diff options
Diffstat (limited to 'arch/x86/Kconfig')
| -rw-r--r-- | arch/x86/Kconfig | 217 |
1 files changed, 162 insertions, 55 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index ed92864d132..5b9b12321ad 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -18,6 +18,7 @@ config X86_64 ### Arch settings config X86 def_bool y + select HAVE_AOUT if X86_32 select HAVE_UNSTABLE_SCHED_CLOCK select HAVE_IDE select HAVE_OPROFILE @@ -25,10 +26,12 @@ config X86 select HAVE_KPROBES select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_KRETPROBES + select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64) select HAVE_ARCH_KGDB if !X86_VOYAGER + select HAVE_ARCH_TRACEHOOK select HAVE_GENERIC_DMA_COHERENT if X86_32 select HAVE_EFFICIENT_UNALIGNED_ACCESS @@ -37,10 +40,6 @@ config ARCH_DEFCONFIG default "arch/x86/configs/i386_defconfig" if X86_32 default "arch/x86/configs/x86_64_defconfig" if X86_64 - -config GENERIC_LOCKBREAK - def_bool n - config GENERIC_TIME def_bool y @@ -93,7 +92,7 @@ config GENERIC_HWEIGHT def_bool y config GENERIC_GPIO - def_bool n + bool config ARCH_MAY_HAVE_PC_FDC def_bool y @@ -104,12 +103,6 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM def_bool X86_XADD -config ARCH_HAS_ILOG2_U32 - def_bool n - -config ARCH_HAS_ILOG2_U64 - def_bool n - config ARCH_HAS_CPU_IDLE_WAIT def_bool y @@ -151,9 +144,6 @@ config AUDIT_ARCH bool default X86_64 -config ARCH_SUPPORTS_AOUT - def_bool y - config ARCH_SUPPORTS_OPTIMIZED_INLINING def_bool y @@ -204,6 +194,7 @@ config X86_TRAMPOLINE config KTIME_SCALAR def_bool X86_32 source "init/Kconfig" +source "kernel/Kconfig.freezer" menu "Processor type and features" @@ -553,6 +544,7 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT config AMD_IOMMU bool "AMD IOMMU support" select SWIOTLB + select PCI_MSI depends on X86_64 && PCI && ACPI help With this option you can enable support for AMD IOMMU hardware in @@ -758,9 +750,8 @@ config I8K Say N otherwise. config X86_REBOOTFIXUPS - def_bool n - prompt "Enable X86 board specific fixups for reboot" - depends on X86_32 && X86 + bool "Enable X86 board specific fixups for reboot" + depends on X86_32 ---help--- This enables chipset and/or board specific fixups to be done in order to get reboot to work correctly. This is only needed on @@ -776,23 +767,45 @@ config X86_REBOOTFIXUPS Say N otherwise. config MICROCODE - tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support" + tristate "/dev/cpu/microcode - microcode support" select FW_LOADER ---help--- If you say Y here, you will be able to update the microcode on - Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II, - Pentium III, Pentium 4, Xeon etc. You will obviously need the - actual microcode binary data itself which is not shipped with the - Linux kernel. + certain Intel and AMD processors. The Intel support is for the + IA32 family, e.g. Pentium Pro, Pentium II, Pentium III, + Pentium 4, Xeon etc. The AMD support is for family 0x10 and + 0x11 processors, e.g. Opteron, Phenom and Turion 64 Ultra. + You will obviously need the actual microcode binary data itself + which is not shipped with the Linux kernel. - For latest news and information on obtaining all the required - ingredients for this driver, check: - <http://www.urbanmyth.org/microcode/>. + This option selects the general module only, you need to select + at least one vendor specific module as well. To compile this driver as a module, choose M here: the module will be called microcode. -config MICROCODE_OLD_INTERFACE +config MICROCODE_INTEL + bool "Intel microcode patch loading support" + depends on MICROCODE + default MICROCODE + select FW_LOADER + --help--- + This options enables microcode patch loading support for Intel + processors. + + For latest news and information on obtaining all the required + Intel ingredients for this driver, check: + <http://www.urbanmyth.org/microcode/>. + +config MICROCODE_AMD + bool "AMD microcode patch loading support" + depends on MICROCODE + select FW_LOADER + --help--- + If you select this option, microcode patch loading support for AMD + processors will be enabled. + + config MICROCODE_OLD_INTERFACE def_bool y depends on MICROCODE @@ -922,16 +935,17 @@ config HIGHMEM depends on X86_32 && (HIGHMEM64G || HIGHMEM4G) config X86_PAE - def_bool n - prompt "PAE (Physical Address Extension) Support" + bool "PAE (Physical Address Extension) Support" depends on X86_32 && !HIGHMEM4G - select RESOURCES_64BIT help PAE is required for NX support, and furthermore enables larger swapspace support for non-overcommit purposes. It has the cost of more pagetable lookup overhead, and also consumes more pagetable space per process. +config ARCH_PHYS_ADDR_T_64BIT + def_bool X86_64 || X86_PAE + # Common NUMA Features config NUMA bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)" @@ -1020,7 +1034,7 @@ config HAVE_ARCH_ALLOC_REMAP config ARCH_FLATMEM_ENABLE def_bool y - depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC && !NUMA + depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && !NUMA config ARCH_DISCONTIGMEM_ENABLE def_bool y @@ -1036,7 +1050,7 @@ config ARCH_SPARSEMEM_DEFAULT config ARCH_SPARSEMEM_ENABLE def_bool y - depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC) + depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC) || X86_GENERICARCH select SPARSEMEM_STATIC if X86_32 select SPARSEMEM_VMEMMAP_ENABLE if X86_64 @@ -1059,6 +1073,56 @@ config HIGHPTE low memory. Setting this option will put user-space page table entries in high memory. +config X86_CHECK_BIOS_CORRUPTION + bool "Check for low memory corruption" + help + Periodically check for memory corruption in low memory, which + is suspected to be caused by BIOS. Even when enabled in the + configuration, it is disabled at runtime. Enable it by + setting "memory_corruption_check=1" on the kernel command + line. By default it scans the low 64k of memory every 60 + seconds; see the memory_corruption_check_size and + memory_corruption_check_period parameters in + Documentation/kernel-parameters.txt to adjust this. + + When enabled with the default parameters, this option has + almost no overhead, as it reserves a relatively small amount + of memory and scans it infrequently. It both detects corruption + and prevents it from affecting the running system. + + It is, however, intended as a diagnostic tool; if repeatable + BIOS-originated corruption always affects the same memory, + you can use memmap= to prevent the kernel from using that + memory. + +config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK + bool "Set the default setting of memory_corruption_check" + depends on X86_CHECK_BIOS_CORRUPTION + default y + help + Set whether the default state of memory_corruption_check is + on or off. + +config X86_RESERVE_LOW_64K + bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen" + default y + help + Reserve the first 64K of physical RAM on BIOSes that are known + to potentially corrupt that memory range. A numbers of BIOSes are + known to utilize this area during suspend/resume, so it must not + be used by the kernel. + + Set this to N if you are absolutely sure that you trust the BIOS + to get all its memory reservations and usages right. + + If you have doubts about the BIOS (e.g. suspend/resume does not + work or there's kernel crashes after certain hardware hotplug + events) and it's not AMI or Phoenix, then you might want to enable + X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical + corruption patterns. + + Say Y if unsure. + config MATH_EMULATION bool prompt "Math emulation" if X86_32 @@ -1117,10 +1181,10 @@ config MTRR You can safely say Y even if your machine doesn't have MTRRs, you'll just add about 9 KB to your kernel. - See <file:Documentation/mtrr.txt> for more information. + See <file:Documentation/x86/mtrr.txt> for more information. config MTRR_SANITIZER - bool + def_bool y prompt "MTRR cleanup support" depends on MTRR help @@ -1131,7 +1195,7 @@ config MTRR_SANITIZER The largest mtrr entry size for a continous block can be set with mtrr_chunk_size. - If unsure, say N. + If unsure, say Y. config MTRR_SANITIZER_ENABLE_DEFAULT int "MTRR cleanup enable value (0-1)" @@ -1166,8 +1230,7 @@ config X86_PAT If unsure, say Y. config EFI - def_bool n - prompt "EFI runtime service support" + bool "EFI runtime service support" depends on ACPI ---help--- This enables the kernel to use EFI runtime services that are @@ -1180,18 +1243,9 @@ config EFI resultant kernel should continue to boot on existing non-EFI platforms. -config IRQBALANCE - def_bool y - prompt "Enable kernel irq balancing" - depends on X86_32 && SMP && X86_IO_APIC - help - The default yes will allow the kernel to do irq load balancing. - Saying no will keep the kernel from doing irq load balancing. - config SECCOMP def_bool y prompt "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS help This kernel feature is useful for number crunching applications that may need to compute untrusted bytecode during their @@ -1199,7 +1253,7 @@ config SECCOMP the process as file descriptors supporting the read/write syscalls, it's possible to isolate those applications in their own address space using seccomp. Once seccomp is - enabled via /proc/<pid>/seccomp, it cannot be disabled + enabled via prctl(PR_SET_SECCOMP), it cannot be disabled and the task is only allowed to execute a few safe syscalls defined by each seccomp mode. @@ -1356,14 +1410,14 @@ config PHYSICAL_ALIGN Don't change this unless you know what you are doing. config HOTPLUG_CPU - bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER + bool "Support for hot-pluggable CPUs" + depends on SMP && HOTPLUG && !X86_VOYAGER ---help--- - Say Y here to experiment with turning CPUs off and on, and to - enable suspend on SMP systems. CPUs can be controlled through - /sys/devices/system/cpu. - Say N if you want to disable CPU hotplug and don't need to - suspend. + Say Y here to allow turning CPUs off and on. CPUs can be + controlled through /sys/devices/system/cpu. + ( Note: power management support will enable this option + automatically on SMP systems. ) + Say N if you want to disable CPU hotplug. config COMPAT_VDSO def_bool y @@ -1378,6 +1432,51 @@ config COMPAT_VDSO If unsure, say Y. +config CMDLINE_BOOL + bool "Built-in kernel command line" + default n + help + Allow for specifying boot arguments to the kernel at + build time. On some systems (e.g. embedded ones), it is + necessary or convenient to provide some or all of the + kernel boot arguments with the kernel itself (that is, + to not rely on the boot loader to provide them.) + + To compile command line arguments into the kernel, + set this option to 'Y', then fill in the + the boot arguments in CONFIG_CMDLINE. + + Systems with fully functional boot loaders (i.e. non-embedded) + should leave this option set to 'N'. + +config CMDLINE + string "Built-in kernel command string" + depends on CMDLINE_BOOL + default "" + help + Enter arguments here that should be compiled into the kernel + image and used at boot time. If the boot loader provides a + command line at boot time, it is appended to this string to + form the full kernel command line, when the system boots. + + However, you can use the CONFIG_CMDLINE_OVERRIDE option to + change this behavior. + + In most cases, the command line (whether built-in or provided + by the boot loader) should specify the device for the root + file system. + +config CMDLINE_OVERRIDE + bool "Built-in command line overrides boot loader arguments" + default n + depends on CMDLINE_BOOL + help + Set this option to 'Y' to have the kernel ignore the boot loader + command line, and use ONLY the built-in command line. + + This is used to work around broken boot loaders. This should + be set to 'N' under normal conditions. + endmenu config ARCH_ENABLE_MEMORY_HOTPLUG @@ -1643,6 +1742,14 @@ config DMAR_FLOPPY_WA workaround will setup a 1:1 mapping for the first 16M to make floppy (an ISA device) work. +config INTR_REMAP + bool "Support for Interrupt Remapping (EXPERIMENTAL)" + depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL + help + Supports Interrupt remapping for IO-APIC and MSI devices. + To use x2apic mode in the CPU's which support x2APIC enhancements or + to support platforms with CPU's having > 8 bit APIC ID, say Y. + source "drivers/pci/pcie/Kconfig" source "drivers/pci/Kconfig" @@ -1759,7 +1866,7 @@ config IA32_EMULATION config IA32_AOUT tristate "IA32 a.out support" - depends on IA32_EMULATION && ARCH_SUPPORTS_AOUT + depends on IA32_EMULATION help Support old a.out binaries in the 32bit emulation. @@ -1773,7 +1880,7 @@ config COMPAT_FOR_U64_ALIGNMENT config SYSVIPC_COMPAT def_bool y - depends on X86_64 && COMPAT && SYSVIPC + depends on COMPAT && SYSVIPC endmenu |