diff options
Diffstat (limited to 'arch/x86/kernel/microcode_core.c')
| -rw-r--r-- | arch/x86/kernel/microcode_core.c | 508 |
1 files changed, 508 insertions, 0 deletions
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c new file mode 100644 index 00000000000..936d8d55f23 --- /dev/null +++ b/arch/x86/kernel/microcode_core.c @@ -0,0 +1,508 @@ +/* + * Intel CPU Microcode Update Driver for Linux + * + * Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk> + * 2006 Shaohua Li <shaohua.li@intel.com> + * + * This driver allows to upgrade microcode on Intel processors + * belonging to IA-32 family - PentiumPro, Pentium II, + * Pentium III, Xeon, Pentium 4, etc. + * + * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture + * Software Developer's Manual + * Order Number 253668 or free download from: + * + * http://developer.intel.com/design/pentium4/manuals/253668.htm + * + * For more information, go to http://www.urbanmyth.org/microcode + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * 1.0 16 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Initial release. + * 1.01 18 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Added read() support + cleanups. + * 1.02 21 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Added 'device trimming' support. open(O_WRONLY) zeroes + * and frees the saved copy of applied microcode. + * 1.03 29 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Made to use devfs (/dev/cpu/microcode) + cleanups. + * 1.04 06 Jun 2000, Simon Trimmer <simon@veritas.com> + * Added misc device support (now uses both devfs and misc). + * Added MICROCODE_IOCFREE ioctl to clear memory. + * 1.05 09 Jun 2000, Simon Trimmer <simon@veritas.com> + * Messages for error cases (non Intel & no suitable microcode). + * 1.06 03 Aug 2000, Tigran Aivazian <tigran@veritas.com> + * Removed ->release(). Removed exclusive open and status bitmap. + * Added microcode_rwsem to serialize read()/write()/ioctl(). + * Removed global kernel lock usage. + * 1.07 07 Sep 2000, Tigran Aivazian <tigran@veritas.com> + * Write 0 to 0x8B msr and then cpuid before reading revision, + * so that it works even if there were no update done by the + * BIOS. Otherwise, reading from 0x8B gives junk (which happened + * to be 0 on my machine which is why it worked even when I + * disabled update by the BIOS) + * Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix. + * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and + * Tigran Aivazian <tigran@veritas.com> + * Intel Pentium 4 processor support and bugfixes. + * 1.09 30 Oct 2001, Tigran Aivazian <tigran@veritas.com> + * Bugfix for HT (Hyper-Threading) enabled processors + * whereby processor resources are shared by all logical processors + * in a single CPU package. + * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and + * Tigran Aivazian <tigran@veritas.com>, + * Serialize updates as required on HT processors due to + * speculative nature of implementation. + * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com> + * Fix the panic when writing zero-length microcode chunk. + * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, + * Jun Nakajima <jun.nakajima@intel.com> + * Support for the microcode updates in the new format. + * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com> + * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl + * because we no longer hold a copy of applied microcode + * in kernel memory. + * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com> + * Fix sigmatch() macro to handle old CPUs with pf == 0. + * Thanks to Stuart Swales for pointing out this bug. + */ +#include <linux/capability.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/smp_lock.h> +#include <linux/cpumask.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/miscdevice.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/mutex.h> +#include <linux/cpu.h> +#include <linux/firmware.h> +#include <linux/platform_device.h> + +#include <asm/msr.h> +#include <asm/uaccess.h> +#include <asm/processor.h> +#include <asm/microcode.h> + +MODULE_DESCRIPTION("Microcode Update Driver"); +MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>"); +MODULE_LICENSE("GPL"); + +#define MICROCODE_VERSION "2.00" + +struct microcode_ops *microcode_ops; + +/* no concurrent ->write()s are allowed on /dev/cpu/microcode */ +static DEFINE_MUTEX(microcode_mutex); + +struct ucode_cpu_info ucode_cpu_info[NR_CPUS]; +EXPORT_SYMBOL_GPL(ucode_cpu_info); + +#ifdef CONFIG_MICROCODE_OLD_INTERFACE +static int do_microcode_update(const void __user *buf, size_t size) +{ + cpumask_t old; + int error = 0; + int cpu; + + old = current->cpus_allowed; + + for_each_online_cpu(cpu) { + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + if (!uci->valid) + continue; + + set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); + error = microcode_ops->request_microcode_user(cpu, buf, size); + if (error < 0) + goto out; + if (!error) + microcode_ops->apply_microcode(cpu); + } +out: + set_cpus_allowed_ptr(current, &old); + return error; +} + +static int microcode_open(struct inode *unused1, struct file *unused2) +{ + cycle_kernel_lock(); + return capable(CAP_SYS_RAWIO) ? 0 : -EPERM; +} + +static ssize_t microcode_write(struct file *file, const char __user *buf, + size_t len, loff_t *ppos) +{ + ssize_t ret; + + if ((len >> PAGE_SHIFT) > num_physpages) { + printk(KERN_ERR "microcode: too much data (max %ld pages)\n", + num_physpages); + return -EINVAL; + } + + get_online_cpus(); + mutex_lock(µcode_mutex); + + ret = do_microcode_update(buf, len); + if (!ret) + ret = (ssize_t)len; + + mutex_unlock(µcode_mutex); + put_online_cpus(); + + return ret; +} + +static const struct file_operations microcode_fops = { + .owner = THIS_MODULE, + .write = microcode_write, + .open = microcode_open, +}; + +static struct miscdevice microcode_dev = { + .minor = MICROCODE_MINOR, + .name = "microcode", + .fops = µcode_fops, +}; + +static int __init microcode_dev_init(void) +{ + int error; + + error = misc_register(µcode_dev); + if (error) { + printk(KERN_ERR + "microcode: can't misc_register on minor=%d\n", + MICROCODE_MINOR); + return error; + } + + return 0; +} + +static void microcode_dev_exit(void) +{ + misc_deregister(µcode_dev); +} + +MODULE_ALIAS_MISCDEV(MICROCODE_MINOR); +#else +#define microcode_dev_init() 0 +#define microcode_dev_exit() do { } while (0) +#endif + +/* fake device for request_firmware */ +struct platform_device *microcode_pdev; + +static ssize_t reload_store(struct sys_device *dev, + struct sysdev_attribute *attr, + const char *buf, size_t sz) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + char *end; + unsigned long val = simple_strtoul(buf, &end, 0); + int err = 0; + int cpu = dev->id; + + if (end == buf) + return -EINVAL; + if (val == 1) { + cpumask_t old = current->cpus_allowed; + + get_online_cpus(); + if (cpu_online(cpu)) { + set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); + mutex_lock(µcode_mutex); + if (uci->valid) { + err = microcode_ops->request_microcode_fw(cpu, + µcode_pdev->dev); + if (!err) + microcode_ops->apply_microcode(cpu); + } + mutex_unlock(µcode_mutex); + set_cpus_allowed_ptr(current, &old); + } + put_online_cpus(); + } + if (err) + return err; + return sz; +} + +static ssize_t version_show(struct sys_device *dev, + struct sysdev_attribute *attr, char *buf) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + + return sprintf(buf, "0x%x\n", uci->cpu_sig.rev); +} + +static ssize_t pf_show(struct sys_device *dev, + struct sysdev_attribute *attr, char *buf) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + + return sprintf(buf, "0x%x\n", uci->cpu_sig.pf); +} + +static SYSDEV_ATTR(reload, 0200, NULL, reload_store); +static SYSDEV_ATTR(version, 0400, version_show, NULL); +static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL); + +static struct attribute *mc_default_attrs[] = { + &attr_reload.attr, + &attr_version.attr, + &attr_processor_flags.attr, + NULL +}; + +static struct attribute_group mc_attr_group = { + .attrs = mc_default_attrs, + .name = "microcode", +}; + +static void microcode_fini_cpu(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + mutex_lock(µcode_mutex); + microcode_ops->microcode_fini_cpu(cpu); + uci->valid = 0; + mutex_unlock(µcode_mutex); +} + +static void collect_cpu_info(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + memset(uci, 0, sizeof(*uci)); + if (!microcode_ops->collect_cpu_info(cpu, &uci->cpu_sig)) + uci->valid = 1; +} + +static int microcode_resume_cpu(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + struct cpu_signature nsig; + + pr_debug("microcode: CPU%d resumed\n", cpu); + + if (!uci->mc) + return 1; + + /* + * Let's verify that the 'cached' ucode does belong + * to this cpu (a bit of paranoia): + */ + if (microcode_ops->collect_cpu_info(cpu, &nsig)) { + microcode_fini_cpu(cpu); + return -1; + } + + if (memcmp(&nsig, &uci->cpu_sig, sizeof(nsig))) { + microcode_fini_cpu(cpu); + /* Should we look for a new ucode here? */ + return 1; + } + + return 0; +} + +void microcode_update_cpu(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + int err = 0; + + /* + * Check if the system resume is in progress (uci->valid != NULL), + * otherwise just request a firmware: + */ + if (uci->valid) { + err = microcode_resume_cpu(cpu); + } else { + collect_cpu_info(cpu); + if (uci->valid && system_state == SYSTEM_RUNNING) + err = microcode_ops->request_microcode_fw(cpu, + µcode_pdev->dev); + } + if (!err) + microcode_ops->apply_microcode(cpu); +} + +static void microcode_init_cpu(int cpu) +{ + cpumask_t old = current->cpus_allowed; + + set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); + /* We should bind the task to the CPU */ + BUG_ON(raw_smp_processor_id() != cpu); + + mutex_lock(µcode_mutex); + microcode_update_cpu(cpu); + mutex_unlock(µcode_mutex); + + set_cpus_allowed_ptr(current, &old); +} + +static int mc_sysdev_add(struct sys_device *sys_dev) +{ + int err, cpu = sys_dev->id; + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + if (!cpu_online(cpu)) + return 0; + + pr_debug("microcode: CPU%d added\n", cpu); + memset(uci, 0, sizeof(*uci)); + + err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group); + if (err) + return err; + + microcode_init_cpu(cpu); + return 0; +} + +static int mc_sysdev_remove(struct sys_device *sys_dev) +{ + int cpu = sys_dev->id; + + if (!cpu_online(cpu)) + return 0; + + pr_debug("microcode: CPU%d removed\n", cpu); + microcode_fini_cpu(cpu); + sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); + return 0; +} + +static int mc_sysdev_resume(struct sys_device *dev) +{ + int cpu = dev->id; + + if (!cpu_online(cpu)) + return 0; + + /* only CPU 0 will apply ucode here */ + microcode_update_cpu(0); + return 0; +} + +static struct sysdev_driver mc_sysdev_driver = { + .add = mc_sysdev_add, + .remove = mc_sysdev_remove, + .resume = mc_sysdev_resume, +}; + +static __cpuinit int +mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + struct sys_device *sys_dev; + + sys_dev = get_cpu_sysdev(cpu); + switch (action) { + case CPU_ONLINE: + case CPU_ONLINE_FROZEN: + microcode_init_cpu(cpu); + case CPU_DOWN_FAILED: + case CPU_DOWN_FAILED_FROZEN: + pr_debug("microcode: CPU%d added\n", cpu); + if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group)) + printk(KERN_ERR "microcode: Failed to create the sysfs " + "group for CPU%d\n", cpu); + break; + case CPU_DOWN_PREPARE: + case CPU_DOWN_PREPARE_FROZEN: + /* Suspend is in progress, only remove the interface */ + sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); + pr_debug("microcode: CPU%d removed\n", cpu); + break; + case CPU_DEAD: + case CPU_UP_CANCELED_FROZEN: + /* The CPU refused to come up during a system resume */ + microcode_fini_cpu(cpu); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block __refdata mc_cpu_notifier = { + .notifier_call = mc_cpu_callback, +}; + +static int __init microcode_init(void) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + int error; + + if (c->x86_vendor == X86_VENDOR_INTEL) + microcode_ops = init_intel_microcode(); + else if (c->x86_vendor == X86_VENDOR_AMD) + microcode_ops = init_amd_microcode(); + + if (!microcode_ops) { + printk(KERN_ERR "microcode: no support for this CPU vendor\n"); + return -ENODEV; + } + + error = microcode_dev_init(); + if (error) + return error; + microcode_pdev = platform_device_register_simple("microcode", -1, + NULL, 0); + if (IS_ERR(microcode_pdev)) { + microcode_dev_exit(); + return PTR_ERR(microcode_pdev); + } + + get_online_cpus(); + error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver); + put_online_cpus(); + if (error) { + microcode_dev_exit(); + platform_device_unregister(microcode_pdev); + return error; + } + + register_hotcpu_notifier(&mc_cpu_notifier); + + printk(KERN_INFO + "Microcode Update Driver: v" MICROCODE_VERSION + " <tigran@aivazian.fsnet.co.uk>" + " <peter.oruba@amd.com>\n"); + + return 0; +} + +static void __exit microcode_exit(void) +{ + microcode_dev_exit(); + + unregister_hotcpu_notifier(&mc_cpu_notifier); + + get_online_cpus(); + sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver); + put_online_cpus(); + + platform_device_unregister(microcode_pdev); + + microcode_ops = NULL; + + printk(KERN_INFO + "Microcode Update Driver: v" MICROCODE_VERSION " removed.\n"); +} + +module_init(microcode_init); +module_exit(microcode_exit); |