aboutsummaryrefslogtreecommitdiff
path: root/arch/x86_64/kernel/apic.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86_64/kernel/apic.c')
-rw-r--r--arch/x86_64/kernel/apic.c229
1 files changed, 111 insertions, 118 deletions
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c
index 2b8cef037a6..135ff25e6b4 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86_64/kernel/apic.c
@@ -25,6 +25,7 @@
#include <linux/kernel_stat.h>
#include <linux/sysdev.h>
#include <linux/module.h>
+#include <linux/ioport.h>
#include <asm/atomic.h>
#include <asm/smp.h>
@@ -36,13 +37,20 @@
#include <asm/idle.h>
#include <asm/proto.h>
#include <asm/timex.h>
+#include <asm/apic.h>
+int apic_mapped;
int apic_verbosity;
int apic_runs_main_timer;
int apic_calibrate_pmtmr __initdata;
int disable_apic_timer __initdata;
+static struct resource lapic_resource = {
+ .name = "Local APIC",
+ .flags = IORESOURCE_MEM | IORESOURCE_BUSY,
+};
+
/*
* cpu_mask that denotes the CPUs that needs timer interrupt coming in as
* IPIs in place of local APIC timers
@@ -136,72 +144,40 @@ void clear_local_APIC(void)
apic_read(APIC_ESR);
}
-void __init connect_bsp_APIC(void)
-{
- if (pic_mode) {
- /*
- * Do not trust the local APIC being empty at bootup.
- */
- clear_local_APIC();
- /*
- * PIC mode, enable APIC mode in the IMCR, i.e.
- * connect BSP's local APIC to INT and NMI lines.
- */
- apic_printk(APIC_VERBOSE, "leaving PIC mode, enabling APIC mode.\n");
- outb(0x70, 0x22);
- outb(0x01, 0x23);
- }
-}
-
void disconnect_bsp_APIC(int virt_wire_setup)
{
- if (pic_mode) {
- /*
- * Put the board back into PIC mode (has an effect
- * only on certain older boards). Note that APIC
- * interrupts, including IPIs, won't work beyond
- * this point! The only exception are INIT IPIs.
- */
- apic_printk(APIC_QUIET, "disabling APIC mode, entering PIC mode.\n");
- outb(0x70, 0x22);
- outb(0x00, 0x23);
- }
- else {
- /* Go back to Virtual Wire compatibility mode */
- unsigned long value;
-
- /* For the spurious interrupt use vector F, and enable it */
- value = apic_read(APIC_SPIV);
- value &= ~APIC_VECTOR_MASK;
- value |= APIC_SPIV_APIC_ENABLED;
- value |= 0xf;
- apic_write(APIC_SPIV, value);
-
- if (!virt_wire_setup) {
- /* For LVT0 make it edge triggered, active high, external and enabled */
- value = apic_read(APIC_LVT0);
- value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
- APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
- APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED );
- value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
- value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
- apic_write(APIC_LVT0, value);
- }
- else {
- /* Disable LVT0 */
- apic_write(APIC_LVT0, APIC_LVT_MASKED);
- }
+ /* Go back to Virtual Wire compatibility mode */
+ unsigned long value;
+
+ /* For the spurious interrupt use vector F, and enable it */
+ value = apic_read(APIC_SPIV);
+ value &= ~APIC_VECTOR_MASK;
+ value |= APIC_SPIV_APIC_ENABLED;
+ value |= 0xf;
+ apic_write(APIC_SPIV, value);
- /* For LVT1 make it edge triggered, active high, nmi and enabled */
- value = apic_read(APIC_LVT1);
- value &= ~(
- APIC_MODE_MASK | APIC_SEND_PENDING |
+ if (!virt_wire_setup) {
+ /* For LVT0 make it edge triggered, active high, external and enabled */
+ value = apic_read(APIC_LVT0);
+ value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
- APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
+ APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED );
value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
- value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
- apic_write(APIC_LVT1, value);
+ value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
+ apic_write(APIC_LVT0, value);
+ } else {
+ /* Disable LVT0 */
+ apic_write(APIC_LVT0, APIC_LVT_MASKED);
}
+
+ /* For LVT1 make it edge triggered, active high, nmi and enabled */
+ value = apic_read(APIC_LVT1);
+ value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
+ APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
+ APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
+ value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+ value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
+ apic_write(APIC_LVT1, value);
}
void disable_local_APIC(void)
@@ -297,8 +273,6 @@ void __init sync_Arb_IDs(void)
| APIC_DM_INIT);
}
-extern void __error_in_apic_c (void);
-
/*
* An initial setup of the virtual wire mode.
*/
@@ -345,8 +319,7 @@ void __cpuinit setup_local_APIC (void)
value = apic_read(APIC_LVR);
- if ((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f)
- __error_in_apic_c();
+ BUILD_BUG_ON((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f);
/*
* Double-check whether this APIC is really registered.
@@ -399,32 +372,8 @@ void __cpuinit setup_local_APIC (void)
*/
value |= APIC_SPIV_APIC_ENABLED;
- /*
- * Some unknown Intel IO/APIC (or APIC) errata is biting us with
- * certain networking cards. If high frequency interrupts are
- * happening on a particular IOAPIC pin, plus the IOAPIC routing
- * entry is masked/unmasked at a high rate as well then sooner or
- * later IOAPIC line gets 'stuck', no more interrupts are received
- * from the device. If focus CPU is disabled then the hang goes
- * away, oh well :-(
- *
- * [ This bug can be reproduced easily with a level-triggered
- * PCI Ne2000 networking cards and PII/PIII processors, dual
- * BX chipset. ]
- */
- /*
- * Actually disabling the focus CPU check just makes the hang less
- * frequent as it makes the interrupt distributon model be more
- * like LRU than MRU (the short-term load is more even across CPUs).
- * See also the comment in end_level_ioapic_irq(). --macro
- */
-#if 1
- /* Enable focus processor (bit==0) */
- value &= ~APIC_SPIV_FOCUS_DISABLED;
-#else
- /* Disable focus processor (bit==1) */
- value |= APIC_SPIV_FOCUS_DISABLED;
-#endif
+ /* We always use processor focus */
+
/*
* Set spurious IRQ vector
*/
@@ -442,7 +391,7 @@ void __cpuinit setup_local_APIC (void)
* TODO: set up through-local-APIC from through-I/O-APIC? --macro
*/
value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
- if (!smp_processor_id() && (pic_mode || !value)) {
+ if (!smp_processor_id() && !value) {
value = APIC_DM_EXTINT;
apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", smp_processor_id());
} else {
@@ -479,8 +428,7 @@ void __cpuinit setup_local_APIC (void)
}
nmi_watchdog_default();
- if (nmi_watchdog == NMI_LOCAL_APIC)
- setup_apic_nmi_watchdog();
+ setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
}
@@ -527,8 +475,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state)
apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
- local_save_flags(flags);
- local_irq_disable();
+ local_irq_save(flags);
disable_local_APIC();
local_irq_restore(flags);
return 0;
@@ -606,18 +553,24 @@ static void apic_pm_activate(void) { }
static int __init apic_set_verbosity(char *str)
{
+ if (str == NULL) {
+ skip_ioapic_setup = 0;
+ ioapic_force = 1;
+ return 0;
+ }
if (strcmp("debug", str) == 0)
apic_verbosity = APIC_DEBUG;
else if (strcmp("verbose", str) == 0)
apic_verbosity = APIC_VERBOSE;
- else
+ else {
printk(KERN_WARNING "APIC Verbosity level %s not recognised"
- " use apic=verbose or apic=debug", str);
+ " use apic=verbose or apic=debug\n", str);
+ return -EINVAL;
+ }
- return 1;
+ return 0;
}
-
-__setup("apic=", apic_set_verbosity);
+early_param("apic", apic_set_verbosity);
/*
* Detect and enable local APICs on non-SMP boards.
@@ -638,6 +591,40 @@ static int __init detect_init_APIC (void)
return 0;
}
+#ifdef CONFIG_X86_IO_APIC
+static struct resource * __init ioapic_setup_resources(void)
+{
+#define IOAPIC_RESOURCE_NAME_SIZE 11
+ unsigned long n;
+ struct resource *res;
+ char *mem;
+ int i;
+
+ if (nr_ioapics <= 0)
+ return NULL;
+
+ n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource);
+ n *= nr_ioapics;
+
+ res = alloc_bootmem(n);
+
+ if (!res)
+ return NULL;
+
+ memset(res, 0, n);
+ mem = (void *)&res[nr_ioapics];
+
+ for (i = 0; i < nr_ioapics; i++) {
+ res[i].name = mem;
+ res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ snprintf(mem, IOAPIC_RESOURCE_NAME_SIZE, "IOAPIC %u", i);
+ mem += IOAPIC_RESOURCE_NAME_SIZE;
+ }
+
+ return res;
+}
+#endif
+
void __init init_apic_mappings(void)
{
unsigned long apic_phys;
@@ -654,19 +641,26 @@ void __init init_apic_mappings(void)
apic_phys = mp_lapic_addr;
set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
+ apic_mapped = 1;
apic_printk(APIC_VERBOSE,"mapped APIC to %16lx (%16lx)\n", APIC_BASE, apic_phys);
+ /* Put local APIC into the resource map. */
+ lapic_resource.start = apic_phys;
+ lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
+ insert_resource(&iomem_resource, &lapic_resource);
+
/*
* Fetch the APIC ID of the BSP in case we have a
* default configuration (or the MP table is broken).
*/
boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID));
-#ifdef CONFIG_X86_IO_APIC
{
unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
int i;
+ struct resource *ioapic_res;
+ ioapic_res = ioapic_setup_resources();
for (i = 0; i < nr_ioapics; i++) {
if (smp_found_config) {
ioapic_phys = mp_ioapics[i].mpc_apicaddr;
@@ -678,9 +672,15 @@ void __init init_apic_mappings(void)
apic_printk(APIC_VERBOSE,"mapped IOAPIC to %016lx (%016lx)\n",
__fix_to_virt(idx), ioapic_phys);
idx++;
+
+ if (ioapic_res) {
+ ioapic_res->start = ioapic_phys;
+ ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
+ insert_resource(&iomem_resource, ioapic_res);
+ ioapic_res++;
+ }
}
}
-#endif
}
/*
@@ -951,7 +951,7 @@ void smp_local_timer_interrupt(struct pt_regs *regs)
* We take the 'long' return path, and there every subsystem
* grabs the appropriate locks (kernel lock/ irq lock).
*
- * we might want to decouple profiling from the 'long path',
+ * We might want to decouple profiling from the 'long path',
* and do the profiling totally in assembly.
*
* Currently this isn't too much of an issue (performance wise),
@@ -1123,19 +1123,15 @@ int __init APIC_init_uniprocessor (void)
verify_local_APIC();
- connect_bsp_APIC();
-
phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id);
apic_write(APIC_ID, SET_APIC_ID(boot_cpu_id));
setup_local_APIC();
-#ifdef CONFIG_X86_IO_APIC
if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
- setup_IO_APIC();
+ setup_IO_APIC();
else
nr_ioapics = 0;
-#endif
setup_boot_APIC_clock();
check_nmi_watchdog();
return 0;
@@ -1144,14 +1140,17 @@ int __init APIC_init_uniprocessor (void)
static __init int setup_disableapic(char *str)
{
disable_apic = 1;
- return 1;
-}
+ clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+ return 0;
+}
+early_param("disableapic", setup_disableapic);
+/* same as disableapic, for compatibility */
static __init int setup_nolapic(char *str)
{
- disable_apic = 1;
- return 1;
+ return setup_disableapic(str);
}
+early_param("nolapic", setup_nolapic);
static __init int setup_noapictimer(char *str)
{
@@ -1184,11 +1183,5 @@ static __init int setup_apicpmtimer(char *s)
}
__setup("apicpmtimer", setup_apicpmtimer);
-/* dummy parsing: see setup.c */
-
-__setup("disableapic", setup_disableapic);
-__setup("nolapic", setup_nolapic); /* same as disableapic, for compatibility */
-
__setup("noapictimer", setup_noapictimer);
-/* no "lapic" flag - we only use the lapic when the BIOS tells us so. */
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-05 01:04:40 +0000