aboutsummaryrefslogtreecommitdiff
path: root/arch/ppc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc')
-rw-r--r--arch/ppc/kernel/Makefile4
-rw-r--r--arch/ppc/kernel/cpu_setup_6xx.S474
-rw-r--r--arch/ppc/kernel/temp.c271
3 files changed, 0 insertions, 749 deletions
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index 3d50a268683..d6a4863d4e7 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -13,7 +13,6 @@ extra-y += vmlinux.lds
obj-y := entry.o traps.o time.o misc.o \
setup.o \
ppc_htab.o
-obj-$(CONFIG_6xx) += cpu_setup_6xx.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o
@@ -21,7 +20,6 @@ obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_RAPIDIO) += rio.o
obj-$(CONFIG_KGDB) += ppc-stub.o
obj-$(CONFIG_SMP) += smp.o smp-tbsync.o
-obj-$(CONFIG_TAU) += temp.o
ifndef CONFIG_E200
obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o
endif
@@ -34,12 +32,10 @@ endif
# These are here while we do the architecture merge
else
-obj-$(CONFIG_6xx) += cpu_setup_6xx.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o
obj-$(CONFIG_KGDB) += ppc-stub.o
-obj-$(CONFIG_TAU) += temp.o
ifndef CONFIG_E200
obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o
endif
diff --git a/arch/ppc/kernel/cpu_setup_6xx.S b/arch/ppc/kernel/cpu_setup_6xx.S
deleted file mode 100644
index 55ed7716636..00000000000
--- a/arch/ppc/kernel/cpu_setup_6xx.S
+++ /dev/null
@@ -1,474 +0,0 @@
-/*
- * This file contains low level CPU setup functions.
- * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/config.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/cputable.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/cache.h>
-
-_GLOBAL(__setup_cpu_603)
- b setup_common_caches
-_GLOBAL(__setup_cpu_604)
- mflr r4
- bl setup_common_caches
- bl setup_604_hid0
- mtlr r4
- blr
-_GLOBAL(__setup_cpu_750)
- mflr r4
- bl __init_fpu_registers
- bl setup_common_caches
- bl setup_750_7400_hid0
- mtlr r4
- blr
-_GLOBAL(__setup_cpu_750cx)
- mflr r4
- bl __init_fpu_registers
- bl setup_common_caches
- bl setup_750_7400_hid0
- bl setup_750cx
- mtlr r4
- blr
-_GLOBAL(__setup_cpu_750fx)
- mflr r4
- bl __init_fpu_registers
- bl setup_common_caches
- bl setup_750_7400_hid0
- bl setup_750fx
- mtlr r4
- blr
-_GLOBAL(__setup_cpu_7400)
- mflr r4
- bl __init_fpu_registers
- bl setup_7400_workarounds
- bl setup_common_caches
- bl setup_750_7400_hid0
- mtlr r4
- blr
-_GLOBAL(__setup_cpu_7410)
- mflr r4
- bl __init_fpu_registers
- bl setup_7410_workarounds
- bl setup_common_caches
- bl setup_750_7400_hid0
- li r3,0
- mtspr SPRN_L2CR2,r3
- mtlr r4
- blr
-_GLOBAL(__setup_cpu_745x)
- mflr r4
- bl setup_common_caches
- bl setup_745x_specifics
- mtlr r4
- blr
-
-/* Enable caches for 603's, 604, 750 & 7400 */
-setup_common_caches:
- mfspr r11,SPRN_HID0
- andi. r0,r11,HID0_DCE
- ori r11,r11,HID0_ICE|HID0_DCE
- ori r8,r11,HID0_ICFI
- bne 1f /* don't invalidate the D-cache */
- ori r8,r8,HID0_DCI /* unless it wasn't enabled */
-1: sync
- mtspr SPRN_HID0,r8 /* enable and invalidate caches */
- sync
- mtspr SPRN_HID0,r11 /* enable caches */
- sync
- isync
- blr
-
-/* 604, 604e, 604ev, ...
- * Enable superscalar execution & branch history table
- */
-setup_604_hid0:
- mfspr r11,SPRN_HID0
- ori r11,r11,HID0_SIED|HID0_BHTE
- ori r8,r11,HID0_BTCD
- sync
- mtspr SPRN_HID0,r8 /* flush branch target address cache */
- sync /* on 604e/604r */
- mtspr SPRN_HID0,r11
- sync
- isync
- blr
-
-/* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
- * erratas we work around here.
- * Moto MPC710CE.pdf describes them, those are errata
- * #3, #4 and #5
- * Note that we assume the firmware didn't choose to
- * apply other workarounds (there are other ones documented
- * in the .pdf). It appear that Apple firmware only works
- * around #3 and with the same fix we use. We may want to
- * check if the CPU is using 60x bus mode in which case
- * the workaround for errata #4 is useless. Also, we may
- * want to explicitely clear HID0_NOPDST as this is not
- * needed once we have applied workaround #5 (though it's
- * not set by Apple's firmware at least).
- */
-setup_7400_workarounds:
- mfpvr r3
- rlwinm r3,r3,0,20,31
- cmpwi 0,r3,0x0207
- ble 1f
- blr
-setup_7410_workarounds:
- mfpvr r3
- rlwinm r3,r3,0,20,31
- cmpwi 0,r3,0x0100
- bnelr
-1:
- mfspr r11,SPRN_MSSSR0
- /* Errata #3: Set L1OPQ_SIZE to 0x10 */
- rlwinm r11,r11,0,9,6
- oris r11,r11,0x0100
- /* Errata #4: Set L2MQ_SIZE to 1 (check for MPX mode first ?) */
- oris r11,r11,0x0002
- /* Errata #5: Set DRLT_SIZE to 0x01 */
- rlwinm r11,r11,0,5,2
- oris r11,r11,0x0800
- sync
- mtspr SPRN_MSSSR0,r11
- sync
- isync
- blr
-
-/* 740/750/7400/7410
- * Enable Store Gathering (SGE), Address Brodcast (ABE),
- * Branch History Table (BHTE), Branch Target ICache (BTIC)
- * Dynamic Power Management (DPM), Speculative (SPD)
- * Clear Instruction cache throttling (ICTC)
- */
-setup_750_7400_hid0:
- mfspr r11,SPRN_HID0
- ori r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC
- oris r11,r11,HID0_DPM@h
-BEGIN_FTR_SECTION
- xori r11,r11,HID0_BTIC
-END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
-BEGIN_FTR_SECTION
- xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */
-END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
- li r3,HID0_SPD
- andc r11,r11,r3 /* clear SPD: enable speculative */
- li r3,0
- mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */
- isync
- mtspr SPRN_HID0,r11
- sync
- isync
- blr
-
-/* 750cx specific
- * Looks like we have to disable NAP feature for some PLL settings...
- * (waiting for confirmation)
- */
-setup_750cx:
- mfspr r10, SPRN_HID1
- rlwinm r10,r10,4,28,31
- cmpwi cr0,r10,7
- cmpwi cr1,r10,9
- cmpwi cr2,r10,11
- cror 4*cr0+eq,4*cr0+eq,4*cr1+eq
- cror 4*cr0+eq,4*cr0+eq,4*cr2+eq
- bnelr
- lwz r6,CPU_SPEC_FEATURES(r5)
- li r7,CPU_FTR_CAN_NAP
- andc r6,r6,r7
- stw r6,CPU_SPEC_FEATURES(r5)
- blr
-
-/* 750fx specific
- */
-setup_750fx:
- blr
-
-/* MPC 745x
- * Enable Store Gathering (SGE), Branch Folding (FOLD)
- * Branch History Table (BHTE), Branch Target ICache (BTIC)
- * Dynamic Power Management (DPM), Speculative (SPD)
- * Ensure our data cache instructions really operate.
- * Timebase has to be running or we wouldn't have made it here,
- * just ensure we don't disable it.
- * Clear Instruction cache throttling (ICTC)
- * Enable L2 HW prefetch
- */
-setup_745x_specifics:
- /* We check for the presence of an L3 cache setup by
- * the firmware. If any, we disable NAP capability as
- * it's known to be bogus on rev 2.1 and earlier
- */
- mfspr r11,SPRN_L3CR
- andis. r11,r11,L3CR_L3E@h
- beq 1f
- lwz r6,CPU_SPEC_FEATURES(r5)
- andi. r0,r6,CPU_FTR_L3_DISABLE_NAP
- beq 1f
- li r7,CPU_FTR_CAN_NAP
- andc r6,r6,r7
- stw r6,CPU_SPEC_FEATURES(r5)
-1:
- mfspr r11,SPRN_HID0
-
- /* All of the bits we have to set.....
- */
- ori r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE
- ori r11,r11,HID0_LRSTK | HID0_BTIC
- oris r11,r11,HID0_DPM@h
-BEGIN_FTR_SECTION
- xori r11,r11,HID0_BTIC
-END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
-BEGIN_FTR_SECTION
- xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */
-END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
-
- /* All of the bits we have to clear....
- */
- li r3,HID0_SPD | HID0_NOPDST | HID0_NOPTI
- andc r11,r11,r3 /* clear SPD: enable speculative */
- li r3,0
-
- mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */
- isync
- mtspr SPRN_HID0,r11
- sync
- isync
-
- /* Enable L2 HW prefetch, if L2 is enabled
- */
- mfspr r3,SPRN_L2CR
- andis. r3,r3,L2CR_L2E@h
- beqlr
- mfspr r3,SPRN_MSSCR0
- ori r3,r3,3
- sync
- mtspr SPRN_MSSCR0,r3
- sync
- isync
- blr
-
-/*
- * Initialize the FPU registers. This is needed to work around an errata
- * in some 750 cpus where using a not yet initialized FPU register after
- * power on reset may hang the CPU
- */
-_GLOBAL(__init_fpu_registers)
- mfmsr r10
- ori r11,r10,MSR_FP
- mtmsr r11
- isync
- addis r9,r3,empty_zero_page@ha
- addi r9,r9,empty_zero_page@l
- REST_32FPRS(0,r9)
- sync
- mtmsr r10
- isync
- blr
-
-
-/* Definitions for the table use to save CPU states */
-#define CS_HID0 0
-#define CS_HID1 4
-#define CS_HID2 8
-#define CS_MSSCR0 12
-#define CS_MSSSR0 16
-#define CS_ICTRL 20
-#define CS_LDSTCR 24
-#define CS_LDSTDB 28
-#define CS_SIZE 32
-
- .data
- .balign L1_CACHE_BYTES
-cpu_state_storage:
- .space CS_SIZE
- .balign L1_CACHE_BYTES,0
- .text
-
-/* Called in normal context to backup CPU 0 state. This
- * does not include cache settings. This function is also
- * called for machine sleep. This does not include the MMU
- * setup, BATs, etc... but rather the "special" registers
- * like HID0, HID1, MSSCR0, etc...
- */
-_GLOBAL(__save_cpu_setup)
- /* Some CR fields are volatile, we back it up all */
- mfcr r7
-
- /* Get storage ptr */
- lis r5,cpu_state_storage@h
- ori r5,r5,cpu_state_storage@l
-
- /* Save HID0 (common to all CONFIG_6xx cpus) */
- mfspr r3,SPRN_HID0
- stw r3,CS_HID0(r5)
-
- /* Now deal with CPU type dependent registers */
- mfspr r3,SPRN_PVR
- srwi r3,r3,16
- cmplwi cr0,r3,0x8000 /* 7450 */
- cmplwi cr1,r3,0x000c /* 7400 */
- cmplwi cr2,r3,0x800c /* 7410 */
- cmplwi cr3,r3,0x8001 /* 7455 */
- cmplwi cr4,r3,0x8002 /* 7457 */
- cmplwi cr5,r3,0x8003 /* 7447A */
- cmplwi cr6,r3,0x7000 /* 750FX */
- cmplwi cr7,r3,0x8004 /* 7448 */
- /* cr1 is 7400 || 7410 */
- cror 4*cr1+eq,4*cr1+eq,4*cr2+eq
- /* cr0 is 74xx */
- cror 4*cr0+eq,4*cr0+eq,4*cr3+eq
- cror 4*cr0+eq,4*cr0+eq,4*cr4+eq
- cror 4*cr0+eq,4*cr0+eq,4*cr1+eq
- cror 4*cr0+eq,4*cr0+eq,4*cr5+eq
- cror 4*cr0+eq,4*cr0+eq,4*cr7+eq
- bne 1f
- /* Backup 74xx specific regs */
- mfspr r4,SPRN_MSSCR0
- stw r4,CS_MSSCR0(r5)
- mfspr r4,SPRN_MSSSR0
- stw r4,CS_MSSSR0(r5)
- beq cr1,1f
- /* Backup 745x specific registers */
- mfspr r4,SPRN_HID1
- stw r4,CS_HID1(r5)
- mfspr r4,SPRN_ICTRL
- stw r4,CS_ICTRL(r5)
- mfspr r4,SPRN_LDSTCR
- stw r4,CS_LDSTCR(r5)
- mfspr r4,SPRN_LDSTDB
- stw r4,CS_LDSTDB(r5)
-1:
- bne cr6,1f
- /* Backup 750FX specific registers */
- mfspr r4,SPRN_HID1
- stw r4,CS_HID1(r5)
- /* If rev 2.x, backup HID2 */
- mfspr r3,SPRN_PVR
- andi. r3,r3,0xff00
- cmpwi cr0,r3,0x0200
- bne 1f
- mfspr r4,SPRN_HID2
- stw r4,CS_HID2(r5)
-1:
- mtcr r7
- blr
-
-/* Called with no MMU context (typically MSR:IR/DR off) to
- * restore CPU state as backed up by the previous
- * function. This does not include cache setting
- */
-_GLOBAL(__restore_cpu_setup)
- /* Some CR fields are volatile, we back it up all */
- mfcr r7
-
- /* Get storage ptr */
- lis r5,(cpu_state_storage-KERNELBASE)@h
- ori r5,r5,cpu_state_storage@l
-
- /* Restore HID0 */
- lwz r3,CS_HID0(r5)
- sync
- isync
- mtspr SPRN_HID0,r3
- sync
- isync
-
- /* Now deal with CPU type dependent registers */
- mfspr r3,SPRN_PVR
- srwi r3,r3,16
- cmplwi cr0,r3,0x8000 /* 7450 */
- cmplwi cr1,r3,0x000c /* 7400 */
- cmplwi cr2,r3,0x800c /* 7410 */
- cmplwi cr3,r3,0x8001 /* 7455 */
- cmplwi cr4,r3,0x8002 /* 7457 */
- cmplwi cr5,r3,0x8003 /* 7447A */
- cmplwi cr6,r3,0x7000 /* 750FX */
- cmplwi cr7,r3,0x8004 /* 7448 */
- /* cr1 is 7400 || 7410 */
- cror 4*cr1+eq,4*cr1+eq,4*cr2+eq
- /* cr0 is 74xx */
- cror 4*cr0+eq,4*cr0+eq,4*cr3+eq
- cror 4*cr0+eq,4*cr0+eq,4*cr4+eq
- cror 4*cr0+eq,4*cr0+eq,4*cr1+eq
- cror 4*cr0+eq,4*cr0+eq,4*cr5+eq
- cror 4*cr0+eq,4*cr0+eq,4*cr7+eq
- bne 2f
- /* Restore 74xx specific regs */
- lwz r4,CS_MSSCR0(r5)
- sync
- mtspr SPRN_MSSCR0,r4
- sync
- isync
- lwz r4,CS_MSSSR0(r5)
- sync
- mtspr SPRN_MSSSR0,r4
- sync
- isync
- bne cr2,1f
- /* Clear 7410 L2CR2 */
- li r4,0
- mtspr SPRN_L2CR2,r4
-1: beq cr1,2f
- /* Restore 745x specific registers */
- lwz r4,CS_HID1(r5)
- sync
- mtspr SPRN_HID1,r4
- isync
- sync
- lwz r4,CS_ICTRL(r5)
- sync
- mtspr SPRN_ICTRL,r4
- isync
- sync
- lwz r4,CS_LDSTCR(r5)
- sync
- mtspr SPRN_LDSTCR,r4
- isync
- sync
- lwz r4,CS_LDSTDB(r5)
- sync
- mtspr SPRN_LDSTDB,r4
- isync
- sync
-2: bne cr6,1f
- /* Restore 750FX specific registers
- * that is restore HID2 on rev 2.x and PLL config & switch
- * to PLL 0 on all
- */
- /* If rev 2.x, restore HID2 with low voltage bit cleared */
- mfspr r3,SPRN_PVR
- andi. r3,r3,0xff00
- cmpwi cr0,r3,0x0200
- bne 4f
- lwz r4,CS_HID2(r5)
- rlwinm r4,r4,0,19,17
- mtspr SPRN_HID2,r4
- sync
-4:
- lwz r4,CS_HID1(r5)
- rlwinm r5,r4,0,16,14
- mtspr SPRN_HID1,r5
- /* Wait for PLL to stabilize */
- mftbl r5
-3: mftbl r6
- sub r6,r6,r5
- cmplwi cr0,r6,10000
- ble 3b
- /* Setup final PLL */
- mtspr SPRN_HID1,r4
-1:
- mtcr r7
- blr
-
diff --git a/arch/ppc/kernel/temp.c b/arch/ppc/kernel/temp.c
deleted file mode 100644
index 26bd8ea35a4..00000000000
--- a/arch/ppc/kernel/temp.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * temp.c Thermal management for cpu's with Thermal Assist Units
- *
- * Written by Troy Benjegerdes <hozer@drgw.net>
- *
- * TODO:
- * dynamic power management to limit peak CPU temp (using ICTC)
- * calibration???
- *
- * Silly, crazy ideas: use cpu load (from scheduler) and ICTC to extend battery
- * life in portables, and add a 'performance/watt' metric somewhere in /proc
- */
-
-#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/jiffies.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/reg.h>
-#include <asm/nvram.h>
-#include <asm/cache.h>
-#include <asm/8xx_immap.h>
-#include <asm/machdep.h>
-
-static struct tau_temp
-{
- int interrupts;
- unsigned char low;
- unsigned char high;
- unsigned char grew;
-} tau[NR_CPUS];
-
-struct timer_list tau_timer;
-
-#undef DEBUG
-
-/* TODO: put these in a /proc interface, with some sanity checks, and maybe
- * dynamic adjustment to minimize # of interrupts */
-/* configurable values for step size and how much to expand the window when
- * we get an interrupt. These are based on the limit that was out of range */
-#define step_size 2 /* step size when temp goes out of range */
-#define window_expand 1 /* expand the window by this much */
-/* configurable values for shrinking the window */
-#define shrink_timer 2*HZ /* period between shrinking the window */
-#define min_window 2 /* minimum window size, degrees C */
-
-void set_thresholds(unsigned long cpu)
-{
-#ifdef CONFIG_TAU_INT
- /*
- * setup THRM1,
- * threshold, valid bit, enable interrupts, interrupt when below threshold
- */
- mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID);
-
- /* setup THRM2,
- * threshold, valid bit, enable interrupts, interrupt when above threshhold
- */
- mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE);
-#else
- /* same thing but don't enable interrupts */
- mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TID);
- mtspr(SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V);
-#endif
-}
-
-void TAUupdate(int cpu)
-{
- unsigned thrm;
-
-#ifdef DEBUG
- printk("TAUupdate ");
-#endif
-
- /* if both thresholds are crossed, the step_sizes cancel out
- * and the window winds up getting expanded twice. */
- if((thrm = mfspr(SPRN_THRM1)) & THRM1_TIV){ /* is valid? */
- if(thrm & THRM1_TIN){ /* crossed low threshold */
- if (tau[cpu].low >= step_size){
- tau[cpu].low -= step_size;
- tau[cpu].high -= (step_size - window_expand);
- }
- tau[cpu].grew = 1;
-#ifdef DEBUG
- printk("low threshold crossed ");
-#endif
- }
- }
- if((thrm = mfspr(SPRN_THRM2)) & THRM1_TIV){ /* is valid? */
- if(thrm & THRM1_TIN){ /* crossed high threshold */
- if (tau[cpu].high <= 127-step_size){
- tau[cpu].low += (step_size - window_expand);
- tau[cpu].high += step_size;
- }
- tau[cpu].grew = 1;
-#ifdef DEBUG
- printk("high threshold crossed ");
-#endif
- }
- }
-
-#ifdef DEBUG
- printk("grew = %d\n", tau[cpu].grew);
-#endif
-
-#ifndef CONFIG_TAU_INT /* tau_timeout will do this if not using interrupts */
- set_thresholds(cpu);
-#endif
-
-}
-
-#ifdef CONFIG_TAU_INT
-/*
- * TAU interrupts - called when we have a thermal assist unit interrupt
- * with interrupts disabled
- */
-
-void TAUException(struct pt_regs * regs)
-{
- int cpu = smp_processor_id();
-
- irq_enter();
- tau[cpu].interrupts++;
-
- TAUupdate(cpu);
-
- irq_exit();
-}
-#endif /* CONFIG_TAU_INT */
-
-static void tau_timeout(void * info)
-{
- int cpu;
- unsigned long flags;
- int size;
- int shrink;
-
- /* disabling interrupts *should* be okay */
- local_irq_save(flags);
- cpu = smp_processor_id();
-
-#ifndef CONFIG_TAU_INT
- TAUupdate(cpu);
-#endif
-
- size = tau[cpu].high - tau[cpu].low;
- if (size > min_window && ! tau[cpu].grew) {
- /* do an exponential shrink of half the amount currently over size */
- shrink = (2 + size - min_window) / 4;
- if (shrink) {
- tau[cpu].low += shrink;
- tau[cpu].high -= shrink;
- } else { /* size must have been min_window + 1 */
- tau[cpu].low += 1;
-#if 1 /* debug */
- if ((tau[cpu].high - tau[cpu].low) != min_window){
- printk(KERN_ERR "temp.c: line %d, logic error\n", __LINE__);
- }
-#endif
- }
- }
-
- tau[cpu].grew = 0;
-
- set_thresholds(cpu);
-
- /*
- * Do the enable every time, since otherwise a bunch of (relatively)
- * complex sleep code needs to be added. One mtspr every time
- * tau_timeout is called is probably not a big deal.
- *
- * Enable thermal sensor and set up sample interval timer
- * need 20 us to do the compare.. until a nice 'cpu_speed' function
- * call is implemented, just assume a 500 mhz clock. It doesn't really
- * matter if we take too long for a compare since it's all interrupt
- * driven anyway.
- *
- * use a extra long time.. (60 us @ 500 mhz)
- */
- mtspr(SPRN_THRM3, THRM3_SITV(500*60) | THRM3_E);
-
- local_irq_restore(flags);
-}
-
-static void tau_timeout_smp(unsigned long unused)
-{
-
- /* schedule ourselves to be run again */
- mod_timer(&tau_timer, jiffies + shrink_timer) ;
- on_each_cpu(tau_timeout, NULL, 1, 0);
-}
-
-/*
- * setup the TAU
- *
- * Set things up to use THRM1 as a temperature lower bound, and THRM2 as an upper bound.
- * Start off at zero
- */
-
-int tau_initialized = 0;
-
-void __init TAU_init_smp(void * info)
-{
- unsigned long cpu = smp_processor_id();
-
- /* set these to a reasonable value and let the timer shrink the
- * window */
- tau[cpu].low = 5;
- tau[cpu].high = 120;
-
- set_thresholds(cpu);
-}
-
-int __init TAU_init(void)
-{
- /* We assume in SMP that if one CPU has TAU support, they
- * all have it --BenH
- */
- if (!cpu_has_feature(CPU_FTR_TAU)) {
- printk("Thermal assist unit not available\n");
- tau_initialized = 0;
- return 1;
- }
-
-
- /* first, set up the window shrinking timer */
- init_timer(&tau_timer);
- tau_timer.function = tau_timeout_smp;
- tau_timer.expires = jiffies + shrink_timer;
- add_timer(&tau_timer);
-
- on_each_cpu(TAU_init_smp, NULL, 1, 0);
-
- printk("Thermal assist unit ");
-#ifdef CONFIG_TAU_INT
- printk("using interrupts, ");
-#else
- printk("using timers, ");
-#endif
- printk("shrink_timer: %d jiffies\n", shrink_timer);
- tau_initialized = 1;
-
- return 0;
-}
-
-__initcall(TAU_init);
-
-/*
- * return current temp
- */
-
-u32 cpu_temp_both(unsigned long cpu)
-{
- return ((tau[cpu].high << 16) | tau[cpu].low);
-}
-
-int cpu_temp(unsigned long cpu)
-{
- return ((tau[cpu].high + tau[cpu].low) / 2);
-}
-
-int tau_interrupts(unsigned long cpu)
-{
- return (tau[cpu].interrupts);
-}