diff options
Diffstat (limited to 'arch/sh/boards')
| -rw-r--r-- | arch/sh/boards/board-urquell.c | 7 | ||||
| -rw-r--r-- | arch/sh/boards/mach-highlander/setup.c | 52 | ||||
| -rw-r--r-- | arch/sh/boards/mach-rsk/devices-rsk7203.c | 8 | ||||
| -rw-r--r-- | arch/sh/boards/mach-se/7780/irq.c | 1 |
4 files changed, 64 insertions, 4 deletions
diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c index beb88c4da2c..36b8bac9b12 100644 --- a/arch/sh/boards/board-urquell.c +++ b/arch/sh/boards/board-urquell.c @@ -2,6 +2,7 @@ * Renesas Technology Corp. SH7786 Urquell Support. * * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com> + * Copyright (C) 2009 Paul Mundt * * Based on board-sh7785lcr.c * Copyright (C) 2008 Yoshihiro Shimoda @@ -178,6 +179,11 @@ static void __init urquell_init_irq(void) plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK); } +static int urquell_mode_pins(void) +{ + return __raw_readw(UBOARDREG(MDSWMR)); +} + /* Initialize the board */ static void __init urquell_setup(char **cmdline_p) { @@ -193,4 +199,5 @@ static struct sh_machine_vector mv_urquell __initmv = { .mv_name = "Urquell", .mv_setup = urquell_setup, .mv_init_irq = urquell_init_irq, + .mv_mode_pins = urquell_mode_pins, }; diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c index 920ea76abac..1639f891500 100644 --- a/arch/sh/boards/mach-highlander/setup.c +++ b/arch/sh/boards/mach-highlander/setup.c @@ -17,6 +17,7 @@ #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/types.h> +#include <linux/mtd/physmap.h> #include <linux/i2c.h> #include <linux/irq.h> #include <linux/interrupt.h> @@ -184,6 +185,53 @@ static struct platform_device ax88796_device = { .resource = ax88796_resources, }; +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 512 * 1024, + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 4 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 4, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +/* This config is flash board for mass production. */ +static struct resource nor_flash_resources[] = { + [0] = { + .start = PA_NORFLASH_ADDR, + .end = PA_NORFLASH_ADDR + PA_NORFLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + static struct resource smbus_resources[] = { [0] = { .start = PA_SMCR, @@ -215,6 +263,7 @@ static struct platform_device *r7780rp_devices[] __initdata = { &m66592_usb_peripheral_device, &heartbeat_device, &smbus_device, + &nor_flash_device, #ifndef CONFIG_SH_R7780RP &ax88796_device, #endif @@ -253,9 +302,10 @@ device_initcall(r7780rp_devices_setup); /* * Platform specific clocks */ -static void ivdr_clk_enable(struct clk *clk) +static int ivdr_clk_enable(struct clk *clk) { ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL); + return 0; } static void ivdr_clk_disable(struct clk *clk) diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c index d8a65ea9166..4af3a771c05 100644 --- a/arch/sh/boards/mach-rsk/devices-rsk7203.c +++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c @@ -26,13 +26,13 @@ static struct smsc911x_platform_config smsc911x_config = { .phy_interface = PHY_INTERFACE_MODE_MII, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_16BIT, + .flags = SMSC911X_USE_32BIT | SMSC911X_SWAP_FIFO, }; static struct resource smsc911x_resources[] = { [0] = { .start = 0x24000000, - .end = 0x24000000 + 0x100, + .end = 0x240000ff, .flags = IORESOURCE_MEM, }, [1] = { @@ -99,6 +99,10 @@ static int __init rsk7203_devices_setup(void) gpio_request(GPIO_FN_TXD0, NULL); gpio_request(GPIO_FN_RXD0, NULL); + /* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */ + ctrl_outl(0x36db0400, 0xfffc0008); /* CS1BCR */ + gpio_request(GPIO_FN_IRQ0_PB, NULL); + return platform_add_devices(rsk7203_devices, ARRAY_SIZE(rsk7203_devices)); } diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c index b8d43b638fc..121744c0871 100644 --- a/arch/sh/boards/mach-se/7780/irq.c +++ b/arch/sh/boards/mach-se/7780/irq.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/irq.h> #include <linux/io.h> #include <mach-se/mach/se7780.h> |