diff options
Diffstat (limited to 'arch/x86/mm/srat_64.c')
-rw-r--r-- | arch/x86/mm/srat_64.c | 98 |
1 files changed, 17 insertions, 81 deletions
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 01765955baa..2dfcbf9df2a 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -31,17 +31,11 @@ static nodemask_t nodes_parsed __initdata; static nodemask_t cpu_nodes_parsed __initdata; static struct bootnode nodes[MAX_NUMNODES] __initdata; static struct bootnode nodes_add[MAX_NUMNODES]; -static int found_add_area __initdata; -int hotadd_percent __initdata = 0; static int num_node_memblks __initdata; static struct bootnode node_memblk_range[NR_NODE_MEMBLKS] __initdata; static int memblk_nodeid[NR_NODE_MEMBLKS] __initdata; -/* Too small nodes confuse the VM badly. Usually they result - from BIOS bugs. */ -#define NODE_MIN_SIZE (4*1024*1024) - static __init int setup_node(int pxm) { return acpi_map_pxm_to_node(pxm); @@ -66,9 +60,6 @@ static __init void cutoff_node(int i, unsigned long start, unsigned long end) { struct bootnode *nd = &nodes[i]; - if (found_add_area) - return; - if (nd->start < start) { nd->start = start; if (nd->end < nd->start) @@ -86,7 +77,6 @@ static __init void bad_srat(void) int i; printk(KERN_ERR "SRAT: SRAT not used.\n"); acpi_numa = -1; - found_add_area = 0; for (i = 0; i < MAX_LOCAL_APIC; i++) apicid_to_node[i] = NUMA_NO_NODE; for (i = 0; i < MAX_NUMNODES; i++) @@ -182,24 +172,21 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) pxm, apic_id, node); } -static int update_end_of_memory(unsigned long end) {return -1;} -static int hotadd_enough_memory(struct bootnode *nd) {return 1;} #ifdef CONFIG_MEMORY_HOTPLUG_SPARSE static inline int save_add_info(void) {return 1;} #else static inline int save_add_info(void) {return 0;} #endif /* - * Update nodes_add and decide if to include add are in the zone. - * Both SPARSE and RESERVE need nodes_add information. - * This code supports one contiguous hot add area per node. + * Update nodes_add[] + * This code supports one contiguous hot add area per node */ -static int __init -reserve_hotadd(int node, unsigned long start, unsigned long end) +static void __init +update_nodes_add(int node, unsigned long start, unsigned long end) { unsigned long s_pfn = start >> PAGE_SHIFT; unsigned long e_pfn = end >> PAGE_SHIFT; - int ret = 0, changed = 0; + int changed = 0; struct bootnode *nd = &nodes_add[node]; /* I had some trouble with strange memory hotadd regions breaking @@ -210,7 +197,7 @@ reserve_hotadd(int node, unsigned long start, unsigned long end) mistakes */ if ((signed long)(end - start) < NODE_MIN_SIZE) { printk(KERN_ERR "SRAT: Hotplug area too small\n"); - return -1; + return; } /* This check might be a bit too strict, but I'm keeping it for now. */ @@ -218,12 +205,7 @@ reserve_hotadd(int node, unsigned long start, unsigned long end) printk(KERN_ERR "SRAT: Hotplug area %lu -> %lu has existing memory\n", s_pfn, e_pfn); - return -1; - } - - if (!hotadd_enough_memory(&nodes_add[node])) { - printk(KERN_ERR "SRAT: Hotplug area too large\n"); - return -1; + return; } /* Looks good */ @@ -245,11 +227,9 @@ reserve_hotadd(int node, unsigned long start, unsigned long end) printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n"); } - ret = update_end_of_memory(nd->end); - if (changed) - printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n", nd->start, nd->end); - return ret; + printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n", + nd->start, nd->end); } /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ @@ -310,13 +290,10 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) start, end); e820_register_active_regions(node, start >> PAGE_SHIFT, end >> PAGE_SHIFT); - push_node_boundaries(node, nd->start >> PAGE_SHIFT, - nd->end >> PAGE_SHIFT); - if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && - (reserve_hotadd(node, start, end) < 0)) { - /* Ignore hotadd region. Undo damage */ - printk(KERN_NOTICE "SRAT: Hotplug region ignored\n"); + if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) { + update_nodes_add(node, start, end); + /* restore nodes[node] */ *nd = oldnode; if ((nd->start | nd->end) == 0) node_clear(node, nodes_parsed); @@ -345,9 +322,9 @@ static int __init nodes_cover_memory(const struct bootnode *nodes) pxmram = 0; } - e820ram = max_pfn - absent_pages_in_range(0, max_pfn); - /* We seem to lose 3 pages somewhere. Allow a bit of slack. */ - if ((long)(e820ram - pxmram) >= 1*1024*1024) { + e820ram = max_pfn - (e820_hole_size(0, max_pfn<<PAGE_SHIFT)>>PAGE_SHIFT); + /* We seem to lose 3 pages somewhere. Allow 1M of slack. */ + if ((long)(e820ram - pxmram) >= (1<<(20 - PAGE_SHIFT))) { printk(KERN_ERR "SRAT: PXMs only cover %luMB of your %luMB e820 RAM. Not used.\n", (pxmram << PAGE_SHIFT) >> 20, @@ -357,17 +334,6 @@ static int __init nodes_cover_memory(const struct bootnode *nodes) return 1; } -static void __init unparse_node(int node) -{ - int i; - node_clear(node, nodes_parsed); - node_clear(node, cpu_nodes_parsed); - for (i = 0; i < MAX_LOCAL_APIC; i++) { - if (apicid_to_node[i] == node) - apicid_to_node[i] = NUMA_NO_NODE; - } -} - void __init acpi_numa_arch_fixup(void) {} /* Use the information discovered above to actually set up the nodes. */ @@ -379,18 +345,8 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) return -1; /* First clean up the node list */ - for (i = 0; i < MAX_NUMNODES; i++) { + for (i = 0; i < MAX_NUMNODES; i++) cutoff_node(i, start, end); - /* - * don't confuse VM with a node that doesn't have the - * minimum memory. - */ - if (nodes[i].end && - (nodes[i].end - nodes[i].start) < NODE_MIN_SIZE) { - unparse_node(i); - node_set_offline(i); - } - } if (!nodes_cover_memory(nodes)) { bad_srat(); @@ -423,7 +379,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) if (node == NUMA_NO_NODE) continue; - if (!node_isset(node, node_possible_map)) + if (!node_online(node)) numa_clear_node(i); } numa_init_array(); @@ -510,26 +466,6 @@ static int null_slit_node_compare(int a, int b) } #endif /* CONFIG_NUMA_EMU */ -void __init srat_reserve_add_area(int nodeid) -{ - if (found_add_area && nodes_add[nodeid].end) { - u64 total_mb; - - printk(KERN_INFO "SRAT: Reserving hot-add memory space " - "for node %d at %Lx-%Lx\n", - nodeid, nodes_add[nodeid].start, nodes_add[nodeid].end); - total_mb = (nodes_add[nodeid].end - nodes_add[nodeid].start) - >> PAGE_SHIFT; - total_mb *= sizeof(struct page); - total_mb >>= 20; - printk(KERN_INFO "SRAT: This will cost you %Lu MB of " - "pre-allocated memory.\n", (unsigned long long)total_mb); - reserve_bootmem_node(NODE_DATA(nodeid), nodes_add[nodeid].start, - nodes_add[nodeid].end - nodes_add[nodeid].start, - BOOTMEM_DEFAULT); - } -} - int __node_distance(int a, int b) { int index; |