aboutsummaryrefslogtreecommitdiff
path: root/arch/ppc/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/Kconfig')
-rw-r--r--arch/ppc/Kconfig1186
1 files changed, 0 insertions, 1186 deletions
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
deleted file mode 100644
index 0f1863ed9c1..00000000000
--- a/arch/ppc/Kconfig
+++ /dev/null
@@ -1,1186 +0,0 @@
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-
-mainmenu "Linux/PowerPC Kernel Configuration"
-
-config WORD_SIZE
- int
- default 32
-
-config MMU
- bool
- default y
-
-config GENERIC_HARDIRQS
- bool
- default y
-
-config RWSEM_GENERIC_SPINLOCK
- bool
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
- default y
-
-config ARCH_HAS_ILOG2_U32
- bool
- default y
-
-config ARCH_HAS_ILOG2_U64
- bool
- default n
-
-config GENERIC_HWEIGHT
- bool
- default y
-
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
-config PPC
- bool
- default y
- select HAVE_IDE
- select HAVE_OPROFILE
- select HAVE_KPROBES
-
-config PPC32
- bool
- default y
-
-# All PPCs use generic nvram driver through ppc_md
-config GENERIC_NVRAM
- bool
- default y
-
-config GENERIC_FIND_NEXT_BIT
- bool
- default y
-
-config SCHED_NO_NO_OMIT_FRAME_POINTER
- bool
- default y
-
-config ARCH_MAY_HAVE_PC_FDC
- bool
- default y
-
-config GENERIC_BUG
- bool
- default y
- depends on BUG
-
-source "init/Kconfig"
-
-menu "Processor"
-
-choice
- prompt "Processor Type"
- default 6xx
-
-config 6xx
- bool "6xx/7xx/74xx/52xx/82xx"
- select PPC_FPU
- help
- There are four types of PowerPC chips supported. The more common
- types (601, 603, 604, 740, 750, 7400), the older Freescale
- (formerly Motorola) embedded versions (821, 823, 850, 855, 860,
- 52xx, 82xx), the IBM embedded versions (403 and 405) and
- the Book E embedded processors from IBM (44x) and Freescale (85xx).
- For support for 64-bit processors, set ARCH=powerpc.
- Unless you are building a kernel for one of the embedded processor
- systems, choose 6xx.
- Also note that because the 52xx, 82xx family have a 603e
- core, specific support for that chipset is asked later on.
-
-config 40x
- bool "40x"
- select PPC_DCR_NATIVE
-
-config 44x
- bool "44x"
- select PPC_DCR_NATIVE
-
-config 8xx
- bool "8xx"
- select PPC_LIB_RHEAP
-
-endchoice
-
-config PPC_FPU
- bool
-
-config PPC_DCR_NATIVE
- bool
- default n
-
-config PPC_DCR
- bool
- depends on PPC_DCR_NATIVE
- default y
-
-config PTE_64BIT
- bool
- depends on 44x
- default y if 44x
-
-config PHYS_64BIT
- bool
- depends on 44x
- default y if 44x
- ---help---
- This option enables kernel support for larger than 32-bit physical
- addresses. This features is not be available on all e500 cores.
-
- If in doubt, say N here.
-
-config ALTIVEC
- bool "AltiVec Support"
- depends on 6xx
- depends on !8260
- ---help---
- This option enables kernel support for the Altivec extensions to the
- PowerPC processor. The kernel currently supports saving and restoring
- altivec registers, and turning on the 'altivec enable' bit so user
- processes can execute altivec instructions.
-
- This option is only usefully if you have a processor that supports
- altivec (G4, otherwise known as 74xx series), but does not have
- any affect on a non-altivec cpu (it does, however add code to the
- kernel).
-
- If in doubt, say Y here.
-
-config TAU
- bool "Thermal Management Support"
- depends on 6xx && !8260
- help
- G3 and G4 processors have an on-chip temperature sensor called the
- 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
- temperature within 2-4 degrees Celsius. This option shows the current
- on-die temperature in /proc/cpuinfo if the cpu supports it.
-
- Unfortunately, on some chip revisions, this sensor is very inaccurate
- and in some cases, does not work at all, so don't assume the cpu
- temp is actually what /proc/cpuinfo says it is.
-
-config TAU_INT
- bool "Interrupt driven TAU driver (DANGEROUS)"
- depends on TAU
- ---help---
- The TAU supports an interrupt driven mode which causes an interrupt
- whenever the temperature goes out of range. This is the fastest way
- to get notified the temp has exceeded a range. With this option off,
- a timer is used to re-check the temperature periodically.
-
- However, on some cpus it appears that the TAU interrupt hardware
- is buggy and can cause a situation which would lead unexplained hard
- lockups.
-
- Unless you are extending the TAU driver, or enjoy kernel/hardware
- debugging, leave this option off.
-
-config TAU_AVERAGE
- bool "Average high and low temp"
- depends on TAU
- ---help---
- The TAU hardware can compare the temperature to an upper and lower
- bound. The default behavior is to show both the upper and lower
- bound in /proc/cpuinfo. If the range is large, the temperature is
- either changing a lot, or the TAU hardware is broken (likely on some
- G4's). If the range is small (around 4 degrees), the temperature is
- relatively stable. If you say Y here, a single temperature value,
- halfway between the upper and lower bounds, will be reported in
- /proc/cpuinfo.
-
- If in doubt, say N here.
-
-config MATH_EMULATION
- bool "Math emulation"
- depends on 4xx || 8xx
- ---help---
- Some PowerPC chips designed for embedded applications do not have
- a floating-point unit and therefore do not implement the
- floating-point instructions in the PowerPC instruction set. If you
- say Y here, the kernel will include code to emulate a floating-point
- unit, which will allow programs that use floating-point
- instructions to run.
-
- If you have an Apple machine or an IBM RS/6000 or pSeries machine,
- or any machine with a 6xx, 7xx or 7xxx series processor, say N
- here. Saying Y here will not hurt performance (on any machine) but
- will increase the size of the kernel.
-
-config KEXEC
- bool "kexec system call (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- kexec is a system call that implements the ability to shutdown your
- current kernel, and to start another kernel. It is like a reboot
- but it is independent of the system firmware. And like a reboot
- you can start any kernel with it, not just Linux.
-
- The name comes from the similarity to the exec system call.
-
- It is an ongoing process to be certain the hardware in a machine
- is properly shutdown, so do not be surprised if this code does not
- initially work for you. It may help to enable device hotplugging
- support. As of this writing the exact hardware interface is
- strongly in flux, so no good recommendation can be made.
-
- In the GameCube implementation, kexec allows you to load and
- run DOL files, including kernel and homebrew DOLs.
-
-source "drivers/cpufreq/Kconfig"
-
-config PPC601_SYNC_FIX
- bool "Workarounds for PPC601 bugs"
- depends on 6xx && PPC_PREP
- help
- Some versions of the PPC601 (the first PowerPC chip) have bugs which
- mean that extra synchronization instructions are required near
- certain instructions, typically those that make major changes to the
- CPU state. These extra instructions reduce performance slightly.
- If you say N here, these extra instructions will not be included,
- resulting in a kernel which will run faster but may not run at all
- on some systems with the PPC601 chip.
-
- If in doubt, say Y here.
-
-source arch/ppc/platforms/4xx/Kconfig
-
-config PPC_STD_MMU
- bool
- depends on 6xx
- default y
-
-config NOT_COHERENT_CACHE
- bool
- depends on 4xx || 8xx
- default y
-
-endmenu
-
-menu "Platform options"
-
-config FADS
- bool
-
-choice
- prompt "8xx Machine Type"
- depends on 8xx
- default RPXLITE
-
-config RPXLITE
- bool "RPX-Lite"
- ---help---
- Single-board computers based around the PowerPC MPC8xx chips and
- intended for embedded applications. The following types are
- supported:
-
- RPX-Lite:
- Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823.
-
- RPX-Classic:
- Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on
- the MPC 860
-
- BSE-IP:
- Bright Star Engineering ip-Engine.
-
- TQM823L:
- TQM850L:
- TQM855L:
- TQM860L:
- MPC8xx based family of mini modules, half credit card size,
- up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports,
- 2 x CAN bus interface, ...
- Manufacturer: TQ Components, www.tq-group.de
- Date of Release: October (?) 1999
- End of Life: not yet :-)
- URL:
- - module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>
- - starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf>
- - images: <http://www.denx.de/embedded-ppc-en.html>
-
- FPS850L:
- FingerPrint Sensor System (based on TQM850L)
- Manufacturer: IKENDI AG, <http://www.ikendi.com/>
- Date of Release: November 1999
- End of life: end 2000 ?
- URL: see TQM850L
-
- IVMS8:
- MPC860 based board used in the "Integrated Voice Mail System",
- Small Version (8 voice channels)
- Manufacturer: Speech Design, <http://www.speech-design.de/>
- Date of Release: December 2000 (?)
- End of life: -
- URL: <http://www.speech-design.de/>
-
- IVML24:
- MPC860 based board used in the "Integrated Voice Mail System",
- Large Version (24 voice channels)
- Manufacturer: Speech Design, <http://www.speech-design.de/>
- Date of Release: March 2001 (?)
- End of life: -
- URL: <http://www.speech-design.de/>
-
- HERMES:
- Hermes-Pro ISDN/LAN router with integrated 8 x hub
- Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
- <http://www.multidata.de/>
- Date of Release: 2000 (?)
- End of life: -
- URL: <http://www.multidata.de/english/products/hpro.htm>
-
- IP860:
- VMEBus IP (Industry Pack) carrier board with MPC860
- Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
- Date of Release: ?
- End of life: -
- URL: <http://www.microsys.de/html/ip860.html>
-
- PCU_E:
- PCU = Peripheral Controller Unit, Extended
- Manufacturer: Siemens AG, ICN (Information and Communication Networks)
- <http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
- Date of Release: April 2001
- End of life: August 2001
- URL: n. a.
-
-config RPXCLASSIC
- bool "RPX-Classic"
- help
- The RPX-Classic is a single-board computer based on the Motorola
- MPC860. It features 16MB of DRAM and a variable amount of flash,
- I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two
- LEDs. Variants with Ethernet ports exist. Say Y here to support it
- directly.
-
-config BSEIP
- bool "BSE-IP"
- help
- Say Y here to support the Bright Star Engineering ipEngine SBC.
- This is a credit-card-sized device featuring a MPC823 processor,
- 26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
- controller, and two RS232 ports.
-
-config MPC8XXFADS
- bool "FADS"
- select FADS
-
-config TQM823L
- bool "TQM823L"
- help
- Say Y here to support the TQM823L, one of an MPC8xx-based family of
- mini SBCs (half credit-card size) from TQ Components first released
- in late 1999. Technical references are at
- <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
- <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
- <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM850L
- bool "TQM850L"
- help
- Say Y here to support the TQM850L, one of an MPC8xx-based family of
- mini SBCs (half credit-card size) from TQ Components first released
- in late 1999. Technical references are at
- <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
- <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
- <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM855L
- bool "TQM855L"
- help
- Say Y here to support the TQM855L, one of an MPC8xx-based family of
- mini SBCs (half credit-card size) from TQ Components first released
- in late 1999. Technical references are at
- <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
- <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
- <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM860L
- bool "TQM860L"
- help
- Say Y here to support the TQM860L, one of an MPC8xx-based family of
- mini SBCs (half credit-card size) from TQ Components first released
- in late 1999. Technical references are at
- <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
- <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
- <http://www.denx.de/embedded-ppc-en.html>.
-
-config FPS850L
- bool "FPS850L"
-
-config IVMS8
- bool "IVMS8"
- help
- Say Y here to support the Integrated Voice-Mail Small 8-channel SBC
- from Speech Design, released March 2001. The manufacturer's website
- is at <http://www.speech-design.de/>.
-
-config IVML24
- bool "IVML24"
- help
- Say Y here to support the Integrated Voice-Mail Large 24-channel SBC
- from Speech Design, released March 2001. The manufacturer's website
- is at <http://www.speech-design.de/>.
-
-config HERMES_PRO
- bool "HERMES"
-
-config IP860
- bool "IP860"
-
-config LWMON
- bool "LWMON"
-
-config PCU_E
- bool "PCU_E"
-
-config CCM
- bool "CCM"
-
-config LANTEC
- bool "LANTEC"
-
-config MBX
- bool "MBX"
- help
- MBX is a line of Motorola single-board computer based around the
- MPC821 and MPC860 processors, and intended for embedded-controller
- applications. Say Y here to support these boards directly.
-
-config WINCEPT
- bool "WinCept"
- help
- The Wincept 100/110 is a Motorola single-board computer based on the
- MPC821 PowerPC, introduced in 1998 and designed to be used in
- thin-client machines. Say Y to support it directly.
-
-endchoice
-
-choice
- prompt "Machine Type"
- depends on 6xx
- default PPC_PREP
- ---help---
- Linux currently supports several different kinds of PowerPC-based
- machines: Apple Power Macintoshes and clones (such as the Motorola
- Starmax series), PReP (PowerPC Reference Platform) machines (such
- as the Motorola PowerStacks, Motorola cPCI/VME embedded systems,
- and some IBM RS/6000 systems), CHRP (Common Hardware Reference
- Platform) machines (including all of the recent IBM RS/6000 and
- pSeries machines), and several embedded PowerPC systems containing
- 4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors. Currently, the
- default option is to build a kernel which works on PReP.
-
- Note that support for Apple and CHRP machines is now only available
- with ARCH=powerpc, and has been removed from this menu. If you
- wish to build a kernel for an Apple or CHRP machine, exit this
- configuration process and re-run it with ARCH=powerpc.
-
- Select PReP if configuring for a PReP machine.
-
-config PPC_PREP
- bool "PReP"
-
-config KATANA
- bool "Artesyn-Katana"
- help
- Select KATANA if configuring an Artesyn KATANA 750i or 3750
- cPCI board.
-
-config WILLOW
- bool "Cogent-Willow"
-
-config CPCI690
- bool "Force-CPCI690"
- help
- Select CPCI690 if configuring a Force CPCI690 cPCI board.
-
-config POWERPMC250
- bool "Force-PowerPMC250"
-
-config CHESTNUT
- bool "IBM 750FX Eval board or 750GX Eval board"
- help
- Select CHESTNUT if configuring an IBM 750FX Eval Board or a
- IBM 750GX Eval board.
-
-config SPRUCE
- bool "IBM-Spruce"
- select PPC_INDIRECT_PCI
-
-config HDPU
- bool "Sky-HDPU"
- help
- Select HDPU if configuring a Sky Computers Compute Blade.
-
-config HDPU_FEATURES
- depends on HDPU
- tristate "HDPU-Features"
- help
- Select to enable HDPU enhanced features.
-
-config EV64260
- bool "Marvell-EV64260BP"
- help
- Select EV64260 if configuring a Marvell (formerly Galileo)
- EV64260BP Evaluation platform.
-
-config LOPEC
- bool "Motorola-LoPEC"
- select PPC_I8259
-
-config MVME5100
- bool "Motorola-MVME5100"
- select PPC_INDIRECT_PCI
-
-config PPLUS
- bool "Motorola-PowerPlus"
- select PPC_I8259
- select PPC_INDIRECT_PCI
-
-config PRPMC750
- bool "Motorola-PrPMC750"
- select PPC_INDIRECT_PCI
-
-config PRPMC800
- bool "Motorola-PrPMC800"
- select PPC_INDIRECT_PCI
-
-config SANDPOINT
- bool "Motorola-Sandpoint"
- select PPC_I8259
- help
- Select SANDPOINT if configuring for a Motorola Sandpoint X3
- (any flavor).
-
-config RADSTONE_PPC7D
- bool "Radstone Technology PPC7D board"
- select PPC_I8259
-
-config PAL4
- bool "SBS-Palomar4"
-
-config EST8260
- bool "EST8260"
- ---help---
- The EST8260 is a single-board computer manufactured by Wind River
- Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
- the MPC8260. Wind River Systems has a website at
- <http://www.windriver.com/>, but the EST8260 cannot be found on it
- and has probably been discontinued or rebadged.
-
-config SBC82xx
- bool "SBC82xx"
- ---help---
- SBC PowerQUICC II, single-board computer with MPC82xx CPU
- Manufacturer: Wind River Systems, Inc.
- Date of Release: May 2003
- End of Life: -
- URL: <http://www.windriver.com/>
-
-config SBS8260
- bool "SBS8260"
-
-config RPX8260
- bool "RPXSUPER"
-
-config TQM8260
- bool "TQM8260"
- ---help---
- MPC8260 based module, little larger than credit card,
- up to 128 MB global + 64 MB local RAM, 32 MB Flash,
- 32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
- 2 x serial ports, ...
- Manufacturer: TQ Components, www.tq-group.de
- Date of Release: June 2001
- End of Life: not yet :-)
- URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
-
-config PQ2FADS
- bool "Freescale-PQ2FADS"
- help
- Select PQ2FADS if you wish to configure for a Freescale
- PQ2FADS board (-VR or -ZU).
-
-config LITE5200
- bool "Freescale LITE5200 / (IceCube)"
- select PPC_MPC52xx
- help
- Support for the LITE5200 dev board for the MPC5200 from Freescale.
- This is for the LITE5200 version 2.0 board. Don't know if it changes
- much but it's only been tested on this board version. I think this
- board is also known as IceCube.
-
-config LITE5200B
- bool "Freescale LITE5200B"
- depends on LITE5200
- help
- Support for the LITE5200B dev board for the MPC5200 from Freescale.
- This is the new board with 2 PCI slots.
-
-config EV64360
- bool "Marvell-EV64360BP"
- help
- Select EV64360 if configuring a Marvell EV64360BP Evaluation
- platform.
-endchoice
-
-config TQM8xxL
- bool
- depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
- default y
-
-config EMBEDDEDBOOT
- bool
- depends on 8xx || 8260
- default y
-
-config PPC_MPC52xx
- bool
-
-config 8260
- bool "CPM2 Support" if WILLOW
- depends on 6xx
- default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
- help
- The MPC8260 is a typical embedded CPU made by Motorola. Selecting
- this option means that you wish to build a kernel for a machine with
- an 8260 class CPU.
-
-config CPM1
- bool
- depends on 8xx
- default y
- help
- The CPM1 (Communications Processor Module) is a coprocessor on
- embedded CPUs made by Motorola. Selecting this option means that
- you wish to build a kernel for a machine with a CPM1 coprocessor
- on it (8xx, 827x, 8560).
-
-config CPM2
- bool
- depends on 8260 || MPC8560 || MPC8555
- select PPC_LIB_RHEAP
- default y
- help
- The CPM2 (Communications Processor Module) is a coprocessor on
- embedded CPUs made by Motorola. Selecting this option means that
- you wish to build a kernel for a machine with a CPM2 coprocessor
- on it (826x, 827x, 8560).
-
-config PPC_GEN550
- bool
- depends on SANDPOINT || SPRUCE || PPLUS || \
- PRPMC750 || PRPMC800 || LOPEC || \
- (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D
- default y
-
-config FORCE
- bool
- depends on 6xx && POWERPMC250
- default y
-
-config GT64260
- bool
- depends on EV64260 || CPCI690
- default y
-
-config MV64360 # Really MV64360 & MV64460
- bool
- depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
- default y
-
-config MV64X60
- bool
- depends on (GT64260 || MV64360)
- select PPC_INDIRECT_PCI
- default y
-
-config MV643XX_ETH_0
- bool
- depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360 || HDPU)
- default y
-
-config MV643XX_ETH_1
- bool
- depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
- default y
-
-config MV643XX_ETH_2
- bool
- depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
- default y
-
-menu "Set bridge options"
- depends on MV64X60
-
-config NOT_COHERENT_CACHE
- bool "Turn off Cache Coherency"
- default n
- help
- Some 64x60 bridges lock up when trying to enforce cache coherency.
- When this option is selected, cache coherency will be turned off.
- Note that this can cause other problems (e.g., stale data being
- speculatively loaded via a cached mapping). Use at your own risk.
-
-config MV64X60_BASE
- hex "Set bridge base used by firmware"
- default "0xf1000000"
- help
- A firmware can leave the base address of the bridge's registers at
- a non-standard location. If so, set this value to reflect the
- address of that non-standard location.
-
-config MV64X60_NEW_BASE
- hex "Set bridge base used by kernel"
- default "0xf1000000"
- help
- If the current base address of the bridge's registers is not where
- you want it, set this value to the address that you want it moved to.
-
-endmenu
-
-config NONMONARCH_SUPPORT
- bool "Enable Non-Monarch Support"
- depends on PRPMC800
-
-config HARRIER
- bool
- depends on PRPMC800
- default y
-
-config EPIC_SERIAL_MODE
- bool
- depends on 6xx && (LOPEC || SANDPOINT)
- default y
-
-config MPC10X_BRIDGE
- bool
- depends on POWERPMC250 || LOPEC || SANDPOINT
- select PPC_INDIRECT_PCI
- default y
-
-config MPC10X_OPENPIC
- bool
- depends on POWERPMC250 || LOPEC || SANDPOINT
- default y
-
-config MPC10X_STORE_GATHERING
- bool "Enable MPC10x store gathering"
- depends on MPC10X_BRIDGE
-
-config SANDPOINT_ENABLE_UART1
- bool "Enable DUART mode on Sandpoint"
- depends on SANDPOINT
- help
- If this option is enabled then the MPC824x processor will run
- in DUART mode instead of UART mode.
-
-config HARRIER_STORE_GATHERING
- bool "Enable Harrier store gathering"
- depends on HARRIER
-
-config MVME5100_IPMC761_PRESENT
- bool "MVME5100 configured with an IPMC761"
- depends on MVME5100
- select PPC_I8259
-
-config SPRUCE_BAUD_33M
- bool "Spruce baud clock support"
- depends on SPRUCE
-
-config PC_KEYBOARD
- bool "PC PS/2 style Keyboard"
- depends on 4xx || CPM2
-
-config PPCBUG_NVRAM
- bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
- default y if PPC_PREP
-
-config SMP
- depends on PPC_STD_MMU
- bool "Symmetric multi-processing support"
- ---help---
- This enables support for systems with more than one CPU. If you have
- a system with only one CPU, say N. If you have a system with more
- than one CPU, say Y. Note that the kernel does not currently
- support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
- since they have inadequate hardware support for multiprocessor
- operation.
-
- If you say N here, the kernel will run on single and multiprocessor
- machines, but will use only one CPU of a multiprocessor machine. If
- you say Y here, the kernel will run on single-processor machines.
- On a single-processor machine, the kernel will run faster if you say
- N here.
-
- If you don't know what to do here, say N.
-
-config IRQ_ALL_CPUS
- bool "Distribute interrupts on all CPUs by default"
- depends on SMP && !MV64360
- help
- This option gives the kernel permission to distribute IRQs across
- multiple CPUs. Saying N here will route all IRQs to the first
- CPU. Generally saying Y is safe, although some problems have been
- reported with SMP Power Macintoshes with this option enabled.
-
-config NR_CPUS
- int "Maximum number of CPUs (2-32)"
- range 2 32
- depends on SMP
- default "4"
-
-config HIGHMEM
- bool "High memory support"
-
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
-source kernel/Kconfig.hz
-source kernel/Kconfig.preempt
-source "mm/Kconfig"
-
-source "fs/Kconfig.binfmt"
-
-config PREP_RESIDUAL
- bool "Support for PReP Residual Data"
- depends on PPC_PREP
- help
- Some PReP systems have residual data passed to the kernel by the
- firmware. This allows detection of memory size, devices present and
- other useful pieces of information. Sometimes this information is
- not present or incorrect, in which case it could lead to the machine
- behaving incorrectly. If this happens, either disable PREP_RESIDUAL
- or pass the 'noresidual' option to the kernel.
-
- If you are running a PReP system, say Y here, otherwise say N.
-
-config PROC_PREPRESIDUAL
- bool "Support for reading of PReP Residual Data in /proc"
- depends on PREP_RESIDUAL && PROC_FS
- help
- Enabling this option will create a /proc/residual file which allows
- you to get at the residual data on PReP systems. You will need a tool
- (lsresidual) to parse it. If you aren't on a PReP system, you don't
- want this.
-
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
-
-config CMDLINE
- string "Initial kernel command string"
- depends on CMDLINE_BOOL
- default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, you can supply
- some command-line options at build time by entering them here. In
- most cases you will need to specify the root device here.
-
-if BROKEN
-source kernel/power/Kconfig
-endif
-
-config SECCOMP
- bool "Enable seccomp to safely compute untrusted bytecode"
- depends on PROC_FS
- default y
- help
- This kernel feature is useful for number crunching applications
- that may need to compute untrusted bytecode during their
- execution. By using pipes or other transports made available to
- the process as file descriptors supporting the read/write
- syscalls, it's possible to isolate those applications in
- their own address space using seccomp. Once seccomp is
- enabled via /proc/<pid>/seccomp, it cannot be disabled
- and the task is only allowed to execute a few safe syscalls
- defined by each seccomp mode.
-
- If unsure, say Y. Only embedded should say N here.
-
-endmenu
-
-config ISA_DMA_API
- bool
- default y
-
-menu "Bus options"
-
-config ISA
- bool "Support for ISA-bus hardware"
- depends on PPC_PREP
- help
- Find out whether you have ISA slots on your motherboard. ISA is the
- name of a bus system, i.e. the way the CPU talks to the other stuff
- inside your box. If you have an Apple machine, say N here; if you
- have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If
- you have an embedded board, consult your board documentation.
-
-config ZONE_DMA
- bool
- default y
-
-config GENERIC_ISA_DMA
- bool
- depends on 6xx && !CPM2
- default y
-
-config PPC_I8259
- bool
- default y if PPC_PREP
- default n
-
-config PPC_INDIRECT_PCI
- bool
- depends on PCI
- default y if 40x || 44x || PPC_PREP
- default n
-
-config EISA
- bool
- help
- The Extended Industry Standard Architecture (EISA) bus is a bus
- architecture used on some older intel-based PCs.
-
-config SBUS
- bool
-
-# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
-config MCA
- bool
-
-config PCI
- bool "PCI support" if 40x || CPM2 || PPC_MPC52xx
- default y if !40x && !CPM2 && !8xx
- default PCI_QSPAN if !4xx && !CPM2 && 8xx
- help
- Find out whether your system includes a PCI bus. PCI is the name of
- a bus system, i.e. the way the CPU talks to the other stuff inside
- your box. If you say Y here, the kernel will include drivers and
- infrastructure code to support PCI bus devices.
-
-config PCI_DOMAINS
- def_bool PCI
-
-config PCI_SYSCALL
- def_bool PCI
-
-config PCI_QSPAN
- bool "QSpan PCI"
- depends on !4xx && !CPM2 && 8xx
- select PPC_I8259
- help
- Say Y here if you have a system based on a Motorola 8xx-series
- embedded processor with a QSPAN PCI interface, otherwise say N.
-
-config PCI_8260
- bool
- depends on PCI && 8260
- select PPC_INDIRECT_PCI
- default y
-
-config 8260_PCI9
- bool "Enable workaround for MPC826x erratum PCI 9"
- depends on PCI_8260
- default y
-
-choice
- prompt "IDMA channel for PCI 9 workaround"
- depends on 8260_PCI9
-
-config 8260_PCI9_IDMA1
- bool "IDMA1"
-
-config 8260_PCI9_IDMA2
- bool "IDMA2"
-
-config 8260_PCI9_IDMA3
- bool "IDMA3"
-
-config 8260_PCI9_IDMA4
- bool "IDMA4"
-
-endchoice
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-config RAPIDIO
- bool "RapidIO support" if MPC8540 || MPC8560
- help
- If you say Y here, the kernel will include drivers and
- infrastructure code to support RapidIO interconnect devices.
-
-source "drivers/rapidio/Kconfig"
-
-endmenu
-
-menu "Advanced setup"
-
-config ADVANCED_OPTIONS
- bool "Prompt for advanced kernel configuration options"
- help
- This option will enable prompting for a variety of advanced kernel
- configuration options. These options can cause the kernel to not
- work if they are set incorrectly, but can be used to optimize certain
- aspects of kernel memory management.
-
- Unless you know what you are doing, say N here.
-
-comment "Default settings for advanced configuration options are used"
- depends on !ADVANCED_OPTIONS
-
-config HIGHMEM_START_BOOL
- bool "Set high memory pool address"
- depends on ADVANCED_OPTIONS && HIGHMEM
- help
- This option allows you to set the base address of the kernel virtual
- area used to map high memory pages. This can be useful in
- optimizing the layout of kernel virtual memory.
-
- Say N here unless you know what you are doing.
-
-config HIGHMEM_START
- hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
- default "0xfe000000"
-
-config LOWMEM_SIZE_BOOL
- bool "Set maximum low memory"
- depends on ADVANCED_OPTIONS
- help
- This option allows you to set the maximum amount of memory which
- will be used as "low memory", that is, memory which the kernel can
- access directly, without having to set up a kernel virtual mapping.
- This can be useful in optimizing the layout of kernel virtual
- memory.
-
- Say N here unless you know what you are doing.
-
-config LOWMEM_SIZE
- hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
- default "0x30000000"
-
-config KERNEL_START_BOOL
- bool "Set custom kernel base address"
- depends on ADVANCED_OPTIONS
- help
- This option allows you to set the kernel virtual address at which
- the kernel will map low memory (the kernel image will be linked at
- this address). This can be useful in optimizing the virtual memory
- layout of the system.
-
- Say N here unless you know what you are doing.
-
-config KERNEL_START
- hex "Virtual address of kernel base" if KERNEL_START_BOOL
- default "0xc0000000"
-
-config TASK_SIZE_BOOL
- bool "Set custom user task size"
- depends on ADVANCED_OPTIONS
- help
- This option allows you to set the amount of virtual address space
- allocated to user tasks. This can be useful in optimizing the
- virtual memory layout of the system.
-
- Say N here unless you know what you are doing.
-
-config TASK_SIZE
- hex "Size of user task space" if TASK_SIZE_BOOL
- default "0x80000000"
-
-config CONSISTENT_START_BOOL
- bool "Set custom consistent memory pool address"
- depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
- help
- This option allows you to set the base virtual address
- of the consistent memory pool. This pool of virtual
- memory is used to make consistent memory allocations.
-
-config CONSISTENT_START
- hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
- default "0xff100000" if NOT_COHERENT_CACHE
-
-config CONSISTENT_SIZE_BOOL
- bool "Set custom consistent memory pool size"
- depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
- help
- This option allows you to set the size of the
- consistent memory pool. This pool of virtual memory
- is used to make consistent memory allocations.
-
-config CONSISTENT_SIZE
- hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
- default "0x00200000" if NOT_COHERENT_CACHE
-
-config BOOT_LOAD_BOOL
- bool "Set the boot link/load address"
- depends on ADVANCED_OPTIONS && !PPC_PREP
- help
- This option allows you to set the initial load address of the zImage
- or zImage.initrd file. This can be useful if you are on a board
- which has a small amount of memory.
-
- Say N here unless you know what you are doing.
-
-config BOOT_LOAD
- hex "Link/load address for booting" if BOOT_LOAD_BOOL
- default "0x00400000" if 40x || 8xx || 8260
- default "0x01000000" if 44x
- default "0x00800000"
-
-config PIN_TLB
- bool "Pinned Kernel TLBs (860 ONLY)"
- depends on ADVANCED_OPTIONS && 8xx
-
-config PPC_LIB_RHEAP
- bool
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/ppc/8xx_io/Kconfig"
-
-source "arch/ppc/8260_io/Kconfig"
-
-
-menu "IBM 40x options"
- depends on 40x
-
-config SERIAL_SICC
- bool "SICC Serial port"
- depends on STB03xxx
-
-config UART1_DFLT_CONSOLE
- bool
- depends on SERIAL_SICC && UART0_TTYS1
- default y
-
-config SERIAL_SICC_CONSOLE
- bool
- depends on SERIAL_SICC && UART0_TTYS1
- default y
-
-endmenu
-
-source "lib/Kconfig"
-
-source "arch/ppc/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"