diff options
Diffstat (limited to 'arch')
141 files changed, 3165 insertions, 3094 deletions
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 134af97ff34..b7f23324231 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -347,6 +347,111 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} #endif +/* -------------------------------------------------------------------- + * Compact Flash (PCMCIA or IDE) + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \ + defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) + +static struct at91_cf_data cf0_data; + +static struct resource cf0_resources[] = { + [0] = { + .start = AT91_CHIPSELECT_4, + .end = AT91_CHIPSELECT_4 + SZ_256M - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, + } +}; + +static struct platform_device cf0_device = { + .id = 0, + .dev = { + .platform_data = &cf0_data, + }, + .resource = cf0_resources, + .num_resources = ARRAY_SIZE(cf0_resources), +}; + +static struct at91_cf_data cf1_data; + +static struct resource cf1_resources[] = { + [0] = { + .start = AT91_CHIPSELECT_5, + .end = AT91_CHIPSELECT_5 + SZ_256M - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, + } +}; + +static struct platform_device cf1_device = { + .id = 1, + .dev = { + .platform_data = &cf1_data, + }, + .resource = cf1_resources, + .num_resources = ARRAY_SIZE(cf1_resources), +}; + +void __init at91_add_device_cf(struct at91_cf_data *data) +{ + unsigned long ebi0_csa; + struct platform_device *pdev; + + if (!data) + return; + + /* + * assign CS4 or CS5 to SMC with Compact Flash logic support, + * we assume SMC timings are configured by board code, + * except True IDE where timings are controlled by driver + */ + ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA); + switch (data->chipselect) { + case 4: + at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */ + ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1; + cf0_data = *data; + pdev = &cf0_device; + break; + case 5: + at91_set_A_periph(AT91_PIN_PD7, 0); /* EBI0_NCS5/CFCS1 */ + ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2; + cf1_data = *data; + pdev = &cf1_device; + break; + default: + printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n", + data->chipselect); + return; + } + at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa); + + if (data->det_pin) { + at91_set_gpio_input(data->det_pin, 1); + at91_set_deglitch(data->det_pin, 1); + } + + if (data->irq_pin) { + at91_set_gpio_input(data->irq_pin, 1); + at91_set_deglitch(data->irq_pin, 1); + } + + if (data->vcc_pin) + /* initially off */ + at91_set_gpio_output(data->vcc_pin, 0); + + /* enable EBI controlled pins */ + at91_set_A_periph(AT91_PIN_PD5, 1); /* NWAIT */ + at91_set_A_periph(AT91_PIN_PD8, 0); /* CFCE1 */ + at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */ + at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */ + + pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf"; + platform_device_register(pdev); +} +#else +void __init at91_add_device_cf(struct at91_cf_data *data) {} +#endif /* -------------------------------------------------------------------- * NAND / SmartMedia diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 0b3ae21b456..793fe7b25f3 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -56,6 +56,9 @@ struct at91_cf_data { u8 vcc_pin; /* power switching */ u8 rst_pin; /* card reset */ u8 chipselect; /* EBI Chip Select number */ + u8 flags; +#define AT91_CF_TRUE_IDE 0x01 +#define AT91_IDE_SWAP_A0_A2 0x02 }; extern void __init at91_add_device_cf(struct at91_cf_data *data); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index f6a13451d1f..6031e179926 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -81,7 +81,7 @@ static inline void __init ldp_init_smc911x(void) } ldp_smc911x_resources[0].start = cs_mem_base + 0x0; - ldp_smc911x_resources[0].end = cs_mem_base + 0xf; + ldp_smc911x_resources[0].end = cs_mem_base + 0xff; udelay(100); eth_gpio = LDP_SMC911X_GPIO; diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 8f1f97d56e1..0c1f86e3e44 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -1129,6 +1129,7 @@ endchoice config PM_WAKEUP_BY_GPIO bool "Allow Wakeup from Standby by GPIO" + depends on PM && !BF54x config PM_WAKEUP_GPIO_NUMBER int "GPIO number" @@ -1168,6 +1169,12 @@ config PM_BFIN_WAKE_GP default n help Enable General-Purpose Wake-Up (Voltage Regulator Power-Up) + (all processors, except ADSP-BF549). This option sets + the general-purpose wake-up enable (GPWE) control bit to enable + wake-up upon detection of an active low signal on the /GPW (PH7) pin. + On ADSP-BF549 this option enables the the same functionality on the + /MRXON pin also PH7. + endmenu menu "CPU Frequency scaling" diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug index 5f981d9ca62..79e7e63ab70 100644 --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -21,12 +21,6 @@ config DEBUG_STACK_USAGE config HAVE_ARCH_KGDB def_bool y -config KGDB_TESTCASE - tristate "KGDB: for test case in expect" - default n - help - This is a kgdb test case for automated testing. - config DEBUG_VERBOSE bool "Verbose fault messages" default y diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index 4fdb9e04759..281f4b60e60 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Fri Jan 9 17:58:41 2009 +# Linux kernel version: 2.6.28 +# Fri Feb 20 10:01:44 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -133,10 +133,15 @@ CONFIG_BF518=y # CONFIG_BF538 is not set # CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set +# CONFIG_BF547M is not set # CONFIG_BF548 is not set +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set # CONFIG_BF561 is not set CONFIG_BF_REV_MIN=0 CONFIG_BF_REV_MAX=2 @@ -426,7 +431,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set +CONFIG_NET_DSA=y +# CONFIG_NET_DSA_TAG_DSA is not set +# CONFIG_NET_DSA_TAG_EDSA is not set +# CONFIG_NET_DSA_TAG_TRAILER is not set +CONFIG_NET_DSA_TAG_STPID=y +# CONFIG_NET_DSA_MV88E6XXX is not set +# CONFIG_NET_DSA_MV88E6060 is not set +# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set +# CONFIG_NET_DSA_MV88E6131 is not set +# CONFIG_NET_DSA_MV88E6123_61_65 is not set +CONFIG_NET_DSA_KSZ8893M=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -529,6 +544,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -561,7 +578,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -607,6 +626,7 @@ CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -764,7 +784,23 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -788,8 +824,10 @@ CONFIG_BFIN_WDT=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -861,10 +899,18 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers @@ -1062,12 +1108,20 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_KGDB_TESTCASE is not set CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y # CONFIG_DEBUG_HWERR is not set @@ -1100,6 +1154,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 833128b3972..a50050f1770 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -327,8 +327,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 334c94b51c4..0a2a00d6388 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 9d733436e30..eb027587a35 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 4fb4108d310..9e62b9f40eb 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -298,8 +298,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # @@ -568,15 +568,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=m -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_BFIN is not set -CONFIG_MTD_NAND_IDS=m -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -CONFIG_MTD_NAND_PLATFORM=m +# CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set # diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index cb32f5624a1..dd6ad6be1c8 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -306,8 +306,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index 0f8697618aa..6bc2fb1b2a7 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -361,8 +361,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_BFIN_L2_CACHEABLE is not set # CONFIG_MPU is not set @@ -680,7 +680,7 @@ CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y +# CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 042c7adfccf..69714fb3e60 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -329,8 +329,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_BFIN_L2_CACHEABLE is not set # CONFIG_MPU is not set diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig index 3a20e281d23..017c6ea071b 100644 --- a/arch/blackfin/configs/BlackStamp_defconfig +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -288,8 +288,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index 865ed85a576..d880ef78677 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -332,8 +332,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set # CONFIG_MPU is not set # diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index efe9741b1f1..f410430b4e3 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -336,8 +336,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set CONFIG_L1_MAX_PIECE=16 # CONFIG_MPU is not set @@ -595,7 +595,7 @@ CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y +# CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index eae83b5de92..7db93874c98 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -612,7 +612,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_SCSI=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y +# CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index fa580affc9d..a46529c6ade 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -282,8 +282,8 @@ CONFIG_BFIN_ICACHE=y CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_DCACHE_BANKA is not set # CONFIG_BFIN_ICACHE_LOCK is not set -# CONFIG_BFIN_WB is not set -CONFIG_BFIN_WT=y +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set CONFIG_L1_MAX_PIECE=16 # diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild index 606ecfdcc96..09c31418cc0 100644 --- a/arch/blackfin/include/asm/Kbuild +++ b/arch/blackfin/include/asm/Kbuild @@ -1,3 +1,4 @@ include include/asm-generic/Kbuild.asm +unifdef-y += bfin_sport.h unifdef-y += fixed_code.h diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h index fe88a2c1921..65a651db5b0 100644 --- a/arch/blackfin/include/asm/bfin_sport.h +++ b/arch/blackfin/include/asm/bfin_sport.h @@ -1,30 +1,9 @@ /* - * File: include/asm-blackfin/bfin_sport.h - * Based on: - * Author: Roy Huang (roy.huang@analog.com) + * bfin_sport.h - userspace header for bfin sport driver * - * Created: Thu Aug. 24 2006 - * Description: + * Copyright 2004-2008 Analog Devices Inc. * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __BFIN_SPORT_H__ @@ -42,11 +21,10 @@ #define NORM_FORMAT 0x0 #define ALAW_FORMAT 0x2 #define ULAW_FORMAT 0x3 -struct sport_register; /* Function driver which use sport must initialize the structure */ struct sport_config { - /*TDM (multichannels), I2S or other mode */ + /* TDM (multichannels), I2S or other mode */ unsigned int mode:3; /* if TDM mode is selected, channels must be set */ @@ -72,12 +50,18 @@ struct sport_config { int serial_clk; int fsync_clk; - unsigned int data_format:2; /*Normal, u-law or a-law */ + unsigned int data_format:2; /* Normal, u-law or a-law */ int word_len; /* How length of the word in bits, 3-32 bits */ int dma_enabled; }; +/* Userspace interface */ +#define SPORT_IOC_MAGIC 'P' +#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) + +#ifdef __KERNEL__ + struct sport_register { unsigned short tcr1; unsigned short reserved0; @@ -117,9 +101,6 @@ struct sport_register { unsigned long mrcs3; }; -#define SPORT_IOC_MAGIC 'P' -#define SPORT_IOC_CONFIG _IOWR('P', 0x01, struct sport_config) - struct sport_dev { struct cdev cdev; /* Char device structure */ @@ -149,6 +130,8 @@ struct sport_dev { struct sport_config config; }; +#endif + #define SPORT_TCR1 0 #define SPORT_TCR2 1 #define SPORT_TCLKDIV 2 @@ -169,4 +152,4 @@ struct sport_dev { #define SPORT_MRCS2 22 #define SPORT_MRCS3 23 -#endif /*__BFIN_SPORT_H__*/ +#endif diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h index 76f53d8b9a0..343b56361ec 100644 --- a/arch/blackfin/include/asm/ipipe.h +++ b/arch/blackfin/include/asm/ipipe.h @@ -35,9 +35,9 @@ #include <asm/atomic.h> #include <asm/traps.h> -#define IPIPE_ARCH_STRING "1.8-00" +#define IPIPE_ARCH_STRING "1.9-00" #define IPIPE_MAJOR_NUMBER 1 -#define IPIPE_MINOR_NUMBER 8 +#define IPIPE_MINOR_NUMBER 9 #define IPIPE_PATCH_NUMBER 0 #ifdef CONFIG_SMP @@ -83,9 +83,9 @@ struct ipipe_sysinfo { "%2 = CYCLES2\n" \ "CC = %2 == %0\n" \ "if ! CC jump 1b\n" \ - : "=r" (((unsigned long *)&t)[1]), \ - "=r" (((unsigned long *)&t)[0]), \ - "=r" (__cy2) \ + : "=d,a" (((unsigned long *)&t)[1]), \ + "=d,a" (((unsigned long *)&t)[0]), \ + "=d,a" (__cy2) \ : /*no input*/ : "CC"); \ t; \ }) @@ -118,35 +118,40 @@ void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, #define __ipipe_disable_irq(irq) (irq_desc[irq].chip->mask(irq)) -#define __ipipe_lock_root() \ - set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags) +static inline int __ipipe_check_tickdev(const char *devname) +{ + return 1; +} -#define __ipipe_unlock_root() \ - clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags) +static inline void __ipipe_lock_root(void) +{ + set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)); +} + +static inline void __ipipe_unlock_root(void) +{ + clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)); +} void __ipipe_enable_pipeline(void); #define __ipipe_hook_critical_ipi(ipd) do { } while (0) -#define __ipipe_sync_pipeline(syncmask) \ - do { \ - struct ipipe_domain *ipd = ipipe_current_domain; \ - if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \ - __ipipe_sync_stage(syncmask); \ - } while (0) +#define __ipipe_sync_pipeline ___ipipe_sync_pipeline +void ___ipipe_sync_pipeline(unsigned long syncmask); void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs); int __ipipe_get_irq_priority(unsigned irq); -int __ipipe_get_irqthread_priority(unsigned irq); - void __ipipe_stall_root_raw(void); void __ipipe_unstall_root_raw(void); void __ipipe_serial_debug(const char *fmt, ...); +asmlinkage void __ipipe_call_irqtail(unsigned long addr); + DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs); extern unsigned long __ipipe_core_clock; @@ -162,42 +167,25 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul) #define __ipipe_run_irqtail() /* Must be a macro */ \ do { \ - asmlinkage void __ipipe_call_irqtail(void); \ unsigned long __pending; \ - CSYNC(); \ + CSYNC(); \ __pending = bfin_read_IPEND(); \ if (__pending & 0x8000) { \ __pending &= ~0x8010; \ if (__pending && (__pending & (__pending - 1)) == 0) \ - __ipipe_call_irqtail(); \ + __ipipe_call_irqtail(__ipipe_irq_tail_hook); \ } \ } while (0) #define __ipipe_run_isr(ipd, irq) \ do { \ if (ipd == ipipe_root_domain) { \ - /* \ - * Note: the I-pipe implements a threaded interrupt model on \ - * this arch for Linux external IRQs. The interrupt handler we \ - * call here only wakes up the associated IRQ thread. \ - */ \ - if (ipipe_virtual_irq_p(irq)) { \ - /* No irqtail here; virtual interrupts have no effect \ - on IPEND so there is no need for processing \ - deferral. */ \ - local_irq_enable_nohead(ipd); \ + local_irq_enable_hw(); \ + if (ipipe_virtual_irq_p(irq)) \ ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \ - local_irq_disable_nohead(ipd); \ - } else \ - /* \ - * No need to run the irqtail here either; \ - * we can't be preempted by hw IRQs, so \ - * non-Linux IRQs cannot stack over the short \ - * thread wakeup code. Which in turn means \ - * that no irqtail condition could be pending \ - * for domains above Linux in the pipeline. \ - */ \ + else \ ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \ + local_irq_disable_hw(); \ } else { \ __clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \ local_irq_enable_nohead(ipd); \ @@ -217,42 +205,24 @@ void ipipe_init_irq_threads(void); int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc); -#define IS_SYSIRQ(irq) ((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS) -#define IS_GPIOIRQ(irq) ((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS) - +#ifdef CONFIG_GENERIC_CLOCKEVENTS +#define IRQ_SYSTMR IRQ_CORETMR +#define IRQ_PRIOTMR IRQ_CORETMR +#else #define IRQ_SYSTMR IRQ_TIMER0 #define IRQ_PRIOTMR CONFIG_IRQ_TIMER0 +#endif -#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533) -#define PRIO_GPIODEMUX(irq) CONFIG_PFA -#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537) -#define PRIO_GPIODEMUX(irq) CONFIG_IRQ_PROG_INTA -#elif defined(CONFIG_BF52x) -#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \ - (irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \ - (irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \ - -1) -#elif defined(CONFIG_BF561) -#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \ - (irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \ - (irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \ - -1) +#ifdef CONFIG_BF561 #define bfin_write_TIMER_DISABLE(val) bfin_write_TMRS8_DISABLE(val) #define bfin_write_TIMER_ENABLE(val) bfin_write_TMRS8_ENABLE(val) #define bfin_write_TIMER_STATUS(val) bfin_write_TMRS8_STATUS(val) #define bfin_read_TIMER_STATUS() bfin_read_TMRS8_STATUS() #elif defined(CONFIG_BF54x) -#define PRIO_GPIODEMUX(irq) ((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \ - (irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \ - (irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \ - (irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \ - -1) #define bfin_write_TIMER_DISABLE(val) bfin_write_TIMER_DISABLE0(val) #define bfin_write_TIMER_ENABLE(val) bfin_write_TIMER_ENABLE0(val) #define bfin_write_TIMER_STATUS(val) bfin_write_TIMER_STATUS0(val) #define bfin_read_TIMER_STATUS(val) bfin_read_TIMER_STATUS0(val) -#else -# error "no PRIO_GPIODEMUX() for this part" #endif #define __ipipe_root_tick_p(regs) ((regs->ipend & 0x10) != 0) @@ -275,4 +245,6 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc); #endif /* !CONFIG_IPIPE */ +#define ipipe_update_tick_evtdev(evtdev) do { } while (0) + #endif /* !__ASM_BLACKFIN_IPIPE_H */ diff --git a/arch/blackfin/include/asm/ipipe_base.h b/arch/blackfin/include/asm/ipipe_base.h index cb1025aeabc..3e8acbd1a3b 100644 --- a/arch/blackfin/include/asm/ipipe_base.h +++ b/arch/blackfin/include/asm/ipipe_base.h @@ -1,5 +1,5 @@ /* -*- linux-c -*- - * include/asm-blackfin/_baseipipe.h + * include/asm-blackfin/ipipe_base.h * * Copyright (C) 2007 Philippe Gerum. * @@ -27,8 +27,9 @@ #define IPIPE_NR_XIRQS NR_IRQS #define IPIPE_IRQ_ISHIFT 5 /* 2^5 for 32bits arch. */ -/* Blackfin-specific, global domain flags */ -#define IPIPE_ROOTLOCK_FLAG 1 /* Lock pipeline for root */ +/* Blackfin-specific, per-cpu pipeline status */ +#define IPIPE_SYNCDEFER_FLAG 15 +#define IPIPE_SYNCDEFER_MASK (1L << IPIPE_SYNCDEFER_MASK) /* Blackfin traps -- i.e. exception vector numbers */ #define IPIPE_NR_FAULTS 52 /* We leave a gap after VEC_ILL_RES. */ @@ -48,11 +49,6 @@ #ifndef __ASSEMBLY__ -#include <linux/bitops.h> - -extern int test_bit(int nr, const void *addr); - - extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */ static inline void __ipipe_stall_root(void) diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h index 3d977909ce7..7645e85a5f6 100644 --- a/arch/blackfin/include/asm/irq.h +++ b/arch/blackfin/include/asm/irq.h @@ -61,20 +61,38 @@ void __ipipe_restore_root(unsigned long flags); #define raw_irqs_disabled_flags(flags) (!irqs_enabled_from_flags_hw(flags)) #define local_test_iflag_hw(x) irqs_enabled_from_flags_hw(x) -#define local_save_flags(x) \ - do { \ - (x) = __ipipe_test_root() ? \ +#define local_save_flags(x) \ + do { \ + (x) = __ipipe_test_root() ? \ __all_masked_irq_flags : bfin_irq_flags; \ + barrier(); \ } while (0) -#define local_irq_save(x) \ - do { \ - (x) = __ipipe_test_and_stall_root(); \ +#define local_irq_save(x) \ + do { \ + (x) = __ipipe_test_and_stall_root() ? \ + __all_masked_irq_flags : bfin_irq_flags; \ + barrier(); \ + } while (0) + +static inline void local_irq_restore(unsigned long x) +{ + barrier(); + __ipipe_restore_root(x == __all_masked_irq_flags); +} + +#define local_irq_disable() \ + do { \ + __ipipe_stall_root(); \ + barrier(); \ } while (0) -#define local_irq_restore(x) __ipipe_restore_root(x) -#define local_irq_disable() __ipipe_stall_root() -#define local_irq_enable() __ipipe_unstall_root() +static inline void local_irq_enable(void) +{ + barrier(); + __ipipe_unstall_root(); +} + #define irqs_disabled() __ipipe_test_root() #define local_save_flags_hw(x) \ diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h index e721ce55956..2920087516f 100644 --- a/arch/blackfin/include/asm/thread_info.h +++ b/arch/blackfin/include/asm/thread_info.h @@ -122,6 +122,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_MEMDIE 4 #define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ #define TIF_FREEZE 6 /* is freezing for suspend */ +#define TIF_IRQ_SYNC 7 /* sync pipeline stage */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) @@ -130,6 +131,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) #define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) #define _TIF_FREEZE (1<<TIF_FREEZE) +#define _TIF_IRQ_SYNC (1<<TIF_IRQ_SYNC) #define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 4a92a86824b..fd4d4328a0f 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -15,13 +15,15 @@ else obj-y += time.o endif -CFLAGS_kgdb_test.o := -mlong-calls -O0 - obj-$(CONFIG_IPIPE) += ipipe.o obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o obj-$(CONFIG_CPLB_INFO) += cplbinfo.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_KGDB) += kgdb.o -obj-$(CONFIG_KGDB_TESTCASE) += kgdb_test.o +obj-$(CONFIG_KGDB_TESTS) += kgdb_test.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +# the kgdb test puts code into L2 and without linker +# relaxation, we need to force long calls to/from it +CFLAGS_kgdb_test.o := -mlong-calls -O0 diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 0e28f759573..d6c067782e6 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -53,9 +53,13 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) i_d = i_i = 0; +#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO /* Set up the zero page. */ d_tbl[i_d].addr = 0; d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; + i_tbl[i_i].addr = 0; + i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB; +#endif /* Cover kernel memory with 4M pages. */ addr = 0; diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c index 339be5a3ae6..a5de8d45424 100644 --- a/arch/blackfin/kernel/ipipe.c +++ b/arch/blackfin/kernel/ipipe.c @@ -35,14 +35,8 @@ #include <asm/atomic.h> #include <asm/io.h> -static int create_irq_threads; - DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs); -static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask); - -static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count); - asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs); static void __ipipe_no_irqtail(void); @@ -93,6 +87,7 @@ void __ipipe_enable_pipeline(void) */ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) { + struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr(); struct ipipe_domain *this_domain, *next_domain; struct list_head *head, *pos; int m_ack, s = -1; @@ -104,7 +99,6 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) * interrupt. */ m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR); - this_domain = ipipe_current_domain; if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control))) @@ -114,49 +108,28 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) next_domain = list_entry(head, struct ipipe_domain, p_link); if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) { if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) - next_domain->irqs[irq].acknowledge(irq, irq_desc + irq); - if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)) - s = __test_and_set_bit(IPIPE_STALL_FLAG, - &ipipe_root_cpudom_var(status)); + next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq)); + if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status)) + s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status); __ipipe_dispatch_wired(next_domain, irq); - goto finalize; - return; + goto out; } } /* Ack the interrupt. */ pos = head; - while (pos != &__ipipe_pipeline) { next_domain = list_entry(pos, struct ipipe_domain, p_link); - /* - * For each domain handling the incoming IRQ, mark it - * as pending in its log. - */ if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) { - /* - * Domains that handle this IRQ are polled for - * acknowledging it by decreasing priority - * order. The interrupt must be made pending - * _first_ in the domain's status flags before - * the PIC is unlocked. - */ __ipipe_set_irq_pending(next_domain, irq); - if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) { - next_domain->irqs[irq].acknowledge(irq, irq_desc + irq); + next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq)); m_ack = 1; } } - - /* - * If the domain does not want the IRQ to be passed - * down the interrupt pipe, exit the loop now. - */ if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control)) break; - pos = next_domain->p_link.next; } @@ -166,18 +139,24 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) * immediately to the current domain if the interrupt has been * marked as 'sticky'. This search does not go beyond the * current domain in the pipeline. We also enforce the - * additional root stage lock (blackfin-specific). */ + * additional root stage lock (blackfin-specific). + */ + if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status)) + s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status); - if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)) - s = __test_and_set_bit(IPIPE_STALL_FLAG, - &ipipe_root_cpudom_var(status)); -finalize: + /* + * If the interrupt preempted the head domain, then do not + * even try to walk the pipeline, unless an interrupt is + * pending for it. + */ + if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) && + ipipe_head_cpudom_var(irqpend_himask) == 0) + goto out; __ipipe_walk_pipeline(head); - +out: if (!s) - __clear_bit(IPIPE_STALL_FLAG, - &ipipe_root_cpudom_var(status)); + __clear_bit(IPIPE_STALL_FLAG, &p->status); } int __ipipe_check_root(void) @@ -187,7 +166,7 @@ int __ipipe_check_root(void) void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq) { - struct irq_desc *desc = irq_desc + irq; + struct irq_desc *desc = irq_to_desc(irq); int prio = desc->ic_prio; desc->depth = 0; @@ -199,7 +178,7 @@ EXPORT_SYMBOL(__ipipe_enable_irqdesc); void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq) { - struct irq_desc *desc = irq_desc + irq; + struct irq_desc *desc = irq_to_desc(irq); int prio = desc->ic_prio; if (ipd != &ipipe_root && @@ -236,15 +215,18 @@ int __ipipe_syscall_root(struct pt_regs *regs) { unsigned long flags; - /* We need to run the IRQ tail hook whenever we don't + /* + * We need to run the IRQ tail hook whenever we don't * propagate a syscall to higher domains, because we know that * important operations might be pending there (e.g. Xenomai - * deferred rescheduling). */ + * deferred rescheduling). + */ - if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) { + if (regs->orig_p0 < NR_syscalls) { void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook; hook(); - return 0; + if ((current->flags & PF_EVNOTIFY) == 0) + return 0; } /* @@ -312,112 +294,46 @@ int ipipe_trigger_irq(unsigned irq) { unsigned long flags; +#ifdef CONFIG_IPIPE_DEBUG if (irq >= IPIPE_NR_IRQS || (ipipe_virtual_irq_p(irq) && !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map))) return -EINVAL; +#endif local_irq_save_hw(flags); - __ipipe_handle_irq(irq, NULL); - local_irq_restore_hw(flags); return 1; } -/* Move Linux IRQ to threads. */ - -static int do_irqd(void *__desc) +asmlinkage void __ipipe_sync_root(void) { - struct irq_desc *desc = __desc; - unsigned irq = desc - irq_desc; - int thrprio = desc->thr_prio; - int thrmask = 1 << thrprio; - int cpu = smp_processor_id(); - cpumask_t cpumask; - - sigfillset(¤t->blocked); - current->flags |= PF_NOFREEZE; - cpumask = cpumask_of_cpu(cpu); - set_cpus_allowed(current, cpumask); - ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio); - - while (!kthread_should_stop()) { - local_irq_disable(); - if (!(desc->status & IRQ_SCHEDULED)) { - set_current_state(TASK_INTERRUPTIBLE); -resched: - local_irq_enable(); - schedule(); - local_irq_disable(); - } - __set_current_state(TASK_RUNNING); - /* - * If higher priority interrupt servers are ready to - * run, reschedule immediately. We need this for the - * GPIO demux IRQ handler to unmask the interrupt line - * _last_, after all GPIO IRQs have run. - */ - if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1))) - goto resched; - if (--per_cpu(pending_irq_count[thrprio], cpu) == 0) - per_cpu(pending_irqthread_mask, cpu) &= ~thrmask; - desc->status &= ~IRQ_SCHEDULED; - desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); - local_irq_enable(); - } - __set_current_state(TASK_RUNNING); - return 0; -} + unsigned long flags; -static void kick_irqd(unsigned irq, void *cookie) -{ - struct irq_desc *desc = irq_desc + irq; - int thrprio = desc->thr_prio; - int thrmask = 1 << thrprio; - int cpu = smp_processor_id(); - - if (!(desc->status & IRQ_SCHEDULED)) { - desc->status |= IRQ_SCHEDULED; - per_cpu(pending_irqthread_mask, cpu) |= thrmask; - ++per_cpu(pending_irq_count[thrprio], cpu); - wake_up_process(desc->thread); - } -} + BUG_ON(irqs_disabled()); -int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc) -{ - if (desc->thread || !create_irq_threads) - return 0; - - desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq); - if (desc->thread == NULL) { - printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq); - return -ENOMEM; - } + local_irq_save_hw(flags); - wake_up_process(desc->thread); + clear_thread_flag(TIF_IRQ_SYNC); - desc->thr_handler = ipipe_root_domain->irqs[irq].handler; - ipipe_root_domain->irqs[irq].handler = &kick_irqd; + if (ipipe_root_cpudom_var(irqpend_himask) != 0) + __ipipe_sync_pipeline(IPIPE_IRQMASK_ANY); - return 0; + local_irq_restore_hw(flags); } -void __init ipipe_init_irq_threads(void) +void ___ipipe_sync_pipeline(unsigned long syncmask) { - unsigned irq; - struct irq_desc *desc; - - create_irq_threads = 1; + struct ipipe_domain *ipd = ipipe_current_domain; - for (irq = 0; irq < NR_IRQS; irq++) { - desc = irq_desc + irq; - if (desc->action != NULL || - (desc->status & IRQ_NOREQUEST) != 0) - ipipe_start_irq_thread(irq, desc); + if (ipd == ipipe_root_domain) { + if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status))) + return; } + + __ipipe_sync_stage(syncmask); } EXPORT_SYMBOL(show_stack); diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 75724eee649..7fd12656484 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -144,11 +144,15 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) #endif generic_handle_irq(irq); -#ifndef CONFIG_IPIPE /* Useless and bugous over the I-pipe: IRQs are threaded. */ - /* If we're the only interrupt running (ignoring IRQ15 which is for - syscalls), lower our priority to IRQ14 so that softirqs run at - that level. If there's another, lower-level interrupt, irq_exit - will defer softirqs to that. */ +#ifndef CONFIG_IPIPE + /* + * If we're the only interrupt running (ignoring IRQ15 which + * is for syscalls), lower our priority to IRQ14 so that + * softirqs run at that level. If there's another, + * lower-level interrupt, irq_exit will defer softirqs to + * that. If the interrupt pipeline is enabled, we are already + * running at IRQ14 priority, so we don't need this code. + */ CSYNC(); pending = bfin_read_IPEND() & ~0x8000; other_ints = pending & (pending - 1); diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c index 3dba9c17304..dbcf3e45cb0 100644 --- a/arch/blackfin/kernel/kgdb_test.c +++ b/arch/blackfin/kernel/kgdb_test.c @@ -20,6 +20,7 @@ static char cmdline[256]; static unsigned long len; +#ifndef CONFIG_SMP static int num1 __attribute__((l1_data)); void kgdb_l1_test(void) __attribute__((l1_text)); @@ -32,6 +33,8 @@ void kgdb_l1_test(void) printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); return ; } +#endif + #if L2_LENGTH static int num2 __attribute__((l2)); @@ -59,10 +62,12 @@ int kgdb_test(char *name, int len, int count, int z) static int test_proc_output(char *buf) { kgdb_test("hello world!", 12, 0x55, 0x10); +#ifndef CONFIG_SMP kgdb_l1_test(); - #if L2_LENGTH +#endif +#if L2_LENGTH kgdb_l2_test(); - #endif +#endif return 0; } diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index 594e325b40e..d76618db50d 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -45,6 +45,7 @@ #include <asm/asm-offsets.h> #include <asm/dma.h> #include <asm/fixed_code.h> +#include <asm/cacheflush.h> #include <asm/mem_map.h> #define TEXT_OFFSET 0 @@ -240,7 +241,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } else if (addr >= FIXED_CODE_START && addr + sizeof(tmp) <= FIXED_CODE_END) { - memcpy(&tmp, (const void *)(addr), sizeof(tmp)); + copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp)); copied = sizeof(tmp); } else @@ -320,7 +321,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } else if (addr >= FIXED_CODE_START && addr + sizeof(data) <= FIXED_CODE_END) { - memcpy((void *)(addr), &data, sizeof(data)); + copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data)); copied = sizeof(data); } else diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index e5c11623080..a58687bdee6 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -889,6 +889,10 @@ void __init setup_arch(char **cmdline_p) CPU, bfin_revid()); } + /* We can't run on BF548-0.1 due to ANOMALY 05000448 */ + if (bfin_cpuid() == 0x27de && bfin_revid() == 1) + panic("You can't run on this processor due to 05000448\n"); + printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n"); printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n", @@ -1141,12 +1145,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) icache_size = 0; seq_printf(m, "cache size\t: %d KB(L1 icache) " - "%d KB(L1 dcache-%s) %d KB(L2 cache)\n", + "%d KB(L1 dcache%s) %d KB(L2 cache)\n", icache_size, dcache_size, #if defined CONFIG_BFIN_WB - "wb" + "-wb" #elif defined CONFIG_BFIN_WT - "wt" + "-wt" #endif "", 0); diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index 172b4c58846..1bbacfbd4c5 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -134,7 +134,10 @@ irqreturn_t timer_interrupt(int irq, void *dummy) write_seqlock(&xtime_lock); #if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE) -/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */ + /* + * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is + * enabled. + */ if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) { #endif do_timer(1); diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 0e175342112..41f2eacfef2 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -113,7 +113,6 @@ static struct platform_device bfin_mac_device = { .name = "bfin_mac", .dev.platform_data = &bfin_mii_bus, }; -#endif #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) static struct dsa_platform_data ksz8893m_switch_data = { @@ -132,6 +131,7 @@ static struct platform_device ksz8893m_switch_device = { .dev.platform_data = &ksz8893m_switch_data, }; #endif +#endif #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -171,6 +171,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #if defined(CONFIG_NET_DSA_KSZ8893M) \ || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) /* SPI SWITCH CHIP */ @@ -179,10 +180,11 @@ static struct bfin5xx_spi_chip spi_switch_info = { .bits_per_word = 8, }; #endif +#endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -259,6 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) #if defined(CONFIG_NET_DSA_KSZ8893M) \ || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) { @@ -271,24 +274,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif +#endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc_dummy", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif @@ -630,11 +624,10 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) &bfin_mii_bus, &bfin_mac_device, -#endif - #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) &ksz8893m_switch_device, #endif +#endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index e5b4bef0eda..c847bb10107 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -2,12 +2,12 @@ * File: include/asm-blackfin/mach-bf518/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ /* This file shoule be up to date with: - * - ???? + * - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -19,6 +19,8 @@ #define ANOMALY_05000122 (1) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ +#define ANOMALY_05000254 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ @@ -53,6 +55,12 @@ #define ANOMALY_05000443 (1) /* Incorrect L1 Instruction Bank B Memory Map Location */ #define ANOMALY_05000444 (1) +/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */ +#define ANOMALY_05000452 (1) +/* PWM_TRIPB Signal Not Available on PG10 */ +#define ANOMALY_05000453 (1) +/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */ +#define ANOMALY_05000455 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) @@ -65,15 +73,20 @@ #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) +#define ANOMALY_05000278 (0) #define ANOMALY_05000285 (0) +#define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000312 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (0) #define ANOMALY_05000363 (0) +#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h index b50a63b975a..e21c1c3e4ec 100644 --- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h @@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_BFIN_UART1_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART1_CTS_PIN, CONFIG_UART1_RTS_PIN, #endif diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 856c097b531..48e69eecdba 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -487,9 +487,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -585,23 +585,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &ad9960_spi_chip_info, }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .modalias = "mmc_spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 83606fcdde2..7fe480e4ebe 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -256,9 +256,9 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -366,23 +366,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc_dummy", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index 035e8d83505..df6808d8a6e 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf527/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -167,12 +167,16 @@ #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) +#define ANOMALY_05000278 (0) #define ANOMALY_05000285 (0) +#define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000312 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000363 (0) #define ANOMALY_05000412 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h index 75722d6008b..e8c41fd842b 100644 --- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h @@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_BFIN_UART1_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART1_CTS_PIN, CONFIG_UART1_RTS_PIN, #endif diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig index 308c98dc5ab..8d8b3e7321e 100644 --- a/arch/blackfin/mach-bf533/boards/Kconfig +++ b/arch/blackfin/mach-bf533/boards/Kconfig @@ -38,9 +38,4 @@ config BFIN532_IP0X help Core support for IP04/IP04 open hardware IP-PBX. -config GENERIC_BF533_BOARD - bool "Generic" - help - Generic or Custom board support. - endchoice diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile index 9afbe72b484..ff1e832f80d 100644 --- a/arch/blackfin/mach-bf533/boards/Makefile +++ b/arch/blackfin/mach-bf533/boards/Makefile @@ -2,7 +2,6 @@ # arch/blackfin/mach-bf533/boards/Makefile # -obj-$(CONFIG_GENERIC_BF533_BOARD) += generic_board.o obj-$(CONFIG_BFIN533_STAMP) += stamp.o obj-$(CONFIG_BFIN532_IP0X) += ip0x.o obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index 015c18f85e7..0765872a8ad 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -101,9 +101,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -129,23 +129,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index e7061c7e8c4..e8974878d8c 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -96,9 +96,9 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -138,23 +138,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c deleted file mode 100644 index 986eeec53b1..00000000000 --- a/arch/blackfin/mach-bf533/boards/generic_board.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * File: arch/blackfin/mach-bf533/generic_board.c - * Based on: arch/blackfin/mach-bf533/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> - * - * Created: 2005 - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/irq.h> - -/* - * Name the Board for the /proc/cpuinfo - */ -const char bfin_board_name[] = "UNKNOWN BOARD"; - -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) -static struct platform_device rtc_device = { - .name = "rtc-bfin", - .id = -1, -}; -#endif - -/* - * Driver needs to know address, irq and flag pin. - */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) -static struct resource smc91x_resources[] = { - { - .start = 0x20300300, - .end = 0x20300300 + 16, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PROG_INTB, - .end = IRQ_PROG_INTB, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 -static struct resource bfin_sir0_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir0_device = { - .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir0_resources), - .resource = bfin_sir0_resources, -}; -#endif -#endif - -static struct platform_device *generic_board_devices[] __initdata = { -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) - &rtc_device, -#endif - -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) - &smc91x_device, -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 - &bfin_sir0_device, -#endif -#endif -}; - -static int __init generic_board_init(void) -{ - printk(KERN_INFO "%s(): registering device resources\n", __func__); - return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices)); -} - -arch_initcall(generic_board_init); diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index e30b1b7d144..f19b63378b1 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -127,8 +127,8 @@ static struct platform_device dm9000_device2 = { #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { /* * CPOL (Clock Polarity) * 0 - Active high SCK @@ -152,14 +152,13 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = { /* Notice: for blackfin, the speed_hz is the value of register * SPI_BAUD, not the real baudrate */ static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 2, .bus_num = 1, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, }, #endif }; diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index 0d3a03429fb..1cf893e2e55 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf533/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -160,7 +160,7 @@ #define ANOMALY_05000301 (__SILICON_REVISION__ < 6) /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ #define ANOMALY_05000302 (__SILICON_REVISION__ < 5) -/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 5) /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */ #define ANOMALY_05000306 (__SILICON_REVISION__ < 5) @@ -278,9 +278,12 @@ #define ANOMALY_05000266 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) +#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h index f3d9e495230..5f517f53b0f 100644 --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART_TX, CH_UART_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig index 42a57b0acb2..77c59da87e8 100644 --- a/arch/blackfin/mach-bf537/boards/Kconfig +++ b/arch/blackfin/mach-bf537/boards/Kconfig @@ -33,9 +33,4 @@ config CAMSIG_MINOTAUR help Board supply package for CSP Minotaur -config GENERIC_BF537_BOARD - bool "Generic" - help - Generic or Custom board support. - endchoice diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile index 7168cc14afd..68b98a7af6a 100644 --- a/arch/blackfin/mach-bf537/boards/Makefile +++ b/arch/blackfin/mach-bf537/boards/Makefile @@ -2,7 +2,6 @@ # arch/blackfin/mach-bf537/boards/Makefile # -obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o obj-$(CONFIG_BFIN537_STAMP) += stamp.o obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 9cd8fb2a30d..41c75b9bfac 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 7, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .modalias = "mmc_spi", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 1, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c deleted file mode 100644 index da710fdc456..00000000000 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ /dev/null @@ -1,745 +0,0 @@ -/* - * File: arch/blackfin/mach-bf537/boards/generic_board.c - * Based on: arch/blackfin/mach-bf533/boards/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> - * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2008 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/device.h> -#include <linux/etherdevice.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include <linux/usb/isp1362.h> -#endif -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/usb/sl811.h> -#include <asm/dma.h> -#include <asm/bfin5xx_spi.h> -#include <asm/reboot.h> -#include <asm/portmux.h> -#include <linux/spi/ad7877.h> - -/* - * Name the Board for the /proc/cpuinfo - */ -const char bfin_board_name[] = "UNKNOWN BOARD"; - -/* - * Driver needs to know address, irq and flag pin. - */ - -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) -#include <linux/usb/isp1760.h> -static struct resource bfin_isp1760_resources[] = { - [0] = { - .start = 0x203C0000, - .end = 0x203C0000 + 0x000fffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct isp1760_platform_data isp1760_priv = { - .is_isp1761 = 0, - .port1_disable = 0, - .bus_width_16 = 1, - .port1_otg = 0, - .analog_oc = 0, - .dack_polarity_high = 0, - .dreq_polarity_high = 0, -}; - -static struct platform_device bfin_isp1760_device = { - .name = "isp1760-hcd", - .id = 0, - .dev = { - .platform_data = &isp1760_priv, - }, - .num_resources = ARRAY_SIZE(bfin_isp1760_resources), - .resource = bfin_isp1760_resources, -}; -#endif - -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) -static struct resource bfin_pcmcia_cf_resources[] = { - { - .start = 0x20310000, /* IO PORT */ - .end = 0x20312000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20311000, /* Attribute Memory */ - .end = 0x20311FFF, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PF4, - .end = IRQ_PF4, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, { - .start = 6, /* Card Detect PF6 */ - .end = 6, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pcmcia_cf_device = { - .name = "bfin_cf_pcmcia", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), - .resource = bfin_pcmcia_cf_resources, -}; -#endif - -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) -static struct platform_device rtc_device = { - .name = "rtc-bfin", - .id = -1, -}; -#endif - -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) -static struct resource smc91x_resources[] = { - { - .name = "smc91x-regs", - .start = 0x20300300, - .end = 0x20300300 + 16, - .flags = IORESOURCE_MEM, - }, { - - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; -#endif - -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) -static struct resource dm9000_resources[] = { - [0] = { - .start = 0x203FB800, - .end = 0x203FB800 + 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x203FB800 + 4, - .end = 0x203FB800 + 5, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_PF9, - .end = IRQ_PF9, - .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), - }, -}; - -static struct platform_device dm9000_device = { - .name = "dm9000", - .id = -1, - .num_resources = ARRAY_SIZE(dm9000_resources), - .resource = dm9000_resources, -}; -#endif - -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) -static struct resource sl811_hcd_resources[] = { - { - .start = 0x20340000, - .end = 0x20340000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20340004, - .end = 0x20340004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_SL811_BFIN_IRQ, - .end = CONFIG_USB_SL811_BFIN_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) -void sl811_port_power(struct device *dev, int is_on) -{ - gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); - -} -#endif - -static struct sl811_platform_data sl811_priv = { - .potpg = 10, - .power = 250, /* == 500mA */ -#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) - .port_power = &sl811_port_power, -#endif -}; - -static struct platform_device sl811_hcd_device = { - .name = "sl811-hcd", - .id = 0, - .dev = { - .platform_data = &sl811_priv, - }, - .num_resources = ARRAY_SIZE(sl811_hcd_resources), - .resource = sl811_hcd_resources, -}; -#endif - -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -static struct resource isp1362_hcd_resources[] = { - { - .start = 0x20360000, - .end = 0x20360000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x20360004, - .end = 0x20360004, - .flags = IORESOURCE_MEM, - }, { - .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct isp1362_platform_data isp1362_priv = { - .sel15Kres = 1, - .clknotstop = 0, - .oc_enable = 0, - .int_act_high = 0, - .int_edge_triggered = 0, - .remote_wakeup_connected = 0, - .no_power_switching = 1, - .power_switching_mode = 0, -}; - -static struct platform_device isp1362_hcd_device = { - .name = "isp1362-hcd", - .id = 0, - .dev = { - .platform_data = &isp1362_priv, - }, - .num_resources = ARRAY_SIZE(isp1362_hcd_resources), - .resource = isp1362_hcd_resources, -}; -#endif - -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -static struct platform_device bfin_mii_bus = { - .name = "bfin_mii_bus", -}; - -static struct platform_device bfin_mac_device = { - .name = "bfin_mac", - .dev.platform_data = &bfin_mii_bus, -}; -#endif - -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) -static struct resource net2272_bfin_resources[] = { - { - .start = 0x20300000, - .end = 0x20300000 + 0x100, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device net2272_bfin_device = { - .name = "net2272", - .id = -1, - .num_resources = ARRAY_SIZE(net2272_bfin_resources), - .resource = net2272_bfin_resources, -}; -#endif - -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ - -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) -static struct mtd_partition bfin_spi_flash_partitions[] = { - { - .name = "bootloader(spi)", - .size = 0x00020000, - .offset = 0, - .mask_flags = MTD_CAP_ROM - }, { - .name = "linux kernel(spi)", - .size = 0xe0000, - .offset = 0x20000 - }, { - .name = "file system(spi)", - .size = 0x700000, - .offset = 0x00100000, - } -}; - -static struct flash_platform_data bfin_spi_flash_data = { - .name = "m25p80", - .parts = bfin_spi_flash_partitions, - .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), - .type = "m25p64", -}; - -/* SPI flash chip (m25p64) */ -static struct bfin5xx_spi_chip spi_flash_chip_info = { - .enable_dma = 0, /* use dma transfer with this chip*/ - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) -/* SPI ADC chip */ -static struct bfin5xx_spi_chip spi_adc_chip_info = { - .enable_dma = 1, /* use dma transfer with this chip*/ - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) -static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) -static struct bfin5xx_spi_chip ad9960_spi_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, - .bits_per_word = 8, -}; -#endif - -#if defined(CONFIG_PBX) -static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { - .ctl_reg = 0x4, /* send zero */ - .enable_dma = 0, - .bits_per_word = 8, - .cs_change_per_word = 1, -}; -#endif - -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) -static struct bfin5xx_spi_chip spi_ad7877_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; - -static const struct ad7877_platform_data bfin_ad7877_ts_info = { - .model = 7877, - .vref_delay_usecs = 50, /* internal, no capacitor */ - .x_plate_ohms = 419, - .y_plate_ohms = 486, - .pressure_max = 1000, - .pressure_min = 0, - .stopacq_polarity = 1, - .first_conversion_delay = 3, - .acquisition_time = 1, - .averaging = 1, - .pen_down_acc_interval = 1, -}; -#endif - -static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) \ - || defined(CONFIG_MTD_M25P80_MODULE) - { - /* the modalias must be the same as spi device driver name */ - .modalias = "m25p80", /* Name of spi_driver for this device */ - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ - .platform_data = &bfin_spi_flash_data, - .controller_data = &spi_flash_chip_info, - .mode = SPI_MODE_3, - }, -#endif - -#if defined(CONFIG_SPI_ADC_BF533) \ - || defined(CONFIG_SPI_ADC_BF533_MODULE) - { - .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ - .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. */ - .platform_data = NULL, /* No spi_driver specific config */ - .controller_data = &spi_adc_chip_info, - }, -#endif - -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) - { - .modalias = "ad1836-spi", - .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, - .controller_data = &ad1836_spi_chip_info, - }, -#endif -#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) - { - .modalias = "ad9960-spi", - .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, - .controller_data = &ad9960_spi_chip_info, - }, -#endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, -#endif -#if defined(CONFIG_PBX) - { - .modalias = "fxs-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 8 - CONFIG_J11_JUMPER, - .controller_data = &spi_si3xxx_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "fxo-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 8 - CONFIG_J19_JUMPER, - .controller_data = &spi_si3xxx_chip_info, - .mode = SPI_MODE_3, - }, -#endif -#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) - { - .modalias = "ad7877", - .platform_data = &bfin_ad7877_ts_info, - .irq = IRQ_PF6, - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, - .controller_data = &spi_ad7877_chip_info, - }, -#endif -}; - -/* SPI controller data */ -static struct bfin5xx_spi_master bfin_spi0_info = { - .num_chipselect = 8, - .enable_dma = 1, /* master has the ability to do dma transfer */ - .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, -}; - -/* SPI (0) */ -static struct resource bfin_spi0_resource[] = { - [0] = { - .start = SPI0_REGBASE, - .end = SPI0_REGBASE + 0xFF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = CH_SPI, - .end = CH_SPI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_spi0_device = { - .name = "bfin-spi", - .id = 0, /* Bus number */ - .num_resources = ARRAY_SIZE(bfin_spi0_resource), - .resource = bfin_spi0_resource, - .dev = { - .platform_data = &bfin_spi0_info, /* Passed to driver */ - }, -}; -#endif /* spi master and devices */ - -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) -static struct platform_device bfin_fb_device = { - .name = "bf537-lq035", -}; -#endif - -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) -static struct platform_device bfin_fb_adv7393_device = { - .name = "bfin-adv7393", -}; -#endif - -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, { - .start = 0xFFC02000, - .end = 0xFFC020FF, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device bfin_uart_device = { - .name = "bfin-uart", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, -}; -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 -static struct resource bfin_sir0_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir0_device = { - .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir0_resources), - .resource = bfin_sir0_resources, -}; -#endif -#ifdef CONFIG_BFIN_SIR1 -static struct resource bfin_sir1_resources[] = { - { - .start = 0xFFC02000, - .end = 0xFFC020FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART1_RX, - .end = IRQ_UART1_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART1_RX, - .end = CH_UART1_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir1_device = { - .name = "bfin_sir", - .id = 1, - .num_resources = ARRAY_SIZE(bfin_sir1_resources), - .resource = bfin_sir1_resources, -}; -#endif -#endif - -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) -static struct resource bfin_twi0_resource[] = { - [0] = { - .start = TWI0_REGBASE, - .end = TWI0_REGBASE + 0xFF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TWI, - .end = IRQ_TWI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device i2c_bfin_twi_device = { - .name = "i2c-bfin-twi", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_twi0_resource), - .resource = bfin_twi0_resource, -}; -#endif - -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) -static struct platform_device bfin_sport0_uart_device = { - .name = "bfin-sport-uart", - .id = 0, -}; - -static struct platform_device bfin_sport1_uart_device = { - .name = "bfin-sport-uart", - .id = 1, -}; -#endif - -static struct platform_device *stamp_devices[] __initdata = { -#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) - &bfin_pcmcia_cf_device, -#endif - -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) - &rtc_device, -#endif - -#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) - &sl811_hcd_device, -#endif - -#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) - &isp1362_hcd_device, -#endif - -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) - &smc91x_device, -#endif - -#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) - &dm9000_device, -#endif - -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) - &bfin_mii_bus, - &bfin_mac_device, -#endif - -#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) - &net2272_bfin_device, -#endif - -#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) - &bfin_isp1760_device, -#endif - -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &bfin_spi0_device, -#endif - -#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) - &bfin_fb_device, -#endif - -#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) - &bfin_fb_adv7393_device, -#endif - -#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 - &bfin_sir0_device, -#endif -#ifdef CONFIG_BFIN_SIR1 - &bfin_sir1_device, -#endif -#endif - -#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) - &i2c_bfin_twi_device, -#endif - -#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) - &bfin_sport0_uart_device, - &bfin_sport1_uart_device, -#endif -}; - -static int __init generic_init(void) -{ - printk(KERN_INFO "%s(): registering device resources\n", __func__); - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); -#endif - - return 0; -} - -arch_initcall(generic_init); - -void native_machine_restart(char *cmd) -{ - /* workaround reboot hang when booting from SPI */ - if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); -} - -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) -void bfin_get_ether_addr(char *addr) -{ - random_ether_addr(addr); - printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); -} -EXPORT_SYMBOL(bfin_get_ether_addr); -#endif diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index db7d3a385e4..3c159819e55 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -134,9 +134,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -156,23 +156,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc_dummy", + .modalias = "mmc_spi", .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 0, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, - { - .modalias = "spi_mmc", - .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 590eb3a139b..4e1de1e53f8 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -289,9 +289,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -364,23 +364,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &ad9960_spi_chip_info, }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 7, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 3f4f203a06e..53ad10f3cd7 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) - { - .modalias = "spi_mmc_dummy", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 7, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, - .mode = SPI_MODE_3, - }, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index 9cb39121d1c..1bfd80c26c9 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf537/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -110,7 +110,7 @@ #define ANOMALY_05000301 (1) /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ #define ANOMALY_05000304 (__SILICON_REVISION__ < 3) -/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 3) /* SCKELOW Bit Does Not Maintain State Through Hibernate */ #define ANOMALY_05000307 (__SILICON_REVISION__ < 3) @@ -168,9 +168,12 @@ #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h index b3f87e1d16a..9e34700844a 100644 --- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h @@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_BFIN_UART1_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART1_CTS_PIN, CONFIG_UART1_RTS_PIN, #endif diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index e130b4f8a05..3a569982736 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf538/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -120,13 +120,17 @@ #define ANOMALY_05000198 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000263 (0) +#define ANOMALY_05000305 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000353 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h index 40503b6b89a..3c2811ebecd 100644 --- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h @@ -144,7 +144,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -158,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif -#ifdef CONFIG_BFIN_UART1_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART1_CTS_PIN, CONFIG_UART1_RTS_PIN, #endif diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 23d03c52f4b..882e40ccf0d 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -2,12 +2,12 @@ * File: include/asm-blackfin/mach-bf548/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ /* This file shoule be up to date with: - * - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List + * - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -91,8 +91,6 @@ #define ANOMALY_05000371 (__SILICON_REVISION__ < 2) /* USB DP/DM Data Pins May Lose State When Entering Hibernate */ #define ANOMALY_05000372 (__SILICON_REVISION__ < 1) -/* Mobile DDR Operation Not Functional */ -#define ANOMALY_05000377 (1) /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */ #define ANOMALY_05000378 (__SILICON_REVISION__ < 2) /* 16-Bit NAND FLASH Boot Mode Is Not Functional */ @@ -157,8 +155,22 @@ #define ANOMALY_05000429 (__SILICON_REVISION__ < 2) /* Software System Reset Corrupts PLL_LOCKCNT Register */ #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2) +/* Incorrect Use of Stack in Lockbox Firmware During Authentication */ +#define ANOMALY_05000431 (__SILICON_REVISION__ < 3) +/* OTP Write Accesses Not Supported */ +#define ANOMALY_05000442 (__SILICON_REVISION__ < 1) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) +/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */ +#define ANOMALY_05000446 (1) +/* UART IrDA Receiver Fails on Extended Bit Pulses */ +#define ANOMALY_05000447 (1) +/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */ +#define ANOMALY_05000448 (__SILICON_REVISION__ == 1) +/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */ +#define ANOMALY_05000449 (__SILICON_REVISION__ == 1) +/* USB DMA Mode 1 Short Packet Data Corruption */ +#define ANOMALY_05000450 (1 /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) @@ -171,6 +183,8 @@ #define ANOMALY_05000263 (0) #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) +#define ANOMALY_05000278 (0) +#define ANOMALY_05000305 (0) #define ANOMALY_05000307 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h index e4cf35e7ab9..c05e79cba25 100644 --- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h @@ -63,7 +63,7 @@ #define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v) #define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF) -#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) +#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS # ifndef CONFIG_UART0_CTS_PIN @@ -74,12 +74,12 @@ # define CONFIG_UART0_RTS_PIN -1 # endif -# ifndef CONFIG_UART1_CTS_PIN -# define CONFIG_UART1_CTS_PIN -1 +# ifndef CONFIG_UART2_CTS_PIN +# define CONFIG_UART2_CTS_PIN -1 # endif -# ifndef CONFIG_UART1_RTS_PIN -# define CONFIG_UART1_RTS_PIN -1 +# ifndef CONFIG_UART2_RTS_PIN +# define CONFIG_UART2_RTS_PIN -1 # endif #endif @@ -130,7 +130,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART0_TX, CH_UART0_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif @@ -144,6 +144,10 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART1_TX, CH_UART1_RX, #endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + 0, + 0, +#endif }, #endif #ifdef CONFIG_SERIAL_BFIN_UART2 @@ -154,7 +158,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART2_TX, CH_UART2_RX, #endif -#ifdef CONFIG_BFIN_UART2_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART2_CTS_PIN, CONFIG_UART2_RTS_PIN, #endif @@ -168,6 +172,10 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART3_TX, CH_UART3_RX, #endif +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + 0, + 0, +#endif }, #endif }; diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h index 60299a71e09..f194625f682 100644 --- a/arch/blackfin/mach-bf548/include/mach/irq.h +++ b/arch/blackfin/mach-bf548/include/mach/irq.h @@ -123,8 +123,8 @@ Events (highest priority) EMU 0 #define IRQ_MXVR_ERROR BFIN_IRQ(51) /* MXVR Status (Error) Interrupt */ #define IRQ_MXVR_MSG BFIN_IRQ(52) /* MXVR Message Interrupt */ #define IRQ_MXVR_PKT BFIN_IRQ(53) /* MXVR Packet Interrupt */ -#define IRQ_EPP1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */ -#define IRQ_EPP2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */ +#define IRQ_EPPI1_ERROR BFIN_IRQ(54) /* EPPI1 Error Interrupt */ +#define IRQ_EPPI2_ERROR BFIN_IRQ(55) /* EPPI2 Error Interrupt */ #define IRQ_UART3_ERROR BFIN_IRQ(56) /* UART3 Status (Error) Interrupt */ #define IRQ_HOST_ERROR BFIN_IRQ(57) /* HOST Status (Error) Interrupt */ #define IRQ_PIXC_ERROR BFIN_IRQ(59) /* PIXC Status (Error) Interrupt */ @@ -361,8 +361,8 @@ Events (highest priority) EMU 0 #define IRQ_UART2_ERR IRQ_UART2_ERROR #define IRQ_CAN0_ERR IRQ_CAN0_ERROR #define IRQ_MXVR_ERR IRQ_MXVR_ERROR -#define IRQ_EPP1_ERR IRQ_EPP1_ERROR -#define IRQ_EPP2_ERR IRQ_EPP2_ERROR +#define IRQ_EPPI1_ERR IRQ_EPPI1_ERROR +#define IRQ_EPPI2_ERR IRQ_EPPI2_ERROR #define IRQ_UART3_ERR IRQ_UART3_ERROR #define IRQ_HOST_ERR IRQ_HOST_ERROR #define IRQ_PIXC_ERR IRQ_PIXC_ERROR diff --git a/arch/blackfin/mach-bf561/boards/Kconfig b/arch/blackfin/mach-bf561/boards/Kconfig index e41a67b1fb5..e4bc6d7c5a6 100644 --- a/arch/blackfin/mach-bf561/boards/Kconfig +++ b/arch/blackfin/mach-bf561/boards/Kconfig @@ -19,9 +19,4 @@ config BFIN561_BLUETECHNIX_CM help CM-BF561 support for EVAL- and DEV-Board. -config GENERIC_BF561_BOARD - bool "Generic" - help - Generic or Custom board support. - endchoice diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile index 04add010b56..3a152559e95 100644 --- a/arch/blackfin/mach-bf561/boards/Makefile +++ b/arch/blackfin/mach-bf561/boards/Makefile @@ -2,7 +2,6 @@ # arch/blackfin/mach-bf561/boards/Makefile # -obj-$(CONFIG_GENERIC_BF561_BOARD) += generic_board.o obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o obj-$(CONFIG_BFIN561_TEPLA) += tepla.o diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 6880d1ebfe6..f623c6b0719 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -105,9 +105,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) -static struct bfin5xx_spi_chip spi_mmc_chip_info = { - .enable_dma = 1, +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) +static struct bfin5xx_spi_chip mmc_spi_chip_info = { + .enable_dma = 0, .bits_per_word = 8, }; #endif @@ -155,14 +155,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .controller_data = &ad9960_spi_chip_info, }, #endif -#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { - .modalias = "spi_mmc", + .modalias = "mmc_spi", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = CONFIG_SPI_MMC_CS_CHAN, - .platform_data = NULL, - .controller_data = &spi_mmc_chip_info, + .chip_select = 5, + .controller_data = &mmc_spi_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c deleted file mode 100644 index 0ba366a0e69..00000000000 --- a/arch/blackfin/mach-bf561/boards/generic_board.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * File: arch/blackfin/mach-bf561/generic_board.c - * Based on: arch/blackfin/mach-bf533/ezkit.c - * Author: Aidan Williams <aidan@nicta.com.au> - * - * Created: - * Description: - * - * Modified: - * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/irq.h> - -const char bfin_board_name[] = "UNKNOWN BOARD"; - -/* - * Driver needs to know address, irq and flag pin. - */ -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) -static struct resource smc91x_resources[] = { - { - .start = 0x2C010300, - .end = 0x2C010300 + 16, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PROG_INTB, - .end = IRQ_PROG_INTB, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - .start = IRQ_PF9, - .end = IRQ_PF9, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 -static struct resource bfin_sir0_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir0_device = { - .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir0_resources), - .resource = bfin_sir0_resources, -}; -#endif -#endif - -static struct platform_device *generic_board_devices[] __initdata = { -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) - &smc91x_device, -#endif - -#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -#ifdef CONFIG_BFIN_SIR0 - &bfin_sir0_device, -#endif -#endif -}; - -static int __init generic_board_init(void) -{ - printk(KERN_INFO "%s(): registering device resources\n", __func__); - return platform_add_devices(generic_board_devices, - ARRAY_SIZE(generic_board_devices)); -} - -arch_initcall(generic_board_init); diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index 1a9e1756282..d0b0b350644 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf561/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2008 Analog Devices Inc. + * Copyright (C) 2004-2009 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -224,7 +224,7 @@ #define ANOMALY_05000301 (1) /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ #define ANOMALY_05000302 (1) -/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */ #define ANOMALY_05000305 (__SILICON_REVISION__ < 5) /* SCKELOW Bit Does Not Maintain State Through Hibernate */ #define ANOMALY_05000307 (__SILICON_REVISION__ < 5) @@ -283,8 +283,11 @@ #define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) #define ANOMALY_05000353 (1) +#define ANOMALY_05000380 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000447 (0) +#define ANOMALY_05000448 (0) #endif diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h index 043bfcf26c5..ca8c5f64520 100644 --- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h @@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = { CH_UART_TX, CH_UART_RX, #endif -#ifdef CONFIG_BFIN_UART0_CTSRTS +#ifdef CONFIG_SERIAL_BFIN_CTSRTS CONFIG_UART0_CTS_PIN, CONFIG_UART0_RTS_PIN, #endif diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index 98133b968f7..80d39b2f9db 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -62,3 +62,12 @@ #if (CONFIG_BOOT_LOAD & 0x3) # error "The kernel load address must be 4 byte aligned" #endif + +/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */ +#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000 +# error "The kernel load address is too high; keep it below 10meg for safety" +#endif + +#if ANOMALY_05000448 +# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes. +#endif diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index 3c98dacbf28..aa0648c6a9f 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -66,11 +66,33 @@ /* Invalidate all instruction cache lines assocoiated with this memory area */ ENTRY(_blackfin_icache_flush_range) +/* + * Walkaround to avoid loading wrong instruction after invalidating icache + * and following sequence is met. + * + * 1) One instruction address is cached in the instruction cache. + * 2) This instruction in SDRAM is changed. + * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range(). + * 4) This instruction is executed again, but the old one is loaded. + */ + P0 = R0; + IFLUSH[P0]; do_flush IFLUSH, , nop ENDPROC(_blackfin_icache_flush_range) /* Flush all cache lines assocoiated with this area of memory. */ ENTRY(_blackfin_icache_dcache_flush_range) +/* + * Walkaround to avoid loading wrong instruction after invalidating icache + * and following sequence is met. + * + * 1) One instruction address is cached in the instruction cache. + * 2) This instruction in SDRAM is changed. + * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range(). + * 4) This instruction is executed again, but the old one is loaded. + */ + P0 = R0; + IFLUSH[P0]; do_flush FLUSH, IFLUSH ENDPROC(_blackfin_icache_dcache_flush_range) diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c index 9dddb6f8cc8..35393651359 100644 --- a/arch/blackfin/mach-common/clocks-init.c +++ b/arch/blackfin/mach-common/clocks-init.c @@ -17,7 +17,7 @@ #define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */ #define PLL_CTL_VAL \ (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \ - (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0)) + (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000)) __attribute__((l1_text)) static void do_sync(void) diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S index 4da50bcd930..8009a512fb1 100644 --- a/arch/blackfin/mach-common/dpmc_modes.S +++ b/arch/blackfin/mach-common/dpmc_modes.S @@ -376,10 +376,22 @@ ENTRY(_do_hibernate) #endif #ifdef PINT0_ASSIGN + PM_SYS_PUSH(PINT0_MASK_SET) + PM_SYS_PUSH(PINT1_MASK_SET) + PM_SYS_PUSH(PINT2_MASK_SET) + PM_SYS_PUSH(PINT3_MASK_SET) PM_SYS_PUSH(PINT0_ASSIGN) PM_SYS_PUSH(PINT1_ASSIGN) PM_SYS_PUSH(PINT2_ASSIGN) PM_SYS_PUSH(PINT3_ASSIGN) + PM_SYS_PUSH(PINT0_INVERT_SET) + PM_SYS_PUSH(PINT1_INVERT_SET) + PM_SYS_PUSH(PINT2_INVERT_SET) + PM_SYS_PUSH(PINT3_INVERT_SET) + PM_SYS_PUSH(PINT0_EDGE_SET) + PM_SYS_PUSH(PINT1_EDGE_SET) + PM_SYS_PUSH(PINT2_EDGE_SET) + PM_SYS_PUSH(PINT3_EDGE_SET) #endif PM_SYS_PUSH(EBIU_AMBCTL0) @@ -714,10 +726,22 @@ ENTRY(_do_hibernate) PM_SYS_POP(EBIU_AMBCTL0) #ifdef PINT0_ASSIGN + PM_SYS_POP(PINT3_EDGE_SET) + PM_SYS_POP(PINT2_EDGE_SET) + PM_SYS_POP(PINT1_EDGE_SET) + PM_SYS_POP(PINT0_EDGE_SET) + PM_SYS_POP(PINT3_INVERT_SET) + PM_SYS_POP(PINT2_INVERT_SET) + PM_SYS_POP(PINT1_INVERT_SET) + PM_SYS_POP(PINT0_INVERT_SET) PM_SYS_POP(PINT3_ASSIGN) PM_SYS_POP(PINT2_ASSIGN) PM_SYS_POP(PINT1_ASSIGN) PM_SYS_POP(PINT0_ASSIGN) + PM_SYS_POP(PINT3_MASK_SET) + PM_SYS_POP(PINT2_MASK_SET) + PM_SYS_POP(PINT1_MASK_SET) + PM_SYS_POP(PINT0_MASK_SET) #endif #ifdef SICA_IWR1 diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 88de053bbe8..21e65a339a2 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -600,6 +600,19 @@ ENTRY(_system_call) p2 = [p2]; [p2+(TASK_THREAD+THREAD_KSP)] = sp; +#ifdef CONFIG_IPIPE + r0 = sp; + SP += -12; + call ___ipipe_syscall_root; + SP += 12; + cc = r0 == 1; + if cc jump .Lsyscall_really_exit; + cc = r0 == -1; + if cc jump .Lresume_userspace; + r3 = [sp + PT_R3]; + r4 = [sp + PT_R4]; + p0 = [sp + PT_ORIG_P0]; +#endif /* CONFIG_IPIPE */ /* Check the System Call */ r7 = __NR_syscall; @@ -654,6 +667,17 @@ ENTRY(_system_call) r7 = r7 & r4; .Lsyscall_resched: +#ifdef CONFIG_IPIPE + cc = BITTST(r7, TIF_IRQ_SYNC); + if !cc jump .Lsyscall_no_irqsync; + [--sp] = reti; + r0 = [sp++]; + SP += -12; + call ___ipipe_sync_root; + SP += 12; + jump .Lresume_userspace_1; +.Lsyscall_no_irqsync: +#endif cc = BITTST(r7, TIF_NEED_RESCHED); if !cc jump .Lsyscall_sigpending; @@ -685,6 +709,10 @@ ENTRY(_system_call) .Lsyscall_really_exit: r5 = [sp + PT_RESERVED]; rets = r5; +#ifdef CONFIG_IPIPE + [--sp] = reti; + r5 = [sp++]; +#endif /* CONFIG_IPIPE */ rts; ENDPROC(_system_call) @@ -771,6 +799,15 @@ _new_old_task: ENDPROC(_resume) ENTRY(_ret_from_exception) +#ifdef CONFIG_IPIPE + [--sp] = rets; + SP += -12; + call ___ipipe_check_root + SP += 12 + rets = [sp++]; + cc = r0 == 0; + if cc jump 4f; /* not on behalf of Linux, get out */ +#endif /* CONFIG_IPIPE */ p2.l = lo(IPEND); p2.h = hi(IPEND); @@ -827,6 +864,28 @@ ENTRY(_ret_from_exception) rts; ENDPROC(_ret_from_exception) +#ifdef CONFIG_IPIPE + +_sync_root_irqs: + [--sp] = reti; /* Reenable interrupts */ + r0 = [sp++]; + jump.l ___ipipe_sync_root + +_resume_kernel_from_int: + r0.l = _sync_root_irqs + r0.h = _sync_root_irqs + [--sp] = rets; + [--sp] = ( r7:4, p5:3 ); + SP += -12; + call ___ipipe_call_irqtail + SP += 12; + ( r7:4, p5:3 ) = [sp++]; + rets = [sp++]; + rts +#else +#define _resume_kernel_from_int 2f +#endif + ENTRY(_return_from_int) /* If someone else already raised IRQ 15, do nothing. */ csync; @@ -848,7 +907,7 @@ ENTRY(_return_from_int) r1 = r0 - r1; r2 = r0 & r1; cc = r2 == 0; - if !cc jump 2f; + if !cc jump _resume_kernel_from_int; /* Lower the interrupt level to 15. */ p0.l = lo(EVT15); diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 43c4eb9acb6..0069c2dd462 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -235,6 +235,7 @@ ENDPROC(_evt_system_call) #ifdef CONFIG_IPIPE ENTRY(___ipipe_call_irqtail) + p0 = r0; r0.l = 1f; r0.h = 1f; reti = r0; @@ -242,9 +243,6 @@ ENTRY(___ipipe_call_irqtail) 1: [--sp] = rets; [--sp] = ( r7:4, p5:3 ); - p0.l = ___ipipe_irq_tail_hook; - p0.h = ___ipipe_irq_tail_hook; - p0 = [p0]; sp += -12; call (p0); sp += 12; @@ -259,7 +257,7 @@ ENTRY(___ipipe_call_irqtail) p0.h = hi(EVT14); [p0] = r0; csync; - r0 = 0x401f; + r0 = 0x401f (z); sti r0; raise 14; [--sp] = reti; /* IRQs on. */ @@ -277,11 +275,7 @@ ENTRY(___ipipe_call_irqtail) p0.h = _bfin_irq_flags; r0 = [p0]; sti r0; -#if 0 /* FIXME: this actually raises scheduling latencies */ - /* Reenable interrupts */ - [--sp] = reti; - r0 = [sp++]; -#endif rts; ENDPROC(___ipipe_call_irqtail) + #endif /* CONFIG_IPIPE */ diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 202494568c6..a7d7b2dd405 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -161,11 +161,15 @@ static void bfin_core_unmask_irq(unsigned int irq) static void bfin_internal_mask_irq(unsigned int irq) { + unsigned long flags; + #ifdef CONFIG_BF53x + local_irq_save_hw(flags); bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & ~(1 << SIC_SYSIRQ(irq))); #else unsigned mask_bank, mask_bit; + local_irq_save_hw(flags); mask_bank = SIC_SYSIRQ(irq) / 32; mask_bit = SIC_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) & @@ -175,15 +179,20 @@ static void bfin_internal_mask_irq(unsigned int irq) ~(1 << mask_bit)); #endif #endif + local_irq_restore_hw(flags); } static void bfin_internal_unmask_irq(unsigned int irq) { + unsigned long flags; + #ifdef CONFIG_BF53x + local_irq_save_hw(flags); bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | (1 << SIC_SYSIRQ(irq))); #else unsigned mask_bank, mask_bit; + local_irq_save_hw(flags); mask_bank = SIC_SYSIRQ(irq) / 32; mask_bit = SIC_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) | @@ -193,6 +202,7 @@ static void bfin_internal_unmask_irq(unsigned int irq) (1 << mask_bit)); #endif #endif + local_irq_restore_hw(flags); } #ifdef CONFIG_PM @@ -390,7 +400,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle) { #ifdef CONFIG_IPIPE - _set_irq_handler(irq, handle_edge_irq); + _set_irq_handler(irq, handle_level_irq); #else struct irq_desc *desc = irq_desc + irq; /* May not call generic set_irq_handler() due to spinlock @@ -1055,13 +1065,18 @@ int __init init_arch_irq(void) #endif default: #ifdef CONFIG_IPIPE - /* - * We want internal interrupt sources to be masked, because - * ISRs may trigger interrupts recursively (e.g. DMA), but - * interrupts are _not_ masked at CPU level. So let's handle - * them as level interrupts. - */ - set_irq_handler(irq, handle_level_irq); + /* + * We want internal interrupt sources to be + * masked, because ISRs may trigger interrupts + * recursively (e.g. DMA), but interrupts are + * _not_ masked at CPU level. So let's handle + * most of them as level interrupts, except + * the timer interrupt which is special. + */ + if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR) + set_irq_handler(irq, handle_simple_irq); + else + set_irq_handler(irq, handle_level_irq); #else /* !CONFIG_IPIPE */ set_irq_handler(irq, handle_simple_irq); #endif /* !CONFIG_IPIPE */ @@ -1123,9 +1138,8 @@ int __init init_arch_irq(void) #ifdef CONFIG_IPIPE for (irq = 0; irq < NR_IRQS; irq++) { - struct irq_desc *desc = irq_desc + irq; + struct irq_desc *desc = irq_to_desc(irq); desc->ic_prio = __ipipe_get_irq_priority(irq); - desc->thr_prio = __ipipe_get_irqthread_priority(irq); } #endif /* CONFIG_IPIPE */ @@ -1208,76 +1222,21 @@ int __ipipe_get_irq_priority(unsigned irq) return IVG15; } -int __ipipe_get_irqthread_priority(unsigned irq) -{ - int ient, prio; - int demux_irq; - - /* The returned priority value is rescaled to [0..IVG13+1] - * with 0 being the lowest effective priority level. */ - - if (irq <= IRQ_CORETMR) - return IVG13 - irq + 1; - - /* GPIO IRQs are given the priority of the demux - * interrupt. */ - if (IS_GPIOIRQ(irq)) { -#if defined(CONFIG_BF54x) - u32 bank = PINT_2_BANK(irq2pint_lut[irq - SYS_IRQS]); - demux_irq = (bank == 0 ? IRQ_PINT0 : - bank == 1 ? IRQ_PINT1 : - bank == 2 ? IRQ_PINT2 : - IRQ_PINT3); -#elif defined(CONFIG_BF561) - demux_irq = (irq >= IRQ_PF32 ? IRQ_PROG2_INTA : - irq >= IRQ_PF16 ? IRQ_PROG1_INTA : - IRQ_PROG0_INTA); -#elif defined(CONFIG_BF52x) - demux_irq = (irq >= IRQ_PH0 ? IRQ_PORTH_INTA : - irq >= IRQ_PG0 ? IRQ_PORTG_INTA : - IRQ_PORTF_INTA); -#else - demux_irq = irq; -#endif - return IVG13 - PRIO_GPIODEMUX(demux_irq) + 1; - } - - /* The GPIO demux interrupt is given a lower priority - * than the GPIO IRQs, so that its threaded handler - * unmasks the interrupt line after the decoded IRQs - * have been processed. */ - prio = PRIO_GPIODEMUX(irq); - /* demux irq? */ - if (prio != -1) - return IVG13 - prio; - - for (ient = 0; ient < NR_PERI_INTS; ient++) { - struct ivgx *ivg = ivg_table + ient; - if (ivg->irqno == irq) { - for (prio = 0; prio <= IVG13-IVG7; prio++) { - if (ivg7_13[prio].ifirst <= ivg && - ivg7_13[prio].istop > ivg) - return IVG7 - prio; - } - } - } - - return 0; -} - /* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */ #ifdef CONFIG_DO_IRQ_L1 __attribute__((l1_text)) #endif asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) { + struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr(); + struct ipipe_domain *this_domain = ipipe_current_domain; struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop; struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst; - int irq; + int irq, s; if (likely(vec == EVT_IVTMR_P)) { irq = IRQ_CORETMR; - goto handle_irq; + goto core_tick; } SSYNC(); @@ -1319,24 +1278,39 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) irq = ivg->irqno; if (irq == IRQ_SYSTMR) { +#ifdef CONFIG_GENERIC_CLOCKEVENTS +core_tick: +#else bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */ +#endif /* This is basically what we need from the register frame. */ __raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend; __raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc; - if (!ipipe_root_domain_p) - __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10; - else + if (this_domain != ipipe_root_domain) __raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10; + else + __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10; } -handle_irq: +#ifndef CONFIG_GENERIC_CLOCKEVENTS +core_tick: +#endif + if (this_domain == ipipe_root_domain) { + s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status); + barrier(); + } ipipe_trace_irq_entry(irq); __ipipe_handle_irq(irq, regs); - ipipe_trace_irq_exit(irq); + ipipe_trace_irq_exit(irq); - if (ipipe_root_domain_p) - return !test_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status)); + if (this_domain == ipipe_root_domain) { + set_thread_flag(TIF_IRQ_SYNC); + if (!s) { + __clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status); + return !test_bit(IPIPE_STALL_FLAG, &p->status); + } + } return 0; } diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 77c99284709..93eab614607 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -158,10 +158,14 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance) kfree(msg); break; case BFIN_IPI_CALL_FUNC: + spin_unlock(&msg_queue->lock); ipi_call_function(cpu, msg); + spin_lock(&msg_queue->lock); break; case BFIN_IPI_CPU_STOP: + spin_unlock(&msg_queue->lock); ipi_cpu_stop(cpu); + spin_lock(&msg_queue->lock); kfree(msg); break; default: @@ -457,7 +461,7 @@ void smp_icache_flush_range_others(unsigned long start, unsigned long end) smp_flush_data.start = start; smp_flush_data.end = end; - if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1)) + if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0)) printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n"); } EXPORT_SYMBOL_GPL(smp_icache_flush_range_others); diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index d0532b72bba..9c3629b9a68 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -104,7 +104,7 @@ void __init paging_init(void) } } -asmlinkage void init_pda(void) +asmlinkage void __init init_pda(void) { unsigned int cpu = raw_smp_processor_id(); diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c index e626e50a938..060df4aa991 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c @@ -135,11 +135,10 @@ pcibr_dmatrans_direct64(struct pcidev_info * info, u64 paddr, if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS) pci_addr = IS_PIC_SOFT(pcibus_info) ? PHYS_TO_DMA(paddr) : - PHYS_TO_TIODMA(paddr) | dma_attributes; + PHYS_TO_TIODMA(paddr); else - pci_addr = IS_PIC_SOFT(pcibus_info) ? - paddr : - paddr | dma_attributes; + pci_addr = paddr; + pci_addr |= dma_attributes; /* Handle Bus mode */ if (IS_PCIX(pcibus_info)) diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c index d01a5d2b755..db902540bf2 100644 --- a/arch/m68knommu/platform/5206e/config.c +++ b/arch/m68knommu/platform/5206e/config.c @@ -17,6 +17,7 @@ #include <asm/coldfire.h> #include <asm/mcfsim.h> #include <asm/mcfdma.h> +#include <asm/mcfuart.h> /***************************************************************************/ diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c index dfdb5c2ed8e..44baeb225dc 100644 --- a/arch/m68knommu/platform/528x/config.c +++ b/arch/m68knommu/platform/528x/config.c @@ -24,7 +24,6 @@ #include <asm/coldfire.h> #include <asm/mcfsim.h> #include <asm/mcfuart.h> -#include <asm/mcfqspi.h> #ifdef CONFIG_MTD_PARTITIONS #include <linux/mtd/partitions.h> @@ -33,233 +32,6 @@ /***************************************************************************/ void coldfire_reset(void); -static void coldfire_qspi_cs_control(u8 cs, u8 command); - -/***************************************************************************/ - -#if defined(CONFIG_SPI) - -#if defined(CONFIG_WILDFIRE) -#define SPI_NUM_CHIPSELECTS 0x02 -#define SPI_PAR_VAL 0x07 /* Enable DIN, DOUT, CLK */ -#define SPI_CS_MASK 0x18 - -#define FLASH_BLOCKSIZE (1024*64) -#define FLASH_NUMBLOCKS 16 -#define FLASH_TYPE "m25p80" - -#define M25P80_CS 0 -#define MMC_CS 1 - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition stm25p_partitions[] = { - /* sflash */ - [0] = { - .name = "stm25p80", - .offset = 0x00000000, - .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS, - .mask_flags = 0 - } -}; - -#endif - -#elif defined(CONFIG_WILDFIREMOD) - -#define SPI_NUM_CHIPSELECTS 0x08 -#define SPI_PAR_VAL 0x07 /* Enable DIN, DOUT, CLK */ -#define SPI_CS_MASK 0x78 - -#define FLASH_BLOCKSIZE (1024*64) -#define FLASH_NUMBLOCKS 64 -#define FLASH_TYPE "m25p32" -/* Reserve 1M for the kernel parition */ -#define FLASH_KERNEL_SIZE (1024 * 1024) - -#define M25P80_CS 5 -#define MMC_CS 6 - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition stm25p_partitions[] = { - /* sflash */ - [0] = { - .name = "kernel", - .offset = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE, - .size = FLASH_KERNEL_SIZE, - .mask_flags = 0 - }, - [1] = { - .name = "image", - .offset = 0x00000000, - .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE, - .mask_flags = 0 - }, - [2] = { - .name = "all", - .offset = 0x00000000, - .size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS, - .mask_flags = 0 - } -}; -#endif - -#else -#define SPI_NUM_CHIPSELECTS 0x04 -#define SPI_PAR_VAL 0x7F /* Enable DIN, DOUT, CLK, CS0 - CS4 */ -#endif - -#ifdef MMC_CS -static struct coldfire_spi_chip flash_chip_info = { - .mode = SPI_MODE_0, - .bits_per_word = 16, - .del_cs_to_clk = 17, - .del_after_trans = 1, - .void_write_data = 0 -}; - -static struct coldfire_spi_chip mmc_chip_info = { - .mode = SPI_MODE_0, - .bits_per_word = 16, - .del_cs_to_clk = 17, - .del_after_trans = 1, - .void_write_data = 0xFFFF -}; -#endif - -#ifdef M25P80_CS -static struct flash_platform_data stm25p80_platform_data = { - .name = "ST M25P80 SPI Flash chip", -#ifdef CONFIG_MTD_PARTITIONS - .parts = stm25p_partitions, - .nr_parts = sizeof(stm25p_partitions) / sizeof(*stm25p_partitions), -#endif - .type = FLASH_TYPE -}; -#endif - -static struct spi_board_info spi_board_info[] __initdata = { -#ifdef M25P80_CS - { - .modalias = "m25p80", - .max_speed_hz = 16000000, - .bus_num = 1, - .chip_select = M25P80_CS, - .platform_data = &stm25p80_platform_data, - .controller_data = &flash_chip_info - }, -#endif -#ifdef MMC_CS - { - .modalias = "mmc_spi", - .max_speed_hz = 16000000, - .bus_num = 1, - .chip_select = MMC_CS, - .controller_data = &mmc_chip_info - } -#endif -}; - -static struct coldfire_spi_master coldfire_master_info = { - .bus_num = 1, - .num_chipselect = SPI_NUM_CHIPSELECTS, - .irq_source = MCF5282_QSPI_IRQ_SOURCE, - .irq_vector = MCF5282_QSPI_IRQ_VECTOR, - .irq_mask = ((0x01 << MCF5282_QSPI_IRQ_SOURCE) | 0x01), - .irq_lp = 0x2B, /* Level 5 and Priority 3 */ - .par_val = SPI_PAR_VAL, - .cs_control = coldfire_qspi_cs_control, -}; - -static struct resource coldfire_spi_resources[] = { - [0] = { - .name = "qspi-par", - .start = MCF5282_QSPI_PAR, - .end = MCF5282_QSPI_PAR, - .flags = IORESOURCE_MEM - }, - - [1] = { - .name = "qspi-module", - .start = MCF5282_QSPI_QMR, - .end = MCF5282_QSPI_QMR + 0x18, - .flags = IORESOURCE_MEM - }, - - [2] = { - .name = "qspi-int-level", - .start = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE, - .end = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE, - .flags = IORESOURCE_MEM - }, - - [3] = { - .name = "qspi-int-mask", - .start = MCF5282_INTC0 + MCFINTC_IMRL, - .end = MCF5282_INTC0 + MCFINTC_IMRL, - .flags = IORESOURCE_MEM - } -}; - -static struct platform_device coldfire_spi = { - .name = "spi_coldfire", - .id = -1, - .resource = coldfire_spi_resources, - .num_resources = ARRAY_SIZE(coldfire_spi_resources), - .dev = { - .platform_data = &coldfire_master_info, - } -}; - -static void coldfire_qspi_cs_control(u8 cs, u8 command) -{ - u8 cs_bit = ((0x01 << cs) << 3) & SPI_CS_MASK; - -#if defined(CONFIG_WILDFIRE) - u8 cs_mask = ~(((0x01 << cs) << 3) & SPI_CS_MASK); -#endif -#if defined(CONFIG_WILDFIREMOD) - u8 cs_mask = (cs << 3) & SPI_CS_MASK; -#endif - - /* - * Don't do anything if the chip select is not - * one of the port qs pins. - */ - if (command & QSPI_CS_INIT) { -#if defined(CONFIG_WILDFIRE) - MCF5282_GPIO_DDRQS |= cs_bit; - MCF5282_GPIO_PQSPAR &= ~cs_bit; -#endif - -#if defined(CONFIG_WILDFIREMOD) - MCF5282_GPIO_DDRQS |= SPI_CS_MASK; - MCF5282_GPIO_PQSPAR &= ~SPI_CS_MASK; -#endif - } - - if (command & QSPI_CS_ASSERT) { - MCF5282_GPIO_PORTQS &= ~SPI_CS_MASK; - MCF5282_GPIO_PORTQS |= cs_mask; - } else if (command & QSPI_CS_DROP) { - MCF5282_GPIO_PORTQS |= SPI_CS_MASK; - } -} - -static int __init spi_dev_init(void) -{ - int retval; - - retval = platform_device_register(&coldfire_spi); - if (retval < 0) - return retval; - - if (ARRAY_SIZE(spi_board_info)) - retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); - - return retval; -} - -#endif /* CONFIG_SPI */ /***************************************************************************/ diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e61465a18c7..206cb7953b0 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -238,8 +238,12 @@ config MIPS_SIM This option enables support for MIPS Technologies MIPSsim software emulator. -config MACH_EMMA - bool "NEC EMMA series based machines" +config NEC_MARKEINS + bool "NEC EMMA2RH Mark-eins board" + select SOC_EMMA2RH + select HW_HAS_PCI + help + This enables support for the NEC Electronics Mark-eins boards. config MACH_VR41XX bool "NEC VR4100 series based machines" @@ -637,7 +641,6 @@ endchoice source "arch/mips/alchemy/Kconfig" source "arch/mips/basler/excite/Kconfig" -source "arch/mips/emma/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" @@ -895,6 +898,18 @@ config MIPS_RM9122 bool select SERIAL_RM9000 +config SOC_EMMA2RH + bool + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select SWAP_IO_SPACE + select SYS_HAS_CPU_R5500 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + config SOC_PNX833X bool select CEVT_R4K @@ -930,11 +945,6 @@ config SOC_PNX8550 config SWAP_IO_SPACE bool -config EMMA2RH - bool - depends on MARKEINS - default y - config SERIAL_RM9000 bool diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 21b00e95dae..22dab2e1434 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -416,7 +416,7 @@ load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000 # # Common NEC EMMAXXX # -core-$(CONFIG_SOC_EMMA) += arch/mips/emma/common/ +core-$(CONFIG_SOC_EMMA2RH) += arch/mips/emma/common/ cflags-$(CONFIG_SOC_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh # diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index f2baea3039b..0208723adf2 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -512,7 +512,7 @@ CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m +CONFIG_MD_RAID456=y CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 9d5bd2a0af3..5380f1f582d 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc9 -# Fri Jul 11 23:01:36 2008 +# Linux kernel version: 2.6.29-rc7 +# Wed Mar 4 23:07:16 2009 # CONFIG_MIPS=y @@ -18,8 +18,10 @@ CONFIG_MIPS=y # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MARKEINS is not set +# CONFIG_MACH_EMMA is not set # CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set @@ -39,7 +41,11 @@ CONFIG_MIPS=y # CONFIG_SNI_RM is not set CONFIG_MACH_TX39XX=y # CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +CONFIG_MACH_TXX9=y CONFIG_TOSHIBA_JMR3927=y CONFIG_SOC_TX3927=y # CONFIG_TOSHIBA_FPCIB0 is not set @@ -54,12 +60,14 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_CEVT_TXX9=y CONFIG_GPIO_TXX9=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y # CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_GPIO=y @@ -87,6 +95,7 @@ CONFIG_CPU_TX39XX=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -94,6 +103,7 @@ CONFIG_CPU_TX39XX=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set CONFIG_SYS_HAS_CPU_TX39XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y @@ -117,14 +127,12 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -# CONFIG_TICK_ONESHOT is not set +CONFIG_UNEVICTABLE_LRU=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -159,6 +167,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set @@ -171,7 +188,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -188,26 +204,23 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -221,7 +234,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -231,12 +244,15 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_PCI_STUB is not set CONFIG_MMU=y # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y @@ -245,15 +261,12 @@ CONFIG_TRAD_SIGNALS=y # CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -293,6 +306,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -302,14 +316,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # @@ -323,7 +332,89 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set @@ -336,6 +427,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -361,7 +453,6 @@ CONFIG_HAVE_IDE=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -383,6 +474,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -392,6 +486,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set @@ -399,6 +494,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -406,7 +504,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_TC35815=y -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -415,9 +512,11 @@ CONFIG_TC35815=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -428,6 +527,10 @@ CONFIG_TC35815=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set @@ -440,27 +543,7 @@ CONFIG_TC35815=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -517,10 +600,11 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y # -# GPIO Support +# Memory mapped GPIO expanders: # # @@ -528,6 +612,11 @@ CONFIG_HAVE_GPIO_LIB=y # # +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# # SPI GPIO expanders: # # CONFIG_W1 is not set @@ -542,6 +631,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set CONFIG_TXX9_WDT=y # @@ -549,18 +639,21 @@ CONFIG_TXX9_WDT=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -591,16 +684,26 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_GPIO=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y @@ -626,27 +729,34 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set CONFIG_RTC_DRV_DS1742=y # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -676,28 +786,17 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_HFSPLUS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set +# CONFIG_MISC_FILESYSTEMS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y @@ -726,7 +825,16 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y CONFIG_CMDLINE="" # @@ -734,15 +842,18 @@ CONFIG_CMDLINE="" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/markeins_defconfig index fea9bc9865a..bad8901f8f3 100644 --- a/arch/mips/configs/emma2rh_defconfig +++ b/arch/mips/configs/markeins_defconfig @@ -35,7 +35,7 @@ CONFIG_ZONE_DMA=y # CONFIG_PNX8550_STB810 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set -CONFIG_MARKEINS=y +CONFIG_NEC_MARKEINS=y # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set @@ -68,7 +68,7 @@ CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_SWAP_IO_SPACE=y -CONFIG_EMMA2RH=y +CONFIG_SOC_EMMA2RH=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # @@ -574,9 +574,9 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x1e000000 -CONFIG_MTD_PHYSMAP_LEN=0x02000000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_PLATRAM is not set # diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index 83d5c58662c..1efe977497d 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc9 -# Fri Jul 11 23:03:21 2008 +# Linux kernel version: 2.6.29-rc7 +# Wed Mar 4 23:08:06 2009 # CONFIG_MIPS=y @@ -18,8 +18,10 @@ CONFIG_MIPS=y # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MARKEINS is not set +# CONFIG_MACH_EMMA is not set # CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set @@ -39,20 +41,28 @@ CONFIG_MIPS=y # CONFIG_SNI_RM is not set # CONFIG_MACH_TX39XX is not set CONFIG_MACH_TX49XX=y +# CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +CONFIG_MACH_TXX9=y CONFIG_TOSHIBA_RBTX4927=y CONFIG_TOSHIBA_RBTX4938=y +CONFIG_TOSHIBA_RBTX4939=y CONFIG_SOC_TX4927=y CONFIG_SOC_TX4938=y +CONFIG_SOC_TX4939=y +CONFIG_TXX9_7SEGLED=y # CONFIG_TOSHIBA_FPCIB0 is not set CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y # # Multiplex Pin Select # -CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y +# CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 is not set # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set +CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP=y CONFIG_PCI_TX4927=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set @@ -64,14 +74,18 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y CONFIG_CEVT_R4K=y CONFIG_CEVT_TXX9=y +CONFIG_CSRC_R4K_LIB=y CONFIG_CSRC_R4K=y CONFIG_GPIO_TXX9=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y # CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_GPIO=y @@ -100,6 +114,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 CONFIG_CPU_TX49XX=y # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -107,6 +122,7 @@ CONFIG_CPU_TX49XX=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set CONFIG_SYS_HAS_CPU_TX49XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y @@ -134,13 +150,12 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -176,6 +191,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -190,7 +214,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -207,30 +230,26 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set -# CONFIG_MODULE_UNLOAD is not set +CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -244,7 +263,8 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y +# CONFIG_PROBE_INITRD_HEADER is not set +# CONFIG_FREEZER is not set # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -254,12 +274,15 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set CONFIG_MMU=y # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y @@ -268,15 +291,12 @@ CONFIG_TRAD_SIGNALS=y # CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -318,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -327,14 +348,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # @@ -348,7 +364,90 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set @@ -365,9 +464,60 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_TIMINGS=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +CONFIG_BLK_DEV_IDE_TX4938=y +CONFIG_BLK_DEV_IDE_TX4939=y +CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support @@ -390,7 +540,6 @@ CONFIG_HAVE_IDE=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -412,15 +561,19 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +CONFIG_SMC91X=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set @@ -429,6 +582,9 @@ CONFIG_NE2000=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -436,7 +592,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_TC35815=y -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -445,9 +600,11 @@ CONFIG_TC35815=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -458,6 +615,10 @@ CONFIG_TC35815=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set @@ -502,6 +663,7 @@ CONFIG_SERIAL_TXX9_CONSOLE=y CONFIG_SERIAL_TXX9_STDSERIAL=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -517,17 +679,19 @@ CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set CONFIG_SPI_TXX9=y # # SPI Protocol Masters # -CONFIG_EEPROM_AT25=y # CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y # -# GPIO Support +# Memory mapped GPIO expanders: # # @@ -535,8 +699,14 @@ CONFIG_HAVE_GPIO_LIB=y # # +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set @@ -550,6 +720,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set CONFIG_TXX9_WDT=m # @@ -557,18 +728,21 @@ CONFIG_TXX9_WDT=m # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -599,15 +773,27 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_GPIO=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_IDE_DISK=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y @@ -628,35 +814,47 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set CONFIG_RTC_DRV_RS5C348=y +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set CONFIG_RTC_DRV_DS1742=y # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +CONFIG_RTC_DRV_TX4939=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -687,30 +885,19 @@ CONFIG_GENERIC_ACL=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_HFSPLUS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set +# CONFIG_MISC_FILESYSTEMS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y @@ -740,7 +927,16 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y CONFIG_CMDLINE="" # @@ -748,15 +944,18 @@ CONFIG_CMDLINE="" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/mips/emma/Kconfig b/arch/mips/emma/Kconfig deleted file mode 100644 index 9669c72123c..00000000000 --- a/arch/mips/emma/Kconfig +++ /dev/null @@ -1,29 +0,0 @@ -choice - prompt "Machine type" - depends on MACH_EMMA - default NEC_MARKEINS - -config NEC_MARKEINS - bool "NEC EMMA2RH Mark-eins board" - select SOC_EMMA2RH - select HW_HAS_PCI - help - This enables support for the NEC Electronics Mark-eins boards. - -endchoice - -config SOC_EMMA2RH - bool - select SOC_EMMA - select SYS_HAS_CPU_R5500 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - -config SOC_EMMA - bool - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select IRQ_CPU - select SWAP_IO_SPACE - select SYS_SUPPORTS_BIG_ENDIAN diff --git a/arch/mips/emma/markeins/platform.c b/arch/mips/emma/markeins/platform.c index 88e87f6b344..d5f47e4f0d1 100644 --- a/arch/mips/emma/markeins/platform.c +++ b/arch/mips/emma/markeins/platform.c @@ -141,13 +141,6 @@ static struct platform_device serial_emma = { }, }; -static struct platform_device *devices[] = { - &i2c_emma_devices[0], - &i2c_emma_devices[1], - &i2c_emma_devices[2], - &serial_emma, -}; - static struct mtd_partition markeins_parts[] = { [0] = { .name = "RootFS", @@ -181,11 +174,39 @@ static struct mtd_partition markeins_parts[] = { }, }; +static struct physmap_flash_data markeins_flash_data = { + .width = 2, + .nr_parts = ARRAY_SIZE(markeins_parts), + .parts = markeins_parts +}; + +static struct resource markeins_flash_resource = { + .start = 0x1e000000, + .end = 0x02000000, + .flags = IORESOURCE_MEM +}; + +static struct platform_device markeins_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &markeins_flash_data, + }, + .num_resources = 1, + .resource = &markeins_flash_resource, +}; + +static struct platform_device *devices[] = { + i2c_emma_devices, + i2c_emma_devices + 1, + i2c_emma_devices + 2, + &serial_emma, + &markeins_flash_device, +}; + static int __init platform_devices_setup(void) { - physmap_set_partitions(markeins_parts, ARRAY_SIZE(markeins_parts)); return platform_add_devices(devices, ARRAY_SIZE(devices)); } arch_initcall(platform_devices_setup); - diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h index ac5d541368e..6c5b40905dd 100644 --- a/arch/mips/include/asm/compat.h +++ b/arch/mips/include/asm/compat.h @@ -3,6 +3,8 @@ /* * Architecture specific compatibility types */ +#include <linux/seccomp.h> +#include <linux/thread_info.h> #include <linux/types.h> #include <asm/page.h> #include <asm/ptrace.h> @@ -218,4 +220,9 @@ struct compat_shmid64_ds { compat_ulong_t __unused2; }; +static inline int is_compat_task(void) +{ + return test_thread_flag(TIF_32BIT); +} + #endif /* _ASM_COMPAT_H */ diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h index 43baed16a10..134e1fc8f4d 100644 --- a/arch/mips/include/asm/hazards.h +++ b/arch/mips/include/asm/hazards.h @@ -138,7 +138,8 @@ do { \ __instruction_hazard(); \ } while (0) -#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) +#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \ + defined(CONFIG_CPU_R5500) /* * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. diff --git a/arch/mips/include/asm/prefetch.h b/arch/mips/include/asm/prefetch.h index 17850834ccb..a56594f360e 100644 --- a/arch/mips/include/asm/prefetch.h +++ b/arch/mips/include/asm/prefetch.h @@ -26,7 +26,7 @@ * Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in * current versions due to erratum G105. * - * VR7701 only implements the Load prefetch. + * VR5500 (including VR5701 and VR7701) only implement load prefetch. * * Finally MIPS32 and MIPS64 implement all of the following hints. */ diff --git a/arch/mips/include/asm/seccomp.h b/arch/mips/include/asm/seccomp.h index a6772e9507f..ae6306ebdca 100644 --- a/arch/mips/include/asm/seccomp.h +++ b/arch/mips/include/asm/seccomp.h @@ -15,8 +15,6 @@ */ #ifdef CONFIG_MIPS32_O32 -#define TIF_32BIT TIF_32BIT_REGS - #define __NR_seccomp_read_32 4003 #define __NR_seccomp_write_32 4004 #define __NR_seccomp_exit_32 4001 @@ -24,8 +22,6 @@ #elif defined(CONFIG_MIPS32_N32) -#define TIF_32BIT _TIF_32BIT_ADDR - #define __NR_seccomp_read_32 6000 #define __NR_seccomp_write_32 6001 #define __NR_seccomp_exit_32 6058 diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index 3f76de73c94..676aa2ae191 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -127,6 +127,12 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define TIF_LOAD_WATCH 25 /* If set, load watch registers */ #define TIF_SYSCALL_TRACE 31 /* syscall trace active */ +#ifdef CONFIG_MIPS32_O32 +#define TIF_32BIT TIF_32BIT_REGS +#elif defined(CONFIG_MIPS32_N32) +#define TIF_32BIT _TIF_32BIT_ADDR +#endif /* CONFIG_MIPS32_O32 */ + #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index a7162a4484c..1bdbcad3bb7 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -149,6 +149,7 @@ void __init check_wait(void) case CPU_R4650: case CPU_R4700: case CPU_R5000: + case CPU_R5500: case CPU_NEVADA: case CPU_4KC: case CPU_4KEC: diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 2f8452b404c..1a86f84fa94 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -235,7 +235,7 @@ SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third, #else SYSCALL_DEFINE6(32_ipc, u32, call, int, first, int, second, int, third, - u32, ptr, u32 fifth) + u32, ptr, u32, fifth) { return -ENOSYS; } diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index 1417c649485..48060c635ac 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -172,8 +172,9 @@ static void __cpuinit set_prefetch_parameters(void) */ cache_line_size = cpu_dcache_line_size(); switch (current_cpu_type()) { + case CPU_R5500: case CPU_TX49XX: - /* TX49 supports only Pref_Load */ + /* These processors only support the Pref_Load. */ pref_bias_copy_load = 256; break; diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 42942038d0f..f335cf6cdd7 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -318,6 +318,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_BCM4710: case CPU_LOONGSON2: case CPU_CAVIUM_OCTEON: + case CPU_R5500: if (m4kc_tlbp_war()) uasm_i_nop(p); tlbw(p); diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig index 9fc96e72716..bf34a28895f 100644 --- a/arch/parisc/configs/712_defconfig +++ b/arch/parisc/configs/712_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Fri Oct 12 21:00:07 2007 +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 01:32:55 2009 # CONFIG_PARISC=y CONFIG_MMU=y @@ -33,17 +33,35 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -55,29 +73,38 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_INIT_ALL_POSSIBLE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -91,6 +118,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set # # Processor type and features @@ -114,17 +142,19 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_HPUX is not set # @@ -138,10 +168,6 @@ CONFIG_GSC_LASI=y # CONFIG_EISA is not set # CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -156,16 +182,15 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -173,6 +198,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -203,25 +229,25 @@ CONFIG_INET_TCP_DIAG=m CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -230,6 +256,7 @@ CONFIG_IP_NF_QUEUE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -240,28 +267,26 @@ CONFIG_LLC2=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -276,6 +301,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -298,11 +325,19 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# # CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -342,14 +377,17 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set CONFIG_SCSI_LASI700=y CONFIG_53C700_LE_ON_BE=y # CONFIG_SCSI_ZALON is not set CONFIG_SCSI_DEBUG=m +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m @@ -362,7 +400,6 @@ CONFIG_MD_RAID1=m # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -377,6 +414,9 @@ CONFIG_LASI_82596=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NET_POCKET is not set CONFIG_NETDEV_1000=y @@ -387,6 +427,11 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -401,7 +446,6 @@ CONFIG_PPPOE=m # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=m -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -423,7 +467,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -446,8 +489,8 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set @@ -474,9 +517,11 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -501,72 +546,76 @@ CONFIG_PDC_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=64 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m -# CONFIG_TIPAR is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y # CONFIG_R3964 is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -579,6 +628,14 @@ CONFIG_FB_TILEBLITTING=y CONFIG_FB_STI=y # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -606,15 +663,8 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -630,10 +680,7 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set @@ -641,63 +688,82 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # CONFIG_SND_PORTMAN2X4 is not set - -# -# GSC devices -# +CONFIG_SND_GSC=y CONFIG_SND_HARMONY=y - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set -# CONFIG_RTC_CLASS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices -# -# CONFIG_AUXDISPLAY is not set +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_PARISC=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -707,7 +773,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set @@ -717,19 +783,18 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -759,16 +824,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set @@ -778,35 +840,34 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m @@ -815,6 +876,7 @@ CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set @@ -827,10 +889,6 @@ CONFIG_CIFS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -871,33 +929,28 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - -# # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -909,10 +962,32 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_RODATA=y # @@ -921,57 +996,113 @@ CONFIG_DEBUG_RODATA=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig index ddacc72e38f..f12e4b8349d 100644 --- a/arch/parisc/configs/a500_defconfig +++ b/arch/parisc/configs/a500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Fri Oct 12 21:12:44 2007 +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 01:32:56 2009 # CONFIG_PARISC=y CONFIG_MMU=y @@ -34,18 +34,30 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_CPUSETS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -57,28 +69,40 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_INIT_ALL_POSSIBLE=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # @@ -93,6 +117,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set # # Processor type and features @@ -118,12 +143,12 @@ CONFIG_NODES_SHIFT=3 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set CONFIG_DISCONTIGMEM_MANUAL=y @@ -131,11 +156,12 @@ CONFIG_DISCONTIGMEM_MANUAL=y CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_COMPAT=y CONFIG_NR_CPUS=8 @@ -145,14 +171,13 @@ CONFIG_NR_CPUS=8 # CONFIG_GSC is not set CONFIG_PCI=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_IOMMU_HELPER=y CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m @@ -187,16 +212,15 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -204,6 +228,8 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -234,7 +260,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -250,66 +275,72 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m # CONFIG_IP_NF_TARGET_TTL is not set CONFIG_IP_NF_RAW=m @@ -318,33 +349,30 @@ CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # # CONFIG_IP6_NF_QUEUE is not set CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m -# CONFIG_IP6_NF_MATCH_OWNER is not set CONFIG_IP6_NF_MATCH_IPV6HEADER=m -# CONFIG_IP6_NF_MATCH_AH is not set # CONFIG_IP6_NF_MATCH_MH is not set -# CONFIG_IP6_NF_MATCH_EUI64 is not set -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set # CONFIG_IP_DCCP_CCID3 is not set @@ -356,6 +384,7 @@ CONFIG_IP_DCCP_CCID2=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -366,28 +395,26 @@ CONFIG_LLC2=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -402,6 +429,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -421,14 +450,23 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -468,8 +506,10 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -478,16 +518,21 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 @@ -503,9 +548,11 @@ CONFIG_SCSI_QLOGIC_1280=m CONFIG_SCSI_DEBUG=m # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -514,10 +561,6 @@ CONFIG_MD_RAID1=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set - -# -# Fusion MPT device support -# CONFIG_FUSION=y CONFIG_FUSION_SPI=m CONFIG_FUSION_FC=m @@ -529,20 +572,40 @@ CONFIG_FUSION_CTL=m # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=m + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set @@ -567,33 +630,38 @@ CONFIG_HP100=m # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m -# CONFIG_PCNET32_NAPI is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set CONFIG_E100=m # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=m -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -601,23 +669,31 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -625,6 +701,11 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m @@ -650,7 +731,6 @@ CONFIG_PPP_BSDCOMP=m # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -669,7 +749,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -693,10 +772,13 @@ CONFIG_INPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -721,17 +803,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -CONFIG_AGP=y -CONFIG_AGP_PARISC=y -# CONFIG_DRM is not set # # PCMCIA character devices @@ -739,51 +816,66 @@ CONFIG_AGP_PARISC=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +CONFIG_AGP=y +CONFIG_AGP_PARISC=y +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support @@ -792,50 +884,83 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=160 CONFIG_DUMMY_CONSOLE_ROWS=64 # CONFIG_STI_CONSOLE is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices -# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_PARISC=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -845,7 +970,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set @@ -855,19 +980,19 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -897,16 +1022,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set @@ -916,34 +1038,33 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m @@ -952,6 +1073,7 @@ CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set @@ -964,10 +1086,6 @@ CONFIG_CIFS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1008,33 +1126,28 @@ CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - -# # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1046,10 +1159,33 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_BUILD_DOCSRC is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set # CONFIG_DEBUG_RODATA is not set # @@ -1058,56 +1194,112 @@ CONFIG_FORCED_INLINING=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=m -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=m # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_MICHAEL_MIC is not set -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig index 1bf22c9a461..98bb05ee6e8 100644 --- a/arch/parisc/configs/b180_defconfig +++ b/arch/parisc/configs/b180_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Fri Oct 12 21:16:46 2007 +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 01:32:57 2009 # CONFIG_PARISC=y CONFIG_MMU=y @@ -33,13 +33,29 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set # CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -51,27 +67,34 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_INIT_ALL_POSSIBLE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -85,6 +108,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set # # Processor type and features @@ -108,13 +132,15 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_HPUX is not set # @@ -130,14 +156,14 @@ CONFIG_EISA_NAMES=y CONFIG_ISA=y CONFIG_PCI=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set CONFIG_GSC_DINO=y # CONFIG_PCI_LBA is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_IOMMU_HELPER=y # CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # # PA-RISC specific drivers @@ -151,16 +177,15 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -205,36 +230,37 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set +# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # @@ -247,7 +273,9 @@ CONFIG_IPV6_SIT=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -275,10 +303,18 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=y +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -317,8 +353,10 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -330,12 +368,15 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -346,6 +387,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_NCR53C406A is not set CONFIG_SCSI_LASI700=y CONFIG_53C700_LE_ON_BE=y @@ -360,7 +402,6 @@ CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=40 # CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set @@ -373,9 +414,11 @@ CONFIG_SCSI_NCR53C8XX_SYNC=40 # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -383,26 +426,18 @@ CONFIG_MD_RAID1=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # # -# An alternative FireWire stack is available with EXPERIMENTAL=y +# A new alternative FireWire stack is available with EXPERIMENTAL=y # # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -434,36 +469,49 @@ CONFIG_TULIP=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_CS89x0 is not set # CONFIG_NET_POCKET is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -471,6 +519,11 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PLIP is not set @@ -503,7 +556,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -526,11 +578,12 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set @@ -564,9 +617,11 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -598,75 +653,79 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -691,6 +750,7 @@ CONFIG_FB_STI=y # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -698,7 +758,16 @@ CONFIG_FB_STI=y # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -718,15 +787,8 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_PARISC_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -742,10 +804,7 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set @@ -753,10 +812,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # CONFIG_SND_PORTMAN2X4 is not set - -# -# PCI devices -# +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -765,9 +821,11 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_DARLA20 is not set @@ -792,6 +850,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -809,30 +868,23 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set - -# -# GSC devices -# +CONFIG_SND_GSC=y CONFIG_SND_HARMONY=y - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -840,36 +892,63 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices -# -# CONFIG_AUXDISPLAY is not set +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_PARISC=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -879,19 +958,18 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -917,35 +995,32 @@ CONFIG_JOLIET=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y # CONFIG_HFSPLUS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y @@ -962,10 +1037,6 @@ CONFIG_SMB_FS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1011,7 +1082,9 @@ CONFIG_NLS_UTF8=m # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1019,9 +1092,12 @@ CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1033,10 +1109,29 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_BUILD_DOCSRC is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set # CONFIG_DEBUG_RODATA is not set # @@ -1044,52 +1139,108 @@ CONFIG_FORCED_INLINING=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_PCBC is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index c6def3c1d20..0aa8014f758 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Fri Oct 12 21:24:00 2007 +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 01:32:58 2009 # CONFIG_PARISC=y CONFIG_MMU=y @@ -33,16 +33,29 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -54,29 +67,39 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_INIT_ALL_POSSIBLE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -90,6 +113,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set # # Processor type and features @@ -115,17 +139,19 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_HPUX is not set # @@ -134,14 +160,13 @@ CONFIG_VIRT_TO_BUS=y # CONFIG_GSC is not set CONFIG_PCI=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_IOMMU_HELPER=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -158,16 +183,15 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -175,6 +199,8 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -204,7 +230,6 @@ CONFIG_INET_XFRM_MODE_BEET=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -220,29 +245,34 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y CONFIG_NETFILTER_DEBUG=y +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # # CONFIG_IP6_NF_QUEUE is not set # CONFIG_IP6_NF_IPTABLES is not set @@ -251,6 +281,7 @@ CONFIG_IP_NF_QUEUE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -260,28 +291,26 @@ CONFIG_IP_NF_QUEUE=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -296,6 +325,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -316,59 +347,62 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=m -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_ONLYDISK=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set CONFIG_BLK_DEV_NS87415=y @@ -380,10 +414,7 @@ CONFIG_BLK_DEV_SIIMAGE=m # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -422,8 +453,10 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -433,16 +466,20 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 @@ -458,9 +495,11 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y # CONFIG_SCSI_NSP32 is not set CONFIG_SCSI_DEBUG=m # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -475,13 +514,8 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -# CONFIG_DM_MULTIPATH_EMC is not set -# CONFIG_DM_MULTIPATH_RDAC is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set CONFIG_FUSION=y CONFIG_FUSION_SPI=m # CONFIG_FUSION_FC is not set @@ -493,20 +527,40 @@ CONFIG_FUSION_CTL=m # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=m + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set @@ -528,33 +582,38 @@ CONFIG_TULIP_MMIO=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set CONFIG_E100=m # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_DL2K is not set CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -562,23 +621,31 @@ CONFIG_E1000=m # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -586,6 +653,11 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -594,7 +666,6 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -612,7 +683,6 @@ CONFIG_PPPOE=m # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -634,7 +704,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -652,6 +721,7 @@ CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -672,10 +742,13 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -699,72 +772,77 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -790,6 +868,7 @@ CONFIG_FB_STI=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -798,7 +877,16 @@ CONFIG_FB_STI=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -818,15 +906,8 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -842,20 +923,16 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y CONFIG_SND_AD1889=y # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -864,10 +941,12 @@ CONFIG_SND_AD1889=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_DARLA20 is not set @@ -892,6 +971,7 @@ CONFIG_SND_AD1889=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -909,47 +989,59 @@ CONFIG_SND_AD1889=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# USB devices -# +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -958,12 +1050,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -971,32 +1071,37 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1004,15 +1109,10 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m -# CONFIG_USB_MON is not set # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1021,7 +1121,7 @@ CONFIG_USB_MICROTEK=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set CONFIG_USB_LEGOTOWER=m # CONFIG_USB_LCD is not set @@ -1037,37 +1137,59 @@ CONFIG_USB_LEGOTOWER=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set # -# USB DSL modem support -# - -# -# USB Gadget Support +# OTG and related infrastructure # -# CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices +# Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_PARISC=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1077,25 +1199,24 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1124,16 +1245,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1142,32 +1260,31 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1181,10 +1298,6 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1225,33 +1338,28 @@ CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - -# # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1263,10 +1371,33 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_BUILD_DOCSRC is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_RODATA=y # @@ -1274,54 +1405,110 @@ CONFIG_DEBUG_RODATA=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=m -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_MICHAEL_MIC is not set -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/default_defconfig index 448a757b06c..283a96c1b5e 100644 --- a/arch/parisc/configs/default_defconfig +++ b/arch/parisc/configs/default_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23 -# Fri Oct 12 20:54:57 2007 +# Linux kernel version: 2.6.29-rc8 +# Fri Mar 13 01:32:59 2009 # CONFIG_PARISC=y CONFIG_MMU=y @@ -33,17 +33,35 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -55,29 +73,39 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +CONFIG_INIT_ALL_POSSIBLE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -91,6 +119,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set # # Processor type and features @@ -114,17 +143,19 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_HPUX is not set # @@ -140,15 +171,14 @@ CONFIG_EISA_NAMES=y # CONFIG_ISA is not set CONFIG_PCI=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set CONFIG_GSC_DINO=y CONFIG_PCI_LBA=y CONFIG_IOSAPIC=y CONFIG_IOMMU_SBA=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_IOMMU_HELPER=y CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -183,16 +213,15 @@ CONFIG_PDC_STABLE=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -200,6 +229,8 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=y CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -245,8 +276,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -254,6 +287,7 @@ CONFIG_IPV6_SIT=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -264,28 +298,26 @@ CONFIG_LLC2=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -300,6 +332,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -330,63 +364,68 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECS=y # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_ONLYDISK=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set CONFIG_BLK_DEV_NS87415=y @@ -398,10 +437,7 @@ CONFIG_BLK_DEV_NS87415=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -440,8 +476,10 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -452,11 +490,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -464,6 +505,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_MVSAS is not set CONFIG_SCSI_LASI700=y CONFIG_53C700_LE_ON_BE=y # CONFIG_SCSI_STEX is not set @@ -487,9 +529,11 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -505,32 +549,47 @@ CONFIG_BLK_DEV_DM=y # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set # -# Fusion MPT device support +# IEEE 1394 (FireWire) support # -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # -# IEEE 1394 (FireWire) support +# Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_LASI_82596=y @@ -550,13 +609,15 @@ CONFIG_TULIP=y # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_PCMCIA_XIRCOM is not set -# CONFIG_PCMCIA_XIRTULIP is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -564,7 +625,7 @@ CONFIG_NET_PCI=y # CONFIG_AC3200 is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set +# CONFIG_CS89x0 is not set # CONFIG_E100 is not set # CONFIG_LNE390 is not set # CONFIG_FEALNX is not set @@ -574,19 +635,24 @@ CONFIG_NET_PCI=y # CONFIG_ES3210 is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=y # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -594,23 +660,31 @@ CONFIG_ACENIC=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -618,6 +692,11 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -626,7 +705,6 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set CONFIG_NET_PCMCIA=y # CONFIG_PCMCIA_3C589 is not set @@ -654,7 +732,6 @@ CONFIG_PPPOE=m # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -676,7 +753,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -699,11 +775,12 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set CONFIG_MOUSE_HIL=y # CONFIG_INPUT_JOYSTICK is not set @@ -729,10 +806,13 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -759,21 +839,16 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=64 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m -# CONFIG_TIPAR is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set # # PCMCIA character devices @@ -781,60 +856,70 @@ CONFIG_GEN_RTC_X=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -860,6 +945,7 @@ CONFIG_FB_STI=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -868,7 +954,16 @@ CONFIG_FB_STI=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -896,15 +991,8 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_PARISC_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -920,11 +1008,9 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set @@ -932,10 +1018,8 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # CONFIG_SND_PORTMAN2X4 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y CONFIG_SND_AD1889=y # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -944,10 +1028,12 @@ CONFIG_SND_AD1889=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_DARLA20 is not set @@ -972,6 +1058,7 @@ CONFIG_SND_AD1889=y # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -989,58 +1076,67 @@ CONFIG_SND_AD1889=y # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# USB devices -# +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# +CONFIG_SND_PCMCIA=y # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set - -# -# GSC devices -# +CONFIG_SND_GSC=y CONFIG_SND_HARMONY=y - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1049,12 +1145,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1062,19 +1164,23 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set @@ -1084,16 +1190,11 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers # # CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1102,7 +1203,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1118,38 +1219,60 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set # -# USB DSL modem support -# - -# -# USB Gadget Support +# OTG and related infrastructure # -# CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices +# Platform RTC drivers # -# CONFIG_AUXDISPLAY is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_PARISC=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1159,21 +1282,20 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1202,16 +1324,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set @@ -1221,33 +1340,32 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m CONFIG_SMB_FS=m @@ -1256,6 +1374,7 @@ CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set @@ -1268,10 +1387,6 @@ CONFIG_CIFS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1312,33 +1427,28 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m - -# # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1350,10 +1460,33 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_BUILD_DOCSRC is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set # CONFIG_DEBUG_RODATA is not set # @@ -1362,56 +1495,112 @@ CONFIG_FORCED_INLINING=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c index bd9a4db3bd4..5cbe9f9e5d9 100644 --- a/arch/parisc/hpux/fs.c +++ b/arch/parisc/hpux/fs.c @@ -137,7 +137,6 @@ int hpux_getdents(unsigned int fd, struct hpux_dirent __user *dirent, unsigned i error = count - buf.count; } -out_putf: fput(file); out: return error; diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h index ffb208840ec..89fb40005e3 100644 --- a/arch/parisc/include/asm/assembly.h +++ b/arch/parisc/include/asm/assembly.h @@ -79,6 +79,7 @@ #include <asm/asm-offsets.h> #include <asm/page.h> +#include <asm/types.h> #include <asm/asmregs.h> @@ -129,27 +130,27 @@ /* Shift Left - note the r and t can NOT be the same! */ .macro shl r, sa, t - dep,z \r, 31-\sa, 32-\sa, \t + dep,z \r, 31-(\sa), 32-(\sa), \t .endm /* The PA 2.0 shift left */ .macro shlw r, sa, t - depw,z \r, 31-\sa, 32-\sa, \t + depw,z \r, 31-(\sa), 32-(\sa), \t .endm /* And the PA 2.0W shift left */ .macro shld r, sa, t - depd,z \r, 63-\sa, 64-\sa, \t + depd,z \r, 63-(\sa), 64-(\sa), \t .endm /* Shift Right - note the r and t can NOT be the same! */ .macro shr r, sa, t - extru \r, 31-\sa, 32-\sa, \t + extru \r, 31-(\sa), 32-(\sa), \t .endm /* pa20w version of shift right */ .macro shrd r, sa, t - extrd,u \r, 63-\sa, 64-\sa, \t + extrd,u \r, 63-(\sa), 64-(\sa), \t .endm /* load 32-bit 'value' into 'reg' compensating for the ldil diff --git a/arch/parisc/include/asm/io.h b/arch/parisc/include/asm/io.h index d3031d1f9d0..1f6d2ae7aba 100644 --- a/arch/parisc/include/asm/io.h +++ b/arch/parisc/include/asm/io.h @@ -174,15 +174,48 @@ static inline void __raw_writeq(unsigned long long b, volatile void __iomem *add *(volatile unsigned long long __force *) addr = b; } -/* readb can never be const, so use __fswab instead of le*_to_cpu */ -#define readb(addr) __raw_readb(addr) -#define readw(addr) le16_to_cpu(__raw_readw(addr)) -#define readl(addr) le32_to_cpu(__raw_readl(addr)) -#define readq(addr) le64_to_cpu(__raw_readq(addr)) -#define writeb(b, addr) __raw_writeb(b, addr) -#define writew(b, addr) __raw_writew(cpu_to_le16(b), addr) -#define writel(b, addr) __raw_writel(cpu_to_le32(b), addr) -#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr) +static inline unsigned char readb(const volatile void __iomem *addr) +{ + return __raw_readb(addr); +} +static inline unsigned short readw(const volatile void __iomem *addr) +{ + return le16_to_cpu(__raw_readw(addr)); +} +static inline unsigned int readl(const volatile void __iomem *addr) +{ + return le32_to_cpu(__raw_readl(addr)); +} +static inline unsigned long long readq(const volatile void __iomem *addr) +{ + return le64_to_cpu(__raw_readq(addr)); +} + +static inline void writeb(unsigned char b, volatile void __iomem *addr) +{ + __raw_writeb(b, addr); +} +static inline void writew(unsigned short w, volatile void __iomem *addr) +{ + __raw_writew(cpu_to_le16(w), addr); +} +static inline void writel(unsigned int l, volatile void __iomem *addr) +{ + __raw_writel(cpu_to_le32(l), addr); +} +static inline void writeq(unsigned long long q, volatile void __iomem *addr) +{ + __raw_writeq(cpu_to_le64(q), addr); +} + +#define readb readb +#define readw readw +#define readl readl +#define readq readq +#define writeb writeb +#define writew writew +#define writel writel +#define writeq writeq #define readb_relaxed(addr) readb(addr) #define readw_relaxed(addr) readw(addr) diff --git a/arch/parisc/include/asm/irq.h b/arch/parisc/include/asm/irq.h index 399c81981ed..dfa26b67f91 100644 --- a/arch/parisc/include/asm/irq.h +++ b/arch/parisc/include/asm/irq.h @@ -49,7 +49,7 @@ extern unsigned long txn_alloc_addr(unsigned int); extern unsigned long txn_affinity_addr(unsigned int irq, int cpu); extern int cpu_claim_irq(unsigned int irq, struct irq_chip *, void *); -extern int cpu_check_affinity(unsigned int irq, cpumask_t *dest); +extern int cpu_check_affinity(unsigned int irq, const struct cpumask *dest); /* soft power switch support (power.c) */ extern struct tasklet_struct power_tasklet; diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h index 1c6dbb6f6e5..cd4c0b2a8e7 100644 --- a/arch/parisc/include/asm/uaccess.h +++ b/arch/parisc/include/asm/uaccess.h @@ -241,6 +241,7 @@ unsigned long copy_in_user(void __user *dst, const void __user *src, unsigned lo #define __copy_to_user_inatomic __copy_to_user #define __copy_from_user_inatomic __copy_from_user +struct pt_regs; int fixup_exception(struct pt_regs *regs); #endif /* __PARISC_UACCESS_H */ diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index 5259d8c2067..837530ea32e 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -551,10 +551,7 @@ void flush_cache_range(struct vm_area_struct *vma, { int sr3; - if (!vma->vm_mm->context) { - BUG(); - return; - } + BUG_ON(!vma->vm_mm->context); sr3 = mfsp(3); if (vma->vm_mm->context == sr3) { diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index d1fa4edd2d8..0db9fdcb770 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -368,7 +368,7 @@ * abstractions for the macros */ .macro EXTR reg1,start,length,reg2 #ifdef CONFIG_64BIT - extrd,u \reg1,32+\start,\length,\reg2 + extrd,u \reg1,32+(\start),\length,\reg2 #else extrw,u \reg1,\start,\length,\reg2 #endif @@ -376,7 +376,7 @@ .macro DEP reg1,start,length,reg2 #ifdef CONFIG_64BIT - depd \reg1,32+\start,\length,\reg2 + depd \reg1,32+(\start),\length,\reg2 #else depw \reg1,\start,\length,\reg2 #endif @@ -384,7 +384,7 @@ .macro DEPI val,start,length,reg #ifdef CONFIG_64BIT - depdi \val,32+\start,\length,\reg + depdi \val,32+(\start),\length,\reg #else depwi \val,\start,\length,\reg #endif diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c index 03f26bd75bd..f6d241238a7 100644 --- a/arch/parisc/kernel/firmware.c +++ b/arch/parisc/kernel/firmware.c @@ -151,7 +151,7 @@ static void convert_to_wide(unsigned long *addr) } #ifdef CONFIG_64BIT -void __init set_firmware_width_unlocked(void) +void __cpuinit set_firmware_width_unlocked(void) { int ret; @@ -168,7 +168,7 @@ void __init set_firmware_width_unlocked(void) * This function must be called before any pdc_* function that uses the * convert_to_wide function. */ -void __init set_firmware_width(void) +void __cpuinit set_firmware_width(void) { unsigned long flags; spin_lock_irqsave(&pdc_lock, flags); @@ -176,11 +176,11 @@ void __init set_firmware_width(void) spin_unlock_irqrestore(&pdc_lock, flags); } #else -void __init set_firmware_width_unlocked(void) { +void __cpuinit set_firmware_width_unlocked(void) { return; } -void __init set_firmware_width(void) { +void __cpuinit set_firmware_width(void) { return; } #endif /*CONFIG_64BIT*/ @@ -302,7 +302,7 @@ int pdc_chassis_warn(unsigned long *warn) return retval; } -int __init pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info) +int __cpuinit pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info) { int ret; @@ -323,7 +323,7 @@ int __init pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info) * This PDC call returns the presence and status of all the coprocessors * attached to the processor. */ -int __init pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info) +int __cpuinit pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info) { int ret; unsigned long flags; diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index ac2c822928c..29e70e16ede 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -112,7 +112,7 @@ void cpu_end_irq(unsigned int irq) } #ifdef CONFIG_SMP -int cpu_check_affinity(unsigned int irq, cpumask_t *dest) +int cpu_check_affinity(unsigned int irq, const struct cpumask *dest) { int cpu_dest; @@ -120,23 +120,25 @@ int cpu_check_affinity(unsigned int irq, cpumask_t *dest) if (CHECK_IRQ_PER_CPU(irq)) { /* Bad linux design decision. The mask has already * been set; we must reset it */ - irq_desc[irq].affinity = CPU_MASK_ALL; + cpumask_setall(&irq_desc[irq].affinity); return -EINVAL; } /* whatever mask they set, we just allow one CPU */ cpu_dest = first_cpu(*dest); - *dest = cpumask_of_cpu(cpu_dest); - return 0; + return cpu_dest; } static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) { - if (cpu_check_affinity(irq, dest)) + int cpu_dest; + + cpu_dest = cpu_check_affinity(irq, dest); + if (cpu_dest < 0) return; - irq_desc[irq].affinity = *dest; + cpumask_copy(&irq_desc[irq].affinity, &cpumask_of_cpu(cpu_dest)); } #endif @@ -295,7 +297,7 @@ int txn_alloc_irq(unsigned int bits_wide) unsigned long txn_affinity_addr(unsigned int irq, int cpu) { #ifdef CONFIG_SMP - irq_desc[irq].affinity = cpumask_of_cpu(cpu); + cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu)); #endif return per_cpu(cpu_data, cpu).txn_addr; @@ -352,7 +354,7 @@ void do_cpu_irq_mask(struct pt_regs *regs) irq = eirr_to_irq(eirr_val); #ifdef CONFIG_SMP - dest = irq_desc[irq].affinity; + cpumask_copy(&dest, &irq_desc[irq].affinity); if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) && !cpu_isset(smp_processor_id(), dest)) { int cpu = first_cpu(dest); diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index df47895db82..7d927eac932 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -447,10 +447,7 @@ static void pa11_dma_free_consistent (struct device *dev, size_t size, void *vad static dma_addr_t pa11_dma_map_single(struct device *dev, void *addr, size_t size, enum dma_data_direction direction) { - if (direction == DMA_NONE) { - printk(KERN_ERR "pa11_dma_map_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0)); - BUG(); - } + BUG_ON(direction == DMA_NONE); flush_kernel_dcache_range((unsigned long) addr, size); return virt_to_phys(addr); @@ -458,10 +455,7 @@ static dma_addr_t pa11_dma_map_single(struct device *dev, void *addr, size_t siz static void pa11_dma_unmap_single(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { - if (direction == DMA_NONE) { - printk(KERN_ERR "pa11_dma_unmap_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0)); - BUG(); - } + BUG_ON(direction == DMA_NONE); if (direction == DMA_TO_DEVICE) return; @@ -480,8 +474,7 @@ static int pa11_dma_map_sg(struct device *dev, struct scatterlist *sglist, int n { int i; - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); for (i = 0; i < nents; i++, sglist++ ) { unsigned long vaddr = sg_virt_addr(sglist); @@ -496,8 +489,7 @@ static void pa11_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, in { int i; - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); if (direction == DMA_TO_DEVICE) return; @@ -511,16 +503,14 @@ static void pa11_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, in static void pa11_dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction) { - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size); } static void pa11_dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction) { - if (direction == DMA_NONE) - BUG(); + BUG_ON(direction == DMA_NONE); flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size); } diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 7c155c254e7..9d704d9831d 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -304,10 +304,8 @@ static void __init setup_bootmem(void) */ max_low_pfn = max_pfn; - if ((bootmap_pfn - bootmap_start_pfn) != bootmap_pages) { - printk(KERN_WARNING "WARNING! bootmap sizing is messed up!\n"); - BUG(); - } + /* bootmap sizing messed up? */ + BUG_ON((bootmap_pfn - bootmap_start_pfn) != bootmap_pages); /* reserve PAGE0 pdc memory, kernel text/data/bss & bootmap */ diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig index b6888384dd7..f5698f962e5 100644 --- a/arch/powerpc/configs/40x/virtex_defconfig +++ b/arch/powerpc/configs/40x/virtex_defconfig @@ -686,7 +686,7 @@ CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig index 15aab1ca638..1bf0a63614b 100644 --- a/arch/powerpc/configs/44x/virtex5_defconfig +++ b/arch/powerpc/configs/44x/virtex5_defconfig @@ -691,7 +691,7 @@ CONFIG_SERIAL_UARTLITE_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index aa5855a156d..15900dcf0bf 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:29 2009 +# Linux kernel version: 2.6.29-rc6 +# Fri Mar 6 00:07:38 2009 # # CONFIG_PPC64 is not set @@ -71,6 +71,15 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -88,6 +97,7 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -153,11 +163,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -294,7 +299,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NET_NS is not set CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y @@ -508,8 +512,8 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_OF_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # @@ -587,7 +591,6 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -617,13 +620,19 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=m +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -839,6 +848,7 @@ CONFIG_R8169=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -1037,8 +1047,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index 86512c8790d..94903465ea1 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:46 2009 +# Linux kernel version: 2.6.29-rc6 +# Fri Mar 6 00:09:08 2009 # # CONFIG_PPC64 is not set @@ -71,6 +71,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -144,11 +153,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -377,8 +381,8 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_OF_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # @@ -452,7 +456,6 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -478,13 +481,19 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -677,6 +686,7 @@ CONFIG_R8169=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -818,8 +828,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -1159,6 +1167,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_EXPORTFS=m # # Partition Types diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index 2ca7be65c2d..244f997de79 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -12,7 +12,6 @@ #include <linux/kernel.h> #include <linux/initrd.h> -#include <linux/mtd/physmap.h> #include <linux/of_platform.h> #include <asm/time.h> @@ -22,39 +21,6 @@ #include "mpc10x.h" -static struct mtd_partition linkstation_physmap_partitions[] = { - { - .name = "mtd_firmimg", - .offset = 0x000000, - .size = 0x300000, - }, - { - .name = "mtd_bootcode", - .offset = 0x300000, - .size = 0x070000, - }, - { - .name = "mtd_status", - .offset = 0x370000, - .size = 0x010000, - }, - { - .name = "mtd_conf", - .offset = 0x380000, - .size = 0x080000, - }, - { - .name = "mtd_allflash", - .offset = 0x000000, - .size = 0x400000, - }, - { - .name = "mtd_data", - .offset = 0x310000, - .size = 0x0f0000, - }, -}; - static __initdata struct of_device_id of_bus_ids[] = { { .type = "soc", }, { .compatible = "simple-bus", }, @@ -99,10 +65,6 @@ static int __init linkstation_add_bridge(struct device_node *dev) static void __init linkstation_setup_arch(void) { struct device_node *np; -#ifdef CONFIG_MTD_PHYSMAP - physmap_set_partitions(linkstation_physmap_partitions, - ARRAY_SIZE(linkstation_physmap_partitions)); -#endif /* Lookup PCI host bridges */ for_each_compatible_node(np, "pci", "mpc10x-pci") diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c index 8864e488498..613070e9ddb 100644 --- a/arch/powerpc/platforms/embedded6xx/storcenter.c +++ b/arch/powerpc/platforms/embedded6xx/storcenter.c @@ -14,7 +14,6 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/initrd.h> -#include <linux/mtd/physmap.h> #include <linux/of_platform.h> #include <asm/system.h> @@ -26,32 +25,6 @@ #include "mpc10x.h" -#ifdef CONFIG_MTD_PHYSMAP -static struct mtd_partition storcenter_physmap_partitions[] = { - { - .name = "kernel", - .offset = 0x000000, - .size = 0x170000, - }, - { - .name = "rootfs", - .offset = 0x170000, - .size = 0x590000, - }, - { - .name = "uboot", - .offset = 0x700000, - .size = 0x040000, - }, - { - .name = "config", - .offset = 0x740000, - .size = 0x0c0000, - }, -}; -#endif - - static __initdata struct of_device_id storcenter_of_bus[] = { { .name = "soc", }, {}, @@ -96,11 +69,6 @@ static void __init storcenter_setup_arch(void) { struct device_node *np; -#ifdef CONFIG_MTD_PHYSMAP - physmap_set_partitions(storcenter_physmap_partitions, - ARRAY_SIZE(storcenter_physmap_partitions)); -#endif - /* Lookup PCI host bridges */ for_each_compatible_node(np, "pci", "mpc10x-pci") storcenter_add_bridge(np); diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 72da416f616..15b6d450fbf 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -22,6 +22,7 @@ #include <linux/gpio.h> #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> +#include <media/soc_camera.h> #include <media/soc_camera_platform.h> #include <media/sh_mobile_ceu.h> #include <video/sh_mobile_lcdc.h> diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c index e289376198e..1c378d8e90c 100644 --- a/arch/sparc/kernel/irq_64.c +++ b/arch/sparc/kernel/irq_64.c @@ -323,17 +323,25 @@ static void sun4u_set_affinity(unsigned int virt_irq, sun4u_irq_enable(virt_irq); } +/* Don't do anything. The desc->status check for IRQ_DISABLED in + * handler_irq() will skip the handler call and that will leave the + * interrupt in the sent state. The next ->enable() call will hit the + * ICLR register to reset the state machine. + * + * This scheme is necessary, instead of clearing the Valid bit in the + * IMAP register, to handle the case of IMAP registers being shared by + * multiple INOs (and thus ICLR registers). Since we use a different + * virtual IRQ for each shared IMAP instance, the generic code thinks + * there is only one user so it prematurely calls ->disable() on + * free_irq(). + * + * We have to provide an explicit ->disable() method instead of using + * NULL to get the default. The reason is that if the generic code + * sees that, it also hooks up a default ->shutdown method which + * invokes ->mask() which we do not want. See irq_chip_set_defaults(). + */ static void sun4u_irq_disable(unsigned int virt_irq) { - struct irq_handler_data *data = get_irq_chip_data(virt_irq); - - if (likely(data)) { - unsigned long imap = data->imap; - unsigned long tmp = upa_readq(imap); - - tmp &= ~IMAP_VALID; - upa_writeq(tmp, imap); - } } static void sun4u_irq_eoi(unsigned int virt_irq) @@ -746,7 +754,8 @@ void handler_irq(int irq, struct pt_regs *regs) desc = irq_desc + virt_irq; - desc->handle_irq(virt_irq, desc); + if (!(desc->status & IRQ_DISABLED)) + desc->handle_irq(virt_irq, desc); bucket_pa = next_pa; } diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 15e8b7c4de1..8e3d69e4fcb 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -64,6 +64,11 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) ret = poke_user(child, addr, data); break; + case PTRACE_SYSEMU: + case PTRACE_SYSEMU_SINGLESTEP: + ret = -EIO; + break; + /* continue and stop at next (return from) syscall */ case PTRACE_SYSCALL: /* restart after signal. */ diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c index 74f49bb9b12..89b48a116a8 100644 --- a/arch/um/os-Linux/user_syms.c +++ b/arch/um/os-Linux/user_syms.c @@ -14,7 +14,6 @@ #undef memset extern size_t strlen(const char *); -extern void *memcpy(void *, const void *, size_t); extern void *memmove(void *, const void *, size_t); extern void *memset(void *, int, size_t); extern int printf(const char *, ...); @@ -24,7 +23,11 @@ extern int printf(const char *, ...); EXPORT_SYMBOL(strstr); #endif +#ifndef __x86_64__ +extern void *memcpy(void *, const void *, size_t); EXPORT_SYMBOL(memcpy); +#endif + EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(printf); diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index ca5ffb2856b..edc90f23e70 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -37,8 +37,6 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...); #else /* !CONFIG_X86_32 */ -#define MAX_EFI_IO_PAGES 100 - extern u64 efi_call0(void *fp); extern u64 efi_call1(void *fp, u64 arg1); extern u64 efi_call2(void *fp, u64 arg1, u64 arg2); diff --git a/arch/x86/include/asm/fixmap_64.h b/arch/x86/include/asm/fixmap_64.h index 00a30ab9b1a..8be740977db 100644 --- a/arch/x86/include/asm/fixmap_64.h +++ b/arch/x86/include/asm/fixmap_64.h @@ -16,7 +16,6 @@ #include <asm/apicdef.h> #include <asm/page.h> #include <asm/vsyscall.h> -#include <asm/efi.h> /* * Here we define all the compile-time 'special' virtual @@ -43,9 +42,6 @@ enum fixed_addresses { FIX_APIC_BASE, /* local (CPU) APIC) -- required for SMP or not */ FIX_IO_APIC_BASE_0, FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1, - FIX_EFI_IO_MAP_LAST_PAGE, - FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE - + MAX_EFI_IO_PAGES - 1, #ifdef CONFIG_PARAVIRT FIX_PARAVIRT_BOOTMAP, #endif diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h index 48f0004db8c..71c9e518398 100644 --- a/arch/x86/include/asm/i387.h +++ b/arch/x86/include/asm/i387.h @@ -172,7 +172,13 @@ static inline void __save_init_fpu(struct task_struct *tsk) #else /* CONFIG_X86_32 */ -extern void finit(void); +#ifdef CONFIG_MATH_EMULATION +extern void finit_task(struct task_struct *tsk); +#else +static inline void finit_task(struct task_struct *tsk) +{ +} +#endif static inline void tolerant_fwait(void) { diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index b585e04cbc9..3178c3acd97 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -277,7 +277,6 @@ static struct cpufreq_driver p4clockmod_driver = { .name = "p4-clockmod", .owner = THIS_MODULE, .attr = p4clockmod_attr, - .hide_interface = 1, }; diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index 169a120587b..87b67e3a765 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -729,7 +729,7 @@ struct pebs_tracer *ds_request_pebs(struct task_struct *task, spin_unlock_irqrestore(&ds_lock, irq); - ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_bts); + ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_pebs); ds_resume_pebs(tracer); return tracer; @@ -1029,5 +1029,4 @@ void ds_copy_thread(struct task_struct *tsk, struct task_struct *father) void ds_exit_thread(struct task_struct *tsk) { - WARN_ON(tsk->thread.ds_ctx); } diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index 1119d247fe1..eb1ef3b67dd 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -467,7 +467,7 @@ void __init efi_enter_virtual_mode(void) efi_memory_desc_t *md; efi_status_t status; unsigned long size; - u64 end, systab, addr, npages; + u64 end, systab, addr, npages, end_pfn; void *p, *va; efi.systab = NULL; @@ -479,7 +479,10 @@ void __init efi_enter_virtual_mode(void) size = md->num_pages << EFI_PAGE_SHIFT; end = md->phys_addr + size; - if (PFN_UP(end) <= max_low_pfn_mapped) + end_pfn = PFN_UP(end); + if (end_pfn <= max_low_pfn_mapped + || (end_pfn > (1UL << (32 - PAGE_SHIFT)) + && end_pfn <= max_pfn_mapped)) va = __va(md->phys_addr); else va = efi_ioremap(md->phys_addr, size); diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c index 652c5287215..cb783b92c50 100644 --- a/arch/x86/kernel/efi_64.c +++ b/arch/x86/kernel/efi_64.c @@ -99,24 +99,11 @@ void __init efi_call_phys_epilog(void) void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size) { - static unsigned pages_mapped __initdata; - unsigned i, pages; - unsigned long offset; + unsigned long last_map_pfn; - pages = PFN_UP(phys_addr + size) - PFN_DOWN(phys_addr); - offset = phys_addr & ~PAGE_MASK; - phys_addr &= PAGE_MASK; - - if (pages_mapped + pages > MAX_EFI_IO_PAGES) + last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size); + if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) return NULL; - for (i = 0; i < pages; i++) { - __set_fixmap(FIX_EFI_IO_MAP_FIRST_PAGE - pages_mapped, - phys_addr, PAGE_KERNEL); - phys_addr += PAGE_SIZE; - pages_mapped++; - } - - return (void __iomem *)__fix_to_virt(FIX_EFI_IO_MAP_FIRST_PAGE - \ - (pages_mapped - pages)) + offset; + return (void __iomem *)__va(phys_addr); } diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index b0f61f0dcd0..f2f8540a7f3 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -136,7 +136,7 @@ int init_fpu(struct task_struct *tsk) #ifdef CONFIG_X86_32 if (!HAVE_HWFP) { memset(tsk->thread.xstate, 0, xstate_size); - finit(); + finit_task(tsk); set_stopped_child_used_math(tsk); return 0; } diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 2b46eb41643..4526b3a75ed 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -217,6 +217,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"), }, }, + { /* Handle problems with rebooting on Dell XPS710 */ + .callback = set_bios_reboot, + .ident = "Dell XPS710", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"), + }, + }, { } }; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index c461f6d6907..6a8811a6932 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -770,6 +770,9 @@ void __init setup_arch(char **cmdline_p) finish_e820_parsing(); + if (efi_enabled) + efi_init(); + dmi_scan_machine(); dmi_check_system(bad_bios_dmi_table); @@ -789,8 +792,6 @@ void __init setup_arch(char **cmdline_p) insert_resource(&iomem_resource, &data_resource); insert_resource(&iomem_resource, &bss_resource); - if (efi_enabled) - efi_init(); #ifdef CONFIG_X86_32 if (ppro_with_ram_bug()) { diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 92f1c6f3e19..960a8d9c049 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -343,6 +343,11 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx, * flush_tlb_user() for both user and kernel mappings unless * the Page Global Enable (PGE) feature bit is set. */ *dx |= 0x00002000; + /* We also lie, and say we're family id 5. 6 or greater + * leads to a rdmsr in early_init_intel which we can't handle. + * Family ID is returned as bits 8-12 in ax. */ + *ax &= 0xFFFFF0FF; + *ax |= 0x00000500; break; case 0x80000000: /* Futureproof this a little: if they ask how much extended @@ -589,19 +594,21 @@ static void __init lguest_init_IRQ(void) /* Some systems map "vectors" to interrupts weirdly. Lguest has * a straightforward 1 to 1 mapping, so force that here. */ __get_cpu_var(vector_irq)[vector] = i; - if (vector != SYSCALL_VECTOR) { - set_intr_gate(vector, - interrupt[vector-FIRST_EXTERNAL_VECTOR]); - set_irq_chip_and_handler_name(i, &lguest_irq_controller, - handle_level_irq, - "level"); - } + if (vector != SYSCALL_VECTOR) + set_intr_gate(vector, interrupt[i]); } /* This call is required to set up for 4k stacks, where we have * separate stacks for hard and soft interrupts. */ irq_ctx_init(smp_processor_id()); } +void lguest_setup_irq(unsigned int irq) +{ + irq_to_desc_alloc_cpu(irq, 0); + set_irq_chip_and_handler_name(irq, &lguest_irq_controller, + handle_level_irq, "level"); +} + /* * Time. * diff --git a/arch/x86/math-emu/fpu_aux.c b/arch/x86/math-emu/fpu_aux.c index 491e737ce54..aa098708877 100644 --- a/arch/x86/math-emu/fpu_aux.c +++ b/arch/x86/math-emu/fpu_aux.c @@ -30,20 +30,29 @@ static void fclex(void) } /* Needs to be externally visible */ -void finit(void) +void finit_task(struct task_struct *tsk) { - control_word = 0x037f; - partial_status = 0; - top = 0; /* We don't keep top in the status word internally. */ - fpu_tag_word = 0xffff; + struct i387_soft_struct *soft = &tsk->thread.xstate->soft; + struct address *oaddr, *iaddr; + soft->cwd = 0x037f; + soft->swd = 0; + soft->ftop = 0; /* We don't keep top in the status word internally. */ + soft->twd = 0xffff; /* The behaviour is different from that detailed in Section 15.1.6 of the Intel manual */ - operand_address.offset = 0; - operand_address.selector = 0; - instruction_address.offset = 0; - instruction_address.selector = 0; - instruction_address.opcode = 0; - no_ip_update = 1; + oaddr = (struct address *)&soft->foo; + oaddr->offset = 0; + oaddr->selector = 0; + iaddr = (struct address *)&soft->fip; + iaddr->offset = 0; + iaddr->selector = 0; + iaddr->opcode = 0; + soft->no_update = 1; +} + +void finit(void) +{ + finit_task(current); } /* diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 9f205030d9a..6a518dd08a3 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -451,23 +451,24 @@ static void rcu_free_kmmio_fault_pages(struct rcu_head *head) static void remove_kmmio_fault_pages(struct rcu_head *head) { - struct kmmio_delayed_release *dr = container_of( - head, - struct kmmio_delayed_release, - rcu); + struct kmmio_delayed_release *dr = + container_of(head, struct kmmio_delayed_release, rcu); struct kmmio_fault_page *p = dr->release_list; struct kmmio_fault_page **prevp = &dr->release_list; unsigned long flags; + spin_lock_irqsave(&kmmio_lock, flags); while (p) { - if (!p->count) + if (!p->count) { list_del_rcu(&p->list); - else + prevp = &p->release_next; + } else { *prevp = p->release_next; - prevp = &p->release_next; + } p = p->release_next; } spin_unlock_irqrestore(&kmmio_lock, flags); + /* This is the real RCU destroy call. */ call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages); } diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 7be47d1a97e..7233bd7e357 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -515,6 +515,17 @@ static int split_large_page(pte_t *kpte, unsigned long address) * primary protection behavior: */ __set_pmd_pte(kpte, address, mk_pte(base, __pgprot(_KERNPG_TABLE))); + + /* + * Intel Atom errata AAH41 workaround. + * + * The real fix should be in hw or in a microcode update, but + * we also probabilistically try to reduce the window of having + * a large TLB mixed with 4K TLBs while instruction fetches are + * going on. + */ + __flush_tlb_all(); + base = NULL; out_unlock: diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 6c873dceb17..98120083043 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -103,9 +103,6 @@ config MATH_EMULATION help Can we use information of configuration file? -config HIGHMEM - bool "High memory support" - endmenu menu "Platform options" diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index 9606d2bd1dd..4ec1633c294 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -44,6 +44,8 @@ #include <asm/setup.h> #include <asm/param.h> +#include <platform/hardware.h> + #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) struct screen_info screen_info = { 0, 24, 0, 0, 0, 80, 0, 0, 0, 24, 1, 16}; #endif diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index c7a021d9f69..c44f830b6c7 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -30,6 +30,7 @@ #include <linux/stringify.h> #include <linux/kallsyms.h> #include <linux/delay.h> +#include <linux/hardirq.h> #include <asm/ptrace.h> #include <asm/timex.h> diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c index 33f366be323..bdd860d93f7 100644 --- a/arch/xtensa/mm/fault.c +++ b/arch/xtensa/mm/fault.c @@ -14,6 +14,7 @@ #include <linux/mm.h> #include <linux/module.h> +#include <linux/hardirq.h> #include <asm/mmu_context.h> #include <asm/cacheflush.h> #include <asm/hardirq.h> diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c index efed8897bef..25d46c84eb0 100644 --- a/arch/xtensa/platforms/iss/console.c +++ b/arch/xtensa/platforms/iss/console.c @@ -140,16 +140,14 @@ static void rs_poll(unsigned long priv) } -static void rs_put_char(struct tty_struct *tty, unsigned char ch) +static int rs_put_char(struct tty_struct *tty, unsigned char ch) { char buf[2]; - if (!tty) - return; - buf[0] = ch; buf[1] = '\0'; /* Is this NULL necessary? */ __simc (SYS_write, 1, (unsigned long) buf, 1, 0, 0); + return 1; } static void rs_flush_chars(struct tty_struct *tty) |