diff options
Diffstat (limited to 'arch/sparc64/kernel/spiterrs.S')
| -rw-r--r-- | arch/sparc64/kernel/spiterrs.S | 245 |
1 files changed, 0 insertions, 245 deletions
diff --git a/arch/sparc64/kernel/spiterrs.S b/arch/sparc64/kernel/spiterrs.S deleted file mode 100644 index c357e40ffd0..00000000000 --- a/arch/sparc64/kernel/spiterrs.S +++ /dev/null @@ -1,245 +0,0 @@ - /* We need to carefully read the error status, ACK the errors, - * prevent recursive traps, and pass the information on to C - * code for logging. - * - * We pass the AFAR in as-is, and we encode the status - * information as described in asm-sparc64/sfafsr.h - */ - .type __spitfire_access_error,#function -__spitfire_access_error: - /* Disable ESTATE error reporting so that we do not take - * recursive traps and RED state the processor. - */ - stxa %g0, [%g0] ASI_ESTATE_ERROR_EN - membar #Sync - - mov UDBE_UE, %g1 - ldxa [%g0] ASI_AFSR, %g4 ! Get AFSR - - /* __spitfire_cee_trap branches here with AFSR in %g4 and - * UDBE_CE in %g1. It only clears ESTATE_ERR_CE in the ESTATE - * Error Enable register. - */ -__spitfire_cee_trap_continue: - ldxa [%g0] ASI_AFAR, %g5 ! Get AFAR - - rdpr %tt, %g3 - and %g3, 0x1ff, %g3 ! Paranoia - sllx %g3, SFSTAT_TRAP_TYPE_SHIFT, %g3 - or %g4, %g3, %g4 - rdpr %tl, %g3 - cmp %g3, 1 - mov 1, %g3 - bleu %xcc, 1f - sllx %g3, SFSTAT_TL_GT_ONE_SHIFT, %g3 - - or %g4, %g3, %g4 - - /* Read in the UDB error register state, clearing the sticky - * error bits as-needed. We only clear them if the UE bit is - * set. Likewise, __spitfire_cee_trap below will only do so - * if the CE bit is set. - * - * NOTE: UltraSparc-I/II have high and low UDB error - * registers, corresponding to the two UDB units - * present on those chips. UltraSparc-IIi only - * has a single UDB, called "SDB" in the manual. - * For IIi the upper UDB register always reads - * as zero so for our purposes things will just - * work with the checks below. - */ -1: ldxa [%g0] ASI_UDBH_ERROR_R, %g3 - and %g3, 0x3ff, %g7 ! Paranoia - sllx %g7, SFSTAT_UDBH_SHIFT, %g7 - or %g4, %g7, %g4 - andcc %g3, %g1, %g3 ! UDBE_UE or UDBE_CE - be,pn %xcc, 1f - nop - stxa %g3, [%g0] ASI_UDB_ERROR_W - membar #Sync - -1: mov 0x18, %g3 - ldxa [%g3] ASI_UDBL_ERROR_R, %g3 - and %g3, 0x3ff, %g7 ! Paranoia - sllx %g7, SFSTAT_UDBL_SHIFT, %g7 - or %g4, %g7, %g4 - andcc %g3, %g1, %g3 ! UDBE_UE or UDBE_CE - be,pn %xcc, 1f - nop - mov 0x18, %g7 - stxa %g3, [%g7] ASI_UDB_ERROR_W - membar #Sync - -1: /* Ok, now that we've latched the error state, clear the - * sticky bits in the AFSR. - */ - stxa %g4, [%g0] ASI_AFSR - membar #Sync - - rdpr %tl, %g2 - cmp %g2, 1 - rdpr %pil, %g2 - bleu,pt %xcc, 1f - wrpr %g0, PIL_NORMAL_MAX, %pil - - ba,pt %xcc, etraptl1 - rd %pc, %g7 - - ba,pt %xcc, 2f - nop - -1: ba,pt %xcc, etrap_irq - rd %pc, %g7 - -2: -#ifdef CONFIG_TRACE_IRQFLAGS - call trace_hardirqs_off - nop -#endif - mov %l4, %o1 - mov %l5, %o2 - call spitfire_access_error - add %sp, PTREGS_OFF, %o0 - ba,pt %xcc, rtrap - nop - .size __spitfire_access_error,.-__spitfire_access_error - - /* This is the trap handler entry point for ECC correctable - * errors. They are corrected, but we listen for the trap so - * that the event can be logged. - * - * Disrupting errors are either: - * 1) single-bit ECC errors during UDB reads to system - * memory - * 2) data parity errors during write-back events - * - * As far as I can make out from the manual, the CEE trap is - * only for correctable errors during memory read accesses by - * the front-end of the processor. - * - * The code below is only for trap level 1 CEE events, as it - * is the only situation where we can safely record and log. - * For trap level >1 we just clear the CE bit in the AFSR and - * return. - * - * This is just like __spiftire_access_error above, but it - * specifically handles correctable errors. If an - * uncorrectable error is indicated in the AFSR we will branch - * directly above to __spitfire_access_error to handle it - * instead. Uncorrectable therefore takes priority over - * correctable, and the error logging C code will notice this - * case by inspecting the trap type. - */ - .type __spitfire_cee_trap,#function -__spitfire_cee_trap: - ldxa [%g0] ASI_AFSR, %g4 ! Get AFSR - mov 1, %g3 - sllx %g3, SFAFSR_UE_SHIFT, %g3 - andcc %g4, %g3, %g0 ! Check for UE - bne,pn %xcc, __spitfire_access_error - nop - - /* Ok, in this case we only have a correctable error. - * Indicate we only wish to capture that state in register - * %g1, and we only disable CE error reporting unlike UE - * handling which disables all errors. - */ - ldxa [%g0] ASI_ESTATE_ERROR_EN, %g3 - andn %g3, ESTATE_ERR_CE, %g3 - stxa %g3, [%g0] ASI_ESTATE_ERROR_EN - membar #Sync - - /* Preserve AFSR in %g4, indicate UDB state to capture in %g1 */ - ba,pt %xcc, __spitfire_cee_trap_continue - mov UDBE_CE, %g1 - .size __spitfire_cee_trap,.-__spitfire_cee_trap - - .type __spitfire_data_access_exception_tl1,#function -__spitfire_data_access_exception_tl1: - rdpr %pstate, %g4 - wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate - mov TLB_SFSR, %g3 - mov DMMU_SFAR, %g5 - ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR - ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR - stxa %g0, [%g3] ASI_DMMU ! Clear SFSR.FaultValid bit - membar #Sync - rdpr %tt, %g3 - cmp %g3, 0x80 ! first win spill/fill trap - blu,pn %xcc, 1f - cmp %g3, 0xff ! last win spill/fill trap - bgu,pn %xcc, 1f - nop - ba,pt %xcc, winfix_dax - rdpr %tpc, %g3 -1: sethi %hi(109f), %g7 - ba,pt %xcc, etraptl1 -109: or %g7, %lo(109b), %g7 - mov %l4, %o1 - mov %l5, %o2 - call spitfire_data_access_exception_tl1 - add %sp, PTREGS_OFF, %o0 - ba,pt %xcc, rtrap - nop - .size __spitfire_data_access_exception_tl1,.-__spitfire_data_access_exception_tl1 - - .type __spitfire_data_access_exception,#function -__spitfire_data_access_exception: - rdpr %pstate, %g4 - wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate - mov TLB_SFSR, %g3 - mov DMMU_SFAR, %g5 - ldxa [%g3] ASI_DMMU, %g4 ! Get SFSR - ldxa [%g5] ASI_DMMU, %g5 ! Get SFAR - stxa %g0, [%g3] ASI_DMMU ! Clear SFSR.FaultValid bit - membar #Sync - sethi %hi(109f), %g7 - ba,pt %xcc, etrap -109: or %g7, %lo(109b), %g7 - mov %l4, %o1 - mov %l5, %o2 - call spitfire_data_access_exception - add %sp, PTREGS_OFF, %o0 - ba,pt %xcc, rtrap - nop - .size __spitfire_data_access_exception,.-__spitfire_data_access_exception - - .type __spitfire_insn_access_exception_tl1,#function -__spitfire_insn_access_exception_tl1: - rdpr %pstate, %g4 - wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate - mov TLB_SFSR, %g3 - ldxa [%g3] ASI_IMMU, %g4 ! Get SFSR - rdpr %tpc, %g5 ! IMMU has no SFAR, use TPC - stxa %g0, [%g3] ASI_IMMU ! Clear FaultValid bit - membar #Sync - sethi %hi(109f), %g7 - ba,pt %xcc, etraptl1 -109: or %g7, %lo(109b), %g7 - mov %l4, %o1 - mov %l5, %o2 - call spitfire_insn_access_exception_tl1 - add %sp, PTREGS_OFF, %o0 - ba,pt %xcc, rtrap - nop - .size __spitfire_insn_access_exception_tl1,.-__spitfire_insn_access_exception_tl1 - - .type __spitfire_insn_access_exception,#function -__spitfire_insn_access_exception: - rdpr %pstate, %g4 - wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate - mov TLB_SFSR, %g3 - ldxa [%g3] ASI_IMMU, %g4 ! Get SFSR - rdpr %tpc, %g5 ! IMMU has no SFAR, use TPC - stxa %g0, [%g3] ASI_IMMU ! Clear FaultValid bit - membar #Sync - sethi %hi(109f), %g7 - ba,pt %xcc, etrap -109: or %g7, %lo(109b), %g7 - mov %l4, %o1 - mov %l5, %o2 - call spitfire_insn_access_exception - add %sp, PTREGS_OFF, %o0 - ba,pt %xcc, rtrap - nop - .size __spitfire_insn_access_exception,.-__spitfire_insn_access_exception |