aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/ppc64/Kconfig17
-rw-r--r--arch/ppc64/kernel/Makefile1
-rw-r--r--arch/ppc64/kernel/head.S6
-rw-r--r--arch/ppc64/kernel/machine_kexec.c301
-rw-r--r--arch/ppc64/kernel/misc.S175
-rw-r--r--arch/ppc64/kernel/mpic.c29
-rw-r--r--arch/ppc64/kernel/mpic.h3
-rw-r--r--arch/ppc64/kernel/pSeries_setup.c4
-rw-r--r--arch/ppc64/kernel/setup.c22
-rw-r--r--arch/ppc64/kernel/xics.c25
10 files changed, 566 insertions, 17 deletions
diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig
index 5f40b438b58..f804f25232a 100644
--- a/arch/ppc64/Kconfig
+++ b/arch/ppc64/Kconfig
@@ -142,6 +142,23 @@ config PPC_SPLPAR
processors, that is, which share physical processors between
two or more partitions.
+config KEXEC
+ bool "kexec system call (EXPERIMENTAL)"
+ depends on PPC_MULTIPLATFORM && EXPERIMENTAL
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is indepedent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ The name comes from the similiarity to the exec system call.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. It may help to enable device hotplugging
+ support. As of this writing the exact hardware interface is
+ strongly in flux, so no good recommendation can be made.
+
config IBMVIO
depends on PPC_PSERIES || PPC_ISERIES
bool
diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile
index dffbfb7ac8d..d9b2660ef22 100644
--- a/arch/ppc64/kernel/Makefile
+++ b/arch/ppc64/kernel/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_PPC_PSERIES) += pSeries_pci.o pSeries_lpar.o pSeries_hvCall.o \
obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_iommu.o bpa_nvram.o \
bpa_iic.o spider-pic.o
+obj-$(CONFIG_KEXEC) += machine_kexec.o
obj-$(CONFIG_EEH) += eeh.o
obj-$(CONFIG_PROC_FS) += proc_ppc64.o
obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S
index 02c8f4e3e4b..675c2708588 100644
--- a/arch/ppc64/kernel/head.S
+++ b/arch/ppc64/kernel/head.S
@@ -1194,7 +1194,7 @@ _GLOBAL(pSeries_secondary_smp_init)
bl .__restore_cpu_setup
/* Set up a paca value for this processor. Since we have the
- * physical cpu id in r3, we need to search the pacas to find
+ * physical cpu id in r24, we need to search the pacas to find
* which logical id maps to our physical one.
*/
LOADADDR(r13, paca) /* Get base vaddr of paca array */
@@ -1207,8 +1207,8 @@ _GLOBAL(pSeries_secondary_smp_init)
cmpwi r5,NR_CPUS
blt 1b
-99: HMT_LOW /* Couldn't find our CPU id */
- b 99b
+ mr r3,r24 /* not found, copy phys to r3 */
+ b .kexec_wait /* next kernel might do better */
2: mtspr SPRG3,r13 /* Save vaddr of paca in SPRG3 */
/* From now on, r24 is expected to be logica cpuid */
diff --git a/arch/ppc64/kernel/machine_kexec.c b/arch/ppc64/kernel/machine_kexec.c
new file mode 100644
index 00000000000..217965d60a4
--- /dev/null
+++ b/arch/ppc64/kernel/machine_kexec.c
@@ -0,0 +1,301 @@
+/*
+ * machine_kexec.c - handle transition of Linux booting another kernel
+ *
+ * Copyright (C) 2004-2005, IBM Corp.
+ *
+ * Created by: Milton D Miller II
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+
+#include <linux/cpumask.h>
+#include <linux/kexec.h>
+#include <linux/smp.h>
+#include <linux/thread_info.h>
+#include <linux/errno.h>
+
+#include <asm/page.h>
+#include <asm/current.h>
+#include <asm/machdep.h>
+#include <asm/cacheflush.h>
+#include <asm/paca.h>
+#include <asm/mmu.h>
+#include <asm/sections.h> /* _end */
+#include <asm/prom.h>
+
+#define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */
+
+/* Have this around till we move it into crash specific file */
+note_buf_t crash_notes[NR_CPUS];
+
+/* Dummy for now. Not sure if we need to have a crash shutdown in here
+ * and if what it will achieve. Letting it be now to compile the code
+ * in generic kexec environment
+ */
+void machine_crash_shutdown(void)
+{
+ /* do nothing right now */
+ /* smp_relase_cpus() if we want smp on panic kernel */
+ /* cpu_irq_down to isolate us until we are ready */
+}
+
+int machine_kexec_prepare(struct kimage *image)
+{
+ int i;
+ unsigned long begin, end; /* limits of segment */
+ unsigned long low, high; /* limits of blocked memory range */
+ struct device_node *node;
+ unsigned long *basep;
+ unsigned int *sizep;
+
+ if (!ppc_md.hpte_clear_all)
+ return -ENOENT;
+
+ /*
+ * Since we use the kernel fault handlers and paging code to
+ * handle the virtual mode, we must make sure no destination
+ * overlaps kernel static data or bss.
+ */
+ for(i = 0; i < image->nr_segments; i++)
+ if (image->segment[i].mem < __pa(_end))
+ return -ETXTBSY;
+
+ /*
+ * For non-LPAR, we absolutely can not overwrite the mmu hash
+ * table, since we are still using the bolted entries in it to
+ * do the copy. Check that here.
+ *
+ * It is safe if the end is below the start of the blocked
+ * region (end <= low), or if the beginning is after the
+ * end of the blocked region (begin >= high). Use the
+ * boolean identity !(a || b) === (!a && !b).
+ */
+ if (htab_address) {
+ low = __pa(htab_address);
+ high = low + (htab_hash_mask + 1) * HASH_GROUP_SIZE;
+
+ for(i = 0; i < image->nr_segments; i++) {
+ begin = image->segment[i].mem;
+ end = begin + image->segment[i].memsz;
+
+ if ((begin < high) && (end > low))
+ return -ETXTBSY;
+ }
+ }
+
+ /* We also should not overwrite the tce tables */
+ for (node = of_find_node_by_type(NULL, "pci"); node != NULL;
+ node = of_find_node_by_type(node, "pci")) {
+ basep = (unsigned long *)get_property(node, "linux,tce-base",
+ NULL);
+ sizep = (unsigned int *)get_property(node, "linux,tce-size",
+ NULL);
+ if (basep == NULL || sizep == NULL)
+ continue;
+
+ low = *basep;
+ high = low + (*sizep);
+
+ for(i = 0; i < image->nr_segments; i++) {
+ begin = image->segment[i].mem;
+ end = begin + image->segment[i].memsz;
+
+ if ((begin < high) && (end > low))
+ return -ETXTBSY;
+ }
+ }
+
+ return 0;
+}
+
+void machine_kexec_cleanup(struct kimage *image)
+{
+ /* we do nothing in prepare that needs to be undone */
+}
+
+#define IND_FLAGS (IND_DESTINATION | IND_INDIRECTION | IND_DONE | IND_SOURCE)
+
+static void copy_segments(unsigned long ind)
+{
+ unsigned long entry;
+ unsigned long *ptr;
+ void *dest;
+ void *addr;
+
+ /*
+ * We rely on kexec_load to create a lists that properly
+ * initializes these pointers before they are used.
+ * We will still crash if the list is wrong, but at least
+ * the compiler will be quiet.
+ */
+ ptr = NULL;
+ dest = NULL;
+
+ for (entry = ind; !(entry & IND_DONE); entry = *ptr++) {
+ addr = __va(entry & PAGE_MASK);
+
+ switch (entry & IND_FLAGS) {
+ case IND_DESTINATION:
+ dest = addr;
+ break;
+ case IND_INDIRECTION:
+ ptr = addr;
+ break;
+ case IND_SOURCE:
+ copy_page(dest, addr);
+ dest += PAGE_SIZE;
+ }
+ }
+}
+
+void kexec_copy_flush(struct kimage *image)
+{
+ long i, nr_segments = image->nr_segments;
+ struct kexec_segment ranges[KEXEC_SEGMENT_MAX];
+
+ /* save the ranges on the stack to efficiently flush the icache */
+ memcpy(ranges, image->segment, sizeof(ranges));
+
+ /*
+ * After this call we may not use anything allocated in dynamic
+ * memory, including *image.
+ *
+ * Only globals and the stack are allowed.
+ */
+ copy_segments(image->head);
+
+ /*
+ * we need to clear the icache for all dest pages sometime,
+ * including ones that were in place on the original copy
+ */
+ for (i = 0; i < nr_segments; i++)
+ flush_icache_range(ranges[i].mem + KERNELBASE,
+ ranges[i].mem + KERNELBASE +
+ ranges[i].memsz);
+}
+
+#ifdef CONFIG_SMP
+
+/* FIXME: we should schedule this function to be called on all cpus based
+ * on calling the interrupts, but we would like to call it off irq level
+ * so that the interrupt controller is clean.
+ */
+void kexec_smp_down(void *arg)
+{
+ if (ppc_md.cpu_irq_down)
+ ppc_md.cpu_irq_down();
+
+ local_irq_disable();
+ kexec_smp_wait();
+ /* NOTREACHED */
+}
+
+static void kexec_prepare_cpus(void)
+{
+ int my_cpu, i, notified=-1;
+
+ smp_call_function(kexec_smp_down, NULL, 0, /* wait */0);
+ my_cpu = get_cpu();
+
+ /* check the others cpus are now down (via paca hw cpu id == -1) */
+ for (i=0; i < NR_CPUS; i++) {
+ if (i == my_cpu)
+ continue;
+
+ while (paca[i].hw_cpu_id != -1) {
+ if (!cpu_possible(i)) {
+ printk("kexec: cpu %d hw_cpu_id %d is not"
+ " possible, ignoring\n",
+ i, paca[i].hw_cpu_id);
+ break;
+ }
+ if (!cpu_online(i)) {
+ /* Fixme: this can be spinning in
+ * pSeries_secondary_wait with a paca
+ * waiting for it to go online.
+ */
+ printk("kexec: cpu %d hw_cpu_id %d is not"
+ " online, ignoring\n",
+ i, paca[i].hw_cpu_id);
+ break;
+ }
+ if (i != notified) {
+ printk( "kexec: waiting for cpu %d (physical"
+ " %d) to go down\n",
+ i, paca[i].hw_cpu_id);
+ notified = i;
+ }
+ }
+ }
+
+ /* after we tell the others to go down */
+ if (ppc_md.cpu_irq_down)
+ ppc_md.cpu_irq_down();
+
+ put_cpu();
+
+ local_irq_disable();
+}
+
+#else /* ! SMP */
+
+static void kexec_prepare_cpus(void)
+{
+ /*
+ * move the secondarys to us so that we can copy
+ * the new kernel 0-0x100 safely
+ *
+ * do this if kexec in setup.c ?
+ */
+ smp_relase_cpus();
+ if (ppc_md.cpu_irq_down)
+ ppc_md.cpu_irq_down();
+ local_irq_disable();
+}
+
+#endif /* SMP */
+
+/*
+ * kexec thread structure and stack.
+ *
+ * We need to make sure that this is 16384-byte aligned due to the
+ * way process stacks are handled. It also must be statically allocated
+ * or allocated as part of the kimage, because everything else may be
+ * overwritten when we copy the kexec image. We piggyback on the
+ * "init_task" linker section here to statically allocate a stack.
+ *
+ * We could use a smaller stack if we don't care about anything using
+ * current, but that audit has not been performed.
+ */
+union thread_union kexec_stack
+ __attribute__((__section__(".data.init_task"))) = { };
+
+/* Our assembly helper, in kexec_stub.S */
+extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start,
+ void *image, void *control, void (*clear_all)(void)) ATTRIB_NORET;
+
+/* too late to fail here */
+void machine_kexec(struct kimage *image)
+{
+
+ /* prepare control code if any */
+
+ /* shutdown other cpus into our wait loop and quiesce interrupts */
+ kexec_prepare_cpus();
+
+ /* switch to a staticly allocated stack. Based on irq stack code.
+ * XXX: the task struct will likely be invalid once we do the copy!
+ */
+ kexec_stack.thread_info.task = current_thread_info()->task;
+ kexec_stack.thread_info.flags = 0;
+
+ /* Some things are best done in assembly. Finding globals with
+ * a toc is easier in C, so pass in what we can.
+ */
+ kexec_sequence(&kexec_stack, image->start, image,
+ page_address(image->control_code_page),
+ ppc_md.hpte_clear_all);
+ /* NOTREACHED */
+}
diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S
index e3c73b3425d..f3dea0c5a88 100644
--- a/arch/ppc64/kernel/misc.S
+++ b/arch/ppc64/kernel/misc.S
@@ -680,6 +680,177 @@ _GLOBAL(kernel_thread)
ld r30,-16(r1)
blr
+/* kexec_wait(phys_cpu)
+ *
+ * wait for the flag to change, indicating this kernel is going away but
+ * the slave code for the next one is at addresses 0 to 100.
+ *
+ * This is used by all slaves.
+ *
+ * Physical (hardware) cpu id should be in r3.
+ */
+_GLOBAL(kexec_wait)
+ bl 1f
+1: mflr r5
+ addi r5,r5,kexec_flag-1b
+
+99: HMT_LOW
+#ifdef CONFIG_KEXEC /* use no memory without kexec */
+ lwz r4,0(r5)
+ cmpwi 0,r4,0
+ bnea 0x60
+#endif
+ b 99b
+
+/* this can be in text because we won't change it until we are
+ * running in real anyways
+ */
+kexec_flag:
+ .long 0
+
+
+#ifdef CONFIG_KEXEC
+
+/* kexec_smp_wait(void)
+ *
+ * call with interrupts off
+ * note: this is a terminal routine, it does not save lr
+ *
+ * get phys id from paca
+ * set paca id to -1 to say we got here
+ * switch to real mode
+ * join other cpus in kexec_wait(phys_id)
+ */
+_GLOBAL(kexec_smp_wait)
+ lhz r3,PACAHWCPUID(r13)
+ li r4,-1
+ sth r4,PACAHWCPUID(r13) /* let others know we left */
+ bl real_mode
+ b .kexec_wait
+
+/*
+ * switch to real mode (turn mmu off)
+ * we use the early kernel trick that the hardware ignores bits
+ * 0 and 1 (big endian) of the effective address in real mode
+ *
+ * don't overwrite r3 here, it is live for kexec_wait above.
+ */
+real_mode: /* assume normal blr return */
+1: li r9,MSR_RI
+ li r10,MSR_DR|MSR_IR
+ mflr r11 /* return address to SRR0 */
+ mfmsr r12
+ andc r9,r12,r9
+ andc r10,r12,r10
+
+ mtmsrd r9,1
+ mtspr SPRN_SRR1,r10
+ mtspr SPRN_SRR0,r11
+ rfid
+
+
+/*
+ * kexec_sequence(newstack, start, image, control, clear_all())
+ *
+ * does the grungy work with stack switching and real mode switches
+ * also does simple calls to other code
+ */
+
+_GLOBAL(kexec_sequence)
+ mflr r0
+ std r0,16(r1)
+
+ /* switch stacks to newstack -- &kexec_stack.stack */
+ stdu r1,THREAD_SIZE-112(r3)
+ mr r1,r3
+
+ li r0,0
+ std r0,16(r1)
+
+ /* save regs for local vars on new stack.
+ * yes, we won't go back, but ...
+ */
+ std r31,-8(r1)
+ std r30,-16(r1)
+ std r29,-24(r1)
+ std r28,-32(r1)
+ std r27,-40(r1)
+ std r26,-48(r1)
+ std r25,-56(r1)
+
+ stdu r1,-112-64(r1)
+
+ /* save args into preserved regs */
+ mr r31,r3 /* newstack (both) */
+ mr r30,r4 /* start (real) */
+ mr r29,r5 /* image (virt) */
+ mr r28,r6 /* control, unused */
+ mr r27,r7 /* clear_all() fn desc */
+ mr r26,r8 /* spare */
+ lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */
+
+ /* disable interrupts, we are overwriting kernel data next */
+ mfmsr r3
+ rlwinm r3,r3,0,17,15
+ mtmsrd r3,1
+
+ /* copy dest pages, flush whole dest image */
+ mr r3,r29
+ bl .kexec_copy_flush /* (image) */
+
+ /* turn off mmu */
+ bl real_mode
+
+ /* clear out hardware hash page table and tlb */
+ ld r5,0(r27) /* deref function descriptor */
+ mtctr r5
+ bctrl /* ppc_md.hash_clear_all(void); */
+
+/*
+ * kexec image calling is:
+ * the first 0x100 bytes of the entry point are copied to 0
+ *
+ * all slaves branch to slave = 0x60 (absolute)
+ * slave(phys_cpu_id);
+ *
+ * master goes to start = entry point
+ * start(phys_cpu_id, start, 0);
+ *
+ *
+ * a wrapper is needed to call existing kernels, here is an approximate
+ * description of one method:
+ *
+ * v2: (2.6.10)
+ * start will be near the boot_block (maybe 0x100 bytes before it?)
+ * it will have a 0x60, which will b to boot_block, where it will wait
+ * and 0 will store phys into struct boot-block and load r3 from there,
+ * copy kernel 0-0x100 and tell slaves to back down to 0x60 again
+ *
+ * v1: (2.6.9)
+ * boot block will have all cpus scanning device tree to see if they
+ * are the boot cpu ?????
+ * other device tree differences (prop sizes, va vs pa, etc)...
+ */
+
+ /* copy 0x100 bytes starting at start to 0 */
+ li r3,0
+ mr r4,r30
+ li r5,0x100
+ li r6,0
+ bl .copy_and_flush /* (dest, src, copy limit, start offset) */
+1: /* assume normal blr return */
+
+ /* release other cpus to the new kernel secondary start at 0x60 */
+ mflr r5
+ li r6,1
+ stw r6,kexec_flag-1b(5)
+ mr r3,r25 # my phys cpu
+ mr r4,r30 # start, aka phys mem offset
+ mtlr 4
+ li r5,0
+ blr /* image->start(physid, image->start, 0); */
+#endif /* CONFIG_KEXEC */
+
/* Why isn't this a) automatic, b) written in 'C'? */
.balign 8
_GLOBAL(sys_call_table32)
@@ -951,7 +1122,7 @@ _GLOBAL(sys_call_table32)
.llong .compat_sys_mq_timedreceive /* 265 */
.llong .compat_sys_mq_notify
.llong .compat_sys_mq_getsetattr
- .llong .sys_ni_syscall /* 268 reserved for sys_kexec_load */
+ .llong .compat_sys_kexec_load
.llong .sys32_add_key
.llong .sys32_request_key
.llong .compat_sys_keyctl
@@ -1227,7 +1398,7 @@ _GLOBAL(sys_call_table)
.llong .sys_mq_timedreceive /* 265 */
.llong .sys_mq_notify
.llong .sys_mq_getsetattr
- .llong .sys_ni_syscall /* 268 reserved for sys_kexec_load */
+ .llong .sys_kexec_load
.llong .sys_add_key
.llong .sys_request_key /* 270 */
.llong .sys_keyctl
diff --git a/arch/ppc64/kernel/mpic.c b/arch/ppc64/kernel/mpic.c
index 593ea5b82af..e8fbab1df37 100644
--- a/arch/ppc64/kernel/mpic.c
+++ b/arch/ppc64/kernel/mpic.c
@@ -792,6 +792,35 @@ void mpic_setup_this_cpu(void)
#endif /* CONFIG_SMP */
}
+/*
+ * XXX: someone who knows mpic should check this.
+ * do we need to eoi the ipi here (see xics comments)?
+ * or can we reset the mpic in the new kernel?
+ */
+void mpic_teardown_this_cpu(void)
+{
+ struct mpic *mpic = mpic_primary;
+ unsigned long flags;
+ u32 msk = 1 << hard_smp_processor_id();
+ unsigned int i;
+
+ BUG_ON(mpic == NULL);
+
+ DBG("%s: teardown_this_cpu(%d)\n", mpic->name, hard_smp_processor_id());
+ spin_lock_irqsave(&mpic_lock, flags);
+
+ /* let the mpic know we don't want intrs. */
+ for (i = 0; i < mpic->num_sources ; i++)
+ mpic_irq_write(i, MPIC_IRQ_DESTINATION,
+ mpic_irq_read(i, MPIC_IRQ_DESTINATION) & ~msk);
+
+ /* Set current processor priority to max */
+ mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0xf);
+
+ spin_unlock_irqrestore(&mpic_lock, flags);
+}
+
+
void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask)
{
struct mpic *mpic = mpic_primary;
diff --git a/arch/ppc64/kernel/mpic.h b/arch/ppc64/kernel/mpic.h
index 63e177143ea..99fbbc9a084 100644
--- a/arch/ppc64/kernel/mpic.h
+++ b/arch/ppc64/kernel/mpic.h
@@ -255,6 +255,9 @@ extern unsigned int mpic_irq_get_priority(unsigned int irq);
/* Setup a non-boot CPU */
extern void mpic_setup_this_cpu(void);
+/* Clean up for kexec (or cpu offline or ...) */
+extern void mpic_teardown_this_cpu(void);
+
/* Request IPIs on primary mpic */
extern void mpic_request_ipis(void);
diff --git a/arch/ppc64/kernel/pSeries_setup.c b/arch/ppc64/kernel/pSeries_setup.c
index f2b41243342..44d9af72d22 100644
--- a/arch/ppc64/kernel/pSeries_setup.c
+++ b/arch/ppc64/kernel/pSeries_setup.c
@@ -187,14 +187,16 @@ static void __init pSeries_setup_arch(void)
{
/* Fixup ppc_md depending on the type of interrupt controller */
if (ppc64_interrupt_controller == IC_OPEN_PIC) {
- ppc_md.init_IRQ = pSeries_init_mpic;
+ ppc_md.init_IRQ = pSeries_init_mpic;
ppc_md.get_irq = mpic_get_irq;
+ ppc_md.cpu_irq_down = mpic_teardown_this_cpu;
/* Allocate the mpic now, so that find_and_init_phbs() can
* fill the ISUs */
pSeries_setup_mpic();
} else {
ppc_md.init_IRQ = xics_init_IRQ;
ppc_md.get_irq = xics_get_irq;
+ ppc_md.cpu_irq_down = xics_teardown_cpu;
}
#ifdef CONFIG_SMP
diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c
index 0a47a5ef428..d5e4866e9ac 100644
--- a/arch/ppc64/kernel/setup.c
+++ b/arch/ppc64/kernel/setup.c
@@ -677,11 +677,16 @@ void __init setup_system(void)
DBG(" <- setup_system()\n");
}
-
-void machine_restart(char *cmd)
+/* also used by kexec */
+void machine_shutdown(void)
{
if (ppc_md.nvram_sync)
ppc_md.nvram_sync();
+}
+
+void machine_restart(char *cmd)
+{
+ machine_shutdown();
ppc_md.restart(cmd);
#ifdef CONFIG_SMP
smp_send_stop();
@@ -690,13 +695,11 @@ void machine_restart(char *cmd)
local_irq_disable();
while (1) ;
}
-
EXPORT_SYMBOL(machine_restart);
-
+
void machine_power_off(void)
{
- if (ppc_md.nvram_sync)
- ppc_md.nvram_sync();
+ machine_shutdown();
ppc_md.power_off();
#ifdef CONFIG_SMP
smp_send_stop();
@@ -705,13 +708,11 @@ void machine_power_off(void)
local_irq_disable();
while (1) ;
}
-
EXPORT_SYMBOL(machine_power_off);
-
+
void machine_halt(void)
{
- if (ppc_md.nvram_sync)
- ppc_md.nvram_sync();
+ machine_shutdown();
ppc_md.halt();
#ifdef CONFIG_SMP
smp_send_stop();
@@ -720,7 +721,6 @@ void machine_halt(void)
local_irq_disable();
while (1) ;
}
-
EXPORT_SYMBOL(machine_halt);
static int ppc64_panic_event(struct notifier_block *this,
diff --git a/arch/ppc64/kernel/xics.c b/arch/ppc64/kernel/xics.c
index 879f39b90a3..677c4450984 100644
--- a/arch/ppc64/kernel/xics.c
+++ b/arch/ppc64/kernel/xics.c
@@ -647,6 +647,31 @@ static void xics_set_affinity(unsigned int virq, cpumask_t cpumask)
}
}
+void xics_teardown_cpu(void)
+{
+ int cpu = smp_processor_id();
+ int status;
+
+ ops->cppr_info(cpu, 0x00);
+ iosync();
+
+ /*
+ * we need to EOI the IPI if we got here from kexec down IPI
+ *
+ * xics doesn't care if we duplicate an EOI as long as we
+ * don't EOI and raise priority.
+ *
+ * probably need to check all the other interrupts too
+ * should we be flagging idle loop instead?
+ * or creating some task to be scheduled?
+ */
+ ops->xirr_info_set(cpu, XICS_IPI);
+
+ status = rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
+ (1UL << interrupt_server_size) - 1 - default_distrib_server, 0);
+ WARN_ON(status != 0);
+}
+
#ifdef CONFIG_HOTPLUG_CPU
/* Interrupts are disabled. */