aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig50
-rw-r--r--arch/arm/Kconfig-nommu8
-rw-r--r--arch/arm/Makefile9
-rw-r--r--arch/arm/boot/compressed/Makefile4
-rw-r--r--arch/arm/boot/compressed/head.S22
-rw-r--r--arch/arm/boot/compressed/misc.c21
-rw-r--r--arch/arm/common/icst307.c4
-rw-r--r--arch/arm/common/icst525.c4
-rw-r--r--arch/arm/common/locomo.c61
-rw-r--r--arch/arm/common/sharpsl_pm.c4
-rw-r--r--arch/arm/configs/ep93xx_defconfig1
-rw-r--r--arch/arm/configs/iop32x_defconfig (renamed from arch/arm/configs/ep80219_defconfig)602
-rw-r--r--arch/arm/configs/iop33x_defconfig (renamed from arch/arm/configs/iq80332_defconfig)473
-rw-r--r--arch/arm/configs/iq31244_defconfig922
-rw-r--r--arch/arm/configs/iq80321_defconfig843
-rw-r--r--arch/arm/configs/iq80331_defconfig916
-rw-r--r--arch/arm/configs/s3c2410_defconfig46
-rw-r--r--arch/arm/kernel/apm.c33
-rw-r--r--arch/arm/kernel/debug.S35
-rw-r--r--arch/arm/kernel/entry-armv.S13
-rw-r--r--arch/arm/kernel/head-nommu.S12
-rw-r--r--arch/arm/kernel/module.c8
-rw-r--r--arch/arm/kernel/process.c22
-rw-r--r--arch/arm/kernel/time.c6
-rw-r--r--arch/arm/kernel/traps.c2
-rw-r--r--arch/arm/mach-at91rm9200/at91rm9200.c250
-rw-r--r--arch/arm/mach-at91rm9200/board-1arm.c20
-rw-r--r--arch/arm/mach-at91rm9200/board-carmeva.c21
-rw-r--r--arch/arm/mach-at91rm9200/board-csb337.c20
-rw-r--r--arch/arm/mach-at91rm9200/board-csb637.c20
-rw-r--r--arch/arm/mach-at91rm9200/board-dk.c45
-rw-r--r--arch/arm/mach-at91rm9200/board-eb9200.c20
-rw-r--r--arch/arm/mach-at91rm9200/board-ek.c20
-rw-r--r--arch/arm/mach-at91rm9200/board-kafa.c20
-rw-r--r--arch/arm/mach-at91rm9200/board-kb9202.c45
-rw-r--r--arch/arm/mach-at91rm9200/clock.c324
-rw-r--r--arch/arm/mach-at91rm9200/clock.h30
-rw-r--r--arch/arm/mach-at91rm9200/devices.c72
-rw-r--r--arch/arm/mach-at91rm9200/generic.h20
-rw-r--r--arch/arm/mach-at91rm9200/gpio.c89
-rw-r--r--arch/arm/mach-at91rm9200/irq.c6
-rw-r--r--arch/arm/mach-at91rm9200/pm.c14
-rw-r--r--arch/arm/mach-ep93xx/Kconfig6
-rw-r--r--arch/arm/mach-ep93xx/Makefile1
-rw-r--r--arch/arm/mach-ep93xx/edb9312.c63
-rw-r--r--arch/arm/mach-footbridge/dc21285.c27
-rw-r--r--arch/arm/mach-iop32x/Kconfig35
-rw-r--r--arch/arm/mach-iop32x/Makefile13
-rw-r--r--arch/arm/mach-iop32x/Makefile.boot3
-rw-r--r--arch/arm/mach-iop32x/glantank.c195
-rw-r--r--arch/arm/mach-iop32x/iq31244.c293
-rw-r--r--arch/arm/mach-iop32x/iq80321.c193
-rw-r--r--arch/arm/mach-iop32x/irq.c76
-rw-r--r--arch/arm/mach-iop32x/n2100.c251
-rw-r--r--arch/arm/mach-iop33x/Kconfig21
-rw-r--r--arch/arm/mach-iop33x/Makefile11
-rw-r--r--arch/arm/mach-iop33x/Makefile.boot3
-rw-r--r--arch/arm/mach-iop33x/iq80331.c148
-rw-r--r--arch/arm/mach-iop33x/iq80332.c148
-rw-r--r--arch/arm/mach-iop33x/irq.c127
-rw-r--r--arch/arm/mach-iop33x/uart.c105
-rw-r--r--arch/arm/mach-iop3xx/Kconfig66
-rw-r--r--arch/arm/mach-iop3xx/Makefile23
-rw-r--r--arch/arm/mach-iop3xx/Makefile.boot9
-rw-r--r--arch/arm/mach-iop3xx/common.c72
-rw-r--r--arch/arm/mach-iop3xx/iop321-irq.c97
-rw-r--r--arch/arm/mach-iop3xx/iop321-pci.c220
-rw-r--r--arch/arm/mach-iop3xx/iop321-setup.c173
-rw-r--r--arch/arm/mach-iop3xx/iop321-time.c108
-rw-r--r--arch/arm/mach-iop3xx/iop331-irq.c129
-rw-r--r--arch/arm/mach-iop3xx/iop331-pci.c222
-rw-r--r--arch/arm/mach-iop3xx/iop331-setup.c221
-rw-r--r--arch/arm/mach-iop3xx/iop331-time.c106
-rw-r--r--arch/arm/mach-iop3xx/iq31244-mm.c45
-rw-r--r--arch/arm/mach-iop3xx/iq31244-pci.c129
-rw-r--r--arch/arm/mach-iop3xx/iq80321-mm.c45
-rw-r--r--arch/arm/mach-iop3xx/iq80321-pci.c123
-rw-r--r--arch/arm/mach-iop3xx/iq80331-mm.c35
-rw-r--r--arch/arm/mach-iop3xx/iq80331-pci.c119
-rw-r--r--arch/arm/mach-iop3xx/iq80332-mm.c35
-rw-r--r--arch/arm/mach-iop3xx/iq80332-pci.c125
-rw-r--r--arch/arm/mach-ixp4xx/common.c38
-rw-r--r--arch/arm/mach-ixp4xx/nslu2-setup.c2
-rw-r--r--arch/arm/mach-omap1/clock.c107
-rw-r--r--arch/arm/mach-omap1/clock.h14
-rw-r--r--arch/arm/mach-omap1/mux.c11
-rw-r--r--arch/arm/mach-omap2/board-apollon.c7
-rw-r--r--arch/arm/mach-omap2/clock.c146
-rw-r--r--arch/arm/mach-omap2/clock.h20
-rw-r--r--arch/arm/mach-omap2/gpmc.c180
-rw-r--r--arch/arm/mach-omap2/irq.c12
-rw-r--r--arch/arm/mach-omap2/mux.c14
-rw-r--r--arch/arm/mach-omap2/prcm.c10
-rw-r--r--arch/arm/mach-s3c2410/Kconfig38
-rw-r--r--arch/arm/mach-s3c2410/Makefile16
-rw-r--r--arch/arm/mach-s3c2410/bast-irq.c4
-rw-r--r--arch/arm/mach-s3c2410/cpu.c9
-rw-r--r--arch/arm/mach-s3c2410/devs.h5
-rw-r--r--arch/arm/mach-s3c2410/dma.c241
-rw-r--r--arch/arm/mach-s3c2410/dma.h45
-rw-r--r--arch/arm/mach-s3c2410/gpio.c16
-rw-r--r--arch/arm/mach-s3c2410/irq.c165
-rw-r--r--arch/arm/mach-s3c2410/mach-amlm5900.c266
-rw-r--r--arch/arm/mach-s3c2410/mach-anubis.c6
-rw-r--r--arch/arm/mach-s3c2410/mach-smdk2440.c9
-rw-r--r--arch/arm/mach-s3c2410/mach-vstms.c168
-rw-r--r--arch/arm/mach-s3c2410/pm-simtec.c3
-rw-r--r--arch/arm/mach-s3c2410/pm.c72
-rw-r--r--arch/arm/mach-s3c2410/pm.h16
-rw-r--r--arch/arm/mach-s3c2410/s3c2410-dma.c158
-rw-r--r--arch/arm/mach-s3c2410/s3c2410-irq.c48
-rw-r--r--arch/arm/mach-s3c2410/s3c2410-pm.c120
-rw-r--r--arch/arm/mach-s3c2410/s3c2410-sleep.S68
-rw-r--r--arch/arm/mach-s3c2410/s3c2410.c11
-rw-r--r--arch/arm/mach-s3c2410/s3c2412-dma.c160
-rw-r--r--arch/arm/mach-s3c2410/s3c2412-irq.c3
-rw-r--r--arch/arm/mach-s3c2410/s3c2412-pm.c128
-rw-r--r--arch/arm/mach-s3c2410/s3c2412.c61
-rw-r--r--arch/arm/mach-s3c2410/s3c2440-dma.c164
-rw-r--r--arch/arm/mach-s3c2410/s3c2440-dsc.c5
-rw-r--r--arch/arm/mach-s3c2410/s3c2440-irq.c2
-rw-r--r--arch/arm/mach-s3c2410/s3c244x-irq.c9
-rw-r--r--arch/arm/mach-s3c2410/sleep.S54
-rw-r--r--arch/arm/mach-s3c2410/usb-simtec.c6
-rw-r--r--arch/arm/mach-sa1100/collie.c23
-rw-r--r--arch/arm/mach-versatile/pci.c1
-rw-r--r--arch/arm/mm/Kconfig154
-rw-r--r--arch/arm/mm/Makefile10
-rw-r--r--arch/arm/mm/abort-lv4t.S7
-rw-r--r--arch/arm/mm/abort-nommu.S19
-rw-r--r--arch/arm/mm/alignment.c2
-rw-r--r--arch/arm/mm/cache-v4.S10
-rw-r--r--arch/arm/mm/context.c45
-rw-r--r--arch/arm/mm/copypage-v4mc.c4
-rw-r--r--arch/arm/mm/copypage-v6.c4
-rw-r--r--arch/arm/mm/copypage-xscale.c4
-rw-r--r--arch/arm/mm/fault.c15
-rw-r--r--arch/arm/mm/fault.h5
-rw-r--r--arch/arm/mm/flush.c6
-rw-r--r--arch/arm/mm/init.c224
-rw-r--r--arch/arm/mm/mm-armv.c663
-rw-r--r--arch/arm/mm/mm.h22
-rw-r--r--arch/arm/mm/mmap.c22
-rw-r--r--arch/arm/mm/mmu.c768
-rw-r--r--arch/arm/mm/nommu.c43
-rw-r--r--arch/arm/mm/pgd.c101
-rw-r--r--arch/arm/mm/proc-arm740.S174
-rw-r--r--arch/arm/mm/proc-arm7tdmi.S249
-rw-r--r--arch/arm/mm/proc-arm940.S369
-rw-r--r--arch/arm/mm/proc-arm946.S424
-rw-r--r--arch/arm/mm/proc-arm9tdmi.S134
-rw-r--r--arch/arm/mm/proc-xscale.S58
-rw-r--r--arch/arm/oprofile/op_model_xscale.c10
-rw-r--r--arch/arm/plat-iop/Makefile8
-rw-r--r--arch/arm/plat-iop/gpio.c48
-rw-r--r--arch/arm/plat-iop/i2c.c81
-rw-r--r--arch/arm/plat-iop/pci.c247
-rw-r--r--arch/arm/plat-iop/setup.c38
-rw-r--r--arch/arm/plat-iop/time.c98
-rw-r--r--arch/arm/plat-omap/clock.c26
-rw-r--r--arch/arm/plat-omap/devices.c20
-rw-r--r--arch/arm/plat-omap/dma.c95
-rw-r--r--arch/arm/plat-omap/dmtimer.c76
-rw-r--r--arch/arm/plat-omap/gpio.c45
-rw-r--r--arch/arm/plat-omap/mcbsp.c9
-rw-r--r--arch/arm/plat-omap/pm.c670
-rw-r--r--arch/arm/plat-omap/sram.c5
-rw-r--r--arch/arm/plat-omap/timer32k.c38
-rw-r--r--arch/arm/tools/mach-types74
-rw-r--r--arch/arm/vfp/vfp.h15
-rw-r--r--arch/arm/vfp/vfpdouble.c95
-rw-r--r--arch/arm/vfp/vfpinstr.h8
-rw-r--r--arch/arm/vfp/vfpmodule.c40
-rw-r--r--arch/arm/vfp/vfpsingle.c95
174 files changed, 9075 insertions, 7941 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f81a62380ad..f9362ee9955 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -17,6 +17,10 @@ config ARM
Europe. There is an ARM Linux project with a web page at
<http://www.arm.linux.org.uk/>.
+config GENERIC_TIME
+ bool
+ default n
+
config MMU
bool
default y
@@ -51,6 +55,10 @@ config GENERIC_HARDIRQS
bool
default y
+config TRACE_IRQFLAGS_SUPPORT
+ bool
+ default y
+
config HARDIRQS_SW_RESEND
bool
default y
@@ -91,7 +99,7 @@ config ARCH_MTD_XIP
config VECTORS_BASE
hex
- default 0xffff0000 if MMU
+ default 0xffff0000 if MMU || CPU_HIGH_VECTOR
default DRAM_BASE if REMAP_VECTORS_TO_RAM
default 0x00000000
help
@@ -198,16 +206,27 @@ config ARCH_IMX
help
Support for Motorola's i.MX family of processors (MX1, MXL).
-config ARCH_IOP3XX
- bool "IOP3xx-based"
+config ARCH_IOP32X
+ bool "IOP32x-based"
+ depends on MMU
+ select PLAT_IOP
+ select PCI
+ help
+ Support for Intel's 80219 and IOP32X (XScale) family of
+ processors.
+
+config ARCH_IOP33X
+ bool "IOP33x-based"
depends on MMU
+ select PLAT_IOP
select PCI
help
- Support for Intel's IOP3XX (XScale) family of processors.
+ Support for Intel's IOP33X (XScale) family of processors.
config ARCH_IXP4XX
bool "IXP4xx-based"
depends on MMU
+ select GENERIC_TIME
help
Support for Intel's IXP4XX (XScale) family of processors.
@@ -308,7 +327,9 @@ source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
-source "arch/arm/mach-iop3xx/Kconfig"
+source "arch/arm/mach-iop32x/Kconfig"
+
+source "arch/arm/mach-iop33x/Kconfig"
source "arch/arm/mach-ixp4xx/Kconfig"
@@ -348,6 +369,9 @@ source "arch/arm/mach-netx/Kconfig"
config ARCH_ACORN
bool
+config PLAT_IOP
+ bool
+
source arch/arm/mm/Kconfig
# bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
@@ -602,6 +626,7 @@ config LEDS_CPU
config ALIGNMENT_TRAP
bool
+ depends on CPU_CP15_MMU
default y if !ARCH_EBSA110
help
ARM processors can not fetch/store information which is not
@@ -633,11 +658,12 @@ config ZBOOT_ROM_BSS
hex "Compressed ROM boot loader BSS address"
default "0"
help
- The base address of 64KiB of read/write memory in the target
- for the ROM-able zImage, which must be available while the
- decompressor is running. Platforms which normally make use of
- ROM-able zImage formats normally set this to a suitable
- value in their defconfig file.
+ The base address of an area of read/write memory in the target
+ for the ROM-able zImage which must be available while the
+ decompressor is running. It must be large enough to hold the
+ entire decompressed kernel plus an additional 128 KiB.
+ Platforms which normally make use of ROM-able zImage formats
+ normally set this to a suitable value in their defconfig file.
If ZBOOT_ROM is not enabled, this has no effect.
@@ -832,7 +858,7 @@ source "drivers/base/Kconfig"
source "drivers/connector/Kconfig"
-if ALIGNMENT_TRAP
+if ALIGNMENT_TRAP || !CPU_CP15_MMU
source "drivers/mtd/Kconfig"
endif
@@ -844,7 +870,7 @@ source "drivers/block/Kconfig"
source "drivers/acorn/block/Kconfig"
-if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
+if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
|| ARCH_IXP23XX
diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu
index e1574be2ded..f087376748d 100644
--- a/arch/arm/Kconfig-nommu
+++ b/arch/arm/Kconfig-nommu
@@ -25,6 +25,14 @@ config FLASH_SIZE
hex 'FLASH Size' if SET_MEM_PARAM
default 0x00400000
+config PROCESSOR_ID
+ hex
+ default 0x00007700
+ depends on !CPU_CP15
+ help
+ If processor has no CP15 register, this processor ID is
+ used instead of the auto-probing which utilizes the register.
+
config REMAP_VECTORS_TO_RAM
bool 'Install vectors to the begining of RAM' if DRAM_BASE
depends on DRAM_BASE
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 92873cdee31..2a0b2c8a1fe 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -55,7 +55,12 @@ arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3
# This selects how we optimise for the processor.
tune-$(CONFIG_CPU_ARM610) :=-mtune=arm610
tune-$(CONFIG_CPU_ARM710) :=-mtune=arm710
+tune-$(CONFIG_CPU_ARM7TDMI) :=-mtune=arm7tdmi
tune-$(CONFIG_CPU_ARM720T) :=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM740T) :=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM9TDMI) :=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM940T) :=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM946T) :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi
@@ -101,7 +106,8 @@ endif
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
- machine-$(CONFIG_ARCH_IOP3XX) := iop3xx
+ machine-$(CONFIG_ARCH_IOP32X) := iop32x
+ machine-$(CONFIG_ARCH_IOP33X) := iop33x
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_IXP2000) := ixp2000
machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
@@ -157,6 +163,7 @@ core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ)
core-$(CONFIG_VFP) += arch/arm/vfp/
# If we have a common platform directory, then include it in the build.
+core-$(CONFIG_PLAT_IOP) += arch/arm/plat-iop/
core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/
drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 2adc1527e0e..adddc713168 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -51,7 +51,11 @@ OBJS += head-at91rm9200.o
endif
ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
+ifeq ($(CONFIG_CPU_CP15),y)
OBJS += big-endian.o
+else
+# The endian should be set by h/w design.
+endif
endif
#
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 14a9ff9c68d..e5ab51b9cce 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -20,11 +20,21 @@
#ifdef DEBUG
#if defined(CONFIG_DEBUG_ICEDCC)
+
+#ifdef CONFIG_CPU_V6
+ .macro loadsp, rb
+ .endm
+ .macro writeb, ch, rb
+ mcr p14, 0, \ch, c0, c5, 0
+ .endm
+#else
.macro loadsp, rb
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c0, c1, 0
.endm
+#endif
+
#else
#include <asm/arch/debug-macro.S>
@@ -42,12 +52,6 @@
add \rb, \rb, #0x00010000 @ Ser1
#endif
.endm
-#elif defined(CONFIG_ARCH_IOP331)
- .macro loadsp, rb
- mov \rb, #0xff000000
- orr \rb, \rb, #0x00ff0000
- orr \rb, \rb, #0x0000f700 @ location of the UART
- .endm
#elif defined(CONFIG_ARCH_S3C2410)
.macro loadsp, rb
mov \rb, #0x50000000
@@ -78,9 +82,11 @@
kphex r6, 8 /* processor id */
kputc #':'
kphex r7, 8 /* architecture id */
+#ifdef CONFIG_CPU_CP15
kputc #':'
mrc p15, 0, r0, c1, c0
kphex r0, 8 /* control reg */
+#endif
kputc #'\n'
kphex r5, 8 /* decompressed kernel start */
kputc #'-'
@@ -503,7 +509,11 @@ call_kernel: bl cache_clean_flush
*/
call_cache_fn: adr r12, proc_types
+#ifdef CONFIG_CPU_CP15
mrc p15, 0, r6, c0, c0 @ get processor ID
+#else
+ ldr r6, =CONFIG_PROCESSOR_ID
+#endif
1: ldr r1, [r12, #0] @ get value
ldr r2, [r12, #4] @ get mask
eor r1, r1, r6 @ (real ^ match)
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index ace3fb5835d..283891c736c 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -30,6 +30,25 @@ static void putstr(const char *ptr);
#include <asm/arch/uncompress.h>
#ifdef CONFIG_DEBUG_ICEDCC
+
+#ifdef CONFIG_CPU_V6
+
+static void icedcc_putc(int ch)
+{
+ int status, i = 0x4000000;
+
+ do {
+ if (--i < 0)
+ return;
+
+ asm volatile ("mrc p14, 0, %0, c0, c1, 0" : "=r" (status));
+ } while (status & (1 << 29));
+
+ asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
+}
+
+#else
+
static void icedcc_putc(int ch)
{
int status, i = 0x4000000;
@@ -44,6 +63,8 @@ static void icedcc_putc(int ch)
asm("mcr p14, 0, %0, c1, c0, 0" : : "r" (ch));
}
+#endif
+
#define putc(ch) icedcc_putc(ch)
#define flush() do { } while (0)
#endif
diff --git a/arch/arm/common/icst307.c b/arch/arm/common/icst307.c
index bafe8b19be8..6d094c15754 100644
--- a/arch/arm/common/icst307.c
+++ b/arch/arm/common/icst307.c
@@ -57,7 +57,7 @@ icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq)
break;
} while (i < ARRAY_SIZE(idx2s));
- if (i > ARRAY_SIZE(idx2s))
+ if (i >= ARRAY_SIZE(idx2s))
return vco;
vco.s = idx2s[i];
@@ -119,7 +119,7 @@ icst307_ps_to_vco(const struct icst307_params *p, unsigned long period)
break;
} while (i < ARRAY_SIZE(idx2s));
- if (i > ARRAY_SIZE(idx2s))
+ if (i >= ARRAY_SIZE(idx2s))
return vco;
vco.s = idx2s[i];
diff --git a/arch/arm/common/icst525.c b/arch/arm/common/icst525.c
index 943ef88c037..3d377c5bdef 100644
--- a/arch/arm/common/icst525.c
+++ b/arch/arm/common/icst525.c
@@ -55,7 +55,7 @@ icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq)
break;
} while (i < ARRAY_SIZE(idx2s));
- if (i > ARRAY_SIZE(idx2s))
+ if (i >= ARRAY_SIZE(idx2s))
return vco;
vco.s = idx2s[i];
@@ -118,7 +118,7 @@ icst525_ps_to_vco(const struct icst525_params *p, unsigned long period)
break;
} while (i < ARRAY_SIZE(idx2s));
- if (i > ARRAY_SIZE(idx2s))
+ if (i >= ARRAY_SIZE(idx2s))
return vco;
vco.s = idx2s[i];
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 4e0dcaef6eb..181ef1ead5b 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -121,6 +121,13 @@ static struct locomo_dev_info locomo_devices[] = {
.offset = 0,
.length = 0,
},
+ {
+ .devid = LOCOMO_DEVID_SPI,
+ .irq = {},
+ .name = "locomo-spi",
+ .offset = LOCOMO_SPI,
+ .length = 0x30,
+ },
};
@@ -374,7 +381,7 @@ static void locomo_spi_handler(unsigned int irq, struct irqdesc *desc,
struct irqdesc *d;
void __iomem *mapbase = get_irq_chipdata(irq);
- req = locomo_readl(mapbase + LOCOMO_SPIIR) & 0x000F;
+ req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F;
if (req) {
irq = LOCOMO_IRQ_SPI_START;
d = irq_desc + irq;
@@ -391,35 +398,35 @@ static void locomo_spi_ack_irq(unsigned int irq)
{
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_SPIWE);
+ r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
- locomo_writel(r, mapbase + LOCOMO_SPIWE);
+ locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
- r = locomo_readl(mapbase + LOCOMO_SPIIS);
+ r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIS);
r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
- locomo_writel(r, mapbase + LOCOMO_SPIIS);
+ locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIS);
- r = locomo_readl(mapbase + LOCOMO_SPIWE);
+ r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
- locomo_writel(r, mapbase + LOCOMO_SPIWE);
+ locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
}
static void locomo_spi_mask_irq(unsigned int irq)
{
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_SPIIE);
+ r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
- locomo_writel(r, mapbase + LOCOMO_SPIIE);
+ locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
}
static void locomo_spi_unmask_irq(unsigned int irq)
{
void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
- r = locomo_readl(mapbase + LOCOMO_SPIIE);
+ r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
- locomo_writel(r, mapbase + LOCOMO_SPIIE);
+ locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
}
static struct irq_chip locomo_spi_chip = {
@@ -814,12 +821,15 @@ static inline struct locomo *locomo_chip_driver(struct locomo_dev *ldev)
return (struct locomo *)dev_get_drvdata(ldev->dev.parent);
}
-void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned int dir)
+void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir)
{
- struct locomo *lchip = locomo_chip_driver(ldev);
+ struct locomo *lchip = dev_get_drvdata(dev);
unsigned long flags;
unsigned int r;
+ if (!lchip)
+ return;
+
spin_lock_irqsave(&lchip->lock, flags);
r = locomo_readl(lchip->base + LOCOMO_GPD);
@@ -836,12 +846,15 @@ void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned in
spin_unlock_irqrestore(&lchip->lock, flags);
}
-unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits)
+int locomo_gpio_read_level(struct device *dev, unsigned int bits)
{
- struct locomo *lchip = locomo_chip_driver(ldev);
+ struct locomo *lchip = dev_get_drvdata(dev);
unsigned long flags;
unsigned int ret;
+ if (!lchip)
+ return -ENODEV;
+
spin_lock_irqsave(&lchip->lock, flags);
ret = locomo_readl(lchip->base + LOCOMO_GPL);
spin_unlock_irqrestore(&lchip->lock, flags);
@@ -850,12 +863,15 @@ unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits)
return ret;
}
-unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits)
+int locomo_gpio_read_output(struct device *dev, unsigned int bits)
{
- struct locomo *lchip = locomo_chip_driver(ldev);
+ struct locomo *lchip = dev_get_drvdata(dev);
unsigned long flags;
unsigned int ret;
+ if (!lchip)
+ return -ENODEV;
+
spin_lock_irqsave(&lchip->lock, flags);
ret = locomo_readl(lchip->base + LOCOMO_GPO);
spin_unlock_irqrestore(&lchip->lock, flags);
@@ -864,12 +880,15 @@ unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits)
return ret;
}
-void locomo_gpio_write(struct locomo_dev *ldev, unsigned int bits, unsigned int set)
+void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
{
- struct locomo *lchip = locomo_chip_driver(ldev);
+ struct locomo *lchip = dev_get_drvdata(dev);
unsigned long flags;
unsigned int r;
+ if (!lchip)
+ return;
+
spin_lock_irqsave(&lchip->lock, flags);
r = locomo_readl(lchip->base + LOCOMO_GPO);
@@ -1058,9 +1077,9 @@ void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
struct locomo *lchip = locomo_chip_driver(dev);
if (vr)
- locomo_gpio_write(dev, LOCOMO_GPIO_FL_VR, 1);
+ locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 1);
else
- locomo_gpio_write(dev, LOCOMO_GPIO_FL_VR, 0);
+ locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 0);
spin_lock_irqsave(&lchip->lock, flags);
locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 59b5ddec480..f412dedda68 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -40,6 +40,7 @@
#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */
#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */
#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */
+
#define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */
#define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */
#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */
@@ -575,6 +576,9 @@ static int corgi_pxa_pm_enter(suspend_state_t state)
while (corgi_enter_suspend(alarm_time,alarm_status,state))
{}
+ if (sharpsl_pm.machinfo->earlyresume)
+ sharpsl_pm.machinfo->earlyresume();
+
dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
return 0;
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 2948b4589a8..3b4802a849e 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -126,6 +126,7 @@ CONFIG_CRUNCH=y
# EP93xx Platforms
#
CONFIG_MACH_EDB9302=y
+CONFIG_MACH_EDB9312=y
CONFIG_MACH_EDB9315=y
CONFIG_MACH_EDB9315A=y
CONFIG_MACH_GESBC9312=y
diff --git a/arch/arm/configs/ep80219_defconfig b/arch/arm/configs/iop32x_defconfig
index 3c73b707c2f..0d67f66e78c 100644
--- a/arch/arm/configs/ep80219_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -1,50 +1,63 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:34:12 2005
+# Linux kernel version: 2.6.18-rc7
+# Tue Sep 19 00:30:18 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
-CONFIG_UID16=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -52,24 +65,52 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-CONFIG_ARCH_IOP3XX=y
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+CONFIG_ARCH_IOP32X=y
+# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
@@ -77,28 +118,19 @@ CONFIG_ARCH_IOP3XX=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
#
-# IOP3xx Implementation Options
+# IOP32x Implementation Options
#
#
-# IOP3xx Platform Types
+# IOP32x Platform Types
#
-# CONFIG_ARCH_IQ80321 is not set
+CONFIG_MACH_GLANTANK=y
+CONFIG_ARCH_IQ80321=y
CONFIG_ARCH_IQ31244=y
-# CONFIG_ARCH_IQ80331 is not set
-# CONFIG_MACH_IQ80332 is not set
-CONFIG_ARCH_EP80219=y
-CONFIG_ARCH_IOP321=y
-# CONFIG_ARCH_IOP331 is not set
-
-#
-# IOP3xx Chipset Features
-#
+CONFIG_MACH_N2100=y
+CONFIG_PLAT_IOP=y
#
# Processor Type
@@ -109,7 +141,6 @@ CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
#
# Processor Features
@@ -121,8 +152,7 @@ CONFIG_XSCALE_PMU=y
# Bus support
#
CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -133,6 +163,19 @@ CONFIG_PCI_NAMES=y
# Kernel Features
#
# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_ALIGNMENT_TRAP=y
#
@@ -140,7 +183,7 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp"
# CONFIG_XIP_KERNEL is not set
#
@@ -166,6 +209,93 @@ CONFIG_BINFMT_AOUT=y
# Power management options
#
# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -177,6 +307,13 @@ CONFIG_BINFMT_AOUT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
@@ -200,6 +337,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@@ -225,18 +363,18 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xf0000000
-CONFIG_MTD_PHYSMAP_LEN=0x00800000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
@@ -245,7 +383,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
@@ -261,6 +398,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
@@ -272,7 +414,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -284,17 +425,9 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
@@ -305,6 +438,7 @@ CONFIG_IOSCHED_CFQ=y
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -316,6 +450,7 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -330,10 +465,12 @@ CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -344,25 +481,19 @@ CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
@@ -377,8 +508,7 @@ CONFIG_BLK_DEV_MD=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
@@ -392,6 +522,9 @@ CONFIG_BLK_DEV_DM=y
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -404,71 +537,8 @@ CONFIG_BLK_DEV_DM=y
# CONFIG_I2O is not set
#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -481,14 +551,21 @@ CONFIG_NETDEVICES=y
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
#
# Tulip family network device support
@@ -526,16 +603,23 @@ CONFIG_E1000_NAPI=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
@@ -558,6 +642,8 @@ CONFIG_E1000_NAPI=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -595,7 +681,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -603,6 +688,7 @@ CONFIG_SOUND_GAMEPORT=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -610,7 +696,9 @@ CONFIG_HW_CONSOLE=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -618,6 +706,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -631,8 +720,8 @@ CONFIG_LEGACY_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -647,6 +736,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -671,14 +761,13 @@ CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
@@ -689,15 +778,45 @@ CONFIG_I2C_IOP3XX=y
# CONFIG_I2C_PCA_ISA is not set
#
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
#
-# CONFIG_I2C_SENSOR is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
@@ -712,36 +831,45 @@ CONFIG_I2C_IOP3XX=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
#
-# Other I2C Chip support
+# Misc devices
#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
#
-# Misc devices
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -751,6 +879,7 @@ CONFIG_I2C_IOP3XX=y
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
#
@@ -758,6 +887,7 @@ CONFIG_I2C_IOP3XX=y
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -769,7 +899,125 @@ CONFIG_DUMMY_CONSOLE=y
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
#
# USB Gadget Support
@@ -782,10 +1030,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_MMC is not set
#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -795,22 +1050,22 @@ CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -830,12 +1085,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -850,8 +1103,9 @@ CONFIG_RAMFS=y
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -868,16 +1122,19 @@ CONFIG_JFFS2_RTIME=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -886,6 +1143,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -905,6 +1163,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -921,11 +1180,34 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
#
# Security options
@@ -946,7 +1228,9 @@ CONFIG_DEBUG_USER=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff --git a/arch/arm/configs/iq80332_defconfig b/arch/arm/configs/iop33x_defconfig
index 11959b705d8..2a8fc153969 100644
--- a/arch/arm/configs/iq80332_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -1,50 +1,63 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 17:33:39 2005
+# Linux kernel version: 2.6.18-rc7
+# Tue Sep 19 00:30:42 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
-CONFIG_UID16=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -52,24 +65,52 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-CONFIG_ARCH_IOP3XX=y
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+CONFIG_ARCH_IOP33X=y
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
@@ -77,28 +118,17 @@ CONFIG_ARCH_IOP3XX=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
#
-# IOP3xx Implementation Options
+# IOP33x Implementation Options
#
#
-# IOP3xx Platform Types
+# IOP33x Platform Types
#
-# CONFIG_ARCH_IQ80321 is not set
-# CONFIG_ARCH_IQ31244 is not set
-# CONFIG_ARCH_IQ80331 is not set
+CONFIG_ARCH_IQ80331=y
CONFIG_MACH_IQ80332=y
-# CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP331=y
-
-#
-# IOP3xx Chipset Features
-#
-# CONFIG_IOP331_STEPD is not set
+CONFIG_PLAT_IOP=y
#
# Processor Type
@@ -109,7 +139,6 @@ CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
#
# Processor Features
@@ -121,8 +150,7 @@ CONFIG_XSCALE_PMU=y
# Bus support
#
CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -133,6 +161,19 @@ CONFIG_PCI_NAMES=y
# Kernel Features
#
# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_ALIGNMENT_TRAP=y
#
@@ -140,7 +181,7 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp"
# CONFIG_XIP_KERNEL is not set
#
@@ -166,6 +207,93 @@ CONFIG_BINFMT_AOUT=y
# Power management options
#
# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -177,6 +305,13 @@ CONFIG_BINFMT_AOUT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
@@ -200,6 +335,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@@ -222,6 +358,7 @@ CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
@@ -229,18 +366,18 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xc0000000
-CONFIG_MTD_PHYSMAP_LEN=0x00800000
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
@@ -249,7 +386,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
@@ -265,6 +401,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
@@ -276,7 +417,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -288,17 +428,9 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
@@ -309,6 +441,7 @@ CONFIG_IOSCHED_CFQ=y
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -320,6 +453,7 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -334,10 +468,12 @@ CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -348,25 +484,19 @@ CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
@@ -381,8 +511,7 @@ CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
@@ -396,6 +525,9 @@ CONFIG_BLK_DEV_DM=y
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -408,71 +540,8 @@ CONFIG_BLK_DEV_DM=y
# CONFIG_I2O is not set
#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
+# Network device support
#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -485,6 +554,10 @@ CONFIG_NETDEVICES=y
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+
+#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
@@ -501,14 +574,20 @@ CONFIG_E1000_NAPI=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
@@ -531,6 +610,8 @@ CONFIG_E1000_NAPI=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -568,7 +649,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -576,6 +656,7 @@ CONFIG_SOUND_GAMEPORT=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -583,7 +664,9 @@ CONFIG_HW_CONSOLE=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -591,6 +674,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -604,8 +688,8 @@ CONFIG_LEGACY_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -620,6 +704,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -644,14 +729,13 @@ CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
@@ -662,15 +746,45 @@ CONFIG_I2C_IOP3XX=y
# CONFIG_I2C_PCA_ISA is not set
#
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
#
-# CONFIG_I2C_SENSOR is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
@@ -685,36 +799,45 @@ CONFIG_I2C_IOP3XX=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
#
-# Other I2C Chip support
+# Misc devices
#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
#
-# Misc devices
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -724,6 +847,7 @@ CONFIG_I2C_IOP3XX=y
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
#
@@ -731,6 +855,7 @@ CONFIG_I2C_IOP3XX=y
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -742,9 +867,14 @@ CONFIG_DUMMY_CONSOLE=y
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -755,10 +885,17 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_MMC is not set
#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -768,22 +905,22 @@ CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -803,12 +940,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -834,16 +969,19 @@ CONFIG_RAMFS=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -852,6 +990,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -871,6 +1010,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -887,11 +1027,34 @@ CONFIG_MSDOS_PARTITION=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
#
# Security options
@@ -912,5 +1075,7 @@ CONFIG_DEBUG_USER=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
diff --git a/arch/arm/configs/iq31244_defconfig b/arch/arm/configs/iq31244_defconfig
deleted file mode 100644
index 32467160a6d..00000000000
--- a/arch/arm/configs/iq31244_defconfig
+++ /dev/null
@@ -1,922 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 02:10:38 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-CONFIG_ARCH_IOP3XX=y
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# IOP3xx Implementation Options
-#
-
-#
-# IOP3xx Platform Types
-#
-# CONFIG_ARCH_IQ80321 is not set
-CONFIG_ARCH_IQ31244=y
-# CONFIG_ARCH_IQ80331 is not set
-# CONFIG_MACH_IQ80332 is not set
-# CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP321=y
-# CONFIG_ARCH_IOP331 is not set
-
-#
-# IOP3xx Chipset Features
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xf0000000
-CONFIG_MTD_PHYSMAP_LEN=0x00800000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-# CONFIG_MD_LINEAR is not set
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID6 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/iq80321_defconfig b/arch/arm/configs/iq80321_defconfig
deleted file mode 100644
index b000da753c4..00000000000
--- a/arch/arm/configs/iq80321_defconfig
+++ /dev/null
@@ -1,843 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 13:24:10 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-CONFIG_ARCH_IOP3XX=y
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# IOP3xx Implementation Options
-#
-
-#
-# IOP3xx Platform Types
-#
-CONFIG_ARCH_IQ80321=y
-# CONFIG_ARCH_IQ31244 is not set
-# CONFIG_ARCH_IQ80331 is not set
-# CONFIG_MACH_IQ80332 is not set
-# CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP321=y
-# CONFIG_ARCH_IOP331 is not set
-
-#
-# IOP3xx Chipset Features
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xf0000000
-CONFIG_MTD_PHYSMAP_LEN=0x00800000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/iq80331_defconfig b/arch/arm/configs/iq80331_defconfig
deleted file mode 100644
index 46c79e1efe0..00000000000
--- a/arch/arm/configs/iq80331_defconfig
+++ /dev/null
@@ -1,916 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 15:13:37 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-CONFIG_ARCH_IOP3XX=y
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# IOP3xx Implementation Options
-#
-
-#
-# IOP3xx Platform Types
-#
-# CONFIG_ARCH_IQ80321 is not set
-# CONFIG_ARCH_IQ31244 is not set
-CONFIG_ARCH_IQ80331=y
-# CONFIG_MACH_IQ80332 is not set
-# CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP331=y
-
-#
-# IOP3xx Chipset Features
-#
-CONFIG_IOP331_STEPD=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="ip=boot root=nfs console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xc0000000
-CONFIG_MTD_PHYSMAP_LEN=0x00800000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID6 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index f20814e6f49..a8322264104 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,14 +1,19 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-git9
-# Sun Jun 25 23:56:32 2006
+# Linux kernel version: 2.6.18
+# Wed Sep 20 20:27:31 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
@@ -26,14 +31,15 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -46,6 +52,8 @@ CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@@ -84,7 +92,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
@@ -94,7 +102,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
@@ -122,13 +131,18 @@ CONFIG_ARCH_SMDK2410=y
CONFIG_ARCH_S3C2440=y
CONFIG_SMDK2440_CPU2440=y
CONFIG_SMDK2440_CPU2442=y
+CONFIG_MACH_S3C2413=y
CONFIG_MACH_SMDK2413=y
CONFIG_MACH_VR1000=y
CONFIG_MACH_RX3715=y
CONFIG_MACH_OTOM=y
CONFIG_MACH_NEXCODER_2440=y
+CONFIG_MACH_VSTMS=y
CONFIG_S3C2410_CLOCK=y
+CONFIG_S3C2410_PM=y
+CONFIG_CPU_S3C2410_DMA=y
CONFIG_CPU_S3C2410=y
+CONFIG_S3C2412_PM=y
CONFIG_CPU_S3C2412=y
CONFIG_CPU_S3C244X=y
CONFIG_CPU_S3C2440=y
@@ -156,7 +170,7 @@ CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
CONFIG_CPU_32=y
CONFIG_CPU_ARM920T=y
CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_ABRT_EV5TJ=y
@@ -200,6 +214,7 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_ALIGNMENT_TRAP=y
#
@@ -304,7 +319,6 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -460,6 +474,7 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
@@ -640,6 +655,7 @@ CONFIG_SERIO_LIBPS2=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
@@ -716,6 +732,7 @@ CONFIG_S3C2410_WATCHDOG=y
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_S3C2410_RTC=y
# CONFIG_DTLK is not set
@@ -857,12 +874,12 @@ CONFIG_VIDEO_V4L2=y
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
@@ -995,7 +1012,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
@@ -1095,6 +1112,7 @@ CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -1202,14 +1220,19 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
@@ -1251,3 +1274,4 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c
index 33c55689f99..ecf4f9472d9 100644
--- a/arch/arm/kernel/apm.c
+++ b/arch/arm/kernel/apm.c
@@ -25,6 +25,7 @@
#include <linux/list.h>
#include <linux/init.h>
#include <linux/completion.h>
+#include <linux/kthread.h>
#include <asm/apm.h> /* apm_power_info */
#include <asm/system.h>
@@ -80,7 +81,7 @@ struct apm_user {
*/
static int suspends_pending;
static int apm_disabled;
-static int arm_apm_active;
+static struct task_struct *kapmd_tsk;
static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
@@ -97,7 +98,6 @@ static LIST_HEAD(apm_user_list);
* to be suspending the system.
*/
static DECLARE_WAIT_QUEUE_HEAD(kapmd_wait);
-static DECLARE_COMPLETION(kapmd_exit);
static DEFINE_SPINLOCK(kapmd_queue_lock);
static struct apm_queue kapmd_queue;
@@ -468,16 +468,13 @@ static int apm_get_info(char *buf, char **start, off_t fpos, int length)
static int kapmd(void *arg)
{
- daemonize("kapmd");
- current->flags |= PF_NOFREEZE;
-
do {
apm_event_t event;
wait_event_interruptible(kapmd_wait,
- !queue_empty(&kapmd_queue) || !arm_apm_active);
+ !queue_empty(&kapmd_queue) || kthread_should_stop());
- if (!arm_apm_active)
+ if (kthread_should_stop())
break;
spin_lock_irq(&kapmd_queue_lock);
@@ -508,7 +505,7 @@ static int kapmd(void *arg)
}
} while (1);
- complete_and_exit(&kapmd_exit, 0);
+ return 0;
}
static int __init apm_init(void)
@@ -520,13 +517,14 @@ static int __init apm_init(void)
return -ENODEV;
}
- arm_apm_active = 1;
-
- ret = kernel_thread(kapmd, NULL, CLONE_KERNEL);
- if (ret < 0) {
- arm_apm_active = 0;
+ kapmd_tsk = kthread_create(kapmd, NULL, "kapmd");
+ if (IS_ERR(kapmd_tsk)) {
+ ret = PTR_ERR(kapmd_tsk);
+ kapmd_tsk = NULL;
return ret;
}
+ kapmd_tsk->flags |= PF_NOFREEZE;
+ wake_up_process(kapmd_tsk);
#ifdef CONFIG_PROC_FS
create_proc_info_entry("apm", 0, NULL, apm_get_info);
@@ -535,10 +533,7 @@ static int __init apm_init(void)
ret = misc_register(&apm_device);
if (ret != 0) {
remove_proc_entry("apm", NULL);
-
- arm_apm_active = 0;
- wake_up(&kapmd_wait);
- wait_for_completion(&kapmd_exit);
+ kthread_stop(kapmd_tsk);
}
return ret;
@@ -549,9 +544,7 @@ static void __exit apm_exit(void)
misc_deregister(&apm_device);
remove_proc_entry("apm", NULL);
- arm_apm_active = 0;
- wake_up(&kapmd_wait);
- wait_for_completion(&kapmd_exit);
+ kthread_stop(kapmd_tsk);
}
module_init(apm_init);
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index a5747e58a9d..5617566477b 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -21,6 +21,36 @@
#if defined(CONFIG_DEBUG_ICEDCC)
@@ debug using ARM EmbeddedICE DCC channel
+
+#if defined(CONFIG_CPU_V6)
+
+ .macro addruart, rx
+ .endm
+
+ .macro senduart, rd, rx
+ mcr p14, 0, \rd, c0, c5, 0
+ .endm
+
+ .macro busyuart, rd, rx
+1001:
+ mrc p14, 0, \rx, c0, c1, 0
+ tst \rx, #0x20000000
+ beq 1001b
+ .endm
+
+ .macro waituart, rd, rx
+ mov \rd, #0x2000000
+1001:
+ subs \rd, \rd, #1
+ bmi 1002f
+ mrc p14, 0, \rx, c0, c1, 0
+ tst \rx, #0x20000000
+ bne 1001b
+1002:
+ .endm
+
+#else
+
.macro addruart, rx
.endm
@@ -46,9 +76,12 @@
bne 1001b
1002:
.endm
+
+#endif /* CONFIG_CPU_V6 */
+
#else
#include <asm/arch/debug-macro.S>
-#endif
+#endif /* CONFIG_DEBUG_ICEDCC */
/*
* Useful debugging routines
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index de4e3313790..bd623b73445 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -191,6 +191,9 @@ __dabt_svc:
__irq_svc:
svc_entry
+#ifdef CONFIG_TRACE_IRQFLAGS
+ bl trace_hardirqs_off
+#endif
#ifdef CONFIG_PREEMPT
get_thread_info tsk
ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
@@ -211,6 +214,10 @@ preempt_return:
#endif
ldr r0, [sp, #S_PSR] @ irqs are already disabled
msr spsr_cxsf, r0
+#ifdef CONFIG_TRACE_IRQFLAGS
+ tst r0, #PSR_I_BIT
+ bleq trace_hardirqs_on
+#endif
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
.ltorg
@@ -398,6 +405,9 @@ __dabt_usr:
__irq_usr:
usr_entry
+#ifdef CONFIG_TRACE_IRQFLAGS
+ bl trace_hardirqs_off
+#endif
get_thread_info tsk
#ifdef CONFIG_PREEMPT
ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
@@ -412,6 +422,9 @@ __irq_usr:
teq r0, r7
strne r0, [r0, -r0]
#endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+ bl trace_hardirqs_on
+#endif
mov why, #0
b ret_to_user
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index ac9eb3d3051..f359a189dcf 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -9,7 +9,6 @@
* published by the Free Software Foundation.
*
* Common kernel startup code (non-paged MM)
- * for 32-bit CPUs which has a process ID register(CP15).
*
*/
#include <linux/linkage.h>
@@ -40,7 +39,11 @@
ENTRY(stext)
msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
@ and irqs disabled
+#ifndef CONFIG_CPU_CP15
+ ldr r9, =CONFIG_PROCESSOR_ID
+#else
mrc p15, 0, r9, c0, c0 @ get processor id
+#endif
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
beq __error_p @ yes, error 'p'
@@ -58,6 +61,7 @@ ENTRY(stext)
*/
.type __after_proc_init, %function
__after_proc_init:
+#ifdef CONFIG_CPU_CP15
mrc p15, 0, r0, c1, c0, 0 @ read control reg
#ifdef CONFIG_ALIGNMENT_TRAP
orr r0, r0, #CR_A
@@ -73,7 +77,13 @@ __after_proc_init:
#ifdef CONFIG_CPU_ICACHE_DISABLE
bic r0, r0, #CR_I
#endif
+#ifdef CONFIG_CPU_HIGH_VECTOR
+ orr r0, r0, #CR_V
+#else
+ bic r0, r0, #CR_V
+#endif
mcr p15, 0, r0, c1, c0, 0 @ write control reg
+#endif /* CONFIG_CPU_CP15 */
mov pc, r13 @ clear the BSS and jump
@ to start_kernel
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 298363d9704..1b061583408 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -2,6 +2,7 @@
* linux/arch/arm/kernel/module.c
*
* Copyright (C) 2002 Russell King.
+ * Modified for nommu by Hyok S. Choi
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -32,6 +33,7 @@ extern void _etext;
#define MODULE_START (((unsigned long)&_etext + ~PGDIR_MASK) & PGDIR_MASK)
#endif
+#ifdef CONFIG_MMU
void *module_alloc(unsigned long size)
{
struct vm_struct *area;
@@ -46,6 +48,12 @@ void *module_alloc(unsigned long size)
return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL);
}
+#else /* CONFIG_MMU */
+void *module_alloc(unsigned long size)
+{
+ return size == 0 ? NULL : vmalloc(size);
+}
+#endif /* !CONFIG_MMU */
void module_free(struct module *module, void *region)
{
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 3079535afcc..bf35c178a87 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -221,16 +221,26 @@ void __show_regs(struct pt_regs *regs)
processor_modes[processor_mode(regs)],
thumb_mode(regs) ? " (T)" : "",
get_fs() == get_ds() ? "kernel" : "user");
+#if CONFIG_CPU_CP15
{
- unsigned int ctrl, transbase, dac;
+ unsigned int ctrl;
__asm__ (
" mrc p15, 0, %0, c1, c0\n"
- " mrc p15, 0, %1, c2, c0\n"
- " mrc p15, 0, %2, c3, c0\n"
- : "=r" (ctrl), "=r" (transbase), "=r" (dac));
- printk("Control: %04X Table: %08X DAC: %08X\n",
- ctrl, transbase, dac);
+ : "=r" (ctrl));
+ printk("Control: %04X\n", ctrl);
}
+#ifdef CONFIG_CPU_CP15_MMU
+ {
+ unsigned int transbase, dac;
+ __asm__ (
+ " mrc p15, 0, %0, c2, c0\n"
+ " mrc p15, 0, %1, c3, c0\n"
+ : "=r" (transbase), "=r" (dac));
+ printk("Table: %08X DAC: %08X\n",
+ transbase, dac);
+ }
+#endif
+#endif
}
void show_regs(struct pt_regs * regs)
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 09a67d77185..d4dceb5f06e 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -69,10 +69,12 @@ EXPORT_SYMBOL(profile_pc);
*/
int (*set_rtc)(void);
+#ifndef CONFIG_GENERIC_TIME
static unsigned long dummy_gettimeoffset(void)
{
return 0;
}
+#endif
/*
* Scheduler clock - returns current time in nanosec units.
@@ -230,6 +232,7 @@ static inline void do_leds(void)
#define do_leds()
#endif
+#ifndef CONFIG_GENERIC_TIME
void do_gettimeofday(struct timeval *tv)
{
unsigned long flags;
@@ -291,6 +294,7 @@ int do_settimeofday(struct timespec *tv)
}
EXPORT_SYMBOL(do_settimeofday);
+#endif /* !CONFIG_GENERIC_TIME */
/**
* save_time_delta - Save the offset between system time and RTC time
@@ -500,8 +504,10 @@ device_initcall(timer_init_sysfs);
void __init time_init(void)
{
+#ifndef CONFIG_GENERIC_TIME
if (system_timer->offset == NULL)
system_timer->offset = dummy_gettimeoffset;
+#endif
system_timer->init();
#ifdef CONFIG_NO_IDLE_HZ
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index aeeed806f99..bede380c07a 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -191,7 +191,7 @@ void show_stack(struct task_struct *tsk, unsigned long *sp)
if (tsk != current)
fp = thread_saved_fp(tsk);
else
- asm("mov%? %0, fp" : "=r" (fp));
+ asm("mov %0, fp" : "=r" (fp) : : "cc");
c_backtrace(fp, 0x10);
barrier();
diff --git a/arch/arm/mach-at91rm9200/at91rm9200.c b/arch/arm/mach-at91rm9200/at91rm9200.c
index 0985b1c42c7..dcf6136fedf 100644
--- a/arch/arm/mach-at91rm9200/at91rm9200.c
+++ b/arch/arm/mach-at91rm9200/at91rm9200.c
@@ -17,6 +17,7 @@
#include <asm/hardware.h>
#include "generic.h"
+#include "clock.h"
static struct map_desc at91rm9200_io_desc[] __initdata = {
{
@@ -26,87 +27,224 @@ static struct map_desc at91rm9200_io_desc[] __initdata = {
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_SPI,
- .pfn = __phys_to_pfn(AT91_BASE_SPI),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_SSC2,
- .pfn = __phys_to_pfn(AT91_BASE_SSC2),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_SSC1,
- .pfn = __phys_to_pfn(AT91_BASE_SSC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_SSC0,
- .pfn = __phys_to_pfn(AT91_BASE_SSC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_US3,
- .pfn = __phys_to_pfn(AT91_BASE_US3),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_US2,
- .pfn = __phys_to_pfn(AT91_BASE_US2),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_US1,
- .pfn = __phys_to_pfn(AT91_BASE_US1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_US0,
- .pfn = __phys_to_pfn(AT91_BASE_US0),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_SPI),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_EMAC,
- .pfn = __phys_to_pfn(AT91_BASE_EMAC),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_TWI,
- .pfn = __phys_to_pfn(AT91_BASE_TWI),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_TWI),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_MCI,
- .pfn = __phys_to_pfn(AT91_BASE_MCI),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_MCI),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_UDP,
- .pfn = __phys_to_pfn(AT91_BASE_UDP),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_TCB1,
- .pfn = __phys_to_pfn(AT91_BASE_TCB1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_TCB0,
- .pfn = __phys_to_pfn(AT91_BASE_TCB0),
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_UDP),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_SRAM_VIRT_BASE,
- .pfn = __phys_to_pfn(AT91_SRAM_BASE),
- .length = AT91_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE),
+ .length = AT91RM9200_SRAM_SIZE,
.type = MT_DEVICE,
},
};
-void __init at91rm9200_map_io(void)
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk udc_clk = {
+ .name = "udc_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_UDP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ether_clk = {
+ .name = "ether_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+ .name = "mci_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_MCI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+ .name = "twi_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_TWI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+ .name = "usart3_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_US3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi_clk = {
+ .name = "spi_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_SPI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+ .name = "pioC_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_PIOC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioD_clk = {
+ .name = "pioD_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_PIOD,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioC_clk,
+ &pioD_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &usart3_clk,
+ &mmc_clk,
+ &udc_clk,
+ &twi_clk,
+ &spi_clk,
+ // ssc 0 .. ssc2
+ // tc0 .. tc5
+ &ohci_clk,
+ &ether_clk,
+ // irq0 .. irq6
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+static struct clk pck2 = {
+ .name = "pck2",
+ .pmc_mask = AT91_PMC_PCK2,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 2,
+};
+static struct clk pck3 = {
+ .name = "pck3",
+ .pmc_mask = AT91_PMC_PCK3,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 3,
+};
+
+static void __init at91rm9200_register_clocks(void)
{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+ clk_register(&pck2);
+ clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91rm9200_gpio[] = {
+ {
+ .id = AT91RM9200_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT91RM9200_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT91RM9200_ID_PIOC,
+ .offset = AT91_PIOC,
+ .clock = &pioC_clk,
+ }, {
+ .id = AT91RM9200_ID_PIOD,
+ .offset = AT91_PIOD,
+ .clock = &pioD_clk,
+ }
+};
+
+/* --------------------------------------------------------------------
+ * AT91RM9200 processor initialization
+ * -------------------------------------------------------------------- */
+void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
+{
+ /* Map peripherals */
iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91rm9200_register_clocks();
+
+ /* Initialize GPIO subsystem */
+ at91_gpio_init(at91rm9200_gpio, banks);
}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
/*
* The default interrupt priority levels (0 = lowest, 7 = highest).
*/
@@ -145,10 +283,14 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
0 /* Advanced Interrupt Controller (IRQ6) */
};
-void __init at91rm9200_init_irq(unsigned int priority[NR_AIC_IRQS])
+void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
if (!priority)
priority = at91rm9200_default_irq_priority;
+ /* Initialize the AIC interrupt controller */
at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
}
diff --git a/arch/arm/mach-at91rm9200/board-1arm.c b/arch/arm/mach-at91rm9200/board-1arm.c
index dc79e0992af..36eecd7161f 100644
--- a/arch/arm/mach-at91rm9200/board-1arm.c
+++ b/arch/arm/mach-at91rm9200/board-1arm.c
@@ -34,20 +34,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/hardware.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
#include "generic.h"
-static void __init onearm_init_irq(void)
-{
- /* Initialize AIC controller */
- at91rm9200_init_irq(NULL);
-
- /* Set up the GPIO interrupts */
- at91_gpio_irq_setup(PQFP_GPIO_BANKS);
-}
/*
* Serial port configuration.
@@ -62,15 +53,18 @@ static struct at91_uart_config __initdata onearm_uart_config = {
static void __init onearm_map_io(void)
{
- at91rm9200_map_io();
-
- /* Initialize clocks: 18.432 MHz crystal */
- at91_clock_init(18432000);
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
/* Setup the serial ports and console */
at91_init_serial(&onearm_uart_config);
}
+static void __init onearm_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
static struct at91_eth_data __initdata onearm_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
diff --git a/arch/arm/mach-at91rm9200/board-carmeva.c b/arch/arm/mach-at91rm9200/board-carmeva.c
index 2c138b542eb..50e513681ae 100644
--- a/arch/arm/mach-at91rm9200/board-carmeva.c
+++ b/arch/arm/mach-at91rm9200/board-carmeva.c
@@ -35,20 +35,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/hardware.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
#include "generic.h"
-static void __init carmeva_init_irq(void)
-{
- /* Initialize AIC controller */
- at91rm9200_init_irq(NULL);
-
- /* Set up the GPIO interrupts */
- at91_gpio_irq_setup(BGA_GPIO_BANKS);
-}
/*
* Serial port configuration.
@@ -63,15 +54,19 @@ static struct at91_uart_config __initdata carmeva_uart_config = {
static void __init carmeva_map_io(void)
{
- at91rm9200_map_io();
-
- /* Initialize clocks: 20.000 MHz crystal */
- at91_clock_init(20000000);
+ /* Initialize processor: 20.000 MHz crystal */
+ at91rm9200_initialize(20000000, AT91RM9200_BGA);
/* Setup the serial ports and console */
at91_init_serial(&carmeva_uart_config);
}
+static void __init carmeva_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+
static struct at91_eth_data __initdata carmeva_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c
index 794d3fbb449..8eeae491ce7 100644
--- a/arch/arm/mach-at91rm9200/board-csb337.c
+++ b/arch/arm/mach-at91rm9200/board-csb337.c
@@ -34,20 +34,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/hardware.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
#include "generic.h"
-static void __init csb337_init_irq(void)
-{
- /* Initialize AIC controller */
- at91rm9200_init_irq(NULL);
-
- /* Set up the GPIO interrupts */
- at91_gpio_irq_setup(BGA_GPIO_BANKS);
-}
/*
* Serial port configuration.
@@ -62,10 +53,8 @@ static struct at91_uart_config __initdata csb337_uart_config = {
static void __init csb337_map_io(void)
{
- at91rm9200_map_io();
-
- /* Initialize clocks: 3.6864 MHz crystal */
- at91_clock_init(3686400);
+ /* Initialize processor: 3.6864 MHz crystal */
+ at91rm9200_initialize(3686400, AT91RM9200_BGA);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
@@ -74,6 +63,11 @@ static void __init csb337_map_io(void)
at91_init_serial(&csb337_uart_config);
}
+static void __init csb337_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
static struct at91_eth_data __initdata csb337_eth_data = {
.phy_irq_pin = AT91_PIN_PC2,
.is_rmii = 0,
diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91rm9200/board-csb637.c
index c8b6f334246..a29fa0e822c 100644
--- a/arch/arm/mach-at91rm9200/board-csb637.c
+++ b/arch/arm/mach-at91rm9200/board-csb637.c
@@ -33,20 +33,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/hardware.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
#include "generic.h"
-static void __init csb637_init_irq(void)
-{
- /* Initialize AIC controller */
- at91rm9200_init_irq(NULL);
-
- /* Set up the GPIO interrupts */
- at91_gpio_irq_setup(BGA_GPIO_BANKS);
-}
/*
* Serial port configuration.
@@ -61,10 +52,8 @@ static struct at91_uart_config __initdata csb637_uart_config = {
static void __init csb637_map_io(void)
{
- at91rm9200_map_io();
-
- /* Initialize clocks: 3.6864 MHz crystal */
- at91_clock_init(3686400);
+ /* Initialize processor: 3.6864 MHz crystal */
+ at91rm9200_initialize(3686400, AT91RM9200_BGA);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
@@ -73,6 +62,11 @@ static void __init csb637_map_io(void)
at91_init_serial(&csb637_uart_config);
}
+static void __init csb637_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
static struct at91_eth_data __initdata csb637_eth_data = {
.phy_irq_pin = AT91_PIN_PC0,
.is_rmii = 0,
diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91rm9200/board-dk.c
index 65873037e02..c699f3984d4 100644
--- a/arch/arm/mach-at91rm9200/board-dk.c
+++ b/arch/arm/mach-at91rm9200/board-dk.c
@@ -37,20 +37,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/hardware.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
#include "generic.h"
-static void __init dk_init_irq(void)
-{
- /* Initialize AIC controller */
- at91rm9200_init_irq(NULL);
-
- /* Set up the GPIO interrupts */
- at91_gpio_irq_setup(BGA_GPIO_BANKS);
-}
/*
* Serial port configuration.
@@ -65,10 +56,8 @@ static struct at91_uart_config __initdata dk_uart_config = {
static void __init dk_map_io(void)
{
- at91rm9200_map_io();
-
- /* Initialize clocks: 18.432 MHz crystal */
- at91_clock_init(18432000);
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_BGA);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
@@ -77,6 +66,11 @@ static void __init dk_map_io(void)
at91_init_serial(&dk_uart_config);
}
+static void __init dk_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
static struct at91_eth_data __initdata dk_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
@@ -128,6 +122,29 @@ static struct spi_board_info dk_spi_devices[] = {
#endif
};
+static struct mtd_partition __initdata dk_nand_partition[] = {
+ {
+ .name = "NAND Partition 1",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(dk_nand_partition);
+ return dk_nand_partition;
+}
+
+static struct at91_nand_data __initdata dk_nand_data = {
+ .ale = 22,
+ .cle = 21,
+ .det_pin = AT91_PIN_PB1,
+ .rdy_pin = AT91_PIN_PC2,
+ // .enable_pin = ... not there
+ .partition_info = nand_partitions,
+};
+
static void __init dk_board_init(void)
{
/* Serial */
@@ -153,6 +170,8 @@ static void __init dk_board_init(void)
at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
at91_add_device_mmc(&dk_mmc_data);
#endif
+ /* NAND */
+ at91_add_device_nand(&dk_nand_data);
/* VGA */
// dk_add_device_video();
}
diff --git a/arch/arm/mach-at91rm9200/board-eb9200.c b/arch/arm/mach-at91rm9200/board-eb9200.c
index a3e2df968a6..c6e0d51fbea 100644
--- a/arch/arm/mach-at91rm9200/board-eb9200.c
+++ b/arch/arm/mach-at91rm9200/board-eb9200.c
@@ -35,20 +35,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/hardware.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
#include "generic.h"
-static void __init eb9200_init_irq(void)
-{
- /* Initialize AIC controller */
- at91rm9200_init_irq(NULL);
-
- /* Set up the GPIO interrupts */
- at91_gpio_irq_setup(BGA_GPIO_BANKS);
-}
/*
* Serial port configuration.
@@ -63,15 +54,18 @@ static struct at91_uart_config __initdata eb9200_uart_config = {
static void __init eb9200_map_io(void)
{
- at91rm9200_map_io();
-
- /* Initialize clocks: 18.432 MHz crystal */
- at91_clock_init(18432000);
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_BGA);
/* Setup the serial ports and console */
at91_init_serial(&eb9200_uart_config);
}
+static void __init eb9200_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
static struct at91_eth_data __initdata eb9200_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c
index 868192351dd..830eb793217 100644
--- a/arch/arm/mach-at91rm9200/board-ek.c
+++ b/arch/arm/mach-at91rm9200/board-ek.c
@@ -37,20 +37,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/hardware.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
#include "generic.h"
-static void __init ek_init_irq(void)
-{
- /* Initialize AIC controller */
- at91rm9200_init_irq(NULL);
-
- /* Set up the GPIO interrupts */
- at91_gpio_irq_setup(BGA_GPIO_BANKS);
-}
/*
* Serial port configuration.
@@ -65,10 +56,8 @@ static struct at91_uart_config __initdata ek_uart_config = {
static void __init ek_map_io(void)
{
- at91rm9200_map_io();
-
- /* Initialize clocks: 18.432 MHz crystal */
- at91_clock_init(18432000);
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_BGA);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
@@ -77,6 +66,11 @@ static void __init ek_map_io(void)
at91_init_serial(&ek_uart_config);
}
+static void __init ek_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
static struct at91_eth_data __initdata ek_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
diff --git a/arch/arm/mach-at91rm9200/board-kafa.c b/arch/arm/mach-at91rm9200/board-kafa.c
index bf760c5e0c4..91e301924f2 100644
--- a/arch/arm/mach-at91rm9200/board-kafa.c
+++ b/arch/arm/mach-at91rm9200/board-kafa.c
@@ -34,20 +34,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/hardware.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
#include "generic.h"
-static void __init kafa_init_irq(void)
-{
- /* Initialize AIC controller */
- at91rm9200_init_irq(NULL);
-
- /* Set up the GPIO interrupts */
- at91_gpio_irq_setup(PQFP_GPIO_BANKS);
-}
/*
* Serial port configuration.
@@ -62,10 +53,8 @@ static struct at91_uart_config __initdata kafa_uart_config = {
static void __init kafa_map_io(void)
{
- at91rm9200_map_io();
-
- /* Initialize clocks: 18.432 MHz crystal */
- at91_clock_init(18432000);
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
@@ -74,6 +63,11 @@ static void __init kafa_map_io(void)
at91_init_serial(&kafa_uart_config);
}
+static void __init kafa_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
static struct at91_eth_data __initdata kafa_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 0,
diff --git a/arch/arm/mach-at91rm9200/board-kb9202.c b/arch/arm/mach-at91rm9200/board-kb9202.c
index f06d2b54cc9..272fe43bcec 100644
--- a/arch/arm/mach-at91rm9200/board-kb9202.c
+++ b/arch/arm/mach-at91rm9200/board-kb9202.c
@@ -35,20 +35,11 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/hardware.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
#include "generic.h"
-static void __init kb9202_init_irq(void)
-{
- /* Initialize AIC controller */
- at91rm9200_init_irq(NULL);
-
- /* Set up the GPIO interrupts */
- at91_gpio_irq_setup(PQFP_GPIO_BANKS);
-}
/*
* Serial port configuration.
@@ -63,10 +54,8 @@ static struct at91_uart_config __initdata kb9202_uart_config = {
static void __init kb9202_map_io(void)
{
- at91rm9200_map_io();
-
- /* Initialize clocks: 10 MHz crystal */
- at91_clock_init(10000000);
+ /* Initialize processor: 10 MHz crystal */
+ at91rm9200_initialize(10000000, AT91RM9200_PQFP);
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
@@ -75,6 +64,11 @@ static void __init kb9202_map_io(void)
at91_init_serial(&kb9202_uart_config);
}
+static void __init kb9202_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
static struct at91_eth_data __initdata kb9202_eth_data = {
.phy_irq_pin = AT91_PIN_PB29,
.is_rmii = 0,
@@ -95,6 +89,29 @@ static struct at91_mmc_data __initdata kb9202_mmc_data = {
.wire4 = 1,
};
+static struct mtd_partition __initdata kb9202_nand_partition[] = {
+ {
+ .name = "nand_fs",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(kb9202_nand_partition);
+ return kb9202_nand_partition;
+}
+
+static struct at91_nand_data __initdata kb9202_nand_data = {
+ .ale = 22,
+ .cle = 21,
+ // .det_pin = ... not there
+ .rdy_pin = AT91_PIN_PC29,
+ .enable_pin = AT91_PIN_PC28,
+ .partition_info = nand_partitions,
+};
+
static void __init kb9202_board_init(void)
{
/* Serial */
@@ -111,6 +128,8 @@ static void __init kb9202_board_init(void)
at91_add_device_i2c();
/* SPI */
at91_add_device_spi(NULL, 0);
+ /* NAND */
+ at91_add_device_nand(&kb9202_nand_data);
}
MACHINE_START(KB9200, "KB920x")
diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c
index edc2cc837ae..a43b061a7c8 100644
--- a/arch/arm/mach-at91rm9200/clock.c
+++ b/arch/arm/mach-at91rm9200/clock.c
@@ -29,7 +29,7 @@
#include <asm/hardware.h>
-#include "generic.h"
+#include "clock.h"
/*
@@ -38,23 +38,15 @@
* PLLB be used at other rates (on boards that don't need USB), etc.
*/
-struct clk {
- const char *name; /* unique clock name */
- const char *function; /* function of the clock */
- struct device *dev; /* device associated with function */
- unsigned long rate_hz;
- struct clk *parent;
- u32 pmc_mask;
- void (*mode)(struct clk *, int);
- unsigned id:2; /* PCK0..3, or 32k/main/a/b */
- unsigned primary:1;
- unsigned pll:1;
- unsigned programmable:1;
- u16 users;
-};
+#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY)
+#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE)
+#define clk_is_peripheral(x) ((x)->type & CLK_TYPE_PERIPHERAL)
+
+
+static LIST_HEAD(clocks);
+static DEFINE_SPINLOCK(clk_lock);
-static spinlock_t clk_lock;
-static u32 at91_pllb_usb_init;
+static u32 at91_pllb_usb_init;
/*
* Four primary clock sources: two crystal oscillators (32K, main), and
@@ -67,21 +59,20 @@ static struct clk clk32k = {
.rate_hz = AT91_SLOW_CLOCK,
.users = 1, /* always on */
.id = 0,
- .primary = 1,
+ .type = CLK_TYPE_PRIMARY,
};
static struct clk main_clk = {
.name = "main",
.pmc_mask = AT91_PMC_MOSCS, /* in PMC_SR */
.id = 1,
- .primary = 1,
+ .type = CLK_TYPE_PRIMARY,
};
static struct clk plla = {
.name = "plla",
.parent = &main_clk,
.pmc_mask = AT91_PMC_LOCKA, /* in PMC_SR */
.id = 2,
- .primary = 1,
- .pll = 1,
+ .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
};
static void pllb_mode(struct clk *clk, int is_on)
@@ -94,6 +85,7 @@ static void pllb_mode(struct clk *clk, int is_on)
} else
value = 0;
+ // REVISIT: Add work-around for AT91RM9200 Errata #26 ?
at91_sys_write(AT91_CKGR_PLLBR, value);
do {
@@ -107,8 +99,7 @@ static struct clk pllb = {
.pmc_mask = AT91_PMC_LOCKB, /* in PMC_SR */
.mode = pllb_mode,
.id = 3,
- .primary = 1,
- .pll = 1,
+ .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
};
static void pmc_sys_mode(struct clk *clk, int is_on)
@@ -133,41 +124,6 @@ static struct clk uhpck = {
.mode = pmc_sys_mode,
};
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-/*
- * The four programmable clocks can be parented by any primary clock.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .mode = pmc_sys_mode,
- .programmable = 1,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .mode = pmc_sys_mode,
- .programmable = 1,
- .id = 1,
-};
-static struct clk pck2 = {
- .name = "pck2",
- .pmc_mask = AT91_PMC_PCK2,
- .mode = pmc_sys_mode,
- .programmable = 1,
- .id = 2,
-};
-static struct clk pck3 = {
- .name = "pck3",
- .pmc_mask = AT91_PMC_PCK3,
- .mode = pmc_sys_mode,
- .programmable = 1,
- .id = 3,
-};
-#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
-
/*
* The master clock is divided from the CPU clock (by 1-4). It's used for
@@ -187,131 +143,21 @@ static void pmc_periph_mode(struct clk *clk, int is_on)
at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask);
}
-static struct clk udc_clk = {
- .name = "udc_clk",
- .parent = &mck,
- .pmc_mask = 1 << AT91_ID_UDP,
- .mode = pmc_periph_mode,
-};
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .parent = &mck,
- .pmc_mask = 1 << AT91_ID_UHP,
- .mode = pmc_periph_mode,
-};
-static struct clk ether_clk = {
- .name = "ether_clk",
- .parent = &mck,
- .pmc_mask = 1 << AT91_ID_EMAC,
- .mode = pmc_periph_mode,
-};
-static struct clk mmc_clk = {
- .name = "mci_clk",
- .parent = &mck,
- .pmc_mask = 1 << AT91_ID_MCI,
- .mode = pmc_periph_mode,
-};
-static struct clk twi_clk = {
- .name = "twi_clk",
- .parent = &mck,
- .pmc_mask = 1 << AT91_ID_TWI,
- .mode = pmc_periph_mode,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .parent = &mck,
- .pmc_mask = 1 << AT91_ID_US0,
- .mode = pmc_periph_mode,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .parent = &mck,
- .pmc_mask = 1 << AT91_ID_US1,
- .mode = pmc_periph_mode,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .parent = &mck,
- .pmc_mask = 1 << AT91_ID_US2,
- .mode = pmc_periph_mode,
-};
-static struct clk usart3_clk = {
- .name = "usart3_clk",
- .parent = &mck,
- .pmc_mask = 1 << AT91_ID_US3,
- .mode = pmc_periph_mode,
-};
-static struct clk spi_clk = {
- .name = "spi0_clk",
- .parent = &mck,
- .pmc_mask = 1 << AT91_ID_SPI,
- .mode = pmc_periph_mode,
-};
-static struct clk pioA_clk = {
- .name = "pioA_clk",
- .parent = &mck,
- .pmc_mask = 1 << AT91_ID_PIOA,
- .mode = pmc_periph_mode,
-};
-static struct clk pioB_clk = {
- .name = "pioB_clk",
- .parent = &mck,
- .pmc_mask = 1 << AT91_ID_PIOB,
- .mode = pmc_periph_mode,
-};
-static struct clk pioC_clk = {
- .name = "pioC_clk",
- .parent = &mck,
- .pmc_mask = 1 << AT91_ID_PIOC,
- .mode = pmc_periph_mode,
-};
-static struct clk pioD_clk = {
- .name = "pioD_clk",
- .parent = &mck,
- .pmc_mask = 1 << AT91_ID_PIOD,
- .mode = pmc_periph_mode,
-};
-
-static struct clk *const clock_list[] = {
- /* four primary clocks -- MUST BE FIRST! */
- &clk32k,
- &main_clk,
- &plla,
- &pllb,
-
- /* PLLB children (USB) */
- &udpck,
- &uhpck,
-
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
- /* programmable clocks */
- &pck0,
- &pck1,
- &pck2,
- &pck3,
-#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
-
- /* MCK and peripherals */
- &mck,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &usart3_clk,
- &mmc_clk,
- &udc_clk,
- &twi_clk,
- &spi_clk,
- &pioA_clk,
- &pioB_clk,
- &pioC_clk,
- &pioD_clk,
- // ssc0..ssc2
- // tc0..tc5
- // irq0..irq6
- &ohci_clk,
- &ether_clk,
-};
+static struct clk __init *at91_css_to_clk(unsigned long css)
+{
+ switch (css) {
+ case AT91_PMC_CSS_SLOW:
+ return &clk32k;
+ case AT91_PMC_CSS_MAIN:
+ return &main_clk;
+ case AT91_PMC_CSS_PLLA:
+ return &plla;
+ case AT91_PMC_CSS_PLLB:
+ return &pllb;
+ }
+ return NULL;
+}
/*
* Associate a particular clock with a function (eg, "uart") and device.
@@ -329,14 +175,12 @@ void __init at91_clock_associate(const char *id, struct device *dev, const char
clk->dev = dev;
}
-/* clocks are all static for now; no refcounting necessary */
+/* clocks cannot be de-registered no refcounting necessary */
struct clk *clk_get(struct device *dev, const char *id)
{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(clock_list); i++) {
- struct clk *clk = clock_list[i];
+ struct clk *clk;
+ list_for_each_entry(clk, &clocks, node) {
if (strcmp(id, clk->name) == 0)
return clk;
if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0)
@@ -424,7 +268,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
unsigned prescale;
unsigned long actual;
- if (!clk->programmable)
+ if (!clk_is_programmable(clk))
return -EINVAL;
spin_lock_irqsave(&clk_lock, flags);
@@ -446,7 +290,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
unsigned prescale;
unsigned long actual;
- if (!clk->programmable)
+ if (!clk_is_programmable(clk))
return -EINVAL;
if (clk->users)
return -EBUSY;
@@ -484,7 +328,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
if (clk->users)
return -EBUSY;
- if (!parent->primary || !clk->programmable)
+ if (!clk_is_primary(parent) || !clk_is_programmable(clk))
return -EINVAL;
spin_lock_irqsave(&clk_lock, flags);
@@ -497,6 +341,18 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
}
EXPORT_SYMBOL(clk_set_parent);
+/* establish PCK0..PCK3 parentage and rate */
+static void init_programmable_clock(struct clk *clk)
+{
+ struct clk *parent;
+ u32 pckr;
+
+ pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
+ parent = at91_css_to_clk(pckr & AT91_PMC_CSS);
+ clk->parent = parent;
+ clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3));
+}
+
#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
/*------------------------------------------------------------------------*/
@@ -506,6 +362,7 @@ EXPORT_SYMBOL(clk_set_parent);
static int at91_clk_show(struct seq_file *s, void *unused)
{
u32 scsr, pcsr, sr;
+ struct clk *clk;
unsigned i;
seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
@@ -523,9 +380,8 @@ static int at91_clk_show(struct seq_file *s, void *unused)
seq_printf(s, "\n");
- for (i = 0; i < ARRAY_SIZE(clock_list); i++) {
- char *state;
- struct clk *clk = clock_list[i];
+ list_for_each_entry(clk, &clocks, node) {
+ char *state;
if (clk->mode == pmc_sys_mode)
state = (scsr & clk->pmc_mask) ? "on" : "off";
@@ -570,6 +426,28 @@ postcore_initcall(at91_clk_debugfs_init);
/*------------------------------------------------------------------------*/
+/* Register a new clock */
+int __init clk_register(struct clk *clk)
+{
+ if (clk_is_peripheral(clk)) {
+ clk->parent = &mck;
+ clk->mode = pmc_periph_mode;
+ list_add_tail(&clk->node, &clocks);
+ }
+#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+ else if (clk_is_programmable(clk)) {
+ clk->mode = pmc_sys_mode;
+ init_programmable_clock(clk);
+ list_add_tail(&clk->node, &clocks);
+ }
+#endif
+
+ return 0;
+}
+
+
+/*------------------------------------------------------------------------*/
+
static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
{
unsigned mul, div;
@@ -640,20 +518,17 @@ fail:
return 0;
}
-
/*
* Several unused clocks may be active. Turn them off.
*/
-static void at91_periphclk_reset(void)
+static void __init at91_periphclk_reset(void)
{
unsigned long reg;
- int i;
+ struct clk *clk;
reg = at91_sys_read(AT91_PMC_PCSR);
- for (i = 0; i < ARRAY_SIZE(clock_list); i++) {
- struct clk *clk = clock_list[i];
-
+ list_for_each_entry(clk, &clocks, node) {
if (clk->mode != pmc_periph_mode)
continue;
@@ -664,11 +539,25 @@ static void at91_periphclk_reset(void)
at91_sys_write(AT91_PMC_PCDR, reg);
}
+static struct clk *const standard_pmc_clocks[] __initdata = {
+ /* four primary clocks */
+ &clk32k,
+ &main_clk,
+ &plla,
+ &pllb,
+
+ /* PLLB children (USB) */
+ &udpck,
+ &uhpck,
+
+ /* MCK */
+ &mck
+};
+
int __init at91_clock_init(unsigned long main_clock)
{
unsigned tmp, freq, mckr;
-
- spin_lock_init(&clk_lock);
+ int i;
/*
* When the bootloader initialized the main oscillator correctly,
@@ -709,11 +598,15 @@ int __init at91_clock_init(unsigned long main_clock)
* For now, assume this parentage won't change.
*/
mckr = at91_sys_read(AT91_PMC_MCKR);
- mck.parent = clock_list[mckr & AT91_PMC_CSS];
+ mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
freq = mck.parent->rate_hz;
freq /= (1 << ((mckr >> 2) & 3)); /* prescale */
mck.rate_hz = freq / (1 + ((mckr >> 8) & 3)); /* mdiv */
+ /* Register the PMC's standard clocks */
+ for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
+ list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
+
/* MCK and CPU clock are "always on" */
clk_enable(&mck);
@@ -722,35 +615,8 @@ int __init at91_clock_init(unsigned long main_clock)
(unsigned) main_clock / 1000000,
((unsigned) main_clock % 1000000) / 1000);
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
- /* establish PCK0..PCK3 parentage */
- for (tmp = 0; tmp < ARRAY_SIZE(clock_list); tmp++) {
- struct clk *clk = clock_list[tmp], *parent;
- u32 pckr;
-
- if (!clk->programmable)
- continue;
-
- pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
- parent = clock_list[pckr & AT91_PMC_CSS];
- clk->parent = parent;
- clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3));
-
- if (clk->users == 0) {
- /* not being used, so switch it off */
- at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
- }
- }
-#else
/* disable all programmable clocks */
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
-#endif
-
- /* enable the PIO clocks */
- clk_enable(&pioA_clk);
- clk_enable(&pioB_clk);
- clk_enable(&pioC_clk);
- clk_enable(&pioD_clk);
/* disable all other unused peripheral clocks */
at91_periphclk_reset();
diff --git a/arch/arm/mach-at91rm9200/clock.h b/arch/arm/mach-at91rm9200/clock.h
new file mode 100644
index 00000000000..0592e662ab3
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/clock.h
@@ -0,0 +1,30 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/clock.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define CLK_TYPE_PRIMARY 0x1
+#define CLK_TYPE_PLL 0x2
+#define CLK_TYPE_PROGRAMMABLE 0x4
+#define CLK_TYPE_PERIPHERAL 0x8
+
+
+struct clk {
+ struct list_head node;
+ const char *name; /* unique clock name */
+ const char *function; /* function of the clock */
+ struct device *dev; /* device associated with function */
+ unsigned long rate_hz;
+ struct clk *parent;
+ u32 pmc_mask;
+ void (*mode)(struct clk *, int);
+ unsigned id:2; /* PCK0..3, or 32k/main/a/b */
+ unsigned type; /* clock type */
+ u16 users;
+};
+
+
+extern int __init clk_register(struct clk *clk);
diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c
index 4352acb8817..01525530c28 100644
--- a/arch/arm/mach-at91rm9200/devices.c
+++ b/arch/arm/mach-at91rm9200/devices.c
@@ -35,13 +35,13 @@ static struct at91_usbh_data usbh_data;
static struct resource at91_usbh_resources[] = {
[0] = {
- .start = AT91_UHP_BASE,
- .end = AT91_UHP_BASE + SZ_1M - 1,
+ .start = AT91RM9200_UHP_BASE,
+ .end = AT91RM9200_UHP_BASE + SZ_1M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_UHP,
- .end = AT91_ID_UHP,
+ .start = AT91RM9200_ID_UHP,
+ .end = AT91RM9200_ID_UHP,
.flags = IORESOURCE_IRQ,
},
};
@@ -80,13 +80,13 @@ static struct at91_udc_data udc_data;
static struct resource at91_udc_resources[] = {
[0] = {
- .start = AT91_BASE_UDP,
- .end = AT91_BASE_UDP + SZ_16K - 1,
+ .start = AT91RM9200_BASE_UDP,
+ .end = AT91RM9200_BASE_UDP + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_UDP,
- .end = AT91_ID_UDP,
+ .start = AT91RM9200_ID_UDP,
+ .end = AT91RM9200_ID_UDP,
.flags = IORESOURCE_IRQ,
},
};
@@ -131,13 +131,13 @@ static struct at91_eth_data eth_data;
static struct resource at91_eth_resources[] = {
[0] = {
- .start = AT91_BASE_EMAC,
- .end = AT91_BASE_EMAC + SZ_16K - 1,
+ .start = AT91_VA_BASE_EMAC,
+ .end = AT91_VA_BASE_EMAC + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_EMAC,
- .end = AT91_ID_EMAC,
+ .start = AT91RM9200_ID_EMAC,
+ .end = AT91RM9200_ID_EMAC,
.flags = IORESOURCE_IRQ,
},
};
@@ -263,13 +263,13 @@ static struct at91_mmc_data mmc_data;
static struct resource at91_mmc_resources[] = {
[0] = {
- .start = AT91_BASE_MCI,
- .end = AT91_BASE_MCI + SZ_16K - 1,
+ .start = AT91RM9200_BASE_MCI,
+ .end = AT91RM9200_BASE_MCI + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_MCI,
- .end = AT91_ID_MCI,
+ .start = AT91RM9200_ID_MCI,
+ .end = AT91RM9200_ID_MCI,
.flags = IORESOURCE_IRQ,
},
};
@@ -423,13 +423,13 @@ static u64 spi_dmamask = 0xffffffffUL;
static struct resource at91_spi_resources[] = {
[0] = {
- .start = AT91_BASE_SPI,
- .end = AT91_BASE_SPI + SZ_16K - 1,
+ .start = AT91RM9200_BASE_SPI,
+ .end = AT91RM9200_BASE_SPI + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_SPI,
- .end = AT91_ID_SPI,
+ .start = AT91RM9200_ID_SPI,
+ .end = AT91RM9200_ID_SPI,
.flags = IORESOURCE_IRQ,
},
};
@@ -582,13 +582,13 @@ static inline void configure_dbgu_pins(void)
static struct resource uart0_resources[] = {
[0] = {
- .start = AT91_BASE_US0,
- .end = AT91_BASE_US0 + SZ_16K - 1,
+ .start = AT91RM9200_BASE_US0,
+ .end = AT91RM9200_BASE_US0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_US0,
- .end = AT91_ID_US0,
+ .start = AT91RM9200_ID_US0,
+ .end = AT91RM9200_ID_US0,
.flags = IORESOURCE_IRQ,
},
};
@@ -624,13 +624,13 @@ static inline void configure_usart0_pins(void)
static struct resource uart1_resources[] = {
[0] = {
- .start = AT91_BASE_US1,
- .end = AT91_BASE_US1 + SZ_16K - 1,
+ .start = AT91RM9200_BASE_US1,
+ .end = AT91RM9200_BASE_US1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_US1,
- .end = AT91_ID_US1,
+ .start = AT91RM9200_ID_US1,
+ .end = AT91RM9200_ID_US1,
.flags = IORESOURCE_IRQ,
},
};
@@ -665,13 +665,13 @@ static inline void configure_usart1_pins(void)
static struct resource uart2_resources[] = {
[0] = {
- .start = AT91_BASE_US2,
- .end = AT91_BASE_US2 + SZ_16K - 1,
+ .start = AT91RM9200_BASE_US2,
+ .end = AT91RM9200_BASE_US2 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_US2,
- .end = AT91_ID_US2,
+ .start = AT91RM9200_ID_US2,
+ .end = AT91RM9200_ID_US2,
.flags = IORESOURCE_IRQ,
},
};
@@ -700,13 +700,13 @@ static inline void configure_usart2_pins(void)
static struct resource uart3_resources[] = {
[0] = {
- .start = AT91_BASE_US3,
- .end = AT91_BASE_US3 + SZ_16K - 1,
+ .start = AT91RM9200_BASE_US3,
+ .end = AT91RM9200_BASE_US3 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_ID_US3,
- .end = AT91_ID_US3,
+ .start = AT91RM9200_ID_US3,
+ .end = AT91RM9200_ID_US3,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-at91rm9200/generic.h b/arch/arm/mach-at91rm9200/generic.h
index 7979d8ab7e0..694e411e285 100644
--- a/arch/arm/mach-at91rm9200/generic.h
+++ b/arch/arm/mach-at91rm9200/generic.h
@@ -8,18 +8,17 @@
* published by the Free Software Foundation.
*/
+ /* Processors */
+extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
+
/* Interrupts */
-extern void __init at91rm9200_init_irq(unsigned int priority[]);
+extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
-extern void __init at91_gpio_irq_setup(unsigned banks);
/* Timer */
struct sys_timer;
extern struct sys_timer at91rm9200_timer;
- /* Memory Map */
-extern void __init at91rm9200_map_io(void);
-
/* Clocks */
extern int __init at91_clock_init(unsigned long main_clock);
struct device;
@@ -29,3 +28,14 @@ extern void __init at91_clock_associate(const char *id, struct device *dev, cons
extern void at91_irq_suspend(void);
extern void at91_irq_resume(void);
+ /* GPIO */
+#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
+#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */
+
+struct at91_gpio_bank {
+ unsigned short id; /* peripheral ID */
+ unsigned long offset; /* offset from system peripheral base */
+ struct clk *clock; /* associated clock */
+};
+extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
+extern void __init at91_gpio_irq_setup(void);
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c
index cec199fd672..58c9bf5e952 100644
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ b/arch/arm/mach-at91rm9200/gpio.c
@@ -9,6 +9,7 @@
* (at your option) any later version.
*/
+#include <linux/clk.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -20,12 +21,12 @@
#include <asm/hardware.h>
#include <asm/arch/gpio.h>
-static const u32 pio_controller_offset[4] = {
- AT91_PIOA,
- AT91_PIOB,
- AT91_PIOC,
- AT91_PIOD,
-};
+#include "generic.h"
+
+
+static struct at91_gpio_bank *gpio;
+static int gpio_banks;
+
static inline void __iomem *pin_to_controller(unsigned pin)
{
@@ -33,8 +34,8 @@ static inline void __iomem *pin_to_controller(unsigned pin)
pin -= PIN_BASE;
pin /= 32;
- if (likely(pin < BGA_GPIO_BANKS))
- return sys_base + pio_controller_offset[pin];
+ if (likely(pin < gpio_banks))
+ return sys_base + gpio[pin].offset;
return NULL;
}
@@ -179,7 +180,6 @@ EXPORT_SYMBOL(at91_set_multi_drive);
/*--------------------------------------------------------------------------*/
-
/*
* assuming the pin is muxed as a gpio output, set its value.
*/
@@ -216,8 +216,8 @@ EXPORT_SYMBOL(at91_get_gpio_value);
#ifdef CONFIG_PM
-static u32 wakeups[BGA_GPIO_BANKS];
-static u32 backups[BGA_GPIO_BANKS];
+static u32 wakeups[MAX_GPIO_BANKS];
+static u32 backups[MAX_GPIO_BANKS];
static int gpio_irq_set_wake(unsigned pin, unsigned state)
{
@@ -226,7 +226,7 @@ static int gpio_irq_set_wake(unsigned pin, unsigned state)
pin -= PIN_BASE;
pin /= 32;
- if (unlikely(pin >= BGA_GPIO_BANKS))
+ if (unlikely(pin >= MAX_GPIO_BANKS))
return -EINVAL;
if (state)
@@ -241,8 +241,8 @@ void at91_gpio_suspend(void)
{
int i;
- for (i = 0; i < BGA_GPIO_BANKS; i++) {
- u32 pio = pio_controller_offset[i];
+ for (i = 0; i < gpio_banks; i++) {
+ u32 pio = gpio[i].offset;
/*
* Note: drivers should have disabled GPIO interrupts that
@@ -257,14 +257,14 @@ void at91_gpio_suspend(void)
* first place!
*/
backups[i] = at91_sys_read(pio + PIO_IMR);
- at91_sys_write(pio_controller_offset[i] + PIO_IDR, backups[i]);
- at91_sys_write(pio_controller_offset[i] + PIO_IER, wakeups[i]);
+ at91_sys_write(pio + PIO_IDR, backups[i]);
+ at91_sys_write(pio + PIO_IER, wakeups[i]);
if (!wakeups[i]) {
- disable_irq_wake(AT91_ID_PIOA + i);
- at91_sys_write(AT91_PMC_PCDR, 1 << (AT91_ID_PIOA + i));
+ disable_irq_wake(gpio[i].id);
+ at91_sys_write(AT91_PMC_PCDR, 1 << gpio[i].id);
} else {
- enable_irq_wake(AT91_ID_PIOA + i);
+ enable_irq_wake(gpio[i].id);
#ifdef CONFIG_PM_DEBUG
printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", "ABCD"[i], wakeups[i]);
#endif
@@ -276,16 +276,13 @@ void at91_gpio_resume(void)
{
int i;
- for (i = 0; i < BGA_GPIO_BANKS; i++) {
- at91_sys_write(pio_controller_offset[i] + PIO_IDR, wakeups[i]);
- at91_sys_write(pio_controller_offset[i] + PIO_IER, backups[i]);
- }
+ for (i = 0; i < gpio_banks; i++) {
+ u32 pio = gpio[i].offset;
- at91_sys_write(AT91_PMC_PCER,
- (1 << AT91_ID_PIOA)
- | (1 << AT91_ID_PIOB)
- | (1 << AT91_ID_PIOC)
- | (1 << AT91_ID_PIOD));
+ at91_sys_write(pio + PIO_IDR, wakeups[i]);
+ at91_sys_write(pio + PIO_IER, backups[i]);
+ at91_sys_write(AT91_PMC_PCER, 1 << gpio[i].id);
+ }
}
#else
@@ -377,20 +374,25 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs
/* now it may re-trigger */
}
-/* call this from board-specific init_irq */
-void __init at91_gpio_irq_setup(unsigned banks)
+/*--------------------------------------------------------------------------*/
+
+/*
+ * Called from the processor-specific init to enable GPIO interrupt support.
+ */
+void __init at91_gpio_irq_setup(void)
{
- unsigned pioc, pin, id;
+ unsigned pioc, pin;
- if (banks > 4)
- banks = 4;
- for (pioc = 0, pin = PIN_BASE, id = AT91_ID_PIOA;
- pioc < banks;
- pioc++, id++) {
+ for (pioc = 0, pin = PIN_BASE;
+ pioc < gpio_banks;
+ pioc++) {
void __iomem *controller;
+ unsigned id = gpio[pioc].id;
unsigned i;
- controller = (void __iomem *) AT91_VA_BASE_SYS + pio_controller_offset[pioc];
+ clk_enable(gpio[pioc].clock); /* enable PIO controller's clock */
+
+ controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset;
__raw_writel(~0, controller + PIO_IDR);
set_irq_data(id, (void *) pin);
@@ -408,5 +410,16 @@ void __init at91_gpio_irq_setup(unsigned banks)
set_irq_chained_handler(id, gpio_irq_handler);
}
- pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, banks);
+ pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
+}
+
+/*
+ * Called from the processor-specific init to enable GPIO pin support.
+ */
+void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
+{
+ BUG_ON(nr_banks > MAX_GPIO_BANKS);
+
+ gpio = data;
+ gpio_banks = nr_banks;
}
diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c
index c3a5e777f9f..3e488117ca9 100644
--- a/arch/arm/mach-at91rm9200/irq.c
+++ b/arch/arm/mach-at91rm9200/irq.c
@@ -34,8 +34,6 @@
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
-#include "generic.h"
-
static void at91_aic_mask_irq(unsigned int irq)
{
@@ -61,12 +59,12 @@ static int at91_aic_set_type(unsigned irq, unsigned type)
srctype = AT91_AIC_SRCTYPE_RISING;
break;
case IRQT_LOW:
- if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0)) /* only supported on external interrupts */
+ if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0)) /* only supported on external interrupts */
return -EINVAL;
srctype = AT91_AIC_SRCTYPE_LOW;
break;
case IRQT_FALLING:
- if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0)) /* only supported on external interrupts */
+ if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0)) /* only supported on external interrupts */
return -EINVAL;
srctype = AT91_AIC_SRCTYPE_FALLING;
break;
diff --git a/arch/arm/mach-at91rm9200/pm.c b/arch/arm/mach-at91rm9200/pm.c
index 47e5480feb7..32c95d8eaac 100644
--- a/arch/arm/mach-at91rm9200/pm.c
+++ b/arch/arm/mach-at91rm9200/pm.c
@@ -123,13 +123,13 @@ static int at91_pm_enter(suspend_state_t state)
(at91_sys_read(AT91_PMC_PCSR)
| (1 << AT91_ID_FIQ)
| (1 << AT91_ID_SYS)
- | (1 << AT91_ID_IRQ0)
- | (1 << AT91_ID_IRQ1)
- | (1 << AT91_ID_IRQ2)
- | (1 << AT91_ID_IRQ3)
- | (1 << AT91_ID_IRQ4)
- | (1 << AT91_ID_IRQ5)
- | (1 << AT91_ID_IRQ6))
+ | (1 << AT91RM9200_ID_IRQ0)
+ | (1 << AT91RM9200_ID_IRQ1)
+ | (1 << AT91RM9200_ID_IRQ2)
+ | (1 << AT91RM9200_ID_IRQ3)
+ | (1 << AT91RM9200_ID_IRQ4)
+ | (1 << AT91RM9200_ID_IRQ5)
+ | (1 << AT91RM9200_ID_IRQ6))
& at91_sys_read(AT91_AIC_IMR),
state);
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index f1b740083ae..e346b03cd92 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -15,6 +15,12 @@ config MACH_EDB9302
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9302 Evaluation Board.
+config MACH_EDB9312
+ bool "Support Cirrus Logic EDB9312"
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9312 Evaluation Board.
+
config MACH_EDB9315
bool "Support Cirrus Logic EDB9315"
help
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 1f5a6b0487e..c2eb18b530c 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -7,6 +7,7 @@ obj-n :=
obj- :=
obj-$(CONFIG_MACH_EDB9302) += edb9302.o
+obj-$(CONFIG_MACH_EDB9312) += edb9312.o
obj-$(CONFIG_MACH_EDB9315) += edb9315.o
obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
new file mode 100644
index 00000000000..9e399211108
--- /dev/null
+++ b/arch/arm/mach-ep93xx/edb9312.c
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/mach-ep93xx/edb9312.c
+ * Cirrus Logic EDB9312 support.
+ *
+ * Copyright (C) 2006 Infosys Technologies Limited
+ * Toufeeq Hussain <toufeeq_hussain@infosys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9312_flash_data = {
+ .width = 4,
+};
+
+static struct resource edb9312_flash_resource = {
+ .start = 0x60000000,
+ .end = 0x61ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device edb9312_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &edb9312_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &edb9312_flash_resource,
+};
+
+static void __init edb9312_init_machine(void)
+{
+ ep93xx_init_devices();
+ platform_device_register(&edb9312_flash);
+}
+
+MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
+ /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb9312_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index 823e25d4547..a1ae49df5c3 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -69,16 +69,16 @@ dc21285_read_config(struct pci_bus *bus, unsigned int devfn, int where,
if (addr)
switch (size) {
case 1:
- asm("ldr%?b %0, [%1, %2]"
- : "=r" (v) : "r" (addr), "r" (where));
+ asm("ldrb %0, [%1, %2]"
+ : "=r" (v) : "r" (addr), "r" (where) : "cc");
break;
case 2:
- asm("ldr%?h %0, [%1, %2]"
- : "=r" (v) : "r" (addr), "r" (where));
+ asm("ldrh %0, [%1, %2]"
+ : "=r" (v) : "r" (addr), "r" (where) : "cc");
break;
case 4:
- asm("ldr%? %0, [%1, %2]"
- : "=r" (v) : "r" (addr), "r" (where));
+ asm("ldr %0, [%1, %2]"
+ : "=r" (v) : "r" (addr), "r" (where) : "cc");
break;
}
@@ -103,16 +103,19 @@ dc21285_write_config(struct pci_bus *bus, unsigned int devfn, int where,
if (addr)
switch (size) {
case 1:
- asm("str%?b %0, [%1, %2]"
- : : "r" (value), "r" (addr), "r" (where));
+ asm("strb %0, [%1, %2]"
+ : : "r" (value), "r" (addr), "r" (where)
+ : "cc");
break;
case 2:
- asm("str%?h %0, [%1, %2]"
- : : "r" (value), "r" (addr), "r" (where));
+ asm("strh %0, [%1, %2]"
+ : : "r" (value), "r" (addr), "r" (where)
+ : "cc");
break;
case 4:
- asm("str%? %0, [%1, %2]"
- : : "r" (value), "r" (addr), "r" (where));
+ asm("str %0, [%1, %2]"
+ : : "r" (value), "r" (addr), "r" (where)
+ : "cc");
break;
}
diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig
new file mode 100644
index 00000000000..c072d94070d
--- /dev/null
+++ b/arch/arm/mach-iop32x/Kconfig
@@ -0,0 +1,35 @@
+if ARCH_IOP32X
+
+menu "IOP32x Implementation Options"
+
+comment "IOP32x Platform Types"
+
+config MACH_GLANTANK
+ bool "Enable support for the IO-Data GLAN Tank"
+ help
+ Say Y here if you want to run your kernel on the GLAN Tank
+ NAS appliance or machines from IO-Data's HDL-Gxxx, HDL-GWxxx
+ and HDL-GZxxx series.
+
+config ARCH_IQ80321
+ bool "Enable support for IQ80321"
+ help
+ Say Y here if you want to run your kernel on the Intel IQ80321
+ evaluation kit for the IOP321 processor.
+
+config ARCH_IQ31244
+ bool "Enable support for EP80219/IQ31244"
+ help
+ Say Y here if you want to run your kernel on the Intel EP80219
+ evaluation kit for the Intel 80219 processor (a IOP321 variant)
+ or the IQ31244 evaluation kit for the IOP321 processor.
+
+config MACH_N2100
+ bool "Enable support for the Thecus n2100"
+ help
+ Say Y here if you want to run your kernel on the Thecus n2100
+ NAS appliance.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile
new file mode 100644
index 00000000000..7b05b37e1f9
--- /dev/null
+++ b/arch/arm/mach-iop32x/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y := irq.o
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_MACH_GLANTANK) += glantank.o
+obj-$(CONFIG_ARCH_IQ80321) += iq80321.o
+obj-$(CONFIG_ARCH_IQ31244) += iq31244.o
+obj-$(CONFIG_MACH_N2100) += n2100.o
diff --git a/arch/arm/mach-iop32x/Makefile.boot b/arch/arm/mach-iop32x/Makefile.boot
new file mode 100644
index 00000000000..47000dccd61
--- /dev/null
+++ b/arch/arm/mach-iop32x/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0xa0008000
+params_phys-y := 0xa0000100
+initrd_phys-y := 0xa0800000
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
new file mode 100644
index 00000000000..b9b765057db
--- /dev/null
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -0,0 +1,195 @@
+/*
+ * arch/arm/mach-iop32x/glantank.c
+ *
+ * Board support code for the GLAN Tank.
+ *
+ * Copyright (C) 2006 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+
+/*
+ * GLAN Tank timer tick configuration.
+ */
+static void __init glantank_timer_init(void)
+{
+ /* 33.333 MHz crystal. */
+ iop3xx_init_time(200000000);
+}
+
+static struct sys_timer glantank_timer = {
+ .init = glantank_timer_init,
+ .offset = iop3xx_gettimeoffset,
+};
+
+
+/*
+ * GLAN Tank I/O.
+ */
+static struct map_desc glantank_io_desc[] __initdata = {
+ { /* on-board devices */
+ .virtual = GLANTANK_UART,
+ .pfn = __phys_to_pfn(GLANTANK_UART),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ },
+};
+
+void __init glantank_map_io(void)
+{
+ iop3xx_map_io();
+ iotable_init(glantank_io_desc, ARRAY_SIZE(glantank_io_desc));
+}
+
+
+/*
+ * GLAN Tank PCI.
+ */
+#define INTA IRQ_IOP32X_XINT0
+#define INTB IRQ_IOP32X_XINT1
+#define INTC IRQ_IOP32X_XINT2
+#define INTD IRQ_IOP32X_XINT3
+
+static inline int __init
+glantank_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ static int pci_irq_table[][4] = {
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {INTD, INTD, INTD, INTD}, /* UART (8250) */
+ {INTA, INTA, INTA, INTA}, /* Ethernet (E1000) */
+ {INTB, INTB, INTB, INTB}, /* IDE (AEC6280R) */
+ {INTC, INTC, INTC, INTC}, /* USB (NEC) */
+ };
+
+ BUG_ON(pin < 1 || pin > 4);
+
+ return pci_irq_table[slot % 4][pin - 1];
+}
+
+static struct hw_pci glantank_pci __initdata = {
+ .swizzle = pci_std_swizzle,
+ .nr_controllers = 1,
+ .setup = iop3xx_pci_setup,
+ .preinit = iop3xx_pci_preinit,
+ .scan = iop3xx_pci_scan_bus,
+ .map_irq = glantank_pci_map_irq,
+};
+
+static int __init glantank_pci_init(void)
+{
+ if (machine_is_glantank())
+ pci_common_init(&glantank_pci);
+
+ return 0;
+}
+
+subsys_initcall(glantank_pci_init);
+
+
+/*
+ * GLAN Tank machine initialization.
+ */
+static struct physmap_flash_data glantank_flash_data = {
+ .width = 1,
+};
+
+static struct resource glantank_flash_resource = {
+ .start = 0xf0000000,
+ .end = 0xf007ffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device glantank_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &glantank_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &glantank_flash_resource,
+};
+
+static struct plat_serial8250_port glantank_serial_port[] = {
+ {
+ .mapbase = GLANTANK_UART,
+ .membase = (char *)GLANTANK_UART,
+ .irq = IRQ_IOP32X_XINT3,
+ .flags = UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = 1843200,
+ },
+ { },
+};
+
+static struct resource glantank_uart_resource = {
+ .start = GLANTANK_UART,
+ .end = GLANTANK_UART + 7,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device glantank_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = glantank_serial_port,
+ },
+ .num_resources = 1,
+ .resource = &glantank_uart_resource,
+};
+
+static void glantank_power_off(void)
+{
+ __raw_writeb(0x01, 0xfe8d0004);
+
+ while (1)
+ ;
+}
+
+static void __init glantank_init_machine(void)
+{
+ platform_device_register(&iop3xx_i2c0_device);
+ platform_device_register(&iop3xx_i2c1_device);
+ platform_device_register(&glantank_flash_device);
+ platform_device_register(&glantank_serial_device);
+
+ pm_power_off = glantank_power_off;
+}
+
+MACHINE_START(GLANTANK, "GLAN Tank")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = GLANTANK_UART,
+ .io_pg_offst = ((GLANTANK_UART) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = glantank_map_io,
+ .init_irq = iop32x_init_irq,
+ .timer = &glantank_timer,
+ .init_machine = glantank_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
new file mode 100644
index 00000000000..be4aedfa0de
--- /dev/null
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -0,0 +1,293 @@
+/*
+ * arch/arm/mach-iop32x/iq31244.c
+ *
+ * Board support code for the Intel EP80219 and IQ31244 platforms.
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright 2003 (c) MontaVista, Software, Inc.
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+
+/*
+ * The EP80219 and IQ31244 use the same machine ID. To find out
+ * which of the two we're running on, we look at the processor ID.
+ */
+static int is_80219(void)
+{
+ extern int processor_id;
+ return !!((processor_id & 0xffffffe0) == 0x69052e20);
+}
+
+
+/*
+ * EP80219/IQ31244 timer tick configuration.
+ */
+static void __init iq31244_timer_init(void)
+{
+ if (is_80219()) {
+ /* 33.333 MHz crystal. */
+ iop3xx_init_time(200000000);
+ } else {
+ /* 33.000 MHz crystal. */
+ iop3xx_init_time(198000000);
+ }
+}
+
+static struct sys_timer iq31244_timer = {
+ .init = iq31244_timer_init,
+ .offset = iop3xx_gettimeoffset,
+};
+
+
+/*
+ * IQ31244 I/O.
+ */
+static struct map_desc iq31244_io_desc[] __initdata = {
+ { /* on-board devices */
+ .virtual = IQ31244_UART,
+ .pfn = __phys_to_pfn(IQ31244_UART),
+ .length = 0x00100000,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init iq31244_map_io(void)
+{
+ iop3xx_map_io();
+ iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
+}
+
+
+/*
+ * EP80219/IQ31244 PCI.
+ */
+static inline int __init
+ep80219_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ if (slot == 0) {
+ /* CFlash */
+ irq = IRQ_IOP32X_XINT1;
+ } else if (slot == 1) {
+ /* 82551 Pro 100 */
+ irq = IRQ_IOP32X_XINT0;
+ } else if (slot == 2) {
+ /* PCI-X Slot */
+ irq = IRQ_IOP32X_XINT3;
+ } else if (slot == 3) {
+ /* SATA */
+ irq = IRQ_IOP32X_XINT2;
+ } else {
+ printk(KERN_ERR "ep80219_pci_map_irq() called for unknown "
+ "device PCI:%d:%d:%d\n", dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ irq = -1;
+ }
+
+ return irq;
+}
+
+static struct hw_pci ep80219_pci __initdata = {
+ .swizzle = pci_std_swizzle,
+ .nr_controllers = 1,
+ .setup = iop3xx_pci_setup,
+ .preinit = iop3xx_pci_preinit,
+ .scan = iop3xx_pci_scan_bus,
+ .map_irq = ep80219_pci_map_irq,
+};
+
+static inline int __init
+iq31244_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ if (slot == 0) {
+ /* CFlash */
+ irq = IRQ_IOP32X_XINT1;
+ } else if (slot == 1) {
+ /* SATA */
+ irq = IRQ_IOP32X_XINT2;
+ } else if (slot == 2) {
+ /* PCI-X Slot */
+ irq = IRQ_IOP32X_XINT3;
+ } else if (slot == 3) {
+ /* 82546 GigE */
+ irq = IRQ_IOP32X_XINT0;
+ } else {
+ printk(KERN_ERR "iq31244_pci_map_irq called for unknown "
+ "device PCI:%d:%d:%d\n", dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ irq = -1;
+ }
+
+ return irq;
+}
+
+static struct hw_pci iq31244_pci __initdata = {
+ .swizzle = pci_std_swizzle,
+ .nr_controllers = 1,
+ .setup = iop3xx_pci_setup,
+ .preinit = iop3xx_pci_preinit,
+ .scan = iop3xx_pci_scan_bus,
+ .map_irq = iq31244_pci_map_irq,
+};
+
+static int __init iq31244_pci_init(void)
+{
+ if (machine_is_iq31244()) {
+ if (is_80219()) {
+ pci_common_init(&ep80219_pci);
+ } else {
+ pci_common_init(&iq31244_pci);
+ }
+ }
+
+ return 0;
+}
+
+subsys_initcall(iq31244_pci_init);
+
+
+/*
+ * IQ31244 machine initialisation.
+ */
+static struct physmap_flash_data iq31244_flash_data = {
+ .width = 2,
+};
+
+static struct resource iq31244_flash_resource = {
+ .start = 0xf0000000,
+ .end = 0xf07fffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device iq31244_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &iq31244_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &iq31244_flash_resource,
+};
+
+static struct plat_serial8250_port iq31244_serial_port[] = {
+ {
+ .mapbase = IQ31244_UART,
+ .membase = (char *)IQ31244_UART,
+ .irq = IRQ_IOP32X_XINT1,
+ .flags = UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = 1843200,
+ },
+ { },
+};
+
+static struct resource iq31244_uart_resource = {
+ .start = IQ31244_UART,
+ .end = IQ31244_UART + 7,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device iq31244_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = iq31244_serial_port,
+ },
+ .num_resources = 1,
+ .resource = &iq31244_uart_resource,
+};
+
+/*
+ * This function will send a SHUTDOWN_COMPLETE message to the PIC
+ * controller over I2C. We are not using the i2c subsystem since
+ * we are going to power off and it may be removed
+ */
+void ep80219_power_off(void)
+{
+ /*
+ * Send the Address byte w/ the start condition
+ */
+ *IOP3XX_IDBR1 = 0x60;
+ *IOP3XX_ICR1 = 0xE9;
+ mdelay(1);
+
+ /*
+ * Send the START_MSG byte w/ no start or stop condition
+ */
+ *IOP3XX_IDBR1 = 0x0F;
+ *IOP3XX_ICR1 = 0xE8;
+ mdelay(1);
+
+ /*
+ * Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or
+ * stop condition
+ */
+ *IOP3XX_IDBR1 = 0x03;
+ *IOP3XX_ICR1 = 0xE8;
+ mdelay(1);
+
+ /*
+ * Send an ignored byte w/ stop condition
+ */
+ *IOP3XX_IDBR1 = 0x00;
+ *IOP3XX_ICR1 = 0xEA;
+
+ while (1)
+ ;
+}
+
+static void __init iq31244_init_machine(void)
+{
+ platform_device_register(&iop3xx_i2c0_device);
+ platform_device_register(&iop3xx_i2c1_device);
+ platform_device_register(&iq31244_flash_device);
+ platform_device_register(&iq31244_serial_device);
+
+ if (is_80219())
+ pm_power_off = ep80219_power_off;
+}
+
+MACHINE_START(IQ31244, "Intel IQ31244")
+ /* Maintainer: Intel Corp. */
+ .phys_io = IQ31244_UART,
+ .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = iq31244_map_io,
+ .init_irq = iop32x_init_irq,
+ .timer = &iq31244_timer,
+ .init_machine = iq31244_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
new file mode 100644
index 00000000000..1f37b550188
--- /dev/null
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -0,0 +1,193 @@
+/*
+ * arch/arm/mach-iop32x/iq80321.c
+ *
+ * Board support code for the Intel IQ80321 platform.
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/*
+ * IQ80321 timer tick configuration.
+ */
+static void __init iq80321_timer_init(void)
+{
+ /* 33.333 MHz crystal. */
+ iop3xx_init_time(200000000);
+}
+
+static struct sys_timer iq80321_timer = {
+ .init = iq80321_timer_init,
+ .offset = iop3xx_gettimeoffset,
+};
+
+
+/*
+ * IQ80321 I/O.
+ */
+static struct map_desc iq80321_io_desc[] __initdata = {
+ { /* on-board devices */
+ .virtual = IQ80321_UART,
+ .pfn = __phys_to_pfn(IQ80321_UART),
+ .length = 0x00100000,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init iq80321_map_io(void)
+{
+ iop3xx_map_io();
+ iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
+}
+
+
+/*
+ * IQ80321 PCI.
+ */
+static inline int __init
+iq80321_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ if ((slot == 2 || slot == 6) && pin == 1) {
+ /* PCI-X Slot INTA */
+ irq = IRQ_IOP32X_XINT2;
+ } else if ((slot == 2 || slot == 6) && pin == 2) {
+ /* PCI-X Slot INTA */
+ irq = IRQ_IOP32X_XINT3;
+ } else if ((slot == 2 || slot == 6) && pin == 3) {
+ /* PCI-X Slot INTA */
+ irq = IRQ_IOP32X_XINT0;
+ } else if ((slot == 2 || slot == 6) && pin == 4) {
+ /* PCI-X Slot INTA */
+ irq = IRQ_IOP32X_XINT1;
+ } else if (slot == 4 || slot == 8) {
+ /* Gig-E */
+ irq = IRQ_IOP32X_XINT0;
+ } else {
+ printk(KERN_ERR "iq80321_pci_map_irq() called for unknown "
+ "device PCI:%d:%d:%d\n", dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ irq = -1;
+ }
+
+ return irq;
+}
+
+static struct hw_pci iq80321_pci __initdata = {
+ .swizzle = pci_std_swizzle,
+ .nr_controllers = 1,
+ .setup = iop3xx_pci_setup,
+ .preinit = iop3xx_pci_preinit,
+ .scan = iop3xx_pci_scan_bus,
+ .map_irq = iq80321_pci_map_irq,
+};
+
+static int __init iq80321_pci_init(void)
+{
+ if (machine_is_iq80321())
+ pci_common_init(&iq80321_pci);
+
+ return 0;
+}
+
+subsys_initcall(iq80321_pci_init);
+
+
+/*
+ * IQ80321 machine initialisation.
+ */
+static struct physmap_flash_data iq80321_flash_data = {
+ .width = 1,
+};
+
+static struct resource iq80321_flash_resource = {
+ .start = 0xf0000000,
+ .end = 0xf07fffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device iq80321_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &iq80321_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &iq80321_flash_resource,
+};
+
+static struct plat_serial8250_port iq80321_serial_port[] = {
+ {
+ .mapbase = IQ80321_UART,
+ .membase = (char *)IQ80321_UART,
+ .irq = IRQ_IOP32X_XINT1,
+ .flags = UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = 1843200,
+ },
+ { },
+};
+
+static struct resource iq80321_uart_resource = {
+ .start = IQ80321_UART,
+ .end = IQ80321_UART + 7,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device iq80321_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = iq80321_serial_port,
+ },
+ .num_resources = 1,
+ .resource = &iq80321_uart_resource,
+};
+
+static void __init iq80321_init_machine(void)
+{
+ platform_device_register(&iop3xx_i2c0_device);
+ platform_device_register(&iop3xx_i2c1_device);
+ platform_device_register(&iq80321_flash_device);
+ platform_device_register(&iq80321_serial_device);
+}
+
+MACHINE_START(IQ80321, "Intel IQ80321")
+ /* Maintainer: Intel Corp. */
+ .phys_io = IQ80321_UART,
+ .io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = iq80321_map_io,
+ .init_irq = iop32x_init_irq,
+ .timer = &iq80321_timer,
+ .init_machine = iq80321_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
new file mode 100644
index 00000000000..69d6302f40c
--- /dev/null
+++ b/arch/arm/mach-iop32x/irq.c
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/mach-iop32x/irq.c
+ *
+ * Generic IOP32X IRQ handling functionality
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+
+static u32 iop32x_mask;
+
+static inline void intctl_write(u32 val)
+{
+ iop3xx_cp6_enable();
+ asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
+ iop3xx_cp6_disable();
+}
+
+static inline void intstr_write(u32 val)
+{
+ iop3xx_cp6_enable();
+ asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val));
+ iop3xx_cp6_disable();
+}
+
+static void
+iop32x_irq_mask(unsigned int irq)
+{
+ iop32x_mask &= ~(1 << irq);
+ intctl_write(iop32x_mask);
+}
+
+static void
+iop32x_irq_unmask(unsigned int irq)
+{
+ iop32x_mask |= 1 << irq;
+ intctl_write(iop32x_mask);
+}
+
+struct irq_chip ext_chip = {
+ .name = "IOP32x",
+ .ack = iop32x_irq_mask,
+ .mask = iop32x_irq_mask,
+ .unmask = iop32x_irq_unmask,
+};
+
+void __init iop32x_init_irq(void)
+{
+ int i;
+
+ intctl_write(0);
+ intstr_write(0);
+ if (machine_is_glantank() ||
+ machine_is_iq80321() ||
+ machine_is_iq31244() ||
+ machine_is_n2100())
+ *IOP3XX_PCIIRSR = 0x0f;
+
+ for (i = 0; i < NR_IRQS; i++) {
+ set_irq_chip(i, &ext_chip);
+ set_irq_handler(i, do_level_IRQ);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ }
+}
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
new file mode 100644
index 00000000000..a2c94a47b2b
--- /dev/null
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -0,0 +1,251 @@
+/*
+ * arch/arm/mach-iop32x/n2100.c
+ *
+ * Board support code for the Thecus N2100 platform.
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright 2003 (c) MontaVista, Software, Inc.
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/*
+ * N2100 timer tick configuration.
+ */
+static void __init n2100_timer_init(void)
+{
+ /* 33.000 MHz crystal. */
+ iop3xx_init_time(198000000);
+}
+
+static struct sys_timer n2100_timer = {
+ .init = n2100_timer_init,
+ .offset = iop3xx_gettimeoffset,
+};
+
+
+/*
+ * N2100 I/O.
+ */
+static struct map_desc n2100_io_desc[] __initdata = {
+ { /* on-board devices */
+ .virtual = N2100_UART,
+ .pfn = __phys_to_pfn(N2100_UART),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ },
+};
+
+void __init n2100_map_io(void)
+{
+ iop3xx_map_io();
+ iotable_init(n2100_io_desc, ARRAY_SIZE(n2100_io_desc));
+}
+
+
+/*
+ * N2100 PCI.
+ */
+static inline int __init
+n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ if (PCI_SLOT(dev->devfn) == 1) {
+ /* RTL8110SB #1 */
+ irq = IRQ_IOP32X_XINT0;
+ } else if (PCI_SLOT(dev->devfn) == 2) {
+ /* RTL8110SB #2 */
+ irq = IRQ_IOP32X_XINT1;
+ } else if (PCI_SLOT(dev->devfn) == 3) {
+ /* Sil3512 */
+ irq = IRQ_IOP32X_XINT2;
+ } else if (PCI_SLOT(dev->devfn) == 4 && pin == 1) {
+ /* VT6212 INTA */
+ irq = IRQ_IOP32X_XINT1;
+ } else if (PCI_SLOT(dev->devfn) == 4 && pin == 2) {
+ /* VT6212 INTB */
+ irq = IRQ_IOP32X_XINT0;
+ } else if (PCI_SLOT(dev->devfn) == 4 && pin == 3) {
+ /* VT6212 INTC */
+ irq = IRQ_IOP32X_XINT2;
+ } else if (PCI_SLOT(dev->devfn) == 5) {
+ /* Mini-PCI slot */
+ irq = IRQ_IOP32X_XINT3;
+ } else {
+ printk(KERN_ERR "n2100_pci_map_irq() called for unknown "
+ "device PCI:%d:%d:%d\n", dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ irq = -1;
+ }
+
+ return irq;
+}
+
+static struct hw_pci n2100_pci __initdata = {
+ .swizzle = pci_std_swizzle,
+ .nr_controllers = 1,
+ .setup = iop3xx_pci_setup,
+ .preinit = iop3xx_pci_preinit,
+ .scan = iop3xx_pci_scan_bus,
+ .map_irq = n2100_pci_map_irq,
+};
+
+static int __init n2100_pci_init(void)
+{
+ if (machine_is_n2100())
+ pci_common_init(&n2100_pci);
+
+ return 0;
+}
+
+subsys_initcall(n2100_pci_init);
+
+
+/*
+ * N2100 machine initialisation.
+ */
+static struct physmap_flash_data n2100_flash_data = {
+ .width = 2,
+};
+
+static struct resource n2100_flash_resource = {
+ .start = 0xf0000000,
+ .end = 0xf0ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device n2100_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &n2100_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &n2100_flash_resource,
+};
+
+
+static struct plat_serial8250_port n2100_serial_port[] = {
+ {
+ .mapbase = N2100_UART,
+ .membase = (char *)N2100_UART,
+ .irq = 0,
+ .flags = UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = 1843200,
+ },
+ { },
+};
+
+static struct resource n2100_uart_resource = {
+ .start = N2100_UART,
+ .end = N2100_UART + 7,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device n2100_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = n2100_serial_port,
+ },
+ .num_resources = 1,
+ .resource = &n2100_uart_resource,
+};
+
+
+/*
+ * Pull PCA9532 GPIO #8 low to power off the machine.
+ */
+static void n2100_power_off(void)
+{
+ local_irq_disable();
+
+ /* Start condition, I2C address of PCA9532, write transaction. */
+ *IOP3XX_IDBR0 = 0xc0;
+ *IOP3XX_ICR0 = 0xe9;
+ mdelay(1);
+
+ /* Write address 0x08. */
+ *IOP3XX_IDBR0 = 0x08;
+ *IOP3XX_ICR0 = 0xe8;
+ mdelay(1);
+
+ /* Write data 0x01, stop condition. */
+ *IOP3XX_IDBR0 = 0x01;
+ *IOP3XX_ICR0 = 0xea;
+
+ while (1)
+ ;
+}
+
+
+static struct timer_list power_button_poll_timer;
+
+static void power_button_poll(unsigned long dummy)
+{
+ if (gpio_line_get(N2100_POWER_BUTTON) == 0) {
+ ctrl_alt_del();
+ return;
+ }
+
+ power_button_poll_timer.expires = jiffies + (HZ / 10);
+ add_timer(&power_button_poll_timer);
+}
+
+
+static void __init n2100_init_machine(void)
+{
+ platform_device_register(&iop3xx_i2c0_device);
+ platform_device_register(&n2100_flash_device);
+ platform_device_register(&n2100_serial_device);
+
+ pm_power_off = n2100_power_off;
+
+ init_timer(&power_button_poll_timer);
+ power_button_poll_timer.function = power_button_poll;
+ power_button_poll_timer.expires = jiffies + (HZ / 10);
+ add_timer(&power_button_poll_timer);
+}
+
+MACHINE_START(N2100, "Thecus N2100")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = N2100_UART,
+ .io_pg_offst = ((N2100_UART) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = n2100_map_io,
+ .init_irq = iop32x_init_irq,
+ .timer = &n2100_timer,
+ .init_machine = n2100_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop33x/Kconfig b/arch/arm/mach-iop33x/Kconfig
new file mode 100644
index 00000000000..9aa016bb18f
--- /dev/null
+++ b/arch/arm/mach-iop33x/Kconfig
@@ -0,0 +1,21 @@
+if ARCH_IOP33X
+
+menu "IOP33x Implementation Options"
+
+comment "IOP33x Platform Types"
+
+config ARCH_IQ80331
+ bool "Enable support for IQ80331"
+ help
+ Say Y here if you want to run your kernel on the Intel IQ80331
+ evaluation kit for the IOP331 chipset.
+
+config MACH_IQ80332
+ bool "Enable support for IQ80332"
+ help
+ Say Y here if you want to run your kernel on the Intel IQ80332
+ evaluation kit for the IOP332 chipset.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile
new file mode 100644
index 00000000000..90081d8c9d1
--- /dev/null
+++ b/arch/arm/mach-iop33x/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y := irq.o uart.o
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_ARCH_IQ80331) += iq80331.o
+obj-$(CONFIG_MACH_IQ80332) += iq80332.o
diff --git a/arch/arm/mach-iop33x/Makefile.boot b/arch/arm/mach-iop33x/Makefile.boot
new file mode 100644
index 00000000000..67039c3e0c4
--- /dev/null
+++ b/arch/arm/mach-iop33x/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
new file mode 100644
index 00000000000..97a7b748826
--- /dev/null
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -0,0 +1,148 @@
+/*
+ * arch/arm/mach-iop33x/iq80331.c
+ *
+ * Board support code for the Intel IQ80331 platform.
+ *
+ * Author: Dave Jiang <dave.jiang@intel.com>
+ * Copyright (C) 2003 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/*
+ * IQ80331 timer tick configuration.
+ */
+static void __init iq80331_timer_init(void)
+{
+ /* D-Step parts run at a higher internal bus frequency */
+ if (*IOP3XX_ATURID >= 0xa)
+ iop3xx_init_time(333000000);
+ else
+ iop3xx_init_time(266000000);
+}
+
+static struct sys_timer iq80331_timer = {
+ .init = iq80331_timer_init,
+ .offset = iop3xx_gettimeoffset,
+};
+
+
+/*
+ * IQ80331 PCI.
+ */
+static inline int __init
+iq80331_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ if (slot == 1 && pin == 1) {
+ /* PCI-X Slot INTA */
+ irq = IRQ_IOP33X_XINT1;
+ } else if (slot == 1 && pin == 2) {
+ /* PCI-X Slot INTB */
+ irq = IRQ_IOP33X_XINT2;
+ } else if (slot == 1 && pin == 3) {
+ /* PCI-X Slot INTC */
+ irq = IRQ_IOP33X_XINT3;
+ } else if (slot == 1 && pin == 4) {
+ /* PCI-X Slot INTD */
+ irq = IRQ_IOP33X_XINT0;
+ } else if (slot == 2) {
+ /* GigE */
+ irq = IRQ_IOP33X_XINT2;
+ } else {
+ printk(KERN_ERR "iq80331_pci_map_irq() called for unknown "
+ "device PCI:%d:%d:%d\n", dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ irq = -1;
+ }
+
+ return irq;
+}
+
+static struct hw_pci iq80331_pci __initdata = {
+ .swizzle = pci_std_swizzle,
+ .nr_controllers = 1,
+ .setup = iop3xx_pci_setup,
+ .preinit = iop3xx_pci_preinit,
+ .scan = iop3xx_pci_scan_bus,
+ .map_irq = iq80331_pci_map_irq,
+};
+
+static int __init iq80331_pci_init(void)
+{
+ if (machine_is_iq80331())
+ pci_common_init(&iq80331_pci);
+
+ return 0;
+}
+
+subsys_initcall(iq80331_pci_init);
+
+
+/*
+ * IQ80331 machine initialisation.
+ */
+static struct physmap_flash_data iq80331_flash_data = {
+ .width = 1,
+};
+
+static struct resource iq80331_flash_resource = {
+ .start = 0xc0000000,
+ .end = 0xc07fffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device iq80331_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &iq80331_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &iq80331_flash_resource,
+};
+
+static void __init iq80331_init_machine(void)
+{
+ platform_device_register(&iop3xx_i2c0_device);
+ platform_device_register(&iop3xx_i2c1_device);
+ platform_device_register(&iop33x_uart0_device);
+ platform_device_register(&iop33x_uart1_device);
+ platform_device_register(&iq80331_flash_device);
+}
+
+MACHINE_START(IQ80331, "Intel IQ80331")
+ /* Maintainer: Intel Corp. */
+ .phys_io = 0xfefff000,
+ .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = iop3xx_map_io,
+ .init_irq = iop33x_init_irq,
+ .timer = &iq80331_timer,
+ .init_machine = iq80331_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
new file mode 100644
index 00000000000..9887bfc1c07
--- /dev/null
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -0,0 +1,148 @@
+/*
+ * arch/arm/mach-iop33x/iq80332.c
+ *
+ * Board support code for the Intel IQ80332 platform.
+ *
+ * Author: Dave Jiang <dave.jiang@intel.com>
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/*
+ * IQ80332 timer tick configuration.
+ */
+static void __init iq80332_timer_init(void)
+{
+ /* D-Step parts and the iop333 run at a higher internal bus frequency */
+ if (*IOP3XX_ATURID >= 0xa || *IOP3XX_ATUDID == 0x374)
+ iop3xx_init_time(333000000);
+ else
+ iop3xx_init_time(266000000);
+}
+
+static struct sys_timer iq80332_timer = {
+ .init = iq80332_timer_init,
+ .offset = iop3xx_gettimeoffset,
+};
+
+
+/*
+ * IQ80332 PCI.
+ */
+static inline int __init
+iq80332_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ if (slot == 4 && pin == 1) {
+ /* PCI-X Slot INTA */
+ irq = IRQ_IOP33X_XINT0;
+ } else if (slot == 4 && pin == 2) {
+ /* PCI-X Slot INTB */
+ irq = IRQ_IOP33X_XINT1;
+ } else if (slot == 4 && pin == 3) {
+ /* PCI-X Slot INTC */
+ irq = IRQ_IOP33X_XINT2;
+ } else if (slot == 4 && pin == 4) {
+ /* PCI-X Slot INTD */
+ irq = IRQ_IOP33X_XINT3;
+ } else if (slot == 6) {
+ /* GigE */
+ irq = IRQ_IOP33X_XINT2;
+ } else {
+ printk(KERN_ERR "iq80332_pci_map_irq() called for unknown "
+ "device PCI:%d:%d:%d\n", dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ irq = -1;
+ }
+
+ return irq;
+}
+
+static struct hw_pci iq80332_pci __initdata = {
+ .swizzle = pci_std_swizzle,
+ .nr_controllers = 1,
+ .setup = iop3xx_pci_setup,
+ .preinit = iop3xx_pci_preinit,
+ .scan = iop3xx_pci_scan_bus,
+ .map_irq = iq80332_pci_map_irq,
+};
+
+static int __init iq80332_pci_init(void)
+{
+ if (machine_is_iq80332())
+ pci_common_init(&iq80332_pci);
+
+ return 0;
+}
+
+subsys_initcall(iq80332_pci_init);
+
+
+/*
+ * IQ80332 machine initialisation.
+ */
+static struct physmap_flash_data iq80332_flash_data = {
+ .width = 1,
+};
+
+static struct resource iq80332_flash_resource = {
+ .start = 0xc0000000,
+ .end = 0xc07fffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device iq80332_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &iq80332_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &iq80332_flash_resource,
+};
+
+static void __init iq80332_init_machine(void)
+{
+ platform_device_register(&iop3xx_i2c0_device);
+ platform_device_register(&iop3xx_i2c1_device);
+ platform_device_register(&iop33x_uart0_device);
+ platform_device_register(&iop33x_uart1_device);
+ platform_device_register(&iq80332_flash_device);
+}
+
+MACHINE_START(IQ80332, "Intel IQ80332")
+ /* Maintainer: Intel Corp. */
+ .phys_io = 0xfefff000,
+ .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = iop3xx_map_io,
+ .init_irq = iop33x_init_irq,
+ .timer = &iq80332_timer,
+ .init_machine = iq80332_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c
new file mode 100644
index 00000000000..63304b3d0d7
--- /dev/null
+++ b/arch/arm/mach-iop33x/irq.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-iop33x/irq.c
+ *
+ * Generic IOP331 IRQ handling functionality
+ *
+ * Author: Dave Jiang <dave.jiang@intel.com>
+ * Copyright (C) 2003 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+
+static u32 iop33x_mask0;
+static u32 iop33x_mask1;
+
+static inline void intctl0_write(u32 val)
+{
+ iop3xx_cp6_enable();
+ asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
+ iop3xx_cp6_disable();
+}
+
+static inline void intctl1_write(u32 val)
+{
+ iop3xx_cp6_enable();
+ asm volatile("mcr p6, 0, %0, c1, c0, 0" : : "r" (val));
+ iop3xx_cp6_disable();
+}
+
+static inline void intstr0_write(u32 val)
+{
+ iop3xx_cp6_enable();
+ asm volatile("mcr p6, 0, %0, c2, c0, 0" : : "r" (val));
+ iop3xx_cp6_disable();
+}
+
+static inline void intstr1_write(u32 val)
+{
+ iop3xx_cp6_enable();
+ asm volatile("mcr p6, 0, %0, c3, c0, 0" : : "r" (val));
+ iop3xx_cp6_disable();
+}
+
+static inline void intbase_write(u32 val)
+{
+ iop3xx_cp6_enable();
+ asm volatile("mcr p6, 0, %0, c12, c0, 0" : : "r" (val));
+ iop3xx_cp6_disable();
+}
+
+static inline void intsize_write(u32 val)
+{
+ iop3xx_cp6_enable();
+ asm volatile("mcr p6, 0, %0, c13, c0, 0" : : "r" (val));
+ iop3xx_cp6_disable();
+}
+
+static void
+iop33x_irq_mask1 (unsigned int irq)
+{
+ iop33x_mask0 &= ~(1 << irq);
+ intctl0_write(iop33x_mask0);
+}
+
+static void
+iop33x_irq_mask2 (unsigned int irq)
+{
+ iop33x_mask1 &= ~(1 << (irq - 32));
+ intctl1_write(iop33x_mask1);
+}
+
+static void
+iop33x_irq_unmask1(unsigned int irq)
+{
+ iop33x_mask0 |= 1 << irq;
+ intctl0_write(iop33x_mask0);
+}
+
+static void
+iop33x_irq_unmask2(unsigned int irq)
+{
+ iop33x_mask1 |= (1 << (irq - 32));
+ intctl1_write(iop33x_mask1);
+}
+
+struct irq_chip iop33x_irqchip1 = {
+ .name = "IOP33x-1",
+ .ack = iop33x_irq_mask1,
+ .mask = iop33x_irq_mask1,
+ .unmask = iop33x_irq_unmask1,
+};
+
+struct irq_chip iop33x_irqchip2 = {
+ .name = "IOP33x-2",
+ .ack = iop33x_irq_mask2,
+ .mask = iop33x_irq_mask2,
+ .unmask = iop33x_irq_unmask2,
+};
+
+void __init iop33x_init_irq(void)
+{
+ int i;
+
+ intctl0_write(0);
+ intctl1_write(0);
+ intstr0_write(0);
+ intstr1_write(0);
+ intbase_write(0);
+ intsize_write(1);
+ if (machine_is_iq80331())
+ *IOP3XX_PCIIRSR = 0x0f;
+
+ for (i = 0; i < NR_IRQS; i++) {
+ set_irq_chip(i, (i < 32) ? &iop33x_irqchip1 : &iop33x_irqchip2);
+ set_irq_handler(i, do_level_IRQ);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ }
+}
diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c
new file mode 100644
index 00000000000..ac297cd0276
--- /dev/null
+++ b/arch/arm/mach-iop33x/uart.c
@@ -0,0 +1,105 @@
+/*
+ * arch/arm/mach-iop33x/uart.c
+ *
+ * Author: Dave Jiang (dave.jiang@intel.com)
+ * Copyright (C) 2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/hardware/iop3xx.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#define IOP33X_UART_XTAL 33334000
+
+static struct plat_serial8250_port iop33x_uart0_data[] = {
+ {
+ .membase = (char *)IOP33X_UART0_VIRT,
+ .mapbase = IOP33X_UART0_PHYS,
+ .irq = IRQ_IOP33X_UART0,
+ .uartclk = IOP33X_UART_XTAL,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_SKIP_TEST,
+ },
+ { },
+};
+
+static struct resource iop33x_uart0_resources[] = {
+ [0] = {
+ .start = IOP33X_UART0_PHYS,
+ .end = IOP33X_UART0_PHYS + 0x3f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP33X_UART0,
+ .end = IRQ_IOP33X_UART0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device iop33x_uart0_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = iop33x_uart0_data,
+ },
+ .num_resources = 2,
+ .resource = iop33x_uart0_resources,
+};
+
+
+static struct resource iop33x_uart1_resources[] = {
+ [0] = {
+ .start = IOP33X_UART1_PHYS,
+ .end = IOP33X_UART1_PHYS + 0x3f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP33X_UART1,
+ .end = IRQ_IOP33X_UART1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct plat_serial8250_port iop33x_uart1_data[] = {
+ {
+ .membase = (char *)IOP33X_UART1_VIRT,
+ .mapbase = IOP33X_UART1_PHYS,
+ .irq = IRQ_IOP33X_UART1,
+ .uartclk = IOP33X_UART_XTAL,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_SKIP_TEST,
+ },
+ { },
+};
+
+struct platform_device iop33x_uart1_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = iop33x_uart1_data,
+ },
+ .num_resources = 2,
+ .resource = iop33x_uart1_resources,
+};
diff --git a/arch/arm/mach-iop3xx/Kconfig b/arch/arm/mach-iop3xx/Kconfig
deleted file mode 100644
index 4422f238860..00000000000
--- a/arch/arm/mach-iop3xx/Kconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-if ARCH_IOP3XX
-
-menu "IOP3xx Implementation Options"
-
-comment "IOP3xx Platform Types"
-
-config ARCH_IQ80321
- bool "Enable support for IQ80321"
- select ARCH_IOP321
- help
- Say Y here if you want to run your kernel on the Intel IQ80321
- evaluation kit for the IOP321 chipset.
-
-config ARCH_IQ31244
- bool "Enable support for IQ31244"
- select ARCH_IOP321
- help
- Say Y here if you want to run your kernel on the Intel IQ31244
- evaluation kit for the IOP321 chipset.
-
-config ARCH_IQ80331
- bool "Enable support for IQ80331"
- select ARCH_IOP331
- help
- Say Y here if you want to run your kernel on the Intel IQ80331
- evaluation kit for the IOP331 chipset.
-
-config MACH_IQ80332
- bool "Enable support for IQ80332"
- select ARCH_IOP331
- help
- Say Y here if you want to run your kernel on the Intel IQ80332
- evaluation kit for the IOP332 chipset.
-
-config ARCH_EP80219
- bool "Enable support for EP80219"
- select ARCH_IOP321
- select ARCH_IQ31244
- help
- Say Y here if you want to run your kernel on the Intel EP80219
- evaluation kit for the Intel 80219 chipset (a IOP321 variant).
-
-# Which IOP variant are we running?
-config ARCH_IOP321
- bool
- help
- The IQ80321 uses the IOP321 variant.
- The IQ31244 and EP80219 uses the IOP321 variant.
-
-config ARCH_IOP331
- bool
- default ARCH_IQ80331
- help
- The IQ80331, IQ80332, and IQ80333 uses the IOP331 variant.
-
-comment "IOP3xx Chipset Features"
-
-config IOP331_STEPD
- bool "Chip stepping D of the IOP80331 processor or IOP80333"
- depends on (ARCH_IOP331)
- help
- Say Y here if you have StepD of the IOP80331 or IOP8033
- based platforms.
-
-endmenu
-endif
diff --git a/arch/arm/mach-iop3xx/Makefile b/arch/arm/mach-iop3xx/Makefile
deleted file mode 100644
index b17eb1f4610..00000000000
--- a/arch/arm/mach-iop3xx/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := common.o
-
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_ARCH_IOP321) += iop321-setup.o iop321-irq.o iop321-pci.o iop321-time.o
-
-obj-$(CONFIG_ARCH_IOP331) += iop331-setup.o iop331-irq.o iop331-pci.o iop331-time.o
-
-obj-$(CONFIG_ARCH_IQ80321) += iq80321-mm.o iq80321-pci.o
-
-obj-$(CONFIG_ARCH_IQ31244) += iq31244-mm.o iq31244-pci.o
-
-obj-$(CONFIG_ARCH_IQ80331) += iq80331-mm.o iq80331-pci.o
-
-obj-$(CONFIG_MACH_IQ80332) += iq80332-mm.o iq80332-pci.o
diff --git a/arch/arm/mach-iop3xx/Makefile.boot b/arch/arm/mach-iop3xx/Makefile.boot
deleted file mode 100644
index 6387aa20461..00000000000
--- a/arch/arm/mach-iop3xx/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
- zreladdr-y := 0xa0008000
-params_phys-y := 0xa0000100
-initrd_phys-y := 0xa0800000
-ifeq ($(CONFIG_ARCH_IOP331),y)
- zreladdr-y := 0x00008000
-params_phys-y := 0x00000100
-initrd_phys-y := 0x00800000
-endif
-
diff --git a/arch/arm/mach-iop3xx/common.c b/arch/arm/mach-iop3xx/common.c
deleted file mode 100644
index d7f50e57e75..00000000000
--- a/arch/arm/mach-iop3xx/common.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/common.c
- *
- * Common routines shared across all IOP3xx implementations
- *
- * Author: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright 2003 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/delay.h>
-#include <asm/hardware.h>
-
-/*
- * Shared variables
- */
-unsigned long iop3xx_pcibios_min_io = 0;
-unsigned long iop3xx_pcibios_min_mem = 0;
-
-#ifdef CONFIG_ARCH_EP80219
-#include <linux/kernel.h>
-/*
- * Default power-off for EP80219
- */
-
-static inline void ep80219_send_to_pic(__u8 c) {
-}
-
-void ep80219_power_off(void)
-{
- /*
- * This function will send a SHUTDOWN_COMPLETE message to the PIC controller
- * over I2C. We are not using the i2c subsystem since we are going to power
- * off and it may be removed
- */
-
- /* Send the Address byte w/ the start condition */
- *IOP321_IDBR1 = 0x60;
- *IOP321_ICR1 = 0xE9;
- mdelay(1);
-
- /* Send the START_MSG byte w/ no start or stop condition */
- *IOP321_IDBR1 = 0x0F;
- *IOP321_ICR1 = 0xE8;
- mdelay(1);
-
- /* Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or stop condition */
- *IOP321_IDBR1 = 0x03;
- *IOP321_ICR1 = 0xE8;
- mdelay(1);
-
- /* Send an ignored byte w/ stop condition */
- *IOP321_IDBR1 = 0x00;
- *IOP321_ICR1 = 0xEA;
-
- while (1) ;
-}
-
-#include <linux/init.h>
-#include <linux/pm.h>
-
-static int __init ep80219_init(void)
-{
- pm_power_off = ep80219_power_off;
- return 0;
-}
-arch_initcall(ep80219_init);
-#endif
diff --git a/arch/arm/mach-iop3xx/iop321-irq.c b/arch/arm/mach-iop3xx/iop321-irq.c
deleted file mode 100644
index 88ac333472c..00000000000
--- a/arch/arm/mach-iop3xx/iop321-irq.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/iop321-irq.c
- *
- * Generic IOP321 IRQ handling functionality
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Added IOP3XX chipset and IQ80321 board masking code.
- *
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-
-#include <asm/mach-types.h>
-
-static u32 iop321_mask /* = 0 */;
-
-static inline void intctl_write(u32 val)
-{
- asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val));
-}
-
-static inline void intstr_write(u32 val)
-{
- asm volatile("mcr p6,0,%0,c4,c0,0"::"r" (val));
-}
-
-static void
-iop321_irq_mask (unsigned int irq)
-{
-
- iop321_mask &= ~(1 << (irq - IOP321_IRQ_OFS));
-
- intctl_write(iop321_mask);
-}
-
-static void
-iop321_irq_unmask (unsigned int irq)
-{
- iop321_mask |= (1 << (irq - IOP321_IRQ_OFS));
-
- intctl_write(iop321_mask);
-}
-
-struct irq_chip ext_chip = {
- .name = "IOP",
- .ack = iop321_irq_mask,
- .mask = iop321_irq_mask,
- .unmask = iop321_irq_unmask,
-};
-
-void __init iop321_init_irq(void)
-{
- unsigned int i, tmp;
-
- /* Enable access to coprocessor 6 for dealing with IRQs.
- * From RMK:
- * Basically, the Intel documentation here is poor. It appears that
- * you need to set the bit to be able to access the coprocessor from
- * SVC mode. Whether that allows access from user space or not is
- * unclear.
- */
- asm volatile (
- "mrc p15, 0, %0, c15, c1, 0\n\t"
- "orr %0, %0, %1\n\t"
- "mcr p15, 0, %0, c15, c1, 0\n\t"
- /* The action is delayed, so we have to do this: */
- "mrc p15, 0, %0, c15, c1, 0\n\t"
- "mov %0, %0\n\t"
- "sub pc, pc, #4"
- : "=r" (tmp) : "i" (1 << 6) );
-
- intctl_write(0); // disable all interrupts
- intstr_write(0); // treat all as IRQ
- if(machine_is_iq80321() ||
- machine_is_iq31244()) // all interrupts are inputs to chip
- *IOP321_PCIIRSR = 0x0f;
-
- for(i = IOP321_IRQ_OFS; i < NR_IOP321_IRQS; i++)
- {
- set_irq_chip(i, &ext_chip);
- set_irq_handler(i, do_level_IRQ);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-
- }
-}
-
diff --git a/arch/arm/mach-iop3xx/iop321-pci.c b/arch/arm/mach-iop3xx/iop321-pci.c
deleted file mode 100644
index 8ba6a0e2313..00000000000
--- a/arch/arm/mach-iop3xx/iop321-pci.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iop321-pci.c
- *
- * PCI support for the Intel IOP321 chipset
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/hardware.h>
-#include <asm/mach/pci.h>
-
-#include <asm/arch/iop321.h>
-
-// #define DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...) do { } while (0)
-#endif
-
-/*
- * This routine builds either a type0 or type1 configuration command. If the
- * bus is on the 80321 then a type0 made, else a type1 is created.
- */
-static u32 iop321_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
- struct pci_sys_data *sys = bus->sysdata;
- u32 addr;
-
- if (sys->busnr == bus->number)
- addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
- else
- addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
- addr |= PCI_FUNC(devfn) << 8 | (where & ~3);
-
- return addr;
-}
-
-/*
- * This routine checks the status of the last configuration cycle. If an error
- * was detected it returns a 1, else it returns a 0. The errors being checked
- * are parity, master abort, target abort (master and target). These types of
- * errors occure during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop321_pci_status(void)
-{
- unsigned int status;
- int ret = 0;
-
- /*
- * Check the status registers.
- */
- status = *IOP321_ATUSR;
- if (status & 0xf900)
- {
- DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
- *IOP321_ATUSR = status & 0xf900;
- ret = 1;
- }
- status = *IOP321_ATUISR;
- if (status & 0x679f)
- {
- DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
- *IOP321_ATUISR = status & 0x679f;
- ret = 1;
- }
- return ret;
-}
-
-/*
- * Simply write the address register and read the configuration
- * data. Note that the 4 nop's ensure that we are able to handle
- * a delayed abort (in theory.)
- */
-static inline u32 iop321_read(unsigned long addr)
-{
- u32 val;
-
- __asm__ __volatile__(
- "str %1, [%2]\n\t"
- "ldr %0, [%3]\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- : "=r" (val)
- : "r" (addr), "r" (IOP321_OCCAR), "r" (IOP321_OCCDR));
-
- return val;
-}
-
-/*
- * The read routines must check the error status of the last configuration
- * cycle. If there was an error, the routine returns all hex f's.
- */
-static int
-iop321_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- unsigned long addr = iop321_cfg_address(bus, devfn, where);
- u32 val = iop321_read(addr) >> ((where & 3) * 8);
-
- if( iop321_pci_status() )
- val = 0xffffffff;
-
- *value = val;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop321_write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 value)
-{
- unsigned long addr = iop321_cfg_address(bus, devfn, where);
- u32 val;
-
- if (size != 4) {
- val = iop321_read(addr);
- if (!iop321_pci_status() == 0)
- return PCIBIOS_SUCCESSFUL;
-
- where = (where & 3) * 8;
-
- if (size == 1)
- val &= ~(0xff << where);
- else
- val &= ~(0xffff << where);
-
- *IOP321_OCCDR = val | value << where;
- } else {
- asm volatile(
- "str %1, [%2]\n\t"
- "str %0, [%3]\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- :
- : "r" (value), "r" (addr),
- "r" (IOP321_OCCAR), "r" (IOP321_OCCDR));
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops iop321_ops = {
- .read = iop321_read_config,
- .write = iop321_write_config,
-};
-
-/*
- * When a PCI device does not exist during config cycles, the 80200 gets a
- * bus error instead of returning 0xffffffff. This handler simply returns.
- */
-int
-iop321_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
- DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
- addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
- /*
- * If it was an imprecise abort, then we need to correct the
- * return address to be _after_ the instruction.
- */
- if (fsr & (1 << 10))
- regs->ARM_pc += 4;
-
- return 0;
-}
-
-/*
- * Scan an IOP321 PCI bus. sys->bus defines which bus we scan.
- */
-struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *sys)
-{
- return pci_scan_bus(sys->busnr, &iop321_ops, sys);
-}
-
-void iop321_init(void)
-{
- DBG("PCI: Intel 80321 PCI init code.\n");
- DBG("ATU: IOP321_ATUCMD=0x%04x\n", *IOP321_ATUCMD);
- DBG("ATU: IOP321_OMWTVR0=0x%04x, IOP321_OIOWTVR=0x%04x\n",
- *IOP321_OMWTVR0,
- *IOP321_OIOWTVR);
- DBG("ATU: IOP321_ATUCR=0x%08x\n", *IOP321_ATUCR);
- DBG("ATU: IOP321_IABAR0=0x%08x IOP321_IALR0=0x%08x IOP321_IATVR0=%08x\n",
- *IOP321_IABAR0, *IOP321_IALR0, *IOP321_IATVR0);
- DBG("ATU: IOP321_OMWTVR0=0x%08x\n", *IOP321_OMWTVR0);
- DBG("ATU: IOP321_IABAR1=0x%08x IOP321_IALR1=0x%08x\n",
- *IOP321_IABAR1, *IOP321_IALR1);
- DBG("ATU: IOP321_ERBAR=0x%08x IOP321_ERLR=0x%08x IOP321_ERTVR=%08x\n",
- *IOP321_ERBAR, *IOP321_ERLR, *IOP321_ERTVR);
- DBG("ATU: IOP321_IABAR2=0x%08x IOP321_IALR2=0x%08x IOP321_IATVR2=%08x\n",
- *IOP321_IABAR2, *IOP321_IALR2, *IOP321_IATVR2);
- DBG("ATU: IOP321_IABAR3=0x%08x IOP321_IALR3=0x%08x IOP321_IATVR3=%08x\n",
- *IOP321_IABAR3, *IOP321_IALR3, *IOP321_IATVR3);
-
- hook_fault_code(16+6, iop321_pci_abort, SIGBUS, "imprecise external abort");
-}
-
diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c
deleted file mode 100644
index b6d096903c4..00000000000
--- a/arch/arm/mach-iop3xx/iop321-setup.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/iop321-setup.c
- *
- * Author: Nicolas Pitre <nico@cam.org>
- * Copyright (C) 2001 MontaVista Software, Inc.
- * Copyright (C) 2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/system.h>
-#include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#define IOP321_UART_XTAL 1843200
-
-/*
- * Standard IO mapping for all IOP321 based systems
- */
-static struct map_desc iop321_std_desc[] __initdata = {
- { /* mem mapped registers */
- .virtual = IOP321_VIRT_MEM_BASE,
- .pfn = __phys_to_pfn(IOP321_PHYS_MEM_BASE),
- .length = 0x00002000,
- .type = MT_DEVICE
- }, { /* PCI IO space */
- .virtual = IOP321_PCI_LOWER_IO_VA,
- .pfn = __phys_to_pfn(IOP321_PCI_LOWER_IO_PA),
- .length = IOP321_PCI_IO_WINDOW_SIZE,
- .type = MT_DEVICE
- }
-};
-
-#ifdef CONFIG_ARCH_IQ80321
-#define UARTBASE IQ80321_UART
-#define IRQ_UART IRQ_IQ80321_UART
-#endif
-
-#ifdef CONFIG_ARCH_IQ31244
-#define UARTBASE IQ31244_UART
-#define IRQ_UART IRQ_IQ31244_UART
-#endif
-
-static struct uart_port iop321_serial_ports[] = {
- {
- .membase = (char*)(UARTBASE),
- .mapbase = (UARTBASE),
- .irq = IRQ_UART,
- .flags = UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = IOP321_UART_XTAL,
- .line = 0,
- .type = PORT_16550A,
- .fifosize = 16
- }
-};
-
-static struct resource iop32x_i2c_0_resources[] = {
- [0] = {
- .start = 0xfffff680,
- .end = 0xfffff698,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP321_I2C_0,
- .end = IRQ_IOP321_I2C_0,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct resource iop32x_i2c_1_resources[] = {
- [0] = {
- .start = 0xfffff6a0,
- .end = 0xfffff6b8,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP321_I2C_1,
- .end = IRQ_IOP321_I2C_1,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct platform_device iop32x_i2c_0_controller = {
- .name = "IOP3xx-I2C",
- .id = 0,
- .num_resources = 2,
- .resource = iop32x_i2c_0_resources
-};
-
-static struct platform_device iop32x_i2c_1_controller = {
- .name = "IOP3xx-I2C",
- .id = 1,
- .num_resources = 2,
- .resource = iop32x_i2c_1_resources
-};
-
-static struct platform_device *iop32x_devices[] __initdata = {
- &iop32x_i2c_0_controller,
- &iop32x_i2c_1_controller
-};
-
-void __init iop32x_init(void)
-{
- if(iop_is_321())
- {
- platform_add_devices(iop32x_devices,
- ARRAY_SIZE(iop32x_devices));
- }
-}
-
-void __init iop321_map_io(void)
-{
- iotable_init(iop321_std_desc, ARRAY_SIZE(iop321_std_desc));
- early_serial_setup(&iop321_serial_ports[0]);
-}
-
-#ifdef CONFIG_ARCH_IQ80321
-extern void iq80321_map_io(void);
-extern struct sys_timer iop321_timer;
-extern void iop321_init_time(void);
-#endif
-
-#ifdef CONFIG_ARCH_IQ31244
-extern void iq31244_map_io(void);
-extern struct sys_timer iop321_timer;
-extern void iop321_init_time(void);
-#endif
-
-#if defined(CONFIG_ARCH_IQ80321)
-MACHINE_START(IQ80321, "Intel IQ80321")
- /* Maintainer: Intel Corporation */
- .phys_io = IQ80321_UART,
- .io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc,
- .map_io = iq80321_map_io,
- .init_irq = iop321_init_irq,
- .timer = &iop321_timer,
- .boot_params = 0xa0000100,
- .init_machine = iop32x_init,
-MACHINE_END
-#elif defined(CONFIG_ARCH_IQ31244)
-MACHINE_START(IQ31244, "Intel IQ31244")
- /* Maintainer: Intel Corp. */
- .phys_io = IQ31244_UART,
- .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc,
- .map_io = iq31244_map_io,
- .init_irq = iop321_init_irq,
- .timer = &iop321_timer,
- .boot_params = 0xa0000100,
- .init_machine = iop32x_init,
-MACHINE_END
-#else
-#error No machine descriptor defined for this IOP3XX implementation
-#endif
diff --git a/arch/arm/mach-iop3xx/iop321-time.c b/arch/arm/mach-iop3xx/iop321-time.c
deleted file mode 100644
index 04b1a6f7eba..00000000000
--- a/arch/arm/mach-iop3xx/iop321-time.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iop321-time.c
- *
- * Timer code for IOP321 based systems
- *
- * Author: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright 2002-2003 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#define IOP321_TIME_SYNC 0
-
-static inline unsigned long get_elapsed(void)
-{
- return LATCH - *IOP321_TU_TCR0;
-}
-
-static unsigned long iop321_gettimeoffset(void)
-{
- unsigned long elapsed, usec;
- u32 tisr1, tisr2;
-
- /*
- * If an interrupt was pending before we read the timer,
- * we've already wrapped. Factor this into the time.
- * If an interrupt was pending after we read the timer,
- * it may have wrapped between checking the interrupt
- * status and reading the timer. Re-read the timer to
- * be sure its value is after the wrap.
- */
-
- asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr1));
- elapsed = get_elapsed();
- asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr2));
-
- if(tisr1 & 1)
- elapsed += LATCH;
- else if (tisr2 & 1)
- elapsed = LATCH + get_elapsed();
-
- /*
- * Now convert them to usec.
- */
- usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000));
-
- return usec;
-}
-
-static irqreturn_t
-iop321_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- u32 tisr;
-
- write_seqlock(&xtime_lock);
-
- asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr));
- tisr |= 1;
- asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (tisr));
-
- timer_tick(regs);
-
- write_sequnlock(&xtime_lock);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction iop321_timer_irq = {
- .name = "IOP321 Timer Tick",
- .handler = iop321_timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_TIMER,
-};
-
-static void __init iop321_timer_init(void)
-{
- u32 timer_ctl;
-
- setup_irq(IRQ_IOP321_TIMER0, &iop321_timer_irq);
-
- timer_ctl = IOP321_TMR_EN | IOP321_TMR_PRIVILEGED | IOP321_TMR_RELOAD |
- IOP321_TMR_RATIO_1_1;
-
- asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (LATCH));
-
- asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (timer_ctl));
-}
-
-struct sys_timer iop321_timer = {
- .init = &iop321_timer_init,
- .offset = iop321_gettimeoffset,
-};
diff --git a/arch/arm/mach-iop3xx/iop331-irq.c b/arch/arm/mach-iop3xx/iop331-irq.c
deleted file mode 100644
index cab11722ced..00000000000
--- a/arch/arm/mach-iop3xx/iop331-irq.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/iop331-irq.c
- *
- * Generic IOP331 IRQ handling functionality
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2003 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-
-#include <asm/mach-types.h>
-
-static u32 iop331_mask0 = 0;
-static u32 iop331_mask1 = 0;
-
-static inline void intctl_write0(u32 val)
-{
- // INTCTL0
- asm volatile("mcr p6,0,%0,c0,c0,0"::"r" (val));
-}
-
-static inline void intctl_write1(u32 val)
-{
- // INTCTL1
- asm volatile("mcr p6,0,%0,c1,c0,0"::"r" (val));
-}
-
-static inline void intstr_write0(u32 val)
-{
- // INTSTR0
- asm volatile("mcr p6,0,%0,c2,c0,0"::"r" (val));
-}
-
-static inline void intstr_write1(u32 val)
-{
- // INTSTR1
- asm volatile("mcr p6,0,%0,c3,c0,0"::"r" (val));
-}
-
-static void
-iop331_irq_mask1 (unsigned int irq)
-{
- iop331_mask0 &= ~(1 << (irq - IOP331_IRQ_OFS));
- intctl_write0(iop331_mask0);
-}
-
-static void
-iop331_irq_mask2 (unsigned int irq)
-{
- iop331_mask1 &= ~(1 << (irq - IOP331_IRQ_OFS - 32));
- intctl_write1(iop331_mask1);
-}
-
-static void
-iop331_irq_unmask1(unsigned int irq)
-{
- iop331_mask0 |= (1 << (irq - IOP331_IRQ_OFS));
- intctl_write0(iop331_mask0);
-}
-
-static void
-iop331_irq_unmask2(unsigned int irq)
-{
- iop331_mask1 |= (1 << (irq - IOP331_IRQ_OFS - 32));
- intctl_write1(iop331_mask1);
-}
-
-struct irq_chip iop331_irqchip1 = {
- .name = "IOP-1",
- .ack = iop331_irq_mask1,
- .mask = iop331_irq_mask1,
- .unmask = iop331_irq_unmask1,
-};
-
-struct irq_chip iop331_irqchip2 = {
- .name = "IOP-2",
- .ack = iop331_irq_mask2,
- .mask = iop331_irq_mask2,
- .unmask = iop331_irq_unmask2,
-};
-
-void __init iop331_init_irq(void)
-{
- unsigned int i, tmp;
-
- /* Enable access to coprocessor 6 for dealing with IRQs.
- * From RMK:
- * Basically, the Intel documentation here is poor. It appears that
- * you need to set the bit to be able to access the coprocessor from
- * SVC mode. Whether that allows access from user space or not is
- * unclear.
- */
- asm volatile (
- "mrc p15, 0, %0, c15, c1, 0\n\t"
- "orr %0, %0, %1\n\t"
- "mcr p15, 0, %0, c15, c1, 0\n\t"
- /* The action is delayed, so we have to do this: */
- "mrc p15, 0, %0, c15, c1, 0\n\t"
- "mov %0, %0\n\t"
- "sub pc, pc, #4"
- : "=r" (tmp) : "i" (1 << 6) );
-
- intctl_write0(0); // disable all interrupts
- intctl_write1(0);
- intstr_write0(0); // treat all as IRQ
- intstr_write1(0);
- if(machine_is_iq80331()) // all interrupts are inputs to chip
- *IOP331_PCIIRSR = 0x0f;
-
- for(i = IOP331_IRQ_OFS; i < NR_IOP331_IRQS; i++)
- {
- set_irq_chip(i, (i < 32) ? &iop331_irqchip1 : &iop331_irqchip2);
- set_irq_handler(i, do_level_IRQ);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
- }
-}
-
diff --git a/arch/arm/mach-iop3xx/iop331-pci.c b/arch/arm/mach-iop3xx/iop331-pci.c
deleted file mode 100644
index 44dd213b48a..00000000000
--- a/arch/arm/mach-iop3xx/iop331-pci.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iop331-pci.c
- *
- * PCI support for the Intel IOP331 chipset
- *
- * Author: Dave Jiang (dave.jiang@intel.com)
- * Copyright (C) 2003, 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/hardware.h>
-#include <asm/mach/pci.h>
-
-#include <asm/arch/iop331.h>
-
-#undef DEBUG
-#undef DEBUG1
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...) do { } while (0)
-#endif
-
-#ifdef DEBUG1
-#define DBG1(x...) printk(x)
-#else
-#define DBG1(x...) do { } while (0)
-#endif
-
-/*
- * This routine builds either a type0 or type1 configuration command. If the
- * bus is on the 80331 then a type0 made, else a type1 is created.
- */
-static u32 iop331_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
- struct pci_sys_data *sys = bus->sysdata;
- u32 addr;
-
- if (sys->busnr == bus->number)
- addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
- else
- addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
- addr |= PCI_FUNC(devfn) << 8 | (where & ~3);
-
- return addr;
-}
-
-/*
- * This routine checks the status of the last configuration cycle. If an error
- * was detected it returns a 1, else it returns a 0. The errors being checked
- * are parity, master abort, target abort (master and target). These types of
- * errors occure during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop331_pci_status(void)
-{
- unsigned int status;
- int ret = 0;
-
- /*
- * Check the status registers.
- */
- status = *IOP331_ATUSR;
- if (status & 0xf900)
- {
- DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
- *IOP331_ATUSR = status & 0xf900;
- ret = 1;
- }
- status = *IOP331_ATUISR;
- if (status & 0x679f)
- {
- DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
- *IOP331_ATUISR = status & 0x679f;
- ret = 1;
- }
- return ret;
-}
-
-/*
- * Simply write the address register and read the configuration
- * data. Note that the 4 nop's ensure that we are able to handle
- * a delayed abort (in theory.)
- */
-static inline u32 iop331_read(unsigned long addr)
-{
- u32 val;
-
- __asm__ __volatile__(
- "str %1, [%2]\n\t"
- "ldr %0, [%3]\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- : "=r" (val)
- : "r" (addr), "r" (IOP331_OCCAR), "r" (IOP331_OCCDR));
-
- return val;
-}
-
-/*
- * The read routines must check the error status of the last configuration
- * cycle. If there was an error, the routine returns all hex f's.
- */
-static int
-iop331_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- unsigned long addr = iop331_cfg_address(bus, devfn, where);
- u32 val = iop331_read(addr) >> ((where & 3) * 8);
-
- if( iop331_pci_status() )
- val = 0xffffffff;
-
- *value = val;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop331_write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 value)
-{
- unsigned long addr = iop331_cfg_address(bus, devfn, where);
- u32 val;
-
- if (size != 4) {
- val = iop331_read(addr);
- if (!iop331_pci_status() == 0)
- return PCIBIOS_SUCCESSFUL;
-
- where = (where & 3) * 8;
-
- if (size == 1)
- val &= ~(0xff << where);
- else
- val &= ~(0xffff << where);
-
- *IOP331_OCCDR = val | value << where;
- } else {
- asm volatile(
- "str %1, [%2]\n\t"
- "str %0, [%3]\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- :
- : "r" (value), "r" (addr),
- "r" (IOP331_OCCAR), "r" (IOP331_OCCDR));
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops iop331_ops = {
- .read = iop331_read_config,
- .write = iop331_write_config,
-};
-
-/*
- * When a PCI device does not exist during config cycles, the XScale gets a
- * bus error instead of returning 0xffffffff. This handler simply returns.
- */
-int
-iop331_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
- DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
- addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
- /*
- * If it was an imprecise abort, then we need to correct the
- * return address to be _after_ the instruction.
- */
- if (fsr & (1 << 10))
- regs->ARM_pc += 4;
-
- return 0;
-}
-
-/*
- * Scan an IOP331 PCI bus. sys->bus defines which bus we scan.
- */
-struct pci_bus *iop331_scan_bus(int nr, struct pci_sys_data *sys)
-{
- return pci_scan_bus(sys->busnr, &iop331_ops, sys);
-}
-
-void iop331_init(void)
-{
- DBG1("PCI: Intel 80331 PCI init code.\n");
- DBG1("\tATU: IOP331_ATUCMD=0x%04x\n", *IOP331_ATUCMD);
- DBG1("\tATU: IOP331_OMWTVR0=0x%04x, IOP331_OIOWTVR=0x%04x\n",
- *IOP331_OMWTVR0,
- *IOP331_OIOWTVR);
- DBG1("\tATU: IOP331_OMWTVR1=0x%04x\n", *IOP331_OMWTVR1);
- DBG1("\tATU: IOP331_ATUCR=0x%08x\n", *IOP331_ATUCR);
- DBG1("\tATU: IOP331_IABAR0=0x%08x IOP331_IALR0=0x%08x IOP331_IATVR0=%08x\n", *IOP331_IABAR0, *IOP331_IALR0, *IOP331_IATVR0);
- DBG1("\tATU: IOP31_IABAR1=0x%08x IOP331_IALR1=0x%08x\n", *IOP331_IABAR1, *IOP331_IALR1);
- DBG1("\tATU: IOP331_ERBAR=0x%08x IOP331_ERLR=0x%08x IOP331_ERTVR=%08x\n", *IOP331_ERBAR, *IOP331_ERLR, *IOP331_ERTVR);
- DBG1("\tATU: IOP331_IABAR2=0x%08x IOP331_IALR2=0x%08x IOP331_IATVR2=%08x\n", *IOP331_IABAR2, *IOP331_IALR2, *IOP331_IATVR2);
- DBG1("\tATU: IOP331_IABAR3=0x%08x IOP331_IALR3=0x%08x IOP331_IATVR3=%08x\n", *IOP331_IABAR3, *IOP331_IALR3, *IOP331_IATVR3);
-
- hook_fault_code(16+6, iop331_pci_abort, SIGBUS, "imprecise external abort");
-}
-
diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c
deleted file mode 100644
index 3cc98d892ad..00000000000
--- a/arch/arm/mach-iop3xx/iop331-setup.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/iop331-setup.c
- *
- * Author: Dave Jiang (dave.jiang@intel.com)
- * Copyright (C) 2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/system.h>
-#include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#define IOP331_UART_XTAL 33334000
-
-/*
- * Standard IO mapping for all IOP331 based systems
- */
-static struct map_desc iop331_std_desc[] __initdata = {
- { /* mem mapped registers */
- .virtual = IOP331_VIRT_MEM_BASE,
- .pfn = __phys_to_pfn(IOP331_PHYS_MEM_BASE),
- .length = 0x00002000,
- .type = MT_DEVICE
- }, { /* PCI IO space */
- .virtual = IOP331_PCI_LOWER_IO_VA,
- .pfn = __phys_to_pfn(IOP331_PCI_LOWER_IO_PA),
- .length = IOP331_PCI_IO_WINDOW_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static struct resource iop33x_uart0_resources[] = {
- [0] = {
- .start = IOP331_UART0_PHYS,
- .end = IOP331_UART0_PHYS + 0x3f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP331_UART0,
- .end = IRQ_IOP331_UART0,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct resource iop33x_uart1_resources[] = {
- [0] = {
- .start = IOP331_UART1_PHYS,
- .end = IOP331_UART1_PHYS + 0x3f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP331_UART1,
- .end = IRQ_IOP331_UART1,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct plat_serial8250_port iop33x_uart0_data[] = {
- {
- .membase = (char*)(IOP331_UART0_VIRT),
- .mapbase = (IOP331_UART0_PHYS),
- .irq = IRQ_IOP331_UART0,
- .uartclk = IOP331_UART_XTAL,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_SKIP_TEST,
- },
- { },
-};
-
-static struct plat_serial8250_port iop33x_uart1_data[] = {
- {
- .membase = (char*)(IOP331_UART1_VIRT),
- .mapbase = (IOP331_UART1_PHYS),
- .irq = IRQ_IOP331_UART1,
- .uartclk = IOP331_UART_XTAL,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_SKIP_TEST,
- },
- { },
-};
-
-static struct platform_device iop33x_uart0 = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev.platform_data = iop33x_uart0_data,
- .num_resources = 2,
- .resource = iop33x_uart0_resources,
-};
-
-static struct platform_device iop33x_uart1 = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM1,
- .dev.platform_data = iop33x_uart1_data,
- .num_resources = 2,
- .resource = iop33x_uart1_resources,
-};
-
-static struct resource iop33x_i2c_0_resources[] = {
- [0] = {
- .start = 0xfffff680,
- .end = 0xfffff698,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP331_I2C_0,
- .end = IRQ_IOP331_I2C_0,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct resource iop33x_i2c_1_resources[] = {
- [0] = {
- .start = 0xfffff6a0,
- .end = 0xfffff6b8,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IOP331_I2C_1,
- .end = IRQ_IOP331_I2C_1,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct platform_device iop33x_i2c_0_controller = {
- .name = "IOP3xx-I2C",
- .id = 0,
- .num_resources = 2,
- .resource = iop33x_i2c_0_resources
-};
-
-static struct platform_device iop33x_i2c_1_controller = {
- .name = "IOP3xx-I2C",
- .id = 1,
- .num_resources = 2,
- .resource = iop33x_i2c_1_resources
-};
-
-static struct platform_device *iop33x_devices[] __initdata = {
- &iop33x_uart0,
- &iop33x_uart1,
- &iop33x_i2c_0_controller,
- &iop33x_i2c_1_controller
-};
-
-void __init iop33x_init(void)
-{
- if(iop_is_331())
- {
- platform_add_devices(iop33x_devices,
- ARRAY_SIZE(iop33x_devices));
- }
-}
-
-void __init iop331_map_io(void)
-{
- iotable_init(iop331_std_desc, ARRAY_SIZE(iop331_std_desc));
-}
-
-#ifdef CONFIG_ARCH_IOP331
-extern void iop331_init_irq(void);
-extern struct sys_timer iop331_timer;
-#endif
-
-#ifdef CONFIG_ARCH_IQ80331
-extern void iq80331_map_io(void);
-#endif
-
-#ifdef CONFIG_MACH_IQ80332
-extern void iq80332_map_io(void);
-#endif
-
-#if defined(CONFIG_ARCH_IQ80331)
-MACHINE_START(IQ80331, "Intel IQ80331")
- /* Maintainer: Intel Corp. */
- .phys_io = 0xfefff000,
- .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical
- .map_io = iq80331_map_io,
- .init_irq = iop331_init_irq,
- .timer = &iop331_timer,
- .boot_params = 0x0100,
- .init_machine = iop33x_init,
-MACHINE_END
-
-#elif defined(CONFIG_MACH_IQ80332)
-MACHINE_START(IQ80332, "Intel IQ80332")
- /* Maintainer: Intel Corp. */
- .phys_io = 0xfefff000,
- .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical
- .map_io = iq80332_map_io,
- .init_irq = iop331_init_irq,
- .timer = &iop331_timer,
- .boot_params = 0x0100,
- .init_machine = iop33x_init,
-MACHINE_END
-
-#else
-#error No machine descriptor defined for this IOP3XX implementation
-#endif
-
-
diff --git a/arch/arm/mach-iop3xx/iop331-time.c b/arch/arm/mach-iop3xx/iop331-time.c
deleted file mode 100644
index 0c09e74c574..00000000000
--- a/arch/arm/mach-iop3xx/iop331-time.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iop331-time.c
- *
- * Timer code for IOP331 based systems
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- *
- * Copyright 2003 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-static inline unsigned long get_elapsed(void)
-{
- return LATCH - *IOP331_TU_TCR0;
-}
-
-static unsigned long iop331_gettimeoffset(void)
-{
- unsigned long elapsed, usec;
- u32 tisr1, tisr2;
-
- /*
- * If an interrupt was pending before we read the timer,
- * we've already wrapped. Factor this into the time.
- * If an interrupt was pending after we read the timer,
- * it may have wrapped between checking the interrupt
- * status and reading the timer. Re-read the timer to
- * be sure its value is after the wrap.
- */
-
- asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr1));
- elapsed = get_elapsed();
- asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr2));
-
- if(tisr1 & 1)
- elapsed += LATCH;
- else if (tisr2 & 1)
- elapsed = LATCH + get_elapsed();
-
- /*
- * Now convert them to usec.
- */
- usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000));
-
- return usec;
-}
-
-static irqreturn_t
-iop331_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- u32 tisr;
-
- write_seqlock(&xtime_lock);
-
- asm volatile("mrc p6, 0, %0, c6, c1, 0" : "=r" (tisr));
- tisr |= 1;
- asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (tisr));
-
- timer_tick(regs);
-
- write_sequnlock(&xtime_lock);
- return IRQ_HANDLED;
-}
-
-static struct irqaction iop331_timer_irq = {
- .name = "IOP331 Timer Tick",
- .handler = iop331_timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_TIMER,
-};
-
-static void __init iop331_timer_init(void)
-{
- u32 timer_ctl;
-
- setup_irq(IRQ_IOP331_TIMER0, &iop331_timer_irq);
-
- timer_ctl = IOP331_TMR_EN | IOP331_TMR_PRIVILEGED | IOP331_TMR_RELOAD |
- IOP331_TMR_RATIO_1_1;
-
- asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (LATCH));
-
- asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (timer_ctl));
-
-}
-
-struct sys_timer iop331_timer = {
- .init = iop331_timer_init,
- .offset = iop331_gettimeoffset,
-};
diff --git a/arch/arm/mach-iop3xx/iq31244-mm.c b/arch/arm/mach-iop3xx/iq31244-mm.c
deleted file mode 100644
index e874b54eefe..00000000000
--- a/arch/arm/mach-iop3xx/iq31244-mm.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/mm.c
- *
- * Low level memory initialization for iq80321 platform
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-
-
-/*
- * IQ80321 specific IO mappings
- *
- * We use RedBoot's setup for the onboard devices.
- */
-static struct map_desc iq31244_io_desc[] __initdata = {
- { /* on-board devices */
- .virtual = IQ31244_UART,
- .pfn = __phys_to_pfn(IQ31244_UART),
- .length = 0x00100000,
- .type = MT_DEVICE
- }
-};
-
-void __init iq31244_map_io(void)
-{
- iop321_map_io();
-
- iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
-}
diff --git a/arch/arm/mach-iop3xx/iq31244-pci.c b/arch/arm/mach-iop3xx/iq31244-pci.c
deleted file mode 100644
index f3c6413fa5b..00000000000
--- a/arch/arm/mach-iop3xx/iq31244-pci.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iq80321-pci.c
- *
- * PCI support for the Intel IQ80321 reference board
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those systems that do not already have PCI
- * interrupts properly routed. We assume 1 <= pin <= 4
- */
-#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \
-({ int _ctl_ = -1; \
- unsigned int _idsel = idsel - minid; \
- if (_idsel <= maxid) \
- _ctl_ = pci_irq_table[_idsel][pin-1]; \
- _ctl_; })
-
-#define INTA IRQ_IQ31244_INTA
-#define INTB IRQ_IQ31244_INTB
-#define INTC IRQ_IQ31244_INTC
-#define INTD IRQ_IQ31244_INTD
-
-#define INTE IRQ_IQ31244_I82546
-
-static inline int __init
-iq31244_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
-{
- static int pci_irq_table[][4] = {
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
-#ifdef CONFIG_ARCH_EP80219
- {INTB, INTB, INTB, INTB}, /* CFlash */
- {INTE, INTE, INTE, INTE}, /* 82551 Pro 100 */
- {INTD, INTD, INTD, INTD}, /* PCI-X Slot */
- {INTC, INTC, INTC, INTC}, /* SATA */
-#else
- {INTB, INTB, INTB, INTB}, /* CFlash */
- {INTC, INTC, INTC, INTC}, /* SATA */
- {INTD, INTD, INTD, INTD}, /* PCI-X Slot */
- {INTE, INTE, INTE, INTE}, /* 82546 GigE */
-#endif // CONFIG_ARCH_EP80219
- };
-
- BUG_ON(pin < 1 || pin > 4);
-
- return PCI_IRQ_TABLE_LOOKUP(0, 7);
-}
-
-static int iq31244_setup(int nr, struct pci_sys_data *sys)
-{
- struct resource *res;
-
- if(nr != 0)
- return 0;
-
- res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
- if (!res)
- panic("PCI: unable to alloc resources");
-
- res[0].start = IOP321_PCI_LOWER_IO_VA;
- res[0].end = IOP321_PCI_UPPER_IO_VA;
- res[0].name = "IQ31244 PCI I/O Space";
- res[0].flags = IORESOURCE_IO;
-
- res[1].start = IOP321_PCI_LOWER_MEM_PA;
- res[1].end = IOP321_PCI_UPPER_MEM_PA;
- res[1].name = "IQ31244 PCI Memory Space";
- res[1].flags = IORESOURCE_MEM;
-
- request_resource(&ioport_resource, &res[0]);
- request_resource(&iomem_resource, &res[1]);
-
- sys->mem_offset = IOP321_PCI_MEM_OFFSET;
- sys->io_offset = IOP321_PCI_IO_OFFSET;
-
- sys->resource[0] = &res[0];
- sys->resource[1] = &res[1];
- sys->resource[2] = NULL;
-
- return 1;
-}
-
-static void iq31244_preinit(void)
-{
- iop321_init();
-}
-
-static struct hw_pci iq31244_pci __initdata = {
- .swizzle = pci_std_swizzle,
- .nr_controllers = 1,
- .setup = iq31244_setup,
- .scan = iop321_scan_bus,
- .preinit = iq31244_preinit,
- .map_irq = iq31244_map_irq
-};
-
-static int __init iq31244_pci_init(void)
-{
- if (machine_is_iq31244())
- pci_common_init(&iq31244_pci);
- return 0;
-}
-
-subsys_initcall(iq31244_pci_init);
-
-
-
-
diff --git a/arch/arm/mach-iop3xx/iq80321-mm.c b/arch/arm/mach-iop3xx/iq80321-mm.c
deleted file mode 100644
index d9cac5e1fc3..00000000000
--- a/arch/arm/mach-iop3xx/iq80321-mm.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/mm.c
- *
- * Low level memory initialization for iq80321 platform
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-
-
-/*
- * IQ80321 specific IO mappings
- *
- * We use RedBoot's setup for the onboard devices.
- */
-static struct map_desc iq80321_io_desc[] __initdata = {
- { /* on-board devices */
- .virtual = IQ80321_UART,
- .pfn = __phys_to_pfn(IQ80321_UART),
- .length = 0x00100000,
- .type = MT_DEVICE
- }
-};
-
-void __init iq80321_map_io(void)
-{
- iop321_map_io();
-
- iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
-}
diff --git a/arch/arm/mach-iop3xx/iq80321-pci.c b/arch/arm/mach-iop3xx/iq80321-pci.c
deleted file mode 100644
index d9758d3f6e7..00000000000
--- a/arch/arm/mach-iop3xx/iq80321-pci.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iq80321-pci.c
- *
- * PCI support for the Intel IQ80321 reference board
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those systems that do not already have PCI
- * interrupts properly routed. We assume 1 <= pin <= 4
- */
-#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \
-({ int _ctl_ = -1; \
- unsigned int _idsel = idsel - minid; \
- if (_idsel <= maxid) \
- _ctl_ = pci_irq_table[_idsel][pin-1]; \
- _ctl_; })
-
-#define INTA IRQ_IQ80321_INTA
-#define INTB IRQ_IQ80321_INTB
-#define INTC IRQ_IQ80321_INTC
-#define INTD IRQ_IQ80321_INTD
-
-#define INTE IRQ_IQ80321_I82544
-
-static inline int __init
-iq80321_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
-{
- static int pci_irq_table[][4] = {
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {INTE, INTE, INTE, INTE}, /* Gig-E */
- {-1, -1, -1, -1}, /* Unused */
- {INTC, INTD, INTA, INTB}, /* PCI-X Slot */
- {-1, -1, -1, -1},
- };
-
- BUG_ON(pin < 1 || pin > 4);
-
-// return PCI_IRQ_TABLE_LOOKUP(4, 7);
- return pci_irq_table[idsel%4][pin-1];
-}
-
-static int iq80321_setup(int nr, struct pci_sys_data *sys)
-{
- struct resource *res;
-
- if(nr != 0)
- return 0;
-
- res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
- if (!res)
- panic("PCI: unable to alloc resources");
-
- res[0].start = IOP321_PCI_LOWER_IO_VA;
- res[0].end = IOP321_PCI_UPPER_IO_VA;
- res[0].name = "IQ80321 PCI I/O Space";
- res[0].flags = IORESOURCE_IO;
-
- res[1].start = IOP321_PCI_LOWER_MEM_PA;
- res[1].end = IOP321_PCI_UPPER_MEM_PA;
- res[1].name = "IQ80321 PCI Memory Space";
- res[1].flags = IORESOURCE_MEM;
-
- request_resource(&ioport_resource, &res[0]);
- request_resource(&iomem_resource, &res[1]);
-
- sys->mem_offset = IOP321_PCI_MEM_OFFSET;
- sys->io_offset = IOP321_PCI_IO_OFFSET;
-
- sys->resource[0] = &res[0];
- sys->resource[1] = &res[1];
- sys->resource[2] = NULL;
-
- return 1;
-}
-
-static void iq80321_preinit(void)
-{
- iop321_init();
-}
-
-static struct hw_pci iq80321_pci __initdata = {
- .swizzle = pci_std_swizzle,
- .nr_controllers = 1,
- .setup = iq80321_setup,
- .scan = iop321_scan_bus,
- .preinit = iq80321_preinit,
- .map_irq = iq80321_map_irq
-};
-
-static int __init iq80321_pci_init(void)
-{
- if (machine_is_iq80321())
- pci_common_init(&iq80321_pci);
- return 0;
-}
-
-subsys_initcall(iq80321_pci_init);
-
-
-
-
diff --git a/arch/arm/mach-iop3xx/iq80331-mm.c b/arch/arm/mach-iop3xx/iq80331-mm.c
deleted file mode 100644
index 129eb49b067..00000000000
--- a/arch/arm/mach-iop3xx/iq80331-mm.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/mm.c
- *
- * Low level memory initialization for iq80331 platform
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2003 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-
-
-/*
- * IQ80331 specific IO mappings
- *
- * We use RedBoot's setup for the onboard devices.
- */
-
-void __init iq80331_map_io(void)
-{
- iop331_map_io();
-}
diff --git a/arch/arm/mach-iop3xx/iq80331-pci.c b/arch/arm/mach-iop3xx/iq80331-pci.c
deleted file mode 100644
index 40d86100249..00000000000
--- a/arch/arm/mach-iop3xx/iq80331-pci.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iq80331-pci.c
- *
- * PCI support for the Intel IQ80331 reference board
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2003, 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those systems that do not already have PCI
- * interrupts properly routed. We assume 1 <= pin <= 4
- */
-#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \
-({ int _ctl_ = -1; \
- unsigned int _idsel = idsel - minid; \
- if (_idsel <= maxid) \
- _ctl_ = pci_irq_table[_idsel][pin-1]; \
- _ctl_; })
-
-#define INTA IRQ_IQ80331_INTA
-#define INTB IRQ_IQ80331_INTB
-#define INTC IRQ_IQ80331_INTC
-#define INTD IRQ_IQ80331_INTD
-
-//#define INTE IRQ_IQ80331_I82544
-
-static inline int __init
-iq80331_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
-{
- static int pci_irq_table[][4] = {
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {INTB, INTC, INTD, INTA}, /* PCI-X Slot */
- {INTC, INTC, INTC, INTC}, /* GigE */
- };
-
- BUG_ON(pin < 1 || pin > 4);
-
- return PCI_IRQ_TABLE_LOOKUP(1, 7);
-}
-
-static int iq80331_setup(int nr, struct pci_sys_data *sys)
-{
- struct resource *res;
-
- if(nr != 0)
- return 0;
-
- res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
- if (!res)
- panic("PCI: unable to alloc resources");
-
- res[0].start = IOP331_PCI_LOWER_IO_VA;
- res[0].end = IOP331_PCI_UPPER_IO_VA;
- res[0].name = "IQ80331 PCI I/O Space";
- res[0].flags = IORESOURCE_IO;
-
- res[1].start = IOP331_PCI_LOWER_MEM_PA;
- res[1].end = IOP331_PCI_UPPER_MEM_PA;
- res[1].name = "IQ80331 PCI Memory Space";
- res[1].flags = IORESOURCE_MEM;
-
- request_resource(&ioport_resource, &res[0]);
- request_resource(&iomem_resource, &res[1]);
-
- sys->mem_offset = IOP331_PCI_MEM_OFFSET;
- sys->io_offset = IOP331_PCI_IO_OFFSET;
-
- sys->resource[0] = &res[0];
- sys->resource[1] = &res[1];
- sys->resource[2] = NULL;
-
- return 1;
-}
-
-static void iq80331_preinit(void)
-{
- iop331_init();
-}
-
-static struct hw_pci iq80331_pci __initdata = {
- .swizzle = pci_std_swizzle,
- .nr_controllers = 1,
- .setup = iq80331_setup,
- .scan = iop331_scan_bus,
- .preinit = iq80331_preinit,
- .map_irq = iq80331_map_irq
-};
-
-static int __init iq80331_pci_init(void)
-{
- if (machine_is_iq80331())
- pci_common_init(&iq80331_pci);
- return 0;
-}
-
-subsys_initcall(iq80331_pci_init);
-
-
-
-
diff --git a/arch/arm/mach-iop3xx/iq80332-mm.c b/arch/arm/mach-iop3xx/iq80332-mm.c
deleted file mode 100644
index 2feaf7591f5..00000000000
--- a/arch/arm/mach-iop3xx/iq80332-mm.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/arch/arm/mach-iop3xx/mm.c
- *
- * Low level memory initialization for iq80332 platform
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-
-
-/*
- * IQ80332 specific IO mappings
- *
- * We use RedBoot's setup for the onboard devices.
- */
-
-void __init iq80332_map_io(void)
-{
- iop331_map_io();
-}
diff --git a/arch/arm/mach-iop3xx/iq80332-pci.c b/arch/arm/mach-iop3xx/iq80332-pci.c
deleted file mode 100644
index afc0676318e..00000000000
--- a/arch/arm/mach-iop3xx/iq80332-pci.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iq80332-pci.c
- *
- * PCI support for the Intel IQ80332 reference board
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those systems that do not already have PCI
- * interrupts properly routed. We assume 1 <= pin <= 4
- */
-#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \
-({ int _ctl_ = -1; \
- unsigned int _idsel = idsel - minid; \
- if (_idsel <= maxid) \
- _ctl_ = pci_irq_table[_idsel][pin-1]; \
- _ctl_; })
-
-#define INTA IRQ_IQ80332_INTA
-#define INTB IRQ_IQ80332_INTB
-#define INTC IRQ_IQ80332_INTC
-#define INTD IRQ_IQ80332_INTD
-
-//#define INTE IRQ_IQ80332_I82544
-
-static inline int __init
-iq80332_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
-{
- static int pci_irq_table[][8] = {
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {-1, -1, -1, -1},
- {-1, -1, -1, -1},
- {-1, -1, -1, -1},
- {INTA, INTB, INTC, INTD}, /* PCI-X Slot */
- {-1, -1, -1, -1},
- {INTC, INTC, INTC, INTC}, /* GigE */
- {-1, -1, -1, -1},
- {-1, -1, -1, -1},
- };
-
- BUG_ON(pin < 1 || pin > 4);
-
- return PCI_IRQ_TABLE_LOOKUP(1, 7);
-}
-
-static int iq80332_setup(int nr, struct pci_sys_data *sys)
-{
- struct resource *res;
-
- if(nr != 0)
- return 0;
-
- res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
- if (!res)
- panic("PCI: unable to alloc resources");
-
- res[0].start = IOP331_PCI_LOWER_IO_VA;
- res[0].end = IOP331_PCI_UPPER_IO_VA;
- res[0].name = "IQ80332 PCI I/O Space";
- res[0].flags = IORESOURCE_IO;
-
- res[1].start = IOP331_PCI_LOWER_MEM_PA;
- res[1].end = IOP331_PCI_UPPER_MEM_PA;
- res[1].name = "IQ80332 PCI Memory Space";
- res[1].flags = IORESOURCE_MEM;
-
- request_resource(&ioport_resource, &res[0]);
- request_resource(&iomem_resource, &res[1]);
-
- sys->mem_offset = IOP331_PCI_MEM_OFFSET;
- sys->io_offset = IOP331_PCI_IO_OFFSET;
-
- sys->resource[0] = &res[0];
- sys->resource[1] = &res[1];
- sys->resource[2] = NULL;
-
- return 1;
-}
-
-static void iq80332_preinit(void)
-{
- iop331_init();
-}
-
-static struct hw_pci iq80332_pci __initdata = {
- .swizzle = pci_std_swizzle,
- .nr_controllers = 1,
- .setup = iq80332_setup,
- .scan = iop331_scan_bus,
- .preinit = iq80332_preinit,
- .map_irq = iq80332_map_irq
-};
-
-static int __init iq80332_pci_init(void)
-{
- if (machine_is_iq80332())
- pci_common_init(&iq80332_pci);
- return 0;
-}
-
-subsys_initcall(iq80332_pci_init);
-
-
-
-
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 7c25dbd5a18..35dd8b3824b 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -26,6 +26,7 @@
#include <linux/bitops.h>
#include <linux/time.h>
#include <linux/timex.h>
+#include <linux/clocksource.h>
#include <asm/hardware.h>
#include <asm/uaccess.h>
@@ -255,16 +256,6 @@ static unsigned volatile last_jiffy_time;
#define CLOCK_TICKS_PER_USEC ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-/* IRQs are disabled before entering here from do_gettimeofday() */
-static unsigned long ixp4xx_gettimeoffset(void)
-{
- u32 elapsed;
-
- elapsed = *IXP4XX_OSTS - last_jiffy_time;
-
- return elapsed / CLOCK_TICKS_PER_USEC;
-}
-
static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
write_seqlock(&xtime_lock);
@@ -309,7 +300,6 @@ static void __init ixp4xx_timer_init(void)
struct sys_timer ixp4xx_timer = {
.init = ixp4xx_timer_init,
- .offset = ixp4xx_gettimeoffset,
};
static struct resource ixp46x_i2c_resources[] = {
@@ -365,3 +355,29 @@ void __init ixp4xx_sys_init(void)
ixp4xx_exp_bus_size >> 20);
}
+cycle_t ixp4xx_get_cycles(void)
+{
+ return *IXP4XX_OSTS;
+}
+
+static struct clocksource clocksource_ixp4xx = {
+ .name = "OSTS",
+ .rating = 200,
+ .read = ixp4xx_get_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .is_continuous = 1,
+};
+
+unsigned long ixp4xx_timer_freq = FREQ;
+static int __init ixp4xx_clocksource_init(void)
+{
+ clocksource_ixp4xx.mult =
+ clocksource_hz2mult(ixp4xx_timer_freq,
+ clocksource_ixp4xx.shift);
+ clocksource_register(&clocksource_ixp4xx);
+
+ return 0;
+}
+
+device_initcall(ixp4xx_clocksource_init);
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 749a337494d..162c266e5f8 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -159,6 +159,8 @@ static void nslu2_power_off(void)
static void __init nslu2_init(void)
{
+ ixp4xx_timer_freq = NSLU2_FREQ;
+
ixp4xx_sys_init();
nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index f1958e882e8..638490e62d5 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -20,6 +20,7 @@
#include <linux/clk.h>
#include <asm/io.h>
+#include <asm/mach-types.h>
#include <asm/arch/cpu.h>
#include <asm/arch/usb.h>
@@ -586,77 +587,53 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
*-------------------------------------------------------------------------*/
#ifdef CONFIG_OMAP_RESET_CLOCKS
-/*
- * Resets some clocks that may be left on from bootloader,
- * but leaves serial clocks on. See also omap_late_clk_reset().
- */
-static inline void omap1_early_clk_reset(void)
-{
- //omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
-}
-static int __init omap1_late_clk_reset(void)
+static void __init omap1_clk_disable_unused(struct clk *clk)
{
- /* Turn off all unused clocks */
- struct clk *p;
__u32 regval32;
- /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
- regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4);
- omap_writew(regval32, SOFT_REQ_REG);
- omap_writew(0, SOFT_REQ_REG2);
-
- list_for_each_entry(p, &clocks, node) {
- if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) ||
- p->enable_reg == 0)
- continue;
-
- /* Clocks in the DSP domain need api_ck. Just assume bootloader
- * has not enabled any DSP clocks */
- if ((u32)p->enable_reg == DSP_IDLECT2) {
- printk(KERN_INFO "Skipping reset check for DSP domain "
- "clock \"%s\"\n", p->name);
- continue;
- }
+ /* Clocks in the DSP domain need api_ck. Just assume bootloader
+ * has not enabled any DSP clocks */
+ if ((u32)clk->enable_reg == DSP_IDLECT2) {
+ printk(KERN_INFO "Skipping reset check for DSP domain "
+ "clock \"%s\"\n", clk->name);
+ return;
+ }
- /* Is the clock already disabled? */
- if (p->flags & ENABLE_REG_32BIT) {
- if (p->flags & VIRTUAL_IO_ADDRESS)
- regval32 = __raw_readl(p->enable_reg);
- else
- regval32 = omap_readl(p->enable_reg);
- } else {
- if (p->flags & VIRTUAL_IO_ADDRESS)
- regval32 = __raw_readw(p->enable_reg);
+ /* Is the clock already disabled? */
+ if (clk->flags & ENABLE_REG_32BIT) {
+ if (clk->flags & VIRTUAL_IO_ADDRESS)
+ regval32 = __raw_readl(clk->enable_reg);
else
- regval32 = omap_readw(p->enable_reg);
- }
-
- if ((regval32 & (1 << p->enable_bit)) == 0)
- continue;
+ regval32 = omap_readl(clk->enable_reg);
+ } else {
+ if (clk->flags & VIRTUAL_IO_ADDRESS)
+ regval32 = __raw_readw(clk->enable_reg);
+ else
+ regval32 = omap_readw(clk->enable_reg);
+ }
- /* FIXME: This clock seems to be necessary but no-one
- * has asked for its activation. */
- if (p == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera
- || p == &ck_dpll1out.clk // FIX: SoSSI, SSR
- || p == &arm_gpio_ck // FIX: GPIO code for 1510
- ) {
- printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
- p->name);
- continue;
- }
+ if ((regval32 & (1 << clk->enable_bit)) == 0)
+ return;
- printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name);
- p->disable(p);
- printk(" done\n");
+ /* FIXME: This clock seems to be necessary but no-one
+ * has asked for its activation. */
+ if (clk == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera
+ || clk == &ck_dpll1out.clk // FIX: SoSSI, SSR
+ || clk == &arm_gpio_ck // FIX: GPIO code for 1510
+ ) {
+ printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
+ clk->name);
+ return;
}
- return 0;
+ printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name);
+ clk->disable(clk);
+ printk(" done\n");
}
-late_initcall(omap1_late_clk_reset);
#else
-#define omap1_early_clk_reset() {}
+#define omap1_clk_disable_unused NULL
#endif
static struct clk_functions omap1_clk_functions = {
@@ -664,6 +641,7 @@ static struct clk_functions omap1_clk_functions = {
.clk_disable = omap1_clk_disable,
.clk_round_rate = omap1_clk_round_rate,
.clk_set_rate = omap1_clk_set_rate,
+ .clk_disable_unused = omap1_clk_disable_unused,
};
int __init omap1_clk_init(void)
@@ -671,8 +649,13 @@ int __init omap1_clk_init(void)
struct clk ** clkp;
const struct omap_clock_config *info;
int crystal_type = 0; /* Default 12 MHz */
+ u32 reg;
+
+ /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
+ reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
+ omap_writew(reg, SOFT_REQ_REG);
+ omap_writew(0, SOFT_REQ_REG2);
- omap1_early_clk_reset();
clk_init(&omap1_clk_functions);
/* By default all idlect1 clocks are allowed to idle */
@@ -772,6 +755,12 @@ int __init omap1_clk_init(void)
omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
#endif
+ /* Amstrad Delta wants BCLK high when inactive */
+ if (machine_is_ams_delta())
+ omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
+ (1 << SDW_MCLK_INV_BIT),
+ ULPD_CLOCK_CTRL);
+
/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
/* (on 730, bit 13 must not be cleared) */
if (cpu_is_omap730())
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index b7c68819c4e..f7df00205c4 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -89,6 +89,7 @@ struct arm_idlect1_clk {
#define EN_DSPTIMCK 5
/* Various register defines for clock controls scattered around OMAP chip */
+#define SDW_MCLK_INV_BIT 2 /* In ULPD_CLKC_CTRL */
#define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */
#define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */
#define SWD_ULPD_PLL_CLK_REQ 1 /* In SWD_CLK_DIV_CTRL_SEL */
@@ -741,6 +742,18 @@ static struct clk i2c_fck = {
.disable = &omap1_clk_disable_generic,
};
+static struct clk i2c_ick = {
+ .name = "i2c_ick",
+ .id = 1,
+ .flags = CLOCK_IN_OMAP16XX |
+ VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
+ ALWAYS_ENABLED,
+ .parent = &armper_ck.clk,
+ .recalc = &followparent_recalc,
+ .enable = &omap1_clk_enable_generic,
+ .disable = &omap1_clk_disable_generic,
+};
+
static struct clk * onchip_clks[] = {
/* non-ULPD clocks */
&ck_ref,
@@ -790,6 +803,7 @@ static struct clk * onchip_clks[] = {
/* Virtual clocks */
&virtual_ck_mpu,
&i2c_fck,
+ &i2c_ick,
};
#endif
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index fa74ef7af15..5432335bc49 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -199,6 +199,17 @@ MUX_CFG("N14_1610_UWIRE_CS0", 8, 9, 1, 1, 21, 0, 1, 1, 1)
MUX_CFG("P15_1610_UWIRE_CS3", 8, 12, 1, 1, 22, 0, 1, 1, 1)
MUX_CFG("N15_1610_UWIRE_CS1", 7, 18, 2, 1, 14, 0, NA, 0, 1)
+/* OMAP-1610 SPI */
+MUX_CFG("U19_1610_SPIF_SCK", 7, 21, 6, 1, 15, 0, 1, 1, 1)
+MUX_CFG("U18_1610_SPIF_DIN", 8, 0, 6, 1, 18, 1, 1, 0, 1)
+MUX_CFG("P20_1610_SPIF_DIN", 6, 27, 4, 1, 7, 1, 1, 0, 1)
+MUX_CFG("W21_1610_SPIF_DOUT", 8, 3, 6, 1, 19, 0, 1, 0, 1)
+MUX_CFG("R18_1610_SPIF_DOUT", 7, 9, 3, 1, 11, 0, 1, 0, 1)
+MUX_CFG("N14_1610_SPIF_CS0", 8, 9, 6, 1, 21, 0, 1, 1, 1)
+MUX_CFG("N15_1610_SPIF_CS1", 7, 18, 6, 1, 14, 0, 1, 1, 1)
+MUX_CFG("T19_1610_SPIF_CS2", 7, 15, 4, 1, 13, 0, 1, 1, 1)
+MUX_CFG("P15_1610_SPIF_CS3", 8, 12, 3, 1, 22, 0, 1, 1, 1)
+
/* OMAP-1610 Flash */
MUX_CFG("L3_1610_FLASH_CS2B_OE",10, 6, 1, NA, 0, 0, NA, 0, 1)
MUX_CFG("M8_1610_FLASH_CS2B_WE",10, 3, 1, NA, 0, 0, NA, 0, 1)
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 7993b7bae2b..2db6b732b08 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -166,8 +166,8 @@ static struct omap_uart_config apollon_uart_config __initdata = {
static struct omap_mmc_config apollon_mmc_config __initdata = {
.mmc [0] = {
- .enabled = 0,
- .wire4 = 0,
+ .enabled = 1,
+ .wire4 = 1,
.wp_pin = -1,
.power_pin = -1,
.switch_pin = -1,
@@ -257,6 +257,9 @@ static void __init omap_apollon_init(void)
/* REVISIT: where's the correct place */
omap_cfg_reg(W19_24XX_SYS_NIRQ);
+ /* Use Interal loop-back in MMC/SDIO Module Input Clock selection */
+ CONTROL_DEVCONF |= (1 << 24);
+
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index d1b648a4efb..0de201c3d50 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -32,10 +32,14 @@
#include "memory.h"
#include "clock.h"
+#undef DEBUG
+
//#define DOWN_VARIABLE_DPLL 1 /* Experimental */
static struct prcm_config *curr_prcm_set;
static u32 curr_perf_level = PRCM_FULL_SPEED;
+static struct clk *vclk;
+static struct clk *sclk;
/*-------------------------------------------------------------------------
* Omap2 specific clock functions
@@ -79,6 +83,14 @@ static void omap2_propagate_rate(struct clk * clk)
propagate_rate(clk);
}
+static void omap2_set_osc_ck(int enable)
+{
+ if (enable)
+ PRCM_CLKSRC_CTRL &= ~(0x3 << 3);
+ else
+ PRCM_CLKSRC_CTRL |= 0x3 << 3;
+}
+
/* Enable an APLL if off */
static void omap2_clk_fixed_enable(struct clk *clk)
{
@@ -101,12 +113,54 @@ static void omap2_clk_fixed_enable(struct clk *clk)
else if (clk == &apll54_ck)
cval = (1 << 6);
- while (!CM_IDLEST_CKGEN & cval) { /* Wait for lock */
+ while (!(CM_IDLEST_CKGEN & cval)) { /* Wait for lock */
++i;
udelay(1);
- if (i == 100000)
+ if (i == 100000) {
+ printk(KERN_ERR "Clock %s didn't lock\n", clk->name);
+ break;
+ }
+ }
+}
+
+static void omap2_clk_wait_ready(struct clk *clk)
+{
+ unsigned long reg, other_reg, st_reg;
+ u32 bit;
+ int i;
+
+ reg = (unsigned long) clk->enable_reg;
+ if (reg == (unsigned long) &CM_FCLKEN1_CORE ||
+ reg == (unsigned long) &CM_FCLKEN2_CORE)
+ other_reg = (reg & ~0xf0) | 0x10;
+ else if (reg == (unsigned long) &CM_ICLKEN1_CORE ||
+ reg == (unsigned long) &CM_ICLKEN2_CORE)
+ other_reg = (reg & ~0xf0) | 0x00;
+ else
+ return;
+
+ /* No check for DSS or cam clocks */
+ if ((reg & 0x0f) == 0) {
+ if (clk->enable_bit <= 1 || clk->enable_bit == 31)
+ return;
+ }
+
+ /* Check if both functional and interface clocks
+ * are running. */
+ bit = 1 << clk->enable_bit;
+ if (!(__raw_readl(other_reg) & bit))
+ return;
+ st_reg = (other_reg & ~0xf0) | 0x20;
+ i = 0;
+ while (!(__raw_readl(st_reg) & bit)) {
+ i++;
+ if (i == 100000) {
+ printk(KERN_ERR "Timeout enabling clock %s\n", clk->name);
break;
+ }
}
+ if (i)
+ pr_debug("Clock %s stable after %d loops\n", clk->name, i);
}
/* Enables clock without considering parent dependencies or use count
@@ -119,6 +173,11 @@ static int _omap2_clk_enable(struct clk * clk)
if (clk->flags & ALWAYS_ENABLED)
return 0;
+ if (unlikely(clk == &osc_ck)) {
+ omap2_set_osc_ck(1);
+ return 0;
+ }
+
if (unlikely(clk->enable_reg == 0)) {
printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
clk->name);
@@ -133,6 +192,9 @@ static int _omap2_clk_enable(struct clk * clk)
regval32 = __raw_readl(clk->enable_reg);
regval32 |= (1 << clk->enable_bit);
__raw_writel(regval32, clk->enable_reg);
+ wmb();
+
+ omap2_clk_wait_ready(clk);
return 0;
}
@@ -155,6 +217,11 @@ static void _omap2_clk_disable(struct clk *clk)
{
u32 regval32;
+ if (unlikely(clk == &osc_ck)) {
+ omap2_set_osc_ck(0);
+ return;
+ }
+
if (clk->enable_reg == 0)
return;
@@ -166,6 +233,7 @@ static void _omap2_clk_disable(struct clk *clk)
regval32 = __raw_readl(clk->enable_reg);
regval32 &= ~(1 << clk->enable_bit);
__raw_writel(regval32, clk->enable_reg);
+ wmb();
}
static int omap2_clk_enable(struct clk *clk)
@@ -695,12 +763,14 @@ static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
reg_val = __raw_readl(reg);
reg_val &= ~(field_mask << div_off);
reg_val |= (field_val << div_off);
-
__raw_writel(reg_val, reg);
+ wmb();
clk->rate = clk->parent->rate / field_val;
- if (clk->flags & DELAYED_APP)
+ if (clk->flags & DELAYED_APP) {
__raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
+ wmb();
+ }
ret = 0;
} else if (clk->set_rate != 0)
ret = clk->set_rate(clk, rate);
@@ -836,10 +906,12 @@ static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
reg_val = __raw_readl(reg) & ~(field_mask << src_off);
reg_val |= (field_val << src_off);
__raw_writel(reg_val, reg);
+ wmb();
- if (clk->flags & DELAYED_APP)
+ if (clk->flags & DELAYED_APP) {
__raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
-
+ wmb();
+ }
if (clk->usecount > 0)
_omap2_clk_enable(clk);
@@ -953,12 +1025,29 @@ static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
* Omap2 clock reset and init functions
*-------------------------------------------------------------------------*/
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+static void __init omap2_clk_disable_unused(struct clk *clk)
+{
+ u32 regval32;
+
+ regval32 = __raw_readl(clk->enable_reg);
+ if ((regval32 & (1 << clk->enable_bit)) == 0)
+ return;
+
+ printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
+ _omap2_clk_disable(clk);
+}
+#else
+#define omap2_clk_disable_unused NULL
+#endif
+
static struct clk_functions omap2_clk_functions = {
.clk_enable = omap2_clk_enable,
.clk_disable = omap2_clk_disable,
.clk_round_rate = omap2_clk_round_rate,
.clk_set_rate = omap2_clk_set_rate,
.clk_set_parent = omap2_clk_set_parent,
+ .clk_disable_unused = omap2_clk_disable_unused,
};
static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys)
@@ -984,27 +1073,19 @@ static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys)
sys->rate = sclk;
}
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-static void __init omap2_disable_unused_clocks(void)
+/*
+ * Set clocks for bypass mode for reboot to work.
+ */
+void omap2_clk_prepare_for_reboot(void)
{
- struct clk *ck;
- u32 regval32;
+ u32 rate;
- list_for_each_entry(ck, &clocks, node) {
- if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) ||
- ck->enable_reg == 0)
- continue;
-
- regval32 = __raw_readl(ck->enable_reg);
- if ((regval32 & (1 << ck->enable_bit)) == 0)
- continue;
+ if (vclk == NULL || sclk == NULL)
+ return;
- printk(KERN_INFO "Disabling unused clock \"%s\"\n", ck->name);
- _omap2_clk_disable(ck);
- }
+ rate = clk_get_rate(sclk);
+ clk_set_rate(vclk, rate);
}
-late_initcall(omap2_disable_unused_clocks);
-#endif
/*
* Switch the MPU rate if specified on cmdline.
@@ -1077,8 +1158,27 @@ int __init omap2_clk_init(void)
*/
clk_enable(&sync_32k_ick);
clk_enable(&omapctrl_ick);
+
+ /* Force the APLLs active during bootup to avoid disabling and
+ * enabling them unnecessarily. */
+ clk_enable(&apll96_ck);
+ clk_enable(&apll54_ck);
+
if (cpu_is_omap2430())
clk_enable(&sdrc_ick);
+ /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
+ vclk = clk_get(NULL, "virt_prcm_set");
+ sclk = clk_get(NULL, "sys_ck");
+
+ return 0;
+}
+
+static int __init omap2_disable_aplls(void)
+{
+ clk_disable(&apll96_ck);
+ clk_disable(&apll54_ck);
+
return 0;
}
+late_initcall(omap2_disable_aplls);
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 2781dfbc516..8816f5a33a2 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -560,7 +560,7 @@ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */
.name = "osc_ck",
.rate = 26000000, /* fixed up in clock init */
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
- RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+ RATE_FIXED | RATE_PROPAGATES,
};
/* With out modem likely 12MHz, with modem likely 13MHz */
@@ -1368,7 +1368,8 @@ static struct clk mcbsp5_fck = {
};
static struct clk mcspi1_ick = {
- .name = "mcspi1_ick",
+ .name = "mcspi_ick",
+ .id = 1,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
@@ -1377,7 +1378,8 @@ static struct clk mcspi1_ick = {
};
static struct clk mcspi1_fck = {
- .name = "mcspi1_fck",
+ .name = "mcspi_fck",
+ .id = 1,
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
@@ -1386,7 +1388,8 @@ static struct clk mcspi1_fck = {
};
static struct clk mcspi2_ick = {
- .name = "mcspi2_ick",
+ .name = "mcspi_ick",
+ .id = 2,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
@@ -1395,7 +1398,8 @@ static struct clk mcspi2_ick = {
};
static struct clk mcspi2_fck = {
- .name = "mcspi2_fck",
+ .name = "mcspi_fck",
+ .id = 2,
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
@@ -1404,7 +1408,8 @@ static struct clk mcspi2_fck = {
};
static struct clk mcspi3_ick = {
- .name = "mcspi3_ick",
+ .name = "mcspi_ick",
+ .id = 3,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
@@ -1413,7 +1418,8 @@ static struct clk mcspi3_ick = {
};
static struct clk mcspi3_fck = {
- .name = "mcspi3_fck",
+ .name = "mcspi_fck",
+ .id = 3,
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index c7a48f921fe..f4f04d87df3 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -13,6 +13,8 @@
#include <linux/init.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/ioport.h>
+#include <linux/spinlock.h>
#include <asm/io.h>
#include <asm/arch/gpmc.h>
@@ -41,6 +43,19 @@
#define GPMC_CS0 0x60
#define GPMC_CS_SIZE 0x30
+#define GPMC_CS_NUM 8
+#define GPMC_MEM_START 0x00000000
+#define GPMC_MEM_END 0x3FFFFFFF
+#define BOOT_ROM_SPACE 0x100000 /* 1MB */
+
+#define GPMC_CHUNK_SHIFT 24 /* 16 MB */
+#define GPMC_SECTION_SHIFT 28 /* 128 MB */
+
+static struct resource gpmc_mem_root;
+static struct resource gpmc_cs_mem[GPMC_CS_NUM];
+static spinlock_t gpmc_mem_lock = SPIN_LOCK_UNLOCKED;
+static unsigned gpmc_cs_map;
+
static void __iomem *gpmc_base =
(void __iomem *) IO_ADDRESS(GPMC_BASE);
static void __iomem *gpmc_cs_base =
@@ -187,9 +202,168 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
return 0;
}
-unsigned long gpmc_cs_get_base_addr(int cs)
+static void gpmc_cs_enable_mem(int cs, u32 base, u32 size)
+{
+ u32 l;
+ u32 mask;
+
+ mask = (1 << GPMC_SECTION_SHIFT) - size;
+ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+ l &= ~0x3f;
+ l = (base >> GPMC_CHUNK_SHIFT) & 0x3f;
+ l &= ~(0x0f << 8);
+ l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8;
+ l |= 1 << 6; /* CSVALID */
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
+}
+
+static void gpmc_cs_disable_mem(int cs)
+{
+ u32 l;
+
+ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+ l &= ~(1 << 6); /* CSVALID */
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
+}
+
+static void gpmc_cs_get_memconf(int cs, u32 *base, u32 *size)
+{
+ u32 l;
+ u32 mask;
+
+ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+ *base = (l & 0x3f) << GPMC_CHUNK_SHIFT;
+ mask = (l >> 8) & 0x0f;
+ *size = (1 << GPMC_SECTION_SHIFT) - (mask << GPMC_CHUNK_SHIFT);
+}
+
+static int gpmc_cs_mem_enabled(int cs)
+{
+ u32 l;
+
+ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+ return l & (1 << 6);
+}
+
+static void gpmc_cs_set_reserved(int cs, int reserved)
{
- return (gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7) & 0x1f) << 24;
+ gpmc_cs_map &= ~(1 << cs);
+ gpmc_cs_map |= (reserved ? 1 : 0) << cs;
+}
+
+static int gpmc_cs_reserved(int cs)
+{
+ return gpmc_cs_map & (1 << cs);
+}
+
+static unsigned long gpmc_mem_align(unsigned long size)
+{
+ int order;
+
+ size = (size - 1) >> (GPMC_CHUNK_SHIFT - 1);
+ order = GPMC_CHUNK_SHIFT - 1;
+ do {
+ size >>= 1;
+ order++;
+ } while (size);
+ size = 1 << order;
+ return size;
+}
+
+static int gpmc_cs_insert_mem(int cs, unsigned long base, unsigned long size)
+{
+ struct resource *res = &gpmc_cs_mem[cs];
+ int r;
+
+ size = gpmc_mem_align(size);
+ spin_lock(&gpmc_mem_lock);
+ res->start = base;
+ res->end = base + size - 1;
+ r = request_resource(&gpmc_mem_root, res);
+ spin_unlock(&gpmc_mem_lock);
+
+ return r;
+}
+
+int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
+{
+ struct resource *res = &gpmc_cs_mem[cs];
+ int r = -1;
+
+ if (cs > GPMC_CS_NUM)
+ return -ENODEV;
+
+ size = gpmc_mem_align(size);
+ if (size > (1 << GPMC_SECTION_SHIFT))
+ return -ENOMEM;
+
+ spin_lock(&gpmc_mem_lock);
+ if (gpmc_cs_reserved(cs)) {
+ r = -EBUSY;
+ goto out;
+ }
+ if (gpmc_cs_mem_enabled(cs))
+ r = adjust_resource(res, res->start & ~(size - 1), size);
+ if (r < 0)
+ r = allocate_resource(&gpmc_mem_root, res, size, 0, ~0,
+ size, NULL, NULL);
+ if (r < 0)
+ goto out;
+
+ gpmc_cs_enable_mem(cs, res->start, res->end - res->start + 1);
+ *base = res->start;
+ gpmc_cs_set_reserved(cs, 1);
+out:
+ spin_unlock(&gpmc_mem_lock);
+ return r;
+}
+
+void gpmc_cs_free(int cs)
+{
+ spin_lock(&gpmc_mem_lock);
+ if (cs >= GPMC_CS_NUM || !gpmc_cs_reserved(cs)) {
+ printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
+ BUG();
+ spin_unlock(&gpmc_mem_lock);
+ return;
+ }
+ gpmc_cs_disable_mem(cs);
+ release_resource(&gpmc_cs_mem[cs]);
+ gpmc_cs_set_reserved(cs, 0);
+ spin_unlock(&gpmc_mem_lock);
+}
+
+void __init gpmc_mem_init(void)
+{
+ int cs;
+ unsigned long boot_rom_space = 0;
+
+ if (cpu_is_omap242x()) {
+ u32 l;
+ l = omap_readl(OMAP242X_CONTROL_STATUS);
+ /* In case of internal boot the 1st MB is redirected to the
+ * boot ROM memory space.
+ */
+ if (l & (1 << 3))
+ boot_rom_space = BOOT_ROM_SPACE;
+ } else
+ /* We assume internal boot if the mode can't be
+ * determined.
+ */
+ boot_rom_space = BOOT_ROM_SPACE;
+ gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space;
+ gpmc_mem_root.end = GPMC_MEM_END;
+
+ /* Reserve all regions that has been set up by bootloader */
+ for (cs = 0; cs < GPMC_CS_NUM; cs++) {
+ u32 base, size;
+
+ if (!gpmc_cs_mem_enabled(cs))
+ continue;
+ gpmc_cs_get_memconf(cs, &base, &size);
+ if (gpmc_cs_insert_mem(cs, base, size) < 0)
+ BUG();
+ }
}
void __init gpmc_init(void)
@@ -206,4 +380,6 @@ void __init gpmc_init(void)
l &= 0x03 << 3;
l |= (0x02 << 3) | (1 << 0);
gpmc_write_reg(GPMC_SYSCONFIG, l);
+
+ gpmc_mem_init();
}
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index dfc3b35cc1f..1ed2fff4691 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -41,18 +41,6 @@ static struct omap_irq_bank {
.nr_irqs = 96,
}, {
/* XXX: DSP INTC */
-
-#if 0
- /*
- * Commented out for now until we fix the IVA clocking
- */
-#ifdef CONFIG_ARCH_OMAP2420
- }, {
- /* IVA INTC (2420 only) */
- .base_reg = OMAP24XX_IVA_INTC_BASE,
- .nr_irqs = 16, /* Actually 32, but only 16 are used */
-#endif
-#endif
}
};
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 60ef084faff..f538d0fdb13 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -104,6 +104,20 @@ MUX_CFG_24XX("P20_24XX_TSC_IRQ", 0x108, 0, 0, 0, 1)
MUX_CFG_24XX("K15_24XX_UART3_TX", 0x118, 0, 0, 0, 1)
MUX_CFG_24XX("K14_24XX_UART3_RX", 0x119, 0, 0, 0, 1)
+/* MMC/SDIO */
+MUX_CFG_24XX("G19_24XX_MMC_CLKO", 0x0f3, 0, 0, 0, 1)
+MUX_CFG_24XX("H18_24XX_MMC_CMD", 0x0f4, 0, 0, 0, 1)
+MUX_CFG_24XX("F20_24XX_MMC_DAT0", 0x0f5, 0, 0, 0, 1)
+MUX_CFG_24XX("H14_24XX_MMC_DAT1", 0x0f6, 0, 0, 0, 1)
+MUX_CFG_24XX("E19_24XX_MMC_DAT2", 0x0f7, 0, 0, 0, 1)
+MUX_CFG_24XX("D19_24XX_MMC_DAT3", 0x0f8, 0, 0, 0, 1)
+MUX_CFG_24XX("F19_24XX_MMC_DAT_DIR0", 0x0f9, 0, 0, 0, 1)
+MUX_CFG_24XX("E20_24XX_MMC_DAT_DIR1", 0x0fa, 0, 0, 0, 1)
+MUX_CFG_24XX("F18_24XX_MMC_DAT_DIR2", 0x0fb, 0, 0, 0, 1)
+MUX_CFG_24XX("E18_24XX_MMC_DAT_DIR3", 0x0fc, 0, 0, 0, 1)
+MUX_CFG_24XX("G18_24XX_MMC_CMD_DIR", 0x0fd, 0, 0, 0, 1)
+MUX_CFG_24XX("H15_24XX_MMC_CLKI", 0x0fe, 0, 0, 0, 1)
+
/* Keypad GPIO*/
MUX_CFG_24XX("T19_24XX_KBR0", 0x106, 3, 1, 1, 1)
MUX_CFG_24XX("R19_24XX_KBR1", 0x107, 3, 1, 1, 1)
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index c2bf57ef682..90f530540c6 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -19,6 +19,8 @@
#include "prcm-regs.h"
+extern void omap2_clk_prepare_for_reboot(void);
+
u32 omap_prcm_get_reset_sources(void)
{
return RM_RSTST_WKUP & 0x7f;
@@ -28,12 +30,6 @@ EXPORT_SYMBOL(omap_prcm_get_reset_sources);
/* Resets clock rates and reboots the system. Only called from system.h */
void omap_prcm_arch_reset(char mode)
{
- u32 rate;
- struct clk *vclk, *sclk;
-
- vclk = clk_get(NULL, "virt_prcm_set");
- sclk = clk_get(NULL, "sys_ck");
- rate = clk_get_rate(sclk);
- clk_set_rate(vclk, rate); /* go to bypass for OMAP limitation */
+ omap2_clk_prepare_for_reboot();
RM_RSTCTRL_WKUP |= 2;
}
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index bbd138be6a7..df37594c30f 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -2,6 +2,13 @@ if ARCH_S3C2410
menu "S3C24XX Implementations"
+config MACH_AML_M5900
+ bool "AML M5900 Series"
+ select CPU_S3C2410
+ help
+ Say Y here if you are using the American Microsystems M5900 Series
+ <http://www.amltd.com>
+
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select CPU_S3C2440
@@ -126,6 +133,12 @@ config MACH_NEXCODER_2440
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
+config MACH_VSTMS
+ bool "VMSTMS"
+ select CPU_S3C2412
+ help
+ Say Y here if you are using an VSTMS board
+
endmenu
config S3C2410_CLOCK
@@ -133,10 +146,24 @@ config S3C2410_CLOCK
help
Clock code for the S3C2410, and similar processors
+config S3C2410_PM
+ bool
+ depends on CONFIG_PM
+ help
+ Power Management code common to S3C2410 and better
+
+config CPU_S3C2410_DMA
+ bool
+ depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
+ default y if CPU_S3C2410 || CPU_S3C2442
+ help
+ DMA device selection for S3C2410 and compatible CPUs
+
config CPU_S3C2410
bool
depends on ARCH_S3C2410
select S3C2410_CLOCK
+ select S3C2410_PM
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
@@ -149,6 +176,13 @@ config CPU_S3C2412_ONLY
!CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412
default y if CPU_S3C2412
+config S3C2412_PM
+ bool
+ default y if PM
+ depends on CPU_S3C2412
+ help
+ Internal config node to apply S3C2412 power management
+
config CPU_S3C2412
bool
depends on ARCH_S3C2410
@@ -165,6 +199,7 @@ config CPU_S3C2440
bool
depends on ARCH_S3C2410
select S3C2410_CLOCK
+ select S3C2410_PM
select CPU_S3C244X
help
Support for S3C2440 Samsung Mobile CPU based systems.
@@ -173,6 +208,7 @@ config CPU_S3C2442
bool
depends on ARCH_S3C2420
select S3C2410_CLOCK
+ select S3C2410_PM
select CPU_S3C244X
help
Support for S3C2442 Samsung Mobile CPU based systems.
@@ -256,7 +292,7 @@ config S3C2410_PM_CHECK_CHUNKSIZE
config PM_SIMTEC
bool
- depends on PM && (ARCH_BAST || MACH_VR1000)
+ depends on PM && (ARCH_BAST || MACH_VR1000 || MACH_AML_M5900)
default y
config S3C2410_LOWLEVEL_UART_PORT
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 0eadec91621..d66013365b6 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -9,6 +9,8 @@ obj-y := cpu.o irq.o time.o gpio.o clock.o devs.o
obj-m :=
obj-n :=
obj- :=
+obj-dma-y :=
+obj-dma-n :=
# DMA
obj-$(CONFIG_S3C2410_DMA) += dma.o
@@ -20,6 +22,10 @@ obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o
+obj-$(CONFIG_CPU_S3C2410) += s3c2410-irq.o
+
+obj-$(CONFIG_S3C2410_PM) += s3c2410-pm.o s3c2410-sleep.o
+obj-$(CONFIG_CPU_S3C2410_DMA) += s3c2410-dma.o
# Power Management support
@@ -30,6 +36,9 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
obj-$(CONFIG_CPU_S3C2412) += s3c2412-irq.o
obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o
+obj-dma-$(CONFIG_CPU_S3C2412) += s3c2412-dma.o
+
+obj-$(CONFIG_S3C2412_PM) += s3c2412-pm.o
#
# S3C244X support
@@ -47,6 +56,7 @@ obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o
obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o
+obj-dma-$(CONFIG_CPU_S3C2440) += s3c2440-dma.o
# S3C2442 support
@@ -57,8 +67,13 @@ obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o
obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
+# merge in dma objects
+
+obj-y += $(obj-dma-y)
+
# machine specific support
+obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o
obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
@@ -71,5 +86,6 @@ obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
obj-$(CONFIG_MACH_OTOM) += mach-otom.o
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
+obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
obj-$(CONFIG_MACH_SMDK) += common-smdk.o \ No newline at end of file
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index def4441d244..440e9aa0211 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -18,10 +18,6 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Modifications:
- * 08-Jan-2003 BJD Moved from central IRQ code
- * 21-Aug-2005 BJD Fixed missing code and compile errors
*/
diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c
index 1c3c6adae6c..9d4899eddf1 100644
--- a/arch/arm/mach-s3c2410/cpu.c
+++ b/arch/arm/mach-s3c2410/cpu.c
@@ -124,6 +124,15 @@ static struct cpu_table cpu_ids[] __initdata = {
.init = s3c2412_init,
.name = name_s3c2412,
},
+ { /* a newer version of the s3c2412 */
+ .idcode = 0x32412003,
+ .idmask = 0xffffffff,
+ .map_io = s3c2412_map_io,
+ .init_clocks = s3c2412_init_clocks,
+ .init_uarts = s3c2412_init_uarts,
+ .init = s3c2412_init,
+ .name = name_s3c2412,
+ },
{
.idcode = 0x0, /* S3C2400 doesn't have an idcode */
.idmask = 0xffffffff,
diff --git a/arch/arm/mach-s3c2410/devs.h b/arch/arm/mach-s3c2410/devs.h
index 726e2eaf879..14fb0bade71 100644
--- a/arch/arm/mach-s3c2410/devs.h
+++ b/arch/arm/mach-s3c2410/devs.h
@@ -8,11 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Modifications:
- * 18-Aug-2004 BJD Created initial version
- * 27-Aug-2004 BJD Added timers 0 through 3
- * 10-Feb-2005 BJD Added camera from guillaume.gourat@nexvision.tv
*/
#include <linux/platform_device.h>
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index cc92a7b2db8..d264bbbd8be 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -1,35 +1,16 @@
-/* linux/arch/arm/mach-bast/dma.c
+/* linux/arch/arm/mach-s3c2410/dma.c
*
- * (c) 2003-2005 Simtec Electronics
+ * (c) 2003-2005,2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 DMA core
*
- * http://www.simtec.co.uk/products/EB2410ITX/
+ * http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Changelog:
- * 27-Feb-2005 BJD Added kmem cache for dma descriptors
- * 18-Nov-2004 BJD Removed error for loading onto stopped channel
- * 10-Nov-2004 BJD Ensure all external symbols exported for modules
- * 10-Nov-2004 BJD Use sys_device and sysdev_class for power management
- * 08-Aug-2004 BJD Apply rmk's suggestions
- * 21-Jul-2004 BJD Ported to linux 2.6
- * 12-Jul-2004 BJD Finished re-write and change of API
- * 06-Jul-2004 BJD Rewrote dma code to try and cope with various problems
- * 23-May-2003 BJD Created file
- * 19-Aug-2003 BJD Cleanup, header fix, added URL
- *
- * This file is based on the Sangwook Lee/Samsung patches, re-written due
- * to various ommisions from the code (such as flexible dma configuration)
- * for use with the BAST system board.
- *
- * The re-write is pretty much complete, and should be good enough for any
- * possible DMA function
- */
+*/
#ifdef CONFIG_S3C2410_DMA_DEBUG
@@ -55,10 +36,14 @@
#include <asm/mach/dma.h>
#include <asm/arch/map.h>
+#include "dma.h"
+
/* io map for dma */
static void __iomem *dma_base;
static kmem_cache_t *dma_kmem;
+struct s3c24xx_dma_selection dma_sel;
+
/* dma channel state information */
struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
@@ -79,7 +64,6 @@ dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
writel(val, dma_regaddr(chan, reg));
}
-
#endif
#define dma_rdreg(chan, reg) readl((chan)->regs + (reg))
@@ -151,12 +135,20 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
#define dbg_showchan(chan) do { } while(0)
#endif /* CONFIG_S3C2410_DMA_DEBUG */
-#define check_channel(chan) \
- do { if ((chan) >= S3C2410_DMA_CHANNELS) { \
- printk(KERN_ERR "%s: invalid channel %d\n", __FUNCTION__, (chan)); \
- return -EINVAL; \
- } } while(0)
+static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
+/* lookup_dma_channel
+ *
+ * change the dma channel number given into a real dma channel id
+*/
+
+static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
+{
+ if (channel & DMACH_LOW_LEVEL)
+ return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+ else
+ return dma_chan_map[channel];
+}
/* s3c2410_dma_stats_timeout
*
@@ -321,8 +313,10 @@ static inline void
s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
enum s3c2410_dma_buffresult result)
{
+#if 0
pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
chan->callback_fn, buf, buf->id, buf->size, result);
+#endif
if (chan->callback_fn != NULL) {
(chan->callback_fn)(chan, buf->id, buf->size, result);
@@ -439,7 +433,6 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
return 0;
}
-
/* s3c2410_dma_enqueue
*
* queue an given buffer for dma transfer.
@@ -460,11 +453,12 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
int s3c2410_dma_enqueue(unsigned int channel, void *id,
dma_addr_t data, int size)
{
- struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
struct s3c2410_dma_buf *buf;
unsigned long flags;
- check_channel(channel);
+ if (chan == NULL)
+ return -EINVAL;
pr_debug("%s: id=%p, data=%08x, size=%d\n",
__FUNCTION__, id, (unsigned int)data, size);
@@ -562,8 +556,10 @@ s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
static inline void
s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
{
+#if 0
pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
chan->number, chan->load_state);
+#endif
switch (chan->load_state) {
case S3C2410_DMALOAD_NONE:
@@ -718,7 +714,8 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs)
if (chan->load_state == S3C2410_DMALOAD_NONE) {
pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
chan->number, jiffies);
- s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
+ s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
+ S3C2410_DMAOP_STOP);
}
}
@@ -726,37 +723,34 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs)
return IRQ_HANDLED;
}
+static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
+
/* s3c2410_request_dma
*
* get control of an dma channel
*/
-int s3c2410_dma_request(unsigned int channel, struct s3c2410_dma_client *client,
+int s3c2410_dma_request(unsigned int channel,
+ struct s3c2410_dma_client *client,
void *dev)
{
- struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+ struct s3c2410_dma_chan *chan;
unsigned long flags;
int err;
pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
channel, client->name, dev);
- check_channel(channel);
-
local_irq_save(flags);
- dbg_showchan(chan);
-
- if (chan->in_use) {
- if (client != chan->client) {
- printk(KERN_ERR "dma%d: already in use\n", channel);
- local_irq_restore(flags);
- return -EBUSY;
- } else {
- printk(KERN_ERR "dma%d: client already has channel\n", channel);
- }
+ chan = s3c2410_dma_map_channel(channel);
+ if (chan == NULL) {
+ local_irq_restore(flags);
+ return -EBUSY;
}
+ dbg_showchan(chan);
+
chan->client = client;
chan->in_use = 1;
@@ -809,14 +803,14 @@ EXPORT_SYMBOL(s3c2410_dma_request);
int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
{
- struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
unsigned long flags;
- check_channel(channel);
+ if (chan == NULL)
+ return -EINVAL;
local_irq_save(flags);
-
if (chan->client != client) {
printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
channel, chan->client, client);
@@ -837,8 +831,12 @@ int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
if (chan->irq_claimed)
free_irq(chan->irq, (void *)chan);
+
chan->irq_claimed = 0;
+ if (!(channel & DMACH_LOW_LEVEL))
+ dma_chan_map[channel] = NULL;
+
local_irq_restore(flags);
return 0;
@@ -848,8 +846,8 @@ EXPORT_SYMBOL(s3c2410_dma_free);
static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
{
- unsigned long tmp;
unsigned long flags;
+ unsigned long tmp;
pr_debug("%s:\n", __FUNCTION__);
@@ -997,9 +995,10 @@ s3c2410_dma_started(struct s3c2410_dma_chan *chan)
int
s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
{
- struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
- check_channel(channel);
+ if (chan == NULL)
+ return -EINVAL;
switch (op) {
case S3C2410_DMAOP_START:
@@ -1046,12 +1045,19 @@ int s3c2410_dma_config(dmach_t channel,
int xferunit,
int dcon)
{
- struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
__FUNCTION__, channel, xferunit, dcon);
- check_channel(channel);
+ if (chan == NULL)
+ return -EINVAL;
+
+ printk("Initial dcon is %08x\n", dcon);
+
+ dcon |= chan->dcon & dma_sel.dcon_mask;
+
+ printk("New dcon is %08x\n", dcon);
switch (xferunit) {
case 1:
@@ -1086,9 +1092,10 @@ EXPORT_SYMBOL(s3c2410_dma_config);
int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
{
- struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
- check_channel(channel);
+ if (chan == NULL)
+ return -EINVAL;
pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags);
@@ -1106,9 +1113,10 @@ EXPORT_SYMBOL(s3c2410_dma_setflags);
int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
{
- struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
- check_channel(channel);
+ if (chan == NULL)
+ return -EINVAL;
pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn);
@@ -1121,9 +1129,10 @@ EXPORT_SYMBOL(s3c2410_dma_set_opfn);
int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
{
- struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
- check_channel(channel);
+ if (chan == NULL)
+ return -EINVAL;
pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn);
@@ -1153,9 +1162,10 @@ int s3c2410_dma_devconfig(int channel,
int hwcfg,
unsigned long devaddr)
{
- struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
- check_channel(channel);
+ if (chan == NULL)
+ return -EINVAL;
pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
__FUNCTION__, (int)source, hwcfg, devaddr);
@@ -1200,9 +1210,10 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig);
int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
{
- struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
- check_channel(channel);
+ if (chan == NULL)
+ return -EINVAL;
if (src != NULL)
*src = dma_rdreg(chan, S3C2410_DMA_DCSRC);
@@ -1252,7 +1263,7 @@ static int s3c2410_dma_resume(struct sys_device *dev)
#define s3c2410_dma_resume NULL
#endif /* CONFIG_PM */
-static struct sysdev_class dma_sysclass = {
+struct sysdev_class dma_sysclass = {
set_kset_name("s3c24xx-dma"),
.suspend = s3c2410_dma_suspend,
.resume = s3c2410_dma_resume,
@@ -1265,7 +1276,6 @@ static void s3c2410_dma_cache_ctor(void *p, kmem_cache_t *c, unsigned long f)
memset(p, 0, sizeof(struct s3c2410_dma_buf));
}
-
/* initialisation code */
static int __init s3c2410_init_dma(void)
@@ -1274,7 +1284,7 @@ static int __init s3c2410_init_dma(void)
int channel;
int ret;
- printk("S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics\n");
+ printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
dma_base = ioremap(S3C24XX_PA_DMA, 0x200);
if (dma_base == NULL) {
@@ -1282,6 +1292,8 @@ static int __init s3c2410_init_dma(void)
return -ENOMEM;
}
+ printk("Registering sysclass\n");
+
ret = sysdev_class_register(&dma_sysclass);
if (ret != 0) {
printk(KERN_ERR "dma sysclass registration failed\n");
@@ -1335,4 +1347,95 @@ static int __init s3c2410_init_dma(void)
return ret;
}
-__initcall(s3c2410_init_dma);
+core_initcall(s3c2410_init_dma);
+
+static inline int is_channel_valid(unsigned int channel)
+{
+ return (channel & DMA_CH_VALID);
+}
+
+/* s3c2410_dma_map_channel()
+ *
+ * turn the virtual channel number into a real, and un-used hardware
+ * channel.
+ *
+ * currently this code uses first-free channel from the specified harware
+ * map, not taking into account anything that the board setup code may
+ * have to say about the likely peripheral set to be in use.
+*/
+
+struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
+{
+ struct s3c24xx_dma_map *ch_map;
+ struct s3c2410_dma_chan *dmach;
+ int ch;
+
+ if (dma_sel.map == NULL || channel > dma_sel.map_size)
+ return NULL;
+
+ ch_map = dma_sel.map + channel;
+
+ for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) {
+ if (!is_channel_valid(ch_map->channels[ch]))
+ continue;
+
+ if (s3c2410_chans[ch].in_use == 0) {
+ printk("mapped channel %d to %d\n", channel, ch);
+ break;
+ }
+ }
+
+ if (ch >= S3C2410_DMA_CHANNELS)
+ return NULL;
+
+ /* update our channel mapping */
+
+ dmach = &s3c2410_chans[ch];
+ dma_chan_map[channel] = dmach;
+
+ /* select the channel */
+
+ (dma_sel.select)(dmach, ch_map);
+
+ return dmach;
+}
+
+static void s3c24xx_dma_show_ch(struct s3c24xx_dma_map *map, int ch)
+{
+ /* show the channel configuration */
+
+ printk("%2d: %20s, channels %c%c%c%c\n", ch, map->name,
+ (is_channel_valid(map->channels[0]) ? '0' : '-'),
+ (is_channel_valid(map->channels[1]) ? '1' : '-'),
+ (is_channel_valid(map->channels[2]) ? '2' : '-'),
+ (is_channel_valid(map->channels[3]) ? '3' : '-'));
+}
+
+static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch)
+{
+ if (1)
+ s3c24xx_dma_show_ch(map, ch);
+
+ return 0;
+}
+
+int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
+{
+ struct s3c24xx_dma_map *nmap;
+ size_t map_sz = sizeof(*nmap) * sel->map_size;
+ int ptr;
+
+ nmap = kmalloc(map_sz, GFP_KERNEL);
+ if (nmap == NULL)
+ return -ENOMEM;
+
+ memcpy(nmap, sel->map, map_sz);
+ memcpy(&dma_sel, sel, sizeof(*sel));
+
+ dma_sel.map = nmap;
+
+ for (ptr = 0; ptr < sel->map_size; ptr++)
+ s3c24xx_dma_check_entry(nmap+ptr, ptr);
+
+ return 0;
+}
diff --git a/arch/arm/mach-s3c2410/dma.h b/arch/arm/mach-s3c2410/dma.h
new file mode 100644
index 00000000000..0ebfe0aab80
--- /dev/null
+++ b/arch/arm/mach-s3c2410/dma.h
@@ -0,0 +1,45 @@
+/* arch/arm/mach-s3c2410/dma.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern struct sysdev_class dma_sysclass;
+extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+
+#define DMA_CH_VALID (1<<31)
+
+struct s3c24xx_dma_addr {
+ unsigned long from;
+ unsigned long to;
+};
+
+/* struct s3c24xx_dma_map
+ *
+ * this holds the mapping information for the channel selected
+ * to be connected to the specified device
+*/
+
+struct s3c24xx_dma_map {
+ const char *name;
+ struct s3c24xx_dma_addr hw_addr;
+
+ unsigned long channels[S3C2410_DMA_CHANNELS];
+};
+
+struct s3c24xx_dma_selection {
+ struct s3c24xx_dma_map *map;
+ unsigned long map_size;
+ unsigned long dcon_mask;
+
+ void (*select)(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map);
+};
+
+extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index cd39e868458..db6393c9986 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -18,21 +18,7 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Changelog
- * 13-Sep-2004 BJD Implemented change of MISCCR
- * 14-Sep-2004 BJD Added getpin call
- * 14-Sep-2004 BJD Fixed bug in setpin() call
- * 30-Sep-2004 BJD Fixed cfgpin() mask bug
- * 01-Oct-2004 BJD Added getcfg() to get pin configuration
- * 01-Oct-2004 BJD Fixed mask bug in pullup() call
- * 01-Oct-2004 BJD Added getirq() to turn pin into irqno
- * 04-Oct-2004 BJD Added irq filter controls for GPIO
- * 05-Nov-2004 BJD EXPORT_SYMBOL() added for all code
- * 13-Mar-2005 BJD Updates for __iomem
- * 26-Oct-2005 BJD Added generic configuration types
- * 15-Jan-2006 LCVR Added support for the S3C2400
- */
+*/
#include <linux/kernel.h>
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index cd6139b3599..3e9f3462c61 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -181,17 +181,19 @@ s3c_irq_unmask(unsigned int irqno)
}
struct irqchip s3c_irq_level_chip = {
- .ack = s3c_irq_maskack,
- .mask = s3c_irq_mask,
- .unmask = s3c_irq_unmask,
- .set_wake = s3c_irq_wake
+ .name = "s3c-level",
+ .ack = s3c_irq_maskack,
+ .mask = s3c_irq_mask,
+ .unmask = s3c_irq_unmask,
+ .set_wake = s3c_irq_wake
};
static struct irqchip s3c_irq_chip = {
- .ack = s3c_irq_ack,
- .mask = s3c_irq_mask,
- .unmask = s3c_irq_unmask,
- .set_wake = s3c_irq_wake
+ .name = "s3c",
+ .ack = s3c_irq_ack,
+ .mask = s3c_irq_mask,
+ .unmask = s3c_irq_unmask,
+ .set_wake = s3c_irq_wake
};
static void
@@ -343,19 +345,21 @@ s3c_irqext_type(unsigned int irq, unsigned int type)
}
static struct irqchip s3c_irqext_chip = {
- .mask = s3c_irqext_mask,
- .unmask = s3c_irqext_unmask,
- .ack = s3c_irqext_ack,
- .set_type = s3c_irqext_type,
- .set_wake = s3c_irqext_wake
+ .name = "s3c-ext",
+ .mask = s3c_irqext_mask,
+ .unmask = s3c_irqext_unmask,
+ .ack = s3c_irqext_ack,
+ .set_type = s3c_irqext_type,
+ .set_wake = s3c_irqext_wake
};
static struct irqchip s3c_irq_eint0t4 = {
- .ack = s3c_irq_ack,
- .mask = s3c_irq_mask,
- .unmask = s3c_irq_unmask,
- .set_wake = s3c_irq_wake,
- .set_type = s3c_irqext_type,
+ .name = "s3c-ext0",
+ .ack = s3c_irq_ack,
+ .mask = s3c_irq_mask,
+ .unmask = s3c_irq_unmask,
+ .set_wake = s3c_irq_wake,
+ .set_type = s3c_irqext_type,
};
/* mask values for the parent registers for each of the interrupt types */
@@ -387,9 +391,10 @@ s3c_irq_uart0_ack(unsigned int irqno)
}
static struct irqchip s3c_irq_uart0 = {
- .mask = s3c_irq_uart0_mask,
- .unmask = s3c_irq_uart0_unmask,
- .ack = s3c_irq_uart0_ack,
+ .name = "s3c-uart0",
+ .mask = s3c_irq_uart0_mask,
+ .unmask = s3c_irq_uart0_unmask,
+ .ack = s3c_irq_uart0_ack,
};
/* UART1 */
@@ -413,9 +418,10 @@ s3c_irq_uart1_ack(unsigned int irqno)
}
static struct irqchip s3c_irq_uart1 = {
- .mask = s3c_irq_uart1_mask,
- .unmask = s3c_irq_uart1_unmask,
- .ack = s3c_irq_uart1_ack,
+ .name = "s3c-uart1",
+ .mask = s3c_irq_uart1_mask,
+ .unmask = s3c_irq_uart1_unmask,
+ .ack = s3c_irq_uart1_ack,
};
/* UART2 */
@@ -439,9 +445,10 @@ s3c_irq_uart2_ack(unsigned int irqno)
}
static struct irqchip s3c_irq_uart2 = {
- .mask = s3c_irq_uart2_mask,
- .unmask = s3c_irq_uart2_unmask,
- .ack = s3c_irq_uart2_ack,
+ .name = "s3c-uart2",
+ .mask = s3c_irq_uart2_mask,
+ .unmask = s3c_irq_uart2_unmask,
+ .ack = s3c_irq_uart2_ack,
};
/* ADC and Touchscreen */
@@ -465,9 +472,10 @@ s3c_irq_adc_ack(unsigned int irqno)
}
static struct irqchip s3c_irq_adc = {
- .mask = s3c_irq_adc_mask,
- .unmask = s3c_irq_adc_unmask,
- .ack = s3c_irq_adc_ack,
+ .name = "s3c-adc",
+ .mask = s3c_irq_adc_mask,
+ .unmask = s3c_irq_adc_unmask,
+ .ack = s3c_irq_adc_ack,
};
/* irq demux for adc */
@@ -569,23 +577,104 @@ s3c_irq_demux_uart2(unsigned int irq,
}
static void
-s3c_irq_demux_extint(unsigned int irq,
- struct irqdesc *desc,
- struct pt_regs *regs)
+s3c_irq_demux_extint8(unsigned int irq,
+ struct irqdesc *desc,
+ struct pt_regs *regs)
{
unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
eintpnd &= ~eintmsk;
+ eintpnd &= ~0xff; /* ignore lower irqs */
- if (eintpnd) {
- irq = fls(eintpnd);
- irq += (IRQ_EINT4 - (4 + 1));
+ /* we may as well handle all the pending IRQs here */
+ while (eintpnd) {
+ irq = __ffs(eintpnd);
+ eintpnd &= ~(1<<irq);
+
+ irq += (IRQ_EINT4 - 4);
desc_handle_irq(irq, irq_desc + irq, regs);
}
+
+}
+
+static void
+s3c_irq_demux_extint4t7(unsigned int irq,
+ struct irqdesc *desc,
+ struct pt_regs *regs)
+{
+ unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
+ unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
+
+ eintpnd &= ~eintmsk;
+ eintpnd &= 0xff; /* only lower irqs */
+
+ /* we may as well handle all the pending IRQs here */
+
+ while (eintpnd) {
+ irq = __ffs(eintpnd);
+ eintpnd &= ~(1<<irq);
+
+ irq += (IRQ_EINT4 - 4);
+
+ desc_handle_irq(irq, irq_desc + irq, regs);
+ }
+}
+
+#ifdef CONFIG_PM
+
+static struct sleep_save irq_save[] = {
+ SAVE_ITEM(S3C2410_INTMSK),
+ SAVE_ITEM(S3C2410_INTSUBMSK),
+};
+
+/* the extint values move between the s3c2410/s3c2440 and the s3c2412
+ * so we use an array to hold them, and to calculate the address of
+ * the register at run-time
+*/
+
+static unsigned long save_extint[3];
+static unsigned long save_eintflt[4];
+static unsigned long save_eintmask;
+
+int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+ save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
+
+ for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+ save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
+
+ s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+ save_eintmask = __raw_readl(S3C24XX_EINTMASK);
+
+ return 0;
}
+int s3c24xx_irq_resume(struct sys_device *dev)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+ __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
+
+ for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+ __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
+
+ s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+ __raw_writel(save_eintmask, S3C24XX_EINTMASK);
+
+ return 0;
+}
+
+#else
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume NULL
+#endif
+
/* s3c24xx_init_irq
*
* Initialise S3C2410 IRQ system
@@ -674,8 +763,8 @@ void __init s3c24xx_init_irq(void)
/* setup the cascade irq handlers */
- set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint);
- set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint);
+ set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
+ set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
new file mode 100644
index 00000000000..ba5109af40b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -0,0 +1,266 @@
+/***********************************************************************
+ *
+ * linux/arch/arm/mach-s3c2410/mach-amlm5900.c
+ *
+ * Copyright (c) 2006 American Microsystems Limited
+ * David Anders <danders@amltd.com>
+
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * @History:
+ * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ ***********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/proc_fs.h>
+
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/arch/fb.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-gpio.h>
+
+#include "devs.h"
+#include "cpu.h"
+
+#ifdef CONFIG_MTD_PARTITIONS
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+
+static struct resource amlm5900_nor_resource = {
+ .start = 0x00000000,
+ .end = 0x01000000 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+
+
+static struct mtd_partition amlm5900_mtd_partitions[] = {
+ {
+ .name = "System",
+ .size = 0x240000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ .name = "Kernel",
+ .size = 0x100000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "Ramdisk",
+ .size = 0x300000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "JFFS2",
+ .size = 0x9A0000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "Settings",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct physmap_flash_data amlm5900_flash_data = {
+ .width = 2,
+ .parts = amlm5900_mtd_partitions,
+ .nr_parts = ARRAY_SIZE(amlm5900_mtd_partitions),
+};
+
+static struct platform_device amlm5900_device_nor = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &amlm5900_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &amlm5900_nor_resource,
+};
+#endif
+
+static struct map_desc amlm5900_iodesc[] __initdata = {
+ {
+ .virtual = (u32)S3C24XX_VA_SPI,
+ .pfn = __phys_to_pfn(S3C2410_PA_SPI),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg amlm5900_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+
+static struct platform_device *amlm5900_devices[] __initdata = {
+#ifdef CONFIG_FB_S3C2410
+ &s3c_device_lcd,
+#endif
+ &s3c_device_adc,
+ &s3c_device_wdt,
+ &s3c_device_i2c,
+ &s3c_device_usb,
+ &s3c_device_rtc,
+ &s3c_device_usbgadget,
+ &s3c_device_sdi,
+#ifdef CONFIG_MTD_PARTITIONS
+ &amlm5900_device_nor,
+#endif
+};
+
+static struct s3c24xx_board amlm5900_board __initdata = {
+ .devices = amlm5900_devices,
+ .devices_count = ARRAY_SIZE(amlm5900_devices)
+};
+
+void __init amlm5900_map_io(void)
+{
+ s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
+ s3c24xx_set_board(&amlm5900_board);
+}
+
+#ifdef CONFIG_FB_S3C2410
+static struct s3c2410fb_mach_info __initdata amlm5900_lcd_info = {
+ .width = 160,
+ .height = 160,
+
+/* commented out until stn patch is submitted
+* .type = S3C2410_LCDCON1_STN4,
+*/
+ .gpccon = 0xaaaaaaaa,
+ .gpccon_mask = 0xffffffff,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+
+ .gpdcon = 0xaaaaaaaa,
+ .gpdcon_mask = 0xffffffff,
+ .gpdup = 0x0000ffff,
+ .gpdup_mask = 0xffffffff,
+
+ .xres = {
+ .min = 160,
+ .max = 160,
+ .defval = 160,
+ },
+
+ .yres = {
+ .min = 160,
+ .max = 160,
+ .defval = 160,
+ },
+
+ .bpp = {
+ .min = 4,
+ .max = 4,
+ .defval = 4,
+ },
+
+ .regs = {
+ .lcdcon1 = 0x00008225,
+ .lcdcon2 = 0x0027c000,
+ .lcdcon3 = 0x00182708,
+ .lcdcon4 = 0x00000002,
+ .lcdcon5 = 0x00000001,
+ }
+};
+#endif
+
+static irqreturn_t
+amlm5900_wake_interrupt(int irq, void *ignored, struct pt_regs *regs)
+{
+ return IRQ_HANDLED;
+}
+
+static void amlm5900_init_pm(void)
+{
+ int ret = 0;
+
+ ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt,
+ IRQF_TRIGGER_RISING | IRQF_SHARED,
+ "amlm5900_wakeup", &amlm5900_wake_interrupt);
+ if (ret != 0) {
+ printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret);
+ } else {
+ enable_irq_wake(IRQ_EINT9);
+ /* configure the suspend/resume status pin */
+ s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP);
+ s3c2410_gpio_pullup(S3C2410_GPF2, 0);
+ }
+}
+static void __init amlm5900_init(void)
+{
+ amlm5900_init_pm();
+#ifdef CONFIG_FB_S3C2410
+ s3c24xx_fb_set_platdata(&amlm5900_lcd_info);
+#endif
+}
+
+MACHINE_START(AML_M5900, "AML_M5900")
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = amlm5900_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = amlm5900_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c
index 60641d452db..e94cdcd9659 100644
--- a/arch/arm/mach-s3c2410/mach-anubis.c
+++ b/arch/arm/mach-s3c2410/mach-anubis.c
@@ -4,15 +4,9 @@
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
- *
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Modifications:
- * 02-May-2005 BJD Copied from mach-bast.c
- * 20-Sep-2005 BJD Added static to non-exported items
*/
#include <linux/kernel.h>
diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c
index d661c6b7ff5..e2205ff1b0e 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2440.c
@@ -11,15 +11,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * Modifications:
- * 01-Nov-2004 BJD Initial version
- * 12-Nov-2004 BJD Updated for release
- * 04-Jan-2005 BJD Fixes for pre-release
- * 22-Feb-2005 BJD Updated for 2.6.11-rc5 relesa
- * 10-Mar-2005 LCVR Replaced S3C2410_VA by S3C24XX_VA
- * 14-Mar-2005 BJD void __iomem fixes
- * 20-Sep-2005 BJD Added static to non-exported items
- * 26-Oct-2005 BJD Added framebuffer data
*/
#include <linux/kernel.h>
diff --git a/arch/arm/mach-s3c2410/mach-vstms.c b/arch/arm/mach-s3c2410/mach-vstms.c
new file mode 100644
index 00000000000..ea554e7c006
--- /dev/null
+++ b/arch/arm/mach-s3c2410/mach-vstms.c
@@ -0,0 +1,168 @@
+/* linux/arch/arm/mach-s3c2410/mach-vstms.c
+ *
+ * (C) 2006 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/hardware/iomd.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/idle.h>
+#include <asm/arch/fb.h>
+
+#include <asm/arch/nand.h>
+
+#include "s3c2410.h"
+#include "s3c2412.h"
+#include "clock.h"
+#include "devs.h"
+#include "cpu.h"
+
+
+static struct map_desc vstms_iodesc[] __initdata = {
+};
+
+static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ }
+};
+
+static struct mtd_partition vstms_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = 0x7C000,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "UBoot Config",
+ .offset = 0x7C000,
+ .size = 0x4000,
+ },
+ [2] = {
+ .name = "Kernel",
+ .offset = 0x80000,
+ .size = 0x200000,
+ },
+ [3] = {
+ .name = "RFS",
+ .offset = 0x280000,
+ .size = 0x3d80000,
+ },
+};
+
+static struct s3c2410_nand_set vstms_nand_sets[] = {
+ [0] = {
+ .name = "NAND",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(vstms_nand_part),
+ .partitions = vstms_nand_part,
+ },
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+*/
+
+static struct s3c2410_platform_nand vstms_nand_info = {
+ .tacls = 20,
+ .twrph0 = 60,
+ .twrph1 = 20,
+ .nr_sets = ARRAY_SIZE(vstms_nand_sets),
+ .sets = vstms_nand_sets,
+};
+
+static struct platform_device *vstms_devices[] __initdata = {
+ &s3c_device_usb,
+ &s3c_device_wdt,
+ &s3c_device_i2c,
+ &s3c_device_iis,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+};
+
+static struct s3c24xx_board vstms_board __initdata = {
+ .devices = vstms_devices,
+ .devices_count = ARRAY_SIZE(vstms_devices)
+};
+
+static void __init vstms_fixup(struct machine_desc *desc,
+ struct tag *tags, char **cmdline,
+ struct meminfo *mi)
+{
+ if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
+ mi->nr_banks=1;
+ mi->bank[0].start = 0x30000000;
+ mi->bank[0].size = SZ_64M;
+ mi->bank[0].node = 0;
+ }
+}
+
+static void __init vstms_map_io(void)
+{
+ s3c_device_nand.dev.platform_data = &vstms_nand_info;
+
+ s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
+ s3c24xx_set_board(&vstms_board);
+}
+
+MACHINE_START(VSTMS, "VSTMS")
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+
+ .fixup = vstms_fixup,
+ .init_irq = s3c24xx_init_irq,
+ .map_io = vstms_map_io,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c
index 7b244566a43..42cd05e298f 100644
--- a/arch/arm/mach-s3c2410/pm-simtec.c
+++ b/arch/arm/mach-s3c2410/pm-simtec.c
@@ -49,7 +49,8 @@ static __init int pm_simtec_init(void)
/* check which machine we are running on */
if (!machine_is_bast() && !machine_is_vr1000() &&
- !machine_is_anubis() && !machine_is_osiris())
+ !machine_is_anubis() && !machine_is_osiris() &&
+ !machine_is_aml_m5900())
return 0;
printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n");
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index a589fe76d91..b49a0b3b72b 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -1,9 +1,9 @@
/* linux/arch/arm/mach-s3c2410/pm.c
*
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright (c) 2004,2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 Power Manager (Suspend-To-RAM) support
+ * S3C24XX Power Manager (Suspend-To-RAM) support
*
* See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
*
@@ -24,9 +24,6 @@
* Parts based on arch/arm/mach-pxa/pm.c
*
* Thanks to Dimitry Andric for debugging
- *
- * Modifications:
- * 10-Mar-2005 LCVR Changed S3C2410_VA_UART to S3C24XX_VA_UART
*/
#include <linux/init.h>
@@ -38,6 +35,7 @@
#include <linux/ioport.h>
#include <linux/delay.h>
+#include <asm/cacheflush.h>
#include <asm/hardware.h>
#include <asm/io.h>
@@ -55,14 +53,6 @@
unsigned long s3c_pm_flags;
-/* cache functions from arch/arm/mm/proc-arm920.S */
-
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-extern void arm920_flush_kern_cache_all(void);
-#else
-static void arm920_flush_kern_cache_all(void) { }
-#endif
-
#define PFX "s3c24xx-pm: "
static struct sleep_save core_save[] = {
@@ -92,19 +82,6 @@ static struct sleep_save core_save[] = {
SAVE_ITEM(S3C2410_REFRESH),
};
-/* this lot should be really saved by the IRQ code */
-static struct sleep_save irq_save[] = {
- SAVE_ITEM(S3C2410_EXTINT0),
- SAVE_ITEM(S3C2410_EXTINT1),
- SAVE_ITEM(S3C2410_EXTINT2),
- SAVE_ITEM(S3C2410_EINFLT0),
- SAVE_ITEM(S3C2410_EINFLT1),
- SAVE_ITEM(S3C2410_EINFLT2),
- SAVE_ITEM(S3C2410_EINFLT3),
- SAVE_ITEM(S3C2410_EINTMASK),
- SAVE_ITEM(S3C2410_INTMSK)
-};
-
static struct sleep_save gpio_save[] = {
SAVE_ITEM(S3C2410_GPACON),
SAVE_ITEM(S3C2410_GPADAT),
@@ -165,7 +142,7 @@ static struct sleep_save uart_save[] = {
extern void printascii(const char *);
-static void pm_dbg(const char *fmt, ...)
+void pm_dbg(const char *fmt, ...)
{
va_list va;
char buff[256];
@@ -509,6 +486,9 @@ static void s3c2410_pm_configure_extint(void)
}
}
+void (*pm_cpu_prep)(void);
+void (*pm_cpu_sleep)(void);
+
#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
/* s3c2410_pm_enter
@@ -519,7 +499,6 @@ static void s3c2410_pm_configure_extint(void)
static int s3c2410_pm_enter(suspend_state_t state)
{
unsigned long regs_save[16];
- unsigned long tmp;
/* ensure the debug is initialised (if enabled) */
@@ -527,6 +506,11 @@ static int s3c2410_pm_enter(suspend_state_t state)
DBG("s3c2410_pm_enter(%d)\n", state);
+ if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+ printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
+ return -EINVAL;
+ }
+
if (state != PM_SUSPEND_MEM) {
printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n");
return -EINVAL;
@@ -554,17 +538,9 @@ static int s3c2410_pm_enter(suspend_state_t state)
DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
- /* ensure at least GESTATUS3 has the resume address */
-
- __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
-
- DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
- DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
-
/* save all necessary core registers not covered by the drivers */
s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
- s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
@@ -581,10 +557,16 @@ static int s3c2410_pm_enter(suspend_state_t state)
/* ack any outstanding external interrupts before we go to sleep */
__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
+ __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
+ __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
+
+ /* call cpu specific preperation */
+
+ pm_cpu_prep();
/* flush cache back to ram */
- arm920_flush_kern_cache_all();
+ flush_cache_all();
s3c2410_pm_check_store();
@@ -592,23 +574,23 @@ static int s3c2410_pm_enter(suspend_state_t state)
__raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
- s3c2410_cpu_suspend(regs_save);
+ /* s3c2410_cpu_save will also act as our return point from when
+ * we resume as it saves its own register state, so use the return
+ * code to differentiate return from save and return from sleep */
+
+ if (s3c2410_cpu_save(regs_save) == 0) {
+ flush_cache_all();
+ pm_cpu_sleep();
+ }
/* restore the cpu state */
cpu_init();
- /* unset the return-from-sleep flag, to ensure reset */
-
- tmp = __raw_readl(S3C2410_GSTATUS2);
- tmp &= S3C2410_GSTATUS2_OFFRESET;
- __raw_writel(tmp, S3C2410_GSTATUS2);
-
/* restore the system state */
s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
- s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
s3c2410_pm_debug_init();
diff --git a/arch/arm/mach-s3c2410/pm.h b/arch/arm/mach-s3c2410/pm.h
index 7a5e714c738..ffe197a119f 100644
--- a/arch/arm/mach-s3c2410/pm.h
+++ b/arch/arm/mach-s3c2410/pm.h
@@ -34,13 +34,19 @@ extern unsigned long s3c_irqwake_eintmask;
extern unsigned long s3c_irqwake_intallow;
extern unsigned long s3c_irqwake_eintallow;
+/* per-cpu sleep functions */
+
+extern void (*pm_cpu_prep)(void);
+extern void (*pm_cpu_sleep)(void);
+
/* Flags for PM Control */
extern unsigned long s3c_pm_flags;
/* from sleep.S */
-extern void s3c2410_cpu_suspend(unsigned long *saveblk);
+extern int s3c2410_cpu_save(unsigned long *saveblk);
+extern void s3c2410_cpu_suspend(void);
extern void s3c2410_cpu_resume(void);
extern unsigned long s3c2410_sleep_save_phys;
@@ -57,3 +63,11 @@ struct sleep_save {
extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
+
+#ifdef CONFIG_PM
+extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
+extern int s3c24xx_irq_resume(struct sys_device *dev);
+#else
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume NULL
+#endif
diff --git a/arch/arm/mach-s3c2410/s3c2410-dma.c b/arch/arm/mach-s3c2410/s3c2410-dma.c
new file mode 100644
index 00000000000..51e5098b32e
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2410-dma.c
@@ -0,0 +1,158 @@
+/* linux/arch/arm/mach-s3c2410/s3c2410-dma.c
+ *
+ * (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 DMA selection
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <asm/dma.h>
+#include <asm/arch/dma.h>
+#include "dma.h"
+
+#include "cpu.h"
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
+ [DMACH_XD0] = {
+ .name = "xdreq0",
+ .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
+ },
+ [DMACH_XD1] = {
+ .name = "xdreq1",
+ .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
+ },
+ [DMACH_SDI] = {
+ .name = "sdi",
+ .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
+ .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_SPI0] = {
+ .name = "spi0",
+ .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
+ },
+ [DMACH_SPI1] = {
+ .name = "spi1",
+ .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+ },
+ [DMACH_UART0] = {
+ .name = "uart0",
+ .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
+ },
+ [DMACH_UART1] = {
+ .name = "uart1",
+ .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
+ },
+ [DMACH_UART2] = {
+ .name = "uart2",
+ .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
+ },
+ [DMACH_TIMER] = {
+ .name = "timer",
+ .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
+ .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
+ },
+ [DMACH_I2S_IN] = {
+ .name = "i2s-sdi",
+ .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
+ .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_I2S_OUT] = {
+ .name = "i2s-sdo",
+ .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_USB_EP1] = {
+ .name = "usb-ep1",
+ .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP2] = {
+ .name = "usb-ep2",
+ .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP3] = {
+ .name = "usb-ep3",
+ .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP4] = {
+ .name = "usb-ep4",
+ .channels[3] =S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
+ },
+};
+
+static void s3c2410_dma_select(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map)
+{
+ chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
+}
+
+static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = {
+ .select = s3c2410_dma_select,
+ .dcon_mask = 7 << 24,
+ .map = s3c2410_dma_mappings,
+ .map_size = ARRAY_SIZE(s3c2410_dma_mappings),
+};
+
+static int s3c2410_dma_add(struct sys_device *sysdev)
+{
+ return s3c24xx_dma_init_map(&s3c2410_dma_sel);
+}
+
+static struct sysdev_driver s3c2410_dma_driver = {
+ .add = s3c2410_dma_add,
+};
+
+static int __init s3c2410_dma_init(void)
+{
+ return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver);
+}
+
+arch_initcall(s3c2410_dma_init);
+
+/* S3C2442 DMA contains the same selection table as the S3C2410 */
+
+static struct sysdev_driver s3c2442_dma_driver = {
+ .add = s3c2410_dma_add,
+};
+
+static int __init s3c2442_dma_init(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver);
+}
+
+arch_initcall(s3c2442_dma_init);
+
+
diff --git a/arch/arm/mach-s3c2410/s3c2410-irq.c b/arch/arm/mach-s3c2410/s3c2410-irq.c
new file mode 100644
index 00000000000..c796c9c76e7
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2410-irq.c
@@ -0,0 +1,48 @@
+/* linux/arch/arm/mach-s3c2410/s3c2410-irq.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include "cpu.h"
+#include "pm.h"
+
+static int s3c2410_irq_add(struct sys_device *sysdev)
+{
+ return 0;
+}
+
+static struct sysdev_driver s3c2410_irq_driver = {
+ .add = s3c2410_irq_add,
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
+};
+
+static int s3c2410_irq_init(void)
+{
+ return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
+}
+
+arch_initcall(s3c2410_irq_init);
diff --git a/arch/arm/mach-s3c2410/s3c2410-pm.c b/arch/arm/mach-s3c2410/s3c2410-pm.c
new file mode 100644
index 00000000000..e51d7666951
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2410-pm.c
@@ -0,0 +1,120 @@
+/* linux/arch/arm/mach-s3c2410/s3c2410-pm.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-gpio.h>
+
+#include "cpu.h"
+#include "pm.h"
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+extern void pm_dbg(const char *fmt, ...);
+#define DBG(fmt...) pm_dbg(fmt)
+#else
+#define DBG(fmt...) printk(KERN_DEBUG fmt)
+#endif
+
+static void s3c2410_pm_prepare(void)
+{
+ /* ensure at least GSTATUS3 has the resume address */
+
+ __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
+
+ DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+ DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
+
+ if ( machine_is_aml_m5900() )
+ s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+
+}
+
+int s3c2410_pm_resume(struct sys_device *dev)
+{
+ unsigned long tmp;
+
+ /* unset the return-from-sleep flag, to ensure reset */
+
+ tmp = __raw_readl(S3C2410_GSTATUS2);
+ tmp &= S3C2410_GSTATUS2_OFFRESET;
+ __raw_writel(tmp, S3C2410_GSTATUS2);
+
+ if ( machine_is_aml_m5900() )
+ s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+
+ return 0;
+}
+
+static int s3c2410_pm_add(struct sys_device *dev)
+{
+ pm_cpu_prep = s3c2410_pm_prepare;
+ pm_cpu_sleep = s3c2410_cpu_suspend;
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2410_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
+};
+
+/* register ourselves */
+
+static int __init s3c2410_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver);
+}
+
+arch_initcall(s3c2410_pm_drvinit);
+
+static struct sysdev_driver s3c2440_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
+};
+
+static int __init s3c2440_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver);
+}
+
+arch_initcall(s3c2440_pm_drvinit);
+
+static struct sysdev_driver s3c2442_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
+};
+
+static int __init s3c2442_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver);
+}
+
+arch_initcall(s3c2442_pm_drvinit);
diff --git a/arch/arm/mach-s3c2410/s3c2410-sleep.S b/arch/arm/mach-s3c2410/s3c2410-sleep.S
new file mode 100644
index 00000000000..9179a102458
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2410-sleep.S
@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 Power Manager (Suspend-To-RAM) support
+ *
+ * Based on PXA/SA1100 sleep code by:
+ * Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ * Cliff Brake, (c) 2001
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+#include <asm/arch/map.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-serial.h>
+
+ /* s3c2410_cpu_suspend
+ *
+ * put the cpu into sleep mode
+ */
+
+ENTRY(s3c2410_cpu_suspend)
+ @@ prepare cpu to sleep
+
+ ldr r4, =S3C2410_REFRESH
+ ldr r5, =S3C24XX_MISCCR
+ ldr r6, =S3C2410_CLKCON
+ ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB)
+ ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB)
+ ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB)
+
+ orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command
+ orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
+ orr r9, r9, #S3C2410_CLKCON_POWER @ power down command
+
+ teq pc, #0 @ first as a trial-run to load cache
+ bl s3c2410_do_sleep
+ teq r0, r0 @ now do it for real
+ b s3c2410_do_sleep @
+
+ @@ align next bit of code to cache line
+ .align 8
+s3c2410_do_sleep:
+ streq r7, [ r4 ] @ SDRAM sleep command
+ streq r8, [ r5 ] @ SDRAM power-down config
+ streq r9, [ r6 ] @ CPU sleep
+1: beq 1b
+ mov pc, r14
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index a110cff9cf6..183e4033ce6 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -8,17 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Modifications:
- * 16-May-2003 BJD Created initial version
- * 16-Aug-2003 BJD Fixed header files and copyright, added URL
- * 05-Sep-2003 BJD Moved to kernel v2.6
- * 18-Jan-2004 BJD Added serial port configuration
- * 21-Aug-2004 BJD Added new struct s3c2410_board handler
- * 28-Sep-2004 BJD Updates for new serial port bits
- * 04-Nov-2004 BJD Updated UART configuration process
- * 10-Jan-2005 BJD Removed s3c2410_clock_tick_rate
- * 13-Aug-2005 DA Removed UART from initial I/O mappings
*/
#include <linux/kernel.h>
diff --git a/arch/arm/mach-s3c2410/s3c2412-dma.c b/arch/arm/mach-s3c2410/s3c2412-dma.c
new file mode 100644
index 00000000000..171f3706d36
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2412-dma.c
@@ -0,0 +1,160 @@
+/* linux/arch/arm/mach-s3c2410/s3c2412-dma.c
+ *
+ * (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 DMA selection
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <asm/dma.h>
+#include <asm/arch/dma.h>
+#include <asm/io.h>
+
+#include "dma.h"
+#include "cpu.h"
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+#define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }
+
+static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
+ [DMACH_XD0] = {
+ .name = "xdreq0",
+ .channels = MAP(S3C2412_DMAREQSEL_XDREQ0),
+ },
+ [DMACH_XD1] = {
+ .name = "xdreq1",
+ .channels = MAP(S3C2412_DMAREQSEL_XDREQ1),
+ },
+ [DMACH_SDI] = {
+ .name = "sdi",
+ .channels = MAP(S3C2412_DMAREQSEL_SDI),
+ .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_SPI0] = {
+ .name = "spi0",
+ .channels = MAP(S3C2412_DMAREQSEL_SPI0TX),
+ .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
+ },
+ [DMACH_SPI1] = {
+ .name = "spi1",
+ .channels = MAP(S3C2412_DMAREQSEL_SPI1TX),
+ .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+ },
+ [DMACH_UART0] = {
+ .name = "uart0",
+ .channels = MAP(S3C2412_DMAREQSEL_UART0_0),
+ .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
+ },
+ [DMACH_UART1] = {
+ .name = "uart1",
+ .channels = MAP(S3C2412_DMAREQSEL_UART1_0),
+ .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
+ },
+ [DMACH_UART2] = {
+ .name = "uart2",
+ .channels = MAP(S3C2412_DMAREQSEL_UART2_0),
+ .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
+ },
+ [DMACH_UART0_SRC2] = {
+ .name = "uart0",
+ .channels = MAP(S3C2412_DMAREQSEL_UART0_1),
+ .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
+ },
+ [DMACH_UART1_SRC2] = {
+ .name = "uart1",
+ .channels = MAP(S3C2412_DMAREQSEL_UART1_1),
+ .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
+ },
+ [DMACH_UART2_SRC2] = {
+ .name = "uart2",
+ .channels = MAP(S3C2412_DMAREQSEL_UART2_1),
+ .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
+ },
+ [DMACH_TIMER] = {
+ .name = "timer",
+ .channels = MAP(S3C2412_DMAREQSEL_TIMER),
+ },
+ [DMACH_I2S_IN] = {
+ .name = "i2s-sdi",
+ .channels = MAP(S3C2412_DMAREQSEL_I2SRX),
+ .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_I2S_OUT] = {
+ .name = "i2s-sdo",
+ .channels = MAP(S3C2412_DMAREQSEL_I2STX),
+ .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_USB_EP1] = {
+ .name = "usb-ep1",
+ .channels = MAP(S3C2412_DMAREQSEL_USBEP1),
+ },
+ [DMACH_USB_EP2] = {
+ .name = "usb-ep2",
+ .channels = MAP(S3C2412_DMAREQSEL_USBEP2),
+ },
+ [DMACH_USB_EP3] = {
+ .name = "usb-ep3",
+ .channels = MAP(S3C2412_DMAREQSEL_USBEP3),
+ },
+ [DMACH_USB_EP4] = {
+ .name = "usb-ep4",
+ .channels = MAP(S3C2412_DMAREQSEL_USBEP4),
+ },
+};
+
+static void s3c2412_dma_select(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map)
+{
+ writel(chan->regs + S3C2412_DMA_DMAREQSEL,
+ map->channels[0] | S3C2412_DMAREQSEL_HW);
+}
+
+static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
+ .select = s3c2412_dma_select,
+ .dcon_mask = 0,
+ .map = s3c2412_dma_mappings,
+ .map_size = ARRAY_SIZE(s3c2412_dma_mappings),
+};
+
+static int s3c2412_dma_add(struct sys_device *sysdev)
+{
+ return s3c24xx_dma_init_map(&s3c2412_dma_sel);
+}
+
+static struct sysdev_driver s3c2412_dma_driver = {
+ .add = s3c2412_dma_add,
+};
+
+static int __init s3c2412_dma_init(void)
+{
+ return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_dma_driver);
+}
+
+arch_initcall(s3c2412_dma_init);
diff --git a/arch/arm/mach-s3c2410/s3c2412-irq.c b/arch/arm/mach-s3c2410/s3c2412-irq.c
index c80ec93dfea..7f741547658 100644
--- a/arch/arm/mach-s3c2410/s3c2412-irq.c
+++ b/arch/arm/mach-s3c2410/s3c2412-irq.c
@@ -37,6 +37,7 @@
#include "cpu.h"
#include "irq.h"
+#include "pm.h"
/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
* having them turn up in both the INT* and the EINT* registers. Whilst
@@ -120,6 +121,8 @@ static int s3c2412_irq_add(struct sys_device *sysdev)
static struct sysdev_driver s3c2412_irq_driver = {
.add = s3c2412_irq_add,
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
};
static int s3c2412_irq_init(void)
diff --git a/arch/arm/mach-s3c2410/s3c2412-pm.c b/arch/arm/mach-s3c2410/s3c2412-pm.c
new file mode 100644
index 00000000000..19b63322d25
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2412-pm.c
@@ -0,0 +1,128 @@
+/* linux/arch/arm/mach-s3c2410/s3c2412-pm.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-power.h>
+#include <asm/arch/regs-gpioj.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-dsc.h>
+
+#include "cpu.h"
+#include "pm.h"
+
+#include "s3c2412.h"
+
+static void s3c2412_cpu_suspend(void)
+{
+ unsigned long tmp;
+
+ /* set our standby method to sleep */
+
+ tmp = __raw_readl(S3C2412_PWRCFG);
+ tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP;
+ __raw_writel(tmp, S3C2412_PWRCFG);
+
+ /* issue the standby signal into the pm unit. Note, we
+ * issue a write-buffer drain just in case */
+
+ tmp = 0;
+
+ asm("b 1f\n\t"
+ ".align 5\n\t"
+ "1:\n\t"
+ "mcr p15, 0, %0, c7, c10, 4\n\t"
+ "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
+
+ /* we should never get past here */
+
+ panic("sleep resumed to originator?");
+}
+
+static void s3c2412_pm_prepare(void)
+{
+}
+
+static int s3c2412_pm_add(struct sys_device *sysdev)
+{
+ pm_cpu_prep = s3c2412_pm_prepare;
+ pm_cpu_sleep = s3c2412_cpu_suspend;
+
+ return 0;
+}
+
+static struct sleep_save s3c2412_sleep[] = {
+ SAVE_ITEM(S3C2412_DSC0),
+ SAVE_ITEM(S3C2412_DSC1),
+ SAVE_ITEM(S3C2413_GPJDAT),
+ SAVE_ITEM(S3C2413_GPJCON),
+ SAVE_ITEM(S3C2413_GPJUP),
+
+ /* save the PWRCFG to get back to original sleep method */
+
+ SAVE_ITEM(S3C2412_PWRCFG),
+
+ /* save the sleep configuration anyway, just in case these
+ * get damaged during wakeup */
+
+ SAVE_ITEM(S3C2412_GPBSLPCON),
+ SAVE_ITEM(S3C2412_GPCSLPCON),
+ SAVE_ITEM(S3C2412_GPDSLPCON),
+ SAVE_ITEM(S3C2412_GPESLPCON),
+ SAVE_ITEM(S3C2412_GPFSLPCON),
+ SAVE_ITEM(S3C2412_GPGSLPCON),
+ SAVE_ITEM(S3C2412_GPHSLPCON),
+ SAVE_ITEM(S3C2413_GPJSLPCON),
+};
+
+static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+ s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+ return 0;
+}
+
+static int s3c2412_pm_resume(struct sys_device *dev)
+{
+ unsigned long tmp;
+
+ tmp = __raw_readl(S3C2412_PWRCFG);
+ tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
+ tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
+ __raw_writel(tmp, S3C2412_PWRCFG);
+
+ s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
+ return 0;
+}
+
+static struct sysdev_driver s3c2412_pm_driver = {
+ .add = s3c2412_pm_add,
+ .suspend = s3c2412_pm_suspend,
+ .resume = s3c2412_pm_resume,
+};
+
+static __init int s3c2412_pm_init(void)
+{
+ return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_pm_driver);
+}
+
+arch_initcall(s3c2412_pm_init);
diff --git a/arch/arm/mach-s3c2410/s3c2412.c b/arch/arm/mach-s3c2410/s3c2412.c
index 2d163f7600b..e76431c4146 100644
--- a/arch/arm/mach-s3c2410/s3c2412.c
+++ b/arch/arm/mach-s3c2410/s3c2412.c
@@ -8,17 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Modifications:
- * 16-May-2003 BJD Created initial version
- * 16-Aug-2003 BJD Fixed header files and copyright, added URL
- * 05-Sep-2003 BJD Moved to kernel v2.6
- * 18-Jan-2004 BJD Added serial port configuration
- * 21-Aug-2004 BJD Added new struct s3c2410_board handler
- * 28-Sep-2004 BJD Updates for new serial port bits
- * 04-Nov-2004 BJD Updated UART configuration process
- * 10-Jan-2005 BJD Removed s3c2410_clock_tick_rate
- * 13-Aug-2005 DA Removed UART from initial I/O mappings
*/
#include <linux/kernel.h>
@@ -56,6 +45,13 @@
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
+
+static inline void s3c2412_init_gpio2(void)
+{
+ s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
+}
+#else
+#define s3c2412_init_gpio2() do { } while(0)
#endif
/* Initial IO mappings */
@@ -76,6 +72,7 @@ void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
/* rename devices that are s3c2412/s3c2413 specific */
s3c_device_sdi.name = "s3c2412-sdi";
+ s3c_device_lcd.name = "s3c2412-lcd";
s3c_device_nand.name = "s3c2412-nand";
}
@@ -110,7 +107,7 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
{
/* move base of IO */
- s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
+ s3c2412_init_gpio2();
/* set our idle function */
@@ -161,48 +158,8 @@ void __init s3c2412_init_clocks(int xtal)
* as a driver which may support both 2410 and 2440 may try and use it.
*/
-#ifdef CONFIG_PM
-static struct sleep_save s3c2412_sleep[] = {
- SAVE_ITEM(S3C2412_DSC0),
- SAVE_ITEM(S3C2412_DSC1),
- SAVE_ITEM(S3C2413_GPJDAT),
- SAVE_ITEM(S3C2413_GPJCON),
- SAVE_ITEM(S3C2413_GPJUP),
-
- /* save the sleep configuration anyway, just in case these
- * get damaged during wakeup */
-
- SAVE_ITEM(S3C2412_GPBSLPCON),
- SAVE_ITEM(S3C2412_GPCSLPCON),
- SAVE_ITEM(S3C2412_GPDSLPCON),
- SAVE_ITEM(S3C2412_GPESLPCON),
- SAVE_ITEM(S3C2412_GPFSLPCON),
- SAVE_ITEM(S3C2412_GPGSLPCON),
- SAVE_ITEM(S3C2412_GPHSLPCON),
- SAVE_ITEM(S3C2413_GPJSLPCON),
-};
-
-static int s3c2412_suspend(struct sys_device *dev, pm_message_t state)
-{
- s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
- return 0;
-}
-
-static int s3c2412_resume(struct sys_device *dev)
-{
- s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
- return 0;
-}
-
-#else
-#define s3c2412_suspend NULL
-#define s3c2412_resume NULL
-#endif
-
struct sysdev_class s3c2412_sysclass = {
set_kset_name("s3c2412-core"),
- .suspend = s3c2412_suspend,
- .resume = s3c2412_resume
};
static int __init s3c2412_core_init(void)
diff --git a/arch/arm/mach-s3c2410/s3c2440-dma.c b/arch/arm/mach-s3c2410/s3c2440-dma.c
new file mode 100644
index 00000000000..11e109c84a1
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2440-dma.c
@@ -0,0 +1,164 @@
+/* linux/arch/arm/mach-s3c2410/s3c2440-dma.c
+ *
+ * (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2440 DMA selection
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <asm/dma.h>
+#include <asm/arch/dma.h>
+#include "dma.h"
+
+#include "cpu.h"
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
+ [DMACH_XD0] = {
+ .name = "xdreq0",
+ .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
+ },
+ [DMACH_XD1] = {
+ .name = "xdreq1",
+ .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
+ },
+ [DMACH_SDI] = {
+ .name = "sdi",
+ .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
+ .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
+ .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_SPI0] = {
+ .name = "spi0",
+ .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
+ },
+ [DMACH_SPI1] = {
+ .name = "spi1",
+ .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+ },
+ [DMACH_UART0] = {
+ .name = "uart0",
+ .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
+ },
+ [DMACH_UART1] = {
+ .name = "uart1",
+ .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
+ },
+ [DMACH_UART2] = {
+ .name = "uart2",
+ .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
+ },
+ [DMACH_TIMER] = {
+ .name = "timer",
+ .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
+ .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
+ },
+ [DMACH_I2S_IN] = {
+ .name = "i2s-sdi",
+ .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
+ .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_I2S_OUT] = {
+ .name = "i2s-sdo",
+ .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_PCM_IN] = {
+ .name = "pcm-in",
+ .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
+ .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
+ .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
+ },
+ [DMACH_PCM_OUT] = {
+ .name = "pcm-out",
+ .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
+ .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
+ .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
+ },
+ [DMACH_MIC_IN] = {
+ .name = "mic-in",
+ .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
+ .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
+ .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
+ },
+ [DMACH_USB_EP1] = {
+ .name = "usb-ep1",
+ .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP2] = {
+ .name = "usb-ep2",
+ .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP3] = {
+ .name = "usb-ep3",
+ .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP4] = {
+ .name = "usb-ep4",
+ .channels[3] = S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
+ },
+};
+
+static void s3c2440_dma_select(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map)
+{
+ chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
+}
+
+static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = {
+ .select = s3c2440_dma_select,
+ .dcon_mask = 7 << 24,
+ .map = s3c2440_dma_mappings,
+ .map_size = ARRAY_SIZE(s3c2440_dma_mappings),
+};
+
+static int s3c2440_dma_add(struct sys_device *sysdev)
+{
+ return s3c24xx_dma_init_map(&s3c2440_dma_sel);
+}
+
+static struct sysdev_driver s3c2440_dma_driver = {
+ .add = s3c2440_dma_add,
+};
+
+static int __init s3c2440_dma_init(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_dma_driver);
+}
+
+arch_initcall(s3c2440_dma_init);
+
diff --git a/arch/arm/mach-s3c2410/s3c2440-dsc.c b/arch/arm/mach-s3c2410/s3c2440-dsc.c
index 16fa2a3b38f..c92ea66ba45 100644
--- a/arch/arm/mach-s3c2410/s3c2440-dsc.c
+++ b/arch/arm/mach-s3c2410/s3c2440-dsc.c
@@ -8,11 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Modifications:
- * 29-Aug-2004 BJD Start of drive-strength control
- * 09-Nov-2004 BJD Added symbol export
- * 11-Jan-2005 BJD Include fix
*/
#include <linux/kernel.h>
diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2410/s3c2440-irq.c
index 1667ba1fa43..fc08febe2e5 100644
--- a/arch/arm/mach-s3c2410/s3c2440-irq.c
+++ b/arch/arm/mach-s3c2410/s3c2440-irq.c
@@ -119,7 +119,7 @@ static int s3c2440_irq_add(struct sys_device *sysdev)
}
static struct sysdev_driver s3c2440_irq_driver = {
- .add = s3c2440_irq_add,
+ .add = s3c2440_irq_add,
};
static int s3c2440_irq_init(void)
diff --git a/arch/arm/mach-s3c2410/s3c244x-irq.c b/arch/arm/mach-s3c2410/s3c244x-irq.c
index 44c5affa9b8..0d13546c350 100644
--- a/arch/arm/mach-s3c2410/s3c244x-irq.c
+++ b/arch/arm/mach-s3c2410/s3c244x-irq.c
@@ -120,7 +120,9 @@ static int s3c244x_irq_add(struct sys_device *sysdev)
}
static struct sysdev_driver s3c2440_irq_driver = {
- .add = s3c244x_irq_add,
+ .add = s3c244x_irq_add,
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
};
static int s3c2440_irq_init(void)
@@ -131,9 +133,12 @@ static int s3c2440_irq_init(void)
arch_initcall(s3c2440_irq_init);
static struct sysdev_driver s3c2442_irq_driver = {
- .add = s3c244x_irq_add,
+ .add = s3c244x_irq_add,
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
};
+
static int s3c2442_irq_init(void)
{
return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver);
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index a7561a79fc8..2018c2e1dcc 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -41,15 +41,25 @@
.text
- /* s3c2410_cpu_suspend
+ /* s3c2410_cpu_save
*
- * put the cpu into sleep mode
+ * save enough of the CPU state to allow us to re-start
+ * pm.c code. as we store items like the sp/lr, we will
+ * end up returning from this function when the cpu resumes
+ * so the return value is set to mark this.
+ *
+ * This arangement means we avoid having to flush the cache
+ * from this code.
*
* entry:
- * r0 = sleep save block
+ * r0 = pointer to save block
+ *
+ * exit:
+ * r0 = 0 => we stored everything
+ * 1 => resumed from sleep
*/
-ENTRY(s3c2410_cpu_suspend)
+ENTRY(s3c2410_cpu_save)
stmfd sp!, { r4 - r12, lr }
@@ store co-processor registers
@@ -62,44 +72,14 @@ ENTRY(s3c2410_cpu_suspend)
stmia r0, { r4 - r13 }
- @@ flush the caches to ensure everything is back out to
- @@ SDRAM before the core powers down
-
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
- bl arm920_flush_kern_cache_all
-#endif
-
- @@ prepare cpu to sleep
-
- ldr r4, =S3C2410_REFRESH
- ldr r5, =S3C24XX_MISCCR
- ldr r6, =S3C2410_CLKCON
- ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB)
- ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB)
- ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB)
-
- orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command
- orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
- orr r9, r9, #S3C2410_CLKCON_POWER @ power down command
-
- teq pc, #0 @ first as a trial-run to load cache
- bl s3c2410_do_sleep
- teq r0, r0 @ now do it for real
- b s3c2410_do_sleep @
-
- @@ align next bit of code to cache line
- .align 8
-s3c2410_do_sleep:
- streq r7, [ r4 ] @ SDRAM sleep command
- streq r8, [ r5 ] @ SDRAM power-down config
- streq r9, [ r6 ] @ CPU sleep
-1: beq 1b
- mov pc, r14
+ mov r0, #0
+ ldmfd sp, { r4 - r12, pc }
@@ return to the caller, after having the MMU
@@ turned on, this restores the last bits from the
@@ stack
resume_with_mmu:
+ mov r0, #1
ldmfd sp!, { r4 - r12, pc }
.ltorg
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 6b22d8f0a00..c635efa7cd3 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -10,12 +10,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Modifications:
- * 14-Sep-2004 BJD Created
- * 18-Oct-2004 BJD Cleanups, and added code to report OC cleared
- * 09-Aug-2005 BJD Renamed s3c2410_report_oc to s3c2410_usb_report_oc
- * 09-Aug-2005 BJD Ports powered only if both are enabled
*/
#define DEBUG
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index a0dfa390e34..6496eb645ce 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -91,30 +91,29 @@ static struct mcp_plat_data collie_mcp_data = {
/*
* low-level UART features.
*/
-static struct locomo_dev *uart_dev = NULL;
+struct platform_device collie_locomo_device;
static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
{
- if (!uart_dev) return;
-
if (mctrl & TIOCM_RTS)
- locomo_gpio_write(uart_dev, LOCOMO_GPIO_RTS, 0);
+ locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
else
- locomo_gpio_write(uart_dev, LOCOMO_GPIO_RTS, 1);
+ locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
if (mctrl & TIOCM_DTR)
- locomo_gpio_write(uart_dev, LOCOMO_GPIO_DTR, 0);
+ locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
else
- locomo_gpio_write(uart_dev, LOCOMO_GPIO_DTR, 1);
+ locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
}
static u_int collie_uart_get_mctrl(struct uart_port *port)
{
int ret = TIOCM_CD;
unsigned int r;
- if (!uart_dev) return ret;
- r = locomo_gpio_read_output(uart_dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
+ r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
+ if (r == -ENODEV)
+ return ret;
if (r & LOCOMO_GPIO_CTS)
ret |= TIOCM_CTS;
if (r & LOCOMO_GPIO_DSR)
@@ -130,13 +129,11 @@ static struct sa1100_port_fns collie_port_fns __initdata = {
static int collie_uart_probe(struct locomo_dev *dev)
{
- uart_dev = dev;
return 0;
}
static int collie_uart_remove(struct locomo_dev *dev)
{
- uart_dev = NULL;
return 0;
}
@@ -170,7 +167,7 @@ static struct resource locomo_resources[] = {
},
};
-static struct platform_device locomo_device = {
+struct platform_device collie_locomo_device = {
.name = "locomo",
.id = 0,
.num_resources = ARRAY_SIZE(locomo_resources),
@@ -178,7 +175,7 @@ static struct platform_device locomo_device = {
};
static struct platform_device *devices[] __initdata = {
- &locomo_device,
+ &collie_locomo_device,
&colliescoop_device,
};
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 41b370090b6..13bbd08ff84 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -117,7 +117,6 @@ static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int wh
} else {
switch (size) {
case 1:
- addr &= ~3;
v = __raw_readb(addr);
break;
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index b4f220dd5eb..c0bfb8212b7 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -15,6 +15,7 @@ config CPU_ARM610
select CPU_32v3
select CPU_CACHE_V3
select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
select CPU_COPY_V3 if MMU
select CPU_TLB_V3 if MMU
help
@@ -24,6 +25,20 @@ config CPU_ARM610
Say Y if you want support for the ARM610 processor.
Otherwise, say N.
+# ARM7TDMI
+config CPU_ARM7TDMI
+ bool "Support ARM7TDMI processor"
+ depends on !MMU
+ select CPU_32v4T
+ select CPU_ABRT_LV4T
+ select CPU_CACHE_V4
+ help
+ A 32-bit RISC microprocessor based on the ARM7 processor core
+ which has no memory control unit and cache.
+
+ Say Y if you want support for the ARM7TDMI processor.
+ Otherwise, say N.
+
# ARM710
config CPU_ARM710
bool "Support ARM710 processor" if !ARCH_CLPS7500 && ARCH_RPC
@@ -31,6 +46,7 @@ config CPU_ARM710
select CPU_32v3
select CPU_CACHE_V3
select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
select CPU_COPY_V3 if MMU
select CPU_TLB_V3 if MMU
help
@@ -50,6 +66,7 @@ config CPU_ARM720T
select CPU_ABRT_LV4T
select CPU_CACHE_V4
select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
select CPU_COPY_V4WT if MMU
select CPU_TLB_V4WT if MMU
help
@@ -59,6 +76,36 @@ config CPU_ARM720T
Say Y if you want support for the ARM720T processor.
Otherwise, say N.
+# ARM740T
+config CPU_ARM740T
+ bool "Support ARM740T processor" if ARCH_INTEGRATOR
+ depends on !MMU
+ select CPU_32v4T
+ select CPU_ABRT_LV4T
+ select CPU_CACHE_V3 # although the core is v4t
+ select CPU_CP15_MPU
+ help
+ A 32-bit RISC processor with 8KB cache or 4KB variants,
+ write buffer and MPU(Protection Unit) built around
+ an ARM7TDMI core.
+
+ Say Y if you want support for the ARM740T processor.
+ Otherwise, say N.
+
+# ARM9TDMI
+config CPU_ARM9TDMI
+ bool "Support ARM9TDMI processor"
+ depends on !MMU
+ select CPU_32v4T
+ select CPU_ABRT_NOMMU
+ select CPU_CACHE_V4
+ help
+ A 32-bit RISC microprocessor based on the ARM9 processor core
+ which has no memory control unit and cache.
+
+ Say Y if you want support for the ARM9TDMI processor.
+ Otherwise, say N.
+
# ARM920T
config CPU_ARM920T
bool "Support ARM920T processor"
@@ -68,6 +115,7 @@ config CPU_ARM920T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
help
@@ -89,6 +137,7 @@ config CPU_ARM922T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
help
@@ -108,6 +157,7 @@ config CPU_ARM925T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
help
@@ -126,6 +176,7 @@ config CPU_ARM926T
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
help
@@ -136,6 +187,39 @@ config CPU_ARM926T
Say Y if you want support for the ARM926T processor.
Otherwise, say N.
+# ARM940T
+config CPU_ARM940T
+ bool "Support ARM940T processor" if ARCH_INTEGRATOR
+ depends on !MMU
+ select CPU_32v4T
+ select CPU_ABRT_NOMMU
+ select CPU_CACHE_VIVT
+ select CPU_CP15_MPU
+ help
+ ARM940T is a member of the ARM9TDMI family of general-
+ purpose microprocessors with MPU and seperate 4KB
+ instruction and 4KB data cases, each with a 4-word line
+ length.
+
+ Say Y if you want support for the ARM940T processor.
+ Otherwise, say N.
+
+# ARM946E-S
+config CPU_ARM946E
+ bool "Support ARM946E-S processor" if ARCH_INTEGRATOR
+ depends on !MMU
+ select CPU_32v5
+ select CPU_ABRT_NOMMU
+ select CPU_CACHE_VIVT
+ select CPU_CP15_MPU
+ help
+ ARM946E-S is a member of the ARM9E-S family of high-
+ performance, 32-bit system-on-chip processor solutions.
+ The TCM and ARMv5TE 32-bit instruction set is supported.
+
+ Say Y if you want support for the ARM946E-S processor.
+ Otherwise, say N.
+
# ARM1020 - needs validating
config CPU_ARM1020
bool "Support ARM1020T (rev 0) processor"
@@ -144,6 +228,7 @@ config CPU_ARM1020
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
help
@@ -161,6 +246,7 @@ config CPU_ARM1020E
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WBI if MMU
depends on n
@@ -172,6 +258,7 @@ config CPU_ARM1022
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU # can probably do better
select CPU_TLB_V4WBI if MMU
help
@@ -189,6 +276,7 @@ config CPU_ARM1026
select CPU_32v5
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU # can probably do better
select CPU_TLB_V4WBI if MMU
help
@@ -207,6 +295,7 @@ config CPU_SA110
select CPU_ABRT_EV4
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
select CPU_TLB_V4WB if MMU
help
@@ -227,16 +316,18 @@ config CPU_SA1100
select CPU_ABRT_EV4
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
select CPU_TLB_V4WB if MMU
# XScale
config CPU_XSCALE
bool
- depends on ARCH_IOP3XX || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000
+ depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000
default y
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
select CPU_TLB_V4WBI if MMU
# XScale Core Version 3
@@ -247,6 +338,7 @@ config CPU_XSC3
select CPU_32v5
select CPU_ABRT_EV5T
select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
select CPU_TLB_V4WBI if MMU
select IO_36
@@ -258,6 +350,7 @@ config CPU_V6
select CPU_ABRT_EV6
select CPU_CACHE_V6
select CPU_CACHE_VIPT
+ select CPU_CP15_MMU
select CPU_COPY_V6 if MMU
select CPU_TLB_V6 if MMU
@@ -299,6 +392,9 @@ config CPU_32v6
bool
# The abort model
+config CPU_ABRT_NOMMU
+ bool
+
config CPU_ABRT_EV4
bool
@@ -380,6 +476,23 @@ config CPU_TLB_V6
endif
+config CPU_CP15
+ bool
+ help
+ Processor has the CP15 register.
+
+config CPU_CP15_MMU
+ bool
+ select CPU_CP15
+ help
+ Processor has the CP15 register, which has MMU related registers.
+
+config CPU_CP15_MPU
+ bool
+ select CPU_CP15
+ help
+ Processor has the CP15 register, which has MPU related registers.
+
#
# CPU supports 36-bit I/O
#
@@ -390,7 +503,7 @@ comment "Processor Features"
config ARM_THUMB
bool "Support Thumb user binaries"
- depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6
+ depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6
default y
help
Say Y if you want to include kernel support for running user space
@@ -411,23 +524,48 @@ config CPU_BIG_ENDIAN
port must properly enable any big-endian related features
of your chipset/board/processor.
+config CPU_HIGH_VECTOR
+ depends !MMU && CPU_CP15 && !CPU_ARM740T
+ bool "Select the High exception vector"
+ default n
+ help
+ Say Y here to select high exception vector(0xFFFF0000~).
+ The exception vector can be vary depending on the platform
+ design in nommu mode. If your platform needs to select
+ high exception vector, say Y.
+ Otherwise or if you are unsure, say N, and the low exception
+ vector (0x00000000~) will be used.
+
config CPU_ICACHE_DISABLE
- bool "Disable I-Cache"
- depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6
+ bool "Disable I-Cache (I-bit)"
+ depends on CPU_CP15 && !(CPU_ARM610 || CPU_ARM710 || CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3)
help
Say Y here to disable the processor instruction cache. Unless
you have a reason not to or are unsure, say N.
config CPU_DCACHE_DISABLE
- bool "Disable D-Cache"
- depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6
+ bool "Disable D-Cache (C-bit)"
+ depends on CPU_CP15
help
Say Y here to disable the processor data cache. Unless
you have a reason not to or are unsure, say N.
+config CPU_DCACHE_SIZE
+ hex
+ depends on CPU_ARM740T || CPU_ARM946E
+ default 0x00001000 if CPU_ARM740T
+ default 0x00002000 # default size for ARM946E-S
+ help
+ Some cores are synthesizable to have various sized cache. For
+ ARM946E-S case, it can vary from 0KB to 1MB.
+ To support such cache operations, it is efficient to know the size
+ before compile time.
+ If your SoC is configured to have a different size, define the value
+ here with proper conditions.
+
config CPU_DCACHE_WRITETHROUGH
bool "Force write through D-cache"
- depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE
+ depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE
default y if CPU_ARM925T
help
Say Y here to use the data cache in writethrough mode. Unless you
@@ -435,7 +573,7 @@ config CPU_DCACHE_WRITETHROUGH
config CPU_CACHE_ROUND_ROBIN
bool "Round robin I and D cache replacement algorithm"
- depends on (CPU_ARM926T || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE)
+ depends on (CPU_ARM926T || CPU_ARM946E || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE)
help
Say Y here to use the predictable round-robin cache replacement
policy. Unless you specifically require this or are unsure, say N.
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 21a2770226e..d2f5672ecf6 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -6,7 +6,7 @@ obj-y := consistent.o extable.o fault.o init.o \
iomap.o
obj-$(CONFIG_MMU) += fault-armv.o flush.o ioremap.o mmap.o \
- mm-armv.o
+ pgd.o mmu.o
ifneq ($(CONFIG_MMU),y)
obj-y += nommu.o
@@ -17,6 +17,7 @@ obj-$(CONFIG_MODULES) += proc-syms.o
obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o
obj-$(CONFIG_DISCONTIGMEM) += discontig.o
+obj-$(CONFIG_CPU_ABRT_NOMMU) += abort-nommu.o
obj-$(CONFIG_CPU_ABRT_EV4) += abort-ev4.o
obj-$(CONFIG_CPU_ABRT_EV4T) += abort-ev4t.o
obj-$(CONFIG_CPU_ABRT_LV4T) += abort-lv4t.o
@@ -33,7 +34,7 @@ obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o
obj-$(CONFIG_CPU_COPY_V3) += copypage-v3.o
obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o
obj-$(CONFIG_CPU_COPY_V4WB) += copypage-v4wb.o
-obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o mmu.o
+obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o context.o
obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o
obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o
obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o
@@ -46,11 +47,16 @@ obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o
obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o
obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o
+obj-$(CONFIG_CPU_ARM7TDMI) += proc-arm7tdmi.o
obj-$(CONFIG_CPU_ARM720T) += proc-arm720.o
+obj-$(CONFIG_CPU_ARM740T) += proc-arm740.o
+obj-$(CONFIG_CPU_ARM9TDMI) += proc-arm9tdmi.o
obj-$(CONFIG_CPU_ARM920T) += proc-arm920.o
obj-$(CONFIG_CPU_ARM922T) += proc-arm922.o
obj-$(CONFIG_CPU_ARM925T) += proc-arm925.o
obj-$(CONFIG_CPU_ARM926T) += proc-arm926.o
+obj-$(CONFIG_CPU_ARM940T) += proc-arm940.o
+obj-$(CONFIG_CPU_ARM946E) += proc-arm946.o
obj-$(CONFIG_CPU_ARM1020) += proc-arm1020.o
obj-$(CONFIG_CPU_ARM1020E) += proc-arm1020e.o
obj-$(CONFIG_CPU_ARM1022) += proc-arm1022.o
diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S
index db743e51021..9fb7b0e25ea 100644
--- a/arch/arm/mm/abort-lv4t.S
+++ b/arch/arm/mm/abort-lv4t.S
@@ -19,11 +19,16 @@
*/
ENTRY(v4t_late_abort)
tst r3, #PSR_T_BIT @ check for thumb mode
+#ifdef CONFIG_CPU_CP15_MMU
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
+ bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR
+#else
+ mov r0, #0 @ clear r0, r1 (no FSR/FAR)
+ mov r1, #0
+#endif
bne .data_thumb_abort
ldr r8, [r2] @ read arm instruction
- bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR
tst r8, #1 << 20 @ L = 1 -> write?
orreq r1, r1, #1 << 11 @ yes.
and r7, r8, #15 << 24
diff --git a/arch/arm/mm/abort-nommu.S b/arch/arm/mm/abort-nommu.S
new file mode 100644
index 00000000000..a7cc7f9ee45
--- /dev/null
+++ b/arch/arm/mm/abort-nommu.S
@@ -0,0 +1,19 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+/*
+ * Function: nommu_early_abort
+ *
+ * Params : r2 = address of aborted instruction
+ * : r3 = saved SPSR
+ *
+ * Returns : r0 = 0 (abort address)
+ * : r1 = 0 (FSR)
+ *
+ * Note: There is no FSR/FAR on !CPU_CP15_MMU cores.
+ * Just fill zero into the registers.
+ */
+ .align 5
+ENTRY(nommu_early_abort)
+ mov r0, #0 @ clear r0, r1 (no FSR/FAR)
+ mov r1, #0
+ mov pc, lr
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index e0d21bbbe7d..aa109f074dd 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -735,7 +735,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
/*
* We got a fault - fix it up, or die.
*/
- do_bad_area(current, current->mm, addr, fsr, regs);
+ do_bad_area(addr, fsr, regs);
return 0;
swp:
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index b8ad5d58ebe..b2908063ed6 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -29,9 +29,13 @@ ENTRY(v4_flush_user_cache_all)
* Clean and invalidate the entire cache.
*/
ENTRY(v4_flush_kern_cache_all)
+#ifdef CPU_CP15
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 @ flush ID cache
mov pc, lr
+#else
+ /* FALLTHROUGH */
+#endif
/*
* flush_user_cache_range(start, end, flags)
@@ -44,9 +48,13 @@ ENTRY(v4_flush_kern_cache_all)
* - flags - vma_area_struct flags describing address space
*/
ENTRY(v4_flush_user_cache_range)
+#ifdef CPU_CP15
mov ip, #0
mcreq p15, 0, ip, c7, c7, 0 @ flush ID cache
mov pc, lr
+#else
+ /* FALLTHROUGH */
+#endif
/*
* coherent_kern_range(start, end)
@@ -108,8 +116,10 @@ ENTRY(v4_dma_inv_range)
* - end - virtual end address
*/
ENTRY(v4_dma_flush_range)
+#ifdef CPU_CP15
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 @ flush ID cache
+#endif
/* FALLTHROUGH */
/*
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
new file mode 100644
index 00000000000..79e80020242
--- /dev/null
+++ b/arch/arm/mm/context.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/arm/mm/context.c
+ *
+ * Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+unsigned int cpu_last_asid = { 1 << ASID_BITS };
+
+/*
+ * We fork()ed a process, and we need a new context for the child
+ * to run in. We reserve version 0 for initial tasks so we will
+ * always allocate an ASID.
+ */
+void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ mm->context.id = 0;
+}
+
+void __new_context(struct mm_struct *mm)
+{
+ unsigned int asid;
+
+ asid = ++cpu_last_asid;
+ if (asid == 0)
+ asid = cpu_last_asid = 1 << ASID_BITS;
+
+ /*
+ * If we've used up all our ASIDs, we need
+ * to start a new version and flush the TLB.
+ */
+ if ((asid & ~ASID_MASK) == 0)
+ flush_tlb_all();
+
+ mm->context.id = asid;
+}
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index fc69dccdace..df1645e14b4 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -20,6 +20,8 @@
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
+#include "mm.h"
+
/*
* 0xffff8000 to 0xffffffff is reserved for any ARM architecture
* specific hacks for copying pages efficiently.
@@ -27,8 +29,6 @@
#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
L_PTE_CACHEABLE)
-#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
-
static DEFINE_SPINLOCK(minicache_lock);
/*
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 269ce6913ee..3d0d3a963d2 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -17,6 +17,8 @@
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
+#include "mm.h"
+
#if SHMLBA > 16384
#error FIX ME
#endif
@@ -24,8 +26,6 @@
#define from_address (0xffff8000)
#define to_address (0xffffc000)
-#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
-
static DEFINE_SPINLOCK(v6_lock);
/*
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index 42a6ee255ce..84ebe0aa379 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -20,6 +20,8 @@
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
+#include "mm.h"
+
/*
* 0xffff8000 to 0xffffffff is reserved for any ARM architecture
* specific hacks for copying pages efficiently.
@@ -29,8 +31,6 @@
#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
L_PTE_CACHEABLE)
-#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
-
static DEFINE_SPINLOCK(minicache_lock);
/*
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index c5e0622c776..f0943d160ff 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -131,10 +131,11 @@ __do_user_fault(struct task_struct *tsk, unsigned long addr,
force_sig_info(sig, &si, tsk);
}
-void
-do_bad_area(struct task_struct *tsk, struct mm_struct *mm, unsigned long addr,
- unsigned int fsr, struct pt_regs *regs)
+void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
+ struct task_struct *tsk = current;
+ struct mm_struct *mm = tsk->active_mm;
+
/*
* If we are in kernel mode at this point, we
* have no context to handle this fault with.
@@ -319,7 +320,6 @@ static int
do_translation_fault(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
- struct task_struct *tsk;
unsigned int index;
pgd_t *pgd, *pgd_k;
pmd_t *pmd, *pmd_k;
@@ -351,9 +351,7 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
return 0;
bad_area:
- tsk = current;
-
- do_bad_area(tsk, tsk->active_mm, addr, fsr, regs);
+ do_bad_area(addr, fsr, regs);
return 0;
}
@@ -364,8 +362,7 @@ bad_area:
static int
do_sect_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
- struct task_struct *tsk = current;
- do_bad_area(tsk, tsk->active_mm, addr, fsr, regs);
+ do_bad_area(addr, fsr, regs);
return 0;
}
diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h
index 73b59e83227..49e9e3804de 100644
--- a/arch/arm/mm/fault.h
+++ b/arch/arm/mm/fault.h
@@ -1,6 +1,3 @@
-void do_bad_area(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long addr, unsigned int fsr, struct pt_regs *regs);
-
-void show_pte(struct mm_struct *mm, unsigned long addr);
+void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
unsigned long search_exception_table(unsigned long addr);
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index d438ce41cdd..454205b789d 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -15,12 +15,12 @@
#include <asm/system.h>
#include <asm/tlbflush.h>
+#include "mm.h"
+
#ifdef CONFIG_CPU_CACHE_VIPT
#define ALIAS_FLUSH_START 0xffff4000
-#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
-
static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
{
unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
@@ -107,7 +107,7 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
/* VIPT non-aliasing cache */
if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask) &&
- vma->vm_flags | VM_EXEC) {
+ vma->vm_flags & VM_EXEC) {
unsigned long addr = (unsigned long)kaddr;
/* only flushing the kernel mapping on non-aliasing VIPT */
__cpuc_coherent_kern_range(addr, addr + len);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index fe3f7f62500..22217fe2650 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -25,10 +25,9 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+#include "mm.h"
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-extern void _stext, _text, _etext, __data_start, _end, __init_begin, __init_end;
+extern void _text, _etext, __data_start, _end, __init_begin, __init_end;
extern unsigned long phys_initrd_start;
extern unsigned long phys_initrd_size;
@@ -38,12 +37,6 @@ extern unsigned long phys_initrd_size;
*/
static struct meminfo meminfo __initdata = { 0, };
-/*
- * empty_zero_page is a special page that is used for
- * zero-initialized data and COW.
- */
-struct page *empty_zero_page;
-
void show_mem(void)
{
int free = 0, total = 0, reserved = 0;
@@ -83,16 +76,6 @@ void show_mem(void)
printk("%d pages swap cached\n", cached);
}
-static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
-{
- return pmd_offset(pgd, virt);
-}
-
-static inline pmd_t *pmd_off_k(unsigned long virt)
-{
- return pmd_off(pgd_offset_k(virt), virt);
-}
-
#define for_each_nodebank(iter,mi,no) \
for (iter = 0; iter < mi->nr_banks; iter++) \
if (mi->bank[iter].node == no)
@@ -176,62 +159,20 @@ static int __init check_initrd(struct meminfo *mi)
return initrd_node;
}
-/*
- * Reserve the various regions of node 0
- */
-static __init void reserve_node_zero(pg_data_t *pgdat)
+static inline void map_memory_bank(struct membank *bank)
{
- unsigned long res_size = 0;
-
- /*
- * Register the kernel text and data with bootmem.
- * Note that this can only be in node 0.
- */
-#ifdef CONFIG_XIP_KERNEL
- reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start);
-#else
- reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext);
-#endif
-
- /*
- * Reserve the page tables. These are already in use,
- * and can only be in node 0.
- */
- reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
- PTRS_PER_PGD * sizeof(pgd_t));
-
- /*
- * Hmm... This should go elsewhere, but we really really need to
- * stop things allocating the low memory; ideally we need a better
- * implementation of GFP_DMA which does not assume that DMA-able
- * memory starts at zero.
- */
- if (machine_is_integrator() || machine_is_cintegrator())
- res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
+#ifdef CONFIG_MMU
+ struct map_desc map;
- /*
- * These should likewise go elsewhere. They pre-reserve the
- * screen memory region at the start of main system memory.
- */
- if (machine_is_edb7211())
- res_size = 0x00020000;
- if (machine_is_p720t())
- res_size = 0x00014000;
+ map.pfn = __phys_to_pfn(bank->start);
+ map.virtual = __phys_to_virt(bank->start);
+ map.length = bank->size;
+ map.type = MT_MEMORY;
-#ifdef CONFIG_SA1111
- /*
- * Because of the SA1111 DMA bug, we want to preserve our
- * precious DMA-able memory...
- */
- res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
+ create_mapping(&map);
#endif
- if (res_size)
- reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size);
}
-void __init build_mem_type_table(void);
-void __init create_mapping(struct map_desc *md);
-
static unsigned long __init
bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
{
@@ -248,23 +189,18 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
* Calculate the pfn range, and map the memory banks for this node.
*/
for_each_nodebank(i, mi, node) {
+ struct membank *bank = &mi->bank[i];
unsigned long start, end;
- struct map_desc map;
- start = mi->bank[i].start >> PAGE_SHIFT;
- end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT;
+ start = bank->start >> PAGE_SHIFT;
+ end = (bank->start + bank->size) >> PAGE_SHIFT;
if (start_pfn > start)
start_pfn = start;
if (end_pfn < end)
end_pfn = end;
- map.pfn = __phys_to_pfn(mi->bank[i].start);
- map.virtual = __phys_to_virt(mi->bank[i].start);
- map.length = mi->bank[i].size;
- map.type = MT_MEMORY;
-
- create_mapping(&map);
+ map_memory_bank(bank);
}
/*
@@ -346,9 +282,9 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
return end_pfn;
}
-static void __init bootmem_init(struct meminfo *mi)
+void __init bootmem_init(struct meminfo *mi)
{
- unsigned long addr, memend_pfn = 0;
+ unsigned long memend_pfn = 0;
int node, initrd_node, i;
/*
@@ -361,26 +297,6 @@ static void __init bootmem_init(struct meminfo *mi)
memcpy(&meminfo, mi, sizeof(meminfo));
/*
- * Clear out all the mappings below the kernel image.
- */
- for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE)
- pmd_clear(pmd_off_k(addr));
-#ifdef CONFIG_XIP_KERNEL
- /* The XIP kernel is mapped in the module area -- skip over it */
- addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
-#endif
- for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
- pmd_clear(pmd_off_k(addr));
-
- /*
- * Clear out all the kernel space mappings, except for the first
- * memory bank, up to the end of the vmalloc region.
- */
- for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
- addr < VMALLOC_END; addr += PGDIR_SIZE)
- pmd_clear(pmd_off_k(addr));
-
- /*
* Locate which node contains the ramdisk image, if any.
*/
initrd_node = check_initrd(mi);
@@ -413,114 +329,6 @@ static void __init bootmem_init(struct meminfo *mi)
max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
}
-/*
- * Set up device the mappings. Since we clear out the page tables for all
- * mappings above VMALLOC_END, we will remove any debug device mappings.
- * This means you have to be careful how you debug this function, or any
- * called function. This means you can't use any function or debugging
- * method which may touch any device, otherwise the kernel _will_ crash.
- */
-static void __init devicemaps_init(struct machine_desc *mdesc)
-{
- struct map_desc map;
- unsigned long addr;
- void *vectors;
-
- /*
- * Allocate the vector page early.
- */
- vectors = alloc_bootmem_low_pages(PAGE_SIZE);
- BUG_ON(!vectors);
-
- for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
- pmd_clear(pmd_off_k(addr));
-
- /*
- * Map the kernel if it is XIP.
- * It is always first in the modulearea.
- */
-#ifdef CONFIG_XIP_KERNEL
- map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & PGDIR_MASK);
- map.virtual = MODULE_START;
- map.length = ((unsigned long)&_etext - map.virtual + ~PGDIR_MASK) & PGDIR_MASK;
- map.type = MT_ROM;
- create_mapping(&map);
-#endif
-
- /*
- * Map the cache flushing regions.
- */
-#ifdef FLUSH_BASE
- map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
- map.virtual = FLUSH_BASE;
- map.length = SZ_1M;
- map.type = MT_CACHECLEAN;
- create_mapping(&map);
-#endif
-#ifdef FLUSH_BASE_MINICACHE
- map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M);
- map.virtual = FLUSH_BASE_MINICACHE;
- map.length = SZ_1M;
- map.type = MT_MINICLEAN;
- create_mapping(&map);
-#endif
-
- /*
- * Create a mapping for the machine vectors at the high-vectors
- * location (0xffff0000). If we aren't using high-vectors, also
- * create a mapping at the low-vectors virtual address.
- */
- map.pfn = __phys_to_pfn(virt_to_phys(vectors));
- map.virtual = 0xffff0000;
- map.length = PAGE_SIZE;
- map.type = MT_HIGH_VECTORS;
- create_mapping(&map);
-
- if (!vectors_high()) {
- map.virtual = 0;
- map.type = MT_LOW_VECTORS;
- create_mapping(&map);
- }
-
- /*
- * Ask the machine support to map in the statically mapped devices.
- */
- if (mdesc->map_io)
- mdesc->map_io();
-
- /*
- * Finally flush the caches and tlb to ensure that we're in a
- * consistent state wrt the writebuffer. This also ensures that
- * any write-allocated cache lines in the vector page are written
- * back. After this point, we can start to touch devices again.
- */
- local_flush_tlb_all();
- flush_cache_all();
-}
-
-/*
- * paging_init() sets up the page tables, initialises the zone memory
- * maps, and sets up the zero page, bad page and bad page tables.
- */
-void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
-{
- void *zero_page;
-
- build_mem_type_table();
- bootmem_init(mi);
- devicemaps_init(mdesc);
-
- top_pmd = pmd_off_k(0xffff0000);
-
- /*
- * allocate the zero page. Note that we count on this going ok.
- */
- zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
- memzero(zero_page, PAGE_SIZE);
- empty_zero_page = virt_to_page(zero_page);
- flush_dcache_page(empty_zero_page);
-}
-
static inline void free_area(unsigned long addr, unsigned long end, char *s)
{
unsigned int size = (end - addr) >> 10;
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
deleted file mode 100644
index 38769f5862b..00000000000
--- a/arch/arm/mm/mm-armv.c
+++ /dev/null
@@ -1,663 +0,0 @@
-/*
- * linux/arch/arm/mm/mm-armv.c
- *
- * Copyright (C) 1998-2005 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Page table sludge for ARM v3 and v4 processor architectures.
- */
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/highmem.h>
-#include <linux/nodemask.h>
-
-#include <asm/pgalloc.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/tlbflush.h>
-
-#include <asm/mach/map.h>
-
-#define CPOLICY_UNCACHED 0
-#define CPOLICY_BUFFERED 1
-#define CPOLICY_WRITETHROUGH 2
-#define CPOLICY_WRITEBACK 3
-#define CPOLICY_WRITEALLOC 4
-
-static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK;
-static unsigned int ecc_mask __initdata = 0;
-pgprot_t pgprot_kernel;
-
-EXPORT_SYMBOL(pgprot_kernel);
-
-pmd_t *top_pmd;
-
-struct cachepolicy {
- const char policy[16];
- unsigned int cr_mask;
- unsigned int pmd;
- unsigned int pte;
-};
-
-static struct cachepolicy cache_policies[] __initdata = {
- {
- .policy = "uncached",
- .cr_mask = CR_W|CR_C,
- .pmd = PMD_SECT_UNCACHED,
- .pte = 0,
- }, {
- .policy = "buffered",
- .cr_mask = CR_C,
- .pmd = PMD_SECT_BUFFERED,
- .pte = PTE_BUFFERABLE,
- }, {
- .policy = "writethrough",
- .cr_mask = 0,
- .pmd = PMD_SECT_WT,
- .pte = PTE_CACHEABLE,
- }, {
- .policy = "writeback",
- .cr_mask = 0,
- .pmd = PMD_SECT_WB,
- .pte = PTE_BUFFERABLE|PTE_CACHEABLE,
- }, {
- .policy = "writealloc",
- .cr_mask = 0,
- .pmd = PMD_SECT_WBWA,
- .pte = PTE_BUFFERABLE|PTE_CACHEABLE,
- }
-};
-
-/*
- * These are useful for identifing cache coherency
- * problems by allowing the cache or the cache and
- * writebuffer to be turned off. (Note: the write
- * buffer should not be on and the cache off).
- */
-static void __init early_cachepolicy(char **p)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(cache_policies); i++) {
- int len = strlen(cache_policies[i].policy);
-
- if (memcmp(*p, cache_policies[i].policy, len) == 0) {
- cachepolicy = i;
- cr_alignment &= ~cache_policies[i].cr_mask;
- cr_no_alignment &= ~cache_policies[i].cr_mask;
- *p += len;
- break;
- }
- }
- if (i == ARRAY_SIZE(cache_policies))
- printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n");
- flush_cache_all();
- set_cr(cr_alignment);
-}
-
-static void __init early_nocache(char **__unused)
-{
- char *p = "buffered";
- printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p);
- early_cachepolicy(&p);
-}
-
-static void __init early_nowrite(char **__unused)
-{
- char *p = "uncached";
- printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p);
- early_cachepolicy(&p);
-}
-
-static void __init early_ecc(char **p)
-{
- if (memcmp(*p, "on", 2) == 0) {
- ecc_mask = PMD_PROTECTION;
- *p += 2;
- } else if (memcmp(*p, "off", 3) == 0) {
- ecc_mask = 0;
- *p += 3;
- }
-}
-
-__early_param("nocache", early_nocache);
-__early_param("nowb", early_nowrite);
-__early_param("cachepolicy=", early_cachepolicy);
-__early_param("ecc=", early_ecc);
-
-static int __init noalign_setup(char *__unused)
-{
- cr_alignment &= ~CR_A;
- cr_no_alignment &= ~CR_A;
- set_cr(cr_alignment);
- return 1;
-}
-
-__setup("noalign", noalign_setup);
-
-#define FIRST_KERNEL_PGD_NR (FIRST_USER_PGD_NR + USER_PTRS_PER_PGD)
-
-static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
-{
- return pmd_offset(pgd, virt);
-}
-
-static inline pmd_t *pmd_off_k(unsigned long virt)
-{
- return pmd_off(pgd_offset_k(virt), virt);
-}
-
-/*
- * need to get a 16k page for level 1
- */
-pgd_t *get_pgd_slow(struct mm_struct *mm)
-{
- pgd_t *new_pgd, *init_pgd;
- pmd_t *new_pmd, *init_pmd;
- pte_t *new_pte, *init_pte;
-
- new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 2);
- if (!new_pgd)
- goto no_pgd;
-
- memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t));
-
- /*
- * Copy over the kernel and IO PGD entries
- */
- init_pgd = pgd_offset_k(0);
- memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
- (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
-
- clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
-
- if (!vectors_high()) {
- /*
- * On ARM, first page must always be allocated since it
- * contains the machine vectors.
- */
- new_pmd = pmd_alloc(mm, new_pgd, 0);
- if (!new_pmd)
- goto no_pmd;
-
- new_pte = pte_alloc_map(mm, new_pmd, 0);
- if (!new_pte)
- goto no_pte;
-
- init_pmd = pmd_offset(init_pgd, 0);
- init_pte = pte_offset_map_nested(init_pmd, 0);
- set_pte(new_pte, *init_pte);
- pte_unmap_nested(init_pte);
- pte_unmap(new_pte);
- }
-
- return new_pgd;
-
-no_pte:
- pmd_free(new_pmd);
-no_pmd:
- free_pages((unsigned long)new_pgd, 2);
-no_pgd:
- return NULL;
-}
-
-void free_pgd_slow(pgd_t *pgd)
-{
- pmd_t *pmd;
- struct page *pte;
-
- if (!pgd)
- return;
-
- /* pgd is always present and good */
- pmd = pmd_off(pgd, 0);
- if (pmd_none(*pmd))
- goto free;
- if (pmd_bad(*pmd)) {
- pmd_ERROR(*pmd);
- pmd_clear(pmd);
- goto free;
- }
-
- pte = pmd_page(*pmd);
- pmd_clear(pmd);
- dec_zone_page_state(virt_to_page((unsigned long *)pgd), NR_PAGETABLE);
- pte_lock_deinit(pte);
- pte_free(pte);
- pmd_free(pmd);
-free:
- free_pages((unsigned long) pgd, 2);
-}
-
-/*
- * Create a SECTION PGD between VIRT and PHYS in domain
- * DOMAIN with protection PROT. This operates on half-
- * pgdir entry increments.
- */
-static inline void
-alloc_init_section(unsigned long virt, unsigned long phys, int prot)
-{
- pmd_t *pmdp = pmd_off_k(virt);
-
- if (virt & (1 << 20))
- pmdp++;
-
- *pmdp = __pmd(phys | prot);
- flush_pmd_entry(pmdp);
-}
-
-/*
- * Create a SUPER SECTION PGD between VIRT and PHYS with protection PROT
- */
-static inline void
-alloc_init_supersection(unsigned long virt, unsigned long phys, int prot)
-{
- int i;
-
- for (i = 0; i < 16; i += 1) {
- alloc_init_section(virt, phys, prot | PMD_SECT_SUPER);
-
- virt += (PGDIR_SIZE / 2);
- }
-}
-
-/*
- * Add a PAGE mapping between VIRT and PHYS in domain
- * DOMAIN with protection PROT. Note that due to the
- * way we map the PTEs, we must allocate two PTE_SIZE'd
- * blocks - one for the Linux pte table, and one for
- * the hardware pte table.
- */
-static inline void
-alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pgprot_t prot)
-{
- pmd_t *pmdp = pmd_off_k(virt);
- pte_t *ptep;
-
- if (pmd_none(*pmdp)) {
- ptep = alloc_bootmem_low_pages(2 * PTRS_PER_PTE *
- sizeof(pte_t));
-
- __pmd_populate(pmdp, __pa(ptep) | prot_l1);
- }
- ptep = pte_offset_kernel(pmdp, virt);
-
- set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot));
-}
-
-struct mem_types {
- unsigned int prot_pte;
- unsigned int prot_l1;
- unsigned int prot_sect;
- unsigned int domain;
-};
-
-static struct mem_types mem_types[] __initdata = {
- [MT_DEVICE] = {
- .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
- L_PTE_WRITE,
- .prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED |
- PMD_SECT_AP_WRITE,
- .domain = DOMAIN_IO,
- },
- [MT_CACHECLEAN] = {
- .prot_sect = PMD_TYPE_SECT | PMD_BIT4,
- .domain = DOMAIN_KERNEL,
- },
- [MT_MINICLEAN] = {
- .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_MINICACHE,
- .domain = DOMAIN_KERNEL,
- },
- [MT_LOW_VECTORS] = {
- .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
- L_PTE_EXEC,
- .prot_l1 = PMD_TYPE_TABLE,
- .domain = DOMAIN_USER,
- },
- [MT_HIGH_VECTORS] = {
- .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
- L_PTE_USER | L_PTE_EXEC,
- .prot_l1 = PMD_TYPE_TABLE,
- .domain = DOMAIN_USER,
- },
- [MT_MEMORY] = {
- .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_AP_WRITE,
- .domain = DOMAIN_KERNEL,
- },
- [MT_ROM] = {
- .prot_sect = PMD_TYPE_SECT | PMD_BIT4,
- .domain = DOMAIN_KERNEL,
- },
- [MT_IXP2000_DEVICE] = { /* IXP2400 requires XCB=101 for on-chip I/O */
- .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
- L_PTE_WRITE,
- .prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED |
- PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE |
- PMD_SECT_TEX(1),
- .domain = DOMAIN_IO,
- },
- [MT_NONSHARED_DEVICE] = {
- .prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_NONSHARED_DEV |
- PMD_SECT_AP_WRITE,
- .domain = DOMAIN_IO,
- }
-};
-
-/*
- * Adjust the PMD section entries according to the CPU in use.
- */
-void __init build_mem_type_table(void)
-{
- struct cachepolicy *cp;
- unsigned int cr = get_cr();
- unsigned int user_pgprot, kern_pgprot;
- int cpu_arch = cpu_architecture();
- int i;
-
-#if defined(CONFIG_CPU_DCACHE_DISABLE)
- if (cachepolicy > CPOLICY_BUFFERED)
- cachepolicy = CPOLICY_BUFFERED;
-#elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH)
- if (cachepolicy > CPOLICY_WRITETHROUGH)
- cachepolicy = CPOLICY_WRITETHROUGH;
-#endif
- if (cpu_arch < CPU_ARCH_ARMv5) {
- if (cachepolicy >= CPOLICY_WRITEALLOC)
- cachepolicy = CPOLICY_WRITEBACK;
- ecc_mask = 0;
- }
-
- /*
- * Xscale must not have PMD bit 4 set for section mappings.
- */
- if (cpu_is_xscale())
- for (i = 0; i < ARRAY_SIZE(mem_types); i++)
- mem_types[i].prot_sect &= ~PMD_BIT4;
-
- /*
- * ARMv5 and lower, excluding Xscale, bit 4 must be set for
- * page tables.
- */
- if (cpu_arch < CPU_ARCH_ARMv6 && !cpu_is_xscale())
- for (i = 0; i < ARRAY_SIZE(mem_types); i++)
- if (mem_types[i].prot_l1)
- mem_types[i].prot_l1 |= PMD_BIT4;
-
- cp = &cache_policies[cachepolicy];
- kern_pgprot = user_pgprot = cp->pte;
-
- /*
- * Enable CPU-specific coherency if supported.
- * (Only available on XSC3 at the moment.)
- */
- if (arch_is_coherent()) {
- if (cpu_is_xsc3()) {
- mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
- mem_types[MT_MEMORY].prot_pte |= L_PTE_COHERENT;
- }
- }
-
- /*
- * ARMv6 and above have extended page tables.
- */
- if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
- /*
- * bit 4 becomes XN which we must clear for the
- * kernel memory mapping.
- */
- mem_types[MT_MEMORY].prot_sect &= ~PMD_SECT_XN;
- mem_types[MT_ROM].prot_sect &= ~PMD_SECT_XN;
-
- /*
- * Mark cache clean areas and XIP ROM read only
- * from SVC mode and no access from userspace.
- */
- mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
- mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
- mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
-
- /*
- * Mark the device area as "shared device"
- */
- mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE;
- mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
-
- /*
- * User pages need to be mapped with the ASID
- * (iow, non-global)
- */
- user_pgprot |= L_PTE_ASID;
-
-#ifdef CONFIG_SMP
- /*
- * Mark memory with the "shared" attribute for SMP systems
- */
- user_pgprot |= L_PTE_SHARED;
- kern_pgprot |= L_PTE_SHARED;
- mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
-#endif
- }
-
- for (i = 0; i < 16; i++) {
- unsigned long v = pgprot_val(protection_map[i]);
- v = (v & ~(L_PTE_BUFFERABLE|L_PTE_CACHEABLE)) | user_pgprot;
- protection_map[i] = __pgprot(v);
- }
-
- mem_types[MT_LOW_VECTORS].prot_pte |= kern_pgprot;
- mem_types[MT_HIGH_VECTORS].prot_pte |= kern_pgprot;
-
- if (cpu_arch >= CPU_ARCH_ARMv5) {
-#ifndef CONFIG_SMP
- /*
- * Only use write-through for non-SMP systems
- */
- mem_types[MT_LOW_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE;
- mem_types[MT_HIGH_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE;
-#endif
- } else {
- mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1);
- }
-
- pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
- L_PTE_DIRTY | L_PTE_WRITE |
- L_PTE_EXEC | kern_pgprot);
-
- mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
- mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
- mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
- mem_types[MT_ROM].prot_sect |= cp->pmd;
-
- switch (cp->pmd) {
- case PMD_SECT_WT:
- mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT;
- break;
- case PMD_SECT_WB:
- case PMD_SECT_WBWA:
- mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB;
- break;
- }
- printk("Memory policy: ECC %sabled, Data cache %s\n",
- ecc_mask ? "en" : "dis", cp->policy);
-}
-
-#define vectors_base() (vectors_high() ? 0xffff0000 : 0)
-
-/*
- * Create the page directory entries and any necessary
- * page tables for the mapping specified by `md'. We
- * are able to cope here with varying sizes and address
- * offsets, and we take full advantage of sections and
- * supersections.
- */
-void __init create_mapping(struct map_desc *md)
-{
- unsigned long virt, length;
- int prot_sect, prot_l1, domain;
- pgprot_t prot_pte;
- unsigned long off = (u32)__pfn_to_phys(md->pfn);
-
- if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
- printk(KERN_WARNING "BUG: not creating mapping for "
- "0x%08llx at 0x%08lx in user region\n",
- __pfn_to_phys((u64)md->pfn), md->virtual);
- return;
- }
-
- if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
- md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
- printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx "
- "overlaps vmalloc space\n",
- __pfn_to_phys((u64)md->pfn), md->virtual);
- }
-
- domain = mem_types[md->type].domain;
- prot_pte = __pgprot(mem_types[md->type].prot_pte);
- prot_l1 = mem_types[md->type].prot_l1 | PMD_DOMAIN(domain);
- prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain);
-
- /*
- * Catch 36-bit addresses
- */
- if(md->pfn >= 0x100000) {
- if(domain) {
- printk(KERN_ERR "MM: invalid domain in supersection "
- "mapping for 0x%08llx at 0x%08lx\n",
- __pfn_to_phys((u64)md->pfn), md->virtual);
- return;
- }
- if((md->virtual | md->length | __pfn_to_phys(md->pfn))
- & ~SUPERSECTION_MASK) {
- printk(KERN_ERR "MM: cannot create mapping for "
- "0x%08llx at 0x%08lx invalid alignment\n",
- __pfn_to_phys((u64)md->pfn), md->virtual);
- return;
- }
-
- /*
- * Shift bits [35:32] of address into bits [23:20] of PMD
- * (See ARMv6 spec).
- */
- off |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
- }
-
- virt = md->virtual;
- off -= virt;
- length = md->length;
-
- if (mem_types[md->type].prot_l1 == 0 &&
- (virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) {
- printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
- "be mapped using pages, ignoring.\n",
- __pfn_to_phys(md->pfn), md->virtual);
- return;
- }
-
- while ((virt & 0xfffff || (virt + off) & 0xfffff) && length >= PAGE_SIZE) {
- alloc_init_page(virt, virt + off, prot_l1, prot_pte);
-
- virt += PAGE_SIZE;
- length -= PAGE_SIZE;
- }
-
- /* N.B. ARMv6 supersections are only defined to work with domain 0.
- * Since domain assignments can in fact be arbitrary, the
- * 'domain == 0' check below is required to insure that ARMv6
- * supersections are only allocated for domain 0 regardless
- * of the actual domain assignments in use.
- */
- if ((cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3())
- && domain == 0) {
- /*
- * Align to supersection boundary if !high pages.
- * High pages have already been checked for proper
- * alignment above and they will fail the SUPSERSECTION_MASK
- * check because of the way the address is encoded into
- * offset.
- */
- if (md->pfn <= 0x100000) {
- while ((virt & ~SUPERSECTION_MASK ||
- (virt + off) & ~SUPERSECTION_MASK) &&
- length >= (PGDIR_SIZE / 2)) {
- alloc_init_section(virt, virt + off, prot_sect);
-
- virt += (PGDIR_SIZE / 2);
- length -= (PGDIR_SIZE / 2);
- }
- }
-
- while (length >= SUPERSECTION_SIZE) {
- alloc_init_supersection(virt, virt + off, prot_sect);
-
- virt += SUPERSECTION_SIZE;
- length -= SUPERSECTION_SIZE;
- }
- }
-
- /*
- * A section mapping covers half a "pgdir" entry.
- */
- while (length >= (PGDIR_SIZE / 2)) {
- alloc_init_section(virt, virt + off, prot_sect);
-
- virt += (PGDIR_SIZE / 2);
- length -= (PGDIR_SIZE / 2);
- }
-
- while (length >= PAGE_SIZE) {
- alloc_init_page(virt, virt + off, prot_l1, prot_pte);
-
- virt += PAGE_SIZE;
- length -= PAGE_SIZE;
- }
-}
-
-/*
- * In order to soft-boot, we need to insert a 1:1 mapping in place of
- * the user-mode pages. This will then ensure that we have predictable
- * results when turning the mmu off
- */
-void setup_mm_for_reboot(char mode)
-{
- unsigned long base_pmdval;
- pgd_t *pgd;
- int i;
-
- if (current->mm && current->mm->pgd)
- pgd = current->mm->pgd;
- else
- pgd = init_mm.pgd;
-
- base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
- if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
- base_pmdval |= PMD_BIT4;
-
- for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
- unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval;
- pmd_t *pmd;
-
- pmd = pmd_off(pgd, i << PGDIR_SHIFT);
- pmd[0] = __pmd(pmdval);
- pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
- flush_pmd_entry(pmd);
- }
-}
-
-/*
- * Create the architecture specific mappings
- */
-void __init iotable_init(struct map_desc *io_desc, int nr)
-{
- int i;
-
- for (i = 0; i < nr; i++)
- create_mapping(io_desc + i);
-}
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
new file mode 100644
index 00000000000..bb2bc9ab6bd
--- /dev/null
+++ b/arch/arm/mm/mm.h
@@ -0,0 +1,22 @@
+/* the upper-most page table pointer */
+extern pmd_t *top_pmd;
+
+#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
+
+static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
+{
+ return pmd_offset(pgd, virt);
+}
+
+static inline pmd_t *pmd_off_k(unsigned long virt)
+{
+ return pmd_off(pgd_offset_k(virt), virt);
+}
+
+struct map_desc;
+struct meminfo;
+struct pglist_data;
+
+void __init create_mapping(struct map_desc *md);
+void __init bootmem_init(struct meminfo *mi);
+void reserve_node_zero(struct pglist_data *pgdat);
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 29e54807c5b..b0b5f469407 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -114,3 +114,25 @@ full_search:
}
}
+
+/*
+ * You really shouldn't be using read() or write() on /dev/mem. This
+ * might go away in the future.
+ */
+int valid_phys_addr_range(unsigned long addr, size_t size)
+{
+ if (addr + size > __pa(high_memory))
+ return 0;
+
+ return 1;
+}
+
+/*
+ * We don't use supersection mappings for mmap() on /dev/mem, which
+ * means that we can't map the memory area above the 4G barrier into
+ * userspace.
+ */
+int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
+{
+ return !(pfn + (size >> PAGE_SHIFT) > 0x00100000);
+}
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 0d90227a0a3..e566cbe4b22 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1,45 +1,771 @@
/*
* linux/arch/arm/mm/mmu.c
*
- * Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved.
+ * Copyright (C) 1995-2005 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/mman.h>
+#include <linux/nodemask.h>
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+#include <asm/sizes.h>
+#include <asm/tlb.h>
-unsigned int cpu_last_asid = { 1 << ASID_BITS };
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "mm.h"
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+extern void _stext, __data_start, _end;
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/*
+ * empty_zero_page is a special page that is used for
+ * zero-initialized data and COW.
+ */
+struct page *empty_zero_page;
/*
- * We fork()ed a process, and we need a new context for the child
- * to run in. We reserve version 0 for initial tasks so we will
- * always allocate an ASID.
+ * The pmd table for the upper-most set of pages.
*/
-void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+pmd_t *top_pmd;
+
+#define CPOLICY_UNCACHED 0
+#define CPOLICY_BUFFERED 1
+#define CPOLICY_WRITETHROUGH 2
+#define CPOLICY_WRITEBACK 3
+#define CPOLICY_WRITEALLOC 4
+
+static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK;
+static unsigned int ecc_mask __initdata = 0;
+pgprot_t pgprot_kernel;
+
+EXPORT_SYMBOL(pgprot_kernel);
+
+struct cachepolicy {
+ const char policy[16];
+ unsigned int cr_mask;
+ unsigned int pmd;
+ unsigned int pte;
+};
+
+static struct cachepolicy cache_policies[] __initdata = {
+ {
+ .policy = "uncached",
+ .cr_mask = CR_W|CR_C,
+ .pmd = PMD_SECT_UNCACHED,
+ .pte = 0,
+ }, {
+ .policy = "buffered",
+ .cr_mask = CR_C,
+ .pmd = PMD_SECT_BUFFERED,
+ .pte = PTE_BUFFERABLE,
+ }, {
+ .policy = "writethrough",
+ .cr_mask = 0,
+ .pmd = PMD_SECT_WT,
+ .pte = PTE_CACHEABLE,
+ }, {
+ .policy = "writeback",
+ .cr_mask = 0,
+ .pmd = PMD_SECT_WB,
+ .pte = PTE_BUFFERABLE|PTE_CACHEABLE,
+ }, {
+ .policy = "writealloc",
+ .cr_mask = 0,
+ .pmd = PMD_SECT_WBWA,
+ .pte = PTE_BUFFERABLE|PTE_CACHEABLE,
+ }
+};
+
+/*
+ * These are useful for identifing cache coherency
+ * problems by allowing the cache or the cache and
+ * writebuffer to be turned off. (Note: the write
+ * buffer should not be on and the cache off).
+ */
+static void __init early_cachepolicy(char **p)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(cache_policies); i++) {
+ int len = strlen(cache_policies[i].policy);
+
+ if (memcmp(*p, cache_policies[i].policy, len) == 0) {
+ cachepolicy = i;
+ cr_alignment &= ~cache_policies[i].cr_mask;
+ cr_no_alignment &= ~cache_policies[i].cr_mask;
+ *p += len;
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(cache_policies))
+ printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n");
+ flush_cache_all();
+ set_cr(cr_alignment);
+}
+__early_param("cachepolicy=", early_cachepolicy);
+
+static void __init early_nocache(char **__unused)
+{
+ char *p = "buffered";
+ printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p);
+ early_cachepolicy(&p);
+}
+__early_param("nocache", early_nocache);
+
+static void __init early_nowrite(char **__unused)
+{
+ char *p = "uncached";
+ printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p);
+ early_cachepolicy(&p);
+}
+__early_param("nowb", early_nowrite);
+
+static void __init early_ecc(char **p)
+{
+ if (memcmp(*p, "on", 2) == 0) {
+ ecc_mask = PMD_PROTECTION;
+ *p += 2;
+ } else if (memcmp(*p, "off", 3) == 0) {
+ ecc_mask = 0;
+ *p += 3;
+ }
+}
+__early_param("ecc=", early_ecc);
+
+static int __init noalign_setup(char *__unused)
{
- mm->context.id = 0;
+ cr_alignment &= ~CR_A;
+ cr_no_alignment &= ~CR_A;
+ set_cr(cr_alignment);
+ return 1;
}
+__setup("noalign", noalign_setup);
+
+struct mem_types {
+ unsigned int prot_pte;
+ unsigned int prot_l1;
+ unsigned int prot_sect;
+ unsigned int domain;
+};
-void __new_context(struct mm_struct *mm)
+static struct mem_types mem_types[] __initdata = {
+ [MT_DEVICE] = {
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_WRITE,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED |
+ PMD_SECT_AP_WRITE,
+ .domain = DOMAIN_IO,
+ },
+ [MT_CACHECLEAN] = {
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4,
+ .domain = DOMAIN_KERNEL,
+ },
+ [MT_MINICLEAN] = {
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_MINICACHE,
+ .domain = DOMAIN_KERNEL,
+ },
+ [MT_LOW_VECTORS] = {
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_EXEC,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .domain = DOMAIN_USER,
+ },
+ [MT_HIGH_VECTORS] = {
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_USER | L_PTE_EXEC,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .domain = DOMAIN_USER,
+ },
+ [MT_MEMORY] = {
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_AP_WRITE,
+ .domain = DOMAIN_KERNEL,
+ },
+ [MT_ROM] = {
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4,
+ .domain = DOMAIN_KERNEL,
+ },
+ [MT_IXP2000_DEVICE] = { /* IXP2400 requires XCB=101 for on-chip I/O */
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_WRITE,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED |
+ PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE |
+ PMD_SECT_TEX(1),
+ .domain = DOMAIN_IO,
+ },
+ [MT_NONSHARED_DEVICE] = {
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_NONSHARED_DEV |
+ PMD_SECT_AP_WRITE,
+ .domain = DOMAIN_IO,
+ }
+};
+
+/*
+ * Adjust the PMD section entries according to the CPU in use.
+ */
+static void __init build_mem_type_table(void)
{
- unsigned int asid;
+ struct cachepolicy *cp;
+ unsigned int cr = get_cr();
+ unsigned int user_pgprot, kern_pgprot;
+ int cpu_arch = cpu_architecture();
+ int i;
- asid = ++cpu_last_asid;
- if (asid == 0)
- asid = cpu_last_asid = 1 << ASID_BITS;
+#if defined(CONFIG_CPU_DCACHE_DISABLE)
+ if (cachepolicy > CPOLICY_BUFFERED)
+ cachepolicy = CPOLICY_BUFFERED;
+#elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH)
+ if (cachepolicy > CPOLICY_WRITETHROUGH)
+ cachepolicy = CPOLICY_WRITETHROUGH;
+#endif
+ if (cpu_arch < CPU_ARCH_ARMv5) {
+ if (cachepolicy >= CPOLICY_WRITEALLOC)
+ cachepolicy = CPOLICY_WRITEBACK;
+ ecc_mask = 0;
+ }
+
+ /*
+ * Xscale must not have PMD bit 4 set for section mappings.
+ */
+ if (cpu_is_xscale())
+ for (i = 0; i < ARRAY_SIZE(mem_types); i++)
+ mem_types[i].prot_sect &= ~PMD_BIT4;
/*
- * If we've used up all our ASIDs, we need
- * to start a new version and flush the TLB.
+ * ARMv5 and lower, excluding Xscale, bit 4 must be set for
+ * page tables.
*/
- if ((asid & ~ASID_MASK) == 0)
- flush_tlb_all();
+ if (cpu_arch < CPU_ARCH_ARMv6 && !cpu_is_xscale())
+ for (i = 0; i < ARRAY_SIZE(mem_types); i++)
+ if (mem_types[i].prot_l1)
+ mem_types[i].prot_l1 |= PMD_BIT4;
+
+ cp = &cache_policies[cachepolicy];
+ kern_pgprot = user_pgprot = cp->pte;
+
+ /*
+ * Enable CPU-specific coherency if supported.
+ * (Only available on XSC3 at the moment.)
+ */
+ if (arch_is_coherent()) {
+ if (cpu_is_xsc3()) {
+ mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+ mem_types[MT_MEMORY].prot_pte |= L_PTE_COHERENT;
+ }
+ }
+
+ /*
+ * ARMv6 and above have extended page tables.
+ */
+ if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
+ /*
+ * bit 4 becomes XN which we must clear for the
+ * kernel memory mapping.
+ */
+ mem_types[MT_MEMORY].prot_sect &= ~PMD_SECT_XN;
+ mem_types[MT_ROM].prot_sect &= ~PMD_SECT_XN;
+
+ /*
+ * Mark cache clean areas and XIP ROM read only
+ * from SVC mode and no access from userspace.
+ */
+ mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+ mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+ mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+
+ /*
+ * Mark the device area as "shared device"
+ */
+ mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE;
+ mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
+
+ /*
+ * User pages need to be mapped with the ASID
+ * (iow, non-global)
+ */
+ user_pgprot |= L_PTE_ASID;
+
+#ifdef CONFIG_SMP
+ /*
+ * Mark memory with the "shared" attribute for SMP systems
+ */
+ user_pgprot |= L_PTE_SHARED;
+ kern_pgprot |= L_PTE_SHARED;
+ mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+#endif
+ }
+
+ for (i = 0; i < 16; i++) {
+ unsigned long v = pgprot_val(protection_map[i]);
+ v = (v & ~(L_PTE_BUFFERABLE|L_PTE_CACHEABLE)) | user_pgprot;
+ protection_map[i] = __pgprot(v);
+ }
+
+ mem_types[MT_LOW_VECTORS].prot_pte |= kern_pgprot;
+ mem_types[MT_HIGH_VECTORS].prot_pte |= kern_pgprot;
+
+ if (cpu_arch >= CPU_ARCH_ARMv5) {
+#ifndef CONFIG_SMP
+ /*
+ * Only use write-through for non-SMP systems
+ */
+ mem_types[MT_LOW_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE;
+ mem_types[MT_HIGH_VECTORS].prot_pte &= ~L_PTE_BUFFERABLE;
+#endif
+ } else {
+ mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1);
+ }
+
+ pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
+ L_PTE_DIRTY | L_PTE_WRITE |
+ L_PTE_EXEC | kern_pgprot);
+
+ mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
+ mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
+ mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
+ mem_types[MT_ROM].prot_sect |= cp->pmd;
+
+ switch (cp->pmd) {
+ case PMD_SECT_WT:
+ mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT;
+ break;
+ case PMD_SECT_WB:
+ case PMD_SECT_WBWA:
+ mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB;
+ break;
+ }
+ printk("Memory policy: ECC %sabled, Data cache %s\n",
+ ecc_mask ? "en" : "dis", cp->policy);
+}
+
+#define vectors_base() (vectors_high() ? 0xffff0000 : 0)
+
+/*
+ * Create a SECTION PGD between VIRT and PHYS in domain
+ * DOMAIN with protection PROT. This operates on half-
+ * pgdir entry increments.
+ */
+static inline void
+alloc_init_section(unsigned long virt, unsigned long phys, int prot)
+{
+ pmd_t *pmdp = pmd_off_k(virt);
+
+ if (virt & (1 << 20))
+ pmdp++;
+
+ *pmdp = __pmd(phys | prot);
+ flush_pmd_entry(pmdp);
+}
+
+/*
+ * Create a SUPER SECTION PGD between VIRT and PHYS with protection PROT
+ */
+static inline void
+alloc_init_supersection(unsigned long virt, unsigned long phys, int prot)
+{
+ int i;
+
+ for (i = 0; i < 16; i += 1) {
+ alloc_init_section(virt, phys, prot | PMD_SECT_SUPER);
+
+ virt += (PGDIR_SIZE / 2);
+ }
+}
+
+/*
+ * Add a PAGE mapping between VIRT and PHYS in domain
+ * DOMAIN with protection PROT. Note that due to the
+ * way we map the PTEs, we must allocate two PTE_SIZE'd
+ * blocks - one for the Linux pte table, and one for
+ * the hardware pte table.
+ */
+static inline void
+alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pgprot_t prot)
+{
+ pmd_t *pmdp = pmd_off_k(virt);
+ pte_t *ptep;
+
+ if (pmd_none(*pmdp)) {
+ ptep = alloc_bootmem_low_pages(2 * PTRS_PER_PTE *
+ sizeof(pte_t));
+
+ __pmd_populate(pmdp, __pa(ptep) | prot_l1);
+ }
+ ptep = pte_offset_kernel(pmdp, virt);
+
+ set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot));
+}
+
+/*
+ * Create the page directory entries and any necessary
+ * page tables for the mapping specified by `md'. We
+ * are able to cope here with varying sizes and address
+ * offsets, and we take full advantage of sections and
+ * supersections.
+ */
+void __init create_mapping(struct map_desc *md)
+{
+ unsigned long virt, length;
+ int prot_sect, prot_l1, domain;
+ pgprot_t prot_pte;
+ unsigned long off = (u32)__pfn_to_phys(md->pfn);
+
+ if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
+ printk(KERN_WARNING "BUG: not creating mapping for "
+ "0x%08llx at 0x%08lx in user region\n",
+ __pfn_to_phys((u64)md->pfn), md->virtual);
+ return;
+ }
+
+ if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
+ md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
+ printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx "
+ "overlaps vmalloc space\n",
+ __pfn_to_phys((u64)md->pfn), md->virtual);
+ }
+
+ domain = mem_types[md->type].domain;
+ prot_pte = __pgprot(mem_types[md->type].prot_pte);
+ prot_l1 = mem_types[md->type].prot_l1 | PMD_DOMAIN(domain);
+ prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain);
+
+ /*
+ * Catch 36-bit addresses
+ */
+ if(md->pfn >= 0x100000) {
+ if(domain) {
+ printk(KERN_ERR "MM: invalid domain in supersection "
+ "mapping for 0x%08llx at 0x%08lx\n",
+ __pfn_to_phys((u64)md->pfn), md->virtual);
+ return;
+ }
+ if((md->virtual | md->length | __pfn_to_phys(md->pfn))
+ & ~SUPERSECTION_MASK) {
+ printk(KERN_ERR "MM: cannot create mapping for "
+ "0x%08llx at 0x%08lx invalid alignment\n",
+ __pfn_to_phys((u64)md->pfn), md->virtual);
+ return;
+ }
+
+ /*
+ * Shift bits [35:32] of address into bits [23:20] of PMD
+ * (See ARMv6 spec).
+ */
+ off |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
+ }
+
+ virt = md->virtual;
+ off -= virt;
+ length = md->length;
+
+ if (mem_types[md->type].prot_l1 == 0 &&
+ (virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) {
+ printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
+ "be mapped using pages, ignoring.\n",
+ __pfn_to_phys(md->pfn), md->virtual);
+ return;
+ }
+
+ while ((virt & 0xfffff || (virt + off) & 0xfffff) && length >= PAGE_SIZE) {
+ alloc_init_page(virt, virt + off, prot_l1, prot_pte);
+
+ virt += PAGE_SIZE;
+ length -= PAGE_SIZE;
+ }
+
+ /* N.B. ARMv6 supersections are only defined to work with domain 0.
+ * Since domain assignments can in fact be arbitrary, the
+ * 'domain == 0' check below is required to insure that ARMv6
+ * supersections are only allocated for domain 0 regardless
+ * of the actual domain assignments in use.
+ */
+ if ((cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3())
+ && domain == 0) {
+ /*
+ * Align to supersection boundary if !high pages.
+ * High pages have already been checked for proper
+ * alignment above and they will fail the SUPSERSECTION_MASK
+ * check because of the way the address is encoded into
+ * offset.
+ */
+ if (md->pfn <= 0x100000) {
+ while ((virt & ~SUPERSECTION_MASK ||
+ (virt + off) & ~SUPERSECTION_MASK) &&
+ length >= (PGDIR_SIZE / 2)) {
+ alloc_init_section(virt, virt + off, prot_sect);
+
+ virt += (PGDIR_SIZE / 2);
+ length -= (PGDIR_SIZE / 2);
+ }
+ }
+
+ while (length >= SUPERSECTION_SIZE) {
+ alloc_init_supersection(virt, virt + off, prot_sect);
+
+ virt += SUPERSECTION_SIZE;
+ length -= SUPERSECTION_SIZE;
+ }
+ }
+
+ /*
+ * A section mapping covers half a "pgdir" entry.
+ */
+ while (length >= (PGDIR_SIZE / 2)) {
+ alloc_init_section(virt, virt + off, prot_sect);
+
+ virt += (PGDIR_SIZE / 2);
+ length -= (PGDIR_SIZE / 2);
+ }
+
+ while (length >= PAGE_SIZE) {
+ alloc_init_page(virt, virt + off, prot_l1, prot_pte);
+
+ virt += PAGE_SIZE;
+ length -= PAGE_SIZE;
+ }
+}
+
+/*
+ * Create the architecture specific mappings
+ */
+void __init iotable_init(struct map_desc *io_desc, int nr)
+{
+ int i;
+
+ for (i = 0; i < nr; i++)
+ create_mapping(io_desc + i);
+}
+
+static inline void prepare_page_table(struct meminfo *mi)
+{
+ unsigned long addr;
+
+ /*
+ * Clear out all the mappings below the kernel image.
+ */
+ for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+
+#ifdef CONFIG_XIP_KERNEL
+ /* The XIP kernel is mapped in the module area -- skip over it */
+ addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
+#endif
+ for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+
+ /*
+ * Clear out all the kernel space mappings, except for the first
+ * memory bank, up to the end of the vmalloc region.
+ */
+ for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
+ addr < VMALLOC_END; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+}
+
+/*
+ * Reserve the various regions of node 0
+ */
+void __init reserve_node_zero(pg_data_t *pgdat)
+{
+ unsigned long res_size = 0;
+
+ /*
+ * Register the kernel text and data with bootmem.
+ * Note that this can only be in node 0.
+ */
+#ifdef CONFIG_XIP_KERNEL
+ reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start);
+#else
+ reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext);
+#endif
+
+ /*
+ * Reserve the page tables. These are already in use,
+ * and can only be in node 0.
+ */
+ reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
+ PTRS_PER_PGD * sizeof(pgd_t));
+
+ /*
+ * Hmm... This should go elsewhere, but we really really need to
+ * stop things allocating the low memory; ideally we need a better
+ * implementation of GFP_DMA which does not assume that DMA-able
+ * memory starts at zero.
+ */
+ if (machine_is_integrator() || machine_is_cintegrator())
+ res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
+
+ /*
+ * These should likewise go elsewhere. They pre-reserve the
+ * screen memory region at the start of main system memory.
+ */
+ if (machine_is_edb7211())
+ res_size = 0x00020000;
+ if (machine_is_p720t())
+ res_size = 0x00014000;
+
+#ifdef CONFIG_SA1111
+ /*
+ * Because of the SA1111 DMA bug, we want to preserve our
+ * precious DMA-able memory...
+ */
+ res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
+#endif
+ if (res_size)
+ reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size);
+}
+
+/*
+ * Set up device the mappings. Since we clear out the page tables for all
+ * mappings above VMALLOC_END, we will remove any debug device mappings.
+ * This means you have to be careful how you debug this function, or any
+ * called function. This means you can't use any function or debugging
+ * method which may touch any device, otherwise the kernel _will_ crash.
+ */
+static void __init devicemaps_init(struct machine_desc *mdesc)
+{
+ struct map_desc map;
+ unsigned long addr;
+ void *vectors;
+
+ /*
+ * Allocate the vector page early.
+ */
+ vectors = alloc_bootmem_low_pages(PAGE_SIZE);
+ BUG_ON(!vectors);
+
+ for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+
+ /*
+ * Map the kernel if it is XIP.
+ * It is always first in the modulearea.
+ */
+#ifdef CONFIG_XIP_KERNEL
+ map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
+ map.virtual = MODULE_START;
+ map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
+ map.type = MT_ROM;
+ create_mapping(&map);
+#endif
+
+ /*
+ * Map the cache flushing regions.
+ */
+#ifdef FLUSH_BASE
+ map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
+ map.virtual = FLUSH_BASE;
+ map.length = SZ_1M;
+ map.type = MT_CACHECLEAN;
+ create_mapping(&map);
+#endif
+#ifdef FLUSH_BASE_MINICACHE
+ map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M);
+ map.virtual = FLUSH_BASE_MINICACHE;
+ map.length = SZ_1M;
+ map.type = MT_MINICLEAN;
+ create_mapping(&map);
+#endif
+
+ /*
+ * Create a mapping for the machine vectors at the high-vectors
+ * location (0xffff0000). If we aren't using high-vectors, also
+ * create a mapping at the low-vectors virtual address.
+ */
+ map.pfn = __phys_to_pfn(virt_to_phys(vectors));
+ map.virtual = 0xffff0000;
+ map.length = PAGE_SIZE;
+ map.type = MT_HIGH_VECTORS;
+ create_mapping(&map);
+
+ if (!vectors_high()) {
+ map.virtual = 0;
+ map.type = MT_LOW_VECTORS;
+ create_mapping(&map);
+ }
+
+ /*
+ * Ask the machine support to map in the statically mapped devices.
+ */
+ if (mdesc->map_io)
+ mdesc->map_io();
+
+ /*
+ * Finally flush the caches and tlb to ensure that we're in a
+ * consistent state wrt the writebuffer. This also ensures that
+ * any write-allocated cache lines in the vector page are written
+ * back. After this point, we can start to touch devices again.
+ */
+ local_flush_tlb_all();
+ flush_cache_all();
+}
+
+/*
+ * paging_init() sets up the page tables, initialises the zone memory
+ * maps, and sets up the zero page, bad page and bad page tables.
+ */
+void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
+{
+ void *zero_page;
+
+ build_mem_type_table();
+ prepare_page_table(mi);
+ bootmem_init(mi);
+ devicemaps_init(mdesc);
+
+ top_pmd = pmd_off_k(0xffff0000);
+
+ /*
+ * allocate the zero page. Note that we count on this going ok.
+ */
+ zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
+ memzero(zero_page, PAGE_SIZE);
+ empty_zero_page = virt_to_page(zero_page);
+ flush_dcache_page(empty_zero_page);
+}
+
+/*
+ * In order to soft-boot, we need to insert a 1:1 mapping in place of
+ * the user-mode pages. This will then ensure that we have predictable
+ * results when turning the mmu off
+ */
+void setup_mm_for_reboot(char mode)
+{
+ unsigned long base_pmdval;
+ pgd_t *pgd;
+ int i;
+
+ if (current->mm && current->mm->pgd)
+ pgd = current->mm->pgd;
+ else
+ pgd = init_mm.pgd;
+
+ base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
+ if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
+ base_pmdval |= PMD_BIT4;
+
+ for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
+ unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval;
+ pmd_t *pmd;
- mm->context.id = asid;
+ pmd = pmd_off(pgd, i << PGDIR_SHIFT);
+ pmd[0] = __pmd(pmdval);
+ pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
+ flush_pmd_entry(pmd);
+ }
}
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 1464ed817b5..d0e66424a59 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -11,6 +11,49 @@
#include <asm/io.h>
#include <asm/page.h>
+#include "mm.h"
+
+extern void _stext, __data_start, _end;
+
+/*
+ * Reserve the various regions of node 0
+ */
+void __init reserve_node_zero(pg_data_t *pgdat)
+{
+ /*
+ * Register the kernel text and data with bootmem.
+ * Note that this can only be in node 0.
+ */
+#ifdef CONFIG_XIP_KERNEL
+ reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start);
+#else
+ reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext);
+#endif
+
+ /*
+ * Register the exception vector page.
+ * some architectures which the DRAM is the exception vector to trap,
+ * alloc_page breaks with error, although it is not NULL, but "0."
+ */
+ reserve_bootmem_node(pgdat, CONFIG_VECTORS_BASE, PAGE_SIZE);
+}
+
+/*
+ * paging_init() sets up the page tables, initialises the zone memory
+ * maps, and sets up the zero page, bad page and bad page tables.
+ */
+void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
+{
+ bootmem_init(mi);
+}
+
+/*
+ * We don't need to do anything here for nommu machines.
+ */
+void setup_mm_for_reboot(char mode)
+{
+}
+
void flush_dcache_page(struct page *page)
{
__cpuc_flush_dcache_page(page_address(page));
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
new file mode 100644
index 00000000000..20c1b0df75f
--- /dev/null
+++ b/arch/arm/mm/pgd.c
@@ -0,0 +1,101 @@
+/*
+ * linux/arch/arm/mm/pgd.c
+ *
+ * Copyright (C) 1998-2005 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/mm.h>
+#include <linux/highmem.h>
+
+#include <asm/pgalloc.h>
+#include <asm/page.h>
+#include <asm/tlbflush.h>
+
+#include "mm.h"
+
+#define FIRST_KERNEL_PGD_NR (FIRST_USER_PGD_NR + USER_PTRS_PER_PGD)
+
+/*
+ * need to get a 16k page for level 1
+ */
+pgd_t *get_pgd_slow(struct mm_struct *mm)
+{
+ pgd_t *new_pgd, *init_pgd;
+ pmd_t *new_pmd, *init_pmd;
+ pte_t *new_pte, *init_pte;
+
+ new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 2);
+ if (!new_pgd)
+ goto no_pgd;
+
+ memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t));
+
+ /*
+ * Copy over the kernel and IO PGD entries
+ */
+ init_pgd = pgd_offset_k(0);
+ memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
+ (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
+
+ clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
+
+ if (!vectors_high()) {
+ /*
+ * On ARM, first page must always be allocated since it
+ * contains the machine vectors.
+ */
+ new_pmd = pmd_alloc(mm, new_pgd, 0);
+ if (!new_pmd)
+ goto no_pmd;
+
+ new_pte = pte_alloc_map(mm, new_pmd, 0);
+ if (!new_pte)
+ goto no_pte;
+
+ init_pmd = pmd_offset(init_pgd, 0);
+ init_pte = pte_offset_map_nested(init_pmd, 0);
+ set_pte(new_pte, *init_pte);
+ pte_unmap_nested(init_pte);
+ pte_unmap(new_pte);
+ }
+
+ return new_pgd;
+
+no_pte:
+ pmd_free(new_pmd);
+no_pmd:
+ free_pages((unsigned long)new_pgd, 2);
+no_pgd:
+ return NULL;
+}
+
+void free_pgd_slow(pgd_t *pgd)
+{
+ pmd_t *pmd;
+ struct page *pte;
+
+ if (!pgd)
+ return;
+
+ /* pgd is always present and good */
+ pmd = pmd_off(pgd, 0);
+ if (pmd_none(*pmd))
+ goto free;
+ if (pmd_bad(*pmd)) {
+ pmd_ERROR(*pmd);
+ pmd_clear(pmd);
+ goto free;
+ }
+
+ pte = pmd_page(*pmd);
+ pmd_clear(pmd);
+ dec_zone_page_state(virt_to_page((unsigned long *)pgd), NR_PAGETABLE);
+ pte_lock_deinit(pte);
+ pte_free(pte);
+ pmd_free(pmd);
+free:
+ free_pages((unsigned long) pgd, 2);
+}
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
new file mode 100644
index 00000000000..40713818a87
--- /dev/null
+++ b/arch/arm/mm/proc-arm740.S
@@ -0,0 +1,174 @@
+/*
+ * linux/arch/arm/mm/arm740.S: utility functions for ARM740
+ *
+ * Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+
+ .text
+/*
+ * cpu_arm740_proc_init()
+ * cpu_arm740_do_idle()
+ * cpu_arm740_dcache_clean_area()
+ * cpu_arm740_switch_mm()
+ *
+ * These are not required.
+ */
+ENTRY(cpu_arm740_proc_init)
+ENTRY(cpu_arm740_do_idle)
+ENTRY(cpu_arm740_dcache_clean_area)
+ENTRY(cpu_arm740_switch_mm)
+ mov pc, lr
+
+/*
+ * cpu_arm740_proc_fin()
+ */
+ENTRY(cpu_arm740_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ mrc p15, 0, r0, c1, c0, 0
+ bic r0, r0, #0x3f000000 @ bank/f/lock/s
+ bic r0, r0, #0x0000000c @ w-buffer/cache
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ mcr p15, 0, r0, c7, c0, 0 @ invalidate cache
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_arm740_reset(loc)
+ * Params : r0 = address to jump to
+ * Notes : This sets up everything for a reset
+ */
+ENTRY(cpu_arm740_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c0, 0 @ invalidate cache
+ mrc p15, 0, ip, c1, c0, 0 @ get ctrl register
+ bic ip, ip, #0x0000000c @ ............wc..
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+ __INIT
+
+ .type __arm740_setup, #function
+__arm740_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c0, 0 @ invalidate caches
+
+ mcr p15, 0, r0, c6, c3 @ disable area 3~7
+ mcr p15, 0, r0, c6, c4
+ mcr p15, 0, r0, c6, c5
+ mcr p15, 0, r0, c6, c6
+ mcr p15, 0, r0, c6, c7
+
+ mov r0, #0x0000003F @ base = 0, size = 4GB
+ mcr p15, 0, r0, c6, c0 @ set area 0, default
+
+ ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
+ ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
+ mov r2, #10 @ 11 is the minimum (4KB)
+1: add r2, r2, #1 @ area size *= 2
+ mov r1, r1, lsr #1
+ bne 1b @ count not zero r-shift
+ orr r0, r0, r2, lsl #1 @ the area register value
+ orr r0, r0, #1 @ set enable bit
+ mcr p15, 0, r0, c6, c1 @ set area 1, RAM
+
+ ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
+ ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
+ mov r2, #10 @ 11 is the minimum (4KB)
+1: add r2, r2, #1 @ area size *= 2
+ mov r1, r1, lsr #1
+ bne 1b @ count not zero r-shift
+ orr r0, r0, r2, lsl #1 @ the area register value
+ orr r0, r0, #1 @ set enable bit
+ mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH
+
+ mov r0, #0x06
+ mcr p15, 0, r0, c2, c0 @ Region 1&2 cacheable
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mov r0, #0x00 @ disable whole write buffer
+#else
+ mov r0, #0x02 @ Region 1 write bufferred
+#endif
+ mcr p15, 0, r0, c3, c0
+
+ mov r0, #0x10000
+ sub r0, r0, #1 @ r0 = 0xffff
+ mcr p15, 0, r0, c5, c0 @ all read/write access
+
+ mrc p15, 0, r0, c1, c0 @ get control register
+ bic r0, r0, #0x3F000000 @ set to standard caching mode
+ @ need some benchmark
+ orr r0, r0, #0x0000000d @ MPU/Cache/WB
+
+ mov pc, lr
+
+ .size __arm740_setup, . - __arm740_setup
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm740_processor_functions, #object
+ENTRY(arm740_processor_functions)
+ .word v4t_late_abort
+ .word cpu_arm740_proc_init
+ .word cpu_arm740_proc_fin
+ .word cpu_arm740_reset
+ .word cpu_arm740_do_idle
+ .word cpu_arm740_dcache_clean_area
+ .word cpu_arm740_switch_mm
+ .word 0 @ cpu_*_set_pte
+ .size arm740_processor_functions, . - arm740_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv4"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v4"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_arm740_name, #object
+cpu_arm740_name:
+ .ascii "ARM740T"
+ .size cpu_arm740_name, . - cpu_arm740_name
+
+ .align
+
+ .section ".proc.info.init", #alloc, #execinstr
+ .type __arm740_proc_info,#object
+__arm740_proc_info:
+ .long 0x41807400
+ .long 0xfffffff0
+ .long 0
+ b __arm740_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT
+ .long cpu_arm740_name
+ .long arm740_processor_functions
+ .long 0
+ .long 0
+ .long v3_cache_fns @ cache model
+ .size __arm740_proc_info, . - __arm740_proc_info
+
+
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
new file mode 100644
index 00000000000..22d7e3100ea
--- /dev/null
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -0,0 +1,249 @@
+/*
+ * linux/arch/arm/mm/proc-arm7tdmi.S: utility functions for ARM7TDMI
+ *
+ * Copyright (C) 2003-2006 Hyok S. Choi <hyok.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+
+ .text
+/*
+ * cpu_arm7tdmi_proc_init()
+ * cpu_arm7tdmi_do_idle()
+ * cpu_arm7tdmi_dcache_clean_area()
+ * cpu_arm7tdmi_switch_mm()
+ *
+ * These are not required.
+ */
+ENTRY(cpu_arm7tdmi_proc_init)
+ENTRY(cpu_arm7tdmi_do_idle)
+ENTRY(cpu_arm7tdmi_dcache_clean_area)
+ENTRY(cpu_arm7tdmi_switch_mm)
+ mov pc, lr
+
+/*
+ * cpu_arm7tdmi_proc_fin()
+ */
+ENTRY(cpu_arm7tdmi_proc_fin)
+ mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, r0
+ mov pc, lr
+
+/*
+ * Function: cpu_arm7tdmi_reset(loc)
+ * Params : loc(r0) address to jump to
+ * Purpose : Sets up everything for a reset and jump to the location for soft reset.
+ */
+ENTRY(cpu_arm7tdmi_reset)
+ mov pc, r0
+
+ __INIT
+
+ .type __arm7tdmi_setup, #function
+__arm7tdmi_setup:
+ mov pc, lr
+ .size __arm7tdmi_setup, . - __arm7tdmi_setup
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm7tdmi_processor_functions, #object
+ENTRY(arm7tdmi_processor_functions)
+ .word v4t_late_abort
+ .word cpu_arm7tdmi_proc_init
+ .word cpu_arm7tdmi_proc_fin
+ .word cpu_arm7tdmi_reset
+ .word cpu_arm7tdmi_do_idle
+ .word cpu_arm7tdmi_dcache_clean_area
+ .word cpu_arm7tdmi_switch_mm
+ .word 0 @ cpu_*_set_pte
+ .size arm7tdmi_processor_functions, . - arm7tdmi_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv4t"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v4"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_arm7tdmi_name, #object
+cpu_arm7tdmi_name:
+ .asciz "ARM7TDMI"
+ .size cpu_arm7tdmi_name, . - cpu_arm7tdmi_name
+
+ .type cpu_triscenda7_name, #object
+cpu_triscenda7_name:
+ .asciz "Triscend-A7x"
+ .size cpu_triscenda7_name, . - cpu_triscenda7_name
+
+ .type cpu_at91_name, #object
+cpu_at91_name:
+ .asciz "Atmel-AT91M40xxx"
+ .size cpu_at91_name, . - cpu_at91_name
+
+ .type cpu_s3c3410_name, #object
+cpu_s3c3410_name:
+ .asciz "Samsung-S3C3410"
+ .size cpu_s3c3410_name, . - cpu_s3c3410_name
+
+ .type cpu_s3c44b0x_name, #object
+cpu_s3c44b0x_name:
+ .asciz "Samsung-S3C44B0x"
+ .size cpu_s3c44b0x_name, . - cpu_s3c44b0x_name
+
+ .type cpu_s3c4510b, #object
+cpu_s3c4510b_name:
+ .asciz "Samsung-S3C4510B"
+ .size cpu_s3c4510b_name, . - cpu_s3c4510b_name
+
+ .type cpu_s3c4530_name, #object
+cpu_s3c4530_name:
+ .asciz "Samsung-S3C4530"
+ .size cpu_s3c4530_name, . - cpu_s3c4530_name
+
+ .type cpu_netarm_name, #object
+cpu_netarm_name:
+ .asciz "NETARM"
+ .size cpu_netarm_name, . - cpu_netarm_name
+
+ .align
+
+ .section ".proc.info.init", #alloc, #execinstr
+
+ .type __arm7tdmi_proc_info, #object
+__arm7tdmi_proc_info:
+ .long 0x41007700
+ .long 0xfff8ff00
+ .long 0
+ .long 0
+ b __arm7tdmi_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_26BIT
+ .long cpu_arm7tdmi_name
+ .long arm7tdmi_processor_functions
+ .long 0
+ .long 0
+ .long v4_cache_fns
+ .size __arm7tdmi_proc_info, . - __arm7dmi_proc_info
+
+ .type __triscenda7_proc_info, #object
+__triscenda7_proc_info:
+ .long 0x0001d2ff
+ .long 0x0001ffff
+ .long 0
+ .long 0
+ b __arm7tdmi_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
+ .long cpu_triscenda7_name
+ .long arm7tdmi_processor_functions
+ .long 0
+ .long 0
+ .long v4_cache_fns
+ .size __triscenda7_proc_info, . - __triscenda7_proc_info
+
+ .type __at91_proc_info, #object
+__at91_proc_info:
+ .long 0x14000040
+ .long 0xfff000e0
+ .long 0
+ .long 0
+ b __arm7tdmi_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
+ .long cpu_at91_name
+ .long arm7tdmi_processor_functions
+ .long 0
+ .long 0
+ .long v4_cache_fns
+ .size __at91_proc_info, . - __at91_proc_info
+
+ .type __s3c4510b_proc_info, #object
+__s3c4510b_proc_info:
+ .long 0x36365000
+ .long 0xfffff000
+ .long 0
+ .long 0
+ b __arm7tdmi_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
+ .long cpu_s3c4510b_name
+ .long arm7tdmi_processor_functions
+ .long 0
+ .long 0
+ .long v4_cache_fns
+ .size __s3c4510b_proc_info, . - __s3c4510b_proc_info
+
+ .type __s3c4530_proc_info, #object
+__s3c4530_proc_info:
+ .long 0x4c000000
+ .long 0xfff000e0
+ .long 0
+ .long 0
+ b __arm7tdmi_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
+ .long cpu_s3c4530_name
+ .long arm7tdmi_processor_functions
+ .long 0
+ .long 0
+ .long v4_cache_fns
+ .size __s3c4530_proc_info, . - __s3c4530_proc_info
+
+ .type __s3c3410_proc_info, #object
+__s3c3410_proc_info:
+ .long 0x34100000
+ .long 0xffff0000
+ .long 0
+ .long 0
+ b __arm7tdmi_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
+ .long cpu_s3c3410_name
+ .long arm7tdmi_processor_functions
+ .long 0
+ .long 0
+ .long v4_cache_fns
+ .size __s3c3410_proc_info, . - __s3c3410_proc_info
+
+ .type __s3c44b0x_proc_info, #object
+__s3c44b0x_proc_info:
+ .long 0x44b00000
+ .long 0xffff0000
+ .long 0
+ .long 0
+ b __arm7tdmi_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
+ .long cpu_s3c44b0x_name
+ .long arm7tdmi_processor_functions
+ .long 0
+ .long 0
+ .long v4_cache_fns
+ .size __s3c44b0x_proc_info, . - __s3c44b0x_proc_info
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
new file mode 100644
index 00000000000..2397f4b6e15
--- /dev/null
+++ b/arch/arm/mm/proc-arm940.S
@@ -0,0 +1,369 @@
+/*
+ * linux/arch/arm/mm/arm940.S: utility functions for ARM940T
+ *
+ * Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+
+/* ARM940T has a 4KB DCache comprising 256 lines of 4 words */
+#define CACHE_DLINESIZE 16
+#define CACHE_DSEGMENTS 4
+#define CACHE_DENTRIES 64
+
+ .text
+/*
+ * cpu_arm940_proc_init()
+ * cpu_arm940_switch_mm()
+ *
+ * These are not required.
+ */
+ENTRY(cpu_arm940_proc_init)
+ENTRY(cpu_arm940_switch_mm)
+ mov pc, lr
+
+/*
+ * cpu_arm940_proc_fin()
+ */
+ENTRY(cpu_arm940_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl arm940_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x00001000 @ i-cache
+ bic r0, r0, #0x00000004 @ d-cache
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_arm940_reset(loc)
+ * Params : r0 = address to jump to
+ * Notes : This sets up everything for a reset
+ */
+ENTRY(cpu_arm940_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c5, 0 @ flush I cache
+ mcr p15, 0, ip, c7, c6, 0 @ flush D cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x00000005 @ .............c.p
+ bic ip, ip, #0x00001000 @ i-cache
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_arm940_do_idle()
+ */
+ .align 5
+ENTRY(cpu_arm940_do_idle)
+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
+ mov pc, lr
+
+/*
+ * flush_user_cache_all()
+ */
+ENTRY(arm940_flush_user_cache_all)
+ /* FALLTHROUGH */
+
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(arm940_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ /* FALLTHROUGH */
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * There is no efficient way to flush a range of cache entries
+ * in the specified address range. Thus, flushes all.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags describing address space
+ */
+ENTRY(arm940_flush_user_cache_range)
+ mov ip, #0
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, ip, c7, c6, 0 @ flush D cache
+#else
+ mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 4
+ bcs 1b @ segments 3 to 0
+#endif
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm940_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm940_coherent_user_range)
+ /* FALLTHROUGH */
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ */
+ENTRY(arm940_flush_kern_dcache_page)
+ mov ip, #0
+ mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 4
+ bcs 1b @ segments 7 to 0
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * There is no efficient way to invalidate a specifid virtual
+ * address range. Thus, invalidates all.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm940_dma_inv_range)
+ mov ip, #0
+ mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c6, 2 @ flush D entry
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 4
+ bcs 1b @ segments 7 to 0
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * There is no efficient way to clean a specifid virtual
+ * address range. Thus, cleans all.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm940_dma_clean_range)
+ENTRY(cpu_arm940_dcache_clean_area)
+ mov ip, #0
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2: mcr p15, 0, r3, c7, c10, 2 @ clean D entry
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 4
+ bcs 1b @ segments 7 to 0
+#endif
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * There is no efficient way to clean and invalidate a specifid
+ * virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm940_dma_flush_range)
+ mov ip, #0
+ mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
+2:
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, r3, c7, c14, 2 @ clean/flush D entry
+#else
+ mcr p15, 0, r3, c7, c10, 2 @ clean D entry
+#endif
+ subs r3, r3, #1 << 26
+ bcs 2b @ entries 63 to 0
+ subs r1, r1, #1 << 4
+ bcs 1b @ segments 7 to 0
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ENTRY(arm940_cache_fns)
+ .long arm940_flush_kern_cache_all
+ .long arm940_flush_user_cache_all
+ .long arm940_flush_user_cache_range
+ .long arm940_coherent_kern_range
+ .long arm940_coherent_user_range
+ .long arm940_flush_kern_dcache_page
+ .long arm940_dma_inv_range
+ .long arm940_dma_clean_range
+ .long arm940_dma_flush_range
+
+ __INIT
+
+ .type __arm940_setup, #function
+__arm940_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c6, 0 @ invalidate D cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+
+ mcr p15, 0, r0, c6, c3, 0 @ disable data area 3~7
+ mcr p15, 0, r0, c6, c4, 0
+ mcr p15, 0, r0, c6, c5, 0
+ mcr p15, 0, r0, c6, c6, 0
+ mcr p15, 0, r0, c6, c7, 0
+
+ mcr p15, 0, r0, c6, c3, 1 @ disable instruction area 3~7
+ mcr p15, 0, r0, c6, c4, 1
+ mcr p15, 0, r0, c6, c5, 1
+ mcr p15, 0, r0, c6, c6, 1
+ mcr p15, 0, r0, c6, c7, 1
+
+ mov r0, #0x0000003F @ base = 0, size = 4GB
+ mcr p15, 0, r0, c6, c0, 0 @ set area 0, default
+ mcr p15, 0, r0, c6, c0, 1
+
+ ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
+ ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
+ mov r2, #10 @ 11 is the minimum (4KB)
+1: add r2, r2, #1 @ area size *= 2
+ mov r1, r1, lsr #1
+ bne 1b @ count not zero r-shift
+ orr r0, r0, r2, lsl #1 @ the area register value
+ orr r0, r0, #1 @ set enable bit
+ mcr p15, 0, r0, c6, c1, 0 @ set area 1, RAM
+ mcr p15, 0, r0, c6, c1, 1
+
+ ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
+ ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
+ mov r2, #10 @ 11 is the minimum (4KB)
+1: add r2, r2, #1 @ area size *= 2
+ mov r1, r1, lsr #1
+ bne 1b @ count not zero r-shift
+ orr r0, r0, r2, lsl #1 @ the area register value
+ orr r0, r0, #1 @ set enable bit
+ mcr p15, 0, r0, c6, c2, 0 @ set area 2, ROM/FLASH
+ mcr p15, 0, r0, c6, c2, 1
+
+ mov r0, #0x06
+ mcr p15, 0, r0, c2, c0, 0 @ Region 1&2 cacheable
+ mcr p15, 0, r0, c2, c0, 1
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mov r0, #0x00 @ disable whole write buffer
+#else
+ mov r0, #0x02 @ Region 1 write bufferred
+#endif
+ mcr p15, 0, r0, c3, c0, 0
+
+ mov r0, #0x10000
+ sub r0, r0, #1 @ r0 = 0xffff
+ mcr p15, 0, r0, c5, c0, 0 @ all read/write access
+ mcr p15, 0, r0, c5, c0, 1
+
+ mrc p15, 0, r0, c1, c0 @ get control register
+ orr r0, r0, #0x00001000 @ I-cache
+ orr r0, r0, #0x00000005 @ MPU/D-cache
+
+ mov pc, lr
+
+ .size __arm940_setup, . - __arm940_setup
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm940_processor_functions, #object
+ENTRY(arm940_processor_functions)
+ .word nommu_early_abort
+ .word cpu_arm940_proc_init
+ .word cpu_arm940_proc_fin
+ .word cpu_arm940_reset
+ .word cpu_arm940_do_idle
+ .word cpu_arm940_dcache_clean_area
+ .word cpu_arm940_switch_mm
+ .word 0 @ cpu_*_set_pte
+ .size arm940_processor_functions, . - arm940_processor_functions
+
+ .section ".rodata"
+
+.type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv4t"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v4"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_arm940_name, #object
+cpu_arm940_name:
+ .ascii "ARM940T"
+ .size cpu_arm940_name, . - cpu_arm940_name
+
+ .align
+
+ .section ".proc.info.init", #alloc, #execinstr
+
+ .type __arm940_proc_info,#object
+__arm940_proc_info:
+ .long 0x41009400
+ .long 0xff00fff0
+ .long 0
+ b __arm940_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
+ .long cpu_arm940_name
+ .long arm940_processor_functions
+ .long 0
+ .long 0
+ .long arm940_cache_fns
+ .size __arm940_proc_info, . - __arm940_proc_info
+
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
new file mode 100644
index 00000000000..e1861756442
--- /dev/null
+++ b/arch/arm/mm/proc-arm946.S
@@ -0,0 +1,424 @@
+/*
+ * linux/arch/arm/mm/arm946.S: utility functions for ARM946E-S
+ *
+ * Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
+ *
+ * (Many of cache codes are from proc-arm926.S)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+
+/*
+ * ARM946E-S is synthesizable to have 0KB to 1MB sized D-Cache,
+ * comprising 256 lines of 32 bytes (8 words).
+ */
+#define CACHE_DSIZE (CONFIG_CPU_DCACHE_SIZE) /* typically 8KB. */
+#define CACHE_DLINESIZE 32 /* fixed */
+#define CACHE_DSEGMENTS 4 /* fixed */
+#define CACHE_DENTRIES (CACHE_DSIZE / CACHE_DSEGMENTS / CACHE_DLINESIZE)
+#define CACHE_DLIMIT (CACHE_DSIZE * 4) /* benchmark needed */
+
+ .text
+/*
+ * cpu_arm946_proc_init()
+ * cpu_arm946_switch_mm()
+ *
+ * These are not required.
+ */
+ENTRY(cpu_arm946_proc_init)
+ENTRY(cpu_arm946_switch_mm)
+ mov pc, lr
+
+/*
+ * cpu_arm946_proc_fin()
+ */
+ENTRY(cpu_arm946_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl arm946_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x00001000 @ i-cache
+ bic r0, r0, #0x00000004 @ d-cache
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_arm946_reset(loc)
+ * Params : r0 = address to jump to
+ * Notes : This sets up everything for a reset
+ */
+ENTRY(cpu_arm946_reset)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c5, 0 @ flush I cache
+ mcr p15, 0, ip, c7, c6, 0 @ flush D cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x00000005 @ .............c.p
+ bic ip, ip, #0x00001000 @ i-cache
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ mov pc, r0
+
+/*
+ * cpu_arm946_do_idle()
+ */
+ .align 5
+ENTRY(cpu_arm946_do_idle)
+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
+ mov pc, lr
+
+/*
+ * flush_user_cache_all()
+ */
+ENTRY(arm946_flush_user_cache_all)
+ /* FALLTHROUGH */
+
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(arm946_flush_kern_cache_all)
+ mov r2, #VM_EXEC
+ mov ip, #0
+__flush_whole_cache:
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, ip, c7, c6, 0 @ flush D cache
+#else
+ mov r1, #(CACHE_DSEGMENTS - 1) << 29 @ 4 segments
+1: orr r3, r1, #(CACHE_DENTRIES - 1) << 4 @ n entries
+2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index
+ subs r3, r3, #1 << 4
+ bcs 2b @ entries n to 0
+ subs r1, r1, #1 << 29
+ bcs 1b @ segments 3 to 0
+#endif
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 0 @ flush I cache
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Clean and invalidate a range of cache entries in the
+ * specified address range.
+ *
+ * - start - start address (inclusive)
+ * - end - end address (exclusive)
+ * - flags - vm_flags describing address space
+ * (same as arm926)
+ */
+ENTRY(arm946_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT
+ bhs __flush_whole_cache
+
+1: tst r2, #VM_EXEC
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+#else
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+#endif
+ cmp r0, r1
+ blo 1b
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(arm946_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start, end. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ * (same as arm926)
+ */
+ENTRY(arm946_coherent_user_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(void *page)
+ *
+ * Ensure no D cache aliasing occurs, either with itself or
+ * the I cache
+ *
+ * - addr - page aligned address
+ * (same as arm926)
+ */
+ENTRY(arm946_flush_kern_dcache_page)
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ * (same as arm926)
+ */
+ENTRY(arm946_dma_inv_range)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ tst r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
+#endif
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as arm926)
+ */
+ENTRY(arm946_dma_clean_range)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+#endif
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/*
+ * dma_flush_range(start, end)
+ *
+ * Clean and invalidate the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ *
+ * (same as arm926)
+ */
+ENTRY(arm946_dma_flush_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1:
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
+#else
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+#endif
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ENTRY(arm946_cache_fns)
+ .long arm946_flush_kern_cache_all
+ .long arm946_flush_user_cache_all
+ .long arm946_flush_user_cache_range
+ .long arm946_coherent_kern_range
+ .long arm946_coherent_user_range
+ .long arm946_flush_kern_dcache_page
+ .long arm946_dma_inv_range
+ .long arm946_dma_clean_range
+ .long arm946_dma_flush_range
+
+
+ENTRY(cpu_arm946_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+#endif
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+ __INIT
+
+ .type __arm946_setup, #function
+__arm946_setup:
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c6, 0 @ invalidate D cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+
+ mcr p15, 0, r0, c6, c3, 0 @ disable memory region 3~7
+ mcr p15, 0, r0, c6, c4, 0
+ mcr p15, 0, r0, c6, c5, 0
+ mcr p15, 0, r0, c6, c6, 0
+ mcr p15, 0, r0, c6, c7, 0
+
+ mov r0, #0x0000003F @ base = 0, size = 4GB
+ mcr p15, 0, r0, c6, c0, 0 @ set region 0, default
+
+ ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
+ ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
+ mov r2, #10 @ 11 is the minimum (4KB)
+1: add r2, r2, #1 @ area size *= 2
+ mov r1, r1, lsr #1
+ bne 1b @ count not zero r-shift
+ orr r0, r0, r2, lsl #1 @ the region register value
+ orr r0, r0, #1 @ set enable bit
+ mcr p15, 0, r0, c6, c1, 0 @ set region 1, RAM
+
+ ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
+ ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
+ mov r2, #10 @ 11 is the minimum (4KB)
+1: add r2, r2, #1 @ area size *= 2
+ mov r1, r1, lsr #1
+ bne 1b @ count not zero r-shift
+ orr r0, r0, r2, lsl #1 @ the region register value
+ orr r0, r0, #1 @ set enable bit
+ mcr p15, 0, r0, c6, c2, 0 @ set region 2, ROM/FLASH
+
+ mov r0, #0x06
+ mcr p15, 0, r0, c2, c0, 0 @ region 1,2 d-cacheable
+ mcr p15, 0, r0, c2, c0, 1 @ region 1,2 i-cacheable
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mov r0, #0x00 @ disable whole write buffer
+#else
+ mov r0, #0x02 @ region 1 write bufferred
+#endif
+ mcr p15, 0, r0, c3, c0, 0
+
+/*
+ * Access Permission Settings for future permission control by PU.
+ *
+ * priv. user
+ * region 0 (whole) rw -- : b0001
+ * region 1 (RAM) rw rw : b0011
+ * region 2 (FLASH) rw r- : b0010
+ * region 3~7 (none) -- -- : b0000
+ */
+ mov r0, #0x00000031
+ orr r0, r0, #0x00000200
+ mcr p15, 0, r0, c5, c0, 2 @ set data access permission
+ mcr p15, 0, r0, c5, c0, 3 @ set inst. access permission
+
+ mrc p15, 0, r0, c1, c0 @ get control register
+ orr r0, r0, #0x00001000 @ I-cache
+ orr r0, r0, #0x00000005 @ MPU/D-cache
+#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
+ orr r0, r0, #0x00004000 @ .1.. .... .... ....
+#endif
+ mov pc, lr
+
+ .size __arm946_setup, . - __arm946_setup
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm946_processor_functions, #object
+ENTRY(arm946_processor_functions)
+ .word nommu_early_abort
+ .word cpu_arm946_proc_init
+ .word cpu_arm946_proc_fin
+ .word cpu_arm946_reset
+ .word cpu_arm946_do_idle
+
+ .word cpu_arm946_dcache_clean_area
+ .word cpu_arm946_switch_mm
+ .word 0 @ cpu_*_set_pte
+ .size arm946_processor_functions, . - arm946_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv5te"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v5t"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_arm946_name, #object
+cpu_arm946_name:
+ .ascii "ARM946E-S"
+ .size cpu_arm946_name, . - cpu_arm946_name
+
+ .align
+
+ .section ".proc.info.init", #alloc, #execinstr
+ .type __arm946_proc_info,#object
+__arm946_proc_info:
+ .long 0x41009460
+ .long 0xff00fff0
+ .long 0
+ b __arm946_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
+ .long cpu_arm946_name
+ .long arm946_processor_functions
+ .long 0
+ .long 0
+ .long arm940_cache_fns
+ .size __arm946_proc_info, . - __arm946_proc_info
+
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
new file mode 100644
index 00000000000..918ebf65d4f
--- /dev/null
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -0,0 +1,134 @@
+/*
+ * linux/arch/arm/mm/proc-arm9tdmi.S: utility functions for ARM9TDMI
+ *
+ * Copyright (C) 2003-2006 Hyok S. Choi <hyok.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+
+ .text
+/*
+ * cpu_arm9tdmi_proc_init()
+ * cpu_arm9tdmi_do_idle()
+ * cpu_arm9tdmi_dcache_clean_area()
+ * cpu_arm9tdmi_switch_mm()
+ *
+ * These are not required.
+ */
+ENTRY(cpu_arm9tdmi_proc_init)
+ENTRY(cpu_arm9tdmi_do_idle)
+ENTRY(cpu_arm9tdmi_dcache_clean_area)
+ENTRY(cpu_arm9tdmi_switch_mm)
+ mov pc, lr
+
+/*
+ * cpu_arm9tdmi_proc_fin()
+ */
+ENTRY(cpu_arm9tdmi_proc_fin)
+ mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, r0
+ mov pc, lr
+
+/*
+ * Function: cpu_arm9tdmi_reset(loc)
+ * Params : loc(r0) address to jump to
+ * Purpose : Sets up everything for a reset and jump to the location for soft reset.
+ */
+ENTRY(cpu_arm9tdmi_reset)
+ mov pc, r0
+
+ __INIT
+
+ .type __arm9tdmi_setup, #function
+__arm9tdmi_setup:
+ mov pc, lr
+ .size __arm9tdmi_setup, . - __arm9tdmi_setup
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type arm9tdmi_processor_functions, #object
+ENTRY(arm9tdmi_processor_functions)
+ .word nommu_early_abort
+ .word cpu_arm9tdmi_proc_init
+ .word cpu_arm9tdmi_proc_fin
+ .word cpu_arm9tdmi_reset
+ .word cpu_arm9tdmi_do_idle
+ .word cpu_arm9tdmi_dcache_clean_area
+ .word cpu_arm9tdmi_switch_mm
+ .word 0 @ cpu_*_set_pte
+ .size arm9tdmi_processor_functions, . - arm9tdmi_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv4t"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v4"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_arm9tdmi_name, #object
+cpu_arm9tdmi_name:
+ .asciz "ARM9TDMI"
+ .size cpu_arm9tdmi_name, . - cpu_arm9tdmi_name
+
+ .type cpu_p2001_name, #object
+cpu_p2001_name:
+ .asciz "P2001"
+ .size cpu_p2001_name, . - cpu_p2001_name
+
+ .align
+
+ .section ".proc.info.init", #alloc, #execinstr
+
+ .type __arm9tdmi_proc_info, #object
+__arm9tdmi_proc_info:
+ .long 0x41009900
+ .long 0xfff8ff00
+ .long 0
+ .long 0
+ b __arm9tdmi_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
+ .long cpu_arm9tdmi_name
+ .long arm9tdmi_processor_functions
+ .long 0
+ .long 0
+ .long v4_cache_fns
+ .size __arm9tdmi_proc_info, . - __arm9dmi_proc_info
+
+ .type __p2001_proc_info, #object
+__p2001_proc_info:
+ .long 0x41029000
+ .long 0xffffffff
+ .long 0
+ .long 0
+ b __arm9tdmi_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
+ .long cpu_p2001_name
+ .long arm9tdmi_processor_functions
+ .long 0
+ .long 0
+ .long v4_cache_fns
+ .size __p2001_proc_info, . - __p2001_proc_info
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 3ca0c92e98a..e8b377d637f 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -311,12 +311,6 @@ ENTRY(xscale_flush_kern_dcache_page)
* - end - virtual end address
*/
ENTRY(xscale_dma_inv_range)
- mrc p15, 0, r2, c0, c0, 0 @ read ID
- eor r2, r2, #0x69000000
- eor r2, r2, #0x00052000
- bics r2, r2, #1
- beq xscale_dma_flush_range
-
tst r0, #CACHELINESIZE - 1
bic r0, r0, #CACHELINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
@@ -375,6 +369,30 @@ ENTRY(xscale_cache_fns)
.long xscale_dma_clean_range
.long xscale_dma_flush_range
+/*
+ * On stepping A0/A1 of the 80200, invalidating D-cache by line doesn't
+ * clear the dirty bits, which means that if we invalidate a dirty line,
+ * the dirty data can still be written back to external memory later on.
+ *
+ * The recommended workaround is to always do a clean D-cache line before
+ * doing an invalidate D-cache line, so on the affected processors,
+ * dma_inv_range() is implemented as dma_flush_range().
+ *
+ * See erratum #25 of "Intel 80200 Processor Specification Update",
+ * revision January 22, 2003, available at:
+ * http://www.intel.com/design/iio/specupdt/273415.htm
+ */
+ENTRY(xscale_80200_A0_A1_cache_fns)
+ .long xscale_flush_kern_cache_all
+ .long xscale_flush_user_cache_all
+ .long xscale_flush_user_cache_range
+ .long xscale_coherent_kern_range
+ .long xscale_coherent_user_range
+ .long xscale_flush_kern_dcache_page
+ .long xscale_dma_flush_range
+ .long xscale_dma_clean_range
+ .long xscale_dma_flush_range
+
ENTRY(cpu_xscale_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHELINESIZE
@@ -531,6 +549,11 @@ cpu_elf_name:
.asciz "v5"
.size cpu_elf_name, . - cpu_elf_name
+ .type cpu_80200_A0_A1_name, #object
+cpu_80200_A0_A1_name:
+ .asciz "XScale-80200 A0/A1"
+ .size cpu_80200_A0_A1_name, . - cpu_80200_A0_A1_name
+
.type cpu_80200_name, #object
cpu_80200_name:
.asciz "XScale-80200"
@@ -595,6 +618,29 @@ cpu_pxa270_name:
.section ".proc.info.init", #alloc, #execinstr
+ .type __80200_A0_A1_proc_info,#object
+__80200_A0_A1_proc_info:
+ .long 0x69052000
+ .long 0xfffffffe
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_80200_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_80200_A0_A1_cache_fns
+ .size __80200_A0_A1_proc_info, . - __80200_A0_A1_proc_info
+
.type __80200_proc_info,#object
__80200_proc_info:
.long 0x69052000
diff --git a/arch/arm/oprofile/op_model_xscale.c b/arch/arm/oprofile/op_model_xscale.c
index 34fdc733743..6576143f255 100644
--- a/arch/arm/oprofile/op_model_xscale.c
+++ b/arch/arm/oprofile/op_model_xscale.c
@@ -36,11 +36,11 @@
#ifdef CONFIG_ARCH_IOP310
#define XSCALE_PMU_IRQ IRQ_XS80200_PMU
#endif
-#ifdef CONFIG_ARCH_IOP321
-#define XSCALE_PMU_IRQ IRQ_IOP321_CORE_PMU
+#ifdef CONFIG_ARCH_IOP32X
+#define XSCALE_PMU_IRQ IRQ_IOP32X_CORE_PMU
#endif
-#ifdef CONFIG_ARCH_IOP331
-#define XSCALE_PMU_IRQ IRQ_IOP331_CORE_PMU
+#ifdef CONFIG_ARCH_IOP33X
+#define XSCALE_PMU_IRQ IRQ_IOP33X_CORE_PMU
#endif
#ifdef CONFIG_ARCH_PXA
#define XSCALE_PMU_IRQ IRQ_PMU
@@ -88,7 +88,7 @@ static struct pmu_counter results[MAX_COUNTERS];
/*
* There are two versions of the PMU in current XScale processors
* with differing register layouts and number of performance counters.
- * e.g. IOP321 is xsc1 whilst IOP331 is xsc2.
+ * e.g. IOP32x is xsc1 whilst IOP33x is xsc2.
* We detect which register layout to use in xscale_detect_pmu()
*/
enum { PMU_XSC1, PMU_XSC2 };
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
new file mode 100644
index 00000000000..23da00b1151
--- /dev/null
+++ b/arch/arm/plat-iop/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y := gpio.o i2c.o pci.o setup.o time.o
+obj-m :=
+obj-n :=
+obj- :=
diff --git a/arch/arm/plat-iop/gpio.c b/arch/arm/plat-iop/gpio.c
new file mode 100644
index 00000000000..eda43608341
--- /dev/null
+++ b/arch/arm/plat-iop/gpio.c
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/plat-iop/gpio.c
+ * GPIO handling for Intel IOP3xx processors.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <asm/hardware/iop3xx.h>
+
+void gpio_line_config(int line, int direction)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (direction == GPIO_IN) {
+ *IOP3XX_GPOE |= 1 << line;
+ } else if (direction == GPIO_OUT) {
+ *IOP3XX_GPOE &= ~(1 << line);
+ }
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_line_config);
+
+int gpio_line_get(int line)
+{
+ return !!(*IOP3XX_GPID & (1 << line));
+}
+EXPORT_SYMBOL(gpio_line_get);
+
+void gpio_line_set(int line, int value)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (value == GPIO_LOW) {
+ *IOP3XX_GPOD &= ~(1 << line);
+ } else if (value == GPIO_HIGH) {
+ *IOP3XX_GPOD |= 1 << line;
+ }
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_line_set);
diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c
new file mode 100644
index 00000000000..e99909bdba7
--- /dev/null
+++ b/arch/arm/plat-iop/i2c.c
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/plat-iop/i2c.c
+ *
+ * Author: Nicolas Pitre <nico@cam.org>
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ * Copyright (C) 2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/hardware/iop3xx.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#ifdef CONFIG_ARCH_IOP32X
+#define IRQ_IOP3XX_I2C_0 IRQ_IOP32X_I2C_0
+#define IRQ_IOP3XX_I2C_1 IRQ_IOP32X_I2C_1
+#endif
+#ifdef CONFIG_ARCH_IOP33X
+#define IRQ_IOP3XX_I2C_0 IRQ_IOP33X_I2C_0
+#define IRQ_IOP3XX_I2C_1 IRQ_IOP33X_I2C_1
+#endif
+
+static struct resource iop3xx_i2c0_resources[] = {
+ [0] = {
+ .start = 0xfffff680,
+ .end = 0xfffff697,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP3XX_I2C_0,
+ .end = IRQ_IOP3XX_I2C_0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device iop3xx_i2c0_device = {
+ .name = "IOP3xx-I2C",
+ .id = 0,
+ .num_resources = 2,
+ .resource = iop3xx_i2c0_resources,
+};
+
+
+static struct resource iop3xx_i2c1_resources[] = {
+ [0] = {
+ .start = 0xfffff6a0,
+ .end = 0xfffff6b7,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IOP3XX_I2C_1,
+ .end = IRQ_IOP3XX_I2C_1,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device iop3xx_i2c1_device = {
+ .name = "IOP3xx-I2C",
+ .id = 1,
+ .num_resources = 2,
+ .resource = iop3xx_i2c1_resources,
+};
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
new file mode 100644
index 00000000000..e647812654f
--- /dev/null
+++ b/arch/arm/plat-iop/pci.c
@@ -0,0 +1,247 @@
+/*
+ * arch/arm/plat-iop/pci.c
+ *
+ * PCI support for the Intel IOP32X and IOP33X processors
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/hardware.h>
+#include <asm/mach/pci.h>
+#include <asm/hardware/iop3xx.h>
+
+// #define DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...) do { } while (0)
+#endif
+
+/*
+ * This routine builds either a type0 or type1 configuration command. If the
+ * bus is on the 803xx then a type0 made, else a type1 is created.
+ */
+static u32 iop3xx_cfg_address(struct pci_bus *bus, int devfn, int where)
+{
+ struct pci_sys_data *sys = bus->sysdata;
+ u32 addr;
+
+ if (sys->busnr == bus->number)
+ addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
+ else
+ addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
+
+ addr |= PCI_FUNC(devfn) << 8 | (where & ~3);
+
+ return addr;
+}
+
+/*
+ * This routine checks the status of the last configuration cycle. If an error
+ * was detected it returns a 1, else it returns a 0. The errors being checked
+ * are parity, master abort, target abort (master and target). These types of
+ * errors occure during a config cycle where there is no device, like during
+ * the discovery stage.
+ */
+static int iop3xx_pci_status(void)
+{
+ unsigned int status;
+ int ret = 0;
+
+ /*
+ * Check the status registers.
+ */
+ status = *IOP3XX_ATUSR;
+ if (status & 0xf900) {
+ DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
+ *IOP3XX_ATUSR = status & 0xf900;
+ ret = 1;
+ }
+
+ status = *IOP3XX_ATUISR;
+ if (status & 0x679f) {
+ DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
+ *IOP3XX_ATUISR = status & 0x679f;
+ ret = 1;
+ }
+
+ return ret;
+}
+
+/*
+ * Simply write the address register and read the configuration
+ * data. Note that the 4 nop's ensure that we are able to handle
+ * a delayed abort (in theory.)
+ */
+static inline u32 iop3xx_read(unsigned long addr)
+{
+ u32 val;
+
+ __asm__ __volatile__(
+ "str %1, [%2]\n\t"
+ "ldr %0, [%3]\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ : "=r" (val)
+ : "r" (addr), "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
+
+ return val;
+}
+
+/*
+ * The read routines must check the error status of the last configuration
+ * cycle. If there was an error, the routine returns all hex f's.
+ */
+static int
+iop3xx_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *value)
+{
+ unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
+ u32 val = iop3xx_read(addr) >> ((where & 3) * 8);
+
+ if (iop3xx_pci_status())
+ val = 0xffffffff;
+
+ *value = val;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+iop3xx_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 value)
+{
+ unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
+ u32 val;
+
+ if (size != 4) {
+ val = iop3xx_read(addr);
+ if (iop3xx_pci_status())
+ return PCIBIOS_SUCCESSFUL;
+
+ where = (where & 3) * 8;
+
+ if (size == 1)
+ val &= ~(0xff << where);
+ else
+ val &= ~(0xffff << where);
+
+ *IOP3XX_OCCDR = val | value << where;
+ } else {
+ asm volatile(
+ "str %1, [%2]\n\t"
+ "str %0, [%3]\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ :
+ : "r" (value), "r" (addr),
+ "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops iop3xx_ops = {
+ .read = iop3xx_read_config,
+ .write = iop3xx_write_config,
+};
+
+/*
+ * When a PCI device does not exist during config cycles, the 80200 gets a
+ * bus error instead of returning 0xffffffff. This handler simply returns.
+ */
+static int
+iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
+ addr, fsr, regs->ARM_pc, regs->ARM_lr);
+
+ /*
+ * If it was an imprecise abort, then we need to correct the
+ * return address to be _after_ the instruction.
+ */
+ if (fsr & (1 << 10))
+ regs->ARM_pc += 4;
+
+ return 0;
+}
+
+int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+ struct resource *res;
+
+ if (nr != 0)
+ return 0;
+
+ res = kzalloc(2 * sizeof(struct resource), GFP_KERNEL);
+ if (!res)
+ panic("PCI: unable to alloc resources");
+
+ res[0].start = IOP3XX_PCI_LOWER_IO_VA;
+ res[0].end = IOP3XX_PCI_LOWER_IO_VA + IOP3XX_PCI_IO_WINDOW_SIZE - 1;
+ res[0].name = "IOP3XX PCI I/O Space";
+ res[0].flags = IORESOURCE_IO;
+ request_resource(&ioport_resource, &res[0]);
+
+ res[1].start = IOP3XX_PCI_LOWER_MEM_PA;
+ res[1].end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
+ res[1].name = "IOP3XX PCI Memory Space";
+ res[1].flags = IORESOURCE_MEM;
+ request_resource(&iomem_resource, &res[1]);
+
+ sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - IOP3XX_PCI_LOWER_MEM_BA;
+ sys->io_offset = IOP3XX_PCI_LOWER_IO_VA - IOP3XX_PCI_LOWER_IO_BA;
+
+ sys->resource[0] = &res[0];
+ sys->resource[1] = &res[1];
+ sys->resource[2] = NULL;
+
+ return 1;
+}
+
+struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ return pci_scan_bus(sys->busnr, &iop3xx_ops, sys);
+}
+
+void iop3xx_pci_preinit(void)
+{
+ DBG("PCI: Intel 803xx PCI init code.\n");
+ DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD);
+ DBG("ATU: IOP3XX_OMWTVR0=0x%04x, IOP3XX_OIOWTVR=0x%04x\n",
+ *IOP3XX_OMWTVR0,
+ *IOP3XX_OIOWTVR);
+ DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR);
+ DBG("ATU: IOP3XX_IABAR0=0x%08x IOP3XX_IALR0=0x%08x IOP3XX_IATVR0=%08x\n",
+ *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0);
+ DBG("ATU: IOP3XX_OMWTVR0=0x%08x\n", *IOP3XX_OMWTVR0);
+ DBG("ATU: IOP3XX_IABAR1=0x%08x IOP3XX_IALR1=0x%08x\n",
+ *IOP3XX_IABAR1, *IOP3XX_IALR1);
+ DBG("ATU: IOP3XX_ERBAR=0x%08x IOP3XX_ERLR=0x%08x IOP3XX_ERTVR=%08x\n",
+ *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR);
+ DBG("ATU: IOP3XX_IABAR2=0x%08x IOP3XX_IALR2=0x%08x IOP3XX_IATVR2=%08x\n",
+ *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2);
+ DBG("ATU: IOP3XX_IABAR3=0x%08x IOP3XX_IALR3=0x%08x IOP3XX_IATVR3=%08x\n",
+ *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3);
+
+ hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, "imprecise external abort");
+}
diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c
new file mode 100644
index 00000000000..4689db638e9
--- /dev/null
+++ b/arch/arm/plat-iop/setup.c
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/plat-iop/setup.c
+ *
+ * Author: Nicolas Pitre <nico@cam.org>
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ * Copyright (C) 2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/iop3xx.h>
+
+/*
+ * Standard IO mapping for all IOP3xx based systems
+ */
+static struct map_desc iop3xx_std_desc[] __initdata = {
+ { /* mem mapped registers */
+ .virtual = IOP3XX_PERIPHERAL_VIRT_BASE,
+ .pfn = __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE),
+ .length = IOP3XX_PERIPHERAL_SIZE,
+ .type = MT_DEVICE,
+ }, { /* PCI IO space */
+ .virtual = IOP3XX_PCI_LOWER_IO_VA,
+ .pfn = __phys_to_pfn(IOP3XX_PCI_LOWER_IO_PA),
+ .length = IOP3XX_PCI_IO_WINDOW_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init iop3xx_map_io(void)
+{
+ iotable_init(iop3xx_std_desc, ARRAY_SIZE(iop3xx_std_desc));
+}
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
new file mode 100644
index 00000000000..06282dffbdc
--- /dev/null
+++ b/arch/arm/plat-iop/time.c
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/plat-iop/time.c
+ *
+ * Timer code for IOP32x and IOP33x based systems
+ *
+ * Author: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright 2002-2003 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+#ifdef CONFIG_ARCH_IOP32X
+#define IRQ_IOP3XX_TIMER0 IRQ_IOP32X_TIMER0
+#else
+#ifdef CONFIG_ARCH_IOP33X
+#define IRQ_IOP3XX_TIMER0 IRQ_IOP33X_TIMER0
+#endif
+#endif
+
+static unsigned long ticks_per_jiffy;
+static unsigned long ticks_per_usec;
+static unsigned long next_jiffy_time;
+
+unsigned long iop3xx_gettimeoffset(void)
+{
+ unsigned long offset;
+
+ offset = next_jiffy_time - *IOP3XX_TU_TCR1;
+
+ return offset / ticks_per_usec;
+}
+
+static irqreturn_t
+iop3xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ write_seqlock(&xtime_lock);
+
+ iop3xx_cp6_enable();
+ asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (1));
+ iop3xx_cp6_disable();
+
+ while ((signed long)(next_jiffy_time - *IOP3XX_TU_TCR1)
+ >= ticks_per_jiffy) {
+ timer_tick(regs);
+ next_jiffy_time -= ticks_per_jiffy;
+ }
+
+ write_sequnlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction iop3xx_timer_irq = {
+ .name = "IOP3XX Timer Tick",
+ .handler = iop3xx_timer_interrupt,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+};
+
+void __init iop3xx_init_time(unsigned long tick_rate)
+{
+ u32 timer_ctl;
+
+ ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
+ ticks_per_usec = tick_rate / 1000000;
+ next_jiffy_time = 0xffffffff;
+
+ timer_ctl = IOP3XX_TMR_EN | IOP3XX_TMR_PRIVILEGED |
+ IOP3XX_TMR_RELOAD | IOP3XX_TMR_RATIO_1_1;
+
+ /*
+ * We use timer 0 for our timer interrupt, and timer 1 as
+ * monotonic counter for tracking missed jiffies.
+ */
+ iop3xx_cp6_enable();
+ asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (ticks_per_jiffy - 1));
+ asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (timer_ctl));
+ asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (0xffffffff));
+ asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (timer_ctl));
+ iop3xx_cp6_disable();
+
+ setup_irq(IRQ_IOP3XX_TIMER0, &iop3xx_timer_irq);
+}
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 7f45c7c3e67..f1179ad4be1 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -100,6 +100,7 @@ void clk_disable(struct clk *clk)
return;
spin_lock_irqsave(&clockfw_lock, flags);
+ BUG_ON(clk->usecount == 0);
if (arch_clock->clk_disable)
arch_clock->clk_disable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
@@ -322,6 +323,31 @@ EXPORT_SYMBOL(clk_allow_idle);
/*-------------------------------------------------------------------------*/
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+ struct clk *ck;
+ unsigned long flags;
+
+ list_for_each_entry(ck, &clocks, node) {
+ if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) ||
+ ck->enable_reg == 0)
+ continue;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (arch_clock->clk_disable_unused)
+ arch_clock->clk_disable_unused(ck);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+ }
+
+ return 0;
+}
+late_initcall(clk_disable_unused);
+#endif
+
int __init clk_init(struct clk_functions * custom_clocks)
{
if (!custom_clocks) {
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 1812f237d12..dbc3f44e07a 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -148,7 +148,7 @@ static inline void omap_init_kp(void) {}
#ifdef CONFIG_ARCH_OMAP24XX
#define OMAP_MMC1_BASE 0x4809c000
-#define OMAP_MMC1_INT 83
+#define OMAP_MMC1_INT INT_24XX_MMC_IRQ
#else
#define OMAP_MMC1_BASE 0xfffb7800
#define OMAP_MMC1_INT INT_MMC
@@ -225,7 +225,14 @@ static void __init omap_init_mmc(void)
/* block 1 is always available and has just one pinout option */
mmc = &mmc_conf->mmc[0];
if (mmc->enabled) {
- if (!cpu_is_omap24xx()) {
+ if (cpu_is_omap24xx()) {
+ omap_cfg_reg(H18_24XX_MMC_CMD);
+ omap_cfg_reg(H15_24XX_MMC_CLKI);
+ omap_cfg_reg(G19_24XX_MMC_CLKO);
+ omap_cfg_reg(F20_24XX_MMC_DAT0);
+ omap_cfg_reg(F19_24XX_MMC_DAT_DIR0);
+ omap_cfg_reg(G18_24XX_MMC_CMD_DIR);
+ } else {
omap_cfg_reg(MMC_CMD);
omap_cfg_reg(MMC_CLK);
omap_cfg_reg(MMC_DAT0);
@@ -236,7 +243,14 @@ static void __init omap_init_mmc(void)
}
}
if (mmc->wire4) {
- if (!cpu_is_omap24xx()) {
+ if (cpu_is_omap24xx()) {
+ omap_cfg_reg(H14_24XX_MMC_DAT1);
+ omap_cfg_reg(E19_24XX_MMC_DAT2);
+ omap_cfg_reg(D19_24XX_MMC_DAT3);
+ omap_cfg_reg(E20_24XX_MMC_DAT_DIR1);
+ omap_cfg_reg(F18_24XX_MMC_DAT_DIR2);
+ omap_cfg_reg(E18_24XX_MMC_DAT_DIR3);
+ } else {
omap_cfg_reg(MMC_DAT1);
/* NOTE: DAT2 can be on W10 (here) or M15 */
if (!mmc->nomux)
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 9eddc950714..1bbb431843c 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -119,32 +119,41 @@ static void clear_lch_regs(int lch)
omap_writew(0, lch_base + i);
}
-void omap_set_dma_priority(int dst_port, int priority)
+void omap_set_dma_priority(int lch, int dst_port, int priority)
{
unsigned long reg;
u32 l;
- switch (dst_port) {
- case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */
- reg = OMAP_TC_OCPT1_PRIOR;
- break;
- case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */
- reg = OMAP_TC_OCPT2_PRIOR;
- break;
- case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */
- reg = OMAP_TC_EMIFF_PRIOR;
- break;
- case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */
- reg = OMAP_TC_EMIFS_PRIOR;
- break;
- default:
- BUG();
- return;
+ if (cpu_class_is_omap1()) {
+ switch (dst_port) {
+ case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */
+ reg = OMAP_TC_OCPT1_PRIOR;
+ break;
+ case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */
+ reg = OMAP_TC_OCPT2_PRIOR;
+ break;
+ case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */
+ reg = OMAP_TC_EMIFF_PRIOR;
+ break;
+ case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */
+ reg = OMAP_TC_EMIFS_PRIOR;
+ break;
+ default:
+ BUG();
+ return;
+ }
+ l = omap_readl(reg);
+ l &= ~(0xf << 8);
+ l |= (priority & 0xf) << 8;
+ omap_writel(l, reg);
+ }
+
+ if (cpu_is_omap24xx()) {
+ if (priority)
+ OMAP_DMA_CCR_REG(lch) |= (1 << 6);
+ else
+ OMAP_DMA_CCR_REG(lch) &= ~(1 << 6);
}
- l = omap_readl(reg);
- l &= ~(0xf << 8);
- l |= (priority & 0xf) << 8;
- omap_writel(l, reg);
}
void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
@@ -234,6 +243,14 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
OMAP1_DMA_LCH_CTRL_REG(lch) = w;
}
+void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
+{
+ if (cpu_is_omap24xx()) {
+ OMAP_DMA_CSDP_REG(lch) &= ~(0x3 << 16);
+ OMAP_DMA_CSDP_REG(lch) |= (mode << 16);
+ }
+}
+
/* Note that src_port is only for omap1 */
void omap_set_dma_src_params(int lch, int src_port, int src_amode,
unsigned long src_start,
@@ -698,6 +715,32 @@ void omap_stop_dma(int lch)
}
/*
+ * Allows changing the DMA callback function or data. This may be needed if
+ * the driver shares a single DMA channel for multiple dma triggers.
+ */
+int omap_set_dma_callback(int lch,
+ void (* callback)(int lch, u16 ch_status, void *data),
+ void *data)
+{
+ unsigned long flags;
+
+ if (lch < 0)
+ return -ENODEV;
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ if (dma_chan[lch].dev_id == -1) {
+ printk(KERN_ERR "DMA callback for not set for free channel\n");
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+ return -EINVAL;
+ }
+ dma_chan[lch].callback = callback;
+ dma_chan[lch].data = data;
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+
+ return 0;
+}
+
+/*
* Returns current physical source address for the given DMA channel.
* If the channel is running the caller must disable interrupts prior calling
* this function and process the returned value before re-enabling interrupt to
@@ -1339,6 +1382,14 @@ static int __init omap_init_dma(void)
dma_chan_count = 16;
} else
dma_chan_count = 9;
+ if (cpu_is_omap16xx()) {
+ u16 w;
+
+ /* this would prevent OMAP sleep */
+ w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+ w &= ~(1 << 8);
+ omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+ }
} else if (cpu_is_omap24xx()) {
u8 revision = omap_readb(OMAP_DMA4_REVISION);
printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
@@ -1414,11 +1465,13 @@ EXPORT_SYMBOL(omap_request_dma);
EXPORT_SYMBOL(omap_free_dma);
EXPORT_SYMBOL(omap_start_dma);
EXPORT_SYMBOL(omap_stop_dma);
+EXPORT_SYMBOL(omap_set_dma_callback);
EXPORT_SYMBOL(omap_enable_dma_irq);
EXPORT_SYMBOL(omap_disable_dma_irq);
EXPORT_SYMBOL(omap_set_dma_transfer_params);
EXPORT_SYMBOL(omap_set_dma_color_mode);
+EXPORT_SYMBOL(omap_set_dma_write_mode);
EXPORT_SYMBOL(omap_set_dma_src_params);
EXPORT_SYMBOL(omap_set_dma_src_index);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 50524436de6..bcbb8d7392b 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -75,10 +75,14 @@ struct omap_dm_timer {
#endif
void __iomem *io_base;
unsigned reserved:1;
+ unsigned enabled:1;
};
#ifdef CONFIG_ARCH_OMAP1
+#define omap_dm_clk_enable(x)
+#define omap_dm_clk_disable(x)
+
static struct omap_dm_timer dm_timers[] = {
{ .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
{ .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 },
@@ -92,6 +96,9 @@ static struct omap_dm_timer dm_timers[] = {
#elif defined(CONFIG_ARCH_OMAP2)
+#define omap_dm_clk_enable(x) clk_enable(x)
+#define omap_dm_clk_disable(x) clk_disable(x)
+
static struct omap_dm_timer dm_timers[] = {
{ .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
{ .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 },
@@ -154,24 +161,28 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer)
{
u32 l;
- if (timer != &dm_timers[0]) {
+ if (!cpu_class_is_omap2() || timer != &dm_timers[0]) {
omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
omap_dm_timer_wait_for_reset(timer);
}
- omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_SYS_CLK);
+ omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
/* Set to smart-idle mode */
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG);
l |= 0x02 << 3;
+
+ if (cpu_class_is_omap2() && timer == &dm_timers[0]) {
+ /* Enable wake-up only for GPT1 on OMAP2 CPUs*/
+ l |= 1 << 2;
+ /* Non-posted mode */
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0);
+ }
omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
}
static void omap_dm_timer_prepare(struct omap_dm_timer *timer)
{
-#ifdef CONFIG_ARCH_OMAP2
- clk_enable(timer->iclk);
- clk_enable(timer->fclk);
-#endif
+ omap_dm_timer_enable(timer);
omap_dm_timer_reset(timer);
}
@@ -223,15 +234,36 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
void omap_dm_timer_free(struct omap_dm_timer *timer)
{
+ omap_dm_timer_enable(timer);
omap_dm_timer_reset(timer);
-#ifdef CONFIG_ARCH_OMAP2
- clk_disable(timer->iclk);
- clk_disable(timer->fclk);
-#endif
+ omap_dm_timer_disable(timer);
+
WARN_ON(!timer->reserved);
timer->reserved = 0;
}
+void omap_dm_timer_enable(struct omap_dm_timer *timer)
+{
+ if (timer->enabled)
+ return;
+
+ omap_dm_clk_enable(timer->fclk);
+ omap_dm_clk_enable(timer->iclk);
+
+ timer->enabled = 1;
+}
+
+void omap_dm_timer_disable(struct omap_dm_timer *timer)
+{
+ if (!timer->enabled)
+ return;
+
+ omap_dm_clk_disable(timer->iclk);
+ omap_dm_clk_disable(timer->fclk);
+
+ timer->enabled = 0;
+}
+
int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
{
return timer->irq;
@@ -276,7 +308,7 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
{
- return timer->fclk;
+ return timer->fclk;
}
__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
@@ -406,11 +438,16 @@ void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
unsigned int value)
{
omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, value);
}
unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
{
- return omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG);
+ unsigned int l;
+
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG);
+
+ return l;
}
void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
@@ -420,12 +457,16 @@ void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
{
- return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG);
+ unsigned int l;
+
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG);
+
+ return l;
}
void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
{
- return omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
}
int omap_dm_timers_active(void)
@@ -436,9 +477,14 @@ int omap_dm_timers_active(void)
struct omap_dm_timer *timer;
timer = &dm_timers[i];
+
+ if (!timer->enabled)
+ continue;
+
if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
- OMAP_TIMER_CTRL_ST)
+ OMAP_TIMER_CTRL_ST) {
return 1;
+ }
}
return 0;
}
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index cd7f973fb28..f55f99ae58a 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -94,6 +94,8 @@
#define OMAP24XX_GPIO_SYSCONFIG 0x0010
#define OMAP24XX_GPIO_SYSSTATUS 0x0014
#define OMAP24XX_GPIO_IRQSTATUS1 0x0018
+#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
+#define OMAP24XX_GPIO_IRQENABLE2 0x002c
#define OMAP24XX_GPIO_IRQENABLE1 0x001c
#define OMAP24XX_GPIO_CTRL 0x0030
#define OMAP24XX_GPIO_OE 0x0034
@@ -110,8 +112,6 @@
#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090
#define OMAP24XX_GPIO_SETDATAOUT 0x0094
-#define OMAP_MPUIO_MASK (~OMAP_MAX_GPIO_LINES & 0xff)
-
struct gpio_bank {
void __iomem *base;
u16 irq;
@@ -216,11 +216,13 @@ static inline int gpio_valid(int gpio)
{
if (gpio < 0)
return -1;
+#ifndef CONFIG_ARCH_OMAP24XX
if (OMAP_GPIO_IS_MPUIO(gpio)) {
- if ((gpio & OMAP_MPUIO_MASK) > 16)
+ if (gpio >= OMAP_MAX_GPIO_LINES + 16)
return -1;
return 0;
}
+#endif
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap15xx() && gpio < 16)
return 0;
@@ -529,6 +531,10 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
return;
}
__raw_writel(gpio_mask, reg);
+
+ /* Workaround for clearing DSP GPIO interrupts to allow retention */
+ if (cpu_is_omap2420())
+ __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2);
}
static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
@@ -662,6 +668,14 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
}
}
+static void _reset_gpio(struct gpio_bank *bank, int gpio)
+{
+ _set_gpio_direction(bank, get_gpio_index(gpio), 1);
+ _set_gpio_irqenable(bank, gpio, 0);
+ _clear_gpio_irqstatus(bank, gpio);
+ _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+}
+
/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
static int gpio_wake_enable(unsigned int irq, unsigned int enable)
{
@@ -672,9 +686,7 @@ static int gpio_wake_enable(unsigned int irq, unsigned int enable)
if (check_gpio(gpio) < 0)
return -ENODEV;
bank = get_gpio_bank(gpio);
- spin_lock(&bank->lock);
retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable);
- spin_unlock(&bank->lock);
return retval;
}
@@ -696,7 +708,9 @@ int omap_request_gpio(int gpio)
}
bank->reserved_map |= (1 << get_gpio_index(gpio));
- /* Set trigger to none. You need to enable the trigger after request_irq */
+ /* Set trigger to none. You need to enable the desired trigger with
+ * request_irq() or set_irq_type().
+ */
_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
#ifdef CONFIG_ARCH_OMAP15XX
@@ -756,9 +770,7 @@ void omap_free_gpio(int gpio)
}
#endif
bank->reserved_map &= ~(1 << get_gpio_index(gpio));
- _set_gpio_direction(bank, get_gpio_index(gpio), 1);
- _set_gpio_irqenable(bank, gpio, 0);
- _clear_gpio_irqstatus(bank, gpio);
+ _reset_gpio(bank, gpio);
spin_unlock(&bank->lock);
}
@@ -898,6 +910,14 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
}
+static void gpio_irq_shutdown(unsigned int irq)
+{
+ unsigned int gpio = irq - IH_GPIO_BASE;
+ struct gpio_bank *bank = get_gpio_bank(gpio);
+
+ _reset_gpio(bank, gpio);
+}
+
static void gpio_ack_irq(unsigned int irq)
{
unsigned int gpio = irq - IH_GPIO_BASE;
@@ -946,6 +966,7 @@ static void mpuio_unmask_irq(unsigned int irq)
static struct irq_chip gpio_irq_chip = {
.name = "GPIO",
+ .shutdown = gpio_irq_shutdown,
.ack = gpio_ack_irq,
.mask = gpio_mask_irq,
.unmask = gpio_unmask_irq,
@@ -985,7 +1006,7 @@ static int __init _omap_gpio_init(void)
else
clk_enable(gpio_ick);
gpio_fck = clk_get(NULL, "gpios_fck");
- if (IS_ERR(gpio_ick))
+ if (IS_ERR(gpio_fck))
printk("Could not get gpios_fck\n");
else
clk_enable(gpio_fck);
@@ -1144,8 +1165,8 @@ static int omap_gpio_resume(struct sys_device *dev)
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
case METHOD_GPIO_24XX:
- wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
- wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
+ wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
+ wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
default:
continue;
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 196aac3ac32..ade9a0fa6ef 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -75,8 +75,6 @@ static struct clk *mcbsp1_ick = 0;
static struct clk *mcbsp1_fck = 0;
static struct clk *mcbsp2_ick = 0;
static struct clk *mcbsp2_fck = 0;
-static struct clk *sys_ck = 0;
-static struct clk *sys_clkout = 0;
#endif
static void omap_mcbsp_dump_reg(u8 id)
@@ -232,7 +230,6 @@ static void omap2_mcbsp2_mux_setup(void)
omap_cfg_reg(W15_24XX_MCBSP2_DR);
omap_cfg_reg(V15_24XX_MCBSP2_DX);
omap_cfg_reg(V14_24XX_GPIO117);
- omap_cfg_reg(W14_24XX_SYS_CLKOUT);
}
#endif
@@ -984,13 +981,7 @@ static int __init omap_mcbsp_init(void)
if (cpu_is_omap24xx()) {
mcbsp_info = mcbsp_24xx;
mcbsp_count = ARRAY_SIZE(mcbsp_24xx);
-
- /* REVISIT: where's the right place? */
omap2_mcbsp2_mux_setup();
- sys_ck = clk_get(0, "sys_ck");
- sys_clkout = clk_get(0, "sys_clkout");
- clk_set_parent(sys_clkout, sys_ck);
- clk_enable(sys_clkout);
}
#endif
for (i = 0; i < OMAP_MAX_MCBSP_COUNT ; i++) {
diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c
deleted file mode 100644
index 04b4102727a..00000000000
--- a/arch/arm/plat-omap/pm.c
+++ /dev/null
@@ -1,670 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/pm.c
- *
- * OMAP Power Management Routines
- *
- * Original code for the SA11x0:
- * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
- *
- * Modified for the PXA250 by Nicolas Pitre:
- * Copyright (c) 2002 Monta Vista Software, Inc.
- *
- * Modified for the OMAP1510 by David Singleton:
- * Copyright (c) 2002 Monta Vista Software, Inc.
- *
- * Cleanup 2004 for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/pm.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/pm.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <asm/mach-types.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tps65010.h>
-#include <asm/arch/dsp_common.h>
-
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-
-static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
-static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
-static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE];
-static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
-static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
-
-static void (*omap_sram_idle)(void) = NULL;
-static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
-
-/*
- * Let's power down on idle, but only if we are really
- * idle, because once we start down the path of
- * going idle we continue to do idle even if we get
- * a clock tick interrupt . .
- */
-void omap_pm_idle(void)
-{
- unsigned int mask32 = 0;
-
- /*
- * If the DSP is being used let's just idle the CPU, the overhead
- * to wake up from Big Sleep is big, milliseconds versus micro
- * seconds for wait for interrupt.
- */
-
- local_irq_disable();
- local_fiq_disable();
- if (need_resched()) {
- local_fiq_enable();
- local_irq_enable();
- return;
- }
- mask32 = omap_readl(ARM_SYSST);
-
- /*
- * Prevent the ULPD from entering low power state by setting
- * POWER_CTRL_REG:4 = 0
- */
- omap_writew(omap_readw(ULPD_POWER_CTRL) &
- ~ULPD_DEEP_SLEEP_TRANSITION_EN, ULPD_POWER_CTRL);
-
- /*
- * Since an interrupt may set up a timer, we don't want to
- * reprogram the hardware timer with interrupts enabled.
- * Re-enable interrupts only after returning from idle.
- */
- timer_dyn_reprogram();
-
- if ((mask32 & DSP_IDLE) == 0) {
- __asm__ volatile ("mcr p15, 0, r0, c7, c0, 4");
- } else
- omap_sram_idle();
-
- local_fiq_enable();
- local_irq_enable();
-}
-
-/*
- * Configuration of the wakeup event is board specific. For the
- * moment we put it into this helper function. Later it may move
- * to board specific files.
- */
-static void omap_pm_wakeup_setup(void)
-{
- u32 level1_wake = 0;
- u32 level2_wake = OMAP_IRQ_BIT(INT_UART2);
-
- /*
- * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade,
- * and the L2 wakeup interrupts: keypad and UART2. Note that the
- * drivers must still separately call omap_set_gpio_wakeup() to
- * wake up to a GPIO interrupt.
- */
- if (cpu_is_omap730())
- level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
- OMAP_IRQ_BIT(INT_730_IH2_IRQ);
- else if (cpu_is_omap1510())
- level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
- OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
- else if (cpu_is_omap16xx())
- level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
- OMAP_IRQ_BIT(INT_1610_IH2_IRQ);
-
- omap_writel(~level1_wake, OMAP_IH1_MIR);
-
- if (cpu_is_omap730()) {
- omap_writel(~level2_wake, OMAP_IH2_0_MIR);
- omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), OMAP_IH2_1_MIR);
- } else if (cpu_is_omap1510()) {
- level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
- omap_writel(~level2_wake, OMAP_IH2_MIR);
- } else if (cpu_is_omap16xx()) {
- level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
- omap_writel(~level2_wake, OMAP_IH2_0_MIR);
-
- /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
- omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR);
- omap_writel(~0x0, OMAP_IH2_2_MIR);
- omap_writel(~0x0, OMAP_IH2_3_MIR);
- }
-
- /* New IRQ agreement, recalculate in cascade order */
- omap_writel(1, OMAP_IH2_CONTROL);
- omap_writel(1, OMAP_IH1_CONTROL);
-}
-
-void omap_pm_suspend(void)
-{
- unsigned long arg0 = 0, arg1 = 0;
-
- printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev);
-
- omap_serial_wake_trigger(1);
-
- if (machine_is_omap_osk()) {
- /* Stop LED1 (D9) blink */
- tps65010_set_led(LED1, OFF);
- }
-
- omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
-
- /*
- * Step 1: turn off interrupts (FIXME: NOTE: already disabled)
- */
-
- local_irq_disable();
- local_fiq_disable();
-
- /*
- * Step 2: save registers
- *
- * The omap is a strange/beautiful device. The caches, memory
- * and register state are preserved across power saves.
- * We have to save and restore very little register state to
- * idle the omap.
- *
- * Save interrupt, MPUI, ARM and UPLD control registers.
- */
-
- if (cpu_is_omap730()) {
- MPUI730_SAVE(OMAP_IH1_MIR);
- MPUI730_SAVE(OMAP_IH2_0_MIR);
- MPUI730_SAVE(OMAP_IH2_1_MIR);
- MPUI730_SAVE(MPUI_CTRL);
- MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
- MPUI730_SAVE(MPUI_DSP_API_CONFIG);
- MPUI730_SAVE(EMIFS_CONFIG);
- MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
-
- } else if (cpu_is_omap1510()) {
- MPUI1510_SAVE(OMAP_IH1_MIR);
- MPUI1510_SAVE(OMAP_IH2_MIR);
- MPUI1510_SAVE(MPUI_CTRL);
- MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
- MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
- MPUI1510_SAVE(EMIFS_CONFIG);
- MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
- } else if (cpu_is_omap16xx()) {
- MPUI1610_SAVE(OMAP_IH1_MIR);
- MPUI1610_SAVE(OMAP_IH2_0_MIR);
- MPUI1610_SAVE(OMAP_IH2_1_MIR);
- MPUI1610_SAVE(OMAP_IH2_2_MIR);
- MPUI1610_SAVE(OMAP_IH2_3_MIR);
- MPUI1610_SAVE(MPUI_CTRL);
- MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
- MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
- MPUI1610_SAVE(EMIFS_CONFIG);
- MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
- }
-
- ARM_SAVE(ARM_CKCTL);
- ARM_SAVE(ARM_IDLECT1);
- ARM_SAVE(ARM_IDLECT2);
- if (!(cpu_is_omap1510()))
- ARM_SAVE(ARM_IDLECT3);
- ARM_SAVE(ARM_EWUPCT);
- ARM_SAVE(ARM_RSTCT1);
- ARM_SAVE(ARM_RSTCT2);
- ARM_SAVE(ARM_SYSST);
- ULPD_SAVE(ULPD_CLOCK_CTRL);
- ULPD_SAVE(ULPD_STATUS_REQ);
-
- /* (Step 3 removed - we now allow deep sleep by default) */
-
- /*
- * Step 4: OMAP DSP Shutdown
- */
-
-
- /*
- * Step 5: Wakeup Event Setup
- */
-
- omap_pm_wakeup_setup();
-
- /*
- * Step 6: ARM and Traffic controller shutdown
- */
-
- /* disable ARM watchdog */
- omap_writel(0x00F5, OMAP_WDT_TIMER_MODE);
- omap_writel(0x00A0, OMAP_WDT_TIMER_MODE);
-
- /*
- * Step 6b: ARM and Traffic controller shutdown
- *
- * Step 6 continues here. Prepare jump to power management
- * assembly code in internal SRAM.
- *
- * Since the omap_cpu_suspend routine has been copied to
- * SRAM, we'll do an indirect procedure call to it and pass the
- * contents of arm_idlect1 and arm_idlect2 so it can restore
- * them when it wakes up and it will return.
- */
-
- arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1];
- arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2];
-
- /*
- * Step 6c: ARM and Traffic controller shutdown
- *
- * Jump to assembly code. The processor will stay there
- * until wake up.
- */
- omap_sram_suspend(arg0, arg1);
-
- /*
- * If we are here, processor is woken up!
- */
-
- /*
- * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did
- */
-
- if (!(cpu_is_omap1510()))
- ARM_RESTORE(ARM_IDLECT3);
- ARM_RESTORE(ARM_CKCTL);
- ARM_RESTORE(ARM_EWUPCT);
- ARM_RESTORE(ARM_RSTCT1);
- ARM_RESTORE(ARM_RSTCT2);
- ARM_RESTORE(ARM_SYSST);
- ULPD_RESTORE(ULPD_CLOCK_CTRL);
- ULPD_RESTORE(ULPD_STATUS_REQ);
-
- if (cpu_is_omap730()) {
- MPUI730_RESTORE(EMIFS_CONFIG);
- MPUI730_RESTORE(EMIFF_SDRAM_CONFIG);
- MPUI730_RESTORE(OMAP_IH1_MIR);
- MPUI730_RESTORE(OMAP_IH2_0_MIR);
- MPUI730_RESTORE(OMAP_IH2_1_MIR);
- } else if (cpu_is_omap1510()) {
- MPUI1510_RESTORE(MPUI_CTRL);
- MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
- MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
- MPUI1510_RESTORE(EMIFS_CONFIG);
- MPUI1510_RESTORE(EMIFF_SDRAM_CONFIG);
- MPUI1510_RESTORE(OMAP_IH1_MIR);
- MPUI1510_RESTORE(OMAP_IH2_MIR);
- } else if (cpu_is_omap16xx()) {
- MPUI1610_RESTORE(MPUI_CTRL);
- MPUI1610_RESTORE(MPUI_DSP_BOOT_CONFIG);
- MPUI1610_RESTORE(MPUI_DSP_API_CONFIG);
- MPUI1610_RESTORE(EMIFS_CONFIG);
- MPUI1610_RESTORE(EMIFF_SDRAM_CONFIG);
-
- MPUI1610_RESTORE(OMAP_IH1_MIR);
- MPUI1610_RESTORE(OMAP_IH2_0_MIR);
- MPUI1610_RESTORE(OMAP_IH2_1_MIR);
- MPUI1610_RESTORE(OMAP_IH2_2_MIR);
- MPUI1610_RESTORE(OMAP_IH2_3_MIR);
- }
-
- omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
-
- /*
- * Reenable interrupts
- */
-
- local_irq_enable();
- local_fiq_enable();
-
- omap_serial_wake_trigger(0);
-
- printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev);
-
- if (machine_is_omap_osk()) {
- /* Let LED1 (D9) blink again */
- tps65010_set_led(LED1, BLINK);
- }
-}
-
-#if defined(DEBUG) && defined(CONFIG_PROC_FS)
-static int g_read_completed;
-
-/*
- * Read system PM registers for debugging
- */
-static int omap_pm_read_proc(
- char *page_buffer,
- char **my_first_byte,
- off_t virtual_start,
- int length,
- int *eof,
- void *data)
-{
- int my_buffer_offset = 0;
- char * const my_base = page_buffer;
-
- ARM_SAVE(ARM_CKCTL);
- ARM_SAVE(ARM_IDLECT1);
- ARM_SAVE(ARM_IDLECT2);
- if (!(cpu_is_omap1510()))
- ARM_SAVE(ARM_IDLECT3);
- ARM_SAVE(ARM_EWUPCT);
- ARM_SAVE(ARM_RSTCT1);
- ARM_SAVE(ARM_RSTCT2);
- ARM_SAVE(ARM_SYSST);
-
- ULPD_SAVE(ULPD_IT_STATUS);
- ULPD_SAVE(ULPD_CLOCK_CTRL);
- ULPD_SAVE(ULPD_SOFT_REQ);
- ULPD_SAVE(ULPD_STATUS_REQ);
- ULPD_SAVE(ULPD_DPLL_CTRL);
- ULPD_SAVE(ULPD_POWER_CTRL);
-
- if (cpu_is_omap730()) {
- MPUI730_SAVE(MPUI_CTRL);
- MPUI730_SAVE(MPUI_DSP_STATUS);
- MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
- MPUI730_SAVE(MPUI_DSP_API_CONFIG);
- MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
- MPUI730_SAVE(EMIFS_CONFIG);
- } else if (cpu_is_omap1510()) {
- MPUI1510_SAVE(MPUI_CTRL);
- MPUI1510_SAVE(MPUI_DSP_STATUS);
- MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
- MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
- MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
- MPUI1510_SAVE(EMIFS_CONFIG);
- } else if (cpu_is_omap16xx()) {
- MPUI1610_SAVE(MPUI_CTRL);
- MPUI1610_SAVE(MPUI_DSP_STATUS);
- MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
- MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
- MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
- MPUI1610_SAVE(EMIFS_CONFIG);
- }
-
- if (virtual_start == 0) {
- g_read_completed = 0;
-
- my_buffer_offset += sprintf(my_base + my_buffer_offset,
- "ARM_CKCTL_REG: 0x%-8x \n"
- "ARM_IDLECT1_REG: 0x%-8x \n"
- "ARM_IDLECT2_REG: 0x%-8x \n"
- "ARM_IDLECT3_REG: 0x%-8x \n"
- "ARM_EWUPCT_REG: 0x%-8x \n"
- "ARM_RSTCT1_REG: 0x%-8x \n"
- "ARM_RSTCT2_REG: 0x%-8x \n"
- "ARM_SYSST_REG: 0x%-8x \n"
- "ULPD_IT_STATUS_REG: 0x%-4x \n"
- "ULPD_CLOCK_CTRL_REG: 0x%-4x \n"
- "ULPD_SOFT_REQ_REG: 0x%-4x \n"
- "ULPD_DPLL_CTRL_REG: 0x%-4x \n"
- "ULPD_STATUS_REQ_REG: 0x%-4x \n"
- "ULPD_POWER_CTRL_REG: 0x%-4x \n",
- ARM_SHOW(ARM_CKCTL),
- ARM_SHOW(ARM_IDLECT1),
- ARM_SHOW(ARM_IDLECT2),
- ARM_SHOW(ARM_IDLECT3),
- ARM_SHOW(ARM_EWUPCT),
- ARM_SHOW(ARM_RSTCT1),
- ARM_SHOW(ARM_RSTCT2),
- ARM_SHOW(ARM_SYSST),
- ULPD_SHOW(ULPD_IT_STATUS),
- ULPD_SHOW(ULPD_CLOCK_CTRL),
- ULPD_SHOW(ULPD_SOFT_REQ),
- ULPD_SHOW(ULPD_DPLL_CTRL),
- ULPD_SHOW(ULPD_STATUS_REQ),
- ULPD_SHOW(ULPD_POWER_CTRL));
-
- if (cpu_is_omap730()) {
- my_buffer_offset += sprintf(my_base + my_buffer_offset,
- "MPUI730_CTRL_REG 0x%-8x \n"
- "MPUI730_DSP_STATUS_REG: 0x%-8x \n"
- "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
- "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n"
- "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n"
- "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n",
- MPUI730_SHOW(MPUI_CTRL),
- MPUI730_SHOW(MPUI_DSP_STATUS),
- MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG),
- MPUI730_SHOW(MPUI_DSP_API_CONFIG),
- MPUI730_SHOW(EMIFF_SDRAM_CONFIG),
- MPUI730_SHOW(EMIFS_CONFIG));
- } else if (cpu_is_omap1510()) {
- my_buffer_offset += sprintf(my_base + my_buffer_offset,
- "MPUI1510_CTRL_REG 0x%-8x \n"
- "MPUI1510_DSP_STATUS_REG: 0x%-8x \n"
- "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
- "MPUI1510_DSP_API_CONFIG_REG: 0x%-8x \n"
- "MPUI1510_SDRAM_CONFIG_REG: 0x%-8x \n"
- "MPUI1510_EMIFS_CONFIG_REG: 0x%-8x \n",
- MPUI1510_SHOW(MPUI_CTRL),
- MPUI1510_SHOW(MPUI_DSP_STATUS),
- MPUI1510_SHOW(MPUI_DSP_BOOT_CONFIG),
- MPUI1510_SHOW(MPUI_DSP_API_CONFIG),
- MPUI1510_SHOW(EMIFF_SDRAM_CONFIG),
- MPUI1510_SHOW(EMIFS_CONFIG));
- } else if (cpu_is_omap16xx()) {
- my_buffer_offset += sprintf(my_base + my_buffer_offset,
- "MPUI1610_CTRL_REG 0x%-8x \n"
- "MPUI1610_DSP_STATUS_REG: 0x%-8x \n"
- "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
- "MPUI1610_DSP_API_CONFIG_REG: 0x%-8x \n"
- "MPUI1610_SDRAM_CONFIG_REG: 0x%-8x \n"
- "MPUI1610_EMIFS_CONFIG_REG: 0x%-8x \n",
- MPUI1610_SHOW(MPUI_CTRL),
- MPUI1610_SHOW(MPUI_DSP_STATUS),
- MPUI1610_SHOW(MPUI_DSP_BOOT_CONFIG),
- MPUI1610_SHOW(MPUI_DSP_API_CONFIG),
- MPUI1610_SHOW(EMIFF_SDRAM_CONFIG),
- MPUI1610_SHOW(EMIFS_CONFIG));
- }
-
- g_read_completed++;
- } else if (g_read_completed >= 1) {
- *eof = 1;
- return 0;
- }
- g_read_completed++;
-
- *my_first_byte = page_buffer;
- return my_buffer_offset;
-}
-
-static void omap_pm_init_proc(void)
-{
- struct proc_dir_entry *entry;
-
- entry = create_proc_read_entry("driver/omap_pm",
- S_IWUSR | S_IRUGO, NULL,
- omap_pm_read_proc, NULL);
-}
-
-#endif /* DEBUG && CONFIG_PROC_FS */
-
-/*
- * omap_pm_prepare - Do preliminary suspend work.
- * @state: suspend state we're entering.
- *
- */
-//#include <asm/hardware.h>
-
-static int omap_pm_prepare(suspend_state_t state)
-{
- int error = 0;
-
- switch (state)
- {
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- break;
-
- case PM_SUSPEND_DISK:
- return -ENOTSUPP;
-
- default:
- return -EINVAL;
- }
-
- return error;
-}
-
-
-/*
- * omap_pm_enter - Actually enter a sleep state.
- * @state: State we're entering.
- *
- */
-
-static int omap_pm_enter(suspend_state_t state)
-{
- switch (state)
- {
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- omap_pm_suspend();
- break;
-
- case PM_SUSPEND_DISK:
- return -ENOTSUPP;
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-
-/**
- * omap_pm_finish - Finish up suspend sequence.
- * @state: State we're coming out of.
- *
- * This is called after we wake back up (or if entering the sleep state
- * failed).
- */
-
-static int omap_pm_finish(suspend_state_t state)
-{
- return 0;
-}
-
-
-static irqreturn_t omap_wakeup_interrupt(int irq, void * dev,
- struct pt_regs * regs)
-{
- return IRQ_HANDLED;
-}
-
-static struct irqaction omap_wakeup_irq = {
- .name = "peripheral wakeup",
- .flags = IRQF_DISABLED,
- .handler = omap_wakeup_interrupt
-};
-
-
-
-static struct pm_ops omap_pm_ops ={
- .pm_disk_mode = 0,
- .prepare = omap_pm_prepare,
- .enter = omap_pm_enter,
- .finish = omap_pm_finish,
-};
-
-static int __init omap_pm_init(void)
-{
- printk("Power Management for TI OMAP.\n");
- /*
- * We copy the assembler sleep/wakeup routines to SRAM.
- * These routines need to be in SRAM as that's the only
- * memory the MPU can see when it wakes up.
- */
- if (cpu_is_omap730()) {
- omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend,
- omap730_idle_loop_suspend_sz);
- omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
- omap730_cpu_suspend_sz);
- } else if (cpu_is_omap1510()) {
- omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend,
- omap1510_idle_loop_suspend_sz);
- omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
- omap1510_cpu_suspend_sz);
- } else if (cpu_is_omap16xx()) {
- omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend,
- omap1610_idle_loop_suspend_sz);
- omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend,
- omap1610_cpu_suspend_sz);
- }
-
- if (omap_sram_idle == NULL || omap_sram_suspend == NULL) {
- printk(KERN_ERR "PM not initialized: Missing SRAM support\n");
- return -ENODEV;
- }
-
- pm_idle = omap_pm_idle;
-
- if (cpu_is_omap730())
- setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
- else if (cpu_is_omap16xx())
- setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
-
-#if 0
- /* --- BEGIN BOARD-DEPENDENT CODE --- */
- /* Sleepx mask direction */
- omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
- /* Unmask sleepx signal */
- omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
- /* --- END BOARD-DEPENDENT CODE --- */
-#endif
-
- /* Program new power ramp-up time
- * (0 for most boards since we don't lower voltage when in deep sleep)
- */
- omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3);
-
- /* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */
- omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
-
- /* Configure IDLECT3 */
- if (cpu_is_omap730())
- omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3);
- else if (cpu_is_omap16xx())
- omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
-
- pm_set_ops(&omap_pm_ops);
-
-#if defined(DEBUG) && defined(CONFIG_PROC_FS)
- omap_pm_init_proc();
-#endif
-
- if (cpu_is_omap16xx()) {
- /* configure LOW_PWR pin */
- omap_cfg_reg(T20_1610_LOW_PWR);
- }
-
- return 0;
-}
-__initcall(omap_pm_init);
-
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index e75718301b0..19014b2ff4c 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -174,10 +174,7 @@ void __init omap_map_sram(void)
if (cpu_is_omap24xx()) {
omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA;
- if (is_sram_locked())
- base = OMAP2_SRAM_PUB_PA;
- else
- base = OMAP2_SRAM_PA;
+ base = OMAP2_SRAM_PA;
base = ROUND_DOWN(base, PAGE_SIZE);
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
}
diff --git a/arch/arm/plat-omap/timer32k.c b/arch/arm/plat-omap/timer32k.c
index 281ecc7fcdf..cf6df3378d3 100644
--- a/arch/arm/plat-omap/timer32k.c
+++ b/arch/arm/plat-omap/timer32k.c
@@ -105,6 +105,8 @@ static inline unsigned long omap_32k_timer_read(int reg)
static inline void omap_32k_timer_start(unsigned long load_val)
{
+ if (!load_val)
+ load_val = 1;
omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR);
omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR);
}
@@ -192,14 +194,11 @@ unsigned long long sched_clock(void)
* issues with dynamic tick. In the dynamic tick case, we need to lock
* with irqsave.
*/
-static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
- struct pt_regs *regs)
+static inline irqreturn_t _omap_32k_timer_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
{
- unsigned long flags;
unsigned long now;
- write_seqlock_irqsave(&xtime_lock, flags);
-
omap_32k_timer_ack_irq();
now = omap_32k_sync_timer_read();
@@ -215,6 +214,23 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
* continuous timer can be overridden from pm_idle to be longer.
*/
omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t omap_32k_timer_handler(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ return _omap_32k_timer_interrupt(irq, dev_id, regs);
+}
+
+static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ unsigned long flags;
+
+ write_seqlock_irqsave(&xtime_lock, flags);
+ _omap_32k_timer_interrupt(irq, dev_id, regs);
write_sequnlock_irqrestore(&xtime_lock, flags);
return IRQ_HANDLED;
@@ -230,7 +246,15 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
*/
void omap_32k_timer_reprogram(unsigned long next_tick)
{
- omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1);
+ unsigned long ticks = JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1;
+ unsigned long now = omap_32k_sync_timer_read();
+ unsigned long idled = now - omap_32k_last_tick;
+
+ if (idled + 1 < ticks)
+ ticks -= idled;
+ else
+ ticks = 1;
+ omap_32k_timer_start(ticks);
}
static struct irqaction omap_32k_timer_irq;
@@ -252,7 +276,7 @@ static struct dyn_tick_timer omap_dyn_tick_timer = {
.enable = omap_32k_timer_enable_dyn_tick,
.disable = omap_32k_timer_disable_dyn_tick,
.reprogram = omap_32k_timer_reprogram,
- .handler = omap_32k_timer_interrupt,
+ .handler = omap_32k_timer_handler,
};
#endif /* CONFIG_NO_IDLE_HZ */
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index e1372a25311..b02af1d740f 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Mon Jun 26 22:26:08 2006
+# Last update: Sat Sep 23 13:20:43 2006
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -329,7 +329,7 @@ nimbra29x ARCH_NIMBRA29X NIMBRA29X 311
nimbra210 ARCH_NIMBRA210 NIMBRA210 312
hhp_d95xx ARCH_HHP_D95XX HHP_D95XX 313
labarm ARCH_LABARM LABARM 314
-comcerto ARCH_M825XX M825XX 315
+m825xx ARCH_M825XX M825XX 315
m7100 SA1100_M7100 M7100 316
nipc2 ARCH_NIPC2 NIPC2 317
fu7202 ARCH_FU7202 FU7202 318
@@ -857,12 +857,12 @@ osiris MACH_OSIRIS OSIRIS 842
maestro MACH_MAESTRO MAESTRO 843
tunge2 MACH_TUNGE2 TUNGE2 844
ixbbm MACH_IXBBM IXBBM 845
-mx27ads MACH_MX27 MX27 846
+mx27ads MACH_MX27ADS MX27ADS 846
ax8004 MACH_AX8004 AX8004 847
at91sam9261ek MACH_AT91SAM9261EK AT91SAM9261EK 848
loft MACH_LOFT LOFT 849
magpie MACH_MAGPIE MAGPIE 850
-mx21ads MACH_MX21 MX21 851
+mx21ads MACH_MX21ADS MX21ADS 851
mb87m3400 MACH_MB87M3400 MB87M3400 852
mguard_delta MACH_MGUARD_DELTA MGUARD_DELTA 853
davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_DVDP 854
@@ -1058,7 +1058,7 @@ akai9307 MACH_AKAI9307 AKAI9307 1044
fontaine MACH_FONTAINE FONTAINE 1045
wombat MACH_WOMBAT WOMBAT 1046
acq300 MACH_ACQ300 ACQ300 1047
-mod_270 MACH_MOD_270 MOD_270 1048
+mod272 MACH_MOD_270 MOD_270 1048
vmc_vc0820 MACH_VC0820 VC0820 1049
ani_aim MACH_ANI_AIM ANI_AIM 1050
jellyfish MACH_JELLYFISH JELLYFISH 1051
@@ -1093,3 +1093,67 @@ msm6100 MACH_MSM6100 MSM6100 1079
eti_b1 MACH_ETI_B1 ETI_B1 1080
za9l_series MACH_ZILOG_ZA9L ZILOG_ZA9L 1081
bit2440 MACH_BIT2440 BIT2440 1082
+nbi MACH_NBI NBI 1083
+smdk2443 MACH_SMDK2443 SMDK2443 1084
+vdavinci MACH_VDAVINCI VDAVINCI 1085
+atc6 MACH_ATC6 ATC6 1086
+multmdw MACH_MULTMDW MULTMDW 1087
+mba2440 MACH_MBA2440 MBA2440 1088
+ecsd MACH_ECSD ECSD 1089
+zire31 MACH_ZIRE31 ZIRE31 1090
+fsg MACH_FSG FSG 1091
+razor101 MACH_RAZOR101 RAZOR101 1092
+opera_tdm MACH_OPERA_TDM OPERA_TDM 1093
+comcerto MACH_COMCERTO COMCERTO 1094
+tb0319 MACH_TB0319 TB0319 1095
+kws8000 MACH_KWS8000 KWS8000 1096
+b2 MACH_B2 B2 1097
+lcl54 MACH_LCL54 LCL54 1098
+at91sam9260ek MACH_AT91SAM9260EK AT91SAM9260EK 1099
+glantank MACH_GLANTANK GLANTANK 1100
+n2100 MACH_N2100 N2100 1101
+n4100 MACH_N4100 N4100 1102
+rsc4 MACH_VERTICAL_RSC4 VERTICAL_RSC4 1103
+sg8100 MACH_SG8100 SG8100 1104
+im42xx MACH_IM42XX IM42XX 1105
+ftxx MACH_FTXX FTXX 1106
+lwfusion MACH_LWFUSION LWFUSION 1107
+qt2410 MACH_QT2410 QT2410 1108
+kixrp435 MACH_KIXRP435 KIXRP435 1109
+ccw9c MACH_CCW9C CCW9C 1110
+dabhs MACH_DABHS DABHS 1111
+gzmx MACH_GZMX GZMX 1112
+ipnw100ap MACH_IPNW100AP IPNW100AP 1113
+cc9p9360dev MACH_CC9P9360DEV CC9P9360DEV 1114
+cc9p9750dev MACH_CC9P9750DEV CC9P9750DEV 1115
+cc9p9360val MACH_CC9P9360VAL CC9P9360VAL 1116
+cc9p9750val MACH_CC9P9750VAL CC9P9750VAL 1117
+nx70v MACH_NX70V NX70V 1118
+at91rm9200df MACH_AT91RM9200DF AT91RM9200DF 1119
+se_pilot2 MACH_SE_PILOT2 SE_PILOT2 1120
+mtcn_t800 MACH_MTCN_T800 MTCN_T800 1121
+vcmx212 MACH_VCMX212 VCMX212 1122
+lynx MACH_LYNX LYNX 1123
+at91sam9260id MACH_AT91SAM9260ID AT91SAM9260ID 1124
+hw86052 MACH_HW86052 HW86052 1125
+pilz_pmi3 MACH_PILZ_PMI3 PILZ_PMI3 1126
+edb9302a MACH_EDB9302A EDB9302A 1127
+edb9307a MACH_EDB9307A EDB9307A 1128
+ct_dfs MACH_CT_DFS CT_DFS 1129
+pilz_pmi4 MACH_PILZ_PMI4 PILZ_PMI4 1130
+xceednp_ixp MACH_XCEEDNP_IXP XCEEDNP_IXP 1131
+smdk2442b MACH_SMDK2442B SMDK2442B 1132
+xnode MACH_XNODE XNODE 1133
+aidx270 MACH_AIDX270 AIDX270 1134
+rema MACH_REMA REMA 1135
+bps1000 MACH_BPS1000 BPS1000 1136
+hw90350 MACH_HW90350 HW90350 1137
+omap_sdp3430 MACH_OMAP_SDP3430 OMAP_SDP3430 1138
+bluetouch MACH_BLUETOUCH BLUETOUCH 1139
+vstms MACH_VSTMS VSTMS 1140
+xsbase270 MACH_XSBASE270 XSBASE270 1141
+at91sam9260ek_cn MACH_AT91SAM9260EK_CN AT91SAM9260EK_CN 1142
+adsturboxb MACH_ADSTURBOXB ADSTURBOXB 1143
+oti4110 MACH_OTI4110 OTI4110 1144
+hme_pxa MACH_HME_PXA HME_PXA 1145
+deisterdca MACH_DEISTERDCA DEISTERDCA 1146
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index 96fdf30f6a3..f2797896e6d 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -355,3 +355,18 @@ u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand);
* we check for an error.
*/
#define VFP_EXCEPTION_ERROR ((u32)-1 & ~VFP_NAN_FLAG)
+
+/*
+ * A flag to tell vfp instruction type.
+ * OP_SCALAR - this operation always operates in scalar mode
+ * OP_SD - the instruction exceptionally writes to a single precision result.
+ * OP_DD - the instruction exceptionally writes to a double precision result.
+ */
+#define OP_SCALAR (1 << 0)
+#define OP_SD (1 << 1)
+#define OP_DD (1 << 1)
+
+struct op {
+ u32 (* const fn)(int dd, int dn, int dm, u32 fpscr);
+ u32 flags;
+};
diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c
index add48e36c2d..4fc05ee0a2e 100644
--- a/arch/arm/vfp/vfpdouble.c
+++ b/arch/arm/vfp/vfpdouble.c
@@ -659,22 +659,22 @@ static u32 vfp_double_ftosiz(int dd, int unused, int dm, u32 fpscr)
}
-static u32 (* const fop_extfns[32])(int dd, int unused, int dm, u32 fpscr) = {
- [FEXT_TO_IDX(FEXT_FCPY)] = vfp_double_fcpy,
- [FEXT_TO_IDX(FEXT_FABS)] = vfp_double_fabs,
- [FEXT_TO_IDX(FEXT_FNEG)] = vfp_double_fneg,
- [FEXT_TO_IDX(FEXT_FSQRT)] = vfp_double_fsqrt,
- [FEXT_TO_IDX(FEXT_FCMP)] = vfp_double_fcmp,
- [FEXT_TO_IDX(FEXT_FCMPE)] = vfp_double_fcmpe,
- [FEXT_TO_IDX(FEXT_FCMPZ)] = vfp_double_fcmpz,
- [FEXT_TO_IDX(FEXT_FCMPEZ)] = vfp_double_fcmpez,
- [FEXT_TO_IDX(FEXT_FCVT)] = vfp_double_fcvts,
- [FEXT_TO_IDX(FEXT_FUITO)] = vfp_double_fuito,
- [FEXT_TO_IDX(FEXT_FSITO)] = vfp_double_fsito,
- [FEXT_TO_IDX(FEXT_FTOUI)] = vfp_double_ftoui,
- [FEXT_TO_IDX(FEXT_FTOUIZ)] = vfp_double_ftouiz,
- [FEXT_TO_IDX(FEXT_FTOSI)] = vfp_double_ftosi,
- [FEXT_TO_IDX(FEXT_FTOSIZ)] = vfp_double_ftosiz,
+static struct op fops_ext[32] = {
+ [FEXT_TO_IDX(FEXT_FCPY)] = { vfp_double_fcpy, 0 },
+ [FEXT_TO_IDX(FEXT_FABS)] = { vfp_double_fabs, 0 },
+ [FEXT_TO_IDX(FEXT_FNEG)] = { vfp_double_fneg, 0 },
+ [FEXT_TO_IDX(FEXT_FSQRT)] = { vfp_double_fsqrt, 0 },
+ [FEXT_TO_IDX(FEXT_FCMP)] = { vfp_double_fcmp, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FCMPE)] = { vfp_double_fcmpe, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FCMPZ)] = { vfp_double_fcmpz, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FCMPEZ)] = { vfp_double_fcmpez, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FCVT)] = { vfp_double_fcvts, OP_SCALAR|OP_SD },
+ [FEXT_TO_IDX(FEXT_FUITO)] = { vfp_double_fuito, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FSITO)] = { vfp_double_fsito, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FTOUI)] = { vfp_double_ftoui, OP_SCALAR|OP_SD },
+ [FEXT_TO_IDX(FEXT_FTOUIZ)] = { vfp_double_ftouiz, OP_SCALAR|OP_SD },
+ [FEXT_TO_IDX(FEXT_FTOSI)] = { vfp_double_ftosi, OP_SCALAR|OP_SD },
+ [FEXT_TO_IDX(FEXT_FTOSIZ)] = { vfp_double_ftosiz, OP_SCALAR|OP_SD },
};
@@ -1108,16 +1108,16 @@ static u32 vfp_double_fdiv(int dd, int dn, int dm, u32 fpscr)
return FPSCR_IOC;
}
-static u32 (* const fop_fns[16])(int dd, int dn, int dm, u32 fpscr) = {
- [FOP_TO_IDX(FOP_FMAC)] = vfp_double_fmac,
- [FOP_TO_IDX(FOP_FNMAC)] = vfp_double_fnmac,
- [FOP_TO_IDX(FOP_FMSC)] = vfp_double_fmsc,
- [FOP_TO_IDX(FOP_FNMSC)] = vfp_double_fnmsc,
- [FOP_TO_IDX(FOP_FMUL)] = vfp_double_fmul,
- [FOP_TO_IDX(FOP_FNMUL)] = vfp_double_fnmul,
- [FOP_TO_IDX(FOP_FADD)] = vfp_double_fadd,
- [FOP_TO_IDX(FOP_FSUB)] = vfp_double_fsub,
- [FOP_TO_IDX(FOP_FDIV)] = vfp_double_fdiv,
+static struct op fops[16] = {
+ [FOP_TO_IDX(FOP_FMAC)] = { vfp_double_fmac, 0 },
+ [FOP_TO_IDX(FOP_FNMAC)] = { vfp_double_fnmac, 0 },
+ [FOP_TO_IDX(FOP_FMSC)] = { vfp_double_fmsc, 0 },
+ [FOP_TO_IDX(FOP_FNMSC)] = { vfp_double_fnmsc, 0 },
+ [FOP_TO_IDX(FOP_FMUL)] = { vfp_double_fmul, 0 },
+ [FOP_TO_IDX(FOP_FNMUL)] = { vfp_double_fnmul, 0 },
+ [FOP_TO_IDX(FOP_FADD)] = { vfp_double_fadd, 0 },
+ [FOP_TO_IDX(FOP_FSUB)] = { vfp_double_fsub, 0 },
+ [FOP_TO_IDX(FOP_FDIV)] = { vfp_double_fdiv, 0 },
};
#define FREG_BANK(x) ((x) & 0x0c)
@@ -1131,69 +1131,60 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr)
unsigned int dn = vfp_get_dn(inst);
unsigned int dm = vfp_get_dm(inst);
unsigned int vecitr, veclen, vecstride;
- u32 (*fop)(int, int, s32, u32);
+ struct op *fop;
- veclen = fpscr & FPSCR_LENGTH_MASK;
vecstride = (1 + ((fpscr & FPSCR_STRIDE_MASK) == FPSCR_STRIDE_MASK)) * 2;
+ fop = (op == FOP_EXT) ? &fops_ext[FEXT_TO_IDX(inst)] : &fops[FOP_TO_IDX(op)];
+
/*
* fcvtds takes an sN register number as destination, not dN.
* It also always operates on scalars.
*/
- if ((inst & FEXT_MASK) == FEXT_FCVT) {
- veclen = 0;
+ if (fop->flags & OP_SD)
dest = vfp_get_sd(inst);
- } else
+ else
dest = vfp_get_dd(inst);
/*
* If destination bank is zero, vector length is always '1'.
* ARM DDI0100F C5.1.3, C5.3.2.
*/
- if (FREG_BANK(dest) == 0)
+ if ((fop->flags & OP_SCALAR) || (FREG_BANK(dest) == 0))
veclen = 0;
+ else
+ veclen = fpscr & FPSCR_LENGTH_MASK;
pr_debug("VFP: vecstride=%u veclen=%u\n", vecstride,
(veclen >> FPSCR_LENGTH_BIT) + 1);
- fop = (op == FOP_EXT) ? fop_extfns[FEXT_TO_IDX(inst)] : fop_fns[FOP_TO_IDX(op)];
- if (!fop)
+ if (!fop->fn)
goto invalid;
for (vecitr = 0; vecitr <= veclen; vecitr += 1 << FPSCR_LENGTH_BIT) {
u32 except;
+ char type;
- if (op == FOP_EXT && (inst & FEXT_MASK) == FEXT_FCVT)
- pr_debug("VFP: itr%d (s%u) = op[%u] (d%u)\n",
- vecitr >> FPSCR_LENGTH_BIT,
- dest, dn, dm);
- else if (op == FOP_EXT)
- pr_debug("VFP: itr%d (d%u) = op[%u] (d%u)\n",
+ type = fop->flags & OP_SD ? 's' : 'd';
+ if (op == FOP_EXT)
+ pr_debug("VFP: itr%d (%c%u) = op[%u] (d%u)\n",
vecitr >> FPSCR_LENGTH_BIT,
- dest, dn, dm);
+ type, dest, dn, dm);
else
- pr_debug("VFP: itr%d (d%u) = (d%u) op[%u] (d%u)\n",
+ pr_debug("VFP: itr%d (%c%u) = (d%u) op[%u] (d%u)\n",
vecitr >> FPSCR_LENGTH_BIT,
- dest, dn, FOP_TO_IDX(op), dm);
+ type, dest, dn, FOP_TO_IDX(op), dm);
- except = fop(dest, dn, dm, fpscr);
+ except = fop->fn(dest, dn, dm, fpscr);
pr_debug("VFP: itr%d: exceptions=%08x\n",
vecitr >> FPSCR_LENGTH_BIT, except);
exceptions |= except;
/*
- * This ensures that comparisons only operate on scalars;
- * comparisons always return with one FPSCR status bit set.
- */
- if (except & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
- break;
-
- /*
* CHECK: It appears to be undefined whether we stop when
* we encounter an exception. We continue.
*/
-
dest = FREG_BANK(dest) + ((FREG_IDX(dest) + vecstride) & 6);
dn = FREG_BANK(dn) + ((FREG_IDX(dn) + vecstride) & 6);
if (FREG_BANK(dm) != 0)
diff --git a/arch/arm/vfp/vfpinstr.h b/arch/arm/vfp/vfpinstr.h
index 6c819aeae00..7f343a4beca 100644
--- a/arch/arm/vfp/vfpinstr.h
+++ b/arch/arm/vfp/vfpinstr.h
@@ -73,14 +73,14 @@
#define fmrx(_vfp_) ({ \
u32 __v; \
- asm("mrc%? p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmrx %0, " #_vfp_ \
- : "=r" (__v)); \
+ asm("mrc p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmrx %0, " #_vfp_ \
+ : "=r" (__v) : : "cc"); \
__v; \
})
#define fmxr(_vfp_,_var_) \
- asm("mcr%? p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmxr " #_vfp_ ", %0" \
- : : "r" (_var_))
+ asm("mcr p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmxr " #_vfp_ ", %0" \
+ : : "r" (_var_) : "cc")
u32 vfp_single_cpdo(u32 inst, u32 fpscr);
u32 vfp_single_cprt(u32 inst, u32 fpscr, struct pt_regs *regs);
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 4178f6cc3d3..dedbb449632 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -40,10 +40,19 @@ unsigned int VFP_arch;
static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
{
struct thread_info *thread = v;
- union vfp_state *vfp = &thread->vfpstate;
+ union vfp_state *vfp;
- switch (cmd) {
- case THREAD_NOTIFY_FLUSH:
+ if (likely(cmd == THREAD_NOTIFY_SWITCH)) {
+ /*
+ * Always disable VFP so we can lazily save/restore the
+ * old state.
+ */
+ fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE);
+ return NOTIFY_DONE;
+ }
+
+ vfp = &thread->vfpstate;
+ if (cmd == THREAD_NOTIFY_FLUSH) {
/*
* Per-thread VFP initialisation.
*/
@@ -56,29 +65,12 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
* Disable VFP to ensure we initialise it first.
*/
fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE);
-
- /*
- * FALLTHROUGH: Ensure we don't try to overwrite our newly
- * initialised state information on the first fault.
- */
-
- case THREAD_NOTIFY_RELEASE:
- /*
- * Per-thread VFP cleanup.
- */
- if (last_VFP_context == vfp)
- last_VFP_context = NULL;
- break;
-
- case THREAD_NOTIFY_SWITCH:
- /*
- * Always disable VFP so we can lazily save/restore the
- * old state.
- */
- fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE);
- break;
}
+ /* flush and release case: Per-thread VFP cleanup. */
+ if (last_VFP_context == vfp)
+ last_VFP_context = NULL;
+
return NOTIFY_DONE;
}
diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c
index 8f6c179cafb..ab5e9503bae 100644
--- a/arch/arm/vfp/vfpsingle.c
+++ b/arch/arm/vfp/vfpsingle.c
@@ -702,22 +702,22 @@ static u32 vfp_single_ftosiz(int sd, int unused, s32 m, u32 fpscr)
return vfp_single_ftosi(sd, unused, m, FPSCR_ROUND_TOZERO);
}
-static u32 (* const fop_extfns[32])(int sd, int unused, s32 m, u32 fpscr) = {
- [FEXT_TO_IDX(FEXT_FCPY)] = vfp_single_fcpy,
- [FEXT_TO_IDX(FEXT_FABS)] = vfp_single_fabs,
- [FEXT_TO_IDX(FEXT_FNEG)] = vfp_single_fneg,
- [FEXT_TO_IDX(FEXT_FSQRT)] = vfp_single_fsqrt,
- [FEXT_TO_IDX(FEXT_FCMP)] = vfp_single_fcmp,
- [FEXT_TO_IDX(FEXT_FCMPE)] = vfp_single_fcmpe,
- [FEXT_TO_IDX(FEXT_FCMPZ)] = vfp_single_fcmpz,
- [FEXT_TO_IDX(FEXT_FCMPEZ)] = vfp_single_fcmpez,
- [FEXT_TO_IDX(FEXT_FCVT)] = vfp_single_fcvtd,
- [FEXT_TO_IDX(FEXT_FUITO)] = vfp_single_fuito,
- [FEXT_TO_IDX(FEXT_FSITO)] = vfp_single_fsito,
- [FEXT_TO_IDX(FEXT_FTOUI)] = vfp_single_ftoui,
- [FEXT_TO_IDX(FEXT_FTOUIZ)] = vfp_single_ftouiz,
- [FEXT_TO_IDX(FEXT_FTOSI)] = vfp_single_ftosi,
- [FEXT_TO_IDX(FEXT_FTOSIZ)] = vfp_single_ftosiz,
+static struct op fops_ext[32] = {
+ [FEXT_TO_IDX(FEXT_FCPY)] = { vfp_single_fcpy, 0 },
+ [FEXT_TO_IDX(FEXT_FABS)] = { vfp_single_fabs, 0 },
+ [FEXT_TO_IDX(FEXT_FNEG)] = { vfp_single_fneg, 0 },
+ [FEXT_TO_IDX(FEXT_FSQRT)] = { vfp_single_fsqrt, 0 },
+ [FEXT_TO_IDX(FEXT_FCMP)] = { vfp_single_fcmp, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FCMPE)] = { vfp_single_fcmpe, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FCMPZ)] = { vfp_single_fcmpz, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FCMPEZ)] = { vfp_single_fcmpez, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FCVT)] = { vfp_single_fcvtd, OP_SCALAR|OP_DD },
+ [FEXT_TO_IDX(FEXT_FUITO)] = { vfp_single_fuito, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FSITO)] = { vfp_single_fsito, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FTOUI)] = { vfp_single_ftoui, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FTOUIZ)] = { vfp_single_ftouiz, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FTOSI)] = { vfp_single_ftosi, OP_SCALAR },
+ [FEXT_TO_IDX(FEXT_FTOSIZ)] = { vfp_single_ftosiz, OP_SCALAR },
};
@@ -1151,16 +1151,16 @@ static u32 vfp_single_fdiv(int sd, int sn, s32 m, u32 fpscr)
return FPSCR_IOC;
}
-static u32 (* const fop_fns[16])(int sd, int sn, s32 m, u32 fpscr) = {
- [FOP_TO_IDX(FOP_FMAC)] = vfp_single_fmac,
- [FOP_TO_IDX(FOP_FNMAC)] = vfp_single_fnmac,
- [FOP_TO_IDX(FOP_FMSC)] = vfp_single_fmsc,
- [FOP_TO_IDX(FOP_FNMSC)] = vfp_single_fnmsc,
- [FOP_TO_IDX(FOP_FMUL)] = vfp_single_fmul,
- [FOP_TO_IDX(FOP_FNMUL)] = vfp_single_fnmul,
- [FOP_TO_IDX(FOP_FADD)] = vfp_single_fadd,
- [FOP_TO_IDX(FOP_FSUB)] = vfp_single_fsub,
- [FOP_TO_IDX(FOP_FDIV)] = vfp_single_fdiv,
+static struct op fops[16] = {
+ [FOP_TO_IDX(FOP_FMAC)] = { vfp_single_fmac, 0 },
+ [FOP_TO_IDX(FOP_FNMAC)] = { vfp_single_fnmac, 0 },
+ [FOP_TO_IDX(FOP_FMSC)] = { vfp_single_fmsc, 0 },
+ [FOP_TO_IDX(FOP_FNMSC)] = { vfp_single_fnmsc, 0 },
+ [FOP_TO_IDX(FOP_FMUL)] = { vfp_single_fmul, 0 },
+ [FOP_TO_IDX(FOP_FNMUL)] = { vfp_single_fnmul, 0 },
+ [FOP_TO_IDX(FOP_FADD)] = { vfp_single_fadd, 0 },
+ [FOP_TO_IDX(FOP_FSUB)] = { vfp_single_fsub, 0 },
+ [FOP_TO_IDX(FOP_FDIV)] = { vfp_single_fdiv, 0 },
};
#define FREG_BANK(x) ((x) & 0x18)
@@ -1174,70 +1174,63 @@ u32 vfp_single_cpdo(u32 inst, u32 fpscr)
unsigned int sn = vfp_get_sn(inst);
unsigned int sm = vfp_get_sm(inst);
unsigned int vecitr, veclen, vecstride;
- u32 (*fop)(int, int, s32, u32);
+ struct op *fop;
- veclen = fpscr & FPSCR_LENGTH_MASK;
vecstride = 1 + ((fpscr & FPSCR_STRIDE_MASK) == FPSCR_STRIDE_MASK);
+ fop = (op == FOP_EXT) ? &fops_ext[FEXT_TO_IDX(inst)] : &fops[FOP_TO_IDX(op)];
+
/*
* fcvtsd takes a dN register number as destination, not sN.
* Technically, if bit 0 of dd is set, this is an invalid
* instruction. However, we ignore this for efficiency.
* It also only operates on scalars.
*/
- if ((inst & FEXT_MASK) == FEXT_FCVT) {
- veclen = 0;
+ if (fop->flags & OP_DD)
dest = vfp_get_dd(inst);
- } else
+ else
dest = vfp_get_sd(inst);
/*
* If destination bank is zero, vector length is always '1'.
* ARM DDI0100F C5.1.3, C5.3.2.
*/
- if (FREG_BANK(dest) == 0)
+ if ((fop->flags & OP_SCALAR) || FREG_BANK(dest) == 0)
veclen = 0;
+ else
+ veclen = fpscr & FPSCR_LENGTH_MASK;
pr_debug("VFP: vecstride=%u veclen=%u\n", vecstride,
(veclen >> FPSCR_LENGTH_BIT) + 1);
- fop = (op == FOP_EXT) ? fop_extfns[FEXT_TO_IDX(inst)] : fop_fns[FOP_TO_IDX(op)];
- if (!fop)
+ if (!fop->fn)
goto invalid;
for (vecitr = 0; vecitr <= veclen; vecitr += 1 << FPSCR_LENGTH_BIT) {
s32 m = vfp_get_float(sm);
u32 except;
+ char type;
- if (op == FOP_EXT && (inst & FEXT_MASK) == FEXT_FCVT)
- pr_debug("VFP: itr%d (d%u) = op[%u] (s%u=%08x)\n",
- vecitr >> FPSCR_LENGTH_BIT, dest, sn, sm, m);
- else if (op == FOP_EXT)
- pr_debug("VFP: itr%d (s%u) = op[%u] (s%u=%08x)\n",
- vecitr >> FPSCR_LENGTH_BIT, dest, sn, sm, m);
+ type = fop->flags & OP_DD ? 'd' : 's';
+ if (op == FOP_EXT)
+ pr_debug("VFP: itr%d (%c%u) = op[%u] (s%u=%08x)\n",
+ vecitr >> FPSCR_LENGTH_BIT, type, dest, sn,
+ sm, m);
else
- pr_debug("VFP: itr%d (s%u) = (s%u) op[%u] (s%u=%08x)\n",
- vecitr >> FPSCR_LENGTH_BIT, dest, sn,
+ pr_debug("VFP: itr%d (%c%u) = (s%u) op[%u] (s%u=%08x)\n",
+ vecitr >> FPSCR_LENGTH_BIT, type, dest, sn,
FOP_TO_IDX(op), sm, m);
- except = fop(dest, sn, m, fpscr);
+ except = fop->fn(dest, sn, m, fpscr);
pr_debug("VFP: itr%d: exceptions=%08x\n",
vecitr >> FPSCR_LENGTH_BIT, except);
exceptions |= except;
/*
- * This ensures that comparisons only operate on scalars;
- * comparisons always return with one FPSCR status bit set.
- */
- if (except & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
- break;
-
- /*
* CHECK: It appears to be undefined whether we stop when
* we encounter an exception. We continue.
*/
-
dest = FREG_BANK(dest) + ((FREG_IDX(dest) + vecstride) & 7);
sn = FREG_BANK(sn) + ((FREG_IDX(sn) + vecstride) & 7);
if (FREG_BANK(sm) != 0)