diff options
Diffstat (limited to 'arch/x86')
-rw-r--r-- | arch/x86/kernel/apic_64.c | 1 | ||||
-rw-r--r-- | arch/x86/kernel/io_apic_64.c | 300 |
2 files changed, 279 insertions, 22 deletions
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index a969ef78e12..d5c06917b5b 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -46,6 +46,7 @@ static int disable_apic_timer __cpuinitdata; static int apic_calibrate_pmtmr __initdata; int disable_apic; +int x2apic; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index b62d42ef928..9bd02ef049a 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -37,6 +37,7 @@ #include <acpi/acpi_bus.h> #endif #include <linux/bootmem.h> +#include <linux/dmar.h> #include <asm/idle.h> #include <asm/io.h> @@ -48,6 +49,7 @@ #include <asm/nmi.h> #include <asm/msidef.h> #include <asm/hypertransport.h> +#include <asm/irq_remapping.h> #include <mach_ipi.h> #include <mach_apic.h> @@ -312,7 +314,12 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector) pin = entry->pin; if (pin == -1) break; - io_apic_write(apic, 0x11 + pin*2, dest); + /* + * With interrupt-remapping, destination information comes + * from interrupt-remapping table entry. + */ + if (!irq_remapped(irq)) + io_apic_write(apic, 0x11 + pin*2, dest); reg = io_apic_read(apic, 0x10 + pin*2); reg &= ~IO_APIC_REDIR_VECTOR_MASK; reg |= vector; @@ -906,18 +913,98 @@ void setup_vector_irq(int cpu) static struct irq_chip ioapic_chip; +#ifdef CONFIG_INTR_REMAP +static struct irq_chip ir_ioapic_chip; +#endif static void ioapic_register_intr(int irq, unsigned long trigger) { - if (trigger) { + if (trigger) irq_desc[irq].status |= IRQ_LEVEL; - set_irq_chip_and_handler_name(irq, &ioapic_chip, - handle_fasteoi_irq, "fasteoi"); - } else { + else irq_desc[irq].status &= ~IRQ_LEVEL; + +#ifdef CONFIG_INTR_REMAP + if (irq_remapped(irq)) { + irq_desc[irq].status |= IRQ_MOVE_PCNTXT; + if (trigger) + set_irq_chip_and_handler_name(irq, &ir_ioapic_chip, + handle_fasteoi_irq, + "fasteoi"); + else + set_irq_chip_and_handler_name(irq, &ir_ioapic_chip, + handle_edge_irq, "edge"); + return; + } +#endif + if (trigger) + set_irq_chip_and_handler_name(irq, &ioapic_chip, + handle_fasteoi_irq, + "fasteoi"); + else set_irq_chip_and_handler_name(irq, &ioapic_chip, handle_edge_irq, "edge"); +} + +static int setup_ioapic_entry(int apic, int irq, + struct IO_APIC_route_entry *entry, + unsigned int destination, int trigger, + int polarity, int vector) +{ + /* + * add it to the IO-APIC irq-routing table: + */ + memset(entry,0,sizeof(*entry)); + +#ifdef CONFIG_INTR_REMAP + if (intr_remapping_enabled) { + struct intel_iommu *iommu = map_ioapic_to_ir(apic); + struct irte irte; + struct IR_IO_APIC_route_entry *ir_entry = + (struct IR_IO_APIC_route_entry *) entry; + int index; + + if (!iommu) + panic("No mapping iommu for ioapic %d\n", apic); + + index = alloc_irte(iommu, irq, 1); + if (index < 0) + panic("Failed to allocate IRTE for ioapic %d\n", apic); + + memset(&irte, 0, sizeof(irte)); + + irte.present = 1; + irte.dst_mode = INT_DEST_MODE; + irte.trigger_mode = trigger; + irte.dlvry_mode = INT_DELIVERY_MODE; + irte.vector = vector; + irte.dest_id = IRTE_DEST(destination); + + modify_irte(irq, &irte); + + ir_entry->index2 = (index >> 15) & 0x1; + ir_entry->zero = 0; + ir_entry->format = 1; + ir_entry->index = (index & 0x7fff); + } else +#endif + { + entry->delivery_mode = INT_DELIVERY_MODE; + entry->dest_mode = INT_DEST_MODE; + entry->dest = destination; } + + entry->mask = 0; /* enable IRQ */ + entry->trigger = trigger; + entry->polarity = polarity; + entry->vector = vector; + + /* Mask level triggered irqs. + * Use IRQ_DELAYED_DISABLE for edge triggered irqs. + */ + if (trigger) + entry->mask = 1; + return 0; } static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, @@ -942,24 +1029,15 @@ static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector, irq, trigger, polarity); - /* - * add it to the IO-APIC irq-routing table: - */ - memset(&entry,0,sizeof(entry)); - - entry.delivery_mode = INT_DELIVERY_MODE; - entry.dest_mode = INT_DEST_MODE; - entry.dest = cpu_mask_to_apicid(mask); - entry.mask = 0; /* enable IRQ */ - entry.trigger = trigger; - entry.polarity = polarity; - entry.vector = cfg->vector; - /* Mask level triggered irqs. - * Use IRQ_DELAYED_DISABLE for edge triggered irqs. - */ - if (trigger) - entry.mask = 1; + if (setup_ioapic_entry(mp_ioapics[apic].mp_apicid, irq, &entry, + cpu_mask_to_apicid(mask), trigger, polarity, + cfg->vector)) { + printk("Failed to setup ioapic entry for ioapic %d, pin %d\n", + mp_ioapics[apic].mp_apicid, pin); + __clear_irq_vector(irq); + return; + } ioapic_register_intr(irq, trigger); if (irq < 16) @@ -1011,6 +1089,9 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, { struct IO_APIC_route_entry entry; + if (intr_remapping_enabled) + return; + memset(&entry, 0, sizeof(entry)); /* @@ -1466,6 +1547,147 @@ static int ioapic_retrigger_irq(unsigned int irq) */ #ifdef CONFIG_SMP + +#ifdef CONFIG_INTR_REMAP +static void ir_irq_migration(struct work_struct *work); + +static DECLARE_DELAYED_WORK(ir_migration_work, ir_irq_migration); + +/* + * Migrate the IO-APIC irq in the presence of intr-remapping. + * + * For edge triggered, irq migration is a simple atomic update(of vector + * and cpu destination) of IRTE and flush the hardware cache. + * + * For level triggered, we need to modify the io-apic RTE aswell with the update + * vector information, along with modifying IRTE with vector and destination. + * So irq migration for level triggered is little bit more complex compared to + * edge triggered migration. But the good news is, we use the same algorithm + * for level triggered migration as we have today, only difference being, + * we now initiate the irq migration from process context instead of the + * interrupt context. + * + * In future, when we do a directed EOI (combined with cpu EOI broadcast + * suppression) to the IO-APIC, level triggered irq migration will also be + * as simple as edge triggered migration and we can do the irq migration + * with a simple atomic update to IO-APIC RTE. + */ +static void migrate_ioapic_irq(int irq, cpumask_t mask) +{ + struct irq_cfg *cfg = irq_cfg + irq; + struct irq_desc *desc = irq_desc + irq; + cpumask_t tmp, cleanup_mask; + struct irte irte; + int modify_ioapic_rte = desc->status & IRQ_LEVEL; + unsigned int dest; + unsigned long flags; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + return; + + if (get_irte(irq, &irte)) + return; + + if (assign_irq_vector(irq, mask)) + return; + + cpus_and(tmp, cfg->domain, mask); + dest = cpu_mask_to_apicid(tmp); + + if (modify_ioapic_rte) { + spin_lock_irqsave(&ioapic_lock, flags); + __target_IO_APIC_irq(irq, dest, cfg->vector); + spin_unlock_irqrestore(&ioapic_lock, flags); + } + + irte.vector = cfg->vector; + irte.dest_id = IRTE_DEST(dest); + + /* + * Modified the IRTE and flushes the Interrupt entry cache. + */ + modify_irte(irq, &irte); + + if (cfg->move_in_progress) { + cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map); + cfg->move_cleanup_count = cpus_weight(cleanup_mask); + send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); + cfg->move_in_progress = 0; + } + + irq_desc[irq].affinity = mask; +} + +static int migrate_irq_remapped_level(int irq) +{ + int ret = -1; + + mask_IO_APIC_irq(irq); + + if (io_apic_level_ack_pending(irq)) { + /* + * Interrupt in progress. Migrating irq now will change the + * vector information in the IO-APIC RTE and that will confuse + * the EOI broadcast performed by cpu. + * So, delay the irq migration to the next instance. + */ + schedule_delayed_work(&ir_migration_work, 1); + goto unmask; + } + + /* everthing is clear. we have right of way */ + migrate_ioapic_irq(irq, irq_desc[irq].pending_mask); + + ret = 0; + irq_desc[irq].status &= ~IRQ_MOVE_PENDING; + cpus_clear(irq_desc[irq].pending_mask); + +unmask: + unmask_IO_APIC_irq(irq); + return ret; +} + +static void ir_irq_migration(struct work_struct *work) +{ + int irq; + + for (irq = 0; irq < NR_IRQS; irq++) { + struct irq_desc *desc = irq_desc + irq; + if (desc->status & IRQ_MOVE_PENDING) { + unsigned long flags; + + spin_lock_irqsave(&desc->lock, flags); + if (!desc->chip->set_affinity || + !(desc->status & IRQ_MOVE_PENDING)) { + desc->status &= ~IRQ_MOVE_PENDING; + spin_unlock_irqrestore(&desc->lock, flags); + continue; + } + + desc->chip->set_affinity(irq, + irq_desc[irq].pending_mask); + spin_unlock_irqrestore(&desc->lock, flags); + } + } +} + +/* + * Migrates the IRQ destination in the process context. + */ +static void set_ir_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) +{ + if (irq_desc[irq].status & IRQ_LEVEL) { + irq_desc[irq].status |= IRQ_MOVE_PENDING; + irq_desc[irq].pending_mask = mask; + migrate_irq_remapped_level(irq); + return; + } + + migrate_ioapic_irq(irq, mask); +} +#endif + asmlinkage void smp_irq_move_cleanup_interrupt(void) { unsigned vector, me; @@ -1522,6 +1744,17 @@ static void irq_complete_move(unsigned int irq) #else static inline void irq_complete_move(unsigned int irq) {} #endif +#ifdef CONFIG_INTR_REMAP +static void ack_x2apic_level(unsigned int irq) +{ + ack_x2APIC_irq(); +} + +static void ack_x2apic_edge(unsigned int irq) +{ + ack_x2APIC_irq(); +} +#endif static void ack_apic_edge(unsigned int irq) { @@ -1596,6 +1829,21 @@ static struct irq_chip ioapic_chip __read_mostly = { .retrigger = ioapic_retrigger_irq, }; +#ifdef CONFIG_INTR_REMAP +static struct irq_chip ir_ioapic_chip __read_mostly = { + .name = "IR-IO-APIC", + .startup = startup_ioapic_irq, + .mask = mask_IO_APIC_irq, + .unmask = unmask_IO_APIC_irq, + .ack = ack_x2apic_edge, + .eoi = ack_x2apic_level, +#ifdef CONFIG_SMP + .set_affinity = set_ir_ioapic_affinity_irq, +#endif + .retrigger = ioapic_retrigger_irq, +}; +#endif + static inline void init_IO_APIC_traps(void) { int irq; @@ -1783,6 +2031,8 @@ static inline void __init check_timer(void) * 8259A. */ if (pin1 == -1) { + if (intr_remapping_enabled) + panic("BIOS bug: timer not connected to IO-APIC"); pin1 = pin2; apic1 = apic2; no_pin1 = 1; @@ -1809,6 +2059,8 @@ static inline void __init check_timer(void) clear_IO_APIC_pin(0, pin1); goto out; } + if (intr_remapping_enabled) + panic("timer doesn't work through Interrupt-remapped IO-APIC"); clear_IO_APIC_pin(apic1, pin1); if (!no_pin1) apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: " @@ -2401,6 +2653,10 @@ void __init setup_ioapic_dest(void) setup_IO_APIC_irq(ioapic, pin, irq, irq_trigger(irq_entry), irq_polarity(irq_entry)); +#ifdef CONFIG_INTR_REMAP + else if (intr_remapping_enabled) + set_ir_ioapic_affinity_irq(irq, TARGET_CPUS); +#endif else set_ioapic_affinity_irq(irq, TARGET_CPUS); } |