aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/powerpc/Kconfig13
-rw-r--r--arch/powerpc/Makefile9
-rw-r--r--arch/powerpc/boot/crt0.S23
-rw-r--r--arch/powerpc/configs/ppc64_defconfig (renamed from arch/ppc64/defconfig)346
-rw-r--r--arch/powerpc/configs/pseries_defconfig1
-rw-r--r--arch/powerpc/kernel/Makefile7
-rw-r--r--arch/powerpc/kernel/align.c (renamed from arch/ppc64/kernel/align.c)394
-rw-r--r--arch/powerpc/kernel/idle_64.c (renamed from arch/ppc64/kernel/idle.c)0
-rw-r--r--arch/powerpc/kernel/misc_32.S8
-rw-r--r--arch/powerpc/kernel/nvram_64.c (renamed from arch/ppc64/kernel/nvram.c)0
-rw-r--r--arch/powerpc/kernel/rtas-rtc.c6
-rw-r--r--arch/powerpc/kernel/time.c28
-rw-r--r--arch/powerpc/platforms/chrp/setup.c11
-rw-r--r--arch/powerpc/platforms/chrp/smp.c1
-rw-r--r--arch/powerpc/platforms/chrp/time.c3
-rw-r--r--arch/powerpc/platforms/maple/time.c11
-rw-r--r--arch/powerpc/platforms/pseries/eeh.c3
-rw-r--r--arch/powerpc/platforms/pseries/setup.c4
-rw-r--r--arch/ppc/kernel/Makefile4
-rw-r--r--arch/ppc/kernel/align.c410
-rw-r--r--arch/ppc/kernel/pci.c1
-rw-r--r--arch/ppc/syslib/mpc83xx_sys.c28
-rw-r--r--arch/ppc64/Kconfig.debug65
-rw-r--r--arch/ppc64/Makefile142
-rw-r--r--arch/ppc64/configs/bpa_defconfig1024
-rw-r--r--arch/ppc64/configs/g5_defconfig1392
-rw-r--r--arch/ppc64/configs/iSeries_defconfig998
-rw-r--r--arch/ppc64/configs/maple_defconfig1062
-rw-r--r--arch/ppc64/configs/pSeries_defconfig1371
-rw-r--r--arch/ppc64/kernel/Makefile7
30 files changed, 611 insertions, 6761 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 94df74bcc0e..bb2efdd566a 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -598,19 +598,6 @@ config ARCH_MEMORY_PROBE
def_bool y
depends on MEMORY_HOTPLUG
-# Some NUMA nodes have memory ranges that span
-# other nodes. Even though a pfn is valid and
-# between a node's start and end pfns, it may not
-# reside on that node.
-#
-# This is a relatively temporary hack that should
-# be able to go away when sparsemem is fully in
-# place
-
-config NODES_SPAN_OTHER_NODES
- def_bool y
- depends on NEED_MULTIPLE_NODES
-
config PPC_64K_PAGES
bool "64k page size"
depends on PPC64
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 99dbea8c5c5..98f67c78d1b 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -33,6 +33,8 @@ endif
export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY
+KBUILD_DEFCONFIG := $(shell uname -m)_defconfig
+
ifeq ($(CONFIG_PPC64),y)
OLDARCH := ppc64
SZ := 64
@@ -111,9 +113,6 @@ cpu-as-$(CONFIG_E200) += -Wa,-me200
AFLAGS += $(cpu-as-y)
CFLAGS += $(cpu-as-y)
-# Default to the common case.
-KBUILD_DEFCONFIG := common_defconfig
-
head-y := arch/powerpc/kernel/head_32.o
head-$(CONFIG_PPC64) := arch/powerpc/kernel/head_64.o
head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o
@@ -125,11 +124,11 @@ head-$(CONFIG_PPC64) += arch/powerpc/kernel/entry_64.o
head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o
core-y += arch/powerpc/kernel/ \
- arch/$(OLDARCH)/kernel/ \
arch/powerpc/mm/ \
arch/powerpc/lib/ \
arch/powerpc/sysdev/ \
arch/powerpc/platforms/
+core-$(CONFIG_PPC32) += arch/ppc/kernel/
core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/
core-$(CONFIG_XMON) += arch/powerpc/xmon/
core-$(CONFIG_APUS) += arch/ppc/amiga/
@@ -165,7 +164,7 @@ define archhelp
@echo ' (your) ~/bin/installkernel or'
@echo ' (distribution) /sbin/installkernel or'
@echo ' install to $$(INSTALL_PATH) and run lilo'
- @echo ' *_defconfig - Select default config from arch/$(ARCH)/ppc/configs'
+ @echo ' *_defconfig - Select default config from arch/$(ARCH)/configs'
endef
archclean:
diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S
index 9cc44226393..d2f2ace56cd 100644
--- a/arch/powerpc/boot/crt0.S
+++ b/arch/powerpc/boot/crt0.S
@@ -14,43 +14,42 @@
.text
.globl _zimage_start
_zimage_start:
- bl reloc_offset
+ bl 1f
-reloc_offset:
+1:
mflr r0
- lis r9,reloc_offset@ha
- addi r9,r9,reloc_offset@l
+ lis r9,1b@ha
+ addi r9,r9,1b@l
subf. r0,r9,r0
- beq clear_caches
+ beq 3f
-reloc_got2:
lis r9,__got2_start@ha
addi r9,r9,__got2_start@l
lis r8,__got2_end@ha
addi r8,r8,__got2_end@l
subf. r8,r9,r8
- beq clear_caches
+ beq 3f
srwi. r8,r8,2
mtctr r8
add r9,r0,r9
-reloc_got2_loop:
+2:
lwz r8,0(r9)
add r8,r8,r0
stw r8,0(r9)
addi r9,r9,4
- bdnz reloc_got2_loop
+ bdnz 2b
-clear_caches:
+3:
lis r9,_start@h
add r9,r0,r9
lis r8,_etext@ha
addi r8,r8,_etext@l
add r8,r0,r8
-1: dcbf r0,r9
+4: dcbf r0,r9
icbi r0,r9
addi r9,r9,0x20
cmplwi 0,r9,8
- blt 1b
+ blt 4b
sync
isync
diff --git a/arch/ppc64/defconfig b/arch/powerpc/configs/ppc64_defconfig
index e79fd60bc12..b5ba3bbd96f 100644
--- a/arch/ppc64/defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,18 +1,33 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:28:33 2005
+# Linux kernel version: 2.6.15-rc1
+# Fri Nov 18 16:23:24 2005
#
+CONFIG_PPC64=y
CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+
+#
+# Processor support
+#
+# CONFIG_POWER4_ONLY is not set
+CONFIG_POWER3=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=32
#
# Code maturity level options
@@ -41,7 +56,7 @@ CONFIG_CPUSETS=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -67,78 +82,115 @@ CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Platform support
#
-# CONFIG_PPC_ISERIES is not set
CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
CONFIG_PPC_PSERIES=y
-CONFIG_PPC_BPA=y
CONFIG_PPC_PMAC=y
+CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
-CONFIG_PPC=y
-CONFIG_PPC64=y
+# CONFIG_PPC_CELL is not set
CONFIG_PPC_OF=y
CONFIG_XICS=y
-CONFIG_MPIC=y
-CONFIG_BPA_IIC=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_SPLPAR=y
-CONFIG_KEXEC=y
-CONFIG_IBMVIO=y
CONFIG_U3_DART=y
+CONFIG_MPIC=y
+CONFIG_PPC_RTAS=y
+CONFIG_RTAS_ERROR_LOGGING=y
+CONFIG_RTAS_PROC=y
+CONFIG_RTAS_FLASH=m
+# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
-CONFIG_PPC_PMAC64=y
-CONFIG_BOOTX_TEXT=y
-# CONFIG_POWER4_ONLY is not set
+CONFIG_IBMVIO=y
+# CONFIG_PPC_MPC106 is not set
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_PMAC64=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=32
+CONFIG_HOTPLUG_CPU=y
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_PPC_SPLPAR=y
+CONFIG_EEH=y
+CONFIG_SCANLOG=m
+CONFIG_LPARCFG=y
+# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
-# CONFIG_NUMA is not set
+CONFIG_SPARSEMEM_EXTREME=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_EEH=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=m
-CONFIG_SCANLOG=m
-CONFIG_LPARCFG=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_HOTPLUG_CPU=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
-# Bus Options
+# Bus options
#
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_I8259=y
+# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_LEGACY_PROC is not set
@@ -158,6 +210,7 @@ CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
+CONFIG_KERNEL_START=0xc000000000000000
#
# Networking
@@ -199,6 +252,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
@@ -301,6 +358,10 @@ CONFIG_LLC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@@ -338,13 +399,7 @@ CONFIG_FW_LOADER=y
#
# Parallel port support
#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
+# CONFIG_PARPORT is not set
#
# Plug and Play support
@@ -354,7 +409,6 @@ CONFIG_PARPORT_PC=m
# Block devices
#
CONFIG_BLK_DEV_FD=y
-# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -370,14 +424,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
@@ -407,7 +453,7 @@ CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
+# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
@@ -479,6 +525,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -495,10 +542,12 @@ CONFIG_SCSI_SATA_SVW=y
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
@@ -512,8 +561,6 @@ CONFIG_SCSI_SATA_SVW=y
CONFIG_SCSI_IBMVSCSI=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
@@ -608,6 +655,9 @@ CONFIG_IEEE1394_AMDTP=m
CONFIG_ADB_PMU=y
CONFIG_PMAC_SMU=y
CONFIG_THERM_PM72=y
+CONFIG_WINDFARM=y
+CONFIG_WINDFARM_PM81=y
+CONFIG_WINDFARM_PM91=y
#
# Network device support
@@ -664,7 +714,6 @@ CONFIG_E100=y
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
@@ -684,7 +733,6 @@ CONFIG_E1000=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
-# CONFIG_SPIDER_NET is not set
# CONFIG_MV643XX_ETH is not set
#
@@ -714,7 +762,6 @@ CONFIG_IBMOL=y
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
@@ -722,6 +769,7 @@ CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
@@ -784,7 +832,6 @@ CONFIG_INPUT_PCSPKR=m
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
@@ -817,10 +864,6 @@ CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
CONFIG_HVC_CONSOLE=y
CONFIG_HVCS=m
@@ -834,6 +877,7 @@ CONFIG_HVCS=m
#
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -851,6 +895,7 @@ CONFIG_MAX_RAW_DEVS=256
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -879,7 +924,6 @@ CONFIG_I2C_AMD8111=y
CONFIG_I2C_KEYWEST=y
CONFIG_I2C_PMAC_SMU=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
@@ -904,6 +948,7 @@ CONFIG_I2C_PMAC_SMU=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -945,7 +990,6 @@ CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
CONFIG_FB_MACMODES=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
@@ -960,6 +1004,7 @@ CONFIG_FB_OF=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=y
@@ -983,7 +1028,6 @@ CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -992,6 +1036,7 @@ CONFIG_FB_RADEON_I2C=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@@ -1012,7 +1057,94 @@ CONFIG_LCD_DEVICE=y
#
# Sound
#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# ALSA PowerMac devices
+#
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_POWERMAC_AUTO_DRC=y
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
#
# USB support
@@ -1046,12 +1178,16 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# USB Device Class drivers
#
-# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1106,7 +1242,7 @@ CONFIG_USB_HIDDEV=y
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=y
+# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
@@ -1114,7 +1250,6 @@ CONFIG_USB_PEGASUS=y
#
# USB port drivers
#
-# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
@@ -1163,6 +1298,7 @@ CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
#
# SN Devices
@@ -1358,10 +1494,25 @@ CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
-# Profiling support
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+
+#
+# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
#
# Kernel hacking
@@ -1378,14 +1529,15 @@ CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUGGER=y
CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
-# CONFIG_PPCDBG is not set
CONFIG_IRQSTACKS=y
+CONFIG_BOOTX_TEXT=y
#
# Security options
@@ -1425,17 +1577,3 @@ CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index b4745c918a4..b589b196eb3 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -165,7 +165,6 @@ CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 4970e3721a8..9ed551b6c17 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -12,12 +12,12 @@ CFLAGS_btext.o += -fPIC
endif
obj-y := semaphore.o cputable.o ptrace.o syscalls.o \
- irq.o signal_32.o pmc.o vdso.o
+ irq.o align.o signal_32.o pmc.o vdso.o
obj-y += vdso32/
obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
signal_64.o ptrace32.o systbl.o \
paca.o ioctl32.o cpu_setup_power4.o \
- firmware.o sysfs.o udbg.o
+ firmware.o sysfs.o udbg.o idle_64.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_POWER4) += idle_power4.o
@@ -35,6 +35,7 @@ obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o
obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o
udbgscc-$(CONFIG_PPC64) := udbg_scc.o
obj-$(CONFIG_PPC_PMAC) += $(udbgscc-y)
+obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o
ifeq ($(CONFIG_PPC_MERGE),y)
@@ -78,5 +79,7 @@ smpobj-$(CONFIG_SMP) += smp.o
endif
+obj-$(CONFIG_PPC64) += $(obj64-y)
+
extra-$(CONFIG_PPC_FPU) += fpu.o
extra-$(CONFIG_PPC64) += entry_64.o
diff --git a/arch/ppc64/kernel/align.c b/arch/powerpc/kernel/align.c
index 256d5b592aa..faaec9c6f78 100644
--- a/arch/ppc64/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -7,6 +7,9 @@
* PowerPC 403GCX/405GP modifications.
* Copyright (c) 2001-2002 PPC64 team, IBM Corp
* 64-bit and Power4 support
+ * Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp
+ * <benh@kernel.crashing.org>
+ * Merge ppc32 and ppc64 implementations
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -38,10 +41,15 @@ struct aligninfo {
#define F 8 /* to/from fp regs */
#define U 0x10 /* update index register */
#define M 0x20 /* multiple load/store */
-#define SW 0x40 /* byte swap */
+#define SW 0x40 /* byte swap int or ... */
+#define S 0x40 /* ... single-precision fp */
+#define SX 0x40 /* byte count in XER */
+#define HARD 0x80 /* string, stwcx. */
#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */
+#define SWAP(a, b) (t = (a), (a) = (b), (b) = t)
+
/*
* The PowerPC stores certain bits of the instruction that caused the
* alignment exception in the DSISR register. This array maps those
@@ -57,14 +65,14 @@ static struct aligninfo aligninfo[128] = {
{ 2, LD+SE }, /* 00 0 0101: lha */
{ 2, ST }, /* 00 0 0110: sth */
{ 4, LD+M }, /* 00 0 0111: lmw */
- { 4, LD+F }, /* 00 0 1000: lfs */
+ { 4, LD+F+S }, /* 00 0 1000: lfs */
{ 8, LD+F }, /* 00 0 1001: lfd */
- { 4, ST+F }, /* 00 0 1010: stfs */
+ { 4, ST+F+S }, /* 00 0 1010: stfs */
{ 8, ST+F }, /* 00 0 1011: stfd */
INVALID, /* 00 0 1100 */
- { 8, LD }, /* 00 0 1101: ld */
+ { 8, LD }, /* 00 0 1101: ld/ldu/lwa */
INVALID, /* 00 0 1110 */
- { 8, ST }, /* 00 0 1111: std */
+ { 8, ST }, /* 00 0 1111: std/stdu */
{ 4, LD+U }, /* 00 1 0000: lwzu */
INVALID, /* 00 1 0001 */
{ 4, ST+U }, /* 00 1 0010: stwu */
@@ -73,9 +81,9 @@ static struct aligninfo aligninfo[128] = {
{ 2, LD+SE+U }, /* 00 1 0101: lhau */
{ 2, ST+U }, /* 00 1 0110: sthu */
{ 4, ST+M }, /* 00 1 0111: stmw */
- { 4, LD+F+U }, /* 00 1 1000: lfsu */
+ { 4, LD+F+S+U }, /* 00 1 1000: lfsu */
{ 8, LD+F+U }, /* 00 1 1001: lfdu */
- { 4, ST+F+U }, /* 00 1 1010: stfsu */
+ { 4, ST+F+S+U }, /* 00 1 1010: stfsu */
{ 8, ST+F+U }, /* 00 1 1011: stfdu */
INVALID, /* 00 1 1100 */
INVALID, /* 00 1 1101 */
@@ -89,10 +97,10 @@ static struct aligninfo aligninfo[128] = {
{ 4, LD+SE }, /* 01 0 0101: lwax */
INVALID, /* 01 0 0110 */
INVALID, /* 01 0 0111 */
- { 0, LD }, /* 01 0 1000: lswx */
- { 0, LD }, /* 01 0 1001: lswi */
- { 0, ST }, /* 01 0 1010: stswx */
- { 0, ST }, /* 01 0 1011: stswi */
+ { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */
+ { 4, LD+M+HARD }, /* 01 0 1001: lswi */
+ { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */
+ { 4, ST+M+HARD }, /* 01 0 1011: stswi */
INVALID, /* 01 0 1100 */
{ 8, LD+U }, /* 01 0 1101: ldu */
INVALID, /* 01 0 1110 */
@@ -115,7 +123,7 @@ static struct aligninfo aligninfo[128] = {
INVALID, /* 01 1 1111 */
INVALID, /* 10 0 0000 */
INVALID, /* 10 0 0001 */
- { 0, ST }, /* 10 0 0010: stwcx. */
+ INVALID, /* 10 0 0010: stwcx. */
INVALID, /* 10 0 0011 */
INVALID, /* 10 0 0100 */
INVALID, /* 10 0 0101 */
@@ -144,7 +152,7 @@ static struct aligninfo aligninfo[128] = {
INVALID, /* 10 1 1100 */
INVALID, /* 10 1 1101 */
INVALID, /* 10 1 1110 */
- { L1_CACHE_BYTES, ST }, /* 10 1 1111: dcbz */
+ { 0, ST+HARD }, /* 10 1 1111: dcbz */
{ 4, LD }, /* 11 0 0000: lwzx */
INVALID, /* 11 0 0001 */
{ 4, ST }, /* 11 0 0010: stwx */
@@ -153,9 +161,9 @@ static struct aligninfo aligninfo[128] = {
{ 2, LD+SE }, /* 11 0 0101: lhax */
{ 2, ST }, /* 11 0 0110: sthx */
INVALID, /* 11 0 0111 */
- { 4, LD+F }, /* 11 0 1000: lfsx */
+ { 4, LD+F+S }, /* 11 0 1000: lfsx */
{ 8, LD+F }, /* 11 0 1001: lfdx */
- { 4, ST+F }, /* 11 0 1010: stfsx */
+ { 4, ST+F+S }, /* 11 0 1010: stfsx */
{ 8, ST+F }, /* 11 0 1011: stfdx */
INVALID, /* 11 0 1100 */
{ 8, LD+M }, /* 11 0 1101: lmd */
@@ -169,9 +177,9 @@ static struct aligninfo aligninfo[128] = {
{ 2, LD+SE+U }, /* 11 1 0101: lhaux */
{ 2, ST+U }, /* 11 1 0110: sthux */
INVALID, /* 11 1 0111 */
- { 4, LD+F+U }, /* 11 1 1000: lfsux */
+ { 4, LD+F+S+U }, /* 11 1 1000: lfsux */
{ 8, LD+F+U }, /* 11 1 1001: lfdux */
- { 4, ST+F+U }, /* 11 1 1010: stfsux */
+ { 4, ST+F+S+U }, /* 11 1 1010: stfsux */
{ 8, ST+F+U }, /* 11 1 1011: stfdux */
INVALID, /* 11 1 1100 */
INVALID, /* 11 1 1101 */
@@ -179,45 +187,175 @@ static struct aligninfo aligninfo[128] = {
INVALID, /* 11 1 1111 */
};
-#define SWAP(a, b) (t = (a), (a) = (b), (b) = t)
-
+/*
+ * Create a DSISR value from the instruction
+ */
static inline unsigned make_dsisr(unsigned instr)
{
unsigned dsisr;
-
- /* create a DSISR value from the instruction */
- dsisr = (instr & 0x03ff0000) >> 16; /* bits 6:15 --> 22:31 */
-
- if ( IS_XFORM(instr) ) {
- dsisr |= (instr & 0x00000006) << 14; /* bits 29:30 --> 15:16 */
- dsisr |= (instr & 0x00000040) << 8; /* bit 25 --> 17 */
- dsisr |= (instr & 0x00000780) << 3; /* bits 21:24 --> 18:21 */
+
+
+ /* bits 6:15 --> 22:31 */
+ dsisr = (instr & 0x03ff0000) >> 16;
+
+ if (IS_XFORM(instr)) {
+ /* bits 29:30 --> 15:16 */
+ dsisr |= (instr & 0x00000006) << 14;
+ /* bit 25 --> 17 */
+ dsisr |= (instr & 0x00000040) << 8;
+ /* bits 21:24 --> 18:21 */
+ dsisr |= (instr & 0x00000780) << 3;
+ } else {
+ /* bit 5 --> 17 */
+ dsisr |= (instr & 0x04000000) >> 12;
+ /* bits 1: 4 --> 18:21 */
+ dsisr |= (instr & 0x78000000) >> 17;
+ /* bits 30:31 --> 12:13 */
+ if (IS_DSFORM(instr))
+ dsisr |= (instr & 0x00000003) << 18;
}
- else {
- dsisr |= (instr & 0x04000000) >> 12; /* bit 5 --> 17 */
- dsisr |= (instr & 0x78000000) >> 17; /* bits 1: 4 --> 18:21 */
- if ( IS_DSFORM(instr) ) {
- dsisr |= (instr & 0x00000003) << 18; /* bits 30:31 --> 12:13 */
+
+ return dsisr;
+}
+
+/*
+ * The dcbz (data cache block zero) instruction
+ * gives an alignment fault if used on non-cacheable
+ * memory. We handle the fault mainly for the
+ * case when we are running with the cache disabled
+ * for debugging.
+ */
+static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr)
+{
+ long __user *p;
+ int i, size;
+
+#ifdef __powerpc64__
+ size = ppc64_caches.dline_size;
+#else
+ size = L1_CACHE_BYTES;
+#endif
+ p = (long __user *) (regs->dar & -size);
+ if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size))
+ return -EFAULT;
+ for (i = 0; i < size / sizeof(long); ++i)
+ if (__put_user(0, p+i))
+ return -EFAULT;
+ return 1;
+}
+
+/*
+ * Emulate load & store multiple instructions
+ * On 64-bit machines, these instructions only affect/use the
+ * bottom 4 bytes of each register, and the loads clear the
+ * top 4 bytes of the affected register.
+ */
+#ifdef CONFIG_PPC64
+#define REG_BYTE(rp, i) *((u8 *)((rp) + ((i) >> 2)) + ((i) & 3) + 4)
+#else
+#define REG_BYTE(rp, i) *((u8 *)(rp) + (i))
+#endif
+
+static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
+ unsigned int reg, unsigned int nb,
+ unsigned int flags, unsigned int instr)
+{
+ unsigned long *rptr;
+ unsigned int nb0, i;
+
+ /*
+ * We do not try to emulate 8 bytes multiple as they aren't really
+ * available in our operating environments and we don't try to
+ * emulate multiples operations in kernel land as they should never
+ * be used/generated there at least not on unaligned boundaries
+ */
+ if (unlikely((nb > 4) || !user_mode(regs)))
+ return 0;
+
+ /* lmw, stmw, lswi/x, stswi/x */
+ nb0 = 0;
+ if (flags & HARD) {
+ if (flags & SX) {
+ nb = regs->xer & 127;
+ if (nb == 0)
+ return 1;
+ } else {
+ if (__get_user(instr,
+ (unsigned int __user *)regs->nip))
+ return -EFAULT;
+ nb = (instr >> 11) & 0x1f;
+ if (nb == 0)
+ nb = 32;
}
+ if (nb + reg * 4 > 128) {
+ nb0 = nb + reg * 4 - 128;
+ nb = 128 - reg * 4;
+ }
+ } else {
+ /* lwm, stmw */
+ nb = (32 - reg) * 4;
}
-
- return dsisr;
+
+ if (!access_ok((flags & ST ? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0))
+ return -EFAULT; /* bad address */
+
+ rptr = &regs->gpr[reg];
+ if (flags & LD) {
+ /*
+ * This zeroes the top 4 bytes of the affected registers
+ * in 64-bit mode, and also zeroes out any remaining
+ * bytes of the last register for lsw*.
+ */
+ memset(rptr, 0, ((nb + 3) / 4) * sizeof(unsigned long));
+ if (nb0 > 0)
+ memset(&regs->gpr[0], 0,
+ ((nb0 + 3) / 4) * sizeof(unsigned long));
+
+ for (i = 0; i < nb; ++i)
+ if (__get_user(REG_BYTE(rptr, i), addr + i))
+ return -EFAULT;
+ if (nb0 > 0) {
+ rptr = &regs->gpr[0];
+ addr += nb;
+ for (i = 0; i < nb0; ++i)
+ if (__get_user(REG_BYTE(rptr, i), addr + i))
+ return -EFAULT;
+ }
+
+ } else {
+ for (i = 0; i < nb; ++i)
+ if (__put_user(REG_BYTE(rptr, i), addr + i))
+ return -EFAULT;
+ if (nb0 > 0) {
+ rptr = &regs->gpr[0];
+ addr += nb;
+ for (i = 0; i < nb0; ++i)
+ if (__put_user(REG_BYTE(rptr, i), addr + i))
+ return -EFAULT;
+ }
+ }
+ return 1;
}
-int
-fix_alignment(struct pt_regs *regs)
+
+/*
+ * Called on alignment exception. Attempts to fixup
+ *
+ * Return 1 on success
+ * Return 0 if unable to handle the interrupt
+ * Return -EFAULT if data address is bad
+ */
+
+int fix_alignment(struct pt_regs *regs)
{
unsigned int instr, nb, flags;
- int t;
- unsigned long reg, areg;
- unsigned long i;
- int ret;
- unsigned dsisr;
+ unsigned int reg, areg;
+ unsigned int dsisr;
unsigned char __user *addr;
unsigned char __user *p;
- unsigned long __user *lp;
+ int ret, t;
union {
- long ll;
+ u64 ll;
double dd;
unsigned char v[8];
struct {
@@ -231,18 +369,22 @@ fix_alignment(struct pt_regs *regs)
} data;
/*
- * Return 1 on success
- * Return 0 if unable to handle the interrupt
- * Return -EFAULT if data address is bad
+ * We require a complete register set, if not, then our assembly
+ * is broken
*/
+ CHECK_FULL_REGS(regs);
dsisr = regs->dsisr;
+ /* Some processors don't provide us with a DSISR we can use here,
+ * let's make one up from the instruction
+ */
if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) {
- unsigned int real_instr;
- if (__get_user(real_instr, (unsigned int __user *)regs->nip))
- return 0;
- dsisr = make_dsisr(real_instr);
+ unsigned int real_instr;
+ if (unlikely(__get_user(real_instr,
+ (unsigned int __user *)regs->nip)))
+ return -EFAULT;
+ dsisr = make_dsisr(real_instr);
}
/* extract the operation and registers from the dsisr */
@@ -258,33 +400,37 @@ fix_alignment(struct pt_regs *regs)
/* DAR has the operand effective address */
addr = (unsigned char __user *)regs->dar;
- /* A size of 0 indicates an instruction we don't support */
- /* we also don't support the multiples (lmw, stmw, lmd, stmd) */
- if ((nb == 0) || (flags & M))
- return 0; /* too hard or invalid instruction */
-
- /*
- * Special handling for dcbz
- * dcbz may give an alignment exception for accesses to caching inhibited
- * storage
+ /* A size of 0 indicates an instruction we don't support, with
+ * the exception of DCBZ which is handled as a special case here
*/
if (instr == DCBZ)
- addr = (unsigned char __user *) ((unsigned long)addr & -L1_CACHE_BYTES);
+ return emulate_dcbz(regs, addr);
+ if (unlikely(nb == 0))
+ return 0;
+
+ /* Load/Store Multiple instructions are handled in their own
+ * function
+ */
+ if (flags & M)
+ return emulate_multiple(regs, addr, reg, nb, flags, instr);
/* Verify the address of the operand */
- if (user_mode(regs)) {
- if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb))
- return -EFAULT; /* bad address */
- }
+ if (unlikely(user_mode(regs) &&
+ !access_ok((flags & ST ? VERIFY_WRITE : VERIFY_READ),
+ addr, nb)))
+ return -EFAULT;
/* Force the fprs into the save area so we can reference them */
if (flags & F) {
- if (!user_mode(regs))
+ /* userland only */
+ if (unlikely(!user_mode(regs)))
return 0;
flush_fp_to_thread(current);
}
-
- /* If we are loading, get the data from user space */
+
+ /* If we are loading, get the data from user space, else
+ * get it from register values
+ */
if (flags & LD) {
data.ll = 0;
ret = 0;
@@ -301,75 +447,62 @@ fix_alignment(struct pt_regs *regs)
case 2:
ret |= __get_user(data.v[6], p++);
ret |= __get_user(data.v[7], p++);
- if (ret)
+ if (unlikely(ret))
return -EFAULT;
}
- }
-
- /* If we are storing, get the data from the saved gpr or fpr */
- if (flags & ST) {
- if (flags & F) {
- if (nb == 4) {
- /* Doing stfs, have to convert to single */
- preempt_disable();
- enable_kernel_fp();
- cvt_df(&current->thread.fpr[reg], (float *)&data.v[4], &current->thread);
- disable_kernel_fp();
- preempt_enable();
- }
- else
- data.dd = current->thread.fpr[reg];
- }
- else
- data.ll = regs->gpr[reg];
- }
-
- /* Swap bytes as needed */
- if (flags & SW) {
- if (nb == 2)
- SWAP(data.v[6], data.v[7]);
- else { /* nb must be 4 */
- SWAP(data.v[4], data.v[7]);
- SWAP(data.v[5], data.v[6]);
- }
- }
-
- /* Sign extend as needed */
- if (flags & SE) {
+ } else if (flags & F)
+ data.dd = current->thread.fpr[reg];
+ else
+ data.ll = regs->gpr[reg];
+
+ /* Perform other misc operations like sign extension, byteswap,
+ * or floating point single precision conversion
+ */
+ switch (flags & ~U) {
+ case LD+SE: /* sign extend */
if ( nb == 2 )
data.ll = data.x16.low16;
else /* nb must be 4 */
data.ll = data.x32.low32;
- }
-
- /* If we are loading, move the data to the gpr or fpr */
- if (flags & LD) {
- if (flags & F) {
- if (nb == 4) {
- /* Doing lfs, have to convert to double */
- preempt_disable();
- enable_kernel_fp();
- cvt_fd((float *)&data.v[4], &current->thread.fpr[reg], &current->thread);
- disable_kernel_fp();
- preempt_enable();
- }
- else
- current->thread.fpr[reg] = data.dd;
+ break;
+ case LD+S: /* byte-swap */
+ case ST+S:
+ if (nb == 2) {
+ SWAP(data.v[6], data.v[7]);
+ } else {
+ SWAP(data.v[4], data.v[7]);
+ SWAP(data.v[5], data.v[6]);
}
- else
- regs->gpr[reg] = data.ll;
+ break;
+
+ /* Single-precision FP load and store require conversions... */
+ case LD+F+S:
+#ifdef CONFIG_PPC_FPU
+ preempt_disable();
+ enable_kernel_fp();
+ cvt_fd((float *)&data.v[4], &data.dd, &current->thread);
+ preempt_enable();
+#else
+ return 0;
+#endif
+ break;
+ case ST+F+S:
+#ifdef CONFIG_PPC_FPU
+ preempt_disable();
+ enable_kernel_fp();
+ cvt_df(&data.dd, (float *)&data.v[4], &current->thread);
+ preempt_enable();
+#else
+ return 0;
+#endif
+ break;
}
-
- /* If we are storing, copy the data to the user */
+
+ /* Store result to memory or update registers */
if (flags & ST) {
ret = 0;
p = addr;
switch (nb) {
- case 128: /* Special case - must be dcbz */
- lp = (unsigned long __user *)p;
- for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i)
- ret |= __put_user(0, lp++);
- break;
case 8:
ret |= __put_user(data.v[0], p++);
ret |= __put_user(data.v[1], p++);
@@ -382,15 +515,16 @@ fix_alignment(struct pt_regs *regs)
ret |= __put_user(data.v[6], p++);
ret |= __put_user(data.v[7], p++);
}
- if (ret)
+ if (unlikely(ret))
return -EFAULT;
- }
-
+ } else if (flags & F)
+ current->thread.fpr[reg] = data.dd;
+ else
+ regs->gpr[reg] = data.ll;
+
/* Update RA as needed */
- if (flags & U) {
+ if (flags & U)
regs->gpr[areg] = regs->dar;
- }
return 1;
}
-
diff --git a/arch/ppc64/kernel/idle.c b/arch/powerpc/kernel/idle_64.c
index b879d3057ef..b879d3057ef 100644
--- a/arch/ppc64/kernel/idle.c
+++ b/arch/powerpc/kernel/idle_64.c
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index f6d84a75ed2..624a983a967 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -27,14 +27,6 @@
.text
- .align 5
-_GLOBAL(__delay)
- cmpwi 0,r3,0
- mtctr r3
- beqlr
-1: bdnz 1b
- blr
-
/*
* This returns the high 64 bits of the product of two 64-bit numbers.
*/
diff --git a/arch/ppc64/kernel/nvram.c b/arch/powerpc/kernel/nvram_64.c
index c0fcd29918c..c0fcd29918c 100644
--- a/arch/ppc64/kernel/nvram.c
+++ b/arch/powerpc/kernel/nvram_64.c
diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c
index 7b948662704..635d3b9a881 100644
--- a/arch/powerpc/kernel/rtas-rtc.c
+++ b/arch/powerpc/kernel/rtas-rtc.c
@@ -15,7 +15,7 @@ unsigned long __init rtas_get_boot_time(void)
{
int ret[8];
int error, wait_time;
- unsigned long max_wait_tb;
+ u64 max_wait_tb;
max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
do {
@@ -45,7 +45,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm)
{
int ret[8];
int error, wait_time;
- unsigned long max_wait_tb;
+ u64 max_wait_tb;
max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
do {
@@ -80,7 +80,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm)
int rtas_set_rtc_time(struct rtc_time *tm)
{
int error, wait_time;
- unsigned long max_wait_tb;
+ u64 max_wait_tb;
max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
do {
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 070b4b458aa..de8479769bb 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -130,6 +130,34 @@ unsigned long tb_last_stamp;
*/
DEFINE_PER_CPU(unsigned long, last_jiffy);
+void __delay(unsigned long loops)
+{
+ unsigned long start;
+ int diff;
+
+ if (__USE_RTC()) {
+ start = get_rtcl();
+ do {
+ /* the RTCL register wraps at 1000000000 */
+ diff = get_rtcl() - start;
+ if (diff < 0)
+ diff += 1000000000;
+ } while (diff < loops);
+ } else {
+ start = get_tbl();
+ while (get_tbl() - start < loops)
+ HMT_low();
+ HMT_medium();
+ }
+}
+EXPORT_SYMBOL(__delay);
+
+void udelay(unsigned long usecs)
+{
+ __delay(tb_ticks_per_usec * usecs);
+}
+EXPORT_SYMBOL(udelay);
+
static __inline__ void timer_check_rtc(void)
{
/*
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 4099ddab920..dda5f2c72c2 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -257,6 +257,13 @@ void __init chrp_setup_arch(void)
if (rtas_token("display-character") >= 0)
ppc_md.progress = rtas_progress;
+ /* use RTAS time-of-day routines if available */
+ if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) {
+ ppc_md.get_boot_time = rtas_get_boot_time;
+ ppc_md.get_rtc_time = rtas_get_rtc_time;
+ ppc_md.set_rtc_time = rtas_set_rtc_time;
+ }
+
#ifdef CONFIG_BOOTX_TEXT
if (ppc_md.progress == NULL && boot_text_mapped)
ppc_md.progress = btext_progress;
@@ -505,9 +512,11 @@ void __init chrp_init(void)
ppc_md.halt = rtas_halt;
ppc_md.time_init = chrp_time_init;
+ ppc_md.calibrate_decr = chrp_calibrate_decr;
+
+ /* this may get overridden with rtas routines later... */
ppc_md.set_rtc_time = chrp_set_rtc_time;
ppc_md.get_rtc_time = chrp_get_rtc_time;
- ppc_md.calibrate_decr = chrp_calibrate_decr;
#ifdef CONFIG_SMP
smp_ops = &chrp_smp_ops;
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index bb2315997d4..b616053bc33 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -34,6 +34,7 @@
#include <asm/machdep.h>
#include <asm/smp.h>
#include <asm/mpic.h>
+#include <asm/rtas.h>
static void __devinit smp_chrp_kick_cpu(int nr)
{
diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c
index 9e53535ddb8..737ee5d9f0a 100644
--- a/arch/powerpc/platforms/chrp/time.c
+++ b/arch/powerpc/platforms/chrp/time.c
@@ -87,7 +87,6 @@ int chrp_set_rtc_time(struct rtc_time *tmarg)
chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
- tm.tm_year -= 1900;
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
BIN_TO_BCD(tm.tm_sec);
BIN_TO_BCD(tm.tm_min);
@@ -156,7 +155,7 @@ void chrp_get_rtc_time(struct rtc_time *tm)
BCD_TO_BIN(mon);
BCD_TO_BIN(year);
}
- if ((year += 1900) < 1970)
+ if (year < 70)
year += 100;
tm->tm_sec = sec;
tm->tm_min = min;
diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c
index 40fc07a8e60..15846cc938a 100644
--- a/arch/powerpc/platforms/maple/time.c
+++ b/arch/powerpc/platforms/maple/time.c
@@ -158,6 +158,11 @@ int maple_set_rtc_time(struct rtc_time *tm)
return 0;
}
+static struct resource rtc_iores = {
+ .name = "rtc",
+ .flags = IORESOURCE_BUSY,
+};
+
unsigned long __init maple_get_boot_time(void)
{
struct rtc_time tm;
@@ -172,7 +177,11 @@ unsigned long __init maple_get_boot_time(void)
printk(KERN_INFO "Maple: No device node for RTC, assuming "
"legacy address (0x%x)\n", maple_rtc_addr);
}
-
+
+ rtc_iores.start = maple_rtc_addr;
+ rtc_iores.end = maple_rtc_addr + 7;
+ request_resource(&ioport_resource, &rtc_iores);
+
maple_get_rtc_time(&tm);
return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec);
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 79de2310e70..c8d2a40dc5b 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -86,7 +86,8 @@ static int ibm_read_slot_reset_state;
static int ibm_read_slot_reset_state2;
static int ibm_slot_error_detail;
-static int eeh_subsystem_enabled;
+int eeh_subsystem_enabled;
+EXPORT_SYMBOL(eeh_subsystem_enabled);
/* Lock to avoid races due to multiple reports of an error */
static DEFINE_SPINLOCK(confirm_error_lock);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index b9d9732b2e0..4a465f067ed 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -504,7 +504,7 @@ static void pseries_dedicated_idle(void)
lpaca->lppaca.idle = 1;
if (!need_resched()) {
- start_snooze = __get_tb() +
+ start_snooze = get_tb() +
*smt_snooze_delay * tb_ticks_per_usec;
while (!need_resched() && !cpu_is_offline(cpu)) {
@@ -518,7 +518,7 @@ static void pseries_dedicated_idle(void)
HMT_very_low();
if (*smt_snooze_delay != 0 &&
- __get_tb() > start_snooze) {
+ get_tb() > start_snooze) {
HMT_medium();
dedicated_idle_sleep(cpu);
}
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index 17a4da65e27..0bb23fce429 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -13,7 +13,7 @@ extra-$(CONFIG_POWER4) += idle_power4.o
extra-y += vmlinux.lds
obj-y := entry.o traps.o idle.o time.o misc.o \
- process.o align.o \
+ process.o \
setup.o \
ppc_htab.o
obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
@@ -38,7 +38,7 @@ endif
# These are here while we do the architecture merge
else
-obj-y := idle.o align.o
+obj-y := idle.o
obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
obj-$(CONFIG_MODULES) += module.o
diff --git a/arch/ppc/kernel/align.c b/arch/ppc/kernel/align.c
deleted file mode 100644
index ab398c4b70b..00000000000
--- a/arch/ppc/kernel/align.c
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * align.c - handle alignment exceptions for the Power PC.
- *
- * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- * Copyright (c) 1998-1999 TiVo, Inc.
- * PowerPC 403GCX modifications.
- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- * PowerPC 403GCX/405GP modifications.
- */
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/cache.h>
-
-struct aligninfo {
- unsigned char len;
- unsigned char flags;
-};
-
-#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
-#define OPCD(inst) (((inst) & 0xFC000000) >> 26)
-#define RS(inst) (((inst) & 0x03E00000) >> 21)
-#define RA(inst) (((inst) & 0x001F0000) >> 16)
-#define IS_XFORM(code) ((code) == 31)
-#endif
-
-#define INVALID { 0, 0 }
-
-#define LD 1 /* load */
-#define ST 2 /* store */
-#define SE 4 /* sign-extend value */
-#define F 8 /* to/from fp regs */
-#define U 0x10 /* update index register */
-#define M 0x20 /* multiple load/store */
-#define S 0x40 /* single-precision fp, or byte-swap value */
-#define SX 0x40 /* byte count in XER */
-#define HARD 0x80 /* string, stwcx. */
-
-#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */
-
-/*
- * The PowerPC stores certain bits of the instruction that caused the
- * alignment exception in the DSISR register. This array maps those
- * bits to information about the operand length and what the
- * instruction would do.
- */
-static struct aligninfo aligninfo[128] = {
- { 4, LD }, /* 00 0 0000: lwz / lwarx */
- INVALID, /* 00 0 0001 */
- { 4, ST }, /* 00 0 0010: stw */
- INVALID, /* 00 0 0011 */
- { 2, LD }, /* 00 0 0100: lhz */
- { 2, LD+SE }, /* 00 0 0101: lha */
- { 2, ST }, /* 00 0 0110: sth */
- { 4, LD+M }, /* 00 0 0111: lmw */
- { 4, LD+F+S }, /* 00 0 1000: lfs */
- { 8, LD+F }, /* 00 0 1001: lfd */
- { 4, ST+F+S }, /* 00 0 1010: stfs */
- { 8, ST+F }, /* 00 0 1011: stfd */
- INVALID, /* 00 0 1100 */
- INVALID, /* 00 0 1101: ld/ldu/lwa */
- INVALID, /* 00 0 1110 */
- INVALID, /* 00 0 1111: std/stdu */
- { 4, LD+U }, /* 00 1 0000: lwzu */
- INVALID, /* 00 1 0001 */
- { 4, ST+U }, /* 00 1 0010: stwu */
- INVALID, /* 00 1 0011 */
- { 2, LD+U }, /* 00 1 0100: lhzu */
- { 2, LD+SE+U }, /* 00 1 0101: lhau */
- { 2, ST+U }, /* 00 1 0110: sthu */
- { 4, ST+M }, /* 00 1 0111: stmw */
- { 4, LD+F+S+U }, /* 00 1 1000: lfsu */
- { 8, LD+F+U }, /* 00 1 1001: lfdu */
- { 4, ST+F+S+U }, /* 00 1 1010: stfsu */
- { 8, ST+F+U }, /* 00 1 1011: stfdu */
- INVALID, /* 00 1 1100 */
- INVALID, /* 00 1 1101 */
- INVALID, /* 00 1 1110 */
- INVALID, /* 00 1 1111 */
- INVALID, /* 01 0 0000: ldx */
- INVALID, /* 01 0 0001 */
- INVALID, /* 01 0 0010: stdx */
- INVALID, /* 01 0 0011 */
- INVALID, /* 01 0 0100 */
- INVALID, /* 01 0 0101: lwax */
- INVALID, /* 01 0 0110 */
- INVALID, /* 01 0 0111 */
- { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */
- { 4, LD+M+HARD }, /* 01 0 1001: lswi */
- { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */
- { 4, ST+M+HARD }, /* 01 0 1011: stswi */
- INVALID, /* 01 0 1100 */
- INVALID, /* 01 0 1101 */
- INVALID, /* 01 0 1110 */
- INVALID, /* 01 0 1111 */
- INVALID, /* 01 1 0000: ldux */
- INVALID, /* 01 1 0001 */
- INVALID, /* 01 1 0010: stdux */
- INVALID, /* 01 1 0011 */
- INVALID, /* 01 1 0100 */
- INVALID, /* 01 1 0101: lwaux */
- INVALID, /* 01 1 0110 */
- INVALID, /* 01 1 0111 */
- INVALID, /* 01 1 1000 */
- INVALID, /* 01 1 1001 */
- INVALID, /* 01 1 1010 */
- INVALID, /* 01 1 1011 */
- INVALID, /* 01 1 1100 */
- INVALID, /* 01 1 1101 */
- INVALID, /* 01 1 1110 */
- INVALID, /* 01 1 1111 */
- INVALID, /* 10 0 0000 */
- INVALID, /* 10 0 0001 */
- { 0, ST+HARD }, /* 10 0 0010: stwcx. */
- INVALID, /* 10 0 0011 */
- INVALID, /* 10 0 0100 */
- INVALID, /* 10 0 0101 */
- INVALID, /* 10 0 0110 */
- INVALID, /* 10 0 0111 */
- { 4, LD+S }, /* 10 0 1000: lwbrx */
- INVALID, /* 10 0 1001 */
- { 4, ST+S }, /* 10 0 1010: stwbrx */
- INVALID, /* 10 0 1011 */
- { 2, LD+S }, /* 10 0 1100: lhbrx */
- INVALID, /* 10 0 1101 */
- { 2, ST+S }, /* 10 0 1110: sthbrx */
- INVALID, /* 10 0 1111 */
- INVALID, /* 10 1 0000 */
- INVALID, /* 10 1 0001 */
- INVALID, /* 10 1 0010 */
- INVALID, /* 10 1 0011 */
- INVALID, /* 10 1 0100 */
- INVALID, /* 10 1 0101 */
- INVALID, /* 10 1 0110 */
- INVALID, /* 10 1 0111 */
- INVALID, /* 10 1 1000 */
- INVALID, /* 10 1 1001 */
- INVALID, /* 10 1 1010 */
- INVALID, /* 10 1 1011 */
- INVALID, /* 10 1 1100 */
- INVALID, /* 10 1 1101 */
- INVALID, /* 10 1 1110 */
- { 0, ST+HARD }, /* 10 1 1111: dcbz */
- { 4, LD }, /* 11 0 0000: lwzx */
- INVALID, /* 11 0 0001 */
- { 4, ST }, /* 11 0 0010: stwx */
- INVALID, /* 11 0 0011 */
- { 2, LD }, /* 11 0 0100: lhzx */
- { 2, LD+SE }, /* 11 0 0101: lhax */
- { 2, ST }, /* 11 0 0110: sthx */
- INVALID, /* 11 0 0111 */
- { 4, LD+F+S }, /* 11 0 1000: lfsx */
- { 8, LD+F }, /* 11 0 1001: lfdx */
- { 4, ST+F+S }, /* 11 0 1010: stfsx */
- { 8, ST+F }, /* 11 0 1011: stfdx */
- INVALID, /* 11 0 1100 */
- INVALID, /* 11 0 1101: lmd */
- INVALID, /* 11 0 1110 */
- INVALID, /* 11 0 1111: stmd */
- { 4, LD+U }, /* 11 1 0000: lwzux */
- INVALID, /* 11 1 0001 */
- { 4, ST+U }, /* 11 1 0010: stwux */
- INVALID, /* 11 1 0011 */
- { 2, LD+U }, /* 11 1 0100: lhzux */
- { 2, LD+SE+U }, /* 11 1 0101: lhaux */
- { 2, ST+U }, /* 11 1 0110: sthux */
- INVALID, /* 11 1 0111 */
- { 4, LD+F+S+U }, /* 11 1 1000: lfsux */
- { 8, LD+F+U }, /* 11 1 1001: lfdux */
- { 4, ST+F+S+U }, /* 11 1 1010: stfsux */
- { 8, ST+F+U }, /* 11 1 1011: stfdux */
- INVALID, /* 11 1 1100 */
- INVALID, /* 11 1 1101 */
- INVALID, /* 11 1 1110 */
- INVALID, /* 11 1 1111 */
-};
-
-#define SWAP(a, b) (t = (a), (a) = (b), (b) = t)
-
-int
-fix_alignment(struct pt_regs *regs)
-{
- int instr, nb, flags;
-#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
- int opcode, f1, f2, f3;
-#endif
- int i, t;
- int reg, areg;
- int offset, nb0;
- unsigned char __user *addr;
- unsigned char *rptr;
- union {
- long l;
- float f;
- double d;
- unsigned char v[8];
- } data;
-
- CHECK_FULL_REGS(regs);
-
-#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
- /* The 4xx-family & Book-E processors have no DSISR register,
- * so we emulate it.
- * The POWER4 has a DSISR register but doesn't set it on
- * an alignment fault. -- paulus
- */
-
- if (__get_user(instr, (unsigned int __user *) regs->nip))
- return 0;
- opcode = OPCD(instr);
- reg = RS(instr);
- areg = RA(instr);
-
- if (!IS_XFORM(opcode)) {
- f1 = 0;
- f2 = (instr & 0x04000000) >> 26;
- f3 = (instr & 0x78000000) >> 27;
- } else {
- f1 = (instr & 0x00000006) >> 1;
- f2 = (instr & 0x00000040) >> 6;
- f3 = (instr & 0x00000780) >> 7;
- }
-
- instr = ((f1 << 5) | (f2 << 4) | f3);
-#else
- reg = (regs->dsisr >> 5) & 0x1f; /* source/dest register */
- areg = regs->dsisr & 0x1f; /* register to update */
- instr = (regs->dsisr >> 10) & 0x7f;
-#endif
-
- nb = aligninfo[instr].len;
- if (nb == 0) {
- long __user *p;
- int i;
-
- if (instr != DCBZ)
- return 0; /* too hard or invalid instruction */
- /*
- * The dcbz (data cache block zero) instruction
- * gives an alignment fault if used on non-cacheable
- * memory. We handle the fault mainly for the
- * case when we are running with the cache disabled
- * for debugging.
- */
- p = (long __user *) (regs->dar & -L1_CACHE_BYTES);
- if (user_mode(regs)
- && !access_ok(VERIFY_WRITE, p, L1_CACHE_BYTES))
- return -EFAULT;
- for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i)
- if (__put_user(0, p+i))
- return -EFAULT;
- return 1;
- }
-
- flags = aligninfo[instr].flags;
- if ((flags & (LD|ST)) == 0)
- return 0;
-
- /* For the 4xx-family & Book-E processors, the 'dar' field of the
- * pt_regs structure is overloaded and is really from the DEAR.
- */
-
- addr = (unsigned char __user *)regs->dar;
-
- if (flags & M) {
- /* lmw, stmw, lswi/x, stswi/x */
- nb0 = 0;
- if (flags & HARD) {
- if (flags & SX) {
- nb = regs->xer & 127;
- if (nb == 0)
- return 1;
- } else {
- if (__get_user(instr,
- (unsigned int __user *)regs->nip))
- return 0;
- nb = (instr >> 11) & 0x1f;
- if (nb == 0)
- nb = 32;
- }
- if (nb + reg * 4 > 128) {
- nb0 = nb + reg * 4 - 128;
- nb = 128 - reg * 4;
- }
- } else {
- /* lwm, stmw */
- nb = (32 - reg) * 4;
- }
-
- if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0))
- return -EFAULT; /* bad address */
-
- rptr = (unsigned char *) &regs->gpr[reg];
- if (flags & LD) {
- for (i = 0; i < nb; ++i)
- if (__get_user(rptr[i], addr+i))
- return -EFAULT;
- if (nb0 > 0) {
- rptr = (unsigned char *) &regs->gpr[0];
- addr += nb;
- for (i = 0; i < nb0; ++i)
- if (__get_user(rptr[i], addr+i))
- return -EFAULT;
- }
- for (; (i & 3) != 0; ++i)
- rptr[i] = 0;
- } else {
- for (i = 0; i < nb; ++i)
- if (__put_user(rptr[i], addr+i))
- return -EFAULT;
- if (nb0 > 0) {
- rptr = (unsigned char *) &regs->gpr[0];
- addr += nb;
- for (i = 0; i < nb0; ++i)
- if (__put_user(rptr[i], addr+i))
- return -EFAULT;
- }
- }
- return 1;
- }
-
- offset = 0;
- if (nb < 4) {
- /* read/write the least significant bits */
- data.l = 0;
- offset = 4 - nb;
- }
-
- /* Verify the address of the operand */
- if (user_mode(regs)) {
- if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb))
- return -EFAULT; /* bad address */
- }
-
- if (flags & F) {
- preempt_disable();
- if (regs->msr & MSR_FP)
- giveup_fpu(current);
- preempt_enable();
- }
-
- /* If we read the operand, copy it in, else get register values */
- if (flags & LD) {
- for (i = 0; i < nb; ++i)
- if (__get_user(data.v[offset+i], addr+i))
- return -EFAULT;
- } else if (flags & F) {
- data.d = current->thread.fpr[reg];
- } else {
- data.l = regs->gpr[reg];
- }
-
- switch (flags & ~U) {
- case LD+SE: /* sign extend */
- if (data.v[2] >= 0x80)
- data.v[0] = data.v[1] = -1;
- break;
-
- case LD+S: /* byte-swap */
- case ST+S:
- if (nb == 2) {
- SWAP(data.v[2], data.v[3]);
- } else {
- SWAP(data.v[0], data.v[3]);
- SWAP(data.v[1], data.v[2]);
- }
- break;
-
- /* Single-precision FP load and store require conversions... */
- case LD+F+S:
-#ifdef CONFIG_PPC_FPU
- preempt_disable();
- enable_kernel_fp();
- cvt_fd(&data.f, &data.d, &current->thread);
- preempt_enable();
-#else
- return 0;
-#endif
- break;
- case ST+F+S:
-#ifdef CONFIG_PPC_FPU
- preempt_disable();
- enable_kernel_fp();
- cvt_df(&data.d, &data.f, &current->thread);
- preempt_enable();
-#else
- return 0;
-#endif
- break;
- }
-
- if (flags & ST) {
- for (i = 0; i < nb; ++i)
- if (__put_user(data.v[offset+i], addr+i))
- return -EFAULT;
- } else if (flags & F) {
- current->thread.fpr[reg] = data.d;
- } else {
- regs->gpr[reg] = data.l;
- }
-
- if (flags & U)
- regs->gpr[areg] = regs->dar;
-
- return 1;
-}
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
index 48ed58f995c..f7fae5f153b 100644
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -45,7 +45,6 @@ static void update_bridge_base(struct pci_bus *bus, int i);
static void pcibios_fixup_resources(struct pci_dev* dev);
static void fixup_broken_pcnet32(struct pci_dev* dev);
static int reparent_resources(struct resource *parent, struct resource *res);
-static void fixup_rev1_53c810(struct pci_dev* dev);
static void fixup_cpc710_pci64(struct pci_dev* dev);
#ifdef CONFIG_PPC_OF
static u8* pci_to_OF_bus_map;
diff --git a/arch/ppc/syslib/mpc83xx_sys.c b/arch/ppc/syslib/mpc83xx_sys.c
index a1523989aff..82cf3ab77f4 100644
--- a/arch/ppc/syslib/mpc83xx_sys.c
+++ b/arch/ppc/syslib/mpc83xx_sys.c
@@ -69,9 +69,33 @@ struct ppc_sys_spec ppc_sys_specs[] = {
},
},
{
- .ppc_sys_name = "8343E",
+ .ppc_sys_name = "8347E",
.mask = 0xFFFF0000,
.value = 0x80540000,
+ .num_devices = 9,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
+ MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2,
+ MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
+ },
+ },
+ {
+ .ppc_sys_name = "8347",
+ .mask = 0xFFFF0000,
+ .value = 0x80550000,
+ .num_devices = 8,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
+ MPC83xx_IIC2, MPC83xx_DUART,
+ MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
+ },
+ },
+ {
+ .ppc_sys_name = "8343E",
+ .mask = 0xFFFF0000,
+ .value = 0x80560000,
.num_devices = 8,
.device_list = (enum ppc_sys_devices[])
{
@@ -83,7 +107,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
{
.ppc_sys_name = "8343",
.mask = 0xFFFF0000,
- .value = 0x80550000,
+ .value = 0x80570000,
.num_devices = 7,
.device_list = (enum ppc_sys_devices[])
{
diff --git a/arch/ppc64/Kconfig.debug b/arch/ppc64/Kconfig.debug
deleted file mode 100644
index b258c9314a1..00000000000
--- a/arch/ppc64/Kconfig.debug
+++ /dev/null
@@ -1,65 +0,0 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config DEBUG_STACKOVERFLOW
- bool "Check for stack overflows"
- depends on DEBUG_KERNEL
- help
- This option will cause messages to be printed if free stack space
- drops below a certain limit.
-
-config KPROBES
- bool "Kprobes"
- depends on DEBUG_KERNEL
- help
- Kprobes allows you to trap at almost any kernel address and
- execute a callback function. register_kprobe() establishes
- a probepoint and specifies the callback. Kprobes is useful
- for kernel debugging, non-intrusive instrumentation and testing.
- If in doubt, say "N".
-
-config DEBUG_STACK_USAGE
- bool "Stack utilization instrumentation"
- depends on DEBUG_KERNEL
- help
- Enables the display of the minimum amount of free stack which each
- task has ever had available in the sysrq-T and sysrq-P debug output.
-
- This option will slow down process creation somewhat.
-
-config DEBUGGER
- bool "Enable debugger hooks"
- depends on DEBUG_KERNEL
- help
- Include in-kernel hooks for kernel debuggers. Unless you are
- intending to debug the kernel, say N here.
-
-config XMON
- bool "Include xmon kernel debugger"
- depends on DEBUGGER && !PPC_ISERIES
- help
- Include in-kernel hooks for the xmon kernel monitor/debugger.
- Unless you are intending to debug the kernel, say N here.
- Make sure to enable also CONFIG_BOOTX_TEXT on Macs. Otherwise
- nothing will appear on the screen (xmon writes directly to the
- framebuffer memory).
- The cmdline option 'xmon' or 'xmon=early' will drop into xmon very
- early during boot. 'xmon=on' will just enable the xmon debugger hooks.
- 'xmon=off' will disable the debugger hooks if CONFIG_XMON_DEFAULT is set.
-
-config XMON_DEFAULT
- bool "Enable xmon by default"
- depends on XMON
- help
- xmon is normally disabled unless booted with 'xmon=on'.
- Use 'xmon=off' to disable xmon init during runtime.
-
-config IRQSTACKS
- bool "Use separate kernel stacks when processing interrupts"
- help
- If you say Y here the kernel will use separate kernel stacks
- for handling hard and soft interrupts. This can help avoid
- overflowing the process kernel stacks.
-
-endmenu
diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile
deleted file mode 100644
index a55a82d145d..00000000000
--- a/arch/ppc64/Makefile
+++ /dev/null
@@ -1,142 +0,0 @@
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" and "archdep" for cleaning up and making dependencies for
-# this architecture
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-# Changes for PPC by Gary Thomas
-# Rewritten by Cort Dougan and Paul Mackerras
-# Adjusted for PPC64 by Tom Gall
-#
-
-KERNELLOAD := 0xc000000000000000
-
-# Set default 32 bits cross compilers for vdso and boot wrapper
-CROSS32_COMPILE ?=
-
-CROSS32CC := $(CROSS32_COMPILE)gcc
-CROSS32AS := $(CROSS32_COMPILE)as
-CROSS32LD := $(CROSS32_COMPILE)ld
-CROSS32OBJCOPY := $(CROSS32_COMPILE)objcopy
-
-# If we have a biarch compiler, use it for 32 bits cross compile if
-# CROSS32_COMPILE wasn't explicitely defined, and add proper explicit
-# target type to target compilers
-
-HAS_BIARCH := $(call cc-option-yn, -m64)
-ifeq ($(HAS_BIARCH),y)
-ifeq ($(CROSS32_COMPILE),)
-CROSS32CC := $(CC) -m32
-CROSS32AS := $(AS) -a32
-CROSS32LD := $(LD) -m elf32ppc
-CROSS32OBJCOPY := $(OBJCOPY)
-endif
-override AS += -a64
-override LD += -m elf64ppc
-override CC += -m64
-endif
-
-export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY
-
-new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
-
-ifeq ($(new_nm),y)
-NM := $(NM) --synthetic
-
-endif
-
-CHECKFLAGS += -m64 -D__powerpc__ -D__powerpc64__
-
-LDFLAGS := -m elf64ppc
-LDFLAGS_vmlinux := -Bstatic -e $(KERNELLOAD) -Ttext $(KERNELLOAD)
-CFLAGS += -msoft-float -pipe -mminimal-toc -mtraceback=none \
- -mcall-aixdesc
-# Temporary hack until we have migrated to asm-powerpc
-CPPFLAGS += -Iarch/$(ARCH)/include
-
-GCC_VERSION := $(call cc-version)
-GCC_BROKEN_VEC := $(shell if [ $(GCC_VERSION) -lt 0400 ] ; then echo "y"; fi ;)
-
-ifeq ($(CONFIG_POWER4_ONLY),y)
-ifeq ($(CONFIG_ALTIVEC),y)
-ifeq ($(GCC_BROKEN_VEC),y)
- CFLAGS += $(call cc-option,-mcpu=970)
-else
- CFLAGS += $(call cc-option,-mcpu=power4)
-endif
-else
- CFLAGS += $(call cc-option,-mcpu=power4)
-endif
-else
- CFLAGS += $(call cc-option,-mtune=power4)
-endif
-
-# No AltiVec instruction when building kernel
-CFLAGS += $(call cc-option, -mno-altivec)
-
-# Enable unit-at-a-time mode when possible. It shrinks the
-# kernel considerably.
-CFLAGS += $(call cc-option,-funit-at-a-time)
-
-head-y := arch/ppc64/kernel/head.o
-head-y += arch/powerpc/kernel/fpu.o
-head-y += arch/powerpc/kernel/entry_64.o
-
-core-y += arch/ppc64/kernel/ arch/powerpc/kernel/
-core-y += arch/powerpc/mm/
-core-y += arch/powerpc/sysdev/
-core-y += arch/powerpc/platforms/
-core-y += arch/powerpc/lib/
-core-$(CONFIG_XMON) += arch/powerpc/xmon/
-drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
-
-boot := arch/ppc64/boot
-
-boottargets-$(CONFIG_PPC_PSERIES) += zImage zImage.initrd
-boottargets-$(CONFIG_PPC_PMAC) += zImage.vmode zImage.initrd.vmode
-boottargets-$(CONFIG_PPC_MAPLE) += zImage zImage.initrd
-boottargets-$(CONFIG_PPC_ISERIES) += vmlinux.sminitrd vmlinux.initrd vmlinux.sm
-boottargets-$(CONFIG_PPC_BPA) += zImage zImage.initrd
-$(boottargets-y): vmlinux
- $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage
-bootimage-$(CONFIG_PPC_PMAC) := vmlinux
-bootimage-$(CONFIG_PPC_MAPLE) := $(boot)/zImage
-bootimage-$(CONFIG_PPC_BPA) := $(boot)/zImage
-bootimage-$(CONFIG_PPC_ISERIES) := vmlinux
-BOOTIMAGE := $(bootimage-y)
-install: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
-
-defaultimage-$(CONFIG_PPC_PSERIES) := zImage
-defaultimage-$(CONFIG_PPC_PMAC) := zImage.vmode
-defaultimage-$(CONFIG_PPC_MAPLE) := zImage
-defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux
-KBUILD_IMAGE := $(defaultimage-y)
-all: $(KBUILD_IMAGE)
-
-archclean:
- $(Q)$(MAKE) $(clean)=$(boot)
- # Temporary hack until we have migrated to asm-powerpc
- $(Q)rm -rf arch/$(ARCH)/include
-
-
-# Temporary hack until we have migrated to asm-powerpc
-include/asm: arch/$(ARCH)/include/asm
-arch/$(ARCH)/include/asm:
- $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi
- $(Q)ln -fsn $(srctree)/include/asm-powerpc arch/$(ARCH)/include/asm
-
-define archhelp
- echo ' zImage.vmode - Compressed kernel image (arch/$(ARCH)/boot/zImage.vmode)'
- echo ' zImage.initrd.vmode - Compressed kernel image with initrd attached,'
- echo ' sourced from arch/$(ARCH)/boot/ramdisk.image.gz'
- echo ' (arch/$(ARCH)/boot/zImage.initrd.vmode)'
- echo ' zImage - zImage for pSeries machines'
- echo ' zImage.initrd - zImage with initrd for pSeries machines'
-endef
diff --git a/arch/ppc64/configs/bpa_defconfig b/arch/ppc64/configs/bpa_defconfig
deleted file mode 100644
index 67ffecbc05c..00000000000
--- a/arch/ppc64/configs/bpa_defconfig
+++ /dev/null
@@ -1,1024 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:29:10 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_PSERIES is not set
-CONFIG_PPC_BPA=y
-# CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_PPC_OF=y
-CONFIG_BPA_IIC=y
-CONFIG_ALTIVEC=y
-CONFIG_KEXEC=y
-# CONFIG_U3_DART is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_POWER4_ONLY is not set
-# CONFIG_IOMMU_VMERGE is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=y
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_AEC62XX=y
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-CONFIG_BLK_DEV_SIIMAGE=y
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-CONFIG_SKGE=m
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_SPIDER_NET is not set
-# CONFIG_MV643XX_ETH is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_WATCHDOG_RTAS=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_KPROBES is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUGGER=y
-# CONFIG_XMON is not set
-# CONFIG_PPCDBG is not set
-CONFIG_IRQSTACKS=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig
deleted file mode 100644
index 6323065fbf2..00000000000
--- a/arch/ppc64/configs/g5_defconfig
+++ /dev/null
@@ -1,1392 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:30:23 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_BPA is not set
-CONFIG_PPC_PMAC=y
-# CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_PPC_OF=y
-CONFIG_MPIC=y
-CONFIG_ALTIVEC=y
-CONFIG_KEXEC=y
-CONFIG_U3_DART=y
-CONFIG_PPC_PMAC64=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_POWER4_ONLY=y
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-CONFIG_SCSI_SATA_SVW=y
-# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_MV is not set
-# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-CONFIG_IEEE1394_OUI_DB=y
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-# CONFIG_IEEE1394_EXPORT_FULL_API is not set
-
-#
-# Device Drivers
-#
-# CONFIG_IEEE1394_PCILYNX is not set
-CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocol Drivers
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=y
-# CONFIG_IEEE1394_CMP is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-CONFIG_ADB_PMU=y
-CONFIG_PMAC_SMU=y
-CONFIG_THERM_PM72=y
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-CONFIG_SUNGEM=y
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_ACENIC=y
-CONFIG_ACENIC_OMIT_TIGON_I=y
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-CONFIG_TIGON3=m
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-CONFIG_TR=y
-CONFIG_IBMOL=y
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_PMACZILOG is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-CONFIG_AGP=m
-CONFIG_AGP_UNINORTH=m
-# CONFIG_DRM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_KEYWEST=y
-CONFIG_I2C_PMAC_SMU=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_NVIDIA is not set
-CONFIG_FB_RIVA=y
-# CONFIG_FB_RIVA_I2C is not set
-# CONFIG_FB_RIVA_DEBUG is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
-CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_DEVICE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-CONFIG_HID_FF=y
-CONFIG_HID_PID=y
-CONFIG_LOGITECH_FF=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_ZAURUS is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_KPROBES is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_PPCDBG is not set
-CONFIG_IRQSTACKS=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig
deleted file mode 100644
index 62e92c7e9e2..00000000000
--- a/arch/ppc64/configs/iSeries_defconfig
+++ /dev/null
@@ -1,998 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:30:56 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Platform support
-#
-CONFIG_PPC_ISERIES=y
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_IBMVIO=y
-# CONFIG_POWER4_ONLY is not set
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=32
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_LPARCFG=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_NETLINK is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-CONFIG_SCSI_IBMVSCSI=m
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-CONFIG_TR=y
-CONFIG_IBMOL=y
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_ISERIES_VETH=y
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=y
-CONFIG_NETPOLL=y
-CONFIG_NETPOLL_RX=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=m
-CONFIG_SERIAL_ICOM=m
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# iSeries device drivers
-#
-CONFIG_VIOCONS=y
-CONFIG_VIODASD=y
-CONFIG_VIOCD=m
-CONFIG_VIOTAPE=m
-CONFIG_VIOPATH=y
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
-CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUGGER is not set
-# CONFIG_PPCDBG is not set
-CONFIG_IRQSTACKS=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig
deleted file mode 100644
index 7b480f3d140..00000000000
--- a/arch/ppc64/configs/maple_defconfig
+++ /dev/null
@@ -1,1062 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:31:24 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_BPA is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_MAPLE=y
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_PPC_OF=y
-CONFIG_MPIC=y
-# CONFIG_ALTIVEC is not set
-CONFIG_KEXEC=y
-CONFIG_U3_DART=y
-CONFIG_MPIC_BROKEN_U3=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_POWER4_ONLY=y
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_IDE_TASK_IOCTL=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=y
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-CONFIG_AMD8111_ETH=y
-# CONFIG_AMD8111E_NAPI is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-CONFIG_I2C_AMD8111=y
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=y
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_TI=m
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf-8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DEBUGGER=y
-CONFIG_XMON=y
-CONFIG_XMON_DEFAULT=y
-# CONFIG_PPCDBG is not set
-# CONFIG_IRQSTACKS is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig
deleted file mode 100644
index 9f09dff9e11..00000000000
--- a/arch/ppc64/configs/pSeries_defconfig
+++ /dev/null
@@ -1,1371 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:32:17 2005
-#
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_CPUSETS=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_PPC_PSERIES=y
-# CONFIG_PPC_BPA is not set
-# CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
-CONFIG_PPC_OF=y
-CONFIG_XICS=y
-CONFIG_MPIC=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_SPLPAR=y
-CONFIG_KEXEC=y
-CONFIG_IBMVIO=y
-# CONFIG_U3_DART is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_POWER4_ONLY is not set
-CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=128
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
-CONFIG_NUMA=y
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_EEH=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=m
-CONFIG_SCANLOG=m
-CONFIG_LPARCFG=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus Options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-CONFIG_HOTPLUG_PCI=m
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HOTPLUG_PCI_RPA=m
-CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_NETLINK=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=m
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=y
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-CONFIG_SCSI_IBMVSCSI=y
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-CONFIG_SCSI_IPR=y
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_QLA24XX=m
-CONFIG_SCSI_LPFC=m
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_IBMVETH=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_ACENIC=y
-CONFIG_ACENIC_OMIT_TIGON_I=y
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_IXGB=m
-# CONFIG_IXGB_NAPI is not set
-CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
-# CONFIG_2BUFF_MODE is not set
-
-#
-# Token Ring devices
-#
-CONFIG_TR=y
-CONFIG_IBMOL=y
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=y
-CONFIG_NETPOLL=y
-CONFIG_NETPOLL_RX=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_PCSPKR=m
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_ICOM=m
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-CONFIG_HVC_CONSOLE=y
-CONFIG_HVCS=m
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=1024
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
-CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
-CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_DEVICE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-# CONFIG_INFINIBAND_USER_ACCESS is not set
-CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DEBUGGER=y
-CONFIG_XMON=y
-CONFIG_XMON_DEFAULT=y
-# CONFIG_PPCDBG is not set
-CONFIG_IRQSTACKS=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile
deleted file mode 100644
index e876c213f5c..00000000000
--- a/arch/ppc64/kernel/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the linux ppc64 kernel.
-#
-
-obj-y += idle.o align.o
-
-obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o