aboutsummaryrefslogtreecommitdiff
path: root/arch/ppc/boot/simple/iic.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/boot/simple/iic.c')
-rw-r--r--arch/ppc/boot/simple/iic.c214
1 files changed, 214 insertions, 0 deletions
diff --git a/arch/ppc/boot/simple/iic.c b/arch/ppc/boot/simple/iic.c
new file mode 100644
index 00000000000..e4efd838bfa
--- /dev/null
+++ b/arch/ppc/boot/simple/iic.c
@@ -0,0 +1,214 @@
+/* Minimal support functions to read configuration from IIC EEPROMS
+ * on MPC8xx boards. Originally written for RPGC RPX-Lite.
+ * Dan Malek (dmalek@jlc.net).
+ */
+#include <linux/types.h>
+#include <asm/uaccess.h>
+#include <asm/mpc8xx.h>
+#include <asm/commproc.h>
+
+
+/* IIC functions.
+ * These are just the basic master read/write operations so we can
+ * examine serial EEPROM.
+ */
+void iic_read(uint devaddr, u_char *buf, uint offset, uint count);
+
+static int iic_init_done;
+
+static void
+iic_init(void)
+{
+ volatile iic_t *iip;
+ volatile i2c8xx_t *i2c;
+ volatile cpm8xx_t *cp;
+ volatile immap_t *immap;
+ uint dpaddr;
+
+ immap = (immap_t *)IMAP_ADDR;
+ cp = (cpm8xx_t *)&(immap->im_cpm);
+
+ /* Reset the CPM. This is necessary on the 860 processors
+ * that may have started the SCC1 ethernet without relocating
+ * the IIC.
+ * This also stops the Ethernet in case we were loaded by a
+ * BOOTP rom monitor.
+ */
+ cp->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG);
+
+ /* Wait for it.
+ */
+ while (cp->cp_cpcr & (CPM_CR_RST | CPM_CR_FLG));
+
+ /* Remove any microcode patches. We will install our own
+ * later.
+ */
+ cp->cp_cpmcr1 = 0;
+ cp->cp_cpmcr2 = 0;
+ cp->cp_cpmcr3 = 0;
+ cp->cp_cpmcr4 = 0;
+ cp->cp_rccr = 0;
+
+ iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
+ i2c = (i2c8xx_t *)&(immap->im_i2c);
+
+ /* Initialize Port B IIC pins.
+ */
+ cp->cp_pbpar |= 0x00000030;
+ cp->cp_pbdir |= 0x00000030;
+ cp->cp_pbodr |= 0x00000030;
+
+ /* Initialize the parameter ram.
+ */
+
+ /* Allocate space for a two transmit and one receive buffer
+ * descriptor in the DP ram.
+ * For now, this address seems OK, but it may have to
+ * change with newer versions of the firmware.
+ */
+ dpaddr = 0x0840;
+
+ /* Set up the IIC parameters in the parameter ram.
+ */
+ iip->iic_tbase = dpaddr;
+ iip->iic_rbase = dpaddr + (2 * sizeof(cbd_t));
+
+ iip->iic_tfcr = SMC_EB;
+ iip->iic_rfcr = SMC_EB;
+
+ /* This should really be done by the reader/writer.
+ */
+ iip->iic_mrblr = 128;
+
+ /* Initialize Tx/Rx parameters.
+ */
+ cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_I2C, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ while (cp->cp_cpcr & CPM_CR_FLG);
+
+ /* Select an arbitrary address. Just make sure it is unique.
+ */
+ i2c->i2c_i2add = 0x34;
+
+ /* Make clock run maximum slow.
+ */
+ i2c->i2c_i2brg = 7;
+
+ /* Disable interrupts.
+ */
+ i2c->i2c_i2cmr = 0;
+ i2c->i2c_i2cer = 0xff;
+
+ /* Enable SDMA.
+ */
+ immap->im_siu_conf.sc_sdcr = 1;
+
+ iic_init_done = 1;
+}
+
+/* Read from IIC.
+ * Caller provides device address, memory buffer, and byte count.
+ */
+static u_char iitemp[32];
+
+void
+iic_read(uint devaddr, u_char *buf, uint offset, uint count)
+{
+ volatile iic_t *iip;
+ volatile i2c8xx_t *i2c;
+ volatile cbd_t *tbdf, *rbdf;
+ volatile cpm8xx_t *cp;
+ volatile immap_t *immap;
+ u_char *tb;
+ uint temp;
+
+ /* If the interface has not been initialized, do that now.
+ */
+ if (!iic_init_done)
+ iic_init();
+
+ immap = (immap_t *)IMAP_ADDR;
+ cp = (cpm8xx_t *)&(immap->im_cpm);
+
+ iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
+ i2c = (i2c8xx_t *)&(immap->im_i2c);
+
+ tbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_tbase];
+ rbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_rbase];
+
+ /* Send a "dummy write" operation. This is a write request with
+ * only the offset sent, followed by another start condition.
+ * This will ensure we start reading from the first location
+ * of the EEPROM.
+ */
+ tb = iitemp;
+ tb = (u_char *)(((uint)tb + 15) & ~15);
+ tbdf->cbd_bufaddr = (int)tb;
+ *tb = devaddr & 0xfe; /* Device address */
+ *(tb+1) = offset; /* Offset */
+ tbdf->cbd_datlen = 2; /* Length */
+ tbdf->cbd_sc =
+ BD_SC_READY | BD_SC_LAST | BD_SC_WRAP | BD_IIC_START;
+
+ i2c->i2c_i2mod = 1; /* Enable */
+ i2c->i2c_i2cer = 0xff;
+ i2c->i2c_i2com = 0x81; /* Start master */
+
+ /* Wait for IIC transfer.
+ */
+#if 0
+ while ((i2c->i2c_i2cer & 3) == 0);
+
+ if (tbdf->cbd_sc & BD_SC_READY)
+ printf("IIC ra complete but tbuf ready\n");
+#else
+ temp = 10000000;
+ while ((tbdf->cbd_sc & BD_SC_READY) && (temp != 0))
+ temp--;
+#if 0
+ /* We can't do this...there is no serial port yet!
+ */
+ if (temp == 0) {
+ printf("Timeout reading EEPROM\n");
+ return;
+ }
+#endif
+#endif
+
+ /* Chip errata, clear enable.
+ */
+ i2c->i2c_i2mod = 0;
+
+ /* To read, we need an empty buffer of the proper length.
+ * All that is used is the first byte for address, the remainder
+ * is just used for timing (and doesn't really have to exist).
+ */
+ tbdf->cbd_bufaddr = (int)tb;
+ *tb = devaddr | 1; /* Device address */
+ rbdf->cbd_bufaddr = (uint)buf; /* Desination buffer */
+ tbdf->cbd_datlen = rbdf->cbd_datlen = count + 1; /* Length */
+ tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP | BD_IIC_START;
+ rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
+
+ /* Chip bug, set enable here.
+ */
+ i2c->i2c_i2mod = 1; /* Enable */
+ i2c->i2c_i2cer = 0xff;
+ i2c->i2c_i2com = 0x81; /* Start master */
+
+ /* Wait for IIC transfer.
+ */
+#if 0
+ while ((i2c->i2c_i2cer & 1) == 0);
+
+ if (rbdf->cbd_sc & BD_SC_EMPTY)
+ printf("IIC read complete but rbuf empty\n");
+#else
+ temp = 10000000;
+ while ((tbdf->cbd_sc & BD_SC_READY) && (temp != 0))
+ temp--;
+#endif
+
+ /* Chip errata, clear enable.
+ */
+ i2c->i2c_i2mod = 0;
+}