aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/lguest/boot.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/lguest/boot.c')
-rw-r--r--arch/x86/lguest/boot.c176
1 files changed, 126 insertions, 50 deletions
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 33a93b41739..7bc65f0f62c 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -87,7 +87,7 @@ struct lguest_data lguest_data = {
/*G:037 async_hcall() is pretty simple: I'm quite proud of it really. We have a
* ring buffer of stored hypercalls which the Host will run though next time we
- * do a normal hypercall. Each entry in the ring has 4 slots for the hypercall
+ * do a normal hypercall. Each entry in the ring has 5 slots for the hypercall
* arguments, and a "hcall_status" word which is 0 if the call is ready to go,
* and 255 once the Host has finished with it.
*
@@ -96,7 +96,8 @@ struct lguest_data lguest_data = {
* effect of causing the Host to run all the stored calls in the ring buffer
* which empties it for next time! */
static void async_hcall(unsigned long call, unsigned long arg1,
- unsigned long arg2, unsigned long arg3)
+ unsigned long arg2, unsigned long arg3,
+ unsigned long arg4)
{
/* Note: This code assumes we're uniprocessor. */
static unsigned int next_call;
@@ -108,12 +109,13 @@ static void async_hcall(unsigned long call, unsigned long arg1,
local_irq_save(flags);
if (lguest_data.hcall_status[next_call] != 0xFF) {
/* Table full, so do normal hcall which will flush table. */
- kvm_hypercall3(call, arg1, arg2, arg3);
+ kvm_hypercall4(call, arg1, arg2, arg3, arg4);
} else {
lguest_data.hcalls[next_call].arg0 = call;
lguest_data.hcalls[next_call].arg1 = arg1;
lguest_data.hcalls[next_call].arg2 = arg2;
lguest_data.hcalls[next_call].arg3 = arg3;
+ lguest_data.hcalls[next_call].arg4 = arg4;
/* Arguments must all be written before we mark it to go */
wmb();
lguest_data.hcall_status[next_call] = 0;
@@ -141,7 +143,7 @@ static void lazy_hcall1(unsigned long call,
if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
kvm_hypercall1(call, arg1);
else
- async_hcall(call, arg1, 0, 0);
+ async_hcall(call, arg1, 0, 0, 0);
}
static void lazy_hcall2(unsigned long call,
@@ -151,7 +153,7 @@ static void lazy_hcall2(unsigned long call,
if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
kvm_hypercall2(call, arg1, arg2);
else
- async_hcall(call, arg1, arg2, 0);
+ async_hcall(call, arg1, arg2, 0, 0);
}
static void lazy_hcall3(unsigned long call,
@@ -162,18 +164,38 @@ static void lazy_hcall3(unsigned long call,
if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
kvm_hypercall3(call, arg1, arg2, arg3);
else
- async_hcall(call, arg1, arg2, arg3);
+ async_hcall(call, arg1, arg2, arg3, 0);
+}
+
+#ifdef CONFIG_X86_PAE
+static void lazy_hcall4(unsigned long call,
+ unsigned long arg1,
+ unsigned long arg2,
+ unsigned long arg3,
+ unsigned long arg4)
+{
+ if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
+ kvm_hypercall4(call, arg1, arg2, arg3, arg4);
+ else
+ async_hcall(call, arg1, arg2, arg3, arg4);
}
+#endif
/* When lazy mode is turned off reset the per-cpu lazy mode variable and then
* issue the do-nothing hypercall to flush any stored calls. */
-static void lguest_leave_lazy_mode(void)
+static void lguest_leave_lazy_mmu_mode(void)
+{
+ kvm_hypercall0(LHCALL_FLUSH_ASYNC);
+ paravirt_leave_lazy_mmu();
+}
+
+static void lguest_end_context_switch(struct task_struct *next)
{
- paravirt_leave_lazy(paravirt_get_lazy_mode());
kvm_hypercall0(LHCALL_FLUSH_ASYNC);
+ paravirt_end_context_switch(next);
}
-/*G:033
+/*G:032
* After that diversion we return to our first native-instruction
* replacements: four functions for interrupt control.
*
@@ -193,30 +215,28 @@ static unsigned long save_fl(void)
{
return lguest_data.irq_enabled;
}
-PV_CALLEE_SAVE_REGS_THUNK(save_fl);
-
-/* restore_flags() just sets the flags back to the value given. */
-static void restore_fl(unsigned long flags)
-{
- lguest_data.irq_enabled = flags;
-}
-PV_CALLEE_SAVE_REGS_THUNK(restore_fl);
/* Interrupts go off... */
static void irq_disable(void)
{
lguest_data.irq_enabled = 0;
}
+
+/* Let's pause a moment. Remember how I said these are called so often?
+ * Jeremy Fitzhardinge optimized them so hard early in 2009 that he had to
+ * break some rules. In particular, these functions are assumed to save their
+ * own registers if they need to: normal C functions assume they can trash the
+ * eax register. To use normal C functions, we use
+ * PV_CALLEE_SAVE_REGS_THUNK(), which pushes %eax onto the stack, calls the
+ * C function, then restores it. */
+PV_CALLEE_SAVE_REGS_THUNK(save_fl);
PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
+/*:*/
-/* Interrupts go on... */
-static void irq_enable(void)
-{
- lguest_data.irq_enabled = X86_EFLAGS_IF;
-}
-PV_CALLEE_SAVE_REGS_THUNK(irq_enable);
+/* These are in i386_head.S */
+extern void lg_irq_enable(void);
+extern void lg_restore_fl(unsigned long flags);
-/*:*/
/*M:003 Note that we don't check for outstanding interrupts when we re-enable
* them (or when we unmask an interrupt). This seems to work for the moment,
* since interrupts are rare and we'll just get the interrupt on the next timer
@@ -362,8 +382,8 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
case 1: /* Basic feature request. */
/* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
*cx &= 0x00002201;
- /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU. */
- *dx &= 0x07808111;
+ /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU, PAE. */
+ *dx &= 0x07808151;
/* The Host can do a nice optimization if it knows that the
* kernel mappings (addresses above 0xC0000000 or whatever
* PAGE_OFFSET is set to) haven't changed. But Linux calls
@@ -382,6 +402,11 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
if (*ax > 0x80000008)
*ax = 0x80000008;
break;
+ case 0x80000001:
+ /* Here we should fix nx cap depending on host. */
+ /* For this version of PAE, we just clear NX bit. */
+ *dx &= ~(1 << 20);
+ break;
}
}
@@ -515,25 +540,52 @@ static void lguest_write_cr4(unsigned long val)
static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
pte_t *ptep)
{
+#ifdef CONFIG_X86_PAE
+ lazy_hcall4(LHCALL_SET_PTE, __pa(mm->pgd), addr,
+ ptep->pte_low, ptep->pte_high);
+#else
lazy_hcall3(LHCALL_SET_PTE, __pa(mm->pgd), addr, ptep->pte_low);
+#endif
}
static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pteval)
{
- *ptep = pteval;
+ native_set_pte(ptep, pteval);
lguest_pte_update(mm, addr, ptep);
}
-/* The Guest calls this to set a top-level entry. Again, we set the entry then
- * tell the Host which top-level page we changed, and the index of the entry we
- * changed. */
+/* The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
+ * to set a middle-level entry when PAE is activated.
+ * Again, we set the entry then tell the Host which page we changed,
+ * and the index of the entry we changed. */
+#ifdef CONFIG_X86_PAE
+static void lguest_set_pud(pud_t *pudp, pud_t pudval)
+{
+ native_set_pud(pudp, pudval);
+
+ /* 32 bytes aligned pdpt address and the index. */
+ lazy_hcall2(LHCALL_SET_PGD, __pa(pudp) & 0xFFFFFFE0,
+ (__pa(pudp) & 0x1F) / sizeof(pud_t));
+}
+
static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
{
- *pmdp = pmdval;
+ native_set_pmd(pmdp, pmdval);
lazy_hcall2(LHCALL_SET_PMD, __pa(pmdp) & PAGE_MASK,
- (__pa(pmdp) & (PAGE_SIZE - 1)) / 4);
+ (__pa(pmdp) & (PAGE_SIZE - 1)) / sizeof(pmd_t));
+}
+#else
+
+/* The Guest calls lguest_set_pmd to set a top-level entry when PAE is not
+ * activated. */
+static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
+{
+ native_set_pmd(pmdp, pmdval);
+ lazy_hcall2(LHCALL_SET_PGD, __pa(pmdp) & PAGE_MASK,
+ (__pa(pmdp) & (PAGE_SIZE - 1)) / sizeof(pmd_t));
}
+#endif
/* There are a couple of legacy places where the kernel sets a PTE, but we
* don't know the top level any more. This is useless for us, since we don't
@@ -546,11 +598,31 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
* which brings boot back to 0.25 seconds. */
static void lguest_set_pte(pte_t *ptep, pte_t pteval)
{
- *ptep = pteval;
+ native_set_pte(ptep, pteval);
+ if (cr3_changed)
+ lazy_hcall1(LHCALL_FLUSH_TLB, 1);
+}
+
+#ifdef CONFIG_X86_PAE
+static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+ native_set_pte_atomic(ptep, pte);
if (cr3_changed)
lazy_hcall1(LHCALL_FLUSH_TLB, 1);
}
+void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+ native_pte_clear(mm, addr, ptep);
+ lguest_pte_update(mm, addr, ptep);
+}
+
+void lguest_pmd_clear(pmd_t *pmdp)
+{
+ lguest_set_pmd(pmdp, __pmd(0));
+}
+#endif
+
/* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
* native page table operations. On native hardware you can set a new page
* table entry whenever you want, but if you want to remove one you have to do
@@ -622,13 +694,12 @@ static void __init lguest_init_IRQ(void)
{
unsigned int i;
- for (i = 0; i < LGUEST_IRQS; i++) {
- int vector = FIRST_EXTERNAL_VECTOR + i;
+ for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
/* Some systems map "vectors" to interrupts weirdly. Lguest has
* a straightforward 1 to 1 mapping, so force that here. */
- __get_cpu_var(vector_irq)[vector] = i;
- if (vector != SYSCALL_VECTOR)
- set_intr_gate(vector, interrupt[i]);
+ __get_cpu_var(vector_irq)[i] = i - FIRST_EXTERNAL_VECTOR;
+ if (i != SYSCALL_VECTOR)
+ set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
}
/* This call is required to set up for 4k stacks, where we have
* separate stacks for hard and soft interrupts. */
@@ -637,7 +708,7 @@ static void __init lguest_init_IRQ(void)
void lguest_setup_irq(unsigned int irq)
{
- irq_to_desc_alloc_cpu(irq, 0);
+ irq_to_desc_alloc_node(irq, 0);
set_irq_chip_and_handler_name(irq, &lguest_irq_controller,
handle_level_irq, "level");
}
@@ -967,10 +1038,10 @@ static void lguest_restart(char *reason)
*
* Our current solution is to allow the paravirt back end to optionally patch
* over the indirect calls to replace them with something more efficient. We
- * patch the four most commonly called functions: disable interrupts, enable
- * interrupts, restore interrupts and save interrupts. We usually have 6 or 10
- * bytes to patch into: the Guest versions of these operations are small enough
- * that we can fit comfortably.
+ * patch two of the simplest of the most commonly called functions: disable
+ * interrupts and save interrupts. We usually have 6 or 10 bytes to patch
+ * into: the Guest versions of these operations are small enough that we can
+ * fit comfortably.
*
* First we need assembly templates of each of the patchable Guest operations,
* and these are in i386_head.S. */
@@ -981,8 +1052,6 @@ static const struct lguest_insns
const char *start, *end;
} lguest_insns[] = {
[PARAVIRT_PATCH(pv_irq_ops.irq_disable)] = { lgstart_cli, lgend_cli },
- [PARAVIRT_PATCH(pv_irq_ops.irq_enable)] = { lgstart_sti, lgend_sti },
- [PARAVIRT_PATCH(pv_irq_ops.restore_fl)] = { lgstart_popf, lgend_popf },
[PARAVIRT_PATCH(pv_irq_ops.save_fl)] = { lgstart_pushf, lgend_pushf },
};
@@ -1020,6 +1089,7 @@ __init void lguest_init(void)
pv_info.name = "lguest";
pv_info.paravirt_enabled = 1;
pv_info.kernel_rpl = 1;
+ pv_info.shared_kernel_pmd = 1;
/* We set up all the lguest overrides for sensitive operations. These
* are detailed with the operations themselves. */
@@ -1027,9 +1097,9 @@ __init void lguest_init(void)
/* interrupt-related operations */
pv_irq_ops.init_IRQ = lguest_init_IRQ;
pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl);
- pv_irq_ops.restore_fl = PV_CALLEE_SAVE(restore_fl);
+ pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(lg_restore_fl);
pv_irq_ops.irq_disable = PV_CALLEE_SAVE(irq_disable);
- pv_irq_ops.irq_enable = PV_CALLEE_SAVE(irq_enable);
+ pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(lg_irq_enable);
pv_irq_ops.safe_halt = lguest_safe_halt;
/* init-time operations */
@@ -1054,8 +1124,8 @@ __init void lguest_init(void)
pv_cpu_ops.write_gdt_entry = lguest_write_gdt_entry;
pv_cpu_ops.write_idt_entry = lguest_write_idt_entry;
pv_cpu_ops.wbinvd = lguest_wbinvd;
- pv_cpu_ops.lazy_mode.enter = paravirt_enter_lazy_cpu;
- pv_cpu_ops.lazy_mode.leave = lguest_leave_lazy_mode;
+ pv_cpu_ops.start_context_switch = paravirt_start_context_switch;
+ pv_cpu_ops.end_context_switch = lguest_end_context_switch;
/* pagetable management */
pv_mmu_ops.write_cr3 = lguest_write_cr3;
@@ -1065,10 +1135,16 @@ __init void lguest_init(void)
pv_mmu_ops.set_pte = lguest_set_pte;
pv_mmu_ops.set_pte_at = lguest_set_pte_at;
pv_mmu_ops.set_pmd = lguest_set_pmd;
+#ifdef CONFIG_X86_PAE
+ pv_mmu_ops.set_pte_atomic = lguest_set_pte_atomic;
+ pv_mmu_ops.pte_clear = lguest_pte_clear;
+ pv_mmu_ops.pmd_clear = lguest_pmd_clear;
+ pv_mmu_ops.set_pud = lguest_set_pud;
+#endif
pv_mmu_ops.read_cr2 = lguest_read_cr2;
pv_mmu_ops.read_cr3 = lguest_read_cr3;
pv_mmu_ops.lazy_mode.enter = paravirt_enter_lazy_mmu;
- pv_mmu_ops.lazy_mode.leave = lguest_leave_lazy_mode;
+ pv_mmu_ops.lazy_mode.leave = lguest_leave_lazy_mmu_mode;
pv_mmu_ops.pte_update = lguest_pte_update;
pv_mmu_ops.pte_update_defer = lguest_pte_update;