aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/boards/mach-se/7751
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/mach-se/7751')
-rw-r--r--arch/sh/boards/mach-se/7751/Makefile2
-rw-r--r--arch/sh/boards/mach-se/7751/io.c16
-rw-r--r--arch/sh/boards/mach-se/7751/pci.c147
3 files changed, 0 insertions, 165 deletions
diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
index dbc29f3a9de..e6f4341bfe6 100644
--- a/arch/sh/boards/mach-se/7751/Makefile
+++ b/arch/sh/boards/mach-se/7751/Makefile
@@ -3,5 +3,3 @@
#
obj-y := setup.o io.o irq.o
-
-obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c
index 6287ae57031..6e75bd4459e 100644
--- a/arch/sh/boards/mach-se/7751/io.c
+++ b/arch/sh/boards/mach-se/7751/io.c
@@ -34,8 +34,6 @@ unsigned char sh7751se_inb(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned char *)pci_ioaddr(port);
else
return (*port2adr(port)) & 0xff;
}
@@ -46,8 +44,6 @@ unsigned char sh7751se_inb_p(unsigned long port)
if (PXSEG(port))
v = *(volatile unsigned char *)port;
- else if (is_pci_ioaddr(port))
- v = *(volatile unsigned char *)pci_ioaddr(port);
else
v = (*port2adr(port)) & 0xff;
ctrl_delay();
@@ -58,8 +54,6 @@ unsigned short sh7751se_inw(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
@@ -71,8 +65,6 @@ unsigned int sh7751se_inl(unsigned long port)
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
@@ -85,8 +77,6 @@ void sh7751se_outb(unsigned char value, unsigned long port)
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
}
@@ -95,8 +85,6 @@ void sh7751se_outb_p(unsigned char value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
ctrl_delay();
@@ -106,8 +94,6 @@ void sh7751se_outw(unsigned short value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else
@@ -118,8 +104,6 @@ void sh7751se_outl(unsigned int value, unsigned long port)
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned long*)pci_ioaddr(port)) = value;
else
maybebadio(port);
}
diff --git a/arch/sh/boards/mach-se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c
deleted file mode 100644
index 203b2923fe7..00000000000
--- a/arch/sh/boards/mach-se/7751/pci.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7751/pci.c
- *
- * Author: Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the Hitachi SH7751 Solution Engine board (MS7751SE01)
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
-#include <asm/io.h>
-#include "../../../drivers/pci/pci-sh7751.h"
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-/*
- * Only long word accesses of the PCIC's internal local registers and the
- * configuration registers from the CPU is supported.
- */
-#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
-#define PCIC_READ(x) readl(PCI_REG(x))
-
-/*
- * Description: This function sets up and initializes the pcic, sets
- * up the BARS, maps the DRAM into the address space etc, etc.
- */
-int __init pcibios_init_platform(void)
-{
- unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
- unsigned short bcr2;
-
- /*
- * Initialize the slave bus controller on the pcic. The values used
- * here should not be hardcoded, but they should be taken from the bsc
- * on the processor, to make this function as generic as possible.
- * (i.e. Another sbc may usr different SDRAM timing settings -- in order
- * for the pcic to work, its settings need to be exactly the same.)
- */
- bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
- bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
- wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
- wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
- wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
- mcr = (*(volatile unsigned long*)(SH7751_MCR));
-
- bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
- (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
-
- bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
- PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
- PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
- PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
- PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
-
-
- /* Enable all interrupts, so we know what to fix */
- PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
- PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
-
- /* Set up standard PCI config registers */
- PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */
- PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
- PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
- PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
- PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
- PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
- PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
- PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
- PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
- PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
-
- /* Now turn it on... */
- PCIC_WRITE(SH7751_PCICR, 0xa5000001);
-
- /*
- * Set PCIMBR and PCIIOBR here, assuming a single window
- * (16M MEM, 256K IO) is enough. If a larger space is
- * needed, the readx/writex and inx/outx functions will
- * have to do more (e.g. setting registers for each call).
- */
-
- /*
- * Set the MBR so PCI address is one-to-one with window,
- * meaning all calls go straight through... use BUG_ON to
- * catch erroneous assumption.
- */
- BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE);
-
- PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM);
-
- /* Set IOBR for window containing area specified in pci.h */
- PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK));
-
- /* All done, may as well say so... */
- printk("SH7751 PCI: Finished initialization of the PCI controller\n");
-
- return 1;
-}
-
-int __init pcibios_map_platform_irq(u8 slot, u8 pin)
-{
- switch (slot) {
- case 0: return 13;
- case 1: return 13; /* AMD Ethernet controller */
- case 2: return -1;
- case 3: return -1;
- case 4: return -1;
- default:
- printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
- return -1;
- }
-}
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751 IO",
- .start = SH7751_PCI_IO_BASE,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751 mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-