aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/lguest/boot.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/lguest/boot.c')
-rw-r--r--arch/x86/lguest/boot.c126
1 files changed, 76 insertions, 50 deletions
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 960a8d9c049..e94a11e42f9 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -107,7 +107,7 @@ static void async_hcall(unsigned long call, unsigned long arg1,
local_irq_save(flags);
if (lguest_data.hcall_status[next_call] != 0xFF) {
/* Table full, so do normal hcall which will flush table. */
- hcall(call, arg1, arg2, arg3);
+ kvm_hypercall3(call, arg1, arg2, arg3);
} else {
lguest_data.hcalls[next_call].arg0 = call;
lguest_data.hcalls[next_call].arg1 = arg1;
@@ -134,13 +134,32 @@ static void async_hcall(unsigned long call, unsigned long arg1,
*
* So, when we're in lazy mode, we call async_hcall() to store the call for
* future processing: */
-static void lazy_hcall(unsigned long call,
+static void lazy_hcall1(unsigned long call,
+ unsigned long arg1)
+{
+ if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
+ kvm_hypercall1(call, arg1);
+ else
+ async_hcall(call, arg1, 0, 0);
+}
+
+static void lazy_hcall2(unsigned long call,
+ unsigned long arg1,
+ unsigned long arg2)
+{
+ if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
+ kvm_hypercall2(call, arg1, arg2);
+ else
+ async_hcall(call, arg1, arg2, 0);
+}
+
+static void lazy_hcall3(unsigned long call,
unsigned long arg1,
unsigned long arg2,
unsigned long arg3)
{
if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
- hcall(call, arg1, arg2, arg3);
+ kvm_hypercall3(call, arg1, arg2, arg3);
else
async_hcall(call, arg1, arg2, arg3);
}
@@ -150,7 +169,7 @@ static void lazy_hcall(unsigned long call,
static void lguest_leave_lazy_mode(void)
{
paravirt_leave_lazy(paravirt_get_lazy_mode());
- hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0);
+ kvm_hypercall0(LHCALL_FLUSH_ASYNC);
}
/*G:033
@@ -173,24 +192,29 @@ static unsigned long save_fl(void)
{
return lguest_data.irq_enabled;
}
+PV_CALLEE_SAVE_REGS_THUNK(save_fl);
/* restore_flags() just sets the flags back to the value given. */
static void restore_fl(unsigned long flags)
{
lguest_data.irq_enabled = flags;
}
+PV_CALLEE_SAVE_REGS_THUNK(restore_fl);
/* Interrupts go off... */
static void irq_disable(void)
{
lguest_data.irq_enabled = 0;
}
+PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
/* Interrupts go on... */
static void irq_enable(void)
{
lguest_data.irq_enabled = X86_EFLAGS_IF;
}
+PV_CALLEE_SAVE_REGS_THUNK(irq_enable);
+
/*:*/
/*M:003 Note that we don't check for outstanding interrupts when we re-enable
* them (or when we unmask an interrupt). This seems to work for the moment,
@@ -224,7 +248,7 @@ static void lguest_write_idt_entry(gate_desc *dt,
/* Keep the local copy up to date. */
native_write_idt_entry(dt, entrynum, g);
/* Tell Host about this new entry. */
- hcall(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1]);
+ kvm_hypercall3(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1]);
}
/* Changing to a different IDT is very rare: we keep the IDT up-to-date every
@@ -236,7 +260,7 @@ static void lguest_load_idt(const struct desc_ptr *desc)
struct desc_struct *idt = (void *)desc->address;
for (i = 0; i < (desc->size+1)/8; i++)
- hcall(LHCALL_LOAD_IDT_ENTRY, i, idt[i].a, idt[i].b);
+ kvm_hypercall3(LHCALL_LOAD_IDT_ENTRY, i, idt[i].a, idt[i].b);
}
/*
@@ -256,8 +280,8 @@ static void lguest_load_idt(const struct desc_ptr *desc)
*/
static void lguest_load_gdt(const struct desc_ptr *desc)
{
- BUG_ON((desc->size+1)/8 != GDT_ENTRIES);
- hcall(LHCALL_LOAD_GDT, __pa(desc->address), GDT_ENTRIES, 0);
+ BUG_ON((desc->size + 1) / 8 != GDT_ENTRIES);
+ kvm_hypercall2(LHCALL_LOAD_GDT, __pa(desc->address), GDT_ENTRIES);
}
/* For a single GDT entry which changes, we do the lazy thing: alter our GDT,
@@ -267,7 +291,7 @@ static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
const void *desc, int type)
{
native_write_gdt_entry(dt, entrynum, desc, type);
- hcall(LHCALL_LOAD_GDT, __pa(dt), GDT_ENTRIES, 0);
+ kvm_hypercall2(LHCALL_LOAD_GDT, __pa(dt), GDT_ENTRIES);
}
/* OK, I lied. There are three "thread local storage" GDT entries which change
@@ -278,8 +302,8 @@ static void lguest_load_tls(struct thread_struct *t, unsigned int cpu)
/* There's one problem which normal hardware doesn't have: the Host
* can't handle us removing entries we're currently using. So we clear
* the GS register here: if it's needed it'll be reloaded anyway. */
- loadsegment(gs, 0);
- lazy_hcall(LHCALL_LOAD_TLS, __pa(&t->tls_array), cpu, 0);
+ lazy_load_gs(0);
+ lazy_hcall2(LHCALL_LOAD_TLS, __pa(&t->tls_array), cpu);
}
/*G:038 That's enough excitement for now, back to ploughing through each of
@@ -377,7 +401,7 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
static unsigned long current_cr0;
static void lguest_write_cr0(unsigned long val)
{
- lazy_hcall(LHCALL_TS, val & X86_CR0_TS, 0, 0);
+ lazy_hcall1(LHCALL_TS, val & X86_CR0_TS);
current_cr0 = val;
}
@@ -391,7 +415,7 @@ static unsigned long lguest_read_cr0(void)
* the vowels have been optimized out. */
static void lguest_clts(void)
{
- lazy_hcall(LHCALL_TS, 0, 0, 0);
+ lazy_hcall1(LHCALL_TS, 0);
current_cr0 &= ~X86_CR0_TS;
}
@@ -413,7 +437,7 @@ static bool cr3_changed = false;
static void lguest_write_cr3(unsigned long cr3)
{
lguest_data.pgdir = cr3;
- lazy_hcall(LHCALL_NEW_PGTABLE, cr3, 0, 0);
+ lazy_hcall1(LHCALL_NEW_PGTABLE, cr3);
cr3_changed = true;
}
@@ -485,11 +509,17 @@ static void lguest_write_cr4(unsigned long val)
* into a process' address space. We set the entry then tell the Host the
* toplevel and address this corresponds to. The Guest uses one pagetable per
* process, so we need to tell the Host which one we're changing (mm->pgd). */
+static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+ lazy_hcall3(LHCALL_SET_PTE, __pa(mm->pgd), addr, ptep->pte_low);
+}
+
static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pteval)
{
*ptep = pteval;
- lazy_hcall(LHCALL_SET_PTE, __pa(mm->pgd), addr, pteval.pte_low);
+ lguest_pte_update(mm, addr, ptep);
}
/* The Guest calls this to set a top-level entry. Again, we set the entry then
@@ -498,8 +528,8 @@ static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
{
*pmdp = pmdval;
- lazy_hcall(LHCALL_SET_PMD, __pa(pmdp)&PAGE_MASK,
- (__pa(pmdp)&(PAGE_SIZE-1))/4, 0);
+ lazy_hcall2(LHCALL_SET_PMD, __pa(pmdp) & PAGE_MASK,
+ (__pa(pmdp) & (PAGE_SIZE - 1)) / 4);
}
/* There are a couple of legacy places where the kernel sets a PTE, but we
@@ -515,7 +545,7 @@ static void lguest_set_pte(pte_t *ptep, pte_t pteval)
{
*ptep = pteval;
if (cr3_changed)
- lazy_hcall(LHCALL_FLUSH_TLB, 1, 0, 0);
+ lazy_hcall1(LHCALL_FLUSH_TLB, 1);
}
/* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
@@ -531,7 +561,7 @@ static void lguest_set_pte(pte_t *ptep, pte_t pteval)
static void lguest_flush_tlb_single(unsigned long addr)
{
/* Simply set it to zero: if it was not, it will fault back in. */
- lazy_hcall(LHCALL_SET_PTE, lguest_data.pgdir, addr, 0);
+ lazy_hcall3(LHCALL_SET_PTE, lguest_data.pgdir, addr, 0);
}
/* This is what happens after the Guest has removed a large number of entries.
@@ -539,7 +569,7 @@ static void lguest_flush_tlb_single(unsigned long addr)
* have changed, ie. virtual addresses below PAGE_OFFSET. */
static void lguest_flush_tlb_user(void)
{
- lazy_hcall(LHCALL_FLUSH_TLB, 0, 0, 0);
+ lazy_hcall1(LHCALL_FLUSH_TLB, 0);
}
/* This is called when the kernel page tables have changed. That's not very
@@ -547,7 +577,7 @@ static void lguest_flush_tlb_user(void)
* slow), so it's worth separating this from the user flushing above. */
static void lguest_flush_tlb_kernel(void)
{
- lazy_hcall(LHCALL_FLUSH_TLB, 1, 0, 0);
+ lazy_hcall1(LHCALL_FLUSH_TLB, 1);
}
/*
@@ -684,7 +714,7 @@ static int lguest_clockevent_set_next_event(unsigned long delta,
}
/* Please wake us this far in the future. */
- hcall(LHCALL_SET_CLOCKEVENT, delta, 0, 0);
+ kvm_hypercall1(LHCALL_SET_CLOCKEVENT, delta);
return 0;
}
@@ -695,7 +725,7 @@ static void lguest_clockevent_set_mode(enum clock_event_mode mode,
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
/* A 0 argument shuts the clock down. */
- hcall(LHCALL_SET_CLOCKEVENT, 0, 0, 0);
+ kvm_hypercall0(LHCALL_SET_CLOCKEVENT);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* This is what we expect. */
@@ -770,8 +800,8 @@ static void lguest_time_init(void)
static void lguest_load_sp0(struct tss_struct *tss,
struct thread_struct *thread)
{
- lazy_hcall(LHCALL_SET_STACK, __KERNEL_DS|0x1, thread->sp0,
- THREAD_SIZE/PAGE_SIZE);
+ lazy_hcall3(LHCALL_SET_STACK, __KERNEL_DS | 0x1, thread->sp0,
+ THREAD_SIZE / PAGE_SIZE);
}
/* Let's just say, I wouldn't do debugging under a Guest. */
@@ -830,20 +860,21 @@ static u32 lguest_apic_safe_wait_icr_idle(void)
return 0;
}
-static struct apic_ops lguest_basic_apic_ops = {
- .read = lguest_apic_read,
- .write = lguest_apic_write,
- .icr_read = lguest_apic_icr_read,
- .icr_write = lguest_apic_icr_write,
- .wait_icr_idle = lguest_apic_wait_icr_idle,
- .safe_wait_icr_idle = lguest_apic_safe_wait_icr_idle,
+static void set_lguest_basic_apic_ops(void)
+{
+ apic->read = lguest_apic_read;
+ apic->write = lguest_apic_write;
+ apic->icr_read = lguest_apic_icr_read;
+ apic->icr_write = lguest_apic_icr_write;
+ apic->wait_icr_idle = lguest_apic_wait_icr_idle;
+ apic->safe_wait_icr_idle = lguest_apic_safe_wait_icr_idle;
};
#endif
/* STOP! Until an interrupt comes in. */
static void lguest_safe_halt(void)
{
- hcall(LHCALL_HALT, 0, 0, 0);
+ kvm_hypercall0(LHCALL_HALT);
}
/* The SHUTDOWN hypercall takes a string to describe what's happening, and
@@ -853,7 +884,8 @@ static void lguest_safe_halt(void)
* rather than virtual addresses, so we use __pa() here. */
static void lguest_power_off(void)
{
- hcall(LHCALL_SHUTDOWN, __pa("Power down"), LGUEST_SHUTDOWN_POWEROFF, 0);
+ kvm_hypercall2(LHCALL_SHUTDOWN, __pa("Power down"),
+ LGUEST_SHUTDOWN_POWEROFF);
}
/*
@@ -863,7 +895,7 @@ static void lguest_power_off(void)
*/
static int lguest_panic(struct notifier_block *nb, unsigned long l, void *p)
{
- hcall(LHCALL_SHUTDOWN, __pa(p), LGUEST_SHUTDOWN_POWEROFF, 0);
+ kvm_hypercall2(LHCALL_SHUTDOWN, __pa(p), LGUEST_SHUTDOWN_POWEROFF);
/* The hcall won't return, but to keep gcc happy, we're "done". */
return NOTIFY_DONE;
}
@@ -904,7 +936,7 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count)
len = sizeof(scratch) - 1;
scratch[len] = '\0';
memcpy(scratch, buf, len);
- hcall(LHCALL_NOTIFY, __pa(scratch), 0, 0);
+ kvm_hypercall1(LHCALL_NOTIFY, __pa(scratch));
/* This routine returns the number of bytes actually written. */
return len;
@@ -914,7 +946,7 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count)
* Launcher to reboot us. */
static void lguest_restart(char *reason)
{
- hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0);
+ kvm_hypercall2(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART);
}
/*G:050
@@ -991,10 +1023,10 @@ __init void lguest_init(void)
/* interrupt-related operations */
pv_irq_ops.init_IRQ = lguest_init_IRQ;
- pv_irq_ops.save_fl = save_fl;
- pv_irq_ops.restore_fl = restore_fl;
- pv_irq_ops.irq_disable = irq_disable;
- pv_irq_ops.irq_enable = irq_enable;
+ pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl);
+ pv_irq_ops.restore_fl = PV_CALLEE_SAVE(restore_fl);
+ pv_irq_ops.irq_disable = PV_CALLEE_SAVE(irq_disable);
+ pv_irq_ops.irq_enable = PV_CALLEE_SAVE(irq_enable);
pv_irq_ops.safe_halt = lguest_safe_halt;
/* init-time operations */
@@ -1034,10 +1066,12 @@ __init void lguest_init(void)
pv_mmu_ops.read_cr3 = lguest_read_cr3;
pv_mmu_ops.lazy_mode.enter = paravirt_enter_lazy_mmu;
pv_mmu_ops.lazy_mode.leave = lguest_leave_lazy_mode;
+ pv_mmu_ops.pte_update = lguest_pte_update;
+ pv_mmu_ops.pte_update_defer = lguest_pte_update;
#ifdef CONFIG_X86_LOCAL_APIC
/* apic read/write intercepts */
- apic_ops = &lguest_basic_apic_ops;
+ set_lguest_basic_apic_ops();
#endif
/* time operations */
@@ -1052,14 +1086,6 @@ __init void lguest_init(void)
* lguest_init() where the rest of the fairly chaotic boot setup
* occurs. */
- /* The native boot code sets up initial page tables immediately after
- * the kernel itself, and sets init_pg_tables_end so they're not
- * clobbered. The Launcher places our initial pagetables somewhere at
- * the top of our physical memory, so we don't need extra space: set
- * init_pg_tables_end to the end of the kernel. */
- init_pg_tables_start = __pa(pg0);
- init_pg_tables_end = __pa(pg0);
-
/* As described in head_32.S, we map the first 128M of memory. */
max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-12 08:27:20 +0000