aboutsummaryrefslogtreecommitdiff
path: root/arch/ppc64/kernel/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc64/kernel/head.S')
-rw-r--r--arch/ppc64/kernel/head.S2007
1 files changed, 0 insertions, 2007 deletions
diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S
deleted file mode 100644
index 1c869ea72d2..00000000000
--- a/arch/ppc64/kernel/head.S
+++ /dev/null
@@ -1,2007 +0,0 @@
-/*
- * arch/ppc64/kernel/head.S
- *
- * PowerPC version
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
- * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
- * Adapted for Power Macintosh by Paul Mackerras.
- * Low-level exception handlers and MMU support
- * rewritten by Paul Mackerras.
- * Copyright (C) 1996 Paul Mackerras.
- *
- * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
- * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
- *
- * This file contains the low-level support and setup for the
- * PowerPC-64 platform, including trap and interrupt dispatch.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/config.h>
-#include <linux/threads.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/bug.h>
-#include <asm/cputable.h>
-#include <asm/setup.h>
-#include <asm/hvcall.h>
-#include <asm/iseries/lpar_map.h>
-#include <asm/thread_info.h>
-
-#ifdef CONFIG_PPC_ISERIES
-#define DO_SOFT_DISABLE
-#endif
-
-/*
- * We layout physical memory as follows:
- * 0x0000 - 0x00ff : Secondary processor spin code
- * 0x0100 - 0x2fff : pSeries Interrupt prologs
- * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs
- * 0x6000 - 0x6fff : Initial (CPU0) segment table
- * 0x7000 - 0x7fff : FWNMI data area
- * 0x8000 - : Early init and support code
- */
-
-/*
- * SPRG Usage
- *
- * Register Definition
- *
- * SPRG0 reserved for hypervisor
- * SPRG1 temp - used to save gpr
- * SPRG2 temp - used to save gpr
- * SPRG3 virt addr of paca
- */
-
-/*
- * Entering into this code we make the following assumptions:
- * For pSeries:
- * 1. The MMU is off & open firmware is running in real mode.
- * 2. The kernel is entered at __start
- *
- * For iSeries:
- * 1. The MMU is on (as it always is for iSeries)
- * 2. The kernel is entered at system_reset_iSeries
- */
-
- .text
- .globl _stext
-_stext:
-#ifdef CONFIG_PPC_MULTIPLATFORM
-_GLOBAL(__start)
- /* NOP this out unconditionally */
-BEGIN_FTR_SECTION
- b .__start_initialization_multiplatform
-END_FTR_SECTION(0, 1)
-#endif /* CONFIG_PPC_MULTIPLATFORM */
-
- /* Catch branch to 0 in real mode */
- trap
-
-#ifdef CONFIG_PPC_ISERIES
- /*
- * At offset 0x20, there is a pointer to iSeries LPAR data.
- * This is required by the hypervisor
- */
- . = 0x20
- .llong hvReleaseData-KERNELBASE
-
- /*
- * At offset 0x28 and 0x30 are offsets to the mschunks_map
- * array (used by the iSeries LPAR debugger to do translation
- * between physical addresses and absolute addresses) and
- * to the pidhash table (also used by the debugger)
- */
- .llong mschunks_map-KERNELBASE
- .llong 0 /* pidhash-KERNELBASE SFRXXX */
-
- /* Offset 0x38 - Pointer to start of embedded System.map */
- .globl embedded_sysmap_start
-embedded_sysmap_start:
- .llong 0
- /* Offset 0x40 - Pointer to end of embedded System.map */
- .globl embedded_sysmap_end
-embedded_sysmap_end:
- .llong 0
-
-#endif /* CONFIG_PPC_ISERIES */
-
- /* Secondary processors spin on this value until it goes to 1. */
- .globl __secondary_hold_spinloop
-__secondary_hold_spinloop:
- .llong 0x0
-
- /* Secondary processors write this value with their cpu # */
- /* after they enter the spin loop immediately below. */
- .globl __secondary_hold_acknowledge
-__secondary_hold_acknowledge:
- .llong 0x0
-
- . = 0x60
-/*
- * The following code is used on pSeries to hold secondary processors
- * in a spin loop after they have been freed from OpenFirmware, but
- * before the bulk of the kernel has been relocated. This code
- * is relocated to physical address 0x60 before prom_init is run.
- * All of it must fit below the first exception vector at 0x100.
- */
-_GLOBAL(__secondary_hold)
- mfmsr r24
- ori r24,r24,MSR_RI
- mtmsrd r24 /* RI on */
-
- /* Grab our linux cpu number */
- mr r24,r3
-
- /* Tell the master cpu we're here */
- /* Relocation is off & we are located at an address less */
- /* than 0x100, so only need to grab low order offset. */
- std r24,__secondary_hold_acknowledge@l(0)
- sync
-
- /* All secondary cpus wait here until told to start. */
-100: ld r4,__secondary_hold_spinloop@l(0)
- cmpdi 0,r4,1
- bne 100b
-
-#ifdef CONFIG_HMT
- b .hmt_init
-#else
-#ifdef CONFIG_SMP
- mr r3,r24
- b .pSeries_secondary_smp_init
-#else
- BUG_OPCODE
-#endif
-#endif
-
-/* This value is used to mark exception frames on the stack. */
- .section ".toc","aw"
-exception_marker:
- .tc ID_72656773_68657265[TC],0x7265677368657265
- .text
-
-/*
- * The following macros define the code that appears as
- * the prologue to each of the exception handlers. They
- * are split into two parts to allow a single kernel binary
- * to be used for pSeries and iSeries.
- * LOL. One day... - paulus
- */
-
-/*
- * We make as much of the exception code common between native
- * exception handlers (including pSeries LPAR) and iSeries LPAR
- * implementations as possible.
- */
-
-/*
- * This is the start of the interrupt handlers for pSeries
- * This code runs with relocation off.
- */
-#define EX_R9 0
-#define EX_R10 8
-#define EX_R11 16
-#define EX_R12 24
-#define EX_R13 32
-#define EX_SRR0 40
-#define EX_DAR 48
-#define EX_DSISR 56
-#define EX_CCR 60
-#define EX_R3 64
-#define EX_LR 72
-
-#define EXCEPTION_PROLOG_PSERIES(area, label) \
- mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \
- std r9,area+EX_R9(r13); /* save r9 - r12 */ \
- std r10,area+EX_R10(r13); \
- std r11,area+EX_R11(r13); \
- std r12,area+EX_R12(r13); \
- mfspr r9,SPRN_SPRG1; \
- std r9,area+EX_R13(r13); \
- mfcr r9; \
- clrrdi r12,r13,32; /* get high part of &label */ \
- mfmsr r10; \
- mfspr r11,SPRN_SRR0; /* save SRR0 */ \
- ori r12,r12,(label)@l; /* virt addr of handler */ \
- ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \
- mtspr SPRN_SRR0,r12; \
- mfspr r12,SPRN_SRR1; /* and SRR1 */ \
- mtspr SPRN_SRR1,r10; \
- rfid; \
- b . /* prevent speculative execution */
-
-/*
- * This is the start of the interrupt handlers for iSeries
- * This code runs with relocation on.
- */
-#define EXCEPTION_PROLOG_ISERIES_1(area) \
- mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \
- std r9,area+EX_R9(r13); /* save r9 - r12 */ \
- std r10,area+EX_R10(r13); \
- std r11,area+EX_R11(r13); \
- std r12,area+EX_R12(r13); \
- mfspr r9,SPRN_SPRG1; \
- std r9,area+EX_R13(r13); \
- mfcr r9
-
-#define EXCEPTION_PROLOG_ISERIES_2 \
- mfmsr r10; \
- ld r11,PACALPPACA+LPPACASRR0(r13); \
- ld r12,PACALPPACA+LPPACASRR1(r13); \
- ori r10,r10,MSR_RI; \
- mtmsrd r10,1
-
-/*
- * The common exception prolog is used for all except a few exceptions
- * such as a segment miss on a kernel address. We have to be prepared
- * to take another exception from the point where we first touch the
- * kernel stack onwards.
- *
- * On entry r13 points to the paca, r9-r13 are saved in the paca,
- * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
- * SRR1, and relocation is on.
- */
-#define EXCEPTION_PROLOG_COMMON(n, area) \
- andi. r10,r12,MSR_PR; /* See if coming from user */ \
- mr r10,r1; /* Save r1 */ \
- subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \
- beq- 1f; \
- ld r1,PACAKSAVE(r13); /* kernel stack to use */ \
-1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \
- bge- cr1,bad_stack; /* abort if it is */ \
- std r9,_CCR(r1); /* save CR in stackframe */ \
- std r11,_NIP(r1); /* save SRR0 in stackframe */ \
- std r12,_MSR(r1); /* save SRR1 in stackframe */ \
- std r10,0(r1); /* make stack chain pointer */ \
- std r0,GPR0(r1); /* save r0 in stackframe */ \
- std r10,GPR1(r1); /* save r1 in stackframe */ \
- std r2,GPR2(r1); /* save r2 in stackframe */ \
- SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
- SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
- ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \
- ld r10,area+EX_R10(r13); \
- std r9,GPR9(r1); \
- std r10,GPR10(r1); \
- ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \
- ld r10,area+EX_R12(r13); \
- ld r11,area+EX_R13(r13); \
- std r9,GPR11(r1); \
- std r10,GPR12(r1); \
- std r11,GPR13(r1); \
- ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \
- mflr r9; /* save LR in stackframe */ \
- std r9,_LINK(r1); \
- mfctr r10; /* save CTR in stackframe */ \
- std r10,_CTR(r1); \
- mfspr r11,SPRN_XER; /* save XER in stackframe */ \
- std r11,_XER(r1); \
- li r9,(n)+1; \
- std r9,_TRAP(r1); /* set trap number */ \
- li r10,0; \
- ld r11,exception_marker@toc(r2); \
- std r10,RESULT(r1); /* clear regs->result */ \
- std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */
-
-/*
- * Exception vectors.
- */
-#define STD_EXCEPTION_PSERIES(n, label) \
- . = n; \
- .globl label##_pSeries; \
-label##_pSeries: \
- HMT_MEDIUM; \
- mtspr SPRN_SPRG1,r13; /* save r13 */ \
- RUNLATCH_ON(r13); \
- EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
-
-#define STD_EXCEPTION_ISERIES(n, label, area) \
- .globl label##_iSeries; \
-label##_iSeries: \
- HMT_MEDIUM; \
- mtspr SPRN_SPRG1,r13; /* save r13 */ \
- RUNLATCH_ON(r13); \
- EXCEPTION_PROLOG_ISERIES_1(area); \
- EXCEPTION_PROLOG_ISERIES_2; \
- b label##_common
-
-#define MASKABLE_EXCEPTION_ISERIES(n, label) \
- .globl label##_iSeries; \
-label##_iSeries: \
- HMT_MEDIUM; \
- mtspr SPRN_SPRG1,r13; /* save r13 */ \
- RUNLATCH_ON(r13); \
- EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \
- lbz r10,PACAPROCENABLED(r13); \
- cmpwi 0,r10,0; \
- beq- label##_iSeries_masked; \
- EXCEPTION_PROLOG_ISERIES_2; \
- b label##_common; \
-
-#ifdef DO_SOFT_DISABLE
-#define DISABLE_INTS \
- lbz r10,PACAPROCENABLED(r13); \
- li r11,0; \
- std r10,SOFTE(r1); \
- mfmsr r10; \
- stb r11,PACAPROCENABLED(r13); \
- ori r10,r10,MSR_EE; \
- mtmsrd r10,1
-
-#define ENABLE_INTS \
- lbz r10,PACAPROCENABLED(r13); \
- mfmsr r11; \
- std r10,SOFTE(r1); \
- ori r11,r11,MSR_EE; \
- mtmsrd r11,1
-
-#else /* hard enable/disable interrupts */
-#define DISABLE_INTS
-
-#define ENABLE_INTS \
- ld r12,_MSR(r1); \
- mfmsr r11; \
- rlwimi r11,r12,0,MSR_EE; \
- mtmsrd r11,1
-
-#endif
-
-#define STD_EXCEPTION_COMMON(trap, label, hdlr) \
- .align 7; \
- .globl label##_common; \
-label##_common: \
- EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
- DISABLE_INTS; \
- bl .save_nvgprs; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- bl hdlr; \
- b .ret_from_except
-
-#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \
- .align 7; \
- .globl label##_common; \
-label##_common: \
- EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
- DISABLE_INTS; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- bl hdlr; \
- b .ret_from_except_lite
-
-/*
- * Start of pSeries system interrupt routines
- */
- . = 0x100
- .globl __start_interrupts
-__start_interrupts:
-
- STD_EXCEPTION_PSERIES(0x100, system_reset)
-
- . = 0x200
-_machine_check_pSeries:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
- RUNLATCH_ON(r13)
- EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
-
- . = 0x300
- .globl data_access_pSeries
-data_access_pSeries:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13
-BEGIN_FTR_SECTION
- mtspr SPRN_SPRG2,r12
- mfspr r13,SPRN_DAR
- mfspr r12,SPRN_DSISR
- srdi r13,r13,60
- rlwimi r13,r12,16,0x20
- mfcr r12
- cmpwi r13,0x2c
- beq .do_stab_bolted_pSeries
- mtcrf 0x80,r12
- mfspr r12,SPRN_SPRG2
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
- EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
-
- . = 0x380
- .globl data_access_slb_pSeries
-data_access_slb_pSeries:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13
- RUNLATCH_ON(r13)
- mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
- std r3,PACA_EXSLB+EX_R3(r13)
- mfspr r3,SPRN_DAR
- std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
- mfcr r9
-#ifdef __DISABLED__
- /* Keep that around for when we re-implement dynamic VSIDs */
- cmpdi r3,0
- bge slb_miss_user_pseries
-#endif /* __DISABLED__ */
- std r10,PACA_EXSLB+EX_R10(r13)
- std r11,PACA_EXSLB+EX_R11(r13)
- std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG1
- std r10,PACA_EXSLB+EX_R13(r13)
- mfspr r12,SPRN_SRR1 /* and SRR1 */
- b .slb_miss_realmode /* Rel. branch works in real mode */
-
- STD_EXCEPTION_PSERIES(0x400, instruction_access)
-
- . = 0x480
- .globl instruction_access_slb_pSeries
-instruction_access_slb_pSeries:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13
- RUNLATCH_ON(r13)
- mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
- std r3,PACA_EXSLB+EX_R3(r13)
- mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
- std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
- mfcr r9
-#ifdef __DISABLED__
- /* Keep that around for when we re-implement dynamic VSIDs */
- cmpdi r3,0
- bge slb_miss_user_pseries
-#endif /* __DISABLED__ */
- std r10,PACA_EXSLB+EX_R10(r13)
- std r11,PACA_EXSLB+EX_R11(r13)
- std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG1
- std r10,PACA_EXSLB+EX_R13(r13)
- mfspr r12,SPRN_SRR1 /* and SRR1 */
- b .slb_miss_realmode /* Rel. branch works in real mode */
-
- STD_EXCEPTION_PSERIES(0x500, hardware_interrupt)
- STD_EXCEPTION_PSERIES(0x600, alignment)
- STD_EXCEPTION_PSERIES(0x700, program_check)
- STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
- STD_EXCEPTION_PSERIES(0x900, decrementer)
- STD_EXCEPTION_PSERIES(0xa00, trap_0a)
- STD_EXCEPTION_PSERIES(0xb00, trap_0b)
-
- . = 0xc00
- .globl system_call_pSeries
-system_call_pSeries:
- HMT_MEDIUM
- RUNLATCH_ON(r9)
- mr r9,r13
- mfmsr r10
- mfspr r13,SPRN_SPRG3
- mfspr r11,SPRN_SRR0
- clrrdi r12,r13,32
- oris r12,r12,system_call_common@h
- ori r12,r12,system_call_common@l
- mtspr SPRN_SRR0,r12
- ori r10,r10,MSR_IR|MSR_DR|MSR_RI
- mfspr r12,SPRN_SRR1
- mtspr SPRN_SRR1,r10
- rfid
- b . /* prevent speculative execution */
-
- STD_EXCEPTION_PSERIES(0xd00, single_step)
- STD_EXCEPTION_PSERIES(0xe00, trap_0e)
-
- /* We need to deal with the Altivec unavailable exception
- * here which is at 0xf20, thus in the middle of the
- * prolog code of the PerformanceMonitor one. A little
- * trickery is thus necessary
- */
- . = 0xf00
- b performance_monitor_pSeries
-
- STD_EXCEPTION_PSERIES(0xf20, altivec_unavailable)
-
- STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
- STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
-
- . = 0x3000
-
-/*** pSeries interrupt support ***/
-
- /* moved from 0xf00 */
- STD_EXCEPTION_PSERIES(., performance_monitor)
-
- .align 7
-_GLOBAL(do_stab_bolted_pSeries)
- mtcrf 0x80,r12
- mfspr r12,SPRN_SPRG2
- EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
-
-/*
- * We have some room here we use that to put
- * the peries slb miss user trampoline code so it's reasonably
- * away from slb_miss_user_common to avoid problems with rfid
- *
- * This is used for when the SLB miss handler has to go virtual,
- * which doesn't happen for now anymore but will once we re-implement
- * dynamic VSIDs for shared page tables
- */
-#ifdef __DISABLED__
-slb_miss_user_pseries:
- std r10,PACA_EXGEN+EX_R10(r13)
- std r11,PACA_EXGEN+EX_R11(r13)
- std r12,PACA_EXGEN+EX_R12(r13)
- mfspr r10,SPRG1
- ld r11,PACA_EXSLB+EX_R9(r13)
- ld r12,PACA_EXSLB+EX_R3(r13)
- std r10,PACA_EXGEN+EX_R13(r13)
- std r11,PACA_EXGEN+EX_R9(r13)
- std r12,PACA_EXGEN+EX_R3(r13)
- clrrdi r12,r13,32
- mfmsr r10
- mfspr r11,SRR0 /* save SRR0 */
- ori r12,r12,slb_miss_user_common@l /* virt addr of handler */
- ori r10,r10,MSR_IR|MSR_DR|MSR_RI
- mtspr SRR0,r12
- mfspr r12,SRR1 /* and SRR1 */
- mtspr SRR1,r10
- rfid
- b . /* prevent spec. execution */
-#endif /* __DISABLED__ */
-
-/*
- * Vectors for the FWNMI option. Share common code.
- */
- .globl system_reset_fwnmi
-system_reset_fwnmi:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
- RUNLATCH_ON(r13)
- EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
-
- .globl machine_check_fwnmi
-machine_check_fwnmi:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
- RUNLATCH_ON(r13)
- EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
-
-#ifdef CONFIG_PPC_ISERIES
-/*** ISeries-LPAR interrupt handlers ***/
-
- STD_EXCEPTION_ISERIES(0x200, machine_check, PACA_EXMC)
-
- .globl data_access_iSeries
-data_access_iSeries:
- mtspr SPRN_SPRG1,r13
-BEGIN_FTR_SECTION
- mtspr SPRN_SPRG2,r12
- mfspr r13,SPRN_DAR
- mfspr r12,SPRN_DSISR
- srdi r13,r13,60
- rlwimi r13,r12,16,0x20
- mfcr r12
- cmpwi r13,0x2c
- beq .do_stab_bolted_iSeries
- mtcrf 0x80,r12
- mfspr r12,SPRN_SPRG2
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
- EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN)
- EXCEPTION_PROLOG_ISERIES_2
- b data_access_common
-
-.do_stab_bolted_iSeries:
- mtcrf 0x80,r12
- mfspr r12,SPRN_SPRG2
- EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB)
- EXCEPTION_PROLOG_ISERIES_2
- b .do_stab_bolted
-
- .globl data_access_slb_iSeries
-data_access_slb_iSeries:
- mtspr SPRN_SPRG1,r13 /* save r13 */
- mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
- std r3,PACA_EXSLB+EX_R3(r13)
- mfspr r3,SPRN_DAR
- std r9,PACA_EXSLB+EX_R9(r13)
- mfcr r9
-#ifdef __DISABLED__
- cmpdi r3,0
- bge slb_miss_user_iseries
-#endif
- std r10,PACA_EXSLB+EX_R10(r13)
- std r11,PACA_EXSLB+EX_R11(r13)
- std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG1
- std r10,PACA_EXSLB+EX_R13(r13)
- ld r12,PACALPPACA+LPPACASRR1(r13);
- b .slb_miss_realmode
-
- STD_EXCEPTION_ISERIES(0x400, instruction_access, PACA_EXGEN)
-
- .globl instruction_access_slb_iSeries
-instruction_access_slb_iSeries:
- mtspr SPRN_SPRG1,r13 /* save r13 */
- mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
- std r3,PACA_EXSLB+EX_R3(r13)
- ld r3,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */
- std r9,PACA_EXSLB+EX_R9(r13)
- mfcr r9
-#ifdef __DISABLED__
- cmpdi r3,0
- bge .slb_miss_user_iseries
-#endif
- std r10,PACA_EXSLB+EX_R10(r13)
- std r11,PACA_EXSLB+EX_R11(r13)
- std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG1
- std r10,PACA_EXSLB+EX_R13(r13)
- ld r12,PACALPPACA+LPPACASRR1(r13);
- b .slb_miss_realmode
-
-#ifdef __DISABLED__
-slb_miss_user_iseries:
- std r10,PACA_EXGEN+EX_R10(r13)
- std r11,PACA_EXGEN+EX_R11(r13)
- std r12,PACA_EXGEN+EX_R12(r13)
- mfspr r10,SPRG1
- ld r11,PACA_EXSLB+EX_R9(r13)
- ld r12,PACA_EXSLB+EX_R3(r13)
- std r10,PACA_EXGEN+EX_R13(r13)
- std r11,PACA_EXGEN+EX_R9(r13)
- std r12,PACA_EXGEN+EX_R3(r13)
- EXCEPTION_PROLOG_ISERIES_2
- b slb_miss_user_common
-#endif
-
- MASKABLE_EXCEPTION_ISERIES(0x500, hardware_interrupt)
- STD_EXCEPTION_ISERIES(0x600, alignment, PACA_EXGEN)
- STD_EXCEPTION_ISERIES(0x700, program_check, PACA_EXGEN)
- STD_EXCEPTION_ISERIES(0x800, fp_unavailable, PACA_EXGEN)
- MASKABLE_EXCEPTION_ISERIES(0x900, decrementer)
- STD_EXCEPTION_ISERIES(0xa00, trap_0a, PACA_EXGEN)
- STD_EXCEPTION_ISERIES(0xb00, trap_0b, PACA_EXGEN)
-
- .globl system_call_iSeries
-system_call_iSeries:
- mr r9,r13
- mfspr r13,SPRN_SPRG3
- EXCEPTION_PROLOG_ISERIES_2
- b system_call_common
-
- STD_EXCEPTION_ISERIES( 0xd00, single_step, PACA_EXGEN)
- STD_EXCEPTION_ISERIES( 0xe00, trap_0e, PACA_EXGEN)
- STD_EXCEPTION_ISERIES( 0xf00, performance_monitor, PACA_EXGEN)
-
- .globl system_reset_iSeries
-system_reset_iSeries:
- mfspr r13,SPRN_SPRG3 /* Get paca address */
- mfmsr r24
- ori r24,r24,MSR_RI
- mtmsrd r24 /* RI on */
- lhz r24,PACAPACAINDEX(r13) /* Get processor # */
- cmpwi 0,r24,0 /* Are we processor 0? */
- beq .__start_initialization_iSeries /* Start up the first processor */
- mfspr r4,SPRN_CTRLF
- li r5,CTRL_RUNLATCH /* Turn off the run light */
- andc r4,r4,r5
- mtspr SPRN_CTRLT,r4
-
-1:
- HMT_LOW
-#ifdef CONFIG_SMP
- lbz r23,PACAPROCSTART(r13) /* Test if this processor
- * should start */
- sync
- LOADADDR(r3,current_set)
- sldi r28,r24,3 /* get current_set[cpu#] */
- ldx r3,r3,r28
- addi r1,r3,THREAD_SIZE
- subi r1,r1,STACK_FRAME_OVERHEAD
-
- cmpwi 0,r23,0
- beq iSeries_secondary_smp_loop /* Loop until told to go */
- bne .__secondary_start /* Loop until told to go */
-iSeries_secondary_smp_loop:
- /* Let the Hypervisor know we are alive */
- /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
- lis r3,0x8002
- rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */
-#else /* CONFIG_SMP */
- /* Yield the processor. This is required for non-SMP kernels
- which are running on multi-threaded machines. */
- lis r3,0x8000
- rldicr r3,r3,32,15 /* r3 = (r3 << 32) & 0xffff000000000000 */
- addi r3,r3,18 /* r3 = 0x8000000000000012 which is "yield" */
- li r4,0 /* "yield timed" */
- li r5,-1 /* "yield forever" */
-#endif /* CONFIG_SMP */
- li r0,-1 /* r0=-1 indicates a Hypervisor call */
- sc /* Invoke the hypervisor via a system call */
- mfspr r13,SPRN_SPRG3 /* Put r13 back ???? */
- b 1b /* If SMP not configured, secondaries
- * loop forever */
-
- .globl decrementer_iSeries_masked
-decrementer_iSeries_masked:
- li r11,1
- stb r11,PACALPPACA+LPPACADECRINT(r13)
- lwz r12,PACADEFAULTDECR(r13)
- mtspr SPRN_DEC,r12
- /* fall through */
-
- .globl hardware_interrupt_iSeries_masked
-hardware_interrupt_iSeries_masked:
- mtcrf 0x80,r9 /* Restore regs */
- ld r11,PACALPPACA+LPPACASRR0(r13)
- ld r12,PACALPPACA+LPPACASRR1(r13)
- mtspr SPRN_SRR0,r11
- mtspr SPRN_SRR1,r12
- ld r9,PACA_EXGEN+EX_R9(r13)
- ld r10,PACA_EXGEN+EX_R10(r13)
- ld r11,PACA_EXGEN+EX_R11(r13)
- ld r12,PACA_EXGEN+EX_R12(r13)
- ld r13,PACA_EXGEN+EX_R13(r13)
- rfid
- b . /* prevent speculative execution */
-#endif /* CONFIG_PPC_ISERIES */
-
-/*** Common interrupt handlers ***/
-
- STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
-
- /*
- * Machine check is different because we use a different
- * save area: PACA_EXMC instead of PACA_EXGEN.
- */
- .align 7
- .globl machine_check_common
-machine_check_common:
- EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
- DISABLE_INTS
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .machine_check_exception
- b .ret_from_except
-
- STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt)
- STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
- STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
- STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
- STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
- STD_EXCEPTION_COMMON(0xf00, performance_monitor, .performance_monitor_exception)
- STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
-#ifdef CONFIG_ALTIVEC
- STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
-#else
- STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
-#endif
-
-/*
- * Here we have detected that the kernel stack pointer is bad.
- * R9 contains the saved CR, r13 points to the paca,
- * r10 contains the (bad) kernel stack pointer,
- * r11 and r12 contain the saved SRR0 and SRR1.
- * We switch to using an emergency stack, save the registers there,
- * and call kernel_bad_stack(), which panics.
- */
-bad_stack:
- ld r1,PACAEMERGSP(r13)
- subi r1,r1,64+INT_FRAME_SIZE
- std r9,_CCR(r1)
- std r10,GPR1(r1)
- std r11,_NIP(r1)
- std r12,_MSR(r1)
- mfspr r11,SPRN_DAR
- mfspr r12,SPRN_DSISR
- std r11,_DAR(r1)
- std r12,_DSISR(r1)
- mflr r10
- mfctr r11
- mfxer r12
- std r10,_LINK(r1)
- std r11,_CTR(r1)
- std r12,_XER(r1)
- SAVE_GPR(0,r1)
- SAVE_GPR(2,r1)
- SAVE_4GPRS(3,r1)
- SAVE_2GPRS(7,r1)
- SAVE_10GPRS(12,r1)
- SAVE_10GPRS(22,r1)
- addi r11,r1,INT_FRAME_SIZE
- std r11,0(r1)
- li r12,0
- std r12,0(r11)
- ld r2,PACATOC(r13)
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .kernel_bad_stack
- b 1b
-
-/*
- * Return from an exception with minimal checks.
- * The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
- * If interrupts have been enabled, or anything has been
- * done that might have changed the scheduling status of
- * any task or sent any task a signal, you should use
- * ret_from_except or ret_from_except_lite instead of this.
- */
- .globl fast_exception_return
-fast_exception_return:
- ld r12,_MSR(r1)
- ld r11,_NIP(r1)
- andi. r3,r12,MSR_RI /* check if RI is set */
- beq- unrecov_fer
- ld r3,_CCR(r1)
- ld r4,_LINK(r1)
- ld r5,_CTR(r1)
- ld r6,_XER(r1)
- mtcr r3
- mtlr r4
- mtctr r5
- mtxer r6
- REST_GPR(0, r1)
- REST_8GPRS(2, r1)
-
- mfmsr r10
- clrrdi r10,r10,2 /* clear RI (LE is 0 already) */
- mtmsrd r10,1
-
- mtspr SPRN_SRR1,r12
- mtspr SPRN_SRR0,r11
- REST_4GPRS(10, r1)
- ld r1,GPR1(r1)
- rfid
- b . /* prevent speculative execution */
-
-unrecov_fer:
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
-/*
- * Here r13 points to the paca, r9 contains the saved CR,
- * SRR0 and SRR1 are saved in r11 and r12,
- * r9 - r13 are saved in paca->exgen.
- */
- .align 7
- .globl data_access_common
-data_access_common:
- RUNLATCH_ON(r10) /* It wont fit in the 0x300 handler */
- mfspr r10,SPRN_DAR
- std r10,PACA_EXGEN+EX_DAR(r13)
- mfspr r10,SPRN_DSISR
- stw r10,PACA_EXGEN+EX_DSISR(r13)
- EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
- ld r3,PACA_EXGEN+EX_DAR(r13)
- lwz r4,PACA_EXGEN+EX_DSISR(r13)
- li r5,0x300
- b .do_hash_page /* Try to handle as hpte fault */
-
- .align 7
- .globl instruction_access_common
-instruction_access_common:
- EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
- ld r3,_NIP(r1)
- andis. r4,r12,0x5820
- li r5,0x400
- b .do_hash_page /* Try to handle as hpte fault */
-
-/*
- * Here is the common SLB miss user that is used when going to virtual
- * mode for SLB misses, that is currently not used
- */
-#ifdef __DISABLED__
- .align 7
- .globl slb_miss_user_common
-slb_miss_user_common:
- mflr r10
- std r3,PACA_EXGEN+EX_DAR(r13)
- stw r9,PACA_EXGEN+EX_CCR(r13)
- std r10,PACA_EXGEN+EX_LR(r13)
- std r11,PACA_EXGEN+EX_SRR0(r13)
- bl .slb_allocate_user
-
- ld r10,PACA_EXGEN+EX_LR(r13)
- ld r3,PACA_EXGEN+EX_R3(r13)
- lwz r9,PACA_EXGEN+EX_CCR(r13)
- ld r11,PACA_EXGEN+EX_SRR0(r13)
- mtlr r10
- beq- slb_miss_fault
-
- andi. r10,r12,MSR_RI /* check for unrecoverable exception */
- beq- unrecov_user_slb
- mfmsr r10
-
-.machine push
-.machine "power4"
- mtcrf 0x80,r9
-.machine pop
-
- clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */
- mtmsrd r10,1
-
- mtspr SRR0,r11
- mtspr SRR1,r12
-
- ld r9,PACA_EXGEN+EX_R9(r13)
- ld r10,PACA_EXGEN+EX_R10(r13)
- ld r11,PACA_EXGEN+EX_R11(r13)
- ld r12,PACA_EXGEN+EX_R12(r13)
- ld r13,PACA_EXGEN+EX_R13(r13)
- rfid
- b .
-
-slb_miss_fault:
- EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
- ld r4,PACA_EXGEN+EX_DAR(r13)
- li r5,0
- std r4,_DAR(r1)
- std r5,_DSISR(r1)
- b .handle_page_fault
-
-unrecov_user_slb:
- EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
- DISABLE_INTS
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
-#endif /* __DISABLED__ */
-
-
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r12 contain the saved SRR1, SRR0 is still ready for return
- * r3 has the faulting address
- * r9 - r13 are saved in paca->exslb.
- * r3 is saved in paca->slb_r3
- * We assume we aren't going to take any exceptions during this procedure.
- */
-_GLOBAL(slb_miss_realmode)
- mflr r10
-
- stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
- std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
-
- bl .slb_allocate_realmode
-
- /* All done -- return from exception. */
-
- ld r10,PACA_EXSLB+EX_LR(r13)
- ld r3,PACA_EXSLB+EX_R3(r13)
- lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
-#ifdef CONFIG_PPC_ISERIES
- ld r11,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */
-#endif /* CONFIG_PPC_ISERIES */
-
- mtlr r10
-
- andi. r10,r12,MSR_RI /* check for unrecoverable exception */
- beq- unrecov_slb
-
-.machine push
-.machine "power4"
- mtcrf 0x80,r9
- mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
-.machine pop
-
-#ifdef CONFIG_PPC_ISERIES
- mtspr SPRN_SRR0,r11
- mtspr SPRN_SRR1,r12
-#endif /* CONFIG_PPC_ISERIES */
- ld r9,PACA_EXSLB+EX_R9(r13)
- ld r10,PACA_EXSLB+EX_R10(r13)
- ld r11,PACA_EXSLB+EX_R11(r13)
- ld r12,PACA_EXSLB+EX_R12(r13)
- ld r13,PACA_EXSLB+EX_R13(r13)
- rfid
- b . /* prevent speculative execution */
-
-unrecov_slb:
- EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
- DISABLE_INTS
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
- .align 7
- .globl hardware_interrupt_common
- .globl hardware_interrupt_entry
-hardware_interrupt_common:
- EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
-hardware_interrupt_entry:
- DISABLE_INTS
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_IRQ
- b .ret_from_except_lite
-
- .align 7
- .globl alignment_common
-alignment_common:
- mfspr r10,SPRN_DAR
- std r10,PACA_EXGEN+EX_DAR(r13)
- mfspr r10,SPRN_DSISR
- stw r10,PACA_EXGEN+EX_DSISR(r13)
- EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
- ld r3,PACA_EXGEN+EX_DAR(r13)
- lwz r4,PACA_EXGEN+EX_DSISR(r13)
- std r3,_DAR(r1)
- std r4,_DSISR(r1)
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
- bl .alignment_exception
- b .ret_from_except
-
- .align 7
- .globl program_check_common
-program_check_common:
- EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
- bl .program_check_exception
- b .ret_from_except
-
- .align 7
- .globl fp_unavailable_common
-fp_unavailable_common:
- EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
- bne .load_up_fpu /* if from user, just load it up */
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
- bl .kernel_fp_unavailable_exception
- BUG_OPCODE
-
- .align 7
- .globl altivec_unavailable_common
-altivec_unavailable_common:
- EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
-#ifdef CONFIG_ALTIVEC
-BEGIN_FTR_SECTION
- bne .load_up_altivec /* if from user, just load it up */
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
- bl .altivec_unavailable_exception
- b .ret_from_except
-
-#ifdef CONFIG_ALTIVEC
-/*
- * load_up_altivec(unused, unused, tsk)
- * Disable VMX for the task which had it previously,
- * and save its vector registers in its thread_struct.
- * Enables the VMX for use in the kernel on return.
- * On SMP we know the VMX is free, since we give it up every
- * switch (ie, no lazy save of the vector registers).
- * On entry: r13 == 'current' && last_task_used_altivec != 'current'
- */
-_STATIC(load_up_altivec)
- mfmsr r5 /* grab the current MSR */
- oris r5,r5,MSR_VEC@h
- mtmsrd r5 /* enable use of VMX now */
- isync
-
-/*
- * For SMP, we don't do lazy VMX switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another. Instead we call giveup_altvec in switch_to.
- * VRSAVE isn't dealt with here, that is done in the normal context
- * switch code. Note that we could rely on vrsave value to eventually
- * avoid saving all of the VREGs here...
- */
-#ifndef CONFIG_SMP
- ld r3,last_task_used_altivec@got(r2)
- ld r4,0(r3)
- cmpdi 0,r4,0
- beq 1f
- /* Save VMX state to last_task_used_altivec's THREAD struct */
- addi r4,r4,THREAD
- SAVE_32VRS(0,r5,r4)
- mfvscr vr0
- li r10,THREAD_VSCR
- stvx vr0,r10,r4
- /* Disable VMX for last_task_used_altivec */
- ld r5,PT_REGS(r4)
- ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- lis r6,MSR_VEC@h
- andc r4,r4,r6
- std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
- /* Hack: if we get an altivec unavailable trap with VRSAVE
- * set to all zeros, we assume this is a broken application
- * that fails to set it properly, and thus we switch it to
- * all 1's
- */
- mfspr r4,SPRN_VRSAVE
- cmpdi 0,r4,0
- bne+ 1f
- li r4,-1
- mtspr SPRN_VRSAVE,r4
-1:
- /* enable use of VMX after return */
- ld r4,PACACURRENT(r13)
- addi r5,r4,THREAD /* Get THREAD */
- oris r12,r12,MSR_VEC@h
- std r12,_MSR(r1)
- li r4,1
- li r10,THREAD_VSCR
- stw r4,THREAD_USED_VR(r5)
- lvx vr0,r10,r5
- mtvscr vr0
- REST_32VRS(0,r4,r5)
-#ifndef CONFIG_SMP
- /* Update last_task_used_math to 'current' */
- subi r4,r5,THREAD /* Back to 'current' */
- std r4,0(r3)
-#endif /* CONFIG_SMP */
- /* restore registers and return */
- b fast_exception_return
-#endif /* CONFIG_ALTIVEC */
-
-/*
- * Hash table stuff
- */
- .align 7
-_GLOBAL(do_hash_page)
- std r3,_DAR(r1)
- std r4,_DSISR(r1)
-
- andis. r0,r4,0xa450 /* weird error? */
- bne- .handle_page_fault /* if not, try to insert a HPTE */
-BEGIN_FTR_SECTION
- andis. r0,r4,0x0020 /* Is it a segment table fault? */
- bne- .do_ste_alloc /* If so handle it */
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
-
- /*
- * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
- * accessing a userspace segment (even from the kernel). We assume
- * kernel addresses always have the high bit set.
- */
- rlwinm r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */
- rotldi r0,r3,15 /* Move high bit into MSR_PR posn */
- orc r0,r12,r0 /* MSR_PR | ~high_bit */
- rlwimi r4,r0,32-13,30,30 /* becomes _PAGE_USER access bit */
- ori r4,r4,1 /* add _PAGE_PRESENT */
- rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */
-
- /*
- * On iSeries, we soft-disable interrupts here, then
- * hard-enable interrupts so that the hash_page code can spin on
- * the hash_table_lock without problems on a shared processor.
- */
- DISABLE_INTS
-
- /*
- * r3 contains the faulting address
- * r4 contains the required access permissions
- * r5 contains the trap number
- *
- * at return r3 = 0 for success
- */
- bl .hash_page /* build HPTE if possible */
- cmpdi r3,0 /* see if hash_page succeeded */
-
-#ifdef DO_SOFT_DISABLE
- /*
- * If we had interrupts soft-enabled at the point where the
- * DSI/ISI occurred, and an interrupt came in during hash_page,
- * handle it now.
- * We jump to ret_from_except_lite rather than fast_exception_return
- * because ret_from_except_lite will check for and handle pending
- * interrupts if necessary.
- */
- beq .ret_from_except_lite
- /* For a hash failure, we don't bother re-enabling interrupts */
- ble- 12f
-
- /*
- * hash_page couldn't handle it, set soft interrupt enable back
- * to what it was before the trap. Note that .local_irq_restore
- * handles any interrupts pending at this point.
- */
- ld r3,SOFTE(r1)
- bl .local_irq_restore
- b 11f
-#else
- beq fast_exception_return /* Return from exception on success */
- ble- 12f /* Failure return from hash_page */
-
- /* fall through */
-#endif
-
-/* Here we have a page fault that hash_page can't handle. */
-_GLOBAL(handle_page_fault)
- ENABLE_INTS
-11: ld r4,_DAR(r1)
- ld r5,_DSISR(r1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_page_fault
- cmpdi r3,0
- beq+ .ret_from_except_lite
- bl .save_nvgprs
- mr r5,r3
- addi r3,r1,STACK_FRAME_OVERHEAD
- lwz r4,_DAR(r1)
- bl .bad_page_fault
- b .ret_from_except
-
-/* We have a page fault that hash_page could handle but HV refused
- * the PTE insertion
- */
-12: bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- lwz r4,_DAR(r1)
- bl .low_hash_fault
- b .ret_from_except
-
- /* here we have a segment miss */
-_GLOBAL(do_ste_alloc)
- bl .ste_allocate /* try to insert stab entry */
- cmpdi r3,0
- beq+ fast_exception_return
- b .handle_page_fault
-
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r11 and r12 contain the saved SRR0 and SRR1.
- * r9 - r13 are saved in paca->exslb.
- * We assume we aren't going to take any exceptions during this procedure.
- * We assume (DAR >> 60) == 0xc.
- */
- .align 7
-_GLOBAL(do_stab_bolted)
- stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
- std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */
-
- /* Hash to the primary group */
- ld r10,PACASTABVIRT(r13)
- mfspr r11,SPRN_DAR
- srdi r11,r11,28
- rldimi r10,r11,7,52 /* r10 = first ste of the group */
-
- /* Calculate VSID */
- /* This is a kernel address, so protovsid = ESID */
- ASM_VSID_SCRAMBLE(r11, r9)
- rldic r9,r11,12,16 /* r9 = vsid << 12 */
-
- /* Search the primary group for a free entry */
-1: ld r11,0(r10) /* Test valid bit of the current ste */
- andi. r11,r11,0x80
- beq 2f
- addi r10,r10,16
- andi. r11,r10,0x70
- bne 1b
-
- /* Stick for only searching the primary group for now. */
- /* At least for now, we use a very simple random castout scheme */
- /* Use the TB as a random number ; OR in 1 to avoid entry 0 */
- mftb r11
- rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */
- ori r11,r11,0x10
-
- /* r10 currently points to an ste one past the group of interest */
- /* make it point to the randomly selected entry */
- subi r10,r10,128
- or r10,r10,r11 /* r10 is the entry to invalidate */
-
- isync /* mark the entry invalid */
- ld r11,0(r10)
- rldicl r11,r11,56,1 /* clear the valid bit */
- rotldi r11,r11,8
- std r11,0(r10)
- sync
-
- clrrdi r11,r11,28 /* Get the esid part of the ste */
- slbie r11
-
-2: std r9,8(r10) /* Store the vsid part of the ste */
- eieio
-
- mfspr r11,SPRN_DAR /* Get the new esid */
- clrrdi r11,r11,28 /* Permits a full 32b of ESID */
- ori r11,r11,0x90 /* Turn on valid and kp */
- std r11,0(r10) /* Put new entry back into the stab */
-
- sync
-
- /* All done -- return from exception. */
- lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
- ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */
-
- andi. r10,r12,MSR_RI
- beq- unrecov_slb
-
- mtcrf 0x80,r9 /* restore CR */
-
- mfmsr r10
- clrrdi r10,r10,2
- mtmsrd r10,1
-
- mtspr SPRN_SRR0,r11
- mtspr SPRN_SRR1,r12
- ld r9,PACA_EXSLB+EX_R9(r13)
- ld r10,PACA_EXSLB+EX_R10(r13)
- ld r11,PACA_EXSLB+EX_R11(r13)
- ld r12,PACA_EXSLB+EX_R12(r13)
- ld r13,PACA_EXSLB+EX_R13(r13)
- rfid
- b . /* prevent speculative execution */
-
-/*
- * Space for CPU0's segment table.
- *
- * On iSeries, the hypervisor must fill in at least one entry before
- * we get control (with relocate on). The address is give to the hv
- * as a page number (see xLparMap in lpardata.c), so this must be at a
- * fixed address (the linker can't compute (u64)&initial_stab >>
- * PAGE_SHIFT).
- */
- . = STAB0_PHYS_ADDR /* 0x6000 */
- .globl initial_stab
-initial_stab:
- .space 4096
-
-/*
- * Data area reserved for FWNMI option.
- * This address (0x7000) is fixed by the RPA.
- */
- .= 0x7000
- .globl fwnmi_data_area
-fwnmi_data_area:
-
- /* iSeries does not use the FWNMI stuff, so it is safe to put
- * this here, even if we later allow kernels that will boot on
- * both pSeries and iSeries */
-#ifdef CONFIG_PPC_ISERIES
- . = LPARMAP_PHYS
-#include "lparmap.s"
-/*
- * This ".text" is here for old compilers that generate a trailing
- * .note section when compiling .c files to .s
- */
- .text
-#endif /* CONFIG_PPC_ISERIES */
-
- . = 0x8000
-
-/*
- * On pSeries, secondary processors spin in the following code.
- * At entry, r3 = this processor's number (physical cpu id)
- */
-_GLOBAL(pSeries_secondary_smp_init)
- mr r24,r3
-
- /* turn on 64-bit mode */
- bl .enable_64b_mode
- isync
-
- /* Copy some CPU settings from CPU 0 */
- bl .__restore_cpu_setup
-
- /* Set up a paca value for this processor. Since we have the
- * physical cpu id in r24, we need to search the pacas to find
- * which logical id maps to our physical one.
- */
- LOADADDR(r13, paca) /* Get base vaddr of paca array */
- li r5,0 /* logical cpu id */
-1: lhz r6,PACAHWCPUID(r13) /* Load HW procid from paca */
- cmpw r6,r24 /* Compare to our id */
- beq 2f
- addi r13,r13,PACA_SIZE /* Loop to next PACA on miss */
- addi r5,r5,1
- cmpwi r5,NR_CPUS
- blt 1b
-
- mr r3,r24 /* not found, copy phys to r3 */
- b .kexec_wait /* next kernel might do better */
-
-2: mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */
- /* From now on, r24 is expected to be logical cpuid */
- mr r24,r5
-3: HMT_LOW
- lbz r23,PACAPROCSTART(r13) /* Test if this processor should */
- /* start. */
- sync
-
- /* Create a temp kernel stack for use before relocation is on. */
- ld r1,PACAEMERGSP(r13)
- subi r1,r1,STACK_FRAME_OVERHEAD
-
- cmpwi 0,r23,0
-#ifdef CONFIG_SMP
- bne .__secondary_start
-#endif
- b 3b /* Loop until told to go */
-
-#ifdef CONFIG_PPC_ISERIES
-_STATIC(__start_initialization_iSeries)
- /* Clear out the BSS */
- LOADADDR(r11,__bss_stop)
- LOADADDR(r8,__bss_start)
- sub r11,r11,r8 /* bss size */
- addi r11,r11,7 /* round up to an even double word */
- rldicl. r11,r11,61,3 /* shift right by 3 */
- beq 4f
- addi r8,r8,-8
- li r0,0
- mtctr r11 /* zero this many doublewords */
-3: stdu r0,8(r8)
- bdnz 3b
-4:
- LOADADDR(r1,init_thread_union)
- addi r1,r1,THREAD_SIZE
- li r0,0
- stdu r0,-STACK_FRAME_OVERHEAD(r1)
-
- LOADADDR(r3,cpu_specs)
- LOADADDR(r4,cur_cpu_spec)
- li r5,0
- bl .identify_cpu
-
- LOADADDR(r2,__toc_start)
- addi r2,r2,0x4000
- addi r2,r2,0x4000
-
- bl .iSeries_early_setup
- bl .early_setup
-
- /* relocation is on at this point */
-
- b .start_here_common
-#endif /* CONFIG_PPC_ISERIES */
-
-#ifdef CONFIG_PPC_MULTIPLATFORM
-
-_STATIC(__mmu_off)
- mfmsr r3
- andi. r0,r3,MSR_IR|MSR_DR
- beqlr
- andc r3,r3,r0
- mtspr SPRN_SRR0,r4
- mtspr SPRN_SRR1,r3
- sync
- rfid
- b . /* prevent speculative execution */
-
-
-/*
- * Here is our main kernel entry point. We support currently 2 kind of entries
- * depending on the value of r5.
- *
- * r5 != NULL -> OF entry, we go to prom_init, "legacy" parameter content
- * in r3...r7
- *
- * r5 == NULL -> kexec style entry. r3 is a physical pointer to the
- * DT block, r4 is a physical pointer to the kernel itself
- *
- */
-_GLOBAL(__start_initialization_multiplatform)
- /*
- * Are we booted from a PROM Of-type client-interface ?
- */
- cmpldi cr0,r5,0
- bne .__boot_from_prom /* yes -> prom */
-
- /* Save parameters */
- mr r31,r3
- mr r30,r4
-
- /* Make sure we are running in 64 bits mode */
- bl .enable_64b_mode
-
- /* Setup some critical 970 SPRs before switching MMU off */
- bl .__970_cpu_preinit
-
- /* cpu # */
- li r24,0
-
- /* Switch off MMU if not already */
- LOADADDR(r4, .__after_prom_start - KERNELBASE)
- add r4,r4,r30
- bl .__mmu_off
- b .__after_prom_start
-
-_STATIC(__boot_from_prom)
- /* Save parameters */
- mr r31,r3
- mr r30,r4
- mr r29,r5
- mr r28,r6
- mr r27,r7
-
- /* Make sure we are running in 64 bits mode */
- bl .enable_64b_mode
-
- /* put a relocation offset into r3 */
- bl .reloc_offset
-
- LOADADDR(r2,__toc_start)
- addi r2,r2,0x4000
- addi r2,r2,0x4000
-
- /* Relocate the TOC from a virt addr to a real addr */
- sub r2,r2,r3
-
- /* Restore parameters */
- mr r3,r31
- mr r4,r30
- mr r5,r29
- mr r6,r28
- mr r7,r27
-
- /* Do all of the interaction with OF client interface */
- bl .prom_init
- /* We never return */
- trap
-
-/*
- * At this point, r3 contains the physical address we are running at,
- * returned by prom_init()
- */
-_STATIC(__after_prom_start)
-
-/*
- * We need to run with __start at physical address 0.
- * This will leave some code in the first 256B of
- * real memory, which are reserved for software use.
- * The remainder of the first page is loaded with the fixed
- * interrupt vectors. The next two pages are filled with
- * unknown exception placeholders.
- *
- * Note: This process overwrites the OF exception vectors.
- * r26 == relocation offset
- * r27 == KERNELBASE
- */
- bl .reloc_offset
- mr r26,r3
- SET_REG_TO_CONST(r27,KERNELBASE)
-
- li r3,0 /* target addr */
-
- // XXX FIXME: Use phys returned by OF (r30)
- sub r4,r27,r26 /* source addr */
- /* current address of _start */
- /* i.e. where we are running */
- /* the source addr */
-
- LOADADDR(r5,copy_to_here) /* # bytes of memory to copy */
- sub r5,r5,r27
-
- li r6,0x100 /* Start offset, the first 0x100 */
- /* bytes were copied earlier. */
-
- bl .copy_and_flush /* copy the first n bytes */
- /* this includes the code being */
- /* executed here. */
-
- LOADADDR(r0, 4f) /* Jump to the copy of this code */
- mtctr r0 /* that we just made/relocated */
- bctr
-
-4: LOADADDR(r5,klimit)
- sub r5,r5,r26
- ld r5,0(r5) /* get the value of klimit */
- sub r5,r5,r27
- bl .copy_and_flush /* copy the rest */
- b .start_here_multiplatform
-
-#endif /* CONFIG_PPC_MULTIPLATFORM */
-
-/*
- * Copy routine used to copy the kernel to start at physical address 0
- * and flush and invalidate the caches as needed.
- * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
- * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
- *
- * Note: this routine *only* clobbers r0, r6 and lr
- */
-_GLOBAL(copy_and_flush)
- addi r5,r5,-8
- addi r6,r6,-8
-4: li r0,16 /* Use the least common */
- /* denominator cache line */
- /* size. This results in */
- /* extra cache line flushes */
- /* but operation is correct. */
- /* Can't get cache line size */
- /* from NACA as it is being */
- /* moved too. */
-
- mtctr r0 /* put # words/line in ctr */
-3: addi r6,r6,8 /* copy a cache line */
- ldx r0,r6,r4
- stdx r0,r6,r3
- bdnz 3b
- dcbst r6,r3 /* write it to memory */
- sync
- icbi r6,r3 /* flush the icache line */
- cmpld 0,r6,r5
- blt 4b
- sync
- addi r5,r5,8
- addi r6,r6,8
- blr
-
-.align 8
-copy_to_here:
-
-#ifdef CONFIG_SMP
-#ifdef CONFIG_PPC_PMAC
-/*
- * On PowerMac, secondary processors starts from the reset vector, which
- * is temporarily turned into a call to one of the functions below.
- */
- .section ".text";
- .align 2 ;
-
- .globl __secondary_start_pmac_0
-__secondary_start_pmac_0:
- /* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
- li r24,0
- b 1f
- li r24,1
- b 1f
- li r24,2
- b 1f
- li r24,3
-1:
-
-_GLOBAL(pmac_secondary_start)
- /* turn on 64-bit mode */
- bl .enable_64b_mode
- isync
-
- /* Copy some CPU settings from CPU 0 */
- bl .__restore_cpu_setup
-
- /* pSeries do that early though I don't think we really need it */
- mfmsr r3
- ori r3,r3,MSR_RI
- mtmsrd r3 /* RI on */
-
- /* Set up a paca value for this processor. */
- LOADADDR(r4, paca) /* Get base vaddr of paca array */
- mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */
- add r13,r13,r4 /* for this processor. */
- mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */
-
- /* Create a temp kernel stack for use before relocation is on. */
- ld r1,PACAEMERGSP(r13)
- subi r1,r1,STACK_FRAME_OVERHEAD
-
- b .__secondary_start
-
-#endif /* CONFIG_PPC_PMAC */
-
-/*
- * This function is called after the master CPU has released the
- * secondary processors. The execution environment is relocation off.
- * The paca for this processor has the following fields initialized at
- * this point:
- * 1. Processor number
- * 2. Segment table pointer (virtual address)
- * On entry the following are set:
- * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries
- * r24 = cpu# (in Linux terms)
- * r13 = paca virtual address
- * SPRG3 = paca virtual address
- */
-_GLOBAL(__secondary_start)
-
- HMT_MEDIUM /* Set thread priority to MEDIUM */
-
- ld r2,PACATOC(r13)
-
- /* Do early setup for that CPU */
- bl .early_setup_secondary
-
- /* Initialize the kernel stack. Just a repeat for iSeries. */
- LOADADDR(r3,current_set)
- sldi r28,r24,3 /* get current_set[cpu#] */
- ldx r1,r3,r28
- addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
- std r1,PACAKSAVE(r13)
-
- li r7,0
- mtlr r7
-
- /* enable MMU and jump to start_secondary */
- LOADADDR(r3,.start_secondary_prolog)
- SET_REG_TO_CONST(r4, MSR_KERNEL)
-#ifdef DO_SOFT_DISABLE
- ori r4,r4,MSR_EE
-#endif
- mtspr SPRN_SRR0,r3
- mtspr SPRN_SRR1,r4
- rfid
- b . /* prevent speculative execution */
-
-/*
- * Running with relocation on at this point. All we want to do is
- * zero the stack back-chain pointer before going into C code.
- */
-_GLOBAL(start_secondary_prolog)
- li r3,0
- std r3,0(r1) /* Zero the stack frame pointer */
- bl .start_secondary
-#endif
-
-/*
- * This subroutine clobbers r11 and r12
- */
-_GLOBAL(enable_64b_mode)
- mfmsr r11 /* grab the current MSR */
- li r12,1
- rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
- or r11,r11,r12
- li r12,1
- rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
- or r11,r11,r12
- mtmsrd r11
- isync
- blr
-
-#ifdef CONFIG_PPC_MULTIPLATFORM
-/*
- * This is where the main kernel code starts.
- */
-_STATIC(start_here_multiplatform)
- /* get a new offset, now that the kernel has moved. */
- bl .reloc_offset
- mr r26,r3
-
- /* Clear out the BSS. It may have been done in prom_init,
- * already but that's irrelevant since prom_init will soon
- * be detached from the kernel completely. Besides, we need
- * to clear it now for kexec-style entry.
- */
- LOADADDR(r11,__bss_stop)
- LOADADDR(r8,__bss_start)
- sub r11,r11,r8 /* bss size */
- addi r11,r11,7 /* round up to an even double word */
- rldicl. r11,r11,61,3 /* shift right by 3 */
- beq 4f
- addi r8,r8,-8
- li r0,0
- mtctr r11 /* zero this many doublewords */
-3: stdu r0,8(r8)
- bdnz 3b
-4:
-
- mfmsr r6
- ori r6,r6,MSR_RI
- mtmsrd r6 /* RI on */
-
-#ifdef CONFIG_HMT
- /* Start up the second thread on cpu 0 */
- mfspr r3,SPRN_PVR
- srwi r3,r3,16
- cmpwi r3,0x34 /* Pulsar */
- beq 90f
- cmpwi r3,0x36 /* Icestar */
- beq 90f
- cmpwi r3,0x37 /* SStar */
- beq 90f
- b 91f /* HMT not supported */
-90: li r3,0
- bl .hmt_start_secondary
-91:
-#endif
-
- /* The following gets the stack and TOC set up with the regs */
- /* pointing to the real addr of the kernel stack. This is */
- /* all done to support the C function call below which sets */
- /* up the htab. This is done because we have relocated the */
- /* kernel but are still running in real mode. */
-
- LOADADDR(r3,init_thread_union)
- sub r3,r3,r26
-
- /* set up a stack pointer (physical address) */
- addi r1,r3,THREAD_SIZE
- li r0,0
- stdu r0,-STACK_FRAME_OVERHEAD(r1)
-
- /* set up the TOC (physical address) */
- LOADADDR(r2,__toc_start)
- addi r2,r2,0x4000
- addi r2,r2,0x4000
- sub r2,r2,r26
-
- LOADADDR(r3,cpu_specs)
- sub r3,r3,r26
- LOADADDR(r4,cur_cpu_spec)
- sub r4,r4,r26
- mr r5,r26
- bl .identify_cpu
-
- /* Save some low level config HIDs of CPU0 to be copied to
- * other CPUs later on, or used for suspend/resume
- */
- bl .__save_cpu_setup
- sync
-
- /* Setup a valid physical PACA pointer in SPRG3 for early_setup
- * note that boot_cpuid can always be 0 nowadays since there is
- * nowhere it can be initialized differently before we reach this
- * code
- */
- LOADADDR(r27, boot_cpuid)
- sub r27,r27,r26
- lwz r27,0(r27)
-
- LOADADDR(r24, paca) /* Get base vaddr of paca array */
- mulli r13,r27,PACA_SIZE /* Calculate vaddr of right paca */
- add r13,r13,r24 /* for this processor. */
- sub r13,r13,r26 /* convert to physical addr */
- mtspr SPRN_SPRG3,r13 /* PPPBBB: Temp... -Peter */
-
- /* Do very early kernel initializations, including initial hash table,
- * stab and slb setup before we turn on relocation. */
-
- /* Restore parameters passed from prom_init/kexec */
- mr r3,r31
- bl .early_setup
-
- LOADADDR(r3,.start_here_common)
- SET_REG_TO_CONST(r4, MSR_KERNEL)
- mtspr SPRN_SRR0,r3
- mtspr SPRN_SRR1,r4
- rfid
- b . /* prevent speculative execution */
-#endif /* CONFIG_PPC_MULTIPLATFORM */
-
- /* This is where all platforms converge execution */
-_STATIC(start_here_common)
- /* relocation is on at this point */
-
- /* The following code sets up the SP and TOC now that we are */
- /* running with translation enabled. */
-
- LOADADDR(r3,init_thread_union)
-
- /* set up the stack */
- addi r1,r3,THREAD_SIZE
- li r0,0
- stdu r0,-STACK_FRAME_OVERHEAD(r1)
-
- /* Apply the CPUs-specific fixups (nop out sections not relevant
- * to this CPU
- */
- li r3,0
- bl .do_cpu_ftr_fixups
-
- LOADADDR(r26, boot_cpuid)
- lwz r26,0(r26)
-
- LOADADDR(r24, paca) /* Get base vaddr of paca array */
- mulli r13,r26,PACA_SIZE /* Calculate vaddr of right paca */
- add r13,r13,r24 /* for this processor. */
- mtspr SPRN_SPRG3,r13
-
- /* ptr to current */
- LOADADDR(r4,init_task)
- std r4,PACACURRENT(r13)
-
- /* Load the TOC */
- ld r2,PACATOC(r13)
- std r1,PACAKSAVE(r13)
-
- bl .setup_system
-
- /* Load up the kernel context */
-5:
-#ifdef DO_SOFT_DISABLE
- li r5,0
- stb r5,PACAPROCENABLED(r13) /* Soft Disabled */
- mfmsr r5
- ori r5,r5,MSR_EE /* Hard Enabled */
- mtmsrd r5
-#endif
-
- bl .start_kernel
-
-_GLOBAL(hmt_init)
-#ifdef CONFIG_HMT
- LOADADDR(r5, hmt_thread_data)
- mfspr r7,SPRN_PVR
- srwi r7,r7,16
- cmpwi r7,0x34 /* Pulsar */
- beq 90f
- cmpwi r7,0x36 /* Icestar */
- beq 91f
- cmpwi r7,0x37 /* SStar */
- beq 91f
- b 101f
-90: mfspr r6,SPRN_PIR
- andi. r6,r6,0x1f
- b 92f
-91: mfspr r6,SPRN_PIR
- andi. r6,r6,0x3ff
-92: sldi r4,r24,3
- stwx r6,r5,r4
- bl .hmt_start_secondary
- b 101f
-
-__hmt_secondary_hold:
- LOADADDR(r5, hmt_thread_data)
- clrldi r5,r5,4
- li r7,0
- mfspr r6,SPRN_PIR
- mfspr r8,SPRN_PVR
- srwi r8,r8,16
- cmpwi r8,0x34
- bne 93f
- andi. r6,r6,0x1f
- b 103f
-93: andi. r6,r6,0x3f
-
-103: lwzx r8,r5,r7
- cmpw r8,r6
- beq 104f
- addi r7,r7,8
- b 103b
-
-104: addi r7,r7,4
- lwzx r9,r5,r7
- mr r24,r9
-101:
-#endif
- mr r3,r24
- b .pSeries_secondary_smp_init
-
-#ifdef CONFIG_HMT
-_GLOBAL(hmt_start_secondary)
- LOADADDR(r4,__hmt_secondary_hold)
- clrldi r4,r4,4
- mtspr SPRN_NIADORM, r4
- mfspr r4, SPRN_MSRDORM
- li r5, -65
- and r4, r4, r5
- mtspr SPRN_MSRDORM, r4
- lis r4,0xffef
- ori r4,r4,0x7403
- mtspr SPRN_TSC, r4
- li r4,0x1f4
- mtspr SPRN_TST, r4
- mfspr r4, SPRN_HID0
- ori r4, r4, 0x1
- mtspr SPRN_HID0, r4
- mfspr r4, SPRN_CTRLF
- oris r4, r4, 0x40
- mtspr SPRN_CTRLT, r4
- blr
-#endif
-
-/*
- * We put a few things here that have to be page-aligned.
- * This stuff goes at the beginning of the bss, which is page-aligned.
- */
- .section ".bss"
-
- .align PAGE_SHIFT
-
- .globl empty_zero_page
-empty_zero_page:
- .space PAGE_SIZE
-
- .globl swapper_pg_dir
-swapper_pg_dir:
- .space PAGE_SIZE
-
-/*
- * This space gets a copy of optional info passed to us by the bootstrap
- * Used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
- .globl cmd_line
-cmd_line:
- .space COMMAND_LINE_SIZE