diff options
Diffstat (limited to 'arch/ppc/platforms/fads.h')
| -rw-r--r-- | arch/ppc/platforms/fads.h | 130 |
1 files changed, 0 insertions, 130 deletions
diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h deleted file mode 100644 index 5219366667b..00000000000 --- a/arch/ppc/platforms/fads.h +++ /dev/null @@ -1,130 +0,0 @@ -/* - * A collection of structures, addresses, and values associated with - * the Motorola 860T FADS board. Copied from the MBX stuff. - * - * Copyright (c) 1998 Dan Malek (dmalek@jlc.net) - * - * Added MPC86XADS support. - * The MPC86xADS manual says the board "is compatible with the MPC8xxFADS - * for SW point of view". This is 99% correct. - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * 2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_FADS_H__ -#define __ASM_FADS_H__ - - -#include <asm/ppcboot.h> - -/* Memory map is configured by the PROM startup. - * I tried to follow the FADS manual, although the startup PROM - * dictates this and we simply have to move some of the physical - * addresses for Linux. - */ -#define BCSR_ADDR ((uint)0xff010000) - -/* PHY link change interrupt */ -#define PHY_INTERRUPT SIU_IRQ2 - -#define BCSR_SIZE ((uint)(64 * 1024)) -#define BCSR0 ((uint)(BCSR_ADDR + 0x00)) -#define BCSR1 ((uint)(BCSR_ADDR + 0x04)) -#define BCSR2 ((uint)(BCSR_ADDR + 0x08)) -#define BCSR3 ((uint)(BCSR_ADDR + 0x0c)) -#define BCSR4 ((uint)(BCSR_ADDR + 0x10)) - -#define IMAP_ADDR ((uint)0xff000000) -#define IMAP_SIZE ((uint)(64 * 1024)) - -#define PCMCIA_MEM_ADDR ((uint)0xff020000) -#define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) - -/* Bits of interest in the BCSRs. - */ -#define BCSR1_ETHEN ((uint)0x20000000) -#define BCSR1_IRDAEN ((uint)0x10000000) -#define BCSR1_RS232EN_1 ((uint)0x01000000) -#define BCSR1_PCCEN ((uint)0x00800000) -#define BCSR1_PCCVCC0 ((uint)0x00400000) -#define BCSR1_PCCVPP0 ((uint)0x00200000) -#define BCSR1_PCCVPP1 ((uint)0x00100000) -#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) -#define BCSR1_RS232EN_2 ((uint)0x00040000) -#define BCSR1_PCCVCC1 ((uint)0x00010000) -#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) - -#define BCSR4_ETHLOOP ((uint)0x80000000) /* EEST Loopback */ -#define BCSR4_EEFDX ((uint)0x40000000) /* EEST FDX enable */ -#define BCSR4_FETH_EN ((uint)0x08000000) /* PHY enable */ -#define BCSR4_FETHCFG0 ((uint)0x04000000) /* PHY autoneg mode */ -#define BCSR4_FETHCFG1 ((uint)0x00400000) /* PHY autoneg mode */ -#define BCSR4_FETHFDE ((uint)0x02000000) /* PHY FDX advertise */ -#define BCSR4_FETHRST ((uint)0x00200000) /* PHY Reset */ - -/* IO_BASE definition for pcmcia. - */ -#define _IO_BASE 0x80000000 -#define _IO_BASE_SIZE 0x1000 - -#ifdef CONFIG_IDE -#define MAX_HWIFS 1 -#endif - -/* Interrupt level assignments. - */ -#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */ - -/* We don't use the 8259. - */ -#define NR_8259_INTS 0 - -/* CPM Ethernet through SCC1 or SCC2 */ - -#if defined(CONFIG_SCC1_ENET) || defined(CONFIG_MPC8xx_SECOND_ETH_SCC1) /* Probably 860 variant */ -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC1 use. - * TCLK - CLK1, RCLK - CLK2. - */ -#define PA_ENET_RXD ((ushort)0x0001) -#define PA_ENET_TXD ((ushort)0x0002) -#define PA_ENET_TCLK ((ushort)0x0100) -#define PA_ENET_RCLK ((ushort)0x0200) -#define PB_ENET_TENA ((uint)0x00001000) -#define PC_ENET_CLSN ((ushort)0x0010) -#define PC_ENET_RENA ((ushort)0x0020) - -/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to - * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. - */ -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x0000002c) -#endif /* CONFIG_SCC1_ENET */ - -#ifdef CONFIG_SCC2_ENET /* Probably 823/850 variant */ -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC1 use. - * TCLK - CLK1, RCLK - CLK2. - */ -#define PA_ENET_RXD ((ushort)0x0004) -#define PA_ENET_TXD ((ushort)0x0008) -#define PA_ENET_TCLK ((ushort)0x0400) -#define PA_ENET_RCLK ((ushort)0x0200) -#define PB_ENET_TENA ((uint)0x00002000) -#define PC_ENET_CLSN ((ushort)0x0040) -#define PC_ENET_RENA ((ushort)0x0080) - -/* Control bits in the SICR to route TCLK and RCLK to - * SCC2. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. - */ -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00002e00) -#endif /* CONFIG_SCC2_ENET */ - -#endif /* __ASM_FADS_H__ */ -#endif /* __KERNEL__ */ |