diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-omap1/clock.c | 107 | ||||
| -rw-r--r-- | arch/arm/mach-omap1/clock.h | 14 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/clock.c | 39 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/clock.h | 18 | ||||
| -rw-r--r-- | arch/arm/plat-omap/clock.c | 25 |
5 files changed, 116 insertions, 87 deletions
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index f1958e882e8..638490e62d5 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -20,6 +20,7 @@ #include <linux/clk.h> #include <asm/io.h> +#include <asm/mach-types.h> #include <asm/arch/cpu.h> #include <asm/arch/usb.h> @@ -586,77 +587,53 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) *-------------------------------------------------------------------------*/ #ifdef CONFIG_OMAP_RESET_CLOCKS -/* - * Resets some clocks that may be left on from bootloader, - * but leaves serial clocks on. See also omap_late_clk_reset(). - */ -static inline void omap1_early_clk_reset(void) -{ - //omap_writel(0x3 << 29, MOD_CONF_CTRL_0); -} -static int __init omap1_late_clk_reset(void) +static void __init omap1_clk_disable_unused(struct clk *clk) { - /* Turn off all unused clocks */ - struct clk *p; __u32 regval32; - /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ - regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4); - omap_writew(regval32, SOFT_REQ_REG); - omap_writew(0, SOFT_REQ_REG2); - - list_for_each_entry(p, &clocks, node) { - if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) || - p->enable_reg == 0) - continue; - - /* Clocks in the DSP domain need api_ck. Just assume bootloader - * has not enabled any DSP clocks */ - if ((u32)p->enable_reg == DSP_IDLECT2) { - printk(KERN_INFO "Skipping reset check for DSP domain " - "clock \"%s\"\n", p->name); - continue; - } + /* Clocks in the DSP domain need api_ck. Just assume bootloader + * has not enabled any DSP clocks */ + if ((u32)clk->enable_reg == DSP_IDLECT2) { + printk(KERN_INFO "Skipping reset check for DSP domain " + "clock \"%s\"\n", clk->name); + return; + } - /* Is the clock already disabled? */ - if (p->flags & ENABLE_REG_32BIT) { - if (p->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readl(p->enable_reg); - else - regval32 = omap_readl(p->enable_reg); - } else { - if (p->flags & VIRTUAL_IO_ADDRESS) - regval32 = __raw_readw(p->enable_reg); + /* Is the clock already disabled? */ + if (clk->flags & ENABLE_REG_32BIT) { + if (clk->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readl(clk->enable_reg); else - regval32 = omap_readw(p->enable_reg); - } - - if ((regval32 & (1 << p->enable_bit)) == 0) - continue; + regval32 = omap_readl(clk->enable_reg); + } else { + if (clk->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readw(clk->enable_reg); + else + regval32 = omap_readw(clk->enable_reg); + } - /* FIXME: This clock seems to be necessary but no-one - * has asked for its activation. */ - if (p == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera - || p == &ck_dpll1out.clk // FIX: SoSSI, SSR - || p == &arm_gpio_ck // FIX: GPIO code for 1510 - ) { - printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", - p->name); - continue; - } + if ((regval32 & (1 << clk->enable_bit)) == 0) + return; - printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name); - p->disable(p); - printk(" done\n"); + /* FIXME: This clock seems to be necessary but no-one + * has asked for its activation. */ + if (clk == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera + || clk == &ck_dpll1out.clk // FIX: SoSSI, SSR + || clk == &arm_gpio_ck // FIX: GPIO code for 1510 + ) { + printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", + clk->name); + return; } - return 0; + printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name); + clk->disable(clk); + printk(" done\n"); } -late_initcall(omap1_late_clk_reset); #else -#define omap1_early_clk_reset() {} +#define omap1_clk_disable_unused NULL #endif static struct clk_functions omap1_clk_functions = { @@ -664,6 +641,7 @@ static struct clk_functions omap1_clk_functions = { .clk_disable = omap1_clk_disable, .clk_round_rate = omap1_clk_round_rate, .clk_set_rate = omap1_clk_set_rate, + .clk_disable_unused = omap1_clk_disable_unused, }; int __init omap1_clk_init(void) @@ -671,8 +649,13 @@ int __init omap1_clk_init(void) struct clk ** clkp; const struct omap_clock_config *info; int crystal_type = 0; /* Default 12 MHz */ + u32 reg; + + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + reg = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(reg, SOFT_REQ_REG); + omap_writew(0, SOFT_REQ_REG2); - omap1_early_clk_reset(); clk_init(&omap1_clk_functions); /* By default all idlect1 clocks are allowed to idle */ @@ -772,6 +755,12 @@ int __init omap1_clk_init(void) omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); #endif + /* Amstrad Delta wants BCLK high when inactive */ + if (machine_is_ams_delta()) + omap_writel(omap_readl(ULPD_CLOCK_CTRL) | + (1 << SDW_MCLK_INV_BIT), + ULPD_CLOCK_CTRL); + /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ /* (on 730, bit 13 must not be cleared) */ if (cpu_is_omap730()) diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index b7c68819c4e..f7df00205c4 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -89,6 +89,7 @@ struct arm_idlect1_clk { #define EN_DSPTIMCK 5 /* Various register defines for clock controls scattered around OMAP chip */ +#define SDW_MCLK_INV_BIT 2 /* In ULPD_CLKC_CTRL */ #define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */ #define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */ #define SWD_ULPD_PLL_CLK_REQ 1 /* In SWD_CLK_DIV_CTRL_SEL */ @@ -741,6 +742,18 @@ static struct clk i2c_fck = { .disable = &omap1_clk_disable_generic, }; +static struct clk i2c_ick = { + .name = "i2c_ick", + .id = 1, + .flags = CLOCK_IN_OMAP16XX | + VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT | + ALWAYS_ENABLED, + .parent = &armper_ck.clk, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable_generic, + .disable = &omap1_clk_disable_generic, +}; + static struct clk * onchip_clks[] = { /* non-ULPD clocks */ &ck_ref, @@ -790,6 +803,7 @@ static struct clk * onchip_clks[] = { /* Virtual clocks */ &virtual_ck_mpu, &i2c_fck, + &i2c_ick, }; #endif diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 26ac49ecb78..0de201c3d50 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -1025,12 +1025,29 @@ static int omap2_select_table_rate(struct clk * clk, unsigned long rate) * Omap2 clock reset and init functions *-------------------------------------------------------------------------*/ +#ifdef CONFIG_OMAP_RESET_CLOCKS +static void __init omap2_clk_disable_unused(struct clk *clk) +{ + u32 regval32; + + regval32 = __raw_readl(clk->enable_reg); + if ((regval32 & (1 << clk->enable_bit)) == 0) + return; + + printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name); + _omap2_clk_disable(clk); +} +#else +#define omap2_clk_disable_unused NULL +#endif + static struct clk_functions omap2_clk_functions = { .clk_enable = omap2_clk_enable, .clk_disable = omap2_clk_disable, .clk_round_rate = omap2_clk_round_rate, .clk_set_rate = omap2_clk_set_rate, .clk_set_parent = omap2_clk_set_parent, + .clk_disable_unused = omap2_clk_disable_unused, }; static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys) @@ -1070,28 +1087,6 @@ void omap2_clk_prepare_for_reboot(void) clk_set_rate(vclk, rate); } -#ifdef CONFIG_OMAP_RESET_CLOCKS -static void __init omap2_disable_unused_clocks(void) -{ - struct clk *ck; - u32 regval32; - - list_for_each_entry(ck, &clocks, node) { - if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) || - ck->enable_reg == 0) - continue; - - regval32 = __raw_readl(ck->enable_reg); - if ((regval32 & (1 << ck->enable_bit)) == 0) - continue; - - printk(KERN_INFO "Disabling unused clock \"%s\"\n", ck->name); - _omap2_clk_disable(ck); - } -} -late_initcall(omap2_disable_unused_clocks); -#endif - /* * Switch the MPU rate if specified on cmdline. * We cannot do this early until cmdline is parsed. diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 223152d9663..8816f5a33a2 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -1368,7 +1368,8 @@ static struct clk mcbsp5_fck = { }; static struct clk mcspi1_ick = { - .name = "mcspi1_ick", + .name = "mcspi_ick", + .id = 1, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, @@ -1377,7 +1378,8 @@ static struct clk mcspi1_ick = { }; static struct clk mcspi1_fck = { - .name = "mcspi1_fck", + .name = "mcspi_fck", + .id = 1, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, @@ -1386,7 +1388,8 @@ static struct clk mcspi1_fck = { }; static struct clk mcspi2_ick = { - .name = "mcspi2_ick", + .name = "mcspi_ick", + .id = 2, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, @@ -1395,7 +1398,8 @@ static struct clk mcspi2_ick = { }; static struct clk mcspi2_fck = { - .name = "mcspi2_fck", + .name = "mcspi_fck", + .id = 2, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, @@ -1404,7 +1408,8 @@ static struct clk mcspi2_fck = { }; static struct clk mcspi3_ick = { - .name = "mcspi3_ick", + .name = "mcspi_ick", + .id = 3, .parent = &l4_ck, .flags = CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, @@ -1413,7 +1418,8 @@ static struct clk mcspi3_ick = { }; static struct clk mcspi3_fck = { - .name = "mcspi3_fck", + .name = "mcspi_fck", + .id = 3, .parent = &func_48m_ck, .flags = CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 4abf2714f2d..f1179ad4be1 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -323,6 +323,31 @@ EXPORT_SYMBOL(clk_allow_idle); /*-------------------------------------------------------------------------*/ +#ifdef CONFIG_OMAP_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + unsigned long flags; + + list_for_each_entry(ck, &clocks, node) { + if (ck->usecount > 0 || (ck->flags & ALWAYS_ENABLED) || + ck->enable_reg == 0) + continue; + + spin_lock_irqsave(&clockfw_lock, flags); + if (arch_clock->clk_disable_unused) + arch_clock->clk_disable_unused(ck); + spin_unlock_irqrestore(&clockfw_lock, flags); + } + + return 0; +} +late_initcall(clk_disable_unused); +#endif + int __init clk_init(struct clk_functions * custom_clocks) { if (!custom_clocks) { |