diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-omap1/io.c | 1 | ||||
| -rw-r--r-- | arch/arm/plat-omap/Kconfig | 13 | ||||
| -rw-r--r-- | arch/arm/plat-omap/clock.c | 369 | ||||
| -rw-r--r-- | arch/arm/plat-omap/clock.h | 10 | ||||
| -rw-r--r-- | arch/arm/plat-omap/dma.c | 44 | ||||
| -rw-r--r-- | arch/arm/plat-omap/mcbsp.c | 97 | ||||
| -rw-r--r-- | arch/arm/plat-omap/mux.c | 17 | ||||
| -rw-r--r-- | arch/arm/plat-omap/usb.c | 2 |
8 files changed, 461 insertions, 92 deletions
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index f1258c1f3a9..207df0fe934 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -17,6 +17,7 @@ #include <asm/io.h> #include <asm/arch/tc.h> +extern int clk_init(void); extern void omap_check_revision(void); /* diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index a72fe55b513..345365852f8 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -19,6 +19,19 @@ endchoice comment "OMAP Feature Selections" +config OMAP_RESET_CLOCKS + bool "Reset unused clocks during boot" + depends on ARCH_OMAP + default n + help + Say Y if you want to reset unused clocks during boot. + This option saves power, but assumes all drivers are + using the clock framework. Broken drivers that do not + yet use clock framework may not work with this option. + If you are booting from another operating system, you + probably do not want this option enabled until your + device drivers work properly. + config OMAP_MUX bool "OMAP multiplexing support" depends on ARCH_OMAP diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 155157f309e..59d91b3262b 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -14,6 +14,7 @@ #include <linux/errno.h> #include <linux/err.h> +#include <asm/io.h> #include <asm/semaphore.h> #include <asm/hardware/clock.h> #include <asm/arch/board.h> @@ -25,6 +26,8 @@ static LIST_HEAD(clocks); static DECLARE_MUTEX(clocks_sem); static DEFINE_SPINLOCK(clockfw_lock); static void propagate_rate(struct clk * clk); +/* UART clock function */ +static int set_uart_rate(struct clk * clk, unsigned long rate); /* External clock (MCLK & BCLK) functions */ static int set_ext_clk_rate(struct clk * clk, unsigned long rate); static long round_ext_clk_rate(struct clk * clk, unsigned long rate); @@ -34,7 +37,7 @@ static int select_table_rate(struct clk * clk, unsigned long rate); static long round_to_table_rate(struct clk * clk, unsigned long rate); void clk_setdpll(__u16, __u16); -struct mpu_rate rate_table[] = { +static struct mpu_rate rate_table[] = { /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv */ @@ -48,7 +51,7 @@ struct mpu_rate rate_table[] = { { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ - { 48000000, 12000000, 192000000, 0x0ccf, 0x2810 }, /* 4/4/4/4/8/8 */ + { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/8/4/4/8/8 */ { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ #endif #if defined(CONFIG_OMAP_ARM_182MHZ) @@ -58,7 +61,7 @@ struct mpu_rate rate_table[] = { { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ #endif #if defined(CONFIG_OMAP_ARM_150MHZ) - { 150000000, 12000000, 150000000, 0x150a, 0x2cb0 }, /* 0/0/1/1/2/2 */ + { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ #endif #if defined(CONFIG_OMAP_ARM_120MHZ) { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ @@ -76,19 +79,11 @@ struct mpu_rate rate_table[] = { }; -static void ckctl_recalc(struct clk * clk) -{ - int dsor; - - /* Calculate divisor encoded as 2-bit exponent */ - dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); - if (unlikely(clk->rate == clk->parent->rate / dsor)) - return; /* No change, quick exit */ - clk->rate = clk->parent->rate / dsor; - - if (unlikely(clk->flags & RATE_PROPAGATES)) - propagate_rate(clk); -} +static void ckctl_recalc(struct clk * clk); +int __clk_enable(struct clk *clk); +void __clk_disable(struct clk *clk); +void __clk_unuse(struct clk *clk); +int __clk_use(struct clk *clk); static void followparent_recalc(struct clk * clk) @@ -102,6 +97,14 @@ static void watchdog_recalc(struct clk * clk) clk->rate = clk->parent->rate / 14; } +static void uart_recalc(struct clk * clk) +{ + unsigned int val = omap_readl(clk->enable_reg); + if (val & clk->enable_bit) + clk->rate = 48000000; + else + clk->rate = 12000000; +} static struct clk ck_ref = { .name = "ck_ref", @@ -138,7 +141,7 @@ static struct clk arm_ck = { static struct clk armper_ck = { .name = "armper_ck", .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + .flags = CLOCK_IN_OMAP730 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | RATE_CKCTL, .enable_reg = ARM_IDLECT2, .enable_bit = EN_PERCK, @@ -185,7 +188,7 @@ static struct clk armwdt_ck = { static struct clk arminth_ck16xx = { .name = "arminth_ck", .parent = &arm_ck, - .flags = CLOCK_IN_OMAP16XX, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, .recalc = &followparent_recalc, /* Note: On 16xx the frequency can be divided by 2 by programming * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 @@ -214,6 +217,38 @@ static struct clk dspmmu_ck = { .recalc = &ckctl_recalc, }; +static struct clk dspper_ck = { + .name = "dspper_ck", + .parent = &ck_dpll1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + RATE_CKCTL | DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &followparent_recalc, + //.recalc = &ckctl_recalc, +}; + +static struct clk dspxor_ck = { + .name = "dspxor_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, +}; + +static struct clk dsptim_ck = { + .name = "dsptim_ck", + .parent = &ck_ref, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_DSPTIMCK, + .recalc = &followparent_recalc, +}; + static struct clk tc_ck = { .name = "tc_ck", .parent = &ck_dpll1, @@ -226,7 +261,7 @@ static struct clk tc_ck = { static struct clk arminth_ck1510 = { .name = "arminth_ck", .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510, + .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, .recalc = &followparent_recalc, /* Note: On 1510 the frequency follows TC_CK * @@ -237,7 +272,7 @@ static struct clk arminth_ck1510 = { static struct clk tipb_ck = { .name = "tibp_ck", .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510, + .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, .recalc = &followparent_recalc, }; @@ -271,14 +306,15 @@ static struct clk tc2_ck = { static struct clk dma_ck = { .name = "dma_ck", .parent = &tc_ck, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + ALWAYS_ENABLED, .recalc = &followparent_recalc, }; static struct clk dma_lcdfree_ck = { .name = "dma_lcdfree_ck", .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, .recalc = &followparent_recalc, }; @@ -303,14 +339,14 @@ static struct clk lb_ck = { static struct clk rhea1_ck = { .name = "rhea1_ck", .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, .recalc = &followparent_recalc, }; static struct clk rhea2_ck = { .name = "rhea2_ck", .parent = &tc_ck, - .flags = CLOCK_IN_OMAP16XX, + .flags = CLOCK_IN_OMAP16XX | ALWAYS_ENABLED, .recalc = &followparent_recalc, }; @@ -325,43 +361,55 @@ static struct clk lcd_ck = { .recalc = &ckctl_recalc, }; -static struct clk uart1_ck = { +static struct clk uart1_1510 = { + .name = "uart1_ck", + /* Direct from ULPD, no parent */ + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED, + .enable_reg = MOD_CONF_CTRL_0, + .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ + .set_rate = &set_uart_rate, + .recalc = &uart_recalc, +}; + +static struct clk uart1_16xx = { .name = "uart1_ck", /* Direct from ULPD, no parent */ .rate = 48000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT, .enable_reg = MOD_CONF_CTRL_0, .enable_bit = 29, - /* (Only on 1510) - * The "enable bit" actually chooses between 48MHz and 12MHz. - */ }; static struct clk uart2_ck = { .name = "uart2_ck", /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT, .enable_reg = MOD_CONF_CTRL_0, - .enable_bit = 30, - /* (for both 1510 and 16xx) - * The "enable bit" actually chooses between 48MHz and 12MHz/32kHz. - */ + .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ + .set_rate = &set_uart_rate, + .recalc = &uart_recalc, }; -static struct clk uart3_ck = { +static struct clk uart3_1510 = { + .name = "uart3_ck", + /* Direct from ULPD, no parent */ + .rate = 12000000, + .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED, + .enable_reg = MOD_CONF_CTRL_0, + .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ + .set_rate = &set_uart_rate, + .recalc = &uart_recalc, +}; + +static struct clk uart3_16xx = { .name = "uart3_ck", /* Direct from ULPD, no parent */ .rate = 48000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT, .enable_reg = MOD_CONF_CTRL_0, .enable_bit = 31, - /* (Only on 1510) - * The "enable bit" actually chooses between 48MHz and 12MHz. - */ }; static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ @@ -480,6 +528,9 @@ static struct clk * onchip_clks[] = { /* CK_GEN2 clocks */ &dsp_ck, &dspmmu_ck, + &dspper_ck, + &dspxor_ck, + &dsptim_ck, /* CK_GEN3 clocks */ &tc_ck, &tipb_ck, @@ -494,9 +545,11 @@ static struct clk * onchip_clks[] = { &rhea2_ck, &lcd_ck, /* ULPD clocks */ - &uart1_ck, + &uart1_1510, + &uart1_16xx, &uart2_ck, - &uart3_ck, + &uart3_1510, + &uart3_16xx, &usb_clko, &usb_hhc_ck1510, &usb_hhc_ck16xx, &mclk_1510, &mclk_16xx, @@ -547,14 +600,34 @@ int __clk_enable(struct clk *clk) return 0; } + if (clk->flags & DSP_DOMAIN_CLOCK) { + __clk_use(&api_ck); + } + if (clk->flags & ENABLE_REG_32BIT) { - regval32 = omap_readl(clk->enable_reg); - regval32 |= (1 << clk->enable_bit); - omap_writel(regval32, clk->enable_reg); + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval32 = __raw_readl(clk->enable_reg); + regval32 |= (1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); + } else { + regval32 = omap_readl(clk->enable_reg); + regval32 |= (1 << clk->enable_bit); + omap_writel(regval32, clk->enable_reg); + } } else { - regval16 = omap_readw(clk->enable_reg); - regval16 |= (1 << clk->enable_bit); - omap_writew(regval16, clk->enable_reg); + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval16 = __raw_readw(clk->enable_reg); + regval16 |= (1 << clk->enable_bit); + __raw_writew(regval16, clk->enable_reg); + } else { + regval16 = omap_readw(clk->enable_reg); + regval16 |= (1 << clk->enable_bit); + omap_writew(regval16, clk->enable_reg); + } + } + + if (clk->flags & DSP_DOMAIN_CLOCK) { + __clk_unuse(&api_ck); } return 0; @@ -569,14 +642,34 @@ void __clk_disable(struct clk *clk) if (clk->enable_reg == 0) return; + if (clk->flags & DSP_DOMAIN_CLOCK) { + __clk_use(&api_ck); + } + if (clk->flags & ENABLE_REG_32BIT) { - regval32 = omap_readl(clk->enable_reg); - regval32 &= ~(1 << clk->enable_bit); - omap_writel(regval32, clk->enable_reg); + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval32 = __raw_readl(clk->enable_reg); + regval32 &= ~(1 << clk->enable_bit); + __raw_writel(regval32, clk->enable_reg); + } else { + regval32 = omap_readl(clk->enable_reg); + regval32 &= ~(1 << clk->enable_bit); + omap_writel(regval32, clk->enable_reg); + } } else { - regval16 = omap_readw(clk->enable_reg); - regval16 &= ~(1 << clk->enable_bit); - omap_writew(regval16, clk->enable_reg); + if (clk->flags & VIRTUAL_IO_ADDRESS) { + regval16 = __raw_readw(clk->enable_reg); + regval16 &= ~(1 << clk->enable_bit); + __raw_writew(regval16, clk->enable_reg); + } else { + regval16 = omap_readw(clk->enable_reg); + regval16 &= ~(1 << clk->enable_bit); + omap_writew(regval16, clk->enable_reg); + } + } + + if (clk->flags & DSP_DOMAIN_CLOCK) { + __clk_unuse(&api_ck); } } @@ -766,6 +859,33 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate) return dsor_exp; } + +static void ckctl_recalc(struct clk * clk) +{ + int dsor; + + /* Calculate divisor encoded as 2-bit exponent */ + if (clk->flags & DSP_DOMAIN_CLOCK) { + /* The clock control bits are in DSP domain, + * so api_ck is needed for access. + * Note that DSP_CKCTL virt addr = phys addr, so + * we must use __raw_readw() instead of omap_readw(). + */ + __clk_use(&api_ck); + dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); + __clk_unuse(&api_ck); + } else { + dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); + } + if (unlikely(clk->rate == clk->parent->rate / dsor)) + return; /* No change, quick exit */ + clk->rate = clk->parent->rate / dsor; + + if (unlikely(clk->flags & RATE_PROPAGATES)) + propagate_rate(clk); +} + + long clk_round_rate(struct clk *clk, unsigned long rate) { int dsor_exp; @@ -826,6 +946,9 @@ static int select_table_rate(struct clk * clk, unsigned long rate) if (!ptr->rate) return -EINVAL; + if (!ptr->rate) + return -EINVAL; + if (unlikely(ck_dpll1.rate == 0)) { omap_writew(ptr->dpllctl_val, DPLL_CTL); ck_dpll1.rate = ptr->pll_rate; @@ -921,6 +1044,23 @@ static unsigned calc_ext_dsor(unsigned long rate) return dsor; } +/* Only needed on 1510 */ +static int set_uart_rate(struct clk * clk, unsigned long rate) +{ + unsigned int val; + + val = omap_readl(clk->enable_reg); + if (rate == 12000000) + val &= ~(1 << clk->enable_bit); + else if (rate == 48000000) + val |= (1 << clk->enable_bit); + else + return -EINVAL; + omap_writel(val, clk->enable_reg); + clk->rate = rate; + + return 0; +} static int set_ext_clk_rate(struct clk * clk, unsigned long rate) { @@ -985,7 +1125,18 @@ void clk_unregister(struct clk *clk) } EXPORT_SYMBOL(clk_unregister); - +#ifdef CONFIG_OMAP_RESET_CLOCKS +/* + * Resets some clocks that may be left on from bootloader, + * but leaves serial clocks on. See also omap_late_clk_reset(). + */ +static inline void omap_early_clk_reset(void) +{ + //omap_writel(0x3 << 29, MOD_CONF_CTRL_0); +} +#else +#define omap_early_clk_reset() {} +#endif int __init clk_init(void) { @@ -993,6 +1144,8 @@ int __init clk_init(void) const struct omap_clock_config *info; int crystal_type = 0; /* Default 12 MHz */ + omap_early_clk_reset(); + for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) { if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) { clk_register(*clkp); @@ -1023,9 +1176,42 @@ int __init clk_init(void) ck_ref.rate = 19200000; #endif + printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", + omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), + omap_readw(ARM_CKCTL)); + /* We want to be in syncronous scalable mode */ omap_writew(0x1000, ARM_SYSST); +#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER + /* Use values set by bootloader. Determine PLL rate and recalculate + * dependent clocks as if kernel had changed PLL or divisors. + */ + { + unsigned pll_ctl_val = omap_readw(DPLL_CTL); + + ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ + if (pll_ctl_val & 0x10) { + /* PLL enabled, apply multiplier and divisor */ + if (pll_ctl_val & 0xf80) + ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; + ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; + } else { + /* PLL disabled, apply bypass divisor */ + switch (pll_ctl_val & 0xc) { + case 0: + break; + case 0x4: + ck_dpll1.rate /= 2; + break; + default: + ck_dpll1.rate /= 4; + break; + } + } + } + propagate_rate(&ck_dpll1); +#else /* Find the highest supported frequency and enable it */ if (select_table_rate(&virtual_ck_mpu, ~0)) { printk(KERN_ERR "System frequencies not set. Check your config.\n"); @@ -1034,12 +1220,13 @@ int __init clk_init(void) omap_writew(0x1005, ARM_CKCTL); ck_dpll1.rate = 60000000; propagate_rate(&ck_dpll1); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): %ld/%ld/%ld\n", - ck_ref.rate, ck_dpll1.rate, arm_ck.rate); } - +#endif /* Cache rates for clocks connected to ck_ref (not dpll1) */ propagate_rate(&ck_ref); + printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld/%ld MHz\n", + ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, + ck_dpll1.rate, arm_ck.rate); #ifdef CONFIG_MACH_OMAP_PERSEUS2 /* Select slicer output as OMAP input clock */ @@ -1074,3 +1261,63 @@ int __init clk_init(void) return 0; } + + +#ifdef CONFIG_OMAP_RESET_CLOCKS + +static int __init omap_late_clk_reset(void) +{ + /* Turn off all unused clocks */ + struct clk *p; + __u32 regval32; + + omap_writew(0, SOFT_REQ_REG); + omap_writew(0, SOFT_REQ_REG2); + + list_for_each_entry(p, &clocks, node) { + if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) || + p->enable_reg == 0) + continue; + + /* Assume no DSP clocks have been activated by bootloader */ + if (p->flags & DSP_DOMAIN_CLOCK) + continue; + + /* Is the clock already disabled? */ + if (p->flags & ENABLE_REG_32BIT) { + if (p->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readl(p->enable_reg); + else + regval32 = omap_readl(p->enable_reg); + } else { + if (p->flags & VIRTUAL_IO_ADDRESS) + regval32 = __raw_readw(p->enable_reg); + else + regval32 = omap_readw(p->enable_reg); + } + + if ((regval32 & (1 << p->enable_bit)) == 0) + continue; + + /* FIXME: This clock seems to be necessary but no-one + * has asked for its activation. */ + if (p == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera + || p == &ck_dpll1out // FIX: SoSSI, SSR + || p == &arm_gpio_ck // FIX: GPIO code for 1510 + ) { + printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", + p->name); + continue; + } + + printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name); + __clk_disable(p); + printk(" done\n"); + } + + return 0; +} + +late_initcall(omap_late_clk_reset); + +#endif diff --git a/arch/arm/plat-omap/clock.h b/arch/arm/plat-omap/clock.h index 08b504deb1a..a89e1e8c251 100644 --- a/arch/arm/plat-omap/clock.h +++ b/arch/arm/plat-omap/clock.h @@ -52,6 +52,8 @@ struct mpu_rate { #define CLOCK_IN_OMAP16XX 64 #define CLOCK_IN_OMAP1510 128 #define CLOCK_IN_OMAP730 256 +#define DSP_DOMAIN_CLOCK 512 +#define VIRTUAL_IO_ADDRESS 1024 /* ARM_CKCTL bit shifts */ #define CKCTL_PERDIV_OFFSET 0 @@ -63,6 +65,8 @@ struct mpu_rate { /*#define ARM_TIMXO 12*/ #define EN_DSPCK 13 /*#define ARM_INTHCK_SEL 14*/ /* Divide-by-2 for mpu inth_ck */ +/* DSP_CKCTL bit shifts */ +#define CKCTL_DSPPERDIV_OFFSET 0 /* ARM_IDLECT1 bit shifts */ /*#define IDLWDT_ARM 0*/ @@ -96,6 +100,9 @@ struct mpu_rate { #define EN_TC1_CK 2 #define EN_TC2_CK 4 +/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */ +#define EN_DSPTIMCK 5 + /* Various register defines for clock controls scattered around OMAP chip */ #define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */ #define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */ @@ -103,7 +110,8 @@ struct mpu_rate { #define COM_ULPD_PLL_CLK_REQ 1 /* In COM_CLK_DIV_CTRL_SEL */ #define SWD_CLK_DIV_CTRL_SEL 0xfffe0874 #define COM_CLK_DIV_CTRL_SEL 0xfffe0878 - +#define SOFT_REQ_REG 0xfffe0834 +#define SOFT_REQ_REG2 0xfffe0880 int clk_register(struct clk *clk); void clk_unregister(struct clk *clk); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 015bd2cf869..c0a5c2fa42b 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -794,10 +794,6 @@ static void set_b1_regs(void) w = omap_readw(OMAP1610_DMA_LCD_CTRL); /* Always set the source port as SDRAM for now*/ w &= ~(0x03 << 6); - if (lcd_dma.ext_ctrl) - w |= 1 << 8; - else - w &= ~(1 << 8); if (lcd_dma.callback != NULL) w |= 1 << 1; /* Block interrupt enable */ else @@ -889,9 +885,15 @@ void omap_enable_lcd_dma(void) */ if (enable_1510_mode || !lcd_dma.ext_ctrl) return; + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w |= 1 << 8; + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + w = omap_readw(OMAP1610_DMA_LCD_CCR); w |= 1 << 7; omap_writew(w, OMAP1610_DMA_LCD_CCR); + lcd_dma.active = 1; } @@ -922,10 +924,19 @@ void omap_setup_lcd_dma(void) void omap_stop_lcd_dma(void) { + u16 w; + lcd_dma.active = 0; - if (!enable_1510_mode && lcd_dma.ext_ctrl) - omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~(1 << 7), - OMAP1610_DMA_LCD_CCR); + if (enable_1510_mode || !lcd_dma.ext_ctrl) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + w &= ~(1 << 7); + omap_writew(w, OMAP1610_DMA_LCD_CCR); + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w &= ~(1 << 8); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); } /* @@ -972,6 +983,25 @@ dma_addr_t omap_get_dma_dst_pos(int lch) (OMAP_DMA_CDSA_U(lch) << 16)); } +int omap_dma_running(void) +{ + int lch; + + /* Check if LCD DMA is running */ + if (cpu_is_omap16xx()) + if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) + return 1; + + for (lch = 0; lch < dma_chan_count; lch++) { + u16 w; + + w = omap_readw(OMAP_DMA_CCR(lch)); + if (w & OMAP_DMA_CCR_EN) + return 1; + } + return 0; +} + static int __init omap_init_dma(void) { int ch, r; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 10c3f22f9c6..43567d5eddd 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -66,6 +66,7 @@ struct omap_mcbsp { static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT]; static struct clk *mcbsp_dsp_ck = 0; static struct clk *mcbsp_api_ck = 0; +static struct clk *mcbsp_dspxor_ck = 0; static void omap_mcbsp_dump_reg(u8 id) @@ -175,7 +176,7 @@ static int omap_mcbsp_check(unsigned int id) return 0; } - if (cpu_is_omap1510() || cpu_is_omap1610() || cpu_is_omap1710()) { + if (cpu_is_omap1510() || cpu_is_omap16xx()) { if (id > OMAP_MAX_MCBSP_COUNT) { printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1); return -1; @@ -191,15 +192,12 @@ static int omap_mcbsp_check(unsigned int id) static void omap_mcbsp_dsp_request(void) { - if (cpu_is_omap1510() || cpu_is_omap1610() || cpu_is_omap1710()) { - omap_writew((omap_readw(ARM_RSTCT1) | (1 << 1) | (1 << 2)), - ARM_RSTCT1); - clk_enable(mcbsp_dsp_ck); - clk_enable(mcbsp_api_ck); + if (cpu_is_omap1510() || cpu_is_omap16xx()) { + clk_use(mcbsp_dsp_ck); + clk_use(mcbsp_api_ck); /* enable 12MHz clock to mcbsp 1 & 3 */ - __raw_writew(__raw_readw(DSP_IDLECT2) | (1 << EN_XORPCK), - DSP_IDLECT2); + clk_use(mcbsp_dspxor_ck); __raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1, DSP_RSTCT2); } @@ -207,10 +205,13 @@ static void omap_mcbsp_dsp_request(void) static void omap_mcbsp_dsp_free(void) { - /* Useless for now */ + if (cpu_is_omap1510() || cpu_is_omap16xx()) { + clk_unuse(mcbsp_dspxor_ck); + clk_unuse(mcbsp_dsp_ck); + clk_unuse(mcbsp_api_ck); + } } - int omap_mcbsp_request(unsigned int id) { int err; @@ -350,6 +351,73 @@ void omap_mcbsp_stop(unsigned int id) } +/* polled mcbsp i/o operations */ +int omap_mcbsp_pollwrite(unsigned int id, u16 buf) +{ + u32 base = mcbsp[id].io_base; + writew(buf, base + OMAP_MCBSP_REG_DXR1); + /* if frame sync error - clear the error */ + if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) { + /* clear error */ + writew(readw(base + OMAP_MCBSP_REG_SPCR2) & (~XSYNC_ERR), + base + OMAP_MCBSP_REG_SPCR2); + /* resend */ + return -1; + } else { + /* wait for transmit confirmation */ + int attemps = 0; + while (!(readw(base + OMAP_MCBSP_REG_SPCR2) & XRDY)) { + if (attemps++ > 1000) { + writew(readw(base + OMAP_MCBSP_REG_SPCR2) & + (~XRST), + base + OMAP_MCBSP_REG_SPCR2); + udelay(10); + writew(readw(base + OMAP_MCBSP_REG_SPCR2) | + (XRST), + base + OMAP_MCBSP_REG_SPCR2); + udelay(10); + printk(KERN_ERR + " Could not write to McBSP Register\n"); + return -2; + } + } + } + return 0; +} + +int omap_mcbsp_pollread(unsigned int id, u16 * buf) +{ + u32 base = mcbsp[id].io_base; + /* if frame sync error - clear the error */ + if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) { + /* clear error */ + writew(readw(base + OMAP_MCBSP_REG_SPCR1) & (~RSYNC_ERR), + base + OMAP_MCBSP_REG_SPCR1); + /* resend */ + return -1; + } else { + /* wait for recieve confirmation */ + int attemps = 0; + while (!(readw(base + OMAP_MCBSP_REG_SPCR1) & RRDY)) { + if (attemps++ > 1000) { + writew(readw(base + OMAP_MCBSP_REG_SPCR1) & + (~RRST), + base + OMAP_MCBSP_REG_SPCR1); + udelay(10); + writew(readw(base + OMAP_MCBSP_REG_SPCR1) | + (RRST), + base + OMAP_MCBSP_REG_SPCR1); + udelay(10); + printk(KERN_ERR + " Could not read from McBSP Register\n"); + return -2; + } + } + } + *buf = readw(base + OMAP_MCBSP_REG_DRR1); + return 0; +} + /* * IRQ based word transmission. */ @@ -625,10 +693,15 @@ static int __init omap_mcbsp_init(void) return PTR_ERR(mcbsp_dsp_ck); } mcbsp_api_ck = clk_get(0, "api_ck"); - if (IS_ERR(mcbsp_dsp_ck)) { + if (IS_ERR(mcbsp_api_ck)) { printk(KERN_ERR "mcbsp: could not acquire api_ck handle.\n"); return PTR_ERR(mcbsp_api_ck); } + mcbsp_dspxor_ck = clk_get(0, "dspxor_ck"); + if (IS_ERR(mcbsp_dspxor_ck)) { + printk(KERN_ERR "mcbsp: could not acquire dspxor_ck handle.\n"); + return PTR_ERR(mcbsp_dspxor_ck); + } #ifdef CONFIG_ARCH_OMAP730 if (cpu_is_omap730()) { @@ -643,7 +716,7 @@ static int __init omap_mcbsp_init(void) } #endif #if defined(CONFIG_ARCH_OMAP16XX) - if (cpu_is_omap1610() || cpu_is_omap1710()) { + if (cpu_is_omap16xx()) { mcbsp_info = mcbsp_1610; mcbsp_count = ARRAY_SIZE(mcbsp_1610); } diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index cbecd10d0b6..ea7b955b9c8 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -53,19 +53,13 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) return -EINVAL; } - cfg = ®_cfg_table[reg_cfg]; - - /* - * We do a pretty long section here with lock on, but pin muxing - * should only happen on driver init for each driver, so it's not time - * critical. - */ - spin_lock_irqsave(&mux_spin_lock, flags); + cfg = (reg_cfg_set *)®_cfg_table[reg_cfg]; /* Check the mux register in question */ if (cfg->mux_reg) { unsigned tmp1, tmp2; + spin_lock_irqsave(&mux_spin_lock, flags); reg_orig = omap_readl(cfg->mux_reg); /* The mux registers always seem to be 3 bits long */ @@ -80,11 +74,13 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) warn = 1; omap_writel(reg, cfg->mux_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); } /* Check for pull up or pull down selection on 1610 */ if (!cpu_is_omap1510()) { if (cfg->pu_pd_reg && cfg->pull_val) { + spin_lock_irqsave(&mux_spin_lock, flags); pu_pd_orig = omap_readl(cfg->pu_pd_reg); mask = 1 << cfg->pull_bit; @@ -100,11 +96,13 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) pu_pd = pu_pd_orig & ~mask; } omap_writel(pu_pd, cfg->pu_pd_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); } } /* Check for an associated pull down register */ if (cfg->pull_reg) { + spin_lock_irqsave(&mux_spin_lock, flags); pull_orig = omap_readl(cfg->pull_reg); mask = 1 << cfg->pull_bit; @@ -121,6 +119,7 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) } omap_writel(pull, cfg->pull_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); } if (warn) { @@ -149,8 +148,6 @@ omap_cfg_reg(const reg_cfg_t reg_cfg) } #endif - spin_unlock_irqrestore(&mux_spin_lock, flags); - #ifdef CONFIG_OMAP_MUX_ERRORS return warn ? -ETXTBSY : 0; #else diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index ab38e4eb313..25bc4a8dd76 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -326,7 +326,7 @@ static u64 ohci_dmamask = ~(u32)0; static struct resource ohci_resources[] = { { .start = OMAP_OHCI_BASE, - .end = OMAP_OHCI_BASE + 4096, + .end = OMAP_OHCI_BASE + 4096 - 1, .flags = IORESOURCE_MEM, }, { |