diff options
Diffstat (limited to 'arch/ppc/platforms/radstone_ppc7d.c')
| -rw-r--r-- | arch/ppc/platforms/radstone_ppc7d.c | 1492 |
1 files changed, 0 insertions, 1492 deletions
diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c deleted file mode 100644 index f1dee1e8780..00000000000 --- a/arch/ppc/platforms/radstone_ppc7d.c +++ /dev/null @@ -1,1492 +0,0 @@ -/* - * Board setup routines for the Radstone PPC7D boards. - * - * Author: James Chapman <jchapman@katalix.com> - * - * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il - * Based on code done by - Mark A. Greer <mgreer@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/* Radstone PPC7D boards are rugged VME boards with PPC 7447A CPUs, - * Discovery-II, dual gigabit ethernet, dual PMC, USB, keyboard/mouse, - * 4 serial ports, 2 high speed serial ports (MPSCs) and optional - * SCSI / VGA. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/initrd.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/serial.h> -#include <linux/tty.h> /* for linux/serial_core.h */ -#include <linux/serial_core.h> -#include <linux/serial_8250.h> -#include <linux/mv643xx.h> -#include <linux/netdevice.h> -#include <linux/platform_device.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/time.h> -#include <asm/dma.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/prom.h> -#include <asm/smp.h> -#include <asm/vga.h> -#include <asm/open_pic.h> -#include <asm/i8259.h> -#include <asm/todc.h> -#include <asm/bootinfo.h> -#include <asm/mpc10x.h> -#include <asm/pci-bridge.h> -#include <asm/mv64x60.h> - -#include "radstone_ppc7d.h" - -#undef DEBUG - -#define PPC7D_RST_PIN 17 /* GPP17 */ - -extern u32 mv64360_irq_base; -extern spinlock_t rtc_lock; - -static struct mv64x60_handle bh; -static int ppc7d_has_alma; - -extern void gen550_progress(char *, unsigned short); -extern void gen550_init(int, struct uart_port *); - -/* FIXME - move to h file */ -extern int ds1337_do_command(int id, int cmd, void *arg); -#define DS1337_GET_DATE 0 -#define DS1337_SET_DATE 1 - -/* residual data */ -unsigned char __res[sizeof(bd_t)]; - -/***************************************************************************** - * Serial port code - *****************************************************************************/ - -#if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG) -static void __init ppc7d_early_serial_map(void) -{ -#if defined(CONFIG_SERIAL_MPSC_CONSOLE) - mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE); -#elif defined(CONFIG_SERIAL_8250) - struct uart_port serial_req; - - /* Setup serial port access */ - memset(&serial_req, 0, sizeof(serial_req)); - serial_req.uartclk = UART_CLK; - serial_req.irq = 4; - serial_req.flags = STD_COM_FLAGS; - serial_req.iotype = UPIO_MEM; - serial_req.membase = (u_char *) PPC7D_SERIAL_0; - - gen550_init(0, &serial_req); - if (early_serial_setup(&serial_req) != 0) - printk(KERN_ERR "Early serial init of port 0 failed\n"); - - /* Assume early_serial_setup() doesn't modify serial_req */ - serial_req.line = 1; - serial_req.irq = 3; - serial_req.membase = (u_char *) PPC7D_SERIAL_1; - - gen550_init(1, &serial_req); - if (early_serial_setup(&serial_req) != 0) - printk(KERN_ERR "Early serial init of port 1 failed\n"); -#else -#error CONFIG_KGDB || CONFIG_SERIAL_TEXT_DEBUG has no supported CONFIG_SERIAL_XXX -#endif -} -#endif /* CONFIG_KGDB || CONFIG_SERIAL_TEXT_DEBUG */ - -/***************************************************************************** - * Low-level board support code - *****************************************************************************/ - -static unsigned long __init ppc7d_find_end_of_memory(void) -{ - bd_t *bp = (bd_t *) __res; - - if (bp->bi_memsize) - return bp->bi_memsize; - - return (256 * 1024 * 1024); -} - -static void __init ppc7d_map_io(void) -{ - /* remove temporary mapping */ - mtspr(SPRN_DBAT3U, 0x00000000); - mtspr(SPRN_DBAT3L, 0x00000000); - - io_block_mapping(0xe8000000, 0xe8000000, 0x08000000, _PAGE_IO); - io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO); -} - -static void ppc7d_restart(char *cmd) -{ - u32 data; - - /* Disable GPP17 interrupt */ - data = mv64x60_read(&bh, MV64x60_GPP_INTR_MASK); - data &= ~(1 << PPC7D_RST_PIN); - mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, data); - - /* Configure MPP17 as GPP */ - data = mv64x60_read(&bh, MV64x60_MPP_CNTL_2); - data &= ~(0x0000000f << 4); - mv64x60_write(&bh, MV64x60_MPP_CNTL_2, data); - - /* Enable pin GPP17 for output */ - data = mv64x60_read(&bh, MV64x60_GPP_IO_CNTL); - data |= (1 << PPC7D_RST_PIN); - mv64x60_write(&bh, MV64x60_GPP_IO_CNTL, data); - - /* Toggle GPP9 pin to reset the board */ - mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, 1 << PPC7D_RST_PIN); - mv64x60_write(&bh, MV64x60_GPP_VALUE_SET, 1 << PPC7D_RST_PIN); - - for (;;) ; /* Spin until reset happens */ - /* NOTREACHED */ -} - -static void ppc7d_power_off(void) -{ - u32 data; - - local_irq_disable(); - - /* Ensure that internal MV643XX watchdog is disabled. - * The Disco watchdog uses MPP17 on this hardware. - */ - data = mv64x60_read(&bh, MV64x60_MPP_CNTL_2); - data &= ~(0x0000000f << 4); - mv64x60_write(&bh, MV64x60_MPP_CNTL_2, data); - - data = mv64x60_read(&bh, MV64x60_WDT_WDC); - if (data & 0x80000000) { - mv64x60_write(&bh, MV64x60_WDT_WDC, 1 << 24); - mv64x60_write(&bh, MV64x60_WDT_WDC, 2 << 24); - } - - for (;;) ; /* No way to shut power off with software */ - /* NOTREACHED */ -} - -static void ppc7d_halt(void) -{ - ppc7d_power_off(); - /* NOTREACHED */ -} - -static unsigned long ppc7d_led_no_pulse; - -static int __init ppc7d_led_pulse_disable(char *str) -{ - ppc7d_led_no_pulse = 1; - return 1; -} - -/* This kernel option disables the heartbeat pulsing of a board LED */ -__setup("ledoff", ppc7d_led_pulse_disable); - -static void ppc7d_heartbeat(void) -{ - u32 data32; - u8 data8; - static int max706_wdog = 0; - - /* Unfortunately we can't access the LED control registers - * during early init because they're on the CPLD which is the - * other side of a PCI bridge which goes unreachable during - * PCI scan. So write the LEDs only if the MV64360 watchdog is - * enabled (i.e. userspace apps are running so kernel is up).. - */ - data32 = mv64x60_read(&bh, MV64x60_WDT_WDC); - if (data32 & 0x80000000) { - /* Enable MAX706 watchdog if not done already */ - if (!max706_wdog) { - outb(3, PPC7D_CPLD_RESET); - max706_wdog = 1; - } - - /* Hit the MAX706 watchdog */ - outb(0, PPC7D_CPLD_WATCHDOG_TRIG); - - /* Pulse LED DS219 if not disabled */ - if (!ppc7d_led_no_pulse) { - static int led_on = 0; - - data8 = inb(PPC7D_CPLD_LEDS); - if (led_on) - data8 &= ~PPC7D_CPLD_LEDS_DS219_MASK; - else - data8 |= PPC7D_CPLD_LEDS_DS219_MASK; - - outb(data8, PPC7D_CPLD_LEDS); - led_on = !led_on; - } - } - ppc_md.heartbeat_count = ppc_md.heartbeat_reset; -} - -static int ppc7d_show_cpuinfo(struct seq_file *m) -{ - u8 val; - u8 val1, val2; - static int flash_sizes[4] = { 64, 32, 0, 16 }; - static int flash_banks[4] = { 4, 3, 2, 1 }; - static int sdram_bank_sizes[4] = { 128, 256, 512, 1 }; - int sdram_num_banks = 2; - static char *pci_modes[] = { "PCI33", "PCI66", - "Unknown", "Unknown", - "PCIX33", "PCIX66", - "PCIX100", "PCIX133" - }; - - seq_printf(m, "vendor\t\t: Radstone Technology\n"); - seq_printf(m, "machine\t\t: PPC7D\n"); - - val = inb(PPC7D_CPLD_BOARD_REVISION); - val1 = (val & PPC7D_CPLD_BOARD_REVISION_NUMBER_MASK) >> 5; - val2 = (val & PPC7D_CPLD_BOARD_REVISION_LETTER_MASK); - seq_printf(m, "revision\t: %hd%c%c\n", - val1, - (val2 <= 0x18) ? 'A' + val2 : 'Y', - (val2 > 0x18) ? 'A' + (val2 - 0x19) : ' '); - - val = inb(PPC7D_CPLD_MOTHERBOARD_TYPE); - val1 = val & PPC7D_CPLD_MB_TYPE_PLL_MASK; - val2 = val & (PPC7D_CPLD_MB_TYPE_ECC_FITTED_MASK | - PPC7D_CPLD_MB_TYPE_ECC_ENABLE_MASK); - seq_printf(m, "bus speed\t: %dMHz\n", - (val1 == PPC7D_CPLD_MB_TYPE_PLL_133) ? 133 : - (val1 == PPC7D_CPLD_MB_TYPE_PLL_100) ? 100 : - (val1 == PPC7D_CPLD_MB_TYPE_PLL_64) ? 64 : 0); - - val = inb(PPC7D_CPLD_MEM_CONFIG); - if (val & PPC7D_CPLD_SDRAM_BANK_NUM_MASK) sdram_num_banks--; - - val = inb(PPC7D_CPLD_MEM_CONFIG_EXTEND); - val1 = (val & PPC7D_CPLD_SDRAM_BANK_SIZE_MASK) >> 6; - seq_printf(m, "SDRAM\t\t: %d banks of %d%c, total %d%c", - sdram_num_banks, - sdram_bank_sizes[val1], - (sdram_bank_sizes[val1] < 128) ? 'G' : 'M', - sdram_num_banks * sdram_bank_sizes[val1], - (sdram_bank_sizes[val1] < 128) ? 'G' : 'M'); - if (val2 & PPC7D_CPLD_MB_TYPE_ECC_FITTED_MASK) { - seq_printf(m, " [ECC %sabled]", - (val2 & PPC7D_CPLD_MB_TYPE_ECC_ENABLE_MASK) ? "en" : - "dis"); - } - seq_printf(m, "\n"); - - val1 = (val & PPC7D_CPLD_FLASH_DEV_SIZE_MASK); - val2 = (val & PPC7D_CPLD_FLASH_BANK_NUM_MASK) >> 2; - seq_printf(m, "FLASH\t\t: %d banks of %dM, total %dM\n", - flash_banks[val2], flash_sizes[val1], - flash_banks[val2] * flash_sizes[val1]); - - val = inb(PPC7D_CPLD_FLASH_WRITE_CNTL); - val1 = inb(PPC7D_CPLD_SW_FLASH_WRITE_PROTECT); - seq_printf(m, " write links\t: %s%s%s%s\n", - (val & PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK) ? "WRITE " : "", - (val & PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK) ? "BOOT " : "", - (val & PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK) ? "USER " : "", - (val & (PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK | - PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK | - PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK)) == - 0 ? "NONE" : ""); - seq_printf(m, " write sector h/w enables: %s%s%s%s%s\n", - (val & PPD7D_CPLD_FLASH_CNTL_RECO_WR_MASK) ? "RECOVERY " : - "", - (val & PPD7D_CPLD_FLASH_CNTL_BOOT_WR_MASK) ? "BOOT " : "", - (val & PPD7D_CPLD_FLASH_CNTL_USER_WR_MASK) ? "USER " : "", - (val1 & PPC7D_CPLD_FLASH_CNTL_NVRAM_PROT_MASK) ? "NVRAM " : - "", - (((val & - (PPD7D_CPLD_FLASH_CNTL_RECO_WR_MASK | - PPD7D_CPLD_FLASH_CNTL_BOOT_WR_MASK | - PPD7D_CPLD_FLASH_CNTL_BOOT_WR_MASK)) == 0) - && ((val1 & PPC7D_CPLD_FLASH_CNTL_NVRAM_PROT_MASK) == - 0)) ? "NONE" : ""); - val1 = - inb(PPC7D_CPLD_SW_FLASH_WRITE_PROTECT) & - (PPC7D_CPLD_SW_FLASH_WRPROT_SYSBOOT_MASK | - PPC7D_CPLD_SW_FLASH_WRPROT_USER_MASK); - seq_printf(m, " software sector enables: %s%s%s\n", - (val1 & PPC7D_CPLD_SW_FLASH_WRPROT_SYSBOOT_MASK) ? "SYSBOOT " - : "", - (val1 & PPC7D_CPLD_SW_FLASH_WRPROT_USER_MASK) ? "USER " : "", - (val1 == 0) ? "NONE " : ""); - - seq_printf(m, "Boot options\t: %s%s%s%s\n", - (val & PPC7D_CPLD_FLASH_CNTL_ALTBOOT_LINK_MASK) ? - "ALTERNATE " : "", - (val & PPC7D_CPLD_FLASH_CNTL_VMEBOOT_LINK_MASK) ? "VME " : - "", - (val & PPC7D_CPLD_FLASH_CNTL_RECBOOT_LINK_MASK) ? "RECOVERY " - : "", - ((val & - (PPC7D_CPLD_FLASH_CNTL_ALTBOOT_LINK_MASK | - PPC7D_CPLD_FLASH_CNTL_VMEBOOT_LINK_MASK | - PPC7D_CPLD_FLASH_CNTL_RECBOOT_LINK_MASK)) == - 0) ? "NONE" : ""); - - val = inb(PPC7D_CPLD_EQUIPMENT_PRESENT_1); - seq_printf(m, "Fitted modules\t: %s%s%s%s\n", - (val & PPC7D_CPLD_EQPT_PRES_1_PMC1_MASK) ? "" : "PMC1 ", - (val & PPC7D_CPLD_EQPT_PRES_1_PMC2_MASK) ? "" : "PMC2 ", - (val & PPC7D_CPLD_EQPT_PRES_1_AFIX_MASK) ? "AFIX " : "", - ((val & (PPC7D_CPLD_EQPT_PRES_1_PMC1_MASK | - PPC7D_CPLD_EQPT_PRES_1_PMC2_MASK | - PPC7D_CPLD_EQPT_PRES_1_AFIX_MASK)) == - (PPC7D_CPLD_EQPT_PRES_1_PMC1_MASK | - PPC7D_CPLD_EQPT_PRES_1_PMC2_MASK)) ? "NONE" : ""); - - if (val & PPC7D_CPLD_EQPT_PRES_1_AFIX_MASK) { - static const char *ids[] = { - "unknown", - "1553 (Dual Channel)", - "1553 (Single Channel)", - "8-bit SCSI + VGA", - "16-bit SCSI + VGA", - "1553 (Single Channel with sideband)", - "1553 (Dual Channel with sideband)", - NULL - }; - u8 id = __raw_readb((void *)PPC7D_AFIX_REG_BASE + 0x03); - seq_printf(m, "AFIX module\t: 0x%hx [%s]\n", id, - id < 7 ? ids[id] : "unknown"); - } - - val = inb(PPC7D_CPLD_PCI_CONFIG); - val1 = (val & PPC7D_CPLD_PCI_CONFIG_PCI0_MASK) >> 4; - val2 = (val & PPC7D_CPLD_PCI_CONFIG_PCI1_MASK); - seq_printf(m, "PCI#0\t\t: %s\nPCI#1\t\t: %s\n", - pci_modes[val1], pci_modes[val2]); - - val = inb(PPC7D_CPLD_EQUIPMENT_PRESENT_2); - seq_printf(m, "PMC1\t\t: %s\nPMC2\t\t: %s\n", - (val & PPC7D_CPLD_EQPT_PRES_3_PMC1_V_MASK) ? "3.3v" : "5v", - (val & PPC7D_CPLD_EQPT_PRES_3_PMC2_V_MASK) ? "3.3v" : "5v"); - seq_printf(m, "PMC power source: %s\n", - (val & PPC7D_CPLD_EQPT_PRES_3_PMC_POWER_MASK) ? "VME" : - "internal"); - - val = inb(PPC7D_CPLD_EQUIPMENT_PRESENT_4); - val2 = inb(PPC7D_CPLD_EQUIPMENT_PRESENT_2); - seq_printf(m, "Fit options\t: %s%s%s%s%s%s%s\n", - (val & PPC7D_CPLD_EQPT_PRES_4_LPT_MASK) ? "LPT " : "", - (val & PPC7D_CPLD_EQPT_PRES_4_PS2_FITTED) ? "PS2 " : "", - (val & PPC7D_CPLD_EQPT_PRES_4_USB2_FITTED) ? "USB2 " : "", - (val2 & PPC7D_CPLD_EQPT_PRES_2_UNIVERSE_MASK) ? "VME " : "", - (val2 & PPC7D_CPLD_EQPT_PRES_2_COM36_MASK) ? "COM3-6 " : "", - (val2 & PPC7D_CPLD_EQPT_PRES_2_GIGE_MASK) ? "eth0 " : "", - (val2 & PPC7D_CPLD_EQPT_PRES_2_DUALGIGE_MASK) ? "eth1 " : - ""); - - val = inb(PPC7D_CPLD_ID_LINK); - val1 = val & (PPC7D_CPLD_ID_LINK_E6_MASK | - PPC7D_CPLD_ID_LINK_E7_MASK | - PPC7D_CPLD_ID_LINK_E12_MASK | - PPC7D_CPLD_ID_LINK_E13_MASK); - - val = inb(PPC7D_CPLD_FLASH_WRITE_CNTL) & - (PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK | - PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK | - PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK); - - seq_printf(m, "Board links present: %s%s%s%s%s%s%s%s\n", - (val1 & PPC7D_CPLD_ID_LINK_E6_MASK) ? "E6 " : "", - (val1 & PPC7D_CPLD_ID_LINK_E7_MASK) ? "E7 " : "", - (val & PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK) ? "E9 " : "", - (val & PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK) ? "E10 " : "", - (val & PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK) ? "E11 " : "", - (val1 & PPC7D_CPLD_ID_LINK_E12_MASK) ? "E12 " : "", - (val1 & PPC7D_CPLD_ID_LINK_E13_MASK) ? "E13 " : "", - ((val == 0) && (val1 == 0)) ? "NONE" : ""); - - val = inb(PPC7D_CPLD_WDOG_RESETSW_MASK); - seq_printf(m, "Front panel reset switch: %sabled\n", - (val & PPC7D_CPLD_WDOG_RESETSW_MASK) ? "dis" : "en"); - - return 0; -} - -static void __init ppc7d_calibrate_decr(void) -{ - ulong freq; - - freq = 100000000 / 4; - - pr_debug("time_init: decrementer frequency = %lu.%.6lu MHz\n", - freq / 1000000, freq % 1000000); - - tb_ticks_per_jiffy = freq / HZ; - tb_to_us = mulhwu_scale_factor(freq, 1000000); -} - -/***************************************************************************** - * Interrupt stuff - *****************************************************************************/ - -static irqreturn_t ppc7d_i8259_intr(int irq, void *dev_id) -{ - u32 temp = mv64x60_read(&bh, MV64x60_GPP_INTR_CAUSE); - if (temp & (1 << 28)) { - i8259_irq(); - mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, temp & (~(1 << 28))); - return IRQ_HANDLED; - } - - return IRQ_NONE; -} - -/* - * Each interrupt cause is assigned an IRQ number. - * Southbridge has 16*2 (two 8259's) interrupts. - * Discovery-II has 96 interrupts (cause-hi, cause-lo, gpp x 32). - * If multiple interrupts are pending, get_irq() returns the - * lowest pending irq number first. - * - * - * IRQ # Source Trig Active - * ============================================================= - * - * Southbridge - * ----------- - * IRQ # Source Trig - * ============================================================= - * 0 ISA High Resolution Counter Edge - * 1 Keyboard Edge - * 2 Cascade From (IRQ 8-15) Edge - * 3 Com 2 (Uart 2) Edge - * 4 Com 1 (Uart 1) Edge - * 5 PCI Int D/AFIX IRQZ ID4 (2,7) Level - * 6 GPIO Level - * 7 LPT Edge - * 8 RTC Alarm Edge - * 9 PCI Int A/PMC 2/AFIX IRQW ID1 (2,0) Level - * 10 PCI Int B/PMC 1/AFIX IRQX ID2 (2,1) Level - * 11 USB2 Level - * 12 Mouse Edge - * 13 Reserved internally by Ali M1535+ - * 14 PCI Int C/VME/AFIX IRQY ID3 (2,6) Level - * 15 COM 5/6 Level - * - * 16..112 Discovery-II... - * - * MPP28 Southbridge Edge High - * - * - * Interrupts are cascaded through to the Discovery-II. - * - * PCI --- - * \ - * CPLD --> ALI1535 -------> DISCOVERY-II - * INTF MPP28 - */ -static void __init ppc7d_init_irq(void) -{ - int irq; - - pr_debug("%s\n", __func__); - i8259_init(0, 0); - mv64360_init_irq(); - - /* IRQs 5,6,9,10,11,14,15 are level sensitive */ - irq_desc[5].status |= IRQ_LEVEL; - irq_desc[6].status |= IRQ_LEVEL; - irq_desc[9].status |= IRQ_LEVEL; - irq_desc[10].status |= IRQ_LEVEL; - irq_desc[11].status |= IRQ_LEVEL; - irq_desc[14].status |= IRQ_LEVEL; - irq_desc[15].status |= IRQ_LEVEL; - - /* GPP28 is edge triggered */ - irq_desc[mv64360_irq_base + MV64x60_IRQ_GPP28].status &= ~IRQ_LEVEL; -} - -static u32 ppc7d_irq_canonicalize(u32 irq) -{ - if ((irq >= 16) && (irq < (16 + 96))) - irq -= 16; - - return irq; -} - -static int ppc7d_get_irq(void) -{ - int irq; - - irq = mv64360_get_irq(); - if (irq == (mv64360_irq_base + MV64x60_IRQ_GPP28)) - irq = i8259_irq(); - return irq; -} - -/* - * 9 PCI Int A/PMC 2/AFIX IRQW ID1 (2,0) Level - * 10 PCI Int B/PMC 1/AFIX IRQX ID2 (2,1) Level - * 14 PCI Int C/VME/AFIX IRQY ID3 (2,6) Level - * 5 PCI Int D/AFIX IRQZ ID4 (2,7) Level - */ -static int __init ppc7d_map_irq(struct pci_dev *dev, unsigned char idsel, - unsigned char pin) -{ - static const char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {10, 14, 5, 9}, /* IDSEL 10 - PMC2 / AFIX IRQW */ - {9, 10, 14, 5}, /* IDSEL 11 - PMC1 / AFIX IRQX */ - {5, 9, 10, 14}, /* IDSEL 12 - AFIX IRQY */ - {14, 5, 9, 10}, /* IDSEL 13 - AFIX IRQZ */ - }; - const long min_idsel = 10, max_idsel = 14, irqs_per_slot = 4; - - pr_debug("%s: %04x/%04x/%x: idsel=%hx pin=%hu\n", __func__, - dev->vendor, dev->device, PCI_FUNC(dev->devfn), idsel, pin); - - return PCI_IRQ_TABLE_LOOKUP; -} - -void __init ppc7d_intr_setup(void) -{ - u32 data; - - /* - * Define GPP 28 interrupt polarity as active high - * input signal and level triggered - */ - data = mv64x60_read(&bh, MV64x60_GPP_LEVEL_CNTL); - data &= ~(1 << 28); - mv64x60_write(&bh, MV64x60_GPP_LEVEL_CNTL, data); - data = mv64x60_read(&bh, MV64x60_GPP_IO_CNTL); - data &= ~(1 << 28); - mv64x60_write(&bh, MV64x60_GPP_IO_CNTL, data); - - /* Config GPP intr ctlr to respond to level trigger */ - data = mv64x60_read(&bh, MV64x60_COMM_ARBITER_CNTL); - data |= (1 << 10); - mv64x60_write(&bh, MV64x60_COMM_ARBITER_CNTL, data); - - /* XXXX Erranum FEr PCI-#8 */ - data = mv64x60_read(&bh, MV64x60_PCI0_CMD); - data &= ~((1 << 5) | (1 << 9)); - mv64x60_write(&bh, MV64x60_PCI0_CMD, data); - data = mv64x60_read(&bh, MV64x60_PCI1_CMD); - data &= ~((1 << 5) | (1 << 9)); - mv64x60_write(&bh, MV64x60_PCI1_CMD, data); - - /* - * Dismiss and then enable interrupt on GPP interrupt cause - * for CPU #0 - */ - mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~(1 << 28)); - data = mv64x60_read(&bh, MV64x60_GPP_INTR_MASK); - data |= (1 << 28); - mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, data); - - /* - * Dismiss and then enable interrupt on CPU #0 high cause reg - * BIT27 summarizes GPP interrupts 23-31 - */ - mv64x60_write(&bh, MV64360_IC_MAIN_CAUSE_HI, ~(1 << 27)); - data = mv64x60_read(&bh, MV64360_IC_CPU0_INTR_MASK_HI); - data |= (1 << 27); - mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI, data); -} - -/***************************************************************************** - * Platform device data fixup routines. - *****************************************************************************/ - -#if defined(CONFIG_SERIAL_MPSC) -static void __init ppc7d_fixup_mpsc_pdata(struct platform_device *pdev) -{ - struct mpsc_pdata *pdata; - - pdata = (struct mpsc_pdata *)pdev->dev.platform_data; - - pdata->max_idle = 40; - pdata->default_baud = PPC7D_DEFAULT_BAUD; - pdata->brg_clk_src = PPC7D_MPSC_CLK_SRC; - pdata->brg_clk_freq = PPC7D_MPSC_CLK_FREQ; - - return; -} -#endif - -#if defined(CONFIG_MV643XX_ETH) -static void __init ppc7d_fixup_eth_pdata(struct platform_device *pdev) -{ - struct mv643xx_eth_platform_data *eth_pd; - static u16 phy_addr[] = { - PPC7D_ETH0_PHY_ADDR, - PPC7D_ETH1_PHY_ADDR, - PPC7D_ETH2_PHY_ADDR, - }; - int i; - - eth_pd = pdev->dev.platform_data; - eth_pd->force_phy_addr = 1; - eth_pd->phy_addr = phy_addr[pdev->id]; - eth_pd->tx_queue_size = PPC7D_ETH_TX_QUEUE_SIZE; - eth_pd->rx_queue_size = PPC7D_ETH_RX_QUEUE_SIZE; - - /* Adjust IRQ by mv64360_irq_base */ - for (i = 0; i < pdev->num_resources; i++) { - struct resource *r = &pdev->resource[i]; - - if (r->flags & IORESOURCE_IRQ) { - r->start += mv64360_irq_base; - r->end += mv64360_irq_base; - pr_debug("%s, uses IRQ %d\n", pdev->name, - (int)r->start); - } - } - -} -#endif - -#if defined(CONFIG_I2C_MV64XXX) -static void __init -ppc7d_fixup_i2c_pdata(struct platform_device *pdev) -{ - struct mv64xxx_i2c_pdata *pdata; - int i; - - pdata = pdev->dev.platform_data; - if (pdata == NULL) { - pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); - if (pdata == NULL) - return; - - pdev->dev.platform_data = pdata; - } - - /* divisors M=8, N=3 for 100kHz I2C from 133MHz system clock */ - pdata->freq_m = 8; - pdata->freq_n = 3; - pdata->timeout = 500; - pdata->retries = 3; - - /* Adjust IRQ by mv64360_irq_base */ - for (i = 0; i < pdev->num_resources; i++) { - struct resource *r = &pdev->resource[i]; - - if (r->flags & IORESOURCE_IRQ) { - r->start += mv64360_irq_base; - r->end += mv64360_irq_base; - pr_debug("%s, uses IRQ %d\n", pdev->name, (int) r->start); - } - } -} -#endif - -static int ppc7d_platform_notify(struct device *dev) -{ - static struct { - char *bus_id; - void ((*rtn) (struct platform_device * pdev)); - } dev_map[] = { -#if defined(CONFIG_SERIAL_MPSC) - { MPSC_CTLR_NAME ".0", ppc7d_fixup_mpsc_pdata }, - { MPSC_CTLR_NAME ".1", ppc7d_fixup_mpsc_pdata }, -#endif -#if defined(CONFIG_MV643XX_ETH) - { MV643XX_ETH_NAME ".0", ppc7d_fixup_eth_pdata }, - { MV643XX_ETH_NAME ".1", ppc7d_fixup_eth_pdata }, - { MV643XX_ETH_NAME ".2", ppc7d_fixup_eth_pdata }, -#endif -#if defined(CONFIG_I2C_MV64XXX) - { MV64XXX_I2C_CTLR_NAME ".0", ppc7d_fixup_i2c_pdata }, -#endif - }; - struct platform_device *pdev; - int i; - - if (dev && dev->bus_id) - for (i = 0; i < ARRAY_SIZE(dev_map); i++) - if (!strncmp(dev->bus_id, dev_map[i].bus_id, - BUS_ID_SIZE)) { - - pdev = container_of(dev, - struct platform_device, - dev); - dev_map[i].rtn(pdev); - } - - return 0; -} - -/***************************************************************************** - * PCI device fixups. - * These aren't really fixups per se. They are used to init devices as they - * are found during PCI scan. - * - * The PPC7D has an HB8 PCI-X bridge which must be set up during a PCI - * scan in order to find other devices on its secondary side. - *****************************************************************************/ - -static void __init ppc7d_fixup_hb8(struct pci_dev *dev) -{ - u16 val16; - - if (dev->bus->number == 0) { - pr_debug("PCI: HB8 init\n"); - - pci_write_config_byte(dev, 0x1c, - ((PPC7D_PCI0_IO_START_PCI_ADDR & 0xf000) - >> 8) | 0x01); - pci_write_config_byte(dev, 0x1d, - (((PPC7D_PCI0_IO_START_PCI_ADDR + - PPC7D_PCI0_IO_SIZE - - 1) & 0xf000) >> 8) | 0x01); - pci_write_config_word(dev, 0x30, - PPC7D_PCI0_IO_START_PCI_ADDR >> 16); - pci_write_config_word(dev, 0x32, - ((PPC7D_PCI0_IO_START_PCI_ADDR + - PPC7D_PCI0_IO_SIZE - - 1) >> 16) & 0xffff); - - pci_write_config_word(dev, 0x20, - PPC7D_PCI0_MEM0_START_PCI_LO_ADDR >> 16); - pci_write_config_word(dev, 0x22, - ((PPC7D_PCI0_MEM0_START_PCI_LO_ADDR + - PPC7D_PCI0_MEM0_SIZE - - 1) >> 16) & 0xffff); - pci_write_config_word(dev, 0x24, 0); - pci_write_config_word(dev, 0x26, 0); - pci_write_config_dword(dev, 0x28, 0); - pci_write_config_dword(dev, 0x2c, 0); - - pci_read_config_word(dev, 0x3e, &val16); - val16 |= ((1 << 5) | (1 << 1)); /* signal master aborts and - * SERR to primary - */ - val16 &= ~(1 << 2); /* ISA disable, so all ISA - * ports forwarded to secondary - */ - pci_write_config_word(dev, 0x3e, val16); - } -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0028, ppc7d_fixup_hb8); - -/* This should perhaps be a separate driver as we're actually initializing - * the chip for this board here. It's hardly a fixup... - */ -static void __init ppc7d_fixup_ali1535(struct pci_dev *dev) -{ - pr_debug("PCI: ALI1535 init\n"); - - if (dev->bus->number == 1) { - /* Configure the ISA Port Settings */ - pci_write_config_byte(dev, 0x43, 0x00); - - /* Disable PCI Interrupt polling mode */ - pci_write_config_byte(dev, 0x45, 0x00); - - /* Multifunction pin select INTFJ -> INTF */ - pci_write_config_byte(dev, 0x78, 0x00); - - /* Set PCI INT -> IRQ Routing control in for external - * pins south bridge. - */ - pci_write_config_byte(dev, 0x48, 0x31); /* [7-4] INT B -> IRQ10 - * [3-0] INT A -> IRQ9 - */ - pci_write_config_byte(dev, 0x49, 0x5D); /* [7-4] INT D -> IRQ5 - * [3-0] INT C -> IRQ14 - */ - - /* PPC7D setup */ - /* NEC USB device on IRQ 11 (INTE) - INTF disabled */ - pci_write_config_byte(dev, 0x4A, 0x09); - - /* GPIO on IRQ 6 */ - pci_write_config_byte(dev, 0x76, 0x07); - - /* SIRQ I (COMS 5/6) use IRQ line 15. - * Positive (not subtractive) address decode. - */ - pci_write_config_byte(dev, 0x44, 0x0f); - - /* SIRQ II disabled */ - pci_write_config_byte(dev, 0x75, 0x0); - - /* On board USB and RTC disabled */ - pci_write_config_word(dev, 0x52, (1 << 14)); - pci_write_config_byte(dev, 0x74, 0x00); - - /* On board IDE disabled */ - pci_write_config_byte(dev, 0x58, 0x00); - - /* Decode 32-bit addresses */ - pci_write_config_byte(dev, 0x5b, 0); - - /* Disable docking IO */ - pci_write_config_word(dev, 0x5c, 0x0000); - - /* Disable modem, enable sound */ - pci_write_config_byte(dev, 0x77, (1 << 6)); - - /* Disable hot-docking mode */ - pci_write_config_byte(dev, 0x7d, 0x00); - } -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1533, ppc7d_fixup_ali1535); - -static int ppc7d_pci_exclude_device(u8 bus, u8 devfn) -{ - /* Early versions of this board were fitted with IBM ALMA - * PCI-VME bridge chips. The PCI config space of these devices - * was not set up correctly and causes PCI scan problems. - */ - if ((bus == 1) && (PCI_SLOT(devfn) == 4) && ppc7d_has_alma) - return PCIBIOS_DEVICE_NOT_FOUND; - - return mv64x60_pci_exclude_device(bus, devfn); -} - -/* This hook is called when each PCI bus is probed. - */ -static void ppc7d_pci_fixup_bus(struct pci_bus *bus) -{ - pr_debug("PCI BUS %hu: %lx/%lx %lx/%lx %lx/%lx %lx/%lx\n", - bus->number, - bus->resource[0] ? bus->resource[0]->start : 0, - bus->resource[0] ? bus->resource[0]->end : 0, - bus->resource[1] ? bus->resource[1]->start : 0, - bus->resource[1] ? bus->resource[1]->end : 0, - bus->resource[2] ? bus->resource[2]->start : 0, - bus->resource[2] ? bus->resource[2]->end : 0, - bus->resource[3] ? bus->resource[3]->start : 0, - bus->resource[3] ? bus->resource[3]->end : 0); - - if ((bus->number == 1) && (bus->resource[2] != NULL)) { - /* Hide PCI window 2 of Bus 1 which is used only to - * map legacy ISA memory space. - */ - bus->resource[2]->start = 0; - bus->resource[2]->end = 0; - bus->resource[2]->flags = 0; - } -} - -/***************************************************************************** - * Board device setup code - *****************************************************************************/ - -void __init ppc7d_setup_peripherals(void) -{ - u32 val32; - - /* Set up windows for boot CS */ - mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN, - PPC7D_BOOT_WINDOW_BASE, PPC7D_BOOT_WINDOW_SIZE, - 0); - bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN); - - /* Boot firmware configures the following DevCS addresses. - * DevCS0 - board control/status - * DevCS1 - test registers - * DevCS2 - AFIX port/address registers (for identifying) - * DevCS3 - FLASH - * - * We don't use DevCS0, DevCS1. - */ - val32 = mv64x60_read(&bh, MV64360_CPU_BAR_ENABLE); - val32 |= ((1 << 4) | (1 << 5)); - mv64x60_write(&bh, MV64360_CPU_BAR_ENABLE, val32); - mv64x60_write(&bh, MV64x60_CPU2DEV_0_BASE, 0); - mv64x60_write(&bh, MV64x60_CPU2DEV_0_SIZE, 0); - mv64x60_write(&bh, MV64x60_CPU2DEV_1_BASE, 0); - mv64x60_write(&bh, MV64x60_CPU2DEV_1_SIZE, 0); - - mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN, - PPC7D_AFIX_REG_BASE, PPC7D_AFIX_REG_SIZE, 0); - bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN); - - mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN, - PPC7D_FLASH_BASE, PPC7D_FLASH_SIZE_ACTUAL, 0); - bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN); - - mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN, - PPC7D_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, - 0); - bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN); - - /* Set up Enet->SRAM window */ - mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN, - PPC7D_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, - 0x2); - bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN); - - /* Give enet r/w access to memory region */ - val32 = mv64x60_read(&bh, MV64360_ENET2MEM_ACC_PROT_0); - val32 |= (0x3 << (4 << 1)); - mv64x60_write(&bh, MV64360_ENET2MEM_ACC_PROT_0, val32); - val32 = mv64x60_read(&bh, MV64360_ENET2MEM_ACC_PROT_1); - val32 |= (0x3 << (4 << 1)); - mv64x60_write(&bh, MV64360_ENET2MEM_ACC_PROT_1, val32); - val32 = mv64x60_read(&bh, MV64360_ENET2MEM_ACC_PROT_2); - val32 |= (0x3 << (4 << 1)); - mv64x60_write(&bh, MV64360_ENET2MEM_ACC_PROT_2, val32); - - val32 = mv64x60_read(&bh, MV64x60_TIMR_CNTR_0_3_CNTL); - val32 &= ~((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24)); - mv64x60_write(&bh, MV64x60_TIMR_CNTR_0_3_CNTL, val32); - - /* Enumerate pci bus. - * - * We scan PCI#0 first (the bus with the HB8 and other - * on-board peripherals). We must configure the 64360 before - * each scan, according to the bus number assignments. Busses - * are assigned incrementally, starting at 0. PCI#0 is - * usually assigned bus#0, the secondary side of the HB8 gets - * bus#1 and PCI#1 (second PMC site) gets bus#2. However, if - * any PMC card has a PCI bridge, these bus assignments will - * change. - */ - - /* Turn off PCI retries */ - val32 = mv64x60_read(&bh, MV64x60_CPU_CONFIG); - val32 |= (1 << 17); - mv64x60_write(&bh, MV64x60_CPU_CONFIG, val32); - - /* Scan PCI#0 */ - mv64x60_set_bus(&bh, 0, 0); - bh.hose_a->first_busno = 0; - bh.hose_a->last_busno = 0xff; - bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0); - printk(KERN_INFO "PCI#0: first=%d last=%d\n", - bh.hose_a->first_busno, bh.hose_a->last_busno); - - /* Scan PCI#1 */ - bh.hose_b->first_busno = bh.hose_a->last_busno + 1; - mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno); - bh.hose_b->last_busno = 0xff; - bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b, - bh.hose_b->first_busno); - printk(KERN_INFO "PCI#1: first=%d last=%d\n", - bh.hose_b->first_busno, bh.hose_b->last_busno); - - /* Turn on PCI retries */ - val32 = mv64x60_read(&bh, MV64x60_CPU_CONFIG); - val32 &= ~(1 << 17); - mv64x60_write(&bh, MV64x60_CPU_CONFIG, val32); - - /* Setup interrupts */ - ppc7d_intr_setup(); -} - -static void __init ppc7d_setup_bridge(void) -{ - struct mv64x60_setup_info si; - int i; - u32 temp; - - mv64360_irq_base = 16; /* first 16 intrs are 2 x 8259's */ - - memset(&si, 0, sizeof(si)); - - si.phys_reg_base = CONFIG_MV64X60_NEW_BASE; - - si.pci_0.enable_bus = 1; - si.pci_0.pci_io.cpu_base = PPC7D_PCI0_IO_START_PROC_ADDR; - si.pci_0.pci_io.pci_base_hi = 0; - si.pci_0.pci_io.pci_base_lo = PPC7D_PCI0_IO_START_PCI_ADDR; - si.pci_0.pci_io.size = PPC7D_PCI0_IO_SIZE; - si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE; - si.pci_0.pci_mem[0].cpu_base = PPC7D_PCI0_MEM0_START_PROC_ADDR; - si.pci_0.pci_mem[0].pci_base_hi = PPC7D_PCI0_MEM0_START_PCI_HI_ADDR; - si.pci_0.pci_mem[0].pci_base_lo = PPC7D_PCI0_MEM0_START_PCI_LO_ADDR; - si.pci_0.pci_mem[0].size = PPC7D_PCI0_MEM0_SIZE; - si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE; - si.pci_0.pci_mem[1].cpu_base = PPC7D_PCI0_MEM1_START_PROC_ADDR; - si.pci_0.pci_mem[1].pci_base_hi = PPC7D_PCI0_MEM1_START_PCI_HI_ADDR; - si.pci_0.pci_mem[1].pci_base_lo = PPC7D_PCI0_MEM1_START_PCI_LO_ADDR; - si.pci_0.pci_mem[1].size = PPC7D_PCI0_MEM1_SIZE; - si.pci_0.pci_mem[1].swap = MV64x60_CPU2PCI_SWAP_NONE; - si.pci_0.pci_cmd_bits = 0; - si.pci_0.latency_timer = 0x80; - - si.pci_1.enable_bus = 1; - si.pci_1.pci_io.cpu_base = PPC7D_PCI1_IO_START_PROC_ADDR; - si.pci_1.pci_io.pci_base_hi = 0; - si.pci_1.pci_io.pci_base_lo = PPC7D_PCI1_IO_START_PCI_ADDR; - si.pci_1.pci_io.size = PPC7D_PCI1_IO_SIZE; - si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE; - si.pci_1.pci_mem[0].cpu_base = PPC7D_PCI1_MEM0_START_PROC_ADDR; - si.pci_1.pci_mem[0].pci_base_hi = PPC7D_PCI1_MEM0_START_PCI_HI_ADDR; - si.pci_1.pci_mem[0].pci_base_lo = PPC7D_PCI1_MEM0_START_PCI_LO_ADDR; - si.pci_1.pci_mem[0].size = PPC7D_PCI1_MEM0_SIZE; - si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE; - si.pci_1.pci_mem[1].cpu_base = PPC7D_PCI1_MEM1_START_PROC_ADDR; - si.pci_1.pci_mem[1].pci_base_hi = PPC7D_PCI1_MEM1_START_PCI_HI_ADDR; - si.pci_1.pci_mem[1].pci_base_lo = PPC7D_PCI1_MEM1_START_PCI_LO_ADDR; - si.pci_1.pci_mem[1].size = PPC7D_PCI1_MEM1_SIZE; - si.pci_1.pci_mem[1].swap = MV64x60_CPU2PCI_SWAP_NONE; - si.pci_1.pci_cmd_bits = 0; - si.pci_1.latency_timer = 0x80; - - /* Don't clear the SRAM window since we use it for debug */ - si.window_preserve_mask_32_lo = (1 << MV64x60_CPU2SRAM_WIN); - - printk(KERN_INFO "PCI: MV64360 PCI#0 IO at %x, size %x\n", - si.pci_0.pci_io.cpu_base, si.pci_0.pci_io.size); - printk(KERN_INFO "PCI: MV64360 PCI#1 IO at %x, size %x\n", - si.pci_1.pci_io.cpu_base, si.pci_1.pci_io.size); - - for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) { -#if defined(CONFIG_NOT_COHERENT_CACHE) - si.cpu_prot_options[i] = 0; - si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; - si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; - si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; - - si.pci_0.acc_cntl_options[i] = - MV64360_PCI_ACC_CNTL_SNOOP_NONE | - MV64360_PCI_ACC_CNTL_SWAP_NONE | - MV64360_PCI_ACC_CNTL_MBURST_128_BYTES | - MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES; - - si.pci_1.acc_cntl_options[i] = - MV64360_PCI_ACC_CNTL_SNOOP_NONE | - MV64360_PCI_ACC_CNTL_SWAP_NONE | - MV64360_PCI_ACC_CNTL_MBURST_128_BYTES | - MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES; -#else - si.cpu_prot_options[i] = 0; - /* All PPC7D hardware uses B0 or newer MV64360 silicon which - * does not have snoop bugs. - */ - si.enet_options[i] = MV64360_ENET2MEM_SNOOP_WB; - si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_WB; - si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_WB; - - si.pci_0.acc_cntl_options[i] = - MV64360_PCI_ACC_CNTL_SNOOP_WB | - MV64360_PCI_ACC_CNTL_SWAP_NONE | - MV64360_PCI_ACC_CNTL_MBURST_32_BYTES | - MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES; - - si.pci_1.acc_cntl_options[i] = - MV64360_PCI_ACC_CNTL_SNOOP_WB | - MV64360_PCI_ACC_CNTL_SWAP_NONE | - MV64360_PCI_ACC_CNTL_MBURST_32_BYTES | - MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES; -#endif - } - - /* Lookup PCI host bridges */ - if (mv64x60_init(&bh, &si)) - printk(KERN_ERR "MV64360 initialization failed.\n"); - - pr_debug("MV64360 regs @ %lx/%p\n", bh.p_base, bh.v_base); - - /* Enable WB Cache coherency on SRAM */ - temp = mv64x60_read(&bh, MV64360_SRAM_CONFIG); - pr_debug("SRAM_CONFIG: %x\n", temp); -#if defined(CONFIG_NOT_COHERENT_CACHE) - mv64x60_write(&bh, MV64360_SRAM_CONFIG, temp & ~0x2); -#else - mv64x60_write(&bh, MV64360_SRAM_CONFIG, temp | 0x2); -#endif - /* If system operates with internal bus arbiter (CPU master - * control bit8) clear AACK Delay bit [25] in CPU - * configuration register. - */ - temp = mv64x60_read(&bh, MV64x60_CPU_MASTER_CNTL); - if (temp & (1 << 8)) { - temp = mv64x60_read(&bh, MV64x60_CPU_CONFIG); - mv64x60_write(&bh, MV64x60_CPU_CONFIG, (temp & ~(1 << 25))); - } - - /* Data and address parity is enabled */ - temp = mv64x60_read(&bh, MV64x60_CPU_CONFIG); - mv64x60_write(&bh, MV64x60_CPU_CONFIG, - (temp | (1 << 26) | (1 << 19))); - - pci_dram_offset = 0; /* sys mem at same addr on PCI & cpu bus */ - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = ppc7d_map_irq; - ppc_md.pci_exclude_device = ppc7d_pci_exclude_device; - - mv64x60_set_bus(&bh, 0, 0); - bh.hose_a->first_busno = 0; - bh.hose_a->last_busno = 0xff; - bh.hose_a->mem_space.start = PPC7D_PCI0_MEM0_START_PCI_LO_ADDR; - bh.hose_a->mem_space.end = - PPC7D_PCI0_MEM0_START_PCI_LO_ADDR + PPC7D_PCI0_MEM0_SIZE; - - /* These will be set later, as a result of PCI0 scan */ - bh.hose_b->first_busno = 0; - bh.hose_b->last_busno = 0xff; - bh.hose_b->mem_space.start = PPC7D_PCI1_MEM0_START_PCI_LO_ADDR; - bh.hose_b->mem_space.end = - PPC7D_PCI1_MEM0_START_PCI_LO_ADDR + PPC7D_PCI1_MEM0_SIZE; - - pr_debug("MV64360: PCI#0 IO decode %08x/%08x IO remap %08x\n", - mv64x60_read(&bh, 0x48), mv64x60_read(&bh, 0x50), - mv64x60_read(&bh, 0xf0)); -} - -static void __init ppc7d_setup_arch(void) -{ - int port; - - loops_per_jiffy = 100000000 / HZ; - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif - - if ((cur_cpu_spec->cpu_features & CPU_FTR_SPEC7450) || - (cur_cpu_spec->cpu_features & CPU_FTR_L3CR)) - /* 745x is different. We only want to pass along enable. */ - _set_L2CR(L2CR_L2E); - else if (cur_cpu_spec->cpu_features & CPU_FTR_L2CR) - /* All modules have 1MB of L2. We also assume that an - * L2 divisor of 3 will work. - */ - _set_L2CR(L2CR_L2E | L2CR_L2SIZ_1MB | L2CR_L2CLK_DIV3 - | L2CR_L2RAM_PIPE | L2CR_L2OH_1_0 | L2CR_L2DF); - - if (cur_cpu_spec->cpu_features & CPU_FTR_L3CR) - /* No L3 cache */ - _set_L3CR(0); - -#ifdef CONFIG_DUMMY_CONSOLE - conswitchp = &dummy_con; -#endif - - /* Lookup PCI host bridges */ - if (ppc_md.progress) - ppc_md.progress("ppc7d_setup_arch: calling setup_bridge", 0); - - ppc7d_setup_bridge(); - ppc7d_setup_peripherals(); - - /* Disable ethernet. It might have been setup by the bootrom */ - for (port = 0; port < 3; port++) - mv64x60_write(&bh, MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port), - 0x0000ff00); - - /* Clear queue pointers to ensure they are all initialized, - * otherwise since queues 1-7 are unused, they have random - * pointers which look strange in register dumps. Don't bother - * with queue 0 since it will be initialized later. - */ - for (port = 0; port < 3; port++) { - mv64x60_write(&bh, - MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port), - 0x00000000); - mv64x60_write(&bh, - MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port), - 0x00000000); - mv64x60_write(&bh, - MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port), - 0x00000000); - mv64x60_write(&bh, - MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port), - 0x00000000); - mv64x60_write(&bh, - MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port), - 0x00000000); - mv64x60_write(&bh, - MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port), - 0x00000000); - mv64x60_write(&bh, - MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port), - 0x00000000); - } - - printk(KERN_INFO "Radstone Technology PPC7D\n"); - if (ppc_md.progress) - ppc_md.progress("ppc7d_setup_arch: exit", 0); - -} - -/* Real Time Clock support. - * PPC7D has a DS1337 accessed by I2C. - */ -static ulong ppc7d_get_rtc_time(void) -{ - struct rtc_time tm; - int result; - - spin_lock(&rtc_lock); - result = ds1337_do_command(0, DS1337_GET_DATE, &tm); - spin_unlock(&rtc_lock); - - if (result == 0) - result = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec); - - return result; -} - -static int ppc7d_set_rtc_time(unsigned long nowtime) -{ - struct rtc_time tm; - int result; - - spin_lock(&rtc_lock); - to_tm(nowtime, &tm); - result = ds1337_do_command(0, DS1337_SET_DATE, &tm); - spin_unlock(&rtc_lock); - - return result; -} - -/* This kernel command line parameter can be used to have the target - * wait for a JTAG debugger to attach. Of course, a JTAG debugger - * with hardware breakpoint support can have the target stop at any - * location during init, but this is a convenience feature that makes - * it easier in the common case of loading the code using the ppcboot - * bootloader.. - */ -static unsigned long ppc7d_wait_debugger; - -static int __init ppc7d_waitdbg(char *str) -{ - ppc7d_wait_debugger = 1; - return 1; -} - -__setup("waitdbg", ppc7d_waitdbg); - -/* Second phase board init, called after other (architecture common) - * low-level services have been initialized. - */ -static void ppc7d_init2(void) -{ - unsigned long flags; - u32 data; - u8 data8; - - pr_debug("%s: enter\n", __func__); - - /* Wait for debugger? */ - if (ppc7d_wait_debugger) { - printk("Waiting for debugger...\n"); - - while (readl(&ppc7d_wait_debugger)) ; - } - - /* Hook up i8259 interrupt which is connected to GPP28 */ - request_irq(mv64360_irq_base + MV64x60_IRQ_GPP28, ppc7d_i8259_intr, - IRQF_DISABLED, "I8259 (GPP28) interrupt", (void *)0); - - /* Configure MPP16 as watchdog NMI, MPP17 as watchdog WDE */ - spin_lock_irqsave(&mv64x60_lock, flags); - data = mv64x60_read(&bh, MV64x60_MPP_CNTL_2); - data &= ~(0x0000000f << 0); - data |= (0x00000004 << 0); - data &= ~(0x0000000f << 4); - data |= (0x00000004 << 4); - mv64x60_write(&bh, MV64x60_MPP_CNTL_2, data); - spin_unlock_irqrestore(&mv64x60_lock, flags); - - /* All LEDs off */ - data8 = inb(PPC7D_CPLD_LEDS); - data8 &= ~0x08; - data8 |= 0x07; - outb(data8, PPC7D_CPLD_LEDS); - - /* Hook up RTC. We couldn't do this earlier because we need the I2C subsystem */ - ppc_md.set_rtc_time = ppc7d_set_rtc_time; - ppc_md.get_rtc_time = ppc7d_get_rtc_time; - - pr_debug("%s: exit\n", __func__); -} - -/* Called from machine_init(), early, before any of the __init functions - * have run. We must init software-configurable pins before other functions - * such as interrupt controllers are initialised. - */ -void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - u8 val8; - u8 rev_num; - - /* Map 0xe0000000-0xffffffff early because we need access to SRAM - * and the ISA memory space (for serial port) here. This mapping - * is redone properly in ppc7d_map_io() later. - */ - mtspr(SPRN_DBAT3U, 0xe0003fff); - mtspr(SPRN_DBAT3L, 0xe000002a); - - /* - * Zero SRAM. Note that this generates parity errors on - * internal data path in SRAM if it's first time accessing it - * after reset. - * - * We do this ASAP to avoid parity errors when reading - * uninitialized SRAM. - */ - memset((void *)PPC7D_INTERNAL_SRAM_BASE, 0, MV64360_SRAM_SIZE); - - pr_debug("platform_init: r3-r7: %lx %lx %lx %lx %lx\n", - r3, r4, r5, r6, r7); - - parse_bootinfo(find_bootinfo()); - - /* ASSUMPTION: If both r3 (bd_t pointer) and r6 (cmdline pointer) - * are non-zero, then we should use the board info from the bd_t - * structure and the cmdline pointed to by r6 instead of the - * information from birecs, if any. Otherwise, use the information - * from birecs as discovered by the preceding call to - * parse_bootinfo(). This rule should work with both PPCBoot, which - * uses a bd_t board info structure, and the kernel boot wrapper, - * which uses birecs. - */ - if (r3 && r6) { - bd_t *bp = (bd_t *) __res; - - /* copy board info structure */ - memcpy((void *)__res, (void *)(r3 + KERNELBASE), sizeof(bd_t)); - /* copy command line */ - *(char *)(r7 + KERNELBASE) = 0; - strcpy(cmd_line, (char *)(r6 + KERNELBASE)); - - printk(KERN_INFO "Board info data:-\n"); - printk(KERN_INFO " Internal freq: %lu MHz, bus freq: %lu MHz\n", - bp->bi_intfreq, bp->bi_busfreq); - printk(KERN_INFO " Memory: %lx, size %lx\n", bp->bi_memstart, - bp->bi_memsize); - printk(KERN_INFO " Console baudrate: %lu\n", bp->bi_baudrate); - printk(KERN_INFO " Ethernet address: " - "%02x:%02x:%02x:%02x:%02x:%02x\n", - bp->bi_enetaddr[0], bp->bi_enetaddr[1], - bp->bi_enetaddr[2], bp->bi_enetaddr[3], - bp->bi_enetaddr[4], bp->bi_enetaddr[5]); - } -#ifdef CONFIG_BLK_DEV_INITRD - /* take care of initrd if we have one */ - if (r4) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - printk(KERN_INFO "INITRD @ %lx/%lx\n", initrd_start, initrd_end); - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Map in board regs, etc. */ - isa_io_base = 0xe8000000; - isa_mem_base = 0xe8000000; - pci_dram_offset = 0x00000000; - ISA_DMA_THRESHOLD = 0x00ffffff; - DMA_MODE_READ = 0x44; - DMA_MODE_WRITE = 0x48; - - ppc_md.setup_arch = ppc7d_setup_arch; - ppc_md.init = ppc7d_init2; - ppc_md.show_cpuinfo = ppc7d_show_cpuinfo; - /* XXX this is broken... */ - ppc_md.irq_canonicalize = ppc7d_irq_canonicalize; - ppc_md.init_IRQ = ppc7d_init_irq; - ppc_md.get_irq = ppc7d_get_irq; - - ppc_md.restart = ppc7d_restart; - ppc_md.power_off = ppc7d_power_off; - ppc_md.halt = ppc7d_halt; - - ppc_md.find_end_of_memory = ppc7d_find_end_of_memory; - ppc_md.setup_io_mappings = ppc7d_map_io; - - ppc_md.time_init = NULL; - ppc_md.set_rtc_time = NULL; - ppc_md.get_rtc_time = NULL; - ppc_md.calibrate_decr = ppc7d_calibrate_decr; - ppc_md.nvram_read_val = NULL; - ppc_md.nvram_write_val = NULL; - - ppc_md.heartbeat = ppc7d_heartbeat; - ppc_md.heartbeat_reset = HZ; - ppc_md.heartbeat_count = ppc_md.heartbeat_reset; - - ppc_md.pcibios_fixup_bus = ppc7d_pci_fixup_bus; - -#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH) || \ - defined(CONFIG_I2C_MV64XXX) - platform_notify = ppc7d_platform_notify; -#endif - -#ifdef CONFIG_SERIAL_MPSC - /* On PPC7D, we must configure MPSC support via CPLD control - * registers. - */ - outb(PPC7D_CPLD_RTS_COM4_SCLK | - PPC7D_CPLD_RTS_COM56_ENABLED, PPC7D_CPLD_RTS); - outb(PPC7D_CPLD_COMS_COM3_TCLKEN | - PPC7D_CPLD_COMS_COM3_TXEN | - PPC7D_CPLD_COMS_COM4_TCLKEN | - PPC7D_CPLD_COMS_COM4_TXEN, PPC7D_CPLD_COMS); -#endif /* CONFIG_SERIAL_MPSC */ - -#if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG) - ppc7d_early_serial_map(); -#ifdef CONFIG_SERIAL_TEXT_DEBUG -#if defined(CONFIG_SERIAL_MPSC_CONSOLE) - ppc_md.progress = mv64x60_mpsc_progress; -#elif defined(CONFIG_SERIAL_8250) - ppc_md.progress = gen550_progress; -#else -#error CONFIG_KGDB || CONFIG_SERIAL_TEXT_DEBUG has no supported CONFIG_SERIAL_XXX -#endif /* CONFIG_SERIAL_8250 */ -#endif /* CONFIG_SERIAL_TEXT_DEBUG */ -#endif /* CONFIG_KGDB || CONFIG_SERIAL_TEXT_DEBUG */ - - /* Enable write access to user flash. This is necessary for - * flash probe. - */ - val8 = readb((void *)isa_io_base + PPC7D_CPLD_SW_FLASH_WRITE_PROTECT); - writeb(val8 | (PPC7D_CPLD_SW_FLASH_WRPROT_ENABLED & - PPC7D_CPLD_SW_FLASH_WRPROT_USER_MASK), - (void *)isa_io_base + PPC7D_CPLD_SW_FLASH_WRITE_PROTECT); - - /* Determine if this board has IBM ALMA VME devices */ - val8 = readb((void *)isa_io_base + PPC7D_CPLD_BOARD_REVISION); - rev_num = (val8 & PPC7D_CPLD_BOARD_REVISION_NUMBER_MASK) >> 5; - if (rev_num <= 1) - ppc7d_has_alma = 1; - -#ifdef DEBUG - console_printk[0] = 8; -#endif -} |