diff options
Diffstat (limited to 'arch/powerpc')
332 files changed, 11119 insertions, 3906 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 1189d8d6170..4bb2e9310a5 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -49,6 +49,19 @@ config IRQ_PER_CPU bool default y +config STACKTRACE_SUPPORT + bool + default y + +config TRACE_IRQFLAGS_SUPPORT + bool + depends on PPC64 + default y + +config LOCKDEP_SUPPORT + bool + default y + config RWSEM_GENERIC_SPINLOCK bool @@ -81,6 +94,11 @@ config GENERIC_FIND_NEXT_BIT bool default y +config GENERIC_GPIO + bool + help + Generic GPIO API support + config ARCH_NO_VIRT_TO_BUS def_bool PPC64 @@ -91,6 +109,7 @@ config PPC select HAVE_OPROFILE select HAVE_KPROBES select HAVE_KRETPROBES + select HAVE_LMB config EARLY_PRINTK bool @@ -210,15 +229,6 @@ source kernel/Kconfig.hz source kernel/Kconfig.preempt source "fs/Kconfig.binfmt" -# We optimistically allocate largepages from the VM, so make the limit -# large enough (16MB). This badly named config option is actually -# max order + 1 -config FORCE_MAX_ZONEORDER - int - depends on PPC64 - default "9" if PPC_64K_PAGES - default "13" - config HUGETLB_PAGE_SIZE_VARIABLE bool depends on HUGETLB_PAGE @@ -307,6 +317,16 @@ config CRASH_DUMP Don't change this unless you know what you are doing. +config PHYP_DUMP + bool "Hypervisor-assisted dump (EXPERIMENTAL)" + depends on PPC_PSERIES && EXPERIMENTAL + help + Hypervisor-assisted dump is meant to be a kdump replacement + offering robustness and speed not possible without system + hypervisor assistence. + + If unsure, say "N" + config PPCBUG_NVRAM bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC default y if PPC_PREP @@ -381,6 +401,26 @@ config PPC_64K_PAGES while on hardware with such support, it will be used to map normal application pages. +config FORCE_MAX_ZONEORDER + int "Maximum zone order" + default "9" if PPC_64K_PAGES + default "13" if PPC64 && !PPC_64K_PAGES + default "11" + help + The kernel memory allocator divides physically contiguous memory + blocks into "zones", where each zone is a power of two number of + pages. This option selects the largest power of two that the kernel + keeps in the memory allocator. If you need to allocate very large + blocks of physically contiguous memory, then you may need to + increase this value. + + This config option is actually maximum order plus one. For example, + a value of 11 means that the largest free memory block is 2^10 pages. + + The page size is not necessarily 4KB. For example, on 64-bit + systems, 64KB pages can be enabled via CONFIG_PPC_64K_PAGES. Keep + this in mind when choosing a value for this option. + config PPC_SUBPAGE_PROT bool "Support setting protections for 4k subpages" depends on PPC_64K_PAGES @@ -490,6 +530,14 @@ config FSL_PCI bool select PPC_INDIRECT_PCI +config 4xx_SOC + bool + +config FSL_LBC + bool + help + Freescale Localbus support + # Yes MCA RS/6000s exist but Linux-PPC does not currently support any config MCA bool @@ -663,22 +711,6 @@ config CONSISTENT_SIZE hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL default "0x00200000" if NOT_COHERENT_CACHE -config BOOT_LOAD_BOOL - bool "Set the boot link/load address" - depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM - help - This option allows you to set the initial load address of the zImage - or zImage.initrd file. This can be useful if you are on a board - which has a small amount of memory. - - Say N here unless you know what you are doing. - -config BOOT_LOAD - hex "Link/load address for booting" if BOOT_LOAD_BOOL - default "0x00400000" if 40x || 8xx || 8260 - default "0x01000000" if 44x - default "0x00800000" - config PIN_TLB bool "Pinned Kernel TLBs (860 ONLY)" depends on ADVANCED_OPTIONS && 8xx diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index db7cc34c24d..a86d8d85321 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -269,7 +269,7 @@ config PPC_EARLY_DEBUG_CPM_ADDR hex "CPM UART early debug transmit descriptor address" depends on PPC_EARLY_DEBUG_CPM default "0xfa202008" if PPC_EP88XC - default "0xf0000008" if CPM2 + default "0xf0001ff8" if CPM2 default "0xff002008" if CPM1 help This specifies the address of the transmit descriptor diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index ab5cfe8ef98..e2ec4a91cce 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -71,13 +71,11 @@ endif LDFLAGS_vmlinux := -Bstatic -CPPFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) -AFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=none -mcall-aixdesc -CFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) -ffixed-r2 -mmultiple -KBUILD_CPPFLAGS += $(CPPFLAGS-y) -KBUILD_AFLAGS += $(AFLAGS-y) -KBUILD_CFLAGS += -msoft-float -pipe $(CFLAGS-y) +CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple +KBUILD_CPPFLAGS += -Iarch/$(ARCH) +KBUILD_AFLAGS += -Iarch/$(ARCH) +KBUILD_CFLAGS += -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y) CPP = $(CC) -E $(KBUILD_CFLAGS) CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__ @@ -164,7 +162,7 @@ boot := arch/$(ARCH)/boot $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@) -bootwrapper_install: +bootwrapper_install %.dtb: $(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@) define archhelp diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 1aded8f759d..5ba50c67339 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -40,6 +40,7 @@ $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 +$(obj)/virtex405-head.o: BOOTCFLAGS += -mcpu=405 zlib := inffast.c inflate.c inftrees.c @@ -64,7 +65,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \ fixed-head.S ep88xc.c ep405.c \ cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ - cuboot-warp.c cuboot-85xx-cpm2.c + cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ + virtex405-head.S src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -192,7 +194,7 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac image-$(CONFIG_PPC_HOLLY) += zImage.holly -image-$(CONFIG_PPC_PRPMC2800) += zImage.prpmc2800 +image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800 image-$(CONFIG_PPC_ISERIES) += zImage.iseries image-$(CONFIG_DEFAULT_UIMAGE) += uImage @@ -216,6 +218,7 @@ image-$(CONFIG_RAINIER) += cuImage.rainier image-$(CONFIG_TAISHAN) += cuImage.taishan image-$(CONFIG_KATMAI) += cuImage.katmai image-$(CONFIG_WARP) += cuImage.warp +image-$(CONFIG_YOSEMITE) += cuImage.yosemite # Board ports in arch/powerpc/platform/8xx/Kconfig image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads @@ -255,6 +258,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm8555 image-$(CONFIG_TQM8560) += cuImage.tqm8560 image-$(CONFIG_SBC8548) += cuImage.sbc8548 image-$(CONFIG_SBC8560) += cuImage.sbc8560 +image-$(CONFIG_KSI8560) += cuImage.ksi8560 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig image-$(CONFIG_STORCENTER) += cuImage.storcenter @@ -285,11 +289,11 @@ $(obj)/zImage.%: vmlinux $(wrapperbits) $(call if_changed,wrap,$*) # dtbImage% - a dtbImage is a zImage with an embedded device tree blob -$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts - $(call if_changed,wrap,$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz) +$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb + $(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) -$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(dtstree)/%.dts - $(call if_changed,wrap,$*,$(dtstree)/$*.dts) +$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb + $(call if_changed,wrap,$*,,$(obj)/$*.dtb) # This cannot be in the root of $(src) as the zImage rule always adds a $(obj) # prefix @@ -302,14 +306,24 @@ $(obj)/zImage.iseries: vmlinux $(obj)/uImage: vmlinux $(wrapperbits) $(call if_changed,wrap,uboot) -$(obj)/cuImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits) - $(call if_changed,wrap,cuboot-$*,$(dtstree)/$*.dts) +$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb) -$(obj)/treeImage.initrd.%: vmlinux $(dtstree)/%.dts $(wrapperbits) - $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz) +$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) -$(obj)/treeImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits) - $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts) +$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb) + +$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) + +$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb) + +# Rule to build device tree blobs +$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc + $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts # If there isn't a platform selected then just strip the vmlinux. ifeq (,$(image-y)) @@ -326,7 +340,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) # anything not in $(targets) clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* treeImage.* \ - otheros.bld + otheros.bld *.dtb # clean up files cached by wrapper clean-kernel := vmlinux.strip vmlinux.bin diff --git a/arch/powerpc/boot/bamboo.c b/arch/powerpc/boot/bamboo.c index 54b33f1500e..b82cacbc60d 100644 --- a/arch/powerpc/boot/bamboo.c +++ b/arch/powerpc/boot/bamboo.c @@ -33,7 +33,8 @@ static void bamboo_fixups(void) ibm440ep_fixup_clocks(sysclk, 11059200, 25000000); ibm4xx_sdram_fixup_memsize(); ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00); - dt_fixup_mac_addresses(bamboo_mac0, bamboo_mac1); + dt_fixup_mac_address_by_alias("ethernet0", bamboo_mac0); + dt_fixup_mac_address_by_alias("ethernet1", bamboo_mac1); } void bamboo_init(void *mac0, void *mac1) diff --git a/arch/powerpc/boot/cpm-serial.c b/arch/powerpc/boot/cpm-serial.c index 28296facb2a..19dc15abe43 100644 --- a/arch/powerpc/boot/cpm-serial.c +++ b/arch/powerpc/boot/cpm-serial.c @@ -11,6 +11,7 @@ #include "types.h" #include "io.h" #include "ops.h" +#include "page.h" struct cpm_scc { u32 gsmrl; @@ -42,6 +43,22 @@ struct cpm_param { u16 tbase; u8 rfcr; u8 tfcr; + u16 mrblr; + u32 rstate; + u8 res1[4]; + u16 rbptr; + u8 res2[6]; + u32 tstate; + u8 res3[4]; + u16 tbptr; + u8 res4[6]; + u16 maxidl; + u16 idlc; + u16 brkln; + u16 brkec; + u16 brkcr; + u16 rmask; + u8 res5[4]; }; struct cpm_bd { @@ -54,10 +71,10 @@ static void *cpcr; static struct cpm_param *param; static struct cpm_smc *smc; static struct cpm_scc *scc; -struct cpm_bd *tbdf, *rbdf; +static struct cpm_bd *tbdf, *rbdf; static u32 cpm_cmd; -static u8 *muram_start; -static u32 muram_offset; +static void *cbd_addr; +static u32 cbd_offset; static void (*do_cmd)(int op); static void (*enable_port)(void); @@ -119,20 +136,25 @@ static int cpm_serial_open(void) out_8(¶m->rfcr, 0x10); out_8(¶m->tfcr, 0x10); - - rbdf = (struct cpm_bd *)muram_start; - rbdf->addr = (u8 *)(rbdf + 2); + out_be16(¶m->mrblr, 1); + out_be16(¶m->maxidl, 0); + out_be16(¶m->brkec, 0); + out_be16(¶m->brkln, 0); + out_be16(¶m->brkcr, 0); + + rbdf = cbd_addr; + rbdf->addr = (u8 *)rbdf - 1; rbdf->sc = 0xa000; rbdf->len = 1; tbdf = rbdf + 1; - tbdf->addr = (u8 *)(rbdf + 2) + 1; + tbdf->addr = (u8 *)rbdf - 2; tbdf->sc = 0x2000; tbdf->len = 1; sync(); - out_be16(¶m->rbase, muram_offset); - out_be16(¶m->tbase, muram_offset + sizeof(struct cpm_bd)); + out_be16(¶m->rbase, cbd_offset); + out_be16(¶m->tbase, cbd_offset + sizeof(struct cpm_bd)); do_cmd(CPM_CMD_INIT_RX_TX); @@ -175,10 +197,12 @@ static unsigned char cpm_serial_getc(void) int cpm_console_init(void *devp, struct serial_console_data *scdp) { - void *reg_virt[2]; - int is_smc = 0, is_cpm2 = 0, n; - unsigned long reg_phys; + void *vreg[2]; + u32 reg[2]; + int is_smc = 0, is_cpm2 = 0; void *parent, *muram; + void *muram_addr; + unsigned long muram_offset, muram_size; if (dt_is_compatible(devp, "fsl,cpm1-smc-uart")) { is_smc = 1; @@ -202,63 +226,64 @@ int cpm_console_init(void *devp, struct serial_console_data *scdp) else do_cmd = cpm1_cmd; - n = getprop(devp, "fsl,cpm-command", &cpm_cmd, 4); - if (n < 4) + if (getprop(devp, "fsl,cpm-command", &cpm_cmd, 4) < 4) return -1; - n = getprop(devp, "virtual-reg", reg_virt, sizeof(reg_virt)); - if (n < (int)sizeof(reg_virt)) { - for (n = 0; n < 2; n++) { - if (!dt_xlate_reg(devp, n, ®_phys, NULL)) - return -1; - - reg_virt[n] = (void *)reg_phys; - } - } + if (dt_get_virtual_reg(devp, vreg, 2) < 2) + return -1; if (is_smc) - smc = reg_virt[0]; + smc = vreg[0]; else - scc = reg_virt[0]; + scc = vreg[0]; - param = reg_virt[1]; + param = vreg[1]; parent = get_parent(devp); if (!parent) return -1; - n = getprop(parent, "virtual-reg", reg_virt, sizeof(reg_virt)); - if (n < (int)sizeof(reg_virt)) { - if (!dt_xlate_reg(parent, 0, ®_phys, NULL)) - return -1; - - reg_virt[0] = (void *)reg_phys; - } - - cpcr = reg_virt[0]; + if (dt_get_virtual_reg(parent, &cpcr, 1) < 1) + return -1; muram = finddevice("/soc/cpm/muram/data"); if (!muram) return -1; /* For bootwrapper-compatible device trees, we assume that the first - * entry has at least 18 bytes, and that #address-cells/#data-cells + * entry has at least 128 bytes, and that #address-cells/#data-cells * is one for both parent and child. */ - n = getprop(muram, "virtual-reg", reg_virt, sizeof(reg_virt)); - if (n < (int)sizeof(reg_virt)) { - if (!dt_xlate_reg(muram, 0, ®_phys, NULL)) - return -1; + if (dt_get_virtual_reg(muram, &muram_addr, 1) < 1) + return -1; - reg_virt[0] = (void *)reg_phys; - } + if (getprop(muram, "reg", reg, 8) < 8) + return -1; - muram_start = reg_virt[0]; + muram_offset = reg[0]; + muram_size = reg[1]; - n = getprop(muram, "reg", &muram_offset, 4); - if (n < 4) - return -1; + /* Store the buffer descriptors at the end of the first muram chunk. + * For SMC ports on CPM2-based platforms, relocate the parameter RAM + * just before the buffer descriptors. + */ + + cbd_offset = muram_offset + muram_size - 2 * sizeof(struct cpm_bd); + + if (is_cpm2 && is_smc) { + u16 *smc_base = (u16 *)param; + u16 pram_offset; + + pram_offset = cbd_offset - 64; + pram_offset = _ALIGN_DOWN(pram_offset, 64); + + disable_port(); + out_be16(smc_base, pram_offset); + param = muram_addr - muram_offset + pram_offset; + } + + cbd_addr = muram_addr - muram_offset + cbd_offset; scdp->open = cpm_serial_open; scdp->putc = cpm_serial_putc; diff --git a/arch/powerpc/boot/cuboot-pq2.c b/arch/powerpc/boot/cuboot-pq2.c index f56ac6cae9f..9c7d1342829 100644 --- a/arch/powerpc/boot/cuboot-pq2.c +++ b/arch/powerpc/boot/cuboot-pq2.c @@ -128,7 +128,7 @@ static void fixup_pci(void) u8 *soc_regs; int i, len; void *node, *parent_node; - u32 naddr, nsize, mem_log2; + u32 naddr, nsize, mem_pow2, mem_mask; node = finddevice("/pci"); if (!node || !dt_is_compatible(node, "fsl,pq2-pci")) @@ -141,7 +141,7 @@ static void fixup_pci(void) soc_regs = (u8 *)fsl_get_immr(); if (!soc_regs) - goto err; + goto unhandled; dt_get_reg_format(node, &naddr, &nsize); if (naddr != 3 || nsize != 2) @@ -153,7 +153,7 @@ static void fixup_pci(void) dt_get_reg_format(parent_node, &naddr, &nsize); if (naddr != 1 || nsize != 1) - goto err; + goto unhandled; len = getprop(node, "ranges", pci_ranges_buf, sizeof(pci_ranges_buf)); @@ -170,14 +170,20 @@ static void fixup_pci(void) } if (!mem || !mmio || !io) - goto err; + goto unhandled; + if (mem->size[1] != mmio->size[1]) + goto unhandled; + if (mem->size[1] & (mem->size[1] - 1)) + goto unhandled; + if (io->size[1] & (io->size[1] - 1)) + goto unhandled; if (mem->phys_addr + mem->size[1] == mmio->phys_addr) mem_base = mem; else if (mmio->phys_addr + mmio->size[1] == mem->phys_addr) mem_base = mmio; else - goto err; + goto unhandled; out_be32(&pci_regs[1][0], mem_base->phys_addr | 1); out_be32(&pci_regs[2][0], ~(mem->size[1] + mmio->size[1] - 1)); @@ -201,8 +207,9 @@ static void fixup_pci(void) out_le32(&pci_regs[0][58], 0); out_le32(&pci_regs[0][60], 0); - mem_log2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1); - out_le32(&pci_regs[0][62], 0xa0000000 | ~((1 << (mem_log2 - 12)) - 1)); + mem_pow2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1); + mem_mask = ~(mem_pow2 - 1) >> 12; + out_le32(&pci_regs[0][62], 0xa0000000 | mem_mask); /* If PCI is disabled, drive RST high to enable. */ if (!(in_le32(&pci_regs[0][32]) & 1)) { @@ -228,7 +235,11 @@ static void fixup_pci(void) return; err: - printf("Bad PCI node\r\n"); + printf("Bad PCI node -- using existing firmware setup.\r\n"); + return; + +unhandled: + printf("Unsupported PCI node -- using existing firmware setup.\r\n"); } static void pq2_platform_fixups(void) diff --git a/arch/powerpc/boot/cuboot-rainier.c b/arch/powerpc/boot/cuboot-rainier.c index cf452b66dce..0a3fddee54d 100644 --- a/arch/powerpc/boot/cuboot-rainier.c +++ b/arch/powerpc/boot/cuboot-rainier.c @@ -42,7 +42,8 @@ static void rainier_fixups(void) ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ibm4xx_denali_fixup_memsize(); - dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); } void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, diff --git a/arch/powerpc/boot/cuboot-sequoia.c b/arch/powerpc/boot/cuboot-sequoia.c index f555575a44d..caf8f2e842e 100644 --- a/arch/powerpc/boot/cuboot-sequoia.c +++ b/arch/powerpc/boot/cuboot-sequoia.c @@ -42,7 +42,8 @@ static void sequoia_fixups(void) ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ibm4xx_denali_fixup_memsize(); - dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); } void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, diff --git a/arch/powerpc/boot/cuboot-taishan.c b/arch/powerpc/boot/cuboot-taishan.c index b55b80467ee..9bc906a754d 100644 --- a/arch/powerpc/boot/cuboot-taishan.c +++ b/arch/powerpc/boot/cuboot-taishan.c @@ -40,7 +40,8 @@ static void taishan_fixups(void) ibm4xx_sdram_fixup_memsize(); - dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); } diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c index 3db93e85e9e..eb108a87749 100644 --- a/arch/powerpc/boot/cuboot-warp.c +++ b/arch/powerpc/boot/cuboot-warp.c @@ -24,7 +24,7 @@ static void warp_fixups(void) ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); ibm4xx_sdram_fixup_memsize(); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); - dt_fixup_mac_addresses(&bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); } diff --git a/arch/powerpc/boot/cuboot-yosemite.c b/arch/powerpc/boot/cuboot-yosemite.c new file mode 100644 index 00000000000..cc6e338c5d0 --- /dev/null +++ b/arch/powerpc/boot/cuboot-yosemite.c @@ -0,0 +1,44 @@ +/* + * Old U-boot compatibility for Yosemite + * + * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Copyright 2008 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + +static void yosemite_fixups(void) +{ + unsigned long sysclk = 66666666; + + ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); + ibm4xx_sdram_fixup_memsize(); + ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = yosemite_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c index 60f561e307a..5d12336dc36 100644 --- a/arch/powerpc/boot/devtree.c +++ b/arch/powerpc/boot/devtree.c @@ -350,3 +350,23 @@ int dt_is_compatible(void *node, const char *compat) return 0; } + +int dt_get_virtual_reg(void *node, void **addr, int nres) +{ + unsigned long xaddr; + int n; + + n = getprop(node, "virtual-reg", addr, nres * 4); + if (n > 0) + return n / 4; + + for (n = 0; n < nres; n++) { + if (!dt_xlate_reg(node, n, &xaddr, NULL)) + break; + + addr[n] = (void *)xaddr; + } + + return n; +} + diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts index 7dc37c9a744..ba2521bdaab 100644 --- a/arch/powerpc/boot/dts/bamboo.dts +++ b/arch/powerpc/boot/dts/bamboo.dts @@ -204,7 +204,6 @@ }; EMAC0: ethernet@ef600e00 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; @@ -225,7 +224,6 @@ }; EMAC1: ethernet@ef600f00 { - linux,network-index = <1>; device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts new file mode 100644 index 00000000000..6f3d38a1554 --- /dev/null +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -0,0 +1,402 @@ +/* + * Device Tree Source for AMCC Canyonlands (460EX) + * + * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,canyonlands"; + compatible = "amcc,canyonlands"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460EX"; + reg = <0>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <a 4 b 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0f0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <10 4 11 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460ex"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460ex"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-460ex", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460ex", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460ex", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <10>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 6 4 + /*RXEOB*/ 7 4 + /*SERR*/ 3 4 + /*TXDE*/ 4 4 + /*RXDE*/ 5 4>; + }; + + POB0: opb { + compatible = "ibm,opb-460ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <b0000000 4 b0000000 50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460ex", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + interrupts = <6 4>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1d 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1e 4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-460ex", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-460ex", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-460ex", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + RGMII0: emac-rgmii@ef601500 { + compatible = "ibm,rgmii-460ex", "ibm,rgmii"; + reg = <ef601500 8>; + has-mdio; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah-460ex", "ibm,tah"; + reg = <ef601350 30>; + }; + + TAH1: emac-tah@ef601450 { + compatible = "ibm,tah-460ex", "ibm,tah"; + reg = <ef601450 30>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-460ex", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 10 4 + /*Wake*/ 1 &UIC2 14 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-460ex", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 11 4 + /*Wake*/ 1 &UIC2 15 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <c 0ec00000 8 /* Config space access */ + 0 0 0 /* no IACK cycles */ + c 0ed00000 4 /* Special cycles */ + c 0ec80000 100 /* Internal registers */ + c 0ec80100 fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 + 01000000 0 00000000 0000000c 08000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 0 to 0x3f */ + bus-range = <0 3f>; + + /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ + interrupt-map-mask = <0000 0 0 0>; + interrupt-map = < 0000 0 0 0 &UIC1 0 8 >; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0>; /* port number */ + reg = <d 00000000 20000000 /* Config space access */ + c 08010000 00001000>; /* Registers */ + dcr-reg = <100 020>; + sdr-base = <300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 + 01000000 0 00000000 0000000f 80000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 40 to 0x7f */ + bus-range = <40 7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 c 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 d 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 e 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <1>; /* port number */ + reg = <d 20000000 20000000 /* Config space access */ + c 08011000 00001000>; /* Registers */ + dcr-reg = <120 020>; + sdr-base = <340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 + 01000000 0 00000000 0000000f 80010000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 80 to 0xbf */ + bus-range = <80 bf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 10 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 11 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 12 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index 0b000cb7ed8..5079dc890e0 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -241,7 +241,6 @@ }; EMAC0: ethernet@40000800 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; @@ -261,7 +260,6 @@ zmii-channel = <0>; }; EMAC1: ethernet@40000900 { - linux,network-index = <1>; device_type = "network"; compatible = "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; diff --git a/arch/powerpc/boot/dts/ep8248e.dts b/arch/powerpc/boot/dts/ep8248e.dts index 5d2fb76a72c..756758fb5b7 100644 --- a/arch/powerpc/boot/dts/ep8248e.dts +++ b/arch/powerpc/boot/dts/ep8248e.dts @@ -121,8 +121,7 @@ data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 0x1100 0x1140 - 0xec0 0x9800 0x800>; + reg = <0 0x2000 0x9800 0x800>; }; }; @@ -138,7 +137,7 @@ device_type = "serial"; compatible = "fsl,mpc8248-smc-uart", "fsl,cpm2-smc-uart"; - reg = <0x11a80 0x20 0x1100 0x40>; + reg = <0x11a80 0x20 0x87fc 2>; interrupts = <4 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <7>; diff --git a/arch/powerpc/boot/dts/ep88xc.dts b/arch/powerpc/boot/dts/ep88xc.dts index 02705f29979..ae57d624012 100644 --- a/arch/powerpc/boot/dts/ep88xc.dts +++ b/arch/powerpc/boot/dts/ep88xc.dts @@ -2,7 +2,7 @@ * EP88xC Device Tree Source * * Copyright 2006 MontaVista Software, Inc. - * Copyright 2007 Freescale Semiconductor, Inc. + * Copyright 2007,2008 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -10,6 +10,7 @@ * option) any later version. */ +/dts-v1/; / { model = "EP88xC"; @@ -23,44 +24,44 @@ PowerPC,885@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <d#16>; - i-cache-line-size = <d#16>; - d-cache-size = <d#8192>; - i-cache-size = <d#8192>; + reg = <0x0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - interrupts = <f 2>; // decrementer interrupt + interrupts = <15 2>; // decrementer interrupt interrupt-parent = <&PIC>; }; }; memory { device_type = "memory"; - reg = <0 0>; + reg = <0x0 0x0>; }; localbus@fa200100 { compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus"; #address-cells = <2>; #size-cells = <1>; - reg = <fa200100 40>; + reg = <0xfa200100 0x40>; ranges = < - 0 0 fc000000 04000000 - 3 0 fa000000 01000000 + 0x0 0x0 0xfc000000 0x4000000 + 0x3 0x0 0xfa000000 0x1000000 >; flash@0,2000000 { compatible = "cfi-flash"; - reg = <0 2000000 2000000>; + reg = <0x0 0x2000000 0x2000000>; bank-width = <4>; device-width = <2>; }; board-control@3,400000 { - reg = <3 400000 10>; + reg = <0x3 0x400000 0x10>; compatible = "fsl,ep88xc-bcsr"; }; }; @@ -70,25 +71,25 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 fa200000 00004000>; + ranges = <0x0 0xfa200000 0x4000>; bus-frequency = <0>; // Temporary -- will go away once kernel uses ranges for get_immrbase(). - reg = <fa200000 4000>; + reg = <0xfa200000 0x4000>; mdio@e00 { compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio"; - reg = <e00 188>; + reg = <0xe00 0x188>; #address-cells = <1>; #size-cells = <0>; PHY0: ethernet-phy@0 { - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; }; @@ -97,7 +98,7 @@ device_type = "network"; compatible = "fsl,mpc885-fec-enet", "fsl,pq1-fec-enet"; - reg = <e00 188>; + reg = <0xe00 0x188>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <3 1>; interrupt-parent = <&PIC>; @@ -109,7 +110,7 @@ device_type = "network"; compatible = "fsl,mpc885-fec-enet", "fsl,pq1-fec-enet"; - reg = <1e00 188>; + reg = <0x1e00 0x188>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <7 1>; interrupt-parent = <&PIC>; @@ -120,7 +121,7 @@ PIC: interrupt-controller@0 { interrupt-controller; #interrupt-cells = <2>; - reg = <0 24>; + reg = <0x0 0x24>; compatible = "fsl,mpc885-pic", "fsl,pq1-pic"; }; @@ -130,29 +131,29 @@ #size-cells = <2>; compatible = "fsl,pq-pcmcia"; device_type = "pcmcia"; - reg = <80 80>; + reg = <0x80 0x80>; interrupt-parent = <&PIC>; - interrupts = <d 1>; + interrupts = <13 1>; }; cpm@9c0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc885-cpm", "fsl,cpm1"; - command-proc = <9c0>; + command-proc = <0x9c0>; interrupts = <0>; // cpm error interrupt interrupt-parent = <&CPM_PIC>; - reg = <9c0 40>; + reg = <0x9c0 0x40>; ranges; muram@2000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 2000 2000>; + ranges = <0x0 0x2000 0x2000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 1c00>; + reg = <0x0 0x1c00>; }; }; @@ -160,7 +161,7 @@ compatible = "fsl,mpc885-brg", "fsl,cpm1-brg", "fsl,cpm-brg"; - reg = <9f0 10>; + reg = <0x9f0 0x10>; }; CPM_PIC: interrupt-controller@930 { @@ -168,7 +169,7 @@ #interrupt-cells = <1>; interrupts = <5 2 0 2>; interrupt-parent = <&PIC>; - reg = <930 20>; + reg = <0x930 0x20>; compatible = "fsl,mpc885-cpm-pic", "fsl,cpm1-pic"; }; @@ -178,11 +179,11 @@ device_type = "serial"; compatible = "fsl,mpc885-smc-uart", "fsl,cpm1-smc-uart"; - reg = <a80 10 3e80 40>; + reg = <0xa80 0x10 0x3e80 0x40>; interrupts = <4>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <1>; - fsl,cpm-command = <0090>; + fsl,cpm-command = <0x90>; linux,planetcore-label = "SMC1"; }; @@ -191,11 +192,11 @@ device_type = "serial"; compatible = "fsl,mpc885-scc-uart", "fsl,cpm1-scc-uart"; - reg = <a20 20 3d00 80>; - interrupts = <1d>; + reg = <0xa20 0x20 0x3d00 0x80>; + interrupts = <29>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <2>; - fsl,cpm-command = <0040>; + fsl,cpm-command = <0x40>; linux,planetcore-label = "SCC2"; }; @@ -204,9 +205,9 @@ #size-cells = <0>; compatible = "fsl,mpc885-usb", "fsl,cpm1-usb"; - reg = <a00 18 1c00 80>; + reg = <0xa00 0x18 0x1c00 0x80>; interrupt-parent = <&CPM_PIC>; - interrupts = <1e>; + interrupts = <30>; fsl,cpm-command = <0000>; }; }; diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts new file mode 100644 index 00000000000..958a5ca53d3 --- /dev/null +++ b/arch/powerpc/boot/dts/glacier.dts @@ -0,0 +1,467 @@ +/* + * Device Tree Source for AMCC Glacier (460GT) + * + * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,glacier"; + compatible = "amcc,glacier", "amcc,canyonlands"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + ethernet2 = &EMAC2; + ethernet3 = &EMAC3; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460GT"; + reg = <0>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <a 4 b 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0f0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <10 4 11 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460gt"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460gt"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-460gt", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460gt", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460gt", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <4>; + num-rx-chans = <20>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 6 4 + /*RXEOB*/ 7 4 + /*SERR*/ 3 4 + /*TXDE*/ 4 4 + /*RXDE*/ 5 4>; + desc-base-addr-high = <8>; + }; + + POB0: opb { + compatible = "ibm,opb-460gt", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <b0000000 4 b0000000 50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460gt", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + interrupts = <6 4>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1d 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <1e 4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-460gt", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + RGMII0: emac-rgmii@ef601500 { + compatible = "ibm,rgmii-460gt", "ibm,rgmii"; + reg = <ef601500 8>; + has-mdio; + }; + + RGMII1: emac-rgmii@ef601600 { + compatible = "ibm,rgmii-460gt", "ibm,rgmii"; + reg = <ef601600 8>; + has-mdio; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <ef601350 30>; + }; + + TAH1: emac-tah@ef601450 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <ef601450 30>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 10 4 + /*Wake*/ 1 &UIC2 14 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 11 4 + /*Wake*/ 1 &UIC2 15 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC2: ethernet@ef601100 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4"; + interrupt-parent = <&EMAC2>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 12 4 + /*Wake*/ 1 &UIC2 16 4>; + reg = <ef601100 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <10>; + cell-index = <2>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC3: ethernet@ef601200 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4"; + interrupt-parent = <&EMAC3>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC2 13 4 + /*Wake*/ 1 &UIC2 17 4>; + reg = <ef601200 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <3>; + mal-rx-channel = <18>; + cell-index = <3>; + max-frame-size = <2328>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <c 0ec00000 8 /* Config space access */ + 0 0 0 /* no IACK cycles */ + c 0ed00000 4 /* Special cycles */ + c 0ec80000 100 /* Internal registers */ + c 0ec80100 fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 + 01000000 0 00000000 0000000c 08000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 0 to 0x3f */ + bus-range = <0 3f>; + + /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ + interrupt-map-mask = <0000 0 0 0>; + interrupt-map = < 0000 0 0 0 &UIC1 0 8 >; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0>; /* port number */ + reg = <d 00000000 20000000 /* Config space access */ + c 08010000 00001000>; /* Registers */ + dcr-reg = <100 020>; + sdr-base = <300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 + 01000000 0 00000000 0000000f 80000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 40 to 0x7f */ + bus-range = <40 7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 c 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 d 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 e 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <1>; /* port number */ + reg = <d 20000000 20000000 /* Config space access */ + c 08011000 00001000>; /* Registers */ + dcr-reg = <120 020>; + sdr-base = <340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 + 01000000 0 00000000 0000000f 80010000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 80 to 0xbf */ + bus-range = <80 bf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 10 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 11 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 12 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts index ae68fefc01b..b5d95ac24db 100644 --- a/arch/powerpc/boot/dts/haleakala.dts +++ b/arch/powerpc/boot/dts/haleakala.dts @@ -12,7 +12,7 @@ #address-cells = <1>; #size-cells = <1>; model = "amcc,haleakala"; - compatible = "amcc,kilauea"; + compatible = "amcc,haleakala", "amcc,kilauea"; dcr-parent = <&/cpus/cpu@0>; aliases { @@ -218,7 +218,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index fc86e5a3afc..cc2873a531d 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -212,7 +212,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "gmii"; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index 8baef61f31c..48c9a6e71f1 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -219,7 +219,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -247,7 +247,7 @@ mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts new file mode 100644 index 00000000000..f869ce3ca0b --- /dev/null +++ b/arch/powerpc/boot/dts/ksi8560.dts @@ -0,0 +1,267 @@ +/* + * Device Tree Source for Emerson KSI8560 + * + * Author: Alexandr Smirnov <asmirnov@ru.mvista.com> + * + * Based on mpc8560ads.dts + * + * 2008 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + */ + +/dts-v1/; + +/ { + model = "KSI8560"; + compatible = "emerson,KSI8560"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x8000>; /* L1, 32K */ + i-cache-size = <0x8000>; /* L1, 32K */ + timebase-frequency = <0>; /* From U-boot */ + bus-frequency = <0>; /* From U-boot */ + clock-frequency = <0>; /* From U-boot */ + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; /* Fixed by bootwrapper */ + }; + + soc@fdf00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x00000000 0xfdf00000 0x00100000>; + bus-frequency = <0>; /* Fixed by bootwrapper */ + + memory-controller@2000 { + compatible = "fsl,8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&MPIC>; + interrupts = <0x12 0x2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <0x20>; /* 32 bytes */ + cache-size = <0x40000>; /* L2, 256K */ + interrupt-parent = <&MPIC>; + interrupts = <0x10 0x2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&MPIC>; + dfsrr; + }; + + mdio@24520 { /* For TSECs */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + PHY1: ethernet-phy@1 { + interrupt-parent = <&MPIC>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + + PHY2: ethernet-phy@2 { + interrupt-parent = <&MPIC>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + /* Mac address filled in by bootwrapper */ + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupt-parent = <&MPIC>; + phy-handle = <&PHY1>; + }; + + enet1: ethernet@25000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + /* Mac address filled in by bootwrapper */ + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; + interrupt-parent = <&MPIC>; + phy-handle = <&PHY2>; + }; + + MPIC: pic@40000 { + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x4000 0x9000 0x2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <165000000>; /* 166MHz */ + }; + + CPMPIC: pic@90c00 { + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + interrupts = <0x2e 0x2>; + interrupt-parent = <&MPIC>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; + }; + + serial@91a00 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a00 0x20 0x88000 0x100>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x800000>; + current-speed = <0x1c200>; + interrupts = <0x28 0x8>; + interrupt-parent = <&CPMPIC>; + }; + + serial@91a20 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a20 0x20 0x88100 0x100>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x4a00000>; + current-speed = <0x1c200>; + interrupts = <0x29 0x8>; + interrupt-parent = <&CPMPIC>; + }; + + mdio@90d00 { /* For FCCs */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,cpm2-mdio-bitbang"; + reg = <0x90d00 0x14>; + fsl,mdio-pin = <24>; + fsl,mdc-pin = <25>; + + PHY0: ethernet-phy@0 { + interrupt-parent = <&MPIC>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + }; + + enet2: ethernet@91300 { + device_type = "network"; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x91300 0x20 0x88400 0x100 0x91390 0x1>; + /* Mac address filled in by bootwrapper */ + local-mac-address = [ 00 00 00 00 00 00 ]; + fsl,cpm-command = <0x12000300>; + interrupts = <0x20 0x8>; + interrupt-parent = <&CPMPIC>; + phy-handle = <&PHY0>; + }; + }; + }; + + localbus@fdf05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8560-localbus"; + reg = <0xfdf05000 0x68>; + + ranges = <0x0 0x0 0xe0000000 0x00800000 + 0x4 0x0 0xe8080000 0x00080000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <0x2>; + + partition@0 { + label = "Primary Kernel"; + reg = <0x0 0x180000>; + }; + partition@180000 { + label = "Primary Filesystem"; + reg = <0x180000 0x580000>; + }; + partition@700000 { + label = "Monitor"; + reg = <0x300000 0x100000>; + read-only; + }; + }; + + cpld@4,0 { + compatible = "emerson,KSI8560-cpld"; + reg = <0x4 0x0 0x80000>; + }; + }; + + + chosen { + linux,stdout-path = "/soc/cpm/serial@91a00"; + }; +}; diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts index 44695885451..2e5a1a1812b 100644 --- a/arch/powerpc/boot/dts/kuroboxHD.dts +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -7,6 +7,7 @@ * Based on sandpoint.dts * * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de> + * Copyright 2008 Freescale Semiconductor, Inc. * * This file is licensed under * the terms of the GNU General Public License version 2. This program @@ -17,6 +18,8 @@ XXXX add flash parts, rtc, ?? */ +/dts-v1/; + / { model = "KuroboxHD"; compatible = "linkstation"; @@ -35,19 +38,19 @@ XXXX add flash parts, rtc, ?? PowerPC,603e { /* Really 8241 */ device_type = "cpu"; - reg = <0>; - clock-frequency = <bebc200>; /* Fixed by bootloader */ - timebase-frequency = <1743000>; /* Fixed by bootloader */ + reg = <0x0>; + clock-frequency = <200000000>; /* Fixed by bootloader */ + timebase-frequency = <24391680>; /* Fixed by bootloader */ bus-frequency = <0>; /* Fixed by bootloader */ /* Following required by dtc but not used */ - i-cache-size = <4000>; - d-cache-size = <4000>; + i-cache-size = <0x4000>; + d-cache-size = <0x4000>; }; }; memory { device_type = "memory"; - reg = <00000000 04000000>; + reg = <0x0 0x4000000>; }; soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ @@ -56,26 +59,26 @@ XXXX add flash parts, rtc, ?? device_type = "soc"; compatible = "mpc10x"; store-gathering = <0>; /* 0 == off, !0 == on */ - reg = <80000000 00100000>; - ranges = <80000000 80000000 70000000 /* pci mem space */ - fc000000 fc000000 00100000 /* EUMB */ - fe000000 fe000000 00c00000 /* pci i/o space */ - fec00000 fec00000 00300000 /* pci cfg regs */ - fef00000 fef00000 00100000>; /* pci iack */ + reg = <0x80000000 0x100000>; + ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */ + 0xfc000000 0xfc000000 0x100000 /* EUMB */ + 0xfe000000 0xfe000000 0xc00000 /* pci i/o space */ + 0xfec00000 0xfec00000 0x300000 /* pci cfg regs */ + 0xfef00000 0xfef00000 0x100000>; /* pci iack */ i2c@80003000 { #address-cells = <1>; #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <80003000 1000>; + reg = <0x80003000 0x1000>; interrupts = <5 2>; interrupt-parent = <&mpic>; rtc@32 { device_type = "rtc"; compatible = "ricoh,rs5c372a"; - reg = <32>; + reg = <0x32>; }; }; @@ -83,9 +86,9 @@ XXXX add flash parts, rtc, ?? cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <80004500 8>; - clock-frequency = <5d08d88>; - current-speed = <2580>; + reg = <0x80004500 0x8>; + clock-frequency = <97553800>; + current-speed = <9600>; interrupts = <9 0>; interrupt-parent = <&mpic>; }; @@ -94,10 +97,10 @@ XXXX add flash parts, rtc, ?? cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <80004600 8>; - clock-frequency = <5d08d88>; - current-speed = <e100>; - interrupts = <a 0>; + reg = <0x80004600 0x8>; + clock-frequency = <97553800>; + current-speed = <57600>; + interrupts = <10 0>; interrupt-parent = <&mpic>; }; @@ -107,7 +110,7 @@ XXXX add flash parts, rtc, ?? device_type = "open-pic"; compatible = "chrp,open-pic"; interrupt-controller; - reg = <80040000 40000>; + reg = <0x80040000 0x40000>; }; pci0: pci@fec00000 { @@ -116,29 +119,29 @@ XXXX add flash parts, rtc, ?? #interrupt-cells = <1>; device_type = "pci"; compatible = "mpc10x-pci"; - reg = <fec00000 400000>; - ranges = <01000000 0 0 fe000000 0 00c00000 - 02000000 0 80000000 80000000 0 70000000>; - bus-range = <0 ff>; - clock-frequency = <7f28155>; + reg = <0xfec00000 0x400000>; + ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000 + 0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>; + bus-range = <0 255>; + clock-frequency = <133333333>; interrupt-parent = <&mpic>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 11 - IRQ0 ETH */ - 5800 0 0 1 &mpic 0 1 - 5800 0 0 2 &mpic 1 1 - 5800 0 0 3 &mpic 2 1 - 5800 0 0 4 &mpic 3 1 + 0x5800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x5800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x5800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x5800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 12 - IRQ1 IDE0 */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 0 1 + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 14 - IRQ3 USB2.0 */ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 3 1 - 7000 0 0 3 &mpic 3 1 - 7000 0 0 4 &mpic 3 1 + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x3 0x1 >; }; }; diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts index 8443c85b7b3..e4916e69ad3 100644 --- a/arch/powerpc/boot/dts/kuroboxHG.dts +++ b/arch/powerpc/boot/dts/kuroboxHG.dts @@ -7,6 +7,7 @@ * Based on sandpoint.dts * * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de> + * Copyright 2008 Freescale Semiconductor, Inc. * * This file is licensed under * the terms of the GNU General Public License version 2. This program @@ -17,6 +18,8 @@ XXXX add flash parts, rtc, ?? */ +/dts-v1/; + / { model = "KuroboxHG"; compatible = "linkstation"; @@ -35,19 +38,19 @@ XXXX add flash parts, rtc, ?? PowerPC,603e { /* Really 8241 */ device_type = "cpu"; - reg = <0>; - clock-frequency = <fdad680>; /* Fixed by bootloader */ - timebase-frequency = <1F04000>; /* Fixed by bootloader */ + reg = <0x0>; + clock-frequency = <266000000>; /* Fixed by bootloader */ + timebase-frequency = <32522240>; /* Fixed by bootloader */ bus-frequency = <0>; /* Fixed by bootloader */ /* Following required by dtc but not used */ - i-cache-size = <4000>; - d-cache-size = <4000>; + i-cache-size = <0x4000>; + d-cache-size = <0x4000>; }; }; memory { device_type = "memory"; - reg = <00000000 08000000>; + reg = <0x0 0x8000000>; }; soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ @@ -56,26 +59,26 @@ XXXX add flash parts, rtc, ?? device_type = "soc"; compatible = "mpc10x"; store-gathering = <0>; /* 0 == off, !0 == on */ - reg = <80000000 00100000>; - ranges = <80000000 80000000 70000000 /* pci mem space */ - fc000000 fc000000 00100000 /* EUMB */ - fe000000 fe000000 00c00000 /* pci i/o space */ - fec00000 fec00000 00300000 /* pci cfg regs */ - fef00000 fef00000 00100000>; /* pci iack */ + reg = <0x80000000 0x100000>; + ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */ + 0xfc000000 0xfc000000 0x100000 /* EUMB */ + 0xfe000000 0xfe000000 0xc00000 /* pci i/o space */ + 0xfec00000 0xfec00000 0x300000 /* pci cfg regs */ + 0xfef00000 0xfef00000 0x100000>; /* pci iack */ i2c@80003000 { #address-cells = <1>; #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <80003000 1000>; + reg = <0x80003000 0x1000>; interrupts = <5 2>; interrupt-parent = <&mpic>; rtc@32 { device_type = "rtc"; compatible = "ricoh,rs5c372a"; - reg = <32>; + reg = <0x32>; }; }; @@ -83,9 +86,9 @@ XXXX add flash parts, rtc, ?? cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <80004500 8>; - clock-frequency = <7c044a8>; - current-speed = <2580>; + reg = <0x80004500 0x8>; + clock-frequency = <130041000>; + current-speed = <9600>; interrupts = <9 0>; interrupt-parent = <&mpic>; }; @@ -94,10 +97,10 @@ XXXX add flash parts, rtc, ?? cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <80004600 8>; - clock-frequency = <7c044a8>; - current-speed = <e100>; - interrupts = <a 0>; + reg = <0x80004600 0x8>; + clock-frequency = <130041000>; + current-speed = <57600>; + interrupts = <10 0>; interrupt-parent = <&mpic>; }; @@ -107,7 +110,7 @@ XXXX add flash parts, rtc, ?? device_type = "open-pic"; compatible = "chrp,open-pic"; interrupt-controller; - reg = <80040000 40000>; + reg = <0x80040000 0x40000>; }; pci0: pci@fec00000 { @@ -116,29 +119,29 @@ XXXX add flash parts, rtc, ?? #interrupt-cells = <1>; device_type = "pci"; compatible = "mpc10x-pci"; - reg = <fec00000 400000>; - ranges = <01000000 0 0 fe000000 0 00c00000 - 02000000 0 80000000 80000000 0 70000000>; - bus-range = <0 ff>; - clock-frequency = <7f28155>; + reg = <0xfec00000 0x400000>; + ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000 + 0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>; + bus-range = <0 255>; + clock-frequency = <133333333>; interrupt-parent = <&mpic>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 11 - IRQ0 ETH */ - 5800 0 0 1 &mpic 0 1 - 5800 0 0 2 &mpic 1 1 - 5800 0 0 3 &mpic 2 1 - 5800 0 0 4 &mpic 3 1 + 0x5800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x5800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x5800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x5800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 12 - IRQ1 IDE0 */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 0 1 + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 14 - IRQ3 USB2.0 */ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 3 1 - 7000 0 0 3 &mpic 3 1 - 7000 0 0 4 &mpic 3 1 + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x3 0x1 >; }; }; diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts index 710c0116817..84cc5e72ddd 100644 --- a/arch/powerpc/boot/dts/makalu.dts +++ b/arch/powerpc/boot/dts/makalu.dts @@ -219,7 +219,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -247,7 +247,7 @@ mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts index 8fb54238743..4936349b87c 100644 --- a/arch/powerpc/boot/dts/mpc7448hpc2.dts +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -1,7 +1,7 @@ /* * MPC7448HPC2 (Taiga) board Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * 2006 Roy Zang <Roy Zang at freescale.com>. * * This program is free software; you can redistribute it and/or modify it @@ -10,6 +10,7 @@ * option) any later version. */ +/dts-v1/; / { model = "mpc7448hpc2"; @@ -23,11 +24,11 @@ PowerPC,7448@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K bytes - i-cache-size = <8000>; // L1, 32K bytes + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K bytes + i-cache-size = <0x8000>; // L1, 32K bytes timebase-frequency = <0>; // 33 MHz, from uboot clock-frequency = <0>; // From U-Boot bus-frequency = <0>; // From U-Boot @@ -36,7 +37,7 @@ memory { device_type = "memory"; - reg = <00000000 20000000 // DDR2 512M at 0 + reg = <0x0 0x20000000 // DDR2 512M at 0 >; }; @@ -44,14 +45,14 @@ #address-cells = <1>; #size-cells = <1>; device_type = "tsi-bridge"; - ranges = <00000000 c0000000 00010000>; - reg = <c0000000 00010000>; + ranges = <0x0 0xc0000000 0x10000>; + reg = <0xc0000000 0x10000>; bus-frequency = <0>; i2c@7000 { interrupt-parent = <&mpic>; - interrupts = <E 0>; - reg = <7000 400>; + interrupts = <14 0>; + reg = <0x7000 0x400>; device_type = "i2c"; compatible = "tsi108-i2c"; }; @@ -59,20 +60,20 @@ MDIO: mdio@6000 { device_type = "mdio"; compatible = "tsi108-mdio"; - reg = <6000 50>; + reg = <0x6000 0x50>; #address-cells = <1>; #size-cells = <0>; phy8: ethernet-phy@8 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <8>; + reg = <0x8>; }; phy9: ethernet-phy@9 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <9>; + reg = <0x9>; }; }; @@ -82,9 +83,9 @@ #size-cells = <0>; device_type = "network"; compatible = "tsi108-ethernet"; - reg = <6000 200>; + reg = <0x6000 0x200>; address = [ 00 06 D2 00 00 01 ]; - interrupts = <10 2>; + interrupts = <16 2>; interrupt-parent = <&mpic>; mdio-handle = <&MDIO>; phy-handle = <&phy8>; @@ -96,9 +97,9 @@ #size-cells = <0>; device_type = "network"; compatible = "tsi108-ethernet"; - reg = <6400 200>; + reg = <0x6400 0x200>; address = [ 00 06 D2 00 00 02 ]; - interrupts = <11 2>; + interrupts = <17 2>; interrupt-parent = <&mpic>; mdio-handle = <&MDIO>; phy-handle = <&phy9>; @@ -107,18 +108,18 @@ serial@7808 { device_type = "serial"; compatible = "ns16550"; - reg = <7808 200>; - clock-frequency = <3f6b5a00>; - interrupts = <c 0>; + reg = <0x7808 0x200>; + clock-frequency = <1064000000>; + interrupts = <12 0>; interrupt-parent = <&mpic>; }; serial@7c08 { device_type = "serial"; compatible = "ns16550"; - reg = <7c08 200>; - clock-frequency = <3f6b5a00>; - interrupts = <d 0>; + reg = <0x7c08 0x200>; + clock-frequency = <1064000000>; + interrupts = <13 0>; interrupt-parent = <&mpic>; }; @@ -127,7 +128,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <7400 400>; + reg = <0x7400 0x400>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -138,39 +139,39 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <1000 1000>; + reg = <0x1000 0x1000>; bus-range = <0 0>; - ranges = <02000000 0 e0000000 e0000000 0 1A000000 - 01000000 0 00000000 fa000000 0 00010000>; - clock-frequency = <7f28154>; + ranges = <0x2000000 0x0 0xe0000000 0xe0000000 0x0 0x1a000000 + 0x1000000 0x0 0x0 0xfa000000 0x0 0x10000>; + clock-frequency = <133333332>; interrupt-parent = <&mpic>; - interrupts = <17 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <23 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 */ - 0800 0 0 1 &RT0 24 0 - 0800 0 0 2 &RT0 25 0 - 0800 0 0 3 &RT0 26 0 - 0800 0 0 4 &RT0 27 0 + 0x800 0x0 0x0 0x1 &RT0 0x24 0x0 + 0x800 0x0 0x0 0x2 &RT0 0x25 0x0 + 0x800 0x0 0x0 0x3 &RT0 0x26 0x0 + 0x800 0x0 0x0 0x4 &RT0 0x27 0x0 /* IDSEL 0x12 */ - 1000 0 0 1 &RT0 25 0 - 1000 0 0 2 &RT0 26 0 - 1000 0 0 3 &RT0 27 0 - 1000 0 0 4 &RT0 24 0 + 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0 + 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0 + 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0 + 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0 /* IDSEL 0x13 */ - 1800 0 0 1 &RT0 26 0 - 1800 0 0 2 &RT0 27 0 - 1800 0 0 3 &RT0 24 0 - 1800 0 0 4 &RT0 25 0 + 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0 + 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0 + 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0 + 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0 /* IDSEL 0x14 */ - 2000 0 0 1 &RT0 27 0 - 2000 0 0 2 &RT0 24 0 - 2000 0 0 3 &RT0 25 0 - 2000 0 0 4 &RT0 26 0 + 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0 + 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0 + 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0 + 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0 >; RT0: router@1180 { @@ -180,7 +181,7 @@ #address-cells = <0>; #interrupt-cells = <2>; big-endian; - interrupts = <17 2>; + interrupts = <23 2>; interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 7285ca1325f..46e2da30c3d 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -1,7 +1,7 @@ /* * MPC8272 ADS Device Tree Source * - * Copyright 2005 Freescale Semiconductor Inc. + * Copyright 2005,2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,8 @@ * option) any later version. */ +/dts-v1/; + / { model = "MPC8272ADS"; compatible = "fsl,mpc8272ads"; @@ -21,11 +23,11 @@ PowerPC,8272@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <d#32>; - i-cache-line-size = <d#32>; - d-cache-size = <d#16384>; - i-cache-size = <d#16384>; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -34,7 +36,7 @@ memory { device_type = "memory"; - reg = <0 0>; + reg = <0x0 0x0>; }; localbus@f0010100 { @@ -42,21 +44,21 @@ "fsl,pq2-localbus"; #address-cells = <2>; #size-cells = <1>; - reg = <f0010100 40>; + reg = <0xf0010100 0x40>; - ranges = <0 0 fe000000 02000000 - 1 0 f4500000 00008000 - 3 0 f8200000 00008000>; + ranges = <0x0 0x0 0xfe000000 0x2000000 + 0x1 0x0 0xf4500000 0x8000 + 0x3 0x0 0xf8200000 0x8000>; flash@0,0 { compatible = "jedec-flash"; - reg = <0 0 2000000>; + reg = <0x0 0x0 0x2000000>; bank-width = <4>; device-width = <1>; }; board-control@1,0 { - reg = <1 0 20>; + reg = <0x1 0x0 0x20>; compatible = "fsl,mpc8272ads-bcsr"; }; @@ -65,46 +67,46 @@ "fsl,pq2ads-pci-pic"; #interrupt-cells = <1>; interrupt-controller; - reg = <3 0 8>; + reg = <0x3 0x0 0x8>; interrupt-parent = <&PIC>; - interrupts = <14 8>; + interrupts = <20 8>; }; }; pci@f0010800 { device_type = "pci"; - reg = <f0010800 10c f00101ac 8 f00101c4 8>; + reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>; compatible = "fsl,mpc8272-pci", "fsl,pq2-pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - clock-frequency = <d#66666666>; - interrupt-map-mask = <f800 0 0 7>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x16 */ - b000 0 0 1 &PCI_PIC 0 - b000 0 0 2 &PCI_PIC 1 - b000 0 0 3 &PCI_PIC 2 - b000 0 0 4 &PCI_PIC 3 + 0xb000 0x0 0x0 0x1 &PCI_PIC 0 + 0xb000 0x0 0x0 0x2 &PCI_PIC 1 + 0xb000 0x0 0x0 0x3 &PCI_PIC 2 + 0xb000 0x0 0x0 0x4 &PCI_PIC 3 /* IDSEL 0x17 */ - b800 0 0 1 &PCI_PIC 4 - b800 0 0 2 &PCI_PIC 5 - b800 0 0 3 &PCI_PIC 6 - b800 0 0 4 &PCI_PIC 7 + 0xb800 0x0 0x0 0x1 &PCI_PIC 4 + 0xb800 0x0 0x0 0x2 &PCI_PIC 5 + 0xb800 0x0 0x0 0x3 &PCI_PIC 6 + 0xb800 0x0 0x0 0x4 &PCI_PIC 7 /* IDSEL 0x18 */ - c000 0 0 1 &PCI_PIC 8 - c000 0 0 2 &PCI_PIC 9 - c000 0 0 3 &PCI_PIC a - c000 0 0 4 &PCI_PIC b>; + 0xc000 0x0 0x0 0x1 &PCI_PIC 8 + 0xc000 0x0 0x0 0x2 &PCI_PIC 9 + 0xc000 0x0 0x0 0x3 &PCI_PIC 10 + 0xc000 0x0 0x0 0x4 &PCI_PIC 11>; interrupt-parent = <&PIC>; - interrupts = <12 8>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 f6000000 0 02000000>; + interrupts = <18 8>; + ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>; }; soc@f0000000 { @@ -112,26 +114,26 @@ #size-cells = <1>; device_type = "soc"; compatible = "fsl,mpc8272", "fsl,pq2-soc"; - ranges = <00000000 f0000000 00053000>; + ranges = <0x0 0xf0000000 0x53000>; // Temporary -- will go away once kernel uses ranges for get_immrbase(). - reg = <f0000000 00053000>; + reg = <0xf0000000 0x53000>; cpm@119c0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8272-cpm", "fsl,cpm2"; - reg = <119c0 30>; + reg = <0x119c0 0x30>; ranges; muram@0 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 10000>; + ranges = <0x0 0x0 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 2000 9800 800>; + reg = <0x0 0x2000 0x9800 0x800>; }; }; @@ -139,29 +141,29 @@ compatible = "fsl,mpc8272-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; - reg = <119f0 10 115f0 10>; + reg = <0x119f0 0x10 0x115f0 0x10>; }; serial@11a00 { device_type = "serial"; compatible = "fsl,mpc8272-scc-uart", "fsl,cpm2-scc-uart"; - reg = <11a00 20 8000 100>; - interrupts = <28 8>; + reg = <0x11a00 0x20 0x8000 0x100>; + interrupts = <40 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <1>; - fsl,cpm-command = <00800000>; + fsl,cpm-command = <0x800000>; }; serial@11a60 { device_type = "serial"; compatible = "fsl,mpc8272-scc-uart", "fsl,cpm2-scc-uart"; - reg = <11a60 20 8300 100>; - interrupts = <2b 8>; + reg = <0x11a60 0x20 0x8300 0x100>; + interrupts = <43 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <4>; - fsl,cpm-command = <0ce00000>; + fsl,cpm-command = <0xce00000>; }; mdio@10d40 { @@ -169,23 +171,23 @@ compatible = "fsl,mpc8272ads-mdio-bitbang", "fsl,mpc8272-mdio-bitbang", "fsl,cpm2-mdio-bitbang"; - reg = <10d40 14>; + reg = <0x10d40 0x14>; #address-cells = <1>; #size-cells = <0>; - fsl,mdio-pin = <12>; - fsl,mdc-pin = <13>; + fsl,mdio-pin = <18>; + fsl,mdc-pin = <19>; PHY0: ethernet-phy@0 { interrupt-parent = <&PIC>; - interrupts = <17 8>; - reg = <0>; + interrupts = <23 8>; + reg = <0x0>; device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { interrupt-parent = <&PIC>; - interrupts = <17 8>; - reg = <3>; + interrupts = <23 8>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -194,33 +196,33 @@ device_type = "network"; compatible = "fsl,mpc8272-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <11300 20 8400 100 11390 1>; + reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <20 8>; + interrupts = <32 8>; interrupt-parent = <&PIC>; phy-handle = <&PHY0>; linux,network-index = <0>; - fsl,cpm-command = <12000300>; + fsl,cpm-command = <0x12000300>; }; ethernet@11320 { device_type = "network"; compatible = "fsl,mpc8272-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <11320 20 8500 100 113b0 1>; + reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <21 8>; + interrupts = <33 8>; interrupt-parent = <&PIC>; phy-handle = <&PHY1>; linux,network-index = <1>; - fsl,cpm-command = <16200300>; + fsl,cpm-command = <0x16200300>; }; }; PIC: interrupt-controller@10c00 { #interrupt-cells = <2>; interrupt-controller; - reg = <10c00 80>; + reg = <0x10c00 0x80>; compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic"; }; @@ -232,14 +234,14 @@ "fsl,talitos-sec2", "fsl,talitos", "talitos"; - reg = <30000 10000>; - interrupts = <b 8>; + reg = <0x30000 0x10000>; + interrupts = <11 8>; interrupt-parent = <&PIC>; num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; + channel-fifo-len = <24>; + exec-units-mask = <0x7e>; /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ - descriptor-types-mask = <01010ebf>; + descriptor-types-mask = <0x1010ebf>; }; }; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 9bb408371bc..539e02fb352 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -255,9 +255,7 @@ enet0: ucc@2200 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <3>; - device-id = <3>; reg = <0x2200 0x200>; interrupts = <34>; interrupt-parent = <&qeic>; @@ -271,9 +269,7 @@ enet1: ucc@3200 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <4>; - device-id = <4>; reg = <0x3200 0x200>; interrupts = <35>; interrupt-parent = <&qeic>; @@ -287,8 +283,7 @@ ucc@2400 { device_type = "serial"; compatible = "ucc_uart"; - model = "UCC"; - device-id = <5>; /* The UCC number, 1-7*/ + cell-index = <5>; /* The UCC number, 1-7*/ port-number = <0>; /* Which ttyQEx device */ soft-uart; /* We need Soft-UART */ reg = <0x2400 0x200>; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index 94f93d209de..179c81c6a7a 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -208,9 +208,7 @@ enet0: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <2>; - device-id = <2>; reg = <0x3000 0x200>; interrupts = <33>; interrupt-parent = <&qeic>; @@ -224,9 +222,7 @@ enet1: ucc@2200 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <3>; - device-id = <3>; reg = <0x2200 0x200>; interrupts = <34>; interrupt-parent = <&qeic>; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 55f03e8dc97..8160ff24e87 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -257,9 +257,7 @@ enet0: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <1>; - device-id = <1>; reg = <0x2000 0x200>; interrupts = <32>; interrupt-parent = <&qeic>; @@ -274,9 +272,7 @@ enet1: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <2>; - device-id = <2>; reg = <0x3000 0x200>; interrupts = <33>; interrupt-parent = <&qeic>; diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 975248491b7..18033ed0b53 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -1,7 +1,7 @@ /* * MPC8540 ADS Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8540ADS"; @@ -31,11 +32,11 @@ PowerPC,8540@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot @@ -44,31 +45,31 @@ memory { device_type = "memory"; - reg = <00000000 08000000>; // 128M at 0x0 + reg = <0x0 0x8000000>; // 128M at 0x0 }; soc8540@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00100000>; // CCSRBAR 1M + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x100000>; // CCSRBAR 1M bus-frequency = <0>; memory-controller@2000 { compatible = "fsl,8540-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8540-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <40000>; // L2, 256K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -76,8 +77,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -86,24 +87,24 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <7 1>; - reg = <3>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -113,9 +114,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -125,9 +126,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -137,9 +138,9 @@ device_type = "network"; model = "FEC"; compatible = "gianfar"; - reg = <26000 1000>; + reg = <0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2>; + interrupts = <41 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; @@ -148,9 +149,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; // reg base, size + reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -158,9 +159,9 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; // reg base, size + reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; mpic: pic@40000 { @@ -168,7 +169,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -177,90 +178,90 @@ pci0: pci@e0008000 { cell-index = <0>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x02 */ - 1000 0 0 1 &mpic 1 1 - 1000 0 0 2 &mpic 2 1 - 1000 0 0 3 &mpic 3 1 - 1000 0 0 4 &mpic 4 1 + 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 0x03 */ - 1800 0 0 1 &mpic 4 1 - 1800 0 0 2 &mpic 1 1 - 1800 0 0 3 &mpic 2 1 - 1800 0 0 4 &mpic 3 1 + 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x04 */ - 2000 0 0 1 &mpic 3 1 - 2000 0 0 2 &mpic 4 1 - 2000 0 0 3 &mpic 1 1 - 2000 0 0 4 &mpic 2 1 + 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x05 */ - 2800 0 0 1 &mpic 2 1 - 2800 0 0 2 &mpic 3 1 - 2800 0 0 3 &mpic 4 1 - 2800 0 0 4 &mpic 1 1 + 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x0c */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 4 1 + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 0x0d */ - 6800 0 0 1 &mpic 4 1 - 6800 0 0 2 &mpic 1 1 - 6800 0 0 3 &mpic 2 1 - 6800 0 0 4 &mpic 3 1 + 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x0e */ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 4 1 - 7000 0 0 3 &mpic 1 1 - 7000 0 0 4 &mpic 2 1 + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x0f */ - 7800 0 0 1 &mpic 2 1 - 7800 0 0 2 &mpic 3 1 - 7800 0 0 3 &mpic 4 1 - 7800 0 0 4 &mpic 1 1 + 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x12 */ - 9000 0 0 1 &mpic 1 1 - 9000 0 0 2 &mpic 2 1 - 9000 0 0 3 &mpic 3 1 - 9000 0 0 4 &mpic 4 1 + 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 0x13 */ - 9800 0 0 1 &mpic 4 1 - 9800 0 0 2 &mpic 1 1 - 9800 0 0 3 &mpic 2 1 - 9800 0 0 4 &mpic 3 1 + 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x14 */ - a000 0 0 1 &mpic 3 1 - a000 0 0 2 &mpic 4 1 - a000 0 0 3 &mpic 1 1 - a000 0 0 4 &mpic 2 1 + 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x15 */ - a800 0 0 1 &mpic 2 1 - a800 0 0 2 &mpic 3 1 - a800 0 0 3 &mpic 4 1 - a800 0 0 4 &mpic 1 1>; + 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; + interrupts = <24 2>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index fa8d9aaad15..663c7c50ca4 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -1,7 +1,7 @@ /* * MPC8541 CDS Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8541CDS"; @@ -31,11 +32,11 @@ PowerPC,8541@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot @@ -44,31 +45,31 @@ memory { device_type = "memory"; - reg = <00000000 08000000>; // 128M at 0x0 + reg = <0x0 0x8000000>; // 128M at 0x0 }; soc8541@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00001000>; // CCSRBAR 1M + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; memory-controller@2000 { compatible = "fsl,8541-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8541-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <40000>; // L2, 256K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -76,8 +77,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -86,18 +87,18 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; }; @@ -107,9 +108,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -119,9 +120,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -130,9 +131,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; // reg base, size + reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -140,9 +141,9 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; // reg base, size + reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -151,7 +152,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -161,17 +162,17 @@ #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8541-cpm", "fsl,cpm2"; - reg = <919c0 30>; + reg = <0x919c0 0x30>; ranges; muram@80000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 80000 10000>; + ranges = <0x0 0x80000 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 2000 9000 1000>; + reg = <0x0 0x2000 0x9000 0x1000>; }; }; @@ -179,16 +180,16 @@ compatible = "fsl,mpc8541-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; - reg = <919f0 10 915f0 10>; + reg = <0x919f0 0x10 0x915f0 0x10>; }; cpmpic: pic@90c00 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - interrupts = <2e 2>; + interrupts = <46 2>; interrupt-parent = <&mpic>; - reg = <90c00 80>; + reg = <0x90c00 0x80>; compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic"; }; }; @@ -196,68 +197,68 @@ pci0: pci@e0008000 { cell-index = <0>; - interrupt-map-mask = <1f800 0 0 7>; + interrupt-map-mask = <0x1f800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 0 1 - 08000 0 0 2 &mpic 1 1 - 08000 0 0 3 &mpic 2 1 - 08000 0 0 4 &mpic 3 1 + 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 0 1 - 08800 0 0 2 &mpic 1 1 - 08800 0 0 3 &mpic 2 1 - 08800 0 0 4 &mpic 3 1 + 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 0 1 - 09000 0 0 2 &mpic 1 1 - 09000 0 0 3 &mpic 2 1 - 09000 0 0 4 &mpic 3 1 + 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 1 1 - 09800 0 0 2 &mpic 2 1 - 09800 0 0 3 &mpic 3 1 - 09800 0 0 4 &mpic 0 1 + 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 2 1 - 0a000 0 0 2 &mpic 3 1 - 0a000 0 0 3 &mpic 0 1 - 0a000 0 0 4 &mpic 1 1 + 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 3 1 - 0a800 0 0 2 &mpic 0 1 - 0a800 0 0 3 &mpic 1 1 - 0a800 0 0 4 &mpic 2 1 + 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 0 1 - 19000 0 0 2 &mpic 1 1 - 19000 0 0 3 &mpic 2 1 - 19000 0 0 4 &mpic 3 1>; + 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; + interrupts = <24 2>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; i8259@19000 { interrupt-controller; device_type = "interrupt-controller"; - reg = <19000 0 0 0 1>; + reg = <0x19000 0x0 0x0 0x0 0x1>; #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; @@ -268,24 +269,24 @@ pci1: pci@e0009000 { cell-index = <1>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic b 1 - a800 0 0 3 &mpic b 1 - a800 0 0 4 &mpic b 1>; + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>; interrupt-parent = <&mpic>; - interrupts = <19 2>; + interrupts = <25 2>; bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0009000 1000>; + reg = <0xe0009000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 688af9d0638..6a0d8db96d9 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -1,7 +1,7 @@ /* * MPC8544 DS Device Tree Source * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2007, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8544DS"; compatible = "MPC8544DS", "MPC85xxDS"; @@ -27,17 +28,16 @@ }; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; PowerPC,8544@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -46,7 +46,7 @@ memory { device_type = "memory"; - reg = <00000000 00000000>; // Filled by U-Boot + reg = <0x0 0x0>; // Filled by U-Boot }; soc8544@e0000000 { @@ -54,24 +54,24 @@ #size-cells = <1>; device_type = "soc"; - ranges = <00000000 e0000000 00100000>; - reg = <e0000000 00001000>; // CCSRBAR 1M + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; // Filled out by uboot. memory-controller@2000 { compatible = "fsl,8544-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8544-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <40000>; // L2, 256K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -79,8 +79,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -90,8 +90,8 @@ #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <2b 2>; + reg = <0x3100 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -100,30 +100,71 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <0>; + interrupts = <10 1>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <1>; + interrupts = <10 1>; + reg = <0x1>; device_type = "ethernet-phy"; }; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8544-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8544-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8544-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8544-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + enet0: ethernet@24000 { cell-index = <0>; device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; @@ -134,9 +175,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <26000 1000>; + reg = <0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1f 2 20 2 21 2>; + interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; @@ -146,9 +187,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -156,15 +197,15 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; global-utilities@e0000 { //global utilities block compatible = "fsl,mpc8548-guts"; - reg = <e0000 1000>; + reg = <0xe0000 0x1000>; fsl,has-rstcr; }; @@ -173,7 +214,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -184,32 +225,32 @@ cell-index = <0>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 J17 Slot 1 */ - 8800 0 0 1 &mpic 2 1 - 8800 0 0 2 &mpic 3 1 - 8800 0 0 3 &mpic 4 1 - 8800 0 0 4 &mpic 1 1 + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x12 J16 Slot 2 */ - 9000 0 0 1 &mpic 3 1 - 9000 0 0 2 &mpic 4 1 - 9000 0 0 3 &mpic 2 1 - 9000 0 0 4 &mpic 1 1>; + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 ff>; - ranges = <02000000 0 c0000000 c0000000 0 20000000 - 01000000 0 00000000 e1000000 0 00010000>; - clock-frequency = <3f940aa>; + interrupts = <24 2>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; }; pci1: pcie@e0009000 { @@ -219,33 +260,33 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0009000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e1010000 0 00010000>; - clock-frequency = <1fca055>; + reg = <0xe0009000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <1a 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00010000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; }; }; @@ -256,33 +297,33 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e000a000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 e1020000 0 00010000>; - clock-frequency = <1fca055>; + reg = <0xe000a000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <19 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 a0000000 - 02000000 0 a0000000 - 0 10000000 + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x10000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00010000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; }; }; @@ -293,72 +334,72 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e000b000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 b0000000 b0000000 0 00100000 - 01000000 0 00000000 b0100000 0 00100000>; - clock-frequency = <1fca055>; + reg = <0xe000b000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000 + 0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <1b 2>; - interrupt-map-mask = <ff00 0 0 1>; + interrupts = <27 2>; + interrupt-map-mask = <0xff00 0x0 0x0 0x1>; interrupt-map = < // IDSEL 0x1c USB - e000 0 0 1 &i8259 c 2 - e100 0 0 2 &i8259 9 2 - e200 0 0 3 &i8259 a 2 - e300 0 0 4 &i8259 b 2 + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 // IDSEL 0x1d Audio - e800 0 0 1 &i8259 6 2 + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 // IDSEL 0x1e Legacy - f000 0 0 1 &i8259 7 2 - f100 0 0 1 &i8259 7 2 + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 // IDSEL 0x1f IDE/SATA - f800 0 0 1 &i8259 e 2 - f900 0 0 1 &i8259 5 2 + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 b0000000 - 02000000 0 b0000000 - 0 00100000 + ranges = <0x2000000 0x0 0xb0000000 + 0x2000000 0x0 0xb0000000 + 0x0 0x100000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; uli1575@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; - ranges = <02000000 0 b0000000 - 02000000 0 b0000000 - 0 00100000 + ranges = <0x2000000 0x0 0xb0000000 + 0x2000000 0x0 0xb0000000 + 0x0 0x100000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; isa@1e { device_type = "isa"; #interrupt-cells = <2>; #size-cells = <1>; #address-cells = <2>; - reg = <f000 0 0 0 0>; - ranges = <1 0 - 01000000 0 0 - 00001000>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 + 0x1000000 0x0 0x0 + 0x1000>; interrupt-parent = <&i8259>; i8259: interrupt-controller@20 { - reg = <1 20 2 - 1 a0 2 - 1 4d0 2>; + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; interrupt-controller; device_type = "interrupt-controller"; #address-cells = <0>; @@ -371,28 +412,28 @@ i8042@60 { #size-cells = <0>; #address-cells = <1>; - reg = <1 60 1 1 64 1>; - interrupts = <1 3 c 3>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; interrupt-parent = <&i8259>; keyboard@0 { - reg = <0>; + reg = <0x0>; compatible = "pnpPNP,303"; }; mouse@1 { - reg = <1>; + reg = <0x1>; compatible = "pnpPNP,f03"; }; }; rtc@70 { compatible = "pnpPNP,b00"; - reg = <1 70 2>; + reg = <0x1 0x70 0x2>; }; gpio@400 { - reg = <1 400 80>; + reg = <0x1 0x400 0x80>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 1f470c6a1c6..fa298a8c81c 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -1,7 +1,7 @@ /* * MPC8548 CDS Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8548CDS"; @@ -36,11 +37,11 @@ PowerPC,8548@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot @@ -49,31 +50,31 @@ memory { device_type = "memory"; - reg = <00000000 08000000>; // 128M at 0x0 + reg = <0x0 0x8000000>; // 128M at 0x0 }; soc8548@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <00000000 e0000000 00100000>; - reg = <e0000000 00001000>; // CCSRBAR + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x1000>; // CCSRBAR bus-frequency = <0>; memory-controller@2000 { compatible = "fsl,8548-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8548-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <80000>; // L2, 512K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -81,8 +82,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -92,8 +93,8 @@ #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <2b 2>; + reg = <0x3100 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -102,30 +103,30 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <2>; + reg = <0x2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <3>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -135,9 +136,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -147,9 +148,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -160,9 +161,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <26000 1000>; + reg = <0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1f 2 20 2 21 2>; + interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; }; @@ -172,9 +173,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <27000 1000>; + reg = <0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <25 2 26 2 27 2>; + interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; @@ -184,9 +185,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; // reg base, size + reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -194,15 +195,15 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; // reg base, size + reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; global-utilities@e0000 { //global utilities reg compatible = "fsl,mpc8548-guts"; - reg = <e0000 1000>; + reg = <0xe0000 0x1000>; fsl,has-rstcr; }; @@ -211,7 +212,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -220,139 +221,139 @@ pci0: pci@e0008000 { cell-index = <0>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x4 (PCIX Slot 2) */ - 02000 0 0 1 &mpic 0 1 - 02000 0 0 2 &mpic 1 1 - 02000 0 0 3 &mpic 2 1 - 02000 0 0 4 &mpic 3 1 + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x5 (PCIX Slot 3) */ - 02800 0 0 1 &mpic 1 1 - 02800 0 0 2 &mpic 2 1 - 02800 0 0 3 &mpic 3 1 - 02800 0 0 4 &mpic 0 1 + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 0x6 (PCIX Slot 4) */ - 03000 0 0 1 &mpic 2 1 - 03000 0 0 2 &mpic 3 1 - 03000 0 0 3 &mpic 0 1 - 03000 0 0 4 &mpic 1 1 + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x8 (PCIX Slot 5) */ - 04000 0 0 1 &mpic 0 1 - 04000 0 0 2 &mpic 1 1 - 04000 0 0 3 &mpic 2 1 - 04000 0 0 4 &mpic 3 1 + 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0xC (Tsi310 bridge) */ - 06000 0 0 1 &mpic 0 1 - 06000 0 0 2 &mpic 1 1 - 06000 0 0 3 &mpic 2 1 - 06000 0 0 4 &mpic 3 1 + 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x14 (Slot 2) */ - 0a000 0 0 1 &mpic 0 1 - 0a000 0 0 2 &mpic 1 1 - 0a000 0 0 3 &mpic 2 1 - 0a000 0 0 4 &mpic 3 1 + 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x15 (Slot 3) */ - 0a800 0 0 1 &mpic 1 1 - 0a800 0 0 2 &mpic 2 1 - 0a800 0 0 3 &mpic 3 1 - 0a800 0 0 4 &mpic 0 1 + 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 0x16 (Slot 4) */ - 0b000 0 0 1 &mpic 2 1 - 0b000 0 0 2 &mpic 3 1 - 0b000 0 0 3 &mpic 0 1 - 0b000 0 0 4 &mpic 1 1 + 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x18 (Slot 5) */ - 0c000 0 0 1 &mpic 0 1 - 0c000 0 0 2 &mpic 1 1 - 0c000 0 0 3 &mpic 2 1 - 0c000 0 0 4 &mpic 3 1 + 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ - 0E000 0 0 1 &mpic 0 1 - 0E000 0 0 2 &mpic 1 1 - 0E000 0 0 3 &mpic 2 1 - 0E000 0 0 4 &mpic 3 1>; + 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; + interrupts = <24 2>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00800000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; device_type = "pci"; pci_bridge@1c { - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x00 (PrPMC Site) */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x04 (VIA chip) */ - 2000 0 0 1 &mpic 0 1 - 2000 0 0 2 &mpic 1 1 - 2000 0 0 3 &mpic 2 1 - 2000 0 0 4 &mpic 3 1 + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x05 (8139) */ - 2800 0 0 1 &mpic 1 1 + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 /* IDSEL 0x06 (Slot 6) */ - 3000 0 0 1 &mpic 2 1 - 3000 0 0 2 &mpic 3 1 - 3000 0 0 3 &mpic 0 1 - 3000 0 0 4 &mpic 1 1 + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDESL 0x07 (Slot 7) */ - 3800 0 0 1 &mpic 3 1 - 3800 0 0 2 &mpic 0 1 - 3800 0 0 3 &mpic 1 1 - 3800 0 0 4 &mpic 2 1>; + 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>; - reg = <e000 0 0 0 0>; + reg = <0xe000 0x0 0x0 0x0 0x0>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00080000>; - clock-frequency = <1fca055>; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x80000>; + clock-frequency = <33333333>; isa@4 { device_type = "isa"; #interrupt-cells = <2>; #size-cells = <1>; #address-cells = <2>; - reg = <2000 0 0 0 0>; - ranges = <1 0 01000000 0 0 00001000>; + reg = <0x2000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>; interrupt-parent = <&i8259>; i8259: interrupt-controller@20 { interrupt-controller; device_type = "interrupt-controller"; - reg = <1 20 2 - 1 a0 2 - 1 4d0 2>; + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; @@ -362,7 +363,7 @@ rtc@70 { compatible = "pnpPNP,b00"; - reg = <1 70 2>; + reg = <0x1 0x70 0x2>; }; }; }; @@ -370,64 +371,64 @@ pci1: pci@e0009000 { cell-index = <1>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic 1 1 - a800 0 0 3 &mpic 2 1 - a800 0 0 4 &mpic 3 1>; + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <19 2>; + interrupts = <25 2>; bus-range = <0 0>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 e2800000 0 00800000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0009000 1000>; + reg = <0xe0009000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; }; pci2: pcie@e000a000 { cell-index = <2>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 (PEX) */ - 00000 0 0 1 &mpic 0 1 - 00000 0 0 2 &mpic 1 1 - 00000 0 0 3 &mpic 2 1 - 00000 0 0 4 &mpic 3 1>; + 00000 0x0 0x0 0x1 &mpic 0x0 0x1 + 00000 0x0 0x0 0x2 &mpic 0x1 0x1 + 00000 0x0 0x0 0x3 &mpic 0x2 0x1 + 00000 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <1a 2>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 08000000>; - clock-frequency = <1fca055>; + interrupts = <26 2>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>; + clock-frequency = <33333333>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e000a000 1000>; + reg = <0xe000a000 0x1000>; compatible = "fsl,mpc8548-pcie"; device_type = "pci"; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 a0000000 - 02000000 0 a0000000 - 0 20000000 + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 08000000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x8000000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 4538f3c3886..b025c566c10 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -1,7 +1,7 @@ /* * MPC8555 CDS Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8555CDS"; @@ -31,11 +32,11 @@ PowerPC,8555@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot @@ -44,31 +45,31 @@ memory { device_type = "memory"; - reg = <00000000 08000000>; // 128M at 0x0 + reg = <0x0 0x8000000>; // 128M at 0x0 }; soc8555@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00001000>; // CCSRBAR 1M + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; memory-controller@2000 { compatible = "fsl,8555-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8555-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <40000>; // L2, 256K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -76,8 +77,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -86,18 +87,18 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; }; @@ -107,9 +108,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -119,9 +120,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -130,9 +131,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; // reg base, size + reg = <0x4500 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -140,9 +141,9 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; // reg base, size + reg = <0x4600 0x100>; // reg base, size clock-frequency = <0>; // should we fill in in uboot? - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -151,7 +152,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -161,17 +162,17 @@ #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8555-cpm", "fsl,cpm2"; - reg = <919c0 30>; + reg = <0x919c0 0x30>; ranges; muram@80000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 80000 10000>; + ranges = <0x0 0x80000 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 2000 9000 1000>; + reg = <0x0 0x2000 0x9000 0x1000>; }; }; @@ -179,16 +180,16 @@ compatible = "fsl,mpc8555-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; - reg = <919f0 10 915f0 10>; + reg = <0x919f0 0x10 0x915f0 0x10>; }; cpmpic: pic@90c00 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - interrupts = <2e 2>; + interrupts = <46 2>; interrupt-parent = <&mpic>; - reg = <90c00 80>; + reg = <0x90c00 0x80>; compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic"; }; }; @@ -196,68 +197,68 @@ pci0: pci@e0008000 { cell-index = <0>; - interrupt-map-mask = <1f800 0 0 7>; + interrupt-map-mask = <0x1f800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 0 1 - 08000 0 0 2 &mpic 1 1 - 08000 0 0 3 &mpic 2 1 - 08000 0 0 4 &mpic 3 1 + 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 0 1 - 08800 0 0 2 &mpic 1 1 - 08800 0 0 3 &mpic 2 1 - 08800 0 0 4 &mpic 3 1 + 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 0 1 - 09000 0 0 2 &mpic 1 1 - 09000 0 0 3 &mpic 2 1 - 09000 0 0 4 &mpic 3 1 + 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 1 1 - 09800 0 0 2 &mpic 2 1 - 09800 0 0 3 &mpic 3 1 - 09800 0 0 4 &mpic 0 1 + 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1 /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 2 1 - 0a000 0 0 2 &mpic 3 1 - 0a000 0 0 3 &mpic 0 1 - 0a000 0 0 4 &mpic 1 1 + 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 3 1 - 0a800 0 0 2 &mpic 0 1 - 0a800 0 0 3 &mpic 1 1 - 0a800 0 0 4 &mpic 2 1 + 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1 /* Bus 1 (Tundra Bridge) */ /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 0 1 - 19000 0 0 2 &mpic 1 1 - 19000 0 0 3 &mpic 2 1 - 19000 0 0 4 &mpic 3 1>; + 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; + interrupts = <24 2>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; i8259@19000 { interrupt-controller; device_type = "interrupt-controller"; - reg = <19000 0 0 0 1>; + reg = <0x19000 0x0 0x0 0x0 0x1>; #address-cells = <0>; #interrupt-cells = <2>; compatible = "chrp,iic"; @@ -268,24 +269,24 @@ pci1: pci@e0009000 { cell-index = <1>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x15 */ - a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic b 1 - a800 0 0 3 &mpic b 1 - a800 0 0 4 &mpic b 1>; + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>; interrupt-parent = <&mpic>; - interrupts = <19 2>; + interrupts = <25 2>; bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 00100000>; - clock-frequency = <3f940aa>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0009000 1000>; + reg = <0xe0009000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 639ce8a709a..0cc16ab305d 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -1,7 +1,7 @@ /* * MPC8560 ADS Device Tree Source * - * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2006, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC8560ADS"; @@ -32,74 +33,74 @@ PowerPC,8560@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K - timebase-frequency = <04ead9a0>; - bus-frequency = <13ab6680>; - clock-frequency = <312c8040>; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <82500000>; + bus-frequency = <330000000>; + clock-frequency = <825000000>; }; }; memory { device_type = "memory"; - reg = <00000000 10000000>; + reg = <0x0 0x10000000>; }; soc8560@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00000200>; - bus-frequency = <13ab6680>; + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x200>; + bus-frequency = <330000000>; memory-controller@2000 { compatible = "fsl,8540-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8540-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <40000>; // L2, 256K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; mdio@24520 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <7 1>; - reg = <2>; + reg = <0x2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <7 1>; - reg = <3>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -109,9 +110,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; }; @@ -121,9 +122,9 @@ device_type = "network"; model = "TSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; }; @@ -132,7 +133,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; device_type = "open-pic"; }; @@ -140,17 +141,17 @@ #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; - reg = <919c0 30>; + reg = <0x919c0 0x30>; ranges; muram@80000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 80000 10000>; + ranges = <0x0 0x80000 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 4000 9000 2000>; + reg = <0x0 0x4000 0x9000 0x2000>; }; }; @@ -158,17 +159,17 @@ compatible = "fsl,mpc8560-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; - reg = <919f0 10 915f0 10>; - clock-frequency = <d#165000000>; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <165000000>; }; cpmpic: pic@90c00 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - interrupts = <2e 2>; + interrupts = <46 2>; interrupt-parent = <&mpic>; - reg = <90c00 80>; + reg = <0x90c00 0x80>; compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; }; @@ -176,11 +177,11 @@ device_type = "serial"; compatible = "fsl,mpc8560-scc-uart", "fsl,cpm2-scc-uart"; - reg = <91a00 20 88000 100>; + reg = <0x91a00 0x20 0x88000 0x100>; fsl,cpm-brg = <1>; - fsl,cpm-command = <00800000>; - current-speed = <1c200>; - interrupts = <28 8>; + fsl,cpm-command = <0x800000>; + current-speed = <115200>; + interrupts = <40 8>; interrupt-parent = <&cpmpic>; }; @@ -188,11 +189,11 @@ device_type = "serial"; compatible = "fsl,mpc8560-scc-uart", "fsl,cpm2-scc-uart"; - reg = <91a20 20 88100 100>; + reg = <0x91a20 0x20 0x88100 0x100>; fsl,cpm-brg = <2>; - fsl,cpm-command = <04a00000>; - current-speed = <1c200>; - interrupts = <29 8>; + fsl,cpm-command = <0x4a00000>; + current-speed = <115200>; + interrupts = <41 8>; interrupt-parent = <&cpmpic>; }; @@ -200,10 +201,10 @@ device_type = "network"; compatible = "fsl,mpc8560-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <91320 20 88500 100 913b0 1>; + reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>; local-mac-address = [ 00 00 00 00 00 00 ]; - fsl,cpm-command = <16200300>; - interrupts = <21 8>; + fsl,cpm-command = <0x16200300>; + interrupts = <33 8>; interrupt-parent = <&cpmpic>; phy-handle = <&phy2>; }; @@ -212,10 +213,10 @@ device_type = "network"; compatible = "fsl,mpc8560-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <91340 20 88600 100 913d0 1>; + reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>; local-mac-address = [ 00 00 00 00 00 00 ]; - fsl,cpm-command = <1a400300>; - interrupts = <22 8>; + fsl,cpm-command = <0x1a400300>; + interrupts = <34 8>; interrupt-parent = <&cpmpic>; phy-handle = <&phy3>; }; @@ -229,87 +230,87 @@ #address-cells = <3>; compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; device_type = "pci"; - reg = <e0008000 1000>; - clock-frequency = <3f940aa>; - interrupt-map-mask = <f800 0 0 7>; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x2 */ - 1000 0 0 1 &mpic 1 1 - 1000 0 0 2 &mpic 2 1 - 1000 0 0 3 &mpic 3 1 - 1000 0 0 4 &mpic 4 1 + 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 0x3 */ - 1800 0 0 1 &mpic 4 1 - 1800 0 0 2 &mpic 1 1 - 1800 0 0 3 &mpic 2 1 - 1800 0 0 4 &mpic 3 1 + 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 0x4 */ - 2000 0 0 1 &mpic 3 1 - 2000 0 0 2 &mpic 4 1 - 2000 0 0 3 &mpic 1 1 - 2000 0 0 4 &mpic 2 1 + 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x5 */ - 2800 0 0 1 &mpic 2 1 - 2800 0 0 2 &mpic 3 1 - 2800 0 0 3 &mpic 4 1 - 2800 0 0 4 &mpic 1 1 + 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 12 */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 4 1 + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 13 */ - 6800 0 0 1 &mpic 4 1 - 6800 0 0 2 &mpic 1 1 - 6800 0 0 3 &mpic 2 1 - 6800 0 0 4 &mpic 3 1 + 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 14*/ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 4 1 - 7000 0 0 3 &mpic 1 1 - 7000 0 0 4 &mpic 2 1 + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 15 */ - 7800 0 0 1 &mpic 2 1 - 7800 0 0 2 &mpic 3 1 - 7800 0 0 3 &mpic 4 1 - 7800 0 0 4 &mpic 1 1 + 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 18 */ - 9000 0 0 1 &mpic 1 1 - 9000 0 0 2 &mpic 2 1 - 9000 0 0 3 &mpic 3 1 - 9000 0 0 4 &mpic 4 1 + 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 19 */ - 9800 0 0 1 &mpic 4 1 - 9800 0 0 2 &mpic 1 1 - 9800 0 0 3 &mpic 2 1 - 9800 0 0 4 &mpic 3 1 + 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1 /* IDSEL 20 */ - a000 0 0 1 &mpic 3 1 - a000 0 0 2 &mpic 4 1 - a000 0 0 3 &mpic 1 1 - a000 0 0 4 &mpic 2 1 + 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 21 */ - a800 0 0 1 &mpic 2 1 - a800 0 0 2 &mpic 3 1 - a800 0 0 3 &mpic 4 1 - a800 0 0 4 &mpic 1 1>; + 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; + interrupts = <24 2>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 01000000>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 97bc048f215..a025a8ededc 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -1,7 +1,7 @@ /* * MPC8568E MDS Device Tree Source * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2007, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,10 +9,7 @@ * option) any later version. */ - -/* -/memreserve/ 00000000 1000000; -*/ +/dts-v1/; / { model = "MPC8568EMDS"; @@ -37,11 +34,11 @@ PowerPC,8568@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -50,36 +47,36 @@ memory { device_type = "memory"; - reg = <00000000 10000000>; + reg = <0x0 0x10000000>; }; bcsr@f8000000 { device_type = "board-control"; - reg = <f8000000 8000>; + reg = <0xf8000000 0x8000>; }; soc8568@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00001000>; + ranges = <0x0 0xe0000000 0x100000>; + reg = <0xe0000000 0x1000>; bus-frequency = <0>; memory-controller@2000 { compatible = "fsl,8568-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,8568-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <80000>; // L2, 512K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -87,14 +84,14 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; rtc@68 { compatible = "dallas,ds1374"; - reg = <68>; + reg = <0x68>; }; }; @@ -103,8 +100,8 @@ #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <2b 2>; + reg = <0x3100 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -113,30 +110,30 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@7 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <7>; + reg = <0x7>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <2>; + reg = <0x2>; device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <3>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -146,9 +143,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; }; @@ -158,9 +155,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; }; @@ -169,15 +166,15 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; global-utilities@e0000 { //global utilities block compatible = "fsl,mpc8548-guts"; - reg = <e0000 1000>; + reg = <0xe0000 0x1000>; fsl,has-rstcr; }; @@ -185,9 +182,9 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -195,13 +192,13 @@ device_type = "crypto"; model = "SEC2"; compatible = "talitos"; - reg = <30000 f000>; - interrupts = <2d 2>; + reg = <0x30000 0xf000>; + interrupts = <45 2>; interrupt-parent = <&mpic>; num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <000000fe>; - descriptor-types-mask = <012b0ebf>; + channel-fifo-len = <24>; + exec-units-mask = <0xfe>; + descriptor-types-mask = <0x12b0ebf>; }; mpic: pic@40000 { @@ -209,73 +206,73 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; }; par_io@e0100 { - reg = <e0100 100>; + reg = <0xe0100 0x100>; device_type = "par_io"; num-ports = <7>; pio1: ucc_pin@01 { pio-map = < /* port pin dir open_drain assignment has_irq */ - 4 0a 1 0 2 0 /* TxD0 */ - 4 09 1 0 2 0 /* TxD1 */ - 4 08 1 0 2 0 /* TxD2 */ - 4 07 1 0 2 0 /* TxD3 */ - 4 17 1 0 2 0 /* TxD4 */ - 4 16 1 0 2 0 /* TxD5 */ - 4 15 1 0 2 0 /* TxD6 */ - 4 14 1 0 2 0 /* TxD7 */ - 4 0f 2 0 2 0 /* RxD0 */ - 4 0e 2 0 2 0 /* RxD1 */ - 4 0d 2 0 2 0 /* RxD2 */ - 4 0c 2 0 2 0 /* RxD3 */ - 4 1d 2 0 2 0 /* RxD4 */ - 4 1c 2 0 2 0 /* RxD5 */ - 4 1b 2 0 2 0 /* RxD6 */ - 4 1a 2 0 2 0 /* RxD7 */ - 4 0b 1 0 2 0 /* TX_EN */ - 4 18 1 0 2 0 /* TX_ER */ - 4 10 2 0 2 0 /* RX_DV */ - 4 1e 2 0 2 0 /* RX_ER */ - 4 11 2 0 2 0 /* RX_CLK */ - 4 13 1 0 2 0 /* GTX_CLK */ - 1 1f 2 0 3 0>; /* GTX125 */ + 0x4 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ + 0x4 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ + 0x4 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ + 0x4 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ + 0x4 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ + 0x4 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ + 0x4 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ + 0x4 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ + 0x4 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ + 0x4 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ + 0x4 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ + 0x4 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ + 0x4 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ + 0x4 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ + 0x4 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ + 0x4 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ + 0x4 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ + 0x4 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ + 0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ + 0x4 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ + 0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ + 0x4 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ + 0x1 0x1f 0x2 0x0 0x3 0x0>; /* GTX125 */ }; pio2: ucc_pin@02 { pio-map = < /* port pin dir open_drain assignment has_irq */ - 5 0a 1 0 2 0 /* TxD0 */ - 5 09 1 0 2 0 /* TxD1 */ - 5 08 1 0 2 0 /* TxD2 */ - 5 07 1 0 2 0 /* TxD3 */ - 5 17 1 0 2 0 /* TxD4 */ - 5 16 1 0 2 0 /* TxD5 */ - 5 15 1 0 2 0 /* TxD6 */ - 5 14 1 0 2 0 /* TxD7 */ - 5 0f 2 0 2 0 /* RxD0 */ - 5 0e 2 0 2 0 /* RxD1 */ - 5 0d 2 0 2 0 /* RxD2 */ - 5 0c 2 0 2 0 /* RxD3 */ - 5 1d 2 0 2 0 /* RxD4 */ - 5 1c 2 0 2 0 /* RxD5 */ - 5 1b 2 0 2 0 /* RxD6 */ - 5 1a 2 0 2 0 /* RxD7 */ - 5 0b 1 0 2 0 /* TX_EN */ - 5 18 1 0 2 0 /* TX_ER */ - 5 10 2 0 2 0 /* RX_DV */ - 5 1e 2 0 2 0 /* RX_ER */ - 5 11 2 0 2 0 /* RX_CLK */ - 5 13 1 0 2 0 /* GTX_CLK */ - 1 1f 2 0 3 0 /* GTX125 */ - 4 06 3 0 2 0 /* MDIO */ - 4 05 1 0 2 0>; /* MDC */ + 0x5 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ + 0x5 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ + 0x5 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ + 0x5 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ + 0x5 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ + 0x5 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ + 0x5 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ + 0x5 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ + 0x5 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ + 0x5 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ + 0x5 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ + 0x5 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ + 0x5 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ + 0x5 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ + 0x5 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ + 0x5 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ + 0x5 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ + 0x5 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ + 0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ + 0x5 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ + 0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ + 0x5 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ + 0x1 0x1f 0x2 0x0 0x3 0x0 /* GTX125 */ + 0x4 0x6 0x3 0x0 0x2 0x0 /* MDIO */ + 0x4 0x5 0x1 0x0 0x2 0x0>; /* MDC */ }; }; }; @@ -285,28 +282,28 @@ #size-cells = <1>; device_type = "qe"; compatible = "fsl,qe"; - ranges = <0 e0080000 00040000>; - reg = <e0080000 480>; + ranges = <0x0 0xe0080000 0x40000>; + reg = <0xe0080000 0x480>; brg-frequency = <0>; - bus-frequency = <179A7B00>; + bus-frequency = <396000000>; muram@10000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,qe-muram", "fsl,cpm-muram"; - ranges = <0 00010000 0000c000>; + ranges = <0x0 0x10000 0x10000>; data-only@0 { compatible = "fsl,qe-muram-data", "fsl,cpm-muram-data"; - reg = <0 c000>; + reg = <0x0 0x10000>; }; }; spi@4c0 { cell-index = <0>; compatible = "fsl,spi"; - reg = <4c0 40>; + reg = <0x4c0 0x40>; interrupts = <2>; interrupt-parent = <&qeic>; mode = "cpu"; @@ -315,7 +312,7 @@ spi@500 { cell-index = <1>; compatible = "fsl,spi"; - reg = <500 40>; + reg = <0x500 0x40>; interrupts = <1>; interrupt-parent = <&qeic>; mode = "cpu"; @@ -324,11 +321,9 @@ enet2: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <1>; - device-id = <1>; - reg = <2000 200>; - interrupts = <20>; + reg = <0x2000 0x200>; + interrupts = <32>; interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; @@ -341,11 +336,9 @@ enet3: ucc@3000 { device_type = "network"; compatible = "ucc_geth"; - model = "UCC"; cell-index = <2>; - device-id = <2>; - reg = <3000 200>; - interrupts = <21>; + reg = <0x3000 0x200>; + interrupts = <33>; interrupt-parent = <&qeic>; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock-name = "none"; @@ -358,7 +351,7 @@ mdio@2120 { #address-cells = <1>; #size-cells = <0>; - reg = <2120 18>; + reg = <0x2120 0x18>; compatible = "fsl,ucc-mdio"; /* These are the same PHYs as on @@ -366,25 +359,25 @@ qe_phy0: ethernet-phy@07 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <7>; + reg = <0x7>; device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@01 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; qe_phy2: ethernet-phy@02 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <2>; + reg = <0x2>; device_type = "ethernet-phy"; }; qe_phy3: ethernet-phy@03 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <3>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -394,9 +387,9 @@ compatible = "fsl,qe-ic"; #address-cells = <0>; #interrupt-cells = <1>; - reg = <80 80>; + reg = <0x80 0x80>; big-endian; - interrupts = <2e 2 2e 2>; //high:30 low:30 + interrupts = <46 2 46 2>; //high:30 low:30 interrupt-parent = <&mpic>; }; @@ -404,30 +397,30 @@ pci0: pci@e0008000 { cell-index = <0>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x12 AD18 */ - 9000 0 0 1 &mpic 5 1 - 9000 0 0 2 &mpic 6 1 - 9000 0 0 3 &mpic 7 1 - 9000 0 0 4 &mpic 4 1 + 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 /* IDSEL 0x13 AD19 */ - 9800 0 0 1 &mpic 6 1 - 9800 0 0 2 &mpic 7 1 - 9800 0 0 3 &mpic 4 1 - 9800 0 0 4 &mpic 5 1>; + 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>; interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00800000>; - clock-frequency = <3f940aa>; + interrupts = <24 2>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e0008000 1000>; + reg = <0xe0008000 0x1000>; compatible = "fsl,mpc8540-pci"; device_type = "pci"; }; @@ -435,39 +428,39 @@ /* PCI Express */ pci1: pcie@e000a000 { cell-index = <2>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 (PEX) */ - 00000 0 0 1 &mpic 0 1 - 00000 0 0 2 &mpic 1 1 - 00000 0 0 3 &mpic 2 1 - 00000 0 0 4 &mpic 3 1>; + 00000 0x0 0x0 0x1 &mpic 0x0 0x1 + 00000 0x0 0x0 0x2 &mpic 0x1 0x1 + 00000 0x0 0x0 0x3 &mpic 0x2 0x1 + 00000 0x0 0x0 0x4 &mpic 0x3 0x1>; interrupt-parent = <&mpic>; - interrupts = <1a 2>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 e2800000 0 00800000>; - clock-frequency = <1fca055>; + interrupts = <26 2>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>; + clock-frequency = <33333333>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <e000a000 1000>; + reg = <0xe000a000 0x1000>; compatible = "fsl,mpc8548-pcie"; device_type = "pci"; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 a0000000 - 02000000 0 a0000000 - 0 10000000 + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x10000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00800000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x800000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index db37214aee3..66f27ab613a 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -1,7 +1,7 @@ /* * MPC8572 DS Device Tree Source * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2007, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,7 @@ * option) any later version. */ +/dts-v1/; / { model = "fsl,MPC8572DS"; compatible = "fsl,MPC8572DS"; @@ -33,11 +34,11 @@ PowerPC,8572@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -45,11 +46,11 @@ PowerPC,8572@1 { device_type = "cpu"; - reg = <1>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <8000>; // L1, 32K - i-cache-size = <8000>; // L1, 32K + reg = <0x1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -58,38 +59,38 @@ memory { device_type = "memory"; - reg = <00000000 00000000>; // Filled by U-Boot + reg = <0x0 0x0>; // Filled by U-Boot }; soc8572@ffe00000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <00000000 ffe00000 00100000>; - reg = <ffe00000 00001000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed + ranges = <0x0 0xffe00000 0x100000>; + reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed bus-frequency = <0>; // Filled out by uboot. memory-controller@2000 { compatible = "fsl,mpc8572-memory-controller"; - reg = <2000 1000>; + reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; memory-controller@6000 { compatible = "fsl,mpc8572-memory-controller"; - reg = <6000 1000>; + reg = <0x6000 0x1000>; interrupt-parent = <&mpic>; - interrupts = <12 2>; + interrupts = <18 2>; }; l2-cache-controller@20000 { compatible = "fsl,mpc8572-l2-cache-controller"; - reg = <20000 1000>; - cache-line-size = <20>; // 32 bytes - cache-size = <80000>; // L2, 512K + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K interrupt-parent = <&mpic>; - interrupts = <10 2>; + interrupts = <16 2>; }; i2c@3000 { @@ -97,8 +98,8 @@ #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; - reg = <3000 100>; - interrupts = <2b 2>; + reg = <0x3000 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -108,8 +109,8 @@ #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; - reg = <3100 100>; - interrupts = <2b 2>; + reg = <0x3100 0x100>; + interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; @@ -118,27 +119,27 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; - reg = <24520 20>; + reg = <0x24520 0x20>; phy0: ethernet-phy@0 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <0>; + interrupts = <10 1>; + reg = <0x0>; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <1>; + interrupts = <10 1>; + reg = <0x1>; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <2>; + interrupts = <10 1>; + reg = <0x2>; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; - interrupts = <a 1>; - reg = <3>; + interrupts = <10 1>; + reg = <0x3>; }; }; @@ -147,9 +148,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <24000 1000>; + reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1d 2 1e 2 22 2>; + interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; @@ -160,9 +161,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <25000 1000>; + reg = <0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <23 2 24 2 28 2>; + interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; phy-handle = <&phy1>; phy-connection-type = "rgmii-id"; @@ -173,9 +174,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <26000 1000>; + reg = <0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1f 2 20 2 21 2>; + interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; phy-handle = <&phy2>; phy-connection-type = "rgmii-id"; @@ -186,9 +187,9 @@ device_type = "network"; model = "eTSEC"; compatible = "gianfar"; - reg = <27000 1000>; + reg = <0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <25 2 26 2 27 2>; + interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; phy-handle = <&phy3>; phy-connection-type = "rgmii-id"; @@ -198,9 +199,9 @@ cell-index = <0>; device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; + reg = <0x4500 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -208,15 +209,15 @@ cell-index = <1>; device_type = "serial"; compatible = "ns16550"; - reg = <4600 100>; + reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <2a 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; global-utilities@e0000 { //global utilities block compatible = "fsl,mpc8572-guts"; - reg = <e0000 1000>; + reg = <0xe0000 0x1000>; fsl,has-rstcr; }; @@ -225,7 +226,7 @@ interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; + reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -239,167 +240,167 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <ffe08000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 ffc00000 0 00010000>; - clock-frequency = <1fca055>; + reg = <0xffe08000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <18 2>; - interrupt-map-mask = <ff00 0 0 7>; + interrupts = <24 2>; + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x11 func 0 - PCI slot 1 */ - 8800 0 0 1 &mpic 2 1 - 8800 0 0 2 &mpic 3 1 - 8800 0 0 3 &mpic 4 1 - 8800 0 0 4 &mpic 1 1 + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 1 - PCI slot 1 */ - 8900 0 0 1 &mpic 2 1 - 8900 0 0 2 &mpic 3 1 - 8900 0 0 3 &mpic 4 1 - 8900 0 0 4 &mpic 1 1 + 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 2 - PCI slot 1 */ - 8a00 0 0 1 &mpic 2 1 - 8a00 0 0 2 &mpic 3 1 - 8a00 0 0 3 &mpic 4 1 - 8a00 0 0 4 &mpic 1 1 + 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 3 - PCI slot 1 */ - 8b00 0 0 1 &mpic 2 1 - 8b00 0 0 2 &mpic 3 1 - 8b00 0 0 3 &mpic 4 1 - 8b00 0 0 4 &mpic 1 1 + 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 4 - PCI slot 1 */ - 8c00 0 0 1 &mpic 2 1 - 8c00 0 0 2 &mpic 3 1 - 8c00 0 0 3 &mpic 4 1 - 8c00 0 0 4 &mpic 1 1 + 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 5 - PCI slot 1 */ - 8d00 0 0 1 &mpic 2 1 - 8d00 0 0 2 &mpic 3 1 - 8d00 0 0 3 &mpic 4 1 - 8d00 0 0 4 &mpic 1 1 + 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 6 - PCI slot 1 */ - 8e00 0 0 1 &mpic 2 1 - 8e00 0 0 2 &mpic 3 1 - 8e00 0 0 3 &mpic 4 1 - 8e00 0 0 4 &mpic 1 1 + 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x11 func 7 - PCI slot 1 */ - 8f00 0 0 1 &mpic 2 1 - 8f00 0 0 2 &mpic 3 1 - 8f00 0 0 3 &mpic 4 1 - 8f00 0 0 4 &mpic 1 1 + 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 /* IDSEL 0x12 func 0 - PCI slot 2 */ - 9000 0 0 1 &mpic 3 1 - 9000 0 0 2 &mpic 4 1 - 9000 0 0 3 &mpic 1 1 - 9000 0 0 4 &mpic 2 1 + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 1 - PCI slot 2 */ - 9100 0 0 1 &mpic 3 1 - 9100 0 0 2 &mpic 4 1 - 9100 0 0 3 &mpic 1 1 - 9100 0 0 4 &mpic 2 1 + 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 2 - PCI slot 2 */ - 9200 0 0 1 &mpic 3 1 - 9200 0 0 2 &mpic 4 1 - 9200 0 0 3 &mpic 1 1 - 9200 0 0 4 &mpic 2 1 + 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 3 - PCI slot 2 */ - 9300 0 0 1 &mpic 3 1 - 9300 0 0 2 &mpic 4 1 - 9300 0 0 3 &mpic 1 1 - 9300 0 0 4 &mpic 2 1 + 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 4 - PCI slot 2 */ - 9400 0 0 1 &mpic 3 1 - 9400 0 0 2 &mpic 4 1 - 9400 0 0 3 &mpic 1 1 - 9400 0 0 4 &mpic 2 1 + 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 5 - PCI slot 2 */ - 9500 0 0 1 &mpic 3 1 - 9500 0 0 2 &mpic 4 1 - 9500 0 0 3 &mpic 1 1 - 9500 0 0 4 &mpic 2 1 + 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 6 - PCI slot 2 */ - 9600 0 0 1 &mpic 3 1 - 9600 0 0 2 &mpic 4 1 - 9600 0 0 3 &mpic 1 1 - 9600 0 0 4 &mpic 2 1 + 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 /* IDSEL 0x12 func 7 - PCI slot 2 */ - 9700 0 0 1 &mpic 3 1 - 9700 0 0 2 &mpic 4 1 - 9700 0 0 3 &mpic 1 1 - 9700 0 0 4 &mpic 2 1 + 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 // IDSEL 0x1c USB - e000 0 0 1 &i8259 c 2 - e100 0 0 2 &i8259 9 2 - e200 0 0 3 &i8259 a 2 - e300 0 0 4 &i8259 b 2 + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 // IDSEL 0x1d Audio - e800 0 0 1 &i8259 6 2 + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 // IDSEL 0x1e Legacy - f000 0 0 1 &i8259 7 2 - f100 0 0 1 &i8259 7 2 + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 // IDSEL 0x1f IDE/SATA - f800 0 0 1 &i8259 e 2 - f900 0 0 1 &i8259 5 2 + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; uli1575@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; isa@1e { device_type = "isa"; #interrupt-cells = <2>; #size-cells = <1>; #address-cells = <2>; - reg = <f000 0 0 0 0>; - ranges = <1 0 01000000 0 0 - 00001000>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; interrupt-parent = <&i8259>; i8259: interrupt-controller@20 { - reg = <1 20 2 - 1 a0 2 - 1 4d0 2>; + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; interrupt-controller; device_type = "interrupt-controller"; #address-cells = <0>; @@ -412,29 +413,29 @@ i8042@60 { #size-cells = <0>; #address-cells = <1>; - reg = <1 60 1 1 64 1>; - interrupts = <1 3 c 3>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; interrupt-parent = <&i8259>; keyboard@0 { - reg = <0>; + reg = <0x0>; compatible = "pnpPNP,303"; }; mouse@1 { - reg = <1>; + reg = <0x1>; compatible = "pnpPNP,f03"; }; }; rtc@70 { compatible = "pnpPNP,b00"; - reg = <1 70 2>; + reg = <0x1 0x70 0x2>; }; gpio@400 { - reg = <1 400 80>; + reg = <0x1 0x400 0x80>; }; }; }; @@ -449,33 +450,33 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <ffe09000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 ffc10000 0 00010000>; - clock-frequency = <1fca055>; + reg = <0xffe09000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <1a 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 a0000000 - 02000000 0 a0000000 - 0 20000000 + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; }; }; @@ -486,33 +487,33 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <ffe0a000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 c0000000 c0000000 0 20000000 - 01000000 0 00000000 ffc20000 0 00010000>; - clock-frequency = <1fca055>; + reg = <0xffe0a000 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>; + clock-frequency = <33333333>; interrupt-parent = <&mpic>; - interrupts = <1b 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupts = <27 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 >; pcie@0 { - reg = <0 0 0 0 0>; + reg = <0x0 0x0 0x0 0x0 0x0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - ranges = <02000000 0 c0000000 - 02000000 0 c0000000 - 0 20000000 + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 79385bcd5c5..7f9b999843c 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -13,7 +13,7 @@ / { model = "MPC8641HPCN"; - compatible = "mpc86xx"; + compatible = "fsl,mpc8641hpcn"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts index daf9433e906..765e43c997d 100644 --- a/arch/powerpc/boot/dts/mpc866ads.dts +++ b/arch/powerpc/boot/dts/mpc866ads.dts @@ -2,6 +2,7 @@ * MPC866 ADS Device Tree Source * * Copyright 2006 MontaVista Software, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +10,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC866ADS"; @@ -22,37 +24,37 @@ PowerPC,866@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <10>; // 16 bytes - i-cache-line-size = <10>; // 16 bytes - d-cache-size = <2000>; // L1, 8K - i-cache-size = <4000>; // L1, 16K + reg = <0x0>; + d-cache-line-size = <16>; // 16 bytes + i-cache-line-size = <16>; // 16 bytes + d-cache-size = <0x2000>; // L1, 8K + i-cache-size = <0x4000>; // L1, 16K timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - interrupts = <f 2>; // decrementer interrupt + interrupts = <15 2>; // decrementer interrupt interrupt-parent = <&PIC>; }; }; memory { device_type = "memory"; - reg = <00000000 800000>; + reg = <0x0 0x800000>; }; localbus@ff000100 { compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus"; #address-cells = <2>; #size-cells = <1>; - reg = <ff000100 40>; + reg = <0xff000100 0x40>; ranges = < - 1 0 ff080000 00008000 - 5 0 ff0a0000 00008000 + 0x1 0x0 0xff080000 0x8000 + 0x5 0x0 0xff0a0000 0x8000 >; board-control@1,0 { - reg = <1 0 20 5 300 4>; + reg = <0x1 0x0 0x20 0x5 0x300 0x4>; compatible = "fsl,mpc866ads-bcsr"; }; }; @@ -61,17 +63,17 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 ff000000 00100000>; - reg = <ff000000 00000200>; + ranges = <0x0 0xff000000 0x100000>; + reg = <0xff000000 0x200>; bus-frequency = <0>; mdio@e00 { compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio"; - reg = <e00 188>; + reg = <0xe00 0x188>; #address-cells = <1>; #size-cells = <0>; PHY: ethernet-phy@f { - reg = <f>; + reg = <0xf>; device_type = "ethernet-phy"; }; }; @@ -80,7 +82,7 @@ device_type = "network"; compatible = "fsl,mpc866-fec-enet", "fsl,pq1-fec-enet"; - reg = <e00 188>; + reg = <0xe00 0x188>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <3 1>; interrupt-parent = <&PIC>; @@ -91,7 +93,7 @@ PIC: pic@0 { interrupt-controller; #interrupt-cells = <2>; - reg = <0 24>; + reg = <0x0 0x24>; compatible = "fsl,mpc866-pic", "fsl,pq1-pic"; }; @@ -100,7 +102,7 @@ #size-cells = <1>; compatible = "fsl,mpc866-cpm", "fsl,cpm1"; ranges; - reg = <9c0 40>; + reg = <0x9c0 0x40>; brg-frequency = <0>; interrupts = <0 2>; // cpm error interrupt interrupt-parent = <&CPM_PIC>; @@ -108,11 +110,11 @@ muram@2000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 2000 2000>; + ranges = <0x0 0x2000 0x2000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 1c00>; + reg = <0x0 0x1c00>; }; }; @@ -120,7 +122,7 @@ compatible = "fsl,mpc866-brg", "fsl,cpm1-brg", "fsl,cpm-brg"; - reg = <9f0 10>; + reg = <0x9f0 0x10>; clock-frequency = <0>; }; @@ -130,7 +132,7 @@ #interrupt-cells = <1>; interrupts = <5 2 0 2>; interrupt-parent = <&PIC>; - reg = <930 20>; + reg = <0x930 0x20>; compatible = "fsl,mpc866-cpm-pic", "fsl,cpm1-pic"; }; @@ -140,31 +142,31 @@ device_type = "serial"; compatible = "fsl,mpc866-smc-uart", "fsl,cpm1-smc-uart"; - reg = <a80 10 3e80 40>; + reg = <0xa80 0x10 0x3e80 0x40>; interrupts = <4>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <1>; - fsl,cpm-command = <0090>; + fsl,cpm-command = <0x90>; }; serial@a90 { device_type = "serial"; compatible = "fsl,mpc866-smc-uart", "fsl,cpm1-smc-uart"; - reg = <a90 10 3f80 40>; + reg = <0xa90 0x10 0x3f80 0x40>; interrupts = <3>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <2>; - fsl,cpm-command = <00d0>; + fsl,cpm-command = <0xd0>; }; ethernet@a00 { device_type = "network"; compatible = "fsl,mpc866-scc-enet", "fsl,cpm1-scc-enet"; - reg = <a00 18 3c00 100>; + reg = <0xa00 0x18 0x3c00 0x100>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1e>; + interrupts = <30>; interrupt-parent = <&CPM_PIC>; fsl,cpm-command = <0000>; linux,network-index = <1>; diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts index d84a012c2aa..9895043722b 100644 --- a/arch/powerpc/boot/dts/mpc885ads.dts +++ b/arch/powerpc/boot/dts/mpc885ads.dts @@ -2,7 +2,7 @@ * MPC885 ADS Device Tree Source * * Copyright 2006 MontaVista Software, Inc. - * Copyright 2007 Freescale Semiconductor, Inc. + * Copyright 2007,2008 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -10,6 +10,7 @@ * option) any later version. */ +/dts-v1/; / { model = "MPC885ADS"; @@ -23,45 +24,45 @@ PowerPC,885@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <d#16>; - i-cache-line-size = <d#16>; - d-cache-size = <d#8192>; - i-cache-size = <d#8192>; + reg = <0x0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - interrupts = <f 2>; // decrementer interrupt + interrupts = <15 2>; // decrementer interrupt interrupt-parent = <&PIC>; }; }; memory { device_type = "memory"; - reg = <0 0>; + reg = <0x0 0x0>; }; localbus@ff000100 { compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus"; #address-cells = <2>; #size-cells = <1>; - reg = <ff000100 40>; + reg = <0xff000100 0x40>; ranges = < - 0 0 fe000000 00800000 - 1 0 ff080000 00008000 - 5 0 ff0a0000 00008000 + 0x0 0x0 0xfe000000 0x800000 + 0x1 0x0 0xff080000 0x8000 + 0x5 0x0 0xff0a0000 0x8000 >; flash@0,0 { compatible = "jedec-flash"; - reg = <0 0 800000>; + reg = <0x0 0x0 0x800000>; bank-width = <4>; device-width = <1>; }; board-control@1,0 { - reg = <1 0 20 5 300 4>; + reg = <0x1 0x0 0x20 0x5 0x300 0x4>; compatible = "fsl,mpc885ads-bcsr"; }; }; @@ -71,30 +72,30 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - ranges = <0 ff000000 00004000>; + ranges = <0x0 0xff000000 0x4000>; bus-frequency = <0>; // Temporary -- will go away once kernel uses ranges for get_immrbase(). - reg = <ff000000 4000>; + reg = <0xff000000 0x4000>; mdio@e00 { compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio"; - reg = <e00 188>; + reg = <0xe00 0x188>; #address-cells = <1>; #size-cells = <0>; PHY0: ethernet-phy@0 { - reg = <0>; + reg = <0x0>; device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { - reg = <1>; + reg = <0x1>; device_type = "ethernet-phy"; }; PHY2: ethernet-phy@2 { - reg = <2>; + reg = <0x2>; device_type = "ethernet-phy"; }; }; @@ -103,7 +104,7 @@ device_type = "network"; compatible = "fsl,mpc885-fec-enet", "fsl,pq1-fec-enet"; - reg = <e00 188>; + reg = <0xe00 0x188>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <3 1>; interrupt-parent = <&PIC>; @@ -115,7 +116,7 @@ device_type = "network"; compatible = "fsl,mpc885-fec-enet", "fsl,pq1-fec-enet"; - reg = <1e00 188>; + reg = <0x1e00 0x188>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <7 1>; interrupt-parent = <&PIC>; @@ -126,7 +127,7 @@ PIC: interrupt-controller@0 { interrupt-controller; #interrupt-cells = <2>; - reg = <0 24>; + reg = <0x0 0x24>; compatible = "fsl,mpc885-pic", "fsl,pq1-pic"; }; @@ -136,29 +137,29 @@ #size-cells = <2>; compatible = "fsl,pq-pcmcia"; device_type = "pcmcia"; - reg = <80 80>; + reg = <0x80 0x80>; interrupt-parent = <&PIC>; - interrupts = <d 1>; + interrupts = <13 1>; }; cpm@9c0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc885-cpm", "fsl,cpm1"; - command-proc = <9c0>; + command-proc = <0x9c0>; interrupts = <0>; // cpm error interrupt interrupt-parent = <&CPM_PIC>; - reg = <9c0 40>; + reg = <0x9c0 0x40>; ranges; muram@2000 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 2000 2000>; + ranges = <0x0 0x2000 0x2000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 1c00>; + reg = <0x0 0x1c00>; }; }; @@ -167,7 +168,7 @@ "fsl,cpm1-brg", "fsl,cpm-brg"; clock-frequency = <0>; - reg = <9f0 10>; + reg = <0x9f0 0x10>; }; CPM_PIC: interrupt-controller@930 { @@ -175,7 +176,7 @@ #interrupt-cells = <1>; interrupts = <5 2 0 2>; interrupt-parent = <&PIC>; - reg = <930 20>; + reg = <0x930 0x20>; compatible = "fsl,mpc885-cpm-pic", "fsl,cpm1-pic"; }; @@ -184,34 +185,34 @@ device_type = "serial"; compatible = "fsl,mpc885-smc-uart", "fsl,cpm1-smc-uart"; - reg = <a80 10 3e80 40>; + reg = <0xa80 0x10 0x3e80 0x40>; interrupts = <4>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <1>; - fsl,cpm-command = <0090>; + fsl,cpm-command = <0x90>; }; serial@a90 { device_type = "serial"; compatible = "fsl,mpc885-smc-uart", "fsl,cpm1-smc-uart"; - reg = <a90 10 3f80 40>; + reg = <0xa90 0x10 0x3f80 0x40>; interrupts = <3>; interrupt-parent = <&CPM_PIC>; fsl,cpm-brg = <2>; - fsl,cpm-command = <00d0>; + fsl,cpm-command = <0xd0>; }; ethernet@a40 { device_type = "network"; compatible = "fsl,mpc885-scc-enet", "fsl,cpm1-scc-enet"; - reg = <a40 18 3e00 100>; + reg = <0xa40 0x18 0x3e00 0x100>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <1c>; + interrupts = <28>; interrupt-parent = <&CPM_PIC>; phy-handle = <&PHY2>; - fsl,cpm-command = <0080>; + fsl,cpm-command = <0x80>; linux,network-index = <2>; }; }; diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts index 2d564921897..b2d61091b36 100644 --- a/arch/powerpc/boot/dts/pq2fads.dts +++ b/arch/powerpc/boot/dts/pq2fads.dts @@ -1,7 +1,7 @@ /* * Device Tree for the PQ2FADS-ZU board with an MPC8280 chip. * - * Copyright 2007 Freescale Semiconductor Inc. + * Copyright 2007,2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,6 +9,8 @@ * option) any later version. */ +/dts-v1/; + / { model = "pq2fads"; compatible = "fsl,pq2fads"; @@ -21,11 +23,11 @@ cpu@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <d#32>; - i-cache-line-size = <d#32>; - d-cache-size = <d#16384>; - i-cache-size = <d#16384>; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; timebase-frequency = <0>; clock-frequency = <0>; }; @@ -33,7 +35,7 @@ memory { device_type = "memory"; - reg = <0 0>; + reg = <0x0 0x0>; }; localbus@f0010100 { @@ -41,67 +43,67 @@ "fsl,pq2-localbus"; #address-cells = <2>; #size-cells = <1>; - reg = <f0010100 60>; + reg = <0xf0010100 0x60>; - ranges = <0 0 fe000000 00800000 - 1 0 f4500000 00008000 - 8 0 f8200000 00008000>; + ranges = <0x0 0x0 0xfe000000 0x800000 + 0x1 0x0 0xf4500000 0x8000 + 0x8 0x0 0xf8200000 0x8000>; flash@0,0 { compatible = "jedec-flash"; - reg = <0 0 800000>; + reg = <0x0 0x0 0x800000>; bank-width = <4>; device-width = <1>; }; bcsr@1,0 { - reg = <1 0 20>; + reg = <0x1 0x0 0x20>; compatible = "fsl,pq2fads-bcsr"; }; PCI_PIC: pic@8,0 { #interrupt-cells = <1>; interrupt-controller; - reg = <8 0 8>; + reg = <0x8 0x0 0x8>; compatible = "fsl,pq2ads-pci-pic"; interrupt-parent = <&PIC>; - interrupts = <18 8>; + interrupts = <24 8>; }; }; pci@f0010800 { device_type = "pci"; - reg = <f0010800 10c f00101ac 8 f00101c4 8>; + reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>; compatible = "fsl,mpc8280-pci", "fsl,pq2-pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - clock-frequency = <d#66000000>; - interrupt-map-mask = <f800 0 0 7>; + clock-frequency = <66000000>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x16 */ - b000 0 0 1 &PCI_PIC 0 - b000 0 0 2 &PCI_PIC 1 - b000 0 0 3 &PCI_PIC 2 - b000 0 0 4 &PCI_PIC 3 + 0xb000 0x0 0x0 0x1 &PCI_PIC 0 + 0xb000 0x0 0x0 0x2 &PCI_PIC 1 + 0xb000 0x0 0x0 0x3 &PCI_PIC 2 + 0xb000 0x0 0x0 0x4 &PCI_PIC 3 /* IDSEL 0x17 */ - b800 0 0 1 &PCI_PIC 4 - b800 0 0 2 &PCI_PIC 5 - b800 0 0 3 &PCI_PIC 6 - b800 0 0 4 &PCI_PIC 7 + 0xb800 0x0 0x0 0x1 &PCI_PIC 4 + 0xb800 0x0 0x0 0x2 &PCI_PIC 5 + 0xb800 0x0 0x0 0x3 &PCI_PIC 6 + 0xb800 0x0 0x0 0x4 &PCI_PIC 7 /* IDSEL 0x18 */ - c000 0 0 1 &PCI_PIC 8 - c000 0 0 2 &PCI_PIC 9 - c000 0 0 3 &PCI_PIC a - c000 0 0 4 &PCI_PIC b>; + 0xc000 0x0 0x0 0x1 &PCI_PIC 8 + 0xc000 0x0 0x0 0x2 &PCI_PIC 9 + 0xc000 0x0 0x0 0x3 &PCI_PIC 10 + 0xc000 0x0 0x0 0x4 &PCI_PIC 11>; interrupt-parent = <&PIC>; - interrupts = <12 8>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 f6000000 0 02000000>; + interrupts = <18 8>; + ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>; }; soc@f0000000 { @@ -109,27 +111,27 @@ #size-cells = <1>; device_type = "soc"; compatible = "fsl,mpc8280", "fsl,pq2-soc"; - ranges = <00000000 f0000000 00053000>; + ranges = <0x0 0xf0000000 0x53000>; // Temporary -- will go away once kernel uses ranges for get_immrbase(). - reg = <f0000000 00053000>; + reg = <0xf0000000 0x53000>; cpm@119c0 { #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; compatible = "fsl,mpc8280-cpm", "fsl,cpm2"; - reg = <119c0 30>; + reg = <0x119c0 0x30>; ranges; muram@0 { #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 10000>; + ranges = <0x0 0x0 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; - reg = <0 2000 9800 800>; + reg = <0x0 0x2000 0x9800 0x800>; }; }; @@ -137,53 +139,53 @@ compatible = "fsl,mpc8280-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; - reg = <119f0 10 115f0 10>; + reg = <0x119f0 0x10 0x115f0 0x10>; }; serial@11a00 { device_type = "serial"; compatible = "fsl,mpc8280-scc-uart", "fsl,cpm2-scc-uart"; - reg = <11a00 20 8000 100>; - interrupts = <28 8>; + reg = <0x11a00 0x20 0x8000 0x100>; + interrupts = <40 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <1>; - fsl,cpm-command = <00800000>; + fsl,cpm-command = <0x800000>; }; serial@11a20 { device_type = "serial"; compatible = "fsl,mpc8280-scc-uart", "fsl,cpm2-scc-uart"; - reg = <11a20 20 8100 100>; - interrupts = <29 8>; + reg = <0x11a20 0x20 0x8100 0x100>; + interrupts = <41 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <2>; - fsl,cpm-command = <04a00000>; + fsl,cpm-command = <0x4a00000>; }; ethernet@11320 { device_type = "network"; compatible = "fsl,mpc8280-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <11320 20 8500 100 113b0 1>; - interrupts = <21 8>; + reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; + interrupts = <33 8>; interrupt-parent = <&PIC>; phy-handle = <&PHY0>; linux,network-index = <0>; - fsl,cpm-command = <16200300>; + fsl,cpm-command = <0x16200300>; }; ethernet@11340 { device_type = "network"; compatible = "fsl,mpc8280-fcc-enet", "fsl,cpm2-fcc-enet"; - reg = <11340 20 8600 100 113d0 1>; - interrupts = <22 8>; + reg = <0x11340 0x20 0x8600 0x100 0x113d0 0x1>; + interrupts = <34 8>; interrupt-parent = <&PIC>; phy-handle = <&PHY1>; linux,network-index = <1>; - fsl,cpm-command = <1a400300>; + fsl,cpm-command = <0x1a400300>; local-mac-address = [00 e0 0c 00 79 01]; }; @@ -194,21 +196,21 @@ "fsl,cpm2-mdio-bitbang"; #address-cells = <1>; #size-cells = <0>; - reg = <10d40 14>; + reg = <0x10d40 0x14>; fsl,mdio-pin = <9>; - fsl,mdc-pin = <a>; + fsl,mdc-pin = <10>; PHY0: ethernet-phy@0 { interrupt-parent = <&PIC>; - interrupts = <19 2>; - reg = <0>; + interrupts = <25 2>; + reg = <0x0>; device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { interrupt-parent = <&PIC>; - interrupts = <19 2>; - reg = <3>; + interrupts = <25 2>; + reg = <0x3>; device_type = "ethernet-phy"; }; }; @@ -218,17 +220,17 @@ #size-cells = <0>; compatible = "fsl,mpc8280-usb", "fsl,cpm2-usb"; - reg = <11b60 18 8b00 100>; + reg = <0x11b60 0x18 0x8b00 0x100>; interrupt-parent = <&PIC>; - interrupts = <b 8>; - fsl,cpm-command = <2e600000>; + interrupts = <11 8>; + fsl,cpm-command = <0x2e600000>; }; }; PIC: interrupt-controller@10c00 { #interrupt-cells = <2>; interrupt-controller; - reg = <10c00 80>; + reg = <0x10c00 0x80>; compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic"; }; diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts index 297dfa53fe9..1ee6ff43dd5 100644 --- a/arch/powerpc/boot/dts/prpmc2800.dts +++ b/arch/powerpc/boot/dts/prpmc2800.dts @@ -11,6 +11,8 @@ * if it can determine the exact PrPMC type. */ +/dts-v1/; + / { #address-cells = <1>; #size-cells = <1>; @@ -25,46 +27,46 @@ PowerPC,7447 { device_type = "cpu"; reg = <0>; - clock-frequency = <2bb0b140>; /* Default (733 MHz) */ - bus-frequency = <7f28155>; /* 133.333333 MHz */ - timebase-frequency = <1fca055>; /* 33.333333 MHz */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + clock-frequency = <733333333>; /* Default */ + bus-frequency = <133333333>; + timebase-frequency = <33333333>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; }; }; memory { device_type = "memory"; - reg = <00000000 20000000>; /* Default (512MB) */ + reg = <0x0 0x20000000>; /* Default (512MB) */ }; - mv64x60@f1000000 { /* Marvell Discovery */ + system-controller@f1000000 { /* Marvell Discovery mv64360 */ #address-cells = <1>; #size-cells = <1>; model = "mv64360"; /* Default */ - compatible = "marvell,mv64x60"; - clock-frequency = <7f28155>; /* 133.333333 MHz */ - reg = <f1000000 00010000>; - virtual-reg = <f1000000>; - ranges = <88000000 88000000 01000000 /* PCI 0 I/O Space */ - 80000000 80000000 08000000 /* PCI 0 MEM Space */ - a0000000 a0000000 04000000 /* User FLASH */ - 00000000 f1000000 00010000 /* Bridge's regs */ - f2000000 f2000000 00040000>; /* Integrated SRAM */ + compatible = "marvell,mv64360"; + clock-frequency = <133333333>; + reg = <0xf1000000 0x10000>; + virtual-reg = <0xf1000000>; + ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */ + 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */ + 0xa0000000 0xa0000000 0x4000000 /* User FLASH */ + 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */ + 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */ flash@a0000000 { device_type = "rom"; compatible = "direct-mapped"; - reg = <a0000000 4000000>; /* Default (64MB) */ + reg = <0xa0000000 0x4000000>; /* Default (64MB) */ probe-type = "CFI"; bank-width = <4>; - partitions = <00000000 00100000 /* RO */ - 00100000 00040001 /* RW */ - 00140000 00400000 /* RO */ - 00540000 039c0000 /* RO */ - 03f00000 00100000>; /* RO */ + partitions = <0x00000000 0x00100000 /* RO */ + 0x00100000 0x00040001 /* RW */ + 0x00140000 0x00400000 /* RO */ + 0x00540000 0x039c0000 /* RO */ + 0x03f00000 0x00100000>; /* RO */ partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B"; }; @@ -72,171 +74,153 @@ #address-cells = <1>; #size-cells = <0>; device_type = "mdio"; - compatible = "marvell,mv64x60-mdio"; - ethernet-phy@1 { + compatible = "marvell,mv64360-mdio"; + PHY0: ethernet-phy@1 { device_type = "ethernet-phy"; compatible = "broadcom,bcm5421"; - interrupts = <4c>; /* GPP 12 */ - interrupt-parent = <&/mv64x60/pic>; + interrupts = <76>; /* GPP 12 */ + interrupt-parent = <&PIC>; reg = <1>; }; - ethernet-phy@3 { + PHY1: ethernet-phy@3 { device_type = "ethernet-phy"; compatible = "broadcom,bcm5421"; - interrupts = <4c>; /* GPP 12 */ - interrupt-parent = <&/mv64x60/pic>; + interrupts = <76>; /* GPP 12 */ + interrupt-parent = <&PIC>; reg = <3>; }; }; - ethernet@2000 { - reg = <2000 2000>; - eth0 { + ethernet-group@2000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,mv64360-eth-group"; + reg = <0x2000 0x2000>; + ethernet@0 { device_type = "network"; - compatible = "marvell,mv64x60-eth"; - block-index = <0>; - interrupts = <20>; - interrupt-parent = <&/mv64x60/pic>; - phy = <&/mv64x60/mdio/ethernet-phy@1>; + compatible = "marvell,mv64360-eth"; + reg = <0>; + interrupts = <32>; + interrupt-parent = <&PIC>; + phy = <&PHY0>; local-mac-address = [ 00 00 00 00 00 00 ]; }; - eth1 { + ethernet@1 { device_type = "network"; - compatible = "marvell,mv64x60-eth"; - block-index = <1>; - interrupts = <21>; - interrupt-parent = <&/mv64x60/pic>; - phy = <&/mv64x60/mdio/ethernet-phy@3>; + compatible = "marvell,mv64360-eth"; + reg = <1>; + interrupts = <33>; + interrupt-parent = <&PIC>; + phy = <&PHY1>; local-mac-address = [ 00 00 00 00 00 00 ]; }; }; - sdma@4000 { - device_type = "dma"; - compatible = "marvell,mv64x60-sdma"; - reg = <4000 c18>; - virtual-reg = <f1004000>; - interrupt-base = <0>; - interrupts = <24>; - interrupt-parent = <&/mv64x60/pic>; + SDMA0: sdma@4000 { + compatible = "marvell,mv64360-sdma"; + reg = <0x4000 0xc18>; + virtual-reg = <0xf1004000>; + interrupts = <36>; + interrupt-parent = <&PIC>; }; - sdma@6000 { - device_type = "dma"; - compatible = "marvell,mv64x60-sdma"; - reg = <6000 c18>; - virtual-reg = <f1006000>; - interrupt-base = <0>; - interrupts = <26>; - interrupt-parent = <&/mv64x60/pic>; + SDMA1: sdma@6000 { + compatible = "marvell,mv64360-sdma"; + reg = <0x6000 0xc18>; + virtual-reg = <0xf1006000>; + interrupts = <38>; + interrupt-parent = <&PIC>; }; - brg@b200 { - compatible = "marvell,mv64x60-brg"; - reg = <b200 8>; + BRG0: brg@b200 { + compatible = "marvell,mv64360-brg"; + reg = <0xb200 0x8>; clock-src = <8>; - clock-frequency = <7ed6b40>; - current-speed = <2580>; - bcr = <0>; + clock-frequency = <133333333>; + current-speed = <9600>; }; - brg@b208 { - compatible = "marvell,mv64x60-brg"; - reg = <b208 8>; + BRG1: brg@b208 { + compatible = "marvell,mv64360-brg"; + reg = <0xb208 0x8>; clock-src = <8>; - clock-frequency = <7ed6b40>; - current-speed = <2580>; - bcr = <0>; + clock-frequency = <133333333>; + current-speed = <9600>; }; - cunit@f200 { - reg = <f200 200>; + CUNIT: cunit@f200 { + reg = <0xf200 0x200>; }; - mpscrouting@b400 { - reg = <b400 c>; + MPSCROUTING: mpscrouting@b400 { + reg = <0xb400 0xc>; }; - mpscintr@b800 { - reg = <b800 100>; - virtual-reg = <f100b800>; + MPSCINTR: mpscintr@b800 { + reg = <0xb800 0x100>; + virtual-reg = <0xf100b800>; }; - mpsc@8000 { + MPSC0: mpsc@8000 { device_type = "serial"; - compatible = "marvell,mpsc"; - reg = <8000 38>; - virtual-reg = <f1008000>; - sdma = <&/mv64x60/sdma@4000>; - brg = <&/mv64x60/brg@b200>; - cunit = <&/mv64x60/cunit@f200>; - mpscrouting = <&/mv64x60/mpscrouting@b400>; - mpscintr = <&/mv64x60/mpscintr@b800>; - block-index = <0>; - max_idle = <28>; - chr_1 = <0>; - chr_2 = <0>; - chr_10 = <3>; - mpcr = <0>; - interrupts = <28>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-mpsc"; + reg = <0x8000 0x38>; + virtual-reg = <0xf1008000>; + sdma = <&SDMA0>; + brg = <&BRG0>; + cunit = <&CUNIT>; + mpscrouting = <&MPSCROUTING>; + mpscintr = <&MPSCINTR>; + cell-index = <0>; + interrupts = <40>; + interrupt-parent = <&PIC>; }; - mpsc@9000 { + MPSC1: mpsc@9000 { device_type = "serial"; - compatible = "marvell,mpsc"; - reg = <9000 38>; - virtual-reg = <f1009000>; - sdma = <&/mv64x60/sdma@6000>; - brg = <&/mv64x60/brg@b208>; - cunit = <&/mv64x60/cunit@f200>; - mpscrouting = <&/mv64x60/mpscrouting@b400>; - mpscintr = <&/mv64x60/mpscintr@b800>; - block-index = <1>; - max_idle = <28>; - chr_1 = <0>; - chr_2 = <0>; - chr_10 = <3>; - mpcr = <0>; - interrupts = <2a>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-mpsc"; + reg = <0x9000 0x38>; + virtual-reg = <0xf1009000>; + sdma = <&SDMA1>; + brg = <&BRG1>; + cunit = <&CUNIT>; + mpscrouting = <&MPSCROUTING>; + mpscintr = <&MPSCINTR>; + cell-index = <1>; + interrupts = <42>; + interrupt-parent = <&PIC>; }; wdt@b410 { /* watchdog timer */ - compatible = "marvell,mv64x60-wdt"; - reg = <b410 8>; - timeout = <a>; /* wdt timeout in seconds */ + compatible = "marvell,mv64360-wdt"; + reg = <0xb410 0x8>; }; i2c@c000 { device_type = "i2c"; - compatible = "marvell,mv64x60-i2c"; - reg = <c000 20>; - virtual-reg = <f100c000>; - freq_m = <8>; - freq_n = <3>; - timeout = <3e8>; /* 1000 = 1 second */ - retries = <1>; - interrupts = <25>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-i2c"; + reg = <0xc000 0x20>; + virtual-reg = <0xf100c000>; + interrupts = <37>; + interrupt-parent = <&PIC>; }; - pic { + PIC: pic { #interrupt-cells = <1>; #address-cells = <0>; - compatible = "marvell,mv64x60-pic"; - reg = <0000 88>; + compatible = "marvell,mv64360-pic"; + reg = <0x0 0x88>; interrupt-controller; }; mpp@f000 { - compatible = "marvell,mv64x60-mpp"; - reg = <f000 10>; + compatible = "marvell,mv64360-mpp"; + reg = <0xf000 0x10>; }; gpp@f100 { - compatible = "marvell,mv64x60-gpp"; - reg = <f100 20>; + compatible = "marvell,mv64360-gpp"; + reg = <0xf100 0x20>; }; pci@80000000 { @@ -244,73 +228,75 @@ #size-cells = <2>; #interrupt-cells = <1>; device_type = "pci"; - compatible = "marvell,mv64x60-pci"; - reg = <0cf8 8>; - ranges = <01000000 0 0 88000000 0 01000000 - 02000000 0 80000000 80000000 0 08000000>; - bus-range = <0 ff>; - clock-frequency = <3EF1480>; - interrupt-pci-iack = <0c34>; - interrupt-parent = <&/mv64x60/pic>; - interrupt-map-mask = <f800 0 0 7>; + compatible = "marvell,mv64360-pci"; + reg = <0xcf8 0x8>; + ranges = <0x01000000 0x0 0x0 + 0x88000000 0x0 0x01000000 + 0x02000000 0x0 0x80000000 + 0x80000000 0x0 0x08000000>; + bus-range = <0 255>; + clock-frequency = <66000000>; + interrupt-pci-iack = <0xc34>; + interrupt-parent = <&PIC>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0a */ - 5000 0 0 1 &/mv64x60/pic 50 - 5000 0 0 2 &/mv64x60/pic 51 - 5000 0 0 3 &/mv64x60/pic 5b - 5000 0 0 4 &/mv64x60/pic 5d + 0x5000 0 0 1 &PIC 80 + 0x5000 0 0 2 &PIC 81 + 0x5000 0 0 3 &PIC 91 + 0x5000 0 0 4 &PIC 93 /* IDSEL 0x0b */ - 5800 0 0 1 &/mv64x60/pic 5b - 5800 0 0 2 &/mv64x60/pic 5d - 5800 0 0 3 &/mv64x60/pic 50 - 5800 0 0 4 &/mv64x60/pic 51 + 0x5800 0 0 1 &PIC 91 + 0x5800 0 0 2 &PIC 93 + 0x5800 0 0 3 &PIC 80 + 0x5800 0 0 4 &PIC 81 /* IDSEL 0x0c */ - 6000 0 0 1 &/mv64x60/pic 5b - 6000 0 0 2 &/mv64x60/pic 5d - 6000 0 0 3 &/mv64x60/pic 50 - 6000 0 0 4 &/mv64x60/pic 51 + 0x6000 0 0 1 &PIC 91 + 0x6000 0 0 2 &PIC 93 + 0x6000 0 0 3 &PIC 80 + 0x6000 0 0 4 &PIC 81 /* IDSEL 0x0d */ - 6800 0 0 1 &/mv64x60/pic 5d - 6800 0 0 2 &/mv64x60/pic 50 - 6800 0 0 3 &/mv64x60/pic 51 - 6800 0 0 4 &/mv64x60/pic 5b + 0x6800 0 0 1 &PIC 93 + 0x6800 0 0 2 &PIC 80 + 0x6800 0 0 3 &PIC 81 + 0x6800 0 0 4 &PIC 91 >; }; cpu-error@0070 { - compatible = "marvell,mv64x60-cpu-error"; - reg = <0070 10 0128 28>; - interrupts = <03>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-cpu-error"; + reg = <0x70 0x10 0x128 0x28>; + interrupts = <3>; + interrupt-parent = <&PIC>; }; sram-ctrl@0380 { - compatible = "marvell,mv64x60-sram-ctrl"; - reg = <0380 80>; - interrupts = <0d>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-sram-ctrl"; + reg = <0x380 0x80>; + interrupts = <13>; + interrupt-parent = <&PIC>; }; pci-error@1d40 { - compatible = "marvell,mv64x60-pci-error"; - reg = <1d40 40 0c28 4>; - interrupts = <0c>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-pci-error"; + reg = <0x1d40 0x40 0xc28 0x4>; + interrupts = <12>; + interrupt-parent = <&PIC>; }; mem-ctrl@1400 { - compatible = "marvell,mv64x60-mem-ctrl"; - reg = <1400 60>; - interrupts = <11>; - interrupt-parent = <&/mv64x60/pic>; + compatible = "marvell,mv64360-mem-ctrl"; + reg = <0x1400 0x60>; + interrupts = <17>; + interrupt-parent = <&PIC>; }; }; chosen { bootargs = "ip=on"; - linux,stdout-path = "/mv64x60@f1000000/mpsc@8000"; + linux,stdout-path = &MPSC0; }; }; diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts index f947c75a2e9..6a8fa7089ea 100644 --- a/arch/powerpc/boot/dts/rainier.dts +++ b/arch/powerpc/boot/dts/rainier.dts @@ -254,7 +254,6 @@ }; EMAC0: ethernet@ef600e00 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC0>; @@ -270,7 +269,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -284,7 +283,6 @@ }; EMAC1: ethernet@ef600f00 { - linux,network-index = <1>; device_type = "network"; compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC1>; @@ -300,7 +298,7 @@ mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts new file mode 100644 index 00000000000..3eebeec157b --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8641d.dts @@ -0,0 +1,352 @@ +/* + * SBC8641D Device Tree Source + * + * Copyright 2008 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "SBC8641D"; + compatible = "wind,sbc8641"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; // L1 + i-cache-size = <32768>; // L1 + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512M at 0x0 + }; + + localbus@f8005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + reg = <0xf8005000 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xf0000000 0x00010000 // 64KB EEPROM + 2 0 0xf1000000 0x00100000 // EPLD (1MB) + 3 0 0xe0000000 0x04000000 // 64MB LB SDRAM (CS3) + 4 0 0xe4000000 0x04000000 // 64MB LB SDRAM (CS4) + 6 0 0xf4000000 0x00100000 // LCD display (1MB) + 7 0 0xe8000000 0x04000000>; // 64MB OneNAND + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "dtb"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@300000 { + label = "kernel"; + reg = <0x00100000 0x00400000>; + read-only; + }; + partition@400000 { + label = "fs"; + reg = <0x00500000 0x00a00000>; + }; + partition@700000 { + label = "firmware"; + reg = <0x00f00000 0x00100000>; + read-only; + }; + }; + + epld@2,0 { + compatible = "wrs,epld-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <2 0 0x100000>; + ranges = <0 0 5 0 1 // User switches + 1 0 5 1 1 // Board ID/Rev + 3 0 5 3 1>; // LEDs + }; + }; + + soc@f8000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x00000000 0xf8000000 0x00100000>; + reg = <0xf8000000 0x00001000>; // CCSRBAR + bus-frequency = <0>; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + phy0: ethernet-phy@1f { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x1f>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + enet2: ethernet@26000 { + cell-index = <2>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + enet3: ethernet@27000 { + cell-index = <3>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <28 2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@f8008000 { + cell-index = <0>; + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf8008000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + interrupt-map-mask = <0xff00 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0000 0 0 1 &mpic 0 1 + 0x0000 0 0 2 &mpic 1 1 + 0x0000 0 0 3 &mpic 2 1 + 0x0000 0 0 4 &mpic 3 1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; + }; + + }; + + pci1: pcie@f8009000 { + cell-index = <1>; + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf8009000 0x1000>; + bus-range = <0 0xff>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0000 0 0 1 &mpic 4 1 + 0x0000 0 0 2 &mpic 5 1 + 0x0000 0 0 3 &mpic 6 1 + 0x0000 0 0 4 &mpic 7 1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts index 8db9515d7dc..a1ae4d6ec99 100644 --- a/arch/powerpc/boot/dts/sequoia.dts +++ b/arch/powerpc/boot/dts/sequoia.dts @@ -269,7 +269,6 @@ }; EMAC0: ethernet@ef600e00 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC0>; @@ -285,7 +284,7 @@ mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -299,7 +298,6 @@ }; EMAC1: ethernet@ef600f00 { - linux,network-index = <1>; device_type = "network"; compatible = "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC1>; @@ -315,7 +313,7 @@ mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts index 8278068c802..e808e1c5593 100644 --- a/arch/powerpc/boot/dts/taishan.dts +++ b/arch/powerpc/boot/dts/taishan.dts @@ -104,6 +104,16 @@ // FIXME: anything else? }; + L2C0: l2c { + compatible = "ibm,l2-cache-440gx", "ibm,l2-cache"; + dcr-reg = <20 8 /* Internal SRAM DCR's */ + 30 8>; /* L2 cache DCR's */ + cache-line-size = <20>; /* 32 bytes */ + cache-size = <40000>; /* L2, 256K */ + interrupt-parent = <&UIC2>; + interrupts = <17 1>; + }; + plb { compatible = "ibm,plb-440gx", "ibm,plb4"; #address-cells = <2>; @@ -232,10 +242,18 @@ reg = <40000790 8>; }; + TAH0: emac-tah@40000b50 { + compatible = "ibm,tah-440gx", "ibm,tah"; + reg = <40000b50 30>; + }; + + TAH1: emac-tah@40000d50 { + compatible = "ibm,tah-440gx", "ibm,tah"; + reg = <40000d50 30>; + }; EMAC0: ethernet@40000800 { unused = <1>; - linux,network-index = <2>; device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC1>; @@ -256,7 +274,6 @@ }; EMAC1: ethernet@40000900 { unused = <1>; - linux,network-index = <3>; device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC1>; @@ -277,7 +294,6 @@ }; EMAC2: ethernet@40000c00 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC2>; @@ -288,7 +304,7 @@ mal-tx-channel = <2>; mal-rx-channel = <2>; cell-index = <2>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -297,10 +313,11 @@ rgmii-channel = <0>; zmii-device = <&ZMII0>; zmii-channel = <2>; + tah-device = <&TAH0>; + tah-channel = <0>; }; EMAC3: ethernet@40000e00 { - linux,network-index = <1>; device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC2>; @@ -311,7 +328,7 @@ mal-tx-channel = <3>; mal-rx-channel = <3>; cell-index = <3>; - max-frame-size = <5dc>; + max-frame-size = <2328>; rx-fifo-size = <1000>; tx-fifo-size = <800>; phy-mode = "rgmii"; @@ -320,6 +337,8 @@ rgmii-channel = <1>; zmii-device = <&ZMII0>; zmii-channel = <3>; + tah-device = <&TAH1>; + tah-channel = <0>; }; diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts index dcc21b0438e..a328607c8f8 100644 --- a/arch/powerpc/boot/dts/walnut.dts +++ b/arch/powerpc/boot/dts/walnut.dts @@ -125,7 +125,6 @@ }; EMAC: ethernet@ef600800 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-405gp", "ibm,emac"; interrupt-parent = <&UIC0>; diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index dc1499d30f4..b04a52e22bf 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -204,7 +204,6 @@ }; EMAC0: ethernet@ef600e00 { - linux,network-index = <0>; device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts new file mode 100644 index 00000000000..0d6d332814e --- /dev/null +++ b/arch/powerpc/boot/dts/yosemite.dts @@ -0,0 +1,304 @@ +/* + * Device Tree Source for AMCC Yosemite + * + * Copyright 2008 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,yosemite"; + compatible = "amcc,yosemite","amcc,bamboo"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440EP"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440ep"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440ep"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + DMA0: dma { + compatible = "ibm,dma-440ep", "ibm,dma-440gp"; + dcr-reg = <100 027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <180 62>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + }; + + POB0: opb { + compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Bamboo is oddball in the 44x world and doesn't use the ERPN + * bits. + */ + ranges = <00000000 0 00000000 80000000 + 80000000 0 80000000 80000000>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + status = "disabled"; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <4 4>; + status = "disabled"; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + spi@ef600900 { + compatible = "amcc,spi-440ep"; + reg = <ef600900 6>; + interrupts = <8 4>; + interrupt-parent = <&UIC0>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1c 4 1d 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1e 4 1f 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <2 3>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + + usb@ef601000 { + compatible = "ohci-be"; + reg = <ef601000 80>; + interrupts = <8 4 9 4>; + interrupt-parent = < &UIC1 >; + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440ep-pci", "ibm,plb-pci"; + primary; + reg = <0 eec00000 8 /* Config space access */ + 0 eed00000 4 /* IACK */ + 0 eed00000 4 /* Special cycle */ + 0 ef400000 40>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <02000000 0 a0000000 0 a0000000 0 20000000 + 01000000 0 00000000 0 e8000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* Bamboo has all 4 IRQ pins tied together per slot */ + interrupt-map-mask = <f800 0 0 0>; + interrupt-map = < + /* IDSEL 1 */ + 0800 0 0 0 &UIC0 1c 8 + + /* IDSEL 2 */ + 1000 0 0 0 &UIC0 1b 8 + + /* IDSEL 3 */ + 1800 0 0 0 &UIC0 1a 8 + + /* IDSEL 4 */ + 2000 0 0 0 &UIC0 19 8 + >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/ebony.c b/arch/powerpc/boot/ebony.c index f61364c47a7..5532ab3221d 100644 --- a/arch/powerpc/boot/ebony.c +++ b/arch/powerpc/boot/ebony.c @@ -75,7 +75,8 @@ static void ebony_fixups(void) ibm440gp_fixup_clocks(sysclk, 6 * 1843200); ibm4xx_sdram_fixup_memsize(); - dt_fixup_mac_addresses(ebony_mac0, ebony_mac1); + dt_fixup_mac_address_by_alias("ethernet0", ebony_mac0); + dt_fixup_mac_address_by_alias("ethernet1", ebony_mac1); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ebony_flashsel_fixup(); } diff --git a/arch/powerpc/boot/libfdt-wrapper.c b/arch/powerpc/boot/libfdt-wrapper.c index 59016bef139..c541fd8a95d 100644 --- a/arch/powerpc/boot/libfdt-wrapper.c +++ b/arch/powerpc/boot/libfdt-wrapper.c @@ -35,7 +35,7 @@ #define check_err(err) \ ({ \ if (BAD_ERROR(err) || ((err < 0) && DEBUG)) \ - printf("%s():%d %s\n\r", __FUNCTION__, __LINE__, \ + printf("%s():%d %s\n\r", __func__, __LINE__, \ fdt_strerror(err)); \ if (BAD_ERROR(err)) \ exit(); \ diff --git a/arch/powerpc/boot/mpc52xx-psc.c b/arch/powerpc/boot/mpc52xx-psc.c index 1074626e6a3..d4cb4e4e093 100644 --- a/arch/powerpc/boot/mpc52xx-psc.c +++ b/arch/powerpc/boot/mpc52xx-psc.c @@ -51,14 +51,9 @@ static unsigned char psc_getc(void) int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp) { - int n; - /* Get the base address of the psc registers */ - n = getprop(devp, "virtual-reg", &psc, sizeof(psc)); - if (n != sizeof(psc)) { - if (!dt_xlate_reg(devp, 0, (void *)&psc, NULL)) - return -1; - } + if (dt_get_virtual_reg(devp, &psc, 1) < 1) + return -1; scdp->open = psc_open; scdp->putc = psc_putc; diff --git a/arch/powerpc/boot/mpsc.c b/arch/powerpc/boot/mpsc.c index 802ea53790d..425ad88cce8 100644 --- a/arch/powerpc/boot/mpsc.c +++ b/arch/powerpc/boot/mpsc.c @@ -141,7 +141,7 @@ int mpsc_console_init(void *devp, struct serial_console_data *scdp) if (mpscintr_base == NULL) goto err_out; - n = getprop(devp, "block-index", &v, sizeof(v)); + n = getprop(devp, "cell-index", &v, sizeof(v)); if (n != sizeof(v)) goto err_out; reg_set = (int)v; diff --git a/arch/powerpc/boot/mv64x60.c b/arch/powerpc/boot/mv64x60.c index b43259455d4..d9bb302b91d 100644 --- a/arch/powerpc/boot/mv64x60.c +++ b/arch/powerpc/boot/mv64x60.c @@ -535,7 +535,7 @@ u8 *mv64x60_get_bridge_pbase(void) u32 v[2]; void *devp; - devp = finddevice("/mv64x60"); + devp = find_node_by_compatible(NULL, "marvell,mv64360"); if (devp == NULL) goto err_out; if (getprop(devp, "reg", v, sizeof(v)) != sizeof(v)) @@ -553,7 +553,7 @@ u8 *mv64x60_get_bridge_base(void) u32 v; void *devp; - devp = finddevice("/mv64x60"); + devp = find_node_by_compatible(NULL, "marvell,mv64360"); if (devp == NULL) goto err_out; if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v)) diff --git a/arch/powerpc/boot/mv64x60_i2c.c b/arch/powerpc/boot/mv64x60_i2c.c index d085377be3b..52a3212b663 100644 --- a/arch/powerpc/boot/mv64x60_i2c.c +++ b/arch/powerpc/boot/mv64x60_i2c.c @@ -185,7 +185,7 @@ int mv64x60_i2c_open(void) u32 v; void *devp; - devp = finddevice("/mv64x60/i2c"); + devp = find_node_by_compatible(NULL, "marvell,mv64360-i2c"); if (devp == NULL) goto err_out; if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v)) diff --git a/arch/powerpc/boot/ns16550.c b/arch/powerpc/boot/ns16550.c index f8f1b2f3141..aef3bdc8916 100644 --- a/arch/powerpc/boot/ns16550.c +++ b/arch/powerpc/boot/ns16550.c @@ -55,15 +55,9 @@ static u8 ns16550_tstc(void) int ns16550_console_init(void *devp, struct serial_console_data *scdp) { int n; - unsigned long reg_phys; - n = getprop(devp, "virtual-reg", ®_base, sizeof(reg_base)); - if (n != sizeof(reg_base)) { - if (!dt_xlate_reg(devp, 0, ®_phys, NULL)) - return -1; - - reg_base = (void *)reg_phys; - } + if (dt_get_virtual_reg(devp, (void **)®_base, 1) < 1) + return -1; n = getprop(devp, "reg-shift", ®_shift, sizeof(reg_shift)); if (n != sizeof(reg_shift)) diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h index 4b0544b03c6..321e2f5afe7 100644 --- a/arch/powerpc/boot/ops.h +++ b/arch/powerpc/boot/ops.h @@ -95,6 +95,7 @@ int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size); int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr); int dt_is_compatible(void *node, const char *compat); void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize); +int dt_get_virtual_reg(void *node, void **addr, int nres); static inline void *finddevice(const char *name) { diff --git a/arch/powerpc/boot/prpmc2800.c b/arch/powerpc/boot/prpmc2800.c index 05c3245b30d..da31d603048 100644 --- a/arch/powerpc/boot/prpmc2800.c +++ b/arch/powerpc/boot/prpmc2800.c @@ -344,20 +344,20 @@ static void prpmc2800_bridge_setup(u32 mem_size) acc_bits); /* Get the cpu -> pci i/o & mem mappings from the device tree */ - devp = finddevice("/mv64x60/pci@80000000"); + devp = find_node_by_compatible(NULL, "marvell,mv64360-pci"); if (devp == NULL) - fatal("Error: Missing /mv64x60/pci@80000000" + fatal("Error: Missing marvell,mv64360-pci" " device tree node\n\r"); rc = getprop(devp, "ranges", v, sizeof(v)); if (rc != sizeof(v)) - fatal("Error: Can't find /mv64x60/pci@80000000/ranges" + fatal("Error: Can't find marvell,mv64360-pci ranges" " property\n\r"); /* Get the cpu -> pci i/o & mem mappings from the device tree */ - devp = finddevice("/mv64x60"); + devp = find_node_by_compatible(NULL, "marvell,mv64360"); if (devp == NULL) - fatal("Error: Missing /mv64x60 device tree node\n\r"); + fatal("Error: Missing marvell,mv64360 device tree node\n\r"); enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE)); enables |= 0x0007fe00; /* Disable all cpu->pci windows */ @@ -429,9 +429,9 @@ static void prpmc2800_fixups(void) setprop(devp, "model", model, l); /* Set /cpus/PowerPC,7447/clock-frequency */ - devp = finddevice("/cpus/PowerPC,7447"); + devp = find_node_by_prop_value_str(NULL, "device_type", "cpu"); if (devp == NULL) - fatal("Error: Missing proper /cpus device tree node\n\r"); + fatal("Error: Missing proper cpu device tree node\n\r"); v[0] = bip->core_speed; setprop(devp, "clock-frequency", &v[0], sizeof(v[0])); @@ -443,16 +443,17 @@ static void prpmc2800_fixups(void) v[1] = bip->mem_size; setprop(devp, "reg", v, sizeof(v)); - /* Update /mv64x60/model, if this is a mv64362 */ + /* Update model, if this is a mv64362 */ if (bip->bridge_type == BRIDGE_TYPE_MV64362) { - devp = finddevice("/mv64x60"); + devp = find_node_by_compatible(NULL, "marvell,mv64360"); if (devp == NULL) - fatal("Error: Missing /mv64x60 device tree node\n\r"); + fatal("Error: Missing marvell,mv64360" + " device tree node\n\r"); setprop(devp, "model", "mv64362", strlen("mv64362") + 1); } /* Set User FLASH size */ - devp = finddevice("/mv64x60/flash@a0000000"); + devp = find_node_by_compatible(NULL, "direct-mapped"); if (devp == NULL) fatal("Error: Missing User FLASH device tree node\n\r"); rc = getprop(devp, "reg", v, sizeof(v)); diff --git a/arch/powerpc/boot/ps3-head.S b/arch/powerpc/boot/ps3-head.S index a55c2735f75..b6fcbaf5027 100644 --- a/arch/powerpc/boot/ps3-head.S +++ b/arch/powerpc/boot/ps3-head.S @@ -27,8 +27,9 @@ /* * __system_reset_overlay - The PS3 first stage entry. * - * The bootwraper build script copies the 0x100 bytes at symbol - * __system_reset_overlay to offset 0x100 of the rom image. + * The bootwraper build script copies the 512 bytes at symbol + * __system_reset_overlay to offset 0x100 of the rom image. This symbol + * must occupy 512 or less bytes. * * The PS3 has a single processor with two threads. */ @@ -47,8 +48,6 @@ __system_reset_overlay: mfspr r3, 0x88 cntlzw. r3, r3 - li r4, 0 - li r5, 0 beq 1f /* Secondary goes to __secondary_hold in kernel. */ @@ -57,8 +56,14 @@ __system_reset_overlay: mtctr r4 bctr - /* Primary delays then goes to _zimage_start in wrapper. */ 1: + /* Save the value at addr zero for a null pointer write check later. */ + + li r4, 0 + lwz r3, 0(r4) + + /* Primary delays then goes to _zimage_start in wrapper. */ + or 31, 31, 31 /* db16cyc */ or 31, 31, 31 /* db16cyc */ @@ -67,16 +72,18 @@ __system_reset_overlay: mtctr r4 bctr + . = __system_reset_overlay + 512 + /* * __system_reset_kernel - Place holder for the kernel reset vector. * - * The bootwrapper build script copies 0x100 bytes from offset 0x100 + * The bootwrapper build script copies 512 bytes from offset 0x100 * of the rom image to the symbol __system_reset_kernel. At runtime - * the bootwrapper program copies the 0x100 bytes at __system_reset_kernel - * to ram address 0x100. This symbol must occupy 0x100 bytes. + * the bootwrapper program copies the 512 bytes at __system_reset_kernel + * to ram address 0x100. This symbol must occupy 512 bytes. */ .globl __system_reset_kernel __system_reset_kernel: - . = __system_reset_kernel + 0x100 + . = __system_reset_kernel + 512 diff --git a/arch/powerpc/boot/ps3.c b/arch/powerpc/boot/ps3.c index 3b0ac4d006e..9954d98871d 100644 --- a/arch/powerpc/boot/ps3.c +++ b/arch/powerpc/boot/ps3.c @@ -27,10 +27,10 @@ #include "page.h" #include "ops.h" -extern s64 lv1_panic(u64 in_1); -extern s64 lv1_get_logical_partition_id(u64 *out_1); -extern s64 lv1_get_logical_ppe_id(u64 *out_1); -extern s64 lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3, +extern int lv1_panic(u64 in_1); +extern int lv1_get_logical_partition_id(u64 *out_1); +extern int lv1_get_logical_ppe_id(u64 *out_1); +extern int lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3, u64 in_4, u64 in_5, u64 *out_1, u64 *out_2); #ifdef DEBUG @@ -46,6 +46,7 @@ BSS_STACK(4096); * edit the command line passed to vmlinux (by setting /chosen/bootargs). * The buffer is put in it's own section so that tools may locate it easier. */ + static char cmdline[COMMAND_LINE_SIZE] __attribute__((__section__("__builtin_cmdline"))); @@ -75,7 +76,7 @@ static void ps3_exit(void) static int ps3_repository_read_rm_size(u64 *rm_size) { - s64 result; + int result; u64 lpar_id; u64 ppe_id; u64 v2; @@ -114,16 +115,17 @@ void ps3_copy_vectors(void) { extern char __system_reset_kernel[]; - memcpy((void *)0x100, __system_reset_kernel, 0x100); - flush_cache((void *)0x100, 0x100); + memcpy((void *)0x100, __system_reset_kernel, 512); + flush_cache((void *)0x100, 512); } -void platform_init(void) +void platform_init(unsigned long null_check) { const u32 heapsize = 0x1000000 - (u32)_end; /* 16MiB */ void *chosen; unsigned long ft_addr; u64 rm_size; + unsigned long val; console_ops.write = ps3_console_write; platform_ops.exit = ps3_exit; @@ -151,6 +153,11 @@ void platform_init(void) printf(" flat tree at 0x%lx\n\r", ft_addr); + val = *(unsigned long *)0; + + if (val != null_check) + printf("null check failed: %lx != %lx\n\r", val, null_check); + ((kernel_entry_t)0)(ft_addr, 0, NULL); ps3_exit(); diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c index 9960421eb6b..8b3607cb53f 100644 --- a/arch/powerpc/boot/serial.c +++ b/arch/powerpc/boot/serial.c @@ -119,7 +119,7 @@ int serial_console_init(void) if (dt_is_compatible(devp, "ns16550")) rc = ns16550_console_init(devp, &serial_cd); - else if (dt_is_compatible(devp, "marvell,mpsc")) + else if (dt_is_compatible(devp, "marvell,mv64360-mpsc")) rc = mpsc_console_init(devp, &serial_cd); else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") || dt_is_compatible(devp, "fsl,cpm1-smc-uart") || diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c new file mode 100644 index 00000000000..86cd285bccc --- /dev/null +++ b/arch/powerpc/boot/simpleboot.c @@ -0,0 +1,84 @@ +/* + * The simple platform -- for booting when firmware doesn't supply a device + * tree or any platform configuration information. + * All data is extracted from an embedded device tree + * blob. + * + * Authors: Scott Wood <scottwood@freescale.com> + * Grant Likely <grant.likely@secretlab.ca> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * Copyright (c) 2008 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "types.h" +#include "io.h" +#include "stdio.h" +#include "libfdt/libfdt.h" + +BSS_STACK(4*1024); + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + const u32 *na, *ns, *reg, *timebase; + u64 memsize64; + int node, size, i; + + /* Make sure FDT blob is sane */ + if (fdt_check_header(_dtb_start) != 0) + fatal("Invalid device tree blob\n"); + + /* Find the #address-cells and #size-cells properties */ + node = fdt_path_offset(_dtb_start, "/"); + if (node < 0) + fatal("Cannot find root node\n"); + na = fdt_getprop(_dtb_start, node, "#address-cells", &size); + if (!na || (size != 4)) + fatal("Cannot find #address-cells property"); + ns = fdt_getprop(_dtb_start, node, "#size-cells", &size); + if (!ns || (size != 4)) + fatal("Cannot find #size-cells property"); + + /* Find the memory range */ + node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", + "memory", sizeof("memory")); + if (node < 0) + fatal("Cannot find memory node\n"); + reg = fdt_getprop(_dtb_start, node, "reg", &size); + if (size < (*na+*ns) * sizeof(u32)) + fatal("cannot get memory range\n"); + + /* Only interested in memory based at 0 */ + for (i = 0; i < *na; i++) + if (*reg++ != 0) + fatal("Memory range is not based at address 0\n"); + + /* get the memsize and trucate it to under 4G on 32 bit machines */ + memsize64 = 0; + for (i = 0; i < *ns; i++) + memsize64 = (memsize64 << 32) | *reg++; + if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL) + memsize64 = 0xffffffff; + + /* finally, setup the timebase */ + node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", + "cpu", sizeof("cpu")); + if (!node) + fatal("Cannot find cpu node\n"); + timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size); + if (timebase && (size == 4)) + timebase_period_ns = 1000000000 / *timebase; + + /* Now we have the memory size; initialize the heap */ + simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64); + + /* prepare the device tree and find the console */ + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/treeboot-walnut.c b/arch/powerpc/boot/treeboot-walnut.c index 472e36605a5..097974e59fa 100644 --- a/arch/powerpc/boot/treeboot-walnut.c +++ b/arch/powerpc/boot/treeboot-walnut.c @@ -68,7 +68,7 @@ static void walnut_fixups(void) ibm4xx_quiesce_eth((u32 *)0xef600800, NULL); ibm4xx_fixup_ebc_ranges("/plb/ebc"); walnut_flashsel_fixup(); - dt_fixup_mac_addresses((u8 *) WALNUT_OPENBIOS_MAC_OFF); + dt_fixup_mac_address_by_alias("ethernet0", (u8 *) WALNUT_OPENBIOS_MAC_OFF); } void platform_init(void) diff --git a/arch/powerpc/boot/virtex405-head.S b/arch/powerpc/boot/virtex405-head.S new file mode 100644 index 00000000000..3edb13f9466 --- /dev/null +++ b/arch/powerpc/boot/virtex405-head.S @@ -0,0 +1,30 @@ +#include "ppc_asm.h" + + .text + .global _zimage_start +_zimage_start: + + /* PPC errata 213: needed by Virtex-4 FX */ + mfccr0 0 + oris 0,0,0x50000000@h + mtccr0 0 + + /* + * Invalidate the data cache if the data cache is turned off. + * - The 405 core does not invalidate the data cache on power-up + * or reset but does turn off the data cache. We cannot assume + * that the cache contents are valid. + * - If the data cache is turned on this must have been done by + * a bootloader and we assume that the cache contents are + * valid. + */ + mfdccr r9 + cmplwi r9,0 + bne 2f + lis r9,0 + li r8,256 + mtctr r8 +1: dccci r0,r9 + addi r9,r9,0x20 + bdnz 1b +2: b _zimage_start_lib diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 8f8b8494d62..d6c96d9ab29 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -174,7 +174,7 @@ cuboot*) *-mpc83*) platformo=$object/cuboot-83xx.o ;; - *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555) + *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*) platformo=$object/cuboot-85xx-cpm2.o ;; *-mpc85*|*-tqm8540|*-sbc85*) @@ -199,6 +199,10 @@ adder875-redboot) platformo="$object/fixed-head.o $object/redboot-8xx.o" binary=y ;; +simpleboot-virtex405-*) + platformo="$object/virtex405-head.o $object/simpleboot.o" + binary=y + ;; esac vmz="$tmpdir/`basename \"$kernel\"`.$ext" @@ -226,10 +230,13 @@ if [ -n "$version" ]; then uboot_version="-n Linux-$version" fi +# physical offset of kernel image +membase=`${CROSS}objdump -p "$kernel" | grep -m 1 LOAD | awk '{print $7}'` + case "$platform" in uboot) rm -f "$ofile" - mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \ + mkimage -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \ $uboot_version -d "$vmz" "$ofile" if [ -z "$cacheit" ]; then rm -f "$vmz" @@ -298,15 +305,16 @@ treeboot*) exit 0 ;; ps3) - # The ps3's loader supports loading gzipped binary images from flash - # rom to addr zero. The loader enters the image at addr 0x100. A - # bootwrapper overlay is use to arrange for the kernel to be loaded - # to addr zero and to have a suitable bootwrapper entry at 0x100. - # To construct the rom image, 0x100 bytes from offset 0x100 in the - # kernel is copied to the bootwrapper symbol __system_reset_kernel. - # The 0x100 bytes at the bootwrapper symbol __system_reset_overlay is - # then copied to offset 0x100. At runtime the bootwrapper program - # copies the 0x100 bytes at __system_reset_kernel to addr 0x100. + # The ps3's loader supports loading a gzipped binary image from flash + # rom to ram addr zero. The loader then enters the system reset + # vector at addr 0x100. A bootwrapper overlay is used to arrange for + # a binary image of the kernel to be at addr zero, and yet have a + # suitable bootwrapper entry at 0x100. To construct the final rom + # image 512 bytes from offset 0x100 is copied to the bootwrapper + # place holder at symbol __system_reset_kernel. The 512 bytes of the + # bootwrapper entry code at symbol __system_reset_overlay is then + # copied to offset 0x100. At runtime the bootwrapper program copies + # the data at __system_reset_kernel back to addr 0x100. system_reset_overlay=0x`${CROSS}nm "$ofile" \ | grep ' __system_reset_overlay$' \ @@ -317,7 +325,7 @@ ps3) | cut -d' ' -f1` system_reset_kernel=`printf "%d" $system_reset_kernel` overlay_dest="256" - overlay_size="256" + overlay_size="512" ${CROSS}objcopy -O binary "$ofile" "$ofile.bin" diff --git a/arch/powerpc/configs/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig index e24240a9a04..e24240a9a04 100644 --- a/arch/powerpc/configs/ep405_defconfig +++ b/arch/powerpc/configs/40x/ep405_defconfig diff --git a/arch/powerpc/configs/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig index 2f475391f1d..2f475391f1d 100644 --- a/arch/powerpc/configs/kilauea_defconfig +++ b/arch/powerpc/configs/40x/kilauea_defconfig diff --git a/arch/powerpc/configs/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig index 9ef4d8a312c..9ef4d8a312c 100644 --- a/arch/powerpc/configs/makalu_defconfig +++ b/arch/powerpc/configs/40x/makalu_defconfig diff --git a/arch/powerpc/configs/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig index 3b2689e5002..3b2689e5002 100644 --- a/arch/powerpc/configs/walnut_defconfig +++ b/arch/powerpc/configs/40x/walnut_defconfig diff --git a/arch/powerpc/configs/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig index c44db554cdc..c44db554cdc 100644 --- a/arch/powerpc/configs/bamboo_defconfig +++ b/arch/powerpc/configs/44x/bamboo_defconfig diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig new file mode 100644 index 00000000000..a3b763c45ec --- /dev/null +++ b/arch/powerpc/configs/44x/canyonlands_defconfig @@ -0,0 +1,721 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25-rc1 +# Thu Feb 21 14:29:28 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +CONFIG_4xx=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_FAIR_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +# CONFIG_LOGBUFFER is not set +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_PPC4xx_PCI_EXPRESS=y + +# +# Platform support +# +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_BAMBOO is not set +# CONFIG_EBONY is not set +# CONFIG_SEQUOIA is not set +# CONFIG_TAISHAN is not set +# CONFIG_KATMAI is not set +# CONFIG_RAINIER is not set +# CONFIG_WARP is not set +CONFIG_CANYONLANDS=y +CONFIG_460EX=y +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +CONFIG_SECCOMP=y +CONFIG_WANT_DEVICE_TREE=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x01000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_NEW_EMAC=y +CONFIG_IBM_NEW_EMAC_RXB=256 +CONFIG_IBM_NEW_EMAC_TXB=256 +CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 +# CONFIG_IBM_NEW_EMAC_DEBUG is not set +CONFIG_IBM_NEW_EMAC_ZMII=y +CONFIG_IBM_NEW_EMAC_RGMII=y +CONFIG_IBM_NEW_EMAC_TAH=y +CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_DEBUGGER=y +# CONFIG_KGDB is not set +# CONFIG_XMON is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig index 07c8d4ce175..07c8d4ce175 100644 --- a/arch/powerpc/configs/ebony_defconfig +++ b/arch/powerpc/configs/44x/ebony_defconfig diff --git a/arch/powerpc/configs/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig index c8804ec01ea..c8804ec01ea 100644 --- a/arch/powerpc/configs/katmai_defconfig +++ b/arch/powerpc/configs/44x/katmai_defconfig diff --git a/arch/powerpc/configs/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig index dec18ca7351..dec18ca7351 100644 --- a/arch/powerpc/configs/rainier_defconfig +++ b/arch/powerpc/configs/44x/rainier_defconfig diff --git a/arch/powerpc/configs/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig index dd5d6303c39..dd5d6303c39 100644 --- a/arch/powerpc/configs/sequoia_defconfig +++ b/arch/powerpc/configs/44x/sequoia_defconfig diff --git a/arch/powerpc/configs/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig index 087aedce133..087aedce133 100644 --- a/arch/powerpc/configs/taishan_defconfig +++ b/arch/powerpc/configs/44x/taishan_defconfig diff --git a/arch/powerpc/configs/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig index 2313c3e8ef6..2313c3e8ef6 100644 --- a/arch/powerpc/configs/warp_defconfig +++ b/arch/powerpc/configs/44x/warp_defconfig diff --git a/arch/powerpc/configs/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 7a862a6e3be..7d18440e398 100644 --- a/arch/powerpc/configs/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:14 2008 +# Fri Apr 11 11:10:09 2008 # # CONFIG_PPC64 is not set @@ -196,6 +196,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -360,7 +361,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_OF_PARTS is not set +CONFIG_MTD_OF_PARTS=y # # User Modules And Translation Layers @@ -436,7 +437,7 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set -# CONFIG_MTD_NAND_FSL_ELBC is not set +CONFIG_MTD_NAND_FSL_ELBC=y # CONFIG_MTD_ONENAND is not set # @@ -1293,6 +1294,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking diff --git a/arch/powerpc/configs/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 1f57456dd81..1f57456dd81 100644 --- a/arch/powerpc/configs/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig diff --git a/arch/powerpc/configs/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index 50cceda8994..50cceda8994 100644 --- a/arch/powerpc/configs/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig diff --git a/arch/powerpc/configs/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index ac913025713..ac913025713 100644 --- a/arch/powerpc/configs/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index e1de399a7bd..e1de399a7bd 100644 --- a/arch/powerpc/configs/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig diff --git a/arch/powerpc/configs/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index b4e39cf82a8..b4e39cf82a8 100644 --- a/arch/powerpc/configs/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index b4e82c0e2be..b4e82c0e2be 100644 --- a/arch/powerpc/configs/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig diff --git a/arch/powerpc/configs/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index d50a96eddcd..d50a96eddcd 100644 --- a/arch/powerpc/configs/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig diff --git a/arch/powerpc/configs/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index f377cde785b..f377cde785b 100644 --- a/arch/powerpc/configs/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig diff --git a/arch/powerpc/configs/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index a6331769d88..a6331769d88 100644 --- a/arch/powerpc/configs/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig diff --git a/arch/powerpc/configs/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index 1f1518229f6..1f1518229f6 100644 --- a/arch/powerpc/configs/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig new file mode 100644 index 00000000000..2d0debcefdb --- /dev/null +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -0,0 +1,899 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24 +# Mon Feb 11 16:25:19 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set + +# +# Platform support +# +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_MPC85xx_CDS is not set +# CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC85xx_DS is not set +CONFIG_KSI8560=y +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set +# CONFIG_SBC8548 is not set +# CONFIG_SBC8560 is not set +# CONFIG_IPIC is not set +CONFIG_MPIC=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +CONFIG_CPM2=y +CONFIG_PPC_CPM_NEW_BINDING=y +# CONFIG_FSL_ULI1575 is not set +CONFIG_CPM=y + +# +# Kernel options +# +CONFIG_HIGHMEM=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_RCU_TRACE=y +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_PROC_DEVICETREE is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_WANT_DEVICE_TREE=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +# CONFIG_BLK_DEV_IDEDISK is not set +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +CONFIG_MDIO_BITBANG=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_FS_ENET=y +# CONFIG_FS_ENET_HAS_SCC is not set +CONFIG_FS_ENET_HAS_FCC=y +CONFIG_FS_ENET_MDIO_FCC=y +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +CONFIG_SERIAL_CPM_SCC1=y +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +# CONFIG_SERIAL_CPM_SMC1 is not set +# CONFIG_SERIAL_CPM_SMC2 is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_KGDB_CONSOLE is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_PPC_CLOCK is not set +CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index b998539da86..b998539da86 100644 --- a/arch/powerpc/configs/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig diff --git a/arch/powerpc/configs/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig index 418bcdb5f91..a9f113b243a 100644 --- a/arch/powerpc/configs/mpc8544_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig @@ -162,6 +162,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set CONFIG_MPC85xx_DS=y +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -202,6 +203,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -1255,7 +1257,19 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_DMADEVICES is not set +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_FSL_DMA=y +# CONFIG_FSL_DMA_SELFTEST is not set +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set # # Userspace I/O @@ -1447,6 +1461,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking diff --git a/arch/powerpc/configs/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 851ac911561..851ac911561 100644 --- a/arch/powerpc/configs/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig index 2b866b38560..2b866b38560 100644 --- a/arch/powerpc/configs/mpc8568mds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig diff --git a/arch/powerpc/configs/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig index 53aa6f3173a..53aa6f3173a 100644 --- a/arch/powerpc/configs/mpc8572_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig diff --git a/arch/powerpc/configs/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index a469fe91881..a469fe91881 100644 --- a/arch/powerpc/configs/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig diff --git a/arch/powerpc/configs/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 67f67978c74..67f67978c74 100644 --- a/arch/powerpc/configs/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig diff --git a/arch/powerpc/configs/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index fef605579e2..fef605579e2 100644 --- a/arch/powerpc/configs/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig diff --git a/arch/powerpc/configs/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index 1d303c49bb0..1d303c49bb0 100644 --- a/arch/powerpc/configs/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig diff --git a/arch/powerpc/configs/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index d39ee3b35bf..d39ee3b35bf 100644 --- a/arch/powerpc/configs/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig diff --git a/arch/powerpc/configs/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index cbf6ad2d71d..cbf6ad2d71d 100644 --- a/arch/powerpc/configs/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig diff --git a/arch/powerpc/configs/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index bbff962c847..bbff962c847 100644 --- a/arch/powerpc/configs/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig diff --git a/arch/powerpc/configs/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index 63c5ec8b651..63c5ec8b651 100644 --- a/arch/powerpc/configs/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig index 38b85b211c3..d7fd298bd23 100644 --- a/arch/powerpc/configs/chrp32_defconfig +++ b/arch/powerpc/configs/chrp32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.25-rc6 -# Thu Mar 20 10:33:36 2008 +# Thu Mar 27 13:55:37 2008 # # CONFIG_PPC64 is not set @@ -74,8 +74,6 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set -# CONFIG_USER_SCHED is not set -# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -243,7 +241,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -1328,6 +1326,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 0f82f66a60f..a20501f8947 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.25-rc6 -# Thu Mar 20 10:36:41 2008 +# Thu Mar 27 13:55:43 2008 # CONFIG_PPC64=y @@ -77,8 +77,6 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 # CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set -# CONFIG_USER_SCHED is not set -# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -276,7 +274,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -1596,6 +1594,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index 8d9a84f5015..b3128fb7ce7 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.25-rc6 -# Thu Mar 20 10:43:46 2008 +# Thu Mar 27 13:55:45 2008 # CONFIG_PPC64=y @@ -77,8 +77,6 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 # CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set -# CONFIG_USER_SCHED is not set -# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -261,7 +259,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -1065,6 +1063,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 8b810d05644..7a166a39d92 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -333,7 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -374,6 +374,7 @@ CONFIG_BLK_DEV_IDEDISK=y CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set CONFIG_IDE_TASK_IOCTL=y CONFIG_IDE_PROC_FS=y @@ -427,10 +428,129 @@ CONFIG_IDE_ARCH_OBSOLETE_INIT=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +CONFIG_SCSI_IPR=y +CONFIG_SCSI_IPR_TRACE=y +CONFIG_SCSI_IPR_DUMP=y +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +CONFIG_ATA=y +CONFIG_ATA_NONSTANDARD=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -536,6 +656,7 @@ CONFIG_USB_PEGASUS=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -783,12 +904,14 @@ CONFIG_USB_UHCI_HCD=y # # may also be needed; see USB_STORAGE Help for more information # +# CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set CONFIG_USB_MON=y # diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 029d2dab7de..9e0dd820169 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:25 2008 +# Linux kernel version: 2.6.25-rc9 +# Tue Apr 15 18:07:36 2008 # # CONFIG_PPC64 is not set @@ -201,6 +201,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -353,7 +354,90 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_OF_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_NAND_FSL_ELBC=y +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -362,6 +446,7 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 @@ -469,6 +554,15 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -563,6 +657,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set # # Miscellaneous I2C Chip support @@ -648,6 +743,11 @@ CONFIG_WATCHDOG=y CONFIG_83xx_WDT=y # +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y @@ -664,6 +764,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -686,6 +787,14 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -715,8 +824,55 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_R8A66597_HCD is not set # +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -792,6 +948,7 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -862,6 +1019,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index 558b0d348d4..fca114252ac 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.25-rc6 -# Thu Mar 20 11:05:14 2008 +# Thu Mar 27 13:56:21 2008 # # CONFIG_PPC64 is not set @@ -77,8 +77,6 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set -# CONFIG_USER_SCHED is not set -# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -272,7 +270,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set @@ -1895,6 +1893,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig new file mode 100644 index 00000000000..9d0140e3838 --- /dev/null +++ b/arch/powerpc/configs/ppc40x_defconfig @@ -0,0 +1,896 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25-rc9 +# Tue Apr 15 08:46:44 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +CONFIG_40x=y +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_4xx=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +CONFIG_PPC4xx_PCI_EXPRESS=y + +# +# Platform support +# +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_EP405=y +CONFIG_KILAUEA=y +CONFIG_MAKALU=y +CONFIG_WALNUT=y +CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y +CONFIG_405GP=y +CONFIG_405EX=y +CONFIG_XILINX_VIRTEX=y +CONFIG_XILINX_VIRTEX_II_PRO=y +CONFIG_XILINX_VIRTEX_4_FX=y +CONFIG_IBM405_ERR77=y +CONFIG_IBM405_ERR51=y +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_FSL_ULI1575 is not set +CONFIG_OF_RTC=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_NEW_EMAC=y +CONFIG_IBM_NEW_EMAC_RXB=128 +CONFIG_IBM_NEW_EMAC_TXB=64 +CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 +# CONFIG_IBM_NEW_EMAC_DEBUG is not set +CONFIG_IBM_NEW_EMAC_ZMII=y +CONFIG_IBM_NEW_EMAC_RGMII=y +# CONFIG_IBM_NEW_EMAC_TAH is not set +CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +CONFIG_XILINX_HWICAP=m +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index 57bd775ef77..12f9b5a8022 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Fri Feb 15 21:57:35 2008 +# Linux kernel version: 2.6.25-rc6 +# Sat Apr 5 09:35:48 2008 # # CONFIG_PPC64 is not set @@ -79,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -113,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -143,7 +145,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set CONFIG_PPC4xx_PCI_EXPRESS=y # @@ -161,12 +162,15 @@ CONFIG_TAISHAN=y CONFIG_KATMAI=y CONFIG_RAINIER=y CONFIG_WARP=y +CONFIG_CANYONLANDS=y +CONFIG_YOSEMITE=y CONFIG_440EP=y CONFIG_440EPX=y CONFIG_440GRX=y CONFIG_440GP=y CONFIG_440GX=y CONFIG_440SPe=y +CONFIG_460EX=y CONFIG_IBM440EP_ERR42=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -199,7 +203,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_RCU_TRACE is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y @@ -232,6 +235,7 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -678,6 +682,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # # Userspace I/O @@ -805,6 +810,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 880ab7ad10c..970282b1a00 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.25-rc6 -# Thu Mar 20 11:06:28 2008 +# Thu Mar 27 13:56:24 2008 # CONFIG_PPC64=y @@ -84,8 +84,6 @@ CONFIG_CGROUPS=y # CONFIG_CGROUP_NS is not set CONFIG_CPUSETS=y # CONFIG_GROUP_SCHED is not set -# CONFIG_USER_SCHED is not set -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUP_CPUACCT is not set # CONFIG_RESOURCE_COUNTERS is not set CONFIG_SYSFS_DEPRECATED=y @@ -289,6 +287,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set +# CONFIG_PHYP_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -335,7 +334,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set @@ -1881,6 +1880,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 755aca72b52..3e2593c60b1 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.25-rc6 -# Thu Mar 20 11:08:01 2008 +# Thu Mar 27 13:56:28 2008 # CONFIG_PPC64=y @@ -83,8 +83,6 @@ CONFIG_CGROUPS=y CONFIG_CGROUP_NS=y CONFIG_CPUSETS=y # CONFIG_GROUP_SCHED is not set -# CONFIG_USER_SCHED is not set -# CONFIG_CGROUP_SCHED is not set CONFIG_CGROUP_CPUACCT=y # CONFIG_RESOURCE_COUNTERS is not set CONFIG_SYSFS_DEPRECATED=y @@ -237,6 +235,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set +# CONFIG_PHYP_DUMP is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_NUMA=y CONFIG_NODES_SHIFT=4 @@ -283,7 +282,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set CONFIG_HOTPLUG_PCI=m @@ -1519,6 +1518,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig new file mode 100644 index 00000000000..3180125aa6c --- /dev/null +++ b/arch/powerpc/configs/sbc8641d_defconfig @@ -0,0 +1,1342 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25-rc6 +# Thu Apr 10 18:03:25 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_6xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_LOCKBREAK=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +CONFIG_GENERIC_TBSYNC=y +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# Platform support +# +# CONFIG_PPC_MULTIPLATFORM is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_86xx=y +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_MPC8641_HPCN is not set +CONFIG_SBC8641D=y +# CONFIG_MPC8610_HPCD is not set +CONFIG_MPC8641=y +# CONFIG_IPIC is not set +CONFIG_MPIC=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=m +CONFIG_FORCE_MAX_ZONEORDER=11 +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_IRQ_ALL_CPUS=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_PROC_DEVICETREE is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +# CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_ECN=m +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_MH is not set +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +# CONFIG_IP6_NF_TARGET_REJECT is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_RAW=m + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +CONFIG_TIPC=m +# CONFIG_TIPC_ADVANCED is not set +# CONFIG_TIPC_DEBUG is not set +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +CONFIG_WAN_ROUTER=m +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +# CONFIG_NET_SCH_RR is not set +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +# CONFIG_CLS_U32_PERF is not set +# CONFIG_CLS_U32_MARK is not set +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_SCH_FIFO=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_OF_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_NOSWAP is not set +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +CONFIG_MTD_CFI_LE_BYTE_SWAP=y +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=y +# CONFIG_MD_RAID456 is not set +CONFIG_MD_MULTIPATH=y +CONFIG_MD_FAULTY=y +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=y +CONFIG_DM_SNAPSHOT=y +CONFIG_DM_MIRROR=y +CONFIG_DM_ZERO=y +# CONFIG_DM_MULTIPATH is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +CONFIG_BROADCOM_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +# CONFIG_GFAR_NAPI is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +CONFIG_ATM_DRIVERS=y +# CONFIG_ATM_DUMMY is not set +# CONFIG_ATM_TCP is not set +# CONFIG_ATM_LANAI is not set +# CONFIG_ATM_ENI is not set +# CONFIG_ATM_FIRESTREAM is not set +# CONFIG_ATM_ZATM is not set +# CONFIG_ATM_NICSTAR is not set +# CONFIG_ATM_IDT77252 is not set +# CONFIG_ATM_AMBASSADOR is not set +# CONFIG_ATM_HORIZON is not set +# CONFIG_ATM_IA is not set +# CONFIG_ATM_FORE200E_MAYBE is not set +# CONFIG_ATM_HE is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m +CONFIG_PPPOATM=m +# CONFIG_PPPOL2TP is not set +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +# CONFIG_REISERFS_FS_SECURITY is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +CONFIG_OCFS2_FS=m +CONFIG_OCFS2_DEBUG_MASKLOG=y +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=m +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=m +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_DEBUGGER=y +# CONFIG_XMON is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +# CONFIG_SECURITY_NETWORK_XFRM is not set +CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_CAMELLIA is not set +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index b9dbfff9afe..ce1e8d24e74 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -67,6 +67,7 @@ obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o +obj-$(CONFIG_STACKTRACE) += stacktrace.o pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \ diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 4b749c41646..292c6d8db0e 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -26,8 +26,6 @@ #ifdef CONFIG_PPC64 #include <linux/time.h> #include <linux/hardirq.h> -#else -#include <linux/ptrace.h> #endif #include <asm/io.h> @@ -46,6 +44,9 @@ #include <asm/mmu.h> #include <asm/hvcall.h> #endif +#ifdef CONFIG_PPC_ISERIES +#include <asm/iseries/alpaca.h> +#endif #define DEFINE(sym, val) \ asm volatile("\n->" #sym " %0 " #val : : "i" (val)) @@ -60,7 +61,6 @@ int main(void) DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context)); #else DEFINE(THREAD_INFO, offsetof(struct task_struct, stack)); - DEFINE(PTRACE, offsetof(struct task_struct, ptrace)); #endif /* CONFIG_PPC64 */ DEFINE(KSP, offsetof(struct thread_struct, ksp)); @@ -80,7 +80,6 @@ int main(void) DEFINE(PGDIR, offsetof(struct thread_struct, pgdir)); #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0)); - DEFINE(PT_PTRACED, PT_PTRACED); #endif #ifdef CONFIG_SPE DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0])); @@ -325,6 +324,9 @@ int main(void) DEFINE(PAGE_OFFSET_VSID, KERNEL_VSID(PAGE_OFFSET)); DEFINE(VMALLOC_START_ESID, GET_ESID(VMALLOC_START)); DEFINE(VMALLOC_START_VSID, KERNEL_VSID(VMALLOC_START)); + + /* alpaca */ + DEFINE(ALPACA_SIZE, sizeof(struct alpaca)); #endif DEFINE(PGD_TABLE_SIZE, PGD_TABLE_SIZE); diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index 80e2eef05b2..9f937774549 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -7,6 +7,7 @@ #include <linux/string.h> #include <linux/init.h> #include <linux/module.h> +#include <linux/lmb.h> #include <asm/sections.h> #include <asm/prom.h> @@ -15,7 +16,7 @@ #include <asm/mmu.h> #include <asm/pgtable.h> #include <asm/io.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/processor.h> #include <asm/udbg.h> diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S index 6250443ab9c..5465e8de0e6 100644 --- a/arch/powerpc/kernel/cpu_setup_44x.S +++ b/arch/powerpc/kernel/cpu_setup_44x.S @@ -3,7 +3,7 @@ * Valentine Barshak <vbarshak@ru.mvista.com> * MontaVista Software, Inc (c) 2007 * - * Based on cpu_setup_6xx code by + * Based on cpu_setup_6xx code by * Benjamin Herrenschmidt <benh@kernel.crashing.org> * * This program is free software; you can redistribute it and/or @@ -32,6 +32,9 @@ _GLOBAL(__setup_cpu_440grx) bl __fixup_440A_mcheck mtlr r4 blr +_GLOBAL(__setup_cpu_460ex) +_GLOBAL(__setup_cpu_460gt) + b __init_fpu_44x _GLOBAL(__setup_cpu_440gx) _GLOBAL(__setup_cpu_440spe) b __fixup_440A_mcheck diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 2a8f5cc5184..26ffb44e270 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -36,6 +36,8 @@ extern void __setup_cpu_440epx(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec); +extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec); +extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec); @@ -1397,6 +1399,30 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_440A, .platform = "ppc440", }, + { /* 460EX */ + .pvr_mask = 0xffff0002, + .pvr_value = 0x13020002, + .cpu_name = "460EX", + .cpu_features = CPU_FTRS_44X, + .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, + .icache_bsize = 32, + .dcache_bsize = 32, + .cpu_setup = __setup_cpu_460ex, + .machine_check = machine_check_440A, + .platform = "ppc440", + }, + { /* 460GT */ + .pvr_mask = 0xffff0002, + .pvr_value = 0x13020000, + .cpu_name = "460GT", + .cpu_features = CPU_FTRS_44X, + .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, + .icache_bsize = 32, + .dcache_bsize = 32, + .cpu_setup = __setup_cpu_460gt, + .machine_check = machine_check_440A, + .platform = "ppc440", + }, #endif /* CONFIG_44x */ #ifdef CONFIG_FSL_BOOKE #ifdef CONFIG_E200 @@ -1512,7 +1538,7 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr) *t = *s; *PTRRELOC(&cur_cpu_spec) = &the_cpu_spec; #if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE) - /* ppc64 and booke expect identify_cpu to also call + /* ppc64 and booke expect identify_cpu to also call * setup_cpu for that processor. I will consolidate * that at a later time, for now, just use #ifdef. * we also don't need to PTRRELOC the function pointer diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 571132ed12c..eae401de3f7 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -24,12 +24,13 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/types.h> +#include <linux/lmb.h> #include <asm/processor.h> #include <asm/machdep.h> #include <asm/kexec.h> #include <asm/kdump.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/firmware.h> #include <asm/smp.h> #include <asm/system.h> diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 29ff77c468a..9ee3c5278db 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -13,8 +13,9 @@ #include <linux/crash_dump.h> #include <linux/bootmem.h> +#include <linux/lmb.h> #include <asm/kdump.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/firmware.h> #include <asm/uaccess.h> diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 69a91bd4611..84c86863306 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -110,9 +110,9 @@ transfer_to_handler: stw r11,PT_REGS(r12) #if defined(CONFIG_40x) || defined(CONFIG_BOOKE) /* Check to see if the dbcr0 register is set up to debug. Use the - single-step bit to do this. */ + internal debug mode bit to do this. */ lwz r12,THREAD_DBCR0(r12) - andis. r12,r12,DBCR0_IC@h + andis. r12,r12,DBCR0_IDM@h beq+ 3f /* From user and task is ptraced - load up global dbcr0 */ li r12,-1 /* clear all pending debug events */ @@ -120,6 +120,12 @@ transfer_to_handler: lis r11,global_dbcr0@ha tophys(r11,r11) addi r11,r11,global_dbcr0@l +#ifdef CONFIG_SMP + rlwinm r9,r1,0,0,(31-THREAD_SHIFT) + lwz r9,TI_CPU(r9) + slwi r9,r9,3 + add r11,r11,r9 +#endif lwz r12,0(r11) mtspr SPRN_DBCR0,r12 lwz r12,4(r11) @@ -238,10 +244,10 @@ ret_from_syscall: stw r11,_CCR(r1) syscall_exit_cont: #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) - /* If the process has its own DBCR0 value, load it up. The single - step bit tells us that dbcr0 should be loaded. */ + /* If the process has its own DBCR0 value, load it up. The internal + debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,DBCR0_IC@h + andis. r10,r0,DBCR0_IDM@h bnel- load_dbcr0 #endif #ifdef CONFIG_44x @@ -666,10 +672,10 @@ user_exc_return: /* r10 contains MSR_KERNEL here */ restore_user: #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) - /* Check whether this process has its own DBCR0 value. The single - step bit tells us that dbcr0 should be loaded. */ + /* Check whether this process has its own DBCR0 value. The internal + debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,DBCR0_IC@h + andis. r10,r0,DBCR0_IDM@h bnel- load_dbcr0 #endif @@ -879,6 +885,12 @@ load_dbcr0: mfspr r10,SPRN_DBCR0 lis r11,global_dbcr0@ha addi r11,r11,global_dbcr0@l +#ifdef CONFIG_SMP + rlwinm r9,r1,0,0,(31-THREAD_SHIFT) + lwz r9,TI_CPU(r9) + slwi r9,r9,3 + add r11,r11,r9 +#endif stw r10,0(r11) mtspr SPRN_DBCR0,r0 lwz r10,4(r11) @@ -891,7 +903,7 @@ load_dbcr0: .section .bss .align 4 global_dbcr0: - .space 8 + .space 8*NR_CPUS .previous #endif /* !(CONFIG_4xx || CONFIG_BOOKE) */ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 148a3547c9a..c0db5b769e5 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -29,6 +29,8 @@ #include <asm/cputable.h> #include <asm/firmware.h> #include <asm/bug.h> +#include <asm/ptrace.h> +#include <asm/irqflags.h> /* * System calls. @@ -39,7 +41,7 @@ /* This value is used to mark exception frames on the stack. */ exception_marker: - .tc ID_72656773_68657265[TC],0x7265677368657265 + .tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER .section ".text" .align 7 @@ -88,6 +90,14 @@ system_call_common: addi r9,r1,STACK_FRAME_OVERHEAD ld r11,exception_marker@toc(r2) std r11,-16(r9) /* "regshere" marker */ +#ifdef CONFIG_TRACE_IRQFLAGS + bl .trace_hardirqs_on + REST_GPR(0,r1) + REST_4GPRS(3,r1) + REST_2GPRS(7,r1) + addi r9,r1,STACK_FRAME_OVERHEAD + ld r12,_MSR(r1) +#endif /* CONFIG_TRACE_IRQFLAGS */ li r10,1 stb r10,PACASOFTIRQEN(r13) stb r10,PACAHARDIRQEN(r13) @@ -102,7 +112,7 @@ BEGIN_FW_FTR_SECTION b hardware_interrupt_entry 2: END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif +#endif /* CONFIG_PPC_ISERIES */ mfmsr r11 ori r11,r11,MSR_EE mtmsrd r11,1 @@ -504,6 +514,10 @@ BEGIN_FW_FTR_SECTION li r3,0 stb r3,PACASOFTIRQEN(r13) /* ensure we are soft-disabled */ +#ifdef CONFIG_TRACE_IRQFLAGS + bl .trace_hardirqs_off + mfmsr r10 +#endif ori r10,r10,MSR_EE mtmsrd r10 /* hard-enable again */ addi r3,r1,STACK_FRAME_OVERHEAD @@ -512,7 +526,7 @@ BEGIN_FW_FTR_SECTION 4: END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif - stb r5,PACASOFTIRQEN(r13) + TRACE_AND_RESTORE_IRQ(r5); /* extract EE bit and use it to restore paca->hard_enabled */ ld r3,_MSR(r1) @@ -580,6 +594,16 @@ do_work: bne restore /* here we are preempting the current task */ 1: +#ifdef CONFIG_TRACE_IRQFLAGS + bl .trace_hardirqs_on + /* Note: we just clobbered r10 which used to contain the previous + * MSR before the hard-disabling done by the caller of do_work. + * We don't have that value anymore, but it doesn't matter as + * we will hard-enable unconditionally, we can just reload the + * current MSR into r10 + */ + mfmsr r10 +#endif /* CONFIG_TRACE_IRQFLAGS */ li r0,1 stb r0,PACASOFTIRQEN(r13) stb r0,PACAHARDIRQEN(r13) diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 0f4fac51202..785af9b5659 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -30,6 +30,7 @@ #include <asm/thread_info.h> #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> +#include <asm/ptrace.h> /* 601 only have IBAT; cr0.eq is set on 601 when using this macro */ #define LOAD_BAT(n, reg, RA, RB) \ @@ -268,8 +269,8 @@ __secondary_hold_acknowledge: li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \ MTMSRD(r10); /* (except for mach check in rtas) */ \ stw r0,GPR0(r11); \ - lis r10,0x7265; /* put exception frame marker */ \ - addi r10,r10,0x6773; \ + lis r10,STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */ \ + addi r10,r10,STACK_FRAME_REGS_MARKER@l; \ stw r10,8(r11); \ SAVE_4GPRS(3, r11); \ SAVE_2GPRS(7, r11) @@ -763,23 +764,6 @@ load_up_altivec: b fast_exception_return /* - * AltiVec unavailable trap from kernel - print a message, but let - * the task use AltiVec in the kernel until it returns to user mode. - */ -KernelAltiVec: - lwz r3,_MSR(r1) - oris r3,r3,MSR_VEC@h - stw r3,_MSR(r1) /* enable use of AltiVec after return */ - lis r3,87f@h - ori r3,r3,87f@l - mr r4,r2 /* current */ - lwz r5,_NIP(r1) - bl printk - b ret_from_except -87: .string "AltiVec used in kernel (task=%p, pc=%x) \n" - .align 4,0 - -/* * giveup_altivec(tsk) * Disable AltiVec for the task given as the argument, * and save the AltiVec registers in its thread_struct. diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index ad071a146a8..b84ec6a2fc9 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -211,7 +211,7 @@ skpinv: addi r4,r4,1 /* Increment */ SET_IVOR(12, WatchdogTimer); SET_IVOR(13, DataTLBError); SET_IVOR(14, InstructionTLBError); - SET_IVOR(15, Debug); + SET_IVOR(15, DebugCrit); /* Establish the interrupt vector base */ lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ @@ -578,7 +578,7 @@ interrupt_base: b InstructionStorage /* Debug Interrupt */ - DEBUG_EXCEPTION + DEBUG_CRIT_EXCEPTION /* * Local functions diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index d3aee08e681..215973a2c8d 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -36,8 +36,7 @@ #include <asm/firmware.h> #include <asm/page_64.h> #include <asm/exception.h> - -#define DO_SOFT_DISABLE +#include <asm/irqflags.h> /* * We layout physical memory as follows: @@ -450,8 +449,8 @@ bad_stack: */ fast_exc_return_irq: /* restores irq state too */ ld r3,SOFTE(r1) + TRACE_AND_RESTORE_IRQ(r3); ld r12,_MSR(r1) - stb r3,PACASOFTIRQEN(r13) /* restore paca->soft_enabled */ rldicl r4,r12,49,63 /* get MSR_EE to LSB */ stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */ b 1f @@ -621,7 +620,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) mtlr r10 andi. r10,r12,MSR_RI /* check for unrecoverable exception */ - beq- unrecov_slb + beq- 2f .machine push .machine "power4" @@ -643,6 +642,22 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) rfid b . /* prevent speculative execution */ +2: +#ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION + b unrecov_slb +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) +#endif /* CONFIG_PPC_ISERIES */ + mfspr r11,SPRN_SRR0 + clrrdi r10,r13,32 + LOAD_HANDLER(r10,unrecov_slb) + mtspr SPRN_SRR0,r10 + mfmsr r10 + ori r10,r10,MSR_IR|MSR_DR|MSR_RI + mtspr SPRN_SRR1,r10 + rfid + b . + unrecov_slb: EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) DISABLE_INTS @@ -808,7 +823,7 @@ _STATIC(load_up_altivec) * Hash table stuff */ .align 7 -_GLOBAL(do_hash_page) +_STATIC(do_hash_page) std r3,_DAR(r1) std r4,_DSISR(r1) @@ -820,6 +835,27 @@ BEGIN_FTR_SECTION END_FTR_SECTION_IFCLR(CPU_FTR_SLB) /* + * On iSeries, we soft-disable interrupts here, then + * hard-enable interrupts so that the hash_page code can spin on + * the hash_table_lock without problems on a shared processor. + */ + DISABLE_INTS + + /* + * Currently, trace_hardirqs_off() will be called by DISABLE_INTS + * and will clobber volatile registers when irq tracing is enabled + * so we need to reload them. It may be possible to be smarter here + * and move the irq tracing elsewhere but let's keep it simple for + * now + */ +#ifdef CONFIG_TRACE_IRQFLAGS + ld r3,_DAR(r1) + ld r4,_DSISR(r1) + ld r5,_TRAP(r1) + ld r12,_MSR(r1) + clrrdi r5,r5,4 +#endif /* CONFIG_TRACE_IRQFLAGS */ + /* * We need to set the _PAGE_USER bit if MSR_PR is set or if we are * accessing a userspace segment (even from the kernel). We assume * kernel addresses always have the high bit set. @@ -832,13 +868,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */ /* - * On iSeries, we soft-disable interrupts here, then - * hard-enable interrupts so that the hash_page code can spin on - * the hash_table_lock without problems on a shared processor. - */ - DISABLE_INTS - - /* * r3 contains the faulting address * r4 contains the required access permissions * r5 contains the trap number @@ -848,7 +877,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) bl .hash_page /* build HPTE if possible */ cmpdi r3,0 /* see if hash_page succeeded */ -#ifdef DO_SOFT_DISABLE BEGIN_FW_FTR_SECTION /* * If we had interrupts soft-enabled at the point where the @@ -860,7 +888,7 @@ BEGIN_FW_FTR_SECTION */ beq 13f END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif + BEGIN_FW_FTR_SECTION /* * Here we have interrupts hard-disabled, so it is sufficient @@ -874,11 +902,12 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) /* * hash_page couldn't handle it, set soft interrupt enable back - * to what it was before the trap. Note that .local_irq_restore + * to what it was before the trap. Note that .raw_local_irq_restore * handles any interrupts pending at this point. */ ld r3,SOFTE(r1) - bl .local_irq_restore + TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f) + bl .raw_local_irq_restore b 11f /* Here we have a page fault that hash_page can't handle. */ @@ -1477,6 +1506,10 @@ _INIT_STATIC(start_here_multiplatform) addi r2,r2,0x4000 add r2,r2,r26 + /* Set initial ptr to current */ + LOAD_REG_IMMEDIATE(r4, init_task) + std r4,PACACURRENT(r13) + /* Do very early kernel initializations, including initial hash table, * stab and slb setup before we turn on relocation. */ @@ -1505,10 +1538,6 @@ _INIT_GLOBAL(start_here_common) li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) - /* ptr to current */ - LOAD_REG_IMMEDIATE(r4, init_task) - std r4,PACACURRENT(r13) - /* Load the TOC */ ld r2,PACATOC(r13) std r1,PACAKSAVE(r13) diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h index ba9393f8e77..aefafc6330c 100644 --- a/arch/powerpc/kernel/head_booke.h +++ b/arch/powerpc/kernel/head_booke.h @@ -56,8 +56,17 @@ * is necessary since the MMU is always on, for Book-E parts, and the stacks * are offset from KERNELBASE. * + * There is some space optimization to be had here if desired. However + * to allow for a common kernel with support for debug exceptions either + * going to critical or their own debug level we aren't currently + * providing configurations that micro-optimize space usage. */ -#define BOOKE_EXCEPTION_STACK_SIZE (8192) +#ifdef CONFIG_44x +#define NUM_EXCEPTION_LVLS 2 +#else +#define NUM_EXCEPTION_LVLS 3 +#endif +#define BOOKE_EXCEPTION_STACK_SIZE (4096 * NUM_EXCEPTION_LVLS) /* CRIT_SPRG only used in critical exception handling */ #define CRIT_SPRG SPRN_SPRG2 @@ -68,7 +77,7 @@ #define CRIT_STACK_TOP (exception_stack_top) /* only on e200 for now */ -#define DEBUG_STACK_TOP (exception_stack_top - 4096) +#define DEBUG_STACK_TOP (exception_stack_top - 8192) #define DEBUG_SPRG SPRN_SPRG6W #ifdef CONFIG_SMP @@ -212,9 +221,8 @@ label: * save (and later restore) the MSR via SPRN_CSRR1, which will still have * the MSR_DE bit set. */ -#ifdef CONFIG_E200 -#define DEBUG_EXCEPTION \ - START_EXCEPTION(Debug); \ +#define DEBUG_DEBUG_EXCEPTION \ + START_EXCEPTION(DebugDebug); \ DEBUG_EXCEPTION_PROLOG; \ \ /* \ @@ -234,8 +242,8 @@ label: cmplw r12,r10; \ blt+ 2f; /* addr below exception vectors */ \ \ - lis r10,Debug@h; \ - ori r10,r10,Debug@l; \ + lis r10,DebugDebug@h; \ + ori r10,r10,DebugDebug@l; \ cmplw r12,r10; \ bgt+ 2f; /* addr above exception vectors */ \ \ @@ -265,9 +273,9 @@ label: 2: mfspr r4,SPRN_DBSR; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc) -#else -#define DEBUG_EXCEPTION \ - START_EXCEPTION(Debug); \ + +#define DEBUG_CRIT_EXCEPTION \ + START_EXCEPTION(DebugCrit); \ CRITICAL_EXCEPTION_PROLOG; \ \ /* \ @@ -287,8 +295,8 @@ label: cmplw r12,r10; \ blt+ 2f; /* addr below exception vectors */ \ \ - lis r10,Debug@h; \ - ori r10,r10,Debug@l; \ + lis r10,DebugCrit@h; \ + ori r10,r10,DebugCrit@l; \ cmplw r12,r10; \ bgt+ 2f; /* addr above exception vectors */ \ \ @@ -318,7 +326,6 @@ label: 2: mfspr r4,SPRN_DBSR; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc) -#endif #define INSTRUCTION_STORAGE_EXCEPTION \ START_EXCEPTION(InstructionStorage) \ diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index d9cc2c288d9..4ff74414356 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -68,7 +68,9 @@ _ENTRY(_start); mr r29,r5 mr r28,r6 mr r27,r7 + li r25,0 /* phys kernel start (low) */ li r24,0 /* CPU number */ + li r23,0 /* phys kernel start (high) */ /* We try to not make any assumptions about how the boot loader * setup or used the TLBs. We invalidate all mappings from the @@ -167,7 +169,28 @@ skpinv: addi r6,r6,1 /* Increment */ mtspr SPRN_MAS0,r7 tlbre - /* Just modify the entry ID, EPN and RPN for the temp mapping */ + /* grab and fixup the RPN */ + mfspr r6,SPRN_MAS1 /* extract MAS1[SIZE] */ + rlwinm r6,r6,25,27,30 + li r8,-1 + addi r6,r6,10 + slw r6,r8,r6 /* convert to mask */ + + bl 1f /* Find our address */ +1: mflr r7 + + mfspr r8,SPRN_MAS3 +#ifdef CONFIG_PHYS_64BIT + mfspr r23,SPRN_MAS7 +#endif + and r8,r6,r8 + subfic r9,r6,-4096 + and r9,r9,r7 + + or r25,r8,r9 + ori r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR) + + /* Just modify the entry ID and EPN for the temp mapping */ lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ mtspr SPRN_MAS0,r7 @@ -177,12 +200,10 @@ skpinv: addi r6,r6,1 /* Increment */ ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l mtspr SPRN_MAS1,r6 mfspr r6,SPRN_MAS2 - lis r7,PHYSICAL_START@h + li r7,0 /* temp EPN = 0 */ rlwimi r7,r6,0,20,31 mtspr SPRN_MAS2,r7 - mfspr r6,SPRN_MAS3 - rlwimi r7,r6,0,20,31 - mtspr SPRN_MAS3,r7 + mtspr SPRN_MAS3,r8 tlbwe xori r6,r4,1 @@ -232,8 +253,7 @@ skpinv: addi r6,r6,1 /* Increment */ ori r6,r6,PAGE_OFFSET@l rlwimi r6,r7,0,20,31 mtspr SPRN_MAS2,r6 - li r7,(MAS3_SX|MAS3_SW|MAS3_SR) - mtspr SPRN_MAS3,r7 + mtspr SPRN_MAS3,r8 tlbwe /* 7. Jump to KERNELBASE mapping */ @@ -283,7 +303,10 @@ skpinv: addi r6,r6,1 /* Increment */ SET_IVOR(12, WatchdogTimer); SET_IVOR(13, DataTLBError); SET_IVOR(14, InstructionTLBError); - SET_IVOR(15, Debug); + SET_IVOR(15, DebugDebug); +#if defined(CONFIG_E500) + SET_IVOR(15, DebugCrit); +#endif SET_IVOR(32, SPEUnavailable); SET_IVOR(33, SPEFloatingPointData); SET_IVOR(34, SPEFloatingPointRound); @@ -718,7 +741,10 @@ interrupt_base: /* Debug Interrupt */ - DEBUG_EXCEPTION + DEBUG_DEBUG_EXCEPTION +#if defined(CONFIG_E500) + DEBUG_CRIT_EXCEPTION +#endif /* * Local functions diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index 2f50bb5d00f..9971159c804 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -183,7 +183,7 @@ static int ibmebus_create_devices(const struct of_device_id *matches) ret = ibmebus_create_device(child); if (ret) { printk(KERN_ERR "%s: failed to create device (%i)", - __FUNCTION__, ret); + __func__, ret); of_node_put(child); break; } @@ -269,7 +269,7 @@ static ssize_t ibmebus_store_probe(struct bus_type *bus, if (bus_find_device(&ibmebus_bus_type, NULL, path, ibmebus_match_path)) { printk(KERN_WARNING "%s: %s has already been probed\n", - __FUNCTION__, path); + __func__, path); rc = -EEXIST; goto out; } @@ -279,7 +279,7 @@ static ssize_t ibmebus_store_probe(struct bus_type *bus, of_node_put(dn); } else { printk(KERN_WARNING "%s: no such device node: %s\n", - __FUNCTION__, path); + __func__, path); rc = -ENODEV; } @@ -308,7 +308,7 @@ static ssize_t ibmebus_store_remove(struct bus_type *bus, return count; } else { printk(KERN_WARNING "%s: %s not on the bus\n", - __FUNCTION__, path); + __func__, path); kfree(path); return -ENODEV; @@ -337,14 +337,14 @@ static int __init ibmebus_bus_init(void) err = of_bus_type_init(&ibmebus_bus_type, "ibmebus"); if (err) { printk(KERN_ERR "%s: failed to register IBM eBus.\n", - __FUNCTION__); + __func__); return err; } err = device_register(&ibmebus_bus_device); if (err) { printk(KERN_WARNING "%s: device_register returned %i\n", - __FUNCTION__, err); + __func__, err); bus_unregister(&ibmebus_bus_type); return err; diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 8f1f4e539c4..0c663669bc3 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -520,7 +520,7 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name) unsigned int order; if (!tbl || !tbl->it_map) { - printk(KERN_ERR "%s: expected TCE map for %s\n", __FUNCTION__, + printk(KERN_ERR "%s: expected TCE map for %s\n", __func__, node_name); return; } @@ -530,7 +530,7 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name) for (i = 0; i < (tbl->it_size/64); i++) { if (tbl->it_map[i] != 0) { printk(KERN_WARNING "%s: Unexpected TCEs for %s\n", - __FUNCTION__, node_name); + __func__, node_name); break; } } diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 292163f5b39..425616f92d1 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -114,7 +114,7 @@ static inline void set_soft_enabled(unsigned long enable) : : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled))); } -void local_irq_restore(unsigned long en) +void raw_local_irq_restore(unsigned long en) { /* * get_paca()->soft_enabled = en; @@ -174,6 +174,7 @@ void local_irq_restore(unsigned long en) __hard_irq_enable(); } +EXPORT_SYMBOL(raw_local_irq_restore); #endif /* CONFIG_PPC64 */ int show_interrupts(struct seq_file *p, void *v) @@ -310,8 +311,21 @@ void do_IRQ(struct pt_regs *regs) handler = &__do_IRQ; irqtp->task = curtp->task; irqtp->flags = 0; + + /* Copy the softirq bits in preempt_count so that the + * softirq checks work in the hardirq context. + */ + irqtp->preempt_count = + (irqtp->preempt_count & ~SOFTIRQ_MASK) | + (curtp->preempt_count & SOFTIRQ_MASK); + call_handle_irq(irq, desc, irqtp, handler); irqtp->task = NULL; + + + /* Set any flag that may have been set on the + * alternate stack + */ if (irqtp->flags) set_bits(irqtp->flags, &curtp->flags); } else @@ -357,7 +371,7 @@ void irq_ctx_init(void) memset((void *)softirq_ctx[i], 0, THREAD_SIZE); tp = softirq_ctx[i]; tp->cpu = i; - tp->preempt_count = SOFTIRQ_OFFSET; + tp->preempt_count = 0; memset((void *)hardirq_ctx[i], 0, THREAD_SIZE); tp = hardirq_ctx[i]; diff --git a/arch/powerpc/kernel/isa-bridge.c b/arch/powerpc/kernel/isa-bridge.c index ee172aa42aa..289af348978 100644 --- a/arch/powerpc/kernel/isa-bridge.c +++ b/arch/powerpc/kernel/isa-bridge.c @@ -80,13 +80,13 @@ static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node, * (size depending on dev->n_addr_cells) * cell 5: the size of the range */ - if ((range->isa_addr.a_hi && ISA_SPACE_MASK) != ISA_SPACE_IO) { + if ((range->isa_addr.a_hi & ISA_SPACE_MASK) != ISA_SPACE_IO) { range++; rlen -= sizeof(struct isa_range); if (rlen < sizeof(struct isa_range)) goto inval_range; } - if ((range->isa_addr.a_hi && ISA_SPACE_MASK) != ISA_SPACE_IO) + if ((range->isa_addr.a_hi & ISA_SPACE_MASK) != ISA_SPACE_IO) goto inval_range; isa_addr = range->isa_addr.a_lo; @@ -99,7 +99,7 @@ static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node, */ if ((pci_addr != 0) || (isa_addr != 0)) { printk(KERN_ERR "unexpected isa to pci mapping: %s\n", - __FUNCTION__); + __func__); return; } diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index dcb89a88df4..1ffacc698ff 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -226,7 +226,7 @@ static void parse_system_parameter_string(struct seq_file *m) unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL); if (!local_buffer) { printk(KERN_ERR "%s %s kmalloc failure at line %d \n", - __FILE__, __FUNCTION__, __LINE__); + __FILE__, __func__, __LINE__); return; } @@ -243,14 +243,14 @@ static void parse_system_parameter_string(struct seq_file *m) if (call_status != 0) { printk(KERN_INFO "%s %s Error calling get-system-parameter (0x%x)\n", - __FILE__, __FUNCTION__, call_status); + __FILE__, __func__, call_status); } else { int splpar_strlen; int idx, w_idx; char *workbuffer = kzalloc(SPLPAR_MAXLENGTH, GFP_KERNEL); if (!workbuffer) { printk(KERN_ERR "%s %s kmalloc failure at line %d \n", - __FILE__, __FUNCTION__, __LINE__); + __FILE__, __func__, __LINE__); kfree(local_buffer); return; } @@ -484,10 +484,10 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, current_weight = (resource >> 5 * 8) & 0xFF; pr_debug("%s: current_entitled = %lu, current_weight = %u\n", - __FUNCTION__, current_entitled, current_weight); + __func__, current_entitled, current_weight); pr_debug("%s: new_entitled = %lu, new_weight = %u\n", - __FUNCTION__, *new_entitled_ptr, *new_weight_ptr); + __func__, *new_entitled_ptr, *new_weight_ptr); retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr, *new_weight_ptr); @@ -502,7 +502,7 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, retval = -EINVAL; } else { printk(KERN_WARNING "%s: received unknown hv return code %ld", - __FUNCTION__, retval); + __func__, retval); retval = -EIO; } diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index c0c8e8c3ced..2d202f274e7 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -12,8 +12,9 @@ #include <linux/kexec.h> #include <linux/reboot.h> #include <linux/threads.h> +#include <linux/lmb.h> #include <asm/machdep.h> -#include <asm/lmb.h> +#include <asm/prom.h> void machine_crash_shutdown(struct pt_regs *regs) { diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index 55f1a25085c..ac163bd46cf 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -15,7 +15,6 @@ #include <asm/ptrace.h> #include <asm/page.h> #include <asm/lppaca.h> -#include <asm/iseries/it_lp_reg_save.h> #include <asm/paca.h> #include <asm/mmu.h> @@ -25,13 +24,13 @@ extern unsigned long __toc_start; /* - * iSeries structure which the hypervisor knows about - this structure + * The structure which the hypervisor knows about - this structure * should not cross a page boundary. The vpa_init/register_vpa call * is now known to fail if the lppaca structure crosses a page - * boundary. The lppaca is also used on POWER5 pSeries boxes. The - * lppaca is 640 bytes long, and cannot readily change since the - * hypervisor knows its layout, so a 1kB alignment will suffice to - * ensure that it doesn't cross a page boundary. + * boundary. The lppaca is also used on legacy iSeries and POWER5 + * pSeries boxes. The lppaca is 640 bytes long, and cannot readily + * change since the hypervisor knows its layout, so a 1kB alignment + * will suffice to ensure that it doesn't cross a page boundary. */ struct lppaca lppaca[] = { [0 ... (NR_CPUS-1)] = { @@ -66,32 +65,17 @@ struct slb_shadow slb_shadow[] __cacheline_aligned = { * processors. The processor VPD array needs one entry per physical * processor (not thread). */ -#define PACA_INIT_COMMON(number) \ +#define PACA_INIT(number) \ +{ \ .lppaca_ptr = &lppaca[number], \ .lock_token = 0x8000, \ .paca_index = (number), /* Paca Index */ \ .kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \ .hw_cpu_id = 0xffff, \ - .slb_shadow_ptr = &slb_shadow[number], - -#ifdef CONFIG_PPC_ISERIES -#define PACA_INIT_ISERIES(number) \ - .reg_save_ptr = &iseries_reg_save[number], - -#define PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number) \ - PACA_INIT_ISERIES(number) \ + .slb_shadow_ptr = &slb_shadow[number], \ + .__current = &init_task, \ } -#else -#define PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number) \ -} - -#endif - struct paca_struct paca[] = { PACA_INIT(0), #if NR_CPUS > 1 diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 89c83ccb85c..063cdd41304 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1161,41 +1161,9 @@ EXPORT_SYMBOL_GPL(pcibios_claim_one_bus); int pcibios_enable_device(struct pci_dev *dev, int mask) { - u16 cmd, old_cmd; - int idx; - struct resource *r; - if (ppc_md.pcibios_enable_device_hook) if (ppc_md.pcibios_enable_device_hook(dev)) return -EINVAL; - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { - /* Only set up the requested stuff */ - if (!(mask & (1 << idx))) - continue; - r = &dev->resource[idx]; - if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) - continue; - if ((idx == PCI_ROM_RESOURCE) && - (!(r->flags & IORESOURCE_ROM_ENABLE))) - continue; - if (r->parent == NULL) { - printk(KERN_ERR "PCI: Device %s not available because" - " of resource collisions\n", pci_name(dev)); - return -EINVAL; - } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - if (cmd != old_cmd) { - printk("PCI: Enabling device %s (%04x -> %04x)\n", - pci_name(dev), old_cmd, cmd); - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - return 0; + return pci_enable_resources(dev, mask); } - diff --git a/arch/powerpc/kernel/ppc32.h b/arch/powerpc/kernel/ppc32.h index 90e56277179..fda05e2211d 100644 --- a/arch/powerpc/kernel/ppc32.h +++ b/arch/powerpc/kernel/ppc32.h @@ -135,4 +135,6 @@ struct ucontext32 { struct mcontext32 uc_mcontext; }; +extern int copy_siginfo_to_user32(struct compat_siginfo __user *d, siginfo_t *s); + #endif /* _PPC64_PPC32_H */ diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 65d14e6ddc3..09fcb50c45a 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -44,10 +44,6 @@ #include <asm/signal.h> #include <asm/dcr.h> -#ifdef CONFIG_PPC64 -EXPORT_SYMBOL(local_irq_restore); -#endif - #ifdef CONFIG_PPC32 extern void transfer_to_handler(void); extern void do_IRQ(struct pt_regs *regs); @@ -57,7 +53,6 @@ extern void program_check_exception(struct pt_regs *regs); extern void single_step_exception(struct pt_regs *regs); extern int sys_sigreturn(struct pt_regs *regs); -EXPORT_SYMBOL(empty_zero_page); EXPORT_SYMBOL(clear_pages); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(ISA_DMA_THRESHOLD); @@ -78,6 +73,7 @@ EXPORT_SYMBOL(strncpy); EXPORT_SYMBOL(strcat); EXPORT_SYMBOL(strlen); EXPORT_SYMBOL(strcmp); +EXPORT_SYMBOL(strncmp); EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_generic); @@ -191,3 +187,4 @@ EXPORT_SYMBOL(intercept_table); EXPORT_SYMBOL(__mtdcr); EXPORT_SYMBOL(__mfdcr); #endif +EXPORT_SYMBOL(empty_zero_page); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 4ec60552150..703100d5e45 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -868,11 +868,6 @@ int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2, flush_spe_to_thread(current); error = do_execve(filename, (char __user * __user *) a1, (char __user * __user *) a2, regs); - if (error == 0) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; - task_unlock(current); - } putname(filename); out: return error; @@ -919,20 +914,6 @@ int validate_sp(unsigned long sp, struct task_struct *p, return valid_irq_stack(sp, p, nbytes); } -#ifdef CONFIG_PPC64 -#define MIN_STACK_FRAME 112 /* same as STACK_FRAME_OVERHEAD, in fact */ -#define FRAME_LR_SAVE 2 -#define INT_FRAME_SIZE (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD + 288) -#define REGS_MARKER 0x7265677368657265ul -#define FRAME_MARKER 12 -#else -#define MIN_STACK_FRAME 16 -#define FRAME_LR_SAVE 1 -#define INT_FRAME_SIZE (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD) -#define REGS_MARKER 0x72656773ul -#define FRAME_MARKER 2 -#endif - EXPORT_SYMBOL(validate_sp); unsigned long get_wchan(struct task_struct *p) @@ -944,15 +925,15 @@ unsigned long get_wchan(struct task_struct *p) return 0; sp = p->thread.ksp; - if (!validate_sp(sp, p, MIN_STACK_FRAME)) + if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD)) return 0; do { sp = *(unsigned long *)sp; - if (!validate_sp(sp, p, MIN_STACK_FRAME)) + if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD)) return 0; if (count > 0) { - ip = ((unsigned long *)sp)[FRAME_LR_SAVE]; + ip = ((unsigned long *)sp)[STACK_FRAME_LR_SAVE]; if (!in_sched_functions(ip)) return ip; } @@ -981,12 +962,12 @@ void show_stack(struct task_struct *tsk, unsigned long *stack) lr = 0; printk("Call Trace:\n"); do { - if (!validate_sp(sp, tsk, MIN_STACK_FRAME)) + if (!validate_sp(sp, tsk, STACK_FRAME_OVERHEAD)) return; stack = (unsigned long *) sp; newsp = stack[0]; - ip = stack[FRAME_LR_SAVE]; + ip = stack[STACK_FRAME_LR_SAVE]; if (!firstframe || ip != lr) { printk("["REG"] ["REG"] ", sp, ip); print_symbol("%s", ip); @@ -1000,8 +981,8 @@ void show_stack(struct task_struct *tsk, unsigned long *stack) * See if this is an exception frame. * We look for the "regshere" marker in the current frame. */ - if (validate_sp(sp, tsk, INT_FRAME_SIZE) - && stack[FRAME_MARKER] == REGS_MARKER) { + if (validate_sp(sp, tsk, STACK_INT_FRAME_SIZE) + && stack[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) { struct pt_regs *regs = (struct pt_regs *) (sp + STACK_FRAME_OVERHEAD); printk("--- Exception: %lx", regs->trap); diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index eac97f48b9b..3bfe7837e82 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -31,10 +31,10 @@ #include <linux/kexec.h> #include <linux/debugfs.h> #include <linux/irq.h> +#include <linux/lmb.h> #include <asm/prom.h> #include <asm/rtas.h> -#include <asm/lmb.h> #include <asm/page.h> #include <asm/processor.h> #include <asm/irq.h> @@ -51,6 +51,7 @@ #include <asm/machdep.h> #include <asm/pSeries_reconfig.h> #include <asm/pci-bridge.h> +#include <asm/phyp_dump.h> #include <asm/kexec.h> #ifdef DEBUG @@ -436,7 +437,7 @@ early_param("mem", early_parse_mem); * The device tree may be allocated beyond our memory limit, or inside the * crash kernel region for kdump. If so, move it out of the way. */ -static void move_device_tree(void) +static void __init move_device_tree(void) { unsigned long start, size; void *p; @@ -1040,6 +1041,87 @@ static void __init early_reserve_mem(void) #endif } +#ifdef CONFIG_PHYP_DUMP +/** + * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg + * + * Function to find the largest size we need to reserve + * during early boot process. + * + * It either looks for boot param and returns that OR + * returns larger of 256 or 5% rounded down to multiples of 256MB. + * + */ +static inline unsigned long phyp_dump_calculate_reserve_size(void) +{ + unsigned long tmp; + + if (phyp_dump_info->reserve_bootvar) + return phyp_dump_info->reserve_bootvar; + + /* divide by 20 to get 5% of value */ + tmp = lmb_end_of_DRAM(); + do_div(tmp, 20); + + /* round it down in multiples of 256 */ + tmp = tmp & ~0x0FFFFFFFUL; + + return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END); +} + +/** + * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory + * + * This routine may reserve memory regions in the kernel only + * if the system is supported and a dump was taken in last + * boot instance or if the hardware is supported and the + * scratch area needs to be setup. In other instances it returns + * without reserving anything. The memory in case of dump being + * active is freed when the dump is collected (by userland tools). + */ +static void __init phyp_dump_reserve_mem(void) +{ + unsigned long base, size; + unsigned long variable_reserve_size; + + if (!phyp_dump_info->phyp_dump_configured) { + printk(KERN_ERR "Phyp-dump not supported on this hardware\n"); + return; + } + + if (!phyp_dump_info->phyp_dump_at_boot) { + printk(KERN_INFO "Phyp-dump disabled at boot time\n"); + return; + } + + variable_reserve_size = phyp_dump_calculate_reserve_size(); + + if (phyp_dump_info->phyp_dump_is_active) { + /* Reserve *everything* above RMR.Area freed by userland tools*/ + base = variable_reserve_size; + size = lmb_end_of_DRAM() - base; + + /* XXX crashed_ram_end is wrong, since it may be beyond + * the memory_limit, it will need to be adjusted. */ + lmb_reserve(base, size); + + phyp_dump_info->init_reserve_start = base; + phyp_dump_info->init_reserve_size = size; + } else { + size = phyp_dump_info->cpu_state_size + + phyp_dump_info->hpte_region_size + + variable_reserve_size; + base = lmb_end_of_DRAM() - size; + lmb_reserve(base, size); + phyp_dump_info->init_reserve_start = base; + phyp_dump_info->init_reserve_size = size; + } +} +#else +static inline void __init phyp_dump_reserve_mem(void) {} +#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */ + + void __init early_init_devtree(void *params) { DBG(" -> early_init_devtree(%p)\n", params); @@ -1052,6 +1134,11 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_rtas, NULL); #endif +#ifdef CONFIG_PHYP_DUMP + /* scan tree to see if dump occured during last boot */ + of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL); +#endif + /* Retrieve various informations from the /chosen node of the * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... @@ -1072,6 +1159,7 @@ void __init early_init_devtree(void *params) reserve_kdump_trampoline(); reserve_crashkernel(); early_reserve_mem(); + phyp_dump_reserve_mem(); lmb_enforce_memory_limit(memory_limit); lmb_analyze(); @@ -1244,12 +1332,14 @@ EXPORT_SYMBOL(of_node_put); */ void of_attach_node(struct device_node *np) { - write_lock(&devtree_lock); + unsigned long flags; + + write_lock_irqsave(&devtree_lock, flags); np->sibling = np->parent->child; np->allnext = allnodes; np->parent->child = np; allnodes = np; - write_unlock(&devtree_lock); + write_unlock_irqrestore(&devtree_lock, flags); } /* @@ -1260,8 +1350,9 @@ void of_attach_node(struct device_node *np) void of_detach_node(struct device_node *np) { struct device_node *parent; + unsigned long flags; - write_lock(&devtree_lock); + write_lock_irqsave(&devtree_lock, flags); parent = np->parent; if (!parent) @@ -1292,7 +1383,7 @@ void of_detach_node(struct device_node *np) of_node_set_flag(np, OF_DETACHED); out_unlock: - write_unlock(&devtree_lock); + write_unlock_irqrestore(&devtree_lock, flags); } #ifdef CONFIG_PPC_PSERIES @@ -1373,20 +1464,21 @@ __initcall(prom_reconfig_setup); int prom_add_property(struct device_node* np, struct property* prop) { struct property **next; + unsigned long flags; prop->next = NULL; - write_lock(&devtree_lock); + write_lock_irqsave(&devtree_lock, flags); next = &np->properties; while (*next) { if (strcmp(prop->name, (*next)->name) == 0) { /* duplicate ! don't insert it */ - write_unlock(&devtree_lock); + write_unlock_irqrestore(&devtree_lock, flags); return -1; } next = &(*next)->next; } *next = prop; - write_unlock(&devtree_lock); + write_unlock_irqrestore(&devtree_lock, flags); #ifdef CONFIG_PROC_DEVICETREE /* try to add to proc as well if it was initialized */ @@ -1406,9 +1498,10 @@ int prom_add_property(struct device_node* np, struct property* prop) int prom_remove_property(struct device_node *np, struct property *prop) { struct property **next; + unsigned long flags; int found = 0; - write_lock(&devtree_lock); + write_lock_irqsave(&devtree_lock, flags); next = &np->properties; while (*next) { if (*next == prop) { @@ -1421,7 +1514,7 @@ int prom_remove_property(struct device_node *np, struct property *prop) } next = &(*next)->next; } - write_unlock(&devtree_lock); + write_unlock_irqrestore(&devtree_lock, flags); if (!found) return -ENODEV; @@ -1447,9 +1540,10 @@ int prom_update_property(struct device_node *np, struct property *oldprop) { struct property **next; + unsigned long flags; int found = 0; - write_lock(&devtree_lock); + write_lock_irqsave(&devtree_lock, flags); next = &np->properties; while (*next) { if (*next == oldprop) { @@ -1463,7 +1557,7 @@ int prom_update_property(struct device_node *np, } next = &(*next)->next; } - write_unlock(&devtree_lock); + write_unlock_irqrestore(&devtree_lock, flags); if (!found) return -ENODEV; diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 5ab4c8466cc..6d6df1e6032 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2240,6 +2240,14 @@ static void __init fixup_device_tree_efika(void) if (rv != PROM_ERROR && (strcmp(prop, "chrp") == 0)) prom_setprop(node, "/", "device_type", "efika", sizeof("efika")); + /* CODEGEN,description is exposed in /proc/cpuinfo so + fix that too */ + rv = prom_getprop(node, "CODEGEN,description", prop, sizeof(prop)); + if (rv != PROM_ERROR && (strstr(prop, "CHRP"))) + prom_setprop(node, "/", "CODEGEN,description", + "Efika 5200B PowerPC System", + sizeof("Efika 5200B PowerPC System")); + /* Fixup bestcomm interrupts property */ node = call_prom("finddevice", 1, 1, ADDR("/builtin/bestcomm")); if (PHANDLE_VALID(node)) { diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c index 4c1de6af4c0..9d30e10970a 100644 --- a/arch/powerpc/kernel/ptrace32.c +++ b/arch/powerpc/kernel/ptrace32.c @@ -29,12 +29,15 @@ #include <linux/security.h> #include <linux/signal.h> #include <linux/compat.h> +#include <linux/elf.h> #include <asm/uaccess.h> #include <asm/page.h> #include <asm/pgtable.h> #include <asm/system.h> +#include "ppc32.h" + /* * does not yet catch signals sent when the child dies. * in exit.c or in signal.c. @@ -64,6 +67,27 @@ static long compat_ptrace_old(struct task_struct *child, long request, return -EPERM; } +static int compat_ptrace_getsiginfo(struct task_struct *child, compat_siginfo_t __user *data) +{ + siginfo_t lastinfo; + int error = -ESRCH; + + read_lock(&tasklist_lock); + if (likely(child->sighand != NULL)) { + error = -EINVAL; + spin_lock_irq(&child->sighand->siglock); + if (likely(child->last_siginfo != NULL)) { + lastinfo = *child->last_siginfo; + error = 0; + } + spin_unlock_irq(&child->sighand->siglock); + } + read_unlock(&tasklist_lock); + if (!error) + return copy_siginfo_to_user32(data, &lastinfo); + return error; +} + long compat_arch_ptrace(struct task_struct *child, compat_long_t request, compat_ulong_t caddr, compat_ulong_t cdata) { @@ -282,6 +306,9 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, 0, PT_REGS_COUNT * sizeof(compat_long_t), compat_ptr(data)); + case PTRACE_GETSIGINFO: + return compat_ptrace_getsiginfo(child, compat_ptr(data)); + case PTRACE_GETFPREGS: case PTRACE_SETFPREGS: case PTRACE_GETVRREGS: diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 52e95c2158c..34843c31841 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -22,11 +22,11 @@ #include <linux/smp.h> #include <linux/completion.h> #include <linux/cpumask.h> +#include <linux/lmb.h> #include <asm/prom.h> #include <asm/rtas.h> #include <asm/hvcall.h> -#include <asm/semaphore.h> #include <asm/machdep.h> #include <asm/firmware.h> #include <asm/page.h> @@ -34,7 +34,6 @@ #include <asm/system.h> #include <asm/delay.h> #include <asm/uaccess.h> -#include <asm/lmb.h> #include <asm/udbg.h> #include <asm/syscalls.h> #include <asm/smp.h> @@ -507,7 +506,7 @@ int rtas_error_rc(int rtas_rc) break; default: printk(KERN_ERR "%s: unexpected RTAS error %d\n", - __FUNCTION__, rtas_rc); + __func__, rtas_rc); rc = -ERANGE; break; } diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 538baf46f15..627f126d184 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -807,7 +807,7 @@ int __init rtas_flash_init(void) rtas_block_ctor); if (!flash_block_cache) { printk(KERN_ERR "%s: failed to create block cache\n", - __FUNCTION__); + __func__); rc = -ENOMEM; goto cleanup; } diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 433a0a0949f..3ab88a9dc70 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -56,21 +56,6 @@ static inline int config_access_valid(struct pci_dn *dn, int where) return 0; } -static int of_device_available(struct device_node * dn) -{ - const char *status; - - status = of_get_property(dn, "status", NULL); - - if (!status) - return 1; - - if (!strcmp(status, "okay")) - return 1; - - return 0; -} - int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val) { int returnval = -1; @@ -117,7 +102,7 @@ static int rtas_pci_read_config(struct pci_bus *bus, for (dn = busdn->child; dn; dn = dn->sibling) { struct pci_dn *pdn = PCI_DN(dn); if (pdn && pdn->devfn == devfn - && of_device_available(dn)) + && of_device_is_available(dn)) return rtas_read_config(pdn, where, size, val); } @@ -164,7 +149,7 @@ static int rtas_pci_write_config(struct pci_bus *bus, for (dn = busdn->child; dn; dn = dn->sibling) { struct pci_dn *pdn = PCI_DN(dn); if (pdn && pdn->devfn == devfn - && of_device_available(dn)) + && of_device_is_available(dn)) return rtas_write_config(pdn, where, size, val); } return PCIBIOS_DEVICE_NOT_FOUND; @@ -326,7 +311,7 @@ int pcibios_remove_root_bus(struct pci_controller *phb) res = b->resource[0]; if (!res->flags) { - printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__, + printk(KERN_ERR "%s: no IO resource for PHB %s\n", __func__, b->name); return 1; } @@ -334,13 +319,13 @@ int pcibios_remove_root_bus(struct pci_controller *phb) rc = pcibios_unmap_io_space(b); if (rc) { printk(KERN_ERR "%s: failed to unmap IO on bus %s\n", - __FUNCTION__, b->name); + __func__, b->name); return 1; } if (release_resource(res)) { printk(KERN_ERR "%s: failed to release IO on bus %s\n", - __FUNCTION__, b->name); + __func__, b->name); return 1; } @@ -348,13 +333,13 @@ int pcibios_remove_root_bus(struct pci_controller *phb) res = b->resource[i]; if (!res->flags && i == 0) { printk(KERN_ERR "%s: no MEM resource for PHB %s\n", - __FUNCTION__, b->name); + __func__, b->name); return 1; } if (res->flags && release_resource(res)) { printk(KERN_ERR "%s: failed to release IO %d on bus %s\n", - __FUNCTION__, i, b->name); + __func__, i, b->name); return 1; } } diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 6adb5a1e98b..db540eab09f 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -34,6 +34,7 @@ #include <linux/serial_8250.h> #include <linux/debugfs.h> #include <linux/percpu.h> +#include <linux/lmb.h> #include <asm/io.h> #include <asm/prom.h> #include <asm/processor.h> @@ -56,7 +57,6 @@ #include <asm/cache.h> #include <asm/page.h> #include <asm/mmu.h> -#include <asm/lmb.h> #include <asm/xmon.h> #include <asm/cputhreads.h> @@ -167,6 +167,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) unsigned short min; if (cpu_id == NR_CPUS) { + struct device_node *root; + const char *model = NULL; #if defined(CONFIG_SMP) && defined(CONFIG_PPC32) unsigned long bogosum = 0; int i; @@ -178,6 +180,13 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq); if (ppc_md.name) seq_printf(m, "platform\t: %s\n", ppc_md.name); + root = of_find_node_by_path("/"); + if (root) + model = of_get_property(root, "model", NULL); + if (model) + seq_printf(m, "model\t\t: %s\n", model); + of_node_put(root); + if (ppc_md.show_cpuinfo != NULL) ppc_md.show_cpuinfo(m); diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 06d918d94dd..36f6779c88d 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -164,6 +164,18 @@ int __init ppc_setup_l2cr(char *str) } __setup("l2cr=", ppc_setup_l2cr); +/* Checks "l3cr=xxxx" command-line option */ +int __init ppc_setup_l3cr(char *str) +{ + if (cpu_has_feature(CPU_FTR_L3CR)) { + unsigned long val = simple_strtoul(str, NULL, 0); + printk(KERN_INFO "l3cr set to %lx\n", val); + _set_L3CR(val); /* and enable it */ + } + return 1; +} +__setup("l3cr=", ppc_setup_l3cr); + #ifdef CONFIG_GENERIC_NVRAM /* Generic nvram hooks used by drivers/char/gen_nvram.c */ @@ -269,7 +281,7 @@ void __init setup_arch(char **cmdline_p) if (ppc_md.panic) setup_panic(); - init_mm.start_code = PAGE_OFFSET; + init_mm.start_code = (unsigned long)_stext; init_mm.end_code = (unsigned long) _etext; init_mm.end_data = (unsigned long) _edata; init_mm.brk = klimit; diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 3b1529c103e..31ada9fdfc5 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -33,6 +33,8 @@ #include <linux/serial_8250.h> #include <linux/bootmem.h> #include <linux/pci.h> +#include <linux/lockdep.h> +#include <linux/lmb.h> #include <asm/io.h> #include <asm/kdump.h> #include <asm/prom.h> @@ -55,7 +57,6 @@ #include <asm/cache.h> #include <asm/page.h> #include <asm/mmu.h> -#include <asm/lmb.h> #include <asm/firmware.h> #include <asm/xmon.h> #include <asm/udbg.h> @@ -178,6 +179,9 @@ void __init early_setup(unsigned long dt_ptr) /* Enable early debugging if any specified (see udbg.h) */ udbg_early_init(); + /* Initialize lockdep early or else spinlocks will blow */ + lockdep_init(); + DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr); /* @@ -510,7 +514,7 @@ void __init setup_arch(char **cmdline_p) if (ppc_md.panic) setup_panic(); - init_mm.start_code = PAGE_OFFSET; + init_mm.start_code = (unsigned long)_stext; init_mm.end_code = (unsigned long) _etext; init_mm.end_data = (unsigned long) _edata; init_mm.brk = klimit; diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index d840bc772fd..ad6943468ee 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -621,6 +621,18 @@ int copy_siginfo_to_user32(struct compat_siginfo __user *d, siginfo_t *s) #define copy_siginfo_to_user copy_siginfo_to_user32 +int copy_siginfo_from_user32(siginfo_t *to, struct compat_siginfo __user *from) +{ + memset(to, 0, sizeof *to); + + if (copy_from_user(to, from, 3*sizeof(int)) || + copy_from_user(to->_sifields._pad, + from->_sifields._pad, SI_PAD_SIZE32)) + return -EFAULT; + + return 0; +} + /* * Note: it is necessary to treat pid and sig as unsigned ints, with the * corresponding cast to a signed int to insure that the proper conversion @@ -634,9 +646,10 @@ long compat_sys_rt_sigqueueinfo(u32 pid, u32 sig, compat_siginfo_t __user *uinfo int ret; mm_segment_t old_fs = get_fs(); - if (copy_from_user (&info, uinfo, 3*sizeof(int)) || - copy_from_user (info._sifields._pad, uinfo->_sifields._pad, SI_PAD_SIZE32)) - return -EFAULT; + ret = copy_siginfo_from_user32(&info, uinfo); + if (unlikely(ret)) + return ret; + set_fs (KERNEL_DS); /* The __user pointer cast is valid becasuse of the set_fs() */ ret = sys_rt_sigqueueinfo((int)pid, (int)sig, (siginfo_t __user *) &info); diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c new file mode 100644 index 00000000000..e3638eeaaae --- /dev/null +++ b/arch/powerpc/kernel/stacktrace.c @@ -0,0 +1,47 @@ +/* + * Stack trace utility + * + * Copyright 2008 Christoph Hellwig, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/sched.h> +#include <linux/stacktrace.h> +#include <asm/ptrace.h> +#include <asm/asm-offsets.h> + +/* + * Save stack-backtrace addresses into a stack_trace buffer. + */ +void save_stack_trace(struct stack_trace *trace) +{ + unsigned long sp; + + asm("mr %0,1" : "=r" (sp)); + + for (;;) { + unsigned long *stack = (unsigned long *) sp; + unsigned long newsp, ip; + + if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD)) + return; + + newsp = stack[0]; + ip = stack[STACK_FRAME_LR_SAVE]; + + if (!trace->skip) + trace->entries[trace->nr_entries++] = ip; + else + trace->skip--; + + if (trace->nr_entries >= trace->max_entries) + return; + + sp = newsp; + } +} diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index 4a4f5c6b560..709f8cb8bfc 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -47,7 +47,6 @@ #include <asm/types.h> #include <asm/uaccess.h> #include <asm/unistd.h> -#include <asm/semaphore.h> #include <asm/time.h> #include <asm/mmu_context.h> #include <asm/ppc-pci.h> @@ -368,11 +367,6 @@ long compat_sys_execve(unsigned long a0, unsigned long a1, unsigned long a2, error = compat_do_execve(filename, compat_ptr(a1), compat_ptr(a2), regs); - if (error == 0) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; - task_unlock(current); - } putname(filename); out: diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index 3b1d5dd6564..e722a4eeb5d 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -38,7 +38,6 @@ #include <linux/personality.h> #include <asm/uaccess.h> -#include <asm/semaphore.h> #include <asm/syscalls.h> #include <asm/time.h> #include <asm/unistd.h> diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index d3437c4c4a6..c21a626af67 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -21,13 +21,14 @@ #include <linux/elf.h> #include <linux/security.h> #include <linux/bootmem.h> +#include <linux/lmb.h> #include <asm/pgtable.h> #include <asm/system.h> #include <asm/processor.h> #include <asm/mmu.h> #include <asm/mmu_context.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/machdep.h> #include <asm/cputable.h> #include <asm/sections.h> diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index f98867252ee..b77f8af7ddd 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -139,7 +139,7 @@ static int vio_bus_remove(struct device *dev) */ int vio_register_driver(struct vio_driver *viodrv) { - printk(KERN_DEBUG "%s: driver %s registering\n", __FUNCTION__, + printk(KERN_DEBUG "%s: driver %s registering\n", __func__, viodrv->driver.name); /* fill in 'struct driver' fields */ @@ -184,7 +184,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node) /* we need the 'device_type' property, in order to match with drivers */ if (of_node->type == NULL) { printk(KERN_WARNING "%s: node %s missing 'device_type'\n", - __FUNCTION__, + __func__, of_node->name ? of_node->name : "<unknown>"); return NULL; } @@ -192,7 +192,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node) unit_address = of_get_property(of_node, "reg", NULL); if (unit_address == NULL) { printk(KERN_WARNING "%s: node %s missing 'reg'\n", - __FUNCTION__, + __func__, of_node->name ? of_node->name : "<unknown>"); return NULL; } @@ -227,7 +227,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node) /* register with generic device framework */ if (device_register(&viodev->dev)) { printk(KERN_ERR "%s: failed to register device %s\n", - __FUNCTION__, viodev->dev.bus_id); + __func__, viodev->dev.bus_id); /* XXX free TCE table */ kfree(viodev); return NULL; @@ -258,7 +258,7 @@ static int __init vio_bus_init(void) err = device_register(&vio_bus_device.dev); if (err) { printk(KERN_WARNING "%s: device_register returned %i\n", - __FUNCTION__, err); + __func__, err); return err; } diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 0afb9e31d2a..0c3000bf8d7 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -1,11 +1,9 @@ #ifdef CONFIG_PPC64 -#include <asm/page.h> #define PROVIDE32(x) PROVIDE(__unused__##x) #else -#define PAGE_SIZE 4096 -#define KERNELBASE CONFIG_KERNEL_START #define PROVIDE32(x) PROVIDE(x) #endif +#include <asm/page.h> #include <asm-generic/vmlinux.lds.h> #include <asm/cache.h> @@ -33,7 +31,7 @@ SECTIONS */ /* Text and gots */ - .text : { + .text : AT(ADDR(.text) - LOAD_OFFSET) { ALIGN_FUNCTION(); *(.text.head) _text = .; @@ -58,7 +56,7 @@ SECTIONS RODATA /* Exception & bug tables */ - __ex_table : { + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { __start___ex_table = .; *(__ex_table) __stop___ex_table = .; @@ -74,7 +72,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_begin = .; - .init.text : { + .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { _sinittext = .; INIT_TEXT _einittext = .; @@ -83,11 +81,11 @@ SECTIONS /* .exit.text is discarded at runtime, not link time, * to deal with references from __bug_table */ - .exit.text : { + .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { EXIT_TEXT } - .init.data : { + .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { INIT_DATA __vtop_table_begin = .; *(.vtop_fixup); @@ -103,19 +101,19 @@ SECTIONS } . = ALIGN(16); - .init.setup : { + .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { __setup_start = .; *(.init.setup) __setup_end = .; } - .initcall.init : { + .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { __initcall_start = .; INITCALLS __initcall_end = .; } - .con_initcall.init : { + .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { __con_initcall_start = .; *(.con_initcall.init) __con_initcall_end = .; @@ -124,14 +122,14 @@ SECTIONS SECURITY_INIT . = ALIGN(8); - __ftr_fixup : { + __ftr_fixup : AT(ADDR(__ftr_fixup) - LOAD_OFFSET) { __start___ftr_fixup = .; *(__ftr_fixup) __stop___ftr_fixup = .; } #ifdef CONFIG_PPC64 . = ALIGN(8); - __fw_ftr_fixup : { + __fw_ftr_fixup : AT(ADDR(__fw_ftr_fixup) - LOAD_OFFSET) { __start___fw_ftr_fixup = .; *(__fw_ftr_fixup) __stop___fw_ftr_fixup = .; @@ -139,14 +137,14 @@ SECTIONS #endif #ifdef CONFIG_BLK_DEV_INITRD . = ALIGN(PAGE_SIZE); - .init.ramfs : { + .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { __initramfs_start = .; *(.init.ramfs) __initramfs_end = .; } #endif . = ALIGN(PAGE_SIZE); - .data.percpu : { + .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { __per_cpu_start = .; *(.data.percpu) *(.data.percpu.shared_aligned) @@ -154,7 +152,7 @@ SECTIONS } . = ALIGN(8); - .machine.desc : { + .machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) { __machine_desc_start = . ; *(.machine.desc) __machine_desc_end = . ; @@ -172,25 +170,24 @@ SECTIONS _sdata = .; #ifdef CONFIG_PPC32 - .data : - { + .data : AT(ADDR(.data) - LOAD_OFFSET) { DATA_DATA *(.sdata) *(.got.plt) *(.got) } #else - .data : { + .data : AT(ADDR(.data) - LOAD_OFFSET) { DATA_DATA *(.data.rel*) *(.toc1) *(.branch_lt) } - .opd : { + .opd : AT(ADDR(.opd) - LOAD_OFFSET) { *(.opd) } - .got : { + .got : AT(ADDR(.got) - LOAD_OFFSET) { __toc_start = .; *(.got) *(.toc) @@ -207,26 +204,26 @@ SECTIONS #else . = ALIGN(16384); #endif - .data.init_task : { + .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { *(.data.init_task) } . = ALIGN(PAGE_SIZE); - .data.page_aligned : { + .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { *(.data.page_aligned) } - .data.cacheline_aligned : { + .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { *(.data.cacheline_aligned) } . = ALIGN(L1_CACHE_BYTES); - .data.read_mostly : { + .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { *(.data.read_mostly) } . = ALIGN(PAGE_SIZE); - __data_nosave : { + .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { __nosave_begin = .; *(.data.nosave) . = ALIGN(PAGE_SIZE); @@ -237,7 +234,7 @@ SECTIONS * And finally the bss */ - .bss : { + .bss : AT(ADDR(.bss) - LOAD_OFFSET) { __bss_start = .; *(.sbss) *(.scommon) *(.dynbss) diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c index 22c3b4f53de..29b2941cada 100644 --- a/arch/powerpc/lib/rheap.c +++ b/arch/powerpc/lib/rheap.c @@ -54,7 +54,7 @@ static int grow(rh_info_t * info, int max_blocks) new_blocks = max_blocks - info->max_blocks; - block = kmalloc(sizeof(rh_block_t) * max_blocks, GFP_KERNEL); + block = kmalloc(sizeof(rh_block_t) * max_blocks, GFP_ATOMIC); if (block == NULL) return -ENOMEM; @@ -258,7 +258,7 @@ rh_info_t *rh_create(unsigned int alignment) if ((alignment & (alignment - 1)) != 0) return ERR_PTR(-EINVAL); - info = kmalloc(sizeof(*info), GFP_KERNEL); + info = kmalloc(sizeof(*info), GFP_ATOMIC); if (info == NULL) return ERR_PTR(-ENOMEM); diff --git a/arch/powerpc/lib/string.S b/arch/powerpc/lib/string.S index c4c622d8e6a..49eb1f1a2bb 100644 --- a/arch/powerpc/lib/string.S +++ b/arch/powerpc/lib/string.S @@ -75,6 +75,20 @@ _GLOBAL(strcmp) beq 1b blr +_GLOBAL(strncmp) + PPC_LCMPI r5,0 + beqlr + mtctr r5 + addi r5,r3,-1 + addi r4,r4,-1 +1: lbzu r3,1(r5) + cmpwi 1,r3,0 + lbzu r0,1(r4) + subf. r3,r0,r3 + beqlr 1 + bdnzt eq,1b + blr + _GLOBAL(strlen) addi r4,r3,-1 1: lbzu r0,1(r4) diff --git a/arch/powerpc/math-emu/fabs.c b/arch/powerpc/math-emu/fabs.c index 41f0617f3d3..549baba5948 100644 --- a/arch/powerpc/math-emu/fabs.c +++ b/arch/powerpc/math-emu/fabs.c @@ -9,7 +9,7 @@ fabs(u32 *frD, u32 *frB) frD[1] = frB[1]; #ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); + printk("%s: D %p, B %p: ", __func__, frD, frB); dump_double(frD); printk("\n"); #endif diff --git a/arch/powerpc/math-emu/fadd.c b/arch/powerpc/math-emu/fadd.c index fc8836488b6..7befbbf2c33 100644 --- a/arch/powerpc/math-emu/fadd.c +++ b/arch/powerpc/math-emu/fadd.c @@ -14,7 +14,7 @@ fadd(void *frD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); + printk("%s: %p %p %p\n", __func__, frD, frA, frB); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fadds.c b/arch/powerpc/math-emu/fadds.c index 93025b6c8f3..2b346b38b48 100644 --- a/arch/powerpc/math-emu/fadds.c +++ b/arch/powerpc/math-emu/fadds.c @@ -15,7 +15,7 @@ fadds(void *frD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); + printk("%s: %p %p %p\n", __func__, frD, frA, frB); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fcmpo.c b/arch/powerpc/math-emu/fcmpo.c index 4efac394b4c..36d689044c6 100644 --- a/arch/powerpc/math-emu/fcmpo.c +++ b/arch/powerpc/math-emu/fcmpo.c @@ -15,7 +15,7 @@ fcmpo(u32 *ccr, int crfD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB); + printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fcmpu.c b/arch/powerpc/math-emu/fcmpu.c index b7e33176e61..53d93894f2a 100644 --- a/arch/powerpc/math-emu/fcmpu.c +++ b/arch/powerpc/math-emu/fcmpu.c @@ -14,7 +14,7 @@ fcmpu(u32 *ccr, int crfD, void *frA, void *frB) long cmp; #ifdef DEBUG - printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB); + printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fctiw.c b/arch/powerpc/math-emu/fctiw.c index 3b3c98b840c..fcd7a95e021 100644 --- a/arch/powerpc/math-emu/fctiw.c +++ b/arch/powerpc/math-emu/fctiw.c @@ -16,7 +16,7 @@ fctiw(u32 *frD, void *frB) frD[1] = r; #ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); + printk("%s: D %p, B %p: ", __func__, frD, frB); dump_double(frD); printk("\n"); #endif diff --git a/arch/powerpc/math-emu/fctiwz.c b/arch/powerpc/math-emu/fctiwz.c index 7717eb6fcfb..1514d59e146 100644 --- a/arch/powerpc/math-emu/fctiwz.c +++ b/arch/powerpc/math-emu/fctiwz.c @@ -23,7 +23,7 @@ fctiwz(u32 *frD, void *frB) __FPU_FPSCR = fpscr; #ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); + printk("%s: D %p, B %p: ", __func__, frD, frB); dump_double(frD); printk("\n"); #endif diff --git a/arch/powerpc/math-emu/fdiv.c b/arch/powerpc/math-emu/fdiv.c index f2fba825b2d..18a20fe396b 100644 --- a/arch/powerpc/math-emu/fdiv.c +++ b/arch/powerpc/math-emu/fdiv.c @@ -14,7 +14,7 @@ fdiv(void *frD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); + printk("%s: %p %p %p\n", __func__, frD, frA, frB); #endif __FP_UNPACK_D(A, frA); @@ -28,13 +28,13 @@ fdiv(void *frD, void *frA, void *frB) if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) { ret |= EFLAG_VXZDZ; #ifdef DEBUG - printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__); + printk("%s: FPSCR_VXZDZ raised\n", __func__); #endif } if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) { ret |= EFLAG_VXIDI; #ifdef DEBUG - printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__); + printk("%s: FPSCR_VXIDI raised\n", __func__); #endif } diff --git a/arch/powerpc/math-emu/fdivs.c b/arch/powerpc/math-emu/fdivs.c index b971196e317..24feed689c3 100644 --- a/arch/powerpc/math-emu/fdivs.c +++ b/arch/powerpc/math-emu/fdivs.c @@ -15,7 +15,7 @@ fdivs(void *frD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); + printk("%s: %p %p %p\n", __func__, frD, frA, frB); #endif __FP_UNPACK_D(A, frA); @@ -29,13 +29,13 @@ fdivs(void *frD, void *frA, void *frB) if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) { ret |= EFLAG_VXZDZ; #ifdef DEBUG - printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__); + printk("%s: FPSCR_VXZDZ raised\n", __func__); #endif } if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) { ret |= EFLAG_VXIDI; #ifdef DEBUG - printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__); + printk("%s: FPSCR_VXIDI raised\n", __func__); #endif } diff --git a/arch/powerpc/math-emu/fmadd.c b/arch/powerpc/math-emu/fmadd.c index 0a1dbce793e..dedb465fdc6 100644 --- a/arch/powerpc/math-emu/fmadd.c +++ b/arch/powerpc/math-emu/fmadd.c @@ -16,7 +16,7 @@ fmadd(void *frD, void *frA, void *frB, void *frC) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fmadds.c b/arch/powerpc/math-emu/fmadds.c index 0f70bba9445..6bbb56d5502 100644 --- a/arch/powerpc/math-emu/fmadds.c +++ b/arch/powerpc/math-emu/fmadds.c @@ -17,7 +17,7 @@ fmadds(void *frD, void *frA, void *frB, void *frC) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fmr.c b/arch/powerpc/math-emu/fmr.c index 28df700c0c7..bd55384b819 100644 --- a/arch/powerpc/math-emu/fmr.c +++ b/arch/powerpc/math-emu/fmr.c @@ -9,7 +9,7 @@ fmr(u32 *frD, u32 *frB) frD[1] = frB[1]; #ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); + printk("%s: D %p, B %p: ", __func__, frD, frB); dump_double(frD); printk("\n"); #endif diff --git a/arch/powerpc/math-emu/fmsub.c b/arch/powerpc/math-emu/fmsub.c index 203fd48a6fe..f311e2c7e67 100644 --- a/arch/powerpc/math-emu/fmsub.c +++ b/arch/powerpc/math-emu/fmsub.c @@ -16,7 +16,7 @@ fmsub(void *frD, void *frA, void *frB, void *frC) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fmsubs.c b/arch/powerpc/math-emu/fmsubs.c index 8ce68624c18..81a716d3ee2 100644 --- a/arch/powerpc/math-emu/fmsubs.c +++ b/arch/powerpc/math-emu/fmsubs.c @@ -17,7 +17,7 @@ fmsubs(void *frD, void *frA, void *frB, void *frC) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fmul.c b/arch/powerpc/math-emu/fmul.c index 66c7e79aae2..2f3d32784a0 100644 --- a/arch/powerpc/math-emu/fmul.c +++ b/arch/powerpc/math-emu/fmul.c @@ -14,7 +14,7 @@ fmul(void *frD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); + printk("%s: %p %p %p\n", __func__, frD, frA, frB); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fmuls.c b/arch/powerpc/math-emu/fmuls.c index 26bc4278271..962b5883f78 100644 --- a/arch/powerpc/math-emu/fmuls.c +++ b/arch/powerpc/math-emu/fmuls.c @@ -15,7 +15,7 @@ fmuls(void *frD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); + printk("%s: %p %p %p\n", __func__, frD, frA, frB); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fnabs.c b/arch/powerpc/math-emu/fnabs.c index c6b913d179e..a7d34f3d949 100644 --- a/arch/powerpc/math-emu/fnabs.c +++ b/arch/powerpc/math-emu/fnabs.c @@ -9,7 +9,7 @@ fnabs(u32 *frD, u32 *frB) frD[1] = frB[1]; #ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); + printk("%s: D %p, B %p: ", __func__, frD, frB); dump_double(frD); printk("\n"); #endif diff --git a/arch/powerpc/math-emu/fneg.c b/arch/powerpc/math-emu/fneg.c index fe9a98deff6..1e988cd9c6c 100644 --- a/arch/powerpc/math-emu/fneg.c +++ b/arch/powerpc/math-emu/fneg.c @@ -9,7 +9,7 @@ fneg(u32 *frD, u32 *frB) frD[1] = frB[1]; #ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); + printk("%s: D %p, B %p: ", __func__, frD, frB); dump_double(frD); printk("\n"); #endif diff --git a/arch/powerpc/math-emu/fnmadd.c b/arch/powerpc/math-emu/fnmadd.c index 7f312276d92..8cf7827c4fb 100644 --- a/arch/powerpc/math-emu/fnmadd.c +++ b/arch/powerpc/math-emu/fnmadd.c @@ -16,7 +16,7 @@ fnmadd(void *frD, void *frA, void *frB, void *frC) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fnmadds.c b/arch/powerpc/math-emu/fnmadds.c index 65454c9c70b..f1c4f0f0d80 100644 --- a/arch/powerpc/math-emu/fnmadds.c +++ b/arch/powerpc/math-emu/fnmadds.c @@ -17,7 +17,7 @@ fnmadds(void *frD, void *frA, void *frB, void *frC) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fnmsub.c b/arch/powerpc/math-emu/fnmsub.c index f1ca7482b5f..98944e6e260 100644 --- a/arch/powerpc/math-emu/fnmsub.c +++ b/arch/powerpc/math-emu/fnmsub.c @@ -16,7 +16,7 @@ fnmsub(void *frD, void *frA, void *frB, void *frC) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fnmsubs.c b/arch/powerpc/math-emu/fnmsubs.c index 5c9a09a87dc..b20f4eb63fb 100644 --- a/arch/powerpc/math-emu/fnmsubs.c +++ b/arch/powerpc/math-emu/fnmsubs.c @@ -17,7 +17,7 @@ fnmsubs(void *frD, void *frA, void *frB, void *frC) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fres.c b/arch/powerpc/math-emu/fres.c index ec11e46d20a..10ecbd08b79 100644 --- a/arch/powerpc/math-emu/fres.c +++ b/arch/powerpc/math-emu/fres.c @@ -6,7 +6,7 @@ int fres(void *frD, void *frB) { #ifdef DEBUG - printk("%s: %p %p\n", __FUNCTION__, frD, frB); + printk("%s: %p %p\n", __func__, frD, frB); #endif return -ENOSYS; } diff --git a/arch/powerpc/math-emu/frsp.c b/arch/powerpc/math-emu/frsp.c index d879b2a3d0c..724ccbc0468 100644 --- a/arch/powerpc/math-emu/frsp.c +++ b/arch/powerpc/math-emu/frsp.c @@ -12,7 +12,7 @@ frsp(void *frD, void *frB) FP_DECL_D(B); #ifdef DEBUG - printk("%s: D %p, B %p\n", __FUNCTION__, frD, frB); + printk("%s: D %p, B %p\n", __func__, frD, frB); #endif __FP_UNPACK_D(B, frB); diff --git a/arch/powerpc/math-emu/frsqrte.c b/arch/powerpc/math-emu/frsqrte.c index a11ae182985..1d0a3a0fd0e 100644 --- a/arch/powerpc/math-emu/frsqrte.c +++ b/arch/powerpc/math-emu/frsqrte.c @@ -6,7 +6,7 @@ int frsqrte(void *frD, void *frB) { #ifdef DEBUG - printk("%s: %p %p\n", __FUNCTION__, frD, frB); + printk("%s: %p %p\n", __func__, frD, frB); #endif return 0; } diff --git a/arch/powerpc/math-emu/fsel.c b/arch/powerpc/math-emu/fsel.c index e36e6e72819..ecb5f28eb1f 100644 --- a/arch/powerpc/math-emu/fsel.c +++ b/arch/powerpc/math-emu/fsel.c @@ -11,7 +11,7 @@ fsel(u32 *frD, void *frA, u32 *frB, u32 *frC) FP_DECL_D(A); #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); + printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fsqrt.c b/arch/powerpc/math-emu/fsqrt.c index 6f8319f64a8..38ec2b752e9 100644 --- a/arch/powerpc/math-emu/fsqrt.c +++ b/arch/powerpc/math-emu/fsqrt.c @@ -13,7 +13,7 @@ fsqrt(void *frD, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB); + printk("%s: %p %p %p %p\n", __func__, frD, frB); #endif __FP_UNPACK_D(B, frB); diff --git a/arch/powerpc/math-emu/fsqrts.c b/arch/powerpc/math-emu/fsqrts.c index 3b2b1cf55c1..335263e06ee 100644 --- a/arch/powerpc/math-emu/fsqrts.c +++ b/arch/powerpc/math-emu/fsqrts.c @@ -14,7 +14,7 @@ fsqrts(void *frD, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB); + printk("%s: %p %p %p %p\n", __func__, frD, frB); #endif __FP_UNPACK_D(B, frB); diff --git a/arch/powerpc/math-emu/fsub.c b/arch/powerpc/math-emu/fsub.c index 956679042bb..208d20fc52a 100644 --- a/arch/powerpc/math-emu/fsub.c +++ b/arch/powerpc/math-emu/fsub.c @@ -14,7 +14,7 @@ fsub(void *frD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); + printk("%s: %p %p %p\n", __func__, frD, frA, frB); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/fsubs.c b/arch/powerpc/math-emu/fsubs.c index 3428117dfe8..0e61b808c44 100644 --- a/arch/powerpc/math-emu/fsubs.c +++ b/arch/powerpc/math-emu/fsubs.c @@ -15,7 +15,7 @@ fsubs(void *frD, void *frA, void *frB) int ret = 0; #ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); + printk("%s: %p %p %p\n", __func__, frD, frA, frB); #endif __FP_UNPACK_D(A, frA); diff --git a/arch/powerpc/math-emu/lfd.c b/arch/powerpc/math-emu/lfd.c index 7d38101c329..6ec90b57c61 100644 --- a/arch/powerpc/math-emu/lfd.c +++ b/arch/powerpc/math-emu/lfd.c @@ -11,7 +11,7 @@ lfd(void *frD, void *ea) if (copy_from_user(frD, ea, sizeof(double))) return -EFAULT; #ifdef DEBUG - printk("%s: D %p, ea %p: ", __FUNCTION__, frD, ea); + printk("%s: D %p, ea %p: ", __func__, frD, ea); dump_double(frD); printk("\n"); #endif diff --git a/arch/powerpc/math-emu/lfs.c b/arch/powerpc/math-emu/lfs.c index c86dee3d765..6f18ebe3a7f 100644 --- a/arch/powerpc/math-emu/lfs.c +++ b/arch/powerpc/math-emu/lfs.c @@ -14,7 +14,7 @@ lfs(void *frD, void *ea) float f; #ifdef DEBUG - printk("%s: D %p, ea %p\n", __FUNCTION__, frD, ea); + printk("%s: D %p, ea %p\n", __func__, frD, ea); #endif if (copy_from_user(&f, ea, sizeof(float))) diff --git a/arch/powerpc/math-emu/mcrfs.c b/arch/powerpc/math-emu/mcrfs.c index 106dd912914..41ba247faf8 100644 --- a/arch/powerpc/math-emu/mcrfs.c +++ b/arch/powerpc/math-emu/mcrfs.c @@ -10,7 +10,7 @@ mcrfs(u32 *ccr, u32 crfD, u32 crfS) u32 value, clear; #ifdef DEBUG - printk("%s: %p (%08x) %d %d\n", __FUNCTION__, ccr, *ccr, crfD, crfS); + printk("%s: %p (%08x) %d %d\n", __func__, ccr, *ccr, crfD, crfS); #endif clear = 15 << ((7 - crfS) << 2); @@ -24,7 +24,7 @@ mcrfs(u32 *ccr, u32 crfD, u32 crfS) *ccr |= (value << ((7 - crfD) << 2)); #ifdef DEBUG - printk("CR: %08x\n", __FUNCTION__, *ccr); + printk("CR: %08x\n", __func__, *ccr); #endif return 0; diff --git a/arch/powerpc/math-emu/mffs.c b/arch/powerpc/math-emu/mffs.c index f477c9170e7..b0e2106e6eb 100644 --- a/arch/powerpc/math-emu/mffs.c +++ b/arch/powerpc/math-emu/mffs.c @@ -10,7 +10,7 @@ mffs(u32 *frD) frD[1] = __FPU_FPSCR; #ifdef DEBUG - printk("%s: frD %p: %08x.%08x\n", __FUNCTION__, frD, frD[0], frD[1]); + printk("%s: frD %p: %08x.%08x\n", __func__, frD, frD[0], frD[1]); #endif return 0; diff --git a/arch/powerpc/math-emu/mtfsb0.c b/arch/powerpc/math-emu/mtfsb0.c index 99bfd80f4af..d3062350ea2 100644 --- a/arch/powerpc/math-emu/mtfsb0.c +++ b/arch/powerpc/math-emu/mtfsb0.c @@ -11,7 +11,7 @@ mtfsb0(int crbD) __FPU_FPSCR &= ~(1 << (31 - crbD)); #ifdef DEBUG - printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR); + printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR); #endif return 0; diff --git a/arch/powerpc/math-emu/mtfsb1.c b/arch/powerpc/math-emu/mtfsb1.c index 3d9e7ed92d2..2e948704b56 100644 --- a/arch/powerpc/math-emu/mtfsb1.c +++ b/arch/powerpc/math-emu/mtfsb1.c @@ -11,7 +11,7 @@ mtfsb1(int crbD) __FPU_FPSCR |= (1 << (31 - crbD)); #ifdef DEBUG - printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR); + printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR); #endif return 0; diff --git a/arch/powerpc/math-emu/mtfsf.c b/arch/powerpc/math-emu/mtfsf.c index d70cf714994..48014d8e3af 100644 --- a/arch/powerpc/math-emu/mtfsf.c +++ b/arch/powerpc/math-emu/mtfsf.c @@ -38,7 +38,7 @@ mtfsf(unsigned int FM, u32 *frB) __FPU_FPSCR |= (frB[1] & mask); #ifdef DEBUG - printk("%s: %02x %p: %08lx\n", __FUNCTION__, FM, frB, __FPU_FPSCR); + printk("%s: %02x %p: %08lx\n", __func__, FM, frB, __FPU_FPSCR); #endif return 0; diff --git a/arch/powerpc/math-emu/mtfsfi.c b/arch/powerpc/math-emu/mtfsfi.c index 71df854baa7..031e2009354 100644 --- a/arch/powerpc/math-emu/mtfsfi.c +++ b/arch/powerpc/math-emu/mtfsfi.c @@ -16,7 +16,7 @@ mtfsfi(unsigned int crfD, unsigned int IMM) __FPU_FPSCR |= (IMM & 0xf) << ((7 - crfD) << 2); #ifdef DEBUG - printk("%s: %d %x: %08lx\n", __FUNCTION__, crfD, IMM, __FPU_FPSCR); + printk("%s: %d %x: %08lx\n", __func__, crfD, IMM, __FPU_FPSCR); #endif return 0; diff --git a/arch/powerpc/math-emu/stfd.c b/arch/powerpc/math-emu/stfd.c index 3f8c2558a9e..33a165c8df0 100644 --- a/arch/powerpc/math-emu/stfd.c +++ b/arch/powerpc/math-emu/stfd.c @@ -7,7 +7,7 @@ stfd(void *frS, void *ea) { #if 0 #ifdef DEBUG - printk("%s: S %p, ea %p: ", __FUNCTION__, frS, ea); + printk("%s: S %p, ea %p: ", __func__, frS, ea); dump_double(frS); printk("\n"); #endif diff --git a/arch/powerpc/math-emu/stfiwx.c b/arch/powerpc/math-emu/stfiwx.c index 95caaeec6a0..f15a35f67e2 100644 --- a/arch/powerpc/math-emu/stfiwx.c +++ b/arch/powerpc/math-emu/stfiwx.c @@ -6,7 +6,7 @@ int stfiwx(u32 *frS, void *ea) { #ifdef DEBUG - printk("%s: %p %p\n", __FUNCTION__, frS, ea); + printk("%s: %p %p\n", __func__, frS, ea); #endif if (copy_to_user(ea, &frS[1], sizeof(frS[1]))) diff --git a/arch/powerpc/math-emu/stfs.c b/arch/powerpc/math-emu/stfs.c index e87ca23c6dc..8689aa48ef6 100644 --- a/arch/powerpc/math-emu/stfs.c +++ b/arch/powerpc/math-emu/stfs.c @@ -15,7 +15,7 @@ stfs(void *frS, void *ea) int err; #ifdef DEBUG - printk("%s: S %p, ea %p\n", __FUNCTION__, frS, ea); + printk("%s: S %p, ea %p\n", __func__, frS, ea); #endif __FP_UNPACK_D(A, frS); diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c index 3899ea97fbd..cecbbc76f62 100644 --- a/arch/powerpc/mm/40x_mmu.c +++ b/arch/powerpc/mm/40x_mmu.c @@ -97,7 +97,7 @@ unsigned long __init mmu_mapin_ram(void) phys_addr_t p; v = KERNELBASE; - p = PPC_MEMSTART; + p = 0; s = total_lowmem; if (__map_without_ltlbs) diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c index 04dc08798d3..953fb919eb0 100644 --- a/arch/powerpc/mm/44x_mmu.c +++ b/arch/powerpc/mm/44x_mmu.c @@ -67,7 +67,7 @@ unsigned long __init mmu_mapin_ram(void) /* Pin in enough TLBs to cover any lowmem not covered by the * initial 256M mapping established in head_44x.S */ - for (addr = PPC_PIN_SIZE; addr < total_lowmem; + for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr; addr += PPC_PIN_SIZE) ppc44x_pin_tlb(addr + PAGE_OFFSET, addr); diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 41649a5d360..1c00e0196f6 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -6,7 +6,7 @@ ifeq ($(CONFIG_PPC64),y) EXTRA_CFLAGS += -mno-minimal-toc endif -obj-y := fault.o mem.o lmb.o \ +obj-y := fault.o mem.o \ init_$(CONFIG_WORD_SIZE).o \ pgtable_$(CONFIG_WORD_SIZE).o \ mmu_context_$(CONFIG_WORD_SIZE).o diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index c93a966b7e4..ada249bf977 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -49,18 +49,15 @@ #include <asm/mmu.h> #include <asm/uaccess.h> #include <asm/smp.h> -#include <asm/bootx.h> #include <asm/machdep.h> #include <asm/setup.h> +#include "mmu_decl.h" + extern void loadcam_entry(unsigned int index); unsigned int tlbcam_index; unsigned int num_tlbcam_entries; static unsigned long __cam0, __cam1, __cam2; -extern unsigned long total_lowmem; -extern unsigned long __max_low_memory; -extern unsigned long __initial_memory_limit; -#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE #define NUM_TLBCAMS (16) @@ -165,15 +162,15 @@ void invalidate_tlbcam_entry(int index) void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1, unsigned long cam2) { - settlbcam(0, PAGE_OFFSET, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0); + settlbcam(0, PAGE_OFFSET, memstart_addr, cam0, _PAGE_KERNEL, 0); tlbcam_index++; if (cam1) { tlbcam_index++; - settlbcam(1, PAGE_OFFSET+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0); + settlbcam(1, PAGE_OFFSET+cam0, memstart_addr+cam0, cam1, _PAGE_KERNEL, 0); } if (cam2) { tlbcam_index++; - settlbcam(2, PAGE_OFFSET+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0); + settlbcam(2, PAGE_OFFSET+cam0+cam1, memstart_addr+cam0+cam1, cam2, _PAGE_KERNEL, 0); } } @@ -196,35 +193,32 @@ unsigned long __init mmu_mapin_ram(void) void __init adjust_total_lowmem(void) { - unsigned long max_low_mem = MAX_LOW_MEM; - unsigned long cam_max = 0x10000000; - unsigned long ram; + phys_addr_t max_lowmem_size = __max_low_memory; + phys_addr_t cam_max_size = 0x10000000; + phys_addr_t ram; - /* adjust CAM size to max_low_mem */ - if (max_low_mem < cam_max) - cam_max = max_low_mem; + /* adjust CAM size to max_lowmem_size */ + if (max_lowmem_size < cam_max_size) + cam_max_size = max_lowmem_size; - /* adjust lowmem size to max_low_mem */ - if (max_low_mem < total_lowmem) - ram = max_low_mem; - else - ram = total_lowmem; + /* adjust lowmem size to max_lowmem_size */ + ram = min(max_lowmem_size, total_lowmem); /* Calculate CAM values */ __cam0 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam0 > cam_max) - __cam0 = cam_max; + if (__cam0 > cam_max_size) + __cam0 = cam_max_size; ram -= __cam0; if (ram) { __cam1 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam1 > cam_max) - __cam1 = cam_max; + if (__cam1 > cam_max_size) + __cam1 = cam_max_size; ram -= __cam1; } if (ram) { __cam2 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam2 > cam_max) - __cam2 = cam_max; + if (__cam2 > cam_max_size) + __cam2 = cam_max_size; ram -= __cam2; } @@ -232,6 +226,6 @@ adjust_total_lowmem(void) " CAM2=%ldMb residual: %ldMb\n", __cam0 >> 20, __cam1 >> 20, __cam2 >> 20, (total_lowmem - __cam0 - __cam1 - __cam2) >> 20); - __max_low_memory = max_low_mem = __cam0 + __cam1 + __cam2; - __initial_memory_limit = __max_low_memory; + __max_low_memory = __cam0 + __cam1 + __cam2; + __initial_memory_limit_addr = memstart_addr + __max_low_memory; } diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index a83dfa3cf40..2b5a399f6fa 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -31,6 +31,7 @@ #include <linux/cache.h> #include <linux/init.h> #include <linux/signal.h> +#include <linux/lmb.h> #include <asm/processor.h> #include <asm/pgtable.h> @@ -41,7 +42,7 @@ #include <asm/system.h> #include <asm/uaccess.h> #include <asm/machdep.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/abs_addr.h> #include <asm/tlbflush.h> #include <asm/io.h> @@ -191,6 +192,29 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, return ret < 0 ? ret : 0; } +#ifdef CONFIG_MEMORY_HOTPLUG +static int htab_remove_mapping(unsigned long vstart, unsigned long vend, + int psize, int ssize) +{ + unsigned long vaddr; + unsigned int step, shift; + + shift = mmu_psize_defs[psize].shift; + step = 1 << shift; + + if (!ppc_md.hpte_removebolted) { + printk(KERN_WARNING "Platform doesn't implement " + "hpte_removebolted\n"); + return -EINVAL; + } + + for (vaddr = vstart; vaddr < vend; vaddr += step) + ppc_md.hpte_removebolted(vaddr, psize, ssize); + + return 0; +} +#endif /* CONFIG_MEMORY_HOTPLUG */ + static int __init htab_dt_scan_seg_sizes(unsigned long node, const char *uname, int depth, void *data) @@ -434,6 +458,12 @@ void create_section_mapping(unsigned long start, unsigned long end) _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX, mmu_linear_psize, mmu_kernel_ssize)); } + +int remove_section_mapping(unsigned long start, unsigned long end) +{ + return htab_remove_mapping(start, end, mmu_linear_psize, + mmu_kernel_ssize); +} #endif /* CONFIG_MEMORY_HOTPLUG */ static inline void make_bl(unsigned int *insn_addr, void *func) diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 977cb1ee5e7..47325f23c51 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -30,6 +30,7 @@ #include <linux/highmem.h> #include <linux/initrd.h> #include <linux/pagemap.h> +#include <linux/lmb.h> #include <asm/pgalloc.h> #include <asm/prom.h> @@ -41,7 +42,6 @@ #include <asm/machdep.h> #include <asm/btext.h> #include <asm/tlb.h> -#include <asm/lmb.h> #include <asm/sections.h> #include "mmu_decl.h" @@ -59,8 +59,8 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); unsigned long total_memory; unsigned long total_lowmem; -unsigned long ppc_memstart; -unsigned long ppc_memoffset = PAGE_OFFSET; +phys_addr_t memstart_addr; +phys_addr_t lowmem_end_addr; int boot_mapsize; #ifdef CONFIG_PPC_PMAC @@ -95,10 +95,10 @@ int __map_without_ltlbs; unsigned long __max_low_memory = MAX_LOW_MEM; /* - * limit of what is accessible with initial MMU setup - + * address of the limit of what is accessible with initial MMU setup - * 256MB usually, but only 16MB on 601. */ -unsigned long __initial_memory_limit = 0x10000000; +phys_addr_t __initial_memory_limit_addr = (phys_addr_t)0x10000000; /* * Check for command-line options that affect what MMU_init will do. @@ -131,10 +131,10 @@ void __init MMU_init(void) /* 601 can only access 16MB at the moment */ if (PVR_VER(mfspr(SPRN_PVR)) == 1) - __initial_memory_limit = 0x01000000; + __initial_memory_limit_addr = 0x01000000; /* 8xx can only access 8MB at the moment */ if (PVR_VER(mfspr(SPRN_PVR)) == 0x50) - __initial_memory_limit = 0x00800000; + __initial_memory_limit_addr = 0x00800000; /* parse args from command line */ MMU_setup(); @@ -145,8 +145,8 @@ void __init MMU_init(void) printk(KERN_WARNING "Only using first contiguous memory region"); } - total_memory = lmb_end_of_DRAM(); - total_lowmem = total_memory; + total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr; + lowmem_end_addr = memstart_addr + total_lowmem; #ifdef CONFIG_FSL_BOOKE /* Freescale Book-E parts expect lowmem to be mapped by fixed TLB @@ -157,9 +157,10 @@ void __init MMU_init(void) if (total_lowmem > __max_low_memory) { total_lowmem = __max_low_memory; + lowmem_end_addr = memstart_addr + total_lowmem; #ifndef CONFIG_HIGHMEM total_memory = total_lowmem; - lmb_enforce_memory_limit(total_lowmem); + lmb_enforce_memory_limit(lowmem_end_addr); lmb_analyze(); #endif /* CONFIG_HIGHMEM */ } @@ -184,8 +185,6 @@ void __init MMU_init(void) /* Map in I/O resources */ if (ppc_md.progress) ppc_md.progress("MMU:setio", 0x302); - if (ppc_md.setup_io_mappings) - ppc_md.setup_io_mappings(); /* Initialize the context management stuff */ mmu_context_init(); @@ -208,7 +207,7 @@ void __init *early_get_page(void) p = alloc_bootmem_pages(PAGE_SIZE); } else { p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE, - __initial_memory_limit)); + __initial_memory_limit_addr)); } return p; } @@ -276,7 +275,7 @@ static int __init setup_kcore(void) kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC); if (!kcore_mem) - panic("%s: kmalloc failed\n", __FUNCTION__); + panic("%s: kmalloc failed\n", __func__); /* must stay under 32 bits */ if ( 0xfffffffful - (unsigned long)__va(base) < size) { diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index c0f5cff7703..698bd000f98 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -38,11 +38,11 @@ #include <linux/nodemask.h> #include <linux/module.h> #include <linux/poison.h> +#include <linux/lmb.h> #include <asm/pgalloc.h> #include <asm/page.h> #include <asm/prom.h> -#include <asm/lmb.h> #include <asm/rtas.h> #include <asm/io.h> #include <asm/mmu_context.h> @@ -72,8 +72,7 @@ #warning TASK_SIZE is smaller than it needs to be. #endif -/* max amount of RAM to use */ -unsigned long __max_memory; +phys_addr_t memstart_addr; void free_initmem(void) { @@ -122,7 +121,7 @@ static int __init setup_kcore(void) /* GFP_ATOMIC to avoid might_sleep warnings during boot */ kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC); if (!kcore_mem) - panic("%s: kmalloc failed\n", __FUNCTION__); + panic("%s: kmalloc failed\n", __func__); kclist_add(kcore_mem, __va(base), size); } diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c deleted file mode 100644 index 4ce23bcf8a5..00000000000 --- a/arch/powerpc/mm/lmb.c +++ /dev/null @@ -1,357 +0,0 @@ -/* - * Procedures for maintaining information about logical memory blocks. - * - * Peter Bergner, IBM Corp. June 2001. - * Copyright (C) 2001 Peter Bergner. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/bitops.h> -#include <asm/types.h> -#include <asm/page.h> -#include <asm/prom.h> -#include <asm/lmb.h> -#ifdef CONFIG_PPC32 -#include "mmu_decl.h" /* for __max_low_memory */ -#endif - -#undef DEBUG - -#ifdef DEBUG -#include <asm/udbg.h> -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif - -#define LMB_ALLOC_ANYWHERE 0 - -struct lmb lmb; - -void lmb_dump_all(void) -{ -#ifdef DEBUG - unsigned long i; - - DBG("lmb_dump_all:\n"); - DBG(" memory.cnt = 0x%lx\n", lmb.memory.cnt); - DBG(" memory.size = 0x%lx\n", lmb.memory.size); - for (i=0; i < lmb.memory.cnt ;i++) { - DBG(" memory.region[0x%x].base = 0x%lx\n", - i, lmb.memory.region[i].base); - DBG(" .size = 0x%lx\n", - lmb.memory.region[i].size); - } - - DBG("\n reserved.cnt = 0x%lx\n", lmb.reserved.cnt); - DBG(" reserved.size = 0x%lx\n", lmb.reserved.size); - for (i=0; i < lmb.reserved.cnt ;i++) { - DBG(" reserved.region[0x%x].base = 0x%lx\n", - i, lmb.reserved.region[i].base); - DBG(" .size = 0x%lx\n", - lmb.reserved.region[i].size); - } -#endif /* DEBUG */ -} - -static unsigned long __init lmb_addrs_overlap(unsigned long base1, - unsigned long size1, unsigned long base2, unsigned long size2) -{ - return ((base1 < (base2+size2)) && (base2 < (base1+size1))); -} - -static long __init lmb_addrs_adjacent(unsigned long base1, unsigned long size1, - unsigned long base2, unsigned long size2) -{ - if (base2 == base1 + size1) - return 1; - else if (base1 == base2 + size2) - return -1; - - return 0; -} - -static long __init lmb_regions_adjacent(struct lmb_region *rgn, - unsigned long r1, unsigned long r2) -{ - unsigned long base1 = rgn->region[r1].base; - unsigned long size1 = rgn->region[r1].size; - unsigned long base2 = rgn->region[r2].base; - unsigned long size2 = rgn->region[r2].size; - - return lmb_addrs_adjacent(base1, size1, base2, size2); -} - -static void __init lmb_remove_region(struct lmb_region *rgn, unsigned long r) -{ - unsigned long i; - - for (i = r; i < rgn->cnt - 1; i++) { - rgn->region[i].base = rgn->region[i + 1].base; - rgn->region[i].size = rgn->region[i + 1].size; - } - rgn->cnt--; -} - -/* Assumption: base addr of region 1 < base addr of region 2 */ -static void __init lmb_coalesce_regions(struct lmb_region *rgn, - unsigned long r1, unsigned long r2) -{ - rgn->region[r1].size += rgn->region[r2].size; - lmb_remove_region(rgn, r2); -} - -/* This routine called with relocation disabled. */ -void __init lmb_init(void) -{ - /* Create a dummy zero size LMB which will get coalesced away later. - * This simplifies the lmb_add() code below... - */ - lmb.memory.region[0].base = 0; - lmb.memory.region[0].size = 0; - lmb.memory.cnt = 1; - - /* Ditto. */ - lmb.reserved.region[0].base = 0; - lmb.reserved.region[0].size = 0; - lmb.reserved.cnt = 1; -} - -/* This routine may be called with relocation disabled. */ -void __init lmb_analyze(void) -{ - int i; - - lmb.memory.size = 0; - - for (i = 0; i < lmb.memory.cnt; i++) - lmb.memory.size += lmb.memory.region[i].size; -} - -/* This routine called with relocation disabled. */ -static long __init lmb_add_region(struct lmb_region *rgn, unsigned long base, - unsigned long size) -{ - unsigned long coalesced = 0; - long adjacent, i; - - /* First try and coalesce this LMB with another. */ - for (i=0; i < rgn->cnt; i++) { - unsigned long rgnbase = rgn->region[i].base; - unsigned long rgnsize = rgn->region[i].size; - - if ((rgnbase == base) && (rgnsize == size)) - /* Already have this region, so we're done */ - return 0; - - adjacent = lmb_addrs_adjacent(base,size,rgnbase,rgnsize); - if ( adjacent > 0 ) { - rgn->region[i].base -= size; - rgn->region[i].size += size; - coalesced++; - break; - } - else if ( adjacent < 0 ) { - rgn->region[i].size += size; - coalesced++; - break; - } - } - - if ((i < rgn->cnt-1) && lmb_regions_adjacent(rgn, i, i+1) ) { - lmb_coalesce_regions(rgn, i, i+1); - coalesced++; - } - - if (coalesced) - return coalesced; - if (rgn->cnt >= MAX_LMB_REGIONS) - return -1; - - /* Couldn't coalesce the LMB, so add it to the sorted table. */ - for (i = rgn->cnt-1; i >= 0; i--) { - if (base < rgn->region[i].base) { - rgn->region[i+1].base = rgn->region[i].base; - rgn->region[i+1].size = rgn->region[i].size; - } else { - rgn->region[i+1].base = base; - rgn->region[i+1].size = size; - break; - } - } - rgn->cnt++; - - return 0; -} - -/* This routine may be called with relocation disabled. */ -long __init lmb_add(unsigned long base, unsigned long size) -{ - struct lmb_region *_rgn = &(lmb.memory); - - /* On pSeries LPAR systems, the first LMB is our RMO region. */ - if (base == 0) - lmb.rmo_size = size; - - return lmb_add_region(_rgn, base, size); - -} - -long __init lmb_reserve(unsigned long base, unsigned long size) -{ - struct lmb_region *_rgn = &(lmb.reserved); - - BUG_ON(0 == size); - - return lmb_add_region(_rgn, base, size); -} - -long __init lmb_overlaps_region(struct lmb_region *rgn, unsigned long base, - unsigned long size) -{ - unsigned long i; - - for (i=0; i < rgn->cnt; i++) { - unsigned long rgnbase = rgn->region[i].base; - unsigned long rgnsize = rgn->region[i].size; - if ( lmb_addrs_overlap(base,size,rgnbase,rgnsize) ) { - break; - } - } - - return (i < rgn->cnt) ? i : -1; -} - -unsigned long __init lmb_alloc(unsigned long size, unsigned long align) -{ - return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE); -} - -unsigned long __init lmb_alloc_base(unsigned long size, unsigned long align, - unsigned long max_addr) -{ - unsigned long alloc; - - alloc = __lmb_alloc_base(size, align, max_addr); - - if (alloc == 0) - panic("ERROR: Failed to allocate 0x%lx bytes below 0x%lx.\n", - size, max_addr); - - return alloc; -} - -unsigned long __init __lmb_alloc_base(unsigned long size, unsigned long align, - unsigned long max_addr) -{ - long i, j; - unsigned long base = 0; - - BUG_ON(0 == size); - -#ifdef CONFIG_PPC32 - /* On 32-bit, make sure we allocate lowmem */ - if (max_addr == LMB_ALLOC_ANYWHERE) - max_addr = __max_low_memory; -#endif - for (i = lmb.memory.cnt-1; i >= 0; i--) { - unsigned long lmbbase = lmb.memory.region[i].base; - unsigned long lmbsize = lmb.memory.region[i].size; - - if (max_addr == LMB_ALLOC_ANYWHERE) - base = _ALIGN_DOWN(lmbbase + lmbsize - size, align); - else if (lmbbase < max_addr) { - base = min(lmbbase + lmbsize, max_addr); - base = _ALIGN_DOWN(base - size, align); - } else - continue; - - while ((lmbbase <= base) && - ((j = lmb_overlaps_region(&lmb.reserved, base, size)) >= 0) ) - base = _ALIGN_DOWN(lmb.reserved.region[j].base - size, - align); - - if ((base != 0) && (lmbbase <= base)) - break; - } - - if (i < 0) - return 0; - - lmb_add_region(&lmb.reserved, base, size); - - return base; -} - -/* You must call lmb_analyze() before this. */ -unsigned long __init lmb_phys_mem_size(void) -{ - return lmb.memory.size; -} - -unsigned long __init lmb_end_of_DRAM(void) -{ - int idx = lmb.memory.cnt - 1; - - return (lmb.memory.region[idx].base + lmb.memory.region[idx].size); -} - -/* You must call lmb_analyze() after this. */ -void __init lmb_enforce_memory_limit(unsigned long memory_limit) -{ - unsigned long i, limit; - struct lmb_property *p; - - if (! memory_limit) - return; - - /* Truncate the lmb regions to satisfy the memory limit. */ - limit = memory_limit; - for (i = 0; i < lmb.memory.cnt; i++) { - if (limit > lmb.memory.region[i].size) { - limit -= lmb.memory.region[i].size; - continue; - } - - lmb.memory.region[i].size = limit; - lmb.memory.cnt = i + 1; - break; - } - - if (lmb.memory.region[0].size < lmb.rmo_size) - lmb.rmo_size = lmb.memory.region[0].size; - - /* And truncate any reserves above the limit also. */ - for (i = 0; i < lmb.reserved.cnt; i++) { - p = &lmb.reserved.region[i]; - - if (p->base > memory_limit) - p->size = 0; - else if ((p->base + p->size) > memory_limit) - p->size = memory_limit - p->base; - - if (p->size == 0) { - lmb_remove_region(&lmb.reserved, i); - i--; - } - } -} - -int __init lmb_is_reserved(unsigned long addr) -{ - int i; - - for (i = 0; i < lmb.reserved.cnt; i++) { - unsigned long upper = lmb.reserved.region[i].base + - lmb.reserved.region[i].size - 1; - if ((addr >= lmb.reserved.region[i].base) && (addr <= upper)) - return 1; - } - return 0; -} diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index be5c506779a..16def4dcff6 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -31,6 +31,7 @@ #include <linux/initrd.h> #include <linux/pagemap.h> #include <linux/suspend.h> +#include <linux/lmb.h> #include <asm/pgalloc.h> #include <asm/prom.h> @@ -42,7 +43,6 @@ #include <asm/machdep.h> #include <asm/btext.h> #include <asm/tlb.h> -#include <asm/lmb.h> #include <asm/sections.h> #include <asm/vdso.h> @@ -111,7 +111,7 @@ int memory_add_physaddr_to_nid(u64 start) } #endif -int __devinit arch_add_memory(int nid, u64 start, u64 size) +int arch_add_memory(int nid, u64 start, u64 size) { struct pglist_data *pgdata; struct zone *zone; @@ -175,7 +175,6 @@ void show_mem(void) printk("Mem-info:\n"); show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); for_each_online_pgdat(pgdat) { unsigned long flags; pgdat_resize_lock(pgdat, &flags); @@ -217,9 +216,11 @@ void __init do_init_bootmem(void) unsigned long total_pages; int boot_mapsize; - max_pfn = total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT; + max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT; + total_pages = (lmb_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT; #ifdef CONFIG_HIGHMEM total_pages = total_lowmem >> PAGE_SHIFT; + max_low_pfn = lowmem_end_addr >> PAGE_SHIFT; #endif /* @@ -245,18 +246,18 @@ void __init do_init_bootmem(void) * present. */ #ifdef CONFIG_HIGHMEM - free_bootmem_with_active_regions(0, total_lowmem >> PAGE_SHIFT); + free_bootmem_with_active_regions(0, lowmem_end_addr >> PAGE_SHIFT); /* reserve the sections we're already using */ for (i = 0; i < lmb.reserved.cnt; i++) { unsigned long addr = lmb.reserved.region[i].base + lmb_size_bytes(&lmb.reserved, i) - 1; - if (addr < total_lowmem) + if (addr < lowmem_end_addr) reserve_bootmem(lmb.reserved.region[i].base, lmb_size_bytes(&lmb.reserved, i), BOOTMEM_DEFAULT); - else if (lmb.reserved.region[i].base < total_lowmem) { - unsigned long adjusted_size = total_lowmem - + else if (lmb.reserved.region[i].base < lowmem_end_addr) { + unsigned long adjusted_size = lowmem_end_addr - lmb.reserved.region[i].base; reserve_bootmem(lmb.reserved.region[i].base, adjusted_size, BOOTMEM_DEFAULT); @@ -326,7 +327,7 @@ void __init paging_init(void) (top_of_ram - total_ram) >> 20); memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); #ifdef CONFIG_HIGHMEM - max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT; + max_zone_pfns[ZONE_DMA] = lowmem_end_addr >> PAGE_SHIFT; max_zone_pfns[ZONE_HIGHMEM] = top_of_ram >> PAGE_SHIFT; #else max_zone_pfns[ZONE_DMA] = top_of_ram >> PAGE_SHIFT; @@ -381,7 +382,7 @@ void __init mem_init(void) { unsigned long pfn, highmem_mapnr; - highmem_mapnr = total_lowmem >> PAGE_SHIFT; + highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT; for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) { struct page *page = pfn_to_page(pfn); if (lmb_is_reserved(pfn << PAGE_SHIFT)) diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index ebfd13dc9d1..04802252a64 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -48,9 +48,11 @@ extern unsigned int num_tlbcam_entries; extern unsigned long ioremap_bot; extern unsigned long __max_low_memory; -extern unsigned long __initial_memory_limit; +extern phys_addr_t __initial_memory_limit_addr; extern unsigned long total_memory; extern unsigned long total_lowmem; +extern phys_addr_t memstart_addr; +extern phys_addr_t lowmem_end_addr; /* ...and now those things that may be slightly different between processor * architectures. -- Dan diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index a300d254aac..1efd631211e 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -17,8 +17,9 @@ #include <linux/nodemask.h> #include <linux/cpu.h> #include <linux/notifier.h> +#include <linux/lmb.h> #include <asm/sparsemem.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/system.h> #include <asm/smp.h> diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index ac3390f8190..64c44bcc68d 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -281,12 +281,13 @@ int map_page(unsigned long va, phys_addr_t pa, int flags) */ void __init mapin_ram(void) { - unsigned long v, p, s, f; + unsigned long v, s, f; + phys_addr_t p; int ktext; s = mmu_mapin_ram(); v = KERNELBASE + s; - p = PPC_MEMSTART + s; + p = memstart_addr + s; for (; s < total_lowmem; s += PAGE_SIZE) { ktext = ((char *) v >= _stext && (char *) v < etext); f = ktext ?_PAGE_RAM_TEXT : _PAGE_RAM; diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index 5c45d474cfc..cef9f156874 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -26,11 +26,11 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/highmem.h> +#include <linux/lmb.h> #include <asm/prom.h> #include <asm/mmu.h> #include <asm/machdep.h> -#include <asm/lmb.h> #include "mmu_decl.h" @@ -82,7 +82,6 @@ unsigned long __init mmu_mapin_ram(void) #else unsigned long tot, bl, done; unsigned long max_size = (256<<20); - unsigned long align; if (__map_without_bats) { printk(KERN_DEBUG "RAM mapped without BATs\n"); @@ -93,19 +92,13 @@ unsigned long __init mmu_mapin_ram(void) /* Make sure we don't map a block larger than the smallest alignment of the physical address. */ - /* alignment of PPC_MEMSTART */ - align = ~(PPC_MEMSTART-1) & PPC_MEMSTART; - /* set BAT block size to MIN(max_size, align) */ - if (align && align < max_size) - max_size = align; - tot = total_lowmem; for (bl = 128<<10; bl < max_size; bl <<= 1) { if (bl * 2 > tot) break; } - setbat(2, KERNELBASE, PPC_MEMSTART, bl, _PAGE_RAM); + setbat(2, KERNELBASE, 0, bl, _PAGE_RAM); done = (unsigned long)bat_addrs[2].limit - KERNELBASE + 1; if ((done < tot) && !bat_addrs[3].limit) { /* use BAT3 to cover a bit more */ @@ -113,7 +106,7 @@ unsigned long __init mmu_mapin_ram(void) for (bl = 128<<10; bl < max_size; bl <<= 1) if (bl * 2 > tot) break; - setbat(3, KERNELBASE+done, PPC_MEMSTART+done, bl, _PAGE_RAM); + setbat(3, KERNELBASE+done, done, bl, _PAGE_RAM); done = (unsigned long)bat_addrs[3].limit - KERNELBASE + 1; } @@ -240,7 +233,7 @@ void __init MMU_init_hw(void) */ if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322); Hash = __va(lmb_alloc_base(Hash_size, Hash_size, - __initial_memory_limit)); + __initial_memory_limit_addr)); cacheable_memzero(Hash, Hash_size); _SDR1 = __pa(Hash) | SDR1_LOW_BITS; diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c index 50448d5de9d..efbbd13d93e 100644 --- a/arch/powerpc/mm/stab.c +++ b/arch/powerpc/mm/stab.c @@ -12,12 +12,14 @@ * 2 of the License, or (at your option) any later version. */ +#include <linux/lmb.h> + #include <asm/pgtable.h> #include <asm/mmu.h> #include <asm/mmu_context.h> #include <asm/paca.h> #include <asm/cputable.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/abs_addr.h> #include <asm/firmware.h> #include <asm/iseries/hv_call.h> diff --git a/arch/powerpc/oprofile/cell/spu_task_sync.c b/arch/powerpc/oprofile/cell/spu_task_sync.c index 257b13cb18a..2a9b4a04932 100644 --- a/arch/powerpc/oprofile/cell/spu_task_sync.c +++ b/arch/powerpc/oprofile/cell/spu_task_sync.c @@ -68,7 +68,7 @@ static struct cached_info *get_cached_info(struct spu *the_spu, int spu_num) if (spu_num >= num_spu_nodes) { printk(KERN_ERR "SPU_PROF: " "%s, line %d: Invalid index %d into spu info cache\n", - __FUNCTION__, __LINE__, spu_num); + __func__, __LINE__, spu_num); ret_info = NULL; goto out; } @@ -115,7 +115,7 @@ prepare_cached_spu_info(struct spu *spu, unsigned long objectId) if (!info) { printk(KERN_ERR "SPU_PROF: " "%s, line %d: create vma_map failed\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); retval = -ENOMEM; goto err_alloc; } @@ -123,7 +123,7 @@ prepare_cached_spu_info(struct spu *spu, unsigned long objectId) if (!new_map) { printk(KERN_ERR "SPU_PROF: " "%s, line %d: create vma_map failed\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); retval = -ENOMEM; goto err_alloc; } @@ -171,7 +171,7 @@ static int release_cached_info(int spu_index) printk(KERN_ERR "SPU_PROF: " "%s, line %d: " "Invalid index %d into spu info cache\n", - __FUNCTION__, __LINE__, spu_index); + __func__, __LINE__, spu_index); goto out; } end = spu_index + 1; @@ -273,7 +273,7 @@ fail_no_image_cookie: printk(KERN_ERR "SPU_PROF: " "%s, line %d: Cannot find dcookie for SPU binary\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); goto out; } @@ -467,7 +467,7 @@ int spu_sync_stop(void) if (ret) { printk(KERN_ERR "SPU_PROF: " "%s, line %d: spu_switch_event_unregister returned %d\n", - __FUNCTION__, __LINE__, ret); + __func__, __LINE__, ret); goto out; } diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c index 9a932177e70..fff66662d02 100644 --- a/arch/powerpc/oprofile/cell/vma_map.c +++ b/arch/powerpc/oprofile/cell/vma_map.c @@ -72,7 +72,7 @@ vma_map_add(struct vma_to_fileoffset_map *map, unsigned int vma, kzalloc(sizeof(struct vma_to_fileoffset_map), GFP_KERNEL); if (!new) { printk(KERN_ERR "SPU_PROF: %s, line %d: malloc failed\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); vma_map_free(map); return NULL; } @@ -134,19 +134,19 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) { printk(KERN_ERR "SPU_PROF: " "%s, line %d: Unexpected e_ident parsing SPU ELF\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); goto fail; } if (ehdr.e_machine != EM_SPU) { printk(KERN_ERR "SPU_PROF: " "%s, line %d: Unexpected e_machine parsing SPU ELF\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); goto fail; } if (ehdr.e_type != ET_EXEC) { printk(KERN_ERR "SPU_PROF: " "%s, line %d: Unexpected e_type parsing SPU ELF\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); goto fail; } phdr_start = spu_elf_start + ehdr.e_phoff; @@ -232,7 +232,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu, if (overlay_tbl_offset < 0) { printk(KERN_ERR "SPU_PROF: " "%s, line %d: Error finding SPU overlay table\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); goto fail; } ovly_table = spu_elf_start + overlay_tbl_offset; diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 9eed1f68fca..5ff4de3eb3b 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -216,7 +216,7 @@ static void pm_rtas_reset_signals(u32 node) * failure to stop OProfile. */ printk(KERN_WARNING "%s: rtas returned: %d\n", - __FUNCTION__, ret); + __func__, ret); } static int pm_rtas_activate_signals(u32 node, u32 count) @@ -255,7 +255,7 @@ static int pm_rtas_activate_signals(u32 node, u32 count) if (unlikely(ret)) { printk(KERN_WARNING "%s: rtas returned: %d\n", - __FUNCTION__, ret); + __func__, ret); return -EIO; } } @@ -560,7 +560,7 @@ static int cell_reg_setup(struct op_counter_config *ctr, if (unlikely(spu_rtas_token == RTAS_UNKNOWN_SERVICE)) { printk(KERN_ERR "%s: rtas token ibm,cbe-spu-perftools unknown\n", - __FUNCTION__); + __func__); return -EIO; } } @@ -576,7 +576,7 @@ static int cell_reg_setup(struct op_counter_config *ctr, if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) { printk(KERN_ERR "%s: rtas token ibm,cbe-perftools unknown\n", - __FUNCTION__); + __func__); return -EIO; } @@ -853,7 +853,7 @@ static int pm_rtas_activate_spu_profiling(u32 node) if (unlikely(ret)) { printk(KERN_WARNING "%s: rtas returned: %d\n", - __FUNCTION__, ret); + __func__, ret); return -EIO; } @@ -949,7 +949,7 @@ static int cell_global_start_spu(struct op_counter_config *ctr) if (unlikely(ret != 0)) { printk(KERN_ERR "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n", - __FUNCTION__, ret); + __func__, ret); rtas_error = -EIO; goto out; } @@ -1061,7 +1061,7 @@ static void cell_global_stop_spu(void) if (unlikely(rtn_value != 0)) { printk(KERN_ERR "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n", - __FUNCTION__, rtn_value); + __func__, rtn_value); } /* Deactivate the signals */ diff --git a/arch/powerpc/platforms/40x/ep405.c b/arch/powerpc/platforms/40x/ep405.c index 13d1345026d..ae2e7f67c18 100644 --- a/arch/powerpc/platforms/40x/ep405.c +++ b/arch/powerpc/platforms/40x/ep405.c @@ -29,6 +29,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> +#include <asm/ppc4xx.h> static struct device_node *bcsr_node; static void __iomem *bcsr_regs; @@ -119,5 +120,6 @@ define_machine(ep405) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/40x/kilauea.c b/arch/powerpc/platforms/40x/kilauea.c index f9206a7fede..1dd24ffc0dc 100644 --- a/arch/powerpc/platforms/40x/kilauea.c +++ b/arch/powerpc/platforms/40x/kilauea.c @@ -1,7 +1,7 @@ /* * Kilauea board specific routines * - * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de> + * Copyright 2007-2008 DENX Software Engineering, Stefan Roese <sr@denx.de> * * Based on the Walnut code by * Josh Boyer <jwboyer@linux.vnet.ibm.com> @@ -20,6 +20,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> +#include <asm/ppc4xx.h> static __initdata struct of_device_id kilauea_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -54,5 +55,6 @@ define_machine(kilauea) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/40x/makalu.c b/arch/powerpc/platforms/40x/makalu.c index 4e4df72fc9c..a6a1d6017b7 100644 --- a/arch/powerpc/platforms/40x/makalu.c +++ b/arch/powerpc/platforms/40x/makalu.c @@ -20,6 +20,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> +#include <asm/ppc4xx.h> static __initdata struct of_device_id makalu_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -54,5 +55,6 @@ define_machine(makalu) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c index 0422590040d..fc7fb001276 100644 --- a/arch/powerpc/platforms/40x/virtex.c +++ b/arch/powerpc/platforms/40x/virtex.c @@ -14,6 +14,7 @@ #include <asm/prom.h> #include <asm/time.h> #include <asm/xilinx_intc.h> +#include <asm/ppc4xx.h> static struct of_device_id xilinx_of_bus_ids[] __initdata = { { .compatible = "xlnx,plb-v46-1.00.a", }, @@ -48,5 +49,6 @@ define_machine(virtex) { .probe = virtex_probe, .init_IRQ = xilinx_intc_init_tree, .get_irq = xilinx_intc_get_irq, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/40x/walnut.c b/arch/powerpc/platforms/40x/walnut.c index b8b257efeb7..335df91fbee 100644 --- a/arch/powerpc/platforms/40x/walnut.c +++ b/arch/powerpc/platforms/40x/walnut.c @@ -26,6 +26,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> +#include <asm/ppc4xx.h> static __initdata struct of_device_id walnut_of_bus[] = { { .compatible = "ibm,plb3", }, @@ -61,5 +62,6 @@ define_machine(walnut) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, - .calibrate_decr = generic_calibrate_decr, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/44x/44x.h b/arch/powerpc/platforms/44x/44x.h index 42eabf87fea..dbc4d2b4301 100644 --- a/arch/powerpc/platforms/44x/44x.h +++ b/arch/powerpc/platforms/44x/44x.h @@ -3,6 +3,5 @@ extern u8 as1_readb(volatile u8 __iomem *addr); extern void as1_writeb(u8 data, volatile u8 __iomem *addr); -extern void ppc44x_reset_system(char *cmd); #endif /* __POWERPC_PLATFORMS_44X_44X_H */ diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 1bfb2191010..6abe91357ee 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -67,6 +67,25 @@ config WARP See http://www.pikatechnologies.com/ and follow the "PIKA for Computer Telephony Developers" link for more information. +config CANYONLANDS + bool "Canyonlands" + depends on 44x + default n + select 460EX + select PCI + select PPC4xx_PCI_EXPRESS + help + This option enables support for the AMCC PPC460EX evaluation board. + +config YOSEMITE + bool "Yosemite" + depends on 44x + default n + select 440EP + select PCI + help + This option enables support for the AMCC PPC440EP evaluation board. + #config LUAN # bool "Luan" # depends on 44x @@ -122,6 +141,14 @@ config 440SPe bool select IBM_NEW_EMAC_EMAC4 +config 460EX + bool + select PPC_FPU + select IBM_NEW_EMAC_EMAC4 + select IBM_NEW_EMAC_RGMII + select IBM_NEW_EMAC_ZMII + select IBM_NEW_EMAC_TAH + # 44x errata/workaround config symbols, selected by the CPU models above config IBM440EP_ERR42 bool diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 0864d4f1cbc..774165f9acd 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -1,9 +1,11 @@ -obj-$(CONFIG_44x) := misc_44x.o +obj-$(CONFIG_44x) := misc_44x.o idle.o obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_TAISHAN) += taishan.o obj-$(CONFIG_BAMBOO) += bamboo.o +obj-$(CONFIG_YOSEMITE) += bamboo.o obj-$(CONFIG_SEQUOIA) += sequoia.o obj-$(CONFIG_KATMAI) += katmai.o obj-$(CONFIG_RAINIER) += rainier.o obj-$(CONFIG_WARP) += warp.o obj-$(CONFIG_WARP) += warp-nand.o +obj-$(CONFIG_CANYONLANDS) += canyonlands.o diff --git a/arch/powerpc/platforms/44x/bamboo.c b/arch/powerpc/platforms/44x/bamboo.c index fb9a22a7e8d..cef169e9515 100644 --- a/arch/powerpc/platforms/44x/bamboo.c +++ b/arch/powerpc/platforms/44x/bamboo.c @@ -22,8 +22,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> - -#include "44x.h" +#include <asm/ppc4xx.h> static __initdata struct of_device_id bamboo_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -53,11 +52,11 @@ static int __init bamboo_probe(void) } define_machine(bamboo) { - .name = "Bamboo", - .probe = bamboo_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, + .name = "Bamboo", + .probe = bamboo_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c new file mode 100644 index 00000000000..3949289f51d --- /dev/null +++ b/arch/powerpc/platforms/44x/canyonlands.c @@ -0,0 +1,63 @@ +/* + * Canyonlands board specific routines + * + * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * Based on the Katmai code by + * Benjamin Herrenschmidt <benh@kernel.crashing.org> + * Copyright 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright 2007 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/init.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/pci-bridge.h> +#include <asm/ppc4xx.h> + +static __initdata struct of_device_id canyonlands_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init canyonlands_device_probe(void) +{ + of_platform_bus_probe(NULL, canyonlands_of_bus, NULL); + + return 0; +} +machine_device_initcall(canyonlands, canyonlands_device_probe); + +static int __init canyonlands_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "amcc,canyonlands")) + return 0; + + ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; + + return 1; +} + +define_machine(canyonlands) { + .name = "Canyonlands", + .probe = canyonlands_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/44x/ebony.c b/arch/powerpc/platforms/44x/ebony.c index 1a8d467bff8..a0e8fe4662f 100644 --- a/arch/powerpc/platforms/44x/ebony.c +++ b/arch/powerpc/platforms/44x/ebony.c @@ -26,8 +26,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> - -#include "44x.h" +#include <asm/ppc4xx.h> static __initdata struct of_device_id ebony_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -66,6 +65,6 @@ define_machine(ebony) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/44x/idle.c b/arch/powerpc/platforms/44x/idle.c new file mode 100644 index 00000000000..7a81f921fef --- /dev/null +++ b/arch/powerpc/platforms/44x/idle.c @@ -0,0 +1,67 @@ +/* + * Copyright 2008 IBM Corp. + * + * Based on arch/powerpc/platforms/pasemi/idle.c: + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Added by: Jerone Young <jyoung5@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/of.h> +#include <linux/kernel.h> +#include <asm/machdep.h> + +static int mode_spin; + +static void ppc44x_idle(void) +{ + unsigned long msr_save; + + msr_save = mfmsr(); + /* set wait state MSR */ + mtmsr(msr_save|MSR_WE|MSR_EE|MSR_CE|MSR_DE); + isync(); + /* return to initial state */ + mtmsr(msr_save); + isync(); +} + +int __init ppc44x_idle_init(void) +{ + if (!mode_spin) { + /* If we are not setting spin mode + then we set to wait mode */ + ppc_md.power_save = &ppc44x_idle; + } + + return 0; +} + +arch_initcall(ppc44x_idle_init); + +static int __init idle_param(char *p) +{ + + if (!strcmp("spin", p)) { + mode_spin = 1; + ppc_md.power_save = NULL; + } + + return 0; +} + +early_param("idle", idle_param); diff --git a/arch/powerpc/platforms/44x/katmai.c b/arch/powerpc/platforms/44x/katmai.c index 11134121f27..44f4b3a00ce 100644 --- a/arch/powerpc/platforms/44x/katmai.c +++ b/arch/powerpc/platforms/44x/katmai.c @@ -22,8 +22,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> - -#include "44x.h" +#include <asm/ppc4xx.h> static __initdata struct of_device_id katmai_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -58,6 +57,6 @@ define_machine(katmai) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/44x/misc_44x.S b/arch/powerpc/platforms/44x/misc_44x.S index 3bce71d5d75..dc12b8009e4 100644 --- a/arch/powerpc/platforms/44x/misc_44x.S +++ b/arch/powerpc/platforms/44x/misc_44x.S @@ -44,14 +44,3 @@ _GLOBAL(as1_writeb) sync isync blr - -/* - * void ppc44x_reset_system(char *cmd) - * - * At present, this routine just applies a system reset. - */ -_GLOBAL(ppc44x_reset_system) - mfspr r13,SPRN_DBCR0 - oris r13,r13,DBCR0_RST_SYSTEM@h - mtspr SPRN_DBCR0,r13 - b . /* Just in case the reset doesn't work */ diff --git a/arch/powerpc/platforms/44x/rainier.c b/arch/powerpc/platforms/44x/rainier.c index a7fae1cf69c..4f1ff84c4b6 100644 --- a/arch/powerpc/platforms/44x/rainier.c +++ b/arch/powerpc/platforms/44x/rainier.c @@ -22,7 +22,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> -#include "44x.h" +#include <asm/ppc4xx.h> static __initdata struct of_device_id rainier_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -57,6 +57,6 @@ define_machine(rainier) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/44x/sequoia.c b/arch/powerpc/platforms/44x/sequoia.c index d279db42c89..49eb73daacd 100644 --- a/arch/powerpc/platforms/44x/sequoia.c +++ b/arch/powerpc/platforms/44x/sequoia.c @@ -23,7 +23,7 @@ #include <asm/uic.h> #include <asm/pci-bridge.h> -#include "44x.h" +#include <asm/ppc4xx.h> static __initdata struct of_device_id sequoia_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -58,6 +58,6 @@ define_machine(sequoia) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/44x/taishan.c b/arch/powerpc/platforms/44x/taishan.c index 28ab7e2e02c..49c78b2098b 100644 --- a/arch/powerpc/platforms/44x/taishan.c +++ b/arch/powerpc/platforms/44x/taishan.c @@ -29,8 +29,7 @@ #include <asm/time.h> #include <asm/uic.h> #include <asm/pci-bridge.h> - -#include "44x.h" +#include <asm/ppc4xx.h> static __initdata struct of_device_id taishan_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -68,6 +67,6 @@ define_machine(taishan) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c index 84ab78ff8c0..9150318cfc5 100644 --- a/arch/powerpc/platforms/44x/warp-nand.c +++ b/arch/powerpc/platforms/44x/warp-nand.c @@ -11,6 +11,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/mtd/ndfc.h> +#include <asm/machdep.h> #ifdef CONFIG_MTD_NAND_NDFC @@ -100,6 +101,6 @@ static int warp_setup_nand_flash(void) return 0; } -device_initcall(warp_setup_nand_flash); +machine_device_initcall(warp, warp_setup_nand_flash); #endif diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c index da5b7b7599d..39cf6150a72 100644 --- a/arch/powerpc/platforms/44x/warp.c +++ b/arch/powerpc/platforms/44x/warp.c @@ -18,9 +18,7 @@ #include <asm/udbg.h> #include <asm/time.h> #include <asm/uic.h> - -#include "44x.h" - +#include <asm/ppc4xx.h> static __initdata struct of_device_id warp_of_bus[] = { { .compatible = "ibm,plb4", }, @@ -49,7 +47,7 @@ define_machine(warp) { .progress = udbg_progress, .init_IRQ = uic_init_tree, .get_irq = uic_get_irq, - .restart = ppc44x_reset_system, + .restart = ppc4xx_reset_system, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c index 956f459e175..6d584f4e3c9 100644 --- a/arch/powerpc/platforms/52xx/lite5200.c +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -63,7 +63,7 @@ lite5200_fix_clock_config(void) of_node_put(np); if (!cdm) { printk(KERN_ERR "%s() failed; expect abnormal behaviour\n", - __FUNCTION__); + __func__); return; } @@ -98,7 +98,7 @@ lite5200_fix_port_config(void) of_node_put(np); if (!gpio) { printk(KERN_ERR "%s() failed. expect abnormal behavior\n", - __FUNCTION__); + __func__); return; } diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig index 4fad6c7bf9f..917ac889155 100644 --- a/arch/powerpc/platforms/82xx/Kconfig +++ b/arch/powerpc/platforms/82xx/Kconfig @@ -11,7 +11,6 @@ config MPC8272_ADS select 8260 select FSL_SOC select PQ2_ADS_PCI_PIC if PCI - select PPC_CPM_NEW_BINDING help This option enables support for the MPC8272 ADS board @@ -22,7 +21,6 @@ config PQ2FADS select 8260 select FSL_SOC select PQ2_ADS_PCI_PIC if PCI - select PPC_CPM_NEW_BINDING help This option enables support for the PQ2FADS board @@ -31,7 +29,6 @@ config EP8248E select 8272 select 8260 select FSL_SOC - select PPC_CPM_NEW_BINDING select MDIO_BITBANG help This enables support for the Embedded Planet EP8248E board. diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c index 2293ae51383..c00356bdb1d 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c @@ -46,6 +46,7 @@ static void __init mpc837x_rdb_setup_arch(void) static struct of_device_id mpc837x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 68065e62fc3..88a3b5cabb1 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -16,6 +16,7 @@ #define MPC83XX_SCCR_USB_DRCM_10 0x00200000 #define MPC8315_SCCR_USB_MASK 0x00c00000 #define MPC8315_SCCR_USB_DRCM_11 0x00c00000 +#define MPC8315_SCCR_USB_DRCM_01 0x00400000 #define MPC837X_SCCR_USB_DRCM_11 0x00c00000 /* system i/o configuration register low */ @@ -37,6 +38,7 @@ /* USB Control Register */ #define FSL_USB2_CONTROL_OFFS 0x500 #define CONTROL_UTMI_PHY_EN 0x00000200 +#define CONTROL_REFSEL_24MHZ 0x00000040 #define CONTROL_REFSEL_48MHZ 0x00000080 #define CONTROL_PHY_CLK_SEL_ULPI 0x00000400 #define CONTROL_OTG_PORT 0x00000020 diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c index 471fdd8f410..64bcf0a33c7 100644 --- a/arch/powerpc/platforms/83xx/usb.c +++ b/arch/powerpc/platforms/83xx/usb.c @@ -129,7 +129,7 @@ int mpc831x_usb_cfg(void) if (immr_node && of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC8315_SCCR_USB_MASK, - MPC8315_SCCR_USB_DRCM_11); + MPC8315_SCCR_USB_DRCM_01); else clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC83XX_SCCR_USB_MASK, @@ -164,9 +164,15 @@ int mpc831x_usb_cfg(void) /* Using on-chip PHY */ if (prop && (!strcmp(prop, "utmi_wide") || !strcmp(prop, "utmi"))) { - /* Set UTMI_PHY_EN, REFSEL to 48MHZ */ + u32 refsel; + + if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) + refsel = CONTROL_REFSEL_24MHZ; + else + refsel = CONTROL_REFSEL_48MHZ; + /* Set UTMI_PHY_EN and REFSEL */ out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, - CONTROL_UTMI_PHY_EN | CONTROL_REFSEL_48MHZ); + CONTROL_UTMI_PHY_EN | refsel); /* Using external UPLI PHY */ } else if (prop && !strcmp(prop, "ulpi")) { /* Set PHY_CLK_SEL to ULPI */ diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 7e76ddbd582..7ff29d53dc2 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -19,7 +19,6 @@ config MPC8540_ADS config MPC8560_ADS bool "Freescale MPC8560 ADS" select DEFAULT_UIMAGE - select PPC_CPM_NEW_BINDING select CPM2 help This option enables support for the MPC 8560 ADS board @@ -46,6 +45,12 @@ config MPC85xx_DS help This option enables support for the MPC85xx DS (MPC8544 DS) board +config KSI8560 + bool "Emerson KSI8560" + select DEFAULT_UIMAGE + help + This option enables support for the Emerson KSI8560 board + config STX_GP3 bool "Silicon Turnkey Express GP3" help @@ -53,14 +58,12 @@ config STX_GP3 board. select CPM2 select DEFAULT_UIMAGE - select PPC_CPM_NEW_BINDING config TQM8540 bool "TQ Components TQM8540" help This option enables support for the TQ Components TQM8540 board. select DEFAULT_UIMAGE - select PPC_CPM_NEW_BINDING select TQM85xx config TQM8541 @@ -68,7 +71,6 @@ config TQM8541 help This option enables support for the TQ Components TQM8541 board. select DEFAULT_UIMAGE - select PPC_CPM_NEW_BINDING select TQM85xx select CPM2 @@ -77,7 +79,6 @@ config TQM8555 help This option enables support for the TQ Components TQM8555 board. select DEFAULT_UIMAGE - select PPC_CPM_NEW_BINDING select TQM85xx select CPM2 @@ -86,7 +87,6 @@ config TQM8560 help This option enables support for the TQ Components TQM8560 board. select DEFAULT_UIMAGE - select PPC_CPM_NEW_BINDING select TQM85xx select CPM2 @@ -99,7 +99,6 @@ config SBC8548 config SBC8560 bool "Wind River SBC8560" select DEFAULT_UIMAGE - select PPC_CPM_NEW_BINDING if CPM2 help This option enables support for the Wind River SBC8560 board diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index cb7af4ebd75..6cea185f62b 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o obj-$(CONFIG_SBC8560) += sbc8560.o obj-$(CONFIG_SBC8548) += sbc8548.o +obj-$(CONFIG_KSI8560) += ksi8560.o diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c new file mode 100644 index 00000000000..2145adeb220 --- /dev/null +++ b/arch/powerpc/platforms/85xx/ksi8560.c @@ -0,0 +1,257 @@ +/* + * Board setup routines for the Emerson KSI8560 + * + * Author: Alexandr Smirnov <asmirnov@ru.mvista.com> + * + * Based on mpc85xx_ads.c maintained by Kumar Gala + * + * 2008 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/of_platform.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/mpic.h> +#include <mm/mmu_decl.h> +#include <asm/udbg.h> +#include <asm/prom.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#include <asm/cpm2.h> +#include <sysdev/cpm2_pic.h> + + +#define KSI8560_CPLD_HVR 0x04 /* Hardware Version Register */ +#define KSI8560_CPLD_PVR 0x08 /* PLD Version Register */ +#define KSI8560_CPLD_RCR1 0x30 /* Reset Command Register 1 */ + +#define KSI8560_CPLD_RCR1_CPUHR 0x80 /* CPU Hard Reset */ + +static void __iomem *cpld_base = NULL; + +static void machine_restart(char *cmd) +{ + if (cpld_base) + out_8(cpld_base + KSI8560_CPLD_RCR1, KSI8560_CPLD_RCR1_CPUHR); + else + printk(KERN_ERR "Can't find CPLD base, hang forever\n"); + + for (;;); +} + +static void cpm2_cascade(unsigned int irq, struct irq_desc *desc) +{ + int cascade_irq; + + while ((cascade_irq = cpm2_get_irq()) >= 0) + generic_handle_irq(cascade_irq); + + desc->chip->eoi(irq); +} + +static void __init ksi8560_pic_init(void) +{ + struct mpic *mpic; + struct resource r; + struct device_node *np; +#ifdef CONFIG_CPM2 + int irq; +#endif + + np = of_find_node_by_type(NULL, "open-pic"); + + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } + + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Could not map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 0, 256, " OpenPIC "); + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_init(mpic); + +#ifdef CONFIG_CPM2 + /* Setup CPM2 PIC */ + np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic"); + if (np == NULL) { + printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n"); + return; + } + irq = irq_of_parse_and_map(np, 0); + + cpm2_pic_init(np); + of_node_put(np); + set_irq_chained_handler(irq, cpm2_cascade); + + setup_irq(0, NULL); +#endif +} + +#ifdef CONFIG_CPM2 +/* + * Setup I/O ports + */ +struct cpm_pin { + int port, pin, flags; +}; + +static struct cpm_pin __initdata ksi8560_pins[] = { + /* SCC1 */ + {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* SCC2 */ + {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + + /* FCC1 */ + {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, + {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, + {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, + {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, + {2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK9 */ + {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK10 */ + +}; + +static void __init init_ioports(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ksi8560_pins); i++) { + struct cpm_pin *pin = &ksi8560_pins[i]; + cpm2_set_pin(pin->port, pin->pin, pin->flags); + } + + cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX); + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_RX); + cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX); +} +#endif + +/* + * Setup the architecture + */ +static void __init ksi8560_setup_arch(void) +{ + struct device_node *cpld; + + cpld = of_find_compatible_node(NULL, NULL, "emerson,KSI8560-cpld"); + if (cpld) + cpld_base = of_iomap(cpld, 0); + else + printk(KERN_ERR "Can't find CPLD in device tree\n"); + + if (ppc_md.progress) + ppc_md.progress("ksi8560_setup_arch()", 0); + +#ifdef CONFIG_CPM2 + cpm2_reset(); + init_ioports(); +#endif +} + +static void ksi8560_show_cpuinfo(struct seq_file *m) +{ + uint pvid, svid, phid1; + uint memsize = total_memory; + + pvid = mfspr(SPRN_PVR); + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Emerson Network Power\n"); + seq_printf(m, "Board\t\t: KSI8560\n"); + + if (cpld_base) { + seq_printf(m, "Hardware rev\t: %d\n", + in_8(cpld_base + KSI8560_CPLD_HVR)); + seq_printf(m, "CPLD rev\t: %d\n", + in_8(cpld_base + KSI8560_CPLD_PVR)); + } else + seq_printf(m, "Unknown Hardware and CPLD revs\n"); + + seq_printf(m, "PVR\t\t: 0x%x\n", pvid); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); + + /* Display the amount of memory */ + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); +} + +static struct of_device_id __initdata of_bus_ids[] = { + { .type = "soc", }, + { .name = "cpm", }, + { .name = "localbus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(ksi8560, declare_of_platform_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init ksi8560_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "emerson,KSI8560"); +} + +define_machine(ksi8560) { + .name = "KSI8560", + .probe = ksi8560_probe, + .setup_arch = ksi8560_setup_arch, + .init_IRQ = ksi8560_pic_init, + .show_cpuinfo = ksi8560_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = machine_restart, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 4e030509611..3582c841844 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -165,7 +165,7 @@ static void __init init_ioports(void) int i; for (i = 0; i < ARRAY_SIZE(mpc8560_ads_pins); i++) { - struct cpm_pin *pin = &mpc8560_ads_pins[i]; + const struct cpm_pin *pin = &mpc8560_ads_pins[i]; cpm2_set_pin(pin->port, pin->pin, pin->flags); } diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index bdb3d0b38cd..dfd8b4ad9b2 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -19,6 +19,7 @@ #include <linux/delay.h> #include <linux/seq_file.h> #include <linux/interrupt.h> +#include <linux/of_platform.h> #include <asm/system.h> #include <asm/time.h> @@ -36,7 +37,7 @@ #undef DEBUG #ifdef DEBUG -#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args) +#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) #else #define DBG(fmt, args...) #endif @@ -183,6 +184,18 @@ static int __init mpc8544_ds_probe(void) } } +static struct of_device_id mpc85xxds_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + {}, +}; + +static int __init mpc85xxds_publish_devices(void) +{ + return of_platform_bus_probe(NULL, mpc85xxds_ids, NULL); +} +machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices); + /* * Called very early, device-tree isn't unflattened */ diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 21d113536b8..7442c58d44f 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -11,6 +11,12 @@ config MPC8641_HPCN help This option enables support for the MPC8641 HPCN board. +config SBC8641D + bool "Wind River SBC8641D" + select DEFAULT_UIMAGE + help + This option enables support for the WRS SBC8641D board. + config MPC8610_HPCD bool "Freescale MPC8610 HPCD" select DEFAULT_UIMAGE @@ -24,7 +30,7 @@ config MPC8641 select FSL_PCI if PCI select PPC_UDBG_16550 select MPIC - default y if MPC8641_HPCN + default y if MPC8641_HPCN || SBC8641D config MPC8610 bool diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile index c96706327ea..1b9b4a9b252 100644 --- a/arch/powerpc/platforms/86xx/Makefile +++ b/arch/powerpc/platforms/86xx/Makefile @@ -4,4 +4,5 @@ obj-$(CONFIG_SMP) += mpc86xx_smp.o obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o +obj-$(CONFIG_SBC8641D) += sbc8641d.o obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index 0b07485641f..18b8ebe930d 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -52,7 +52,7 @@ static int __init mpc8610_declare_of_platform_devices(void) } machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices); -void __init +static void __init mpc86xx_hpcd_init_irq(void) { struct mpic *mpic1; @@ -200,7 +200,7 @@ static int __init mpc86xx_hpcd_probe(void) return 0; } -long __init +static long __init mpc86xx_time_init(void) { unsigned int temp; diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index cfbe8c52e26..f947f555fd4 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -55,7 +55,7 @@ static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc) } #endif /* CONFIG_PCI */ -void __init +static void __init mpc86xx_hpcn_init_irq(void) { struct mpic *mpic1; @@ -162,7 +162,7 @@ mpc86xx_hpcn_setup_arch(void) } -void +static void mpc86xx_hpcn_show_cpuinfo(struct seq_file *m) { struct device_node *root; @@ -190,13 +190,19 @@ static int __init mpc86xx_hpcn_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (of_flat_dt_is_compatible(root, "mpc86xx")) + if (of_flat_dt_is_compatible(root, "fsl,mpc8641hpcn")) return 1; /* Looks good */ + /* Be nice and don't give silent boot death. Delete this in 2.6.27 */ + if (of_flat_dt_is_compatible(root, "mpc86xx")) { + pr_warning("WARNING: your dts/dtb is old. You must update before the next kernel release\n"); + return 1; + } + return 0; } -long __init +static long __init mpc86xx_time_init(void) { unsigned int temp; diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c new file mode 100644 index 00000000000..510a06ef0b5 --- /dev/null +++ b/arch/powerpc/platforms/86xx/sbc8641d.c @@ -0,0 +1,164 @@ +/* + * SBC8641D board specific routines + * + * Copyright 2008 Wind River Systems Inc. + * + * By Paul Gortmaker (see MAINTAINERS for contact information) + * + * Based largely on the 8641 HPCN support by Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/of_platform.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/mpc86xx.h> +#include <asm/prom.h> +#include <mm/mmu_decl.h> +#include <asm/udbg.h> + +#include <asm/mpic.h> + +#include <sysdev/fsl_pci.h> +#include <sysdev/fsl_soc.h> + +#include "mpc86xx.h" + +static void __init +sbc8641_init_irq(void) +{ + struct mpic *mpic1; + struct device_node *np; + struct resource res; + + /* Determine PIC address. */ + np = of_find_node_by_type(NULL, "open-pic"); + if (np == NULL) + return; + of_address_to_resource(np, 0, &res); + + /* Alloc mpic structure and per isu has 16 INT entries. */ + mpic1 = mpic_alloc(np, res.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 0, 256, " MPIC "); + of_node_put(np); + BUG_ON(mpic1 == NULL); + + mpic_init(mpic1); +} + +static void __init +sbc8641_setup_arch(void) +{ +#ifdef CONFIG_PCI + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("sbc8641_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") + fsl_add_bridge(np, 0); +#endif + + printk("SBC8641 board from Wind River\n"); + +#ifdef CONFIG_SMP + mpc86xx_smp_init(); +#endif +} + + +static void +sbc8641_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + uint memsize = total_memory; + const char *model = ""; + uint svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Wind River Systems\n"); + + root = of_find_node_by_path("/"); + if (root) + model = of_get_property(root, "model", NULL); + seq_printf(m, "Machine\t\t: %s\n", model); + of_node_put(root); + + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); +} + + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init sbc8641_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "wind,sbc8641")) + return 1; /* Looks good */ + + return 0; +} + +static long __init +mpc86xx_time_init(void) +{ + unsigned int temp; + + /* Set the time base to zero */ + mtspr(SPRN_TBWL, 0); + mtspr(SPRN_TBWU, 0); + + temp = mfspr(SPRN_HID0); + temp |= HID0_TBEN; + mtspr(SPRN_HID0, temp); + asm volatile("isync"); + + return 0; +} + +static __initdata struct of_device_id of_bus_ids[] = { + { .compatible = "simple-bus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(sbc8641, declare_of_platform_devices); + +define_machine(sbc8641) { + .name = "SBC8641D", + .probe = sbc8641_probe, + .setup_arch = sbc8641_setup_arch, + .init_IRQ = sbc8641_init_irq, + .show_cpuinfo = sbc8641_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .time_init = mpc86xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif +}; diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 7fd224ca233..6fc849e51e4 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -18,7 +18,6 @@ config MPC8XXFADS config MPC86XADS bool "MPC86XADS" select CPM1 - select PPC_CPM_NEW_BINDING help MPC86x Application Development System by Freescale Semiconductor. The MPC86xADS is meant to serve as a platform for s/w and h/w @@ -27,7 +26,6 @@ config MPC86XADS config MPC885ADS bool "MPC885ADS" select CPM1 - select PPC_CPM_NEW_BINDING help Freescale Semiconductor MPC885 Application Development System (ADS). Also known as DUET. @@ -37,7 +35,6 @@ config MPC885ADS config PPC_EP88XC bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)" select CPM1 - select PPC_CPM_NEW_BINDING help This enables support for the Embedded Planet EP88xC board. @@ -47,7 +44,6 @@ config PPC_EP88XC config PPC_ADDER875 bool "Analogue & Micro Adder 875" select CPM1 - select PPC_CPM_NEW_BINDING select REDBOOT help This enables support for the Analogue & Micro Adder 875 diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c index 184f998d1be..0d9f75c74f8 100644 --- a/arch/powerpc/platforms/8xx/m8xx_setup.c +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c @@ -111,17 +111,12 @@ void __init mpc8xx_calibrate_decr(void) /* Processor frequency is MHz. */ - ppc_tb_freq = 50000000; - if (!get_freq("bus-frequency", &ppc_tb_freq)) { - printk(KERN_ERR "WARNING: Estimating decrementer frequency " - "(not found)\n"); - } - ppc_tb_freq /= 16; ppc_proc_freq = 50000000; if (!get_freq("clock-frequency", &ppc_proc_freq)) printk(KERN_ERR "WARNING: Estimating processor frequency " "(not found)\n"); + ppc_tb_freq = ppc_proc_freq / 16; printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq); /* Perform some more timer/timebase initialization. This used diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index a578b966ecb..f38c50b4ce5 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -290,13 +290,7 @@ config CPM2 config PPC_CPM_NEW_BINDING bool depends on CPM1 || CPM2 - help - Select this if your board has been converted to use the new - device tree bindings for CPM, and no longer needs the - ioport callbacks or the platform device glue code. - - The fs_enet and cpm_uart drivers will be built as - of_platform devices. + default y config AXON_RAM tristate "Axon DDR2 memory device driver" diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 0c3face0ddb..5fc7fac10e9 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -41,11 +41,13 @@ config 40x bool "AMCC 40x" select PPC_DCR_NATIVE select PPC_UDBG_16550 + select 4xx_SOC config 44x bool "AMCC 44x" select PPC_DCR_NATIVE select PPC_UDBG_16550 + select 4xx_SOC config E200 bool "Freescale e200" diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index d75ccded7f1..45646b2b4af 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -28,13 +28,13 @@ #include <linux/notifier.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/lmb.h> #include <asm/prom.h> #include <asm/iommu.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> #include <asm/udbg.h> -#include <asm/lmb.h> #include <asm/firmware.h> #include <asm/cell-regs.h> @@ -316,7 +316,7 @@ static void cell_iommu_setup_stab(struct cbe_iommu *iommu, segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT; pr_debug("%s: iommu[%d]: segments: %lu\n", - __FUNCTION__, iommu->nid, segments); + __func__, iommu->nid, segments); /* set up the segment table */ stab_size = segments * sizeof(unsigned long); @@ -343,7 +343,7 @@ static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, (1 << 12) / sizeof(unsigned long)); ptab_size = segments * pages_per_segment * sizeof(unsigned long); - pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__, + pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __func__, iommu->nid, ptab_size, get_order(ptab_size)); page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size)); BUG_ON(!page); @@ -355,7 +355,7 @@ static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12; pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n", - __FUNCTION__, iommu->nid, iommu->stab, ptab, + __func__, iommu->nid, iommu->stab, ptab, n_pte_pages); /* initialise the STEs */ @@ -394,7 +394,7 @@ static void cell_iommu_enable_hardware(struct cbe_iommu *iommu) if (cell_iommu_find_ioc(iommu->nid, &xlate_base)) panic("%s: missing IOC register mappings for node %d\n", - __FUNCTION__, iommu->nid); + __func__, iommu->nid); iommu->xlate_regs = ioremap(xlate_base, IOC_Reg_Size); iommu->cmd_regs = iommu->xlate_regs + IOC_IOCmd_Offset; diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c index 0304589c0a8..8a3631ce912 100644 --- a/arch/powerpc/platforms/cell/pervasive.c +++ b/arch/powerpc/platforms/cell/pervasive.c @@ -65,7 +65,7 @@ static void cbe_power_save(void) break; default: printk(KERN_WARNING "%s: unknown configuration\n", - __FUNCTION__); + __func__); break; } mtspr(SPRN_TSC_CELL, thread_switch_control); diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c index e43024c0392..655704ad03c 100644 --- a/arch/powerpc/platforms/cell/ras.c +++ b/arch/powerpc/platforms/cell/ras.c @@ -132,7 +132,7 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order) (unsigned int)(addr >> 32), (unsigned int)(addr & 0xffffffff))) { printk(KERN_ERR "%s: error enabling PTCAL on node %d!\n", - __FUNCTION__, nid); + __func__, nid); goto out_free_pages; } @@ -162,7 +162,7 @@ static int __init cbe_ptcal_enable(void) if (!size) return -ENODEV; - pr_debug("%s: enabling PTCAL, size = 0x%x\n", __FUNCTION__, *size); + pr_debug("%s: enabling PTCAL, size = 0x%x\n", __func__, *size); order = get_order(*size); of_node_put(np); @@ -180,7 +180,7 @@ static int __init cbe_ptcal_enable(void) const u32 *nid = of_get_property(np, "node-id", NULL); if (!nid) { printk(KERN_ERR "%s: node %s is missing node-id?\n", - __FUNCTION__, np->full_name); + __func__, np->full_name); continue; } cbe_ptcal_enable_on_node(*nid, order); @@ -195,13 +195,13 @@ static int cbe_ptcal_disable(void) struct ptcal_area *area, *tmp; int ret = 0; - pr_debug("%s: disabling PTCAL\n", __FUNCTION__); + pr_debug("%s: disabling PTCAL\n", __func__); list_for_each_entry_safe(area, tmp, &ptcal_list, list) { /* disable ptcal on this node */ if (rtas_call(ptcal_stop_tok, 1, 1, NULL, area->nid)) { printk(KERN_ERR "%s: error disabling PTCAL " - "on node %d!\n", __FUNCTION__, + "on node %d!\n", __func__, area->nid); ret = -EIO; continue; diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 712001f6b7d..6bab44b7716 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -165,7 +165,7 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea) struct spu_slb slb; int psize; - pr_debug("%s\n", __FUNCTION__); + pr_debug("%s\n", __func__); slb.esid = (ea & ESID_MASK) | SLB_ESID_V; @@ -215,7 +215,7 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea) extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr) { - pr_debug("%s, %lx, %lx\n", __FUNCTION__, dsisr, ea); + pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea); /* Handle kernel space hash faults immediately. User hash faults need to be deferred to process context. */ @@ -351,7 +351,7 @@ spu_irq_class_1(int irq, void *data) __spu_trap_data_seg(spu, dar); spin_unlock(&spu->register_lock); - pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat, + pr_debug("%s: %lx %lx %lx %lx\n", __func__, mask, stat, dar, dsisr); if (stat & CLASS1_STORAGE_FAULT_INTR) @@ -726,7 +726,7 @@ static int __init init_spu_base(void) if (ret < 0) { printk(KERN_WARNING "%s: Error initializing spus\n", - __FUNCTION__); + __func__); goto out_unregister_sysdev_class; } diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c index dceb8b6a938..19f6bfdbb93 100644 --- a/arch/powerpc/platforms/cell/spu_callbacks.c +++ b/arch/powerpc/platforms/cell/spu_callbacks.c @@ -54,7 +54,7 @@ long spu_sys_callback(struct spu_syscall_block *s) long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6); if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) { - pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret); + pr_debug("%s: invalid syscall #%ld", __func__, s->nr_ret); return -ENOSYS; } diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c index d351bdebf5f..4c506c1463c 100644 --- a/arch/powerpc/platforms/cell/spu_manage.c +++ b/arch/powerpc/platforms/cell/spu_manage.c @@ -92,7 +92,7 @@ static int __init spu_map_interrupts_old(struct spu *spu, tmp = of_get_property(np->parent->parent, "node-id", NULL); if (!tmp) { - printk(KERN_WARNING "%s: can't find node-id\n", __FUNCTION__); + printk(KERN_WARNING "%s: can't find node-id\n", __func__); nid = spu->node; } else nid = tmp[0]; @@ -296,7 +296,7 @@ static int __init of_enumerate_spus(int (*fn)(void *data)) ret = fn(node); if (ret) { printk(KERN_WARNING "%s: Error initializing %s\n", - __FUNCTION__, node->name); + __func__, node->name); break; } n++; @@ -327,7 +327,7 @@ static int __init of_create_spu(struct spu *spu, void *data) if (!legacy_map) { legacy_map = 1; printk(KERN_WARNING "%s: Legacy device tree found, " - "trying to map old style\n", __FUNCTION__); + "trying to map old style\n", __func__); } ret = spu_map_device_old(spu); if (ret) { @@ -342,7 +342,7 @@ static int __init of_create_spu(struct spu *spu, void *data) if (!legacy_irq) { legacy_irq = 1; printk(KERN_WARNING "%s: Legacy device tree found, " - "trying old style irq\n", __FUNCTION__); + "trying old style irq\n", __func__); } ret = spu_map_interrupts_old(spu, spe); if (ret) { diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c index 0c6a96b82b2..b962c3ab470 100644 --- a/arch/powerpc/platforms/cell/spufs/coredump.c +++ b/arch/powerpc/platforms/cell/spufs/coredump.c @@ -133,8 +133,6 @@ static struct spu_context *coredump_next_context(int *fd) if (ctx->flags & SPU_CREATE_NOSCHED) continue; - /* start searching the next fd next time we're called */ - (*fd)++; break; } @@ -157,6 +155,9 @@ int spufs_coredump_extra_notes_size(void) break; size += rc; + + /* start searching the next fd next time */ + fd++; } return size; @@ -239,6 +240,9 @@ int spufs_coredump_extra_notes_write(struct file *file, loff_t *foffset) } spu_release_saved(ctx); + + /* start searching the next fd next time */ + fd++; } return 0; diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index f7a7e8635fb..08f44d1971a 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -32,7 +32,6 @@ #include <linux/marker.h> #include <asm/io.h> -#include <asm/semaphore.h> #include <asm/spu.h> #include <asm/spu_info.h> #include <asm/uaccess.h> @@ -1337,7 +1336,7 @@ static u64 spufs_signal1_type_get(struct spu_context *ctx) return ctx->ops->signal1_type_get(ctx); } DEFINE_SPUFS_ATTRIBUTE(spufs_signal1_type, spufs_signal1_type_get, - spufs_signal1_type_set, "%llu", SPU_ATTR_ACQUIRE); + spufs_signal1_type_set, "%llu\n", SPU_ATTR_ACQUIRE); static int spufs_signal2_type_set(void *data, u64 val) @@ -1359,7 +1358,7 @@ static u64 spufs_signal2_type_get(struct spu_context *ctx) return ctx->ops->signal2_type_get(ctx); } DEFINE_SPUFS_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get, - spufs_signal2_type_set, "%llu", SPU_ATTR_ACQUIRE); + spufs_signal2_type_set, "%llu\n", SPU_ATTR_ACQUIRE); #if SPUFS_MMAP_4K static unsigned long spufs_mss_mmap_nopfn(struct vm_area_struct *vma, @@ -1556,7 +1555,7 @@ void spufs_mfc_callback(struct spu *spu) wake_up_all(&ctx->mfc_wq); - pr_debug("%s %s\n", __FUNCTION__, spu->name); + pr_debug("%s %s\n", __func__, spu->name); if (ctx->mfc_fasync) { u32 free_elements, tagstatus; unsigned int mask; @@ -1790,7 +1789,7 @@ static unsigned int spufs_mfc_poll(struct file *file,poll_table *wait) if (tagstatus & ctx->tagwait) mask |= POLLIN | POLLRDNORM; - pr_debug("%s: free %d tagstatus %d tagwait %d\n", __FUNCTION__, + pr_debug("%s: free %d tagstatus %d tagwait %d\n", __func__, free_elements, tagstatus, ctx->tagwait); return mask; diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 6d1228c66c5..0c32a05ab06 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -35,7 +35,6 @@ #include <linux/parser.h> #include <asm/prom.h> -#include <asm/semaphore.h> #include <asm/spu.h> #include <asm/spu_priv1.h> #include <asm/uaccess.h> diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index cac69e11677..96bf7c2b86f 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -98,7 +98,7 @@ static int spu_setup_isolated(struct spu_context *ctx) != MFC_CNTL_PURGE_DMA_COMPLETE) { if (time_after(jiffies, timeout)) { printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n", - __FUNCTION__); + __func__); ret = -EIO; goto out; } @@ -124,7 +124,7 @@ static int spu_setup_isolated(struct spu_context *ctx) status_loading) { if (time_after(jiffies, timeout)) { printk(KERN_ERR "%s: timeout waiting for loader\n", - __FUNCTION__); + __func__); ret = -EIO; goto out_drop_priv; } @@ -134,7 +134,7 @@ static int spu_setup_isolated(struct spu_context *ctx) if (!(status & SPU_STATUS_RUNNING)) { /* If isolated LOAD has failed: run SPU, we will get a stop-and * signal later. */ - pr_debug("%s: isolated LOAD failed\n", __FUNCTION__); + pr_debug("%s: isolated LOAD failed\n", __func__); ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); ret = -EACCES; goto out_drop_priv; @@ -142,7 +142,7 @@ static int spu_setup_isolated(struct spu_context *ctx) if (!(status & SPU_STATUS_ISOLATED_STATE)) { /* This isn't allowed by the CBEA, but check anyway */ - pr_debug("%s: SPU fell out of isolated mode?\n", __FUNCTION__); + pr_debug("%s: SPU fell out of isolated mode?\n", __func__); ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP); ret = -EINVAL; goto out_drop_priv; @@ -282,7 +282,7 @@ static int spu_handle_restartsys(struct spu_context *ctx, long *spu_ret, break; default: printk(KERN_WARNING "%s: unexpected return code %ld\n", - __FUNCTION__, *spu_ret); + __func__, *spu_ret); ret = 0; } return ret; @@ -323,6 +323,10 @@ static int spu_process_callback(struct spu_context *ctx) return -EINTR; } + /* need to re-get the ls, as it may have changed when we released the + * spu */ + ls = (void __iomem *)ctx->ops->get_ls(ctx); + /* write result, jump over indirect pointer */ memcpy_toio(ls + ls_pointer, &spu_ret, sizeof(spu_ret)); ctx->ops->npc_write(ctx, npc); diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c index e9dc7a55d1b..d2a1249d36d 100644 --- a/arch/powerpc/platforms/cell/spufs/switch.c +++ b/arch/powerpc/platforms/cell/spufs/switch.c @@ -1815,6 +1815,7 @@ static void save_csa(struct spu_state *prev, struct spu *spu) save_mfc_csr_ato(prev, spu); /* Step 24. */ save_mfc_tclass_id(prev, spu); /* Step 25. */ set_mfc_tclass_id(prev, spu); /* Step 26. */ + save_mfc_cmd(prev, spu); /* Step 26a - moved from 44. */ purge_mfc_queue(prev, spu); /* Step 27. */ wait_purge_complete(prev, spu); /* Step 28. */ setup_mfc_sr1(prev, spu); /* Step 30. */ @@ -1831,7 +1832,6 @@ static void save_csa(struct spu_state *prev, struct spu *spu) save_ppuint_mb(prev, spu); /* Step 41. */ save_ch_part1(prev, spu); /* Step 42. */ save_spu_mb(prev, spu); /* Step 43. */ - save_mfc_cmd(prev, spu); /* Step 44. */ reset_ch(prev, spu); /* Step 45. */ } diff --git a/arch/powerpc/platforms/celleb/beat.c b/arch/powerpc/platforms/celleb/beat.c index 93ebb7d8512..b64b171f245 100644 --- a/arch/powerpc/platforms/celleb/beat.c +++ b/arch/powerpc/platforms/celleb/beat.c @@ -48,6 +48,7 @@ void beat_power_off(void) } u64 beat_halt_code = 0x1000000000000000UL; +EXPORT_SYMBOL(beat_halt_code); void beat_halt(void) { @@ -94,9 +95,8 @@ ssize_t beat_nvram_read(char *buf, size_t count, loff_t *index) len = count; if (len > BEAT_NVRW_CNT) len = BEAT_NVRW_CNT; - if (beat_eeprom_read(i, len, p)) { + if (beat_eeprom_read(i, len, p)) return -EIO; - } p += len; i += len; @@ -121,9 +121,8 @@ ssize_t beat_nvram_write(char *buf, size_t count, loff_t *index) len = count; if (len > BEAT_NVRW_CNT) len = BEAT_NVRW_CNT; - if (beat_eeprom_write(i, len, p)) { + if (beat_eeprom_write(i, len, p)) return -EIO; - } p += len; i += len; @@ -149,13 +148,14 @@ int64_t beat_get_term_char(u64 vterm, u64 *len, u64 *t1, u64 *t2) u64 db[2]; s64 ret; - ret = beat_get_characters_from_console(vterm, len, (u8*)db); + ret = beat_get_characters_from_console(vterm, len, (u8 *)db); if (ret == 0) { *t1 = db[0]; *t2 = db[1]; } return ret; } +EXPORT_SYMBOL(beat_get_term_char); int64_t beat_put_term_char(u64 vterm, u64 len, u64 t1, u64 t2) { @@ -163,8 +163,9 @@ int64_t beat_put_term_char(u64 vterm, u64 len, u64 t1, u64 t2) db[0] = t1; db[1] = t2; - return beat_put_characters_to_console(vterm, len, (u8*)db); + return beat_put_characters_to_console(vterm, len, (u8 *)db); } +EXPORT_SYMBOL(beat_put_term_char); void beat_power_save(void) { @@ -261,7 +262,3 @@ static int __init beat_event_init(void) } device_initcall(beat_event_init); - -EXPORT_SYMBOL(beat_get_term_char); -EXPORT_SYMBOL(beat_put_term_char); -EXPORT_SYMBOL(beat_halt_code); diff --git a/arch/powerpc/platforms/celleb/beat.h b/arch/powerpc/platforms/celleb/beat.h index ac82ac35b99..32c8efcedc8 100644 --- a/arch/powerpc/platforms/celleb/beat.h +++ b/arch/powerpc/platforms/celleb/beat.h @@ -21,8 +21,8 @@ #ifndef _CELLEB_BEAT_H #define _CELLEB_BEAT_H -int64_t beat_get_term_char(uint64_t,uint64_t*,uint64_t*,uint64_t*); -int64_t beat_put_term_char(uint64_t,uint64_t,uint64_t,uint64_t); +int64_t beat_get_term_char(uint64_t, uint64_t *, uint64_t *, uint64_t *); +int64_t beat_put_term_char(uint64_t, uint64_t, uint64_t, uint64_t); int64_t beat_repository_encode(int, const char *, uint64_t[4]); void beat_restart(char *); void beat_power_off(void); diff --git a/arch/powerpc/platforms/celleb/beat_wrapper.h b/arch/powerpc/platforms/celleb/beat_wrapper.h index cbc1487df7d..b47dfda48d0 100644 --- a/arch/powerpc/platforms/celleb/beat_wrapper.h +++ b/arch/powerpc/platforms/celleb/beat_wrapper.h @@ -197,7 +197,8 @@ static inline s64 beat_put_characters_to_console(u64 termno, u64 len, u64 b[2]; memcpy(b, buffer, len); - return beat_hcall_norets(HV_put_characters_to_console, termno, len, b[0], b[1]); + return beat_hcall_norets(HV_put_characters_to_console, termno, len, + b[0], b[1]); } static inline s64 beat_get_spe_privileged_state_1_registers( diff --git a/arch/powerpc/platforms/celleb/htab.c b/arch/powerpc/platforms/celleb/htab.c index fbf27c74ebd..81467ff055c 100644 --- a/arch/powerpc/platforms/celleb/htab.c +++ b/arch/powerpc/platforms/celleb/htab.c @@ -35,9 +35,9 @@ #include "beat_wrapper.h" #ifdef DEBUG_LOW -#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while(0) +#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while (0) #else -#define DBG_LOW(fmt...) do { } while(0) +#define DBG_LOW(fmt...) do { } while (0) #endif static DEFINE_SPINLOCK(beat_htab_lock); @@ -116,7 +116,8 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group, hpte_r &= ~_PAGE_COHERENT; spin_lock(&beat_htab_lock); - if ((lpar_rc = beat_read_mask(hpte_group)) == 0) { + lpar_rc = beat_read_mask(hpte_group); + if (lpar_rc == 0) { if (!(vflags & HPTE_V_BOLTED)) DBG_LOW(" full\n"); spin_unlock(&beat_htab_lock); diff --git a/arch/powerpc/platforms/celleb/interrupt.c b/arch/powerpc/platforms/celleb/interrupt.c index c7c68ca70c8..69562a86787 100644 --- a/arch/powerpc/platforms/celleb/interrupt.c +++ b/arch/powerpc/platforms/celleb/interrupt.c @@ -34,7 +34,7 @@ static DEFINE_SPINLOCK(beatic_irq_mask_lock); static uint64_t beatic_irq_mask_enable[(MAX_IRQS+255)/64]; static uint64_t beatic_irq_mask_ack[(MAX_IRQS+255)/64]; -static struct irq_host *beatic_host = NULL; +static struct irq_host *beatic_host; /* * In this implementation, "virq" == "IRQ plug number", @@ -49,13 +49,13 @@ static inline void beatic_update_irq_mask(unsigned int irq_plug) off = (irq_plug / 256) * 4; masks[0] = beatic_irq_mask_enable[off + 0] - & beatic_irq_mask_ack[off + 0]; + & beatic_irq_mask_ack[off + 0]; masks[1] = beatic_irq_mask_enable[off + 1] - & beatic_irq_mask_ack[off + 1]; + & beatic_irq_mask_ack[off + 1]; masks[2] = beatic_irq_mask_enable[off + 2] - & beatic_irq_mask_ack[off + 2]; + & beatic_irq_mask_ack[off + 2]; masks[3] = beatic_irq_mask_enable[off + 3] - & beatic_irq_mask_ack[off + 3]; + & beatic_irq_mask_ack[off + 3]; if (beat_set_interrupt_mask(irq_plug&~255UL, masks[0], masks[1], masks[2], masks[3]) != 0) panic("Failed to set mask IRQ!"); @@ -96,7 +96,8 @@ static void beatic_end_irq(unsigned int irq_plug) s64 err; unsigned long flags; - if ((err = beat_downcount_of_interrupt(irq_plug)) != 0) { + err = beat_downcount_of_interrupt(irq_plug); + if (err != 0) { if ((err & 0xFFFFFFFF) != 0xFFFFFFF5) /* -11: wrong state */ panic("Failed to downcount IRQ! Error = %16lx", err); @@ -138,7 +139,8 @@ static int beatic_pic_host_map(struct irq_host *h, unsigned int virq, struct irq_desc *desc = get_irq_desc(virq); int64_t err; - if ((err = beat_construct_and_connect_irq_plug(virq, hw)) < 0) + err = beat_construct_and_connect_irq_plug(virq, hw); + if (err < 0) return -EIO; desc->status |= IRQ_LEVEL; @@ -202,22 +204,22 @@ static inline unsigned int beatic_get_irq_plug(void) beat_detect_pending_interrupts(i, pending); __asm__ ("cntlzd %0,%1":"=r"(ub): "r"(pending[0] & beatic_irq_mask_enable[i/64+0] - & beatic_irq_mask_ack[i/64+0])); + & beatic_irq_mask_ack[i/64+0])); if (ub != 64) return i + ub + 0; __asm__ ("cntlzd %0,%1":"=r"(ub): "r"(pending[1] & beatic_irq_mask_enable[i/64+1] - & beatic_irq_mask_ack[i/64+1])); + & beatic_irq_mask_ack[i/64+1])); if (ub != 64) return i + ub + 64; __asm__ ("cntlzd %0,%1":"=r"(ub): "r"(pending[2] & beatic_irq_mask_enable[i/64+2] - & beatic_irq_mask_ack[i/64+2])); + & beatic_irq_mask_ack[i/64+2])); if (ub != 64) return i + ub + 128; __asm__ ("cntlzd %0,%1":"=r"(ub): "r"(pending[3] & beatic_irq_mask_enable[i/64+3] - & beatic_irq_mask_ack[i/64+3])); + & beatic_irq_mask_ack[i/64+3])); if (ub != 64) return i + ub + 192; } @@ -250,7 +252,7 @@ void __init beatic_init_IRQ(void) /* Allocate an irq host */ beatic_host = irq_alloc_host(NULL, IRQ_HOST_MAP_NOMAP, 0, - &beatic_pic_host_ops, + &beatic_pic_host_ops, 0); BUG_ON(beatic_host == NULL); irq_set_default_host(beatic_host); diff --git a/arch/powerpc/platforms/celleb/scc_epci.c b/arch/powerpc/platforms/celleb/scc_epci.c index a3c7cfbcb32..a999b393f6f 100644 --- a/arch/powerpc/platforms/celleb/scc_epci.c +++ b/arch/powerpc/platforms/celleb/scc_epci.c @@ -161,9 +161,9 @@ static PCI_IO_ADDR celleb_epci_make_config_addr( if (bus != hose->bus) addr = celleb_epci_get_epci_cfg(hose) + (((bus->number & 0xff) << 16) - | ((devfn & 0xff) << 8) - | (where & 0xff) - | 0x01000000); + | ((devfn & 0xff) << 8) + | (where & 0xff) + | 0x01000000); else addr = celleb_epci_get_epci_cfg(hose) + (((devfn & 0xff) << 8) | (where & 0xff)); @@ -174,7 +174,7 @@ static PCI_IO_ADDR celleb_epci_make_config_addr( } static int celleb_epci_read_config(struct pci_bus *bus, - unsigned int devfn, int where, int size, u32 * val) + unsigned int devfn, int where, int size, u32 *val) { PCI_IO_ADDR epci_base; PCI_IO_ADDR addr; diff --git a/arch/powerpc/platforms/celleb/scc_sio.c b/arch/powerpc/platforms/celleb/scc_sio.c index 610008211ca..3a16c5b3c46 100644 --- a/arch/powerpc/platforms/celleb/scc_sio.c +++ b/arch/powerpc/platforms/celleb/scc_sio.c @@ -28,7 +28,7 @@ /* sio irq0=0xb00010022 irq0=0xb00010023 irq2=0xb00010024 mmio=0xfff000-0x1000,0xff2000-0x1000 */ -static int txx9_serial_bitmap __initdata = 0; +static int txx9_serial_bitmap __initdata; static struct { uint32_t offset; @@ -84,7 +84,7 @@ static int __init txx9_serial_config(char *ptr) int i; for (;;) { - switch(get_option(&ptr, &i)) { + switch (get_option(&ptr, &i)) { default: return 0; case 2: diff --git a/arch/powerpc/platforms/celleb/spu_priv1.c b/arch/powerpc/platforms/celleb/spu_priv1.c index 2bf6700f747..bcc17f7fe8a 100644 --- a/arch/powerpc/platforms/celleb/spu_priv1.c +++ b/arch/powerpc/platforms/celleb/spu_priv1.c @@ -183,8 +183,7 @@ static u64 resource_allocation_enable_get(struct spu *spu) return enable; } -const struct spu_priv1_ops spu_priv1_beat_ops = -{ +const struct spu_priv1_ops spu_priv1_beat_ops = { .int_mask_and = int_mask_and, .int_mask_or = int_mask_or, .int_mask_set = int_mask_set, diff --git a/arch/powerpc/platforms/celleb/udbg_beat.c b/arch/powerpc/platforms/celleb/udbg_beat.c index d888c4674c6..6b418f6b617 100644 --- a/arch/powerpc/platforms/celleb/udbg_beat.c +++ b/arch/powerpc/platforms/celleb/udbg_beat.c @@ -54,7 +54,8 @@ static int udbg_getc_poll_beat(void) if (inbuflen == 0) { /* get some more chars. */ inbuflen = 0; - rc = beat_get_term_char(celleb_vtermno, &inbuflen, inbuf+0, inbuf+1); + rc = beat_get_term_char(celleb_vtermno, &inbuflen, + inbuf+0, inbuf+1); if (rc != 0) inbuflen = 0; /* otherwise inbuflen is garbage */ } @@ -78,7 +79,7 @@ static int udbg_getc_beat(void) if (ch == -1) { /* This shouldn't be needed...but... */ volatile unsigned long delay; - for (delay=0; delay < 2000000; delay++) + for (delay = 0; delay < 2000000; delay++) ; } else { return ch; diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index d4f8bf581e3..84e2d78b9a6 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -117,11 +117,11 @@ static void __init mpc7448_hpc2_init_IRQ(void) } if (mpic_paddr == 0) { - printk("%s: No tsi108 PIC found !\n", __FUNCTION__); + printk("%s: No tsi108 PIC found !\n", __func__); return; } - DBG("%s: tsi108 pic phys_addr = 0x%x\n", __FUNCTION__, + DBG("%s: tsi108 pic phys_addr = 0x%x\n", __func__, (u32) mpic_paddr); mpic = mpic_alloc(tsi_pic, mpic_paddr, @@ -140,17 +140,17 @@ static void __init mpc7448_hpc2_init_IRQ(void) #ifdef CONFIG_PCI tsi_pci = of_find_node_by_type(NULL, "pci"); if (tsi_pci == NULL) { - printk("%s: No tsi108 pci node found !\n", __FUNCTION__); + printk("%s: No tsi108 pci node found !\n", __func__); return; } cascade_node = of_find_node_by_type(NULL, "pic-router"); if (cascade_node == NULL) { - printk("%s: No tsi108 pci cascade node found !\n", __FUNCTION__); + printk("%s: No tsi108 pci cascade node found !\n", __func__); return; } cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); - DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __FUNCTION__, + DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, (u32) cascade_pci_irq); tsi108_pci_int_init(cascade_node); set_irq_data(cascade_pci_irq, mpic); diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c index 653a5eb91c9..5a19b9a1457 100644 --- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c +++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c @@ -49,13 +49,13 @@ static void __init prpmc2800_setup_arch(void) * ioremap mpp and gpp registers in case they are later * needed by prpmc2800_reset_board(). */ - np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-mpp"); + np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp"); reg = of_get_property(np, "reg", NULL); paddr = of_translate_address(np, reg); of_node_put(np); mv64x60_mpp_reg_base = ioremap(paddr, reg[1]); - np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp"); + np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp"); reg = of_get_property(np, "reg", NULL); paddr = of_translate_address(np, reg); of_node_put(np); diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S index 5381038f088..c775cd4b3d6 100644 --- a/arch/powerpc/platforms/iseries/exception.S +++ b/arch/powerpc/platforms/iseries/exception.S @@ -38,11 +38,19 @@ .globl system_reset_iSeries system_reset_iSeries: - mfspr r13,SPRN_SPRG3 /* Get paca address */ + mfspr r13,SPRN_SPRG3 /* Get alpaca address */ + LOAD_REG_IMMEDIATE(r23, alpaca) + li r0,ALPACA_SIZE + sub r23,r13,r23 + divdu r23,r23,r0 /* r23 has cpu number */ + LOAD_REG_IMMEDIATE(r13, paca) + mulli r0,r23,PACA_SIZE + add r13,r13,r0 + mtspr SPRN_SPRG3,r13 /* Save it away for the future */ mfmsr r24 ori r24,r24,MSR_RI mtmsrd r24 /* RI on */ - lhz r24,PACAPACAINDEX(r13) /* Get processor # */ + mr r24,r23 cmpwi 0,r24,0 /* Are we processor 0? */ bne 1f b .__start_initialization_iSeries /* Start up the first processor */ diff --git a/arch/powerpc/platforms/iseries/ipl_parms.h b/arch/powerpc/platforms/iseries/ipl_parms.h index 77c135ddbf1..83e4ca42fc5 100644 --- a/arch/powerpc/platforms/iseries/ipl_parms.h +++ b/arch/powerpc/platforms/iseries/ipl_parms.h @@ -65,6 +65,4 @@ struct ItIplParmsReal { u64 xRsvd13; // Reserved x38-x3F }; -extern struct ItIplParmsReal xItIplParmsReal; - #endif /* _ISERIES_IPL_PARMS_H */ diff --git a/arch/powerpc/platforms/iseries/lpardata.c b/arch/powerpc/platforms/iseries/lpardata.c index 8162049bb04..98bd2d37038 100644 --- a/arch/powerpc/platforms/iseries/lpardata.c +++ b/arch/powerpc/platforms/iseries/lpardata.c @@ -14,10 +14,10 @@ #include <asm/ptrace.h> #include <asm/abs_addr.h> #include <asm/lppaca.h> -#include <asm/iseries/it_lp_reg_save.h> #include <asm/paca.h> #include <asm/iseries/lpar_map.h> #include <asm/iseries/it_lp_queue.h> +#include <asm/iseries/alpaca.h> #include "naca.h" #include "vpd_areas.h" @@ -31,7 +31,7 @@ /* The HvReleaseData is the root of the information shared between * the hypervisor and Linux. */ -struct HvReleaseData hvReleaseData = { +const struct HvReleaseData hvReleaseData = { .xDesc = 0xc8a5d9c4, /* "HvRD" ebcdic */ .xSize = sizeof(struct HvReleaseData), .xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas), @@ -61,6 +61,63 @@ struct naca_struct naca = { .xRamDiskSize = 0, }; +struct ItLpRegSave { + u32 xDesc; // Eye catcher "LpRS" ebcdic 000-003 + u16 xSize; // Size of this class 004-005 + u8 xInUse; // Area is live 006-007 + u8 xRsvd1[9]; // Reserved 007-00F + + u8 xFixedRegSave[352]; // Fixed Register Save Area 010-16F + u32 xCTRL; // Control Register 170-173 + u32 xDEC; // Decrementer 174-177 + u32 xFPSCR; // FP Status and Control Reg 178-17B + u32 xPVR; // Processor Version Number 17C-17F + + u64 xMMCR0; // Monitor Mode Control Reg 0 180-187 + u32 xPMC1; // Perf Monitor Counter 1 188-18B + u32 xPMC2; // Perf Monitor Counter 2 18C-18F + u32 xPMC3; // Perf Monitor Counter 3 190-193 + u32 xPMC4; // Perf Monitor Counter 4 194-197 + u32 xPIR; // Processor ID Reg 198-19B + + u32 xMMCR1; // Monitor Mode Control Reg 1 19C-19F + u32 xMMCRA; // Monitor Mode Control Reg A 1A0-1A3 + u32 xPMC5; // Perf Monitor Counter 5 1A4-1A7 + u32 xPMC6; // Perf Monitor Counter 6 1A8-1AB + u32 xPMC7; // Perf Monitor Counter 7 1AC-1AF + u32 xPMC8; // Perf Monitor Counter 8 1B0-1B3 + u32 xTSC; // Thread Switch Control 1B4-1B7 + u32 xTST; // Thread Switch Timeout 1B8-1BB + u32 xRsvd; // Reserved 1BC-1BF + + u64 xACCR; // Address Compare Control Reg 1C0-1C7 + u64 xIMR; // Instruction Match Register 1C8-1CF + u64 xSDR1; // Storage Description Reg 1 1D0-1D7 + u64 xSPRG0; // Special Purpose Reg General0 1D8-1DF + u64 xSPRG1; // Special Purpose Reg General1 1E0-1E7 + u64 xSPRG2; // Special Purpose Reg General2 1E8-1EF + u64 xSPRG3; // Special Purpose Reg General3 1F0-1F7 + u64 xTB; // Time Base Register 1F8-1FF + + u64 xFPR[32]; // Floating Point Registers 200-2FF + + u64 xMSR; // Machine State Register 300-307 + u64 xNIA; // Next Instruction Address 308-30F + + u64 xDABR; // Data Address Breakpoint Reg 310-317 + u64 xIABR; // Inst Address Breakpoint Reg 318-31F + + u64 xHID0; // HW Implementation Dependent0 320-327 + + u64 xHID4; // HW Implementation Dependent4 328-32F + u64 xSCOMd; // SCON Data Reg (SPRG4) 330-337 + u64 xSCOMc; // SCON Command Reg (SPRG5) 338-33F + u64 xSDAR; // Sample Data Address Register 340-347 + u64 xSIAR; // Sample Inst Address Register 348-34F + + u8 xRsvd3[176]; // Reserved 350-3FF +}; + extern void system_reset_iSeries(void); extern void machine_check_iSeries(void); extern void data_access_iSeries(void); @@ -129,7 +186,7 @@ struct ItLpNaca itLpNaca = { }; /* May be filled in by the hypervisor so cannot end up in the BSS */ -struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data"))); +static struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data"))); /* May be filled in by the hypervisor so cannot end up in the BSS */ struct ItExtVpdPanel xItExtVpdPanel __attribute__((__section__(".data"))); @@ -152,13 +209,54 @@ u64 xMsVpd[3400] __attribute__((__section__(".data"))); /* Space for Recovery Log Buffer */ /* May be filled in by the hypervisor so cannot end up in the BSS */ -u64 xRecoveryLogBuffer[32] __attribute__((__section__(".data"))); +static u64 xRecoveryLogBuffer[32] __attribute__((__section__(".data"))); -struct SpCommArea xSpCommArea = { +static const struct SpCommArea xSpCommArea = { .xDesc = 0xE2D7C3C2, .xFormat = 1, }; +static const struct ItLpRegSave iseries_reg_save[] = { + [0 ... (NR_CPUS-1)] = { + .xDesc = 0xd397d9e2, /* "LpRS" */ + .xSize = sizeof(struct ItLpRegSave), + }, +}; + +#define ALPACA_INIT(number) \ +{ \ + .lppaca_ptr = &lppaca[number], \ + .reg_save_ptr = &iseries_reg_save[number], \ +} + +const struct alpaca alpaca[] = { + ALPACA_INIT( 0), +#if NR_CPUS > 1 + ALPACA_INIT( 1), ALPACA_INIT( 2), ALPACA_INIT( 3), +#if NR_CPUS > 4 + ALPACA_INIT( 4), ALPACA_INIT( 5), ALPACA_INIT( 6), ALPACA_INIT( 7), +#if NR_CPUS > 8 + ALPACA_INIT( 8), ALPACA_INIT( 9), ALPACA_INIT(10), ALPACA_INIT(11), + ALPACA_INIT(12), ALPACA_INIT(13), ALPACA_INIT(14), ALPACA_INIT(15), + ALPACA_INIT(16), ALPACA_INIT(17), ALPACA_INIT(18), ALPACA_INIT(19), + ALPACA_INIT(20), ALPACA_INIT(21), ALPACA_INIT(22), ALPACA_INIT(23), + ALPACA_INIT(24), ALPACA_INIT(25), ALPACA_INIT(26), ALPACA_INIT(27), + ALPACA_INIT(28), ALPACA_INIT(29), ALPACA_INIT(30), ALPACA_INIT(31), +#if NR_CPUS > 32 + ALPACA_INIT(32), ALPACA_INIT(33), ALPACA_INIT(34), ALPACA_INIT(35), + ALPACA_INIT(36), ALPACA_INIT(37), ALPACA_INIT(38), ALPACA_INIT(39), + ALPACA_INIT(40), ALPACA_INIT(41), ALPACA_INIT(42), ALPACA_INIT(43), + ALPACA_INIT(44), ALPACA_INIT(45), ALPACA_INIT(46), ALPACA_INIT(47), + ALPACA_INIT(48), ALPACA_INIT(49), ALPACA_INIT(50), ALPACA_INIT(51), + ALPACA_INIT(52), ALPACA_INIT(53), ALPACA_INIT(54), ALPACA_INIT(55), + ALPACA_INIT(56), ALPACA_INIT(57), ALPACA_INIT(58), ALPACA_INIT(59), + ALPACA_INIT(60), ALPACA_INIT(61), ALPACA_INIT(62), ALPACA_INIT(63), +#endif +#endif +#endif +#endif +}; + /* The LparMap data is now located at offset 0x6000 in head.S * It was put there so that the HvReleaseData could address it * with a 32-bit offset as required by the iSeries hypervisor @@ -167,7 +265,7 @@ struct SpCommArea xSpCommArea = { * the Naca via the HvReleaseData area. The HvReleaseData has the * offset into the Naca of the pointer to the ItVpdAreas. */ -struct ItVpdAreas itVpdAreas = { +const struct ItVpdAreas itVpdAreas = { .xSlicDesc = 0xc9a3e5c1, /* "ItVA" */ .xSlicSize = sizeof(struct ItVpdAreas), .xSlicVpdEntries = ItVpdMaxEntries, /* # VPD array entries */ @@ -185,7 +283,7 @@ struct ItVpdAreas itVpdAreas = { .xSlicVpdLens = { /* VPD lengths */ 0,0,0, /* 0 - 2 */ sizeof(xItExtVpdPanel), /* 3 Extended VPD */ - sizeof(struct paca_struct), /* 4 length of Paca */ + sizeof(struct alpaca), /* 4 length of (fake) Paca */ 0, /* 5 */ sizeof(struct ItIplParmsReal),/* 6 length of IPL parms */ 26992, /* 7 length of MS VPD */ @@ -203,7 +301,7 @@ struct ItVpdAreas itVpdAreas = { .xSlicVpdAdrs = { /* VPD addresses */ 0,0,0, /* 0 - 2 */ &xItExtVpdPanel, /* 3 Extended VPD */ - &paca[0], /* 4 first Paca */ + &alpaca[0], /* 4 first (fake) Paca */ 0, /* 5 */ &xItIplParmsReal, /* 6 IPL parms */ &xMsVpd, /* 7 MS Vpd */ @@ -219,10 +317,3 @@ struct ItVpdAreas itVpdAreas = { 0,0 } }; - -struct ItLpRegSave iseries_reg_save[] = { - [0 ... (NR_CPUS-1)] = { - .xDesc = 0xd397d9e2, /* "LpRS" */ - .xSize = sizeof(struct ItLpRegSave), - }, -}; diff --git a/arch/powerpc/platforms/iseries/naca.h b/arch/powerpc/platforms/iseries/naca.h index ab2372eb8d2..f01708e1286 100644 --- a/arch/powerpc/platforms/iseries/naca.h +++ b/arch/powerpc/platforms/iseries/naca.h @@ -14,7 +14,7 @@ struct naca_struct { /* Kernel only data - undefined for user space */ - void *xItVpdAreas; /* VPD Data 0x00 */ + const void *xItVpdAreas; /* VPD Data 0x00 */ void *xRamDisk; /* iSeries ramdisk 0x08 */ u64 xRamDiskSize; /* In pages 0x10 */ }; diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index cc562e4c2f3..02a634faedb 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -23,6 +23,7 @@ #undef DEBUG +#include <linux/jiffies.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/string.h> @@ -586,7 +587,7 @@ static inline struct device_node *xlate_iomm_address( static unsigned long last_jiffies; static int num_printed; - if ((jiffies - last_jiffies) > 60 * HZ) { + if (time_after(jiffies, last_jiffies + 60 * HZ)) { last_jiffies = jiffies; num_printed = 0; } diff --git a/arch/powerpc/platforms/iseries/release_data.h b/arch/powerpc/platforms/iseries/release_data.h index 66189fd2e32..6ad7d843e8f 100644 --- a/arch/powerpc/platforms/iseries/release_data.h +++ b/arch/powerpc/platforms/iseries/release_data.h @@ -58,6 +58,6 @@ struct HvReleaseData { char xRsvd3[20]; /* Reserved x2C-x3F */ }; -extern struct HvReleaseData hvReleaseData; +extern const struct HvReleaseData hvReleaseData; #endif /* _ISERIES_RELEASE_DATA_H */ diff --git a/arch/powerpc/platforms/iseries/spcomm_area.h b/arch/powerpc/platforms/iseries/spcomm_area.h index 6e3b685115c..598b7c14573 100644 --- a/arch/powerpc/platforms/iseries/spcomm_area.h +++ b/arch/powerpc/platforms/iseries/spcomm_area.h @@ -31,6 +31,4 @@ struct SpCommArea { u8 xRsvd2[80]; // Reserved 030-07F }; -extern struct SpCommArea xSpCommArea; - #endif /* _ISERIES_SPCOMM_AREA_H */ diff --git a/arch/powerpc/platforms/iseries/vpd_areas.h b/arch/powerpc/platforms/iseries/vpd_areas.h index 601e6dd860e..feb001f3a5f 100644 --- a/arch/powerpc/platforms/iseries/vpd_areas.h +++ b/arch/powerpc/platforms/iseries/vpd_areas.h @@ -80,9 +80,9 @@ struct ItVpdAreas { u32 xPlicDmaLens[ItDmaMaxEntries];// Array of DMA lengths 080-0A7 u32 xPlicDmaToks[ItDmaMaxEntries];// Array of DMA tokens 0A8-0CF u32 xSlicVpdLens[ItVpdMaxEntries];// Array of VPD lengths 0D0-12F - void *xSlicVpdAdrs[ItVpdMaxEntries];// Array of VPD buffers 130-1EF + const void *xSlicVpdAdrs[ItVpdMaxEntries];// Array of VPD buffers 130-1EF }; -extern struct ItVpdAreas itVpdAreas; +extern const struct ItVpdAreas itVpdAreas; #endif /* _ISERIES_VPD_AREAS_H */ diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 3ffa0ac170e..301855263b8 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -592,50 +592,3 @@ int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) } return irq; } - -/* XXX: To remove once all firmwares are ok */ -static void fixup_maple_ide(struct pci_dev* dev) -{ - if (!machine_is(maple)) - return; - -#if 0 /* Enable this to enable IDE port 0 */ - { - u8 v; - - pci_read_config_byte(dev, 0x40, &v); - v |= 2; - pci_write_config_byte(dev, 0x40, v); - } -#endif -#if 0 /* fix bus master base */ - pci_write_config_dword(dev, 0x20, 0xcc01); - printk("old ide resource: %lx -> %lx \n", - dev->resource[4].start, dev->resource[4].end); - dev->resource[4].start = 0xcc00; - dev->resource[4].end = 0xcc10; -#endif -#if 0 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */ - { - struct pci_dev *apicdev; - u32 v; - - apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0)); - if (apicdev == NULL) - printk("IDE Fixup IRQ: Can't find IO-APIC !\n"); - else { - pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14); - pci_read_config_dword(apicdev, 0xf4, &v); - v &= ~0x00000022; - pci_write_config_dword(apicdev, 0xf4, v); - pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15); - pci_read_config_dword(apicdev, 0xf4, &v); - v &= ~0x00000022; - pci_write_config_dword(apicdev, 0xf4, v); - pci_dev_put(apicdev); - } - } -#endif -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE, - fixup_maple_ide); diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index 3ce2d73b417..364714757cf 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -43,6 +43,7 @@ #include <linux/smp.h> #include <linux/bitops.h> #include <linux/of_device.h> +#include <linux/lmb.h> #include <asm/processor.h> #include <asm/sections.h> @@ -57,7 +58,6 @@ #include <asm/dma.h> #include <asm/cputable.h> #include <asm/time.h> -#include <asm/lmb.h> #include <asm/mpic.h> #include <asm/rtas.h> #include <asm/udbg.h> @@ -319,7 +319,7 @@ static int __init maple_probe(void) return 1; } -define_machine(maple_md) { +define_machine(maple) { .name = "Maple", .probe = maple_probe, .setup_arch = maple_setup_arch, diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c index c529d8dff39..217af321b0c 100644 --- a/arch/powerpc/platforms/pasemi/dma_lib.c +++ b/arch/powerpc/platforms/pasemi/dma_lib.c @@ -17,6 +17,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> #include <linux/pci.h> @@ -26,6 +27,8 @@ #define MAX_TXCH 64 #define MAX_RXCH 64 +#define MAX_FLAGS 64 +#define MAX_FUN 8 static struct pasdma_status *dma_status; @@ -43,6 +46,8 @@ static struct pci_dev *dma_pdev; static DECLARE_BITMAP(txch_free, MAX_TXCH); static DECLARE_BITMAP(rxch_free, MAX_RXCH); +static DECLARE_BITMAP(flags_free, MAX_FLAGS); +static DECLARE_BITMAP(fun_free, MAX_FUN); /* pasemi_read_iob_reg - read IOB register * @reg: Register to read (offset into PCI CFG space) @@ -373,6 +378,106 @@ void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size, } EXPORT_SYMBOL(pasemi_dma_free_buf); +/* pasemi_dma_alloc_flag - Allocate a flag (event) for channel syncronization + * + * Allocates a flag for use with channel syncronization (event descriptors). + * Returns allocated flag (0-63), < 0 on error. + */ +int pasemi_dma_alloc_flag(void) +{ + int bit; + +retry: + bit = find_next_bit(flags_free, MAX_FLAGS, 0); + if (bit >= MAX_FLAGS) + return -ENOSPC; + if (!test_and_clear_bit(bit, flags_free)) + goto retry; + + return bit; +} +EXPORT_SYMBOL(pasemi_dma_alloc_flag); + + +/* pasemi_dma_free_flag - Deallocates a flag (event) + * @flag: Flag number to deallocate + * + * Frees up a flag so it can be reused for other purposes. + */ +void pasemi_dma_free_flag(int flag) +{ + BUG_ON(test_bit(flag, flags_free)); + BUG_ON(flag >= MAX_FLAGS); + set_bit(flag, flags_free); +} +EXPORT_SYMBOL(pasemi_dma_free_flag); + + +/* pasemi_dma_set_flag - Sets a flag (event) to 1 + * @flag: Flag number to set active + * + * Sets the flag provided to 1. + */ +void pasemi_dma_set_flag(int flag) +{ + BUG_ON(flag >= MAX_FLAGS); + if (flag < 32) + pasemi_write_dma_reg(PAS_DMA_TXF_SFLG0, 1 << flag); + else + pasemi_write_dma_reg(PAS_DMA_TXF_SFLG1, 1 << flag); +} +EXPORT_SYMBOL(pasemi_dma_set_flag); + +/* pasemi_dma_clear_flag - Sets a flag (event) to 0 + * @flag: Flag number to set inactive + * + * Sets the flag provided to 0. + */ +void pasemi_dma_clear_flag(int flag) +{ + BUG_ON(flag >= MAX_FLAGS); + if (flag < 32) + pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 1 << flag); + else + pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 1 << flag); +} +EXPORT_SYMBOL(pasemi_dma_clear_flag); + +/* pasemi_dma_alloc_fun - Allocate a function engine + * + * Allocates a function engine to use for crypto/checksum offload + * Returns allocated engine (0-8), < 0 on error. + */ +int pasemi_dma_alloc_fun(void) +{ + int bit; + +retry: + bit = find_next_bit(fun_free, MAX_FLAGS, 0); + if (bit >= MAX_FLAGS) + return -ENOSPC; + if (!test_and_clear_bit(bit, fun_free)) + goto retry; + + return bit; +} +EXPORT_SYMBOL(pasemi_dma_alloc_fun); + + +/* pasemi_dma_free_fun - Deallocates a function engine + * @flag: Engine number to deallocate + * + * Frees up a function engine so it can be used for other purposes. + */ +void pasemi_dma_free_fun(int fun) +{ + BUG_ON(test_bit(fun, fun_free)); + BUG_ON(fun >= MAX_FLAGS); + set_bit(fun, fun_free); +} +EXPORT_SYMBOL(pasemi_dma_free_fun); + + static void *map_onedev(struct pci_dev *p, int index) { struct device_node *dn; @@ -410,6 +515,7 @@ int pasemi_dma_init(void) struct resource res; struct device_node *dn; int i, intf, err = 0; + unsigned long timeout; u32 tmp; if (!machine_is(pasemi)) @@ -478,6 +584,44 @@ int pasemi_dma_init(void) for (i = 0; i < MAX_RXCH; i++) __set_bit(i, rxch_free); + timeout = jiffies + HZ; + pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0); + while (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1) { + if (time_after(jiffies, timeout)) { + pr_warning("Warning: Could not disable RX section\n"); + break; + } + } + + timeout = jiffies + HZ; + pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0); + while (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1) { + if (time_after(jiffies, timeout)) { + pr_warning("Warning: Could not disable TX section\n"); + break; + } + } + + /* setup resource allocations for the different DMA sections */ + tmp = pasemi_read_dma_reg(PAS_DMA_COM_CFG); + pasemi_write_dma_reg(PAS_DMA_COM_CFG, tmp | 0x18000000); + + /* enable tx section */ + pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN); + + /* enable rx section */ + pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN); + + for (i = 0; i < MAX_FLAGS; i++) + __set_bit(i, flags_free); + + for (i = 0; i < MAX_FUN; i++) + __set_bit(i, fun_free); + + /* clear all status flags */ + pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 0xffffffff); + pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 0xffffffff); + printk(KERN_INFO "PA Semi PWRficient DMA library initialized " "(%d tx, %d rx channels)\n", num_txch, num_rxch); diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c index 5803f11c77f..86967bdd877 100644 --- a/arch/powerpc/platforms/pasemi/iommu.c +++ b/arch/powerpc/platforms/pasemi/iommu.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2005-2007, PA Semi, Inc + * Copyright (C) 2005-2008, PA Semi, Inc * * Maintained by: Olof Johansson <olof@lixom.net> * @@ -27,7 +27,6 @@ #include <asm/abs_addr.h> #include <asm/firmware.h> - #define IOBMAP_PAGE_SHIFT 12 #define IOBMAP_PAGE_SIZE (1 << IOBMAP_PAGE_SHIFT) #define IOBMAP_PAGE_MASK (IOBMAP_PAGE_SIZE - 1) @@ -35,13 +34,13 @@ #define IOB_BASE 0xe0000000 #define IOB_SIZE 0x3000 /* Configuration registers */ -#define IOBCAP_REG 0x10 -#define IOBCOM_REG 0x40 +#define IOBCAP_REG 0x40 +#define IOBCOM_REG 0x100 /* Enable IOB address translation */ #define IOBCOM_ATEN 0x00000100 /* Address decode configuration register */ -#define IOB_AD_REG 0x53 +#define IOB_AD_REG 0x14c /* IOBCOM_AD_REG fields */ #define IOB_AD_VGPRT 0x00000e00 #define IOB_AD_VGAEN 0x00000100 @@ -56,13 +55,13 @@ #define IOB_AD_TRNG_2G 0x00000001 #define IOB_AD_TRNG_128G 0x00000003 -#define IOB_TABLEBASE_REG 0x55 +#define IOB_TABLEBASE_REG 0x154 /* Base of the 64 4-byte L1 registers */ -#define IOB_XLT_L1_REGBASE 0xac0 +#define IOB_XLT_L1_REGBASE 0x2b00 /* Register to invalidate TLB entries */ -#define IOB_AT_INVAL_TLB_REG 0xb40 +#define IOB_AT_INVAL_TLB_REG 0x2d00 /* The top two bits of the level 1 entry contains valid and type flags */ #define IOBMAP_L1E_V 0x40000000 @@ -76,7 +75,7 @@ #define IOBMAP_L2E_V 0x80000000 #define IOBMAP_L2E_V_CACHED 0xc0000000 -static u32 __iomem *iob; +static void __iomem *iob; static u32 iob_l1_emptyval; static u32 iob_l2_emptyval; static u32 *iob_l2_base; @@ -219,7 +218,7 @@ int __init iob_init(struct device_node *dn) for (i = 0; i < 64; i++) { /* Each L1 covers 32MB, i.e. 8K entries = 32K of ram */ regword = IOBMAP_L1E_V | (__pa(iob_l2_base + i*0x2000) >> 12); - out_le32(iob+IOB_XLT_L1_REGBASE+i, regword); + out_le32(iob+IOB_XLT_L1_REGBASE+i*4, regword); } /* set 2GB translation window, based at 0 */ diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c index 85434231ae1..96d5ce50364 100644 --- a/arch/powerpc/platforms/powermac/pfunc_core.c +++ b/arch/powerpc/platforms/powermac/pfunc_core.c @@ -12,7 +12,6 @@ #include <linux/module.h> #include <linux/mutex.h> -#include <asm/semaphore.h> #include <asm/prom.h> #include <asm/pmac_pfunc.h> diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 2693fc371ea..bf44c5441a3 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -53,6 +53,7 @@ #include <linux/suspend.h> #include <linux/of_device.h> #include <linux/of_platform.h> +#include <linux/lmb.h> #include <asm/reg.h> #include <asm/sections.h> @@ -74,7 +75,6 @@ #include <asm/iommu.h> #include <asm/smu.h> #include <asm/pmc.h> -#include <asm/lmb.h> #include <asm/udbg.h> #include "pmac.h" diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c index 9d251d0ca8c..3866debfa3c 100644 --- a/arch/powerpc/platforms/ps3/device-init.c +++ b/arch/powerpc/platforms/ps3/device-init.c @@ -499,41 +499,14 @@ static int __init ps3_register_graphics_devices(void) } /** - * ps3_register_repository_device - Register a device from the repositiory info. - * + * ps3_setup_dynamic_device - Setup a dynamic device from the repository */ -static int ps3_register_repository_device( - const struct ps3_repository_device *repo) +static int ps3_setup_dynamic_device(const struct ps3_repository_device *repo) { int result; switch (repo->dev_type) { - case PS3_DEV_TYPE_SB_GELIC: - result = ps3_setup_gelic_device(repo); - if (result) { - pr_debug("%s:%d ps3_setup_gelic_device failed\n", - __func__, __LINE__); - } - break; - case PS3_DEV_TYPE_SB_USB: - - /* Each USB device has both an EHCI and an OHCI HC */ - - result = ps3_setup_ehci_device(repo); - - if (result) { - pr_debug("%s:%d ps3_setup_ehci_device failed\n", - __func__, __LINE__); - } - - result = ps3_setup_ohci_device(repo); - - if (result) { - pr_debug("%s:%d ps3_setup_ohci_device failed\n", - __func__, __LINE__); - } - break; case PS3_DEV_TYPE_STOR_DISK: result = ps3_setup_storage_dev(repo, PS3_MATCH_ID_STOR_DISK); @@ -572,6 +545,48 @@ static int ps3_register_repository_device( return result; } +/** + * ps3_setup_static_device - Setup a static device from the repository + */ + +static int __init ps3_setup_static_device(const struct ps3_repository_device *repo) +{ + int result; + + switch (repo->dev_type) { + case PS3_DEV_TYPE_SB_GELIC: + result = ps3_setup_gelic_device(repo); + if (result) { + pr_debug("%s:%d ps3_setup_gelic_device failed\n", + __func__, __LINE__); + } + break; + case PS3_DEV_TYPE_SB_USB: + + /* Each USB device has both an EHCI and an OHCI HC */ + + result = ps3_setup_ehci_device(repo); + + if (result) { + pr_debug("%s:%d ps3_setup_ehci_device failed\n", + __func__, __LINE__); + } + + result = ps3_setup_ohci_device(repo); + + if (result) { + pr_debug("%s:%d ps3_setup_ohci_device failed\n", + __func__, __LINE__); + } + break; + + default: + return ps3_setup_dynamic_device(repo); + } + + return result; +} + static void ps3_find_and_add_device(u64 bus_id, u64 dev_id) { struct ps3_repository_device repo; @@ -601,7 +616,7 @@ found: pr_debug("%s:%u: device %lu:%lu found after %u retries\n", __func__, __LINE__, bus_id, dev_id, retries); - ps3_register_repository_device(&repo); + ps3_setup_dynamic_device(&repo); return; } @@ -905,8 +920,7 @@ static int __init ps3_register_devices(void) ps3_register_graphics_devices(); - ps3_repository_find_devices(PS3_BUS_TYPE_SB, - ps3_register_repository_device); + ps3_repository_find_devices(PS3_BUS_TYPE_SB, ps3_setup_static_device); ps3_register_sound_devices(); diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c index 7382f195c4f..1cf901fa903 100644 --- a/arch/powerpc/platforms/ps3/htab.c +++ b/arch/powerpc/platforms/ps3/htab.c @@ -19,9 +19,10 @@ */ #include <linux/kernel.h> +#include <linux/lmb.h> #include <asm/machdep.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/udbg.h> #include <asm/lv1call.h> #include <asm/ps3fb.h> diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 3a6db04aa94..a14e5cdc2fe 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -709,7 +709,7 @@ static unsigned int ps3_get_irq(void) asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x)); plug &= 0x3f; - if (unlikely(plug) == NO_IRQ) { + if (unlikely(plug == NO_IRQ)) { pr_debug("%s:%d: no plug found: thread_id %lu\n", __func__, __LINE__, pd->thread_id); dump_bmp(&per_cpu(ps3_private, 0)); diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c index 68900476c84..5b3fb2b321a 100644 --- a/arch/powerpc/platforms/ps3/mm.c +++ b/arch/powerpc/platforms/ps3/mm.c @@ -21,9 +21,10 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/memory_hotplug.h> +#include <linux/lmb.h> #include <asm/firmware.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include <asm/udbg.h> #include <asm/lv1call.h> diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c index b9ea09d9d2f..c73379ec914 100644 --- a/arch/powerpc/platforms/ps3/os-area.c +++ b/arch/powerpc/platforms/ps3/os-area.c @@ -24,8 +24,9 @@ #include <linux/fs.h> #include <linux/syscalls.h> #include <linux/ctype.h> +#include <linux/lmb.h> -#include <asm/lmb.h> +#include <asm/prom.h> #include "platform.h" diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c index 5c2cbb08eb5..a413abbd412 100644 --- a/arch/powerpc/platforms/ps3/setup.c +++ b/arch/powerpc/platforms/ps3/setup.c @@ -95,6 +95,14 @@ static void ps3_power_off(void) ps3_sys_manager_power_off(); /* never returns */ } +static void ps3_halt(void) +{ + DBG("%s:%d\n", __func__, __LINE__); + + smp_send_stop(); + ps3_sys_manager_halt(); /* never returns */ +} + static void ps3_panic(char *str) { DBG("%s:%d %s\n", __func__, __LINE__, str); @@ -105,7 +113,8 @@ static void ps3_panic(char *str) printk(" Please press POWER button.\n"); printk("\n"); - while(1); + while(1) + lv1_pause(1); } #if defined(CONFIG_FB_PS3) || defined(CONFIG_FB_PS3_MODULE) || \ @@ -117,7 +126,7 @@ static void __init prealloc(struct ps3_prealloc *p) p->address = __alloc_bootmem(p->size, p->align, __pa(MAX_DMA_ADDRESS)); if (!p->address) { - printk(KERN_ERR "%s: Cannot allocate %s\n", __FUNCTION__, + printk(KERN_ERR "%s: Cannot allocate %s\n", __func__, p->name); return; } @@ -266,6 +275,7 @@ define_machine(ps3) { .progress = ps3_progress, .restart = ps3_restart, .power_off = ps3_power_off, + .halt = ps3_halt, #if defined(CONFIG_KEXEC) .kexec_cpu_down = ps3_kexec_cpu_down, .machine_kexec = default_machine_kexec, diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c index 5ad41189b49..d135cef9ed6 100644 --- a/arch/powerpc/platforms/ps3/spu.c +++ b/arch/powerpc/platforms/ps3/spu.c @@ -27,6 +27,7 @@ #include <asm/spu.h> #include <asm/spu_priv1.h> #include <asm/lv1call.h> +#include <asm/ps3.h> #include "../cell/spufs/spufs.h" #include "platform.h" @@ -140,6 +141,12 @@ static void _dump_areas(unsigned int spe_id, unsigned long priv2, pr_debug("%s:%d: shadow: %lxh\n", func, line, shadow); } +inline u64 ps3_get_spe_id(void *arg) +{ + return spu_pdata(arg)->spe_id; +} +EXPORT_SYMBOL_GPL(ps3_get_spe_id); + static unsigned long get_vas_id(void) { unsigned long id; diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 992ba6753cf..bdae04bb7a0 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -18,3 +18,4 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o obj-$(CONFIG_HVCS) += hvcserver.o obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o +obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 9eb539ee5f9..550b2f7d2cc 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -945,7 +945,6 @@ static void *early_enable_eeh(struct device_node *dn, void *data) unsigned int rets[3]; struct eeh_early_enable_info *info = data; int ret; - const char *status = of_get_property(dn, "status", NULL); const u32 *class_code = of_get_property(dn, "class-code", NULL); const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL); const u32 *device_id = of_get_property(dn, "device-id", NULL); @@ -959,8 +958,8 @@ static void *early_enable_eeh(struct device_node *dn, void *data) pdn->eeh_freeze_count = 0; pdn->eeh_false_positives = 0; - if (status && strncmp(status, "ok", 2) != 0) - return NULL; /* ignore devices with bad status */ + if (!of_device_is_available(dn)) + return NULL; /* Ignore bad nodes. */ if (!class_code || !vendor_id || !device_id) diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 9a455d46379..9235c469449 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -40,6 +40,7 @@ #include <asm/smp.h> #include "plpar_wrappers.h" +#include "pseries.h" #ifdef DEBUG_LOW #define DBG_LOW(fmt...) do { udbg_printf(fmt); } while(0) @@ -203,7 +204,6 @@ void __init find_udbg_vterm(void) struct device_node *stdout_node; const u32 *termno; const char *name; - int add_console; /* find the boot console from /chosen/stdout */ if (!of_chosen) @@ -219,8 +219,6 @@ void __init find_udbg_vterm(void) printk(KERN_WARNING "stdout node missing 'name' property!\n"); goto out; } - /* The user has requested a console so this is already set up. */ - add_console = !strstr(cmd_line, "console="); /* Check if it's a virtual terminal */ if (strncmp(name, "vty", 3) != 0) @@ -234,15 +232,13 @@ void __init find_udbg_vterm(void) udbg_putc = udbg_putcLP; udbg_getc = udbg_getcLP; udbg_getc_poll = udbg_getc_pollLP; - if (add_console) - add_preferred_console("hvc", termno[0] & 0xff, NULL); + add_preferred_console("hvc", termno[0] & 0xff, NULL); } else if (of_device_is_compatible(stdout_node, "hvterm-protocol")) { vtermno = termno[0]; udbg_putc = udbg_hvsi_putc; udbg_getc = udbg_hvsi_getc; udbg_getc_poll = udbg_hvsi_getc_poll; - if (add_console) - add_preferred_console("hvsi", termno[0] & 0xff, NULL); + add_preferred_console("hvsi", termno[0] & 0xff, NULL); } out: of_node_put(stdout_node); @@ -520,6 +516,20 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va, BUG_ON(lpar_rc != H_SUCCESS); } +static void pSeries_lpar_hpte_removebolted(unsigned long ea, + int psize, int ssize) +{ + unsigned long slot, vsid, va; + + vsid = get_kernel_vsid(ea, ssize); + va = hpt_va(ea, vsid, ssize); + + slot = pSeries_lpar_hpte_find(va, psize, ssize); + BUG_ON(slot == -1); + + pSeries_lpar_hpte_invalidate(slot, va, psize, ssize, 0); +} + /* Flag bits for H_BULK_REMOVE */ #define HBR_REQUEST 0x4000000000000000UL #define HBR_RESPONSE 0x8000000000000000UL @@ -597,6 +607,7 @@ void __init hpte_init_lpar(void) ppc_md.hpte_updateboltedpp = pSeries_lpar_hpte_updateboltedpp; ppc_md.hpte_insert = pSeries_lpar_hpte_insert; ppc_md.hpte_remove = pSeries_lpar_hpte_remove; + ppc_md.hpte_removebolted = pSeries_lpar_hpte_removebolted; ppc_md.flush_hash_range = pSeries_lpar_flush_hash_range; ppc_md.hpte_clear_all = pSeries_lpar_hptab_clear; } diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 5a5a19e40bb..21a6d55418f 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -88,11 +88,8 @@ pcibios_fixup_new_pci_devices(struct pci_bus *bus) struct pci_dev *dev; list_for_each_entry(dev, &bus->devices, bus_list) { - /* - * Skip already-present devices (which are on the - * global device list.) - */ - if (list_empty(&dev->global_list)) { + /* Skip already-added devices */ + if (!dev->is_added) { int i; /* Fill device archdata and setup iommu table */ @@ -123,7 +120,7 @@ pcibios_pci_config_bridge(struct pci_dev *dev) /* Add to children of PCI bridge dev->bus */ child_bus = pci_add_new_bus(dev->bus, dev, sec_busno); if (!child_bus) { - printk (KERN_ERR "%s: could not add second bus\n", __FUNCTION__); + printk (KERN_ERR "%s: could not add second bus\n", __func__); return -EIO; } sprintf(child_bus->name, "PCI Bus #%02x", child_bus->number); diff --git a/arch/powerpc/platforms/pseries/phyp_dump.c b/arch/powerpc/platforms/pseries/phyp_dump.c new file mode 100644 index 00000000000..edbc012c2eb --- /dev/null +++ b/arch/powerpc/platforms/pseries/phyp_dump.c @@ -0,0 +1,507 @@ +/* + * Hypervisor-assisted dump + * + * Linas Vepstas, Manish Ahuja 2008 + * Copyright 2008 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/init.h> +#include <linux/kobject.h> +#include <linux/mm.h> +#include <linux/of.h> +#include <linux/pfn.h> +#include <linux/swap.h> +#include <linux/sysfs.h> + +#include <asm/page.h> +#include <asm/phyp_dump.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/rtas.h> + +/* Variables, used to communicate data between early boot and late boot */ +static struct phyp_dump phyp_dump_vars; +struct phyp_dump *phyp_dump_info = &phyp_dump_vars; + +static int ibm_configure_kernel_dump; +/* ------------------------------------------------- */ +/* RTAS interfaces to declare the dump regions */ + +struct dump_section { + u32 dump_flags; + u16 source_type; + u16 error_flags; + u64 source_address; + u64 source_length; + u64 length_copied; + u64 destination_address; +}; + +struct phyp_dump_header { + u32 version; + u16 num_of_sections; + u16 status; + + u32 first_offset_section; + u32 dump_disk_section; + u64 block_num_dd; + u64 num_of_blocks_dd; + u32 offset_dd; + u32 maxtime_to_auto; + /* No dump disk path string used */ + + struct dump_section cpu_data; + struct dump_section hpte_data; + struct dump_section kernel_data; +}; + +/* The dump header *must be* in low memory, so .bss it */ +static struct phyp_dump_header phdr; + +#define NUM_DUMP_SECTIONS 3 +#define DUMP_HEADER_VERSION 0x1 +#define DUMP_REQUEST_FLAG 0x1 +#define DUMP_SOURCE_CPU 0x0001 +#define DUMP_SOURCE_HPTE 0x0002 +#define DUMP_SOURCE_RMO 0x0011 +#define DUMP_ERROR_FLAG 0x2000 +#define DUMP_TRIGGERED 0x4000 +#define DUMP_PERFORMED 0x8000 + + +/** + * init_dump_header() - initialize the header declaring a dump + * Returns: length of dump save area. + * + * When the hypervisor saves crashed state, it needs to put + * it somewhere. The dump header tells the hypervisor where + * the data can be saved. + */ +static unsigned long init_dump_header(struct phyp_dump_header *ph) +{ + unsigned long addr_offset = 0; + + /* Set up the dump header */ + ph->version = DUMP_HEADER_VERSION; + ph->num_of_sections = NUM_DUMP_SECTIONS; + ph->status = 0; + + ph->first_offset_section = + (u32)offsetof(struct phyp_dump_header, cpu_data); + ph->dump_disk_section = 0; + ph->block_num_dd = 0; + ph->num_of_blocks_dd = 0; + ph->offset_dd = 0; + + ph->maxtime_to_auto = 0; /* disabled */ + + /* The first two sections are mandatory */ + ph->cpu_data.dump_flags = DUMP_REQUEST_FLAG; + ph->cpu_data.source_type = DUMP_SOURCE_CPU; + ph->cpu_data.source_address = 0; + ph->cpu_data.source_length = phyp_dump_info->cpu_state_size; + ph->cpu_data.destination_address = addr_offset; + addr_offset += phyp_dump_info->cpu_state_size; + + ph->hpte_data.dump_flags = DUMP_REQUEST_FLAG; + ph->hpte_data.source_type = DUMP_SOURCE_HPTE; + ph->hpte_data.source_address = 0; + ph->hpte_data.source_length = phyp_dump_info->hpte_region_size; + ph->hpte_data.destination_address = addr_offset; + addr_offset += phyp_dump_info->hpte_region_size; + + /* This section describes the low kernel region */ + ph->kernel_data.dump_flags = DUMP_REQUEST_FLAG; + ph->kernel_data.source_type = DUMP_SOURCE_RMO; + ph->kernel_data.source_address = PHYP_DUMP_RMR_START; + ph->kernel_data.source_length = PHYP_DUMP_RMR_END; + ph->kernel_data.destination_address = addr_offset; + addr_offset += ph->kernel_data.source_length; + + return addr_offset; +} + +static void print_dump_header(const struct phyp_dump_header *ph) +{ +#ifdef DEBUG + printk(KERN_INFO "dump header:\n"); + /* setup some ph->sections required */ + printk(KERN_INFO "version = %d\n", ph->version); + printk(KERN_INFO "Sections = %d\n", ph->num_of_sections); + printk(KERN_INFO "Status = 0x%x\n", ph->status); + + /* No ph->disk, so all should be set to 0 */ + printk(KERN_INFO "Offset to first section 0x%x\n", + ph->first_offset_section); + printk(KERN_INFO "dump disk sections should be zero\n"); + printk(KERN_INFO "dump disk section = %d\n", ph->dump_disk_section); + printk(KERN_INFO "block num = %ld\n", ph->block_num_dd); + printk(KERN_INFO "number of blocks = %ld\n", ph->num_of_blocks_dd); + printk(KERN_INFO "dump disk offset = %d\n", ph->offset_dd); + printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto); + + /*set cpu state and hpte states as well scratch pad area */ + printk(KERN_INFO " CPU AREA \n"); + printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags); + printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type); + printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags); + printk(KERN_INFO "cpu source_address =%lx\n", + ph->cpu_data.source_address); + printk(KERN_INFO "cpu source_length =%lx\n", + ph->cpu_data.source_length); + printk(KERN_INFO "cpu length_copied =%lx\n", + ph->cpu_data.length_copied); + + printk(KERN_INFO " HPTE AREA \n"); + printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags); + printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type); + printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags); + printk(KERN_INFO "HPTE source_address =%lx\n", + ph->hpte_data.source_address); + printk(KERN_INFO "HPTE source_length =%lx\n", + ph->hpte_data.source_length); + printk(KERN_INFO "HPTE length_copied =%lx\n", + ph->hpte_data.length_copied); + + printk(KERN_INFO " SRSD AREA \n"); + printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags); + printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type); + printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags); + printk(KERN_INFO "SRSD source_address =%lx\n", + ph->kernel_data.source_address); + printk(KERN_INFO "SRSD source_length =%lx\n", + ph->kernel_data.source_length); + printk(KERN_INFO "SRSD length_copied =%lx\n", + ph->kernel_data.length_copied); +#endif +} + +static ssize_t show_phyp_dump_active(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + + /* create filesystem entry so kdump is phyp-dump aware */ + return sprintf(buf, "%lx\n", phyp_dump_info->phyp_dump_at_boot); +} + +static struct kobj_attribute pdl = __ATTR(phyp_dump_active, 0600, + show_phyp_dump_active, + NULL); + +static void register_dump_area(struct phyp_dump_header *ph, unsigned long addr) +{ + int rc; + + /* Add addr value if not initialized before */ + if (ph->cpu_data.destination_address == 0) { + ph->cpu_data.destination_address += addr; + ph->hpte_data.destination_address += addr; + ph->kernel_data.destination_address += addr; + } + + /* ToDo Invalidate kdump and free memory range. */ + + do { + rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL, + 1, ph, sizeof(struct phyp_dump_header)); + } while (rtas_busy_delay(rc)); + + if (rc) { + printk(KERN_ERR "phyp-dump: unexpected error (%d) on " + "register\n", rc); + print_dump_header(ph); + return; + } + + rc = sysfs_create_file(kernel_kobj, &pdl.attr); + if (rc) + printk(KERN_ERR "phyp-dump: unable to create sysfs" + " file (%d)\n", rc); +} + +static +void invalidate_last_dump(struct phyp_dump_header *ph, unsigned long addr) +{ + int rc; + + /* Add addr value if not initialized before */ + if (ph->cpu_data.destination_address == 0) { + ph->cpu_data.destination_address += addr; + ph->hpte_data.destination_address += addr; + ph->kernel_data.destination_address += addr; + } + + do { + rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL, + 2, ph, sizeof(struct phyp_dump_header)); + } while (rtas_busy_delay(rc)); + + if (rc) { + printk(KERN_ERR "phyp-dump: unexpected error (%d) " + "on invalidate\n", rc); + print_dump_header(ph); + } +} + +/* ------------------------------------------------- */ +/** + * release_memory_range -- release memory previously lmb_reserved + * @start_pfn: starting physical frame number + * @nr_pages: number of pages to free. + * + * This routine will release memory that had been previously + * lmb_reserved in early boot. The released memory becomes + * available for genreal use. + */ +static void release_memory_range(unsigned long start_pfn, + unsigned long nr_pages) +{ + struct page *rpage; + unsigned long end_pfn; + long i; + + end_pfn = start_pfn + nr_pages; + + for (i = start_pfn; i <= end_pfn; i++) { + rpage = pfn_to_page(i); + if (PageReserved(rpage)) { + ClearPageReserved(rpage); + init_page_count(rpage); + __free_page(rpage); + totalram_pages++; + } + } +} + +/** + * track_freed_range -- Counts the range being freed. + * Once the counter goes to zero, it re-registers dump for + * future use. + */ +static void +track_freed_range(unsigned long addr, unsigned long length) +{ + static unsigned long scratch_area_size, reserved_area_size; + + if (addr < phyp_dump_info->init_reserve_start) + return; + + if ((addr >= phyp_dump_info->init_reserve_start) && + (addr <= phyp_dump_info->init_reserve_start + + phyp_dump_info->init_reserve_size)) + reserved_area_size += length; + + if ((addr >= phyp_dump_info->reserved_scratch_addr) && + (addr <= phyp_dump_info->reserved_scratch_addr + + phyp_dump_info->reserved_scratch_size)) + scratch_area_size += length; + + if ((reserved_area_size == phyp_dump_info->init_reserve_size) && + (scratch_area_size == phyp_dump_info->reserved_scratch_size)) { + + invalidate_last_dump(&phdr, + phyp_dump_info->reserved_scratch_addr); + register_dump_area(&phdr, + phyp_dump_info->reserved_scratch_addr); + } +} + +/* ------------------------------------------------- */ +/** + * sysfs_release_region -- sysfs interface to release memory range. + * + * Usage: + * "echo <start addr> <length> > /sys/kernel/release_region" + * + * Example: + * "echo 0x40000000 0x10000000 > /sys/kernel/release_region" + * + * will release 256MB starting at 1GB. + */ +static ssize_t store_release_region(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t count) +{ + unsigned long start_addr, length, end_addr; + unsigned long start_pfn, nr_pages; + ssize_t ret; + + ret = sscanf(buf, "%lx %lx", &start_addr, &length); + if (ret != 2) + return -EINVAL; + + track_freed_range(start_addr, length); + + /* Range-check - don't free any reserved memory that + * wasn't reserved for phyp-dump */ + if (start_addr < phyp_dump_info->init_reserve_start) + start_addr = phyp_dump_info->init_reserve_start; + + end_addr = phyp_dump_info->init_reserve_start + + phyp_dump_info->init_reserve_size; + if (start_addr+length > end_addr) + length = end_addr - start_addr; + + /* Release the region of memory assed in by user */ + start_pfn = PFN_DOWN(start_addr); + nr_pages = PFN_DOWN(length); + release_memory_range(start_pfn, nr_pages); + + return count; +} + +static ssize_t show_release_region(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + u64 second_addr_range; + + /* total reserved size - start of scratch area */ + second_addr_range = phyp_dump_info->init_reserve_size - + phyp_dump_info->reserved_scratch_size; + return sprintf(buf, "CPU:0x%lx-0x%lx: HPTE:0x%lx-0x%lx:" + " DUMP:0x%lx-0x%lx, 0x%lx-0x%lx:\n", + phdr.cpu_data.destination_address, + phdr.cpu_data.length_copied, + phdr.hpte_data.destination_address, + phdr.hpte_data.length_copied, + phdr.kernel_data.destination_address, + phdr.kernel_data.length_copied, + phyp_dump_info->init_reserve_start, + second_addr_range); +} + +static struct kobj_attribute rr = __ATTR(release_region, 0600, + show_release_region, + store_release_region); + +static int __init phyp_dump_setup(void) +{ + struct device_node *rtas; + const struct phyp_dump_header *dump_header = NULL; + unsigned long dump_area_start; + unsigned long dump_area_length; + int header_len = 0; + int rc; + + /* If no memory was reserved in early boot, there is nothing to do */ + if (phyp_dump_info->init_reserve_size == 0) + return 0; + + /* Return if phyp dump not supported */ + if (!phyp_dump_info->phyp_dump_configured) + return -ENOSYS; + + /* Is there dump data waiting for us? If there isn't, + * then register a new dump area, and release all of + * the rest of the reserved ram. + * + * The /rtas/ibm,kernel-dump rtas node is present only + * if there is dump data waiting for us. + */ + rtas = of_find_node_by_path("/rtas"); + if (rtas) { + dump_header = of_get_property(rtas, "ibm,kernel-dump", + &header_len); + of_node_put(rtas); + } + + print_dump_header(dump_header); + dump_area_length = init_dump_header(&phdr); + /* align down */ + dump_area_start = phyp_dump_info->init_reserve_start & PAGE_MASK; + + if (dump_header == NULL) { + register_dump_area(&phdr, dump_area_start); + return 0; + } + + /* re-register the dump area, if old dump was invalid */ + if ((dump_header) && (dump_header->status & DUMP_ERROR_FLAG)) { + invalidate_last_dump(&phdr, dump_area_start); + register_dump_area(&phdr, dump_area_start); + return 0; + } + + if (dump_header) { + phyp_dump_info->reserved_scratch_addr = + dump_header->cpu_data.destination_address; + phyp_dump_info->reserved_scratch_size = + dump_header->cpu_data.source_length + + dump_header->hpte_data.source_length + + dump_header->kernel_data.source_length; + } + + /* Should we create a dump_subsys, analogous to s390/ipl.c ? */ + rc = sysfs_create_file(kernel_kobj, &rr.attr); + if (rc) + printk(KERN_ERR "phyp-dump: unable to create sysfs file (%d)\n", + rc); + + /* ToDo: re-register the dump area, for next time. */ + return 0; +} +machine_subsys_initcall(pseries, phyp_dump_setup); + +int __init early_init_dt_scan_phyp_dump(unsigned long node, + const char *uname, int depth, void *data) +{ + const unsigned int *sizes; + + phyp_dump_info->phyp_dump_configured = 0; + phyp_dump_info->phyp_dump_is_active = 0; + + if (depth != 1 || strcmp(uname, "rtas") != 0) + return 0; + + if (of_get_flat_dt_prop(node, "ibm,configure-kernel-dump", NULL)) + phyp_dump_info->phyp_dump_configured++; + + if (of_get_flat_dt_prop(node, "ibm,dump-kernel", NULL)) + phyp_dump_info->phyp_dump_is_active++; + + sizes = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump-sizes", + NULL); + if (!sizes) + return 0; + + if (sizes[0] == 1) + phyp_dump_info->cpu_state_size = *((unsigned long *)&sizes[1]); + + if (sizes[3] == 2) + phyp_dump_info->hpte_region_size = + *((unsigned long *)&sizes[4]); + return 1; +} + +/* Look for phyp_dump= cmdline option */ +static int __init early_phyp_dump_enabled(char *p) +{ + phyp_dump_info->phyp_dump_at_boot = 1; + + if (!p) + return 0; + + if (strncmp(p, "1", 1) == 0) + phyp_dump_info->phyp_dump_at_boot = 1; + else if (strncmp(p, "0", 1) == 0) + phyp_dump_info->phyp_dump_at_boot = 0; + + return 0; +} +early_param("phyp_dump", early_phyp_dump_enabled); + +/* Look for phyp_dump_reserve_size= cmdline option */ +static int __init early_phyp_dump_reserve_size(char *p) +{ + if (p) + phyp_dump_info->reserve_bootvar = memparse(p, &p); + + return 0; +} +early_param("phyp_dump_reserve_size", early_phyp_dump_reserve_size); diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 61136d01955..9e17c0d2a0c 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -38,4 +38,6 @@ extern void pSeries_final_fixup(void); /* Poweron flag used for enabling auto ups restart */ extern unsigned long rtas_poweron_auto; +extern void find_udbg_vterm(void); + #endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 2800fced8c7..ac75c10de27 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -222,14 +222,14 @@ static char * parse_next_property(char *buf, char *end, char **name, int *length tmp = strchr(buf, ' '); if (!tmp) { printk(KERN_ERR "property parse failed in %s at line %d\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); return NULL; } *tmp = '\0'; if (++tmp >= end) { printk(KERN_ERR "property parse failed in %s at line %d\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); return NULL; } @@ -238,12 +238,12 @@ static char * parse_next_property(char *buf, char *end, char **name, int *length *length = simple_strtoul(tmp, &tmp, 10); if (*length == -1) { printk(KERN_ERR "property parse failed in %s at line %d\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); return NULL; } if (*tmp != ' ' || ++tmp >= end) { printk(KERN_ERR "property parse failed in %s at line %d\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); return NULL; } @@ -252,12 +252,12 @@ static char * parse_next_property(char *buf, char *end, char **name, int *length tmp += *length; if (tmp > end) { printk(KERN_ERR "property parse failed in %s at line %d\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); return NULL; } else if (tmp < end && *tmp != ' ' && *tmp != '\0') { printk(KERN_ERR "property parse failed in %s at line %d\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); return NULL; } tmp++; diff --git a/arch/powerpc/platforms/pseries/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c index 8e1ef168e2d..e5b0ea87016 100644 --- a/arch/powerpc/platforms/pseries/scanlog.c +++ b/arch/powerpc/platforms/pseries/scanlog.c @@ -195,31 +195,30 @@ const struct file_operations scanlog_fops = { static int __init scanlog_init(void) { struct proc_dir_entry *ent; + void *data; + int err = -ENOMEM; ibm_scan_log_dump = rtas_token("ibm,scan-log-dump"); - if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE) { - printk(KERN_ERR "scan-log-dump not implemented on this system\n"); - return -EIO; - } + if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE) + return -ENODEV; - ent = create_proc_entry("ppc64/rtas/scan-log-dump", S_IRUSR, NULL); - if (ent) { - ent->proc_fops = &scanlog_fops; - /* Ideally we could allocate a buffer < 4G */ - ent->data = kmalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL); - if (!ent->data) { - printk(KERN_ERR "Failed to allocate a buffer\n"); - remove_proc_entry("scan-log-dump", ent->parent); - return -ENOMEM; - } - ((unsigned int *)ent->data)[0] = 0; - } else { - printk(KERN_ERR "Failed to create ppc64/scan-log-dump proc entry\n"); - return -EIO; - } + /* Ideally we could allocate a buffer < 4G */ + data = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL); + if (!data) + goto err; + + ent = proc_create("ppc64/rtas/scan-log-dump", S_IRUSR, NULL, + &scanlog_fops); + if (!ent) + goto err; + + ent->data = data; proc_ppc64_scan_log_dump = ent; return 0; +err: + kfree(data); + return err; } static void __exit scanlog_cleanup(void) diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index fdb9b1c8f97..f66aa9c3b13 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -76,9 +76,6 @@ #define DBG(fmt...) #endif -/* move those away to a .h */ -extern void find_udbg_vterm(void); - int fwnmi_active; /* TRUE if an FWNMI handler is present */ static void pseries_shared_idle_sleep(void); @@ -127,14 +124,60 @@ void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc) desc->chip->eoi(irq); } -static void __init pseries_mpic_init_IRQ(void) +static void __init pseries_setup_i8259_cascade(void) { - struct device_node *np, *old, *cascade = NULL; - const unsigned int *addrp; + struct device_node *np, *old, *found = NULL; + unsigned int cascade; + const u32 *addrp; unsigned long intack = 0; + int naddr; + + for_each_node_by_type(np, "interrupt-controller") { + if (of_device_is_compatible(np, "chrp,iic")) { + found = np; + break; + } + } + + if (found == NULL) { + printk(KERN_DEBUG "pic: no ISA interrupt controller\n"); + return; + } + + cascade = irq_of_parse_and_map(found, 0); + if (cascade == NO_IRQ) { + printk(KERN_ERR "pic: failed to map cascade interrupt"); + return; + } + pr_debug("pic: cascade mapped to irq %d\n", cascade); + + for (old = of_node_get(found); old != NULL ; old = np) { + np = of_get_parent(old); + of_node_put(old); + if (np == NULL) + break; + if (strcmp(np->name, "pci") != 0) + continue; + addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL); + if (addrp == NULL) + continue; + naddr = of_n_addr_cells(np); + intack = addrp[naddr-1]; + if (naddr > 1) + intack |= ((unsigned long)addrp[naddr-2]) << 32; + } + if (intack) + printk(KERN_DEBUG "pic: PCI 8259 intack at 0x%016lx\n", intack); + i8259_init(found, intack); + of_node_put(found); + set_irq_chained_handler(cascade, pseries_8259_cascade); +} + +static void __init pseries_mpic_init_IRQ(void) +{ + struct device_node *np; const unsigned int *opprop; unsigned long openpic_addr = 0; - unsigned int cascade_irq; int naddr, n, i, opplen; struct mpic *mpic; @@ -167,43 +210,13 @@ static void __init pseries_mpic_init_IRQ(void) mpic_init(mpic); /* Look for cascade */ - for_each_node_by_type(np, "interrupt-controller") - if (of_device_is_compatible(np, "chrp,iic")) { - cascade = np; - break; - } - if (cascade == NULL) - return; - - cascade_irq = irq_of_parse_and_map(cascade, 0); - if (cascade_irq == NO_IRQ) { - printk(KERN_ERR "mpic: failed to map cascade interrupt"); - return; - } + pseries_setup_i8259_cascade(); +} - /* Check ACK type */ - for (old = of_node_get(cascade); old != NULL ; old = np) { - np = of_get_parent(old); - of_node_put(old); - if (np == NULL) - break; - if (strcmp(np->name, "pci") != 0) - continue; - addrp = of_get_property(np, "8259-interrupt-acknowledge", - NULL); - if (addrp == NULL) - continue; - naddr = of_n_addr_cells(np); - intack = addrp[naddr-1]; - if (naddr > 1) - intack |= ((unsigned long)addrp[naddr-2]) << 32; - } - if (intack) - printk(KERN_DEBUG "mpic: PCI 8259 intack at 0x%016lx\n", - intack); - i8259_init(cascade, intack); - of_node_put(cascade); - set_irq_chained_handler(cascade_irq, pseries_8259_cascade); +static void __init pseries_xics_init_IRQ(void) +{ + xics_init_IRQ(); + pseries_setup_i8259_cascade(); } static void pseries_lpar_enable_pmcs(void) @@ -235,7 +248,7 @@ static void __init pseries_discover_pic(void) smp_init_pseries_mpic(); return; } else if (strstr(typep, "ppc-xicp")) { - ppc_md.init_IRQ = xics_init_IRQ; + ppc_md.init_IRQ = pseries_xics_init_IRQ; setup_kexec_cpu_down_xics(); smp_init_pseries_xics(); return; @@ -393,6 +406,7 @@ static void pseries_dedicated_idle_sleep(void) { unsigned int cpu = smp_processor_id(); unsigned long start_snooze; + unsigned long in_purr, out_purr; /* * Indicate to the HV that we are idle. Now would be @@ -400,6 +414,7 @@ static void pseries_dedicated_idle_sleep(void) */ get_lppaca()->idle = 1; get_lppaca()->donate_dedicated_cpu = 1; + in_purr = mfspr(SPRN_PURR); /* * We come in with interrupts disabled, and need_resched() @@ -432,6 +447,8 @@ static void pseries_dedicated_idle_sleep(void) out: HMT_medium(); + out_purr = mfspr(SPRN_PURR); + get_lppaca()->wait_state_cycles += out_purr - in_purr; get_lppaca()->donate_dedicated_cpu = 0; get_lppaca()->idle = 0; } diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index a977f200db8..43df53c30aa 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -516,6 +516,8 @@ static struct irq_chip xics_pic_lpar = { .set_affinity = xics_set_affinity }; +/* Points to the irq_chip we're actually using */ +static struct irq_chip *xics_irq_chip; static int xics_host_match(struct irq_host *h, struct device_node *node) { @@ -526,23 +528,13 @@ static int xics_host_match(struct irq_host *h, struct device_node *node) return !of_device_is_compatible(node, "chrp,iic"); } -static int xics_host_map_direct(struct irq_host *h, unsigned int virq, - irq_hw_number_t hw) +static int xics_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) { - pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw); + pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw); get_irq_desc(virq)->status |= IRQ_LEVEL; - set_irq_chip_and_handler(virq, &xics_pic_direct, handle_fasteoi_irq); - return 0; -} - -static int xics_host_map_lpar(struct irq_host *h, unsigned int virq, - irq_hw_number_t hw) -{ - pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw); - - get_irq_desc(virq)->status |= IRQ_LEVEL; - set_irq_chip_and_handler(virq, &xics_pic_lpar, handle_fasteoi_irq); + set_irq_chip_and_handler(virq, xics_irq_chip, handle_fasteoi_irq); return 0; } @@ -561,27 +553,20 @@ static int xics_host_xlate(struct irq_host *h, struct device_node *ct, return 0; } -static struct irq_host_ops xics_host_direct_ops = { +static struct irq_host_ops xics_host_ops = { .match = xics_host_match, - .map = xics_host_map_direct, - .xlate = xics_host_xlate, -}; - -static struct irq_host_ops xics_host_lpar_ops = { - .match = xics_host_match, - .map = xics_host_map_lpar, + .map = xics_host_map, .xlate = xics_host_xlate, }; static void __init xics_init_host(void) { - struct irq_host_ops *ops; - if (firmware_has_feature(FW_FEATURE_LPAR)) - ops = &xics_host_lpar_ops; + xics_irq_chip = &xics_pic_lpar; else - ops = &xics_host_direct_ops; - xics_host = irq_alloc_host(NULL, IRQ_HOST_MAP_TREE, 0, ops, + xics_irq_chip = &xics_pic_direct; + + xics_host = irq_alloc_host(NULL, IRQ_HOST_MAP_TREE, 0, &xics_host_ops, XICS_IRQ_SPURIOUS); BUG_ON(xics_host == NULL); irq_set_default_host(xics_host); @@ -655,52 +640,6 @@ static void __init xics_init_one_node(struct device_node *np, } } - -static void __init xics_setup_8259_cascade(void) -{ - struct device_node *np, *old, *found = NULL; - int cascade, naddr; - const u32 *addrp; - unsigned long intack = 0; - - for_each_node_by_type(np, "interrupt-controller") - if (of_device_is_compatible(np, "chrp,iic")) { - found = np; - break; - } - if (found == NULL) { - printk(KERN_DEBUG "xics: no ISA interrupt controller\n"); - return; - } - cascade = irq_of_parse_and_map(found, 0); - if (cascade == NO_IRQ) { - printk(KERN_ERR "xics: failed to map cascade interrupt"); - return; - } - pr_debug("xics: cascade mapped to irq %d\n", cascade); - - for (old = of_node_get(found); old != NULL ; old = np) { - np = of_get_parent(old); - of_node_put(old); - if (np == NULL) - break; - if (strcmp(np->name, "pci") != 0) - continue; - addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL); - if (addrp == NULL) - continue; - naddr = of_n_addr_cells(np); - intack = addrp[naddr-1]; - if (naddr > 1) - intack |= ((unsigned long)addrp[naddr-2]) << 32; - } - if (intack) - printk(KERN_DEBUG "xics: PCI 8259 intack at 0x%016lx\n", intack); - i8259_init(found, intack); - of_node_put(found); - set_irq_chained_handler(cascade, pseries_8259_cascade); -} - void __init xics_init_IRQ(void) { struct device_node *np; @@ -733,8 +672,6 @@ void __init xics_init_IRQ(void) xics_setup_cpu(); - xics_setup_8259_cascade(); - ppc64_boot_msg(0x21, "XICS Done"); } diff --git a/arch/powerpc/platforms/pseries/xics.h b/arch/powerpc/platforms/pseries/xics.h index c26bcff47b6..1c5321ae8f2 100644 --- a/arch/powerpc/platforms/pseries/xics.h +++ b/arch/powerpc/platforms/pseries/xics.h @@ -28,7 +28,4 @@ struct xics_ipi_struct { extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned; -struct irq_desc; -extern void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc); - #endif /* _POWERPC_KERNEL_XICS_H */ diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 15f3e8527d7..6d386d0071a 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o obj-$(CONFIG_FSL_PCI) += fsl_pci.o +obj-$(CONFIG_FSL_LBC) += fsl_lbc.o obj-$(CONFIG_RAPIDIO) += fsl_rio.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ @@ -27,6 +28,7 @@ obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_IPIC) += ipic.o obj-$(CONFIG_4xx) += uic.o +obj-$(CONFIG_4xx_SOC) += ppc4xx_soc.o obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o obj-$(CONFIG_OF_RTC) += of_rtc.o ifeq ($(CONFIG_PCI),y) diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c index df8bd2b6479..58292a086c1 100644 --- a/arch/powerpc/sysdev/cpm1.c +++ b/arch/powerpc/sysdev/cpm1.c @@ -44,9 +44,6 @@ #define CPM_MAP_SIZE (0x4000) -#ifndef CONFIG_PPC_CPM_NEW_BINDING -static void m8xx_cpm_dpinit(void); -#endif cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */ immap_t __iomem *mpc8xx_immr; static cpic8xx_t __iomem *cpic_reg; @@ -229,12 +226,7 @@ void __init cpm_reset(void) out_be32(&siu_conf->sc_sdcr, 1); immr_unmap(siu_conf); -#ifdef CONFIG_PPC_CPM_NEW_BINDING cpm_muram_init(); -#else - /* Reclaim the DP memory for our use. */ - m8xx_cpm_dpinit(); -#endif } static DEFINE_SPINLOCK(cmd_lock); @@ -257,7 +249,7 @@ int cpm_command(u32 command, u8 opcode) if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0) goto out; - printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__); + printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__); ret = -EIO; out: spin_unlock_irqrestore(&cmd_lock, flags); @@ -293,110 +285,6 @@ cpm_setbrg(uint brg, uint rate) CPM_BRG_EN | CPM_BRG_DIV16); } -#ifndef CONFIG_PPC_CPM_NEW_BINDING -/* - * dpalloc / dpfree bits. - */ -static spinlock_t cpm_dpmem_lock; -/* - * 16 blocks should be enough to satisfy all requests - * until the memory subsystem goes up... - */ -static rh_block_t cpm_boot_dpmem_rh_block[16]; -static rh_info_t cpm_dpmem_info; - -#define CPM_DPMEM_ALIGNMENT 8 -static u8 __iomem *dpram_vbase; -static phys_addr_t dpram_pbase; - -static void m8xx_cpm_dpinit(void) -{ - spin_lock_init(&cpm_dpmem_lock); - - dpram_vbase = cpmp->cp_dpmem; - dpram_pbase = get_immrbase() + offsetof(immap_t, im_cpm.cp_dpmem); - - /* Initialize the info header */ - rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT, - sizeof(cpm_boot_dpmem_rh_block) / - sizeof(cpm_boot_dpmem_rh_block[0]), - cpm_boot_dpmem_rh_block); - - /* - * Attach the usable dpmem area. - * XXX: This is actually crap. CPM_DATAONLY_BASE and - * CPM_DATAONLY_SIZE are a subset of the available dparm. It varies - * with the processor and the microcode patches applied / activated. - * But the following should be at least safe. - */ - rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE); -} - -/* - * Allocate the requested size worth of DP memory. - * This function returns an offset into the DPRAM area. - * Use cpm_dpram_addr() to get the virtual address of the area. - */ -unsigned long cpm_dpalloc(uint size, uint align) -{ - unsigned long start; - unsigned long flags; - - spin_lock_irqsave(&cpm_dpmem_lock, flags); - cpm_dpmem_info.alignment = align; - start = rh_alloc(&cpm_dpmem_info, size, "commproc"); - spin_unlock_irqrestore(&cpm_dpmem_lock, flags); - - return (uint)start; -} -EXPORT_SYMBOL(cpm_dpalloc); - -int cpm_dpfree(unsigned long offset) -{ - int ret; - unsigned long flags; - - spin_lock_irqsave(&cpm_dpmem_lock, flags); - ret = rh_free(&cpm_dpmem_info, offset); - spin_unlock_irqrestore(&cpm_dpmem_lock, flags); - - return ret; -} -EXPORT_SYMBOL(cpm_dpfree); - -unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align) -{ - unsigned long start; - unsigned long flags; - - spin_lock_irqsave(&cpm_dpmem_lock, flags); - cpm_dpmem_info.alignment = align; - start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc"); - spin_unlock_irqrestore(&cpm_dpmem_lock, flags); - - return start; -} -EXPORT_SYMBOL(cpm_dpalloc_fixed); - -void cpm_dpdump(void) -{ - rh_dump(&cpm_dpmem_info); -} -EXPORT_SYMBOL(cpm_dpdump); - -void *cpm_dpram_addr(unsigned long offset) -{ - return (void *)(dpram_vbase + offset); -} -EXPORT_SYMBOL(cpm_dpram_addr); - -uint cpm_dpram_phys(u8 *addr) -{ - return (dpram_pbase + (uint)(addr - dpram_vbase)); -} -EXPORT_SYMBOL(cpm_dpram_phys); -#endif /* !CONFIG_PPC_CPM_NEW_BINDING */ - struct cpm_ioport16 { __be16 dir, par, odr_sor, dat, intr; __be16 res[3]; diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c index dd066bb1d56..5a6c5dfc53e 100644 --- a/arch/powerpc/sysdev/cpm2.c +++ b/arch/powerpc/sysdev/cpm2.c @@ -46,10 +46,6 @@ #include <sysdev/fsl_soc.h> -#ifndef CONFIG_PPC_CPM_NEW_BINDING -static void cpm2_dpinit(void); -#endif - cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */ /* We allocate this here because it is used almost exclusively for @@ -71,15 +67,17 @@ void __init cpm2_reset(void) /* Reclaim the DP memory for our use. */ -#ifdef CONFIG_PPC_CPM_NEW_BINDING cpm_muram_init(); -#else - cpm2_dpinit(); -#endif /* Tell everyone where the comm processor resides. */ cpmp = &cpm2_immr->im_cpm; + +#ifndef CONFIG_PPC_EARLY_DEBUG_CPM + /* Reset the CPM. + */ + cpm_command(CPM_CR_RST, 0); +#endif } static DEFINE_SPINLOCK(cmd_lock); @@ -99,7 +97,7 @@ int cpm_command(u32 command, u8 opcode) if ((in_be32(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0) goto out; - printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__); + printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__); ret = -EIO; out: spin_unlock_irqrestore(&cmd_lock, flags); @@ -347,95 +345,6 @@ int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock) return ret; } -#ifndef CONFIG_PPC_CPM_NEW_BINDING -/* - * dpalloc / dpfree bits. - */ -static spinlock_t cpm_dpmem_lock; -/* 16 blocks should be enough to satisfy all requests - * until the memory subsystem goes up... */ -static rh_block_t cpm_boot_dpmem_rh_block[16]; -static rh_info_t cpm_dpmem_info; -static u8 __iomem *im_dprambase; - -static void cpm2_dpinit(void) -{ - spin_lock_init(&cpm_dpmem_lock); - - /* initialize the info header */ - rh_init(&cpm_dpmem_info, 1, - sizeof(cpm_boot_dpmem_rh_block) / - sizeof(cpm_boot_dpmem_rh_block[0]), - cpm_boot_dpmem_rh_block); - - im_dprambase = cpm2_immr; - - /* Attach the usable dpmem area */ - /* XXX: This is actually crap. CPM_DATAONLY_BASE and - * CPM_DATAONLY_SIZE is only a subset of the available dpram. It - * varies with the processor and the microcode patches activated. - * But the following should be at least safe. - */ - rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE); -} - -/* This function returns an index into the DPRAM area. - */ -unsigned long cpm_dpalloc(uint size, uint align) -{ - unsigned long start; - unsigned long flags; - - spin_lock_irqsave(&cpm_dpmem_lock, flags); - cpm_dpmem_info.alignment = align; - start = rh_alloc(&cpm_dpmem_info, size, "commproc"); - spin_unlock_irqrestore(&cpm_dpmem_lock, flags); - - return (uint)start; -} -EXPORT_SYMBOL(cpm_dpalloc); - -int cpm_dpfree(unsigned long offset) -{ - int ret; - unsigned long flags; - - spin_lock_irqsave(&cpm_dpmem_lock, flags); - ret = rh_free(&cpm_dpmem_info, offset); - spin_unlock_irqrestore(&cpm_dpmem_lock, flags); - - return ret; -} -EXPORT_SYMBOL(cpm_dpfree); - -/* not sure if this is ever needed */ -unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align) -{ - unsigned long start; - unsigned long flags; - - spin_lock_irqsave(&cpm_dpmem_lock, flags); - cpm_dpmem_info.alignment = align; - start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc"); - spin_unlock_irqrestore(&cpm_dpmem_lock, flags); - - return start; -} -EXPORT_SYMBOL(cpm_dpalloc_fixed); - -void cpm_dpdump(void) -{ - rh_dump(&cpm_dpmem_info); -} -EXPORT_SYMBOL(cpm_dpdump); - -void *cpm_dpram_addr(unsigned long offset) -{ - return (void *)(im_dprambase + offset); -} -EXPORT_SYMBOL(cpm_dpram_addr); -#endif /* !CONFIG_PPC_CPM_NEW_BINDING */ - struct cpm2_ioports { u32 dir, par, sor, odr, dat; u32 res[3]; diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c index 165981c8778..cb7df2dce44 100644 --- a/arch/powerpc/sysdev/cpm_common.c +++ b/arch/powerpc/sysdev/cpm_common.c @@ -58,7 +58,6 @@ void __init udbg_init_cpm(void) } #endif -#ifdef CONFIG_PPC_CPM_NEW_BINDING static spinlock_t cpm_muram_lock; static rh_block_t cpm_boot_muram_rh_block[16]; static rh_info_t cpm_muram_info; @@ -199,5 +198,3 @@ dma_addr_t cpm_muram_dma(void __iomem *addr) return muram_pbase + ((u8 __iomem *)addr - muram_vbase); } EXPORT_SYMBOL(cpm_muram_dma); - -#endif /* CONFIG_PPC_CPM_NEW_BINDING */ diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index e0e24b01e3a..005c2ecf976 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -37,6 +37,7 @@ #include <linux/dma-mapping.h> #include <linux/vmalloc.h> #include <linux/suspend.h> +#include <linux/lmb.h> #include <asm/io.h> #include <asm/prom.h> #include <asm/iommu.h> @@ -44,7 +45,6 @@ #include <asm/machdep.h> #include <asm/abs_addr.h> #include <asm/cacheflush.h> -#include <asm/lmb.h> #include <asm/ppc-pci.h> #include "dart.h" diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c new file mode 100644 index 00000000000..422c8faef59 --- /dev/null +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -0,0 +1,129 @@ +/* + * Freescale LBC and UPM routines. + * + * Copyright (c) 2007-2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/of.h> +#include <asm/fsl_lbc.h> + +spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock); + +struct fsl_lbc_regs __iomem *fsl_lbc_regs; +EXPORT_SYMBOL(fsl_lbc_regs); + +static char __initdata *compat_lbc[] = { + "fsl,pq2-localbus", + "fsl,pq2pro-localbus", + "fsl,pq3-localbus", + "fsl,elbc", +}; + +static int __init fsl_lbc_init(void) +{ + struct device_node *lbus; + int i; + + for (i = 0; i < ARRAY_SIZE(compat_lbc); i++) { + lbus = of_find_compatible_node(NULL, NULL, compat_lbc[i]); + if (lbus) + goto found; + } + return -ENODEV; + +found: + fsl_lbc_regs = of_iomap(lbus, 0); + of_node_put(lbus); + if (!fsl_lbc_regs) + return -ENOMEM; + return 0; +} +arch_initcall(fsl_lbc_init); + +/** + * fsl_lbc_find - find Localbus bank + * @addr_base: base address of the memory bank + * + * This function walks LBC banks comparing "Base address" field of the BR + * registers with the supplied addr_base argument. When bases match this + * function returns bank number (starting with 0), otherwise it returns + * appropriate errno value. + */ +int fsl_lbc_find(phys_addr_t addr_base) +{ + int i; + + if (!fsl_lbc_regs) + return -ENODEV; + + for (i = 0; i < ARRAY_SIZE(fsl_lbc_regs->bank); i++) { + __be32 br = in_be32(&fsl_lbc_regs->bank[i].br); + __be32 or = in_be32(&fsl_lbc_regs->bank[i].or); + + if (br & BR_V && (br & or & BR_BA) == addr_base) + return i; + } + + return -ENOENT; +} +EXPORT_SYMBOL(fsl_lbc_find); + +/** + * fsl_upm_find - find pre-programmed UPM via base address + * @addr_base: base address of the memory bank controlled by the UPM + * @upm: pointer to the allocated fsl_upm structure + * + * This function fills fsl_upm structure so you can use it with the rest of + * UPM API. On success this function returns 0, otherwise it returns + * appropriate errno value. + */ +int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm) +{ + int bank; + __be32 br; + + bank = fsl_lbc_find(addr_base); + if (bank < 0) + return bank; + + br = in_be32(&fsl_lbc_regs->bank[bank].br); + + switch (br & BR_MSEL) { + case BR_MS_UPMA: + upm->mxmr = &fsl_lbc_regs->mamr; + break; + case BR_MS_UPMB: + upm->mxmr = &fsl_lbc_regs->mbmr; + break; + case BR_MS_UPMC: + upm->mxmr = &fsl_lbc_regs->mcmr; + break; + default: + return -EINVAL; + } + + switch (br & BR_PS) { + case BR_PS_8: + upm->width = 8; + break; + case BR_PS_16: + upm->width = 16; + break; + case BR_PS_32: + upm->width = 32; + break; + default: + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL(fsl_upm_find); diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 3581416905e..5c1b246aacc 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -75,6 +75,33 @@ phys_addr_t get_immrbase(void) EXPORT_SYMBOL(get_immrbase); +static u32 sysfreq = -1; + +u32 fsl_get_sys_freq(void) +{ + struct device_node *soc; + const u32 *prop; + int size; + + if (sysfreq != -1) + return sysfreq; + + soc = of_find_node_by_type(NULL, "soc"); + if (!soc) + return -1; + + prop = of_get_property(soc, "clock-frequency", &size); + if (!prop || size != sizeof(*prop) || *prop == 0) + prop = of_get_property(soc, "bus-frequency", &size); + + if (prop && size == sizeof(*prop)) + sysfreq = *prop; + + of_node_put(soc); + return sysfreq; +} +EXPORT_SYMBOL(fsl_get_sys_freq); + #if defined(CONFIG_CPM2) || defined(CONFIG_QUICC_ENGINE) || defined(CONFIG_8xx) static u32 brgfreq = -1; @@ -517,9 +544,9 @@ arch_initcall(fsl_i2c_of_init); static int __init mpc83xx_wdt_init(void) { struct resource r; - struct device_node *soc, *np; + struct device_node *np; struct platform_device *dev; - const unsigned int *freq; + u32 freq = fsl_get_sys_freq(); int ret; np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt"); @@ -529,19 +556,6 @@ static int __init mpc83xx_wdt_init(void) goto nodev; } - soc = of_find_node_by_type(NULL, "soc"); - - if (!soc) { - ret = -ENODEV; - goto nosoc; - } - - freq = of_get_property(soc, "bus-frequency", NULL); - if (!freq) { - ret = -ENODEV; - goto err; - } - memset(&r, 0, sizeof(r)); ret = of_address_to_resource(np, 0, &r); @@ -554,20 +568,16 @@ static int __init mpc83xx_wdt_init(void) goto err; } - ret = platform_device_add_data(dev, freq, sizeof(int)); + ret = platform_device_add_data(dev, &freq, sizeof(freq)); if (ret) goto unreg; - of_node_put(soc); of_node_put(np); - return 0; unreg: platform_device_unregister(dev); err: - of_node_put(soc); -nosoc: of_node_put(np); nodev: return ret; @@ -736,547 +746,6 @@ err: arch_initcall(fsl_usb_of_init); -#ifndef CONFIG_PPC_CPM_NEW_BINDING -#ifdef CONFIG_CPM2 - -extern void init_scc_ioports(struct fs_uart_platform_info*); - -static const char fcc_regs[] = "fcc_regs"; -static const char fcc_regs_c[] = "fcc_regs_c"; -static const char fcc_pram[] = "fcc_pram"; -static char bus_id[9][BUS_ID_SIZE]; - -static int __init fs_enet_of_init(void) -{ - struct device_node *np; - unsigned int i; - struct platform_device *fs_enet_dev; - struct resource res; - int ret; - - for (np = NULL, i = 0; - (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL; - i++) { - struct resource r[4]; - struct device_node *phy, *mdio; - struct fs_platform_info fs_enet_data; - const unsigned int *id, *phy_addr, *phy_irq; - const void *mac_addr; - const phandle *ph; - const char *model; - - memset(r, 0, sizeof(r)); - memset(&fs_enet_data, 0, sizeof(fs_enet_data)); - - ret = of_address_to_resource(np, 0, &r[0]); - if (ret) - goto err; - r[0].name = fcc_regs; - - ret = of_address_to_resource(np, 1, &r[1]); - if (ret) - goto err; - r[1].name = fcc_pram; - - ret = of_address_to_resource(np, 2, &r[2]); - if (ret) - goto err; - r[2].name = fcc_regs_c; - fs_enet_data.fcc_regs_c = r[2].start; - - of_irq_to_resource(np, 0, &r[3]); - - fs_enet_dev = - platform_device_register_simple("fsl-cpm-fcc", i, &r[0], 4); - - if (IS_ERR(fs_enet_dev)) { - ret = PTR_ERR(fs_enet_dev); - goto err; - } - - model = of_get_property(np, "model", NULL); - if (model == NULL) { - ret = -ENODEV; - goto unreg; - } - - mac_addr = of_get_mac_address(np); - if (mac_addr) - memcpy(fs_enet_data.macaddr, mac_addr, 6); - - ph = of_get_property(np, "phy-handle", NULL); - phy = of_find_node_by_phandle(*ph); - - if (phy == NULL) { - ret = -ENODEV; - goto unreg; - } - - phy_addr = of_get_property(phy, "reg", NULL); - fs_enet_data.phy_addr = *phy_addr; - - phy_irq = of_get_property(phy, "interrupts", NULL); - - id = of_get_property(np, "device-id", NULL); - fs_enet_data.fs_no = *id; - strcpy(fs_enet_data.fs_type, model); - - mdio = of_get_parent(phy); - ret = of_address_to_resource(mdio, 0, &res); - if (ret) { - of_node_put(phy); - of_node_put(mdio); - goto unreg; - } - - fs_enet_data.clk_rx = *((u32 *)of_get_property(np, - "rx-clock", NULL)); - fs_enet_data.clk_tx = *((u32 *)of_get_property(np, - "tx-clock", NULL)); - - if (strstr(model, "FCC")) { - int fcc_index = *id - 1; - const unsigned char *mdio_bb_prop; - - fs_enet_data.dpram_offset = (u32)cpm_dpram_addr(0); - fs_enet_data.rx_ring = 32; - fs_enet_data.tx_ring = 32; - fs_enet_data.rx_copybreak = 240; - fs_enet_data.use_napi = 0; - fs_enet_data.napi_weight = 17; - fs_enet_data.mem_offset = FCC_MEM_OFFSET(fcc_index); - fs_enet_data.cp_page = CPM_CR_FCC_PAGE(fcc_index); - fs_enet_data.cp_block = CPM_CR_FCC_SBLOCK(fcc_index); - - snprintf((char*)&bus_id[(*id)], BUS_ID_SIZE, "%x:%02x", - (u32)res.start, fs_enet_data.phy_addr); - fs_enet_data.bus_id = (char*)&bus_id[(*id)]; - fs_enet_data.init_ioports = init_fcc_ioports; - - mdio_bb_prop = of_get_property(phy, "bitbang", NULL); - if (mdio_bb_prop) { - struct platform_device *fs_enet_mdio_bb_dev; - struct fs_mii_bb_platform_info fs_enet_mdio_bb_data; - - fs_enet_mdio_bb_dev = - platform_device_register_simple("fsl-bb-mdio", - i, NULL, 0); - memset(&fs_enet_mdio_bb_data, 0, - sizeof(struct fs_mii_bb_platform_info)); - fs_enet_mdio_bb_data.mdio_dat.bit = - mdio_bb_prop[0]; - fs_enet_mdio_bb_data.mdio_dir.bit = - mdio_bb_prop[1]; - fs_enet_mdio_bb_data.mdc_dat.bit = - mdio_bb_prop[2]; - fs_enet_mdio_bb_data.mdio_port = - mdio_bb_prop[3]; - fs_enet_mdio_bb_data.mdc_port = - mdio_bb_prop[4]; - fs_enet_mdio_bb_data.delay = - mdio_bb_prop[5]; - - fs_enet_mdio_bb_data.irq[0] = phy_irq[0]; - fs_enet_mdio_bb_data.irq[1] = -1; - fs_enet_mdio_bb_data.irq[2] = -1; - fs_enet_mdio_bb_data.irq[3] = phy_irq[0]; - fs_enet_mdio_bb_data.irq[31] = -1; - - fs_enet_mdio_bb_data.mdio_dat.offset = - (u32)&cpm2_immr->im_ioport.iop_pdatc; - fs_enet_mdio_bb_data.mdio_dir.offset = - (u32)&cpm2_immr->im_ioport.iop_pdirc; - fs_enet_mdio_bb_data.mdc_dat.offset = - (u32)&cpm2_immr->im_ioport.iop_pdatc; - - ret = platform_device_add_data( - fs_enet_mdio_bb_dev, - &fs_enet_mdio_bb_data, - sizeof(struct fs_mii_bb_platform_info)); - if (ret) - goto unreg; - } - - of_node_put(phy); - of_node_put(mdio); - - ret = platform_device_add_data(fs_enet_dev, &fs_enet_data, - sizeof(struct - fs_platform_info)); - if (ret) - goto unreg; - } - } - return 0; - -unreg: - platform_device_unregister(fs_enet_dev); -err: - return ret; -} - -arch_initcall(fs_enet_of_init); - -static const char scc_regs[] = "regs"; -static const char scc_pram[] = "pram"; - -static int __init cpm_uart_of_init(void) -{ - struct device_node *np; - unsigned int i; - struct platform_device *cpm_uart_dev; - int ret; - - for (np = NULL, i = 0; - (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL; - i++) { - struct resource r[3]; - struct fs_uart_platform_info cpm_uart_data; - const int *id; - const char *model; - - memset(r, 0, sizeof(r)); - memset(&cpm_uart_data, 0, sizeof(cpm_uart_data)); - - ret = of_address_to_resource(np, 0, &r[0]); - if (ret) - goto err; - - r[0].name = scc_regs; - - ret = of_address_to_resource(np, 1, &r[1]); - if (ret) - goto err; - r[1].name = scc_pram; - - of_irq_to_resource(np, 0, &r[2]); - - cpm_uart_dev = - platform_device_register_simple("fsl-cpm-scc:uart", i, &r[0], 3); - - if (IS_ERR(cpm_uart_dev)) { - ret = PTR_ERR(cpm_uart_dev); - goto err; - } - - id = of_get_property(np, "device-id", NULL); - cpm_uart_data.fs_no = *id; - - model = of_get_property(np, "model", NULL); - strcpy(cpm_uart_data.fs_type, model); - - cpm_uart_data.uart_clk = ppc_proc_freq; - - cpm_uart_data.tx_num_fifo = 4; - cpm_uart_data.tx_buf_size = 32; - cpm_uart_data.rx_num_fifo = 4; - cpm_uart_data.rx_buf_size = 32; - cpm_uart_data.clk_rx = *((u32 *)of_get_property(np, - "rx-clock", NULL)); - cpm_uart_data.clk_tx = *((u32 *)of_get_property(np, - "tx-clock", NULL)); - - ret = - platform_device_add_data(cpm_uart_dev, &cpm_uart_data, - sizeof(struct - fs_uart_platform_info)); - if (ret) - goto unreg; - } - - return 0; - -unreg: - platform_device_unregister(cpm_uart_dev); -err: - return ret; -} - -arch_initcall(cpm_uart_of_init); -#endif /* CONFIG_CPM2 */ - -#ifdef CONFIG_8xx - -extern void init_scc_ioports(struct fs_platform_info*); -extern int platform_device_skip(const char *model, int id); - -static int __init fs_enet_mdio_of_init(void) -{ - struct device_node *np; - unsigned int i; - struct platform_device *mdio_dev; - struct resource res; - int ret; - - for (np = NULL, i = 0; - (np = of_find_compatible_node(np, "mdio", "fs_enet")) != NULL; - i++) { - struct fs_mii_fec_platform_info mdio_data; - - memset(&res, 0, sizeof(res)); - memset(&mdio_data, 0, sizeof(mdio_data)); - - ret = of_address_to_resource(np, 0, &res); - if (ret) - goto err; - - mdio_dev = - platform_device_register_simple("fsl-cpm-fec-mdio", - res.start, &res, 1); - if (IS_ERR(mdio_dev)) { - ret = PTR_ERR(mdio_dev); - goto err; - } - - mdio_data.mii_speed = ((((ppc_proc_freq + 4999999) / 2500000) / 2) & 0x3F) << 1; - - ret = - platform_device_add_data(mdio_dev, &mdio_data, - sizeof(struct fs_mii_fec_platform_info)); - if (ret) - goto unreg; - } - return 0; - -unreg: - platform_device_unregister(mdio_dev); -err: - return ret; -} - -arch_initcall(fs_enet_mdio_of_init); - -static const char *enet_regs = "regs"; -static const char *enet_pram = "pram"; -static const char *enet_irq = "interrupt"; -static char bus_id[9][BUS_ID_SIZE]; - -static int __init fs_enet_of_init(void) -{ - struct device_node *np; - unsigned int i; - struct platform_device *fs_enet_dev = NULL; - struct resource res; - int ret; - - for (np = NULL, i = 0; - (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL; - i++) { - struct resource r[4]; - struct device_node *phy = NULL, *mdio = NULL; - struct fs_platform_info fs_enet_data; - const unsigned int *id; - const unsigned int *phy_addr; - const void *mac_addr; - const phandle *ph; - const char *model; - - memset(r, 0, sizeof(r)); - memset(&fs_enet_data, 0, sizeof(fs_enet_data)); - - model = of_get_property(np, "model", NULL); - if (model == NULL) { - ret = -ENODEV; - goto unreg; - } - - id = of_get_property(np, "device-id", NULL); - fs_enet_data.fs_no = *id; - - if (platform_device_skip(model, *id)) - continue; - - ret = of_address_to_resource(np, 0, &r[0]); - if (ret) - goto err; - r[0].name = enet_regs; - - mac_addr = of_get_mac_address(np); - if (mac_addr) - memcpy(fs_enet_data.macaddr, mac_addr, 6); - - ph = of_get_property(np, "phy-handle", NULL); - if (ph != NULL) - phy = of_find_node_by_phandle(*ph); - - if (phy != NULL) { - phy_addr = of_get_property(phy, "reg", NULL); - fs_enet_data.phy_addr = *phy_addr; - fs_enet_data.has_phy = 1; - - mdio = of_get_parent(phy); - ret = of_address_to_resource(mdio, 0, &res); - if (ret) { - of_node_put(phy); - of_node_put(mdio); - goto unreg; - } - } - - model = of_get_property(np, "model", NULL); - strcpy(fs_enet_data.fs_type, model); - - if (strstr(model, "FEC")) { - r[1].start = r[1].end = irq_of_parse_and_map(np, 0); - r[1].flags = IORESOURCE_IRQ; - r[1].name = enet_irq; - - fs_enet_dev = - platform_device_register_simple("fsl-cpm-fec", i, &r[0], 2); - - if (IS_ERR(fs_enet_dev)) { - ret = PTR_ERR(fs_enet_dev); - goto err; - } - - fs_enet_data.rx_ring = 128; - fs_enet_data.tx_ring = 16; - fs_enet_data.rx_copybreak = 240; - fs_enet_data.use_napi = 1; - fs_enet_data.napi_weight = 17; - - snprintf((char*)&bus_id[i], BUS_ID_SIZE, "%x:%02x", - (u32)res.start, fs_enet_data.phy_addr); - fs_enet_data.bus_id = (char*)&bus_id[i]; - fs_enet_data.init_ioports = init_fec_ioports; - } - if (strstr(model, "SCC")) { - ret = of_address_to_resource(np, 1, &r[1]); - if (ret) - goto err; - r[1].name = enet_pram; - - r[2].start = r[2].end = irq_of_parse_and_map(np, 0); - r[2].flags = IORESOURCE_IRQ; - r[2].name = enet_irq; - - fs_enet_dev = - platform_device_register_simple("fsl-cpm-scc", i, &r[0], 3); - - if (IS_ERR(fs_enet_dev)) { - ret = PTR_ERR(fs_enet_dev); - goto err; - } - - fs_enet_data.rx_ring = 64; - fs_enet_data.tx_ring = 8; - fs_enet_data.rx_copybreak = 240; - fs_enet_data.use_napi = 1; - fs_enet_data.napi_weight = 17; - - snprintf((char*)&bus_id[i], BUS_ID_SIZE, "%s", "fixed@10:1"); - fs_enet_data.bus_id = (char*)&bus_id[i]; - fs_enet_data.init_ioports = init_scc_ioports; - } - - of_node_put(phy); - of_node_put(mdio); - - ret = platform_device_add_data(fs_enet_dev, &fs_enet_data, - sizeof(struct - fs_platform_info)); - if (ret) - goto unreg; - } - return 0; - -unreg: - platform_device_unregister(fs_enet_dev); -err: - return ret; -} - -arch_initcall(fs_enet_of_init); - -static int __init fsl_pcmcia_of_init(void) -{ - struct device_node *np; - /* - * Register all the devices which type is "pcmcia" - */ - for_each_compatible_node(np, "pcmcia", "fsl,pq-pcmcia") - of_platform_device_create(np, "m8xx-pcmcia", NULL); - return 0; -} - -arch_initcall(fsl_pcmcia_of_init); - -static const char *smc_regs = "regs"; -static const char *smc_pram = "pram"; - -static int __init cpm_smc_uart_of_init(void) -{ - struct device_node *np; - unsigned int i; - struct platform_device *cpm_uart_dev; - int ret; - - for (np = NULL, i = 0; - (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL; - i++) { - struct resource r[3]; - struct fs_uart_platform_info cpm_uart_data; - const int *id; - const char *model; - - memset(r, 0, sizeof(r)); - memset(&cpm_uart_data, 0, sizeof(cpm_uart_data)); - - ret = of_address_to_resource(np, 0, &r[0]); - if (ret) - goto err; - - r[0].name = smc_regs; - - ret = of_address_to_resource(np, 1, &r[1]); - if (ret) - goto err; - r[1].name = smc_pram; - - r[2].start = r[2].end = irq_of_parse_and_map(np, 0); - r[2].flags = IORESOURCE_IRQ; - - cpm_uart_dev = - platform_device_register_simple("fsl-cpm-smc:uart", i, &r[0], 3); - - if (IS_ERR(cpm_uart_dev)) { - ret = PTR_ERR(cpm_uart_dev); - goto err; - } - - model = of_get_property(np, "model", NULL); - strcpy(cpm_uart_data.fs_type, model); - - id = of_get_property(np, "device-id", NULL); - cpm_uart_data.fs_no = *id; - cpm_uart_data.uart_clk = ppc_proc_freq; - - cpm_uart_data.tx_num_fifo = 4; - cpm_uart_data.tx_buf_size = 32; - cpm_uart_data.rx_num_fifo = 4; - cpm_uart_data.rx_buf_size = 32; - - ret = - platform_device_add_data(cpm_uart_dev, &cpm_uart_data, - sizeof(struct - fs_uart_platform_info)); - if (ret) - goto unreg; - } - - return 0; - -unreg: - platform_device_unregister(cpm_uart_dev); -err: - return ret; -} - -arch_initcall(cpm_smc_uart_of_init); - -#endif /* CONFIG_8xx */ -#endif /* CONFIG_PPC_CPM_NEW_BINDING */ - static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk, struct spi_board_info *board_infos, unsigned int num_board_infos, @@ -1372,25 +841,9 @@ int __init fsl_spi_init(struct spi_board_info *board_infos, sysclk = get_brgfreq(); #endif if (sysclk == -1) { - struct device_node *np; - const u32 *freq; - int size; - - np = of_find_node_by_type(NULL, "soc"); - if (!np) + sysclk = fsl_get_sys_freq(); + if (sysclk == -1) return -ENODEV; - - freq = of_get_property(np, "clock-frequency", &size); - if (!freq || size != sizeof(*freq) || *freq == 0) { - freq = of_get_property(np, "bus-frequency", &size); - if (!freq || size != sizeof(*freq) || *freq == 0) { - of_node_put(np); - return -ENODEV; - } - } - - sysclk = *freq; - of_node_put(np); } ret = of_fsl_spi_probe(NULL, "fsl,spi", sysclk, board_infos, diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h index 63e7db30a4c..74c4a9657b3 100644 --- a/arch/powerpc/sysdev/fsl_soc.h +++ b/arch/powerpc/sysdev/fsl_soc.h @@ -7,6 +7,7 @@ extern phys_addr_t get_immrbase(void); extern u32 get_brgfreq(void); extern u32 get_baudrate(void); +extern u32 fsl_get_sys_freq(void); struct spi_board_info; diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 6ffdda244bb..8619f2a3f1f 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -175,13 +175,16 @@ static inline void _mpic_write(enum mpic_reg_type type, switch(type) { #ifdef CONFIG_PPC_DCR case mpic_access_dcr: - return dcr_write(rb->dhost, reg, value); + dcr_write(rb->dhost, reg, value); + break; #endif case mpic_access_mmio_be: - return out_be32(rb->base + (reg >> 2), value); + out_be32(rb->base + (reg >> 2), value); + break; case mpic_access_mmio_le: default: - return out_le32(rb->base + (reg >> 2), value); + out_le32(rb->base + (reg >> 2), value); + break; } } @@ -1000,7 +1003,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, const char *name) { struct mpic *mpic; - u32 reg; + u32 greg_feature; const char *vers; int i; int intvec_top; @@ -1064,7 +1067,8 @@ struct mpic * __init mpic_alloc(struct device_node *node, /* Look for protected sources */ if (node) { - unsigned int psize, bits, mapsize; + int psize; + unsigned int bits, mapsize; const u32 *psrc = of_get_property(node, "protected-sources", &psize); if (psrc) { @@ -1107,8 +1111,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, * in, try to obtain one */ if (paddr == 0 && !(mpic->flags & MPIC_USES_DCR)) { - const u32 *reg; - reg = of_get_property(node, "reg", NULL); + const u32 *reg = of_get_property(node, "reg", NULL); BUG_ON(reg == NULL); paddr = of_translate_address(node, reg); BUG_ON(paddr == OF_BAD_ADDR); @@ -1137,12 +1140,13 @@ struct mpic * __init mpic_alloc(struct device_node *node, * MPICs, num sources as well. On ISU MPICs, sources are counted * as ISUs are added */ - reg = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0)); - mpic->num_cpus = ((reg & MPIC_GREG_FEATURE_LAST_CPU_MASK) + greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0)); + mpic->num_cpus = ((greg_feature & MPIC_GREG_FEATURE_LAST_CPU_MASK) >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1; if (isu_size == 0) - mpic->num_sources = ((reg & MPIC_GREG_FEATURE_LAST_SRC_MASK) - >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1; + mpic->num_sources = + ((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK) + >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1; /* Map the per-CPU registers */ for (i = 0; i < mpic->num_cpus; i++) { @@ -1161,7 +1165,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->isu_mask = (1 << mpic->isu_shift) - 1; /* Display version */ - switch (reg & MPIC_GREG_FEATURE_VERSION_MASK) { + switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) { case 1: vers = "1.0"; break; @@ -1321,7 +1325,7 @@ void __init mpic_set_serial_int(struct mpic *mpic, int enable) void mpic_irq_set_priority(unsigned int irq, unsigned int pri) { - int is_ipi; + unsigned int is_ipi; struct mpic *mpic = mpic_find(irq, &is_ipi); unsigned int src = mpic_irq_to_hw(irq); unsigned long flags; @@ -1344,7 +1348,7 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri) unsigned int mpic_irq_get_priority(unsigned int irq) { - int is_ipi; + unsigned int is_ipi; struct mpic *mpic = mpic_find(irq, &is_ipi); unsigned int src = mpic_irq_to_hw(irq); unsigned long flags; @@ -1406,11 +1410,6 @@ void mpic_cpu_set_priority(int prio) mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), prio); } -/* - * XXX: someone who knows mpic should check this. - * do we need to eoi the ipi including for kexec cpu here (see xics comments)? - * or can we reset the mpic in the new kernel? - */ void mpic_teardown_this_cpu(int secondary) { struct mpic *mpic = mpic_primary; @@ -1430,6 +1429,10 @@ void mpic_teardown_this_cpu(int secondary) /* Set current processor priority to max */ mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf); + /* We need to EOI the IPI since not all platforms reset the MPIC + * on boot and new interrupts wouldn't get delivered otherwise. + */ + mpic_eoi(mpic); spin_unlock_irqrestore(&mpic_lock, flags); } diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c index efda0028909..047b31027fa 100644 --- a/arch/powerpc/sysdev/mv64x60_dev.c +++ b/arch/powerpc/sysdev/mv64x60_dev.c @@ -127,7 +127,7 @@ static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id) if (err) return err; - prop = of_get_property(np, "block-index", NULL); + prop = of_get_property(np, "cell-index", NULL); if (!prop) return -ENODEV; port_number = *(int *)prop; @@ -136,6 +136,7 @@ static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id) pdata.cache_mgmt = 1; /* All current revs need this set */ + pdata.max_idle = 40; /* default */ prop = of_get_property(np, "max_idle", NULL); if (prop) pdata.max_idle = *prop; @@ -205,30 +206,24 @@ error: /* * Create mv64x60_eth platform devices */ -static int __init eth_register_shared_pdev(struct device_node *np) +static struct platform_device * __init mv64x60_eth_register_shared_pdev( + struct device_node *np, int id) { struct platform_device *pdev; struct resource r[1]; int err; - np = of_get_parent(np); - if (!np) - return -ENODEV; - err = of_address_to_resource(np, 0, &r[0]); - of_node_put(np); if (err) - return err; + return ERR_PTR(err); - pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, 0, + pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, id, r, 1); - if (IS_ERR(pdev)) - return PTR_ERR(pdev); - - return 0; + return pdev; } -static int __init mv64x60_eth_device_setup(struct device_node *np, int id) +static int __init mv64x60_eth_device_setup(struct device_node *np, int id, + struct platform_device *shared_pdev) { struct resource r[1]; struct mv643xx_eth_platform_data pdata; @@ -239,16 +234,12 @@ static int __init mv64x60_eth_device_setup(struct device_node *np, int id) const phandle *ph; int err; - /* only register the shared platform device the first time through */ - if (id == 0 && (err = eth_register_shared_pdev(np))) - return err; - memset(r, 0, sizeof(r)); of_irq_to_resource(np, 0, &r[0]); memset(&pdata, 0, sizeof(pdata)); - prop = of_get_property(np, "block-index", NULL); + prop = of_get_property(np, "reg", NULL); if (!prop) return -ENODEV; pdata.port_number = *prop; @@ -301,7 +292,7 @@ static int __init mv64x60_eth_device_setup(struct device_node *np, int id) of_node_put(phy); - pdev = platform_device_alloc(MV643XX_ETH_NAME, pdata.port_number); + pdev = platform_device_alloc(MV643XX_ETH_NAME, id); if (!pdev) return -ENOMEM; @@ -345,21 +336,19 @@ static int __init mv64x60_i2c_device_setup(struct device_node *np, int id) memset(&pdata, 0, sizeof(pdata)); + pdata.freq_m = 8; /* default */ prop = of_get_property(np, "freq_m", NULL); if (!prop) return -ENODEV; pdata.freq_m = *prop; + pdata.freq_m = 3; /* default */ prop = of_get_property(np, "freq_n", NULL); if (!prop) return -ENODEV; pdata.freq_n = *prop; - prop = of_get_property(np, "timeout", NULL); - if (prop) - pdata.timeout = *prop; - else - pdata.timeout = 1000; /* 1 second */ + pdata.timeout = 1000; /* default: 1 second */ pdev = platform_device_alloc(MV64XXX_I2C_CTLR_NAME, id); if (!pdev) @@ -401,10 +390,7 @@ static int __init mv64x60_wdt_device_setup(struct device_node *np, int id) memset(&pdata, 0, sizeof(pdata)); - prop = of_get_property(np, "timeout", NULL); - if (!prop) - return -ENODEV; - pdata.timeout = *prop; + pdata.timeout = 10; /* Default: 10 seconds */ np = of_get_parent(np); if (!np) @@ -441,27 +427,43 @@ error: static int __init mv64x60_device_setup(void) { - struct device_node *np = NULL; - int id; + struct device_node *np, *np2; + struct platform_device *pdev; + int id, id2; int err; id = 0; - for_each_compatible_node(np, "serial", "marvell,mpsc") + for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc") if ((err = mv64x60_mpsc_device_setup(np, id++))) goto error; id = 0; - for_each_compatible_node(np, "network", "marvell,mv64x60-eth") - if ((err = mv64x60_eth_device_setup(np, id++))) + id2 = 0; + for_each_compatible_node(np, NULL, "marvell,mv64360-eth-group") { + pdev = mv64x60_eth_register_shared_pdev(np, id++); + if (IS_ERR(pdev)) { + err = PTR_ERR(pdev); goto error; + } + for_each_child_of_node(np, np2) { + if (!of_device_is_compatible(np2, + "marvell,mv64360-eth")) + continue; + err = mv64x60_eth_device_setup(np2, id2++, pdev); + if (err) { + of_node_put(np2); + goto error; + } + } + } id = 0; - for_each_compatible_node(np, "i2c", "marvell,mv64x60-i2c") + for_each_compatible_node(np, "i2c", "marvell,mv64360-i2c") if ((err = mv64x60_i2c_device_setup(np, id++))) goto error; /* support up to one watchdog timer */ - np = of_find_compatible_node(np, NULL, "marvell,mv64x60-wdt"); + np = of_find_compatible_node(np, NULL, "marvell,mv64360-wdt"); if (np) { if ((err = mv64x60_wdt_device_setup(np, id))) goto error; @@ -489,10 +491,10 @@ static int __init mv64x60_add_mpsc_console(void) if (!np) goto not_mpsc; - if (!of_device_is_compatible(np, "marvell,mpsc")) + if (!of_device_is_compatible(np, "marvell,mv64360-mpsc")) goto not_mpsc; - prop = of_get_property(np, "block-index", NULL); + prop = of_get_property(np, "cell-index", NULL); if (!prop) goto not_mpsc; diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c index d21ab8fa499..1456015a22d 100644 --- a/arch/powerpc/sysdev/mv64x60_pci.c +++ b/arch/powerpc/sysdev/mv64x60_pci.c @@ -86,14 +86,14 @@ static int __init mv64x60_sysfs_init(void) struct platform_device *pdev; const unsigned int *prop; - np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60"); + np = of_find_compatible_node(NULL, NULL, "marvell,mv64360"); if (!np) return 0; prop = of_get_property(np, "hs_reg_valid", NULL); of_node_put(np); - pdev = platform_device_register_simple("marvell,mv64x60", 0, NULL, 0); + pdev = platform_device_register_simple("marvell,mv64360", 0, NULL, 0); if (IS_ERR(pdev)) return PTR_ERR(pdev); @@ -166,6 +166,6 @@ void __init mv64x60_pci_init(void) { struct device_node *np; - for_each_compatible_node(np, "pci", "marvell,mv64x60-pci") + for_each_compatible_node(np, "pci", "marvell,mv64360-pci") mv64x60_add_bridge(np); } diff --git a/arch/powerpc/sysdev/mv64x60_pic.c b/arch/powerpc/sysdev/mv64x60_pic.c index 19e6ef26379..2aa4ed066db 100644 --- a/arch/powerpc/sysdev/mv64x60_pic.c +++ b/arch/powerpc/sysdev/mv64x60_pic.c @@ -238,13 +238,13 @@ void __init mv64x60_init_irq(void) const unsigned int *reg; unsigned long flags; - np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp"); + np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp"); reg = of_get_property(np, "reg", &size); paddr = of_translate_address(np, reg); mv64x60_gpp_reg_base = ioremap(paddr, reg[1]); of_node_put(np); - np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-pic"); + np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-pic"); reg = of_get_property(np, "reg", &size); paddr = of_translate_address(np, reg); mv64x60_irq_reg_base = ioremap(paddr, reg[1]); diff --git a/arch/powerpc/sysdev/mv64x60_udbg.c b/arch/powerpc/sysdev/mv64x60_udbg.c index 35c77c7d061..ccdb3b0418f 100644 --- a/arch/powerpc/sysdev/mv64x60_udbg.c +++ b/arch/powerpc/sysdev/mv64x60_udbg.c @@ -85,7 +85,7 @@ static void mv64x60_udbg_init(void) if (!stdout) return; - for_each_compatible_node(np, "serial", "marvell,mpsc") { + for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc") { if (np == stdout) break; } diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 5abfcd15748..1814adbd223 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -527,6 +527,7 @@ static void __init ppc4xx_probe_pcix_bridge(struct device_node *np) * * ibm,plb-pciex-440spe * ibm,plb-pciex-405ex + * ibm,plb-pciex-460ex * * Anything else will be rejected for now as they are all subtly * different unfortunately. @@ -645,7 +646,7 @@ static int __init ppc440spe_pciex_core_init(struct device_node *np) int time_out = 20; /* Set PLL clock receiver to LVPECL */ - mtdcri(SDR0, PESDR0_PLLLCT1, mfdcri(SDR0, PESDR0_PLLLCT1) | 1 << 28); + dcri_clrset(SDR0, PESDR0_PLLLCT1, 0, 1 << 28); /* Shouldn't we do all the calibration stuff etc... here ? */ if (ppc440spe_pciex_check_reset(np)) @@ -659,8 +660,7 @@ static int __init ppc440spe_pciex_core_init(struct device_node *np) } /* De-assert reset of PCIe PLL, wait for lock */ - mtdcri(SDR0, PESDR0_PLLLCT1, - mfdcri(SDR0, PESDR0_PLLLCT1) & ~(1 << 24)); + dcri_clrset(SDR0, PESDR0_PLLLCT1, 1 << 24, 0); udelay(3); while (time_out) { @@ -712,9 +712,8 @@ static int ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port) mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL7SET1, 0x35000000); } - val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET); - mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, - (val & ~(1 << 24 | 1 << 16)) | 1 << 12); + dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, + (1 << 24) | (1 << 16), 1 << 12); return 0; } @@ -775,6 +774,115 @@ static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata = .setup_utl = ppc440speB_pciex_init_utl, }; +static int __init ppc460ex_pciex_core_init(struct device_node *np) +{ + /* Nothing to do, return 2 ports */ + return 2; +} + +static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +{ + u32 val; + u32 utlset1; + + if (port->endpoint) + val = PTYPE_LEGACY_ENDPOINT << 20; + else + val = PTYPE_ROOT_PORT << 20; + + if (port->index == 0) { + val |= LNKW_X1 << 12; + utlset1 = 0x20000000; + } else { + val |= LNKW_X4 << 12; + utlset1 = 0x20101101; + } + + mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val); + mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, utlset1); + mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01210000); + + switch (port->index) { + case 0: + mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230); + mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000136); + mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006); + + mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST,0x10000000); + break; + + case 1: + mtdcri(SDR0, PESDR1_460EX_L0CDRCTL, 0x00003230); + mtdcri(SDR0, PESDR1_460EX_L1CDRCTL, 0x00003230); + mtdcri(SDR0, PESDR1_460EX_L2CDRCTL, 0x00003230); + mtdcri(SDR0, PESDR1_460EX_L3CDRCTL, 0x00003230); + mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000136); + mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000136); + mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000136); + mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000136); + mtdcri(SDR0, PESDR1_460EX_L0CLK, 0x00000006); + mtdcri(SDR0, PESDR1_460EX_L1CLK, 0x00000006); + mtdcri(SDR0, PESDR1_460EX_L2CLK, 0x00000006); + mtdcri(SDR0, PESDR1_460EX_L3CLK, 0x00000006); + + mtdcri(SDR0, PESDR1_460EX_PHY_CTL_RST,0x10000000); + break; + } + + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, + mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | + (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN)); + + /* Poll for PHY reset */ + /* XXX FIXME add timeout */ + switch (port->index) { + case 0: + while (!(mfdcri(SDR0, PESDR0_460EX_RSTSTA) & 0x1)) + udelay(10); + break; + case 1: + while (!(mfdcri(SDR0, PESDR1_460EX_RSTSTA) & 0x1)) + udelay(10); + break; + } + + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, + (mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) & + ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) | + PESDRx_RCSSET_RSTPYN); + + port->has_ibpre = 1; + + return 0; +} + +static int ppc460ex_pciex_init_utl(struct ppc4xx_pciex_port *port) +{ + dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0); + + /* + * Set buffer allocations and then assert VRB and TXE. + */ + out_be32(port->utl_base + PEUTL_PBCTL, 0x0800000c); + out_be32(port->utl_base + PEUTL_OUTTR, 0x08000000); + out_be32(port->utl_base + PEUTL_INTR, 0x02000000); + out_be32(port->utl_base + PEUTL_OPDBSZ, 0x04000000); + out_be32(port->utl_base + PEUTL_PBBSZ, 0x00000000); + out_be32(port->utl_base + PEUTL_IPHBSZ, 0x02000000); + out_be32(port->utl_base + PEUTL_IPDBSZ, 0x04000000); + out_be32(port->utl_base + PEUTL_RCIRQEN,0x00f00000); + out_be32(port->utl_base + PEUTL_PCTL, 0x80800066); + + return 0; +} + +static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata = +{ + .core_init = ppc460ex_pciex_core_init, + .port_init_hw = ppc460ex_pciex_init_port_hw, + .setup_utl = ppc460ex_pciex_init_utl, +}; + #endif /* CONFIG_44x */ #ifdef CONFIG_40x @@ -830,17 +938,9 @@ static int ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) * PCIe boards don't show this problem. * This has to be re-tested and fixed in a later release! */ -#if 0 /* XXX FIXME: Not resetting the PHY will leave all resources - * configured as done previously by U-Boot. Then Linux will currently - * not reassign them. So the PHY reset is now done always. This will - * lead to problems with the Atheros PCIe board again. - */ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP); if (!(val & 0x00001000)) ppc405ex_pcie_phy_reset(port); -#else - ppc405ex_pcie_phy_reset(port); -#endif dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000); /* guarded on */ @@ -896,6 +996,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np) else ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops; } + if (of_device_is_compatible(np, "ibm,plb-pciex-460ex")) + ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops; #endif /* CONFIG_44x */ #ifdef CONFIG_40x if (of_device_is_compatible(np, "ibm,plb-pciex-405ex")) @@ -1042,8 +1144,7 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) port->link = 0; } - mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, - mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | 1 << 20); + dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, 0, 1 << 20); msleep(100); return 0; diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h index 1c07908dc6e..d04e40b306f 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.h +++ b/arch/powerpc/sysdev/ppc4xx_pci.h @@ -271,6 +271,59 @@ #define PESDR1_405EX_PHYSTA 0x044C /* + * 460EX additional DCRs + */ +#define PESDR0_460EX_L0BIST 0x0308 +#define PESDR0_460EX_L0BISTSTS 0x0309 +#define PESDR0_460EX_L0CDRCTL 0x030A +#define PESDR0_460EX_L0DRV 0x030B +#define PESDR0_460EX_L0REC 0x030C +#define PESDR0_460EX_L0LPB 0x030D +#define PESDR0_460EX_L0CLK 0x030E +#define PESDR0_460EX_PHY_CTL_RST 0x030F +#define PESDR0_460EX_RSTSTA 0x0310 +#define PESDR0_460EX_OBS 0x0311 +#define PESDR0_460EX_L0ERRC 0x0320 + +#define PESDR1_460EX_L0BIST 0x0348 +#define PESDR1_460EX_L1BIST 0x0349 +#define PESDR1_460EX_L2BIST 0x034A +#define PESDR1_460EX_L3BIST 0x034B +#define PESDR1_460EX_L0BISTSTS 0x034C +#define PESDR1_460EX_L1BISTSTS 0x034D +#define PESDR1_460EX_L2BISTSTS 0x034E +#define PESDR1_460EX_L3BISTSTS 0x034F +#define PESDR1_460EX_L0CDRCTL 0x0350 +#define PESDR1_460EX_L1CDRCTL 0x0351 +#define PESDR1_460EX_L2CDRCTL 0x0352 +#define PESDR1_460EX_L3CDRCTL 0x0353 +#define PESDR1_460EX_L0DRV 0x0354 +#define PESDR1_460EX_L1DRV 0x0355 +#define PESDR1_460EX_L2DRV 0x0356 +#define PESDR1_460EX_L3DRV 0x0357 +#define PESDR1_460EX_L0REC 0x0358 +#define PESDR1_460EX_L1REC 0x0359 +#define PESDR1_460EX_L2REC 0x035A +#define PESDR1_460EX_L3REC 0x035B +#define PESDR1_460EX_L0LPB 0x035C +#define PESDR1_460EX_L1LPB 0x035D +#define PESDR1_460EX_L2LPB 0x035E +#define PESDR1_460EX_L3LPB 0x035F +#define PESDR1_460EX_L0CLK 0x0360 +#define PESDR1_460EX_L1CLK 0x0361 +#define PESDR1_460EX_L2CLK 0x0362 +#define PESDR1_460EX_L3CLK 0x0363 +#define PESDR1_460EX_PHY_CTL_RST 0x0364 +#define PESDR1_460EX_RSTSTA 0x0365 +#define PESDR1_460EX_OBS 0x0366 +#define PESDR1_460EX_L0ERRC 0x0368 +#define PESDR1_460EX_L1ERRC 0x0369 +#define PESDR1_460EX_L2ERRC 0x036A +#define PESDR1_460EX_L3ERRC 0x036B +#define PESDR0_460EX_IHS1 0x036C +#define PESDR0_460EX_IHS2 0x036D + +/* * Of the above, some are common offsets from the base */ #define PESDRn_UTLSET1 0x00 @@ -353,6 +406,12 @@ #define PECFG_POM2LAL 0x390 #define PECFG_POM2LAH 0x394 +/* SDR Bit Mappings */ +#define PESDRx_RCSSET_HLDPLB 0x10000000 +#define PESDRx_RCSSET_RSTGU 0x01000000 +#define PESDRx_RCSSET_RDY 0x00100000 +#define PESDRx_RCSSET_RSTDL 0x00010000 +#define PESDRx_RCSSET_RSTPYN 0x00001000 enum { diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c new file mode 100644 index 00000000000..5b32adc9a9b --- /dev/null +++ b/arch/powerpc/sysdev/ppc4xx_soc.c @@ -0,0 +1,200 @@ +/* + * IBM/AMCC PPC4xx SoC setup code + * + * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is: + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003 - 2006 Zultys Technologies + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/of_platform.h> + +#include <asm/dcr.h> +#include <asm/dcr-regs.h> +#include <asm/reg.h> + +static u32 dcrbase_l2c; + +/* + * L2-cache + */ + +/* Issue L2C diagnostic command */ +static inline u32 l2c_diag(u32 addr) +{ + mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr); + mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG); + while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC)) + ; + + return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA); +} + +static irqreturn_t l2c_error_handler(int irq, void *dev) +{ + u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR); + + if (sr & L2C_SR_CPE) { + /* Read cache trapped address */ + u32 addr = l2c_diag(0x42000000); + printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n", + addr); + } + if (sr & L2C_SR_TPE) { + /* Read tag trapped address */ + u32 addr = l2c_diag(0x82000000) >> 16; + printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n", + addr); + } + + /* Clear parity errors */ + if (sr & (L2C_SR_CPE | L2C_SR_TPE)){ + mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0); + mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE); + } else { + printk(KERN_EMERG "L2C: LRU error\n"); + } + + return IRQ_HANDLED; +} + +static int __init ppc4xx_l2c_probe(void) +{ + struct device_node *np; + u32 r; + unsigned long flags; + int irq; + const u32 *dcrreg; + u32 dcrbase_isram; + int len; + const u32 *prop; + u32 l2_size; + + np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache"); + if (!np) + return 0; + + /* Get l2 cache size */ + prop = of_get_property(np, "cache-size", NULL); + if (prop == NULL) { + printk(KERN_ERR "%s: Can't get cache-size!\n", np->full_name); + of_node_put(np); + return -ENODEV; + } + l2_size = prop[0]; + + /* Map DCRs */ + dcrreg = of_get_property(np, "dcr-reg", &len); + if (!dcrreg || (len != 4 * sizeof(u32))) { + printk(KERN_ERR "%s: Can't get DCR register base !", + np->full_name); + of_node_put(np); + return -ENODEV; + } + dcrbase_isram = dcrreg[0]; + dcrbase_l2c = dcrreg[2]; + + /* Get and map irq number from device tree */ + irq = irq_of_parse_and_map(np, 0); + if (irq == NO_IRQ) { + printk(KERN_ERR "irq_of_parse_and_map failed\n"); + of_node_put(np); + return -ENODEV; + } + + /* Install error handler */ + if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) { + printk(KERN_ERR "Cannot install L2C error handler" + ", cache is not enabled\n"); + of_node_put(np); + return -ENODEV; + } + + local_irq_save(flags); + asm volatile ("sync" ::: "memory"); + + /* Disable SRAM */ + mtdcr(dcrbase_isram + DCRN_SRAM0_DPC, + mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE); + mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR, + mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK); + mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR, + mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK); + mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR, + mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK); + mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR, + mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK); + + /* Enable L2_MODE without ICU/DCU */ + r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) & + ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK); + r |= L2C_CFG_L2M | L2C_CFG_SS_256; + mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r); + + mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0); + + /* Hardware Clear Command */ + mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC); + while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC)) + ; + + /* Clear Cache Parity and Tag Errors */ + mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE); + + /* Enable 64G snoop region starting at 0 */ + r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) & + ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK); + r |= L2C_SNP_SSR_32G | L2C_SNP_ESR; + mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r); + + r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) & + ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK); + r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR; + mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r); + + asm volatile ("sync" ::: "memory"); + + /* Enable ICU/DCU ports */ + r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG); + r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM + | L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM); + r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN + | L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM; + + /* Check for 460EX/GT special handling */ + if (of_device_is_compatible(np, "ibm,l2-cache-460ex")) + r |= L2C_CFG_RDBW; + + mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r); + + asm volatile ("sync; isync" ::: "memory"); + local_irq_restore(flags); + + printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10); + + of_node_put(np); + return 0; +} +arch_initcall(ppc4xx_l2c_probe); + +/* + * At present, this routine just applies a system reset. + */ +void ppc4xx_reset_system(char *cmd) +{ + mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_RST_SYSTEM); + while (1) + ; /* Just in case the reset doesn't work */ +} diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index cc81fd1141b..cff550eec7e 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -55,7 +55,7 @@ struct qe_snum { /* We allocate this here because it is used almost exclusively for * the communication processor devices. */ -struct qe_immap *qe_immr = NULL; +struct qe_immap __iomem *qe_immr; EXPORT_SYMBOL(qe_immr); static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */ @@ -156,7 +156,7 @@ EXPORT_SYMBOL(qe_issue_cmd); */ static unsigned int brg_clk = 0; -unsigned int get_brg_clk(void) +unsigned int qe_get_brg_clk(void) { struct device_node *qe; unsigned int size; @@ -180,6 +180,7 @@ unsigned int get_brg_clk(void) return brg_clk; } +EXPORT_SYMBOL(qe_get_brg_clk); /* Program the BRG to the given sampling rate and multiplier * @@ -197,7 +198,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier) if ((brg < QE_BRG1) || (brg > QE_BRG16)) return -EINVAL; - divisor = get_brg_clk() / (rate * multiplier); + divisor = qe_get_brg_clk() / (rate * multiplier); if (divisor > QE_BRGC_DIVISOR_MAX + 1) { div16 = QE_BRGC_DIV16; @@ -415,12 +416,6 @@ void qe_muram_dump(void) } EXPORT_SYMBOL(qe_muram_dump); -void *qe_muram_addr(unsigned long offset) -{ - return (void *)&qe_immr->muram[offset]; -} -EXPORT_SYMBOL(qe_muram_addr); - /* The maximum number of RISCs we support */ #define MAX_QE_RISC 2 diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c index e53ea4d374a..93916a48afe 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_io.c +++ b/arch/powerpc/sysdev/qe_lib/qe_io.c @@ -22,6 +22,7 @@ #include <linux/ioport.h> #include <asm/io.h> +#include <asm/qe.h> #include <asm/prom.h> #include <sysdev/fsl_soc.h> @@ -41,7 +42,7 @@ struct port_regs { #endif }; -static struct port_regs *par_io = NULL; +static struct port_regs __iomem *par_io; static int num_par_io_ports = 0; int par_io_init(struct device_node *np) @@ -165,7 +166,7 @@ int par_io_of_config(struct device_node *np) } ph = of_get_property(np, "pio-handle", NULL); - if (ph == 0) { + if (ph == NULL) { printk(KERN_ERR "pio-handle not available \n"); return -1; } @@ -200,7 +201,7 @@ static void dump_par_io(void) { unsigned int i; - printk(KERN_INFO "%s: par_io=%p\n", __FUNCTION__, par_io); + printk(KERN_INFO "%s: par_io=%p\n", __func__, par_io); for (i = 0; i < num_par_io_ports; i++) { printk(KERN_INFO " cpodr[%u]=%08x\n", i, in_be32(&par_io[i].cpodr)); diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c index 3223acbc39e..bcf88e6ce96 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c @@ -148,57 +148,57 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* check if the UCC port number is in range. */ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { - printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__); + printk(KERN_ERR "%s: illegal UCC number\n", __func__); return -EINVAL; } /* Check that 'max_rx_buf_length' is properly aligned (4). */ if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) { printk(KERN_ERR "%s: max_rx_buf_length not aligned\n", - __FUNCTION__); + __func__); return -EINVAL; } /* Validate Virtual Fifo register values */ if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) { - printk(KERN_ERR "%s: urfs is too small\n", __FUNCTION__); + printk(KERN_ERR "%s: urfs is too small\n", __func__); return -EINVAL; } if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: urfs is not aligned\n", __FUNCTION__); + printk(KERN_ERR "%s: urfs is not aligned\n", __func__); return -EINVAL; } if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: urfet is not aligned.\n", __FUNCTION__); + printk(KERN_ERR "%s: urfet is not aligned.\n", __func__); return -EINVAL; } if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: urfset is not aligned\n", __FUNCTION__); + printk(KERN_ERR "%s: urfset is not aligned\n", __func__); return -EINVAL; } if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: utfs is not aligned\n", __FUNCTION__); + printk(KERN_ERR "%s: utfs is not aligned\n", __func__); return -EINVAL; } if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: utfet is not aligned\n", __FUNCTION__); + printk(KERN_ERR "%s: utfet is not aligned\n", __func__); return -EINVAL; } if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: utftt is not aligned\n", __FUNCTION__); + printk(KERN_ERR "%s: utftt is not aligned\n", __func__); return -EINVAL; } uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL); if (!uccf) { printk(KERN_ERR "%s: Cannot allocate private data\n", - __FUNCTION__); + __func__); return -ENOMEM; } @@ -207,7 +207,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* Set the PHY base address */ uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast)); if (uccf->uf_regs == NULL) { - printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__); + printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__); return -ENOMEM; } @@ -230,7 +230,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* Set UCC to fast type */ ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST); if (ret) { - printk(KERN_ERR "%s: cannot set UCC type\n", __FUNCTION__); + printk(KERN_ERR "%s: cannot set UCC type\n", __func__); ucc_fast_free(uccf); return ret; } @@ -270,7 +270,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) { printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n", - __FUNCTION__); + __func__); uccf->ucc_fast_tx_virtual_fifo_base_offset = 0; ucc_fast_free(uccf); return -ENOMEM; @@ -283,7 +283,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) { printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n", - __FUNCTION__); + __func__); uccf->ucc_fast_rx_virtual_fifo_base_offset = 0; ucc_fast_free(uccf); return -ENOMEM; @@ -314,7 +314,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock, COMM_DIR_RX)) { printk(KERN_ERR "%s: illegal value for RX clock\n", - __FUNCTION__); + __func__); ucc_fast_free(uccf); return -EINVAL; } @@ -323,7 +323,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock, COMM_DIR_TX)) { printk(KERN_ERR "%s: illegal value for TX clock\n", - __FUNCTION__); + __func__); ucc_fast_free(uccf); return -EINVAL; } diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index b2870b208dd..a578bc77b9d 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -142,7 +142,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* check if the UCC port number is in range. */ if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) { - printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__); + printk(KERN_ERR "%s: illegal UCC number\n", __func__); return -EINVAL; } @@ -161,7 +161,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL); if (!uccs) { printk(KERN_ERR "%s: Cannot allocate private data\n", - __FUNCTION__); + __func__); return -ENOMEM; } @@ -170,7 +170,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Set the PHY base address */ uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow)); if (uccs->us_regs == NULL) { - printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__); + printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__); return -ENOMEM; } @@ -189,7 +189,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc uccs->us_pram_offset = qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM); if (IS_ERR_VALUE(uccs->us_pram_offset)) { - printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __FUNCTION__); + printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__); ucc_slow_free(uccs); return -ENOMEM; } @@ -202,7 +202,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Set UCC to slow type */ ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW); if (ret) { - printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__); + printk(KERN_ERR "%s: cannot set UCC type", __func__); ucc_slow_free(uccs); return ret; } @@ -216,7 +216,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd), QE_ALIGNMENT_OF_BD); if (IS_ERR_VALUE(uccs->rx_base_offset)) { - printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __FUNCTION__, + printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__, us_info->rx_bd_ring_len); uccs->rx_base_offset = 0; ucc_slow_free(uccs); @@ -227,7 +227,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd), QE_ALIGNMENT_OF_BD); if (IS_ERR_VALUE(uccs->tx_base_offset)) { - printk(KERN_ERR "%s: cannot allocate TX BDs", __FUNCTION__); + printk(KERN_ERR "%s: cannot allocate TX BDs", __func__); uccs->tx_base_offset = 0; ucc_slow_free(uccs); return -ENOMEM; @@ -317,7 +317,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) { printk(KERN_ERR "%s: illegal value for RX clock\n", - __FUNCTION__); + __func__); ucc_slow_free(uccs); return -EINVAL; } @@ -325,7 +325,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock, COMM_DIR_TX)) { printk(KERN_ERR "%s: illegal value for TX clock\n", - __FUNCTION__); + __func__); ucc_slow_free(uccs); return -EINVAL; } diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c index 0c9ac7ee08f..c09ddc0dbeb 100644 --- a/arch/powerpc/sysdev/rtc_cmos_setup.c +++ b/arch/powerpc/sysdev/rtc_cmos_setup.c @@ -56,3 +56,5 @@ static int __init add_rtc(void) return 0; } fs_initcall(add_rtc); + +MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c index be2808a292f..d4d15aaf18f 100644 --- a/arch/powerpc/sysdev/tsi108_dev.c +++ b/arch/powerpc/sysdev/tsi108_dev.c @@ -84,7 +84,7 @@ static int __init tsi108_eth_of_init(void) ret = of_address_to_resource(np, 0, &r[0]); DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n", - __FUNCTION__,r[0].name, r[0].start, r[0].end); + __func__,r[0].name, r[0].start, r[0].end); if (ret) goto err; @@ -93,7 +93,7 @@ static int __init tsi108_eth_of_init(void) r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n", - __FUNCTION__,r[1].name, r[1].start, r[1].end); + __func__,r[1].name, r[1].start, r[1].end); tsi_eth_dev = platform_device_register_simple("tsi-ethernet", i++, &r[0], diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c index 31d3d33d91f..ac1a72dc21e 100644 --- a/arch/powerpc/sysdev/tsi108_pci.c +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -207,7 +207,7 @@ int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary) /* PCI Config mapping */ tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE); tsi108_pci_cfg_phys = cfg_phys; - DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__, + DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__, tsi108_pci_cfg_base); /* Fetch host bridge registers address */ @@ -395,7 +395,7 @@ static int pci_irq_host_xlate(struct irq_host *h, struct device_node *ct, static int pci_irq_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { unsigned int irq; - DBG("%s(%d, 0x%lx)\n", __FUNCTION__, virq, hw); + DBG("%s(%d, 0x%lx)\n", __func__, virq, hw); if ((virq >= 1) && (virq <= 4)){ irq = virq + IRQ_PCI_INTAD_BASE - 1; get_irq_desc(irq)->status |= IRQ_LEVEL; diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index a34172ddc46..52c74780f40 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -45,7 +45,6 @@ #ifdef CONFIG_PPC64 #include <asm/hvcall.h> #include <asm/paca.h> -#include <asm/iseries/it_lp_reg_save.h> #endif #include "nonstdio.h" @@ -1244,15 +1243,12 @@ static void get_function_bounds(unsigned long pc, unsigned long *startp, static int xmon_depth_to_print = 64; -#ifdef CONFIG_PPC64 -#define LRSAVE_OFFSET 0x10 -#define REG_FRAME_MARKER 0x7265677368657265ul /* "regshere" */ -#define MARKER_OFFSET 0x60 +#define LRSAVE_OFFSET (STACK_FRAME_LR_SAVE * sizeof(unsigned long)) +#define MARKER_OFFSET (STACK_FRAME_MARKER * sizeof(unsigned long)) + +#ifdef __powerpc64__ #define REGS_OFFSET 0x70 #else -#define LRSAVE_OFFSET 4 -#define REG_FRAME_MARKER 0x72656773 -#define MARKER_OFFSET 8 #define REGS_OFFSET 16 #endif @@ -1318,7 +1314,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr, /* Look for "regshere" marker to see if this is an exception frame. */ if (mread(sp + MARKER_OFFSET, &marker, sizeof(unsigned long)) - && marker == REG_FRAME_MARKER) { + && marker == STACK_FRAME_REGS_MARKER) { if (mread(sp + REGS_OFFSET, ®s, sizeof(regs)) != sizeof(regs)) { printf("Couldn't read registers at %lx\n", @@ -1598,7 +1594,6 @@ void super_regs(void) if (firmware_has_feature(FW_FEATURE_ISERIES)) { struct paca_struct *ptrPaca; struct lppaca *ptrLpPaca; - struct ItLpRegSave *ptrLpRegSave; /* Dump out relevant Paca data areas. */ printf("Paca: \n"); @@ -1611,15 +1606,6 @@ void super_regs(void) printf(" Saved Gpr3=%.16lx Saved Gpr4=%.16lx \n", ptrLpPaca->saved_gpr3, ptrLpPaca->saved_gpr4); printf(" Saved Gpr5=%.16lx \n", ptrLpPaca->saved_gpr5); - - printf(" Local Processor Register Save Area (LpRegSave): \n"); - ptrLpRegSave = ptrPaca->reg_save_ptr; - printf(" Saved Sprg0=%.16lx Saved Sprg1=%.16lx \n", - ptrLpRegSave->xSPRG0, ptrLpRegSave->xSPRG0); - printf(" Saved Sprg2=%.16lx Saved Sprg3=%.16lx \n", - ptrLpRegSave->xSPRG2, ptrLpRegSave->xSPRG3); - printf(" Saved Msr =%.16lx Saved Nia =%.16lx \n", - ptrLpRegSave->xMSR, ptrLpRegSave->xNIA); } #endif |