diff options
Diffstat (limited to 'arch/x86_64')
68 files changed, 9 insertions, 25462 deletions
diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile index 189d80d3a89..afaf0f99887 100644 --- a/arch/x86_64/Makefile +++ b/arch/x86_64/Makefile @@ -21,6 +21,13 @@ # # $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $ +# Fill in SRCARCH +SRCARCH := x86 + +archprepare: + @mkdir -p ${objtree}/arch/x86/kernel + + LDFLAGS := -m elf_x86_64 OBJCOPYFLAGS := -O binary -R .note -R .comment -S LDFLAGS_vmlinux := @@ -71,10 +78,10 @@ CFLAGS += $(cflags-y) CFLAGS_KERNEL += $(cflags-kernel-y) AFLAGS += -m64 -head-y := arch/x86_64/kernel/head_64.o arch/x86_64/kernel/head64.o arch/x86_64/kernel/init_task_64.o +head-y := arch/x86/kernel/head_64.o arch/x86/kernel/head64.o arch/x86/kernel/init_task_64.o libs-y += arch/x86/lib/ -core-y += arch/x86_64/kernel/ \ +core-y += arch/x86/kernel/ \ arch/x86/mm/ \ arch/x86/crypto/ \ arch/x86/vdso/ diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile deleted file mode 100644 index 577d08f4b8b..00000000000 --- a/arch/x86_64/kernel/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -ifeq ($(CONFIG_X86_32),y) -include ${srctree}/arch/x86/kernel/Makefile_32 -else -include ${srctree}/arch/x86_64/kernel/Makefile_64 -endif diff --git a/arch/x86_64/kernel/Makefile_64 b/arch/x86_64/kernel/Makefile_64 deleted file mode 100644 index 120d4e51fd4..00000000000 --- a/arch/x86_64/kernel/Makefile_64 +++ /dev/null @@ -1,63 +0,0 @@ -# -# Makefile for the linux kernel. -# - -extra-y := head_64.o head64.o init_task_64.o vmlinux.lds -EXTRA_AFLAGS := -traditional -obj-y := process_64.o signal_64.o entry_64.o traps_64.o irq_64.o \ - ptrace_64.o time_64.o ioport_64.o ldt_64.o setup_64.o i8259_64.o sys_x86_64.o \ - x8664_ksyms_64.o i387_64.o syscall_64.o vsyscall_64.o \ - setup64.o bootflag.o e820_64.o reboot_64.o quirks.o i8237.o \ - pci-dma_64.o pci-nommu_64.o alternative.o hpet_64.o tsc_64.o bugs_64.o \ - perfctr-watchdog.o - -obj-$(CONFIG_STACKTRACE) += stacktrace.o -obj-$(CONFIG_X86_MCE) += mce_64.o therm_throt.o -obj-$(CONFIG_X86_MCE_INTEL) += mce_intel_64.o -obj-$(CONFIG_X86_MCE_AMD) += mce_amd_64.o -obj-$(CONFIG_MTRR) += ../../x86/kernel/cpu/mtrr/ -obj-$(CONFIG_ACPI) += ../../x86/kernel/acpi/ -obj-$(CONFIG_X86_MSR) += msr.o -obj-$(CONFIG_MICROCODE) += microcode.o -obj-$(CONFIG_X86_CPUID) += cpuid.o -obj-$(CONFIG_SMP) += smp_64.o smpboot_64.o trampoline_64.o tsc_sync.o -obj-y += apic_64.o nmi_64.o -obj-y += io_apic_64.o mpparse_64.o genapic_64.o genapic_flat_64.o -obj-$(CONFIG_KEXEC) += machine_kexec_64.o relocate_kernel_64.o crash_64.o -obj-$(CONFIG_CRASH_DUMP) += crash_dump_64.o -obj-$(CONFIG_PM) += suspend_64.o -obj-$(CONFIG_HIBERNATION) += suspend_asm_64.o -obj-$(CONFIG_CPU_FREQ) += ../../x86/kernel/cpu/cpufreq/ -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_IOMMU) += pci-gart_64.o aperture_64.o -obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o -obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o -obj-$(CONFIG_KPROBES) += kprobes_64.o -obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o -obj-$(CONFIG_X86_VSMP) += vsmp_64.o -obj-$(CONFIG_K8_NB) += k8.o -obj-$(CONFIG_AUDIT) += audit_64.o - -obj-$(CONFIG_MODULES) += module_64.o -obj-$(CONFIG_PCI) += early-quirks_64.o - -obj-y += topology.o -obj-y += intel_cacheinfo.o -obj-y += addon_cpuid_features.o -obj-y += pcspeaker.o - -CFLAGS_vsyscall_64.o := $(PROFILING) -g0 - -therm_throt-y += ../../x86/kernel/cpu/mcheck/therm_throt.o -bootflag-y += ../../x86/kernel/bootflag.o -cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../x86/kernel/cpuid.o -topology-y += ../../x86/kernel/topology.o -microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../x86/kernel/microcode.o -intel_cacheinfo-y += ../../x86/kernel/cpu/intel_cacheinfo.o -addon_cpuid_features-y += ../../x86/kernel/cpu/addon_cpuid_features.o -quirks-y += ../../x86/kernel/quirks.o -i8237-y += ../../x86/kernel/i8237.o -msr-$(subst m,y,$(CONFIG_X86_MSR)) += ../../x86/kernel/msr.o -alternative-y += ../../x86/kernel/alternative.o -pcspeaker-y += ../../x86/kernel/pcspeaker.o -perfctr-watchdog-y += ../../x86/kernel/cpu/perfctr-watchdog.o diff --git a/arch/x86_64/kernel/aperture_64.c b/arch/x86_64/kernel/aperture_64.c deleted file mode 100644 index 8f681cae7bf..00000000000 --- a/arch/x86_64/kernel/aperture_64.c +++ /dev/null @@ -1,298 +0,0 @@ -/* - * Firmware replacement code. - * - * Work around broken BIOSes that don't set an aperture or only set the - * aperture in the AGP bridge. - * If all fails map the aperture over some low memory. This is cheaper than - * doing bounce buffering. The memory is lost. This is done at early boot - * because only the bootmem allocator can allocate 32+MB. - * - * Copyright 2002 Andi Kleen, SuSE Labs. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/bootmem.h> -#include <linux/mmzone.h> -#include <linux/pci_ids.h> -#include <linux/pci.h> -#include <linux/bitops.h> -#include <linux/ioport.h> -#include <asm/e820.h> -#include <asm/io.h> -#include <asm/iommu.h> -#include <asm/pci-direct.h> -#include <asm/dma.h> -#include <asm/k8.h> - -int iommu_aperture; -int iommu_aperture_disabled __initdata = 0; -int iommu_aperture_allowed __initdata = 0; - -int fallback_aper_order __initdata = 1; /* 64MB */ -int fallback_aper_force __initdata = 0; - -int fix_aperture __initdata = 1; - -static struct resource gart_resource = { - .name = "GART", - .flags = IORESOURCE_MEM, -}; - -static void __init insert_aperture_resource(u32 aper_base, u32 aper_size) -{ - gart_resource.start = aper_base; - gart_resource.end = aper_base + aper_size - 1; - insert_resource(&iomem_resource, &gart_resource); -} - -/* This code runs before the PCI subsystem is initialized, so just - access the northbridge directly. */ - -static u32 __init allocate_aperture(void) -{ - u32 aper_size; - void *p; - - if (fallback_aper_order > 7) - fallback_aper_order = 7; - aper_size = (32 * 1024 * 1024) << fallback_aper_order; - - /* - * Aperture has to be naturally aligned. This means an 2GB aperture won't - * have much chance of finding a place in the lower 4GB of memory. - * Unfortunately we cannot move it up because that would make the - * IOMMU useless. - */ - p = __alloc_bootmem_nopanic(aper_size, aper_size, 0); - if (!p || __pa(p)+aper_size > 0xffffffff) { - printk("Cannot allocate aperture memory hole (%p,%uK)\n", - p, aper_size>>10); - if (p) - free_bootmem(__pa(p), aper_size); - return 0; - } - printk("Mapping aperture over %d KB of RAM @ %lx\n", - aper_size >> 10, __pa(p)); - insert_aperture_resource((u32)__pa(p), aper_size); - return (u32)__pa(p); -} - -static int __init aperture_valid(u64 aper_base, u32 aper_size) -{ - if (!aper_base) - return 0; - if (aper_size < 64*1024*1024) { - printk("Aperture too small (%d MB)\n", aper_size>>20); - return 0; - } - if (aper_base + aper_size > 0x100000000UL) { - printk("Aperture beyond 4GB. Ignoring.\n"); - return 0; - } - if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { - printk("Aperture pointing to e820 RAM. Ignoring.\n"); - return 0; - } - return 1; -} - -/* Find a PCI capability */ -static __u32 __init find_cap(int num, int slot, int func, int cap) -{ - u8 pos; - int bytes; - if (!(read_pci_config_16(num,slot,func,PCI_STATUS) & PCI_STATUS_CAP_LIST)) - return 0; - pos = read_pci_config_byte(num,slot,func,PCI_CAPABILITY_LIST); - for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { - u8 id; - pos &= ~3; - id = read_pci_config_byte(num,slot,func,pos+PCI_CAP_LIST_ID); - if (id == 0xff) - break; - if (id == cap) - return pos; - pos = read_pci_config_byte(num,slot,func,pos+PCI_CAP_LIST_NEXT); - } - return 0; -} - -/* Read a standard AGPv3 bridge header */ -static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) -{ - u32 apsize; - u32 apsizereg; - int nbits; - u32 aper_low, aper_hi; - u64 aper; - - printk("AGP bridge at %02x:%02x:%02x\n", num, slot, func); - apsizereg = read_pci_config_16(num,slot,func, cap + 0x14); - if (apsizereg == 0xffffffff) { - printk("APSIZE in AGP bridge unreadable\n"); - return 0; - } - - apsize = apsizereg & 0xfff; - /* Some BIOS use weird encodings not in the AGPv3 table. */ - if (apsize & 0xff) - apsize |= 0xf00; - nbits = hweight16(apsize); - *order = 7 - nbits; - if ((int)*order < 0) /* < 32MB */ - *order = 0; - - aper_low = read_pci_config(num,slot,func, 0x10); - aper_hi = read_pci_config(num,slot,func,0x14); - aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32); - - printk("Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n", - aper, 32 << *order, apsizereg); - - if (!aperture_valid(aper, (32*1024*1024) << *order)) - return 0; - return (u32)aper; -} - -/* Look for an AGP bridge. Windows only expects the aperture in the - AGP bridge and some BIOS forget to initialize the Northbridge too. - Work around this here. - - Do an PCI bus scan by hand because we're running before the PCI - subsystem. - - All K8 AGP bridges are AGPv3 compliant, so we can do this scan - generically. It's probably overkill to always scan all slots because - the AGP bridges should be always an own bus on the HT hierarchy, - but do it here for future safety. */ -static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) -{ - int num, slot, func; - - /* Poor man's PCI discovery */ - for (num = 0; num < 256; num++) { - for (slot = 0; slot < 32; slot++) { - for (func = 0; func < 8; func++) { - u32 class, cap; - u8 type; - class = read_pci_config(num,slot,func, - PCI_CLASS_REVISION); - if (class == 0xffffffff) - break; - - switch (class >> 16) { - case PCI_CLASS_BRIDGE_HOST: - case PCI_CLASS_BRIDGE_OTHER: /* needed? */ - /* AGP bridge? */ - cap = find_cap(num,slot,func,PCI_CAP_ID_AGP); - if (!cap) - break; - *valid_agp = 1; - return read_agp(num,slot,func,cap,order); - } - - /* No multi-function device? */ - type = read_pci_config_byte(num,slot,func, - PCI_HEADER_TYPE); - if (!(type & 0x80)) - break; - } - } - } - printk("No AGP bridge found\n"); - return 0; -} - -void __init iommu_hole_init(void) -{ - int fix, num; - u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; - u64 aper_base, last_aper_base = 0; - int valid_agp = 0; - - if (iommu_aperture_disabled || !fix_aperture || !early_pci_allowed()) - return; - - printk(KERN_INFO "Checking aperture...\n"); - - fix = 0; - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - iommu_detected = 1; - iommu_aperture = 1; - - aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7; - aper_size = (32 * 1024 * 1024) << aper_order; - aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff; - aper_base <<= 25; - - printk("CPU %d: aperture @ %Lx size %u MB\n", num-24, - aper_base, aper_size>>20); - - if (!aperture_valid(aper_base, aper_size)) { - fix = 1; - break; - } - - if ((last_aper_order && aper_order != last_aper_order) || - (last_aper_base && aper_base != last_aper_base)) { - fix = 1; - break; - } - last_aper_order = aper_order; - last_aper_base = aper_base; - } - - if (!fix && !fallback_aper_force) { - if (last_aper_base) { - unsigned long n = (32 * 1024 * 1024) << last_aper_order; - insert_aperture_resource((u32)last_aper_base, n); - } - return; - } - - if (!fallback_aper_force) - aper_alloc = search_agp_bridge(&aper_order, &valid_agp); - - if (aper_alloc) { - /* Got the aperture from the AGP bridge */ - } else if (swiotlb && !valid_agp) { - /* Do nothing */ - } else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) || - force_iommu || - valid_agp || - fallback_aper_force) { - printk("Your BIOS doesn't leave a aperture memory hole\n"); - printk("Please enable the IOMMU option in the BIOS setup\n"); - printk("This costs you %d MB of RAM\n", - 32 << fallback_aper_order); - - aper_order = fallback_aper_order; - aper_alloc = allocate_aperture(); - if (!aper_alloc) { - /* Could disable AGP and IOMMU here, but it's probably - not worth it. But the later users cannot deal with - bad apertures and turning on the aperture over memory - causes very strange problems, so it's better to - panic early. */ - panic("Not enough memory for aperture"); - } - } else { - return; - } - - /* Fix up the north bridges */ - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - /* Don't enable translation yet. That is done later. - Assume this BIOS didn't initialise the GART so - just overwrite all previous bits */ - write_pci_config(0, num, 3, 0x90, aper_order<<1); - write_pci_config(0, num, 3, 0x94, aper_alloc>>25); - } -} diff --git a/arch/x86_64/kernel/apic_64.c b/arch/x86_64/kernel/apic_64.c deleted file mode 100644 index 925758dbca0..00000000000 --- a/arch/x86_64/kernel/apic_64.c +++ /dev/null @@ -1,1253 +0,0 @@ -/* - * Local APIC handling, local APIC timers - * - * (c) 1999, 2000 Ingo Molnar <mingo@redhat.com> - * - * Fixes - * Maciej W. Rozycki : Bits for genuine 82489DX APICs; - * thanks to Eric Gilmore - * and Rolf G. Tews - * for testing these extensively. - * Maciej W. Rozycki : Various updates and fixes. - * Mikael Pettersson : Power Management for UP-APIC. - * Pavel Machek and - * Mikael Pettersson : PM converted to driver model. - */ - -#include <linux/init.h> - -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/bootmem.h> -#include <linux/interrupt.h> -#include <linux/mc146818rtc.h> -#include <linux/kernel_stat.h> -#include <linux/sysdev.h> -#include <linux/module.h> -#include <linux/ioport.h> - -#include <asm/atomic.h> -#include <asm/smp.h> -#include <asm/mtrr.h> -#include <asm/mpspec.h> -#include <asm/pgalloc.h> -#include <asm/mach_apic.h> -#include <asm/nmi.h> -#include <asm/idle.h> -#include <asm/proto.h> -#include <asm/timex.h> -#include <asm/hpet.h> -#include <asm/apic.h> - -int apic_mapped; -int apic_verbosity; -int apic_runs_main_timer; -int apic_calibrate_pmtmr __initdata; - -int disable_apic_timer __initdata; - -/* Local APIC timer works in C2? */ -int local_apic_timer_c2_ok; -EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); - -static struct resource *ioapic_resources; -static struct resource lapic_resource = { - .name = "Local APIC", - .flags = IORESOURCE_MEM | IORESOURCE_BUSY, -}; - -/* - * cpu_mask that denotes the CPUs that needs timer interrupt coming in as - * IPIs in place of local APIC timers - */ -static cpumask_t timer_interrupt_broadcast_ipi_mask; - -/* Using APIC to generate smp_local_timer_interrupt? */ -int using_apic_timer __read_mostly = 0; - -static void apic_pm_activate(void); - -void apic_wait_icr_idle(void) -{ - while (apic_read(APIC_ICR) & APIC_ICR_BUSY) - cpu_relax(); -} - -unsigned int safe_apic_wait_icr_idle(void) -{ - unsigned int send_status; - int timeout; - - timeout = 0; - do { - send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY; - if (!send_status) - break; - udelay(100); - } while (timeout++ < 1000); - - return send_status; -} - -void enable_NMI_through_LVT0 (void * dummy) -{ - unsigned int v; - - /* unmask and set to NMI */ - v = APIC_DM_NMI; - apic_write(APIC_LVT0, v); -} - -int get_maxlvt(void) -{ - unsigned int v, maxlvt; - - v = apic_read(APIC_LVR); - maxlvt = GET_APIC_MAXLVT(v); - return maxlvt; -} - -/* - * 'what should we do if we get a hw irq event on an illegal vector'. - * each architecture has to answer this themselves. - */ -void ack_bad_irq(unsigned int irq) -{ - printk("unexpected IRQ trap at vector %02x\n", irq); - /* - * Currently unexpected vectors happen only on SMP and APIC. - * We _must_ ack these because every local APIC has only N - * irq slots per priority level, and a 'hanging, unacked' IRQ - * holds up an irq slot - in excessive cases (when multiple - * unexpected vectors occur) that might lock up the APIC - * completely. - * But don't ack when the APIC is disabled. -AK - */ - if (!disable_apic) - ack_APIC_irq(); -} - -void clear_local_APIC(void) -{ - int maxlvt; - unsigned int v; - - maxlvt = get_maxlvt(); - - /* - * Masking an LVT entry can trigger a local APIC error - * if the vector is zero. Mask LVTERR first to prevent this. - */ - if (maxlvt >= 3) { - v = ERROR_APIC_VECTOR; /* any non-zero vector will do */ - apic_write(APIC_LVTERR, v | APIC_LVT_MASKED); - } - /* - * Careful: we have to set masks only first to deassert - * any level-triggered sources. - */ - v = apic_read(APIC_LVTT); - apic_write(APIC_LVTT, v | APIC_LVT_MASKED); - v = apic_read(APIC_LVT0); - apic_write(APIC_LVT0, v | APIC_LVT_MASKED); - v = apic_read(APIC_LVT1); - apic_write(APIC_LVT1, v | APIC_LVT_MASKED); - if (maxlvt >= 4) { - v = apic_read(APIC_LVTPC); - apic_write(APIC_LVTPC, v | APIC_LVT_MASKED); - } - - /* - * Clean APIC state for other OSs: - */ - apic_write(APIC_LVTT, APIC_LVT_MASKED); - apic_write(APIC_LVT0, APIC_LVT_MASKED); - apic_write(APIC_LVT1, APIC_LVT_MASKED); - if (maxlvt >= 3) - apic_write(APIC_LVTERR, APIC_LVT_MASKED); - if (maxlvt >= 4) - apic_write(APIC_LVTPC, APIC_LVT_MASKED); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); -} - -void disconnect_bsp_APIC(int virt_wire_setup) -{ - /* Go back to Virtual Wire compatibility mode */ - unsigned long value; - - /* For the spurious interrupt use vector F, and enable it */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - value |= 0xf; - apic_write(APIC_SPIV, value); - - if (!virt_wire_setup) { - /* For LVT0 make it edge triggered, active high, external and enabled */ - value = apic_read(APIC_LVT0); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); - apic_write(APIC_LVT0, value); - } else { - /* Disable LVT0 */ - apic_write(APIC_LVT0, APIC_LVT_MASKED); - } - - /* For LVT1 make it edge triggered, active high, nmi and enabled */ - value = apic_read(APIC_LVT1); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); - apic_write(APIC_LVT1, value); -} - -void disable_local_APIC(void) -{ - unsigned int value; - - clear_local_APIC(); - - /* - * Disable APIC (implies clearing of registers - * for 82489DX!). - */ - value = apic_read(APIC_SPIV); - value &= ~APIC_SPIV_APIC_ENABLED; - apic_write(APIC_SPIV, value); -} - -/* - * This is to verify that we're looking at a real local APIC. - * Check these against your board if the CPUs aren't getting - * started for no apparent reason. - */ -int __init verify_local_APIC(void) -{ - unsigned int reg0, reg1; - - /* - * The version register is read-only in a real APIC. - */ - reg0 = apic_read(APIC_LVR); - apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0); - apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK); - reg1 = apic_read(APIC_LVR); - apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1); - - /* - * The two version reads above should print the same - * numbers. If the second one is different, then we - * poke at a non-APIC. - */ - if (reg1 != reg0) - return 0; - - /* - * Check if the version looks reasonably. - */ - reg1 = GET_APIC_VERSION(reg0); - if (reg1 == 0x00 || reg1 == 0xff) - return 0; - reg1 = get_maxlvt(); - if (reg1 < 0x02 || reg1 == 0xff) - return 0; - - /* - * The ID register is read/write in a real APIC. - */ - reg0 = apic_read(APIC_ID); - apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); - apic_write(APIC_ID, reg0 ^ APIC_ID_MASK); - reg1 = apic_read(APIC_ID); - apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1); - apic_write(APIC_ID, reg0); - if (reg1 != (reg0 ^ APIC_ID_MASK)) - return 0; - - /* - * The next two are just to see if we have sane values. - * They're only really relevant if we're in Virtual Wire - * compatibility mode, but most boxes are anymore. - */ - reg0 = apic_read(APIC_LVT0); - apic_printk(APIC_DEBUG,"Getting LVT0: %x\n", reg0); - reg1 = apic_read(APIC_LVT1); - apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1); - - return 1; -} - -void __init sync_Arb_IDs(void) -{ - /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */ - unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR)); - if (ver >= 0x14) /* P4 or higher */ - return; - - /* - * Wait for idle. - */ - apic_wait_icr_idle(); - - apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); - apic_write(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG - | APIC_DM_INIT); -} - -/* - * An initial setup of the virtual wire mode. - */ -void __init init_bsp_APIC(void) -{ - unsigned int value; - - /* - * Don't do the setup now if we have a SMP BIOS as the - * through-I/O-APIC virtual wire mode might be active. - */ - if (smp_found_config || !cpu_has_apic) - return; - - value = apic_read(APIC_LVR); - - /* - * Do not trust the local APIC being empty at bootup. - */ - clear_local_APIC(); - - /* - * Enable APIC. - */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - value |= APIC_SPIV_FOCUS_DISABLED; - value |= SPURIOUS_APIC_VECTOR; - apic_write(APIC_SPIV, value); - - /* - * Set up the virtual wire mode. - */ - apic_write(APIC_LVT0, APIC_DM_EXTINT); - value = APIC_DM_NMI; - apic_write(APIC_LVT1, value); -} - -void __cpuinit setup_local_APIC (void) -{ - unsigned int value, maxlvt; - int i, j; - - value = apic_read(APIC_LVR); - - BUILD_BUG_ON((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f); - - /* - * Double-check whether this APIC is really registered. - * This is meaningless in clustered apic mode, so we skip it. - */ - if (!apic_id_registered()) - BUG(); - - /* - * Intel recommends to set DFR, LDR and TPR before enabling - * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel - * document number 292116). So here it goes... - */ - init_apic_ldr(); - - /* - * Set Task Priority to 'accept all'. We never change this - * later on. - */ - value = apic_read(APIC_TASKPRI); - value &= ~APIC_TPRI_MASK; - apic_write(APIC_TASKPRI, value); - - /* - * After a crash, we no longer service the interrupts and a pending - * interrupt from previous kernel might still have ISR bit set. - * - * Most probably by now CPU has serviced that pending interrupt and - * it might not have done the ack_APIC_irq() because it thought, - * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it - * does not clear the ISR bit and cpu thinks it has already serivced - * the interrupt. Hence a vector might get locked. It was noticed - * for timer irq (vector 0x31). Issue an extra EOI to clear ISR. - */ - for (i = APIC_ISR_NR - 1; i >= 0; i--) { - value = apic_read(APIC_ISR + i*0x10); - for (j = 31; j >= 0; j--) { - if (value & (1<<j)) - ack_APIC_irq(); - } - } - - /* - * Now that we are all set up, enable the APIC - */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - /* - * Enable APIC - */ - value |= APIC_SPIV_APIC_ENABLED; - - /* We always use processor focus */ - - /* - * Set spurious IRQ vector - */ - value |= SPURIOUS_APIC_VECTOR; - apic_write(APIC_SPIV, value); - - /* - * Set up LVT0, LVT1: - * - * set up through-local-APIC on the BP's LINT0. This is not - * strictly necessary in pure symmetric-IO mode, but sometimes - * we delegate interrupts to the 8259A. - */ - /* - * TODO: set up through-local-APIC from through-I/O-APIC? --macro - */ - value = apic_read(APIC_LVT0) & APIC_LVT_MASKED; - if (!smp_processor_id() && !value) { - value = APIC_DM_EXTINT; - apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", smp_processor_id()); - } else { - value = APIC_DM_EXTINT | APIC_LVT_MASKED; - apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", smp_processor_id()); - } - apic_write(APIC_LVT0, value); - - /* - * only the BP should see the LINT1 NMI signal, obviously. - */ - if (!smp_processor_id()) - value = APIC_DM_NMI; - else - value = APIC_DM_NMI | APIC_LVT_MASKED; - apic_write(APIC_LVT1, value); - - { - unsigned oldvalue; - maxlvt = get_maxlvt(); - oldvalue = apic_read(APIC_ESR); - value = ERROR_APIC_VECTOR; // enables sending errors - apic_write(APIC_LVTERR, value); - /* - * spec says clear errors after enabling vector. - */ - if (maxlvt > 3) - apic_write(APIC_ESR, 0); - value = apic_read(APIC_ESR); - if (value != oldvalue) - apic_printk(APIC_VERBOSE, - "ESR value after enabling vector: %08x, after %08x\n", - oldvalue, value); - } - - nmi_watchdog_default(); - setup_apic_nmi_watchdog(NULL); - apic_pm_activate(); -} - -#ifdef CONFIG_PM - -static struct { - /* 'active' is true if the local APIC was enabled by us and - not the BIOS; this signifies that we are also responsible - for disabling it before entering apm/acpi suspend */ - int active; - /* r/w apic fields */ - unsigned int apic_id; - unsigned int apic_taskpri; - unsigned int apic_ldr; - unsigned int apic_dfr; - unsigned int apic_spiv; - unsigned int apic_lvtt; - unsigned int apic_lvtpc; - unsigned int apic_lvt0; - unsigned int apic_lvt1; - unsigned int apic_lvterr; - unsigned int apic_tmict; - unsigned int apic_tdcr; - unsigned int apic_thmr; -} apic_pm_state; - -static int lapic_suspend(struct sys_device *dev, pm_message_t state) -{ - unsigned long flags; - int maxlvt; - - if (!apic_pm_state.active) - return 0; - - maxlvt = get_maxlvt(); - - apic_pm_state.apic_id = apic_read(APIC_ID); - apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); - apic_pm_state.apic_ldr = apic_read(APIC_LDR); - apic_pm_state.apic_dfr = apic_read(APIC_DFR); - apic_pm_state.apic_spiv = apic_read(APIC_SPIV); - apic_pm_state.apic_lvtt = apic_read(APIC_LVTT); - if (maxlvt >= 4) - apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC); - apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0); - apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1); - apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); - apic_pm_state.apic_tmict = apic_read(APIC_TMICT); - apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); -#ifdef CONFIG_X86_MCE_INTEL - if (maxlvt >= 5) - apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); -#endif - local_irq_save(flags); - disable_local_APIC(); - local_irq_restore(flags); - return 0; -} - -static int lapic_resume(struct sys_device *dev) -{ - unsigned int l, h; - unsigned long flags; - int maxlvt; - - if (!apic_pm_state.active) - return 0; - - maxlvt = get_maxlvt(); - - local_irq_save(flags); - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); - apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); - apic_write(APIC_ID, apic_pm_state.apic_id); - apic_write(APIC_DFR, apic_pm_state.apic_dfr); - apic_write(APIC_LDR, apic_pm_state.apic_ldr); - apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri); - apic_write(APIC_SPIV, apic_pm_state.apic_spiv); - apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); - apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); -#ifdef CONFIG_X86_MCE_INTEL - if (maxlvt >= 5) - apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); -#endif - if (maxlvt >= 4) - apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc); - apic_write(APIC_LVTT, apic_pm_state.apic_lvtt); - apic_write(APIC_TDCR, apic_pm_state.apic_tdcr); - apic_write(APIC_TMICT, apic_pm_state.apic_tmict); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - local_irq_restore(flags); - return 0; -} - -static struct sysdev_class lapic_sysclass = { - set_kset_name("lapic"), - .resume = lapic_resume, - .suspend = lapic_suspend, -}; - -static struct sys_device device_lapic = { - .id = 0, - .cls = &lapic_sysclass, -}; - -static void __cpuinit apic_pm_activate(void) -{ - apic_pm_state.active = 1; -} - -static int __init init_lapic_sysfs(void) -{ - int error; - if (!cpu_has_apic) - return 0; - /* XXX: remove suspend/resume procs if !apic_pm_state.active? */ - error = sysdev_class_register(&lapic_sysclass); - if (!error) - error = sysdev_register(&device_lapic); - return error; -} -device_initcall(init_lapic_sysfs); - -#else /* CONFIG_PM */ - -static void apic_pm_activate(void) { } - -#endif /* CONFIG_PM */ - -static int __init apic_set_verbosity(char *str) -{ - if (str == NULL) { - skip_ioapic_setup = 0; - ioapic_force = 1; - return 0; - } - if (strcmp("debug", str) == 0) - apic_verbosity = APIC_DEBUG; - else if (strcmp("verbose", str) == 0) - apic_verbosity = APIC_VERBOSE; - else { - printk(KERN_WARNING "APIC Verbosity level %s not recognised" - " use apic=verbose or apic=debug\n", str); - return -EINVAL; - } - - return 0; -} -early_param("apic", apic_set_verbosity); - -/* - * Detect and enable local APICs on non-SMP boards. - * Original code written by Keir Fraser. - * On AMD64 we trust the BIOS - if it says no APIC it is likely - * not correctly set up (usually the APIC timer won't work etc.) - */ - -static int __init detect_init_APIC (void) -{ - if (!cpu_has_apic) { - printk(KERN_INFO "No local APIC present\n"); - return -1; - } - - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - boot_cpu_id = 0; - return 0; -} - -#ifdef CONFIG_X86_IO_APIC -static struct resource * __init ioapic_setup_resources(void) -{ -#define IOAPIC_RESOURCE_NAME_SIZE 11 - unsigned long n; - struct resource *res; - char *mem; - int i; - - if (nr_ioapics <= 0) - return NULL; - - n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource); - n *= nr_ioapics; - - mem = alloc_bootmem(n); - res = (void *)mem; - - if (mem != NULL) { - memset(mem, 0, n); - mem += sizeof(struct resource) * nr_ioapics; - - for (i = 0; i < nr_ioapics; i++) { - res[i].name = mem; - res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY; - sprintf(mem, "IOAPIC %u", i); - mem += IOAPIC_RESOURCE_NAME_SIZE; - } - } - - ioapic_resources = res; - - return res; -} - -static int __init ioapic_insert_resources(void) -{ - int i; - struct resource *r = ioapic_resources; - - if (!r) { - printk("IO APIC resources could be not be allocated.\n"); - return -1; - } - - for (i = 0; i < nr_ioapics; i++) { - insert_resource(&iomem_resource, r); - r++; - } - - return 0; -} - -/* Insert the IO APIC resources after PCI initialization has occured to handle - * IO APICS that are mapped in on a BAR in PCI space. */ -late_initcall(ioapic_insert_resources); -#endif - -void __init init_apic_mappings(void) -{ - unsigned long apic_phys; - - /* - * If no local APIC can be found then set up a fake all - * zeroes page to simulate the local APIC and another - * one for the IO-APIC. - */ - if (!smp_found_config && detect_init_APIC()) { - apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); - apic_phys = __pa(apic_phys); - } else - apic_phys = mp_lapic_addr; - - set_fixmap_nocache(FIX_APIC_BASE, apic_phys); - apic_mapped = 1; - apic_printk(APIC_VERBOSE,"mapped APIC to %16lx (%16lx)\n", APIC_BASE, apic_phys); - - /* Put local APIC into the resource map. */ - lapic_resource.start = apic_phys; - lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1; - insert_resource(&iomem_resource, &lapic_resource); - - /* - * Fetch the APIC ID of the BSP in case we have a - * default configuration (or the MP table is broken). - */ - boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID)); - - { - unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; - int i; - struct resource *ioapic_res; - - ioapic_res = ioapic_setup_resources(); - for (i = 0; i < nr_ioapics; i++) { - if (smp_found_config) { - ioapic_phys = mp_ioapics[i].mpc_apicaddr; - } else { - ioapic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); - ioapic_phys = __pa(ioapic_phys); - } - set_fixmap_nocache(idx, ioapic_phys); - apic_printk(APIC_VERBOSE,"mapped IOAPIC to %016lx (%016lx)\n", - __fix_to_virt(idx), ioapic_phys); - idx++; - - if (ioapic_res != NULL) { - ioapic_res->start = ioapic_phys; - ioapic_res->end = ioapic_phys + (4 * 1024) - 1; - ioapic_res++; - } - } - } -} - -/* - * This function sets up the local APIC timer, with a timeout of - * 'clocks' APIC bus clock. During calibration we actually call - * this function twice on the boot CPU, once with a bogus timeout - * value, second time for real. The other (noncalibrating) CPUs - * call this function only once, with the real, calibrated value. - * - * We do reads before writes even if unnecessary, to get around the - * P5 APIC double write bug. - */ - -#define APIC_DIVISOR 16 - -static void __setup_APIC_LVTT(unsigned int clocks) -{ - unsigned int lvtt_value, tmp_value; - int cpu = smp_processor_id(); - - lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR; - - if (cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) - lvtt_value |= APIC_LVT_MASKED; - - apic_write(APIC_LVTT, lvtt_value); - - /* - * Divide PICLK by 16 - */ - tmp_value = apic_read(APIC_TDCR); - apic_write(APIC_TDCR, (tmp_value - & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) - | APIC_TDR_DIV_16); - - apic_write(APIC_TMICT, clocks/APIC_DIVISOR); -} - -static void setup_APIC_timer(unsigned int clocks) -{ - unsigned long flags; - - local_irq_save(flags); - - /* wait for irq slice */ - if (hpet_address && hpet_use_timer) { - u32 trigger = hpet_readl(HPET_T0_CMP); - while (hpet_readl(HPET_T0_CMP) == trigger) - /* do nothing */ ; - } else { - int c1, c2; - outb_p(0x00, 0x43); - c2 = inb_p(0x40); - c2 |= inb_p(0x40) << 8; - do { - c1 = c2; - outb_p(0x00, 0x43); - c2 = inb_p(0x40); - c2 |= inb_p(0x40) << 8; - } while (c2 - c1 < 300); - } - __setup_APIC_LVTT(clocks); - /* Turn off PIT interrupt if we use APIC timer as main timer. - Only works with the PM timer right now - TBD fix it for HPET too. */ - if ((pmtmr_ioport != 0) && - smp_processor_id() == boot_cpu_id && - apic_runs_main_timer == 1 && - !cpu_isset(boot_cpu_id, timer_interrupt_broadcast_ipi_mask)) { - stop_timer_interrupt(); - apic_runs_main_timer++; - } - local_irq_restore(flags); -} - -/* - * In this function we calibrate APIC bus clocks to the external - * timer. Unfortunately we cannot use jiffies and the timer irq - * to calibrate, since some later bootup code depends on getting - * the first irq? Ugh. - * - * We want to do the calibration only once since we - * want to have local timer irqs syncron. CPUs connected - * by the same APIC bus have the very same bus frequency. - * And we want to have irqs off anyways, no accidental - * APIC irq that way. - */ - -#define TICK_COUNT 100000000 - -static int __init calibrate_APIC_clock(void) -{ - unsigned apic, apic_start; - unsigned long tsc, tsc_start; - int result; - /* - * Put whatever arbitrary (but long enough) timeout - * value into the APIC clock, we just want to get the - * counter running for calibration. - */ - __setup_APIC_LVTT(4000000000); - - apic_start = apic_read(APIC_TMCCT); -#ifdef CONFIG_X86_PM_TIMER - if (apic_calibrate_pmtmr && pmtmr_ioport) { - pmtimer_wait(5000); /* 5ms wait */ - apic = apic_read(APIC_TMCCT); - result = (apic_start - apic) * 1000L / 5; - } else -#endif - { - rdtscll(tsc_start); - - do { - apic = apic_read(APIC_TMCCT); - rdtscll(tsc); - } while ((tsc - tsc_start) < TICK_COUNT && - (apic_start - apic) < TICK_COUNT); - - result = (apic_start - apic) * 1000L * tsc_khz / - (tsc - tsc_start); - } - printk("result %d\n", result); - - - printk(KERN_INFO "Detected %d.%03d MHz APIC timer.\n", - result / 1000 / 1000, result / 1000 % 1000); - - return result * APIC_DIVISOR / HZ; -} - -static unsigned int calibration_result; - -void __init setup_boot_APIC_clock (void) -{ - if (disable_apic_timer) { - printk(KERN_INFO "Disabling APIC timer\n"); - return; - } - - printk(KERN_INFO "Using local APIC timer interrupts.\n"); - using_apic_timer = 1; - - local_irq_disable(); - - calibration_result = calibrate_APIC_clock(); - /* - * Now set up the timer for real. - */ - setup_APIC_timer(calibration_result); - - local_irq_enable(); -} - -void __cpuinit setup_secondary_APIC_clock(void) -{ - local_irq_disable(); /* FIXME: Do we need this? --RR */ - setup_APIC_timer(calibration_result); - local_irq_enable(); -} - -void disable_APIC_timer(void) -{ - if (using_apic_timer) { - unsigned long v; - - v = apic_read(APIC_LVTT); - /* - * When an illegal vector value (0-15) is written to an LVT - * entry and delivery mode is Fixed, the APIC may signal an - * illegal vector error, with out regard to whether the mask - * bit is set or whether an interrupt is actually seen on input. - * - * Boot sequence might call this function when the LVTT has - * '0' vector value. So make sure vector field is set to - * valid value. - */ - v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write(APIC_LVTT, v); - } -} - -void enable_APIC_timer(void) -{ - int cpu = smp_processor_id(); - - if (using_apic_timer && - !cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) { - unsigned long v; - - v = apic_read(APIC_LVTT); - apic_write(APIC_LVTT, v & ~APIC_LVT_MASKED); - } -} - -void switch_APIC_timer_to_ipi(void *cpumask) -{ - cpumask_t mask = *(cpumask_t *)cpumask; - int cpu = smp_processor_id(); - - if (cpu_isset(cpu, mask) && - !cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) { - disable_APIC_timer(); - cpu_set(cpu, timer_interrupt_broadcast_ipi_mask); - } -} -EXPORT_SYMBOL(switch_APIC_timer_to_ipi); - -void smp_send_timer_broadcast_ipi(void) -{ - int cpu = smp_processor_id(); - cpumask_t mask; - - cpus_and(mask, cpu_online_map, timer_interrupt_broadcast_ipi_mask); - - if (cpu_isset(cpu, mask)) { - cpu_clear(cpu, mask); - add_pda(apic_timer_irqs, 1); - smp_local_timer_interrupt(); - } - - if (!cpus_empty(mask)) { - send_IPI_mask(mask, LOCAL_TIMER_VECTOR); - } -} - -void switch_ipi_to_APIC_timer(void *cpumask) -{ - cpumask_t mask = *(cpumask_t *)cpumask; - int cpu = smp_processor_id(); - - if (cpu_isset(cpu, mask) && - cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) { - cpu_clear(cpu, timer_interrupt_broadcast_ipi_mask); - enable_APIC_timer(); - } -} -EXPORT_SYMBOL(switch_ipi_to_APIC_timer); - -int setup_profiling_timer(unsigned int multiplier) -{ - return -EINVAL; -} - -void setup_APIC_extended_lvt(unsigned char lvt_off, unsigned char vector, - unsigned char msg_type, unsigned char mask) -{ - unsigned long reg = (lvt_off << 4) + K8_APIC_EXT_LVT_BASE; - unsigned int v = (mask << 16) | (msg_type << 8) | vector; - apic_write(reg, v); -} - -#undef APIC_DIVISOR - -/* - * Local timer interrupt handler. It does both profiling and - * process statistics/rescheduling. - * - * We do profiling in every local tick, statistics/rescheduling - * happen only every 'profiling multiplier' ticks. The default - * multiplier is 1 and it can be changed by writing the new multiplier - * value into /proc/profile. - */ - -void smp_local_timer_interrupt(void) -{ - profile_tick(CPU_PROFILING); -#ifdef CONFIG_SMP - update_process_times(user_mode(get_irq_regs())); -#endif - if (apic_runs_main_timer > 1 && smp_processor_id() == boot_cpu_id) - main_timer_handler(); - /* - * We take the 'long' return path, and there every subsystem - * grabs the appropriate locks (kernel lock/ irq lock). - * - * We might want to decouple profiling from the 'long path', - * and do the profiling totally in assembly. - * - * Currently this isn't too much of an issue (performance wise), - * we can take more than 100K local irqs per second on a 100 MHz P5. - */ -} - -/* - * Local APIC timer interrupt. This is the most natural way for doing - * local interrupts, but local timer interrupts can be emulated by - * broadcast interrupts too. [in case the hw doesn't support APIC timers] - * - * [ if a single-CPU system runs an SMP kernel then we call the local - * interrupt as well. Thus we cannot inline the local irq ... ] - */ -void smp_apic_timer_interrupt(struct pt_regs *regs) -{ - struct pt_regs *old_regs = set_irq_regs(regs); - - /* - * the NMI deadlock-detector uses this. - */ - add_pda(apic_timer_irqs, 1); - - /* - * NOTE! We'd better ACK the irq immediately, - * because timer handling can be slow. - */ - ack_APIC_irq(); - /* - * update_process_times() expects us to have done irq_enter(). - * Besides, if we don't timer interrupts ignore the global - * interrupt lock, which is the WrongThing (tm) to do. - */ - exit_idle(); - irq_enter(); - smp_local_timer_interrupt(); - irq_exit(); - set_irq_regs(old_regs); -} - -/* - * apic_is_clustered_box() -- Check if we can expect good TSC - * - * Thus far, the major user of this is IBM's Summit2 series: - * - * Clustered boxes may have unsynced TSC problems if they are - * multi-chassis. Use available data to take a good guess. - * If in doubt, go HPET. - */ -__cpuinit int apic_is_clustered_box(void) -{ - int i, clusters, zeros; - unsigned id; - DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS); - - bitmap_zero(clustermap, NUM_APIC_CLUSTERS); - - for (i = 0; i < NR_CPUS; i++) { - id = bios_cpu_apicid[i]; - if (id != BAD_APICID) - __set_bit(APIC_CLUSTERID(id), clustermap); - } - - /* Problem: Partially populated chassis may not have CPUs in some of - * the APIC clusters they have been allocated. Only present CPUs have - * bios_cpu_apicid entries, thus causing zeroes in the bitmap. Since - * clusters are allocated sequentially, count zeros only if they are - * bounded by ones. - */ - clusters = 0; - zeros = 0; - for (i = 0; i < NUM_APIC_CLUSTERS; i++) { - if (test_bit(i, clustermap)) { - clusters += 1 + zeros; - zeros = 0; - } else - ++zeros; - } - - /* - * If clusters > 2, then should be multi-chassis. - * May have to revisit this when multi-core + hyperthreaded CPUs come - * out, but AFAIK this will work even for them. - */ - return (clusters > 2); -} - -/* - * This interrupt should _never_ happen with our APIC/SMP architecture - */ -asmlinkage void smp_spurious_interrupt(void) -{ - unsigned int v; - exit_idle(); - irq_enter(); - /* - * Check if this really is a spurious interrupt and ACK it - * if it is a vectored one. Just in case... - * Spurious interrupts should not be ACKed. - */ - v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1)); - if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f))) - ack_APIC_irq(); - - irq_exit(); -} - -/* - * This interrupt should never happen with our APIC/SMP architecture - */ - -asmlinkage void smp_error_interrupt(void) -{ - unsigned int v, v1; - - exit_idle(); - irq_enter(); - /* First tickle the hardware, only then report what went on. -- REW */ - v = apic_read(APIC_ESR); - apic_write(APIC_ESR, 0); - v1 = apic_read(APIC_ESR); - ack_APIC_irq(); - atomic_inc(&irq_err_count); - - /* Here is what the APIC error bits mean: - 0: Send CS error - 1: Receive CS error - 2: Send accept error - 3: Receive accept error - 4: Reserved - 5: Send illegal vector - 6: Received illegal vector - 7: Illegal register address - */ - printk (KERN_DEBUG "APIC error on CPU%d: %02x(%02x)\n", - smp_processor_id(), v , v1); - irq_exit(); -} - -int disable_apic; - -/* - * This initializes the IO-APIC and APIC hardware if this is - * a UP kernel. - */ -int __init APIC_init_uniprocessor (void) -{ - if (disable_apic) { - printk(KERN_INFO "Apic disabled\n"); - return -1; - } - if (!cpu_has_apic) { - disable_apic = 1; - printk(KERN_INFO "Apic disabled by BIOS\n"); - return -1; - } - - verify_local_APIC(); - - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id); - apic_write(APIC_ID, SET_APIC_ID(boot_cpu_id)); - - setup_local_APIC(); - - if (smp_found_config && !skip_ioapic_setup && nr_ioapics) - setup_IO_APIC(); - else - nr_ioapics = 0; - setup_boot_APIC_clock(); - check_nmi_watchdog(); - return 0; -} - -static __init int setup_disableapic(char *str) -{ - disable_apic = 1; - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); - return 0; -} -early_param("disableapic", setup_disableapic); - -/* same as disableapic, for compatibility */ -static __init int setup_nolapic(char *str) -{ - return setup_disableapic(str); -} -early_param("nolapic", setup_nolapic); - -static int __init parse_lapic_timer_c2_ok(char *arg) -{ - local_apic_timer_c2_ok = 1; - return 0; -} -early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok); - -static __init int setup_noapictimer(char *str) -{ - if (str[0] != ' ' && str[0] != 0) - return 0; - disable_apic_timer = 1; - return 1; -} - -static __init int setup_apicmaintimer(char *str) -{ - apic_runs_main_timer = 1; - nohpet = 1; - return 1; -} -__setup("apicmaintimer", setup_apicmaintimer); - -static __init int setup_noapicmaintimer(char *str) -{ - apic_runs_main_timer = -1; - return 1; -} -__setup("noapicmaintimer", setup_noapicmaintimer); - -static __init int setup_apicpmtimer(char *s) -{ - apic_calibrate_pmtmr = 1; - notsc_setup(NULL); - return setup_apicmaintimer(NULL); -} -__setup("apicpmtimer", setup_apicpmtimer); - -__setup("noapictimer", setup_noapictimer); - diff --git a/arch/x86_64/kernel/asm-offsets.c b/arch/x86_64/kernel/asm-offsets.c deleted file mode 100644 index cfa82c899f4..00000000000 --- a/arch/x86_64/kernel/asm-offsets.c +++ /dev/null @@ -1,5 +0,0 @@ -#ifdef CONFIG_X86_32 -# include "asm-offsets_32.c" -#else -# include "asm-offsets_64.c" -#endif diff --git a/arch/x86_64/kernel/asm-offsets_64.c b/arch/x86_64/kernel/asm-offsets_64.c deleted file mode 100644 index 778953bc636..00000000000 --- a/arch/x86_64/kernel/asm-offsets_64.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Generate definitions needed by assembly language modules. - * This code generates raw asm output which is post-processed to extract - * and format the required data. - */ - -#include <linux/crypto.h> -#include <linux/sched.h> -#include <linux/stddef.h> -#include <linux/errno.h> -#include <linux/hardirq.h> -#include <linux/suspend.h> -#include <asm/pda.h> -#include <asm/processor.h> -#include <asm/segment.h> -#include <asm/thread_info.h> -#include <asm/ia32.h> - -#define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) - -#define BLANK() asm volatile("\n->" : : ) - -#define __NO_STUBS 1 -#undef __SYSCALL -#undef _ASM_X86_64_UNISTD_H_ -#define __SYSCALL(nr, sym) [nr] = 1, -static char syscalls[] = { -#include <asm/unistd.h> -}; - -int main(void) -{ -#define ENTRY(entry) DEFINE(tsk_ ## entry, offsetof(struct task_struct, entry)) - ENTRY(state); - ENTRY(flags); - ENTRY(thread); - ENTRY(pid); - BLANK(); -#undef ENTRY -#define ENTRY(entry) DEFINE(threadinfo_ ## entry, offsetof(struct thread_info, entry)) - ENTRY(flags); - ENTRY(addr_limit); - ENTRY(preempt_count); - ENTRY(status); - BLANK(); -#undef ENTRY -#define ENTRY(entry) DEFINE(pda_ ## entry, offsetof(struct x8664_pda, entry)) - ENTRY(kernelstack); - ENTRY(oldrsp); - ENTRY(pcurrent); - ENTRY(irqcount); - ENTRY(cpunumber); - ENTRY(irqstackptr); - ENTRY(data_offset); - BLANK(); -#undef ENTRY -#ifdef CONFIG_IA32_EMULATION -#define ENTRY(entry) DEFINE(IA32_SIGCONTEXT_ ## entry, offsetof(struct sigcontext_ia32, entry)) - ENTRY(eax); - ENTRY(ebx); - ENTRY(ecx); - ENTRY(edx); - ENTRY(esi); - ENTRY(edi); - ENTRY(ebp); - ENTRY(esp); - ENTRY(eip); - BLANK(); -#undef ENTRY - DEFINE(IA32_RT_SIGFRAME_sigcontext, - offsetof (struct rt_sigframe32, uc.uc_mcontext)); - BLANK(); -#endif - DEFINE(pbe_address, offsetof(struct pbe, address)); - DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address)); - DEFINE(pbe_next, offsetof(struct pbe, next)); - BLANK(); - DEFINE(TSS_ist, offsetof(struct tss_struct, ist)); - BLANK(); - DEFINE(crypto_tfm_ctx_offset, offsetof(struct crypto_tfm, __crt_ctx)); - BLANK(); - DEFINE(__NR_syscall_max, sizeof(syscalls) - 1); - return 0; -} diff --git a/arch/x86_64/kernel/audit_64.c b/arch/x86_64/kernel/audit_64.c deleted file mode 100644 index 06d3e5a14d9..00000000000 --- a/arch/x86_64/kernel/audit_64.c +++ /dev/null @@ -1,81 +0,0 @@ -#include <linux/init.h> -#include <linux/types.h> -#include <linux/audit.h> -#include <asm/unistd.h> - -static unsigned dir_class[] = { -#include <asm-generic/audit_dir_write.h> -~0U -}; - -static unsigned read_class[] = { -#include <asm-generic/audit_read.h> -~0U -}; - -static unsigned write_class[] = { -#include <asm-generic/audit_write.h> -~0U -}; - -static unsigned chattr_class[] = { -#include <asm-generic/audit_change_attr.h> -~0U -}; - -static unsigned signal_class[] = { -#include <asm-generic/audit_signal.h> -~0U -}; - -int audit_classify_arch(int arch) -{ -#ifdef CONFIG_IA32_EMULATION - if (arch == AUDIT_ARCH_I386) - return 1; -#endif - return 0; -} - -int audit_classify_syscall(int abi, unsigned syscall) -{ -#ifdef CONFIG_IA32_EMULATION - extern int ia32_classify_syscall(unsigned); - if (abi == AUDIT_ARCH_I386) - return ia32_classify_syscall(syscall); -#endif - switch(syscall) { - case __NR_open: - return 2; - case __NR_openat: - return 3; - case __NR_execve: - return 5; - default: - return 0; - } -} - -static int __init audit_classes_init(void) -{ -#ifdef CONFIG_IA32_EMULATION - extern __u32 ia32_dir_class[]; - extern __u32 ia32_write_class[]; - extern __u32 ia32_read_class[]; - extern __u32 ia32_chattr_class[]; - extern __u32 ia32_signal_class[]; - audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class); - audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class); - audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class); - audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class); - audit_register_class(AUDIT_CLASS_SIGNAL_32, ia32_signal_class); -#endif - audit_register_class(AUDIT_CLASS_WRITE, write_class); - audit_register_class(AUDIT_CLASS_READ, read_class); - audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class); - audit_register_class(AUDIT_CLASS_CHATTR, chattr_class); - audit_register_class(AUDIT_CLASS_SIGNAL, signal_class); - return 0; -} - -__initcall(audit_classes_init); diff --git a/arch/x86_64/kernel/bugs_64.c b/arch/x86_64/kernel/bugs_64.c deleted file mode 100644 index 4e5e9d364d6..00000000000 --- a/arch/x86_64/kernel/bugs_64.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/x86_64/kernel/bugs.c - * - * Copyright (C) 1994 Linus Torvalds - * Copyright (C) 2000 SuSE - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/alternative.h> -#include <asm/bugs.h> -#include <asm/processor.h> -#include <asm/mtrr.h> - -void __init check_bugs(void) -{ - identify_cpu(&boot_cpu_data); - mtrr_bp_init(); -#if !defined(CONFIG_SMP) - printk("CPU: "); - print_cpu_info(&boot_cpu_data); -#endif - alternative_instructions(); -} diff --git a/arch/x86_64/kernel/crash_64.c b/arch/x86_64/kernel/crash_64.c deleted file mode 100644 index 13432a1ae90..00000000000 --- a/arch/x86_64/kernel/crash_64.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Architecture specific (x86_64) functions for kexec based crash dumps. - * - * Created by: Hariprasad Nellitheertha (hari@in.ibm.com) - * - * Copyright (C) IBM Corporation, 2004. All rights reserved. - * - */ - -#include <linux/init.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/smp.h> -#include <linux/irq.h> -#include <linux/reboot.h> -#include <linux/kexec.h> -#include <linux/delay.h> -#include <linux/elf.h> -#include <linux/elfcore.h> -#include <linux/kdebug.h> - -#include <asm/processor.h> -#include <asm/hardirq.h> -#include <asm/nmi.h> -#include <asm/hw_irq.h> -#include <asm/mach_apic.h> - -/* This keeps a track of which one is crashing cpu. */ -static int crashing_cpu; - -#ifdef CONFIG_SMP -static atomic_t waiting_for_crash_ipi; - -static int crash_nmi_callback(struct notifier_block *self, - unsigned long val, void *data) -{ - struct pt_regs *regs; - int cpu; - - if (val != DIE_NMI_IPI) - return NOTIFY_OK; - - regs = ((struct die_args *)data)->regs; - cpu = raw_smp_processor_id(); - - /* - * Don't do anything if this handler is invoked on crashing cpu. - * Otherwise, system will completely hang. Crashing cpu can get - * an NMI if system was initially booted with nmi_watchdog parameter. - */ - if (cpu == crashing_cpu) - return NOTIFY_STOP; - local_irq_disable(); - - crash_save_cpu(regs, cpu); - disable_local_APIC(); - atomic_dec(&waiting_for_crash_ipi); - /* Assume hlt works */ - for(;;) - halt(); - - return 1; -} - -static void smp_send_nmi_allbutself(void) -{ - send_IPI_allbutself(NMI_VECTOR); -} - -/* - * This code is a best effort heuristic to get the - * other cpus to stop executing. So races with - * cpu hotplug shouldn't matter. - */ - -static struct notifier_block crash_nmi_nb = { - .notifier_call = crash_nmi_callback, -}; - -static void nmi_shootdown_cpus(void) -{ - unsigned long msecs; - - atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1); - if (register_die_notifier(&crash_nmi_nb)) - return; /* return what? */ - - /* - * Ensure the new callback function is set before sending - * out the NMI - */ - wmb(); - - smp_send_nmi_allbutself(); - - msecs = 1000; /* Wait at most a second for the other cpus to stop */ - while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) { - mdelay(1); - msecs--; - } - /* Leave the nmi callback set */ - disable_local_APIC(); -} -#else -static void nmi_shootdown_cpus(void) -{ - /* There are no cpus to shootdown */ -} -#endif - -void machine_crash_shutdown(struct pt_regs *regs) -{ - /* - * This function is only called after the system - * has panicked or is otherwise in a critical state. - * The minimum amount of code to allow a kexec'd kernel - * to run successfully needs to happen here. - * - * In practice this means shooting down the other cpus in - * an SMP system. - */ - /* The kernel is broken so disable interrupts */ - local_irq_disable(); - - /* Make a note of crashing cpu. Will be used in NMI callback.*/ - crashing_cpu = smp_processor_id(); - nmi_shootdown_cpus(); - - if(cpu_has_apic) - disable_local_APIC(); - - disable_IO_APIC(); - - crash_save_cpu(regs, smp_processor_id()); -} diff --git a/arch/x86_64/kernel/crash_dump_64.c b/arch/x86_64/kernel/crash_dump_64.c deleted file mode 100644 index 942deac4d43..00000000000 --- a/arch/x86_64/kernel/crash_dump_64.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * kernel/crash_dump.c - Memory preserving reboot related code. - * - * Created by: Hariprasad Nellitheertha (hari@in.ibm.com) - * Copyright (C) IBM Corporation, 2004. All rights reserved - */ - -#include <linux/errno.h> -#include <linux/crash_dump.h> - -#include <asm/uaccess.h> -#include <asm/io.h> - -/** - * copy_oldmem_page - copy one page from "oldmem" - * @pfn: page frame number to be copied - * @buf: target memory address for the copy; this can be in kernel address - * space or user address space (see @userbuf) - * @csize: number of bytes to copy - * @offset: offset in bytes into the page (based on pfn) to begin the copy - * @userbuf: if set, @buf is in user address space, use copy_to_user(), - * otherwise @buf is in kernel address space, use memcpy(). - * - * Copy a page from "oldmem". For this page, there is no pte mapped - * in the current kernel. We stitch up a pte, similar to kmap_atomic. - */ -ssize_t copy_oldmem_page(unsigned long pfn, char *buf, - size_t csize, unsigned long offset, int userbuf) -{ - void *vaddr; - - if (!csize) - return 0; - - vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE); - - if (userbuf) { - if (copy_to_user(buf, (vaddr + offset), csize)) { - iounmap(vaddr); - return -EFAULT; - } - } else - memcpy(buf, (vaddr + offset), csize); - - iounmap(vaddr); - return csize; -} diff --git a/arch/x86_64/kernel/e820_64.c b/arch/x86_64/kernel/e820_64.c deleted file mode 100644 index 0f4d5e209e9..00000000000 --- a/arch/x86_64/kernel/e820_64.c +++ /dev/null @@ -1,725 +0,0 @@ -/* - * Handle the memory map. - * The functions here do the job until bootmem takes over. - * - * Getting sanitize_e820_map() in sync with i386 version by applying change: - * - Provisions for empty E820 memory regions (reported by certain BIOSes). - * Alex Achenbach <xela@slit.de>, December 2002. - * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> - * - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/bootmem.h> -#include <linux/ioport.h> -#include <linux/string.h> -#include <linux/kexec.h> -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/suspend.h> -#include <linux/pfn.h> - -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/e820.h> -#include <asm/proto.h> -#include <asm/bootsetup.h> -#include <asm/sections.h> - -struct e820map e820; - -/* - * PFN of last memory page. - */ -unsigned long end_pfn; -EXPORT_SYMBOL(end_pfn); - -/* - * end_pfn only includes RAM, while end_pfn_map includes all e820 entries. - * The direct mapping extends to end_pfn_map, so that we can directly access - * apertures, ACPI and other tables without having to play with fixmaps. - */ -unsigned long end_pfn_map; - -/* - * Last pfn which the user wants to use. - */ -static unsigned long __initdata end_user_pfn = MAXMEM>>PAGE_SHIFT; - -extern struct resource code_resource, data_resource; - -/* Check for some hardcoded bad areas that early boot is not allowed to touch */ -static inline int bad_addr(unsigned long *addrp, unsigned long size) -{ - unsigned long addr = *addrp, last = addr + size; - - /* various gunk below that needed for SMP startup */ - if (addr < 0x8000) { - *addrp = PAGE_ALIGN(0x8000); - return 1; - } - - /* direct mapping tables of the kernel */ - if (last >= table_start<<PAGE_SHIFT && addr < table_end<<PAGE_SHIFT) { - *addrp = PAGE_ALIGN(table_end << PAGE_SHIFT); - return 1; - } - - /* initrd */ -#ifdef CONFIG_BLK_DEV_INITRD - if (LOADER_TYPE && INITRD_START && last >= INITRD_START && - addr < INITRD_START+INITRD_SIZE) { - *addrp = PAGE_ALIGN(INITRD_START + INITRD_SIZE); - return 1; - } -#endif - /* kernel code */ - if (last >= __pa_symbol(&_text) && addr < __pa_symbol(&_end)) { - *addrp = PAGE_ALIGN(__pa_symbol(&_end)); - return 1; - } - - if (last >= ebda_addr && addr < ebda_addr + ebda_size) { - *addrp = PAGE_ALIGN(ebda_addr + ebda_size); - return 1; - } - -#ifdef CONFIG_NUMA - /* NUMA memory to node map */ - if (last >= nodemap_addr && addr < nodemap_addr + nodemap_size) { - *addrp = nodemap_addr + nodemap_size; - return 1; - } -#endif - /* XXX ramdisk image here? */ - return 0; -} - -/* - * This function checks if any part of the range <start,end> is mapped - * with type. - */ -int -e820_any_mapped(unsigned long start, unsigned long end, unsigned type) -{ - int i; - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - if (type && ei->type != type) - continue; - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - return 1; - } - return 0; -} -EXPORT_SYMBOL_GPL(e820_any_mapped); - -/* - * This function checks if the entire range <start,end> is mapped with type. - * - * Note: this function only works correct if the e820 table is sorted and - * not-overlapping, which is the case - */ -int __init e820_all_mapped(unsigned long start, unsigned long end, unsigned type) -{ - int i; - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - if (type && ei->type != type) - continue; - /* is the region (part) in overlap with the current region ?*/ - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - - /* if the region is at the beginning of <start,end> we move - * start to the end of the region since it's ok until there - */ - if (ei->addr <= start) - start = ei->addr + ei->size; - /* if start is now at or beyond end, we're done, full coverage */ - if (start >= end) - return 1; /* we're done */ - } - return 0; -} - -/* - * Find a free area in a specific range. - */ -unsigned long __init find_e820_area(unsigned long start, unsigned long end, unsigned size) -{ - int i; - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - unsigned long addr = ei->addr, last; - if (ei->type != E820_RAM) - continue; - if (addr < start) - addr = start; - if (addr > ei->addr + ei->size) - continue; - while (bad_addr(&addr, size) && addr+size <= ei->addr+ei->size) - ; - last = PAGE_ALIGN(addr) + size; - if (last > ei->addr + ei->size) - continue; - if (last > end) - continue; - return addr; - } - return -1UL; -} - -/* - * Find the highest page frame number we have available - */ -unsigned long __init e820_end_of_ram(void) -{ - unsigned long end_pfn = 0; - end_pfn = find_max_pfn_with_active_regions(); - - if (end_pfn > end_pfn_map) - end_pfn_map = end_pfn; - if (end_pfn_map > MAXMEM>>PAGE_SHIFT) - end_pfn_map = MAXMEM>>PAGE_SHIFT; - if (end_pfn > end_user_pfn) - end_pfn = end_user_pfn; - if (end_pfn > end_pfn_map) - end_pfn = end_pfn_map; - - printk("end_pfn_map = %lu\n", end_pfn_map); - return end_pfn; -} - -/* - * Mark e820 reserved areas as busy for the resource manager. - */ -void __init e820_reserve_resources(void) -{ - int i; - for (i = 0; i < e820.nr_map; i++) { - struct resource *res; - res = alloc_bootmem_low(sizeof(struct resource)); - switch (e820.map[i].type) { - case E820_RAM: res->name = "System RAM"; break; - case E820_ACPI: res->name = "ACPI Tables"; break; - case E820_NVS: res->name = "ACPI Non-volatile Storage"; break; - default: res->name = "reserved"; - } - res->start = e820.map[i].addr; - res->end = res->start + e820.map[i].size - 1; - res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; - request_resource(&iomem_resource, res); - if (e820.map[i].type == E820_RAM) { - /* - * We don't know which RAM region contains kernel data, - * so we try it repeatedly and let the resource manager - * test it. - */ - request_resource(res, &code_resource); - request_resource(res, &data_resource); -#ifdef CONFIG_KEXEC - request_resource(res, &crashk_res); -#endif - } - } -} - -/* - * Find the ranges of physical addresses that do not correspond to - * e820 RAM areas and mark the corresponding pages as nosave for software - * suspend and suspend to RAM. - * - * This function requires the e820 map to be sorted and without any - * overlapping entries and assumes the first e820 area to be RAM. - */ -void __init e820_mark_nosave_regions(void) -{ - int i; - unsigned long paddr; - - paddr = round_down(e820.map[0].addr + e820.map[0].size, PAGE_SIZE); - for (i = 1; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (paddr < ei->addr) - register_nosave_region(PFN_DOWN(paddr), - PFN_UP(ei->addr)); - - paddr = round_down(ei->addr + ei->size, PAGE_SIZE); - if (ei->type != E820_RAM) - register_nosave_region(PFN_UP(ei->addr), - PFN_DOWN(paddr)); - - if (paddr >= (end_pfn << PAGE_SHIFT)) - break; - } -} - -/* - * Finds an active region in the address range from start_pfn to end_pfn and - * returns its range in ei_startpfn and ei_endpfn for the e820 entry. - */ -static int __init e820_find_active_region(const struct e820entry *ei, - unsigned long start_pfn, - unsigned long end_pfn, - unsigned long *ei_startpfn, - unsigned long *ei_endpfn) -{ - *ei_startpfn = round_up(ei->addr, PAGE_SIZE) >> PAGE_SHIFT; - *ei_endpfn = round_down(ei->addr + ei->size, PAGE_SIZE) >> PAGE_SHIFT; - - /* Skip map entries smaller than a page */ - if (*ei_startpfn >= *ei_endpfn) - return 0; - - /* Check if end_pfn_map should be updated */ - if (ei->type != E820_RAM && *ei_endpfn > end_pfn_map) - end_pfn_map = *ei_endpfn; - - /* Skip if map is outside the node */ - if (ei->type != E820_RAM || *ei_endpfn <= start_pfn || - *ei_startpfn >= end_pfn) - return 0; - - /* Check for overlaps */ - if (*ei_startpfn < start_pfn) - *ei_startpfn = start_pfn; - if (*ei_endpfn > end_pfn) - *ei_endpfn = end_pfn; - - /* Obey end_user_pfn to save on memmap */ - if (*ei_startpfn >= end_user_pfn) - return 0; - if (*ei_endpfn > end_user_pfn) - *ei_endpfn = end_user_pfn; - - return 1; -} - -/* Walk the e820 map and register active regions within a node */ -void __init -e820_register_active_regions(int nid, unsigned long start_pfn, - unsigned long end_pfn) -{ - unsigned long ei_startpfn; - unsigned long ei_endpfn; - int i; - - for (i = 0; i < e820.nr_map; i++) - if (e820_find_active_region(&e820.map[i], - start_pfn, end_pfn, - &ei_startpfn, &ei_endpfn)) - add_active_range(nid, ei_startpfn, ei_endpfn); -} - -/* - * Add a memory region to the kernel e820 map. - */ -void __init add_memory_region(unsigned long start, unsigned long size, int type) -{ - int x = e820.nr_map; - - if (x == E820MAX) { - printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); - return; - } - - e820.map[x].addr = start; - e820.map[x].size = size; - e820.map[x].type = type; - e820.nr_map++; -} - -/* - * Find the hole size (in bytes) in the memory range. - * @start: starting address of the memory range to scan - * @end: ending address of the memory range to scan - */ -unsigned long __init e820_hole_size(unsigned long start, unsigned long end) -{ - unsigned long start_pfn = start >> PAGE_SHIFT; - unsigned long end_pfn = end >> PAGE_SHIFT; - unsigned long ei_startpfn; - unsigned long ei_endpfn; - unsigned long ram = 0; - int i; - - for (i = 0; i < e820.nr_map; i++) { - if (e820_find_active_region(&e820.map[i], - start_pfn, end_pfn, - &ei_startpfn, &ei_endpfn)) - ram += ei_endpfn - ei_startpfn; - } - return end - start - (ram << PAGE_SHIFT); -} - -void __init e820_print_map(char *who) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - printk(KERN_INFO " %s: %016Lx - %016Lx ", who, - (unsigned long long) e820.map[i].addr, - (unsigned long long) (e820.map[i].addr + e820.map[i].size)); - switch (e820.map[i].type) { - case E820_RAM: printk("(usable)\n"); - break; - case E820_RESERVED: - printk("(reserved)\n"); - break; - case E820_ACPI: - printk("(ACPI data)\n"); - break; - case E820_NVS: - printk("(ACPI NVS)\n"); - break; - default: printk("type %u\n", e820.map[i].type); - break; - } - } -} - -/* - * Sanitize the BIOS e820 map. - * - * Some e820 responses include overlapping entries. The following - * replaces the original e820 map with a new one, removing overlaps. - * - */ -static int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map) -{ - struct change_member { - struct e820entry *pbios; /* pointer to original bios entry */ - unsigned long long addr; /* address for this change point */ - }; - static struct change_member change_point_list[2*E820MAX] __initdata; - static struct change_member *change_point[2*E820MAX] __initdata; - static struct e820entry *overlap_list[E820MAX] __initdata; - static struct e820entry new_bios[E820MAX] __initdata; - struct change_member *change_tmp; - unsigned long current_type, last_type; - unsigned long long last_addr; - int chgidx, still_changing; - int overlap_entries; - int new_bios_entry; - int old_nr, new_nr, chg_nr; - int i; - - /* - Visually we're performing the following (1,2,3,4 = memory types)... - - Sample memory map (w/overlaps): - ____22__________________ - ______________________4_ - ____1111________________ - _44_____________________ - 11111111________________ - ____________________33__ - ___________44___________ - __________33333_________ - ______________22________ - ___________________2222_ - _________111111111______ - _____________________11_ - _________________4______ - - Sanitized equivalent (no overlap): - 1_______________________ - _44_____________________ - ___1____________________ - ____22__________________ - ______11________________ - _________1______________ - __________3_____________ - ___________44___________ - _____________33_________ - _______________2________ - ________________1_______ - _________________4______ - ___________________2____ - ____________________33__ - ______________________4_ - */ - - /* if there's only one memory region, don't bother */ - if (*pnr_map < 2) - return -1; - - old_nr = *pnr_map; - - /* bail out if we find any unreasonable addresses in bios map */ - for (i=0; i<old_nr; i++) - if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr) - return -1; - - /* create pointers for initial change-point information (for sorting) */ - for (i=0; i < 2*old_nr; i++) - change_point[i] = &change_point_list[i]; - - /* record all known change-points (starting and ending addresses), - omitting those that are for empty memory regions */ - chgidx = 0; - for (i=0; i < old_nr; i++) { - if (biosmap[i].size != 0) { - change_point[chgidx]->addr = biosmap[i].addr; - change_point[chgidx++]->pbios = &biosmap[i]; - change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size; - change_point[chgidx++]->pbios = &biosmap[i]; - } - } - chg_nr = chgidx; - - /* sort change-point list by memory addresses (low -> high) */ - still_changing = 1; - while (still_changing) { - still_changing = 0; - for (i=1; i < chg_nr; i++) { - /* if <current_addr> > <last_addr>, swap */ - /* or, if current=<start_addr> & last=<end_addr>, swap */ - if ((change_point[i]->addr < change_point[i-1]->addr) || - ((change_point[i]->addr == change_point[i-1]->addr) && - (change_point[i]->addr == change_point[i]->pbios->addr) && - (change_point[i-1]->addr != change_point[i-1]->pbios->addr)) - ) - { - change_tmp = change_point[i]; - change_point[i] = change_point[i-1]; - change_point[i-1] = change_tmp; - still_changing=1; - } - } - } - - /* create a new bios memory map, removing overlaps */ - overlap_entries=0; /* number of entries in the overlap table */ - new_bios_entry=0; /* index for creating new bios map entries */ - last_type = 0; /* start with undefined memory type */ - last_addr = 0; /* start with 0 as last starting address */ - /* loop through change-points, determining affect on the new bios map */ - for (chgidx=0; chgidx < chg_nr; chgidx++) - { - /* keep track of all overlapping bios entries */ - if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr) - { - /* add map entry to overlap list (> 1 entry implies an overlap) */ - overlap_list[overlap_entries++]=change_point[chgidx]->pbios; - } - else - { - /* remove entry from list (order independent, so swap with last) */ - for (i=0; i<overlap_entries; i++) - { - if (overlap_list[i] == change_point[chgidx]->pbios) - overlap_list[i] = overlap_list[overlap_entries-1]; - } - overlap_entries--; - } - /* if there are overlapping entries, decide which "type" to use */ - /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */ - current_type = 0; - for (i=0; i<overlap_entries; i++) - if (overlap_list[i]->type > current_type) - current_type = overlap_list[i]->type; - /* continue building up new bios map based on this information */ - if (current_type != last_type) { - if (last_type != 0) { - new_bios[new_bios_entry].size = - change_point[chgidx]->addr - last_addr; - /* move forward only if the new size was non-zero */ - if (new_bios[new_bios_entry].size != 0) - if (++new_bios_entry >= E820MAX) - break; /* no more space left for new bios entries */ - } - if (current_type != 0) { - new_bios[new_bios_entry].addr = change_point[chgidx]->addr; - new_bios[new_bios_entry].type = current_type; - last_addr=change_point[chgidx]->addr; - } - last_type = current_type; - } - } - new_nr = new_bios_entry; /* retain count for new bios entries */ - - /* copy new bios mapping into original location */ - memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry)); - *pnr_map = new_nr; - - return 0; -} - -/* - * Copy the BIOS e820 map into a safe place. - * - * Sanity-check it while we're at it.. - * - * If we're lucky and live on a modern system, the setup code - * will have given us a memory map that we can use to properly - * set up memory. If we aren't, we'll fake a memory map. - */ -static int __init copy_e820_map(struct e820entry * biosmap, int nr_map) -{ - /* Only one memory region (or negative)? Ignore it */ - if (nr_map < 2) - return -1; - - do { - unsigned long start = biosmap->addr; - unsigned long size = biosmap->size; - unsigned long end = start + size; - unsigned long type = biosmap->type; - - /* Overflow in 64 bits? Ignore the memory map. */ - if (start > end) - return -1; - - add_memory_region(start, size, type); - } while (biosmap++,--nr_map); - return 0; -} - -void early_panic(char *msg) -{ - early_printk(msg); - panic(msg); -} - -void __init setup_memory_region(void) -{ - /* - * Try to copy the BIOS-supplied E820-map. - * - * Otherwise fake a memory map; one section from 0k->640k, - * the next section from 1mb->appropriate_mem_k - */ - sanitize_e820_map(E820_MAP, &E820_MAP_NR); - if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) - early_panic("Cannot find a valid memory map"); - printk(KERN_INFO "BIOS-provided physical RAM map:\n"); - e820_print_map("BIOS-e820"); -} - -static int __init parse_memopt(char *p) -{ - if (!p) - return -EINVAL; - end_user_pfn = memparse(p, &p); - end_user_pfn >>= PAGE_SHIFT; - return 0; -} -early_param("mem", parse_memopt); - -static int userdef __initdata; - -static int __init parse_memmap_opt(char *p) -{ - char *oldp; - unsigned long long start_at, mem_size; - - if (!strcmp(p, "exactmap")) { -#ifdef CONFIG_CRASH_DUMP - /* If we are doing a crash dump, we - * still need to know the real mem - * size before original memory map is - * reset. - */ - e820_register_active_regions(0, 0, -1UL); - saved_max_pfn = e820_end_of_ram(); - remove_all_active_ranges(); -#endif - end_pfn_map = 0; - e820.nr_map = 0; - userdef = 1; - return 0; - } - - oldp = p; - mem_size = memparse(p, &p); - if (p == oldp) - return -EINVAL; - if (*p == '@') { - start_at = memparse(p+1, &p); - add_memory_region(start_at, mem_size, E820_RAM); - } else if (*p == '#') { - start_at = memparse(p+1, &p); - add_memory_region(start_at, mem_size, E820_ACPI); - } else if (*p == '$') { - start_at = memparse(p+1, &p); - add_memory_region(start_at, mem_size, E820_RESERVED); - } else { - end_user_pfn = (mem_size >> PAGE_SHIFT); - } - return *p == '\0' ? 0 : -EINVAL; -} -early_param("memmap", parse_memmap_opt); - -void __init finish_e820_parsing(void) -{ - if (userdef) { - printk(KERN_INFO "user-defined physical RAM map:\n"); - e820_print_map("user"); - } -} - -unsigned long pci_mem_start = 0xaeedbabe; -EXPORT_SYMBOL(pci_mem_start); - -/* - * Search for the biggest gap in the low 32 bits of the e820 - * memory space. We pass this space to PCI to assign MMIO resources - * for hotplug or unconfigured devices in. - * Hopefully the BIOS let enough space left. - */ -__init void e820_setup_gap(void) -{ - unsigned long gapstart, gapsize, round; - unsigned long last; - int i; - int found = 0; - - last = 0x100000000ull; - gapstart = 0x10000000; - gapsize = 0x400000; - i = e820.nr_map; - while (--i >= 0) { - unsigned long long start = e820.map[i].addr; - unsigned long long end = start + e820.map[i].size; - - /* - * Since "last" is at most 4GB, we know we'll - * fit in 32 bits if this condition is true - */ - if (last > end) { - unsigned long gap = last - end; - - if (gap > gapsize) { - gapsize = gap; - gapstart = end; - found = 1; - } - } - if (start < last) - last = start; - } - - if (!found) { - gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024; - printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit address range\n" - KERN_ERR "PCI: Unassigned devices with 32bit resource registers may break!\n"); - } - - /* - * See how much we want to round up: start off with - * rounding to the next 1MB area. - */ - round = 0x100000; - while ((gapsize >> 4) > round) - round += round; - /* Fun with two's complement */ - pci_mem_start = (gapstart + round) & -round; - - printk(KERN_INFO "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n", - pci_mem_start, gapstart, gapsize); -} diff --git a/arch/x86_64/kernel/early-quirks_64.c b/arch/x86_64/kernel/early-quirks_64.c deleted file mode 100644 index 13aa4fd728f..00000000000 --- a/arch/x86_64/kernel/early-quirks_64.c +++ /dev/null @@ -1,127 +0,0 @@ -/* Various workarounds for chipset bugs. - This code runs very early and can't use the regular PCI subsystem - The entries are keyed to PCI bridges which usually identify chipsets - uniquely. - This is only for whole classes of chipsets with specific problems which - need early invasive action (e.g. before the timers are initialized). - Most PCI device specific workarounds can be done later and should be - in standard PCI quirks - Mainboard specific bugs should be handled by DMI entries. - CPU specific bugs in setup.c */ - -#include <linux/pci.h> -#include <linux/acpi.h> -#include <linux/pci_ids.h> -#include <asm/pci-direct.h> -#include <asm/proto.h> -#include <asm/iommu.h> -#include <asm/dma.h> - -static void __init via_bugs(void) -{ -#ifdef CONFIG_IOMMU - if ((end_pfn > MAX_DMA32_PFN || force_iommu) && - !iommu_aperture_allowed) { - printk(KERN_INFO - "Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed\n"); - iommu_aperture_disabled = 1; - } -#endif -} - -#ifdef CONFIG_ACPI - -static int __init nvidia_hpet_check(struct acpi_table_header *header) -{ - return 0; -} -#endif - -static void __init nvidia_bugs(void) -{ -#ifdef CONFIG_ACPI - /* - * All timer overrides on Nvidia are - * wrong unless HPET is enabled. - * Unfortunately that's not true on many Asus boards. - * We don't know yet how to detect this automatically, but - * at least allow a command line override. - */ - if (acpi_use_timer_override) - return; - - if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) { - acpi_skip_timer_override = 1; - printk(KERN_INFO "Nvidia board " - "detected. Ignoring ACPI " - "timer override.\n"); - printk(KERN_INFO "If you got timer trouble " - "try acpi_use_timer_override\n"); - } -#endif - /* RED-PEN skip them on mptables too? */ - -} - -static void __init ati_bugs(void) -{ - if (timer_over_8254 == 1) { - timer_over_8254 = 0; - printk(KERN_INFO - "ATI board detected. Disabling timer routing over 8254.\n"); - } -} - -struct chipset { - u16 vendor; - void (*f)(void); -}; - -static struct chipset early_qrk[] __initdata = { - { PCI_VENDOR_ID_NVIDIA, nvidia_bugs }, - { PCI_VENDOR_ID_VIA, via_bugs }, - { PCI_VENDOR_ID_ATI, ati_bugs }, - {} -}; - -void __init early_quirks(void) -{ - int num, slot, func; - - if (!early_pci_allowed()) - return; - - /* Poor man's PCI discovery */ - for (num = 0; num < 32; num++) { - for (slot = 0; slot < 32; slot++) { - for (func = 0; func < 8; func++) { - u32 class; - u32 vendor; - u8 type; - int i; - class = read_pci_config(num,slot,func, - PCI_CLASS_REVISION); - if (class == 0xffffffff) - break; - - if ((class >> 16) != PCI_CLASS_BRIDGE_PCI) - continue; - - vendor = read_pci_config(num, slot, func, - PCI_VENDOR_ID); - vendor &= 0xffff; - - for (i = 0; early_qrk[i].f; i++) - if (early_qrk[i].vendor == vendor) { - early_qrk[i].f(); - return; - } - - type = read_pci_config_byte(num, slot, func, - PCI_HEADER_TYPE); - if (!(type & 0x80)) - break; - } - } - } -} diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c deleted file mode 100644 index fd9aff3f389..00000000000 --- a/arch/x86_64/kernel/early_printk.c +++ /dev/null @@ -1,259 +0,0 @@ -#include <linux/console.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/screen_info.h> -#include <asm/io.h> -#include <asm/processor.h> -#include <asm/fcntl.h> -#include <xen/hvc-console.h> - -/* Simple VGA output */ - -#ifdef __i386__ -#include <asm/setup.h> -#else -#include <asm/bootsetup.h> -#endif -#define VGABASE (__ISA_IO_base + 0xb8000) - -static int max_ypos = 25, max_xpos = 80; -static int current_ypos = 25, current_xpos = 0; - -static void early_vga_write(struct console *con, const char *str, unsigned n) -{ - char c; - int i, k, j; - - while ((c = *str++) != '\0' && n-- > 0) { - if (current_ypos >= max_ypos) { - /* scroll 1 line up */ - for (k = 1, j = 0; k < max_ypos; k++, j++) { - for (i = 0; i < max_xpos; i++) { - writew(readw(VGABASE+2*(max_xpos*k+i)), - VGABASE + 2*(max_xpos*j + i)); - } - } - for (i = 0; i < max_xpos; i++) - writew(0x720, VGABASE + 2*(max_xpos*j + i)); - current_ypos = max_ypos-1; - } - if (c == '\n') { - current_xpos = 0; - current_ypos++; - } else if (c != '\r') { - writew(((0x7 << 8) | (unsigned short) c), - VGABASE + 2*(max_xpos*current_ypos + - current_xpos++)); - if (current_xpos >= max_xpos) { - current_xpos = 0; - current_ypos++; - } - } - } -} - -static struct console early_vga_console = { - .name = "earlyvga", - .write = early_vga_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -/* Serial functions loosely based on a similar package from Klaus P. Gerlicher */ - -static int early_serial_base = 0x3f8; /* ttyS0 */ - -#define XMTRDY 0x20 - -#define DLAB 0x80 - -#define TXR 0 /* Transmit register (WRITE) */ -#define RXR 0 /* Receive register (READ) */ -#define IER 1 /* Interrupt Enable */ -#define IIR 2 /* Interrupt ID */ -#define FCR 2 /* FIFO control */ -#define LCR 3 /* Line control */ -#define MCR 4 /* Modem control */ -#define LSR 5 /* Line Status */ -#define MSR 6 /* Modem Status */ -#define DLL 0 /* Divisor Latch Low */ -#define DLH 1 /* Divisor latch High */ - -static int early_serial_putc(unsigned char ch) -{ - unsigned timeout = 0xffff; - while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout) - cpu_relax(); - outb(ch, early_serial_base + TXR); - return timeout ? 0 : -1; -} - -static void early_serial_write(struct console *con, const char *s, unsigned n) -{ - while (*s && n-- > 0) { - if (*s == '\n') - early_serial_putc('\r'); - early_serial_putc(*s); - s++; - } -} - -#define DEFAULT_BAUD 9600 - -static __init void early_serial_init(char *s) -{ - unsigned char c; - unsigned divisor; - unsigned baud = DEFAULT_BAUD; - char *e; - - if (*s == ',') - ++s; - - if (*s) { - unsigned port; - if (!strncmp(s,"0x",2)) { - early_serial_base = simple_strtoul(s, &e, 16); - } else { - static int bases[] = { 0x3f8, 0x2f8 }; - - if (!strncmp(s,"ttyS",4)) - s += 4; - port = simple_strtoul(s, &e, 10); - if (port > 1 || s == e) - port = 0; - early_serial_base = bases[port]; - } - s += strcspn(s, ","); - if (*s == ',') - s++; - } - - outb(0x3, early_serial_base + LCR); /* 8n1 */ - outb(0, early_serial_base + IER); /* no interrupt */ - outb(0, early_serial_base + FCR); /* no fifo */ - outb(0x3, early_serial_base + MCR); /* DTR + RTS */ - - if (*s) { - baud = simple_strtoul(s, &e, 0); - if (baud == 0 || s == e) - baud = DEFAULT_BAUD; - } - - divisor = 115200 / baud; - c = inb(early_serial_base + LCR); - outb(c | DLAB, early_serial_base + LCR); - outb(divisor & 0xff, early_serial_base + DLL); - outb((divisor >> 8) & 0xff, early_serial_base + DLH); - outb(c & ~DLAB, early_serial_base + LCR); -} - -static struct console early_serial_console = { - .name = "earlyser", - .write = early_serial_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -/* Console interface to a host file on AMD's SimNow! */ - -static int simnow_fd; - -enum { - MAGIC1 = 0xBACCD00A, - MAGIC2 = 0xCA110000, - XOPEN = 5, - XWRITE = 4, -}; - -static noinline long simnow(long cmd, long a, long b, long c) -{ - long ret; - asm volatile("cpuid" : - "=a" (ret) : - "b" (a), "c" (b), "d" (c), "0" (MAGIC1), "D" (cmd + MAGIC2)); - return ret; -} - -static void __init simnow_init(char *str) -{ - char *fn = "klog"; - if (*str == '=') - fn = ++str; - /* error ignored */ - simnow_fd = simnow(XOPEN, (unsigned long)fn, O_WRONLY|O_APPEND|O_CREAT, 0644); -} - -static void simnow_write(struct console *con, const char *s, unsigned n) -{ - simnow(XWRITE, simnow_fd, (unsigned long)s, n); -} - -static struct console simnow_console = { - .name = "simnow", - .write = simnow_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -/* Direct interface for emergencies */ -struct console *early_console = &early_vga_console; -static int early_console_initialized = 0; - -void early_printk(const char *fmt, ...) -{ - char buf[512]; - int n; - va_list ap; - - va_start(ap,fmt); - n = vscnprintf(buf,512,fmt,ap); - early_console->write(early_console,buf,n); - va_end(ap); -} - -static int __initdata keep_early; - -static int __init setup_early_printk(char *buf) -{ - if (!buf) - return 0; - - if (early_console_initialized) - return 0; - early_console_initialized = 1; - - if (strstr(buf, "keep")) - keep_early = 1; - - if (!strncmp(buf, "serial", 6)) { - early_serial_init(buf + 6); - early_console = &early_serial_console; - } else if (!strncmp(buf, "ttyS", 4)) { - early_serial_init(buf); - early_console = &early_serial_console; - } else if (!strncmp(buf, "vga", 3) - && SCREEN_INFO.orig_video_isVGA == 1) { - max_xpos = SCREEN_INFO.orig_video_cols; - max_ypos = SCREEN_INFO.orig_video_lines; - current_ypos = SCREEN_INFO.orig_y; - early_console = &early_vga_console; - } else if (!strncmp(buf, "simnow", 6)) { - simnow_init(buf + 6); - early_console = &simnow_console; - keep_early = 1; -#ifdef CONFIG_HVC_XEN - } else if (!strncmp(buf, "xen", 3)) { - early_console = &xenboot_console; -#endif - } - - if (keep_early) - early_console->flags &= ~CON_BOOT; - else - early_console->flags |= CON_BOOT; - register_console(early_console); - return 0; -} -early_param("earlyprintk", setup_early_printk); diff --git a/arch/x86_64/kernel/entry_64.S b/arch/x86_64/kernel/entry_64.S deleted file mode 100644 index 1d232e5f565..00000000000 --- a/arch/x86_64/kernel/entry_64.S +++ /dev/null @@ -1,1172 +0,0 @@ -/* - * linux/arch/x86_64/entry.S - * - * Copyright (C) 1991, 1992 Linus Torvalds - * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs - * Copyright (C) 2000 Pavel Machek <pavel@suse.cz> - */ - -/* - * entry.S contains the system-call and fault low-level handling routines. - * - * NOTE: This code handles signal-recognition, which happens every time - * after an interrupt and after each system call. - * - * Normal syscalls and interrupts don't save a full stack frame, this is - * only done for syscall tracing, signals or fork/exec et.al. - * - * A note on terminology: - * - top of stack: Architecture defined interrupt frame from SS to RIP - * at the top of the kernel process stack. - * - partial stack frame: partially saved registers upto R11. - * - full stack frame: Like partial stack frame, but all register saved. - * - * Some macro usage: - * - CFI macros are used to generate dwarf2 unwind information for better - * backtraces. They don't change any code. - * - SAVE_ALL/RESTORE_ALL - Save/restore all registers - * - SAVE_ARGS/RESTORE_ARGS - Save/restore registers that C functions modify. - * There are unfortunately lots of special cases where some registers - * not touched. The macro is a big mess that should be cleaned up. - * - SAVE_REST/RESTORE_REST - Handle the registers not saved by SAVE_ARGS. - * Gives a full stack frame. - * - ENTRY/END Define functions in the symbol table. - * - FIXUP_TOP_OF_STACK/RESTORE_TOP_OF_STACK - Fix up the hardware stack - * frame that is otherwise undefined after a SYSCALL - * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging. - * - errorentry/paranoidentry/zeroentry - Define exception entry points. - */ - -#include <linux/linkage.h> -#include <asm/segment.h> -#include <asm/cache.h> -#include <asm/errno.h> -#include <asm/dwarf2.h> -#include <asm/calling.h> -#include <asm/asm-offsets.h> -#include <asm/msr.h> -#include <asm/unistd.h> -#include <asm/thread_info.h> -#include <asm/hw_irq.h> -#include <asm/page.h> -#include <asm/irqflags.h> - - .code64 - -#ifndef CONFIG_PREEMPT -#define retint_kernel retint_restore_args -#endif - - -.macro TRACE_IRQS_IRETQ offset=ARGOFFSET -#ifdef CONFIG_TRACE_IRQFLAGS - bt $9,EFLAGS-\offset(%rsp) /* interrupts off? */ - jnc 1f - TRACE_IRQS_ON -1: -#endif -.endm - -/* - * C code is not supposed to know about undefined top of stack. Every time - * a C function with an pt_regs argument is called from the SYSCALL based - * fast path FIXUP_TOP_OF_STACK is needed. - * RESTORE_TOP_OF_STACK syncs the syscall state after any possible ptregs - * manipulation. - */ - - /* %rsp:at FRAMEEND */ - .macro FIXUP_TOP_OF_STACK tmp - movq %gs:pda_oldrsp,\tmp - movq \tmp,RSP(%rsp) - movq $__USER_DS,SS(%rsp) - movq $__USER_CS,CS(%rsp) - movq $-1,RCX(%rsp) - movq R11(%rsp),\tmp /* get eflags */ - movq \tmp,EFLAGS(%rsp) - .endm - - .macro RESTORE_TOP_OF_STACK tmp,offset=0 - movq RSP-\offset(%rsp),\tmp - movq \tmp,%gs:pda_oldrsp - movq EFLAGS-\offset(%rsp),\tmp - movq \tmp,R11-\offset(%rsp) - .endm - - .macro FAKE_STACK_FRAME child_rip - /* push in order ss, rsp, eflags, cs, rip */ - xorl %eax, %eax - pushq %rax /* ss */ - CFI_ADJUST_CFA_OFFSET 8 - /*CFI_REL_OFFSET ss,0*/ - pushq %rax /* rsp */ - CFI_ADJUST_CFA_OFFSET 8 - CFI_REL_OFFSET rsp,0 - pushq $(1<<9) /* eflags - interrupts on */ - CFI_ADJUST_CFA_OFFSET 8 - /*CFI_REL_OFFSET rflags,0*/ - pushq $__KERNEL_CS /* cs */ - CFI_ADJUST_CFA_OFFSET 8 - /*CFI_REL_OFFSET cs,0*/ - pushq \child_rip /* rip */ - CFI_ADJUST_CFA_OFFSET 8 - CFI_REL_OFFSET rip,0 - pushq %rax /* orig rax */ - CFI_ADJUST_CFA_OFFSET 8 - .endm - - .macro UNFAKE_STACK_FRAME - addq $8*6, %rsp - CFI_ADJUST_CFA_OFFSET -(6*8) - .endm - - .macro CFI_DEFAULT_STACK start=1 - .if \start - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,SS+8 - .else - CFI_DEF_CFA_OFFSET SS+8 - .endif - CFI_REL_OFFSET r15,R15 - CFI_REL_OFFSET r14,R14 - CFI_REL_OFFSET r13,R13 - CFI_REL_OFFSET r12,R12 - CFI_REL_OFFSET rbp,RBP - CFI_REL_OFFSET rbx,RBX - CFI_REL_OFFSET r11,R11 - CFI_REL_OFFSET r10,R10 - CFI_REL_OFFSET r9,R9 - CFI_REL_OFFSET r8,R8 - CFI_REL_OFFSET rax,RAX - CFI_REL_OFFSET rcx,RCX - CFI_REL_OFFSET rdx,RDX - CFI_REL_OFFSET rsi,RSI - CFI_REL_OFFSET rdi,RDI - CFI_REL_OFFSET rip,RIP - /*CFI_REL_OFFSET cs,CS*/ - /*CFI_REL_OFFSET rflags,EFLAGS*/ - CFI_REL_OFFSET rsp,RSP - /*CFI_REL_OFFSET ss,SS*/ - .endm -/* - * A newly forked process directly context switches into this. - */ -/* rdi: prev */ -ENTRY(ret_from_fork) - CFI_DEFAULT_STACK - push kernel_eflags(%rip) - CFI_ADJUST_CFA_OFFSET 4 - popf # reset kernel eflags - CFI_ADJUST_CFA_OFFSET -4 - call schedule_tail - GET_THREAD_INFO(%rcx) - testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),threadinfo_flags(%rcx) - jnz rff_trace -rff_action: - RESTORE_REST - testl $3,CS-ARGOFFSET(%rsp) # from kernel_thread? - je int_ret_from_sys_call - testl $_TIF_IA32,threadinfo_flags(%rcx) - jnz int_ret_from_sys_call - RESTORE_TOP_OF_STACK %rdi,ARGOFFSET - jmp ret_from_sys_call -rff_trace: - movq %rsp,%rdi - call syscall_trace_leave - GET_THREAD_INFO(%rcx) - jmp rff_action - CFI_ENDPROC -END(ret_from_fork) - -/* - * System call entry. Upto 6 arguments in registers are supported. - * - * SYSCALL does not save anything on the stack and does not change the - * stack pointer. - */ - -/* - * Register setup: - * rax system call number - * rdi arg0 - * rcx return address for syscall/sysret, C arg3 - * rsi arg1 - * rdx arg2 - * r10 arg3 (--> moved to rcx for C) - * r8 arg4 - * r9 arg5 - * r11 eflags for syscall/sysret, temporary for C - * r12-r15,rbp,rbx saved by C code, not touched. - * - * Interrupts are off on entry. - * Only called from user space. - * - * XXX if we had a free scratch register we could save the RSP into the stack frame - * and report it properly in ps. Unfortunately we haven't. - * - * When user can change the frames always force IRET. That is because - * it deals with uncanonical addresses better. SYSRET has trouble - * with them due to bugs in both AMD and Intel CPUs. - */ - -ENTRY(system_call) - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,PDA_STACKOFFSET - CFI_REGISTER rip,rcx - /*CFI_REGISTER rflags,r11*/ - swapgs - movq %rsp,%gs:pda_oldrsp - movq %gs:pda_kernelstack,%rsp - /* - * No need to follow this irqs off/on section - it's straight - * and short: - */ - sti - SAVE_ARGS 8,1 - movq %rax,ORIG_RAX-ARGOFFSET(%rsp) - movq %rcx,RIP-ARGOFFSET(%rsp) - CFI_REL_OFFSET rip,RIP-ARGOFFSET - GET_THREAD_INFO(%rcx) - testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%rcx) - jnz tracesys - cmpq $__NR_syscall_max,%rax - ja badsys - movq %r10,%rcx - call *sys_call_table(,%rax,8) # XXX: rip relative - movq %rax,RAX-ARGOFFSET(%rsp) -/* - * Syscall return path ending with SYSRET (fast path) - * Has incomplete stack frame and undefined top of stack. - */ -ret_from_sys_call: - movl $_TIF_ALLWORK_MASK,%edi - /* edi: flagmask */ -sysret_check: - GET_THREAD_INFO(%rcx) - cli - TRACE_IRQS_OFF - movl threadinfo_flags(%rcx),%edx - andl %edi,%edx - jnz sysret_careful - CFI_REMEMBER_STATE - /* - * sysretq will re-enable interrupts: - */ - TRACE_IRQS_ON - movq RIP-ARGOFFSET(%rsp),%rcx - CFI_REGISTER rip,rcx - RESTORE_ARGS 0,-ARG_SKIP,1 - /*CFI_REGISTER rflags,r11*/ - movq %gs:pda_oldrsp,%rsp - swapgs - sysretq - - CFI_RESTORE_STATE - /* Handle reschedules */ - /* edx: work, edi: workmask */ -sysret_careful: - bt $TIF_NEED_RESCHED,%edx - jnc sysret_signal - TRACE_IRQS_ON - sti - pushq %rdi - CFI_ADJUST_CFA_OFFSET 8 - call schedule - popq %rdi - CFI_ADJUST_CFA_OFFSET -8 - jmp sysret_check - - /* Handle a signal */ -sysret_signal: - TRACE_IRQS_ON - sti - testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx - jz 1f - - /* Really a signal */ - /* edx: work flags (arg3) */ - leaq do_notify_resume(%rip),%rax - leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1 - xorl %esi,%esi # oldset -> arg2 - call ptregscall_common -1: movl $_TIF_NEED_RESCHED,%edi - /* Use IRET because user could have changed frame. This - works because ptregscall_common has called FIXUP_TOP_OF_STACK. */ - cli - TRACE_IRQS_OFF - jmp int_with_check - -badsys: - movq $-ENOSYS,RAX-ARGOFFSET(%rsp) - jmp ret_from_sys_call - - /* Do syscall tracing */ -tracesys: - SAVE_REST - movq $-ENOSYS,RAX(%rsp) - FIXUP_TOP_OF_STACK %rdi - movq %rsp,%rdi - call syscall_trace_enter - LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */ - RESTORE_REST - cmpq $__NR_syscall_max,%rax - movq $-ENOSYS,%rcx - cmova %rcx,%rax - ja 1f - movq %r10,%rcx /* fixup for C */ - call *sys_call_table(,%rax,8) -1: movq %rax,RAX-ARGOFFSET(%rsp) - /* Use IRET because user could have changed frame */ - -/* - * Syscall return path ending with IRET. - * Has correct top of stack, but partial stack frame. - */ - .globl int_ret_from_sys_call -int_ret_from_sys_call: - cli - TRACE_IRQS_OFF - testl $3,CS-ARGOFFSET(%rsp) - je retint_restore_args - movl $_TIF_ALLWORK_MASK,%edi - /* edi: mask to check */ -int_with_check: - GET_THREAD_INFO(%rcx) - movl threadinfo_flags(%rcx),%edx - andl %edi,%edx - jnz int_careful - andl $~TS_COMPAT,threadinfo_status(%rcx) - jmp retint_swapgs - - /* Either reschedule or signal or syscall exit tracking needed. */ - /* First do a reschedule test. */ - /* edx: work, edi: workmask */ -int_careful: - bt $TIF_NEED_RESCHED,%edx - jnc int_very_careful - TRACE_IRQS_ON - sti - pushq %rdi - CFI_ADJUST_CFA_OFFSET 8 - call schedule - popq %rdi - CFI_ADJUST_CFA_OFFSET -8 - cli - TRACE_IRQS_OFF - jmp int_with_check - - /* handle signals and tracing -- both require a full stack frame */ -int_very_careful: - TRACE_IRQS_ON - sti - SAVE_REST - /* Check for syscall exit trace */ - testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx - jz int_signal - pushq %rdi - CFI_ADJUST_CFA_OFFSET 8 - leaq 8(%rsp),%rdi # &ptregs -> arg1 - call syscall_trace_leave - popq %rdi - CFI_ADJUST_CFA_OFFSET -8 - andl $~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edi - jmp int_restore_rest - -int_signal: - testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx - jz 1f - movq %rsp,%rdi # &ptregs -> arg1 - xorl %esi,%esi # oldset -> arg2 - call do_notify_resume -1: movl $_TIF_NEED_RESCHED,%edi -int_restore_rest: - RESTORE_REST - cli - TRACE_IRQS_OFF - jmp int_with_check - CFI_ENDPROC -END(system_call) - -/* - * Certain special system calls that need to save a complete full stack frame. - */ - - .macro PTREGSCALL label,func,arg - .globl \label -\label: - leaq \func(%rip),%rax - leaq -ARGOFFSET+8(%rsp),\arg /* 8 for return address */ - jmp ptregscall_common -END(\label) - .endm - - CFI_STARTPROC - - PTREGSCALL stub_clone, sys_clone, %r8 - PTREGSCALL stub_fork, sys_fork, %rdi - PTREGSCALL stub_vfork, sys_vfork, %rdi - PTREGSCALL stub_rt_sigsuspend, sys_rt_sigsuspend, %rdx - PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx - PTREGSCALL stub_iopl, sys_iopl, %rsi - -ENTRY(ptregscall_common) - popq %r11 - CFI_ADJUST_CFA_OFFSET -8 - CFI_REGISTER rip, r11 - SAVE_REST - movq %r11, %r15 - CFI_REGISTER rip, r15 - FIXUP_TOP_OF_STACK %r11 - call *%rax - RESTORE_TOP_OF_STACK %r11 - movq %r15, %r11 - CFI_REGISTER rip, r11 - RESTORE_REST - pushq %r11 - CFI_ADJUST_CFA_OFFSET 8 - CFI_REL_OFFSET rip, 0 - ret - CFI_ENDPROC -END(ptregscall_common) - -ENTRY(stub_execve) - CFI_STARTPROC - popq %r11 - CFI_ADJUST_CFA_OFFSET -8 - CFI_REGISTER rip, r11 - SAVE_REST - FIXUP_TOP_OF_STACK %r11 - call sys_execve - RESTORE_TOP_OF_STACK %r11 - movq %rax,RAX(%rsp) - RESTORE_REST - jmp int_ret_from_sys_call - CFI_ENDPROC -END(stub_execve) - -/* - * sigreturn is special because it needs to restore all registers on return. - * This cannot be done with SYSRET, so use the IRET return path instead. - */ -ENTRY(stub_rt_sigreturn) - CFI_STARTPROC - addq $8, %rsp - CFI_ADJUST_CFA_OFFSET -8 - SAVE_REST - movq %rsp,%rdi - FIXUP_TOP_OF_STACK %r11 - call sys_rt_sigreturn - movq %rax,RAX(%rsp) # fixme, this could be done at the higher layer - RESTORE_REST - jmp int_ret_from_sys_call - CFI_ENDPROC -END(stub_rt_sigreturn) - -/* - * initial frame state for interrupts and exceptions - */ - .macro _frame ref - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,SS+8-\ref - /*CFI_REL_OFFSET ss,SS-\ref*/ - CFI_REL_OFFSET rsp,RSP-\ref - /*CFI_REL_OFFSET rflags,EFLAGS-\ref*/ - /*CFI_REL_OFFSET cs,CS-\ref*/ - CFI_REL_OFFSET rip,RIP-\ref - .endm - -/* initial frame state for interrupts (and exceptions without error code) */ -#define INTR_FRAME _frame RIP -/* initial frame state for exceptions with error code (and interrupts with - vector already pushed) */ -#define XCPT_FRAME _frame ORIG_RAX - -/* - * Interrupt entry/exit. - * - * Interrupt entry points save only callee clobbered registers in fast path. - * - * Entry runs with interrupts off. - */ - -/* 0(%rsp): interrupt number */ - .macro interrupt func - cld - SAVE_ARGS - leaq -ARGOFFSET(%rsp),%rdi # arg1 for handler - pushq %rbp - CFI_ADJUST_CFA_OFFSET 8 - CFI_REL_OFFSET rbp, 0 - movq %rsp,%rbp - CFI_DEF_CFA_REGISTER rbp - testl $3,CS(%rdi) - je 1f - swapgs - /* irqcount is used to check if a CPU is already on an interrupt - stack or not. While this is essentially redundant with preempt_count - it is a little cheaper to use a separate counter in the PDA - (short of moving irq_enter into assembly, which would be too - much work) */ -1: incl %gs:pda_irqcount - cmoveq %gs:pda_irqstackptr,%rsp - push %rbp # backlink for old unwinder - /* - * We entered an interrupt context - irqs are off: - */ - TRACE_IRQS_OFF - call \func - .endm - -ENTRY(common_interrupt) - XCPT_FRAME - interrupt do_IRQ - /* 0(%rsp): oldrsp-ARGOFFSET */ -ret_from_intr: - cli - TRACE_IRQS_OFF - decl %gs:pda_irqcount - leaveq - CFI_DEF_CFA_REGISTER rsp - CFI_ADJUST_CFA_OFFSET -8 -exit_intr: - GET_THREAD_INFO(%rcx) - testl $3,CS-ARGOFFSET(%rsp) - je retint_kernel - - /* Interrupt came from user space */ - /* - * Has a correct top of stack, but a partial stack frame - * %rcx: thread info. Interrupts off. - */ -retint_with_reschedule: - movl $_TIF_WORK_MASK,%edi -retint_check: - movl threadinfo_flags(%rcx),%edx - andl %edi,%edx - CFI_REMEMBER_STATE - jnz retint_careful -retint_swapgs: - /* - * The iretq could re-enable interrupts: - */ - cli - TRACE_IRQS_IRETQ - swapgs - jmp restore_args - -retint_restore_args: - cli - /* - * The iretq could re-enable interrupts: - */ - TRACE_IRQS_IRETQ -restore_args: - RESTORE_ARGS 0,8,0 -iret_label: - iretq - - .section __ex_table,"a" - .quad iret_label,bad_iret - .previous - .section .fixup,"ax" - /* force a signal here? this matches i386 behaviour */ - /* running with kernel gs */ -bad_iret: - movq $11,%rdi /* SIGSEGV */ - TRACE_IRQS_ON - sti - jmp do_exit - .previous - - /* edi: workmask, edx: work */ -retint_careful: - CFI_RESTORE_STATE - bt $TIF_NEED_RESCHED,%edx - jnc retint_signal - TRACE_IRQS_ON - sti - pushq %rdi - CFI_ADJUST_CFA_OFFSET 8 - call schedule - popq %rdi - CFI_ADJUST_CFA_OFFSET -8 - GET_THREAD_INFO(%rcx) - cli - TRACE_IRQS_OFF - jmp retint_check - -retint_signal: - testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx - jz retint_swapgs - TRACE_IRQS_ON - sti - SAVE_REST - movq $-1,ORIG_RAX(%rsp) - xorl %esi,%esi # oldset - movq %rsp,%rdi # &pt_regs - call do_notify_resume - RESTORE_REST - cli - TRACE_IRQS_OFF - movl $_TIF_NEED_RESCHED,%edi - GET_THREAD_INFO(%rcx) - jmp retint_check - -#ifdef CONFIG_PREEMPT - /* Returning to kernel space. Check if we need preemption */ - /* rcx: threadinfo. interrupts off. */ -ENTRY(retint_kernel) - cmpl $0,threadinfo_preempt_count(%rcx) - jnz retint_restore_args - bt $TIF_NEED_RESCHED,threadinfo_flags(%rcx) - jnc retint_restore_args - bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */ - jnc retint_restore_args - call preempt_schedule_irq - jmp exit_intr -#endif - - CFI_ENDPROC -END(common_interrupt) - -/* - * APIC interrupts. - */ - .macro apicinterrupt num,func - INTR_FRAME - pushq $~(\num) - CFI_ADJUST_CFA_OFFSET 8 - interrupt \func - jmp ret_from_intr - CFI_ENDPROC - .endm - -ENTRY(thermal_interrupt) - apicinterrupt THERMAL_APIC_VECTOR,smp_thermal_interrupt -END(thermal_interrupt) - -ENTRY(threshold_interrupt) - apicinterrupt THRESHOLD_APIC_VECTOR,mce_threshold_interrupt -END(threshold_interrupt) - -#ifdef CONFIG_SMP -ENTRY(reschedule_interrupt) - apicinterrupt RESCHEDULE_VECTOR,smp_reschedule_interrupt -END(reschedule_interrupt) - - .macro INVALIDATE_ENTRY num -ENTRY(invalidate_interrupt\num) - apicinterrupt INVALIDATE_TLB_VECTOR_START+\num,smp_invalidate_interrupt -END(invalidate_interrupt\num) - .endm - - INVALIDATE_ENTRY 0 - INVALIDATE_ENTRY 1 - INVALIDATE_ENTRY 2 - INVALIDATE_ENTRY 3 - INVALIDATE_ENTRY 4 - INVALIDATE_ENTRY 5 - INVALIDATE_ENTRY 6 - INVALIDATE_ENTRY 7 - -ENTRY(call_function_interrupt) - apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt -END(call_function_interrupt) -ENTRY(irq_move_cleanup_interrupt) - apicinterrupt IRQ_MOVE_CLEANUP_VECTOR,smp_irq_move_cleanup_interrupt -END(irq_move_cleanup_interrupt) -#endif - -ENTRY(apic_timer_interrupt) - apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt -END(apic_timer_interrupt) - -ENTRY(error_interrupt) - apicinterrupt ERROR_APIC_VECTOR,smp_error_interrupt -END(error_interrupt) - -ENTRY(spurious_interrupt) - apicinterrupt SPURIOUS_APIC_VECTOR,smp_spurious_interrupt -END(spurious_interrupt) - -/* - * Exception entry points. - */ - .macro zeroentry sym - INTR_FRAME - pushq $0 /* push error code/oldrax */ - CFI_ADJUST_CFA_OFFSET 8 - pushq %rax /* push real oldrax to the rdi slot */ - CFI_ADJUST_CFA_OFFSET 8 - CFI_REL_OFFSET rax,0 - leaq \sym(%rip),%rax - jmp error_entry - CFI_ENDPROC - .endm - - .macro errorentry sym - XCPT_FRAME - pushq %rax - CFI_ADJUST_CFA_OFFSET 8 - CFI_REL_OFFSET rax,0 - leaq \sym(%rip),%rax - jmp error_entry - CFI_ENDPROC - .endm - - /* error code is on the stack already */ - /* handle NMI like exceptions that can happen everywhere */ - .macro paranoidentry sym, ist=0, irqtrace=1 - SAVE_ALL - cld - movl $1,%ebx - movl $MSR_GS_BASE,%ecx - rdmsr - testl %edx,%edx - js 1f - swapgs - xorl %ebx,%ebx -1: - .if \ist - movq %gs:pda_data_offset, %rbp - .endif - movq %rsp,%rdi - movq ORIG_RAX(%rsp),%rsi - movq $-1,ORIG_RAX(%rsp) - .if \ist - subq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp) - .endif - call \sym - .if \ist - addq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp) - .endif - cli - .if \irqtrace - TRACE_IRQS_OFF - .endif - .endm - - /* - * "Paranoid" exit path from exception stack. - * Paranoid because this is used by NMIs and cannot take - * any kernel state for granted. - * We don't do kernel preemption checks here, because only - * NMI should be common and it does not enable IRQs and - * cannot get reschedule ticks. - * - * "trace" is 0 for the NMI handler only, because irq-tracing - * is fundamentally NMI-unsafe. (we cannot change the soft and - * hard flags at once, atomically) - */ - .macro paranoidexit trace=1 - /* ebx: no swapgs flag */ -paranoid_exit\trace: - testl %ebx,%ebx /* swapgs needed? */ - jnz paranoid_restore\trace - testl $3,CS(%rsp) - jnz paranoid_userspace\trace -paranoid_swapgs\trace: - .if \trace - TRACE_IRQS_IRETQ 0 - .endif - swapgs -paranoid_restore\trace: - RESTORE_ALL 8 - iretq -paranoid_userspace\trace: - GET_THREAD_INFO(%rcx) - movl threadinfo_flags(%rcx),%ebx - andl $_TIF_WORK_MASK,%ebx - jz paranoid_swapgs\trace - movq %rsp,%rdi /* &pt_regs */ - call sync_regs - movq %rax,%rsp /* switch stack for scheduling */ - testl $_TIF_NEED_RESCHED,%ebx - jnz paranoid_schedule\trace - movl %ebx,%edx /* arg3: thread flags */ - .if \trace - TRACE_IRQS_ON - .endif - sti - xorl %esi,%esi /* arg2: oldset */ - movq %rsp,%rdi /* arg1: &pt_regs */ - call do_notify_resume - cli - .if \trace - TRACE_IRQS_OFF - .endif - jmp paranoid_userspace\trace -paranoid_schedule\trace: - .if \trace - TRACE_IRQS_ON - .endif - sti - call schedule - cli - .if \trace - TRACE_IRQS_OFF - .endif - jmp paranoid_userspace\trace - CFI_ENDPROC - .endm - -/* - * Exception entry point. This expects an error code/orig_rax on the stack - * and the exception handler in %rax. - */ -KPROBE_ENTRY(error_entry) - _frame RDI - CFI_REL_OFFSET rax,0 - /* rdi slot contains rax, oldrax contains error code */ - cld - subq $14*8,%rsp - CFI_ADJUST_CFA_OFFSET (14*8) - movq %rsi,13*8(%rsp) - CFI_REL_OFFSET rsi,RSI - movq 14*8(%rsp),%rsi /* load rax from rdi slot */ - CFI_REGISTER rax,rsi - movq %rdx,12*8(%rsp) - CFI_REL_OFFSET rdx,RDX - movq %rcx,11*8(%rsp) - CFI_REL_OFFSET rcx,RCX - movq %rsi,10*8(%rsp) /* store rax */ - CFI_REL_OFFSET rax,RAX - movq %r8, 9*8(%rsp) - CFI_REL_OFFSET r8,R8 - movq %r9, 8*8(%rsp) - CFI_REL_OFFSET r9,R9 - movq %r10,7*8(%rsp) - CFI_REL_OFFSET r10,R10 - movq %r11,6*8(%rsp) - CFI_REL_OFFSET r11,R11 - movq %rbx,5*8(%rsp) - CFI_REL_OFFSET rbx,RBX - movq %rbp,4*8(%rsp) - CFI_REL_OFFSET rbp,RBP - movq %r12,3*8(%rsp) - CFI_REL_OFFSET r12,R12 - movq %r13,2*8(%rsp) - CFI_REL_OFFSET r13,R13 - movq %r14,1*8(%rsp) - CFI_REL_OFFSET r14,R14 - movq %r15,(%rsp) - CFI_REL_OFFSET r15,R15 - xorl %ebx,%ebx - testl $3,CS(%rsp) - je error_kernelspace -error_swapgs: - swapgs -error_sti: - movq %rdi,RDI(%rsp) - CFI_REL_OFFSET rdi,RDI - movq %rsp,%rdi - movq ORIG_RAX(%rsp),%rsi /* get error code */ - movq $-1,ORIG_RAX(%rsp) - call *%rax - /* ebx: no swapgs flag (1: don't need swapgs, 0: need it) */ -error_exit: - movl %ebx,%eax - RESTORE_REST - cli - TRACE_IRQS_OFF - GET_THREAD_INFO(%rcx) - testl %eax,%eax - jne retint_kernel - movl threadinfo_flags(%rcx),%edx - movl $_TIF_WORK_MASK,%edi - andl %edi,%edx - jnz retint_careful - /* - * The iret might restore flags: - */ - TRACE_IRQS_IRETQ - swapgs - RESTORE_ARGS 0,8,0 - jmp iret_label - CFI_ENDPROC - -error_kernelspace: - incl %ebx - /* There are two places in the kernel that can potentially fault with - usergs. Handle them here. The exception handlers after - iret run with kernel gs again, so don't set the user space flag. - B stepping K8s sometimes report an truncated RIP for IRET - exceptions returning to compat mode. Check for these here too. */ - leaq iret_label(%rip),%rbp - cmpq %rbp,RIP(%rsp) - je error_swapgs - movl %ebp,%ebp /* zero extend */ - cmpq %rbp,RIP(%rsp) - je error_swapgs - cmpq $gs_change,RIP(%rsp) - je error_swapgs - jmp error_sti -KPROBE_END(error_entry) - - /* Reload gs selector with exception handling */ - /* edi: new selector */ -ENTRY(load_gs_index) - CFI_STARTPROC - pushf - CFI_ADJUST_CFA_OFFSET 8 - cli - swapgs -gs_change: - movl %edi,%gs -2: mfence /* workaround */ - swapgs - popf - CFI_ADJUST_CFA_OFFSET -8 - ret - CFI_ENDPROC -ENDPROC(load_gs_index) - - .section __ex_table,"a" - .align 8 - .quad gs_change,bad_gs - .previous - .section .fixup,"ax" - /* running with kernelgs */ -bad_gs: - swapgs /* switch back to user gs */ - xorl %eax,%eax - movl %eax,%gs - jmp 2b - .previous - -/* - * Create a kernel thread. - * - * C extern interface: - * extern long kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) - * - * asm input arguments: - * rdi: fn, rsi: arg, rdx: flags - */ -ENTRY(kernel_thread) - CFI_STARTPROC - FAKE_STACK_FRAME $child_rip - SAVE_ALL - - # rdi: flags, rsi: usp, rdx: will be &pt_regs - movq %rdx,%rdi - orq kernel_thread_flags(%rip),%rdi - movq $-1, %rsi - movq %rsp, %rdx - - xorl %r8d,%r8d - xorl %r9d,%r9d - - # clone now - call do_fork - movq %rax,RAX(%rsp) - xorl %edi,%edi - - /* - * It isn't worth to check for reschedule here, - * so internally to the x86_64 port you can rely on kernel_thread() - * not to reschedule the child before returning, this avoids the need - * of hacks for example to fork off the per-CPU idle tasks. - * [Hopefully no generic code relies on the reschedule -AK] - */ - RESTORE_ALL - UNFAKE_STACK_FRAME - ret - CFI_ENDPROC -ENDPROC(kernel_thread) - -child_rip: - pushq $0 # fake return address - CFI_STARTPROC - /* - * Here we are in the child and the registers are set as they were - * at kernel_thread() invocation in the parent. - */ - movq %rdi, %rax - movq %rsi, %rdi - call *%rax - # exit - xorl %edi, %edi - call do_exit - CFI_ENDPROC -ENDPROC(child_rip) - -/* - * execve(). This function needs to use IRET, not SYSRET, to set up all state properly. - * - * C extern interface: - * extern long execve(char *name, char **argv, char **envp) - * - * asm input arguments: - * rdi: name, rsi: argv, rdx: envp - * - * We want to fallback into: - * extern long sys_execve(char *name, char **argv,char **envp, struct pt_regs regs) - * - * do_sys_execve asm fallback arguments: - * rdi: name, rsi: argv, rdx: envp, fake frame on the stack - */ -ENTRY(kernel_execve) - CFI_STARTPROC - FAKE_STACK_FRAME $0 - SAVE_ALL - call sys_execve - movq %rax, RAX(%rsp) - RESTORE_REST - testq %rax,%rax - je int_ret_from_sys_call - RESTORE_ARGS - UNFAKE_STACK_FRAME - ret - CFI_ENDPROC -ENDPROC(kernel_execve) - -KPROBE_ENTRY(page_fault) - errorentry do_page_fault -KPROBE_END(page_fault) - -ENTRY(coprocessor_error) - zeroentry do_coprocessor_error -END(coprocessor_error) - -ENTRY(simd_coprocessor_error) - zeroentry do_simd_coprocessor_error -END(simd_coprocessor_error) - -ENTRY(device_not_available) - zeroentry math_state_restore -END(device_not_available) - - /* runs on exception stack */ -KPROBE_ENTRY(debug) - INTR_FRAME - pushq $0 - CFI_ADJUST_CFA_OFFSET 8 - paranoidentry do_debug, DEBUG_STACK - paranoidexit -KPROBE_END(debug) - - /* runs on exception stack */ -KPROBE_ENTRY(nmi) - INTR_FRAME - pushq $-1 - CFI_ADJUST_CFA_OFFSET 8 - paranoidentry do_nmi, 0, 0 -#ifdef CONFIG_TRACE_IRQFLAGS - paranoidexit 0 -#else - jmp paranoid_exit1 - CFI_ENDPROC -#endif -KPROBE_END(nmi) - -KPROBE_ENTRY(int3) - INTR_FRAME - pushq $0 - CFI_ADJUST_CFA_OFFSET 8 - paranoidentry do_int3, DEBUG_STACK - jmp paranoid_exit1 - CFI_ENDPROC -KPROBE_END(int3) - -ENTRY(overflow) - zeroentry do_overflow -END(overflow) - -ENTRY(bounds) - zeroentry do_bounds -END(bounds) - -ENTRY(invalid_op) - zeroentry do_invalid_op -END(invalid_op) - -ENTRY(coprocessor_segment_overrun) - zeroentry do_coprocessor_segment_overrun -END(coprocessor_segment_overrun) - -ENTRY(reserved) - zeroentry do_reserved -END(reserved) - - /* runs on exception stack */ -ENTRY(double_fault) - XCPT_FRAME - paranoidentry do_double_fault - jmp paranoid_exit1 - CFI_ENDPROC -END(double_fault) - -ENTRY(invalid_TSS) - errorentry do_invalid_TSS -END(invalid_TSS) - -ENTRY(segment_not_present) - errorentry do_segment_not_present -END(segment_not_present) - - /* runs on exception stack */ -ENTRY(stack_segment) - XCPT_FRAME - paranoidentry do_stack_segment - jmp paranoid_exit1 - CFI_ENDPROC -END(stack_segment) - -KPROBE_ENTRY(general_protection) - errorentry do_general_protection -KPROBE_END(general_protection) - -ENTRY(alignment_check) - errorentry do_alignment_check -END(alignment_check) - -ENTRY(divide_error) - zeroentry do_divide_error -END(divide_error) - -ENTRY(spurious_interrupt_bug) - zeroentry do_spurious_interrupt_bug -END(spurious_interrupt_bug) - -#ifdef CONFIG_X86_MCE - /* runs on exception stack */ -ENTRY(machine_check) - INTR_FRAME - pushq $0 - CFI_ADJUST_CFA_OFFSET 8 - paranoidentry do_machine_check - jmp paranoid_exit1 - CFI_ENDPROC -END(machine_check) -#endif - -/* Call softirq on interrupt stack. Interrupts are off. */ -ENTRY(call_softirq) - CFI_STARTPROC - push %rbp - CFI_ADJUST_CFA_OFFSET 8 - CFI_REL_OFFSET rbp,0 - mov %rsp,%rbp - CFI_DEF_CFA_REGISTER rbp - incl %gs:pda_irqcount - cmove %gs:pda_irqstackptr,%rsp - push %rbp # backlink for old unwinder - call __do_softirq - leaveq - CFI_DEF_CFA_REGISTER rsp - CFI_ADJUST_CFA_OFFSET -8 - decl %gs:pda_irqcount - ret - CFI_ENDPROC -ENDPROC(call_softirq) - -KPROBE_ENTRY(ignore_sysret) - CFI_STARTPROC - mov $-ENOSYS,%eax - sysret - CFI_ENDPROC -ENDPROC(ignore_sysret) diff --git a/arch/x86_64/kernel/genapic_64.c b/arch/x86_64/kernel/genapic_64.c deleted file mode 100644 index 47496a40e84..00000000000 --- a/arch/x86_64/kernel/genapic_64.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright 2004 James Cleverdon, IBM. - * Subject to the GNU Public License, v.2 - * - * Generic APIC sub-arch probe layer. - * - * Hacked for x86-64 by James Cleverdon from i386 architecture code by - * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and - * James Cleverdon. - */ -#include <linux/threads.h> -#include <linux/cpumask.h> -#include <linux/string.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/ctype.h> -#include <linux/init.h> - -#include <asm/smp.h> -#include <asm/ipi.h> -#include <asm/genapic.h> - -#ifdef CONFIG_ACPI -#include <acpi/acpi_bus.h> -#endif - -/* which logical CPU number maps to which CPU (physical APIC ID) */ -u8 x86_cpu_to_apicid[NR_CPUS] __read_mostly - = { [0 ... NR_CPUS-1] = BAD_APICID }; -EXPORT_SYMBOL(x86_cpu_to_apicid); - -u8 x86_cpu_to_log_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; - -struct genapic __read_mostly *genapic = &apic_flat; - -/* - * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode. - */ -void __init setup_apic_routing(void) -{ -#ifdef CONFIG_ACPI - /* - * Quirk: some x86_64 machines can only use physical APIC mode - * regardless of how many processors are present (x86_64 ES7000 - * is an example). - */ - if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID && - (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) - genapic = &apic_physflat; - else -#endif - - if (cpus_weight(cpu_possible_map) <= 8) - genapic = &apic_flat; - else - genapic = &apic_physflat; - - printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name); -} - -/* Same for both flat and physical. */ - -void send_IPI_self(int vector) -{ - __send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL); -} diff --git a/arch/x86_64/kernel/genapic_flat_64.c b/arch/x86_64/kernel/genapic_flat_64.c deleted file mode 100644 index ecb01eefdd2..00000000000 --- a/arch/x86_64/kernel/genapic_flat_64.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * Copyright 2004 James Cleverdon, IBM. - * Subject to the GNU Public License, v.2 - * - * Flat APIC subarch code. - * - * Hacked for x86-64 by James Cleverdon from i386 architecture code by - * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and - * James Cleverdon. - */ -#include <linux/errno.h> -#include <linux/threads.h> -#include <linux/cpumask.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/ctype.h> -#include <linux/init.h> -#include <asm/smp.h> -#include <asm/ipi.h> -#include <asm/genapic.h> - -static cpumask_t flat_target_cpus(void) -{ - return cpu_online_map; -} - -static cpumask_t flat_vector_allocation_domain(int cpu) -{ - /* Careful. Some cpus do not strictly honor the set of cpus - * specified in the interrupt destination when using lowest - * priority interrupt delivery mode. - * - * In particular there was a hyperthreading cpu observed to - * deliver interrupts to the wrong hyperthread when only one - * hyperthread was specified in the interrupt desitination. - */ - cpumask_t domain = { { [0] = APIC_ALL_CPUS, } }; - return domain; -} - -/* - * Set up the logical destination ID. - * - * Intel recommends to set DFR, LDR and TPR before enabling - * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel - * document number 292116). So here it goes... - */ -static void flat_init_apic_ldr(void) -{ - unsigned long val; - unsigned long num, id; - - num = smp_processor_id(); - id = 1UL << num; - x86_cpu_to_log_apicid[num] = id; - apic_write(APIC_DFR, APIC_DFR_FLAT); - val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; - val |= SET_APIC_LOGICAL_ID(id); - apic_write(APIC_LDR, val); -} - -static void flat_send_IPI_mask(cpumask_t cpumask, int vector) -{ - unsigned long mask = cpus_addr(cpumask)[0]; - unsigned long flags; - - local_irq_save(flags); - __send_IPI_dest_field(mask, vector, APIC_DEST_LOGICAL); - local_irq_restore(flags); -} - -static void flat_send_IPI_allbutself(int vector) -{ -#ifdef CONFIG_HOTPLUG_CPU - int hotplug = 1; -#else - int hotplug = 0; -#endif - if (hotplug || vector == NMI_VECTOR) { - cpumask_t allbutme = cpu_online_map; - - cpu_clear(smp_processor_id(), allbutme); - - if (!cpus_empty(allbutme)) - flat_send_IPI_mask(allbutme, vector); - } else if (num_online_cpus() > 1) { - __send_IPI_shortcut(APIC_DEST_ALLBUT, vector,APIC_DEST_LOGICAL); - } -} - -static void flat_send_IPI_all(int vector) -{ - if (vector == NMI_VECTOR) - flat_send_IPI_mask(cpu_online_map, vector); - else - __send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL); -} - -static int flat_apic_id_registered(void) -{ - return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map); -} - -static unsigned int flat_cpu_mask_to_apicid(cpumask_t cpumask) -{ - return cpus_addr(cpumask)[0] & APIC_ALL_CPUS; -} - -static unsigned int phys_pkg_id(int index_msb) -{ - return hard_smp_processor_id() >> index_msb; -} - -struct genapic apic_flat = { - .name = "flat", - .int_delivery_mode = dest_LowestPrio, - .int_dest_mode = (APIC_DEST_LOGICAL != 0), - .target_cpus = flat_target_cpus, - .vector_allocation_domain = flat_vector_allocation_domain, - .apic_id_registered = flat_apic_id_registered, - .init_apic_ldr = flat_init_apic_ldr, - .send_IPI_all = flat_send_IPI_all, - .send_IPI_allbutself = flat_send_IPI_allbutself, - .send_IPI_mask = flat_send_IPI_mask, - .cpu_mask_to_apicid = flat_cpu_mask_to_apicid, - .phys_pkg_id = phys_pkg_id, -}; - -/* - * Physflat mode is used when there are more than 8 CPUs on a AMD system. - * We cannot use logical delivery in this case because the mask - * overflows, so use physical mode. - */ - -static cpumask_t physflat_target_cpus(void) -{ - return cpu_online_map; -} - -static cpumask_t physflat_vector_allocation_domain(int cpu) -{ - cpumask_t domain = CPU_MASK_NONE; - cpu_set(cpu, domain); - return domain; -} - - -static void physflat_send_IPI_mask(cpumask_t cpumask, int vector) -{ - send_IPI_mask_sequence(cpumask, vector); -} - -static void physflat_send_IPI_allbutself(int vector) -{ - cpumask_t allbutme = cpu_online_map; - - cpu_clear(smp_processor_id(), allbutme); - physflat_send_IPI_mask(allbutme, vector); -} - -static void physflat_send_IPI_all(int vector) -{ - physflat_send_IPI_mask(cpu_online_map, vector); -} - -static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask) -{ - int cpu; - - /* - * We're using fixed IRQ delivery, can only return one phys APIC ID. - * May as well be the first. - */ - cpu = first_cpu(cpumask); - if ((unsigned)cpu < NR_CPUS) - return x86_cpu_to_apicid[cpu]; - else - return BAD_APICID; -} - -struct genapic apic_physflat = { - .name = "physical flat", - .int_delivery_mode = dest_Fixed, - .int_dest_mode = (APIC_DEST_PHYSICAL != 0), - .target_cpus = physflat_target_cpus, - .vector_allocation_domain = physflat_vector_allocation_domain, - .apic_id_registered = flat_apic_id_registered, - .init_apic_ldr = flat_init_apic_ldr,/*not needed, but shouldn't hurt*/ - .send_IPI_all = physflat_send_IPI_all, - .send_IPI_allbutself = physflat_send_IPI_allbutself, - .send_IPI_mask = physflat_send_IPI_mask, - .cpu_mask_to_apicid = physflat_cpu_mask_to_apicid, - .phys_pkg_id = phys_pkg_id, -}; diff --git a/arch/x86_64/kernel/head64.c b/arch/x86_64/kernel/head64.c deleted file mode 100644 index 6c34bdd22e2..00000000000 --- a/arch/x86_64/kernel/head64.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * linux/arch/x86_64/kernel/head64.c -- prepare to run common code - * - * Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE - */ - -#include <linux/init.h> -#include <linux/linkage.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/percpu.h> - -#include <asm/processor.h> -#include <asm/proto.h> -#include <asm/smp.h> -#include <asm/bootsetup.h> -#include <asm/setup.h> -#include <asm/desc.h> -#include <asm/pgtable.h> -#include <asm/tlbflush.h> -#include <asm/sections.h> - -static void __init zap_identity_mappings(void) -{ - pgd_t *pgd = pgd_offset_k(0UL); - pgd_clear(pgd); - __flush_tlb(); -} - -/* Don't add a printk in there. printk relies on the PDA which is not initialized - yet. */ -static void __init clear_bss(void) -{ - memset(__bss_start, 0, - (unsigned long) __bss_stop - (unsigned long) __bss_start); -} - -#define NEW_CL_POINTER 0x228 /* Relative to real mode data */ -#define OLD_CL_MAGIC_ADDR 0x20 -#define OLD_CL_MAGIC 0xA33F -#define OLD_CL_OFFSET 0x22 - -static void __init copy_bootdata(char *real_mode_data) -{ - unsigned long new_data; - char * command_line; - - memcpy(x86_boot_params, real_mode_data, BOOT_PARAM_SIZE); - new_data = *(u32 *) (x86_boot_params + NEW_CL_POINTER); - if (!new_data) { - if (OLD_CL_MAGIC != *(u16 *)(real_mode_data + OLD_CL_MAGIC_ADDR)) { - return; - } - new_data = __pa(real_mode_data) + *(u16 *)(real_mode_data + OLD_CL_OFFSET); - } - command_line = __va(new_data); - memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); -} - -void __init x86_64_start_kernel(char * real_mode_data) -{ - int i; - - /* clear bss before set_intr_gate with early_idt_handler */ - clear_bss(); - - /* Make NULL pointers segfault */ - zap_identity_mappings(); - - for (i = 0; i < IDT_ENTRIES; i++) - set_intr_gate(i, early_idt_handler); - asm volatile("lidt %0" :: "m" (idt_descr)); - - early_printk("Kernel alive\n"); - - for (i = 0; i < NR_CPUS; i++) - cpu_pda(i) = &boot_cpu_pda[i]; - - pda_init(0); - copy_bootdata(__va(real_mode_data)); -#ifdef CONFIG_SMP - cpu_set(0, cpu_online_map); -#endif - start_kernel(); -} diff --git a/arch/x86_64/kernel/head_64.S b/arch/x86_64/kernel/head_64.S deleted file mode 100644 index b6167fe3330..00000000000 --- a/arch/x86_64/kernel/head_64.S +++ /dev/null @@ -1,416 +0,0 @@ -/* - * linux/arch/x86_64/kernel/head.S -- start in 32bit and switch to 64bit - * - * Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE - * Copyright (C) 2000 Pavel Machek <pavel@suse.cz> - * Copyright (C) 2000 Karsten Keil <kkeil@suse.de> - * Copyright (C) 2001,2002 Andi Kleen <ak@suse.de> - * Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com> - */ - - -#include <linux/linkage.h> -#include <linux/threads.h> -#include <linux/init.h> -#include <asm/desc.h> -#include <asm/segment.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/msr.h> -#include <asm/cache.h> - -/* we are not able to switch in one step to the final KERNEL ADRESS SPACE - * because we need identity-mapped pages. - * - */ - - .text - .section .text.head - .code64 - .globl startup_64 -startup_64: - - /* - * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1, - * and someone has loaded an identity mapped page table - * for us. These identity mapped page tables map all of the - * kernel pages and possibly all of memory. - * - * %esi holds a physical pointer to real_mode_data. - * - * We come here either directly from a 64bit bootloader, or from - * arch/x86_64/boot/compressed/head.S. - * - * We only come here initially at boot nothing else comes here. - * - * Since we may be loaded at an address different from what we were - * compiled to run at we first fixup the physical addresses in our page - * tables and then reload them. - */ - - /* Compute the delta between the address I am compiled to run at and the - * address I am actually running at. - */ - leaq _text(%rip), %rbp - subq $_text - __START_KERNEL_map, %rbp - - /* Is the address not 2M aligned? */ - movq %rbp, %rax - andl $~LARGE_PAGE_MASK, %eax - testl %eax, %eax - jnz bad_address - - /* Is the address too large? */ - leaq _text(%rip), %rdx - movq $PGDIR_SIZE, %rax - cmpq %rax, %rdx - jae bad_address - - /* Fixup the physical addresses in the page table - */ - addq %rbp, init_level4_pgt + 0(%rip) - addq %rbp, init_level4_pgt + (258*8)(%rip) - addq %rbp, init_level4_pgt + (511*8)(%rip) - - addq %rbp, level3_ident_pgt + 0(%rip) - - addq %rbp, level3_kernel_pgt + (510*8)(%rip) - addq %rbp, level3_kernel_pgt + (511*8)(%rip) - - addq %rbp, level2_fixmap_pgt + (506*8)(%rip) - - /* Add an Identity mapping if I am above 1G */ - leaq _text(%rip), %rdi - andq $LARGE_PAGE_MASK, %rdi - - movq %rdi, %rax - shrq $PUD_SHIFT, %rax - andq $(PTRS_PER_PUD - 1), %rax - jz ident_complete - - leaq (level2_spare_pgt - __START_KERNEL_map + _KERNPG_TABLE)(%rbp), %rdx - leaq level3_ident_pgt(%rip), %rbx - movq %rdx, 0(%rbx, %rax, 8) - - movq %rdi, %rax - shrq $PMD_SHIFT, %rax - andq $(PTRS_PER_PMD - 1), %rax - leaq __PAGE_KERNEL_LARGE_EXEC(%rdi), %rdx - leaq level2_spare_pgt(%rip), %rbx - movq %rdx, 0(%rbx, %rax, 8) -ident_complete: - - /* Fixup the kernel text+data virtual addresses - */ - leaq level2_kernel_pgt(%rip), %rdi - leaq 4096(%rdi), %r8 - /* See if it is a valid page table entry */ -1: testq $1, 0(%rdi) - jz 2f - addq %rbp, 0(%rdi) - /* Go to the next page */ -2: addq $8, %rdi - cmp %r8, %rdi - jne 1b - - /* Fixup phys_base */ - addq %rbp, phys_base(%rip) - -#ifdef CONFIG_SMP - addq %rbp, trampoline_level4_pgt + 0(%rip) - addq %rbp, trampoline_level4_pgt + (511*8)(%rip) -#endif -#ifdef CONFIG_ACPI_SLEEP - addq %rbp, wakeup_level4_pgt + 0(%rip) - addq %rbp, wakeup_level4_pgt + (511*8)(%rip) -#endif - - /* Due to ENTRY(), sometimes the empty space gets filled with - * zeros. Better take a jmp than relying on empty space being - * filled with 0x90 (nop) - */ - jmp secondary_startup_64 -ENTRY(secondary_startup_64) - /* - * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1, - * and someone has loaded a mapped page table. - * - * %esi holds a physical pointer to real_mode_data. - * - * We come here either from startup_64 (using physical addresses) - * or from trampoline.S (using virtual addresses). - * - * Using virtual addresses from trampoline.S removes the need - * to have any identity mapped pages in the kernel page table - * after the boot processor executes this code. - */ - - /* Enable PAE mode and PGE */ - xorq %rax, %rax - btsq $5, %rax - btsq $7, %rax - movq %rax, %cr4 - - /* Setup early boot stage 4 level pagetables. */ - movq $(init_level4_pgt - __START_KERNEL_map), %rax - addq phys_base(%rip), %rax - movq %rax, %cr3 - - /* Ensure I am executing from virtual addresses */ - movq $1f, %rax - jmp *%rax -1: - - /* Check if nx is implemented */ - movl $0x80000001, %eax - cpuid - movl %edx,%edi - - /* Setup EFER (Extended Feature Enable Register) */ - movl $MSR_EFER, %ecx - rdmsr - btsl $_EFER_SCE, %eax /* Enable System Call */ - btl $20,%edi /* No Execute supported? */ - jnc 1f - btsl $_EFER_NX, %eax -1: wrmsr /* Make changes effective */ - - /* Setup cr0 */ -#define CR0_PM 1 /* protected mode */ -#define CR0_MP (1<<1) -#define CR0_ET (1<<4) -#define CR0_NE (1<<5) -#define CR0_WP (1<<16) -#define CR0_AM (1<<18) -#define CR0_PAGING (1<<31) - movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax - /* Make changes effective */ - movq %rax, %cr0 - - /* Setup a boot time stack */ - movq init_rsp(%rip),%rsp - - /* zero EFLAGS after setting rsp */ - pushq $0 - popfq - - /* - * We must switch to a new descriptor in kernel space for the GDT - * because soon the kernel won't have access anymore to the userspace - * addresses where we're currently running on. We have to do that here - * because in 32bit we couldn't load a 64bit linear address. - */ - lgdt cpu_gdt_descr(%rip) - - /* set up data segments. actually 0 would do too */ - movl $__KERNEL_DS,%eax - movl %eax,%ds - movl %eax,%ss - movl %eax,%es - - /* - * We don't really need to load %fs or %gs, but load them anyway - * to kill any stale realmode selectors. This allows execution - * under VT hardware. - */ - movl %eax,%fs - movl %eax,%gs - - /* - * Setup up a dummy PDA. this is just for some early bootup code - * that does in_interrupt() - */ - movl $MSR_GS_BASE,%ecx - movq $empty_zero_page,%rax - movq %rax,%rdx - shrq $32,%rdx - wrmsr - - /* esi is pointer to real mode structure with interesting info. - pass it to C */ - movl %esi, %edi - - /* Finally jump to run C code and to be on real kernel address - * Since we are running on identity-mapped space we have to jump - * to the full 64bit address, this is only possible as indirect - * jump. In addition we need to ensure %cs is set so we make this - * a far return. - */ - movq initial_code(%rip),%rax - pushq $0 # fake return address to stop unwinder - pushq $__KERNEL_CS # set correct cs - pushq %rax # target address in negative space - lretq - - /* SMP bootup changes these two */ -#ifndef CONFIG_HOTPLUG_CPU - .pushsection .init.data -#endif - .align 8 - .globl initial_code -initial_code: - .quad x86_64_start_kernel -#ifndef CONFIG_HOTPLUG_CPU - .popsection -#endif - .globl init_rsp -init_rsp: - .quad init_thread_union+THREAD_SIZE-8 - -bad_address: - jmp bad_address - -ENTRY(early_idt_handler) - cmpl $2,early_recursion_flag(%rip) - jz 1f - incl early_recursion_flag(%rip) - xorl %eax,%eax - movq 8(%rsp),%rsi # get rip - movq (%rsp),%rdx - movq %cr2,%rcx - leaq early_idt_msg(%rip),%rdi - call early_printk - cmpl $2,early_recursion_flag(%rip) - jz 1f - call dump_stack -#ifdef CONFIG_KALLSYMS - leaq early_idt_ripmsg(%rip),%rdi - movq 8(%rsp),%rsi # get rip again - call __print_symbol -#endif -1: hlt - jmp 1b -early_recursion_flag: - .long 0 - -early_idt_msg: - .asciz "PANIC: early exception rip %lx error %lx cr2 %lx\n" -early_idt_ripmsg: - .asciz "RIP %s\n" - -.balign PAGE_SIZE - -#define NEXT_PAGE(name) \ - .balign PAGE_SIZE; \ -ENTRY(name) - -/* Automate the creation of 1 to 1 mapping pmd entries */ -#define PMDS(START, PERM, COUNT) \ - i = 0 ; \ - .rept (COUNT) ; \ - .quad (START) + (i << 21) + (PERM) ; \ - i = i + 1 ; \ - .endr - - /* - * This default setting generates an ident mapping at address 0x100000 - * and a mapping for the kernel that precisely maps virtual address - * 0xffffffff80000000 to physical address 0x000000. (always using - * 2Mbyte large pages provided by PAE mode) - */ -NEXT_PAGE(init_level4_pgt) - .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE - .fill 257,8,0 - .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE - .fill 252,8,0 - /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ - .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE - -NEXT_PAGE(level3_ident_pgt) - .quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE - .fill 511,8,0 - -NEXT_PAGE(level3_kernel_pgt) - .fill 510,8,0 - /* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */ - .quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE - .quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE - -NEXT_PAGE(level2_fixmap_pgt) - .fill 506,8,0 - .quad level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE - /* 8MB reserved for vsyscalls + a 2MB hole = 4 + 1 entries */ - .fill 5,8,0 - -NEXT_PAGE(level1_fixmap_pgt) - .fill 512,8,0 - -NEXT_PAGE(level2_ident_pgt) - /* Since I easily can, map the first 1G. - * Don't set NX because code runs from these pages. - */ - PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD) - -NEXT_PAGE(level2_kernel_pgt) - /* 40MB kernel mapping. The kernel code cannot be bigger than that. - When you change this change KERNEL_TEXT_SIZE in page.h too. */ - /* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */ - PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, KERNEL_TEXT_SIZE/PMD_SIZE) - /* Module mapping starts here */ - .fill (PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0 - -NEXT_PAGE(level2_spare_pgt) - .fill 512,8,0 - -#undef PMDS -#undef NEXT_PAGE - - .data - .align 16 - .globl cpu_gdt_descr -cpu_gdt_descr: - .word gdt_end-cpu_gdt_table-1 -gdt: - .quad cpu_gdt_table -#ifdef CONFIG_SMP - .rept NR_CPUS-1 - .word 0 - .quad 0 - .endr -#endif - -ENTRY(phys_base) - /* This must match the first entry in level2_kernel_pgt */ - .quad 0x0000000000000000 - -/* We need valid kernel segments for data and code in long mode too - * IRET will check the segment types kkeil 2000/10/28 - * Also sysret mandates a special GDT layout - */ - - .section .data.page_aligned, "aw" - .align PAGE_SIZE - -/* The TLS descriptors are currently at a different place compared to i386. - Hopefully nobody expects them at a fixed place (Wine?) */ - -ENTRY(cpu_gdt_table) - .quad 0x0000000000000000 /* NULL descriptor */ - .quad 0x00cf9b000000ffff /* __KERNEL32_CS */ - .quad 0x00af9b000000ffff /* __KERNEL_CS */ - .quad 0x00cf93000000ffff /* __KERNEL_DS */ - .quad 0x00cffb000000ffff /* __USER32_CS */ - .quad 0x00cff3000000ffff /* __USER_DS, __USER32_DS */ - .quad 0x00affb000000ffff /* __USER_CS */ - .quad 0x0 /* unused */ - .quad 0,0 /* TSS */ - .quad 0,0 /* LDT */ - .quad 0,0,0 /* three TLS descriptors */ - .quad 0x0000f40000000000 /* node/CPU stored in limit */ -gdt_end: - /* asm/segment.h:GDT_ENTRIES must match this */ - /* This should be a multiple of the cache line size */ - /* GDTs of other CPUs are now dynamically allocated */ - - /* zero the remaining page */ - .fill PAGE_SIZE / 8 - GDT_ENTRIES,8,0 - - .section .bss, "aw", @nobits - .align L1_CACHE_BYTES -ENTRY(idt_table) - .skip 256 * 16 - - .section .bss.page_aligned, "aw", @nobits - .align PAGE_SIZE -ENTRY(empty_zero_page) - .skip PAGE_SIZE diff --git a/arch/x86_64/kernel/hpet_64.c b/arch/x86_64/kernel/hpet_64.c deleted file mode 100644 index e2d1b912e15..00000000000 --- a/arch/x86_64/kernel/hpet_64.c +++ /dev/null @@ -1,493 +0,0 @@ -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/mc146818rtc.h> -#include <linux/time.h> -#include <linux/clocksource.h> -#include <linux/ioport.h> -#include <linux/acpi.h> -#include <linux/hpet.h> -#include <asm/pgtable.h> -#include <asm/vsyscall.h> -#include <asm/timex.h> -#include <asm/hpet.h> - -#define HPET_MASK 0xFFFFFFFF -#define HPET_SHIFT 22 - -/* FSEC = 10^-15 NSEC = 10^-9 */ -#define FSEC_PER_NSEC 1000000 - -int nohpet __initdata; - -unsigned long hpet_address; -unsigned long hpet_period; /* fsecs / HPET clock */ -unsigned long hpet_tick; /* HPET clocks / interrupt */ - -int hpet_use_timer; /* Use counter of hpet for time keeping, - * otherwise PIT - */ - -#ifdef CONFIG_HPET -static __init int late_hpet_init(void) -{ - struct hpet_data hd; - unsigned int ntimer; - - if (!hpet_address) - return 0; - - memset(&hd, 0, sizeof(hd)); - - ntimer = hpet_readl(HPET_ID); - ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT; - ntimer++; - - /* - * Register with driver. - * Timer0 and Timer1 is used by platform. - */ - hd.hd_phys_address = hpet_address; - hd.hd_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE); - hd.hd_nirqs = ntimer; - hd.hd_flags = HPET_DATA_PLATFORM; - hpet_reserve_timer(&hd, 0); -#ifdef CONFIG_HPET_EMULATE_RTC - hpet_reserve_timer(&hd, 1); -#endif - hd.hd_irq[0] = HPET_LEGACY_8254; - hd.hd_irq[1] = HPET_LEGACY_RTC; - if (ntimer > 2) { - struct hpet *hpet; - struct hpet_timer *timer; - int i; - - hpet = (struct hpet *) fix_to_virt(FIX_HPET_BASE); - timer = &hpet->hpet_timers[2]; - for (i = 2; i < ntimer; timer++, i++) - hd.hd_irq[i] = (timer->hpet_config & - Tn_INT_ROUTE_CNF_MASK) >> - Tn_INT_ROUTE_CNF_SHIFT; - - } - - hpet_alloc(&hd); - return 0; -} -fs_initcall(late_hpet_init); -#endif - -int hpet_timer_stop_set_go(unsigned long tick) -{ - unsigned int cfg; - -/* - * Stop the timers and reset the main counter. - */ - - cfg = hpet_readl(HPET_CFG); - cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY); - hpet_writel(cfg, HPET_CFG); - hpet_writel(0, HPET_COUNTER); - hpet_writel(0, HPET_COUNTER + 4); - -/* - * Set up timer 0, as periodic with first interrupt to happen at hpet_tick, - * and period also hpet_tick. - */ - if (hpet_use_timer) { - hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | - HPET_TN_32BIT, HPET_T0_CFG); - hpet_writel(hpet_tick, HPET_T0_CMP); /* next interrupt */ - hpet_writel(hpet_tick, HPET_T0_CMP); /* period */ - cfg |= HPET_CFG_LEGACY; - } -/* - * Go! - */ - - cfg |= HPET_CFG_ENABLE; - hpet_writel(cfg, HPET_CFG); - - return 0; -} - -static cycle_t read_hpet(void) -{ - return (cycle_t)hpet_readl(HPET_COUNTER); -} - -static cycle_t __vsyscall_fn vread_hpet(void) -{ - return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0); -} - -struct clocksource clocksource_hpet = { - .name = "hpet", - .rating = 250, - .read = read_hpet, - .mask = (cycle_t)HPET_MASK, - .mult = 0, /* set below */ - .shift = HPET_SHIFT, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .vread = vread_hpet, -}; - -int __init hpet_arch_init(void) -{ - unsigned int id; - u64 tmp; - - if (!hpet_address) - return -1; - set_fixmap_nocache(FIX_HPET_BASE, hpet_address); - __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); - -/* - * Read the period, compute tick and quotient. - */ - - id = hpet_readl(HPET_ID); - - if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER)) - return -1; - - hpet_period = hpet_readl(HPET_PERIOD); - if (hpet_period < 100000 || hpet_period > 100000000) - return -1; - - hpet_tick = (FSEC_PER_TICK + hpet_period / 2) / hpet_period; - - hpet_use_timer = (id & HPET_ID_LEGSUP); - - /* - * hpet period is in femto seconds per cycle - * so we need to convert this to ns/cyc units - * aproximated by mult/2^shift - * - * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift - * fsec/cyc * 1ns/1000000fsec * 2^shift = mult - * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult - * (fsec/cyc << shift)/1000000 = mult - * (hpet_period << shift)/FSEC_PER_NSEC = mult - */ - tmp = (u64)hpet_period << HPET_SHIFT; - do_div(tmp, FSEC_PER_NSEC); - clocksource_hpet.mult = (u32)tmp; - clocksource_register(&clocksource_hpet); - - return hpet_timer_stop_set_go(hpet_tick); -} - -int hpet_reenable(void) -{ - return hpet_timer_stop_set_go(hpet_tick); -} - -/* - * calibrate_tsc() calibrates the processor TSC in a very simple way, comparing - * it to the HPET timer of known frequency. - */ - -#define TICK_COUNT 100000000 -#define SMI_THRESHOLD 50000 -#define MAX_TRIES 5 - -/* - * Some platforms take periodic SMI interrupts with 5ms duration. Make sure none - * occurs between the reads of the hpet & TSC. - */ -static void __init read_hpet_tsc(int *hpet, int *tsc) -{ - int tsc1, tsc2, hpet1, i; - - for (i = 0; i < MAX_TRIES; i++) { - tsc1 = get_cycles_sync(); - hpet1 = hpet_readl(HPET_COUNTER); - tsc2 = get_cycles_sync(); - if ((tsc2 - tsc1) < SMI_THRESHOLD) - break; - } - *hpet = hpet1; - *tsc = tsc2; -} - -unsigned int __init hpet_calibrate_tsc(void) -{ - int tsc_start, hpet_start; - int tsc_now, hpet_now; - unsigned long flags; - - local_irq_save(flags); - - read_hpet_tsc(&hpet_start, &tsc_start); - - do { - local_irq_disable(); - read_hpet_tsc(&hpet_now, &tsc_now); - local_irq_restore(flags); - } while ((tsc_now - tsc_start) < TICK_COUNT && - (hpet_now - hpet_start) < TICK_COUNT); - - return (tsc_now - tsc_start) * 1000000000L - / ((hpet_now - hpet_start) * hpet_period / 1000); -} - -#ifdef CONFIG_HPET_EMULATE_RTC -/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET - * is enabled, we support RTC interrupt functionality in software. - * RTC has 3 kinds of interrupts: - * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock - * is updated - * 2) Alarm Interrupt - generate an interrupt at a specific time of day - * 3) Periodic Interrupt - generate periodic interrupt, with frequencies - * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2) - * (1) and (2) above are implemented using polling at a frequency of - * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt - * overhead. (DEFAULT_RTC_INT_FREQ) - * For (3), we use interrupts at 64Hz or user specified periodic - * frequency, whichever is higher. - */ -#include <linux/rtc.h> - -#define DEFAULT_RTC_INT_FREQ 64 -#define RTC_NUM_INTS 1 - -static unsigned long UIE_on; -static unsigned long prev_update_sec; - -static unsigned long AIE_on; -static struct rtc_time alarm_time; - -static unsigned long PIE_on; -static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ; -static unsigned long PIE_count; - -static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */ -static unsigned int hpet_t1_cmp; /* cached comparator register */ - -int is_hpet_enabled(void) -{ - return hpet_address != 0; -} - -/* - * Timer 1 for RTC, we do not use periodic interrupt feature, - * even if HPET supports periodic interrupts on Timer 1. - * The reason being, to set up a periodic interrupt in HPET, we need to - * stop the main counter. And if we do that everytime someone diables/enables - * RTC, we will have adverse effect on main kernel timer running on Timer 0. - * So, for the time being, simulate the periodic interrupt in software. - * - * hpet_rtc_timer_init() is called for the first time and during subsequent - * interuppts reinit happens through hpet_rtc_timer_reinit(). - */ -int hpet_rtc_timer_init(void) -{ - unsigned int cfg, cnt; - unsigned long flags; - - if (!is_hpet_enabled()) - return 0; - /* - * Set the counter 1 and enable the interrupts. - */ - if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) - hpet_rtc_int_freq = PIE_freq; - else - hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; - - local_irq_save(flags); - - cnt = hpet_readl(HPET_COUNTER); - cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq); - hpet_writel(cnt, HPET_T1_CMP); - hpet_t1_cmp = cnt; - - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_PERIODIC; - cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; - hpet_writel(cfg, HPET_T1_CFG); - - local_irq_restore(flags); - - return 1; -} - -static void hpet_rtc_timer_reinit(void) -{ - unsigned int cfg, cnt, ticks_per_int, lost_ints; - - if (unlikely(!(PIE_on | AIE_on | UIE_on))) { - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_ENABLE; - hpet_writel(cfg, HPET_T1_CFG); - return; - } - - if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) - hpet_rtc_int_freq = PIE_freq; - else - hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; - - /* It is more accurate to use the comparator value than current count.*/ - ticks_per_int = hpet_tick * HZ / hpet_rtc_int_freq; - hpet_t1_cmp += ticks_per_int; - hpet_writel(hpet_t1_cmp, HPET_T1_CMP); - - /* - * If the interrupt handler was delayed too long, the write above tries - * to schedule the next interrupt in the past and the hardware would - * not interrupt until the counter had wrapped around. - * So we have to check that the comparator wasn't set to a past time. - */ - cnt = hpet_readl(HPET_COUNTER); - if (unlikely((int)(cnt - hpet_t1_cmp) > 0)) { - lost_ints = (cnt - hpet_t1_cmp) / ticks_per_int + 1; - /* Make sure that, even with the time needed to execute - * this code, the next scheduled interrupt has been moved - * back to the future: */ - lost_ints++; - - hpet_t1_cmp += lost_ints * ticks_per_int; - hpet_writel(hpet_t1_cmp, HPET_T1_CMP); - - if (PIE_on) - PIE_count += lost_ints; - - if (printk_ratelimit()) - printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", - hpet_rtc_int_freq); - } -} - -/* - * The functions below are called from rtc driver. - * Return 0 if HPET is not being used. - * Otherwise do the necessary changes and return 1. - */ -int hpet_mask_rtc_irq_bit(unsigned long bit_mask) -{ - if (!is_hpet_enabled()) - return 0; - - if (bit_mask & RTC_UIE) - UIE_on = 0; - if (bit_mask & RTC_PIE) - PIE_on = 0; - if (bit_mask & RTC_AIE) - AIE_on = 0; - - return 1; -} - -int hpet_set_rtc_irq_bit(unsigned long bit_mask) -{ - int timer_init_reqd = 0; - - if (!is_hpet_enabled()) - return 0; - - if (!(PIE_on | AIE_on | UIE_on)) - timer_init_reqd = 1; - - if (bit_mask & RTC_UIE) { - UIE_on = 1; - } - if (bit_mask & RTC_PIE) { - PIE_on = 1; - PIE_count = 0; - } - if (bit_mask & RTC_AIE) { - AIE_on = 1; - } - - if (timer_init_reqd) - hpet_rtc_timer_init(); - - return 1; -} - -int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec) -{ - if (!is_hpet_enabled()) - return 0; - - alarm_time.tm_hour = hrs; - alarm_time.tm_min = min; - alarm_time.tm_sec = sec; - - return 1; -} - -int hpet_set_periodic_freq(unsigned long freq) -{ - if (!is_hpet_enabled()) - return 0; - - PIE_freq = freq; - PIE_count = 0; - - return 1; -} - -int hpet_rtc_dropped_irq(void) -{ - if (!is_hpet_enabled()) - return 0; - - return 1; -} - -irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) -{ - struct rtc_time curr_time; - unsigned long rtc_int_flag = 0; - int call_rtc_interrupt = 0; - - hpet_rtc_timer_reinit(); - - if (UIE_on | AIE_on) { - rtc_get_rtc_time(&curr_time); - } - if (UIE_on) { - if (curr_time.tm_sec != prev_update_sec) { - /* Set update int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag = RTC_UF; - prev_update_sec = curr_time.tm_sec; - } - } - if (PIE_on) { - PIE_count++; - if (PIE_count >= hpet_rtc_int_freq/PIE_freq) { - /* Set periodic int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag |= RTC_PF; - PIE_count = 0; - } - } - if (AIE_on) { - if ((curr_time.tm_sec == alarm_time.tm_sec) && - (curr_time.tm_min == alarm_time.tm_min) && - (curr_time.tm_hour == alarm_time.tm_hour)) { - /* Set alarm int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag |= RTC_AF; - } - } - if (call_rtc_interrupt) { - rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8)); - rtc_interrupt(rtc_int_flag, dev_id); - } - return IRQ_HANDLED; -} -#endif - -static int __init nohpet_setup(char *s) -{ - nohpet = 1; - return 1; -} - -__setup("nohpet", nohpet_setup); diff --git a/arch/x86_64/kernel/i387_64.c b/arch/x86_64/kernel/i387_64.c deleted file mode 100644 index 1d58c13bc6b..00000000000 --- a/arch/x86_64/kernel/i387_64.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * linux/arch/x86_64/kernel/i387.c - * - * Copyright (C) 1994 Linus Torvalds - * Copyright (C) 2002 Andi Kleen, SuSE Labs - * - * Pentium III FXSR, SSE support - * General FPU state handling cleanups - * Gareth Hughes <gareth@valinux.com>, May 2000 - * - * x86-64 rework 2002 Andi Kleen. - * Does direct fxsave in and out of user space now for signal handlers. - * All the FSAVE<->FXSAVE conversion code has been moved to the 32bit emulation, - * the 64bit user space sees a FXSAVE frame directly. - */ - -#include <linux/sched.h> -#include <linux/init.h> -#include <asm/processor.h> -#include <asm/i387.h> -#include <asm/sigcontext.h> -#include <asm/user.h> -#include <asm/ptrace.h> -#include <asm/uaccess.h> - -unsigned int mxcsr_feature_mask __read_mostly = 0xffffffff; - -void mxcsr_feature_mask_init(void) -{ - unsigned int mask; - clts(); - memset(¤t->thread.i387.fxsave, 0, sizeof(struct i387_fxsave_struct)); - asm volatile("fxsave %0" : : "m" (current->thread.i387.fxsave)); - mask = current->thread.i387.fxsave.mxcsr_mask; - if (mask == 0) mask = 0x0000ffbf; - mxcsr_feature_mask &= mask; - stts(); -} - -/* - * Called at bootup to set up the initial FPU state that is later cloned - * into all processes. - */ -void __cpuinit fpu_init(void) -{ - unsigned long oldcr0 = read_cr0(); - extern void __bad_fxsave_alignment(void); - - if (offsetof(struct task_struct, thread.i387.fxsave) & 15) - __bad_fxsave_alignment(); - set_in_cr4(X86_CR4_OSFXSR); - set_in_cr4(X86_CR4_OSXMMEXCPT); - - write_cr0(oldcr0 & ~((1UL<<3)|(1UL<<2))); /* clear TS and EM */ - - mxcsr_feature_mask_init(); - /* clean state in init */ - current_thread_info()->status = 0; - clear_used_math(); -} - -void init_fpu(struct task_struct *child) -{ - if (tsk_used_math(child)) { - if (child == current) - unlazy_fpu(child); - return; - } - memset(&child->thread.i387.fxsave, 0, sizeof(struct i387_fxsave_struct)); - child->thread.i387.fxsave.cwd = 0x37f; - child->thread.i387.fxsave.mxcsr = 0x1f80; - /* only the device not available exception or ptrace can call init_fpu */ - set_stopped_child_used_math(child); -} - -/* - * Signal frame handlers. - */ - -int save_i387(struct _fpstate __user *buf) -{ - struct task_struct *tsk = current; - int err = 0; - - BUILD_BUG_ON(sizeof(struct user_i387_struct) != - sizeof(tsk->thread.i387.fxsave)); - - if ((unsigned long)buf % 16) - printk("save_i387: bad fpstate %p\n",buf); - - if (!used_math()) - return 0; - clear_used_math(); /* trigger finit */ - if (task_thread_info(tsk)->status & TS_USEDFPU) { - err = save_i387_checking((struct i387_fxsave_struct __user *)buf); - if (err) return err; - stts(); - } else { - if (__copy_to_user(buf, &tsk->thread.i387.fxsave, - sizeof(struct i387_fxsave_struct))) - return -1; - } - return 1; -} - -/* - * ptrace request handlers. - */ - -int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *tsk) -{ - init_fpu(tsk); - return __copy_to_user(buf, &tsk->thread.i387.fxsave, - sizeof(struct user_i387_struct)) ? -EFAULT : 0; -} - -int set_fpregs(struct task_struct *tsk, struct user_i387_struct __user *buf) -{ - if (__copy_from_user(&tsk->thread.i387.fxsave, buf, - sizeof(struct user_i387_struct))) - return -EFAULT; - return 0; -} - -/* - * FPU state for core dumps. - */ - -int dump_fpu( struct pt_regs *regs, struct user_i387_struct *fpu ) -{ - struct task_struct *tsk = current; - - if (!used_math()) - return 0; - - unlazy_fpu(tsk); - memcpy(fpu, &tsk->thread.i387.fxsave, sizeof(struct user_i387_struct)); - return 1; -} - -int dump_task_fpu(struct task_struct *tsk, struct user_i387_struct *fpu) -{ - int fpvalid = !!tsk_used_math(tsk); - - if (fpvalid) { - if (tsk == current) - unlazy_fpu(tsk); - memcpy(fpu, &tsk->thread.i387.fxsave, sizeof(struct user_i387_struct)); -} - return fpvalid; -} diff --git a/arch/x86_64/kernel/i8259_64.c b/arch/x86_64/kernel/i8259_64.c deleted file mode 100644 index 948cae64609..00000000000 --- a/arch/x86_64/kernel/i8259_64.c +++ /dev/null @@ -1,544 +0,0 @@ -#include <linux/linkage.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/sysdev.h> -#include <linux/bitops.h> - -#include <asm/acpi.h> -#include <asm/atomic.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/hw_irq.h> -#include <asm/pgtable.h> -#include <asm/delay.h> -#include <asm/desc.h> -#include <asm/apic.h> - -/* - * Common place to define all x86 IRQ vectors - * - * This builds up the IRQ handler stubs using some ugly macros in irq.h - * - * These macros create the low-level assembly IRQ routines that save - * register context and call do_IRQ(). do_IRQ() then does all the - * operations that are needed to keep the AT (or SMP IOAPIC) - * interrupt-controller happy. - */ - -#define BI(x,y) \ - BUILD_IRQ(x##y) - -#define BUILD_16_IRQS(x) \ - BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ - BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ - BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ - BI(x,c) BI(x,d) BI(x,e) BI(x,f) - -/* - * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: - * (these are usually mapped to vectors 0x30-0x3f) - */ - -/* - * The IO-APIC gives us many more interrupt sources. Most of these - * are unused but an SMP system is supposed to have enough memory ... - * sometimes (mostly wrt. hw bugs) we get corrupted vectors all - * across the spectrum, so we really want to be prepared to get all - * of these. Plus, more powerful systems might have more than 64 - * IO-APIC registers. - * - * (these are usually mapped into the 0x30-0xff vector range) - */ - BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) -BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) -BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) -BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) - -#undef BUILD_16_IRQS -#undef BI - - -#define IRQ(x,y) \ - IRQ##x##y##_interrupt - -#define IRQLIST_16(x) \ - IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ - IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ - IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ - IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) - -/* for the irq vectors */ -static void (*interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { - IRQLIST_16(0x2), IRQLIST_16(0x3), - IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), - IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), - IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) -}; - -#undef IRQ -#undef IRQLIST_16 - -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - * this file should become arch/i386/kernel/irq.c when the old irq.c - * moves to arch independent land - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -static unsigned int cached_irq_mask = 0xffff; - -#define __byte(x,y) (((unsigned char *)&(y))[x]) -#define cached_21 (__byte(0,cached_irq_mask)) -#define cached_A1 (__byte(1,cached_irq_mask)) - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_A1,0xA1); - else - outb(cached_21,0x21); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_A1,0xA1); - else - outb(cached_21,0x21); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<<irq; - unsigned long flags; - int ret; - - spin_lock_irqsave(&i8259A_lock, flags); - if (irq < 8) - ret = inb(0x20) & mask; - else - ret = inb(0xA0) & (mask >> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<<irq); - set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq, - "XT"); - enable_irq(irq); -} - -/* - * This function assumes to be called rarely. Switching between - * 8259A registers is slow. - * This has to be protected by the irq controller spinlock - * before being called. - */ -static inline int i8259A_irq_real(unsigned int irq) -{ - int value; - int irqmask = 1<<irq; - - if (irq < 8) { - outb(0x0B,0x20); /* ISR register */ - value = inb(0x20) & irqmask; - outb(0x0A,0x20); /* back to the IRR register */ - return value; - } - outb(0x0B,0xA0); /* ISR register */ - value = inb(0xA0) & (irqmask >> 8); - outb(0x0A,0xA0); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; - -handle_real_irq: - if (irq & 8) { - inb(0xA1); /* DUMMY - (do we need this?) */ - outb(cached_A1,0xA1); - outb(0x60+(irq&7),0xA0);/* 'Specific EOI' to slave */ - outb(0x62,0x20); /* 'Specific EOI' to master-IRQ2 */ - } else { - inb(0x21); /* DUMMY - (do we need this?) */ - outb(cached_21,0x21); - outb(0x60+irq,0x20); /* 'Specific EOI' to master */ - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, 0x21); /* mask all of 8259A-1 */ - outb(0xff, 0xA1); /* mask all of 8259A-2 */ - - /* - * outb_p - this has to work on a wide range of PC hardware. - */ - outb_p(0x11, 0x20); /* ICW1: select 8259A-1 init */ - outb_p(IRQ0_VECTOR, 0x21); /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ - outb_p(0x04, 0x21); /* 8259A-1 (the master) has a slave on IR2 */ - if (auto_eoi) - outb_p(0x03, 0x21); /* master does Auto EOI */ - else - outb_p(0x01, 0x21); /* master expects normal EOI */ - - outb_p(0x11, 0xA0); /* ICW1: select 8259A-2 init */ - outb_p(IRQ8_VECTOR, 0xA1); /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ - outb_p(0x02, 0xA1); /* 8259A-2 is a slave on master's IR2 */ - outb_p(0x01, 0xA1); /* (slave's support for AEOI in flat mode - is to be investigated) */ - - if (auto_eoi) - /* - * in AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_21, 0x21); /* restore master IRQ mask */ - outb(cached_A1, 0xA1); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, 0x21); /* mask all of 8259A-1 */ - outb(0xff, 0xA1); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - set_kset_name("i8259"), - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ - -static struct irqaction irq2 = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL}; -DEFINE_PER_CPU(vector_irq_t, vector_irq) = { - [0 ... IRQ0_VECTOR - 1] = -1, - [IRQ0_VECTOR] = 0, - [IRQ1_VECTOR] = 1, - [IRQ2_VECTOR] = 2, - [IRQ3_VECTOR] = 3, - [IRQ4_VECTOR] = 4, - [IRQ5_VECTOR] = 5, - [IRQ6_VECTOR] = 6, - [IRQ7_VECTOR] = 7, - [IRQ8_VECTOR] = 8, - [IRQ9_VECTOR] = 9, - [IRQ10_VECTOR] = 10, - [IRQ11_VECTOR] = 11, - [IRQ12_VECTOR] = 12, - [IRQ13_VECTOR] = 13, - [IRQ14_VECTOR] = 14, - [IRQ15_VECTOR] = 15, - [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 -}; - -void __init init_ISA_irqs (void) -{ - int i; - - init_bsp_APIC(); - init_8259A(0); - - for (i = 0; i < NR_IRQS; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - - if (i < 16) { - /* - * 16 old-style INTA-cycle interrupts: - */ - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } else { - /* - * 'high' PCI IRQs filled in on demand - */ - irq_desc[i].chip = &no_irq_chip; - } - } -} - -static void setup_timer_hardware(void) -{ - outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */ - udelay(10); - outb_p(LATCH & 0xff , 0x40); /* LSB */ - udelay(10); - outb(LATCH >> 8 , 0x40); /* MSB */ -} - -static int timer_resume(struct sys_device *dev) -{ - setup_timer_hardware(); - return 0; -} - -void i8254_timer_resume(void) -{ - setup_timer_hardware(); -} - -static struct sysdev_class timer_sysclass = { - set_kset_name("timer_pit"), - .resume = timer_resume, -}; - -static struct sys_device device_timer = { - .id = 0, - .cls = &timer_sysclass, -}; - -static int __init init_timer_sysfs(void) -{ - int error = sysdev_class_register(&timer_sysclass); - if (!error) - error = sysdev_register(&device_timer); - return error; -} - -device_initcall(init_timer_sysfs); - -void __init init_IRQ(void) -{ - int i; - - init_ISA_irqs(); - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (vector != IA32_SYSCALL_VECTOR) - set_intr_gate(vector, interrupt[i]); - } - -#ifdef CONFIG_SMP - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPIs for invalidation */ - set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); - - /* IPI for generic function call */ - set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* Low priority IPI to cleanup after moving an irq */ - set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); -#endif - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); - set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); - - /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - - /* - * Set the clock to HZ Hz, we already have a valid - * vector now: - */ - setup_timer_hardware(); - - if (!acpi_ioapic) - setup_irq(2, &irq2); -} diff --git a/arch/x86_64/kernel/init_task_64.c b/arch/x86_64/kernel/init_task_64.c deleted file mode 100644 index 4ff33d4f855..00000000000 --- a/arch/x86_64/kernel/init_task_64.c +++ /dev/null @@ -1,54 +0,0 @@ -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/init_task.h> -#include <linux/fs.h> -#include <linux/mqueue.h> - -#include <asm/uaccess.h> -#include <asm/pgtable.h> -#include <asm/desc.h> - -static struct fs_struct init_fs = INIT_FS; -static struct files_struct init_files = INIT_FILES; -static struct signal_struct init_signals = INIT_SIGNALS(init_signals); -static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); -struct mm_struct init_mm = INIT_MM(init_mm); - -EXPORT_SYMBOL(init_mm); - -/* - * Initial task structure. - * - * We need to make sure that this is 8192-byte aligned due to the - * way process stacks are handled. This is done by having a special - * "init_task" linker map entry.. - */ -union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = - { INIT_THREAD_INFO(init_task) }; - -/* - * Initial task structure. - * - * All other task structs will be allocated on slabs in fork.c - */ -struct task_struct init_task = INIT_TASK(init_task); - -EXPORT_SYMBOL(init_task); -/* - * per-CPU TSS segments. Threads are completely 'soft' on Linux, - * no more per-task TSS's. The TSS size is kept cacheline-aligned - * so they are allowed to end up in the .data.cacheline_aligned - * section. Since TSS's are completely CPU-local, we want them - * on exact cacheline boundaries, to eliminate cacheline ping-pong. - */ -DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss) = INIT_TSS; - -/* Copies of the original ist values from the tss are only accessed during - * debugging, no special alignment required. - */ -DEFINE_PER_CPU(struct orig_ist, orig_ist); - -#define ALIGN_TO_4K __attribute__((section(".data.init_task"))) diff --git a/arch/x86_64/kernel/io_apic_64.c b/arch/x86_64/kernel/io_apic_64.c deleted file mode 100644 index 966fa106249..00000000000 --- a/arch/x86_64/kernel/io_apic_64.c +++ /dev/null @@ -1,2202 +0,0 @@ -/* - * Intel IO-APIC support for multi-Pentium hosts. - * - * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo - * - * Many thanks to Stig Venaas for trying out countless experimental - * patches and reporting/debugging problems patiently! - * - * (c) 1999, Multiple IO-APIC support, developed by - * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and - * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>, - * further tested and cleaned up by Zach Brown <zab@redhat.com> - * and Ingo Molnar <mingo@redhat.com> - * - * Fixes - * Maciej W. Rozycki : Bits for genuine 82489DX APICs; - * thanks to Eric Gilmore - * and Rolf G. Tews - * for testing these extensively - * Paul Diefenbaugh : Added full ACPI support - */ - -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/pci.h> -#include <linux/mc146818rtc.h> -#include <linux/acpi.h> -#include <linux/sysdev.h> -#include <linux/msi.h> -#include <linux/htirq.h> -#ifdef CONFIG_ACPI -#include <acpi/acpi_bus.h> -#endif - -#include <asm/idle.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/desc.h> -#include <asm/proto.h> -#include <asm/mach_apic.h> -#include <asm/acpi.h> -#include <asm/dma.h> -#include <asm/nmi.h> -#include <asm/msidef.h> -#include <asm/hypertransport.h> - -struct irq_cfg { - cpumask_t domain; - cpumask_t old_domain; - unsigned move_cleanup_count; - u8 vector; - u8 move_in_progress : 1; -}; - -/* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */ -struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = { - [0] = { .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR, }, - [1] = { .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR, }, - [2] = { .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR, }, - [3] = { .domain = CPU_MASK_ALL, .vector = IRQ3_VECTOR, }, - [4] = { .domain = CPU_MASK_ALL, .vector = IRQ4_VECTOR, }, - [5] = { .domain = CPU_MASK_ALL, .vector = IRQ5_VECTOR, }, - [6] = { .domain = CPU_MASK_ALL, .vector = IRQ6_VECTOR, }, - [7] = { .domain = CPU_MASK_ALL, .vector = IRQ7_VECTOR, }, - [8] = { .domain = CPU_MASK_ALL, .vector = IRQ8_VECTOR, }, - [9] = { .domain = CPU_MASK_ALL, .vector = IRQ9_VECTOR, }, - [10] = { .domain = CPU_MASK_ALL, .vector = IRQ10_VECTOR, }, - [11] = { .domain = CPU_MASK_ALL, .vector = IRQ11_VECTOR, }, - [12] = { .domain = CPU_MASK_ALL, .vector = IRQ12_VECTOR, }, - [13] = { .domain = CPU_MASK_ALL, .vector = IRQ13_VECTOR, }, - [14] = { .domain = CPU_MASK_ALL, .vector = IRQ14_VECTOR, }, - [15] = { .domain = CPU_MASK_ALL, .vector = IRQ15_VECTOR, }, -}; - -static int assign_irq_vector(int irq, cpumask_t mask); - -#define __apicdebuginit __init - -int sis_apic_bug; /* not actually supported, dummy for compile */ - -static int no_timer_check; - -static int disable_timer_pin_1 __initdata; - -int timer_over_8254 __initdata = 1; - -/* Where if anywhere is the i8259 connect in external int mode */ -static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; - -static DEFINE_SPINLOCK(ioapic_lock); -DEFINE_SPINLOCK(vector_lock); - -/* - * # of IRQ routing registers - */ -int nr_ioapic_registers[MAX_IO_APICS]; - -/* - * Rough estimation of how many shared IRQs there are, can - * be changed anytime. - */ -#define MAX_PLUS_SHARED_IRQS NR_IRQS -#define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS) - -/* - * This is performance-critical, we want to do it O(1) - * - * the indexing order of this array favors 1:1 mappings - * between pins and IRQs. - */ - -static struct irq_pin_list { - short apic, pin, next; -} irq_2_pin[PIN_MAP_SIZE]; - -struct io_apic { - unsigned int index; - unsigned int unused[3]; - unsigned int data; -}; - -static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) -{ - return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) - + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK); -} - -static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) -{ - struct io_apic __iomem *io_apic = io_apic_base(apic); - writel(reg, &io_apic->index); - return readl(&io_apic->data); -} - -static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value) -{ - struct io_apic __iomem *io_apic = io_apic_base(apic); - writel(reg, &io_apic->index); - writel(value, &io_apic->data); -} - -/* - * Re-write a value: to be used for read-modify-write - * cycles where the read already set up the index register. - */ -static inline void io_apic_modify(unsigned int apic, unsigned int value) -{ - struct io_apic __iomem *io_apic = io_apic_base(apic); - writel(value, &io_apic->data); -} - -static int io_apic_level_ack_pending(unsigned int irq) -{ - struct irq_pin_list *entry; - unsigned long flags; - int pending = 0; - - spin_lock_irqsave(&ioapic_lock, flags); - entry = irq_2_pin + irq; - for (;;) { - unsigned int reg; - int pin; - - pin = entry->pin; - if (pin == -1) - break; - reg = io_apic_read(entry->apic, 0x10 + pin*2); - /* Is the remote IRR bit set? */ - pending |= (reg >> 14) & 1; - if (!entry->next) - break; - entry = irq_2_pin + entry->next; - } - spin_unlock_irqrestore(&ioapic_lock, flags); - return pending; -} - -/* - * Synchronize the IO-APIC and the CPU by doing - * a dummy read from the IO-APIC - */ -static inline void io_apic_sync(unsigned int apic) -{ - struct io_apic __iomem *io_apic = io_apic_base(apic); - readl(&io_apic->data); -} - -#define __DO_ACTION(R, ACTION, FINAL) \ - \ -{ \ - int pin; \ - struct irq_pin_list *entry = irq_2_pin + irq; \ - \ - BUG_ON(irq >= NR_IRQS); \ - for (;;) { \ - unsigned int reg; \ - pin = entry->pin; \ - if (pin == -1) \ - break; \ - reg = io_apic_read(entry->apic, 0x10 + R + pin*2); \ - reg ACTION; \ - io_apic_modify(entry->apic, reg); \ - FINAL; \ - if (!entry->next) \ - break; \ - entry = irq_2_pin + entry->next; \ - } \ -} - -union entry_union { - struct { u32 w1, w2; }; - struct IO_APIC_route_entry entry; -}; - -static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) -{ - union entry_union eu; - unsigned long flags; - spin_lock_irqsave(&ioapic_lock, flags); - eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); - eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); - spin_unlock_irqrestore(&ioapic_lock, flags); - return eu.entry; -} - -/* - * When we write a new IO APIC routing entry, we need to write the high - * word first! If the mask bit in the low word is clear, we will enable - * the interrupt, and we need to make sure the entry is fully populated - * before that happens. - */ -static void -__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) -{ - union entry_union eu; - eu.entry = e; - io_apic_write(apic, 0x11 + 2*pin, eu.w2); - io_apic_write(apic, 0x10 + 2*pin, eu.w1); -} - -static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) -{ - unsigned long flags; - spin_lock_irqsave(&ioapic_lock, flags); - __ioapic_write_entry(apic, pin, e); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -/* - * When we mask an IO APIC routing entry, we need to write the low - * word first, in order to set the mask bit before we change the - * high bits! - */ -static void ioapic_mask_entry(int apic, int pin) -{ - unsigned long flags; - union entry_union eu = { .entry.mask = 1 }; - - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x10 + 2*pin, eu.w1); - io_apic_write(apic, 0x11 + 2*pin, eu.w2); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -#ifdef CONFIG_SMP -static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector) -{ - int apic, pin; - struct irq_pin_list *entry = irq_2_pin + irq; - - BUG_ON(irq >= NR_IRQS); - for (;;) { - unsigned int reg; - apic = entry->apic; - pin = entry->pin; - if (pin == -1) - break; - io_apic_write(apic, 0x11 + pin*2, dest); - reg = io_apic_read(apic, 0x10 + pin*2); - reg &= ~0x000000ff; - reg |= vector; - io_apic_modify(apic, reg); - if (!entry->next) - break; - entry = irq_2_pin + entry->next; - } -} - -static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) -{ - struct irq_cfg *cfg = irq_cfg + irq; - unsigned long flags; - unsigned int dest; - cpumask_t tmp; - - cpus_and(tmp, mask, cpu_online_map); - if (cpus_empty(tmp)) - return; - - if (assign_irq_vector(irq, mask)) - return; - - cpus_and(tmp, cfg->domain, mask); - dest = cpu_mask_to_apicid(tmp); - - /* - * Only the high 8 bits are valid. - */ - dest = SET_APIC_LOGICAL_ID(dest); - - spin_lock_irqsave(&ioapic_lock, flags); - __target_IO_APIC_irq(irq, dest, cfg->vector); - irq_desc[irq].affinity = mask; - spin_unlock_irqrestore(&ioapic_lock, flags); -} -#endif - -/* - * The common case is 1:1 IRQ<->pin mappings. Sometimes there are - * shared ISA-space IRQs, so we have to support them. We are super - * fast in the common case, and fast for shared ISA-space IRQs. - */ -static void add_pin_to_irq(unsigned int irq, int apic, int pin) -{ - static int first_free_entry = NR_IRQS; - struct irq_pin_list *entry = irq_2_pin + irq; - - BUG_ON(irq >= NR_IRQS); - while (entry->next) - entry = irq_2_pin + entry->next; - - if (entry->pin != -1) { - entry->next = first_free_entry; - entry = irq_2_pin + entry->next; - if (++first_free_entry >= PIN_MAP_SIZE) - panic("io_apic.c: ran out of irq_2_pin entries!"); - } - entry->apic = apic; - entry->pin = pin; -} - - -#define DO_ACTION(name,R,ACTION, FINAL) \ - \ - static void name##_IO_APIC_irq (unsigned int irq) \ - __DO_ACTION(R, ACTION, FINAL) - -DO_ACTION( __mask, 0, |= 0x00010000, io_apic_sync(entry->apic) ) - /* mask = 1 */ -DO_ACTION( __unmask, 0, &= 0xfffeffff, ) - /* mask = 0 */ - -static void mask_IO_APIC_irq (unsigned int irq) -{ - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - __mask_IO_APIC_irq(irq); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -static void unmask_IO_APIC_irq (unsigned int irq) -{ - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - __unmask_IO_APIC_irq(irq); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) -{ - struct IO_APIC_route_entry entry; - - /* Check delivery_mode to be sure we're not clearing an SMI pin */ - entry = ioapic_read_entry(apic, pin); - if (entry.delivery_mode == dest_SMI) - return; - /* - * Disable it in the IO-APIC irq-routing table: - */ - ioapic_mask_entry(apic, pin); -} - -static void clear_IO_APIC (void) -{ - int apic, pin; - - for (apic = 0; apic < nr_ioapics; apic++) - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) - clear_IO_APIC_pin(apic, pin); -} - -int skip_ioapic_setup; -int ioapic_force; - -static int __init parse_noapic(char *str) -{ - disable_ioapic_setup(); - return 0; -} -early_param("noapic", parse_noapic); - -/* Actually the next is obsolete, but keep it for paranoid reasons -AK */ -static int __init disable_timer_pin_setup(char *arg) -{ - disable_timer_pin_1 = 1; - return 1; -} -__setup("disable_timer_pin_1", disable_timer_pin_setup); - -static int __init setup_disable_8254_timer(char *s) -{ - timer_over_8254 = -1; - return 1; -} -static int __init setup_enable_8254_timer(char *s) -{ - timer_over_8254 = 2; - return 1; -} - -__setup("disable_8254_timer", setup_disable_8254_timer); -__setup("enable_8254_timer", setup_enable_8254_timer); - - -/* - * Find the IRQ entry number of a certain pin. - */ -static int find_irq_entry(int apic, int pin, int type) -{ - int i; - - for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && - mp_irqs[i].mpc_dstirq == pin) - return i; - - return -1; -} - -/* - * Find the pin to which IRQ[irq] (ISA) is connected - */ -static int __init find_isa_irq_pin(int irq, int type) -{ - int i; - - for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; - - if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) - - return mp_irqs[i].mpc_dstirq; - } - return -1; -} - -static int __init find_isa_irq_apic(int irq, int type) -{ - int i; - - for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; - - if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) - break; - } - if (i < mp_irq_entries) { - int apic; - for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) - return apic; - } - } - - return -1; -} - -/* - * Find a specific PCI IRQ entry. - * Not an __init, possibly needed by modules - */ -static int pin_2_irq(int idx, int apic, int pin); - -int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) -{ - int apic, i, best_guess = -1; - - apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", - bus, slot, pin); - if (mp_bus_id_to_pci_bus[bus] == -1) { - apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus); - return -1; - } - for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; - - for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) - break; - - if (!test_bit(lbus, mp_bus_not_pci) && - !mp_irqs[i].mpc_irqtype && - (bus == lbus) && - (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); - - if (!(apic || IO_APIC_IRQ(irq))) - continue; - - if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) - return irq; - /* - * Use the first all-but-pin matching entry as a - * best-guess fuzzy result for broken mptables. - */ - if (best_guess < 0) - best_guess = irq; - } - } - BUG_ON(best_guess >= NR_IRQS); - return best_guess; -} - -/* ISA interrupts are always polarity zero edge triggered, - * when listed as conforming in the MP table. */ - -#define default_ISA_trigger(idx) (0) -#define default_ISA_polarity(idx) (0) - -/* PCI interrupts are always polarity one level triggered, - * when listed as conforming in the MP table. */ - -#define default_PCI_trigger(idx) (1) -#define default_PCI_polarity(idx) (1) - -static int __init MPBIOS_polarity(int idx) -{ - int bus = mp_irqs[idx].mpc_srcbus; - int polarity; - - /* - * Determine IRQ line polarity (high active or low active): - */ - switch (mp_irqs[idx].mpc_irqflag & 3) - { - case 0: /* conforms, ie. bus-type dependent polarity */ - if (test_bit(bus, mp_bus_not_pci)) - polarity = default_ISA_polarity(idx); - else - polarity = default_PCI_polarity(idx); - break; - case 1: /* high active */ - { - polarity = 0; - break; - } - case 2: /* reserved */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - case 3: /* low active */ - { - polarity = 1; - break; - } - default: /* invalid */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - } - return polarity; -} - -static int MPBIOS_trigger(int idx) -{ - int bus = mp_irqs[idx].mpc_srcbus; - int trigger; - - /* - * Determine IRQ trigger mode (edge or level sensitive): - */ - switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) - { - case 0: /* conforms, ie. bus-type dependent */ - if (test_bit(bus, mp_bus_not_pci)) - trigger = default_ISA_trigger(idx); - else - trigger = default_PCI_trigger(idx); - break; - case 1: /* edge */ - { - trigger = 0; - break; - } - case 2: /* reserved */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; - break; - } - case 3: /* level */ - { - trigger = 1; - break; - } - default: /* invalid */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 0; - break; - } - } - return trigger; -} - -static inline int irq_polarity(int idx) -{ - return MPBIOS_polarity(idx); -} - -static inline int irq_trigger(int idx) -{ - return MPBIOS_trigger(idx); -} - -static int pin_2_irq(int idx, int apic, int pin) -{ - int irq, i; - int bus = mp_irqs[idx].mpc_srcbus; - - /* - * Debugging check, we are in big trouble if this message pops up! - */ - if (mp_irqs[idx].mpc_dstirq != pin) - printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); - - if (test_bit(bus, mp_bus_not_pci)) { - irq = mp_irqs[idx].mpc_srcbusirq; - } else { - /* - * PCI IRQs are mapped in order - */ - i = irq = 0; - while (i < apic) - irq += nr_ioapic_registers[i++]; - irq += pin; - } - BUG_ON(irq >= NR_IRQS); - return irq; -} - -static int __assign_irq_vector(int irq, cpumask_t mask) -{ - /* - * NOTE! The local APIC isn't very good at handling - * multiple interrupts at the same interrupt level. - * As the interrupt level is determined by taking the - * vector number and shifting that right by 4, we - * want to spread these out a bit so that they don't - * all fall in the same interrupt level. - * - * Also, we've got to be careful not to trash gate - * 0x80, because int 0x80 is hm, kind of importantish. ;) - */ - static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0; - unsigned int old_vector; - int cpu; - struct irq_cfg *cfg; - - BUG_ON((unsigned)irq >= NR_IRQS); - cfg = &irq_cfg[irq]; - - /* Only try and allocate irqs on cpus that are present */ - cpus_and(mask, mask, cpu_online_map); - - if ((cfg->move_in_progress) || cfg->move_cleanup_count) - return -EBUSY; - - old_vector = cfg->vector; - if (old_vector) { - cpumask_t tmp; - cpus_and(tmp, cfg->domain, mask); - if (!cpus_empty(tmp)) - return 0; - } - - for_each_cpu_mask(cpu, mask) { - cpumask_t domain, new_mask; - int new_cpu; - int vector, offset; - - domain = vector_allocation_domain(cpu); - cpus_and(new_mask, domain, cpu_online_map); - - vector = current_vector; - offset = current_offset; -next: - vector += 8; - if (vector >= FIRST_SYSTEM_VECTOR) { - /* If we run out of vectors on large boxen, must share them. */ - offset = (offset + 1) % 8; - vector = FIRST_DEVICE_VECTOR + offset; - } - if (unlikely(current_vector == vector)) - continue; - if (vector == IA32_SYSCALL_VECTOR) - goto next; - for_each_cpu_mask(new_cpu, new_mask) - if (per_cpu(vector_irq, new_cpu)[vector] != -1) - goto next; - /* Found one! */ - current_vector = vector; - current_offset = offset; - if (old_vector) { - cfg->move_in_progress = 1; - cfg->old_domain = cfg->domain; - } - for_each_cpu_mask(new_cpu, new_mask) - per_cpu(vector_irq, new_cpu)[vector] = irq; - cfg->vector = vector; - cfg->domain = domain; - return 0; - } - return -ENOSPC; -} - -static int assign_irq_vector(int irq, cpumask_t mask) -{ - int err; - unsigned long flags; - - spin_lock_irqsave(&vector_lock, flags); - err = __assign_irq_vector(irq, mask); - spin_unlock_irqrestore(&vector_lock, flags); - return err; -} - -static void __clear_irq_vector(int irq) -{ - struct irq_cfg *cfg; - cpumask_t mask; - int cpu, vector; - - BUG_ON((unsigned)irq >= NR_IRQS); - cfg = &irq_cfg[irq]; - BUG_ON(!cfg->vector); - - vector = cfg->vector; - cpus_and(mask, cfg->domain, cpu_online_map); - for_each_cpu_mask(cpu, mask) - per_cpu(vector_irq, cpu)[vector] = -1; - - cfg->vector = 0; - cfg->domain = CPU_MASK_NONE; -} - -void __setup_vector_irq(int cpu) -{ - /* Initialize vector_irq on a new cpu */ - /* This function must be called with vector_lock held */ - int irq, vector; - - /* Mark the inuse vectors */ - for (irq = 0; irq < NR_IRQS; ++irq) { - if (!cpu_isset(cpu, irq_cfg[irq].domain)) - continue; - vector = irq_cfg[irq].vector; - per_cpu(vector_irq, cpu)[vector] = irq; - } - /* Mark the free vectors */ - for (vector = 0; vector < NR_VECTORS; ++vector) { - irq = per_cpu(vector_irq, cpu)[vector]; - if (irq < 0) - continue; - if (!cpu_isset(cpu, irq_cfg[irq].domain)) - per_cpu(vector_irq, cpu)[vector] = -1; - } -} - - -static struct irq_chip ioapic_chip; - -static void ioapic_register_intr(int irq, unsigned long trigger) -{ - if (trigger) { - irq_desc[irq].status |= IRQ_LEVEL; - set_irq_chip_and_handler_name(irq, &ioapic_chip, - handle_fasteoi_irq, "fasteoi"); - } else { - irq_desc[irq].status &= ~IRQ_LEVEL; - set_irq_chip_and_handler_name(irq, &ioapic_chip, - handle_edge_irq, "edge"); - } -} - -static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, - int trigger, int polarity) -{ - struct irq_cfg *cfg = irq_cfg + irq; - struct IO_APIC_route_entry entry; - cpumask_t mask; - - if (!IO_APIC_IRQ(irq)) - return; - - mask = TARGET_CPUS; - if (assign_irq_vector(irq, mask)) - return; - - cpus_and(mask, cfg->domain, mask); - - apic_printk(APIC_VERBOSE,KERN_DEBUG - "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> " - "IRQ %d Mode:%i Active:%i)\n", - apic, mp_ioapics[apic].mpc_apicid, pin, cfg->vector, - irq, trigger, polarity); - - /* - * add it to the IO-APIC irq-routing table: - */ - memset(&entry,0,sizeof(entry)); - - entry.delivery_mode = INT_DELIVERY_MODE; - entry.dest_mode = INT_DEST_MODE; - entry.dest = cpu_mask_to_apicid(mask); - entry.mask = 0; /* enable IRQ */ - entry.trigger = trigger; - entry.polarity = polarity; - entry.vector = cfg->vector; - - /* Mask level triggered irqs. - * Use IRQ_DELAYED_DISABLE for edge triggered irqs. - */ - if (trigger) - entry.mask = 1; - - ioapic_register_intr(irq, trigger); - if (irq < 16) - disable_8259A_irq(irq); - - ioapic_write_entry(apic, pin, entry); -} - -static void __init setup_IO_APIC_irqs(void) -{ - int apic, pin, idx, irq, first_notcon = 1; - - apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); - - for (apic = 0; apic < nr_ioapics; apic++) { - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - - idx = find_irq_entry(apic,pin,mp_INT); - if (idx == -1) { - if (first_notcon) { - apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin); - first_notcon = 0; - } else - apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mpc_apicid, pin); - continue; - } - - irq = pin_2_irq(idx, apic, pin); - add_pin_to_irq(irq, apic, pin); - - setup_IO_APIC_irq(apic, pin, irq, - irq_trigger(idx), irq_polarity(idx)); - } - } - - if (!first_notcon) - apic_printk(APIC_VERBOSE," not connected.\n"); -} - -/* - * Set up the 8259A-master output pin as broadcast to all - * CPUs. - */ -static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) -{ - struct IO_APIC_route_entry entry; - unsigned long flags; - - memset(&entry,0,sizeof(entry)); - - disable_8259A_irq(0); - - /* mask LVT0 */ - apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); - - /* - * We use logical delivery to get the timer IRQ - * to the first CPU. - */ - entry.dest_mode = INT_DEST_MODE; - entry.mask = 0; /* unmask IRQ now */ - entry.dest = cpu_mask_to_apicid(TARGET_CPUS); - entry.delivery_mode = INT_DELIVERY_MODE; - entry.polarity = 0; - entry.trigger = 0; - entry.vector = vector; - - /* - * The timer IRQ doesn't have to know that behind the - * scene we have a 8259A-master in AEOI mode ... - */ - set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge"); - - /* - * Add it to the IO-APIC irq-routing table: - */ - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); - io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); - spin_unlock_irqrestore(&ioapic_lock, flags); - - enable_8259A_irq(0); -} - -void __apicdebuginit print_IO_APIC(void) -{ - int apic, i; - union IO_APIC_reg_00 reg_00; - union IO_APIC_reg_01 reg_01; - union IO_APIC_reg_02 reg_02; - unsigned long flags; - - if (apic_verbosity == APIC_QUIET) - return; - - printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); - for (i = 0; i < nr_ioapics; i++) - printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", - mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); - - /* - * We are a bit conservative about what we expect. We have to - * know about every hardware change ASAP. - */ - printk(KERN_INFO "testing the IO APIC.......................\n"); - - for (apic = 0; apic < nr_ioapics; apic++) { - - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic, 0); - reg_01.raw = io_apic_read(apic, 1); - if (reg_01.bits.version >= 0x10) - reg_02.raw = io_apic_read(apic, 2); - spin_unlock_irqrestore(&ioapic_lock, flags); - - printk("\n"); - printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); - printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); - printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); - - printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)®_01); - printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries); - - printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); - printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version); - - if (reg_01.bits.version >= 0x10) { - printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); - printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); - } - - printk(KERN_DEBUG ".... IRQ redirection table:\n"); - - printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol" - " Stat Dmod Deli Vect: \n"); - - for (i = 0; i <= reg_01.bits.entries; i++) { - struct IO_APIC_route_entry entry; - - entry = ioapic_read_entry(apic, i); - - printk(KERN_DEBUG " %02x %03X ", - i, - entry.dest - ); - - printk("%1d %1d %1d %1d %1d %1d %1d %02X\n", - entry.mask, - entry.trigger, - entry.irr, - entry.polarity, - entry.delivery_status, - entry.dest_mode, - entry.delivery_mode, - entry.vector - ); - } - } - printk(KERN_DEBUG "IRQ to pin mappings:\n"); - for (i = 0; i < NR_IRQS; i++) { - struct irq_pin_list *entry = irq_2_pin + i; - if (entry->pin < 0) - continue; - printk(KERN_DEBUG "IRQ%d ", i); - for (;;) { - printk("-> %d:%d", entry->apic, entry->pin); - if (!entry->next) - break; - entry = irq_2_pin + entry->next; - } - printk("\n"); - } - - printk(KERN_INFO ".................................... done.\n"); - - return; -} - -#if 0 - -static __apicdebuginit void print_APIC_bitfield (int base) -{ - unsigned int v; - int i, j; - - if (apic_verbosity == APIC_QUIET) - return; - - printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG); - for (i = 0; i < 8; i++) { - v = apic_read(base + i*0x10); - for (j = 0; j < 32; j++) { - if (v & (1<<j)) - printk("1"); - else - printk("0"); - } - printk("\n"); - } -} - -void __apicdebuginit print_local_APIC(void * dummy) -{ - unsigned int v, ver, maxlvt; - - if (apic_verbosity == APIC_QUIET) - return; - - printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", - smp_processor_id(), hard_smp_processor_id()); - v = apic_read(APIC_ID); - printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(v)); - v = apic_read(APIC_LVR); - printk(KERN_INFO "... APIC VERSION: %08x\n", v); - ver = GET_APIC_VERSION(v); - maxlvt = get_maxlvt(); - - v = apic_read(APIC_TASKPRI); - printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK); - - v = apic_read(APIC_ARBPRI); - printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v, - v & APIC_ARBPRI_MASK); - v = apic_read(APIC_PROCPRI); - printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v); - - v = apic_read(APIC_EOI); - printk(KERN_DEBUG "... APIC EOI: %08x\n", v); - v = apic_read(APIC_RRR); - printk(KERN_DEBUG "... APIC RRR: %08x\n", v); - v = apic_read(APIC_LDR); - printk(KERN_DEBUG "... APIC LDR: %08x\n", v); - v = apic_read(APIC_DFR); - printk(KERN_DEBUG "... APIC DFR: %08x\n", v); - v = apic_read(APIC_SPIV); - printk(KERN_DEBUG "... APIC SPIV: %08x\n", v); - - printk(KERN_DEBUG "... APIC ISR field:\n"); - print_APIC_bitfield(APIC_ISR); - printk(KERN_DEBUG "... APIC TMR field:\n"); - print_APIC_bitfield(APIC_TMR); - printk(KERN_DEBUG "... APIC IRR field:\n"); - print_APIC_bitfield(APIC_IRR); - - v = apic_read(APIC_ESR); - printk(KERN_DEBUG "... APIC ESR: %08x\n", v); - - v = apic_read(APIC_ICR); - printk(KERN_DEBUG "... APIC ICR: %08x\n", v); - v = apic_read(APIC_ICR2); - printk(KERN_DEBUG "... APIC ICR2: %08x\n", v); - - v = apic_read(APIC_LVTT); - printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); - - if (maxlvt > 3) { /* PC is LVT#4. */ - v = apic_read(APIC_LVTPC); - printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v); - } - v = apic_read(APIC_LVT0); - printk(KERN_DEBUG "... APIC LVT0: %08x\n", v); - v = apic_read(APIC_LVT1); - printk(KERN_DEBUG "... APIC LVT1: %08x\n", v); - - if (maxlvt > 2) { /* ERR is LVT#3. */ - v = apic_read(APIC_LVTERR); - printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v); - } - - v = apic_read(APIC_TMICT); - printk(KERN_DEBUG "... APIC TMICT: %08x\n", v); - v = apic_read(APIC_TMCCT); - printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v); - v = apic_read(APIC_TDCR); - printk(KERN_DEBUG "... APIC TDCR: %08x\n", v); - printk("\n"); -} - -void print_all_local_APICs (void) -{ - on_each_cpu(print_local_APIC, NULL, 1, 1); -} - -void __apicdebuginit print_PIC(void) -{ - unsigned int v; - unsigned long flags; - - if (apic_verbosity == APIC_QUIET) - return; - - printk(KERN_DEBUG "\nprinting PIC contents\n"); - - spin_lock_irqsave(&i8259A_lock, flags); - - v = inb(0xa1) << 8 | inb(0x21); - printk(KERN_DEBUG "... PIC IMR: %04x\n", v); - - v = inb(0xa0) << 8 | inb(0x20); - printk(KERN_DEBUG "... PIC IRR: %04x\n", v); - - outb(0x0b,0xa0); - outb(0x0b,0x20); - v = inb(0xa0) << 8 | inb(0x20); - outb(0x0a,0xa0); - outb(0x0a,0x20); - - spin_unlock_irqrestore(&i8259A_lock, flags); - - printk(KERN_DEBUG "... PIC ISR: %04x\n", v); - - v = inb(0x4d1) << 8 | inb(0x4d0); - printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); -} - -#endif /* 0 */ - -static void __init enable_IO_APIC(void) -{ - union IO_APIC_reg_01 reg_01; - int i8259_apic, i8259_pin; - int i, apic; - unsigned long flags; - - for (i = 0; i < PIN_MAP_SIZE; i++) { - irq_2_pin[i].pin = -1; - irq_2_pin[i].next = 0; - } - - /* - * The number of IO-APIC IRQ registers (== #pins): - */ - for (apic = 0; apic < nr_ioapics; apic++) { - spin_lock_irqsave(&ioapic_lock, flags); - reg_01.raw = io_apic_read(apic, 1); - spin_unlock_irqrestore(&ioapic_lock, flags); - nr_ioapic_registers[apic] = reg_01.bits.entries+1; - } - for(apic = 0; apic < nr_ioapics; apic++) { - int pin; - /* See if any of the pins is in ExtINT mode */ - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - struct IO_APIC_route_entry entry; - entry = ioapic_read_entry(apic, pin); - - /* If the interrupt line is enabled and in ExtInt mode - * I have found the pin where the i8259 is connected. - */ - if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) { - ioapic_i8259.apic = apic; - ioapic_i8259.pin = pin; - goto found_i8259; - } - } - } - found_i8259: - /* Look to see what if the MP table has reported the ExtINT */ - i8259_pin = find_isa_irq_pin(0, mp_ExtINT); - i8259_apic = find_isa_irq_apic(0, mp_ExtINT); - /* Trust the MP table if nothing is setup in the hardware */ - if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { - printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); - ioapic_i8259.pin = i8259_pin; - ioapic_i8259.apic = i8259_apic; - } - /* Complain if the MP table and the hardware disagree */ - if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && - (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) - { - printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); - } - - /* - * Do not trust the IO-APIC being empty at bootup - */ - clear_IO_APIC(); -} - -/* - * Not an __init, needed by the reboot code - */ -void disable_IO_APIC(void) -{ - /* - * Clear the IO-APIC before rebooting: - */ - clear_IO_APIC(); - - /* - * If the i8259 is routed through an IOAPIC - * Put that IOAPIC in virtual wire mode - * so legacy interrupts can be delivered. - */ - if (ioapic_i8259.pin != -1) { - struct IO_APIC_route_entry entry; - - memset(&entry, 0, sizeof(entry)); - entry.mask = 0; /* Enabled */ - entry.trigger = 0; /* Edge */ - entry.irr = 0; - entry.polarity = 0; /* High */ - entry.delivery_status = 0; - entry.dest_mode = 0; /* Physical */ - entry.delivery_mode = dest_ExtINT; /* ExtInt */ - entry.vector = 0; - entry.dest = GET_APIC_ID(apic_read(APIC_ID)); - - /* - * Add it to the IO-APIC irq-routing table: - */ - ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); - } - - disconnect_bsp_APIC(ioapic_i8259.pin != -1); -} - -/* - * There is a nasty bug in some older SMP boards, their mptable lies - * about the timer IRQ. We do the following to work around the situation: - * - * - timer IRQ defaults to IO-APIC IRQ - * - if this function detects that timer IRQs are defunct, then we fall - * back to ISA timer IRQs - */ -static int __init timer_irq_works(void) -{ - unsigned long t1 = jiffies; - - local_irq_enable(); - /* Let ten ticks pass... */ - mdelay((10 * 1000) / HZ); - - /* - * Expect a few ticks at least, to be sure some possible - * glue logic does not lock up after one or two first - * ticks in a non-ExtINT mode. Also the local APIC - * might have cached one ExtINT interrupt. Finally, at - * least one tick may be lost due to delays. - */ - - /* jiffies wrap? */ - if (jiffies - t1 > 4) - return 1; - return 0; -} - -/* - * In the SMP+IOAPIC case it might happen that there are an unspecified - * number of pending IRQ events unhandled. These cases are very rare, - * so we 'resend' these IRQs via IPIs, to the same CPU. It's much - * better to do it this way as thus we do not have to be aware of - * 'pending' interrupts in the IRQ path, except at this point. - */ -/* - * Edge triggered needs to resend any interrupt - * that was delayed but this is now handled in the device - * independent code. - */ - -/* - * Starting up a edge-triggered IO-APIC interrupt is - * nasty - we need to make sure that we get the edge. - * If it is already asserted for some reason, we need - * return 1 to indicate that is was pending. - * - * This is not complete - we should be able to fake - * an edge even if it isn't on the 8259A... - */ - -static unsigned int startup_ioapic_irq(unsigned int irq) -{ - int was_pending = 0; - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - if (irq < 16) { - disable_8259A_irq(irq); - if (i8259A_irq_pending(irq)) - was_pending = 1; - } - __unmask_IO_APIC_irq(irq); - spin_unlock_irqrestore(&ioapic_lock, flags); - - return was_pending; -} - -static int ioapic_retrigger_irq(unsigned int irq) -{ - struct irq_cfg *cfg = &irq_cfg[irq]; - cpumask_t mask; - unsigned long flags; - - spin_lock_irqsave(&vector_lock, flags); - cpus_clear(mask); - cpu_set(first_cpu(cfg->domain), mask); - - send_IPI_mask(mask, cfg->vector); - spin_unlock_irqrestore(&vector_lock, flags); - - return 1; -} - -/* - * Level and edge triggered IO-APIC interrupts need different handling, - * so we use two separate IRQ descriptors. Edge triggered IRQs can be - * handled with the level-triggered descriptor, but that one has slightly - * more overhead. Level-triggered interrupts cannot be handled with the - * edge-triggered handler, without risking IRQ storms and other ugly - * races. - */ - -#ifdef CONFIG_SMP -asmlinkage void smp_irq_move_cleanup_interrupt(void) -{ - unsigned vector, me; - ack_APIC_irq(); - exit_idle(); - irq_enter(); - - me = smp_processor_id(); - for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) { - unsigned int irq; - struct irq_desc *desc; - struct irq_cfg *cfg; - irq = __get_cpu_var(vector_irq)[vector]; - if (irq >= NR_IRQS) - continue; - - desc = irq_desc + irq; - cfg = irq_cfg + irq; - spin_lock(&desc->lock); - if (!cfg->move_cleanup_count) - goto unlock; - - if ((vector == cfg->vector) && cpu_isset(me, cfg->domain)) - goto unlock; - - __get_cpu_var(vector_irq)[vector] = -1; - cfg->move_cleanup_count--; -unlock: - spin_unlock(&desc->lock); - } - - irq_exit(); -} - -static void irq_complete_move(unsigned int irq) -{ - struct irq_cfg *cfg = irq_cfg + irq; - unsigned vector, me; - - if (likely(!cfg->move_in_progress)) - return; - - vector = ~get_irq_regs()->orig_rax; - me = smp_processor_id(); - if ((vector == cfg->vector) && cpu_isset(me, cfg->domain)) { - cpumask_t cleanup_mask; - - cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map); - cfg->move_cleanup_count = cpus_weight(cleanup_mask); - send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); - cfg->move_in_progress = 0; - } -} -#else -static inline void irq_complete_move(unsigned int irq) {} -#endif - -static void ack_apic_edge(unsigned int irq) -{ - irq_complete_move(irq); - move_native_irq(irq); - ack_APIC_irq(); -} - -static void ack_apic_level(unsigned int irq) -{ - int do_unmask_irq = 0; - - irq_complete_move(irq); -#if defined(CONFIG_GENERIC_PENDING_IRQ) || defined(CONFIG_IRQBALANCE) - /* If we are moving the irq we need to mask it */ - if (unlikely(irq_desc[irq].status & IRQ_MOVE_PENDING)) { - do_unmask_irq = 1; - mask_IO_APIC_irq(irq); - } -#endif - - /* - * We must acknowledge the irq before we move it or the acknowledge will - * not propagate properly. - */ - ack_APIC_irq(); - - /* Now we can move and renable the irq */ - if (unlikely(do_unmask_irq)) { - /* Only migrate the irq if the ack has been received. - * - * On rare occasions the broadcast level triggered ack gets - * delayed going to ioapics, and if we reprogram the - * vector while Remote IRR is still set the irq will never - * fire again. - * - * To prevent this scenario we read the Remote IRR bit - * of the ioapic. This has two effects. - * - On any sane system the read of the ioapic will - * flush writes (and acks) going to the ioapic from - * this cpu. - * - We get to see if the ACK has actually been delivered. - * - * Based on failed experiments of reprogramming the - * ioapic entry from outside of irq context starting - * with masking the ioapic entry and then polling until - * Remote IRR was clear before reprogramming the - * ioapic I don't trust the Remote IRR bit to be - * completey accurate. - * - * However there appears to be no other way to plug - * this race, so if the Remote IRR bit is not - * accurate and is causing problems then it is a hardware bug - * and you can go talk to the chipset vendor about it. - */ - if (!io_apic_level_ack_pending(irq)) - move_masked_irq(irq); - unmask_IO_APIC_irq(irq); - } -} - -static struct irq_chip ioapic_chip __read_mostly = { - .name = "IO-APIC", - .startup = startup_ioapic_irq, - .mask = mask_IO_APIC_irq, - .unmask = unmask_IO_APIC_irq, - .ack = ack_apic_edge, - .eoi = ack_apic_level, -#ifdef CONFIG_SMP - .set_affinity = set_ioapic_affinity_irq, -#endif - .retrigger = ioapic_retrigger_irq, -}; - -static inline void init_IO_APIC_traps(void) -{ - int irq; - - /* - * NOTE! The local APIC isn't very good at handling - * multiple interrupts at the same interrupt level. - * As the interrupt level is determined by taking the - * vector number and shifting that right by 4, we - * want to spread these out a bit so that they don't - * all fall in the same interrupt level. - * - * Also, we've got to be careful not to trash gate - * 0x80, because int 0x80 is hm, kind of importantish. ;) - */ - for (irq = 0; irq < NR_IRQS ; irq++) { - int tmp = irq; - if (IO_APIC_IRQ(tmp) && !irq_cfg[tmp].vector) { - /* - * Hmm.. We don't have an entry for this, - * so default to an old-fashioned 8259 - * interrupt if we can.. - */ - if (irq < 16) - make_8259A_irq(irq); - else - /* Strange. Oh, well.. */ - irq_desc[irq].chip = &no_irq_chip; - } - } -} - -static void enable_lapic_irq (unsigned int irq) -{ - unsigned long v; - - v = apic_read(APIC_LVT0); - apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED); -} - -static void disable_lapic_irq (unsigned int irq) -{ - unsigned long v; - - v = apic_read(APIC_LVT0); - apic_write(APIC_LVT0, v | APIC_LVT_MASKED); -} - -static void ack_lapic_irq (unsigned int irq) -{ - ack_APIC_irq(); -} - -static void end_lapic_irq (unsigned int i) { /* nothing */ } - -static struct hw_interrupt_type lapic_irq_type __read_mostly = { - .name = "local-APIC", - .typename = "local-APIC-edge", - .startup = NULL, /* startup_irq() not used for IRQ0 */ - .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */ - .enable = enable_lapic_irq, - .disable = disable_lapic_irq, - .ack = ack_lapic_irq, - .end = end_lapic_irq, -}; - -static void setup_nmi (void) -{ - /* - * Dirty trick to enable the NMI watchdog ... - * We put the 8259A master into AEOI mode and - * unmask on all local APICs LVT0 as NMI. - * - * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') - * is from Maciej W. Rozycki - so we do not have to EOI from - * the NMI handler or the timer interrupt. - */ - printk(KERN_INFO "activating NMI Watchdog ..."); - - enable_NMI_through_LVT0(NULL); - - printk(" done.\n"); -} - -/* - * This looks a bit hackish but it's about the only one way of sending - * a few INTA cycles to 8259As and any associated glue logic. ICR does - * not support the ExtINT mode, unfortunately. We need to send these - * cycles as some i82489DX-based boards have glue logic that keeps the - * 8259A interrupt line asserted until INTA. --macro - */ -static inline void unlock_ExtINT_logic(void) -{ - int apic, pin, i; - struct IO_APIC_route_entry entry0, entry1; - unsigned char save_control, save_freq_select; - unsigned long flags; - - pin = find_isa_irq_pin(8, mp_INT); - apic = find_isa_irq_apic(8, mp_INT); - if (pin == -1) - return; - - spin_lock_irqsave(&ioapic_lock, flags); - *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin); - *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin); - spin_unlock_irqrestore(&ioapic_lock, flags); - clear_IO_APIC_pin(apic, pin); - - memset(&entry1, 0, sizeof(entry1)); - - entry1.dest_mode = 0; /* physical delivery */ - entry1.mask = 0; /* unmask IRQ now */ - entry1.dest = hard_smp_processor_id(); - entry1.delivery_mode = dest_ExtINT; - entry1.polarity = entry0.polarity; - entry1.trigger = 0; - entry1.vector = 0; - - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1)); - io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0)); - spin_unlock_irqrestore(&ioapic_lock, flags); - - save_control = CMOS_READ(RTC_CONTROL); - save_freq_select = CMOS_READ(RTC_FREQ_SELECT); - CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, - RTC_FREQ_SELECT); - CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); - - i = 100; - while (i-- > 0) { - mdelay(10); - if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) - i -= 10; - } - - CMOS_WRITE(save_control, RTC_CONTROL); - CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); - clear_IO_APIC_pin(apic, pin); - - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1)); - io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0)); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -/* - * This code may look a bit paranoid, but it's supposed to cooperate with - * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ - * is so screwy. Thanks to Brian Perkins for testing/hacking this beast - * fanatically on his truly buggy board. - * - * FIXME: really need to revamp this for modern platforms only. - */ -static inline void check_timer(void) -{ - struct irq_cfg *cfg = irq_cfg + 0; - int apic1, pin1, apic2, pin2; - - /* - * get/set the timer IRQ vector: - */ - disable_8259A_irq(0); - assign_irq_vector(0, TARGET_CPUS); - - /* - * Subtle, code in do_timer_interrupt() expects an AEOI - * mode for the 8259A whenever interrupts are routed - * through I/O APICs. Also IRQ0 has to be enabled in - * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. - */ - apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); - init_8259A(1); - if (timer_over_8254 > 0) - enable_8259A_irq(0); - - pin1 = find_isa_irq_pin(0, mp_INT); - apic1 = find_isa_irq_apic(0, mp_INT); - pin2 = ioapic_i8259.pin; - apic2 = ioapic_i8259.apic; - - apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", - cfg->vector, apic1, pin1, apic2, pin2); - - if (pin1 != -1) { - /* - * Ok, does IRQ0 through the IOAPIC work? - */ - unmask_IO_APIC_irq(0); - if (!no_timer_check && timer_irq_works()) { - nmi_watchdog_default(); - if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); - setup_nmi(); - enable_8259A_irq(0); - } - if (disable_timer_pin_1 > 0) - clear_IO_APIC_pin(0, pin1); - return; - } - clear_IO_APIC_pin(apic1, pin1); - apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not " - "connected to IO-APIC\n"); - } - - apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) " - "through the 8259A ... "); - if (pin2 != -1) { - apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...", - apic2, pin2); - /* - * legacy devices should be connected to IO APIC #0 - */ - setup_ExtINT_IRQ0_pin(apic2, pin2, cfg->vector); - if (timer_irq_works()) { - apic_printk(APIC_VERBOSE," works.\n"); - nmi_watchdog_default(); - if (nmi_watchdog == NMI_IO_APIC) { - setup_nmi(); - } - return; - } - /* - * Cleanup, just in case ... - */ - clear_IO_APIC_pin(apic2, pin2); - } - apic_printk(APIC_VERBOSE," failed.\n"); - - if (nmi_watchdog == NMI_IO_APIC) { - printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); - nmi_watchdog = 0; - } - - apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); - - disable_8259A_irq(0); - irq_desc[0].chip = &lapic_irq_type; - apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ - enable_8259A_irq(0); - - if (timer_irq_works()) { - apic_printk(APIC_VERBOSE," works.\n"); - return; - } - apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); - apic_printk(APIC_VERBOSE," failed.\n"); - - apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ..."); - - init_8259A(0); - make_8259A_irq(0); - apic_write(APIC_LVT0, APIC_DM_EXTINT); - - unlock_ExtINT_logic(); - - if (timer_irq_works()) { - apic_printk(APIC_VERBOSE," works.\n"); - return; - } - apic_printk(APIC_VERBOSE," failed :(.\n"); - panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n"); -} - -static int __init notimercheck(char *s) -{ - no_timer_check = 1; - return 1; -} -__setup("no_timer_check", notimercheck); - -/* - * - * IRQ's that are handled by the PIC in the MPS IOAPIC case. - * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ. - * Linux doesn't really care, as it's not actually used - * for any interrupt handling anyway. - */ -#define PIC_IRQS (1<<2) - -void __init setup_IO_APIC(void) -{ - enable_IO_APIC(); - - if (acpi_ioapic) - io_apic_irqs = ~0; /* all IRQs go through IOAPIC */ - else - io_apic_irqs = ~PIC_IRQS; - - apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); - - sync_Arb_IDs(); - setup_IO_APIC_irqs(); - init_IO_APIC_traps(); - check_timer(); - if (!acpi_ioapic) - print_IO_APIC(); -} - -struct sysfs_ioapic_data { - struct sys_device dev; - struct IO_APIC_route_entry entry[0]; -}; -static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS]; - -static int ioapic_suspend(struct sys_device *dev, pm_message_t state) -{ - struct IO_APIC_route_entry *entry; - struct sysfs_ioapic_data *data; - int i; - - data = container_of(dev, struct sysfs_ioapic_data, dev); - entry = data->entry; - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) - *entry = ioapic_read_entry(dev->id, i); - - return 0; -} - -static int ioapic_resume(struct sys_device *dev) -{ - struct IO_APIC_route_entry *entry; - struct sysfs_ioapic_data *data; - unsigned long flags; - union IO_APIC_reg_00 reg_00; - int i; - - data = container_of(dev, struct sysfs_ioapic_data, dev); - entry = data->entry; - - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(dev->id, 0); - if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { - reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; - io_apic_write(dev->id, 0, reg_00.raw); - } - spin_unlock_irqrestore(&ioapic_lock, flags); - for (i = 0; i < nr_ioapic_registers[dev->id]; i++) - ioapic_write_entry(dev->id, i, entry[i]); - - return 0; -} - -static struct sysdev_class ioapic_sysdev_class = { - set_kset_name("ioapic"), - .suspend = ioapic_suspend, - .resume = ioapic_resume, -}; - -static int __init ioapic_init_sysfs(void) -{ - struct sys_device * dev; - int i, size, error = 0; - - error = sysdev_class_register(&ioapic_sysdev_class); - if (error) - return error; - - for (i = 0; i < nr_ioapics; i++ ) { - size = sizeof(struct sys_device) + nr_ioapic_registers[i] - * sizeof(struct IO_APIC_route_entry); - mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL); - if (!mp_ioapic_data[i]) { - printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); - continue; - } - memset(mp_ioapic_data[i], 0, size); - dev = &mp_ioapic_data[i]->dev; - dev->id = i; - dev->cls = &ioapic_sysdev_class; - error = sysdev_register(dev); - if (error) { - kfree(mp_ioapic_data[i]); - mp_ioapic_data[i] = NULL; - printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); - continue; - } - } - - return 0; -} - -device_initcall(ioapic_init_sysfs); - -/* - * Dynamic irq allocate and deallocation - */ -int create_irq(void) -{ - /* Allocate an unused irq */ - int irq; - int new; - unsigned long flags; - - irq = -ENOSPC; - spin_lock_irqsave(&vector_lock, flags); - for (new = (NR_IRQS - 1); new >= 0; new--) { - if (platform_legacy_irq(new)) - continue; - if (irq_cfg[new].vector != 0) - continue; - if (__assign_irq_vector(new, TARGET_CPUS) == 0) - irq = new; - break; - } - spin_unlock_irqrestore(&vector_lock, flags); - - if (irq >= 0) { - dynamic_irq_init(irq); - } - return irq; -} - -void destroy_irq(unsigned int irq) -{ - unsigned long flags; - - dynamic_irq_cleanup(irq); - - spin_lock_irqsave(&vector_lock, flags); - __clear_irq_vector(irq); - spin_unlock_irqrestore(&vector_lock, flags); -} - -/* - * MSI mesage composition - */ -#ifdef CONFIG_PCI_MSI -static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg) -{ - struct irq_cfg *cfg = irq_cfg + irq; - int err; - unsigned dest; - cpumask_t tmp; - - tmp = TARGET_CPUS; - err = assign_irq_vector(irq, tmp); - if (!err) { - cpus_and(tmp, cfg->domain, tmp); - dest = cpu_mask_to_apicid(tmp); - - msg->address_hi = MSI_ADDR_BASE_HI; - msg->address_lo = - MSI_ADDR_BASE_LO | - ((INT_DEST_MODE == 0) ? - MSI_ADDR_DEST_MODE_PHYSICAL: - MSI_ADDR_DEST_MODE_LOGICAL) | - ((INT_DELIVERY_MODE != dest_LowestPrio) ? - MSI_ADDR_REDIRECTION_CPU: - MSI_ADDR_REDIRECTION_LOWPRI) | - MSI_ADDR_DEST_ID(dest); - - msg->data = - MSI_DATA_TRIGGER_EDGE | - MSI_DATA_LEVEL_ASSERT | - ((INT_DELIVERY_MODE != dest_LowestPrio) ? - MSI_DATA_DELIVERY_FIXED: - MSI_DATA_DELIVERY_LOWPRI) | - MSI_DATA_VECTOR(cfg->vector); - } - return err; -} - -#ifdef CONFIG_SMP -static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask) -{ - struct irq_cfg *cfg = irq_cfg + irq; - struct msi_msg msg; - unsigned int dest; - cpumask_t tmp; - - cpus_and(tmp, mask, cpu_online_map); - if (cpus_empty(tmp)) - return; - - if (assign_irq_vector(irq, mask)) - return; - - cpus_and(tmp, cfg->domain, mask); - dest = cpu_mask_to_apicid(tmp); - - read_msi_msg(irq, &msg); - - msg.data &= ~MSI_DATA_VECTOR_MASK; - msg.data |= MSI_DATA_VECTOR(cfg->vector); - msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; - msg.address_lo |= MSI_ADDR_DEST_ID(dest); - - write_msi_msg(irq, &msg); - irq_desc[irq].affinity = mask; -} -#endif /* CONFIG_SMP */ - -/* - * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices, - * which implement the MSI or MSI-X Capability Structure. - */ -static struct irq_chip msi_chip = { - .name = "PCI-MSI", - .unmask = unmask_msi_irq, - .mask = mask_msi_irq, - .ack = ack_apic_edge, -#ifdef CONFIG_SMP - .set_affinity = set_msi_irq_affinity, -#endif - .retrigger = ioapic_retrigger_irq, -}; - -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) -{ - struct msi_msg msg; - int irq, ret; - irq = create_irq(); - if (irq < 0) - return irq; - - ret = msi_compose_msg(dev, irq, &msg); - if (ret < 0) { - destroy_irq(irq); - return ret; - } - - set_irq_msi(irq, desc); - write_msi_msg(irq, &msg); - - set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge"); - - return 0; -} - -void arch_teardown_msi_irq(unsigned int irq) -{ - destroy_irq(irq); -} - -#endif /* CONFIG_PCI_MSI */ - -/* - * Hypertransport interrupt support - */ -#ifdef CONFIG_HT_IRQ - -#ifdef CONFIG_SMP - -static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector) -{ - struct ht_irq_msg msg; - fetch_ht_irq_msg(irq, &msg); - - msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK); - msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK); - - msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest); - msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest); - - write_ht_irq_msg(irq, &msg); -} - -static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask) -{ - struct irq_cfg *cfg = irq_cfg + irq; - unsigned int dest; - cpumask_t tmp; - - cpus_and(tmp, mask, cpu_online_map); - if (cpus_empty(tmp)) - return; - - if (assign_irq_vector(irq, mask)) - return; - - cpus_and(tmp, cfg->domain, mask); - dest = cpu_mask_to_apicid(tmp); - - target_ht_irq(irq, dest, cfg->vector); - irq_desc[irq].affinity = mask; -} -#endif - -static struct irq_chip ht_irq_chip = { - .name = "PCI-HT", - .mask = mask_ht_irq, - .unmask = unmask_ht_irq, - .ack = ack_apic_edge, -#ifdef CONFIG_SMP - .set_affinity = set_ht_irq_affinity, -#endif - .retrigger = ioapic_retrigger_irq, -}; - -int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) -{ - struct irq_cfg *cfg = irq_cfg + irq; - int err; - cpumask_t tmp; - - tmp = TARGET_CPUS; - err = assign_irq_vector(irq, tmp); - if (!err) { - struct ht_irq_msg msg; - unsigned dest; - - cpus_and(tmp, cfg->domain, tmp); - dest = cpu_mask_to_apicid(tmp); - - msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest); - - msg.address_lo = - HT_IRQ_LOW_BASE | - HT_IRQ_LOW_DEST_ID(dest) | - HT_IRQ_LOW_VECTOR(cfg->vector) | - ((INT_DEST_MODE == 0) ? - HT_IRQ_LOW_DM_PHYSICAL : - HT_IRQ_LOW_DM_LOGICAL) | - HT_IRQ_LOW_RQEOI_EDGE | - ((INT_DELIVERY_MODE != dest_LowestPrio) ? - HT_IRQ_LOW_MT_FIXED : - HT_IRQ_LOW_MT_ARBITRATED) | - HT_IRQ_LOW_IRQ_MASKED; - - write_ht_irq_msg(irq, &msg); - - set_irq_chip_and_handler_name(irq, &ht_irq_chip, - handle_edge_irq, "edge"); - } - return err; -} -#endif /* CONFIG_HT_IRQ */ - -/* -------------------------------------------------------------------------- - ACPI-based IOAPIC Configuration - -------------------------------------------------------------------------- */ - -#ifdef CONFIG_ACPI - -#define IO_APIC_MAX_ID 0xFE - -int __init io_apic_get_redir_entries (int ioapic) -{ - union IO_APIC_reg_01 reg_01; - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - reg_01.raw = io_apic_read(ioapic, 1); - spin_unlock_irqrestore(&ioapic_lock, flags); - - return reg_01.bits.entries; -} - - -int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity) -{ - if (!IO_APIC_IRQ(irq)) { - apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", - ioapic); - return -EINVAL; - } - - /* - * IRQs < 16 are already in the irq_2_pin[] map - */ - if (irq >= 16) - add_pin_to_irq(irq, ioapic, pin); - - setup_IO_APIC_irq(ioapic, pin, irq, triggering, polarity); - - return 0; -} - -#endif /* CONFIG_ACPI */ - - -/* - * This function currently is only a helper for the i386 smp boot process where - * we need to reprogram the ioredtbls to cater for the cpus which have come online - * so mask in all cases should simply be TARGET_CPUS - */ -#ifdef CONFIG_SMP -void __init setup_ioapic_dest(void) -{ - int pin, ioapic, irq, irq_entry; - - if (skip_ioapic_setup == 1) - return; - - for (ioapic = 0; ioapic < nr_ioapics; ioapic++) { - for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { - irq_entry = find_irq_entry(ioapic, pin, mp_INT); - if (irq_entry == -1) - continue; - irq = pin_2_irq(irq_entry, ioapic, pin); - - /* setup_IO_APIC_irqs could fail to get vector for some device - * when you have too many devices, because at that time only boot - * cpu is online. - */ - if (!irq_cfg[irq].vector) - setup_IO_APIC_irq(ioapic, pin, irq, - irq_trigger(irq_entry), - irq_polarity(irq_entry)); - else - set_ioapic_affinity_irq(irq, TARGET_CPUS); - } - - } -} -#endif diff --git a/arch/x86_64/kernel/ioport_64.c b/arch/x86_64/kernel/ioport_64.c deleted file mode 100644 index 653efa30b0f..00000000000 --- a/arch/x86_64/kernel/ioport_64.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * linux/arch/x86_64/kernel/ioport.c - * - * This contains the io-permission bitmap code - written by obz, with changes - * by Linus. - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/capability.h> -#include <linux/errno.h> -#include <linux/types.h> -#include <linux/ioport.h> -#include <linux/smp.h> -#include <linux/stddef.h> -#include <linux/slab.h> -#include <linux/thread_info.h> -#include <linux/syscalls.h> - -/* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */ -static void set_bitmap(unsigned long *bitmap, unsigned int base, unsigned int extent, int new_value) -{ - int i; - if (new_value) - for (i = base; i < base + extent; i++) - __set_bit(i, bitmap); - else - for (i = base; i < base + extent; i++) - clear_bit(i, bitmap); -} - -/* - * this changes the io permissions bitmap in the current task. - */ -asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on) -{ - unsigned int i, max_long, bytes, bytes_updated; - struct thread_struct * t = ¤t->thread; - struct tss_struct * tss; - unsigned long *bitmap; - - if ((from + num <= from) || (from + num > IO_BITMAP_BITS)) - return -EINVAL; - if (turn_on && !capable(CAP_SYS_RAWIO)) - return -EPERM; - - /* - * If it's the first ioperm() call in this thread's lifetime, set the - * IO bitmap up. ioperm() is much less timing critical than clone(), - * this is why we delay this operation until now: - */ - if (!t->io_bitmap_ptr) { - bitmap = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL); - if (!bitmap) - return -ENOMEM; - - memset(bitmap, 0xff, IO_BITMAP_BYTES); - t->io_bitmap_ptr = bitmap; - set_thread_flag(TIF_IO_BITMAP); - } - - /* - * do it in the per-thread copy and in the TSS ... - * - * Disable preemption via get_cpu() - we must not switch away - * because the ->io_bitmap_max value must match the bitmap - * contents: - */ - tss = &per_cpu(init_tss, get_cpu()); - - set_bitmap(t->io_bitmap_ptr, from, num, !turn_on); - - /* - * Search for a (possibly new) maximum. This is simple and stupid, - * to keep it obviously correct: - */ - max_long = 0; - for (i = 0; i < IO_BITMAP_LONGS; i++) - if (t->io_bitmap_ptr[i] != ~0UL) - max_long = i; - - bytes = (max_long + 1) * sizeof(long); - bytes_updated = max(bytes, t->io_bitmap_max); - - t->io_bitmap_max = bytes; - - /* Update the TSS: */ - memcpy(tss->io_bitmap, t->io_bitmap_ptr, bytes_updated); - - put_cpu(); - - return 0; -} - -/* - * sys_iopl has to be used when you want to access the IO ports - * beyond the 0x3ff range: to get the full 65536 ports bitmapped - * you'd need 8kB of bitmaps/process, which is a bit excessive. - * - * Here we just change the eflags value on the stack: we allow - * only the super-user to do it. This depends on the stack-layout - * on system-call entry - see also fork() and the signal handling - * code. - */ - -asmlinkage long sys_iopl(unsigned int level, struct pt_regs *regs) -{ - unsigned int old = (regs->eflags >> 12) & 3; - - if (level > 3) - return -EINVAL; - /* Trying to gain more privileges? */ - if (level > old) { - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - } - regs->eflags = (regs->eflags &~ X86_EFLAGS_IOPL) | (level << 12); - return 0; -} diff --git a/arch/x86_64/kernel/irq_64.c b/arch/x86_64/kernel/irq_64.c deleted file mode 100644 index 39cb3fa83eb..00000000000 --- a/arch/x86_64/kernel/irq_64.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * linux/arch/x86_64/kernel/irq.c - * - * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar - * - * This file contains the lowest level x86_64-specific interrupt - * entry and irq statistics code. All the remaining irq logic is - * done by the generic kernel/irq/ code and in the - * x86_64-specific irq controller code. (e.g. i8259.c and - * io_apic.c.) - */ - -#include <linux/kernel_stat.h> -#include <linux/interrupt.h> -#include <linux/seq_file.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <asm/uaccess.h> -#include <asm/io_apic.h> -#include <asm/idle.h> -#include <asm/smp.h> - -atomic_t irq_err_count; - -#ifdef CONFIG_DEBUG_STACKOVERFLOW -/* - * Probabilistic stack overflow check: - * - * Only check the stack in process context, because everything else - * runs on the big interrupt stacks. Checking reliably is too expensive, - * so we just check from interrupts. - */ -static inline void stack_overflow_check(struct pt_regs *regs) -{ - u64 curbase = (u64)task_stack_page(current); - static unsigned long warned = -60*HZ; - - if (regs->rsp >= curbase && regs->rsp <= curbase + THREAD_SIZE && - regs->rsp < curbase + sizeof(struct thread_info) + 128 && - time_after(jiffies, warned + 60*HZ)) { - printk("do_IRQ: %s near stack overflow (cur:%Lx,rsp:%lx)\n", - current->comm, curbase, regs->rsp); - show_stack(NULL,NULL); - warned = jiffies; - } -} -#endif - -/* - * Generic, controller-independent functions: - */ - -int show_interrupts(struct seq_file *p, void *v) -{ - int i = *(loff_t *) v, j; - struct irqaction * action; - unsigned long flags; - - if (i == 0) { - seq_printf(p, " "); - for_each_online_cpu(j) - seq_printf(p, "CPU%-8d",j); - seq_putc(p, '\n'); - } - - if (i < NR_IRQS) { - spin_lock_irqsave(&irq_desc[i].lock, flags); - action = irq_desc[i].action; - if (!action) - goto skip; - seq_printf(p, "%3d: ",i); -#ifndef CONFIG_SMP - seq_printf(p, "%10u ", kstat_irqs(i)); -#else - for_each_online_cpu(j) - seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); -#endif - seq_printf(p, " %8s", irq_desc[i].chip->name); - seq_printf(p, "-%-8s", irq_desc[i].name); - - seq_printf(p, " %s", action->name); - for (action=action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); - seq_putc(p, '\n'); -skip: - spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) { - seq_printf(p, "NMI: "); - for_each_online_cpu(j) - seq_printf(p, "%10u ", cpu_pda(j)->__nmi_count); - seq_putc(p, '\n'); - seq_printf(p, "LOC: "); - for_each_online_cpu(j) - seq_printf(p, "%10u ", cpu_pda(j)->apic_timer_irqs); - seq_putc(p, '\n'); - seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); - } - return 0; -} - -/* - * do_IRQ handles all normal device IRQ's (the special - * SMP cross-CPU interrupts have their own specific - * handlers). - */ -asmlinkage unsigned int do_IRQ(struct pt_regs *regs) -{ - struct pt_regs *old_regs = set_irq_regs(regs); - - /* high bit used in ret_from_ code */ - unsigned vector = ~regs->orig_rax; - unsigned irq; - - exit_idle(); - irq_enter(); - irq = __get_cpu_var(vector_irq)[vector]; - -#ifdef CONFIG_DEBUG_STACKOVERFLOW - stack_overflow_check(regs); -#endif - - if (likely(irq < NR_IRQS)) - generic_handle_irq(irq); - else { - if (!disable_apic) - ack_APIC_irq(); - - if (printk_ratelimit()) - printk(KERN_EMERG "%s: %d.%d No irq handler for vector\n", - __func__, smp_processor_id(), vector); - } - - irq_exit(); - - set_irq_regs(old_regs); - return 1; -} - -#ifdef CONFIG_HOTPLUG_CPU -void fixup_irqs(cpumask_t map) -{ - unsigned int irq; - static int warned; - - for (irq = 0; irq < NR_IRQS; irq++) { - cpumask_t mask; - int break_affinity = 0; - int set_affinity = 1; - - if (irq == 2) - continue; - - /* interrupt's are disabled at this point */ - spin_lock(&irq_desc[irq].lock); - - if (!irq_has_action(irq) || - cpus_equal(irq_desc[irq].affinity, map)) { - spin_unlock(&irq_desc[irq].lock); - continue; - } - - cpus_and(mask, irq_desc[irq].affinity, map); - if (cpus_empty(mask)) { - break_affinity = 1; - mask = map; - } - - if (irq_desc[irq].chip->mask) - irq_desc[irq].chip->mask(irq); - - if (irq_desc[irq].chip->set_affinity) - irq_desc[irq].chip->set_affinity(irq, mask); - else if (!(warned++)) - set_affinity = 0; - - if (irq_desc[irq].chip->unmask) - irq_desc[irq].chip->unmask(irq); - - spin_unlock(&irq_desc[irq].lock); - - if (break_affinity && set_affinity) - printk("Broke affinity for irq %i\n", irq); - else if (!set_affinity) - printk("Cannot set affinity for irq %i\n", irq); - } - - /* That doesn't seem sufficient. Give it 1ms. */ - local_irq_enable(); - mdelay(1); - local_irq_disable(); -} -#endif - -extern void call_softirq(void); - -asmlinkage void do_softirq(void) -{ - __u32 pending; - unsigned long flags; - - if (in_interrupt()) - return; - - local_irq_save(flags); - pending = local_softirq_pending(); - /* Switch to interrupt stack */ - if (pending) { - call_softirq(); - WARN_ON_ONCE(softirq_count()); - } - local_irq_restore(flags); -} -EXPORT_SYMBOL(do_softirq); diff --git a/arch/x86_64/kernel/k8.c b/arch/x86_64/kernel/k8.c deleted file mode 100644 index 7377ccb2133..00000000000 --- a/arch/x86_64/kernel/k8.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * Shared support code for AMD K8 northbridges and derivates. - * Copyright 2006 Andi Kleen, SUSE Labs. Subject to GPLv2. - */ -#include <linux/gfp.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <asm/k8.h> - -int num_k8_northbridges; -EXPORT_SYMBOL(num_k8_northbridges); - -static u32 *flush_words; - -struct pci_device_id k8_nb_ids[] = { - { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) }, - { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1203) }, - {} -}; -EXPORT_SYMBOL(k8_nb_ids); - -struct pci_dev **k8_northbridges; -EXPORT_SYMBOL(k8_northbridges); - -static struct pci_dev *next_k8_northbridge(struct pci_dev *dev) -{ - do { - dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); - if (!dev) - break; - } while (!pci_match_id(&k8_nb_ids[0], dev)); - return dev; -} - -int cache_k8_northbridges(void) -{ - int i; - struct pci_dev *dev; - - if (num_k8_northbridges) - return 0; - - dev = NULL; - while ((dev = next_k8_northbridge(dev)) != NULL) - num_k8_northbridges++; - - k8_northbridges = kmalloc((num_k8_northbridges + 1) * sizeof(void *), - GFP_KERNEL); - if (!k8_northbridges) - return -ENOMEM; - - if (!num_k8_northbridges) { - k8_northbridges[0] = NULL; - return 0; - } - - flush_words = kmalloc(num_k8_northbridges * sizeof(u32), GFP_KERNEL); - if (!flush_words) { - kfree(k8_northbridges); - return -ENOMEM; - } - - dev = NULL; - i = 0; - while ((dev = next_k8_northbridge(dev)) != NULL) { - k8_northbridges[i] = dev; - pci_read_config_dword(dev, 0x9c, &flush_words[i++]); - } - k8_northbridges[i] = NULL; - return 0; -} -EXPORT_SYMBOL_GPL(cache_k8_northbridges); - -/* Ignores subdevice/subvendor but as far as I can figure out - they're useless anyways */ -int __init early_is_k8_nb(u32 device) -{ - struct pci_device_id *id; - u32 vendor = device & 0xffff; - device >>= 16; - for (id = k8_nb_ids; id->vendor; id++) - if (vendor == id->vendor && device == id->device) - return 1; - return 0; -} - -void k8_flush_garts(void) -{ - int flushed, i; - unsigned long flags; - static DEFINE_SPINLOCK(gart_lock); - - /* Avoid races between AGP and IOMMU. In theory it's not needed - but I'm not sure if the hardware won't lose flush requests - when another is pending. This whole thing is so expensive anyways - that it doesn't matter to serialize more. -AK */ - spin_lock_irqsave(&gart_lock, flags); - flushed = 0; - for (i = 0; i < num_k8_northbridges; i++) { - pci_write_config_dword(k8_northbridges[i], 0x9c, - flush_words[i]|1); - flushed++; - } - for (i = 0; i < num_k8_northbridges; i++) { - u32 w; - /* Make sure the hardware actually executed the flush*/ - for (;;) { - pci_read_config_dword(k8_northbridges[i], - 0x9c, &w); - if (!(w & 1)) - break; - cpu_relax(); - } - } - spin_unlock_irqrestore(&gart_lock, flags); - if (!flushed) - printk("nothing to flush?\n"); -} -EXPORT_SYMBOL_GPL(k8_flush_garts); - diff --git a/arch/x86_64/kernel/kprobes_64.c b/arch/x86_64/kernel/kprobes_64.c deleted file mode 100644 index a30e004682e..00000000000 --- a/arch/x86_64/kernel/kprobes_64.c +++ /dev/null @@ -1,749 +0,0 @@ -/* - * Kernel Probes (KProbes) - * arch/x86_64/kernel/kprobes.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) IBM Corporation, 2002, 2004 - * - * 2002-Oct Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel - * Probes initial implementation ( includes contributions from - * Rusty Russell). - * 2004-July Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes - * interface to access function arguments. - * 2004-Oct Jim Keniston <kenistoj@us.ibm.com> and Prasanna S Panchamukhi - * <prasanna@in.ibm.com> adapted for x86_64 - * 2005-Mar Roland McGrath <roland@redhat.com> - * Fixed to handle %rip-relative addressing mode correctly. - * 2005-May Rusty Lynch <rusty.lynch@intel.com> - * Added function return probes functionality - */ - -#include <linux/kprobes.h> -#include <linux/ptrace.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/preempt.h> -#include <linux/module.h> -#include <linux/kdebug.h> - -#include <asm/pgtable.h> -#include <asm/uaccess.h> -#include <asm/alternative.h> - -void jprobe_return_end(void); -static void __kprobes arch_copy_kprobe(struct kprobe *p); - -DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; -DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); - -/* - * returns non-zero if opcode modifies the interrupt flag. - */ -static __always_inline int is_IF_modifier(kprobe_opcode_t *insn) -{ - switch (*insn) { - case 0xfa: /* cli */ - case 0xfb: /* sti */ - case 0xcf: /* iret/iretd */ - case 0x9d: /* popf/popfd */ - return 1; - } - - if (*insn >= 0x40 && *insn <= 0x4f && *++insn == 0xcf) - return 1; - return 0; -} - -int __kprobes arch_prepare_kprobe(struct kprobe *p) -{ - /* insn: must be on special executable page on x86_64. */ - p->ainsn.insn = get_insn_slot(); - if (!p->ainsn.insn) { - return -ENOMEM; - } - arch_copy_kprobe(p); - return 0; -} - -/* - * Determine if the instruction uses the %rip-relative addressing mode. - * If it does, return the address of the 32-bit displacement word. - * If not, return null. - */ -static s32 __kprobes *is_riprel(u8 *insn) -{ -#define W(row,b0,b1,b2,b3,b4,b5,b6,b7,b8,b9,ba,bb,bc,bd,be,bf) \ - (((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) | \ - (b4##UL << 0x4)|(b5##UL << 0x5)|(b6##UL << 0x6)|(b7##UL << 0x7) | \ - (b8##UL << 0x8)|(b9##UL << 0x9)|(ba##UL << 0xa)|(bb##UL << 0xb) | \ - (bc##UL << 0xc)|(bd##UL << 0xd)|(be##UL << 0xe)|(bf##UL << 0xf)) \ - << (row % 64)) - static const u64 onebyte_has_modrm[256 / 64] = { - /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ - /* ------------------------------- */ - W(0x00, 1,1,1,1,0,0,0,0,1,1,1,1,0,0,0,0)| /* 00 */ - W(0x10, 1,1,1,1,0,0,0,0,1,1,1,1,0,0,0,0)| /* 10 */ - W(0x20, 1,1,1,1,0,0,0,0,1,1,1,1,0,0,0,0)| /* 20 */ - W(0x30, 1,1,1,1,0,0,0,0,1,1,1,1,0,0,0,0), /* 30 */ - W(0x40, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 40 */ - W(0x50, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 50 */ - W(0x60, 0,0,1,1,0,0,0,0,0,1,0,1,0,0,0,0)| /* 60 */ - W(0x70, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 70 */ - W(0x80, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 80 */ - W(0x90, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 90 */ - W(0xa0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* a0 */ - W(0xb0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* b0 */ - W(0xc0, 1,1,0,0,1,1,1,1,0,0,0,0,0,0,0,0)| /* c0 */ - W(0xd0, 1,1,1,1,0,0,0,0,1,1,1,1,1,1,1,1)| /* d0 */ - W(0xe0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* e0 */ - W(0xf0, 0,0,0,0,0,0,1,1,0,0,0,0,0,0,1,1) /* f0 */ - /* ------------------------------- */ - /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ - }; - static const u64 twobyte_has_modrm[256 / 64] = { - /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ - /* ------------------------------- */ - W(0x00, 1,1,1,1,0,0,0,0,0,0,0,0,0,1,0,1)| /* 0f */ - W(0x10, 1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0)| /* 1f */ - W(0x20, 1,1,1,1,1,0,1,0,1,1,1,1,1,1,1,1)| /* 2f */ - W(0x30, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 3f */ - W(0x40, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 4f */ - W(0x50, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 5f */ - W(0x60, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 6f */ - W(0x70, 1,1,1,1,1,1,1,0,0,0,0,0,1,1,1,1), /* 7f */ - W(0x80, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 8f */ - W(0x90, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 9f */ - W(0xa0, 0,0,0,1,1,1,1,1,0,0,0,1,1,1,1,1)| /* af */ - W(0xb0, 1,1,1,1,1,1,1,1,0,0,1,1,1,1,1,1), /* bf */ - W(0xc0, 1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0)| /* cf */ - W(0xd0, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* df */ - W(0xe0, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* ef */ - W(0xf0, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0) /* ff */ - /* ------------------------------- */ - /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */ - }; -#undef W - int need_modrm; - - /* Skip legacy instruction prefixes. */ - while (1) { - switch (*insn) { - case 0x66: - case 0x67: - case 0x2e: - case 0x3e: - case 0x26: - case 0x64: - case 0x65: - case 0x36: - case 0xf0: - case 0xf3: - case 0xf2: - ++insn; - continue; - } - break; - } - - /* Skip REX instruction prefix. */ - if ((*insn & 0xf0) == 0x40) - ++insn; - - if (*insn == 0x0f) { /* Two-byte opcode. */ - ++insn; - need_modrm = test_bit(*insn, twobyte_has_modrm); - } else { /* One-byte opcode. */ - need_modrm = test_bit(*insn, onebyte_has_modrm); - } - - if (need_modrm) { - u8 modrm = *++insn; - if ((modrm & 0xc7) == 0x05) { /* %rip+disp32 addressing mode */ - /* Displacement follows ModRM byte. */ - return (s32 *) ++insn; - } - } - - /* No %rip-relative addressing mode here. */ - return NULL; -} - -static void __kprobes arch_copy_kprobe(struct kprobe *p) -{ - s32 *ripdisp; - memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE); - ripdisp = is_riprel(p->ainsn.insn); - if (ripdisp) { - /* - * The copied instruction uses the %rip-relative - * addressing mode. Adjust the displacement for the - * difference between the original location of this - * instruction and the location of the copy that will - * actually be run. The tricky bit here is making sure - * that the sign extension happens correctly in this - * calculation, since we need a signed 32-bit result to - * be sign-extended to 64 bits when it's added to the - * %rip value and yield the same 64-bit result that the - * sign-extension of the original signed 32-bit - * displacement would have given. - */ - s64 disp = (u8 *) p->addr + *ripdisp - (u8 *) p->ainsn.insn; - BUG_ON((s64) (s32) disp != disp); /* Sanity check. */ - *ripdisp = disp; - } - p->opcode = *p->addr; -} - -void __kprobes arch_arm_kprobe(struct kprobe *p) -{ - text_poke(p->addr, ((unsigned char []){BREAKPOINT_INSTRUCTION}), 1); -} - -void __kprobes arch_disarm_kprobe(struct kprobe *p) -{ - text_poke(p->addr, &p->opcode, 1); -} - -void __kprobes arch_remove_kprobe(struct kprobe *p) -{ - mutex_lock(&kprobe_mutex); - free_insn_slot(p->ainsn.insn, 0); - mutex_unlock(&kprobe_mutex); -} - -static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) -{ - kcb->prev_kprobe.kp = kprobe_running(); - kcb->prev_kprobe.status = kcb->kprobe_status; - kcb->prev_kprobe.old_rflags = kcb->kprobe_old_rflags; - kcb->prev_kprobe.saved_rflags = kcb->kprobe_saved_rflags; -} - -static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) -{ - __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; - kcb->kprobe_status = kcb->prev_kprobe.status; - kcb->kprobe_old_rflags = kcb->prev_kprobe.old_rflags; - kcb->kprobe_saved_rflags = kcb->prev_kprobe.saved_rflags; -} - -static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs, - struct kprobe_ctlblk *kcb) -{ - __get_cpu_var(current_kprobe) = p; - kcb->kprobe_saved_rflags = kcb->kprobe_old_rflags - = (regs->eflags & (TF_MASK | IF_MASK)); - if (is_IF_modifier(p->ainsn.insn)) - kcb->kprobe_saved_rflags &= ~IF_MASK; -} - -static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) -{ - regs->eflags |= TF_MASK; - regs->eflags &= ~IF_MASK; - /*single step inline if the instruction is an int3*/ - if (p->opcode == BREAKPOINT_INSTRUCTION) - regs->rip = (unsigned long)p->addr; - else - regs->rip = (unsigned long)p->ainsn.insn; -} - -/* Called with kretprobe_lock held */ -void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, - struct pt_regs *regs) -{ - unsigned long *sara = (unsigned long *)regs->rsp; - - ri->ret_addr = (kprobe_opcode_t *) *sara; - /* Replace the return addr with trampoline addr */ - *sara = (unsigned long) &kretprobe_trampoline; -} - -int __kprobes kprobe_handler(struct pt_regs *regs) -{ - struct kprobe *p; - int ret = 0; - kprobe_opcode_t *addr = (kprobe_opcode_t *)(regs->rip - sizeof(kprobe_opcode_t)); - struct kprobe_ctlblk *kcb; - - /* - * We don't want to be preempted for the entire - * duration of kprobe processing - */ - preempt_disable(); - kcb = get_kprobe_ctlblk(); - - /* Check we're not actually recursing */ - if (kprobe_running()) { - p = get_kprobe(addr); - if (p) { - if (kcb->kprobe_status == KPROBE_HIT_SS && - *p->ainsn.insn == BREAKPOINT_INSTRUCTION) { - regs->eflags &= ~TF_MASK; - regs->eflags |= kcb->kprobe_saved_rflags; - goto no_kprobe; - } else if (kcb->kprobe_status == KPROBE_HIT_SSDONE) { - /* TODO: Provide re-entrancy from - * post_kprobes_handler() and avoid exception - * stack corruption while single-stepping on - * the instruction of the new probe. - */ - arch_disarm_kprobe(p); - regs->rip = (unsigned long)p->addr; - reset_current_kprobe(); - ret = 1; - } else { - /* We have reentered the kprobe_handler(), since - * another probe was hit while within the - * handler. We here save the original kprobe - * variables and just single step on instruction - * of the new probe without calling any user - * handlers. - */ - save_previous_kprobe(kcb); - set_current_kprobe(p, regs, kcb); - kprobes_inc_nmissed_count(p); - prepare_singlestep(p, regs); - kcb->kprobe_status = KPROBE_REENTER; - return 1; - } - } else { - if (*addr != BREAKPOINT_INSTRUCTION) { - /* The breakpoint instruction was removed by - * another cpu right after we hit, no further - * handling of this interrupt is appropriate - */ - regs->rip = (unsigned long)addr; - ret = 1; - goto no_kprobe; - } - p = __get_cpu_var(current_kprobe); - if (p->break_handler && p->break_handler(p, regs)) { - goto ss_probe; - } - } - goto no_kprobe; - } - - p = get_kprobe(addr); - if (!p) { - if (*addr != BREAKPOINT_INSTRUCTION) { - /* - * The breakpoint instruction was removed right - * after we hit it. Another cpu has removed - * either a probepoint or a debugger breakpoint - * at this address. In either case, no further - * handling of this interrupt is appropriate. - * Back up over the (now missing) int3 and run - * the original instruction. - */ - regs->rip = (unsigned long)addr; - ret = 1; - } - /* Not one of ours: let kernel handle it */ - goto no_kprobe; - } - - set_current_kprobe(p, regs, kcb); - kcb->kprobe_status = KPROBE_HIT_ACTIVE; - - if (p->pre_handler && p->pre_handler(p, regs)) - /* handler has already set things up, so skip ss setup */ - return 1; - -ss_probe: - prepare_singlestep(p, regs); - kcb->kprobe_status = KPROBE_HIT_SS; - return 1; - -no_kprobe: - preempt_enable_no_resched(); - return ret; -} - -/* - * For function-return probes, init_kprobes() establishes a probepoint - * here. When a retprobed function returns, this probe is hit and - * trampoline_probe_handler() runs, calling the kretprobe's handler. - */ - void kretprobe_trampoline_holder(void) - { - asm volatile ( ".global kretprobe_trampoline\n" - "kretprobe_trampoline: \n" - "nop\n"); - } - -/* - * Called when we hit the probe point at kretprobe_trampoline - */ -int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) -{ - struct kretprobe_instance *ri = NULL; - struct hlist_head *head, empty_rp; - struct hlist_node *node, *tmp; - unsigned long flags, orig_ret_address = 0; - unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; - - INIT_HLIST_HEAD(&empty_rp); - spin_lock_irqsave(&kretprobe_lock, flags); - head = kretprobe_inst_table_head(current); - - /* - * It is possible to have multiple instances associated with a given - * task either because an multiple functions in the call path - * have a return probe installed on them, and/or more then one return - * return probe was registered for a target function. - * - * We can handle this because: - * - instances are always inserted at the head of the list - * - when multiple return probes are registered for the same - * function, the first instance's ret_addr will point to the - * real return address, and all the rest will point to - * kretprobe_trampoline - */ - hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { - if (ri->task != current) - /* another task is sharing our hash bucket */ - continue; - - if (ri->rp && ri->rp->handler) - ri->rp->handler(ri, regs); - - orig_ret_address = (unsigned long)ri->ret_addr; - recycle_rp_inst(ri, &empty_rp); - - if (orig_ret_address != trampoline_address) - /* - * This is the real return address. Any other - * instances associated with this task are for - * other calls deeper on the call stack - */ - break; - } - - kretprobe_assert(ri, orig_ret_address, trampoline_address); - regs->rip = orig_ret_address; - - reset_current_kprobe(); - spin_unlock_irqrestore(&kretprobe_lock, flags); - preempt_enable_no_resched(); - - hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) { - hlist_del(&ri->hlist); - kfree(ri); - } - /* - * By returning a non-zero value, we are telling - * kprobe_handler() that we don't want the post_handler - * to run (and have re-enabled preemption) - */ - return 1; -} - -/* - * Called after single-stepping. p->addr is the address of the - * instruction whose first byte has been replaced by the "int 3" - * instruction. To avoid the SMP problems that can occur when we - * temporarily put back the original opcode to single-step, we - * single-stepped a copy of the instruction. The address of this - * copy is p->ainsn.insn. - * - * This function prepares to return from the post-single-step - * interrupt. We have to fix up the stack as follows: - * - * 0) Except in the case of absolute or indirect jump or call instructions, - * the new rip is relative to the copied instruction. We need to make - * it relative to the original instruction. - * - * 1) If the single-stepped instruction was pushfl, then the TF and IF - * flags are set in the just-pushed eflags, and may need to be cleared. - * - * 2) If the single-stepped instruction was a call, the return address - * that is atop the stack is the address following the copied instruction. - * We need to make it the address following the original instruction. - */ -static void __kprobes resume_execution(struct kprobe *p, - struct pt_regs *regs, struct kprobe_ctlblk *kcb) -{ - unsigned long *tos = (unsigned long *)regs->rsp; - unsigned long next_rip = 0; - unsigned long copy_rip = (unsigned long)p->ainsn.insn; - unsigned long orig_rip = (unsigned long)p->addr; - kprobe_opcode_t *insn = p->ainsn.insn; - - /*skip the REX prefix*/ - if (*insn >= 0x40 && *insn <= 0x4f) - insn++; - - switch (*insn) { - case 0x9c: /* pushfl */ - *tos &= ~(TF_MASK | IF_MASK); - *tos |= kcb->kprobe_old_rflags; - break; - case 0xc3: /* ret/lret */ - case 0xcb: - case 0xc2: - case 0xca: - regs->eflags &= ~TF_MASK; - /* rip is already adjusted, no more changes required*/ - return; - case 0xe8: /* call relative - Fix return addr */ - *tos = orig_rip + (*tos - copy_rip); - break; - case 0xff: - if ((insn[1] & 0x30) == 0x10) { - /* call absolute, indirect */ - /* Fix return addr; rip is correct. */ - next_rip = regs->rip; - *tos = orig_rip + (*tos - copy_rip); - } else if (((insn[1] & 0x31) == 0x20) || /* jmp near, absolute indirect */ - ((insn[1] & 0x31) == 0x21)) { /* jmp far, absolute indirect */ - /* rip is correct. */ - next_rip = regs->rip; - } - break; - case 0xea: /* jmp absolute -- rip is correct */ - next_rip = regs->rip; - break; - default: - break; - } - - regs->eflags &= ~TF_MASK; - if (next_rip) { - regs->rip = next_rip; - } else { - regs->rip = orig_rip + (regs->rip - copy_rip); - } -} - -int __kprobes post_kprobe_handler(struct pt_regs *regs) -{ - struct kprobe *cur = kprobe_running(); - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - - if (!cur) - return 0; - - if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { - kcb->kprobe_status = KPROBE_HIT_SSDONE; - cur->post_handler(cur, regs, 0); - } - - resume_execution(cur, regs, kcb); - regs->eflags |= kcb->kprobe_saved_rflags; - - /* Restore the original saved kprobes variables and continue. */ - if (kcb->kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(kcb); - goto out; - } - reset_current_kprobe(); -out: - preempt_enable_no_resched(); - - /* - * if somebody else is singlestepping across a probe point, eflags - * will have TF set, in which case, continue the remaining processing - * of do_debug, as if this is not a probe hit. - */ - if (regs->eflags & TF_MASK) - return 0; - - return 1; -} - -int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) -{ - struct kprobe *cur = kprobe_running(); - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - const struct exception_table_entry *fixup; - - switch(kcb->kprobe_status) { - case KPROBE_HIT_SS: - case KPROBE_REENTER: - /* - * We are here because the instruction being single - * stepped caused a page fault. We reset the current - * kprobe and the rip points back to the probe address - * and allow the page fault handler to continue as a - * normal page fault. - */ - regs->rip = (unsigned long)cur->addr; - regs->eflags |= kcb->kprobe_old_rflags; - if (kcb->kprobe_status == KPROBE_REENTER) - restore_previous_kprobe(kcb); - else - reset_current_kprobe(); - preempt_enable_no_resched(); - break; - case KPROBE_HIT_ACTIVE: - case KPROBE_HIT_SSDONE: - /* - * We increment the nmissed count for accounting, - * we can also use npre/npostfault count for accouting - * these specific fault cases. - */ - kprobes_inc_nmissed_count(cur); - - /* - * We come here because instructions in the pre/post - * handler caused the page_fault, this could happen - * if handler tries to access user space by - * copy_from_user(), get_user() etc. Let the - * user-specified handler try to fix it first. - */ - if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) - return 1; - - /* - * In case the user-specified fault handler returned - * zero, try to fix up. - */ - fixup = search_exception_tables(regs->rip); - if (fixup) { - regs->rip = fixup->fixup; - return 1; - } - - /* - * fixup() could not handle it, - * Let do_page_fault() fix it. - */ - break; - default: - break; - } - return 0; -} - -/* - * Wrapper routine for handling exceptions. - */ -int __kprobes kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data) -{ - struct die_args *args = (struct die_args *)data; - int ret = NOTIFY_DONE; - - if (args->regs && user_mode(args->regs)) - return ret; - - switch (val) { - case DIE_INT3: - if (kprobe_handler(args->regs)) - ret = NOTIFY_STOP; - break; - case DIE_DEBUG: - if (post_kprobe_handler(args->regs)) - ret = NOTIFY_STOP; - break; - case DIE_GPF: - case DIE_PAGE_FAULT: - /* kprobe_running() needs smp_processor_id() */ - preempt_disable(); - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) - ret = NOTIFY_STOP; - preempt_enable(); - break; - default: - break; - } - return ret; -} - -int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) -{ - struct jprobe *jp = container_of(p, struct jprobe, kp); - unsigned long addr; - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - - kcb->jprobe_saved_regs = *regs; - kcb->jprobe_saved_rsp = (long *) regs->rsp; - addr = (unsigned long)(kcb->jprobe_saved_rsp); - /* - * As Linus pointed out, gcc assumes that the callee - * owns the argument space and could overwrite it, e.g. - * tailcall optimization. So, to be absolutely safe - * we also save and restore enough stack bytes to cover - * the argument area. - */ - memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr, - MIN_STACK_SIZE(addr)); - regs->eflags &= ~IF_MASK; - regs->rip = (unsigned long)(jp->entry); - return 1; -} - -void __kprobes jprobe_return(void) -{ - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - - asm volatile (" xchg %%rbx,%%rsp \n" - " int3 \n" - " .globl jprobe_return_end \n" - " jprobe_return_end: \n" - " nop \n"::"b" - (kcb->jprobe_saved_rsp):"memory"); -} - -int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) -{ - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - u8 *addr = (u8 *) (regs->rip - 1); - unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_rsp); - struct jprobe *jp = container_of(p, struct jprobe, kp); - - if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { - if ((long *)regs->rsp != kcb->jprobe_saved_rsp) { - struct pt_regs *saved_regs = - container_of(kcb->jprobe_saved_rsp, - struct pt_regs, rsp); - printk("current rsp %p does not match saved rsp %p\n", - (long *)regs->rsp, kcb->jprobe_saved_rsp); - printk("Saved registers for jprobe %p\n", jp); - show_registers(saved_regs); - printk("Current registers\n"); - show_registers(regs); - BUG(); - } - *regs = kcb->jprobe_saved_regs; - memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack, - MIN_STACK_SIZE(stack_addr)); - preempt_enable_no_resched(); - return 1; - } - return 0; -} - -static struct kprobe trampoline_p = { - .addr = (kprobe_opcode_t *) &kretprobe_trampoline, - .pre_handler = trampoline_probe_handler -}; - -int __init arch_init_kprobes(void) -{ - return register_kprobe(&trampoline_p); -} - -int __kprobes arch_trampoline_kprobe(struct kprobe *p) -{ - if (p->addr == (kprobe_opcode_t *)&kretprobe_trampoline) - return 1; - - return 0; -} diff --git a/arch/x86_64/kernel/ldt_64.c b/arch/x86_64/kernel/ldt_64.c deleted file mode 100644 index bc9ffd5c19c..00000000000 --- a/arch/x86_64/kernel/ldt_64.c +++ /dev/null @@ -1,252 +0,0 @@ -/* - * linux/arch/x86_64/kernel/ldt.c - * - * Copyright (C) 1992 Krishna Balasubramanian and Linus Torvalds - * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com> - * Copyright (C) 2002 Andi Kleen - * - * This handles calls from both 32bit and 64bit mode. - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/vmalloc.h> -#include <linux/slab.h> - -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/ldt.h> -#include <asm/desc.h> -#include <asm/proto.h> - -#ifdef CONFIG_SMP /* avoids "defined but not used" warnig */ -static void flush_ldt(void *null) -{ - if (current->active_mm) - load_LDT(¤t->active_mm->context); -} -#endif - -static int alloc_ldt(mm_context_t *pc, unsigned mincount, int reload) -{ - void *oldldt; - void *newldt; - unsigned oldsize; - - if (mincount <= (unsigned)pc->size) - return 0; - oldsize = pc->size; - mincount = (mincount+511)&(~511); - if (mincount*LDT_ENTRY_SIZE > PAGE_SIZE) - newldt = vmalloc(mincount*LDT_ENTRY_SIZE); - else - newldt = kmalloc(mincount*LDT_ENTRY_SIZE, GFP_KERNEL); - - if (!newldt) - return -ENOMEM; - - if (oldsize) - memcpy(newldt, pc->ldt, oldsize*LDT_ENTRY_SIZE); - oldldt = pc->ldt; - memset(newldt+oldsize*LDT_ENTRY_SIZE, 0, (mincount-oldsize)*LDT_ENTRY_SIZE); - wmb(); - pc->ldt = newldt; - wmb(); - pc->size = mincount; - wmb(); - if (reload) { -#ifdef CONFIG_SMP - cpumask_t mask; - - preempt_disable(); - mask = cpumask_of_cpu(smp_processor_id()); - load_LDT(pc); - if (!cpus_equal(current->mm->cpu_vm_mask, mask)) - smp_call_function(flush_ldt, NULL, 1, 1); - preempt_enable(); -#else - load_LDT(pc); -#endif - } - if (oldsize) { - if (oldsize*LDT_ENTRY_SIZE > PAGE_SIZE) - vfree(oldldt); - else - kfree(oldldt); - } - return 0; -} - -static inline int copy_ldt(mm_context_t *new, mm_context_t *old) -{ - int err = alloc_ldt(new, old->size, 0); - if (err < 0) - return err; - memcpy(new->ldt, old->ldt, old->size*LDT_ENTRY_SIZE); - return 0; -} - -/* - * we do not have to muck with descriptors here, that is - * done in switch_mm() as needed. - */ -int init_new_context(struct task_struct *tsk, struct mm_struct *mm) -{ - struct mm_struct * old_mm; - int retval = 0; - - init_MUTEX(&mm->context.sem); - mm->context.size = 0; - old_mm = current->mm; - if (old_mm && old_mm->context.size > 0) { - down(&old_mm->context.sem); - retval = copy_ldt(&mm->context, &old_mm->context); - up(&old_mm->context.sem); - } - return retval; -} - -/* - * - * Don't touch the LDT register - we're already in the next thread. - */ -void destroy_context(struct mm_struct *mm) -{ - if (mm->context.size) { - if ((unsigned)mm->context.size*LDT_ENTRY_SIZE > PAGE_SIZE) - vfree(mm->context.ldt); - else - kfree(mm->context.ldt); - mm->context.size = 0; - } -} - -static int read_ldt(void __user * ptr, unsigned long bytecount) -{ - int err; - unsigned long size; - struct mm_struct * mm = current->mm; - - if (!mm->context.size) - return 0; - if (bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES) - bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES; - - down(&mm->context.sem); - size = mm->context.size*LDT_ENTRY_SIZE; - if (size > bytecount) - size = bytecount; - - err = 0; - if (copy_to_user(ptr, mm->context.ldt, size)) - err = -EFAULT; - up(&mm->context.sem); - if (err < 0) - goto error_return; - if (size != bytecount) { - /* zero-fill the rest */ - if (clear_user(ptr+size, bytecount-size) != 0) { - err = -EFAULT; - goto error_return; - } - } - return bytecount; -error_return: - return err; -} - -static int read_default_ldt(void __user * ptr, unsigned long bytecount) -{ - /* Arbitrary number */ - /* x86-64 default LDT is all zeros */ - if (bytecount > 128) - bytecount = 128; - if (clear_user(ptr, bytecount)) - return -EFAULT; - return bytecount; -} - -static int write_ldt(void __user * ptr, unsigned long bytecount, int oldmode) -{ - struct task_struct *me = current; - struct mm_struct * mm = me->mm; - __u32 entry_1, entry_2, *lp; - int error; - struct user_desc ldt_info; - - error = -EINVAL; - - if (bytecount != sizeof(ldt_info)) - goto out; - error = -EFAULT; - if (copy_from_user(&ldt_info, ptr, bytecount)) - goto out; - - error = -EINVAL; - if (ldt_info.entry_number >= LDT_ENTRIES) - goto out; - if (ldt_info.contents == 3) { - if (oldmode) - goto out; - if (ldt_info.seg_not_present == 0) - goto out; - } - - down(&mm->context.sem); - if (ldt_info.entry_number >= (unsigned)mm->context.size) { - error = alloc_ldt(¤t->mm->context, ldt_info.entry_number+1, 1); - if (error < 0) - goto out_unlock; - } - - lp = (__u32 *) ((ldt_info.entry_number << 3) + (char *) mm->context.ldt); - - /* Allow LDTs to be cleared by the user. */ - if (ldt_info.base_addr == 0 && ldt_info.limit == 0) { - if (oldmode || LDT_empty(&ldt_info)) { - entry_1 = 0; - entry_2 = 0; - goto install; - } - } - - entry_1 = LDT_entry_a(&ldt_info); - entry_2 = LDT_entry_b(&ldt_info); - if (oldmode) - entry_2 &= ~(1 << 20); - - /* Install the new entry ... */ -install: - *lp = entry_1; - *(lp+1) = entry_2; - error = 0; - -out_unlock: - up(&mm->context.sem); -out: - return error; -} - -asmlinkage int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) -{ - int ret = -ENOSYS; - - switch (func) { - case 0: - ret = read_ldt(ptr, bytecount); - break; - case 1: - ret = write_ldt(ptr, bytecount, 1); - break; - case 2: - ret = read_default_ldt(ptr, bytecount); - break; - case 0x11: - ret = write_ldt(ptr, bytecount, 0); - break; - } - return ret; -} diff --git a/arch/x86_64/kernel/machine_kexec_64.c b/arch/x86_64/kernel/machine_kexec_64.c deleted file mode 100644 index c3a55470367..00000000000 --- a/arch/x86_64/kernel/machine_kexec_64.c +++ /dev/null @@ -1,259 +0,0 @@ -/* - * machine_kexec.c - handle transition of Linux booting another kernel - * Copyright (C) 2002-2005 Eric Biederman <ebiederm@xmission.com> - * - * This source code is licensed under the GNU General Public License, - * Version 2. See the file COPYING for more details. - */ - -#include <linux/mm.h> -#include <linux/kexec.h> -#include <linux/string.h> -#include <linux/reboot.h> -#include <asm/pgtable.h> -#include <asm/tlbflush.h> -#include <asm/mmu_context.h> -#include <asm/io.h> - -#define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE))) -static u64 kexec_pgd[512] PAGE_ALIGNED; -static u64 kexec_pud0[512] PAGE_ALIGNED; -static u64 kexec_pmd0[512] PAGE_ALIGNED; -static u64 kexec_pte0[512] PAGE_ALIGNED; -static u64 kexec_pud1[512] PAGE_ALIGNED; -static u64 kexec_pmd1[512] PAGE_ALIGNED; -static u64 kexec_pte1[512] PAGE_ALIGNED; - -static void init_level2_page(pmd_t *level2p, unsigned long addr) -{ - unsigned long end_addr; - - addr &= PAGE_MASK; - end_addr = addr + PUD_SIZE; - while (addr < end_addr) { - set_pmd(level2p++, __pmd(addr | __PAGE_KERNEL_LARGE_EXEC)); - addr += PMD_SIZE; - } -} - -static int init_level3_page(struct kimage *image, pud_t *level3p, - unsigned long addr, unsigned long last_addr) -{ - unsigned long end_addr; - int result; - - result = 0; - addr &= PAGE_MASK; - end_addr = addr + PGDIR_SIZE; - while ((addr < last_addr) && (addr < end_addr)) { - struct page *page; - pmd_t *level2p; - - page = kimage_alloc_control_pages(image, 0); - if (!page) { - result = -ENOMEM; - goto out; - } - level2p = (pmd_t *)page_address(page); - init_level2_page(level2p, addr); - set_pud(level3p++, __pud(__pa(level2p) | _KERNPG_TABLE)); - addr += PUD_SIZE; - } - /* clear the unused entries */ - while (addr < end_addr) { - pud_clear(level3p++); - addr += PUD_SIZE; - } -out: - return result; -} - - -static int init_level4_page(struct kimage *image, pgd_t *level4p, - unsigned long addr, unsigned long last_addr) -{ - unsigned long end_addr; - int result; - - result = 0; - addr &= PAGE_MASK; - end_addr = addr + (PTRS_PER_PGD * PGDIR_SIZE); - while ((addr < last_addr) && (addr < end_addr)) { - struct page *page; - pud_t *level3p; - - page = kimage_alloc_control_pages(image, 0); - if (!page) { - result = -ENOMEM; - goto out; - } - level3p = (pud_t *)page_address(page); - result = init_level3_page(image, level3p, addr, last_addr); - if (result) { - goto out; - } - set_pgd(level4p++, __pgd(__pa(level3p) | _KERNPG_TABLE)); - addr += PGDIR_SIZE; - } - /* clear the unused entries */ - while (addr < end_addr) { - pgd_clear(level4p++); - addr += PGDIR_SIZE; - } -out: - return result; -} - - -static int init_pgtable(struct kimage *image, unsigned long start_pgtable) -{ - pgd_t *level4p; - level4p = (pgd_t *)__va(start_pgtable); - return init_level4_page(image, level4p, 0, end_pfn << PAGE_SHIFT); -} - -static void set_idt(void *newidt, u16 limit) -{ - struct desc_ptr curidt; - - /* x86-64 supports unaliged loads & stores */ - curidt.size = limit; - curidt.address = (unsigned long)newidt; - - __asm__ __volatile__ ( - "lidtq %0\n" - : : "m" (curidt) - ); -}; - - -static void set_gdt(void *newgdt, u16 limit) -{ - struct desc_ptr curgdt; - - /* x86-64 supports unaligned loads & stores */ - curgdt.size = limit; - curgdt.address = (unsigned long)newgdt; - - __asm__ __volatile__ ( - "lgdtq %0\n" - : : "m" (curgdt) - ); -}; - -static void load_segments(void) -{ - __asm__ __volatile__ ( - "\tmovl %0,%%ds\n" - "\tmovl %0,%%es\n" - "\tmovl %0,%%ss\n" - "\tmovl %0,%%fs\n" - "\tmovl %0,%%gs\n" - : : "a" (__KERNEL_DS) : "memory" - ); -} - -int machine_kexec_prepare(struct kimage *image) -{ - unsigned long start_pgtable; - int result; - - /* Calculate the offsets */ - start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT; - - /* Setup the identity mapped 64bit page table */ - result = init_pgtable(image, start_pgtable); - if (result) - return result; - - return 0; -} - -void machine_kexec_cleanup(struct kimage *image) -{ - return; -} - -/* - * Do not allocate memory (or fail in any way) in machine_kexec(). - * We are past the point of no return, committed to rebooting now. - */ -NORET_TYPE void machine_kexec(struct kimage *image) -{ - unsigned long page_list[PAGES_NR]; - void *control_page; - - /* Interrupts aren't acceptable while we reboot */ - local_irq_disable(); - - control_page = page_address(image->control_code_page) + PAGE_SIZE; - memcpy(control_page, relocate_kernel, PAGE_SIZE); - - page_list[PA_CONTROL_PAGE] = virt_to_phys(control_page); - page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel; - page_list[PA_PGD] = virt_to_phys(&kexec_pgd); - page_list[VA_PGD] = (unsigned long)kexec_pgd; - page_list[PA_PUD_0] = virt_to_phys(&kexec_pud0); - page_list[VA_PUD_0] = (unsigned long)kexec_pud0; - page_list[PA_PMD_0] = virt_to_phys(&kexec_pmd0); - page_list[VA_PMD_0] = (unsigned long)kexec_pmd0; - page_list[PA_PTE_0] = virt_to_phys(&kexec_pte0); - page_list[VA_PTE_0] = (unsigned long)kexec_pte0; - page_list[PA_PUD_1] = virt_to_phys(&kexec_pud1); - page_list[VA_PUD_1] = (unsigned long)kexec_pud1; - page_list[PA_PMD_1] = virt_to_phys(&kexec_pmd1); - page_list[VA_PMD_1] = (unsigned long)kexec_pmd1; - page_list[PA_PTE_1] = virt_to_phys(&kexec_pte1); - page_list[VA_PTE_1] = (unsigned long)kexec_pte1; - - page_list[PA_TABLE_PAGE] = - (unsigned long)__pa(page_address(image->control_code_page)); - - /* The segment registers are funny things, they have both a - * visible and an invisible part. Whenever the visible part is - * set to a specific selector, the invisible part is loaded - * with from a table in memory. At no other time is the - * descriptor table in memory accessed. - * - * I take advantage of this here by force loading the - * segments, before I zap the gdt with an invalid value. - */ - load_segments(); - /* The gdt & idt are now invalid. - * If you want to load them you must set up your own idt & gdt. - */ - set_gdt(phys_to_virt(0),0); - set_idt(phys_to_virt(0),0); - - /* now call it */ - relocate_kernel((unsigned long)image->head, (unsigned long)page_list, - image->start); -} - -/* crashkernel=size@addr specifies the location to reserve for - * a crash kernel. By reserving this memory we guarantee - * that linux never set's it up as a DMA target. - * Useful for holding code to do something appropriate - * after a kernel panic. - */ -static int __init setup_crashkernel(char *arg) -{ - unsigned long size, base; - char *p; - if (!arg) - return -EINVAL; - size = memparse(arg, &p); - if (arg == p) - return -EINVAL; - if (*p == '@') { - base = memparse(p+1, &p); - /* FIXME: Do I want a sanity check to validate the - * memory range? Yes you do, but it's too early for - * e820 -AK */ - crashk_res.start = base; - crashk_res.end = base + size - 1; - } - return 0; -} -early_param("crashkernel", setup_crashkernel); - diff --git a/arch/x86_64/kernel/mce_64.c b/arch/x86_64/kernel/mce_64.c deleted file mode 100644 index a66d607f5b9..00000000000 --- a/arch/x86_64/kernel/mce_64.c +++ /dev/null @@ -1,875 +0,0 @@ -/* - * Machine check handler. - * K8 parts Copyright 2002,2003 Andi Kleen, SuSE Labs. - * Rest from unknown author(s). - * 2004 Andi Kleen. Rewrote most of it. - */ - -#include <linux/init.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/rcupdate.h> -#include <linux/kallsyms.h> -#include <linux/sysdev.h> -#include <linux/miscdevice.h> -#include <linux/fs.h> -#include <linux/capability.h> -#include <linux/cpu.h> -#include <linux/percpu.h> -#include <linux/poll.h> -#include <linux/thread_info.h> -#include <linux/ctype.h> -#include <linux/kmod.h> -#include <linux/kdebug.h> -#include <asm/processor.h> -#include <asm/msr.h> -#include <asm/mce.h> -#include <asm/uaccess.h> -#include <asm/smp.h> -#include <asm/idle.h> - -#define MISC_MCELOG_MINOR 227 -#define NR_BANKS 6 - -atomic_t mce_entry; - -static int mce_dont_init; - -/* - * Tolerant levels: - * 0: always panic on uncorrected errors, log corrected errors - * 1: panic or SIGBUS on uncorrected errors, log corrected errors - * 2: SIGBUS or log uncorrected errors (if possible), log corrected errors - * 3: never panic or SIGBUS, log all errors (for testing only) - */ -static int tolerant = 1; -static int banks; -static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL }; -static unsigned long notify_user; -static int rip_msr; -static int mce_bootlog = 1; -static atomic_t mce_events; - -static char trigger[128]; -static char *trigger_argv[2] = { trigger, NULL }; - -static DECLARE_WAIT_QUEUE_HEAD(mce_wait); - -/* - * Lockless MCE logging infrastructure. - * This avoids deadlocks on printk locks without having to break locks. Also - * separate MCEs from kernel messages to avoid bogus bug reports. - */ - -struct mce_log mcelog = { - MCE_LOG_SIGNATURE, - MCE_LOG_LEN, -}; - -void mce_log(struct mce *mce) -{ - unsigned next, entry; - atomic_inc(&mce_events); - mce->finished = 0; - wmb(); - for (;;) { - entry = rcu_dereference(mcelog.next); - /* The rmb forces the compiler to reload next in each - iteration */ - rmb(); - for (;;) { - /* When the buffer fills up discard new entries. Assume - that the earlier errors are the more interesting. */ - if (entry >= MCE_LOG_LEN) { - set_bit(MCE_OVERFLOW, &mcelog.flags); - return; - } - /* Old left over entry. Skip. */ - if (mcelog.entry[entry].finished) { - entry++; - continue; - } - break; - } - smp_rmb(); - next = entry + 1; - if (cmpxchg(&mcelog.next, entry, next) == entry) - break; - } - memcpy(mcelog.entry + entry, mce, sizeof(struct mce)); - wmb(); - mcelog.entry[entry].finished = 1; - wmb(); - - set_bit(0, ¬ify_user); -} - -static void print_mce(struct mce *m) -{ - printk(KERN_EMERG "\n" - KERN_EMERG "HARDWARE ERROR\n" - KERN_EMERG - "CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n", - m->cpu, m->mcgstatus, m->bank, m->status); - if (m->rip) { - printk(KERN_EMERG - "RIP%s %02x:<%016Lx> ", - !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "", - m->cs, m->rip); - if (m->cs == __KERNEL_CS) - print_symbol("{%s}", m->rip); - printk("\n"); - } - printk(KERN_EMERG "TSC %Lx ", m->tsc); - if (m->addr) - printk("ADDR %Lx ", m->addr); - if (m->misc) - printk("MISC %Lx ", m->misc); - printk("\n"); - printk(KERN_EMERG "This is not a software problem!\n"); - printk(KERN_EMERG - "Run through mcelog --ascii to decode and contact your hardware vendor\n"); -} - -static void mce_panic(char *msg, struct mce *backup, unsigned long start) -{ - int i; - - oops_begin(); - for (i = 0; i < MCE_LOG_LEN; i++) { - unsigned long tsc = mcelog.entry[i].tsc; - if (time_before(tsc, start)) - continue; - print_mce(&mcelog.entry[i]); - if (backup && mcelog.entry[i].tsc == backup->tsc) - backup = NULL; - } - if (backup) - print_mce(backup); - panic(msg); -} - -static int mce_available(struct cpuinfo_x86 *c) -{ - return cpu_has(c, X86_FEATURE_MCE) && cpu_has(c, X86_FEATURE_MCA); -} - -static inline void mce_get_rip(struct mce *m, struct pt_regs *regs) -{ - if (regs && (m->mcgstatus & MCG_STATUS_RIPV)) { - m->rip = regs->rip; - m->cs = regs->cs; - } else { - m->rip = 0; - m->cs = 0; - } - if (rip_msr) { - /* Assume the RIP in the MSR is exact. Is this true? */ - m->mcgstatus |= MCG_STATUS_EIPV; - rdmsrl(rip_msr, m->rip); - m->cs = 0; - } -} - -/* - * The actual machine check handler - */ - -void do_machine_check(struct pt_regs * regs, long error_code) -{ - struct mce m, panicm; - u64 mcestart = 0; - int i; - int panicm_found = 0; - /* - * If no_way_out gets set, there is no safe way to recover from this - * MCE. If tolerant is cranked up, we'll try anyway. - */ - int no_way_out = 0; - /* - * If kill_it gets set, there might be a way to recover from this - * error. - */ - int kill_it = 0; - - atomic_inc(&mce_entry); - - if (regs) - notify_die(DIE_NMI, "machine check", regs, error_code, 18, SIGKILL); - if (!banks) - goto out2; - - memset(&m, 0, sizeof(struct mce)); - m.cpu = smp_processor_id(); - rdmsrl(MSR_IA32_MCG_STATUS, m.mcgstatus); - /* if the restart IP is not valid, we're done for */ - if (!(m.mcgstatus & MCG_STATUS_RIPV)) - no_way_out = 1; - - rdtscll(mcestart); - barrier(); - - for (i = 0; i < banks; i++) { - if (!bank[i]) - continue; - - m.misc = 0; - m.addr = 0; - m.bank = i; - m.tsc = 0; - - rdmsrl(MSR_IA32_MC0_STATUS + i*4, m.status); - if ((m.status & MCI_STATUS_VAL) == 0) - continue; - - if (m.status & MCI_STATUS_EN) { - /* if PCC was set, there's no way out */ - no_way_out |= !!(m.status & MCI_STATUS_PCC); - /* - * If this error was uncorrectable and there was - * an overflow, we're in trouble. If no overflow, - * we might get away with just killing a task. - */ - if (m.status & MCI_STATUS_UC) { - if (tolerant < 1 || m.status & MCI_STATUS_OVER) - no_way_out = 1; - kill_it = 1; - } - } - - if (m.status & MCI_STATUS_MISCV) - rdmsrl(MSR_IA32_MC0_MISC + i*4, m.misc); - if (m.status & MCI_STATUS_ADDRV) - rdmsrl(MSR_IA32_MC0_ADDR + i*4, m.addr); - - mce_get_rip(&m, regs); - if (error_code >= 0) - rdtscll(m.tsc); - if (error_code != -2) - mce_log(&m); - - /* Did this bank cause the exception? */ - /* Assume that the bank with uncorrectable errors did it, - and that there is only a single one. */ - if ((m.status & MCI_STATUS_UC) && (m.status & MCI_STATUS_EN)) { - panicm = m; - panicm_found = 1; - } - - add_taint(TAINT_MACHINE_CHECK); - } - - /* Never do anything final in the polling timer */ - if (!regs) - goto out; - - /* If we didn't find an uncorrectable error, pick - the last one (shouldn't happen, just being safe). */ - if (!panicm_found) - panicm = m; - - /* - * If we have decided that we just CAN'T continue, and the user - * has not set tolerant to an insane level, give up and die. - */ - if (no_way_out && tolerant < 3) - mce_panic("Machine check", &panicm, mcestart); - - /* - * If the error seems to be unrecoverable, something should be - * done. Try to kill as little as possible. If we can kill just - * one task, do that. If the user has set the tolerance very - * high, don't try to do anything at all. - */ - if (kill_it && tolerant < 3) { - int user_space = 0; - - /* - * If the EIPV bit is set, it means the saved IP is the - * instruction which caused the MCE. - */ - if (m.mcgstatus & MCG_STATUS_EIPV) - user_space = panicm.rip && (panicm.cs & 3); - - /* - * If we know that the error was in user space, send a - * SIGBUS. Otherwise, panic if tolerance is low. - * - * do_exit() takes an awful lot of locks and has a slight - * risk of deadlocking. - */ - if (user_space) { - do_exit(SIGBUS); - } else if (panic_on_oops || tolerant < 2) { - mce_panic("Uncorrected machine check", - &panicm, mcestart); - } - } - - /* notify userspace ASAP */ - set_thread_flag(TIF_MCE_NOTIFY); - - out: - /* the last thing we do is clear state */ - for (i = 0; i < banks; i++) - wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0); - wrmsrl(MSR_IA32_MCG_STATUS, 0); - out2: - atomic_dec(&mce_entry); -} - -#ifdef CONFIG_X86_MCE_INTEL -/*** - * mce_log_therm_throt_event - Logs the thermal throttling event to mcelog - * @cpu: The CPU on which the event occured. - * @status: Event status information - * - * This function should be called by the thermal interrupt after the - * event has been processed and the decision was made to log the event - * further. - * - * The status parameter will be saved to the 'status' field of 'struct mce' - * and historically has been the register value of the - * MSR_IA32_THERMAL_STATUS (Intel) msr. - */ -void mce_log_therm_throt_event(unsigned int cpu, __u64 status) -{ - struct mce m; - - memset(&m, 0, sizeof(m)); - m.cpu = cpu; - m.bank = MCE_THERMAL_BANK; - m.status = status; - rdtscll(m.tsc); - mce_log(&m); -} -#endif /* CONFIG_X86_MCE_INTEL */ - -/* - * Periodic polling timer for "silent" machine check errors. If the - * poller finds an MCE, poll 2x faster. When the poller finds no more - * errors, poll 2x slower (up to check_interval seconds). - */ - -static int check_interval = 5 * 60; /* 5 minutes */ -static int next_interval; /* in jiffies */ -static void mcheck_timer(struct work_struct *work); -static DECLARE_DELAYED_WORK(mcheck_work, mcheck_timer); - -static void mcheck_check_cpu(void *info) -{ - if (mce_available(¤t_cpu_data)) - do_machine_check(NULL, 0); -} - -static void mcheck_timer(struct work_struct *work) -{ - on_each_cpu(mcheck_check_cpu, NULL, 1, 1); - - /* - * Alert userspace if needed. If we logged an MCE, reduce the - * polling interval, otherwise increase the polling interval. - */ - if (mce_notify_user()) { - next_interval = max(next_interval/2, HZ/100); - } else { - next_interval = min(next_interval*2, - (int)round_jiffies_relative(check_interval*HZ)); - } - - schedule_delayed_work(&mcheck_work, next_interval); -} - -/* - * This is only called from process context. This is where we do - * anything we need to alert userspace about new MCEs. This is called - * directly from the poller and also from entry.S and idle, thanks to - * TIF_MCE_NOTIFY. - */ -int mce_notify_user(void) -{ - clear_thread_flag(TIF_MCE_NOTIFY); - if (test_and_clear_bit(0, ¬ify_user)) { - static unsigned long last_print; - unsigned long now = jiffies; - - wake_up_interruptible(&mce_wait); - if (trigger[0]) - call_usermodehelper(trigger, trigger_argv, NULL, - UMH_NO_WAIT); - - if (time_after_eq(now, last_print + (check_interval*HZ))) { - last_print = now; - printk(KERN_INFO "Machine check events logged\n"); - } - - return 1; - } - return 0; -} - -/* see if the idle task needs to notify userspace */ -static int -mce_idle_callback(struct notifier_block *nfb, unsigned long action, void *junk) -{ - /* IDLE_END should be safe - interrupts are back on */ - if (action == IDLE_END && test_thread_flag(TIF_MCE_NOTIFY)) - mce_notify_user(); - - return NOTIFY_OK; -} - -static struct notifier_block mce_idle_notifier = { - .notifier_call = mce_idle_callback, -}; - -static __init int periodic_mcheck_init(void) -{ - next_interval = check_interval * HZ; - if (next_interval) - schedule_delayed_work(&mcheck_work, - round_jiffies_relative(next_interval)); - idle_notifier_register(&mce_idle_notifier); - return 0; -} -__initcall(periodic_mcheck_init); - - -/* - * Initialize Machine Checks for a CPU. - */ -static void mce_init(void *dummy) -{ - u64 cap; - int i; - - rdmsrl(MSR_IA32_MCG_CAP, cap); - banks = cap & 0xff; - if (banks > NR_BANKS) { - printk(KERN_INFO "MCE: warning: using only %d banks\n", banks); - banks = NR_BANKS; - } - /* Use accurate RIP reporting if available. */ - if ((cap & (1<<9)) && ((cap >> 16) & 0xff) >= 9) - rip_msr = MSR_IA32_MCG_EIP; - - /* Log the machine checks left over from the previous reset. - This also clears all registers */ - do_machine_check(NULL, mce_bootlog ? -1 : -2); - - set_in_cr4(X86_CR4_MCE); - - if (cap & MCG_CTL_P) - wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); - - for (i = 0; i < banks; i++) { - wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]); - wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0); - } -} - -/* Add per CPU specific workarounds here */ -static void __cpuinit mce_cpu_quirks(struct cpuinfo_x86 *c) -{ - /* This should be disabled by the BIOS, but isn't always */ - if (c->x86_vendor == X86_VENDOR_AMD && c->x86 == 15) { - /* disable GART TBL walk error reporting, which trips off - incorrectly with the IOMMU & 3ware & Cerberus. */ - clear_bit(10, &bank[4]); - /* Lots of broken BIOS around that don't clear them - by default and leave crap in there. Don't log. */ - mce_bootlog = 0; - } - -} - -static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c) -{ - switch (c->x86_vendor) { - case X86_VENDOR_INTEL: - mce_intel_feature_init(c); - break; - case X86_VENDOR_AMD: - mce_amd_feature_init(c); - break; - default: - break; - } -} - -/* - * Called for each booted CPU to set up machine checks. - * Must be called with preempt off. - */ -void __cpuinit mcheck_init(struct cpuinfo_x86 *c) -{ - static cpumask_t mce_cpus = CPU_MASK_NONE; - - mce_cpu_quirks(c); - - if (mce_dont_init || - cpu_test_and_set(smp_processor_id(), mce_cpus) || - !mce_available(c)) - return; - - mce_init(NULL); - mce_cpu_features(c); -} - -/* - * Character device to read and clear the MCE log. - */ - -static DEFINE_SPINLOCK(mce_state_lock); -static int open_count; /* #times opened */ -static int open_exclu; /* already open exclusive? */ - -static int mce_open(struct inode *inode, struct file *file) -{ - spin_lock(&mce_state_lock); - - if (open_exclu || (open_count && (file->f_flags & O_EXCL))) { - spin_unlock(&mce_state_lock); - return -EBUSY; - } - - if (file->f_flags & O_EXCL) - open_exclu = 1; - open_count++; - - spin_unlock(&mce_state_lock); - - return nonseekable_open(inode, file); -} - -static int mce_release(struct inode *inode, struct file *file) -{ - spin_lock(&mce_state_lock); - - open_count--; - open_exclu = 0; - - spin_unlock(&mce_state_lock); - - return 0; -} - -static void collect_tscs(void *data) -{ - unsigned long *cpu_tsc = (unsigned long *)data; - rdtscll(cpu_tsc[smp_processor_id()]); -} - -static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize, loff_t *off) -{ - unsigned long *cpu_tsc; - static DECLARE_MUTEX(mce_read_sem); - unsigned next; - char __user *buf = ubuf; - int i, err; - - cpu_tsc = kmalloc(NR_CPUS * sizeof(long), GFP_KERNEL); - if (!cpu_tsc) - return -ENOMEM; - - down(&mce_read_sem); - next = rcu_dereference(mcelog.next); - - /* Only supports full reads right now */ - if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) { - up(&mce_read_sem); - kfree(cpu_tsc); - return -EINVAL; - } - - err = 0; - for (i = 0; i < next; i++) { - unsigned long start = jiffies; - while (!mcelog.entry[i].finished) { - if (time_after_eq(jiffies, start + 2)) { - memset(mcelog.entry + i,0, sizeof(struct mce)); - goto timeout; - } - cpu_relax(); - } - smp_rmb(); - err |= copy_to_user(buf, mcelog.entry + i, sizeof(struct mce)); - buf += sizeof(struct mce); - timeout: - ; - } - - memset(mcelog.entry, 0, next * sizeof(struct mce)); - mcelog.next = 0; - - synchronize_sched(); - - /* Collect entries that were still getting written before the synchronize. */ - - on_each_cpu(collect_tscs, cpu_tsc, 1, 1); - for (i = next; i < MCE_LOG_LEN; i++) { - if (mcelog.entry[i].finished && - mcelog.entry[i].tsc < cpu_tsc[mcelog.entry[i].cpu]) { - err |= copy_to_user(buf, mcelog.entry+i, sizeof(struct mce)); - smp_rmb(); - buf += sizeof(struct mce); - memset(&mcelog.entry[i], 0, sizeof(struct mce)); - } - } - up(&mce_read_sem); - kfree(cpu_tsc); - return err ? -EFAULT : buf - ubuf; -} - -static unsigned int mce_poll(struct file *file, poll_table *wait) -{ - poll_wait(file, &mce_wait, wait); - if (rcu_dereference(mcelog.next)) - return POLLIN | POLLRDNORM; - return 0; -} - -static int mce_ioctl(struct inode *i, struct file *f,unsigned int cmd, unsigned long arg) -{ - int __user *p = (int __user *)arg; - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - switch (cmd) { - case MCE_GET_RECORD_LEN: - return put_user(sizeof(struct mce), p); - case MCE_GET_LOG_LEN: - return put_user(MCE_LOG_LEN, p); - case MCE_GETCLEAR_FLAGS: { - unsigned flags; - do { - flags = mcelog.flags; - } while (cmpxchg(&mcelog.flags, flags, 0) != flags); - return put_user(flags, p); - } - default: - return -ENOTTY; - } -} - -static const struct file_operations mce_chrdev_ops = { - .open = mce_open, - .release = mce_release, - .read = mce_read, - .poll = mce_poll, - .ioctl = mce_ioctl, -}; - -static struct miscdevice mce_log_device = { - MISC_MCELOG_MINOR, - "mcelog", - &mce_chrdev_ops, -}; - -static unsigned long old_cr4 __initdata; - -void __init stop_mce(void) -{ - old_cr4 = read_cr4(); - clear_in_cr4(X86_CR4_MCE); -} - -void __init restart_mce(void) -{ - if (old_cr4 & X86_CR4_MCE) - set_in_cr4(X86_CR4_MCE); -} - -/* - * Old style boot options parsing. Only for compatibility. - */ - -static int __init mcheck_disable(char *str) -{ - mce_dont_init = 1; - return 1; -} - -/* mce=off disables machine check. Note you can reenable it later - using sysfs. - mce=TOLERANCELEVEL (number, see above) - mce=bootlog Log MCEs from before booting. Disabled by default on AMD. - mce=nobootlog Don't log MCEs from before booting. */ -static int __init mcheck_enable(char *str) -{ - if (*str == '=') - str++; - if (!strcmp(str, "off")) - mce_dont_init = 1; - else if (!strcmp(str, "bootlog") || !strcmp(str,"nobootlog")) - mce_bootlog = str[0] == 'b'; - else if (isdigit(str[0])) - get_option(&str, &tolerant); - else - printk("mce= argument %s ignored. Please use /sys", str); - return 1; -} - -__setup("nomce", mcheck_disable); -__setup("mce", mcheck_enable); - -/* - * Sysfs support - */ - -/* On resume clear all MCE state. Don't want to see leftovers from the BIOS. - Only one CPU is active at this time, the others get readded later using - CPU hotplug. */ -static int mce_resume(struct sys_device *dev) -{ - mce_init(NULL); - return 0; -} - -/* Reinit MCEs after user configuration changes */ -static void mce_restart(void) -{ - if (next_interval) - cancel_delayed_work(&mcheck_work); - /* Timer race is harmless here */ - on_each_cpu(mce_init, NULL, 1, 1); - next_interval = check_interval * HZ; - if (next_interval) - schedule_delayed_work(&mcheck_work, - round_jiffies_relative(next_interval)); -} - -static struct sysdev_class mce_sysclass = { - .resume = mce_resume, - set_kset_name("machinecheck"), -}; - -DEFINE_PER_CPU(struct sys_device, device_mce); - -/* Why are there no generic functions for this? */ -#define ACCESSOR(name, var, start) \ - static ssize_t show_ ## name(struct sys_device *s, char *buf) { \ - return sprintf(buf, "%lx\n", (unsigned long)var); \ - } \ - static ssize_t set_ ## name(struct sys_device *s,const char *buf,size_t siz) { \ - char *end; \ - unsigned long new = simple_strtoul(buf, &end, 0); \ - if (end == buf) return -EINVAL; \ - var = new; \ - start; \ - return end-buf; \ - } \ - static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name); - -/* TBD should generate these dynamically based on number of available banks */ -ACCESSOR(bank0ctl,bank[0],mce_restart()) -ACCESSOR(bank1ctl,bank[1],mce_restart()) -ACCESSOR(bank2ctl,bank[2],mce_restart()) -ACCESSOR(bank3ctl,bank[3],mce_restart()) -ACCESSOR(bank4ctl,bank[4],mce_restart()) -ACCESSOR(bank5ctl,bank[5],mce_restart()) - -static ssize_t show_trigger(struct sys_device *s, char *buf) -{ - strcpy(buf, trigger); - strcat(buf, "\n"); - return strlen(trigger) + 1; -} - -static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz) -{ - char *p; - int len; - strncpy(trigger, buf, sizeof(trigger)); - trigger[sizeof(trigger)-1] = 0; - len = strlen(trigger); - p = strchr(trigger, '\n'); - if (*p) *p = 0; - return len; -} - -static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger); -ACCESSOR(tolerant,tolerant,) -ACCESSOR(check_interval,check_interval,mce_restart()) -static struct sysdev_attribute *mce_attributes[] = { - &attr_bank0ctl, &attr_bank1ctl, &attr_bank2ctl, - &attr_bank3ctl, &attr_bank4ctl, &attr_bank5ctl, - &attr_tolerant, &attr_check_interval, &attr_trigger, - NULL -}; - -/* Per cpu sysdev init. All of the cpus still share the same ctl bank */ -static __cpuinit int mce_create_device(unsigned int cpu) -{ - int err; - int i; - if (!mce_available(&cpu_data[cpu])) - return -EIO; - - per_cpu(device_mce,cpu).id = cpu; - per_cpu(device_mce,cpu).cls = &mce_sysclass; - - err = sysdev_register(&per_cpu(device_mce,cpu)); - - if (!err) { - for (i = 0; mce_attributes[i]; i++) - sysdev_create_file(&per_cpu(device_mce,cpu), - mce_attributes[i]); - } - return err; -} - -static void mce_remove_device(unsigned int cpu) -{ - int i; - - for (i = 0; mce_attributes[i]; i++) - sysdev_remove_file(&per_cpu(device_mce,cpu), - mce_attributes[i]); - sysdev_unregister(&per_cpu(device_mce,cpu)); - memset(&per_cpu(device_mce, cpu).kobj, 0, sizeof(struct kobject)); -} - -/* Get notified when a cpu comes on/off. Be hotplug friendly. */ -static int -mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) -{ - unsigned int cpu = (unsigned long)hcpu; - - switch (action) { - case CPU_ONLINE: - case CPU_ONLINE_FROZEN: - mce_create_device(cpu); - break; - case CPU_DEAD: - case CPU_DEAD_FROZEN: - mce_remove_device(cpu); - break; - } - return NOTIFY_OK; -} - -static struct notifier_block mce_cpu_notifier = { - .notifier_call = mce_cpu_callback, -}; - -static __init int mce_init_device(void) -{ - int err; - int i = 0; - - if (!mce_available(&boot_cpu_data)) - return -EIO; - err = sysdev_class_register(&mce_sysclass); - - for_each_online_cpu(i) { - mce_create_device(i); - } - - register_hotcpu_notifier(&mce_cpu_notifier); - misc_register(&mce_log_device); - return err; -} - -device_initcall(mce_init_device); diff --git a/arch/x86_64/kernel/mce_amd_64.c b/arch/x86_64/kernel/mce_amd_64.c deleted file mode 100644 index 2f8a7f18b0f..00000000000 --- a/arch/x86_64/kernel/mce_amd_64.c +++ /dev/null @@ -1,689 +0,0 @@ -/* - * (c) 2005, 2006 Advanced Micro Devices, Inc. - * Your use of this code is subject to the terms and conditions of the - * GNU general public license version 2. See "COPYING" or - * http://www.gnu.org/licenses/gpl.html - * - * Written by Jacob Shin - AMD, Inc. - * - * Support : jacob.shin@amd.com - * - * April 2006 - * - added support for AMD Family 0x10 processors - * - * All MC4_MISCi registers are shared between multi-cores - */ - -#include <linux/cpu.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/kobject.h> -#include <linux/notifier.h> -#include <linux/sched.h> -#include <linux/smp.h> -#include <linux/sysdev.h> -#include <linux/sysfs.h> -#include <asm/apic.h> -#include <asm/mce.h> -#include <asm/msr.h> -#include <asm/percpu.h> -#include <asm/idle.h> - -#define PFX "mce_threshold: " -#define VERSION "version 1.1.1" -#define NR_BANKS 6 -#define NR_BLOCKS 9 -#define THRESHOLD_MAX 0xFFF -#define INT_TYPE_APIC 0x00020000 -#define MASK_VALID_HI 0x80000000 -#define MASK_CNTP_HI 0x40000000 -#define MASK_LOCKED_HI 0x20000000 -#define MASK_LVTOFF_HI 0x00F00000 -#define MASK_COUNT_EN_HI 0x00080000 -#define MASK_INT_TYPE_HI 0x00060000 -#define MASK_OVERFLOW_HI 0x00010000 -#define MASK_ERR_COUNT_HI 0x00000FFF -#define MASK_BLKPTR_LO 0xFF000000 -#define MCG_XBLK_ADDR 0xC0000400 - -struct threshold_block { - unsigned int block; - unsigned int bank; - unsigned int cpu; - u32 address; - u16 interrupt_enable; - u16 threshold_limit; - struct kobject kobj; - struct list_head miscj; -}; - -/* defaults used early on boot */ -static struct threshold_block threshold_defaults = { - .interrupt_enable = 0, - .threshold_limit = THRESHOLD_MAX, -}; - -struct threshold_bank { - struct kobject kobj; - struct threshold_block *blocks; - cpumask_t cpus; -}; -static DEFINE_PER_CPU(struct threshold_bank *, threshold_banks[NR_BANKS]); - -#ifdef CONFIG_SMP -static unsigned char shared_bank[NR_BANKS] = { - 0, 0, 0, 0, 1 -}; -#endif - -static DEFINE_PER_CPU(unsigned char, bank_map); /* see which banks are on */ - -/* - * CPU Initialization - */ - -/* must be called with correct cpu affinity */ -static void threshold_restart_bank(struct threshold_block *b, - int reset, u16 old_limit) -{ - u32 mci_misc_hi, mci_misc_lo; - - rdmsr(b->address, mci_misc_lo, mci_misc_hi); - - if (b->threshold_limit < (mci_misc_hi & THRESHOLD_MAX)) - reset = 1; /* limit cannot be lower than err count */ - - if (reset) { /* reset err count and overflow bit */ - mci_misc_hi = - (mci_misc_hi & ~(MASK_ERR_COUNT_HI | MASK_OVERFLOW_HI)) | - (THRESHOLD_MAX - b->threshold_limit); - } else if (old_limit) { /* change limit w/o reset */ - int new_count = (mci_misc_hi & THRESHOLD_MAX) + - (old_limit - b->threshold_limit); - mci_misc_hi = (mci_misc_hi & ~MASK_ERR_COUNT_HI) | - (new_count & THRESHOLD_MAX); - } - - b->interrupt_enable ? - (mci_misc_hi = (mci_misc_hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) : - (mci_misc_hi &= ~MASK_INT_TYPE_HI); - - mci_misc_hi |= MASK_COUNT_EN_HI; - wrmsr(b->address, mci_misc_lo, mci_misc_hi); -} - -/* cpu init entry point, called from mce.c with preempt off */ -void __cpuinit mce_amd_feature_init(struct cpuinfo_x86 *c) -{ - unsigned int bank, block; - unsigned int cpu = smp_processor_id(); - u32 low = 0, high = 0, address = 0; - - for (bank = 0; bank < NR_BANKS; ++bank) { - for (block = 0; block < NR_BLOCKS; ++block) { - if (block == 0) - address = MSR_IA32_MC0_MISC + bank * 4; - else if (block == 1) { - address = (low & MASK_BLKPTR_LO) >> 21; - if (!address) - break; - address += MCG_XBLK_ADDR; - } - else - ++address; - - if (rdmsr_safe(address, &low, &high)) - break; - - if (!(high & MASK_VALID_HI)) { - if (block) - continue; - else - break; - } - - if (!(high & MASK_CNTP_HI) || - (high & MASK_LOCKED_HI)) - continue; - - if (!block) - per_cpu(bank_map, cpu) |= (1 << bank); -#ifdef CONFIG_SMP - if (shared_bank[bank] && c->cpu_core_id) - break; -#endif - high &= ~MASK_LVTOFF_HI; - high |= K8_APIC_EXT_LVT_ENTRY_THRESHOLD << 20; - wrmsr(address, low, high); - - setup_APIC_extended_lvt(K8_APIC_EXT_LVT_ENTRY_THRESHOLD, - THRESHOLD_APIC_VECTOR, - K8_APIC_EXT_INT_MSG_FIX, 0); - - threshold_defaults.address = address; - threshold_restart_bank(&threshold_defaults, 0, 0); - } - } -} - -/* - * APIC Interrupt Handler - */ - -/* - * threshold interrupt handler will service THRESHOLD_APIC_VECTOR. - * the interrupt goes off when error_count reaches threshold_limit. - * the handler will simply log mcelog w/ software defined bank number. - */ -asmlinkage void mce_threshold_interrupt(void) -{ - unsigned int bank, block; - struct mce m; - u32 low = 0, high = 0, address = 0; - - ack_APIC_irq(); - exit_idle(); - irq_enter(); - - memset(&m, 0, sizeof(m)); - rdtscll(m.tsc); - m.cpu = smp_processor_id(); - - /* assume first bank caused it */ - for (bank = 0; bank < NR_BANKS; ++bank) { - if (!(per_cpu(bank_map, m.cpu) & (1 << bank))) - continue; - for (block = 0; block < NR_BLOCKS; ++block) { - if (block == 0) - address = MSR_IA32_MC0_MISC + bank * 4; - else if (block == 1) { - address = (low & MASK_BLKPTR_LO) >> 21; - if (!address) - break; - address += MCG_XBLK_ADDR; - } - else - ++address; - - if (rdmsr_safe(address, &low, &high)) - break; - - if (!(high & MASK_VALID_HI)) { - if (block) - continue; - else - break; - } - - if (!(high & MASK_CNTP_HI) || - (high & MASK_LOCKED_HI)) - continue; - - /* Log the machine check that caused the threshold - event. */ - do_machine_check(NULL, 0); - - if (high & MASK_OVERFLOW_HI) { - rdmsrl(address, m.misc); - rdmsrl(MSR_IA32_MC0_STATUS + bank * 4, - m.status); - m.bank = K8_MCE_THRESHOLD_BASE - + bank * NR_BLOCKS - + block; - mce_log(&m); - goto out; - } - } - } -out: - irq_exit(); -} - -/* - * Sysfs Interface - */ - -struct threshold_attr { - struct attribute attr; - ssize_t(*show) (struct threshold_block *, char *); - ssize_t(*store) (struct threshold_block *, const char *, size_t count); -}; - -static cpumask_t affinity_set(unsigned int cpu) -{ - cpumask_t oldmask = current->cpus_allowed; - cpumask_t newmask = CPU_MASK_NONE; - cpu_set(cpu, newmask); - set_cpus_allowed(current, newmask); - return oldmask; -} - -static void affinity_restore(cpumask_t oldmask) -{ - set_cpus_allowed(current, oldmask); -} - -#define SHOW_FIELDS(name) \ -static ssize_t show_ ## name(struct threshold_block * b, char *buf) \ -{ \ - return sprintf(buf, "%lx\n", (unsigned long) b->name); \ -} -SHOW_FIELDS(interrupt_enable) -SHOW_FIELDS(threshold_limit) - -static ssize_t store_interrupt_enable(struct threshold_block *b, - const char *buf, size_t count) -{ - char *end; - cpumask_t oldmask; - unsigned long new = simple_strtoul(buf, &end, 0); - if (end == buf) - return -EINVAL; - b->interrupt_enable = !!new; - - oldmask = affinity_set(b->cpu); - threshold_restart_bank(b, 0, 0); - affinity_restore(oldmask); - - return end - buf; -} - -static ssize_t store_threshold_limit(struct threshold_block *b, - const char *buf, size_t count) -{ - char *end; - cpumask_t oldmask; - u16 old; - unsigned long new = simple_strtoul(buf, &end, 0); - if (end == buf) - return -EINVAL; - if (new > THRESHOLD_MAX) - new = THRESHOLD_MAX; - if (new < 1) - new = 1; - old = b->threshold_limit; - b->threshold_limit = new; - - oldmask = affinity_set(b->cpu); - threshold_restart_bank(b, 0, old); - affinity_restore(oldmask); - - return end - buf; -} - -static ssize_t show_error_count(struct threshold_block *b, char *buf) -{ - u32 high, low; - cpumask_t oldmask; - oldmask = affinity_set(b->cpu); - rdmsr(b->address, low, high); - affinity_restore(oldmask); - return sprintf(buf, "%x\n", - (high & 0xFFF) - (THRESHOLD_MAX - b->threshold_limit)); -} - -static ssize_t store_error_count(struct threshold_block *b, - const char *buf, size_t count) -{ - cpumask_t oldmask; - oldmask = affinity_set(b->cpu); - threshold_restart_bank(b, 1, 0); - affinity_restore(oldmask); - return 1; -} - -#define THRESHOLD_ATTR(_name,_mode,_show,_store) { \ - .attr = {.name = __stringify(_name), .mode = _mode }, \ - .show = _show, \ - .store = _store, \ -}; - -#define RW_ATTR(name) \ -static struct threshold_attr name = \ - THRESHOLD_ATTR(name, 0644, show_## name, store_## name) - -RW_ATTR(interrupt_enable); -RW_ATTR(threshold_limit); -RW_ATTR(error_count); - -static struct attribute *default_attrs[] = { - &interrupt_enable.attr, - &threshold_limit.attr, - &error_count.attr, - NULL -}; - -#define to_block(k) container_of(k, struct threshold_block, kobj) -#define to_attr(a) container_of(a, struct threshold_attr, attr) - -static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) -{ - struct threshold_block *b = to_block(kobj); - struct threshold_attr *a = to_attr(attr); - ssize_t ret; - ret = a->show ? a->show(b, buf) : -EIO; - return ret; -} - -static ssize_t store(struct kobject *kobj, struct attribute *attr, - const char *buf, size_t count) -{ - struct threshold_block *b = to_block(kobj); - struct threshold_attr *a = to_attr(attr); - ssize_t ret; - ret = a->store ? a->store(b, buf, count) : -EIO; - return ret; -} - -static struct sysfs_ops threshold_ops = { - .show = show, - .store = store, -}; - -static struct kobj_type threshold_ktype = { - .sysfs_ops = &threshold_ops, - .default_attrs = default_attrs, -}; - -static __cpuinit int allocate_threshold_blocks(unsigned int cpu, - unsigned int bank, - unsigned int block, - u32 address) -{ - int err; - u32 low, high; - struct threshold_block *b = NULL; - - if ((bank >= NR_BANKS) || (block >= NR_BLOCKS)) - return 0; - - if (rdmsr_safe(address, &low, &high)) - return 0; - - if (!(high & MASK_VALID_HI)) { - if (block) - goto recurse; - else - return 0; - } - - if (!(high & MASK_CNTP_HI) || - (high & MASK_LOCKED_HI)) - goto recurse; - - b = kzalloc(sizeof(struct threshold_block), GFP_KERNEL); - if (!b) - return -ENOMEM; - - b->block = block; - b->bank = bank; - b->cpu = cpu; - b->address = address; - b->interrupt_enable = 0; - b->threshold_limit = THRESHOLD_MAX; - - INIT_LIST_HEAD(&b->miscj); - - if (per_cpu(threshold_banks, cpu)[bank]->blocks) - list_add(&b->miscj, - &per_cpu(threshold_banks, cpu)[bank]->blocks->miscj); - else - per_cpu(threshold_banks, cpu)[bank]->blocks = b; - - kobject_set_name(&b->kobj, "misc%i", block); - b->kobj.parent = &per_cpu(threshold_banks, cpu)[bank]->kobj; - b->kobj.ktype = &threshold_ktype; - err = kobject_register(&b->kobj); - if (err) - goto out_free; -recurse: - if (!block) { - address = (low & MASK_BLKPTR_LO) >> 21; - if (!address) - return 0; - address += MCG_XBLK_ADDR; - } else - ++address; - - err = allocate_threshold_blocks(cpu, bank, ++block, address); - if (err) - goto out_free; - - return err; - -out_free: - if (b) { - kobject_unregister(&b->kobj); - kfree(b); - } - return err; -} - -/* symlinks sibling shared banks to first core. first core owns dir/files. */ -static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) -{ - int i, err = 0; - struct threshold_bank *b = NULL; - cpumask_t oldmask = CPU_MASK_NONE; - char name[32]; - - sprintf(name, "threshold_bank%i", bank); - -#ifdef CONFIG_SMP - if (cpu_data[cpu].cpu_core_id && shared_bank[bank]) { /* symlink */ - i = first_cpu(cpu_core_map[cpu]); - - /* first core not up yet */ - if (cpu_data[i].cpu_core_id) - goto out; - - /* already linked */ - if (per_cpu(threshold_banks, cpu)[bank]) - goto out; - - b = per_cpu(threshold_banks, i)[bank]; - - if (!b) - goto out; - - err = sysfs_create_link(&per_cpu(device_mce, cpu).kobj, - &b->kobj, name); - if (err) - goto out; - - b->cpus = cpu_core_map[cpu]; - per_cpu(threshold_banks, cpu)[bank] = b; - goto out; - } -#endif - - b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL); - if (!b) { - err = -ENOMEM; - goto out; - } - - kobject_set_name(&b->kobj, "threshold_bank%i", bank); - b->kobj.parent = &per_cpu(device_mce, cpu).kobj; -#ifndef CONFIG_SMP - b->cpus = CPU_MASK_ALL; -#else - b->cpus = cpu_core_map[cpu]; -#endif - err = kobject_register(&b->kobj); - if (err) - goto out_free; - - per_cpu(threshold_banks, cpu)[bank] = b; - - oldmask = affinity_set(cpu); - err = allocate_threshold_blocks(cpu, bank, 0, - MSR_IA32_MC0_MISC + bank * 4); - affinity_restore(oldmask); - - if (err) - goto out_free; - - for_each_cpu_mask(i, b->cpus) { - if (i == cpu) - continue; - - err = sysfs_create_link(&per_cpu(device_mce, i).kobj, - &b->kobj, name); - if (err) - goto out; - - per_cpu(threshold_banks, i)[bank] = b; - } - - goto out; - -out_free: - per_cpu(threshold_banks, cpu)[bank] = NULL; - kfree(b); -out: - return err; -} - -/* create dir/files for all valid threshold banks */ -static __cpuinit int threshold_create_device(unsigned int cpu) -{ - unsigned int bank; - int err = 0; - - for (bank = 0; bank < NR_BANKS; ++bank) { - if (!(per_cpu(bank_map, cpu) & 1 << bank)) - continue; - err = threshold_create_bank(cpu, bank); - if (err) - goto out; - } -out: - return err; -} - -/* - * let's be hotplug friendly. - * in case of multiple core processors, the first core always takes ownership - * of shared sysfs dir/files, and rest of the cores will be symlinked to it. - */ - -static void deallocate_threshold_block(unsigned int cpu, - unsigned int bank) -{ - struct threshold_block *pos = NULL; - struct threshold_block *tmp = NULL; - struct threshold_bank *head = per_cpu(threshold_banks, cpu)[bank]; - - if (!head) - return; - - list_for_each_entry_safe(pos, tmp, &head->blocks->miscj, miscj) { - kobject_unregister(&pos->kobj); - list_del(&pos->miscj); - kfree(pos); - } - - kfree(per_cpu(threshold_banks, cpu)[bank]->blocks); - per_cpu(threshold_banks, cpu)[bank]->blocks = NULL; -} - -static void threshold_remove_bank(unsigned int cpu, int bank) -{ - int i = 0; - struct threshold_bank *b; - char name[32]; - - b = per_cpu(threshold_banks, cpu)[bank]; - - if (!b) - return; - - if (!b->blocks) - goto free_out; - - sprintf(name, "threshold_bank%i", bank); - -#ifdef CONFIG_SMP - /* sibling symlink */ - if (shared_bank[bank] && b->blocks->cpu != cpu) { - sysfs_remove_link(&per_cpu(device_mce, cpu).kobj, name); - per_cpu(threshold_banks, cpu)[bank] = NULL; - return; - } -#endif - - /* remove all sibling symlinks before unregistering */ - for_each_cpu_mask(i, b->cpus) { - if (i == cpu) - continue; - - sysfs_remove_link(&per_cpu(device_mce, i).kobj, name); - per_cpu(threshold_banks, i)[bank] = NULL; - } - - deallocate_threshold_block(cpu, bank); - -free_out: - kobject_unregister(&b->kobj); - kfree(b); - per_cpu(threshold_banks, cpu)[bank] = NULL; -} - -static void threshold_remove_device(unsigned int cpu) -{ - unsigned int bank; - - for (bank = 0; bank < NR_BANKS; ++bank) { - if (!(per_cpu(bank_map, cpu) & 1 << bank)) - continue; - threshold_remove_bank(cpu, bank); - } -} - -/* get notified when a cpu comes on/off */ -static int threshold_cpu_callback(struct notifier_block *nfb, - unsigned long action, void *hcpu) -{ - /* cpu was unsigned int to begin with */ - unsigned int cpu = (unsigned long)hcpu; - - if (cpu >= NR_CPUS) - goto out; - - switch (action) { - case CPU_ONLINE: - case CPU_ONLINE_FROZEN: - threshold_create_device(cpu); - break; - case CPU_DEAD: - case CPU_DEAD_FROZEN: - threshold_remove_device(cpu); - break; - default: - break; - } - out: - return NOTIFY_OK; -} - -static struct notifier_block threshold_cpu_notifier = { - .notifier_call = threshold_cpu_callback, -}; - -static __init int threshold_init_device(void) -{ - unsigned lcpu = 0; - - /* to hit CPUs online before the notifier is up */ - for_each_online_cpu(lcpu) { - int err = threshold_create_device(lcpu); - if (err) - return err; - } - register_hotcpu_notifier(&threshold_cpu_notifier); - return 0; -} - -device_initcall(threshold_init_device); diff --git a/arch/x86_64/kernel/mce_intel_64.c b/arch/x86_64/kernel/mce_intel_64.c deleted file mode 100644 index 6551505d8a2..00000000000 --- a/arch/x86_64/kernel/mce_intel_64.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Intel specific MCE features. - * Copyright 2004 Zwane Mwaikambo <zwane@linuxpower.ca> - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/percpu.h> -#include <asm/processor.h> -#include <asm/msr.h> -#include <asm/mce.h> -#include <asm/hw_irq.h> -#include <asm/idle.h> -#include <asm/therm_throt.h> - -asmlinkage void smp_thermal_interrupt(void) -{ - __u64 msr_val; - - ack_APIC_irq(); - - exit_idle(); - irq_enter(); - - rdmsrl(MSR_IA32_THERM_STATUS, msr_val); - if (therm_throt_process(msr_val & 1)) - mce_log_therm_throt_event(smp_processor_id(), msr_val); - - irq_exit(); -} - -static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c) -{ - u32 l, h; - int tm2 = 0; - unsigned int cpu = smp_processor_id(); - - if (!cpu_has(c, X86_FEATURE_ACPI)) - return; - - if (!cpu_has(c, X86_FEATURE_ACC)) - return; - - /* first check if TM1 is already enabled by the BIOS, in which - * case there might be some SMM goo which handles it, so we can't even - * put a handler since it might be delivered via SMI already. - */ - rdmsr(MSR_IA32_MISC_ENABLE, l, h); - h = apic_read(APIC_LVTTHMR); - if ((l & (1 << 3)) && (h & APIC_DM_SMI)) { - printk(KERN_DEBUG - "CPU%d: Thermal monitoring handled by SMI\n", cpu); - return; - } - - if (cpu_has(c, X86_FEATURE_TM2) && (l & (1 << 13))) - tm2 = 1; - - if (h & APIC_VECTOR_MASK) { - printk(KERN_DEBUG - "CPU%d: Thermal LVT vector (%#x) already " - "installed\n", cpu, (h & APIC_VECTOR_MASK)); - return; - } - - h = THERMAL_APIC_VECTOR; - h |= (APIC_DM_FIXED | APIC_LVT_MASKED); - apic_write(APIC_LVTTHMR, h); - - rdmsr(MSR_IA32_THERM_INTERRUPT, l, h); - wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03, h); - - rdmsr(MSR_IA32_MISC_ENABLE, l, h); - wrmsr(MSR_IA32_MISC_ENABLE, l | (1 << 3), h); - - l = apic_read(APIC_LVTTHMR); - apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED); - printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n", - cpu, tm2 ? "TM2" : "TM1"); - - /* enable thermal throttle processing */ - atomic_set(&therm_throt_en, 1); - return; -} - -void __cpuinit mce_intel_feature_init(struct cpuinfo_x86 *c) -{ - intel_init_thermal(c); -} diff --git a/arch/x86_64/kernel/module_64.c b/arch/x86_64/kernel/module_64.c deleted file mode 100644 index a888e67f587..00000000000 --- a/arch/x86_64/kernel/module_64.c +++ /dev/null @@ -1,185 +0,0 @@ -/* Kernel module help for x86-64 - Copyright (C) 2001 Rusty Russell. - Copyright (C) 2002,2003 Andi Kleen, SuSE Labs. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ -#include <linux/moduleloader.h> -#include <linux/elf.h> -#include <linux/vmalloc.h> -#include <linux/fs.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/bug.h> - -#include <asm/system.h> -#include <asm/page.h> -#include <asm/pgtable.h> - -#define DEBUGP(fmt...) - -#ifndef CONFIG_UML -void module_free(struct module *mod, void *module_region) -{ - vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ -} - -void *module_alloc(unsigned long size) -{ - struct vm_struct *area; - - if (!size) - return NULL; - size = PAGE_ALIGN(size); - if (size > MODULES_LEN) - return NULL; - - area = __get_vm_area(size, VM_ALLOC, MODULES_VADDR, MODULES_END); - if (!area) - return NULL; - - return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL_EXEC); -} -#endif - -/* We don't need anything special. */ -int module_frob_arch_sections(Elf_Ehdr *hdr, - Elf_Shdr *sechdrs, - char *secstrings, - struct module *mod) -{ - return 0; -} - -int apply_relocate_add(Elf64_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - unsigned int i; - Elf64_Rela *rel = (void *)sechdrs[relsec].sh_addr; - Elf64_Sym *sym; - void *loc; - u64 val; - - DEBUGP("Applying relocate section %u to %u\n", relsec, - sechdrs[relsec].sh_info); - for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { - /* This is where to make the change */ - loc = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr - + rel[i].r_offset; - - /* This is the symbol it is referring to. Note that all - undefined symbols have been resolved. */ - sym = (Elf64_Sym *)sechdrs[symindex].sh_addr - + ELF64_R_SYM(rel[i].r_info); - - DEBUGP("type %d st_value %Lx r_addend %Lx loc %Lx\n", - (int)ELF64_R_TYPE(rel[i].r_info), - sym->st_value, rel[i].r_addend, (u64)loc); - - val = sym->st_value + rel[i].r_addend; - - switch (ELF64_R_TYPE(rel[i].r_info)) { - case R_X86_64_NONE: - break; - case R_X86_64_64: - *(u64 *)loc = val; - break; - case R_X86_64_32: - *(u32 *)loc = val; - if (val != *(u32 *)loc) - goto overflow; - break; - case R_X86_64_32S: - *(s32 *)loc = val; - if ((s64)val != *(s32 *)loc) - goto overflow; - break; - case R_X86_64_PC32: - val -= (u64)loc; - *(u32 *)loc = val; -#if 0 - if ((s64)val != *(s32 *)loc) - goto overflow; -#endif - break; - default: - printk(KERN_ERR "module %s: Unknown rela relocation: %Lu\n", - me->name, ELF64_R_TYPE(rel[i].r_info)); - return -ENOEXEC; - } - } - return 0; - -overflow: - printk(KERN_ERR "overflow in relocation type %d val %Lx\n", - (int)ELF64_R_TYPE(rel[i].r_info), val); - printk(KERN_ERR "`%s' likely not compiled with -mcmodel=kernel\n", - me->name); - return -ENOEXEC; -} - -int apply_relocate(Elf_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - printk("non add relocation not supported\n"); - return -ENOSYS; -} - -int module_finalize(const Elf_Ehdr *hdr, - const Elf_Shdr *sechdrs, - struct module *me) -{ - const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL; - char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - - for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) { - if (!strcmp(".text", secstrings + s->sh_name)) - text = s; - if (!strcmp(".altinstructions", secstrings + s->sh_name)) - alt = s; - if (!strcmp(".smp_locks", secstrings + s->sh_name)) - locks= s; - } - - if (alt) { - /* patch .altinstructions */ - void *aseg = (void *)alt->sh_addr; - apply_alternatives(aseg, aseg + alt->sh_size); - } - if (locks && text) { - void *lseg = (void *)locks->sh_addr; - void *tseg = (void *)text->sh_addr; - alternatives_smp_module_add(me, me->name, - lseg, lseg + locks->sh_size, - tseg, tseg + text->sh_size); - } - - return module_bug_finalize(hdr, sechdrs, me); -} - -void module_arch_cleanup(struct module *mod) -{ - alternatives_smp_module_del(mod); - module_bug_cleanup(mod); -} diff --git a/arch/x86_64/kernel/mpparse_64.c b/arch/x86_64/kernel/mpparse_64.c deleted file mode 100644 index 8bf0ca03ac8..00000000000 --- a/arch/x86_64/kernel/mpparse_64.c +++ /dev/null @@ -1,852 +0,0 @@ -/* - * Intel Multiprocessor Specification 1.1 and 1.4 - * compliant MP-table parsing routines. - * - * (c) 1995 Alan Cox, Building #3 <alan@redhat.com> - * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com> - * - * Fixes - * Erich Boleyn : MP v1.4 and additional changes. - * Alan Cox : Added EBDA scanning - * Ingo Molnar : various cleanups and rewrites - * Maciej W. Rozycki: Bits for default MP configurations - * Paul Diefenbaugh: Added full ACPI support - */ - -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/bootmem.h> -#include <linux/kernel_stat.h> -#include <linux/mc146818rtc.h> -#include <linux/acpi.h> -#include <linux/module.h> - -#include <asm/smp.h> -#include <asm/mtrr.h> -#include <asm/mpspec.h> -#include <asm/pgalloc.h> -#include <asm/io_apic.h> -#include <asm/proto.h> -#include <asm/acpi.h> - -/* Have we found an MP table */ -int smp_found_config; - -/* - * Various Linux-internal data structures created from the - * MP-table. - */ -DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); -int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 }; - -static int mp_current_pci_id = 0; -/* I/O APIC entries */ -struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; - -/* # of MP IRQ source entries */ -struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; - -/* MP IRQ source entries */ -int mp_irq_entries; - -int nr_ioapics; -unsigned long mp_lapic_addr = 0; - - - -/* Processor that is doing the boot up */ -unsigned int boot_cpu_id = -1U; -/* Internal processor count */ -unsigned int num_processors __cpuinitdata = 0; - -unsigned disabled_cpus __cpuinitdata; - -/* Bitmask of physically existing CPUs */ -physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE; - -u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID }; - - -/* - * Intel MP BIOS table parsing routines: - */ - -/* - * Checksum an MP configuration block. - */ - -static int __init mpf_checksum(unsigned char *mp, int len) -{ - int sum = 0; - - while (len--) - sum += *mp++; - - return sum & 0xFF; -} - -static void __cpuinit MP_processor_info (struct mpc_config_processor *m) -{ - int cpu; - cpumask_t tmp_map; - char *bootup_cpu = ""; - - if (!(m->mpc_cpuflag & CPU_ENABLED)) { - disabled_cpus++; - return; - } - if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { - bootup_cpu = " (Bootup-CPU)"; - boot_cpu_id = m->mpc_apicid; - } - - printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu); - - if (num_processors >= NR_CPUS) { - printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." - " Processor ignored.\n", NR_CPUS); - return; - } - - num_processors++; - cpus_complement(tmp_map, cpu_present_map); - cpu = first_cpu(tmp_map); - - physid_set(m->mpc_apicid, phys_cpu_present_map); - if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { - /* - * bios_cpu_apicid is required to have processors listed - * in same order as logical cpu numbers. Hence the first - * entry is BSP, and so on. - */ - cpu = 0; - } - bios_cpu_apicid[cpu] = m->mpc_apicid; - x86_cpu_to_apicid[cpu] = m->mpc_apicid; - - cpu_set(cpu, cpu_possible_map); - cpu_set(cpu, cpu_present_map); -} - -static void __init MP_bus_info (struct mpc_config_bus *m) -{ - char str[7]; - - memcpy(str, m->mpc_bustype, 6); - str[6] = 0; - Dprintk("Bus #%d is %s\n", m->mpc_busid, str); - - if (strncmp(str, "ISA", 3) == 0) { - set_bit(m->mpc_busid, mp_bus_not_pci); - } else if (strncmp(str, "PCI", 3) == 0) { - clear_bit(m->mpc_busid, mp_bus_not_pci); - mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id; - mp_current_pci_id++; - } else { - printk(KERN_ERR "Unknown bustype %s\n", str); - } -} - -static int bad_ioapic(unsigned long address) -{ - if (nr_ioapics >= MAX_IO_APICS) { - printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " - "(found %d)\n", MAX_IO_APICS, nr_ioapics); - panic("Recompile kernel with bigger MAX_IO_APICS!\n"); - } - if (!address) { - printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" - " found in table, skipping!\n"); - return 1; - } - return 0; -} - -static void __init MP_ioapic_info (struct mpc_config_ioapic *m) -{ - if (!(m->mpc_flags & MPC_APIC_USABLE)) - return; - - printk("I/O APIC #%d at 0x%X.\n", - m->mpc_apicid, m->mpc_apicaddr); - - if (bad_ioapic(m->mpc_apicaddr)) - return; - - mp_ioapics[nr_ioapics] = *m; - nr_ioapics++; -} - -static void __init MP_intsrc_info (struct mpc_config_intsrc *m) -{ - mp_irqs [mp_irq_entries] = *m; - Dprintk("Int: type %d, pol %d, trig %d, bus %d," - " IRQ %02x, APIC ID %x, APIC INT %02x\n", - m->mpc_irqtype, m->mpc_irqflag & 3, - (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, - m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); - if (++mp_irq_entries >= MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!!\n"); -} - -static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m) -{ - Dprintk("Lint: type %d, pol %d, trig %d, bus %d," - " IRQ %02x, APIC ID %x, APIC LINT %02x\n", - m->mpc_irqtype, m->mpc_irqflag & 3, - (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid, - m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint); -} - -/* - * Read/parse the MPC - */ - -static int __init smp_read_mpc(struct mp_config_table *mpc) -{ - char str[16]; - int count=sizeof(*mpc); - unsigned char *mpt=((unsigned char *)mpc)+count; - - if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) { - printk("MPTABLE: bad signature [%c%c%c%c]!\n", - mpc->mpc_signature[0], - mpc->mpc_signature[1], - mpc->mpc_signature[2], - mpc->mpc_signature[3]); - return 0; - } - if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) { - printk("MPTABLE: checksum error!\n"); - return 0; - } - if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) { - printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n", - mpc->mpc_spec); - return 0; - } - if (!mpc->mpc_lapic) { - printk(KERN_ERR "MPTABLE: null local APIC address!\n"); - return 0; - } - memcpy(str,mpc->mpc_oem,8); - str[8] = 0; - printk(KERN_INFO "MPTABLE: OEM ID: %s ",str); - - memcpy(str,mpc->mpc_productid,12); - str[12] = 0; - printk("MPTABLE: Product ID: %s ",str); - - printk("MPTABLE: APIC at: 0x%X\n",mpc->mpc_lapic); - - /* save the local APIC address, it might be non-default */ - if (!acpi_lapic) - mp_lapic_addr = mpc->mpc_lapic; - - /* - * Now process the configuration blocks. - */ - while (count < mpc->mpc_length) { - switch(*mpt) { - case MP_PROCESSOR: - { - struct mpc_config_processor *m= - (struct mpc_config_processor *)mpt; - if (!acpi_lapic) - MP_processor_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - case MP_BUS: - { - struct mpc_config_bus *m= - (struct mpc_config_bus *)mpt; - MP_bus_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - case MP_IOAPIC: - { - struct mpc_config_ioapic *m= - (struct mpc_config_ioapic *)mpt; - MP_ioapic_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - case MP_INTSRC: - { - struct mpc_config_intsrc *m= - (struct mpc_config_intsrc *)mpt; - - MP_intsrc_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - case MP_LINTSRC: - { - struct mpc_config_lintsrc *m= - (struct mpc_config_lintsrc *)mpt; - MP_lintsrc_info(m); - mpt += sizeof(*m); - count += sizeof(*m); - break; - } - } - } - setup_apic_routing(); - if (!num_processors) - printk(KERN_ERR "MPTABLE: no processors registered!\n"); - return num_processors; -} - -static int __init ELCR_trigger(unsigned int irq) -{ - unsigned int port; - - port = 0x4d0 + (irq >> 3); - return (inb(port) >> (irq & 7)) & 1; -} - -static void __init construct_default_ioirq_mptable(int mpc_default_type) -{ - struct mpc_config_intsrc intsrc; - int i; - int ELCR_fallback = 0; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqflag = 0; /* conforming */ - intsrc.mpc_srcbus = 0; - intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid; - - intsrc.mpc_irqtype = mp_INT; - - /* - * If true, we have an ISA/PCI system with no IRQ entries - * in the MP table. To prevent the PCI interrupts from being set up - * incorrectly, we try to use the ELCR. The sanity check to see if - * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can - * never be level sensitive, so we simply see if the ELCR agrees. - * If it does, we assume it's valid. - */ - if (mpc_default_type == 5) { - printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n"); - - if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13)) - printk(KERN_ERR "ELCR contains invalid data... not using ELCR\n"); - else { - printk(KERN_INFO "Using ELCR to identify PCI interrupts\n"); - ELCR_fallback = 1; - } - } - - for (i = 0; i < 16; i++) { - switch (mpc_default_type) { - case 2: - if (i == 0 || i == 13) - continue; /* IRQ0 & IRQ13 not connected */ - /* fall through */ - default: - if (i == 2) - continue; /* IRQ2 is never connected */ - } - - if (ELCR_fallback) { - /* - * If the ELCR indicates a level-sensitive interrupt, we - * copy that information over to the MP table in the - * irqflag field (level sensitive, active high polarity). - */ - if (ELCR_trigger(i)) - intsrc.mpc_irqflag = 13; - else - intsrc.mpc_irqflag = 0; - } - - intsrc.mpc_srcbusirq = i; - intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */ - MP_intsrc_info(&intsrc); - } - - intsrc.mpc_irqtype = mp_ExtINT; - intsrc.mpc_srcbusirq = 0; - intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */ - MP_intsrc_info(&intsrc); -} - -static inline void __init construct_default_ISA_mptable(int mpc_default_type) -{ - struct mpc_config_processor processor; - struct mpc_config_bus bus; - struct mpc_config_ioapic ioapic; - struct mpc_config_lintsrc lintsrc; - int linttypes[2] = { mp_ExtINT, mp_NMI }; - int i; - - /* - * local APIC has default address - */ - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - - /* - * 2 CPUs, numbered 0 & 1. - */ - processor.mpc_type = MP_PROCESSOR; - processor.mpc_apicver = 0; - processor.mpc_cpuflag = CPU_ENABLED; - processor.mpc_cpufeature = 0; - processor.mpc_featureflag = 0; - processor.mpc_reserved[0] = 0; - processor.mpc_reserved[1] = 0; - for (i = 0; i < 2; i++) { - processor.mpc_apicid = i; - MP_processor_info(&processor); - } - - bus.mpc_type = MP_BUS; - bus.mpc_busid = 0; - switch (mpc_default_type) { - default: - printk(KERN_ERR "???\nUnknown standard configuration %d\n", - mpc_default_type); - /* fall through */ - case 1: - case 5: - memcpy(bus.mpc_bustype, "ISA ", 6); - break; - } - MP_bus_info(&bus); - if (mpc_default_type > 4) { - bus.mpc_busid = 1; - memcpy(bus.mpc_bustype, "PCI ", 6); - MP_bus_info(&bus); - } - - ioapic.mpc_type = MP_IOAPIC; - ioapic.mpc_apicid = 2; - ioapic.mpc_apicver = 0; - ioapic.mpc_flags = MPC_APIC_USABLE; - ioapic.mpc_apicaddr = 0xFEC00000; - MP_ioapic_info(&ioapic); - - /* - * We set up most of the low 16 IO-APIC pins according to MPS rules. - */ - construct_default_ioirq_mptable(mpc_default_type); - - lintsrc.mpc_type = MP_LINTSRC; - lintsrc.mpc_irqflag = 0; /* conforming */ - lintsrc.mpc_srcbusid = 0; - lintsrc.mpc_srcbusirq = 0; - lintsrc.mpc_destapic = MP_APIC_ALL; - for (i = 0; i < 2; i++) { - lintsrc.mpc_irqtype = linttypes[i]; - lintsrc.mpc_destapiclint = i; - MP_lintsrc_info(&lintsrc); - } -} - -static struct intel_mp_floating *mpf_found; - -/* - * Scan the memory blocks for an SMP configuration block. - */ -void __init get_smp_config (void) -{ - struct intel_mp_floating *mpf = mpf_found; - - /* - * ACPI supports both logical (e.g. Hyper-Threading) and physical - * processors, where MPS only supports physical. - */ - if (acpi_lapic && acpi_ioapic) { - printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n"); - return; - } - else if (acpi_lapic) - printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n"); - - printk("Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); - - /* - * Now see if we need to read further. - */ - if (mpf->mpf_feature1 != 0) { - - printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1); - construct_default_ISA_mptable(mpf->mpf_feature1); - - } else if (mpf->mpf_physptr) { - - /* - * Read the physical hardware table. Anything here will - * override the defaults. - */ - if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) { - smp_found_config = 0; - printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); - printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n"); - return; - } - /* - * If there are no explicit MP IRQ entries, then we are - * broken. We set up most of the low 16 IO-APIC pins to - * ISA defaults and hope it will work. - */ - if (!mp_irq_entries) { - struct mpc_config_bus bus; - - printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n"); - - bus.mpc_type = MP_BUS; - bus.mpc_busid = 0; - memcpy(bus.mpc_bustype, "ISA ", 6); - MP_bus_info(&bus); - - construct_default_ioirq_mptable(0); - } - - } else - BUG(); - - printk(KERN_INFO "Processors: %d\n", num_processors); - /* - * Only use the first configuration found. - */ -} - -static int __init smp_scan_config (unsigned long base, unsigned long length) -{ - extern void __bad_mpf_size(void); - unsigned int *bp = phys_to_virt(base); - struct intel_mp_floating *mpf; - - Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length); - if (sizeof(*mpf) != 16) - __bad_mpf_size(); - - while (length > 0) { - mpf = (struct intel_mp_floating *)bp; - if ((*bp == SMP_MAGIC_IDENT) && - (mpf->mpf_length == 1) && - !mpf_checksum((unsigned char *)bp, 16) && - ((mpf->mpf_specification == 1) - || (mpf->mpf_specification == 4)) ) { - - smp_found_config = 1; - reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE); - if (mpf->mpf_physptr) - reserve_bootmem_generic(mpf->mpf_physptr, PAGE_SIZE); - mpf_found = mpf; - return 1; - } - bp += 4; - length -= 16; - } - return 0; -} - -void __init find_smp_config(void) -{ - unsigned int address; - - /* - * FIXME: Linux assumes you have 640K of base ram.. - * this continues the error... - * - * 1) Scan the bottom 1K for a signature - * 2) Scan the top 1K of base RAM - * 3) Scan the 64K of bios - */ - if (smp_scan_config(0x0,0x400) || - smp_scan_config(639*0x400,0x400) || - smp_scan_config(0xF0000,0x10000)) - return; - /* - * If it is an SMP machine we should know now. - * - * there is a real-mode segmented pointer pointing to the - * 4K EBDA area at 0x40E, calculate and scan it here. - * - * NOTE! There are Linux loaders that will corrupt the EBDA - * area, and as such this kind of SMP config may be less - * trustworthy, simply because the SMP table may have been - * stomped on during early boot. These loaders are buggy and - * should be fixed. - */ - - address = *(unsigned short *)phys_to_virt(0x40E); - address <<= 4; - if (smp_scan_config(address, 0x1000)) - return; - - /* If we have come this far, we did not find an MP table */ - printk(KERN_INFO "No mptable found.\n"); -} - -/* -------------------------------------------------------------------------- - ACPI-based MP Configuration - -------------------------------------------------------------------------- */ - -#ifdef CONFIG_ACPI - -void __init mp_register_lapic_address(u64 address) -{ - mp_lapic_addr = (unsigned long) address; - set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); - if (boot_cpu_id == -1U) - boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID)); -} - -void __cpuinit mp_register_lapic (u8 id, u8 enabled) -{ - struct mpc_config_processor processor; - int boot_cpu = 0; - - if (id == boot_cpu_id) - boot_cpu = 1; - - processor.mpc_type = MP_PROCESSOR; - processor.mpc_apicid = id; - processor.mpc_apicver = 0; - processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0); - processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0); - processor.mpc_cpufeature = 0; - processor.mpc_featureflag = 0; - processor.mpc_reserved[0] = 0; - processor.mpc_reserved[1] = 0; - - MP_processor_info(&processor); -} - -#define MP_ISA_BUS 0 -#define MP_MAX_IOAPIC_PIN 127 - -static struct mp_ioapic_routing { - int apic_id; - int gsi_start; - int gsi_end; - u32 pin_programmed[4]; -} mp_ioapic_routing[MAX_IO_APICS]; - -static int mp_find_ioapic(int gsi) -{ - int i = 0; - - /* Find the IOAPIC that manages this GSI. */ - for (i = 0; i < nr_ioapics; i++) { - if ((gsi >= mp_ioapic_routing[i].gsi_start) - && (gsi <= mp_ioapic_routing[i].gsi_end)) - return i; - } - - printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); - return -1; -} - -static u8 uniq_ioapic_id(u8 id) -{ - int i; - DECLARE_BITMAP(used, 256); - bitmap_zero(used, 256); - for (i = 0; i < nr_ioapics; i++) { - struct mpc_config_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->mpc_apicid, used); - } - if (!test_bit(id, used)) - return id; - return find_first_zero_bit(used, 256); -} - -void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base) -{ - int idx = 0; - - if (bad_ioapic(address)) - return; - - idx = nr_ioapics; - - mp_ioapics[idx].mpc_type = MP_IOAPIC; - mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; - mp_ioapics[idx].mpc_apicaddr = address; - - set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); - mp_ioapics[idx].mpc_apicver = 0; - - /* - * Build basic IRQ lookup table to facilitate gsi->io_apic lookups - * and to prevent reprogramming of IOAPIC pins (PCI IRQs). - */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; - mp_ioapic_routing[idx].gsi_start = gsi_base; - mp_ioapic_routing[idx].gsi_end = gsi_base + - io_apic_get_redir_entries(idx); - - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, address 0x%x, " - "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, - mp_ioapics[idx].mpc_apicaddr, - mp_ioapic_routing[idx].gsi_start, - mp_ioapic_routing[idx].gsi_end); - - nr_ioapics++; -} - -void __init -mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) -{ - struct mpc_config_intsrc intsrc; - int ioapic = -1; - int pin = -1; - - /* - * Convert 'gsi' to 'ioapic.pin'. - */ - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) - return; - pin = gsi - mp_ioapic_routing[ioapic].gsi_start; - - /* - * TBD: This check is for faulty timer entries, where the override - * erroneously sets the trigger to level, resulting in a HUGE - * increase of timer interrupts! - */ - if ((bus_irq == 0) && (trigger == 3)) - trigger = 1; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_irqflag = (trigger << 2) | polarity; - intsrc.mpc_srcbus = MP_ISA_BUS; - intsrc.mpc_srcbusirq = bus_irq; /* IRQ */ - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ - intsrc.mpc_dstirq = pin; /* INTIN# */ - - Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n", - intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, - (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, - intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq); - - mp_irqs[mp_irq_entries] = intsrc; - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!\n"); -} - -void __init mp_config_acpi_legacy_irqs(void) -{ - struct mpc_config_intsrc intsrc; - int i = 0; - int ioapic = -1; - - /* - * Fabricate the legacy ISA bus (bus #31). - */ - set_bit(MP_ISA_BUS, mp_bus_not_pci); - - /* - * Locate the IOAPIC that manages the ISA IRQs (0-15). - */ - ioapic = mp_find_ioapic(0); - if (ioapic < 0) - return; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqflag = 0; /* Conforming */ - intsrc.mpc_srcbus = MP_ISA_BUS; - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; - - /* - * Use the default configuration for the IRQs 0-15. Unless - * overridden by (MADT) interrupt source override entries. - */ - for (i = 0; i < 16; i++) { - int idx; - - for (idx = 0; idx < mp_irq_entries; idx++) { - struct mpc_config_intsrc *irq = mp_irqs + idx; - - /* Do we already have a mapping for this ISA IRQ? */ - if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i) - break; - - /* Do we already have a mapping for this IOAPIC pin */ - if ((irq->mpc_dstapic == intsrc.mpc_dstapic) && - (irq->mpc_dstirq == i)) - break; - } - - if (idx != mp_irq_entries) { - printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); - continue; /* IRQ already used */ - } - - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_srcbusirq = i; /* Identity mapped */ - intsrc.mpc_dstirq = i; - - Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, " - "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, - (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, - intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, - intsrc.mpc_dstirq); - - mp_irqs[mp_irq_entries] = intsrc; - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!\n"); - } -} - -int mp_register_gsi(u32 gsi, int triggering, int polarity) -{ - int ioapic = -1; - int ioapic_pin = 0; - int idx, bit = 0; - - if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) - return gsi; - - /* Don't set up the ACPI SCI because it's already set up */ - if (acpi_gbl_FADT.sci_interrupt == gsi) - return gsi; - - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) { - printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); - return gsi; - } - - ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_start; - - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ - bit = ioapic_pin % 32; - idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32); - if (idx > 3) { - printk(KERN_ERR "Invalid reference to IOAPIC pin " - "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, - ioapic_pin); - return gsi; - } - if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) { - Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", - mp_ioapic_routing[ioapic].apic_id, ioapic_pin); - return gsi; - } - - mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit); - - io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, - triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, - polarity == ACPI_ACTIVE_HIGH ? 0 : 1); - return gsi; -} -#endif /*CONFIG_ACPI*/ diff --git a/arch/x86_64/kernel/nmi_64.c b/arch/x86_64/kernel/nmi_64.c deleted file mode 100644 index 0ec6d2ddb93..00000000000 --- a/arch/x86_64/kernel/nmi_64.c +++ /dev/null @@ -1,483 +0,0 @@ -/* - * linux/arch/x86_64/nmi.c - * - * NMI watchdog support on APIC systems - * - * Started by Ingo Molnar <mingo@redhat.com> - * - * Fixes: - * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. - * Mikael Pettersson : Power Management for local APIC NMI watchdog. - * Pavel Machek and - * Mikael Pettersson : PM converted to driver model. Disable/enable API. - */ - -#include <linux/nmi.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/sysdev.h> -#include <linux/sysctl.h> -#include <linux/kprobes.h> -#include <linux/cpumask.h> -#include <linux/kdebug.h> - -#include <asm/smp.h> -#include <asm/nmi.h> -#include <asm/proto.h> -#include <asm/mce.h> - -int unknown_nmi_panic; -int nmi_watchdog_enabled; -int panic_on_unrecovered_nmi; - -static cpumask_t backtrace_mask = CPU_MASK_NONE; - -/* nmi_active: - * >0: the lapic NMI watchdog is active, but can be disabled - * <0: the lapic NMI watchdog has not been set up, and cannot - * be enabled - * 0: the lapic NMI watchdog is disabled, but can be enabled - */ -atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ -int panic_on_timeout; - -unsigned int nmi_watchdog = NMI_DEFAULT; -static unsigned int nmi_hz = HZ; - -static DEFINE_PER_CPU(short, wd_enabled); - -/* local prototypes */ -static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu); - -/* Run after command line and cpu_init init, but before all other checks */ -void nmi_watchdog_default(void) -{ - if (nmi_watchdog != NMI_DEFAULT) - return; - nmi_watchdog = NMI_NONE; -} - -static int endflag __initdata = 0; - -#ifdef CONFIG_SMP -/* The performance counters used by NMI_LOCAL_APIC don't trigger when - * the CPU is idle. To make sure the NMI watchdog really ticks on all - * CPUs during the test make them busy. - */ -static __init void nmi_cpu_busy(void *data) -{ - local_irq_enable_in_hardirq(); - /* Intentionally don't use cpu_relax here. This is - to make sure that the performance counter really ticks, - even if there is a simulator or similar that catches the - pause instruction. On a real HT machine this is fine because - all other CPUs are busy with "useless" delay loops and don't - care if they get somewhat less cycles. */ - while (endflag == 0) - mb(); -} -#endif - -int __init check_nmi_watchdog (void) -{ - int *counts; - int cpu; - - if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) - return 0; - - if (!atomic_read(&nmi_active)) - return 0; - - counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); - if (!counts) - return -1; - - printk(KERN_INFO "testing NMI watchdog ... "); - -#ifdef CONFIG_SMP - if (nmi_watchdog == NMI_LOCAL_APIC) - smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); -#endif - - for (cpu = 0; cpu < NR_CPUS; cpu++) - counts[cpu] = cpu_pda(cpu)->__nmi_count; - local_irq_enable(); - mdelay((20*1000)/nmi_hz); // wait 20 ticks - - for_each_online_cpu(cpu) { - if (!per_cpu(wd_enabled, cpu)) - continue; - if (cpu_pda(cpu)->__nmi_count - counts[cpu] <= 5) { - printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n", - cpu, - counts[cpu], - cpu_pda(cpu)->__nmi_count); - per_cpu(wd_enabled, cpu) = 0; - atomic_dec(&nmi_active); - } - } - if (!atomic_read(&nmi_active)) { - kfree(counts); - atomic_set(&nmi_active, -1); - endflag = 1; - return -1; - } - endflag = 1; - printk("OK.\n"); - - /* now that we know it works we can reduce NMI frequency to - something more reasonable; makes a difference in some configs */ - if (nmi_watchdog == NMI_LOCAL_APIC) - nmi_hz = lapic_adjust_nmi_hz(1); - - kfree(counts); - return 0; -} - -int __init setup_nmi_watchdog(char *str) -{ - int nmi; - - if (!strncmp(str,"panic",5)) { - panic_on_timeout = 1; - str = strchr(str, ','); - if (!str) - return 1; - ++str; - } - - get_option(&str, &nmi); - - if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) - return 0; - - nmi_watchdog = nmi; - return 1; -} - -__setup("nmi_watchdog=", setup_nmi_watchdog); - - -static void __acpi_nmi_disable(void *__unused) -{ - apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); -} - -/* - * Disable timer based NMIs on all CPUs: - */ -void acpi_nmi_disable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); -} - -static void __acpi_nmi_enable(void *__unused) -{ - apic_write(APIC_LVT0, APIC_DM_NMI); -} - -/* - * Enable timer based NMIs on all CPUs: - */ -void acpi_nmi_enable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); -} -#ifdef CONFIG_PM - -static int nmi_pm_active; /* nmi_active before suspend */ - -static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) -{ - /* only CPU0 goes here, other CPUs should be offline */ - nmi_pm_active = atomic_read(&nmi_active); - stop_apic_nmi_watchdog(NULL); - BUG_ON(atomic_read(&nmi_active) != 0); - return 0; -} - -static int lapic_nmi_resume(struct sys_device *dev) -{ - /* only CPU0 goes here, other CPUs should be offline */ - if (nmi_pm_active > 0) { - setup_apic_nmi_watchdog(NULL); - touch_nmi_watchdog(); - } - return 0; -} - -static struct sysdev_class nmi_sysclass = { - set_kset_name("lapic_nmi"), - .resume = lapic_nmi_resume, - .suspend = lapic_nmi_suspend, -}; - -static struct sys_device device_lapic_nmi = { - .id = 0, - .cls = &nmi_sysclass, -}; - -static int __init init_lapic_nmi_sysfs(void) -{ - int error; - - /* should really be a BUG_ON but b/c this is an - * init call, it just doesn't work. -dcz - */ - if (nmi_watchdog != NMI_LOCAL_APIC) - return 0; - - if ( atomic_read(&nmi_active) < 0 ) - return 0; - - error = sysdev_class_register(&nmi_sysclass); - if (!error) - error = sysdev_register(&device_lapic_nmi); - return error; -} -/* must come after the local APIC's device_initcall() */ -late_initcall(init_lapic_nmi_sysfs); - -#endif /* CONFIG_PM */ - -void setup_apic_nmi_watchdog(void *unused) -{ - if (__get_cpu_var(wd_enabled) == 1) - return; - - /* cheap hack to support suspend/resume */ - /* if cpu0 is not active neither should the other cpus */ - if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0)) - return; - - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - __get_cpu_var(wd_enabled) = 1; - if (lapic_watchdog_init(nmi_hz) < 0) { - __get_cpu_var(wd_enabled) = 0; - return; - } - /* FALL THROUGH */ - case NMI_IO_APIC: - __get_cpu_var(wd_enabled) = 1; - atomic_inc(&nmi_active); - } -} - -void stop_apic_nmi_watchdog(void *unused) -{ - /* only support LOCAL and IO APICs for now */ - if ((nmi_watchdog != NMI_LOCAL_APIC) && - (nmi_watchdog != NMI_IO_APIC)) - return; - if (__get_cpu_var(wd_enabled) == 0) - return; - if (nmi_watchdog == NMI_LOCAL_APIC) - lapic_watchdog_stop(); - __get_cpu_var(wd_enabled) = 0; - atomic_dec(&nmi_active); -} - -/* - * the best way to detect whether a CPU has a 'hard lockup' problem - * is to check it's local APIC timer IRQ counts. If they are not - * changing then that CPU has some problem. - * - * as these watchdog NMI IRQs are generated on every CPU, we only - * have to check the current processor. - */ - -static DEFINE_PER_CPU(unsigned, last_irq_sum); -static DEFINE_PER_CPU(local_t, alert_counter); -static DEFINE_PER_CPU(int, nmi_touch); - -void touch_nmi_watchdog(void) -{ - if (nmi_watchdog > 0) { - unsigned cpu; - - /* - * Tell other CPUs to reset their alert counters. We cannot - * do it ourselves because the alert count increase is not - * atomic. - */ - for_each_present_cpu(cpu) { - if (per_cpu(nmi_touch, cpu) != 1) - per_cpu(nmi_touch, cpu) = 1; - } - } - - touch_softlockup_watchdog(); -} - -int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) -{ - int sum; - int touched = 0; - int cpu = smp_processor_id(); - int rc = 0; - - /* check for other users first */ - if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) - == NOTIFY_STOP) { - rc = 1; - touched = 1; - } - - sum = read_pda(apic_timer_irqs); - if (__get_cpu_var(nmi_touch)) { - __get_cpu_var(nmi_touch) = 0; - touched = 1; - } - - if (cpu_isset(cpu, backtrace_mask)) { - static DEFINE_SPINLOCK(lock); /* Serialise the printks */ - - spin_lock(&lock); - printk("NMI backtrace for cpu %d\n", cpu); - dump_stack(); - spin_unlock(&lock); - cpu_clear(cpu, backtrace_mask); - } - -#ifdef CONFIG_X86_MCE - /* Could check oops_in_progress here too, but it's safer - not too */ - if (atomic_read(&mce_entry) > 0) - touched = 1; -#endif - /* if the apic timer isn't firing, this cpu isn't doing much */ - if (!touched && __get_cpu_var(last_irq_sum) == sum) { - /* - * Ayiee, looks like this CPU is stuck ... - * wait a few IRQs (5 seconds) before doing the oops ... - */ - local_inc(&__get_cpu_var(alert_counter)); - if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) - die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs, - panic_on_timeout); - } else { - __get_cpu_var(last_irq_sum) = sum; - local_set(&__get_cpu_var(alert_counter), 0); - } - - /* see if the nmi watchdog went off */ - if (!__get_cpu_var(wd_enabled)) - return rc; - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - rc |= lapic_wd_event(nmi_hz); - break; - case NMI_IO_APIC: - /* don't know how to accurately check for this. - * just assume it was a watchdog timer interrupt - * This matches the old behaviour. - */ - rc = 1; - break; - } - return rc; -} - -static unsigned ignore_nmis; - -asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code) -{ - nmi_enter(); - add_pda(__nmi_count,1); - if (!ignore_nmis) - default_do_nmi(regs); - nmi_exit(); -} - -int do_nmi_callback(struct pt_regs * regs, int cpu) -{ -#ifdef CONFIG_SYSCTL - if (unknown_nmi_panic) - return unknown_nmi_panic_callback(regs, cpu); -#endif - return 0; -} - -void stop_nmi(void) -{ - acpi_nmi_disable(); - ignore_nmis++; -} - -void restart_nmi(void) -{ - ignore_nmis--; - acpi_nmi_enable(); -} - -#ifdef CONFIG_SYSCTL - -static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) -{ - unsigned char reason = get_nmi_reason(); - char buf[64]; - - sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(buf, regs, 1); /* Always panic here */ - return 0; -} - -/* - * proc handler for /proc/sys/kernel/nmi - */ -int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, - void __user *buffer, size_t *length, loff_t *ppos) -{ - int old_state; - - nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; - old_state = nmi_watchdog_enabled; - proc_dointvec(table, write, file, buffer, length, ppos); - if (!!old_state == !!nmi_watchdog_enabled) - return 0; - - if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) { - printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); - return -EIO; - } - - /* if nmi_watchdog is not set yet, then set it */ - nmi_watchdog_default(); - - if (nmi_watchdog == NMI_LOCAL_APIC) { - if (nmi_watchdog_enabled) - enable_lapic_nmi_watchdog(); - else - disable_lapic_nmi_watchdog(); - } else { - printk( KERN_WARNING - "NMI watchdog doesn't know what hardware to touch\n"); - return -EIO; - } - return 0; -} - -#endif - -void __trigger_all_cpu_backtrace(void) -{ - int i; - - backtrace_mask = cpu_online_map; - /* Wait for up to 10 seconds for all CPUs to do the backtrace */ - for (i = 0; i < 10 * 1000; i++) { - if (cpus_empty(backtrace_mask)) - break; - mdelay(1); - } -} - -EXPORT_SYMBOL(nmi_active); -EXPORT_SYMBOL(nmi_watchdog); -EXPORT_SYMBOL(touch_nmi_watchdog); diff --git a/arch/x86_64/kernel/pci-calgary_64.c b/arch/x86_64/kernel/pci-calgary_64.c deleted file mode 100644 index 71da01e73f0..00000000000 --- a/arch/x86_64/kernel/pci-calgary_64.c +++ /dev/null @@ -1,1578 +0,0 @@ -/* - * Derived from arch/powerpc/kernel/iommu.c - * - * Copyright IBM Corporation, 2006-2007 - * Copyright (C) 2006 Jon Mason <jdmason@kudzu.us> - * - * Author: Jon Mason <jdmason@kudzu.us> - * Author: Muli Ben-Yehuda <muli@il.ibm.com> - - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/spinlock.h> -#include <linux/string.h> -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/bitops.h> -#include <linux/pci_ids.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <asm/iommu.h> -#include <asm/calgary.h> -#include <asm/tce.h> -#include <asm/pci-direct.h> -#include <asm/system.h> -#include <asm/dma.h> -#include <asm/rio.h> - -#ifdef CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT -int use_calgary __read_mostly = 1; -#else -int use_calgary __read_mostly = 0; -#endif /* CONFIG_CALGARY_DEFAULT_ENABLED */ - -#define PCI_DEVICE_ID_IBM_CALGARY 0x02a1 -#define PCI_DEVICE_ID_IBM_CALIOC2 0x0308 - -/* register offsets inside the host bridge space */ -#define CALGARY_CONFIG_REG 0x0108 -#define PHB_CSR_OFFSET 0x0110 /* Channel Status */ -#define PHB_PLSSR_OFFSET 0x0120 -#define PHB_CONFIG_RW_OFFSET 0x0160 -#define PHB_IOBASE_BAR_LOW 0x0170 -#define PHB_IOBASE_BAR_HIGH 0x0180 -#define PHB_MEM_1_LOW 0x0190 -#define PHB_MEM_1_HIGH 0x01A0 -#define PHB_IO_ADDR_SIZE 0x01B0 -#define PHB_MEM_1_SIZE 0x01C0 -#define PHB_MEM_ST_OFFSET 0x01D0 -#define PHB_AER_OFFSET 0x0200 -#define PHB_CONFIG_0_HIGH 0x0220 -#define PHB_CONFIG_0_LOW 0x0230 -#define PHB_CONFIG_0_END 0x0240 -#define PHB_MEM_2_LOW 0x02B0 -#define PHB_MEM_2_HIGH 0x02C0 -#define PHB_MEM_2_SIZE_HIGH 0x02D0 -#define PHB_MEM_2_SIZE_LOW 0x02E0 -#define PHB_DOSHOLE_OFFSET 0x08E0 - -/* CalIOC2 specific */ -#define PHB_SAVIOR_L2 0x0DB0 -#define PHB_PAGE_MIG_CTRL 0x0DA8 -#define PHB_PAGE_MIG_DEBUG 0x0DA0 -#define PHB_ROOT_COMPLEX_STATUS 0x0CB0 - -/* PHB_CONFIG_RW */ -#define PHB_TCE_ENABLE 0x20000000 -#define PHB_SLOT_DISABLE 0x1C000000 -#define PHB_DAC_DISABLE 0x01000000 -#define PHB_MEM2_ENABLE 0x00400000 -#define PHB_MCSR_ENABLE 0x00100000 -/* TAR (Table Address Register) */ -#define TAR_SW_BITS 0x0000ffffffff800fUL -#define TAR_VALID 0x0000000000000008UL -/* CSR (Channel/DMA Status Register) */ -#define CSR_AGENT_MASK 0xffe0ffff -/* CCR (Calgary Configuration Register) */ -#define CCR_2SEC_TIMEOUT 0x000000000000000EUL -/* PMCR/PMDR (Page Migration Control/Debug Registers */ -#define PMR_SOFTSTOP 0x80000000 -#define PMR_SOFTSTOPFAULT 0x40000000 -#define PMR_HARDSTOP 0x20000000 - -#define MAX_NUM_OF_PHBS 8 /* how many PHBs in total? */ -#define MAX_NUM_CHASSIS 8 /* max number of chassis */ -/* MAX_PHB_BUS_NUM is the maximal possible dev->bus->number */ -#define MAX_PHB_BUS_NUM (MAX_NUM_OF_PHBS * MAX_NUM_CHASSIS * 2) -#define PHBS_PER_CALGARY 4 - -/* register offsets in Calgary's internal register space */ -static const unsigned long tar_offsets[] = { - 0x0580 /* TAR0 */, - 0x0588 /* TAR1 */, - 0x0590 /* TAR2 */, - 0x0598 /* TAR3 */ -}; - -static const unsigned long split_queue_offsets[] = { - 0x4870 /* SPLIT QUEUE 0 */, - 0x5870 /* SPLIT QUEUE 1 */, - 0x6870 /* SPLIT QUEUE 2 */, - 0x7870 /* SPLIT QUEUE 3 */ -}; - -static const unsigned long phb_offsets[] = { - 0x8000 /* PHB0 */, - 0x9000 /* PHB1 */, - 0xA000 /* PHB2 */, - 0xB000 /* PHB3 */ -}; - -/* PHB debug registers */ - -static const unsigned long phb_debug_offsets[] = { - 0x4000 /* PHB 0 DEBUG */, - 0x5000 /* PHB 1 DEBUG */, - 0x6000 /* PHB 2 DEBUG */, - 0x7000 /* PHB 3 DEBUG */ -}; - -/* - * STUFF register for each debug PHB, - * byte 1 = start bus number, byte 2 = end bus number - */ - -#define PHB_DEBUG_STUFF_OFFSET 0x0020 - -#define EMERGENCY_PAGES 32 /* = 128KB */ - -unsigned int specified_table_size = TCE_TABLE_SIZE_UNSPECIFIED; -static int translate_empty_slots __read_mostly = 0; -static int calgary_detected __read_mostly = 0; - -static struct rio_table_hdr *rio_table_hdr __initdata; -static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata; -static struct rio_detail *rio_devs[MAX_NUMNODES * 4] __initdata; - -struct calgary_bus_info { - void *tce_space; - unsigned char translation_disabled; - signed char phbid; - void __iomem *bbar; -}; - -static void calgary_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev); -static void calgary_tce_cache_blast(struct iommu_table *tbl); -static void calgary_dump_error_regs(struct iommu_table *tbl); -static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev); -static void calioc2_tce_cache_blast(struct iommu_table *tbl); -static void calioc2_dump_error_regs(struct iommu_table *tbl); - -static struct cal_chipset_ops calgary_chip_ops = { - .handle_quirks = calgary_handle_quirks, - .tce_cache_blast = calgary_tce_cache_blast, - .dump_error_regs = calgary_dump_error_regs -}; - -static struct cal_chipset_ops calioc2_chip_ops = { - .handle_quirks = calioc2_handle_quirks, - .tce_cache_blast = calioc2_tce_cache_blast, - .dump_error_regs = calioc2_dump_error_regs -}; - -static struct calgary_bus_info bus_info[MAX_PHB_BUS_NUM] = { { NULL, 0, 0 }, }; - -/* enable this to stress test the chip's TCE cache */ -#ifdef CONFIG_IOMMU_DEBUG -int debugging __read_mostly = 1; - -static inline unsigned long verify_bit_range(unsigned long* bitmap, - int expected, unsigned long start, unsigned long end) -{ - unsigned long idx = start; - - BUG_ON(start >= end); - - while (idx < end) { - if (!!test_bit(idx, bitmap) != expected) - return idx; - ++idx; - } - - /* all bits have the expected value */ - return ~0UL; -} -#else /* debugging is disabled */ -int debugging __read_mostly = 0; - -static inline unsigned long verify_bit_range(unsigned long* bitmap, - int expected, unsigned long start, unsigned long end) -{ - return ~0UL; -} - -#endif /* CONFIG_IOMMU_DEBUG */ - -static inline unsigned int num_dma_pages(unsigned long dma, unsigned int dmalen) -{ - unsigned int npages; - - npages = PAGE_ALIGN(dma + dmalen) - (dma & PAGE_MASK); - npages >>= PAGE_SHIFT; - - return npages; -} - -static inline int translate_phb(struct pci_dev* dev) -{ - int disabled = bus_info[dev->bus->number].translation_disabled; - return !disabled; -} - -static void iommu_range_reserve(struct iommu_table *tbl, - unsigned long start_addr, unsigned int npages) -{ - unsigned long index; - unsigned long end; - unsigned long badbit; - unsigned long flags; - - index = start_addr >> PAGE_SHIFT; - - /* bail out if we're asked to reserve a region we don't cover */ - if (index >= tbl->it_size) - return; - - end = index + npages; - if (end > tbl->it_size) /* don't go off the table */ - end = tbl->it_size; - - spin_lock_irqsave(&tbl->it_lock, flags); - - badbit = verify_bit_range(tbl->it_map, 0, index, end); - if (badbit != ~0UL) { - if (printk_ratelimit()) - printk(KERN_ERR "Calgary: entry already allocated at " - "0x%lx tbl %p dma 0x%lx npages %u\n", - badbit, tbl, start_addr, npages); - } - - set_bit_string(tbl->it_map, index, npages); - - spin_unlock_irqrestore(&tbl->it_lock, flags); -} - -static unsigned long iommu_range_alloc(struct iommu_table *tbl, - unsigned int npages) -{ - unsigned long flags; - unsigned long offset; - - BUG_ON(npages == 0); - - spin_lock_irqsave(&tbl->it_lock, flags); - - offset = find_next_zero_string(tbl->it_map, tbl->it_hint, - tbl->it_size, npages); - if (offset == ~0UL) { - tbl->chip_ops->tce_cache_blast(tbl); - offset = find_next_zero_string(tbl->it_map, 0, - tbl->it_size, npages); - if (offset == ~0UL) { - printk(KERN_WARNING "Calgary: IOMMU full.\n"); - spin_unlock_irqrestore(&tbl->it_lock, flags); - if (panic_on_overflow) - panic("Calgary: fix the allocator.\n"); - else - return bad_dma_address; - } - } - - set_bit_string(tbl->it_map, offset, npages); - tbl->it_hint = offset + npages; - BUG_ON(tbl->it_hint > tbl->it_size); - - spin_unlock_irqrestore(&tbl->it_lock, flags); - - return offset; -} - -static dma_addr_t iommu_alloc(struct iommu_table *tbl, void *vaddr, - unsigned int npages, int direction) -{ - unsigned long entry; - dma_addr_t ret = bad_dma_address; - - entry = iommu_range_alloc(tbl, npages); - - if (unlikely(entry == bad_dma_address)) - goto error; - - /* set the return dma address */ - ret = (entry << PAGE_SHIFT) | ((unsigned long)vaddr & ~PAGE_MASK); - - /* put the TCEs in the HW table */ - tce_build(tbl, entry, npages, (unsigned long)vaddr & PAGE_MASK, - direction); - - return ret; - -error: - printk(KERN_WARNING "Calgary: failed to allocate %u pages in " - "iommu %p\n", npages, tbl); - return bad_dma_address; -} - -static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, - unsigned int npages) -{ - unsigned long entry; - unsigned long badbit; - unsigned long badend; - unsigned long flags; - - /* were we called with bad_dma_address? */ - badend = bad_dma_address + (EMERGENCY_PAGES * PAGE_SIZE); - if (unlikely((dma_addr >= bad_dma_address) && (dma_addr < badend))) { - printk(KERN_ERR "Calgary: driver tried unmapping bad DMA " - "address 0x%Lx\n", dma_addr); - WARN_ON(1); - return; - } - - entry = dma_addr >> PAGE_SHIFT; - - BUG_ON(entry + npages > tbl->it_size); - - tce_free(tbl, entry, npages); - - spin_lock_irqsave(&tbl->it_lock, flags); - - badbit = verify_bit_range(tbl->it_map, 1, entry, entry + npages); - if (badbit != ~0UL) { - if (printk_ratelimit()) - printk(KERN_ERR "Calgary: bit is off at 0x%lx " - "tbl %p dma 0x%Lx entry 0x%lx npages %u\n", - badbit, tbl, dma_addr, entry, npages); - } - - __clear_bit_string(tbl->it_map, entry, npages); - - spin_unlock_irqrestore(&tbl->it_lock, flags); -} - -static inline struct iommu_table *find_iommu_table(struct device *dev) -{ - struct pci_dev *pdev; - struct pci_bus *pbus; - struct iommu_table *tbl; - - pdev = to_pci_dev(dev); - - pbus = pdev->bus; - - /* is the device behind a bridge? Look for the root bus */ - while (pbus->parent) - pbus = pbus->parent; - - tbl = pci_iommu(pbus); - - BUG_ON(tbl && (tbl->it_busno != pbus->number)); - - return tbl; -} - -static void calgary_unmap_sg(struct device *dev, - struct scatterlist *sglist, int nelems, int direction) -{ - struct iommu_table *tbl = find_iommu_table(dev); - - if (!translate_phb(to_pci_dev(dev))) - return; - - while (nelems--) { - unsigned int npages; - dma_addr_t dma = sglist->dma_address; - unsigned int dmalen = sglist->dma_length; - - if (dmalen == 0) - break; - - npages = num_dma_pages(dma, dmalen); - iommu_free(tbl, dma, npages); - sglist++; - } -} - -static int calgary_nontranslate_map_sg(struct device* dev, - struct scatterlist *sg, int nelems, int direction) -{ - int i; - - for (i = 0; i < nelems; i++ ) { - struct scatterlist *s = &sg[i]; - BUG_ON(!s->page); - s->dma_address = virt_to_bus(page_address(s->page) +s->offset); - s->dma_length = s->length; - } - return nelems; -} - -static int calgary_map_sg(struct device *dev, struct scatterlist *sg, - int nelems, int direction) -{ - struct iommu_table *tbl = find_iommu_table(dev); - unsigned long vaddr; - unsigned int npages; - unsigned long entry; - int i; - - if (!translate_phb(to_pci_dev(dev))) - return calgary_nontranslate_map_sg(dev, sg, nelems, direction); - - for (i = 0; i < nelems; i++ ) { - struct scatterlist *s = &sg[i]; - BUG_ON(!s->page); - - vaddr = (unsigned long)page_address(s->page) + s->offset; - npages = num_dma_pages(vaddr, s->length); - - entry = iommu_range_alloc(tbl, npages); - if (entry == bad_dma_address) { - /* makes sure unmap knows to stop */ - s->dma_length = 0; - goto error; - } - - s->dma_address = (entry << PAGE_SHIFT) | s->offset; - - /* insert into HW table */ - tce_build(tbl, entry, npages, vaddr & PAGE_MASK, - direction); - - s->dma_length = s->length; - } - - return nelems; -error: - calgary_unmap_sg(dev, sg, nelems, direction); - for (i = 0; i < nelems; i++) { - sg[i].dma_address = bad_dma_address; - sg[i].dma_length = 0; - } - return 0; -} - -static dma_addr_t calgary_map_single(struct device *dev, void *vaddr, - size_t size, int direction) -{ - dma_addr_t dma_handle = bad_dma_address; - unsigned long uaddr; - unsigned int npages; - struct iommu_table *tbl = find_iommu_table(dev); - - uaddr = (unsigned long)vaddr; - npages = num_dma_pages(uaddr, size); - - if (translate_phb(to_pci_dev(dev))) - dma_handle = iommu_alloc(tbl, vaddr, npages, direction); - else - dma_handle = virt_to_bus(vaddr); - - return dma_handle; -} - -static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle, - size_t size, int direction) -{ - struct iommu_table *tbl = find_iommu_table(dev); - unsigned int npages; - - if (!translate_phb(to_pci_dev(dev))) - return; - - npages = num_dma_pages(dma_handle, size); - iommu_free(tbl, dma_handle, npages); -} - -static void* calgary_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - void *ret = NULL; - dma_addr_t mapping; - unsigned int npages, order; - struct iommu_table *tbl = find_iommu_table(dev); - - size = PAGE_ALIGN(size); /* size rounded up to full pages */ - npages = size >> PAGE_SHIFT; - order = get_order(size); - - /* alloc enough pages (and possibly more) */ - ret = (void *)__get_free_pages(flag, order); - if (!ret) - goto error; - memset(ret, 0, size); - - if (translate_phb(to_pci_dev(dev))) { - /* set up tces to cover the allocated range */ - mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL); - if (mapping == bad_dma_address) - goto free; - - *dma_handle = mapping; - } else /* non translated slot */ - *dma_handle = virt_to_bus(ret); - - return ret; - -free: - free_pages((unsigned long)ret, get_order(size)); - ret = NULL; -error: - return ret; -} - -static const struct dma_mapping_ops calgary_dma_ops = { - .alloc_coherent = calgary_alloc_coherent, - .map_single = calgary_map_single, - .unmap_single = calgary_unmap_single, - .map_sg = calgary_map_sg, - .unmap_sg = calgary_unmap_sg, -}; - -static inline void __iomem * busno_to_bbar(unsigned char num) -{ - return bus_info[num].bbar; -} - -static inline int busno_to_phbid(unsigned char num) -{ - return bus_info[num].phbid; -} - -static inline unsigned long split_queue_offset(unsigned char num) -{ - size_t idx = busno_to_phbid(num); - - return split_queue_offsets[idx]; -} - -static inline unsigned long tar_offset(unsigned char num) -{ - size_t idx = busno_to_phbid(num); - - return tar_offsets[idx]; -} - -static inline unsigned long phb_offset(unsigned char num) -{ - size_t idx = busno_to_phbid(num); - - return phb_offsets[idx]; -} - -static inline void __iomem* calgary_reg(void __iomem *bar, unsigned long offset) -{ - unsigned long target = ((unsigned long)bar) | offset; - return (void __iomem*)target; -} - -static inline int is_calioc2(unsigned short device) -{ - return (device == PCI_DEVICE_ID_IBM_CALIOC2); -} - -static inline int is_calgary(unsigned short device) -{ - return (device == PCI_DEVICE_ID_IBM_CALGARY); -} - -static inline int is_cal_pci_dev(unsigned short device) -{ - return (is_calgary(device) || is_calioc2(device)); -} - -static void calgary_tce_cache_blast(struct iommu_table *tbl) -{ - u64 val; - u32 aer; - int i = 0; - void __iomem *bbar = tbl->bbar; - void __iomem *target; - - /* disable arbitration on the bus */ - target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_AER_OFFSET); - aer = readl(target); - writel(0, target); - - /* read plssr to ensure it got there */ - target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_PLSSR_OFFSET); - val = readl(target); - - /* poll split queues until all DMA activity is done */ - target = calgary_reg(bbar, split_queue_offset(tbl->it_busno)); - do { - val = readq(target); - i++; - } while ((val & 0xff) != 0xff && i < 100); - if (i == 100) - printk(KERN_WARNING "Calgary: PCI bus not quiesced, " - "continuing anyway\n"); - - /* invalidate TCE cache */ - target = calgary_reg(bbar, tar_offset(tbl->it_busno)); - writeq(tbl->tar_val, target); - - /* enable arbitration */ - target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_AER_OFFSET); - writel(aer, target); - (void)readl(target); /* flush */ -} - -static void calioc2_tce_cache_blast(struct iommu_table *tbl) -{ - void __iomem *bbar = tbl->bbar; - void __iomem *target; - u64 val64; - u32 val; - int i = 0; - int count = 1; - unsigned char bus = tbl->it_busno; - -begin: - printk(KERN_DEBUG "Calgary: CalIOC2 bus 0x%x entering tce cache blast " - "sequence - count %d\n", bus, count); - - /* 1. using the Page Migration Control reg set SoftStop */ - target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_CTRL); - val = be32_to_cpu(readl(target)); - printk(KERN_DEBUG "1a. read 0x%x [LE] from %p\n", val, target); - val |= PMR_SOFTSTOP; - printk(KERN_DEBUG "1b. writing 0x%x [LE] to %p\n", val, target); - writel(cpu_to_be32(val), target); - - /* 2. poll split queues until all DMA activity is done */ - printk(KERN_DEBUG "2a. starting to poll split queues\n"); - target = calgary_reg(bbar, split_queue_offset(bus)); - do { - val64 = readq(target); - i++; - } while ((val64 & 0xff) != 0xff && i < 100); - if (i == 100) - printk(KERN_WARNING "CalIOC2: PCI bus not quiesced, " - "continuing anyway\n"); - - /* 3. poll Page Migration DEBUG for SoftStopFault */ - target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_DEBUG); - val = be32_to_cpu(readl(target)); - printk(KERN_DEBUG "3. read 0x%x [LE] from %p\n", val, target); - - /* 4. if SoftStopFault - goto (1) */ - if (val & PMR_SOFTSTOPFAULT) { - if (++count < 100) - goto begin; - else { - printk(KERN_WARNING "CalIOC2: too many SoftStopFaults, " - "aborting TCE cache flush sequence!\n"); - return; /* pray for the best */ - } - } - - /* 5. Slam into HardStop by reading PHB_PAGE_MIG_CTRL */ - target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_CTRL); - printk(KERN_DEBUG "5a. slamming into HardStop by reading %p\n", target); - val = be32_to_cpu(readl(target)); - printk(KERN_DEBUG "5b. read 0x%x [LE] from %p\n", val, target); - target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_DEBUG); - val = be32_to_cpu(readl(target)); - printk(KERN_DEBUG "5c. read 0x%x [LE] from %p (debug)\n", val, target); - - /* 6. invalidate TCE cache */ - printk(KERN_DEBUG "6. invalidating TCE cache\n"); - target = calgary_reg(bbar, tar_offset(bus)); - writeq(tbl->tar_val, target); - - /* 7. Re-read PMCR */ - printk(KERN_DEBUG "7a. Re-reading PMCR\n"); - target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_CTRL); - val = be32_to_cpu(readl(target)); - printk(KERN_DEBUG "7b. read 0x%x [LE] from %p\n", val, target); - - /* 8. Remove HardStop */ - printk(KERN_DEBUG "8a. removing HardStop from PMCR\n"); - target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_CTRL); - val = 0; - printk(KERN_DEBUG "8b. writing 0x%x [LE] to %p\n", val, target); - writel(cpu_to_be32(val), target); - val = be32_to_cpu(readl(target)); - printk(KERN_DEBUG "8c. read 0x%x [LE] from %p\n", val, target); -} - -static void __init calgary_reserve_mem_region(struct pci_dev *dev, u64 start, - u64 limit) -{ - unsigned int numpages; - - limit = limit | 0xfffff; - limit++; - - numpages = ((limit - start) >> PAGE_SHIFT); - iommu_range_reserve(pci_iommu(dev->bus), start, numpages); -} - -static void __init calgary_reserve_peripheral_mem_1(struct pci_dev *dev) -{ - void __iomem *target; - u64 low, high, sizelow; - u64 start, limit; - struct iommu_table *tbl = pci_iommu(dev->bus); - unsigned char busnum = dev->bus->number; - void __iomem *bbar = tbl->bbar; - - /* peripheral MEM_1 region */ - target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_1_LOW); - low = be32_to_cpu(readl(target)); - target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_1_HIGH); - high = be32_to_cpu(readl(target)); - target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_1_SIZE); - sizelow = be32_to_cpu(readl(target)); - - start = (high << 32) | low; - limit = sizelow; - - calgary_reserve_mem_region(dev, start, limit); -} - -static void __init calgary_reserve_peripheral_mem_2(struct pci_dev *dev) -{ - void __iomem *target; - u32 val32; - u64 low, high, sizelow, sizehigh; - u64 start, limit; - struct iommu_table *tbl = pci_iommu(dev->bus); - unsigned char busnum = dev->bus->number; - void __iomem *bbar = tbl->bbar; - - /* is it enabled? */ - target = calgary_reg(bbar, phb_offset(busnum) | PHB_CONFIG_RW_OFFSET); - val32 = be32_to_cpu(readl(target)); - if (!(val32 & PHB_MEM2_ENABLE)) - return; - - target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_2_LOW); - low = be32_to_cpu(readl(target)); - target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_2_HIGH); - high = be32_to_cpu(readl(target)); - target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_2_SIZE_LOW); - sizelow = be32_to_cpu(readl(target)); - target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_2_SIZE_HIGH); - sizehigh = be32_to_cpu(readl(target)); - - start = (high << 32) | low; - limit = (sizehigh << 32) | sizelow; - - calgary_reserve_mem_region(dev, start, limit); -} - -/* - * some regions of the IO address space do not get translated, so we - * must not give devices IO addresses in those regions. The regions - * are the 640KB-1MB region and the two PCI peripheral memory holes. - * Reserve all of them in the IOMMU bitmap to avoid giving them out - * later. - */ -static void __init calgary_reserve_regions(struct pci_dev *dev) -{ - unsigned int npages; - u64 start; - struct iommu_table *tbl = pci_iommu(dev->bus); - - /* reserve EMERGENCY_PAGES from bad_dma_address and up */ - iommu_range_reserve(tbl, bad_dma_address, EMERGENCY_PAGES); - - /* avoid the BIOS/VGA first 640KB-1MB region */ - /* for CalIOC2 - avoid the entire first MB */ - if (is_calgary(dev->device)) { - start = (640 * 1024); - npages = ((1024 - 640) * 1024) >> PAGE_SHIFT; - } else { /* calioc2 */ - start = 0; - npages = (1 * 1024 * 1024) >> PAGE_SHIFT; - } - iommu_range_reserve(tbl, start, npages); - - /* reserve the two PCI peripheral memory regions in IO space */ - calgary_reserve_peripheral_mem_1(dev); - calgary_reserve_peripheral_mem_2(dev); -} - -static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar) -{ - u64 val64; - u64 table_phys; - void __iomem *target; - int ret; - struct iommu_table *tbl; - - /* build TCE tables for each PHB */ - ret = build_tce_table(dev, bbar); - if (ret) - return ret; - - tbl = pci_iommu(dev->bus); - tbl->it_base = (unsigned long)bus_info[dev->bus->number].tce_space; - tce_free(tbl, 0, tbl->it_size); - - if (is_calgary(dev->device)) - tbl->chip_ops = &calgary_chip_ops; - else if (is_calioc2(dev->device)) - tbl->chip_ops = &calioc2_chip_ops; - else - BUG(); - - calgary_reserve_regions(dev); - - /* set TARs for each PHB */ - target = calgary_reg(bbar, tar_offset(dev->bus->number)); - val64 = be64_to_cpu(readq(target)); - - /* zero out all TAR bits under sw control */ - val64 &= ~TAR_SW_BITS; - table_phys = (u64)__pa(tbl->it_base); - - val64 |= table_phys; - - BUG_ON(specified_table_size > TCE_TABLE_SIZE_8M); - val64 |= (u64) specified_table_size; - - tbl->tar_val = cpu_to_be64(val64); - - writeq(tbl->tar_val, target); - readq(target); /* flush */ - - return 0; -} - -static void __init calgary_free_bus(struct pci_dev *dev) -{ - u64 val64; - struct iommu_table *tbl = pci_iommu(dev->bus); - void __iomem *target; - unsigned int bitmapsz; - - target = calgary_reg(tbl->bbar, tar_offset(dev->bus->number)); - val64 = be64_to_cpu(readq(target)); - val64 &= ~TAR_SW_BITS; - writeq(cpu_to_be64(val64), target); - readq(target); /* flush */ - - bitmapsz = tbl->it_size / BITS_PER_BYTE; - free_pages((unsigned long)tbl->it_map, get_order(bitmapsz)); - tbl->it_map = NULL; - - kfree(tbl); - - set_pci_iommu(dev->bus, NULL); - - /* Can't free bootmem allocated memory after system is up :-( */ - bus_info[dev->bus->number].tce_space = NULL; -} - -static void calgary_dump_error_regs(struct iommu_table *tbl) -{ - void __iomem *bbar = tbl->bbar; - void __iomem *target; - u32 csr, plssr; - - target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_CSR_OFFSET); - csr = be32_to_cpu(readl(target)); - - target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_PLSSR_OFFSET); - plssr = be32_to_cpu(readl(target)); - - /* If no error, the agent ID in the CSR is not valid */ - printk(KERN_EMERG "Calgary: DMA error on Calgary PHB 0x%x, " - "0x%08x@CSR 0x%08x@PLSSR\n", tbl->it_busno, csr, plssr); -} - -static void calioc2_dump_error_regs(struct iommu_table *tbl) -{ - void __iomem *bbar = tbl->bbar; - u32 csr, csmr, plssr, mck, rcstat; - void __iomem *target; - unsigned long phboff = phb_offset(tbl->it_busno); - unsigned long erroff; - u32 errregs[7]; - int i; - - /* dump CSR */ - target = calgary_reg(bbar, phboff | PHB_CSR_OFFSET); - csr = be32_to_cpu(readl(target)); - /* dump PLSSR */ - target = calgary_reg(bbar, phboff | PHB_PLSSR_OFFSET); - plssr = be32_to_cpu(readl(target)); - /* dump CSMR */ - target = calgary_reg(bbar, phboff | 0x290); - csmr = be32_to_cpu(readl(target)); - /* dump mck */ - target = calgary_reg(bbar, phboff | 0x800); - mck = be32_to_cpu(readl(target)); - - printk(KERN_EMERG "Calgary: DMA error on CalIOC2 PHB 0x%x\n", - tbl->it_busno); - - printk(KERN_EMERG "Calgary: 0x%08x@CSR 0x%08x@PLSSR 0x%08x@CSMR 0x%08x@MCK\n", - csr, plssr, csmr, mck); - - /* dump rest of error regs */ - printk(KERN_EMERG "Calgary: "); - for (i = 0; i < ARRAY_SIZE(errregs); i++) { - /* err regs are at 0x810 - 0x870 */ - erroff = (0x810 + (i * 0x10)); - target = calgary_reg(bbar, phboff | erroff); - errregs[i] = be32_to_cpu(readl(target)); - printk("0x%08x@0x%lx ", errregs[i], erroff); - } - printk("\n"); - - /* root complex status */ - target = calgary_reg(bbar, phboff | PHB_ROOT_COMPLEX_STATUS); - rcstat = be32_to_cpu(readl(target)); - printk(KERN_EMERG "Calgary: 0x%08x@0x%x\n", rcstat, - PHB_ROOT_COMPLEX_STATUS); -} - -static void calgary_watchdog(unsigned long data) -{ - struct pci_dev *dev = (struct pci_dev *)data; - struct iommu_table *tbl = pci_iommu(dev->bus); - void __iomem *bbar = tbl->bbar; - u32 val32; - void __iomem *target; - - target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_CSR_OFFSET); - val32 = be32_to_cpu(readl(target)); - - /* If no error, the agent ID in the CSR is not valid */ - if (val32 & CSR_AGENT_MASK) { - tbl->chip_ops->dump_error_regs(tbl); - - /* reset error */ - writel(0, target); - - /* Disable bus that caused the error */ - target = calgary_reg(bbar, phb_offset(tbl->it_busno) | - PHB_CONFIG_RW_OFFSET); - val32 = be32_to_cpu(readl(target)); - val32 |= PHB_SLOT_DISABLE; - writel(cpu_to_be32(val32), target); - readl(target); /* flush */ - } else { - /* Reset the timer */ - mod_timer(&tbl->watchdog_timer, jiffies + 2 * HZ); - } -} - -static void __init calgary_set_split_completion_timeout(void __iomem *bbar, - unsigned char busnum, unsigned long timeout) -{ - u64 val64; - void __iomem *target; - unsigned int phb_shift = ~0; /* silence gcc */ - u64 mask; - - switch (busno_to_phbid(busnum)) { - case 0: phb_shift = (63 - 19); - break; - case 1: phb_shift = (63 - 23); - break; - case 2: phb_shift = (63 - 27); - break; - case 3: phb_shift = (63 - 35); - break; - default: - BUG_ON(busno_to_phbid(busnum)); - } - - target = calgary_reg(bbar, CALGARY_CONFIG_REG); - val64 = be64_to_cpu(readq(target)); - - /* zero out this PHB's timer bits */ - mask = ~(0xFUL << phb_shift); - val64 &= mask; - val64 |= (timeout << phb_shift); - writeq(cpu_to_be64(val64), target); - readq(target); /* flush */ -} - -static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev) -{ - unsigned char busnum = dev->bus->number; - void __iomem *bbar = tbl->bbar; - void __iomem *target; - u32 val; - - /* - * CalIOC2 designers recommend setting bit 8 in 0xnDB0 to 1 - */ - target = calgary_reg(bbar, phb_offset(busnum) | PHB_SAVIOR_L2); - val = cpu_to_be32(readl(target)); - val |= 0x00800000; - writel(cpu_to_be32(val), target); -} - -static void calgary_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev) -{ - unsigned char busnum = dev->bus->number; - - /* - * Give split completion a longer timeout on bus 1 for aic94xx - * http://bugzilla.kernel.org/show_bug.cgi?id=7180 - */ - if (is_calgary(dev->device) && (busnum == 1)) - calgary_set_split_completion_timeout(tbl->bbar, busnum, - CCR_2SEC_TIMEOUT); -} - -static void __init calgary_enable_translation(struct pci_dev *dev) -{ - u32 val32; - unsigned char busnum; - void __iomem *target; - void __iomem *bbar; - struct iommu_table *tbl; - - busnum = dev->bus->number; - tbl = pci_iommu(dev->bus); - bbar = tbl->bbar; - - /* enable TCE in PHB Config Register */ - target = calgary_reg(bbar, phb_offset(busnum) | PHB_CONFIG_RW_OFFSET); - val32 = be32_to_cpu(readl(target)); - val32 |= PHB_TCE_ENABLE | PHB_DAC_DISABLE | PHB_MCSR_ENABLE; - - printk(KERN_INFO "Calgary: enabling translation on %s PHB %#x\n", - (dev->device == PCI_DEVICE_ID_IBM_CALGARY) ? - "Calgary" : "CalIOC2", busnum); - printk(KERN_INFO "Calgary: errant DMAs will now be prevented on this " - "bus.\n"); - - writel(cpu_to_be32(val32), target); - readl(target); /* flush */ - - init_timer(&tbl->watchdog_timer); - tbl->watchdog_timer.function = &calgary_watchdog; - tbl->watchdog_timer.data = (unsigned long)dev; - mod_timer(&tbl->watchdog_timer, jiffies); -} - -static void __init calgary_disable_translation(struct pci_dev *dev) -{ - u32 val32; - unsigned char busnum; - void __iomem *target; - void __iomem *bbar; - struct iommu_table *tbl; - - busnum = dev->bus->number; - tbl = pci_iommu(dev->bus); - bbar = tbl->bbar; - - /* disable TCE in PHB Config Register */ - target = calgary_reg(bbar, phb_offset(busnum) | PHB_CONFIG_RW_OFFSET); - val32 = be32_to_cpu(readl(target)); - val32 &= ~(PHB_TCE_ENABLE | PHB_DAC_DISABLE | PHB_MCSR_ENABLE); - - printk(KERN_INFO "Calgary: disabling translation on PHB %#x!\n", busnum); - writel(cpu_to_be32(val32), target); - readl(target); /* flush */ - - del_timer_sync(&tbl->watchdog_timer); -} - -static void __init calgary_init_one_nontraslated(struct pci_dev *dev) -{ - pci_dev_get(dev); - set_pci_iommu(dev->bus, NULL); - - /* is the device behind a bridge? */ - if (dev->bus->parent) - dev->bus->parent->self = dev; - else - dev->bus->self = dev; -} - -static int __init calgary_init_one(struct pci_dev *dev) -{ - void __iomem *bbar; - struct iommu_table *tbl; - int ret; - - BUG_ON(dev->bus->number >= MAX_PHB_BUS_NUM); - - bbar = busno_to_bbar(dev->bus->number); - ret = calgary_setup_tar(dev, bbar); - if (ret) - goto done; - - pci_dev_get(dev); - - if (dev->bus->parent) { - if (dev->bus->parent->self) - printk(KERN_WARNING "Calgary: IEEEE, dev %p has " - "bus->parent->self!\n", dev); - dev->bus->parent->self = dev; - } else - dev->bus->self = dev; - - tbl = pci_iommu(dev->bus); - tbl->chip_ops->handle_quirks(tbl, dev); - - calgary_enable_translation(dev); - - return 0; - -done: - return ret; -} - -static int __init calgary_locate_bbars(void) -{ - int ret; - int rioidx, phb, bus; - void __iomem *bbar; - void __iomem *target; - unsigned long offset; - u8 start_bus, end_bus; - u32 val; - - ret = -ENODATA; - for (rioidx = 0; rioidx < rio_table_hdr->num_rio_dev; rioidx++) { - struct rio_detail *rio = rio_devs[rioidx]; - - if ((rio->type != COMPAT_CALGARY) && (rio->type != ALT_CALGARY)) - continue; - - /* map entire 1MB of Calgary config space */ - bbar = ioremap_nocache(rio->BBAR, 1024 * 1024); - if (!bbar) - goto error; - - for (phb = 0; phb < PHBS_PER_CALGARY; phb++) { - offset = phb_debug_offsets[phb] | PHB_DEBUG_STUFF_OFFSET; - target = calgary_reg(bbar, offset); - - val = be32_to_cpu(readl(target)); - - start_bus = (u8)((val & 0x00FF0000) >> 16); - end_bus = (u8)((val & 0x0000FF00) >> 8); - - if (end_bus) { - for (bus = start_bus; bus <= end_bus; bus++) { - bus_info[bus].bbar = bbar; - bus_info[bus].phbid = phb; - } - } else { - bus_info[start_bus].bbar = bbar; - bus_info[start_bus].phbid = phb; - } - } - } - - return 0; - -error: - /* scan bus_info and iounmap any bbars we previously ioremap'd */ - for (bus = 0; bus < ARRAY_SIZE(bus_info); bus++) - if (bus_info[bus].bbar) - iounmap(bus_info[bus].bbar); - - return ret; -} - -static int __init calgary_init(void) -{ - int ret; - struct pci_dev *dev = NULL; - void *tce_space; - - ret = calgary_locate_bbars(); - if (ret) - return ret; - - do { - dev = pci_get_device(PCI_VENDOR_ID_IBM, PCI_ANY_ID, dev); - if (!dev) - break; - if (!is_cal_pci_dev(dev->device)) - continue; - if (!translate_phb(dev)) { - calgary_init_one_nontraslated(dev); - continue; - } - tce_space = bus_info[dev->bus->number].tce_space; - if (!tce_space && !translate_empty_slots) - continue; - - ret = calgary_init_one(dev); - if (ret) - goto error; - } while (1); - - return ret; - -error: - do { - dev = pci_get_device_reverse(PCI_VENDOR_ID_IBM, - PCI_ANY_ID, dev); - if (!dev) - break; - if (!is_cal_pci_dev(dev->device)) - continue; - if (!translate_phb(dev)) { - pci_dev_put(dev); - continue; - } - if (!bus_info[dev->bus->number].tce_space && !translate_empty_slots) - continue; - - calgary_disable_translation(dev); - calgary_free_bus(dev); - pci_dev_put(dev); /* Undo calgary_init_one()'s pci_dev_get() */ - } while (1); - - return ret; -} - -static inline int __init determine_tce_table_size(u64 ram) -{ - int ret; - - if (specified_table_size != TCE_TABLE_SIZE_UNSPECIFIED) - return specified_table_size; - - /* - * Table sizes are from 0 to 7 (TCE_TABLE_SIZE_64K to - * TCE_TABLE_SIZE_8M). Table size 0 has 8K entries and each - * larger table size has twice as many entries, so shift the - * max ram address by 13 to divide by 8K and then look at the - * order of the result to choose between 0-7. - */ - ret = get_order(ram >> 13); - if (ret > TCE_TABLE_SIZE_8M) - ret = TCE_TABLE_SIZE_8M; - - return ret; -} - -static int __init build_detail_arrays(void) -{ - unsigned long ptr; - int i, scal_detail_size, rio_detail_size; - - if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){ - printk(KERN_WARNING - "Calgary: MAX_NUMNODES too low! Defined as %d, " - "but system has %d nodes.\n", - MAX_NUMNODES, rio_table_hdr->num_scal_dev); - return -ENODEV; - } - - switch (rio_table_hdr->version){ - case 2: - scal_detail_size = 11; - rio_detail_size = 13; - break; - case 3: - scal_detail_size = 12; - rio_detail_size = 15; - break; - default: - printk(KERN_WARNING - "Calgary: Invalid Rio Grande Table Version: %d\n", - rio_table_hdr->version); - return -EPROTO; - } - - ptr = ((unsigned long)rio_table_hdr) + 3; - for (i = 0; i < rio_table_hdr->num_scal_dev; - i++, ptr += scal_detail_size) - scal_devs[i] = (struct scal_detail *)ptr; - - for (i = 0; i < rio_table_hdr->num_rio_dev; - i++, ptr += rio_detail_size) - rio_devs[i] = (struct rio_detail *)ptr; - - return 0; -} - -static int __init calgary_bus_has_devices(int bus, unsigned short pci_dev) -{ - int dev; - u32 val; - - if (pci_dev == PCI_DEVICE_ID_IBM_CALIOC2) { - /* - * FIXME: properly scan for devices accross the - * PCI-to-PCI bridge on every CalIOC2 port. - */ - return 1; - } - - for (dev = 1; dev < 8; dev++) { - val = read_pci_config(bus, dev, 0, 0); - if (val != 0xffffffff) - break; - } - return (val != 0xffffffff); -} - -void __init detect_calgary(void) -{ - int bus; - void *tbl; - int calgary_found = 0; - unsigned long ptr; - unsigned int offset, prev_offset; - int ret; - - /* - * if the user specified iommu=off or iommu=soft or we found - * another HW IOMMU already, bail out. - */ - if (swiotlb || no_iommu || iommu_detected) - return; - - if (!use_calgary) - return; - - if (!early_pci_allowed()) - return; - - printk(KERN_DEBUG "Calgary: detecting Calgary via BIOS EBDA area\n"); - - ptr = (unsigned long)phys_to_virt(get_bios_ebda()); - - rio_table_hdr = NULL; - prev_offset = 0; - offset = 0x180; - /* - * The next offset is stored in the 1st word. - * Only parse up until the offset increases: - */ - while (offset > prev_offset) { - /* The block id is stored in the 2nd word */ - if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){ - /* set the pointer past the offset & block id */ - rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4); - break; - } - prev_offset = offset; - offset = *((unsigned short *)(ptr + offset)); - } - if (!rio_table_hdr) { - printk(KERN_DEBUG "Calgary: Unable to locate Rio Grande table " - "in EBDA - bailing!\n"); - return; - } - - ret = build_detail_arrays(); - if (ret) { - printk(KERN_DEBUG "Calgary: build_detail_arrays ret %d\n", ret); - return; - } - - specified_table_size = determine_tce_table_size(end_pfn * PAGE_SIZE); - - for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) { - struct calgary_bus_info *info = &bus_info[bus]; - unsigned short pci_device; - u32 val; - - val = read_pci_config(bus, 0, 0, 0); - pci_device = (val & 0xFFFF0000) >> 16; - - if (!is_cal_pci_dev(pci_device)) - continue; - - if (info->translation_disabled) - continue; - - if (calgary_bus_has_devices(bus, pci_device) || - translate_empty_slots) { - tbl = alloc_tce_table(); - if (!tbl) - goto cleanup; - info->tce_space = tbl; - calgary_found = 1; - } - } - - printk(KERN_DEBUG "Calgary: finished detection, Calgary %s\n", - calgary_found ? "found" : "not found"); - - if (calgary_found) { - iommu_detected = 1; - calgary_detected = 1; - printk(KERN_INFO "PCI-DMA: Calgary IOMMU detected.\n"); - printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, " - "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size, - debugging ? "enabled" : "disabled"); - } - return; - -cleanup: - for (--bus; bus >= 0; --bus) { - struct calgary_bus_info *info = &bus_info[bus]; - - if (info->tce_space) - free_tce_table(info->tce_space); - } -} - -int __init calgary_iommu_init(void) -{ - int ret; - - if (no_iommu || swiotlb) - return -ENODEV; - - if (!calgary_detected) - return -ENODEV; - - /* ok, we're trying to use Calgary - let's roll */ - printk(KERN_INFO "PCI-DMA: Using Calgary IOMMU\n"); - - ret = calgary_init(); - if (ret) { - printk(KERN_ERR "PCI-DMA: Calgary init failed %d, " - "falling back to no_iommu\n", ret); - if (end_pfn > MAX_DMA32_PFN) - printk(KERN_ERR "WARNING more than 4GB of memory, " - "32bit PCI may malfunction.\n"); - return ret; - } - - force_iommu = 1; - bad_dma_address = 0x0; - dma_ops = &calgary_dma_ops; - - return 0; -} - -static int __init calgary_parse_options(char *p) -{ - unsigned int bridge; - size_t len; - char* endp; - - while (*p) { - if (!strncmp(p, "64k", 3)) - specified_table_size = TCE_TABLE_SIZE_64K; - else if (!strncmp(p, "128k", 4)) - specified_table_size = TCE_TABLE_SIZE_128K; - else if (!strncmp(p, "256k", 4)) - specified_table_size = TCE_TABLE_SIZE_256K; - else if (!strncmp(p, "512k", 4)) - specified_table_size = TCE_TABLE_SIZE_512K; - else if (!strncmp(p, "1M", 2)) - specified_table_size = TCE_TABLE_SIZE_1M; - else if (!strncmp(p, "2M", 2)) - specified_table_size = TCE_TABLE_SIZE_2M; - else if (!strncmp(p, "4M", 2)) - specified_table_size = TCE_TABLE_SIZE_4M; - else if (!strncmp(p, "8M", 2)) - specified_table_size = TCE_TABLE_SIZE_8M; - - len = strlen("translate_empty_slots"); - if (!strncmp(p, "translate_empty_slots", len)) - translate_empty_slots = 1; - - len = strlen("disable"); - if (!strncmp(p, "disable", len)) { - p += len; - if (*p == '=') - ++p; - if (*p == '\0') - break; - bridge = simple_strtol(p, &endp, 0); - if (p == endp) - break; - - if (bridge < MAX_PHB_BUS_NUM) { - printk(KERN_INFO "Calgary: disabling " - "translation for PHB %#x\n", bridge); - bus_info[bridge].translation_disabled = 1; - } - } - - p = strpbrk(p, ","); - if (!p) - break; - - p++; /* skip ',' */ - } - return 1; -} -__setup("calgary=", calgary_parse_options); - -static void __init calgary_fixup_one_tce_space(struct pci_dev *dev) -{ - struct iommu_table *tbl; - unsigned int npages; - int i; - - tbl = pci_iommu(dev->bus); - - for (i = 0; i < 4; i++) { - struct resource *r = &dev->resource[PCI_BRIDGE_RESOURCES + i]; - - /* Don't give out TCEs that map MEM resources */ - if (!(r->flags & IORESOURCE_MEM)) - continue; - - /* 0-based? we reserve the whole 1st MB anyway */ - if (!r->start) - continue; - - /* cover the whole region */ - npages = (r->end - r->start) >> PAGE_SHIFT; - npages++; - - iommu_range_reserve(tbl, r->start, npages); - } -} - -static int __init calgary_fixup_tce_spaces(void) -{ - struct pci_dev *dev = NULL; - void *tce_space; - - if (no_iommu || swiotlb || !calgary_detected) - return -ENODEV; - - printk(KERN_DEBUG "Calgary: fixing up tce spaces\n"); - - do { - dev = pci_get_device(PCI_VENDOR_ID_IBM, PCI_ANY_ID, dev); - if (!dev) - break; - if (!is_cal_pci_dev(dev->device)) - continue; - if (!translate_phb(dev)) - continue; - - tce_space = bus_info[dev->bus->number].tce_space; - if (!tce_space) - continue; - - calgary_fixup_one_tce_space(dev); - - } while (1); - - return 0; -} - -/* - * We need to be call after pcibios_assign_resources (fs_initcall level) - * and before device_initcall. - */ -rootfs_initcall(calgary_fixup_tce_spaces); diff --git a/arch/x86_64/kernel/pci-dma_64.c b/arch/x86_64/kernel/pci-dma_64.c deleted file mode 100644 index 29711445c81..00000000000 --- a/arch/x86_64/kernel/pci-dma_64.c +++ /dev/null @@ -1,346 +0,0 @@ -/* - * Dynamic DMA mapping support. - */ - -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/string.h> -#include <linux/pci.h> -#include <linux/module.h> -#include <asm/io.h> -#include <asm/iommu.h> -#include <asm/calgary.h> - -int iommu_merge __read_mostly = 0; -EXPORT_SYMBOL(iommu_merge); - -dma_addr_t bad_dma_address __read_mostly; -EXPORT_SYMBOL(bad_dma_address); - -/* This tells the BIO block layer to assume merging. Default to off - because we cannot guarantee merging later. */ -int iommu_bio_merge __read_mostly = 0; -EXPORT_SYMBOL(iommu_bio_merge); - -static int iommu_sac_force __read_mostly = 0; - -int no_iommu __read_mostly; -#ifdef CONFIG_IOMMU_DEBUG -int panic_on_overflow __read_mostly = 1; -int force_iommu __read_mostly = 1; -#else -int panic_on_overflow __read_mostly = 0; -int force_iommu __read_mostly= 0; -#endif - -/* Set this to 1 if there is a HW IOMMU in the system */ -int iommu_detected __read_mostly = 0; - -/* Dummy device used for NULL arguments (normally ISA). Better would - be probably a smaller DMA mask, but this is bug-to-bug compatible - to i386. */ -struct device fallback_dev = { - .bus_id = "fallback device", - .coherent_dma_mask = DMA_32BIT_MASK, - .dma_mask = &fallback_dev.coherent_dma_mask, -}; - -/* Allocate DMA memory on node near device */ -noinline static void * -dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order) -{ - struct page *page; - int node; -#ifdef CONFIG_PCI - if (dev->bus == &pci_bus_type) - node = pcibus_to_node(to_pci_dev(dev)->bus); - else -#endif - node = numa_node_id(); - - if (node < first_node(node_online_map)) - node = first_node(node_online_map); - - page = alloc_pages_node(node, gfp, order); - return page ? page_address(page) : NULL; -} - -/* - * Allocate memory for a coherent mapping. - */ -void * -dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, - gfp_t gfp) -{ - void *memory; - unsigned long dma_mask = 0; - u64 bus; - - if (!dev) - dev = &fallback_dev; - dma_mask = dev->coherent_dma_mask; - if (dma_mask == 0) - dma_mask = DMA_32BIT_MASK; - - /* Device not DMA able */ - if (dev->dma_mask == NULL) - return NULL; - - /* Don't invoke OOM killer */ - gfp |= __GFP_NORETRY; - - /* Kludge to make it bug-to-bug compatible with i386. i386 - uses the normal dma_mask for alloc_coherent. */ - dma_mask &= *dev->dma_mask; - - /* Why <=? Even when the mask is smaller than 4GB it is often - larger than 16MB and in this case we have a chance of - finding fitting memory in the next higher zone first. If - not retry with true GFP_DMA. -AK */ - if (dma_mask <= DMA_32BIT_MASK) - gfp |= GFP_DMA32; - - again: - memory = dma_alloc_pages(dev, gfp, get_order(size)); - if (memory == NULL) - return NULL; - - { - int high, mmu; - bus = virt_to_bus(memory); - high = (bus + size) >= dma_mask; - mmu = high; - if (force_iommu && !(gfp & GFP_DMA)) - mmu = 1; - else if (high) { - free_pages((unsigned long)memory, - get_order(size)); - - /* Don't use the 16MB ZONE_DMA unless absolutely - needed. It's better to use remapping first. */ - if (dma_mask < DMA_32BIT_MASK && !(gfp & GFP_DMA)) { - gfp = (gfp & ~GFP_DMA32) | GFP_DMA; - goto again; - } - - /* Let low level make its own zone decisions */ - gfp &= ~(GFP_DMA32|GFP_DMA); - - if (dma_ops->alloc_coherent) - return dma_ops->alloc_coherent(dev, size, - dma_handle, gfp); - return NULL; - } - - memset(memory, 0, size); - if (!mmu) { - *dma_handle = virt_to_bus(memory); - return memory; - } - } - - if (dma_ops->alloc_coherent) { - free_pages((unsigned long)memory, get_order(size)); - gfp &= ~(GFP_DMA|GFP_DMA32); - return dma_ops->alloc_coherent(dev, size, dma_handle, gfp); - } - - if (dma_ops->map_simple) { - *dma_handle = dma_ops->map_simple(dev, memory, - size, - PCI_DMA_BIDIRECTIONAL); - if (*dma_handle != bad_dma_address) - return memory; - } - - if (panic_on_overflow) - panic("dma_alloc_coherent: IOMMU overflow by %lu bytes\n",size); - free_pages((unsigned long)memory, get_order(size)); - return NULL; -} -EXPORT_SYMBOL(dma_alloc_coherent); - -/* - * Unmap coherent memory. - * The caller must ensure that the device has finished accessing the mapping. - */ -void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t bus) -{ - if (dma_ops->unmap_single) - dma_ops->unmap_single(dev, bus, size, 0); - free_pages((unsigned long)vaddr, get_order(size)); -} -EXPORT_SYMBOL(dma_free_coherent); - -static int forbid_dac __read_mostly; - -int dma_supported(struct device *dev, u64 mask) -{ -#ifdef CONFIG_PCI - if (mask > 0xffffffff && forbid_dac > 0) { - - - - printk(KERN_INFO "PCI: Disallowing DAC for device %s\n", dev->bus_id); - return 0; - } -#endif - - if (dma_ops->dma_supported) - return dma_ops->dma_supported(dev, mask); - - /* Copied from i386. Doesn't make much sense, because it will - only work for pci_alloc_coherent. - The caller just has to use GFP_DMA in this case. */ - if (mask < DMA_24BIT_MASK) - return 0; - - /* Tell the device to use SAC when IOMMU force is on. This - allows the driver to use cheaper accesses in some cases. - - Problem with this is that if we overflow the IOMMU area and - return DAC as fallback address the device may not handle it - correctly. - - As a special case some controllers have a 39bit address - mode that is as efficient as 32bit (aic79xx). Don't force - SAC for these. Assume all masks <= 40 bits are of this - type. Normally this doesn't make any difference, but gives - more gentle handling of IOMMU overflow. */ - if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) { - printk(KERN_INFO "%s: Force SAC with mask %Lx\n", dev->bus_id,mask); - return 0; - } - - return 1; -} -EXPORT_SYMBOL(dma_supported); - -int dma_set_mask(struct device *dev, u64 mask) -{ - if (!dev->dma_mask || !dma_supported(dev, mask)) - return -EIO; - *dev->dma_mask = mask; - return 0; -} -EXPORT_SYMBOL(dma_set_mask); - -/* - * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter - * documentation. - */ -__init int iommu_setup(char *p) -{ - iommu_merge = 1; - - if (!p) - return -EINVAL; - - while (*p) { - if (!strncmp(p,"off",3)) - no_iommu = 1; - /* gart_parse_options has more force support */ - if (!strncmp(p,"force",5)) - force_iommu = 1; - if (!strncmp(p,"noforce",7)) { - iommu_merge = 0; - force_iommu = 0; - } - - if (!strncmp(p, "biomerge",8)) { - iommu_bio_merge = 4096; - iommu_merge = 1; - force_iommu = 1; - } - if (!strncmp(p, "panic",5)) - panic_on_overflow = 1; - if (!strncmp(p, "nopanic",7)) - panic_on_overflow = 0; - if (!strncmp(p, "merge",5)) { - iommu_merge = 1; - force_iommu = 1; - } - if (!strncmp(p, "nomerge",7)) - iommu_merge = 0; - if (!strncmp(p, "forcesac",8)) - iommu_sac_force = 1; - if (!strncmp(p, "allowdac", 8)) - forbid_dac = 0; - if (!strncmp(p, "nodac", 5)) - forbid_dac = -1; - -#ifdef CONFIG_SWIOTLB - if (!strncmp(p, "soft",4)) - swiotlb = 1; -#endif - -#ifdef CONFIG_IOMMU - gart_parse_options(p); -#endif - -#ifdef CONFIG_CALGARY_IOMMU - if (!strncmp(p, "calgary", 7)) - use_calgary = 1; -#endif /* CONFIG_CALGARY_IOMMU */ - - p += strcspn(p, ","); - if (*p == ',') - ++p; - } - return 0; -} -early_param("iommu", iommu_setup); - -void __init pci_iommu_alloc(void) -{ - /* - * The order of these functions is important for - * fall-back/fail-over reasons - */ -#ifdef CONFIG_IOMMU - iommu_hole_init(); -#endif - -#ifdef CONFIG_CALGARY_IOMMU - detect_calgary(); -#endif - -#ifdef CONFIG_SWIOTLB - pci_swiotlb_init(); -#endif -} - -static int __init pci_iommu_init(void) -{ -#ifdef CONFIG_CALGARY_IOMMU - calgary_iommu_init(); -#endif - -#ifdef CONFIG_IOMMU - gart_iommu_init(); -#endif - - no_iommu_init(); - return 0; -} - -void pci_iommu_shutdown(void) -{ - gart_iommu_shutdown(); -} - -#ifdef CONFIG_PCI -/* Many VIA bridges seem to corrupt data for DAC. Disable it here */ - -static __devinit void via_no_dac(struct pci_dev *dev) -{ - if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) { - printk(KERN_INFO "PCI: VIA PCI bridge detected. Disabling DAC.\n"); - forbid_dac = 1; - } -} -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac); -#endif -/* Must execute after PCI subsystem */ -fs_initcall(pci_iommu_init); diff --git a/arch/x86_64/kernel/pci-gart_64.c b/arch/x86_64/kernel/pci-gart_64.c deleted file mode 100644 index 4918c575d58..00000000000 --- a/arch/x86_64/kernel/pci-gart_64.c +++ /dev/null @@ -1,740 +0,0 @@ -/* - * Dynamic DMA mapping support for AMD Hammer. - * - * Use the integrated AGP GART in the Hammer northbridge as an IOMMU for PCI. - * This allows to use PCI devices that only support 32bit addresses on systems - * with more than 4GB. - * - * See Documentation/DMA-mapping.txt for the interface specification. - * - * Copyright 2002 Andi Kleen, SuSE Labs. - */ - -#include <linux/types.h> -#include <linux/ctype.h> -#include <linux/agp_backend.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/string.h> -#include <linux/spinlock.h> -#include <linux/pci.h> -#include <linux/module.h> -#include <linux/topology.h> -#include <linux/interrupt.h> -#include <linux/bitops.h> -#include <linux/kdebug.h> -#include <asm/atomic.h> -#include <asm/io.h> -#include <asm/mtrr.h> -#include <asm/pgtable.h> -#include <asm/proto.h> -#include <asm/iommu.h> -#include <asm/cacheflush.h> -#include <asm/swiotlb.h> -#include <asm/dma.h> -#include <asm/k8.h> - -unsigned long iommu_bus_base; /* GART remapping area (physical) */ -static unsigned long iommu_size; /* size of remapping area bytes */ -static unsigned long iommu_pages; /* .. and in pages */ - -u32 *iommu_gatt_base; /* Remapping table */ - -/* If this is disabled the IOMMU will use an optimized flushing strategy - of only flushing when an mapping is reused. With it true the GART is flushed - for every mapping. Problem is that doing the lazy flush seems to trigger - bugs with some popular PCI cards, in particular 3ware (but has been also - also seen with Qlogic at least). */ -int iommu_fullflush = 1; - -/* Allocation bitmap for the remapping area */ -static DEFINE_SPINLOCK(iommu_bitmap_lock); -static unsigned long *iommu_gart_bitmap; /* guarded by iommu_bitmap_lock */ - -static u32 gart_unmapped_entry; - -#define GPTE_VALID 1 -#define GPTE_COHERENT 2 -#define GPTE_ENCODE(x) \ - (((x) & 0xfffff000) | (((x) >> 32) << 4) | GPTE_VALID | GPTE_COHERENT) -#define GPTE_DECODE(x) (((x) & 0xfffff000) | (((u64)(x) & 0xff0) << 28)) - -#define to_pages(addr,size) \ - (round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT) - -#define EMERGENCY_PAGES 32 /* = 128KB */ - -#ifdef CONFIG_AGP -#define AGPEXTERN extern -#else -#define AGPEXTERN -#endif - -/* backdoor interface to AGP driver */ -AGPEXTERN int agp_memory_reserved; -AGPEXTERN __u32 *agp_gatt_table; - -static unsigned long next_bit; /* protected by iommu_bitmap_lock */ -static int need_flush; /* global flush state. set for each gart wrap */ - -static unsigned long alloc_iommu(int size) -{ - unsigned long offset, flags; - - spin_lock_irqsave(&iommu_bitmap_lock, flags); - offset = find_next_zero_string(iommu_gart_bitmap,next_bit,iommu_pages,size); - if (offset == -1) { - need_flush = 1; - offset = find_next_zero_string(iommu_gart_bitmap,0,iommu_pages,size); - } - if (offset != -1) { - set_bit_string(iommu_gart_bitmap, offset, size); - next_bit = offset+size; - if (next_bit >= iommu_pages) { - next_bit = 0; - need_flush = 1; - } - } - if (iommu_fullflush) - need_flush = 1; - spin_unlock_irqrestore(&iommu_bitmap_lock, flags); - return offset; -} - -static void free_iommu(unsigned long offset, int size) -{ - unsigned long flags; - spin_lock_irqsave(&iommu_bitmap_lock, flags); - __clear_bit_string(iommu_gart_bitmap, offset, size); - spin_unlock_irqrestore(&iommu_bitmap_lock, flags); -} - -/* - * Use global flush state to avoid races with multiple flushers. - */ -static void flush_gart(void) -{ - unsigned long flags; - spin_lock_irqsave(&iommu_bitmap_lock, flags); - if (need_flush) { - k8_flush_garts(); - need_flush = 0; - } - spin_unlock_irqrestore(&iommu_bitmap_lock, flags); -} - -#ifdef CONFIG_IOMMU_LEAK - -#define SET_LEAK(x) if (iommu_leak_tab) \ - iommu_leak_tab[x] = __builtin_return_address(0); -#define CLEAR_LEAK(x) if (iommu_leak_tab) \ - iommu_leak_tab[x] = NULL; - -/* Debugging aid for drivers that don't free their IOMMU tables */ -static void **iommu_leak_tab; -static int leak_trace; -int iommu_leak_pages = 20; -void dump_leak(void) -{ - int i; - static int dump; - if (dump || !iommu_leak_tab) return; - dump = 1; - show_stack(NULL,NULL); - /* Very crude. dump some from the end of the table too */ - printk("Dumping %d pages from end of IOMMU:\n", iommu_leak_pages); - for (i = 0; i < iommu_leak_pages; i+=2) { - printk("%lu: ", iommu_pages-i); - printk_address((unsigned long) iommu_leak_tab[iommu_pages-i]); - printk("%c", (i+1)%2 == 0 ? '\n' : ' '); - } - printk("\n"); -} -#else -#define SET_LEAK(x) -#define CLEAR_LEAK(x) -#endif - -static void iommu_full(struct device *dev, size_t size, int dir) -{ - /* - * Ran out of IOMMU space for this operation. This is very bad. - * Unfortunately the drivers cannot handle this operation properly. - * Return some non mapped prereserved space in the aperture and - * let the Northbridge deal with it. This will result in garbage - * in the IO operation. When the size exceeds the prereserved space - * memory corruption will occur or random memory will be DMAed - * out. Hopefully no network devices use single mappings that big. - */ - - printk(KERN_ERR - "PCI-DMA: Out of IOMMU space for %lu bytes at device %s\n", - size, dev->bus_id); - - if (size > PAGE_SIZE*EMERGENCY_PAGES) { - if (dir == PCI_DMA_FROMDEVICE || dir == PCI_DMA_BIDIRECTIONAL) - panic("PCI-DMA: Memory would be corrupted\n"); - if (dir == PCI_DMA_TODEVICE || dir == PCI_DMA_BIDIRECTIONAL) - panic(KERN_ERR "PCI-DMA: Random memory would be DMAed\n"); - } - -#ifdef CONFIG_IOMMU_LEAK - dump_leak(); -#endif -} - -static inline int need_iommu(struct device *dev, unsigned long addr, size_t size) -{ - u64 mask = *dev->dma_mask; - int high = addr + size > mask; - int mmu = high; - if (force_iommu) - mmu = 1; - return mmu; -} - -static inline int nonforced_iommu(struct device *dev, unsigned long addr, size_t size) -{ - u64 mask = *dev->dma_mask; - int high = addr + size > mask; - int mmu = high; - return mmu; -} - -/* Map a single continuous physical area into the IOMMU. - * Caller needs to check if the iommu is needed and flush. - */ -static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem, - size_t size, int dir) -{ - unsigned long npages = to_pages(phys_mem, size); - unsigned long iommu_page = alloc_iommu(npages); - int i; - if (iommu_page == -1) { - if (!nonforced_iommu(dev, phys_mem, size)) - return phys_mem; - if (panic_on_overflow) - panic("dma_map_area overflow %lu bytes\n", size); - iommu_full(dev, size, dir); - return bad_dma_address; - } - - for (i = 0; i < npages; i++) { - iommu_gatt_base[iommu_page + i] = GPTE_ENCODE(phys_mem); - SET_LEAK(iommu_page + i); - phys_mem += PAGE_SIZE; - } - return iommu_bus_base + iommu_page*PAGE_SIZE + (phys_mem & ~PAGE_MASK); -} - -static dma_addr_t gart_map_simple(struct device *dev, char *buf, - size_t size, int dir) -{ - dma_addr_t map = dma_map_area(dev, virt_to_bus(buf), size, dir); - flush_gart(); - return map; -} - -/* Map a single area into the IOMMU */ -static dma_addr_t gart_map_single(struct device *dev, void *addr, size_t size, int dir) -{ - unsigned long phys_mem, bus; - - if (!dev) - dev = &fallback_dev; - - phys_mem = virt_to_phys(addr); - if (!need_iommu(dev, phys_mem, size)) - return phys_mem; - - bus = gart_map_simple(dev, addr, size, dir); - return bus; -} - -/* - * Free a DMA mapping. - */ -static void gart_unmap_single(struct device *dev, dma_addr_t dma_addr, - size_t size, int direction) -{ - unsigned long iommu_page; - int npages; - int i; - - if (dma_addr < iommu_bus_base + EMERGENCY_PAGES*PAGE_SIZE || - dma_addr >= iommu_bus_base + iommu_size) - return; - iommu_page = (dma_addr - iommu_bus_base)>>PAGE_SHIFT; - npages = to_pages(dma_addr, size); - for (i = 0; i < npages; i++) { - iommu_gatt_base[iommu_page + i] = gart_unmapped_entry; - CLEAR_LEAK(iommu_page + i); - } - free_iommu(iommu_page, npages); -} - -/* - * Wrapper for pci_unmap_single working with scatterlists. - */ -static void gart_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, int dir) -{ - int i; - - for (i = 0; i < nents; i++) { - struct scatterlist *s = &sg[i]; - if (!s->dma_length || !s->length) - break; - gart_unmap_single(dev, s->dma_address, s->dma_length, dir); - } -} - -/* Fallback for dma_map_sg in case of overflow */ -static int dma_map_sg_nonforce(struct device *dev, struct scatterlist *sg, - int nents, int dir) -{ - int i; - -#ifdef CONFIG_IOMMU_DEBUG - printk(KERN_DEBUG "dma_map_sg overflow\n"); -#endif - - for (i = 0; i < nents; i++ ) { - struct scatterlist *s = &sg[i]; - unsigned long addr = page_to_phys(s->page) + s->offset; - if (nonforced_iommu(dev, addr, s->length)) { - addr = dma_map_area(dev, addr, s->length, dir); - if (addr == bad_dma_address) { - if (i > 0) - gart_unmap_sg(dev, sg, i, dir); - nents = 0; - sg[0].dma_length = 0; - break; - } - } - s->dma_address = addr; - s->dma_length = s->length; - } - flush_gart(); - return nents; -} - -/* Map multiple scatterlist entries continuous into the first. */ -static int __dma_map_cont(struct scatterlist *sg, int start, int stopat, - struct scatterlist *sout, unsigned long pages) -{ - unsigned long iommu_start = alloc_iommu(pages); - unsigned long iommu_page = iommu_start; - int i; - - if (iommu_start == -1) - return -1; - - for (i = start; i < stopat; i++) { - struct scatterlist *s = &sg[i]; - unsigned long pages, addr; - unsigned long phys_addr = s->dma_address; - - BUG_ON(i > start && s->offset); - if (i == start) { - *sout = *s; - sout->dma_address = iommu_bus_base; - sout->dma_address += iommu_page*PAGE_SIZE + s->offset; - sout->dma_length = s->length; - } else { - sout->dma_length += s->length; - } - - addr = phys_addr; - pages = to_pages(s->offset, s->length); - while (pages--) { - iommu_gatt_base[iommu_page] = GPTE_ENCODE(addr); - SET_LEAK(iommu_page); - addr += PAGE_SIZE; - iommu_page++; - } - } - BUG_ON(iommu_page - iommu_start != pages); - return 0; -} - -static inline int dma_map_cont(struct scatterlist *sg, int start, int stopat, - struct scatterlist *sout, - unsigned long pages, int need) -{ - if (!need) { - BUG_ON(stopat - start != 1); - *sout = sg[start]; - sout->dma_length = sg[start].length; - return 0; - } - return __dma_map_cont(sg, start, stopat, sout, pages); -} - -/* - * DMA map all entries in a scatterlist. - * Merge chunks that have page aligned sizes into a continuous mapping. - */ -int gart_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dir) -{ - int i; - int out; - int start; - unsigned long pages = 0; - int need = 0, nextneed; - - if (nents == 0) - return 0; - - if (!dev) - dev = &fallback_dev; - - out = 0; - start = 0; - for (i = 0; i < nents; i++) { - struct scatterlist *s = &sg[i]; - dma_addr_t addr = page_to_phys(s->page) + s->offset; - s->dma_address = addr; - BUG_ON(s->length == 0); - - nextneed = need_iommu(dev, addr, s->length); - - /* Handle the previous not yet processed entries */ - if (i > start) { - struct scatterlist *ps = &sg[i-1]; - /* Can only merge when the last chunk ends on a page - boundary and the new one doesn't have an offset. */ - if (!iommu_merge || !nextneed || !need || s->offset || - (ps->offset + ps->length) % PAGE_SIZE) { - if (dma_map_cont(sg, start, i, sg+out, pages, - need) < 0) - goto error; - out++; - pages = 0; - start = i; - } - } - - need = nextneed; - pages += to_pages(s->offset, s->length); - } - if (dma_map_cont(sg, start, i, sg+out, pages, need) < 0) - goto error; - out++; - flush_gart(); - if (out < nents) - sg[out].dma_length = 0; - return out; - -error: - flush_gart(); - gart_unmap_sg(dev, sg, nents, dir); - /* When it was forced or merged try again in a dumb way */ - if (force_iommu || iommu_merge) { - out = dma_map_sg_nonforce(dev, sg, nents, dir); - if (out > 0) - return out; - } - if (panic_on_overflow) - panic("dma_map_sg: overflow on %lu pages\n", pages); - iommu_full(dev, pages << PAGE_SHIFT, dir); - for (i = 0; i < nents; i++) - sg[i].dma_address = bad_dma_address; - return 0; -} - -static int no_agp; - -static __init unsigned long check_iommu_size(unsigned long aper, u64 aper_size) -{ - unsigned long a; - if (!iommu_size) { - iommu_size = aper_size; - if (!no_agp) - iommu_size /= 2; - } - - a = aper + iommu_size; - iommu_size -= round_up(a, LARGE_PAGE_SIZE) - a; - - if (iommu_size < 64*1024*1024) - printk(KERN_WARNING - "PCI-DMA: Warning: Small IOMMU %luMB. Consider increasing the AGP aperture in BIOS\n",iommu_size>>20); - - return iommu_size; -} - -static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) -{ - unsigned aper_size = 0, aper_base_32; - u64 aper_base; - unsigned aper_order; - - pci_read_config_dword(dev, 0x94, &aper_base_32); - pci_read_config_dword(dev, 0x90, &aper_order); - aper_order = (aper_order >> 1) & 7; - - aper_base = aper_base_32 & 0x7fff; - aper_base <<= 25; - - aper_size = (32 * 1024 * 1024) << aper_order; - if (aper_base + aper_size > 0x100000000UL || !aper_size) - aper_base = 0; - - *size = aper_size; - return aper_base; -} - -/* - * Private Northbridge GATT initialization in case we cannot use the - * AGP driver for some reason. - */ -static __init int init_k8_gatt(struct agp_kern_info *info) -{ - struct pci_dev *dev; - void *gatt; - unsigned aper_base, new_aper_base; - unsigned aper_size, gatt_size, new_aper_size; - int i; - - printk(KERN_INFO "PCI-DMA: Disabling AGP.\n"); - aper_size = aper_base = info->aper_size = 0; - dev = NULL; - for (i = 0; i < num_k8_northbridges; i++) { - dev = k8_northbridges[i]; - new_aper_base = read_aperture(dev, &new_aper_size); - if (!new_aper_base) - goto nommu; - - if (!aper_base) { - aper_size = new_aper_size; - aper_base = new_aper_base; - } - if (aper_size != new_aper_size || aper_base != new_aper_base) - goto nommu; - } - if (!aper_base) - goto nommu; - info->aper_base = aper_base; - info->aper_size = aper_size>>20; - - gatt_size = (aper_size >> PAGE_SHIFT) * sizeof(u32); - gatt = (void *)__get_free_pages(GFP_KERNEL, get_order(gatt_size)); - if (!gatt) - panic("Cannot allocate GATT table"); - if (change_page_attr_addr((unsigned long)gatt, gatt_size >> PAGE_SHIFT, PAGE_KERNEL_NOCACHE)) - panic("Could not set GART PTEs to uncacheable pages"); - global_flush_tlb(); - - memset(gatt, 0, gatt_size); - agp_gatt_table = gatt; - - for (i = 0; i < num_k8_northbridges; i++) { - u32 ctl; - u32 gatt_reg; - - dev = k8_northbridges[i]; - gatt_reg = __pa(gatt) >> 12; - gatt_reg <<= 4; - pci_write_config_dword(dev, 0x98, gatt_reg); - pci_read_config_dword(dev, 0x90, &ctl); - - ctl |= 1; - ctl &= ~((1<<4) | (1<<5)); - - pci_write_config_dword(dev, 0x90, ctl); - } - flush_gart(); - - printk("PCI-DMA: aperture base @ %x size %u KB\n",aper_base, aper_size>>10); - return 0; - - nommu: - /* Should not happen anymore */ - printk(KERN_ERR "PCI-DMA: More than 4GB of RAM and no IOMMU\n" - KERN_ERR "PCI-DMA: 32bit PCI IO may malfunction.\n"); - return -1; -} - -extern int agp_amd64_init(void); - -static const struct dma_mapping_ops gart_dma_ops = { - .mapping_error = NULL, - .map_single = gart_map_single, - .map_simple = gart_map_simple, - .unmap_single = gart_unmap_single, - .sync_single_for_cpu = NULL, - .sync_single_for_device = NULL, - .sync_single_range_for_cpu = NULL, - .sync_single_range_for_device = NULL, - .sync_sg_for_cpu = NULL, - .sync_sg_for_device = NULL, - .map_sg = gart_map_sg, - .unmap_sg = gart_unmap_sg, -}; - -void gart_iommu_shutdown(void) -{ - struct pci_dev *dev; - int i; - - if (no_agp && (dma_ops != &gart_dma_ops)) - return; - - for (i = 0; i < num_k8_northbridges; i++) { - u32 ctl; - - dev = k8_northbridges[i]; - pci_read_config_dword(dev, 0x90, &ctl); - - ctl &= ~1; - - pci_write_config_dword(dev, 0x90, ctl); - } -} - -void __init gart_iommu_init(void) -{ - struct agp_kern_info info; - unsigned long aper_size; - unsigned long iommu_start; - unsigned long scratch; - long i; - - if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0) { - printk(KERN_INFO "PCI-GART: No AMD northbridge found.\n"); - return; - } - -#ifndef CONFIG_AGP_AMD64 - no_agp = 1; -#else - /* Makefile puts PCI initialization via subsys_initcall first. */ - /* Add other K8 AGP bridge drivers here */ - no_agp = no_agp || - (agp_amd64_init() < 0) || - (agp_copy_info(agp_bridge, &info) < 0); -#endif - - if (swiotlb) - return; - - /* Did we detect a different HW IOMMU? */ - if (iommu_detected && !iommu_aperture) - return; - - if (no_iommu || - (!force_iommu && end_pfn <= MAX_DMA32_PFN) || - !iommu_aperture || - (no_agp && init_k8_gatt(&info) < 0)) { - if (end_pfn > MAX_DMA32_PFN) { - printk(KERN_ERR "WARNING more than 4GB of memory " - "but GART IOMMU not available.\n" - KERN_ERR "WARNING 32bit PCI may malfunction.\n"); - } - return; - } - - printk(KERN_INFO "PCI-DMA: using GART IOMMU.\n"); - aper_size = info.aper_size * 1024 * 1024; - iommu_size = check_iommu_size(info.aper_base, aper_size); - iommu_pages = iommu_size >> PAGE_SHIFT; - - iommu_gart_bitmap = (void*)__get_free_pages(GFP_KERNEL, - get_order(iommu_pages/8)); - if (!iommu_gart_bitmap) - panic("Cannot allocate iommu bitmap\n"); - memset(iommu_gart_bitmap, 0, iommu_pages/8); - -#ifdef CONFIG_IOMMU_LEAK - if (leak_trace) { - iommu_leak_tab = (void *)__get_free_pages(GFP_KERNEL, - get_order(iommu_pages*sizeof(void *))); - if (iommu_leak_tab) - memset(iommu_leak_tab, 0, iommu_pages * 8); - else - printk("PCI-DMA: Cannot allocate leak trace area\n"); - } -#endif - - /* - * Out of IOMMU space handling. - * Reserve some invalid pages at the beginning of the GART. - */ - set_bit_string(iommu_gart_bitmap, 0, EMERGENCY_PAGES); - - agp_memory_reserved = iommu_size; - printk(KERN_INFO - "PCI-DMA: Reserving %luMB of IOMMU area in the AGP aperture\n", - iommu_size>>20); - - iommu_start = aper_size - iommu_size; - iommu_bus_base = info.aper_base + iommu_start; - bad_dma_address = iommu_bus_base; - iommu_gatt_base = agp_gatt_table + (iommu_start>>PAGE_SHIFT); - - /* - * Unmap the IOMMU part of the GART. The alias of the page is - * always mapped with cache enabled and there is no full cache - * coherency across the GART remapping. The unmapping avoids - * automatic prefetches from the CPU allocating cache lines in - * there. All CPU accesses are done via the direct mapping to - * the backing memory. The GART address is only used by PCI - * devices. - */ - clear_kernel_mapping((unsigned long)__va(iommu_bus_base), iommu_size); - - /* - * Try to workaround a bug (thanks to BenH) - * Set unmapped entries to a scratch page instead of 0. - * Any prefetches that hit unmapped entries won't get an bus abort - * then. - */ - scratch = get_zeroed_page(GFP_KERNEL); - if (!scratch) - panic("Cannot allocate iommu scratch page"); - gart_unmapped_entry = GPTE_ENCODE(__pa(scratch)); - for (i = EMERGENCY_PAGES; i < iommu_pages; i++) - iommu_gatt_base[i] = gart_unmapped_entry; - - flush_gart(); - dma_ops = &gart_dma_ops; -} - -void __init gart_parse_options(char *p) -{ - int arg; - -#ifdef CONFIG_IOMMU_LEAK - if (!strncmp(p,"leak",4)) { - leak_trace = 1; - p += 4; - if (*p == '=') ++p; - if (isdigit(*p) && get_option(&p, &arg)) - iommu_leak_pages = arg; - } -#endif - if (isdigit(*p) && get_option(&p, &arg)) - iommu_size = arg; - if (!strncmp(p, "fullflush",8)) - iommu_fullflush = 1; - if (!strncmp(p, "nofullflush",11)) - iommu_fullflush = 0; - if (!strncmp(p,"noagp",5)) - no_agp = 1; - if (!strncmp(p, "noaperture",10)) - fix_aperture = 0; - /* duplicated from pci-dma.c */ - if (!strncmp(p,"force",5)) - iommu_aperture_allowed = 1; - if (!strncmp(p,"allowed",7)) - iommu_aperture_allowed = 1; - if (!strncmp(p, "memaper", 7)) { - fallback_aper_force = 1; - p += 7; - if (*p == '=') { - ++p; - if (get_option(&p, &arg)) - fallback_aper_order = arg; - } - } -} diff --git a/arch/x86_64/kernel/pci-nommu_64.c b/arch/x86_64/kernel/pci-nommu_64.c deleted file mode 100644 index 2a34c6c025a..00000000000 --- a/arch/x86_64/kernel/pci-nommu_64.c +++ /dev/null @@ -1,97 +0,0 @@ -/* Fallback functions when the main IOMMU code is not compiled in. This - code is roughly equivalent to i386. */ -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/string.h> -#include <linux/dma-mapping.h> - -#include <asm/iommu.h> -#include <asm/processor.h> -#include <asm/dma.h> - -static int -check_addr(char *name, struct device *hwdev, dma_addr_t bus, size_t size) -{ - if (hwdev && bus + size > *hwdev->dma_mask) { - if (*hwdev->dma_mask >= DMA_32BIT_MASK) - printk(KERN_ERR - "nommu_%s: overflow %Lx+%zu of device mask %Lx\n", - name, (long long)bus, size, - (long long)*hwdev->dma_mask); - return 0; - } - return 1; -} - -static dma_addr_t -nommu_map_single(struct device *hwdev, void *ptr, size_t size, - int direction) -{ - dma_addr_t bus = virt_to_bus(ptr); - if (!check_addr("map_single", hwdev, bus, size)) - return bad_dma_address; - return bus; -} - -static void nommu_unmap_single(struct device *dev, dma_addr_t addr,size_t size, - int direction) -{ -} - -/* Map a set of buffers described by scatterlist in streaming - * mode for DMA. This is the scatter-gather version of the - * above pci_map_single interface. Here the scatter gather list - * elements are each tagged with the appropriate dma address - * and length. They are obtained via sg_dma_{address,length}(SG). - * - * NOTE: An implementation may be able to use a smaller number of - * DMA address/length pairs than there are SG table elements. - * (for example via virtual mapping capabilities) - * The routine returns the number of addr/length pairs actually - * used, at most nents. - * - * Device ownership issues as mentioned above for pci_map_single are - * the same here. - */ -static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg, - int nents, int direction) -{ - int i; - - for (i = 0; i < nents; i++ ) { - struct scatterlist *s = &sg[i]; - BUG_ON(!s->page); - s->dma_address = virt_to_bus(page_address(s->page) +s->offset); - if (!check_addr("map_sg", hwdev, s->dma_address, s->length)) - return 0; - s->dma_length = s->length; - } - return nents; -} - -/* Unmap a set of streaming mode DMA translations. - * Again, cpu read rules concerning calls here are the same as for - * pci_unmap_single() above. - */ -static void nommu_unmap_sg(struct device *dev, struct scatterlist *sg, - int nents, int dir) -{ -} - -const struct dma_mapping_ops nommu_dma_ops = { - .map_single = nommu_map_single, - .unmap_single = nommu_unmap_single, - .map_sg = nommu_map_sg, - .unmap_sg = nommu_unmap_sg, - .is_phys = 1, -}; - -void __init no_iommu_init(void) -{ - if (dma_ops) - return; - - force_iommu = 0; /* no HW IOMMU */ - dma_ops = &nommu_dma_ops; -} diff --git a/arch/x86_64/kernel/pci-swiotlb_64.c b/arch/x86_64/kernel/pci-swiotlb_64.c deleted file mode 100644 index b2f405ea7c8..00000000000 --- a/arch/x86_64/kernel/pci-swiotlb_64.c +++ /dev/null @@ -1,44 +0,0 @@ -/* Glue code to lib/swiotlb.c */ - -#include <linux/pci.h> -#include <linux/cache.h> -#include <linux/module.h> -#include <linux/dma-mapping.h> - -#include <asm/iommu.h> -#include <asm/swiotlb.h> -#include <asm/dma.h> - -int swiotlb __read_mostly; -EXPORT_SYMBOL(swiotlb); - -const struct dma_mapping_ops swiotlb_dma_ops = { - .mapping_error = swiotlb_dma_mapping_error, - .alloc_coherent = swiotlb_alloc_coherent, - .free_coherent = swiotlb_free_coherent, - .map_single = swiotlb_map_single, - .unmap_single = swiotlb_unmap_single, - .sync_single_for_cpu = swiotlb_sync_single_for_cpu, - .sync_single_for_device = swiotlb_sync_single_for_device, - .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, - .sync_single_range_for_device = swiotlb_sync_single_range_for_device, - .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, - .sync_sg_for_device = swiotlb_sync_sg_for_device, - .map_sg = swiotlb_map_sg, - .unmap_sg = swiotlb_unmap_sg, - .dma_supported = NULL, -}; - -void __init pci_swiotlb_init(void) -{ - /* don't initialize swiotlb if iommu=off (no_iommu=1) */ - if (!iommu_detected && !no_iommu && end_pfn > MAX_DMA32_PFN) - swiotlb = 1; - if (swiotlb_force) - swiotlb = 1; - if (swiotlb) { - printk(KERN_INFO "PCI-DMA: Using software bounce buffering for IO (SWIOTLB)\n"); - swiotlb_init(); - dma_ops = &swiotlb_dma_ops; - } -} diff --git a/arch/x86_64/kernel/pmtimer_64.c b/arch/x86_64/kernel/pmtimer_64.c deleted file mode 100644 index ae8f91214f1..00000000000 --- a/arch/x86_64/kernel/pmtimer_64.c +++ /dev/null @@ -1,69 +0,0 @@ -/* Ported over from i386 by AK, original copyright was: - * - * (C) Dominik Brodowski <linux@brodo.de> 2003 - * - * Driver to use the Power Management Timer (PMTMR) available in some - * southbridges as primary timing source for the Linux kernel. - * - * Based on parts of linux/drivers/acpi/hardware/hwtimer.c, timer_pit.c, - * timer_hpet.c, and on Arjan van de Ven's implementation for 2.4. - * - * This file is licensed under the GPL v2. - * - * Dropped all the hardware bug workarounds for now. Hopefully they - * are not needed on 64bit chipsets. - */ - -#include <linux/jiffies.h> -#include <linux/kernel.h> -#include <linux/time.h> -#include <linux/init.h> -#include <linux/cpumask.h> -#include <asm/io.h> -#include <asm/proto.h> -#include <asm/msr.h> -#include <asm/vsyscall.h> - -#define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */ - -static inline u32 cyc2us(u32 cycles) -{ - /* The Power Management Timer ticks at 3.579545 ticks per microsecond. - * 1 / PM_TIMER_FREQUENCY == 0.27936511 =~ 286/1024 [error: 0.024%] - * - * Even with HZ = 100, delta is at maximum 35796 ticks, so it can - * easily be multiplied with 286 (=0x11E) without having to fear - * u32 overflows. - */ - cycles *= 286; - return (cycles >> 10); -} - -static unsigned pmtimer_wait_tick(void) -{ - u32 a, b; - for (a = b = inl(pmtmr_ioport) & ACPI_PM_MASK; - a == b; - b = inl(pmtmr_ioport) & ACPI_PM_MASK) - cpu_relax(); - return b; -} - -/* note: wait time is rounded up to one tick */ -void pmtimer_wait(unsigned us) -{ - u32 a, b; - a = pmtimer_wait_tick(); - do { - b = inl(pmtmr_ioport); - cpu_relax(); - } while (cyc2us(b - a) < us); -} - -static int __init nopmtimer_setup(char *s) -{ - pmtmr_ioport = 0; - return 1; -} - -__setup("nopmtimer", nopmtimer_setup); diff --git a/arch/x86_64/kernel/process_64.c b/arch/x86_64/kernel/process_64.c deleted file mode 100644 index 98956555450..00000000000 --- a/arch/x86_64/kernel/process_64.c +++ /dev/null @@ -1,903 +0,0 @@ -/* - * linux/arch/x86-64/kernel/process.c - * - * Copyright (C) 1995 Linus Torvalds - * - * Pentium III FXSR, SSE support - * Gareth Hughes <gareth@valinux.com>, May 2000 - * - * X86-64 port - * Andi Kleen. - * - * CPU hotplug support - ashok.raj@intel.com - */ - -/* - * This file handles the architecture-dependent parts of process handling.. - */ - -#include <stdarg.h> - -#include <linux/cpu.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/fs.h> -#include <linux/elfcore.h> -#include <linux/smp.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/module.h> -#include <linux/a.out.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/ptrace.h> -#include <linux/utsname.h> -#include <linux/random.h> -#include <linux/notifier.h> -#include <linux/kprobes.h> -#include <linux/kdebug.h> - -#include <asm/uaccess.h> -#include <asm/pgtable.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/processor.h> -#include <asm/i387.h> -#include <asm/mmu_context.h> -#include <asm/pda.h> -#include <asm/prctl.h> -#include <asm/desc.h> -#include <asm/proto.h> -#include <asm/ia32.h> -#include <asm/idle.h> - -asmlinkage extern void ret_from_fork(void); - -unsigned long kernel_thread_flags = CLONE_VM | CLONE_UNTRACED; - -unsigned long boot_option_idle_override = 0; -EXPORT_SYMBOL(boot_option_idle_override); - -/* - * Powermanagement idle function, if any.. - */ -void (*pm_idle)(void); -EXPORT_SYMBOL(pm_idle); -static DEFINE_PER_CPU(unsigned int, cpu_idle_state); - -static ATOMIC_NOTIFIER_HEAD(idle_notifier); - -void idle_notifier_register(struct notifier_block *n) -{ - atomic_notifier_chain_register(&idle_notifier, n); -} -EXPORT_SYMBOL_GPL(idle_notifier_register); - -void idle_notifier_unregister(struct notifier_block *n) -{ - atomic_notifier_chain_unregister(&idle_notifier, n); -} -EXPORT_SYMBOL(idle_notifier_unregister); - -void enter_idle(void) -{ - write_pda(isidle, 1); - atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL); -} - -static void __exit_idle(void) -{ - if (test_and_clear_bit_pda(0, isidle) == 0) - return; - atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL); -} - -/* Called from interrupts to signify idle end */ -void exit_idle(void) -{ - /* idle loop has pid 0 */ - if (current->pid) - return; - __exit_idle(); -} - -/* - * We use this if we don't have any better - * idle routine.. - */ -static void default_idle(void) -{ - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); - local_irq_disable(); - if (!need_resched()) { - /* Enables interrupts one instruction before HLT. - x86 special cases this so there is no race. */ - safe_halt(); - } else - local_irq_enable(); - current_thread_info()->status |= TS_POLLING; -} - -/* - * On SMP it's slightly faster (but much more power-consuming!) - * to poll the ->need_resched flag instead of waiting for the - * cross-CPU IPI to arrive. Use this option with caution. - */ -static void poll_idle (void) -{ - local_irq_enable(); - cpu_relax(); -} - -void cpu_idle_wait(void) -{ - unsigned int cpu, this_cpu = get_cpu(); - cpumask_t map, tmp = current->cpus_allowed; - - set_cpus_allowed(current, cpumask_of_cpu(this_cpu)); - put_cpu(); - - cpus_clear(map); - for_each_online_cpu(cpu) { - per_cpu(cpu_idle_state, cpu) = 1; - cpu_set(cpu, map); - } - - __get_cpu_var(cpu_idle_state) = 0; - - wmb(); - do { - ssleep(1); - for_each_online_cpu(cpu) { - if (cpu_isset(cpu, map) && - !per_cpu(cpu_idle_state, cpu)) - cpu_clear(cpu, map); - } - cpus_and(map, map, cpu_online_map); - } while (!cpus_empty(map)); - - set_cpus_allowed(current, tmp); -} -EXPORT_SYMBOL_GPL(cpu_idle_wait); - -#ifdef CONFIG_HOTPLUG_CPU -DECLARE_PER_CPU(int, cpu_state); - -#include <asm/nmi.h> -/* We halt the CPU with physical CPU hotplug */ -static inline void play_dead(void) -{ - idle_task_exit(); - wbinvd(); - mb(); - /* Ack it */ - __get_cpu_var(cpu_state) = CPU_DEAD; - - local_irq_disable(); - while (1) - halt(); -} -#else -static inline void play_dead(void) -{ - BUG(); -} -#endif /* CONFIG_HOTPLUG_CPU */ - -/* - * The idle thread. There's no useful work to be - * done, so just try to conserve power and have a - * low exit latency (ie sit in a loop waiting for - * somebody to say that they'd like to reschedule) - */ -void cpu_idle (void) -{ - current_thread_info()->status |= TS_POLLING; - /* endless idle loop with no priority at all */ - while (1) { - while (!need_resched()) { - void (*idle)(void); - - if (__get_cpu_var(cpu_idle_state)) - __get_cpu_var(cpu_idle_state) = 0; - - rmb(); - idle = pm_idle; - if (!idle) - idle = default_idle; - if (cpu_is_offline(smp_processor_id())) - play_dead(); - /* - * Idle routines should keep interrupts disabled - * from here on, until they go to idle. - * Otherwise, idle callbacks can misfire. - */ - local_irq_disable(); - enter_idle(); - idle(); - /* In many cases the interrupt that ended idle - has already called exit_idle. But some idle - loops can be woken up without interrupt. */ - __exit_idle(); - } - - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - } -} - -/* - * This uses new MONITOR/MWAIT instructions on P4 processors with PNI, - * which can obviate IPI to trigger checking of need_resched. - * We execute MONITOR against need_resched and enter optimized wait state - * through MWAIT. Whenever someone changes need_resched, we would be woken - * up from MWAIT (without an IPI). - * - * New with Core Duo processors, MWAIT can take some hints based on CPU - * capability. - */ -void mwait_idle_with_hints(unsigned long eax, unsigned long ecx) -{ - if (!need_resched()) { - __monitor((void *)¤t_thread_info()->flags, 0, 0); - smp_mb(); - if (!need_resched()) - __mwait(eax, ecx); - } -} - -/* Default MONITOR/MWAIT with no hints, used for default C1 state */ -static void mwait_idle(void) -{ - if (!need_resched()) { - __monitor((void *)¤t_thread_info()->flags, 0, 0); - smp_mb(); - if (!need_resched()) - __sti_mwait(0, 0); - else - local_irq_enable(); - } else { - local_irq_enable(); - } -} - -void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) -{ - static int printed; - if (cpu_has(c, X86_FEATURE_MWAIT)) { - /* - * Skip, if setup has overridden idle. - * One CPU supports mwait => All CPUs supports mwait - */ - if (!pm_idle) { - if (!printed) { - printk(KERN_INFO "using mwait in idle threads.\n"); - printed = 1; - } - pm_idle = mwait_idle; - } - } -} - -static int __init idle_setup (char *str) -{ - if (!strcmp(str, "poll")) { - printk("using polling idle threads.\n"); - pm_idle = poll_idle; - } else if (!strcmp(str, "mwait")) - force_mwait = 1; - else - return -1; - - boot_option_idle_override = 1; - return 0; -} -early_param("idle", idle_setup); - -/* Prints also some state that isn't saved in the pt_regs */ -void __show_regs(struct pt_regs * regs) -{ - unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L, fs, gs, shadowgs; - unsigned long d0, d1, d2, d3, d6, d7; - unsigned int fsindex,gsindex; - unsigned int ds,cs,es; - - printk("\n"); - print_modules(); - printk("Pid: %d, comm: %.20s %s %s %.*s\n", - current->pid, current->comm, print_tainted(), - init_utsname()->release, - (int)strcspn(init_utsname()->version, " "), - init_utsname()->version); - printk("RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->rip); - printk_address(regs->rip); - printk("RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, regs->rsp, - regs->eflags); - printk("RAX: %016lx RBX: %016lx RCX: %016lx\n", - regs->rax, regs->rbx, regs->rcx); - printk("RDX: %016lx RSI: %016lx RDI: %016lx\n", - regs->rdx, regs->rsi, regs->rdi); - printk("RBP: %016lx R08: %016lx R09: %016lx\n", - regs->rbp, regs->r8, regs->r9); - printk("R10: %016lx R11: %016lx R12: %016lx\n", - regs->r10, regs->r11, regs->r12); - printk("R13: %016lx R14: %016lx R15: %016lx\n", - regs->r13, regs->r14, regs->r15); - - asm("movl %%ds,%0" : "=r" (ds)); - asm("movl %%cs,%0" : "=r" (cs)); - asm("movl %%es,%0" : "=r" (es)); - asm("movl %%fs,%0" : "=r" (fsindex)); - asm("movl %%gs,%0" : "=r" (gsindex)); - - rdmsrl(MSR_FS_BASE, fs); - rdmsrl(MSR_GS_BASE, gs); - rdmsrl(MSR_KERNEL_GS_BASE, shadowgs); - - cr0 = read_cr0(); - cr2 = read_cr2(); - cr3 = read_cr3(); - cr4 = read_cr4(); - - printk("FS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n", - fs,fsindex,gs,gsindex,shadowgs); - printk("CS: %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds, es, cr0); - printk("CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3, cr4); - - get_debugreg(d0, 0); - get_debugreg(d1, 1); - get_debugreg(d2, 2); - printk("DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2); - get_debugreg(d3, 3); - get_debugreg(d6, 6); - get_debugreg(d7, 7); - printk("DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7); -} - -void show_regs(struct pt_regs *regs) -{ - printk("CPU %d:", smp_processor_id()); - __show_regs(regs); - show_trace(NULL, regs, (void *)(regs + 1)); -} - -/* - * Free current thread data structures etc.. - */ -void exit_thread(void) -{ - struct task_struct *me = current; - struct thread_struct *t = &me->thread; - - if (me->thread.io_bitmap_ptr) { - struct tss_struct *tss = &per_cpu(init_tss, get_cpu()); - - kfree(t->io_bitmap_ptr); - t->io_bitmap_ptr = NULL; - clear_thread_flag(TIF_IO_BITMAP); - /* - * Careful, clear this in the TSS too: - */ - memset(tss->io_bitmap, 0xff, t->io_bitmap_max); - t->io_bitmap_max = 0; - put_cpu(); - } -} - -void flush_thread(void) -{ - struct task_struct *tsk = current; - - if (test_tsk_thread_flag(tsk, TIF_ABI_PENDING)) { - clear_tsk_thread_flag(tsk, TIF_ABI_PENDING); - if (test_tsk_thread_flag(tsk, TIF_IA32)) { - clear_tsk_thread_flag(tsk, TIF_IA32); - } else { - set_tsk_thread_flag(tsk, TIF_IA32); - current_thread_info()->status |= TS_COMPAT; - } - } - clear_tsk_thread_flag(tsk, TIF_DEBUG); - - tsk->thread.debugreg0 = 0; - tsk->thread.debugreg1 = 0; - tsk->thread.debugreg2 = 0; - tsk->thread.debugreg3 = 0; - tsk->thread.debugreg6 = 0; - tsk->thread.debugreg7 = 0; - memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array)); - /* - * Forget coprocessor state.. - */ - clear_fpu(tsk); - clear_used_math(); -} - -void release_thread(struct task_struct *dead_task) -{ - if (dead_task->mm) { - if (dead_task->mm->context.size) { - printk("WARNING: dead process %8s still has LDT? <%p/%d>\n", - dead_task->comm, - dead_task->mm->context.ldt, - dead_task->mm->context.size); - BUG(); - } - } -} - -static inline void set_32bit_tls(struct task_struct *t, int tls, u32 addr) -{ - struct user_desc ud = { - .base_addr = addr, - .limit = 0xfffff, - .seg_32bit = 1, - .limit_in_pages = 1, - .useable = 1, - }; - struct n_desc_struct *desc = (void *)t->thread.tls_array; - desc += tls; - desc->a = LDT_entry_a(&ud); - desc->b = LDT_entry_b(&ud); -} - -static inline u32 read_32bit_tls(struct task_struct *t, int tls) -{ - struct desc_struct *desc = (void *)t->thread.tls_array; - desc += tls; - return desc->base0 | - (((u32)desc->base1) << 16) | - (((u32)desc->base2) << 24); -} - -/* - * This gets called before we allocate a new thread and copy - * the current task into it. - */ -void prepare_to_copy(struct task_struct *tsk) -{ - unlazy_fpu(tsk); -} - -int copy_thread(int nr, unsigned long clone_flags, unsigned long rsp, - unsigned long unused, - struct task_struct * p, struct pt_regs * regs) -{ - int err; - struct pt_regs * childregs; - struct task_struct *me = current; - - childregs = ((struct pt_regs *) - (THREAD_SIZE + task_stack_page(p))) - 1; - *childregs = *regs; - - childregs->rax = 0; - childregs->rsp = rsp; - if (rsp == ~0UL) - childregs->rsp = (unsigned long)childregs; - - p->thread.rsp = (unsigned long) childregs; - p->thread.rsp0 = (unsigned long) (childregs+1); - p->thread.userrsp = me->thread.userrsp; - - set_tsk_thread_flag(p, TIF_FORK); - - p->thread.fs = me->thread.fs; - p->thread.gs = me->thread.gs; - - asm("mov %%gs,%0" : "=m" (p->thread.gsindex)); - asm("mov %%fs,%0" : "=m" (p->thread.fsindex)); - asm("mov %%es,%0" : "=m" (p->thread.es)); - asm("mov %%ds,%0" : "=m" (p->thread.ds)); - - if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) { - p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL); - if (!p->thread.io_bitmap_ptr) { - p->thread.io_bitmap_max = 0; - return -ENOMEM; - } - memcpy(p->thread.io_bitmap_ptr, me->thread.io_bitmap_ptr, - IO_BITMAP_BYTES); - set_tsk_thread_flag(p, TIF_IO_BITMAP); - } - - /* - * Set a new TLS for the child thread? - */ - if (clone_flags & CLONE_SETTLS) { -#ifdef CONFIG_IA32_EMULATION - if (test_thread_flag(TIF_IA32)) - err = ia32_child_tls(p, childregs); - else -#endif - err = do_arch_prctl(p, ARCH_SET_FS, childregs->r8); - if (err) - goto out; - } - err = 0; -out: - if (err && p->thread.io_bitmap_ptr) { - kfree(p->thread.io_bitmap_ptr); - p->thread.io_bitmap_max = 0; - } - return err; -} - -/* - * This special macro can be used to load a debugging register - */ -#define loaddebug(thread,r) set_debugreg(thread->debugreg ## r, r) - -static inline void __switch_to_xtra(struct task_struct *prev_p, - struct task_struct *next_p, - struct tss_struct *tss) -{ - struct thread_struct *prev, *next; - - prev = &prev_p->thread, - next = &next_p->thread; - - if (test_tsk_thread_flag(next_p, TIF_DEBUG)) { - loaddebug(next, 0); - loaddebug(next, 1); - loaddebug(next, 2); - loaddebug(next, 3); - /* no 4 and 5 */ - loaddebug(next, 6); - loaddebug(next, 7); - } - - if (test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) { - /* - * Copy the relevant range of the IO bitmap. - * Normally this is 128 bytes or less: - */ - memcpy(tss->io_bitmap, next->io_bitmap_ptr, - max(prev->io_bitmap_max, next->io_bitmap_max)); - } else if (test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) { - /* - * Clear any possible leftover bits: - */ - memset(tss->io_bitmap, 0xff, prev->io_bitmap_max); - } -} - -/* - * switch_to(x,y) should switch tasks from x to y. - * - * This could still be optimized: - * - fold all the options into a flag word and test it with a single test. - * - could test fs/gs bitsliced - * - * Kprobes not supported here. Set the probe on schedule instead. - */ -__kprobes struct task_struct * -__switch_to(struct task_struct *prev_p, struct task_struct *next_p) -{ - struct thread_struct *prev = &prev_p->thread, - *next = &next_p->thread; - int cpu = smp_processor_id(); - struct tss_struct *tss = &per_cpu(init_tss, cpu); - - /* we're going to use this soon, after a few expensive things */ - if (next_p->fpu_counter>5) - prefetch(&next->i387.fxsave); - - /* - * Reload esp0, LDT and the page table pointer: - */ - tss->rsp0 = next->rsp0; - - /* - * Switch DS and ES. - * This won't pick up thread selector changes, but I guess that is ok. - */ - asm volatile("mov %%es,%0" : "=m" (prev->es)); - if (unlikely(next->es | prev->es)) - loadsegment(es, next->es); - - asm volatile ("mov %%ds,%0" : "=m" (prev->ds)); - if (unlikely(next->ds | prev->ds)) - loadsegment(ds, next->ds); - - load_TLS(next, cpu); - - /* - * Switch FS and GS. - */ - { - unsigned fsindex; - asm volatile("movl %%fs,%0" : "=r" (fsindex)); - /* segment register != 0 always requires a reload. - also reload when it has changed. - when prev process used 64bit base always reload - to avoid an information leak. */ - if (unlikely(fsindex | next->fsindex | prev->fs)) { - loadsegment(fs, next->fsindex); - /* check if the user used a selector != 0 - * if yes clear 64bit base, since overloaded base - * is always mapped to the Null selector - */ - if (fsindex) - prev->fs = 0; - } - /* when next process has a 64bit base use it */ - if (next->fs) - wrmsrl(MSR_FS_BASE, next->fs); - prev->fsindex = fsindex; - } - { - unsigned gsindex; - asm volatile("movl %%gs,%0" : "=r" (gsindex)); - if (unlikely(gsindex | next->gsindex | prev->gs)) { - load_gs_index(next->gsindex); - if (gsindex) - prev->gs = 0; - } - if (next->gs) - wrmsrl(MSR_KERNEL_GS_BASE, next->gs); - prev->gsindex = gsindex; - } - - /* Must be after DS reload */ - unlazy_fpu(prev_p); - - /* - * Switch the PDA and FPU contexts. - */ - prev->userrsp = read_pda(oldrsp); - write_pda(oldrsp, next->userrsp); - write_pda(pcurrent, next_p); - - write_pda(kernelstack, - (unsigned long)task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET); -#ifdef CONFIG_CC_STACKPROTECTOR - write_pda(stack_canary, next_p->stack_canary); - /* - * Build time only check to make sure the stack_canary is at - * offset 40 in the pda; this is a gcc ABI requirement - */ - BUILD_BUG_ON(offsetof(struct x8664_pda, stack_canary) != 40); -#endif - - /* - * Now maybe reload the debug registers and handle I/O bitmaps - */ - if (unlikely((task_thread_info(next_p)->flags & _TIF_WORK_CTXSW)) - || test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) - __switch_to_xtra(prev_p, next_p, tss); - - /* If the task has used fpu the last 5 timeslices, just do a full - * restore of the math state immediately to avoid the trap; the - * chances of needing FPU soon are obviously high now - */ - if (next_p->fpu_counter>5) - math_state_restore(); - return prev_p; -} - -/* - * sys_execve() executes a new program. - */ -asmlinkage -long sys_execve(char __user *name, char __user * __user *argv, - char __user * __user *envp, struct pt_regs regs) -{ - long error; - char * filename; - - filename = getname(name); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - return error; - error = do_execve(filename, argv, envp, ®s); - if (error == 0) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; - task_unlock(current); - } - putname(filename); - return error; -} - -void set_personality_64bit(void) -{ - /* inherit personality from parent */ - - /* Make sure to be in 64bit mode */ - clear_thread_flag(TIF_IA32); - - /* TBD: overwrites user setup. Should have two bits. - But 64bit processes have always behaved this way, - so it's not too bad. The main problem is just that - 32bit childs are affected again. */ - current->personality &= ~READ_IMPLIES_EXEC; -} - -asmlinkage long sys_fork(struct pt_regs *regs) -{ - return do_fork(SIGCHLD, regs->rsp, regs, 0, NULL, NULL); -} - -asmlinkage long -sys_clone(unsigned long clone_flags, unsigned long newsp, - void __user *parent_tid, void __user *child_tid, struct pt_regs *regs) -{ - if (!newsp) - newsp = regs->rsp; - return do_fork(clone_flags, newsp, regs, 0, parent_tid, child_tid); -} - -/* - * This is trivial, and on the face of it looks like it - * could equally well be done in user mode. - * - * Not so, for quite unobvious reasons - register pressure. - * In user mode vfork() cannot have a stack frame, and if - * done by calling the "clone()" system call directly, you - * do not have enough call-clobbered registers to hold all - * the information you need. - */ -asmlinkage long sys_vfork(struct pt_regs *regs) -{ - return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->rsp, regs, 0, - NULL, NULL); -} - -unsigned long get_wchan(struct task_struct *p) -{ - unsigned long stack; - u64 fp,rip; - int count = 0; - - if (!p || p == current || p->state==TASK_RUNNING) - return 0; - stack = (unsigned long)task_stack_page(p); - if (p->thread.rsp < stack || p->thread.rsp > stack+THREAD_SIZE) - return 0; - fp = *(u64 *)(p->thread.rsp); - do { - if (fp < (unsigned long)stack || - fp > (unsigned long)stack+THREAD_SIZE) - return 0; - rip = *(u64 *)(fp+8); - if (!in_sched_functions(rip)) - return rip; - fp = *(u64 *)fp; - } while (count++ < 16); - return 0; -} - -long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) -{ - int ret = 0; - int doit = task == current; - int cpu; - - switch (code) { - case ARCH_SET_GS: - if (addr >= TASK_SIZE_OF(task)) - return -EPERM; - cpu = get_cpu(); - /* handle small bases via the GDT because that's faster to - switch. */ - if (addr <= 0xffffffff) { - set_32bit_tls(task, GS_TLS, addr); - if (doit) { - load_TLS(&task->thread, cpu); - load_gs_index(GS_TLS_SEL); - } - task->thread.gsindex = GS_TLS_SEL; - task->thread.gs = 0; - } else { - task->thread.gsindex = 0; - task->thread.gs = addr; - if (doit) { - load_gs_index(0); - ret = checking_wrmsrl(MSR_KERNEL_GS_BASE, addr); - } - } - put_cpu(); - break; - case ARCH_SET_FS: - /* Not strictly needed for fs, but do it for symmetry - with gs */ - if (addr >= TASK_SIZE_OF(task)) - return -EPERM; - cpu = get_cpu(); - /* handle small bases via the GDT because that's faster to - switch. */ - if (addr <= 0xffffffff) { - set_32bit_tls(task, FS_TLS, addr); - if (doit) { - load_TLS(&task->thread, cpu); - asm volatile("movl %0,%%fs" :: "r"(FS_TLS_SEL)); - } - task->thread.fsindex = FS_TLS_SEL; - task->thread.fs = 0; - } else { - task->thread.fsindex = 0; - task->thread.fs = addr; - if (doit) { - /* set the selector to 0 to not confuse - __switch_to */ - asm volatile("movl %0,%%fs" :: "r" (0)); - ret = checking_wrmsrl(MSR_FS_BASE, addr); - } - } - put_cpu(); - break; - case ARCH_GET_FS: { - unsigned long base; - if (task->thread.fsindex == FS_TLS_SEL) - base = read_32bit_tls(task, FS_TLS); - else if (doit) - rdmsrl(MSR_FS_BASE, base); - else - base = task->thread.fs; - ret = put_user(base, (unsigned long __user *)addr); - break; - } - case ARCH_GET_GS: { - unsigned long base; - unsigned gsindex; - if (task->thread.gsindex == GS_TLS_SEL) - base = read_32bit_tls(task, GS_TLS); - else if (doit) { - asm("movl %%gs,%0" : "=r" (gsindex)); - if (gsindex) - rdmsrl(MSR_KERNEL_GS_BASE, base); - else - base = task->thread.gs; - } - else - base = task->thread.gs; - ret = put_user(base, (unsigned long __user *)addr); - break; - } - - default: - ret = -EINVAL; - break; - } - - return ret; -} - -long sys_arch_prctl(int code, unsigned long addr) -{ - return do_arch_prctl(current, code, addr); -} - -/* - * Capture the user space registers if the task is not running (in user space) - */ -int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) -{ - struct pt_regs *pp, ptregs; - - pp = task_pt_regs(tsk); - - ptregs = *pp; - ptregs.cs &= 0xffff; - ptregs.ss &= 0xffff; - - elf_core_copy_regs(regs, &ptregs); - - return 1; -} - -unsigned long arch_align_stack(unsigned long sp) -{ - if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) - sp -= get_random_int() % 8192; - return sp & ~0xf; -} diff --git a/arch/x86_64/kernel/ptrace_64.c b/arch/x86_64/kernel/ptrace_64.c deleted file mode 100644 index eea3702427b..00000000000 --- a/arch/x86_64/kernel/ptrace_64.c +++ /dev/null @@ -1,627 +0,0 @@ -/* ptrace.c */ -/* By Ross Biro 1/23/92 */ -/* - * Pentium III FXSR, SSE support - * Gareth Hughes <gareth@valinux.com>, May 2000 - * - * x86-64 port 2000-2002 Andi Kleen - */ - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/errno.h> -#include <linux/ptrace.h> -#include <linux/user.h> -#include <linux/security.h> -#include <linux/audit.h> -#include <linux/seccomp.h> -#include <linux/signal.h> - -#include <asm/uaccess.h> -#include <asm/pgtable.h> -#include <asm/system.h> -#include <asm/processor.h> -#include <asm/i387.h> -#include <asm/debugreg.h> -#include <asm/ldt.h> -#include <asm/desc.h> -#include <asm/proto.h> -#include <asm/ia32.h> - -/* - * does not yet catch signals sent when the child dies. - * in exit.c or in signal.c. - */ - -/* - * Determines which flags the user has access to [1 = access, 0 = no access]. - * Prohibits changing ID(21), VIP(20), VIF(19), VM(17), IOPL(12-13), IF(9). - * Also masks reserved bits (63-22, 15, 5, 3, 1). - */ -#define FLAG_MASK 0x54dd5UL - -/* set's the trap flag. */ -#define TRAP_FLAG 0x100UL - -/* - * eflags and offset of eflags on child stack.. - */ -#define EFLAGS offsetof(struct pt_regs, eflags) -#define EFL_OFFSET ((int)(EFLAGS-sizeof(struct pt_regs))) - -/* - * this routine will get a word off of the processes privileged stack. - * the offset is how far from the base addr as stored in the TSS. - * this routine assumes that all the privileged stacks are in our - * data space. - */ -static inline unsigned long get_stack_long(struct task_struct *task, int offset) -{ - unsigned char *stack; - - stack = (unsigned char *)task->thread.rsp0; - stack += offset; - return (*((unsigned long *)stack)); -} - -/* - * this routine will put a word on the processes privileged stack. - * the offset is how far from the base addr as stored in the TSS. - * this routine assumes that all the privileged stacks are in our - * data space. - */ -static inline long put_stack_long(struct task_struct *task, int offset, - unsigned long data) -{ - unsigned char * stack; - - stack = (unsigned char *) task->thread.rsp0; - stack += offset; - *(unsigned long *) stack = data; - return 0; -} - -#define LDT_SEGMENT 4 - -unsigned long convert_rip_to_linear(struct task_struct *child, struct pt_regs *regs) -{ - unsigned long addr, seg; - - addr = regs->rip; - seg = regs->cs & 0xffff; - - /* - * We'll assume that the code segments in the GDT - * are all zero-based. That is largely true: the - * TLS segments are used for data, and the PNPBIOS - * and APM bios ones we just ignore here. - */ - if (seg & LDT_SEGMENT) { - u32 *desc; - unsigned long base; - - seg &= ~7UL; - - down(&child->mm->context.sem); - if (unlikely((seg >> 3) >= child->mm->context.size)) - addr = -1L; /* bogus selector, access would fault */ - else { - desc = child->mm->context.ldt + seg; - base = ((desc[0] >> 16) | - ((desc[1] & 0xff) << 16) | - (desc[1] & 0xff000000)); - - /* 16-bit code segment? */ - if (!((desc[1] >> 22) & 1)) - addr &= 0xffff; - addr += base; - } - up(&child->mm->context.sem); - } - - return addr; -} - -static int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs) -{ - int i, copied; - unsigned char opcode[15]; - unsigned long addr = convert_rip_to_linear(child, regs); - - copied = access_process_vm(child, addr, opcode, sizeof(opcode), 0); - for (i = 0; i < copied; i++) { - switch (opcode[i]) { - /* popf and iret */ - case 0x9d: case 0xcf: - return 1; - - /* CHECKME: 64 65 */ - - /* opcode and address size prefixes */ - case 0x66: case 0x67: - continue; - /* irrelevant prefixes (segment overrides and repeats) */ - case 0x26: case 0x2e: - case 0x36: case 0x3e: - case 0x64: case 0x65: - case 0xf2: case 0xf3: - continue; - - case 0x40 ... 0x4f: - if (regs->cs != __USER_CS) - /* 32-bit mode: register increment */ - return 0; - /* 64-bit mode: REX prefix */ - continue; - - /* CHECKME: f2, f3 */ - - /* - * pushf: NOTE! We should probably not let - * the user see the TF bit being set. But - * it's more pain than it's worth to avoid - * it, and a debugger could emulate this - * all in user space if it _really_ cares. - */ - case 0x9c: - default: - return 0; - } - } - return 0; -} - -static void set_singlestep(struct task_struct *child) -{ - struct pt_regs *regs = task_pt_regs(child); - - /* - * Always set TIF_SINGLESTEP - this guarantees that - * we single-step system calls etc.. This will also - * cause us to set TF when returning to user mode. - */ - set_tsk_thread_flag(child, TIF_SINGLESTEP); - - /* - * If TF was already set, don't do anything else - */ - if (regs->eflags & TRAP_FLAG) - return; - - /* Set TF on the kernel stack.. */ - regs->eflags |= TRAP_FLAG; - - /* - * ..but if TF is changed by the instruction we will trace, - * don't mark it as being "us" that set it, so that we - * won't clear it by hand later. - */ - if (is_setting_trap_flag(child, regs)) - return; - - child->ptrace |= PT_DTRACE; -} - -static void clear_singlestep(struct task_struct *child) -{ - /* Always clear TIF_SINGLESTEP... */ - clear_tsk_thread_flag(child, TIF_SINGLESTEP); - - /* But touch TF only if it was set by us.. */ - if (child->ptrace & PT_DTRACE) { - struct pt_regs *regs = task_pt_regs(child); - regs->eflags &= ~TRAP_FLAG; - child->ptrace &= ~PT_DTRACE; - } -} - -/* - * Called by kernel/ptrace.c when detaching.. - * - * Make sure the single step bit is not set. - */ -void ptrace_disable(struct task_struct *child) -{ - clear_singlestep(child); -} - -static int putreg(struct task_struct *child, - unsigned long regno, unsigned long value) -{ - unsigned long tmp; - - switch (regno) { - case offsetof(struct user_regs_struct,fs): - if (value && (value & 3) != 3) - return -EIO; - child->thread.fsindex = value & 0xffff; - return 0; - case offsetof(struct user_regs_struct,gs): - if (value && (value & 3) != 3) - return -EIO; - child->thread.gsindex = value & 0xffff; - return 0; - case offsetof(struct user_regs_struct,ds): - if (value && (value & 3) != 3) - return -EIO; - child->thread.ds = value & 0xffff; - return 0; - case offsetof(struct user_regs_struct,es): - if (value && (value & 3) != 3) - return -EIO; - child->thread.es = value & 0xffff; - return 0; - case offsetof(struct user_regs_struct,ss): - if ((value & 3) != 3) - return -EIO; - value &= 0xffff; - return 0; - case offsetof(struct user_regs_struct,fs_base): - if (value >= TASK_SIZE_OF(child)) - return -EIO; - child->thread.fs = value; - return 0; - case offsetof(struct user_regs_struct,gs_base): - if (value >= TASK_SIZE_OF(child)) - return -EIO; - child->thread.gs = value; - return 0; - case offsetof(struct user_regs_struct, eflags): - value &= FLAG_MASK; - tmp = get_stack_long(child, EFL_OFFSET); - tmp &= ~FLAG_MASK; - value |= tmp; - break; - case offsetof(struct user_regs_struct,cs): - if ((value & 3) != 3) - return -EIO; - value &= 0xffff; - break; - } - put_stack_long(child, regno - sizeof(struct pt_regs), value); - return 0; -} - -static unsigned long getreg(struct task_struct *child, unsigned long regno) -{ - unsigned long val; - switch (regno) { - case offsetof(struct user_regs_struct, fs): - return child->thread.fsindex; - case offsetof(struct user_regs_struct, gs): - return child->thread.gsindex; - case offsetof(struct user_regs_struct, ds): - return child->thread.ds; - case offsetof(struct user_regs_struct, es): - return child->thread.es; - case offsetof(struct user_regs_struct, fs_base): - return child->thread.fs; - case offsetof(struct user_regs_struct, gs_base): - return child->thread.gs; - default: - regno = regno - sizeof(struct pt_regs); - val = get_stack_long(child, regno); - if (test_tsk_thread_flag(child, TIF_IA32)) - val &= 0xffffffff; - return val; - } - -} - -long arch_ptrace(struct task_struct *child, long request, long addr, long data) -{ - long i, ret; - unsigned ui; - - switch (request) { - /* when I and D space are separate, these will need to be fixed. */ - case PTRACE_PEEKTEXT: /* read word at location addr. */ - case PTRACE_PEEKDATA: - ret = generic_ptrace_peekdata(child, addr, data); - break; - - /* read the word at location addr in the USER area. */ - case PTRACE_PEEKUSR: { - unsigned long tmp; - - ret = -EIO; - if ((addr & 7) || - addr > sizeof(struct user) - 7) - break; - - switch (addr) { - case 0 ... sizeof(struct user_regs_struct) - sizeof(long): - tmp = getreg(child, addr); - break; - case offsetof(struct user, u_debugreg[0]): - tmp = child->thread.debugreg0; - break; - case offsetof(struct user, u_debugreg[1]): - tmp = child->thread.debugreg1; - break; - case offsetof(struct user, u_debugreg[2]): - tmp = child->thread.debugreg2; - break; - case offsetof(struct user, u_debugreg[3]): - tmp = child->thread.debugreg3; - break; - case offsetof(struct user, u_debugreg[6]): - tmp = child->thread.debugreg6; - break; - case offsetof(struct user, u_debugreg[7]): - tmp = child->thread.debugreg7; - break; - default: - tmp = 0; - break; - } - ret = put_user(tmp,(unsigned long __user *) data); - break; - } - - /* when I and D space are separate, this will have to be fixed. */ - case PTRACE_POKETEXT: /* write the word at location addr. */ - case PTRACE_POKEDATA: - ret = generic_ptrace_pokedata(child, addr, data); - break; - - case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ - { - int dsize = test_tsk_thread_flag(child, TIF_IA32) ? 3 : 7; - ret = -EIO; - if ((addr & 7) || - addr > sizeof(struct user) - 7) - break; - - switch (addr) { - case 0 ... sizeof(struct user_regs_struct) - sizeof(long): - ret = putreg(child, addr, data); - break; - /* Disallows to set a breakpoint into the vsyscall */ - case offsetof(struct user, u_debugreg[0]): - if (data >= TASK_SIZE_OF(child) - dsize) break; - child->thread.debugreg0 = data; - ret = 0; - break; - case offsetof(struct user, u_debugreg[1]): - if (data >= TASK_SIZE_OF(child) - dsize) break; - child->thread.debugreg1 = data; - ret = 0; - break; - case offsetof(struct user, u_debugreg[2]): - if (data >= TASK_SIZE_OF(child) - dsize) break; - child->thread.debugreg2 = data; - ret = 0; - break; - case offsetof(struct user, u_debugreg[3]): - if (data >= TASK_SIZE_OF(child) - dsize) break; - child->thread.debugreg3 = data; - ret = 0; - break; - case offsetof(struct user, u_debugreg[6]): - if (data >> 32) - break; - child->thread.debugreg6 = data; - ret = 0; - break; - case offsetof(struct user, u_debugreg[7]): - /* See arch/i386/kernel/ptrace.c for an explanation of - * this awkward check.*/ - data &= ~DR_CONTROL_RESERVED; - for(i=0; i<4; i++) - if ((0x5554 >> ((data >> (16 + 4*i)) & 0xf)) & 1) - break; - if (i == 4) { - child->thread.debugreg7 = data; - if (data) - set_tsk_thread_flag(child, TIF_DEBUG); - else - clear_tsk_thread_flag(child, TIF_DEBUG); - ret = 0; - } - break; - } - break; - } - case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ - case PTRACE_CONT: /* restart after signal. */ - - ret = -EIO; - if (!valid_signal(data)) - break; - if (request == PTRACE_SYSCALL) - set_tsk_thread_flag(child,TIF_SYSCALL_TRACE); - else - clear_tsk_thread_flag(child,TIF_SYSCALL_TRACE); - clear_tsk_thread_flag(child, TIF_SINGLESTEP); - child->exit_code = data; - /* make sure the single step bit is not set. */ - clear_singlestep(child); - wake_up_process(child); - ret = 0; - break; - -#ifdef CONFIG_IA32_EMULATION - /* This makes only sense with 32bit programs. Allow a - 64bit debugger to fully examine them too. Better - don't use it against 64bit processes, use - PTRACE_ARCH_PRCTL instead. */ - case PTRACE_SET_THREAD_AREA: { - struct user_desc __user *p; - int old; - p = (struct user_desc __user *)data; - get_user(old, &p->entry_number); - put_user(addr, &p->entry_number); - ret = do_set_thread_area(&child->thread, p); - put_user(old, &p->entry_number); - break; - case PTRACE_GET_THREAD_AREA: - p = (struct user_desc __user *)data; - get_user(old, &p->entry_number); - put_user(addr, &p->entry_number); - ret = do_get_thread_area(&child->thread, p); - put_user(old, &p->entry_number); - break; - } -#endif - /* normal 64bit interface to access TLS data. - Works just like arch_prctl, except that the arguments - are reversed. */ - case PTRACE_ARCH_PRCTL: - ret = do_arch_prctl(child, data, addr); - break; - -/* - * make the child exit. Best I can do is send it a sigkill. - * perhaps it should be put in the status that it wants to - * exit. - */ - case PTRACE_KILL: - ret = 0; - if (child->exit_state == EXIT_ZOMBIE) /* already dead */ - break; - clear_tsk_thread_flag(child, TIF_SINGLESTEP); - child->exit_code = SIGKILL; - /* make sure the single step bit is not set. */ - clear_singlestep(child); - wake_up_process(child); - break; - - case PTRACE_SINGLESTEP: /* set the trap flag. */ - ret = -EIO; - if (!valid_signal(data)) - break; - clear_tsk_thread_flag(child,TIF_SYSCALL_TRACE); - set_singlestep(child); - child->exit_code = data; - /* give it a chance to run. */ - wake_up_process(child); - ret = 0; - break; - - case PTRACE_DETACH: - /* detach a process that was attached. */ - ret = ptrace_detach(child, data); - break; - - case PTRACE_GETREGS: { /* Get all gp regs from the child. */ - if (!access_ok(VERIFY_WRITE, (unsigned __user *)data, - sizeof(struct user_regs_struct))) { - ret = -EIO; - break; - } - ret = 0; - for (ui = 0; ui < sizeof(struct user_regs_struct); ui += sizeof(long)) { - ret |= __put_user(getreg(child, ui),(unsigned long __user *) data); - data += sizeof(long); - } - break; - } - - case PTRACE_SETREGS: { /* Set all gp regs in the child. */ - unsigned long tmp; - if (!access_ok(VERIFY_READ, (unsigned __user *)data, - sizeof(struct user_regs_struct))) { - ret = -EIO; - break; - } - ret = 0; - for (ui = 0; ui < sizeof(struct user_regs_struct); ui += sizeof(long)) { - ret = __get_user(tmp, (unsigned long __user *) data); - if (ret) - break; - ret = putreg(child, ui, tmp); - if (ret) - break; - data += sizeof(long); - } - break; - } - - case PTRACE_GETFPREGS: { /* Get the child extended FPU state. */ - if (!access_ok(VERIFY_WRITE, (unsigned __user *)data, - sizeof(struct user_i387_struct))) { - ret = -EIO; - break; - } - ret = get_fpregs((struct user_i387_struct __user *)data, child); - break; - } - - case PTRACE_SETFPREGS: { /* Set the child extended FPU state. */ - if (!access_ok(VERIFY_READ, (unsigned __user *)data, - sizeof(struct user_i387_struct))) { - ret = -EIO; - break; - } - set_stopped_child_used_math(child); - ret = set_fpregs(child, (struct user_i387_struct __user *)data); - break; - } - - default: - ret = ptrace_request(child, request, addr, data); - break; - } - return ret; -} - -static void syscall_trace(struct pt_regs *regs) -{ - -#if 0 - printk("trace %s rip %lx rsp %lx rax %d origrax %d caller %lx tiflags %x ptrace %x\n", - current->comm, - regs->rip, regs->rsp, regs->rax, regs->orig_rax, __builtin_return_address(0), - current_thread_info()->flags, current->ptrace); -#endif - - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) - ? 0x80 : 0)); - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } -} - -asmlinkage void syscall_trace_enter(struct pt_regs *regs) -{ - /* do the secure computing check first */ - secure_computing(regs->orig_rax); - - if (test_thread_flag(TIF_SYSCALL_TRACE) - && (current->ptrace & PT_PTRACED)) - syscall_trace(regs); - - if (unlikely(current->audit_context)) { - if (test_thread_flag(TIF_IA32)) { - audit_syscall_entry(AUDIT_ARCH_I386, - regs->orig_rax, - regs->rbx, regs->rcx, - regs->rdx, regs->rsi); - } else { - audit_syscall_entry(AUDIT_ARCH_X86_64, - regs->orig_rax, - regs->rdi, regs->rsi, - regs->rdx, regs->r10); - } - } -} - -asmlinkage void syscall_trace_leave(struct pt_regs *regs) -{ - if (unlikely(current->audit_context)) - audit_syscall_exit(AUDITSC_RESULT(regs->rax), regs->rax); - - if ((test_thread_flag(TIF_SYSCALL_TRACE) - || test_thread_flag(TIF_SINGLESTEP)) - && (current->ptrace & PT_PTRACED)) - syscall_trace(regs); -} diff --git a/arch/x86_64/kernel/reboot_64.c b/arch/x86_64/kernel/reboot_64.c deleted file mode 100644 index 368db2b9c5a..00000000000 --- a/arch/x86_64/kernel/reboot_64.c +++ /dev/null @@ -1,171 +0,0 @@ -/* Various gunk just to reboot the machine. */ -#include <linux/module.h> -#include <linux/reboot.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/kernel.h> -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/pm.h> -#include <linux/kdebug.h> -#include <linux/sched.h> -#include <asm/io.h> -#include <asm/delay.h> -#include <asm/hw_irq.h> -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/tlbflush.h> -#include <asm/apic.h> -#include <asm/iommu.h> - -/* - * Power off function, if any - */ -void (*pm_power_off)(void); -EXPORT_SYMBOL(pm_power_off); - -static long no_idt[3]; -static enum { - BOOT_TRIPLE = 't', - BOOT_KBD = 'k' -} reboot_type = BOOT_KBD; -static int reboot_mode = 0; -int reboot_force; - -/* reboot=t[riple] | k[bd] [, [w]arm | [c]old] - warm Don't set the cold reboot flag - cold Set the cold reboot flag - triple Force a triple fault (init) - kbd Use the keyboard controller. cold reset (default) - force Avoid anything that could hang. - */ -static int __init reboot_setup(char *str) -{ - for (;;) { - switch (*str) { - case 'w': - reboot_mode = 0x1234; - break; - - case 'c': - reboot_mode = 0; - break; - - case 't': - case 'b': - case 'k': - reboot_type = *str; - break; - case 'f': - reboot_force = 1; - break; - } - if((str = strchr(str,',')) != NULL) - str++; - else - break; - } - return 1; -} - -__setup("reboot=", reboot_setup); - -static inline void kb_wait(void) -{ - int i; - - for (i=0; i<0x10000; i++) - if ((inb_p(0x64) & 0x02) == 0) - break; -} - -void machine_shutdown(void) -{ - unsigned long flags; - - /* Stop the cpus and apics */ -#ifdef CONFIG_SMP - int reboot_cpu_id; - - /* The boot cpu is always logical cpu 0 */ - reboot_cpu_id = 0; - - /* Make certain the cpu I'm about to reboot on is online */ - if (!cpu_isset(reboot_cpu_id, cpu_online_map)) { - reboot_cpu_id = smp_processor_id(); - } - - /* Make certain I only run on the appropriate processor */ - set_cpus_allowed(current, cpumask_of_cpu(reboot_cpu_id)); - - /* O.K Now that I'm on the appropriate processor, - * stop all of the others. - */ - smp_send_stop(); -#endif - - local_irq_save(flags); - -#ifndef CONFIG_SMP - disable_local_APIC(); -#endif - - disable_IO_APIC(); - - local_irq_restore(flags); - - pci_iommu_shutdown(); -} - -void machine_emergency_restart(void) -{ - int i; - - /* Tell the BIOS if we want cold or warm reboot */ - *((unsigned short *)__va(0x472)) = reboot_mode; - - for (;;) { - /* Could also try the reset bit in the Hammer NB */ - switch (reboot_type) { - case BOOT_KBD: - for (i=0; i<10; i++) { - kb_wait(); - udelay(50); - outb(0xfe,0x64); /* pulse reset low */ - udelay(50); - } - - case BOOT_TRIPLE: - __asm__ __volatile__("lidt (%0)": :"r" (&no_idt)); - __asm__ __volatile__("int3"); - - reboot_type = BOOT_KBD; - break; - } - } -} - -void machine_restart(char * __unused) -{ - printk("machine restart\n"); - - if (!reboot_force) { - machine_shutdown(); - } - machine_emergency_restart(); -} - -void machine_halt(void) -{ -} - -void machine_power_off(void) -{ - if (pm_power_off) { - if (!reboot_force) { - machine_shutdown(); - } - pm_power_off(); - } -} - diff --git a/arch/x86_64/kernel/relocate_kernel_64.S b/arch/x86_64/kernel/relocate_kernel_64.S deleted file mode 100644 index 14e95872c6a..00000000000 --- a/arch/x86_64/kernel/relocate_kernel_64.S +++ /dev/null @@ -1,276 +0,0 @@ -/* - * relocate_kernel.S - put the kernel image in place to boot - * Copyright (C) 2002-2005 Eric Biederman <ebiederm@xmission.com> - * - * This source code is licensed under the GNU General Public License, - * Version 2. See the file COPYING for more details. - */ - -#include <linux/linkage.h> -#include <asm/page.h> -#include <asm/kexec.h> - -/* - * Must be relocatable PIC code callable as a C function - */ - -#define PTR(x) (x << 3) -#define PAGE_ALIGNED (1 << PAGE_SHIFT) -#define PAGE_ATTR 0x63 /* _PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY */ - - .text - .align PAGE_ALIGNED - .code64 - .globl relocate_kernel -relocate_kernel: - /* %rdi indirection_page - * %rsi page_list - * %rdx start address - */ - - /* map the control page at its virtual address */ - - movq $0x0000ff8000000000, %r10 /* mask */ - mov $(39 - 3), %cl /* bits to shift */ - movq PTR(VA_CONTROL_PAGE)(%rsi), %r11 /* address to map */ - - movq %r11, %r9 - andq %r10, %r9 - shrq %cl, %r9 - - movq PTR(VA_PGD)(%rsi), %r8 - addq %r8, %r9 - movq PTR(PA_PUD_0)(%rsi), %r8 - orq $PAGE_ATTR, %r8 - movq %r8, (%r9) - - shrq $9, %r10 - sub $9, %cl - - movq %r11, %r9 - andq %r10, %r9 - shrq %cl, %r9 - - movq PTR(VA_PUD_0)(%rsi), %r8 - addq %r8, %r9 - movq PTR(PA_PMD_0)(%rsi), %r8 - orq $PAGE_ATTR, %r8 - movq %r8, (%r9) - - shrq $9, %r10 - sub $9, %cl - - movq %r11, %r9 - andq %r10, %r9 - shrq %cl, %r9 - - movq PTR(VA_PMD_0)(%rsi), %r8 - addq %r8, %r9 - movq PTR(PA_PTE_0)(%rsi), %r8 - orq $PAGE_ATTR, %r8 - movq %r8, (%r9) - - shrq $9, %r10 - sub $9, %cl - - movq %r11, %r9 - andq %r10, %r9 - shrq %cl, %r9 - - movq PTR(VA_PTE_0)(%rsi), %r8 - addq %r8, %r9 - movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 - orq $PAGE_ATTR, %r8 - movq %r8, (%r9) - - /* identity map the control page at its physical address */ - - movq $0x0000ff8000000000, %r10 /* mask */ - mov $(39 - 3), %cl /* bits to shift */ - movq PTR(PA_CONTROL_PAGE)(%rsi), %r11 /* address to map */ - - movq %r11, %r9 - andq %r10, %r9 - shrq %cl, %r9 - - movq PTR(VA_PGD)(%rsi), %r8 - addq %r8, %r9 - movq PTR(PA_PUD_1)(%rsi), %r8 - orq $PAGE_ATTR, %r8 - movq %r8, (%r9) - - shrq $9, %r10 - sub $9, %cl - - movq %r11, %r9 - andq %r10, %r9 - shrq %cl, %r9 - - movq PTR(VA_PUD_1)(%rsi), %r8 - addq %r8, %r9 - movq PTR(PA_PMD_1)(%rsi), %r8 - orq $PAGE_ATTR, %r8 - movq %r8, (%r9) - - shrq $9, %r10 - sub $9, %cl - - movq %r11, %r9 - andq %r10, %r9 - shrq %cl, %r9 - - movq PTR(VA_PMD_1)(%rsi), %r8 - addq %r8, %r9 - movq PTR(PA_PTE_1)(%rsi), %r8 - orq $PAGE_ATTR, %r8 - movq %r8, (%r9) - - shrq $9, %r10 - sub $9, %cl - - movq %r11, %r9 - andq %r10, %r9 - shrq %cl, %r9 - - movq PTR(VA_PTE_1)(%rsi), %r8 - addq %r8, %r9 - movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 - orq $PAGE_ATTR, %r8 - movq %r8, (%r9) - -relocate_new_kernel: - /* %rdi indirection_page - * %rsi page_list - * %rdx start address - */ - - /* zero out flags, and disable interrupts */ - pushq $0 - popfq - - /* get physical address of control page now */ - /* this is impossible after page table switch */ - movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 - - /* get physical address of page table now too */ - movq PTR(PA_TABLE_PAGE)(%rsi), %rcx - - /* switch to new set of page tables */ - movq PTR(PA_PGD)(%rsi), %r9 - movq %r9, %cr3 - - /* setup a new stack at the end of the physical control page */ - lea 4096(%r8), %rsp - - /* jump to identity mapped page */ - addq $(identity_mapped - relocate_kernel), %r8 - pushq %r8 - ret - -identity_mapped: - /* store the start address on the stack */ - pushq %rdx - - /* Set cr0 to a known state: - * 31 1 == Paging enabled - * 18 0 == Alignment check disabled - * 16 0 == Write protect disabled - * 3 0 == No task switch - * 2 0 == Don't do FP software emulation. - * 0 1 == Proctected mode enabled - */ - movq %cr0, %rax - andq $~((1<<18)|(1<<16)|(1<<3)|(1<<2)), %rax - orl $((1<<31)|(1<<0)), %eax - movq %rax, %cr0 - - /* Set cr4 to a known state: - * 10 0 == xmm exceptions disabled - * 9 0 == xmm registers instructions disabled - * 8 0 == performance monitoring counter disabled - * 7 0 == page global disabled - * 6 0 == machine check exceptions disabled - * 5 1 == physical address extension enabled - * 4 0 == page size extensions disabled - * 3 0 == Debug extensions disabled - * 2 0 == Time stamp disable (disabled) - * 1 0 == Protected mode virtual interrupts disabled - * 0 0 == VME disabled - */ - - movq $((1<<5)), %rax - movq %rax, %cr4 - - jmp 1f -1: - - /* Switch to the identity mapped page tables, - * and flush the TLB. - */ - movq %rcx, %cr3 - - /* Do the copies */ - movq %rdi, %rcx /* Put the page_list in %rcx */ - xorq %rdi, %rdi - xorq %rsi, %rsi - jmp 1f - -0: /* top, read another word for the indirection page */ - - movq (%rbx), %rcx - addq $8, %rbx -1: - testq $0x1, %rcx /* is it a destination page? */ - jz 2f - movq %rcx, %rdi - andq $0xfffffffffffff000, %rdi - jmp 0b -2: - testq $0x2, %rcx /* is it an indirection page? */ - jz 2f - movq %rcx, %rbx - andq $0xfffffffffffff000, %rbx - jmp 0b -2: - testq $0x4, %rcx /* is it the done indicator? */ - jz 2f - jmp 3f -2: - testq $0x8, %rcx /* is it the source indicator? */ - jz 0b /* Ignore it otherwise */ - movq %rcx, %rsi /* For ever source page do a copy */ - andq $0xfffffffffffff000, %rsi - - movq $512, %rcx - rep ; movsq - jmp 0b -3: - - /* To be certain of avoiding problems with self-modifying code - * I need to execute a serializing instruction here. - * So I flush the TLB by reloading %cr3 here, it's handy, - * and not processor dependent. - */ - movq %cr3, %rax - movq %rax, %cr3 - - /* set all of the registers to known values */ - /* leave %rsp alone */ - - xorq %rax, %rax - xorq %rbx, %rbx - xorq %rcx, %rcx - xorq %rdx, %rdx - xorq %rsi, %rsi - xorq %rdi, %rdi - xorq %rbp, %rbp - xorq %r8, %r8 - xorq %r9, %r9 - xorq %r10, %r9 - xorq %r11, %r11 - xorq %r12, %r12 - xorq %r13, %r13 - xorq %r14, %r14 - xorq %r15, %r15 - - ret diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c deleted file mode 100644 index 1200aaac403..00000000000 --- a/arch/x86_64/kernel/setup64.c +++ /dev/null @@ -1,289 +0,0 @@ -/* - * X86-64 specific CPU setup. - * Copyright (C) 1995 Linus Torvalds - * Copyright 2001, 2002, 2003 SuSE Labs / Andi Kleen. - * See setup.c for older changelog. - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/bootmem.h> -#include <linux/bitops.h> -#include <linux/module.h> -#include <asm/bootsetup.h> -#include <asm/pda.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/desc.h> -#include <asm/atomic.h> -#include <asm/mmu_context.h> -#include <asm/smp.h> -#include <asm/i387.h> -#include <asm/percpu.h> -#include <asm/proto.h> -#include <asm/sections.h> - -char x86_boot_params[BOOT_PARAM_SIZE] __initdata; - -cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; - -struct x8664_pda *_cpu_pda[NR_CPUS] __read_mostly; -EXPORT_SYMBOL(_cpu_pda); -struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned; - -struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; - -char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned"))); - -unsigned long __supported_pte_mask __read_mostly = ~0UL; -static int do_not_nx __cpuinitdata = 0; - -/* noexec=on|off -Control non executable mappings for 64bit processes. - -on Enable(default) -off Disable -*/ -static int __init nonx_setup(char *str) -{ - if (!str) - return -EINVAL; - if (!strncmp(str, "on", 2)) { - __supported_pte_mask |= _PAGE_NX; - do_not_nx = 0; - } else if (!strncmp(str, "off", 3)) { - do_not_nx = 1; - __supported_pte_mask &= ~_PAGE_NX; - } - return 0; -} -early_param("noexec", nonx_setup); - -int force_personality32 = 0; - -/* noexec32=on|off -Control non executable heap for 32bit processes. -To control the stack too use noexec=off - -on PROT_READ does not imply PROT_EXEC for 32bit processes -off PROT_READ implies PROT_EXEC (default) -*/ -static int __init nonx32_setup(char *str) -{ - if (!strcmp(str, "on")) - force_personality32 &= ~READ_IMPLIES_EXEC; - else if (!strcmp(str, "off")) - force_personality32 |= READ_IMPLIES_EXEC; - return 1; -} -__setup("noexec32=", nonx32_setup); - -/* - * Great future plan: - * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data. - * Always point %gs to its beginning - */ -void __init setup_per_cpu_areas(void) -{ - int i; - unsigned long size; - -#ifdef CONFIG_HOTPLUG_CPU - prefill_possible_map(); -#endif - - /* Copy section for each CPU (we discard the original) */ - size = PERCPU_ENOUGH_ROOM; - - printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n", size); - for_each_cpu_mask (i, cpu_possible_map) { - char *ptr; - - if (!NODE_DATA(cpu_to_node(i))) { - printk("cpu with no node %d, num_online_nodes %d\n", - i, num_online_nodes()); - ptr = alloc_bootmem_pages(size); - } else { - ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(i)), size); - } - if (!ptr) - panic("Cannot allocate cpu data for CPU %d\n", i); - cpu_pda(i)->data_offset = ptr - __per_cpu_start; - memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); - } -} - -void pda_init(int cpu) -{ - struct x8664_pda *pda = cpu_pda(cpu); - - /* Setup up data that may be needed in __get_free_pages early */ - asm volatile("movl %0,%%fs ; movl %0,%%gs" :: "r" (0)); - /* Memory clobbers used to order PDA accessed */ - mb(); - wrmsrl(MSR_GS_BASE, pda); - mb(); - - pda->cpunumber = cpu; - pda->irqcount = -1; - pda->kernelstack = - (unsigned long)stack_thread_info() - PDA_STACKOFFSET + THREAD_SIZE; - pda->active_mm = &init_mm; - pda->mmu_state = 0; - - if (cpu == 0) { - /* others are initialized in smpboot.c */ - pda->pcurrent = &init_task; - pda->irqstackptr = boot_cpu_stack; - } else { - pda->irqstackptr = (char *) - __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER); - if (!pda->irqstackptr) - panic("cannot allocate irqstack for cpu %d", cpu); - } - - - pda->irqstackptr += IRQSTACKSIZE-64; -} - -char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ] -__attribute__((section(".bss.page_aligned"))); - -extern asmlinkage void ignore_sysret(void); - -/* May not be marked __init: used by software suspend */ -void syscall_init(void) -{ - /* - * LSTAR and STAR live in a bit strange symbiosis. - * They both write to the same internal register. STAR allows to set CS/DS - * but only a 32bit target. LSTAR sets the 64bit rip. - */ - wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32); - wrmsrl(MSR_LSTAR, system_call); - wrmsrl(MSR_CSTAR, ignore_sysret); - -#ifdef CONFIG_IA32_EMULATION - syscall32_cpu_init (); -#endif - - /* Flags to clear on syscall */ - wrmsrl(MSR_SYSCALL_MASK, EF_TF|EF_DF|EF_IE|0x3000); -} - -void __cpuinit check_efer(void) -{ - unsigned long efer; - - rdmsrl(MSR_EFER, efer); - if (!(efer & EFER_NX) || do_not_nx) { - __supported_pte_mask &= ~_PAGE_NX; - } -} - -unsigned long kernel_eflags; - -/* - * cpu_init() initializes state that is per-CPU. Some data is already - * initialized (naturally) in the bootstrap process, such as the GDT - * and IDT. We reload them nevertheless, this function acts as a - * 'CPU state barrier', nothing should get across. - * A lot of state is already set up in PDA init. - */ -void __cpuinit cpu_init (void) -{ - int cpu = stack_smp_processor_id(); - struct tss_struct *t = &per_cpu(init_tss, cpu); - struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu); - unsigned long v; - char *estacks = NULL; - struct task_struct *me; - int i; - - /* CPU 0 is initialised in head64.c */ - if (cpu != 0) { - pda_init(cpu); - } else - estacks = boot_exception_stacks; - - me = current; - - if (cpu_test_and_set(cpu, cpu_initialized)) - panic("CPU#%d already initialized!\n", cpu); - - printk("Initializing CPU#%d\n", cpu); - - clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); - - /* - * Initialize the per-CPU GDT with the boot GDT, - * and set up the GDT descriptor: - */ - if (cpu) - memcpy(cpu_gdt(cpu), cpu_gdt_table, GDT_SIZE); - - cpu_gdt_descr[cpu].size = GDT_SIZE; - asm volatile("lgdt %0" :: "m" (cpu_gdt_descr[cpu])); - asm volatile("lidt %0" :: "m" (idt_descr)); - - memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8); - syscall_init(); - - wrmsrl(MSR_FS_BASE, 0); - wrmsrl(MSR_KERNEL_GS_BASE, 0); - barrier(); - - check_efer(); - - /* - * set up and load the per-CPU TSS - */ - for (v = 0; v < N_EXCEPTION_STACKS; v++) { - static const unsigned int order[N_EXCEPTION_STACKS] = { - [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, - [DEBUG_STACK - 1] = DEBUG_STACK_ORDER - }; - if (cpu) { - estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]); - if (!estacks) - panic("Cannot allocate exception stack %ld %d\n", - v, cpu); - } - estacks += PAGE_SIZE << order[v]; - orig_ist->ist[v] = t->ist[v] = (unsigned long)estacks; - } - - t->io_bitmap_base = offsetof(struct tss_struct, io_bitmap); - /* - * <= is required because the CPU will access up to - * 8 bits beyond the end of the IO permission bitmap. - */ - for (i = 0; i <= IO_BITMAP_LONGS; i++) - t->io_bitmap[i] = ~0UL; - - atomic_inc(&init_mm.mm_count); - me->active_mm = &init_mm; - if (me->mm) - BUG(); - enter_lazy_tlb(&init_mm, me); - - set_tss_desc(cpu, t); - load_TR_desc(); - load_LDT(&init_mm.context); - - /* - * Clear all 6 debug registers: - */ - - set_debugreg(0UL, 0); - set_debugreg(0UL, 1); - set_debugreg(0UL, 2); - set_debugreg(0UL, 3); - set_debugreg(0UL, 6); - set_debugreg(0UL, 7); - - fpu_init(); - - raw_local_save_flags(kernel_eflags); -} diff --git a/arch/x86_64/kernel/setup_64.c b/arch/x86_64/kernel/setup_64.c deleted file mode 100644 index af838f6b0b7..00000000000 --- a/arch/x86_64/kernel/setup_64.c +++ /dev/null @@ -1,1117 +0,0 @@ -/* - * linux/arch/x86-64/kernel/setup.c - * - * Copyright (C) 1995 Linus Torvalds - * - * Nov 2001 Dave Jones <davej@suse.de> - * Forked from i386 setup code. - */ - -/* - * This file handles the architecture-dependent parts of initialization - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/a.out.h> -#include <linux/screen_info.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/initrd.h> -#include <linux/highmem.h> -#include <linux/bootmem.h> -#include <linux/module.h> -#include <asm/processor.h> -#include <linux/console.h> -#include <linux/seq_file.h> -#include <linux/crash_dump.h> -#include <linux/root_dev.h> -#include <linux/pci.h> -#include <linux/acpi.h> -#include <linux/kallsyms.h> -#include <linux/edd.h> -#include <linux/mmzone.h> -#include <linux/kexec.h> -#include <linux/cpufreq.h> -#include <linux/dmi.h> -#include <linux/dma-mapping.h> -#include <linux/ctype.h> - -#include <asm/mtrr.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/msr.h> -#include <asm/desc.h> -#include <video/edid.h> -#include <asm/e820.h> -#include <asm/dma.h> -#include <asm/mpspec.h> -#include <asm/mmu_context.h> -#include <asm/bootsetup.h> -#include <asm/proto.h> -#include <asm/setup.h> -#include <asm/mach_apic.h> -#include <asm/numa.h> -#include <asm/sections.h> -#include <asm/dmi.h> - -/* - * Machine setup.. - */ - -struct cpuinfo_x86 boot_cpu_data __read_mostly; -EXPORT_SYMBOL(boot_cpu_data); - -unsigned long mmu_cr4_features; - -/* Boot loader ID as an integer, for the benefit of proc_dointvec */ -int bootloader_type; - -unsigned long saved_video_mode; - -int force_mwait __cpuinitdata; - -/* - * Early DMI memory - */ -int dmi_alloc_index; -char dmi_alloc_data[DMI_MAX_DATA]; - -/* - * Setup options - */ -struct screen_info screen_info; -EXPORT_SYMBOL(screen_info); -struct sys_desc_table_struct { - unsigned short length; - unsigned char table[0]; -}; - -struct edid_info edid_info; -EXPORT_SYMBOL_GPL(edid_info); - -extern int root_mountflags; - -char __initdata command_line[COMMAND_LINE_SIZE]; - -struct resource standard_io_resources[] = { - { .name = "dma1", .start = 0x00, .end = 0x1f, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "pic1", .start = 0x20, .end = 0x21, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "timer0", .start = 0x40, .end = 0x43, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "timer1", .start = 0x50, .end = 0x53, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "keyboard", .start = 0x60, .end = 0x6f, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "dma page reg", .start = 0x80, .end = 0x8f, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "pic2", .start = 0xa0, .end = 0xa1, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "dma2", .start = 0xc0, .end = 0xdf, - .flags = IORESOURCE_BUSY | IORESOURCE_IO }, - { .name = "fpu", .start = 0xf0, .end = 0xff, - .flags = IORESOURCE_BUSY | IORESOURCE_IO } -}; - -#define IORESOURCE_RAM (IORESOURCE_BUSY | IORESOURCE_MEM) - -struct resource data_resource = { - .name = "Kernel data", - .start = 0, - .end = 0, - .flags = IORESOURCE_RAM, -}; -struct resource code_resource = { - .name = "Kernel code", - .start = 0, - .end = 0, - .flags = IORESOURCE_RAM, -}; - -#ifdef CONFIG_PROC_VMCORE -/* elfcorehdr= specifies the location of elf core header - * stored by the crashed kernel. This option will be passed - * by kexec loader to the capture kernel. - */ -static int __init setup_elfcorehdr(char *arg) -{ - char *end; - if (!arg) - return -EINVAL; - elfcorehdr_addr = memparse(arg, &end); - return end > arg ? 0 : -EINVAL; -} -early_param("elfcorehdr", setup_elfcorehdr); -#endif - -#ifndef CONFIG_NUMA -static void __init -contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn) -{ - unsigned long bootmap_size, bootmap; - - bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT; - bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size); - if (bootmap == -1L) - panic("Cannot find bootmem map of size %ld\n",bootmap_size); - bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, end_pfn); - e820_register_active_regions(0, start_pfn, end_pfn); - free_bootmem_with_active_regions(0, end_pfn); - reserve_bootmem(bootmap, bootmap_size); -} -#endif - -#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) -struct edd edd; -#ifdef CONFIG_EDD_MODULE -EXPORT_SYMBOL(edd); -#endif -/** - * copy_edd() - Copy the BIOS EDD information - * from boot_params into a safe place. - * - */ -static inline void copy_edd(void) -{ - memcpy(edd.mbr_signature, EDD_MBR_SIGNATURE, sizeof(edd.mbr_signature)); - memcpy(edd.edd_info, EDD_BUF, sizeof(edd.edd_info)); - edd.mbr_signature_nr = EDD_MBR_SIG_NR; - edd.edd_info_nr = EDD_NR; -} -#else -static inline void copy_edd(void) -{ -} -#endif - -#define EBDA_ADDR_POINTER 0x40E - -unsigned __initdata ebda_addr; -unsigned __initdata ebda_size; - -static void discover_ebda(void) -{ - /* - * there is a real-mode segmented pointer pointing to the - * 4K EBDA area at 0x40E - */ - ebda_addr = *(unsigned short *)__va(EBDA_ADDR_POINTER); - ebda_addr <<= 4; - - ebda_size = *(unsigned short *)__va(ebda_addr); - - /* Round EBDA up to pages */ - if (ebda_size == 0) - ebda_size = 1; - ebda_size <<= 10; - ebda_size = round_up(ebda_size + (ebda_addr & ~PAGE_MASK), PAGE_SIZE); - if (ebda_size > 64*1024) - ebda_size = 64*1024; -} - -void __init setup_arch(char **cmdline_p) -{ - printk(KERN_INFO "Command line: %s\n", boot_command_line); - - ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); - screen_info = SCREEN_INFO; - edid_info = EDID_INFO; - saved_video_mode = SAVED_VIDEO_MODE; - bootloader_type = LOADER_TYPE; - -#ifdef CONFIG_BLK_DEV_RAM - rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK; - rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0); - rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0); -#endif - setup_memory_region(); - copy_edd(); - - if (!MOUNT_ROOT_RDONLY) - root_mountflags &= ~MS_RDONLY; - init_mm.start_code = (unsigned long) &_text; - init_mm.end_code = (unsigned long) &_etext; - init_mm.end_data = (unsigned long) &_edata; - init_mm.brk = (unsigned long) &_end; - - code_resource.start = virt_to_phys(&_text); - code_resource.end = virt_to_phys(&_etext)-1; - data_resource.start = virt_to_phys(&_etext); - data_resource.end = virt_to_phys(&_edata)-1; - - early_identify_cpu(&boot_cpu_data); - - strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); - *cmdline_p = command_line; - - parse_early_param(); - - finish_e820_parsing(); - - e820_register_active_regions(0, 0, -1UL); - /* - * partially used pages are not usable - thus - * we are rounding upwards: - */ - end_pfn = e820_end_of_ram(); - num_physpages = end_pfn; - - check_efer(); - - discover_ebda(); - - init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT)); - - dmi_scan_machine(); - -#ifdef CONFIG_ACPI - /* - * Initialize the ACPI boot-time table parser (gets the RSDP and SDT). - * Call this early for SRAT node setup. - */ - acpi_boot_table_init(); -#endif - - /* How many end-of-memory variables you have, grandma! */ - max_low_pfn = end_pfn; - max_pfn = end_pfn; - high_memory = (void *)__va(end_pfn * PAGE_SIZE - 1) + 1; - - /* Remove active ranges so rediscovery with NUMA-awareness happens */ - remove_all_active_ranges(); - -#ifdef CONFIG_ACPI_NUMA - /* - * Parse SRAT to discover nodes. - */ - acpi_numa_init(); -#endif - -#ifdef CONFIG_NUMA - numa_initmem_init(0, end_pfn); -#else - contig_initmem_init(0, end_pfn); -#endif - - /* Reserve direct mapping */ - reserve_bootmem_generic(table_start << PAGE_SHIFT, - (table_end - table_start) << PAGE_SHIFT); - - /* reserve kernel */ - reserve_bootmem_generic(__pa_symbol(&_text), - __pa_symbol(&_end) - __pa_symbol(&_text)); - - /* - * reserve physical page 0 - it's a special BIOS page on many boxes, - * enabling clean reboots, SMP operation, laptop functions. - */ - reserve_bootmem_generic(0, PAGE_SIZE); - - /* reserve ebda region */ - if (ebda_addr) - reserve_bootmem_generic(ebda_addr, ebda_size); -#ifdef CONFIG_NUMA - /* reserve nodemap region */ - if (nodemap_addr) - reserve_bootmem_generic(nodemap_addr, nodemap_size); -#endif - -#ifdef CONFIG_SMP - /* Reserve SMP trampoline */ - reserve_bootmem_generic(SMP_TRAMPOLINE_BASE, 2*PAGE_SIZE); -#endif - -#ifdef CONFIG_ACPI_SLEEP - /* - * Reserve low memory region for sleep support. - */ - acpi_reserve_bootmem(); -#endif - /* - * Find and reserve possible boot-time SMP configuration: - */ - find_smp_config(); -#ifdef CONFIG_BLK_DEV_INITRD - if (LOADER_TYPE && INITRD_START) { - if (INITRD_START + INITRD_SIZE <= (end_pfn << PAGE_SHIFT)) { - reserve_bootmem_generic(INITRD_START, INITRD_SIZE); - initrd_start = INITRD_START + PAGE_OFFSET; - initrd_end = initrd_start+INITRD_SIZE; - } - else { - printk(KERN_ERR "initrd extends beyond end of memory " - "(0x%08lx > 0x%08lx)\ndisabling initrd\n", - (unsigned long)(INITRD_START + INITRD_SIZE), - (unsigned long)(end_pfn << PAGE_SHIFT)); - initrd_start = 0; - } - } -#endif -#ifdef CONFIG_KEXEC - if (crashk_res.start != crashk_res.end) { - reserve_bootmem_generic(crashk_res.start, - crashk_res.end - crashk_res.start + 1); - } -#endif - - paging_init(); - -#ifdef CONFIG_PCI - early_quirks(); -#endif - - /* - * set this early, so we dont allocate cpu0 - * if MADT list doesnt list BSP first - * mpparse.c/MP_processor_info() allocates logical cpu numbers. - */ - cpu_set(0, cpu_present_map); -#ifdef CONFIG_ACPI - /* - * Read APIC and some other early information from ACPI tables. - */ - acpi_boot_init(); -#endif - - init_cpu_to_node(); - - /* - * get boot-time SMP configuration: - */ - if (smp_found_config) - get_smp_config(); - init_apic_mappings(); - - /* - * We trust e820 completely. No explicit ROM probing in memory. - */ - e820_reserve_resources(); - e820_mark_nosave_regions(); - - { - unsigned i; - /* request I/O space for devices used on all i[345]86 PCs */ - for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) - request_resource(&ioport_resource, &standard_io_resources[i]); - } - - e820_setup_gap(); - -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - conswitchp = &vga_con; -#elif defined(CONFIG_DUMMY_CONSOLE) - conswitchp = &dummy_con; -#endif -#endif -} - -static int __cpuinit get_model_name(struct cpuinfo_x86 *c) -{ - unsigned int *v; - - if (c->extended_cpuid_level < 0x80000004) - return 0; - - v = (unsigned int *) c->x86_model_id; - cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]); - cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]); - cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]); - c->x86_model_id[48] = 0; - return 1; -} - - -static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) -{ - unsigned int n, dummy, eax, ebx, ecx, edx; - - n = c->extended_cpuid_level; - - if (n >= 0x80000005) { - cpuid(0x80000005, &dummy, &ebx, &ecx, &edx); - printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n", - edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); - c->x86_cache_size=(ecx>>24)+(edx>>24); - /* On K8 L1 TLB is inclusive, so don't count it */ - c->x86_tlbsize = 0; - } - - if (n >= 0x80000006) { - cpuid(0x80000006, &dummy, &ebx, &ecx, &edx); - ecx = cpuid_ecx(0x80000006); - c->x86_cache_size = ecx >> 16; - c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff); - - printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n", - c->x86_cache_size, ecx & 0xFF); - } - - if (n >= 0x80000007) - cpuid(0x80000007, &dummy, &dummy, &dummy, &c->x86_power); - if (n >= 0x80000008) { - cpuid(0x80000008, &eax, &dummy, &dummy, &dummy); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - } -} - -#ifdef CONFIG_NUMA -static int nearby_node(int apicid) -{ - int i; - for (i = apicid - 1; i >= 0; i--) { - int node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { - int node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - return first_node(node_online_map); /* Shouldn't happen */ -} -#endif - -/* - * On a AMD dual core setup the lower bits of the APIC id distingush the cores. - * Assumes number of cores is a power of two. - */ -static void __init amd_detect_cmp(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits; -#ifdef CONFIG_NUMA - int cpu = smp_processor_id(); - int node = 0; - unsigned apicid = hard_smp_processor_id(); -#endif - unsigned ecx = cpuid_ecx(0x80000008); - - c->x86_max_cores = (ecx & 0xff) + 1; - - /* CPU telling us the core id bits shift? */ - bits = (ecx >> 12) & 0xF; - - /* Otherwise recompute */ - if (bits == 0) { - while ((1 << bits) < c->x86_max_cores) - bits++; - } - - /* Low order bits define the core id (index of core in socket) */ - c->cpu_core_id = c->phys_proc_id & ((1 << bits)-1); - /* Convert the APIC ID into the socket ID */ - c->phys_proc_id = phys_pkg_id(bits); - -#ifdef CONFIG_NUMA - node = c->phys_proc_id; - if (apicid_to_node[apicid] != NUMA_NO_NODE) - node = apicid_to_node[apicid]; - if (!node_online(node)) { - /* Two possibilities here: - - The CPU is missing memory and no node was created. - In that case try picking one from a nearby CPU - - The APIC IDs differ from the HyperTransport node IDs - which the K8 northbridge parsing fills in. - Assume they are all increased by a constant offset, - but in the same order as the HT nodeids. - If that doesn't result in a usable node fall back to the - path for the previous case. */ - int ht_nodeid = apicid - (cpu_data[0].phys_proc_id << bits); - if (ht_nodeid >= 0 && - apicid_to_node[ht_nodeid] != NUMA_NO_NODE) - node = apicid_to_node[ht_nodeid]; - /* Pick a nearby node */ - if (!node_online(node)) - node = nearby_node(apicid); - } - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -#endif -} - -static void __cpuinit init_amd(struct cpuinfo_x86 *c) -{ - unsigned level; - -#ifdef CONFIG_SMP - unsigned long value; - - /* - * Disable TLB flush filter by setting HWCR.FFDIS on K8 - * bit 6 of msr C001_0015 - * - * Errata 63 for SH-B3 steppings - * Errata 122 for all steppings (F+ have it disabled by default) - */ - if (c->x86 == 15) { - rdmsrl(MSR_K8_HWCR, value); - value |= 1 << 6; - wrmsrl(MSR_K8_HWCR, value); - } -#endif - - /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; - 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ - clear_bit(0*32+31, &c->x86_capability); - - /* On C+ stepping K8 rep microcode works well for copy/memset */ - level = cpuid_eax(1); - if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)) - set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability); - if (c->x86 == 0x10) - set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability); - - /* Enable workaround for FXSAVE leak */ - if (c->x86 >= 6) - set_bit(X86_FEATURE_FXSAVE_LEAK, &c->x86_capability); - - level = get_model_name(c); - if (!level) { - switch (c->x86) { - case 15: - /* Should distinguish Models here, but this is only - a fallback anyways. */ - strcpy(c->x86_model_id, "Hammer"); - break; - } - } - display_cacheinfo(c); - - /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ - if (c->x86_power & (1<<8)) - set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability); - - /* Multi core CPU? */ - if (c->extended_cpuid_level >= 0x80000008) - amd_detect_cmp(c); - - if (c->extended_cpuid_level >= 0x80000006 && - (cpuid_edx(0x80000006) & 0xf000)) - num_cache_leaves = 4; - else - num_cache_leaves = 3; - - if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11) - set_bit(X86_FEATURE_K8, &c->x86_capability); - - /* RDTSC can be speculated around */ - clear_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability); - - /* Family 10 doesn't support C states in MWAIT so don't use it */ - if (c->x86 == 0x10 && !force_mwait) - clear_bit(X86_FEATURE_MWAIT, &c->x86_capability); -} - -static void __cpuinit detect_ht(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - u32 eax, ebx, ecx, edx; - int index_msb, core_bits; - - cpuid(1, &eax, &ebx, &ecx, &edx); - - - if (!cpu_has(c, X86_FEATURE_HT)) - return; - if (cpu_has(c, X86_FEATURE_CMP_LEGACY)) - goto out; - - smp_num_siblings = (ebx & 0xff0000) >> 16; - - if (smp_num_siblings == 1) { - printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); - } else if (smp_num_siblings > 1 ) { - - if (smp_num_siblings > NR_CPUS) { - printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings); - smp_num_siblings = 1; - return; - } - - index_msb = get_count_order(smp_num_siblings); - c->phys_proc_id = phys_pkg_id(index_msb); - - smp_num_siblings = smp_num_siblings / c->x86_max_cores; - - index_msb = get_count_order(smp_num_siblings) ; - - core_bits = get_count_order(c->x86_max_cores); - - c->cpu_core_id = phys_pkg_id(index_msb) & - ((1 << core_bits) - 1); - } -out: - if ((c->x86_max_cores * smp_num_siblings) > 1) { - printk(KERN_INFO "CPU: Physical Processor ID: %d\n", c->phys_proc_id); - printk(KERN_INFO "CPU: Processor Core ID: %d\n", c->cpu_core_id); - } - -#endif -} - -/* - * find out the number of processor cores on the die - */ -static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) -{ - unsigned int eax, t; - - if (c->cpuid_level < 4) - return 1; - - cpuid_count(4, 0, &eax, &t, &t, &t); - - if (eax & 0x1f) - return ((eax >> 26) + 1); - else - return 1; -} - -static void srat_detect_node(void) -{ -#ifdef CONFIG_NUMA - unsigned node; - int cpu = smp_processor_id(); - int apicid = hard_smp_processor_id(); - - /* Don't do the funky fallback heuristics the AMD version employs - for now. */ - node = apicid_to_node[apicid]; - if (node == NUMA_NO_NODE) - node = first_node(node_online_map); - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -} - -static void __cpuinit init_intel(struct cpuinfo_x86 *c) -{ - /* Cache sizes */ - unsigned n; - - init_intel_cacheinfo(c); - if (c->cpuid_level > 9 ) { - unsigned eax = cpuid_eax(10); - /* Check for version and the number of counters */ - if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) - set_bit(X86_FEATURE_ARCH_PERFMON, &c->x86_capability); - } - - if (cpu_has_ds) { - unsigned int l1, l2; - rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); - if (!(l1 & (1<<11))) - set_bit(X86_FEATURE_BTS, c->x86_capability); - if (!(l1 & (1<<12))) - set_bit(X86_FEATURE_PEBS, c->x86_capability); - } - - n = c->extended_cpuid_level; - if (n >= 0x80000008) { - unsigned eax = cpuid_eax(0x80000008); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - /* CPUID workaround for Intel 0F34 CPU */ - if (c->x86_vendor == X86_VENDOR_INTEL && - c->x86 == 0xF && c->x86_model == 0x3 && - c->x86_mask == 0x4) - c->x86_phys_bits = 36; - } - - if (c->x86 == 15) - c->x86_cache_alignment = c->x86_clflush_size * 2; - if ((c->x86 == 0xf && c->x86_model >= 0x03) || - (c->x86 == 0x6 && c->x86_model >= 0x0e)) - set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability); - if (c->x86 == 6) - set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability); - if (c->x86 == 15) - set_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability); - else - clear_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability); - c->x86_max_cores = intel_num_cpu_cores(c); - - srat_detect_node(); -} - -static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) -{ - char *v = c->x86_vendor_id; - - if (!strcmp(v, "AuthenticAMD")) - c->x86_vendor = X86_VENDOR_AMD; - else if (!strcmp(v, "GenuineIntel")) - c->x86_vendor = X86_VENDOR_INTEL; - else - c->x86_vendor = X86_VENDOR_UNKNOWN; -} - -struct cpu_model_info { - int vendor; - int family; - char *model_names[16]; -}; - -/* Do some early cpuid on the boot CPU to get some parameter that are - needed before check_bugs. Everything advanced is in identify_cpu - below. */ -void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) -{ - u32 tfms; - - c->loops_per_jiffy = loops_per_jiffy; - c->x86_cache_size = -1; - c->x86_vendor = X86_VENDOR_UNKNOWN; - c->x86_model = c->x86_mask = 0; /* So far unknown... */ - c->x86_vendor_id[0] = '\0'; /* Unset */ - c->x86_model_id[0] = '\0'; /* Unset */ - c->x86_clflush_size = 64; - c->x86_cache_alignment = c->x86_clflush_size; - c->x86_max_cores = 1; - c->extended_cpuid_level = 0; - memset(&c->x86_capability, 0, sizeof c->x86_capability); - - /* Get vendor name */ - cpuid(0x00000000, (unsigned int *)&c->cpuid_level, - (unsigned int *)&c->x86_vendor_id[0], - (unsigned int *)&c->x86_vendor_id[8], - (unsigned int *)&c->x86_vendor_id[4]); - - get_cpu_vendor(c); - - /* Initialize the standard set of capabilities */ - /* Note that the vendor-specific code below might override */ - - /* Intel-defined flags: level 0x00000001 */ - if (c->cpuid_level >= 0x00000001) { - __u32 misc; - cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4], - &c->x86_capability[0]); - c->x86 = (tfms >> 8) & 0xf; - c->x86_model = (tfms >> 4) & 0xf; - c->x86_mask = tfms & 0xf; - if (c->x86 == 0xf) - c->x86 += (tfms >> 20) & 0xff; - if (c->x86 >= 0x6) - c->x86_model += ((tfms >> 16) & 0xF) << 4; - if (c->x86_capability[0] & (1<<19)) - c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; - } else { - /* Have CPUID level 0 only - unheard of */ - c->x86 = 4; - } - -#ifdef CONFIG_SMP - c->phys_proc_id = (cpuid_ebx(1) >> 24) & 0xff; -#endif -} - -/* - * This does the hard work of actually picking apart the CPU stuff... - */ -void __cpuinit identify_cpu(struct cpuinfo_x86 *c) -{ - int i; - u32 xlvl; - - early_identify_cpu(c); - - /* AMD-defined flags: level 0x80000001 */ - xlvl = cpuid_eax(0x80000000); - c->extended_cpuid_level = xlvl; - if ((xlvl & 0xffff0000) == 0x80000000) { - if (xlvl >= 0x80000001) { - c->x86_capability[1] = cpuid_edx(0x80000001); - c->x86_capability[6] = cpuid_ecx(0x80000001); - } - if (xlvl >= 0x80000004) - get_model_name(c); /* Default name */ - } - - /* Transmeta-defined flags: level 0x80860001 */ - xlvl = cpuid_eax(0x80860000); - if ((xlvl & 0xffff0000) == 0x80860000) { - /* Don't set x86_cpuid_level here for now to not confuse. */ - if (xlvl >= 0x80860001) - c->x86_capability[2] = cpuid_edx(0x80860001); - } - - init_scattered_cpuid_features(c); - - c->apicid = phys_pkg_id(0); - - /* - * Vendor-specific initialization. In this section we - * canonicalize the feature flags, meaning if there are - * features a certain CPU supports which CPUID doesn't - * tell us, CPUID claiming incorrect flags, or other bugs, - * we handle them here. - * - * At the end of this section, c->x86_capability better - * indicate the features this CPU genuinely supports! - */ - switch (c->x86_vendor) { - case X86_VENDOR_AMD: - init_amd(c); - break; - - case X86_VENDOR_INTEL: - init_intel(c); - break; - - case X86_VENDOR_UNKNOWN: - default: - display_cacheinfo(c); - break; - } - - select_idle_routine(c); - detect_ht(c); - - /* - * On SMP, boot_cpu_data holds the common feature set between - * all CPUs; so make sure that we indicate which features are - * common between the CPUs. The first time this routine gets - * executed, c == &boot_cpu_data. - */ - if (c != &boot_cpu_data) { - /* AND the already accumulated flags with these */ - for (i = 0 ; i < NCAPINTS ; i++) - boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; - } - -#ifdef CONFIG_X86_MCE - mcheck_init(c); -#endif - if (c != &boot_cpu_data) - mtrr_ap_init(); -#ifdef CONFIG_NUMA - numa_add_cpu(smp_processor_id()); -#endif -} - - -void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) -{ - if (c->x86_model_id[0]) - printk("%s", c->x86_model_id); - - if (c->x86_mask || c->cpuid_level >= 0) - printk(" stepping %02x\n", c->x86_mask); - else - printk("\n"); -} - -/* - * Get CPU information for use by the procfs. - */ - -static int show_cpuinfo(struct seq_file *m, void *v) -{ - struct cpuinfo_x86 *c = v; - - /* - * These flag bits must match the definitions in <asm/cpufeature.h>. - * NULL means this bit is undefined or reserved; either way it doesn't - * have meaning as far as Linux is concerned. Note that it's important - * to realize there is a difference between this table and CPUID -- if - * applications want to get the raw CPUID data, they should access - * /dev/cpu/<cpu_nr>/cpuid instead. - */ - static char *x86_cap_flags[] = { - /* Intel-defined */ - "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce", - "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov", - "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx", - "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe", - - /* AMD-defined */ - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, "nx", NULL, "mmxext", NULL, - NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", - "3dnowext", "3dnow", - - /* Transmeta-defined */ - "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - - /* Other (Linux-defined) */ - "cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr", - NULL, NULL, NULL, NULL, - "constant_tsc", "up", NULL, "arch_perfmon", - "pebs", "bts", NULL, "sync_rdtsc", - "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - - /* Intel-defined (#2) */ - "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", - "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, - NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt", - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - - /* VIA/Cyrix/Centaur-defined */ - NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en", - "ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - - /* AMD-defined (#2) */ - "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy", - "altmovcr8", "abm", "sse4a", - "misalignsse", "3dnowprefetch", - "osvw", "ibs", NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - - /* Auxiliary (Linux-defined) */ - "ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, - }; - static char *x86_power_flags[] = { - "ts", /* temperature sensor */ - "fid", /* frequency id control */ - "vid", /* voltage id control */ - "ttp", /* thermal trip */ - "tm", - "stc", - "100mhzsteps", - "hwpstate", - "", /* tsc invariant mapped to constant_tsc */ - /* nothing */ - }; - - -#ifdef CONFIG_SMP - if (!cpu_online(c-cpu_data)) - return 0; -#endif - - seq_printf(m,"processor\t: %u\n" - "vendor_id\t: %s\n" - "cpu family\t: %d\n" - "model\t\t: %d\n" - "model name\t: %s\n", - (unsigned)(c-cpu_data), - c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown", - c->x86, - (int)c->x86_model, - c->x86_model_id[0] ? c->x86_model_id : "unknown"); - - if (c->x86_mask || c->cpuid_level >= 0) - seq_printf(m, "stepping\t: %d\n", c->x86_mask); - else - seq_printf(m, "stepping\t: unknown\n"); - - if (cpu_has(c,X86_FEATURE_TSC)) { - unsigned int freq = cpufreq_quick_get((unsigned)(c-cpu_data)); - if (!freq) - freq = cpu_khz; - seq_printf(m, "cpu MHz\t\t: %u.%03u\n", - freq / 1000, (freq % 1000)); - } - - /* Cache size */ - if (c->x86_cache_size >= 0) - seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size); - -#ifdef CONFIG_SMP - if (smp_num_siblings * c->x86_max_cores > 1) { - int cpu = c - cpu_data; - seq_printf(m, "physical id\t: %d\n", c->phys_proc_id); - seq_printf(m, "siblings\t: %d\n", cpus_weight(cpu_core_map[cpu])); - seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id); - seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); - } -#endif - - seq_printf(m, - "fpu\t\t: yes\n" - "fpu_exception\t: yes\n" - "cpuid level\t: %d\n" - "wp\t\t: yes\n" - "flags\t\t:", - c->cpuid_level); - - { - int i; - for ( i = 0 ; i < 32*NCAPINTS ; i++ ) - if (cpu_has(c, i) && x86_cap_flags[i] != NULL) - seq_printf(m, " %s", x86_cap_flags[i]); - } - - seq_printf(m, "\nbogomips\t: %lu.%02lu\n", - c->loops_per_jiffy/(500000/HZ), - (c->loops_per_jiffy/(5000/HZ)) % 100); - - if (c->x86_tlbsize > 0) - seq_printf(m, "TLB size\t: %d 4K pages\n", c->x86_tlbsize); - seq_printf(m, "clflush size\t: %d\n", c->x86_clflush_size); - seq_printf(m, "cache_alignment\t: %d\n", c->x86_cache_alignment); - - seq_printf(m, "address sizes\t: %u bits physical, %u bits virtual\n", - c->x86_phys_bits, c->x86_virt_bits); - - seq_printf(m, "power management:"); - { - unsigned i; - for (i = 0; i < 32; i++) - if (c->x86_power & (1 << i)) { - if (i < ARRAY_SIZE(x86_power_flags) && - x86_power_flags[i]) - seq_printf(m, "%s%s", - x86_power_flags[i][0]?" ":"", - x86_power_flags[i]); - else - seq_printf(m, " [%d]", i); - } - } - - seq_printf(m, "\n\n"); - - return 0; -} - -static void *c_start(struct seq_file *m, loff_t *pos) -{ - return *pos < NR_CPUS ? cpu_data + *pos : NULL; -} - -static void *c_next(struct seq_file *m, void *v, loff_t *pos) -{ - ++*pos; - return c_start(m, pos); -} - -static void c_stop(struct seq_file *m, void *v) -{ -} - -struct seq_operations cpuinfo_op = { - .start =c_start, - .next = c_next, - .stop = c_stop, - .show = show_cpuinfo, -}; diff --git a/arch/x86_64/kernel/signal_64.c b/arch/x86_64/kernel/signal_64.c deleted file mode 100644 index 739175b01e0..00000000000 --- a/arch/x86_64/kernel/signal_64.c +++ /dev/null @@ -1,495 +0,0 @@ -/* - * linux/arch/x86_64/kernel/signal.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs - * - * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson - * 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes - * 2000-2002 x86-64 support by Andi Kleen - */ - -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/errno.h> -#include <linux/wait.h> -#include <linux/ptrace.h> -#include <linux/unistd.h> -#include <linux/stddef.h> -#include <linux/personality.h> -#include <linux/compiler.h> -#include <asm/ucontext.h> -#include <asm/uaccess.h> -#include <asm/i387.h> -#include <asm/proto.h> -#include <asm/ia32_unistd.h> -#include <asm/mce.h> - -/* #define DEBUG_SIG 1 */ - -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - -int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, - sigset_t *set, struct pt_regs * regs); -int ia32_setup_frame(int sig, struct k_sigaction *ka, - sigset_t *set, struct pt_regs * regs); - -asmlinkage long -sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, - struct pt_regs *regs) -{ - return do_sigaltstack(uss, uoss, regs->rsp); -} - - -/* - * Do a signal return; undo the signal stack. - */ - -struct rt_sigframe -{ - char __user *pretcode; - struct ucontext uc; - struct siginfo info; -}; - -static int -restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, unsigned long *prax) -{ - unsigned int err = 0; - - /* Always make any pending restarted system calls return -EINTR */ - current_thread_info()->restart_block.fn = do_no_restart_syscall; - -#define COPY(x) err |= __get_user(regs->x, &sc->x) - - COPY(rdi); COPY(rsi); COPY(rbp); COPY(rsp); COPY(rbx); - COPY(rdx); COPY(rcx); COPY(rip); - COPY(r8); - COPY(r9); - COPY(r10); - COPY(r11); - COPY(r12); - COPY(r13); - COPY(r14); - COPY(r15); - - /* Kernel saves and restores only the CS segment register on signals, - * which is the bare minimum needed to allow mixed 32/64-bit code. - * App's signal handler can save/restore other segments if needed. */ - { - unsigned cs; - err |= __get_user(cs, &sc->cs); - regs->cs = cs | 3; /* Force into user mode */ - } - - { - unsigned int tmpflags; - err |= __get_user(tmpflags, &sc->eflags); - regs->eflags = (regs->eflags & ~0x40DD5) | (tmpflags & 0x40DD5); - regs->orig_rax = -1; /* disable syscall checks */ - } - - { - struct _fpstate __user * buf; - err |= __get_user(buf, &sc->fpstate); - - if (buf) { - if (!access_ok(VERIFY_READ, buf, sizeof(*buf))) - goto badframe; - err |= restore_i387(buf); - } else { - struct task_struct *me = current; - if (used_math()) { - clear_fpu(me); - clear_used_math(); - } - } - } - - err |= __get_user(*prax, &sc->rax); - return err; - -badframe: - return 1; -} - -asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) -{ - struct rt_sigframe __user *frame; - sigset_t set; - unsigned long eax; - - frame = (struct rt_sigframe __user *)(regs->rsp - 8); - if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) { - goto badframe; - } - if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) { - goto badframe; - } - - sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &eax)) - goto badframe; - -#ifdef DEBUG_SIG - printk("%d sigreturn rip:%lx rsp:%lx frame:%p rax:%lx\n",current->pid,regs->rip,regs->rsp,frame,eax); -#endif - - if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->rsp) == -EFAULT) - goto badframe; - - return eax; - -badframe: - signal_fault(regs,frame,"sigreturn"); - return 0; -} - -/* - * Set up a signal frame. - */ - -static inline int -setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned long mask, struct task_struct *me) -{ - int err = 0; - - err |= __put_user(regs->cs, &sc->cs); - err |= __put_user(0, &sc->gs); - err |= __put_user(0, &sc->fs); - - err |= __put_user(regs->rdi, &sc->rdi); - err |= __put_user(regs->rsi, &sc->rsi); - err |= __put_user(regs->rbp, &sc->rbp); - err |= __put_user(regs->rsp, &sc->rsp); - err |= __put_user(regs->rbx, &sc->rbx); - err |= __put_user(regs->rdx, &sc->rdx); - err |= __put_user(regs->rcx, &sc->rcx); - err |= __put_user(regs->rax, &sc->rax); - err |= __put_user(regs->r8, &sc->r8); - err |= __put_user(regs->r9, &sc->r9); - err |= __put_user(regs->r10, &sc->r10); - err |= __put_user(regs->r11, &sc->r11); - err |= __put_user(regs->r12, &sc->r12); - err |= __put_user(regs->r13, &sc->r13); - err |= __put_user(regs->r14, &sc->r14); - err |= __put_user(regs->r15, &sc->r15); - err |= __put_user(me->thread.trap_no, &sc->trapno); - err |= __put_user(me->thread.error_code, &sc->err); - err |= __put_user(regs->rip, &sc->rip); - err |= __put_user(regs->eflags, &sc->eflags); - err |= __put_user(mask, &sc->oldmask); - err |= __put_user(me->thread.cr2, &sc->cr2); - - return err; -} - -/* - * Determine which stack to use.. - */ - -static void __user * -get_stack(struct k_sigaction *ka, struct pt_regs *regs, unsigned long size) -{ - unsigned long rsp; - - /* Default to using normal stack - redzone*/ - rsp = regs->rsp - 128; - - /* This is the X/Open sanctioned signal stack switching. */ - if (ka->sa.sa_flags & SA_ONSTACK) { - if (sas_ss_flags(rsp) == 0) - rsp = current->sas_ss_sp + current->sas_ss_size; - } - - return (void __user *)round_down(rsp - size, 16); -} - -static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, - sigset_t *set, struct pt_regs * regs) -{ - struct rt_sigframe __user *frame; - struct _fpstate __user *fp = NULL; - int err = 0; - struct task_struct *me = current; - - if (used_math()) { - fp = get_stack(ka, regs, sizeof(struct _fpstate)); - frame = (void __user *)round_down( - (unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8; - - if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate))) - goto give_sigsegv; - - if (save_i387(fp) < 0) - err |= -1; - } else - frame = get_stack(ka, regs, sizeof(struct rt_sigframe)) - 8; - - if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) - goto give_sigsegv; - - if (ka->sa.sa_flags & SA_SIGINFO) { - err |= copy_siginfo_to_user(&frame->info, info); - if (err) - goto give_sigsegv; - } - - /* Create the ucontext. */ - err |= __put_user(0, &frame->uc.uc_flags); - err |= __put_user(0, &frame->uc.uc_link); - err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp); - err |= __put_user(sas_ss_flags(regs->rsp), - &frame->uc.uc_stack.ss_flags); - err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size); - err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0], me); - err |= __put_user(fp, &frame->uc.uc_mcontext.fpstate); - if (sizeof(*set) == 16) { - __put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]); - __put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]); - } else - err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); - - /* Set up to return from userspace. If provided, use a stub - already in userspace. */ - /* x86-64 should always use SA_RESTORER. */ - if (ka->sa.sa_flags & SA_RESTORER) { - err |= __put_user(ka->sa.sa_restorer, &frame->pretcode); - } else { - /* could use a vstub here */ - goto give_sigsegv; - } - - if (err) - goto give_sigsegv; - -#ifdef DEBUG_SIG - printk("%d old rip %lx old rsp %lx old rax %lx\n", current->pid,regs->rip,regs->rsp,regs->rax); -#endif - - /* Set up registers for signal handler */ - regs->rdi = sig; - /* In case the signal handler was declared without prototypes */ - regs->rax = 0; - - /* This also works for non SA_SIGINFO handlers because they expect the - next argument after the signal number on the stack. */ - regs->rsi = (unsigned long)&frame->info; - regs->rdx = (unsigned long)&frame->uc; - regs->rip = (unsigned long) ka->sa.sa_handler; - - regs->rsp = (unsigned long)frame; - - /* Set up the CS register to run signal handlers in 64-bit mode, - even if the handler happens to be interrupting 32-bit code. */ - regs->cs = __USER_CS; - - /* This, by contrast, has nothing to do with segment registers - - see include/asm-x86_64/uaccess.h for details. */ - set_fs(USER_DS); - - regs->eflags &= ~TF_MASK; - if (test_thread_flag(TIF_SINGLESTEP)) - ptrace_notify(SIGTRAP); -#ifdef DEBUG_SIG - printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%p\n", - current->comm, current->pid, frame, regs->rip, frame->pretcode); -#endif - - return 0; - -give_sigsegv: - force_sigsegv(sig, current); - return -EFAULT; -} - -/* - * OK, we're invoking a handler - */ - -static int -handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, - sigset_t *oldset, struct pt_regs *regs) -{ - int ret; - -#ifdef DEBUG_SIG - printk("handle_signal pid:%d sig:%lu rip:%lx rsp:%lx regs=%p\n", - current->pid, sig, - regs->rip, regs->rsp, regs); -#endif - - /* Are we from a system call? */ - if ((long)regs->orig_rax >= 0) { - /* If so, check system call restarting.. */ - switch (regs->rax) { - case -ERESTART_RESTARTBLOCK: - case -ERESTARTNOHAND: - regs->rax = -EINTR; - break; - - case -ERESTARTSYS: - if (!(ka->sa.sa_flags & SA_RESTART)) { - regs->rax = -EINTR; - break; - } - /* fallthrough */ - case -ERESTARTNOINTR: - regs->rax = regs->orig_rax; - regs->rip -= 2; - break; - } - } - - /* - * If TF is set due to a debugger (PT_DTRACE), clear the TF - * flag so that register information in the sigcontext is - * correct. - */ - if (unlikely(regs->eflags & TF_MASK)) { - if (likely(current->ptrace & PT_DTRACE)) { - current->ptrace &= ~PT_DTRACE; - regs->eflags &= ~TF_MASK; - } - } - -#ifdef CONFIG_IA32_EMULATION - if (test_thread_flag(TIF_IA32)) { - if (ka->sa.sa_flags & SA_SIGINFO) - ret = ia32_setup_rt_frame(sig, ka, info, oldset, regs); - else - ret = ia32_setup_frame(sig, ka, oldset, regs); - } else -#endif - ret = setup_rt_frame(sig, ka, info, oldset, regs); - - if (ret == 0) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } - - return ret; -} - -/* - * Note that 'init' is a special process: it doesn't get signals it doesn't - * want to handle. Thus you cannot kill init even with a SIGKILL even by - * mistake. - */ -static void do_signal(struct pt_regs *regs) -{ - struct k_sigaction ka; - siginfo_t info; - int signr; - sigset_t *oldset; - - /* - * We want the common case to go fast, which - * is why we may in certain cases get here from - * kernel mode. Just return without doing anything - * if so. - */ - if (!user_mode(regs)) - return; - - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - oldset = ¤t->saved_sigmask; - else - oldset = ¤t->blocked; - - signr = get_signal_to_deliver(&info, &ka, regs, NULL); - if (signr > 0) { - /* Reenable any watchpoints before delivering the - * signal to user space. The processor register will - * have been cleared if the watchpoint triggered - * inside the kernel. - */ - if (current->thread.debugreg7) - set_debugreg(current->thread.debugreg7, 7); - - /* Whee! Actually deliver the signal. */ - if (handle_signal(signr, &info, &ka, oldset, regs) == 0) { - /* a signal was successfully delivered; the saved - * sigmask will have been stored in the signal frame, - * and will be restored by sigreturn, so we can simply - * clear the TIF_RESTORE_SIGMASK flag */ - clear_thread_flag(TIF_RESTORE_SIGMASK); - } - return; - } - - /* Did we come from a system call? */ - if ((long)regs->orig_rax >= 0) { - /* Restart the system call - no handlers present */ - long res = regs->rax; - switch (res) { - case -ERESTARTNOHAND: - case -ERESTARTSYS: - case -ERESTARTNOINTR: - regs->rax = regs->orig_rax; - regs->rip -= 2; - break; - case -ERESTART_RESTARTBLOCK: - regs->rax = test_thread_flag(TIF_IA32) ? - __NR_ia32_restart_syscall : - __NR_restart_syscall; - regs->rip -= 2; - break; - } - } - - /* if there's no signal to deliver, we just put the saved sigmask - back. */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) { - clear_thread_flag(TIF_RESTORE_SIGMASK); - sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); - } -} - -void -do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags) -{ -#ifdef DEBUG_SIG - printk("do_notify_resume flags:%x rip:%lx rsp:%lx caller:%p pending:%x\n", - thread_info_flags, regs->rip, regs->rsp, __builtin_return_address(0),signal_pending(current)); -#endif - - /* Pending single-step? */ - if (thread_info_flags & _TIF_SINGLESTEP) { - regs->eflags |= TF_MASK; - clear_thread_flag(TIF_SINGLESTEP); - } - -#ifdef CONFIG_X86_MCE - /* notify userspace of pending MCEs */ - if (thread_info_flags & _TIF_MCE_NOTIFY) - mce_notify_user(); -#endif /* CONFIG_X86_MCE */ - - /* deal with pending signal delivery */ - if (thread_info_flags & (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK)) - do_signal(regs); -} - -void signal_fault(struct pt_regs *regs, void __user *frame, char *where) -{ - struct task_struct *me = current; - if (show_unhandled_signals && printk_ratelimit()) - printk("%s[%d] bad frame in %s frame:%p rip:%lx rsp:%lx orax:%lx\n", - me->comm,me->pid,where,frame,regs->rip,regs->rsp,regs->orig_rax); - - force_sig(SIGSEGV, me); -} diff --git a/arch/x86_64/kernel/smp_64.c b/arch/x86_64/kernel/smp_64.c deleted file mode 100644 index df4a82812ad..00000000000 --- a/arch/x86_64/kernel/smp_64.c +++ /dev/null @@ -1,523 +0,0 @@ -/* - * Intel SMP support routines. - * - * (c) 1995 Alan Cox, Building #3 <alan@redhat.com> - * (c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com> - * (c) 2002,2003 Andi Kleen, SuSE Labs. - * - * This code is released under the GNU General Public License version 2 or - * later. - */ - -#include <linux/init.h> - -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/smp.h> -#include <linux/kernel_stat.h> -#include <linux/mc146818rtc.h> -#include <linux/interrupt.h> - -#include <asm/mtrr.h> -#include <asm/pgalloc.h> -#include <asm/tlbflush.h> -#include <asm/mach_apic.h> -#include <asm/mmu_context.h> -#include <asm/proto.h> -#include <asm/apicdef.h> -#include <asm/idle.h> - -/* - * Smarter SMP flushing macros. - * c/o Linus Torvalds. - * - * These mean you can really definitely utterly forget about - * writing to user space from interrupts. (Its not allowed anyway). - * - * Optimizations Manfred Spraul <manfred@colorfullife.com> - * - * More scalable flush, from Andi Kleen - * - * To avoid global state use 8 different call vectors. - * Each CPU uses a specific vector to trigger flushes on other - * CPUs. Depending on the received vector the target CPUs look into - * the right per cpu variable for the flush data. - * - * With more than 8 CPUs they are hashed to the 8 available - * vectors. The limited global vector space forces us to this right now. - * In future when interrupts are split into per CPU domains this could be - * fixed, at the cost of triggering multiple IPIs in some cases. - */ - -union smp_flush_state { - struct { - cpumask_t flush_cpumask; - struct mm_struct *flush_mm; - unsigned long flush_va; -#define FLUSH_ALL -1ULL - spinlock_t tlbstate_lock; - }; - char pad[SMP_CACHE_BYTES]; -} ____cacheline_aligned; - -/* State is put into the per CPU data section, but padded - to a full cache line because other CPUs can access it and we don't - want false sharing in the per cpu data segment. */ -static DEFINE_PER_CPU(union smp_flush_state, flush_state); - -/* - * We cannot call mmdrop() because we are in interrupt context, - * instead update mm->cpu_vm_mask. - */ -static inline void leave_mm(int cpu) -{ - if (read_pda(mmu_state) == TLBSTATE_OK) - BUG(); - cpu_clear(cpu, read_pda(active_mm)->cpu_vm_mask); - load_cr3(swapper_pg_dir); -} - -/* - * - * The flush IPI assumes that a thread switch happens in this order: - * [cpu0: the cpu that switches] - * 1) switch_mm() either 1a) or 1b) - * 1a) thread switch to a different mm - * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask); - * Stop ipi delivery for the old mm. This is not synchronized with - * the other cpus, but smp_invalidate_interrupt ignore flush ipis - * for the wrong mm, and in the worst case we perform a superfluous - * tlb flush. - * 1a2) set cpu mmu_state to TLBSTATE_OK - * Now the smp_invalidate_interrupt won't call leave_mm if cpu0 - * was in lazy tlb mode. - * 1a3) update cpu active_mm - * Now cpu0 accepts tlb flushes for the new mm. - * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask); - * Now the other cpus will send tlb flush ipis. - * 1a4) change cr3. - * 1b) thread switch without mm change - * cpu active_mm is correct, cpu0 already handles - * flush ipis. - * 1b1) set cpu mmu_state to TLBSTATE_OK - * 1b2) test_and_set the cpu bit in cpu_vm_mask. - * Atomically set the bit [other cpus will start sending flush ipis], - * and test the bit. - * 1b3) if the bit was 0: leave_mm was called, flush the tlb. - * 2) switch %%esp, ie current - * - * The interrupt must handle 2 special cases: - * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm. - * - the cpu performs speculative tlb reads, i.e. even if the cpu only - * runs in kernel space, the cpu could load tlb entries for user space - * pages. - * - * The good news is that cpu mmu_state is local to each cpu, no - * write/read ordering problems. - */ - -/* - * TLB flush IPI: - * - * 1) Flush the tlb entries if the cpu uses the mm that's being flushed. - * 2) Leave the mm if we are in the lazy tlb mode. - * - * Interrupts are disabled. - */ - -asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs) -{ - int cpu; - int sender; - union smp_flush_state *f; - - cpu = smp_processor_id(); - /* - * orig_rax contains the negated interrupt vector. - * Use that to determine where the sender put the data. - */ - sender = ~regs->orig_rax - INVALIDATE_TLB_VECTOR_START; - f = &per_cpu(flush_state, sender); - - if (!cpu_isset(cpu, f->flush_cpumask)) - goto out; - /* - * This was a BUG() but until someone can quote me the - * line from the intel manual that guarantees an IPI to - * multiple CPUs is retried _only_ on the erroring CPUs - * its staying as a return - * - * BUG(); - */ - - if (f->flush_mm == read_pda(active_mm)) { - if (read_pda(mmu_state) == TLBSTATE_OK) { - if (f->flush_va == FLUSH_ALL) - local_flush_tlb(); - else - __flush_tlb_one(f->flush_va); - } else - leave_mm(cpu); - } -out: - ack_APIC_irq(); - cpu_clear(cpu, f->flush_cpumask); -} - -static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, - unsigned long va) -{ - int sender; - union smp_flush_state *f; - - /* Caller has disabled preemption */ - sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS; - f = &per_cpu(flush_state, sender); - - /* Could avoid this lock when - num_online_cpus() <= NUM_INVALIDATE_TLB_VECTORS, but it is - probably not worth checking this for a cache-hot lock. */ - spin_lock(&f->tlbstate_lock); - - f->flush_mm = mm; - f->flush_va = va; - cpus_or(f->flush_cpumask, cpumask, f->flush_cpumask); - - /* - * We have to send the IPI only to - * CPUs affected. - */ - send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR_START + sender); - - while (!cpus_empty(f->flush_cpumask)) - cpu_relax(); - - f->flush_mm = NULL; - f->flush_va = 0; - spin_unlock(&f->tlbstate_lock); -} - -int __cpuinit init_smp_flush(void) -{ - int i; - for_each_cpu_mask(i, cpu_possible_map) { - spin_lock_init(&per_cpu(flush_state, i).tlbstate_lock); - } - return 0; -} - -core_initcall(init_smp_flush); - -void flush_tlb_current_task(void) -{ - struct mm_struct *mm = current->mm; - cpumask_t cpu_mask; - - preempt_disable(); - cpu_mask = mm->cpu_vm_mask; - cpu_clear(smp_processor_id(), cpu_mask); - - local_flush_tlb(); - if (!cpus_empty(cpu_mask)) - flush_tlb_others(cpu_mask, mm, FLUSH_ALL); - preempt_enable(); -} -EXPORT_SYMBOL(flush_tlb_current_task); - -void flush_tlb_mm (struct mm_struct * mm) -{ - cpumask_t cpu_mask; - - preempt_disable(); - cpu_mask = mm->cpu_vm_mask; - cpu_clear(smp_processor_id(), cpu_mask); - - if (current->active_mm == mm) { - if (current->mm) - local_flush_tlb(); - else - leave_mm(smp_processor_id()); - } - if (!cpus_empty(cpu_mask)) - flush_tlb_others(cpu_mask, mm, FLUSH_ALL); - - preempt_enable(); -} -EXPORT_SYMBOL(flush_tlb_mm); - -void flush_tlb_page(struct vm_area_struct * vma, unsigned long va) -{ - struct mm_struct *mm = vma->vm_mm; - cpumask_t cpu_mask; - - preempt_disable(); - cpu_mask = mm->cpu_vm_mask; - cpu_clear(smp_processor_id(), cpu_mask); - - if (current->active_mm == mm) { - if(current->mm) - __flush_tlb_one(va); - else - leave_mm(smp_processor_id()); - } - - if (!cpus_empty(cpu_mask)) - flush_tlb_others(cpu_mask, mm, va); - - preempt_enable(); -} -EXPORT_SYMBOL(flush_tlb_page); - -static void do_flush_tlb_all(void* info) -{ - unsigned long cpu = smp_processor_id(); - - __flush_tlb_all(); - if (read_pda(mmu_state) == TLBSTATE_LAZY) - leave_mm(cpu); -} - -void flush_tlb_all(void) -{ - on_each_cpu(do_flush_tlb_all, NULL, 1, 1); -} - -/* - * this function sends a 'reschedule' IPI to another CPU. - * it goes straight through and wastes no time serializing - * anything. Worst case is that we lose a reschedule ... - */ - -void smp_send_reschedule(int cpu) -{ - send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR); -} - -/* - * Structure and data for smp_call_function(). This is designed to minimise - * static memory requirements. It also looks cleaner. - */ -static DEFINE_SPINLOCK(call_lock); - -struct call_data_struct { - void (*func) (void *info); - void *info; - atomic_t started; - atomic_t finished; - int wait; -}; - -static struct call_data_struct * call_data; - -void lock_ipi_call_lock(void) -{ - spin_lock_irq(&call_lock); -} - -void unlock_ipi_call_lock(void) -{ - spin_unlock_irq(&call_lock); -} - -/* - * this function sends a 'generic call function' IPI to one other CPU - * in the system. - * - * cpu is a standard Linux logical CPU number. - */ -static void -__smp_call_function_single(int cpu, void (*func) (void *info), void *info, - int nonatomic, int wait) -{ - struct call_data_struct data; - int cpus = 1; - - data.func = func; - data.info = info; - atomic_set(&data.started, 0); - data.wait = wait; - if (wait) - atomic_set(&data.finished, 0); - - call_data = &data; - wmb(); - /* Send a message to all other CPUs and wait for them to respond */ - send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNCTION_VECTOR); - - /* Wait for response */ - while (atomic_read(&data.started) != cpus) - cpu_relax(); - - if (!wait) - return; - - while (atomic_read(&data.finished) != cpus) - cpu_relax(); -} - -/* - * smp_call_function_single - Run a function on a specific CPU - * @func: The function to run. This must be fast and non-blocking. - * @info: An arbitrary pointer to pass to the function. - * @nonatomic: Currently unused. - * @wait: If true, wait until function has completed on other CPUs. - * - * Retrurns 0 on success, else a negative status code. - * - * Does not return until the remote CPU is nearly ready to execute <func> - * or is or has executed. - */ - -int smp_call_function_single (int cpu, void (*func) (void *info), void *info, - int nonatomic, int wait) -{ - /* prevent preemption and reschedule on another processor */ - int me = get_cpu(); - - /* Can deadlock when called with interrupts disabled */ - WARN_ON(irqs_disabled()); - - if (cpu == me) { - local_irq_disable(); - func(info); - local_irq_enable(); - put_cpu(); - return 0; - } - - spin_lock(&call_lock); - __smp_call_function_single(cpu, func, info, nonatomic, wait); - spin_unlock(&call_lock); - put_cpu(); - return 0; -} -EXPORT_SYMBOL(smp_call_function_single); - -/* - * this function sends a 'generic call function' IPI to all other CPUs - * in the system. - */ -static void __smp_call_function (void (*func) (void *info), void *info, - int nonatomic, int wait) -{ - struct call_data_struct data; - int cpus = num_online_cpus()-1; - - if (!cpus) - return; - - data.func = func; - data.info = info; - atomic_set(&data.started, 0); - data.wait = wait; - if (wait) - atomic_set(&data.finished, 0); - - call_data = &data; - wmb(); - /* Send a message to all other CPUs and wait for them to respond */ - send_IPI_allbutself(CALL_FUNCTION_VECTOR); - - /* Wait for response */ - while (atomic_read(&data.started) != cpus) - cpu_relax(); - - if (!wait) - return; - - while (atomic_read(&data.finished) != cpus) - cpu_relax(); -} - -/* - * smp_call_function - run a function on all other CPUs. - * @func: The function to run. This must be fast and non-blocking. - * @info: An arbitrary pointer to pass to the function. - * @nonatomic: currently unused. - * @wait: If true, wait (atomically) until function has completed on other - * CPUs. - * - * Returns 0 on success, else a negative status code. Does not return until - * remote CPUs are nearly ready to execute func or are or have executed. - * - * You must not call this function with disabled interrupts or from a - * hardware interrupt handler or from a bottom half handler. - * Actually there are a few legal cases, like panic. - */ -int smp_call_function (void (*func) (void *info), void *info, int nonatomic, - int wait) -{ - spin_lock(&call_lock); - __smp_call_function(func,info,nonatomic,wait); - spin_unlock(&call_lock); - return 0; -} -EXPORT_SYMBOL(smp_call_function); - -static void stop_this_cpu(void *dummy) -{ - local_irq_disable(); - /* - * Remove this CPU: - */ - cpu_clear(smp_processor_id(), cpu_online_map); - disable_local_APIC(); - for (;;) - halt(); -} - -void smp_send_stop(void) -{ - int nolock; - unsigned long flags; - - if (reboot_force) - return; - - /* Don't deadlock on the call lock in panic */ - nolock = !spin_trylock(&call_lock); - local_irq_save(flags); - __smp_call_function(stop_this_cpu, NULL, 0, 0); - if (!nolock) - spin_unlock(&call_lock); - disable_local_APIC(); - local_irq_restore(flags); -} - -/* - * Reschedule call back. Nothing to do, - * all the work is done automatically when - * we return from the interrupt. - */ -asmlinkage void smp_reschedule_interrupt(void) -{ - ack_APIC_irq(); -} - -asmlinkage void smp_call_function_interrupt(void) -{ - void (*func) (void *info) = call_data->func; - void *info = call_data->info; - int wait = call_data->wait; - - ack_APIC_irq(); - /* - * Notify initiating CPU that I've grabbed the data and am - * about to execute the function - */ - mb(); - atomic_inc(&call_data->started); - /* - * At this point the info structure may be out of scope unless wait==1 - */ - exit_idle(); - irq_enter(); - (*func)(info); - irq_exit(); - if (wait) { - mb(); - atomic_inc(&call_data->finished); - } -} - diff --git a/arch/x86_64/kernel/smpboot_64.c b/arch/x86_64/kernel/smpboot_64.c deleted file mode 100644 index 32f50783edc..00000000000 --- a/arch/x86_64/kernel/smpboot_64.c +++ /dev/null @@ -1,1085 +0,0 @@ -/* - * x86 SMP booting functions - * - * (c) 1995 Alan Cox, Building #3 <alan@redhat.com> - * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com> - * Copyright 2001 Andi Kleen, SuSE Labs. - * - * Much of the core SMP work is based on previous work by Thomas Radke, to - * whom a great many thanks are extended. - * - * Thanks to Intel for making available several different Pentium, - * Pentium Pro and Pentium-II/Xeon MP machines. - * Original development of Linux SMP code supported by Caldera. - * - * This code is released under the GNU General Public License version 2 - * - * Fixes - * Felix Koop : NR_CPUS used properly - * Jose Renau : Handle single CPU case. - * Alan Cox : By repeated request 8) - Total BogoMIP report. - * Greg Wright : Fix for kernel stacks panic. - * Erich Boleyn : MP v1.4 and additional changes. - * Matthias Sattler : Changes for 2.1 kernel map. - * Michel Lespinasse : Changes for 2.1 kernel map. - * Michael Chastain : Change trampoline.S to gnu as. - * Alan Cox : Dumb bug: 'B' step PPro's are fine - * Ingo Molnar : Added APIC timers, based on code - * from Jose Renau - * Ingo Molnar : various cleanups and rewrites - * Tigran Aivazian : fixed "0.00 in /proc/uptime on SMP" bug. - * Maciej W. Rozycki : Bits for genuine 82489DX APICs - * Andi Kleen : Changed for SMP boot into long mode. - * Rusty Russell : Hacked into shape for new "hotplug" boot process. - * Andi Kleen : Converted to new state machine. - * Various cleanups. - * Probably mostly hotplug CPU ready now. - * Ashok Raj : CPU hotplug support - */ - - -#include <linux/init.h> - -#include <linux/mm.h> -#include <linux/kernel_stat.h> -#include <linux/bootmem.h> -#include <linux/thread_info.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/mc146818rtc.h> -#include <linux/smp.h> -#include <linux/kdebug.h> - -#include <asm/mtrr.h> -#include <asm/pgalloc.h> -#include <asm/desc.h> -#include <asm/tlbflush.h> -#include <asm/proto.h> -#include <asm/nmi.h> -#include <asm/irq.h> -#include <asm/hw_irq.h> -#include <asm/numa.h> - -/* Number of siblings per CPU package */ -int smp_num_siblings = 1; -EXPORT_SYMBOL(smp_num_siblings); - -/* Last level cache ID of each logical CPU */ -u8 cpu_llc_id[NR_CPUS] __cpuinitdata = {[0 ... NR_CPUS-1] = BAD_APICID}; - -/* Bitmask of currently online CPUs */ -cpumask_t cpu_online_map __read_mostly; - -EXPORT_SYMBOL(cpu_online_map); - -/* - * Private maps to synchronize booting between AP and BP. - * Probably not needed anymore, but it makes for easier debugging. -AK - */ -cpumask_t cpu_callin_map; -cpumask_t cpu_callout_map; -EXPORT_SYMBOL(cpu_callout_map); - -cpumask_t cpu_possible_map; -EXPORT_SYMBOL(cpu_possible_map); - -/* Per CPU bogomips and other parameters */ -struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned; -EXPORT_SYMBOL(cpu_data); - -/* Set when the idlers are all forked */ -int smp_threads_ready; - -/* representing HT siblings of each logical CPU */ -cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; -EXPORT_SYMBOL(cpu_sibling_map); - -/* representing HT and core siblings of each logical CPU */ -cpumask_t cpu_core_map[NR_CPUS] __read_mostly; -EXPORT_SYMBOL(cpu_core_map); - -/* - * Trampoline 80x86 program as an array. - */ - -extern unsigned char trampoline_data[]; -extern unsigned char trampoline_end[]; - -/* State of each CPU */ -DEFINE_PER_CPU(int, cpu_state) = { 0 }; - -/* - * Store all idle threads, this can be reused instead of creating - * a new thread. Also avoids complicated thread destroy functionality - * for idle threads. - */ -struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ; - -#define get_idle_for_cpu(x) (idle_thread_array[(x)]) -#define set_idle_for_cpu(x,p) (idle_thread_array[(x)] = (p)) - -/* - * Currently trivial. Write the real->protected mode - * bootstrap into the page concerned. The caller - * has made sure it's suitably aligned. - */ - -static unsigned long __cpuinit setup_trampoline(void) -{ - void *tramp = __va(SMP_TRAMPOLINE_BASE); - memcpy(tramp, trampoline_data, trampoline_end - trampoline_data); - return virt_to_phys(tramp); -} - -/* - * The bootstrap kernel entry code has set these up. Save them for - * a given CPU - */ - -static void __cpuinit smp_store_cpu_info(int id) -{ - struct cpuinfo_x86 *c = cpu_data + id; - - *c = boot_cpu_data; - identify_cpu(c); - print_cpu_info(c); -} - -static atomic_t init_deasserted __cpuinitdata; - -/* - * Report back to the Boot Processor. - * Running on AP. - */ -void __cpuinit smp_callin(void) -{ - int cpuid, phys_id; - unsigned long timeout; - - /* - * If waken up by an INIT in an 82489DX configuration - * we may get here before an INIT-deassert IPI reaches - * our local APIC. We have to wait for the IPI or we'll - * lock up on an APIC access. - */ - while (!atomic_read(&init_deasserted)) - cpu_relax(); - - /* - * (This works even if the APIC is not enabled.) - */ - phys_id = GET_APIC_ID(apic_read(APIC_ID)); - cpuid = smp_processor_id(); - if (cpu_isset(cpuid, cpu_callin_map)) { - panic("smp_callin: phys CPU#%d, CPU#%d already present??\n", - phys_id, cpuid); - } - Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id); - - /* - * STARTUP IPIs are fragile beasts as they might sometimes - * trigger some glue motherboard logic. Complete APIC bus - * silence for 1 second, this overestimates the time the - * boot CPU is spending to send the up to 2 STARTUP IPIs - * by a factor of two. This should be enough. - */ - - /* - * Waiting 2s total for startup (udelay is not yet working) - */ - timeout = jiffies + 2*HZ; - while (time_before(jiffies, timeout)) { - /* - * Has the boot CPU finished it's STARTUP sequence? - */ - if (cpu_isset(cpuid, cpu_callout_map)) - break; - cpu_relax(); - } - - if (!time_before(jiffies, timeout)) { - panic("smp_callin: CPU%d started up but did not get a callout!\n", - cpuid); - } - - /* - * the boot CPU has finished the init stage and is spinning - * on callin_map until we finish. We are free to set up this - * CPU, first the APIC. (this is probably redundant on most - * boards) - */ - - Dprintk("CALLIN, before setup_local_APIC().\n"); - setup_local_APIC(); - - /* - * Get our bogomips. - * - * Need to enable IRQs because it can take longer and then - * the NMI watchdog might kill us. - */ - local_irq_enable(); - calibrate_delay(); - local_irq_disable(); - Dprintk("Stack at about %p\n",&cpuid); - - disable_APIC_timer(); - - /* - * Save our processor parameters - */ - smp_store_cpu_info(cpuid); - - /* - * Allow the master to continue. - */ - cpu_set(cpuid, cpu_callin_map); -} - -/* maps the cpu to the sched domain representing multi-core */ -cpumask_t cpu_coregroup_map(int cpu) -{ - struct cpuinfo_x86 *c = cpu_data + cpu; - /* - * For perf, we return last level cache shared map. - * And for power savings, we return cpu_core_map - */ - if (sched_mc_power_savings || sched_smt_power_savings) - return cpu_core_map[cpu]; - else - return c->llc_shared_map; -} - -/* representing cpus for which sibling maps can be computed */ -static cpumask_t cpu_sibling_setup_map; - -static inline void set_cpu_sibling_map(int cpu) -{ - int i; - struct cpuinfo_x86 *c = cpu_data; - - cpu_set(cpu, cpu_sibling_setup_map); - - if (smp_num_siblings > 1) { - for_each_cpu_mask(i, cpu_sibling_setup_map) { - if (c[cpu].phys_proc_id == c[i].phys_proc_id && - c[cpu].cpu_core_id == c[i].cpu_core_id) { - cpu_set(i, cpu_sibling_map[cpu]); - cpu_set(cpu, cpu_sibling_map[i]); - cpu_set(i, cpu_core_map[cpu]); - cpu_set(cpu, cpu_core_map[i]); - cpu_set(i, c[cpu].llc_shared_map); - cpu_set(cpu, c[i].llc_shared_map); - } - } - } else { - cpu_set(cpu, cpu_sibling_map[cpu]); - } - - cpu_set(cpu, c[cpu].llc_shared_map); - - if (current_cpu_data.x86_max_cores == 1) { - cpu_core_map[cpu] = cpu_sibling_map[cpu]; - c[cpu].booted_cores = 1; - return; - } - - for_each_cpu_mask(i, cpu_sibling_setup_map) { - if (cpu_llc_id[cpu] != BAD_APICID && - cpu_llc_id[cpu] == cpu_llc_id[i]) { - cpu_set(i, c[cpu].llc_shared_map); - cpu_set(cpu, c[i].llc_shared_map); - } - if (c[cpu].phys_proc_id == c[i].phys_proc_id) { - cpu_set(i, cpu_core_map[cpu]); - cpu_set(cpu, cpu_core_map[i]); - /* - * Does this new cpu bringup a new core? - */ - if (cpus_weight(cpu_sibling_map[cpu]) == 1) { - /* - * for each core in package, increment - * the booted_cores for this new cpu - */ - if (first_cpu(cpu_sibling_map[i]) == i) - c[cpu].booted_cores++; - /* - * increment the core count for all - * the other cpus in this package - */ - if (i != cpu) - c[i].booted_cores++; - } else if (i != cpu && !c[cpu].booted_cores) - c[cpu].booted_cores = c[i].booted_cores; - } - } -} - -/* - * Setup code on secondary processor (after comming out of the trampoline) - */ -void __cpuinit start_secondary(void) -{ - /* - * Dont put anything before smp_callin(), SMP - * booting is too fragile that we want to limit the - * things done here to the most necessary things. - */ - cpu_init(); - preempt_disable(); - smp_callin(); - - /* otherwise gcc will move up the smp_processor_id before the cpu_init */ - barrier(); - - /* - * Check TSC sync first: - */ - check_tsc_sync_target(); - - Dprintk("cpu %d: setting up apic clock\n", smp_processor_id()); - setup_secondary_APIC_clock(); - - Dprintk("cpu %d: enabling apic timer\n", smp_processor_id()); - - if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); - enable_NMI_through_LVT0(NULL); - enable_8259A_irq(0); - } - - enable_APIC_timer(); - - /* - * The sibling maps must be set before turing the online map on for - * this cpu - */ - set_cpu_sibling_map(smp_processor_id()); - - /* - * We need to hold call_lock, so there is no inconsistency - * between the time smp_call_function() determines number of - * IPI receipients, and the time when the determination is made - * for which cpus receive the IPI in genapic_flat.c. Holding this - * lock helps us to not include this cpu in a currently in progress - * smp_call_function(). - */ - lock_ipi_call_lock(); - spin_lock(&vector_lock); - - /* Setup the per cpu irq handling data structures */ - __setup_vector_irq(smp_processor_id()); - /* - * Allow the master to continue. - */ - cpu_set(smp_processor_id(), cpu_online_map); - per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; - spin_unlock(&vector_lock); - - unlock_ipi_call_lock(); - - cpu_idle(); -} - -extern volatile unsigned long init_rsp; -extern void (*initial_code)(void); - -#ifdef APIC_DEBUG -static void inquire_remote_apic(int apicid) -{ - unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 }; - char *names[] = { "ID", "VERSION", "SPIV" }; - int timeout; - unsigned int status; - - printk(KERN_INFO "Inquiring remote APIC #%d...\n", apicid); - - for (i = 0; i < sizeof(regs) / sizeof(*regs); i++) { - printk("... APIC #%d %s: ", apicid, names[i]); - - /* - * Wait for idle. - */ - status = safe_apic_wait_icr_idle(); - if (status) - printk("a previous APIC delivery may have failed\n"); - - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); - apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]); - - timeout = 0; - do { - udelay(100); - status = apic_read(APIC_ICR) & APIC_ICR_RR_MASK; - } while (status == APIC_ICR_RR_INPROG && timeout++ < 1000); - - switch (status) { - case APIC_ICR_RR_VALID: - status = apic_read(APIC_RRR); - printk("%08x\n", status); - break; - default: - printk("failed\n"); - } - } -} -#endif - -/* - * Kick the secondary to wake up. - */ -static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int start_rip) -{ - unsigned long send_status, accept_status = 0; - int maxlvt, num_starts, j; - - Dprintk("Asserting INIT.\n"); - - /* - * Turn INIT on target chip - */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - - /* - * Send IPI - */ - apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT - | APIC_DM_INIT); - - Dprintk("Waiting for send to finish...\n"); - send_status = safe_apic_wait_icr_idle(); - - mdelay(10); - - Dprintk("Deasserting INIT.\n"); - - /* Target chip */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - - /* Send IPI */ - apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); - - Dprintk("Waiting for send to finish...\n"); - send_status = safe_apic_wait_icr_idle(); - - mb(); - atomic_set(&init_deasserted, 1); - - num_starts = 2; - - /* - * Run STARTUP IPI loop. - */ - Dprintk("#startup loops: %d.\n", num_starts); - - maxlvt = get_maxlvt(); - - for (j = 1; j <= num_starts; j++) { - Dprintk("Sending STARTUP #%d.\n",j); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - Dprintk("After apic_write.\n"); - - /* - * STARTUP IPI - */ - - /* Target chip */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - - /* Boot on the stack */ - /* Kick the second */ - apic_write(APIC_ICR, APIC_DM_STARTUP | (start_rip >> 12)); - - /* - * Give the other CPU some time to accept the IPI. - */ - udelay(300); - - Dprintk("Startup point 1.\n"); - - Dprintk("Waiting for send to finish...\n"); - send_status = safe_apic_wait_icr_idle(); - - /* - * Give the other CPU some time to accept the IPI. - */ - udelay(200); - /* - * Due to the Pentium erratum 3AP. - */ - if (maxlvt > 3) { - apic_write(APIC_ESR, 0); - } - accept_status = (apic_read(APIC_ESR) & 0xEF); - if (send_status || accept_status) - break; - } - Dprintk("After Startup.\n"); - - if (send_status) - printk(KERN_ERR "APIC never delivered???\n"); - if (accept_status) - printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status); - - return (send_status | accept_status); -} - -struct create_idle { - struct work_struct work; - struct task_struct *idle; - struct completion done; - int cpu; -}; - -void do_fork_idle(struct work_struct *work) -{ - struct create_idle *c_idle = - container_of(work, struct create_idle, work); - - c_idle->idle = fork_idle(c_idle->cpu); - complete(&c_idle->done); -} - -/* - * Boot one CPU. - */ -static int __cpuinit do_boot_cpu(int cpu, int apicid) -{ - unsigned long boot_error; - int timeout; - unsigned long start_rip; - struct create_idle c_idle = { - .work = __WORK_INITIALIZER(c_idle.work, do_fork_idle), - .cpu = cpu, - .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done), - }; - - /* allocate memory for gdts of secondary cpus. Hotplug is considered */ - if (!cpu_gdt_descr[cpu].address && - !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) { - printk(KERN_ERR "Failed to allocate GDT for CPU %d\n", cpu); - return -1; - } - - /* Allocate node local memory for AP pdas */ - if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) { - struct x8664_pda *newpda, *pda; - int node = cpu_to_node(cpu); - pda = cpu_pda(cpu); - newpda = kmalloc_node(sizeof (struct x8664_pda), GFP_ATOMIC, - node); - if (newpda) { - memcpy(newpda, pda, sizeof (struct x8664_pda)); - cpu_pda(cpu) = newpda; - } else - printk(KERN_ERR - "Could not allocate node local PDA for CPU %d on node %d\n", - cpu, node); - } - - alternatives_smp_switch(1); - - c_idle.idle = get_idle_for_cpu(cpu); - - if (c_idle.idle) { - c_idle.idle->thread.rsp = (unsigned long) (((struct pt_regs *) - (THREAD_SIZE + task_stack_page(c_idle.idle))) - 1); - init_idle(c_idle.idle, cpu); - goto do_rest; - } - - /* - * During cold boot process, keventd thread is not spun up yet. - * When we do cpu hot-add, we create idle threads on the fly, we should - * not acquire any attributes from the calling context. Hence the clean - * way to create kernel_threads() is to do that from keventd(). - * We do the current_is_keventd() due to the fact that ACPI notifier - * was also queuing to keventd() and when the caller is already running - * in context of keventd(), we would end up with locking up the keventd - * thread. - */ - if (!keventd_up() || current_is_keventd()) - c_idle.work.func(&c_idle.work); - else { - schedule_work(&c_idle.work); - wait_for_completion(&c_idle.done); - } - - if (IS_ERR(c_idle.idle)) { - printk("failed fork for CPU %d\n", cpu); - return PTR_ERR(c_idle.idle); - } - - set_idle_for_cpu(cpu, c_idle.idle); - -do_rest: - - cpu_pda(cpu)->pcurrent = c_idle.idle; - - start_rip = setup_trampoline(); - - init_rsp = c_idle.idle->thread.rsp; - per_cpu(init_tss,cpu).rsp0 = init_rsp; - initial_code = start_secondary; - clear_tsk_thread_flag(c_idle.idle, TIF_FORK); - - printk(KERN_INFO "Booting processor %d/%d APIC 0x%x\n", cpu, - cpus_weight(cpu_present_map), - apicid); - - /* - * This grunge runs the startup process for - * the targeted processor. - */ - - atomic_set(&init_deasserted, 0); - - Dprintk("Setting warm reset code and vector.\n"); - - CMOS_WRITE(0xa, 0xf); - local_flush_tlb(); - Dprintk("1.\n"); - *((volatile unsigned short *) phys_to_virt(0x469)) = start_rip >> 4; - Dprintk("2.\n"); - *((volatile unsigned short *) phys_to_virt(0x467)) = start_rip & 0xf; - Dprintk("3.\n"); - - /* - * Be paranoid about clearing APIC errors. - */ - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - - /* - * Status is now clean - */ - boot_error = 0; - - /* - * Starting actual IPI sequence... - */ - boot_error = wakeup_secondary_via_INIT(apicid, start_rip); - - if (!boot_error) { - /* - * allow APs to start initializing. - */ - Dprintk("Before Callout %d.\n", cpu); - cpu_set(cpu, cpu_callout_map); - Dprintk("After Callout %d.\n", cpu); - - /* - * Wait 5s total for a response - */ - for (timeout = 0; timeout < 50000; timeout++) { - if (cpu_isset(cpu, cpu_callin_map)) - break; /* It has booted */ - udelay(100); - } - - if (cpu_isset(cpu, cpu_callin_map)) { - /* number CPUs logically, starting from 1 (BSP is 0) */ - Dprintk("CPU has booted.\n"); - } else { - boot_error = 1; - if (*((volatile unsigned char *)phys_to_virt(SMP_TRAMPOLINE_BASE)) - == 0xA5) - /* trampoline started but...? */ - printk("Stuck ??\n"); - else - /* trampoline code not run */ - printk("Not responding.\n"); -#ifdef APIC_DEBUG - inquire_remote_apic(apicid); -#endif - } - } - if (boot_error) { - cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */ - clear_bit(cpu, &cpu_initialized); /* was set by cpu_init() */ - clear_node_cpumask(cpu); /* was set by numa_add_cpu */ - cpu_clear(cpu, cpu_present_map); - cpu_clear(cpu, cpu_possible_map); - x86_cpu_to_apicid[cpu] = BAD_APICID; - x86_cpu_to_log_apicid[cpu] = BAD_APICID; - return -EIO; - } - - return 0; -} - -cycles_t cacheflush_time; -unsigned long cache_decay_ticks; - -/* - * Cleanup possible dangling ends... - */ -static __cpuinit void smp_cleanup_boot(void) -{ - /* - * Paranoid: Set warm reset code and vector here back - * to default values. - */ - CMOS_WRITE(0, 0xf); - - /* - * Reset trampoline flag - */ - *((volatile int *) phys_to_virt(0x467)) = 0; -} - -/* - * Fall back to non SMP mode after errors. - * - * RED-PEN audit/test this more. I bet there is more state messed up here. - */ -static __init void disable_smp(void) -{ - cpu_present_map = cpumask_of_cpu(0); - cpu_possible_map = cpumask_of_cpu(0); - if (smp_found_config) - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id); - else - phys_cpu_present_map = physid_mask_of_physid(0); - cpu_set(0, cpu_sibling_map[0]); - cpu_set(0, cpu_core_map[0]); -} - -#ifdef CONFIG_HOTPLUG_CPU - -int additional_cpus __initdata = -1; - -/* - * cpu_possible_map should be static, it cannot change as cpu's - * are onlined, or offlined. The reason is per-cpu data-structures - * are allocated by some modules at init time, and dont expect to - * do this dynamically on cpu arrival/departure. - * cpu_present_map on the other hand can change dynamically. - * In case when cpu_hotplug is not compiled, then we resort to current - * behaviour, which is cpu_possible == cpu_present. - * - Ashok Raj - * - * Three ways to find out the number of additional hotplug CPUs: - * - If the BIOS specified disabled CPUs in ACPI/mptables use that. - * - The user can overwrite it with additional_cpus=NUM - * - Otherwise don't reserve additional CPUs. - * We do this because additional CPUs waste a lot of memory. - * -AK - */ -__init void prefill_possible_map(void) -{ - int i; - int possible; - - if (additional_cpus == -1) { - if (disabled_cpus > 0) - additional_cpus = disabled_cpus; - else - additional_cpus = 0; - } - possible = num_processors + additional_cpus; - if (possible > NR_CPUS) - possible = NR_CPUS; - - printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n", - possible, - max_t(int, possible - num_processors, 0)); - - for (i = 0; i < possible; i++) - cpu_set(i, cpu_possible_map); -} -#endif - -/* - * Various sanity checks. - */ -static int __init smp_sanity_check(unsigned max_cpus) -{ - if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) { - printk("weird, boot CPU (#%d) not listed by the BIOS.\n", - hard_smp_processor_id()); - physid_set(hard_smp_processor_id(), phys_cpu_present_map); - } - - /* - * If we couldn't find an SMP configuration at boot time, - * get out of here now! - */ - if (!smp_found_config) { - printk(KERN_NOTICE "SMP motherboard not detected.\n"); - disable_smp(); - if (APIC_init_uniprocessor()) - printk(KERN_NOTICE "Local APIC not detected." - " Using dummy APIC emulation.\n"); - return -1; - } - - /* - * Should not be necessary because the MP table should list the boot - * CPU too, but we do it for the sake of robustness anyway. - */ - if (!physid_isset(boot_cpu_id, phys_cpu_present_map)) { - printk(KERN_NOTICE "weird, boot CPU (#%d) not listed by the BIOS.\n", - boot_cpu_id); - physid_set(hard_smp_processor_id(), phys_cpu_present_map); - } - - /* - * If we couldn't find a local APIC, then get out of here now! - */ - if (!cpu_has_apic) { - printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", - boot_cpu_id); - printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n"); - nr_ioapics = 0; - return -1; - } - - /* - * If SMP should be disabled, then really disable it! - */ - if (!max_cpus) { - printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n"); - nr_ioapics = 0; - return -1; - } - - return 0; -} - -/* - * Prepare for SMP bootup. The MP table or ACPI has been read - * earlier. Just do some sanity checking here and enable APIC mode. - */ -void __init smp_prepare_cpus(unsigned int max_cpus) -{ - nmi_watchdog_default(); - current_cpu_data = boot_cpu_data; - current_thread_info()->cpu = 0; /* needed? */ - set_cpu_sibling_map(0); - - if (smp_sanity_check(max_cpus) < 0) { - printk(KERN_INFO "SMP disabled\n"); - disable_smp(); - return; - } - - - /* - * Switch from PIC to APIC mode. - */ - setup_local_APIC(); - - if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_id) { - panic("Boot APIC ID in local APIC unexpected (%d vs %d)", - GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_id); - /* Or can we switch back to PIC here? */ - } - - /* - * Now start the IO-APICs - */ - if (!skip_ioapic_setup && nr_ioapics) - setup_IO_APIC(); - else - nr_ioapics = 0; - - /* - * Set up local APIC timer on boot CPU. - */ - - setup_boot_APIC_clock(); -} - -/* - * Early setup to make printk work. - */ -void __init smp_prepare_boot_cpu(void) -{ - int me = smp_processor_id(); - cpu_set(me, cpu_online_map); - cpu_set(me, cpu_callout_map); - per_cpu(cpu_state, me) = CPU_ONLINE; -} - -/* - * Entry point to boot a CPU. - */ -int __cpuinit __cpu_up(unsigned int cpu) -{ - int apicid = cpu_present_to_apicid(cpu); - unsigned long flags; - int err; - - WARN_ON(irqs_disabled()); - - Dprintk("++++++++++++++++++++=_---CPU UP %u\n", cpu); - - if (apicid == BAD_APICID || apicid == boot_cpu_id || - !physid_isset(apicid, phys_cpu_present_map)) { - printk("__cpu_up: bad cpu %d\n", cpu); - return -EINVAL; - } - - /* - * Already booted CPU? - */ - if (cpu_isset(cpu, cpu_callin_map)) { - Dprintk("do_boot_cpu %d Already started\n", cpu); - return -ENOSYS; - } - - /* - * Save current MTRR state in case it was changed since early boot - * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync: - */ - mtrr_save_state(); - - per_cpu(cpu_state, cpu) = CPU_UP_PREPARE; - /* Boot it! */ - err = do_boot_cpu(cpu, apicid); - if (err < 0) { - Dprintk("do_boot_cpu failed %d\n", err); - return err; - } - - /* Unleash the CPU! */ - Dprintk("waiting for cpu %d\n", cpu); - - /* - * Make sure and check TSC sync: - */ - local_irq_save(flags); - check_tsc_sync_source(cpu); - local_irq_restore(flags); - - while (!cpu_isset(cpu, cpu_online_map)) - cpu_relax(); - err = 0; - - return err; -} - -/* - * Finish the SMP boot. - */ -void __init smp_cpus_done(unsigned int max_cpus) -{ - smp_cleanup_boot(); - setup_ioapic_dest(); - check_nmi_watchdog(); -} - -#ifdef CONFIG_HOTPLUG_CPU - -static void remove_siblinginfo(int cpu) -{ - int sibling; - struct cpuinfo_x86 *c = cpu_data; - - for_each_cpu_mask(sibling, cpu_core_map[cpu]) { - cpu_clear(cpu, cpu_core_map[sibling]); - /* - * last thread sibling in this cpu core going down - */ - if (cpus_weight(cpu_sibling_map[cpu]) == 1) - c[sibling].booted_cores--; - } - - for_each_cpu_mask(sibling, cpu_sibling_map[cpu]) - cpu_clear(cpu, cpu_sibling_map[sibling]); - cpus_clear(cpu_sibling_map[cpu]); - cpus_clear(cpu_core_map[cpu]); - c[cpu].phys_proc_id = 0; - c[cpu].cpu_core_id = 0; - cpu_clear(cpu, cpu_sibling_setup_map); -} - -void remove_cpu_from_maps(void) -{ - int cpu = smp_processor_id(); - - cpu_clear(cpu, cpu_callout_map); - cpu_clear(cpu, cpu_callin_map); - clear_bit(cpu, &cpu_initialized); /* was set by cpu_init() */ - clear_node_cpumask(cpu); -} - -int __cpu_disable(void) -{ - int cpu = smp_processor_id(); - - /* - * Perhaps use cpufreq to drop frequency, but that could go - * into generic code. - * - * We won't take down the boot processor on i386 due to some - * interrupts only being able to be serviced by the BSP. - * Especially so if we're not using an IOAPIC -zwane - */ - if (cpu == 0) - return -EBUSY; - - if (nmi_watchdog == NMI_LOCAL_APIC) - stop_apic_nmi_watchdog(NULL); - clear_local_APIC(); - - /* - * HACK: - * Allow any queued timer interrupts to get serviced - * This is only a temporary solution until we cleanup - * fixup_irqs as we do for IA64. - */ - local_irq_enable(); - mdelay(1); - - local_irq_disable(); - remove_siblinginfo(cpu); - - spin_lock(&vector_lock); - /* It's now safe to remove this processor from the online map */ - cpu_clear(cpu, cpu_online_map); - spin_unlock(&vector_lock); - remove_cpu_from_maps(); - fixup_irqs(cpu_online_map); - return 0; -} - -void __cpu_die(unsigned int cpu) -{ - /* We don't do anything here: idle task is faking death itself. */ - unsigned int i; - - for (i = 0; i < 10; i++) { - /* They ack this in play_dead by setting CPU_DEAD */ - if (per_cpu(cpu_state, cpu) == CPU_DEAD) { - printk ("CPU %d is now offline\n", cpu); - if (1 == num_online_cpus()) - alternatives_smp_switch(0); - return; - } - msleep(100); - } - printk(KERN_ERR "CPU %u didn't die...\n", cpu); -} - -static __init int setup_additional_cpus(char *s) -{ - return s && get_option(&s, &additional_cpus) ? 0 : -EINVAL; -} -early_param("additional_cpus", setup_additional_cpus); - -#else /* ... !CONFIG_HOTPLUG_CPU */ - -int __cpu_disable(void) -{ - return -ENOSYS; -} - -void __cpu_die(unsigned int cpu) -{ - /* We said "no" in __cpu_disable */ - BUG(); -} -#endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/x86_64/kernel/stacktrace.c b/arch/x86_64/kernel/stacktrace.c deleted file mode 100644 index cb910911358..00000000000 --- a/arch/x86_64/kernel/stacktrace.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * arch/x86_64/kernel/stacktrace.c - * - * Stack trace management functions - * - * Copyright (C) 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> - */ -#include <linux/sched.h> -#include <linux/stacktrace.h> -#include <linux/module.h> -#include <asm/stacktrace.h> - -static void save_stack_warning(void *data, char *msg) -{ -} - -static void -save_stack_warning_symbol(void *data, char *msg, unsigned long symbol) -{ -} - -static int save_stack_stack(void *data, char *name) -{ - return -1; -} - -static void save_stack_address(void *data, unsigned long addr) -{ - struct stack_trace *trace = (struct stack_trace *)data; - if (trace->skip > 0) { - trace->skip--; - return; - } - if (trace->nr_entries < trace->max_entries) - trace->entries[trace->nr_entries++] = addr; -} - -static struct stacktrace_ops save_stack_ops = { - .warning = save_stack_warning, - .warning_symbol = save_stack_warning_symbol, - .stack = save_stack_stack, - .address = save_stack_address, -}; - -/* - * Save stack-backtrace addresses into a stack_trace buffer. - */ -void save_stack_trace(struct stack_trace *trace) -{ - dump_trace(current, NULL, NULL, &save_stack_ops, trace); - if (trace->nr_entries < trace->max_entries) - trace->entries[trace->nr_entries++] = ULONG_MAX; -} -EXPORT_SYMBOL(save_stack_trace); diff --git a/arch/x86_64/kernel/suspend_64.c b/arch/x86_64/kernel/suspend_64.c deleted file mode 100644 index 573c0a6e0ac..00000000000 --- a/arch/x86_64/kernel/suspend_64.c +++ /dev/null @@ -1,239 +0,0 @@ -/* - * Suspend support specific for i386. - * - * Distribute under GPLv2 - * - * Copyright (c) 2002 Pavel Machek <pavel@suse.cz> - * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org> - */ - -#include <linux/smp.h> -#include <linux/suspend.h> -#include <asm/proto.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/mtrr.h> - -/* References to section boundaries */ -extern const void __nosave_begin, __nosave_end; - -struct saved_context saved_context; - -unsigned long saved_context_eax, saved_context_ebx, saved_context_ecx, saved_context_edx; -unsigned long saved_context_esp, saved_context_ebp, saved_context_esi, saved_context_edi; -unsigned long saved_context_r08, saved_context_r09, saved_context_r10, saved_context_r11; -unsigned long saved_context_r12, saved_context_r13, saved_context_r14, saved_context_r15; -unsigned long saved_context_eflags; - -void __save_processor_state(struct saved_context *ctxt) -{ - kernel_fpu_begin(); - - /* - * descriptor tables - */ - asm volatile ("sgdt %0" : "=m" (ctxt->gdt_limit)); - asm volatile ("sidt %0" : "=m" (ctxt->idt_limit)); - asm volatile ("str %0" : "=m" (ctxt->tr)); - - /* XMM0..XMM15 should be handled by kernel_fpu_begin(). */ - /* - * segment registers - */ - asm volatile ("movw %%ds, %0" : "=m" (ctxt->ds)); - asm volatile ("movw %%es, %0" : "=m" (ctxt->es)); - asm volatile ("movw %%fs, %0" : "=m" (ctxt->fs)); - asm volatile ("movw %%gs, %0" : "=m" (ctxt->gs)); - asm volatile ("movw %%ss, %0" : "=m" (ctxt->ss)); - - rdmsrl(MSR_FS_BASE, ctxt->fs_base); - rdmsrl(MSR_GS_BASE, ctxt->gs_base); - rdmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base); - mtrr_save_fixed_ranges(NULL); - - /* - * control registers - */ - rdmsrl(MSR_EFER, ctxt->efer); - ctxt->cr0 = read_cr0(); - ctxt->cr2 = read_cr2(); - ctxt->cr3 = read_cr3(); - ctxt->cr4 = read_cr4(); - ctxt->cr8 = read_cr8(); -} - -void save_processor_state(void) -{ - __save_processor_state(&saved_context); -} - -static void do_fpu_end(void) -{ - /* - * Restore FPU regs if necessary - */ - kernel_fpu_end(); -} - -void __restore_processor_state(struct saved_context *ctxt) -{ - /* - * control registers - */ - wrmsrl(MSR_EFER, ctxt->efer); - write_cr8(ctxt->cr8); - write_cr4(ctxt->cr4); - write_cr3(ctxt->cr3); - write_cr2(ctxt->cr2); - write_cr0(ctxt->cr0); - - /* - * now restore the descriptor tables to their proper values - * ltr is done i fix_processor_context(). - */ - asm volatile ("lgdt %0" :: "m" (ctxt->gdt_limit)); - asm volatile ("lidt %0" :: "m" (ctxt->idt_limit)); - - /* - * segment registers - */ - asm volatile ("movw %0, %%ds" :: "r" (ctxt->ds)); - asm volatile ("movw %0, %%es" :: "r" (ctxt->es)); - asm volatile ("movw %0, %%fs" :: "r" (ctxt->fs)); - load_gs_index(ctxt->gs); - asm volatile ("movw %0, %%ss" :: "r" (ctxt->ss)); - - wrmsrl(MSR_FS_BASE, ctxt->fs_base); - wrmsrl(MSR_GS_BASE, ctxt->gs_base); - wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base); - - fix_processor_context(); - - do_fpu_end(); - mtrr_ap_init(); -} - -void restore_processor_state(void) -{ - __restore_processor_state(&saved_context); -} - -void fix_processor_context(void) -{ - int cpu = smp_processor_id(); - struct tss_struct *t = &per_cpu(init_tss, cpu); - - set_tss_desc(cpu,t); /* This just modifies memory; should not be neccessary. But... This is neccessary, because 386 hardware has concept of busy TSS or some similar stupidity. */ - - cpu_gdt(cpu)[GDT_ENTRY_TSS].type = 9; - - syscall_init(); /* This sets MSR_*STAR and related */ - load_TR_desc(); /* This does ltr */ - load_LDT(¤t->active_mm->context); /* This does lldt */ - - /* - * Now maybe reload the debug registers - */ - if (current->thread.debugreg7){ - loaddebug(¤t->thread, 0); - loaddebug(¤t->thread, 1); - loaddebug(¤t->thread, 2); - loaddebug(¤t->thread, 3); - /* no 4 and 5 */ - loaddebug(¤t->thread, 6); - loaddebug(¤t->thread, 7); - } - -} - -#ifdef CONFIG_HIBERNATION -/* Defined in arch/x86_64/kernel/suspend_asm.S */ -extern int restore_image(void); - -pgd_t *temp_level4_pgt; - -static int res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long end) -{ - long i, j; - - i = pud_index(address); - pud = pud + i; - for (; i < PTRS_PER_PUD; pud++, i++) { - unsigned long paddr; - pmd_t *pmd; - - paddr = address + i*PUD_SIZE; - if (paddr >= end) - break; - - pmd = (pmd_t *)get_safe_page(GFP_ATOMIC); - if (!pmd) - return -ENOMEM; - set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE)); - for (j = 0; j < PTRS_PER_PMD; pmd++, j++, paddr += PMD_SIZE) { - unsigned long pe; - - if (paddr >= end) - break; - pe = _PAGE_NX | _PAGE_PSE | _KERNPG_TABLE | paddr; - pe &= __supported_pte_mask; - set_pmd(pmd, __pmd(pe)); - } - } - return 0; -} - -static int set_up_temporary_mappings(void) -{ - unsigned long start, end, next; - int error; - - temp_level4_pgt = (pgd_t *)get_safe_page(GFP_ATOMIC); - if (!temp_level4_pgt) - return -ENOMEM; - - /* It is safe to reuse the original kernel mapping */ - set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map), - init_level4_pgt[pgd_index(__START_KERNEL_map)]); - - /* Set up the direct mapping from scratch */ - start = (unsigned long)pfn_to_kaddr(0); - end = (unsigned long)pfn_to_kaddr(end_pfn); - - for (; start < end; start = next) { - pud_t *pud = (pud_t *)get_safe_page(GFP_ATOMIC); - if (!pud) - return -ENOMEM; - next = start + PGDIR_SIZE; - if (next > end) - next = end; - if ((error = res_phys_pud_init(pud, __pa(start), __pa(next)))) - return error; - set_pgd(temp_level4_pgt + pgd_index(start), - mk_kernel_pgd(__pa(pud))); - } - return 0; -} - -int swsusp_arch_resume(void) -{ - int error; - - /* We have got enough memory and from now on we cannot recover */ - if ((error = set_up_temporary_mappings())) - return error; - restore_image(); - return 0; -} - -/* - * pfn_is_nosave - check if given pfn is in the 'nosave' section - */ - -int pfn_is_nosave(unsigned long pfn) -{ - unsigned long nosave_begin_pfn = __pa_symbol(&__nosave_begin) >> PAGE_SHIFT; - unsigned long nosave_end_pfn = PAGE_ALIGN(__pa_symbol(&__nosave_end)) >> PAGE_SHIFT; - return (pfn >= nosave_begin_pfn) && (pfn < nosave_end_pfn); -} -#endif /* CONFIG_HIBERNATION */ diff --git a/arch/x86_64/kernel/suspend_asm_64.S b/arch/x86_64/kernel/suspend_asm_64.S deleted file mode 100644 index 16d183f67bc..00000000000 --- a/arch/x86_64/kernel/suspend_asm_64.S +++ /dev/null @@ -1,110 +0,0 @@ -/* Copyright 2004,2005 Pavel Machek <pavel@suse.cz>, Andi Kleen <ak@suse.de>, Rafael J. Wysocki <rjw@sisk.pl> - * - * Distribute under GPLv2. - * - * swsusp_arch_resume may not use any stack, nor any variable that is - * not "NoSave" during copying pages: - * - * Its rewriting one kernel image with another. What is stack in "old" - * image could very well be data page in "new" image, and overwriting - * your own stack under you is bad idea. - */ - - .text -#include <linux/linkage.h> -#include <asm/segment.h> -#include <asm/page.h> -#include <asm/asm-offsets.h> - -ENTRY(swsusp_arch_suspend) - - movq %rsp, saved_context_esp(%rip) - movq %rax, saved_context_eax(%rip) - movq %rbx, saved_context_ebx(%rip) - movq %rcx, saved_context_ecx(%rip) - movq %rdx, saved_context_edx(%rip) - movq %rbp, saved_context_ebp(%rip) - movq %rsi, saved_context_esi(%rip) - movq %rdi, saved_context_edi(%rip) - movq %r8, saved_context_r08(%rip) - movq %r9, saved_context_r09(%rip) - movq %r10, saved_context_r10(%rip) - movq %r11, saved_context_r11(%rip) - movq %r12, saved_context_r12(%rip) - movq %r13, saved_context_r13(%rip) - movq %r14, saved_context_r14(%rip) - movq %r15, saved_context_r15(%rip) - pushfq ; popq saved_context_eflags(%rip) - - call swsusp_save - ret - -ENTRY(restore_image) - /* switch to temporary page tables */ - movq $__PAGE_OFFSET, %rdx - movq temp_level4_pgt(%rip), %rax - subq %rdx, %rax - movq %rax, %cr3 - /* Flush TLB */ - movq mmu_cr4_features(%rip), %rax - movq %rax, %rdx - andq $~(1<<7), %rdx # PGE - movq %rdx, %cr4; # turn off PGE - movq %cr3, %rcx; # flush TLB - movq %rcx, %cr3; - movq %rax, %cr4; # turn PGE back on - - movq restore_pblist(%rip), %rdx -loop: - testq %rdx, %rdx - jz done - - /* get addresses from the pbe and copy the page */ - movq pbe_address(%rdx), %rsi - movq pbe_orig_address(%rdx), %rdi - movq $512, %rcx - rep - movsq - - /* progress to the next pbe */ - movq pbe_next(%rdx), %rdx - jmp loop -done: - /* go back to the original page tables */ - movq $(init_level4_pgt - __START_KERNEL_map), %rax - addq phys_base(%rip), %rax - movq %rax, %cr3 - - /* Flush TLB, including "global" things (vmalloc) */ - movq mmu_cr4_features(%rip), %rax - movq %rax, %rdx - andq $~(1<<7), %rdx; # PGE - movq %rdx, %cr4; # turn off PGE - movq %cr3, %rcx; # flush TLB - movq %rcx, %cr3 - movq %rax, %cr4; # turn PGE back on - - movl $24, %eax - movl %eax, %ds - - movq saved_context_esp(%rip), %rsp - movq saved_context_ebp(%rip), %rbp - /* Don't restore %rax, it must be 0 anyway */ - movq saved_context_ebx(%rip), %rbx - movq saved_context_ecx(%rip), %rcx - movq saved_context_edx(%rip), %rdx - movq saved_context_esi(%rip), %rsi - movq saved_context_edi(%rip), %rdi - movq saved_context_r08(%rip), %r8 - movq saved_context_r09(%rip), %r9 - movq saved_context_r10(%rip), %r10 - movq saved_context_r11(%rip), %r11 - movq saved_context_r12(%rip), %r12 - movq saved_context_r13(%rip), %r13 - movq saved_context_r14(%rip), %r14 - movq saved_context_r15(%rip), %r15 - pushq saved_context_eflags(%rip) ; popfq - - xorq %rax, %rax - - ret diff --git a/arch/x86_64/kernel/sys_x86_64.c b/arch/x86_64/kernel/sys_x86_64.c deleted file mode 100644 index 4770b7a2052..00000000000 --- a/arch/x86_64/kernel/sys_x86_64.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * linux/arch/x86_64/kernel/sys_x86_64.c - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/syscalls.h> -#include <linux/mm.h> -#include <linux/fs.h> -#include <linux/smp.h> -#include <linux/sem.h> -#include <linux/msg.h> -#include <linux/shm.h> -#include <linux/stat.h> -#include <linux/mman.h> -#include <linux/file.h> -#include <linux/utsname.h> -#include <linux/personality.h> - -#include <asm/uaccess.h> -#include <asm/ia32.h> - -/* - * sys_pipe() is the normal C calling standard for creating - * a pipe. It's not the way Unix traditionally does this, though. - */ -asmlinkage long sys_pipe(int __user *fildes) -{ - int fd[2]; - int error; - - error = do_pipe(fd); - if (!error) { - if (copy_to_user(fildes, fd, 2*sizeof(int))) - error = -EFAULT; - } - return error; -} - -asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long off) -{ - long error; - struct file * file; - - error = -EINVAL; - if (off & ~PAGE_MASK) - goto out; - - error = -EBADF; - file = NULL; - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, off >> PAGE_SHIFT); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - -static void find_start_end(unsigned long flags, unsigned long *begin, - unsigned long *end) -{ - if (!test_thread_flag(TIF_IA32) && (flags & MAP_32BIT)) { - /* This is usually used needed to map code in small - model, so it needs to be in the first 31bit. Limit - it to that. This means we need to move the - unmapped base down for this case. This can give - conflicts with the heap, but we assume that glibc - malloc knows how to fall back to mmap. Give it 1GB - of playground for now. -AK */ - *begin = 0x40000000; - *end = 0x80000000; - } else { - *begin = TASK_UNMAPPED_BASE; - *end = TASK_SIZE; - } -} - -unsigned long -arch_get_unmapped_area(struct file *filp, unsigned long addr, - unsigned long len, unsigned long pgoff, unsigned long flags) -{ - struct mm_struct *mm = current->mm; - struct vm_area_struct *vma; - unsigned long start_addr; - unsigned long begin, end; - - if (flags & MAP_FIXED) - return addr; - - find_start_end(flags, &begin, &end); - - if (len > end) - return -ENOMEM; - - if (addr) { - addr = PAGE_ALIGN(addr); - vma = find_vma(mm, addr); - if (end - len >= addr && - (!vma || addr + len <= vma->vm_start)) - return addr; - } - if (((flags & MAP_32BIT) || test_thread_flag(TIF_IA32)) - && len <= mm->cached_hole_size) { - mm->cached_hole_size = 0; - mm->free_area_cache = begin; - } - addr = mm->free_area_cache; - if (addr < begin) - addr = begin; - start_addr = addr; - -full_search: - for (vma = find_vma(mm, addr); ; vma = vma->vm_next) { - /* At this point: (!vma || addr < vma->vm_end). */ - if (end - len < addr) { - /* - * Start a new search - just in case we missed - * some holes. - */ - if (start_addr != begin) { - start_addr = addr = begin; - mm->cached_hole_size = 0; - goto full_search; - } - return -ENOMEM; - } - if (!vma || addr + len <= vma->vm_start) { - /* - * Remember the place where we stopped the search: - */ - mm->free_area_cache = addr + len; - return addr; - } - if (addr + mm->cached_hole_size < vma->vm_start) - mm->cached_hole_size = vma->vm_start - addr; - - addr = vma->vm_end; - } -} - -asmlinkage long sys_uname(struct new_utsname __user * name) -{ - int err; - down_read(&uts_sem); - err = copy_to_user(name, utsname(), sizeof (*name)); - up_read(&uts_sem); - if (personality(current->personality) == PER_LINUX32) - err |= copy_to_user(&name->machine, "i686", 5); - return err ? -EFAULT : 0; -} diff --git a/arch/x86_64/kernel/syscall_64.c b/arch/x86_64/kernel/syscall_64.c deleted file mode 100644 index 63d592c276c..00000000000 --- a/arch/x86_64/kernel/syscall_64.c +++ /dev/null @@ -1,26 +0,0 @@ -/* System call table for x86-64. */ - -#include <linux/linkage.h> -#include <linux/sys.h> -#include <linux/cache.h> -#include <asm/asm-offsets.h> - -#define __NO_STUBS - -#define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ; -#undef _ASM_X86_64_UNISTD_H_ -#include <asm-x86_64/unistd.h> - -#undef __SYSCALL -#define __SYSCALL(nr, sym) [ nr ] = sym, -#undef _ASM_X86_64_UNISTD_H_ - -typedef void (*sys_call_ptr_t)(void); - -extern void sys_ni_syscall(void); - -const sys_call_ptr_t sys_call_table[__NR_syscall_max+1] = { - /* Smells like a like a compiler bug -- it doesn't work when the & below is removed. */ - [0 ... __NR_syscall_max] = &sys_ni_syscall, -#include <asm-x86_64/unistd.h> -}; diff --git a/arch/x86_64/kernel/tce_64.c b/arch/x86_64/kernel/tce_64.c deleted file mode 100644 index e3f2569b2c4..00000000000 --- a/arch/x86_64/kernel/tce_64.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * This file manages the translation entries for the IBM Calgary IOMMU. - * - * Derived from arch/powerpc/platforms/pseries/iommu.c - * - * Copyright (C) IBM Corporation, 2006 - * - * Author: Jon Mason <jdmason@us.ibm.com> - * Author: Muli Ben-Yehuda <muli@il.ibm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/spinlock.h> -#include <linux/string.h> -#include <linux/pci.h> -#include <linux/dma-mapping.h> -#include <linux/bootmem.h> -#include <asm/tce.h> -#include <asm/calgary.h> -#include <asm/proto.h> - -/* flush a tce at 'tceaddr' to main memory */ -static inline void flush_tce(void* tceaddr) -{ - /* a single tce can't cross a cache line */ - if (cpu_has_clflush) - asm volatile("clflush (%0)" :: "r" (tceaddr)); - else - asm volatile("wbinvd":::"memory"); -} - -void tce_build(struct iommu_table *tbl, unsigned long index, - unsigned int npages, unsigned long uaddr, int direction) -{ - u64* tp; - u64 t; - u64 rpn; - - t = (1 << TCE_READ_SHIFT); - if (direction != DMA_TO_DEVICE) - t |= (1 << TCE_WRITE_SHIFT); - - tp = ((u64*)tbl->it_base) + index; - - while (npages--) { - rpn = (virt_to_bus((void*)uaddr)) >> PAGE_SHIFT; - t &= ~TCE_RPN_MASK; - t |= (rpn << TCE_RPN_SHIFT); - - *tp = cpu_to_be64(t); - flush_tce(tp); - - uaddr += PAGE_SIZE; - tp++; - } -} - -void tce_free(struct iommu_table *tbl, long index, unsigned int npages) -{ - u64* tp; - - tp = ((u64*)tbl->it_base) + index; - - while (npages--) { - *tp = cpu_to_be64(0); - flush_tce(tp); - tp++; - } -} - -static inline unsigned int table_size_to_number_of_entries(unsigned char size) -{ - /* - * size is the order of the table, 0-7 - * smallest table is 8K entries, so shift result by 13 to - * multiply by 8K - */ - return (1 << size) << 13; -} - -static int tce_table_setparms(struct pci_dev *dev, struct iommu_table *tbl) -{ - unsigned int bitmapsz; - unsigned long bmppages; - int ret; - - tbl->it_busno = dev->bus->number; - - /* set the tce table size - measured in entries */ - tbl->it_size = table_size_to_number_of_entries(specified_table_size); - - /* - * number of bytes needed for the bitmap size in number of - * entries; we need one bit per entry - */ - bitmapsz = tbl->it_size / BITS_PER_BYTE; - bmppages = __get_free_pages(GFP_KERNEL, get_order(bitmapsz)); - if (!bmppages) { - printk(KERN_ERR "Calgary: cannot allocate bitmap\n"); - ret = -ENOMEM; - goto done; - } - - tbl->it_map = (unsigned long*)bmppages; - - memset(tbl->it_map, 0, bitmapsz); - - tbl->it_hint = 0; - - spin_lock_init(&tbl->it_lock); - - return 0; - -done: - return ret; -} - -int __init build_tce_table(struct pci_dev *dev, void __iomem *bbar) -{ - struct iommu_table *tbl; - int ret; - - if (pci_iommu(dev->bus)) { - printk(KERN_ERR "Calgary: dev %p has sysdata->iommu %p\n", - dev, pci_iommu(dev->bus)); - BUG(); - } - - tbl = kzalloc(sizeof(struct iommu_table), GFP_KERNEL); - if (!tbl) { - printk(KERN_ERR "Calgary: error allocating iommu_table\n"); - ret = -ENOMEM; - goto done; - } - - ret = tce_table_setparms(dev, tbl); - if (ret) - goto free_tbl; - - tbl->bbar = bbar; - - set_pci_iommu(dev->bus, tbl); - - return 0; - -free_tbl: - kfree(tbl); -done: - return ret; -} - -void * __init alloc_tce_table(void) -{ - unsigned int size; - - size = table_size_to_number_of_entries(specified_table_size); - size *= TCE_ENTRY_SIZE; - - return __alloc_bootmem_low(size, size, 0); -} - -void __init free_tce_table(void *tbl) -{ - unsigned int size; - - if (!tbl) - return; - - size = table_size_to_number_of_entries(specified_table_size); - size *= TCE_ENTRY_SIZE; - - free_bootmem(__pa(tbl), size); -} diff --git a/arch/x86_64/kernel/time_64.c b/arch/x86_64/kernel/time_64.c deleted file mode 100644 index 6d48a4e826d..00000000000 --- a/arch/x86_64/kernel/time_64.c +++ /dev/null @@ -1,447 +0,0 @@ -/* - * linux/arch/x86-64/kernel/time.c - * - * "High Precision Event Timer" based timekeeping. - * - * Copyright (c) 1991,1992,1995 Linus Torvalds - * Copyright (c) 1994 Alan Modra - * Copyright (c) 1995 Markus Kuhn - * Copyright (c) 1996 Ingo Molnar - * Copyright (c) 1998 Andrea Arcangeli - * Copyright (c) 2002,2006 Vojtech Pavlik - * Copyright (c) 2003 Andi Kleen - * RTC support code taken from arch/i386/kernel/timers/time_hpet.c - */ - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/mc146818rtc.h> -#include <linux/time.h> -#include <linux/ioport.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/sysdev.h> -#include <linux/bcd.h> -#include <linux/notifier.h> -#include <linux/cpu.h> -#include <linux/kallsyms.h> -#include <linux/acpi.h> -#ifdef CONFIG_ACPI -#include <acpi/achware.h> /* for PM timer frequency */ -#include <acpi/acpi_bus.h> -#endif -#include <asm/8253pit.h> -#include <asm/i8253.h> -#include <asm/pgtable.h> -#include <asm/vsyscall.h> -#include <asm/timex.h> -#include <asm/proto.h> -#include <asm/hpet.h> -#include <asm/sections.h> -#include <linux/hpet.h> -#include <asm/apic.h> -#include <asm/hpet.h> -#include <asm/mpspec.h> -#include <asm/nmi.h> -#include <asm/vgtod.h> - -static char *timename = NULL; - -DEFINE_SPINLOCK(rtc_lock); -EXPORT_SYMBOL(rtc_lock); -DEFINE_SPINLOCK(i8253_lock); -EXPORT_SYMBOL(i8253_lock); - -volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES; - -unsigned long profile_pc(struct pt_regs *regs) -{ - unsigned long pc = instruction_pointer(regs); - - /* Assume the lock function has either no stack frame or a copy - of eflags from PUSHF - Eflags always has bits 22 and up cleared unlike kernel addresses. */ - if (!user_mode(regs) && in_lock_functions(pc)) { - unsigned long *sp = (unsigned long *)regs->rsp; - if (sp[0] >> 22) - return sp[0]; - if (sp[1] >> 22) - return sp[1]; - } - return pc; -} -EXPORT_SYMBOL(profile_pc); - -/* - * In order to set the CMOS clock precisely, set_rtc_mmss has to be called 500 - * ms after the second nowtime has started, because when nowtime is written - * into the registers of the CMOS clock, it will jump to the next second - * precisely 500 ms later. Check the Motorola MC146818A or Dallas DS12887 data - * sheet for details. - */ - -static int set_rtc_mmss(unsigned long nowtime) -{ - int retval = 0; - int real_seconds, real_minutes, cmos_minutes; - unsigned char control, freq_select; - -/* - * IRQs are disabled when we're called from the timer interrupt, - * no need for spin_lock_irqsave() - */ - - spin_lock(&rtc_lock); - -/* - * Tell the clock it's being set and stop it. - */ - - control = CMOS_READ(RTC_CONTROL); - CMOS_WRITE(control | RTC_SET, RTC_CONTROL); - - freq_select = CMOS_READ(RTC_FREQ_SELECT); - CMOS_WRITE(freq_select | RTC_DIV_RESET2, RTC_FREQ_SELECT); - - cmos_minutes = CMOS_READ(RTC_MINUTES); - BCD_TO_BIN(cmos_minutes); - -/* - * since we're only adjusting minutes and seconds, don't interfere with hour - * overflow. This avoids messing with unknown time zones but requires your RTC - * not to be off by more than 15 minutes. Since we're calling it only when - * our clock is externally synchronized using NTP, this shouldn't be a problem. - */ - - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - cmos_minutes) >= 30) { - printk(KERN_WARNING "time.c: can't update CMOS clock " - "from %d to %d\n", cmos_minutes, real_minutes); - retval = -1; - } else { - BIN_TO_BCD(real_seconds); - BIN_TO_BCD(real_minutes); - CMOS_WRITE(real_seconds, RTC_SECONDS); - CMOS_WRITE(real_minutes, RTC_MINUTES); - } - -/* - * The following flags have to be released exactly in this order, otherwise the - * DS12887 (popular MC146818A clone with integrated battery and quartz) will - * not reset the oscillator and will not update precisely 500 ms later. You - * won't find this mentioned in the Dallas Semiconductor data sheets, but who - * believes data sheets anyway ... -- Markus Kuhn - */ - - CMOS_WRITE(control, RTC_CONTROL); - CMOS_WRITE(freq_select, RTC_FREQ_SELECT); - - spin_unlock(&rtc_lock); - - return retval; -} - -int update_persistent_clock(struct timespec now) -{ - return set_rtc_mmss(now.tv_sec); -} - -void main_timer_handler(void) -{ -/* - * Here we are in the timer irq handler. We have irqs locally disabled (so we - * don't need spin_lock_irqsave()) but we don't know if the timer_bh is running - * on the other CPU, so we need a lock. We also need to lock the vsyscall - * variables, because both do_timer() and us change them -arca+vojtech - */ - - write_seqlock(&xtime_lock); - -/* - * Do the timer stuff. - */ - - do_timer(1); -#ifndef CONFIG_SMP - update_process_times(user_mode(get_irq_regs())); -#endif - -/* - * In the SMP case we use the local APIC timer interrupt to do the profiling, - * except when we simulate SMP mode on a uniprocessor system, in that case we - * have to call the local interrupt handler. - */ - - if (!using_apic_timer) - smp_local_timer_interrupt(); - - write_sequnlock(&xtime_lock); -} - -static irqreturn_t timer_interrupt(int irq, void *dev_id) -{ - if (apic_runs_main_timer > 1) - return IRQ_HANDLED; - main_timer_handler(); - if (using_apic_timer) - smp_send_timer_broadcast_ipi(); - return IRQ_HANDLED; -} - -unsigned long read_persistent_clock(void) -{ - unsigned int year, mon, day, hour, min, sec; - unsigned long flags; - unsigned century = 0; - - spin_lock_irqsave(&rtc_lock, flags); - - do { - sec = CMOS_READ(RTC_SECONDS); - min = CMOS_READ(RTC_MINUTES); - hour = CMOS_READ(RTC_HOURS); - day = CMOS_READ(RTC_DAY_OF_MONTH); - mon = CMOS_READ(RTC_MONTH); - year = CMOS_READ(RTC_YEAR); -#ifdef CONFIG_ACPI - if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID && - acpi_gbl_FADT.century) - century = CMOS_READ(acpi_gbl_FADT.century); -#endif - } while (sec != CMOS_READ(RTC_SECONDS)); - - spin_unlock_irqrestore(&rtc_lock, flags); - - /* - * We know that x86-64 always uses BCD format, no need to check the - * config register. - */ - - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year); - - if (century) { - BCD_TO_BIN(century); - year += century * 100; - printk(KERN_INFO "Extended CMOS year: %d\n", century * 100); - } else { - /* - * x86-64 systems only exists since 2002. - * This will work up to Dec 31, 2100 - */ - year += 2000; - } - - return mktime(year, mon, day, hour, min, sec); -} - -/* calibrate_cpu is used on systems with fixed rate TSCs to determine - * processor frequency */ -#define TICK_COUNT 100000000 -static unsigned int __init tsc_calibrate_cpu_khz(void) -{ - int tsc_start, tsc_now; - int i, no_ctr_free; - unsigned long evntsel3 = 0, pmc3 = 0, pmc_now = 0; - unsigned long flags; - - for (i = 0; i < 4; i++) - if (avail_to_resrv_perfctr_nmi_bit(i)) - break; - no_ctr_free = (i == 4); - if (no_ctr_free) { - i = 3; - rdmsrl(MSR_K7_EVNTSEL3, evntsel3); - wrmsrl(MSR_K7_EVNTSEL3, 0); - rdmsrl(MSR_K7_PERFCTR3, pmc3); - } else { - reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i); - reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i); - } - local_irq_save(flags); - /* start meauring cycles, incrementing from 0 */ - wrmsrl(MSR_K7_PERFCTR0 + i, 0); - wrmsrl(MSR_K7_EVNTSEL0 + i, 1 << 22 | 3 << 16 | 0x76); - rdtscl(tsc_start); - do { - rdmsrl(MSR_K7_PERFCTR0 + i, pmc_now); - tsc_now = get_cycles_sync(); - } while ((tsc_now - tsc_start) < TICK_COUNT); - - local_irq_restore(flags); - if (no_ctr_free) { - wrmsrl(MSR_K7_EVNTSEL3, 0); - wrmsrl(MSR_K7_PERFCTR3, pmc3); - wrmsrl(MSR_K7_EVNTSEL3, evntsel3); - } else { - release_perfctr_nmi(MSR_K7_PERFCTR0 + i); - release_evntsel_nmi(MSR_K7_EVNTSEL0 + i); - } - - return pmc_now * tsc_khz / (tsc_now - tsc_start); -} - -/* - * pit_calibrate_tsc() uses the speaker output (channel 2) of - * the PIT. This is better than using the timer interrupt output, - * because we can read the value of the speaker with just one inb(), - * where we need three i/o operations for the interrupt channel. - * We count how many ticks the TSC does in 50 ms. - */ - -static unsigned int __init pit_calibrate_tsc(void) -{ - unsigned long start, end; - unsigned long flags; - - spin_lock_irqsave(&i8253_lock, flags); - - outb((inb(0x61) & ~0x02) | 0x01, 0x61); - - outb(0xb0, 0x43); - outb((PIT_TICK_RATE / (1000 / 50)) & 0xff, 0x42); - outb((PIT_TICK_RATE / (1000 / 50)) >> 8, 0x42); - start = get_cycles_sync(); - while ((inb(0x61) & 0x20) == 0); - end = get_cycles_sync(); - - spin_unlock_irqrestore(&i8253_lock, flags); - - return (end - start) / 50; -} - -#define PIT_MODE 0x43 -#define PIT_CH0 0x40 - -static void __pit_init(int val, u8 mode) -{ - unsigned long flags; - - spin_lock_irqsave(&i8253_lock, flags); - outb_p(mode, PIT_MODE); - outb_p(val & 0xff, PIT_CH0); /* LSB */ - outb_p(val >> 8, PIT_CH0); /* MSB */ - spin_unlock_irqrestore(&i8253_lock, flags); -} - -void __init pit_init(void) -{ - __pit_init(LATCH, 0x34); /* binary, mode 2, LSB/MSB, ch 0 */ -} - -void pit_stop_interrupt(void) -{ - __pit_init(0, 0x30); /* mode 0 */ -} - -void stop_timer_interrupt(void) -{ - char *name; - if (hpet_address) { - name = "HPET"; - hpet_timer_stop_set_go(0); - } else { - name = "PIT"; - pit_stop_interrupt(); - } - printk(KERN_INFO "timer: %s interrupt stopped.\n", name); -} - -static struct irqaction irq0 = { - .handler = timer_interrupt, - .flags = IRQF_DISABLED | IRQF_IRQPOLL, - .mask = CPU_MASK_NONE, - .name = "timer" -}; - -void __init time_init(void) -{ - if (nohpet) - hpet_address = 0; - - if (hpet_arch_init()) - hpet_address = 0; - - if (hpet_use_timer) { - /* set tick_nsec to use the proper rate for HPET */ - tick_nsec = TICK_NSEC_HPET; - tsc_khz = hpet_calibrate_tsc(); - timename = "HPET"; - } else { - pit_init(); - tsc_khz = pit_calibrate_tsc(); - timename = "PIT"; - } - - cpu_khz = tsc_khz; - if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) && - boot_cpu_data.x86_vendor == X86_VENDOR_AMD && - boot_cpu_data.x86 == 16) - cpu_khz = tsc_calibrate_cpu_khz(); - - if (unsynchronized_tsc()) - mark_tsc_unstable("TSCs unsynchronized"); - - if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP)) - vgetcpu_mode = VGETCPU_RDTSCP; - else - vgetcpu_mode = VGETCPU_LSL; - - set_cyc2ns_scale(tsc_khz); - printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n", - cpu_khz / 1000, cpu_khz % 1000); - init_tsc_clocksource(); - - setup_irq(0, &irq0); -} - -/* - * sysfs support for the timer. - */ - -static int timer_suspend(struct sys_device *dev, pm_message_t state) -{ - return 0; -} - -static int timer_resume(struct sys_device *dev) -{ - if (hpet_address) - hpet_reenable(); - else - i8254_timer_resume(); - return 0; -} - -static struct sysdev_class timer_sysclass = { - .resume = timer_resume, - .suspend = timer_suspend, - set_kset_name("timer"), -}; - -/* XXX this sysfs stuff should probably go elsewhere later -john */ -static struct sys_device device_timer = { - .id = 0, - .cls = &timer_sysclass, -}; - -static int time_init_device(void) -{ - int error = sysdev_class_register(&timer_sysclass); - if (!error) - error = sysdev_register(&device_timer); - return error; -} - -device_initcall(time_init_device); diff --git a/arch/x86_64/kernel/trampoline_64.S b/arch/x86_64/kernel/trampoline_64.S deleted file mode 100644 index 607983b0d27..00000000000 --- a/arch/x86_64/kernel/trampoline_64.S +++ /dev/null @@ -1,166 +0,0 @@ -/* - * - * Trampoline.S Derived from Setup.S by Linus Torvalds - * - * 4 Jan 1997 Michael Chastain: changed to gnu as. - * 15 Sept 2005 Eric Biederman: 64bit PIC support - * - * Entry: CS:IP point to the start of our code, we are - * in real mode with no stack, but the rest of the - * trampoline page to make our stack and everything else - * is a mystery. - * - * In fact we don't actually need a stack so we don't - * set one up. - * - * On entry to trampoline_data, the processor is in real mode - * with 16-bit addressing and 16-bit data. CS has some value - * and IP is zero. Thus, data addresses need to be absolute - * (no relocation) and are taken with regard to r_base. - * - * With the addition of trampoline_level4_pgt this code can - * now enter a 64bit kernel that lives at arbitrary 64bit - * physical addresses. - * - * If you work on this file, check the object module with objdump - * --full-contents --reloc to make sure there are no relocation - * entries. - */ - -#include <linux/linkage.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/msr.h> -#include <asm/segment.h> - -.data - -.code16 - -ENTRY(trampoline_data) -r_base = . - cli # We should be safe anyway - wbinvd - mov %cs, %ax # Code and data in the same place - mov %ax, %ds - mov %ax, %es - mov %ax, %ss - - - movl $0xA5A5A5A5, trampoline_data - r_base - # write marker for master knows we're running - - # Setup stack - movw $(trampoline_stack_end - r_base), %sp - - call verify_cpu # Verify the cpu supports long mode - testl %eax, %eax # Check for return code - jnz no_longmode - - mov %cs, %ax - movzx %ax, %esi # Find the 32bit trampoline location - shll $4, %esi - - # Fixup the vectors - addl %esi, startup_32_vector - r_base - addl %esi, startup_64_vector - r_base - addl %esi, tgdt + 2 - r_base # Fixup the gdt pointer - - /* - * GDT tables in non default location kernel can be beyond 16MB and - * lgdt will not be able to load the address as in real mode default - * operand size is 16bit. Use lgdtl instead to force operand size - * to 32 bit. - */ - - lidtl tidt - r_base # load idt with 0, 0 - lgdtl tgdt - r_base # load gdt with whatever is appropriate - - xor %ax, %ax - inc %ax # protected mode (PE) bit - lmsw %ax # into protected mode - - # flush prefetch and jump to startup_32 - ljmpl *(startup_32_vector - r_base) - - .code32 - .balign 4 -startup_32: - movl $__KERNEL_DS, %eax # Initialize the %ds segment register - movl %eax, %ds - - xorl %eax, %eax - btsl $5, %eax # Enable PAE mode - movl %eax, %cr4 - - # Setup trampoline 4 level pagetables - leal (trampoline_level4_pgt - r_base)(%esi), %eax - movl %eax, %cr3 - - movl $MSR_EFER, %ecx - movl $(1 << _EFER_LME), %eax # Enable Long Mode - xorl %edx, %edx - wrmsr - - xorl %eax, %eax - btsl $31, %eax # Enable paging and in turn activate Long Mode - btsl $0, %eax # Enable protected mode - movl %eax, %cr0 - - /* - * At this point we're in long mode but in 32bit compatibility mode - * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn - * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use - * the new gdt/idt that has __KERNEL_CS with CS.L = 1. - */ - ljmp *(startup_64_vector - r_base)(%esi) - - .code64 - .balign 4 -startup_64: - # Now jump into the kernel using virtual addresses - movq $secondary_startup_64, %rax - jmp *%rax - - .code16 -no_longmode: - hlt - jmp no_longmode -#include "verify_cpu_64.S" - - # Careful these need to be in the same 64K segment as the above; -tidt: - .word 0 # idt limit = 0 - .word 0, 0 # idt base = 0L - - # Duplicate the global descriptor table - # so the kernel can live anywhere - .balign 4 -tgdt: - .short tgdt_end - tgdt # gdt limit - .long tgdt - r_base - .short 0 - .quad 0x00cf9b000000ffff # __KERNEL32_CS - .quad 0x00af9b000000ffff # __KERNEL_CS - .quad 0x00cf93000000ffff # __KERNEL_DS -tgdt_end: - - .balign 4 -startup_32_vector: - .long startup_32 - r_base - .word __KERNEL32_CS, 0 - - .balign 4 -startup_64_vector: - .long startup_64 - r_base - .word __KERNEL_CS, 0 - -trampoline_stack: - .org 0x1000 -trampoline_stack_end: -ENTRY(trampoline_level4_pgt) - .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE - .fill 510,8,0 - .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE - -ENTRY(trampoline_end) diff --git a/arch/x86_64/kernel/traps_64.c b/arch/x86_64/kernel/traps_64.c deleted file mode 100644 index 03888420775..00000000000 --- a/arch/x86_64/kernel/traps_64.c +++ /dev/null @@ -1,1138 +0,0 @@ -/* - * linux/arch/x86-64/traps.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - * Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs - * - * Pentium III FXSR, SSE support - * Gareth Hughes <gareth@valinux.com>, May 2000 - */ - -/* - * 'Traps.c' handles hardware traps and faults after we have saved some - * state in 'entry.S'. - */ -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/ptrace.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/kallsyms.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/nmi.h> -#include <linux/kprobes.h> -#include <linux/kexec.h> -#include <linux/unwind.h> -#include <linux/uaccess.h> -#include <linux/bug.h> -#include <linux/kdebug.h> - -#if defined(CONFIG_EDAC) -#include <linux/edac.h> -#endif - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/atomic.h> -#include <asm/debugreg.h> -#include <asm/desc.h> -#include <asm/i387.h> -#include <asm/processor.h> -#include <asm/unwind.h> -#include <asm/smp.h> -#include <asm/pgalloc.h> -#include <asm/pda.h> -#include <asm/proto.h> -#include <asm/nmi.h> -#include <asm/stacktrace.h> - -asmlinkage void divide_error(void); -asmlinkage void debug(void); -asmlinkage void nmi(void); -asmlinkage void int3(void); -asmlinkage void overflow(void); -asmlinkage void bounds(void); -asmlinkage void invalid_op(void); -asmlinkage void device_not_available(void); -asmlinkage void double_fault(void); -asmlinkage void coprocessor_segment_overrun(void); -asmlinkage void invalid_TSS(void); -asmlinkage void segment_not_present(void); -asmlinkage void stack_segment(void); -asmlinkage void general_protection(void); -asmlinkage void page_fault(void); -asmlinkage void coprocessor_error(void); -asmlinkage void simd_coprocessor_error(void); -asmlinkage void reserved(void); -asmlinkage void alignment_check(void); -asmlinkage void machine_check(void); -asmlinkage void spurious_interrupt_bug(void); - -static inline void conditional_sti(struct pt_regs *regs) -{ - if (regs->eflags & X86_EFLAGS_IF) - local_irq_enable(); -} - -static inline void preempt_conditional_sti(struct pt_regs *regs) -{ - preempt_disable(); - if (regs->eflags & X86_EFLAGS_IF) - local_irq_enable(); -} - -static inline void preempt_conditional_cli(struct pt_regs *regs) -{ - if (regs->eflags & X86_EFLAGS_IF) - local_irq_disable(); - /* Make sure to not schedule here because we could be running - on an exception stack. */ - preempt_enable_no_resched(); -} - -int kstack_depth_to_print = 12; - -#ifdef CONFIG_KALLSYMS -void printk_address(unsigned long address) -{ - unsigned long offset = 0, symsize; - const char *symname; - char *modname; - char *delim = ":"; - char namebuf[128]; - - symname = kallsyms_lookup(address, &symsize, &offset, - &modname, namebuf); - if (!symname) { - printk(" [<%016lx>]\n", address); - return; - } - if (!modname) - modname = delim = ""; - printk(" [<%016lx>] %s%s%s%s+0x%lx/0x%lx\n", - address, delim, modname, delim, symname, offset, symsize); -} -#else -void printk_address(unsigned long address) -{ - printk(" [<%016lx>]\n", address); -} -#endif - -static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, - unsigned *usedp, char **idp) -{ - static char ids[][8] = { - [DEBUG_STACK - 1] = "#DB", - [NMI_STACK - 1] = "NMI", - [DOUBLEFAULT_STACK - 1] = "#DF", - [STACKFAULT_STACK - 1] = "#SS", - [MCE_STACK - 1] = "#MC", -#if DEBUG_STKSZ > EXCEPTION_STKSZ - [N_EXCEPTION_STACKS ... N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]" -#endif - }; - unsigned k; - - /* - * Iterate over all exception stacks, and figure out whether - * 'stack' is in one of them: - */ - for (k = 0; k < N_EXCEPTION_STACKS; k++) { - unsigned long end = per_cpu(orig_ist, cpu).ist[k]; - /* - * Is 'stack' above this exception frame's end? - * If yes then skip to the next frame. - */ - if (stack >= end) - continue; - /* - * Is 'stack' above this exception frame's start address? - * If yes then we found the right frame. - */ - if (stack >= end - EXCEPTION_STKSZ) { - /* - * Make sure we only iterate through an exception - * stack once. If it comes up for the second time - * then there's something wrong going on - just - * break out and return NULL: - */ - if (*usedp & (1U << k)) - break; - *usedp |= 1U << k; - *idp = ids[k]; - return (unsigned long *)end; - } - /* - * If this is a debug stack, and if it has a larger size than - * the usual exception stacks, then 'stack' might still - * be within the lower portion of the debug stack: - */ -#if DEBUG_STKSZ > EXCEPTION_STKSZ - if (k == DEBUG_STACK - 1 && stack >= end - DEBUG_STKSZ) { - unsigned j = N_EXCEPTION_STACKS - 1; - - /* - * Black magic. A large debug stack is composed of - * multiple exception stack entries, which we - * iterate through now. Dont look: - */ - do { - ++j; - end -= EXCEPTION_STKSZ; - ids[j][4] = '1' + (j - N_EXCEPTION_STACKS); - } while (stack < end - EXCEPTION_STKSZ); - if (*usedp & (1U << j)) - break; - *usedp |= 1U << j; - *idp = ids[j]; - return (unsigned long *)end; - } -#endif - } - return NULL; -} - -#define MSG(txt) ops->warning(data, txt) - -/* - * x86-64 can have upto three kernel stacks: - * process stack - * interrupt stack - * severe exception (double fault, nmi, stack fault, debug, mce) hardware stack - */ - -static inline int valid_stack_ptr(struct thread_info *tinfo, void *p) -{ - void *t = (void *)tinfo; - return p > t && p < t + THREAD_SIZE - 3; -} - -void dump_trace(struct task_struct *tsk, struct pt_regs *regs, - unsigned long *stack, - struct stacktrace_ops *ops, void *data) -{ - const unsigned cpu = get_cpu(); - unsigned long *irqstack_end = (unsigned long*)cpu_pda(cpu)->irqstackptr; - unsigned used = 0; - struct thread_info *tinfo; - - if (!tsk) - tsk = current; - - if (!stack) { - unsigned long dummy; - stack = &dummy; - if (tsk && tsk != current) - stack = (unsigned long *)tsk->thread.rsp; - } - - /* - * Print function call entries within a stack. 'cond' is the - * "end of stackframe" condition, that the 'stack++' - * iteration will eventually trigger. - */ -#define HANDLE_STACK(cond) \ - do while (cond) { \ - unsigned long addr = *stack++; \ - /* Use unlocked access here because except for NMIs \ - we should be already protected against module unloads */ \ - if (__kernel_text_address(addr)) { \ - /* \ - * If the address is either in the text segment of the \ - * kernel, or in the region which contains vmalloc'ed \ - * memory, it *may* be the address of a calling \ - * routine; if so, print it so that someone tracing \ - * down the cause of the crash will be able to figure \ - * out the call path that was taken. \ - */ \ - ops->address(data, addr); \ - } \ - } while (0) - - /* - * Print function call entries in all stacks, starting at the - * current stack address. If the stacks consist of nested - * exceptions - */ - for (;;) { - char *id; - unsigned long *estack_end; - estack_end = in_exception_stack(cpu, (unsigned long)stack, - &used, &id); - - if (estack_end) { - if (ops->stack(data, id) < 0) - break; - HANDLE_STACK (stack < estack_end); - ops->stack(data, "<EOE>"); - /* - * We link to the next stack via the - * second-to-last pointer (index -2 to end) in the - * exception stack: - */ - stack = (unsigned long *) estack_end[-2]; - continue; - } - if (irqstack_end) { - unsigned long *irqstack; - irqstack = irqstack_end - - (IRQSTACKSIZE - 64) / sizeof(*irqstack); - - if (stack >= irqstack && stack < irqstack_end) { - if (ops->stack(data, "IRQ") < 0) - break; - HANDLE_STACK (stack < irqstack_end); - /* - * We link to the next stack (which would be - * the process stack normally) the last - * pointer (index -1 to end) in the IRQ stack: - */ - stack = (unsigned long *) (irqstack_end[-1]); - irqstack_end = NULL; - ops->stack(data, "EOI"); - continue; - } - } - break; - } - - /* - * This handles the process stack: - */ - tinfo = task_thread_info(tsk); - HANDLE_STACK (valid_stack_ptr(tinfo, stack)); -#undef HANDLE_STACK - put_cpu(); -} -EXPORT_SYMBOL(dump_trace); - -static void -print_trace_warning_symbol(void *data, char *msg, unsigned long symbol) -{ - print_symbol(msg, symbol); - printk("\n"); -} - -static void print_trace_warning(void *data, char *msg) -{ - printk("%s\n", msg); -} - -static int print_trace_stack(void *data, char *name) -{ - printk(" <%s> ", name); - return 0; -} - -static void print_trace_address(void *data, unsigned long addr) -{ - touch_nmi_watchdog(); - printk_address(addr); -} - -static struct stacktrace_ops print_trace_ops = { - .warning = print_trace_warning, - .warning_symbol = print_trace_warning_symbol, - .stack = print_trace_stack, - .address = print_trace_address, -}; - -void -show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long *stack) -{ - printk("\nCall Trace:\n"); - dump_trace(tsk, regs, stack, &print_trace_ops, NULL); - printk("\n"); -} - -static void -_show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long *rsp) -{ - unsigned long *stack; - int i; - const int cpu = smp_processor_id(); - unsigned long *irqstack_end = (unsigned long *) (cpu_pda(cpu)->irqstackptr); - unsigned long *irqstack = (unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE); - - // debugging aid: "show_stack(NULL, NULL);" prints the - // back trace for this cpu. - - if (rsp == NULL) { - if (tsk) - rsp = (unsigned long *)tsk->thread.rsp; - else - rsp = (unsigned long *)&rsp; - } - - stack = rsp; - for(i=0; i < kstack_depth_to_print; i++) { - if (stack >= irqstack && stack <= irqstack_end) { - if (stack == irqstack_end) { - stack = (unsigned long *) (irqstack_end[-1]); - printk(" <EOI> "); - } - } else { - if (((long) stack & (THREAD_SIZE-1)) == 0) - break; - } - if (i && ((i % 4) == 0)) - printk("\n"); - printk(" %016lx", *stack++); - touch_nmi_watchdog(); - } - show_trace(tsk, regs, rsp); -} - -void show_stack(struct task_struct *tsk, unsigned long * rsp) -{ - _show_stack(tsk, NULL, rsp); -} - -/* - * The architecture-independent dump_stack generator - */ -void dump_stack(void) -{ - unsigned long dummy; - show_trace(NULL, NULL, &dummy); -} - -EXPORT_SYMBOL(dump_stack); - -void show_registers(struct pt_regs *regs) -{ - int i; - int in_kernel = !user_mode(regs); - unsigned long rsp; - const int cpu = smp_processor_id(); - struct task_struct *cur = cpu_pda(cpu)->pcurrent; - - rsp = regs->rsp; - printk("CPU %d ", cpu); - __show_regs(regs); - printk("Process %s (pid: %d, threadinfo %p, task %p)\n", - cur->comm, cur->pid, task_thread_info(cur), cur); - - /* - * When in-kernel, we also print out the stack and code at the - * time of the fault.. - */ - if (in_kernel) { - printk("Stack: "); - _show_stack(NULL, regs, (unsigned long*)rsp); - - printk("\nCode: "); - if (regs->rip < PAGE_OFFSET) - goto bad; - - for (i=0; i<20; i++) { - unsigned char c; - if (__get_user(c, &((unsigned char*)regs->rip)[i])) { -bad: - printk(" Bad RIP value."); - break; - } - printk("%02x ", c); - } - } - printk("\n"); -} - -int is_valid_bugaddr(unsigned long rip) -{ - unsigned short ud2; - - if (__copy_from_user(&ud2, (const void __user *) rip, sizeof(ud2))) - return 0; - - return ud2 == 0x0b0f; -} - -#ifdef CONFIG_BUG -void out_of_line_bug(void) -{ - BUG(); -} -EXPORT_SYMBOL(out_of_line_bug); -#endif - -static DEFINE_SPINLOCK(die_lock); -static int die_owner = -1; -static unsigned int die_nest_count; - -unsigned __kprobes long oops_begin(void) -{ - int cpu; - unsigned long flags; - - oops_enter(); - - /* racy, but better than risking deadlock. */ - local_irq_save(flags); - cpu = smp_processor_id(); - if (!spin_trylock(&die_lock)) { - if (cpu == die_owner) - /* nested oops. should stop eventually */; - else - spin_lock(&die_lock); - } - die_nest_count++; - die_owner = cpu; - console_verbose(); - bust_spinlocks(1); - return flags; -} - -void __kprobes oops_end(unsigned long flags) -{ - die_owner = -1; - bust_spinlocks(0); - die_nest_count--; - if (die_nest_count) - /* We still own the lock */ - local_irq_restore(flags); - else - /* Nest count reaches zero, release the lock. */ - spin_unlock_irqrestore(&die_lock, flags); - if (panic_on_oops) - panic("Fatal exception"); - oops_exit(); -} - -void __kprobes __die(const char * str, struct pt_regs * regs, long err) -{ - static int die_counter; - printk(KERN_EMERG "%s: %04lx [%u] ", str, err & 0xffff,++die_counter); -#ifdef CONFIG_PREEMPT - printk("PREEMPT "); -#endif -#ifdef CONFIG_SMP - printk("SMP "); -#endif -#ifdef CONFIG_DEBUG_PAGEALLOC - printk("DEBUG_PAGEALLOC"); -#endif - printk("\n"); - notify_die(DIE_OOPS, str, regs, err, current->thread.trap_no, SIGSEGV); - show_registers(regs); - add_taint(TAINT_DIE); - /* Executive summary in case the oops scrolled away */ - printk(KERN_ALERT "RIP "); - printk_address(regs->rip); - printk(" RSP <%016lx>\n", regs->rsp); - if (kexec_should_crash(current)) - crash_kexec(regs); -} - -void die(const char * str, struct pt_regs * regs, long err) -{ - unsigned long flags = oops_begin(); - - if (!user_mode(regs)) - report_bug(regs->rip, regs); - - __die(str, regs, err); - oops_end(flags); - do_exit(SIGSEGV); -} - -void __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic) -{ - unsigned long flags = oops_begin(); - - /* - * We are in trouble anyway, lets at least try - * to get a message out. - */ - printk(str, smp_processor_id()); - show_registers(regs); - if (kexec_should_crash(current)) - crash_kexec(regs); - if (do_panic || panic_on_oops) - panic("Non maskable interrupt"); - oops_end(flags); - nmi_exit(); - local_irq_enable(); - do_exit(SIGSEGV); -} - -static void __kprobes do_trap(int trapnr, int signr, char *str, - struct pt_regs * regs, long error_code, - siginfo_t *info) -{ - struct task_struct *tsk = current; - - if (user_mode(regs)) { - /* - * We want error_code and trap_no set for userspace - * faults and kernelspace faults which result in - * die(), but not kernelspace faults which are fixed - * up. die() gives the process no chance to handle - * the signal and notice the kernel fault information, - * so that won't result in polluting the information - * about previously queued, but not yet delivered, - * faults. See also do_general_protection below. - */ - tsk->thread.error_code = error_code; - tsk->thread.trap_no = trapnr; - - if (show_unhandled_signals && unhandled_signal(tsk, signr) && - printk_ratelimit()) - printk(KERN_INFO - "%s[%d] trap %s rip:%lx rsp:%lx error:%lx\n", - tsk->comm, tsk->pid, str, - regs->rip, regs->rsp, error_code); - - if (info) - force_sig_info(signr, info, tsk); - else - force_sig(signr, tsk); - return; - } - - - /* kernel trap */ - { - const struct exception_table_entry *fixup; - fixup = search_exception_tables(regs->rip); - if (fixup) - regs->rip = fixup->fixup; - else { - tsk->thread.error_code = error_code; - tsk->thread.trap_no = trapnr; - die(str, regs, error_code); - } - return; - } -} - -#define DO_ERROR(trapnr, signr, str, name) \ -asmlinkage void do_##name(struct pt_regs * regs, long error_code) \ -{ \ - if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ - == NOTIFY_STOP) \ - return; \ - conditional_sti(regs); \ - do_trap(trapnr, signr, str, regs, error_code, NULL); \ -} - -#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \ -asmlinkage void do_##name(struct pt_regs * regs, long error_code) \ -{ \ - siginfo_t info; \ - info.si_signo = signr; \ - info.si_errno = 0; \ - info.si_code = sicode; \ - info.si_addr = (void __user *)siaddr; \ - if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ - == NOTIFY_STOP) \ - return; \ - conditional_sti(regs); \ - do_trap(trapnr, signr, str, regs, error_code, &info); \ -} - -DO_ERROR_INFO( 0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->rip) -DO_ERROR( 4, SIGSEGV, "overflow", overflow) -DO_ERROR( 5, SIGSEGV, "bounds", bounds) -DO_ERROR_INFO( 6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->rip) -DO_ERROR( 7, SIGSEGV, "device not available", device_not_available) -DO_ERROR( 9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) -DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS) -DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) -DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0) -DO_ERROR(18, SIGSEGV, "reserved", reserved) - -/* Runs on IST stack */ -asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code) -{ - if (notify_die(DIE_TRAP, "stack segment", regs, error_code, - 12, SIGBUS) == NOTIFY_STOP) - return; - preempt_conditional_sti(regs); - do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL); - preempt_conditional_cli(regs); -} - -asmlinkage void do_double_fault(struct pt_regs * regs, long error_code) -{ - static const char str[] = "double fault"; - struct task_struct *tsk = current; - - /* Return not checked because double check cannot be ignored */ - notify_die(DIE_TRAP, str, regs, error_code, 8, SIGSEGV); - - tsk->thread.error_code = error_code; - tsk->thread.trap_no = 8; - - /* This is always a kernel trap and never fixable (and thus must - never return). */ - for (;;) - die(str, regs, error_code); -} - -asmlinkage void __kprobes do_general_protection(struct pt_regs * regs, - long error_code) -{ - struct task_struct *tsk = current; - - conditional_sti(regs); - - if (user_mode(regs)) { - tsk->thread.error_code = error_code; - tsk->thread.trap_no = 13; - - if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) && - printk_ratelimit()) - printk(KERN_INFO - "%s[%d] general protection rip:%lx rsp:%lx error:%lx\n", - tsk->comm, tsk->pid, - regs->rip, regs->rsp, error_code); - - force_sig(SIGSEGV, tsk); - return; - } - - /* kernel gp */ - { - const struct exception_table_entry *fixup; - fixup = search_exception_tables(regs->rip); - if (fixup) { - regs->rip = fixup->fixup; - return; - } - - tsk->thread.error_code = error_code; - tsk->thread.trap_no = 13; - if (notify_die(DIE_GPF, "general protection fault", regs, - error_code, 13, SIGSEGV) == NOTIFY_STOP) - return; - die("general protection fault", regs, error_code); - } -} - -static __kprobes void -mem_parity_error(unsigned char reason, struct pt_regs * regs) -{ - printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n", - reason); - printk(KERN_EMERG "You have some hardware problem, likely on the PCI bus.\n"); - -#if defined(CONFIG_EDAC) - if(edac_handler_set()) { - edac_atomic_assert_error(); - return; - } -#endif - - if (panic_on_unrecovered_nmi) - panic("NMI: Not continuing"); - - printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); - - /* Clear and disable the memory parity error line. */ - reason = (reason & 0xf) | 4; - outb(reason, 0x61); -} - -static __kprobes void -io_check_error(unsigned char reason, struct pt_regs * regs) -{ - printk("NMI: IOCK error (debug interrupt?)\n"); - show_registers(regs); - - /* Re-enable the IOCK line, wait for a few seconds */ - reason = (reason & 0xf) | 8; - outb(reason, 0x61); - mdelay(2000); - reason &= ~8; - outb(reason, 0x61); -} - -static __kprobes void -unknown_nmi_error(unsigned char reason, struct pt_regs * regs) -{ - printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n", - reason); - printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n"); - - if (panic_on_unrecovered_nmi) - panic("NMI: Not continuing"); - - printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); -} - -/* Runs on IST stack. This code must keep interrupts off all the time. - Nested NMIs are prevented by the CPU. */ -asmlinkage __kprobes void default_do_nmi(struct pt_regs *regs) -{ - unsigned char reason = 0; - int cpu; - - cpu = smp_processor_id(); - - /* Only the BSP gets external NMIs from the system. */ - if (!cpu) - reason = get_nmi_reason(); - - if (!(reason & 0xc0)) { - if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT) - == NOTIFY_STOP) - return; - /* - * Ok, so this is none of the documented NMI sources, - * so it must be the NMI watchdog. - */ - if (nmi_watchdog_tick(regs,reason)) - return; - if (!do_nmi_callback(regs,cpu)) - unknown_nmi_error(reason, regs); - - return; - } - if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) - return; - - /* AK: following checks seem to be broken on modern chipsets. FIXME */ - - if (reason & 0x80) - mem_parity_error(reason, regs); - if (reason & 0x40) - io_check_error(reason, regs); -} - -/* runs on IST stack. */ -asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code) -{ - if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) { - return; - } - preempt_conditional_sti(regs); - do_trap(3, SIGTRAP, "int3", regs, error_code, NULL); - preempt_conditional_cli(regs); -} - -/* Help handler running on IST stack to switch back to user stack - for scheduling or signal handling. The actual stack switch is done in - entry.S */ -asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs) -{ - struct pt_regs *regs = eregs; - /* Did already sync */ - if (eregs == (struct pt_regs *)eregs->rsp) - ; - /* Exception from user space */ - else if (user_mode(eregs)) - regs = task_pt_regs(current); - /* Exception from kernel and interrupts are enabled. Move to - kernel process stack. */ - else if (eregs->eflags & X86_EFLAGS_IF) - regs = (struct pt_regs *)(eregs->rsp -= sizeof(struct pt_regs)); - if (eregs != regs) - *regs = *eregs; - return regs; -} - -/* runs on IST stack. */ -asmlinkage void __kprobes do_debug(struct pt_regs * regs, - unsigned long error_code) -{ - unsigned long condition; - struct task_struct *tsk = current; - siginfo_t info; - - get_debugreg(condition, 6); - - if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code, - SIGTRAP) == NOTIFY_STOP) - return; - - preempt_conditional_sti(regs); - - /* Mask out spurious debug traps due to lazy DR7 setting */ - if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) { - if (!tsk->thread.debugreg7) { - goto clear_dr7; - } - } - - tsk->thread.debugreg6 = condition; - - /* Mask out spurious TF errors due to lazy TF clearing */ - if (condition & DR_STEP) { - /* - * The TF error should be masked out only if the current - * process is not traced and if the TRAP flag has been set - * previously by a tracing process (condition detected by - * the PT_DTRACE flag); remember that the i386 TRAP flag - * can be modified by the process itself in user mode, - * allowing programs to debug themselves without the ptrace() - * interface. - */ - if (!user_mode(regs)) - goto clear_TF_reenable; - /* - * Was the TF flag set by a debugger? If so, clear it now, - * so that register information is correct. - */ - if (tsk->ptrace & PT_DTRACE) { - regs->eflags &= ~TF_MASK; - tsk->ptrace &= ~PT_DTRACE; - } - } - - /* Ok, finally something we can handle */ - tsk->thread.trap_no = 1; - tsk->thread.error_code = error_code; - info.si_signo = SIGTRAP; - info.si_errno = 0; - info.si_code = TRAP_BRKPT; - info.si_addr = user_mode(regs) ? (void __user *)regs->rip : NULL; - force_sig_info(SIGTRAP, &info, tsk); - -clear_dr7: - set_debugreg(0UL, 7); - preempt_conditional_cli(regs); - return; - -clear_TF_reenable: - set_tsk_thread_flag(tsk, TIF_SINGLESTEP); - regs->eflags &= ~TF_MASK; - preempt_conditional_cli(regs); -} - -static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr) -{ - const struct exception_table_entry *fixup; - fixup = search_exception_tables(regs->rip); - if (fixup) { - regs->rip = fixup->fixup; - return 1; - } - notify_die(DIE_GPF, str, regs, 0, trapnr, SIGFPE); - /* Illegal floating point operation in the kernel */ - current->thread.trap_no = trapnr; - die(str, regs, 0); - return 0; -} - -/* - * Note that we play around with the 'TS' bit in an attempt to get - * the correct behaviour even in the presence of the asynchronous - * IRQ13 behaviour - */ -asmlinkage void do_coprocessor_error(struct pt_regs *regs) -{ - void __user *rip = (void __user *)(regs->rip); - struct task_struct * task; - siginfo_t info; - unsigned short cwd, swd; - - conditional_sti(regs); - if (!user_mode(regs) && - kernel_math_error(regs, "kernel x87 math error", 16)) - return; - - /* - * Save the info for the exception handler and clear the error. - */ - task = current; - save_init_fpu(task); - task->thread.trap_no = 16; - task->thread.error_code = 0; - info.si_signo = SIGFPE; - info.si_errno = 0; - info.si_code = __SI_FAULT; - info.si_addr = rip; - /* - * (~cwd & swd) will mask out exceptions that are not set to unmasked - * status. 0x3f is the exception bits in these regs, 0x200 is the - * C1 reg you need in case of a stack fault, 0x040 is the stack - * fault bit. We should only be taking one exception at a time, - * so if this combination doesn't produce any single exception, - * then we have a bad program that isn't synchronizing its FPU usage - * and it will suffer the consequences since we won't be able to - * fully reproduce the context of the exception - */ - cwd = get_fpu_cwd(task); - swd = get_fpu_swd(task); - switch (swd & ~cwd & 0x3f) { - case 0x000: - default: - break; - case 0x001: /* Invalid Op */ - /* - * swd & 0x240 == 0x040: Stack Underflow - * swd & 0x240 == 0x240: Stack Overflow - * User must clear the SF bit (0x40) if set - */ - info.si_code = FPE_FLTINV; - break; - case 0x002: /* Denormalize */ - case 0x010: /* Underflow */ - info.si_code = FPE_FLTUND; - break; - case 0x004: /* Zero Divide */ - info.si_code = FPE_FLTDIV; - break; - case 0x008: /* Overflow */ - info.si_code = FPE_FLTOVF; - break; - case 0x020: /* Precision */ - info.si_code = FPE_FLTRES; - break; - } - force_sig_info(SIGFPE, &info, task); -} - -asmlinkage void bad_intr(void) -{ - printk("bad interrupt"); -} - -asmlinkage void do_simd_coprocessor_error(struct pt_regs *regs) -{ - void __user *rip = (void __user *)(regs->rip); - struct task_struct * task; - siginfo_t info; - unsigned short mxcsr; - - conditional_sti(regs); - if (!user_mode(regs) && - kernel_math_error(regs, "kernel simd math error", 19)) - return; - - /* - * Save the info for the exception handler and clear the error. - */ - task = current; - save_init_fpu(task); - task->thread.trap_no = 19; - task->thread.error_code = 0; - info.si_signo = SIGFPE; - info.si_errno = 0; - info.si_code = __SI_FAULT; - info.si_addr = rip; - /* - * The SIMD FPU exceptions are handled a little differently, as there - * is only a single status/control register. Thus, to determine which - * unmasked exception was caught we must mask the exception mask bits - * at 0x1f80, and then use these to mask the exception bits at 0x3f. - */ - mxcsr = get_fpu_mxcsr(task); - switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) { - case 0x000: - default: - break; - case 0x001: /* Invalid Op */ - info.si_code = FPE_FLTINV; - break; - case 0x002: /* Denormalize */ - case 0x010: /* Underflow */ - info.si_code = FPE_FLTUND; - break; - case 0x004: /* Zero Divide */ - info.si_code = FPE_FLTDIV; - break; - case 0x008: /* Overflow */ - info.si_code = FPE_FLTOVF; - break; - case 0x020: /* Precision */ - info.si_code = FPE_FLTRES; - break; - } - force_sig_info(SIGFPE, &info, task); -} - -asmlinkage void do_spurious_interrupt_bug(struct pt_regs * regs) -{ -} - -asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void) -{ -} - -asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void) -{ -} - -/* - * 'math_state_restore()' saves the current math information in the - * old math state array, and gets the new ones from the current task - * - * Careful.. There are problems with IBM-designed IRQ13 behaviour. - * Don't touch unless you *really* know how it works. - */ -asmlinkage void math_state_restore(void) -{ - struct task_struct *me = current; - clts(); /* Allow maths ops (or we recurse) */ - - if (!used_math()) - init_fpu(me); - restore_fpu_checking(&me->thread.i387.fxsave); - task_thread_info(me)->status |= TS_USEDFPU; - me->fpu_counter++; -} - -void __init trap_init(void) -{ - set_intr_gate(0,÷_error); - set_intr_gate_ist(1,&debug,DEBUG_STACK); - set_intr_gate_ist(2,&nmi,NMI_STACK); - set_system_gate_ist(3,&int3,DEBUG_STACK); /* int3 can be called from all */ - set_system_gate(4,&overflow); /* int4 can be called from all */ - set_intr_gate(5,&bounds); - set_intr_gate(6,&invalid_op); - set_intr_gate(7,&device_not_available); - set_intr_gate_ist(8,&double_fault, DOUBLEFAULT_STACK); - set_intr_gate(9,&coprocessor_segment_overrun); - set_intr_gate(10,&invalid_TSS); - set_intr_gate(11,&segment_not_present); - set_intr_gate_ist(12,&stack_segment,STACKFAULT_STACK); - set_intr_gate(13,&general_protection); - set_intr_gate(14,&page_fault); - set_intr_gate(15,&spurious_interrupt_bug); - set_intr_gate(16,&coprocessor_error); - set_intr_gate(17,&alignment_check); -#ifdef CONFIG_X86_MCE - set_intr_gate_ist(18,&machine_check, MCE_STACK); -#endif - set_intr_gate(19,&simd_coprocessor_error); - -#ifdef CONFIG_IA32_EMULATION - set_system_gate(IA32_SYSCALL_VECTOR, ia32_syscall); -#endif - - /* - * Should be a barrier for any external CPU state. - */ - cpu_init(); -} - - -static int __init oops_setup(char *s) -{ - if (!s) - return -EINVAL; - if (!strcmp(s, "panic")) - panic_on_oops = 1; - return 0; -} -early_param("oops", oops_setup); - -static int __init kstack_setup(char *s) -{ - if (!s) - return -EINVAL; - kstack_depth_to_print = simple_strtoul(s,NULL,0); - return 0; -} -early_param("kstack", kstack_setup); diff --git a/arch/x86_64/kernel/tsc_64.c b/arch/x86_64/kernel/tsc_64.c deleted file mode 100644 index 2a59bde663f..00000000000 --- a/arch/x86_64/kernel/tsc_64.c +++ /dev/null @@ -1,207 +0,0 @@ -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/clocksource.h> -#include <linux/time.h> -#include <linux/acpi.h> -#include <linux/cpufreq.h> - -#include <asm/timex.h> - -static int notsc __initdata = 0; - -unsigned int cpu_khz; /* TSC clocks / usec, not used here */ -EXPORT_SYMBOL(cpu_khz); -unsigned int tsc_khz; -EXPORT_SYMBOL(tsc_khz); - -static unsigned int cyc2ns_scale __read_mostly; - -void set_cyc2ns_scale(unsigned long khz) -{ - cyc2ns_scale = (NSEC_PER_MSEC << NS_SCALE) / khz; -} - -static unsigned long long cycles_2_ns(unsigned long long cyc) -{ - return (cyc * cyc2ns_scale) >> NS_SCALE; -} - -unsigned long long sched_clock(void) -{ - unsigned long a = 0; - - /* Could do CPU core sync here. Opteron can execute rdtsc speculatively, - * which means it is not completely exact and may not be monotonous - * between CPUs. But the errors should be too small to matter for - * scheduling purposes. - */ - - rdtscll(a); - return cycles_2_ns(a); -} - -static int tsc_unstable; - -inline int check_tsc_unstable(void) -{ - return tsc_unstable; -} -#ifdef CONFIG_CPU_FREQ - -/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency - * changes. - * - * RED-PEN: On SMP we assume all CPUs run with the same frequency. It's - * not that important because current Opteron setups do not support - * scaling on SMP anyroads. - * - * Should fix up last_tsc too. Currently gettimeofday in the - * first tick after the change will be slightly wrong. - */ - -static unsigned int ref_freq; -static unsigned long loops_per_jiffy_ref; -static unsigned long tsc_khz_ref; - -static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, - void *data) -{ - struct cpufreq_freqs *freq = data; - unsigned long *lpj, dummy; - - if (cpu_has(&cpu_data[freq->cpu], X86_FEATURE_CONSTANT_TSC)) - return 0; - - lpj = &dummy; - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) -#ifdef CONFIG_SMP - lpj = &cpu_data[freq->cpu].loops_per_jiffy; -#else - lpj = &boot_cpu_data.loops_per_jiffy; -#endif - - if (!ref_freq) { - ref_freq = freq->old; - loops_per_jiffy_ref = *lpj; - tsc_khz_ref = tsc_khz; - } - if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || - (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || - (val == CPUFREQ_RESUMECHANGE)) { - *lpj = - cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new); - - tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new); - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) - mark_tsc_unstable("cpufreq changes"); - } - - set_cyc2ns_scale(tsc_khz_ref); - - return 0; -} - -static struct notifier_block time_cpufreq_notifier_block = { - .notifier_call = time_cpufreq_notifier -}; - -static int __init cpufreq_tsc(void) -{ - cpufreq_register_notifier(&time_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - return 0; -} - -core_initcall(cpufreq_tsc); - -#endif - -/* - * Make an educated guess if the TSC is trustworthy and synchronized - * over all CPUs. - */ -__cpuinit int unsynchronized_tsc(void) -{ - if (tsc_unstable) - return 1; - -#ifdef CONFIG_SMP - if (apic_is_clustered_box()) - return 1; -#endif - /* Most intel systems have synchronized TSCs except for - multi node systems */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) { -#ifdef CONFIG_ACPI - /* But TSC doesn't tick in C3 so don't use it there */ - if (acpi_gbl_FADT.header.length > 0 && - acpi_gbl_FADT.C3latency < 1000) - return 1; -#endif - return 0; - } - - /* Assume multi socket systems are not synchronized */ - return num_present_cpus() > 1; -} - -int __init notsc_setup(char *s) -{ - notsc = 1; - return 1; -} - -__setup("notsc", notsc_setup); - - -/* clock source code: */ -static cycle_t read_tsc(void) -{ - cycle_t ret = (cycle_t)get_cycles_sync(); - return ret; -} - -static cycle_t __vsyscall_fn vread_tsc(void) -{ - cycle_t ret = (cycle_t)get_cycles_sync(); - return ret; -} - -static struct clocksource clocksource_tsc = { - .name = "tsc", - .rating = 300, - .read = read_tsc, - .mask = CLOCKSOURCE_MASK(64), - .shift = 22, - .flags = CLOCK_SOURCE_IS_CONTINUOUS | - CLOCK_SOURCE_MUST_VERIFY, - .vread = vread_tsc, -}; - -void mark_tsc_unstable(char *reason) -{ - if (!tsc_unstable) { - tsc_unstable = 1; - printk("Marking TSC unstable due to %s\n", reason); - /* Change only the rating, when not registered */ - if (clocksource_tsc.mult) - clocksource_change_rating(&clocksource_tsc, 0); - else - clocksource_tsc.rating = 0; - } -} -EXPORT_SYMBOL_GPL(mark_tsc_unstable); - -void __init init_tsc_clocksource(void) -{ - if (!notsc) { - clocksource_tsc.mult = clocksource_khz2mult(tsc_khz, - clocksource_tsc.shift); - if (check_tsc_unstable()) - clocksource_tsc.rating = 0; - - clocksource_register(&clocksource_tsc); - } -} diff --git a/arch/x86_64/kernel/tsc_sync.c b/arch/x86_64/kernel/tsc_sync.c deleted file mode 100644 index 355f5f506c8..00000000000 --- a/arch/x86_64/kernel/tsc_sync.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * arch/x86_64/kernel/tsc_sync.c: check TSC synchronization. - * - * Copyright (C) 2006, Red Hat, Inc., Ingo Molnar - * - * We check whether all boot CPUs have their TSC's synchronized, - * print a warning if not and turn off the TSC clock-source. - * - * The warp-check is point-to-point between two CPUs, the CPU - * initiating the bootup is the 'source CPU', the freshly booting - * CPU is the 'target CPU'. - * - * Only two CPUs may participate - they can enter in any order. - * ( The serial nature of the boot logic and the CPU hotplug lock - * protects against more than 2 CPUs entering this code. ) - */ -#include <linux/spinlock.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/nmi.h> -#include <asm/tsc.h> - -/* - * Entry/exit counters that make sure that both CPUs - * run the measurement code at once: - */ -static __cpuinitdata atomic_t start_count; -static __cpuinitdata atomic_t stop_count; - -/* - * We use a raw spinlock in this exceptional case, because - * we want to have the fastest, inlined, non-debug version - * of a critical section, to be able to prove TSC time-warps: - */ -static __cpuinitdata raw_spinlock_t sync_lock = __RAW_SPIN_LOCK_UNLOCKED; -static __cpuinitdata cycles_t last_tsc; -static __cpuinitdata cycles_t max_warp; -static __cpuinitdata int nr_warps; - -/* - * TSC-warp measurement loop running on both CPUs: - */ -static __cpuinit void check_tsc_warp(void) -{ - cycles_t start, now, prev, end; - int i; - - start = get_cycles_sync(); - /* - * The measurement runs for 20 msecs: - */ - end = start + tsc_khz * 20ULL; - now = start; - - for (i = 0; ; i++) { - /* - * We take the global lock, measure TSC, save the - * previous TSC that was measured (possibly on - * another CPU) and update the previous TSC timestamp. - */ - __raw_spin_lock(&sync_lock); - prev = last_tsc; - now = get_cycles_sync(); - last_tsc = now; - __raw_spin_unlock(&sync_lock); - - /* - * Be nice every now and then (and also check whether - * measurement is done [we also insert a 100 million - * loops safety exit, so we dont lock up in case the - * TSC readout is totally broken]): - */ - if (unlikely(!(i & 7))) { - if (now > end || i > 100000000) - break; - cpu_relax(); - touch_nmi_watchdog(); - } - /* - * Outside the critical section we can now see whether - * we saw a time-warp of the TSC going backwards: - */ - if (unlikely(prev > now)) { - __raw_spin_lock(&sync_lock); - max_warp = max(max_warp, prev - now); - nr_warps++; - __raw_spin_unlock(&sync_lock); - } - - } -} - -/* - * Source CPU calls into this - it waits for the freshly booted - * target CPU to arrive and then starts the measurement: - */ -void __cpuinit check_tsc_sync_source(int cpu) -{ - int cpus = 2; - - /* - * No need to check if we already know that the TSC is not - * synchronized: - */ - if (unsynchronized_tsc()) - return; - - printk(KERN_INFO "checking TSC synchronization [CPU#%d -> CPU#%d]:", - smp_processor_id(), cpu); - - /* - * Reset it - in case this is a second bootup: - */ - atomic_set(&stop_count, 0); - - /* - * Wait for the target to arrive: - */ - while (atomic_read(&start_count) != cpus-1) - cpu_relax(); - /* - * Trigger the target to continue into the measurement too: - */ - atomic_inc(&start_count); - - check_tsc_warp(); - - while (atomic_read(&stop_count) != cpus-1) - cpu_relax(); - - /* - * Reset it - just in case we boot another CPU later: - */ - atomic_set(&start_count, 0); - - if (nr_warps) { - printk("\n"); - printk(KERN_WARNING "Measured %Ld cycles TSC warp between CPUs," - " turning off TSC clock.\n", max_warp); - mark_tsc_unstable("check_tsc_sync_source failed"); - nr_warps = 0; - max_warp = 0; - last_tsc = 0; - } else { - printk(" passed.\n"); - } - - /* - * Let the target continue with the bootup: - */ - atomic_inc(&stop_count); -} - -/* - * Freshly booted CPUs call into this: - */ -void __cpuinit check_tsc_sync_target(void) -{ - int cpus = 2; - - if (unsynchronized_tsc()) - return; - - /* - * Register this CPU's participation and wait for the - * source CPU to start the measurement: - */ - atomic_inc(&start_count); - while (atomic_read(&start_count) != cpus) - cpu_relax(); - - check_tsc_warp(); - - /* - * Ok, we are done: - */ - atomic_inc(&stop_count); - - /* - * Wait for the source CPU to print stuff: - */ - while (atomic_read(&stop_count) != cpus) - cpu_relax(); -} -#undef NR_LOOPS - diff --git a/arch/x86_64/kernel/verify_cpu_64.S b/arch/x86_64/kernel/verify_cpu_64.S deleted file mode 100644 index 45b6f8a975a..00000000000 --- a/arch/x86_64/kernel/verify_cpu_64.S +++ /dev/null @@ -1,105 +0,0 @@ -/* - * - * verify_cpu.S - Code for cpu long mode and SSE verification. This - * code has been borrowed from boot/setup.S and was introduced by - * Andi Kleen. - * - * Copyright (c) 2007 Andi Kleen (ak@suse.de) - * Copyright (c) 2007 Eric Biederman (ebiederm@xmission.com) - * Copyright (c) 2007 Vivek Goyal (vgoyal@in.ibm.com) - * - * This source code is licensed under the GNU General Public License, - * Version 2. See the file COPYING for more details. - * - * This is a common code for verification whether CPU supports - * long mode and SSE or not. It is not called directly instead this - * file is included at various places and compiled in that context. - * Following are the current usage. - * - * This file is included by both 16bit and 32bit code. - * - * arch/x86_64/boot/setup.S : Boot cpu verification (16bit) - * arch/x86_64/boot/compressed/head.S: Boot cpu verification (32bit) - * arch/x86_64/kernel/trampoline.S: secondary processor verfication (16bit) - * arch/x86_64/kernel/acpi/wakeup.S:Verfication at resume (16bit) - * - * verify_cpu, returns the status of cpu check in register %eax. - * 0: Success 1: Failure - * - * The caller needs to check for the error code and take the action - * appropriately. Either display a message or halt. - */ - -#include <asm/cpufeature.h> - -verify_cpu: - pushfl # Save caller passed flags - pushl $0 # Kill any dangerous flags - popfl - - pushfl # standard way to check for cpuid - popl %eax - movl %eax,%ebx - xorl $0x200000,%eax - pushl %eax - popfl - pushfl - popl %eax - cmpl %eax,%ebx - jz verify_cpu_no_longmode # cpu has no cpuid - - movl $0x0,%eax # See if cpuid 1 is implemented - cpuid - cmpl $0x1,%eax - jb verify_cpu_no_longmode # no cpuid 1 - - xor %di,%di - cmpl $0x68747541,%ebx # AuthenticAMD - jnz verify_cpu_noamd - cmpl $0x69746e65,%edx - jnz verify_cpu_noamd - cmpl $0x444d4163,%ecx - jnz verify_cpu_noamd - mov $1,%di # cpu is from AMD - -verify_cpu_noamd: - movl $0x1,%eax # Does the cpu have what it takes - cpuid - andl $REQUIRED_MASK0,%edx - xorl $REQUIRED_MASK0,%edx - jnz verify_cpu_no_longmode - - movl $0x80000000,%eax # See if extended cpuid is implemented - cpuid - cmpl $0x80000001,%eax - jb verify_cpu_no_longmode # no extended cpuid - - movl $0x80000001,%eax # Does the cpu have what it takes - cpuid - andl $REQUIRED_MASK1,%edx - xorl $REQUIRED_MASK1,%edx - jnz verify_cpu_no_longmode - -verify_cpu_sse_test: - movl $1,%eax - cpuid - andl $SSE_MASK,%edx - cmpl $SSE_MASK,%edx - je verify_cpu_sse_ok - test %di,%di - jz verify_cpu_no_longmode # only try to force SSE on AMD - movl $0xc0010015,%ecx # HWCR - rdmsr - btr $15,%eax # enable SSE - wrmsr - xor %di,%di # don't loop - jmp verify_cpu_sse_test # try again - -verify_cpu_no_longmode: - popfl # Restore caller passed flags - movl $1,%eax - ret -verify_cpu_sse_ok: - popfl # Restore caller passed flags - xorl %eax, %eax - ret diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S deleted file mode 100644 index 849ee611f01..00000000000 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ /dev/null @@ -1,5 +0,0 @@ -#ifdef CONFIG_X86_32 -# include "vmlinux_32.lds.S" -#else -# include "vmlinux_64.lds.S" -#endif diff --git a/arch/x86_64/kernel/vmlinux_64.lds.S b/arch/x86_64/kernel/vmlinux_64.lds.S deleted file mode 100644 index ba8ea97abd2..00000000000 --- a/arch/x86_64/kernel/vmlinux_64.lds.S +++ /dev/null @@ -1,235 +0,0 @@ -/* ld script to make x86-64 Linux kernel - * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>; - */ - -#define LOAD_OFFSET __START_KERNEL_map - -#include <asm-generic/vmlinux.lds.h> -#include <asm/page.h> - -#undef i386 /* in case the preprocessor is a 32bit one */ - -OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64") -OUTPUT_ARCH(i386:x86-64) -ENTRY(phys_startup_64) -jiffies_64 = jiffies; -_proxy_pda = 1; -PHDRS { - text PT_LOAD FLAGS(5); /* R_E */ - data PT_LOAD FLAGS(7); /* RWE */ - user PT_LOAD FLAGS(7); /* RWE */ - data.init PT_LOAD FLAGS(7); /* RWE */ - note PT_NOTE FLAGS(4); /* R__ */ -} -SECTIONS -{ - . = __START_KERNEL; - phys_startup_64 = startup_64 - LOAD_OFFSET; - _text = .; /* Text and read-only data */ - .text : AT(ADDR(.text) - LOAD_OFFSET) { - /* First the code that has to be first for bootstrapping */ - *(.text.head) - _stext = .; - /* Then the rest */ - TEXT_TEXT - SCHED_TEXT - LOCK_TEXT - KPROBES_TEXT - *(.fixup) - *(.gnu.warning) - } :text = 0x9090 - /* out-of-line lock text */ - .text.lock : AT(ADDR(.text.lock) - LOAD_OFFSET) { *(.text.lock) } - - _etext = .; /* End of text section */ - - . = ALIGN(16); /* Exception table */ - __start___ex_table = .; - __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { *(__ex_table) } - __stop___ex_table = .; - - NOTES :text :note - - BUG_TABLE :text - - RODATA - - . = ALIGN(4); - .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { - __tracedata_start = .; - *(.tracedata) - __tracedata_end = .; - } - - . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */ - /* Data */ - .data : AT(ADDR(.data) - LOAD_OFFSET) { - DATA_DATA - CONSTRUCTORS - } :data - - _edata = .; /* End of data section */ - - . = ALIGN(PAGE_SIZE); - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { - *(.data.cacheline_aligned) - } - . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES); - .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { - *(.data.read_mostly) - } - -#define VSYSCALL_ADDR (-10*1024*1024) -#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095)) -#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095)) - -#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR) -#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET) - -#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR) -#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET) - - . = VSYSCALL_ADDR; - .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) } :user - __vsyscall_0 = VSYSCALL_VIRT_ADDR; - - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) { *(.vsyscall_fn) } - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) - { *(.vsyscall_gtod_data) } - vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data); - .vsyscall_clock : AT(VLOAD(.vsyscall_clock)) - { *(.vsyscall_clock) } - vsyscall_clock = VVIRT(.vsyscall_clock); - - - .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) - { *(.vsyscall_1) } - .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) - { *(.vsyscall_2) } - - .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) } - vgetcpu_mode = VVIRT(.vgetcpu_mode); - - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - .jiffies : AT(VLOAD(.jiffies)) { *(.jiffies) } - jiffies = VVIRT(.jiffies); - - .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) - { *(.vsyscall_3) } - - . = VSYSCALL_VIRT_ADDR + 4096; - -#undef VSYSCALL_ADDR -#undef VSYSCALL_PHYS_ADDR -#undef VSYSCALL_VIRT_ADDR -#undef VLOAD_OFFSET -#undef VLOAD -#undef VVIRT_OFFSET -#undef VVIRT - - . = ALIGN(8192); /* init_task */ - .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { - *(.data.init_task) - }:data.init - - . = ALIGN(4096); - .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { - *(.data.page_aligned) - } - - /* might get freed after init */ - . = ALIGN(4096); - __smp_alt_begin = .; - __smp_locks = .; - .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { - *(.smp_locks) - } - __smp_locks_end = .; - . = ALIGN(4096); - __smp_alt_end = .; - - . = ALIGN(4096); /* Init code and data */ - __init_begin = .; - .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { - _sinittext = .; - *(.init.text) - _einittext = .; - } - __initdata_begin = .; - .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { *(.init.data) } - __initdata_end = .; - . = ALIGN(16); - __setup_start = .; - .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { *(.init.setup) } - __setup_end = .; - __initcall_start = .; - .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { - INITCALLS - } - __initcall_end = .; - __con_initcall_start = .; - .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { - *(.con_initcall.init) - } - __con_initcall_end = .; - SECURITY_INIT - . = ALIGN(8); - __alt_instructions = .; - .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { - *(.altinstructions) - } - __alt_instructions_end = .; - .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) { - *(.altinstr_replacement) - } - /* .exit.text is discard at runtime, not link time, to deal with references - from .altinstructions and .eh_frame */ - .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { *(.exit.text) } - .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { *(.exit.data) } - -/* vdso blob that is mapped into user space */ - vdso_start = . ; - .vdso : AT(ADDR(.vdso) - LOAD_OFFSET) { *(.vdso) } - . = ALIGN(4096); - vdso_end = .; - -#ifdef CONFIG_BLK_DEV_INITRD - . = ALIGN(4096); - __initramfs_start = .; - .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { *(.init.ramfs) } - __initramfs_end = .; -#endif - - PERCPU(4096) - - . = ALIGN(4096); - __init_end = .; - - . = ALIGN(4096); - __nosave_begin = .; - .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { *(.data.nosave) } - . = ALIGN(4096); - __nosave_end = .; - - __bss_start = .; /* BSS */ - .bss : AT(ADDR(.bss) - LOAD_OFFSET) { - *(.bss.page_aligned) - *(.bss) - } - __bss_stop = .; - - _end = . ; - - /* Sections to be discarded */ - /DISCARD/ : { - *(.exitcall.exit) - *(.eh_frame) - } - - STABS_DEBUG - - DWARF_DEBUG -} diff --git a/arch/x86_64/kernel/vsmp_64.c b/arch/x86_64/kernel/vsmp_64.c deleted file mode 100644 index 414caf0c5f9..00000000000 --- a/arch/x86_64/kernel/vsmp_64.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * vSMPowered(tm) systems specific initialization - * Copyright (C) 2005 ScaleMP Inc. - * - * Use of this code is subject to the terms and conditions of the - * GNU general public license version 2. See "COPYING" or - * http://www.gnu.org/licenses/gpl.html - * - * Ravikiran Thirumalai <kiran@scalemp.com>, - * Shai Fultheim <shai@scalemp.com> - */ - -#include <linux/init.h> -#include <linux/pci_ids.h> -#include <linux/pci_regs.h> -#include <asm/pci-direct.h> -#include <asm/io.h> - -static int __init vsmp_init(void) -{ - void *address; - unsigned int cap, ctl; - - if (!early_pci_allowed()) - return 0; - - /* Check if we are running on a ScaleMP vSMP box */ - if ((read_pci_config_16(0, 0x1f, 0, PCI_VENDOR_ID) != PCI_VENDOR_ID_SCALEMP) || - (read_pci_config_16(0, 0x1f, 0, PCI_DEVICE_ID) != PCI_DEVICE_ID_SCALEMP_VSMP_CTL)) - return 0; - - /* set vSMP magic bits to indicate vSMP capable kernel */ - address = ioremap(read_pci_config(0, 0x1f, 0, PCI_BASE_ADDRESS_0), 8); - cap = readl(address); - ctl = readl(address + 4); - printk("vSMP CTL: capabilities:0x%08x control:0x%08x\n", cap, ctl); - if (cap & ctl & (1 << 4)) { - /* Turn on vSMP IRQ fastpath handling (see system.h) */ - ctl &= ~(1 << 4); - writel(ctl, address + 4); - ctl = readl(address + 4); - printk("vSMP CTL: control set to:0x%08x\n", ctl); - } - - iounmap(address); - return 0; -} - -core_initcall(vsmp_init); diff --git a/arch/x86_64/kernel/vsyscall_64.c b/arch/x86_64/kernel/vsyscall_64.c deleted file mode 100644 index 06c34949bfd..00000000000 --- a/arch/x86_64/kernel/vsyscall_64.c +++ /dev/null @@ -1,349 +0,0 @@ -/* - * linux/arch/x86_64/kernel/vsyscall.c - * - * Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE - * Copyright 2003 Andi Kleen, SuSE Labs. - * - * Thanks to hpa@transmeta.com for some useful hint. - * Special thanks to Ingo Molnar for his early experience with - * a different vsyscall implementation for Linux/IA32 and for the name. - * - * vsyscall 1 is located at -10Mbyte, vsyscall 2 is located - * at virtual address -10Mbyte+1024bytes etc... There are at max 4 - * vsyscalls. One vsyscall can reserve more than 1 slot to avoid - * jumping out of line if necessary. We cannot add more with this - * mechanism because older kernels won't return -ENOSYS. - * If we want more than four we need a vDSO. - * - * Note: the concept clashes with user mode linux. If you use UML and - * want per guest time just set the kernel.vsyscall64 sysctl to 0. - */ - -#include <linux/time.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/seqlock.h> -#include <linux/jiffies.h> -#include <linux/sysctl.h> -#include <linux/clocksource.h> -#include <linux/getcpu.h> -#include <linux/cpu.h> -#include <linux/smp.h> -#include <linux/notifier.h> - -#include <asm/vsyscall.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/unistd.h> -#include <asm/fixmap.h> -#include <asm/errno.h> -#include <asm/io.h> -#include <asm/segment.h> -#include <asm/desc.h> -#include <asm/topology.h> -#include <asm/vgtod.h> - -#define __vsyscall(nr) __attribute__ ((unused,__section__(".vsyscall_" #nr))) -#define __syscall_clobber "r11","rcx","memory" -#define __pa_vsymbol(x) \ - ({unsigned long v; \ - extern char __vsyscall_0; \ - asm("" : "=r" (v) : "0" (x)); \ - ((v - VSYSCALL_FIRST_PAGE) + __pa_symbol(&__vsyscall_0)); }) - -/* - * vsyscall_gtod_data contains data that is : - * - readonly from vsyscalls - * - writen by timer interrupt or systcl (/proc/sys/kernel/vsyscall64) - * Try to keep this structure as small as possible to avoid cache line ping pongs - */ -int __vgetcpu_mode __section_vgetcpu_mode; - -struct vsyscall_gtod_data __vsyscall_gtod_data __section_vsyscall_gtod_data = -{ - .lock = SEQLOCK_UNLOCKED, - .sysctl_enabled = 1, -}; - -void update_vsyscall(struct timespec *wall_time, struct clocksource *clock) -{ - unsigned long flags; - - write_seqlock_irqsave(&vsyscall_gtod_data.lock, flags); - /* copy vsyscall data */ - vsyscall_gtod_data.clock.vread = clock->vread; - vsyscall_gtod_data.clock.cycle_last = clock->cycle_last; - vsyscall_gtod_data.clock.mask = clock->mask; - vsyscall_gtod_data.clock.mult = clock->mult; - vsyscall_gtod_data.clock.shift = clock->shift; - vsyscall_gtod_data.wall_time_sec = wall_time->tv_sec; - vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec; - vsyscall_gtod_data.sys_tz = sys_tz; - vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec; - vsyscall_gtod_data.wall_to_monotonic = wall_to_monotonic; - write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags); -} - -/* RED-PEN may want to readd seq locking, but then the variable should be - * write-once. - */ -static __always_inline void do_get_tz(struct timezone * tz) -{ - *tz = __vsyscall_gtod_data.sys_tz; -} - -static __always_inline int gettimeofday(struct timeval *tv, struct timezone *tz) -{ - int ret; - asm volatile("vsysc2: syscall" - : "=a" (ret) - : "0" (__NR_gettimeofday),"D" (tv),"S" (tz) - : __syscall_clobber ); - return ret; -} - -static __always_inline long time_syscall(long *t) -{ - long secs; - asm volatile("vsysc1: syscall" - : "=a" (secs) - : "0" (__NR_time),"D" (t) : __syscall_clobber); - return secs; -} - -static __always_inline void do_vgettimeofday(struct timeval * tv) -{ - cycle_t now, base, mask, cycle_delta; - unsigned seq; - unsigned long mult, shift, nsec; - cycle_t (*vread)(void); - do { - seq = read_seqbegin(&__vsyscall_gtod_data.lock); - - vread = __vsyscall_gtod_data.clock.vread; - if (unlikely(!__vsyscall_gtod_data.sysctl_enabled || !vread)) { - gettimeofday(tv,NULL); - return; - } - now = vread(); - base = __vsyscall_gtod_data.clock.cycle_last; - mask = __vsyscall_gtod_data.clock.mask; - mult = __vsyscall_gtod_data.clock.mult; - shift = __vsyscall_gtod_data.clock.shift; - - tv->tv_sec = __vsyscall_gtod_data.wall_time_sec; - nsec = __vsyscall_gtod_data.wall_time_nsec; - } while (read_seqretry(&__vsyscall_gtod_data.lock, seq)); - - /* calculate interval: */ - cycle_delta = (now - base) & mask; - /* convert to nsecs: */ - nsec += (cycle_delta * mult) >> shift; - - while (nsec >= NSEC_PER_SEC) { - tv->tv_sec += 1; - nsec -= NSEC_PER_SEC; - } - tv->tv_usec = nsec / NSEC_PER_USEC; -} - -int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz) -{ - if (tv) - do_vgettimeofday(tv); - if (tz) - do_get_tz(tz); - return 0; -} - -/* This will break when the xtime seconds get inaccurate, but that is - * unlikely */ -time_t __vsyscall(1) vtime(time_t *t) -{ - struct timeval tv; - time_t result; - if (unlikely(!__vsyscall_gtod_data.sysctl_enabled)) - return time_syscall(t); - - vgettimeofday(&tv, 0); - result = tv.tv_sec; - if (t) - *t = result; - return result; -} - -/* Fast way to get current CPU and node. - This helps to do per node and per CPU caches in user space. - The result is not guaranteed without CPU affinity, but usually - works out because the scheduler tries to keep a thread on the same - CPU. - - tcache must point to a two element sized long array. - All arguments can be NULL. */ -long __vsyscall(2) -vgetcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache) -{ - unsigned int dummy, p; - unsigned long j = 0; - - /* Fast cache - only recompute value once per jiffies and avoid - relatively costly rdtscp/cpuid otherwise. - This works because the scheduler usually keeps the process - on the same CPU and this syscall doesn't guarantee its - results anyways. - We do this here because otherwise user space would do it on - its own in a likely inferior way (no access to jiffies). - If you don't like it pass NULL. */ - if (tcache && tcache->blob[0] == (j = __jiffies)) { - p = tcache->blob[1]; - } else if (__vgetcpu_mode == VGETCPU_RDTSCP) { - /* Load per CPU data from RDTSCP */ - rdtscp(dummy, dummy, p); - } else { - /* Load per CPU data from GDT */ - asm("lsl %1,%0" : "=r" (p) : "r" (__PER_CPU_SEG)); - } - if (tcache) { - tcache->blob[0] = j; - tcache->blob[1] = p; - } - if (cpu) - *cpu = p & 0xfff; - if (node) - *node = p >> 12; - return 0; -} - -long __vsyscall(3) venosys_1(void) -{ - return -ENOSYS; -} - -#ifdef CONFIG_SYSCTL - -#define SYSCALL 0x050f -#define NOP2 0x9090 - -/* - * NOP out syscall in vsyscall page when not needed. - */ -static int vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp, - void __user *buffer, size_t *lenp, loff_t *ppos) -{ - extern u16 vsysc1, vsysc2; - u16 __iomem *map1; - u16 __iomem *map2; - int ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos); - if (!write) - return ret; - /* gcc has some trouble with __va(__pa()), so just do it this - way. */ - map1 = ioremap(__pa_vsymbol(&vsysc1), 2); - if (!map1) - return -ENOMEM; - map2 = ioremap(__pa_vsymbol(&vsysc2), 2); - if (!map2) { - ret = -ENOMEM; - goto out; - } - if (!vsyscall_gtod_data.sysctl_enabled) { - writew(SYSCALL, map1); - writew(SYSCALL, map2); - } else { - writew(NOP2, map1); - writew(NOP2, map2); - } - iounmap(map2); -out: - iounmap(map1); - return ret; -} - -static int vsyscall_sysctl_nostrat(ctl_table *t, int __user *name, int nlen, - void __user *oldval, size_t __user *oldlenp, - void __user *newval, size_t newlen) -{ - return -ENOSYS; -} - -static ctl_table kernel_table2[] = { - { .ctl_name = 99, .procname = "vsyscall64", - .data = &vsyscall_gtod_data.sysctl_enabled, .maxlen = sizeof(int), - .mode = 0644, - .strategy = vsyscall_sysctl_nostrat, - .proc_handler = vsyscall_sysctl_change }, - {} -}; - -static ctl_table kernel_root_table2[] = { - { .ctl_name = CTL_KERN, .procname = "kernel", .mode = 0555, - .child = kernel_table2 }, - {} -}; - -#endif - -/* Assume __initcall executes before all user space. Hopefully kmod - doesn't violate that. We'll find out if it does. */ -static void __cpuinit vsyscall_set_cpu(int cpu) -{ - unsigned long *d; - unsigned long node = 0; -#ifdef CONFIG_NUMA - node = cpu_to_node[cpu]; -#endif - if (cpu_has(&cpu_data[cpu], X86_FEATURE_RDTSCP)) - write_rdtscp_aux((node << 12) | cpu); - - /* Store cpu number in limit so that it can be loaded quickly - in user space in vgetcpu. - 12 bits for the CPU and 8 bits for the node. */ - d = (unsigned long *)(cpu_gdt(cpu) + GDT_ENTRY_PER_CPU); - *d = 0x0f40000000000ULL; - *d |= cpu; - *d |= (node & 0xf) << 12; - *d |= (node >> 4) << 48; -} - -static void __cpuinit cpu_vsyscall_init(void *arg) -{ - /* preemption should be already off */ - vsyscall_set_cpu(raw_smp_processor_id()); -} - -static int __cpuinit -cpu_vsyscall_notifier(struct notifier_block *n, unsigned long action, void *arg) -{ - long cpu = (long)arg; - if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN) - smp_call_function_single(cpu, cpu_vsyscall_init, NULL, 0, 1); - return NOTIFY_DONE; -} - -static void __init map_vsyscall(void) -{ - extern char __vsyscall_0; - unsigned long physaddr_page0 = __pa_symbol(&__vsyscall_0); - - /* Note that VSYSCALL_MAPPED_PAGES must agree with the code below. */ - __set_fixmap(VSYSCALL_FIRST_PAGE, physaddr_page0, PAGE_KERNEL_VSYSCALL); -} - -static int __init vsyscall_init(void) -{ - BUG_ON(((unsigned long) &vgettimeofday != - VSYSCALL_ADDR(__NR_vgettimeofday))); - BUG_ON((unsigned long) &vtime != VSYSCALL_ADDR(__NR_vtime)); - BUG_ON((VSYSCALL_ADDR(0) != __fix_to_virt(VSYSCALL_FIRST_PAGE))); - BUG_ON((unsigned long) &vgetcpu != VSYSCALL_ADDR(__NR_vgetcpu)); - map_vsyscall(); -#ifdef CONFIG_SYSCTL - register_sysctl_table(kernel_root_table2); -#endif - on_each_cpu(cpu_vsyscall_init, NULL, 0, 1); - hotcpu_notifier(cpu_vsyscall_notifier, 0); - return 0; -} - -__initcall(vsyscall_init); diff --git a/arch/x86_64/kernel/x8664_ksyms_64.c b/arch/x86_64/kernel/x8664_ksyms_64.c deleted file mode 100644 index 77c25b30763..00000000000 --- a/arch/x86_64/kernel/x8664_ksyms_64.c +++ /dev/null @@ -1,62 +0,0 @@ -/* Exports for assembly files. - All C exports should go in the respective C files. */ - -#include <linux/module.h> -#include <linux/smp.h> - -#include <asm/semaphore.h> -#include <asm/processor.h> -#include <asm/uaccess.h> -#include <asm/pgtable.h> - -EXPORT_SYMBOL(kernel_thread); - -EXPORT_SYMBOL(__down_failed); -EXPORT_SYMBOL(__down_failed_interruptible); -EXPORT_SYMBOL(__down_failed_trylock); -EXPORT_SYMBOL(__up_wakeup); - -EXPORT_SYMBOL(__get_user_1); -EXPORT_SYMBOL(__get_user_2); -EXPORT_SYMBOL(__get_user_4); -EXPORT_SYMBOL(__get_user_8); -EXPORT_SYMBOL(__put_user_1); -EXPORT_SYMBOL(__put_user_2); -EXPORT_SYMBOL(__put_user_4); -EXPORT_SYMBOL(__put_user_8); - -EXPORT_SYMBOL(copy_user_generic); -EXPORT_SYMBOL(__copy_user_nocache); -EXPORT_SYMBOL(copy_from_user); -EXPORT_SYMBOL(copy_to_user); -EXPORT_SYMBOL(__copy_from_user_inatomic); - -EXPORT_SYMBOL(copy_page); -EXPORT_SYMBOL(clear_page); - -#ifdef CONFIG_SMP -extern void __write_lock_failed(rwlock_t *rw); -extern void __read_lock_failed(rwlock_t *rw); -EXPORT_SYMBOL(__write_lock_failed); -EXPORT_SYMBOL(__read_lock_failed); -#endif - -/* Export string functions. We normally rely on gcc builtin for most of these, - but gcc sometimes decides not to inline them. */ -#undef memcpy -#undef memset -#undef memmove - -extern void * memset(void *,int,__kernel_size_t); -extern void * memcpy(void *,const void *,__kernel_size_t); -extern void * __memcpy(void *,const void *,__kernel_size_t); - -EXPORT_SYMBOL(memset); -EXPORT_SYMBOL(memcpy); -EXPORT_SYMBOL(__memcpy); - -EXPORT_SYMBOL(empty_zero_page); -EXPORT_SYMBOL(init_level4_pgt); -EXPORT_SYMBOL(load_gs_index); - -EXPORT_SYMBOL(_proxy_pda); |