diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c | 7 | ||||
-rw-r--r-- | arch/i386/kernel/cpu/cpufreq/longhaul.c | 56 | ||||
-rw-r--r-- | arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c | 2 |
3 files changed, 41 insertions, 24 deletions
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c index ea19d091fd4..57c880bf0bd 100644 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -396,13 +396,13 @@ static int acpi_cpufreq_early_init_acpi(void) */ static int bios_with_sw_any_bug; -static int __init sw_any_bug_found(struct dmi_system_id *d) +static int sw_any_bug_found(struct dmi_system_id *d) { bios_with_sw_any_bug = 1; return 0; } -static struct dmi_system_id __initdata sw_any_bug_dmi_table[] = { +static struct dmi_system_id sw_any_bug_dmi_table[] = { { .callback = sw_any_bug_found, .ident = "Supermicro Server X6DLP", @@ -597,7 +597,6 @@ static struct cpufreq_driver acpi_cpufreq_driver = { .name = "acpi-cpufreq", .owner = THIS_MODULE, .attr = acpi_cpufreq_attr, - .flags = CPUFREQ_STICKY, }; @@ -608,7 +607,7 @@ acpi_cpufreq_init (void) acpi_cpufreq_early_init_acpi(); - return cpufreq_register_driver(&acpi_cpufreq_driver); + return cpufreq_register_driver(&acpi_cpufreq_driver); } diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index f5cc9f5c9ba..7233abe5d69 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -178,11 +178,17 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) safe_halt(); /* Change frequency on next halt or sleep */ wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - ACPI_FLUSH_CPU_CACHE(); - /* Invoke C3 */ - inb(cx_address); - /* Dummy op - must do something useless after P_LVL3 read */ - t = inl(acpi_fadt.xpm_tmr_blk.address); + if (port22_en) { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C1 */ + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 read */ + t = inl(acpi_fadt.xpm_tmr_blk.address); + } /* Disable bus ratio bit */ local_irq_disable(); @@ -567,16 +573,23 @@ static acpi_status longhaul_walk_callback(acpi_handle obj_handle, static int enable_arbiter_disable(void) { struct pci_dev *dev; + int reg; u8 pci_cmd; /* Find PLE133 host bridge */ + reg = 0x78; dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, NULL); + /* Find CLE266 host bridge */ + if (dev == NULL) { + reg = 0x76; + dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_862X_0, NULL); + } if (dev != NULL) { /* Enable access to port 0x22 */ - pci_read_config_byte(dev, 0x78, &pci_cmd); + pci_read_config_byte(dev, reg, &pci_cmd); if ( !(pci_cmd & 1<<7) ) { pci_cmd |= 1<<7; - pci_write_config_byte(dev, 0x78, pci_cmd); + pci_write_config_byte(dev, reg, pci_cmd); } return 1; } @@ -680,20 +693,25 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) if (longhaul_version == TYPE_POWERSAVER) { /* Check ACPI support for C3 state */ cx = &pr->power.states[ACPI_STATE_C3]; - if (cx->address == 0 || - (cx->latency > 1000 && ignore_latency == 0) ) + if (cx->address > 0 && + (cx->latency <= 1000 || ignore_latency != 0) ) { + goto print_support_type; + } + } + /* Check ACPI support for bus master arbiter disable */ + if (!pr->flags.bm_control) { + if (enable_arbiter_disable()) { + port22_en = 1; + } else { goto err_acpi; - - } else { - /* Check ACPI support for bus master arbiter disable */ - if (!pr->flags.bm_control) { - if (!enable_arbiter_disable()) { - printk(KERN_ERR PFX "No ACPI support. No VT8601 host bridge. Aborting.\n"); - return -ENODEV; - } else - port22_en = 1; } } +print_support_type: + if (!port22_en) { + printk (KERN_INFO PFX "Using ACPI support.\n"); + } else { + printk (KERN_INFO PFX "Using northbridge support.\n"); + } ret = longhaul_get_ranges(); if (ret != 0) @@ -716,7 +734,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) return 0; err_acpi: - printk(KERN_ERR PFX "No ACPI support for CPU frequency changes.\n"); + printk(KERN_ERR PFX "No ACPI support. No VT8601 or VT8623 northbridge. Aborting.\n"); return -ENODEV; } diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c index 7a9325349e9..e8993baf3d1 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c @@ -386,7 +386,7 @@ static int centrino_cpu_early_init_acpi(void) * than OS intended it to run at. Detect it and handle it cleanly. */ static int bios_with_sw_any_bug; -static int __init sw_any_bug_found(struct dmi_system_id *d) +static int sw_any_bug_found(struct dmi_system_id *d) { bios_with_sw_any_bug = 1; return 0; |