diff options
Diffstat (limited to 'arch/ppc')
| -rw-r--r-- | arch/ppc/kernel/Makefile | 4 | ||||
| -rw-r--r-- | arch/ppc/kernel/cpu_setup_6xx.S | 474 | ||||
| -rw-r--r-- | arch/ppc/kernel/temp.c | 271 |
3 files changed, 0 insertions, 749 deletions
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 3d50a268683..d6a4863d4e7 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -13,7 +13,6 @@ extra-y += vmlinux.lds obj-y := entry.o traps.o time.o misc.o \ setup.o \ ppc_htab.o -obj-$(CONFIG_6xx) += cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o @@ -21,7 +20,6 @@ obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_RAPIDIO) += rio.o obj-$(CONFIG_KGDB) += ppc-stub.o obj-$(CONFIG_SMP) += smp.o smp-tbsync.o -obj-$(CONFIG_TAU) += temp.o ifndef CONFIG_E200 obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o endif @@ -34,12 +32,10 @@ endif # These are here while we do the architecture merge else -obj-$(CONFIG_6xx) += cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_KGDB) += ppc-stub.o -obj-$(CONFIG_TAU) += temp.o ifndef CONFIG_E200 obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o endif diff --git a/arch/ppc/kernel/cpu_setup_6xx.S b/arch/ppc/kernel/cpu_setup_6xx.S deleted file mode 100644 index 55ed7716636..00000000000 --- a/arch/ppc/kernel/cpu_setup_6xx.S +++ /dev/null @@ -1,474 +0,0 @@ -/* - * This file contains low level CPU setup functions. - * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/cputable.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> -#include <asm/cache.h> - -_GLOBAL(__setup_cpu_603) - b setup_common_caches -_GLOBAL(__setup_cpu_604) - mflr r4 - bl setup_common_caches - bl setup_604_hid0 - mtlr r4 - blr -_GLOBAL(__setup_cpu_750) - mflr r4 - bl __init_fpu_registers - bl setup_common_caches - bl setup_750_7400_hid0 - mtlr r4 - blr -_GLOBAL(__setup_cpu_750cx) - mflr r4 - bl __init_fpu_registers - bl setup_common_caches - bl setup_750_7400_hid0 - bl setup_750cx - mtlr r4 - blr -_GLOBAL(__setup_cpu_750fx) - mflr r4 - bl __init_fpu_registers - bl setup_common_caches - bl setup_750_7400_hid0 - bl setup_750fx - mtlr r4 - blr -_GLOBAL(__setup_cpu_7400) - mflr r4 - bl __init_fpu_registers - bl setup_7400_workarounds - bl setup_common_caches - bl setup_750_7400_hid0 - mtlr r4 - blr -_GLOBAL(__setup_cpu_7410) - mflr r4 - bl __init_fpu_registers - bl setup_7410_workarounds - bl setup_common_caches - bl setup_750_7400_hid0 - li r3,0 - mtspr SPRN_L2CR2,r3 - mtlr r4 - blr -_GLOBAL(__setup_cpu_745x) - mflr r4 - bl setup_common_caches - bl setup_745x_specifics - mtlr r4 - blr - -/* Enable caches for 603's, 604, 750 & 7400 */ -setup_common_caches: - mfspr r11,SPRN_HID0 - andi. r0,r11,HID0_DCE - ori r11,r11,HID0_ICE|HID0_DCE - ori r8,r11,HID0_ICFI - bne 1f /* don't invalidate the D-cache */ - ori r8,r8,HID0_DCI /* unless it wasn't enabled */ -1: sync - mtspr SPRN_HID0,r8 /* enable and invalidate caches */ - sync - mtspr SPRN_HID0,r11 /* enable caches */ - sync - isync - blr - -/* 604, 604e, 604ev, ... - * Enable superscalar execution & branch history table - */ -setup_604_hid0: - mfspr r11,SPRN_HID0 - ori r11,r11,HID0_SIED|HID0_BHTE - ori r8,r11,HID0_BTCD - sync - mtspr SPRN_HID0,r8 /* flush branch target address cache */ - sync /* on 604e/604r */ - mtspr SPRN_HID0,r11 - sync - isync - blr - -/* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some - * erratas we work around here. - * Moto MPC710CE.pdf describes them, those are errata - * #3, #4 and #5 - * Note that we assume the firmware didn't choose to - * apply other workarounds (there are other ones documented - * in the .pdf). It appear that Apple firmware only works - * around #3 and with the same fix we use. We may want to - * check if the CPU is using 60x bus mode in which case - * the workaround for errata #4 is useless. Also, we may - * want to explicitely clear HID0_NOPDST as this is not - * needed once we have applied workaround #5 (though it's - * not set by Apple's firmware at least). - */ -setup_7400_workarounds: - mfpvr r3 - rlwinm r3,r3,0,20,31 - cmpwi 0,r3,0x0207 - ble 1f - blr -setup_7410_workarounds: - mfpvr r3 - rlwinm r3,r3,0,20,31 - cmpwi 0,r3,0x0100 - bnelr -1: - mfspr r11,SPRN_MSSSR0 - /* Errata #3: Set L1OPQ_SIZE to 0x10 */ - rlwinm r11,r11,0,9,6 - oris r11,r11,0x0100 - /* Errata #4: Set L2MQ_SIZE to 1 (check for MPX mode first ?) */ - oris r11,r11,0x0002 - /* Errata #5: Set DRLT_SIZE to 0x01 */ - rlwinm r11,r11,0,5,2 - oris r11,r11,0x0800 - sync - mtspr SPRN_MSSSR0,r11 - sync - isync - blr - -/* 740/750/7400/7410 - * Enable Store Gathering (SGE), Address Brodcast (ABE), - * Branch History Table (BHTE), Branch Target ICache (BTIC) - * Dynamic Power Management (DPM), Speculative (SPD) - * Clear Instruction cache throttling (ICTC) - */ -setup_750_7400_hid0: - mfspr r11,SPRN_HID0 - ori r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC - oris r11,r11,HID0_DPM@h -BEGIN_FTR_SECTION - xori r11,r11,HID0_BTIC -END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC) -BEGIN_FTR_SECTION - xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */ -END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM) - li r3,HID0_SPD - andc r11,r11,r3 /* clear SPD: enable speculative */ - li r3,0 - mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */ - isync - mtspr SPRN_HID0,r11 - sync - isync - blr - -/* 750cx specific - * Looks like we have to disable NAP feature for some PLL settings... - * (waiting for confirmation) - */ -setup_750cx: - mfspr r10, SPRN_HID1 - rlwinm r10,r10,4,28,31 - cmpwi cr0,r10,7 - cmpwi cr1,r10,9 - cmpwi cr2,r10,11 - cror 4*cr0+eq,4*cr0+eq,4*cr1+eq - cror 4*cr0+eq,4*cr0+eq,4*cr2+eq - bnelr - lwz r6,CPU_SPEC_FEATURES(r5) - li r7,CPU_FTR_CAN_NAP - andc r6,r6,r7 - stw r6,CPU_SPEC_FEATURES(r5) - blr - -/* 750fx specific - */ -setup_750fx: - blr - -/* MPC 745x - * Enable Store Gathering (SGE), Branch Folding (FOLD) - * Branch History Table (BHTE), Branch Target ICache (BTIC) - * Dynamic Power Management (DPM), Speculative (SPD) - * Ensure our data cache instructions really operate. - * Timebase has to be running or we wouldn't have made it here, - * just ensure we don't disable it. - * Clear Instruction cache throttling (ICTC) - * Enable L2 HW prefetch - */ -setup_745x_specifics: - /* We check for the presence of an L3 cache setup by - * the firmware. If any, we disable NAP capability as - * it's known to be bogus on rev 2.1 and earlier - */ - mfspr r11,SPRN_L3CR - andis. r11,r11,L3CR_L3E@h - beq 1f - lwz r6,CPU_SPEC_FEATURES(r5) - andi. r0,r6,CPU_FTR_L3_DISABLE_NAP - beq 1f - li r7,CPU_FTR_CAN_NAP - andc r6,r6,r7 - stw r6,CPU_SPEC_FEATURES(r5) -1: - mfspr r11,SPRN_HID0 - - /* All of the bits we have to set..... - */ - ori r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE - ori r11,r11,HID0_LRSTK | HID0_BTIC - oris r11,r11,HID0_DPM@h -BEGIN_FTR_SECTION - xori r11,r11,HID0_BTIC -END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC) -BEGIN_FTR_SECTION - xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */ -END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM) - - /* All of the bits we have to clear.... - */ - li r3,HID0_SPD | HID0_NOPDST | HID0_NOPTI - andc r11,r11,r3 /* clear SPD: enable speculative */ - li r3,0 - - mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */ - isync - mtspr SPRN_HID0,r11 - sync - isync - - /* Enable L2 HW prefetch, if L2 is enabled - */ - mfspr r3,SPRN_L2CR - andis. r3,r3,L2CR_L2E@h - beqlr - mfspr r3,SPRN_MSSCR0 - ori r3,r3,3 - sync - mtspr SPRN_MSSCR0,r3 - sync - isync - blr - -/* - * Initialize the FPU registers. This is needed to work around an errata - * in some 750 cpus where using a not yet initialized FPU register after - * power on reset may hang the CPU - */ -_GLOBAL(__init_fpu_registers) - mfmsr r10 - ori r11,r10,MSR_FP - mtmsr r11 - isync - addis r9,r3,empty_zero_page@ha - addi r9,r9,empty_zero_page@l - REST_32FPRS(0,r9) - sync - mtmsr r10 - isync - blr - - -/* Definitions for the table use to save CPU states */ -#define CS_HID0 0 -#define CS_HID1 4 -#define CS_HID2 8 -#define CS_MSSCR0 12 -#define CS_MSSSR0 16 -#define CS_ICTRL 20 -#define CS_LDSTCR 24 -#define CS_LDSTDB 28 -#define CS_SIZE 32 - - .data - .balign L1_CACHE_BYTES -cpu_state_storage: - .space CS_SIZE - .balign L1_CACHE_BYTES,0 - .text - -/* Called in normal context to backup CPU 0 state. This - * does not include cache settings. This function is also - * called for machine sleep. This does not include the MMU - * setup, BATs, etc... but rather the "special" registers - * like HID0, HID1, MSSCR0, etc... - */ -_GLOBAL(__save_cpu_setup) - /* Some CR fields are volatile, we back it up all */ - mfcr r7 - - /* Get storage ptr */ - lis r5,cpu_state_storage@h - ori r5,r5,cpu_state_storage@l - - /* Save HID0 (common to all CONFIG_6xx cpus) */ - mfspr r3,SPRN_HID0 - stw r3,CS_HID0(r5) - - /* Now deal with CPU type dependent registers */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmplwi cr0,r3,0x8000 /* 7450 */ - cmplwi cr1,r3,0x000c /* 7400 */ - cmplwi cr2,r3,0x800c /* 7410 */ - cmplwi cr3,r3,0x8001 /* 7455 */ - cmplwi cr4,r3,0x8002 /* 7457 */ - cmplwi cr5,r3,0x8003 /* 7447A */ - cmplwi cr6,r3,0x7000 /* 750FX */ - cmplwi cr7,r3,0x8004 /* 7448 */ - /* cr1 is 7400 || 7410 */ - cror 4*cr1+eq,4*cr1+eq,4*cr2+eq - /* cr0 is 74xx */ - cror 4*cr0+eq,4*cr0+eq,4*cr3+eq - cror 4*cr0+eq,4*cr0+eq,4*cr4+eq - cror 4*cr0+eq,4*cr0+eq,4*cr1+eq - cror 4*cr0+eq,4*cr0+eq,4*cr5+eq - cror 4*cr0+eq,4*cr0+eq,4*cr7+eq - bne 1f - /* Backup 74xx specific regs */ - mfspr r4,SPRN_MSSCR0 - stw r4,CS_MSSCR0(r5) - mfspr r4,SPRN_MSSSR0 - stw r4,CS_MSSSR0(r5) - beq cr1,1f - /* Backup 745x specific registers */ - mfspr r4,SPRN_HID1 - stw r4,CS_HID1(r5) - mfspr r4,SPRN_ICTRL - stw r4,CS_ICTRL(r5) - mfspr r4,SPRN_LDSTCR - stw r4,CS_LDSTCR(r5) - mfspr r4,SPRN_LDSTDB - stw r4,CS_LDSTDB(r5) -1: - bne cr6,1f - /* Backup 750FX specific registers */ - mfspr r4,SPRN_HID1 - stw r4,CS_HID1(r5) - /* If rev 2.x, backup HID2 */ - mfspr r3,SPRN_PVR - andi. r3,r3,0xff00 - cmpwi cr0,r3,0x0200 - bne 1f - mfspr r4,SPRN_HID2 - stw r4,CS_HID2(r5) -1: - mtcr r7 - blr - -/* Called with no MMU context (typically MSR:IR/DR off) to - * restore CPU state as backed up by the previous - * function. This does not include cache setting - */ -_GLOBAL(__restore_cpu_setup) - /* Some CR fields are volatile, we back it up all */ - mfcr r7 - - /* Get storage ptr */ - lis r5,(cpu_state_storage-KERNELBASE)@h - ori r5,r5,cpu_state_storage@l - - /* Restore HID0 */ - lwz r3,CS_HID0(r5) - sync - isync - mtspr SPRN_HID0,r3 - sync - isync - - /* Now deal with CPU type dependent registers */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmplwi cr0,r3,0x8000 /* 7450 */ - cmplwi cr1,r3,0x000c /* 7400 */ - cmplwi cr2,r3,0x800c /* 7410 */ - cmplwi cr3,r3,0x8001 /* 7455 */ - cmplwi cr4,r3,0x8002 /* 7457 */ - cmplwi cr5,r3,0x8003 /* 7447A */ - cmplwi cr6,r3,0x7000 /* 750FX */ - cmplwi cr7,r3,0x8004 /* 7448 */ - /* cr1 is 7400 || 7410 */ - cror 4*cr1+eq,4*cr1+eq,4*cr2+eq - /* cr0 is 74xx */ - cror 4*cr0+eq,4*cr0+eq,4*cr3+eq - cror 4*cr0+eq,4*cr0+eq,4*cr4+eq - cror 4*cr0+eq,4*cr0+eq,4*cr1+eq - cror 4*cr0+eq,4*cr0+eq,4*cr5+eq - cror 4*cr0+eq,4*cr0+eq,4*cr7+eq - bne 2f - /* Restore 74xx specific regs */ - lwz r4,CS_MSSCR0(r5) - sync - mtspr SPRN_MSSCR0,r4 - sync - isync - lwz r4,CS_MSSSR0(r5) - sync - mtspr SPRN_MSSSR0,r4 - sync - isync - bne cr2,1f - /* Clear 7410 L2CR2 */ - li r4,0 - mtspr SPRN_L2CR2,r4 -1: beq cr1,2f - /* Restore 745x specific registers */ - lwz r4,CS_HID1(r5) - sync - mtspr SPRN_HID1,r4 - isync - sync - lwz r4,CS_ICTRL(r5) - sync - mtspr SPRN_ICTRL,r4 - isync - sync - lwz r4,CS_LDSTCR(r5) - sync - mtspr SPRN_LDSTCR,r4 - isync - sync - lwz r4,CS_LDSTDB(r5) - sync - mtspr SPRN_LDSTDB,r4 - isync - sync -2: bne cr6,1f - /* Restore 750FX specific registers - * that is restore HID2 on rev 2.x and PLL config & switch - * to PLL 0 on all - */ - /* If rev 2.x, restore HID2 with low voltage bit cleared */ - mfspr r3,SPRN_PVR - andi. r3,r3,0xff00 - cmpwi cr0,r3,0x0200 - bne 4f - lwz r4,CS_HID2(r5) - rlwinm r4,r4,0,19,17 - mtspr SPRN_HID2,r4 - sync -4: - lwz r4,CS_HID1(r5) - rlwinm r5,r4,0,16,14 - mtspr SPRN_HID1,r5 - /* Wait for PLL to stabilize */ - mftbl r5 -3: mftbl r6 - sub r6,r6,r5 - cmplwi cr0,r6,10000 - ble 3b - /* Setup final PLL */ - mtspr SPRN_HID1,r4 -1: - mtcr r7 - blr - diff --git a/arch/ppc/kernel/temp.c b/arch/ppc/kernel/temp.c deleted file mode 100644 index 26bd8ea35a4..00000000000 --- a/arch/ppc/kernel/temp.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * temp.c Thermal management for cpu's with Thermal Assist Units - * - * Written by Troy Benjegerdes <hozer@drgw.net> - * - * TODO: - * dynamic power management to limit peak CPU temp (using ICTC) - * calibration??? - * - * Silly, crazy ideas: use cpu load (from scheduler) and ICTC to extend battery - * life in portables, and add a 'performance/watt' metric somewhere in /proc - */ - -#include <linux/config.h> -#include <linux/errno.h> -#include <linux/jiffies.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/init.h> - -#include <asm/io.h> -#include <asm/reg.h> -#include <asm/nvram.h> -#include <asm/cache.h> -#include <asm/8xx_immap.h> -#include <asm/machdep.h> - -static struct tau_temp -{ - int interrupts; - unsigned char low; - unsigned char high; - unsigned char grew; -} tau[NR_CPUS]; - -struct timer_list tau_timer; - -#undef DEBUG - -/* TODO: put these in a /proc interface, with some sanity checks, and maybe - * dynamic adjustment to minimize # of interrupts */ -/* configurable values for step size and how much to expand the window when - * we get an interrupt. These are based on the limit that was out of range */ -#define step_size 2 /* step size when temp goes out of range */ -#define window_expand 1 /* expand the window by this much */ -/* configurable values for shrinking the window */ -#define shrink_timer 2*HZ /* period between shrinking the window */ -#define min_window 2 /* minimum window size, degrees C */ - -void set_thresholds(unsigned long cpu) -{ -#ifdef CONFIG_TAU_INT - /* - * setup THRM1, - * threshold, valid bit, enable interrupts, interrupt when below threshold - */ - mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID); - - /* setup THRM2, - * threshold, valid bit, enable interrupts, interrupt when above threshhold - */ - mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE); -#else - /* same thing but don't enable interrupts */ - mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TID); - mtspr(SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V); -#endif -} - -void TAUupdate(int cpu) -{ - unsigned thrm; - -#ifdef DEBUG - printk("TAUupdate "); -#endif - - /* if both thresholds are crossed, the step_sizes cancel out - * and the window winds up getting expanded twice. */ - if((thrm = mfspr(SPRN_THRM1)) & THRM1_TIV){ /* is valid? */ - if(thrm & THRM1_TIN){ /* crossed low threshold */ - if (tau[cpu].low >= step_size){ - tau[cpu].low -= step_size; - tau[cpu].high -= (step_size - window_expand); - } - tau[cpu].grew = 1; -#ifdef DEBUG - printk("low threshold crossed "); -#endif - } - } - if((thrm = mfspr(SPRN_THRM2)) & THRM1_TIV){ /* is valid? */ - if(thrm & THRM1_TIN){ /* crossed high threshold */ - if (tau[cpu].high <= 127-step_size){ - tau[cpu].low += (step_size - window_expand); - tau[cpu].high += step_size; - } - tau[cpu].grew = 1; -#ifdef DEBUG - printk("high threshold crossed "); -#endif - } - } - -#ifdef DEBUG - printk("grew = %d\n", tau[cpu].grew); -#endif - -#ifndef CONFIG_TAU_INT /* tau_timeout will do this if not using interrupts */ - set_thresholds(cpu); -#endif - -} - -#ifdef CONFIG_TAU_INT -/* - * TAU interrupts - called when we have a thermal assist unit interrupt - * with interrupts disabled - */ - -void TAUException(struct pt_regs * regs) -{ - int cpu = smp_processor_id(); - - irq_enter(); - tau[cpu].interrupts++; - - TAUupdate(cpu); - - irq_exit(); -} -#endif /* CONFIG_TAU_INT */ - -static void tau_timeout(void * info) -{ - int cpu; - unsigned long flags; - int size; - int shrink; - - /* disabling interrupts *should* be okay */ - local_irq_save(flags); - cpu = smp_processor_id(); - -#ifndef CONFIG_TAU_INT - TAUupdate(cpu); -#endif - - size = tau[cpu].high - tau[cpu].low; - if (size > min_window && ! tau[cpu].grew) { - /* do an exponential shrink of half the amount currently over size */ - shrink = (2 + size - min_window) / 4; - if (shrink) { - tau[cpu].low += shrink; - tau[cpu].high -= shrink; - } else { /* size must have been min_window + 1 */ - tau[cpu].low += 1; -#if 1 /* debug */ - if ((tau[cpu].high - tau[cpu].low) != min_window){ - printk(KERN_ERR "temp.c: line %d, logic error\n", __LINE__); - } -#endif - } - } - - tau[cpu].grew = 0; - - set_thresholds(cpu); - - /* - * Do the enable every time, since otherwise a bunch of (relatively) - * complex sleep code needs to be added. One mtspr every time - * tau_timeout is called is probably not a big deal. - * - * Enable thermal sensor and set up sample interval timer - * need 20 us to do the compare.. until a nice 'cpu_speed' function - * call is implemented, just assume a 500 mhz clock. It doesn't really - * matter if we take too long for a compare since it's all interrupt - * driven anyway. - * - * use a extra long time.. (60 us @ 500 mhz) - */ - mtspr(SPRN_THRM3, THRM3_SITV(500*60) | THRM3_E); - - local_irq_restore(flags); -} - -static void tau_timeout_smp(unsigned long unused) -{ - - /* schedule ourselves to be run again */ - mod_timer(&tau_timer, jiffies + shrink_timer) ; - on_each_cpu(tau_timeout, NULL, 1, 0); -} - -/* - * setup the TAU - * - * Set things up to use THRM1 as a temperature lower bound, and THRM2 as an upper bound. - * Start off at zero - */ - -int tau_initialized = 0; - -void __init TAU_init_smp(void * info) -{ - unsigned long cpu = smp_processor_id(); - - /* set these to a reasonable value and let the timer shrink the - * window */ - tau[cpu].low = 5; - tau[cpu].high = 120; - - set_thresholds(cpu); -} - -int __init TAU_init(void) -{ - /* We assume in SMP that if one CPU has TAU support, they - * all have it --BenH - */ - if (!cpu_has_feature(CPU_FTR_TAU)) { - printk("Thermal assist unit not available\n"); - tau_initialized = 0; - return 1; - } - - - /* first, set up the window shrinking timer */ - init_timer(&tau_timer); - tau_timer.function = tau_timeout_smp; - tau_timer.expires = jiffies + shrink_timer; - add_timer(&tau_timer); - - on_each_cpu(TAU_init_smp, NULL, 1, 0); - - printk("Thermal assist unit "); -#ifdef CONFIG_TAU_INT - printk("using interrupts, "); -#else - printk("using timers, "); -#endif - printk("shrink_timer: %d jiffies\n", shrink_timer); - tau_initialized = 1; - - return 0; -} - -__initcall(TAU_init); - -/* - * return current temp - */ - -u32 cpu_temp_both(unsigned long cpu) -{ - return ((tau[cpu].high << 16) | tau[cpu].low); -} - -int cpu_temp(unsigned long cpu) -{ - return ((tau[cpu].high + tau[cpu].low) / 2); -} - -int tau_interrupts(unsigned long cpu) -{ - return (tau[cpu].interrupts); -} |