aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/boards/se/7206
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/se/7206')
-rw-r--r--arch/sh/boards/se/7206/Makefile5
-rw-r--r--arch/sh/boards/se/7206/io.c104
-rw-r--r--arch/sh/boards/se/7206/irq.c146
-rw-r--r--arch/sh/boards/se/7206/setup.c108
4 files changed, 0 insertions, 363 deletions
diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/se/7206/Makefile
deleted file mode 100644
index 63e7ed699f3..00000000000
--- a/arch/sh/boards/se/7206/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the 7206 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o io.o irq.o
diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/se/7206/io.c
deleted file mode 100644
index 1308e618e04..00000000000
--- a/arch/sh/boards/se/7206/io.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
- *
- * linux/arch/sh/boards/se/7206/io.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * I/O routine for Hitachi 7206 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/se7206.h>
-
-
-static inline void delay(void)
-{
- ctrl_inw(0x20000000); /* P2 ROM Area */
-}
-
-/* MS7750 requires special versions of in*, out* routines, since
- PC-like io ports are located at upper half byte of 16-bit word which
- can be accessed only with 16-bit wide. */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
- if (port >= 0x2000 && port < 0x2020)
- return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
- else if (port >= 0x300 && port < 0x310)
- return (volatile __u16 *) (PA_SMSC + (port - 0x300));
-
- return (volatile __u16 *)port;
-}
-
-unsigned char se7206_inb(unsigned long port)
-{
- return (*port2adr(port)) & 0xff;
-}
-
-unsigned char se7206_inb_p(unsigned long port)
-{
- unsigned long v;
-
- v = (*port2adr(port)) & 0xff;
- delay();
- return v;
-}
-
-unsigned short se7206_inw(unsigned long port)
-{
- return *port2adr(port);;
-}
-
-void se7206_outb(unsigned char value, unsigned long port)
-{
- *(port2adr(port)) = value;
-}
-
-void se7206_outb_p(unsigned char value, unsigned long port)
-{
- *(port2adr(port)) = value;
- delay();
-}
-
-void se7206_outw(unsigned short value, unsigned long port)
-{
- *port2adr(port) = value;
-}
-
-void se7206_insb(unsigned long port, void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- __u8 *ap = addr;
-
- while (count--)
- *ap++ = *p;
-}
-
-void se7206_insw(unsigned long port, void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- __u16 *ap = addr;
- while (count--)
- *ap++ = *p;
-}
-
-void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- const __u8 *ap = addr;
-
- while (count--)
- *p = *ap++;
-}
-
-void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- const __u16 *ap = addr;
- while (count--)
- *p = *ap++;
-}
diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/se/7206/irq.c
deleted file mode 100644
index 9d5bfc77d0d..00000000000
--- a/arch/sh/boards/se/7206/irq.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7206/irq.c
- *
- * Copyright (C) 2005,2006 Yoshinori Sato
- *
- * Hitachi SolutionEngine Support.
- *
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <asm/se7206.h>
-
-#define INTSTS0 0x31800000
-#define INTSTS1 0x31800002
-#define INTMSK0 0x31800004
-#define INTMSK1 0x31800006
-#define INTSEL 0x31800008
-
-#define IRQ0_IRQ 64
-#define IRQ1_IRQ 65
-#define IRQ3_IRQ 67
-
-#define INTC_IPR01 0xfffe0818
-#define INTC_ICR1 0xfffe0802
-
-static void disable_se7206_irq(unsigned int irq)
-{
- unsigned short val;
- unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
- unsigned short msk0,msk1;
-
- /* Set the priority in IPR to 0 */
- val = ctrl_inw(INTC_IPR01);
- val &= mask;
- ctrl_outw(val, INTC_IPR01);
- /* FPGA mask set */
- msk0 = ctrl_inw(INTMSK0);
- msk1 = ctrl_inw(INTMSK1);
-
- switch (irq) {
- case IRQ0_IRQ:
- msk0 |= 0x0010;
- break;
- case IRQ1_IRQ:
- msk0 |= 0x000f;
- break;
- case IRQ3_IRQ:
- msk0 |= 0x0f00;
- msk1 |= 0x00ff;
- break;
- }
- ctrl_outw(msk0, INTMSK0);
- ctrl_outw(msk1, INTMSK1);
-}
-
-static void enable_se7206_irq(unsigned int irq)
-{
- unsigned short val;
- unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
- unsigned short msk0,msk1;
-
- /* Set priority in IPR back to original value */
- val = ctrl_inw(INTC_IPR01);
- val |= value;
- ctrl_outw(val, INTC_IPR01);
-
- /* FPGA mask reset */
- msk0 = ctrl_inw(INTMSK0);
- msk1 = ctrl_inw(INTMSK1);
-
- switch (irq) {
- case IRQ0_IRQ:
- msk0 &= ~0x0010;
- break;
- case IRQ1_IRQ:
- msk0 &= ~0x000f;
- break;
- case IRQ3_IRQ:
- msk0 &= ~0x0f00;
- msk1 &= ~0x00ff;
- break;
- }
- ctrl_outw(msk0, INTMSK0);
- ctrl_outw(msk1, INTMSK1);
-}
-
-static void eoi_se7206_irq(unsigned int irq)
-{
- unsigned short sts0,sts1;
-
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_se7206_irq(irq);
- /* FPGA isr clear */
- sts0 = ctrl_inw(INTSTS0);
- sts1 = ctrl_inw(INTSTS1);
-
- switch (irq) {
- case IRQ0_IRQ:
- sts0 &= ~0x0010;
- break;
- case IRQ1_IRQ:
- sts0 &= ~0x000f;
- break;
- case IRQ3_IRQ:
- sts0 &= ~0x0f00;
- sts1 &= ~0x00ff;
- break;
- }
- ctrl_outw(sts0, INTSTS0);
- ctrl_outw(sts1, INTSTS1);
-}
-
-static struct irq_chip se7206_irq_chip __read_mostly = {
- .name = "SE7206-FPGA",
- .mask = disable_se7206_irq,
- .unmask = enable_se7206_irq,
- .mask_ack = disable_se7206_irq,
- .eoi = eoi_se7206_irq,
-};
-
-static void make_se7206_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- set_irq_chip_and_handler_name(irq, &se7206_irq_chip,
- handle_level_irq, "level");
- disable_se7206_irq(irq);
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7206_IRQ(void)
-{
- make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
- make_se7206_irq(IRQ1_IRQ); /* ATA */
- make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
- ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
-
- /* FPGA System register setup*/
- ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
- ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
- /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
- ctrl_outw(0x0001,INTSEL);
-}
diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c
deleted file mode 100644
index 4fe84cc0840..00000000000
--- a/arch/sh/boards/se/7206/setup.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *
- * linux/arch/sh/boards/se/7206/setup.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- * Copyright (C) 2007 - 2008 Paul Mundt
- *
- * Hitachi 7206 SolutionEngine Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <asm/se7206.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/heartbeat.h>
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .name = "smc91x-regs",
- .start = PA_SMSC + 0x300,
- .end = PA_SMSC + 0x300 + 0x020 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 64,
- .end = 64,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT,
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &smc91x_info,
- },
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
- .regsize = 32,
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct platform_device *se7206_devices[] __initdata = {
- &smc91x_device,
- &heartbeat_device,
-};
-
-static int __init se7206_devices_setup(void)
-{
- return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
-}
-__initcall(se7206_devices_setup);
-
-/*
- * The Machine Vector
- */
-
-static struct sh_machine_vector mv_se __initmv = {
- .mv_name = "SolutionEngine",
- .mv_nr_irqs = 256,
- .mv_inb = se7206_inb,
- .mv_inw = se7206_inw,
- .mv_outb = se7206_outb,
- .mv_outw = se7206_outw,
-
- .mv_inb_p = se7206_inb_p,
- .mv_inw_p = se7206_inw,
- .mv_outb_p = se7206_outb_p,
- .mv_outw_p = se7206_outw,
-
- .mv_insb = se7206_insb,
- .mv_insw = se7206_insw,
- .mv_outsb = se7206_outsb,
- .mv_outsw = se7206_outsw,
-
- .mv_init_irq = init_se7206_IRQ,
-};
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 23:27:42 +0000