aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-omap2/clock34xx.c35
-rw-r--r--arch/arm/mach-omap2/pm-debug.c4
-rw-r--r--arch/arm/mach-omap2/pm34xx.c187
-rw-r--r--arch/arm/mach-omap2/powerdomain.c39
-rw-r--r--arch/arm/plat-omap/include/mach/cpu.h37
-rw-r--r--arch/arm/plat-omap/include/mach/powerdomain.h2
-rw-r--r--arch/arm/plat-omap/iovmm.c9
-rw-r--r--arch/arm/plat-omap/sram.c3
-rw-r--r--arch/parisc/Kconfig1
-rw-r--r--arch/parisc/include/asm/fixmap.h4
-rw-r--r--arch/parisc/include/asm/hardirq.h20
-rw-r--r--arch/parisc/include/asm/ptrace.h5
-rw-r--r--arch/parisc/include/asm/syscall.h40
-rw-r--r--arch/parisc/include/asm/thread_info.h14
-rw-r--r--arch/parisc/kernel/asm-offsets.c4
-rw-r--r--arch/parisc/kernel/entry.S21
-rw-r--r--arch/parisc/kernel/irq.c5
-rw-r--r--arch/parisc/kernel/module.c2
-rw-r--r--arch/parisc/kernel/ptrace.c42
-rw-r--r--arch/parisc/kernel/signal.c5
-rw-r--r--arch/parisc/kernel/syscall.S22
-rw-r--r--arch/parisc/kernel/vmlinux.lds.S10
-rw-r--r--arch/parisc/mm/init.c11
23 files changed, 319 insertions, 203 deletions
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index fafcd32e690..489556eecbd 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -338,6 +338,13 @@ static struct omap_clk omap34xx_clks[] = {
*/
#define SDRC_MPURATE_LOOPS 96
+/*
+ * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define DPLL5_FREQ_FOR_USBHOST 120000000
+
/**
* omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
* @clk: struct clk * being enabled
@@ -1056,6 +1063,28 @@ void omap2_clk_prepare_for_reboot(void)
#endif
}
+static void omap3_clk_lock_dpll5(void)
+{
+ struct clk *dpll5_clk;
+ struct clk *dpll5_m2_clk;
+
+ dpll5_clk = clk_get(NULL, "dpll5_ck");
+ clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+ clk_enable(dpll5_clk);
+
+ /* Enable autoidle to allow it to enter low power bypass */
+ omap3_dpll_allow_idle(dpll5_clk);
+
+ /* Program dpll5_m2_clk divider for no division */
+ dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
+ clk_enable(dpll5_m2_clk);
+ clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+
+ clk_disable(dpll5_m2_clk);
+ clk_disable(dpll5_clk);
+ return;
+}
+
/* REVISIT: Move this init stuff out into clock.c */
/*
@@ -1148,6 +1177,12 @@ int __init omap2_clk_init(void)
*/
clk_enable_init_clocks();
+ /*
+ * Lock DPLL5 and put it in autoidle.
+ */
+ if (omap_rev() >= OMAP3430_REV_ES2_0)
+ omap3_clk_lock_dpll5();
+
/* Avoid sleeping during omap2_clk_prepare_for_reboot() */
/* REVISIT: not yet ready for 343x */
#if 0
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 1b4c1600f8d..2fc4d6abbd0 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -541,7 +541,7 @@ static int __init pm_dbg_init(void)
printk(KERN_ERR "%s: only OMAP3 supported\n", __func__);
return -ENODEV;
}
-
+
d = debugfs_create_dir("pm_debug", NULL);
if (IS_ERR(d))
return PTR_ERR(d);
@@ -551,7 +551,7 @@ static int __init pm_dbg_init(void)
(void) debugfs_create_file("time", S_IRUGO,
d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
- pwrdm_for_each(pwrdms_setup, (void *)d);
+ pwrdm_for_each_nolock(pwrdms_setup, (void *)d);
pm_dbg_dir = debugfs_create_dir("registers", d);
if (IS_ERR(pm_dbg_dir))
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 0ff5a6c53aa..378c2f61835 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -51,97 +51,112 @@ static void (*_omap_sram_idle)(u32 *addr, int save_state);
static struct powerdomain *mpu_pwrdm;
-/* PRCM Interrupt Handler for wakeups */
-static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+/*
+ * PRCM Interrupt Handler Helper Function
+ *
+ * The purpose of this function is to clear any wake-up events latched
+ * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
+ * may occur whilst attempting to clear a PM_WKST_x register and thus
+ * set another bit in this register. A while loop is used to ensure
+ * that any peripheral wake-up events occurring while attempting to
+ * clear the PM_WKST_x are detected and cleared.
+ */
+static int prcm_clear_mod_irqs(s16 module, u8 regs)
{
- u32 wkst, irqstatus_mpu;
- u32 fclk, iclk;
-
- /* WKUP */
- wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
+ u32 wkst, fclk, iclk, clken;
+ u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
+ u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
+ u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
+ u16 grpsel_off = (regs == 3) ?
+ OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
+ int c = 0;
+
+ wkst = prm_read_mod_reg(module, wkst_off);
+ wkst &= prm_read_mod_reg(module, grpsel_off);
if (wkst) {
- iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
- fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
- cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
- cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
- prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
- while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
- cpu_relax();
- cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
- cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
+ iclk = cm_read_mod_reg(module, iclk_off);
+ fclk = cm_read_mod_reg(module, fclk_off);
+ while (wkst) {
+ clken = wkst;
+ cm_set_mod_reg_bits(clken, module, iclk_off);
+ /*
+ * For USBHOST, we don't know whether HOST1 or
+ * HOST2 woke us up, so enable both f-clocks
+ */
+ if (module == OMAP3430ES2_USBHOST_MOD)
+ clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
+ cm_set_mod_reg_bits(clken, module, fclk_off);
+ prm_write_mod_reg(wkst, module, wkst_off);
+ wkst = prm_read_mod_reg(module, wkst_off);
+ c++;
+ }
+ cm_write_mod_reg(iclk, module, iclk_off);
+ cm_write_mod_reg(fclk, module, fclk_off);
}
- /* CORE */
- wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
- if (wkst) {
- iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
- fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
- cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
- cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
- prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
- while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
- cpu_relax();
- cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
- cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
- }
- wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
- if (wkst) {
- iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
- fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
- cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
- cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
- prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
- while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
- cpu_relax();
- cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
- cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
- }
+ return c;
+}
- /* PER */
- wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
- if (wkst) {
- iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
- fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
- cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
- cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
- prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
- while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
- cpu_relax();
- cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
- cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
- }
+static int _prcm_int_handle_wakeup(void)
+{
+ int c;
+ c = prcm_clear_mod_irqs(WKUP_MOD, 1);
+ c += prcm_clear_mod_irqs(CORE_MOD, 1);
+ c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1);
if (omap_rev() > OMAP3430_REV_ES1_0) {
- /* USBHOST */
- wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
- if (wkst) {
- iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
- CM_ICLKEN);
- fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
- CM_FCLKEN);
- cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
- CM_ICLKEN);
- cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
- CM_FCLKEN);
- prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
- PM_WKST);
- while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
- PM_WKST))
- cpu_relax();
- cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
- CM_ICLKEN);
- cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
- CM_FCLKEN);
- }
+ c += prcm_clear_mod_irqs(CORE_MOD, 3);
+ c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1);
}
- irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
- OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
- OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ return c;
+}
+
+/*
+ * PRCM Interrupt Handler
+ *
+ * The PRM_IRQSTATUS_MPU register indicates if there are any pending
+ * interrupts from the PRCM for the MPU. These bits must be cleared in
+ * order to clear the PRCM interrupt. The PRCM interrupt handler is
+ * implemented to simply clear the PRM_IRQSTATUS_MPU in order to clear
+ * the PRCM interrupt. Please note that bit 0 of the PRM_IRQSTATUS_MPU
+ * register indicates that a wake-up event is pending for the MPU and
+ * this bit can only be cleared if the all the wake-up events latched
+ * in the various PM_WKST_x registers have been cleared. The interrupt
+ * handler is implemented using a do-while loop so that if a wake-up
+ * event occurred during the processing of the prcm interrupt handler
+ * (setting a bit in the corresponding PM_WKST_x register and thus
+ * preventing us from clearing bit 0 of the PRM_IRQSTATUS_MPU register)
+ * this would be handled.
+ */
+static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+{
+ u32 irqstatus_mpu;
+ int c = 0;
+
+ do {
+ irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ if (irqstatus_mpu & (OMAP3430_WKUP_ST | OMAP3430_IO_ST)) {
+ c = _prcm_int_handle_wakeup();
+
+ /*
+ * Is the MPU PRCM interrupt handler racing with the
+ * IVA2 PRCM interrupt handler ?
+ */
+ WARN(c == 0, "prcm: WARNING: PRCM indicated MPU wakeup "
+ "but no wakeup sources are marked\n");
+ } else {
+ /* XXX we need to expand our PRCM interrupt handler */
+ WARN(1, "prcm: WARNING: PRCM interrupt received, but "
+ "no code to handle it (%08x)\n", irqstatus_mpu);
+ }
+
+ prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
- cpu_relax();
+ } while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET));
return IRQ_HANDLED;
}
@@ -624,6 +639,16 @@ static void __init prcm_setup_regs(void)
prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ /* Enable GPIO wakeups in PER */
+ prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
+ OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
+ OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN);
+ /* and allow them to wake up MPU */
+ prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
+ OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
+ OMAP3430_GRPSEL_GPIO6,
+ OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
+
/* Don't attach IVA interrupts */
prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 2594cbff394..f00289abd30 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -273,35 +273,50 @@ struct powerdomain *pwrdm_lookup(const char *name)
}
/**
- * pwrdm_for_each - call function on each registered clockdomain
+ * pwrdm_for_each_nolock - call function on each registered clockdomain
* @fn: callback function *
*
* Call the supplied function for each registered powerdomain. The
* callback function can return anything but 0 to bail out early from
- * the iterator. The callback function is called with the pwrdm_rwlock
- * held for reading, so no powerdomain structure manipulation
- * functions should be called from the callback, although hardware
- * powerdomain control functions are fine. Returns the last return
- * value of the callback function, which should be 0 for success or
- * anything else to indicate failure; or -EINVAL if the function
- * pointer is null.
+ * the iterator. Returns the last return value of the callback function, which
+ * should be 0 for success or anything else to indicate failure; or -EINVAL if
+ * the function pointer is null.
*/
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
- void *user)
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user)
{
struct powerdomain *temp_pwrdm;
- unsigned long flags;
int ret = 0;
if (!fn)
return -EINVAL;
- read_lock_irqsave(&pwrdm_rwlock, flags);
list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
ret = (*fn)(temp_pwrdm, user);
if (ret)
break;
}
+
+ return ret;
+}
+
+/**
+ * pwrdm_for_each - call function on each registered clockdomain
+ * @fn: callback function *
+ *
+ * This function is the same as 'pwrdm_for_each_nolock()', but keeps the
+ * &pwrdm_rwlock locked for reading, so no powerdomain structure manipulation
+ * functions should be called from the callback, although hardware powerdomain
+ * control functions are fine.
+ */
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user)
+{
+ unsigned long flags;
+ int ret;
+
+ read_lock_irqsave(&pwrdm_rwlock, flags);
+ ret = pwrdm_for_each_nolock(fn, user);
read_unlock_irqrestore(&pwrdm_rwlock, flags);
return ret;
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 11e73d9e892..f129efb3075 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -303,32 +303,21 @@ IS_OMAP_TYPE(3430, 0x3430)
#define cpu_is_omap2430() 0
#define cpu_is_omap3430() 0
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap730
-# define cpu_is_omap730() is_omap730()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-# undef cpu_is_omap850
-# define cpu_is_omap850() is_omap850()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap730
-# define cpu_is_omap730() 1
-# endif
-#endif
-#else
-# if defined(CONFIG_ARCH_OMAP850)
-# undef cpu_is_omap850
-# define cpu_is_omap850() 1
-# endif
-#endif
-
/*
* Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 330 vs. 1510 and 1611B/5912 vs. 1710.
+ * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710.
*/
+
+#if defined(CONFIG_ARCH_OMAP730)
+# undef cpu_is_omap730
+# define cpu_is_omap730() is_omap730()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap850
+# define cpu_is_omap850() is_omap850()
+#endif
+
#if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap310
# undef cpu_is_omap1510
@@ -433,3 +422,5 @@ IS_OMAP_TYPE(3430, 0x3430)
int omap_chip_is(struct omap_chip_id oci);
void omap2_check_revision(void);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index 6271d8556a4..fa6461423bd 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -135,6 +135,8 @@ struct powerdomain *pwrdm_lookup(const char *name);
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
void *user);
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user);
int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 57f7122a091..dc3fac3dd0e 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -47,7 +47,7 @@
* 'va': mpu virtual address
*
* 'c': contiguous memory area
- * 'd': dicontiguous memory area
+ * 'd': discontiguous memory area
* 'a': anonymous memory allocation
* '()': optional feature
*
@@ -363,8 +363,9 @@ void *da_to_va(struct iommu *obj, u32 da)
goto out;
}
va = area->va;
- mutex_unlock(&obj->mmap_lock);
out:
+ mutex_unlock(&obj->mmap_lock);
+
return va;
}
EXPORT_SYMBOL_GPL(da_to_va);
@@ -398,7 +399,7 @@ static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
{
/*
* Actually this is not necessary at all, just exists for
- * consistency of the code readibility.
+ * consistency of the code readability.
*/
BUG_ON(!sgt);
}
@@ -434,7 +435,7 @@ static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
{
/*
* Actually this is not necessary at all, just exists for
- * consistency of the code readibility
+ * consistency of the code readability
*/
BUG_ON(!sgt);
}
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 925f64711c3..75d1f26e5b1 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -270,7 +270,8 @@ void * omap_sram_push(void * start, unsigned long size)
omap_sram_ceil -= size;
omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
memcpy((void *)omap_sram_ceil, start, size);
- flush_icache_range((unsigned long)start, (unsigned long)(start + size));
+ flush_icache_range((unsigned long)omap_sram_ceil,
+ (unsigned long)(omap_sram_ceil + size));
return (void *)omap_sram_ceil;
}
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index f388dc68f60..524d9352f17 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -18,6 +18,7 @@ config PARISC
select BUG
select HAVE_PERF_EVENTS
select GENERIC_ATOMIC64 if !64BIT
+ select HAVE_ARCH_TRACEHOOK
help
The PA-RISC microprocessor is designed by Hewlett-Packard and used
in many of their workstations & servers (HP9000 700 and 800 series,
diff --git a/arch/parisc/include/asm/fixmap.h b/arch/parisc/include/asm/fixmap.h
index de3fe3a1822..6fec4d4a1a1 100644
--- a/arch/parisc/include/asm/fixmap.h
+++ b/arch/parisc/include/asm/fixmap.h
@@ -21,9 +21,9 @@
#define KERNEL_MAP_END (TMPALIAS_MAP_START)
#ifndef __ASSEMBLY__
-extern void *vmalloc_start;
+extern void *parisc_vmalloc_start;
#define PCXL_DMA_MAP_SIZE (8*1024*1024)
-#define VMALLOC_START ((unsigned long)vmalloc_start)
+#define VMALLOC_START ((unsigned long)parisc_vmalloc_start)
#define VMALLOC_END (KERNEL_MAP_END)
#endif /*__ASSEMBLY__*/
diff --git a/arch/parisc/include/asm/hardirq.h b/arch/parisc/include/asm/hardirq.h
index ce93133d511..0d68184a76c 100644
--- a/arch/parisc/include/asm/hardirq.h
+++ b/arch/parisc/include/asm/hardirq.h
@@ -1,29 +1,11 @@
/* hardirq.h: PA-RISC hard IRQ support.
*
* Copyright (C) 2001 Matthew Wilcox <matthew@wil.cx>
- *
- * The locking is really quite interesting. There's a cpu-local
- * count of how many interrupts are being handled, and a global
- * lock. An interrupt can only be serviced if the global lock
- * is free. You can't be sure no more interrupts are being
- * serviced until you've acquired the lock and then checked
- * all the per-cpu interrupt counts are all zero. It's a specialised
- * br_lock, and that's exactly how Sparc does it. We don't because
- * it's more locking for us. This way is lock-free in the interrupt path.
*/
#ifndef _PARISC_HARDIRQ_H
#define _PARISC_HARDIRQ_H
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-typedef struct {
- unsigned long __softirq_pending; /* set_bit is used on this */
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-void ack_bad_irq(unsigned int irq);
+#include <asm-generic/hardirq.h>
#endif /* _PARISC_HARDIRQ_H */
diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h
index 302f68dc889..aead40b16dd 100644
--- a/arch/parisc/include/asm/ptrace.h
+++ b/arch/parisc/include/asm/ptrace.h
@@ -59,8 +59,11 @@ void user_enable_block_step(struct task_struct *task);
#define user_mode(regs) (((regs)->iaoq[0] & 3) ? 1 : 0)
#define user_space(regs) (((regs)->iasq[1] != 0) ? 1 : 0)
#define instruction_pointer(regs) ((regs)->iaoq[0] & ~3)
+#define user_stack_pointer(regs) ((regs)->gr[30])
unsigned long profile_pc(struct pt_regs *);
extern void show_regs(struct pt_regs *);
-#endif
+
+
+#endif /* __KERNEL__ */
#endif
diff --git a/arch/parisc/include/asm/syscall.h b/arch/parisc/include/asm/syscall.h
new file mode 100644
index 00000000000..8bdfd2c8c39
--- /dev/null
+++ b/arch/parisc/include/asm/syscall.h
@@ -0,0 +1,40 @@
+/* syscall.h */
+
+#ifndef _ASM_PARISC_SYSCALL_H_
+#define _ASM_PARISC_SYSCALL_H_
+
+#include <linux/err.h>
+#include <asm/ptrace.h>
+
+static inline long syscall_get_nr(struct task_struct *tsk,
+ struct pt_regs *regs)
+{
+ return regs->gr[20];
+}
+
+static inline void syscall_get_arguments(struct task_struct *tsk,
+ struct pt_regs *regs, unsigned int i,
+ unsigned int n, unsigned long *args)
+{
+ BUG_ON(i);
+
+ switch (n) {
+ case 6:
+ args[5] = regs->gr[21];
+ case 5:
+ args[4] = regs->gr[22];
+ case 4:
+ args[3] = regs->gr[23];
+ case 3:
+ args[2] = regs->gr[24];
+ case 2:
+ args[1] = regs->gr[25];
+ case 1:
+ args[0] = regs->gr[26];
+ break;
+ default:
+ BUG();
+ }
+}
+
+#endif /*_ASM_PARISC_SYSCALL_H_*/
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index ac775a76bff..7ecc1039cfe 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -32,6 +32,11 @@ struct thread_info {
#define init_thread_info (init_thread_union.thread_info)
#define init_stack (init_thread_union.stack)
+/* how to get the thread information struct from C */
+#define current_thread_info() ((struct thread_info *)mfctl(30))
+
+#endif /* !__ASSEMBLY */
+
/* thread information allocation */
#define THREAD_SIZE_ORDER 2
@@ -40,11 +45,6 @@ struct thread_info {
#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
#define THREAD_SHIFT (PAGE_SHIFT + THREAD_SIZE_ORDER)
-/* how to get the thread information struct from C */
-#define current_thread_info() ((struct thread_info *)mfctl(30))
-
-#endif /* !__ASSEMBLY */
-
#define PREEMPT_ACTIVE_BIT 28
#define PREEMPT_ACTIVE (1 << PREEMPT_ACTIVE_BIT)
@@ -60,6 +60,8 @@ struct thread_info {
#define TIF_RESTORE_SIGMASK 6 /* restore saved signal mask */
#define TIF_FREEZE 7 /* is freezing for suspend */
#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */
+#define TIF_SINGLESTEP 9 /* single stepping? */
+#define TIF_BLOCKSTEP 10 /* branch stepping? */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
@@ -69,6 +71,8 @@ struct thread_info {
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
#define _TIF_FREEZE (1 << TIF_FREEZE)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
+#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
+#define _TIF_BLOCKSTEP (1 << TIF_BLOCKSTEP)
#define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | \
_TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK)
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index 699cf8ef211..fcd3c707bf1 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -270,8 +270,8 @@ int main(void)
DEFINE(DTLB_OFF_COUNT, offsetof(struct pdc_cache_info, dt_off_count));
DEFINE(DTLB_LOOP, offsetof(struct pdc_cache_info, dt_loop));
BLANK();
- DEFINE(PA_BLOCKSTEP_BIT, 31-PT_BLOCKSTEP_BIT);
- DEFINE(PA_SINGLESTEP_BIT, 31-PT_SINGLESTEP_BIT);
+ DEFINE(TIF_BLOCKSTEP_PA_BIT, 31-TIF_BLOCKSTEP);
+ DEFINE(TIF_SINGLESTEP_PA_BIT, 31-TIF_SINGLESTEP);
BLANK();
DEFINE(ASM_PMD_SHIFT, PMD_SHIFT);
DEFINE(ASM_PGDIR_SHIFT, PGDIR_SHIFT);
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 8c4712b74dc..3a44f7f704f 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -2047,12 +2047,13 @@ syscall_do_signal:
b,n syscall_check_sig
syscall_restore:
- /* Are we being ptraced? */
LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1
- ldw TASK_PTRACE(%r1), %r19
- bb,< %r19,31,syscall_restore_rfi
- nop
+ /* Are we being ptraced? */
+ ldw TASK_FLAGS(%r1),%r19
+ ldi (_TIF_SINGLESTEP|_TIF_BLOCKSTEP),%r2
+ and,COND(=) %r19,%r2,%r0
+ b,n syscall_restore_rfi
ldo TASK_PT_FR31(%r1),%r19 /* reload fpregs */
rest_fp %r19
@@ -2113,16 +2114,16 @@ syscall_restore_rfi:
ldi 0x0b,%r20 /* Create new PSW */
depi -1,13,1,%r20 /* C, Q, D, and I bits */
- /* The values of PA_SINGLESTEP_BIT and PA_BLOCKSTEP_BIT are
- * set in include/linux/ptrace.h and converted to PA bitmap
+ /* The values of SINGLESTEP_BIT and BLOCKSTEP_BIT are
+ * set in thread_info.h and converted to PA bitmap
* numbers in asm-offsets.c */
- /* if ((%r19.PA_SINGLESTEP_BIT)) { %r20.27=1} */
- extru,= %r19,PA_SINGLESTEP_BIT,1,%r0
+ /* if ((%r19.SINGLESTEP_BIT)) { %r20.27=1} */
+ extru,= %r19,TIF_SINGLESTEP_PA_BIT,1,%r0
depi -1,27,1,%r20 /* R bit */
- /* if ((%r19.PA_BLOCKSTEP_BIT)) { %r20.7=1} */
- extru,= %r19,PA_BLOCKSTEP_BIT,1,%r0
+ /* if ((%r19.BLOCKSTEP_BIT)) { %r20.7=1} */
+ extru,= %r19,TIF_BLOCKSTEP_PA_BIT,1,%r0
depi -1,7,1,%r20 /* T bit */
STREG %r20,TASK_PT_PSW(%r1)
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 330f536a932..2e7610cb33d 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -423,8 +423,3 @@ void __init init_IRQ(void)
set_eiem(cpu_eiem); /* EIEM : enable all external intr */
}
-
-void ack_bad_irq(unsigned int irq)
-{
- printk(KERN_WARNING "unexpected IRQ %d\n", irq);
-}
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index 61ee0eec4e6..212074653df 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -893,7 +893,7 @@ int module_finalize(const Elf_Ehdr *hdr,
* ourselves */
for (i = 1; i < hdr->e_shnum; i++) {
if(sechdrs[i].sh_type == SHT_SYMTAB
- && (sechdrs[i].sh_type & SHF_ALLOC)) {
+ && (sechdrs[i].sh_flags & SHF_ALLOC)) {
int strindex = sechdrs[i].sh_link;
/* FIXME: AWFUL HACK
* The cast is to drop the const from
diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c
index 927db3668b6..c4f49e45129 100644
--- a/arch/parisc/kernel/ptrace.c
+++ b/arch/parisc/kernel/ptrace.c
@@ -13,6 +13,7 @@
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
+#include <linux/tracehook.h>
#include <linux/user.h>
#include <linux/personality.h>
#include <linux/security.h>
@@ -35,7 +36,8 @@
*/
void ptrace_disable(struct task_struct *task)
{
- task->ptrace &= ~(PT_SINGLESTEP|PT_BLOCKSTEP);
+ clear_tsk_thread_flag(task, TIF_SINGLESTEP);
+ clear_tsk_thread_flag(task, TIF_BLOCKSTEP);
/* make sure the trap bits are not set */
pa_psw(task)->r = 0;
@@ -55,8 +57,8 @@ void user_disable_single_step(struct task_struct *task)
void user_enable_single_step(struct task_struct *task)
{
- task->ptrace &= ~PT_BLOCKSTEP;
- task->ptrace |= PT_SINGLESTEP;
+ clear_tsk_thread_flag(task, TIF_BLOCKSTEP);
+ set_tsk_thread_flag(task, TIF_SINGLESTEP);
if (pa_psw(task)->n) {
struct siginfo si;
@@ -98,8 +100,8 @@ void user_enable_single_step(struct task_struct *task)
void user_enable_block_step(struct task_struct *task)
{
- task->ptrace &= ~PT_SINGLESTEP;
- task->ptrace |= PT_BLOCKSTEP;
+ clear_tsk_thread_flag(task, TIF_SINGLESTEP);
+ set_tsk_thread_flag(task, TIF_BLOCKSTEP);
/* Enable taken branch trap. */
pa_psw(task)->r = 0;
@@ -263,22 +265,20 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
}
#endif
+long do_syscall_trace_enter(struct pt_regs *regs)
+{
+ if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+ tracehook_report_syscall_entry(regs))
+ return -1L;
+
+ return regs->gr[20];
+}
-void syscall_trace(void)
+void do_syscall_trace_exit(struct pt_regs *regs)
{
- if (!test_thread_flag(TIF_SYSCALL_TRACE))
- return;
- if (!(current->ptrace & PT_PTRACED))
- return;
- ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
- ? 0x80 : 0));
- /*
- * this isn't the same as continuing with a signal, but it will do
- * for normal use. strace only continues with a signal if the
- * stopping signal is not SIGTRAP. -brl
- */
- if (current->exit_code) {
- send_sig(current->exit_code, current, 1);
- current->exit_code = 0;
- }
+ int stepping = test_thread_flag(TIF_SINGLESTEP) ||
+ test_thread_flag(TIF_BLOCKSTEP);
+
+ if (stepping || test_thread_flag(TIF_SYSCALL_TRACE))
+ tracehook_report_syscall_exit(regs, stepping);
}
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 8eb3c63c407..e8467e4aa8d 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -21,6 +21,7 @@
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/ptrace.h>
+#include <linux/tracehook.h>
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/compat.h>
@@ -34,7 +35,6 @@
#include <asm/asm-offsets.h>
#ifdef CONFIG_COMPAT
-#include <linux/compat.h>
#include "signal32.h"
#endif
@@ -468,6 +468,9 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
sigaddset(&current->blocked,sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
+
+ tracehook_signal_handler(sig, info, ka, regs, 0);
+
return 1;
}
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 59fc1a43ec3..f5f96021caa 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -288,18 +288,23 @@ tracesys:
STREG %r18,PT_GR18(%r2)
/* Finished saving things for the debugger */
- ldil L%syscall_trace,%r1
+ copy %r2,%r26
+ ldil L%do_syscall_trace_enter,%r1
ldil L%tracesys_next,%r2
- be R%syscall_trace(%sr7,%r1)
+ be R%do_syscall_trace_enter(%sr7,%r1)
ldo R%tracesys_next(%r2),%r2
-tracesys_next:
+tracesys_next:
+ /* do_syscall_trace_enter either returned the syscallno, or -1L,
+ * so we skip restoring the PT_GR20 below, since we pulled it from
+ * task->thread.regs.gr[20] above.
+ */
+ copy %ret0,%r20
ldil L%sys_call_table,%r1
ldo R%sys_call_table(%r1), %r19
ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */
LDREG TI_TASK(%r1), %r1
- LDREG TASK_PT_GR20(%r1), %r20
LDREG TASK_PT_GR26(%r1), %r26 /* Restore the users args */
LDREG TASK_PT_GR25(%r1), %r25
LDREG TASK_PT_GR24(%r1), %r24
@@ -336,7 +341,8 @@ tracesys_exit:
#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
- bl syscall_trace, %r2
+ ldo TASK_REGS(%r1),%r26
+ bl do_syscall_trace_exit,%r2
STREG %r28,TASK_PT_GR28(%r1) /* save return value now */
ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */
LDREG TI_TASK(%r1), %r1
@@ -353,12 +359,12 @@ tracesys_exit:
tracesys_sigexit:
ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */
- LDREG 0(%r1), %r1
+ LDREG TI_TASK(%r1), %r1
#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
- bl syscall_trace, %r2
- nop
+ bl do_syscall_trace_exit,%r2
+ ldo TASK_REGS(%r1),%r26
ldil L%syscall_exit_rfi,%r1
be,n R%syscall_exit_rfi(%sr7,%r1)
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 775be2791bc..fda4baa059b 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -28,6 +28,7 @@
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
/* ld script to make hppa Linux kernel */
#ifndef CONFIG_64BIT
@@ -134,6 +135,15 @@ SECTIONS
__init_begin = .;
INIT_TEXT_SECTION(16384)
INIT_DATA_SECTION(16)
+ /* we have to discard exit text and such at runtime, not link time */
+ .exit.text :
+ {
+ EXIT_TEXT
+ }
+ .exit.data :
+ {
+ EXIT_DATA
+ }
PERCPU(PAGE_SIZE)
. = ALIGN(PAGE_SIZE);
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index d5aca31fddb..13b6e3e59b9 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -434,8 +434,8 @@ void mark_rodata_ro(void)
#define SET_MAP_OFFSET(x) ((void *)(((unsigned long)(x) + VM_MAP_OFFSET) \
& ~(VM_MAP_OFFSET-1)))
-void *vmalloc_start __read_mostly;
-EXPORT_SYMBOL(vmalloc_start);
+void *parisc_vmalloc_start __read_mostly;
+EXPORT_SYMBOL(parisc_vmalloc_start);
#ifdef CONFIG_PA11
unsigned long pcxl_dma_start __read_mostly;
@@ -496,13 +496,14 @@ void __init mem_init(void)
#ifdef CONFIG_PA11
if (hppa_dma_ops == &pcxl_dma_ops) {
pcxl_dma_start = (unsigned long)SET_MAP_OFFSET(MAP_START);
- vmalloc_start = SET_MAP_OFFSET(pcxl_dma_start + PCXL_DMA_MAP_SIZE);
+ parisc_vmalloc_start = SET_MAP_OFFSET(pcxl_dma_start
+ + PCXL_DMA_MAP_SIZE);
} else {
pcxl_dma_start = 0;
- vmalloc_start = SET_MAP_OFFSET(MAP_START);
+ parisc_vmalloc_start = SET_MAP_OFFSET(MAP_START);
}
#else
- vmalloc_start = SET_MAP_OFFSET(MAP_START);
+ parisc_vmalloc_start = SET_MAP_OFFSET(MAP_START);
#endif
printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n",
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-13 17:00:38 +0000