diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/blackfin/include/asm/dma.h | 2 | ||||
-rw-r--r-- | arch/blackfin/kernel/bfin_dma_5xx.c | 81 | ||||
-rw-r--r-- | arch/blackfin/kernel/setup.c | 51 |
3 files changed, 111 insertions, 23 deletions
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index e4f7b8043f0..46c56185417 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -253,5 +253,7 @@ static inline void clear_dma_irqstat(unsigned int channel) void *dma_memcpy(void *dest, const void *src, size_t count); void *safe_dma_memcpy(void *dest, const void *src, size_t count); void blackfin_dma_early_init(void); +void early_dma_memcpy(void *dest, const void *src, size_t count); +void early_dma_memcpy_done(void); #endif diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 8531693fb48..704419e4da2 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -232,6 +232,87 @@ void blackfin_dma_resume(void) void __init blackfin_dma_early_init(void) { bfin_write_MDMA_S0_CONFIG(0); + bfin_write_MDMA_S1_CONFIG(0); +} + +void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size) +{ + unsigned long dst = (unsigned long)pdst; + unsigned long src = (unsigned long)psrc; + struct dma_register *dst_ch, *src_ch; + + /* We assume that everything is 4 byte aligned, so include + * a basic sanity check + */ + BUG_ON(dst % 4); + BUG_ON(src % 4); + BUG_ON(size % 4); + + /* Force a sync in case a previous config reset on this channel + * occurred. This is needed so subsequent writes to DMA registers + * are not spuriously lost/corrupted. + */ + __builtin_bfin_ssync(); + + src_ch = 0; + /* Find an avalible memDMA channel */ + while (1) { + if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) { + dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR; + src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR; + } else { + dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR; + src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR; + } + + if (!bfin_read16(&src_ch->cfg)) { + break; + } else { + if (bfin_read16(&src_ch->irq_status) & DMA_DONE) + bfin_write16(&src_ch->cfg, 0); + } + + } + + /* Destination */ + bfin_write32(&dst_ch->start_addr, dst); + bfin_write16(&dst_ch->x_count, size >> 2); + bfin_write16(&dst_ch->x_modify, 1 << 2); + bfin_write16(&dst_ch->irq_status, DMA_DONE | DMA_ERR); + + /* Source */ + bfin_write32(&src_ch->start_addr, src); + bfin_write16(&src_ch->x_count, size >> 2); + bfin_write16(&src_ch->x_modify, 1 << 2); + bfin_write16(&src_ch->irq_status, DMA_DONE | DMA_ERR); + + /* Enable */ + bfin_write16(&src_ch->cfg, DMAEN | WDSIZE_32); + bfin_write16(&dst_ch->cfg, WNR | DI_EN | DMAEN | WDSIZE_32); + + /* Since we are atomic now, don't use the workaround ssync */ + __builtin_bfin_ssync(); +} + +void __init early_dma_memcpy_done(void) +{ + while ((bfin_read_MDMA_S0_CONFIG() && !(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) || + (bfin_read_MDMA_S1_CONFIG() && !(bfin_read_MDMA_D1_IRQ_STATUS() & DMA_DONE))) + continue; + + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + bfin_write_MDMA_D1_IRQ_STATUS(DMA_DONE | DMA_ERR); + /* + * Now that DMA is done, we would normally flush cache, but + * i/d cache isn't running this early, so we don't bother, + * and just clear out the DMA channel for next time + */ + bfin_write_MDMA_S0_CONFIG(0); + bfin_write_MDMA_S1_CONFIG(0); + bfin_write_MDMA_D0_CONFIG(0); + bfin_write_MDMA_D1_CONFIG(0); + + __builtin_bfin_ssync(); } /** diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index a58687bdee6..0838eafed17 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -150,40 +150,45 @@ void __init bfin_relocate_l1_mem(void) unsigned long l1_data_b_length; unsigned long l2_length; + /* + * due to the ALIGN(4) in the arch/blackfin/kernel/vmlinux.lds.S + * we know that everything about l1 text/data is nice and aligned, + * so copy by 4 byte chunks, and don't worry about overlapping + * src/dest. + * + * We can't use the dma_memcpy functions, since they can call + * scheduler functions which might be in L1 :( and core writes + * into L1 instruction cause bad access errors, so we are stuck, + * we are required to use DMA, but can't use the common dma + * functions. We can't use memcpy either - since that might be + * going to be in the relocated L1 + */ + blackfin_dma_early_init(); + /* if necessary, copy _stext_l1 to _etext_l1 to L1 instruction SRAM */ l1_code_length = _etext_l1 - _stext_l1; - if (l1_code_length > L1_CODE_LENGTH) - panic("L1 Instruction SRAM Overflow\n"); - /* cannot complain as printk is not available as yet. - * But we can continue booting and complain later! - */ - - /* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */ - dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length); + if (l1_code_length) + early_dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length); + /* if necessary, copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */ l1_data_a_length = _sbss_l1 - _sdata_l1; - if (l1_data_a_length > L1_DATA_A_LENGTH) - panic("L1 Data SRAM Bank A Overflow\n"); - - /* Copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */ - dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length); + if (l1_data_a_length) + early_dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length); + /* if necessary, copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */ l1_data_b_length = _sbss_b_l1 - _sdata_b_l1; - if (l1_data_b_length > L1_DATA_B_LENGTH) - panic("L1 Data SRAM Bank B Overflow\n"); - - /* Copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */ - dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + + if (l1_data_b_length) + early_dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + l1_data_a_length, l1_data_b_length); + early_dma_memcpy_done(); + + /* if necessary, copy _stext_l2 to _edata_l2 to L2 SRAM */ if (L2_LENGTH != 0) { l2_length = _sbss_l2 - _stext_l2; - if (l2_length > L2_LENGTH) - panic("L2 SRAM Overflow\n"); - - /* Copy _stext_l2 to _edata_l2 to L2 SRAM */ - dma_memcpy(_stext_l2, _l2_lma_start, l2_length); + if (l2_length) + memcpy(_stext_l2, _l2_lma_start, l2_length); } } |