aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/boards/se/7751
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/se/7751')
-rw-r--r--arch/sh/boards/se/7751/Makefile7
-rw-r--r--arch/sh/boards/se/7751/io.c135
-rw-r--r--arch/sh/boards/se/7751/irq.c50
-rw-r--r--arch/sh/boards/se/7751/pci.c147
-rw-r--r--arch/sh/boards/se/7751/setup.c78
5 files changed, 0 insertions, 417 deletions
diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/se/7751/Makefile
deleted file mode 100644
index dbc29f3a9de..00000000000
--- a/arch/sh/boards/se/7751/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the 7751 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o io.o irq.o
-
-obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/se/7751/io.c
deleted file mode 100644
index e8d846cec89..00000000000
--- a/arch/sh/boards/se/7751/io.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/se7751.h>
-#include <asm/addrspace.h>
-
-static inline volatile u16 *port2adr(unsigned int port)
-{
- if (port >= 0x2000)
- return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
- maybebadio((unsigned long)port);
- return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window. Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used w/o translation for
- * compatibility.
- */
-unsigned char sh7751se_inb(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned char *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned char *)pci_ioaddr(port);
- else
- return (*port2adr(port)) & 0xff;
-}
-
-unsigned char sh7751se_inb_p(unsigned long port)
-{
- unsigned char v;
-
- if (PXSEG(port))
- v = *(volatile unsigned char *)port;
- else if (is_pci_ioaddr(port))
- v = *(volatile unsigned char *)pci_ioaddr(port);
- else
- v = (*port2adr(port)) & 0xff;
- ctrl_delay();
- return v;
-}
-
-unsigned short sh7751se_inw(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned short *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned short *)pci_ioaddr(port);
- else if (port >= 0x2000)
- return *port2adr(port);
- else
- maybebadio(port);
- return 0;
-}
-
-unsigned int sh7751se_inl(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned long *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned int *)pci_ioaddr(port);
- else if (port >= 0x2000)
- return *port2adr(port);
- else
- maybebadio(port);
- return 0;
-}
-
-void sh7751se_outb(unsigned char value, unsigned long port)
-{
-
- if (PXSEG(port))
- *(volatile unsigned char *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned char*)pci_ioaddr(port)) = value;
- else
- *(port2adr(port)) = value;
-}
-
-void sh7751se_outb_p(unsigned char value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned char *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned char*)pci_ioaddr(port)) = value;
- else
- *(port2adr(port)) = value;
- ctrl_delay();
-}
-
-void sh7751se_outw(unsigned short value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned short *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned short *)pci_ioaddr(port)) = value;
- else if (port >= 0x2000)
- *port2adr(port) = value;
- else
- maybebadio(port);
-}
-
-void sh7751se_outl(unsigned int value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned long *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned long*)pci_ioaddr(port)) = value;
- else
- maybebadio(port);
-}
-
-void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
-{
- maybebadio(port);
-}
-
-void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- maybebadio(port);
-}
diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c
deleted file mode 100644
index c3d12590e5d..00000000000
--- a/arch/sh/boards/se/7751/irq.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7751/irq.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/se7751.h>
-
-static struct ipr_data ipr_irq_table[] = {
- { 13, 3, 3, 2 },
- /* Add additional entries here as drivers are added and tested. */
-};
-
-static unsigned long ipr_offsets[] = {
- BCR_ILCRA,
- BCR_ILCRB,
- BCR_ILCRC,
- BCR_ILCRD,
- BCR_ILCRE,
- BCR_ILCRF,
- BCR_ILCRG,
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
-
- .chip = {
- .name = "IPR-se7751",
- },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_7751se_IRQ(void)
-{
- register_ipr_controller(&ipr_irq_desc);
-}
diff --git a/arch/sh/boards/se/7751/pci.c b/arch/sh/boards/se/7751/pci.c
deleted file mode 100644
index 203b2923fe7..00000000000
--- a/arch/sh/boards/se/7751/pci.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7751/pci.c
- *
- * Author: Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the Hitachi SH7751 Solution Engine board (MS7751SE01)
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
-#include <asm/io.h>
-#include "../../../drivers/pci/pci-sh7751.h"
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-/*
- * Only long word accesses of the PCIC's internal local registers and the
- * configuration registers from the CPU is supported.
- */
-#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
-#define PCIC_READ(x) readl(PCI_REG(x))
-
-/*
- * Description: This function sets up and initializes the pcic, sets
- * up the BARS, maps the DRAM into the address space etc, etc.
- */
-int __init pcibios_init_platform(void)
-{
- unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
- unsigned short bcr2;
-
- /*
- * Initialize the slave bus controller on the pcic. The values used
- * here should not be hardcoded, but they should be taken from the bsc
- * on the processor, to make this function as generic as possible.
- * (i.e. Another sbc may usr different SDRAM timing settings -- in order
- * for the pcic to work, its settings need to be exactly the same.)
- */
- bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
- bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
- wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
- wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
- wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
- mcr = (*(volatile unsigned long*)(SH7751_MCR));
-
- bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
- (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
-
- bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
- PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
- PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
- PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
- PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
-
-
- /* Enable all interrupts, so we know what to fix */
- PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
- PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
-
- /* Set up standard PCI config registers */
- PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */
- PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
- PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
- PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
- PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
- PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
- PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
- PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
- PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
- PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
-
- /* Now turn it on... */
- PCIC_WRITE(SH7751_PCICR, 0xa5000001);
-
- /*
- * Set PCIMBR and PCIIOBR here, assuming a single window
- * (16M MEM, 256K IO) is enough. If a larger space is
- * needed, the readx/writex and inx/outx functions will
- * have to do more (e.g. setting registers for each call).
- */
-
- /*
- * Set the MBR so PCI address is one-to-one with window,
- * meaning all calls go straight through... use BUG_ON to
- * catch erroneous assumption.
- */
- BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE);
-
- PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM);
-
- /* Set IOBR for window containing area specified in pci.h */
- PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK));
-
- /* All done, may as well say so... */
- printk("SH7751 PCI: Finished initialization of the PCI controller\n");
-
- return 1;
-}
-
-int __init pcibios_map_platform_irq(u8 slot, u8 pin)
-{
- switch (slot) {
- case 0: return 13;
- case 1: return 13; /* AMD Ethernet controller */
- case 2: return -1;
- case 3: return -1;
- case 4: return -1;
- default:
- printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
- return -1;
- }
-}
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751 IO",
- .start = SH7751_PCI_IO_BASE,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751 mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
deleted file mode 100644
index deefbfd9259..00000000000
--- a/arch/sh/boards/se/7751/setup.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7751/setup.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se7751.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
- .bit_pos = heartbeat_bit_pos,
- .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct platform_device *se7751_devices[] __initdata = {
- &heartbeat_device,
-};
-
-static int __init se7751_devices_setup(void)
-{
- return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
-}
-__initcall(se7751_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7751se __initmv = {
- .mv_name = "7751 SolutionEngine",
- .mv_nr_irqs = 72,
-
- .mv_inb = sh7751se_inb,
- .mv_inw = sh7751se_inw,
- .mv_inl = sh7751se_inl,
- .mv_outb = sh7751se_outb,
- .mv_outw = sh7751se_outw,
- .mv_outl = sh7751se_outl,
-
- .mv_inb_p = sh7751se_inb_p,
- .mv_inw_p = sh7751se_inw,
- .mv_inl_p = sh7751se_inl,
- .mv_outb_p = sh7751se_outb_p,
- .mv_outw_p = sh7751se_outw,
- .mv_outl_p = sh7751se_outl,
-
- .mv_insl = sh7751se_insl,
- .mv_outsl = sh7751se_outsl,
-
- .mv_init_irq = init_7751se_IRQ,
-};
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 02:30:05 +0000