diff options
Diffstat (limited to 'arch')
174 files changed, 4013 insertions, 6752 deletions
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c index 8fc0edb5211..2feeef81d84 100644 --- a/arch/arm/mach-ks8695/board-micrel.c +++ b/arch/arm/mach-ks8695/board-micrel.c @@ -23,24 +23,24 @@ #include "generic.h" #ifdef CONFIG_PCI -static int __init micrel_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int micrel_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { return KS8695_IRQ_EXTERN0; } -static struct ks8695_pci_cfg micrel_pci = { +static struct ks8695_pci_cfg __initdata micrel_pci = { .mode = KS8695_MODE_MINIPCI, .map_irq = micrel_pci_map_irq, }; #endif -static void micrel_init(void) +static void __init micrel_init(void) { printk(KERN_INFO "Micrel KS8695 Development Board initializing\n"); #ifdef CONFIG_PCI - ks8695_init_pci(&micrel_pci); +// ks8695_init_pci(&micrel_pci); #endif /* Add devices */ diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig index 88d5fd34fe3..26d131a7707 100644 --- a/arch/arm/mach-s3c2442/Kconfig +++ b/arch/arm/mach-s3c2442/Kconfig @@ -6,7 +6,7 @@ config CPU_S3C2442 bool - depends on ARCH_S3C2420 + depends on ARCH_S3C2410 select S3C2410_CLOCK select S3C2410_GPIO select S3C2410_PM if PM diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index 2edcecdea8b..ef801563bbf 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -9,6 +9,7 @@ */ #include <linux/clk.h> #include <linux/etherdevice.h> +#include <linux/i2c-gpio.h> #include <linux/init.h> #include <linux/linkage.h> #include <linux/platform_device.h> @@ -123,6 +124,19 @@ static struct platform_device ngw_gpio_leds = { } }; +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = GPIO_PIN_PA(6), + .scl_pin = GPIO_PIN_PA(7), +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; + static int __init atngw100_init(void) { unsigned i; @@ -147,6 +161,10 @@ static int __init atngw100_init(void) } platform_device_register(&ngw_gpio_leds); + at32_select_gpio(i2c_gpio_data.sda_pin, 0); + at32_select_gpio(i2c_gpio_data.scl_pin, 0); + platform_device_register(&i2c_gpio_device); + return 0; } postcore_initcall(atngw100_init); diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig index 71bc7d364fb..718578f6406 100644 --- a/arch/avr32/boards/atstk1000/Kconfig +++ b/arch/avr32/boards/atstk1000/Kconfig @@ -50,4 +50,30 @@ config BOARD_ATSTK1002_SPI1 GPIO lines and accessed through the J1 jumper block. Say "y" here to configure that SPI controller. +config BOARD_ATSTK1002_J2_LED + bool + default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB + +choice + prompt "LEDs connected to J2:" + depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM + optional + help + Select this if you have jumpered the J2 jumper block to the + LED0..LED7 amber leds, or to the RGB leds, using a ten-pin + IDC cable. A default "heartbeat" trigger is provided, but + you can of course override this. + +config BOARD_ATSTK1002_J2_LED8 + bool "LED0..LED7" + help + Select this if J2 is jumpered to LED0..LED7 amber leds. + +config BOARD_ATSTK1002_J2_RGB + bool "RGB leds" + help + Select this if J2 is jumpered to the RGB leds. + +endchoice + endif # stk 1002 diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index cb93eabb9c6..c9981b731ef 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -11,6 +11,7 @@ #include <linux/etherdevice.h> #include <linux/init.h> #include <linux/kernel.h> +#include <linux/leds.h> #include <linux/platform_device.h> #include <linux/string.h> #include <linux/types.h> @@ -120,6 +121,65 @@ static void __init set_hw_addr(struct platform_device *pdev) clk_put(pclk); } +#ifdef CONFIG_BOARD_ATSTK1002_J2_LED + +static struct gpio_led stk_j2_led[] = { +#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8 +#define LEDSTRING "J2 jumpered to LED8" + { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), }, + { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), }, + { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), }, + { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), }, + { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), }, + { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), }, + { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), }, + { .name = "led7:amber", .gpio = GPIO_PIN_PB(30), + .default_trigger = "heartbeat", }, +#else /* RGB */ +#define LEDSTRING "J2 jumpered to RGB LEDs" + { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), }, + { .name = "g1:green", .gpio = GPIO_PIN_PB(10), }, + { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), }, + + { .name = "r2:red", .gpio = GPIO_PIN_PB( 9), + .default_trigger = "heartbeat", }, + { .name = "g2:green", .gpio = GPIO_PIN_PB(13), }, + { .name = "b2:blue", .gpio = GPIO_PIN_PB(15), + .default_trigger = "heartbeat", }, + /* PB16, PB30 unused */ +#endif +}; + +static struct gpio_led_platform_data stk_j2_led_data = { + .num_leds = ARRAY_SIZE(stk_j2_led), + .leds = stk_j2_led, +}; + +static struct platform_device stk_j2_led_dev = { + .name = "leds-gpio", + .id = 2, /* gpio block J2 */ + .dev = { + .platform_data = &stk_j2_led_data, + }, +}; + +static void setup_j2_leds(void) +{ + unsigned i; + + for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++) + at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT); + + printk("STK1002: " LEDSTRING "\n"); + platform_device_register(&stk_j2_led_dev); +} + +#else +static void setup_j2_leds(void) +{ +} +#endif + void __init setup_board(void) { #ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM @@ -185,6 +245,8 @@ static int __init atstk1002_init(void) at32_add_device_ssc(0, ATMEL_SSC_TX); #endif + setup_j2_leds(); + return 0; } postcore_initcall(atstk1002_init); diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index e7e724bc0ba..03e2e68f947 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -548,6 +548,7 @@ config ETRAX_IDE select BLK_DEV_IDEDISK select BLK_DEV_IDECD select BLK_DEV_IDEDMA + select IDE_GENERIC help Enable this to get support for ATA/IDE. You can't use parallel ports or SCSI ports diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index 1d859c16931..cc6ba542375 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -592,6 +592,7 @@ config ETRAX_IDE select BLK_DEV_IDEDISK select BLK_DEV_IDECD select BLK_DEV_IDEDMA + select IDE_GENERIC help Enables the ETRAX IDE driver. diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c index e061b63a003..dfbe7ab9ffe 100644 --- a/arch/h8300/kernel/process.c +++ b/arch/h8300/kernel/process.c @@ -37,6 +37,7 @@ #include <linux/a.out.h> #include <linux/interrupt.h> #include <linux/reboot.h> +#include <linux/fs.h> #include <asm/uaccess.h> #include <asm/system.h> diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c index de7688cfd57..ddc62727dc9 100644 --- a/arch/h8300/kernel/sys_h8300.c +++ b/arch/h8300/kernel/sys_h8300.c @@ -18,6 +18,7 @@ #include <linux/mman.h> #include <linux/file.h> #include <linux/utsname.h> +#include <linux/fs.h> #include <asm/setup.h> #include <asm/uaccess.h> diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index f9524933258..97b64d7d6bf 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -614,10 +614,14 @@ config X86_PAE # Common NUMA Features config NUMA - bool "Numa Memory Allocation and Scheduler Support" - depends on SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) + bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)" + depends on SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL default n if X86_PC default y if (X86_NUMAQ || X86_SUMMIT) + help + NUMA support for i386. This is currently high experimental + and should be only used for kernel development. It might also + cause boot failures. comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI) @@ -1228,6 +1232,11 @@ menuconfig INSTRUMENTATION bool "Instrumentation Support" depends on EXPERIMENTAL default y + ---help--- + Say Y here to get to see options related to performance measurement, + debugging, and testing. This option alone does not add any kernel code. + + If you say N, all options in this submenu will be skipped and disabled. if INSTRUMENTATION diff --git a/arch/i386/Makefile b/arch/i386/Makefile index 01f0ff0daaf..52b932478c6 100644 --- a/arch/i386/Makefile +++ b/arch/i386/Makefile @@ -51,8 +51,8 @@ cflags-y += -maccumulate-outgoing-args CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then echo $(call cc-option,-fno-unit-at-a-time); fi ;) # do binutils support CFI? -cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) -AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) # is .cfi_signal_frame supported too? cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) diff --git a/arch/i386/boot/boot.h b/arch/i386/boot/boot.h index dec70c9b605..20bab9431ac 100644 --- a/arch/i386/boot/boot.h +++ b/arch/i386/boot/boot.h @@ -87,7 +87,7 @@ static inline void set_fs(u16 seg) static inline u16 fs(void) { u16 seg; - asm("movw %%fs,%0" : "=rm" (seg)); + asm volatile("movw %%fs,%0" : "=rm" (seg)); return seg; } @@ -98,7 +98,7 @@ static inline void set_gs(u16 seg) static inline u16 gs(void) { u16 seg; - asm("movw %%gs,%0" : "=rm" (seg)); + asm volatile("movw %%gs,%0" : "=rm" (seg)); return seg; } @@ -107,19 +107,19 @@ typedef unsigned int addr_t; static inline u8 rdfs8(addr_t addr) { u8 v; - asm("movb %%fs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr)); + asm volatile("movb %%fs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr)); return v; } static inline u16 rdfs16(addr_t addr) { u16 v; - asm("movw %%fs:%1,%0" : "=r" (v) : "m" (*(u16 *)addr)); + asm volatile("movw %%fs:%1,%0" : "=r" (v) : "m" (*(u16 *)addr)); return v; } static inline u32 rdfs32(addr_t addr) { u32 v; - asm("movl %%fs:%1,%0" : "=r" (v) : "m" (*(u32 *)addr)); + asm volatile("movl %%fs:%1,%0" : "=r" (v) : "m" (*(u32 *)addr)); return v; } @@ -139,19 +139,19 @@ static inline void wrfs32(u32 v, addr_t addr) static inline u8 rdgs8(addr_t addr) { u8 v; - asm("movb %%gs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr)); + asm volatile("movb %%gs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr)); return v; } static inline u16 rdgs16(addr_t addr) { u16 v; - asm("movw %%gs:%1,%0" : "=r" (v) : "m" (*(u16 *)addr)); + asm volatile("movw %%gs:%1,%0" : "=r" (v) : "m" (*(u16 *)addr)); return v; } static inline u32 rdgs32(addr_t addr) { u32 v; - asm("movl %%gs:%1,%0" : "=r" (v) : "m" (*(u32 *)addr)); + asm volatile("movl %%gs:%1,%0" : "=r" (v) : "m" (*(u32 *)addr)); return v; } @@ -180,15 +180,15 @@ static inline int memcmp(const void *s1, const void *s2, size_t len) static inline int memcmp_fs(const void *s1, addr_t s2, size_t len) { u8 diff; - asm("fs; repe; cmpsb; setnz %0" - : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len)); + asm volatile("fs; repe; cmpsb; setnz %0" + : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len)); return diff; } static inline int memcmp_gs(const void *s1, addr_t s2, size_t len) { u8 diff; - asm("gs; repe; cmpsb; setnz %0" - : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len)); + asm volatile("gs; repe; cmpsb; setnz %0" + : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len)); return diff; } diff --git a/arch/i386/boot/cpucheck.c b/arch/i386/boot/cpucheck.c index 991e8ceae1d..e655a89c551 100644 --- a/arch/i386/boot/cpucheck.c +++ b/arch/i386/boot/cpucheck.c @@ -96,7 +96,8 @@ static int has_fpu(void) asm volatile("movl %0,%%cr0" : : "r" (cr0)); } - asm("fninit ; fnstsw %0 ; fnstcw %1" : "+m" (fsw), "+m" (fcw)); + asm volatile("fninit ; fnstsw %0 ; fnstcw %1" + : "+m" (fsw), "+m" (fcw)); return fsw == 0 && (fcw & 0x103f) == 0x003f; } diff --git a/arch/i386/boot/edd.c b/arch/i386/boot/edd.c index 658834d9f92..bd138e442ec 100644 --- a/arch/i386/boot/edd.c +++ b/arch/i386/boot/edd.c @@ -19,57 +19,28 @@ #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) -struct edd_dapa { - u8 pkt_size; - u8 rsvd; - u16 sector_cnt; - u16 buf_off, buf_seg; - u64 lba; - u64 buf_lin_addr; -}; - /* * Read the MBR (first sector) from a specific device. */ static int read_mbr(u8 devno, void *buf) { - struct edd_dapa dapa; - u16 ax, bx, cx, dx, si; - - memset(&dapa, 0, sizeof dapa); - dapa.pkt_size = sizeof(dapa); - dapa.sector_cnt = 1; - dapa.buf_off = (size_t)buf; - dapa.buf_seg = ds(); - /* dapa.lba = 0; */ - - ax = 0x4200; /* Extended Read */ - si = (size_t)&dapa; - dx = devno; - asm("pushfl; stc; int $0x13; setc %%al; popfl" - : "+a" (ax), "+S" (si), "+d" (dx) - : "m" (dapa) - : "ebx", "ecx", "edi", "memory"); - - if (!(u8)ax) - return 0; /* OK */ + u16 ax, bx, cx, dx; ax = 0x0201; /* Legacy Read, one sector */ cx = 0x0001; /* Sector 0-0-1 */ dx = devno; bx = (size_t)buf; - asm("pushfl; stc; int $0x13; setc %%al; popfl" - : "+a" (ax), "+c" (cx), "+d" (dx), "+b" (bx) - : : "esi", "edi", "memory"); + asm volatile("pushfl; stc; int $0x13; setc %%al; popfl" + : "+a" (ax), "+c" (cx), "+d" (dx), "+b" (bx) + : : "esi", "edi", "memory"); return -(u8)ax; /* 0 or -1 */ } -static u32 read_mbr_sig(u8 devno, struct edd_info *ei) +static u32 read_mbr_sig(u8 devno, struct edd_info *ei, u32 *mbrsig) { int sector_size; char *mbrbuf_ptr, *mbrbuf_end; - u32 mbrsig; u32 buf_base, mbr_base; extern char _end[]; @@ -85,15 +56,15 @@ static u32 read_mbr_sig(u8 devno, struct edd_info *ei) /* Make sure we actually have space on the heap... */ if (!(boot_params.hdr.loadflags & CAN_USE_HEAP)) - return 0; + return -1; if (mbrbuf_end > (char *)(size_t)boot_params.hdr.heap_end_ptr) - return 0; + return -1; if (read_mbr(devno, mbrbuf_ptr)) - return 0; + return -1; - mbrsig = *(u32 *)&mbrbuf_ptr[EDD_MBR_SIG_OFFSET]; - return mbrsig; + *mbrsig = *(u32 *)&mbrbuf_ptr[EDD_MBR_SIG_OFFSET]; + return 0; } static int get_edd_info(u8 devno, struct edd_info *ei) @@ -160,6 +131,7 @@ void query_edd(void) int do_edd = 1; int devno; struct edd_info ei, *edp; + u32 *mbrptr; if (cmdline_find_option("edd", eddarg, sizeof eddarg) > 0) { if (!strcmp(eddarg, "skipmbr") || !strcmp(eddarg, "skip")) @@ -168,7 +140,8 @@ void query_edd(void) do_edd = 0; } - edp = (struct edd_info *)boot_params.eddbuf; + edp = boot_params.eddbuf; + mbrptr = boot_params.edd_mbr_sig_buffer; if (!do_edd) return; @@ -186,11 +159,8 @@ void query_edd(void) boot_params.eddbuf_entries++; } - if (do_mbr) { - u32 mbr_sig; - mbr_sig = read_mbr_sig(devno, &ei); - boot_params.edd_mbr_sig_buffer[devno-0x80] = mbr_sig; - } + if (do_mbr && !read_mbr_sig(devno, &ei, mbrptr++)) + boot_params.edd_mbr_sig_buf_entries = devno-0x80+1; } } diff --git a/arch/i386/boot/tty.c b/arch/i386/boot/tty.c index 9c668aad351..f3f14bd2637 100644 --- a/arch/i386/boot/tty.c +++ b/arch/i386/boot/tty.c @@ -54,9 +54,9 @@ static u8 gettime(void) u16 ax = 0x0200; u16 cx, dx; - asm("int $0x1a" - : "+a" (ax), "=c" (cx), "=d" (dx) - : : "ebx", "esi", "edi"); + asm volatile("int $0x1a" + : "+a" (ax), "=c" (cx), "=d" (dx) + : : "ebx", "esi", "edi"); return dx >> 8; } @@ -67,7 +67,7 @@ static u8 gettime(void) int getchar(void) { u16 ax = 0; - asm("int $0x16" : "+a" (ax)); + asm volatile("int $0x16" : "+a" (ax)); return ax & 0xff; } @@ -75,9 +75,9 @@ int getchar(void) static int kbd_pending(void) { u8 pending; - asm("int $0x16; setnz %0" - : "=rm" (pending) - : "a" (0x0100)); + asm volatile("int $0x16; setnz %0" + : "=rm" (pending) + : "a" (0x0100)); return pending; } diff --git a/arch/i386/boot/video-vga.c b/arch/i386/boot/video-vga.c index 700d09a9c9b..aef02f9ec0c 100644 --- a/arch/i386/boot/video-vga.c +++ b/arch/i386/boot/video-vga.c @@ -47,16 +47,16 @@ static u8 vga_set_basic_mode(void) #ifdef CONFIG_VIDEO_400_HACK if (adapter >= ADAPTER_VGA) { - asm(INT10 - : : "a" (0x1202), "b" (0x0030) - : "ecx", "edx", "esi", "edi"); + asm volatile(INT10 + : : "a" (0x1202), "b" (0x0030) + : "ecx", "edx", "esi", "edi"); } #endif ax = 0x0f00; - asm(INT10 - : "+a" (ax) - : : "ebx", "ecx", "edx", "esi", "edi"); + asm volatile(INT10 + : "+a" (ax) + : : "ebx", "ecx", "edx", "esi", "edi"); mode = (u8)ax; @@ -73,9 +73,10 @@ static u8 vga_set_basic_mode(void) mode = 3; /* Set the mode */ + ax = mode; asm volatile(INT10 - : : "a" (mode) - : "ebx", "ecx", "edx", "esi", "edi"); + : "+a" (ax) + : : "ebx", "ecx", "edx", "esi", "edi"); do_restore = 1; return mode; } diff --git a/arch/i386/boot/video.c b/arch/i386/boot/video.c index 958130ef004..693f20d3102 100644 --- a/arch/i386/boot/video.c +++ b/arch/i386/boot/video.c @@ -61,7 +61,7 @@ static void store_video_mode(void) /* Not all BIOSes are clean with respect to the top bit */ boot_params.screen_info.orig_video_mode = ax & 0x7f; - boot_params.screen_info.orig_video_page = page; + boot_params.screen_info.orig_video_page = page >> 8; } /* diff --git a/arch/i386/kernel/alternative.c b/arch/i386/kernel/alternative.c index 1b66d5c70ea..9f4ac8b02de 100644 --- a/arch/i386/kernel/alternative.c +++ b/arch/i386/kernel/alternative.c @@ -366,6 +366,8 @@ void apply_paravirt(struct paravirt_patch_site *start, unsigned int used; BUG_ON(p->len > MAX_PATCH_LEN); + /* prep the buffer with the original instructions */ + memcpy(insnbuf, p->instr, p->len); used = paravirt_ops.patch(p->instrtype, p->clobbers, insnbuf, (unsigned long)p->instr, p->len); diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index f9fff29e01a..3d67ae18d76 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -1085,7 +1085,7 @@ static int __init detect_init_APIC (void) if (l & MSR_IA32_APICBASE_ENABLE) mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; - if (nmi_watchdog != NMI_NONE) + if (nmi_watchdog != NMI_NONE && nmi_watchdog != NMI_DISABLED) nmi_watchdog = NMI_LOCAL_APIC; printk(KERN_INFO "Found and enabled local APIC!\n"); diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index 4b8a8da4b2e..e2f4a1c6854 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -754,14 +754,6 @@ static int pirq_entries [MAX_PIRQS]; static int pirqs_enabled; int skip_ioapic_setup; -static int __init ioapic_setup(char *str) -{ - skip_ioapic_setup = 1; - return 1; -} - -__setup("noapic", ioapic_setup); - static int __init ioapic_pirq_setup(char *str) { int i, max; diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 99beac7f96c..8c1c965eb2a 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -77,7 +77,7 @@ static int __init check_nmi_watchdog(void) unsigned int *prev_nmi_count; int cpu; - if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DEFAULT)) + if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) return 0; if (!atomic_read(&nmi_active)) @@ -424,7 +424,7 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, if (!!old_state == !!nmi_watchdog_enabled) return 0; - if (atomic_read(&nmi_active) < 0) { + if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) { printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); return -EIO; } diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c index debd7dbb415..a39280b4dd3 100644 --- a/arch/i386/kernel/tsc.c +++ b/arch/i386/kernel/tsc.c @@ -292,7 +292,6 @@ static struct clocksource clocksource_tsc = { void mark_tsc_unstable(char *reason) { - sched_clock_unstable_event(); if (!tsc_unstable) { tsc_unstable = 1; tsc_enabled = 0; diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c index 01ffdd4964f..fcb38e7f354 100644 --- a/arch/i386/mm/fault.c +++ b/arch/i386/mm/fault.c @@ -249,9 +249,10 @@ static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address) pmd_k = pmd_offset(pud_k, address); if (!pmd_present(*pmd_k)) return NULL; - if (!pmd_present(*pmd)) + if (!pmd_present(*pmd)) { set_pmd(pmd, *pmd_k); - else + arch_flush_lazy_mmu_mode(); + } else BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k)); return pmd_k; } diff --git a/arch/i386/xen/xen-head.S b/arch/i386/xen/xen-head.S index bc71f3bc401..f8d6937db2e 100644 --- a/arch/i386/xen/xen-head.S +++ b/arch/i386/xen/xen-head.S @@ -7,20 +7,20 @@ #include <asm/boot.h> #include <xen/interface/elfnote.h> - .section .init.text +.pushsection .init.text ENTRY(startup_xen) movl %esi,xen_start_info cld movl $(init_thread_union+THREAD_SIZE),%esp jmp xen_start_kernel +.popsection -.pushsection ".bss.page_aligned" +.pushsection .bss.page_aligned .align PAGE_SIZE_asm ENTRY(hypercall_page) .skip 0x1000 .popsection - .section .text ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS, .asciz "linux") ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION, .asciz "2.6") ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION, .asciz "xen-3.0") diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 21aa4fc5f8e..8c39913d172 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -327,17 +327,7 @@ config FORCE_CPEI_RETARGET This option it useful to enable this feature on older BIOS's as well. You can also enable this by using boot command line option force_cpei=1. -config PREEMPT - bool "Preemptible Kernel" - help - This option reduces the latency of the kernel when reacting to - real-time or interactive events by allowing a low priority process to - be preempted even if it is in kernel mode executing a system call. - This allows applications to run more reliably even when the system is - under load. - - Say Y here if you are building a kernel for a desktop, embedded - or real-time system. Say N if you are unsure. +source "kernel/Kconfig.preempt" source "mm/Kconfig" diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index 9eb48c0927b..6dd8655664f 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -42,7 +42,7 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 -CONFIG_SLAB=y +CONFIG_SLUB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 3a9ed951db0..e86fbd39c79 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -43,7 +43,7 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 -CONFIG_SLAB=y +CONFIG_SLUB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set diff --git a/arch/ia64/configs/sim_defconfig b/arch/ia64/configs/sim_defconfig index c420d9f3df9..546a772f438 100644 --- a/arch/ia64/configs/sim_defconfig +++ b/arch/ia64/configs/sim_defconfig @@ -43,7 +43,7 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 -CONFIG_SLAB=y +CONFIG_SLUB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 4c9ffc47bc7..9aecfceeb38 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -46,7 +46,7 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_SLAB=y +CONFIG_SLUB=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index 3dbb3987df2..797acf9066c 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -53,7 +53,7 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y +CONFIG_SLUB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 4a060fc3993..0a06b1333c9 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -48,7 +48,7 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_SLAB=y +CONFIG_SLUB=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 03172dc8c40..0210545e7f6 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -53,8 +53,7 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set diff --git a/arch/ia64/hp/sim/boot/boot_head.S b/arch/ia64/hp/sim/boot/boot_head.S index a9bd71ac78e..8808565491f 100644 --- a/arch/ia64/hp/sim/boot/boot_head.S +++ b/arch/ia64/hp/sim/boot/boot_head.S @@ -26,6 +26,7 @@ GLOBAL_ENTRY(_start) movl sp = stack_mem+16384-16 bsw.1 br.call.sptk.many rp=start_bootloader +0: nop 0 /* dummy nop to make unwinding work */ END(_start) /* diff --git a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c index 15c08d52f09..8c6ec707084 100644 --- a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c +++ b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c @@ -113,10 +113,8 @@ processor_get_freq ( saved_mask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(cpu)); - if (smp_processor_id() != cpu) { - ret = -EAGAIN; + if (smp_processor_id() != cpu) goto migrate_end; - } /* processor_get_pstate gets the instantaneous frequency */ ret = processor_get_pstate(&value); @@ -125,7 +123,7 @@ processor_get_freq ( set_cpus_allowed(current, saved_mask); printk(KERN_WARNING "get performance failed with error %d\n", ret); - ret = -EAGAIN; + ret = 0; goto migrate_end; } clock_freq = extract_clock(data, value, cpu); diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index cc3ee4ef37a..44be1c952b7 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -33,6 +33,11 @@ void ack_bad_irq(unsigned int irq) } #ifdef CONFIG_IA64_GENERIC +ia64_vector __ia64_irq_to_vector(int irq) +{ + return irq_cfg[irq].vector; +} + unsigned int __ia64_local_vector_to_irq (ia64_vector vec) { return __get_cpu_var(vector_irq)[vec]; diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index ff28620cb99..63b73f3d4c9 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -2018,22 +2018,26 @@ ia64_mca_late_init(void) if (cpe_vector >= 0) { /* If platform supports CPEI, enable the irq. */ - cpe_poll_enabled = 0; - for (irq = 0; irq < NR_IRQS; ++irq) - if (irq_to_vector(irq) == cpe_vector) { - desc = irq_desc + irq; - desc->status |= IRQ_PER_CPU; - setup_irq(irq, &mca_cpe_irqaction); - ia64_cpe_irq = irq; - } - ia64_mca_register_cpev(cpe_vector); - IA64_MCA_DEBUG("%s: CPEI/P setup and enabled.\n", __FUNCTION__); - } else { - /* If platform doesn't support CPEI, get the timer going. */ - if (cpe_poll_enabled) { - ia64_mca_cpe_poll(0UL); - IA64_MCA_DEBUG("%s: CPEP setup and enabled.\n", __FUNCTION__); + irq = local_vector_to_irq(cpe_vector); + if (irq > 0) { + cpe_poll_enabled = 0; + desc = irq_desc + irq; + desc->status |= IRQ_PER_CPU; + setup_irq(irq, &mca_cpe_irqaction); + ia64_cpe_irq = irq; + ia64_mca_register_cpev(cpe_vector); + IA64_MCA_DEBUG("%s: CPEI/P setup and enabled.\n", + __FUNCTION__); + return 0; } + printk(KERN_ERR "%s: Failed to find irq for CPE " + "interrupt handler, vector %d\n", + __FUNCTION__, cpe_vector); + } + /* If platform doesn't support CPEI, get the timer going. */ + if (cpe_poll_enabled) { + ia64_mca_cpe_poll(0UL); + IA64_MCA_DEBUG("%s: CPEP setup and enabled.\n", __FUNCTION__); } } #endif diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index 4158906c45a..c613fc0e91c 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -198,9 +198,13 @@ default_idle (void) { local_irq_enable(); while (!need_resched()) { - if (can_do_pal_halt) - safe_halt(); - else + if (can_do_pal_halt) { + local_irq_disable(); + if (!need_resched()) { + safe_halt(); + } + local_irq_enable(); + } else cpu_relax(); } } diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 00f80324694..122444a9789 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -951,10 +951,14 @@ access_uarea (struct task_struct *child, unsigned long addr, return 0; case PT_CR_IPSR: - if (write_access) - pt->cr_ipsr = ((*data & IPSR_MASK) + if (write_access) { + unsigned long tmp = *data; + /* psr.ri==3 is a reserved value: SDM 2:25 */ + if ((tmp & IA64_PSR_RI) == IA64_PSR_RI) + tmp &= ~IA64_PSR_RI; + pt->cr_ipsr = ((tmp & IPSR_MASK) | (pt->cr_ipsr & ~IPSR_MASK)); - else + } else *data = (pt->cr_ipsr & IPSR_MASK); return 0; diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index cd9a37a552c..407efea04bf 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -389,6 +389,13 @@ early_console_setup (char *cmdline) if (!efi_setup_pcdp_console(cmdline)) earlycons++; #endif +#ifdef CONFIG_HP_SIMSERIAL_CONSOLE + { + extern struct console hpsim_cons; + register_console(&hpsim_cons); + earlycons++; + } +#endif return (earlycons) ? 0 : -1; } diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index 83e80677de7..00232b4357b 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -20,6 +20,8 @@ PHDRS { code PT_LOAD; percpu PT_LOAD; data PT_LOAD; + note PT_NOTE; + unwind 0x70000001; /* PT_IA_64_UNWIND, but ld doesn't match the name */ } SECTIONS { @@ -62,6 +64,9 @@ SECTIONS /* Read-only data */ + NOTES :code :note /* put .notes in text and mark in PT_NOTE */ + code_continues : {} :code /* switch back to regular program... */ + /* Exception table */ . = ALIGN(16); __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) @@ -99,7 +104,8 @@ SECTIONS __start_unwind = .; *(.IA_64.unwind*) __end_unwind = .; - } + } :code :unwind + code_continues2 : {} : code RODATA @@ -276,10 +282,6 @@ SECTIONS .debug_typenames 0 : { *(.debug_typenames) } .debug_varnames 0 : { *(.debug_varnames) } /* These must appear regardless of . */ - /* Discard them for now since Intel SoftSDV cannot handle them. - .comment 0 : { *(.comment) } - .note 0 : { *(.note) } - */ /DISCARD/ : { *(.comment) } /DISCARD/ : { *(.note) } } diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c index 73ccb6010c0..9150ffaff9e 100644 --- a/arch/ia64/mm/fault.c +++ b/arch/ia64/mm/fault.c @@ -112,11 +112,17 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re down_read(&mm->mmap_sem); vma = find_vma_prev(mm, address, &prev_vma); - if (!vma) + if (!vma && !prev_vma ) goto bad_area; - /* find_vma_prev() returns vma such that address < vma->vm_end or NULL */ - if (address < vma->vm_start) + /* + * find_vma_prev() returns vma such that address < vma->vm_end or NULL + * + * May find no vma, but could be that the last vm area is the + * register backing store that needs to expand upwards, in + * this case vma will be null, but prev_vma will ne non-null + */ + if (( !vma && prev_vma ) || (address < vma->vm_start) ) goto check_expansion; good_area: @@ -172,6 +178,8 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re check_expansion: if (!(prev_vma && (prev_vma->vm_flags & VM_GROWSUP) && (address == prev_vma->vm_end))) { + if (!vma) + goto bad_area; if (!(vma->vm_flags & VM_GROWSDOWN)) goto bad_area; if (REGION_NUMBER(address) != REGION_NUMBER(vma->vm_start) diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 7f6d2360a26..36004738944 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -256,6 +256,13 @@ struct irq_chip irq_type_sn = { .set_affinity = sn_set_affinity_irq }; +ia64_vector sn_irq_to_vector(int irq) +{ + if (irq >= IA64_NUM_VECTORS) + return 0; + return (ia64_vector)irq; +} + unsigned int sn_local_vector_to_irq(u8 vector) { return (CPU_VECTOR_TO_IRQ(smp_processor_id(), vector)); @@ -398,7 +405,10 @@ sn_call_force_intr_provider(struct sn_irq_info *sn_irq_info) struct sn_pcibus_provider *pci_provider; pci_provider = sn_pci_provider[sn_irq_info->irq_bridge_type]; - if (pci_provider && pci_provider->force_interrupt) + + /* Don't force an interrupt if the irq has been disabled */ + if (!(irq_desc[sn_irq_info->irq_irq].status & IRQ_DISABLED) && + pci_provider && pci_provider->force_interrupt) (*pci_provider->force_interrupt)(sn_irq_info); } diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c index 7e6d5fb7539..ed3a4caec62 100644 --- a/arch/m68k/kernel/setup.c +++ b/arch/m68k/kernel/setup.c @@ -62,7 +62,6 @@ EXPORT_SYMBOL(m68k_num_memory); int m68k_realnum_memory; EXPORT_SYMBOL(m68k_realnum_memory); unsigned long m68k_memoffset; -EXPORT_SYMBOL(m68k_memoffset); struct mem_info m68k_memory[NUM_MEMINFO]; EXPORT_SYMBOL(m68k_memory); @@ -200,7 +199,6 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record) (m68k_num_memory - 1)); m68k_num_memory = 1; } - m68k_memoffset = m68k_memory[0].addr-PAGE_OFFSET; #endif } diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds index c42245775a4..59fe285865e 100644 --- a/arch/m68k/kernel/vmlinux-std.lds +++ b/arch/m68k/kernel/vmlinux-std.lds @@ -19,6 +19,8 @@ SECTIONS *(.gnu.warning) } :text = 0x4e75 + _etext = .; /* End of text section */ + . = ALIGN(16); /* Exception table */ __start___ex_table = .; __ex_table : { *(__ex_table) } @@ -26,8 +28,6 @@ SECTIONS RODATA - _etext = .; /* End of text section */ - .data : { /* Data */ DATA_DATA CONSTRUCTORS diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c index 7d571a2b44d..30d34f28502 100644 --- a/arch/m68k/mm/motorola.c +++ b/arch/m68k/mm/motorola.c @@ -210,11 +210,7 @@ void __init paging_init(void) int i; #ifdef DEBUG - { - extern unsigned long availmem; - printk ("start of paging_init (%p, %lx)\n", - kernel_pg_dir, availmem); - } + printk ("start of paging_init (%p, %lx)\n", kernel_pg_dir, availmem); #endif /* Fix the cache mode in the page descriptors for the 680[46]0. */ diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c index 846f9753468..47502d5ec19 100644 --- a/arch/m68knommu/kernel/process.c +++ b/arch/m68knommu/kernel/process.c @@ -28,6 +28,7 @@ #include <linux/a.out.h> #include <linux/interrupt.h> #include <linux/reboot.h> +#include <linux/fs.h> #include <asm/uaccess.h> #include <asm/system.h> diff --git a/arch/m68knommu/kernel/sys_m68k.c b/arch/m68knommu/kernel/sys_m68k.c index 48e6b33e8b4..15d62c5279a 100644 --- a/arch/m68knommu/kernel/sys_m68k.c +++ b/arch/m68knommu/kernel/sys_m68k.c @@ -18,6 +18,7 @@ #include <linux/mman.h> #include <linux/file.h> #include <linux/utsname.h> +#include <linux/fs.h> #include <asm/setup.h> #include <asm/uaccess.h> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 3b404b7dfa3..04797b289c2 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -28,7 +28,6 @@ config BASLER_EXCITE select MIPS_RM9122 select SYS_HAS_CPU_RM9000 select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_KGDB help @@ -126,6 +125,7 @@ config LEMOTE_FULONG select SYS_SUPPORTS_HIGHMEM select SYS_HAS_EARLY_PRINTK select GENERIC_HARDIRQS_NO__DO_IRQ + select GENERIC_ISA_DMA_SUPPORT_BROKEN select CPU_HAS_WB help Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and @@ -192,8 +192,7 @@ config MIPS_MALTA board. config MIPS_SEAD - bool "MIPS SEAD board (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "MIPS SEAD board" select IRQ_CPU select DMA_NONCOHERENT select SYS_HAS_EARLY_PRINTK @@ -528,6 +527,7 @@ config TOSHIBA_JMR3927 select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_TX3927 + select IRQ_TXX9 select SWAP_IO_SPACE select SYS_HAS_CPU_TX39XX select SYS_SUPPORTS_32BIT_KERNEL @@ -540,7 +540,9 @@ config TOSHIBA_RBTX4927 select DMA_NONCOHERENT select HAS_TXX9_SERIAL select HW_HAS_PCI - select I8259 + select IRQ_CPU + select IRQ_TXX9 + select I8259 if TOSHIBA_FPCIB0 select SWAP_IO_SPACE select SYS_HAS_CPU_TX49XX select SYS_SUPPORTS_32BIT_KERNEL @@ -555,12 +557,11 @@ config TOSHIBA_RBTX4927 config TOSHIBA_RBTX4938 bool "Toshiba RBTX4938 board" - select HAVE_STD_PC_SERIAL_PORT select DMA_NONCOHERENT - select GENERIC_ISA_DMA select HAS_TXX9_SERIAL select HW_HAS_PCI - select I8259 + select IRQ_CPU + select IRQ_TXX9 select SWAP_IO_SPACE select SYS_HAS_CPU_TX49XX select SYS_SUPPORTS_32BIT_KERNEL @@ -604,7 +605,6 @@ source "arch/mips/sibyte/Kconfig" source "arch/mips/tx4927/Kconfig" source "arch/mips/tx4938/Kconfig" source "arch/mips/vr41xx/Kconfig" -source "arch/mips/philips/pnx8550/common/Kconfig" endmenu @@ -693,9 +693,9 @@ config EARLY_PRINTK config SYS_HAS_EARLY_PRINTK bool -config GENERIC_ISA_DMA +config HOTPLUG_CPU bool - select ZONE_DMA + default n config I8259 bool @@ -712,9 +712,13 @@ config MIPS_DISABLE_OBSOLETE_IDE config NO_IOPORT def_bool n +config GENERIC_ISA_DMA + bool + select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n + config GENERIC_ISA_DMA_SUPPORT_BROKEN bool - select ZONE_DMA + select GENERIC_ISA_DMA config GENERIC_GPIO bool @@ -768,6 +772,9 @@ config IRQ_MSP_SLP config IRQ_MSP_CIC bool +config IRQ_TXX9 + bool + config MIPS_BOARDS_GEN bool @@ -1427,8 +1434,7 @@ config SB1_PASS_2_1_WORKAROUNDS default y config 64BIT_PHYS_ADDR - bool "Support for 64-bit physical address space" - depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT + bool config CPU_HAS_LLSC bool diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig index abea8809825..29c95d97217 100644 --- a/arch/mips/au1000/Kconfig +++ b/arch/mips/au1000/Kconfig @@ -136,6 +136,7 @@ config SOC_AU1200 config SOC_AU1X00 bool + select 64BIT_PHYS_ADDR select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_APM_EMULATION diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c index 7abe4209943..8527856aec4 100644 --- a/arch/mips/au1000/common/gpio.c +++ b/arch/mips/au1000/common/gpio.c @@ -131,12 +131,12 @@ int au1xxx_gpio_direction_input(unsigned gpio) { if (gpio >= AU1XXX_GPIO_BASE) #if defined(CONFIG_SOC_AU1000) - ; + return -ENODEV; #else return au1xxx_gpio2_direction_input(gpio); #endif - else - return au1xxx_gpio1_direction_input(gpio); + + return au1xxx_gpio1_direction_input(gpio); } EXPORT_SYMBOL(au1xxx_gpio_direction_input); @@ -145,12 +145,12 @@ int au1xxx_gpio_direction_output(unsigned gpio, int value) { if (gpio >= AU1XXX_GPIO_BASE) #if defined(CONFIG_SOC_AU1000) - ; + return -ENODEV; #else return au1xxx_gpio2_direction_output(gpio, value); #endif - else - return au1xxx_gpio1_direction_output(gpio, value); + + return au1xxx_gpio1_direction_output(gpio, value); } EXPORT_SYMBOL(au1xxx_gpio_direction_output); diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 67a80f4c7d8..700a3a2d688 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -663,8 +663,8 @@ CONFIG_MOXA_SMARTIO_NEW=m # CONFIG_SX is not set # CONFIG_RIO is not set # CONFIG_STALDRV is not set -CONFIG_SIBYTE_SB1250_DUART=y -CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y +CONFIG_SERIAL_SB1250_DUART=y +CONFIG_SERIAL_SB1250_DUART_CONSOLE=y # # Serial drivers diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index 4dc3197e2e9..8ecbbb226c7 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -1,60 +1,47 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:22 2007 +# Linux kernel version: 2.6.23-rc2 +# Wed Aug 8 10:23:16 2007 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +CONFIG_MACH_VR41XX=y # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -CONFIG_MACH_VR41XX=y +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set # CONFIG_CASIO_E55 is not set # CONFIG_IBM_WORKPAD is not set # CONFIG_NEC_CMBVR4133 is not set @@ -73,6 +60,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y @@ -82,6 +71,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -103,7 +93,6 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_VR41XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y @@ -119,7 +108,6 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -133,48 +121,47 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set +CONFIG_HZ_250=y # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -187,32 +174,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -232,16 +217,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # @@ -254,10 +236,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_PM is not set # # Networking @@ -267,7 +246,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -309,20 +287,13 @@ CONFIG_TCP_MD5SIG=y # CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -348,7 +319,17 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -361,30 +342,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# +# CONFIG_CONNECTOR is not set # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -397,19 +358,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y @@ -424,15 +375,16 @@ CONFIG_BLK_DEV_IDEDISK=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -440,16 +392,9 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set # @@ -460,30 +405,17 @@ CONFIG_IDE_GENERIC=y # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# CONFIG_PHYLIB=m # @@ -497,22 +429,16 @@ CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m # CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y @@ -521,6 +447,7 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set +# CONFIG_TC35815 is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set @@ -539,50 +466,15 @@ CONFIG_8139TOO_PIO=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -592,15 +484,7 @@ CONFIG_NETXEN_NIC=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -608,6 +492,7 @@ CONFIG_NETXEN_NIC=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -624,6 +509,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -658,34 +544,17 @@ CONFIG_SERIAL_VR41XX_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -693,32 +562,33 @@ CONFIG_GPIO_VR41XX=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # @@ -726,65 +596,16 @@ CONFIG_GPIO_VR41XX=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# -# CONFIG_HID is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -798,18 +619,29 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# # -# RTC drivers +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_VR41XX=y -# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_VR41XX=y + +# # DMA Engine support # # CONFIG_DMA_ENGINE is not set @@ -823,12 +655,9 @@ CONFIG_RTC_DRV_VR41XX=y # # -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -836,8 +665,14 @@ CONFIG_RTC_DRV_VR41XX=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y @@ -852,7 +687,7 @@ CONFIG_INOTIFY_USER=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y -CONFIG_FUSE_FS=m +# CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y # @@ -879,7 +714,7 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -905,14 +740,12 @@ CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set +# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y -CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -920,7 +753,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -936,10 +768,7 @@ CONFIG_MSDOS_PARTITION=y # # Distributed Lock Manager # -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set +# CONFIG_DLM is not set # # Profiling support @@ -957,7 +786,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=32M console=ttyVR0,38400" @@ -966,10 +794,6 @@ CONFIG_CMDLINE="mem=32M console=ttyVR0,38400" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m @@ -990,6 +814,7 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=m +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m @@ -1008,10 +833,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=m # CONFIG_CRYPTO_CRC32C is not set CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO_HW is not set # # Library routines @@ -1019,10 +841,13 @@ CONFIG_CRYPTO_CAMELLIA=m CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 6d6a01b9a81..ebcb7ad8814 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc2 -# Fri May 25 11:17:29 2007 +# Linux kernel version: 2.6.23-rc2 +# Tue Aug 7 22:12:54 2007 # CONFIG_MIPS=y @@ -13,33 +13,35 @@ CONFIG_MIPS=y CONFIG_MIPS_COBALT=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -54,6 +56,7 @@ CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_EARLY_PRINTK=y CONFIG_SYS_HAS_EARLY_PRINTK=y CONFIG_I8259=y +# CONFIG_NO_IOPORT is not set # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y @@ -64,6 +67,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -101,7 +105,6 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -117,43 +120,40 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set +CONFIG_HZ_250=y # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 @@ -185,19 +185,17 @@ CONFIG_SLAB=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -236,10 +234,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_PM is not set # # Networking @@ -286,20 +281,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -335,6 +318,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -347,12 +331,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y +# CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -430,20 +409,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -453,17 +420,11 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_PHANTOM is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set +# CONFIG_MISC_DEVICES is not set # CONFIG_IDE is not set # @@ -471,6 +432,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_RAID_ATTRS=y CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -492,6 +454,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -499,45 +462,8 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_ESP_CORE is not set -# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set @@ -593,10 +519,6 @@ CONFIG_ATA=y CONFIG_PATA_VIA=y # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set # @@ -612,41 +534,24 @@ CONFIG_PATA_VIA=y # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# CONFIG_NET_TULIP=y CONFIG_DE2104X=y CONFIG_TULIP=y @@ -661,10 +566,6 @@ CONFIG_TULIP=y # CONFIG_NET_PCI is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Token Ring devices -# # CONFIG_TR is not set # @@ -672,6 +573,16 @@ CONFIG_TULIP=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -682,15 +593,7 @@ CONFIG_TULIP=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -698,6 +601,7 @@ CONFIG_TULIP=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y # # Userland interfaces @@ -705,7 +609,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # @@ -725,7 +629,6 @@ CONFIG_INPUT_COBALT_BTNS=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set -CONFIG_INPUT_POLLDEV=y # # Hardware I/O ports @@ -761,24 +664,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set CONFIG_COBALT_LCD=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set @@ -788,11 +682,8 @@ CONFIG_DEVPORT=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # @@ -817,6 +708,7 @@ CONFIG_DEVPORT=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # @@ -829,55 +721,131 @@ CONFIG_DUMMY_CONSOLE=y # Sound # # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set # -# HID Devices +# USB Input Devices # -# CONFIG_HID is not set +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set # -# USB support +# USB HID Boot Protocol drivers # +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # -# USB Gadget Support +# may also be needed; see USB_STORAGE Help for more information # -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set # -# LED devices +# USB Imaging devices # -# CONFIG_NEW_LEDS is not set +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y # -# LED drivers +# USB port drivers # # -# LED Triggers +# USB Serial Converter support # +# CONFIG_USB_SERIAL is not set # -# InfiniBand support +# USB Miscellaneous drivers # -# CONFIG_INFINIBAND is not set +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# USB DSL modem support # # -# Real Time Clock +# USB Gadget Support # +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -894,10 +862,6 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_TEST is not set # -# I2C RTC drivers -# - -# # SPI RTC drivers # @@ -906,8 +870,10 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -928,6 +894,11 @@ CONFIG_RTC_DRV_CMOS=y # # +# Userspace I/O +# +# CONFIG_UIO is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -1032,7 +1003,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1074,10 +1044,6 @@ CONFIG_CMDLINE="" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # @@ -1088,6 +1054,7 @@ CONFIG_BITREVERSE=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index 5467d750b6e..d0d07faeb84 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -1,60 +1,47 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:28 2007 +# Linux kernel version: 2.6.23-rc2 +# Wed Aug 8 10:36:25 2007 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +CONFIG_MACH_VR41XX=y # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -CONFIG_MACH_VR41XX=y +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set CONFIG_CASIO_E55=y # CONFIG_IBM_WORKPAD is not set # CONFIG_NEC_CMBVR4133 is not set @@ -72,6 +59,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y @@ -81,6 +70,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -102,7 +92,6 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_VR41XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y @@ -118,7 +107,6 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -132,45 +120,44 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set +CONFIG_HZ_250=y # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -183,32 +170,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -226,6 +211,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_ISA=y CONFIG_MMU=y @@ -234,10 +220,6 @@ CONFIG_MMU=y # # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y @@ -247,10 +229,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_PM is not set # # Networking @@ -267,46 +246,18 @@ CONFIG_PM=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# # CONFIG_PNP is not set -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set -CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# Misc devices -# - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y @@ -321,15 +272,16 @@ CONFIG_BLK_DEV_IDEDISK=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_IDE_ARM is not set # CONFIG_IDE_CHIPSETS is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -337,43 +289,10 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# ISDN subsystem -# - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -381,14 +300,12 @@ CONFIG_IDE_GENERIC=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set @@ -400,6 +317,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -433,45 +351,16 @@ CONFIG_SERIAL_VR41XX_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set - -# -# ISA-based Watchdog Cards -# -# CONFIG_PCWATCHDOG is not set -# CONFIG_MIXCOMWD is not set -# CONFIG_WDT is not set +# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -479,31 +368,32 @@ CONFIG_GPIO_VR41XX=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # @@ -512,65 +402,49 @@ CONFIG_GPIO_VR41XX=y # CONFIG_VGA_CONSOLE is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# LED drivers +# RTC interfaces # +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# LED Triggers +# SPI RTC drivers # # -# InfiniBand support +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# on-CPU RTC drivers # - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_DRV_VR41XX=y # # DMA Engine support @@ -586,12 +460,9 @@ CONFIG_HID=y # # -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -599,8 +470,14 @@ CONFIG_HID=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y @@ -614,7 +491,7 @@ CONFIG_INOTIFY_USER=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y -CONFIG_FUSE_FS=m +# CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y # @@ -687,7 +564,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M" @@ -696,10 +572,6 @@ CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # @@ -707,8 +579,11 @@ CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M" # # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 934d8a00893..670039bb1a7 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:32 2007 +# Linux kernel version: 2.6.23-rc2 +# Tue Aug 7 12:39:49 2007 # CONFIG_MIPS=y @@ -9,52 +9,40 @@ CONFIG_MIPS=y # Machine selection # CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set CONFIG_SGI_IP22=y # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -67,6 +55,9 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARC=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set @@ -82,6 +73,7 @@ CONFIG_ARC_PROMLIB=y # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -122,8 +114,6 @@ CONFIG_IP22_CPU_SCACHE=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -139,6 +129,8 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -152,35 +144,33 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -193,32 +183,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -237,6 +225,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_EISA=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_EISA is not set CONFIG_MMU=y @@ -245,10 +234,6 @@ CONFIG_MMU=y # # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y @@ -261,7 +246,7 @@ CONFIG_TRAD_SIGNALS=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_SUSPEND is not set # # Networking @@ -271,7 +256,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -308,10 +292,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# CONFIG_IP_VS=m # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12 @@ -346,10 +326,11 @@ CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=y +CONFIG_IPV6_MIP6=m CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m @@ -371,8 +352,6 @@ CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set CONFIG_NF_CONNTRACK=m CONFIG_NF_CT_ACCT=y CONFIG_NF_CONNTRACK_MARK=y @@ -380,6 +359,7 @@ CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_GRE=m CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m @@ -398,11 +378,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m @@ -423,6 +405,7 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # @@ -490,25 +473,13 @@ CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -527,9 +498,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_NET_SCHED=y CONFIG_NET_SCH_FIFO=y -# CONFIG_NET_SCH_CLK_JIFFIES is not set -CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y -# CONFIG_NET_SCH_CLK_CPU is not set # # Queueing/Scheduling @@ -538,6 +506,7 @@ CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RR=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -562,10 +531,16 @@ CONFIG_NET_CLS_U32=m CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=y +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m CONFIG_NET_CLS_POLICE=y # CONFIG_NET_CLS_IND is not set -CONFIG_NET_ESTIMATOR=y # # Network testing @@ -574,14 +549,26 @@ CONFIG_NET_ESTIMATOR=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=m +# CONFIG_MAC80211_DEBUG is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_IEEE80211_SOFTMAC=m # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y -CONFIG_FIB_RULES=y +CONFIG_RFKILL=m +CONFIG_RFKILL_INPUT=m +# CONFIG_NET_9P is not set # # Device Drivers @@ -593,47 +580,19 @@ CONFIG_FIB_RULES=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set # CONFIG_IDE is not set # @@ -641,6 +600,7 @@ CONFIG_ATA_OVER_ETH=m # CONFIG_RAID_ATTRS=m CONFIG_SCSI=y +CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -663,6 +623,7 @@ CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -670,51 +631,21 @@ CONFIG_SCSI_SCAN_ASYNC=y CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_SGIWD93_SCSI=y # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_IFB is not set CONFIG_DUMMY=m CONFIG_BONDING=m +CONFIG_MACVLAN=m CONFIG_EQUALIZER=m CONFIG_TUN=m - -# -# PHY device support -# CONFIG_PHYLIB=m # @@ -728,36 +659,25 @@ CONFIG_CICADA_PHY=m # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_AX88796 is not set # CONFIG_DM9000 is not set CONFIG_SGISEEQ=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +CONFIG_WLAN_PRE80211=y +CONFIG_STRIP=m +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +CONFIG_HOSTAP=m +# CONFIG_HOSTAP_FIRMWARE is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -765,15 +685,7 @@ CONFIG_SGISEEQ=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -781,6 +693,7 @@ CONFIG_SGISEEQ=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -806,9 +719,16 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2_ALPS is not set +CONFIG_MOUSE_PS2_LOGIPS2PP=y +# CONFIG_MOUSE_PS2_SYNAPTICS is not set +# CONFIG_MOUSE_PS2_LIFEBOOK is not set +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -844,15 +764,7 @@ CONFIG_SERIAL_CORE=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -864,20 +776,10 @@ CONFIG_INDYDOG=m # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set CONFIG_SGI_DS1286=m -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=256 - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -885,32 +787,33 @@ CONFIG_MAX_RAW_DEVS=256 # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # @@ -920,31 +823,20 @@ CONFIG_FIRMWARE_EDID=y CONFIG_SGI_NEWPORT_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_SGI_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -957,36 +849,8 @@ CONFIG_HID=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set # @@ -1003,12 +867,9 @@ CONFIG_HID=y # # -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -1121,6 +982,7 @@ CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1136,7 +998,6 @@ CONFIG_CIFS=m CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1158,6 +1019,7 @@ CONFIG_SGI_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -1207,8 +1069,6 @@ CONFIG_NLS_UTF8=m # Distributed Lock Manager # CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set # CONFIG_DLM_DEBUG is not set # @@ -1227,7 +1087,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1237,12 +1096,9 @@ CONFIG_CMDLINE="" CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ABLKCIPHER=m CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y @@ -1261,6 +1117,7 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m @@ -1279,10 +1136,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO_HW is not set # # Library routines @@ -1290,7 +1144,9 @@ CONFIG_CRYPTO_CAMELLIA=m CONFIG_BITREVERSE=m # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=m +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m @@ -1301,3 +1157,4 @@ CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index eb35f7518d0..49bcc58929b 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -1,66 +1,52 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:32 2007 +# Linux kernel version: 2.6.23-rc2 +# Tue Aug 7 13:04:24 2007 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set CONFIG_SGI_IP27=y # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set CONFIG_SGI_SN_M_MODE=y # CONFIG_SGI_SN_N_MODE is not set # CONFIG_MAPPED_KERNEL is not set # CONFIG_REPLICATE_KTEXT is not set # CONFIG_REPLICATE_EXHANDLERS is not set -CONFIG_EARLY_PRINTK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -72,6 +58,9 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_ARC=y CONFIG_DMA_IP27=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_NO_IOPORT is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y @@ -82,6 +71,7 @@ CONFIG_BOOT_ELF64=y # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -119,7 +109,6 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -141,7 +130,8 @@ CONFIG_NEED_MULTIPLE_NODES=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_NR_CPUS_DEFAULT_64=y @@ -161,36 +151,34 @@ CONFIG_PREEMPT_NONE=y CONFIG_PREEMPT_BKL=y # CONFIG_MIPS_INSANE_LARGE is not set # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 CONFIG_CPUSETS=y CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -203,18 +191,19 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -222,12 +211,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -248,16 +234,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_HW_HAS_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # @@ -279,7 +262,6 @@ CONFIG_BINFMT_ELF32=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set # # Networking @@ -289,7 +271,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -331,20 +312,13 @@ CONFIG_TCP_MD5SIG=y # CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -363,9 +337,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_NET_SCHED=y CONFIG_NET_SCH_FIFO=y -# CONFIG_NET_SCH_CLK_JIFFIES is not set -CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y -# CONFIG_NET_SCH_CLK_CPU is not set # # Queueing/Scheduling @@ -374,6 +345,7 @@ CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RR=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -398,10 +370,15 @@ CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=y +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_PEDIT=m +# CONFIG_NET_ACT_SIMP is not set CONFIG_NET_CLS_POLICE=y # CONFIG_NET_CLS_IND is not set -CONFIG_NET_ESTIMATOR=y # # Network testing @@ -410,13 +387,24 @@ CONFIG_NET_ESTIMATOR=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=m +# CONFIG_MAC80211_DEBUG is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_IEEE80211_SOFTMAC=m # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +CONFIG_RFKILL=m +# CONFIG_NET_9P is not set # # Device Drivers @@ -429,30 +417,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -463,21 +431,11 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set # CONFIG_IDE is not set # @@ -485,6 +443,7 @@ CONFIG_SGI_IOC4=m # CONFIG_RAID_ATTRS=m CONFIG_SCSI=y +CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y @@ -507,6 +466,7 @@ CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -517,10 +477,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -551,15 +508,7 @@ CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=m @@ -578,6 +527,8 @@ CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_EMC=m +CONFIG_DM_MULTIPATH_RDAC=m +# CONFIG_DM_DELAY is not set # # Fusion MPT device support @@ -590,30 +541,18 @@ CONFIG_DM_MULTIPATH_EMC=m # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +CONFIG_NETDEVICES_MULTIQUEUE=y +CONFIG_IFB=m # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +CONFIG_MACVLAN=m # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# CONFIG_PHYLIB=m # @@ -627,30 +566,21 @@ CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m # CONFIG_BROADCOM_PHY is not set +CONFIG_ICPLUS_PHY=m # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_AX88796=m CONFIG_SGI_IOC3_ETH=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set @@ -661,35 +591,57 @@ CONFIG_SGI_IOC3_ETH=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set +CONFIG_VIA_VELOCITY=m # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_QLA3XXX=m # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_MLX4_CORE is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_IPW2100=m +CONFIG_IPW2100_MONITOR=y +CONFIG_IPW2100_DEBUG=y +CONFIG_IPW2200=m +CONFIG_IPW2200_MONITOR=y +CONFIG_IPW2200_RADIOTAP=y +CONFIG_IPW2200_PROMISCUOUS=y +CONFIG_IPW2200_QOS=y +CONFIG_IPW2200_DEBUG=y +CONFIG_LIBERTAS=m +# CONFIG_LIBERTAS_DEBUG is not set +CONFIG_HERMES=m +CONFIG_PLX_HERMES=m +CONFIG_TMD_HERMES=m +CONFIG_NORTEL_HERMES=m +CONFIG_PCI_HERMES=m +CONFIG_ATMEL=m +CONFIG_PCI_ATMEL=m +CONFIG_PRISM54=m +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_BCM43XX=m +CONFIG_BCM43XX_DEBUG=y +CONFIG_BCM43XX_DMA=y +CONFIG_BCM43XX_PIO=y +CONFIG_BCM43XX_DMA_AND_PIO_MODE=y +# CONFIG_BCM43XX_DMA_MODE is not set +# CONFIG_BCM43XX_PIO_MODE is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -700,15 +652,7 @@ CONFIG_NETXEN_NIC=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -756,34 +700,17 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=m # CONFIG_RTC is not set CONFIG_SGI_IP27_RTC=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -791,43 +718,40 @@ CONFIG_SGI_IP27_RTC=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y @@ -841,37 +765,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set # @@ -888,12 +784,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +CONFIG_UIO=y +# CONFIG_UIO_CIF is not set # # File systems @@ -992,6 +886,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -999,7 +894,6 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1021,6 +915,7 @@ CONFIG_SGI_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -1031,8 +926,6 @@ CONFIG_SGI_PARTITION=y # Distributed Lock Manager # CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set # CONFIG_DLM_DEBUG is not set # @@ -1051,7 +944,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" CONFIG_SYS_SUPPORTS_KGDB=y @@ -1062,12 +954,13 @@ CONFIG_SYS_SUPPORTS_KGDB=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ABLKCIPHER=m CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y @@ -1086,6 +979,7 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m @@ -1104,21 +998,21 @@ CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -CONFIG_CRC16=m +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 95a72d2750e..eb96791c33e 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -1,60 +1,47 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc3 -# Thu Mar 15 00:40:40 2007 +# Linux kernel version: 2.6.23-rc1 +# Thu Aug 2 23:07:36 2007 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set CONFIG_TOSHIBA_JMR3927=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -66,10 +53,12 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_NO_IOPORT is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_TXX9=y CONFIG_MIPS_TX3927=y CONFIG_SWAP_IO_SPACE=y CONFIG_MIPS_L1_CACHE_SHIFT=5 @@ -77,6 +66,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -112,21 +102,17 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -139,37 +125,30 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # -CONFIG_EXPERIMENTAL=y +# CONFIG_EXPERIMENTAL is not set CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y @@ -181,23 +160,20 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# # CONFIG_MODULES is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set @@ -221,6 +197,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y # @@ -228,10 +205,6 @@ CONFIG_MMU=y # # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y @@ -251,7 +224,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -266,7 +238,6 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -280,38 +251,17 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing @@ -325,7 +275,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -337,34 +294,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -372,16 +308,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set # CONFIG_IDE is not set # @@ -389,16 +316,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set # @@ -409,46 +329,28 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# An alternative FireWire stack is available with EXPERIMENTAL=y # +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y @@ -464,76 +366,28 @@ CONFIG_TC35815=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set -# CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -541,6 +395,7 @@ CONFIG_TC35815=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -557,6 +412,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -607,33 +463,15 @@ CONFIG_SERIAL_TXX9_STDSERIAL=y # CONFIG_UNIX98_PTYS is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -641,17 +479,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set # # Multifunction device drivers @@ -662,75 +492,31 @@ CONFIG_LEGACY_PTY_COUNT=256 # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# -# CONFIG_HID is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -744,17 +530,28 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# # -# RTC drivers +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_DS1742=y # CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # +# on-CPU RTC drivers +# + +# # DMA Engine support # # CONFIG_DMA_ENGINE is not set @@ -768,24 +565,19 @@ CONFIG_RTC_DRV_DS1742=y # # -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -820,18 +612,11 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -844,21 +629,16 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -872,16 +652,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -892,7 +662,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -901,10 +670,6 @@ CONFIG_CMDLINE="" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # @@ -913,8 +678,11 @@ CONFIG_CMDLINE="" CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index fbfa5685887..fbd2d802fdf 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Sun Feb 18 21:27:55 2007 +# Linux kernel version: 2.6.23-rc2 +# Tue Aug 7 12:59:29 2007 # CONFIG_MIPS=y @@ -9,52 +9,40 @@ CONFIG_MIPS=y # Machine selection # CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set CONFIG_MIPS_MALTA=y # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -67,25 +55,28 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_I8259=y CONFIG_MIPS_BONITO64=y CONFIG_MIPS_MSC=y +# CONFIG_NO_IOPORT is not set # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y CONFIG_MIPS_BOARDS_GEN=y -CONFIG_MIPS_GT64120=y +CONFIG_PCI_GT64XXX_PCI0=y CONFIG_SWAP_IO_SPACE=y CONFIG_BOOT_ELF32=y CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_HAVE_STD_PC_SERIAL_PORT=y # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set CONFIG_CPU_MIPS32_R2=y # CONFIG_CPU_MIPS64_R1 is not set @@ -131,14 +122,14 @@ CONFIG_CPU_HAS_PREFETCH=y # CONFIG_MIPS_MT_DISABLED is not set CONFIG_MIPS_MT_SMP=y # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_MIPS_MT=y CONFIG_SYS_SUPPORTS_MULTITHREADING=y CONFIG_MIPS_MT_FPAFF=y -# CONFIG_64BIT_PHYS_ADDR is not set +# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_LLSC=y # CONFIG_CPU_HAS_SMARTMIPS is not set CONFIG_CPU_MIPSR2_IRQ_VI=y +CONFIG_CPU_MIPSR2_IRQ_EI=y CONFIG_CPU_MIPSR2_SRS=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -157,8 +148,11 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y +CONFIG_NR_CPUS_DEFAULT_2=y CONFIG_NR_CPUS=2 # CONFIG_HZ_48 is not set CONFIG_HZ_100=y @@ -174,35 +168,33 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_PREEMPT_BKL=y # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -215,18 +207,19 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -234,14 +227,11 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -261,16 +251,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # @@ -286,7 +273,6 @@ CONFIG_TRAD_SIGNALS=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set # # Networking @@ -296,7 +282,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -314,7 +299,6 @@ CONFIG_ASK_IP_FIB_HASH=y CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y @@ -342,10 +326,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# CONFIG_IP_VS=m # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12 @@ -380,6 +360,7 @@ CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m @@ -405,8 +386,6 @@ CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set CONFIG_NF_CONNTRACK=m CONFIG_NF_CT_ACCT=y CONFIG_NF_CONNTRACK_MARK=y @@ -414,6 +393,7 @@ CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_GRE=m CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m @@ -432,11 +412,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m # CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m @@ -458,6 +440,7 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # @@ -549,25 +532,13 @@ CONFIG_BRIDGE_EBT_REDIRECT=m CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_LOG=m CONFIG_BRIDGE_EBT_ULOG=m - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_BRIDGE=m @@ -591,9 +562,6 @@ CONFIG_IPDDP_DECAP=y # CONFIG_NET_SCHED=y CONFIG_NET_SCH_FIFO=y -CONFIG_NET_SCH_CLK_JIFFIES=y -# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -# CONFIG_NET_SCH_CLK_CPU is not set # # Queueing/Scheduling @@ -602,6 +570,7 @@ CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RR=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -626,10 +595,16 @@ CONFIG_NET_CLS_U32=m CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=y +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m CONFIG_NET_CLS_POLICE=y CONFIG_NET_CLS_IND=y -CONFIG_NET_ESTIMATOR=y # # Network testing @@ -638,14 +613,26 @@ CONFIG_NET_ESTIMATOR=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=m +# CONFIG_MAC80211_DEBUG is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_IEEE80211_SOFTMAC=m # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y -CONFIG_FIB_RULES=y +CONFIG_RFKILL=m +CONFIG_RFKILL_INPUT=m +# CONFIG_NET_9P is not set # # Device Drivers @@ -658,15 +645,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -710,7 +689,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -737,30 +715,23 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set -# CONFIG_MTD_NAND_CAFE is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support +# UBI - Unsorted block images # +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y # -# Block devices +# UBI debugging options # +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=m # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set @@ -775,21 +746,11 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y @@ -805,6 +766,7 @@ CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes @@ -812,12 +774,12 @@ CONFIG_BLK_DEV_IDECD=y CONFIG_IDE_GENERIC=y CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set +CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set @@ -846,7 +808,6 @@ CONFIG_BLK_DEV_TC86C001=m # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # @@ -854,6 +815,7 @@ CONFIG_IDEDMA_AUTO=y # CONFIG_RAID_ATTRS=m CONFIG_SCSI=m +CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y @@ -876,6 +838,7 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -883,12 +846,8 @@ CONFIG_SCSI_SCAN_ASYNC=y CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_3W_9XXX=m @@ -925,15 +884,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -952,6 +903,8 @@ CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_EMC=m +CONFIG_DM_MULTIPATH_RDAC=m +# CONFIG_DM_DELAY is not set # # Fusion MPT device support @@ -964,30 +917,18 @@ CONFIG_DM_MULTIPATH_EMC=m # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +CONFIG_NETDEVICES_MULTIQUEUE=y +CONFIG_IFB=m CONFIG_DUMMY=m CONFIG_BONDING=m +CONFIG_MACVLAN=m CONFIG_EQUALIZER=m CONFIG_TUN=m - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# CONFIG_PHYLIB=m # @@ -1000,23 +941,17 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set +CONFIG_BROADCOM_PHY=m +CONFIG_ICPLUS_PHY=m # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_AX88796=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y @@ -1026,6 +961,7 @@ CONFIG_PCNET32=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set +CONFIG_TC35815=m # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set @@ -1040,10 +976,7 @@ CONFIG_PCNET32=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set @@ -1054,36 +987,58 @@ CONFIG_PCNET32=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3=m # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_MLX4_CORE is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# +# Wireless LAN +# +CONFIG_WLAN_PRE80211=y +CONFIG_STRIP=m +CONFIG_WLAN_80211=y +CONFIG_IPW2100=m +CONFIG_IPW2100_MONITOR=y +# CONFIG_IPW2100_DEBUG is not set +CONFIG_IPW2200=m +CONFIG_IPW2200_MONITOR=y +CONFIG_IPW2200_RADIOTAP=y +CONFIG_IPW2200_PROMISCUOUS=y +CONFIG_IPW2200_QOS=y +# CONFIG_IPW2200_DEBUG is not set +CONFIG_LIBERTAS=m +# CONFIG_LIBERTAS_DEBUG is not set +CONFIG_HERMES=m +CONFIG_PLX_HERMES=m +CONFIG_TMD_HERMES=m +CONFIG_NORTEL_HERMES=m +CONFIG_PCI_HERMES=m +CONFIG_ATMEL=m +CONFIG_PCI_ATMEL=m +CONFIG_PRISM54=m +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_BCM43XX=m +CONFIG_BCM43XX_DEBUG=y +CONFIG_BCM43XX_DMA=y +CONFIG_BCM43XX_PIO=y +CONFIG_BCM43XX_DMA_AND_PIO_MODE=y +# CONFIG_BCM43XX_DMA_MODE is not set +# CONFIG_BCM43XX_PIO_MODE is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -1094,15 +1049,7 @@ CONFIG_NETXEN_NIC=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -1110,6 +1057,7 @@ CONFIG_NETXEN_NIC=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -1129,6 +1077,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -1171,32 +1120,16 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=m CONFIG_RTC=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -1204,32 +1137,33 @@ CONFIG_RTC=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # @@ -1237,22 +1171,15 @@ CONFIG_RTC=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y @@ -1266,37 +1193,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set # @@ -1313,12 +1212,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +CONFIG_UIO=m +CONFIG_UIO_CIF=m # # File systems @@ -1451,6 +1348,7 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1458,7 +1356,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1531,7 +1428,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1540,12 +1436,13 @@ CONFIG_CMDLINE="" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ABLKCIPHER=m CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y @@ -1564,6 +1461,7 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m @@ -1582,10 +1480,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_HW=y # # Library routines @@ -1593,7 +1488,9 @@ CONFIG_CRYPTO_CAMELLIA=m CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m @@ -1604,3 +1501,4 @@ CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index 239810b6c88..8334350d722 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -1,60 +1,47 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:35 2007 +# Linux kernel version: 2.6.23-rc2 +# Wed Aug 8 15:09:51 2007 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +CONFIG_MACH_VR41XX=y # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -CONFIG_MACH_VR41XX=y +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set # CONFIG_CASIO_E55 is not set # CONFIG_IBM_WORKPAD is not set # CONFIG_NEC_CMBVR4133 is not set @@ -73,6 +60,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y @@ -82,6 +71,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -103,7 +93,6 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_VR41XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y @@ -119,7 +108,6 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -133,48 +121,47 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set +CONFIG_HZ_250=y # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -187,32 +174,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -232,29 +217,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y -# CONFIG_CARDBUS is not set - -# -# PC-card bridges -# -# CONFIG_YENTA is not set -# CONFIG_PD6729 is not set -# CONFIG_I82092 is not set -# CONFIG_PCMCIA_VRC4173 is not set - -# -# PCI Hotplug Support -# +# CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # @@ -267,10 +236,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_PM is not set # # Networking @@ -280,7 +246,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -313,26 +278,17 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +# CONFIG_SCTP_HMAC_MD5 is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -358,14 +314,17 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -378,30 +337,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -412,19 +351,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y @@ -435,20 +364,20 @@ CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -456,16 +385,9 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set # @@ -476,135 +398,38 @@ CONFIG_IDE_GENERIC=y # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# # CONFIG_NET_ETHERNET is not set CONFIG_MII=m - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) +# Wireless LAN # -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support -# -# CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set -CONFIG_HERMES=m -# CONFIG_PLX_HERMES is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_NORTEL_HERMES is not set -# CONFIG_PCI_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_PCMCIA_HERMES=m -# CONFIG_PCMCIA_SPECTRUM is not set -# CONFIG_AIRO_CS is not set -# CONFIG_PCMCIA_WL3501 is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -# CONFIG_USB_ZD1201 is not set -# CONFIG_HOSTAP is not set -# CONFIG_BCM43XX is not set -# CONFIG_ZD1211RW is not set -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -CONFIG_PCMCIA_AXNET=m - -# -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=m +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -614,15 +439,7 @@ CONFIG_PCMCIA_AXNET=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -630,14 +447,12 @@ CONFIG_PCMCIA_AXNET=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set @@ -649,18 +464,14 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # @@ -680,46 +491,25 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # # Non-8250 serial port support # -# CONFIG_SERIAL_VR41XX is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_VR41XX=y +CONFIG_SERIAL_VR41XX_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_DRM is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_GPIO_VR41XX is not set +CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -727,33 +517,33 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # @@ -761,22 +551,13 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB support -# +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y @@ -787,8 +568,8 @@ CONFIG_USB=m # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # @@ -802,6 +583,7 @@ CONFIG_USB_OHCI_HCD=m CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -819,43 +601,9 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=m -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set # @@ -887,6 +635,7 @@ CONFIG_USB_PEGASUS=m # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # @@ -897,38 +646,43 @@ CONFIG_USB_PEGASUS=m # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# LED drivers -# - -# -# LED Triggers +# RTC interfaces # +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# InfiniBand support +# SPI RTC drivers # -# CONFIG_INFINIBAND is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Real Time Clock +# on-CPU RTC drivers # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_DRV_VR41XX=y # # DMA Engine support @@ -944,12 +698,9 @@ CONFIG_USB_PEGASUS=m # # -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -973,7 +724,7 @@ CONFIG_INOTIFY_USER=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y -CONFIG_FUSE_FS=m +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -1005,7 +756,6 @@ CONFIG_CONFIGFS_FS=m # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1029,6 +779,7 @@ CONFIG_NFS_FS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1036,7 +787,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1052,10 +802,7 @@ CONFIG_MSDOS_PARTITION=y # # Distributed Lock Manager # -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set +# CONFIG_DLM is not set # # Profiling support @@ -1073,73 +820,26 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73" # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO is not set # # Library routines # -CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set -CONFIG_CRC16=m -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig index 9913980add2..9383a598094 100644 --- a/arch/mips/configs/rbhma4200_defconfig +++ b/arch/mips/configs/rbhma4200_defconfig @@ -1,58 +1,47 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21 -# Wed May 9 23:44:19 2007 +# Linux kernel version: 2.6.23-rc1 +# Thu Aug 2 22:55:57 2007 # CONFIG_MIPS=y # # Machine selection # -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set CONFIG_TOSHIBA_RBTX4927=y # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set # CONFIG_TOSHIBA_FPCIB0 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set @@ -65,17 +54,20 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_I8259=y +# CONFIG_NO_IOPORT is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_IRQ_TXX9=y CONFIG_SWAP_IO_SPACE=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -114,22 +106,18 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -142,31 +130,24 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # -CONFIG_EXPERIMENTAL=y +# CONFIG_EXPERIMENTAL is not set CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -175,7 +156,6 @@ CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y @@ -187,7 +167,11 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y @@ -195,19 +179,11 @@ CONFIG_SLAB=y # CONFIG_SLOB is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set @@ -273,7 +249,6 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -288,38 +263,17 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing @@ -333,14 +287,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set # # Wireless # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -354,30 +306,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -389,18 +324,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_PHANTOM is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set # CONFIG_IDE is not set # @@ -408,16 +332,9 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set # @@ -428,83 +345,34 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# An alternative FireWire stack is available with EXPERIMENTAL=y # +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NE2000=y # CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # @@ -512,28 +380,13 @@ CONFIG_NE2000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_FDDI is not set -# CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -577,29 +430,14 @@ CONFIG_SERIAL_TXX9_STDSERIAL=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set @@ -608,11 +446,8 @@ CONFIG_DEVPORT=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # @@ -624,11 +459,8 @@ CONFIG_DEVPORT=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support @@ -640,56 +472,17 @@ CONFIG_DEVPORT=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -706,19 +499,18 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_TEST is not set # -# I2C RTC drivers -# - -# # SPI RTC drivers # # # Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_DS1742=y # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -739,24 +531,19 @@ CONFIG_RTC_DRV_DS1742=y # # -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -793,18 +580,11 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -818,7 +598,6 @@ CONFIG_RAMFS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y @@ -826,15 +605,10 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -848,16 +622,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -877,10 +641,6 @@ CONFIG_SYS_SUPPORTS_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # @@ -889,7 +649,9 @@ CONFIG_SYS_SUPPORTS_KGDB=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 40453cd7c70..d1b56cc0fd7 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -1,48 +1,47 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc5 -# Fri Jun 22 21:39:45 2007 +# Linux kernel version: 2.6.23-rc1 +# Thu Aug 2 22:59:53 2007 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_LEMOTE_FULONG is not set # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set CONFIG_TOSHIBA_RBTX4938=y +# CONFIG_WR_PPMC is not set # # Multiplex Pin Select @@ -61,17 +60,16 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_I8259=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_GPIO=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_IRQ_TXX9=y CONFIG_SWAP_IO_SPACE=y CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_HAVE_STD_PC_SERIAL_PORT=y # # CPU selection @@ -114,22 +112,18 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -142,31 +136,24 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # -CONFIG_EXPERIMENTAL=y +# CONFIG_EXPERIMENTAL is not set CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -175,7 +162,6 @@ CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y @@ -199,19 +185,11 @@ CONFIG_SLAB=y # CONFIG_SLOB is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set @@ -277,7 +255,6 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -292,26 +269,17 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing @@ -325,14 +293,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set # # Wireless # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -346,30 +312,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set @@ -381,14 +330,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_PHANTOM is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set +# CONFIG_MISC_DEVICES is not set # CONFIG_IDE is not set # @@ -396,12 +338,9 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set # @@ -412,39 +351,28 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # IEEE 1394 (FireWire) support # -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set # -# I2O device support +# An alternative FireWire stack is available with EXPERIMENTAL=y # +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NE2000=y @@ -461,14 +389,12 @@ CONFIG_TC35815=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -480,22 +406,11 @@ CONFIG_TC35815=y # CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set -# CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -534,24 +449,14 @@ CONFIG_SERIAL_TXX9_STDSERIAL=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set @@ -564,19 +469,15 @@ CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # -# CONFIG_SPI_BITBANG is not set CONFIG_SPI_TXX9=y # # SPI Protocol Masters # CONFIG_SPI_AT25=y -# CONFIG_SPI_SPIDEV is not set - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # @@ -601,56 +502,17 @@ CONFIG_SPI_AT25=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -667,10 +529,6 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y # CONFIG_RTC_DRV_TEST is not set # -# I2C RTC drivers -# - -# # SPI RTC drivers # CONFIG_RTC_DRV_RS5C348=y @@ -681,8 +539,10 @@ CONFIG_RTC_DRV_RS5C348=y # # CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -703,16 +563,19 @@ CONFIG_RTC_DRV_RS5C348=y # # +# Userspace I/O +# +# CONFIG_UIO is not set + +# # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -749,18 +612,11 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -774,7 +630,6 @@ CONFIG_RAMFS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y @@ -782,15 +637,10 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -804,16 +654,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -833,10 +673,6 @@ CONFIG_SYS_SUPPORTS_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # @@ -847,6 +683,7 @@ CONFIG_BITREVERSE=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index e72fdf36b3f..93f9e8331ad 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -655,8 +655,8 @@ CONFIG_MOXA_SMARTIO_NEW=m # CONFIG_SX is not set # CONFIG_RIO is not set # CONFIG_STALDRV is not set -CONFIG_SIBYTE_SB1250_DUART=y -CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y +CONFIG_SERIAL_SB1250_DUART=y +CONFIG_SERIAL_SB1250_DUART_CONSOLE=y # # Serial drivers diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index e9f2cef4c71..326aa7aa40e 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -1,60 +1,47 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc6 -# Sun Apr 15 01:06:01 2007 +# Linux kernel version: 2.6.23-rc2 +# Wed Aug 8 16:11:47 2007 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +CONFIG_MACH_VR41XX=y # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -CONFIG_MACH_VR41XX=y +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set # CONFIG_CASIO_E55 is not set # CONFIG_IBM_WORKPAD is not set # CONFIG_NEC_CMBVR4133 is not set @@ -76,6 +63,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y @@ -85,6 +74,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -106,7 +96,6 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_VR41XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y @@ -122,7 +111,6 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -136,46 +124,44 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set +CONFIG_HZ_250=y # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set @@ -191,32 +177,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -236,16 +220,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # @@ -258,10 +239,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_PM is not set # # Networking @@ -271,14 +249,9 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -288,7 +261,6 @@ CONFIG_ASK_IP_FIB_HASH=y CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y # CONFIG_IP_PNP_DHCP is not set @@ -305,34 +277,25 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +# CONFIG_SCTP_HMAC_MD5 is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -358,10 +321,20 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# # Device Drivers # @@ -372,30 +345,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -412,16 +365,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set # CONFIG_IDE is not set # @@ -429,16 +373,9 @@ CONFIG_SGI_IOC4=m # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set # @@ -449,30 +386,17 @@ CONFIG_SGI_IOC4=m # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y -CONFIG_DUMMY=m +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# CONFIG_PHYLIB=m # @@ -486,29 +410,46 @@ CONFIG_CICADA_PHY=m CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m # CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_TC35815 is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +CONFIG_8139TOO_PIO=y +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +CONFIG_VIA_RHINE=y +CONFIG_VIA_RHINE_MMIO=y +# CONFIG_VIA_RHINE_NAPI is not set +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set @@ -520,35 +461,29 @@ CONFIG_R8169=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set +CONFIG_VIA_VELOCITY=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m +# CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) +# Wireless LAN # -# CONFIG_NET_RADIO is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -558,15 +493,7 @@ CONFIG_NETXEN_NIC=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -574,6 +501,7 @@ CONFIG_NETXEN_NIC=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -590,6 +518,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -624,35 +553,18 @@ CONFIG_SERIAL_VR41XX_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set CONFIG_GPIO_TB0219=y # CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -660,17 +572,9 @@ CONFIG_GPIO_VR41XX=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set # # Multifunction device drivers @@ -681,17 +585,20 @@ CONFIG_GPIO_VR41XX=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # @@ -704,16 +611,8 @@ CONFIG_DUMMY_CONSOLE=y # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB support -# +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y @@ -724,8 +623,8 @@ CONFIG_USB=m # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # @@ -735,7 +634,6 @@ CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set @@ -743,6 +641,7 @@ CONFIG_USB_OHCI_HCD=m CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -760,43 +659,9 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # @@ -840,37 +705,9 @@ CONFIG_USB_MON=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -884,18 +721,29 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# # -# RTC drivers +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_VR41XX=y -# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_VR41XX=y + +# # DMA Engine support # # CONFIG_DMA_ENGINE is not set @@ -909,12 +757,9 @@ CONFIG_RTC_DRV_VR41XX=y # # -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -922,8 +767,14 @@ CONFIG_RTC_DRV_VR41XX=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y @@ -938,7 +789,7 @@ CONFIG_INOTIFY_USER=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y -CONFIG_FUSE_FS=m +# CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y # @@ -965,7 +816,7 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1003,6 +854,7 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1010,7 +862,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1026,10 +877,7 @@ CONFIG_MSDOS_PARTITION=y # # Distributed Lock Manager # -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set +# CONFIG_DLM is not set # # Profiling support @@ -1047,7 +895,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" @@ -1056,63 +903,20 @@ CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index aea67568842..9fd0faeacf5 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -1,68 +1,56 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:41 2007 +# Linux kernel version: 2.6.23-rc2 +# Thu Aug 9 11:16:55 2007 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +CONFIG_MACH_VR41XX=y # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -CONFIG_MACH_VR41XX=y +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set # CONFIG_CASIO_E55 is not set # CONFIG_IBM_WORKPAD is not set # CONFIG_NEC_CMBVR4133 is not set CONFIG_TANBAC_TB022X=y -CONFIG_TANBAC_TB0226=y -# CONFIG_TANBAC_TB0287 is not set # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set +# CONFIG_TANBAC_TB0219 is not set +CONFIG_TANBAC_TB0226=y +# CONFIG_TANBAC_TB0287 is not set CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set @@ -75,6 +63,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y @@ -84,6 +74,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -105,7 +96,6 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_VR41XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y @@ -121,7 +111,6 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -135,48 +124,47 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set +CONFIG_HZ_250=y # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -189,32 +177,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -234,16 +220,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # @@ -256,10 +239,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_PM is not set # # Networking @@ -269,14 +249,9 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -286,7 +261,6 @@ CONFIG_ASK_IP_FIB_HASH=y CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y # CONFIG_IP_PNP_DHCP is not set @@ -302,34 +276,25 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +# CONFIG_SCTP_HMAC_MD5 is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -355,10 +320,20 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# # Device Drivers # @@ -369,30 +344,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# +# CONFIG_CONNECTOR is not set # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -407,19 +362,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set # CONFIG_IDE is not set # @@ -427,6 +372,7 @@ CONFIG_SGI_IOC4=m # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -448,6 +394,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -458,51 +405,8 @@ CONFIG_SCSI_SCAN_ASYNC=y CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_LOWLEVEL is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set # @@ -516,59 +420,26 @@ CONFIG_SCSI_AIC94XX=m # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y @@ -577,6 +448,7 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set +# CONFIG_TC35815 is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y @@ -591,50 +463,25 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) +# Wireless LAN # -# CONFIG_NET_RADIO is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wan interfaces +# USB Network Adapters # +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -645,15 +492,7 @@ CONFIG_NETXEN_NIC=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -661,6 +500,7 @@ CONFIG_NETXEN_NIC=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -677,6 +517,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -711,35 +552,18 @@ CONFIG_SERIAL_VR41XX_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_TANBAC_TB0219 is not set +# CONFIG_GPIO_TB0219 is not set # CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -747,33 +571,33 @@ CONFIG_GPIO_VR41XX=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # @@ -781,22 +605,13 @@ CONFIG_GPIO_VR41XX=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB support -# +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y @@ -807,8 +622,8 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # @@ -818,7 +633,6 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set @@ -826,11 +640,12 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # -# CONFIG_USB_ACM is not set +CONFIG_USB_ACM=y # CONFIG_USB_PRINTER is not set # @@ -854,44 +669,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set # @@ -924,6 +705,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # @@ -934,37 +716,9 @@ CONFIG_USB_STORAGE=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -978,18 +732,29 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# # -# RTC drivers +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_VR41XX=y -# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_VR41XX=y + +# # DMA Engine support # # CONFIG_DMA_ENGINE is not set @@ -1003,12 +768,9 @@ CONFIG_RTC_DRV_VR41XX=y # # -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -1032,7 +794,7 @@ CONFIG_INOTIFY_USER=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y -CONFIG_FUSE_FS=m +# CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y # @@ -1059,7 +821,7 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1097,6 +859,7 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1104,7 +867,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1120,10 +882,7 @@ CONFIG_MSDOS_PARTITION=y # # Distributed Lock Manager # -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set +# CONFIG_DLM is not set # # Profiling support @@ -1141,7 +900,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=32M console=ttyVR0,115200" @@ -1150,62 +908,20 @@ CONFIG_CMDLINE="mem=32M console=ttyVR0,115200" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=m # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC32 is not set -CONFIG_LIBCRC32C=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=m +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 66383ecff20..499b6bd7ee6 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -1,68 +1,56 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc1 -# Thu Feb 22 10:38:09 2007 +# Linux kernel version: 2.6.23-rc2 +# Thu Aug 9 14:03:54 2007 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +CONFIG_MACH_VR41XX=y # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -CONFIG_MACH_VR41XX=y +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set # CONFIG_CASIO_E55 is not set # CONFIG_IBM_WORKPAD is not set # CONFIG_NEC_CMBVR4133 is not set CONFIG_TANBAC_TB022X=y -# CONFIG_TANBAC_TB0226 is not set -CONFIG_TANBAC_TB0287=y # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set +# CONFIG_TANBAC_TB0219 is not set +# CONFIG_TANBAC_TB0226 is not set +CONFIG_TANBAC_TB0287=y CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set @@ -75,6 +63,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y @@ -84,6 +74,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -105,7 +96,6 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_VR41XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y @@ -121,7 +111,6 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -135,86 +124,83 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set +CONFIG_HZ_250=y # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -234,15 +220,14 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # - -# -# PCI Hotplug Support -# +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # # Executable file formats @@ -254,10 +239,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_PM is not set # # Networking @@ -267,14 +249,9 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -284,7 +261,6 @@ CONFIG_ASK_IP_FIB_HASH=y CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y # CONFIG_IP_PNP_DHCP is not set @@ -301,9 +277,9 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y @@ -317,6 +293,8 @@ CONFIG_TCP_CONG_HTCP=m # CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_TCP_CONG_LP is not set # CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set CONFIG_DEFAULT_BIC=y # CONFIG_DEFAULT_CUBIC is not set # CONFIG_DEFAULT_HTCP is not set @@ -324,26 +302,14 @@ CONFIG_DEFAULT_BIC=y # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="bic" -CONFIG_TCP_MD5SIG=y +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -369,10 +335,20 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# # Device Drivers # @@ -381,31 +357,12 @@ CONFIG_FIB_RULES=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -420,19 +377,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set # CONFIG_IDE is not set # @@ -440,6 +387,7 @@ CONFIG_SGI_IOC4=m # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -461,6 +409,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -468,48 +417,8 @@ CONFIG_SCSI_SCAN_ASYNC=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set @@ -532,6 +441,7 @@ CONFIG_ATA=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set @@ -564,10 +474,6 @@ CONFIG_PATA_SIL680=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set # @@ -581,17 +487,16 @@ CONFIG_PATA_SIL680=y # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set CONFIG_IEEE1394=m # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set -CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y -CONFIG_IEEE1394_CONFIG_ROM_IP1394=y # -# Device Drivers +# Controllers # # @@ -600,59 +505,63 @@ CONFIG_IEEE1394_CONFIG_ROM_IP1394=y CONFIG_IEEE1394_OHCI1394=m # -# Protocol Drivers +# Protocols # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m +# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set +CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y -CONFIG_DUMMY=m +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_TC35815 is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +CONFIG_8139TOO_PIO=y +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +CONFIG_VIA_RHINE=y +CONFIG_VIA_RHINE_MMIO=y +# CONFIG_VIA_RHINE_NAPI is not set +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set @@ -664,35 +573,29 @@ CONFIG_R8169=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set +CONFIG_VIA_VELOCITY=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) +# Wireless LAN # -# CONFIG_NET_RADIO is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -703,15 +606,7 @@ CONFIG_NETXEN_NIC=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -719,11 +614,15 @@ CONFIG_NETXEN_NIC=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # -# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set @@ -735,6 +634,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -769,35 +669,18 @@ CONFIG_SERIAL_VR41XX_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_TANBAC_TB0219 is not set +# CONFIG_GPIO_TB0219 is not set # CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -805,17 +688,9 @@ CONFIG_GPIO_VR41XX=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set # # Multifunction device drivers @@ -826,23 +701,31 @@ CONFIG_MFD_SM501=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -850,7 +733,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_TILEBLITTING is not set # -# Frambuffer hardware drivers +# Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set @@ -871,8 +754,10 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_SMIVGX is not set +# CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set @@ -881,27 +766,44 @@ CONFIG_FB_SM501=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE is not set - -# -# Logo configuration -# +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set # CONFIG_LOGO is not set # # Sound # # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set # -# HID Devices +# USB Input Devices # -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set # -# USB support +# USB HID Boot Protocol drivers # +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y @@ -912,8 +814,8 @@ CONFIG_USB=m # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # @@ -923,7 +825,6 @@ CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set @@ -931,6 +832,7 @@ CONFIG_USB_OHCI_HCD=m CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -959,47 +861,10 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # @@ -1032,6 +897,7 @@ CONFIG_USB_MON=y # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # # USB DSL modem support @@ -1041,37 +907,9 @@ CONFIG_USB_MON=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set # @@ -1088,12 +926,9 @@ CONFIG_USB_MON=y # # -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -1111,7 +946,7 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set +CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y CONFIG_XFS_QUOTA=y # CONFIG_XFS_SECURITY is not set @@ -1125,10 +960,11 @@ CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_QUOTACTL=y -# CONFIG_DNOTIFY is not set +CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -1151,10 +987,10 @@ CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1181,12 +1017,18 @@ CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1194,7 +1036,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1210,10 +1051,7 @@ CONFIG_MSDOS_PARTITION=y # # Distributed Lock Manager # -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set +# CONFIG_DLM is not set # # Profiling support @@ -1231,7 +1069,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" @@ -1240,63 +1077,20 @@ CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index db6fd4f1571..b52256ca0b5 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -1,60 +1,47 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:42 2007 +# Linux kernel version: 2.6.23-rc2 +# Thu Aug 9 14:33:57 2007 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +CONFIG_MACH_VR41XX=y # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -CONFIG_MACH_VR41XX=y +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set # CONFIG_CASIO_E55 is not set CONFIG_IBM_WORKPAD=y # CONFIG_NEC_CMBVR4133 is not set @@ -72,6 +59,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y @@ -81,6 +70,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -102,7 +92,6 @@ CONFIG_CPU_VR41XX=y # CONFIG_CPU_SB1 is not set CONFIG_SYS_HAS_CPU_VR41XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y @@ -118,7 +107,6 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y @@ -132,48 +120,47 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set +CONFIG_HZ_250=y # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -186,32 +173,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -229,6 +214,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_ISA=y CONFIG_MMU=y @@ -250,10 +236,6 @@ CONFIG_PCMCIA_PROBE=y CONFIG_PCMCIA_VRC4171=y # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y @@ -263,10 +245,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_PM is not set # # Networking @@ -276,7 +255,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -301,34 +279,25 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +# CONFIG_SCTP_HMAC_MD5 is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -354,8 +323,17 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -368,31 +346,11 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# +# CONFIG_CONNECTOR is not set # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# # CONFIG_PNP is not set -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -400,17 +358,9 @@ CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y @@ -426,15 +376,16 @@ CONFIG_BLK_DEV_IDECS=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_IDE_ARM is not set # CONFIG_IDE_CHIPSETS is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -442,135 +393,38 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y +# CONFIG_NET_ETHERNET is not set CONFIG_MII=m -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_DM9000 is not set -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_ARLAN is not set -# CONFIG_WAVELAN is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y # CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# +# CONFIG_LIBERTAS is not set CONFIG_HERMES=m # CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# CONFIG_PCMCIA_HERMES=m # CONFIG_PCMCIA_SPECTRUM is not set # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_WL3501 is not set # CONFIG_HOSTAP is not set -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m @@ -580,10 +434,6 @@ CONFIG_PCMCIA_NMCLAN=m CONFIG_PCMCIA_SMC91C92=m CONFIG_PCMCIA_XIRC2PS=m CONFIG_PCMCIA_AXNET=m - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -591,15 +441,7 @@ CONFIG_PCMCIA_AXNET=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -607,6 +449,7 @@ CONFIG_PCMCIA_AXNET=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -623,6 +466,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -656,19 +500,10 @@ CONFIG_SERIAL_VR41XX_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -678,17 +513,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set -# CONFIG_GPIO_VR41XX is not set +CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -696,32 +524,33 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # @@ -730,65 +559,51 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_VGA_CONSOLE is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# LED drivers -# - -# -# LED Triggers +# RTC interfaces # +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# InfiniBand support +# SPI RTC drivers # # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Real Time Clock +# on-CPU RTC drivers # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_DRV_VR41XX=y # # DMA Engine support @@ -804,23 +619,25 @@ CONFIG_HID=y # # -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -836,7 +653,7 @@ CONFIG_INOTIFY_USER=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y -CONFIG_FUSE_FS=m +# CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y # @@ -863,7 +680,7 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -885,17 +702,22 @@ CONFIG_CONFIGFS_FS=m # # Network File Systems # -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set # CONFIG_NFSD_TCP is not set -CONFIG_LOCKD=y -CONFIG_EXPORTFS=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -903,7 +725,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -919,10 +740,7 @@ CONFIG_MSDOS_PARTITION=y # # Distributed Lock Manager # -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set +# CONFIG_DLM is not set # # Profiling support @@ -940,7 +758,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M" @@ -949,52 +766,7 @@ CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO is not set # # Library routines @@ -1002,10 +774,11 @@ CONFIG_CRYPTO_CAMELLIA=m CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/defconfig b/arch/mips/defconfig index d3d81fb2765..670039bb1a7 100644 --- a/arch/mips/defconfig +++ b/arch/mips/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:14 2007 +# Linux kernel version: 2.6.23-rc2 +# Tue Aug 7 12:39:49 2007 # CONFIG_MIPS=y @@ -9,52 +9,40 @@ CONFIG_MIPS=y # Machine selection # CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set CONFIG_SGI_IP22=y # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -67,6 +55,9 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARC=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set @@ -82,6 +73,7 @@ CONFIG_ARC_PROMLIB=y # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -122,8 +114,6 @@ CONFIG_IP22_CPU_SCACHE=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -139,6 +129,8 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -152,35 +144,33 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -193,32 +183,30 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -237,6 +225,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_EISA=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_EISA is not set CONFIG_MMU=y @@ -245,10 +234,6 @@ CONFIG_MMU=y # # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y @@ -261,7 +246,7 @@ CONFIG_TRAD_SIGNALS=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_SUSPEND is not set # # Networking @@ -271,7 +256,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -308,10 +292,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# CONFIG_IP_VS=m # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12 @@ -346,10 +326,11 @@ CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=y +CONFIG_IPV6_MIP6=m CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m @@ -371,8 +352,6 @@ CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set CONFIG_NF_CONNTRACK=m CONFIG_NF_CT_ACCT=y CONFIG_NF_CONNTRACK_MARK=y @@ -380,6 +359,7 @@ CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y CONFIG_NF_CT_PROTO_GRE=m CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m @@ -398,11 +378,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m @@ -423,6 +405,7 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # @@ -490,25 +473,13 @@ CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -527,9 +498,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_NET_SCHED=y CONFIG_NET_SCH_FIFO=y -# CONFIG_NET_SCH_CLK_JIFFIES is not set -CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y -# CONFIG_NET_SCH_CLK_CPU is not set # # Queueing/Scheduling @@ -538,6 +506,7 @@ CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RR=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -562,10 +531,16 @@ CONFIG_NET_CLS_U32=m CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=y +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m CONFIG_NET_CLS_POLICE=y # CONFIG_NET_CLS_IND is not set -CONFIG_NET_ESTIMATOR=y # # Network testing @@ -574,14 +549,26 @@ CONFIG_NET_ESTIMATOR=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=m +# CONFIG_MAC80211_DEBUG is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_IEEE80211_SOFTMAC=m # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y -CONFIG_FIB_RULES=y +CONFIG_RFKILL=m +CONFIG_RFKILL_INPUT=m +# CONFIG_NET_9P is not set # # Device Drivers @@ -593,47 +580,19 @@ CONFIG_FIB_RULES=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set # CONFIG_IDE is not set # @@ -641,6 +600,7 @@ CONFIG_ATA_OVER_ETH=m # CONFIG_RAID_ATTRS=m CONFIG_SCSI=y +CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=m # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -663,6 +623,7 @@ CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -670,51 +631,21 @@ CONFIG_SCSI_SCAN_ASYNC=y CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_SGIWD93_SCSI=y # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_IFB is not set CONFIG_DUMMY=m CONFIG_BONDING=m +CONFIG_MACVLAN=m CONFIG_EQUALIZER=m CONFIG_TUN=m - -# -# PHY device support -# CONFIG_PHYLIB=m # @@ -728,36 +659,25 @@ CONFIG_CICADA_PHY=m # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_AX88796 is not set # CONFIG_DM9000 is not set CONFIG_SGISEEQ=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +CONFIG_WLAN_PRE80211=y +CONFIG_STRIP=m +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +CONFIG_HOSTAP=m +# CONFIG_HOSTAP_FIRMWARE is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -765,15 +685,7 @@ CONFIG_SGISEEQ=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -781,6 +693,7 @@ CONFIG_SGISEEQ=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -806,9 +719,16 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2_ALPS is not set +CONFIG_MOUSE_PS2_LOGIPS2PP=y +# CONFIG_MOUSE_PS2_SYNAPTICS is not set +# CONFIG_MOUSE_PS2_LIFEBOOK is not set +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -844,15 +764,7 @@ CONFIG_SERIAL_CORE=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -864,20 +776,10 @@ CONFIG_INDYDOG=m # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set CONFIG_SGI_DS1286=m -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=256 - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -885,32 +787,33 @@ CONFIG_MAX_RAW_DEVS=256 # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # @@ -920,31 +823,20 @@ CONFIG_FIRMWARE_EDID=y CONFIG_SGI_NEWPORT_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_SGI_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set @@ -957,36 +849,8 @@ CONFIG_HID=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set # @@ -1003,12 +867,9 @@ CONFIG_HID=y # # -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -1121,6 +982,7 @@ CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1136,7 +998,6 @@ CONFIG_CIFS=m CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1158,6 +1019,7 @@ CONFIG_SGI_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -1207,8 +1069,6 @@ CONFIG_NLS_UTF8=m # Distributed Lock Manager # CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set # CONFIG_DLM_DEBUG is not set # @@ -1227,7 +1087,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1237,12 +1096,9 @@ CONFIG_CMDLINE="" CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ABLKCIPHER=m CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y @@ -1261,6 +1117,7 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m @@ -1279,10 +1136,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO_HW is not set # # Library routines @@ -1290,7 +1144,9 @@ CONFIG_CRYPTO_CAMELLIA=m CONFIG_BITREVERSE=m # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=m +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m @@ -1301,3 +1157,4 @@ CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c index 1187b44a3dd..d9efe692e55 100644 --- a/arch/mips/jmr3927/rbhma3100/irq.c +++ b/arch/mips/jmr3927/rbhma3100/irq.c @@ -45,9 +45,6 @@ #error JMR3927_IRQ_END > NR_IRQS #endif -#define irc_dlevel 0 -#define irc_elevel 1 - static unsigned char irc_level[TX3927_NUM_IR] = { 5, 5, 5, 5, 5, 5, /* INT[5:0] */ 7, 7, /* SIO */ @@ -80,34 +77,6 @@ static void unmask_irq_ioc(unsigned int irq) (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR); } -static void mask_irq_irc(unsigned int irq) -{ - unsigned int irq_nr = irq - JMR3927_IRQ_IRC; - volatile unsigned long *ilrp = &tx3927_ircptr->ilr[irq_nr / 2]; - if (irq_nr & 1) - *ilrp = (*ilrp & 0x00ff) | (irc_dlevel << 8); - else - *ilrp = (*ilrp & 0xff00) | irc_dlevel; - /* update IRCSR */ - tx3927_ircptr->imr = 0; - tx3927_ircptr->imr = irc_elevel; - /* flush write buffer */ - (void)tx3927_ircptr->ssr; -} - -static void unmask_irq_irc(unsigned int irq) -{ - unsigned int irq_nr = irq - JMR3927_IRQ_IRC; - volatile unsigned long *ilrp = &tx3927_ircptr->ilr[irq_nr / 2]; - if (irq_nr & 1) - *ilrp = (*ilrp & 0x00ff) | (irc_level[irq_nr] << 8); - else - *ilrp = (*ilrp & 0xff00) | irc_level[irq_nr]; - /* update IRCSR */ - tx3927_ircptr->imr = 0; - tx3927_ircptr->imr = irc_elevel; -} - asmlinkage void plat_irq_dispatch(void) { unsigned long cp0_cause = read_c0_cause(); @@ -168,10 +137,6 @@ void __init arch_init_irq(void) /* clear PCI Reset interrupts */ jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); - /* enable interrupt control */ - tx3927_ircptr->cer = TX3927_IRCER_ICE; - tx3927_ircptr->imr = irc_elevel; - jmr3927_irq_init(); /* setup IOC interrupt 1 (PCI, MODEM) */ @@ -193,20 +158,13 @@ static struct irq_chip jmr3927_irq_ioc = { .unmask = unmask_irq_ioc, }; -static struct irq_chip jmr3927_irq_irc = { - .name = "jmr3927_irc", - .ack = mask_irq_irc, - .mask = mask_irq_irc, - .mask_ack = mask_irq_irc, - .unmask = unmask_irq_irc, -}; - static void __init jmr3927_irq_init(void) { u32 i; - for (i = JMR3927_IRQ_IRC; i < JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC; i++) - set_irq_chip_and_handler(i, &jmr3927_irq_irc, handle_level_irq); + txx9_irq_init(TX3927_IRC_REG); + for (i = 0; i < TXx9_MAX_IR; i++) + txx9_irq_set_pri(i, irc_level[i]); for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++) set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq); } diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c index 8303001516d..fde56e86c2a 100644 --- a/arch/mips/jmr3927/rbhma3100/setup.c +++ b/arch/mips/jmr3927/rbhma3100/setup.c @@ -290,19 +290,6 @@ static void __init tx3927_setup(void) tx3927_ccfgptr->crir, tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg); - /* IRC */ - /* disable interrupt control */ - tx3927_ircptr->cer = 0; - /* mask all IRC interrupts */ - tx3927_ircptr->imr = 0; - for (i = 0; i < TX3927_NUM_IR / 2; i++) { - tx3927_ircptr->ilr[i] = 0; - } - /* setup IRC interrupt mode (Low Active) */ - for (i = 0; i < TX3927_NUM_IR / 8; i++) { - tx3927_ircptr->cr[i] = 0; - } - /* TMR */ /* disable all timers */ for (i = 0; i < TX3927_NR_TMR; i++) { diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 07344cb3759..2fd96d95a39 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_IRQ_CPU) += irq_cpu.o obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o obj-$(CONFIG_IRQ_CPU_RM9K) += irq-rm9000.o obj-$(CONFIG_MIPS_BOARDS_GEN) += irq-msc01.o +obj-$(CONFIG_IRQ_TXX9) += irq_txx9.o obj-$(CONFIG_32BIT) += scall32-o32.o obj-$(CONFIG_64BIT) += scall64-64.o diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c index 013327286c2..ca136298acd 100644 --- a/arch/mips/kernel/asm-offsets.c +++ b/arch/mips/kernel/asm-offsets.c @@ -232,6 +232,10 @@ void output_mm_defines(void) constant("#define _PMD_T_LOG2 ", PMD_T_LOG2); constant("#define _PTE_T_LOG2 ", PTE_T_LOG2); linefeed; + constant("#define _PGD_ORDER ", PGD_ORDER); + constant("#define _PMD_ORDER ", PMD_ORDER); + constant("#define _PTE_ORDER ", PTE_ORDER); + linefeed; constant("#define _PMD_SHIFT ", PMD_SHIFT); constant("#define _PGDIR_SHIFT ", PGDIR_SHIFT); linefeed; diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c index c09337b947b..ac04f0adc40 100644 --- a/arch/mips/kernel/cpu-bugs64.c +++ b/arch/mips/kernel/cpu-bugs64.c @@ -29,7 +29,7 @@ static inline void align_mod(const int align, const int mod) ".endr\n\t" ".set pop" : - : "n" (align), "n" (mod)); + : "rn" (align), "rn" (mod)); } static inline void mult_sh_align_mod(long *v1, long *v2, long *w, diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c index 6980deb6dce..28b2a8f0091 100644 --- a/arch/mips/kernel/irixsig.c +++ b/arch/mips/kernel/irixsig.c @@ -725,7 +725,7 @@ asmlinkage int irix_getcontext(struct pt_regs *regs) current->comm, current->pid, ctx); #endif - if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx))); + if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx))) return -EFAULT; error = __put_user(current->thread.irix_oldctx, &ctx->link); diff --git a/arch/mips/kernel/irq_txx9.c b/arch/mips/kernel/irq_txx9.c new file mode 100644 index 00000000000..a4d1462c27f --- /dev/null +++ b/arch/mips/kernel/irq_txx9.c @@ -0,0 +1,192 @@ +/* + * linux/arch/mips/kernel/irq_txx9.c + * + * Based on linux/arch/mips/jmr3927/rbhma3100/irq.c, + * linux/arch/mips/tx4927/common/tx4927_irq.c, + * linux/arch/mips/tx4938/common/irq.c + * + * Copyright 2001, 2003-2005 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ahennessy@mvista.com + * source@mvista.com + * Copyright (C) 2000-2001 Toshiba Corporation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/types.h> +#include <asm/txx9irq.h> + +struct txx9_irc_reg { + u32 cer; + u32 cr[2]; + u32 unused0; + u32 ilr[8]; + u32 unused1[4]; + u32 imr; + u32 unused2[7]; + u32 scr; + u32 unused3[7]; + u32 ssr; + u32 unused4[7]; + u32 csr; +}; + +/* IRCER : Int. Control Enable */ +#define TXx9_IRCER_ICE 0x00000001 + +/* IRCR : Int. Control */ +#define TXx9_IRCR_LOW 0x00000000 +#define TXx9_IRCR_HIGH 0x00000001 +#define TXx9_IRCR_DOWN 0x00000002 +#define TXx9_IRCR_UP 0x00000003 +#define TXx9_IRCR_EDGE(cr) ((cr) & 0x00000002) + +/* IRSCR : Int. Status Control */ +#define TXx9_IRSCR_EIClrE 0x00000100 +#define TXx9_IRSCR_EIClr_MASK 0x0000000f + +/* IRCSR : Int. Current Status */ +#define TXx9_IRCSR_IF 0x00010000 +#define TXx9_IRCSR_ILV_MASK 0x00000700 +#define TXx9_IRCSR_IVL_MASK 0x0000001f + +#define irc_dlevel 0 +#define irc_elevel 1 + +static struct txx9_irc_reg __iomem *txx9_ircptr __read_mostly; + +static struct { + unsigned char level; + unsigned char mode; +} txx9irq[TXx9_MAX_IR] __read_mostly; + +static void txx9_irq_unmask(unsigned int irq) +{ + unsigned int irq_nr = irq - TXX9_IRQ_BASE; + u32 __iomem *ilrp = &txx9_ircptr->ilr[(irq_nr % 16 ) / 2]; + int ofs = irq_nr / 16 * 16 + (irq_nr & 1) * 8; + + __raw_writel((__raw_readl(ilrp) & ~(0xff << ofs)) + | (txx9irq[irq_nr].level << ofs), + ilrp); +#ifdef CONFIG_CPU_TX39XX + /* update IRCSR */ + __raw_writel(0, &txx9_ircptr->imr); + __raw_writel(irc_elevel, &txx9_ircptr->imr); +#endif +} + +static inline void txx9_irq_mask(unsigned int irq) +{ + unsigned int irq_nr = irq - TXX9_IRQ_BASE; + u32 __iomem *ilrp = &txx9_ircptr->ilr[(irq_nr % 16) / 2]; + int ofs = irq_nr / 16 * 16 + (irq_nr & 1) * 8; + + __raw_writel((__raw_readl(ilrp) & ~(0xff << ofs)) + | (irc_dlevel << ofs), + ilrp); +#ifdef CONFIG_CPU_TX39XX + /* update IRCSR */ + __raw_writel(0, &txx9_ircptr->imr); + __raw_writel(irc_elevel, &txx9_ircptr->imr); + /* flush write buffer */ + __raw_readl(&txx9_ircptr->ssr); +#else + mmiowb(); +#endif +} + +static void txx9_irq_mask_ack(unsigned int irq) +{ + unsigned int irq_nr = irq - TXX9_IRQ_BASE; + + txx9_irq_mask(irq); + /* clear edge detection */ + if (unlikely(TXx9_IRCR_EDGE(txx9irq[irq_nr].mode))) + __raw_writel(TXx9_IRSCR_EIClrE | irq_nr, &txx9_ircptr->scr); +} + +static int txx9_irq_set_type(unsigned int irq, unsigned int flow_type) +{ + unsigned int irq_nr = irq - TXX9_IRQ_BASE; + u32 cr; + u32 __iomem *crp; + int ofs; + int mode; + + if (flow_type & IRQF_TRIGGER_PROBE) + return 0; + switch (flow_type & IRQF_TRIGGER_MASK) { + case IRQF_TRIGGER_RISING: mode = TXx9_IRCR_UP; break; + case IRQF_TRIGGER_FALLING: mode = TXx9_IRCR_DOWN; break; + case IRQF_TRIGGER_HIGH: mode = TXx9_IRCR_HIGH; break; + case IRQF_TRIGGER_LOW: mode = TXx9_IRCR_LOW; break; + default: + return -EINVAL; + } + crp = &txx9_ircptr->cr[(unsigned int)irq_nr / 8]; + cr = __raw_readl(crp); + ofs = (irq_nr & (8 - 1)) * 2; + cr &= ~(0x3 << ofs); + cr |= (mode & 0x3) << ofs; + __raw_writel(cr, crp); + txx9irq[irq_nr].mode = mode; + return 0; +} + +static struct irq_chip txx9_irq_chip = { + .name = "TXX9", + .ack = txx9_irq_mask_ack, + .mask = txx9_irq_mask, + .mask_ack = txx9_irq_mask_ack, + .unmask = txx9_irq_unmask, + .set_type = txx9_irq_set_type, +}; + +void __init txx9_irq_init(unsigned long baseaddr) +{ + int i; + + txx9_ircptr = ioremap(baseaddr, sizeof(struct txx9_irc_reg)); + for (i = 0; i < TXx9_MAX_IR; i++) { + txx9irq[i].level = 4; /* middle level */ + txx9irq[i].mode = TXx9_IRCR_LOW; + set_irq_chip_and_handler(TXX9_IRQ_BASE + i, + &txx9_irq_chip, handle_level_irq); + } + + /* mask all IRC interrupts */ + __raw_writel(0, &txx9_ircptr->imr); + for (i = 0; i < 8; i++) + __raw_writel(0, &txx9_ircptr->ilr[i]); + /* setup IRC interrupt mode (Low Active) */ + for (i = 0; i < 2; i++) + __raw_writel(0, &txx9_ircptr->cr[i]); + /* enable interrupt control */ + __raw_writel(TXx9_IRCER_ICE, &txx9_ircptr->cer); + __raw_writel(irc_elevel, &txx9_ircptr->imr); +} + +int __init txx9_irq_set_pri(int irc_irq, int new_pri) +{ + int old_pri; + + if ((unsigned int)irc_irq >= TXx9_MAX_IR) + return 0; + old_pri = txx9irq[irc_irq].level; + txx9irq[irc_irq].level = new_pri; + return old_pri; +} + +int txx9_irq(void) +{ + u32 csr = __raw_readl(&txx9_ircptr->csr); + + if (likely(!(csr & TXx9_IRCSR_IF))) + return TXX9_IRQ_BASE + (csr & (TXx9_MAX_IR - 1)); + return -1; +} diff --git a/arch/mips/kernel/machine_kexec.c b/arch/mips/kernel/machine_kexec.c index 22960d67cf0..85beb9b0b2d 100644 --- a/arch/mips/kernel/machine_kexec.c +++ b/arch/mips/kernel/machine_kexec.c @@ -78,11 +78,8 @@ machine_kexec(struct kimage *image) */ local_irq_disable(); - flush_icache_range(reboot_code_buffer, - reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE); - printk("Will call new kernel at %08lx\n", image->start); printk("Bye ...\n"); - flush_cache_all(); + __flush_cache_all(); ((noretfun_t) reboot_code_buffer)(); } diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c index 7169a4db37b..56750b02ab4 100644 --- a/arch/mips/kernel/mips-mt.c +++ b/arch/mips/kernel/mips-mt.c @@ -4,6 +4,7 @@ */ #include <linux/device.h> +#include <linux/kallsyms.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/module.h> @@ -84,8 +85,9 @@ void mips_mt_regdump(unsigned long mvpctl) read_vpe_c0_vpeconf0()); printk(" VPE%d.Status : %08lx\n", i, read_vpe_c0_status()); - printk(" VPE%d.EPC : %08lx\n", + printk(" VPE%d.EPC : %08lx ", i, read_vpe_c0_epc()); + print_symbol("%s\n", read_vpe_c0_epc()); printk(" VPE%d.Cause : %08lx\n", i, read_vpe_c0_cause()); printk(" VPE%d.Config7 : %08lx\n", @@ -110,7 +112,8 @@ void mips_mt_regdump(unsigned long mvpctl) } printk(" TCStatus : %08lx\n", tcstatval); printk(" TCBind : %08lx\n", read_tc_c0_tcbind()); - printk(" TCRestart : %08lx\n", read_tc_c0_tcrestart()); + printk(" TCRestart : %08lx ", read_tc_c0_tcrestart()); + print_symbol("%s\n", read_tc_c0_tcrestart()); printk(" TCHalt : %08lx\n", haltval); printk(" TCContext : %08lx\n", read_tc_c0_tccontext()); if (!haltval) diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index 19b30d6f172..05dcce41632 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -287,7 +287,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus) * (unsigned long)idle->thread_info the gp * assumes a 1:1 mapping of TC => VPE */ -void prom_boot_secondary(int cpu, struct task_struct *idle) +void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) { struct thread_info *gp = task_thread_info(idle); dvpe(); @@ -321,7 +321,7 @@ void prom_boot_secondary(int cpu, struct task_struct *idle) evpe(EVPE_ENABLE); } -void prom_init_secondary(void) +void __cpuinit prom_init_secondary(void) { /* Enable per-cpu interrupts */ @@ -330,7 +330,7 @@ void prom_init_secondary(void) (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7)); } -void prom_smp_finish(void) +void __cpuinit prom_smp_finish(void) { write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ)); diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 16aa5d37117..43826c16101 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -28,8 +28,6 @@ * This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set. */ -#define MIPS_CPU_IPI_IRQ 1 - #define LOCK_MT_PRA() \ local_irq_save(flags); \ mtflags = dmt() diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index c8e291c8305..6379003f9d8 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -606,6 +606,8 @@ asmlinkage void do_ov(struct pt_regs *regs) */ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) { + siginfo_t info; + die_if_kernel("FP exception in kernel code", regs); if (fcr31 & FPU_CSR_UNI_X) { @@ -641,9 +643,22 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) force_sig(sig, current); return; - } - - force_sig(SIGFPE, current); + } else if (fcr31 & FPU_CSR_INV_X) + info.si_code = FPE_FLTINV; + else if (fcr31 & FPU_CSR_DIV_X) + info.si_code = FPE_FLTDIV; + else if (fcr31 & FPU_CSR_OVF_X) + info.si_code = FPE_FLTOVF; + else if (fcr31 & FPU_CSR_UDF_X) + info.si_code = FPE_FLTUND; + else if (fcr31 & FPU_CSR_INE_X) + info.si_code = FPE_FLTRES; + else + info.si_code = __SI_FAULT; + info.si_signo = SIGFPE; + info.si_errno = 0; + info.si_addr = (void __user *) regs->cp0_epc; + force_sig_info(SIGFPE, &info, current); } asmlinkage void do_bp(struct pt_regs *regs) @@ -1035,19 +1050,11 @@ void ejtag_exception_handler(struct pt_regs *regs) /* * NMI exception handler. */ -void nmi_exception_handler(struct pt_regs *regs) +NORET_TYPE void ATTRIB_NORET nmi_exception_handler(struct pt_regs *regs) { -#ifdef CONFIG_MIPS_MT_SMTC - unsigned long dvpret = dvpe(); - bust_spinlocks(1); - printk("NMI taken!!!!\n"); - mips_mt_regdump(dvpret); -#else bust_spinlocks(1); printk("NMI taken!!!!\n"); -#endif /* CONFIG_MIPS_MT_SMTC */ die("NMI", regs); - while(1) ; } #define VECTORSPACING 0x100 /* for EI/VI mode */ diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index bc9bae2a73f..60bbaecde18 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -142,15 +142,16 @@ SECTIONS *(.exitcall.exit) /* ABI crap starts here */ - *(.comment) *(.MIPS.options) - *(.note) *(.options) *(.pdr) *(.reginfo) - *(.mdebug*) } + /* These mark the ABI of the kernel for debuggers. */ + .mdebug.abi32 : { KEEP(*(.mdebug.abi32)) } + .mdebug.abi64 : { KEEP(*(.mdebug.abi64)) } + /* This is the MIPS specific mdebug section. */ .mdebug : { *(.mdebug) } diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 91ed1eb3310..8810dfb915d 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -28,4 +28,4 @@ obj-$(CONFIG_CPU_TX49XX) += dump_tlb.o obj-$(CONFIG_CPU_VR41XX) += dump_tlb.o # libgcc-style stuff needed in the kernel -obj-y += ashldi3.o ashrdi3.o lshrdi3.o ucmpdi2.o +obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o diff --git a/arch/mips/lib/cmpdi2.c b/arch/mips/lib/cmpdi2.c new file mode 100644 index 00000000000..8c1306437ed --- /dev/null +++ b/arch/mips/lib/cmpdi2.c @@ -0,0 +1,27 @@ +#include <linux/module.h> + +#include "libgcc.h" + +word_type __cmpdi2(long long a, long long b) +{ + const DWunion au = { + .ll = a + }; + const DWunion bu = { + .ll = b + }; + + if (au.s.high < bu.s.high) + return 0; + else if (au.s.high > bu.s.high) + return 2; + + if ((unsigned int) au.s.low < (unsigned int) bu.s.low) + return 0; + else if ((unsigned int) au.s.low > (unsigned int) bu.s.low) + return 2; + + return 1; +} + +EXPORT_SYMBOL(__cmpdi2); diff --git a/arch/mips/mips-boards/malta/malta_smtc.c b/arch/mips/mips-boards/malta/malta_smtc.c index 0fb4c269901..ae05d058cb3 100644 --- a/arch/mips/mips-boards/malta/malta_smtc.c +++ b/arch/mips/mips-boards/malta/malta_smtc.c @@ -1,6 +1,7 @@ /* * Malta Platform-specific hooks for SMP operation */ +#include <linux/irq.h> #include <linux/init.h> #include <asm/mipsregs.h> @@ -24,7 +25,7 @@ void core_send_ipi(int cpu, unsigned int action) * Platform "CPU" startup hook */ -void prom_boot_secondary(int cpu, struct task_struct *idle) +void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) { smtc_boot_secondary(cpu, idle); } @@ -33,7 +34,7 @@ void prom_boot_secondary(int cpu, struct task_struct *idle) * Post-config but pre-boot cleanup entry point */ -void prom_init_secondary(void) +void __cpuinit prom_init_secondary(void) { void smtc_init_secondary(void); int myvpe; @@ -42,10 +43,11 @@ void prom_init_secondary(void) myvpe = read_c0_tcbind() & TCBIND_CURVPE; if (myvpe != 0) { /* Ideally, this should be done only once per VPE, but... */ - clear_c0_status(STATUSF_IP2); - set_c0_status(STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP3 - | STATUSF_IP4 | STATUSF_IP5 | STATUSF_IP6 - | STATUSF_IP7); + clear_c0_status(ST0_IM); + set_c0_status((0x100 << cp0_compare_irq) + | (0x100 << MIPS_CPU_IPI_IRQ)); + if (cp0_perfcount_irq >= 0) + set_c0_status(0x100 << cp0_perfcount_irq); } smtc_init_secondary(); @@ -74,7 +76,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus) * SMP initialization finalization entry point */ -void prom_smp_finish(void) +void __cpuinit prom_smp_finish(void) { smtc_smp_finish(); } diff --git a/arch/mips/mips-boards/sim/sim_int.c b/arch/mips/mips-boards/sim/sim_int.c deleted file mode 100644 index 766e0159ee5..00000000000 --- a/arch/mips/mips-boards/sim/sim_int.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Copyright (C) 1999, 2005 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> -#include <asm/mips-boards/simint.h> -#include <asm/irq_cpu.h> - -static inline int clz(unsigned long x) -{ - __asm__ ( - " .set push \n" - " .set mips32 \n" - " clz %0, %1 \n" - " .set pop \n" - : "=r" (x) - : "r" (x)); - - return x; -} - -/* - * Version of ffs that only looks at bits 12..15. - */ -static inline unsigned int irq_ffs(unsigned int pending) -{ -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - return -clz(pending) + 31 - CAUSEB_IP; -#else - unsigned int a0 = 7; - unsigned int t0; - - t0 = s0 & 0xf000; - t0 = t0 < 1; - t0 = t0 << 2; - a0 = a0 - t0; - s0 = s0 << t0; - - t0 = s0 & 0xc000; - t0 = t0 < 1; - t0 = t0 << 1; - a0 = a0 - t0; - s0 = s0 << t0; - - t0 = s0 & 0x8000; - t0 = t0 < 1; - //t0 = t0 << 2; - a0 = a0 - t0; - //s0 = s0 << t0; - - return a0; -#endif -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; - int irq; - - irq = irq_ffs(pending); - - if (irq > 0) - do_IRQ(MIPS_CPU_IRQ_BASE + irq); - else - spurious_interrupt(); -} - -void __init arch_init_irq(void) -{ - mips_cpu_irq_init(); -} diff --git a/arch/mips/mipssim/sim_smp.c b/arch/mips/mipssim/sim_smp.c index 38fa807b99f..ccbbccac23e 100644 --- a/arch/mips/mipssim/sim_smp.c +++ b/arch/mips/mipssim/sim_smp.c @@ -53,7 +53,7 @@ void core_send_ipi(int cpu, unsigned int action) * Platform "CPU" startup hook */ -void prom_boot_secondary(int cpu, struct task_struct *idle) +void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) { #ifdef CONFIG_MIPS_MT_SMTC smtc_boot_secondary(cpu, idle); @@ -64,7 +64,7 @@ void prom_boot_secondary(int cpu, struct task_struct *idle) * Post-config but pre-boot cleanup entry point */ -void prom_init_secondary(void) +void __cpuinit prom_init_secondary(void) { #ifdef CONFIG_MIPS_MT_SMTC void smtc_init_secondary(void); @@ -103,7 +103,7 @@ void plat_prepare_cpus(unsigned int max_cpus) * SMP initialization finalization entry point */ -void prom_smp_finish(void) +void __cpuinit prom_smp_finish(void) { #ifdef CONFIG_MIPS_MT_SMTC smtc_smp_finish(); diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index b8cb0dde3af..09d91505b90 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -26,6 +26,7 @@ #include <linux/proc_fs.h> #include <linux/pfn.h> +#include <asm/asm-offsets.h> #include <asm/bootinfo.h> #include <asm/cachectl.h> #include <asm/cpu.h> @@ -498,7 +499,13 @@ unsigned long pgd_current[NR_CPUS]; * different layout ... */ #define __page_aligned(order) __attribute__((__aligned__(PAGE_SIZE<<order))) -pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned(PGD_ORDER); + +/* + * gcc 3.3 and older have trouble determining that PTRS_PER_PGD and PGD_ORDER + * are constants. So we use the variants from asm-offset.h until that gcc + * will officially be retired. + */ +pgd_t swapper_pg_dir[_PTRS_PER_PGD] __page_aligned(_PGD_ORDER); #ifdef CONFIG_64BIT #ifdef MODULE_START pgd_t module_pg_dir[PTRS_PER_PGD] __page_aligned(PGD_ORDER); diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 99d8f4fd3ff..6c5c684d142 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -75,7 +75,7 @@ pcibios_align_resource(void *data, struct resource *res, res->start = start; } -void __init register_pci_controller(struct pci_controller *hose) +void __devinit register_pci_controller(struct pci_controller *hose) { if (request_resource(&iomem_resource, hose->mem_resource) < 0) goto out; @@ -230,7 +230,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return pcibios_plat_dev_init(dev); } -static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev, +static void pcibios_fixup_device_resources(struct pci_dev *dev, struct pci_bus *bus) { /* Update device resources. */ @@ -251,7 +251,7 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev, } } -void __devinit pcibios_fixup_bus(struct pci_bus *bus) +void pcibios_fixup_bus(struct pci_bus *bus) { /* Propagate hose info into the subordinate devices. */ @@ -282,8 +282,7 @@ pcibios_update_irq(struct pci_dev *dev, int irq) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); } -void __devinit -pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, struct resource *res) { struct pci_controller *hose = (struct pci_controller *)dev->sysdata; diff --git a/arch/mips/philips/pnx8550/common/Kconfig b/arch/mips/philips/pnx8550/common/Kconfig deleted file mode 100644 index 072572d173c..00000000000 --- a/arch/mips/philips/pnx8550/common/Kconfig +++ /dev/null @@ -1 +0,0 @@ -# Place holder diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c index 1c852d6a765..b0f12cd2968 100644 --- a/arch/mips/pmc-sierra/yosemite/smp.c +++ b/arch/mips/pmc-sierra/yosemite/smp.c @@ -77,7 +77,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus) * stack so the first thing we do is throw away that stuff and load useful * values into the registers ... */ -void __init prom_boot_secondary(int cpu, struct task_struct *idle) +void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) { unsigned long gp = (unsigned long) task_thread_info(idle); unsigned long sp = __KSTK_TOS(idle); @@ -97,12 +97,12 @@ void prom_cpus_done(void) * After we've done initial boot, this function is called to allow the * board code to clean up state, if needed */ -void prom_init_secondary(void) +void __cpuinit prom_init_secondary(void) { set_c0_status(ST0_CO | ST0_IE | ST0_IM); } -void prom_smp_finish(void) +void __cpuinit prom_smp_finish(void) { } diff --git a/arch/mips/qemu/q-smp.c b/arch/mips/qemu/q-smp.c index 786bbfa214d..4b0178d0df0 100644 --- a/arch/mips/qemu/q-smp.c +++ b/arch/mips/qemu/q-smp.c @@ -22,11 +22,11 @@ void core_send_ipi(int cpu, unsigned int action) * After we've done initial boot, this function is called to allow the * board code to clean up state, if needed */ -void prom_init_secondary(void) +void __cpuinit prom_init_secondary(void) { } -void prom_smp_finish(void) +void __cpuinit prom_smp_finish(void) { } @@ -43,7 +43,7 @@ void __init prom_prepare_cpus(unsigned int max_cpus) /* * Firmware CPU startup hook */ -void prom_boot_secondary(int cpu, struct task_struct *idle) +void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) { } diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c index ddb6506d834..01a805dcc67 100644 --- a/arch/mips/sgi-ip22/ip22-mc.c +++ b/arch/mips/sgi-ip22/ip22-mc.c @@ -47,7 +47,7 @@ struct mem { /* * Detect installed memory, do some sanity checks and notify kernel about it */ -static void probe_memory(void) +static void __init probe_memory(void) { int i, j, found, cnt = 0; struct mem bank[4]; diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c index 25097ecc9ba..e7ce7982db7 100644 --- a/arch/mips/sgi-ip22/ip22-setup.c +++ b/arch/mips/sgi-ip22/ip22-setup.c @@ -29,6 +29,7 @@ #include <asm/sgi/ip22.h> unsigned long sgi_gfxaddr; +EXPORT_SYMBOL_GPL(sgi_gfxaddr); /* * Stop-A is originally a Sun thing that isn't standard on IP22 so to avoid diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index ba8e0794630..856649cf9f1 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -207,11 +207,9 @@ static int intr_connect_level(int cpu, int bit) { nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu)); struct slice_data *si = cpu_data[cpu].data; - unsigned long flags; set_bit(bit, si->irq_enable_mask); - local_irq_save(flags); if (!cputoslice(cpu)) { REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]); REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]); @@ -219,7 +217,6 @@ static int intr_connect_level(int cpu, int bit) REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]); REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]); } - local_irq_restore(flags); return 0; } @@ -285,6 +282,8 @@ static unsigned int startup_bridge_irq(unsigned int irq) bridge->b_wid_tflush; + intr_connect_level(cpu, swlevel); + return 0; /* Never anything pending. */ } @@ -292,7 +291,6 @@ static unsigned int startup_bridge_irq(unsigned int irq) static void shutdown_bridge_irq(unsigned int irq) { struct bridge_controller *bc = IRQ_TO_BRIDGE(irq); - struct hub_data *hub = hub_data(cpu_to_node(bc->irq_cpu)); bridge_t *bridge = bc->base; int pin, swlevel; cpuid_t cpu; @@ -307,8 +305,6 @@ static void shutdown_bridge_irq(unsigned int irq) swlevel = find_level(&cpu, irq); intr_disconnect_level(cpu, swlevel); - __clear_bit(swlevel, hub->irq_alloc_mask); - bridge->b_int_enable &= ~(1 << pin); bridge->b_wid_tflush; } diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index 08e79141b47..fbb27728a76 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -171,7 +171,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus) * set sp to the kernel stack of the newly created idle process, gp to the proc * struct so that current_thread_info() will work. */ -void __init prom_boot_secondary(int cpu, struct task_struct *idle) +void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) { unsigned long gp = (unsigned long)task_thread_info(idle); unsigned long sp = __KSTK_TOS(idle); @@ -191,7 +191,7 @@ void __init prom_cpus_done(void) { } -void prom_smp_finish(void) +void __cpuinit prom_smp_finish(void) { } diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index ba0c4b776c8..79ae6ef979b 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -76,7 +76,7 @@ __setup("nokgdb", nokgdb); /* Default to UART1 */ int kgdb_port = 1; -#ifdef CONFIG_SIBYTE_SB1250_DUART +#ifdef CONFIG_SERIAL_SB1250_DUART extern char sb1250_duart_present[]; #endif #endif @@ -404,7 +404,7 @@ void __init arch_init_irq(void) if (kgdb_flag) { kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port; -#ifdef CONFIG_SIBYTE_SB1250_DUART +#ifdef CONFIG_SERIAL_SB1250_DUART sb1250_duart_present[kgdb_port] = 0; #endif /* Setup uart 1 settings, mapper */ diff --git a/arch/mips/sibyte/cfe/console.c b/arch/mips/sibyte/cfe/console.c index c6ec748175b..4cec9d798d2 100644 --- a/arch/mips/sibyte/cfe/console.c +++ b/arch/mips/sibyte/cfe/console.c @@ -46,7 +46,7 @@ static int cfe_console_setup(struct console *cons, char *str) /* XXXKW think about interaction with 'console=' cmdline arg */ /* If none of the console options are configured, the build will break. */ if (cfe_getenv("BOOT_CONSOLE", consdev, 32) >= 0) { -#ifdef CONFIG_SIBYTE_SB1250_DUART +#ifdef CONFIG_SERIAL_SB1250_DUART if (!strcmp(consdev, "uart0")) { setleds("u0cn"); } else if (!strcmp(consdev, "uart1")) { diff --git a/arch/mips/sibyte/cfe/smp.c b/arch/mips/sibyte/cfe/smp.c index eab20e2db32..5de4cff9d14 100644 --- a/arch/mips/sibyte/cfe/smp.c +++ b/arch/mips/sibyte/cfe/smp.c @@ -58,7 +58,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus) * Setup the PC, SP, and GP of a secondary processor and start it * running! */ -void prom_boot_secondary(int cpu, struct task_struct *idle) +void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle) { int retval; @@ -72,7 +72,7 @@ void prom_boot_secondary(int cpu, struct task_struct *idle) /* * Code to run on secondary just after probing the CPU */ -void prom_init_secondary(void) +void __cpuinit prom_init_secondary(void) { #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) extern void bcm1480_smp_init(void); @@ -89,7 +89,7 @@ void prom_init_secondary(void) * Do any tidying up before marking online and running the idle * loop */ -void prom_smp_finish(void) +void __cpuinit prom_smp_finish(void) { #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) extern void bcm1480_smp_finish(void); diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index 0e6a13c0bd0..ad593a6c20b 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -61,7 +61,7 @@ static int kgdb_irq; /* Default to UART1 */ int kgdb_port = 1; -#ifdef CONFIG_SIBYTE_SB1250_DUART +#ifdef CONFIG_SERIAL_SB1250_DUART extern char sb1250_duart_present[]; #endif #endif @@ -359,7 +359,7 @@ void __init arch_init_irq(void) if (kgdb_flag) { kgdb_irq = K_INT_UART_0 + kgdb_port; -#ifdef CONFIG_SIBYTE_SB1250_DUART +#ifdef CONFIG_SERIAL_SB1250_DUART sb1250_duart_present[kgdb_port] = 0; #endif /* Setup uart 1 settings, mapper */ diff --git a/arch/mips/sni/pcimt_scache.c b/arch/mips/sni/pcimt_scache.c deleted file mode 100644 index a59d457fa8b..00000000000 --- a/arch/mips/sni/pcimt_scache.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/mips/sni/pcimt_scache.c - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 1997, 1998 by Ralf Baechle - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <asm/bcache.h> -#include <asm/sni.h> - -#define cacheconf (*(volatile unsigned int *)PCIMT_CACHECONF) -#define invspace (*(volatile unsigned int *)PCIMT_INVSPACE) - -void __init sni_pcimt_sc_init(void) -{ - unsigned int scsiz, sc_size; - - scsiz = cacheconf & 7; - if (scsiz == 0) { - printk("Second level cache is deactived.\n"); - return; - } - if (scsiz >= 6) { - printk("Invalid second level cache size configured, " - "deactivating second level cache.\n"); - cacheconf = 0; - return; - } - - sc_size = 128 << scsiz; - printk("%dkb second level cache detected, deactivating.\n", sc_size); - cacheconf = 0; -} diff --git a/arch/mips/sni/reset.c b/arch/mips/sni/reset.c index 2eada8aea68..38b6a97a31b 100644 --- a/arch/mips/sni/reset.c +++ b/arch/mips/sni/reset.c @@ -40,10 +40,6 @@ void sni_machine_restart(char *command) } } -void sni_machine_halt(void) -{ -} - void sni_machine_power_off(void) { *(volatile unsigned char *)PCIMT_CSWCSM = 0xfd; diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c index 4fedfbda0c7..6edbb3051c8 100644 --- a/arch/mips/sni/setup.c +++ b/arch/mips/sni/setup.c @@ -26,7 +26,6 @@ unsigned int sni_brd_type; extern void sni_machine_restart(char *command); -extern void sni_machine_halt(void); extern void sni_machine_power_off(void); static void __init sni_display_setup(void) @@ -87,7 +86,6 @@ void __init plat_mem_setup(void) } _machine_restart = sni_machine_restart; - _machine_halt = sni_machine_halt; pm_power_off = sni_machine_power_off; sni_display_setup(); diff --git a/arch/mips/tx4927/common/Makefile b/arch/mips/tx4927/common/Makefile index 9cb9535ebac..18375787e09 100644 --- a/arch/mips/tx4927/common/Makefile +++ b/arch/mips/tx4927/common/Makefile @@ -10,3 +10,5 @@ obj-y += tx4927_prom.o tx4927_setup.o tx4927_irq.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o obj-$(CONFIG_KGDB) += tx4927_dbgio.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/tx4927/common/tx4927_irq.c b/arch/mips/tx4927/common/tx4927_irq.c index 00b0b975f34..0aabd57fdad 100644 --- a/arch/mips/tx4927/common/tx4927_irq.c +++ b/arch/mips/tx4927/common/tx4927_irq.c @@ -23,398 +23,20 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/errno.h> #include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> #include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/irq.h> -#include <linux/bitops.h> -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/irq.h> +#include <asm/irq_cpu.h> #include <asm/mipsregs.h> -#include <asm/system.h> #include <asm/tx4927/tx4927.h> #ifdef CONFIG_TOSHIBA_RBTX4927 #include <asm/tx4927/toshiba_rbtx4927.h> #endif -/* - * DEBUG - */ - -#undef TX4927_IRQ_DEBUG - -#ifdef TX4927_IRQ_DEBUG -#define TX4927_IRQ_NONE 0x00000000 - -#define TX4927_IRQ_INFO ( 1 << 0 ) -#define TX4927_IRQ_WARN ( 1 << 1 ) -#define TX4927_IRQ_EROR ( 1 << 2 ) - -#define TX4927_IRQ_INIT ( 1 << 5 ) -#define TX4927_IRQ_NEST1 ( 1 << 6 ) -#define TX4927_IRQ_NEST2 ( 1 << 7 ) -#define TX4927_IRQ_NEST3 ( 1 << 8 ) -#define TX4927_IRQ_NEST4 ( 1 << 9 ) - -#define TX4927_IRQ_CP0_INIT ( 1 << 10 ) -#define TX4927_IRQ_CP0_ENABLE ( 1 << 13 ) -#define TX4927_IRQ_CP0_DISABLE ( 1 << 14 ) - -#define TX4927_IRQ_PIC_INIT ( 1 << 20 ) -#define TX4927_IRQ_PIC_ENABLE ( 1 << 23 ) -#define TX4927_IRQ_PIC_DISABLE ( 1 << 24 ) - -#define TX4927_IRQ_ALL 0xffffffff -#endif - -#ifdef TX4927_IRQ_DEBUG -static const u32 tx4927_irq_debug_flag = (TX4927_IRQ_NONE - | TX4927_IRQ_INFO - | TX4927_IRQ_WARN | TX4927_IRQ_EROR -// | TX4927_IRQ_CP0_INIT -// | TX4927_IRQ_CP0_ENABLE -// | TX4927_IRQ_CP0_ENDIRQ -// | TX4927_IRQ_PIC_INIT -// | TX4927_IRQ_PIC_ENABLE -// | TX4927_IRQ_PIC_DISABLE -// | TX4927_IRQ_INIT -// | TX4927_IRQ_NEST1 -// | TX4927_IRQ_NEST2 -// | TX4927_IRQ_NEST3 -// | TX4927_IRQ_NEST4 - ); -#endif - -#ifdef TX4927_IRQ_DEBUG -#define TX4927_IRQ_DPRINTK(flag,str...) \ - if ( (tx4927_irq_debug_flag) & (flag) ) \ - { \ - char tmp[100]; \ - sprintf( tmp, str ); \ - printk( "%s(%s:%u)::%s", __FUNCTION__, __FILE__, __LINE__, tmp ); \ - } -#else -#define TX4927_IRQ_DPRINTK(flag,str...) -#endif - -/* - * Forwad definitions for all pic's - */ - -static void tx4927_irq_cp0_enable(unsigned int irq); -static void tx4927_irq_cp0_disable(unsigned int irq); - -static void tx4927_irq_pic_enable(unsigned int irq); -static void tx4927_irq_pic_disable(unsigned int irq); - -/* - * Kernel structs for all pic's - */ - -#define TX4927_CP0_NAME "TX4927-CP0" -static struct irq_chip tx4927_irq_cp0_type = { - .name = TX4927_CP0_NAME, - .ack = tx4927_irq_cp0_disable, - .mask = tx4927_irq_cp0_disable, - .mask_ack = tx4927_irq_cp0_disable, - .unmask = tx4927_irq_cp0_enable, -}; - -#define TX4927_PIC_NAME "TX4927-PIC" -static struct irq_chip tx4927_irq_pic_type = { - .name = TX4927_PIC_NAME, - .ack = tx4927_irq_pic_disable, - .mask = tx4927_irq_pic_disable, - .mask_ack = tx4927_irq_pic_disable, - .unmask = tx4927_irq_pic_enable, -}; - -#define TX4927_PIC_ACTION(s) { no_action, 0, CPU_MASK_NONE, s, NULL, NULL } -static struct irqaction tx4927_irq_pic_action = -TX4927_PIC_ACTION(TX4927_PIC_NAME); - -#define CCP0_STATUS 12 -#define CCP0_CAUSE 13 - -/* - * Functions for cp0 - */ - -#define tx4927_irq_cp0_mask(irq) ( 1 << ( irq-TX4927_IRQ_CP0_BEG+8 ) ) - -static void -tx4927_irq_cp0_modify(unsigned cp0_reg, unsigned clr_bits, unsigned set_bits) -{ - unsigned long val = 0; - - switch (cp0_reg) { - case CCP0_STATUS: - val = read_c0_status(); - break; - - case CCP0_CAUSE: - val = read_c0_cause(); - break; - - } - - val &= (~clr_bits); - val |= (set_bits); - - switch (cp0_reg) { - case CCP0_STATUS:{ - write_c0_status(val); - break; - } - case CCP0_CAUSE:{ - write_c0_cause(val); - break; - } - } -} - -static void __init tx4927_irq_cp0_init(void) -{ - int i; - - TX4927_IRQ_DPRINTK(TX4927_IRQ_CP0_INIT, "beg=%d end=%d\n", - TX4927_IRQ_CP0_BEG, TX4927_IRQ_CP0_END); - - for (i = TX4927_IRQ_CP0_BEG; i <= TX4927_IRQ_CP0_END; i++) - set_irq_chip_and_handler(i, &tx4927_irq_cp0_type, - handle_level_irq); -} - -static void tx4927_irq_cp0_enable(unsigned int irq) -{ - TX4927_IRQ_DPRINTK(TX4927_IRQ_CP0_ENABLE, "irq=%d \n", irq); - - tx4927_irq_cp0_modify(CCP0_STATUS, 0, tx4927_irq_cp0_mask(irq)); -} - -static void tx4927_irq_cp0_disable(unsigned int irq) -{ - TX4927_IRQ_DPRINTK(TX4927_IRQ_CP0_DISABLE, "irq=%d \n", irq); - - tx4927_irq_cp0_modify(CCP0_STATUS, tx4927_irq_cp0_mask(irq), 0); -} - -/* - * Functions for pic - */ -u32 tx4927_irq_pic_addr(int irq) -{ - /* MVMCP -- need to formulize this */ - irq -= TX4927_IRQ_PIC_BEG; - switch (irq) { - case 17: - case 16: - case 1: - case 0: - return (0xff1ff610); - - case 19: - case 18: - case 3: - case 2: - return (0xff1ff614); - - case 21: - case 20: - case 5: - case 4: - return (0xff1ff618); - - case 23: - case 22: - case 7: - case 6: - return (0xff1ff61c); - - case 25: - case 24: - case 9: - case 8: - return (0xff1ff620); - - case 27: - case 26: - case 11: - case 10: - return (0xff1ff624); - - case 29: - case 28: - case 13: - case 12: - return (0xff1ff628); - - case 31: - case 30: - case 15: - case 14: - return (0xff1ff62c); - - } - return (0); -} - -u32 tx4927_irq_pic_mask(int irq) -{ - /* MVMCP -- need to formulize this */ - irq -= TX4927_IRQ_PIC_BEG; - switch (irq) { - case 31: - case 29: - case 27: - case 25: - case 23: - case 21: - case 19: - case 17:{ - return (0x07000000); - } - case 30: - case 28: - case 26: - case 24: - case 22: - case 20: - case 18: - case 16:{ - return (0x00070000); - } - case 15: - case 13: - case 11: - case 9: - case 7: - case 5: - case 3: - case 1:{ - return (0x00000700); - } - case 14: - case 12: - case 10: - case 8: - case 6: - case 4: - case 2: - case 0:{ - return (0x00000007); - } - } - return (0x00000000); -} - -static void tx4927_irq_pic_modify(unsigned pic_reg, unsigned clr_bits, - unsigned set_bits) -{ - unsigned long val = 0; - - val = TX4927_RD(pic_reg); - val &= (~clr_bits); - val |= (set_bits); - TX4927_WR(pic_reg, val); -} - -static void __init tx4927_irq_pic_init(void) -{ - int i; - - TX4927_IRQ_DPRINTK(TX4927_IRQ_PIC_INIT, "beg=%d end=%d\n", - TX4927_IRQ_PIC_BEG, TX4927_IRQ_PIC_END); - - for (i = TX4927_IRQ_PIC_BEG; i <= TX4927_IRQ_PIC_END; i++) - set_irq_chip_and_handler(i, &tx4927_irq_pic_type, - handle_level_irq); - - setup_irq(TX4927_IRQ_NEST_PIC_ON_CP0, &tx4927_irq_pic_action); - - TX4927_WR(0xff1ff640, 0x6); /* irq level mask -- only accept hightest */ - TX4927_WR(0xff1ff600, TX4927_RD(0xff1ff600) | 0x1); /* irq enable */ -} - -static void tx4927_irq_pic_enable(unsigned int irq) -{ - TX4927_IRQ_DPRINTK(TX4927_IRQ_PIC_ENABLE, "irq=%d\n", irq); - - tx4927_irq_pic_modify(tx4927_irq_pic_addr(irq), 0, - tx4927_irq_pic_mask(irq)); -} - -static void tx4927_irq_pic_disable(unsigned int irq) -{ - TX4927_IRQ_DPRINTK(TX4927_IRQ_PIC_DISABLE, "irq=%d\n", irq); - - tx4927_irq_pic_modify(tx4927_irq_pic_addr(irq), - tx4927_irq_pic_mask(irq), 0); -} - -/* - * Main init functions - */ void __init tx4927_irq_init(void) { - TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "-\n"); - - TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "=Calling tx4927_irq_cp0_init()\n"); - tx4927_irq_cp0_init(); - - TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "=Calling tx4927_irq_pic_init()\n"); - tx4927_irq_pic_init(); - - TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "+\n"); -} - -static int tx4927_irq_nested(void) -{ - int sw_irq = 0; - u32 level2; - - TX4927_IRQ_DPRINTK(TX4927_IRQ_NEST1, "-\n"); - - level2 = TX4927_RD(0xff1ff6a0); - TX4927_IRQ_DPRINTK(TX4927_IRQ_NEST2, "=level2a=0x%x\n", level2); - - if ((level2 & 0x10000) == 0) { - level2 &= 0x1f; - TX4927_IRQ_DPRINTK(TX4927_IRQ_NEST3, "=level2b=0x%x\n", level2); - - sw_irq = TX4927_IRQ_PIC_BEG + level2; - TX4927_IRQ_DPRINTK(TX4927_IRQ_NEST3, "=sw_irq=%d\n", sw_irq); - - if (sw_irq == 27) { - TX4927_IRQ_DPRINTK(TX4927_IRQ_NEST4, "=irq-%d\n", - sw_irq); - -#ifdef CONFIG_TOSHIBA_RBTX4927 - { - sw_irq = toshiba_rbtx4927_irq_nested(sw_irq); - } -#endif - - TX4927_IRQ_DPRINTK(TX4927_IRQ_NEST4, "=irq+%d\n", - sw_irq); - } - } - - TX4927_IRQ_DPRINTK(TX4927_IRQ_NEST2, "=sw_irq=%d\n", sw_irq); - - TX4927_IRQ_DPRINTK(TX4927_IRQ_NEST1, "+\n"); - - return (sw_irq); + mips_cpu_irq_init(); + txx9_irq_init(TX4927_IRC_REG); + set_irq_chained_handler(TX4927_IRQ_NEST_PIC_ON_CP0, handle_simple_irq); } asmlinkage void plat_irq_dispatch(void) @@ -424,9 +46,12 @@ asmlinkage void plat_irq_dispatch(void) if (pending & STATUSF_IP7) /* cpu timer */ do_IRQ(TX4927_IRQ_CPU_TIMER); else if (pending & STATUSF_IP2) { /* tx4927 pic */ - unsigned int irq = tx4927_irq_nested(); - - if (unlikely(irq == 0)) { + int irq = txx9_irq(); +#ifdef CONFIG_TOSHIBA_RBTX4927 + if (irq == TX4927_IRQ_NEST_EXT_ON_PIC) + irq = toshiba_rbtx4927_irq_nested(irq); +#endif + if (unlikely(irq < 0)) { spurious_interrupt(); return; } diff --git a/arch/mips/tx4927/toshiba_rbtx4927/Makefile b/arch/mips/tx4927/toshiba_rbtx4927/Makefile index 8a991f3c1a6..13f96725d77 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/Makefile +++ b/arch/mips/tx4927/toshiba_rbtx4927/Makefile @@ -1,3 +1,5 @@ obj-y += toshiba_rbtx4927_prom.o obj-y += toshiba_rbtx4927_setup.o obj-y += toshiba_rbtx4927_irq.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c index e265fcd31b6..9607ad5e734 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c @@ -133,6 +133,7 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB #include <linux/bootmem.h> #include <linux/blkdev.h> #ifdef CONFIG_TOSHIBA_FPCIB0 +#include <asm/i8259.h> #include <asm/tx4927/smsc_fdc37m81x.h> #endif #include <asm/tx4927/toshiba_rbtx4927.h> @@ -151,11 +152,6 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB #define TOSHIBA_RBTX4927_IRQ_IOC_ENABLE ( 1 << 13 ) #define TOSHIBA_RBTX4927_IRQ_IOC_DISABLE ( 1 << 14 ) -#define TOSHIBA_RBTX4927_IRQ_ISA_INIT ( 1 << 20 ) -#define TOSHIBA_RBTX4927_IRQ_ISA_ENABLE ( 1 << 23 ) -#define TOSHIBA_RBTX4927_IRQ_ISA_DISABLE ( 1 << 24 ) -#define TOSHIBA_RBTX4927_IRQ_ISA_MASK ( 1 << 25 ) - #define TOSHIBA_RBTX4927_SETUP_ALL 0xffffffff #endif @@ -167,10 +163,6 @@ static const u32 toshiba_rbtx4927_irq_debug_flag = // | TOSHIBA_RBTX4927_IRQ_IOC_INIT // | TOSHIBA_RBTX4927_IRQ_IOC_ENABLE // | TOSHIBA_RBTX4927_IRQ_IOC_DISABLE -// | TOSHIBA_RBTX4927_IRQ_ISA_INIT -// | TOSHIBA_RBTX4927_IRQ_ISA_ENABLE -// | TOSHIBA_RBTX4927_IRQ_ISA_DISABLE -// | TOSHIBA_RBTX4927_IRQ_ISA_MASK ); #endif @@ -196,33 +188,14 @@ static const u32 toshiba_rbtx4927_irq_debug_flag = #define TOSHIBA_RBTX4927_IRQ_IOC_BEG ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG) /* 56 */ #define TOSHIBA_RBTX4927_IRQ_IOC_END ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_END) /* 63 */ - -#define TOSHIBA_RBTX4927_IRQ_ISA_BEG MI8259_IRQ_ISA_BEG -#define TOSHIBA_RBTX4927_IRQ_ISA_END MI8259_IRQ_ISA_END -#define TOSHIBA_RBTX4927_IRQ_ISA_MID ((TOSHIBA_RBTX4927_IRQ_ISA_BEG+TOSHIBA_RBTX4927_IRQ_ISA_END+1)/2) - - #define TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC TX4927_IRQ_NEST_EXT_ON_PIC #define TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC (TOSHIBA_RBTX4927_IRQ_IOC_BEG+2) -#define TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_ISA (TOSHIBA_RBTX4927_IRQ_ISA_BEG+2) extern int tx4927_using_backplane; -#ifdef CONFIG_TOSHIBA_FPCIB0 -extern void enable_8259A_irq(unsigned int irq); -extern void disable_8259A_irq(unsigned int irq); -extern void mask_and_ack_8259A(unsigned int irq); -#endif - static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq); static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq); -#ifdef CONFIG_TOSHIBA_FPCIB0 -static void toshiba_rbtx4927_irq_isa_enable(unsigned int irq); -static void toshiba_rbtx4927_irq_isa_disable(unsigned int irq); -static void toshiba_rbtx4927_irq_isa_mask_and_ack(unsigned int irq); -#endif - #define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC" static struct irq_chip toshiba_rbtx4927_irq_ioc_type = { .name = TOSHIBA_RBTX4927_IOC_NAME, @@ -235,18 +208,6 @@ static struct irq_chip toshiba_rbtx4927_irq_ioc_type = { #define TOSHIBA_RBTX4927_IOC_INTR_STAT 0xbc002006 -#ifdef CONFIG_TOSHIBA_FPCIB0 -#define TOSHIBA_RBTX4927_ISA_NAME "RBTX4927-ISA" -static struct irq_chip toshiba_rbtx4927_irq_isa_type = { - .name = TOSHIBA_RBTX4927_ISA_NAME, - .ack = toshiba_rbtx4927_irq_isa_mask_and_ack, - .mask = toshiba_rbtx4927_irq_isa_disable, - .mask_ack = toshiba_rbtx4927_irq_isa_mask_and_ack, - .unmask = toshiba_rbtx4927_irq_isa_enable, -}; -#endif - - u32 bit2num(u32 num) { u32 i; @@ -271,31 +232,10 @@ int toshiba_rbtx4927_irq_nested(int sw_irq) } } #ifdef CONFIG_TOSHIBA_FPCIB0 - { - if (tx4927_using_backplane) { - u32 level4; - u32 level5; - outb(0x0A, 0x20); - level4 = inb(0x20) & 0xff; - if (level4) { - sw_irq = - TOSHIBA_RBTX4927_IRQ_ISA_BEG + - bit2num(level4); - if (sw_irq != - TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_ISA) { - goto RETURN; - } - } - - outb(0x0A, 0xA0); - level5 = inb(0xA0) & 0xff; - if (level5) { - sw_irq = - TOSHIBA_RBTX4927_IRQ_ISA_MID + - bit2num(level5); - goto RETURN; - } - } + if (tx4927_using_backplane) { + int irq = i8259_irq(); + if (irq >= 0) + sw_irq = irq; } #endif @@ -307,12 +247,6 @@ int toshiba_rbtx4927_irq_nested(int sw_irq) #define TOSHIBA_RBTX4927_PIC_ACTION(s) { no_action, IRQF_SHARED, CPU_MASK_NONE, s, NULL, NULL } static struct irqaction toshiba_rbtx4927_irq_ioc_action = TOSHIBA_RBTX4927_PIC_ACTION(TOSHIBA_RBTX4927_IOC_NAME); -#ifdef CONFIG_TOSHIBA_FPCIB0 -static struct irqaction toshiba_rbtx4927_irq_isa_master = -TOSHIBA_RBTX4927_PIC_ACTION(TOSHIBA_RBTX4927_ISA_NAME "/M"); -static struct irqaction toshiba_rbtx4927_irq_isa_slave = -TOSHIBA_RBTX4927_PIC_ACTION(TOSHIBA_RBTX4927_ISA_NAME "/S"); -#endif /**********************************************************************************/ @@ -378,92 +312,6 @@ static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq) } -/**********************************************************************************/ -/* Functions for isa */ -/**********************************************************************************/ - - -#ifdef CONFIG_TOSHIBA_FPCIB0 -static void __init toshiba_rbtx4927_irq_isa_init(void) -{ - int i; - - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_ISA_INIT, - "beg=%d end=%d\n", - TOSHIBA_RBTX4927_IRQ_ISA_BEG, - TOSHIBA_RBTX4927_IRQ_ISA_END); - - for (i = TOSHIBA_RBTX4927_IRQ_ISA_BEG; - i <= TOSHIBA_RBTX4927_IRQ_ISA_END; i++) - set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_isa_type, - handle_level_irq); - - setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC, - &toshiba_rbtx4927_irq_isa_master); - setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_ISA, - &toshiba_rbtx4927_irq_isa_slave); - - /* make sure we are looking at IRR (not ISR) */ - outb(0x0A, 0x20); - outb(0x0A, 0xA0); -} -#endif - - -#ifdef CONFIG_TOSHIBA_FPCIB0 -static void toshiba_rbtx4927_irq_isa_enable(unsigned int irq) -{ - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_ISA_ENABLE, - "irq=%d\n", irq); - - if (irq < TOSHIBA_RBTX4927_IRQ_ISA_BEG - || irq > TOSHIBA_RBTX4927_IRQ_ISA_END) { - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR, - "bad irq=%d\n", irq); - panic("\n"); - } - - enable_8259A_irq(irq); -} -#endif - - -#ifdef CONFIG_TOSHIBA_FPCIB0 -static void toshiba_rbtx4927_irq_isa_disable(unsigned int irq) -{ - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_ISA_DISABLE, - "irq=%d\n", irq); - - if (irq < TOSHIBA_RBTX4927_IRQ_ISA_BEG - || irq > TOSHIBA_RBTX4927_IRQ_ISA_END) { - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR, - "bad irq=%d\n", irq); - panic("\n"); - } - - disable_8259A_irq(irq); -} -#endif - - -#ifdef CONFIG_TOSHIBA_FPCIB0 -static void toshiba_rbtx4927_irq_isa_mask_and_ack(unsigned int irq) -{ - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_ISA_MASK, - "irq=%d\n", irq); - - if (irq < TOSHIBA_RBTX4927_IRQ_ISA_BEG - || irq > TOSHIBA_RBTX4927_IRQ_ISA_END) { - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR, - "bad irq=%d\n", irq); - panic("\n"); - } - - mask_and_ack_8259A(irq); -} -#endif - - void __init arch_init_irq(void) { extern void tx4927_irq_init(void); @@ -471,12 +319,11 @@ void __init arch_init_irq(void) tx4927_irq_init(); toshiba_rbtx4927_irq_ioc_init(); #ifdef CONFIG_TOSHIBA_FPCIB0 - { - if (tx4927_using_backplane) { - toshiba_rbtx4927_irq_isa_init(); - } - } + if (tx4927_using_backplane) + init_i8259_irqs(); #endif + /* Onboard 10M Ether: High Active */ + set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH); wbflush(); } diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c index ea5a70b252a..3e84237abe6 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c @@ -151,7 +151,6 @@ unsigned long mips_memory_upper; static int tx4927_ccfg_toeon = 1; static int tx4927_pcic_trdyto = 0; /* default: disabled */ unsigned long tx4927_ce_base[8]; -void tx4927_pci_setup(void); void tx4927_reset_pci_pcic(void); int tx4927_pci66 = 0; /* 0:auto */ #endif @@ -442,7 +441,7 @@ arch_initcall(tx4927_pcibios_init); extern struct resource pci_io_resource; extern struct resource pci_mem_resource; -void tx4927_pci_setup(void) +void __init tx4927_pci_setup(void) { static int called = 0; extern unsigned int tx4927_get_mem_size(void); @@ -748,12 +747,6 @@ void __init toshiba_rbtx4927_setup(void) } #endif - /* setup irq stuff */ - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, - ":Setting up tx4927 pic.\n"); - TX4927_WR(0xff1ff604, 0x00000400); /* irq trigger */ - TX4927_WR(0xff1ff608, 0x00000000); /* irq trigger */ - /* setup serial stuff */ TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, ":Setting up tx4927 sio.\n"); @@ -915,7 +908,7 @@ void __init toshiba_rbtx4927_setup(void) req.iotype = UPIO_MEM; req.membase = (char *)(0xff1ff300 + i * 0x100); req.mapbase = 0xff1ff300 + i * 0x100; - req.irq = 32 + i; + req.irq = TX4927_IRQ_PIC_BEG + 8 + i; req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; req.uartclk = 50000000; early_serial_txx9_setup(&req); diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile index 83cda518f20..8352eca6790 100644 --- a/arch/mips/tx4938/common/Makefile +++ b/arch/mips/tx4938/common/Makefile @@ -9,3 +9,4 @@ obj-y += prom.o setup.o irq.o obj-$(CONFIG_KGDB) += dbgio.o +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c index 3a2dbfc2501..c059b899d12 100644 --- a/arch/mips/tx4938/common/irq.c +++ b/arch/mips/tx4938/common/irq.c @@ -11,284 +11,21 @@ * * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) */ -#include <linux/errno.h> #include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> #include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/irq.h> -#include <asm/bitops.h> -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/irq.h> +#include <asm/irq_cpu.h> #include <asm/mipsregs.h> -#include <asm/system.h> -#include <asm/wbflush.h> #include <asm/tx4938/rbtx4938.h> -/**********************************************************************************/ -/* Forwad definitions for all pic's */ -/**********************************************************************************/ - -static void tx4938_irq_cp0_enable(unsigned int irq); -static void tx4938_irq_cp0_disable(unsigned int irq); - -static void tx4938_irq_pic_enable(unsigned int irq); -static void tx4938_irq_pic_disable(unsigned int irq); - -/**********************************************************************************/ -/* Kernel structs for all pic's */ -/**********************************************************************************/ - -#define TX4938_CP0_NAME "TX4938-CP0" -static struct irq_chip tx4938_irq_cp0_type = { - .name = TX4938_CP0_NAME, - .ack = tx4938_irq_cp0_disable, - .mask = tx4938_irq_cp0_disable, - .mask_ack = tx4938_irq_cp0_disable, - .unmask = tx4938_irq_cp0_enable, -}; - -#define TX4938_PIC_NAME "TX4938-PIC" -static struct irq_chip tx4938_irq_pic_type = { - .name = TX4938_PIC_NAME, - .ack = tx4938_irq_pic_disable, - .mask = tx4938_irq_pic_disable, - .mask_ack = tx4938_irq_pic_disable, - .unmask = tx4938_irq_pic_enable, -}; - -static struct irqaction tx4938_irq_pic_action = { - .handler = no_action, - .flags = 0, - .mask = CPU_MASK_NONE, - .name = TX4938_PIC_NAME -}; - -/**********************************************************************************/ -/* Functions for cp0 */ -/**********************************************************************************/ - -#define tx4938_irq_cp0_mask(irq) ( 1 << ( irq-TX4938_IRQ_CP0_BEG+8 ) ) - -static void __init -tx4938_irq_cp0_init(void) -{ - int i; - - for (i = TX4938_IRQ_CP0_BEG; i <= TX4938_IRQ_CP0_END; i++) - set_irq_chip_and_handler(i, &tx4938_irq_cp0_type, - handle_level_irq); -} - -static void -tx4938_irq_cp0_enable(unsigned int irq) -{ - set_c0_status(tx4938_irq_cp0_mask(irq)); -} - -static void -tx4938_irq_cp0_disable(unsigned int irq) -{ - clear_c0_status(tx4938_irq_cp0_mask(irq)); -} - -/**********************************************************************************/ -/* Functions for pic */ -/**********************************************************************************/ - -u32 -tx4938_irq_pic_addr(int irq) -{ - /* MVMCP -- need to formulize this */ - irq -= TX4938_IRQ_PIC_BEG; - - switch (irq) { - case 17: - case 16: - case 1: - case 0:{ - return (TX4938_MKA(TX4938_IRC_IRLVL0)); - } - case 19: - case 18: - case 3: - case 2:{ - return (TX4938_MKA(TX4938_IRC_IRLVL1)); - } - case 21: - case 20: - case 5: - case 4:{ - return (TX4938_MKA(TX4938_IRC_IRLVL2)); - } - case 23: - case 22: - case 7: - case 6:{ - return (TX4938_MKA(TX4938_IRC_IRLVL3)); - } - case 25: - case 24: - case 9: - case 8:{ - return (TX4938_MKA(TX4938_IRC_IRLVL4)); - } - case 27: - case 26: - case 11: - case 10:{ - return (TX4938_MKA(TX4938_IRC_IRLVL5)); - } - case 29: - case 28: - case 13: - case 12:{ - return (TX4938_MKA(TX4938_IRC_IRLVL6)); - } - case 31: - case 30: - case 15: - case 14:{ - return (TX4938_MKA(TX4938_IRC_IRLVL7)); - } - } - - return 0; -} - -u32 -tx4938_irq_pic_mask(int irq) -{ - /* MVMCP -- need to formulize this */ - irq -= TX4938_IRQ_PIC_BEG; - - switch (irq) { - case 31: - case 29: - case 27: - case 25: - case 23: - case 21: - case 19: - case 17:{ - return (0x07000000); - } - case 30: - case 28: - case 26: - case 24: - case 22: - case 20: - case 18: - case 16:{ - return (0x00070000); - } - case 15: - case 13: - case 11: - case 9: - case 7: - case 5: - case 3: - case 1:{ - return (0x00000700); - } - case 14: - case 12: - case 10: - case 8: - case 6: - case 4: - case 2: - case 0:{ - return (0x00000007); - } - } - return 0x00000000; -} - -static void -tx4938_irq_pic_modify(unsigned pic_reg, unsigned clr_bits, unsigned set_bits) -{ - unsigned long val = 0; - - val = TX4938_RD(pic_reg); - val &= (~clr_bits); - val |= (set_bits); - TX4938_WR(pic_reg, val); - mmiowb(); - TX4938_RD(pic_reg); -} - -static void __init -tx4938_irq_pic_init(void) -{ - int i; - - for (i = TX4938_IRQ_PIC_BEG; i <= TX4938_IRQ_PIC_END; i++) - set_irq_chip_and_handler(i, &tx4938_irq_pic_type, - handle_level_irq); - - setup_irq(TX4938_IRQ_NEST_PIC_ON_CP0, &tx4938_irq_pic_action); - - TX4938_WR(0xff1ff640, 0x6); /* irq level mask -- only accept hightest */ - TX4938_WR(0xff1ff600, TX4938_RD(0xff1ff600) | 0x1); /* irq enable */ -} - -static void -tx4938_irq_pic_enable(unsigned int irq) -{ - tx4938_irq_pic_modify(tx4938_irq_pic_addr(irq), 0, - tx4938_irq_pic_mask(irq)); -} - -static void -tx4938_irq_pic_disable(unsigned int irq) -{ - tx4938_irq_pic_modify(tx4938_irq_pic_addr(irq), - tx4938_irq_pic_mask(irq), 0); -} - -/**********************************************************************************/ -/* Main init functions */ -/**********************************************************************************/ - void __init tx4938_irq_init(void) { - tx4938_irq_cp0_init(); - tx4938_irq_pic_init(); + mips_cpu_irq_init(); + txx9_irq_init(TX4938_IRC_REG); + set_irq_chained_handler(TX4938_IRQ_NEST_PIC_ON_CP0, handle_simple_irq); } -int -tx4938_irq_nested(void) -{ - int sw_irq = 0; - u32 level2; - - level2 = TX4938_RD(0xff1ff6a0); - if ((level2 & 0x10000) == 0) { - level2 &= 0x1f; - sw_irq = TX4938_IRQ_PIC_BEG + level2; - if (sw_irq == 26) { - { - extern int toshiba_rbtx4938_irq_nested(int sw_irq); - sw_irq = toshiba_rbtx4938_irq_nested(sw_irq); - } - } - } - - wbflush(); - return sw_irq; -} +int toshiba_rbtx4938_irq_nested(int irq); asmlinkage void plat_irq_dispatch(void) { @@ -297,8 +34,10 @@ asmlinkage void plat_irq_dispatch(void) if (pending & STATUSF_IP7) do_IRQ(TX4938_IRQ_CPU_TIMER); else if (pending & STATUSF_IP2) { - int irq = tx4938_irq_nested(); - if (irq) + int irq = txx9_irq(); + if (irq == TX4938_IRQ_PIC_BEG + TX4938_IR_INT(0)) + irq = toshiba_rbtx4938_irq_nested(irq); + if (irq >= 0) do_IRQ(irq); else spurious_interrupt(); diff --git a/arch/mips/tx4938/toshiba_rbtx4938/Makefile b/arch/mips/tx4938/toshiba_rbtx4938/Makefile index 10c94e62bf5..675bb1c3e40 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/Makefile +++ b/arch/mips/tx4938/toshiba_rbtx4938/Makefile @@ -7,3 +7,5 @@ # obj-y += prom.o setup.o irq.o spi_eeprom.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c index 91aea7aff51..f00185017e8 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/irq.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/irq.c @@ -181,7 +181,7 @@ void __init arch_init_irq(void) tx4938_irq_init(); toshiba_rbtx4938_irq_ioc_init(); /* Onboard 10M Ether: High Active */ - TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM0), 0x00000040); + set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH); wbflush(); } diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c index f9ad482749e..84ebff711e6 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c @@ -773,10 +773,6 @@ void __init tx4938_board_setup(void) txboard_add_phys_region(base, size); } - /* IRC */ - /* disable interrupt control */ - tx4938_ircptr->cer = 0; - /* TMR */ /* disable all timers */ for (i = 0; i < TX4938_NR_TMR; i++) { @@ -875,9 +871,6 @@ void __init toshiba_rbtx4938_setup(void) if (txx9_master_clock == 0) txx9_master_clock = 25000000; /* 25MHz */ tx4938_board_setup(); - /* setup irq stuff */ - TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM0), 0x00000000); /* irq trigger */ - TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM1), 0x00000000); /* irq trigger */ /* setup serial stuff */ TX4938_WR(0xff1ff314, 0x00000000); /* h/w flow control off */ TX4938_WR(0xff1ff414, 0x00000000); /* h/w flow control off */ @@ -897,7 +890,7 @@ void __init toshiba_rbtx4938_setup(void) req.iotype = UPIO_MEM; req.membase = (char *)(0xff1ff300 + i * 0x100); req.mapbase = 0xff1ff300 + i * 0x100; - req.irq = 32 + i; + req.irq = RBTX4938_IRQ_IRC_SIO(i); req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; req.uartclk = 50000000; early_serial_txx9_setup(&req); @@ -1122,7 +1115,7 @@ static void __init txx9_spi_init(unsigned long base, int irq) static int __init rbtx4938_spi_init(void) { struct spi_board_info srtc_info = { - .modalias = "rs5c348", + .modalias = "rtc-rs5c348", .max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */ .bus_num = 0, .chip_select = 16 + SRTC_CS, diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c index bb23ff71c28..2989c6682bf 100644 --- a/arch/parisc/kernel/sys_parisc32.c +++ b/arch/parisc/kernel/sys_parisc32.c @@ -285,147 +285,6 @@ int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf) return err; } -struct linux32_dirent { - u32 d_ino; - compat_off_t d_off; - u16 d_reclen; - char d_name[1]; -}; - -struct old_linux32_dirent { - u32 d_ino; - u32 d_offset; - u16 d_namlen; - char d_name[1]; -}; - -struct getdents32_callback { - struct linux32_dirent __user * current_dir; - struct linux32_dirent __user * previous; - int count; - int error; -}; - -struct readdir32_callback { - struct old_linux32_dirent __user * dirent; - int count; -}; - -#define NAME_OFFSET(de) ((int) ((de)->d_name - (char __user *) (de))) -static int filldir32 (void *__buf, const char *name, int namlen, - loff_t offset, u64 ino, unsigned int d_type) -{ - struct linux32_dirent __user * dirent; - struct getdents32_callback * buf = (struct getdents32_callback *) __buf; - int reclen = ALIGN(NAME_OFFSET(dirent) + namlen + 1, 4); - u32 d_ino; - - buf->error = -EINVAL; /* only used if we fail.. */ - if (reclen > buf->count) - return -EINVAL; - d_ino = ino; - if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) - return -EOVERFLOW; - dirent = buf->previous; - if (dirent) - put_user(offset, &dirent->d_off); - dirent = buf->current_dir; - buf->previous = dirent; - put_user(d_ino, &dirent->d_ino); - put_user(reclen, &dirent->d_reclen); - copy_to_user(dirent->d_name, name, namlen); - put_user(0, dirent->d_name + namlen); - dirent = ((void __user *)dirent) + reclen; - buf->current_dir = dirent; - buf->count -= reclen; - return 0; -} - -asmlinkage long -sys32_getdents (unsigned int fd, void __user * dirent, unsigned int count) -{ - struct file * file; - struct linux32_dirent __user * lastdirent; - struct getdents32_callback buf; - int error; - - error = -EFAULT; - if (!access_ok(VERIFY_WRITE, dirent, count)) - goto out; - - error = -EBADF; - file = fget(fd); - if (!file) - goto out; - - buf.current_dir = (struct linux32_dirent __user *) dirent; - buf.previous = NULL; - buf.count = count; - buf.error = 0; - - error = vfs_readdir(file, filldir32, &buf); - if (error < 0) - goto out_putf; - error = buf.error; - lastdirent = buf.previous; - if (lastdirent) { - if (put_user(file->f_pos, &lastdirent->d_off)) - error = -EFAULT; - else - error = count - buf.count; - } - -out_putf: - fput(file); -out: - return error; -} - -static int fillonedir32(void * __buf, const char * name, int namlen, - loff_t offset, u64 ino, unsigned int d_type) -{ - struct readdir32_callback * buf = (struct readdir32_callback *) __buf; - struct old_linux32_dirent __user * dirent; - u32 d_ino; - - if (buf->count) - return -EINVAL; - d_ino = ino; - if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) - return -EOVERFLOW; - buf->count++; - dirent = buf->dirent; - put_user(d_ino, &dirent->d_ino); - put_user(offset, &dirent->d_offset); - put_user(namlen, &dirent->d_namlen); - copy_to_user(dirent->d_name, name, namlen); - put_user(0, dirent->d_name + namlen); - return 0; -} - -asmlinkage long -sys32_readdir (unsigned int fd, void __user * dirent, unsigned int count) -{ - int error; - struct file * file; - struct readdir32_callback buf; - - error = -EBADF; - file = fget(fd); - if (!file) - goto out; - - buf.count = 0; - buf.dirent = dirent; - - error = vfs_readdir(file, fillonedir32, &buf); - if (error >= 0) - error = buf.count; - fput(file); -out: - return error; -} - /*** copied from mips64 ***/ /* * Ooo, nasty. We need here to frob 32-bit unsigned longs to diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 627f3c28ad8..2540786a970 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -222,9 +222,7 @@ ENTRY_SAME(setfsgid) /* I think this might work */ ENTRY_SAME(llseek) /* 140 */ - /* struct linux_dirent has longs, like 'unsigned long d_ino' which - * almost definitely should be 'ino_t d_ino' but it's too late now */ - ENTRY_DIFF(getdents) + ENTRY_COMP(getdents) /* it is POSSIBLE that select will be OK because even though fd_set * contains longs, the macros and sizes are clever. */ ENTRY_COMP(select) diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index d4e6a93c8d9..ee7a16eb6fd 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -81,6 +81,8 @@ SECTIONS __ex_table : { *(__ex_table) } __stop___ex_table = .; + NOTES + __start___unwind = .; /* unwind info */ .PARISC.unwind : { *(.PARISC.unwind) } __stop___unwind = .; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 4680e201088..3e79bf0a315 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -44,8 +44,18 @@ #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00100000>; // CCSRBAR 1M + + + ranges = <00001000 e0001000 000ff000 + 80000000 80000000 20000000 + a0000000 a0000000 10000000 + b0000000 b0000000 00100000 + c0000000 c0000000 20000000 + b0100000 b0100000 00100000 + e1000000 e1000000 00010000 + e1010000 e1010000 00010000 + e1020000 e1020000 00010000>; + reg = <e0000000 00001000>; // CCSRBAR 1M bus-frequency = <0>; // Filled out by uboot. memory-controller@2000 { @@ -161,8 +171,8 @@ interrupt-parent = <&mpic>; interrupts = <18 2>; bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00800000>; + ranges = <02000000 0 c0000000 c0000000 0 20000000 + 01000000 0 00000000 e1000000 0 00010000>; clock-frequency = <3f940aa>; #interrupt-cells = <1>; #size-cells = <2>; @@ -178,8 +188,8 @@ #address-cells = <3>; reg = <9000 1000>; bus-range = <0 ff>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 e3000000 0 00800000>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e1010000 0 00010000>; clock-frequency = <1fca055>; interrupt-parent = <&mpic>; interrupts = <1a 2>; @@ -202,7 +212,7 @@ reg = <a000 1000>; bus-range = <0 ff>; ranges = <02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 e2800000 0 00800000>; + 01000000 0 00000000 e1020000 0 00010000>; clock-frequency = <1fca055>; interrupt-parent = <&mpic>; interrupts = <19 2>; @@ -224,49 +234,29 @@ #address-cells = <3>; reg = <b000 1000>; bus-range = <0 ff>; - ranges = <02000000 0 b0000000 b0000000 0 10000000 - 01000000 0 00000000 e3800000 0 00800000>; + ranges = <02000000 0 b0000000 b0000000 0 00100000 + 01000000 0 00000000 b0100000 0 00100000>; clock-frequency = <1fca055>; interrupt-parent = <&mpic>; interrupts = <1b 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <fb00 0 0 0>; interrupt-map = < - - // IDSEL 0x1a - d000 0 0 1 &i8259 6 2 - d000 0 0 2 &i8259 3 2 - d000 0 0 3 &i8259 4 2 - d000 0 0 4 &i8259 5 2 - - // IDSEL 0x1b - d800 0 0 1 &i8259 5 2 - d800 0 0 2 &i8259 0 0 - d800 0 0 3 &i8259 0 0 - d800 0 0 4 &i8259 0 0 - // IDSEL 0x1c USB - e000 0 0 1 &i8259 9 2 - e000 0 0 2 &i8259 a 2 - e000 0 0 3 &i8259 c 2 - e000 0 0 4 &i8259 7 2 + e000 0 0 0 &i8259 c 2 + e100 0 0 0 &i8259 9 2 + e200 0 0 0 &i8259 a 2 + e300 0 0 0 &i8259 b 2 // IDSEL 0x1d Audio - e800 0 0 1 &i8259 9 2 - e800 0 0 2 &i8259 a 2 - e800 0 0 3 &i8259 b 2 - e800 0 0 4 &i8259 0 0 + e800 0 0 0 &i8259 6 2 // IDSEL 0x1e Legacy - f000 0 0 1 &i8259 c 2 - f000 0 0 2 &i8259 0 0 - f000 0 0 3 &i8259 0 0 - f000 0 0 4 &i8259 0 0 + f000 0 0 0 &i8259 7 2 + f100 0 0 0 &i8259 7 2 // IDSEL 0x1f IDE/SATA - f800 0 0 1 &i8259 6 2 - f800 0 0 2 &i8259 0 0 - f800 0 0 3 &i8259 0 0 - f800 0 0 4 &i8259 0 0 + f800 0 0 0 &i8259 e 2 + f900 0 0 0 &i8259 5 2 >; uli1575@0 { reg = <0 0 0 0 0>; @@ -274,10 +264,10 @@ #address-cells = <3>; ranges = <02000000 0 b0000000 02000000 0 b0000000 - 0 10000000 + 0 00100000 01000000 0 00000000 01000000 0 00000000 - 0 00080000>; + 0 00100000>; pci_bridge@0 { reg = <0 0 0 0 0>; @@ -285,10 +275,10 @@ #address-cells = <3>; ranges = <02000000 0 b0000000 02000000 0 b0000000 - 0 20000000 + 0 00100000 01000000 0 00000000 01000000 0 00000000 - 0 00100000>; + 0 00100000>; isa@1e { device_type = "isa"; @@ -296,7 +286,8 @@ #size-cells = <1>; #address-cells = <2>; reg = <f000 0 0 0 0>; - ranges = <1 0 01000000 0 0 + ranges = <1 0 + 01000000 0 0 00001000>; interrupt-parent = <&i8259>; @@ -312,8 +303,7 @@ built-in; compatible = "chrp,iic"; interrupts = <9 2>; - interrupt-parent = - <&mpic>; + interrupt-parent = <&mpic>; }; i8042@60 { @@ -321,8 +311,7 @@ #address-cells = <1>; reg = <1 60 1 1 64 1>; interrupts = <1 3 c 3>; - interrupt-parent = - <&i8259>; + interrupt-parent = <&i8259>; keyboard@0 { reg = <0>; @@ -336,8 +325,7 @@ }; rtc@70 { - compatible = - "pnpPNP,b00"; + compatible = "pnpPNP,b00"; reg = <1 70 2>; }; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 5d82709cfcb..b0166e5c177 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -224,98 +224,36 @@ clock-frequency = <1fca055>; interrupt-parent = <&mpic>; interrupts = <18 2>; - interrupt-map-mask = <f800 0 0 7>; + interrupt-map-mask = <fb00 0 0 0>; interrupt-map = < /* IDSEL 0x11 */ - 8800 0 0 1 &i8259 3 2 - 8800 0 0 2 &i8259 4 2 - 8800 0 0 3 &i8259 5 2 - 8800 0 0 4 &i8259 6 2 + 8800 0 0 1 &i8259 9 2 + 8800 0 0 2 &i8259 a 2 + 8800 0 0 3 &i8259 b 2 + 8800 0 0 4 &i8259 c 2 /* IDSEL 0x12 */ - 9000 0 0 1 &i8259 4 2 - 9000 0 0 2 &i8259 5 2 - 9000 0 0 3 &i8259 6 2 - 9000 0 0 4 &i8259 3 2 - - /* IDSEL 0x13 */ - 9800 0 0 1 &i8259 0 0 - 9800 0 0 2 &i8259 0 0 - 9800 0 0 3 &i8259 0 0 - 9800 0 0 4 &i8259 0 0 - - /* IDSEL 0x14 */ - a000 0 0 1 &i8259 0 0 - a000 0 0 2 &i8259 0 0 - a000 0 0 3 &i8259 0 0 - a000 0 0 4 &i8259 0 0 - - /* IDSEL 0x15 */ - a800 0 0 1 &i8259 0 0 - a800 0 0 2 &i8259 0 0 - a800 0 0 3 &i8259 0 0 - a800 0 0 4 &i8259 0 0 - - /* IDSEL 0x16 */ - b000 0 0 1 &i8259 0 0 - b000 0 0 2 &i8259 0 0 - b000 0 0 3 &i8259 0 0 - b000 0 0 4 &i8259 0 0 - - /* IDSEL 0x17 */ - b800 0 0 1 &i8259 0 0 - b800 0 0 2 &i8259 0 0 - b800 0 0 3 &i8259 0 0 - b800 0 0 4 &i8259 0 0 - - /* IDSEL 0x18 */ - c000 0 0 1 &i8259 0 0 - c000 0 0 2 &i8259 0 0 - c000 0 0 3 &i8259 0 0 - c000 0 0 4 &i8259 0 0 - - /* IDSEL 0x19 */ - c800 0 0 1 &i8259 0 0 - c800 0 0 2 &i8259 0 0 - c800 0 0 3 &i8259 0 0 - c800 0 0 4 &i8259 0 0 - - /* IDSEL 0x1a */ - d000 0 0 1 &i8259 6 2 - d000 0 0 2 &i8259 3 2 - d000 0 0 3 &i8259 4 2 - d000 0 0 4 &i8259 5 2 - - - /* IDSEL 0x1b */ - d800 0 0 1 &i8259 5 2 - d800 0 0 2 &i8259 0 0 - d800 0 0 3 &i8259 0 0 - d800 0 0 4 &i8259 0 0 - - /* IDSEL 0x1c */ - e000 0 0 1 &i8259 9 2 - e000 0 0 2 &i8259 a 2 - e000 0 0 3 &i8259 c 2 - e000 0 0 4 &i8259 7 2 - - /* IDSEL 0x1d */ - e800 0 0 1 &i8259 9 2 - e800 0 0 2 &i8259 a 2 - e800 0 0 3 &i8259 b 2 - e800 0 0 4 &i8259 0 0 - - /* IDSEL 0x1e */ - f000 0 0 1 &i8259 c 2 - f000 0 0 2 &i8259 0 0 - f000 0 0 3 &i8259 0 0 - f000 0 0 4 &i8259 0 0 - - /* IDSEL 0x1f */ - f800 0 0 1 &i8259 6 2 - f800 0 0 2 &i8259 0 0 - f800 0 0 3 &i8259 0 0 - f800 0 0 4 &i8259 0 0 + 9000 0 0 1 &i8259 a 2 + 9000 0 0 2 &i8259 b 2 + 9000 0 0 3 &i8259 c 2 + 9000 0 0 4 &i8259 9 2 + + // IDSEL 0x1c USB + e000 0 0 0 &i8259 c 2 + e100 0 0 0 &i8259 9 2 + e200 0 0 0 &i8259 a 2 + e300 0 0 0 &i8259 b 2 + + // IDSEL 0x1d Audio + e800 0 0 0 &i8259 6 2 + + // IDSEL 0x1e Legacy + f000 0 0 0 &i8259 7 2 + f100 0 0 0 &i8259 7 2 + + // IDSEL 0x1f IDE/SATA + f800 0 0 0 &i8259 e 2 + f900 0 0 0 &i8259 5 2 >; uli1575@0 { reg = <0 0 0 0 0>; diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index d9ac24e8de1..8b47c846421 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,9 +1,23 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc6 -# Tue Jun 26 12:32:34 2007 +# Linux kernel version: 2.6.23-rc3 +# Wed Aug 22 15:19:19 2007 # CONFIG_PPC64=y + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_MM_SLICES=y +CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_SMP=y +CONFIG_NR_CPUS=4 CONFIG_64BIT=y CONFIG_PPC_MERGE=y CONFIG_MMU=y @@ -15,6 +29,7 @@ CONFIG_ARCH_HAS_ILOG2_U64=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y @@ -22,51 +37,33 @@ CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y +CONFIG_OF=y CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set - -# -# Processor support -# -# CONFIG_POWER4_ONLY is not set -CONFIG_POWER3=y -CONFIG_POWER4=y -CONFIG_PPC_FPU=y # CONFIG_PPC_DCR_NATIVE is not set CONFIG_PPC_DCR_MMIO=y CONFIG_PPC_DCR=y CONFIG_PPC_OF_PLATFORM_PCI=y -CONFIG_ALTIVEC=y -CONFIG_PPC_STD_MMU=y -CONFIG_PPC_MM_SLICES=y -CONFIG_VIRT_CPU_ACCOUNTING=y -CONFIG_SMP=y -CONFIG_NR_CPUS=4 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -96,16 +93,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -113,12 +107,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -138,7 +129,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_MULTIPLATFORM=y # CONFIG_EMBEDDED6xx is not set -# CONFIG_APUS is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set # CONFIG_PPC_MPC52xx is not set @@ -158,7 +151,11 @@ CONFIG_PS3_HTAB_SIZE=20 CONFIG_PS3_USE_LPAR_ADDR=y CONFIG_PS3_VUART=y CONFIG_PS3_PS3AV=y -CONFIG_PS3_SYS_MANAGER=y +CONFIG_PS3_SYS_MANAGER=m +CONFIG_PS3_STORAGE=y +CONFIG_PS3_DISK=y +CONFIG_PS3_ROM=m +CONFIG_PS3_FLASH=m CONFIG_PPC_CELL=y CONFIG_PPC_CELL_NATIVE=y CONFIG_PPC_IBM_CELL_BLADE=y @@ -171,6 +168,7 @@ CONFIG_SPU_BASE=y CONFIG_CBE_RAS=y CONFIG_CBE_THERM=m CONFIG_CBE_CPUFREQ=m +CONFIG_CBE_CPUFREQ_PMI=m # CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y CONFIG_UDBG_RTAS_CONSOLE=y @@ -183,7 +181,7 @@ CONFIG_PPC_RTAS=y # CONFIG_RTAS_ERROR_LOGGING is not set CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=y -# CONFIG_PPC_PMI is not set +CONFIG_PPC_PMI=m CONFIG_MMIO_NVRAM=y # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set @@ -206,6 +204,8 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # CPU Frequency drivers # # CONFIG_CPM2 is not set +CONFIG_AXON_RAM=m +# CONFIG_FSL_ULI1575 is not set # # Kernel options @@ -248,6 +248,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_NODES_SPAN_OTHER_NODES=y CONFIG_PPC_HAS_HASH_64K=y @@ -268,7 +269,9 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_DEBUG is not set @@ -359,6 +362,7 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m @@ -377,6 +381,7 @@ CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # @@ -448,6 +453,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -462,28 +468,12 @@ CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set - -# -# Parallel port support -# +CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set @@ -499,14 +489,11 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y @@ -572,6 +559,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -604,10 +592,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -622,7 +607,6 @@ CONFIG_SCSI_SAS_ATTRS=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -696,10 +680,6 @@ CONFIG_PATA_PDC2027X=m # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_SCC is not set - -# -# Multi-device support (RAID and LVM) -# CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -717,6 +697,7 @@ CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m # CONFIG_DM_MULTIPATH_EMC is not set +# CONFIG_DM_MULTIPATH_RDAC is not set # CONFIG_DM_DELAY is not set # @@ -728,43 +709,30 @@ CONFIG_FUSION=y CONFIG_FUSION_SAS=y CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set +# CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set CONFIG_BONDING=m +CONFIG_MACVLAN=m # CONFIG_EQUALIZER is not set CONFIG_TUN=y # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set @@ -781,11 +749,12 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set CONFIG_SKGE=m CONFIG_SKY2=m -# CONFIG_SK98LIN is not set +# CONFIG_SKY2_DEBUG is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set CONFIG_SPIDER_NET=y +CONFIG_GELIC_NET=m # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y @@ -824,15 +793,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -925,10 +886,6 @@ CONFIG_UNIX98_PTYS=y CONFIG_HVC_DRIVER=y CONFIG_HVC_RTAS=y CONFIG_HVC_BEAT=y - -# -# IPMI -# CONFIG_IPMI_HANDLER=m # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m @@ -963,10 +920,6 @@ CONFIG_GEN_RTC=y # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y CONFIG_I2C=y @@ -1000,6 +953,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set @@ -1011,11 +965,13 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -1026,11 +982,8 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # @@ -1055,6 +1008,7 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set @@ -1068,10 +1022,7 @@ CONFIG_DUMMY_CONSOLE=y # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set @@ -1085,10 +1036,7 @@ CONFIG_HID=m # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y @@ -1122,6 +1070,7 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -1199,23 +1148,7 @@ CONFIG_USB_MON=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m @@ -1231,14 +1164,13 @@ CONFIG_INFINIBAND_IPOIB_DEBUG=y CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y # CONFIG_INFINIBAND_SRP is not set # CONFIG_INFINIBAND_ISER is not set +CONFIG_EDAC=y # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock +# Reporting subsystems # +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_MM_EDAC=y # CONFIG_RTC_CLASS is not set # @@ -1255,6 +1187,12 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y # # +# Userspace I/O +# +CONFIG_UIO=m +# CONFIG_UIO_CIF is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -1357,7 +1295,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1439,6 +1376,7 @@ CONFIG_BITREVERSE=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m @@ -1471,9 +1409,10 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_SLUB_DEBUG_ON is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1504,10 +1443,6 @@ CONFIG_IRQSTACKS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m @@ -1546,7 +1481,4 @@ CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_HW=y diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 2bb1cb91178..d8502e37751 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -299,7 +299,7 @@ static inline int check_io_access(struct pt_regs *regs) #ifndef CONFIG_FSL_BOOKE #define get_mc_reason(regs) ((regs)->dsisr) #else -#define get_mc_reason(regs) (mfspr(SPRN_MCSR)) +#define get_mc_reason(regs) (mfspr(SPRN_MCSR) & MCSR_MASK) #endif #define REASON_FP ESR_FP #define REASON_ILLEGAL (ESR_PIL | ESR_PUO) @@ -414,8 +414,6 @@ void machine_check_exception(struct pt_regs *regs) printk("Data Cache Push Parity Error\n"); if (reason & MCSR_DCPERR) printk("Data Cache Parity Error\n"); - if (reason & MCSR_GL_CI) - printk("Guarded Load or Cache-Inhibited stwcx.\n"); if (reason & MCSR_BUS_IAERR) printk("Bus - Instruction Address Error\n"); if (reason & MCSR_BUS_RAERR) diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index a73d2d70097..ff1811ac6c8 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -74,6 +74,22 @@ static inline void slb_shadow_clear(unsigned long entry) get_slb_shadow()->save_area[entry].esid = 0; } +static inline void create_shadowed_slbe(unsigned long ea, unsigned long flags, + unsigned long entry) +{ + /* + * Updating the shadow buffer before writing the SLB ensures + * we don't get a stale entry here if we get preempted by PHYP + * between these two statements. + */ + slb_shadow_update(ea, flags, entry); + + asm volatile("slbmte %0,%1" : + : "r" (mk_vsid_data(ea, flags)), + "r" (mk_esid_data(ea, entry)) + : "memory" ); +} + void slb_flush_and_rebolt(void) { /* If you change this make sure you change SLB_NUM_BOLTED @@ -226,12 +242,16 @@ void slb_initialize(void) vflags = SLB_VSID_KERNEL | vmalloc_llp; /* Invalidate the entire SLB (even slot 0) & all the ERATS */ - slb_shadow_update(PAGE_OFFSET, lflags, 0); - asm volatile("isync; slbia; sync; slbmte %0,%1; isync" :: - "r" (get_slb_shadow()->save_area[0].vsid), - "r" (get_slb_shadow()->save_area[0].esid) : "memory"); - - slb_shadow_update(VMALLOC_START, vflags, 1); - - slb_flush_and_rebolt(); + asm volatile("isync":::"memory"); + asm volatile("slbmte %0,%0"::"r" (0) : "memory"); + asm volatile("isync; slbia; isync":::"memory"); + create_shadowed_slbe(PAGE_OFFSET, lflags, 0); + + create_shadowed_slbe(VMALLOC_START, vflags, 1); + + /* We don't bolt the stack for the time being - we're in boot, + * so the stack is in the bolted segment. By the time it goes + * elsewhere, we'll call _switch() which will bolt in the new + * one. */ + asm volatile("isync":::"memory"); } diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index f58184086c8..f620171ad6b 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -33,6 +33,7 @@ config MPC8544_DS bool "Freescale MPC8544 DS" select PPC_I8259 select DEFAULT_UIMAGE + select FSL_ULI1575 help This option enables support for the MPC8544 DS board diff --git a/arch/powerpc/platforms/85xx/mpc8544_ds.c b/arch/powerpc/platforms/85xx/mpc8544_ds.c index 4905f6f8903..0f834d8be44 100644 --- a/arch/powerpc/platforms/85xx/mpc8544_ds.c +++ b/arch/powerpc/platforms/85xx/mpc8544_ds.c @@ -114,211 +114,25 @@ void __init mpc8544_ds_pic_init(void) } #ifdef CONFIG_PCI -enum pirq { PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH }; +extern int uses_fsl_uli_m1575; +extern int uli_exclude_device(struct pci_controller *hose, + u_char bus, u_char devfn); -/* - * Value in table -- IRQ number - */ -const unsigned char uli1575_irq_route_table[16] = { - 0, /* 0: Reserved */ - 0x8, - 0, /* 2: Reserved */ - 0x2, - 0x4, - 0x5, - 0x7, - 0x6, - 0, /* 8: Reserved */ - 0x1, - 0x3, - 0x9, - 0xb, - 0, /* 13: Reserved */ - 0xd, - 0xf, -}; - -static int __devinit -get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin) -{ - struct of_irq oirq; - u32 laddr[3]; - struct device_node *hosenode = hose ? hose->arch_data : NULL; - - if (!hosenode) - return -EINVAL; - - laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8); - laddr[1] = laddr[2] = 0; - of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq); - DBG("mpc8544_ds: pci irq addr %x, slot %d, pin %d, irq %d\n", - laddr[0], slot, pin, oirq.specifier[0]); - return oirq.specifier[0]; -} - -/*8259*/ -static void __devinit quirk_uli1575(struct pci_dev *dev) -{ - unsigned short temp; - struct pci_controller *hose = pci_bus_to_host(dev->bus); - unsigned char irq2pin[16]; - unsigned long pirq_map_word = 0; - u32 irq; - int i; - - /* - * ULI1575 interrupts route setup - */ - memset(irq2pin, 0, 16); /* Initialize default value 0 */ - - irq2pin[6]=PIRQA+3; /* enabled mapping for IRQ6 to PIRQD, used by SATA */ - - /* - * PIRQE -> PIRQF mapping set manually - * - * IRQ pin IRQ# - * PIRQE ---- 9 - * PIRQF ---- 10 - * PIRQG ---- 11 - * PIRQH ---- 12 - */ - for (i = 0; i < 4; i++) - irq2pin[i + 9] = PIRQE + i; - - /* Set IRQ-PIRQ Mapping to ULI1575 */ - for (i = 0; i < 16; i++) - if (irq2pin[i]) - pirq_map_word |= (uli1575_irq_route_table[i] & 0xf) - << ((irq2pin[i] - PIRQA) * 4); - - pirq_map_word |= 1<<26; /* disable INTx in EP mode*/ - - /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */ - DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n", - (int)pirq_map_word); - pci_write_config_dword(dev, 0x48, pirq_map_word); - -#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \ - do { \ - int irq; \ - irq = get_pci_irq_from_of(hose, slot, pin); \ - if (irq > 0 && irq < 16) \ - pci_write_config_byte(dev, reg, irq2pin[irq]); \ - else \ - printk(KERN_WARNING "ULI1575 device" \ - "(slot %d, pin %d) irq %d is invalid.\n", \ - slot, pin, irq); \ - } while(0) - - /* USB 1.1 OHCI controller 1, slot 28, pin 1 */ - ULI1575_SET_DEV_IRQ(28, 1, 0x86); - - /* USB 1.1 OHCI controller 2, slot 28, pin 2 */ - ULI1575_SET_DEV_IRQ(28, 2, 0x87); - - /* USB 1.1 OHCI controller 3, slot 28, pin 3 */ - ULI1575_SET_DEV_IRQ(28, 3, 0x88); - - /* USB 2.0 controller, slot 28, pin 4 */ - irq = get_pci_irq_from_of(hose, 28, 4); - if (irq >= 0 && irq <= 15) - pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]); - - /* Audio controller, slot 29, pin 1 */ - ULI1575_SET_DEV_IRQ(29, 1, 0x8a); - - /* Modem controller, slot 29, pin 2 */ - ULI1575_SET_DEV_IRQ(29, 2, 0x8b); - - /* HD audio controller, slot 29, pin 3 */ - ULI1575_SET_DEV_IRQ(29, 3, 0x8c); - - /* SMB interrupt: slot 30, pin 1 */ - ULI1575_SET_DEV_IRQ(30, 1, 0x8e); - - /* PMU ACPI SCI interrupt: slot 30, pin 2 */ - ULI1575_SET_DEV_IRQ(30, 2, 0x8f); - - /* Serial ATA interrupt: slot 31, pin 1 */ - ULI1575_SET_DEV_IRQ(31, 1, 0x8d); - - /* Primary PATA IDE IRQ: 14 - * Secondary PATA IDE IRQ: 15 - */ - pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]); - pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]); - - /* Set IRQ14 and IRQ15 to legacy IRQs */ - pci_read_config_word(dev, 0x46, &temp); - temp |= 0xc000; - pci_write_config_word(dev, 0x46, temp); - - /* Set i8259 interrupt trigger - * IRQ 3: Level - * IRQ 4: Level - * IRQ 5: Level - * IRQ 6: Level - * IRQ 7: Level - * IRQ 9: Level - * IRQ 10: Level - * IRQ 11: Level - * IRQ 12: Level - * IRQ 14: Edge - * IRQ 15: Edge - */ - outb(0xfa, 0x4d0); - outb(0x1e, 0x4d1); - -#undef ULI1575_SET_DEV_IRQ -} - -/* SATA */ -static void __devinit quirk_uli5288(struct pci_dev *dev) +static int mpc85xx_exclude_device(struct pci_controller *hose, + u_char bus, u_char devfn) { - unsigned char c; - - pci_read_config_byte(dev, 0x83, &c); - c |= 0x80; /* read/write lock */ - pci_write_config_byte(dev, 0x83, c); - - pci_write_config_byte(dev, 0x09, 0x01); /* Base class code: storage */ - pci_write_config_byte(dev, 0x0a, 0x06); /* IDE disk */ + struct device_node* node; + struct resource rsrc; - pci_read_config_byte(dev, 0x83, &c); - c &= 0x7f; - pci_write_config_byte(dev, 0x83, c); - - pci_read_config_byte(dev, 0x84, &c); - c |= 0x01; /* emulated PATA mode enabled */ - pci_write_config_byte(dev, 0x84, c); -} + node = (struct device_node *)hose->arch_data; + of_address_to_resource(node, 0, &rsrc); -/* PATA */ -static void __devinit quirk_uli5229(struct pci_dev *dev) -{ - unsigned short temp; - pci_write_config_word(dev, 0x04, 0x0405); /* MEM IO MSI */ - pci_read_config_word(dev, 0x4a, &temp); - temp |= 0x1000; /* Enable Native IRQ 14/15 */ - pci_write_config_word(dev, 0x4a, temp); -} + if ((rsrc.start & 0xfffff) == 0xb000) { + return uli_exclude_device(hose, bus, devfn); + } -/*Bridge*/ -static void __devinit early_uli5249(struct pci_dev *dev) -{ - unsigned char temp; - pci_write_config_word(dev, 0x04, 0x0007); /* mem access */ - pci_read_config_byte(dev, 0x7c, &temp); - pci_write_config_byte(dev, 0x7c, 0x80); /* R/W lock control */ - pci_write_config_byte(dev, 0x09, 0x01); /* set as pci-pci bridge */ - pci_write_config_byte(dev, 0x7c, temp); /* restore pci bus debug control */ - dev->class |= 0x1; + return PCIBIOS_SUCCESSFUL; } - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); #endif /* CONFIG_PCI */ /* @@ -342,6 +156,8 @@ static void __init mpc8544_ds_setup_arch(void) else fsl_add_bridge(np, 0); } + uses_fsl_uli_m1575 = 1; + ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif printk("MPC8544 DS board from Freescale Semiconductor\n"); diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 343b76d0d79..685b2fbbbe0 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -7,6 +7,7 @@ config MPC8641_HPCN bool "Freescale MPC8641 HPCN" select PPC_I8259 select DEFAULT_UIMAGE + select FSL_ULI1575 help This option enables support for the MPC8641 HPCN board. diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index e9eaa0749ae..56b27caf7a2 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -107,220 +107,25 @@ mpc86xx_hpcn_init_irq(void) } #ifdef CONFIG_PCI +extern int uses_fsl_uli_m1575; +extern int uli_exclude_device(struct pci_controller *hose, + u_char bus, u_char devfn); -enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH}; -const unsigned char uli1575_irq_route_table[16] = { - 0, /* 0: Reserved */ - 0x8, /* 1: 0b1000 */ - 0, /* 2: Reserved */ - 0x2, /* 3: 0b0010 */ - 0x4, /* 4: 0b0100 */ - 0x5, /* 5: 0b0101 */ - 0x7, /* 6: 0b0111 */ - 0x6, /* 7: 0b0110 */ - 0, /* 8: Reserved */ - 0x1, /* 9: 0b0001 */ - 0x3, /* 10: 0b0011 */ - 0x9, /* 11: 0b1001 */ - 0xb, /* 12: 0b1011 */ - 0, /* 13: Reserved */ - 0xd, /* 14, 0b1101 */ - 0xf, /* 15, 0b1111 */ -}; - -static int __devinit -get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin) -{ - struct of_irq oirq; - u32 laddr[3]; - struct device_node *hosenode = hose ? hose->arch_data : NULL; - - if (!hosenode) return -EINVAL; - - laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8); - laddr[1] = laddr[2] = 0; - of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq); - DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n", - laddr[0], slot, pin, oirq.specifier[0]); - return oirq.specifier[0]; -} - -static void __devinit quirk_uli1575(struct pci_dev *dev) -{ - unsigned short temp; - struct pci_controller *hose = pci_bus_to_host(dev->bus); - unsigned char irq2pin[16], c; - unsigned long pirq_map_word = 0; - u32 irq; - int i; - - /* - * ULI1575 interrupts route setup - */ - memset(irq2pin, 0, 16); /* Initialize default value 0 */ - - /* - * PIRQA -> PIRQD mapping read from OF-tree - * - * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD - * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA - */ - for (i = 0; i < 4; i++){ - irq = get_pci_irq_from_of(hose, 17, i + 1); - if (irq > 0 && irq < 16) - irq2pin[irq] = PIRQA + i; - else - printk(KERN_WARNING "ULI1575 device" - "(slot %d, pin %d) irq %d is invalid.\n", - 17, i, irq); - } - - /* - * PIRQE -> PIRQF mapping set manually - * - * IRQ pin IRQ# - * PIRQE ---- 9 - * PIRQF ---- 10 - * PIRQG ---- 11 - * PIRQH ---- 12 - */ - for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i; - - /* Set IRQ-PIRQ Mapping to ULI1575 */ - for (i = 0; i < 16; i++) - if (irq2pin[i]) - pirq_map_word |= (uli1575_irq_route_table[i] & 0xf) - << ((irq2pin[i] - PIRQA) * 4); - - /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */ - DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n", - pirq_map_word); - pci_write_config_dword(dev, 0x48, pirq_map_word); - -#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \ - do { \ - int irq; \ - irq = get_pci_irq_from_of(hose, slot, pin); \ - if (irq > 0 && irq < 16) \ - pci_write_config_byte(dev, reg, irq2pin[irq]); \ - else \ - printk(KERN_WARNING "ULI1575 device" \ - "(slot %d, pin %d) irq %d is invalid.\n", \ - slot, pin, irq); \ - } while(0) - - /* USB 1.1 OHCI controller 1, slot 28, pin 1 */ - ULI1575_SET_DEV_IRQ(28, 1, 0x86); - - /* USB 1.1 OHCI controller 2, slot 28, pin 2 */ - ULI1575_SET_DEV_IRQ(28, 2, 0x87); - - /* USB 1.1 OHCI controller 3, slot 28, pin 3 */ - ULI1575_SET_DEV_IRQ(28, 3, 0x88); - - /* USB 2.0 controller, slot 28, pin 4 */ - irq = get_pci_irq_from_of(hose, 28, 4); - if (irq >= 0 && irq <=15) - pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]); - - /* Audio controller, slot 29, pin 1 */ - ULI1575_SET_DEV_IRQ(29, 1, 0x8a); - - /* Modem controller, slot 29, pin 2 */ - ULI1575_SET_DEV_IRQ(29, 2, 0x8b); - - /* HD audio controller, slot 29, pin 3 */ - ULI1575_SET_DEV_IRQ(29, 3, 0x8c); - - /* SMB interrupt: slot 30, pin 1 */ - ULI1575_SET_DEV_IRQ(30, 1, 0x8e); - - /* PMU ACPI SCI interrupt: slot 30, pin 2 */ - ULI1575_SET_DEV_IRQ(30, 2, 0x8f); - - /* Serial ATA interrupt: slot 31, pin 1 */ - ULI1575_SET_DEV_IRQ(31, 1, 0x8d); - - /* Primary PATA IDE IRQ: 14 - * Secondary PATA IDE IRQ: 15 - */ - pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]); - pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]); - - /* Set IRQ14 and IRQ15 to legacy IRQs */ - pci_read_config_word(dev, 0x46, &temp); - temp |= 0xc000; - pci_write_config_word(dev, 0x46, temp); - - /* Set i8259 interrupt trigger - * IRQ 3: Level - * IRQ 4: Level - * IRQ 5: Level - * IRQ 6: Level - * IRQ 7: Level - * IRQ 9: Level - * IRQ 10: Level - * IRQ 11: Level - * IRQ 12: Level - * IRQ 14: Edge - * IRQ 15: Edge - */ - outb(0xfa, 0x4d0); - outb(0x1e, 0x4d1); - -#undef ULI1575_SET_DEV_IRQ - - /* Disable the HD interface and enable the AC97 interface. */ - pci_read_config_byte(dev, 0xb8, &c); - c &= 0x7f; - pci_write_config_byte(dev, 0xb8, c); -} - -static void __devinit quirk_uli5288(struct pci_dev *dev) +static int mpc86xx_exclude_device(struct pci_controller *hose, + u_char bus, u_char devfn) { - unsigned char c; + struct device_node* node; + struct resource rsrc; - pci_read_config_byte(dev,0x83,&c); - c |= 0x80; - pci_write_config_byte(dev, 0x83, c); + node = (struct device_node *)hose->arch_data; + of_address_to_resource(node, 0, &rsrc); - pci_write_config_byte(dev, 0x09, 0x01); - pci_write_config_byte(dev, 0x0a, 0x06); - - pci_read_config_byte(dev,0x83,&c); - c &= 0x7f; - pci_write_config_byte(dev, 0x83, c); - - pci_read_config_byte(dev,0x84,&c); - c |= 0x01; - pci_write_config_byte(dev, 0x84, c); -} - -static void __devinit quirk_uli5229(struct pci_dev *dev) -{ - unsigned short temp; - pci_write_config_word(dev, 0x04, 0x0405); - dev->class &= ~0x5; - pci_read_config_word(dev, 0x4a, &temp); - temp |= 0x1000; - pci_write_config_word(dev, 0x4a, temp); -} + if ((rsrc.start & 0xfffff) == 0x8000) { + return uli_exclude_device(hose, bus, devfn); + } -static void __devinit early_uli5249(struct pci_dev *dev) -{ - unsigned char temp; - pci_write_config_word(dev, 0x04, 0x0007); - pci_read_config_byte(dev, 0x7c, &temp); - pci_write_config_byte(dev, 0x7c, 0x80); - pci_write_config_byte(dev, 0x09, 0x01); - pci_write_config_byte(dev, 0x7c, temp); - dev->class |= 0x1; + return PCIBIOS_SUCCESSFUL; } - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); #endif /* CONFIG_PCI */ @@ -353,6 +158,9 @@ mpc86xx_hpcn_setup_arch(void) else fsl_add_bridge(np, 0); } + uses_fsl_uli_m1575 = 1; + ppc_md.pci_exclude_device = mpc86xx_exclude_device; + #endif printk("MPC86xx HPCN board from Freescale Semiconductor\n"); diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 2c937fb207f..041df77ec11 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -283,4 +283,12 @@ config AXON_RAM minor numbers are available in /proc/devices, /proc/partitions or in /sys/block/axonram?/dev. +config FSL_ULI1575 + bool + default n + help + Supports for the ULI1575 PCIe south bridge that exists on some + Freescale reference boards. The boards all use the ULI in pretty + much the same way. + endmenu diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index d6e041a46d2..d44e832b01f 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -1,3 +1,6 @@ + +obj-$(CONFIG_FSL_ULI1575) += fsl_uli1575.o + ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_PMAC) += powermac/ else diff --git a/arch/powerpc/platforms/cell/cbe_regs.h b/arch/powerpc/platforms/cell/cbe_regs.h index 17d59714487..b24025f2ac7 100644 --- a/arch/powerpc/platforms/cell/cbe_regs.h +++ b/arch/powerpc/platforms/cell/cbe_regs.h @@ -113,10 +113,14 @@ struct cbe_pmd_regs { u64 checkstop_fir; /* 0x0c00 */ u64 recoverable_fir; /* 0x0c08 */ u64 spec_att_mchk_fir; /* 0x0c10 */ - u64 fir_mode_reg; /* 0x0c18 */ + u32 fir_mode_reg; /* 0x0c18 */ + u8 pad_0x0c1c_0x0c20 [4]; /* 0x0c1c */ +#define CBE_PMD_FIR_MODE_M8 0x00800 u64 fir_enable_mask; /* 0x0c20 */ - u8 pad_0x0c28_0x1000 [0x1000 - 0x0c28]; /* 0x0c28 */ + u8 pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28]; /* 0x0c28 */ + u64 ras_esc_0; /* 0x0ca8 */ + u8 pad_0x0cb0_0x1000 [0x1000 - 0x0cb0]; /* 0x0cb0 */ }; extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np); diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c index e4132f8f51b..fb5eda48467 100644 --- a/arch/powerpc/platforms/cell/cbe_thermal.c +++ b/arch/powerpc/platforms/cell/cbe_thermal.c @@ -88,17 +88,13 @@ static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev) /* returns the value for a given spu in a given register */ static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iomem *reg) { - const unsigned int *id; union spe_reg value; struct spu *spu; - /* getting the id from the reg attribute will not work on future device-tree layouts - * in future we should store the id to the spu struct and use it here */ spu = container_of(sysdev, struct spu, sysdev); - id = of_get_property(spu_devnode(spu), "reg", NULL); value.val = in_be64(®->val); - return value.spe[*id]; + return value.spe[spu->spe_id]; } static ssize_t spu_show_temp(struct sys_device *sysdev, char *buf) diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c index 812bf563ed6..4ede22d363f 100644 --- a/arch/powerpc/platforms/cell/pervasive.c +++ b/arch/powerpc/platforms/cell/pervasive.c @@ -38,6 +38,8 @@ #include "pervasive.h" #include "cbe_regs.h" +static int sysreset_hack; + static void cbe_power_save(void) { unsigned long ctrl, thread_switch_control; @@ -85,6 +87,9 @@ static void cbe_power_save(void) static int cbe_system_reset_exception(struct pt_regs *regs) { + int cpu; + struct cbe_pmd_regs __iomem *pmd; + switch (regs->msr & SRR1_WAKEMASK) { case SRR1_WAKEEE: do_IRQ(regs); @@ -93,6 +98,18 @@ static int cbe_system_reset_exception(struct pt_regs *regs) timer_interrupt(regs); break; case SRR1_WAKEMT: + /* + * The BMC can inject user triggered system reset exceptions, + * but cannot set the system reset reason in srr1, + * so check an extra register here. + */ + if (sysreset_hack && (cpu = smp_processor_id()) == 0) { + pmd = cbe_get_cpu_pmd_regs(cpu); + if (in_be64(&pmd->ras_esc_0) & 0xffff) { + out_be64(&pmd->ras_esc_0, 0); + return 0; + } + } break; #ifdef CONFIG_CBE_RAS case SRR1_WAKESYSERR: @@ -113,9 +130,12 @@ static int cbe_system_reset_exception(struct pt_regs *regs) void __init cbe_pervasive_init(void) { int cpu; + if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO)) return; + sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0"); + for_each_possible_cpu(cpu) { struct cbe_pmd_regs __iomem *regs = cbe_get_cpu_pmd_regs(cpu); if (!regs) @@ -124,6 +144,12 @@ void __init cbe_pervasive_init(void) /* Enable Pause(0) control bit */ out_be64(®s->pmcr, in_be64(®s->pmcr) | CBE_PMD_PAUSE_ZERO_CONTROL); + + /* Enable JTAG system-reset hack */ + if (sysreset_hack) + out_be32(®s->fir_mode_reg, + in_be32(®s->fir_mode_reg) | + CBE_PMD_FIR_MODE_M8); } ppc_md.power_save = cbe_power_save; diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c index 5eb88346181..7c0668a9dcc 100644 --- a/arch/powerpc/platforms/cell/spu_manage.c +++ b/arch/powerpc/platforms/cell/spu_manage.c @@ -48,7 +48,7 @@ static u64 __init find_spu_unit_number(struct device_node *spe) { const unsigned int *prop; int proplen; - prop = of_get_property(spe, "unit-id", &proplen); + prop = of_get_property(spe, "physical-id", &proplen); if (proplen == 4) return (u64)*prop; diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c new file mode 100644 index 00000000000..afc9141be63 --- /dev/null +++ b/arch/powerpc/platforms/fsl_uli1575.c @@ -0,0 +1,255 @@ +/* + * ULI M1575 setup code - specific to Freescale boards + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/mc146818rtc.h> + +#include <asm/system.h> +#include <asm/pci-bridge.h> + +#define ULI_PIRQA 0x08 +#define ULI_PIRQB 0x09 +#define ULI_PIRQC 0x0a +#define ULI_PIRQD 0x0b +#define ULI_PIRQE 0x0c +#define ULI_PIRQF 0x0d +#define ULI_PIRQG 0x0e + +#define ULI_8259_NONE 0x00 +#define ULI_8259_IRQ1 0x08 +#define ULI_8259_IRQ3 0x02 +#define ULI_8259_IRQ4 0x04 +#define ULI_8259_IRQ5 0x05 +#define ULI_8259_IRQ6 0x07 +#define ULI_8259_IRQ7 0x06 +#define ULI_8259_IRQ9 0x01 +#define ULI_8259_IRQ10 0x03 +#define ULI_8259_IRQ11 0x09 +#define ULI_8259_IRQ12 0x0b +#define ULI_8259_IRQ14 0x0d +#define ULI_8259_IRQ15 0x0f + +u8 uli_pirq_to_irq[8] = { + ULI_8259_IRQ9, /* PIRQA */ + ULI_8259_IRQ10, /* PIRQB */ + ULI_8259_IRQ11, /* PIRQC */ + ULI_8259_IRQ12, /* PIRQD */ + ULI_8259_IRQ5, /* PIRQE */ + ULI_8259_IRQ6, /* PIRQF */ + ULI_8259_IRQ7, /* PIRQG */ + ULI_8259_NONE, /* PIRQH */ +}; + +/* set in board code if you want this quirks to do something */ +int uses_fsl_uli_m1575; + +/* Bridge */ +static void __devinit early_uli5249(struct pci_dev *dev) +{ + unsigned char temp; + + if (!uses_fsl_uli_m1575) + return; + + pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO | + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + + /* read/write lock */ + pci_read_config_byte(dev, 0x7c, &temp); + pci_write_config_byte(dev, 0x7c, 0x80); + + /* set as P2P bridge */ + pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01); + dev->class |= 0x1; + + /* restore lock */ + pci_write_config_byte(dev, 0x7c, temp); +} + + +static void __devinit quirk_uli1575(struct pci_dev *dev) +{ + int i; + + if (!uses_fsl_uli_m1575) + return; + + /* + * ULI1575 interrupts route setup + */ + + /* ULI1575 IRQ mapping conf register maps PIRQx to IRQn */ + for (i = 0; i < 4; i++) { + u8 val = uli_pirq_to_irq[i*2] | (uli_pirq_to_irq[i*2+1] << 4); + pci_write_config_byte(dev, 0x48 + i, val); + } + + /* USB 1.1 OHCI controller 1: dev 28, func 0 - IRQ12 */ + pci_write_config_byte(dev, 0x86, ULI_PIRQD); + + /* USB 1.1 OHCI controller 2: dev 28, func 1 - IRQ9 */ + pci_write_config_byte(dev, 0x87, ULI_PIRQA); + + /* USB 1.1 OHCI controller 3: dev 28, func 2 - IRQ10 */ + pci_write_config_byte(dev, 0x88, ULI_PIRQB); + + /* Lan controller: dev 27, func 0 - IRQ6 */ + pci_write_config_byte(dev, 0x89, ULI_PIRQF); + + /* AC97 Audio controller: dev 29, func 0 - IRQ6 */ + pci_write_config_byte(dev, 0x8a, ULI_PIRQF); + + /* Modem controller: dev 29, func 1 - IRQ6 */ + pci_write_config_byte(dev, 0x8b, ULI_PIRQF); + + /* HD Audio controller: dev 29, func 2 - IRQ6 */ + pci_write_config_byte(dev, 0x8c, ULI_PIRQF); + + /* SATA controller: dev 31, func 1 - IRQ5 */ + pci_write_config_byte(dev, 0x8d, ULI_PIRQE); + + /* SMB interrupt: dev 30, func 1 - IRQ7 */ + pci_write_config_byte(dev, 0x8e, ULI_PIRQG); + + /* PMU ACPI SCI interrupt: dev 30, func 2 - IRQ7 */ + pci_write_config_byte(dev, 0x8f, ULI_PIRQG); + + /* USB 2.0 controller: dev 28, func 3 */ + pci_write_config_byte(dev, 0x74, ULI_8259_IRQ11); + + /* Primary PATA IDE IRQ: 14 + * Secondary PATA IDE IRQ: 15 + */ + pci_write_config_byte(dev, 0x44, 0x30 | ULI_8259_IRQ14); + pci_write_config_byte(dev, 0x75, ULI_8259_IRQ15); +} + +static void __devinit quirk_final_uli1575(struct pci_dev *dev) +{ + /* Set i8259 interrupt trigger + * IRQ 3: Level + * IRQ 4: Level + * IRQ 5: Level + * IRQ 6: Level + * IRQ 7: Level + * IRQ 9: Level + * IRQ 10: Level + * IRQ 11: Level + * IRQ 12: Level + * IRQ 14: Edge + * IRQ 15: Edge + */ + if (!uses_fsl_uli_m1575) + return; + + outb(0xfa, 0x4d0); + outb(0x1e, 0x4d1); + + /* setup RTC */ + CMOS_WRITE(RTC_SET, RTC_CONTROL); + CMOS_WRITE(RTC_24H, RTC_CONTROL); + + /* ensure month, date, and week alarm fields are ignored */ + CMOS_WRITE(0, RTC_VALID); + + outb_p(0x7c, 0x72); + outb_p(RTC_ALARM_DONT_CARE, 0x73); + + outb_p(0x7d, 0x72); + outb_p(RTC_ALARM_DONT_CARE, 0x73); +} + +/* SATA */ +static void __devinit quirk_uli5288(struct pci_dev *dev) +{ + unsigned char c; + unsigned int d; + + if (!uses_fsl_uli_m1575) + return; + + /* read/write lock */ + pci_read_config_byte(dev, 0x83, &c); + pci_write_config_byte(dev, 0x83, c|0x80); + + pci_read_config_dword(dev, PCI_CLASS_REVISION, &d); + d = (d & 0xff) | (PCI_CLASS_STORAGE_SATA_AHCI << 8); + pci_write_config_dword(dev, PCI_CLASS_REVISION, d); + + /* restore lock */ + pci_write_config_byte(dev, 0x83, c); + + /* disable emulated PATA mode enabled */ + pci_read_config_byte(dev, 0x84, &c); + pci_write_config_byte(dev, 0x84, c & ~0x01); +} + +/* PATA */ +static void __devinit quirk_uli5229(struct pci_dev *dev) +{ + unsigned short temp; + + if (!uses_fsl_uli_m1575) + return; + + pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE | + PCI_COMMAND_MASTER | PCI_COMMAND_IO); + + /* Enable Native IRQ 14/15 */ + pci_read_config_word(dev, 0x4a, &temp); + pci_write_config_word(dev, 0x4a, temp | 0x1000); +} + +/* We have to do a dummy read on the P2P for the RTC to work, WTF */ +static void __devinit quirk_final_uli5249(struct pci_dev *dev) +{ + int i; + u8 *dummy; + struct pci_bus *bus = dev->bus; + + for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { + if ((bus->resource[i]) && + (bus->resource[i]->flags & IORESOURCE_MEM)) { + dummy = ioremap(bus->resource[i]->start, 0x4); + if (dummy) { + in_8(dummy); + iounmap(dummy); + } + break; + } + } +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575); + +int uli_exclude_device(struct pci_controller *hose, + u_char bus, u_char devfn) +{ + if (bus == (hose->first_busno + 2)) { + /* exclude Modem controller */ + if ((PCI_SLOT(devfn) == 29) && (PCI_FUNC(devfn) == 1)) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* exclude HD Audio controller */ + if ((PCI_SLOT(devfn) == 29) && (PCI_FUNC(devfn) == 2)) + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return PCIBIOS_SUCCESSFUL; +} diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c index c910ec9c2bd..6c42787fb38 100644 --- a/arch/powerpc/platforms/pasemi/iommu.c +++ b/arch/powerpc/platforms/pasemi/iommu.c @@ -93,7 +93,7 @@ static void iobmap_build(struct iommu_table *tbl, long index, pr_debug("iobmap: build at: %lx, %lx, addr: %lx\n", index, npages, uaddr); - bus_addr = (tbl->it_offset + index) << PAGE_SHIFT; + bus_addr = (tbl->it_offset + index) << IOBMAP_PAGE_SHIFT; ip = ((u32 *)tbl->it_base) + index; @@ -118,7 +118,7 @@ static void iobmap_free(struct iommu_table *tbl, long index, pr_debug("iobmap: free at: %lx, %lx\n", index, npages); - bus_addr = (tbl->it_offset + index) << PAGE_SHIFT; + bus_addr = (tbl->it_offset + index) << IOBMAP_PAGE_SHIFT; ip = ((u32 *)tbl->it_base) + index; @@ -137,7 +137,7 @@ static void iommu_table_iobmap_setup(void) iommu_table_iobmap.it_busno = 0; iommu_table_iobmap.it_offset = 0; /* it_size is in number of entries */ - iommu_table_iobmap.it_size = 0x80000000 >> PAGE_SHIFT; + iommu_table_iobmap.it_size = 0x80000000 >> IOBMAP_PAGE_SHIFT; /* Initialize the common IOMMU code */ iommu_table_iobmap.it_base = (unsigned long)iob_l2_base; diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c index 2326d5dc575..ab037a3a40d 100644 --- a/arch/powerpc/sysdev/axonram.c +++ b/arch/powerpc/sysdev/axonram.c @@ -59,8 +59,7 @@ struct axon_ram_bank { struct of_device *device; struct gendisk *disk; - unsigned int irq_correctable; - unsigned int irq_uncorrectable; + unsigned int irq_id; unsigned long ph_addr; unsigned long io_addr; unsigned long size; @@ -93,16 +92,9 @@ axon_ram_irq_handler(int irq, void *dev) BUG_ON(!bank); - if (irq == bank->irq_correctable) { - dev_err(&device->dev, "Correctable memory error occured\n"); - bank->ecc_counter++; - return IRQ_HANDLED; - } else if (irq == bank->irq_uncorrectable) { - dev_err(&device->dev, "Uncorrectable memory error occured\n"); - panic("Critical ECC error on %s", device->node->full_name); - } - - return IRQ_NONE; + dev_err(&device->dev, "Correctable memory error occured\n"); + bank->ecc_counter++; + return IRQ_HANDLED; } /** @@ -259,28 +251,18 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id) blk_queue_hardsect_size(bank->disk->queue, AXON_RAM_SECTOR_SIZE); add_disk(bank->disk); - bank->irq_correctable = irq_of_parse_and_map(device->node, 0); - bank->irq_uncorrectable = irq_of_parse_and_map(device->node, 1); - if ((bank->irq_correctable <= 0) || (bank->irq_uncorrectable <= 0)) { + bank->irq_id = irq_of_parse_and_map(device->node, 0); + if (bank->irq_id == NO_IRQ) { dev_err(&device->dev, "Cannot access ECC interrupt ID\n"); rc = -EFAULT; goto failed; } - rc = request_irq(bank->irq_correctable, axon_ram_irq_handler, - AXON_RAM_IRQ_FLAGS, bank->disk->disk_name, device); - if (rc != 0) { - dev_err(&device->dev, "Cannot register ECC interrupt handler\n"); - bank->irq_correctable = bank->irq_uncorrectable = 0; - rc = -EFAULT; - goto failed; - } - - rc = request_irq(bank->irq_uncorrectable, axon_ram_irq_handler, + rc = request_irq(bank->irq_id, axon_ram_irq_handler, AXON_RAM_IRQ_FLAGS, bank->disk->disk_name, device); if (rc != 0) { dev_err(&device->dev, "Cannot register ECC interrupt handler\n"); - bank->irq_uncorrectable = 0; + bank->irq_id = NO_IRQ; rc = -EFAULT; goto failed; } @@ -296,13 +278,9 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id) failed: if (bank != NULL) { - if (bank->irq_uncorrectable > 0) - free_irq(bank->irq_uncorrectable, device); - if (bank->irq_correctable > 0) - free_irq(bank->irq_correctable, device); + if (bank->irq_id != NO_IRQ) + free_irq(bank->irq_id, device); if (bank->disk != NULL) { - if (bank->disk->queue != NULL) - blk_cleanup_queue(bank->disk->queue); if (bank->disk->major > 0) unregister_blkdev(bank->disk->major, bank->disk->disk_name); @@ -329,9 +307,7 @@ axon_ram_remove(struct of_device *device) BUG_ON(!bank || !bank->disk); device_remove_file(&device->dev, &dev_attr_ecc); - free_irq(bank->irq_uncorrectable, device); - free_irq(bank->irq_correctable, device); - blk_cleanup_queue(bank->disk->queue); + free_irq(bank->irq_id, device); unregister_blkdev(bank->disk->major, bank->disk->disk_name); del_gendisk(bank->disk); iounmap((void __iomem *) bank->io_addr); diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 9fb0ce5c717..114c90f8f56 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -251,6 +251,8 @@ DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_transpare DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_transparent); DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_transparent); diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 565f57d777f..f3abce11bea 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -22,6 +22,7 @@ #include <linux/module.h> #include <linux/device.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/phy.h> #include <linux/fsl_devices.h> #include <linux/fs_enet_pd.h> diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c index e276048b8c5..0c9ac7ee08f 100644 --- a/arch/powerpc/sysdev/rtc_cmos_setup.c +++ b/arch/powerpc/sysdev/rtc_cmos_setup.c @@ -20,14 +20,16 @@ static int __init add_rtc(void) { struct device_node *np; struct platform_device *pd; - struct resource res; + struct resource res[2]; int ret; + memset(&res, 0, sizeof(res)); + np = of_find_compatible_node(NULL, NULL, "pnpPNP,b00"); if (!np) return -ENODEV; - ret = of_address_to_resource(np, 0, &res); + ret = of_address_to_resource(np, 0, &res[0]); of_node_put(np); if (ret) return ret; @@ -36,11 +38,18 @@ static int __init add_rtc(void) * RTC_PORT(x) is hardcoded in asm/mc146818rtc.h. Verify that the * address provided by the device node matches. */ - if (res.start != RTC_PORT(0)) + if (res[0].start != RTC_PORT(0)) return -EINVAL; + /* Use a fixed interrupt value of 8 since on PPC if we are using this + * its off an i8259 which we ensure has interrupt numbers 0..15. */ + res[1].start = 8; + res[1].end = 8; + res[1].flags = IORESOURCE_IRQ; + pd = platform_device_register_simple("rtc_cmos", -1, - &res, 1); + &res[0], 2); + if (IS_ERR(pd)) return PTR_ERR(pd); diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c index ad4ca75c0f0..5245717295b 100644 --- a/arch/s390/hypfs/inode.c +++ b/arch/s390/hypfs/inode.c @@ -60,17 +60,28 @@ static void hypfs_add_dentry(struct dentry *dentry) hypfs_last_dentry = dentry; } +static inline int hypfs_positive(struct dentry *dentry) +{ + return dentry->d_inode && !d_unhashed(dentry); +} + static void hypfs_remove(struct dentry *dentry) { struct dentry *parent; parent = dentry->d_parent; - if (S_ISDIR(dentry->d_inode->i_mode)) - simple_rmdir(parent->d_inode, dentry); - else - simple_unlink(parent->d_inode, dentry); + if (!parent || !parent->d_inode) + return; + mutex_lock(&parent->d_inode->i_mutex); + if (hypfs_positive(dentry)) { + if (S_ISDIR(dentry->d_inode->i_mode)) + simple_rmdir(parent->d_inode, dentry); + else + simple_unlink(parent->d_inode, dentry); + } d_delete(dentry); dput(dentry); + mutex_unlock(&parent->d_inode->i_mutex); } static void hypfs_delete_tree(struct dentry *root) @@ -315,6 +326,7 @@ static int hypfs_fill_super(struct super_block *sb, void *data, int silent) } hypfs_update_update(sb); sb->s_root = root_dentry; + printk(KERN_INFO "hypfs: Hypervisor filesystem mounted\n"); return 0; err_tree: @@ -356,13 +368,17 @@ static struct dentry *hypfs_create_file(struct super_block *sb, qname.name = name; qname.len = strlen(name); qname.hash = full_name_hash(name, qname.len); + mutex_lock(&parent->d_inode->i_mutex); dentry = lookup_one_len(name, parent, strlen(name)); - if (IS_ERR(dentry)) - return ERR_PTR(-ENOMEM); + if (IS_ERR(dentry)) { + dentry = ERR_PTR(-ENOMEM); + goto fail; + } inode = hypfs_make_inode(sb, mode); if (!inode) { dput(dentry); - return ERR_PTR(-ENOMEM); + dentry = ERR_PTR(-ENOMEM); + goto fail; } if (mode & S_IFREG) { inode->i_fop = &hypfs_file_ops; @@ -379,6 +395,8 @@ static struct dentry *hypfs_create_file(struct super_block *sb, inode->i_private = data; d_instantiate(dentry, inode); dget(dentry); +fail: + mutex_unlock(&parent->d_inode->i_mutex); return dentry; } @@ -391,7 +409,6 @@ struct dentry *hypfs_mkdir(struct super_block *sb, struct dentry *parent, if (IS_ERR(dentry)) return dentry; hypfs_add_dentry(dentry); - parent->d_inode->i_nlink++; return dentry; } diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 3195d375bd5..56cb71007cd 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -6,7 +6,7 @@ EXTRA_AFLAGS := -traditional obj-y := bitmap.o traps.o time.o process.o base.o early.o \ setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \ - semaphore.o s390_ext.o debug.o irq.o ipl.o dis.o + semaphore.o s390_ext.o debug.o irq.o ipl.o dis.o diag.o obj-y += $(if $(CONFIG_64BIT),entry64.o,entry.o) obj-y += $(if $(CONFIG_64BIT),reipl64.o,reipl.o) diff --git a/arch/s390/kernel/diag.c b/arch/s390/kernel/diag.c new file mode 100644 index 00000000000..c032d11da8a --- /dev/null +++ b/arch/s390/kernel/diag.c @@ -0,0 +1,102 @@ +/* + * Implementation of s390 diagnose codes + * + * Copyright IBM Corp. 2007 + * Author(s): Michael Holzheu <holzheu@de.ibm.com> + */ + +#include <linux/module.h> +#include <asm/diag.h> + +/* + * Diagnose 10: Release pages + */ +void diag10(unsigned long addr) +{ + if (addr >= 0x7ff00000) + return; + asm volatile( +#ifdef CONFIG_64BIT + " sam31\n" + " diag %0,%0,0x10\n" + "0: sam64\n" +#else + " diag %0,%0,0x10\n" + "0:\n" +#endif + EX_TABLE(0b, 0b) + : : "a" (addr)); +} +EXPORT_SYMBOL(diag10); + +/* + * Diagnose 14: Input spool file manipulation + */ +int diag14(unsigned long rx, unsigned long ry1, unsigned long subcode) +{ + register unsigned long _ry1 asm("2") = ry1; + register unsigned long _ry2 asm("3") = subcode; + int rc = 0; + + asm volatile( +#ifdef CONFIG_64BIT + " sam31\n" + " diag %2,2,0x14\n" + " sam64\n" +#else + " diag %2,2,0x14\n" +#endif + " ipm %0\n" + " srl %0,28\n" + : "=d" (rc), "+d" (_ry2) + : "d" (rx), "d" (_ry1) + : "cc"); + + return rc; +} +EXPORT_SYMBOL(diag14); + +/* + * Diagnose 210: Get information about a virtual device + */ +int diag210(struct diag210 *addr) +{ + /* + * diag 210 needs its data below the 2GB border, so we + * use a static data area to be sure + */ + static struct diag210 diag210_tmp; + static DEFINE_SPINLOCK(diag210_lock); + unsigned long flags; + int ccode; + + spin_lock_irqsave(&diag210_lock, flags); + diag210_tmp = *addr; + +#ifdef CONFIG_64BIT + asm volatile( + " lhi %0,-1\n" + " sam31\n" + " diag %1,0,0x210\n" + "0: ipm %0\n" + " srl %0,28\n" + "1: sam64\n" + EX_TABLE(0b, 1b) + : "=&d" (ccode) : "a" (&diag210_tmp) : "cc", "memory"); +#else + asm volatile( + " lhi %0,-1\n" + " diag %1,0,0x210\n" + "0: ipm %0\n" + " srl %0,28\n" + "1:\n" + EX_TABLE(0b, 1b) + : "=&d" (ccode) : "a" (&diag210_tmp) : "cc", "memory"); +#endif + + *addr = diag210_tmp; + spin_unlock_irqrestore(&diag210_lock, flags); + + return ccode; +} +EXPORT_SYMBOL(diag210); diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index d3057318f2b..50d2235df73 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -577,7 +577,7 @@ static struct insn opcode_b2[] = { { "esta", 0x4a, INSTR_RRE_RR }, { "lura", 0x4b, INSTR_RRE_RR }, { "tar", 0x4c, INSTR_RRE_AR }, - { "cpya", INSTR_RRE_AA }, + { "cpya", 0x4d, INSTR_RRE_AA }, { "sar", 0x4e, INSTR_RRE_AR }, { "ear", 0x4f, INSTR_RRE_RA }, { "csp", 0x50, INSTR_RRE_RR }, diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c index 358d2bbbc48..e40373d9fbc 100644 --- a/arch/s390/kernel/kprobes.c +++ b/arch/s390/kernel/kprobes.c @@ -85,7 +85,7 @@ void __kprobes get_instruction_type(struct arch_specific_insn *ainsn) ainsn->reg = (*ainsn->insn & 0xf0) >> 4; /* save the instruction length (pop 5-5) in bytes */ - switch (*(__u8 *) (ainsn->insn) >> 4) { + switch (*(__u8 *) (ainsn->insn) >> 6) { case 0: ainsn->ilen = 2; break; diff --git a/arch/s390/kernel/s390_ksyms.c b/arch/s390/kernel/s390_ksyms.c index 90b5ef529eb..7234c737f82 100644 --- a/arch/s390/kernel/s390_ksyms.c +++ b/arch/s390/kernel/s390_ksyms.c @@ -25,7 +25,6 @@ EXPORT_SYMBOL(_oi_bitmap); EXPORT_SYMBOL(_ni_bitmap); EXPORT_SYMBOL(_zb_findmap); EXPORT_SYMBOL(_sb_findmap); -EXPORT_SYMBOL(diag10); /* * semaphore ops diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c index c5b2f4f078b..fabc50adc46 100644 --- a/arch/s390/mm/cmm.c +++ b/arch/s390/mm/cmm.c @@ -20,6 +20,7 @@ #include <asm/pgalloc.h> #include <asm/uaccess.h> +#include <asm/diag.h> static char *sender = "VMRMSVM"; module_param(sender, charp, 0400); diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 9098531a267..3a25bbf2eb0 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -42,23 +42,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((__aligned__(PAGE_SIZE))); char empty_zero_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE))); -void diag10(unsigned long addr) -{ - if (addr >= 0x7ff00000) - return; - asm volatile( -#ifdef CONFIG_64BIT - " sam31\n" - " diag %0,%0,0x10\n" - "0: sam64\n" -#else - " diag %0,%0,0x10\n" - "0:\n" -#endif - EX_TABLE(0b,0b) - : : "a" (addr)); -} - void show_mem(void) { int i, total = 0, reserved = 0; diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 3d211aa33cd..97ac58682d0 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -34,6 +34,8 @@ isa-y := $(isa-y)-nofpu endif endif +isa-y := $(isa-y)-up + cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,) cflags-$(CONFIG_CPU_SH2A) += $(call cc-option,-m2a,) \ $(call cc-option,-m2a-nofpu,) @@ -46,7 +48,20 @@ cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a,) \ cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml -cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) -ffreestanding +# +# -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that +# support it, while -Wa,-dsp by itself limits the range of usable opcodes +# on certain CPU subtypes. Try the ISA variant first, and if that fails, +# fall back on -Wa,-dsp for the old binutils versions. Even without DSP +# opcodes, we always want the best ISA tuning the version of binutils +# will provide. +# +isaflags-y := $(call as-option,-Wa$(comma)-isa=$(isa-y),) + +isaflags-$(CONFIG_SH_DSP) := \ + $(call as-option,-Wa$(comma)-isa=$(isa-y),-Wa$(comma)-dsp) + +cflags-y += $(isaflags-y) -ffreestanding cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \ $(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g') diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c index 6e4e9654135..dab193293f2 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c @@ -41,3 +41,8 @@ static int __init sh4202_devices_setup(void) ARRAY_SIZE(sh4202_devices)); } __initcall(sh4202_devices_setup); + +void __init plat_irq_setup(void) +{ + /* do nothing - all IRL interrupts are handled by the board code */ +} diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 9833493d886..80b637c3020 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -76,7 +76,7 @@ static void scif_sercon_putc(int c) sci_in(&scif_port, SCxSR); sci_out(&scif_port, SCxSR, 0xf3 & ~(0x20 | 0x40)); - while ((sci_in(&scif_port, SCxSR) & 0x40) == 0); + while ((sci_in(&scif_port, SCxSR) & 0x40) == 0) ; if (c == '\n') diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c index 23c5948f012..129b2cfd18a 100644 --- a/arch/sh/kernel/machvec.c +++ b/arch/sh/kernel/machvec.c @@ -91,6 +91,13 @@ void __init sh_mv_setup(void) (unsigned long)&__machvec_start); /* + * Sanity check for machvec section alignment. Ensure + * __initmv hasn't been misused. + */ + if (machvec_size % sizeof(struct sh_machine_vector)) + panic("machvec misaligned, invalid __initmv use?"); + + /* * If the machvec hasn't been preselected, use the first * vector (usually the only one) from .machvec.init. */ diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c index 891d1d46c90..f64a2d2416d 100644 --- a/arch/sh/kernel/ptrace.c +++ b/arch/sh/kernel/ptrace.c @@ -93,6 +93,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case PTRACE_PEEKTEXT: /* read word at location addr. */ case PTRACE_PEEKDATA: ret = generic_ptrace_peekdata(child, addr, data); + break; /* read the word at location addr in the USER area. */ case PTRACE_PEEKUSR: { diff --git a/arch/sh64/kernel/setup.c b/arch/sh64/kernel/setup.c index 53e9d20a874..2b7264c0c6f 100644 --- a/arch/sh64/kernel/setup.c +++ b/arch/sh64/kernel/setup.c @@ -59,10 +59,6 @@ #include <asm/setup.h> #include <asm/smp.h> -#ifdef CONFIG_VT -#include <linux/console.h> -#endif - struct screen_info screen_info; #ifdef CONFIG_BLK_DEV_RAM diff --git a/arch/sh64/kernel/signal.c b/arch/sh64/kernel/signal.c index 0bb4a8f9427..79fc48cf54c 100644 --- a/arch/sh64/kernel/signal.c +++ b/arch/sh64/kernel/signal.c @@ -25,7 +25,6 @@ #include <linux/ptrace.h> #include <linux/unistd.h> #include <linux/stddef.h> -#include <linux/personality.h> #include <asm/ucontext.h> #include <asm/uaccess.h> #include <asm/pgtable.h> diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c index ac352eb6dff..e2d02fd13f3 100644 --- a/arch/sparc/kernel/ebus.c +++ b/arch/sparc/kernel/ebus.c @@ -238,6 +238,7 @@ void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_device *d sd = &dev->ofdev.dev.archdata; sd->prom_node = dp; sd->op = &dev->ofdev; + sd->iommu = dev->bus->ofdev.dev.parent->archdata.iommu; dev->ofdev.node = dp; dev->ofdev.dev.parent = &dev->bus->ofdev.dev; diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile index 9ddc5b9ce3b..76effdbea07 100644 --- a/arch/sparc/lib/Makefile +++ b/arch/sparc/lib/Makefile @@ -8,6 +8,7 @@ lib-y := mul.o rem.o sdiv.o udiv.o umul.o urem.o ashrdi3.o memcpy.o memset.o \ strlen.o checksum.o blockops.o memscan.o memcmp.o strncmp.o \ strncpy_from_user.o divdi3.o udivdi3.o strlen_user.o \ copy_user.o locks.o atomic.o \ - lshrdi3.o ashldi3.o rwsem.o muldi3.o bitext.o + lshrdi3.o ashldi3.o rwsem.o muldi3.o bitext.o \ + cmpdi2.o obj-y += iomap.o atomic32.o diff --git a/arch/sparc/lib/cmpdi2.c b/arch/sparc/lib/cmpdi2.c new file mode 100644 index 00000000000..8c1306437ed --- /dev/null +++ b/arch/sparc/lib/cmpdi2.c @@ -0,0 +1,27 @@ +#include <linux/module.h> + +#include "libgcc.h" + +word_type __cmpdi2(long long a, long long b) +{ + const DWunion au = { + .ll = a + }; + const DWunion bu = { + .ll = b + }; + + if (au.s.high < bu.s.high) + return 0; + else if (au.s.high > bu.s.high) + return 2; + + if ((unsigned int) au.s.low < (unsigned int) bu.s.low) + return 0; + else if ((unsigned int) au.s.low > (unsigned int) bu.s.low) + return 2; + + return 1; +} + +EXPORT_SYMBOL(__cmpdi2); diff --git a/arch/sparc/lib/libgcc.h b/arch/sparc/lib/libgcc.h new file mode 100644 index 00000000000..b84fd797f3e --- /dev/null +++ b/arch/sparc/lib/libgcc.h @@ -0,0 +1,18 @@ +#ifndef __ASM_LIBGCC_H +#define __ASM_LIBGCC_H + +#include <asm/byteorder.h> + +typedef int word_type __attribute__ ((mode (__word__))); + +struct DWstruct { + int high, low; +}; + +typedef union +{ + struct DWstruct s; + long long ll; +} DWunion; + +#endif /* __ASM_LIBGCC_H */ diff --git a/arch/sparc/mm/io-unit.c b/arch/sparc/mm/io-unit.c index 4ccda77d08d..7c89893b1fe 100644 --- a/arch/sparc/mm/io-unit.c +++ b/arch/sparc/mm/io-unit.c @@ -66,7 +66,7 @@ iounit_init(int sbi_node, int io_node, struct sbus_bus *sbus) } if(!xpt) panic("Cannot map External Page Table."); - sbus->iommu = (struct iommu_struct *)iounit; + sbus->ofdev.dev.archdata.iommu = iounit; iounit->page_table = xpt; spin_lock_init(&iounit->lock); @@ -127,7 +127,7 @@ nexti: scan = find_next_zero_bit(iounit->bmap, limit, scan); static __u32 iounit_get_scsi_one(char *vaddr, unsigned long len, struct sbus_bus *sbus) { unsigned long ret, flags; - struct iounit_struct *iounit = (struct iounit_struct *)sbus->iommu; + struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu; spin_lock_irqsave(&iounit->lock, flags); ret = iounit_get_area(iounit, (unsigned long)vaddr, len); @@ -138,7 +138,7 @@ static __u32 iounit_get_scsi_one(char *vaddr, unsigned long len, struct sbus_bus static void iounit_get_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus *sbus) { unsigned long flags; - struct iounit_struct *iounit = (struct iounit_struct *)sbus->iommu; + struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu; /* FIXME: Cache some resolved pages - often several sg entries are to the same page */ spin_lock_irqsave(&iounit->lock, flags); @@ -153,7 +153,7 @@ static void iounit_get_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus static void iounit_release_scsi_one(__u32 vaddr, unsigned long len, struct sbus_bus *sbus) { unsigned long flags; - struct iounit_struct *iounit = (struct iounit_struct *)sbus->iommu; + struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu; spin_lock_irqsave(&iounit->lock, flags); len = ((vaddr & ~PAGE_MASK) + len + (PAGE_SIZE-1)) >> PAGE_SHIFT; @@ -168,7 +168,7 @@ static void iounit_release_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_ { unsigned long flags; unsigned long vaddr, len; - struct iounit_struct *iounit = (struct iounit_struct *)sbus->iommu; + struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu; spin_lock_irqsave(&iounit->lock, flags); while (sz != 0) { @@ -211,7 +211,7 @@ static int iounit_map_dma_area(dma_addr_t *pba, unsigned long va, __u32 addr, in i = ((addr - IOUNIT_DMA_BASE) >> PAGE_SHIFT); for_each_sbus(sbus) { - struct iounit_struct *iounit = (struct iounit_struct *)sbus->iommu; + struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu; iopte = (iopte_t *)(iounit->page_table + i); *iopte = MKIOPTE(__pa(page)); @@ -235,7 +235,7 @@ static void iounit_unmap_dma_area(unsigned long addr, int len) static struct page *iounit_translate_dvma(unsigned long addr) { struct sbus_bus *sbus = sbus_root; /* They are all the same */ - struct iounit_struct *iounit = (struct iounit_struct *)sbus->iommu; + struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu; int i; iopte_t *iopte; @@ -279,7 +279,7 @@ __u32 iounit_map_dma_init(struct sbus_bus *sbus, int size) unsigned long rotor, scan, limit; unsigned long flags; __u32 ret; - struct iounit_struct *iounit = (struct iounit_struct *)sbus->iommu; + struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu; npages = (size + (PAGE_SIZE-1)) >> PAGE_SHIFT; i = 0x0213; @@ -315,7 +315,7 @@ nexti: scan = find_next_zero_bit(iounit->bmap, limit, scan); __u32 iounit_map_dma_page(__u32 vaddr, void *addr, struct sbus_bus *sbus) { int scan = (vaddr - IOUNIT_DMA_BASE) >> PAGE_SHIFT; - struct iounit_struct *iounit = (struct iounit_struct *)sbus->iommu; + struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu; iounit->page_table[scan] = MKIOPTE(__pa(((unsigned long)addr) & PAGE_MASK)); return vaddr + (((unsigned long)addr) & ~PAGE_MASK); diff --git a/arch/sparc/mm/iommu.c b/arch/sparc/mm/iommu.c index be042efd1ba..52e907af9d2 100644 --- a/arch/sparc/mm/iommu.c +++ b/arch/sparc/mm/iommu.c @@ -132,7 +132,7 @@ iommu_init(int iommund, struct sbus_bus *sbus) impl, vers, iommu->page_table, (int)(IOMMU_NPTES*sizeof(iopte_t)), (int)IOMMU_NPTES); - sbus->iommu = iommu; + sbus->ofdev.dev.archdata.iommu = iommu; } /* This begs to be btfixup-ed by srmmu. */ @@ -166,7 +166,7 @@ static void iommu_flush_iotlb(iopte_t *iopte, unsigned int niopte) static u32 iommu_get_one(struct page *page, int npages, struct sbus_bus *sbus) { - struct iommu_struct *iommu = sbus->iommu; + struct iommu_struct *iommu = sbus->ofdev.dev.archdata.iommu; int ioptex; iopte_t *iopte, *iopte0; unsigned int busa, busa0; @@ -291,7 +291,7 @@ static void iommu_get_scsi_sgl_pflush(struct scatterlist *sg, int sz, struct sbu static void iommu_release_one(u32 busa, int npages, struct sbus_bus *sbus) { - struct iommu_struct *iommu = sbus->iommu; + struct iommu_struct *iommu = sbus->ofdev.dev.archdata.iommu; int ioptex; int i; @@ -334,7 +334,7 @@ static int iommu_map_dma_area(dma_addr_t *pba, unsigned long va, unsigned long addr, int len) { unsigned long page, end; - struct iommu_struct *iommu = sbus_root->iommu; + struct iommu_struct *iommu = sbus_root->ofdev.dev.archdata.iommu; iopte_t *iopte = iommu->page_table; iopte_t *first; int ioptex; @@ -399,7 +399,7 @@ static int iommu_map_dma_area(dma_addr_t *pba, unsigned long va, static void iommu_unmap_dma_area(unsigned long busa, int len) { - struct iommu_struct *iommu = sbus_root->iommu; + struct iommu_struct *iommu = sbus_root->ofdev.dev.archdata.iommu; iopte_t *iopte = iommu->page_table; unsigned long end; int ioptex = (busa - iommu->start) >> PAGE_SHIFT; @@ -420,7 +420,7 @@ static void iommu_unmap_dma_area(unsigned long busa, int len) static struct page *iommu_translate_dvma(unsigned long busa) { - struct iommu_struct *iommu = sbus_root->iommu; + struct iommu_struct *iommu = sbus_root->ofdev.dev.archdata.iommu; iopte_t *iopte = iommu->page_table; iopte += ((busa - iommu->start) >> PAGE_SHIFT); diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c index 79d60d86f6f..005a3e72d4f 100644 --- a/arch/sparc/mm/sun4c.c +++ b/arch/sparc/mm/sun4c.c @@ -268,7 +268,6 @@ static inline void sun4c_init_clean_mmu(unsigned long kernel_end) unsigned char savectx, ctx; savectx = sun4c_get_context(); - kernel_end = SUN4C_REAL_PGDIR_ALIGN(kernel_end); for (ctx = 0; ctx < num_contexts; ctx++) { sun4c_set_context(ctx); for (vaddr = 0; vaddr < 0x20000000; vaddr += SUN4C_REAL_PGDIR_SIZE) @@ -2064,7 +2063,6 @@ void __init sun4c_paging_init(void) unsigned long end_pfn, pages_avail; kernel_end = (unsigned long) &end; - kernel_end += (SUN4C_REAL_PGDIR_SIZE * 4); kernel_end = SUN4C_REAL_PGDIR_ALIGN(kernel_end); pages_avail = 0; diff --git a/arch/sparc/prom/console.c b/arch/sparc/prom/console.c index 8d1cfb0d506..2a007a78441 100644 --- a/arch/sparc/prom/console.c +++ b/arch/sparc/prom/console.c @@ -17,9 +17,6 @@ extern void restore_current(void); -static char con_name_jmc[] = "/obio/su@"; /* "/obio/su@0,3002f8"; */ -#define CON_SIZE_JMC (sizeof(con_name_jmc)) - /* Non blocking get character from console input device, returns -1 * if no input was taken. This can be used for polling. */ diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index ac18bd8e273..63144ad476f 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -501,7 +501,7 @@ niagara_tlb_fixup: cmp %g1, SUN4V_CHIP_NIAGARA1 be,pt %xcc, niagara_patch cmp %g1, SUN4V_CHIP_NIAGARA2 - be,pt %xcc, niagara_patch + be,pt %xcc, niagara2_patch nop call generic_patch_copyops @@ -512,6 +512,15 @@ niagara_tlb_fixup: nop ba,a,pt %xcc, 80f +niagara2_patch: + call niagara2_patch_copyops + nop + call niagara_patch_bzero + nop + call niagara2_patch_pageops + nop + + ba,a,pt %xcc, 80f niagara_patch: call niagara_patch_copyops @@ -706,12 +715,13 @@ setup_trap_table: membar #Sync + BRANCH_IF_SUN4V(o2, 1f) + /* Kill PROM timer */ sethi %hi(0x80000000), %o2 sllx %o2, 32, %o2 wr %o2, 0, %tick_cmpr - BRANCH_IF_SUN4V(o2, 1f) BRANCH_IF_ANY_CHEETAH(o2, o3, 1f) ba,pt %xcc, 2f diff --git a/arch/sparc64/kernel/mdesc.c b/arch/sparc64/kernel/mdesc.c index 95059c2ec41..9f22e4ff601 100644 --- a/arch/sparc64/kernel/mdesc.c +++ b/arch/sparc64/kernel/mdesc.c @@ -9,6 +9,7 @@ #include <linux/list.h> #include <linux/slab.h> #include <linux/mm.h> +#include <linux/miscdevice.h> #include <asm/hypervisor.h> #include <asm/mdesc.h> @@ -836,6 +837,43 @@ void __devinit mdesc_fill_in_cpu_data(cpumask_t mask) mdesc_release(hp); } +static ssize_t mdesc_read(struct file *file, char __user *buf, + size_t len, loff_t *offp) +{ + struct mdesc_handle *hp = mdesc_grab(); + int err; + + if (!hp) + return -ENODEV; + + err = hp->handle_size; + if (len < hp->handle_size) + err = -EMSGSIZE; + else if (copy_to_user(buf, &hp->mdesc, hp->handle_size)) + err = -EFAULT; + mdesc_release(hp); + + return err; +} + +static const struct file_operations mdesc_fops = { + .read = mdesc_read, + .owner = THIS_MODULE, +}; + +static struct miscdevice mdesc_misc = { + .minor = MISC_DYNAMIC_MINOR, + .name = "mdesc", + .fops = &mdesc_fops, +}; + +static int __init mdesc_misc_init(void) +{ + return misc_register(&mdesc_misc); +} + +__initcall(mdesc_misc_init); + void __init sun4v_mdesc_init(void) { struct mdesc_handle *hp; diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S index 9448595f906..9533a25ce5d 100644 --- a/arch/sparc64/kernel/trampoline.S +++ b/arch/sparc64/kernel/trampoline.S @@ -95,14 +95,13 @@ spitfire_startup: membar #Sync startup_continue: + mov %o0, %l0 + BRANCH_IF_SUN4V(g1, niagara_lock_tlb) + sethi %hi(0x80000000), %g2 sllx %g2, 32, %g2 wr %g2, 0, %tick_cmpr - mov %o0, %l0 - - BRANCH_IF_SUN4V(g1, niagara_lock_tlb) - /* Call OBP by hand to lock KERNBASE into i/d tlbs. * We lock 2 consequetive entries if we are 'bigkernel'. */ diff --git a/arch/sparc64/lib/Makefile b/arch/sparc64/lib/Makefile index f95fbfa3eeb..f095e13910b 100644 --- a/arch/sparc64/lib/Makefile +++ b/arch/sparc64/lib/Makefile @@ -13,6 +13,8 @@ lib-y := PeeCeeI.o copy_page.o clear_page.o strlen.o strncmp.o \ U3memcpy.o U3copy_from_user.o U3copy_to_user.o U3patch.o \ NGmemcpy.o NGcopy_from_user.o NGcopy_to_user.o NGpatch.o \ NGpage.o NGbzero.o \ + NG2memcpy.o NG2copy_from_user.o NG2copy_to_user.o NG2patch.o \ + NG2page.o \ GENmemcpy.o GENcopy_from_user.o GENcopy_to_user.o GENpatch.o \ GENpage.o GENbzero.o \ copy_in_user.o user_fixup.o memmove.o \ diff --git a/arch/sparc64/lib/NG2copy_from_user.S b/arch/sparc64/lib/NG2copy_from_user.S new file mode 100644 index 00000000000..c77ef5f2210 --- /dev/null +++ b/arch/sparc64/lib/NG2copy_from_user.S @@ -0,0 +1,40 @@ +/* NG2copy_from_user.S: Niagara-2 optimized copy from userspace. + * + * Copyright (C) 2007 David S. Miller (davem@davemloft.net) + */ + +#define EX_LD(x) \ +98: x; \ + .section .fixup; \ + .align 4; \ +99: wr %g0, ASI_AIUS, %asi;\ + retl; \ + mov 1, %o0; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, 99b; \ + .text; \ + .align 4; + +#ifndef ASI_AIUS +#define ASI_AIUS 0x11 +#endif + +#ifndef ASI_BLK_AIUS_4V +#define ASI_BLK_AIUS_4V 0x17 +#endif + +#define FUNC_NAME NG2copy_from_user +#define LOAD(type,addr,dest) type##a [addr] %asi, dest +#define LOAD_BLK(addr,dest) ldda [addr] ASI_BLK_AIUS_4V, dest +#define EX_RETVAL(x) 0 + +#ifdef __KERNEL__ +#define PREAMBLE \ + rd %asi, %g1; \ + cmp %g1, ASI_AIUS; \ + bne,pn %icc, memcpy_user_stub; \ + nop +#endif + +#include "NG2memcpy.S" diff --git a/arch/sparc64/lib/NG2copy_to_user.S b/arch/sparc64/lib/NG2copy_to_user.S new file mode 100644 index 00000000000..4bd4093acbb --- /dev/null +++ b/arch/sparc64/lib/NG2copy_to_user.S @@ -0,0 +1,49 @@ +/* NG2copy_to_user.S: Niagara-2 optimized copy to userspace. + * + * Copyright (C) 2007 David S. Miller (davem@davemloft.net) + */ + +#define EX_ST(x) \ +98: x; \ + .section .fixup; \ + .align 4; \ +99: wr %g0, ASI_AIUS, %asi;\ + retl; \ + mov 1, %o0; \ + .section __ex_table,"a";\ + .align 4; \ + .word 98b, 99b; \ + .text; \ + .align 4; + +#ifndef ASI_AIUS +#define ASI_AIUS 0x11 +#endif + +#ifndef ASI_BLK_AIUS_4V +#define ASI_BLK_AIUS_4V 0x17 +#endif + +#ifndef ASI_BLK_INIT_QUAD_LDD_AIUS +#define ASI_BLK_INIT_QUAD_LDD_AIUS 0x23 +#endif + +#define FUNC_NAME NG2copy_to_user +#define STORE(type,src,addr) type##a src, [addr] ASI_AIUS +#define STORE_ASI ASI_BLK_INIT_QUAD_LDD_AIUS +#define STORE_BLK(src,addr) stda src, [addr] ASI_BLK_AIUS_4V +#define EX_RETVAL(x) 0 + +#ifdef __KERNEL__ + /* Writing to %asi is _expensive_ so we hardcode it. + * Reading %asi to check for KERNEL_DS is comparatively + * cheap. + */ +#define PREAMBLE \ + rd %asi, %g1; \ + cmp %g1, ASI_AIUS; \ + bne,pn %icc, memcpy_user_stub; \ + nop +#endif + +#include "NG2memcpy.S" diff --git a/arch/sparc64/lib/NG2memcpy.S b/arch/sparc64/lib/NG2memcpy.S new file mode 100644 index 00000000000..0aed75653b5 --- /dev/null +++ b/arch/sparc64/lib/NG2memcpy.S @@ -0,0 +1,520 @@ +/* NG2memcpy.S: Niagara-2 optimized memcpy. + * + * Copyright (C) 2007 David S. Miller (davem@davemloft.net) + */ + +#ifdef __KERNEL__ +#include <asm/visasm.h> +#include <asm/asi.h> +#define GLOBAL_SPARE %g7 +#else +#define ASI_PNF 0x82 +#define ASI_BLK_P 0xf0 +#define ASI_BLK_INIT_QUAD_LDD_P 0xe2 +#define FPRS_FEF 0x04 +#ifdef MEMCPY_DEBUG +#define VISEntryHalf rd %fprs, %o5; wr %g0, FPRS_FEF, %fprs; \ + clr %g1; clr %g2; clr %g3; subcc %g0, %g0, %g0; +#define VISExitHalf and %o5, FPRS_FEF, %o5; wr %o5, 0x0, %fprs +#else +#define VISEntryHalf rd %fprs, %o5; wr %g0, FPRS_FEF, %fprs +#define VISExitHalf and %o5, FPRS_FEF, %o5; wr %o5, 0x0, %fprs +#endif +#define GLOBAL_SPARE %g5 +#endif + +#ifndef STORE_ASI +#ifndef SIMULATE_NIAGARA_ON_NON_NIAGARA +#define STORE_ASI ASI_BLK_INIT_QUAD_LDD_P +#else +#define STORE_ASI 0x80 /* ASI_P */ +#endif +#endif + +#ifndef EX_LD +#define EX_LD(x) x +#endif + +#ifndef EX_ST +#define EX_ST(x) x +#endif + +#ifndef EX_RETVAL +#define EX_RETVAL(x) x +#endif + +#ifndef LOAD +#define LOAD(type,addr,dest) type [addr], dest +#endif + +#ifndef LOAD_BLK +#define LOAD_BLK(addr,dest) ldda [addr] ASI_BLK_P, dest +#endif + +#ifndef STORE +#ifndef MEMCPY_DEBUG +#define STORE(type,src,addr) type src, [addr] +#else +#define STORE(type,src,addr) type##a src, [addr] 0x80 +#endif +#endif + +#ifndef STORE_BLK +#define STORE_BLK(src,addr) stda src, [addr] ASI_BLK_P +#endif + +#ifndef STORE_INIT +#define STORE_INIT(src,addr) stxa src, [addr] STORE_ASI +#endif + +#ifndef FUNC_NAME +#define FUNC_NAME NG2memcpy +#endif + +#ifndef PREAMBLE +#define PREAMBLE +#endif + +#ifndef XCC +#define XCC xcc +#endif + +#define FREG_FROB(x0, x1, x2, x3, x4, x5, x6, x7, x8) \ + faligndata %x0, %x1, %f0; \ + faligndata %x1, %x2, %f2; \ + faligndata %x2, %x3, %f4; \ + faligndata %x3, %x4, %f6; \ + faligndata %x4, %x5, %f8; \ + faligndata %x5, %x6, %f10; \ + faligndata %x6, %x7, %f12; \ + faligndata %x7, %x8, %f14; + +#define FREG_MOVE_1(x0) \ + fmovd %x0, %f0; +#define FREG_MOVE_2(x0, x1) \ + fmovd %x0, %f0; \ + fmovd %x1, %f2; +#define FREG_MOVE_3(x0, x1, x2) \ + fmovd %x0, %f0; \ + fmovd %x1, %f2; \ + fmovd %x2, %f4; +#define FREG_MOVE_4(x0, x1, x2, x3) \ + fmovd %x0, %f0; \ + fmovd %x1, %f2; \ + fmovd %x2, %f4; \ + fmovd %x3, %f6; +#define FREG_MOVE_5(x0, x1, x2, x3, x4) \ + fmovd %x0, %f0; \ + fmovd %x1, %f2; \ + fmovd %x2, %f4; \ + fmovd %x3, %f6; \ + fmovd %x4, %f8; +#define FREG_MOVE_6(x0, x1, x2, x3, x4, x5) \ + fmovd %x0, %f0; \ + fmovd %x1, %f2; \ + fmovd %x2, %f4; \ + fmovd %x3, %f6; \ + fmovd %x4, %f8; \ + fmovd %x5, %f10; +#define FREG_MOVE_7(x0, x1, x2, x3, x4, x5, x6) \ + fmovd %x0, %f0; \ + fmovd %x1, %f2; \ + fmovd %x2, %f4; \ + fmovd %x3, %f6; \ + fmovd %x4, %f8; \ + fmovd %x5, %f10; \ + fmovd %x6, %f12; +#define FREG_MOVE_8(x0, x1, x2, x3, x4, x5, x6, x7) \ + fmovd %x0, %f0; \ + fmovd %x1, %f2; \ + fmovd %x2, %f4; \ + fmovd %x3, %f6; \ + fmovd %x4, %f8; \ + fmovd %x5, %f10; \ + fmovd %x6, %f12; \ + fmovd %x7, %f14; +#define FREG_LOAD_1(base, x0) \ + EX_LD(LOAD(ldd, base + 0x00, %x0)) +#define FREG_LOAD_2(base, x0, x1) \ + EX_LD(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD(LOAD(ldd, base + 0x08, %x1)); +#define FREG_LOAD_3(base, x0, x1, x2) \ + EX_LD(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD(LOAD(ldd, base + 0x08, %x1)); \ + EX_LD(LOAD(ldd, base + 0x10, %x2)); +#define FREG_LOAD_4(base, x0, x1, x2, x3) \ + EX_LD(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD(LOAD(ldd, base + 0x08, %x1)); \ + EX_LD(LOAD(ldd, base + 0x10, %x2)); \ + EX_LD(LOAD(ldd, base + 0x18, %x3)); +#define FREG_LOAD_5(base, x0, x1, x2, x3, x4) \ + EX_LD(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD(LOAD(ldd, base + 0x08, %x1)); \ + EX_LD(LOAD(ldd, base + 0x10, %x2)); \ + EX_LD(LOAD(ldd, base + 0x18, %x3)); \ + EX_LD(LOAD(ldd, base + 0x20, %x4)); +#define FREG_LOAD_6(base, x0, x1, x2, x3, x4, x5) \ + EX_LD(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD(LOAD(ldd, base + 0x08, %x1)); \ + EX_LD(LOAD(ldd, base + 0x10, %x2)); \ + EX_LD(LOAD(ldd, base + 0x18, %x3)); \ + EX_LD(LOAD(ldd, base + 0x20, %x4)); \ + EX_LD(LOAD(ldd, base + 0x28, %x5)); +#define FREG_LOAD_7(base, x0, x1, x2, x3, x4, x5, x6) \ + EX_LD(LOAD(ldd, base + 0x00, %x0)); \ + EX_LD(LOAD(ldd, base + 0x08, %x1)); \ + EX_LD(LOAD(ldd, base + 0x10, %x2)); \ + EX_LD(LOAD(ldd, base + 0x18, %x3)); \ + EX_LD(LOAD(ldd, base + 0x20, %x4)); \ + EX_LD(LOAD(ldd, base + 0x28, %x5)); \ + EX_LD(LOAD(ldd, base + 0x30, %x6)); + + .register %g2,#scratch + .register %g3,#scratch + + .text + .align 64 + + .globl FUNC_NAME + .type FUNC_NAME,#function +FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ + srlx %o2, 31, %g2 + cmp %g2, 0 + tne %xcc, 5 + PREAMBLE + mov %o0, GLOBAL_SPARE + cmp %o2, 0 + be,pn %XCC, 85f + or %o0, %o1, %o3 + cmp %o2, 16 + blu,a,pn %XCC, 80f + or %o3, %o2, %o3 + + /* 2 blocks (128 bytes) is the minimum we can do the block + * copy with. We need to ensure that we'll iterate at least + * once in the block copy loop. At worst we'll need to align + * the destination to a 64-byte boundary which can chew up + * to (64 - 1) bytes from the length before we perform the + * block copy loop. + * + * However, the cut-off point, performance wise, is around + * 4 64-byte blocks. + */ + cmp %o2, (4 * 64) + blu,pt %XCC, 75f + andcc %o3, 0x7, %g0 + + /* %o0: dst + * %o1: src + * %o2: len (known to be >= 128) + * + * The block copy loops can use %o4, %g2, %g3 as + * temporaries while copying the data. %o5 must + * be preserved between VISEntryHalf and VISExitHalf + */ + + LOAD(prefetch, %o1 + 0x000, #one_read) + LOAD(prefetch, %o1 + 0x040, #one_read) + LOAD(prefetch, %o1 + 0x080, #one_read) + + /* Align destination on 64-byte boundary. */ + andcc %o0, (64 - 1), %o4 + be,pt %XCC, 2f + sub %o4, 64, %o4 + sub %g0, %o4, %o4 ! bytes to align dst + sub %o2, %o4, %o2 +1: subcc %o4, 1, %o4 + EX_LD(LOAD(ldub, %o1, %g1)) + EX_ST(STORE(stb, %g1, %o0)) + add %o1, 1, %o1 + bne,pt %XCC, 1b + add %o0, 1, %o0 + +2: + /* Clobbers o5/g1/g2/g3/g7/icc/xcc. We must preserve + * o5 from here until we hit VISExitHalf. + */ + VISEntryHalf + + alignaddr %o1, %g0, %g0 + + add %o1, (64 - 1), %o4 + andn %o4, (64 - 1), %o4 + andn %o2, (64 - 1), %g1 + sub %o2, %g1, %o2 + + and %o1, (64 - 1), %g2 + add %o1, %g1, %o1 + sub %o0, %o4, %g3 + brz,pt %g2, 190f + cmp %g2, 32 + blu,a 5f + cmp %g2, 16 + cmp %g2, 48 + blu,a 4f + cmp %g2, 40 + cmp %g2, 56 + blu 170f + nop + ba,a,pt %xcc, 180f + +4: /* 32 <= low bits < 48 */ + blu 150f + nop + ba,a,pt %xcc, 160f +5: /* 0 < low bits < 32 */ + blu,a 6f + cmp %g2, 8 + cmp %g2, 24 + blu 130f + nop + ba,a,pt %xcc, 140f +6: /* 0 < low bits < 16 */ + bgeu 120f + nop + /* fall through for 0 < low bits < 8 */ +110: sub %o4, 64, %g2 + EX_LD(LOAD_BLK(%g2, %f0)) +1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) + EX_LD(LOAD_BLK(%o4, %f16)) + FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f14, f16) + EX_ST(STORE_BLK(%f0, %o4 + %g3)) + FREG_MOVE_8(f16, f18, f20, f22, f24, f26, f28, f30) + subcc %g1, 64, %g1 + add %o4, 64, %o4 + bne,pt %xcc, 1b + LOAD(prefetch, %o4 + 64, #one_read) + ba,pt %xcc, 195f + nop + +120: sub %o4, 56, %g2 + FREG_LOAD_7(%g2, f0, f2, f4, f6, f8, f10, f12) +1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) + EX_LD(LOAD_BLK(%o4, %f16)) + FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f16, f18) + EX_ST(STORE_BLK(%f0, %o4 + %g3)) + FREG_MOVE_7(f18, f20, f22, f24, f26, f28, f30) + subcc %g1, 64, %g1 + add %o4, 64, %o4 + bne,pt %xcc, 1b + LOAD(prefetch, %o4 + 64, #one_read) + ba,pt %xcc, 195f + nop + +130: sub %o4, 48, %g2 + FREG_LOAD_6(%g2, f0, f2, f4, f6, f8, f10) +1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) + EX_LD(LOAD_BLK(%o4, %f16)) + FREG_FROB(f0, f2, f4, f6, f8, f10, f16, f18, f20) + EX_ST(STORE_BLK(%f0, %o4 + %g3)) + FREG_MOVE_6(f20, f22, f24, f26, f28, f30) + subcc %g1, 64, %g1 + add %o4, 64, %o4 + bne,pt %xcc, 1b + LOAD(prefetch, %o4 + 64, #one_read) + ba,pt %xcc, 195f + nop + +140: sub %o4, 40, %g2 + FREG_LOAD_5(%g2, f0, f2, f4, f6, f8) +1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) + EX_LD(LOAD_BLK(%o4, %f16)) + FREG_FROB(f0, f2, f4, f6, f8, f16, f18, f20, f22) + EX_ST(STORE_BLK(%f0, %o4 + %g3)) + FREG_MOVE_5(f22, f24, f26, f28, f30) + subcc %g1, 64, %g1 + add %o4, 64, %o4 + bne,pt %xcc, 1b + LOAD(prefetch, %o4 + 64, #one_read) + ba,pt %xcc, 195f + nop + +150: sub %o4, 32, %g2 + FREG_LOAD_4(%g2, f0, f2, f4, f6) +1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) + EX_LD(LOAD_BLK(%o4, %f16)) + FREG_FROB(f0, f2, f4, f6, f16, f18, f20, f22, f24) + EX_ST(STORE_BLK(%f0, %o4 + %g3)) + FREG_MOVE_4(f24, f26, f28, f30) + subcc %g1, 64, %g1 + add %o4, 64, %o4 + bne,pt %xcc, 1b + LOAD(prefetch, %o4 + 64, #one_read) + ba,pt %xcc, 195f + nop + +160: sub %o4, 24, %g2 + FREG_LOAD_3(%g2, f0, f2, f4) +1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) + EX_LD(LOAD_BLK(%o4, %f16)) + FREG_FROB(f0, f2, f4, f16, f18, f20, f22, f24, f26) + EX_ST(STORE_BLK(%f0, %o4 + %g3)) + FREG_MOVE_3(f26, f28, f30) + subcc %g1, 64, %g1 + add %o4, 64, %o4 + bne,pt %xcc, 1b + LOAD(prefetch, %o4 + 64, #one_read) + ba,pt %xcc, 195f + nop + +170: sub %o4, 16, %g2 + FREG_LOAD_2(%g2, f0, f2) +1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) + EX_LD(LOAD_BLK(%o4, %f16)) + FREG_FROB(f0, f2, f16, f18, f20, f22, f24, f26, f28) + EX_ST(STORE_BLK(%f0, %o4 + %g3)) + FREG_MOVE_2(f28, f30) + subcc %g1, 64, %g1 + add %o4, 64, %o4 + bne,pt %xcc, 1b + LOAD(prefetch, %o4 + 64, #one_read) + ba,pt %xcc, 195f + nop + +180: sub %o4, 8, %g2 + FREG_LOAD_1(%g2, f0) +1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) + EX_LD(LOAD_BLK(%o4, %f16)) + FREG_FROB(f0, f16, f18, f20, f22, f24, f26, f28, f30) + EX_ST(STORE_BLK(%f0, %o4 + %g3)) + FREG_MOVE_1(f30) + subcc %g1, 64, %g1 + add %o4, 64, %o4 + bne,pt %xcc, 1b + LOAD(prefetch, %o4 + 64, #one_read) + ba,pt %xcc, 195f + nop + +190: +1: EX_ST(STORE_INIT(%g0, %o4 + %g3)) + subcc %g1, 64, %g1 + EX_LD(LOAD_BLK(%o4, %f0)) + EX_ST(STORE_BLK(%f0, %o4 + %g3)) + add %o4, 64, %o4 + bne,pt %xcc, 1b + LOAD(prefetch, %o4 + 64, #one_read) + +195: + add %o4, %g3, %o0 + membar #Sync + + VISExitHalf + + /* %o2 contains any final bytes still needed to be copied + * over. If anything is left, we copy it one byte at a time. + */ + brz,pt %o2, 85f + sub %o0, %o1, %o3 + ba,a,pt %XCC, 90f + + .align 64 +75: /* 16 < len <= 64 */ + bne,pn %XCC, 75f + sub %o0, %o1, %o3 + +72: + andn %o2, 0xf, %o4 + and %o2, 0xf, %o2 +1: subcc %o4, 0x10, %o4 + EX_LD(LOAD(ldx, %o1, %o5)) + add %o1, 0x08, %o1 + EX_LD(LOAD(ldx, %o1, %g1)) + sub %o1, 0x08, %o1 + EX_ST(STORE(stx, %o5, %o1 + %o3)) + add %o1, 0x8, %o1 + EX_ST(STORE(stx, %g1, %o1 + %o3)) + bgu,pt %XCC, 1b + add %o1, 0x8, %o1 +73: andcc %o2, 0x8, %g0 + be,pt %XCC, 1f + nop + sub %o2, 0x8, %o2 + EX_LD(LOAD(ldx, %o1, %o5)) + EX_ST(STORE(stx, %o5, %o1 + %o3)) + add %o1, 0x8, %o1 +1: andcc %o2, 0x4, %g0 + be,pt %XCC, 1f + nop + sub %o2, 0x4, %o2 + EX_LD(LOAD(lduw, %o1, %o5)) + EX_ST(STORE(stw, %o5, %o1 + %o3)) + add %o1, 0x4, %o1 +1: cmp %o2, 0 + be,pt %XCC, 85f + nop + ba,pt %xcc, 90f + nop + +75: + andcc %o0, 0x7, %g1 + sub %g1, 0x8, %g1 + be,pn %icc, 2f + sub %g0, %g1, %g1 + sub %o2, %g1, %o2 + +1: subcc %g1, 1, %g1 + EX_LD(LOAD(ldub, %o1, %o5)) + EX_ST(STORE(stb, %o5, %o1 + %o3)) + bgu,pt %icc, 1b + add %o1, 1, %o1 + +2: add %o1, %o3, %o0 + andcc %o1, 0x7, %g1 + bne,pt %icc, 8f + sll %g1, 3, %g1 + + cmp %o2, 16 + bgeu,pt %icc, 72b + nop + ba,a,pt %xcc, 73b + +8: mov 64, %o3 + andn %o1, 0x7, %o1 + EX_LD(LOAD(ldx, %o1, %g2)) + sub %o3, %g1, %o3 + andn %o2, 0x7, %o4 + sllx %g2, %g1, %g2 +1: add %o1, 0x8, %o1 + EX_LD(LOAD(ldx, %o1, %g3)) + subcc %o4, 0x8, %o4 + srlx %g3, %o3, %o5 + or %o5, %g2, %o5 + EX_ST(STORE(stx, %o5, %o0)) + add %o0, 0x8, %o0 + bgu,pt %icc, 1b + sllx %g3, %g1, %g2 + + srl %g1, 3, %g1 + andcc %o2, 0x7, %o2 + be,pn %icc, 85f + add %o1, %g1, %o1 + ba,pt %xcc, 90f + sub %o0, %o1, %o3 + + .align 64 +80: /* 0 < len <= 16 */ + andcc %o3, 0x3, %g0 + bne,pn %XCC, 90f + sub %o0, %o1, %o3 + +1: + subcc %o2, 4, %o2 + EX_LD(LOAD(lduw, %o1, %g1)) + EX_ST(STORE(stw, %g1, %o1 + %o3)) + bgu,pt %XCC, 1b + add %o1, 4, %o1 + +85: retl + mov EX_RETVAL(GLOBAL_SPARE), %o0 + + .align 32 +90: + subcc %o2, 1, %o2 + EX_LD(LOAD(ldub, %o1, %g1)) + EX_ST(STORE(stb, %g1, %o1 + %o3)) + bgu,pt %XCC, 90b + add %o1, 1, %o1 + retl + mov EX_RETVAL(GLOBAL_SPARE), %o0 + + .size FUNC_NAME, .-FUNC_NAME diff --git a/arch/sparc64/lib/NG2page.S b/arch/sparc64/lib/NG2page.S new file mode 100644 index 00000000000..73b6b7c72cb --- /dev/null +++ b/arch/sparc64/lib/NG2page.S @@ -0,0 +1,61 @@ +/* NG2page.S: Niagara-2 optimized clear and copy page. + * + * Copyright (C) 2007 (davem@davemloft.net) + */ + +#include <asm/asi.h> +#include <asm/page.h> +#include <asm/visasm.h> + + .text + .align 32 + + /* This is heavily simplified from the sun4u variants + * because Niagara-2 does not have any D-cache aliasing issues. + */ +NG2copy_user_page: /* %o0=dest, %o1=src, %o2=vaddr */ + prefetch [%o1 + 0x00], #one_read + prefetch [%o1 + 0x40], #one_read + VISEntryHalf + set PAGE_SIZE, %g7 + sub %o0, %o1, %g3 +1: stxa %g0, [%o1 + %g3] ASI_BLK_INIT_QUAD_LDD_P + subcc %g7, 64, %g7 + ldda [%o1] ASI_BLK_P, %f0 + stda %f0, [%o1 + %g3] ASI_BLK_P + add %o1, 64, %o1 + bne,pt %xcc, 1b + prefetch [%o1 + 0x40], #one_read + membar #Sync + VISExitHalf + retl + nop + +#define BRANCH_ALWAYS 0x10680000 +#define NOP 0x01000000 +#define NG_DO_PATCH(OLD, NEW) \ + sethi %hi(NEW), %g1; \ + or %g1, %lo(NEW), %g1; \ + sethi %hi(OLD), %g2; \ + or %g2, %lo(OLD), %g2; \ + sub %g1, %g2, %g1; \ + sethi %hi(BRANCH_ALWAYS), %g3; \ + sll %g1, 11, %g1; \ + srl %g1, 11 + 2, %g1; \ + or %g3, %lo(BRANCH_ALWAYS), %g3; \ + or %g3, %g1, %g3; \ + stw %g3, [%g2]; \ + sethi %hi(NOP), %g3; \ + or %g3, %lo(NOP), %g3; \ + stw %g3, [%g2 + 0x4]; \ + flush %g2; + + .globl niagara2_patch_pageops + .type niagara2_patch_pageops,#function +niagara2_patch_pageops: + NG_DO_PATCH(copy_user_page, NG2copy_user_page) + NG_DO_PATCH(_clear_page, NGclear_page) + NG_DO_PATCH(clear_user_page, NGclear_user_page) + retl + nop + .size niagara2_patch_pageops,.-niagara2_patch_pageops diff --git a/arch/sparc64/lib/NG2patch.S b/arch/sparc64/lib/NG2patch.S new file mode 100644 index 00000000000..28c36f06a6d --- /dev/null +++ b/arch/sparc64/lib/NG2patch.S @@ -0,0 +1,33 @@ +/* NG2patch.S: Patch Ultra-I routines with Niagara-2 variant. + * + * Copyright (C) 2007 David S. Miller <davem@davemloft.net> + */ + +#define BRANCH_ALWAYS 0x10680000 +#define NOP 0x01000000 +#define NG_DO_PATCH(OLD, NEW) \ + sethi %hi(NEW), %g1; \ + or %g1, %lo(NEW), %g1; \ + sethi %hi(OLD), %g2; \ + or %g2, %lo(OLD), %g2; \ + sub %g1, %g2, %g1; \ + sethi %hi(BRANCH_ALWAYS), %g3; \ + sll %g1, 11, %g1; \ + srl %g1, 11 + 2, %g1; \ + or %g3, %lo(BRANCH_ALWAYS), %g3; \ + or %g3, %g1, %g3; \ + stw %g3, [%g2]; \ + sethi %hi(NOP), %g3; \ + or %g3, %lo(NOP), %g3; \ + stw %g3, [%g2 + 0x4]; \ + flush %g2; + + .globl niagara2_patch_copyops + .type niagara2_patch_copyops,#function +niagara2_patch_copyops: + NG_DO_PATCH(memcpy, NG2memcpy) + NG_DO_PATCH(___copy_from_user, NG2copy_from_user) + NG_DO_PATCH(___copy_to_user, NG2copy_to_user) + retl + nop + .size niagara2_patch_copyops,.-niagara2_patch_copyops diff --git a/arch/sparc64/lib/NGpage.S b/arch/sparc64/lib/NGpage.S index 8ce3a0c9c53..428920de05b 100644 --- a/arch/sparc64/lib/NGpage.S +++ b/arch/sparc64/lib/NGpage.S @@ -45,6 +45,7 @@ NGcopy_user_page: /* %o0=dest, %o1=src, %o2=vaddr */ retl nop + .globl NGclear_page, NGclear_user_page NGclear_page: /* %o0=dest */ NGclear_user_page: /* %o0=dest, %o1=vaddr */ mov 8, %g1 diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index aff661fe2ee..0eabe73c964 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -612,6 +612,8 @@ static int ubd_open_dev(struct ubd *ubd_dev) ubd_dev->fd = fd; if(ubd_dev->cow.file != NULL){ + blk_queue_max_sectors(ubd_dev->queue, 8 * sizeof(long)); + err = -ENOMEM; ubd_dev->cow.bitmap = (void *) vmalloc(ubd_dev->cow.bitmap_len); if(ubd_dev->cow.bitmap == NULL){ @@ -712,8 +714,6 @@ static int ubd_add(int n, char **error_out) ubd_dev->queue->queuedata = ubd_dev; blk_queue_max_hw_segments(ubd_dev->queue, MAX_SG); - if(ubd_dev->cow.file != NULL) - blk_queue_max_sectors(ubd_dev->queue, 8 * sizeof(long)); err = ubd_disk_register(MAJOR_NR, ubd_dev->size, n, &ubd_gendisk[n]); if(err){ *error_out = "Failed to register device"; diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile index 128561d3e87..b024e4a8689 100644 --- a/arch/x86_64/Makefile +++ b/arch/x86_64/Makefile @@ -57,8 +57,8 @@ cflags-y += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,) cflags-y += -maccumulate-outgoing-args # do binutils support CFI? -cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) -AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) # is .cfi_signal_frame supported too? cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S index e89abcdbdde..b6167fe3330 100644 --- a/arch/x86_64/kernel/head.S +++ b/arch/x86_64/kernel/head.S @@ -345,8 +345,7 @@ NEXT_PAGE(level2_kernel_pgt) /* 40MB kernel mapping. The kernel code cannot be bigger than that. When you change this change KERNEL_TEXT_SIZE in page.h too. */ /* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */ - PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, - KERNEL_TEXT_SIZE/PMD_SIZE) + PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, KERNEL_TEXT_SIZE/PMD_SIZE) /* Module mapping starts here */ .fill (PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0 diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index f57f8b90191..966fa106249 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -397,14 +397,12 @@ static void clear_IO_APIC (void) int skip_ioapic_setup; int ioapic_force; -/* dummy parsing: see setup.c */ - -static int __init disable_ioapic_setup(char *str) +static int __init parse_noapic(char *str) { - skip_ioapic_setup = 1; + disable_ioapic_setup(); return 0; } -early_param("noapic", disable_ioapic_setup); +early_param("noapic", parse_noapic); /* Actually the next is obsolete, but keep it for paranoid reasons -AK */ static int __init disable_timer_pin_setup(char *arg) diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index cb8ee9d02f8..0ec6d2ddb93 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -85,7 +85,7 @@ int __init check_nmi_watchdog (void) int *counts; int cpu; - if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DEFAULT)) + if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) return 0; if (!atomic_read(&nmi_active)) @@ -442,7 +442,7 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, if (!!old_state == !!nmi_watchdog_enabled) return 0; - if (atomic_read(&nmi_active) < 0) { + if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) { printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); return -EIO; } diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c index 05d745ede56..29711445c81 100644 --- a/arch/x86_64/kernel/pci-dma.c +++ b/arch/x86_64/kernel/pci-dma.c @@ -82,6 +82,10 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, if (dma_mask == 0) dma_mask = DMA_32BIT_MASK; + /* Device not DMA able */ + if (dev->dma_mask == NULL) + return NULL; + /* Don't invoke OOM killer */ gfp |= __GFP_NORETRY; |