diff options
Diffstat (limited to 'arch/x86/Kconfig')
| -rw-r--r-- | arch/x86/Kconfig | 126 |
1 files changed, 64 insertions, 62 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index c71a8f8bdba..1b7c74350a0 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -24,7 +24,7 @@ config X86 select HAVE_UNSTABLE_SCHED_CLOCK select HAVE_IDE select HAVE_OPROFILE - select HAVE_PERF_COUNTERS if (!M386 && !M486) + select HAVE_PERF_EVENTS if (!M386 && !M486) select HAVE_IOREMAP_PROT select HAVE_KPROBES select ARCH_WANT_OPTIONAL_GPIOLIB @@ -87,10 +87,6 @@ config STACKTRACE_SUPPORT config HAVE_LATENCYTOP_SUPPORT def_bool y -config FAST_CMPXCHG_LOCAL - bool - default y - config MMU def_bool y @@ -151,7 +147,10 @@ config ARCH_HAS_CACHE_LINE_SIZE config HAVE_SETUP_PER_CPU_AREA def_bool y -config HAVE_DYNAMIC_PER_CPU_AREA +config NEED_PER_CPU_EMBED_FIRST_CHUNK + def_bool y + +config NEED_PER_CPU_PAGE_FIRST_CHUNK def_bool y config HAVE_CPUMASK_OF_CPU_MAP @@ -180,6 +179,10 @@ config ARCH_SUPPORTS_OPTIMIZED_INLINING config ARCH_SUPPORTS_DEBUG_PAGEALLOC def_bool y +config HAVE_INTEL_TXT + def_bool y + depends on EXPERIMENTAL && DMAR && ACPI + # Use the generic interrupt handling code in kernel/irq/: config GENERIC_HARDIRQS bool @@ -319,6 +322,7 @@ config X86_EXTENDED_PLATFORM SGI 320/540 (Visual Workstation) Summit/EXA (IBM x440) Unisys ES7000 IA32 series + Moorestown MID devices If you have one of these systems, or if you want to build a generic distribution kernel, say Y here - otherwise say N. @@ -378,6 +382,18 @@ config X86_ELAN If unsure, choose "PC-compatible" instead. +config X86_MRST + bool "Moorestown MID platform" + depends on X86_32 + depends on X86_EXTENDED_PLATFORM + ---help--- + Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin + Internet Device(MID) platform. Moorestown consists of two chips: + Lincroft (CPU core, graphics, and memory controller) and Langwell IOH. + Unlike standard x86 PCs, Moorestown does not have many legacy devices + nor standard legacy replacement devices/features. e.g. Moorestown does + not contain i8259, i8254, HPET, legacy BIOS, most of the io ports. + config X86_RDC321X bool "RDC R-321x SoC" depends on X86_32 @@ -413,6 +429,17 @@ config X86_NUMAQ of Flat Logical. You will need a new lynxer.elf file to flash your firmware with - send email to <Martin.Bligh@us.ibm.com>. +config X86_SUPPORTS_MEMORY_FAILURE + bool + # MCE code calls memory_failure(): + depends on X86_MCE + # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags: + depends on !X86_NUMAQ + # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH: + depends on X86_64 || !SPARSEMEM + select ARCH_SUPPORTS_MEMORY_FAILURE + default y + config X86_VISWS bool "SGI 320/540 (Visual Workstation)" depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT @@ -465,7 +492,7 @@ if PARAVIRT_GUEST source "arch/x86/xen/Kconfig" config VMI - bool "VMI Guest support" + bool "VMI Guest support (DEPRECATED)" select PARAVIRT depends on X86_32 ---help--- @@ -474,6 +501,15 @@ config VMI at the moment), by linking the kernel to a GPL-ed ROM module provided by the hypervisor. + As of September 2009, VMware has started a phased retirement + of this feature from VMware's products. Please see + feature-removal-schedule.txt for details. If you are + planning to enable this option, please note that you cannot + live migrate a VMI enabled VM to a future VMware product, + which doesn't support VMI. So if you expect your kernel to + seamlessly migrate to newer VMware products, keep this + disabled. + config KVM_CLOCK bool "KVM paravirtualized clock" select PARAVIRT @@ -777,41 +813,17 @@ config X86_REROUTE_FOR_BROKEN_BOOT_IRQS increased on these systems. config X86_MCE - bool "Machine Check Exception" + bool "Machine Check / overheating reporting" ---help--- - Machine Check Exception support allows the processor to notify the - kernel if it detects a problem (e.g. overheating, component failure). + Machine Check support allows the processor to notify the + kernel if it detects a problem (e.g. overheating, data corruption). The action the kernel takes depends on the severity of the problem, - ranging from a warning message on the console, to halting the machine. - Your processor must be a Pentium or newer to support this - check the - flags in /proc/cpuinfo for mce. Note that some older Pentium systems - have a design flaw which leads to false MCE events - hence MCE is - disabled on all P5 processors, unless explicitly enabled with "mce" - as a boot argument. Similarly, if MCE is built in and creates a - problem on some new non-standard machine, you can boot with "nomce" - to disable it. MCE support simply ignores non-MCE processors like - the 386 and 486, so nearly everyone can say Y here. - -config X86_OLD_MCE - depends on X86_32 && X86_MCE - bool "Use legacy machine check code (will go away)" - default n - select X86_ANCIENT_MCE - ---help--- - Use the old i386 machine check code. This is merely intended for - testing in a transition period. Try this if you run into any machine - check related software problems, but report the problem to - linux-kernel. When in doubt say no. - -config X86_NEW_MCE - depends on X86_MCE - bool - default y if (!X86_OLD_MCE && X86_32) || X86_64 + ranging from warning messages to halting the machine. config X86_MCE_INTEL def_bool y prompt "Intel MCE features" - depends on X86_NEW_MCE && X86_LOCAL_APIC + depends on X86_MCE && X86_LOCAL_APIC ---help--- Additional support for intel specific MCE features such as the thermal monitor. @@ -819,14 +831,14 @@ config X86_MCE_INTEL config X86_MCE_AMD def_bool y prompt "AMD MCE features" - depends on X86_NEW_MCE && X86_LOCAL_APIC + depends on X86_MCE && X86_LOCAL_APIC ---help--- Additional support for AMD specific MCE features such as the DRAM Error Threshold. config X86_ANCIENT_MCE def_bool n - depends on X86_32 + depends on X86_32 && X86_MCE prompt "Support for old Pentium 5 / WinChip machine checks" ---help--- Include support for machine check handling on old Pentium 5 or WinChip @@ -839,36 +851,16 @@ config X86_MCE_THRESHOLD default y config X86_MCE_INJECT - depends on X86_NEW_MCE + depends on X86_MCE tristate "Machine check injector support" ---help--- Provide support for injecting machine checks for testing purposes. If you don't know what a machine check is and you don't do kernel QA it is safe to say n. -config X86_MCE_NONFATAL - tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4" - depends on X86_OLD_MCE - ---help--- - Enabling this feature starts a timer that triggers every 5 seconds which - will look at the machine check registers to see if anything happened. - Non-fatal problems automatically get corrected (but still logged). - Disable this if you don't want to see these messages. - Seeing the messages this option prints out may be indicative of dying - or out-of-spec (ie, overclocked) hardware. - This option only does something on certain CPUs. - (AMD Athlon/Duron and Intel Pentium 4) - -config X86_MCE_P4THERMAL - bool "check for P4 thermal throttling interrupt." - depends on X86_OLD_MCE && X86_MCE && (X86_UP_APIC || SMP) - ---help--- - Enabling this feature will cause a message to be printed when the P4 - enters thermal throttling. - config X86_THERMAL_VECTOR def_bool y - depends on X86_MCE_P4THERMAL || X86_MCE_INTEL + depends on X86_MCE_INTEL config VM86 bool "Enable VM86 support" if EMBEDDED @@ -1229,6 +1221,10 @@ config ARCH_DISCONTIGMEM_DEFAULT def_bool y depends on NUMA && X86_32 +config ARCH_PROC_KCORE_TEXT + def_bool y + depends on X86_64 && PROC_KCORE + config ARCH_SPARSEMEM_DEFAULT def_bool y depends on X86_64 @@ -1414,6 +1410,10 @@ config X86_PAT If unsure, say Y. +config ARCH_USES_PG_UNCACHED + def_bool y + depends on X86_PAT + config EFI bool "EFI runtime service support" depends on ACPI @@ -1683,6 +1683,8 @@ source "kernel/power/Kconfig" source "drivers/acpi/Kconfig" +source "drivers/sfi/Kconfig" + config X86_APM_BOOT bool default y @@ -1878,7 +1880,7 @@ config PCI_DIRECT config PCI_MMCONFIG def_bool y - depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY) + depends on X86_32 && PCI && (ACPI || SFI) && (PCI_GOMMCONFIG || PCI_GOANY) config PCI_OLPC def_bool y @@ -1916,7 +1918,7 @@ config DMAR_DEFAULT_ON config DMAR_BROKEN_GFX_WA def_bool n prompt "Workaround broken graphics drivers (going away soon)" - depends on DMAR + depends on DMAR && BROKEN ---help--- Current Graphics drivers tend to use physical address for DMA and avoid using DMA APIs. Setting this config |