diff options
Diffstat (limited to 'arch/x86/kernel/apic_32.c')
| -rw-r--r-- | arch/x86/kernel/apic_32.c | 699 |
1 files changed, 388 insertions, 311 deletions
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 4b99b1bdeb6..21c831d96af 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -52,29 +52,38 @@ unsigned long mp_lapic_addr; -DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID; -EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid); - /* * Knob to control our willingness to enable the local APIC. * - * -1=force-disable, +1=force-enable + * +1=force-enable */ -static int enable_local_apic __initdata; +static int force_enable_local_apic; +int disable_apic; -/* Local APIC timer verification ok */ -static int local_apic_timer_verify_ok; -/* Disable local APIC timer from the kernel commandline or via dmi quirk - or using CPU MSR check */ -int local_apic_timer_disabled; +/* Disable local APIC timer from the kernel commandline or via dmi quirk */ +static int disable_apic_timer __cpuinitdata; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); +int first_system_vector = 0xfe; + +char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; + /* * Debug level, exported for io_apic.c */ -int apic_verbosity; +unsigned int apic_verbosity; + +int pic_mode; + +/* Have we found an MP table */ +int smp_found_config; + +static struct resource lapic_resource = { + .name = "Local APIC", + .flags = IORESOURCE_MEM | IORESOURCE_BUSY, +}; static unsigned int calibration_result; @@ -119,7 +128,11 @@ static inline int lapic_get_version(void) */ static inline int lapic_is_integrated(void) { +#ifdef CONFIG_X86_64 + return 1; +#else return APIC_INTEGRATED(lapic_get_version()); +#endif } /* @@ -134,13 +147,18 @@ static int modern_apic(void) return lapic_get_version() >= 0x14; } -void apic_wait_icr_idle(void) +/* + * Paravirt kernels also might be using these below ops. So we still + * use generic apic_read()/apic_write(), which might be pointing to different + * ops in PARAVIRT case. + */ +void xapic_wait_icr_idle(void) { while (apic_read(APIC_ICR) & APIC_ICR_BUSY) cpu_relax(); } -u32 safe_apic_wait_icr_idle(void) +u32 safe_xapic_wait_icr_idle(void) { u32 send_status; int timeout; @@ -156,17 +174,49 @@ u32 safe_apic_wait_icr_idle(void) return send_status; } +void xapic_icr_write(u32 low, u32 id) +{ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id)); + apic_write(APIC_ICR, low); +} + +u64 xapic_icr_read(void) +{ + u32 icr1, icr2; + + icr2 = apic_read(APIC_ICR2); + icr1 = apic_read(APIC_ICR); + + return icr1 | ((u64)icr2 << 32); +} + +static struct apic_ops xapic_ops = { + .read = native_apic_mem_read, + .write = native_apic_mem_write, + .icr_read = xapic_icr_read, + .icr_write = xapic_icr_write, + .wait_icr_idle = xapic_wait_icr_idle, + .safe_wait_icr_idle = safe_xapic_wait_icr_idle, +}; + +struct apic_ops __read_mostly *apic_ops = &xapic_ops; +EXPORT_SYMBOL_GPL(apic_ops); + /** * enable_NMI_through_LVT0 - enable NMI through local vector table 0 */ void __cpuinit enable_NMI_through_LVT0(void) { - unsigned int v = APIC_DM_NMI; + unsigned int v; + + /* unmask and set to NMI */ + v = APIC_DM_NMI; - /* Level triggered for 82489DX */ + /* Level triggered for 82489DX (32bit mode) */ if (!lapic_is_integrated()) v |= APIC_LVT_LEVEL_TRIGGER; - apic_write_around(APIC_LVT0, v); + + apic_write(APIC_LVT0, v); } /** @@ -182,9 +232,13 @@ int get_physical_broadcast(void) */ int lapic_get_maxlvt(void) { - unsigned int v = apic_read(APIC_LVR); + unsigned int v; - /* 82489DXs do not report # of LVT entries. */ + v = apic_read(APIC_LVR); + /* + * - we always have APIC integrated on 64bit mode + * - 82489DXs do not report # of LVT entries + */ return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2; } @@ -192,8 +246,12 @@ int lapic_get_maxlvt(void) * Local APIC timer */ -/* Clock divisor is set to 16 */ +/* Clock divisor */ +#ifdef CONFG_X86_64 +#define APIC_DIVISOR 1 +#else #define APIC_DIVISOR 16 +#endif /* * This function sets up the local APIC timer, with a timeout of @@ -218,27 +276,61 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) if (!irqen) lvtt_value |= APIC_LVT_MASKED; - apic_write_around(APIC_LVTT, lvtt_value); + apic_write(APIC_LVTT, lvtt_value); /* * Divide PICLK by 16 */ tmp_value = apic_read(APIC_TDCR); - apic_write_around(APIC_TDCR, (tmp_value - & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) - | APIC_TDR_DIV_16); + apic_write(APIC_TDCR, + (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | + APIC_TDR_DIV_16); if (!oneshot) - apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR); + apic_write(APIC_TMICT, clocks / APIC_DIVISOR); } /* + * Setup extended LVT, AMD specific (K8, family 10h) + * + * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and + * MCE interrupts are supported. Thus MCE offset must be set to 0. + * + * If mask=1, the LVT entry does not generate interrupts while mask=0 + * enables the vector. See also the BKDGs. + */ + +#define APIC_EILVT_LVTOFF_MCE 0 +#define APIC_EILVT_LVTOFF_IBS 1 + +static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask) +{ + unsigned long reg = (lvt_off << 4) + APIC_EILVT0; + unsigned int v = (mask << 16) | (msg_type << 8) | vector; + + apic_write(reg, v); +} + +u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask) +{ + setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask); + return APIC_EILVT_LVTOFF_MCE; +} + +u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask) +{ + setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask); + return APIC_EILVT_LVTOFF_IBS; +} +EXPORT_SYMBOL_GPL(setup_APIC_eilvt_ibs); + +/* * Program the next event, relative to now */ static int lapic_next_event(unsigned long delta, struct clock_event_device *evt) { - apic_write_around(APIC_TMICT, delta); + apic_write(APIC_TMICT, delta); return 0; } @@ -251,8 +343,8 @@ static void lapic_timer_setup(enum clock_event_mode mode, unsigned long flags; unsigned int v; - /* Lapic used for broadcast ? */ - if (!local_apic_timer_verify_ok) + /* Lapic used as dummy for broadcast ? */ + if (evt->features & CLOCK_EVT_FEAT_DUMMY) return; local_irq_save(flags); @@ -267,7 +359,7 @@ static void lapic_timer_setup(enum clock_event_mode mode, case CLOCK_EVT_MODE_SHUTDOWN: v = apic_read(APIC_LVTT); v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write_around(APIC_LVTT, v); + apic_write(APIC_LVTT, v); break; case CLOCK_EVT_MODE_RESUME: /* Nothing to do here */ @@ -361,12 +453,7 @@ static void __init lapic_cal_handler(struct clock_event_device *dev) } } -/* - * Setup the boot APIC - * - * Calibrate and verify the result. - */ -void __init setup_boot_APIC_clock(void) +static int __init calibrate_APIC_clock(void) { struct clock_event_device *levt = &__get_cpu_var(lapic_events); const long pm_100ms = PMTMR_TICKS_PER_SEC/10; @@ -376,24 +463,6 @@ void __init setup_boot_APIC_clock(void) long delta, deltapm; int pm_referenced = 0; - /* - * The local apic timer can be disabled via the kernel - * commandline or from the CPU detection code. Register the lapic - * timer as a dummy clock event source on SMP systems, so the - * broadcast mechanism is used. On UP systems simply ignore it. - */ - if (local_apic_timer_disabled) { - /* No broadcast on UP ! */ - if (num_possible_cpus() > 1) { - lapic_clockevent.mult = 1; - setup_APIC_timer(); - } - return; - } - - apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n" - "calibrating APIC timer ...\n"); - local_irq_disable(); /* Replace the global interrupt handler */ @@ -478,8 +547,6 @@ void __init setup_boot_APIC_clock(void) calibration_result / (1000000 / HZ), calibration_result % (1000000 / HZ)); - local_apic_timer_verify_ok = 1; - /* * Do a sanity check on the APIC calibration result */ @@ -487,12 +554,11 @@ void __init setup_boot_APIC_clock(void) local_irq_enable(); printk(KERN_WARNING "APIC frequency too slow, disabling apic timer\n"); - /* No broadcast on UP ! */ - if (num_possible_cpus() > 1) - setup_APIC_timer(); - return; + return -1; } + levt->features &= ~CLOCK_EVT_FEAT_DUMMY; + /* We trust the pm timer based calibration */ if (!pm_referenced) { apic_printk(APIC_VERBOSE, "... verify APIC timer\n"); @@ -525,29 +591,63 @@ void __init setup_boot_APIC_clock(void) if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2) apic_printk(APIC_VERBOSE, "... jiffies result ok\n"); else - local_apic_timer_verify_ok = 0; + levt->features |= CLOCK_EVT_FEAT_DUMMY; } else local_irq_enable(); - if (!local_apic_timer_verify_ok) { + if (levt->features & CLOCK_EVT_FEAT_DUMMY) { printk(KERN_WARNING "APIC timer disabled due to verification failure.\n"); + return -1; + } + + return 0; +} + +/* + * Setup the boot APIC + * + * Calibrate and verify the result. + */ +void __init setup_boot_APIC_clock(void) +{ + /* + * The local apic timer can be disabled via the kernel + * commandline or from the CPU detection code. Register the lapic + * timer as a dummy clock event source on SMP systems, so the + * broadcast mechanism is used. On UP systems simply ignore it. + */ + if (disable_apic_timer) { + printk(KERN_INFO "Disabling APIC timer\n"); /* No broadcast on UP ! */ - if (num_possible_cpus() == 1) - return; - } else { - /* - * If nmi_watchdog is set to IO_APIC, we need the - * PIT/HPET going. Otherwise register lapic as a dummy - * device. - */ - if (nmi_watchdog != NMI_IO_APIC) - lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; - else - printk(KERN_WARNING "APIC timer registered as dummy," - " due to nmi_watchdog=1!\n"); + if (num_possible_cpus() > 1) { + lapic_clockevent.mult = 1; + setup_APIC_timer(); + } + return; } + apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n" + "calibrating APIC timer ...\n"); + + if (calibrate_APIC_clock()) { + /* No broadcast on UP ! */ + if (num_possible_cpus() > 1) + setup_APIC_timer(); + return; + } + + /* + * If nmi_watchdog is set to IO_APIC, we need the + * PIT/HPET going. Otherwise register lapic as a dummy + * device. + */ + if (nmi_watchdog != NMI_IO_APIC) + lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; + else + printk(KERN_WARNING "APIC timer registered as dummy," + " due to nmi_watchdog=%d!\n", nmi_watchdog); + /* Setup the lapic or request the broadcast */ setup_APIC_timer(); } @@ -587,7 +687,11 @@ static void local_apic_timer_interrupt(void) /* * the NMI deadlock-detector uses this. */ +#ifdef CONFIG_X86_64 + add_pda(apic_timer_irqs, 1); +#else per_cpu(irq_stat, cpu).apic_timer_irqs++; +#endif evt->event_handler(evt); } @@ -627,35 +731,6 @@ int setup_profiling_timer(unsigned int multiplier) } /* - * Setup extended LVT, AMD specific (K8, family 10h) - * - * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and - * MCE interrupts are supported. Thus MCE offset must be set to 0. - */ - -#define APIC_EILVT_LVTOFF_MCE 0 -#define APIC_EILVT_LVTOFF_IBS 1 - -static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask) -{ - unsigned long reg = (lvt_off << 4) + APIC_EILVT0; - unsigned int v = (mask << 16) | (msg_type << 8) | vector; - apic_write(reg, v); -} - -u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask) -{ - setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask); - return APIC_EILVT_LVTOFF_MCE; -} - -u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask) -{ - setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask); - return APIC_EILVT_LVTOFF_IBS; -} - -/* * Local APIC start and shutdown */ @@ -682,45 +757,41 @@ void clear_local_APIC(void) */ if (maxlvt >= 3) { v = ERROR_APIC_VECTOR; /* any non-zero vector will do */ - apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED); + apic_write(APIC_LVTERR, v | APIC_LVT_MASKED); } /* * Careful: we have to set masks only first to deassert * any level-triggered sources. */ v = apic_read(APIC_LVTT); - apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED); + apic_write(APIC_LVTT, v | APIC_LVT_MASKED); v = apic_read(APIC_LVT0); - apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); + apic_write(APIC_LVT0, v | APIC_LVT_MASKED); v = apic_read(APIC_LVT1); - apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED); + apic_write(APIC_LVT1, v | APIC_LVT_MASKED); if (maxlvt >= 4) { v = apic_read(APIC_LVTPC); - apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED); + apic_write(APIC_LVTPC, v | APIC_LVT_MASKED); } /* lets not touch this if we didn't frob it */ -#ifdef CONFIG_X86_MCE_P4THERMAL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL) if (maxlvt >= 5) { v = apic_read(APIC_LVTTHMR); - apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED); + apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED); } #endif /* * Clean APIC state for other OSs: */ - apic_write_around(APIC_LVTT, APIC_LVT_MASKED); - apic_write_around(APIC_LVT0, APIC_LVT_MASKED); - apic_write_around(APIC_LVT1, APIC_LVT_MASKED); + apic_write(APIC_LVTT, APIC_LVT_MASKED); + apic_write(APIC_LVT0, APIC_LVT_MASKED); + apic_write(APIC_LVT1, APIC_LVT_MASKED); if (maxlvt >= 3) - apic_write_around(APIC_LVTERR, APIC_LVT_MASKED); + apic_write(APIC_LVTERR, APIC_LVT_MASKED); if (maxlvt >= 4) - apic_write_around(APIC_LVTPC, APIC_LVT_MASKED); + apic_write(APIC_LVTPC, APIC_LVT_MASKED); -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) - apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED); -#endif /* Integrated APIC (!82489DX) ? */ if (lapic_is_integrated()) { if (maxlvt > 3) @@ -735,7 +806,7 @@ void clear_local_APIC(void) */ void disable_local_APIC(void) { - unsigned long value; + unsigned int value; clear_local_APIC(); @@ -745,8 +816,9 @@ void disable_local_APIC(void) */ value = apic_read(APIC_SPIV); value &= ~APIC_SPIV_APIC_ENABLED; - apic_write_around(APIC_SPIV, value); + apic_write(APIC_SPIV, value); +#ifdef CONFIG_X86_32 /* * When LAPIC was disabled by the BIOS and enabled by the kernel, * restore the disabled state. @@ -758,6 +830,7 @@ void disable_local_APIC(void) l &= ~MSR_IA32_APICBASE_ENABLE; wrmsr(MSR_IA32_APICBASE, l, h); } +#endif } /* @@ -774,11 +847,15 @@ void lapic_shutdown(void) return; local_irq_save(flags); - clear_local_APIC(); - if (enabled_via_apicbase) +#ifdef CONFIG_X86_32 + if (!enabled_via_apicbase) + clear_local_APIC(); + else +#endif disable_local_APIC(); + local_irq_restore(flags); } @@ -823,6 +900,12 @@ int __init verify_local_APIC(void) */ reg0 = apic_read(APIC_ID); apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); + apic_write(APIC_ID, reg0 ^ APIC_ID_MASK); + reg1 = apic_read(APIC_ID); + apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1); + apic_write(APIC_ID, reg0); + if (reg1 != (reg0 ^ APIC_ID_MASK)) + return 0; /* * The next two are just to see if we have sane values. @@ -848,14 +931,15 @@ void __init sync_Arb_IDs(void) */ if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD) return; + /* * Wait for idle. */ apic_wait_icr_idle(); apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); - apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG - | APIC_DM_INIT); + apic_write(APIC_ICR, APIC_DEST_ALLINC | + APIC_INT_LEVELTRIG | APIC_DM_INIT); } /* @@ -863,7 +947,7 @@ void __init sync_Arb_IDs(void) */ void __init init_bsp_APIC(void) { - unsigned long value; + unsigned int value; /* * Don't do the setup now if we have a SMP BIOS as the @@ -884,29 +968,41 @@ void __init init_bsp_APIC(void) value &= ~APIC_VECTOR_MASK; value |= APIC_SPIV_APIC_ENABLED; +#ifdef CONFIG_X86_32 /* This bit is reserved on P4/Xeon and should be cleared */ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 15)) value &= ~APIC_SPIV_FOCUS_DISABLED; else +#endif value |= APIC_SPIV_FOCUS_DISABLED; value |= SPURIOUS_APIC_VECTOR; - apic_write_around(APIC_SPIV, value); + apic_write(APIC_SPIV, value); /* * Set up the virtual wire mode. */ - apic_write_around(APIC_LVT0, APIC_DM_EXTINT); + apic_write(APIC_LVT0, APIC_DM_EXTINT); value = APIC_DM_NMI; if (!lapic_is_integrated()) /* 82489DX */ value |= APIC_LVT_LEVEL_TRIGGER; - apic_write_around(APIC_LVT1, value); + apic_write(APIC_LVT1, value); } static void __cpuinit lapic_setup_esr(void) { unsigned long oldvalue, value, maxlvt; if (lapic_is_integrated() && !esr_disable) { + if (esr_disable) { + /* + * Something untraceable is creating bad interrupts on + * secondary quads ... for the moment, just leave the + * ESR disabled - we can't do anything useful with the + * errors anyway - mbligh + */ + printk(KERN_INFO "Leaving ESR disabled.\n"); + return; + } /* !82489DX */ maxlvt = lapic_get_maxlvt(); if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ @@ -915,7 +1011,7 @@ static void __cpuinit lapic_setup_esr(void) /* enables sending errors */ value = ERROR_APIC_VECTOR; - apic_write_around(APIC_LVTERR, value); + apic_write(APIC_LVTERR, value); /* * spec says clear errors after enabling vector. */ @@ -927,16 +1023,7 @@ static void __cpuinit lapic_setup_esr(void) "vector: 0x%08lx after: 0x%08lx\n", oldvalue, value); } else { - if (esr_disable) - /* - * Something untraceable is creating bad interrupts on - * secondary quads ... for the moment, just leave the - * ESR disabled - we can't do anything useful with the - * errors anyway - mbligh - */ - printk(KERN_INFO "Leaving ESR disabled.\n"); - else - printk(KERN_INFO "No ESR for 82489DX.\n"); + printk(KERN_INFO "No ESR for 82489DX.\n"); } } @@ -963,7 +1050,7 @@ void __cpuinit setup_local_APIC(void) * Double-check whether this APIC is really registered. */ if (!apic_id_registered()) - BUG(); + WARN_ON_ONCE(1); /* * Intel recommends to set DFR, LDR and TPR before enabling @@ -978,7 +1065,7 @@ void __cpuinit setup_local_APIC(void) */ value = apic_read(APIC_TASKPRI); value &= ~APIC_TPRI_MASK; - apic_write_around(APIC_TASKPRI, value); + apic_write(APIC_TASKPRI, value); /* * After a crash, we no longer service the interrupts and a pending @@ -1036,7 +1123,7 @@ void __cpuinit setup_local_APIC(void) * Set spurious IRQ vector */ value |= SPURIOUS_APIC_VECTOR; - apic_write_around(APIC_SPIV, value); + apic_write(APIC_SPIV, value); /* * Set up LVT0, LVT1: @@ -1058,7 +1145,7 @@ void __cpuinit setup_local_APIC(void) apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", smp_processor_id()); } - apic_write_around(APIC_LVT0, value); + apic_write(APIC_LVT0, value); /* * only the BP should see the LINT1 NMI signal, obviously. @@ -1069,18 +1156,22 @@ void __cpuinit setup_local_APIC(void) value = APIC_DM_NMI | APIC_LVT_MASKED; if (!integrated) /* 82489DX */ value |= APIC_LVT_LEVEL_TRIGGER; - apic_write_around(APIC_LVT1, value); + apic_write(APIC_LVT1, value); } void __cpuinit end_local_APIC_setup(void) { - unsigned long value; - lapic_setup_esr(); - /* Disable the local apic timer */ - value = apic_read(APIC_LVTT); - value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write_around(APIC_LVTT, value); + +#ifdef CONFIG_X86_32 + { + unsigned int value; + /* Disable the local apic timer */ + value = apic_read(APIC_LVTT); + value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write(APIC_LVTT, value); + } +#endif setup_apic_nmi_watchdog(NULL); apic_pm_activate(); @@ -1094,7 +1185,7 @@ static int __init detect_init_APIC(void) u32 h, l, features; /* Disabled by kernel option? */ - if (enable_local_apic < 0) + if (disable_apic) return -1; switch (boot_cpu_data.x86_vendor) { @@ -1117,7 +1208,7 @@ static int __init detect_init_APIC(void) * Over-ride BIOS and try to enable the local APIC only if * "lapic" specified. */ - if (enable_local_apic <= 0) { + if (!force_enable_local_apic) { printk(KERN_INFO "Local APIC disabled by BIOS -- " "you can enable it with \"lapic\"\n"); return -1; @@ -1154,9 +1245,6 @@ static int __init detect_init_APIC(void) if (l & MSR_IA32_APICBASE_ENABLE) mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; - if (nmi_watchdog != NMI_NONE && nmi_watchdog != NMI_DISABLED) - nmi_watchdog = NMI_LOCAL_APIC; - printk(KERN_INFO "Found and enabled local APIC!\n"); apic_pm_activate(); @@ -1193,38 +1281,8 @@ void __init init_apic_mappings(void) * default configuration (or the MP table is broken). */ if (boot_cpu_physical_apicid == -1U) - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); -#ifdef CONFIG_X86_IO_APIC - { - unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; - int i; - - for (i = 0; i < nr_ioapics; i++) { - if (smp_found_config) { - ioapic_phys = mp_ioapics[i].mpc_apicaddr; - if (!ioapic_phys) { - printk(KERN_ERR - "WARNING: bogus zero IO-APIC " - "address found in MPTABLE, " - "disabling IO/APIC support!\n"); - smp_found_config = 0; - skip_ioapic_setup = 1; - goto fake_ioapic_page; - } - } else { -fake_ioapic_page: - ioapic_phys = (unsigned long) - alloc_bootmem_pages(PAGE_SIZE); - ioapic_phys = __pa(ioapic_phys); - } - set_fixmap_nocache(idx, ioapic_phys); - printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n", - __fix_to_virt(idx), ioapic_phys); - idx++; - } - } -#endif } /* @@ -1236,9 +1294,6 @@ int apic_version[MAX_APICS]; int __init APIC_init_uniprocessor(void) { - if (enable_local_apic < 0) - clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); - if (!smp_found_config && !cpu_has_apic) return -1; @@ -1263,12 +1318,16 @@ int __init APIC_init_uniprocessor(void) * might be zero if read from MP tables. Get it from LAPIC. */ #ifdef CONFIG_CRASH_DUMP - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); #endif - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); + physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map); setup_local_APIC(); +#ifdef CONFIG_X86_IO_APIC + if (!smp_found_config || skip_ioapic_setup || !nr_ioapics) +#endif + localise_nmi_watchdog(); end_local_APIC_setup(); #ifdef CONFIG_X86_IO_APIC if (smp_found_config) @@ -1338,55 +1397,12 @@ void smp_error_interrupt(struct pt_regs *regs) irq_exit(); } -#ifdef CONFIG_SMP -void __init smp_intr_init(void) -{ - /* - * IRQ0 must be given a fixed assignment and initialized, - * because it's used before the IO-APIC is set up. - */ - set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]); - - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPI for invalidation */ - set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); - - /* IPI for generic function call */ - set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); -} -#endif - -/* - * Initialize APIC interrupts - */ -void __init apic_intr_init(void) -{ -#ifdef CONFIG_SMP - smp_intr_init(); -#endif - /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - - /* thermal monitor LVT interrupt */ -#ifdef CONFIG_X86_MCE_P4THERMAL - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); -#endif -} - /** * connect_bsp_APIC - attach the APIC to the interrupt system */ void __init connect_bsp_APIC(void) { +#ifdef CONFIG_X86_32 if (pic_mode) { /* * Do not trust the local APIC being empty at bootup. @@ -1401,6 +1417,7 @@ void __init connect_bsp_APIC(void) outb(0x70, 0x22); outb(0x01, 0x23); } +#endif enable_apic_mode(); } @@ -1413,6 +1430,9 @@ void __init connect_bsp_APIC(void) */ void disconnect_bsp_APIC(int virt_wire_setup) { + unsigned int value; + +#ifdef CONFIG_X86_32 if (pic_mode) { /* * Put the board back into PIC mode (has an effect only on @@ -1424,56 +1444,53 @@ void disconnect_bsp_APIC(int virt_wire_setup) "entering PIC mode.\n"); outb(0x70, 0x22); outb(0x00, 0x23); - } else { - /* Go back to Virtual Wire compatibility mode */ - unsigned long value; + return; + } +#endif - /* For the spurious interrupt use vector F, and enable it */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - value |= 0xf; - apic_write_around(APIC_SPIV, value); + /* Go back to Virtual Wire compatibility mode */ - if (!virt_wire_setup) { - /* - * For LVT0 make it edge triggered, active high, - * external and enabled - */ - value = apic_read(APIC_LVT0); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); - apic_write_around(APIC_LVT0, value); - } else { - /* Disable LVT0 */ - apic_write_around(APIC_LVT0, APIC_LVT_MASKED); - } + /* For the spurious interrupt use vector F, and enable it */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= 0xf; + apic_write(APIC_SPIV, value); + if (!virt_wire_setup) { /* - * For LVT1 make it edge triggered, active high, nmi and - * enabled + * For LVT0 make it edge triggered, active high, + * external and enabled */ - value = apic_read(APIC_LVT1); - value &= ~( - APIC_MODE_MASK | APIC_SEND_PENDING | + value = apic_read(APIC_LVT0); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); - apic_write_around(APIC_LVT1, value); + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); + apic_write(APIC_LVT0, value); + } else { + /* Disable LVT0 */ + apic_write(APIC_LVT0, APIC_LVT_MASKED); } -} -unsigned int __cpuinitdata maxcpus = NR_CPUS; + /* + * For LVT1 make it edge triggered, active high, + * nmi and enabled + */ + value = apic_read(APIC_LVT1); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); + apic_write(APIC_LVT1, value); +} void __cpuinit generic_processor_info(int apicid, int version) { int cpu; cpumask_t tmp_map; - physid_mask_t phys_cpu; /* * Validate version @@ -1486,33 +1503,29 @@ void __cpuinit generic_processor_info(int apicid, int version) } apic_version[apicid] = version; - phys_cpu = apicid_to_cpu_present(apicid); - physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu); - if (num_processors >= NR_CPUS) { printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." " Processor ignored.\n", NR_CPUS); return; } - if (num_processors >= maxcpus) { - printk(KERN_WARNING "WARNING: maxcpus limit of %i reached." - " Processor ignored.\n", maxcpus); - return; - } - num_processors++; cpus_complement(tmp_map, cpu_present_map); cpu = first_cpu(tmp_map); - if (apicid == boot_cpu_physical_apicid) + physid_set(apicid, phys_cpu_present_map); + if (apicid == boot_cpu_physical_apicid) { /* * x86_bios_cpu_apicid is required to have processors listed * in same order as logical cpu numbers. Hence the first * entry is BSP, and so on. */ cpu = 0; + } + if (apicid > max_physical_apicid) + max_physical_apicid = apicid; +#ifdef CONFIG_X86_32 /* * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y * but we need to work other dependencies like SMP_SUSPEND etc @@ -1520,7 +1533,7 @@ void __cpuinit generic_processor_info(int apicid, int version) * if (CPU_HOTPLUG_ENABLED || num_processors > 8) * - Ashok Raj <ashok.raj@intel.com> */ - if (num_processors > 8) { + if (max_physical_apicid >= 8) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_INTEL: if (!APIC_XAPIC(version)) { @@ -1532,11 +1545,13 @@ void __cpuinit generic_processor_info(int apicid, int version) def_to_bigsmp = 1; } } -#ifdef CONFIG_SMP +#endif + +#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64) /* are we being called early in kernel startup? */ - if (x86_cpu_to_apicid_early_ptr) { - u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr; - u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr; + if (early_per_cpu_ptr(x86_cpu_to_apicid)) { + u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid); + u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid); cpu_to_apicid[cpu] = apicid; bios_cpu_apicid[cpu] = apicid; @@ -1545,6 +1560,7 @@ void __cpuinit generic_processor_info(int apicid, int version) per_cpu(x86_bios_cpu_apicid, cpu) = apicid; } #endif + cpu_set(cpu, cpu_possible_map); cpu_set(cpu, cpu_present_map); } @@ -1555,6 +1571,11 @@ void __cpuinit generic_processor_info(int apicid, int version) #ifdef CONFIG_PM static struct { + /* + * 'active' is true if the local APIC was enabled by us and + * not the BIOS; this signifies that we are also responsible + * for disabling it before entering apm/acpi suspend + */ int active; /* r/w apic fields */ unsigned int apic_id; @@ -1595,7 +1616,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); apic_pm_state.apic_tmict = apic_read(APIC_TMICT); apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); -#ifdef CONFIG_X86_MCE_P4THERMAL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); #endif @@ -1619,16 +1640,23 @@ static int lapic_resume(struct sys_device *dev) local_irq_save(flags); - /* - * Make sure the APICBASE points to the right address - * - * FIXME! This will be wrong if we ever support suspend on - * SMP! We'll need to do this as part of the CPU restore! - */ - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); +#ifdef CONFIG_X86_64 + if (x2apic) + enable_x2apic(); + else +#endif + { + /* + * Make sure the APICBASE points to the right address + * + * FIXME! This will be wrong if we ever support suspend on + * SMP! We'll need to do this as part of the CPU restore! + */ + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + } apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); apic_write(APIC_ID, apic_pm_state.apic_id); @@ -1638,7 +1666,7 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_SPIV, apic_pm_state.apic_spiv); apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); -#ifdef CONFIG_X86_MCE_P4THERMAL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); #endif @@ -1652,7 +1680,9 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); apic_write(APIC_ESR, 0); apic_read(APIC_ESR); + local_irq_restore(flags); + return 0; } @@ -1703,25 +1733,25 @@ static void apic_pm_activate(void) { } */ static int __init parse_lapic(char *arg) { - enable_local_apic = 1; + force_enable_local_apic = 1; return 0; } early_param("lapic", parse_lapic); -static int __init parse_nolapic(char *arg) +static int __init setup_disableapic(char *arg) { - enable_local_apic = -1; - clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); + disable_apic = 1; + setup_clear_cpu_cap(X86_FEATURE_APIC); return 0; } -early_param("nolapic", parse_nolapic); +early_param("disableapic", setup_disableapic); -static int __init parse_disable_lapic_timer(char *arg) +/* same as disableapic, for compatibility */ +static int __init setup_nolapic(char *arg) { - local_apic_timer_disabled = 1; - return 0; + return setup_disableapic(arg); } -early_param("nolapic_timer", parse_disable_lapic_timer); +early_param("nolapic", setup_nolapic); static int __init parse_lapic_timer_c2_ok(char *arg) { @@ -1730,13 +1760,60 @@ static int __init parse_lapic_timer_c2_ok(char *arg) } early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok); -static int __init apic_set_verbosity(char *str) +static int __init parse_disable_apic_timer(char *arg) +{ + disable_apic_timer = 1; + return 0; +} +early_param("noapictimer", parse_disable_apic_timer); + +static int __init parse_nolapic_timer(char *arg) +{ + disable_apic_timer = 1; + return 0; +} +early_param("nolapic_timer", parse_nolapic_timer); + +static int __init apic_set_verbosity(char *arg) { - if (strcmp("debug", str) == 0) + if (!arg) { +#ifdef CONFIG_X86_64 + skip_ioapic_setup = 0; + ioapic_force = 1; + return 0; +#endif + return -EINVAL; + } + + if (strcmp("debug", arg) == 0) apic_verbosity = APIC_DEBUG; - else if (strcmp("verbose", str) == 0) + else if (strcmp("verbose", arg) == 0) apic_verbosity = APIC_VERBOSE; - return 1; + else { + printk(KERN_WARNING "APIC Verbosity level %s not recognised" + " use apic=verbose or apic=debug\n", arg); + return -EINVAL; + } + + return 0; +} +early_param("apic", apic_set_verbosity); + +static int __init lapic_insert_resource(void) +{ + if (!apic_phys) + return -1; + + /* Put local APIC into the resource map. */ + lapic_resource.start = apic_phys; + lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1; + insert_resource(&iomem_resource, &lapic_resource); + + return 0; } -__setup("apic=", apic_set_verbosity); +/* + * need call insert after e820_reserve_resources() + * that is using request_resource + */ +late_initcall(lapic_insert_resource); |