_MPC7448_HPC2_H -#define __PPC_PLATFORMS_MPC7448_HPC2_H - -#include <asm/ppcboot.h> - -#endif /* __PPC_PLATFORMS_MPC7448_HPC2_H */ diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c index 53420951dc5..54675648d6d 100644 --- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c +++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c @@ -44,7 +44,6 @@ static void __init prpmc2800_setup_arch(void) struct device_node *np; phys_addr_t paddr; const unsigned int *reg; - const unsigned int *prop; /* * ioremap mpp and gpp registers in case they are later @@ -62,12 +61,6 @@ static void __init prpmc2800_setup_arch(void) of_node_put(np); mv64x60_gpp_reg_base = ioremap(paddr, reg[1]); - np = of_find_node_by_type(NULL, "cpu"); - prop = of_get_property(np, "clock-frequency", NULL); - if (prop) - loops_per_jiffy = *prop / HZ; - of_node_put(np); - #ifdef CONFIG_PCI mv64x60_pci_init(); #endif diff --git a/arch/powerpc/platforms/iseries/Makefile b/arch/powerpc/platforms/iseries/Makefile index 13ac3015d91..60db509638f 100644 --- a/arch/powerpc/platforms/iseries/Makefile +++ b/arch/powerpc/platforms/iseries/Makefile @@ -2,6 +2,7 @@ EXTRA_CFLAGS += -mno-minimal-toc extra-y += dt.o +obj-y += exception.o obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt_mod.o mf.o lpevents.o \ hvcall.o proc.o htab.o iommu.o misc.o irq.o obj-$(CONFIG_PCI) += pci.o vpdinfo.o diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S new file mode 100644 index 00000000000..5381038f088 --- /dev/null +++ b/arch/powerpc/platforms/iseries/exception.S @@ -0,0 +1,251 @@ +/* + * Low level routines for legacy iSeries support. + * + * Extracted from head_64.S + * + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP + * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> + * Adapted for Power Macintosh by Paul Mackerras. + * Low-level exception handlers and MMU support + * rewritten by Paul Mackerras. + * Copyright (C) 1996 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com + * + * This file contains the low-level support and setup for the + * PowerPC-64 platform, including trap and interrupt dispatch. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/reg.h> +#include <asm/ppc_asm.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/ptrace.h> +#include <asm/cputable.h> + +#include "exception.h" + + .text + + .globl system_reset_iSeries +system_reset_iSeries: + mfspr r13,SPRN_SPRG3 /* Get paca address */ + mfmsr r24 + ori r24,r24,MSR_RI + mtmsrd r24 /* RI on */ + lhz r24,PACAPACAINDEX(r13) /* Get processor # */ + cmpwi 0,r24,0 /* Are we processor 0? */ + bne 1f + b .__start_initialization_iSeries /* Start up the first processor */ +1: mfspr r4,SPRN_CTRLF + li r5,CTRL_RUNLATCH /* Turn off the run light */ + andc r4,r4,r5 + mtspr SPRN_CTRLT,r4 + +1: + HMT_LOW +#ifdef CONFIG_SMP + lbz r23,PACAPROCSTART(r13) /* Test if this processor + * should start */ + sync + LOAD_REG_IMMEDIATE(r3,current_set) + sldi r28,r24,3 /* get current_set[cpu#] */ + ldx r3,r3,r28 + addi r1,r3,THREAD_SIZE + subi r1,r1,STACK_FRAME_OVERHEAD + + cmpwi 0,r23,0 + beq iSeries_secondary_smp_loop /* Loop until told to go */ + b __secondary_start /* Loop until told to go */ +iSeries_secondary_smp_loop: + /* Let the Hypervisor know we are alive */ + /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */ + lis r3,0x8002 + rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */ +#else /* CONFIG_SMP */ + /* Yield the processor. This is required for non-SMP kernels + which are running on multi-threaded machines. */ + lis r3,0x8000 + rldicr r3,r3,32,15 /* r3 = (r3 << 32) & 0xffff000000000000 */ + addi r3,r3,18 /* r3 = 0x8000000000000012 which is "yield" */ + li r4,0 /* "yield timed" */ + li r5,-1 /* "yield forever" */ +#endif /* CONFIG_SMP */ + li r0,-1 /* r0=-1 indicates a Hypervisor call */ + sc /* Invoke the hypervisor via a system call */ + mfspr r13,SPRN_SPRG3 /* Put r13 back ???? */ + b 1b /* If SMP not configured, secondaries + * loop forever */ + +/*** ISeries-LPAR interrupt handlers ***/ + + STD_EXCEPTION_ISERIES(machine_check, PACA_EXMC) + + .globl data_access_iSeries +data_access_iSeries: + mtspr SPRN_SPRG1,r13 +BEGIN_FTR_SECTION + mtspr SPRN_SPRG2,r12 + mfspr r13,SPRN_DAR + mfspr r12,SPRN_DSISR + srdi r13,r13,60 + rlwimi r13,r12,16,0x20 + mfcr r12 + cmpwi r13,0x2c + beq .do_stab_bolted_iSeries + mtcrf 0x80,r12 + mfspr r12,SPRN_SPRG2 +END_FTR_SECTION_IFCLR(CPU_FTR_SLB) + EXCEPTION_PROLOG_1(PACA_EXGEN) + EXCEPTION_PROLOG_ISERIES_1 + b data_access_common + +.do_stab_bolted_iSeries: + mtcrf 0x80,r12 + mfspr r12,SPRN_SPRG2 + EXCEPTION_PROLOG_1(PACA_EXSLB) + EXCEPTION_PROLOG_ISERIES_1 + b .do_stab_bolted + + .globl data_access_slb_iSeries +data_access_slb_iSeries: + mtspr SPRN_SPRG1,r13 /* save r13 */ + mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + std r3,PACA_EXSLB+EX_R3(r13) + mfspr r3,SPRN_DAR + std r9,PACA_EXSLB+EX_R9(r13) + mfcr r9 +#ifdef __DISABLED__ + cmpdi r3,0 + bge slb_miss_user_iseries +#endif + std r10,PACA_EXSLB+EX_R10(r13) + std r11,PACA_EXSLB+EX_R11(r13) + std r12,PACA_EXSLB+EX_R12(r13) + mfspr r10,SPRN_SPRG1 + std r10,PACA_EXSLB+EX_R13(r13) + ld r12,PACALPPACAPTR(r13) + ld r12,LPPACASRR1(r12) + b .slb_miss_realmode + + STD_EXCEPTION_ISERIES(instruction_access, PACA_EXGEN) + + .globl instruction_access_slb_iSeries +instruction_access_slb_iSeries: + mtspr SPRN_SPRG1,r13 /* save r13 */ + mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ + std r3,PACA_EXSLB+EX_R3(r13) + ld r3,PACALPPACAPTR(r13) + ld r3,LPPACASRR0(r3) /* get SRR0 value */ + std r9,PACA_EXSLB+EX_R9(r13) + mfcr r9 +#ifdef __DISABLED__ + cmpdi r3,0 + bge slb_miss_user_iseries +#endif + std r10,PACA_EXSLB+EX_R10(r13) + std r11,PACA_EXSLB+EX_R11(r13) + std r12,PACA_EXSLB+EX_R12(r13) + mfspr r10,SPRN_SPRG1 + std r10,PACA_EXSLB+EX_R13(r13) + ld r12,PACALPPACAPTR(r13) + ld r12,LPPACASRR1(r12) + b .slb_miss_realmode + +#ifdef __DISABLED__ +slb_miss_user_iseries: + std r10,PACA_EXGEN+EX_R10(r13) + std r11,PACA_EXGEN+EX_R11(r13) + std r12,PACA_EXGEN+EX_R12(r13) + mfspr r10,SPRG1 + ld r11,PACA_EXSLB+EX_R9(r13) + ld r12,PACA_EXSLB+EX_R3(r13) + std r10,PACA_EXGEN+EX_R13(r13) + std r11,PACA_EXGEN+EX_R9(r13) + std r12,PACA_EXGEN+EX_R3(r13) + EXCEPTION_PROLOG_ISERIES_1 + b slb_miss_user_common +#endif + + MASKABLE_EXCEPTION_ISERIES(hardware_interrupt) + STD_EXCEPTION_ISERIES(alignment, PACA_EXGEN) + STD_EXCEPTION_ISERIES(program_check, PACA_EXGEN) + STD_EXCEPTION_ISERIES(fp_unavailable, PACA_EXGEN) + MASKABLE_EXCEPTION_ISERIES(decrementer) + STD_EXCEPTION_ISERIES(trap_0a, PACA_EXGEN) + STD_EXCEPTION_ISERIES(trap_0b, PACA_EXGEN) + + .globl system_call_iSeries +system_call_iSeries: + mr r9,r13 + mfspr r13,SPRN_SPRG3 + EXCEPTION_PROLOG_ISERIES_1 + b system_call_common + + STD_EXCEPTION_ISERIES(single_step, PACA_EXGEN) + STD_EXCEPTION_ISERIES(trap_0e, PACA_EXGEN) + STD_EXCEPTION_ISERIES(performance_monitor, PACA_EXGEN) + +decrementer_iSeries_masked: + /* We may not have a valid TOC pointer in here. */ + li r11,1 + ld r12,PACALPPACAPTR(r13) + stb r11,LPPACADECRINT(r12) + LOAD_REG_IMMEDIATE(r12, tb_ticks_per_jiffy) + lwz r12,0(r12) + mtspr SPRN_DEC,r12 + /* fall through */ + +hardware_interrupt_iSeries_masked: + mtcrf 0x80,r9 /* Restore regs */ + ld r12,PACALPPACAPTR(r13) + ld r11,LPPACASRR0(r12) + ld r12,LPPACASRR1(r12) + mtspr SPRN_SRR0,r11 + mtspr SPRN_SRR1,r12 + ld r9,PACA_EXGEN+EX_R9(r13) + ld r10,PACA_EXGEN+EX_R10(r13) + ld r11,PACA_EXGEN+EX_R11(r13) + ld r12,PACA_EXGEN+EX_R12(r13) + ld r13,PACA_EXGEN+EX_R13(r13) + rfid + b . /* prevent speculative execution */ + +_INIT_STATIC(__start_initialization_iSeries) + /* Clear out the BSS */ + LOAD_REG_IMMEDIATE(r11,__bss_stop) + LOAD_REG_IMMEDIATE(r8,__bss_start) + sub r11,r11,r8 /* bss size */ + addi r11,r11,7 /* round up to an even double word */ + rldicl. r11,r11,61,3 /* shift right by 3 */ + beq 4f + addi r8,r8,-8 + li r0,0 + mtctr r11 /* zero this many doublewords */ +3: stdu r0,8(r8) + bdnz 3b +4: + LOAD_REG_IMMEDIATE(r1,init_thread_union) + addi r1,r1,THREAD_SIZE + li r0,0 + stdu r0,-STACK_FRAME_OVERHEAD(r1) + + LOAD_REG_IMMEDIATE(r2,__toc_start) + addi r2,r2,0x4000 + addi r2,r2,0x4000 + + bl .iSeries_early_setup + bl .early_setup + + /* relocation is on at this point */ + + b .start_here_common diff --git a/arch/powerpc/platforms/iseries/exception.h b/arch/powerpc/platforms/iseries/exception.h new file mode 100644 index 00000000000..ced45a8fa1a --- /dev/null +++ b/arch/powerpc/platforms/iseries/exception.h @@ -0,0 +1,58 @@ +#ifndef _ASM_POWERPC_ISERIES_EXCEPTION_H +#define _ASM_POWERPC_ISERIES_EXCEPTION_H +/* + * Extracted from head_64.S + * + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP + * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> + * Adapted for Power Macintosh by Paul Mackerras. + * Low-level exception handlers and MMU support + * rewritten by Paul Mackerras. + * Copyright (C) 1996 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com + * + * This file contains the low-level support and setup for the + * PowerPC-64 platform, including trap and interrupt dispatch. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <asm/exception.h> + +#define EXCEPTION_PROLOG_ISERIES_1 \ + mfmsr r10; \ + ld r12,PACALPPACAPTR(r13); \ + ld r11,LPPACASRR0(r12); \ + ld r12,LPPACASRR1(r12); \ + ori r10,r10,MSR_RI; \ + mtmsrd r10,1 + +#define STD_EXCEPTION_ISERIES(label, area) \ + .globl label##_iSeries; \ +label##_iSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + EXCEPTION_PROLOG_1(area); \ + EXCEPTION_PROLOG_ISERIES_1; \ + b label##_common + +#define MASKABLE_EXCEPTION_ISERIES(label) \ + .globl label##_iSeries; \ +label##_iSeries: \ + HMT_MEDIUM; \ + mtspr SPRN_SPRG1,r13; /* save r13 */ \ + EXCEPTION_PROLOG_1(PACA_EXGEN); \ + lbz r10,PACASOFTIRQEN(r13); \ + cmpwi 0,r10,0; \ + beq- label##_iSeries_masked; \ + EXCEPTION_PROLOG_ISERIES_1; \ + b label##_common; \ + +#endif /* _ASM_POWERPC_ISERIES_EXCEPTION_H */ diff --git a/arch/powerpc/platforms/iseries/it_lp_naca.h b/arch/powerpc/platforms/iseries/it_lp_naca.h index 9bbf5898681..cf6dcf6ef07 100644 --- a/arch/powerpc/platforms/iseries/it_lp_naca.h +++ b/arch/powerpc/platforms/iseries/it_lp_naca.h @@ -60,7 +60,7 @@ struct ItLpNaca { u8 xRsvd2_0[128]; // Reserved x00-x7F // CACHE_LINE_3-6 0x0100 - 0x02FF Contains LP Queue indicators -// NB: Padding required to keep xInterrruptHdlr at x300 which is required +// NB: Padding required to keep xInterruptHdlr at x300 which is required // for v4r4 PLIC. u8 xOldLpQueue[128]; // LP Queue needed for v4r4 100-17F u8 xRsvd3_0[384]; // Reserved 180-2FF diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 13a8b1908de..fad493e29d3 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -41,7 +41,6 @@ #include <asm/time.h> #include <asm/paca.h> #include <asm/cache.h> -#include <asm/sections.h> #include <asm/abs_addr.h> #include <asm/iseries/hv_lp_config.h> #include <asm/iseries/hv_call_event.h> diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 2542403288f..771ed0cf29a 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -169,15 +169,12 @@ static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, switch (len) { case 1: out_8(addr, val); - (void) in_8(addr); break; case 2: out_le16(addr, val); - (void) in_le16(addr); break; default: out_le32(addr, val); - (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -185,8 +182,8 @@ static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, static struct pci_ops u3_agp_pci_ops = { - u3_agp_read_config, - u3_agp_write_config + .read = u3_agp_read_config, + .write = u3_agp_write_config, }; static unsigned long u3_ht_cfa0(u8 devfn, u8 off) @@ -268,15 +265,12 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, switch (len) { case 1: out_8(addr, val); - (void) in_8(addr); break; case 2: out_le16(addr, val); - (void) in_le16(addr); break; default: out_le32(addr, val); - (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -284,8 +278,8 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, static struct pci_ops u3_ht_pci_ops = { - u3_ht_read_config, - u3_ht_write_config + .read = u3_ht_read_config, + .write = u3_ht_write_config, }; static unsigned int u4_pcie_cfa0(unsigned int devfn, unsigned int off) @@ -376,15 +370,12 @@ static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn, switch (len) { case 1: out_8(addr, val); - (void) in_8(addr); break; case 2: out_le16(addr, val); - (void) in_le16(addr); break; default: out_le32(addr, val); - (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -392,8 +383,8 @@ static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn, static struct pci_ops u4_pcie_pci_ops = { - u4_pcie_read_config, - u4_pcie_write_config + .read = u4_pcie_read_config, + .write = u4_pcie_write_config, }; static void __init setup_u3_agp(struct pci_controller* hose) diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c index 9014d55c717..6c42787fb38 100644 --- a/arch/powerpc/platforms/pasemi/iommu.c +++ b/arch/powerpc/platforms/pasemi/iommu.c @@ -187,7 +187,7 @@ static void pci_dma_dev_setup_pasemi(struct pci_dev *dev) static void pci_dma_bus_setup_null(struct pci_bus *b) { } static void pci_dma_dev_setup_null(struct pci_dev *d) { } -int iob_init(struct device_node *dn) +int __init iob_init(struct device_node *dn) { unsigned long tmp; u32 regword; @@ -233,7 +233,7 @@ int iob_init(struct device_node *dn) /* These are called very early. */ -void iommu_init_early_pasemi(void) +void __init iommu_init_early_pasemi(void) { int iommu_off; diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c index ab1f5f62bcd..03d1d07aa2a 100644 --- a/arch/powerpc/platforms/pasemi/pci.c +++ b/arch/powerpc/platforms/pasemi/pci.c @@ -107,23 +107,20 @@ static int pa_pxp_write_config(struct pci_bus *bus, unsigned int devfn, switch (len) { case 1: out_8(addr, val); - (void) in_8(addr); break; case 2: out_le16(addr, val); - (void) in_le16(addr); break; default: out_le32(addr, val); - (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; } static struct pci_ops pa_pxp_ops = { - pa_pxp_read_config, - pa_pxp_write_config, + .read = pa_pxp_read_config, + .write = pa_pxp_write_config, }; static void __init setup_pa_pxp(struct pci_controller *hose) diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index ffe6528048b..05def6282f8 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -50,26 +50,30 @@ static void pas_restart(char *cmd) #ifdef CONFIG_SMP static DEFINE_SPINLOCK(timebase_lock); +static unsigned long timebase; static void __devinit pas_give_timebase(void) { - unsigned long tb; - spin_lock(&timebase_lock); mtspr(SPRN_TBCTL, TBCTL_FREEZE); - tb = mftb(); - mtspr(SPRN_TBCTL, TBCTL_UPDATE_LOWER | (tb & 0xffffffff)); - mtspr(SPRN_TBCTL, TBCTL_UPDATE_UPPER | (tb >> 32)); - mtspr(SPRN_TBCTL, TBCTL_RESTART); + isync(); + timebase = get_tb(); spin_unlock(&timebase_lock); - pr_debug("pas_give_timebase: cpu %d gave tb %lx\n", - smp_processor_id(), tb); + + while (timebase) + barrier(); + mtspr(SPRN_TBCTL, TBCTL_RESTART); } static void __devinit pas_take_timebase(void) { - pr_debug("pas_take_timebase: cpu %d has tb %lx\n", - smp_processor_id(), mftb()); + while (!timebase) + smp_rmb(); + + spin_lock(&timebase_lock); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + spin_unlock(&timebase_lock); } struct smp_ops_t pas_smp_ops = { diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c index 9d73d0234c5..cf660916ae0 100644 --- a/arch/powerpc/platforms/powermac/bootx_init.c +++ b/arch/powerpc/platforms/powermac/bootx_init.c @@ -17,7 +17,6 @@ #include <asm/prom.h> #include <asm/page.h> #include <asm/bootx.h> -#include <asm/bootinfo.h> #include <asm/btext.h> #include <asm/io.h> diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index efdf5eb81ec..da2007e3db0 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -40,7 +40,6 @@ #include <linux/completion.h> #include <linux/platform_device.h> #include <linux/interrupt.h> -#include <linux/completion.h> #include <linux/timer.h> #include <linux/mutex.h> #include <asm/keylargo.h> diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 92586db1975..ec49099830d 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -209,15 +209,12 @@ static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn, switch (len) { case 1: out_8(addr, val); - (void) in_8(addr); break; case 2: out_le16(addr, val); - (void) in_le16(addr); break; default: out_le32(addr, val); - (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -225,8 +222,8 @@ static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn, static struct pci_ops macrisc_pci_ops = { - macrisc_read_config, - macrisc_write_config + .read = macrisc_read_config, + .write = macrisc_write_config, }; #ifdef CONFIG_PPC32 @@ -280,8 +277,8 @@ chaos_write_config(struct pci_bus *bus, unsigned int devfn, int offset, static struct pci_ops chaos_pci_ops = { - chaos_read_config, - chaos_write_config + .read = chaos_read_config, + .write = chaos_write_config, }; static void __init setup_chaos(struct pci_controller *hose, @@ -440,15 +437,12 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, switch (len) { case 1: out_8(addr, val); - (void) in_8(addr); break; case 2: out_le16(addr, val); - (void) in_le16(addr); break; default: out_le32((u32 __iomem *)addr, val); - (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -456,8 +450,8 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, static struct pci_ops u3_ht_pci_ops = { - u3_ht_read_config, - u3_ht_write_config + .read = u3_ht_read_config, + .write = u3_ht_write_config, }; #define U4_PCIE_CFA0(devfn, off) \ @@ -545,15 +539,12 @@ static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn, switch (len) { case 1: out_8(addr, val); - (void) in_8(addr); break; case 2: out_le16(addr, val); - (void) in_le16(addr); break; default: out_le32(addr, val); - (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; @@ -561,8 +552,8 @@ static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn, static struct pci_ops u4_pcie_pci_ops = { - u4_pcie_read_config, - u4_pcie_write_config + .read = u4_pcie_read_config, + .write = u4_pcie_write_config, }; #endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h index 6e090a7dea8..fcde070f705 100644 --- a/arch/powerpc/platforms/powermac/pmac.h +++ b/arch/powerpc/platforms/powermac/pmac.h @@ -22,9 +22,6 @@ extern void pmac_read_rtc_time(void); extern void pmac_calibrate_decr(void); extern void pmac_pci_irq_fixup(struct pci_dev *); extern void pmac_pci_init(void); -extern unsigned long pmac_ide_get_base(int index); -extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, - unsigned long data_port, unsigned long ctrl_port, int *irq); extern void pmac_nvram_update(void); extern unsigned char pmac_nvram_read_byte(int addr); @@ -33,7 +30,6 @@ extern int pmac_pci_enable_device_hook(struct pci_dev *dev, int initial); extern void pmac_pcibios_after_init(void); extern int of_show_percpuinfo(struct seq_file *m, int i); -extern void pmac_pci_init(void); extern void pmac_setup_pci_dma(void); extern void pmac_check_ht_link(void); diff --git a/arch/powerpc/platforms/powermac/udbg_adb.c b/arch/powerpc/platforms/powermac/udbg_adb.c index 6124e59e103..44e0b55a2a0 100644 --- a/arch/powerpc/platforms/powermac/udbg_adb.c +++ b/arch/powerpc/platforms/powermac/udbg_adb.c @@ -12,7 +12,6 @@ #include <asm/xmon.h> #include <asm/prom.h> #include <asm/bootx.h> -#include <asm/machdep.h> #include <asm/errno.h> #include <asm/pmac_feature.h> #include <asm/processor.h> @@ -150,7 +149,7 @@ static void udbg_adb_putc(char c) return udbg_adb_old_putc(c); } -void udbg_adb_init_early(void) +void __init udbg_adb_init_early(void) { #ifdef CONFIG_BOOTX_TEXT if (btext_find_display(1) == 0) { @@ -160,7 +159,7 @@ void udbg_adb_init_early(void) #endif } -int udbg_adb_init(int force_btext) +int __init udbg_adb_init(int force_btext) { struct device_node *np; diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index b8770395013..b242c6c34f8 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -169,6 +169,8 @@ static void rtas_slot_error_detail(struct pci_dn *pdn, int severity, */ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) { + struct device_node *dn; + struct pci_dev *dev = pdn->pcidev; u32 cfg; int cap, i; int n = 0; @@ -184,6 +186,17 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg); printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg); + /* Gather bridge-specific registers */ + if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) { + rtas_read_config(pdn, PCI_SEC_STATUS, 2, &cfg); + n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg); + printk(KERN_WARNING "EEH: Bridge secondary status: %04x\n", cfg); + + rtas_read_config(pdn, PCI_BRIDGE_CONTROL, 2, &cfg); + n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg); + printk(KERN_WARNING "EEH: Bridge control: %04x\n", cfg); + } + /* Dump out the PCI-X command and status regs */ cap = pci_find_capability(pdn->pcidev, PCI_CAP_ID_PCIX); if (cap) { @@ -209,7 +222,7 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg); } - cap = pci_find_ext_capability(pdn->pcidev,PCI_EXT_CAP_ID_ERR); + cap = pci_find_ext_capability(pdn->pcidev, PCI_EXT_CAP_ID_ERR); if (cap) { n += scnprintf(buf+n, len-n, "pci-e AER:\n"); printk(KERN_WARNING @@ -222,6 +235,18 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) } } } + + /* Gather status on devices under the bridge */ + if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) { + dn = pdn->node->child; + while (dn) { + pdn = PCI_DN(dn); + if (pdn) + n += gather_pci_data(pdn, buf+n, len-n); + dn = dn->sibling; + } + } + return n; } @@ -750,12 +775,12 @@ int rtas_set_slot_reset(struct pci_dn *pdn) return 0; if (rc < 0) { - printk (KERN_ERR "EEH: unrecoverable slot failure %s\n", - pdn->node->full_name); + printk(KERN_ERR "EEH: unrecoverable slot failure %s\n", + pdn->node->full_name); return -1; } - printk (KERN_ERR "EEH: bus reset %d failed on slot %s\n", - i+1, pdn->node->full_name); + printk(KERN_ERR "EEH: bus reset %d failed on slot %s, rc=%d\n", + i+1, pdn->node->full_name, rc); } return -1; @@ -944,23 +969,6 @@ static void *early_enable_eeh(struct device_node *dn, void *data) } pdn->class_code = *class_code; - /* - * Now decide if we are going to "Disable" EEH checking - * for this device. We still run with the EEH hardware active, - * but we won't be checking for ff's. This means a driver - * could return bad data (very bad!), an interrupt handler could - * hang waiting on status bits that won't change, etc. - * But there are a few cases like display devices that make sense. - */ - enable = 1; /* i.e. we will do checking */ -#if 0 - if ((*class_code >> 16) == PCI_BASE_CLASS_DISPLAY) - enable = 0; -#endif - - if (!enable) - pdn->eeh_mode |= EEH_MODE_NOCHECK; - /* Ok... see if this device supports EEH. Some do, some don't, * and the only way to find out is to check each and every one. */ regs = of_get_property(dn, "reg", NULL); diff --git a/arch/powerpc/platforms/pseries/eeh_cache.c b/arch/powerpc/platforms/pseries/eeh_cache.c index e49c815eae2..1e83fcd0df3 100644 --- a/arch/powerpc/platforms/pseries/eeh_cache.c +++ b/arch/powerpc/platforms/pseries/eeh_cache.c @@ -225,6 +225,10 @@ void pci_addr_cache_insert_device(struct pci_dev *dev) { unsigned long flags; + /* Ignore PCI bridges */ + if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) + return; + spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); __pci_addr_cache_insert_device(dev); spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); @@ -285,16 +289,13 @@ void __init pci_addr_cache_build(void) spin_lock_init(&pci_io_addr_cache_root.piar_lock); while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - /* Ignore PCI bridges */ - if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) - continue; pci_addr_cache_insert_device(dev); dn = pci_device_to_OF_node(dev); if (!dn) continue; - pci_dev_get (dev); /* matching put is in eeh_remove_device() */ + pci_dev_get(dev); /* matching put is in eeh_remove_device() */ PCI_DN(dn)->pcidev = dev; eeh_sysfs_add_device(dev); diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 8cc6eeeaae2..ea327ca345c 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -35,7 +35,6 @@ #include <asm/tlbflush.h> #include <asm/tlb.h> #include <asm/prom.h> -#include <asm/abs_addr.h> #include <asm/cputable.h> #include <asm/udbg.h> #include <asm/smp.h> diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c index 9797b10b293..30925d29bce 100644 --- a/arch/powerpc/platforms/pseries/rtasd.c +++ b/arch/powerpc/platforms/pseries/rtasd.c @@ -44,15 +44,19 @@ static unsigned long rtas_log_start; static unsigned long rtas_log_size; static int surveillance_timeout = -1; -static unsigned int rtas_event_scan_rate; static unsigned int rtas_error_log_max; static unsigned int rtas_error_log_buffer_max; +/* RTAS service tokens */ +static unsigned int event_scan; +static unsigned int rtas_event_scan_rate; + static int full_rtas_msgs = 0; -extern int no_logging; +/* Stop logging to nvram after first fatal error */ +static int no_more_logging; -volatile int error_log_cnt = 0; +static int error_log_cnt; /* * Since we use 32 bit RTAS, the physical address of this must be below @@ -61,8 +65,6 @@ volatile int error_log_cnt = 0; */ static unsigned char logdata[RTAS_ERROR_LOG_MAX]; -static int get_eventscan_parms(void); - static char *rtas_type[] = { "Unknown", "Retry", "TCE Error", "Internal Device Failure", "Timeout", "Data Parity", "Address Parity", "Cache Parity", @@ -166,9 +168,9 @@ static int log_rtas_len(char * buf) len += err->extended_log_length; } - if (rtas_error_log_max == 0) { - get_eventscan_parms(); - } + if (rtas_error_log_max == 0) + rtas_error_log_max = rtas_get_error_log_max(); + if (len > rtas_error_log_max) len = rtas_error_log_max; @@ -215,8 +217,8 @@ void pSeries_log_error(char *buf, unsigned int err_type, int fatal) } /* Write error to NVRAM */ - if (!no_logging && !(err_type & ERR_FLAG_BOOT)) - nvram_write_error_log(buf, len, err_type); + if (!no_more_logging && !(err_type & ERR_FLAG_BOOT)) + nvram_write_error_log(buf, len, err_type, error_log_cnt); /* * rtas errors can occur during boot, and we do want to capture @@ -227,8 +229,8 @@ void pSeries_log_error(char *buf, unsigned int err_type, int fatal) printk_log_rtas(buf, len); /* Check to see if we need to or have stopped logging */ - if (fatal || no_logging) { - no_logging = 1; + if (fatal || no_more_logging) { + no_more_logging = 1; spin_unlock_irqrestore(&rtasd_log_lock, s); return; } @@ -300,7 +302,7 @@ static ssize_t rtas_log_read(struct file * file, char __user * buf, spin_lock_irqsave(&rtasd_log_lock, s); /* if it's 0, then we know we got the last one (the one in NVRAM) */ - if (rtas_log_size == 0 && !no_logging) + if (rtas_log_size == 0 && !no_more_logging) nvram_clear_error_log(); spin_unlock_irqrestore(&rtasd_log_lock, s); @@ -356,32 +358,7 @@ static int enable_surveillance(int timeout) return -1; } -static int get_eventscan_parms(void) -{ - struct device_node *node; - const int *ip; - - node = of_find_node_by_path("/rtas"); - - ip = of_get_property(node, "rtas-event-scan-rate", NULL); - if (ip == NULL) { - printk(KERN_ERR "rtasd: no rtas-event-scan-rate\n"); - of_node_put(node); - return -1; - } - rtas_event_scan_rate = *ip; - DEBUG("rtas-event-scan-rate %d\n", rtas_event_scan_rate); - - /* Make room for the sequence number */ - rtas_error_log_max = rtas_get_error_log_max(); - rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int); - - of_node_put(node); - - return 0; -} - -static void do_event_scan(int event_scan) +static void do_event_scan(void) { int error; do { @@ -408,7 +385,7 @@ static void do_event_scan_all_cpus(long delay) cpu = first_cpu(cpu_online_map); for (;;) { set_cpus_allowed(current, cpumask_of_cpu(cpu)); - do_event_scan(rtas_token("event-scan")); + do_event_scan(); set_cpus_allowed(current, CPU_MASK_ALL); /* Drop hotplug lock, and sleep for the specified delay */ @@ -426,31 +403,17 @@ static void do_event_scan_all_cpus(long delay) static int rtasd(void *unused) { unsigned int err_type; - int event_scan = rtas_token("event-scan"); int rc; daemonize("rtasd"); - if (event_scan == RTAS_UNKNOWN_SERVICE || get_eventscan_parms() == -1) - goto error; - - rtas_log_buf = vmalloc(rtas_error_log_buffer_max*LOG_NUMBER); - if (!rtas_log_buf) { - printk(KERN_ERR "rtasd: no memory\n"); - goto error; - } - printk(KERN_DEBUG "RTAS daemon started\n"); - DEBUG("will sleep for %d milliseconds\n", (30000/rtas_event_scan_rate)); /* See if we have any error stored in NVRAM */ memset(logdata, 0, rtas_error_log_max); - - rc = nvram_read_error_log(logdata, rtas_error_log_max, &err_type); - - /* We can use rtas_log_buf now */ - no_logging = 0; + rc = nvram_read_error_log(logdata, rtas_error_log_max, + &err_type, &error_log_cnt); if (!rc) { if (err_type != ERR_FLAG_ALREADY_LOGGED) { @@ -473,8 +436,6 @@ static int rtasd(void *unused) for (;;) do_event_scan_all_cpus(30000/rtas_event_scan_rate); -error: - /* Should delete proc entries */ return -EINVAL; } @@ -486,11 +447,28 @@ static int __init rtas_init(void) return 0; /* No RTAS */ - if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) { + event_scan = rtas_token("event-scan"); + if (event_scan == RTAS_UNKNOWN_SERVICE) { printk(KERN_DEBUG "rtasd: no event-scan on system\n"); return -ENODEV; } + rtas_event_scan_rate = rtas_token("rtas-event-scan-rate"); + if (rtas_event_scan_rate == RTAS_UNKNOWN_SERVICE) { + printk(KERN_ERR "rtasd: no rtas-event-scan-rate on system\n"); + return -ENODEV; + } + + /* Make room for the sequence number */ + rtas_error_log_max = rtas_get_error_log_max(); + rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int); + + rtas_log_buf = vmalloc(rtas_error_log_buffer_max*LOG_NUMBER); + if (!rtas_log_buf) { + printk(KERN_ERR "rtasd: no memory\n"); + return -ENOMEM; + } + entry = create_proc_entry("ppc64/rtas/error_log", S_IRUSR, NULL); if (entry) entry->proc_fops = &proc_rtas_log_operations; diff --git a/arch/powerpc/sysdev/commproc.c b/arch/powerpc/sysdev/commproc.c index 4f67b89ba1d..e8e79f83d19 100644 --- a/arch/powerpc/sysdev/commproc.c +++ b/arch/powerpc/sysdev/commproc.c @@ -45,10 +45,10 @@ #define CPM_MAP_SIZE (0x4000) static void m8xx_cpm_dpinit(void); -static uint host_buffer; /* One page of host buffer */ -static uint host_end; /* end + 1 */ -cpm8xx_t *cpmp; /* Pointer to comm processor space */ -cpic8xx_t *cpic_reg; +static uint host_buffer; /* One page of host buffer */ +static uint host_end; /* end + 1 */ +cpm8xx_t *cpmp; /* Pointer to comm processor space */ +cpic8xx_t *cpic_reg; static struct device_node *cpm_pic_node; static struct irq_host *cpm_pic_host; @@ -115,7 +115,7 @@ static int cpm_pic_host_map(struct irq_host *h, unsigned int virq, * and return. This is a no-op function so we don't need any special * tests in the interrupt handler. */ -static irqreturn_t cpm_error_interrupt(int irq, void *dev) +static irqreturn_t cpm_error_interrupt(int irq, void *dev) { return IRQ_HANDLED; } @@ -181,7 +181,7 @@ unsigned int cpm_pic_init(void) printk(KERN_ERR "CPM PIC init: can not find cpm node\n"); goto end; } - eirq= irq_of_parse_and_map(np, 0); + eirq = irq_of_parse_and_map(np, 0); if (eirq == NO_IRQ) goto end; @@ -197,15 +197,15 @@ end: void cpm_reset(void) { - cpm8xx_t *commproc; - sysconf8xx_t *siu_conf; + cpm8xx_t *commproc; + sysconf8xx_t *siu_conf; commproc = (cpm8xx_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE); #ifdef CONFIG_UCODE_PATCH /* Perform a reset. */ - out_be16(&commproc->cp_cpcr, CPM_CR_RST | CPM_CR_FLG); + out_be16(&commproc->cp_cpcr, CPM_CR_RST | CPM_CR_FLG); /* Wait for it. */ @@ -307,7 +307,7 @@ static rh_block_t cpm_boot_dpmem_rh_block[16]; static rh_info_t cpm_dpmem_info; #define CPM_DPMEM_ALIGNMENT 8 -static u8* dpram_vbase; +static u8 *dpram_vbase; static uint dpram_pbase; void m8xx_cpm_dpinit(void) diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c index 92441297479..dbe8d180218 100644 --- a/arch/powerpc/sysdev/cpm2_common.c +++ b/arch/powerpc/sysdev/cpm2_common.c @@ -201,7 +201,7 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) } if (mode == CPM_CLK_RX) - shift +=3; + shift += 3; for (i=0; i<24; i++) { if (clk_map[i][0] == target && clk_map[i][1] == clock) { diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index a1d2042bb30..e0e24b01e3a 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -204,7 +204,7 @@ static void dart_free(struct iommu_table *tbl, long index, long npages) } -static int dart_init(struct device_node *dart_node) +static int __init dart_init(struct device_node *dart_node) { unsigned int i; unsigned long tmp, base, size; @@ -313,7 +313,7 @@ static void pci_dma_bus_setup_dart(struct pci_bus *bus) PCI_DN(dn)->iommu_table = &iommu_table_dart; } -void iommu_init_early_dart(void) +void __init iommu_init_early_dart(void) { struct device_node *dn; diff --git a/arch/powerpc/sysdev/dcr.c b/arch/powerpc/sysdev/dcr.c index 574b6ef44e0..e82d54de8a8 100644 --- a/arch/powerpc/sysdev/dcr.c +++ b/arch/powerpc/sysdev/dcr.c @@ -33,6 +33,7 @@ unsigned int dcr_resource_start(struct device_node *np, unsigned int index) return dr[index * 2]; } +EXPORT_SYMBOL_GPL(dcr_resource_start); unsigned int dcr_resource_len(struct device_node *np, unsigned int index) { @@ -44,6 +45,7 @@ unsigned int dcr_resource_len(struct device_node *np, unsigned int index) return dr[index * 2 + 1]; } +EXPORT_SYMBOL_GPL(dcr_resource_len); #ifndef CONFIG_PPC_DCR_NATIVE @@ -122,6 +124,7 @@ dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n, ret.token -= dcr_n * ret.stride; return ret; } +EXPORT_SYMBOL_GPL(dcr_map); void dcr_unmap(dcr_host_t host, unsigned int dcr_n, unsigned int dcr_c) { @@ -133,5 +136,6 @@ void dcr_unmap(dcr_host_t host, unsigned int dcr_n, unsigned int dcr_c) iounmap(h.token); h.token = NULL; } +EXPORT_SYMBOL_GPL(dcr_unmap); #endif /* !defined(CONFIG_PPC_DCR_NATIVE) */ diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 1cf29c9d440..f3abce11bea 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -321,21 +321,26 @@ static struct i2c_driver_device i2c_devices[] __initdata = { {"ricoh,rv5c387a", "rtc-rs5c372", "rv5c387a",}, }; -static int __init of_find_i2c_driver(struct device_node *node, struct i2c_board_info *info) +static int __init of_find_i2c_driver(struct device_node *node, + struct i2c_board_info *info) { int i; for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) { if (!of_device_is_compatible(node, i2c_devices[i].of_device)) continue; - strncpy(info->driver_name, i2c_devices[i].i2c_driver, KOBJ_NAME_LEN); - strncpy(info->type, i2c_devices[i].i2c_type, I2C_NAME_SIZE); + if (strlcpy(info->driver_name, i2c_devices[i].i2c_driver, + KOBJ_NAME_LEN) >= KOBJ_NAME_LEN || + strlcpy(info->type, i2c_devices[i].i2c_type, + I2C_NAME_SIZE) >= I2C_NAME_SIZE) + return -ENOMEM; return 0; } return -ENODEV; } -static void __init of_register_i2c_devices(struct device_node *adap_node, int bus_num) +static void __init of_register_i2c_devices(struct device_node *adap_node, + int bus_num) { struct device_node *node = NULL; diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c index 5294560c7b0..b5d068204aa 100644 --- a/arch/powerpc/sysdev/indirect_pci.c +++ b/arch/powerpc/sysdev/indirect_pci.c @@ -144,8 +144,8 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset, static struct pci_ops indirect_pci_ops = { - indirect_read_config, - indirect_write_config + .read = indirect_read_config, + .write = indirect_write_config, }; void __init diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c index 90db8a720fe..cf0bfbd7340 100644 --- a/arch/powerpc/sysdev/tsi108_pci.c +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -193,8 +193,8 @@ void tsi108_clear_pci_cfg_error(void) } static struct pci_ops tsi108_direct_pci_ops = { - tsi108_direct_read_config, - tsi108_direct_write_config + .read = tsi108_direct_read_config, + .write = tsi108_direct_write_config, }; int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary) diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c index 89059895a20..47180b3fca5 100644 --- a/arch/powerpc/sysdev/uic.c +++ b/arch/powerpc/sysdev/uic.c @@ -24,6 +24,7 @@ #include <linux/spinlock.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/kernel_stat.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/prom.h> @@ -142,7 +143,7 @@ static int uic_set_irq_type(unsigned int virq, unsigned int flow_type) desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; - if (trigger) + if (!trigger) desc->status |= IRQ_LEVEL; spin_unlock_irqrestore(&uic->lock, flags); @@ -159,6 +160,64 @@ static struct irq_chip uic_irq_chip = { .set_type = uic_set_irq_type, }; +/** + * handle_uic_irq - irq flow handler for UIC + * @irq: the interrupt number + * @desc: the interrupt description structure for this irq + * + * This is modified version of the generic handle_level_irq() suitable + * for the UIC. On the UIC, acking (i.e. clearing the SR bit) a level + * irq will have no effect if the interrupt is still asserted by the + * device, even if the interrupt is already masked. Therefore, unlike + * the standard handle_level_irq(), we must ack the interrupt *after* + * invoking the ISR (which should have de-asserted the interrupt in + * the external source). For edge interrupts we ack at the beginning + * instead of the end, to keep the window in which we can miss an + * interrupt as small as possible. + */ +void fastcall handle_uic_irq(unsigned int irq, struct irq_desc *desc) +{ + unsigned int cpu = smp_processor_id(); + struct irqaction *action; + irqreturn_t action_ret; + + spin_lock(&desc->lock); + if (desc->status & IRQ_LEVEL) + desc->chip->mask(irq); + else + desc->chip->mask_ack(irq); + + if (unlikely(desc->status & IRQ_INPROGRESS)) + goto out_unlock; + desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); + kstat_cpu(cpu).irqs[irq]++; + + /* + * If its disabled or no action available + * keep it masked and get out of here + */ + action = desc->action; + if (unlikely(!action || (desc->status & IRQ_DISABLED))) { + desc->status |= IRQ_PENDING; + goto out_unlock; + } + + desc->status |= IRQ_INPROGRESS; + desc->status &= ~IRQ_PENDING; + spin_unlock(&desc->lock); + + action_ret = handle_IRQ_event(irq, action); + + spin_lock(&desc->lock); + desc->status &= ~IRQ_INPROGRESS; + if (desc->status & IRQ_LEVEL) + desc->chip->ack(irq); + if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask) + desc->chip->unmask(irq); +out_unlock: + spin_unlock(&desc->lock); +} + static int uic_host_match(struct irq_host *h, struct device_node *node) { struct uic *uic = h->host_data; @@ -173,7 +232,7 @@ static int uic_host_map(struct irq_host *h, unsigned int virq, set_irq_chip_data(virq, uic); /* Despite the name, handle_level_irq() works for both level * and edge irqs on UIC. FIXME: check this is correct */ - set_irq_chip_and_handler(virq, &uic_irq_chip, handle_level_irq); + set_irq_chip_and_handler(virq, &uic_irq_chip, handle_uic_irq); /* Set default irq type */ set_irq_type(virq, IRQ_TYPE_NONE); @@ -207,6 +266,9 @@ irqreturn_t uic_cascade(int virq, void *data) int subvirq; msr = mfdcr(uic->dcrbase + UIC_MSR); + if (!msr) /* spurious interrupt */ + return IRQ_HANDLED; + src = 32 - ffs(msr); subvirq = irq_linear_revmap(uic->irqhost, src); |