diff options
Diffstat (limited to 'arch/x86/kernel')
| -rw-r--r-- | arch/x86/kernel/Makefile | 2 | ||||
| -rw-r--r-- | arch/x86/kernel/i8259.c | 368 | ||||
| -rw-r--r-- | arch/x86/kernel/i8259_32.c | 295 | ||||
| -rw-r--r-- | arch/x86/kernel/i8259_64.c | 309 |
4 files changed, 369 insertions, 605 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b472..f71a76ef259 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -18,7 +18,7 @@ CFLAGS_tsc_64.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o +obj-y += setup_$(BITS).o i8259.o i8259_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c new file mode 100644 index 00000000000..2decba6b010 --- /dev/null +++ b/arch/x86/kernel/i8259.c @@ -0,0 +1,368 @@ +#ifdef CONFIG_X86_64 +#include <linux/linkage.h> +#endif /* CONFIG_X86_64 */ +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#ifdef CONFIG_X86_64 +#include <linux/timex.h> +#endif /* CONFIG_X86_64 */ +#include <linux/slab.h> +#include <linux/random.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/sysdev.h> +#include <linux/bitops.h> + +#ifdef CONFIG_X86_64 +#include <asm/acpi.h> +#endif /* CONFIG_X86_64 */ +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/io.h> +#ifndef CONFIG_X86_64 +#include <asm/timer.h> +#else /* CONFIG_X86_64 */ +#include <asm/hw_irq.h> +#endif /* CONFIG_X86_64 */ +#include <asm/pgtable.h> +#include <asm/delay.h> +#include <asm/desc.h> +#include <asm/apic.h> +#ifndef CONFIG_X86_64 +#include <asm/arch_hooks.h> +#endif /* ! CONFIG_X86_64 */ +#include <asm/i8259.h> + +/* + * This is the 'legacy' 8259A Programmable Interrupt Controller, + * present in the majority of PC/AT boxes. + * plus some generic x86 specific things if generic specifics makes + * any sense at all. + */ + +static int i8259A_auto_eoi; +DEFINE_SPINLOCK(i8259A_lock); +static void mask_and_ack_8259A(unsigned int); + +struct irq_chip i8259A_chip = { + .name = "XT-PIC", + .mask = disable_8259A_irq, + .disable = disable_8259A_irq, + .unmask = enable_8259A_irq, + .mask_ack = mask_and_ack_8259A, +}; + +/* + * 8259A PIC functions to handle ISA devices: + */ + +/* + * This contains the irq mask for both 8259A irq controllers, + */ +unsigned int cached_irq_mask = 0xffff; + +/* + * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) + * boards the timer interrupt is not really connected to any IO-APIC pin, + * it's fed to the master 8259A's IR0 line only. + * + * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. + * this 'mixed mode' IRQ handling costs nothing because it's only used + * at IRQ setup time. + */ +unsigned long io_apic_irqs; + +void disable_8259A_irq(unsigned int irq) +{ + unsigned int mask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask |= mask; + if (irq & 8) + outb(cached_slave_mask, PIC_SLAVE_IMR); + else + outb(cached_master_mask, PIC_MASTER_IMR); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +void enable_8259A_irq(unsigned int irq) +{ + unsigned int mask = ~(1 << irq); + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask &= mask; + if (irq & 8) + outb(cached_slave_mask, PIC_SLAVE_IMR); + else + outb(cached_master_mask, PIC_MASTER_IMR); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +int i8259A_irq_pending(unsigned int irq) +{ + unsigned int mask = 1<<irq; + unsigned long flags; + int ret; + + spin_lock_irqsave(&i8259A_lock, flags); + if (irq < 8) + ret = inb(PIC_MASTER_CMD) & mask; + else + ret = inb(PIC_SLAVE_CMD) & (mask >> 8); + spin_unlock_irqrestore(&i8259A_lock, flags); + + return ret; +} + +void make_8259A_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + io_apic_irqs &= ~(1<<irq); + set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq, + "XT"); + enable_irq(irq); +} + +/* + * This function assumes to be called rarely. Switching between + * 8259A registers is slow. + * This has to be protected by the irq controller spinlock + * before being called. + */ +static inline int i8259A_irq_real(unsigned int irq) +{ + int value; + int irqmask = 1<<irq; + + if (irq < 8) { + outb(0x0B,PIC_MASTER_CMD); /* ISR register */ + value = inb(PIC_MASTER_CMD) & irqmask; + outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */ + return value; + } + outb(0x0B,PIC_SLAVE_CMD); /* ISR register */ + value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); + outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + return value; +} + +/* + * Careful! The 8259A is a fragile beast, it pretty + * much _has_ to be done exactly like this (mask it + * first, _then_ send the EOI, and the order of EOI + * to the two 8259s is important! + */ +static void mask_and_ack_8259A(unsigned int irq) +{ + unsigned int irqmask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + /* + * Lightweight spurious IRQ detection. We do not want + * to overdo spurious IRQ handling - it's usually a sign + * of hardware problems, so we only do the checks we can + * do without slowing down good hardware unnecessarily. + * + * Note that IRQ7 and IRQ15 (the two spurious IRQs + * usually resulting from the 8259A-1|2 PICs) occur + * even if the IRQ is masked in the 8259A. Thus we + * can check spurious 8259A IRQs without doing the + * quite slow i8259A_irq_real() call for every IRQ. + * This does not cover 100% of spurious interrupts, + * but should be enough to warn the user that there + * is something bad going on ... + */ + if (cached_irq_mask & irqmask) + goto spurious_8259A_irq; + cached_irq_mask |= irqmask; + +handle_real_irq: + if (irq & 8) { + inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ + outb(cached_slave_mask, PIC_SLAVE_IMR); +#ifndef CONFIG_X86_64 + outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ +#else /* CONFIG_X86_64 */ + /* 'Specific EOI' to slave */ + outb(0x60+(irq&7),PIC_SLAVE_CMD); + /* 'Specific EOI' to master-IRQ2 */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); +#endif /* CONFIG_X86_64 */ + } else { + inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ + outb(cached_master_mask, PIC_MASTER_IMR); +#ifndef CONFIG_X86_64 + outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ +#else /* CONFIG_X86_64 */ + /* 'Specific EOI' to master */ + outb(0x60+irq,PIC_MASTER_CMD); +#endif /* CONFIG_X86_64 */ + } + spin_unlock_irqrestore(&i8259A_lock, flags); + return; + +spurious_8259A_irq: + /* + * this is the slow path - should happen rarely. + */ + if (i8259A_irq_real(irq)) + /* + * oops, the IRQ _is_ in service according to the + * 8259A - not spurious, go handle it. + */ + goto handle_real_irq; + + { + static int spurious_irq_mask; + /* + * At this point we can be sure the IRQ is spurious, + * lets ACK and report it. [once per IRQ] + */ + if (!(spurious_irq_mask & irqmask)) { +#ifndef CONFIG_X86_64 + printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); +#else /* CONFIG_X86_64 */ + printk(KERN_DEBUG + "spurious 8259A interrupt: IRQ%d.\n", irq); +#endif /* CONFIG_X86_64 */ + spurious_irq_mask |= irqmask; + } + atomic_inc(&irq_err_count); + /* + * Theoretically we do not have to handle this IRQ, + * but in Linux this does not cause problems and is + * simpler for us. + */ + goto handle_real_irq; + } +} + +static char irq_trigger[2]; +/** + * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ + */ +static void restore_ELCR(char *trigger) +{ + outb(trigger[0], 0x4d0); + outb(trigger[1], 0x4d1); +} + +static void save_ELCR(char *trigger) +{ + /* IRQ 0,1,2,8,13 are marked as reserved */ + trigger[0] = inb(0x4d0) & 0xF8; + trigger[1] = inb(0x4d1) & 0xDE; +} + +static int i8259A_resume(struct sys_device *dev) +{ + init_8259A(i8259A_auto_eoi); + restore_ELCR(irq_trigger); + return 0; +} + +static int i8259A_suspend(struct sys_device *dev, pm_message_t state) +{ + save_ELCR(irq_trigger); + return 0; +} + +static int i8259A_shutdown(struct sys_device *dev) +{ + /* Put the i8259A into a quiescent state that + * the kernel initialization code can get it + * out of. + */ + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ + return 0; +} + +static struct sysdev_class i8259_sysdev_class = { + .name = "i8259", + .suspend = i8259A_suspend, + .resume = i8259A_resume, + .shutdown = i8259A_shutdown, +}; + +static struct sys_device device_i8259A = { + .id = 0, + .cls = &i8259_sysdev_class, +}; + +static int __init i8259A_init_sysfs(void) +{ + int error = sysdev_class_register(&i8259_sysdev_class); + if (!error) + error = sysdev_register(&device_i8259A); + return error; +} + +device_initcall(i8259A_init_sysfs); + +void init_8259A(int auto_eoi) +{ + unsigned long flags; + + i8259A_auto_eoi = auto_eoi; + + spin_lock_irqsave(&i8259A_lock, flags); + + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ + + /* + * outb_pic - this has to work on a wide range of PC hardware. + */ + outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ +#ifndef CONFIG_X86_64 + outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ + outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ + outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); + /* 8259A-1 (the master) has a slave on IR2 */ + outb_pic(0x04, PIC_MASTER_IMR); +#endif /* CONFIG_X86_64 */ + if (auto_eoi) /* master does Auto EOI */ + outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); + else /* master expects normal EOI */ + outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); + + outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ +#ifndef CONFIG_X86_64 + outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ + outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); + /* 8259A-2 is a slave on master's IR2 */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); + /* (slave's support for AEOI in flat mode is to be investigated) */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); + +#endif /* CONFIG_X86_64 */ + if (auto_eoi) + /* + * In AEOI mode we just have to mask the interrupt + * when acking. + */ + i8259A_chip.mask_ack = disable_8259A_irq; + else + i8259A_chip.mask_ack = mask_and_ack_8259A; + + udelay(100); /* wait for 8259A to initialize */ + + outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ + outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ + + spin_unlock_irqrestore(&i8259A_lock, flags); +} diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c index fe631967d62..d66914287ee 100644 --- a/arch/x86/kernel/i8259_32.c +++ b/arch/x86/kernel/i8259_32.c @@ -21,302 +21,7 @@ #include <asm/arch_hooks.h> #include <asm/i8259.h> -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<<irq; - unsigned long flags; - int ret; - - spin_lock_irqsave(&i8259A_lock, flags); - if (irq < 8) - ret = inb(PIC_MASTER_CMD) & mask; - else - ret = inb(PIC_SLAVE_CMD) & (mask >> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<<irq); - set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq, - "XT"); - enable_irq(irq); -} - -/* - * This function assumes to be called rarely. Switching between - * 8259A registers is slow. - * This has to be protected by the irq controller spinlock - * before being called. - */ -static inline int i8259A_irq_real(unsigned int irq) -{ - int value; - int irqmask = 1<<irq; - - if (irq < 8) { - outb(0x0B,PIC_MASTER_CMD); /* ISR register */ - value = inb(PIC_MASTER_CMD) & irqmask; - outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */ - return value; - } - outb(0x0B,PIC_SLAVE_CMD); /* ISR register */ - value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ - outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} /* * Note that on a 486, we don't want to do a SIGFPE on an irq13 diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index 1870e0e8655..b44095efcf8 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -101,315 +101,6 @@ static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = #undef IRQ #undef IRQLIST_16 -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - * this file should become arch/i386/kernel/irq.c when the old irq.c - * moves to arch independent land - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<<irq; - unsigned long flags; - int ret; - - spin_lock_irqsave(&i8259A_lock, flags); - if (irq < 8) - ret = inb(PIC_MASTER_CMD) & mask; - else - ret = inb(PIC_SLAVE_CMD) & (mask >> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<<irq); - set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq, - "XT"); - enable_irq(irq); -} - -/* - * This function assumes to be called rarely. Switching between - * 8259A registers is slow. - * This has to be protected by the irq controller spinlock - * before being called. - */ -static inline int i8259A_irq_real(unsigned int irq) -{ - int value; - int irqmask = 1<<irq; - - if (irq < 8) { - outb(0x0B,PIC_MASTER_CMD); /* ISR register */ - value = inb(PIC_MASTER_CMD) & irqmask; - outb(0x0A,PIC_MASTER_CMD); /* back to the IRR register */ - return value; - } - outb(0x0B,PIC_SLAVE_CMD); /* ISR register */ - value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; - -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); - /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG - "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ - outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); - /* 8259A-1 (the master) has a slave on IR2 */ - outb_pic(0x04, PIC_MASTER_IMR); - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ - outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); - /* 8259A-2 is a slave on master's IR2 */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); - /* (slave's support for AEOI in flat mode is to be investigated) */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); - - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} - |