diff options
Diffstat (limited to 'arch/x86')
96 files changed, 2204 insertions, 2200 deletions
diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild new file mode 100644 index 00000000000..ad8ec356fb3 --- /dev/null +++ b/arch/x86/Kbuild @@ -0,0 +1,16 @@ + +obj-$(CONFIG_KVM) += kvm/ + +# Xen paravirtualization support +obj-$(CONFIG_XEN) += xen/ + +# lguest paravirtualization support +obj-$(CONFIG_LGUEST_GUEST) += lguest/ + +obj-y += kernel/ +obj-y += mm/ + +obj-y += crypto/ +obj-y += vdso/ +obj-$(CONFIG_IA32_EMULATION) += ia32/ + diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index a6efe0a2e9a..aafae3b140d 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -47,6 +47,11 @@ config X86 select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_LZMA +config OUTPUT_FORMAT + string + default "elf32-i386" if X86_32 + default "elf64-x86-64" if X86_64 + config ARCH_DEFCONFIG string default "arch/x86/configs/i386_defconfig" if X86_32 @@ -274,15 +279,9 @@ config SPARSE_IRQ If you don't know what to do here, say N. -config NUMA_MIGRATE_IRQ_DESC - bool "Move irq desc when changing irq smp_affinity" +config NUMA_IRQ_DESC + def_bool y depends on SPARSE_IRQ && NUMA - depends on BROKEN - default n - ---help--- - This enables moving irq_desc to cpu/node that irq will use handled. - - If you don't know what to do here, say N. config X86_MPPARSE bool "Enable MPS table" if ACPI @@ -355,7 +354,7 @@ config X86_UV depends on X86_64 depends on X86_EXTENDED_PLATFORM depends on NUMA - select X86_X2APIC + depends on X86_X2APIC ---help--- This option is needed in order to support SGI Ultraviolet systems. If you don't have one of these, you should say N here. @@ -1466,9 +1465,7 @@ config KEXEC_JUMP config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) - default "0x1000000" if X86_NUMAQ - default "0x200000" if X86_64 - default "0x100000" + default "0x1000000" ---help--- This gives the physical address where the kernel is loaded. @@ -1487,15 +1484,15 @@ config PHYSICAL_START to be specifically compiled to run from a specific memory area (normally a reserved region) and this option comes handy. - So if you are using bzImage for capturing the crash dump, leave - the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y. - Otherwise if you plan to use vmlinux for capturing the crash dump - change this value to start of the reserved region (Typically 16MB - 0x1000000). In other words, it can be set based on the "X" value as - specified in the "crashkernel=YM@XM" command line boot parameter - passed to the panic-ed kernel. Typically this parameter is set as - crashkernel=64M@16M. Please take a look at - Documentation/kdump/kdump.txt for more details about crash dumps. + So if you are using bzImage for capturing the crash dump, + leave the value here unchanged to 0x1000000 and set + CONFIG_RELOCATABLE=y. Otherwise if you plan to use vmlinux + for capturing the crash dump change this value to start of + the reserved region. In other words, it can be set based on + the "X" value as specified in the "crashkernel=YM@XM" + command line boot parameter passed to the panic-ed + kernel. Please take a look at Documentation/kdump/kdump.txt + for more details about crash dumps. Usage of bzImage for capturing the crash dump is recommended as one does not have to build two kernels. Same kernel can be used @@ -1508,8 +1505,8 @@ config PHYSICAL_START Don't change this unless you know what you are doing. config RELOCATABLE - bool "Build a relocatable kernel (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Build a relocatable kernel" + default y ---help--- This builds a kernel image that retains relocation information so it can be loaded someplace besides the default 1MB. @@ -1524,12 +1521,16 @@ config RELOCATABLE it has been loaded at and the compile time physical address (CONFIG_PHYSICAL_START) is ignored. +# Relocation on x86-32 needs some additional build support +config X86_NEED_RELOCS + def_bool y + depends on X86_32 && RELOCATABLE + config PHYSICAL_ALIGN hex prompt "Alignment value to which kernel should be aligned" if X86_32 - default "0x100000" if X86_32 - default "0x200000" if X86_64 - range 0x2000 0x400000 + default "0x1000000" + range 0x2000 0x1000000 ---help--- This value puts the alignment restrictions on physical address where kernel is loaded and run from. Kernel is compiled for an diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 8c86b72afdc..edbd0ca6206 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -7,8 +7,6 @@ else KBUILD_DEFCONFIG := $(ARCH)_defconfig endif -core-$(CONFIG_KVM) += arch/x86/kvm/ - # BITS is used as extension for files which are available in a 32 bit # and a 64 bit version to simplify shared Makefiles. # e.g.: obj-y += foo_$(BITS).o @@ -118,21 +116,8 @@ head-y += arch/x86/kernel/init_task.o libs-y += arch/x86/lib/ -# Sub architecture files that needs linking first -core-y += $(fcore-y) - -# Xen paravirtualization support -core-$(CONFIG_XEN) += arch/x86/xen/ - -# lguest paravirtualization support -core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/ - -core-y += arch/x86/kernel/ -core-y += arch/x86/mm/ - -core-y += arch/x86/crypto/ -core-y += arch/x86/vdso/ -core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/ +# See arch/x86/Kbuild for content of core part of the kernel +core-y += arch/x86/ # drivers-y are linked after core-y drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/ diff --git a/arch/x86/boot/.gitignore b/arch/x86/boot/.gitignore index 172cf8a98bd..851fe936d24 100644 --- a/arch/x86/boot/.gitignore +++ b/arch/x86/boot/.gitignore @@ -3,6 +3,8 @@ bzImage cpustr.h mkcpustr offsets.h +voffset.h +zoffset.h setup setup.bin setup.elf diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index 6633b6e7505..619d297aa2b 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -86,19 +86,27 @@ $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE SETUP_OBJS = $(addprefix $(obj)/,$(setup-y)) -sed-offsets := -e 's/^00*/0/' \ - -e 's/^\([0-9a-fA-F]*\) . \(input_data\|input_data_end\)$$/\#define \2 0x\1/p' +sed-voffset := -e 's/^\([0-9a-fA-F]*\) . \(_text\|_end\)$$/\#define VO_\2 0x\1/p' -quiet_cmd_offsets = OFFSETS $@ - cmd_offsets = $(NM) $< | sed -n $(sed-offsets) > $@ +quiet_cmd_voffset = VOFFSET $@ + cmd_voffset = $(NM) $< | sed -n $(sed-voffset) > $@ -$(obj)/offsets.h: $(obj)/compressed/vmlinux FORCE - $(call if_changed,offsets) +targets += voffset.h +$(obj)/voffset.h: vmlinux FORCE + $(call if_changed,voffset) + +sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p' + +quiet_cmd_zoffset = ZOFFSET $@ + cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@ + +targets += zoffset.h +$(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE + $(call if_changed,zoffset) -targets += offsets.h AFLAGS_header.o += -I$(obj) -$(obj)/header.o: $(obj)/offsets.h +$(obj)/header.o: $(obj)/voffset.h $(obj)/zoffset.h LDFLAGS_setup.elf := -T $(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE diff --git a/arch/x86/boot/compressed/.gitignore b/arch/x86/boot/compressed/.gitignore index 63eff3b04d0..4a46fab7162 100644 --- a/arch/x86/boot/compressed/.gitignore +++ b/arch/x86/boot/compressed/.gitignore @@ -1,3 +1,6 @@ relocs vmlinux.bin.all vmlinux.relocs +vmlinux.lds +mkpiggy +piggy.S diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index 65551c9f857..49c8a4c37d7 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -19,7 +19,9 @@ KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ LDFLAGS := -m elf_$(UTS_MACHINE) LDFLAGS_vmlinux := -T -$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE +hostprogs-y := mkpiggy + +$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE $(call if_changed,ld) @: @@ -29,7 +31,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE targets += vmlinux.bin.all vmlinux.relocs relocs -hostprogs-$(CONFIG_X86_32) += relocs +hostprogs-$(CONFIG_X86_NEED_RELOCS) += relocs quiet_cmd_relocs = RELOCS $@ cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $< @@ -37,46 +39,22 @@ $(obj)/vmlinux.relocs: vmlinux $(obj)/relocs FORCE $(call if_changed,relocs) vmlinux.bin.all-y := $(obj)/vmlinux.bin -vmlinux.bin.all-$(CONFIG_RELOCATABLE) += $(obj)/vmlinux.relocs -quiet_cmd_relocbin = BUILD $@ - cmd_relocbin = cat $(filter-out FORCE,$^) > $@ -$(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE - $(call if_changed,relocbin) - -ifeq ($(CONFIG_X86_32),y) +vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += $(obj)/vmlinux.relocs -ifdef CONFIG_RELOCATABLE -$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE - $(call if_changed,gzip) -$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin.all FORCE - $(call if_changed,bzip2) -$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE - $(call if_changed,lzma) -else -$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE +$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE $(call if_changed,gzip) -$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE +$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE $(call if_changed,bzip2) -$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE +$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE $(call if_changed,lzma) -endif -LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T -else +suffix-$(CONFIG_KERNEL_GZIP) := gz +suffix-$(CONFIG_KERNEL_BZIP2) := bz2 +suffix-$(CONFIG_KERNEL_LZMA) := lzma -$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE - $(call if_changed,gzip) -$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE - $(call if_changed,bzip2) -$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE - $(call if_changed,lzma) - -LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T -endif +quiet_cmd_mkpiggy = MKPIGGY $@ + cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false ) -suffix_$(CONFIG_KERNEL_GZIP) = gz -suffix_$(CONFIG_KERNEL_BZIP2) = bz2 -suffix_$(CONFIG_KERNEL_LZMA) = lzma - -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE - $(call if_changed,ld) +targets += piggy.S +$(obj)/piggy.S: $(obj)/vmlinux.bin.$(suffix-y) $(obj)/mkpiggy FORCE + $(call if_changed,mkpiggy) diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S index 3a8a866fb2e..75e4f001e70 100644 --- a/arch/x86/boot/compressed/head_32.S +++ b/arch/x86/boot/compressed/head_32.S @@ -12,16 +12,16 @@ * the page directory. [According to comments etc elsewhere on a compressed * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC] * - * Page 0 is deliberately kept safe, since System Management Mode code in + * Page 0 is deliberately kept safe, since System Management Mode code in * laptops may need to access the BIOS data stored there. This is also - * useful for future device drivers that either access the BIOS via VM86 + * useful for future device drivers that either access the BIOS via VM86 * mode. */ /* * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 */ -.text + .text #include <linux/linkage.h> #include <asm/segment.h> @@ -29,161 +29,151 @@ #include <asm/boot.h> #include <asm/asm-offsets.h> -.section ".text.head","ax",@progbits + .section ".text.head","ax",@progbits ENTRY(startup_32) cld - /* test KEEP_SEGMENTS flag to see if the bootloader is asking - * us to not reload segments */ - testb $(1<<6), BP_loadflags(%esi) - jnz 1f + /* + * Test KEEP_SEGMENTS flag to see if the bootloader is asking + * us to not reload segments + */ + testb $(1<<6), BP_loadflags(%esi) + jnz 1f cli - movl $(__BOOT_DS),%eax - movl %eax,%ds - movl %eax,%es - movl %eax,%fs - movl %eax,%gs - movl %eax,%ss + movl $__BOOT_DS, %eax + movl %eax, %ds + movl %eax, %es + movl %eax, %fs + movl %eax, %gs + movl %eax, %ss 1: -/* Calculate the delta between where we were compiled to run +/* + * Calculate the delta between where we were compiled to run * at and where we were actually loaded at. This can only be done * with a short local call on x86. Nothing else will tell us what * address we are running at. The reserved chunk of the real-mode * data at 0x1e4 (defined as a scratch field) are used as the stack * for this calculation. Only 4 bytes are needed. */ - leal (0x1e4+4)(%esi), %esp - call 1f -1: popl %ebp - subl $1b, %ebp + leal (BP_scratch+4)(%esi), %esp + call 1f +1: popl %ebp + subl $1b, %ebp -/* %ebp contains the address we are loaded at by the boot loader and %ebx +/* + * %ebp contains the address we are loaded at by the boot loader and %ebx * contains the address where we should move the kernel image temporarily * for safe in-place decompression. */ #ifdef CONFIG_RELOCATABLE - movl %ebp, %ebx - addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebx - andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx + movl %ebp, %ebx + movl BP_kernel_alignment(%esi), %eax + decl %eax + addl %eax, %ebx + notl %eax + andl %eax, %ebx #else - movl $LOAD_PHYSICAL_ADDR, %ebx + movl $LOAD_PHYSICAL_ADDR, %ebx #endif - /* Replace the compressed data size with the uncompressed size */ - subl input_len(%ebp), %ebx - movl output_len(%ebp), %eax - addl %eax, %ebx - /* Add 8 bytes for every 32K input block */ - shrl $12, %eax - addl %eax, %ebx - /* Add 32K + 18 bytes of extra slack */ - addl $(32768 + 18), %ebx - /* Align on a 4K boundary */ - addl $4095, %ebx - andl $~4095, %ebx - -/* Copy the compressed kernel to the end of our buffer + /* Target address to relocate to for decompression */ + addl $z_extract_offset, %ebx + + /* Set up the stack */ + leal boot_stack_end(%ebx), %esp + + /* Zero EFLAGS */ + pushl $0 + popfl + +/* + * Copy the compressed kernel to the end of our buffer * where decompression in place becomes safe. */ - pushl %esi - leal _end(%ebp), %esi - leal _end(%ebx), %edi - movl $(_end - startup_32), %ecx + pushl %esi + leal (_bss-4)(%ebp), %esi + leal (_bss-4)(%ebx), %edi + movl $(_bss - startup_32), %ecx + shrl $2, %ecx std - rep - movsb + rep movsl cld - popl %esi - -/* Compute the kernel start address. - */ -#ifdef CONFIG_RELOCATABLE - addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebp - andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebp -#else - movl $LOAD_PHYSICAL_ADDR, %ebp -#endif + popl %esi /* * Jump to the relocated address. */ - leal relocated(%ebx), %eax - jmp *%eax + leal relocated(%ebx), %eax + jmp *%eax ENDPROC(startup_32) -.section ".text" + .text relocated: /* - * Clear BSS - */ - xorl %eax,%eax - leal _edata(%ebx),%edi - leal _end(%ebx), %ecx - subl %edi,%ecx - cld - rep - stosb - -/* - * Setup the stack for the decompressor + * Clear BSS (stack is currently empty) */ - leal boot_stack_end(%ebx), %esp + xorl %eax, %eax + leal _bss(%ebx), %edi + leal _ebss(%ebx), %ecx + subl %edi, %ecx + shrl $2, %ecx + rep stosl /* * Do the decompression, and jump to the new kernel.. */ - movl output_len(%ebx), %eax - pushl %eax - # push arguments for decompress_kernel: - pushl %ebp # output address - movl input_len(%ebx), %eax - pushl %eax # input_len - leal input_data(%ebx), %eax - pushl %eax # input_data - leal boot_heap(%ebx), %eax - pushl %eax # heap area - pushl %esi # real mode pointer - call decompress_kernel - addl $20, %esp - popl %ecx + leal z_extract_offset_negative(%ebx), %ebp + /* push arguments for decompress_kernel: */ + pushl %ebp /* output address */ + pushl $z_input_len /* input_len */ + leal input_data(%ebx), %eax + pushl %eax /* input_data */ + leal boot_heap(%ebx), %eax + pushl %eax /* heap area */ + pushl %esi /* real mode pointer */ + call decompress_kernel + addl $20, %esp #if CONFIG_RELOCATABLE -/* Find the address of the relocations. +/* + * Find the address of the relocations. */ - movl %ebp, %edi - addl %ecx, %edi + leal z_output_len(%ebp), %edi -/* Calculate the delta between where vmlinux was compiled to run +/* + * Calculate the delta between where vmlinux was compiled to run * and where it was actually loaded. */ - movl %ebp, %ebx - subl $LOAD_PHYSICAL_ADDR, %ebx - jz 2f /* Nothing to be done if loaded at compiled addr. */ + movl %ebp, %ebx + subl $LOAD_PHYSICAL_ADDR, %ebx + jz 2f /* Nothing to be done if loaded at compiled addr. */ /* * Process relocations. */ -1: subl $4, %edi - movl 0(%edi), %ecx - testl %ecx, %ecx - jz 2f - addl %ebx, -__PAGE_OFFSET(%ebx, %ecx) - jmp 1b +1: subl $4, %edi + movl (%edi), %ecx + testl %ecx, %ecx + jz 2f + addl %ebx, -__PAGE_OFFSET(%ebx, %ecx) + jmp 1b 2: #endif /* * Jump to the decompressed kernel. */ - xorl %ebx,%ebx - jmp *%ebp + xorl %ebx, %ebx + jmp *%ebp -.bss -/* Stack and heap for uncompression */ -.balign 4 +/* + * Stack and heap for uncompression + */ + .bss + .balign 4 boot_heap: .fill BOOT_HEAP_SIZE, 1, 0 boot_stack: diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index ed4a8294800..f62c284db9e 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -21,8 +21,8 @@ /* * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 */ -.code32 -.text + .code32 + .text #include <linux/linkage.h> #include <asm/segment.h> @@ -33,12 +33,14 @@ #include <asm/processor-flags.h> #include <asm/asm-offsets.h> -.section ".text.head" + .section ".text.head" .code32 ENTRY(startup_32) cld - /* test KEEP_SEGMENTS flag to see if the bootloader is asking - * us to not reload segments */ + /* + * Test KEEP_SEGMENTS flag to see if the bootloader is asking + * us to not reload segments + */ testb $(1<<6), BP_loadflags(%esi) jnz 1f @@ -49,14 +51,15 @@ ENTRY(startup_32) movl %eax, %ss 1: -/* Calculate the delta between where we were compiled to run +/* + * Calculate the delta between where we were compiled to run * at and where we were actually loaded at. This can only be done * with a short local call on x86. Nothing else will tell us what * address we are running at. The reserved chunk of the real-mode * data at 0x1e4 (defined as a scratch field) are used as the stack * for this calculation. Only 4 bytes are needed. */ - leal (0x1e4+4)(%esi), %esp + leal (BP_scratch+4)(%esi), %esp call 1f 1: popl %ebp subl $1b, %ebp @@ -70,32 +73,28 @@ ENTRY(startup_32) testl %eax, %eax jnz no_longmode -/* Compute the delta between where we were compiled to run at +/* + * Compute the delta between where we were compiled to run at * and where the code will actually run at. - */ -/* %ebp contains the address we are loaded at by the boot loader and %ebx + * + * %ebp contains the address we are loaded at by the boot loader and %ebx * contains the address where we should move the kernel image temporarily * for safe in-place decompression. */ #ifdef CONFIG_RELOCATABLE movl %ebp, %ebx - addl $(PMD_PAGE_SIZE -1), %ebx - andl $PMD_PAGE_MASK, %ebx + movl BP_kernel_alignment(%esi), %eax + decl %eax + addl %eax, %ebx + notl %eax + andl %eax, %ebx #else - movl $CONFIG_PHYSICAL_START, %ebx + movl $LOAD_PHYSICAL_ADDR, %ebx #endif - /* Replace the compressed data size with the uncompressed size */ - subl input_len(%ebp), %ebx - movl output_len(%ebp), %eax - addl %eax, %ebx - /* Add 8 bytes for every 32K input block */ - shrl $12, %eax - addl %eax, %ebx - /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */ - addl $(32768 + 18 + 4095), %ebx - andl $~4095, %ebx + /* Target address to relocate to for decompression */ + addl $z_extract_offset, %ebx /* * Prepare for entering 64 bit mode @@ -114,7 +113,7 @@ ENTRY(startup_32) /* * Build early 4G boot pagetable */ - /* Initialize Page tables to 0*/ + /* Initialize Page tables to 0 */ leal pgtable(%ebx), %edi xorl %eax, %eax movl $((4096*6)/4), %ecx @@ -155,7 +154,8 @@ ENTRY(startup_32) btsl $_EFER_LME, %eax wrmsr - /* Setup for the jump to 64bit mode + /* + * Setup for the jump to 64bit mode * * When the jump is performend we will be in long mode but * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1 @@ -184,7 +184,8 @@ no_longmode: #include "../../kernel/verify_cpu_64.S" - /* Be careful here startup_64 needs to be at a predictable + /* + * Be careful here startup_64 needs to be at a predictable * address so I can export it in an ELF header. Bootloaders * should look at the ELF header to find this address, as * it may change in the future. @@ -192,7 +193,8 @@ no_longmode: .code64 .org 0x200 ENTRY(startup_64) - /* We come here either from startup_32 or directly from a + /* + * We come here either from startup_32 or directly from a * 64bit bootloader. If we come here from a bootloader we depend on * an identity mapped page table being provied that maps our * entire text+data+bss and hopefully all of memory. @@ -209,50 +211,54 @@ ENTRY(startup_64) movl $0x20, %eax ltr %ax - /* Compute the decompressed kernel start address. It is where + /* + * Compute the decompressed kernel start address. It is where * we were loaded at aligned to a 2M boundary. %rbp contains the * decompressed kernel start address. * * If it is a relocatable kernel then decompress and run the kernel * from load address aligned to 2MB addr, otherwise decompress and - * run the kernel from CONFIG_PHYSICAL_START + * run the kernel from LOAD_PHYSICAL_ADDR + * + * We cannot rely on the calculation done in 32-bit mode, since we + * may have been invoked via the 64-bit entry point. */ /* Start with the delta to where the kernel will run at. */ #ifdef CONFIG_RELOCATABLE leaq startup_32(%rip) /* - $startup_32 */, %rbp - addq $(PMD_PAGE_SIZE - 1), %rbp - andq $PMD_PAGE_MASK, %rbp - movq %rbp, %rbx + movl BP_kernel_alignment(%rsi), %eax + decl %eax + addq %rax, %rbp + notq %rax + andq %rax, %rbp #else - movq $CONFIG_PHYSICAL_START, %rbp - movq %rbp, %rbx + movq $LOAD_PHYSICAL_ADDR, %rbp #endif - /* Replace the compressed data size with the uncompressed size */ - movl input_len(%rip), %eax - subq %rax, %rbx - movl output_len(%rip), %eax - addq %rax, %rbx - /* Add 8 bytes for every 32K input block */ - shrq $12, %rax - addq %rax, %rbx - /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */ - addq $(32768 + 18 + 4095), %rbx - andq $~4095, %rbx - -/* Copy the compressed kernel to the end of our buffer + /* Target address to relocate to for decompression */ + leaq z_extract_offset(%rbp), %rbx + + /* Set up the stack */ + leaq boot_stack_end(%rbx), %rsp + + /* Zero EFLAGS */ + pushq $0 + popfq + +/* + * Copy the compressed kernel to the end of our buffer * where decompression in place becomes safe. */ - leaq _end_before_pgt(%rip), %r8 - leaq _end_before_pgt(%rbx), %r9 - movq $_end_before_pgt /* - $startup_32 */, %rcx -1: subq $8, %r8 - subq $8, %r9 - movq 0(%r8), %rax - movq %rax, 0(%r9) - subq $8, %rcx - jnz 1b + pushq %rsi + leaq (_bss-8)(%rip), %rsi + leaq (_bss-8)(%rbx), %rdi + movq $_bss /* - $startup_32 */, %rcx + shrq $3, %rcx + std + rep movsq + cld + popq %rsi /* * Jump to the relocated address. @@ -260,37 +266,28 @@ ENTRY(startup_64) leaq relocated(%rbx), %rax jmp *%rax -.section ".text" + .text relocated: /* - * Clear BSS + * Clear BSS (stack is currently empty) */ - xorq %rax, %rax - leaq _edata(%rbx), %rdi - leaq _end_before_pgt(%rbx), %rcx + xorl %eax, %eax + leaq _bss(%rip), %rdi + leaq _ebss(%rip), %rcx subq %rdi, %rcx - cld - rep - stosb - - /* Setup the stack */ - leaq boot_stack_end(%rip), %rsp - - /* zero EFLAGS after setting rsp */ - pushq $0 - popfq + shrq $3, %rcx + rep stosq /* * Do the decompression, and jump to the new kernel.. */ - pushq %rsi # Save the real mode argument - movq %rsi, %rdi # real mode address - leaq boot_heap(%rip), %rsi # malloc area for uncompression - leaq input_data(%rip), %rdx # input_data - movl input_len(%rip), %eax - movq %rax, %rcx # input_len - movq %rbp, %r8 # output + pushq %rsi /* Save the real mode argument */ + movq %rsi, %rdi /* real mode address */ + leaq boot_heap(%rip), %rsi /* malloc area for uncompression */ + leaq input_data(%rip), %rdx /* input_data */ + movl $z_input_len, %ecx /* input_len */ + movq %rbp, %r8 /* output target address */ call decompress_kernel popq %rsi @@ -311,11 +308,21 @@ gdt: .quad 0x0000000000000000 /* TS continued */ gdt_end: -.bss -/* Stack and heap for uncompression */ -.balign 4 +/* + * Stack and heap for uncompression + */ + .bss + .balign 4 boot_heap: .fill BOOT_HEAP_SIZE, 1, 0 boot_stack: .fill BOOT_STACK_SIZE, 1, 0 boot_stack_end: + +/* + * Space for page tables (not in .bss so not zeroed) + */ + .section ".pgtable","a",@nobits + .balign 4096 +pgtable: + .fill 6*4096, 1, 0 diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index e45be73684f..842b2a36174 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -325,21 +325,19 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, free_mem_ptr = heap; /* Heap */ free_mem_end_ptr = heap + BOOT_HEAP_SIZE; + if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1)) + error("Destination address inappropriately aligned"); #ifdef CONFIG_X86_64 - if ((unsigned long)output & (__KERNEL_ALIGN - 1)) - error("Destination address not 2M aligned"); - if ((unsigned long)output >= 0xffffffffffUL) + if (heap > 0x3fffffffffffUL) error("Destination address too large"); #else - if ((u32)output & (CONFIG_PHYSICAL_ALIGN - 1)) - error("Destination address not CONFIG_PHYSICAL_ALIGN aligned"); if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff)) error("Destination address too large"); +#endif #ifndef CONFIG_RELOCATABLE - if ((u32)output != LOAD_PHYSICAL_ADDR) + if ((unsigned long)output != LOAD_PHYSICAL_ADDR) error("Wrong destination address"); #endif -#endif if (!quiet) putstr("\nDecompressing Linux... "); diff --git a/arch/x86/boot/compressed/mkpiggy.c b/arch/x86/boot/compressed/mkpiggy.c new file mode 100644 index 00000000000..bcbd36c4143 --- /dev/null +++ b/arch/x86/boot/compressed/mkpiggy.c @@ -0,0 +1,97 @@ +/* ----------------------------------------------------------------------- * + * + * Copyright (C) 2009 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * H. Peter Anvin <hpa@linux.intel.com> + * + * ----------------------------------------------------------------------- */ + +/* + * Compute the desired load offset from a compressed program; outputs + * a small assembly wrapper with the appropriate symbols defined. + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <inttypes.h> + +static uint32_t getle32(const void *p) +{ + const uint8_t *cp = p; + + return (uint32_t)cp[0] + ((uint32_t)cp[1] << 8) + + ((uint32_t)cp[2] << 16) + ((uint32_t)cp[3] << 24); +} + +int main(int argc, char *argv[]) +{ + uint32_t olen; + long ilen; + unsigned long offs; + FILE *f; + + if (argc < 2) { + fprintf(stderr, "Usage: %s compressed_file\n", argv[0]); + return 1; + } + + /* Get the information for the compressed kernel image first */ + + f = fopen(argv[1], "r"); + if (!f) { + perror(argv[1]); + return 1; + } + + + if (fseek(f, -4L, SEEK_END)) { + perror(argv[1]); + } + fread(&olen, sizeof olen, 1, f); + ilen = ftell(f); + olen = getle32(&olen); + fclose(f); + + /* + * Now we have the input (compressed) and output (uncompressed) + * sizes, compute the necessary decompression offset... + */ + + offs = (olen > ilen) ? olen - ilen : 0; + offs += olen >> 12; /* Add 8 bytes for each 32K block */ + offs += 32*1024 + 18; /* Add 32K + 18 bytes slack */ + offs = (offs+4095) & ~4095; /* Round to a 4K boundary */ + + printf(".section \".rodata.compressed\",\"a\",@progbits\n"); + printf(".globl z_input_len\n"); + printf("z_input_len = %lu\n", ilen); + printf(".globl z_output_len\n"); + printf("z_output_len = %lu\n", (unsigned long)olen); + printf(".globl z_extract_offset\n"); + printf("z_extract_offset = 0x%lx\n", offs); + /* z_extract_offset_negative allows simplification of head_32.S */ + printf(".globl z_extract_offset_negative\n"); + printf("z_extract_offset_negative = -0x%lx\n", offs); + + printf(".globl input_data, input_data_end\n"); + printf("input_data:\n"); + printf(".incbin \"%s\"\n", argv[1]); + printf("input_data_end:\n"); + + return 0; +} diff --git a/arch/x86/boot/compressed/vmlinux_64.lds b/arch/x86/boot/compressed/vmlinux.lds.S index bef1ac891bc..cc353e1b3ff 100644 --- a/arch/x86/boot/compressed/vmlinux_64.lds +++ b/arch/x86/boot/compressed/vmlinux.lds.S @@ -1,6 +1,17 @@ -OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64") +OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT) + +#undef i386 + +#include <asm/page_types.h> + +#ifdef CONFIG_X86_64 OUTPUT_ARCH(i386:x86-64) ENTRY(startup_64) +#else +OUTPUT_ARCH(i386) +ENTRY(startup_32) +#endif + SECTIONS { /* Be careful parts of head_64.S assume startup_32 is at @@ -33,16 +44,22 @@ SECTIONS *(.data.*) _edata = . ; } + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); .bss : { _bss = . ; *(.bss) *(.bss.*) *(COMMON) - . = ALIGN(8); - _end_before_pgt = . ; - . = ALIGN(4096); - pgtable = . ; - . = . + 4096 * 6; + . = ALIGN(8); /* For convenience during zeroing */ _ebss = .; } +#ifdef CONFIG_X86_64 + . = ALIGN(PAGE_SIZE); + .pgtable : { + _pgtable = . ; + *(.pgtable) + _epgtable = . ; + } +#endif + _end = .; } diff --git a/arch/x86/boot/compressed/vmlinux.scr b/arch/x86/boot/compressed/vmlinux.scr deleted file mode 100644 index f02382ae5c4..00000000000 --- a/arch/x86/boot/compressed/vmlinux.scr +++ /dev/null @@ -1,10 +0,0 @@ -SECTIONS -{ - .rodata.compressed : { - input_len = .; - LONG(input_data_end - input_data) input_data = .; - *(.data) - output_len = . - 4; - input_data_end = .; - } -} diff --git a/arch/x86/boot/compressed/vmlinux_32.lds b/arch/x86/boot/compressed/vmlinux_32.lds deleted file mode 100644 index bb3c48379c4..00000000000 --- a/arch/x86/boot/compressed/vmlinux_32.lds +++ /dev/null @@ -1,43 +0,0 @@ -OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") -OUTPUT_ARCH(i386) -ENTRY(startup_32) -SECTIONS -{ - /* Be careful parts of head_32.S assume startup_32 is at - * address 0. - */ - . = 0; - .text.head : { - _head = . ; - *(.text.head) - _ehead = . ; - } - .rodata.compressed : { - *(.rodata.compressed) - } - .text : { - _text = .; /* Text */ - *(.text) - *(.text.*) - _etext = . ; - } - .rodata : { - _rodata = . ; - *(.rodata) /* read-only data */ - *(.rodata.*) - _erodata = . ; - } - .data : { - _data = . ; - *(.data) - *(.data.*) - _edata = . ; - } - .bss : { - _bss = . ; - *(.bss) - *(.bss.*) - *(COMMON) - _end = . ; - } -} diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S index 5d84d1c74e4..1040f6e8010 100644 --- a/arch/x86/boot/header.S +++ b/arch/x86/boot/header.S @@ -22,7 +22,8 @@ #include <asm/page_types.h> #include <asm/setup.h> #include "boot.h" -#include "offsets.h" +#include "voffset.h" +#include "zoffset.h" BOOTSEG = 0x07C0 /* original address of boot-sector */ SYSSEG = 0x1000 /* historical load address >> 4 */ @@ -115,7 +116,7 @@ _start: # Part 2 of the header, from the old setup.S .ascii "HdrS" # header signature - .word 0x0209 # header version number (>= 0x0105) + .word 0x020a # header version number (>= 0x0105) # or else old loadlin-1.5 will fail) .globl realmode_swtch realmode_swtch: .word 0, 0 # default_switch, SETUPSEG @@ -168,7 +169,11 @@ heap_end_ptr: .word _end+STACK_SIZE-512 # end of setup code can be used by setup # for local heap purposes. -pad1: .word 0 +ext_loader_ver: + .byte 0 # Extended boot loader version +ext_loader_type: + .byte 0 # Extended boot loader type + cmd_line_ptr: .long 0 # (Header version 0x0202 or later) # If nonzero, a 32-bit pointer # to the kernel command line. @@ -200,7 +205,7 @@ relocatable_kernel: .byte 1 #else relocatable_kernel: .byte 0 #endif -pad2: .byte 0 +min_alignment: .byte MIN_KERNEL_ALIGN_LG2 # minimum alignment pad3: .word 0 cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line, @@ -212,13 +217,24 @@ hardware_subarch: .long 0 # subarchitecture, added with 2.07 hardware_subarch_data: .quad 0 -payload_offset: .long input_data -payload_length: .long input_data_end-input_data +payload_offset: .long ZO_input_data +payload_length: .long ZO_z_input_len setup_data: .quad 0 # 64-bit physical pointer to # single linked list of # struct setup_data +pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr + +#define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_extract_offset) +#define VO_INIT_SIZE (VO__end - VO__text) +#if ZO_INIT_SIZE > VO_INIT_SIZE +#define INIT_SIZE ZO_INIT_SIZE +#else +#define INIT_SIZE VO_INIT_SIZE +#endif +init_size: .long INIT_SIZE # kernel initialization size + # End of setup header ##################################################### .section ".inittext", "ax" diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index 235b81d0f6f..edb992ebef9 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc4 -# Tue Feb 24 15:50:58 2009 +# Linux kernel version: 2.6.30-rc2 +# Mon May 11 16:21:55 2009 # # CONFIG_64BIT is not set CONFIG_X86_32=y # CONFIG_X86_64 is not set CONFIG_X86=y +CONFIG_OUTPUT_FORMAT="elf32-i386" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y @@ -33,6 +34,7 @@ CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y @@ -40,15 +42,16 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y # CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_X86_SMP=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=y CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y +CONFIG_X86_32_LAZY_GS=y CONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -60,10 +63,17 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_TASKSTATS=y @@ -113,23 +123,26 @@ CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -139,6 +152,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -154,6 +168,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -167,7 +183,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set -CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -194,12 +209,12 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_SPARSE_IRQ=y -CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y +# CONFIG_X86_BIGSMP is not set +CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_ELAN is not set -# CONFIG_X86_GENERICARCH is not set -# CONFIG_X86_VSMP is not set # CONFIG_X86_RDC321X is not set +# CONFIG_X86_32_NON_STANDARD is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set # CONFIG_MEMTEST is not set @@ -230,8 +245,10 @@ CONFIG_M686=y # CONFIG_GENERIC_CPU is not set CONFIG_X86_GENERIC=y CONFIG_X86_CPU=y +CONFIG_X86_L1_CACHE_BYTES=64 +CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_XADD=y # CONFIG_X86_PPRO_FENCE is not set CONFIG_X86_WP_WORKS_OK=y @@ -247,7 +264,7 @@ CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_CYRIX_32=y CONFIG_CPU_SUP_AMD=y -CONFIG_CPU_SUP_CENTAUR_32=y +CONFIG_CPU_SUP_CENTAUR=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=y CONFIG_X86_DS=y @@ -279,6 +296,7 @@ CONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y +# CONFIG_X86_CPU_DEBUG is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set @@ -302,6 +320,8 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_HIGHPTE=y CONFIG_X86_CHECK_BIOS_CORRUPTION=y CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y @@ -312,6 +332,7 @@ CONFIG_MTRR=y CONFIG_X86_PAT=y CONFIG_EFI=y CONFIG_SECCOMP=y +# CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set @@ -322,8 +343,9 @@ CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y # CONFIG_KEXEC_JUMP is not set CONFIG_PHYSICAL_START=0x1000000 -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_RELOCATABLE=y +CONFIG_X86_NEED_RELOCS=y +CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set @@ -363,7 +385,6 @@ CONFIG_ACPI_THERMAL=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_PCI_SLOT is not set -CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set @@ -425,6 +446,7 @@ CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y +# CONFIG_DMAR is not set CONFIG_PCIEPORTBUS=y # CONFIG_HOTPLUG_PCI_PCIE is not set CONFIG_PCIEAER=y @@ -435,6 +457,7 @@ CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set CONFIG_HT_IRQ=y +# CONFIG_PCI_IOV is not set CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set # CONFIG_MCA is not set @@ -481,7 +504,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -639,6 +661,7 @@ CONFIG_LLC=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -696,6 +719,7 @@ CONFIG_NET_SCH_FIFO=y # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set CONFIG_HAMRADIO=y # @@ -706,12 +730,10 @@ CONFIG_HAMRADIO=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y CONFIG_CFG80211=y # CONFIG_CFG80211_REG_DEBUG is not set -CONFIG_NL80211=y CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y @@ -789,6 +811,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -842,6 +865,7 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y @@ -940,6 +964,7 @@ CONFIG_DM_ZERO=y CONFIG_MACINTOSH_DRIVERS=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -977,6 +1002,8 @@ CONFIG_MII=y CONFIG_NET_VENDOR_3COM=y # CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set # CONFIG_TULIP is not set @@ -1026,6 +1053,7 @@ CONFIG_E1000=y CONFIG_E1000E=y # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -1040,6 +1068,7 @@ CONFIG_BNX2=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -1049,6 +1078,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -1058,6 +1088,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set CONFIG_TR=y # CONFIG_IBMOL is not set # CONFIG_IBMLS is not set @@ -1073,8 +1104,8 @@ CONFIG_WLAN_80211=y # CONFIG_LIBERTAS is not set # CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_AIRO is not set -# CONFIG_HERMES is not set # CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_WL3501 is not set # CONFIG_PRISM54 is not set @@ -1084,21 +1115,21 @@ CONFIG_WLAN_80211=y # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set # CONFIG_P54_COMMON is not set CONFIG_ATH5K=y # CONFIG_ATH5K_DEBUG is not set # CONFIG_ATH9K is not set +# CONFIG_AR9170_USB is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set -# CONFIG_IWLCORE is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWLAGN is not set -# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set +# CONFIG_HERMES is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1209,6 +1240,8 @@ CONFIG_INPUT_TABLET=y # CONFIG_TABLET_USB_KBTAB is not set # CONFIG_TABLET_USB_WACOM is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -1303,6 +1336,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_INTEL=y CONFIG_HW_RANDOM_AMD=y CONFIG_HW_RANDOM_GEODE=y @@ -1390,7 +1424,6 @@ CONFIG_I2C_I801=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1424,6 +1457,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_K8TEMP is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATK0110 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1433,6 +1467,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_FSCHMD is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_CORETEMP is not set @@ -1448,11 +1483,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1643,7 +1681,6 @@ CONFIG_FB_EFI=y # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set @@ -1652,6 +1689,7 @@ CONFIG_FB_EFI=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y @@ -1738,6 +1776,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1811,15 +1851,17 @@ CONFIG_USB_HIDDEV=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y CONFIG_LOGITECH_FF=y # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1885,11 +1927,11 @@ CONFIG_USB_PRINTER=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1931,7 +1973,6 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1947,6 +1988,7 @@ CONFIG_USB_LIBUSUAL=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1958,8 +2000,10 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_ALIX2 is not set # CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_CLEVO_MAIL is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1969,6 +2013,10 @@ CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC=y @@ -2037,6 +2085,7 @@ CONFIG_DMADEVICES=y # DMA Devices # # CONFIG_INTEL_IOATDMA is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set CONFIG_X86_PLATFORM_DEVICES=y @@ -2071,6 +2120,7 @@ CONFIG_DMIID=y # # CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y @@ -2101,6 +2151,11 @@ CONFIG_AUTOFS4_FS=y CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -2151,6 +2206,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -2164,7 +2220,6 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -2251,6 +2306,7 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y @@ -2266,6 +2322,7 @@ CONFIG_TIMER_STATS=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_HIGHMEM is not set CONFIG_DEBUG_BUGVERBOSE=y @@ -2289,13 +2346,19 @@ CONFIG_FRAME_POINTER=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_USER_STACKTRACE_SUPPORT=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_HW_BRANCH_TRACER=y +CONFIG_HAVE_FTRACE_SYSCALLS=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -2305,13 +2368,21 @@ CONFIG_HAVE_HW_BRANCH_TRACER=y # CONFIG_SYSPROF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_FTRACE_SYSCALLS is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_POWER_TRACER is not set # CONFIG_STACK_TRACER is not set # CONFIG_HW_BRANCH_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_MMIOTRACE is not set CONFIG_PROVIDE_OHCI1394_DMA_INIT=y -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -2321,7 +2392,6 @@ CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK_DBGP=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_X86_PTDUMP is not set CONFIG_DEBUG_RODATA=y @@ -2329,7 +2399,7 @@ CONFIG_DEBUG_RODATA=y CONFIG_DEBUG_NX_TEST=m # CONFIG_4KSTACKS is not set CONFIG_DOUBLEFAULT=y -# CONFIG_MMIOTRACE is not set +CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 @@ -2365,6 +2435,8 @@ CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set # CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_IMA is not set CONFIG_CRYPTO=y # @@ -2380,10 +2452,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -2456,6 +2530,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -2467,11 +2542,13 @@ CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_GEODE is not set # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_HAVE_KVM=y +CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_VIRTUALIZATION=y # CONFIG_KVM is not set # CONFIG_LGUEST is not set # CONFIG_VIRTIO_PCI is not set # CONFIG_VIRTIO_BALLOON is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -2489,7 +2566,10 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 9fe5d212ab4..cee1dd2e69b 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -1,12 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc4 -# Tue Feb 24 15:44:16 2009 +# Linux kernel version: 2.6.30-rc2 +# Mon May 11 16:22:00 2009 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y +CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y @@ -34,6 +35,7 @@ CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y @@ -41,14 +43,14 @@ CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_X86_SMP=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -61,10 +63,17 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_TASKSTATS=y @@ -114,23 +123,26 @@ CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -140,6 +152,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -155,6 +168,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -167,7 +182,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -195,12 +209,10 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_SPARSE_IRQ=y -# CONFIG_NUMA_MIGRATE_IRQ_DESC is not set -CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y -# CONFIG_X86_ELAN is not set -# CONFIG_X86_GENERICARCH is not set +CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_VSMP is not set +# CONFIG_X86_UV is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set # CONFIG_MEMTEST is not set @@ -230,10 +242,10 @@ CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_MCORE2 is not set CONFIG_GENERIC_CPU=y CONFIG_X86_CPU=y -CONFIG_X86_L1_CACHE_BYTES=128 -CONFIG_X86_INTERNODE_CACHE_BYTES=128 +CONFIG_X86_L1_CACHE_BYTES=64 +CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y @@ -242,7 +254,7 @@ CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y -CONFIG_CPU_SUP_CENTAUR_64=y +CONFIG_CPU_SUP_CENTAUR=y CONFIG_X86_DS=y CONFIG_X86_PTRACE_BTS=y CONFIG_HPET_TIMER=y @@ -269,6 +281,7 @@ CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y +CONFIG_X86_MCE_THRESHOLD=y # CONFIG_I8K is not set CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y @@ -276,6 +289,7 @@ CONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y +# CONFIG_X86_CPU_DEBUG is not set CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y CONFIG_NUMA=y @@ -309,6 +323,8 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_X86_CHECK_BIOS_CORRUPTION=y CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y CONFIG_X86_RESERVE_LOW_64K=y @@ -317,6 +333,7 @@ CONFIG_MTRR=y CONFIG_X86_PAT=y CONFIG_EFI=y CONFIG_SECCOMP=y +# CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set @@ -325,9 +342,10 @@ CONFIG_HZ=1000 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y +# CONFIG_KEXEC_JUMP is not set CONFIG_PHYSICAL_START=0x1000000 -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_RELOCATABLE=y +CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set @@ -370,7 +388,6 @@ CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_PCI_SLOT is not set -CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set @@ -436,6 +453,7 @@ CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set CONFIG_HT_IRQ=y +# CONFIG_PCI_IOV is not set CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y CONFIG_PCCARD=y @@ -481,7 +499,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -639,6 +656,7 @@ CONFIG_LLC=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -696,6 +714,7 @@ CONFIG_NET_SCH_FIFO=y # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set CONFIG_HAMRADIO=y # @@ -706,12 +725,10 @@ CONFIG_HAMRADIO=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y CONFIG_CFG80211=y # CONFIG_CFG80211_REG_DEBUG is not set -CONFIG_NL80211=y CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y @@ -788,9 +805,8 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_SGI_XP is not set # CONFIG_HP_ILO is not set -# CONFIG_SGI_GRU is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -844,6 +860,7 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y @@ -940,6 +957,7 @@ CONFIG_DM_ZERO=y CONFIG_MACINTOSH_DRIVERS=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -977,6 +995,8 @@ CONFIG_MII=y CONFIG_NET_VENDOR_3COM=y # CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set # CONFIG_TULIP is not set @@ -1026,6 +1046,7 @@ CONFIG_E1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -1040,6 +1061,7 @@ CONFIG_TIGON3=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -1049,6 +1071,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -1058,6 +1081,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set CONFIG_TR=y # CONFIG_IBMOL is not set # CONFIG_3C359 is not set @@ -1072,8 +1096,8 @@ CONFIG_WLAN_80211=y # CONFIG_LIBERTAS is not set # CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_AIRO is not set -# CONFIG_HERMES is not set # CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_WL3501 is not set # CONFIG_PRISM54 is not set @@ -1083,21 +1107,21 @@ CONFIG_WLAN_80211=y # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set # CONFIG_P54_COMMON is not set CONFIG_ATH5K=y # CONFIG_ATH5K_DEBUG is not set # CONFIG_ATH9K is not set +# CONFIG_AR9170_USB is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set -# CONFIG_IWLCORE is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWLAGN is not set -# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set +# CONFIG_HERMES is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1208,6 +1232,8 @@ CONFIG_INPUT_TABLET=y # CONFIG_TABLET_USB_KBTAB is not set # CONFIG_TABLET_USB_WACOM is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -1301,6 +1327,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_HW_RANDOM_INTEL is not set # CONFIG_HW_RANDOM_AMD is not set CONFIG_NVRAM=y @@ -1382,7 +1409,6 @@ CONFIG_I2C_I801=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1416,6 +1442,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_K8TEMP is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATK0110 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1425,6 +1452,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_FSCHMD is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_CORETEMP is not set @@ -1440,11 +1468,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1635,6 +1666,7 @@ CONFIG_FB_EFI=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y @@ -1720,6 +1752,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1792,15 +1826,17 @@ CONFIG_USB_HIDDEV=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y CONFIG_LOGITECH_FF=y # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1866,11 +1902,11 @@ CONFIG_USB_PRINTER=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1912,7 +1948,6 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1928,6 +1963,7 @@ CONFIG_USB_LIBUSUAL=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1939,8 +1975,10 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_ALIX2 is not set # CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_CLEVO_MAIL is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1950,6 +1988,10 @@ CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC=y @@ -2018,6 +2060,7 @@ CONFIG_DMADEVICES=y # DMA Devices # # CONFIG_INTEL_IOATDMA is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set CONFIG_X86_PLATFORM_DEVICES=y @@ -2051,6 +2094,7 @@ CONFIG_DMIID=y # # CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y @@ -2082,6 +2126,11 @@ CONFIG_AUTOFS4_FS=y CONFIG_GENERIC_ACL=y # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y @@ -2132,6 +2181,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -2145,7 +2195,6 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -2232,6 +2281,7 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y @@ -2247,6 +2297,7 @@ CONFIG_TIMER_STATS=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set @@ -2269,13 +2320,19 @@ CONFIG_FRAME_POINTER=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_USER_STACKTRACE_SUPPORT=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_HW_BRANCH_TRACER=y +CONFIG_HAVE_FTRACE_SYSCALLS=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -2285,13 +2342,21 @@ CONFIG_HAVE_HW_BRANCH_TRACER=y # CONFIG_SYSPROF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_FTRACE_SYSCALLS is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_POWER_TRACER is not set # CONFIG_STACK_TRACER is not set # CONFIG_HW_BRANCH_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_MMIOTRACE is not set CONFIG_PROVIDE_OHCI1394_DMA_INIT=y -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -2301,14 +2366,13 @@ CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK_DBGP=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_X86_PTDUMP is not set CONFIG_DEBUG_RODATA=y # CONFIG_DEBUG_RODATA_TEST is not set CONFIG_DEBUG_NX_TEST=m # CONFIG_IOMMU_DEBUG is not set -# CONFIG_MMIOTRACE is not set +CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 @@ -2344,6 +2408,8 @@ CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set # CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_IMA is not set CONFIG_CRYPTO=y # @@ -2359,10 +2425,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -2414,6 +2482,7 @@ CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_X86_64 is not set +# CONFIG_CRYPTO_AES_NI_INTEL is not set # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_BLOWFISH is not set @@ -2435,6 +2504,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -2444,10 +2514,12 @@ CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_HAVE_KVM=y +CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_VIRTUALIZATION=y # CONFIG_KVM is not set # CONFIG_VIRTIO_PCI is not set # CONFIG_VIRTIO_BALLOON is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -2464,7 +2536,10 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h index f6aa18eadf7..1a37bcdc860 100644 --- a/arch/x86/include/asm/alternative.h +++ b/arch/x86/include/asm/alternative.h @@ -3,6 +3,7 @@ #include <linux/types.h> #include <linux/stddef.h> +#include <linux/stringify.h> #include <asm/asm.h> /* @@ -74,6 +75,22 @@ static inline void alternatives_smp_switch(int smp) {} const unsigned char *const *find_nop_table(void); +/* alternative assembly primitive: */ +#define ALTERNATIVE(oldinstr, newinstr, feature) \ + \ + "661:\n\t" oldinstr "\n662:\n" \ + ".section .altinstructions,\"a\"\n" \ + _ASM_ALIGN "\n" \ + _ASM_PTR "661b\n" /* label */ \ + _ASM_PTR "663f\n" /* new instruction */ \ + " .byte " __stringify(feature) "\n" /* feature bit */ \ + " .byte 662b-661b\n" /* sourcelen */ \ + " .byte 664f-663f\n" /* replacementlen */ \ + ".previous\n" \ + ".section .altinstr_replacement, \"ax\"\n" \ + "663:\n\t" newinstr "\n664:\n" /* replacement */ \ + ".previous" + /* * Alternative instructions for different CPU types or capabilities. * @@ -87,18 +104,7 @@ const unsigned char *const *find_nop_table(void); * without volatile and memory clobber. */ #define alternative(oldinstr, newinstr, feature) \ - asm volatile ("661:\n\t" oldinstr "\n662:\n" \ - ".section .altinstructions,\"a\"\n" \ - _ASM_ALIGN "\n" \ - _ASM_PTR "661b\n" /* label */ \ - _ASM_PTR "663f\n" /* new instruction */ \ - " .byte %c0\n" /* feature bit */ \ - " .byte 662b-661b\n" /* sourcelen */ \ - " .byte 664f-663f\n" /* replacementlen */ \ - ".previous\n" \ - ".section .altinstr_replacement,\"ax\"\n" \ - "663:\n\t" newinstr "\n664:\n" /* replacement */ \ - ".previous" :: "i" (feature) : "memory") + asm volatile (ALTERNATIVE(oldinstr, newinstr, feature) : : : "memory") /* * Alternative inline assembly with input. @@ -109,35 +115,16 @@ const unsigned char *const *find_nop_table(void); * Best is to use constraints that are fixed size (like (%1) ... "r") * If you use variable sized constraints like "m" or "g" in the * replacement make sure to pad to the worst case length. + * Leaving an unused argument 0 to keep API compatibility. */ #define alternative_input(oldinstr, newinstr, feature, input...) \ - asm volatile ("661:\n\t" oldinstr "\n662:\n" \ - ".section .altinstructions,\"a\"\n" \ - _ASM_ALIGN "\n" \ - _ASM_PTR "661b\n" /* label */ \ - _ASM_PTR "663f\n" /* new instruction */ \ - " .byte %c0\n" /* feature bit */ \ - " .byte 662b-661b\n" /* sourcelen */ \ - " .byte 664f-663f\n" /* replacementlen */ \ - ".previous\n" \ - ".section .altinstr_replacement,\"ax\"\n" \ - "663:\n\t" newinstr "\n664:\n" /* replacement */ \ - ".previous" :: "i" (feature), ##input) + asm volatile (ALTERNATIVE(oldinstr, newinstr, feature) \ + : : "i" (0), ## input) /* Like alternative_input, but with a single output argument */ #define alternative_io(oldinstr, newinstr, feature, output, input...) \ - asm volatile ("661:\n\t" oldinstr "\n662:\n" \ - ".section .altinstructions,\"a\"\n" \ - _ASM_ALIGN "\n" \ - _ASM_PTR "661b\n" /* label */ \ - _ASM_PTR "663f\n" /* new instruction */ \ - " .byte %c[feat]\n" /* feature bit */ \ - " .byte 662b-661b\n" /* sourcelen */ \ - " .byte 664f-663f\n" /* replacementlen */ \ - ".previous\n" \ - ".section .altinstr_replacement,\"ax\"\n" \ - "663:\n\t" newinstr "\n664:\n" /* replacement */ \ - ".previous" : output : [feat] "i" (feature), ##input) + asm volatile (ALTERNATIVE(oldinstr, newinstr, feature) \ + : output : "i" (0), ## input) /* * use this macro(s) if you need more than one output parameter diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 42f2f837742..229d0be184a 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -107,8 +107,7 @@ extern u32 native_safe_apic_wait_icr_idle(void); extern void native_apic_icr_write(u32 low, u32 id); extern u64 native_apic_icr_read(void); -#define EIM_8BIT_APIC_ID 0 -#define EIM_32BIT_APIC_ID 1 +extern int x2apic_mode; #ifdef CONFIG_X86_X2APIC /* @@ -166,10 +165,9 @@ static inline u64 native_x2apic_icr_read(void) return val; } -extern int x2apic, x2apic_phys; +extern int x2apic_phys; extern void check_x2apic(void); extern void enable_x2apic(void); -extern void enable_IR_x2apic(void); extern void x2apic_icr_write(u32 low, u32 id); static inline int x2apic_enabled(void) { @@ -183,6 +181,8 @@ static inline int x2apic_enabled(void) return 1; return 0; } + +#define x2apic_supported() (cpu_has_x2apic) #else static inline void check_x2apic(void) { @@ -190,28 +190,20 @@ static inline void check_x2apic(void) static inline void enable_x2apic(void) { } -static inline void enable_IR_x2apic(void) -{ -} static inline int x2apic_enabled(void) { return 0; } -#define x2apic 0 - +#define x2apic_preenabled 0 +#define x2apic_supported() 0 #endif -extern int get_physical_broadcast(void); +extern void enable_IR_x2apic(void); -#ifdef CONFIG_X86_X2APIC -static inline void ack_x2APIC_irq(void) -{ - /* Docs say use 0 for future compatibility */ - native_apic_msr_write(APIC_EOI, 0); -} -#endif +extern int get_physical_broadcast(void); +extern void apic_disable(void); extern int lapic_get_maxlvt(void); extern void clear_local_APIC(void); extern void connect_bsp_APIC(void); @@ -252,7 +244,7 @@ static inline void lapic_shutdown(void) { } #define local_apic_timer_c2_ok 1 static inline void init_apic_mappings(void) { } static inline void disable_local_APIC(void) { } - +static inline void apic_disable(void) { } #endif /* !CONFIG_X86_LOCAL_APIC */ #ifdef CONFIG_X86_64 @@ -478,6 +470,9 @@ static inline unsigned int read_apic_id(void) extern void default_setup_apic_routing(void); #ifdef CONFIG_X86_32 + +extern struct apic apic_default; + /* * Set up the logical destination ID. * diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h index bc9514fb3b1..7ddb36ab933 100644 --- a/arch/x86/include/asm/apicdef.h +++ b/arch/x86/include/asm/apicdef.h @@ -22,6 +22,7 @@ # define APIC_INTEGRATED(x) (1) #endif #define APIC_XAPIC(x) ((x) >= 0x14) +#define APIC_EXT_SPACE(x) ((x) & 0x80000000) #define APIC_TASKPRI 0x80 #define APIC_TPRI_MASK 0xFFu #define APIC_ARBPRI 0x90 @@ -116,7 +117,9 @@ #define APIC_TDR_DIV_32 0x8 #define APIC_TDR_DIV_64 0x9 #define APIC_TDR_DIV_128 0xA -#define APIC_EILVT0 0x500 +#define APIC_EFEAT 0x400 +#define APIC_ECTRL 0x410 +#define APIC_EILVTn(n) (0x500 + 0x10 * n) #define APIC_EILVT_NR_AMD_K8 1 /* # of extended interrupts */ #define APIC_EILVT_NR_AMD_10H 4 #define APIC_EILVT_LVTOFF(x) (((x) >> 4) & 0xF) @@ -125,9 +128,6 @@ #define APIC_EILVT_MSG_NMI 0x4 #define APIC_EILVT_MSG_EXT 0x7 #define APIC_EILVT_MASKED (1 << 16) -#define APIC_EILVT1 0x510 -#define APIC_EILVT2 0x520 -#define APIC_EILVT3 0x530 #define APIC_BASE (fix_to_virt(FIX_APIC_BASE)) #define APIC_BASE_MSR 0x800 diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h index 6ba23dd9fc9..418e632d4a8 100644 --- a/arch/x86/include/asm/boot.h +++ b/arch/x86/include/asm/boot.h @@ -8,11 +8,26 @@ #ifdef __KERNEL__ +#include <asm/page_types.h> + /* Physical address where kernel should be loaded. */ #define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \ + (CONFIG_PHYSICAL_ALIGN - 1)) \ & ~(CONFIG_PHYSICAL_ALIGN - 1)) +/* Minimum kernel alignment, as a power of two */ +#ifdef CONFIG_x86_64 +#define MIN_KERNEL_ALIGN_LG2 PMD_SHIFT +#else +#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT+1) +#endif +#define MIN_KERNEL_ALIGN (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2) + +#if (CONFIG_PHYSICAL_ALIGN & (CONFIG_PHYSICAL_ALIGN-1)) || \ + (CONFIG_PHYSICAL_ALIGN < (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)) +#error "Invalid value for CONFIG_PHYSICAL_ALIGN" +#endif + #ifdef CONFIG_KERNEL_BZIP2 #define BOOT_HEAP_SIZE 0x400000 #else /* !CONFIG_KERNEL_BZIP2 */ diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h index 433adaebf9b..1724e8de317 100644 --- a/arch/x86/include/asm/bootparam.h +++ b/arch/x86/include/asm/bootparam.h @@ -50,7 +50,8 @@ struct setup_header { __u32 ramdisk_size; __u32 bootsect_kludge; __u16 heap_end_ptr; - __u16 _pad1; + __u8 ext_loader_ver; + __u8 ext_loader_type; __u32 cmd_line_ptr; __u32 initrd_addr_max; __u32 kernel_alignment; diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index bb83b1c397a..13cc6a503a0 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -22,7 +22,7 @@ #define X86_FEATURE_TSC (0*32+ 4) /* Time Stamp Counter */ #define X86_FEATURE_MSR (0*32+ 5) /* Model-Specific Registers */ #define X86_FEATURE_PAE (0*32+ 6) /* Physical Address Extensions */ -#define X86_FEATURE_MCE (0*32+ 7) /* Machine Check Architecture */ +#define X86_FEATURE_MCE (0*32+ 7) /* Machine Check Exception */ #define X86_FEATURE_CX8 (0*32+ 8) /* CMPXCHG8 instruction */ #define X86_FEATURE_APIC (0*32+ 9) /* Onboard APIC */ #define X86_FEATURE_SEP (0*32+11) /* SYSENTER/SYSEXIT */ @@ -192,11 +192,11 @@ extern const char * const x86_power_flags[32]; #define clear_cpu_cap(c, bit) clear_bit(bit, (unsigned long *)((c)->x86_capability)) #define setup_clear_cpu_cap(bit) do { \ clear_cpu_cap(&boot_cpu_data, bit); \ - set_bit(bit, (unsigned long *)cleared_cpu_caps); \ + set_bit(bit, (unsigned long *)cpu_caps_cleared); \ } while (0) #define setup_force_cpu_cap(bit) do { \ set_cpu_cap(&boot_cpu_data, bit); \ - clear_bit(bit, (unsigned long *)cleared_cpu_caps); \ + set_bit(bit, (unsigned long *)cpu_caps_set); \ } while (0) #define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU) diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h index b762ea49bd7..3bd1777a4c8 100644 --- a/arch/x86/include/asm/hw_irq.h +++ b/arch/x86/include/asm/hw_irq.h @@ -63,7 +63,26 @@ extern unsigned long io_apic_irqs; extern void init_VISWS_APIC_irqs(void); extern void setup_IO_APIC(void); extern void disable_IO_APIC(void); -extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn); + +struct io_apic_irq_attr { + int ioapic; + int ioapic_pin; + int trigger; + int polarity; +}; + +static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr, + int ioapic, int ioapic_pin, + int trigger, int polarity) +{ + irq_attr->ioapic = ioapic; + irq_attr->ioapic_pin = ioapic_pin; + irq_attr->trigger = trigger; + irq_attr->polarity = polarity; +} + +extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin, + struct io_apic_irq_attr *irq_attr); extern void setup_ioapic_dest(void); extern void enable_IO_APIC(void); @@ -78,7 +97,11 @@ extern void eisa_set_level_irq(unsigned int irq); /* SMP */ extern void smp_apic_timer_interrupt(struct pt_regs *); extern void smp_spurious_interrupt(struct pt_regs *); +extern void smp_generic_interrupt(struct pt_regs *); extern void smp_error_interrupt(struct pt_regs *); +#ifdef CONFIG_X86_IO_APIC +extern asmlinkage void smp_irq_move_cleanup_interrupt(void); +#endif #ifdef CONFIG_SMP extern void smp_reschedule_interrupt(struct pt_regs *); extern void smp_call_function_interrupt(struct pt_regs *); diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h index 1a99e6c092a..58d7091eeb1 100644 --- a/arch/x86/include/asm/i8259.h +++ b/arch/x86/include/asm/i8259.h @@ -60,8 +60,4 @@ extern struct irq_chip i8259A_chip; extern void mask_8259A(void); extern void unmask_8259A(void); -#ifdef CONFIG_X86_32 -extern void init_ISA_irqs(void); -#endif - #endif /* _ASM_X86_I8259_H */ diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 9d826e43601..daf866ed061 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -154,22 +154,19 @@ extern int timer_through_8259; extern int io_apic_get_unique_id(int ioapic, int apic_id); extern int io_apic_get_version(int ioapic); extern int io_apic_get_redir_entries(int ioapic); -extern int io_apic_set_pci_routing(int ioapic, int pin, int irq, - int edge_level, int active_high_low); #endif /* CONFIG_ACPI */ +struct io_apic_irq_attr; +extern int io_apic_set_pci_routing(struct device *dev, int irq, + struct io_apic_irq_attr *irq_attr); extern int (*ioapic_renumber_irq)(int ioapic, int irq); extern void ioapic_init_mappings(void); -#ifdef CONFIG_X86_64 extern struct IO_APIC_route_entry **alloc_ioapic_entries(void); extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries); extern int save_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries); extern void mask_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries); extern int restore_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries); -extern void reinit_intr_remapped_IO_APIC(int intr_remapping, - struct IO_APIC_route_entry **ioapic_entries); -#endif extern void probe_nr_irqs_gsi(void); diff --git a/arch/x86/include/asm/iomap.h b/arch/x86/include/asm/iomap.h index 86af26091d6..0e9fe1d9d97 100644 --- a/arch/x86/include/asm/iomap.h +++ b/arch/x86/include/asm/iomap.h @@ -1,3 +1,6 @@ +#ifndef _ASM_X86_IOMAP_H +#define _ASM_X86_IOMAP_H + /* * Copyright © 2008 Ingo Molnar * @@ -31,3 +34,5 @@ iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot); void iounmap_atomic(void *kvaddr, enum km_type type); + +#endif /* _ASM_X86_IOMAP_H */ diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h index 0396760fccb..f275e224450 100644 --- a/arch/x86/include/asm/irq_remapping.h +++ b/arch/x86/include/asm/irq_remapping.h @@ -1,6 +1,6 @@ #ifndef _ASM_X86_IRQ_REMAPPING_H #define _ASM_X86_IRQ_REMAPPING_H -#define IRTE_DEST(dest) ((x2apic) ? dest : dest << 8) +#define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8) #endif /* _ASM_X86_IRQ_REMAPPING_H */ diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h index 3cbd79bbb47..910b5a3d675 100644 --- a/arch/x86/include/asm/irq_vectors.h +++ b/arch/x86/include/asm/irq_vectors.h @@ -34,6 +34,7 @@ #ifdef CONFIG_X86_32 # define SYSCALL_VECTOR 0x80 +# define IA32_SYSCALL_VECTOR 0x80 #else # define IA32_SYSCALL_VECTOR 0x80 #endif diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h index 642fc7fc8cd..e2a1bb6d71e 100644 --- a/arch/x86/include/asm/mpspec.h +++ b/arch/x86/include/asm/mpspec.h @@ -61,9 +61,11 @@ extern void get_smp_config(void); #ifdef CONFIG_X86_MPPARSE extern void find_smp_config(void); extern void early_reserve_e820_mpc_new(void); +extern int enable_update_mptable; #else static inline void find_smp_config(void) { } static inline void early_reserve_e820_mpc_new(void) { } +#define enable_update_mptable 0 #endif void __cpuinit generic_processor_info(int apicid, int version); @@ -72,20 +74,13 @@ extern void mp_register_ioapic(int id, u32 address, u32 gsi_base); extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi); extern void mp_config_acpi_legacy_irqs(void); -extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low); +struct device; +extern int mp_register_gsi(struct device *dev, u32 gsi, int edge_level, + int active_high_low); extern int acpi_probe_gsi(void); #ifdef CONFIG_X86_IO_APIC -extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin, - u32 gsi, int triggering, int polarity); extern int mp_find_ioapic(int gsi); extern int mp_find_ioapic_pin(int ioapic, int gsi); -#else -static inline int -mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin, - u32 gsi, int triggering, int polarity) -{ - return 0; -} #endif #else /* !CONFIG_ACPI: */ static inline int acpi_probe_gsi(void) diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index ec41fc16c16..4d58d04fca8 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -121,7 +121,6 @@ #define MSR_K8_TOP_MEM1 0xc001001a #define MSR_K8_TOP_MEM2 0xc001001d #define MSR_K8_SYSCFG 0xc0010010 -#define MSR_K8_HWCR 0xc0010015 #define MSR_K8_INT_PENDING_MSG 0xc0010055 /* C1E active bits in int pending message */ #define K8_INTP_C1E_ACTIVE_MASK 0x18000000 diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h index c45a0a568df..c9726440993 100644 --- a/arch/x86/include/asm/nmi.h +++ b/arch/x86/include/asm/nmi.h @@ -64,7 +64,7 @@ static inline int nmi_watchdog_active(void) * but since they are power of two we could use a * cheaper way --cvg */ - return nmi_watchdog & 0x3; + return nmi_watchdog & (NMI_LOCAL_APIC | NMI_IO_APIC); } #endif diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h index d38c91b7024..e11900f2500 100644 --- a/arch/x86/include/asm/page_64_types.h +++ b/arch/x86/include/asm/page_64_types.h @@ -32,17 +32,9 @@ */ #define __PAGE_OFFSET _AC(0xffff880000000000, UL) -#define __PHYSICAL_START CONFIG_PHYSICAL_START -#define __KERNEL_ALIGN 0x200000 - -/* - * Make sure kernel is aligned to 2MB address. Catching it at compile - * time is better. Change your config file and compile the kernel - * for a 2MB aligned address (CONFIG_PHYSICAL_START) - */ -#if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0 -#error "CONFIG_PHYSICAL_START must be a multiple of 2MB" -#endif +#define __PHYSICAL_START ((CONFIG_PHYSICAL_START + \ + (CONFIG_PHYSICAL_ALIGN - 1)) & \ + ~(CONFIG_PHYSICAL_ALIGN - 1)) #define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START) #define __START_KERNEL_map _AC(0xffffffff80000000, UL) diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h index 29d96d168bc..3f8d09d94eb 100644 --- a/arch/x86/include/asm/pgtable.h +++ b/arch/x86/include/asm/pgtable.h @@ -503,6 +503,8 @@ static inline int pgd_none(pgd_t pgd) #ifndef __ASSEMBLY__ +extern int direct_gbpages; + /* local pte updates need not use xchg for locking */ static inline pte_t native_local_ptep_get_and_clear(pte_t *ptep) { diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h index 6b87bc6d501..abde308fdb0 100644 --- a/arch/x86/include/asm/pgtable_64.h +++ b/arch/x86/include/asm/pgtable_64.h @@ -25,10 +25,6 @@ extern pgd_t init_level4_pgt[]; extern void paging_init(void); -#endif /* !__ASSEMBLY__ */ - -#ifndef __ASSEMBLY__ - #define pte_ERROR(e) \ printk("%s:%d: bad pte %p(%016lx).\n", \ __FILE__, __LINE__, &(e), pte_val(e)) @@ -135,8 +131,6 @@ static inline int pgd_large(pgd_t pgd) { return 0; } #define update_mmu_cache(vma, address, pte) do { } while (0) -extern int direct_gbpages; - /* Encode and de-code a swap entry */ #if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE #define SWP_TYPE_BITS (_PAGE_BIT_FILE - _PAGE_BIT_PRESENT - 1) diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index c2cceae709c..87ede2f31bc 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -135,7 +135,8 @@ extern struct cpuinfo_x86 boot_cpu_data; extern struct cpuinfo_x86 new_cpu_data; extern struct tss_struct doublefault_tss; -extern __u32 cleared_cpu_caps[NCAPINTS]; +extern __u32 cpu_caps_cleared[NCAPINTS]; +extern __u32 cpu_caps_set[NCAPINTS]; #ifdef CONFIG_SMP DECLARE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info); @@ -409,9 +410,6 @@ DECLARE_PER_CPU(unsigned long, stack_canary); extern unsigned int xstate_size; extern void free_thread_xstate(struct task_struct *); extern struct kmem_cache *task_xstate_cachep; -extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c); -extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c); -extern unsigned short num_cache_leaves; struct thread_struct { /* Cached TLS descriptors: */ @@ -427,8 +425,12 @@ struct thread_struct { unsigned short fsindex; unsigned short gsindex; #endif +#ifdef CONFIG_X86_32 unsigned long ip; +#endif +#ifdef CONFIG_X86_64 unsigned long fs; +#endif unsigned long gs; /* Hardware debugging registers: */ unsigned long debugreg0; @@ -814,6 +816,7 @@ extern unsigned int BIOS_revision; /* Boot loader type from the setup header: */ extern int bootloader_type; +extern int bootloader_version; extern char ignore_fpu_irq; @@ -874,7 +877,6 @@ static inline void spin_lock_prefetch(const void *x) .vm86_info = NULL, \ .sysenter_cs = __KERNEL_CS, \ .io_bitmap_ptr = NULL, \ - .fs = __KERNEL_PERCPU, \ } /* diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h index bdc2ada05ae..4093d1ed6db 100644 --- a/arch/x86/include/asm/setup.h +++ b/arch/x86/include/asm/setup.h @@ -33,7 +33,6 @@ struct x86_quirks { int (*setup_ioapic_ids)(void); }; -extern void x86_quirk_pre_intr_init(void); extern void x86_quirk_intr_init(void); extern void x86_quirk_trap_init(void); diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h index 19e0d88b966..6a84ed166ae 100644 --- a/arch/x86/include/asm/smp.h +++ b/arch/x86/include/asm/smp.h @@ -180,7 +180,7 @@ extern int safe_smp_processor_id(void); static inline int logical_smp_processor_id(void) { /* we don't want to mark this access volatile - bad code generation */ - return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR)); + return GET_APIC_LOGICAL_ID(apic_read(APIC_LDR)); } #endif diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h index 7043408f690..372b76edd63 100644 --- a/arch/x86/include/asm/syscalls.h +++ b/arch/x86/include/asm/syscalls.h @@ -1,7 +1,7 @@ /* * syscalls.h - Linux syscall interfaces (arch-specific) * - * Copyright (c) 2008 Jaswinder Singh + * Copyright (c) 2008 Jaswinder Singh Rajput * * This file is released under the GPLv2. * See the file COPYING for more details. @@ -12,50 +12,55 @@ #include <linux/compiler.h> #include <linux/linkage.h> -#include <linux/types.h> #include <linux/signal.h> +#include <linux/types.h> /* Common in X86_32 and X86_64 */ /* kernel/ioport.c */ asmlinkage long sys_ioperm(unsigned long, unsigned long, int); +/* kernel/process.c */ +int sys_fork(struct pt_regs *); +int sys_vfork(struct pt_regs *); + /* kernel/ldt.c */ asmlinkage int sys_modify_ldt(int, void __user *, unsigned long); +/* kernel/signal.c */ +long sys_rt_sigreturn(struct pt_regs *); + /* kernel/tls.c */ asmlinkage int sys_set_thread_area(struct user_desc __user *); asmlinkage int sys_get_thread_area(struct user_desc __user *); /* X86_32 only */ #ifdef CONFIG_X86_32 +/* kernel/ioport.c */ +long sys_iopl(struct pt_regs *); + /* kernel/process_32.c */ -int sys_fork(struct pt_regs *); int sys_clone(struct pt_regs *); -int sys_vfork(struct pt_regs *); int sys_execve(struct pt_regs *); -/* kernel/signal_32.c */ +/* kernel/signal.c */ asmlinkage int sys_sigsuspend(int, int, old_sigset_t); asmlinkage int sys_sigaction(int, const struct old_sigaction __user *, struct old_sigaction __user *); int sys_sigaltstack(struct pt_regs *); unsigned long sys_sigreturn(struct pt_regs *); -long sys_rt_sigreturn(struct pt_regs *); - -/* kernel/ioport.c */ -long sys_iopl(struct pt_regs *); /* kernel/sys_i386_32.c */ +struct mmap_arg_struct; +struct sel_arg_struct; +struct oldold_utsname; +struct old_utsname; + asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long); -struct mmap_arg_struct; asmlinkage int old_mmap(struct mmap_arg_struct __user *); -struct sel_arg_struct; asmlinkage int old_select(struct sel_arg_struct __user *); asmlinkage int sys_ipc(uint, int, int, int, void __user *, long); -struct old_utsname; asmlinkage int sys_uname(struct old_utsname __user *); -struct oldold_utsname; asmlinkage int sys_olduname(struct oldold_utsname __user *); /* kernel/vm86_32.c */ @@ -65,29 +70,27 @@ int sys_vm86(struct pt_regs *); #else /* CONFIG_X86_32 */ /* X86_64 only */ +/* kernel/ioport.c */ +asmlinkage long sys_iopl(unsigned int, struct pt_regs *); + /* kernel/process_64.c */ -asmlinkage long sys_fork(struct pt_regs *); asmlinkage long sys_clone(unsigned long, unsigned long, void __user *, void __user *, struct pt_regs *); -asmlinkage long sys_vfork(struct pt_regs *); asmlinkage long sys_execve(char __user *, char __user * __user *, char __user * __user *, struct pt_regs *); long sys_arch_prctl(int, unsigned long); -/* kernel/ioport.c */ -asmlinkage long sys_iopl(unsigned int, struct pt_regs *); - -/* kernel/signal_64.c */ +/* kernel/signal.c */ asmlinkage long sys_sigaltstack(const stack_t __user *, stack_t __user *, struct pt_regs *); -long sys_rt_sigreturn(struct pt_regs *); /* kernel/sys_x86_64.c */ +struct new_utsname; + asmlinkage long sys_mmap(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long); -struct new_utsname; asmlinkage long sys_uname(struct new_utsname __user *); #endif /* CONFIG_X86_32 */ diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index f44b49abca4..066ef590d7e 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -203,7 +203,8 @@ struct pci_bus; void x86_pci_root_bus_res_quirks(struct pci_bus *b); #ifdef CONFIG_SMP -#define mc_capable() (cpumask_weight(cpu_core_mask(0)) != nr_cpu_ids) +#define mc_capable() ((boot_cpu_data.x86_max_cores > 1) && \ + (cpumask_weight(cpu_core_mask(0)) != nr_cpu_ids)) #define smt_capable() (smp_num_siblings > 1) #endif diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h index 0d5342515b8..9aa3ab26205 100644 --- a/arch/x86/include/asm/traps.h +++ b/arch/x86/include/asm/traps.h @@ -74,7 +74,6 @@ static inline int get_si_code(unsigned long condition) } extern int panic_on_unrecovered_nmi; -extern int kstack_depth_to_print; void math_error(void __user *); void math_emulate(struct math_emu_info *); diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 88d1bfc847d..235f5927bb9 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -28,7 +28,7 @@ CFLAGS_paravirt.o := $(nostackp) obj-y := process_$(BITS).o signal.o entry_$(BITS).o obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o dumpstack.o -obj-y += setup.o i8259.o irqinit_$(BITS).o +obj-y += setup.o i8259.o irqinit.o obj-$(CONFIG_X86_VISWS) += visws_quirks.o obj-$(CONFIG_X86_32) += probe_roms_32.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 723989d7f80..631086159c5 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -33,6 +33,7 @@ #include <linux/irq.h> #include <linux/bootmem.h> #include <linux/ioport.h> +#include <linux/pci.h> #include <asm/pgtable.h> #include <asm/io_apic.h> @@ -522,7 +523,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) * success: return IRQ number (>=0) * failure: return < 0 */ -int acpi_register_gsi(u32 gsi, int triggering, int polarity) +int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) { unsigned int irq; unsigned int plat_gsi = gsi; @@ -532,14 +533,14 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity) * Make sure all (legacy) PCI IRQs are set as level-triggered. */ if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) { - if (triggering == ACPI_LEVEL_SENSITIVE) + if (trigger == ACPI_LEVEL_SENSITIVE) eisa_set_level_irq(gsi); } #endif #ifdef CONFIG_X86_IO_APIC if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) { - plat_gsi = mp_register_gsi(gsi, triggering, polarity); + plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity); } #endif acpi_gsi_to_irq(plat_gsi, &irq); @@ -903,10 +904,8 @@ extern int es7000_plat; #endif static struct { - int apic_id; int gsi_base; int gsi_end; - DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); } mp_ioapic_routing[MAX_IO_APICS]; int mp_find_ioapic(int gsi) @@ -986,16 +985,12 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); mp_ioapics[idx].apicid = uniq_ioapic_id(id); -#ifdef CONFIG_X86_32 mp_ioapics[idx].apicver = io_apic_get_version(idx); -#else - mp_ioapics[idx].apicver = 0; -#endif + /* * Build basic GSI lookup table to facilitate gsi->io_apic lookups * and to prevent reprogramming of IOAPIC pins (PCI GSIs). */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid; mp_ioapic_routing[idx].gsi_base = gsi_base; mp_ioapic_routing[idx].gsi_end = gsi_base + io_apic_get_redir_entries(idx); @@ -1158,26 +1153,52 @@ void __init mp_config_acpi_legacy_irqs(void) } } -int mp_register_gsi(u32 gsi, int triggering, int polarity) +static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger, + int polarity) { +#ifdef CONFIG_X86_MPPARSE + struct mpc_intsrc mp_irq; + struct pci_dev *pdev; + unsigned char number; + unsigned int devfn; int ioapic; - int ioapic_pin; -#ifdef CONFIG_X86_32 -#define MAX_GSI_NUM 4096 -#define IRQ_COMPRESSION_START 64 + u8 pin; - static int pci_irq = IRQ_COMPRESSION_START; - /* - * Mapping between Global System Interrupts, which - * represent all possible interrupts, and IRQs - * assigned to actual devices. - */ - static int gsi_to_irq[MAX_GSI_NUM]; -#else + if (!acpi_ioapic) + return 0; + if (!dev) + return 0; + if (dev->bus != &pci_bus_type) + return 0; + + pdev = to_pci_dev(dev); + number = pdev->bus->number; + devfn = pdev->devfn; + pin = pdev->pin; + /* print the entry should happen on mptable identically */ + mp_irq.type = MP_INTSRC; + mp_irq.irqtype = mp_INT; + mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | + (polarity == ACPI_ACTIVE_HIGH ? 1 : 3); + mp_irq.srcbus = number; + mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); + ioapic = mp_find_ioapic(gsi); + mp_irq.dstapic = mp_ioapics[ioapic].apicid; + mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi); + + save_mp_irq(&mp_irq); +#endif + return 0; +} + +int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) +{ + int ioapic; + int ioapic_pin; + struct io_apic_irq_attr irq_attr; if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) return gsi; -#endif /* Don't set up the ACPI SCI because it's already set up */ if (acpi_gbl_FADT.sci_interrupt == gsi) @@ -1196,93 +1217,22 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity) gsi = ioapic_renumber_irq(ioapic, gsi); #endif - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ if (ioapic_pin > MP_MAX_IOAPIC_PIN) { printk(KERN_ERR "Invalid reference to IOAPIC pin " - "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, + "%d-%d\n", mp_ioapics[ioapic].apicid, ioapic_pin); return gsi; } - if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { - pr_debug("Pin %d-%d already programmed\n", - mp_ioapic_routing[ioapic].apic_id, ioapic_pin); -#ifdef CONFIG_X86_32 - return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); -#else - return gsi; -#endif - } - - set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed); -#ifdef CONFIG_X86_32 - /* - * For GSI >= 64, use IRQ compression - */ - if ((gsi >= IRQ_COMPRESSION_START) - && (triggering == ACPI_LEVEL_SENSITIVE)) { - /* - * For PCI devices assign IRQs in order, avoiding gaps - * due to unused I/O APIC pins. - */ - int irq = gsi; - if (gsi < MAX_GSI_NUM) { - /* - * Retain the VIA chipset work-around (gsi > 15), but - * avoid a problem where the 8254 timer (IRQ0) is setup - * via an override (so it's not on pin 0 of the ioapic), - * and at the same time, the pin 0 interrupt is a PCI - * type. The gsi > 15 test could cause these two pins - * to be shared as IRQ0, and they are not shareable. - * So test for this condition, and if necessary, avoid - * the pin collision. - */ - gsi = pci_irq++; - /* - * Don't assign IRQ used by ACPI SCI - */ - if (gsi == acpi_gbl_FADT.sci_interrupt) - gsi = pci_irq++; - gsi_to_irq[irq] = gsi; - } else { - printk(KERN_ERR "GSI %u is too high\n", gsi); - return gsi; - } - } -#endif - io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, - triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, - polarity == ACPI_ACTIVE_HIGH ? 0 : 1); - return gsi; -} -int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin, - u32 gsi, int triggering, int polarity) -{ -#ifdef CONFIG_X86_MPPARSE - struct mpc_intsrc mp_irq; - int ioapic; + if (enable_update_mptable) + mp_config_acpi_gsi(dev, gsi, trigger, polarity); - if (!acpi_ioapic) - return 0; + set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin, + trigger == ACPI_EDGE_SENSITIVE ? 0 : 1, + polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + io_apic_set_pci_routing(dev, gsi, &irq_attr); - /* print the entry should happen on mptable identically */ - mp_irq.type = MP_INTSRC; - mp_irq.irqtype = mp_INT; - mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | - (polarity == ACPI_ACTIVE_HIGH ? 1 : 3); - mp_irq.srcbus = number; - mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); - ioapic = mp_find_ioapic(gsi); - mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id; - mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi); - - save_mp_irq(&mp_irq); -#endif - return 0; + return gsi; } /* diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index f2870920f24..a4c9cf0bf70 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -98,6 +98,29 @@ early_param("lapic", parse_lapic); /* Local APIC was disabled by the BIOS and enabled by the kernel */ static int enabled_via_apicbase; +/* + * Handle interrupt mode configuration register (IMCR). + * This register controls whether the interrupt signals + * that reach the BSP come from the master PIC or from the + * local APIC. Before entering Symmetric I/O Mode, either + * the BIOS or the operating system must switch out of + * PIC Mode by changing the IMCR. + */ +static inline void imcr_pic_to_apic(void) +{ + /* select IMCR register */ + outb(0x70, 0x22); + /* NMI and 8259 INTR go through APIC */ + outb(0x01, 0x23); +} + +static inline void imcr_apic_to_pic(void) +{ + /* select IMCR register */ + outb(0x70, 0x22); + /* NMI and 8259 INTR go directly to BSP */ + outb(0x00, 0x23); +} #endif #ifdef CONFIG_X86_64 @@ -111,13 +134,19 @@ static __init int setup_apicpmtimer(char *s) __setup("apicpmtimer", setup_apicpmtimer); #endif +int x2apic_mode; #ifdef CONFIG_X86_X2APIC -int x2apic; /* x2apic enabled before OS handover */ static int x2apic_preenabled; static int disable_x2apic; static __init int setup_nox2apic(char *str) { + if (x2apic_enabled()) { + pr_warning("Bios already enabled x2apic, " + "can't enforce nox2apic"); + return 0; + } + disable_x2apic = 1; setup_clear_cpu_cap(X86_FEATURE_X2APIC); return 0; @@ -209,6 +238,31 @@ static int modern_apic(void) return lapic_get_version() >= 0x14; } +/* + * bare function to substitute write operation + * and it's _that_ fast :) + */ +static void native_apic_write_dummy(u32 reg, u32 v) +{ + WARN_ON_ONCE((cpu_has_apic || !disable_apic)); +} + +static u32 native_apic_read_dummy(u32 reg) +{ + WARN_ON_ONCE((cpu_has_apic && !disable_apic)); + return 0; +} + +/* + * right after this call apic->write/read doesn't do anything + * note that there is no restore operation it works one way + */ +void apic_disable(void) +{ + apic->read = native_apic_read_dummy; + apic->write = native_apic_write_dummy; +} + void native_apic_wait_icr_idle(void) { while (apic_read(APIC_ICR) & APIC_ICR_BUSY) @@ -348,7 +402,7 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask) { - unsigned long reg = (lvt_off << 4) + APIC_EILVT0; + unsigned long reg = (lvt_off << 4) + APIC_EILVTn(0); unsigned int v = (mask << 16) | (msg_type << 8) | vector; apic_write(reg, v); @@ -815,7 +869,7 @@ void clear_local_APIC(void) u32 v; /* APIC hasn't been mapped yet */ - if (!x2apic && !apic_phys) + if (!x2apic_mode && !apic_phys) return; maxlvt = lapic_get_maxlvt(); @@ -1287,7 +1341,7 @@ void check_x2apic(void) { if (x2apic_enabled()) { pr_info("x2apic enabled by BIOS, switching to x2apic ops\n"); - x2apic_preenabled = x2apic = 1; + x2apic_preenabled = x2apic_mode = 1; } } @@ -1295,7 +1349,7 @@ void enable_x2apic(void) { int msr, msr2; - if (!x2apic) + if (!x2apic_mode) return; rdmsr(MSR_IA32_APICBASE, msr, msr2); @@ -1304,6 +1358,7 @@ void enable_x2apic(void) wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0); } } +#endif /* CONFIG_X86_X2APIC */ void __init enable_IR_x2apic(void) { @@ -1312,32 +1367,21 @@ void __init enable_IR_x2apic(void) unsigned long flags; struct IO_APIC_route_entry **ioapic_entries = NULL; - if (!cpu_has_x2apic) - return; - - if (!x2apic_preenabled && disable_x2apic) { - pr_info("Skipped enabling x2apic and Interrupt-remapping " - "because of nox2apic\n"); - return; + ret = dmar_table_init(); + if (ret) { + pr_debug("dmar_table_init() failed with %d:\n", ret); + goto ir_failed; } - if (x2apic_preenabled && disable_x2apic) - panic("Bios already enabled x2apic, can't enforce nox2apic"); - - if (!x2apic_preenabled && skip_ioapic_setup) { - pr_info("Skipped enabling x2apic and Interrupt-remapping " - "because of skipping io-apic setup\n"); - return; + if (!intr_remapping_supported()) { + pr_debug("intr-remapping not supported\n"); + goto ir_failed; } - ret = dmar_table_init(); - if (ret) { - pr_info("dmar_table_init() failed with %d:\n", ret); - if (x2apic_preenabled) - panic("x2apic enabled by bios. But IR enabling failed"); - else - pr_info("Not enabling x2apic,Intr-remapping\n"); + if (!x2apic_preenabled && skip_ioapic_setup) { + pr_info("Skipped enabling intr-remap because of skipping " + "io-apic setup\n"); return; } @@ -1357,19 +1401,16 @@ void __init enable_IR_x2apic(void) mask_IO_APIC_setup(ioapic_entries); mask_8259A(); - ret = enable_intr_remapping(EIM_32BIT_APIC_ID); - - if (ret && x2apic_preenabled) { - local_irq_restore(flags); - panic("x2apic enabled by bios. But IR enabling failed"); - } - + ret = enable_intr_remapping(x2apic_supported()); if (ret) goto end_restore; - if (!x2apic) { - x2apic = 1; + pr_info("Enabled Interrupt-remapping\n"); + + if (x2apic_supported() && !x2apic_mode) { + x2apic_mode = 1; enable_x2apic(); + pr_info("Enabled x2apic\n"); } end_restore: @@ -1378,37 +1419,34 @@ end_restore: * IR enabling failed */ restore_IO_APIC_setup(ioapic_entries); - else - reinit_intr_remapped_IO_APIC(x2apic_preenabled, ioapic_entries); unmask_8259A(); local_irq_restore(flags); end: - if (!ret) { - if (!x2apic_preenabled) - pr_info("Enabled x2apic and interrupt-remapping\n"); - else - pr_info("Enabled Interrupt-remapping\n"); - } else - pr_err("Failed to enable Interrupt-remapping and x2apic\n"); if (ioapic_entries) free_ioapic_entries(ioapic_entries); + + if (!ret) + return; + +ir_failed: + if (x2apic_preenabled) + panic("x2apic enabled by bios. But IR enabling failed"); + else if (cpu_has_x2apic) + pr_info("Not enabling x2apic,Intr-remapping\n"); #else if (!cpu_has_x2apic) return; if (x2apic_preenabled) panic("x2apic enabled prior OS handover," - " enable CONFIG_INTR_REMAP"); - - pr_info("Enable CONFIG_INTR_REMAP for enabling intr-remapping " - " and x2apic\n"); + " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP"); #endif return; } -#endif /* CONFIG_X86_X2APIC */ + #ifdef CONFIG_X86_64 /* @@ -1425,7 +1463,6 @@ static int __init detect_init_APIC(void) } mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - boot_cpu_physical_apicid = 0; return 0; } #else @@ -1539,32 +1576,49 @@ void __init early_init_lapic_mapping(void) */ void __init init_apic_mappings(void) { - if (x2apic) { + unsigned int new_apicid; + + if (x2apic_mode) { boot_cpu_physical_apicid = read_apic_id(); return; } - /* - * If no local APIC can be found then set up a fake all - * zeroes page to simulate the local APIC and another - * one for the IO-APIC. - */ + /* If no local APIC can be found return early */ if (!smp_found_config && detect_init_APIC()) { - apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); - apic_phys = __pa(apic_phys); - } else + /* lets NOP'ify apic operations */ + pr_info("APIC: disable apic facility\n"); + apic_disable(); + } else { apic_phys = mp_lapic_addr; - set_fixmap_nocache(FIX_APIC_BASE, apic_phys); - apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n", - APIC_BASE, apic_phys); + /* + * acpi lapic path already maps that address in + * acpi_register_lapic_address() + */ + if (!acpi_lapic) + set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + + apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n", + APIC_BASE, apic_phys); + } /* * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ - if (boot_cpu_physical_apicid == -1U) - boot_cpu_physical_apicid = read_apic_id(); + new_apicid = read_apic_id(); + if (boot_cpu_physical_apicid != new_apicid) { + boot_cpu_physical_apicid = new_apicid; + /* + * yeah -- we lie about apic_version + * in case if apic was disabled via boot option + * but it's not a problem for SMP compiled kernel + * since smp_sanity_check is prepared for such a case + * and disable smp mode + */ + apic_version[new_apicid] = + GET_APIC_VERSION(apic_read(APIC_LVR)); + } } /* @@ -1733,8 +1787,7 @@ void __init connect_bsp_APIC(void) */ apic_printk(APIC_VERBOSE, "leaving PIC mode, " "enabling APIC mode.\n"); - outb(0x70, 0x22); - outb(0x01, 0x23); + imcr_pic_to_apic(); } #endif if (apic->enable_apic_mode) @@ -1762,8 +1815,7 @@ void disconnect_bsp_APIC(int virt_wire_setup) */ apic_printk(APIC_VERBOSE, "disabling APIC mode, " "entering PIC mode.\n"); - outb(0x70, 0x22); - outb(0x00, 0x23); + imcr_apic_to_pic(); return; } #endif @@ -1969,10 +2021,10 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) local_irq_save(flags); disable_local_APIC(); -#ifdef CONFIG_INTR_REMAP + if (intr_remapping_enabled) disable_intr_remapping(); -#endif + local_irq_restore(flags); return 0; } @@ -1982,42 +2034,34 @@ static int lapic_resume(struct sys_device *dev) unsigned int l, h; unsigned long flags; int maxlvt; - -#ifdef CONFIG_INTR_REMAP - int ret; + int ret = 0; struct IO_APIC_route_entry **ioapic_entries = NULL; if (!apic_pm_state.active) return 0; local_irq_save(flags); - if (x2apic) { + if (intr_remapping_enabled) { ioapic_entries = alloc_ioapic_entries(); if (!ioapic_entries) { WARN(1, "Alloc ioapic_entries in lapic resume failed."); - return -ENOMEM; + ret = -ENOMEM; + goto restore; } ret = save_IO_APIC_setup(ioapic_entries); if (ret) { WARN(1, "Saving IO-APIC state failed: %d\n", ret); free_ioapic_entries(ioapic_entries); - return ret; + goto restore; } mask_IO_APIC_setup(ioapic_entries); mask_8259A(); - enable_x2apic(); } -#else - if (!apic_pm_state.active) - return 0; - local_irq_save(flags); - if (x2apic) + if (x2apic_mode) enable_x2apic(); -#endif - else { /* * Make sure the APICBASE points to the right address @@ -2055,21 +2099,16 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_ESR, 0); apic_read(APIC_ESR); -#ifdef CONFIG_INTR_REMAP - if (intr_remapping_enabled) - reenable_intr_remapping(EIM_32BIT_APIC_ID); - - if (x2apic) { + if (intr_remapping_enabled) { + reenable_intr_remapping(x2apic_mode); unmask_8259A(); restore_IO_APIC_setup(ioapic_entries); free_ioapic_entries(ioapic_entries); } -#endif - +restore: local_irq_restore(flags); - - return 0; + return ret; } /* @@ -2117,31 +2156,14 @@ static void apic_pm_activate(void) { } #endif /* CONFIG_PM */ #ifdef CONFIG_X86_64 -/* - * apic_is_clustered_box() -- Check if we can expect good TSC - * - * Thus far, the major user of this is IBM's Summit2 series: - * - * Clustered boxes may have unsynced TSC problems if they are - * multi-chassis. Use available data to take a good guess. - * If in doubt, go HPET. - */ -__cpuinit int apic_is_clustered_box(void) + +static int __cpuinit apic_cluster_num(void) { int i, clusters, zeros; unsigned id; u16 *bios_cpu_apicid; DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS); - /* - * there is not this kind of box with AMD CPU yet. - * Some AMD box with quadcore cpu and 8 sockets apicid - * will be [4, 0x23] or [8, 0x27] could be thought to - * vsmp box still need checking... - */ - if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box()) - return 0; - bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid); bitmap_zero(clustermap, NUM_APIC_CLUSTERS); @@ -2177,18 +2199,67 @@ __cpuinit int apic_is_clustered_box(void) ++zeros; } - /* ScaleMP vSMPowered boxes have one cluster per board and TSCs are - * not guaranteed to be synced between boards - */ - if (is_vsmp_box() && clusters > 1) + return clusters; +} + +static int __cpuinitdata multi_checked; +static int __cpuinitdata multi; + +static int __cpuinit set_multi(const struct dmi_system_id *d) +{ + if (multi) + return 0; + pr_info("APIC: %s detected, Multi Chassis\n", d->ident); + multi = 1; + return 0; +} + +static const __cpuinitconst struct dmi_system_id multi_dmi_table[] = { + { + .callback = set_multi, + .ident = "IBM System Summit2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "IBM"), + DMI_MATCH(DMI_PRODUCT_NAME, "Summit2"), + }, + }, + {} +}; + +static void __cpuinit dmi_check_multi(void) +{ + if (multi_checked) + return; + + dmi_check_system(multi_dmi_table); + multi_checked = 1; +} + +/* + * apic_is_clustered_box() -- Check if we can expect good TSC + * + * Thus far, the major user of this is IBM's Summit2 series: + * Clustered boxes may have unsynced TSC problems if they are + * multi-chassis. + * Use DMI to check them + */ +__cpuinit int apic_is_clustered_box(void) +{ + dmi_check_multi(); + if (multi) return 1; + if (!is_vsmp_box()) + return 0; + /* - * If clusters > 2, then should be multi-chassis. - * May have to revisit this when multi-core + hyperthreaded CPUs come - * out, but AFAIK this will work even for them. + * ScaleMP vSMPowered boxes have one cluster per board and TSCs are + * not guaranteed to be synced between boards */ - return (clusters > 2); + if (apic_cluster_num() > 1) + return 1; + + return 0; } #endif diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c index 306e5e88fb6..d0c99abc26c 100644 --- a/arch/x86/kernel/apic/apic_flat_64.c +++ b/arch/x86/kernel/apic/apic_flat_64.c @@ -161,7 +161,7 @@ static int flat_apic_id_registered(void) static int flat_phys_pkg_id(int initial_apic_id, int index_msb) { - return hard_smp_processor_id() >> index_msb; + return initial_apic_id >> index_msb; } struct apic apic_flat = { @@ -235,7 +235,7 @@ static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) * regardless of how many processors are present (x86_64 ES7000 * is an example). */ - if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID && + if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID && (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) { printk(KERN_DEBUG "system APIC only can use physical flat"); return 1; diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 30294777557..69328ac8de9 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -145,7 +145,7 @@ es7000_rename_gsi(int ioapic, int gsi) return gsi; } -static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip) +static int __cpuinit wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip) { unsigned long vect = 0, psaival = 0; diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 30da617d18e..1946fac42ab 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -59,6 +59,7 @@ #include <asm/setup.h> #include <asm/irq_remapping.h> #include <asm/hpet.h> +#include <asm/hw_irq.h> #include <asm/uv/uv_hub.h> #include <asm/uv/uv_irq.h> @@ -129,12 +130,9 @@ struct irq_pin_list { struct irq_pin_list *next; }; -static struct irq_pin_list *get_one_free_irq_2_pin(int cpu) +static struct irq_pin_list *get_one_free_irq_2_pin(int node) { struct irq_pin_list *pin; - int node; - - node = cpu_to_node(cpu); pin = kzalloc_node(sizeof(*pin), GFP_ATOMIC, node); @@ -148,9 +146,6 @@ struct irq_cfg { unsigned move_cleanup_count; u8 vector; u8 move_in_progress : 1; -#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC - u8 move_desc_pending : 1; -#endif }; /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */ @@ -212,12 +207,9 @@ static struct irq_cfg *irq_cfg(unsigned int irq) return cfg; } -static struct irq_cfg *get_one_free_irq_cfg(int cpu) +static struct irq_cfg *get_one_free_irq_cfg(int node) { struct irq_cfg *cfg; - int node; - - node = cpu_to_node(cpu); cfg = kzalloc_node(sizeof(*cfg), GFP_ATOMIC, node); if (cfg) { @@ -238,13 +230,13 @@ static struct irq_cfg *get_one_free_irq_cfg(int cpu) return cfg; } -int arch_init_chip_data(struct irq_desc *desc, int cpu) +int arch_init_chip_data(struct irq_desc *desc, int node) { struct irq_cfg *cfg; cfg = desc->chip_data; if (!cfg) { - desc->chip_data = get_one_free_irq_cfg(cpu); + desc->chip_data = get_one_free_irq_cfg(node); if (!desc->chip_data) { printk(KERN_ERR "can not alloc irq_cfg\n"); BUG_ON(1); @@ -254,10 +246,9 @@ int arch_init_chip_data(struct irq_desc *desc, int cpu) return 0; } -#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC - +/* for move_irq_desc */ static void -init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu) +init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int node) { struct irq_pin_list *old_entry, *head, *tail, *entry; @@ -266,7 +257,7 @@ init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu) if (!old_entry) return; - entry = get_one_free_irq_2_pin(cpu); + entry = get_one_free_irq_2_pin(node); if (!entry) return; @@ -276,7 +267,7 @@ init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu) tail = entry; old_entry = old_entry->next; while (old_entry) { - entry = get_one_free_irq_2_pin(cpu); + entry = get_one_free_irq_2_pin(node); if (!entry) { entry = head; while (entry) { @@ -316,12 +307,12 @@ static void free_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg) } void arch_init_copy_chip_data(struct irq_desc *old_desc, - struct irq_desc *desc, int cpu) + struct irq_desc *desc, int node) { struct irq_cfg *cfg; struct irq_cfg *old_cfg; - cfg = get_one_free_irq_cfg(cpu); + cfg = get_one_free_irq_cfg(node); if (!cfg) return; @@ -332,7 +323,7 @@ void arch_init_copy_chip_data(struct irq_desc *old_desc, memcpy(cfg, old_cfg, sizeof(struct irq_cfg)); - init_copy_irq_2_pin(old_cfg, cfg, cpu); + init_copy_irq_2_pin(old_cfg, cfg, node); } static void free_irq_cfg(struct irq_cfg *old_cfg) @@ -356,19 +347,7 @@ void arch_free_chip_data(struct irq_desc *old_desc, struct irq_desc *desc) old_desc->chip_data = NULL; } } - -static void -set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask) -{ - struct irq_cfg *cfg = desc->chip_data; - - if (!cfg->move_in_progress) { - /* it means that domain is not changed */ - if (!cpumask_intersects(desc->affinity, mask)) - cfg->move_desc_pending = 1; - } -} -#endif +/* end for move_irq_desc */ #else static struct irq_cfg *irq_cfg(unsigned int irq) @@ -378,13 +357,6 @@ static struct irq_cfg *irq_cfg(unsigned int irq) #endif -#ifndef CONFIG_NUMA_MIGRATE_IRQ_DESC -static inline void -set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask) -{ -} -#endif - struct io_apic { unsigned int index; unsigned int unused[3]; @@ -518,132 +490,18 @@ static void ioapic_mask_entry(int apic, int pin) spin_unlock_irqrestore(&ioapic_lock, flags); } -#ifdef CONFIG_SMP -static void send_cleanup_vector(struct irq_cfg *cfg) -{ - cpumask_var_t cleanup_mask; - - if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) { - unsigned int i; - cfg->move_cleanup_count = 0; - for_each_cpu_and(i, cfg->old_domain, cpu_online_mask) - cfg->move_cleanup_count++; - for_each_cpu_and(i, cfg->old_domain, cpu_online_mask) - apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR); - } else { - cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask); - cfg->move_cleanup_count = cpumask_weight(cleanup_mask); - apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); - free_cpumask_var(cleanup_mask); - } - cfg->move_in_progress = 0; -} - -static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg) -{ - int apic, pin; - struct irq_pin_list *entry; - u8 vector = cfg->vector; - - entry = cfg->irq_2_pin; - for (;;) { - unsigned int reg; - - if (!entry) - break; - - apic = entry->apic; - pin = entry->pin; - /* - * With interrupt-remapping, destination information comes - * from interrupt-remapping table entry. - */ - if (!irq_remapped(irq)) - io_apic_write(apic, 0x11 + pin*2, dest); - reg = io_apic_read(apic, 0x10 + pin*2); - reg &= ~IO_APIC_REDIR_VECTOR_MASK; - reg |= vector; - io_apic_modify(apic, 0x10 + pin*2, reg); - if (!entry->next) - break; - entry = entry->next; - } -} - -static int -assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask); - -/* - * Either sets desc->affinity to a valid value, and returns - * ->cpu_mask_to_apicid of that, or returns BAD_APICID and - * leaves desc->affinity untouched. - */ -static unsigned int -set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask) -{ - struct irq_cfg *cfg; - unsigned int irq; - - if (!cpumask_intersects(mask, cpu_online_mask)) - return BAD_APICID; - - irq = desc->irq; - cfg = desc->chip_data; - if (assign_irq_vector(irq, cfg, mask)) - return BAD_APICID; - - /* check that before desc->addinity get updated */ - set_extra_move_desc(desc, mask); - - cpumask_copy(desc->affinity, mask); - - return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain); -} - -static void -set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask) -{ - struct irq_cfg *cfg; - unsigned long flags; - unsigned int dest; - unsigned int irq; - - irq = desc->irq; - cfg = desc->chip_data; - - spin_lock_irqsave(&ioapic_lock, flags); - dest = set_desc_affinity(desc, mask); - if (dest != BAD_APICID) { - /* Only the high 8 bits are valid. */ - dest = SET_APIC_LOGICAL_ID(dest); - __target_IO_APIC_irq(irq, dest, cfg); - } - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -static void -set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask) -{ - struct irq_desc *desc; - - desc = irq_to_desc(irq); - - set_ioapic_affinity_irq_desc(desc, mask); -} -#endif /* CONFIG_SMP */ - /* * The common case is 1:1 IRQ<->pin mappings. Sometimes there are * shared ISA-space IRQs, so we have to support them. We are super * fast in the common case, and fast for shared ISA-space IRQs. */ -static void add_pin_to_irq_cpu(struct irq_cfg *cfg, int cpu, int apic, int pin) +static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin) { struct irq_pin_list *entry; entry = cfg->irq_2_pin; if (!entry) { - entry = get_one_free_irq_2_pin(cpu); + entry = get_one_free_irq_2_pin(node); if (!entry) { printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n", apic, pin); @@ -663,7 +521,7 @@ static void add_pin_to_irq_cpu(struct irq_cfg *cfg, int cpu, int apic, int pin) entry = entry->next; } - entry->next = get_one_free_irq_2_pin(cpu); + entry->next = get_one_free_irq_2_pin(node); entry = entry->next; entry->apic = apic; entry->pin = pin; @@ -672,7 +530,7 @@ static void add_pin_to_irq_cpu(struct irq_cfg *cfg, int cpu, int apic, int pin) /* * Reroute an IRQ to a different pin. */ -static void __init replace_pin_at_irq_cpu(struct irq_cfg *cfg, int cpu, +static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node, int oldapic, int oldpin, int newapic, int newpin) { @@ -692,7 +550,7 @@ static void __init replace_pin_at_irq_cpu(struct irq_cfg *cfg, int cpu, /* why? call replace before add? */ if (!replaced) - add_pin_to_irq_cpu(cfg, cpu, newapic, newpin); + add_pin_to_irq_node(cfg, node, newapic, newpin); } static inline void io_apic_modify_irq(struct irq_cfg *cfg, @@ -850,7 +708,6 @@ static int __init ioapic_pirq_setup(char *str) __setup("pirq=", ioapic_pirq_setup); #endif /* CONFIG_X86_32 */ -#ifdef CONFIG_INTR_REMAP struct IO_APIC_route_entry **alloc_ioapic_entries(void) { int apic; @@ -948,20 +805,6 @@ int restore_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries) return 0; } -void reinit_intr_remapped_IO_APIC(int intr_remapping, - struct IO_APIC_route_entry **ioapic_entries) - -{ - /* - * for now plain restore of previous settings. - * TBD: In the case of OS enabling interrupt-remapping, - * IO-APIC RTE's need to be setup to point to interrupt-remapping - * table entries. for now, do a plain restore, and wait for - * the setup_IO_APIC_irqs() to do proper initialization. - */ - restore_IO_APIC_setup(ioapic_entries); -} - void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries) { int apic; @@ -971,7 +814,6 @@ void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries) kfree(ioapic_entries); } -#endif /* * Find the IRQ entry number of a certain pin. @@ -1032,54 +874,6 @@ static int __init find_isa_irq_apic(int irq, int type) return -1; } -/* - * Find a specific PCI IRQ entry. - * Not an __init, possibly needed by modules - */ -static int pin_2_irq(int idx, int apic, int pin); - -int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) -{ - int apic, i, best_guess = -1; - - apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", - bus, slot, pin); - if (test_bit(bus, mp_bus_not_pci)) { - apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus); - return -1; - } - for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].srcbus; - - for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic || - mp_irqs[i].dstapic == MP_APIC_ALL) - break; - - if (!test_bit(lbus, mp_bus_not_pci) && - !mp_irqs[i].irqtype && - (bus == lbus) && - (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq); - - if (!(apic || IO_APIC_IRQ(irq))) - continue; - - if (pin == (mp_irqs[i].srcbusirq & 3)) - return irq; - /* - * Use the first all-but-pin matching entry as a - * best-guess fuzzy result for broken mptables. - */ - if (best_guess < 0) - best_guess = irq; - } - } - return best_guess; -} - -EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); - #if defined(CONFIG_EISA) || defined(CONFIG_MCA) /* * EISA Edge/Level control register, ELCR @@ -1298,6 +1092,64 @@ static int pin_2_irq(int idx, int apic, int pin) return irq; } +/* + * Find a specific PCI IRQ entry. + * Not an __init, possibly needed by modules + */ +int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin, + struct io_apic_irq_attr *irq_attr) +{ + int apic, i, best_guess = -1; + + apic_printk(APIC_DEBUG, + "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", + bus, slot, pin); + if (test_bit(bus, mp_bus_not_pci)) { + apic_printk(APIC_VERBOSE, + "PCI BIOS passed nonexistent PCI bus %d!\n", bus); + return -1; + } + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].srcbus; + + for (apic = 0; apic < nr_ioapics; apic++) + if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic || + mp_irqs[i].dstapic == MP_APIC_ALL) + break; + + if (!test_bit(lbus, mp_bus_not_pci) && + !mp_irqs[i].irqtype && + (bus == lbus) && + (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) { + int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq); + + if (!(apic || IO_APIC_IRQ(irq))) + continue; + + if (pin == (mp_irqs[i].srcbusirq & 3)) { + set_io_apic_irq_attr(irq_attr, apic, + mp_irqs[i].dstirq, + irq_trigger(i), + irq_polarity(i)); + return irq; + } + /* + * Use the first all-but-pin matching entry as a + * best-guess fuzzy result for broken mptables. + */ + if (best_guess < 0) { + set_io_apic_irq_attr(irq_attr, apic, + mp_irqs[i].dstirq, + irq_trigger(i), + irq_polarity(i)); + best_guess = irq; + } + } + } + return best_guess; +} +EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); + void lock_vector_lock(void) { /* Used to the online set of cpus does not change @@ -1628,58 +1480,70 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq ioapic_write_entry(apic_id, pin, entry); } +static struct { + DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); +} mp_ioapic_routing[MAX_IO_APICS]; + static void __init setup_IO_APIC_irqs(void) { - int apic_id, pin, idx, irq; + int apic_id = 0, pin, idx, irq; int notcon = 0; struct irq_desc *desc; struct irq_cfg *cfg; - int cpu = boot_cpu_id; + int node = cpu_to_node(boot_cpu_id); apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); - for (apic_id = 0; apic_id < nr_ioapics; apic_id++) { - for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) { - - idx = find_irq_entry(apic_id, pin, mp_INT); - if (idx == -1) { - if (!notcon) { - notcon = 1; - apic_printk(APIC_VERBOSE, - KERN_DEBUG " %d-%d", - mp_ioapics[apic_id].apicid, pin); - } else - apic_printk(APIC_VERBOSE, " %d-%d", - mp_ioapics[apic_id].apicid, pin); - continue; - } - if (notcon) { - apic_printk(APIC_VERBOSE, - " (apicid-pin) not connected\n"); - notcon = 0; - } +#ifdef CONFIG_ACPI + if (!acpi_disabled && acpi_ioapic) { + apic_id = mp_find_ioapic(0); + if (apic_id < 0) + apic_id = 0; + } +#endif - irq = pin_2_irq(idx, apic_id, pin); + for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) { + idx = find_irq_entry(apic_id, pin, mp_INT); + if (idx == -1) { + if (!notcon) { + notcon = 1; + apic_printk(APIC_VERBOSE, + KERN_DEBUG " %d-%d", + mp_ioapics[apic_id].apicid, pin); + } else + apic_printk(APIC_VERBOSE, " %d-%d", + mp_ioapics[apic_id].apicid, pin); + continue; + } + if (notcon) { + apic_printk(APIC_VERBOSE, + " (apicid-pin) not connected\n"); + notcon = 0; + } - /* - * Skip the timer IRQ if there's a quirk handler - * installed and if it returns 1: - */ - if (apic->multi_timer_check && - apic->multi_timer_check(apic_id, irq)) - continue; + irq = pin_2_irq(idx, apic_id, pin); - desc = irq_to_desc_alloc_cpu(irq, cpu); - if (!desc) { - printk(KERN_INFO "can not get irq_desc for %d\n", irq); - continue; - } - cfg = desc->chip_data; - add_pin_to_irq_cpu(cfg, cpu, apic_id, pin); + /* + * Skip the timer IRQ if there's a quirk handler + * installed and if it returns 1: + */ + if (apic->multi_timer_check && + apic->multi_timer_check(apic_id, irq)) + continue; - setup_IO_APIC_irq(apic_id, pin, irq, desc, - irq_trigger(idx), irq_polarity(idx)); + desc = irq_to_desc_alloc_node(irq, node); + if (!desc) { + printk(KERN_INFO "can not get irq_desc for %d\n", irq); + continue; } + cfg = desc->chip_data; + add_pin_to_irq_node(cfg, node, apic_id, pin); + /* + * don't mark it in pin_programmed, so later acpi could + * set it correctly when irq < 16 + */ + setup_IO_APIC_irq(apic_id, pin, irq, desc, + irq_trigger(idx), irq_polarity(idx)); } if (notcon) @@ -1869,7 +1733,7 @@ __apicdebuginit(void) print_APIC_bitfield(int base) __apicdebuginit(void) print_local_APIC(void *dummy) { - unsigned int v, ver, maxlvt; + unsigned int i, v, ver, maxlvt; u64 icr; if (apic_verbosity == APIC_QUIET) @@ -1957,6 +1821,18 @@ __apicdebuginit(void) print_local_APIC(void *dummy) printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v); v = apic_read(APIC_TDCR); printk(KERN_DEBUG "... APIC TDCR: %08x\n", v); + + if (boot_cpu_has(X86_FEATURE_EXTAPIC)) { + v = apic_read(APIC_EFEAT); + maxlvt = (v >> 16) & 0xff; + printk(KERN_DEBUG "... APIC EFEAT: %08x\n", v); + v = apic_read(APIC_ECTRL); + printk(KERN_DEBUG "... APIC ECTRL: %08x\n", v); + for (i = 0; i < maxlvt; i++) { + v = apic_read(APIC_EILVTn(i)); + printk(KERN_DEBUG "... APIC EILVT%d: %08x\n", i, v); + } + } printk("\n"); } @@ -2005,6 +1881,11 @@ __apicdebuginit(void) print_PIC(void) __apicdebuginit(int) print_all_ICs(void) { print_PIC(); + + /* don't print out if apic is not there */ + if (!cpu_has_apic || disable_apic) + return 0; + print_all_local_APICs(); print_IO_APIC(); @@ -2360,6 +2241,118 @@ static int ioapic_retrigger_irq(unsigned int irq) */ #ifdef CONFIG_SMP +static void send_cleanup_vector(struct irq_cfg *cfg) +{ + cpumask_var_t cleanup_mask; + + if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) { + unsigned int i; + cfg->move_cleanup_count = 0; + for_each_cpu_and(i, cfg->old_domain, cpu_online_mask) + cfg->move_cleanup_count++; + for_each_cpu_and(i, cfg->old_domain, cpu_online_mask) + apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR); + } else { + cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask); + cfg->move_cleanup_count = cpumask_weight(cleanup_mask); + apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); + free_cpumask_var(cleanup_mask); + } + cfg->move_in_progress = 0; +} + +static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg) +{ + int apic, pin; + struct irq_pin_list *entry; + u8 vector = cfg->vector; + + entry = cfg->irq_2_pin; + for (;;) { + unsigned int reg; + + if (!entry) + break; + + apic = entry->apic; + pin = entry->pin; + /* + * With interrupt-remapping, destination information comes + * from interrupt-remapping table entry. + */ + if (!irq_remapped(irq)) + io_apic_write(apic, 0x11 + pin*2, dest); + reg = io_apic_read(apic, 0x10 + pin*2); + reg &= ~IO_APIC_REDIR_VECTOR_MASK; + reg |= vector; + io_apic_modify(apic, 0x10 + pin*2, reg); + if (!entry->next) + break; + entry = entry->next; + } +} + +static int +assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask); + +/* + * Either sets desc->affinity to a valid value, and returns + * ->cpu_mask_to_apicid of that, or returns BAD_APICID and + * leaves desc->affinity untouched. + */ +static unsigned int +set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask) +{ + struct irq_cfg *cfg; + unsigned int irq; + + if (!cpumask_intersects(mask, cpu_online_mask)) + return BAD_APICID; + + irq = desc->irq; + cfg = desc->chip_data; + if (assign_irq_vector(irq, cfg, mask)) + return BAD_APICID; + + cpumask_copy(desc->affinity, mask); + + return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain); +} + +static int +set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask) +{ + struct irq_cfg *cfg; + unsigned long flags; + unsigned int dest; + unsigned int irq; + int ret = -1; + + irq = desc->irq; + cfg = desc->chip_data; + + spin_lock_irqsave(&ioapic_lock, flags); + dest = set_desc_affinity(desc, mask); + if (dest != BAD_APICID) { + /* Only the high 8 bits are valid. */ + dest = SET_APIC_LOGICAL_ID(dest); + __target_IO_APIC_irq(irq, dest, cfg); + ret = 0; + } + spin_unlock_irqrestore(&ioapic_lock, flags); + + return ret; +} + +static int +set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask) +{ + struct irq_desc *desc; + + desc = irq_to_desc(irq); + + return set_ioapic_affinity_irq_desc(desc, mask); +} #ifdef CONFIG_INTR_REMAP @@ -2374,26 +2367,25 @@ static int ioapic_retrigger_irq(unsigned int irq) * Real vector that is used for interrupting cpu will be coming from * the interrupt-remapping table entry. */ -static void +static int migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask) { struct irq_cfg *cfg; struct irte irte; unsigned int dest; unsigned int irq; + int ret = -1; if (!cpumask_intersects(mask, cpu_online_mask)) - return; + return ret; irq = desc->irq; if (get_irte(irq, &irte)) - return; + return ret; cfg = desc->chip_data; if (assign_irq_vector(irq, cfg, mask)) - return; - - set_extra_move_desc(desc, mask); + return ret; dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask); @@ -2409,27 +2401,30 @@ migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask) send_cleanup_vector(cfg); cpumask_copy(desc->affinity, mask); + + return 0; } /* * Migrates the IRQ destination in the process context. */ -static void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc, +static int set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask) { - migrate_ioapic_irq_desc(desc, mask); + return migrate_ioapic_irq_desc(desc, mask); } -static void set_ir_ioapic_affinity_irq(unsigned int irq, +static int set_ir_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask) { struct irq_desc *desc = irq_to_desc(irq); - set_ir_ioapic_affinity_irq_desc(desc, mask); + return set_ir_ioapic_affinity_irq_desc(desc, mask); } #else -static inline void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc, +static inline int set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask) { + return 0; } #endif @@ -2491,86 +2486,19 @@ static void irq_complete_move(struct irq_desc **descp) struct irq_cfg *cfg = desc->chip_data; unsigned vector, me; - if (likely(!cfg->move_in_progress)) { -#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC - if (likely(!cfg->move_desc_pending)) - return; - - /* domain has not changed, but affinity did */ - me = smp_processor_id(); - if (cpumask_test_cpu(me, desc->affinity)) { - *descp = desc = move_irq_desc(desc, me); - /* get the new one */ - cfg = desc->chip_data; - cfg->move_desc_pending = 0; - } -#endif + if (likely(!cfg->move_in_progress)) return; - } vector = ~get_irq_regs()->orig_ax; me = smp_processor_id(); - if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) { -#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC - *descp = desc = move_irq_desc(desc, me); - /* get the new one */ - cfg = desc->chip_data; -#endif + if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) send_cleanup_vector(cfg); - } } #else static inline void irq_complete_move(struct irq_desc **descp) {} #endif -static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) -{ - int apic, pin; - struct irq_pin_list *entry; - - entry = cfg->irq_2_pin; - for (;;) { - - if (!entry) - break; - - apic = entry->apic; - pin = entry->pin; - io_apic_eoi(apic, pin); - entry = entry->next; - } -} - -static void -eoi_ioapic_irq(struct irq_desc *desc) -{ - struct irq_cfg *cfg; - unsigned long flags; - unsigned int irq; - - irq = desc->irq; - cfg = desc->chip_data; - - spin_lock_irqsave(&ioapic_lock, flags); - __eoi_ioapic_irq(irq, cfg); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -#ifdef CONFIG_X86_X2APIC -static void ack_x2apic_level(unsigned int irq) -{ - struct irq_desc *desc = irq_to_desc(irq); - ack_x2APIC_irq(); - eoi_ioapic_irq(desc); -} - -static void ack_x2apic_edge(unsigned int irq) -{ - ack_x2APIC_irq(); -} -#endif - static void ack_apic_edge(unsigned int irq) { struct irq_desc *desc = irq_to_desc(irq); @@ -2634,9 +2562,6 @@ static void ack_apic_level(unsigned int irq) */ ack_APIC_irq(); - if (irq_remapped(irq)) - eoi_ioapic_irq(desc); - /* Now we can move and renable the irq */ if (unlikely(do_unmask_irq)) { /* Only migrate the irq if the ack has been received. @@ -2683,22 +2608,50 @@ static void ack_apic_level(unsigned int irq) } #ifdef CONFIG_INTR_REMAP +static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) +{ + int apic, pin; + struct irq_pin_list *entry; + + entry = cfg->irq_2_pin; + for (;;) { + + if (!entry) + break; + + apic = entry->apic; + pin = entry->pin; + io_apic_eoi(apic, pin); + entry = entry->next; + } +} + +static void +eoi_ioapic_irq(struct irq_desc *desc) +{ + struct irq_cfg *cfg; + unsigned long flags; + unsigned int irq; + + irq = desc->irq; + cfg = desc->chip_data; + + spin_lock_irqsave(&ioapic_lock, flags); + __eoi_ioapic_irq(irq, cfg); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + static void ir_ack_apic_edge(unsigned int irq) { -#ifdef CONFIG_X86_X2APIC - if (x2apic_enabled()) - return ack_x2apic_edge(irq); -#endif - return ack_apic_edge(irq); + ack_APIC_irq(); } static void ir_ack_apic_level(unsigned int irq) { -#ifdef CONFIG_X86_X2APIC - if (x2apic_enabled()) - return ack_x2apic_level(irq); -#endif - return ack_apic_level(irq); + struct irq_desc *desc = irq_to_desc(irq); + + ack_APIC_irq(); + eoi_ioapic_irq(desc); } #endif /* CONFIG_INTR_REMAP */ @@ -2903,7 +2856,7 @@ static inline void __init check_timer(void) { struct irq_desc *desc = irq_to_desc(0); struct irq_cfg *cfg = desc->chip_data; - int cpu = boot_cpu_id; + int node = cpu_to_node(boot_cpu_id); int apic1, pin1, apic2, pin2; unsigned long flags; int no_pin1 = 0; @@ -2969,7 +2922,7 @@ static inline void __init check_timer(void) * Ok, does IRQ0 through the IOAPIC work? */ if (no_pin1) { - add_pin_to_irq_cpu(cfg, cpu, apic1, pin1); + add_pin_to_irq_node(cfg, node, apic1, pin1); setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); } else { /* for edge trigger, setup_IO_APIC_irq already @@ -3006,7 +2959,7 @@ static inline void __init check_timer(void) /* * legacy devices should be connected to IO APIC #0 */ - replace_pin_at_irq_cpu(cfg, cpu, apic1, pin1, apic2, pin2); + replace_pin_at_irq_node(cfg, node, apic1, pin1, apic2, pin2); setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); enable_8259A_irq(0); if (timer_irq_works()) { @@ -3218,14 +3171,13 @@ static int nr_irqs_gsi = NR_IRQS_LEGACY; /* * Dynamic irq allocate and deallocation */ -unsigned int create_irq_nr(unsigned int irq_want) +unsigned int create_irq_nr(unsigned int irq_want, int node) { /* Allocate an unused irq */ unsigned int irq; unsigned int new; unsigned long flags; struct irq_cfg *cfg_new = NULL; - int cpu = boot_cpu_id; struct irq_desc *desc_new = NULL; irq = 0; @@ -3234,7 +3186,7 @@ unsigned int create_irq_nr(unsigned int irq_want) spin_lock_irqsave(&vector_lock, flags); for (new = irq_want; new < nr_irqs; new++) { - desc_new = irq_to_desc_alloc_cpu(new, cpu); + desc_new = irq_to_desc_alloc_node(new, node); if (!desc_new) { printk(KERN_INFO "can not get irq_desc for %d\n", new); continue; @@ -3243,6 +3195,9 @@ unsigned int create_irq_nr(unsigned int irq_want) if (cfg_new->vector != 0) continue; + + desc_new = move_irq_desc(desc_new, node); + if (__assign_irq_vector(new, cfg_new, apic->target_cpus()) == 0) irq = new; break; @@ -3260,11 +3215,12 @@ unsigned int create_irq_nr(unsigned int irq_want) int create_irq(void) { + int node = cpu_to_node(boot_cpu_id); unsigned int irq_want; int irq; irq_want = nr_irqs_gsi; - irq = create_irq_nr(irq_want); + irq = create_irq_nr(irq_want, node); if (irq == 0) irq = -1; @@ -3366,7 +3322,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms } #ifdef CONFIG_SMP -static void set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) +static int set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) { struct irq_desc *desc = irq_to_desc(irq); struct irq_cfg *cfg; @@ -3375,7 +3331,7 @@ static void set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) dest = set_desc_affinity(desc, mask); if (dest == BAD_APICID) - return; + return -1; cfg = desc->chip_data; @@ -3387,13 +3343,15 @@ static void set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) msg.address_lo |= MSI_ADDR_DEST_ID(dest); write_msi_msg_desc(desc, &msg); + + return 0; } #ifdef CONFIG_INTR_REMAP /* * Migrate the MSI irq to another cpumask. This migration is * done in the process context using interrupt-remapping hardware. */ -static void +static int ir_set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) { struct irq_desc *desc = irq_to_desc(irq); @@ -3402,11 +3360,11 @@ ir_set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) struct irte irte; if (get_irte(irq, &irte)) - return; + return -1; dest = set_desc_affinity(desc, mask); if (dest == BAD_APICID) - return; + return -1; irte.vector = cfg->vector; irte.dest_id = IRTE_DEST(dest); @@ -3423,6 +3381,8 @@ ir_set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask) */ if (cfg->move_in_progress) send_cleanup_vector(cfg); + + return 0; } #endif @@ -3518,15 +3478,17 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) unsigned int irq_want; struct intel_iommu *iommu = NULL; int index = 0; + int node; /* x86 doesn't support multiple MSI yet */ if (type == PCI_CAP_ID_MSI && nvec > 1) return 1; + node = dev_to_node(&dev->dev); irq_want = nr_irqs_gsi; sub_handle = 0; list_for_each_entry(msidesc, &dev->msi_list, list) { - irq = create_irq_nr(irq_want); + irq = create_irq_nr(irq_want, node); if (irq == 0) return -1; irq_want = irq + 1; @@ -3576,7 +3538,7 @@ void arch_teardown_msi_irq(unsigned int irq) #if defined (CONFIG_DMAR) || defined (CONFIG_INTR_REMAP) #ifdef CONFIG_SMP -static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) +static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) { struct irq_desc *desc = irq_to_desc(irq); struct irq_cfg *cfg; @@ -3585,7 +3547,7 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) dest = set_desc_affinity(desc, mask); if (dest == BAD_APICID) - return; + return -1; cfg = desc->chip_data; @@ -3597,6 +3559,8 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) msg.address_lo |= MSI_ADDR_DEST_ID(dest); dmar_msi_write(irq, &msg); + + return 0; } #endif /* CONFIG_SMP */ @@ -3630,7 +3594,7 @@ int arch_setup_dmar_msi(unsigned int irq) #ifdef CONFIG_HPET_TIMER #ifdef CONFIG_SMP -static void hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask) +static int hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask) { struct irq_desc *desc = irq_to_desc(irq); struct irq_cfg *cfg; @@ -3639,7 +3603,7 @@ static void hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask) dest = set_desc_affinity(desc, mask); if (dest == BAD_APICID) - return; + return -1; cfg = desc->chip_data; @@ -3651,6 +3615,8 @@ static void hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask) msg.address_lo |= MSI_ADDR_DEST_ID(dest); hpet_msi_write(irq, &msg); + + return 0; } #endif /* CONFIG_SMP */ @@ -3707,7 +3673,7 @@ static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector) write_ht_irq_msg(irq, &msg); } -static void set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask) +static int set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask) { struct irq_desc *desc = irq_to_desc(irq); struct irq_cfg *cfg; @@ -3715,11 +3681,13 @@ static void set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask) dest = set_desc_affinity(desc, mask); if (dest == BAD_APICID) - return; + return -1; cfg = desc->chip_data; target_ht_irq(irq, dest, cfg->vector); + + return 0; } #endif @@ -3794,6 +3762,8 @@ int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade, unsigned long flags; int err; + BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long)); + cfg = irq_cfg(irq); err = assign_irq_vector(irq, cfg, eligible_cpu); @@ -3807,15 +3777,13 @@ int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade, mmr_value = 0; entry = (struct uv_IO_APIC_route_entry *)&mmr_value; - BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long)); - - entry->vector = cfg->vector; - entry->delivery_mode = apic->irq_delivery_mode; - entry->dest_mode = apic->irq_dest_mode; - entry->polarity = 0; - entry->trigger = 0; - entry->mask = 0; - entry->dest = apic->cpu_mask_to_apicid(eligible_cpu); + entry->vector = cfg->vector; + entry->delivery_mode = apic->irq_delivery_mode; + entry->dest_mode = apic->irq_dest_mode; + entry->polarity = 0; + entry->trigger = 0; + entry->mask = 0; + entry->dest = apic->cpu_mask_to_apicid(eligible_cpu); mmr_pnode = uv_blade_to_pnode(mmr_blade); uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value); @@ -3833,10 +3801,10 @@ void arch_disable_uv_irq(int mmr_blade, unsigned long mmr_offset) struct uv_IO_APIC_route_entry *entry; int mmr_pnode; + BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long)); + mmr_value = 0; entry = (struct uv_IO_APIC_route_entry *)&mmr_value; - BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long)); - entry->mask = 1; mmr_pnode = uv_blade_to_pnode(mmr_blade); @@ -3900,6 +3868,71 @@ int __init arch_probe_nr_irqs(void) } #endif +static int __io_apic_set_pci_routing(struct device *dev, int irq, + struct io_apic_irq_attr *irq_attr) +{ + struct irq_desc *desc; + struct irq_cfg *cfg; + int node; + int ioapic, pin; + int trigger, polarity; + + ioapic = irq_attr->ioapic; + if (!IO_APIC_IRQ(irq)) { + apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", + ioapic); + return -EINVAL; + } + + if (dev) + node = dev_to_node(dev); + else + node = cpu_to_node(boot_cpu_id); + + desc = irq_to_desc_alloc_node(irq, node); + if (!desc) { + printk(KERN_INFO "can not get irq_desc %d\n", irq); + return 0; + } + + pin = irq_attr->ioapic_pin; + trigger = irq_attr->trigger; + polarity = irq_attr->polarity; + + /* + * IRQs < 16 are already in the irq_2_pin[] map + */ + if (irq >= NR_IRQS_LEGACY) { + cfg = desc->chip_data; + add_pin_to_irq_node(cfg, node, ioapic, pin); + } + + setup_IO_APIC_irq(ioapic, pin, irq, desc, trigger, polarity); + + return 0; +} + +int io_apic_set_pci_routing(struct device *dev, int irq, + struct io_apic_irq_attr *irq_attr) +{ + int ioapic, pin; + /* + * Avoid pin reprogramming. PRTs typically include entries + * with redundant pin->gsi mappings (but unique PCI devices); + * we only program the IOAPIC on the first. + */ + ioapic = irq_attr->ioapic; + pin = irq_attr->ioapic_pin; + if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) { + pr_debug("Pin %d-%d already programmed\n", + mp_ioapics[ioapic].apicid, pin); + return 0; + } + set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed); + + return __io_apic_set_pci_routing(dev, irq, irq_attr); +} + /* -------------------------------------------------------------------------- ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ @@ -3980,6 +4013,7 @@ int __init io_apic_get_unique_id(int ioapic, int apic_id) return apic_id; } +#endif int __init io_apic_get_version(int ioapic) { @@ -3992,39 +4026,6 @@ int __init io_apic_get_version(int ioapic) return reg_01.bits.version; } -#endif - -int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity) -{ - struct irq_desc *desc; - struct irq_cfg *cfg; - int cpu = boot_cpu_id; - - if (!IO_APIC_IRQ(irq)) { - apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", - ioapic); - return -EINVAL; - } - - desc = irq_to_desc_alloc_cpu(irq, cpu); - if (!desc) { - printk(KERN_INFO "can not get irq_desc %d\n", irq); - return 0; - } - - /* - * IRQs < 16 are already in the irq_2_pin[] map - */ - if (irq >= NR_IRQS_LEGACY) { - cfg = desc->chip_data; - add_pin_to_irq_cpu(cfg, cpu, ioapic, pin); - } - - setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity); - - return 0; -} - int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) { @@ -4055,51 +4056,44 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) #ifdef CONFIG_SMP void __init setup_ioapic_dest(void) { - int pin, ioapic, irq, irq_entry; + int pin, ioapic = 0, irq, irq_entry; struct irq_desc *desc; - struct irq_cfg *cfg; const struct cpumask *mask; if (skip_ioapic_setup == 1) return; - for (ioapic = 0; ioapic < nr_ioapics; ioapic++) { - for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { - irq_entry = find_irq_entry(ioapic, pin, mp_INT); - if (irq_entry == -1) - continue; - irq = pin_2_irq(irq_entry, ioapic, pin); - - /* setup_IO_APIC_irqs could fail to get vector for some device - * when you have too many devices, because at that time only boot - * cpu is online. - */ - desc = irq_to_desc(irq); - cfg = desc->chip_data; - if (!cfg->vector) { - setup_IO_APIC_irq(ioapic, pin, irq, desc, - irq_trigger(irq_entry), - irq_polarity(irq_entry)); - continue; +#ifdef CONFIG_ACPI + if (!acpi_disabled && acpi_ioapic) { + ioapic = mp_find_ioapic(0); + if (ioapic < 0) + ioapic = 0; + } +#endif - } + for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { + irq_entry = find_irq_entry(ioapic, pin, mp_INT); + if (irq_entry == -1) + continue; + irq = pin_2_irq(irq_entry, ioapic, pin); - /* - * Honour affinities which have been set in early boot - */ - if (desc->status & - (IRQ_NO_BALANCING | IRQ_AFFINITY_SET)) - mask = desc->affinity; - else - mask = apic->target_cpus(); + desc = irq_to_desc(irq); - if (intr_remapping_enabled) - set_ir_ioapic_affinity_irq_desc(desc, mask); - else - set_ioapic_affinity_irq_desc(desc, mask); - } + /* + * Honour affinities which have been set in early boot + */ + if (desc->status & + (IRQ_NO_BALANCING | IRQ_AFFINITY_SET)) + mask = desc->affinity; + else + mask = apic->target_cpus(); + if (intr_remapping_enabled) + set_ir_ioapic_affinity_irq_desc(desc, mask); + else + set_ioapic_affinity_irq_desc(desc, mask); } + } #endif diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c index ce4fbfa315a..a691302dc3f 100644 --- a/arch/x86/kernel/apic/nmi.c +++ b/arch/x86/kernel/apic/nmi.c @@ -104,7 +104,7 @@ static __init void nmi_cpu_busy(void *data) } #endif -static void report_broken_nmi(int cpu, int *prev_nmi_count) +static void report_broken_nmi(int cpu, unsigned int *prev_nmi_count) { printk(KERN_CONT "\n"); diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c index 01eda2ac65e..440a8bccd91 100644 --- a/arch/x86/kernel/apic/probe_32.c +++ b/arch/x86/kernel/apic/probe_32.c @@ -160,7 +160,6 @@ extern struct apic apic_summit; extern struct apic apic_bigsmp; extern struct apic apic_es7000; extern struct apic apic_es7000_cluster; -extern struct apic apic_default; struct apic *apic = &apic_default; EXPORT_SYMBOL_GPL(apic); diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c index 1783652bb0e..bc3e880f9b8 100644 --- a/arch/x86/kernel/apic/probe_64.c +++ b/arch/x86/kernel/apic/probe_64.c @@ -50,7 +50,7 @@ static struct apic *apic_probe[] __initdata = { void __init default_setup_apic_routing(void) { #ifdef CONFIG_X86_X2APIC - if (x2apic && (apic != &apic_x2apic_phys && + if (x2apic_mode && (apic != &apic_x2apic_phys && #ifdef CONFIG_X86_UV apic != &apic_x2apic_uv_x && #endif diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c index 9cfe1f415d8..344eee4ac0a 100644 --- a/arch/x86/kernel/apic/summit_32.c +++ b/arch/x86/kernel/apic/summit_32.c @@ -173,13 +173,6 @@ static inline int is_WPEG(struct rio_detail *rio){ rio->type == LookOutAWPEG || rio->type == LookOutBWPEG); } - -/* In clustered mode, the high nibble of APIC ID is a cluster number. - * The low nibble is a 4-bit bitmap. */ -#define XAPIC_DEST_CPUS_SHIFT 4 -#define XAPIC_DEST_CPUS_MASK ((1u << XAPIC_DEST_CPUS_SHIFT) - 1) -#define XAPIC_DEST_CLUSTER_MASK (XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT) - #define SUMMIT_APIC_DFR_VALUE (APIC_DFR_CLUSTER) static const struct cpumask *summit_target_cpus(void) diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c index 4a903e2f0d1..8e4cbb255c3 100644 --- a/arch/x86/kernel/apic/x2apic_cluster.c +++ b/arch/x86/kernel/apic/x2apic_cluster.c @@ -10,7 +10,7 @@ #include <asm/apic.h> #include <asm/ipi.h> -DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid); +static DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid); static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 2bda6935297..780a733a5e7 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -105,7 +105,7 @@ static void uv_vector_allocation_domain(int cpu, struct cpumask *retmask) cpumask_set_cpu(cpu, retmask); } -static int uv_wakeup_secondary(int phys_apicid, unsigned long start_rip) +static int __cpuinit uv_wakeup_secondary(int phys_apicid, unsigned long start_rip) { #ifdef CONFIG_SMP unsigned long val; @@ -583,15 +583,18 @@ void __init uv_system_init(void) bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades(); uv_blade_info = kmalloc(bytes, GFP_KERNEL); + BUG_ON(!uv_blade_info); get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size); bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes(); uv_node_to_blade = kmalloc(bytes, GFP_KERNEL); + BUG_ON(!uv_node_to_blade); memset(uv_node_to_blade, 255, bytes); bytes = sizeof(uv_cpu_to_blade[0]) * num_possible_cpus(); uv_cpu_to_blade = kmalloc(bytes, GFP_KERNEL); + BUG_ON(!uv_cpu_to_blade); memset(uv_cpu_to_blade, 255, bytes); blade = 0; diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c index 5a6aa1c1162..1a830cbd701 100644 --- a/arch/x86/kernel/asm-offsets_32.c +++ b/arch/x86/kernel/asm-offsets_32.c @@ -146,4 +146,5 @@ void foo(void) OFFSET(BP_loadflags, boot_params, hdr.loadflags); OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch); OFFSET(BP_version, boot_params, hdr.version); + OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment); } diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c index e72f062fb4b..898ecc47e12 100644 --- a/arch/x86/kernel/asm-offsets_64.c +++ b/arch/x86/kernel/asm-offsets_64.c @@ -125,6 +125,7 @@ int main(void) OFFSET(BP_loadflags, boot_params, hdr.loadflags); OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch); OFFSET(BP_version, boot_params, hdr.version); + OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment); BLANK(); DEFINE(PAGE_SIZE_asm, PAGE_SIZE); diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 7e4a459daa6..728b3750a3e 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -272,7 +272,7 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) int cpu = smp_processor_id(); int node; - unsigned apicid = hard_smp_processor_id(); + unsigned apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid; node = c->phys_proc_id; if (apicid_to_node[apicid] != NUMA_NO_NODE) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 77848d9fca6..b0517aa2bd3 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -299,7 +299,8 @@ static const char *__cpuinit table_lookup_model(struct cpuinfo_x86 *c) return NULL; /* Not found */ } -__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata; +__u32 cpu_caps_cleared[NCAPINTS] __cpuinitdata; +__u32 cpu_caps_set[NCAPINTS] __cpuinitdata; void load_percpu_segment(int cpu) { @@ -768,6 +769,12 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) if (this_cpu->c_identify) this_cpu->c_identify(c); + /* Clear/Set all flags overriden by options, after probe */ + for (i = 0; i < NCAPINTS; i++) { + c->x86_capability[i] &= ~cpu_caps_cleared[i]; + c->x86_capability[i] |= cpu_caps_set[i]; + } + #ifdef CONFIG_X86_64 c->apicid = apic->phys_pkg_id(c->initial_apicid, 0); #endif @@ -813,6 +820,16 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) #endif init_hypervisor(c); + + /* + * Clear/Set all flags overriden by options, need do it + * before following smp all cpus cap AND. + */ + for (i = 0; i < NCAPINTS; i++) { + c->x86_capability[i] &= ~cpu_caps_cleared[i]; + c->x86_capability[i] |= cpu_caps_set[i]; + } + /* * On SMP, boot_cpu_data holds the common feature set between * all CPUs; so make sure that we indicate which features are @@ -825,10 +842,6 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; } - /* Clear all flags overriden by options */ - for (i = 0; i < NCAPINTS; i++) - c->x86_capability[i] &= ~cleared_cpu_caps[i]; - #ifdef CONFIG_X86_MCE /* Init Machine Check Exception if available. */ mcheck_init(c); diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c index 86afe13fc31..6b2a52dd040 100644 --- a/arch/x86/kernel/cpu/cpu_debug.c +++ b/arch/x86/kernel/cpu/cpu_debug.c @@ -369,8 +369,20 @@ static void print_apic(void *arg) seq_printf(seq, " TMICT\t\t: %08x\n", apic_read(APIC_TMICT)); seq_printf(seq, " TMCCT\t\t: %08x\n", apic_read(APIC_TMCCT)); seq_printf(seq, " TDCR\t\t: %08x\n", apic_read(APIC_TDCR)); -#endif /* CONFIG_X86_LOCAL_APIC */ + if (boot_cpu_has(X86_FEATURE_EXTAPIC)) { + unsigned int i, v, maxeilvt; + + v = apic_read(APIC_EFEAT); + maxeilvt = (v >> 16) & 0xff; + seq_printf(seq, " EFEAT\t\t: %08x\n", v); + seq_printf(seq, " ECTRL\t\t: %08x\n", apic_read(APIC_ECTRL)); + for (i = 0; i < maxeilvt; i++) { + v = apic_read(APIC_EILVTn(i)); + seq_printf(seq, " EILVT%d\t\t: %08x\n", i, v); + } + } +#endif /* CONFIG_X86_LOCAL_APIC */ seq_printf(seq, "\n MSR\t:\n"); } diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig index 52c83987547..f138c6c389b 100644 --- a/arch/x86/kernel/cpu/cpufreq/Kconfig +++ b/arch/x86/kernel/cpu/cpufreq/Kconfig @@ -220,11 +220,14 @@ config X86_LONGHAUL If in doubt, say N. config X86_E_POWERSAVER - tristate "VIA C7 Enhanced PowerSaver" + tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)" select CPU_FREQ_TABLE - depends on X86_32 + depends on X86_32 && EXPERIMENTAL help - This adds the CPUFreq driver for VIA C7 processors. + This adds the CPUFreq driver for VIA C7 processors. However, this driver + does not have any safeguards to prevent operating the CPU out of spec + and is thus considered dangerous. Please use the regular ACPI cpufreq + driver, enabled by CONFIG_X86_ACPI_CPUFREQ. If in doubt, say N. diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 54b6de2cd94..ae9b503220c 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -90,11 +90,7 @@ static int check_est_cpu(unsigned int cpuid) { struct cpuinfo_x86 *cpu = &cpu_data(cpuid); - if (cpu->x86_vendor != X86_VENDOR_INTEL || - !cpu_has(cpu, X86_FEATURE_EST)) - return 0; - - return 1; + return cpu_has(cpu, X86_FEATURE_EST); } static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data) @@ -550,7 +546,7 @@ static int __init acpi_cpufreq_early_init(void) return -ENOMEM; } for_each_possible_cpu(i) { - if (!alloc_cpumask_var_node( + if (!zalloc_cpumask_var_node( &per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map, GFP_KERNEL, cpu_to_node(i))) { diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c index a8363e5be4e..d47c775eb0a 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c @@ -322,7 +322,7 @@ static int powernow_acpi_init(void) goto err0; } - if (!alloc_cpumask_var(&acpi_processor_perf->shared_cpu_map, + if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map, GFP_KERNEL)) { retval = -ENOMEM; goto err05; diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index f6b32d11235..cf52215d9eb 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -835,7 +835,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { struct cpufreq_frequency_table *powernow_table; int ret_val = -ENODEV; - acpi_integer space_id; + acpi_integer control, status; if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { dprintk("register performance failed: bad ACPI data\n"); @@ -848,12 +848,13 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) goto err_out; } - space_id = data->acpi_data.control_register.space_id; - if ((space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || - (space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { + control = data->acpi_data.control_register.space_id; + status = data->acpi_data.status_register.space_id; + + if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) || + (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) { dprintk("Invalid control/status registers (%x - %x)\n", - data->acpi_data.control_register.space_id, - space_id); + control, status); goto err_out; } @@ -886,7 +887,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) /* notify BIOS that we exist */ acpi_processor_notify_smm(THIS_MODULE); - if (!alloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) { + if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) { printk(KERN_ERR PFX "unable to alloc powernow_k8_data cpumask\n"); ret_val = -ENOMEM; diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c index c9f1fdc0283..55c831ed71c 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c @@ -471,7 +471,7 @@ static int centrino_target (struct cpufreq_policy *policy, if (unlikely(!alloc_cpumask_var(&saved_mask, GFP_KERNEL))) return -ENOMEM; - if (unlikely(!alloc_cpumask_var(&covered_cpus, GFP_KERNEL))) { + if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) { free_cpumask_var(saved_mask); return -ENOMEM; } diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 7437fa133c0..daed39ba261 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -229,12 +229,12 @@ static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c) } #endif -static void __cpuinit srat_detect_node(void) +static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) { #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) unsigned node; int cpu = smp_processor_id(); - int apicid = hard_smp_processor_id(); + int apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid; /* Don't do the funky fallback heuristics the AMD version employs for now. */ @@ -400,7 +400,7 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) } /* Work around errata */ - srat_detect_node(); + srat_detect_node(c); if (cpu_has(c, X86_FEATURE_VMX)) detect_vmx_virtcap(c); diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index 6fb0b359d2a..09dd1d414fc 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -1163,7 +1163,7 @@ static __init int mce_init_device(void) if (!mce_available(&boot_cpu_data)) return -EIO; - alloc_cpumask_var(&mce_device_initialized, GFP_KERNEL); + zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL); err = mce_init_banks(); if (err) diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c index cef3ee30744..65a0fceedcd 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c @@ -15,7 +15,6 @@ #include <asm/hw_irq.h> #include <asm/idle.h> #include <asm/therm_throt.h> -#include <asm/apic.h> asmlinkage void smp_thermal_interrupt(void) { diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c index ce0fe4b5c04..1d584a18a50 100644 --- a/arch/x86/kernel/cpu/mtrr/cleanup.c +++ b/arch/x86/kernel/cpu/mtrr/cleanup.c @@ -808,7 +808,7 @@ int __init mtrr_cleanup(unsigned address_bits) if (!is_cpu(INTEL) || enable_mtrr_cleanup < 1) return 0; - rdmsr(MTRRdefType_MSR, def, dummy); + rdmsr(MSR_MTRRdefType, def, dummy); def &= 0xff; if (def != MTRR_TYPE_UNCACHABLE) return 0; @@ -1003,7 +1003,7 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) */ if (!is_cpu(INTEL) || disable_mtrr_trim) return 0; - rdmsr(MTRRdefType_MSR, def, dummy); + rdmsr(MSR_MTRRdefType, def, dummy); def &= 0xff; if (def != MTRR_TYPE_UNCACHABLE) return 0; diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index d21d4fb161f..0543f69f0b2 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -20,9 +20,9 @@ struct fixed_range_block { }; static struct fixed_range_block fixed_range_blocks[] = { - { MTRRfix64K_00000_MSR, 1 }, /* one 64k MTRR */ - { MTRRfix16K_80000_MSR, 2 }, /* two 16k MTRRs */ - { MTRRfix4K_C0000_MSR, 8 }, /* eight 4k MTRRs */ + { MSR_MTRRfix64K_00000, 1 }, /* one 64k MTRR */ + { MSR_MTRRfix16K_80000, 2 }, /* two 16k MTRRs */ + { MSR_MTRRfix4K_C0000, 8 }, /* eight 4k MTRRs */ {} }; @@ -194,12 +194,12 @@ get_fixed_ranges(mtrr_type * frs) k8_check_syscfg_dram_mod_en(); - rdmsr(MTRRfix64K_00000_MSR, p[0], p[1]); + rdmsr(MSR_MTRRfix64K_00000, p[0], p[1]); for (i = 0; i < 2; i++) - rdmsr(MTRRfix16K_80000_MSR + i, p[2 + i * 2], p[3 + i * 2]); + rdmsr(MSR_MTRRfix16K_80000 + i, p[2 + i * 2], p[3 + i * 2]); for (i = 0; i < 8; i++) - rdmsr(MTRRfix4K_C0000_MSR + i, p[6 + i * 2], p[7 + i * 2]); + rdmsr(MSR_MTRRfix4K_C0000 + i, p[6 + i * 2], p[7 + i * 2]); } void mtrr_save_fixed_ranges(void *info) @@ -310,7 +310,7 @@ void __init get_mtrr_state(void) vrs = mtrr_state.var_ranges; - rdmsr(MTRRcap_MSR, lo, dummy); + rdmsr(MSR_MTRRcap, lo, dummy); mtrr_state.have_fixed = (lo >> 8) & 1; for (i = 0; i < num_var_ranges; i++) @@ -318,7 +318,7 @@ void __init get_mtrr_state(void) if (mtrr_state.have_fixed) get_fixed_ranges(mtrr_state.fixed_ranges); - rdmsr(MTRRdefType_MSR, lo, dummy); + rdmsr(MSR_MTRRdefType, lo, dummy); mtrr_state.def_type = (lo & 0xff); mtrr_state.enabled = (lo & 0xc00) >> 10; @@ -583,10 +583,10 @@ static void prepare_set(void) __acquires(set_atomicity_lock) __flush_tlb(); /* Save MTRR state */ - rdmsr(MTRRdefType_MSR, deftype_lo, deftype_hi); + rdmsr(MSR_MTRRdefType, deftype_lo, deftype_hi); /* Disable MTRRs, and set the default type to uncached */ - mtrr_wrmsr(MTRRdefType_MSR, deftype_lo & ~0xcff, deftype_hi); + mtrr_wrmsr(MSR_MTRRdefType, deftype_lo & ~0xcff, deftype_hi); } static void post_set(void) __releases(set_atomicity_lock) @@ -595,7 +595,7 @@ static void post_set(void) __releases(set_atomicity_lock) __flush_tlb(); /* Intel (P6) standard MTRRs */ - mtrr_wrmsr(MTRRdefType_MSR, deftype_lo, deftype_hi); + mtrr_wrmsr(MSR_MTRRdefType, deftype_lo, deftype_hi); /* Enable caches */ write_cr0(read_cr0() & 0xbfffffff); @@ -707,7 +707,7 @@ int generic_validate_add_page(unsigned long base, unsigned long size, unsigned i static int generic_have_wrcomb(void) { unsigned long config, dummy; - rdmsr(MTRRcap_MSR, config, dummy); + rdmsr(MSR_MTRRcap, config, dummy); return (config & (1 << 10)); } diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 03cda01f57c..8fc248b5aea 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -104,7 +104,7 @@ static void __init set_num_var_ranges(void) unsigned long config = 0, dummy; if (use_intel()) { - rdmsr(MTRRcap_MSR, config, dummy); + rdmsr(MSR_MTRRcap, config, dummy); } else if (is_cpu(AMD)) config = 2; else if (is_cpu(CYRIX) || is_cpu(CENTAUR)) diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h index 77f67f7b347..7538b767f20 100644 --- a/arch/x86/kernel/cpu/mtrr/mtrr.h +++ b/arch/x86/kernel/cpu/mtrr/mtrr.h @@ -5,21 +5,6 @@ #include <linux/types.h> #include <linux/stddef.h> -#define MTRRcap_MSR 0x0fe -#define MTRRdefType_MSR 0x2ff - -#define MTRRfix64K_00000_MSR 0x250 -#define MTRRfix16K_80000_MSR 0x258 -#define MTRRfix16K_A0000_MSR 0x259 -#define MTRRfix4K_C0000_MSR 0x268 -#define MTRRfix4K_C8000_MSR 0x269 -#define MTRRfix4K_D0000_MSR 0x26a -#define MTRRfix4K_D8000_MSR 0x26b -#define MTRRfix4K_E0000_MSR 0x26c -#define MTRRfix4K_E8000_MSR 0x26d -#define MTRRfix4K_F0000_MSR 0x26e -#define MTRRfix4K_F8000_MSR 0x26f - #define MTRR_CHANGE_MASK_FIXED 0x01 #define MTRR_CHANGE_MASK_VARIABLE 0x02 #define MTRR_CHANGE_MASK_DEFTYPE 0x04 diff --git a/arch/x86/kernel/cpu/mtrr/state.c b/arch/x86/kernel/cpu/mtrr/state.c index 7f7e2753685..1f5fb1588d1 100644 --- a/arch/x86/kernel/cpu/mtrr/state.c +++ b/arch/x86/kernel/cpu/mtrr/state.c @@ -35,7 +35,7 @@ void set_mtrr_prepare_save(struct set_mtrr_context *ctxt) if (use_intel()) /* Save MTRR state */ - rdmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi); + rdmsr(MSR_MTRRdefType, ctxt->deftype_lo, ctxt->deftype_hi); else /* Cyrix ARRs - everything else were excluded at the top */ ctxt->ccr3 = getCx86(CX86_CCR3); @@ -46,7 +46,7 @@ void set_mtrr_cache_disable(struct set_mtrr_context *ctxt) { if (use_intel()) /* Disable MTRRs, and set the default type to uncached */ - mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo & 0xf300UL, + mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo & 0xf300UL, ctxt->deftype_hi); else if (is_cpu(CYRIX)) /* Cyrix ARRs - everything else were excluded at the top */ @@ -64,7 +64,7 @@ void set_mtrr_done(struct set_mtrr_context *ctxt) /* Restore MTRRdefType */ if (use_intel()) /* Intel (P6) standard MTRRs */ - mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi); + mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo, ctxt->deftype_hi); else /* Cyrix ARRs - everything else was excluded at the top */ setCx86(CX86_CCR3, ctxt->ccr3); diff --git a/arch/x86/kernel/dumpstack.h b/arch/x86/kernel/dumpstack.h index da87590b869..81086c227ab 100644 --- a/arch/x86/kernel/dumpstack.h +++ b/arch/x86/kernel/dumpstack.h @@ -29,7 +29,6 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, unsigned long *sp, unsigned long bp, char *log_lvl); extern unsigned int code_bytes; -extern int kstack_depth_to_print; /* The form of the top of the frame on the stack */ struct stack_frame { diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 76b8cd953de..ebdb85cf268 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -97,6 +97,7 @@ static void __init nvidia_bugs(int num, int slot, int func) } #if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC) +#if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC) static u32 __init ati_ixp4x0_rev(int num, int slot, int func) { u32 d; @@ -114,6 +115,7 @@ static u32 __init ati_ixp4x0_rev(int num, int slot, int func) d &= 0xff; return d; } +#endif static void __init ati_bugs(int num, int slot, int func) { diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 30683883e0c..dc5ed4bdd88 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -608,13 +608,6 @@ ignore_int: ENTRY(initial_code) .long i386_start_kernel -.section .text -/* - * Real beginning of normal "text" segment - */ -ENTRY(stext) -ENTRY(_stext) - /* * BSS section */ diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index c3fe010d74c..9a391bbb8ba 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -12,6 +12,7 @@ #include <asm/io_apic.h> #include <asm/irq.h> #include <asm/idle.h> +#include <asm/hw_irq.h> atomic_t irq_err_count; @@ -24,9 +25,9 @@ void (*generic_interrupt_extension)(void) = NULL; */ void ack_bad_irq(unsigned int irq) { - printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq); + if (printk_ratelimit()) + pr_err("unexpected IRQ trap at vector %02x\n", irq); -#ifdef CONFIG_X86_LOCAL_APIC /* * Currently unexpected vectors happen only on SMP and APIC. * We _must_ ack these because every local APIC has only N @@ -36,9 +37,7 @@ void ack_bad_irq(unsigned int irq) * completely. * But only ack when the APIC is enabled -AK */ - if (cpu_has_apic) - ack_APIC_irq(); -#endif + ack_APIC_irq(); } #define irq_stats(x) (&per_cpu(irq_stat, x)) @@ -178,7 +177,7 @@ u64 arch_irq_stat_cpu(unsigned int cpu) sum += irq_stats(cpu)->irq_thermal_count; # ifdef CONFIG_X86_64 sum += irq_stats(cpu)->irq_threshold_count; -#endif +# endif #endif return sum; } @@ -213,14 +212,11 @@ unsigned int __irq_entry do_IRQ(struct pt_regs *regs) irq = __get_cpu_var(vector_irq)[vector]; if (!handle_irq(irq, regs)) { -#ifdef CONFIG_X86_64 - if (!disable_apic) - ack_APIC_irq(); -#endif + ack_APIC_irq(); if (printk_ratelimit()) - printk(KERN_EMERG "%s: %d.%d No irq handler for vector (irq %d)\n", - __func__, smp_processor_id(), vector, irq); + pr_emerg("%s: %d.%d No irq handler for vector (irq %d)\n", + __func__, smp_processor_id(), vector, irq); } irq_exit(); diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit.c index 368b0a8836f..2e08b10ad51 100644 --- a/arch/x86/kernel/irqinit_32.c +++ b/arch/x86/kernel/irqinit.c @@ -1,20 +1,25 @@ +#include <linux/linkage.h> #include <linux/errno.h> #include <linux/signal.h> #include <linux/sched.h> #include <linux/ioport.h> #include <linux/interrupt.h> +#include <linux/timex.h> #include <linux/slab.h> #include <linux/random.h> +#include <linux/kprobes.h> #include <linux/init.h> #include <linux/kernel_stat.h> #include <linux/sysdev.h> #include <linux/bitops.h> +#include <linux/acpi.h> #include <linux/io.h> #include <linux/delay.h> #include <asm/atomic.h> #include <asm/system.h> #include <asm/timer.h> +#include <asm/hw_irq.h> #include <asm/pgtable.h> #include <asm/desc.h> #include <asm/apic.h> @@ -22,7 +27,23 @@ #include <asm/i8259.h> #include <asm/traps.h> +/* + * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: + * (these are usually mapped to vectors 0x30-0x3f) + */ + +/* + * The IO-APIC gives us many more interrupt sources. Most of these + * are unused but an SMP system is supposed to have enough memory ... + * sometimes (mostly wrt. hw bugs) we get corrupted vectors all + * across the spectrum, so we really want to be prepared to get all + * of these. Plus, more powerful systems might have more than 64 + * IO-APIC registers. + * + * (these are usually mapped into the 0x30-0xff vector range) + */ +#ifdef CONFIG_X86_32 /* * Note that on a 486, we don't want to do a SIGFPE on an irq13 * as the irq is unreliable, and exception 16 works correctly @@ -52,30 +73,7 @@ static struct irqaction fpu_irq = { .handler = math_error_irq, .name = "fpu", }; - -void __init init_ISA_irqs(void) -{ - int i; - -#ifdef CONFIG_X86_LOCAL_APIC - init_bsp_APIC(); #endif - init_8259A(0); - - /* - * 16 old-style INTA-cycle interrupts: - */ - for (i = 0; i < NR_IRQS_LEGACY; i++) { - struct irq_desc *desc = irq_to_desc(i); - - desc->status = IRQ_DISABLED; - desc->action = NULL; - desc->depth = 1; - - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } -} /* * IRQ2 is cascade interrupt to second interrupt controller @@ -118,29 +116,37 @@ int vector_used_by_percpu_irq(unsigned int vector) return 0; } -/* Overridden in paravirt.c */ -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) +static void __init init_ISA_irqs(void) { int i; - /* Execute any quirks before the call gates are initialised: */ - x86_quirk_pre_intr_init(); +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) + init_bsp_APIC(); +#endif + init_8259A(0); /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) + * 16 old-style INTA-cycle interrupts: */ - for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { - /* SYSCALL_VECTOR was reserved in trap_init. */ - if (i != SYSCALL_VECTOR) - set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); + for (i = 0; i < NR_IRQS_LEGACY; i++) { + struct irq_desc *desc = irq_to_desc(i); + + desc->status = IRQ_DISABLED; + desc->action = NULL; + desc->depth = 1; + + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); } +} +/* Overridden in paravirt.c */ +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); -#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP) +static void __init smp_intr_init(void) +{ +#ifdef CONFIG_SMP +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) /* * The reschedule interrupt is a CPU-to-CPU reschedule-helper * IPI, driven by wakeup. @@ -160,16 +166,27 @@ void __init native_init_IRQ(void) /* IPI for generic function call */ alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - /* IPI for single call function */ + /* IPI for generic single function call */ alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, - call_function_single_interrupt); + call_function_single_interrupt); /* Low priority IPI to cleanup after moving an irq */ set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors); #endif +#endif /* CONFIG_SMP */ +} + +static void __init apic_intr_init(void) +{ + smp_intr_init(); + +#ifdef CONFIG_X86_64 + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); +#endif -#ifdef CONFIG_X86_LOCAL_APIC +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) /* self generated IPI for local APIC timer */ alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); @@ -179,16 +196,67 @@ void __init native_init_IRQ(void) /* IPI vectors for APIC spurious and error interrupts */ alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + + /* Performance monitoring interrupts: */ +# ifdef CONFIG_PERF_COUNTERS + alloc_intr_gate(LOCAL_PERF_VECTOR, perf_counter_interrupt); + alloc_intr_gate(LOCAL_PENDING_VECTOR, perf_pending_interrupt); +# endif + #endif +#ifdef CONFIG_X86_32 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL) /* thermal monitor LVT interrupt */ alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); #endif +#endif +} + +/** + * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors + * + * Description: + * Perform any necessary interrupt initialisation prior to setting up + * the "ordinary" interrupt call gates. For legacy reasons, the ISA + * interrupts should be initialised here if the machine emulates a PC + * in any way. + **/ +static void __init x86_quirk_pre_intr_init(void) +{ +#ifdef CONFIG_X86_32 + if (x86_quirks->arch_pre_intr_init) { + if (x86_quirks->arch_pre_intr_init()) + return; + } +#endif + init_ISA_irqs(); +} + +void __init native_init_IRQ(void) +{ + int i; + + /* Execute any quirks before the call gates are initialised: */ + x86_quirk_pre_intr_init(); + + apic_intr_init(); + + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { + /* IA32_SYSCALL_VECTOR could be used in trap_init already. */ + if (!test_bit(i, used_vectors)) + set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); + } if (!acpi_ioapic) setup_irq(2, &irq2); +#ifdef CONFIG_X86_32 /* * Call quirks after call gates are initialised (usually add in * the architecture specific gates): @@ -203,4 +271,5 @@ void __init native_init_IRQ(void) setup_irq(FPU_IRQ, &fpu_irq); irq_ctx_init(smp_processor_id()); +#endif } diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c deleted file mode 100644 index 8cd10537fd4..00000000000 --- a/arch/x86/kernel/irqinit_64.c +++ /dev/null @@ -1,177 +0,0 @@ -#include <linux/linkage.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/sysdev.h> -#include <linux/bitops.h> -#include <linux/acpi.h> -#include <linux/io.h> -#include <linux/delay.h> - -#include <asm/atomic.h> -#include <asm/system.h> -#include <asm/hw_irq.h> -#include <asm/pgtable.h> -#include <asm/desc.h> -#include <asm/apic.h> -#include <asm/i8259.h> - -/* - * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: - * (these are usually mapped to vectors 0x30-0x3f) - */ - -/* - * The IO-APIC gives us many more interrupt sources. Most of these - * are unused but an SMP system is supposed to have enough memory ... - * sometimes (mostly wrt. hw bugs) we get corrupted vectors all - * across the spectrum, so we really want to be prepared to get all - * of these. Plus, more powerful systems might have more than 64 - * IO-APIC registers. - * - * (these are usually mapped into the 0x30-0xff vector range) - */ - -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ - -static struct irqaction irq2 = { - .handler = no_action, - .name = "cascade", -}; -DEFINE_PER_CPU(vector_irq_t, vector_irq) = { - [0 ... IRQ0_VECTOR - 1] = -1, - [IRQ0_VECTOR] = 0, - [IRQ1_VECTOR] = 1, - [IRQ2_VECTOR] = 2, - [IRQ3_VECTOR] = 3, - [IRQ4_VECTOR] = 4, - [IRQ5_VECTOR] = 5, - [IRQ6_VECTOR] = 6, - [IRQ7_VECTOR] = 7, - [IRQ8_VECTOR] = 8, - [IRQ9_VECTOR] = 9, - [IRQ10_VECTOR] = 10, - [IRQ11_VECTOR] = 11, - [IRQ12_VECTOR] = 12, - [IRQ13_VECTOR] = 13, - [IRQ14_VECTOR] = 14, - [IRQ15_VECTOR] = 15, - [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 -}; - -int vector_used_by_percpu_irq(unsigned int vector) -{ - int cpu; - - for_each_online_cpu(cpu) { - if (per_cpu(vector_irq, cpu)[vector] != -1) - return 1; - } - - return 0; -} - -static void __init init_ISA_irqs(void) -{ - int i; - - init_bsp_APIC(); - init_8259A(0); - - for (i = 0; i < NR_IRQS_LEGACY; i++) { - struct irq_desc *desc = irq_to_desc(i); - - desc->status = IRQ_DISABLED; - desc->action = NULL; - desc->depth = 1; - - /* - * 16 old-style INTA-cycle interrupts: - */ - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } -} - -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -static void __init smp_intr_init(void) -{ -#ifdef CONFIG_SMP - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPIs for invalidation */ - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); - - /* IPI for generic function call */ - alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* IPI for generic single function call */ - alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, - call_function_single_interrupt); - - /* Low priority IPI to cleanup after moving an irq */ - set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); - set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors); -#endif -} - -static void __init apic_intr_init(void) -{ - smp_intr_init(); - - alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); - alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); - - /* self generated IPI for local APIC timer */ - alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* generic IPI for platform specific use */ - alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); -} - -void __init native_init_IRQ(void) -{ - int i; - - init_ISA_irqs(); - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (vector != IA32_SYSCALL_VECTOR) - set_intr_gate(vector, interrupt[i]); - } - - apic_intr_init(); - - if (!acpi_ioapic) - setup_irq(2, &irq2); -} diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index b1f4dffb919..8d82a77a3f3 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -142,7 +142,7 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) gdb_regs32[GDB_PS] = *(unsigned long *)(p->thread.sp + 8); gdb_regs32[GDB_CS] = __KERNEL_CS; gdb_regs32[GDB_SS] = __KERNEL_DS; - gdb_regs[GDB_PC] = p->thread.ip; + gdb_regs[GDB_PC] = 0; gdb_regs[GDB_R8] = 0; gdb_regs[GDB_R9] = 0; gdb_regs[GDB_R10] = 0; diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 70fd7e414c1..651c93b2886 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -17,6 +17,7 @@ #include <linux/acpi.h> #include <linux/module.h> #include <linux/smp.h> +#include <linux/pci.h> #include <asm/mtrr.h> #include <asm/mpspec.h> @@ -870,24 +871,17 @@ static inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {} #endif /* CONFIG_X86_IO_APIC */ -static int check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, - int count) +static int +check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count) { - if (!mpc_new_phys) { - pr_info("No spare slots, try to append...take your risk, " - "new mpc_length %x\n", count); - } else { - if (count <= mpc_new_length) - pr_info("No spare slots, try to append..., " - "new mpc_length %x\n", count); - else { - pr_err("mpc_new_length %lx is too small\n", - mpc_new_length); - return -1; - } + int ret = 0; + + if (!mpc_new_phys || count <= mpc_new_length) { + WARN(1, "update_mptable: No spare slots (length: %x)\n", count); + return -1; } - return 0; + return ret; } static int __init replace_intsrc_all(struct mpc_table *mpc, @@ -946,7 +940,7 @@ static int __init replace_intsrc_all(struct mpc_table *mpc, } else { struct mpc_intsrc *m = (struct mpc_intsrc *)mpt; count += sizeof(struct mpc_intsrc); - if (!check_slot(mpc_new_phys, mpc_new_length, count)) + if (check_slot(mpc_new_phys, mpc_new_length, count) < 0) goto out; assign_to_mpc_intsrc(&mp_irqs[i], m); mpc->length = count; @@ -963,11 +957,14 @@ out: return 0; } -static int __initdata enable_update_mptable; +int enable_update_mptable; static int __init update_mptable_setup(char *str) { enable_update_mptable = 1; +#ifdef CONFIG_PCI + pci_routeirq = 1; +#endif return 0; } early_param("update_mptable", update_mptable_setup); @@ -980,6 +977,9 @@ static int __initdata alloc_mptable; static int __init parse_alloc_mptable_opt(char *p) { enable_update_mptable = 1; +#ifdef CONFIG_PCI + pci_routeirq = 1; +#endif alloc_mptable = 1; if (!p) return 0; diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index ca989158e84..3e21e38d7e3 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -11,6 +11,7 @@ #include <trace/power.h> #include <asm/system.h> #include <asm/apic.h> +#include <asm/syscalls.h> #include <asm/idle.h> #include <asm/uaccess.h> #include <asm/i387.h> diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index b4158439bf6..7791eef95b9 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -214,8 +214,8 @@ unsigned long mmu_cr4_features; unsigned long mmu_cr4_features = X86_CR4_PAE; #endif -/* Boot loader ID as an integer, for the benefit of proc_dointvec */ -int bootloader_type; +/* Boot loader ID and version as integers, for the benefit of proc_dointvec */ +int bootloader_type, bootloader_version; /* * Setup options @@ -706,6 +706,12 @@ void __init setup_arch(char **cmdline_p) #endif saved_video_mode = boot_params.hdr.vid_mode; bootloader_type = boot_params.hdr.type_of_loader; + if ((bootloader_type >> 4) == 0xe) { + bootloader_type &= 0xf; + bootloader_type |= (boot_params.hdr.ext_loader_type+0x10) << 4; + } + bootloader_version = bootloader_type & 0xf; + bootloader_version |= boot_params.hdr.ext_loader_ver << 4; #ifdef CONFIG_BLK_DEV_RAM rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK; @@ -997,24 +1003,6 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_X86_32 /** - * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors - * - * Description: - * Perform any necessary interrupt initialisation prior to setting up - * the "ordinary" interrupt call gates. For legacy reasons, the ISA - * interrupts should be initialised here if the machine emulates a PC - * in any way. - **/ -void __init x86_quirk_pre_intr_init(void) -{ - if (x86_quirks->arch_pre_intr_init) { - if (x86_quirks->arch_pre_intr_init()) - return; - } - init_ISA_irqs(); -} - -/** * x86_quirk_intr_init - post gate setup interrupt initialisation * * Description: diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c index 13f33ea8cca..f6db48c405b 100644 --- a/arch/x86/kernel/smp.c +++ b/arch/x86/kernel/smp.c @@ -193,19 +193,19 @@ void smp_call_function_single_interrupt(struct pt_regs *regs) } struct smp_ops smp_ops = { - .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu, - .smp_prepare_cpus = native_smp_prepare_cpus, - .smp_cpus_done = native_smp_cpus_done, + .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu, + .smp_prepare_cpus = native_smp_prepare_cpus, + .smp_cpus_done = native_smp_cpus_done, - .smp_send_stop = native_smp_send_stop, - .smp_send_reschedule = native_smp_send_reschedule, + .smp_send_stop = native_smp_send_stop, + .smp_send_reschedule = native_smp_send_reschedule, - .cpu_up = native_cpu_up, - .cpu_die = native_cpu_die, - .cpu_disable = native_cpu_disable, - .play_dead = native_play_dead, + .cpu_up = native_cpu_up, + .cpu_die = native_cpu_die, + .cpu_disable = native_cpu_disable, + .play_dead = native_play_dead, - .send_call_func_ipi = native_send_call_func_ipi, + .send_call_func_ipi = native_send_call_func_ipi, .send_call_func_single_ipi = native_send_call_func_single_ipi, }; EXPORT_SYMBOL_GPL(smp_ops); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 58d24ef917d..7c80007ea5f 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -504,7 +504,7 @@ void __inquire_remote_apic(int apicid) * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this * won't ... remember to clear down the APIC, etc later. */ -int __devinit +int __cpuinit wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip) { unsigned long send_status, accept_status = 0; @@ -538,7 +538,7 @@ wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip) return (send_status | accept_status); } -int __devinit +static int __cpuinit wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip) { unsigned long send_status, accept_status = 0; @@ -822,10 +822,12 @@ do_rest: /* mark "stuck" area as not stuck */ *((volatile unsigned long *)trampoline_base) = 0; - /* - * Cleanup possible dangling ends... - */ - smpboot_restore_warm_reset_vector(); + if (get_uv_system_type() != UV_NON_UNIQUE_APIC) { + /* + * Cleanup possible dangling ends... + */ + smpboot_restore_warm_reset_vector(); + } return boot_error; } @@ -990,10 +992,12 @@ static int __init smp_sanity_check(unsigned max_cpus) */ if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) && !cpu_has_apic) { - printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", - boot_cpu_physical_apicid); - printk(KERN_ERR "... forcing use of dummy APIC emulation." + if (!disable_apic) { + pr_err("BIOS bug, local APIC #%d not detected!...\n", + boot_cpu_physical_apicid); + pr_err("... forcing use of dummy APIC emulation." "(tell your hw vendor)\n"); + } smpboot_clear_io_apic(); arch_disable_smp_support(); return -1; diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index ed0c33761e6..8c7b03b0cfc 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -832,7 +832,7 @@ static int __init uv_bau_init(void) return 0; for_each_possible_cpu(cur_cpu) - alloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu), + zalloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu), GFP_KERNEL, cpu_to_node(cur_cpu)); uv_bau_retry_limit = 1; diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index a1d288327ff..2310700faca 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -969,11 +969,8 @@ void __init trap_init(void) for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++) set_bit(i, used_vectors); -#ifdef CONFIG_X86_64 set_bit(IA32_SYSCALL_VECTOR, used_vectors); -#else - set_bit(SYSCALL_VECTOR, used_vectors); -#endif + /* * Should be a barrier for any external CPU state: */ diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index d57de05dc43..84d27356c3d 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -384,13 +384,13 @@ unsigned long native_calibrate_tsc(void) { u64 tsc1, tsc2, delta, ref1, ref2; unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX; - unsigned long flags, latch, ms, fast_calibrate, tsc_khz; + unsigned long flags, latch, ms, fast_calibrate, hv_tsc_khz; int hpet = is_hpet_enabled(), i, loopmin; - tsc_khz = get_hypervisor_tsc_freq(); - if (tsc_khz) { + hv_tsc_khz = get_hypervisor_tsc_freq(); + if (hv_tsc_khz) { printk(KERN_INFO "TSC: Frequency read from the hypervisor\n"); - return tsc_khz; + return hv_tsc_khz; } local_irq_save(flags); diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c index bf36328f6ef..027b5b49899 100644 --- a/arch/x86/kernel/tsc_sync.c +++ b/arch/x86/kernel/tsc_sync.c @@ -34,6 +34,7 @@ static __cpuinitdata atomic_t stop_count; * of a critical section, to be able to prove TSC time-warps: */ static __cpuinitdata raw_spinlock_t sync_lock = __RAW_SPIN_LOCK_UNLOCKED; + static __cpuinitdata cycles_t last_tsc; static __cpuinitdata cycles_t max_warp; static __cpuinitdata int nr_warps; @@ -113,13 +114,12 @@ void __cpuinit check_tsc_sync_source(int cpu) return; if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE)) { - printk(KERN_INFO - "Skipping synchronization checks as TSC is reliable.\n"); + pr_info("Skipping synchronization checks as TSC is reliable.\n"); return; } - printk(KERN_INFO "checking TSC synchronization [CPU#%d -> CPU#%d]:", - smp_processor_id(), cpu); + pr_info("checking TSC synchronization [CPU#%d -> CPU#%d]:", + smp_processor_id(), cpu); /* * Reset it - in case this is a second bootup: @@ -143,8 +143,8 @@ void __cpuinit check_tsc_sync_source(int cpu) if (nr_warps) { printk("\n"); - printk(KERN_WARNING "Measured %Ld cycles TSC warp between CPUs," - " turning off TSC clock.\n", max_warp); + pr_warning("Measured %Ld cycles TSC warp between CPUs, " + "turning off TSC clock.\n", max_warp); mark_tsc_unstable("check_tsc_sync_source failed"); } else { printk(" passed.\n"); @@ -195,5 +195,3 @@ void __cpuinit check_tsc_sync_target(void) while (atomic_read(&stop_count) != cpus) cpu_relax(); } -#undef NR_LOOPS - diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c index d7ac84e7fc1..b8035a0f404 100644 --- a/arch/x86/kernel/vm86_32.c +++ b/arch/x86/kernel/vm86_32.c @@ -318,9 +318,9 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk } /* - * Save old state, set default return value (%ax) to 0 + * Save old state, set default return value (%ax) to 0 (VM86_SIGNAL) */ - info->regs32->ax = 0; + info->regs32->ax = VM86_SIGNAL; tsk->thread.saved_sp0 = tsk->thread.sp0; tsk->thread.saved_fs = info->regs32->fs; tsk->thread.saved_gs = get_user_gs(info->regs32); diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 849ee611f01..4c85b2e2bb6 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -1,5 +1,431 @@ +/* + * ld script for the x86 kernel + * + * Historic 32-bit version written by Martin Mares <mj@atrey.karlin.mff.cuni.cz> + * + * Modernisation, unification and other changes and fixes: + * Copyright (C) 2007-2009 Sam Ravnborg <sam@ravnborg.org> + * + * + * Don't define absolute symbols until and unless you know that symbol + * value is should remain constant even if kernel image is relocated + * at run time. Absolute symbols are not relocated. If symbol value should + * change if kernel is relocated, make the symbol section relative and + * put it inside the section definition. + */ + #ifdef CONFIG_X86_32 -# include "vmlinux_32.lds.S" +#define LOAD_OFFSET __PAGE_OFFSET #else -# include "vmlinux_64.lds.S" +#define LOAD_OFFSET __START_KERNEL_map #endif + +#include <asm-generic/vmlinux.lds.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/page_types.h> +#include <asm/cache.h> +#include <asm/boot.h> + +#undef i386 /* in case the preprocessor is a 32bit one */ + +OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT) + +#ifdef CONFIG_X86_32 +OUTPUT_ARCH(i386) +ENTRY(phys_startup_32) +jiffies = jiffies_64; +#else +OUTPUT_ARCH(i386:x86-64) +ENTRY(phys_startup_64) +jiffies_64 = jiffies; +#endif + +PHDRS { + text PT_LOAD FLAGS(5); /* R_E */ + data PT_LOAD FLAGS(7); /* RWE */ +#ifdef CONFIG_X86_64 + user PT_LOAD FLAGS(7); /* RWE */ + data.init PT_LOAD FLAGS(7); /* RWE */ +#ifdef CONFIG_SMP + percpu PT_LOAD FLAGS(7); /* RWE */ +#endif + data.init2 PT_LOAD FLAGS(7); /* RWE */ +#endif + note PT_NOTE FLAGS(0); /* ___ */ +} + +SECTIONS +{ +#ifdef CONFIG_X86_32 + . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR; + phys_startup_32 = startup_32 - LOAD_OFFSET; +#else + . = __START_KERNEL; + phys_startup_64 = startup_64 - LOAD_OFFSET; +#endif + + /* Text and read-only data */ + + /* bootstrapping code */ + .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) { + _text = .; + *(.text.head) + } :text = 0x9090 + + /* The rest of the text */ + .text : AT(ADDR(.text) - LOAD_OFFSET) { +#ifdef CONFIG_X86_32 + /* not really needed, already page aligned */ + . = ALIGN(PAGE_SIZE); + *(.text.page_aligned) +#endif + . = ALIGN(8); + _stext = .; + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + IRQENTRY_TEXT + *(.fixup) + *(.gnu.warning) + /* End of text section */ + _etext = .; + } :text = 0x9090 + + NOTES :text :note + + /* Exception table */ + . = ALIGN(16); + __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { + __start___ex_table = .; + *(__ex_table) + __stop___ex_table = .; + } :text = 0x9090 + + RODATA + + /* Data */ + . = ALIGN(PAGE_SIZE); + .data : AT(ADDR(.data) - LOAD_OFFSET) { + DATA_DATA + CONSTRUCTORS + +#ifdef CONFIG_X86_64 + /* End of data section */ + _edata = .; +#endif + } :data + +#ifdef CONFIG_X86_32 + /* 32 bit has nosave before _edata */ + . = ALIGN(PAGE_SIZE); + .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { + __nosave_begin = .; + *(.data.nosave) + . = ALIGN(PAGE_SIZE); + __nosave_end = .; + } +#endif + + . = ALIGN(PAGE_SIZE); + .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { + *(.data.page_aligned) + *(.data.idt) + } + +#ifdef CONFIG_X86_32 + . = ALIGN(32); +#else + . = ALIGN(PAGE_SIZE); + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); +#endif + .data.cacheline_aligned : + AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { + *(.data.cacheline_aligned) + } + + /* rarely changed data like cpu maps */ +#ifdef CONFIG_X86_32 + . = ALIGN(32); +#else + . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES); +#endif + .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { + *(.data.read_mostly) + +#ifdef CONFIG_X86_32 + /* End of data section */ + _edata = .; +#endif + } + +#ifdef CONFIG_X86_64 + +#define VSYSCALL_ADDR (-10*1024*1024) +#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \ + SIZEOF(.data.read_mostly) + 4095) & ~(4095)) +#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \ + SIZEOF(.data.read_mostly) + 4095) & ~(4095)) + +#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR) +#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET) + +#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR) +#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET) + + . = VSYSCALL_ADDR; + .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { + *(.vsyscall_0) + } :user + + __vsyscall_0 = VSYSCALL_VIRT_ADDR; + + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); + .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) { + *(.vsyscall_fn) + } + + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); + .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) { + *(.vsyscall_gtod_data) + } + + vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data); + .vsyscall_clock : AT(VLOAD(.vsyscall_clock)) { + *(.vsyscall_clock) + } + vsyscall_clock = VVIRT(.vsyscall_clock); + + + .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) { + *(.vsyscall_1) + } + .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) { + *(.vsyscall_2) + } + + .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { + *(.vgetcpu_mode) + } + vgetcpu_mode = VVIRT(.vgetcpu_mode); + + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); + .jiffies : AT(VLOAD(.jiffies)) { + *(.jiffies) + } + jiffies = VVIRT(.jiffies); + + .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) { + *(.vsyscall_3) + } + + . = VSYSCALL_VIRT_ADDR + PAGE_SIZE; + +#undef VSYSCALL_ADDR +#undef VSYSCALL_PHYS_ADDR +#undef VSYSCALL_VIRT_ADDR +#undef VLOAD_OFFSET +#undef VLOAD +#undef VVIRT_OFFSET +#undef VVIRT + +#endif /* CONFIG_X86_64 */ + + /* init_task */ + . = ALIGN(THREAD_SIZE); + .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { + *(.data.init_task) + } +#ifdef CONFIG_X86_64 + :data.init +#endif + + /* + * smp_locks might be freed after init + * start/end must be page aligned + */ + . = ALIGN(PAGE_SIZE); + .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { + __smp_locks = .; + *(.smp_locks) + __smp_locks_end = .; + . = ALIGN(PAGE_SIZE); + } + + /* Init code and data - will be freed after init */ + . = ALIGN(PAGE_SIZE); + .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { + __init_begin = .; /* paired with __init_end */ + _sinittext = .; + INIT_TEXT + _einittext = .; + } + + .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { + INIT_DATA + } + + . = ALIGN(16); + .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { + __setup_start = .; + *(.init.setup) + __setup_end = .; + } + .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { + __initcall_start = .; + INITCALLS + __initcall_end = .; + } + + .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { + __con_initcall_start = .; + *(.con_initcall.init) + __con_initcall_end = .; + } + + .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { + __x86_cpu_dev_start = .; + *(.x86_cpu_dev.init) + __x86_cpu_dev_end = .; + } + + SECURITY_INIT + + . = ALIGN(8); + .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) { + __parainstructions = .; + *(.parainstructions) + __parainstructions_end = .; + } + + . = ALIGN(8); + .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { + __alt_instructions = .; + *(.altinstructions) + __alt_instructions_end = .; + } + + .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) { + *(.altinstr_replacement) + } + + /* + * .exit.text is discard at runtime, not link time, to deal with + * references from .altinstructions and .eh_frame + */ + .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { + EXIT_TEXT + } + + .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { + EXIT_DATA + } + +#ifdef CONFIG_BLK_DEV_INITRD + . = ALIGN(PAGE_SIZE); + .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { + __initramfs_start = .; + *(.init.ramfs) + __initramfs_end = .; + } +#endif + +#if defined(CONFIG_X86_64) && defined(CONFIG_SMP) + /* + * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the + * output PHDR, so the next output section - __data_nosave - should + * start another section data.init2. Also, pda should be at the head of + * percpu area. Preallocate it and define the percpu offset symbol + * so that it can be accessed as a percpu variable. + */ + . = ALIGN(PAGE_SIZE); + PERCPU_VADDR(0, :percpu) +#else + PERCPU(PAGE_SIZE) +#endif + + . = ALIGN(PAGE_SIZE); + + /* freed after init ends here */ + .init.end : AT(ADDR(.init.end) - LOAD_OFFSET) { + __init_end = .; + } + +#ifdef CONFIG_X86_64 + .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { + . = ALIGN(PAGE_SIZE); + __nosave_begin = .; + *(.data.nosave) + . = ALIGN(PAGE_SIZE); + __nosave_end = .; + } :data.init2 + /* use another section data.init2, see PERCPU_VADDR() above */ +#endif + + /* BSS */ + . = ALIGN(PAGE_SIZE); + .bss : AT(ADDR(.bss) - LOAD_OFFSET) { + __bss_start = .; + *(.bss.page_aligned) + *(.bss) + . = ALIGN(4); + __bss_stop = .; + } + + . = ALIGN(PAGE_SIZE); + .brk : AT(ADDR(.brk) - LOAD_OFFSET) { + __brk_base = .; + . += 64 * 1024; /* 64k alignment slop space */ + *(.brk_reservation) /* areas brk users have reserved */ + __brk_limit = .; + } + + .end : AT(ADDR(.end) - LOAD_OFFSET) { + _end = .; + } + + /* Sections to be discarded */ + /DISCARD/ : { + *(.exitcall.exit) + *(.eh_frame) + *(.discard) + } + + STABS_DEBUG + DWARF_DEBUG +} + + +#ifdef CONFIG_X86_32 +ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE), + "kernel image bigger than KERNEL_IMAGE_SIZE") +#else +/* + * Per-cpu symbols which need to be offset from __per_cpu_load + * for the boot processor. + */ +#define INIT_PER_CPU(x) init_per_cpu__##x = per_cpu__##x + __per_cpu_load +INIT_PER_CPU(gdt_page); +INIT_PER_CPU(irq_stack_union); + +/* + * Build-time check on the image size: + */ +ASSERT((_end - _text <= KERNEL_IMAGE_SIZE), + "kernel image bigger than KERNEL_IMAGE_SIZE") + +#ifdef CONFIG_SMP +ASSERT((per_cpu__irq_stack_union == 0), + "irq_stack_union is not at start of per-cpu area"); +#endif + +#endif /* CONFIG_X86_32 */ + +#ifdef CONFIG_KEXEC +#include <asm/kexec.h> + +ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE, + "kexec control code size is too big") +#endif + diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S deleted file mode 100644 index 62ad500d55f..00000000000 --- a/arch/x86/kernel/vmlinux_32.lds.S +++ /dev/null @@ -1,229 +0,0 @@ -/* ld script to make i386 Linux kernel - * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>; - * - * Don't define absolute symbols until and unless you know that symbol - * value is should remain constant even if kernel image is relocated - * at run time. Absolute symbols are not relocated. If symbol value should - * change if kernel is relocated, make the symbol section relative and - * put it inside the section definition. - */ - -#define LOAD_OFFSET __PAGE_OFFSET - -#include <asm-generic/vmlinux.lds.h> -#include <asm/thread_info.h> -#include <asm/page_types.h> -#include <asm/cache.h> -#include <asm/boot.h> - -OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") -OUTPUT_ARCH(i386) -ENTRY(phys_startup_32) -jiffies = jiffies_64; - -PHDRS { - text PT_LOAD FLAGS(5); /* R_E */ - data PT_LOAD FLAGS(7); /* RWE */ - note PT_NOTE FLAGS(0); /* ___ */ -} -SECTIONS -{ - . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR; - phys_startup_32 = startup_32 - LOAD_OFFSET; - - .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) { - _text = .; /* Text and read-only data */ - *(.text.head) - } :text = 0x9090 - - /* read-only */ - .text : AT(ADDR(.text) - LOAD_OFFSET) { - . = ALIGN(PAGE_SIZE); /* not really needed, already page aligned */ - *(.text.page_aligned) - TEXT_TEXT - SCHED_TEXT - LOCK_TEXT - KPROBES_TEXT - IRQENTRY_TEXT - *(.fixup) - *(.gnu.warning) - _etext = .; /* End of text section */ - } :text = 0x9090 - - NOTES :text :note - - . = ALIGN(16); /* Exception table */ - __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { - __start___ex_table = .; - *(__ex_table) - __stop___ex_table = .; - } :text = 0x9090 - - RODATA - - /* writeable */ - . = ALIGN(PAGE_SIZE); - .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */ - DATA_DATA - CONSTRUCTORS - } :data - - . = ALIGN(PAGE_SIZE); - .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { - __nosave_begin = .; - *(.data.nosave) - . = ALIGN(PAGE_SIZE); - __nosave_end = .; - } - - . = ALIGN(PAGE_SIZE); - .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { - *(.data.page_aligned) - *(.data.idt) - } - - . = ALIGN(32); - .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { - *(.data.cacheline_aligned) - } - - /* rarely changed data like cpu maps */ - . = ALIGN(32); - .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { - *(.data.read_mostly) - _edata = .; /* End of data section */ - } - - . = ALIGN(THREAD_SIZE); /* init_task */ - .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { - *(.data.init_task) - } - - /* might get freed after init */ - . = ALIGN(PAGE_SIZE); - .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { - __smp_locks = .; - *(.smp_locks) - __smp_locks_end = .; - } - /* will be freed after init - * Following ALIGN() is required to make sure no other data falls on the - * same page where __smp_alt_end is pointing as that page might be freed - * after boot. Always make sure that ALIGN() directive is present after - * the section which contains __smp_alt_end. - */ - . = ALIGN(PAGE_SIZE); - - /* will be freed after init */ - . = ALIGN(PAGE_SIZE); /* Init code and data */ - .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { - __init_begin = .; - _sinittext = .; - INIT_TEXT - _einittext = .; - } - .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { - INIT_DATA - } - . = ALIGN(16); - .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { - __setup_start = .; - *(.init.setup) - __setup_end = .; - } - .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { - __initcall_start = .; - INITCALLS - __initcall_end = .; - } - .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - } - .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { - __x86_cpu_dev_start = .; - *(.x86_cpu_dev.init) - __x86_cpu_dev_end = .; - } - SECURITY_INIT - . = ALIGN(4); - .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { - __alt_instructions = .; - *(.altinstructions) - __alt_instructions_end = .; - } - .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) { - *(.altinstr_replacement) - } - . = ALIGN(4); - .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) { - __parainstructions = .; - *(.parainstructions) - __parainstructions_end = .; - } - /* .exit.text is discard at runtime, not link time, to deal with references - from .altinstructions and .eh_frame */ - .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { - EXIT_TEXT - } - .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { - EXIT_DATA - } -#if defined(CONFIG_BLK_DEV_INITRD) - . = ALIGN(PAGE_SIZE); - .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - } -#endif - PERCPU(PAGE_SIZE) - . = ALIGN(PAGE_SIZE); - /* freed after init ends here */ - - .bss : AT(ADDR(.bss) - LOAD_OFFSET) { - __init_end = .; - __bss_start = .; /* BSS */ - *(.bss.page_aligned) - *(.bss) - . = ALIGN(4); - __bss_stop = .; - } - - .brk : AT(ADDR(.brk) - LOAD_OFFSET) { - . = ALIGN(PAGE_SIZE); - __brk_base = . ; - . += 64 * 1024 ; /* 64k alignment slop space */ - *(.brk_reservation) /* areas brk users have reserved */ - __brk_limit = . ; - } - - .end : AT(ADDR(.end) - LOAD_OFFSET) { - _end = . ; - } - - /* Sections to be discarded */ - /DISCARD/ : { - *(.exitcall.exit) - *(.discard) - } - - STABS_DEBUG - - DWARF_DEBUG -} - -/* - * Build-time check on the image size: - */ -ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE), - "kernel image bigger than KERNEL_IMAGE_SIZE") - -#ifdef CONFIG_KEXEC -/* Link time checks */ -#include <asm/kexec.h> - -ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE, - "kexec control code size is too big") -#endif diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S deleted file mode 100644 index c8742507b03..00000000000 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ /dev/null @@ -1,298 +0,0 @@ -/* ld script to make x86-64 Linux kernel - * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>; - */ - -#define LOAD_OFFSET __START_KERNEL_map - -#include <asm-generic/vmlinux.lds.h> -#include <asm/asm-offsets.h> -#include <asm/page_types.h> - -#undef i386 /* in case the preprocessor is a 32bit one */ - -OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64") -OUTPUT_ARCH(i386:x86-64) -ENTRY(phys_startup_64) -jiffies_64 = jiffies; -PHDRS { - text PT_LOAD FLAGS(5); /* R_E */ - data PT_LOAD FLAGS(7); /* RWE */ - user PT_LOAD FLAGS(7); /* RWE */ - data.init PT_LOAD FLAGS(7); /* RWE */ -#ifdef CONFIG_SMP - percpu PT_LOAD FLAGS(7); /* RWE */ -#endif - data.init2 PT_LOAD FLAGS(7); /* RWE */ - note PT_NOTE FLAGS(0); /* ___ */ -} -SECTIONS -{ - . = __START_KERNEL; - phys_startup_64 = startup_64 - LOAD_OFFSET; - .text : AT(ADDR(.text) - LOAD_OFFSET) { - _text = .; /* Text and read-only data */ - /* First the code that has to be first for bootstrapping */ - *(.text.head) - _stext = .; - /* Then the rest */ - TEXT_TEXT - SCHED_TEXT - LOCK_TEXT - KPROBES_TEXT - IRQENTRY_TEXT - *(.fixup) - *(.gnu.warning) - _etext = .; /* End of text section */ - } :text = 0x9090 - - NOTES :text :note - - . = ALIGN(16); /* Exception table */ - __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { - __start___ex_table = .; - *(__ex_table) - __stop___ex_table = .; - } :text = 0x9090 - - RODATA - - . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */ - /* Data */ - .data : AT(ADDR(.data) - LOAD_OFFSET) { - DATA_DATA - CONSTRUCTORS - _edata = .; /* End of data section */ - } :data - - - .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { - . = ALIGN(PAGE_SIZE); - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - *(.data.cacheline_aligned) - } - . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES); - .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { - *(.data.read_mostly) - } - -#define VSYSCALL_ADDR (-10*1024*1024) -#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095)) -#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095)) - -#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR) -#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET) - -#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR) -#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET) - - . = VSYSCALL_ADDR; - .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) } :user - __vsyscall_0 = VSYSCALL_VIRT_ADDR; - - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) { *(.vsyscall_fn) } - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) - { *(.vsyscall_gtod_data) } - vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data); - .vsyscall_clock : AT(VLOAD(.vsyscall_clock)) - { *(.vsyscall_clock) } - vsyscall_clock = VVIRT(.vsyscall_clock); - - - .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) - { *(.vsyscall_1) } - .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) - { *(.vsyscall_2) } - - .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) } - vgetcpu_mode = VVIRT(.vgetcpu_mode); - - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - .jiffies : AT(VLOAD(.jiffies)) { *(.jiffies) } - jiffies = VVIRT(.jiffies); - - .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) - { *(.vsyscall_3) } - - . = VSYSCALL_VIRT_ADDR + PAGE_SIZE; - -#undef VSYSCALL_ADDR -#undef VSYSCALL_PHYS_ADDR -#undef VSYSCALL_VIRT_ADDR -#undef VLOAD_OFFSET -#undef VLOAD -#undef VVIRT_OFFSET -#undef VVIRT - - .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { - . = ALIGN(THREAD_SIZE); /* init_task */ - *(.data.init_task) - }:data.init - - .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { - . = ALIGN(PAGE_SIZE); - *(.data.page_aligned) - } - - .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { - /* might get freed after init */ - . = ALIGN(PAGE_SIZE); - __smp_alt_begin = .; - __smp_locks = .; - *(.smp_locks) - __smp_locks_end = .; - . = ALIGN(PAGE_SIZE); - __smp_alt_end = .; - } - - . = ALIGN(PAGE_SIZE); /* Init code and data */ - __init_begin = .; /* paired with __init_end */ - .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { - _sinittext = .; - INIT_TEXT - _einittext = .; - } - .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { - __initdata_begin = .; - INIT_DATA - __initdata_end = .; - } - - .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { - . = ALIGN(16); - __setup_start = .; - *(.init.setup) - __setup_end = .; - } - .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { - __initcall_start = .; - INITCALLS - __initcall_end = .; - } - .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - } - .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { - __x86_cpu_dev_start = .; - *(.x86_cpu_dev.init) - __x86_cpu_dev_end = .; - } - SECURITY_INIT - - . = ALIGN(8); - .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) { - __parainstructions = .; - *(.parainstructions) - __parainstructions_end = .; - } - - .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { - . = ALIGN(8); - __alt_instructions = .; - *(.altinstructions) - __alt_instructions_end = .; - } - .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) { - *(.altinstr_replacement) - } - /* .exit.text is discard at runtime, not link time, to deal with references - from .altinstructions and .eh_frame */ - .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { - EXIT_TEXT - } - .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { - EXIT_DATA - } - -#ifdef CONFIG_BLK_DEV_INITRD - . = ALIGN(PAGE_SIZE); - .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - } -#endif - -#ifdef CONFIG_SMP - /* - * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the - * output PHDR, so the next output section - __data_nosave - should - * start another section data.init2. Also, pda should be at the head of - * percpu area. Preallocate it and define the percpu offset symbol - * so that it can be accessed as a percpu variable. - */ - . = ALIGN(PAGE_SIZE); - PERCPU_VADDR(0, :percpu) -#else - PERCPU(PAGE_SIZE) -#endif - - . = ALIGN(PAGE_SIZE); - __init_end = .; - - .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { - . = ALIGN(PAGE_SIZE); - __nosave_begin = .; - *(.data.nosave) - . = ALIGN(PAGE_SIZE); - __nosave_end = .; - } :data.init2 /* use another section data.init2, see PERCPU_VADDR() above */ - - .bss : AT(ADDR(.bss) - LOAD_OFFSET) { - . = ALIGN(PAGE_SIZE); - __bss_start = .; /* BSS */ - *(.bss.page_aligned) - *(.bss) - __bss_stop = .; - } - - .brk : AT(ADDR(.brk) - LOAD_OFFSET) { - . = ALIGN(PAGE_SIZE); - __brk_base = . ; - . += 64 * 1024 ; /* 64k alignment slop space */ - *(.brk_reservation) /* areas brk users have reserved */ - __brk_limit = . ; - } - - _end = . ; - - /* Sections to be discarded */ - /DISCARD/ : { - *(.exitcall.exit) - *(.eh_frame) - *(.discard) - } - - STABS_DEBUG - - DWARF_DEBUG -} - - /* - * Per-cpu symbols which need to be offset from __per_cpu_load - * for the boot processor. - */ -#define INIT_PER_CPU(x) init_per_cpu__##x = per_cpu__##x + __per_cpu_load -INIT_PER_CPU(gdt_page); -INIT_PER_CPU(irq_stack_union); - -/* - * Build-time check on the image size: - */ -ASSERT((_end - _text <= KERNEL_IMAGE_SIZE), - "kernel image bigger than KERNEL_IMAGE_SIZE") - -#ifdef CONFIG_SMP -ASSERT((per_cpu__irq_stack_union == 0), - "irq_stack_union is not at start of per-cpu area"); -#endif - -#ifdef CONFIG_KEXEC -#include <asm/kexec.h> - -ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE, - "kexec control code size is too big") -#endif diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 33a93b41739..ef4205c1a7a 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -637,7 +637,7 @@ static void __init lguest_init_IRQ(void) void lguest_setup_irq(unsigned int irq) { - irq_to_desc_alloc_cpu(irq, 0); + irq_to_desc_alloc_node(irq, 0); set_irq_chip_and_handler_name(irq, &lguest_irq_controller, handle_level_irq, "level"); } diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index ae4f7b5d710..4b98df0973b 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -1,3 +1,4 @@ +#include <linux/initrd.h> #include <linux/ioport.h> #include <linux/swap.h> diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index fecbce6e7d7..0696d506c4a 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -889,6 +889,9 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) return 0; } + if (io_apic_assign_pci_irqs) + return 0; + /* Find IRQ routing entry */ if (!pirq_table) @@ -1039,56 +1042,15 @@ static void __init pcibios_fixup_irqs(void) pirq_penalty[dev->irq]++; } + if (io_apic_assign_pci_irqs) + return; + dev = NULL; while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); if (!pin) continue; -#ifdef CONFIG_X86_IO_APIC - /* - * Recalculate IRQ numbers if we use the I/O APIC. - */ - if (io_apic_assign_pci_irqs) { - int irq; - - /* - * interrupt pins are numbered starting from 1 - */ - irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, - PCI_SLOT(dev->devfn), pin - 1); - /* - * Busses behind bridges are typically not listed in the - * MP-table. In this case we have to look up the IRQ - * based on the parent bus, parent slot, and pin number. - * The SMP code detects such bridged busses itself so we - * should get into this branch reliably. - */ - if (irq < 0 && dev->bus->parent) { - /* go back to the bridge */ - struct pci_dev *bridge = dev->bus->self; - int bus; - - pin = pci_swizzle_interrupt_pin(dev, pin); - bus = bridge->bus->number; - irq = IO_APIC_get_PCI_irq_vector(bus, - PCI_SLOT(bridge->devfn), pin - 1); - if (irq >= 0) - dev_warn(&dev->dev, - "using bridge %s INT %c to " - "get IRQ %d\n", - pci_name(bridge), - 'A' + pin - 1, irq); - } - if (irq >= 0) { - dev_info(&dev->dev, - "PCI->APIC IRQ transform: INT %c " - "-> IRQ %d\n", - 'A' + pin - 1, irq); - dev->irq = irq; - } - } -#endif /* * Still no IRQ? Try to lookup one... */ @@ -1183,6 +1145,19 @@ int __init pcibios_irq_init(void) pcibios_enable_irq = pirq_enable_irq; pcibios_fixup_irqs(); + + if (io_apic_assign_pci_irqs && pci_routeirq) { + struct pci_dev *dev = NULL; + /* + * PCI IRQ routing is set up by pci_enable_device(), but we + * also do it here in case there are still broken drivers that + * don't use pci_enable_device(). + */ + printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n"); + for_each_pci_dev(dev) + pirq_enable_irq(dev); + } + return 0; } @@ -1213,16 +1188,23 @@ void pcibios_penalize_isa_irq(int irq, int active) static int pirq_enable_irq(struct pci_dev *dev) { u8 pin; - struct pci_dev *temp_dev; pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); - if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) { + if (pin && !pcibios_lookup_irq(dev, 1)) { char *msg = ""; + if (!io_apic_assign_pci_irqs && dev->irq) + return 0; + if (io_apic_assign_pci_irqs) { +#ifdef CONFIG_X86_IO_APIC + struct pci_dev *temp_dev; int irq; + struct io_apic_irq_attr irq_attr; - irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin - 1); + irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, + PCI_SLOT(dev->devfn), + pin - 1, &irq_attr); /* * Busses behind bridges are typically not listed in the MP-table. * In this case we have to look up the IRQ based on the parent bus, @@ -1235,7 +1217,8 @@ static int pirq_enable_irq(struct pci_dev *dev) pin = pci_swizzle_interrupt_pin(dev, pin); irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, - PCI_SLOT(bridge->devfn), pin - 1); + PCI_SLOT(bridge->devfn), + pin - 1, &irq_attr); if (irq >= 0) dev_warn(&dev->dev, "using bridge %s " "INT %c to get IRQ %d\n", @@ -1245,12 +1228,15 @@ static int pirq_enable_irq(struct pci_dev *dev) } dev = temp_dev; if (irq >= 0) { + io_apic_set_pci_routing(&dev->dev, irq, + &irq_attr); + dev->irq = irq; dev_info(&dev->dev, "PCI->APIC IRQ transform: " "INT %c -> IRQ %d\n", 'A' + pin - 1, irq); - dev->irq = irq; return 0; } else msg = "; probably buggy MP table"; +#endif } else if (pci_probe & PCI_BIOS_IRQ_SCAN) msg = ""; else diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 5fa10bb9604..8766b0e216c 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -375,7 +375,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res, if (!fixmem32) return AE_OK; if ((mcfg_res->start >= fixmem32->address) && - (mcfg_res->end <= (fixmem32->address + + (mcfg_res->end < (fixmem32->address + fixmem32->address_length))) { mcfg_res->flags = 1; return AE_CTRL_TERMINATE; @@ -392,7 +392,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res, return AE_OK; if ((mcfg_res->start >= address.minimum) && - (mcfg_res->end <= (address.minimum + address.address_length))) { + (mcfg_res->end < (address.minimum + address.address_length))) { mcfg_res->flags = 1; return AE_CTRL_TERMINATE; } @@ -418,7 +418,7 @@ static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used) struct resource mcfg_res; mcfg_res.start = start; - mcfg_res.end = end; + mcfg_res.end = end - 1; mcfg_res.flags = 0; acpi_get_devices("PNP0C01", find_mboard_resource, &mcfg_res, NULL); diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c index 7133cdf9098..cac083386e0 100644 --- a/arch/x86/vdso/vma.c +++ b/arch/x86/vdso/vma.c @@ -8,6 +8,7 @@ #include <linux/sched.h> #include <linux/init.h> #include <linux/random.h> +#include <linux/elf.h> #include <asm/vsyscall.h> #include <asm/vgtod.h> #include <asm/proto.h> |