diff options
Diffstat (limited to 'arch')
636 files changed, 46765 insertions, 5018 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index b0fabfa864f..364c6dadde0 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -59,6 +59,24 @@ config HAVE_KPROBES config HAVE_KRETPROBES def_bool n +# +# An arch should select this if it provides all these things: +# +# task_pt_regs() in asm/processor.h or asm/ptrace.h +# arch_has_single_step() if there is hardware single-step support +# arch_has_block_step() if there is hardware block-step support +# arch_ptrace() and not #define __ARCH_SYS_PTRACE +# compat_arch_ptrace() and #define __ARCH_WANT_COMPAT_SYS_PTRACE +# asm/syscall.h supplying asm-generic/syscall.h interface +# linux/regset.h user_regset interfaces +# CORE_DUMP_USE_REGSET #define'd in linux/elf.h +# TIF_SYSCALL_TRACE calls tracehook_report_syscall_{entry,exit} +# TIF_NOTIFY_RESUME calls tracehook_notify_resume() +# signal delivery calls tracehook_signal_handler() +# +config HAVE_ARCH_TRACEHOOK + def_bool n + config HAVE_DMA_ATTRS def_bool n diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 32ca1b92730..6e943135f0e 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -253,15 +253,15 @@ do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer, } asmlinkage int -osf_statfs(char __user *path, struct osf_statfs __user *buffer, unsigned long bufsiz) +osf_statfs(char __user *pathname, struct osf_statfs __user *buffer, unsigned long bufsiz) { - struct nameidata nd; + struct path path; int retval; - retval = user_path_walk(path, &nd); + retval = user_path(pathname, &path); if (!retval) { - retval = do_osf_statfs(nd.path.dentry, buffer, bufsiz); - path_put(&nd.path); + retval = do_osf_statfs(path.dentry, buffer, bufsiz); + path_put(&path); } return retval; } diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c index 40c15e7301d..234e42b8ee7 100644 --- a/arch/alpha/mm/init.c +++ b/arch/alpha/mm/init.c @@ -94,36 +94,6 @@ __bad_page(void) return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED)); } -#ifndef CONFIG_DISCONTIGMEM -void -show_mem(void) -{ - long i,free = 0,total = 0,reserved = 0; - long shared = 0, cached = 0; - - printk("\nMem-info:\n"); - show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - i = max_mapnr; - while (i-- > 0) { - total++; - if (PageReserved(mem_map+i)) - reserved++; - else if (PageSwapCache(mem_map+i)) - cached++; - else if (!page_count(mem_map+i)) - free++; - else - shared += page_count(mem_map + i) - 1; - } - printk("%ld pages of RAM\n",total); - printk("%ld free pages\n",free); - printk("%ld reserved pages\n",reserved); - printk("%ld pages shared\n",shared); - printk("%ld pages swap cached\n",cached); -} -#endif - static inline unsigned long load_PCB(struct pcb_struct *pcb) { diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c index d8c4ceaf00b..a13de49d126 100644 --- a/arch/alpha/mm/numa.c +++ b/arch/alpha/mm/numa.c @@ -359,38 +359,3 @@ void __init mem_init(void) mem_stress(); #endif } - -void -show_mem(void) -{ - long i,free = 0,total = 0,reserved = 0; - long shared = 0, cached = 0; - int nid; - - printk("\nMem-info:\n"); - show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_online_node(nid) { - unsigned long flags; - pgdat_resize_lock(NODE_DATA(nid), &flags); - i = node_spanned_pages(nid); - while (i-- > 0) { - struct page *page = nid_page_nr(nid, i); - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - } - pgdat_resize_unlock(NODE_DATA(nid), &flags); - } - printk("%ld pages of RAM\n",total); - printk("%ld free pages\n",free); - printk("%ld reserved pages\n",reserved); - printk("%ld pages shared\n",shared); - printk("%ld pages swap cached\n",cached); -} diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dabb015aa40..c8f528284a9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -314,7 +314,7 @@ config ARCH_IOP32X select PLAT_IOP select PCI select GENERIC_GPIO - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Support for Intel's 80219 and IOP32X (XScale) family of processors. @@ -325,7 +325,7 @@ config ARCH_IOP33X select PLAT_IOP select PCI select GENERIC_GPIO - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Support for Intel's IOP33X (XScale) family of processors. @@ -418,7 +418,7 @@ config ARCH_MXC select GENERIC_CLOCKEVENTS select ARCH_MTD_XIP select GENERIC_GPIO - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Support for Freescale MXC/iMX-based family of processors diff --git a/arch/arm/Makefile b/arch/arm/Makefile index b20995a82e0..2f074774423 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -67,7 +67,7 @@ tune-$(CONFIG_CPU_ARM720T) :=-mtune=arm7tdmi tune-$(CONFIG_CPU_ARM740T) :=-mtune=arm7tdmi tune-$(CONFIG_CPU_ARM9TDMI) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM940T) :=-mtune=arm9tdmi -tune-$(CONFIG_CPU_ARM946T) :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi) +tune-$(CONFIG_CPU_ARM946E) :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi) tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index dd294734260..69130f36590 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -280,7 +280,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, /* * Trying to unmap an invalid mapping */ - if (dma_mapping_error(dma_addr)) { + if (dma_mapping_error(dev, dma_addr)) { dev_err(dev, "Trying to unmap invalid mapping\n"); return; } diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index c3c3a333904..85579654d3b 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -331,17 +331,17 @@ static int locomo_gpio_type(unsigned int irq, unsigned int type) mask = 1 << (irq - LOCOMO_IRQ_GPIO_START); - if (type == IRQT_PROBE) { + if (type == IRQ_TYPE_PROBE) { if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) return 0; - type = __IRQT_RISEDGE | __IRQT_FALEDGE; + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } - if (type & __IRQT_RISEDGE) + if (type & IRQ_TYPE_EDGE_RISING) GPIO_IRQ_rising_edge |= mask; else GPIO_IRQ_rising_edge &= ~mask; - if (type & __IRQT_FALEDGE) + if (type & IRQ_TYPE_EDGE_FALLING) GPIO_IRQ_falling_edge |= mask; else GPIO_IRQ_falling_edge &= ~mask; @@ -473,7 +473,7 @@ static void locomo_setup_irq(struct locomo *lchip) /* * Install handler for IRQ_LOCOMO_HW. */ - set_irq_type(lchip->irq, IRQT_FALLING); + set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING); set_irq_chip_data(lchip->irq, irqbase); set_irq_chained_handler(lchip->irq, locomo_handler); diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 0a8e1ff2af8..f6d3fdda706 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -241,14 +241,14 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags) void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ip0; - if (flags == IRQT_PROBE) + if (flags == IRQ_TYPE_PROBE) return 0; - if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0) + if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0) return -EINVAL; ip0 = sa1111_readl(mapbase + SA1111_INTPOL0); - if (flags & __IRQT_RISEDGE) + if (flags & IRQ_TYPE_EDGE_RISING) ip0 &= ~mask; else ip0 |= mask; @@ -338,14 +338,14 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags) void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ip1; - if (flags == IRQT_PROBE) + if (flags == IRQ_TYPE_PROBE) return 0; - if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0) + if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0) return -EINVAL; ip1 = sa1111_readl(mapbase + SA1111_INTPOL1); - if (flags & __IRQT_RISEDGE) + if (flags & IRQ_TYPE_EDGE_RISING) ip1 &= ~mask; else ip1 |= mask; @@ -427,7 +427,7 @@ static void sa1111_setup_irq(struct sa1111 *sachip) /* * Register SA1111 interrupt */ - set_irq_type(sachip->irq, IRQT_RISING); + set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING); set_irq_data(sachip->irq, irqbase); set_irq_chained_handler(sachip->irq, sa1111_irq_handler); } diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig index 493ecee24f9..2307587a38a 100644 --- a/arch/arm/configs/eseries_pxa_defconfig +++ b/arch/arm/configs/eseries_pxa_defconfig @@ -1,15 +1,19 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-hh17 -# Fri Nov 9 20:23:03 2007 +# Linux kernel version: 2.6.26 +# Sat Jul 26 22:28:46 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y @@ -18,75 +22,90 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -100,6 +119,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System Type @@ -111,21 +131,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y # CONFIG_ARCH_RPC is not set @@ -133,80 +158,48 @@ CONFIG_ARCH_PXA=y # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_BOARD_IRQ_MAP_SMALL is not set -CONFIG_BOARD_IRQ_MAP_BIG=y -CONFIG_DMABOUNCE=y +# CONFIG_ARCH_MSM7X00A is not set # -# Intel PXA2xx Implementations +# Intel PXA2xx/PXA3xx Implementations # +# CONFIG_ARCH_GUMSTIX is not set # CONFIG_ARCH_LUBBOCK is not set # CONFIG_MACH_LOGICPD_PXA270 is not set # CONFIG_MACH_MAINSTONE is not set # CONFIG_ARCH_PXA_IDP is not set -CONFIG_TOSHIBA_TMIO_OHCI=y -CONFIG_ARCH_ESERIES=y +# CONFIG_PXA_SHARPSL is not set +CONFIG_ARCH_PXA_ESERIES=y CONFIG_MACH_E330=y +CONFIG_MACH_E350=y CONFIG_MACH_E740=y CONFIG_MACH_E750=y CONFIG_MACH_E400=y CONFIG_MACH_E800=y -CONFIG_E330_LCD=y -CONFIG_E740_LCD=y -CONFIG_E750_LCD=y -CONFIG_E400_LCD=y -CONFIG_E800_LCD=y -CONFIG_ESERIES_UDC=y -CONFIG_E330_TC6387XB=y -CONFIG_E740_T7L66XB=y -CONFIG_E400_T7L66XB=y -CONFIG_E750_E800_TC6393XB=y -CONFIG_E740_PCMCIA=m -CONFIG_E750_PCMCIA=m -CONFIG_E800_PCMCIA=m -# CONFIG_MACH_A620 is not set -# CONFIG_MACH_A716 is not set -# CONFIG_MACH_A730 is not set -# CONFIG_ARCH_H1900 is not set -# CONFIG_ARCH_H2200 is not set -# CONFIG_MACH_H3900 is not set -# CONFIG_MACH_H4000 is not set -# CONFIG_MACH_H4700 is not set -# CONFIG_MACH_HX2750 is not set -# CONFIG_ARCH_H5400 is not set -# CONFIG_MACH_HIMALAYA is not set -# CONFIG_MACH_HTCUNIVERSAL is not set -# CONFIG_MACH_HTCALPINE is not set -# CONFIG_MACH_MAGICIAN is not set -# CONFIG_MACH_HTCAPACHE is not set -# CONFIG_MACH_BLUEANGEL is not set - -# -# HTC_HW6X00 -# -# CONFIG_MACH_HTCBEETLES is not set -# CONFIG_MACH_HW6900 is not set -# CONFIG_MACH_HTCATHENA is not set -# CONFIG_ARCH_AXIMX3 is not set -# CONFIG_ARCH_AXIMX5 is not set -# CONFIG_MACH_X50 is not set -# CONFIG_ARCH_ROVERP1 is not set -# CONFIG_ARCH_ROVERP5P is not set -# CONFIG_MACH_XSCALE_PALMLD is not set -# CONFIG_MACH_T3XSCALE is not set -# CONFIG_MACH_RECON is not set -# CONFIG_MACH_GHI270HG is not set -# CONFIG_MACH_GHI270 is not set -# CONFIG_MACH_LOOXC550 is not set -# CONFIG_PXA_SHARPSL is not set # CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_ARCH_PXA_PALM is not set +# CONFIG_PXA_EZX is not set CONFIG_PXA25x=y +# CONFIG_PXA_PWM is not set + +# +# Boot options +# # -# Linux As Bootloader +# Power management # -# CONFIG_LAB is not set # # Processor Type @@ -215,6 +208,7 @@ CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y @@ -232,11 +226,9 @@ CONFIG_XSCALE_PMU=y # # Bus support # - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=m +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m CONFIG_PCMCIA_LOAD_CIS=y @@ -245,11 +237,14 @@ CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -CONFIG_PCMCIA_PXA2XX=m # # Kernel Features # +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_PREEMPT is not set CONFIG_HZ=100 CONFIG_AEABI=y @@ -262,9 +257,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_ALIGNMENT_TRAP=y # @@ -275,7 +274,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y -# CONFIG_TXTOFFSET_DELTA is not set +CONFIG_ATAGS_PROC=y # # CPU Frequency scaling @@ -304,11 +303,12 @@ CONFIG_BINFMT_MISC=y # Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set -# CONFIG_DPM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking @@ -318,13 +318,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -339,35 +339,40 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -380,10 +385,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -391,15 +392,74 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set +# CONFIG_CAN is not set +CONFIG_IRDA=y + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +CONFIG_IRDA_ULTRA=y + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +CONFIG_PXA_FICP=y +# CONFIG_MCS_FIR is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m -# CONFIG_IEEE80211_CRYPT_CCMP is not set -# CONFIG_IEEE80211_CRYPT_TKIP is not set -# CONFIG_IEEE80211_SOFTMAC is not set -CONFIG_WIRELESS_EXT=y +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -408,38 +468,32 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_PARTITIONS is not set # # User Modules And Translation Layers # -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m +# CONFIG_MTD_CHAR is not set +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set # CONFIG_MTD_BLOCK_RO is not set # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -459,7 +513,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -482,82 +535,43 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_H1900 is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_SHARPSL is not set -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=m -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=m - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=m -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECS is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set @@ -565,7 +579,7 @@ CONFIG_SCSI=m # # SCSI support type (disk, tape, CD-ROM) # -# CONFIG_BLK_DEV_SD is not set +CONFIG_BLK_DEV_SD=m # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set @@ -579,6 +593,7 @@ CONFIG_SCSI=m # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -586,132 +601,78 @@ CONFIG_SCSI=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +CONFIG_ATA=m +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_PMP is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +CONFIG_PATA_PCMCIA=m +# CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_VETH is not set # CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y # CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_HERMES is not set +# CONFIG_LIBERTAS is not set +CONFIG_HERMES=m +CONFIG_PCMCIA_HERMES=m +# CONFIG_PCMCIA_SPECTRUM is not set # CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_WL3501 is not set # CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -# CONFIG_HOSTAP_FIRMWARE is not set -# CONFIG_HOSTAP_CS is not set -# CONFIG_ACX is not set -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -719,38 +680,48 @@ CONFIG_NET_WIRELESS=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_TSDEV=m -CONFIG_INPUT_TSDEV_SCREEN_X=240 -CONFIG_INPUT_TSDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_LED_TRIGGER is not set # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=m # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set -CONFIG_TOUCHSCREEN_WM97XX=m -CONFIG_TOUCHSCREEN_WM9705=y -CONFIG_TOUCHSCREEN_WM9712=y -CONFIG_TOUCHSCREEN_WM9713=y # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set +CONFIG_TOUCHSCREEN_WM97XX=m +CONFIG_TOUCHSCREEN_WM9705=y +CONFIG_TOUCHSCREEN_WM9712=y +CONFIG_TOUCHSCREEN_WM9713=y +# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_INPUT_MISC is not set # @@ -763,9 +734,11 @@ CONFIG_TOUCHSCREEN_WM9713=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -777,25 +750,12 @@ CONFIG_HW_CONSOLE=y # Non-8250 serial port support # # CONFIG_SERIAL_PXA is not set -# CONFIG_RS232_SERIAL is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set -# CONFIG_SA1100_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set -# CONFIG_TIHTC is not set # # PCMCIA character devices @@ -803,117 +763,79 @@ CONFIG_HW_RANDOM=m # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set -# CONFIG_POWER_SUPPLY is not set - -# -# L3 serial bus support -# -# CONFIG_L3 is not set - -# -# Misc devices +# I2C GPIO expanders: # # -# Multimedia Capabilities Port drivers +# PCI GPIO expanders: # -# CONFIG_ADC is not set # -# Compaq/iPAQ Drivers +# SPI GPIO expanders: # +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Compaq/HP iPAQ Drivers +# Sonics Silicon Backplane # -# CONFIG_IPAQ_SLEEVE is not set -# CONFIG_SLEEVE_DEBUG is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +CONFIG_MFD_CORE=y # CONFIG_MFD_SM501 is not set -# CONFIG_HTC_ASIC2 is not set -# CONFIG_HTC_ASIC3 is not set -# CONFIG_HTC_PASIC3 is not set # CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_BBKEYS is not set -# CONFIG_HTC_ASIC3_DS1WM is not set -# CONFIG_SOC_SAMCOP is not set -# CONFIG_SOC_HAMCOP is not set -# CONFIG_SOC_MQ11XX is not set -CONFIG_SOC_T7L66XB=y -# CONFIG_SOC_TC6387XB is not set -CONFIG_SOC_TC6393XB=y -# CONFIG_SOC_TSC2101 is not set -# CONFIG_SOC_TSC2200 is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# +# CONFIG_HTC_PASIC3 is not set +CONFIG_MFD_TC6393XB=y # -# LED Triggers +# Multimedia devices # -# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # -# Multimedia devices +# Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_DAB is not set # # Graphics support # -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CORGI=y +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -923,14 +845,25 @@ CONFIG_FB_CFB_IMAGEBLIT=y # # Frame buffer hardware drivers # -# CONFIG_FB_IMAGEON is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_PXA=y +# CONFIG_FB_PXA_SMARTPANEL is not set # CONFIG_FB_PXA_PARAMETERS is not set # CONFIG_FB_MBX is not set CONFIG_FB_W100=y +# CONFIG_FB_AM200EPD is not set # CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_VSFB is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -938,6 +871,7 @@ CONFIG_FB_W100=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set @@ -945,28 +879,13 @@ CONFIG_FONTS=y # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set -CONFIG_FONT_ACORN_8x8=y -# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# +# CONFIG_LOGO is not set CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -980,125 +899,75 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# +CONFIG_SND_ARM=y # CONFIG_SND_PXA2XX_AC97 is not set -# CONFIG_SND_RECON is not set - -# -# USB devices -# -# CONFIG_SND_USB_AUDIO is not set - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# SoC audio support -# -CONFIG_SND_SOC_AC97_BUS=y +# CONFIG_SND_USB is not set +# CONFIG_SND_PCMCIA is not set CONFIG_SND_SOC=m - -# -# SoC Platforms -# - -# -# SoC Audio for the Atmel AT91 -# - -# -# SoC Audio for the Intel PXA2xx -# +CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_PXA2XX_SOC=m CONFIG_SND_PXA2XX_SOC_AC97=m -CONFIG_SND_PXA2XX_SOC_E740_WM9705=m -CONFIG_SND_PXA2XX_SOC_E750_WM9705=m -CONFIG_SND_PXA2XX_SOC_E800_WM9712=m -# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set -# CONFIG_SND_PXA2XX_SOC_BLUEANGEL is not set -# CONFIG_SND_PXA2XX_SOC_H5000 is not set - -# -# SoC Audio for the Freescale i.MX -# - -# -# SoC Audio for the Samsung S3C24XX -# -# CONFIG_SND_SOC_AC97_CODEC is not set -# CONFIG_SND_SOC_WM8711 is not set -# CONFIG_SND_SOC_WM8510 is not set -# CONFIG_SND_SOC_WM8731 is not set -# CONFIG_SND_SOC_WM8750 is not set -# CONFIG_SND_SOC_WM8753 is not set -# CONFIG_SND_SOC_WM8772 is not set -# CONFIG_SND_SOC_WM8971 is not set -# CONFIG_SND_SOC_WM8956 is not set -# CONFIG_SND_SOC_WM8960 is not set -# CONFIG_SND_SOC_WM8976 is not set -# CONFIG_SND_SOC_WM8974 is not set -# CONFIG_SND_SOC_WM8980 is not set -CONFIG_SND_SOC_WM9705=m -# CONFIG_SND_SOC_WM9713 is not set +CONFIG_SND_PXA2XX_SOC_E800=m CONFIG_SND_SOC_WM9712=m -# CONFIG_SND_SOC_UDA1380 is not set -# CONFIG_SND_SOC_AK4535 is not set - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# HID Devices +# USB Input Devices # -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set # -# USB support +# USB HID Boot Protocol drivers # +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=m -CONFIG_USB_DEBUG=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DYNAMIC_MINORS=y +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1107,68 +976,19 @@ CONFIG_USB_DYNAMIC_MINORS=y # # may also be needed; see USB_STORAGE Help for more information # -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set +CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1192,56 +1012,57 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set -CONFIG_USB_GADGET_PXA2XX=y -CONFIG_USB_PXA2XX=y -# CONFIG_USB_PXA2XX_SMALL is not set +CONFIG_USB_GADGET_PXA25X=y +CONFIG_USB_PXA25X=y +CONFIG_USB_PXA25X_SMALL=y +# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_MQ11XX is not set # CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set # CONFIG_USB_GADGET_DUALSPEED is not set # CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y +CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_CHAR is not set -# CONFIG_USB_PXA2XX_GPIO is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y # -# MMC/SD Card support +# MMC/SD Card Drivers # -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y -# CONFIG_MMC_PXA is not set -CONFIG_MMC_TMIO=y -# CONFIG_MMC_SAMCOP is not set +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# Real Time Clock +# MMC/SD Host Controller Drivers # +# CONFIG_MMC_PXA is not set +# CONFIG_MMC_SDHCI is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems @@ -1255,14 +1076,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1292,7 +1110,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1305,30 +1122,21 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1341,7 +1149,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1363,10 +1170,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1407,30 +1211,32 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set CONFIG_FRAME_POINTER=y +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_USER is not set # @@ -1438,61 +1244,102 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y # -# Cryptographic options +# Crypto core or helper # -CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=m CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Hardware crypto devices +# Compression # +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index 747b9dedab8..dc8b40783d9 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -377,7 +377,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -395,7 +395,7 @@ static struct resource nand_resources[] = { }; static struct platform_device at91cap9_nand_device = { - .name = "at91_nand", + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -404,7 +404,7 @@ static struct platform_device at91cap9_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned long csa, mode; @@ -445,7 +445,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) platform_device_register(&at91cap9_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index de19bee83f7..8ced9bc8209 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -369,7 +369,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -382,7 +382,7 @@ static struct resource nand_resources[] = { }; static struct platform_device at91rm9200_nand_device = { - .name = "at91_nand", + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -391,7 +391,7 @@ static struct platform_device at91rm9200_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned int csa; @@ -429,7 +429,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) platform_device_register(&at91rm9200_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 86cba4ac29b..cae5f52f127 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -284,7 +284,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -302,7 +302,7 @@ static struct resource nand_resources[] = { }; static struct platform_device at91sam9260_nand_device = { - .name = "at91_nand", + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -311,7 +311,7 @@ static struct platform_device at91sam9260_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned long csa, mode; @@ -373,7 +373,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) platform_device_register(&at91sam9260_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index ec1891375df..483d436af22 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -199,7 +199,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -211,8 +211,8 @@ static struct resource nand_resources[] = { } }; -static struct platform_device at91_nand_device = { - .name = "at91_nand", +static struct platform_device atmel_nand_device = { + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -221,7 +221,7 @@ static struct platform_device at91_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned long csa, mode; @@ -262,11 +262,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data) at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */ nand_data = *data; - platform_device_register(&at91_nand_device); + platform_device_register(&atmel_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 8a81f76f020..9762b15f658 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -353,7 +353,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -371,7 +371,7 @@ static struct resource nand_resources[] = { }; static struct platform_device at91sam9263_nand_device = { - .name = "at91_nand", + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -380,7 +380,7 @@ static struct platform_device at91sam9263_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned long csa, mode; @@ -421,7 +421,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) platform_device_register(&at91sam9263_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index ae28101e754..5f3094870ca 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -195,7 +195,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -212,8 +212,8 @@ static struct resource nand_resources[] = { } }; -static struct platform_device at91_nand_device = { - .name = "at91_nand", +static struct platform_device atmel_nand_device = { + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -222,7 +222,7 @@ static struct platform_device at91_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned long csa; @@ -259,11 +259,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data) at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */ nand_data = *data; - platform_device_register(&at91_nand_device); + platform_device_register(&atmel_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index b22a1a00405..af2c33aff1a 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -142,7 +142,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return cam60_nand_partition; } -static struct at91_nand_data __initdata cam60_nand_data = { +static struct atmel_nand_data __initdata cam60_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not there diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 8a2a958639d..117cf6c9afc 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -181,7 +181,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return cap9adk_nand_partitions; } -static struct at91_nand_data __initdata cap9adk_nand_data = { +static struct atmel_nand_data __initdata cap9adk_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected @@ -330,10 +330,10 @@ static void __init cap9adk_board_init(void) /* Serial */ at91_add_device_serial(); /* USB Host */ - set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH); + set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH); at91_add_device_usbh(&cap9adk_usbh_data); /* USB HS */ - set_irq_type(AT91CAP9_ID_UDPHS, IRQT_HIGH); + set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH); at91_add_device_usba(&cap9adk_usba_udc_data); /* SPI */ at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices)); @@ -350,7 +350,7 @@ static void __init cap9adk_board_init(void) /* I2C */ at91_add_device_i2c(NULL, 0); /* LCD Controller */ - set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH); + set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH); at91_add_device_lcdc(&cap9adk_lcdc_data); /* AC97 */ at91_add_device_ac97(&cap9adk_ac97_data); diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c index dab958d2592..02a70b2f355 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-dk.c @@ -147,7 +147,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return dk_nand_partition; } -static struct at91_nand_data __initdata dk_nand_data = { +static struct atmel_nand_data __initdata dk_nand_data = { .ale = 22, .cle = 21, .det_pin = AT91_PIN_PB1, diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index cb065febd95..082ed59365a 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -105,7 +105,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return kb9202_nand_partition; } -static struct at91_nand_data __initdata kb9202_nand_data = { +static struct atmel_nand_data __initdata kb9202_nand_data = { .ale = 22, .cle = 21, // .det_pin = ... not there diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 8f76af5e219..57a6221943e 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -141,7 +141,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 4d1d9c77708..6a680795c3c 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -178,7 +178,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 08382c0df22..43dfbd0d543 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -183,7 +183,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 22, .cle = 21, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index b4cd5d0ed59..6605a098011 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -187,7 +187,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index b6a70fc735c..66e77bb2e07 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -96,7 +96,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 7079050ab88..bbbfd06f5e0 100755..100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -180,7 +180,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return yl9200_nand_partition; } -static struct at91_nand_data __initdata yl9200_nand_data = { +static struct atmel_nand_data __initdata yl9200_nand_data = { .ale = 6, .cle = 7, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 78a5cdb746d..ca87587b2b4 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -56,19 +56,19 @@ static int at91_aic_set_type(unsigned irq, unsigned type) unsigned int smr, srctype; switch (type) { - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: srctype = AT91_AIC_SRCTYPE_HIGH; break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: srctype = AT91_AIC_SRCTYPE_RISING; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_LOW; else return -EINVAL; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_FALLING; else diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 1d7bca6aa44..5fed5760850 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -226,7 +226,7 @@ static void ep93xx_gpio_irq_ack(unsigned int irq) int port = line >> 3; int port_mask = 1 << (line & 7); - if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { + if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { gpio_int_type2[port] ^= port_mask; /* switch edge direction */ ep93xx_gpio_update_int_params(port); } @@ -240,7 +240,7 @@ static void ep93xx_gpio_irq_mask_ack(unsigned int irq) int port = line >> 3; int port_mask = 1 << (line & 7); - if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) + if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) gpio_int_type2[port] ^= port_mask; /* switch edge direction */ gpio_int_unmasked[port] &= ~port_mask; @@ -283,27 +283,27 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) gpio_direction_input(gpio); switch (type) { - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: gpio_int_type1[port] |= port_mask; gpio_int_type2[port] |= port_mask; desc->handle_irq = handle_edge_irq; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: gpio_int_type1[port] |= port_mask; gpio_int_type2[port] &= ~port_mask; desc->handle_irq = handle_edge_irq; break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: gpio_int_type1[port] &= ~port_mask; gpio_int_type2[port] |= port_mask; desc->handle_irq = handle_level_irq; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: gpio_int_type1[port] &= ~port_mask; gpio_int_type2[port] &= ~port_mask; desc->handle_irq = handle_level_irq; break; - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: gpio_int_type1[port] |= port_mask; /* set initial polarity based on current input level */ if (gpio_get_value(gpio)) diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c index e6695c4e623..e1b1f028b93 100644 --- a/arch/arm/mach-imx/irq.c +++ b/arch/arm/mach-imx/irq.c @@ -111,7 +111,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type) reg = irq >> 5; bit = 1 << (irq % 32); - if (type == IRQT_PROBE) { + if (type == IRQ_TYPE_PROBE) { /* Don't mess with enabled GPIOs using preconfigured edges or GPIOs set to alternate function during probe */ /* TODO: support probe */ @@ -120,7 +120,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type) // return 0; // if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2))) // return 0; -// type = __IRQT_RISEDGE | __IRQT_FALEDGE; +// type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } GIUS(reg) |= bit; @@ -128,19 +128,19 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type) DEBUG_IRQ("setting type of irq %d to ", _irq); - if (type & __IRQT_RISEDGE) { + if (type & IRQ_TYPE_EDGE_RISING) { DEBUG_IRQ("rising edges\n"); irq_type = 0x0; } - if (type & __IRQT_FALEDGE) { + if (type & IRQ_TYPE_EDGE_FALLING) { DEBUG_IRQ("falling edges\n"); irq_type = 0x1; } - if (type & __IRQT_LOWLVL) { + if (type & IRQ_TYPE_LEVEL_LOW) { DEBUG_IRQ("low level\n"); irq_type = 0x3; } - if (type & __IRQT_HIGHLVL) { + if (type & IRQ_TYPE_LEVEL_HIGH) { DEBUG_IRQ("high level\n"); irq_type = 0x2; } diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 81cdc826720..daf28074134 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -329,19 +329,19 @@ static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type) /* * Then, set the proper trigger type. */ - if (type & IRQT_FALLING) + if (type & IRQ_TYPE_EDGE_FALLING) GPIO_IRQ_falling_edge |= 1 << line; else GPIO_IRQ_falling_edge &= ~(1 << line); - if (type & IRQT_RISING) + if (type & IRQ_TYPE_EDGE_RISING) GPIO_IRQ_rising_edge |= 1 << line; else GPIO_IRQ_rising_edge &= ~(1 << line); - if (type & IRQT_LOW) + if (type & IRQ_TYPE_LEVEL_LOW) GPIO_IRQ_level_low |= 1 << line; else GPIO_IRQ_level_low &= ~(1 << line); - if (type & IRQT_HIGH) + if (type & IRQ_TYPE_LEVEL_HIGH) GPIO_IRQ_level_high |= 1 << line; else GPIO_IRQ_level_high &= ~(1 << line); diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index 5fea5a13293..df16a4eac49 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -126,23 +126,23 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type) return -EINVAL; switch (type) { - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL; irq_type = IXP23XX_IRQ_EDGE; break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: int_style = IXP23XX_GPIO_STYLE_RISING_EDGE; irq_type = IXP23XX_IRQ_EDGE; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE; irq_type = IXP23XX_IRQ_EDGE; break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH; irq_type = IXP23XX_IRQ_LEVEL; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW; irq_type = IXP23XX_IRQ_LEVEL; break; diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c index f0f70ba1e46..896ff9f840d 100644 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -110,8 +110,8 @@ static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) static void __init roadrunner_pci_preinit(void) { - set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW); - set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW); + set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW); ixp23xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c index 3f867691d9f..c6e044befcc 100644 --- a/arch/arm/mach-ixp4xx/avila-pci.c +++ b/arch/arm/mach-ixp4xx/avila-pci.c @@ -30,10 +30,10 @@ void __init avila_pci_preinit(void) { - set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW); - set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW); + set_irq_type(IRQ_AVILA_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_AVILA_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_AVILA_PCI_INTC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_AVILA_PCI_INTD, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 3781b3db9f4..3947c506b4f 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -142,23 +142,23 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) return -EINVAL; switch (type){ - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; irq_type = IXP4XX_IRQ_EDGE; break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; irq_type = IXP4XX_IRQ_EDGE; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; irq_type = IXP4XX_IRQ_EDGE; break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; irq_type = IXP4XX_IRQ_LEVEL; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; irq_type = IXP4XX_IRQ_LEVEL; break; diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c index ad2e5b97966..be4f4a208b9 100644 --- a/arch/arm/mach-ixp4xx/coyote-pci.c +++ b/arch/arm/mach-ixp4xx/coyote-pci.c @@ -27,8 +27,8 @@ void __init coyote_pci_preinit(void) { - set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW); - set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW); + set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c index 9db7e1f4201..926d15f885f 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-pci.c +++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c @@ -25,12 +25,12 @@ void __init dsmg600_pci_preinit(void) { - set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTD, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTE, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTF, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c index f19f3f6feda..ca12a9ca083 100644 --- a/arch/arm/mach-ixp4xx/fsg-pci.c +++ b/arch/arm/mach-ixp4xx/fsg-pci.c @@ -25,9 +25,9 @@ void __init fsg_pci_preinit(void) { - set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW); + set_irq_type(IRQ_FSG_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_FSG_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_FSG_PCI_INTC, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c index 6abf568322d..afd1dc14e59 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-pci.c +++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c @@ -29,8 +29,8 @@ void __init gateway7001_pci_preinit(void) { - set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW); - set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW); + set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c index 49dec786880..20960704183 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c @@ -41,10 +41,10 @@ */ void __init gtwx5715_pci_preinit(void) { - set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQT_LOW); - set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQT_LOW); - set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQT_LOW); - set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQT_LOW); + set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c index 40879600481..7d9bb4d2310 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c @@ -27,10 +27,10 @@ void __init ixdp425_pci_preinit(void) { - set_irq_type(IRQ_IXDP425_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_IXDP425_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW); - set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTD, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c index d1e75b7dc3b..37d9f2e8f60 100644 --- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c @@ -25,8 +25,8 @@ void __init ixdpg425_pci_preinit(void) { - set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW); - set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW); + set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c index b8ebaf4a9c8..1088426fdce 100644 --- a/arch/arm/mach-ixp4xx/nas100d-pci.c +++ b/arch/arm/mach-ixp4xx/nas100d-pci.c @@ -24,11 +24,11 @@ void __init nas100d_pci_preinit(void) { - set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTD, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTE, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c index 04661fef97f..4429b8448b6 100644 --- a/arch/arm/mach-ixp4xx/nslu2-pci.c +++ b/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -24,9 +24,9 @@ void __init nslu2_pci_preinit(void) { - set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTC, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c index 6588f2c758e..0f00feab67f 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-pci.c +++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c @@ -29,8 +29,8 @@ void __init wg302v2_pci_preinit(void) { - set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW); - set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW); + set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c index 4c3ab43e104..0b06941a1ee 100644 --- a/arch/arm/mach-ks8695/irq.c +++ b/arch/arm/mach-ks8695/irq.c @@ -72,21 +72,21 @@ static int ks8695_irq_set_type(unsigned int irqno, unsigned int type) ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC); switch (type) { - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: mode = IOPC_TM_HIGH; level_triggered = 1; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: mode = IOPC_TM_LOW; level_triggered = 1; break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: mode = IOPC_TM_RISING; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: mode = IOPC_TM_FALLING; break; - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: mode = IOPC_TM_EDGE; break; default: diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c index fd7537f7d11..99d4fb19a08 100644 --- a/arch/arm/mach-netx/generic.c +++ b/arch/arm/mach-netx/generic.c @@ -99,19 +99,19 @@ netx_hif_irq_type(unsigned int _irq, unsigned int type) irq = _irq - NETX_IRQ_HIF_CHAINED(0); - if (type & __IRQT_RISEDGE) { + if (type & IRQ_TYPE_EDGE_RISING) { DEBUG_IRQ("rising edges\n"); val |= (1 << 26) << irq; } - if (type & __IRQT_FALEDGE) { + if (type & IRQ_TYPE_EDGE_FALLING) { DEBUG_IRQ("falling edges\n"); val &= ~((1 << 26) << irq); } - if (type & __IRQT_LOWLVL) { + if (type & IRQ_TYPE_LEVEL_LOW) { DEBUG_IRQ("low level\n"); val &= ~((1 << 26) << irq); } - if (type & __IRQT_HIGHLVL) { + if (type & IRQ_TYPE_LEVEL_HIGH) { DEBUG_IRQ("high level\n"); val |= (1 << 26) << irq; } diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 845c66371ca..41f94f6fc15 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -288,7 +288,7 @@ static void __init osk_init_cf(void) return; } /* the CF I/O IRQ is really active-low */ - set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING); + set_irq_type(OMAP_GPIO_IRQ(62), IRQ_TYPE_EDGE_FALLING); } static void __init osk_init_irq(void) @@ -483,7 +483,7 @@ static void __init osk_mistral_init(void) omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */ gpio_request(4, "ts_int"); gpio_direction_input(4); - set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING); + set_irq_type(OMAP_GPIO_IRQ(4), IRQ_TYPE_EDGE_FALLING); spi_register_board_info(mistral_boardinfo, ARRAY_SIZE(mistral_boardinfo)); @@ -494,7 +494,7 @@ static void __init osk_mistral_init(void) int ret = 0; gpio_direction_input(OMAP_MPUIO(2)); - set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQ_TYPE_EDGE_RISING); #ifdef CONFIG_PM /* share the IRQ in case someone wants to use the * button for more than wakeup from system sleep. diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index e020c277460..34389b63b0e 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -298,11 +298,11 @@ palmz71_powercable(int irq, void *dev_id) if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) { printk(KERN_INFO "PM: Power cable connected\n"); set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), - IRQT_FALLING); + IRQ_TYPE_EDGE_FALLING); } else { printk(KERN_INFO "PM: Power cable disconnected\n"); set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), - IRQT_RISING); + IRQ_TYPE_EDGE_RISING); } return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 5c00b3f39cd..8948d45a276 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -186,10 +186,10 @@ static void __init voiceblue_init(void) omap_request_gpio(13); omap_request_gpio(14); omap_request_gpio(15); - set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING); - set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING); - set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING); - set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(12), IRQ_TYPE_EDGE_RISING); + set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING); + set_irq_type(OMAP_GPIO_IRQ(14), IRQ_TYPE_EDGE_RISING); + set_irq_type(OMAP_GPIO_IRQ(15), IRQ_TYPE_EDGE_RISING); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); omap_board_config = voiceblue_config; diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 0cf62ef5ecb..d963125ed75 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -181,7 +181,7 @@ void omap1510_fpga_init_irq(void) */ omap_request_gpio(13); omap_set_gpio_direction(13, 1); - set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING); set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); } diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 620fa0f120e..870b34972d3 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -337,17 +337,17 @@ static void __init apollon_sw_init(void) omap_request_gpio(SW_DOWN_GPIO58); omap_set_gpio_direction(SW_DOWN_GPIO58, 1); - set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING); if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt, IRQF_SHARED, "enter sw", &apollon_sw_interrupt)) return; - set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING); if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt, IRQF_SHARED, "up sw", &apollon_sw_interrupt)) return; - set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING); if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt, IRQF_SHARED, "down sw", &apollon_sw_interrupt)) diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index 88405e74e5e..40a0bee4fbb 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -213,7 +213,7 @@ void __init db88f5281_pci_preinit(void) pin = DB88F5281_PCI_SLOT0_IRQ_PIN; if (gpio_request(pin, "PCI Int1") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "db88f5281_pci_preinit faield to " "set_irq_type pin %d\n", pin); @@ -226,7 +226,7 @@ void __init db88f5281_pci_preinit(void) pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN; if (gpio_request(pin, "PCI Int2") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "db88f5281_pci_preinit faield " "to set_irq_type pin %d\n", pin); diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index e2a0084ab4a..9ae3f6dc783 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -91,27 +91,27 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type) desc = irq_desc + irq; switch (type) { - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: desc->handle_irq = handle_level_irq; desc->status |= IRQ_LEVEL; orion5x_clrbits(GPIO_IN_POL, (1 << pin)); break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: desc->handle_irq = handle_level_irq; desc->status |= IRQ_LEVEL; orion5x_setbits(GPIO_IN_POL, (1 << pin)); break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: desc->handle_irq = handle_edge_irq; desc->status &= ~IRQ_LEVEL; orion5x_clrbits(GPIO_IN_POL, (1 << pin)); break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: desc->handle_irq = handle_edge_irq; desc->status &= ~IRQ_LEVEL; orion5x_setbits(GPIO_IN_POL, (1 << pin)); break; - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: desc->handle_irq = handle_edge_irq; desc->status &= ~IRQ_LEVEL; /* @@ -156,7 +156,7 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (cause & (1 << pin)) { irq = gpio_to_irq(pin); desc = irq_desc + irq; - if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { + if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { /* Swap polarity (race with GPIO line) */ u32 polarity = readl(GPIO_IN_POL); polarity ^= 1 << pin; diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 10ae6286426..2a46d27209c 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -148,7 +148,7 @@ void __init rd88f5182_pci_preinit(void) pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; if (gpio_request(pin, "PCI IntA") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "rd88f5182_pci_preinit faield to " "set_irq_type pin %d\n", pin); @@ -161,7 +161,7 @@ void __init rd88f5182_pci_preinit(void) pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; if (gpio_request(pin, "PCI IntB") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "rd88f5182_pci_preinit faield to " "set_irq_type pin %d\n", pin); diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index a9cef9703d5..f270ada2def 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -117,7 +117,7 @@ void __init qnap_ts209_pci_preinit(void) pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN; if (gpio_request(pin, "PCI Int1") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "qnap_ts209_pci_preinit failed to " "set_irq_type pin %d\n", pin); @@ -131,7 +131,7 @@ void __init qnap_ts209_pci_preinit(void) pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN; if (gpio_request(pin, "PCI Int2") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "qnap_ts209_pci_preinit failed " "to set_irq_type pin %d\n", pin); diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c index 968d0b02759..5ed67e1947a 100644 --- a/arch/arm/mach-pnx4008/irq.c +++ b/arch/arm/mach-pnx4008/irq.c @@ -56,28 +56,28 @@ static void pnx4008_mask_ack_irq(unsigned int irq) static int pnx4008_set_irq_type(unsigned int irq, unsigned int type) { switch (type) { - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */ __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /*rising edge */ set_irq_handler(irq, handle_edge_irq); break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */ __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*falling edge */ set_irq_handler(irq, handle_edge_irq); break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */ __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*low level */ set_irq_handler(irq, handle_level_irq); break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */ __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /* high level */ set_irq_handler(irq, handle_level_irq); break; - /* IRQT_BOTHEDGE is not supported */ + /* IRQ_TYPE_EDGE_BOTH is not supported */ default: printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type); return -1; diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c index bcf0cde6ccc..31f5bd411ce 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.c +++ b/arch/arm/mach-pxa/cm-x270-pci.c @@ -71,7 +71,7 @@ void __cmx270_pci_init_irq(int irq_gpio) cmx270_it8152_irq_gpio = irq_gpio; - set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING); + set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING); set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux); } diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index cc1c4fa0614..8d1ab54e7b2 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -113,7 +113,7 @@ static void __init lpd270_init_irq(void) set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); - set_irq_type(IRQ_GPIO(0), IRQT_FALLING); + set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); } diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index ac26423cd20..af7375bb46a 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -152,7 +152,7 @@ static void __init lubbock_init_irq(void) } set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler); - set_irq_type(IRQ_GPIO(0), IRQT_FALLING); + set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 851ec2d9b69..c8e38b5ff1c 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -191,7 +191,7 @@ static void __init mainstone_init_irq(void) MST_INTSETCLR = 0; set_irq_chained_handler(IRQ_GPIO(0), mainstone_irq_handler); - set_irq_type(IRQ_GPIO(0), IRQT_FALLING); + set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 34cd585075b..23e9b928330 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -146,18 +146,18 @@ void sharpsl_pm_pxa_init(void) if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin)); } - else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE); + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH); if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock)); } - else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING); + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING); if (sharpsl_pm.machinfo->gpio_fatal) { if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal)); } - else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING); + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING); } if (sharpsl_pm.machinfo->batfull_irq) @@ -166,7 +166,7 @@ void sharpsl_pm_pxa_init(void) if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull)); } - else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING); + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING); } } diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index dee7bf36f01..12811b7aea0 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -122,7 +122,7 @@ static struct resource dm9000_resources[] = { [2] = { .start = TRIZEPS4_ETH_IRQ, .end = TRIZEPS4_ETH_IRQ, - .flags = (IORESOURCE_IRQ | IRQT_RISING), + .flags = (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING), }, }; diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index 31afe50d7cd..56d3ee01baa 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -96,7 +96,7 @@ static struct resource cerf_flash_resource = { static void __init cerf_init_irq(void) { sa1100_init_irq(); - set_irq_type(CERF_ETH_IRQ, IRQT_RISING); + set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING); } static struct map_desc cerf_io_desc[] __initdata = { diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 8473c37b77d..b34ff42bbd7 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -834,7 +834,7 @@ static void __init h3800_init_irq(void) set_irq_chip(irq, &h3800_gpio_irqchip); } #endif - set_irq_type(IRQ_GPIO_H3800_ASIC, IRQT_RISING); + set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING); set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux); } diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index fa0403af7ee..c5e438b12ec 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -46,17 +46,17 @@ static int sa1100_gpio_type(unsigned int irq, unsigned int type) else mask = GPIO11_27_MASK(irq); - if (type == IRQT_PROBE) { + if (type == IRQ_TYPE_PROBE) { if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) return 0; - type = __IRQT_RISEDGE | __IRQT_FALEDGE; + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } - if (type & __IRQT_RISEDGE) { + if (type & IRQ_TYPE_EDGE_RISING) { GPIO_IRQ_rising_edge |= mask; } else GPIO_IRQ_rising_edge &= ~mask; - if (type & __IRQT_FALEDGE) { + if (type & IRQ_TYPE_EDGE_FALLING) { GPIO_IRQ_falling_edge |= mask; } else GPIO_IRQ_falling_edge &= ~mask; diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 9f1ed150930..967a48454f6 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -151,7 +151,7 @@ static int __devinit neponset_probe(struct platform_device *dev) /* * Install handler for GPIO25. */ - set_irq_type(IRQ_GPIO25, IRQT_RISING); + set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING); set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler); /* diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index c7bf7e0038f..69a71f11625 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -143,7 +143,7 @@ static void __init pleb_map_io(void) GPDR &= ~GPIO_ETH0_IRQ; - set_irq_type(GPIO_ETH0_IRQ, IRQT_FALLING); + set_irq_type(GPIO_ETH0_IRQ, IRQ_TYPE_EDGE_FALLING); } MACHINE_START(PLEB, "PLEB") diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index fbfa2605844..a8ec97b4752 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -37,7 +37,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address) pgd_t *pgd; pmd_t *pmd; pte_t *pte, entry; - int ret = 0; + int ret; pgd = pgd_offset(vma->vm_mm, address); if (pgd_none(*pgd)) @@ -55,15 +55,19 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address) entry = *pte; /* + * If this page is present, it's actually being shared. + */ + ret = pte_present(entry); + + /* * If this page isn't present, or is already setup to * fault (ie, is old), we can safely ignore any issues. */ - if (pte_present(entry) && pte_val(entry) & shared_pte_mask) { + if (ret && pte_val(entry) & shared_pte_mask) { flush_cache_page(vma, address, pte_pfn(entry)); pte_val(entry) &= ~shared_pte_mask; set_pte_at(vma->vm_mm, address, pte, entry); flush_tlb_page(vma, address); - ret = 1; } pte_unmap(pte); return ret; diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index 4a7736717d8..318b268f938 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -73,19 +73,19 @@ static int gpio_set_irq_type(u32 irq, u32 type) void __iomem *reg = port->base; switch (type) { - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: edge = GPIO_INT_RISE_EDGE; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: edge = GPIO_INT_FALL_EDGE; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: edge = GPIO_INT_LOW_LEV; break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: edge = GPIO_INT_HIGH_LEV; break; - default: /* this includes IRQT_BOTHEDGE */ + default: /* this includes IRQ_TYPE_EDGE_BOTH */ return -EINVAL; } diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index d8e9c2c3f0f..63e094342ef 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -517,13 +517,13 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, u32 gpio_bit = 1 << gpio; MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & __IRQT_LOWLVL); + trigger & IRQ_TYPE_LEVEL_LOW); MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & __IRQT_HIGHLVL); + trigger & IRQ_TYPE_LEVEL_HIGH); MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & __IRQT_RISEDGE); + trigger & IRQ_TYPE_EDGE_RISING); MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & __IRQT_FALEDGE); + trigger & IRQ_TYPE_EDGE_FALLING); if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { if (trigger != 0) @@ -555,9 +555,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; l = __raw_readl(reg); - if (trigger & __IRQT_RISEDGE) + if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; - else if (trigger & __IRQT_FALEDGE) + else if (trigger & IRQ_TYPE_EDGE_FALLING) l &= ~(1 << gpio); else goto bad; @@ -567,9 +567,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (trigger & __IRQT_RISEDGE) + if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; - else if (trigger & __IRQT_FALEDGE) + else if (trigger & IRQ_TYPE_EDGE_FALLING) l &= ~(1 << gpio); else goto bad; @@ -584,9 +584,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) gpio &= 0x07; l = __raw_readl(reg); l &= ~(3 << (gpio << 1)); - if (trigger & __IRQT_RISEDGE) + if (trigger & IRQ_TYPE_EDGE_RISING) l |= 2 << (gpio << 1); - if (trigger & __IRQT_FALEDGE) + if (trigger & IRQ_TYPE_EDGE_FALLING) l |= 1 << (gpio << 1); if (trigger) /* Enable wake-up during idle for dynamic tick */ @@ -599,9 +599,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (trigger & __IRQT_RISEDGE) + if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; - else if (trigger & __IRQT_FALEDGE) + else if (trigger & IRQ_TYPE_EDGE_FALLING) l &= ~(1 << gpio); else goto bad; @@ -887,7 +887,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio) _set_gpio_direction(bank, get_gpio_index(gpio), 1); _set_gpio_irqenable(bank, gpio, 0); _clear_gpio_irqstatus(bank, gpio); - _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); } /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ @@ -924,7 +924,7 @@ int omap_request_gpio(int gpio) /* Set trigger to none. You need to enable the desired trigger with * request_irq() or set_irq_type(). */ - _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); #ifdef CONFIG_ARCH_OMAP15XX if (bank->method == METHOD_GPIO_1510) { diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 5e28c217b8c..0af3872fb76 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -9,7 +9,7 @@ config PLAT_S3C24XX depends on ARCH_S3C2410 default y if ARCH_S3C2410 select NO_IOPORT - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Base platform code for any Samsung S3C24XX device diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 60f162dc4fa..8c5e656d5d8 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1304,7 +1304,7 @@ struct sysdev_class dma_sysclass = { /* kmem cache implementation */ -static void s3c2410_dma_cache_ctor(struct kmem_cache *c, void *p) +static void s3c2410_dma_cache_ctor(void *p) { memset(p, 0, sizeof(struct s3c2410_dma_buf)); } diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index ae2c5d7efc9..001436c04b1 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -292,27 +292,27 @@ s3c_irqext_type(unsigned int irq, unsigned int type) /* Set the external interrupt to pointed trigger type */ switch (type) { - case IRQT_NOEDGE: + case IRQ_TYPE_NONE: printk(KERN_WARNING "No edge setting!\n"); break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: newvalue = S3C2410_EXTINT_RISEEDGE; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: newvalue = S3C2410_EXTINT_FALLEDGE; break; - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: newvalue = S3C2410_EXTINT_BOTHEDGE; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: newvalue = S3C2410_EXTINT_LOWLEV; break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: newvalue = S3C2410_EXTINT_HILEV; break; diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig index af90b00100f..8dc48214f0b 100644 --- a/arch/avr32/boards/atstk1000/Kconfig +++ b/arch/avr32/boards/atstk1000/Kconfig @@ -18,6 +18,10 @@ config BOARD_ATSTK1004 bool "ATSTK1004" select CPU_AT32AP7002 +config BOARD_ATSTK1006 + bool "ATSTK1006" + select CPU_AT32AP7000 + endchoice diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile index beead86462e..edecee03742 100644 --- a/arch/avr32/boards/atstk1000/Makefile +++ b/arch/avr32/boards/atstk1000/Makefile @@ -2,3 +2,4 @@ obj-y += setup.o flash.o obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o +obj-$(CONFIG_BOARD_ATSTK1006) += atstk1002.o diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index e11659b732f..8538ba75ef9 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -1,7 +1,7 @@ /* - * ATSTK1002 daughterboard-specific init code + * ATSTK1002/ATSTK1006 daughterboard-specific init code * - * Copyright (C) 2005-2006 Atmel Corporation + * Copyright (C) 2005-2007 Atmel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -21,6 +21,8 @@ #include <asm/io.h> #include <asm/setup.h> +#include <asm/atmel-mci.h> + #include <asm/arch/at32ap700x.h> #include <asm/arch/board.h> #include <asm/arch/init.h> @@ -35,6 +37,74 @@ unsigned long at32_board_osc_rates[3] = { [2] = 12000000, /* 12 MHz on osc1 */ }; +/* + * The ATSTK1006 daughterboard is very similar to the ATSTK1002. Both + * have the AT32AP7000 chip on board; the difference is that the + * STK1006 has 128 MB SDRAM (the STK1002 uses the 8 MB SDRAM chip on + * the STK1000 motherboard) and 256 MB NAND flash (the STK1002 has + * none.) + * + * The RAM difference is handled by the boot loader, so the only + * difference we end up handling here is the NAND flash. + */ +#ifdef CONFIG_BOARD_ATSTK1006 +#include <linux/mtd/partitions.h> +#include <asm/arch/smc.h> + +static struct smc_timing nand_timing __initdata = { + .ncs_read_setup = 0, + .nrd_setup = 10, + .ncs_write_setup = 0, + .nwe_setup = 10, + + .ncs_read_pulse = 30, + .nrd_pulse = 15, + .ncs_write_pulse = 30, + .nwe_pulse = 15, + + .read_cycle = 30, + .write_cycle = 30, + + .ncs_read_recover = 0, + .nrd_recover = 15, + .ncs_write_recover = 0, + /* WE# high -> RE# low min 60 ns */ + .nwe_recover = 50, +}; + +static struct smc_config nand_config __initdata = { + .bus_width = 1, + .nrd_controlled = 1, + .nwe_controlled = 1, + .nwait_mode = 0, + .byte_write = 0, + .tdf_cycles = 2, + .tdf_mode = 0, +}; + +static struct mtd_partition nand_partitions[] = { + { + .name = "main", + .offset = 0x00000000, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition *nand_part_info(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(nand_partitions); + return nand_partitions; +} + +struct atmel_nand_data atstk1006_nand_data __initdata = { + .cle = 21, + .ale = 22, + .rdy_pin = GPIO_PIN_PB(30), + .enable_pin = GPIO_PIN_PB(29), + .partition_info = nand_part_info, +}; +#endif + struct eth_addr { u8 addr[6]; }; @@ -192,6 +262,21 @@ void __init setup_board(void) at32_setup_serial_console(0); } +#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM + +/* MMC card detect requires MACB0 *NOT* be used */ +#ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM +static struct mci_platform_data __initdata mci0_data = { + .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */ + .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */ +}; +#define MCI_PDATA &mci0_data +#else +#define MCI_PDATA NULL +#endif /* SW6 for sd{cd,wp} routing */ + +#endif /* SW2 for MMC signal routing */ + static int __init atstk1002_init(void) { /* @@ -218,6 +303,12 @@ static int __init atstk1002_init(void) at32_add_system_devices(); +#ifdef CONFIG_BOARD_ATSTK1006 + smc_set_timing(&nand_config, &nand_timing); + smc_set_configuration(3, &nand_config); + at32_add_device_nand(0, &atstk1006_nand_data); +#endif + #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM at32_add_device_usart(1); #else @@ -235,7 +326,7 @@ static int __init atstk1002_init(void) at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif #ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM - at32_add_device_mci(0, NULL); + at32_add_device_mci(0, MCI_PDATA); #endif #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM set_hw_addr(at32_add_device_eth(1, ð_data[1])); diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c index ea109f435a8..591fc73b554 100644 --- a/arch/avr32/boards/atstk1000/atstk1003.c +++ b/arch/avr32/boards/atstk1000/atstk1003.c @@ -154,7 +154,7 @@ static int __init atstk1003_init(void) at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_add_device_mci(0); + at32_add_device_mci(0, NULL); #endif at32_add_device_usba(0, NULL); #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c index c7236df74d7..d9c5e0a2125 100644 --- a/arch/avr32/boards/atstk1000/atstk1004.c +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -137,7 +137,7 @@ static int __init atstk1004_init(void) at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_add_device_mci(0); + at32_add_device_mci(0, NULL); #endif at32_add_device_lcdc(0, &atstk1000_lcdc_data, fbmem_start, fbmem_size, 0); diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index abd954fb7ba..7e7f32771ae 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -43,6 +43,9 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evdev = dev_id; + if (unlikely(!(intc_get_pending(0) & 1))) + return IRQ_NONE; + /* * Disable the interrupt until the clockevent subsystem * reprograms it. @@ -55,7 +58,8 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) static struct irqaction timer_irqaction = { .handler = timer_interrupt, - .flags = IRQF_TIMER | IRQF_DISABLED, + /* Oprofile uses the same irq as the timer, so allow it to be shared */ + .flags = IRQF_TIMER | IRQF_DISABLED | IRQF_SHARED, .name = "avr32_comparator", }; diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 604f44f5dd1..1617048c86c 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/spi/spi.h> #include <linux/usb/atmel_usba_udc.h> @@ -1285,7 +1286,6 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) { struct mci_platform_data _data; struct platform_device *pdev; - struct dw_dma_slave *dws; if (id != 0) return NULL; @@ -1300,7 +1300,9 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) if (!data) { data = &_data; - memset(data, 0, sizeof(struct mci_platform_data)); + memset(data, -1, sizeof(struct mci_platform_data)); + data->detect_pin = GPIO_PIN_NONE; + data->wp_pin = GPIO_PIN_NONE; } if (platform_device_add_data(pdev, data, @@ -1314,12 +1316,10 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */ - if (data) { - if (data->detect_pin != GPIO_PIN_NONE) - at32_select_gpio(data->detect_pin, 0); - if (data->wp_pin != GPIO_PIN_NONE) - at32_select_gpio(data->wp_pin, 0); - } + if (gpio_is_valid(data->detect_pin)) + at32_select_gpio(data->detect_pin, 0); + if (gpio_is_valid(data->wp_pin)) + at32_select_gpio(data->wp_pin, 0); atmel_mci0_pclk.dev = &pdev->dev; @@ -1853,11 +1853,11 @@ at32_add_device_cf(unsigned int id, unsigned int extint, if (at32_init_ide_or_cf(pdev, data->cs, extint)) goto fail; - if (data->detect_pin != GPIO_PIN_NONE) + if (gpio_is_valid(data->detect_pin)) at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH); - if (data->reset_pin != GPIO_PIN_NONE) + if (gpio_is_valid(data->reset_pin)) at32_select_gpio(data->reset_pin, 0); - if (data->vcc_pin != GPIO_PIN_NONE) + if (gpio_is_valid(data->vcc_pin)) at32_select_gpio(data->vcc_pin, 0); /* READY is used as extint, so we can't select it as gpio */ @@ -1871,6 +1871,58 @@ fail: #endif /* -------------------------------------------------------------------- + * NAND Flash / SmartMedia + * -------------------------------------------------------------------- */ +static struct resource smc_cs3_resource[] __initdata = { + { + .start = 0x0c000000, + .end = 0x0fffffff, + .flags = IORESOURCE_MEM, + }, { + .start = 0xfff03c00, + .end = 0xfff03fff, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device *__init +at32_add_device_nand(unsigned int id, struct atmel_nand_data *data) +{ + struct platform_device *pdev; + + if (id != 0 || !data) + return NULL; + + pdev = platform_device_alloc("atmel_nand", id); + if (!pdev) + goto fail; + + if (platform_device_add_resources(pdev, smc_cs3_resource, + ARRAY_SIZE(smc_cs3_resource))) + goto fail; + + if (platform_device_add_data(pdev, data, + sizeof(struct atmel_nand_data))) + goto fail; + + set_ebi_sfr_bits(HMATRIX_BIT(CS3A)); + if (data->enable_pin) + at32_select_gpio(data->enable_pin, + AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + if (data->rdy_pin) + at32_select_gpio(data->rdy_pin, 0); + if (data->det_pin) + at32_select_gpio(data->det_pin, 0); + + platform_device_add(pdev); + return pdev; + +fail: + platform_device_put(pdev); + return NULL; +} + +/* -------------------------------------------------------------------- * AC97C * -------------------------------------------------------------------- */ static struct resource atmel_ac97c0_resource[] __initdata = { @@ -1885,9 +1937,11 @@ static struct clk atmel_ac97c0_pclk = { .index = 10, }; -struct platform_device *__init at32_add_device_ac97c(unsigned int id) +struct platform_device *__init +at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data) { struct platform_device *pdev; + struct ac97c_platform_data _data; if (id != 0) return NULL; @@ -1898,19 +1952,37 @@ struct platform_device *__init at32_add_device_ac97c(unsigned int id) if (platform_device_add_resources(pdev, atmel_ac97c0_resource, ARRAY_SIZE(atmel_ac97c0_resource))) - goto err_add_resources; + goto fail; - select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */ - select_peripheral(PB(21), PERIPH_B, 0); /* SDO */ - select_peripheral(PB(22), PERIPH_B, 0); /* SDI */ - select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */ + if (!data) { + data = &_data; + memset(data, 0, sizeof(struct ac97c_platform_data)); + data->reset_pin = GPIO_PIN_NONE; + } + + data->dma_rx_periph_id = 3; + data->dma_tx_periph_id = 4; + data->dma_controller_id = 0; + + if (platform_device_add_data(pdev, data, + sizeof(struct ac97c_platform_data))) + goto fail; + + select_peripheral(PB(20), PERIPH_B, 0); /* SDO */ + select_peripheral(PB(21), PERIPH_B, 0); /* SYNC */ + select_peripheral(PB(22), PERIPH_B, 0); /* SCLK */ + select_peripheral(PB(23), PERIPH_B, 0); /* SDI */ + + /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */ + if (data->reset_pin != GPIO_PIN_NONE) + at32_select_gpio(data->reset_pin, 0); atmel_ac97c0_pclk.dev = &pdev->dev; platform_device_add(pdev); return pdev; -err_add_resources: +fail: platform_device_put(pdev); return NULL; } diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c index fa427ed4278..b2d9bc61a35 100644 --- a/arch/avr32/mach-at32ap/hsmc.c +++ b/arch/avr32/mach-at32ap/hsmc.c @@ -278,4 +278,4 @@ static int __init hsmc_init(void) { return platform_driver_register(&hsmc_driver); } -arch_initcall(hsmc_init); +core_initcall(hsmc_init); diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c index 3c85fdaa948..fa92ff6d95f 100644 --- a/arch/avr32/mm/init.c +++ b/arch/avr32/mm/init.c @@ -38,45 +38,6 @@ EXPORT_SYMBOL(empty_zero_page); */ unsigned long mmu_context_cache = NO_CONTEXT; -void show_mem(void) -{ - int total = 0, reserved = 0, cached = 0; - int slab = 0, free = 0, shared = 0; - pg_data_t *pgdat; - - printk("Mem-info:\n"); - show_free_areas(); - - for_each_online_pgdat(pgdat) { - struct page *page, *end; - - page = pgdat->node_mem_map; - end = page + pgdat->node_spanned_pages; - - do { - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (PageSlab(page)) - slab++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - page++; - } while (page < end); - } - - printk ("%d pages of RAM\n", total); - printk ("%d free pages\n", free); - printk ("%d reserved pages\n", reserved); - printk ("%d slab pages\n", slab); - printk ("%d pages shared\n", shared); - printk ("%d pages swap cached\n", cached); -} - /* * paging_init() sets up the page tables * diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index b83b8ef84e9..5a097c46bc4 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -234,7 +234,7 @@ config MEM_MT48LC16M16A2TG_75 bool depends on (BFIN533_EZKIT || BFIN561_EZKIT \ || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \ - || H8606_HVSISTEMAS) + || H8606_HVSISTEMAS || BFIN527_BLUETECHNIX_CM) default y config MEM_MT48LC32M8A2_75 @@ -310,25 +310,6 @@ config BFIN_KERNEL_CLOCK are also not changed, and the Bootloader does 100% of the hardware configuration. -config MEM_SIZE - int "SDRAM Memory Size in MBytes" - depends on BFIN_KERNEL_CLOCK - default 64 - -config MEM_ADD_WIDTH - int "Memory Address Width" - depends on BFIN_KERNEL_CLOCK - depends on (!BF54x) - range 8 11 - default 9 if BFIN533_EZKIT - default 9 if BFIN561_EZKIT - default 9 if H8606_HVSISTEMAS - default 10 if BFIN527_EZKIT - default 10 if BFIN537_STAMP - default 11 if BFIN533_STAMP - default 10 if PNAV10 - default 10 if BFIN532_IP0X - config PLL_BYPASS bool "Bypass PLL" depends on BFIN_KERNEL_CLOCK @@ -349,8 +330,7 @@ config VCO_MULT default "45" if BFIN533_STAMP default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM) default "22" if BFIN533_BLUETECHNIX_CM - default "20" if BFIN537_BLUETECHNIX_CM - default "20" if BFIN561_BLUETECHNIX_CM + default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM) default "20" if BFIN561_EZKIT default "16" if H8606_HVSISTEMAS help @@ -390,7 +370,7 @@ config SCLK_DIV config MAX_MEM_SIZE int "Max SDRAM Memory Size in MBytes" - depends on !BFIN_KERNEL_CLOCK && !MPU + depends on !MPU default 512 help This is the max memory size that the kernel will create CPLB @@ -748,14 +728,6 @@ config BFIN_WT endchoice -config L1_MAX_PIECE - int "Set the max L1 SRAM pieces" - default 16 - help - Set the max memory pieces for the L1 SRAM allocation algorithm. - Min value is 16. Max value is 1024. - - config MPU bool "Enable the memory protection unit (EXPERIMENTAL)" default n @@ -899,7 +871,7 @@ config ARCH_SUSPEND_POSSIBLE depends on !SMP choice - prompt "Default Power Saving Mode" + prompt "Standby Power Saving Mode" depends on PM default PM_BFIN_SLEEP_DEEPER config PM_BFIN_SLEEP_DEEPER @@ -918,6 +890,8 @@ config PM_BFIN_SLEEP_DEEPER normal during Sleep Deeper, due to the reduced SCLK frequency. When in the sleep mode, system DMA access to L1 memory is not supported. + If unsure, select "Sleep Deeper". + config PM_BFIN_SLEEP bool "Sleep" help @@ -925,15 +899,17 @@ config PM_BFIN_SLEEP dissipation by disabling the clock to the processor core (CCLK). The PLL and system clock (SCLK), however, continue to operate in this mode. Typically an external event or RTC activity will wake - up the processor. When in the sleep mode, - system DMA access to L1 memory is not supported. + up the processor. When in the sleep mode, system DMA access to L1 + memory is not supported. + + If unsure, select "Sleep Deeper". endchoice config PM_WAKEUP_BY_GPIO - bool "Cause Wakeup Event by GPIO" + bool "Allow Wakeup from Standby by GPIO" config PM_WAKEUP_GPIO_NUMBER - int "Wakeup GPIO number" + int "GPIO number" range 0 47 depends on PM_WAKEUP_BY_GPIO default 2 if BFIN537_STAMP @@ -954,6 +930,58 @@ config PM_WAKEUP_GPIO_POLAR_EDGE_B bool "Both EDGE" endchoice +comment "Possible Suspend Mem / Hibernate Wake-Up Sources" + depends on PM + +config PM_BFIN_WAKE_RTC + bool "Allow Wake-Up from RESET and on-chip RTC" + depends on PM + default n + help + Enable RTC Wake-Up (Voltage Regulator Power-Up) + +config PM_BFIN_WAKE_PH6 + bool "Allow Wake-Up from on-chip PHY or PH6 GP" + depends on PM && (BF52x || BF534 || BF536 || BF537) + default n + help + Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up) + +config PM_BFIN_WAKE_CAN + bool "Allow Wake-Up from on-chip CAN0/1" + depends on PM && (BF54x || BF534 || BF536 || BF537) + default n + help + Enable CAN0/1 Wake-Up (Voltage Regulator Power-Up) + +config PM_BFIN_WAKE_GP + bool "Allow Wake-Up from GPIOs" + depends on PM && BF54x + default n + help + Enable General-Purpose Wake-Up (Voltage Regulator Power-Up) + +config PM_BFIN_WAKE_USB + bool "Allow Wake-Up from on-chip USB" + depends on PM && (BF54x || BF52x) + default n + help + Enable USB Wake-Up (Voltage Regulator Power-Up) + +config PM_BFIN_WAKE_KEYPAD + bool "Allow Wake-Up from on-chip Keypad" + depends on PM && BF54x + default n + help + Enable Keypad Wake-Up (Voltage Regulator Power-Up) + +config PM_BFIN_WAKE_ROTARY + bool "Allow Wake-Up from on-chip Rotary" + depends on PM && BF54x + default n + help + Enable Rotary Wake-Up (Voltage Regulator Power-Up) + endmenu menu "CPU Frequency scaling" diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug index c61bdebb997..c468624d55f 100644 --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -154,13 +154,6 @@ config EARLY_PRINTK all of this lives in the init section and is thrown away after the kernel boots completely. -config DUAL_CORE_TEST_MODULE - tristate "Dual Core Test Module" - depends on (BF561) - default n - help - Say Y here to build-in dual core test module for dual core test. - config CPLB_INFO bool "Display the CPLB information" help diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 3cbe16caad4..9564731ad3a 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -6,8 +6,9 @@ # for more details. # - -CROSS_COMPILE ?= bfin-uclinux- +ifeq ($(CROSS_COMPILE),) +CROSS_COMPILE := bfin-uclinux- +endif LDFLAGS_vmlinux := -X OBJCOPYFLAGS := -O binary -R .note -R .comment -S GZFLAGS := -9 diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 5e6fb9d8e50..66854a83c0d 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -1,7 +1,6 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24.7 -# Fri May 16 10:02:29 2008 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -290,7 +289,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y -# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_GPTIMERS=y CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set @@ -430,7 +429,58 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m +CONFIG_BFIN_SIR=m +CONFIG_BFIN_SIR0=y +CONFIG_SIR_BFIN_DMA=y +# CONFIG_SIR_BFIN_PIO is not set + +# +# Dongle support +# +# CONFIG_DONGLE is not set +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_MCS_FIR is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -689,8 +739,11 @@ CONFIG_BFIN_OTP=y # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set -# CONFIG_SIMPLE_GPIO is not set -# CONFIG_VT is not set +CONFIG_SIMPLE_GPIO=m +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -872,8 +925,36 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_BFIN_T350MCQB=y +# CONFIG_FB_BFIN_7393 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_LTV350QV=m +CONFIG_BACKLIGHT_CLASS_DEVICE=m +# CONFIG_BACKLIGHT_CORGI is not set # # Display device support @@ -881,9 +962,99 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DISPLAY_SUPPORT is not set # +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_BLACKFIN_VGA16 is not set +CONFIG_LOGO_BLACKFIN_CLUT224=y + +# # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# SPI devices +# + +# +# ALSA Blackfin devices +# +# CONFIG_SND_BLACKFIN_AD1836 is not set +# CONFIG_SND_BLACKFIN_AD1836_TDM is not set +# CONFIG_SND_BLACKFIN_AD1836_I2S is not set +# CONFIG_SND_BLACKFIN_AD1836_MULSUB is not set +# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set +# CONFIG_SND_BFIN_AD73311 is not set +# CONFIG_SND_BFIN_AD73322 is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC=m +CONFIG_SND_BF5XX_SOC=m +CONFIG_SND_MMAP_SUPPORT=y +CONFIG_SND_BF5XX_SOC_I2S=m +CONFIG_SND_BF5XX_SOC_AC97=m +# CONFIG_SND_BF5XX_SOC_WM8750 is not set +# CONFIG_SND_BF5XX_SOC_WM8731 is not set +CONFIG_SND_BF5XX_SOC_SSM2602=m +CONFIG_SND_BF5XX_SOC_BF5xx=m +CONFIG_SND_BF5XX_SPORT_NUM=0 +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_SSM2602=m +# CONFIG_SND_SOC_SSM2602_SPI is not set +CONFIG_SND_SOC_AD1980=m + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 8d817ba0194..6bc11db1269 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.24.7 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -64,32 +63,24 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -141,12 +132,12 @@ CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y -CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC16M16A2TG_75=y CONFIG_BFIN533_EZKIT=y # CONFIG_BFIN533_STAMP is not set # CONFIG_BFIN533_BLUETECHNIX_CM is not set # CONFIG_H8606_HVSISTEMAS is not set +# CONFIG_BFIN532_IP0X is not set # CONFIG_GENERIC_BF533_BOARD is not set # @@ -189,12 +180,14 @@ CONFIG_WDTIMER=13 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup # CONFIG_CLKIN_HZ=27000000 # CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=750000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -208,13 +201,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=512 -CONFIG_MEM_ADD_WIDTH=9 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -250,12 +247,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -293,17 +292,13 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0xAAC3 +CONFIG_BANK_3=0xAAC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -321,7 +316,9 @@ CONFIG_BINFMT_ZFLAT=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y CONFIG_PM_BFIN_SLEEP_DEEPER=y # CONFIG_PM_BFIN_SLEEP is not set # CONFIG_PM_WAKEUP_BY_GPIO is not set @@ -367,6 +364,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -393,10 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -428,6 +422,7 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y # SIR device drivers # CONFIG_IRTTY_SIR=m +# CONFIG_BFIN_SIR is not set # # Dongle support @@ -457,6 +452,7 @@ CONFIG_IRTTY_SIR=m # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -465,14 +461,11 @@ CONFIG_IRTTY_SIR=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set @@ -492,6 +485,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -548,20 +542,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -571,10 +553,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -582,32 +562,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -624,15 +601,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -647,7 +616,6 @@ CONFIG_INPUT=m # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set @@ -672,13 +640,12 @@ CONFIG_INPUT_EVDEV=m # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_AD5304 is not set +CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -706,28 +673,11 @@ CONFIG_UNIX98_PTYS=y # CAN, the car bus and industrial fieldbus # # CONFIG_CAN4LINUX is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set -CONFIG_BLACKFIN_DPMC=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set @@ -748,22 +698,37 @@ CONFIG_SPI_BFIN=y # # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -780,72 +745,27 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -862,10 +782,6 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_TEST is not set # -# I2C RTC drivers -# - -# # SPI RTC drivers # # CONFIG_RTC_DRV_RS5C348 is not set @@ -875,8 +791,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -885,22 +803,9 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_BFIN=y # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_UIO is not set # # File systems @@ -945,7 +850,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -971,10 +875,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set @@ -983,10 +889,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1006,17 +909,12 @@ CONFIG_SMB_FS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -1057,21 +955,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1079,6 +972,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y @@ -1098,11 +992,7 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=m - -# -# Cryptographic options -# +# CONFIG_SECURITY_CAPABILITIES is not set # CONFIG_CRYPTO is not set # @@ -1113,6 +1003,7 @@ CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 20d598d17bd..d77d991a1f6 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.24.7 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -64,32 +63,24 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -141,12 +132,12 @@ CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y -CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC64M4A2FB_7E=y # CONFIG_BFIN533_EZKIT is not set CONFIG_BFIN533_STAMP=y # CONFIG_BFIN533_BLUETECHNIX_CM is not set # CONFIG_H8606_HVSISTEMAS is not set +# CONFIG_BFIN532_IP0X is not set # CONFIG_GENERIC_BF533_BOARD is not set # @@ -189,12 +180,14 @@ CONFIG_WDTIMER=13 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup # CONFIG_CLKIN_HZ=11059200 # CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=750000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -208,14 +201,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=512 -CONFIG_MEM_ADD_WIDTH=11 -CONFIG_ENET_FLASH_PIN=0 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -251,12 +247,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -294,17 +292,13 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0xAAC3 +CONFIG_BANK_3=0xAAC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -322,7 +316,9 @@ CONFIG_BINFMT_ZFLAT=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y CONFIG_PM_BFIN_SLEEP_DEEPER=y # CONFIG_PM_BFIN_SLEEP is not set # CONFIG_PM_WAKEUP_BY_GPIO is not set @@ -368,6 +364,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -394,10 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -429,6 +422,9 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y # SIR device drivers # CONFIG_IRTTY_SIR=m +CONFIG_BFIN_SIR=m +CONFIG_SIR_BFIN_DMA=y +# CONFIG_SIR_BFIN_PIO is not set # # Dongle support @@ -458,6 +454,7 @@ CONFIG_IRTTY_SIR=m # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -466,14 +463,11 @@ CONFIG_IRTTY_SIR=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set @@ -493,6 +487,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -524,11 +519,7 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_BANK_0=0x7BB0 -CONFIG_BFIN_FLASH_BANK_1=0x7BB0 -CONFIG_BFIN_FLASH_BANK_2=0x7BB0 -CONFIG_BFIN_FLASH_BANK_3=0x7BB0 +CONFIG_MTD_BFIN_ASYNC=m # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -555,20 +546,8 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -578,10 +557,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -589,32 +566,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -631,15 +605,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -654,7 +620,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set @@ -667,14 +632,8 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set CONFIG_TWI_KEYPAD=m -CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39 # # Hardware I/O ports @@ -687,15 +646,13 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39 # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set CONFIG_TWI_LCD=m -CONFIG_TWI_LCD_SLAVE_ADDR=34 -# CONFIG_AD5304 is not set +CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -723,28 +680,11 @@ CONFIG_UNIX98_PTYS=y # CAN, the car bus and industrial fieldbus # # CONFIG_CAN4LINUX is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set -CONFIG_BLACKFIN_DPMC=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y @@ -764,6 +704,7 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # @@ -771,14 +712,15 @@ CONFIG_I2C_ALGOBIT=m # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_AD5252 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set -# CONFIG_SENSORS_PCA9543 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -801,14 +743,11 @@ CONFIG_SPI_BFIN=y # # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -816,12 +755,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -836,13 +775,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -852,6 +794,20 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -863,24 +819,20 @@ CONFIG_HWMON=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -CONFIG_DAB=y +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=m CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -895,7 +847,7 @@ CONFIG_FB_DEFERRED_IO=y # # Frame buffer hardware drivers # -CONFIG_FB_BFIN_7171=m +# CONFIG_FB_BFIN_T350MCQB is not set CONFIG_FB_BFIN_7393=m CONFIG_NTSC=y # CONFIG_PAL is not set @@ -905,9 +857,14 @@ CONFIG_NTSC=y # CONFIG_PAL_YCBCR is not set CONFIG_ADV7393_1XMEM=y # CONFIG_ADV7393_2XMEM is not set -# CONFIG_FB_BFIN_T350MCQB is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_LOGO is not set # @@ -941,6 +898,10 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_MPU401 is not set # +# SPI devices +# + +# # ALSA Blackfin devices # CONFIG_SND_BLACKFIN_AD1836=m @@ -953,69 +914,43 @@ CONFIG_SND_BLACKFIN_SPI_PFBIT=4 CONFIG_SND_BFIN_AD73311=m CONFIG_SND_BFIN_SPORT=0 CONFIG_SND_BFIN_AD73311_SE=4 +CONFIG_SND_BFIN_AD73322=m +CONFIG_SND_BFIN_AD73322_SPORT0_SE=10 +CONFIG_SND_BFIN_AD73322_SPORT1_SE=14 +CONFIG_SND_BFIN_AD73322_RESET=12 # # System on Chip audio support # -# CONFIG_SND_SOC is not set +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC=m +CONFIG_SND_BF5XX_SOC=m +CONFIG_SND_MMAP_SUPPORT=y +CONFIG_SND_BF5XX_SOC_AC97=m +# CONFIG_SND_BF5XX_SOC_WM8750 is not set +# CONFIG_SND_BF5XX_SOC_WM8731 is not set +# CONFIG_SND_BF5XX_SOC_SSM2602 is not set +CONFIG_SND_BF5XX_SOC_BF5xx=m +CONFIG_SND_BF5XX_SPORT_NUM=0 +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set # -# Open Sound System +# SoC Audio support for SuperH # -# CONFIG_SOUND_PRIME is not set +CONFIG_SND_SOC_AD1980=m # -# HID Devices +# Open Sound System # +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1035,6 +970,7 @@ CONFIG_RTC_INTF_DEV=y # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set @@ -1042,6 +978,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set # # SPI RTC drivers @@ -1053,8 +990,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1063,22 +1002,9 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_BFIN=y # -# DMA Engine support +# Userspace I/O # -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_UIO is not set # # File systems @@ -1123,7 +1049,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1149,10 +1074,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set @@ -1161,10 +1088,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1184,17 +1108,12 @@ CONFIG_SMB_FS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -1235,21 +1154,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1257,6 +1171,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y @@ -1276,11 +1191,7 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=m - -# -# Cryptographic options -# +# CONFIG_SECURITY_CAPABILITIES is not set # CONFIG_CRYPTO is not set # @@ -1291,6 +1202,7 @@ CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index b5189c8ba26..5fd7c4b143d 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.24.7 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -64,32 +63,24 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -141,7 +132,6 @@ CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y -CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC32M8A2_75=y CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_RTC=8 @@ -197,12 +187,14 @@ CONFIG_IRQ_PROG_INTA=12 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -216,13 +208,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=512 -CONFIG_MEM_ADD_WIDTH=10 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -258,12 +254,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -301,17 +299,13 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0x99B3 +CONFIG_BANK_3=0x99B2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -329,7 +323,9 @@ CONFIG_BINFMT_ZFLAT=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y CONFIG_PM_BFIN_SLEEP_DEEPER=y # CONFIG_PM_BFIN_SLEEP is not set # CONFIG_PM_WAKEUP_BY_GPIO is not set @@ -375,6 +371,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -401,10 +398,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -436,6 +429,10 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y # SIR device drivers # CONFIG_IRTTY_SIR=m +CONFIG_BFIN_SIR=m +CONFIG_BFIN_SIR1=y +CONFIG_SIR_BFIN_DMA=y +# CONFIG_SIR_BFIN_PIO is not set # # Dongle support @@ -465,6 +462,7 @@ CONFIG_IRTTY_SIR=m # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -473,14 +471,11 @@ CONFIG_IRTTY_SIR=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set @@ -500,6 +495,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -572,20 +568,8 @@ CONFIG_MTD_NAND_IDS=m # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -595,10 +579,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -606,22 +588,18 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set CONFIG_PHYLIB=y # @@ -635,21 +613,24 @@ CONFIG_PHYLIB=y # CONFIG_VITESSE_PHY is not set CONFIG_SMSC_PHY=y # CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_SMC91X is not set CONFIG_BFIN_MAC=y CONFIG_BFIN_MAC_USE_L1=y CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_BFIN_MAC_RMII is not set +# CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -666,15 +647,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -689,7 +662,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set @@ -702,14 +674,8 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set CONFIG_TWI_KEYPAD=m -CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72 # # Hardware I/O ports @@ -722,15 +688,13 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72 # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set CONFIG_TWI_LCD=m -CONFIG_TWI_LCD_SLAVE_ADDR=34 -# CONFIG_AD5304 is not set +CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -766,28 +730,11 @@ CONFIG_CAN4LINUX=y # CONFIG_CAN_MCF5282 is not set # CONFIG_CAN_UNCTWINCAN is not set CONFIG_CAN_BLACKFIN=m - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set -CONFIG_BLACKFIN_DPMC=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y @@ -809,6 +756,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # @@ -816,14 +764,15 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set CONFIG_SENSORS_AD5252=m # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set -# CONFIG_SENSORS_PCA9543 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -846,14 +795,11 @@ CONFIG_SPI_BFIN=y # # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -861,12 +807,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -881,13 +827,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -897,6 +846,20 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -913,21 +876,15 @@ CONFIG_DAB=y # # Graphics support # -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_LCD_CLASS_DEVICE=m - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=m CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -942,7 +899,8 @@ CONFIG_FB_DEFERRED_IO=y # # Frame buffer hardware drivers # -CONFIG_FB_BFIN_7171=m +# CONFIG_FB_HITACHI_TX09 is not set +# CONFIG_FB_BFIN_T350MCQB is not set CONFIG_FB_BFIN_7393=m CONFIG_NTSC=y # CONFIG_PAL is not set @@ -956,10 +914,18 @@ CONFIG_FB_BF537_LQ035=m CONFIG_LQ035_SLAVE_ADDR=0x58 # CONFIG_FB_BFIN_LANDSCAPE is not set # CONFIG_FB_BFIN_BGR is not set -# CONFIG_FB_BFIN_T350MCQB is not set -# CONFIG_FB_HITACHI_TX09 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LTV350QV is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_CORGI=m + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_LOGO is not set # @@ -993,6 +959,10 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_MPU401 is not set # +# SPI devices +# + +# # ALSA Blackfin devices # CONFIG_SND_BLACKFIN_AD1836=m @@ -1005,6 +975,10 @@ CONFIG_SND_BLACKFIN_SPI_PFBIT=4 CONFIG_SND_BFIN_AD73311=m CONFIG_SND_BFIN_SPORT=0 CONFIG_SND_BFIN_AD73311_SE=4 +CONFIG_SND_BFIN_AD73322=m +CONFIG_SND_BFIN_AD73322_SPORT0_SE=10 +CONFIG_SND_BFIN_AD73322_SPORT1_SE=14 +CONFIG_SND_BFIN_AD73322_RESET=12 # # System on Chip audio support @@ -1016,9 +990,14 @@ CONFIG_SND_MMAP_SUPPORT=y CONFIG_SND_BF5XX_SOC_AC97=m # CONFIG_SND_BF5XX_SOC_WM8750 is not set # CONFIG_SND_BF5XX_SOC_WM8731 is not set +# CONFIG_SND_BF5XX_SOC_SSM2602 is not set CONFIG_SND_BF5XX_SOC_BF5xx=m CONFIG_SND_BF5XX_SPORT_NUM=0 # CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set + +# +# SoC Audio support for SuperH +# CONFIG_SND_SOC_AD1980=m # @@ -1026,59 +1005,18 @@ CONFIG_SND_SOC_AD1980=m # # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_NO_DUMMY_DELAY is not set +# CONFIG_DUMMY_DELAY_BANK0 is not set +# CONFIG_DUMMY_DELAY_BANK1 is not set +# CONFIG_DUMMY_DELAY_BANK2 is not set +# CONFIG_DUMMY_DELAY_BANK3 is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1098,6 +1036,7 @@ CONFIG_RTC_INTF_DEV=y # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set @@ -1105,6 +1044,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set # # SPI RTC drivers @@ -1116,8 +1056,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1126,22 +1068,9 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_BFIN=y # -# DMA Engine support +# Userspace I/O # -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_UIO is not set # # File systems @@ -1186,7 +1115,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1212,10 +1140,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set @@ -1224,10 +1154,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1247,17 +1174,12 @@ CONFIG_SMB_FS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -1298,21 +1220,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1320,6 +1237,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y @@ -1339,11 +1257,7 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=m - -# -# Cryptographic options -# +# CONFIG_SECURITY_CAPABILITIES is not set # CONFIG_CRYPTO is not set # @@ -1354,6 +1268,7 @@ CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index 1ff2ff4b49a..390669e8668 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -365,7 +365,7 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x5554 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0x99B3 +CONFIG_BANK_3=0x99B2 CONFIG_EBIU_MBSCTLVAL=0x0 CONFIG_EBIU_MODEVAL=0x1 CONFIG_EBIU_FCTLVAL=0x6 @@ -468,7 +468,60 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m +CONFIG_BFIN_SIR=m +# CONFIG_BFIN_SIR0 is not set +# CONFIG_BFIN_SIR2 is not set +CONFIG_BFIN_SIR3=y +CONFIG_SIR_BFIN_DMA=y +# CONFIG_SIR_BFIN_PIO is not set + +# +# Dongle support +# +# CONFIG_DONGLE is not set +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_MCS_FIR is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -575,6 +628,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_BF5XX=y CONFIG_MTD_NAND_BF5XX_HWECC=y +# CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC is not set # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set @@ -766,7 +820,7 @@ CONFIG_BFIN_OTP=y # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set -# CONFIG_SIMPLE_GPIO is not set +CONFIG_SIMPLE_GPIO=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y @@ -1071,6 +1125,7 @@ CONFIG_SND_BF5XX_SOC_AC97=y CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y # CONFIG_SND_BF5XX_SOC_WM8750 is not set # CONFIG_SND_BF5XX_SOC_WM8731 is not set +# CONFIG_SND_BF5XX_SOC_SSM2602 is not set CONFIG_SND_BF5XX_SPORT_NUM=0 CONFIG_SND_BF5XX_HAVE_COLD_RESET=y CONFIG_SND_BF5XX_RESET_GPIO_NUM=19 @@ -1133,7 +1188,7 @@ CONFIG_USB_MUSB_HOST=y # CONFIG_USB_MUSB_OTG is not set CONFIG_USB_MUSB_HDRC_HCD=y # CONFIG_MUSB_PIO_ONLY is not set -# CONFIG_USB_INVENTRA_DMA is not set +CONFIG_USB_INVENTRA_DMA=y # CONFIG_USB_TI_CPPI_DMA is not set CONFIG_USB_MUSB_LOGLEVEL=0 @@ -1312,7 +1367,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index b4a20c89081..976a4d7ba17 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.24.7 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -64,32 +63,24 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -140,7 +131,6 @@ CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_0_5 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set -CONFIG_BFIN_DUAL_CORE=y CONFIG_MEM_MT48LC16M16A2TG_75=y CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_SPORT0_ERROR=7 @@ -233,12 +223,14 @@ CONFIG_IRQ_WDTIMER=13 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup # CONFIG_CLKIN_HZ=30000000 # CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -252,13 +244,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=512 -CONFIG_MEM_ADD_WIDTH=9 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -294,12 +290,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -341,17 +339,13 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0xAAC3 +CONFIG_BANK_3=0xAAC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -367,9 +361,15 @@ CONFIG_BINFMT_ZFLAT=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# # Networking # CONFIG_NET=y @@ -405,6 +405,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -431,10 +432,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -466,6 +463,7 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y # SIR device drivers # CONFIG_IRTTY_SIR=m +# CONFIG_BFIN_SIR is not set # # Dongle support @@ -495,6 +493,7 @@ CONFIG_IRTTY_SIR=m # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -503,14 +502,11 @@ CONFIG_IRTTY_SIR=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set @@ -530,6 +526,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -590,20 +587,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -613,10 +598,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -624,32 +607,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -666,15 +646,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -689,7 +661,6 @@ CONFIG_INPUT=m # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set @@ -714,13 +685,12 @@ CONFIG_INPUT_EVDEV=m # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_AD5304 is not set +CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -748,27 +718,11 @@ CONFIG_UNIX98_PTYS=y # CAN, the car bus and industrial fieldbus # # CONFIG_CAN4LINUX is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set @@ -789,22 +743,37 @@ CONFIG_SPI_BFIN=y # # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -821,91 +790,33 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_UIO is not set # # File systems @@ -950,7 +861,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -976,10 +886,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set @@ -988,10 +900,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1011,17 +920,12 @@ CONFIG_SMB_FS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -1062,21 +966,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1084,6 +983,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y @@ -1104,11 +1004,7 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=m - -# -# Cryptographic options -# +# CONFIG_SECURITY_CAPABILITIES is not set # CONFIG_CRYPTO is not set # @@ -1119,6 +1015,7 @@ CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig new file mode 100644 index 00000000000..0799aa9bba9 --- /dev/null +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -0,0 +1,1185 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24.7 +# Fri Jul 18 18:00:41 2008 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +CONFIG_BF527=y +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +CONFIG_BF_REV_0_1=y +# CONFIG_BF_REV_0_2 is not set +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF52x=y +CONFIG_MEM_MT48LC16M16A2TG_75=y +# CONFIG_BFIN527_EZKIT is not set +CONFIG_BFIN527_BLUETECHNIX_CM=y + +# +# BF527 Specific Configuration +# + +# +# Alternative Multiplexing Scheme +# +# CONFIG_BF527_SPORT0_PORTF is not set +CONFIG_BF527_SPORT0_PORTG=y +CONFIG_BF527_SPORT0_TSCLK_PG10=y +# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set +CONFIG_BF527_UART1_PORTF=y +# CONFIG_BF527_UART1_PORTG is not set +# CONFIG_BF527_NAND_D_PORTF is not set +CONFIG_BF527_NAND_D_PORTH=y + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_DMA0_ERROR=7 +CONFIG_IRQ_DMAR0_BLK=7 +CONFIG_IRQ_DMAR1_BLK=7 +CONFIG_IRQ_DMAR0_OVR=7 +CONFIG_IRQ_DMAR1_OVR=7 +CONFIG_IRQ_PPI_ERROR=7 +CONFIG_IRQ_MAC_ERROR=7 +CONFIG_IRQ_SPORT0_ERROR=7 +CONFIG_IRQ_SPORT1_ERROR=7 +CONFIG_IRQ_UART0_ERROR=7 +CONFIG_IRQ_UART1_ERROR=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_OPTSEC=11 +CONFIG_IRQ_CNT=11 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_PORTH_INTA=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_PORTH_INTB=11 +CONFIG_IRQ_TMR0=12 +CONFIG_IRQ_TMR1=12 +CONFIG_IRQ_TMR2=12 +CONFIG_IRQ_TMR3=12 +CONFIG_IRQ_TMR4=12 +CONFIG_IRQ_TMR5=12 +CONFIG_IRQ_TMR6=12 +CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_PORTG_INTA=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 +CONFIG_IRQ_PORTF_INTA=13 +CONFIG_IRQ_PORTF_INTB=13 +CONFIG_IRQ_SPI_ERROR=7 +CONFIG_IRQ_NFC_ERROR=7 +CONFIG_IRQ_HDMA_ERROR=7 +CONFIG_IRQ_HDMA=7 +CONFIG_IRQ_USB_EINT=10 +CONFIG_IRQ_USB_INT0=11 +CONFIG_IRQ_USB_INT1=11 +CONFIG_IRQ_USB_INT2=11 +CONFIG_IRQ_USB_DMA=11 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=512 +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# Misc +# +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +# CONFIG_SCHEDULE_L1 is not set +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +# CONFIG_MEMSET_L1 is not set +# CONFIG_MEMCPY_L1 is not set +# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +CONFIG_BFIN_GPTIMERS=y +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x5554 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0xFFC0 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_PM_BFIN_SLEEP_DEEPER is not set +# CONFIG_PM_BFIN_SLEEP is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=m +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_BFIN_MAC=y +CONFIG_BFIN_MAC_USE_L1=y +CONFIG_BFIN_TX_DESC_NUM=10 +CONFIG_BFIN_RX_DESC_NUM=20 +CONFIG_BFIN_MAC_RMII=y +# CONFIG_SMC91X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set +# CONFIG_BFIN_SPORT is not set +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_TWI_LCD is not set +CONFIG_SIMPLE_GPIO=m +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_BFIN_UART1=y +# CONFIG_BFIN_UART1_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_BLACKFIN_TWI=m +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_AD5252 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +CONFIG_USB_OTG_BLACKLIST_HUB=y + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# Blackfin high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_MUSB_HDRC_HCD=y +CONFIG_MUSB_PIO_ONLY=y +CONFIG_USB_MUSB_LOGLEVEL=0 + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_BFIN=y + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +# CONFIG_INSTRUMENTATION is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_MMRS=y +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_EARLY_PRINTK=y +# CONFIG_CPLB_INFO is not set +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig index 560890fe0d3..09deea44480 100644 --- a/arch/blackfin/configs/CM-BF533_defconfig +++ b/arch/blackfin/configs/CM-BF533_defconfig @@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set @@ -291,7 +292,7 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0xFFC3 +CONFIG_BANK_3=0xFFC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) @@ -617,8 +618,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # # CAN, the car bus and industrial fieldbus @@ -778,7 +778,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -866,11 +866,11 @@ CONFIG_MSDOS_PARTITION=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_MMRS is not set +CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig index 9f66d2de100..219fc345a5f 100644 --- a/arch/blackfin/configs/CM-BF537E_defconfig +++ b/arch/blackfin/configs/CM-BF537E_defconfig @@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set @@ -299,7 +300,7 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0xFFC3 +CONFIG_BANK_3=0xFFC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) @@ -351,7 +352,10 @@ CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set @@ -645,8 +649,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # # CAN, the car bus and industrial fieldbus @@ -806,7 +809,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -894,12 +897,12 @@ CONFIG_MSDOS_PARTITION=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_MMRS is not set -# CONFIG_DEBUG_HUNT_FOR_ZERO is not set +CONFIG_DEBUG_MMRS=y +CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig index 2694d06c5bd..9873d586fc7 100644 --- a/arch/blackfin/configs/CM-BF537U_defconfig +++ b/arch/blackfin/configs/CM-BF537U_defconfig @@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set @@ -298,8 +299,8 @@ CONFIG_C_AMBEN_ALL=y # CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 -CONFIG_BANK_2=0xFFC3 -CONFIG_BANK_3=0xFFC3 +CONFIG_BANK_2=0xFFC2 +CONFIG_BANK_3=0xFFC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) @@ -628,8 +629,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # # CAN, the car bus and industrial fieldbus @@ -806,7 +806,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -894,12 +894,12 @@ CONFIG_MSDOS_PARTITION=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_MMRS is not set -# CONFIG_DEBUG_HUNT_FOR_ZERO is not set +CONFIG_DEBUG_MMRS=y +CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index 90207251c53..0e3605fdb7b 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -363,7 +363,7 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x5554 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0x99B3 +CONFIG_BANK_3=0x99B2 CONFIG_EBIU_MBSCTLVAL=0x0 CONFIG_EBIU_MODEVAL=0x1 CONFIG_EBIU_FCTLVAL=0x6 @@ -744,8 +744,8 @@ CONFIG_BFIN_OTP=y # CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y -# CONFIG_SERIAL_BFIN_DMA is not set -CONFIG_SERIAL_BFIN_PIO=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set # CONFIG_SERIAL_BFIN_UART0 is not set CONFIG_SERIAL_BFIN_UART1=y # CONFIG_BFIN_UART1_CTSRTS is not set @@ -1149,7 +1149,7 @@ CONFIG_RTC_DRV_BFIN=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1332,7 +1332,7 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set -# CONFIG_DEBUG_MMRS is not set +CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig index daf00906c1e..59c7cdbee90 100644 --- a/arch/blackfin/configs/CM-BF561_defconfig +++ b/arch/blackfin/configs/CM-BF561_defconfig @@ -35,7 +35,8 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y @@ -341,7 +342,7 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0xFFC3 +CONFIG_BANK_3=0xFFC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) @@ -631,8 +632,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # # CAN, the car bus and industrial fieldbus @@ -756,7 +756,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -830,12 +830,12 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set -# CONFIG_DEBUG_MMRS is not set +CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index 679c7483ea7..ba0bee90b7e 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -967,7 +967,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index 4384a670a8b..285d2241df2 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -1066,7 +1066,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index 87622ad9df4..bffca7de65d 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -294,7 +294,7 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x33B0 CONFIG_BANK_2=0x33B0 -CONFIG_BANK_3=0x99B3 +CONFIG_BANK_3=0x99B2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) @@ -1080,7 +1080,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index 951ea041257..b1309f878fc 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -1067,7 +1067,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 6140cd69c78..606adc78aa8 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -18,6 +18,5 @@ endif obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o -obj-$(CONFIG_DUAL_CORE_TEST_MODULE) += dualcore_test.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index d54f19085f3..93229b3d6e3 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -472,6 +472,40 @@ unsigned long get_dma_curr_addr(unsigned int channel) } EXPORT_SYMBOL(get_dma_curr_addr); +#ifdef CONFIG_PM +int blackfin_dma_suspend(void) +{ + int i; + +#ifdef CONFIG_BF561 /* IMDMA channels doesn't have a PERIPHERAL_MAP */ + for (i = 0; i <= CH_MEM_STREAM3_SRC; i++) { +#else + for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) { +#endif + if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) { + printk(KERN_ERR "DMA Channel %d failed to suspend\n", i); + return -EBUSY; + } + + dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map; + } + + return 0; +} + +void blackfin_dma_resume(void) +{ + int i; + +#ifdef CONFIG_BF561 /* IMDMA channels doesn't have a PERIPHERAL_MAP */ + for (i = 0; i <= CH_MEM_STREAM3_SRC; i++) +#else + for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) +#endif + dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map; +} +#endif + static void *__dma_memcpy(void *dest, const void *src, size_t size) { int direction; /* 1 - address decrease, 0 - address increase */ diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index b6d89d1644c..ecbd141e0ef 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -186,7 +186,10 @@ static struct str_ident { char name[RESOURCE_LABEL_SIZE]; } str_ident[MAX_RESOURCES]; -#if defined(CONFIG_PM) && !defined(CONFIG_BF54x) +#if defined(CONFIG_PM) +#if defined(CONFIG_BF54x) +static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)]; +#else static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS]; static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)]; @@ -206,7 +209,7 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PORTF_INT #ifdef BF561_FAMILY static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB}; #endif - +#endif #endif /* CONFIG_PM */ #if defined(BF548_FAMILY) @@ -667,7 +670,7 @@ static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type) return 0; } -u32 bfin_pm_setup(void) +u32 bfin_pm_standby_setup(void) { u16 bank, mask, i, gpio; @@ -679,7 +682,7 @@ u32 bfin_pm_setup(void) gpio_bankb[bank]->maskb = 0; if (mask) { -#ifdef BF537_FAMILY +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) gpio_bank_saved[bank].fer = *port_fer[bank]; #endif gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen; @@ -715,7 +718,7 @@ u32 bfin_pm_setup(void) return 0; } -void bfin_pm_restore(void) +void bfin_pm_standby_restore(void) { u16 bank, mask, i; @@ -724,7 +727,7 @@ void bfin_pm_restore(void) bank = gpio_bank(i); if (mask) { -#ifdef BF537_FAMILY +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) *port_fer[bank] = gpio_bank_saved[bank].fer; #endif gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen; @@ -743,8 +746,111 @@ void bfin_pm_restore(void) AWA_DUMMY_READ(maskb); } +void bfin_gpio_pm_hibernate_suspend(void) +{ + int i, bank; + + for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { + bank = gpio_bank(i); + +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) + gpio_bank_saved[bank].fer = *port_fer[bank]; +#ifdef BF527_FAMILY + gpio_bank_saved[bank].mux = *port_mux[bank]; +#else + if (bank == 0) + gpio_bank_saved[bank].mux = bfin_read_PORT_MUX(); +#endif +#endif + gpio_bank_saved[bank].data = gpio_bankb[bank]->data; + gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen; + gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar; + gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir; + gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge; + gpio_bank_saved[bank].both = gpio_bankb[bank]->both; + gpio_bank_saved[bank].maska = gpio_bankb[bank]->maska; + } + + AWA_DUMMY_READ(maska); +} + +void bfin_gpio_pm_hibernate_restore(void) +{ + int i, bank; + + for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { + bank = gpio_bank(i); + +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) +#ifdef BF527_FAMILY + *port_mux[bank] = gpio_bank_saved[bank].mux; +#else + if (bank == 0) + bfin_write_PORT_MUX(gpio_bank_saved[bank].mux); +#endif + *port_fer[bank] = gpio_bank_saved[bank].fer; +#endif + gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen; + gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir; + gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar; + gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge; + gpio_bankb[bank]->both = gpio_bank_saved[bank].both; + + gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data + | gpio_bank_saved[bank].dir; + + gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska; + } + AWA_DUMMY_READ(maska); +} + + #endif #else /* BF548_FAMILY */ +#ifdef CONFIG_PM + +u32 bfin_pm_standby_setup(void) +{ + return 0; +} + +void bfin_pm_standby_restore(void) +{ + +} + +void bfin_gpio_pm_hibernate_suspend(void) +{ + int i, bank; + + for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { + bank = gpio_bank(i); + + gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer; + gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux; + gpio_bank_saved[bank].data = gpio_array[bank]->port_data; + gpio_bank_saved[bank].data = gpio_array[bank]->port_data; + gpio_bank_saved[bank].inen = gpio_array[bank]->port_inen; + gpio_bank_saved[bank].dir = gpio_array[bank]->port_dir_set; + } +} + +void bfin_gpio_pm_hibernate_restore(void) +{ + int i, bank; + + for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { + bank = gpio_bank(i); + + gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux; + gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer; + gpio_array[bank]->port_inen = gpio_bank_saved[bank].inen; + gpio_array[bank]->port_dir_set = gpio_bank_saved[bank].dir; + gpio_array[bank]->port_set = gpio_bank_saved[bank].data + | gpio_bank_saved[bank].dir; + } +} +#endif unsigned short get_gpio_dir(unsigned gpio) { diff --git a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S index 2788532de72..ecbabc0a1fe 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S +++ b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S @@ -125,6 +125,6 @@ ENTRY(__cplb_hdr) SP += -12; call _panic_cplb_error; SP += 12; - JUMP _handle_bad_cplb; + JUMP.L _handle_bad_cplb; ENDPROC(__cplb_hdr) diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 6be0c50122e..224e7cc30bc 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -26,11 +26,7 @@ #include <asm/cplb.h> #include <asm/cplbinit.h> -#ifdef CONFIG_MAX_MEM_SIZE -# define CPLB_MEM CONFIG_MAX_MEM_SIZE -#else -# define CPLB_MEM CONFIG_MEM_SIZE -#endif +#define CPLB_MEM CONFIG_MAX_MEM_SIZE /* * Number of required data CPLB switchtable entries diff --git a/arch/blackfin/kernel/dualcore_test.c b/arch/blackfin/kernel/dualcore_test.c deleted file mode 100644 index 0fcba74840b..00000000000 --- a/arch/blackfin/kernel/dualcore_test.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * File: arch/blackfin/kernel/dualcore_test.c - * Based on: - * Author: - * - * Created: - * Description: Small test code for CoreB on a BF561 - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/init.h> -#include <linux/module.h> - -static int *testarg = (int *)0xfeb00000; - -static int test_init(void) -{ - *testarg = 1; - printk(KERN_INFO "Dual core test module inserted: set testarg = [%d]\n @ [%p]\n", - *testarg, testarg); - return 0; -} - -static void test_exit(void) -{ - printk(KERN_INFO "Dual core test module removed: testarg = [%d]\n", *testarg); -} - -module_init(test_init); -module_exit(test_exit); diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S index 65f4e67a65c..31bd9bf3efa 100644 --- a/arch/blackfin/kernel/entry.S +++ b/arch/blackfin/kernel/entry.S @@ -64,6 +64,11 @@ ENDPROC(_ret_from_fork) ENTRY(_sys_fork) r0 = -EINVAL; +#if (ANOMALY_05000371) + nop; + nop; + nop; +#endif rts; ENDPROC(_sys_fork) diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index a9c15515bfd..a1f9641a642 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -203,6 +203,8 @@ struct hw_breakpoint { int kgdb_arch_init(void) { + debugger_step = 0; + kgdb_remove_all_hw_break(); return 0; } @@ -368,6 +370,7 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo, char *ptr; int newPC; int wp_status; + int i; switch (remcom_in_buffer[0]) { case 'c': @@ -392,7 +395,18 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo, /* set the trace bit if we're stepping */ if (remcom_in_buffer[0] == 's') { linux_regs->syscfg |= 0x1; - debugger_step = 1; + debugger_step = linux_regs->ipend; + debugger_step >>= 6; + for (i = 10; i > 0; i--, debugger_step >>= 1) + if (debugger_step & 1) + break; + /* i indicate event priority of current stopped instruction + * user space instruction is 0, IVG15 is 1, IVTMR is 10. + * debugger_step > 0 means in single step mode + */ + debugger_step = i + 1; + } else { + debugger_step = 0; } wp_status = bfin_read_WPSTAT(); diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c index 14a42848f37..e1bebc80a5b 100644 --- a/arch/blackfin/kernel/module.c +++ b/arch/blackfin/kernel/module.c @@ -173,7 +173,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs, for (s = sechdrs; s < sechdrs_end; ++s) { if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) || ((strcmp(".text", secstrings + s->sh_name) == 0) && - (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) { + (hdr->e_flags & EF_BFIN_CODE_IN_L1) && (s->sh_size > 0))) { dest = l1_inst_sram_alloc(s->sh_size); mod->arch.text_l1 = dest; if (dest == NULL) { @@ -188,7 +188,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs, } if ((strcmp(".l1.data", secstrings + s->sh_name) == 0) || ((strcmp(".data", secstrings + s->sh_name) == 0) && - (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) { + (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) { dest = l1_data_sram_alloc(s->sh_size); mod->arch.data_a_l1 = dest; if (dest == NULL) { @@ -203,7 +203,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs, } if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 || ((strcmp(".bss", secstrings + s->sh_name) == 0) && - (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) { + (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) { dest = l1_data_sram_alloc(s->sh_size); mod->arch.bss_a_l1 = dest; if (dest == NULL) { @@ -242,6 +242,51 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs, s->sh_flags &= ~SHF_ALLOC; s->sh_addr = (unsigned long)dest; } + if ((strcmp(".l2.text", secstrings + s->sh_name) == 0) || + ((strcmp(".text", secstrings + s->sh_name) == 0) && + (hdr->e_flags & EF_BFIN_CODE_IN_L2) && (s->sh_size > 0))) { + dest = l2_sram_alloc(s->sh_size); + mod->arch.text_l2 = dest; + if (dest == NULL) { + printk(KERN_ERR + "module %s: L2 SRAM allocation failed\n", + mod->name); + return -1; + } + memcpy(dest, (void *)s->sh_addr, s->sh_size); + s->sh_flags &= ~SHF_ALLOC; + s->sh_addr = (unsigned long)dest; + } + if ((strcmp(".l2.data", secstrings + s->sh_name) == 0) || + ((strcmp(".data", secstrings + s->sh_name) == 0) && + (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) { + dest = l2_sram_alloc(s->sh_size); + mod->arch.data_l2 = dest; + if (dest == NULL) { + printk(KERN_ERR + "module %s: L2 SRAM allocation failed\n", + mod->name); + return -1; + } + memcpy(dest, (void *)s->sh_addr, s->sh_size); + s->sh_flags &= ~SHF_ALLOC; + s->sh_addr = (unsigned long)dest; + } + if (strcmp(".l2.bss", secstrings + s->sh_name) == 0 || + ((strcmp(".bss", secstrings + s->sh_name) == 0) && + (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) { + dest = l2_sram_alloc(s->sh_size); + mod->arch.bss_l2 = dest; + if (dest == NULL) { + printk(KERN_ERR + "module %s: L2 SRAM allocation failed\n", + mod->name); + return -1; + } + memset(dest, 0, s->sh_size); + s->sh_flags &= ~SHF_ALLOC; + s->sh_addr = (unsigned long)dest; + } } return 0; } @@ -411,9 +456,10 @@ module_finalize(const Elf_Ehdr * hdr, continue; if ((sechdrs[i].sh_type == SHT_RELA) && - ((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) || + ((strcmp(".rela.l2.text", secstrings + sechdrs[i].sh_name) == 0) || + (strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) || ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) && - (hdr->e_flags & FLG_CODE_IN_L1)))) { + (hdr->e_flags & (EF_BFIN_CODE_IN_L1|EF_BFIN_CODE_IN_L2))))) { apply_relocate_add((Elf_Shdr *) sechdrs, strtab, symindex, i, mod); } @@ -423,14 +469,12 @@ module_finalize(const Elf_Ehdr * hdr, void module_arch_cleanup(struct module *mod) { - if (mod->arch.text_l1) - l1_inst_sram_free((void *)mod->arch.text_l1); - if (mod->arch.data_a_l1) - l1_data_sram_free((void *)mod->arch.data_a_l1); - if (mod->arch.bss_a_l1) - l1_data_sram_free((void *)mod->arch.bss_a_l1); - if (mod->arch.data_b_l1) - l1_data_B_sram_free((void *)mod->arch.data_b_l1); - if (mod->arch.bss_b_l1) - l1_data_B_sram_free((void *)mod->arch.bss_b_l1); + l1_inst_sram_free(mod->arch.text_l1); + l1_data_A_sram_free(mod->arch.data_a_l1); + l1_data_A_sram_free(mod->arch.bss_a_l1); + l1_data_B_sram_free(mod->arch.data_b_l1); + l1_data_B_sram_free(mod->arch.bss_b_l1); + l2_sram_free(mod->arch.text_l2); + l2_sram_free(mod->arch.data_l2); + l2_sram_free(mod->arch.bss_l2); } diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index f51ab088098..bf1a51d8e60 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -220,6 +220,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) copied = sizeof(tmp); } else #endif +#if L1_DATA_A_LENGTH != 0 + if (addr + add >= L1_DATA_A_START + && addr + add + sizeof(tmp) <= L1_DATA_A_START + L1_DATA_A_LENGTH) { + memcpy(&tmp, (const void *)(addr + add), sizeof(tmp)); + copied = sizeof(tmp); + } else +#endif +#if L1_DATA_B_LENGTH != 0 + if (addr + add >= L1_DATA_B_START + && addr + add + sizeof(tmp) <= L1_DATA_B_START + L1_DATA_B_LENGTH) { + memcpy(&tmp, (const void *)(addr + add), sizeof(tmp)); + copied = sizeof(tmp); + } else +#endif if (addr + add >= FIXED_CODE_START && addr + add + sizeof(tmp) <= FIXED_CODE_END) { memcpy(&tmp, (const void *)(addr + add), sizeof(tmp)); @@ -290,6 +304,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) copied = sizeof(data); } else #endif +#if L1_DATA_A_LENGTH != 0 + if (addr + add >= L1_DATA_A_START + && addr + add + sizeof(data) <= L1_DATA_A_START + L1_DATA_A_LENGTH) { + memcpy((void *)(addr + add), &data, sizeof(data)); + copied = sizeof(data); + } else +#endif +#if L1_DATA_B_LENGTH != 0 + if (addr + add >= L1_DATA_B_START + && addr + add + sizeof(data) <= L1_DATA_B_START + L1_DATA_B_LENGTH) { + memcpy((void *)(addr + add), &data, sizeof(data)); + copied = sizeof(data); + } else +#endif if (addr + add >= FIXED_CODE_START && addr + add + sizeof(data) <= FIXED_CODE_END) { memcpy((void *)(addr + add), &data, sizeof(data)); diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 8efea004aec..23e637eb78d 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -104,6 +104,7 @@ void __init bf53x_relocate_l1_mem(void) unsigned long l1_code_length; unsigned long l1_data_a_length; unsigned long l1_data_b_length; + unsigned long l2_length; l1_code_length = _etext_l1 - _stext_l1; if (l1_code_length > L1_CODE_LENGTH) @@ -129,6 +130,15 @@ void __init bf53x_relocate_l1_mem(void) /* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */ dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + l1_data_a_length, l1_data_b_length); + +#ifdef L2_LENGTH + l2_length = _ebss_l2 - _stext_l2; + if (l2_length > L2_LENGTH) + panic("L2 SRAM Overflow\n"); + + /* Copy _stext_l2 to _edata_l2 to L2 SRAM */ + dma_memcpy(_stext_l2, _l2_lma_start, l2_length); +#endif } /* add_memory_region to memmap */ @@ -664,11 +674,8 @@ static __init void setup_bootmem_allocator(void) }) static inline int __init get_mem_size(void) { -#ifdef CONFIG_MEM_SIZE - return CONFIG_MEM_SIZE; -#else -# if defined(EBIU_SDBCTL) -# if defined(BF561_FAMILY) +#if defined(EBIU_SDBCTL) +# if defined(BF561_FAMILY) int ret = 0; u32 sdbctl = bfin_read_EBIU_SDBCTL(); ret += EBSZ_TO_MEG(sdbctl >> 0); @@ -676,10 +683,10 @@ static inline int __init get_mem_size(void) ret += EBSZ_TO_MEG(sdbctl >> 16); ret += EBSZ_TO_MEG(sdbctl >> 24); return ret; -# else +# else return EBSZ_TO_MEG(bfin_read_EBIU_SDBCTL()); -# endif -# elif defined(EBIU_DDRCTL1) +# endif +#elif defined(EBIU_DDRCTL1) u32 ddrctl = bfin_read_EBIU_DDRCTL1(); int ret = 0; switch (ddrctl & 0xc0000) { @@ -693,8 +700,9 @@ static inline int __init get_mem_size(void) case DEVWD_8: ret *= 2; case DEVWD_16: break; } + if ((ddrctl & 0xc000) == 0x4000) + ret *= 2; return ret; -# endif #endif BUG(); } @@ -763,6 +771,9 @@ void __init setup_arch(char **cmdline_p) _bfin_swrst = bfin_read_SWRST(); + /* If we double fault, reset the system - otherwise we hang forever */ + bfin_write_SWRST(DOUBLE_FAULT); + if (_bfin_swrst & RESET_DOUBLE) printk(KERN_INFO "Recovering from Double Fault event\n"); else if (_bfin_swrst & RESET_WDOG) @@ -842,38 +853,55 @@ static int __init topology_init(void) subsys_initcall(topology_init); +/* Get the voltage input multiplier */ +static u_long cached_vco_pll_ctl, cached_vco; static u_long get_vco(void) { u_long msel; - u_long vco; - msel = (bfin_read_PLL_CTL() >> 9) & 0x3F; + u_long pll_ctl = bfin_read_PLL_CTL(); + if (pll_ctl == cached_vco_pll_ctl) + return cached_vco; + else + cached_vco_pll_ctl = pll_ctl; + + msel = (pll_ctl >> 9) & 0x3F; if (0 == msel) msel = 64; - vco = CONFIG_CLKIN_HZ; - vco >>= (1 & bfin_read_PLL_CTL()); /* DF bit */ - vco = msel * vco; - return vco; + cached_vco = CONFIG_CLKIN_HZ; + cached_vco >>= (1 & pll_ctl); /* DF bit */ + cached_vco *= msel; + return cached_vco; } /* Get the Core clock */ +static u_long cached_cclk_pll_div, cached_cclk; u_long get_cclk(void) { u_long csel, ssel; + if (bfin_read_PLL_STAT() & 0x1) return CONFIG_CLKIN_HZ; ssel = bfin_read_PLL_DIV(); + if (ssel == cached_cclk_pll_div) + return cached_cclk; + else + cached_cclk_pll_div = ssel; + csel = ((ssel >> 4) & 0x03); ssel &= 0xf; if (ssel && ssel < (1 << csel)) /* SCLK > CCLK */ - return get_vco() / ssel; - return get_vco() >> csel; + cached_cclk = get_vco() / ssel; + else + cached_cclk = get_vco() >> csel; + return cached_cclk; } EXPORT_SYMBOL(get_cclk); /* Get the System clock */ +static u_long cached_sclk_pll_div, cached_sclk; u_long get_sclk(void) { u_long ssel; @@ -881,13 +909,20 @@ u_long get_sclk(void) if (bfin_read_PLL_STAT() & 0x1) return CONFIG_CLKIN_HZ; - ssel = (bfin_read_PLL_DIV() & 0xf); + ssel = bfin_read_PLL_DIV(); + if (ssel == cached_sclk_pll_div) + return cached_sclk; + else + cached_sclk_pll_div = ssel; + + ssel &= 0xf; if (0 == ssel) { printk(KERN_WARNING "Invalid System Clock\n"); ssel = 1; } - return get_vco() / ssel; + cached_sclk = get_vco() / ssel; + return cached_sclk; } EXPORT_SYMBOL(get_sclk); @@ -916,7 +951,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) uint32_t revid; u_long cclk = 0, sclk = 0; - u_int dcache_size = 0, dsup_banks = 0; + u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0; cpu = CPU; mmu = "none"; @@ -985,12 +1020,15 @@ static int show_cpuinfo(struct seq_file *m, void *v) } /* Is it turned on? */ - if (!((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE))) + if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE)) dcache_size = 0; + if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) == (IMC | ENICPLB)) + icache_size = 0; + seq_printf(m, "cache size\t: %d KB(L1 icache) " "%d KB(L1 dcache-%s) %d KB(L2 cache)\n", - BFIN_ICACHESIZE / 1024, dcache_size, + icache_size, dcache_size, #if defined CONFIG_BFIN_WB "wb" #elif defined CONFIG_BFIN_WT @@ -1000,8 +1038,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "%s\n", cache); - seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n", - BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES); + if (icache_size) + seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n", + BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES); + else + seq_printf(m, "icache setup\t: off\n"); + seq_printf(m, "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n", dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS, diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index f061f518162..ad922ab9154 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -69,8 +69,6 @@ void __init trap_init(void) unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr; -int kstack_depth_to_print = 48; - static void decode_address(char *buf, unsigned long address) { struct vm_list_struct *vml; @@ -163,6 +161,9 @@ static void decode_address(char *buf, unsigned long address) if (!in_atomic) mmput(mm); + if (!strlen(buf)) + sprintf(buf, "<0x%p> [ %s ] dynamic memory", (void *)address, name); + goto done; } @@ -173,7 +174,7 @@ static void decode_address(char *buf, unsigned long address) } /* we were unable to find this address anywhere */ - sprintf(buf, "<0x%p> /* unknown address */", (void *)address); + sprintf(buf, "<0x%p> /* kernel dynamic memory */", (void *)address); done: write_unlock_irqrestore(&tasklist_lock, flags); @@ -494,7 +495,7 @@ asmlinkage void trap_c(struct pt_regs *fp) BUG_ON(sig == 0); if (sig != SIGTRAP) { - unsigned long stack; + unsigned long *stack; dump_bfin_process(fp); dump_bfin_mem(fp); show_regs(fp); @@ -508,14 +509,23 @@ asmlinkage void trap_c(struct pt_regs *fp) else #endif dump_bfin_trace_buffer(); - show_stack(current, &stack); + if (oops_in_progress) { + /* Dump the current kernel stack */ + printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n"); + show_stack(current, NULL); + print_modules(); #ifndef CONFIG_ACCESS_CHECK printk(KERN_EMERG "Please turn on " "CONFIG_ACCESS_CHECK\n"); #endif panic("Kernel exception"); + } else { + /* Dump the user space stack */ + stack = (unsigned long *)rdusp(); + printk(KERN_NOTICE "Userspace Stack\n"); + show_stack(NULL, stack); } } @@ -532,11 +542,71 @@ asmlinkage void trap_c(struct pt_regs *fp) #define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1) +/* + * Similar to get_user, do some address checking, then dereference + * Return true on sucess, false on bad address + */ +bool get_instruction(unsigned short *val, unsigned short *address) +{ + + unsigned long addr; + + addr = (unsigned long)address; + + /* Check for odd addresses */ + if (addr & 0x1) + return false; + + /* Check that things do not wrap around */ + if (addr > (addr + 2)) + return false; + + /* + * Since we are in exception context, we need to do a little address checking + * We need to make sure we are only accessing valid memory, and + * we don't read something in the async space that can hang forever + */ + if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) || +#ifdef L2_START + (addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) || +#endif + (addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) || +#if L1_DATA_A_LENGTH != 0 + (addr >= L1_DATA_A_START && (addr + 2) <= (L1_DATA_A_START + L1_DATA_A_LENGTH)) || +#endif +#if L1_DATA_B_LENGTH != 0 + (addr >= L1_DATA_B_START && (addr + 2) <= (L1_DATA_B_START + L1_DATA_B_LENGTH)) || +#endif + (addr >= L1_SCRATCH_START && (addr + 2) <= (L1_SCRATCH_START + L1_SCRATCH_LENGTH)) || + (!(bfin_read_EBIU_AMBCTL0() & B0RDYEN) && + addr >= ASYNC_BANK0_BASE && (addr + 2) <= (ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)) || + (!(bfin_read_EBIU_AMBCTL0() & B1RDYEN) && + addr >= ASYNC_BANK1_BASE && (addr + 2) <= (ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)) || + (!(bfin_read_EBIU_AMBCTL1() & B2RDYEN) && + addr >= ASYNC_BANK2_BASE && (addr + 2) <= (ASYNC_BANK2_BASE + ASYNC_BANK1_SIZE)) || + (!(bfin_read_EBIU_AMBCTL1() & B3RDYEN) && + addr >= ASYNC_BANK3_BASE && (addr + 2) <= (ASYNC_BANK3_BASE + ASYNC_BANK1_SIZE))) { + *val = *address; + return true; + } + +#if L1_CODE_LENGTH != 0 + if (addr >= L1_CODE_START && (addr + 2) <= (L1_CODE_START + L1_CODE_LENGTH)) { + dma_memcpy(val, address, 2); + return true; + } +#endif + + + return false; +} + void dump_bfin_trace_buffer(void) { #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON int tflags, i = 0; char buf[150]; + unsigned short val = 0, *addr; #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND int j, index; #endif @@ -549,8 +619,42 @@ void dump_bfin_trace_buffer(void) for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) { decode_address(buf, (unsigned long)bfin_read_TBUF()); printk(KERN_NOTICE "%4i Target : %s\n", i, buf); - decode_address(buf, (unsigned long)bfin_read_TBUF()); - printk(KERN_NOTICE " Source : %s\n", buf); + addr = (unsigned short *)bfin_read_TBUF(); + decode_address(buf, (unsigned long)addr); + printk(KERN_NOTICE " Source : %s ", buf); + if (get_instruction(&val, addr)) { + if (val == 0x0010) + printk("RTS"); + else if (val == 0x0011) + printk("RTI"); + else if (val == 0x0012) + printk("RTX"); + else if (val >= 0x0050 && val <= 0x0057) + printk("JUMP (P%i)", val & 7); + else if (val >= 0x0060 && val <= 0x0067) + printk("CALL (P%i)", val & 7); + else if (val >= 0x0070 && val <= 0x0077) + printk("CALL (PC+P%i)", val & 7); + else if (val >= 0x0080 && val <= 0x0087) + printk("JUMP (PC+P%i)", val & 7); + else if ((val >= 0x1000 && val <= 0x13FF) || + (val >= 0x1800 && val <= 0x1BFF)) + printk("IF !CC JUMP"); + else if ((val >= 0x1400 && val <= 0x17ff) || + (val >= 0x1c00 && val <= 0x1fff)) + printk("IF CC JUMP"); + else if (val >= 0x2000 && val <= 0x2fff) + printk("JUMP.S"); + else if (val >= 0xe080 && val <= 0xe0ff) + printk("LSETUP"); + else if (val >= 0xe200 && val <= 0xe2ff) + printk("JUMP.L"); + else if (val >= 0xe300 && val <= 0xe3ff) + printk("CALL pcrel"); + else + printk("0x%04x", val); + } + printk("\n"); } } @@ -582,59 +686,151 @@ void dump_bfin_trace_buffer(void) } EXPORT_SYMBOL(dump_bfin_trace_buffer); -static void show_trace(struct task_struct *tsk, unsigned long *sp) +/* + * Checks to see if the address pointed to is either a + * 16-bit CALL instruction, or a 32-bit CALL instruction + */ +bool is_bfin_call(unsigned short *addr) { - unsigned long addr; + unsigned short opcode = 0, *ins_addr; + ins_addr = (unsigned short *)addr; - printk(KERN_NOTICE "\n" KERN_NOTICE "Call Trace:\n"); - - while (!kstack_end(sp)) { - addr = *sp++; - /* - * If the address is either in the text segment of the - * kernel, or in the region which contains vmalloc'ed - * memory, it *may* be the address of a calling - * routine; if so, print it so that someone tracing - * down the cause of the crash will be able to figure - * out the call path that was taken. - */ - if (kernel_text_address(addr)) - print_ip_sym(addr); - } + if (!get_instruction(&opcode, ins_addr)) + return false; - printk(KERN_NOTICE "\n"); -} + if ((opcode >= 0x0060 && opcode <= 0x0067) || + (opcode >= 0x0070 && opcode <= 0x0077)) + return true; + + ins_addr--; + if (!get_instruction(&opcode, ins_addr)) + return false; + if (opcode >= 0xE300 && opcode <= 0xE3FF) + return true; + + return false; + +} void show_stack(struct task_struct *task, unsigned long *stack) { - unsigned long *endstack, addr; - int i; + unsigned int *addr, *endstack, *fp = 0, *frame; + unsigned short *ins_addr; + char buf[150]; + unsigned int i, j, ret_addr, frame_no = 0; - /* Cannot call dump_bfin_trace_buffer() here as show_stack() is - * called externally in some places in the kernel. + /* + * If we have been passed a specific stack, use that one otherwise + * if we have been passed a task structure, use that, otherwise + * use the stack of where the variable "stack" exists */ - if (!stack) { - if (task) + if (stack == NULL) { + if (task) { + /* We know this is a kernel stack, so this is the start/end */ stack = (unsigned long *)task->thread.ksp; - else + endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE); + } else { + /* print out the existing stack info */ stack = (unsigned long *)&stack; + endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack); + } + } else + endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack); + + decode_address(buf, (unsigned int)stack); + printk(KERN_NOTICE "Stack info:\n" KERN_NOTICE " SP: [0x%p] %s\n", stack, buf); + addr = (unsigned int *)((unsigned int)stack & ~0x3F); + + /* First thing is to look for a frame pointer */ + for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0; + addr < endstack; addr++, i++) { + if (*addr & 0x1) + continue; + ins_addr = (unsigned short *)*addr; + ins_addr--; + if (is_bfin_call(ins_addr)) + fp = addr - 1; + + if (fp) { + /* Let's check to see if it is a frame pointer */ + while (fp >= (addr - 1) && fp < endstack && fp) + fp = (unsigned int *)*fp; + if (fp == 0 || fp == endstack) { + fp = addr - 1; + break; + } + fp = 0; + } } + if (fp) { + frame = fp; + printk(" FP: (0x%p)\n", fp); + } else + frame = 0; - addr = (unsigned long)stack; - endstack = (unsigned long *)PAGE_ALIGN(addr); + /* + * Now that we think we know where things are, we + * walk the stack again, this time printing things out + * incase there is no frame pointer, we still look for + * valid return addresses + */ - printk(KERN_NOTICE "Stack from %08lx:", (unsigned long)stack); - for (i = 0; i < kstack_depth_to_print; i++) { - if (stack + 1 > endstack) - break; - if (i % 8 == 0) - printk("\n" KERN_NOTICE " "); - printk(" %08lx", *stack++); + /* First time print out data, next time, print out symbols */ + for (j = 0; j <= 1; j++) { + if (j) + printk(KERN_NOTICE "Return addresses in stack:\n"); + else + printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack); + + fp = frame; + frame_no = 0; + + for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0; + addr <= endstack; addr++, i++) { + + ret_addr = 0; + if (!j && i % 8 == 0) + printk("\n" KERN_NOTICE "%p:",addr); + + /* if it is an odd address, or zero, just skip it */ + if (*addr & 0x1 || !*addr) + goto print; + + ins_addr = (unsigned short *)*addr; + + /* Go back one instruction, and see if it is a CALL */ + ins_addr--; + ret_addr = is_bfin_call(ins_addr); + print: + if (!j && stack == (unsigned long *)addr) + printk("[%08x]", *addr); + else if (ret_addr) + if (j) { + decode_address(buf, (unsigned int)*addr); + if (frame == addr) { + printk(KERN_NOTICE " frame %2i : %s\n", frame_no, buf); + continue; + } + printk(KERN_NOTICE " address : %s\n", buf); + } else + printk("<%08x>", *addr); + else if (fp == addr) { + if (j) + frame = addr+1; + else + printk("(%08x)", *addr); + + fp = (unsigned int *)*addr; + frame_no++; + + } else if (!j) + printk(" %08x ", *addr); + } + if (!j) + printk("\n"); } - printk("\n"); - show_trace(task, stack); } void dump_stack(void) @@ -715,19 +911,9 @@ void dump_bfin_mem(struct pt_regs *fp) if (!((unsigned long)addr & 0xF)) printk("\n" KERN_NOTICE "0x%p: ", addr); - if (get_user(val, addr)) { - if (addr >= (unsigned short *)L1_CODE_START && - addr < (unsigned short *)(L1_CODE_START + L1_CODE_LENGTH)) { - dma_memcpy(&val, addr, sizeof(val)); - sprintf(buf, "%04x", val); - } else if (addr >= (unsigned short *)FIXED_CODE_START && - addr <= (unsigned short *)memory_start) { - val = bfin_read16(addr); - sprintf(buf, "%04x", val); - } else { + if (get_instruction(&val, addr)) { val = 0; sprintf(buf, "????"); - } } else sprintf(buf, "%04x", val); diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 3ecc64cab3b..0896e38d610 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -101,6 +101,11 @@ SECTIONS #if !L1_DATA_B_LENGTH *(.l1.data.B) #endif +#ifndef L2_LENGTH + . = ALIGN(32); + *(.data_l2.cacheline_aligned) + *(.l2.data) +#endif DATA_DATA *(.data.*) @@ -182,14 +187,13 @@ SECTIONS *(.l1.data) __edata_l1 = .; - . = ALIGN(4); - __sbss_l1 = .; - *(.l1.bss) - . = ALIGN(32); *(.data_l1.cacheline_aligned) . = ALIGN(4); + __sbss_l1 = .; + *(.l1.bss) + . = ALIGN(4); __ebss_l1 = .; } @@ -203,11 +207,37 @@ SECTIONS . = ALIGN(4); __sbss_b_l1 = .; *(.l1.bss.B) - . = ALIGN(4); __ebss_b_l1 = .; } +#ifdef L2_LENGTH + __l2_lma_start = .; + + .text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1)) + { + . = ALIGN(4); + __stext_l2 = .; + *(.l1.text) + . = ALIGN(4); + __etext_l2 = .; + + . = ALIGN(4); + __sdata_l2 = .; + *(.l1.data) + __edata_l2 = .; + + . = ALIGN(32); + *(.data_l2.cacheline_aligned) + + . = ALIGN(4); + __sbss_l2 = .; + *(.l1.bss) + . = ALIGN(4); + __ebss_l2 = .; + } +#endif + /* Force trailing alignment of our init section so that when we * free our init memory, we don't leave behind a partial page. */ diff --git a/arch/blackfin/mach-bf527/boards/Kconfig b/arch/blackfin/mach-bf527/boards/Kconfig index 6a570ad0374..8bf9e58f014 100644 --- a/arch/blackfin/mach-bf527/boards/Kconfig +++ b/arch/blackfin/mach-bf527/boards/Kconfig @@ -9,4 +9,9 @@ config BFIN527_EZKIT help BF527-EZKIT-LITE board support. +config BFIN527_BLUETECHNIX_CM + bool "Bluetechnix CM-BF527" + help + CM-BF527 support for EVAL- and DEV-Board. + endchoice diff --git a/arch/blackfin/mach-bf527/boards/Makefile b/arch/blackfin/mach-bf527/boards/Makefile index 7277d35ef11..7ba7d256bbb 100644 --- a/arch/blackfin/mach-bf527/boards/Makefile +++ b/arch/blackfin/mach-bf527/boards/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_BFIN527_EZKIT) += ezkit.o +obj-$(CONFIG_BFIN527_BLUETECHNIX_CM) += cm_bf527.o diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c new file mode 100644 index 00000000000..0b26ae2de5e --- /dev/null +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -0,0 +1,1011 @@ +/* + * File: arch/blackfin/mach-bf527/boards/cm-bf527.c + * Based on: arch/blackfin/mach-bf537/boards/stamp.c + * Author: Aidan Williams <aidan@nicta.com.au> + * + * Created: + * Description: + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/etherdevice.h> +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include <linux/usb/isp1362.h> +#endif +#include <linux/pata_platform.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/usb/sl811.h> +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#include <linux/usb/musb.h> +#endif +#include <asm/cplb.h> +#include <asm/dma.h> +#include <asm/bfin5xx_spi.h> +#include <asm/reboot.h> +#include <asm/nand.h> +#include <asm/portmux.h> +#include <asm/dpmc.h> +#include <linux/spi/ad7877.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "Bluetechnix CM-BF527"; + +/* + * Driver needs to know address, irq and flag pin. + */ + +#define ISP1761_BASE 0x203C0000 +#define ISP1761_IRQ IRQ_PF7 + +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +static struct resource bfin_isp1761_resources[] = { + [0] = { + .name = "isp1761-regs", + .start = ISP1761_BASE + 0x00000000, + .end = ISP1761_BASE + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ISP1761_IRQ, + .end = ISP1761_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_isp1761_device = { + .name = "isp1761", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_isp1761_resources), + .resource = bfin_isp1761_resources, +}; + +static struct platform_device *bfin_isp1761_devices[] = { + &bfin_isp1761_device, +}; + +int __init bfin_isp1761_init(void) +{ + unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); + + printk(KERN_INFO "%s(): registering device resources\n", __func__); + set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); + + return platform_add_devices(bfin_isp1761_devices, num_devices); +} + +void __exit bfin_isp1761_exit(void) +{ + platform_device_unregister(&bfin_isp1761_device); +} + +arch_initcall(bfin_isp1761_init); +#endif + +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +static struct resource musb_resources[] = { + [0] = { + .start = 0xffc03800, + .end = 0xffc03cff, + .flags = IORESOURCE_MEM, + }, + [1] = { /* general IRQ */ + .start = IRQ_USB_INT0, + .end = IRQ_USB_INT0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, + [2] = { /* DMA IRQ */ + .start = IRQ_USB_DMA, + .end = IRQ_USB_DMA, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct musb_hdrc_platform_data musb_plat = { +#if defined(CONFIG_USB_MUSB_OTG) + .mode = MUSB_OTG, +#elif defined(CONFIG_USB_MUSB_HDRC_HCD) + .mode = MUSB_HOST, +#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) + .mode = MUSB_PERIPHERAL, +#endif + .multipoint = 0, +}; + +static u64 musb_dmamask = ~(u32)0; + +static struct platform_device musb_device = { + .name = "musb_hdrc", + .id = 0, + .dev = { + .dma_mask = &musb_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &musb_plat, + }, + .num_resources = ARRAY_SIZE(musb_resources), + .resource = musb_resources, +}; +#endif + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition ezkit_partitions[] = { + { + .name = "Bootloader", + .size = 0x40000, + .offset = 0, + }, { + .name = "Kernel", + .size = 0x1C0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "RootFS", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data ezkit_flash_data = { + .width = 2, + .parts = ezkit_partitions, + .nr_parts = ARRAY_SIZE(ezkit_partitions), +}; + +static struct resource ezkit_flash_resource = { + .start = 0x20000000, + .end = 0x201fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ezkit_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ezkit_flash_data, + }, + .num_resources = 1, + .resource = &ezkit_flash_resource, +}; +#endif + +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +static struct mtd_partition partition_info[] = { + { + .name = "Linux Kernel", + .offset = 0, + .size = 4 * SIZE_1M, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct bf5xx_nand_platform bf5xx_nand_platform = { + .page_size = NFC_PG_SIZE_256, + .data_width = NFC_NWIDTH_8, + .partitions = partition_info, + .nr_partitions = ARRAY_SIZE(partition_info), + .rd_dly = 3, + .wr_dly = 3, +}; + +static struct resource bf5xx_nand_resources[] = { + { + .start = NFC_CTL, + .end = NFC_DATA_RD + 2, + .flags = IORESOURCE_MEM, + }, + { + .start = CH_NFC, + .end = CH_NFC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf5xx_nand_device = { + .name = "bf5xx-nand", + .id = 0, + .num_resources = ARRAY_SIZE(bf5xx_nand_resources), + .resource = bf5xx_nand_resources, + .dev = { + .platform_data = &bf5xx_nand_platform, + }, +}; +#endif + +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +static struct resource bfin_pcmcia_cf_resources[] = { + { + .start = 0x20310000, /* IO PORT */ + .end = 0x20312000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20311000, /* Attribute Memory */ + .end = 0x20311FFF, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF4, + .end = IRQ_PF4, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, { + .start = 6, /* Card Detect PF6 */ + .end = 6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pcmcia_cf_device = { + .name = "bfin_cf_pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), + .resource = bfin_pcmcia_cf_resources, +}; +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .name = "smc91x-regs", + .start = 0x20300300, + .end = 0x20300300 + 16, + .flags = IORESOURCE_MEM, + }, { + + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource dm9000_resources[] = { + [0] = { + .start = 0x203FB800, + .end = 0x203FB800 + 8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF9, + .end = IRQ_PF9, + .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), + }, +}; + +static struct platform_device dm9000_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(dm9000_resources), + .resource = dm9000_resources, +}; +#endif + +#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) +static struct resource sl811_hcd_resources[] = { + { + .start = 0x20340000, + .end = 0x20340000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20340004, + .end = 0x20340004, + .flags = IORESOURCE_MEM, + }, { + .start = CONFIG_USB_SL811_BFIN_IRQ, + .end = CONFIG_USB_SL811_BFIN_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) +void sl811_port_power(struct device *dev, int is_on) +{ + gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); +} +#endif + +static struct sl811_platform_data sl811_priv = { + .potpg = 10, + .power = 250, /* == 500mA */ +#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) + .port_power = &sl811_port_power, +#endif +}; + +static struct platform_device sl811_hcd_device = { + .name = "sl811-hcd", + .id = 0, + .dev = { + .platform_data = &sl811_priv, + }, + .num_resources = ARRAY_SIZE(sl811_hcd_resources), + .resource = sl811_hcd_resources, +}; +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x20360000, + .end = 0x20360000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20360004, + .end = 0x20360004, + .flags = IORESOURCE_MEM, + }, { + .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, + .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mac_device = { + .name = "bfin_mac", +}; +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x20300000, + .end = 0x20300000 + 0x100, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, +}; +#endif + +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p16", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_ADC_BF533) \ + || defined(CONFIG_SPI_ADC_BF533_MODULE) +/* SPI ADC chip */ +static struct bfin5xx_spi_chip spi_adc_chip_info = { + .enable_dma = 1, /* use dma transfer with this chip*/ + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) +static struct bfin5xx_spi_chip ad9960_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_PBX) +static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { + .ctl_reg = 0x4, /* send zero */ + .enable_dma = 0, + .bits_per_word = 8, + .cs_change_per_word = 1, +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +static struct bfin5xx_spi_chip spi_ad7877_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; + +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + +#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ + && defined(CONFIG_SND_SOC_WM8731_SPI) +static struct bfin5xx_spi_chip spi_wm8731_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +static struct bfin5xx_spi_chip spidev_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_ADC_BF533) \ + || defined(CONFIG_SPI_ADC_BF533_MODULE) + { + .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_adc_chip_info, + }, +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) + { + .modalias = "ad9960-spi", + .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &ad9960_spi_chip_info, + }, +#endif +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_PBX) + { + .modalias = "fxs-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 8 - CONFIG_J11_JUMPER, + .controller_data = &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "fxo-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 8 - CONFIG_J19_JUMPER, + .controller_data = &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) + { + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PF8, + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .controller_data = &spi_ad7877_chip_info, + }, +#endif +#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ + && defined(CONFIG_SND_SOC_WM8731_SPI) + { + .modalias = "wm8731", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, + .controller_data = &spi_wm8731_chip_info, + .mode = SPI_MODE_0, + }, +#endif +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &spidev_chip_info, + }, +#endif +}; + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +static struct platform_device bfin_fb_adv7393_device = { + .name = "bfin-adv7393", +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; +#endif + +#ifdef CONFIG_I2C_BOARDINFO +static struct i2c_board_info __initdata bfin_i2c_board_info[] = { +#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) + { + I2C_BOARD_INFO("pcf8574_lcd", 0x22), + .type = "pcf8574_lcd", + }, +#endif +#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) + { + I2C_BOARD_INFO("pcf8574_keypad", 0x27), + .type = "pcf8574_keypad", + .irq = IRQ_PF8, + }, +#endif +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + +static const unsigned int cclk_vlev_datasheet[] = +{ + VRPAIR(VLEV_100, 400000000), + VRPAIR(VLEV_105, 426000000), + VRPAIR(VLEV_110, 500000000), + VRPAIR(VLEV_115, 533000000), + VRPAIR(VLEV_120, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */, +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +static struct platform_device *stamp_devices[] __initdata = { + + &bfin_dpmc, + +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) + &bf5xx_nand_device, +#endif + +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) + &bfin_pcmcia_cf_device, +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) + &sl811_hcd_device, +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) + &isp1362_hcd_device, +#endif + +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) + &musb_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) + &dm9000_device, +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mac_device, +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + &net2272_bfin_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, +#endif + +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + &bfin_fb_adv7393_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) + &ezkit_flash_device, +#endif + + &bfin_gpios_device, +}; + +static int __init stamp_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); +#endif + + platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif + return 0; +} + +arch_initcall(stamp_init); + +void native_machine_restart(char *cmd) +{ + /* workaround reboot hang when booting from SPI */ + if ((bfin_read_SYSCR() & 0x7) == 0x3) + bfin_gpio_reset_spi0_ssel1(); +} + +void bfin_get_ether_addr(char *addr) +{ + random_ether_addr(addr); + printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); +} +EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S index 57bdb3ba2fe..fe05cc1ef17 100644 --- a/arch/blackfin/mach-bf527/head.S +++ b/arch/blackfin/mach-bf527/head.S @@ -32,7 +32,7 @@ #include <asm/blackfin.h> #include <asm/trace.h> -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif @@ -185,7 +185,7 @@ ENTRY(__start) /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bf53x_relocate_l1_mem; -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK call _start_dma_code; #endif @@ -318,7 +318,7 @@ ENDPROC(_real_start) __FINIT .section .l1.text -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) /* Enable PHY CLK buffer output */ @@ -398,12 +398,6 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.l = LO(EBIU_SDBCTL); - p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */ - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - P2.H = hi(EBIU_SDGCTL); P2.L = lo(EBIU_SDGCTL); R0 = [P2]; diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 1295deac00a..c671e8549b1 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -31,7 +31,7 @@ #include <linux/init.h> #include <asm/blackfin.h> #include <asm/trace.h> -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif @@ -186,7 +186,7 @@ ENTRY(__start) /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bf53x_relocate_l1_mem; -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK call _start_dma_code; #endif @@ -319,7 +319,7 @@ ENDPROC(_real_start) __FINIT .section .l1.text -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) p0.h = hi(SIC_IWR); p0.l = lo(SIC_IWR); @@ -390,12 +390,6 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.l = LO(EBIU_SDBCTL); - p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */ - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - P2.H = hi(EBIU_SDGCTL); P2.L = lo(EBIU_SDGCTL); R0 = [P2]; diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 671f9d67f23..6dbc76fb080 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -29,9 +29,12 @@ */ #include <linux/device.h> +#include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/plat-ram.h> #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> @@ -355,6 +358,84 @@ static struct platform_device net2272_bfin_device = { }; #endif +#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) +#ifdef CONFIG_MTD_PARTITIONS +const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; + +static struct mtd_partition bfin_plat_nand_partitions[] = { + { + .name = "linux kernel", + .size = 0x400000, + .offset = 0, + }, { + .name = "file system", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; +#endif + +#define BFIN_NAND_PLAT_CLE 2 +#define BFIN_NAND_PLAT_ALE 1 +static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE)); + else + writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE)); +} + +#define BFIN_NAND_PLAT_READY GPIO_PF3 +static int bfin_plat_nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(BFIN_NAND_PLAT_READY); +} + +static struct platform_nand_data bfin_plat_nand_data = { + .chip = { + .chip_delay = 30, +#ifdef CONFIG_MTD_PARTITIONS + .part_probe_types = part_probes, + .partitions = bfin_plat_nand_partitions, + .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), +#endif + }, + .ctrl = { + .cmd_ctrl = bfin_plat_nand_cmd_ctrl, + .dev_ready = bfin_plat_nand_dev_ready, + }, +}; + +#define MAX(x, y) (x > y ? x : y) +static struct resource bfin_plat_nand_resources = { + .start = 0x20212000, + .end = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)), + .flags = IORESOURCE_IO, +}; + +static struct platform_device bfin_async_nand_device = { + .name = "gen_nand", + .id = -1, + .num_resources = 1, + .resource = &bfin_plat_nand_resources, + .dev = { + .platform_data = &bfin_plat_nand_data, + }, +}; + +static void bfin_plat_nand_init(void) +{ + gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat"); +} +#else +static void bfin_plat_nand_init(void) {} +#endif + #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition stamp_partitions[] = { { @@ -780,7 +861,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 +#define PATA_INT IRQ_PF5 static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 1, @@ -922,6 +1003,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_gpios_device, +#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) + &bfin_async_nand_device, +#endif + #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &stamp_flash_device, #endif @@ -936,6 +1021,7 @@ static int __init stamp_init(void) ARRAY_SIZE(bfin_i2c_board_info)); #endif + bfin_plat_nand_init(); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 48cd58a410a..6b019eaee0b 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -32,7 +32,7 @@ #include <asm/blackfin.h> #include <asm/trace.h> -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif @@ -217,7 +217,7 @@ ENTRY(__start) /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bf53x_relocate_l1_mem; -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK call _start_dma_code; #endif @@ -350,7 +350,7 @@ ENDPROC(_real_start) __FINIT .section .l1.text -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) /* Enable PHY CLK buffer output */ @@ -430,12 +430,6 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.l = LO(EBIU_SDBCTL); - p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */ - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - P2.H = hi(EBIU_SDGCTL); P2.L = lo(EBIU_SDGCTL); R0 = [P2]; diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index af7c211a580..166fa2201ee 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -61,6 +61,49 @@ const char bfin_board_name[] = "ADSP-BF548-EZKIT"; * Driver needs to know address, irq and flag pin. */ +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +static struct resource bfin_isp1761_resources[] = { + [0] = { + .name = "isp1761-regs", + .start = 0x2C0C0000, + .end = 0x2C0C0000 + 0xfffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PG7, + .end = IRQ_PG7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_isp1761_device = { + .name = "isp1761", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_isp1761_resources), + .resource = bfin_isp1761_resources, +}; + +static struct platform_device *bfin_isp1761_devices[] = { + &bfin_isp1761_device, +}; + +int __init bfin_isp1761_init(void) +{ + unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); + + printk(KERN_INFO "%s(): registering device resources\n", __func__); + set_irq_type(bfin_isp1761_resources[1].start, IRQF_TRIGGER_FALLING); + + return platform_add_devices(bfin_isp1761_devices, num_devices); +} + +void __exit bfin_isp1761_exit(void) +{ + platform_device_unregister(&bfin_isp1761_device); +} +arch_initcall(bfin_isp1761_init); +#endif + #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) #include <asm/mach/bf54x-lq043.h> @@ -177,6 +220,7 @@ static struct resource bfin_uart_resources[] = { { .start = 0xFFC03100, .end = 0xFFC031FF, + .flags = IORESOURCE_MEM, }, #endif }; diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index f7191141a3c..06b9178cfcf 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -31,7 +31,7 @@ #include <linux/init.h> #include <asm/blackfin.h> #include <asm/trace.h> -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif @@ -130,7 +130,7 @@ ENTRY(__start) /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bf53x_relocate_l1_mem; -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK call _start_dma_code; #endif /* Code for initializing Async memory banks */ @@ -288,7 +288,7 @@ ENDPROC(_real_start) __FINIT .section .l1.text -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) /* Enable PHY CLK buffer output */ diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index 5b8bd40851d..cf1a2dff01e 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -377,12 +377,6 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.l = LO(EBIU_SDBCTL); - p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */ - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - P2.H = hi(EBIU_SDGCTL); P2.L = lo(EBIU_SDGCTL); R0 = [P2]; diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index caaab49e9cf..f9160d83b91 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -53,9 +53,3 @@ # endif #endif /* CONFIG_BFIN_KERNEL_CLOCK */ - -#ifdef CONFIG_MEM_SIZE -#if (CONFIG_MEM_SIZE % 4) -#error "SDRAM mem size must be multible of 4MB" -#endif -#endif diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S index b7981d31c39..5e3f1d8a4fb 100644 --- a/arch/blackfin/mach-common/dpmc_modes.S +++ b/arch/blackfin/mach-common/dpmc_modes.S @@ -7,7 +7,7 @@ #include <linux/linkage.h> #include <asm/blackfin.h> #include <asm/mach/irq.h> - +#include <asm/dpmc.h> .section .l1.text @@ -51,31 +51,32 @@ ENTRY(_sleep_mode) RETS = [SP++]; ( R7:0, P5:0 ) = [SP++]; RTS; +ENDPROC(_sleep_mode) ENTRY(_hibernate_mode) [--SP] = ( R7:0, P5:0 ); [--SP] = RETS; + R3 = R0; + R0 = IWR_DISABLE_ALL; + R1 = IWR_DISABLE_ALL; + R2 = IWR_DISABLE_ALL; call _set_sic_iwr; + call _set_dram_srfs; + SSYNC; R0 = 0xFFFF (Z); call _set_rtc_istat; P0.H = hi(VR_CTL); P0.L = lo(VR_CTL); - R1 = W[P0](z); - BITSET (R1, 8); - BITCLR (R1, 0); - BITCLR (R1, 1); - W[P0] = R1.L; - SSYNC; + W[P0] = R3.L; CLI R2; IDLE; - - /* Actually, adding anything may not be necessary...SDRAM contents - * are lost - */ +.Lforever: + jump .Lforever; +ENDPROC(_hibernate_mode) ENTRY(_deep_sleep) [--SP] = ( R7:0, P5:0 ); @@ -131,6 +132,7 @@ ENTRY(_deep_sleep) RETS = [SP++]; ( R7:0, P5:0 ) = [SP++]; RTS; +ENDPROC(_deep_sleep) ENTRY(_sleep_deeper) [--SP] = ( R7:0, P5:0 ); @@ -232,53 +234,73 @@ ENTRY(_sleep_deeper) RETS = [SP++]; ( R7:0, P5:0 ) = [SP++]; RTS; +ENDPROC(_sleep_deeper) ENTRY(_set_dram_srfs) /* set the dram to self refresh mode */ -#if defined(CONFIG_BF54x) + SSYNC; +#if defined(EBIU_RSTCTL) /* DDR */ P0.H = hi(EBIU_RSTCTL); P0.L = lo(EBIU_RSTCTL); R2 = [P0]; - R3.H = hi(SRREQ); - R3.L = lo(SRREQ); -#else - P0.H = hi(EBIU_SDGCTL); + BITSET(R2, 3); /* SRREQ enter self-refresh mode */ + [P0] = R2; + SSYNC; +1: + R2 = [P0]; + CC = BITTST(R2, 4); + if !CC JUMP 1b; +#else /* SDRAM */ P0.L = lo(EBIU_SDGCTL); + P0.H = hi(EBIU_SDGCTL); R2 = [P0]; - R3.H = hi(SRFS); - R3.L = lo(SRFS); -#endif - R2 = R2|R3; + BITSET(R2, 24); /* SRFS enter self-refresh mode */ [P0] = R2; - ssync; -#if defined(CONFIG_BF54x) -.LSRR_MODE: + SSYNC; + + P0.L = lo(EBIU_SDSTAT); + P0.H = hi(EBIU_SDSTAT); +1: + R2 = w[P0]; + SSYNC; + cc = BITTST(R2, 1); /* SDSRA poll self-refresh status */ + if !cc jump 1b; + + P0.L = lo(EBIU_SDGCTL); + P0.H = hi(EBIU_SDGCTL); R2 = [P0]; - CC = BITTST(R2, 4); - if !CC JUMP .LSRR_MODE; + BITCLR(R2, 0); /* SCTLE disable CLKOUT */ + [P0] = R2; #endif RTS; +ENDPROC(_set_dram_srfs) ENTRY(_unset_dram_srfs) /* set the dram out of self refresh mode */ -#if defined(CONFIG_BF54x) +#if defined(EBIU_RSTCTL) /* DDR */ P0.H = hi(EBIU_RSTCTL); P0.L = lo(EBIU_RSTCTL); R2 = [P0]; - R3.H = hi(SRREQ); - R3.L = lo(SRREQ); -#else + BITCLR(R2, 3); /* clear SRREQ bit */ + [P0] = R2; +#elif defined(EBIU_SDGCTL) /* SDRAM */ + + P0.L = lo(EBIU_SDGCTL); /* release CLKOUT from self-refresh */ + P0.H = hi(EBIU_SDGCTL); + R2 = [P0]; + BITSET(R2, 0); /* SCTLE enable CLKOUT */ + [P0] = R2 + SSYNC; + + P0.L = lo(EBIU_SDGCTL); /* release SDRAM from self-refresh */ P0.H = hi(EBIU_SDGCTL); - P0.L = lo(EBIU_SDGCTL); R2 = [P0]; - R3.H = hi(SRFS); - R3.L = lo(SRFS); + BITCLR(R2, 24); /* clear SRFS bit */ + [P0] = R2 #endif - R3 = ~R3; - R2 = R2&R3; - [P0] = R2; - ssync; + SSYNC; RTS; +ENDPROC(_unset_dram_srfs) ENTRY(_set_sic_iwr) #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) @@ -300,6 +322,7 @@ ENTRY(_set_sic_iwr) SSYNC; RTS; +ENDPROC(_set_sic_iwr) ENTRY(_set_rtc_istat) #ifndef CONFIG_BF561 @@ -307,8 +330,14 @@ ENTRY(_set_rtc_istat) P0.L = lo(RTC_ISTAT); w[P0] = R0.L; SSYNC; +#elif (ANOMALY_05000371) + nop; + nop; + nop; + nop; #endif RTS; +ENDPROC(_set_rtc_istat) ENTRY(_test_pll_locked) P0.H = hi(PLL_STAT); @@ -318,3 +347,509 @@ ENTRY(_test_pll_locked) CC = BITTST(R0,5); IF !CC JUMP 1b; RTS; +ENDPROC(_test_pll_locked) + +.section .text + +ENTRY(_do_hibernate) + [--SP] = ( R7:0, P5:0 ); + [--SP] = RETS; + /* Save System MMRs */ + R2 = R0; + P0.H = hi(PLL_CTL); + P0.L = lo(PLL_CTL); + +#ifdef SIC_IMASK0 + PM_SYS_PUSH(SIC_IMASK0) +#endif +#ifdef SIC_IMASK1 + PM_SYS_PUSH(SIC_IMASK1) +#endif +#ifdef SIC_IMASK2 + PM_SYS_PUSH(SIC_IMASK2) +#endif +#ifdef SIC_IMASK + PM_SYS_PUSH(SIC_IMASK) +#endif +#ifdef SICA_IMASK0 + PM_SYS_PUSH(SICA_IMASK0) +#endif +#ifdef SICA_IMASK1 + PM_SYS_PUSH(SICA_IMASK1) +#endif +#ifdef SIC_IAR2 + PM_SYS_PUSH(SIC_IAR0) + PM_SYS_PUSH(SIC_IAR1) + PM_SYS_PUSH(SIC_IAR2) +#endif +#ifdef SIC_IAR3 + PM_SYS_PUSH(SIC_IAR3) +#endif +#ifdef SIC_IAR4 + PM_SYS_PUSH(SIC_IAR4) + PM_SYS_PUSH(SIC_IAR5) + PM_SYS_PUSH(SIC_IAR6) +#endif +#ifdef SIC_IAR7 + PM_SYS_PUSH(SIC_IAR7) +#endif +#ifdef SIC_IAR8 + PM_SYS_PUSH(SIC_IAR8) + PM_SYS_PUSH(SIC_IAR9) + PM_SYS_PUSH(SIC_IAR10) + PM_SYS_PUSH(SIC_IAR11) +#endif + +#ifdef SICA_IAR0 + PM_SYS_PUSH(SICA_IAR0) + PM_SYS_PUSH(SICA_IAR1) + PM_SYS_PUSH(SICA_IAR2) + PM_SYS_PUSH(SICA_IAR3) + PM_SYS_PUSH(SICA_IAR4) + PM_SYS_PUSH(SICA_IAR5) + PM_SYS_PUSH(SICA_IAR6) + PM_SYS_PUSH(SICA_IAR7) +#endif + +#ifdef SIC_IWR + PM_SYS_PUSH(SIC_IWR) +#endif +#ifdef SIC_IWR0 + PM_SYS_PUSH(SIC_IWR0) +#endif +#ifdef SIC_IWR1 + PM_SYS_PUSH(SIC_IWR1) +#endif +#ifdef SIC_IWR2 + PM_SYS_PUSH(SIC_IWR2) +#endif +#ifdef SICA_IWR0 + PM_SYS_PUSH(SICA_IWR0) +#endif +#ifdef SICA_IWR1 + PM_SYS_PUSH(SICA_IWR1) +#endif + +#ifdef PINT0_ASSIGN + PM_SYS_PUSH(PINT0_ASSIGN) + PM_SYS_PUSH(PINT1_ASSIGN) + PM_SYS_PUSH(PINT2_ASSIGN) + PM_SYS_PUSH(PINT3_ASSIGN) +#endif + + PM_SYS_PUSH(EBIU_AMBCTL0) + PM_SYS_PUSH(EBIU_AMBCTL1) + PM_SYS_PUSH16(EBIU_AMGCTL) + +#ifdef EBIU_FCTL + PM_SYS_PUSH(EBIU_MBSCTL) + PM_SYS_PUSH(EBIU_MODE) + PM_SYS_PUSH(EBIU_FCTL) +#endif + + PM_SYS_PUSH16(SYSCR) + + /* Save Core MMRs */ + P0.H = hi(SRAM_BASE_ADDRESS); + P0.L = lo(SRAM_BASE_ADDRESS); + + PM_PUSH(DMEM_CONTROL) + PM_PUSH(DCPLB_ADDR0) + PM_PUSH(DCPLB_ADDR1) + PM_PUSH(DCPLB_ADDR2) + PM_PUSH(DCPLB_ADDR3) + PM_PUSH(DCPLB_ADDR4) + PM_PUSH(DCPLB_ADDR5) + PM_PUSH(DCPLB_ADDR6) + PM_PUSH(DCPLB_ADDR7) + PM_PUSH(DCPLB_ADDR8) + PM_PUSH(DCPLB_ADDR9) + PM_PUSH(DCPLB_ADDR10) + PM_PUSH(DCPLB_ADDR11) + PM_PUSH(DCPLB_ADDR12) + PM_PUSH(DCPLB_ADDR13) + PM_PUSH(DCPLB_ADDR14) + PM_PUSH(DCPLB_ADDR15) + PM_PUSH(DCPLB_DATA0) + PM_PUSH(DCPLB_DATA1) + PM_PUSH(DCPLB_DATA2) + PM_PUSH(DCPLB_DATA3) + PM_PUSH(DCPLB_DATA4) + PM_PUSH(DCPLB_DATA5) + PM_PUSH(DCPLB_DATA6) + PM_PUSH(DCPLB_DATA7) + PM_PUSH(DCPLB_DATA8) + PM_PUSH(DCPLB_DATA9) + PM_PUSH(DCPLB_DATA10) + PM_PUSH(DCPLB_DATA11) + PM_PUSH(DCPLB_DATA12) + PM_PUSH(DCPLB_DATA13) + PM_PUSH(DCPLB_DATA14) + PM_PUSH(DCPLB_DATA15) + PM_PUSH(IMEM_CONTROL) + PM_PUSH(ICPLB_ADDR0) + PM_PUSH(ICPLB_ADDR1) + PM_PUSH(ICPLB_ADDR2) + PM_PUSH(ICPLB_ADDR3) + PM_PUSH(ICPLB_ADDR4) + PM_PUSH(ICPLB_ADDR5) + PM_PUSH(ICPLB_ADDR6) + PM_PUSH(ICPLB_ADDR7) + PM_PUSH(ICPLB_ADDR8) + PM_PUSH(ICPLB_ADDR9) + PM_PUSH(ICPLB_ADDR10) + PM_PUSH(ICPLB_ADDR11) + PM_PUSH(ICPLB_ADDR12) + PM_PUSH(ICPLB_ADDR13) + PM_PUSH(ICPLB_ADDR14) + PM_PUSH(ICPLB_ADDR15) + PM_PUSH(ICPLB_DATA0) + PM_PUSH(ICPLB_DATA1) + PM_PUSH(ICPLB_DATA2) + PM_PUSH(ICPLB_DATA3) + PM_PUSH(ICPLB_DATA4) + PM_PUSH(ICPLB_DATA5) + PM_PUSH(ICPLB_DATA6) + PM_PUSH(ICPLB_DATA7) + PM_PUSH(ICPLB_DATA8) + PM_PUSH(ICPLB_DATA9) + PM_PUSH(ICPLB_DATA10) + PM_PUSH(ICPLB_DATA11) + PM_PUSH(ICPLB_DATA12) + PM_PUSH(ICPLB_DATA13) + PM_PUSH(ICPLB_DATA14) + PM_PUSH(ICPLB_DATA15) + PM_PUSH(EVT0) + PM_PUSH(EVT1) + PM_PUSH(EVT2) + PM_PUSH(EVT3) + PM_PUSH(EVT4) + PM_PUSH(EVT5) + PM_PUSH(EVT6) + PM_PUSH(EVT7) + PM_PUSH(EVT8) + PM_PUSH(EVT9) + PM_PUSH(EVT10) + PM_PUSH(EVT11) + PM_PUSH(EVT12) + PM_PUSH(EVT13) + PM_PUSH(EVT14) + PM_PUSH(EVT15) + PM_PUSH(IMASK) + PM_PUSH(ILAT) + PM_PUSH(IPRIO) + PM_PUSH(TCNTL) + PM_PUSH(TPERIOD) + PM_PUSH(TSCALE) + PM_PUSH(TCOUNT) + PM_PUSH(TBUFCTL) + + /* Save Core Registers */ + [--sp] = SYSCFG; + [--sp] = ( R7:0, P5:0 ); + [--sp] = fp; + [--sp] = usp; + + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + [--sp] = ASTAT; + [--sp] = CYCLES; + [--sp] = CYCLES2; + + [--sp] = RETS; + r0 = RETI; + [--sp] = r0; + [--sp] = RETX; + [--sp] = RETN; + [--sp] = RETE; + [--sp] = SEQSTAT; + + /* Save Magic, return address and Stack Pointer */ + P0.H = 0; + P0.L = 0; + R0.H = 0xDEAD; /* Hibernate Magic */ + R0.L = 0xBEEF; + [P0++] = R0; /* Store Hibernate Magic */ + R0.H = .Lpm_resume_here; + R0.L = .Lpm_resume_here; + [P0++] = R0; /* Save Return Address */ + [P0++] = SP; /* Save Stack Pointer */ + P0.H = _hibernate_mode; + P0.L = _hibernate_mode; + R0 = R2; + call (P0); /* Goodbye */ + +.Lpm_resume_here: + + /* Restore Core Registers */ + SEQSTAT = [sp++]; + RETE = [sp++]; + RETN = [sp++]; + RETX = [sp++]; + r0 = [sp++]; + RETI = r0; + RETS = [sp++]; + + CYCLES2 = [sp++]; + CYCLES = [sp++]; + ASTAT = [sp++]; + + LB1 = [sp++]; + LB0 = [sp++]; + LT1 = [sp++]; + LT0 = [sp++]; + LC1 = [sp++]; + LC0 = [sp++]; + + a1.w = [sp++]; + a1.x = [sp++]; + a0.w = [sp++]; + a0.x = [sp++]; + b3 = [sp++]; + b2 = [sp++]; + b1 = [sp++]; + b0 = [sp++]; + + l3 = [sp++]; + l2 = [sp++]; + l1 = [sp++]; + l0 = [sp++]; + + m3 = [sp++]; + m2 = [sp++]; + m1 = [sp++]; + m0 = [sp++]; + + i3 = [sp++]; + i2 = [sp++]; + i1 = [sp++]; + i0 = [sp++]; + + usp = [sp++]; + fp = [sp++]; + + ( R7 : 0, P5 : 0) = [ SP ++ ]; + SYSCFG = [sp++]; + + /* Restore Core MMRs */ + + PM_POP(TBUFCTL) + PM_POP(TCOUNT) + PM_POP(TSCALE) + PM_POP(TPERIOD) + PM_POP(TCNTL) + PM_POP(IPRIO) + PM_POP(ILAT) + PM_POP(IMASK) + PM_POP(EVT15) + PM_POP(EVT14) + PM_POP(EVT13) + PM_POP(EVT12) + PM_POP(EVT11) + PM_POP(EVT10) + PM_POP(EVT9) + PM_POP(EVT8) + PM_POP(EVT7) + PM_POP(EVT6) + PM_POP(EVT5) + PM_POP(EVT4) + PM_POP(EVT3) + PM_POP(EVT2) + PM_POP(EVT1) + PM_POP(EVT0) + PM_POP(ICPLB_DATA15) + PM_POP(ICPLB_DATA14) + PM_POP(ICPLB_DATA13) + PM_POP(ICPLB_DATA12) + PM_POP(ICPLB_DATA11) + PM_POP(ICPLB_DATA10) + PM_POP(ICPLB_DATA9) + PM_POP(ICPLB_DATA8) + PM_POP(ICPLB_DATA7) + PM_POP(ICPLB_DATA6) + PM_POP(ICPLB_DATA5) + PM_POP(ICPLB_DATA4) + PM_POP(ICPLB_DATA3) + PM_POP(ICPLB_DATA2) + PM_POP(ICPLB_DATA1) + PM_POP(ICPLB_DATA0) + PM_POP(ICPLB_ADDR15) + PM_POP(ICPLB_ADDR14) + PM_POP(ICPLB_ADDR13) + PM_POP(ICPLB_ADDR12) + PM_POP(ICPLB_ADDR11) + PM_POP(ICPLB_ADDR10) + PM_POP(ICPLB_ADDR9) + PM_POP(ICPLB_ADDR8) + PM_POP(ICPLB_ADDR7) + PM_POP(ICPLB_ADDR6) + PM_POP(ICPLB_ADDR5) + PM_POP(ICPLB_ADDR4) + PM_POP(ICPLB_ADDR3) + PM_POP(ICPLB_ADDR2) + PM_POP(ICPLB_ADDR1) + PM_POP(ICPLB_ADDR0) + PM_POP(IMEM_CONTROL) + PM_POP(DCPLB_DATA15) + PM_POP(DCPLB_DATA14) + PM_POP(DCPLB_DATA13) + PM_POP(DCPLB_DATA12) + PM_POP(DCPLB_DATA11) + PM_POP(DCPLB_DATA10) + PM_POP(DCPLB_DATA9) + PM_POP(DCPLB_DATA8) + PM_POP(DCPLB_DATA7) + PM_POP(DCPLB_DATA6) + PM_POP(DCPLB_DATA5) + PM_POP(DCPLB_DATA4) + PM_POP(DCPLB_DATA3) + PM_POP(DCPLB_DATA2) + PM_POP(DCPLB_DATA1) + PM_POP(DCPLB_DATA0) + PM_POP(DCPLB_ADDR15) + PM_POP(DCPLB_ADDR14) + PM_POP(DCPLB_ADDR13) + PM_POP(DCPLB_ADDR12) + PM_POP(DCPLB_ADDR11) + PM_POP(DCPLB_ADDR10) + PM_POP(DCPLB_ADDR9) + PM_POP(DCPLB_ADDR8) + PM_POP(DCPLB_ADDR7) + PM_POP(DCPLB_ADDR6) + PM_POP(DCPLB_ADDR5) + PM_POP(DCPLB_ADDR4) + PM_POP(DCPLB_ADDR3) + PM_POP(DCPLB_ADDR2) + PM_POP(DCPLB_ADDR1) + PM_POP(DCPLB_ADDR0) + PM_POP(DMEM_CONTROL) + + /* Restore System MMRs */ + + P0.H = hi(PLL_CTL); + P0.L = lo(PLL_CTL); + PM_SYS_POP16(SYSCR) + +#ifdef EBIU_FCTL + PM_SYS_POP(EBIU_FCTL) + PM_SYS_POP(EBIU_MODE) + PM_SYS_POP(EBIU_MBSCTL) +#endif + PM_SYS_POP16(EBIU_AMGCTL) + PM_SYS_POP(EBIU_AMBCTL1) + PM_SYS_POP(EBIU_AMBCTL0) + +#ifdef PINT0_ASSIGN + PM_SYS_POP(PINT3_ASSIGN) + PM_SYS_POP(PINT2_ASSIGN) + PM_SYS_POP(PINT1_ASSIGN) + PM_SYS_POP(PINT0_ASSIGN) +#endif + +#ifdef SICA_IWR1 + PM_SYS_POP(SICA_IWR1) +#endif +#ifdef SICA_IWR0 + PM_SYS_POP(SICA_IWR0) +#endif +#ifdef SIC_IWR2 + PM_SYS_POP(SIC_IWR2) +#endif +#ifdef SIC_IWR1 + PM_SYS_POP(SIC_IWR1) +#endif +#ifdef SIC_IWR0 + PM_SYS_POP(SIC_IWR0) +#endif +#ifdef SIC_IWR + PM_SYS_POP(SIC_IWR) +#endif + +#ifdef SICA_IAR0 + PM_SYS_POP(SICA_IAR7) + PM_SYS_POP(SICA_IAR6) + PM_SYS_POP(SICA_IAR5) + PM_SYS_POP(SICA_IAR4) + PM_SYS_POP(SICA_IAR3) + PM_SYS_POP(SICA_IAR2) + PM_SYS_POP(SICA_IAR1) + PM_SYS_POP(SICA_IAR0) +#endif + +#ifdef SIC_IAR8 + PM_SYS_POP(SIC_IAR11) + PM_SYS_POP(SIC_IAR10) + PM_SYS_POP(SIC_IAR9) + PM_SYS_POP(SIC_IAR8) +#endif +#ifdef SIC_IAR7 + PM_SYS_POP(SIC_IAR7) +#endif +#ifdef SIC_IAR6 + PM_SYS_POP(SIC_IAR6) + PM_SYS_POP(SIC_IAR5) + PM_SYS_POP(SIC_IAR4) +#endif +#ifdef SIC_IAR3 + PM_SYS_POP(SIC_IAR3) +#endif +#ifdef SIC_IAR2 + PM_SYS_POP(SIC_IAR2) + PM_SYS_POP(SIC_IAR1) + PM_SYS_POP(SIC_IAR0) +#endif +#ifdef SICA_IMASK1 + PM_SYS_POP(SICA_IMASK1) +#endif +#ifdef SICA_IMASK0 + PM_SYS_POP(SICA_IMASK0) +#endif +#ifdef SIC_IMASK + PM_SYS_POP(SIC_IMASK) +#endif +#ifdef SIC_IMASK2 + PM_SYS_POP(SIC_IMASK2) +#endif +#ifdef SIC_IMASK1 + PM_SYS_POP(SIC_IMASK1) +#endif +#ifdef SIC_IMASK0 + PM_SYS_POP(SIC_IMASK0) +#endif + + [--sp] = RETI; /* Clear Global Interrupt Disable */ + SP += 4; + + RETS = [SP++]; + ( R7:0, P5:0 ) = [SP++]; + RTS; +ENDPROC(_do_hibernate) diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 038f70e0be6..eceb484d90f 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -158,23 +158,45 @@ ENTRY(_ex_single_step) cc = r7 == r6; if cc jump _bfin_return_from_exception; + /* Don't do single step in hardware exception handler */ + p5.l = lo(IPEND); + p5.h = hi(IPEND); + r6 = [p5]; + cc = bittst(r6, 5); + if cc jump _bfin_return_from_exception; + +#ifdef CONFIG_KGDB + /* skip single step if current interrupt priority is higher than + * that of the first instruction, from which gdb starts single step */ + r6 >>= 6; + r7 = 10; +.Lfind_priority_start: + cc = bittst(r6, 0); + if cc jump .Lfind_priority_done; + r6 >>= 1; + r7 += -1; + cc = r7 == 0; + if cc jump .Lfind_priority_done; + jump.s .Lfind_priority_start; +.Lfind_priority_done: + p4.l = _debugger_step; + p4.h = _debugger_step; + r6 = [p4]; + cc = r6 == 0; + if cc jump .Ldo_single_step; + r6 += -1; + cc = r6 < r7; + if cc jump _bfin_return_from_exception; +.Ldo_single_step: +#endif + /* If we were in user mode, do the single step normally. */ - p5.l = lo(IPEND); - p5.h = hi(IPEND); r6 = [p5]; r7 = 0xffe0 (z); r7 = r7 & r6; cc = r7 == 0; - if !cc jump 1f; - - /* Single stepping only a single instruction, so clear the trace - * bit here. */ - r7 = syscfg; - bitclr (r7, 0); - syscfg = R7; - jump _ex_trap_c; + if cc jump 1f; -1: /* * We were in an interrupt handler. By convention, all of them save * SYSCFG with their first instruction, so by checking whether our @@ -202,11 +224,15 @@ ENTRY(_ex_single_step) cc = R7 == R6; if !cc jump _bfin_return_from_exception; +1: + /* Single stepping only a single instruction, so clear the trace + * bit here. */ r7 = syscfg; bitclr (r7, 0); syscfg = R7; - /* Fall through to _bfin_return_from_exception. */ + jump _ex_trap_c; + ENDPROC(_ex_single_step) ENTRY(_bfin_return_from_exception) diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index f5fd768022e..64d746114e4 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -459,6 +459,8 @@ static struct irq_chip bfin_gpio_irqchip = { .mask = bfin_gpio_mask_irq, .mask_ack = bfin_gpio_mask_ack_irq, .unmask = bfin_gpio_unmask_irq, + .disable = bfin_gpio_mask_irq, + .enable = bfin_gpio_unmask_irq, .set_type = bfin_gpio_irq_type, .startup = bfin_gpio_irq_startup, .shutdown = bfin_gpio_irq_shutdown, @@ -846,6 +848,8 @@ static struct irq_chip bfin_gpio_irqchip = { .mask = bfin_gpio_mask_irq, .mask_ack = bfin_gpio_mask_ack_irq, .unmask = bfin_gpio_unmask_irq, + .disable = bfin_gpio_mask_irq, + .enable = bfin_gpio_unmask_irq, .set_type = bfin_gpio_irq_type, .startup = bfin_gpio_irq_startup, .shutdown = bfin_gpio_irq_shutdown, diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index 0be805ca423..4fe6a2366b1 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -38,8 +38,9 @@ #include <linux/io.h> #include <linux/irq.h> -#include <asm/dpmc.h> #include <asm/gpio.h> +#include <asm/dma.h> +#include <asm/dpmc.h> #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H #define WAKEUP_TYPE PM_WAKE_HIGH @@ -61,16 +62,17 @@ #define WAKEUP_TYPE PM_WAKE_BOTH_EDGES #endif + void bfin_pm_suspend_standby_enter(void) { + unsigned long flags; + #ifdef CONFIG_PM_WAKEUP_BY_GPIO gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE); #endif - u32 flags; - local_irq_save(flags); - bfin_pm_setup(); + bfin_pm_standby_setup(); #ifdef CONFIG_PM_BFIN_SLEEP_DEEPER sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]); @@ -78,7 +80,7 @@ void bfin_pm_suspend_standby_enter(void) sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]); #endif - bfin_pm_restore(); + bfin_pm_standby_restore(); #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) bfin_write_SIC_IWR0(IWR_ENABLE_ALL); @@ -93,6 +95,195 @@ void bfin_pm_suspend_standby_enter(void) local_irq_restore(flags); } +int bf53x_suspend_l1_mem(unsigned char *memptr) +{ + dma_memcpy(memptr, (const void *) L1_CODE_START, L1_CODE_LENGTH); + dma_memcpy(memptr + L1_CODE_LENGTH, (const void *) L1_DATA_A_START, + L1_DATA_A_LENGTH); + dma_memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH, + (const void *) L1_DATA_B_START, L1_DATA_B_LENGTH); + memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH + + L1_DATA_B_LENGTH, (const void *) L1_SCRATCH_START, + L1_SCRATCH_LENGTH); + + return 0; +} + +int bf53x_resume_l1_mem(unsigned char *memptr) +{ + dma_memcpy((void *) L1_CODE_START, memptr, L1_CODE_LENGTH); + dma_memcpy((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH, + L1_DATA_A_LENGTH); + dma_memcpy((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH + + L1_DATA_A_LENGTH, L1_DATA_B_LENGTH); + memcpy((void *) L1_SCRATCH_START, memptr + L1_CODE_LENGTH + + L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, L1_SCRATCH_LENGTH); + + return 0; +} + +#ifdef CONFIG_BFIN_WB +static void flushinv_all_dcache(void) +{ + u32 way, bank, subbank, set; + u32 status, addr; + u32 dmem_ctl = bfin_read_DMEM_CONTROL(); + + for (bank = 0; bank < 2; ++bank) { + if (!(dmem_ctl & (1 << (DMC1_P - bank)))) + continue; + + for (way = 0; way < 2; ++way) + for (subbank = 0; subbank < 4; ++subbank) + for (set = 0; set < 64; ++set) { + + bfin_write_DTEST_COMMAND( + way << 26 | + bank << 23 | + subbank << 16 | + set << 5 + ); + CSYNC(); + status = bfin_read_DTEST_DATA0(); + + /* only worry about valid/dirty entries */ + if ((status & 0x3) != 0x3) + continue; + + /* construct the address using the tag */ + addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5); + + /* flush it */ + __asm__ __volatile__("FLUSHINV[%0];" : : "a"(addr)); + } + } +} +#endif + +static inline void dcache_disable(void) +{ +#ifdef CONFIG_BFIN_DCACHE + unsigned long ctrl; + +#ifdef CONFIG_BFIN_WB + flushinv_all_dcache(); +#endif + SSYNC(); + ctrl = bfin_read_DMEM_CONTROL(); + ctrl &= ~ENDCPLB; + bfin_write_DMEM_CONTROL(ctrl); + SSYNC(); +#endif +} + +static inline void dcache_enable(void) +{ +#ifdef CONFIG_BFIN_DCACHE + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_DMEM_CONTROL(); + ctrl |= ENDCPLB; + bfin_write_DMEM_CONTROL(ctrl); + SSYNC(); +#endif +} + +static inline void icache_disable(void) +{ +#ifdef CONFIG_BFIN_ICACHE + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_IMEM_CONTROL(); + ctrl &= ~ENICPLB; + bfin_write_IMEM_CONTROL(ctrl); + SSYNC(); +#endif +} + +static inline void icache_enable(void) +{ +#ifdef CONFIG_BFIN_ICACHE + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_IMEM_CONTROL(); + ctrl |= ENICPLB; + bfin_write_IMEM_CONTROL(ctrl); + SSYNC(); +#endif +} + +int bfin_pm_suspend_mem_enter(void) +{ + unsigned long flags; + int wakeup, ret; + + unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH + + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH, + GFP_KERNEL); + + if (memptr == NULL) { + panic("bf53x_suspend_l1_mem malloc failed"); + return -ENOMEM; + } + + wakeup = bfin_read_VR_CTL() & ~FREQ; + wakeup |= SCKELOW; + + /* FIXME: merge this somehow with set_irq_wake */ +#ifdef CONFIG_PM_BFIN_WAKE_RTC + wakeup |= WAKE; +#endif +#ifdef CONFIG_PM_BFIN_WAKE_PH6 + wakeup |= PHYWE; +#endif +#ifdef CONFIG_PM_BFIN_WAKE_CAN + wakeup |= CANWE; +#endif +#ifdef CONFIG_PM_BFIN_WAKE_GP + wakeup |= GPWE; +#endif +#ifdef CONFIG_PM_BFIN_WAKE_USB + wakeup |= USBWE; +#endif +#ifdef CONFIG_PM_BFIN_WAKE_KEYPAD + wakeup |= KPADWE; +#endif +#ifdef CONFIG_PM_BFIN_WAKE_ROTARY + wakeup |= ROTWE; +#endif + + local_irq_save(flags); + + ret = blackfin_dma_suspend(); + + if (ret) { + local_irq_restore(flags); + kfree(memptr); + return ret; + } + + bfin_gpio_pm_hibernate_suspend(); + + dcache_disable(); + icache_disable(); + bf53x_suspend_l1_mem(memptr); + + do_hibernate(wakeup); /* Goodbye */ + + bf53x_resume_l1_mem(memptr); + + icache_enable(); + dcache_enable(); + + bfin_gpio_pm_hibernate_restore(); + blackfin_dma_resume(); + + local_irq_restore(flags); + kfree(memptr); + + return 0; +} + /* * bfin_pm_valid - Tell the PM core that we only support the standby sleep * state @@ -101,7 +292,24 @@ void bfin_pm_suspend_standby_enter(void) */ static int bfin_pm_valid(suspend_state_t state) { - return (state == PM_SUSPEND_STANDBY); + return (state == PM_SUSPEND_STANDBY +#ifndef BF533_FAMILY + /* + * On BF533/2/1: + * If we enter Hibernate the SCKE Pin is driven Low, + * so that the SDRAM enters Self Refresh Mode. + * However when the reset sequence that follows hibernate + * state is executed, SCKE is driven High, taking the + * SDRAM out of Self Refresh. + * + * If you reconfigure and access the SDRAM "very quickly", + * you are likely to avoid errors, otherwise the SDRAM + * start losing its contents. + * An external HW workaround is possible using logic gates. + */ + || state == PM_SUSPEND_MEM +#endif + ); } /* @@ -115,10 +323,9 @@ static int bfin_pm_enter(suspend_state_t state) case PM_SUSPEND_STANDBY: bfin_pm_suspend_standby_enter(); break; - case PM_SUSPEND_MEM: - return -ENOTSUPP; - + bfin_pm_suspend_mem_enter(); + break; default: return -EINVAL; } diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c index 3246f91c7ba..5af3c31c936 100644 --- a/arch/blackfin/mm/blackfin_sram.c +++ b/arch/blackfin/mm/blackfin_sram.c @@ -41,215 +41,309 @@ #include <asm/blackfin.h> #include "blackfin_sram.h" -spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock; - -#if CONFIG_L1_MAX_PIECE < 16 -#undef CONFIG_L1_MAX_PIECE -#define CONFIG_L1_MAX_PIECE 16 -#endif - -#if CONFIG_L1_MAX_PIECE > 1024 -#undef CONFIG_L1_MAX_PIECE -#define CONFIG_L1_MAX_PIECE 1024 -#endif - -#define SRAM_SLT_NULL 0 -#define SRAM_SLT_FREE 1 -#define SRAM_SLT_ALLOCATED 2 +static spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock; +static spinlock_t l2_sram_lock; /* the data structure for L1 scratchpad and DATA SRAM */ -struct l1_sram_piece { +struct sram_piece { void *paddr; int size; - int flag; pid_t pid; + struct sram_piece *next; }; -static struct l1_sram_piece l1_ssram[CONFIG_L1_MAX_PIECE]; +static struct sram_piece free_l1_ssram_head, used_l1_ssram_head; #if L1_DATA_A_LENGTH != 0 -static struct l1_sram_piece l1_data_A_sram[CONFIG_L1_MAX_PIECE]; +static struct sram_piece free_l1_data_A_sram_head, used_l1_data_A_sram_head; #endif #if L1_DATA_B_LENGTH != 0 -static struct l1_sram_piece l1_data_B_sram[CONFIG_L1_MAX_PIECE]; +static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head; #endif #if L1_CODE_LENGTH != 0 -static struct l1_sram_piece l1_inst_sram[CONFIG_L1_MAX_PIECE]; +static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head; +#endif + +#ifdef L2_LENGTH +static struct sram_piece free_l2_sram_head, used_l2_sram_head; #endif +static struct kmem_cache *sram_piece_cache; + /* L1 Scratchpad SRAM initialization function */ -void __init l1sram_init(void) +static void __init l1sram_init(void) { - printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n", - L1_SCRATCH_LENGTH >> 10); + free_l1_ssram_head.next = + kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); + if (!free_l1_ssram_head.next) { + printk(KERN_INFO"Fail to initialize Scratchpad data SRAM.\n"); + return; + } + + free_l1_ssram_head.next->paddr = (void *)L1_SCRATCH_START; + free_l1_ssram_head.next->size = L1_SCRATCH_LENGTH; + free_l1_ssram_head.next->pid = 0; + free_l1_ssram_head.next->next = NULL; - memset(&l1_ssram, 0x00, sizeof(l1_ssram)); - l1_ssram[0].paddr = (void *)L1_SCRATCH_START; - l1_ssram[0].size = L1_SCRATCH_LENGTH; - l1_ssram[0].flag = SRAM_SLT_FREE; + used_l1_ssram_head.next = NULL; /* mutex initialize */ spin_lock_init(&l1sram_lock); + + printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n", + L1_SCRATCH_LENGTH >> 10); } -void __init l1_data_sram_init(void) +static void __init l1_data_sram_init(void) { #if L1_DATA_A_LENGTH != 0 - memset(&l1_data_A_sram, 0x00, sizeof(l1_data_A_sram)); - l1_data_A_sram[0].paddr = (void *)L1_DATA_A_START + - (_ebss_l1 - _sdata_l1); - l1_data_A_sram[0].size = L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1); - l1_data_A_sram[0].flag = SRAM_SLT_FREE; - - printk(KERN_INFO "Blackfin Data A SRAM: %d KB (%d KB free)\n", - L1_DATA_A_LENGTH >> 10, l1_data_A_sram[0].size >> 10); + free_l1_data_A_sram_head.next = + kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); + if (!free_l1_data_A_sram_head.next) { + printk(KERN_INFO"Fail to initialize L1 Data A SRAM.\n"); + return; + } + + free_l1_data_A_sram_head.next->paddr = + (void *)L1_DATA_A_START + (_ebss_l1 - _sdata_l1); + free_l1_data_A_sram_head.next->size = + L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1); + free_l1_data_A_sram_head.next->pid = 0; + free_l1_data_A_sram_head.next->next = NULL; + + used_l1_data_A_sram_head.next = NULL; + + printk(KERN_INFO "Blackfin L1 Data A SRAM: %d KB (%d KB free)\n", + L1_DATA_A_LENGTH >> 10, + free_l1_data_A_sram_head.next->size >> 10); #endif #if L1_DATA_B_LENGTH != 0 - memset(&l1_data_B_sram, 0x00, sizeof(l1_data_B_sram)); - l1_data_B_sram[0].paddr = (void *)L1_DATA_B_START + - (_ebss_b_l1 - _sdata_b_l1); - l1_data_B_sram[0].size = L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1); - l1_data_B_sram[0].flag = SRAM_SLT_FREE; - - printk(KERN_INFO "Blackfin Data B SRAM: %d KB (%d KB free)\n", - L1_DATA_B_LENGTH >> 10, l1_data_B_sram[0].size >> 10); + free_l1_data_B_sram_head.next = + kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); + if (!free_l1_data_B_sram_head.next) { + printk(KERN_INFO"Fail to initialize L1 Data B SRAM.\n"); + return; + } + + free_l1_data_B_sram_head.next->paddr = + (void *)L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1); + free_l1_data_B_sram_head.next->size = + L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1); + free_l1_data_B_sram_head.next->pid = 0; + free_l1_data_B_sram_head.next->next = NULL; + + used_l1_data_B_sram_head.next = NULL; + + printk(KERN_INFO "Blackfin L1 Data B SRAM: %d KB (%d KB free)\n", + L1_DATA_B_LENGTH >> 10, + free_l1_data_B_sram_head.next->size >> 10); #endif /* mutex initialize */ spin_lock_init(&l1_data_sram_lock); } -void __init l1_inst_sram_init(void) +static void __init l1_inst_sram_init(void) { #if L1_CODE_LENGTH != 0 - memset(&l1_inst_sram, 0x00, sizeof(l1_inst_sram)); - l1_inst_sram[0].paddr = (void *)L1_CODE_START + (_etext_l1 - _stext_l1); - l1_inst_sram[0].size = L1_CODE_LENGTH - (_etext_l1 - _stext_l1); - l1_inst_sram[0].flag = SRAM_SLT_FREE; + free_l1_inst_sram_head.next = + kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); + if (!free_l1_inst_sram_head.next) { + printk(KERN_INFO"Fail to initialize L1 Instruction SRAM.\n"); + return; + } - printk(KERN_INFO "Blackfin Instruction SRAM: %d KB (%d KB free)\n", - L1_CODE_LENGTH >> 10, l1_inst_sram[0].size >> 10); + free_l1_inst_sram_head.next->paddr = + (void *)L1_CODE_START + (_etext_l1 - _stext_l1); + free_l1_inst_sram_head.next->size = + L1_CODE_LENGTH - (_etext_l1 - _stext_l1); + free_l1_inst_sram_head.next->pid = 0; + free_l1_inst_sram_head.next->next = NULL; + + used_l1_inst_sram_head.next = NULL; + + printk(KERN_INFO "Blackfin L1 Instruction SRAM: %d KB (%d KB free)\n", + L1_CODE_LENGTH >> 10, + free_l1_inst_sram_head.next->size >> 10); #endif /* mutex initialize */ spin_lock_init(&l1_inst_sram_lock); } -/* L1 memory allocate function */ -static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count) +static void __init l2_sram_init(void) { - int i, index = 0; - void *addr = NULL; +#ifdef L2_LENGTH + free_l2_sram_head.next = + kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); + if (!free_l2_sram_head.next) { + printk(KERN_INFO"Fail to initialize L2 SRAM.\n"); + return; + } - if (size <= 0) + free_l2_sram_head.next->paddr = (void *)L2_START + + (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2); + free_l2_sram_head.next->size = L2_LENGTH - + (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2); + free_l2_sram_head.next->pid = 0; + free_l2_sram_head.next->next = NULL; + + used_l2_sram_head.next = NULL; + + printk(KERN_INFO "Blackfin L2 SRAM: %d KB (%d KB free)\n", + L2_LENGTH >> 10, + free_l2_sram_head.next->size >> 10); +#endif + + /* mutex initialize */ + spin_lock_init(&l2_sram_lock); +} +void __init bfin_sram_init(void) +{ + sram_piece_cache = kmem_cache_create("sram_piece_cache", + sizeof(struct sram_piece), + 0, SLAB_PANIC, NULL); + + l1sram_init(); + l1_data_sram_init(); + l1_inst_sram_init(); + l2_sram_init(); +} + +/* SRAM allocate function */ +static void *_sram_alloc(size_t size, struct sram_piece *pfree_head, + struct sram_piece *pused_head) +{ + struct sram_piece *pslot, *plast, *pavail; + + if (size <= 0 || !pfree_head || !pused_head) return NULL; /* Align the size */ size = (size + 3) & ~3; - /* not use the good method to match the best slot !!! */ - /* search an available memory slot */ - for (i = 0; i < count; i++) { - if ((pfree[i].flag == SRAM_SLT_FREE) - && (pfree[i].size >= size)) { - addr = pfree[i].paddr; - pfree[i].flag = SRAM_SLT_ALLOCATED; - pfree[i].pid = current->pid; - index = i; - break; - } + pslot = pfree_head->next; + plast = pfree_head; + + /* search an available piece slot */ + while (pslot != NULL && size > pslot->size) { + plast = pslot; + pslot = pslot->next; } - if (i >= count) + + if (!pslot) return NULL; - /* updated the NULL memory slot !!! */ - if (pfree[i].size > size) { - for (i = 0; i < count; i++) { - if (pfree[i].flag == SRAM_SLT_NULL) { - pfree[i].pid = 0; - pfree[i].flag = SRAM_SLT_FREE; - pfree[i].paddr = addr + size; - pfree[i].size = pfree[index].size - size; - pfree[index].size = size; - break; - } - } + if (pslot->size == size) { + plast->next = pslot->next; + pavail = pslot; + } else { + pavail = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); + + if (!pavail) + return NULL; + + pavail->paddr = pslot->paddr; + pavail->size = size; + pslot->paddr += size; + pslot->size -= size; } - return addr; + pavail->pid = current->pid; + + pslot = pused_head->next; + plast = pused_head; + + /* insert new piece into used piece list !!! */ + while (pslot != NULL && pavail->paddr < pslot->paddr) { + plast = pslot; + pslot = pslot->next; + } + + pavail->next = pslot; + plast->next = pavail; + + return pavail->paddr; } /* Allocate the largest available block. */ -static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count, +static void *_sram_alloc_max(struct sram_piece *pfree_head, + struct sram_piece *pused_head, unsigned long *psize) { - unsigned long best = 0; - int i, index = -1; - void *addr = NULL; + struct sram_piece *pslot, *pmax; - /* search an available memory slot */ - for (i = 0; i < count; i++) { - if (pfree[i].flag == SRAM_SLT_FREE && pfree[i].size > best) { - addr = pfree[i].paddr; - index = i; - best = pfree[i].size; - } + if (!pfree_head || !pused_head) + return NULL; + + pmax = pslot = pfree_head->next; + + /* search an available piece slot */ + while (pslot != NULL) { + if (pslot->size > pmax->size) + pmax = pslot; + pslot = pslot->next; } - if (index < 0) + + if (!pmax) return NULL; - *psize = best; - pfree[index].pid = current->pid; - pfree[index].flag = SRAM_SLT_ALLOCATED; - return addr; + *psize = pmax->size; + + return _sram_alloc(*psize, pfree_head, pused_head); } -/* L1 memory free function */ -static int _l1_sram_free(const void *addr, - struct l1_sram_piece *pfree, - int count) +/* SRAM free function */ +static int _sram_free(const void *addr, + struct sram_piece *pfree_head, + struct sram_piece *pused_head) { - int i, index = 0; + struct sram_piece *pslot, *plast, *pavail; + + if (!pfree_head || !pused_head) + return -1; /* search the relevant memory slot */ - for (i = 0; i < count; i++) { - if (pfree[i].paddr == addr) { - if (pfree[i].flag != SRAM_SLT_ALLOCATED) { - /* error log */ - return -1; - } - index = i; - break; - } + pslot = pused_head->next; + plast = pused_head; + + /* search an available piece slot */ + while (pslot != NULL && pslot->paddr != addr) { + plast = pslot; + pslot = pslot->next; } - if (i >= count) + + if (!pslot) return -1; - pfree[index].pid = 0; - pfree[index].flag = SRAM_SLT_FREE; - - /* link the next address slot */ - for (i = 0; i < count; i++) { - if (((pfree[index].paddr + pfree[index].size) == pfree[i].paddr) - && (pfree[i].flag == SRAM_SLT_FREE)) { - pfree[i].pid = 0; - pfree[i].flag = SRAM_SLT_NULL; - pfree[index].size += pfree[i].size; - pfree[index].flag = SRAM_SLT_FREE; - break; - } + plast->next = pslot->next; + pavail = pslot; + pavail->pid = 0; + + /* insert free pieces back to the free list */ + pslot = pfree_head->next; + plast = pfree_head; + + while (pslot != NULL && addr > pslot->paddr) { + plast = pslot; + pslot = pslot->next; + } + + if (plast != pfree_head && plast->paddr + plast->size == pavail->paddr) { + plast->size += pavail->size; + kmem_cache_free(sram_piece_cache, pavail); + } else { + pavail->next = plast; + plast->next = pavail; + plast = pavail; } - /* link the last address slot */ - for (i = 0; i < count; i++) { - if (((pfree[i].paddr + pfree[i].size) == pfree[index].paddr) && - (pfree[i].flag == SRAM_SLT_FREE)) { - pfree[index].flag = SRAM_SLT_NULL; - pfree[i].size += pfree[index].size; - break; - } + if (pslot && plast->paddr + plast->size == pslot->paddr) { + plast->size += pslot->size; + plast->next = pslot->next; + kmem_cache_free(sram_piece_cache, pslot); } return 0; @@ -273,6 +367,11 @@ int sram_free(const void *addr) && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH)) return l1_data_B_sram_free(addr); #endif +#ifdef L2_LENGTH + else if (addr >= (void *)L2_START + && addr < (void *)(L2_START + L2_LENGTH)) + return l2_sram_free(addr); +#endif else return -1; } @@ -287,7 +386,8 @@ void *l1_data_A_sram_alloc(size_t size) spin_lock_irqsave(&l1_data_sram_lock, flags); #if L1_DATA_A_LENGTH != 0 - addr = _l1_sram_alloc(size, l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram)); + addr = _sram_alloc(size, &free_l1_data_A_sram_head, + &used_l1_data_A_sram_head); #endif /* add mutex operation */ @@ -309,8 +409,8 @@ int l1_data_A_sram_free(const void *addr) spin_lock_irqsave(&l1_data_sram_lock, flags); #if L1_DATA_A_LENGTH != 0 - ret = _l1_sram_free(addr, - l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram)); + ret = _sram_free(addr, &free_l1_data_A_sram_head, + &used_l1_data_A_sram_head); #else ret = -1; #endif @@ -331,7 +431,8 @@ void *l1_data_B_sram_alloc(size_t size) /* add mutex operation */ spin_lock_irqsave(&l1_data_sram_lock, flags); - addr = _l1_sram_alloc(size, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram)); + addr = _sram_alloc(size, &free_l1_data_B_sram_head, + &used_l1_data_B_sram_head); /* add mutex operation */ spin_unlock_irqrestore(&l1_data_sram_lock, flags); @@ -355,7 +456,8 @@ int l1_data_B_sram_free(const void *addr) /* add mutex operation */ spin_lock_irqsave(&l1_data_sram_lock, flags); - ret = _l1_sram_free(addr, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram)); + ret = _sram_free(addr, &free_l1_data_B_sram_head, + &used_l1_data_B_sram_head); /* add mutex operation */ spin_unlock_irqrestore(&l1_data_sram_lock, flags); @@ -408,7 +510,8 @@ void *l1_inst_sram_alloc(size_t size) /* add mutex operation */ spin_lock_irqsave(&l1_inst_sram_lock, flags); - addr = _l1_sram_alloc(size, l1_inst_sram, ARRAY_SIZE(l1_inst_sram)); + addr = _sram_alloc(size, &free_l1_inst_sram_head, + &used_l1_inst_sram_head); /* add mutex operation */ spin_unlock_irqrestore(&l1_inst_sram_lock, flags); @@ -432,7 +535,8 @@ int l1_inst_sram_free(const void *addr) /* add mutex operation */ spin_lock_irqsave(&l1_inst_sram_lock, flags); - ret = _l1_sram_free(addr, l1_inst_sram, ARRAY_SIZE(l1_inst_sram)); + ret = _sram_free(addr, &free_l1_inst_sram_head, + &used_l1_inst_sram_head); /* add mutex operation */ spin_unlock_irqrestore(&l1_inst_sram_lock, flags); @@ -453,7 +557,8 @@ void *l1sram_alloc(size_t size) /* add mutex operation */ spin_lock_irqsave(&l1sram_lock, flags); - addr = _l1_sram_alloc(size, l1_ssram, ARRAY_SIZE(l1_ssram)); + addr = _sram_alloc(size, &free_l1_ssram_head, + &used_l1_ssram_head); /* add mutex operation */ spin_unlock_irqrestore(&l1sram_lock, flags); @@ -470,7 +575,8 @@ void *l1sram_alloc_max(size_t *psize) /* add mutex operation */ spin_lock_irqsave(&l1sram_lock, flags); - addr = _l1_sram_alloc_max(l1_ssram, ARRAY_SIZE(l1_ssram), psize); + addr = _sram_alloc_max(&free_l1_ssram_head, + &used_l1_ssram_head, psize); /* add mutex operation */ spin_unlock_irqrestore(&l1sram_lock, flags); @@ -487,7 +593,8 @@ int l1sram_free(const void *addr) /* add mutex operation */ spin_lock_irqsave(&l1sram_lock, flags); - ret = _l1_sram_free(addr, l1_ssram, ARRAY_SIZE(l1_ssram)); + ret = _sram_free(addr, &free_l1_ssram_head, + &used_l1_ssram_head); /* add mutex operation */ spin_unlock_irqrestore(&l1sram_lock, flags); @@ -495,6 +602,64 @@ int l1sram_free(const void *addr) return ret; } +void *l2_sram_alloc(size_t size) +{ +#ifdef L2_LENGTH + unsigned flags; + void *addr; + + /* add mutex operation */ + spin_lock_irqsave(&l2_sram_lock, flags); + + addr = _sram_alloc(size, &free_l2_sram_head, + &used_l2_sram_head); + + /* add mutex operation */ + spin_unlock_irqrestore(&l2_sram_lock, flags); + + pr_debug("Allocated address in l2_sram_alloc is 0x%lx+0x%lx\n", + (long unsigned int)addr, size); + + return addr; +#else + return NULL; +#endif +} +EXPORT_SYMBOL(l2_sram_alloc); + +void *l2_sram_zalloc(size_t size) +{ + void *addr = l2_sram_alloc(size); + + if (addr) + memset(addr, 0x00, size); + + return addr; +} +EXPORT_SYMBOL(l2_sram_zalloc); + +int l2_sram_free(const void *addr) +{ +#ifdef L2_LENGTH + unsigned flags; + int ret; + + /* add mutex operation */ + spin_lock_irqsave(&l2_sram_lock, flags); + + ret = _sram_free(addr, &free_l2_sram_head, + &used_l2_sram_head); + + /* add mutex operation */ + spin_unlock_irqrestore(&l2_sram_lock, flags); + + return ret; +#else + return -1; +#endif +} +EXPORT_SYMBOL(l2_sram_free); + int sram_free_with_lsl(const void *addr) { struct sram_list_struct *lsl, **tmp; @@ -533,6 +698,9 @@ void *sram_alloc_with_lsl(size_t size, unsigned long flags) if (addr == NULL && (flags & L1_DATA_B_SRAM)) addr = l1_data_B_sram_alloc(size); + if (addr == NULL && (flags & L2_SRAM)) + addr = l2_sram_alloc(size); + if (addr == NULL) { kfree(lsl); return NULL; @@ -549,49 +717,80 @@ EXPORT_SYMBOL(sram_alloc_with_lsl); /* Once we get a real allocator, we'll throw all of this away. * Until then, we need some sort of visibility into the L1 alloc. */ -static void _l1sram_proc_read(char *buf, int *len, const char *desc, - struct l1_sram_piece *pfree, const int array_size) +/* Need to keep line of output the same. Currently, that is 44 bytes + * (including newline). + */ +static int _sram_proc_read(char *buf, int *len, int count, const char *desc, + struct sram_piece *pfree_head, + struct sram_piece *pused_head) { - int i; - - *len += sprintf(&buf[*len], "--- L1 %-14s Size PID State\n", desc); - for (i = 0; i < array_size; ++i) { - const char *alloc_type; - switch (pfree[i].flag) { - case SRAM_SLT_NULL: alloc_type = "NULL"; break; - case SRAM_SLT_FREE: alloc_type = "FREE"; break; - case SRAM_SLT_ALLOCATED: alloc_type = "ALLOCATED"; break; - default: alloc_type = "????"; break; - } - *len += sprintf(&buf[*len], "%p-%p %8i %4i %s\n", - pfree[i].paddr, pfree[i].paddr + pfree[i].size, - pfree[i].size, pfree[i].pid, alloc_type); + struct sram_piece *pslot; + + if (!pfree_head || !pused_head) + return -1; + + *len += sprintf(&buf[*len], "--- SRAM %-14s Size PID State \n", desc); + + /* search the relevant memory slot */ + pslot = pused_head->next; + + while (pslot != NULL) { + *len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n", + pslot->paddr, pslot->paddr + pslot->size, + pslot->size, pslot->pid, "ALLOCATED"); + + pslot = pslot->next; } + + pslot = pfree_head->next; + + while (pslot != NULL) { + *len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n", + pslot->paddr, pslot->paddr + pslot->size, + pslot->size, pslot->pid, "FREE"); + + pslot = pslot->next; + } + + return 0; } -static int l1sram_proc_read(char *buf, char **start, off_t offset, int count, +static int sram_proc_read(char *buf, char **start, off_t offset, int count, int *eof, void *data) { int len = 0; - _l1sram_proc_read(buf, &len, "Scratchpad", - l1_ssram, ARRAY_SIZE(l1_ssram)); + if (_sram_proc_read(buf, &len, count, "Scratchpad", + &free_l1_ssram_head, &used_l1_ssram_head)) + goto not_done; #if L1_DATA_A_LENGTH != 0 - _l1sram_proc_read(buf, &len, "Data A", - l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram)); + if (_sram_proc_read(buf, &len, count, "L1 Data A", + &free_l1_data_A_sram_head, + &used_l1_data_A_sram_head)) + goto not_done; #endif #if L1_DATA_B_LENGTH != 0 - _l1sram_proc_read(buf, &len, "Data B", - l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram)); + if (_sram_proc_read(buf, &len, count, "L1 Data B", + &free_l1_data_B_sram_head, + &used_l1_data_B_sram_head)) + goto not_done; #endif #if L1_CODE_LENGTH != 0 - _l1sram_proc_read(buf, &len, "Instruction", - l1_inst_sram, ARRAY_SIZE(l1_inst_sram)); + if (_sram_proc_read(buf, &len, count, "L1 Instruction", + &free_l1_inst_sram_head, &used_l1_inst_sram_head)) + goto not_done; +#endif +#ifdef L2_LENGTH + if (_sram_proc_read(buf, &len, count, "L2", + &free_l2_sram_head, &used_l2_sram_head)) + goto not_done; #endif + *eof = 1; + not_done: return len; } -static int __init l1sram_proc_init(void) +static int __init sram_proc_init(void) { struct proc_dir_entry *ptr; ptr = create_proc_entry("sram", S_IFREG | S_IRUGO, NULL); @@ -600,8 +799,8 @@ static int __init l1sram_proc_init(void) return -1; } ptr->owner = THIS_MODULE; - ptr->read_proc = l1sram_proc_read; + ptr->read_proc = sram_proc_read; return 0; } -late_initcall(l1sram_proc_init); +late_initcall(sram_proc_init); #endif diff --git a/arch/blackfin/mm/blackfin_sram.h b/arch/blackfin/mm/blackfin_sram.h index 0fb73b78dd6..8cb0945563f 100644 --- a/arch/blackfin/mm/blackfin_sram.h +++ b/arch/blackfin/mm/blackfin_sram.h @@ -30,9 +30,7 @@ #ifndef __BLACKFIN_SRAM_H__ #define __BLACKFIN_SRAM_H__ -extern void l1sram_init(void); -extern void l1_inst_sram_init(void); -extern void l1_data_sram_init(void); +extern void bfin_sram_init(void); extern void *l1sram_alloc(size_t); #endif diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index ec3141fefd2..bc240abb874 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -53,33 +53,6 @@ static unsigned long empty_bad_page; unsigned long empty_zero_page; -void show_mem(void) -{ - unsigned long i; - int free = 0, total = 0, reserved = 0, shared = 0; - - int cached = 0; - printk(KERN_INFO "Mem-info:\n"); - show_free_areas(); - i = max_mapnr; - while (i-- > 0) { - total++; - if (PageReserved(mem_map + i)) - reserved++; - else if (PageSwapCache(mem_map + i)) - cached++; - else if (!page_count(mem_map + i)) - free++; - else - shared += page_count(mem_map + i) - 1; - } - printk(KERN_INFO "%d pages of RAM\n", total); - printk(KERN_INFO "%d free pages\n", free); - printk(KERN_INFO "%d reserved pages\n", reserved); - printk(KERN_INFO "%d pages shared\n", shared); - printk(KERN_INFO "%d pages swap cached\n", cached); -} - /* * paging_init() continues the virtual memory environment setup which * was begun by the code in arch/head.S. @@ -164,11 +137,14 @@ void __init mem_init(void) "(%uk init code, %uk kernel code, %uk data, %uk dma, %uk reserved)\n", (unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10, initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10))); +} + +static int __init sram_init(void) +{ + unsigned long tmp; /* Initialize the blackfin L1 Memory. */ - l1sram_init(); - l1_data_sram_init(); - l1_inst_sram_init(); + bfin_sram_init(); /* Allocate this once; never free it. We assume this gives us a pointer to the start of L1 scratchpad memory; panic if it @@ -179,7 +155,10 @@ void __init mem_init(void) tmp, (unsigned long)L1_SCRATCH_TASK_INFO); panic("No L1, time to give up\n"); } + + return 0; } +pure_initcall(sram_init); static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end) { diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c index a3ca5515074..6fea45f2e40 100644 --- a/arch/cris/arch-v10/kernel/kgdb.c +++ b/arch/cris/arch-v10/kernel/kgdb.c @@ -278,14 +278,6 @@ void putDebugChar (int val); void enableDebugIRQ (void); -/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte, - represented by int x. */ -static char highhex (int x); - -/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte, - represented by int x. */ -static char lowhex (int x); - /* Returns the integer equivalent of a hexadecimal character. */ static int hex (char ch); @@ -356,9 +348,6 @@ extern unsigned char executing_task; /* Run-length encoding maximum length. Send 64 at most. */ #define RUNLENMAX 64 -/* Definition of all valid hexadecimal characters */ -static const char hexchars[] = "0123456789abcdef"; - /* The inbound/outbound buffers used in packet I/O */ static char remcomInBuffer[BUFMAX]; static char remcomOutBuffer[BUFMAX]; @@ -499,8 +488,8 @@ gdb_cris_strtol (const char *s, char **endptr, int base) char *sd; int x = 0; - for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1) - x = x * base + (sd - hexchars); + for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1) + x = x * base + (sd - hex_asc); if (endptr) { @@ -670,22 +659,6 @@ read_register (char regno, unsigned int *valptr) } /********************************** Packet I/O ******************************/ -/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte, - represented by int x. */ -static inline char -highhex(int x) -{ - return hexchars[(x >> 4) & 0xf]; -} - -/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte, - represented by int x. */ -static inline char -lowhex(int x) -{ - return hexchars[x & 0xf]; -} - /* Returns the integer equivalent of a hexadecimal character. */ static int hex (char ch) @@ -721,8 +694,7 @@ mem2hex(char *buf, unsigned char *mem, int count) /* Valid mem address. */ for (i = 0; i < count; i++) { ch = *mem++; - *buf++ = highhex (ch); - *buf++ = lowhex (ch); + buf = pack_hex_byte(buf, ch); } } @@ -857,9 +829,9 @@ putpacket(char *buffer) src++; } } - putDebugChar ('#'); - putDebugChar (highhex (checksum)); - putDebugChar (lowhex (checksum)); + putDebugChar('#'); + putDebugChar(hex_asc_hi(checksum)); + putDebugChar(hex_asc_lo(checksum)); } while(kgdb_started && (getDebugChar() != '+')); } @@ -895,9 +867,8 @@ stub_is_stopped(int sigval) /* Send trap type (converted to signal) */ - *ptr++ = 'T'; - *ptr++ = highhex (sigval); - *ptr++ = lowhex (sigval); + *ptr++ = 'T'; + ptr = pack_hex_byte(ptr, sigval); /* Send register contents. We probably only need to send the * PC, frame pointer and stack pointer here. Other registers will be @@ -910,9 +881,7 @@ stub_is_stopped(int sigval) status = read_register (regno, ®_cont); if (status == SUCCESS) { - - *ptr++ = highhex (regno); - *ptr++ = lowhex (regno); + ptr = pack_hex_byte(ptr, regno); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, @@ -937,8 +906,8 @@ stub_is_stopped(int sigval) /* Store thread:r...; with the executing task TID. */ gdb_cris_strcpy (&remcomOutBuffer[pos], "thread:"); pos += gdb_cris_strlen ("thread:"); - remcomOutBuffer[pos++] = highhex (executing_task); - remcomOutBuffer[pos++] = lowhex (executing_task); + remcomOutBuffer[pos++] = hex_asc_hi(executing_task); + remcomOutBuffer[pos++] = hex_asc_lo(executing_task); gdb_cris_strcpy (&remcomOutBuffer[pos], ";"); #endif @@ -1126,8 +1095,8 @@ handle_exception (int sigval) Success: SAA, where AA is the signal number. Failure: void. */ remcomOutBuffer[0] = 'S'; - remcomOutBuffer[1] = highhex (sigval); - remcomOutBuffer[2] = lowhex (sigval); + remcomOutBuffer[1] = hex_asc_hi(sigval); + remcomOutBuffer[2] = hex_asc_lo(sigval); remcomOutBuffer[3] = 0; break; @@ -1224,23 +1193,23 @@ handle_exception (int sigval) case 'C': /* Identify the remote current thread. */ gdb_cris_strcpy (&remcomOutBuffer[0], "QC"); - remcomOutBuffer[2] = highhex (current_thread_c); - remcomOutBuffer[3] = lowhex (current_thread_c); + remcomOutBuffer[2] = hex_asc_hi(current_thread_c); + remcomOutBuffer[3] = hex_asc_lo(current_thread_c); remcomOutBuffer[4] = '\0'; break; case 'L': gdb_cris_strcpy (&remcomOutBuffer[0], "QM"); /* Reply with number of threads. */ if (os_is_started()) { - remcomOutBuffer[2] = highhex (number_of_tasks); - remcomOutBuffer[3] = lowhex (number_of_tasks); + remcomOutBuffer[2] = hex_asc_hi(number_of_tasks); + remcomOutBuffer[3] = hex_asc_lo(number_of_tasks); } else { - remcomOutBuffer[2] = highhex (0); - remcomOutBuffer[3] = lowhex (1); + remcomOutBuffer[2] = hex_asc_hi(0); + remcomOutBuffer[3] = hex_asc_lo(1); } /* Done with the reply. */ - remcomOutBuffer[4] = lowhex (1); + remcomOutBuffer[4] = hex_asc_lo(1); pos = 5; /* Expects the argument thread id. */ for (; pos < (5 + HEXCHARS_IN_THREAD_ID); pos++) @@ -1251,16 +1220,16 @@ handle_exception (int sigval) for (thread_id = 0; thread_id < number_of_tasks; thread_id++) { nextpos = pos + HEXCHARS_IN_THREAD_ID - 1; for (; pos < nextpos; pos ++) - remcomOutBuffer[pos] = lowhex (0); - remcomOutBuffer[pos++] = lowhex (thread_id); + remcomOutBuffer[pos] = hex_asc_lo(0); + remcomOutBuffer[pos++] = hex_asc_lo(thread_id); } } else { /* Store the thread identifier of the boot task. */ nextpos = pos + HEXCHARS_IN_THREAD_ID - 1; for (; pos < nextpos; pos ++) - remcomOutBuffer[pos] = lowhex (0); - remcomOutBuffer[pos++] = lowhex (current_thread_c); + remcomOutBuffer[pos] = hex_asc_lo(0); + remcomOutBuffer[pos++] = hex_asc_lo(current_thread_c); } remcomOutBuffer[pos] = '\0'; break; diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c index 4e2e2e271ef..8bd5a5bc0dc 100644 --- a/arch/cris/arch-v32/kernel/kgdb.c +++ b/arch/cris/arch-v32/kernel/kgdb.c @@ -398,14 +398,6 @@ void putDebugChar(int val) } #endif -/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte, - represented by int x. */ -static char highhex(int x); - -/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte, - represented by int x. */ -static char lowhex(int x); - /* Returns the integer equivalent of a hexadecimal character. */ static int hex(char ch); @@ -464,9 +456,6 @@ void breakpoint(void); /* Run-length encoding maximum length. Send 64 at most. */ #define RUNLENMAX 64 -/* Definition of all valid hexadecimal characters */ -static const char hexchars[] = "0123456789abcdef"; - /* The inbound/outbound buffers used in packet I/O */ static char input_buffer[BUFMAX]; static char output_buffer[BUFMAX]; @@ -550,8 +539,8 @@ gdb_cris_strtol(const char *s, char **endptr, int base) char *sd; int x = 0; - for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1) - x = x * base + (sd - hexchars); + for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1) + x = x * base + (sd - hex_asc); if (endptr) { /* Unconverted suffix is stored in endptr unless endptr is NULL. */ @@ -655,22 +644,6 @@ read_register(char regno, unsigned int *valptr) } /********************************** Packet I/O ******************************/ -/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte, - represented by int x. */ -static inline char -highhex(int x) -{ - return hexchars[(x >> 4) & 0xf]; -} - -/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte, - represented by int x. */ -static inline char -lowhex(int x) -{ - return hexchars[x & 0xf]; -} - /* Returns the integer equivalent of a hexadecimal character. */ static int hex(char ch) @@ -704,8 +677,7 @@ mem2hex(char *buf, unsigned char *mem, int count) /* Valid mem address. */ for (i = 0; i < count; i++) { ch = *mem++; - *buf++ = highhex (ch); - *buf++ = lowhex (ch); + buf = pack_hex_byte(buf, ch); } } /* Terminate properly. */ @@ -723,8 +695,7 @@ mem2hex_nbo(char *buf, unsigned char *mem, int count) mem += count - 1; for (i = 0; i < count; i++) { ch = *mem--; - *buf++ = highhex (ch); - *buf++ = lowhex (ch); + buf = pack_hex_byte(buf, ch); } /* Terminate properly. */ @@ -862,8 +833,8 @@ putpacket(char *buffer) } } putDebugChar('#'); - putDebugChar(highhex (checksum)); - putDebugChar(lowhex (checksum)); + putDebugChar(hex_asc_hi(checksum)); + putDebugChar(hex_asc_lo(checksum)); } while(kgdb_started && (getDebugChar() != '+')); } @@ -909,8 +880,7 @@ stub_is_stopped(int sigval) /* Send trap type (converted to signal) */ *ptr++ = 'T'; - *ptr++ = highhex(sigval); - *ptr++ = lowhex(sigval); + ptr = pack_hex_byte(ptr, sigval); if (((reg.exs & 0xff00) >> 8) == 0xc) { @@ -1018,30 +988,26 @@ stub_is_stopped(int sigval) } /* Only send PC, frame and stack pointer. */ read_register(PC, ®_cont); - *ptr++ = highhex(PC); - *ptr++ = lowhex(PC); + ptr = pack_hex_byte(PC); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[PC]); *ptr++ = ';'; read_register(R8, ®_cont); - *ptr++ = highhex(R8); - *ptr++ = lowhex(R8); + ptr = pack_hex_byte(R8); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[R8]); *ptr++ = ';'; read_register(SP, ®_cont); - *ptr++ = highhex(SP); - *ptr++ = lowhex(SP); + ptr = pack_hex_byte(SP); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[SP]); *ptr++ = ';'; /* Send ERP as well; this will save us an entire register fetch in some cases. */ read_register(ERP, ®_cont); - *ptr++ = highhex(ERP); - *ptr++ = lowhex(ERP); + ptr = pack_hex_byte(ERP); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[ERP]); *ptr++ = ';'; @@ -1533,8 +1499,8 @@ handle_exception(int sigval) Success: SAA, where AA is the signal number. Failure: void. */ output_buffer[0] = 'S'; - output_buffer[1] = highhex(sigval); - output_buffer[2] = lowhex(sigval); + output_buffer[1] = hex_asc_hi(sigval); + output_buffer[2] = hex_asc_lo(sigval); output_buffer[3] = 0; break; diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c index 5b06ffa15e3..2fdd212eb25 100644 --- a/arch/cris/mm/init.c +++ b/arch/cris/mm/init.c @@ -19,36 +19,6 @@ unsigned long empty_zero_page; extern char _stext, _edata, _etext; /* From linkerscript */ extern char __init_begin, __init_end; -void -show_mem(void) -{ - int i,free = 0,total = 0,cached = 0, reserved = 0, nonshared = 0; - int shared = 0; - - printk("\nMem-info:\n"); - show_free_areas(); - i = max_mapnr; - while (i-- > 0) { - total++; - if (PageReserved(mem_map+i)) - reserved++; - else if (PageSwapCache(mem_map+i)) - cached++; - else if (!page_count(mem_map+i)) - free++; - else if (page_count(mem_map+i) == 1) - nonshared++; - else - shared += page_count(mem_map+i) - 1; - } - printk("%d pages of RAM\n",total); - printk("%d free pages\n",free); - printk("%d reserved pages\n",reserved); - printk("%d pages nonshared\n",nonshared); - printk("%d pages shared\n",shared); - printk("%d pages swap cached\n",cached); -} - void __init mem_init(void) { diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c index 48a0393e7ce..7ca8a6b19ac 100644 --- a/arch/frv/kernel/gdb-stub.c +++ b/arch/frv/kernel/gdb-stub.c @@ -182,8 +182,6 @@ extern volatile u32 __attribute__((section(".bss"))) gdbstub_trace_through_excep static char input_buffer[BUFMAX]; static char output_buffer[BUFMAX]; -static const char hexchars[] = "0123456789abcdef"; - static const char *regnames[] = { "PSR ", "ISR ", "CCR ", "CCCR", "LR ", "LCR ", "PC ", "_stt", @@ -383,8 +381,8 @@ static int gdbstub_send_packet(char *buffer) } gdbstub_tx_char('#'); - gdbstub_tx_char(hexchars[checksum >> 4]); - gdbstub_tx_char(hexchars[checksum & 0xf]); + gdbstub_tx_char(hex_asc_hi(checksum)); + gdbstub_tx_char(hex_asc_lo(checksum)); } while (gdbstub_rx_char(&ch,0), #ifdef GDBSTUB_DEBUG_PROTOCOL @@ -674,8 +672,7 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa if ((uint32_t)mem&1 && count>=1) { if (!gdbstub_read_byte(mem,ch)) return NULL; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); mem++; count--; } @@ -683,10 +680,8 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa if ((uint32_t)mem&3 && count>=2) { if (!gdbstub_read_word(mem,(uint16_t *)ch)) return NULL; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; - *buf++ = hexchars[ch[1] >> 4]; - *buf++ = hexchars[ch[1] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); + buf = pack_hex_byte(buf, ch[1]); mem += 2; count -= 2; } @@ -694,14 +689,10 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa while (count>=4) { if (!gdbstub_read_dword(mem,(uint32_t *)ch)) return NULL; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; - *buf++ = hexchars[ch[1] >> 4]; - *buf++ = hexchars[ch[1] & 0xf]; - *buf++ = hexchars[ch[2] >> 4]; - *buf++ = hexchars[ch[2] & 0xf]; - *buf++ = hexchars[ch[3] >> 4]; - *buf++ = hexchars[ch[3] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); + buf = pack_hex_byte(buf, ch[1]); + buf = pack_hex_byte(buf, ch[2]); + buf = pack_hex_byte(buf, ch[3]); mem += 4; count -= 4; } @@ -709,10 +700,8 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa if (count>=2) { if (!gdbstub_read_word(mem,(uint16_t *)ch)) return NULL; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; - *buf++ = hexchars[ch[1] >> 4]; - *buf++ = hexchars[ch[1] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); + buf = pack_hex_byte(buf, ch[1]); mem += 2; count -= 2; } @@ -720,8 +709,7 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa if (count>=1) { if (!gdbstub_read_byte(mem,ch)) return NULL; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); } *buf = 0; @@ -1471,22 +1459,22 @@ void gdbstub(int sigval) *ptr++ = 'O'; ptr = mem2hex(title, ptr, sizeof(title) - 1,0); - hx = hexchars[(brr & 0xf0000000) >> 28]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(brr & 0x0f000000) >> 24]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(brr & 0x00f00000) >> 20]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(brr & 0x000f0000) >> 16]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(brr & 0x0000f000) >> 12]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(brr & 0x00000f00) >> 8]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(brr & 0x000000f0) >> 4]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(brr & 0x0000000f)]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; + hx = hex_asc_hi(brr >> 24); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(brr >> 24); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_hi(brr >> 16); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(brr >> 16); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_hi(brr >> 8); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(brr >> 8); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_hi(brr); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(brr); + ptr = pack_hex_byte(ptr, hx); ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0); *ptr = 0; @@ -1500,12 +1488,10 @@ void gdbstub(int sigval) /* Send trap type (converted to signal) */ *ptr++ = 'T'; - *ptr++ = hexchars[sigval >> 4]; - *ptr++ = hexchars[sigval & 0xf]; + ptr = pack_hex_byte(ptr, sigval); /* Send Error PC */ - *ptr++ = hexchars[GDB_REG_PC >> 4]; - *ptr++ = hexchars[GDB_REG_PC & 0xf]; + ptr = pack_hex_byte(ptr, GDB_REG_PC); *ptr++ = ':'; ptr = mem2hex(&__debug_frame->pc, ptr, 4, 0); *ptr++ = ';'; @@ -1513,8 +1499,7 @@ void gdbstub(int sigval) /* * Send frame pointer */ - *ptr++ = hexchars[GDB_REG_FP >> 4]; - *ptr++ = hexchars[GDB_REG_FP & 0xf]; + ptr = pack_hex_byte(ptr, GDB_REG_FP); *ptr++ = ':'; ptr = mem2hex(&__debug_frame->fp, ptr, 4, 0); *ptr++ = ';'; @@ -1522,8 +1507,7 @@ void gdbstub(int sigval) /* * Send stack pointer */ - *ptr++ = hexchars[GDB_REG_SP >> 4]; - *ptr++ = hexchars[GDB_REG_SP & 0xf]; + ptr = pack_hex_byte(ptr, GDB_REG_SP); *ptr++ = ':'; ptr = mem2hex(&__debug_frame->sp, ptr, 4, 0); *ptr++ = ';'; @@ -1548,8 +1532,8 @@ void gdbstub(int sigval) /* request repeat of last signal number */ case '?': output_buffer[0] = 'S'; - output_buffer[1] = hexchars[sigval >> 4]; - output_buffer[2] = hexchars[sigval & 0xf]; + output_buffer[1] = hex_asc_hi(sigval); + output_buffer[2] = hex_asc_lo(sigval); output_buffer[3] = 0; break; @@ -2059,8 +2043,8 @@ void gdbstub_exit(int status) } gdbstub_tx_char('#'); - gdbstub_tx_char(hexchars[checksum >> 4]); - gdbstub_tx_char(hexchars[checksum & 0xf]); + gdbstub_tx_char(hex_asc_hi(checksum)); + gdbstub_tx_char(hex_asc_lo(checksum)); /* make sure the output is flushed, or else RedBoot might clobber it */ gdbstub_tx_char('-'); diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c index 9af7740f32f..1b851db3418 100644 --- a/arch/frv/mm/init.c +++ b/arch/frv/mm/init.c @@ -63,37 +63,6 @@ EXPORT_SYMBOL(empty_zero_page); /*****************************************************************************/ /* - * - */ -void show_mem(void) -{ - unsigned long i; - int free = 0, total = 0, reserved = 0, shared = 0; - - printk("\nMem-info:\n"); - show_free_areas(); - i = max_mapnr; - while (i-- > 0) { - struct page *page = &mem_map[i]; - - total++; - if (PageReserved(page)) - reserved++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - } - - printk("%d pages of RAM\n",total); - printk("%d free pages\n",free); - printk("%d reserved pages\n",reserved); - printk("%d pages shared\n",shared); - -} /* end show_mem() */ - -/*****************************************************************************/ -/* * paging_init() continues the virtual memory environment setup which * was begun by the code in arch/head.S. * The parameters are pointers to where to stick the starting and ending diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c index e4f4199f97a..a1d228f5e4e 100644 --- a/arch/h8300/mm/init.c +++ b/arch/h8300/mm/init.c @@ -64,33 +64,6 @@ unsigned long empty_zero_page; extern unsigned long rom_length; -void show_mem(void) -{ - unsigned long i; - int free = 0, total = 0, reserved = 0, shared = 0; - int cached = 0; - - printk("\nMem-info:\n"); - show_free_areas(); - i = max_mapnr; - while (i-- > 0) { - total++; - if (PageReserved(mem_map+i)) - reserved++; - else if (PageSwapCache(mem_map+i)) - cached++; - else if (!page_count(mem_map+i)) - free++; - else - shared += page_count(mem_map+i) - 1; - } - printk("%d pages of RAM\n",total); - printk("%d free pages\n",free); - printk("%d reserved pages\n",reserved); - printk("%d pages shared\n",shared); - printk("%d pages swap cached\n",cached); -} - extern unsigned long memory_start; extern unsigned long memory_end; diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c index 1c44ec2a1d5..88b6e6f3fd8 100644 --- a/arch/ia64/hp/common/hwsw_iommu.c +++ b/arch/ia64/hp/common/hwsw_iommu.c @@ -186,9 +186,10 @@ hwsw_dma_supported (struct device *dev, u64 mask) } int -hwsw_dma_mapping_error (dma_addr_t dma_addr) +hwsw_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { - return hwiommu_dma_mapping_error (dma_addr) || swiotlb_dma_mapping_error(dma_addr); + return hwiommu_dma_mapping_error(dev, dma_addr) || + swiotlb_dma_mapping_error(dev, dma_addr); } EXPORT_SYMBOL(hwsw_dma_mapping_error); diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index 34421aed1e2..4956be40d7b 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -2147,7 +2147,7 @@ sba_dma_supported (struct device *dev, u64 mask) } int -sba_dma_mapping_error (dma_addr_t dma_addr) +sba_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { return 0; } diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 19d4493c619..fc8f3509df2 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -2626,7 +2626,7 @@ pfm_task_incompatible(pfm_context_t *ctx, struct task_struct *task) /* * make sure the task is off any CPU */ - wait_task_inactive(task); + wait_task_inactive(task, 0); /* more to come... */ @@ -4774,7 +4774,7 @@ recheck: UNPROTECT_CTX(ctx, flags); - wait_task_inactive(task); + wait_task_inactive(task, 0); PROTECT_CTX(ctx, flags); diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 2672f4d278a..7a37d06376b 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -125,9 +125,9 @@ void kvm_arch_hardware_enable(void *garbage) PAGE_KERNEL)); local_irq_save(saved_psr); slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT); + local_irq_restore(saved_psr); if (slot < 0) return; - local_irq_restore(saved_psr); spin_lock(&vp_lock); status = ia64_pal_vp_init_env(kvm_vsa_base ? @@ -160,9 +160,9 @@ void kvm_arch_hardware_disable(void *garbage) local_irq_save(saved_psr); slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT); + local_irq_restore(saved_psr); if (slot < 0) return; - local_irq_restore(saved_psr); status = ia64_pal_vp_exit_env(host_iva); if (status) @@ -1253,6 +1253,7 @@ static int vti_vcpu_setup(struct kvm_vcpu *vcpu, int id) uninit: kvm_vcpu_uninit(vcpu); fail: + local_irq_restore(psr); return r; } diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c index 52175af299a..53ebb648449 100644 --- a/arch/ia64/sn/pci/pci_dma.c +++ b/arch/ia64/sn/pci/pci_dma.c @@ -350,7 +350,7 @@ void sn_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, } EXPORT_SYMBOL(sn_dma_sync_sg_for_device); -int sn_dma_mapping_error(dma_addr_t dma_addr) +int sn_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { return 0; } diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c index 2554eb59cfe..24d429f9358 100644 --- a/arch/m32r/mm/init.c +++ b/arch/m32r/mm/init.c @@ -36,42 +36,6 @@ pgd_t swapper_pg_dir[1024]; DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); -void show_mem(void) -{ - int total = 0, reserved = 0; - int shared = 0, cached = 0; - int highmem = 0; - struct page *page; - pg_data_t *pgdat; - unsigned long i; - - printk("Mem-info:\n"); - show_free_areas(); - printk("Free swap: %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_online_pgdat(pgdat) { - unsigned long flags; - pgdat_resize_lock(pgdat, &flags); - for (i = 0; i < pgdat->node_spanned_pages; ++i) { - page = pgdat_page_nr(pgdat, i); - total++; - if (PageHighMem(page)) - highmem++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - pgdat_resize_unlock(pgdat, &flags); - } - printk("%d pages of RAM\n", total); - printk("%d pages of HIGHMEM\n",highmem); - printk("%d reserved pages\n",reserved); - printk("%d pages shared\n",shared); - printk("%d pages swap cached\n",cached); -} - /* * Cache of MMU context last used. */ diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c index 79f5f94d480..81bb08ceec1 100644 --- a/arch/m68k/mm/init.c +++ b/arch/m68k/mm/init.c @@ -69,36 +69,6 @@ void __init m68k_setup_node(int node) void *empty_zero_page; EXPORT_SYMBOL(empty_zero_page); -void show_mem(void) -{ - pg_data_t *pgdat; - int free = 0, total = 0, reserved = 0, shared = 0; - int cached = 0; - int i; - - printk("\nMem-info:\n"); - show_free_areas(); - for_each_online_pgdat(pgdat) { - for (i = 0; i < pgdat->node_spanned_pages; i++) { - struct page *page = pgdat->node_mem_map + i; - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - } - } - printk("%d pages of RAM\n",total); - printk("%d free pages\n",free); - printk("%d reserved pages\n",reserved); - printk("%d pages shared\n",shared); - printk("%d pages swap cached\n",cached); -} - extern void init_pointer_table(unsigned long ptable); /* References to section boundaries */ diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c index 22e2a0d02b8..3bf249c53e4 100644 --- a/arch/m68knommu/mm/init.c +++ b/arch/m68knommu/mm/init.c @@ -62,33 +62,6 @@ static unsigned long empty_bad_page; unsigned long empty_zero_page; -void show_mem(void) -{ - unsigned long i; - int free = 0, total = 0, reserved = 0, shared = 0; - int cached = 0; - - printk(KERN_INFO "\nMem-info:\n"); - show_free_areas(); - i = max_mapnr; - while (i-- > 0) { - total++; - if (PageReserved(mem_map+i)) - reserved++; - else if (PageSwapCache(mem_map+i)) - cached++; - else if (!page_count(mem_map+i)) - free++; - else - shared += page_count(mem_map+i) - 1; - } - printk(KERN_INFO "%d pages of RAM\n",total); - printk(KERN_INFO "%d free pages\n",free); - printk(KERN_INFO "%d reserved pages\n",reserved); - printk(KERN_INFO "%d pages shared\n",shared); - printk(KERN_INFO "%d pages swap cached\n",cached); -} - extern unsigned long memory_start; extern unsigned long memory_end; diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index 48731020ca0..44e8dd8106b 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -3,8 +3,7 @@ # obj-y += cache.o dma-default.o extable.o fault.o \ - init.o pgtable.o tlbex.o tlbex-fault.o \ - uasm.o page.o + init.o tlbex.o tlbex-fault.o uasm.o page.o obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o obj-$(CONFIG_64BIT) += pgtable-64.o diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index ae39dd88b9a..891312f8e5a 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -348,7 +348,7 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele EXPORT_SYMBOL(dma_sync_sg_for_device); -int dma_mapping_error(dma_addr_t dma_addr) +int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { return 0; } diff --git a/arch/mips/mm/pgtable.c b/arch/mips/mm/pgtable.c deleted file mode 100644 index 7dfa579ab24..00000000000 --- a/arch/mips/mm/pgtable.c +++ /dev/null @@ -1,36 +0,0 @@ -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/swap.h> - -void show_mem(void) -{ -#ifndef CONFIG_NEED_MULTIPLE_NODES /* XXX(hch): later.. */ - int pfn, total = 0, reserved = 0; - int shared = 0, cached = 0; - int highmem = 0; - struct page *page; - - printk("Mem-info:\n"); - show_free_areas(); - pfn = max_mapnr; - while (pfn-- > 0) { - if (!pfn_valid(pfn)) - continue; - page = pfn_to_page(pfn); - total++; - if (PageHighMem(page)) - highmem++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - printk("%d pages of RAM\n", total); - printk("%d pages of HIGHMEM\n", highmem); - printk("%d reserved pages\n", reserved); - printk("%d pages shared\n", shared); - printk("%d pages swap cached\n", cached); -#endif -} diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c index 21891c71d54..54be6afb555 100644 --- a/arch/mn10300/kernel/gdb-stub.c +++ b/arch/mn10300/kernel/gdb-stub.c @@ -163,8 +163,6 @@ static char input_buffer[BUFMAX]; static char output_buffer[BUFMAX]; static char trans_buffer[BUFMAX]; -static const char hexchars[] = "0123456789abcdef"; - struct gdbstub_bkpt { u8 *addr; /* address of breakpoint */ u8 len; /* size of breakpoint */ @@ -363,8 +361,8 @@ static int putpacket(char *buffer) } gdbstub_io_tx_char('#'); - gdbstub_io_tx_char(hexchars[checksum >> 4]); - gdbstub_io_tx_char(hexchars[checksum & 0xf]); + gdbstub_io_tx_char(hex_asc_hi(checksum)); + gdbstub_io_tx_char(hex_asc_lo(checksum)); } while (gdbstub_io_rx_char(&ch, 0), ch == '-' && (gdbstub_io("### GDB Rx NAK\n"), 0), @@ -822,8 +820,7 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault) if ((u32) mem & 1 && count >= 1) { if (gdbstub_read_byte(mem, ch) != 0) return 0; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); mem++; count--; } @@ -831,10 +828,8 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault) if ((u32) mem & 3 && count >= 2) { if (gdbstub_read_word(mem, ch) != 0) return 0; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; - *buf++ = hexchars[ch[1] >> 4]; - *buf++ = hexchars[ch[1] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); + buf = pack_hex_byte(buf, ch[1]); mem += 2; count -= 2; } @@ -842,14 +837,10 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault) while (count >= 4) { if (gdbstub_read_dword(mem, ch) != 0) return 0; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; - *buf++ = hexchars[ch[1] >> 4]; - *buf++ = hexchars[ch[1] & 0xf]; - *buf++ = hexchars[ch[2] >> 4]; - *buf++ = hexchars[ch[2] & 0xf]; - *buf++ = hexchars[ch[3] >> 4]; - *buf++ = hexchars[ch[3] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); + buf = pack_hex_byte(buf, ch[1]); + buf = pack_hex_byte(buf, ch[2]); + buf = pack_hex_byte(buf, ch[3]); mem += 4; count -= 4; } @@ -857,10 +848,8 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault) if (count >= 2) { if (gdbstub_read_word(mem, ch) != 0) return 0; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; - *buf++ = hexchars[ch[1] >> 4]; - *buf++ = hexchars[ch[1] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); + buf = pack_hex_byte(buf, ch[1]); mem += 2; count -= 2; } @@ -868,8 +857,7 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault) if (count >= 1) { if (gdbstub_read_byte(mem, ch) != 0) return 0; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); } *buf = 0; @@ -1304,14 +1292,14 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep) *ptr++ = 'O'; ptr = mem2hex(title, ptr, sizeof(title) - 1, 0); - hx = hexchars[(excep & 0xf000) >> 12]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(excep & 0x0f00) >> 8]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(excep & 0x00f0) >> 4]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(excep & 0x000f)]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; + hx = hex_asc_hi(excep >> 8); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(excep >> 8); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_hi(excep); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(excep); + ptr = pack_hex_byte(ptr, hx); ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0); *ptr = 0; @@ -1322,22 +1310,22 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep) *ptr++ = 'O'; ptr = mem2hex(tbcberr, ptr, sizeof(tbcberr) - 1, 0); - hx = hexchars[(bcberr & 0xf0000000) >> 28]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(bcberr & 0x0f000000) >> 24]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(bcberr & 0x00f00000) >> 20]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(bcberr & 0x000f0000) >> 16]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(bcberr & 0x0000f000) >> 12]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(bcberr & 0x00000f00) >> 8]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(bcberr & 0x000000f0) >> 4]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(bcberr & 0x0000000f)]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; + hx = hex_asc_hi(bcberr >> 24); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(bcberr >> 24); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_hi(bcberr >> 16); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(bcberr >> 16); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_hi(bcberr >> 8); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(bcberr >> 8); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_hi(bcberr); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(bcberr); + ptr = pack_hex_byte(ptr, hx); ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0); *ptr = 0; @@ -1353,14 +1341,12 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep) * Send trap type (converted to signal) */ *ptr++ = 'T'; - *ptr++ = hexchars[sigval >> 4]; - *ptr++ = hexchars[sigval & 0xf]; + ptr = pack_hex_byte(ptr, sigval); /* * Send Error PC */ - *ptr++ = hexchars[GDB_REGID_PC >> 4]; - *ptr++ = hexchars[GDB_REGID_PC & 0xf]; + ptr = pack_hex_byte(ptr, GDB_REGID_PC); *ptr++ = ':'; ptr = mem2hex(®s->pc, ptr, 4, 0); *ptr++ = ';'; @@ -1368,8 +1354,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep) /* * Send frame pointer */ - *ptr++ = hexchars[GDB_REGID_FP >> 4]; - *ptr++ = hexchars[GDB_REGID_FP & 0xf]; + ptr = pack_hex_byte(ptr, GDB_REGID_FP); *ptr++ = ':'; ptr = mem2hex(®s->a3, ptr, 4, 0); *ptr++ = ';'; @@ -1378,8 +1363,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep) * Send stack pointer */ ssp = (unsigned long) (regs + 1); - *ptr++ = hexchars[GDB_REGID_SP >> 4]; - *ptr++ = hexchars[GDB_REGID_SP & 0xf]; + ptr = pack_hex_byte(ptr, GDB_REGID_SP); *ptr++ = ':'; ptr = mem2hex(&ssp, ptr, 4, 0); *ptr++ = ';'; @@ -1399,8 +1383,8 @@ packet_waiting: /* request repeat of last signal number */ case '?': output_buffer[0] = 'S'; - output_buffer[1] = hexchars[sigval >> 4]; - output_buffer[2] = hexchars[sigval & 0xf]; + output_buffer[1] = hex_asc_hi(sigval); + output_buffer[2] = hex_asc_lo(sigval); output_buffer[3] = 0; break; @@ -1838,8 +1822,8 @@ void gdbstub_exit(int status) gdbstub_busy = 1; output_buffer[0] = 'W'; - output_buffer[1] = hexchars[(status >> 4) & 0x0F]; - output_buffer[2] = hexchars[status & 0x0F]; + output_buffer[1] = hex_asc_hi(status); + output_buffer[2] = hex_asc_lo(status); output_buffer[3] = 0; gdbstub_io_tx_char('$'); @@ -1853,8 +1837,8 @@ void gdbstub_exit(int status) } gdbstub_io_tx_char('#'); - gdbstub_io_tx_char(hexchars[checksum >> 4]); - gdbstub_io_tx_char(hexchars[checksum & 0xf]); + gdbstub_io_tx_char(hex_asc_hi(checksum)); + gdbstub_io_tx_char(hex_asc_lo(checksum)); /* make sure the output is flushed, or else RedBoot might clobber it */ gdbstub_io_tx_flush(); diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c index a477038752b..baffc581e03 100644 --- a/arch/mn10300/mm/pgtable.c +++ b/arch/mn10300/mm/pgtable.c @@ -27,33 +27,6 @@ #include <asm/tlb.h> #include <asm/tlbflush.h> -void show_mem(void) -{ - unsigned long i; - int free = 0, total = 0, reserved = 0, shared = 0; - - int cached = 0; - printk(KERN_INFO "Mem-info:\n"); - show_free_areas(); - i = max_mapnr; - while (i-- > 0) { - total++; - if (PageReserved(mem_map + i)) - reserved++; - else if (PageSwapCache(mem_map + i)) - cached++; - else if (!page_count(mem_map + i)) - free++; - else - shared += page_count(mem_map + i) - 1; - } - printk(KERN_INFO "%d pages of RAM\n", total); - printk(KERN_INFO "%d free pages\n", free); - printk(KERN_INFO "%d reserved pages\n", reserved); - printk(KERN_INFO "%d pages shared\n", shared); - printk(KERN_INFO "%d pages swap cached\n", cached); -} - /* * Associate a large virtual page frame with a given physical page frame * and protection flags for that frame. pfn is for the base of the page, diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c index be255ebb609..18072e03a01 100644 --- a/arch/parisc/hpux/sys_hpux.c +++ b/arch/parisc/hpux/sys_hpux.c @@ -210,19 +210,19 @@ static int vfs_statfs_hpux(struct dentry *dentry, struct hpux_statfs *buf) } /* hpux statfs */ -asmlinkage long hpux_statfs(const char __user *path, +asmlinkage long hpux_statfs(const char __user *pathname, struct hpux_statfs __user *buf) { - struct nameidata nd; + struct path path; int error; - error = user_path_walk(path, &nd); + error = user_path(pathname, &path); if (!error) { struct hpux_statfs tmp; - error = vfs_statfs_hpux(nd.path.dentry, &tmp); + error = vfs_statfs_hpux(path.dentry, &tmp); if (!error && copy_to_user(buf, &tmp, sizeof(tmp))) error = -EFAULT; - path_put(&nd.path); + path_put(&path); } return error; } diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index fe88418167c..587da5e0990 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -117,6 +117,7 @@ config PPC select HAVE_KPROBES select HAVE_ARCH_KGDB select HAVE_KRETPROBES + select HAVE_ARCH_TRACEHOOK select HAVE_LMB select HAVE_DMA_ATTRS if PPC64 select USE_GENERIC_SMP_HELPERS if SMP diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 81c8324a4a3..1cbbf703364 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -148,7 +148,7 @@ transfer_to_handler: /* Check to see if the dbcr0 register is set up to debug. Use the internal debug mode bit to do this. */ lwz r12,THREAD_DBCR0(r12) - andis. r12,r12,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h + andis. r12,r12,DBCR0_IDM@h beq+ 3f /* From user and task is ptraced - load up global dbcr0 */ li r12,-1 /* clear all pending debug events */ @@ -292,7 +292,7 @@ syscall_exit_cont: /* If the process has its own DBCR0 value, load it up. The internal debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h + andis. r10,r0,DBCR0_IDM@h bnel- load_dbcr0 #endif #ifdef CONFIG_44x @@ -343,7 +343,12 @@ syscall_dotrace: stw r0,_TRAP(r1) addi r3,r1,STACK_FRAME_OVERHEAD bl do_syscall_trace_enter - lwz r0,GPR0(r1) /* Restore original registers */ + /* + * Restore argument registers possibly just changed. + * We use the return value of do_syscall_trace_enter + * for call number to look up in the table (r0). + */ + mr r0,r3 lwz r3,GPR3(r1) lwz r4,GPR4(r1) lwz r5,GPR5(r1) @@ -720,7 +725,7 @@ restore_user: /* Check whether this process has its own DBCR0 value. The internal debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h + andis. r10,r0,DBCR0_IDM@h bnel- load_dbcr0 #endif @@ -1055,8 +1060,8 @@ do_user_signal: /* r10 contains MSR_KERNEL here */ SAVE_NVGPRS(r1) rlwinm r3,r3,0,0,30 stw r3,_TRAP(r1) -2: li r3,0 - addi r4,r1,STACK_FRAME_OVERHEAD +2: addi r3,r1,STACK_FRAME_OVERHEAD + mr r4,r9 bl do_signal REST_NVGPRS(r1) b recheck diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index d7369243ae4..2d802e97097 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -214,7 +214,12 @@ syscall_dotrace: bl .save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl .do_syscall_trace_enter - ld r0,GPR0(r1) /* Restore original registers */ + /* + * Restore argument registers possibly just changed. + * We use the return value of do_syscall_trace_enter + * for the call number to look up in the table (r0). + */ + mr r0,r3 ld r3,GPR3(r1) ld r4,GPR4(r1) ld r5,GPR5(r1) @@ -638,8 +643,7 @@ user_work: b .ret_from_except_lite 1: bl .save_nvgprs - li r3,0 - addi r4,r1,STACK_FRAME_OVERHEAD + addi r3,r1,STACK_FRAME_OVERHEAD bl .do_signal b .ret_from_except diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 4d96e1db55e..9ddfaef1a18 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -493,18 +493,18 @@ static int __init serial_dev_init(void) device_initcall(serial_dev_init); +#ifdef CONFIG_SERIAL_8250_CONSOLE /* * This is called very early, as part of console_init() (typically just after * time_init()). This function is respondible for trying to find a good * default console on serial ports. It tries to match the open firmware - * default output with one of the available serial console drivers, either - * one of the platform serial ports that have been probed earlier by - * find_legacy_serial_ports() or some more platform specific ones. + * default output with one of the available serial console drivers that have + * been probed earlier by find_legacy_serial_ports() */ static int __init check_legacy_serial_console(void) { struct device_node *prom_stdout = NULL; - int speed = 0, offset = 0; + int i, speed = 0, offset = 0; const char *name; const u32 *spd; @@ -548,31 +548,20 @@ static int __init check_legacy_serial_console(void) if (spd) speed = *spd; - if (0) - ; -#ifdef CONFIG_SERIAL_8250_CONSOLE - else if (strcmp(name, "serial") == 0) { - int i; - /* Look for it in probed array */ - for (i = 0; i < legacy_serial_count; i++) { - if (prom_stdout != legacy_serial_infos[i].np) - continue; - offset = i; - speed = legacy_serial_infos[i].speed; - break; - } - if (i >= legacy_serial_count) - goto not_found; + if (strcmp(name, "serial") != 0) + goto not_found; + + /* Look for it in probed array */ + for (i = 0; i < legacy_serial_count; i++) { + if (prom_stdout != legacy_serial_infos[i].np) + continue; + offset = i; + speed = legacy_serial_infos[i].speed; + break; } -#endif /* CONFIG_SERIAL_8250_CONSOLE */ -#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE - else if (strcmp(name, "ch-a") == 0) - offset = 0; - else if (strcmp(name, "ch-b") == 0) - offset = 1; -#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ - else + if (i >= legacy_serial_count) goto not_found; + of_node_put(prom_stdout); DBG("Found serial console at ttyS%d\n", offset); @@ -591,3 +580,4 @@ static int __init check_legacy_serial_console(void) } console_initcall(check_legacy_serial_console); +#endif /* CONFIG_SERIAL_8250_CONSOLE */ diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index 29a0e039d43..aab76887a84 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -48,7 +48,7 @@ void machine_kexec_cleanup(struct kimage *image) * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. */ -NORET_TYPE void machine_kexec(struct kimage *image) +void machine_kexec(struct kimage *image) { if (ppc_md.machine_kexec) ppc_md.machine_kexec(image); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index db2497ccc11..e030f3bd502 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -254,7 +254,7 @@ void do_dabr(struct pt_regs *regs, unsigned long address, return; /* Clear the DAC and struct entries. One shot trigger */ -#if (defined(CONFIG_44x) || defined(CONFIG_BOOKE)) +#if defined(CONFIG_BOOKE) mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM)); #endif @@ -286,7 +286,7 @@ int set_dabr(unsigned long dabr) mtspr(SPRN_DABR, dabr); #endif -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) mtspr(SPRN_DAC1, dabr); #endif @@ -373,7 +373,7 @@ struct task_struct *__switch_to(struct task_struct *prev, if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) set_dabr(new->thread.dabr); -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) /* If new thread DAC (HW breakpoint) is the same then leave it */ if (new->thread.dabr) set_dabr(new->thread.dabr); @@ -568,7 +568,7 @@ void flush_thread(void) current->thread.dabr = 0; set_dabr(0); -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W); #endif } diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index c4ab2195b9c..b72849ac7db 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -205,8 +205,6 @@ static int __initdata mem_reserve_cnt; static cell_t __initdata regbuf[1024]; -#define MAX_CPU_THREADS 2 - /* * Error results ... some OF calls will return "-1" on error, some * will return 0, some will return either. To simplify, here are @@ -1339,10 +1337,6 @@ static void __init prom_hold_cpus(void) unsigned int reg; phandle node; char type[64]; - int cpuid = 0; - unsigned int interrupt_server[MAX_CPU_THREADS]; - unsigned int cpu_threads, hw_cpu_num; - int propsize; struct prom_t *_prom = &RELOC(prom); unsigned long *spinloop = (void *) LOW_ADDR(__secondary_hold_spinloop); @@ -1386,7 +1380,6 @@ static void __init prom_hold_cpus(void) reg = -1; prom_getprop(node, "reg", ®, sizeof(reg)); - prom_debug("\ncpuid = 0x%x\n", cpuid); prom_debug("cpu hw idx = 0x%x\n", reg); /* Init the acknowledge var which will be reset by @@ -1395,28 +1388,9 @@ static void __init prom_hold_cpus(void) */ *acknowledge = (unsigned long)-1; - propsize = prom_getprop(node, "ibm,ppc-interrupt-server#s", - &interrupt_server, - sizeof(interrupt_server)); - if (propsize < 0) { - /* no property. old hardware has no SMT */ - cpu_threads = 1; - interrupt_server[0] = reg; /* fake it with phys id */ - } else { - /* We have a threaded processor */ - cpu_threads = propsize / sizeof(u32); - if (cpu_threads > MAX_CPU_THREADS) { - prom_printf("SMT: too many threads!\n" - "SMT: found %x, max is %x\n", - cpu_threads, MAX_CPU_THREADS); - cpu_threads = 1; /* ToDo: panic? */ - } - } - - hw_cpu_num = interrupt_server[0]; - if (hw_cpu_num != _prom->cpu) { + if (reg != _prom->cpu) { /* Primary Thread of non-boot cpu */ - prom_printf("%x : starting cpu hw idx %x... ", cpuid, reg); + prom_printf("starting cpu hw idx %x... ", reg); call_prom("start-cpu", 3, 0, node, secondary_hold, reg); @@ -1431,17 +1405,10 @@ static void __init prom_hold_cpus(void) } #ifdef CONFIG_SMP else - prom_printf("%x : boot cpu %x\n", cpuid, reg); + prom_printf("boot cpu hw idx %x\n", reg); #endif /* CONFIG_SMP */ - - /* Reserve cpu #s for secondary threads. They start later. */ - cpuid += cpu_threads; } - if (cpuid > NR_CPUS) - prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS) - ") exceeded: ignoring extras\n"); - prom_debug("prom_hold_cpus: end...\n"); } diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index a5d0e78779c..6b66cd85b43 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -22,6 +22,7 @@ #include <linux/errno.h> #include <linux/ptrace.h> #include <linux/regset.h> +#include <linux/tracehook.h> #include <linux/elf.h> #include <linux/user.h> #include <linux/security.h> @@ -717,7 +718,7 @@ void user_disable_single_step(struct task_struct *task) struct pt_regs *regs = task->thread.regs; -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) /* If DAC then do not single step, skip */ if (task->thread.dabr) return; @@ -744,10 +745,11 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, if (addr > 0) return -EINVAL; + /* The bottom 3 bits in dabr are flags */ if ((data & ~0x7UL) >= TASK_SIZE) return -EIO; -#ifdef CONFIG_PPC64 +#ifndef CONFIG_BOOKE /* For processors using DABR (i.e. 970), the bottom 3 bits are flags. * It was assumed, on previous implementations, that 3 bits were @@ -769,7 +771,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, task->thread.dabr = data; #endif -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) /* As described above, it was assumed 3 bits were passed with the data * address, but we will assume only the mode bits will be passed @@ -1013,31 +1015,24 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return ret; } -static void do_syscall_trace(void) +/* + * We must return the syscall number to actually look up in the table. + * This can be -1L to skip running any syscall at all. + */ +long do_syscall_trace_enter(struct pt_regs *regs) { - /* the 0x80 provides a way for the tracing parent to distinguish - between a syscall stop and SIGTRAP delivery */ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) - ? 0x80 : 0)); - - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } -} + long ret = 0; -void do_syscall_trace_enter(struct pt_regs *regs) -{ secure_computing(regs->gpr[0]); - if (test_thread_flag(TIF_SYSCALL_TRACE) - && (current->ptrace & PT_PTRACED)) - do_syscall_trace(); + if (test_thread_flag(TIF_SYSCALL_TRACE) && + tracehook_report_syscall_entry(regs)) + /* + * Tracing decided this syscall should not happen. + * We'll return a bogus call number to get an ENOSYS + * error, but leave the original number in regs->gpr[0]. + */ + ret = -1L; if (unlikely(current->audit_context)) { #ifdef CONFIG_PPC64 @@ -1055,16 +1050,19 @@ void do_syscall_trace_enter(struct pt_regs *regs) regs->gpr[5] & 0xffffffff, regs->gpr[6] & 0xffffffff); } + + return ret ?: regs->gpr[0]; } void do_syscall_trace_leave(struct pt_regs *regs) { + int step; + if (unlikely(current->audit_context)) audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, regs->result); - if ((test_thread_flag(TIF_SYSCALL_TRACE) - || test_thread_flag(TIF_SINGLESTEP)) - && (current->ptrace & PT_PTRACED)) - do_syscall_trace(); + step = test_thread_flag(TIF_SINGLESTEP); + if (step || test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, step); } diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 09ded5c424a..149cb112cd1 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -286,7 +286,7 @@ static ssize_t rtas_flash_read(struct file *file, char __user *buf, } /* constructor for flash_block_cache */ -void rtas_block_ctor(struct kmem_cache *cache, void *ptr) +void rtas_block_ctor(void *ptr) { memset(ptr, 0, RTAS_BLK_SIZE); } diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 61a3f413208..9cc5a52711e 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -367,7 +367,6 @@ static void __init cpu_init_thread_core_maps(int tpc) * setup_cpu_maps - initialize the following cpu maps: * cpu_possible_map * cpu_present_map - * cpu_sibling_map * * Having the possible map set up early allows us to restrict allocations * of things like irqstacks to num_possible_cpus() rather than NR_CPUS. @@ -475,29 +474,6 @@ void __init smp_setup_cpu_maps(void) */ cpu_init_thread_core_maps(nthreads); } - -/* - * Being that cpu_sibling_map is now a per_cpu array, then it cannot - * be initialized until the per_cpu areas have been created. This - * function is now called from setup_per_cpu_areas(). - */ -void __init smp_setup_cpu_sibling_map(void) -{ -#ifdef CONFIG_PPC64 - int i, cpu, base; - - for_each_possible_cpu(cpu) { - DBG("Sibling map for CPU %d:", cpu); - base = cpu_first_thread_in_core(cpu); - for (i = 0; i < threads_per_core; i++) { - cpu_set(base + i, per_cpu(cpu_sibling_map, cpu)); - DBG(" %d", base + i); - } - DBG("\n"); - } - -#endif /* CONFIG_PPC64 */ -} #endif /* CONFIG_SMP */ #ifdef CONFIG_PCSPKR_PLATFORM diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 04d8de9f0fc..8b25f51f03b 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -611,9 +611,6 @@ void __init setup_per_cpu_areas(void) paca[i].data_offset = ptr - __per_cpu_start; memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); } - - /* Now that per_cpu is setup, initialize cpu_sibling_map */ - smp_setup_cpu_sibling_map(); } #endif diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 7aada783ec6..a54405ebd7b 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -9,7 +9,7 @@ * this archive for more details. */ -#include <linux/ptrace.h> +#include <linux/tracehook.h> #include <linux/signal.h> #include <asm/uaccess.h> #include <asm/unistd.h> @@ -112,7 +112,7 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka, } } -int do_signal(sigset_t *oldset, struct pt_regs *regs) +static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs) { siginfo_t info; int signr; @@ -147,7 +147,7 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs) */ if (current->thread.dabr) { set_dabr(current->thread.dabr); -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) mtspr(SPRN_DBCR0, current->thread.dbcr0); #endif } @@ -177,11 +177,28 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs) * its frame, and we can clear the TLF_RESTORE_SIGMASK flag. */ current_thread_info()->local_flags &= ~_TLF_RESTORE_SIGMASK; + + /* + * Let tracing know that we've done the handler setup. + */ + tracehook_signal_handler(signr, &info, &ka, regs, + test_thread_flag(TIF_SINGLESTEP)); } return ret; } +void do_signal(struct pt_regs *regs, unsigned long thread_info_flags) +{ + if (thread_info_flags & _TIF_SIGPENDING) + do_signal_pending(NULL, regs); + + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + } +} + long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, unsigned long r5, unsigned long r6, unsigned long r7, unsigned long r8, struct pt_regs *regs) diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index f5ae9fa222e..5337ca7bb64 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -41,6 +41,7 @@ #include <asm/smp.h> #include <asm/time.h> #include <asm/machdep.h> +#include <asm/cputhreads.h> #include <asm/cputable.h> #include <asm/system.h> #include <asm/mpic.h> @@ -62,10 +63,12 @@ struct thread_info *secondary_ti; cpumask_t cpu_possible_map = CPU_MASK_NONE; cpumask_t cpu_online_map = CPU_MASK_NONE; DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE; +DEFINE_PER_CPU(cpumask_t, cpu_core_map) = CPU_MASK_NONE; EXPORT_SYMBOL(cpu_online_map); EXPORT_SYMBOL(cpu_possible_map); EXPORT_PER_CPU_SYMBOL(cpu_sibling_map); +EXPORT_PER_CPU_SYMBOL(cpu_core_map); /* SMP operations for this machine */ struct smp_ops_t *smp_ops; @@ -228,6 +231,8 @@ void __devinit smp_prepare_boot_cpu(void) BUG_ON(smp_processor_id() != boot_cpuid); cpu_set(boot_cpuid, cpu_online_map); + cpu_set(boot_cpuid, per_cpu(cpu_sibling_map, boot_cpuid)); + cpu_set(boot_cpuid, per_cpu(cpu_core_map, boot_cpuid)); #ifdef CONFIG_PPC64 paca[boot_cpuid].__current = current; #endif @@ -375,11 +380,60 @@ int __cpuinit __cpu_up(unsigned int cpu) return 0; } +/* Return the value of the reg property corresponding to the given + * logical cpu. + */ +int cpu_to_core_id(int cpu) +{ + struct device_node *np; + const int *reg; + int id = -1; + + np = of_get_cpu_node(cpu, NULL); + if (!np) + goto out; + + reg = of_get_property(np, "reg", NULL); + if (!reg) + goto out; + + id = *reg; +out: + of_node_put(np); + return id; +} + +/* Must be called when no change can occur to cpu_present_map, + * i.e. during cpu online or offline. + */ +static struct device_node *cpu_to_l2cache(int cpu) +{ + struct device_node *np; + const phandle *php; + phandle ph; + + if (!cpu_present(cpu)) + return NULL; + + np = of_get_cpu_node(cpu, NULL); + if (np == NULL) + return NULL; + + php = of_get_property(np, "l2-cache", NULL); + if (php == NULL) + return NULL; + ph = *php; + of_node_put(np); + + return of_find_node_by_phandle(ph); +} /* Activate a secondary processor. */ int __devinit start_secondary(void *unused) { unsigned int cpu = smp_processor_id(); + struct device_node *l2_cache; + int i, base; atomic_inc(&init_mm.mm_count); current->active_mm = &init_mm; @@ -400,6 +454,33 @@ int __devinit start_secondary(void *unused) ipi_call_lock(); cpu_set(cpu, cpu_online_map); + /* Update sibling maps */ + base = cpu_first_thread_in_core(cpu); + for (i = 0; i < threads_per_core; i++) { + if (cpu_is_offline(base + i)) + continue; + cpu_set(cpu, per_cpu(cpu_sibling_map, base + i)); + cpu_set(base + i, per_cpu(cpu_sibling_map, cpu)); + + /* cpu_core_map should be a superset of + * cpu_sibling_map even if we don't have cache + * information, so update the former here, too. + */ + cpu_set(cpu, per_cpu(cpu_core_map, base +i)); + cpu_set(base + i, per_cpu(cpu_core_map, cpu)); + } + l2_cache = cpu_to_l2cache(cpu); + for_each_online_cpu(i) { + struct device_node *np = cpu_to_l2cache(i); + if (!np) + continue; + if (np == l2_cache) { + cpu_set(cpu, per_cpu(cpu_core_map, i)); + cpu_set(i, per_cpu(cpu_core_map, cpu)); + } + of_node_put(np); + } + of_node_put(l2_cache); ipi_call_unlock(); local_irq_enable(); @@ -437,10 +518,42 @@ void __init smp_cpus_done(unsigned int max_cpus) #ifdef CONFIG_HOTPLUG_CPU int __cpu_disable(void) { - if (smp_ops->cpu_disable) - return smp_ops->cpu_disable(); + struct device_node *l2_cache; + int cpu = smp_processor_id(); + int base, i; + int err; - return -ENOSYS; + if (!smp_ops->cpu_disable) + return -ENOSYS; + + err = smp_ops->cpu_disable(); + if (err) + return err; + + /* Update sibling maps */ + base = cpu_first_thread_in_core(cpu); + for (i = 0; i < threads_per_core; i++) { + cpu_clear(cpu, per_cpu(cpu_sibling_map, base + i)); + cpu_clear(base + i, per_cpu(cpu_sibling_map, cpu)); + cpu_clear(cpu, per_cpu(cpu_core_map, base +i)); + cpu_clear(base + i, per_cpu(cpu_core_map, cpu)); + } + + l2_cache = cpu_to_l2cache(cpu); + for_each_present_cpu(i) { + struct device_node *np = cpu_to_l2cache(i); + if (!np) + continue; + if (np == l2_cache) { + cpu_clear(cpu, per_cpu(cpu_core_map, i)); + cpu_clear(i, per_cpu(cpu_core_map, cpu)); + } + of_node_put(np); + } + of_node_put(l2_cache); + + + return 0; } void __cpu_die(unsigned int cpu) diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c index f2589645870..b0dbb1daa4d 100644 --- a/arch/powerpc/kernel/stacktrace.c +++ b/arch/powerpc/kernel/stacktrace.c @@ -13,7 +13,6 @@ #include <linux/module.h> #include <linux/sched.h> #include <linux/stacktrace.h> -#include <linux/module.h> #include <asm/ptrace.h> #include <asm/processor.h> diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 800e5e9a087..56d172d16e5 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -22,6 +22,8 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices); +static DEFINE_PER_CPU(struct kobject *, cache_toplevel); + /* SMT stuff */ #ifdef CONFIG_PPC_MULTIPLATFORM @@ -297,8 +299,289 @@ static struct sysdev_attribute pa6t_attrs[] = { #endif /* CONFIG_DEBUG_KERNEL */ }; +struct cache_desc { + struct kobject kobj; + struct cache_desc *next; + const char *type; /* Instruction, Data, or Unified */ + u32 size; /* total cache size in KB */ + u32 line_size; /* in bytes */ + u32 nr_sets; /* number of sets */ + u32 level; /* e.g. 1, 2, 3... */ + u32 associativity; /* e.g. 8-way... 0 is fully associative */ +}; + +DEFINE_PER_CPU(struct cache_desc *, cache_desc); + +static struct cache_desc *kobj_to_cache_desc(struct kobject *k) +{ + return container_of(k, struct cache_desc, kobj); +} + +static void cache_desc_release(struct kobject *k) +{ + struct cache_desc *desc = kobj_to_cache_desc(k); + + pr_debug("%s: releasing %s\n", __func__, kobject_name(k)); + + if (desc->next) + kobject_put(&desc->next->kobj); + + kfree(kobj_to_cache_desc(k)); +} + +static ssize_t cache_desc_show(struct kobject *k, struct attribute *attr, char *buf) +{ + struct kobj_attribute *kobj_attr; + + kobj_attr = container_of(attr, struct kobj_attribute, attr); + + return kobj_attr->show(k, kobj_attr, buf); +} + +static struct sysfs_ops cache_desc_sysfs_ops = { + .show = cache_desc_show, +}; + +static struct kobj_type cache_desc_type = { + .release = cache_desc_release, + .sysfs_ops = &cache_desc_sysfs_ops, +}; + +static ssize_t cache_size_show(struct kobject *k, struct kobj_attribute *attr, char *buf) +{ + struct cache_desc *cache = kobj_to_cache_desc(k); + + return sprintf(buf, "%uK\n", cache->size); +} + +static struct kobj_attribute cache_size_attr = + __ATTR(size, 0444, cache_size_show, NULL); + +static ssize_t cache_line_size_show(struct kobject *k, struct kobj_attribute *attr, char *buf) +{ + struct cache_desc *cache = kobj_to_cache_desc(k); + + return sprintf(buf, "%u\n", cache->line_size); +} + +static struct kobj_attribute cache_line_size_attr = + __ATTR(coherency_line_size, 0444, cache_line_size_show, NULL); + +static ssize_t cache_nr_sets_show(struct kobject *k, struct kobj_attribute *attr, char *buf) +{ + struct cache_desc *cache = kobj_to_cache_desc(k); + + return sprintf(buf, "%u\n", cache->nr_sets); +} + +static struct kobj_attribute cache_nr_sets_attr = + __ATTR(number_of_sets, 0444, cache_nr_sets_show, NULL); + +static ssize_t cache_type_show(struct kobject *k, struct kobj_attribute *attr, char *buf) +{ + struct cache_desc *cache = kobj_to_cache_desc(k); + + return sprintf(buf, "%s\n", cache->type); +} + +static struct kobj_attribute cache_type_attr = + __ATTR(type, 0444, cache_type_show, NULL); + +static ssize_t cache_level_show(struct kobject *k, struct kobj_attribute *attr, char *buf) +{ + struct cache_desc *cache = kobj_to_cache_desc(k); + + return sprintf(buf, "%u\n", cache->level); +} + +static struct kobj_attribute cache_level_attr = + __ATTR(level, 0444, cache_level_show, NULL); + +static ssize_t cache_assoc_show(struct kobject *k, struct kobj_attribute *attr, char *buf) +{ + struct cache_desc *cache = kobj_to_cache_desc(k); + + return sprintf(buf, "%u\n", cache->associativity); +} + +static struct kobj_attribute cache_assoc_attr = + __ATTR(ways_of_associativity, 0444, cache_assoc_show, NULL); + +struct cache_desc_info { + const char *type; + const char *size_prop; + const char *line_size_prop; + const char *nr_sets_prop; +}; + +/* PowerPC Processor binding says the [di]-cache-* must be equal on + * unified caches, so just use d-cache properties. */ +static struct cache_desc_info ucache_info = { + .type = "Unified", + .size_prop = "d-cache-size", + .line_size_prop = "d-cache-line-size", + .nr_sets_prop = "d-cache-sets", +}; -static void register_cpu_online(unsigned int cpu) +static struct cache_desc_info dcache_info = { + .type = "Data", + .size_prop = "d-cache-size", + .line_size_prop = "d-cache-line-size", + .nr_sets_prop = "d-cache-sets", +}; + +static struct cache_desc_info icache_info = { + .type = "Instruction", + .size_prop = "i-cache-size", + .line_size_prop = "i-cache-line-size", + .nr_sets_prop = "i-cache-sets", +}; + +static struct cache_desc * __cpuinit create_cache_desc(struct device_node *np, struct kobject *parent, int index, int level, struct cache_desc_info *info) +{ + const u32 *cache_line_size; + struct cache_desc *new; + const u32 *cache_size; + const u32 *nr_sets; + int rc; + + new = kzalloc(sizeof(*new), GFP_KERNEL); + if (!new) + return NULL; + + rc = kobject_init_and_add(&new->kobj, &cache_desc_type, parent, + "index%d", index); + if (rc) + goto err; + + /* type */ + new->type = info->type; + rc = sysfs_create_file(&new->kobj, &cache_type_attr.attr); + WARN_ON(rc); + + /* level */ + new->level = level; + rc = sysfs_create_file(&new->kobj, &cache_level_attr.attr); + WARN_ON(rc); + + /* size */ + cache_size = of_get_property(np, info->size_prop, NULL); + if (cache_size) { + new->size = *cache_size / 1024; + rc = sysfs_create_file(&new->kobj, + &cache_size_attr.attr); + WARN_ON(rc); + } + + /* coherency_line_size */ + cache_line_size = of_get_property(np, info->line_size_prop, NULL); + if (cache_line_size) { + new->line_size = *cache_line_size; + rc = sysfs_create_file(&new->kobj, + &cache_line_size_attr.attr); + WARN_ON(rc); + } + + /* number_of_sets */ + nr_sets = of_get_property(np, info->nr_sets_prop, NULL); + if (nr_sets) { + new->nr_sets = *nr_sets; + rc = sysfs_create_file(&new->kobj, + &cache_nr_sets_attr.attr); + WARN_ON(rc); + } + + /* ways_of_associativity */ + if (new->nr_sets == 1) { + /* fully associative */ + new->associativity = 0; + goto create_assoc; + } + + if (new->nr_sets && new->size && new->line_size) { + /* If we have values for all of these we can derive + * the associativity. */ + new->associativity = + ((new->size * 1024) / new->nr_sets) / new->line_size; +create_assoc: + rc = sysfs_create_file(&new->kobj, + &cache_assoc_attr.attr); + WARN_ON(rc); + } + + return new; +err: + kfree(new); + return NULL; +} + +static bool cache_is_unified(struct device_node *np) +{ + return of_get_property(np, "cache-unified", NULL); +} + +static struct cache_desc * __cpuinit create_cache_index_info(struct device_node *np, struct kobject *parent, int index, int level) +{ + const phandle *next_cache_phandle; + struct device_node *next_cache; + struct cache_desc *new, **end; + + pr_debug("%s(node = %s, index = %d)\n", __func__, np->full_name, index); + + if (cache_is_unified(np)) { + new = create_cache_desc(np, parent, index, level, + &ucache_info); + } else { + new = create_cache_desc(np, parent, index, level, + &dcache_info); + if (new) { + index++; + new->next = create_cache_desc(np, parent, index, level, + &icache_info); + } + } + if (!new) + return NULL; + + end = &new->next; + while (*end) + end = &(*end)->next; + + next_cache_phandle = of_get_property(np, "l2-cache", NULL); + if (!next_cache_phandle) + goto out; + + next_cache = of_find_node_by_phandle(*next_cache_phandle); + if (!next_cache) + goto out; + + *end = create_cache_index_info(next_cache, parent, ++index, ++level); + + of_node_put(next_cache); +out: + return new; +} + +static void __cpuinit create_cache_info(struct sys_device *sysdev) +{ + struct kobject *cache_toplevel; + struct device_node *np = NULL; + int cpu = sysdev->id; + + cache_toplevel = kobject_create_and_add("cache", &sysdev->kobj); + if (!cache_toplevel) + return; + per_cpu(cache_toplevel, cpu) = cache_toplevel; + np = of_get_cpu_node(cpu, NULL); + if (np != NULL) { + per_cpu(cache_desc, cpu) = + create_cache_index_info(np, cache_toplevel, 0, 1); + of_node_put(np); + } + return; +} + +static void __cpuinit register_cpu_online(unsigned int cpu) { struct cpu *c = &per_cpu(cpu_devices, cpu); struct sys_device *s = &c->sysdev; @@ -346,9 +629,33 @@ static void register_cpu_online(unsigned int cpu) if (cpu_has_feature(CPU_FTR_DSCR)) sysdev_create_file(s, &attr_dscr); + + create_cache_info(s); } #ifdef CONFIG_HOTPLUG_CPU +static void remove_cache_info(struct sys_device *sysdev) +{ + struct kobject *cache_toplevel; + struct cache_desc *cache_desc; + int cpu = sysdev->id; + + cache_desc = per_cpu(cache_desc, cpu); + if (cache_desc != NULL) { + sysfs_remove_file(&cache_desc->kobj, &cache_size_attr.attr); + sysfs_remove_file(&cache_desc->kobj, &cache_line_size_attr.attr); + sysfs_remove_file(&cache_desc->kobj, &cache_type_attr.attr); + sysfs_remove_file(&cache_desc->kobj, &cache_level_attr.attr); + sysfs_remove_file(&cache_desc->kobj, &cache_nr_sets_attr.attr); + sysfs_remove_file(&cache_desc->kobj, &cache_assoc_attr.attr); + + kobject_put(&cache_desc->kobj); + } + cache_toplevel = per_cpu(cache_toplevel, cpu); + if (cache_toplevel != NULL) + kobject_put(cache_toplevel); +} + static void unregister_cpu_online(unsigned int cpu) { struct cpu *c = &per_cpu(cpu_devices, cpu); @@ -399,6 +706,8 @@ static void unregister_cpu_online(unsigned int cpu) if (cpu_has_feature(CPU_FTR_DSCR)) sysdev_remove_file(s, &attr_dscr); + + remove_cache_info(s); } #endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index ade8aeaa2e7..22a3c33fd75 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -530,7 +530,7 @@ static dma_addr_t vio_dma_iommu_map_single(struct device *dev, void *vaddr, } ret = dma_iommu_ops.map_single(dev, vaddr, size, direction, attrs); - if (unlikely(dma_mapping_error(ret))) { + if (unlikely(dma_mapping_error(dev, ret))) { vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE)); atomic_inc(&viodev->cmo.allocs_failed); } @@ -1031,8 +1031,8 @@ void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired) {} static int vio_cmo_bus_probe(struct vio_dev *viodev) { return 0; } static void vio_cmo_bus_remove(struct vio_dev *viodev) {} static void vio_cmo_set_dma_ops(struct vio_dev *viodev) {} -static void vio_cmo_bus_init() {} -static void vio_cmo_sysfs_init() { } +static void vio_cmo_bus_init(void) {} +static void vio_cmo_sysfs_init(void) { } #endif /* CONFIG_PPC_SMLPAR */ EXPORT_SYMBOL(vio_cmo_entitlement_update); EXPORT_SYMBOL(vio_cmo_set_dev_desired); diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c index 75dff7cfa81..5a5602da509 100644 --- a/arch/powerpc/kvm/44x_tlb.c +++ b/arch/powerpc/kvm/44x_tlb.c @@ -177,7 +177,8 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid, vcpu->arch.msr & MSR_PR); } -void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid) +void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr, + gva_t eend, u32 asid) { unsigned int pid = asid & 0xff; int i; @@ -191,7 +192,7 @@ void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid) if (!get_tlb_v(stlbe)) continue; - if (eaddr < get_tlb_eaddr(stlbe)) + if (eend < get_tlb_eaddr(stlbe)) continue; if (eaddr > get_tlb_end(stlbe)) diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c index 00009746128..8c605d0a548 100644 --- a/arch/powerpc/kvm/emulate.c +++ b/arch/powerpc/kvm/emulate.c @@ -137,7 +137,7 @@ static int kvmppc_emul_tlbwe(struct kvm_vcpu *vcpu, u32 inst) if (tlbe->word0 & PPC44x_TLB_VALID) { eaddr = get_tlb_eaddr(tlbe); asid = (tlbe->word0 & PPC44x_TLB_TS) | tlbe->tid; - kvmppc_mmu_invalidate(vcpu, eaddr, asid); + kvmppc_mmu_invalidate(vcpu, eaddr, get_tlb_end(tlbe), asid); } switch (ws) { diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index fb42c4dd321..f1c2d55b437 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -113,7 +113,7 @@ static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr, static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, unsigned long address, unsigned int psize) { - pte_t *new = kmem_cache_alloc(huge_pgtable_cache(psize), + pte_t *new = kmem_cache_zalloc(huge_pgtable_cache(psize), GFP_KERNEL|__GFP_REPEAT); if (! new) @@ -730,25 +730,27 @@ static int __init hugepage_setup_sz(char *str) } __setup("hugepagesz=", hugepage_setup_sz); -static void zero_ctor(struct kmem_cache *cache, void *addr) -{ - memset(addr, 0, kmem_cache_size(cache)); -} - static int __init hugetlbpage_init(void) { unsigned int psize; if (!cpu_has_feature(CPU_FTR_16M_PAGE)) return -ENODEV; + /* Add supported huge page sizes. Need to change HUGE_MAX_HSTATE * and adjust PTE_NONCACHE_NUM if the number of supported huge page * sizes changes. */ set_huge_psize(MMU_PAGE_16M); - set_huge_psize(MMU_PAGE_64K); set_huge_psize(MMU_PAGE_16G); + /* Temporarily disable support for 64K huge pages when 64K SPU local + * store support is enabled as the current implementation conflicts. + */ +#ifndef CONFIG_SPU_FS_64K_LS + set_huge_psize(MMU_PAGE_64K); +#endif + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { if (mmu_huge_psizes[psize]) { huge_pgtable_cache(psize) = kmem_cache_create( @@ -756,7 +758,7 @@ static int __init hugetlbpage_init(void) HUGEPTE_TABLE_SIZE(psize), HUGEPTE_TABLE_SIZE(psize), 0, - zero_ctor); + NULL); if (!huge_pgtable_cache(psize)) panic("hugetlbpage_init(): could not create %s"\ "\n", HUGEPTE_CACHE_NAME(psize)); diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index a41bc5aa204..4f7df85129d 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -136,9 +136,14 @@ static int __init setup_kcore(void) module_init(setup_kcore); #endif -static void zero_ctor(struct kmem_cache *cache, void *addr) +static void pgd_ctor(void *addr) { - memset(addr, 0, kmem_cache_size(cache)); + memset(addr, 0, PGD_TABLE_SIZE); +} + +static void pmd_ctor(void *addr) +{ + memset(addr, 0, PMD_TABLE_SIZE); } static const unsigned int pgtable_cache_size[2] = { @@ -163,19 +168,8 @@ struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)]; void pgtable_cache_init(void) { - int i; - - for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) { - int size = pgtable_cache_size[i]; - const char *name = pgtable_cache_name[i]; - - pr_debug("Allocating page table cache %s (#%d) " - "for size: %08x...\n", name, i, size); - pgtable_cache[i] = kmem_cache_create(name, - size, size, - SLAB_PANIC, - zero_ctor); - } + pgtable_cache[0] = kmem_cache_create(pgtable_cache_name[0], PGD_TABLE_SIZE, PGD_TABLE_SIZE, SLAB_PANIC, pgd_ctor); + pgtable_cache[1] = kmem_cache_create(pgtable_cache_name[1], PMD_TABLE_SIZE, PMD_TABLE_SIZE, SLAB_PANIC, pmd_ctor); } #ifdef CONFIG_SPARSEMEM_VMEMMAP diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 1ca2235f096..702691cb9e8 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -186,45 +186,6 @@ walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg, } EXPORT_SYMBOL_GPL(walk_memory_resource); -void show_mem(void) -{ - unsigned long total = 0, reserved = 0; - unsigned long shared = 0, cached = 0; - unsigned long highmem = 0; - struct page *page; - pg_data_t *pgdat; - unsigned long i; - - printk("Mem-info:\n"); - show_free_areas(); - for_each_online_pgdat(pgdat) { - unsigned long flags; - pgdat_resize_lock(pgdat, &flags); - for (i = 0; i < pgdat->node_spanned_pages; i++) { - if (!pfn_valid(pgdat->node_start_pfn + i)) - continue; - page = pgdat_page_nr(pgdat, i); - total++; - if (PageHighMem(page)) - highmem++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - pgdat_resize_unlock(pgdat, &flags); - } - printk("%ld pages of RAM\n", total); -#ifdef CONFIG_HIGHMEM - printk("%ld pages of HIGHMEM\n", highmem); -#endif - printk("%ld reserved pages\n", reserved); - printk("%ld pages shared\n", shared); - printk("%ld pages swap cached\n", cached); -} - /* * Initialize the bootmem system and give it all the memory we * have available. If we are using highmem, we only put the diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c index 0e04f8fb152..3e7e0f1568e 100644 --- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c +++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c @@ -281,7 +281,7 @@ static int __init scc_pciex_iowa_init(struct iowa_bus *bus, void *data) dummy_page_da = dma_map_single(bus->phb->parent, dummy_page_va, PAGE_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(dummy_page_da)) { + if (dma_mapping_error(bus->phb->parent, dummy_page_da)) { pr_err("PCIEX:Map dummy page failed.\n"); kfree(dummy_page_va); return -1; diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c index 418b605ac35..5122ec14527 100644 --- a/arch/powerpc/platforms/cell/spider-pci.c +++ b/arch/powerpc/platforms/cell/spider-pci.c @@ -111,7 +111,7 @@ static int __init spiderpci_pci_setup_chip(struct pci_controller *phb, dummy_page_da = dma_map_single(phb->parent, dummy_page_va, PAGE_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(dummy_page_da)) { + if (dma_mapping_error(phb->parent, dummy_page_da)) { pr_err("SPIDER-IOWA:Map dummy page filed.\n"); kfree(dummy_page_va); return -1; diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 7123472801d..690ca7b0dcf 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -78,7 +78,7 @@ spufs_destroy_inode(struct inode *inode) } static void -spufs_init_once(struct kmem_cache *cachep, void *p) +spufs_init_once(void *p) { struct spufs_inode_info *ei = p; diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index 1dc7295746d..731d7b15774 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -871,7 +871,7 @@ static int proc_mf_dump_cmdline(char *page, char **start, off_t off, count = 256 - off; dma_addr = iseries_hv_map(page, off + count, DMA_FROM_DEVICE); - if (dma_mapping_error(dma_addr)) + if (dma_mapping_error(NULL, dma_addr)) return -ENOMEM; memset(page, 0, off + count); memset(&vsp_cmd, 0, sizeof(vsp_cmd)); diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 31635446901..88ccf3a08a9 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -541,6 +541,78 @@ static int __init pmac_declare_of_platform_devices(void) } machine_device_initcall(powermac, pmac_declare_of_platform_devices); +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE +/* + * This is called very early, as part of console_init() (typically just after + * time_init()). This function is respondible for trying to find a good + * default console on serial ports. It tries to match the open firmware + * default output with one of the available serial console drivers. + */ +static int __init check_pmac_serial_console(void) +{ + struct device_node *prom_stdout = NULL; + int offset = 0; + const char *name; +#ifdef CONFIG_SERIAL_PMACZILOG_TTYS + char *devname = "ttyS"; +#else + char *devname = "ttyPZ"; +#endif + + pr_debug(" -> check_pmac_serial_console()\n"); + + /* The user has requested a console so this is already set up. */ + if (strstr(boot_command_line, "console=")) { + pr_debug(" console was specified !\n"); + return -EBUSY; + } + + if (!of_chosen) { + pr_debug(" of_chosen is NULL !\n"); + return -ENODEV; + } + + /* We are getting a weird phandle from OF ... */ + /* ... So use the full path instead */ + name = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (name == NULL) { + pr_debug(" no linux,stdout-path !\n"); + return -ENODEV; + } + prom_stdout = of_find_node_by_path(name); + if (!prom_stdout) { + pr_debug(" can't find stdout package %s !\n", name); + return -ENODEV; + } + pr_debug("stdout is %s\n", prom_stdout->full_name); + + name = of_get_property(prom_stdout, "name", NULL); + if (!name) { + pr_debug(" stdout package has no name !\n"); + goto not_found; + } + + if (strcmp(name, "ch-a") == 0) + offset = 0; + else if (strcmp(name, "ch-b") == 0) + offset = 1; + else + goto not_found; + of_node_put(prom_stdout); + + pr_debug("Found serial console at %s%d\n", devname, offset); + + return add_preferred_console(devname, offset, NULL); + + not_found: + pr_debug("No preferred console found !\n"); + of_node_put(prom_stdout); + return -ENODEV; +} +console_initcall(check_pmac_serial_console); + +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + /* * Called very early, MMU is off, device-tree isn't unflattened */ diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c index 47de4d3fc16..572771fd846 100644 --- a/arch/powerpc/platforms/powermac/udbg_scc.c +++ b/arch/powerpc/platforms/powermac/udbg_scc.c @@ -125,13 +125,23 @@ void udbg_scc_init(int force_scc) out_8(sccc, 0xc0); /* If SCC was the OF output port, read the BRG value, else - * Setup for 57600 8N1 + * Setup for 38400 or 57600 8N1 depending on the machine */ if (ch_def != NULL) { out_8(sccc, 13); scc_inittab[1] = in_8(sccc); out_8(sccc, 12); scc_inittab[3] = in_8(sccc); + } else if (machine_is_compatible("RackMac1,1") + || machine_is_compatible("RackMac1,2") + || machine_is_compatible("MacRISC4")) { + /* Xserves and G5s default to 57600 */ + scc_inittab[1] = 0; + scc_inittab[3] = 0; + } else { + /* Others default to 38400 */ + scc_inittab[1] = 0; + scc_inittab[3] = 1; } for (i = 0; i < sizeof(scc_inittab); ++i) diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c index c6b3be03168..38fe32a7cc7 100644 --- a/arch/powerpc/platforms/pseries/cmm.c +++ b/arch/powerpc/platforms/pseries/cmm.c @@ -289,7 +289,9 @@ static int cmm_thread(void *dummy) } #define CMM_SHOW(name, format, args...) \ - static ssize_t show_##name(struct sys_device *dev, char *buf) \ + static ssize_t show_##name(struct sys_device *dev, \ + struct sysdev_attribute *attr, \ + char *buf) \ { \ return sprintf(buf, format, ##args); \ } \ @@ -298,12 +300,14 @@ static int cmm_thread(void *dummy) CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(loaned_pages)); CMM_SHOW(loaned_target_kb, "%lu\n", PAGES2KB(loaned_pages_target)); -static ssize_t show_oom_pages(struct sys_device *dev, char *buf) +static ssize_t show_oom_pages(struct sys_device *dev, + struct sysdev_attribute *attr, char *buf) { return sprintf(buf, "%lu\n", PAGES2KB(oom_freed_pages)); } static ssize_t store_oom_pages(struct sys_device *dev, + struct sysdev_attribute *attr, const char *buf, size_t count) { unsigned long val = simple_strtoul (buf, NULL, 10); diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c index 4f82e5b5f87..569079ec4ff 100644 --- a/arch/s390/kernel/kprobes.c +++ b/arch/s390/kernel/kprobes.c @@ -197,7 +197,7 @@ void __kprobes arch_arm_kprobe(struct kprobe *p) args.new = BREAKPOINT_INSTRUCTION; kcb->kprobe_status = KPROBE_SWAP_INST; - stop_machine_run(swap_instruction, &args, NR_CPUS); + stop_machine(swap_instruction, &args, NULL); kcb->kprobe_status = status; } @@ -212,7 +212,7 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p) args.new = p->opcode; kcb->kprobe_status = KPROBE_SWAP_INST; - stop_machine_run(swap_instruction, &args, NR_CPUS); + stop_machine(swap_instruction, &args, NULL); kcb->kprobe_status = status; } @@ -331,7 +331,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) * No kprobe at this address. The fault has not been * caused by a kprobe breakpoint. The race of breakpoint * vs. kprobe remove does not exist because on s390 we - * use stop_machine_run to arm/disarm the breakpoints. + * use stop_machine to arm/disarm the breakpoints. */ goto no_kprobe; diff --git a/arch/s390/kvm/gaccess.h b/arch/s390/kvm/gaccess.h index 4e0633c413f..ed60f3a74a8 100644 --- a/arch/s390/kvm/gaccess.h +++ b/arch/s390/kvm/gaccess.h @@ -18,11 +18,11 @@ #include <asm/uaccess.h> static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu, - u64 guestaddr) + unsigned long guestaddr) { - u64 prefix = vcpu->arch.sie_block->prefix; - u64 origin = vcpu->kvm->arch.guest_origin; - u64 memsize = vcpu->kvm->arch.guest_memsize; + unsigned long prefix = vcpu->arch.sie_block->prefix; + unsigned long origin = vcpu->kvm->arch.guest_origin; + unsigned long memsize = vcpu->kvm->arch.guest_memsize; if (guestaddr < 2 * PAGE_SIZE) guestaddr += prefix; @@ -37,7 +37,7 @@ static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu, return (void __user *) guestaddr; } -static inline int get_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr, +static inline int get_guest_u64(struct kvm_vcpu *vcpu, unsigned long guestaddr, u64 *result) { void __user *uptr = __guestaddr_to_user(vcpu, guestaddr); @@ -47,10 +47,10 @@ static inline int get_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr, if (IS_ERR((void __force *) uptr)) return PTR_ERR((void __force *) uptr); - return get_user(*result, (u64 __user *) uptr); + return get_user(*result, (unsigned long __user *) uptr); } -static inline int get_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr, +static inline int get_guest_u32(struct kvm_vcpu *vcpu, unsigned long guestaddr, u32 *result) { void __user *uptr = __guestaddr_to_user(vcpu, guestaddr); @@ -63,7 +63,7 @@ static inline int get_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr, return get_user(*result, (u32 __user *) uptr); } -static inline int get_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr, +static inline int get_guest_u16(struct kvm_vcpu *vcpu, unsigned long guestaddr, u16 *result) { void __user *uptr = __guestaddr_to_user(vcpu, guestaddr); @@ -76,7 +76,7 @@ static inline int get_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr, return get_user(*result, (u16 __user *) uptr); } -static inline int get_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr, +static inline int get_guest_u8(struct kvm_vcpu *vcpu, unsigned long guestaddr, u8 *result) { void __user *uptr = __guestaddr_to_user(vcpu, guestaddr); @@ -87,7 +87,7 @@ static inline int get_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr, return get_user(*result, (u8 __user *) uptr); } -static inline int put_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr, +static inline int put_guest_u64(struct kvm_vcpu *vcpu, unsigned long guestaddr, u64 value) { void __user *uptr = __guestaddr_to_user(vcpu, guestaddr); @@ -100,7 +100,7 @@ static inline int put_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr, return put_user(value, (u64 __user *) uptr); } -static inline int put_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr, +static inline int put_guest_u32(struct kvm_vcpu *vcpu, unsigned long guestaddr, u32 value) { void __user *uptr = __guestaddr_to_user(vcpu, guestaddr); @@ -113,7 +113,7 @@ static inline int put_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr, return put_user(value, (u32 __user *) uptr); } -static inline int put_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr, +static inline int put_guest_u16(struct kvm_vcpu *vcpu, unsigned long guestaddr, u16 value) { void __user *uptr = __guestaddr_to_user(vcpu, guestaddr); @@ -126,7 +126,7 @@ static inline int put_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr, return put_user(value, (u16 __user *) uptr); } -static inline int put_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr, +static inline int put_guest_u8(struct kvm_vcpu *vcpu, unsigned long guestaddr, u8 value) { void __user *uptr = __guestaddr_to_user(vcpu, guestaddr); @@ -138,7 +138,8 @@ static inline int put_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr, } -static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu, u64 guestdest, +static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu, + unsigned long guestdest, const void *from, unsigned long n) { int rc; @@ -153,12 +154,12 @@ static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu, u64 guestdest, return 0; } -static inline int copy_to_guest(struct kvm_vcpu *vcpu, u64 guestdest, +static inline int copy_to_guest(struct kvm_vcpu *vcpu, unsigned long guestdest, const void *from, unsigned long n) { - u64 prefix = vcpu->arch.sie_block->prefix; - u64 origin = vcpu->kvm->arch.guest_origin; - u64 memsize = vcpu->kvm->arch.guest_memsize; + unsigned long prefix = vcpu->arch.sie_block->prefix; + unsigned long origin = vcpu->kvm->arch.guest_origin; + unsigned long memsize = vcpu->kvm->arch.guest_memsize; if ((guestdest < 2 * PAGE_SIZE) && (guestdest + n > 2 * PAGE_SIZE)) goto slowpath; @@ -189,7 +190,8 @@ slowpath: } static inline int __copy_from_guest_slow(struct kvm_vcpu *vcpu, void *to, - u64 guestsrc, unsigned long n) + unsigned long guestsrc, + unsigned long n) { int rc; unsigned long i; @@ -204,11 +206,11 @@ static inline int __copy_from_guest_slow(struct kvm_vcpu *vcpu, void *to, } static inline int copy_from_guest(struct kvm_vcpu *vcpu, void *to, - u64 guestsrc, unsigned long n) + unsigned long guestsrc, unsigned long n) { - u64 prefix = vcpu->arch.sie_block->prefix; - u64 origin = vcpu->kvm->arch.guest_origin; - u64 memsize = vcpu->kvm->arch.guest_memsize; + unsigned long prefix = vcpu->arch.sie_block->prefix; + unsigned long origin = vcpu->kvm->arch.guest_origin; + unsigned long memsize = vcpu->kvm->arch.guest_memsize; if ((guestsrc < 2 * PAGE_SIZE) && (guestsrc + n > 2 * PAGE_SIZE)) goto slowpath; @@ -238,11 +240,12 @@ slowpath: return __copy_from_guest_slow(vcpu, to, guestsrc, n); } -static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu, u64 guestdest, +static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu, + unsigned long guestdest, const void *from, unsigned long n) { - u64 origin = vcpu->kvm->arch.guest_origin; - u64 memsize = vcpu->kvm->arch.guest_memsize; + unsigned long origin = vcpu->kvm->arch.guest_origin; + unsigned long memsize = vcpu->kvm->arch.guest_memsize; if (guestdest + n > memsize) return -EFAULT; @@ -256,10 +259,11 @@ static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu, u64 guestdest, } static inline int copy_from_guest_absolute(struct kvm_vcpu *vcpu, void *to, - u64 guestsrc, unsigned long n) + unsigned long guestsrc, + unsigned long n) { - u64 origin = vcpu->kvm->arch.guest_origin; - u64 memsize = vcpu->kvm->arch.guest_memsize; + unsigned long origin = vcpu->kvm->arch.guest_origin; + unsigned long memsize = vcpu->kvm->arch.guest_memsize; if (guestsrc + n > memsize) return -EFAULT; diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c index 47a0b642174..61236102203 100644 --- a/arch/s390/kvm/intercept.c +++ b/arch/s390/kvm/intercept.c @@ -20,7 +20,7 @@ #include "kvm-s390.h" #include "gaccess.h" -static int handle_lctg(struct kvm_vcpu *vcpu) +static int handle_lctlg(struct kvm_vcpu *vcpu) { int reg1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4; int reg3 = vcpu->arch.sie_block->ipa & 0x000f; @@ -30,7 +30,7 @@ static int handle_lctg(struct kvm_vcpu *vcpu) u64 useraddr; int reg, rc; - vcpu->stat.instruction_lctg++; + vcpu->stat.instruction_lctlg++; if ((vcpu->arch.sie_block->ipb & 0xff) != 0x2f) return -ENOTSUPP; @@ -38,9 +38,12 @@ static int handle_lctg(struct kvm_vcpu *vcpu) if (base2) useraddr += vcpu->arch.guest_gprs[base2]; + if (useraddr & 7) + return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); + reg = reg1; - VCPU_EVENT(vcpu, 5, "lctg r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2, + VCPU_EVENT(vcpu, 5, "lctlg r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2, disp2); do { @@ -74,6 +77,9 @@ static int handle_lctl(struct kvm_vcpu *vcpu) if (base2) useraddr += vcpu->arch.guest_gprs[base2]; + if (useraddr & 3) + return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); + VCPU_EVENT(vcpu, 5, "lctl r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2, disp2); @@ -99,7 +105,7 @@ static intercept_handler_t instruction_handlers[256] = { [0xae] = kvm_s390_handle_sigp, [0xb2] = kvm_s390_handle_priv, [0xb7] = handle_lctl, - [0xeb] = handle_lctg, + [0xeb] = handle_lctlg, }; static int handle_noop(struct kvm_vcpu *vcpu) diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index 11230b0db95..2960702b482 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -13,6 +13,7 @@ #include <asm/lowcore.h> #include <asm/uaccess.h> #include <linux/kvm_host.h> +#include <linux/signal.h> #include "kvm-s390.h" #include "gaccess.h" @@ -246,15 +247,10 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu, default: BUG(); } - if (exception) { - VCPU_EVENT(vcpu, 1, "%s", "program exception while delivering" - " interrupt"); - kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); - if (inti->type == KVM_S390_PROGRAM_INT) { - printk(KERN_WARNING "kvm: recursive program check\n"); - BUG(); - } + printk("kvm: The guest lowcore is not mapped during interrupt " + "delivery, killing userspace\n"); + do_exit(SIGKILL); } } @@ -277,14 +273,11 @@ static int __try_deliver_ckc_interrupt(struct kvm_vcpu *vcpu) __LC_EXT_NEW_PSW, sizeof(psw_t)); if (rc == -EFAULT) exception = 1; - if (exception) { - VCPU_EVENT(vcpu, 1, "%s", "program exception while delivering" \ - " ckc interrupt"); - kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); - return 0; + printk("kvm: The guest lowcore is not mapped during interrupt " + "delivery, killing userspace\n"); + do_exit(SIGKILL); } - return 1; } diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 1782cbcd282..8b00eb2ddf5 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -39,7 +39,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = { { "exit_instruction", VCPU_STAT(exit_instruction) }, { "exit_program_interruption", VCPU_STAT(exit_program_interruption) }, { "exit_instr_and_program_int", VCPU_STAT(exit_instr_and_program) }, - { "instruction_lctg", VCPU_STAT(instruction_lctg) }, + { "instruction_lctlg", VCPU_STAT(instruction_lctlg) }, { "instruction_lctl", VCPU_STAT(instruction_lctl) }, { "deliver_emergency_signal", VCPU_STAT(deliver_emergency_signal) }, { "deliver_service_signal", VCPU_STAT(deliver_service_signal) }, @@ -112,7 +112,12 @@ long kvm_arch_dev_ioctl(struct file *filp, int kvm_dev_ioctl_check_extension(long ext) { - return 0; + switch (ext) { + case KVM_CAP_USER_MEMORY: + return 1; + default: + return 0; + } } /* Section: vm related */ diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c index 5a556114eaa..170392687ce 100644 --- a/arch/s390/kvm/sigp.c +++ b/arch/s390/kvm/sigp.c @@ -43,7 +43,8 @@ #define SIGP_STAT_RECEIVER_CHECK 0x00000001UL -static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, u64 *reg) +static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, + unsigned long *reg) { struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int; int rc; @@ -167,7 +168,7 @@ static int __sigp_set_arch(struct kvm_vcpu *vcpu, u32 parameter) } static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address, - u64 *reg) + unsigned long *reg) { struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int; struct kvm_s390_local_interrupt *li; diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 388cc742005..4993b0f594e 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -42,38 +42,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((__aligned__(PAGE_SIZE))); char empty_zero_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE))); -void show_mem(void) -{ - unsigned long i, total = 0, reserved = 0; - unsigned long shared = 0, cached = 0; - unsigned long flags; - struct page *page; - pg_data_t *pgdat; - - printk("Mem-info:\n"); - show_free_areas(); - for_each_online_pgdat(pgdat) { - pgdat_resize_lock(pgdat, &flags); - for (i = 0; i < pgdat->node_spanned_pages; i++) { - if (!pfn_valid(pgdat->node_start_pfn + i)) - continue; - page = pfn_to_page(pgdat->node_start_pfn + i); - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - pgdat_resize_unlock(pgdat, &flags); - } - printk("%ld pages of RAM\n", total); - printk("%ld reserved pages\n", reserved); - printk("%ld pages shared\n", shared); - printk("%ld pages swap cached\n", cached); -} - /* * paging_init() sets up the page tables */ diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 8879938f335..7bfb0d219d6 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -477,6 +477,10 @@ config SH_RTS7751R2D Select RTS7751R2D if configuring for a Renesas Technology Sales SH-Graphics board. +config SH_RSK7203 + bool "RSK7203" + depends on CPU_SUBTYPE_SH7203 + config SH_SDK7780 bool "SDK7780R3" depends on CPU_SUBTYPE_SH7780 @@ -491,6 +495,21 @@ config SH_HIGHLANDER select SYS_SUPPORTS_PCI select IO_TRAPPED +config SH_SH7785LCR + bool "SH7785LCR" + depends on CPU_SUBTYPE_SH7785 + select SYS_SUPPORTS_PCI + select IO_TRAPPED + +config SH_SH7785LCR_29BIT_PHYSMAPS + bool "SH7785LCR 29bit physmaps" + depends on SH_SH7785LCR + default y + help + This board has 2 physical memory maps. It can be changed with + DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, + you can access all on-board device in 29bit address mode. + config SH_MIGOR bool "Migo-R" depends on CPU_SUBTYPE_SH7722 @@ -498,6 +517,20 @@ config SH_MIGOR Select Migo-R if configuring for the SH7722 Migo-R platform by Renesas System Solutions Asia Pte. Ltd. +config SH_AP325RXA + bool "AP-325RXA" + depends on CPU_SUBTYPE_SH7723 + help + Renesas "AP-325RXA" support. + Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" + +config SH_SH7763RDP + bool "SH7763RDP" + depends on CPU_SUBTYPE_SH7763 + help + Select SH7763RDP if configuring for a Renesas SH7763 + evaluation board. + config SH_EDOSK7705 bool "EDOSK7705" depends on CPU_SUBTYPE_SH7705 @@ -559,6 +592,7 @@ endmenu source "arch/sh/boards/renesas/rts7751r2d/Kconfig" source "arch/sh/boards/renesas/r7780rp/Kconfig" source "arch/sh/boards/renesas/sdk7780/Kconfig" +source "arch/sh/boards/renesas/migor/Kconfig" source "arch/sh/boards/magicpanelr2/Kconfig" menu "Timer and clock configuration" diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 0f454986022..36f4b1f7066 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -36,7 +36,8 @@ config EARLY_SCIF_CONSOLE_PORT default "0xff804000" if CPU_SUBTYPE_MXG default "0xffc30000" if CPU_SUBTYPE_SHX3 default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \ - CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 + CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \ + CPU_SUBTYPE_SH7343 default "0xffe80000" if CPU_SH4 default "0xffea0000" if CPU_SUBTYPE_SH7785 default "0xfffe8000" if CPU_SUBTYPE_SH7203 diff --git a/arch/sh/Makefile b/arch/sh/Makefile index fb7b1b15e39..c627e45c4df 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -121,6 +121,10 @@ machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp machdir-$(CONFIG_SH_MIGOR) += renesas/migor machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780 machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto +machdir-$(CONFIG_SH_RSK7203) += renesas/rsk7203 +machdir-$(CONFIG_SH_AP325RXA) += renesas/ap325rxa +machdir-$(CONFIG_SH_SH7763RDP) += renesas/sh7763rdp +machdir-$(CONFIG_SH_SH7785LCR) += renesas/sh7785lcr machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev machdir-$(CONFIG_SH_LANDISK) += landisk machdir-$(CONFIG_SH_TITAN) += titan diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/dreamcast/rtc.c index b3a876a3b85..a7433685798 100644 --- a/arch/sh/boards/dreamcast/rtc.c +++ b/arch/sh/boards/dreamcast/rtc.c @@ -30,7 +30,7 @@ * * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch. */ -void aica_rtc_gettimeofday(struct timespec *ts) +static void aica_rtc_gettimeofday(struct timespec *ts) { unsigned long val1, val2; @@ -54,7 +54,7 @@ void aica_rtc_gettimeofday(struct timespec *ts) * * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter. */ -int aica_rtc_settimeofday(const time_t secs) +static int aica_rtc_settimeofday(const time_t secs) { unsigned long val1, val2; unsigned long adj = secs + TWENTY_YEARS; diff --git a/arch/sh/boards/renesas/ap325rxa/Makefile b/arch/sh/boards/renesas/ap325rxa/Makefile new file mode 100644 index 00000000000..f663768429f --- /dev/null +++ b/arch/sh/boards/renesas/ap325rxa/Makefile @@ -0,0 +1 @@ +obj-y := setup.o diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c new file mode 100644 index 00000000000..7fa74462bd9 --- /dev/null +++ b/arch/sh/boards/renesas/ap325rxa/setup.c @@ -0,0 +1,313 @@ +/* + * Renesas - AP-325RXA + * (Compatible with Algo System ., LTD. - AP-320A) + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Author : Yusuke Goda <goda.yuske@renesas.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/smc911x.h> +#include <media/soc_camera_platform.h> +#include <media/sh_mobile_ceu.h> +#include <asm/sh_mobile_lcdc.h> +#include <asm/io.h> +#include <asm/clock.h> + +static struct smc911x_platdata smc911x_info = { + .flags = SMC911X_USE_32BIT, + .irq_flags = IRQF_TRIGGER_LOW, +}; + +static struct resource smc9118_resources[] = { + [0] = { + .start = 0xb6080000, + .end = 0xb60fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 35, + .end = 35, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc9118_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc9118_resources), + .resource = smc9118_resources, + .dev = { + .platform_data = &smc911x_info, + }, +}; + +static struct mtd_partition ap325rxa_nor_flash_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = (1 * 1024 * 1024), + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = (2 * 1024 * 1024), + }, { + .name = "other", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data ap325rxa_nor_flash_data = { + .width = 2, + .parts = ap325rxa_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(ap325rxa_nor_flash_partitions), +}; + +static struct resource ap325rxa_nor_flash_resources[] = { + [0] = { + .name = "NOR Flash", + .start = 0x00000000, + .end = 0x00ffffff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device ap325rxa_nor_flash_device = { + .name = "physmap-flash", + .resource = ap325rxa_nor_flash_resources, + .num_resources = ARRAY_SIZE(ap325rxa_nor_flash_resources), + .dev = { + .platform_data = &ap325rxa_nor_flash_data, + }, +}; + +#define FPGA_LCDREG 0xB4100180 +#define FPGA_BKLREG 0xB4100212 +#define FPGA_LCDREG_VAL 0x0018 +#define PORT_PHCR 0xA405010E +#define PORT_PLCR 0xA4050114 +#define PORT_PMCR 0xA4050116 +#define PORT_PRCR 0xA405011C +#define PORT_PSCR 0xA405011E +#define PORT_PZCR 0xA405014C +#define PORT_HIZCRA 0xA4050158 +#define PORT_MSELCRB 0xA4050182 +#define PORT_PSDR 0xA405013E +#define PORT_PZDR 0xA405016C +#define PORT_PSELD 0xA4050154 + +static void ap320_wvga_power_on(void *board_data) +{ + msleep(100); + + /* ASD AP-320/325 LCD ON */ + ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG); + + /* backlight */ + ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR); + ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR); + ctrl_outw(0x100, FPGA_BKLREG); +} + +static struct sh_mobile_lcdc_info lcdc_info = { + .clock_source = LCDC_CLK_EXTERNAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = RGB18, + .clock_divider = 1, + .lcd_cfg = { + .name = "LB070WV1", + .xres = 800, + .yres = 480, + .left_margin = 40, + .right_margin = 160, + .hsync_len = 8, + .upper_margin = 63, + .lower_margin = 80, + .vsync_len = 1, + .sync = 0, /* hsync and vsync are active low */ + }, + .board_cfg = { + .display_on = ap320_wvga_power_on, + }, + } +}; + +static struct resource lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe941fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc_resources), + .resource = lcdc_resources, + .dev = { + .platform_data = &lcdc_info, + }, +}; + +static unsigned char camera_ncm03j_magic[] = +{ + 0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8, + 0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36, + 0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F, + 0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55, + 0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12, + 0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0, + 0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F, + 0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A, + 0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A, + 0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A, + 0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56, + 0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37, + 0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A, + 0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56, + 0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC, + 0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F, +}; + +static int camera_set_capture(struct soc_camera_platform_info *info, + int enable) +{ + struct i2c_adapter *a = i2c_get_adapter(0); + struct i2c_msg msg; + int ret = 0; + int i; + + if (!enable) + return 0; /* no disable for now */ + + for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) { + u_int8_t buf[8]; + + msg.addr = 0x6e; + msg.buf = buf; + msg.len = 2; + msg.flags = 0; + + buf[0] = camera_ncm03j_magic[i]; + buf[1] = camera_ncm03j_magic[i + 1]; + + ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1); + } + + return ret; +} + +static struct soc_camera_platform_info camera_info = { + .iface = 0, + .format_name = "UYVY", + .format_depth = 16, + .format = { + .pixelformat = V4L2_PIX_FMT_UYVY, + .colorspace = V4L2_COLORSPACE_SMPTE170M, + .width = 640, + .height = 480, + }, + .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, + .set_capture = camera_set_capture, +}; + +static struct platform_device camera_device = { + .name = "soc_camera_platform", + .dev = { + .platform_data = &camera_info, + }, +}; + +static struct sh_mobile_ceu_info sh_mobile_ceu_info = { + .flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, +}; + +static struct resource ceu_resources[] = { + [0] = { + .name = "CEU", + .start = 0xfe910000, + .end = 0xfe91009f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 52, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device ceu_device = { + .name = "sh_mobile_ceu", + .num_resources = ARRAY_SIZE(ceu_resources), + .resource = ceu_resources, + .dev = { + .platform_data = &sh_mobile_ceu_info, + }, +}; + +static struct platform_device *ap325rxa_devices[] __initdata = { + &smc9118_device, + &ap325rxa_nor_flash_device, + &lcdc_device, + &ceu_device, + &camera_device, +}; + +static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { +}; + +static int __init ap325rxa_devices_setup(void) +{ + clk_always_enable("mstp200"); /* LCDC */ + clk_always_enable("mstp203"); /* CEU */ + + platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20); + + i2c_register_board_info(0, ap325rxa_i2c_devices, + ARRAY_SIZE(ap325rxa_i2c_devices)); + + return platform_add_devices(ap325rxa_devices, + ARRAY_SIZE(ap325rxa_devices)); +} +device_initcall(ap325rxa_devices_setup); + +static void __init ap325rxa_setup(char **cmdline_p) +{ + /* LCDC configuration */ + ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR); + ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR); + ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA); + + /* CEU */ + ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD); + ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR); + ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR); +} + +static struct sh_machine_vector mv_ap325rxa __initmv = { + .mv_name = "AP-325RXA", + .mv_setup = ap325rxa_setup, +}; diff --git a/arch/sh/boards/renesas/migor/Kconfig b/arch/sh/boards/renesas/migor/Kconfig new file mode 100644 index 00000000000..a7b3b728ec3 --- /dev/null +++ b/arch/sh/boards/renesas/migor/Kconfig @@ -0,0 +1,15 @@ +if SH_MIGOR + +choice + prompt "Migo-R LCD Panel Board Selection" + default SH_MIGOR_QVGA + +config SH_MIGOR_QVGA + bool "QVGA (320x240)" + +config SH_MIGOR_RTA_WVGA + bool "RTA WVGA (800x480)" + +endchoice + +endif diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/renesas/migor/Makefile index 77037567633..5f231dd25c0 100644 --- a/arch/sh/boards/renesas/migor/Makefile +++ b/arch/sh/boards/renesas/migor/Makefile @@ -1 +1,2 @@ obj-y := setup.o +obj-$(CONFIG_SH_MIGOR_QVGA) += lcd_qvga.o diff --git a/arch/sh/boards/renesas/migor/lcd_qvga.c b/arch/sh/boards/renesas/migor/lcd_qvga.c new file mode 100644 index 00000000000..6e960959644 --- /dev/null +++ b/arch/sh/boards/renesas/migor/lcd_qvga.c @@ -0,0 +1,165 @@ +/* + * Support for SuperH MigoR Quarter VGA LCD Panel + * + * Copyright (C) 2008 Magnus Damm + * + * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd. + * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <asm/sh_mobile_lcdc.h> +#include <asm/migor.h> + +/* LCD Module is a PH240320T according to board schematics. This module + * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?) + * Driver IC. This IC is connected to the SH7722 built-in LCDC using a + * SYS-80 interface configured in 16 bit mode. + * + * Index 0: "Device Code Read" returns 0x1505. + */ + +static void reset_lcd_module(void) +{ + ctrl_outb(ctrl_inb(PORT_PHDR) & ~0x04, PORT_PHDR); + mdelay(2); + ctrl_outb(ctrl_inb(PORT_PHDR) | 0x04, PORT_PHDR); + mdelay(1); +} + +/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */ + +static unsigned long adjust_reg18(unsigned short data) +{ + unsigned long tmp1, tmp2; + + tmp1 = (data<<1 | 0x00000001) & 0x000001FF; + tmp2 = (data<<2 | 0x00000200) & 0x0003FE00; + return tmp1 | tmp2; +} + +static void write_reg(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short reg, unsigned short data) +{ + sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data)); +} + +static void write_reg16(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short reg, unsigned short data) +{ + sys_ops->write_index(sys_ops_handle, adjust_reg18(reg)); + sys_ops->write_data(sys_ops_handle, adjust_reg18(data)); +} + +static unsigned long read_reg16(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short reg) +{ + unsigned long data; + + sys_ops->write_index(sys_ops_handle, adjust_reg18(reg)); + data = sys_ops->read_data(sys_ops_handle); + return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00); +} + +static void migor_lcd_qvga_seq(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short const *data, int no_data) +{ + int i; + + for (i = 0; i < no_data; i += 2) + write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]); +} + +static const unsigned short sync_data[] = { + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, +}; + +static const unsigned short magic0_data[] = { + 0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001, + 0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116, + 0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8, +}; + +static const unsigned short magic1_data[] = { + 0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202, + 0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303, + 0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102, + 0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300, + 0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000, + 0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000, + 0x0015, 0x8000, +}; + +static const unsigned short magic2_data[] = { + 0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021, +}; + +static const unsigned short magic3_data[] = { + 0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061, +}; + +int migor_lcd_qvga_setup(void *board_data, void *sohandle, + struct sh_mobile_lcdc_sys_bus_ops *so) +{ + unsigned long xres = 320; + unsigned long yres = 240; + int k; + + reset_lcd_module(); + migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data)); + + if (read_reg16(sohandle, so, 0) != 0x1505) + return -ENODEV; + + pr_info("Migo-R QVGA LCD Module detected.\n"); + + migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data)); + write_reg16(sohandle, so, 0x00A4, 0x0001); + mdelay(10); + + migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data)); + mdelay(100); + + migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data)); + write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1)); + write_reg16(sohandle, so, 0x0051, 0x00ef); + write_reg16(sohandle, so, 0x0052, 0x0000); + write_reg16(sohandle, so, 0x0053, xres - 1); + + migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data)); + mdelay(10); + + migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data)); + mdelay(40); + + /* clear GRAM to avoid displaying garbage */ + + write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */ + write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */ + + for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */ + write_reg16(sohandle, so, 0x0022, 0x0000); + + write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */ + write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */ + write_reg16(sohandle, so, 0x0007, 0x0173); + mdelay(40); + + /* enable display */ + write_reg(sohandle, so, 0x00, 0x22); + mdelay(100); + return 0; +} diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c index 963c9932209..7bd365ad2d0 100644 --- a/arch/sh/boards/renesas/migor/setup.c +++ b/arch/sh/boards/renesas/migor/setup.c @@ -15,9 +15,15 @@ #include <linux/mtd/nand.h> #include <linux/i2c.h> #include <linux/smc91x.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <media/soc_camera_platform.h> +#include <media/sh_mobile_ceu.h> +#include <asm/clock.h> #include <asm/machvec.h> #include <asm/io.h> #include <asm/sh_keysc.h> +#include <asm/sh_mobile_lcdc.h> #include <asm/migor.h> /* Address IRQ Size Bus Description @@ -198,14 +204,237 @@ static struct platform_device migor_nand_flash_device = { } }; +static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = { +#ifdef CONFIG_SH_MIGOR_RTA_WVGA + .clock_source = LCDC_CLK_BUS, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = RGB16, + .clock_divider = 2, + .lcd_cfg = { + .name = "LB070WV1", + .xres = 800, + .yres = 480, + .left_margin = 64, + .right_margin = 16, + .hsync_len = 120, + .upper_margin = 1, + .lower_margin = 17, + .vsync_len = 2, + .sync = 0, + }, + } +#endif +#ifdef CONFIG_SH_MIGOR_QVGA + .clock_source = LCDC_CLK_PERIPHERAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = SYS16A, + .clock_divider = 10, + .lcd_cfg = { + .name = "PH240320T", + .xres = 320, + .yres = 240, + .left_margin = 0, + .right_margin = 16, + .hsync_len = 8, + .upper_margin = 1, + .lower_margin = 17, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT, + }, + .board_cfg = { + .setup_sys = migor_lcd_qvga_setup, + }, + .sys_bus_cfg = { + .ldmt2r = 0x06000a09, + .ldmt3r = 0x180e3418, + }, + } +#endif +}; + +static struct resource migor_lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe941fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device migor_lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(migor_lcdc_resources), + .resource = migor_lcdc_resources, + .dev = { + .platform_data = &sh_mobile_lcdc_info, + }, +}; + +static struct clk *camera_clk; + +static void camera_power_on(void) +{ + unsigned char value; + + camera_clk = clk_get(NULL, "video_clk"); + clk_set_rate(camera_clk, 24000000); + clk_enable(camera_clk); /* start VIO_CKO */ + + mdelay(10); + value = ctrl_inb(PORT_PTDR); + value &= ~0x09; +#ifndef CONFIG_SH_MIGOR_RTA_WVGA + value |= 0x01; +#endif + ctrl_outb(value, PORT_PTDR); + mdelay(10); + + ctrl_outb(value | 8, PORT_PTDR); +} + +static void camera_power_off(void) +{ + clk_disable(camera_clk); /* stop VIO_CKO */ + clk_put(camera_clk); + + ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR); +} + +static unsigned char camera_ov772x_magic[] = +{ + 0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01, + 0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00, + 0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07, + 0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10, + 0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0, + 0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00, + 0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00, + 0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2, + 0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80, + 0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00, + 0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50, + 0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60, + 0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a, + 0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f, + 0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00, + 0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01, + 0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f, + 0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f, + 0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70, + 0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e, + 0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69, + 0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f, + 0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4, + 0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00, + 0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f, + 0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08, + 0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e, + 0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02, + 0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06, + 0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40, + 0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff, + 0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f, + 0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50, + 0x2c, 0x78, +}; + +static int ov772x_set_capture(struct soc_camera_platform_info *info, + int enable) +{ + struct i2c_adapter *a = i2c_get_adapter(0); + struct i2c_msg msg; + int ret = 0; + int i; + + if (!enable) + return 0; /* camera_power_off() is enough */ + + for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) { + u_int8_t buf[8]; + + msg.addr = 0x21; + msg.buf = buf; + msg.len = 2; + msg.flags = 0; + + buf[0] = camera_ov772x_magic[i]; + buf[1] = camera_ov772x_magic[i + 1]; + + ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1); + } + + return ret; +} + +static struct soc_camera_platform_info ov772x_info = { + .iface = 0, + .format_name = "RGB565", + .format_depth = 16, + .format = { + .pixelformat = V4L2_PIX_FMT_RGB565, + .colorspace = V4L2_COLORSPACE_SRGB, + .width = 320, + .height = 240, + }, + .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, + .set_capture = ov772x_set_capture, +}; + +static struct platform_device migor_camera_device = { + .name = "soc_camera_platform", + .dev = { + .platform_data = &ov772x_info, + }, +}; + +static struct sh_mobile_ceu_info sh_mobile_ceu_info = { + .flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \ + | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH, + .enable_camera = camera_power_on, + .disable_camera = camera_power_off, +}; + +static struct resource migor_ceu_resources[] = { + [0] = { + .name = "CEU", + .start = 0xfe910000, + .end = 0xfe91009f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 52, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device migor_ceu_device = { + .name = "sh_mobile_ceu", + .num_resources = ARRAY_SIZE(migor_ceu_resources), + .resource = migor_ceu_resources, + .dev = { + .platform_data = &sh_mobile_ceu_info, + }, +}; + static struct platform_device *migor_devices[] __initdata = { &smc91x_eth_device, &sh_keysc_device, + &migor_lcdc_device, + &migor_ceu_device, + &migor_camera_device, &migor_nor_flash_device, &migor_nand_flash_device, }; -static struct i2c_board_info __initdata migor_i2c_devices[] = { +static struct i2c_board_info migor_i2c_devices[] = { { I2C_BOARD_INFO("rs5c372b", 0x32), }, @@ -217,6 +446,12 @@ static struct i2c_board_info __initdata migor_i2c_devices[] = { static int __init migor_devices_setup(void) { + clk_always_enable("mstp214"); /* KEYSC */ + clk_always_enable("mstp200"); /* LCDC */ + clk_always_enable("mstp203"); /* CEU */ + + platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20); + i2c_register_board_info(0, migor_i2c_devices, ARRAY_SIZE(migor_i2c_devices)); @@ -235,20 +470,51 @@ static void __init migor_setup(char **cmdline_p) ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA); ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA); ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC); - ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2); /* NAND Flash */ ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR); ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200, BSC_CS6ABCR); - /* I2C */ - ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1); - /* Touch Panel - Enable IRQ6 */ ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR); ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA); ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC); + +#ifdef CONFIG_SH_MIGOR_RTA_WVGA + /* LCDC - WVGA - Enable RGB Interface signals */ + ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR); + ctrl_outw(0x0000, PORT_PHCR); + ctrl_outw(0x0000, PORT_PLCR); + ctrl_outw(0x0000, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x000f, PORT_PRCR); + ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x000d) | 0x0400, PORT_PSELD); + ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0100, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA); +#endif +#ifdef CONFIG_SH_MIGOR_QVGA + /* LCDC - QVGA - Enable SYS Interface signals */ + ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR); + ctrl_outw((ctrl_inw(PORT_PHCR) & ~0xcfff) | 0x0010, PORT_PHCR); + ctrl_outw(0x0000, PORT_PLCR); + ctrl_outw(0x0000, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x030f, PORT_PRCR); + ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x0001) | 0x0420, PORT_PSELD); + ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA); +#endif + + /* CEU */ + ctrl_outw((ctrl_inw(PORT_PTCR) & ~0x03c3) | 0x0051, PORT_PTCR); + ctrl_outw(ctrl_inw(PORT_PUCR) & ~0x03ff, PORT_PUCR); + ctrl_outw(ctrl_inw(PORT_PVCR) & ~0x03ff, PORT_PVCR); + ctrl_outw(ctrl_inw(PORT_PWCR) & ~0x3c00, PORT_PWCR); + ctrl_outw(ctrl_inw(PORT_PSELC) | 0x0001, PORT_PSELC); + ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x2000, PORT_PSELD); + ctrl_outw(ctrl_inw(PORT_PSELE) | 0x000f, PORT_PSELE); + ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2200, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x0a00, PORT_HIZCRA); + ctrl_outw(ctrl_inw(PORT_HIZCRB) & ~0x0003, PORT_HIZCRB); } static struct sh_machine_vector mv_migor __initmv = { diff --git a/arch/sh/boards/renesas/rsk7203/Makefile b/arch/sh/boards/renesas/rsk7203/Makefile new file mode 100644 index 00000000000..f663768429f --- /dev/null +++ b/arch/sh/boards/renesas/rsk7203/Makefile @@ -0,0 +1 @@ +obj-y := setup.o diff --git a/arch/sh/boards/renesas/rsk7203/setup.c b/arch/sh/boards/renesas/rsk7203/setup.c new file mode 100644 index 00000000000..0bbda04b03b --- /dev/null +++ b/arch/sh/boards/renesas/rsk7203/setup.c @@ -0,0 +1,126 @@ +/* + * Renesas Technology Europe RSK+ 7203 Support. + * + * Copyright (C) 2008 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/map.h> +#include <asm/machvec.h> +#include <asm/io.h> + +static struct resource smc911x_resources[] = { + [0] = { + .start = 0x24000000, + .end = 0x24000000 + 0x100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 64, + .end = 64, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc911x_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc911x_resources), + .resource = smc911x_resources, +}; + +static const char *probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition *parsed_partitions; + +static struct mtd_partition rsk7203_partitions[] = { + { + .name = "Bootloader", + .offset = 0x00000000, + .size = 0x00040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "Kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = 0x001c0000, + }, { + .name = "Flash_FS", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct physmap_flash_data flash_data = { + .width = 2, +}; + +static struct resource flash_resource = { + .start = 0x20000000, + .end = 0x20400000, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "physmap-flash", + .id = -1, + .resource = &flash_resource, + .num_resources = 1, + .dev = { + .platform_data = &flash_data, + }, +}; + +static struct mtd_info *flash_mtd; + +static struct map_info rsk7203_flash_map = { + .name = "RSK+ Flash", + .size = 0x400000, + .bankwidth = 2, +}; + +static void __init set_mtd_partitions(void) +{ + int nr_parts = 0; + + simple_map_init(&rsk7203_flash_map); + flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map); + nr_parts = parse_mtd_partitions(flash_mtd, probes, + &parsed_partitions, 0); + /* If there is no partition table, used the hard coded table */ + if (nr_parts <= 0) { + flash_data.parts = rsk7203_partitions; + flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions); + } else { + flash_data.nr_parts = nr_parts; + flash_data.parts = parsed_partitions; + } +} + + +static struct platform_device *rsk7203_devices[] __initdata = { + &smc911x_device, + &flash_device, +}; + +static int __init rsk7203_devices_setup(void) +{ + set_mtd_partitions(); + return platform_add_devices(rsk7203_devices, + ARRAY_SIZE(rsk7203_devices)); +} +device_initcall(rsk7203_devices_setup); + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_rsk7203 __initmv = { + .mv_name = "RSK+7203", +}; diff --git a/arch/sh/boards/renesas/sh7763rdp/Makefile b/arch/sh/boards/renesas/sh7763rdp/Makefile new file mode 100644 index 00000000000..f6c0b55516d --- /dev/null +++ b/arch/sh/boards/renesas/sh7763rdp/Makefile @@ -0,0 +1 @@ +obj-y := setup.o irq.o diff --git a/arch/sh/boards/renesas/sh7763rdp/irq.c b/arch/sh/boards/renesas/sh7763rdp/irq.c new file mode 100644 index 00000000000..fd850bad2de --- /dev/null +++ b/arch/sh/boards/renesas/sh7763rdp/irq.c @@ -0,0 +1,45 @@ +/* + * linux/arch/sh/boards/renesas/sh7763rdp/irq.c + * + * Renesas Solutions SH7763RDP Support. + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/sh7763rdp.h> + +#define INTC_BASE (0xFFD00000) +#define INTC_INT2PRI7 (INTC_BASE+0x4001C) +#define INTC_INT2MSKCR (INTC_BASE+0x4003C) +#define INTC_INT2MSKCR1 (INTC_BASE+0x400D4) + +/* + * Initialize IRQ setting + */ +void __init init_sh7763rdp_IRQ(void) +{ + /* GPIO enabled */ + ctrl_outl(1 << 25, INTC_INT2MSKCR); + + /* enable GPIO interrupts */ + ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000, + INTC_INT2PRI7); + + /* USBH enabled */ + ctrl_outl(1 << 17, INTC_INT2MSKCR1); + + /* GETHER enabled */ + ctrl_outl(1 << 16, INTC_INT2MSKCR1); + + /* DMAC enabled */ + ctrl_outl(1 << 8, INTC_INT2MSKCR); +} diff --git a/arch/sh/boards/renesas/sh7763rdp/setup.c b/arch/sh/boards/renesas/sh7763rdp/setup.c new file mode 100644 index 00000000000..925f16af712 --- /dev/null +++ b/arch/sh/boards/renesas/sh7763rdp/setup.c @@ -0,0 +1,128 @@ +/* + * linux/arch/sh/boards/renesas/sh7763rdp/setup.c + * + * Renesas Solutions sh7763rdp board + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/mtd/physmap.h> +#include <asm/io.h> +#include <asm/sh7763rdp.h> + +/* NOR Flash */ +static struct mtd_partition sh7763rdp_nor_flash_partitions[] = { + { + .name = "U-Boot", + .offset = 0, + .size = (2 * 128 * 1024), + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, { + .name = "Linux-Kernel", + .offset = MTDPART_OFS_APPEND, + .size = (20 * 128 * 1024), + }, { + .name = "Root Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data sh7763rdp_nor_flash_data = { + .width = 2, + .parts = sh7763rdp_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions), +}; + +static struct resource sh7763rdp_nor_flash_resources[] = { + [0] = { + .name = "NOR Flash", + .start = 0, + .end = (64 * 1024 * 1024), + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device sh7763rdp_nor_flash_device = { + .name = "physmap-flash", + .resource = sh7763rdp_nor_flash_resources, + .num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources), + .dev = { + .platform_data = &sh7763rdp_nor_flash_data, + }, +}; + +static struct platform_device *sh7763rdp_devices[] __initdata = { + &sh7763rdp_nor_flash_device, +}; + +static int __init sh7763rdp_devices_setup(void) +{ + return platform_add_devices(sh7763rdp_devices, + ARRAY_SIZE(sh7763rdp_devices)); +} +__initcall(sh7763rdp_devices_setup); + +static void __init sh7763rdp_setup(char **cmdline_p) +{ + /* Board version check */ + if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1) + printk(KERN_INFO "RTE Standard Configuration\n"); + else + printk(KERN_INFO "RTA Standard Configuration\n"); + + /* USB pin select bits (clear bit 5-2 to 0) */ + ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2); + /* USBH setup port I controls to other (clear bits 4-9 to 0) */ + ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR); + + /* Select USB Host controller */ + ctrl_outw(0x00, USB_USBHSC); + + /* For LCD */ + /* set PTJ7-1, bits 15-2 of PJCR to 0 */ + ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR); + /* set PTI5, bits 11-10 of PICR to 0 */ + ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR); + ctrl_outw(0, PORT_PKCR); + ctrl_outw(0, PORT_PLCR); + /* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */ + ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2); + /* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */ + ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3); + + /* For HAC */ + /* bit3-0 0100:HAC & SSI1 enable */ + ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1); + /* bit14 1:SSI_HAC_CLK enable */ + ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4); + + /* SH-Ether */ + ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1); + ctrl_outw(0x0, PORT_PFCR); + ctrl_outw(0x0, PORT_PFCR); + ctrl_outw(0x0, PORT_PFCR); + + /* MMC */ + /*selects SCIF and MMC other functions */ + ctrl_outw(0x0001, PORT_PSEL0); + /* MMC clock operates */ + ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1); + ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR); + ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR); +} + +static struct sh_machine_vector mv_sh7763rdp __initmv = { + .mv_name = "sh7763drp", + .mv_setup = sh7763rdp_setup, + .mv_nr_irqs = 112, + .mv_init_irq = init_sh7763rdp_IRQ, +}; diff --git a/arch/sh/boards/renesas/sh7785lcr/Makefile b/arch/sh/boards/renesas/sh7785lcr/Makefile new file mode 100644 index 00000000000..77037567633 --- /dev/null +++ b/arch/sh/boards/renesas/sh7785lcr/Makefile @@ -0,0 +1 @@ +obj-y := setup.o diff --git a/arch/sh/boards/renesas/sh7785lcr/setup.c b/arch/sh/boards/renesas/sh7785lcr/setup.c new file mode 100644 index 00000000000..b95d674ee70 --- /dev/null +++ b/arch/sh/boards/renesas/sh7785lcr/setup.c @@ -0,0 +1,302 @@ +/* + * Renesas Technology Corp. R0P7785LC0011RL Support. + * + * Copyright (C) 2008 Yoshihiro Shimoda + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/sm501.h> +#include <linux/sm501-regs.h> +#include <linux/fb.h> +#include <linux/mtd/physmap.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/i2c-pca-platform.h> +#include <linux/i2c-algo-pca.h> +#include <asm/heartbeat.h> +#include <asm/sh7785lcr.h> + +/* + * NOTE: This board has 2 physical memory maps. + * Please look at include/asm-sh/sh7785lcr.h or hardware manual. + */ +static struct resource heartbeat_resources[] = { + [0] = { + .start = PLD_LEDCR, + .end = PLD_LEDCR, + .flags = IORESOURCE_MEM, + }, +}; + +static struct heartbeat_data heartbeat_data = { + .regsize = 8, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 512 * 1024, + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 4 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 4, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = NOR_FLASH_ADDR, + .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + +static struct resource r8a66597_usb_host_resources[] = { + [0] = { + .name = "r8a66597_hcd", + .start = R8A66597_ADDR, + .end = R8A66597_ADDR + R8A66597_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "r8a66597_hcd", + .start = 2, + .end = 2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device r8a66597_usb_host_device = { + .name = "r8a66597_hcd", + .id = -1, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), + .resource = r8a66597_usb_host_resources, +}; + +static struct resource sm501_resources[] = { + [0] = { + .start = SM107_MEM_ADDR, + .end = SM107_MEM_ADDR + SM107_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SM107_REG_ADDR, + .end = SM107_REG_ADDR + SM107_REG_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = 10, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct fb_videomode sm501_default_mode_crt = { + .pixclock = 35714, /* 28MHz */ + .xres = 640, + .yres = 480, + .left_margin = 105, + .right_margin = 16, + .upper_margin = 33, + .lower_margin = 10, + .hsync_len = 39, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +}; + +static struct fb_videomode sm501_default_mode_pnl = { + .pixclock = 40000, /* 25MHz */ + .xres = 640, + .yres = 480, + .left_margin = 2, + .right_margin = 16, + .upper_margin = 33, + .lower_margin = 10, + .hsync_len = 39, + .vsync_len = 2, + .sync = 0, +}; + +static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = { + .def_bpp = 16, + .def_mode = &sm501_default_mode_pnl, + .flags = SM501FB_FLAG_USE_INIT_MODE | + SM501FB_FLAG_USE_HWCURSOR | + SM501FB_FLAG_USE_HWACCEL | + SM501FB_FLAG_DISABLE_AT_EXIT | + SM501FB_FLAG_PANEL_NO_VBIASEN, +}; + +static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = { + .def_bpp = 16, + .def_mode = &sm501_default_mode_crt, + .flags = SM501FB_FLAG_USE_INIT_MODE | + SM501FB_FLAG_USE_HWCURSOR | + SM501FB_FLAG_USE_HWACCEL | + SM501FB_FLAG_DISABLE_AT_EXIT, +}; + +static struct sm501_platdata_fb sm501_fb_pdata = { + .fb_route = SM501_FB_OWN, + .fb_crt = &sm501_pdata_fbsub_crt, + .fb_pnl = &sm501_pdata_fbsub_pnl, +}; + +static struct sm501_initdata sm501_initdata = { + .gpio_high = { + .set = 0x00001fe0, + .mask = 0x0, + }, + .devices = 0, + .mclk = 84 * 1000000, + .m1xclk = 112 * 1000000, +}; + +static struct sm501_platdata sm501_platform_data = { + .init = &sm501_initdata, + .fb = &sm501_fb_pdata, +}; + +static struct platform_device sm501_device = { + .name = "sm501", + .id = -1, + .dev = { + .platform_data = &sm501_platform_data, + }, + .num_resources = ARRAY_SIZE(sm501_resources), + .resource = sm501_resources, +}; + +static struct resource i2c_resources[] = { + [0] = { + .start = PCA9564_ADDR, + .end = PCA9564_ADDR + PCA9564_SIZE - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, + }, + [1] = { + .start = 12, + .end = 12, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct i2c_pca9564_pf_platform_data i2c_platform_data = { + .gpio = 0, + .i2c_clock_speed = I2C_PCA_CON_330kHz, + .timeout = 100, +}; + +static struct platform_device i2c_device = { + .name = "i2c-pca-platform", + .id = -1, + .dev = { + .platform_data = &i2c_platform_data, + }, + .num_resources = ARRAY_SIZE(i2c_resources), + .resource = i2c_resources, +}; + +static struct platform_device *sh7785lcr_devices[] __initdata = { + &heartbeat_device, + &nor_flash_device, + &r8a66597_usb_host_device, + &sm501_device, + &i2c_device, +}; + +static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = { + { + I2C_BOARD_INFO("r2025sd", 0x32), + }, +}; + +static int __init sh7785lcr_devices_setup(void) +{ + i2c_register_board_info(0, sh7785lcr_i2c_devices, + ARRAY_SIZE(sh7785lcr_i2c_devices)); + + return platform_add_devices(sh7785lcr_devices, + ARRAY_SIZE(sh7785lcr_devices)); +} +__initcall(sh7785lcr_devices_setup); + +/* Initialize IRQ setting */ +void __init init_sh7785lcr_IRQ(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ7654); + plat_irq_setup_pins(IRQ_MODE_IRQ3210); +} + +static void sh7785lcr_power_off(void) +{ + ctrl_outb(0x01, P2SEGADDR(PLD_POFCR)); +} + +/* Initialize the board */ +static void __init sh7785lcr_setup(char **cmdline_p) +{ + void __iomem *sm501_reg; + + printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n"); + + pm_power_off = sh7785lcr_power_off; + + /* sm501 DRAM configuration */ + sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL; + writel(0x000307c2, sm501_reg); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_sh7785lcr __initmv = { + .mv_name = "SH7785LCR", + .mv_setup = sh7785lcr_setup, + .mv_init_irq = init_sh7785lcr_IRQ, +}; + diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c index 763f6deba81..1112e86aa93 100644 --- a/arch/sh/boards/se/7343/irq.c +++ b/arch/sh/boards/se/7343/irq.c @@ -1,202 +1,80 @@ /* - * arch/sh/boards/se/7343/irq.c + * linux/arch/sh/boards/se/7343/irq.c * + * Copyright (C) 2008 Yoshihiro Shimoda + * + * Based on linux/arch/sh/boards/se/7722/irq.c + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include <linux/init.h> -#include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/interrupt.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/mach/se7343.h> +#include <asm/se7343.h> -static void -disable_intreq_irq(unsigned int irq) +static void disable_se7343_irq(unsigned int irq) { - int bit = irq - OFFCHIP_IRQ_BASE; - u16 val; - - val = ctrl_inw(PA_CPLD_IMSK); - val |= 1 << bit; - ctrl_outw(val, PA_CPLD_IMSK); + unsigned int bit = irq - SE7343_FPGA_IRQ_BASE; + ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK); } -static void -enable_intreq_irq(unsigned int irq) +static void enable_se7343_irq(unsigned int irq) { - int bit = irq - OFFCHIP_IRQ_BASE; - u16 val; - - val = ctrl_inw(PA_CPLD_IMSK); - val &= ~(1 << bit); - ctrl_outw(val, PA_CPLD_IMSK); + unsigned int bit = irq - SE7343_FPGA_IRQ_BASE; + ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK); } -static void -mask_and_ack_intreq_irq(unsigned int irq) -{ - disable_intreq_irq(irq); -} - -static unsigned int -startup_intreq_irq(unsigned int irq) -{ - enable_intreq_irq(irq); - return 0; -} - -static void -shutdown_intreq_irq(unsigned int irq) -{ - disable_intreq_irq(irq); -} - -static void -end_intreq_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - enable_intreq_irq(irq); -} - -static struct hw_interrupt_type intreq_irq_type = { - .typename = "FPGA-IRQ", - .startup = startup_intreq_irq, - .shutdown = shutdown_intreq_irq, - .enable = enable_intreq_irq, - .disable = disable_intreq_irq, - .ack = mask_and_ack_intreq_irq, - .end = end_intreq_irq +static struct irq_chip se7343_irq_chip __read_mostly = { + .name = "SE7343-FPGA", + .mask = disable_se7343_irq, + .unmask = enable_se7343_irq, + .mask_ack = disable_se7343_irq, }; -static void -make_intreq_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &intreq_irq_type; - disable_intreq_irq(irq); -} - -int -shmse_irq_demux(int irq) +static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) { - int bit; - volatile u16 val; - - if (irq == IRQ5_IRQ) { - /* Read status Register */ - val = ctrl_inw(PA_CPLD_ST); - bit = ffs(val); - if (bit != 0) - return OFFCHIP_IRQ_BASE + bit - 1; + unsigned short intv = ctrl_inw(PA_CPLD_ST); + struct irq_desc *ext_desc; + unsigned int ext_irq = SE7343_FPGA_IRQ_BASE; + + intv &= (1 << SE7343_FPGA_IRQ_NR) - 1; + + while (intv) { + if (intv & 1) { + ext_desc = irq_desc + ext_irq; + handle_level_irq(ext_irq, ext_desc); + } + intv >>= 1; + ext_irq++; } - return irq; } -/* IRQ5 is multiplexed between the following sources: - * 1. PC Card socket - * 2. Extension slot - * 3. USB Controller - * 4. Serial Controller - * - * We configure IRQ5 as a cascade IRQ. - */ -static struct irqaction irq5 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "IRQ5-cascade", -}; - -static struct ipr_data se7343_irq5_ipr_map[] = { - { IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY }, -}; -static struct ipr_data se7343_siof0_vpu_ipr_map[] = { - { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, - { VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 }, -}; -static struct ipr_data se7343_other_ipr_map[] = { - { DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, - { DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, - - /* I2C block */ - { IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - { IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - { IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - { IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - - { IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - { IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - { IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - { IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - - /* SIOF */ - { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, - - /* SIU */ - { SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY }, - - /* VIO interrupt */ - { CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, - { BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, - { VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, - - /*MFI interrupt*/ - - { MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY }, - - /* LCD controller */ - { LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY }, -}; - /* * Initialize IRQ setting */ -void __init -init_7343se_IRQ(void) +void __init init_7343se_IRQ(void) { - /* Setup Multiplexed interrupts */ - ctrl_outw(8, PA_CPLD_MODESET); /* Set all CPLD interrupts to active - * low. - */ - /* Mask all CPLD controller interrupts */ - ctrl_outw(0x0fff, PA_CPLD_IMSK); - - /* PC Card interrupts */ - make_intreq_irq(PC_IRQ0); - make_intreq_irq(PC_IRQ1); - make_intreq_irq(PC_IRQ2); - make_intreq_irq(PC_IRQ3); - - /* Extension Slot Interrupts */ - make_intreq_irq(EXT_IRQ0); - make_intreq_irq(EXT_IRQ1); - make_intreq_irq(EXT_IRQ2); - make_intreq_irq(EXT_IRQ3); - - /* USB Controller interrupts */ - make_intreq_irq(USB_IRQ0); - make_intreq_irq(USB_IRQ1); - - /* Serial Controller interrupts */ - make_intreq_irq(UART_IRQ0); - make_intreq_irq(UART_IRQ1); - - /* Setup all external interrupts to be active low */ - ctrl_outw(0xaaaa, INTC_ICR1); - - make_ipr_irq(se7343_irq5_ipr_map, ARRAY_SIZE(se7343_irq5_ipr_map)); - - setup_irq(IRQ5_IRQ, &irq5); - /* Set port control to use IRQ5 */ - *(u16 *)0xA4050108 &= ~0xc; - - make_ipr_irq(se7343_siof0_vpu_ipr_map, ARRAY_SIZE(se7343_siof0_vpu_ipr_map)); - - ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */ - - make_ipr_irq(se7343_other_ipr_map, ARRAY_SIZE(se7343_other_ipr_map)); - - ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ + int i; + + ctrl_outw(0, PA_CPLD_IMSK); /* disable all irqs */ + ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ + + for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) + set_irq_chip_and_handler_name(SE7343_FPGA_IRQ_BASE + i, + &se7343_irq_chip, + handle_level_irq, "level"); + + set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux); + set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux); + set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ4_IRQ, se7343_irq_demux); + set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ5_IRQ, se7343_irq_demux); + set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW); } diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index c9431b3a051..8ae718d6c71 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -1,10 +1,11 @@ #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/mtd/physmap.h> #include <asm/machvec.h> #include <asm/mach/se7343.h> +#include <asm/heartbeat.h> #include <asm/irq.h> - -void init_7343se_IRQ(void); +#include <asm/io.h> static struct resource smc91x_resources[] = { [0] = { @@ -17,8 +18,8 @@ static struct resource smc91x_resources[] = { * shared with other devices via externel * interrupt controller in FPGA... */ - .start = EXT_IRQ2, - .end = EXT_IRQ2, + .start = SMC_IRQ, + .end = SMC_IRQ, .flags = IORESOURCE_IRQ, }, }; @@ -38,16 +39,65 @@ static struct resource heartbeat_resources[] = { }, }; +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 128 * 1024, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = 31 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 2, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = 0x00000000, + .end = 0x01ffffff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + static struct platform_device *sh7343se_platform_devices[] __initdata = { &smc91x_device, &heartbeat_device, + &nor_flash_device, }; static int __init sh7343se_devices_setup(void) @@ -55,10 +105,19 @@ static int __init sh7343se_devices_setup(void) return platform_add_devices(sh7343se_platform_devices, ARRAY_SIZE(sh7343se_platform_devices)); } +device_initcall(sh7343se_devices_setup); +/* + * Initialize the board + */ static void __init sh7343se_setup(char **cmdline_p) { - device_initcall(sh7343se_devices_setup); + ctrl_outw(0xf900, FPGA_OUT); /* FPGA */ + + ctrl_outw(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */ + ctrl_outw(0x0020, PORT_PSELD); + + printk(KERN_INFO "MS7343CP01 Setup...done\n"); } /* @@ -90,5 +149,4 @@ static struct sh_machine_vector mv_7343se __initmv = { .mv_outsl = sh7343se_outsl, .mv_init_irq = init_7343se_IRQ, - .mv_irq_demux = shmse_irq_demux, }; diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c index c4550473d4c..b1ec085b867 100644 --- a/arch/sh/boards/se/770x/io.c +++ b/arch/sh/boards/se/770x/io.c @@ -1,25 +1,13 @@ -/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $ - * - * linux/arch/sh/kernel/io_se.c - * +/* * Copyright (C) 2000 Kazumoto Kojima * * I/O routine for Hitachi SolutionEngine. - * */ - #include <linux/kernel.h> #include <linux/types.h> #include <asm/io.h> #include <asm/se.h> -/* SH pcmcia io window base, start and end. */ -int sh_pcic_io_wbase = 0xb8400000; -int sh_pcic_io_start; -int sh_pcic_io_stop; -int sh_pcic_io_type; -int sh_pcic_io_dummy; - /* MS7750 requires special versions of in*, out* routines, since PC-like io ports are located at upper half byte of 16-bit word which can be accessed only with 16-bit wide. */ @@ -33,8 +21,6 @@ port2adr(unsigned int port) return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); else if (port >= 0x1000) return (volatile __u16 *) (PA_83902 + (port << 1)); - else if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - return (volatile __u16 *) (sh_pcic_io_wbase + (port &~ 1)); else return (volatile __u16 *) (PA_SUPERIO + (port << 1)); } @@ -51,32 +37,27 @@ shifted_port(unsigned long port) unsigned char se_inb(unsigned long port) { - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - return *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); - else if (shifted_port(port)) - return (*port2adr(port) >> 8); + if (shifted_port(port)) + return (*port2adr(port) >> 8); else - return (*port2adr(port))&0xff; + return (*port2adr(port))&0xff; } unsigned char se_inb_p(unsigned long port) { unsigned long v; - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - v = *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); - else if (shifted_port(port)) - v = (*port2adr(port) >> 8); + if (shifted_port(port)) + v = (*port2adr(port) >> 8); else - v = (*port2adr(port))&0xff; + v = (*port2adr(port))&0xff; ctrl_delay(); return v; } unsigned short se_inw(unsigned long port) { - if (port >= 0x2000 || - (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)) + if (port >= 0x2000) return *port2adr(port); else maybebadio(port); @@ -91,9 +72,7 @@ unsigned int se_inl(unsigned long port) void se_outb(unsigned char value, unsigned long port) { - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - *(__u8 *)(sh_pcic_io_wbase + port) = value; - else if (shifted_port(port)) + if (shifted_port(port)) *(port2adr(port)) = value << 8; else *(port2adr(port)) = value; @@ -101,9 +80,7 @@ void se_outb(unsigned char value, unsigned long port) void se_outb_p(unsigned char value, unsigned long port) { - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - *(__u8 *)(sh_pcic_io_wbase + port) = value; - else if (shifted_port(port)) + if (shifted_port(port)) *(port2adr(port)) = value << 8; else *(port2adr(port)) = value; @@ -112,8 +89,7 @@ void se_outb_p(unsigned char value, unsigned long port) void se_outw(unsigned short value, unsigned long port) { - if (port >= 0x2000 || - (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)) + if (port >= 0x2000) *port2adr(port) = value; else maybebadio(port); @@ -129,11 +105,7 @@ void se_insb(unsigned long port, void *addr, unsigned long count) volatile __u16 *p = port2adr(port); __u8 *ap = addr; - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) { - volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + 0x40000 + port); - while (count--) - *ap++ = *bp; - } else if (shifted_port(port)) { + if (shifted_port(port)) { while (count--) *ap++ = *p >> 8; } else { @@ -160,11 +132,7 @@ void se_outsb(unsigned long port, const void *addr, unsigned long count) volatile __u16 *p = port2adr(port); const __u8 *ap = addr; - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) { - volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + port); - while (count--) - *bp = *ap++; - } else if (shifted_port(port)) { + if (shifted_port(port)) { while (count--) *p = *ap++ << 8; } else { @@ -177,6 +145,7 @@ void se_outsw(unsigned long port, const void *addr, unsigned long count) { volatile __u16 *p = port2adr(port); const __u16 *ap = addr; + while (count--) *p = *ap++; } diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index 318bc8a3969..cf4a5ba12df 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -14,8 +14,6 @@ #include <asm/smc37c93x.h> #include <asm/heartbeat.h> -void init_se_IRQ(void); - /* * Configure the Super I/O chip */ @@ -73,7 +71,7 @@ static struct resource cf_ide_resources[] = { }, [1] = { .start = PA_MRSHPC_IO + 0x1f0 + 0x206, - .end = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8, + .end = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8, .flags = IORESOURCE_MEM, }, [2] = { @@ -115,9 +113,58 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; +/* SH771X Ethernet driver */ +static struct resource sh_eth0_resources[] = { + [0] = { + .start = SH_ETH0_BASE, + .end = SH_ETH0_BASE + 0x1B8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SH_ETH0_IRQ, + .end = SH_ETH0_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_eth0_device = { + .name = "sh-eth", + .id = 0, + .dev = { + .platform_data = PHY_ID, + }, + .num_resources = ARRAY_SIZE(sh_eth0_resources), + .resource = sh_eth0_resources, +}; + +static struct resource sh_eth1_resources[] = { + [0] = { + .start = SH_ETH1_BASE, + .end = SH_ETH1_BASE + 0x1B8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SH_ETH1_IRQ, + .end = SH_ETH1_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_eth1_device = { + .name = "sh-eth", + .id = 1, + .dev = { + .platform_data = PHY_ID, + }, + .num_resources = ARRAY_SIZE(sh_eth1_resources), + .resource = sh_eth1_resources, +}; + static struct platform_device *se_devices[] __initdata = { &heartbeat_device, &cf_ide_device, + &sh_eth0_device, + &sh_eth1_device, }; static int __init se_devices_setup(void) diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c index ede3957fc14..6e228ea5978 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/se/7722/setup.c @@ -16,6 +16,7 @@ #include <linux/input.h> #include <linux/smc91x.h> #include <asm/machvec.h> +#include <asm/clock.h> #include <asm/se7722.h> #include <asm/io.h> #include <asm/heartbeat.h> @@ -145,6 +146,8 @@ static struct platform_device *se7722_devices[] __initdata = { static int __init se7722_devices_setup(void) { + clk_always_enable("mstp214"); /* KEYSC */ + return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices)); } @@ -154,11 +157,6 @@ static void __init se7722_setup(char **cmdline_p) { ctrl_outw(0x010D, FPGA_OUT); /* FPGA */ - ctrl_outl(0x00051001, MSTPCR0); - ctrl_outl(0x00000000, MSTPCR1); - /* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC, USB */ - ctrl_outl(0xffffb7c0, MSTPCR2); - ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */ ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */ diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index 89b408620dc..8b37869a822 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -40,7 +40,7 @@ KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \ KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%08x" \ $$[$(CONFIG_PAGE_OFFSET) + \ $(CONFIG_MEMORY_START) + \ - $(CONFIG_ZERO_PAGE_OFFSET)+0x1000]') + $(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]') quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \ diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32 index c0d25fb1aa6..47685f618ae 100644 --- a/arch/sh/boot/compressed/Makefile_32 +++ b/arch/sh/boot/compressed/Makefile_32 @@ -35,8 +35,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) -LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh-linux -T OBJCOPYFLAGS += -R .empty_zero_page -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,ld) +$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,as_o_S) diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64 index 912f3e205a0..658d4f91555 100644 --- a/arch/sh/boot/compressed/Makefile_64 +++ b/arch/sh/boot/compressed/Makefile_64 @@ -37,8 +37,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) -LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh64-linux -T OBJCOPYFLAGS += -R .empty_zero_page -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,ld) +$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,as_o_S) diff --git a/arch/sh/boot/compressed/piggy.S b/arch/sh/boot/compressed/piggy.S new file mode 100644 index 00000000000..566071926b1 --- /dev/null +++ b/arch/sh/boot/compressed/piggy.S @@ -0,0 +1,8 @@ + .global input_len, input_data + .data +input_len: + .long input_data_end - input_data +input_data: + .incbin "arch/sh/boot/compressed/vmlinux.bin.gz" +input_data_end: + .end diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr deleted file mode 100644 index 1ed9d791f86..00000000000 --- a/arch/sh/boot/compressed/vmlinux.scr +++ /dev/null @@ -1,9 +0,0 @@ -SECTIONS -{ - .data : { - input_len = .; - LONG(input_data_end - input_data) input_data = .; - *(.data) - input_data_end = .; - } -} diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig new file mode 100644 index 00000000000..5471df53753 --- /dev/null +++ b/arch/sh/configs/ap325rxa_defconfig @@ -0,0 +1,947 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc4 +# Wed Jun 4 17:30:00 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SHX2=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_CPU_SUBTYPE_SH7723=y +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_29BIT=y +# CONFIG_X2TLB is not set +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +CONFIG_SH_AP325RXA=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xffffffff +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +# CONFIG_SMC91X is not set +CONFIG_SMC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=6 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig index 84c0075e2ad..7b727363844 100644 --- a/arch/sh/configs/se7343_defconfig +++ b/arch/sh/configs/se7343_defconfig @@ -1,40 +1,55 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:46:17 2006 +# Linux kernel version: 2.6.26-rc8 +# Mon Jul 7 13:12:45 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -46,33 +61,41 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y # CONFIG_SHMEM is not set -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -86,62 +109,28 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y # # System type # -CONFIG_SOLUTION_ENGINE=y -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -CONFIG_SH_7343_SOLUTION_ENGINE=y -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SH4AL_DSP=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -150,67 +139,88 @@ CONFIG_CPU_SH4AL_DSP=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set CONFIG_CPU_SUBTYPE_SH7343=y +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x01000000 -CONFIG_32BIT=y +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_SH_FPU is not set +# CONFIG_CPU_BIG_ENDIAN is not set # CONFIG_SH_FPU_EMU is not set CONFIG_SH_DSP=y # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_DSP=y + +# +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_7343_SOLUTION_ENGINE=y # -# Timer support +# Timer and clock configuration # CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=27000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -225,57 +235,50 @@ CONFIG_SH_PCLK_FREQ=27000000 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_BOOL is not set # # Bus options # -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_CF_ENABLER is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # CONFIG_NET=y @@ -283,22 +286,20 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set @@ -310,29 +311,18 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -345,10 +335,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -356,9 +342,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -367,36 +364,32 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -422,13 +415,15 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_PLATRAM is not set # @@ -445,130 +440,101 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support +# SCSI support type (disk, tape, CD-ROM) # +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # -# I2O device support +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs # +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# Network device support +# SCSI Transports # +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -576,13 +542,13 @@ CONFIG_SMC91X=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -592,6 +558,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -608,6 +575,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -626,147 +594,102 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_UNIX98_PTYS is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# +# CONFIG_I2C is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # -# Misc devices +# Multimedia devices # # -# Multimedia devices +# Multimedia core support # CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y # -# Video Capture Adapters +# Multimedia drivers # +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set - -# -# Radio Adapters -# - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_DAB is not set # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_EPSON1355 is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Console display driver support +# Display device support # -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# Logo configuration +# Console display driver support # +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set # CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -802,85 +725,63 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_MPU401 is not set # -# Open Sound System +# SUPERH devices # -# CONFIG_SOUND_PRIME is not set # -# USB support +# System on Chip audio support # -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_SND_SOC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# SoC Audio support for SuperH # # -# USB Gadget Support +# ALSA SoC audio for Freescale SOCs # -# CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# SoC Audio for the Texas Instruments OMAP # -# CONFIG_MMC is not set # -# LED devices +# Open Sound System # +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_UIO is not set # # File systems # -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -909,7 +810,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -922,40 +822,39 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set +CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y +# CONFIG_NFSD_V4 is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -963,56 +862,130 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000 +CONFIG_EARLY_PRINTK=y +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Cryptographic options +# Compression # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig index 2dd83af988f..7be79cd04eb 100644 --- a/arch/sh/configs/se7712_defconfig +++ b/arch/sh/configs/se7712_defconfig @@ -1,53 +1,57 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc4 -# Wed Mar 28 10:19:02 2007 +# Linux kernel version: 2.6.26-rc6 +# Wed Jun 18 16:36:08 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -55,33 +59,41 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y # CONFIG_BUG is not set CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y # CONFIG_SHMEM is not set -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -95,57 +107,17 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y # # System type # -CONFIG_SOLUTION_ENGINE=y -CONFIG_SH_SOLUTION_ENGINE=y -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_HIGHLANDER is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_LBOX_RE2 is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH3=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -153,10 +125,8 @@ CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set CONFIG_CPU_SUBTYPE_SH7712=y - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -165,37 +135,37 @@ CONFIG_CPU_SUBTYPE_SH7712=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x02000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -203,21 +173,21 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set -CONFIG_CF_ENABLER=y -# CONFIG_CF_AREA5 is not set -CONFIG_CF_AREA6=y -CONFIG_CF_BASE_ADDR=0xb8000000 +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -230,6 +200,14 @@ CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_DSP=y + +# +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_SOLUTION_ENGINE=y +# CONFIG_SH_AP325RXA is not set # # Timer and clock configuration @@ -237,6 +215,10 @@ CONFIG_CPU_HAS_SR_RB=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=66666666 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -251,7 +233,6 @@ CONFIG_SH_PCLK_FREQ=66666666 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set # # Additional SuperH Device Drivers @@ -267,48 +248,40 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" # # Bus options # -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_CF_ENABLER=y +# CONFIG_CF_AREA5 is not set +CONFIG_CF_AREA6=y +CONFIG_CF_BASE_ADDR=0xb8000000 +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # CONFIG_NET=y @@ -316,7 +289,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -324,6 +296,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -334,11 +307,10 @@ CONFIG_ASK_IP_FIB_HASH=y CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set +CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set @@ -355,30 +327,17 @@ CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -391,15 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# CONFIG_NET_SCHED=y -CONFIG_NET_SCH_FIFO=y -CONFIG_NET_SCH_CLK_JIFFIES=y -# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -# CONFIG_NET_SCH_CLK_CPU is not set # # Queueing/Scheduling @@ -408,6 +359,7 @@ CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_HFSC=y CONFIG_NET_SCH_PRIO=y +# CONFIG_NET_SCH_RR is not set CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y @@ -415,7 +367,6 @@ CONFIG_NET_SCH_TBF=y CONFIG_NET_SCH_GRED=y CONFIG_NET_SCH_DSMARK=y CONFIG_NET_SCH_NETEM=y -CONFIG_NET_SCH_INGRESS=y # # Classification @@ -429,50 +380,55 @@ CONFIG_NET_CLS_FW=y # CONFIG_NET_CLS_U32 is not set # CONFIG_NET_CLS_RSVP is not set # CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set -# CONFIG_NET_CLS_POLICE is not set CONFIG_NET_CLS_IND=y -CONFIG_NET_ESTIMATOR=y +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# # Device Drivers # # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -485,6 +441,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -510,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -533,44 +489,25 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -578,6 +515,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -599,6 +537,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -606,94 +545,72 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set CONFIG_PATA_PLATFORM=y - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +CONFIG_MDIO_BITBANG=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +CONFIG_SH_ETH=y +# CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -711,6 +628,7 @@ CONFIG_NETDEVICES=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -728,99 +646,78 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=m -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Hardware Monitoring support +# Sonics Silicon Backplane # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# USB support +# Sound # -# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -834,40 +731,10 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# +# CONFIG_UIO is not set # # File systems @@ -877,20 +744,21 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -919,7 +787,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -935,68 +802,67 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set # CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DETECT_SOFTLOCKUP is not set +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1004,21 +870,28 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_DEBUG_BOOTMEM is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set # CONFIG_SH_KGDB is not set # @@ -1026,62 +899,100 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y # -# Cryptographic options +# Crypto core or helper # -CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_DEFLATE=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Hardware crypto devices +# Compression # +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig new file mode 100644 index 00000000000..83f3fe5db3e --- /dev/null +++ b/arch/sh/configs/sh7763rdp_defconfig @@ -0,0 +1,1052 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc4 +# Fri Jun 6 12:20:17 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +CONFIG_CPU_SUBTYPE_SH7763=y +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +CONFIG_SH_SH7763RDP=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_PCLK_FREQ=66666666 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLKDEVS=y +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +CONFIG_MDIO_BITBANG=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +# CONFIG_SMC91X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=3 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=y +CONFIG_NLS_CODEPAGE_775=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +CONFIG_NLS_CODEPAGE_855=y +CONFIG_NLS_CODEPAGE_857=y +CONFIG_NLS_CODEPAGE_860=y +CONFIG_NLS_CODEPAGE_861=y +CONFIG_NLS_CODEPAGE_862=y +CONFIG_NLS_CODEPAGE_863=y +CONFIG_NLS_CODEPAGE_864=y +CONFIG_NLS_CODEPAGE_865=y +CONFIG_NLS_CODEPAGE_866=y +CONFIG_NLS_CODEPAGE_869=y +CONFIG_NLS_CODEPAGE_936=y +CONFIG_NLS_CODEPAGE_950=y +CONFIG_NLS_CODEPAGE_932=y +CONFIG_NLS_CODEPAGE_949=y +CONFIG_NLS_CODEPAGE_874=y +CONFIG_NLS_ISO8859_8=y +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +CONFIG_NLS_ISO8859_3=y +CONFIG_NLS_ISO8859_4=y +CONFIG_NLS_ISO8859_5=y +CONFIG_NLS_ISO8859_6=y +CONFIG_NLS_ISO8859_7=y +CONFIG_NLS_ISO8859_9=y +CONFIG_NLS_ISO8859_13=y +CONFIG_NLS_ISO8859_14=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_KOI8_R=y +CONFIG_NLS_KOI8_U=y +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig new file mode 100644 index 00000000000..ff72697365d --- /dev/null +++ b/arch/sh/configs/sh7785lcr_defconfig @@ -0,0 +1,1388 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc8 +# Tue Jul 15 21:37:59 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_NUMA=y +CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_IO_TRAPPED=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SHX2=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +CONFIG_CPU_SUBTYPE_SH7785=y +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_29BIT=y +# CONFIG_PMB is not set +# CONFIG_X2TLB is not set +CONFIG_VSYSCALL=y +# CONFIG_NUMA is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=2 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +CONFIG_SH_STORE_QUEUES=y +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +# CONFIG_SH_HIGHLANDER is not set +CONFIG_SH_SH7785LCR=y +CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x00000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=6 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_ALGOPCA=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +CONFIG_I2C_PCA_PLATFORM=y +# CONFIG_I2C_SH_MOBILE is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +CONFIG_FB_SM501=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_LOGO_SUPERH_MONO is not set +# CONFIG_LOGO_SUPERH_VGA16 is not set +# CONFIG_LOGO_SUPERH_CLUT224 is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +CONFIG_USB_R8A66597_HCD=y + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_SH is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_DEBUG_BOOTMEM is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 0718805774e..847e90894d1 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -23,3 +23,4 @@ obj-$(CONFIG_SH_LANDISK) += ops-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-se7780.o obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o +obj-$(CONFIG_SH_SH7785LCR) += ops-sh7785lcr.o fixups-sh7785lcr.o diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c new file mode 100644 index 00000000000..4949e601387 --- /dev/null +++ b/arch/sh/drivers/pci/fixups-sh7785lcr.c @@ -0,0 +1,46 @@ +/* + * arch/sh/drivers/pci/fixups-sh7785lcr.c + * + * R0P7785LC0011RL PCI fixups + * Copyright (C) 2008 Yoshihiro Shimoda + * + * Based on arch/sh/drivers/pci/fixups-r7780rp.c + * Copyright (C) 2003 Lineo uSolutions, Inc. + * Copyright (C) 2004 - 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/pci.h> +#include "pci-sh4.h" + +int pci_fixup_pcic(void) +{ + pci_write_reg(0x000043ff, SH4_PCIINTM); + pci_write_reg(0x0000380f, SH4_PCIAINTM); + + pci_write_reg(0xfbb00047, SH7780_PCICMD); + pci_write_reg(0x00000000, SH7780_PCIIBAR); + + pci_write_reg(0x00011912, SH7780_PCISVID); + pci_write_reg(0x08000000, SH7780_PCICSCR0); + pci_write_reg(0x0000001b, SH7780_PCICSAR0); + pci_write_reg(0xfd000000, SH7780_PCICSCR1); + pci_write_reg(0x0000000f, SH7780_PCICSAR1); + + pci_write_reg(0xfd000000, SH7780_PCIMBR0); + pci_write_reg(0x00fc0000, SH7780_PCIMBMR0); + +#ifdef CONFIG_32BIT + pci_write_reg(0xc0000000, SH7780_PCIMBR2); + pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); +#endif + + /* Set IOBR for windows containing area specified in pci.h */ + pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)), + SH7780_PCIIOBR); + pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR); + + return 0; +} diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index e1284fc6936..f54c291db37 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -22,6 +22,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/pci.h> +#include <linux/module.h> #include <asm/io.h> #include <asm/irq.h> @@ -48,6 +49,7 @@ struct pci_channel board_pci_channels[] = { &gapspci_mem_resource, 0, 1 }, { 0, } }; +EXPORT_SYMBOL(board_pci_channels); /* * The !gapspci_config_access case really shouldn't happen, ever, unless diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c new file mode 100644 index 00000000000..b3bd6870205 --- /dev/null +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -0,0 +1,66 @@ +/* + * Author: Ian DaSilva (idasilva@mvista.com) + * + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the Renesas R0P7785LC0011RL board + * Based on arch/sh/drivers/pci/ops-r7780rp.c + * + */ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include "pci-sh4.h" + +static char irq_tab[] __initdata = { + 65, 66, 67, 68, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + return irq_tab[slot]; +} + +static struct resource sh7785_io_resource = { + .name = "SH7785_IO", + .start = SH7780_PCI_IO_BASE, + .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7785_mem_resource = { + .name = "SH7785_mem", + .start = SH7780_PCI_MEMORY_BASE, + .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +struct pci_channel board_pci_channels[] = { + { &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; +EXPORT_SYMBOL(board_pci_channels); + +static struct sh4_pci_address_map sh7785_pci_map = { + .window0 = { + .base = SH7780_CS2_BASE_ADDR, + .size = 0x04000000, + }, + + .window1 = { + .base = SH7780_CS3_BASE_ADDR, + .size = 0x04000000, + }, + + .flags = SH4_PCIC_NO_RESET, +}; + +int __init pcibios_init_platform(void) +{ + return sh7780_pcic_init(&sh7785_pci_map); +} diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c index ea404704ace..cf48b12ee58 100644 --- a/arch/sh/drivers/pci/pci-auto.c +++ b/arch/sh/drivers/pci/pci-auto.c @@ -78,7 +78,7 @@ static struct pci_dev *fake_pci_dev(struct pci_channel *hose, } #define EARLY_PCI_OP(rw, size, type) \ -int early_##rw##_config_##size(struct pci_channel *hose, \ +static int early_##rw##_config_##size(struct pci_channel *hose, \ int top_bus, int bus, int devfn, int offset, type value) \ { \ return pci_##rw##_config_##size( \ diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index f57095a2617..d3839e609aa 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -135,7 +135,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) * If we set up a device for bus mastering, we need to check and set * the latency timer as it may not be properly set. */ -unsigned int pcibios_max_latency = 255; +static unsigned int pcibios_max_latency = 255; void pcibios_set_master(struct pci_dev *dev) { diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index 4bbdce36b92..0e6905fe9fe 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -21,7 +21,7 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_STACKTRACE) += stacktrace.o -obj-$(CONFIG_BINFMT_ELF) += dump_task.o +obj-$(CONFIG_ELF_CORE) += dump_task.o obj-$(CONFIG_IO_TRAPPED) += io_trapped.o EXTRA_CFLAGS += -Werror diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c index 01ff4d05aab..d3d9f320423 100644 --- a/arch/sh/kernel/cf-enabler.c +++ b/arch/sh/kernel/cf-enabler.c @@ -157,7 +157,7 @@ static int __init cf_init_se(void) } #endif -int __init cf_init(void) +static int __init cf_init(void) { if (mach_is_se() || mach_is_7722se() || mach_is_7721se()) return cf_init_se(); diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index b5f1e23ed57..f5eb56e6bc5 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -88,7 +88,7 @@ static void propagate_rate(struct clk *clk) } } -int __clk_enable(struct clk *clk) +static int __clk_enable(struct clk *clk) { /* * See if this is the first time we're enabling the clock, some @@ -111,7 +111,6 @@ int __clk_enable(struct clk *clk) return 0; } -EXPORT_SYMBOL_GPL(__clk_enable); int clk_enable(struct clk *clk) { @@ -131,7 +130,7 @@ static void clk_kref_release(struct kref *kref) /* Nothing to do */ } -void __clk_disable(struct clk *clk) +static void __clk_disable(struct clk *clk) { int count = kref_put(&clk->kref, clk_kref_release); @@ -143,7 +142,6 @@ void __clk_disable(struct clk *clk) clk->ops->disable(clk); } } -EXPORT_SYMBOL_GPL(__clk_disable); void clk_disable(struct clk *clk) { @@ -310,15 +308,11 @@ static int show_clocks(char *buf, char **start, off_t off, list_for_each_entry_reverse(clk, &clock_list, node) { unsigned long rate = clk_get_rate(clk); - /* - * Don't bother listing dummy clocks with no ancestry - * that only support enable and disable ops. - */ - if (unlikely(!rate && !clk->parent)) - continue; - - p += sprintf(p, "%-12s\t: %ld.%02ldMHz\n", clk->name, - rate / 1000000, (rate % 1000000) / 10000); + p += sprintf(p, "%-12s\t: %ld.%02ldMHz\t%s\n", clk->name, + rate / 1000000, (rate % 1000000) / 10000, + ((clk->flags & CLK_ALWAYS_ENABLED) || + (atomic_read(&clk->kref.refcount) != 1)) ? + "enabled" : "disabled"); } return p - buf; diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c index da5dae78788..8c70e201bde 100644 --- a/arch/sh/kernel/cpu/irq/intc.c +++ b/arch/sh/kernel/cpu/irq/intc.c @@ -62,7 +62,7 @@ struct intc_desc_int { #endif static unsigned int intc_prio_level[NR_IRQS]; /* for now */ -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) static unsigned long ack_handle[NR_IRQS]; #endif @@ -231,7 +231,7 @@ static void intc_disable(unsigned int irq) } } -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) static void intc_mask_ack(unsigned int irq) { struct intc_desc_int *d = get_intc_desc(irq); @@ -244,8 +244,23 @@ static void intc_mask_ack(unsigned int irq) if (handle) { addr = INTC_REG(d, _INTC_ADDR_D(handle), 0); - ctrl_inb(addr); - ctrl_outb(0x3f ^ set_field(0, 1, handle), addr); + switch (_INTC_FN(handle)) { + case REG_FN_MODIFY_BASE + 0: /* 8bit */ + ctrl_inb(addr); + ctrl_outb(0xff ^ set_field(0, 1, handle), addr); + break; + case REG_FN_MODIFY_BASE + 1: /* 16bit */ + ctrl_inw(addr); + ctrl_outw(0xffff ^ set_field(0, 1, handle), addr); + break; + case REG_FN_MODIFY_BASE + 3: /* 32bit */ + ctrl_inl(addr); + ctrl_outl(0xffffffff ^ set_field(0, 1, handle), addr); + break; + default: + BUG(); + break; + } } } #endif @@ -466,7 +481,7 @@ static unsigned int __init intc_prio_data(struct intc_desc *desc, return 0; } -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) static unsigned int __init intc_ack_data(struct intc_desc *desc, struct intc_desc_int *d, intc_enum enum_id) @@ -601,7 +616,7 @@ static void __init intc_register_irq(struct intc_desc *desc, /* irq should be disabled by default */ d->chip.mask(irq); -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) if (desc->ack_regs) ack_handle[irq] = intc_ack_data(desc, d, enum_id); #endif @@ -635,7 +650,7 @@ void __init register_intc_controller(struct intc_desc *desc) d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0; d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0; -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0; #endif d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg)); @@ -676,7 +691,7 @@ void __init register_intc_controller(struct intc_desc *desc) d->chip.mask_ack = intc_disable; d->chip.set_type = intc_set_sense; -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) if (desc->ack_regs) { for (i = 0; i < desc->nr_ack_regs; i++) k += save_reg(d, k, desc->ack_regs[i].set_reg, 0); diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index 0fc89069d8c..ee894e5a45e 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -3,7 +3,7 @@ * * The SH-2 exception entry * - * Copyright (C) 2005,2006 Yoshinori Sato + * Copyright (C) 2005-2008 Yoshinori Sato * Copyright (C) 2005 AXE,Inc. * * This file is subject to the terms and conditions of the GNU General Public @@ -36,43 +36,41 @@ OFF_TRA = (16*4+6*4) #include <asm/entry-macros.S> ENTRY(exception_handler) - ! already saved r0/r1 + ! stack + ! r0 <- point sp + ! r1 + ! pc + ! sr + ! r0 = temporary + ! r1 = vector (pseudo EXPEVT / INTEVT / TRA) mov.l r2,@-sp mov.l r3,@-sp - mov r0,r1 cli mov.l $cpu_mode,r2 mov.l @r2,r0 mov.l @(5*4,r15),r3 ! previous SR - shll2 r3 ! set "S" flag - rotl r0 ! T <- "S" flag - rotl r0 ! "S" flag is LSB - rotcr r3 ! T -> r3:b30 - shlr r3 - shlr r0 - bt/s 1f - mov.l r3,@(5*4,r15) ! copy cpu mode to SR + or r0,r3 ! set MD + tst r0,r0 + bf/s 1f ! previous mode check + mov.l r3,@(5*4,r15) ! update SR ! switch to kernel mode - mov #1,r0 - rotr r0 - rotr r0 + mov.l __md_bit,r0 mov.l r0,@r2 ! enter kernel mode mov.l $current_thread_info,r2 mov.l @r2,r2 - mov #0x20,r0 + mov #(THREAD_SIZE >> 8),r0 shll8 r0 add r2,r0 mov r15,r2 ! r2 = user stack top mov r0,r15 ! switch kernel stack - add #-4,r15 ! dummy mov.l r1,@-r15 ! TRA sts.l macl, @-r15 sts.l mach, @-r15 stc.l gbr, @-r15 - mov.l @(4*4,r2),r0 - mov.l @(5*4,r2),r1 - mov.l r1,@-r15 ! original SR + mov.l @(5*4,r2),r0 + mov.l r0,@-r15 ! original SR sts.l pr,@-r15 + mov.l @(4*4,r2),r0 mov.l r0,@-r15 ! original PC mov r2,r3 add #(4+2)*4,r3 ! rewind r0 - r3 + exception frame @@ -88,14 +86,15 @@ ENTRY(exception_handler) mov.l r6,@-r15 mov.l r5,@-r15 mov.l r4,@-r15 + mov r1,r9 ! save TRA mov r2,r8 ! copy user -> kernel stack - mov.l @r8+,r3 + mov.l @(0,r8),r3 mov.l r3,@-r15 - mov.l @r8+,r2 + mov.l @(4,r8),r2 mov.l r2,@-r15 - mov.l @r8+,r1 + mov.l @(12,r8),r1 mov.l r1,@-r15 - mov.l @r8+,r0 + mov.l @(8,r8),r0 bra 2f mov.l r0,@-r15 1: @@ -107,10 +106,11 @@ ENTRY(exception_handler) mov.l r0,@-r15 mov.l @r2+,r0 ! old R2 mov.l r0,@-r15 - mov.l @r2+,r0 ! old R1 - mov.l r0,@-r15 - mov.l @r2+,r0 ! old R0 + mov.l @(4,r2),r0 ! old R1 mov.l r0,@-r15 + mov.l @r2,r0 ! old R0 + mov.l r0,@-r15 + add #8,r2 mov.l @r2+,r3 ! old PC mov.l @r2+,r0 ! old SR add #-4,r2 ! exception frame stub (sr) @@ -135,14 +135,12 @@ ENTRY(exception_handler) mov.l r6,@-r2 mov.l r5,@-r2 mov.l r4,@-r2 + mov r1,r9 mov.l @(OFF_R0,r15),r0 mov.l @(OFF_R1,r15),r1 mov.l @(OFF_R2,r15),r2 mov.l @(OFF_R3,r15),r3 2: - mov #OFF_TRA,r8 - add r15,r8 - mov.l @r8,r9 mov #64,r8 cmp/hs r8,r9 bt interrupt_entry ! vec >= 64 is interrupt @@ -150,26 +148,14 @@ ENTRY(exception_handler) cmp/hs r8,r9 bt trap_entry ! 64 > vec >= 32 is trap -#if defined(CONFIG_SH_FPU) - mov #13,r8 - cmp/eq r8,r9 - bt 10f ! fpu - nop -#endif - mov.l 4f,r8 mov r9,r4 shll2 r9 add r9,r8 - mov.l @r8,r8 - mov #0,r9 - cmp/eq r9,r8 + mov.l @r8,r8 ! exception handler address + tst r8,r8 bf 3f mov.l 8f,r8 ! unhandled exception -#if defined(CONFIG_SH_FPU) -10: - mov.l 9f, r8 ! unhandled exception -#endif 3: mov.l 5f,r10 jmp @r8 @@ -188,10 +174,7 @@ interrupt_entry: 5: .long ret_from_exception 6: .long ret_from_irq 7: .long do_IRQ -8: .long do_exception_error -#ifdef CONFIG_SH_FPU -9: .long fpu_error_trap_handler -#endif +8: .long exception_error trap_entry: mov #0x30,r8 @@ -200,24 +183,9 @@ trap_entry: add #-0x10,r9 ! convert SH2 to SH3/4 ABI 1: shll2 r9 ! TRA - mov #OFF_TRA,r8 - add r15,r8 - mov.l r9,@r8 - mov r9,r8 -#ifdef CONFIG_TRACE_IRQFLAGS - mov.l 2f, r9 - jsr @r9 - nop -#endif - sti - bra system_call - nop + bra system_call ! jump common systemcall entry + mov r9,r8 - .align 2 -#ifdef CONFIG_TRACE_IRQFLAGS -2: .long trace_hardirqs_on -#endif - #if defined(CONFIG_SH_STANDARD_BIOS) /* Unwind the stack and jmp to the debug entry */ ENTRY(sh_bios_handler) @@ -240,7 +208,7 @@ ENTRY(sh_bios_handler) mov.l @r2,r2 stc sr,r3 mov.l r2,@r0 - mov.l r3,@r0 + mov.l r3,@(4,r0) mov.l r1,@(8,r0) mov.l @r15+, r0 mov.l @r15+, r1 @@ -272,22 +240,30 @@ ENTRY(address_error_trap_handler) mov.l 1f,r0 jmp @r0 mov #0,r5 ! writeaccess is unknown - .align 2 + .align 2 1: .long do_address_error restore_all: - cli -#ifdef CONFIG_TRACE_IRQFLAGS - mov.l 1f, r0 - jsr @r0 - nop -#endif + stc sr,r0 + or #0xf0,r0 + ldc r0,sr ! all interrupt block (same BL = 1) + ! restore special register + ! overlap exception frame + mov r15,r0 + add #17*4,r0 + lds.l @r0+,pr + add #4,r0 + ldc.l @r0+,gbr + lds.l @r0+,mach + lds.l @r0+,macl mov r15,r0 mov.l $cpu_mode,r2 mov #OFF_SR,r3 mov.l @(r0,r3),r1 - mov.l r1,@r2 + mov.l __md_bit,r3 + and r1,r3 ! copy MD bit + mov.l r3,@r2 shll2 r1 ! clear MD bit shlr2 r1 mov.l @(OFF_SP,r0),r2 @@ -297,12 +273,6 @@ restore_all: mov #OFF_PC,r3 mov.l @(r0,r3),r1 mov.l r1,@r2 ! set pc - add #4*16+4,r0 - lds.l @r0+,pr - add #4,r0 ! skip sr - ldc.l @r0+,gbr - lds.l @r0+,mach - lds.l @r0+,macl get_current_thread_info r0, r1 mov.l $current_thread_info,r1 mov.l r0,@r1 @@ -326,9 +296,8 @@ restore_all: nop .align 2 -#ifdef CONFIG_TRACE_IRQFLAGS -1: .long trace_hardirqs_off -#endif +__md_bit: + .long 0x40000000 $current_thread_info: .long __current_thread_info $cpu_mode: diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S index 6d285af7846..85b0bf81fc1 100644 --- a/arch/sh/kernel/cpu/sh2/ex.S +++ b/arch/sh/kernel/cpu/sh2/ex.S @@ -18,16 +18,17 @@ exception_entry: no = 0 .rept 256 - mov.l r0,@-sp - mov #no,r0 + mov.l r1,@-sp bra exception_trampoline - and #0xff,r0 + mov #no,r1 no = no + 1 .endr exception_trampoline: - mov.l r1,@-sp - mov.l $exception_handler,r1 - jmp @r1 + mov.l r0,@-sp + mov.l $exception_handler,r0 + extu.b r1,r1 + jmp @r0 + extu.w r1,r1 .align 2 $exception_entry: @@ -41,6 +42,6 @@ $exception_handler: ENTRY(vbr_base) vector = 0 .rept 256 - .long exception_entry + vector * 8 + .long exception_entry + vector * 6 vector = vector + 1 .endr diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index cc530f4d84d..56e5878e551 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -96,8 +96,32 @@ static struct platform_device sci_device = { }, }; +static struct resource eth_resources[] = { + [0] = { + .start = 0xfb000000, + .end = 0xfb0001c8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 85, + .end = 85, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device eth_device = { + .name = "sh-eth", + .id = -1, + .dev = { + .platform_data = (void *)1, + }, + .num_resources = ARRAY_SIZE(eth_resources), + .resource = eth_resources, +}; + static struct platform_device *sh7619_devices[] __initdata = { &sci_device, + ð_device, }; static int __init sh7619_devices_setup(void) diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile index 7e2b90cfa7b..1ab1ecf4c76 100644 --- a/arch/sh/kernel/cpu/sh2a/Makefile +++ b/arch/sh/kernel/cpu/sh2a/Makefile @@ -4,7 +4,7 @@ obj-y := common.o probe.o opcode_helper.o -common-y += $(addprefix ../sh2/, ex.o entry.o) +common-y += ex.o entry.o obj-$(CONFIG_SH_FPU) += fpu.o diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S new file mode 100644 index 00000000000..47096dc3d20 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/entry.S @@ -0,0 +1,249 @@ +/* + * arch/sh/kernel/cpu/sh2a/entry.S + * + * The SH-2A exception entry + * + * Copyright (C) 2008 Yoshinori Sato + * Based on arch/sh/kernel/cpu/sh2/entry.S + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/cpu/mmu_context.h> +#include <asm/unistd.h> +#include <asm/errno.h> +#include <asm/page.h> + +/* Offsets to the stack */ +OFF_R0 = 0 /* Return value. New ABI also arg4 */ +OFF_R1 = 4 /* New ABI: arg5 */ +OFF_R2 = 8 /* New ABI: arg6 */ +OFF_R3 = 12 /* New ABI: syscall_nr */ +OFF_R4 = 16 /* New ABI: arg0 */ +OFF_R5 = 20 /* New ABI: arg1 */ +OFF_R6 = 24 /* New ABI: arg2 */ +OFF_R7 = 28 /* New ABI: arg3 */ +OFF_SP = (15*4) +OFF_PC = (16*4) +OFF_SR = (16*4+2*4) +OFF_TRA = (16*4+6*4) + +#include <asm/entry-macros.S> + +ENTRY(exception_handler) + ! stack + ! r0 <- point sp + ! r1 + ! pc + ! sr + ! r0 = temporary + ! r1 = vector (pseudo EXPEVT / INTEVT / TRA) + mov.l r2,@-sp + cli + mov.l $cpu_mode,r2 + bld.b #6,@(0,r2) !previus SR.MD + bst.b #6,@(4*4,r15) !set cpu mode to SR.MD + bt 1f + ! switch to kernel mode + bset.b #6,@(0,r2) !set SR.MD + mov.l $current_thread_info,r2 + mov.l @r2,r2 + mov #(THREAD_SIZE >> 8),r0 + shll8 r0 + add r2,r0 ! r0 = kernel stack tail + mov r15,r2 ! r2 = user stack top + mov r0,r15 ! switch kernel stack + mov.l r1,@-r15 ! TRA + sts.l macl, @-r15 + sts.l mach, @-r15 + stc.l gbr, @-r15 + mov.l @(4*4,r2),r0 + mov.l r0,@-r15 ! original SR + sts.l pr,@-r15 + mov.l @(3*4,r2),r0 + mov.l r0,@-r15 ! original PC + mov r2,r0 + add #(3+2)*4,r0 ! rewind r0 - r3 + exception frame + lds r0,pr ! pr = original SP + movmu.l r3,@-r15 ! save regs + mov r2,r8 ! r8 = previus stack top + mov r1,r9 ! r9 = interrupt vector + ! restore previous stack + mov.l @r8+,r2 + mov.l @r8+,r0 + mov.l @r8+,r1 + bra 2f + movml.l r2,@-r15 +1: + ! in kernel exception + mov r15,r2 + add #-((OFF_TRA + 4) - OFF_PC) + 5*4,r15 + movmu.l r3,@-r15 + mov r2,r8 ! r8 = previous stack top + mov r1,r9 ! r9 = interrupt vector + ! restore exception frame & regs + mov.l @r8+,r2 ! old R2 + mov.l @r8+,r0 ! old R0 + mov.l @r8+,r1 ! old R1 + mov.l @r8+,r10 ! old PC + mov.l @r8+,r11 ! old SR + movml.l r2,@-r15 + mov.l r10,@(OFF_PC,r15) + mov.l r11,@(OFF_SR,r15) + mov.l r8,@(OFF_SP,r15) ! save old sp + mov r15,r8 + add #OFF_TRA + 4,r8 + mov.l r9,@-r8 + sts.l macl,@-r8 + sts.l mach,@-r8 + stc.l gbr,@-r8 + add #-4,r8 + sts.l pr,@-r8 +2: + ! dispatch exception / interrupt + mov #64,r8 + cmp/hs r8,r9 + bt interrupt_entry ! vec >= 64 is interrupt + mov #32,r8 + cmp/hs r8,r9 + bt trap_entry ! 64 > vec >= 32 is trap + + mov.l 4f,r8 + mov r9,r4 + shll2 r9 + add r9,r8 + mov.l @r8,r8 ! exception handler address + tst r8,r8 + bf 3f + mov.l 8f,r8 ! unhandled exception +3: + mov.l 5f,r10 + jmp @r8 + lds r10,pr + +interrupt_entry: + mov r9,r4 + mov r15,r5 + mov.l 7f,r8 + mov.l 6f,r9 + jmp @r8 + lds r9,pr + + .align 2 +4: .long exception_handling_table +5: .long ret_from_exception +6: .long ret_from_irq +7: .long do_IRQ +8: .long exception_error + +trap_entry: + mov #0x30,r8 + cmp/ge r8,r9 ! vector 0x20-0x2f is systemcall + bt 1f + add #-0x10,r9 ! convert SH2 to SH3/4 ABI +1: + shll2 r9 ! TRA + bra system_call ! jump common systemcall entry + mov r9,r8 + +#if defined(CONFIG_SH_STANDARD_BIOS) + /* Unwind the stack and jmp to the debug entry */ +ENTRY(sh_bios_handler) + mov r15,r0 + add #(22-4)*4-4,r0 + ldc.l @r0+,gbr + lds.l @r0+,mach + lds.l @r0+,macl + mov r15,r0 + mov.l @(OFF_SP,r0),r1 + mov.l @(OFF_SR,r2),r3 + mov.l r3,@-r1 + mov.l @(OFF_SP,r2),r3 + mov.l r3,@-r1 + mov r15,r0 + add #(22-4)*4-8,r0 + mov.l 1f,r2 + mov.l @r2,r2 + stc sr,r3 + mov.l r2,@r0 + mov.l r3,@(4,r0) + mov.l r1,@(8,r0) + movml.l @r15+,r14 + add #8,r15 + lds.l @r15+, pr + rte + mov.l @r15+,r15 + .align 2 +1: .long gdb_vbr_vector +#endif /* CONFIG_SH_STANDARD_BIOS */ + +ENTRY(address_error_trap_handler) + mov r15,r4 ! regs + mov.l @(OFF_PC,r15),r6 ! pc + mov.l 1f,r0 + jmp @r0 + mov #0,r5 ! writeaccess is unknown + + .align 2 +1: .long do_address_error + +restore_all: + stc sr,r0 + or #0xf0,r0 + ldc r0,sr ! all interrupt block (same BL = 1) + ! restore special register + ! overlap exception frame + mov r15,r0 + add #17*4,r0 + lds.l @r0+,pr + add #4,r0 + ldc.l @r0+,gbr + lds.l @r0+,mach + lds.l @r0+,macl + mov r15,r0 + mov.l $cpu_mode,r2 + bld.b #6,@(OFF_SR,r15) + bst.b #6,@(0,r2) ! save CPU mode + mov.l @(OFF_SR,r0),r1 + shll2 r1 + shlr2 r1 ! clear MD bit + mov.l @(OFF_SP,r0),r2 + add #-8,r2 + mov.l r2,@(OFF_SP,r0) ! point exception frame top + mov.l r1,@(4,r2) ! set sr + mov.l @(OFF_PC,r0),r1 + mov.l r1,@r2 ! set pc + get_current_thread_info r0, r1 + mov.l $current_thread_info,r1 + mov.l r0,@r1 + movml.l @r15+,r14 + mov.l @r15,r15 + rte + nop + + .align 2 +$current_thread_info: + .long __current_thread_info +$cpu_mode: + .long __cpu_mode + +! common exception handler +#include "../../entry-common.S" + + .data +! cpu operation mode +! bit30 = MD (compatible SH3/4) +__cpu_mode: + .long 0x40000000 + + .section .bss +__current_thread_info: + .long 0 + +ENTRY(exception_handling_table) + .space 4*32 diff --git a/arch/sh/kernel/cpu/sh2a/ex.S b/arch/sh/kernel/cpu/sh2a/ex.S new file mode 100644 index 00000000000..3ead9e63965 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/ex.S @@ -0,0 +1,72 @@ +/* + * arch/sh/kernel/cpu/sh2a/ex.S + * + * The SH-2A exception vector table + * + * Copyright (C) 2008 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/linkage.h> + +! +! convert Exception Vector to Exception Number +! + +! exception no 0 to 255 +exception_entry0: +no = 0 + .rept 256 + mov.l r1,@-sp + bra exception_trampoline0 + mov #no,r1 +no = no + 1 + .endr +exception_trampoline0: + mov.l r0,@-sp + mov.l 1f,r0 + extu.b r1,r1 + jmp @r0 + extu.w r1,r1 + + .align 2 +1: .long exception_handler + +! exception no 256 to 511 +exception_entry1: +no = 0 + .rept 256 + mov.l r1,@-sp + bra exception_trampoline1 + mov #no,r1 +no = no + 1 + .endr +exception_trampoline1: + mov.l r0,@-sp + extu.b r1,r1 + movi20 #0x100,r0 + add r0,r1 + mov.l 1f,r0 + jmp @r0 + extu.w r1,r1 + + .align 2 +1: .long exception_handler + + ! +! Exception Vector Base +! + .align 2 +ENTRY(vbr_base) +vector = 0 + .rept 256 + .long exception_entry0 + vector * 6 +vector = vector + 1 + .endr + .rept 256 + .long exception_entry1 + vector * 6 +vector = vector + 1 + .endr diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S index 11b6d9c6eda..dac42972689 100644 --- a/arch/sh/kernel/cpu/sh3/ex.S +++ b/arch/sh/kernel/cpu/sh3/ex.S @@ -4,7 +4,7 @@ * The SH-3 and SH-4 exception vector table. * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2003 - 2006 Paul Mundt + * Copyright (C) 2003 - 2008 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -12,13 +12,30 @@ */ #include <linux/linkage.h> +#if !defined(CONFIG_MMU) +#define tlb_miss_load exception_error +#define tlb_miss_store exception_error +#define initial_page_write exception_error +#define tlb_protection_violation_load exception_error +#define tlb_protection_violation_store exception_error +#define address_error_load exception_error +#define address_error_store exception_error +#endif + +#if !defined(CONFIG_SH_FPU) +#define fpu_error_trap_handler exception_error +#endif + +#if !defined(CONFIG_KGDB_NMI) +#define kgdb_handle_exception exception_error +#endif + .align 2 .data ENTRY(exception_handling_table) .long exception_error /* 000 */ .long exception_error -#if defined(CONFIG_MMU) .long tlb_miss_load /* 040 */ .long tlb_miss_store .long initial_page_write @@ -26,30 +43,13 @@ ENTRY(exception_handling_table) .long tlb_protection_violation_store .long address_error_load .long address_error_store /* 100 */ -#else - .long exception_error ! tlb miss load /* 040 */ - .long exception_error ! tlb miss store - .long exception_error ! initial page write - .long exception_error ! tlb prot violation load - .long exception_error ! tlb prot violation store - .long exception_error ! address error load - .long exception_error ! address error store /* 100 */ -#endif -#if defined(CONFIG_SH_FPU) .long fpu_error_trap_handler /* 120 */ -#else - .long exception_error /* 120 */ -#endif .long exception_error /* 140 */ .long system_call ! Unconditional Trap /* 160 */ .long exception_error ! reserved_instruction (filled by trap_init) /* 180 */ .long exception_error ! illegal_slot_instruction (filled by trap_init) /*1A0*/ ENTRY(nmi_slot) -#if defined (CONFIG_KGDB_NMI) .long kgdb_handle_exception /* 1C0 */ ! Allow trap to debugger -#else - .long exception_none /* 1C0 */ ! Not implemented yet -#endif ENTRY(user_break_point_trap) .long break_point_trap /* 1E0 */ diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index be492696918..2e42572b1b1 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -50,14 +50,18 @@ int __init detect_cpu_and_cache_system(void) boot_cpu_data.dcache.ways = 1; boot_cpu_data.dcache.linesz = L1_CACHE_BYTES; + /* We don't know the chip cut */ + boot_cpu_data.cut_major = boot_cpu_data.cut_minor = -1; + /* * Setup some generic flags we can probe on SH-4A parts */ - if (((pvr >> 24) & 0xff) == 0x10) { + if (((pvr >> 16) & 0xff) == 0x10) { if ((cvr & 0x10000000) == 0) boot_cpu_data.flags |= CPU_HAS_DSP; boot_cpu_data.flags |= CPU_HAS_LLSC; + boot_cpu_data.cut_major = pvr & 0x7f; } /* FPU detection works for everyone */ diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index a880e796875..9381ad8da26 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -21,7 +21,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7763) := clock-sh7763.o clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o -clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o +clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7366) := clock-sh7722.o diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c deleted file mode 100644 index 7adc4f16e95..00000000000 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * arch/sh/kernel/cpu/sh4a/clock-sh7343.c - * - * SH7343/SH7722 support for the clock framework - * - * Copyright (C) 2006 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <asm/clock.h> -#include <asm/freq.h> - -/* - * SH7343/SH7722 uses a common set of multipliers and divisors, so this - * is quite simple.. - */ -static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 }; -static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 }; - -#define pll_calc() (((ctrl_inl(FRQCR) >> 24) & 0x1f) + 1) - -static void master_clk_init(struct clk *clk) -{ - clk->parent = clk_get(NULL, "cpu_clk"); -} - -static void master_clk_recalc(struct clk *clk) -{ - int idx = (ctrl_inl(FRQCR) & 0x000f); - clk->rate *= clk->parent->rate * multipliers[idx] / divisors[idx]; -} - -static struct clk_ops sh7343_master_clk_ops = { - .init = master_clk_init, - .recalc = master_clk_recalc, -}; - -static void module_clk_init(struct clk *clk) -{ - clk->parent = NULL; - clk->rate = CONFIG_SH_PCLK_FREQ; -} - -static struct clk_ops sh7343_module_clk_ops = { - .init = module_clk_init, -}; - -static void bus_clk_init(struct clk *clk) -{ - clk->parent = clk_get(NULL, "cpu_clk"); -} - -static void bus_clk_recalc(struct clk *clk) -{ - int idx = (ctrl_inl(FRQCR) >> 8) & 0x000f; - clk->rate = clk->parent->rate * multipliers[idx] / divisors[idx]; -} - -static struct clk_ops sh7343_bus_clk_ops = { - .init = bus_clk_init, - .recalc = bus_clk_recalc, -}; - -static void cpu_clk_init(struct clk *clk) -{ - clk->parent = clk_get(NULL, "module_clk"); - clk->flags |= CLK_RATE_PROPAGATES; - clk_set_rate(clk, clk_get_rate(clk)); -} - -static void cpu_clk_recalc(struct clk *clk) -{ - int idx = (ctrl_inl(FRQCR) >> 20) & 0x000f; - clk->rate = clk->parent->rate * pll_calc() * - multipliers[idx] / divisors[idx]; -} - -static struct clk_ops sh7343_cpu_clk_ops = { - .init = cpu_clk_init, - .recalc = cpu_clk_recalc, -}; - -static struct clk_ops *sh7343_clk_ops[] = { - &sh7343_master_clk_ops, - &sh7343_module_clk_ops, - &sh7343_bus_clk_ops, - &sh7343_cpu_clk_ops, -}; - -void __init arch_init_clk_ops(struct clk_ops **ops, int idx) -{ - if (idx < ARRAY_SIZE(sh7343_clk_ops)) - *ops = sh7343_clk_ops[idx]; -} diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c index 299138ebe16..db913855c2f 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -1,7 +1,7 @@ /* * arch/sh/kernel/cpu/sh4a/clock-sh7722.c * - * SH7722 & SH7366 support for the clock framework + * SH7343, SH7722, SH7723 & SH7366 support for the clock framework * * Copyright (c) 2006-2007 Nomad Global Solutions Inc * Based on code for sh7343 by Paul Mundt @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/io.h> #include <linux/errno.h> +#include <linux/stringify.h> #include <asm/clock.h> #include <asm/freq.h> @@ -411,40 +412,40 @@ static struct clk_ops sh7722_frqcr_clk_ops = { * clock ops methods for SIU A/B and IrDA clock * */ -static int sh7722_siu_which(struct clk *clk) + +#ifndef CONFIG_CPU_SUBTYPE_SH7343 + +static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id) { - if (!strcmp(clk->name, "siu_a_clk")) - return 0; - if (!strcmp(clk->name, "siu_b_clk")) - return 1; -#if defined(CONFIG_CPU_SUBTYPE_SH7722) - if (!strcmp(clk->name, "irda_clk")) - return 2; -#endif - return -EINVAL; + unsigned long r; + int div; + + r = ctrl_inl(clk->arch_flags); + div = sh7722_find_divisors(clk->parent->rate, rate); + if (div < 0) + return div; + r = (r & ~0xF) | div; + ctrl_outl(r, clk->arch_flags); + return 0; } -static unsigned long sh7722_siu_regs[] = { - [0] = SCLKACR, - [1] = SCLKBCR, -#if defined(CONFIG_CPU_SUBTYPE_SH7722) - [2] = IrDACLKCR, -#endif -}; +static void sh7722_siu_recalc(struct clk *clk) +{ + unsigned long r; + + r = ctrl_inl(clk->arch_flags); + clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF]; +} static int sh7722_siu_start_stop(struct clk *clk, int enable) { - int siu = sh7722_siu_which(clk); unsigned long r; - if (siu < 0) - return siu; - BUG_ON(siu > 2); - r = ctrl_inl(sh7722_siu_regs[siu]); + r = ctrl_inl(clk->arch_flags); if (enable) - ctrl_outl(r & ~(1 << 8), sh7722_siu_regs[siu]); + ctrl_outl(r & ~(1 << 8), clk->arch_flags); else - ctrl_outl(r | (1 << 8), sh7722_siu_regs[siu]); + ctrl_outl(r | (1 << 8), clk->arch_flags); return 0; } @@ -458,6 +459,15 @@ static void sh7722_siu_disable(struct clk *clk) sh7722_siu_start_stop(clk, 0); } +static struct clk_ops sh7722_siu_clk_ops = { + .recalc = sh7722_siu_recalc, + .set_rate = sh7722_siu_set_rate, + .enable = sh7722_siu_enable, + .disable = sh7722_siu_disable, +}; + +#endif /* CONFIG_CPU_SUBTYPE_SH7343 */ + static void sh7722_video_enable(struct clk *clk) { unsigned long r; @@ -494,43 +504,6 @@ static void sh7722_video_recalc(struct clk *clk) clk->rate = clk->parent->rate / ((r & 0x3F) + 1); } -static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id) -{ - int siu = sh7722_siu_which(clk); - unsigned long r; - int div; - - if (siu < 0) - return siu; - BUG_ON(siu > 2); - r = ctrl_inl(sh7722_siu_regs[siu]); - div = sh7722_find_divisors(clk->parent->rate, rate); - if (div < 0) - return div; - r = (r & ~0xF) | div; - ctrl_outl(r, sh7722_siu_regs[siu]); - return 0; -} - -static void sh7722_siu_recalc(struct clk *clk) -{ - int siu = sh7722_siu_which(clk); - unsigned long r; - - if (siu < 0) - return /* siu */ ; - BUG_ON(siu > 2); - r = ctrl_inl(sh7722_siu_regs[siu]); - clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF]; -} - -static struct clk_ops sh7722_siu_clk_ops = { - .recalc = sh7722_siu_recalc, - .set_rate = sh7722_siu_set_rate, - .enable = sh7722_siu_enable, - .disable = sh7722_siu_disable, -}; - static struct clk_ops sh7722_video_clk_ops = { .recalc = sh7722_video_recalc, .set_rate = sh7722_video_set_rate, @@ -560,6 +533,9 @@ static struct clk sh7722_sdram_clock = { .ops = &sh7722_frqcr_clk_ops, }; + +#ifndef CONFIG_CPU_SUBTYPE_SH7343 + /* * these three clocks - SIU A, SIU B, IrDA - share the same clk_ops * methods of clk_ops determine which register they should access by @@ -567,36 +543,151 @@ static struct clk sh7722_sdram_clock = { */ static struct clk sh7722_siu_a_clock = { .name = "siu_a_clk", + .arch_flags = SCLKACR, .ops = &sh7722_siu_clk_ops, }; static struct clk sh7722_siu_b_clock = { .name = "siu_b_clk", + .arch_flags = SCLKBCR, .ops = &sh7722_siu_clk_ops, }; #if defined(CONFIG_CPU_SUBTYPE_SH7722) static struct clk sh7722_irda_clock = { .name = "irda_clk", + .arch_flags = IrDACLKCR, .ops = &sh7722_siu_clk_ops, }; #endif +#endif /* CONFIG_CPU_SUBTYPE_SH7343 */ static struct clk sh7722_video_clock = { .name = "video_clk", .ops = &sh7722_video_clk_ops, }; +static int sh7722_mstpcr_start_stop(struct clk *clk, unsigned long reg, + int enable) +{ + unsigned long bit = clk->arch_flags; + unsigned long r; + + r = ctrl_inl(reg); + + if (enable) + r &= ~(1 << bit); + else + r |= (1 << bit); + + ctrl_outl(r, reg); + return 0; +} + +static void sh7722_mstpcr0_enable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR0, 1); +} + +static void sh7722_mstpcr0_disable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR0, 0); +} + +static void sh7722_mstpcr1_enable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR1, 1); +} + +static void sh7722_mstpcr1_disable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR1, 0); +} + +static void sh7722_mstpcr2_enable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR2, 1); +} + +static void sh7722_mstpcr2_disable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR2, 0); +} + +static struct clk_ops sh7722_mstpcr0_clk_ops = { + .enable = sh7722_mstpcr0_enable, + .disable = sh7722_mstpcr0_disable, +}; + +static struct clk_ops sh7722_mstpcr1_clk_ops = { + .enable = sh7722_mstpcr1_enable, + .disable = sh7722_mstpcr1_disable, +}; + +static struct clk_ops sh7722_mstpcr2_clk_ops = { + .enable = sh7722_mstpcr2_enable, + .disable = sh7722_mstpcr2_disable, +}; + +#define DECLARE_MSTPCRN(regnr, bitnr, bitstr) \ +{ \ + .name = "mstp" __stringify(regnr) bitstr, \ + .arch_flags = bitnr, \ + .ops = &sh7722_mstpcr ## regnr ## _clk_ops, \ +} + +#define DECLARE_MSTPCR(regnr) \ + DECLARE_MSTPCRN(regnr, 31, "31"), \ + DECLARE_MSTPCRN(regnr, 30, "30"), \ + DECLARE_MSTPCRN(regnr, 29, "29"), \ + DECLARE_MSTPCRN(regnr, 28, "28"), \ + DECLARE_MSTPCRN(regnr, 27, "27"), \ + DECLARE_MSTPCRN(regnr, 26, "26"), \ + DECLARE_MSTPCRN(regnr, 25, "25"), \ + DECLARE_MSTPCRN(regnr, 24, "24"), \ + DECLARE_MSTPCRN(regnr, 23, "23"), \ + DECLARE_MSTPCRN(regnr, 22, "22"), \ + DECLARE_MSTPCRN(regnr, 21, "21"), \ + DECLARE_MSTPCRN(regnr, 20, "20"), \ + DECLARE_MSTPCRN(regnr, 19, "19"), \ + DECLARE_MSTPCRN(regnr, 18, "18"), \ + DECLARE_MSTPCRN(regnr, 17, "17"), \ + DECLARE_MSTPCRN(regnr, 16, "16"), \ + DECLARE_MSTPCRN(regnr, 15, "15"), \ + DECLARE_MSTPCRN(regnr, 14, "14"), \ + DECLARE_MSTPCRN(regnr, 13, "13"), \ + DECLARE_MSTPCRN(regnr, 12, "12"), \ + DECLARE_MSTPCRN(regnr, 11, "11"), \ + DECLARE_MSTPCRN(regnr, 10, "10"), \ + DECLARE_MSTPCRN(regnr, 9, "09"), \ + DECLARE_MSTPCRN(regnr, 8, "08"), \ + DECLARE_MSTPCRN(regnr, 7, "07"), \ + DECLARE_MSTPCRN(regnr, 6, "06"), \ + DECLARE_MSTPCRN(regnr, 5, "05"), \ + DECLARE_MSTPCRN(regnr, 4, "04"), \ + DECLARE_MSTPCRN(regnr, 3, "03"), \ + DECLARE_MSTPCRN(regnr, 2, "02"), \ + DECLARE_MSTPCRN(regnr, 1, "01"), \ + DECLARE_MSTPCRN(regnr, 0, "00") + +static struct clk sh7722_mstpcr[] = { + DECLARE_MSTPCR(0), + DECLARE_MSTPCR(1), + DECLARE_MSTPCR(2), +}; + static struct clk *sh7722_clocks[] = { &sh7722_umem_clock, &sh7722_sh_clock, &sh7722_peripheral_clock, &sh7722_sdram_clock, +#ifndef CONFIG_CPU_SUBTYPE_SH7343 &sh7722_siu_a_clock, &sh7722_siu_b_clock, #if defined(CONFIG_CPU_SUBTYPE_SH7722) &sh7722_irda_clock, #endif +#endif &sh7722_video_clock, }; @@ -629,5 +720,11 @@ int __init arch_clk_init(void) clk_register(sh7722_clocks[i]); } clk_put(master); + + for (i = 0; i < ARRAY_SIZE(sh7722_mstpcr); i++) { + pr_debug( "Registering mstpcr '%s'\n", sh7722_mstpcr[i].name); + clk_register(&sh7722_mstpcr[i]); + } + return 0; } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 6d4f50cd4aa..78881b4214d 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -11,6 +11,104 @@ #include <linux/init.h> #include <linux/serial.h> #include <linux/serial_sci.h> +#include <linux/uio_driver.h> +#include <asm/clock.h> + +static struct resource iic0_resources[] = { + [0] = { + .name = "IIC0", + .start = 0x04470000, + .end = 0x04470017, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 96, + .end = 99, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic0_device = { + .name = "i2c-sh_mobile", + .num_resources = ARRAY_SIZE(iic0_resources), + .resource = iic0_resources, +}; + +static struct resource iic1_resources[] = { + [0] = { + .name = "IIC1", + .start = 0x04750000, + .end = 0x04750017, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 44, + .end = 47, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic1_device = { + .name = "i2c-sh_mobile", + .num_resources = ARRAY_SIZE(iic1_resources), + .resource = iic1_resources, +}; + +static struct uio_info vpu_platform_data = { + .name = "VPU4", + .version = "0", + .irq = 60, +}; + +static struct resource vpu_resources[] = { + [0] = { + .name = "VPU", + .start = 0xfe900000, + .end = 0xfe9022eb, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device vpu_device = { + .name = "uio_pdrv_genirq", + .id = 0, + .dev = { + .platform_data = &vpu_platform_data, + }, + .resource = vpu_resources, + .num_resources = ARRAY_SIZE(vpu_resources), +}; + +static struct uio_info veu_platform_data = { + .name = "VEU", + .version = "0", + .irq = 54, +}; + +static struct resource veu_resources[] = { + [0] = { + .name = "VEU", + .start = 0xfe920000, + .end = 0xfe9200b7, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device veu_device = { + .name = "uio_pdrv_genirq", + .id = 1, + .dev = { + .platform_data = &veu_platform_data, + }, + .resource = veu_resources, + .num_resources = ARRAY_SIZE(veu_resources), +}; static struct plat_sci_port sci_platform_data[] = { { @@ -32,16 +130,171 @@ static struct platform_device sci_device = { }; static struct platform_device *sh7343_devices[] __initdata = { + &iic0_device, + &iic1_device, &sci_device, + &vpu_device, + &veu_device, }; static int __init sh7343_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp028"); /* URAM */ + clk_always_enable("mstp026"); /* XYMEM */ + clk_always_enable("mstp023"); /* INTC3 */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp109"); /* I2C0 */ + clk_always_enable("mstp108"); /* I2C1 */ + clk_always_enable("mstp202"); /* VEU */ + clk_always_enable("mstp201"); /* VPU */ + + platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20); + platform_resource_setup_memory(&veu_device, "veu", 2 << 20); + return platform_add_devices(sh7343_devices, ARRAY_SIZE(sh7343_devices)); } __initcall(sh7343_devices_setup); +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + DMAC0, DMAC1, DMAC2, DMAC3, + VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU, + MFI, VPU, TPU, Z3D4, USBI0, USBI1, + MMC_ERR, MMC_TRAN, MMC_FSTAT, MMC_FRDY, + DMAC4, DMAC5, DMAC_DADERR, + KEYSC, + SCIF, SCIF1, SCIF2, SCIF3, SCIF4, + SIOF0, SIOF1, SIO, + FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, + I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI, + I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI, + SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, + IRDA, + SDHI0, SDHI1, SDHI2, SDHI3, + CMT, TSIF, SIU, + TMU0, TMU1, TMU2, + JPU, LCDC, + + /* interrupt groups */ + + DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C0, I2C1, SIM, SDHI, USB, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), + INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), + INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0), + INTC_VECT(I2C1_ALI, 0x780), INTC_VECT(I2C1_TACKI, 0x7a0), + INTC_VECT(I2C1_WAITI, 0x7c0), INTC_VECT(I2C1_DTEI, 0x7e0), + INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820), + INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860), + INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0), + INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0), + INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980), + INTC_VECT(TPU, 0x9a0), INTC_VECT(Z3D4, 0x9e0), + INTC_VECT(USBI0, 0xa20), INTC_VECT(USBI1, 0xa40), + INTC_VECT(MMC_ERR, 0xb00), INTC_VECT(MMC_TRAN, 0xb20), + INTC_VECT(MMC_FSTAT, 0xb40), INTC_VECT(MMC_FRDY, 0xb60), + INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0), + INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0), + INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIF1, 0xc20), + INTC_VECT(SCIF2, 0xc40), INTC_VECT(SCIF3, 0xc60), + INTC_VECT(SIOF0, 0xc80), INTC_VECT(SIOF1, 0xca0), + INTC_VECT(SIO, 0xd00), + INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0), + INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0), + INTC_VECT(I2C0_ALI, 0xe00), INTC_VECT(I2C0_TACKI, 0xe20), + INTC_VECT(I2C0_WAITI, 0xe40), INTC_VECT(I2C0_DTEI, 0xe60), + INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0), + INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0), + INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20), + INTC_VECT(SIU, 0xf80), + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2, 0x440), + INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3), + INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU), + INTC_GROUP(MMC, MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR), + INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR), + INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI, + FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), + INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI), + INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI), + INTC_GROUP(SIM, SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI), + INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3), + INTC_GROUP(USB, USBI0, USBI1), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */ + { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } }, + { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */ + { 0, 0, 0, VPU, 0, 0, 0, MFI } }, + { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */ + { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } }, + { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */ + { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } }, + { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */ + { KEYSC, DMAC_DADERR, DMAC5, DMAC4, SCIF3, SCIF2, SCIF1, SCIF } }, + { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */ + { 0, 0, 0, SIO, Z3D4, 0, SIOF1, SIOF0 } }, + { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */ + { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI, + FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } }, + { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */ + { SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } }, + { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */ + { 0, 0, 0, CMT, 0, USBI1, USBI0 } }, + { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */ + { MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR } }, + { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */ + { I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI, TPU, 0, 0, TSIF } }, + { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } }, + { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } }, + { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } }, + { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } }, + { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIF1, SCIF2, SCIF3 } }, + { 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C0 } }, + { 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, I2C1 } }, + { 0xa4080024, 0, 16, 4, /* IPRJ */ { Z3D4, 0, SIU } }, + { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } }, + { 0xa408002c, 0, 16, 4, /* IPRL */ { 0, 0, TPU } }, + { 0xa4140010, 0, 32, 4, /* INTPRI00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_sense_reg sense_registers[] __initdata = { + { 0xa414001c, 16, 2, /* ICR1 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7343", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); + void __init plat_irq_setup(void) { + register_intc_controller(&intc_desc); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index f26b5cdad0d..6851dba02f3 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -13,6 +13,112 @@ #include <linux/init.h> #include <linux/serial.h> #include <linux/serial_sci.h> +#include <linux/uio_driver.h> +#include <asm/clock.h> + +static struct resource iic_resources[] = { + [0] = { + .name = "IIC", + .start = 0x04470000, + .end = 0x04470017, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 96, + .end = 99, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic_device = { + .name = "i2c-sh_mobile", + .num_resources = ARRAY_SIZE(iic_resources), + .resource = iic_resources, +}; + +static struct uio_info vpu_platform_data = { + .name = "VPU5", + .version = "0", + .irq = 60, +}; + +static struct resource vpu_resources[] = { + [0] = { + .name = "VPU", + .start = 0xfe900000, + .end = 0xfe902807, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device vpu_device = { + .name = "uio_pdrv_genirq", + .id = 0, + .dev = { + .platform_data = &vpu_platform_data, + }, + .resource = vpu_resources, + .num_resources = ARRAY_SIZE(vpu_resources), +}; + +static struct uio_info veu0_platform_data = { + .name = "VEU", + .version = "0", + .irq = 54, +}; + +static struct resource veu0_resources[] = { + [0] = { + .name = "VEU(1)", + .start = 0xfe920000, + .end = 0xfe9200b7, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device veu0_device = { + .name = "uio_pdrv_genirq", + .id = 1, + .dev = { + .platform_data = &veu0_platform_data, + }, + .resource = veu0_resources, + .num_resources = ARRAY_SIZE(veu0_resources), +}; + +static struct uio_info veu1_platform_data = { + .name = "VEU", + .version = "0", + .irq = 27, +}; + +static struct resource veu1_resources[] = { + [0] = { + .name = "VEU(2)", + .start = 0xfe924000, + .end = 0xfe9240b7, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device veu1_device = { + .name = "uio_pdrv_genirq", + .id = 2, + .dev = { + .platform_data = &veu1_platform_data, + }, + .resource = veu1_resources, + .num_resources = ARRAY_SIZE(veu1_resources), +}; static struct plat_sci_port sci_platform_data[] = { { @@ -34,11 +140,32 @@ static struct platform_device sci_device = { }; static struct platform_device *sh7366_devices[] __initdata = { + &iic_device, &sci_device, + &vpu_device, + &veu0_device, + &veu1_device, }; static int __init sh7366_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp028"); /* RSMEM */ + clk_always_enable("mstp026"); /* XYMEM */ + clk_always_enable("mstp023"); /* INTC3 */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp109"); /* I2C */ + clk_always_enable("mstp207"); /* VEU-2 */ + clk_always_enable("mstp202"); /* VEU-1 */ + clk_always_enable("mstp201"); /* VPU */ + + platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20); + platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20); + platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20); + return platform_add_devices(sh7366_devices, ARRAY_SIZE(sh7366_devices)); } @@ -97,7 +224,7 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(SIU, 0xf80), INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), INTC_VECT(TMU2, 0x440), - INTC_VECT(VEU2, 0x580), INTC_VECT(LCDC, 0x580), + INTC_VECT(VEU2, 0x560), INTC_VECT(LCDC, 0x580), }; static struct intc_group groups[] __initdata = { @@ -163,8 +290,14 @@ static struct intc_sense_reg sense_registers[] __initdata = { { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7366", vectors, groups, - mask_registers, prio_registers, sense_registers); +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7366", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 62ebccf18b3..de1ede92176 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -12,6 +12,8 @@ #include <linux/serial.h> #include <linux/serial_sci.h> #include <linux/mm.h> +#include <linux/uio_driver.h> +#include <asm/clock.h> #include <asm/mmzone.h> static struct resource usbf_resources[] = { @@ -59,6 +61,62 @@ static struct platform_device iic_device = { .resource = iic_resources, }; +static struct uio_info vpu_platform_data = { + .name = "VPU4", + .version = "0", + .irq = 60, +}; + +static struct resource vpu_resources[] = { + [0] = { + .name = "VPU", + .start = 0xfe900000, + .end = 0xfe9022eb, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device vpu_device = { + .name = "uio_pdrv_genirq", + .id = 0, + .dev = { + .platform_data = &vpu_platform_data, + }, + .resource = vpu_resources, + .num_resources = ARRAY_SIZE(vpu_resources), +}; + +static struct uio_info veu_platform_data = { + .name = "VEU", + .version = "0", + .irq = 54, +}; + +static struct resource veu_resources[] = { + [0] = { + .name = "VEU", + .start = 0xfe920000, + .end = 0xfe9200b7, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device veu_device = { + .name = "uio_pdrv_genirq", + .id = 1, + .dev = { + .platform_data = &veu_platform_data, + }, + .resource = veu_resources, + .num_resources = ARRAY_SIZE(veu_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -95,10 +153,27 @@ static struct platform_device *sh7722_devices[] __initdata = { &usbf_device, &iic_device, &sci_device, + &vpu_device, + &veu_device, }; static int __init sh7722_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp028"); /* URAM */ + clk_always_enable("mstp026"); /* XYMEM */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp109"); /* I2C */ + clk_always_enable("mstp211"); /* USB */ + clk_always_enable("mstp202"); /* VEU */ + clk_always_enable("mstp201"); /* VPU */ + + platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20); + platform_resource_setup_memory(&veu_device, "veu", 2 << 20); + return platform_add_devices(sh7722_devices, ARRAY_SIZE(sh7722_devices)); } @@ -229,8 +304,14 @@ static struct intc_sense_reg sense_registers[] __initdata = { { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7722", vectors, groups, - mask_registers, prio_registers, sense_registers); +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7722", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index a0470f2f547..cd6baffdc89 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -12,8 +12,94 @@ #include <linux/serial.h> #include <linux/mm.h> #include <linux/serial_sci.h> +#include <linux/uio_driver.h> +#include <asm/clock.h> #include <asm/mmzone.h> +static struct uio_info vpu_platform_data = { + .name = "VPU5", + .version = "0", + .irq = 60, +}; + +static struct resource vpu_resources[] = { + [0] = { + .name = "VPU", + .start = 0xfe900000, + .end = 0xfe902807, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device vpu_device = { + .name = "uio_pdrv_genirq", + .id = 0, + .dev = { + .platform_data = &vpu_platform_data, + }, + .resource = vpu_resources, + .num_resources = ARRAY_SIZE(vpu_resources), +}; + +static struct uio_info veu0_platform_data = { + .name = "VEU", + .version = "0", + .irq = 54, +}; + +static struct resource veu0_resources[] = { + [0] = { + .name = "VEU2H0", + .start = 0xfe920000, + .end = 0xfe92027b, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device veu0_device = { + .name = "uio_pdrv_genirq", + .id = 1, + .dev = { + .platform_data = &veu0_platform_data, + }, + .resource = veu0_resources, + .num_resources = ARRAY_SIZE(veu0_resources), +}; + +static struct uio_info veu1_platform_data = { + .name = "VEU", + .version = "0", + .irq = 27, +}; + +static struct resource veu1_resources[] = { + [0] = { + .name = "VEU2H1", + .start = 0xfe924000, + .end = 0xfe92427b, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device veu1_device = { + .name = "uio_pdrv_genirq", + .id = 2, + .dev = { + .platform_data = &veu1_platform_data, + }, + .resource = veu1_resources, + .num_resources = ARRAY_SIZE(veu1_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -113,14 +199,56 @@ static struct platform_device sh7723_usb_host_device = { .resource = sh7723_usb_host_resources, }; +static struct resource iic_resources[] = { + [0] = { + .name = "IIC", + .start = 0x04470000, + .end = 0x04470017, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 96, + .end = 99, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic_device = { + .name = "i2c-sh_mobile", + .num_resources = ARRAY_SIZE(iic_resources), + .resource = iic_resources, +}; + static struct platform_device *sh7723_devices[] __initdata = { &sci_device, &rtc_device, + &iic_device, &sh7723_usb_host_device, + &vpu_device, + &veu0_device, + &veu1_device, }; static int __init sh7723_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp024"); /* FPU */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp000"); /* MERAM */ + clk_always_enable("mstp109"); /* I2C */ + clk_always_enable("mstp108"); /* RTC */ + clk_always_enable("mstp211"); /* USB */ + clk_always_enable("mstp206"); /* VEU2H1 */ + clk_always_enable("mstp202"); /* VEU2H0 */ + clk_always_enable("mstp201"); /* VPU */ + + platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20); + platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20); + platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20); + return platform_add_devices(sh7723_devices, ARRAY_SIZE(sh7723_devices)); } @@ -326,8 +454,14 @@ static struct intc_sense_reg sense_registers[] __initdata = { { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7723", vectors, groups, - mask_registers, prio_registers, sense_registers); +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7723", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index f189a559462..3c5b629887a 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -3,6 +3,7 @@ * * Copyright (C) 2006 Paul Mundt * Copyright (C) 2007 Yoshihiro Shimoda + * Copyright (C) 2008 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -56,6 +57,11 @@ static struct plat_sci_port sci_platform_data[] = { .type = PORT_SCIF, .irqs = { 76, 77, 79, 78 }, }, { + .mapbase = 0xffe10000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 104, 105, 107, 106 }, + }, { .flags = 0, } }; @@ -208,8 +214,8 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60), INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0), INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0), - INTC_VECT(SCIF1_ERI, 0xf00), INTC_VECT(SCIF1_RXI, 0xf20), - INTC_VECT(SCIF1_BRI, 0xf40), INTC_VECT(SCIF1_TXI, 0xf60), + INTC_VECT(SCIF2_ERI, 0xf00), INTC_VECT(SCIF2_RXI, 0xf20), + INTC_VECT(SCIF2_BRI, 0xf40), INTC_VECT(SCIF2_TXI, 0xf60), INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0), INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0), }; @@ -290,9 +296,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = { IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors, - NULL, irq_mask_registers, irq_prio_registers, - irq_sense_registers); +static struct intc_mask_reg irq_ack_registers[] __initdata = { + { 0xffd00024, 0, 32, /* INTREQ */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7763-irq", irq_vectors, + NULL, irq_mask_registers, irq_prio_registers, + irq_sense_registers, irq_ack_registers); /* External interrupt pins in IRL mode */ diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index 18dbbe23fea..fb8200cc744 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -217,9 +217,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = { IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_irq_desc, "sh7780-irq", irq_vectors, - NULL, irq_mask_registers, irq_prio_registers, - irq_sense_registers); +static struct intc_mask_reg irq_ack_registers[] __initdata = { + { 0xffd00024, 0, 32, /* INTREQ */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7780-irq", irq_vectors, + NULL, irq_mask_registers, irq_prio_registers, + irq_sense_registers, irq_ack_registers); /* External interrupt pins in IRL mode */ diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index 621e7329ec6..30baa63b24c 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -238,13 +238,18 @@ static struct intc_sense_reg sense_registers[] __initdata = { IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc_irq0123, "sh7785-irq0123", vectors_irq0123, - NULL, mask_registers, prio_registers, - sense_registers); +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xffd00024, 0, 32, /* INTREQ */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7785-irq0123", + vectors_irq0123, NULL, mask_registers, + prio_registers, sense_registers, ack_registers); -static DECLARE_INTC_DESC(intc_desc_irq4567, "sh7785-irq4567", vectors_irq4567, - NULL, mask_registers, prio_registers, - sense_registers); +static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7785-irq4567", + vectors_irq4567, NULL, mask_registers, + prio_registers, sense_registers, ack_registers); /* External interrupt pins in IRL mode */ diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index 718bd2356b3..5e0dd193384 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -192,7 +192,7 @@ work_resched: .align 2 1: .long schedule 2: .long do_notify_resume -3: .long restore_all +3: .long resume_userspace #ifdef CONFIG_TRACE_IRQFLAGS 4: .long trace_hardirqs_on 5: .long trace_hardirqs_off diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c index 5c17de51987..ec1eadce4aa 100644 --- a/arch/sh/kernel/machine_kexec.c +++ b/arch/sh/kernel/machine_kexec.c @@ -70,7 +70,7 @@ static void kexec_info(struct kimage *image) * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. */ -NORET_TYPE void machine_kexec(struct kimage *image) +void machine_kexec(struct kimage *image) { unsigned long page_list; diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index 921892c351d..3326a45749d 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -34,18 +34,6 @@ void (*pm_idle)(void); void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); -void disable_hlt(void) -{ - hlt_counter++; -} -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; -} -EXPORT_SYMBOL(enable_hlt); - static int __init nohlt_setup(char *__unused) { hlt_counter = 1; @@ -60,7 +48,7 @@ static int __init hlt_setup(char *__unused) } __setup("hlt", hlt_setup); -void default_idle(void) +static void default_idle(void) { if (!hlt_counter) { clear_thread_flag(TIF_POLLING_NRFLAG); diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 0283d813307..b9dbd2d3b4a 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -36,16 +36,6 @@ static int hlt_counter = 1; #define HARD_IDLE_TIMEOUT (HZ / 3) -void disable_hlt(void) -{ - hlt_counter++; -} - -void enable_hlt(void) -{ - hlt_counter--; -} - static int __init nohlt_setup(char *__unused) { hlt_counter = 1; diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index fddb547f3c2..2bc72def5cf 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -241,6 +241,29 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } #endif +#ifdef CONFIG_BINFMT_ELF_FDPIC + case PTRACE_GETFDPIC: { + unsigned long tmp = 0; + + switch (addr) { + case PTRACE_GETFDPIC_EXEC: + tmp = child->mm->context.exec_fdpic_loadmap; + break; + case PTRACE_GETFDPIC_INTERP: + tmp = child->mm->context.interp_fdpic_loadmap; + break; + default: + break; + } + + ret = 0; + if (put_user(tmp, (unsigned long *) data)) { + ret = -EFAULT; + break; + } + break; + } +#endif default: ret = ptrace_request(child, request, addr, data); break; diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index bca2bbc575d..6339d0c9571 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -398,6 +398,7 @@ const char *get_cpu_subtype(struct sh_cpuinfo *c) { return cpu_name[c->type]; } +EXPORT_SYMBOL(get_cpu_subtype); #ifdef CONFIG_PROC_FS /* Symbolic CPU flags, keep in sync with asm/cpu-features.h */ @@ -452,6 +453,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "processor\t: %d\n", cpu); seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine); seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c)); + if (c->cut_major == -1) + seq_printf(m, "cut\t\t: unknown\n"); + else if (c->cut_minor == -1) + seq_printf(m, "cut\t\t: %d.x\n", c->cut_major); + else + seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor); show_cpuflags(m, c); diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c index f311551d9a0..4bbbde895a5 100644 --- a/arch/sh/kernel/signal_32.c +++ b/arch/sh/kernel/signal_32.c @@ -33,6 +33,11 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) +struct fdpic_func_descriptor { + unsigned long text; + unsigned long GOT; +}; + /* * Atomically swap in the new signal mask, and wait for a signal. */ @@ -368,6 +373,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, err |= __put_user(OR_R0_R0, &frame->retcode[6]); err |= __put_user((__NR_sigreturn), &frame->retcode[7]); regs->pr = (unsigned long) frame->retcode; + flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode)); } if (err) @@ -378,18 +384,21 @@ static int setup_frame(int sig, struct k_sigaction *ka, regs->regs[4] = signal; /* Arg for signal handler */ regs->regs[5] = 0; regs->regs[6] = (unsigned long) &frame->sc; - regs->pc = (unsigned long) ka->sa.sa_handler; + + if (current->personality & FDPIC_FUNCPTRS) { + struct fdpic_func_descriptor __user *funcptr = + (struct fdpic_func_descriptor __user *)ka->sa.sa_handler; + + __get_user(regs->pc, &funcptr->text); + __get_user(regs->regs[12], &funcptr->GOT); + } else + regs->pc = (unsigned long)ka->sa.sa_handler; set_fs(USER_DS); pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", current->comm, task_pid_nr(current), frame, regs->pc, regs->pr); - flush_cache_sigtramp(regs->pr); - - if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode)) - flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES); - return 0; give_sigsegv: @@ -458,17 +467,22 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, regs->regs[4] = signal; /* Arg for signal handler */ regs->regs[5] = (unsigned long) &frame->info; regs->regs[6] = (unsigned long) &frame->uc; - regs->pc = (unsigned long) ka->sa.sa_handler; + + if (current->personality & FDPIC_FUNCPTRS) { + struct fdpic_func_descriptor __user *funcptr = + (struct fdpic_func_descriptor __user *)ka->sa.sa_handler; + + __get_user(regs->pc, &funcptr->text); + __get_user(regs->regs[12], &funcptr->GOT); + } else + regs->pc = (unsigned long)ka->sa.sa_handler; set_fs(USER_DS); pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", current->comm, task_pid_nr(current), frame, regs->pc, regs->pr); - flush_cache_sigtramp(regs->pr); - - if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode)) - flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES); + flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode)); return 0; diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index a46cc3a4114..0af693e6576 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -343,3 +343,9 @@ ENTRY(sys_call_table) .long sys_fallocate .long sys_timerfd_settime /* 325 */ .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 /* 330 */ + .long sys_pipe2 + .long sys_inotify_init1 diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index d5d7843aad9..0b436aa3cad 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -381,3 +381,9 @@ sys_call_table: .long sys_fallocate .long sys_timerfd_settime .long sys_timerfd_gettime + .long sys_signalfd4 /* 355 */ + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 + .long sys_pipe2 + .long sys_inotify_init1 /* 360 */ diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c index 7281342c044..0758b5ee818 100644 --- a/arch/sh/kernel/time_32.c +++ b/arch/sh/kernel/time_32.c @@ -211,7 +211,7 @@ unsigned long sh_hpt_frequency = 0; #define NSEC_PER_CYC_SHIFT 10 -struct clocksource clocksource_sh = { +static struct clocksource clocksource_sh = { .name = "SuperH", .rating = 200, .mask = CLOCKSOURCE_MASK(32), diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 8935570008d..1ca9ad49b54 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -209,7 +209,7 @@ static int tmu_timer_init(void) return 0; } -struct sys_timer_ops tmu_timer_ops = { +static struct sys_timer_ops tmu_timer_ops = { .init = tmu_timer_init, .start = tmu_timer_start, .stop = tmu_timer_stop, diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c index e08b3bfeb65..511a9426cec 100644 --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -43,6 +43,7 @@ # define TRAP_ILLEGAL_SLOT_INST 6 # define TRAP_ADDRESS_ERROR 9 # ifdef CONFIG_CPU_SH2A +# define TRAP_FPU_ERROR 13 # define TRAP_DIVZERO_ERROR 17 # define TRAP_DIVOVF_ERROR 18 # endif @@ -851,6 +852,9 @@ void __init trap_init(void) #ifdef CONFIG_CPU_SH2A set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error); set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error); +#ifdef CONFIG_SH_FPU + set_exception_table_vec(TRAP_FPU_ERROR, fpu_error_trap_handler); +#endif #endif /* Setup VBR for boot cpu */ diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile index ebb55d1149f..8596cc78e18 100644 --- a/arch/sh/lib/Makefile +++ b/arch/sh/lib/Makefile @@ -2,9 +2,11 @@ # Makefile for SuperH-specific library files.. # -lib-y = delay.o io.o memset.o memmove.o memchr.o \ +lib-y = delay.o memset.o memmove.o memchr.o \ checksum.o strlen.o div64.o div64-generic.o +obj-y += io.o + memcpy-y := memcpy.o memcpy-$(CONFIG_CPU_SH4) := memcpy-sh4.o diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 5fd218430b1..56d0a7daa34 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -145,25 +145,39 @@ choice config PAGE_SIZE_4KB bool "4kB" - depends on !X2TLB + depends on !MMU || !X2TLB help This is the default page size used by all SuperH CPUs. config PAGE_SIZE_8KB bool "8kB" - depends on X2TLB + depends on !MMU || X2TLB help This enables 8kB pages as supported by SH-X2 and later MMUs. +config PAGE_SIZE_16KB + bool "16kB" + depends on !MMU + help + This enables 16kB pages on MMU-less SH systems. + config PAGE_SIZE_64KB bool "64kB" - depends on CPU_SH4 || CPU_SH5 + depends on !MMU || CPU_SH4 || CPU_SH5 help This enables support for 64kB pages, possible on all SH-4 CPUs and later. endchoice +config ENTRY_OFFSET + hex + default "0x00001000" if PAGE_SIZE_4KB + default "0x00002000" if PAGE_SIZE_8KB + default "0x00004000" if PAGE_SIZE_16KB + default "0x00010000" if PAGE_SIZE_64KB + default "0x00000000" + choice prompt "HugeTLB page size" depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c index c5b56d52b7d..0e189ccd4a7 100644 --- a/arch/sh/mm/cache-debugfs.c +++ b/arch/sh/mm/cache-debugfs.c @@ -120,7 +120,7 @@ static const struct file_operations cache_debugfs_fops = { .open = cache_debugfs_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = single_release, }; static int __init cache_debugfs_init(void) diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 43d7ff6b6ec..1fdc8d90254 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -4,6 +4,7 @@ * Copyright (C) 1999, 2000, 2002 Niibe Yutaka * Copyright (C) 2001 - 2007 Paul Mundt * Copyright (C) 2003 Richard Curnow + * Copyright (c) 2007 STMicroelectronics (R&D) Ltd. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -22,6 +23,7 @@ * entirety. */ #define MAX_DCACHE_PAGES 64 /* XXX: Tune for ways */ +#define MAX_ICACHE_PAGES 32 static void __flush_dcache_segment_1way(unsigned long start, unsigned long extent); @@ -178,42 +180,45 @@ void __flush_invalidate_region(void *start, int size) /* * Write back the range of D-cache, and purge the I-cache. * - * Called from kernel/module.c:sys_init_module and routine for a.out format. + * Called from kernel/module.c:sys_init_module and routine for a.out format, + * signal handler code and kprobes code */ void flush_icache_range(unsigned long start, unsigned long end) { - flush_cache_all(); -} - -/* - * Write back the D-cache and purge the I-cache for signal trampoline. - * .. which happens to be the same behavior as flush_icache_range(). - * So, we simply flush out a line. - */ -void __uses_jump_to_uncached flush_cache_sigtramp(unsigned long addr) -{ - unsigned long v, index; - unsigned long flags; + int icacheaddr; + unsigned long flags, v; int i; - v = addr & ~(L1_CACHE_BYTES-1); - asm volatile("ocbwb %0" - : /* no output */ - : "m" (__m(v))); - - index = CACHE_IC_ADDRESS_ARRAY | - (v & boot_cpu_data.icache.entry_mask); - - local_irq_save(flags); - jump_to_uncached(); - - for (i = 0; i < boot_cpu_data.icache.ways; - i++, index += boot_cpu_data.icache.way_incr) - ctrl_outl(0, index); /* Clear out Valid-bit */ - - back_to_cached(); - wmb(); - local_irq_restore(flags); + /* If there are too many pages then just blow the caches */ + if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) { + flush_cache_all(); + } else { + /* selectively flush d-cache then invalidate the i-cache */ + /* this is inefficient, so only use for small ranges */ + start &= ~(L1_CACHE_BYTES-1); + end += L1_CACHE_BYTES-1; + end &= ~(L1_CACHE_BYTES-1); + + local_irq_save(flags); + jump_to_uncached(); + + for (v = start; v < end; v+=L1_CACHE_BYTES) { + asm volatile("ocbwb %0" + : /* no output */ + : "m" (__m(v))); + + icacheaddr = CACHE_IC_ADDRESS_ARRAY | ( + v & cpu_data->icache.entry_mask); + + for (i = 0; i < cpu_data->icache.ways; + i++, icacheaddr += cpu_data->icache.way_incr) + /* Clear i-cache line valid-bit */ + ctrl_outl(0, icacheaddr); + } + + back_to_cached(); + local_irq_restore(flags); + } } static inline void flush_cache_4096(unsigned long start, diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index d3c33fc5b1c..8277982d093 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -10,6 +10,7 @@ * for more details. */ #include <linux/mm.h> +#include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <asm/cacheflush.h> #include <asm/addrspace.h> @@ -185,3 +186,32 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size, } } EXPORT_SYMBOL(dma_cache_sync); + +int platform_resource_setup_memory(struct platform_device *pdev, + char *name, unsigned long memsize) +{ + struct resource *r; + dma_addr_t dma_handle; + void *buf; + + r = pdev->resource + pdev->num_resources - 1; + if (r->flags) { + pr_warning("%s: unable to find empty space for resource\n", + name); + return -EINVAL; + } + + buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL); + if (!buf) { + pr_warning("%s: unable to allocate memory\n", name); + return -ENOMEM; + } + + memset(buf, 0, memsize); + + r->flags = IORESOURCE_MEM; + r->start = dma_handle; + r->end = r->start + memsize - 1; + r->name = name; + return 0; +} diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c index d1fa27594c6..0c776fdfbdd 100644 --- a/arch/sh/mm/fault_32.c +++ b/arch/sh/mm/fault_32.c @@ -37,16 +37,12 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, int fault; siginfo_t info; - trace_hardirqs_on(); - local_irq_enable(); - #ifdef CONFIG_SH_KGDB if (kgdb_nofault && kgdb_bus_err_hook) kgdb_bus_err_hook(); #endif tsk = current; - mm = tsk->mm; si_code = SEGV_MAPERR; if (unlikely(address >= TASK_SIZE)) { @@ -88,6 +84,14 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, return; } + /* Only enable interrupts if they were on before the fault */ + if ((regs->sr & SR_IMASK) != SR_IMASK) { + trace_hardirqs_on(); + local_irq_enable(); + } + + mm = tsk->mm; + /* * If we're in an interrupt or have no user * context, we must not take the fault.. diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index d652d375eb1..b75a7acd62f 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -25,47 +25,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); pgd_t swapper_pg_dir[PTRS_PER_PGD]; unsigned long cached_to_uncached = 0; -void show_mem(void) -{ - int total = 0, reserved = 0, free = 0; - int shared = 0, cached = 0, slab = 0; - pg_data_t *pgdat; - - printk("Mem-info:\n"); - show_free_areas(); - - for_each_online_pgdat(pgdat) { - unsigned long flags, i; - - pgdat_resize_lock(pgdat, &flags); - for (i = 0; i < pgdat->node_spanned_pages; i++) { - struct page *page = pgdat_page_nr(pgdat, i); - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (PageSlab(page)) - slab++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - } - pgdat_resize_unlock(pgdat, &flags); - } - - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - printk("%d pages of RAM\n", total); - printk("%d free pages\n", free); - printk("%d reserved pages\n", reserved); - printk("%d slab pages\n", slab); - printk("%d pages shared\n", shared); - printk("%d pages swap cached\n", cached); - printk(KERN_INFO "Total of %ld pages in page table cache\n", - quicklist_total_size()); -} - #ifdef CONFIG_MMU static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) { diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index 8c7a9ca7987..38870e0fc18 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -111,7 +111,7 @@ EXPORT_SYMBOL(copy_user_highpage); /* * For SH-4, we have our own implementation for ptep_get_and_clear */ -inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { pte_t pte = *ptep; diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c index 7f885b7f8af..eaf25147194 100644 --- a/arch/sh/mm/pg-sh7705.c +++ b/arch/sh/mm/pg-sh7705.c @@ -118,7 +118,7 @@ void copy_user_page(void *to, void *from, unsigned long address, struct page *pg * For SH7705, we have our own implementation for ptep_get_and_clear * Copied from pg-sh4.c */ -inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { pte_t pte = *ptep; diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index 0b0ec6e0475..cef727669c8 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -293,7 +293,7 @@ void pmb_unmap(unsigned long addr) } while (pmbe); } -static void pmb_cache_ctor(struct kmem_cache *cachep, void *pmb) +static void pmb_cache_ctor(void *pmb) { struct pmb_entry *pmbe = pmb; @@ -385,7 +385,7 @@ static const struct file_operations pmb_debugfs_fops = { .open = pmb_debugfs_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = single_release, }; static int __init pmb_debugfs_init(void) diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 1bba7d36be9..0a11cc08f0a 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -46,3 +46,7 @@ R2D_1 RTS7751R2D_1 CAYMAN SH_CAYMAN SDK7780 SH_SDK7780 MIGOR SH_MIGOR +RSK7203 SH_RSK7203 +AP325RXA SH_AP325RXA +SH7763RDP SH_SH7763RDP +SH7785LCR SH_SH7785LCR diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 375de7c6d08..a214002114e 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -68,6 +68,7 @@ config SPARC select HAVE_IDE select HAVE_OPROFILE select HAVE_ARCH_KGDB if !SMP + select HAVE_ARCH_TRACEHOOK # Identify this as a Sparc32 build config SPARC32 diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild new file mode 100644 index 00000000000..a5f0ce734ff --- /dev/null +++ b/arch/sparc/include/asm/Kbuild @@ -0,0 +1,45 @@ +# User exported sparc header files +include include/asm-generic/Kbuild.asm + +header-y += ipcbuf_32.h +header-y += ipcbuf_64.h +header-y += posix_types_32.h +header-y += posix_types_64.h +header-y += ptrace_32.h +header-y += ptrace_64.h +header-y += sigcontext_32.h +header-y += sigcontext_64.h +header-y += siginfo_32.h +header-y += siginfo_64.h +header-y += signal_32.h +header-y += signal_64.h +header-y += stat_32.h +header-y += stat_64.h +header-y += statfs_32.h +header-y += statfs_64.h +header-y += unistd_32.h +header-y += unistd_64.h + +header-y += apc.h +header-y += asi.h +header-y += bpp.h +header-y += display7seg.h +header-y += envctrl.h +header-y += fbio.h +header-y += jsflash.h +header-y += openprom.h +header-y += openprom_32.h +header-y += openprom_64.h +header-y += openpromio.h +header-y += perfctr.h +header-y += psrcompat.h +header-y += psr.h +header-y += pstate.h +header-y += reg.h +header-y += reg_32.h +header-y += reg_64.h +header-y += traps.h +header-y += uctx.h +header-y += utrap.h +header-y += vfc_ioctls.h +header-y += watchdog.h diff --git a/arch/sparc/include/asm/agp.h b/arch/sparc/include/asm/agp.h new file mode 100644 index 00000000000..c2456870b05 --- /dev/null +++ b/arch/sparc/include/asm/agp.h @@ -0,0 +1,20 @@ +#ifndef AGP_H +#define AGP_H 1 + +/* dummy for now */ + +#define map_page_into_agp(page) +#define unmap_page_from_agp(page) +#define flush_agp_cache() mb() + +/* Convert a physical address to an address suitable for the GART. */ +#define phys_to_gart(x) (x) +#define gart_to_phys(x) (x) + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + +#endif diff --git a/arch/sparc/include/asm/apb.h b/arch/sparc/include/asm/apb.h new file mode 100644 index 00000000000..8f3b57db810 --- /dev/null +++ b/arch/sparc/include/asm/apb.h @@ -0,0 +1,36 @@ +/* + * apb.h: Advanced PCI Bridge Configuration Registers and Bits + * + * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) + */ + +#ifndef _SPARC64_APB_H +#define _SPARC64_APB_H + +#define APB_TICK_REGISTER 0xb0 +#define APB_INT_ACK 0xb8 +#define APB_PRIMARY_MASTER_RETRY_LIMIT 0xc0 +#define APB_DMA_ASFR 0xc8 +#define APB_DMA_AFAR 0xd0 +#define APB_PIO_TARGET_RETRY_LIMIT 0xd8 +#define APB_PIO_TARGET_LATENCY_TIMER 0xd9 +#define APB_DMA_TARGET_RETRY_LIMIT 0xda +#define APB_DMA_TARGET_LATENCY_TIMER 0xdb +#define APB_SECONDARY_MASTER_RETRY_LIMIT 0xdc +#define APB_SECONDARY_CONTROL 0xdd +#define APB_IO_ADDRESS_MAP 0xde +#define APB_MEM_ADDRESS_MAP 0xdf + +#define APB_PCI_CONTROL_LOW 0xe0 +# define APB_PCI_CTL_LOW_ARB_PARK (1 << 21) +# define APB_PCI_CTL_LOW_ERRINT_EN (1 << 8) + +#define APB_PCI_CONTROL_HIGH 0xe4 +# define APB_PCI_CTL_HIGH_SERR (1 << 2) +# define APB_PCI_CTL_HIGH_ARBITER_EN (1 << 0) + +#define APB_PIO_ASFR 0xe8 +#define APB_PIO_AFAR 0xf0 +#define APB_DIAG_REGISTER 0xf8 + +#endif /* !(_SPARC64_APB_H) */ diff --git a/arch/sparc/include/asm/apc.h b/arch/sparc/include/asm/apc.h new file mode 100644 index 00000000000..24e9a7d4d97 --- /dev/null +++ b/arch/sparc/include/asm/apc.h @@ -0,0 +1,64 @@ +/* apc - Driver definitions for power management functions + * of Aurora Personality Chip (APC) on SPARCstation-4/5 and + * derivatives + * + * Copyright (c) 2001 Eric Brower (ebrower@usa.net) + * + */ + +#ifndef _SPARC_APC_H +#define _SPARC_APC_H + +#include <linux/ioctl.h> + +#define APC_IOC 'A' + +#define APCIOCGFANCTL _IOR(APC_IOC, 0x00, int) /* Get fan speed */ +#define APCIOCSFANCTL _IOW(APC_IOC, 0x01, int) /* Set fan speed */ + +#define APCIOCGCPWR _IOR(APC_IOC, 0x02, int) /* Get CPOWER state */ +#define APCIOCSCPWR _IOW(APC_IOC, 0x03, int) /* Set CPOWER state */ + +#define APCIOCGBPORT _IOR(APC_IOC, 0x04, int) /* Get BPORT state */ +#define APCIOCSBPORT _IOW(APC_IOC, 0x05, int) /* Set BPORT state */ + +/* + * Register offsets + */ +#define APC_IDLE_REG 0x00 +#define APC_FANCTL_REG 0x20 +#define APC_CPOWER_REG 0x24 +#define APC_BPORT_REG 0x30 + +#define APC_REGMASK 0x01 +#define APC_BPMASK 0x03 + +/* + * IDLE - CPU standby values (set to initiate standby) + */ +#define APC_IDLE_ON 0x01 + +/* + * FANCTL - Fan speed control state values + */ +#define APC_FANCTL_HI 0x00 /* Fan speed high */ +#define APC_FANCTL_LO 0x01 /* Fan speed low */ + +/* + * CPWR - Convenience power outlet state values + */ +#define APC_CPOWER_ON 0x00 /* Conv power on */ +#define APC_CPOWER_OFF 0x01 /* Conv power off */ + +/* + * BPA/BPB - Read-Write "Bit Ports" state values (reset to 0 at power-on) + * + * WARNING: Internal usage of bit ports is platform dependent-- + * don't modify BPORT settings unless you know what you are doing. + * + * On SS5 BPA seems to toggle onboard ethernet loopback... -E + */ +#define APC_BPORT_A 0x01 /* Bit Port A */ +#define APC_BPORT_B 0x02 /* Bit Port B */ + +#endif /* !(_SPARC_APC_H) */ diff --git a/arch/sparc/include/asm/asi.h b/arch/sparc/include/asm/asi.h new file mode 100644 index 00000000000..74703c5ef98 --- /dev/null +++ b/arch/sparc/include/asm/asi.h @@ -0,0 +1,262 @@ +#ifndef _SPARC_ASI_H +#define _SPARC_ASI_H + +/* asi.h: Address Space Identifier values for the sparc. + * + * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu) + * + * Pioneer work for sun4m: Paul Hatchman (paul@sfe.com.au) + * Joint edition for sun4c+sun4m: Pete A. Zaitcev <zaitcev@ipmce.su> + */ + +/* The first batch are for the sun4c. */ + +#define ASI_NULL1 0x00 +#define ASI_NULL2 0x01 + +/* sun4c and sun4 control registers and mmu/vac ops */ +#define ASI_CONTROL 0x02 +#define ASI_SEGMAP 0x03 +#define ASI_PTE 0x04 +#define ASI_HWFLUSHSEG 0x05 +#define ASI_HWFLUSHPAGE 0x06 +#define ASI_REGMAP 0x06 +#define ASI_HWFLUSHCONTEXT 0x07 + +#define ASI_USERTXT 0x08 +#define ASI_KERNELTXT 0x09 +#define ASI_USERDATA 0x0a +#define ASI_KERNELDATA 0x0b + +/* VAC Cache flushing on sun4c and sun4 */ +#define ASI_FLUSHSEG 0x0c +#define ASI_FLUSHPG 0x0d +#define ASI_FLUSHCTX 0x0e + +/* SPARCstation-5: only 6 bits are decoded. */ +/* wo = Write Only, rw = Read Write; */ +/* ss = Single Size, as = All Sizes; */ +#define ASI_M_RES00 0x00 /* Don't touch... */ +#define ASI_M_UNA01 0x01 /* Same here... */ +#define ASI_M_MXCC 0x02 /* Access to TI VIKING MXCC registers */ +#define ASI_M_FLUSH_PROBE 0x03 /* Reference MMU Flush/Probe; rw, ss */ +#define ASI_M_MMUREGS 0x04 /* MMU Registers; rw, ss */ +#define ASI_M_TLBDIAG 0x05 /* MMU TLB only Diagnostics */ +#define ASI_M_DIAGS 0x06 /* Reference MMU Diagnostics */ +#define ASI_M_IODIAG 0x07 /* MMU I/O TLB only Diagnostics */ +#define ASI_M_USERTXT 0x08 /* Same as ASI_USERTXT; rw, as */ +#define ASI_M_KERNELTXT 0x09 /* Same as ASI_KERNELTXT; rw, as */ +#define ASI_M_USERDATA 0x0A /* Same as ASI_USERDATA; rw, as */ +#define ASI_M_KERNELDATA 0x0B /* Same as ASI_KERNELDATA; rw, as */ +#define ASI_M_TXTC_TAG 0x0C /* Instruction Cache Tag; rw, ss */ +#define ASI_M_TXTC_DATA 0x0D /* Instruction Cache Data; rw, ss */ +#define ASI_M_DATAC_TAG 0x0E /* Data Cache Tag; rw, ss */ +#define ASI_M_DATAC_DATA 0x0F /* Data Cache Data; rw, ss */ + +/* The following cache flushing ASIs work only with the 'sta' + * instruction. Results are unpredictable for 'swap' and 'ldstuba', + * so don't do it. + */ + +/* These ASI flushes affect external caches too. */ +#define ASI_M_FLUSH_PAGE 0x10 /* Flush I&D Cache Line (page); wo, ss */ +#define ASI_M_FLUSH_SEG 0x11 /* Flush I&D Cache Line (seg); wo, ss */ +#define ASI_M_FLUSH_REGION 0x12 /* Flush I&D Cache Line (region); wo, ss */ +#define ASI_M_FLUSH_CTX 0x13 /* Flush I&D Cache Line (context); wo, ss */ +#define ASI_M_FLUSH_USER 0x14 /* Flush I&D Cache Line (user); wo, ss */ + +/* Block-copy operations are available only on certain V8 cpus. */ +#define ASI_M_BCOPY 0x17 /* Block copy */ + +/* These affect only the ICACHE and are Ross HyperSparc and TurboSparc specific. */ +#define ASI_M_IFLUSH_PAGE 0x18 /* Flush I Cache Line (page); wo, ss */ +#define ASI_M_IFLUSH_SEG 0x19 /* Flush I Cache Line (seg); wo, ss */ +#define ASI_M_IFLUSH_REGION 0x1A /* Flush I Cache Line (region); wo, ss */ +#define ASI_M_IFLUSH_CTX 0x1B /* Flush I Cache Line (context); wo, ss */ +#define ASI_M_IFLUSH_USER 0x1C /* Flush I Cache Line (user); wo, ss */ + +/* Block-fill operations are available on certain V8 cpus */ +#define ASI_M_BFILL 0x1F + +/* This allows direct access to main memory, actually 0x20 to 0x2f are + * the available ASI's for physical ram pass-through, but I don't have + * any idea what the other ones do.... + */ + +#define ASI_M_BYPASS 0x20 /* Reference MMU bypass; rw, as */ +#define ASI_M_FBMEM 0x29 /* Graphics card frame buffer access */ +#define ASI_M_VMEUS 0x2A /* VME user 16-bit access */ +#define ASI_M_VMEPS 0x2B /* VME priv 16-bit access */ +#define ASI_M_VMEUT 0x2C /* VME user 32-bit access */ +#define ASI_M_VMEPT 0x2D /* VME priv 32-bit access */ +#define ASI_M_SBUS 0x2E /* Direct SBus access */ +#define ASI_M_CTL 0x2F /* Control Space (ECC and MXCC are here) */ + + +/* This is ROSS HyperSparc only. */ +#define ASI_M_FLUSH_IWHOLE 0x31 /* Flush entire ICACHE; wo, ss */ + +/* Tsunami/Viking/TurboSparc i/d cache flash clear. */ +#define ASI_M_IC_FLCLEAR 0x36 +#define ASI_M_DC_FLCLEAR 0x37 + +#define ASI_M_DCDR 0x39 /* Data Cache Diagnostics Register rw, ss */ + +#define ASI_M_VIKING_TMP1 0x40 /* Emulation temporary 1 on Viking */ +/* only available on SuperSparc I */ +/* #define ASI_M_VIKING_TMP2 0x41 */ /* Emulation temporary 2 on Viking */ + +#define ASI_M_ACTION 0x4c /* Breakpoint Action Register (GNU/Viking) */ + +/* V9 Architecture mandary ASIs. */ +#define ASI_N 0x04 /* Nucleus */ +#define ASI_NL 0x0c /* Nucleus, little endian */ +#define ASI_AIUP 0x10 /* Primary, user */ +#define ASI_AIUS 0x11 /* Secondary, user */ +#define ASI_AIUPL 0x18 /* Primary, user, little endian */ +#define ASI_AIUSL 0x19 /* Secondary, user, little endian */ +#define ASI_P 0x80 /* Primary, implicit */ +#define ASI_S 0x81 /* Secondary, implicit */ +#define ASI_PNF 0x82 /* Primary, no fault */ +#define ASI_SNF 0x83 /* Secondary, no fault */ +#define ASI_PL 0x88 /* Primary, implicit, l-endian */ +#define ASI_SL 0x89 /* Secondary, implicit, l-endian */ +#define ASI_PNFL 0x8a /* Primary, no fault, l-endian */ +#define ASI_SNFL 0x8b /* Secondary, no fault, l-endian */ + +/* SpitFire and later extended ASIs. The "(III)" marker designates + * UltraSparc-III and later specific ASIs. The "(CMT)" marker designates + * Chip Multi Threading specific ASIs. "(NG)" designates Niagara specific + * ASIs, "(4V)" designates SUN4V specific ASIs. + */ +#define ASI_PHYS_USE_EC 0x14 /* PADDR, E-cachable */ +#define ASI_PHYS_BYPASS_EC_E 0x15 /* PADDR, E-bit */ +#define ASI_BLK_AIUP_4V 0x16 /* (4V) Prim, user, block ld/st */ +#define ASI_BLK_AIUS_4V 0x17 /* (4V) Sec, user, block ld/st */ +#define ASI_PHYS_USE_EC_L 0x1c /* PADDR, E-cachable, little endian*/ +#define ASI_PHYS_BYPASS_EC_E_L 0x1d /* PADDR, E-bit, little endian */ +#define ASI_BLK_AIUP_L_4V 0x1e /* (4V) Prim, user, block, l-endian*/ +#define ASI_BLK_AIUS_L_4V 0x1f /* (4V) Sec, user, block, l-endian */ +#define ASI_SCRATCHPAD 0x20 /* (4V) Scratch Pad Registers */ +#define ASI_MMU 0x21 /* (4V) MMU Context Registers */ +#define ASI_BLK_INIT_QUAD_LDD_AIUS 0x23 /* (NG) init-store, twin load, + * secondary, user + */ +#define ASI_NUCLEUS_QUAD_LDD 0x24 /* Cachable, qword load */ +#define ASI_QUEUE 0x25 /* (4V) Interrupt Queue Registers */ +#define ASI_QUAD_LDD_PHYS_4V 0x26 /* (4V) Physical, qword load */ +#define ASI_NUCLEUS_QUAD_LDD_L 0x2c /* Cachable, qword load, l-endian */ +#define ASI_QUAD_LDD_PHYS_L_4V 0x2e /* (4V) Phys, qword load, l-endian */ +#define ASI_PCACHE_DATA_STATUS 0x30 /* (III) PCache data stat RAM diag */ +#define ASI_PCACHE_DATA 0x31 /* (III) PCache data RAM diag */ +#define ASI_PCACHE_TAG 0x32 /* (III) PCache tag RAM diag */ +#define ASI_PCACHE_SNOOP_TAG 0x33 /* (III) PCache snoop tag RAM diag */ +#define ASI_QUAD_LDD_PHYS 0x34 /* (III+) PADDR, qword load */ +#define ASI_WCACHE_VALID_BITS 0x38 /* (III) WCache Valid Bits diag */ +#define ASI_WCACHE_DATA 0x39 /* (III) WCache data RAM diag */ +#define ASI_WCACHE_TAG 0x3a /* (III) WCache tag RAM diag */ +#define ASI_WCACHE_SNOOP_TAG 0x3b /* (III) WCache snoop tag RAM diag */ +#define ASI_QUAD_LDD_PHYS_L 0x3c /* (III+) PADDR, qw-load, l-endian */ +#define ASI_SRAM_FAST_INIT 0x40 /* (III+) Fast SRAM init */ +#define ASI_CORE_AVAILABLE 0x41 /* (CMT) LP Available */ +#define ASI_CORE_ENABLE_STAT 0x41 /* (CMT) LP Enable Status */ +#define ASI_CORE_ENABLE 0x41 /* (CMT) LP Enable RW */ +#define ASI_XIR_STEERING 0x41 /* (CMT) XIR Steering RW */ +#define ASI_CORE_RUNNING_RW 0x41 /* (CMT) LP Running RW */ +#define ASI_CORE_RUNNING_W1S 0x41 /* (CMT) LP Running Write-One Set */ +#define ASI_CORE_RUNNING_W1C 0x41 /* (CMT) LP Running Write-One Clr */ +#define ASI_CORE_RUNNING_STAT 0x41 /* (CMT) LP Running Status */ +#define ASI_CMT_ERROR_STEERING 0x41 /* (CMT) Error Steering RW */ +#define ASI_DCACHE_INVALIDATE 0x42 /* (III) DCache Invalidate diag */ +#define ASI_DCACHE_UTAG 0x43 /* (III) DCache uTag diag */ +#define ASI_DCACHE_SNOOP_TAG 0x44 /* (III) DCache snoop tag RAM diag */ +#define ASI_LSU_CONTROL 0x45 /* Load-store control unit */ +#define ASI_DCU_CONTROL_REG 0x45 /* (III) DCache Unit Control reg */ +#define ASI_DCACHE_DATA 0x46 /* DCache data-ram diag access */ +#define ASI_DCACHE_TAG 0x47 /* Dcache tag/valid ram diag access*/ +#define ASI_INTR_DISPATCH_STAT 0x48 /* IRQ vector dispatch status */ +#define ASI_INTR_RECEIVE 0x49 /* IRQ vector receive status */ +#define ASI_UPA_CONFIG 0x4a /* UPA config space */ +#define ASI_JBUS_CONFIG 0x4a /* (IIIi) JBUS Config Register */ +#define ASI_SAFARI_CONFIG 0x4a /* (III) Safari Config Register */ +#define ASI_SAFARI_ADDRESS 0x4a /* (III) Safari Address Register */ +#define ASI_ESTATE_ERROR_EN 0x4b /* E-cache error enable space */ +#define ASI_AFSR 0x4c /* Async fault status register */ +#define ASI_AFAR 0x4d /* Async fault address register */ +#define ASI_EC_TAG_DATA 0x4e /* E-cache tag/valid ram diag acc */ +#define ASI_IMMU 0x50 /* Insn-MMU main register space */ +#define ASI_IMMU_TSB_8KB_PTR 0x51 /* Insn-MMU 8KB TSB pointer reg */ +#define ASI_IMMU_TSB_64KB_PTR 0x52 /* Insn-MMU 64KB TSB pointer reg */ +#define ASI_ITLB_DATA_IN 0x54 /* Insn-MMU TLB data in reg */ +#define ASI_ITLB_DATA_ACCESS 0x55 /* Insn-MMU TLB data access reg */ +#define ASI_ITLB_TAG_READ 0x56 /* Insn-MMU TLB tag read reg */ +#define ASI_IMMU_DEMAP 0x57 /* Insn-MMU TLB demap */ +#define ASI_DMMU 0x58 /* Data-MMU main register space */ +#define ASI_DMMU_TSB_8KB_PTR 0x59 /* Data-MMU 8KB TSB pointer reg */ +#define ASI_DMMU_TSB_64KB_PTR 0x5a /* Data-MMU 16KB TSB pointer reg */ +#define ASI_DMMU_TSB_DIRECT_PTR 0x5b /* Data-MMU TSB direct pointer reg */ +#define ASI_DTLB_DATA_IN 0x5c /* Data-MMU TLB data in reg */ +#define ASI_DTLB_DATA_ACCESS 0x5d /* Data-MMU TLB data access reg */ +#define ASI_DTLB_TAG_READ 0x5e /* Data-MMU TLB tag read reg */ +#define ASI_DMMU_DEMAP 0x5f /* Data-MMU TLB demap */ +#define ASI_IIU_INST_TRAP 0x60 /* (III) Instruction Breakpoint */ +#define ASI_INTR_ID 0x63 /* (CMT) Interrupt ID register */ +#define ASI_CORE_ID 0x63 /* (CMT) LP ID register */ +#define ASI_CESR_ID 0x63 /* (CMT) CESR ID register */ +#define ASI_IC_INSTR 0x66 /* Insn cache instrucion ram diag */ +#define ASI_IC_TAG 0x67 /* Insn cache tag/valid ram diag */ +#define ASI_IC_STAG 0x68 /* (III) Insn cache snoop tag ram */ +#define ASI_IC_PRE_DECODE 0x6e /* Insn cache pre-decode ram diag */ +#define ASI_IC_NEXT_FIELD 0x6f /* Insn cache next-field ram diag */ +#define ASI_BRPRED_ARRAY 0x6f /* (III) Branch Prediction RAM diag*/ +#define ASI_BLK_AIUP 0x70 /* Primary, user, block load/store */ +#define ASI_BLK_AIUS 0x71 /* Secondary, user, block ld/st */ +#define ASI_MCU_CTRL_REG 0x72 /* (III) Memory controller regs */ +#define ASI_EC_DATA 0x74 /* (III) E-cache data staging reg */ +#define ASI_EC_CTRL 0x75 /* (III) E-cache control reg */ +#define ASI_EC_W 0x76 /* E-cache diag write access */ +#define ASI_UDB_ERROR_W 0x77 /* External UDB error regs W */ +#define ASI_UDB_CONTROL_W 0x77 /* External UDB control regs W */ +#define ASI_INTR_W 0x77 /* IRQ vector dispatch write */ +#define ASI_INTR_DATAN_W 0x77 /* (III) Out irq vector data reg N */ +#define ASI_INTR_DISPATCH_W 0x77 /* (III) Interrupt vector dispatch */ +#define ASI_BLK_AIUPL 0x78 /* Primary, user, little, blk ld/st*/ +#define ASI_BLK_AIUSL 0x79 /* Secondary, user, little, blk ld/st*/ +#define ASI_EC_R 0x7e /* E-cache diag read access */ +#define ASI_UDBH_ERROR_R 0x7f /* External UDB error regs rd hi */ +#define ASI_UDBL_ERROR_R 0x7f /* External UDB error regs rd low */ +#define ASI_UDBH_CONTROL_R 0x7f /* External UDB control regs rd hi */ +#define ASI_UDBL_CONTROL_R 0x7f /* External UDB control regs rd low*/ +#define ASI_INTR_R 0x7f /* IRQ vector dispatch read */ +#define ASI_INTR_DATAN_R 0x7f /* (III) In irq vector data reg N */ +#define ASI_PST8_P 0xc0 /* Primary, 8 8-bit, partial */ +#define ASI_PST8_S 0xc1 /* Secondary, 8 8-bit, partial */ +#define ASI_PST16_P 0xc2 /* Primary, 4 16-bit, partial */ +#define ASI_PST16_S 0xc3 /* Secondary, 4 16-bit, partial */ +#define ASI_PST32_P 0xc4 /* Primary, 2 32-bit, partial */ +#define ASI_PST32_S 0xc5 /* Secondary, 2 32-bit, partial */ +#define ASI_PST8_PL 0xc8 /* Primary, 8 8-bit, partial, L */ +#define ASI_PST8_SL 0xc9 /* Secondary, 8 8-bit, partial, L */ +#define ASI_PST16_PL 0xca /* Primary, 4 16-bit, partial, L */ +#define ASI_PST16_SL 0xcb /* Secondary, 4 16-bit, partial, L */ +#define ASI_PST32_PL 0xcc /* Primary, 2 32-bit, partial, L */ +#define ASI_PST32_SL 0xcd /* Secondary, 2 32-bit, partial, L */ +#define ASI_FL8_P 0xd0 /* Primary, 1 8-bit, fpu ld/st */ +#define ASI_FL8_S 0xd1 /* Secondary, 1 8-bit, fpu ld/st */ +#define ASI_FL16_P 0xd2 /* Primary, 1 16-bit, fpu ld/st */ +#define ASI_FL16_S 0xd3 /* Secondary, 1 16-bit, fpu ld/st */ +#define ASI_FL8_PL 0xd8 /* Primary, 1 8-bit, fpu ld/st, L */ +#define ASI_FL8_SL 0xd9 /* Secondary, 1 8-bit, fpu ld/st, L*/ +#define ASI_FL16_PL 0xda /* Primary, 1 16-bit, fpu ld/st, L */ +#define ASI_FL16_SL 0xdb /* Secondary, 1 16-bit, fpu ld/st,L*/ +#define ASI_BLK_COMMIT_P 0xe0 /* Primary, blk store commit */ +#define ASI_BLK_COMMIT_S 0xe1 /* Secondary, blk store commit */ +#define ASI_BLK_INIT_QUAD_LDD_P 0xe2 /* (NG) init-store, twin load, + * primary, implicit + */ +#define ASI_BLK_P 0xf0 /* Primary, blk ld/st */ +#define ASI_BLK_S 0xf1 /* Secondary, blk ld/st */ +#define ASI_BLK_PL 0xf8 /* Primary, blk ld/st, little */ +#define ASI_BLK_SL 0xf9 /* Secondary, blk ld/st, little */ + +#endif /* _SPARC_ASI_H */ diff --git a/arch/sparc/include/asm/asmmacro.h b/arch/sparc/include/asm/asmmacro.h new file mode 100644 index 00000000000..a619a4d97aa --- /dev/null +++ b/arch/sparc/include/asm/asmmacro.h @@ -0,0 +1,45 @@ +/* asmmacro.h: Assembler macros. + * + * Copyright (C) 1996 David S. Miller (davem@caipfs.rutgers.edu) + */ + +#ifndef _SPARC_ASMMACRO_H +#define _SPARC_ASMMACRO_H + +#include <asm/btfixup.h> +#include <asm/asi.h> + +#define GET_PROCESSOR4M_ID(reg) \ + rd %tbr, %reg; \ + srl %reg, 12, %reg; \ + and %reg, 3, %reg; + +#define GET_PROCESSOR4D_ID(reg) \ + lda [%g0] ASI_M_VIKING_TMP1, %reg; + +/* All trap entry points _must_ begin with this macro or else you + * lose. It makes sure the kernel has a proper window so that + * c-code can be called. + */ +#define SAVE_ALL_HEAD \ + sethi %hi(trap_setup), %l4; \ + jmpl %l4 + %lo(trap_setup), %l6; +#define SAVE_ALL \ + SAVE_ALL_HEAD \ + nop; + +/* All traps low-level code here must end with this macro. */ +#define RESTORE_ALL b ret_trap_entry; clr %l6; + +/* sun4 probably wants half word accesses to ASI_SEGMAP, while sun4c+ + likes byte accesses. These are to avoid ifdef mania. */ + +#ifdef CONFIG_SUN4 +#define lduXa lduha +#define stXa stha +#else +#define lduXa lduba +#define stXa stba +#endif + +#endif /* !(_SPARC_ASMMACRO_H) */ diff --git a/arch/sparc/include/asm/atomic.h b/arch/sparc/include/asm/atomic.h new file mode 100644 index 00000000000..8ff83d8cc33 --- /dev/null +++ b/arch/sparc/include/asm/atomic.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_ATOMIC_H +#define ___ASM_SPARC_ATOMIC_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/atomic_64.h> +#else +#include <asm/atomic_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h new file mode 100644 index 00000000000..5c944b5a804 --- /dev/null +++ b/arch/sparc/include/asm/atomic_32.h @@ -0,0 +1,165 @@ +/* atomic.h: These still suck, but the I-cache hit rate is higher. + * + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) + * Copyright (C) 2000 Anton Blanchard (anton@linuxcare.com.au) + * Copyright (C) 2007 Kyle McMartin (kyle@parisc-linux.org) + * + * Additions by Keith M Wesolowski (wesolows@foobazco.org) based + * on asm-parisc/atomic.h Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>. + */ + +#ifndef __ARCH_SPARC_ATOMIC__ +#define __ARCH_SPARC_ATOMIC__ + +#include <linux/types.h> + +typedef struct { volatile int counter; } atomic_t; + +#ifdef __KERNEL__ + +#define ATOMIC_INIT(i) { (i) } + +extern int __atomic_add_return(int, atomic_t *); +extern int atomic_cmpxchg(atomic_t *, int, int); +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) +extern int atomic_add_unless(atomic_t *, int, int); +extern void atomic_set(atomic_t *, int); + +#define atomic_read(v) ((v)->counter) + +#define atomic_add(i, v) ((void)__atomic_add_return( (int)(i), (v))) +#define atomic_sub(i, v) ((void)__atomic_add_return(-(int)(i), (v))) +#define atomic_inc(v) ((void)__atomic_add_return( 1, (v))) +#define atomic_dec(v) ((void)__atomic_add_return( -1, (v))) + +#define atomic_add_return(i, v) (__atomic_add_return( (int)(i), (v))) +#define atomic_sub_return(i, v) (__atomic_add_return(-(int)(i), (v))) +#define atomic_inc_return(v) (__atomic_add_return( 1, (v))) +#define atomic_dec_return(v) (__atomic_add_return( -1, (v))) + +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) + +/* + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) + +#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0) +#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0) + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +/* This is the old 24-bit implementation. It's still used internally + * by some sparc-specific code, notably the semaphore implementation. + */ +typedef struct { volatile int counter; } atomic24_t; + +#ifndef CONFIG_SMP + +#define ATOMIC24_INIT(i) { (i) } +#define atomic24_read(v) ((v)->counter) +#define atomic24_set(v, i) (((v)->counter) = i) + +#else +/* We do the bulk of the actual work out of line in two common + * routines in assembler, see arch/sparc/lib/atomic.S for the + * "fun" details. + * + * For SMP the trick is you embed the spin lock byte within + * the word, use the low byte so signedness is easily retained + * via a quick arithmetic shift. It looks like this: + * + * ---------------------------------------- + * | signed 24-bit counter value | lock | atomic_t + * ---------------------------------------- + * 31 8 7 0 + */ + +#define ATOMIC24_INIT(i) { ((i) << 8) } + +static inline int atomic24_read(const atomic24_t *v) +{ + int ret = v->counter; + + while(ret & 0xff) + ret = v->counter; + + return ret >> 8; +} + +#define atomic24_set(v, i) (((v)->counter) = ((i) << 8)) +#endif + +static inline int __atomic24_add(int i, atomic24_t *v) +{ + register volatile int *ptr asm("g1"); + register int increment asm("g2"); + register int tmp1 asm("g3"); + register int tmp2 asm("g4"); + register int tmp3 asm("g7"); + + ptr = &v->counter; + increment = i; + + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___atomic24_add\n\t" + " add %%o7, 8, %%o7\n" + : "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3) + : "0" (increment), "r" (ptr) + : "memory", "cc"); + + return increment; +} + +static inline int __atomic24_sub(int i, atomic24_t *v) +{ + register volatile int *ptr asm("g1"); + register int increment asm("g2"); + register int tmp1 asm("g3"); + register int tmp2 asm("g4"); + register int tmp3 asm("g7"); + + ptr = &v->counter; + increment = i; + + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___atomic24_sub\n\t" + " add %%o7, 8, %%o7\n" + : "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3) + : "0" (increment), "r" (ptr) + : "memory", "cc"); + + return increment; +} + +#define atomic24_add(i, v) ((void)__atomic24_add((i), (v))) +#define atomic24_sub(i, v) ((void)__atomic24_sub((i), (v))) + +#define atomic24_dec_return(v) __atomic24_sub(1, (v)) +#define atomic24_inc_return(v) __atomic24_add(1, (v)) + +#define atomic24_sub_and_test(i, v) (__atomic24_sub((i), (v)) == 0) +#define atomic24_dec_and_test(v) (__atomic24_sub(1, (v)) == 0) + +#define atomic24_inc(v) ((void)__atomic24_add(1, (v))) +#define atomic24_dec(v) ((void)__atomic24_sub(1, (v))) + +#define atomic24_add_negative(i, v) (__atomic24_add((i), (v)) < 0) + +/* Atomic operations are already serializing */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#endif /* !(__KERNEL__) */ + +#include <asm-generic/atomic.h> +#endif /* !(__ARCH_SPARC_ATOMIC__) */ diff --git a/arch/sparc/include/asm/atomic_64.h b/arch/sparc/include/asm/atomic_64.h new file mode 100644 index 00000000000..2c71ec4a3b1 --- /dev/null +++ b/arch/sparc/include/asm/atomic_64.h @@ -0,0 +1,128 @@ +/* atomic.h: Thankfully the V9 is at least reasonable for this + * stuff. + * + * Copyright (C) 1996, 1997, 2000 David S. Miller (davem@redhat.com) + */ + +#ifndef __ARCH_SPARC64_ATOMIC__ +#define __ARCH_SPARC64_ATOMIC__ + +#include <linux/types.h> +#include <asm/system.h> + +typedef struct { volatile int counter; } atomic_t; +typedef struct { volatile __s64 counter; } atomic64_t; + +#define ATOMIC_INIT(i) { (i) } +#define ATOMIC64_INIT(i) { (i) } + +#define atomic_read(v) ((v)->counter) +#define atomic64_read(v) ((v)->counter) + +#define atomic_set(v, i) (((v)->counter) = i) +#define atomic64_set(v, i) (((v)->counter) = i) + +extern void atomic_add(int, atomic_t *); +extern void atomic64_add(int, atomic64_t *); +extern void atomic_sub(int, atomic_t *); +extern void atomic64_sub(int, atomic64_t *); + +extern int atomic_add_ret(int, atomic_t *); +extern int atomic64_add_ret(int, atomic64_t *); +extern int atomic_sub_ret(int, atomic_t *); +extern int atomic64_sub_ret(int, atomic64_t *); + +#define atomic_dec_return(v) atomic_sub_ret(1, v) +#define atomic64_dec_return(v) atomic64_sub_ret(1, v) + +#define atomic_inc_return(v) atomic_add_ret(1, v) +#define atomic64_inc_return(v) atomic64_add_ret(1, v) + +#define atomic_sub_return(i, v) atomic_sub_ret(i, v) +#define atomic64_sub_return(i, v) atomic64_sub_ret(i, v) + +#define atomic_add_return(i, v) atomic_add_ret(i, v) +#define atomic64_add_return(i, v) atomic64_add_ret(i, v) + +/* + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) +#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0) + +#define atomic_sub_and_test(i, v) (atomic_sub_ret(i, v) == 0) +#define atomic64_sub_and_test(i, v) (atomic64_sub_ret(i, v) == 0) + +#define atomic_dec_and_test(v) (atomic_sub_ret(1, v) == 0) +#define atomic64_dec_and_test(v) (atomic64_sub_ret(1, v) == 0) + +#define atomic_inc(v) atomic_add(1, v) +#define atomic64_inc(v) atomic64_add(1, v) + +#define atomic_dec(v) atomic_sub(1, v) +#define atomic64_dec(v) atomic64_sub(1, v) + +#define atomic_add_negative(i, v) (atomic_add_ret(i, v) < 0) +#define atomic64_add_negative(i, v) (atomic64_add_ret(i, v) < 0) + +#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int c, old; + c = atomic_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +#define atomic64_cmpxchg(v, o, n) \ + ((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n))) +#define atomic64_xchg(v, new) (xchg(&((v)->counter), new)) + +static inline int atomic64_add_unless(atomic64_t *v, long a, long u) +{ + long c, old; + c = atomic64_read(v); + for (;;) { + if (unlikely(c == (u))) + break; + old = atomic64_cmpxchg((v), c, c + (a)); + if (likely(old == c)) + break; + c = old; + } + return c != (u); +} + +#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) + +/* Atomic operations are already serializing */ +#ifdef CONFIG_SMP +#define smp_mb__before_atomic_dec() membar_storeload_loadload(); +#define smp_mb__after_atomic_dec() membar_storeload_storestore(); +#define smp_mb__before_atomic_inc() membar_storeload_loadload(); +#define smp_mb__after_atomic_inc() membar_storeload_storestore(); +#else +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() +#endif + +#include <asm-generic/atomic.h> +#endif /* !(__ARCH_SPARC64_ATOMIC__) */ diff --git a/arch/sparc/include/asm/auxio.h b/arch/sparc/include/asm/auxio.h new file mode 100644 index 00000000000..13dc67f0301 --- /dev/null +++ b/arch/sparc/include/asm/auxio.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_AUXIO_H +#define ___ASM_SPARC_AUXIO_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/auxio_64.h> +#else +#include <asm/auxio_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/auxio_32.h b/arch/sparc/include/asm/auxio_32.h new file mode 100644 index 00000000000..e03e088be95 --- /dev/null +++ b/arch/sparc/include/asm/auxio_32.h @@ -0,0 +1,89 @@ +/* + * auxio.h: Definitions and code for the Auxiliary I/O register. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ +#ifndef _SPARC_AUXIO_H +#define _SPARC_AUXIO_H + +#include <asm/system.h> +#include <asm/vaddrs.h> + +/* This register is an unsigned char in IO space. It does two things. + * First, it is used to control the front panel LED light on machines + * that have it (good for testing entry points to trap handlers and irq's) + * Secondly, it controls various floppy drive parameters. + */ +#define AUXIO_ORMEIN 0xf0 /* All writes must set these bits. */ +#define AUXIO_ORMEIN4M 0xc0 /* sun4m - All writes must set these bits. */ +#define AUXIO_FLPY_DENS 0x20 /* Floppy density, high if set. Read only. */ +#define AUXIO_FLPY_DCHG 0x10 /* A disk change occurred. Read only. */ +#define AUXIO_EDGE_ON 0x10 /* sun4m - On means Jumper block is in. */ +#define AUXIO_FLPY_DSEL 0x08 /* Drive select/start-motor. Write only. */ +#define AUXIO_LINK_TEST 0x08 /* sun4m - On means TPE Carrier detect. */ + +/* Set the following to one, then zero, after doing a pseudo DMA transfer. */ +#define AUXIO_FLPY_TCNT 0x04 /* Floppy terminal count. Write only. */ + +/* Set the following to zero to eject the floppy. */ +#define AUXIO_FLPY_EJCT 0x02 /* Eject floppy disk. Write only. */ +#define AUXIO_LED 0x01 /* On if set, off if unset. Read/Write */ + +#ifndef __ASSEMBLY__ + +/* + * NOTE: these routines are implementation dependent-- + * understand the hardware you are querying! + */ +extern void set_auxio(unsigned char bits_on, unsigned char bits_off); +extern unsigned char get_auxio(void); /* .../asm/floppy.h */ + +/* + * The following routines are provided for driver-compatibility + * with sparc64 (primarily sunlance.c) + */ + +#define AUXIO_LTE_ON 1 +#define AUXIO_LTE_OFF 0 + +/* auxio_set_lte - Set Link Test Enable (TPE Link Detect) + * + * on - AUXIO_LTE_ON or AUXIO_LTE_OFF + */ +#define auxio_set_lte(on) \ +do { \ + if(on) { \ + set_auxio(AUXIO_LINK_TEST, 0); \ + } else { \ + set_auxio(0, AUXIO_LINK_TEST); \ + } \ +} while (0) + +#define AUXIO_LED_ON 1 +#define AUXIO_LED_OFF 0 + +/* auxio_set_led - Set system front panel LED + * + * on - AUXIO_LED_ON or AUXIO_LED_OFF + */ +#define auxio_set_led(on) \ +do { \ + if(on) { \ + set_auxio(AUXIO_LED, 0); \ + } else { \ + set_auxio(0, AUXIO_LED); \ + } \ +} while (0) + +#endif /* !(__ASSEMBLY__) */ + + +/* AUXIO2 (Power Off Control) */ +extern __volatile__ unsigned char * auxio_power_register; + +#define AUXIO_POWER_DETECT_FAILURE 32 +#define AUXIO_POWER_CLEAR_FAILURE 2 +#define AUXIO_POWER_OFF 1 + + +#endif /* !(_SPARC_AUXIO_H) */ diff --git a/arch/sparc/include/asm/auxio_64.h b/arch/sparc/include/asm/auxio_64.h new file mode 100644 index 00000000000..f61cd1e3e39 --- /dev/null +++ b/arch/sparc/include/asm/auxio_64.h @@ -0,0 +1,100 @@ +/* + * auxio.h: Definitions and code for the Auxiliary I/O registers. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * + * Refactoring for unified NCR/PCIO support 2002 Eric Brower (ebrower@usa.net) + */ +#ifndef _SPARC64_AUXIO_H +#define _SPARC64_AUXIO_H + +/* AUXIO implementations: + * sbus-based NCR89C105 "Slavio" + * LED/Floppy (AUX1) register + * Power (AUX2) register + * + * ebus-based auxio on PCIO + * LED Auxio Register + * Power Auxio Register + * + * Register definitions from NCR _NCR89C105 Chip Specification_ + * + * SLAVIO AUX1 @ 0x1900000 + * ------------------------------------------------- + * | (R) | (R) | D | (R) | E | M | T | L | + * ------------------------------------------------- + * (R) - bit 7:6,4 are reserved and should be masked in s/w + * D - Floppy Density Sense (1=high density) R/O + * E - Link Test Enable, directly reflected on AT&T 7213 LTE pin + * M - Monitor/Mouse Mux, directly reflected on MON_MSE_MUX pin + * T - Terminal Count: sends TC pulse to 82077 floppy controller + * L - System LED on front panel (0=off, 1=on) + */ +#define AUXIO_AUX1_MASK 0xc0 /* Mask bits */ +#define AUXIO_AUX1_FDENS 0x20 /* Floppy Density Sense */ +#define AUXIO_AUX1_LTE 0x08 /* Link Test Enable */ +#define AUXIO_AUX1_MMUX 0x04 /* Monitor/Mouse Mux */ +#define AUXIO_AUX1_FTCNT 0x02 /* Terminal Count, */ +#define AUXIO_AUX1_LED 0x01 /* System LED */ + +/* SLAVIO AUX2 @ 0x1910000 + * ------------------------------------------------- + * | (R) | (R) | D | (R) | (R) | (R) | C | F | + * ------------------------------------------------- + * (R) - bits 7:6,4:2 are reserved and should be masked in s/w + * D - Power Failure Detect (1=power fail) + * C - Clear Power Failure Detect Int (1=clear) + * F - Power Off (1=power off) + */ +#define AUXIO_AUX2_MASK 0xdc /* Mask Bits */ +#define AUXIO_AUX2_PFAILDET 0x20 /* Power Fail Detect */ +#define AUXIO_AUX2_PFAILCLR 0x02 /* Clear Pwr Fail Det Intr */ +#define AUXIO_AUX2_PWR_OFF 0x01 /* Power Off */ + +/* Register definitions from Sun Microsystems _PCIO_ p/n 802-7837 + * + * PCIO LED Auxio @ 0x726000 + * ------------------------------------------------- + * | 31:1 Unused | LED | + * ------------------------------------------------- + * Bits 31:1 unused + * LED - System LED on front panel (0=off, 1=on) + */ +#define AUXIO_PCIO_LED 0x01 /* System LED */ + +/* PCIO Power Auxio @ 0x724000 + * ------------------------------------------------- + * | 31:2 Unused | CPO | SPO | + * ------------------------------------------------- + * Bits 31:2 unused + * CPO - Courtesy Power Off (1=off) + * SPO - System Power Off (1=off) + */ +#define AUXIO_PCIO_CPWR_OFF 0x02 /* Courtesy Power Off */ +#define AUXIO_PCIO_SPWR_OFF 0x01 /* System Power Off */ + +#ifndef __ASSEMBLY__ + +extern void __iomem *auxio_register; + +#define AUXIO_LTE_ON 1 +#define AUXIO_LTE_OFF 0 + +/* auxio_set_lte - Set Link Test Enable (TPE Link Detect) + * + * on - AUXIO_LTE_ON or AUXIO_LTE_OFF + */ +extern void auxio_set_lte(int on); + +#define AUXIO_LED_ON 1 +#define AUXIO_LED_OFF 0 + +/* auxio_set_led - Set system front panel LED + * + * on - AUXIO_LED_ON or AUXIO_LED_OFF + */ +extern void auxio_set_led(int on); + +#endif /* ifndef __ASSEMBLY__ */ + +#endif /* !(_SPARC64_AUXIO_H) */ diff --git a/arch/sparc/include/asm/auxvec.h b/arch/sparc/include/asm/auxvec.h new file mode 100644 index 00000000000..ad6f360261f --- /dev/null +++ b/arch/sparc/include/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __ASMSPARC_AUXVEC_H +#define __ASMSPARC_AUXVEC_H + +#endif /* !(__ASMSPARC_AUXVEC_H) */ diff --git a/arch/sparc/include/asm/backoff.h b/arch/sparc/include/asm/backoff.h new file mode 100644 index 00000000000..fa1fdf67e35 --- /dev/null +++ b/arch/sparc/include/asm/backoff.h @@ -0,0 +1,31 @@ +#ifndef _SPARC64_BACKOFF_H +#define _SPARC64_BACKOFF_H + +#define BACKOFF_LIMIT (4 * 1024) + +#ifdef CONFIG_SMP + +#define BACKOFF_SETUP(reg) \ + mov 1, reg + +#define BACKOFF_SPIN(reg, tmp, label) \ + mov reg, tmp; \ +88: brnz,pt tmp, 88b; \ + sub tmp, 1, tmp; \ + set BACKOFF_LIMIT, tmp; \ + cmp reg, tmp; \ + bg,pn %xcc, label; \ + nop; \ + ba,pt %xcc, label; \ + sllx reg, 1, reg; + +#else + +#define BACKOFF_SETUP(reg) +#define BACKOFF_SPIN(reg, tmp, label) \ + ba,pt %xcc, label; \ + nop; + +#endif + +#endif /* _SPARC64_BACKOFF_H */ diff --git a/arch/sparc/include/asm/bbc.h b/arch/sparc/include/asm/bbc.h new file mode 100644 index 00000000000..423a85800aa --- /dev/null +++ b/arch/sparc/include/asm/bbc.h @@ -0,0 +1,225 @@ +/* + * bbc.h: Defines for BootBus Controller found on UltraSPARC-III + * systems. + * + * Copyright (C) 2000 David S. Miller (davem@redhat.com) + */ + +#ifndef _SPARC64_BBC_H +#define _SPARC64_BBC_H + +/* Register sizes are indicated by "B" (Byte, 1-byte), + * "H" (Half-word, 2 bytes), "W" (Word, 4 bytes) or + * "Q" (Quad, 8 bytes) inside brackets. + */ + +#define BBC_AID 0x00 /* [B] Agent ID */ +#define BBC_DEVP 0x01 /* [B] Device Present */ +#define BBC_ARB 0x02 /* [B] Arbitration */ +#define BBC_QUIESCE 0x03 /* [B] Quiesce */ +#define BBC_WDACTION 0x04 /* [B] Watchdog Action */ +#define BBC_SPG 0x06 /* [B] Soft POR Gen */ +#define BBC_SXG 0x07 /* [B] Soft XIR Gen */ +#define BBC_PSRC 0x08 /* [W] POR Source */ +#define BBC_XSRC 0x0c /* [B] XIR Source */ +#define BBC_CSC 0x0d /* [B] Clock Synthesizers Control*/ +#define BBC_ES_CTRL 0x0e /* [H] Energy Star Control */ +#define BBC_ES_ACT 0x10 /* [W] E* Assert Change Time */ +#define BBC_ES_DACT 0x14 /* [B] E* De-Assert Change Time */ +#define BBC_ES_DABT 0x15 /* [B] E* De-Assert Bypass Time */ +#define BBC_ES_ABT 0x16 /* [H] E* Assert Bypass Time */ +#define BBC_ES_PST 0x18 /* [W] E* PLL Settle Time */ +#define BBC_ES_FSL 0x1c /* [W] E* Frequency Switch Latency*/ +#define BBC_EBUST 0x20 /* [Q] EBUS Timing */ +#define BBC_JTAG_CMD 0x28 /* [W] JTAG+ Command */ +#define BBC_JTAG_CTRL 0x2c /* [B] JTAG+ Control */ +#define BBC_I2C_SEL 0x2d /* [B] I2C Selection */ +#define BBC_I2C_0_S1 0x2e /* [B] I2C ctrlr-0 reg S1 */ +#define BBC_I2C_0_S0 0x2f /* [B] I2C ctrlr-0 regs S0,S0',S2,S3*/ +#define BBC_I2C_1_S1 0x30 /* [B] I2C ctrlr-1 reg S1 */ +#define BBC_I2C_1_S0 0x31 /* [B] I2C ctrlr-1 regs S0,S0',S2,S3*/ +#define BBC_KBD_BEEP 0x32 /* [B] Keyboard Beep */ +#define BBC_KBD_BCNT 0x34 /* [W] Keyboard Beep Counter */ + +#define BBC_REGS_SIZE 0x40 + +/* There is a 2K scratch ram area at offset 0x80000 but I doubt + * we will use it for anything. + */ + +/* Agent ID register. This register shows the Safari Agent ID + * for the processors. The value returned depends upon which + * cpu is reading the register. + */ +#define BBC_AID_ID 0x07 /* Safari ID */ +#define BBC_AID_RESV 0xf8 /* Reserved */ + +/* Device Present register. One can determine which cpus are actually + * present in the machine by interrogating this register. + */ +#define BBC_DEVP_CPU0 0x01 /* Processor 0 present */ +#define BBC_DEVP_CPU1 0x02 /* Processor 1 present */ +#define BBC_DEVP_CPU2 0x04 /* Processor 2 present */ +#define BBC_DEVP_CPU3 0x08 /* Processor 3 present */ +#define BBC_DEVP_RESV 0xf0 /* Reserved */ + +/* Arbitration register. This register is used to block access to + * the BBC from a particular cpu. + */ +#define BBC_ARB_CPU0 0x01 /* Enable cpu 0 BBC arbitratrion */ +#define BBC_ARB_CPU1 0x02 /* Enable cpu 1 BBC arbitratrion */ +#define BBC_ARB_CPU2 0x04 /* Enable cpu 2 BBC arbitratrion */ +#define BBC_ARB_CPU3 0x08 /* Enable cpu 3 BBC arbitratrion */ +#define BBC_ARB_RESV 0xf0 /* Reserved */ + +/* Quiesce register. Bus and BBC segments for cpus can be disabled + * with this register, ie. for hot plugging. + */ +#define BBC_QUIESCE_S02 0x01 /* Quiesce Safari segment for cpu 0 and 2 */ +#define BBC_QUIESCE_S13 0x02 /* Quiesce Safari segment for cpu 1 and 3 */ +#define BBC_QUIESCE_B02 0x04 /* Quiesce BBC segment for cpu 0 and 2 */ +#define BBC_QUIESCE_B13 0x08 /* Quiesce BBC segment for cpu 1 and 3 */ +#define BBC_QUIESCE_FD0 0x10 /* Disable Fatal_Error[0] reporting */ +#define BBC_QUIESCE_FD1 0x20 /* Disable Fatal_Error[1] reporting */ +#define BBC_QUIESCE_FD2 0x40 /* Disable Fatal_Error[2] reporting */ +#define BBC_QUIESCE_FD3 0x80 /* Disable Fatal_Error[3] reporting */ + +/* Watchdog Action register. When the watchdog device timer expires + * a line is enabled to the BBC. The action BBC takes when this line + * is asserted can be controlled by this regiser. + */ +#define BBC_WDACTION_RST 0x01 /* When set, watchdog causes system reset. + * When clear, BBC ignores watchdog signal. + */ +#define BBC_WDACTION_RESV 0xfe /* Reserved */ + +/* Soft_POR_GEN register. The POR (Power On Reset) signal may be asserted + * for specific processors or all processors via this register. + */ +#define BBC_SPG_CPU0 0x01 /* Assert POR for processor 0 */ +#define BBC_SPG_CPU1 0x02 /* Assert POR for processor 1 */ +#define BBC_SPG_CPU2 0x04 /* Assert POR for processor 2 */ +#define BBC_SPG_CPU3 0x08 /* Assert POR for processor 3 */ +#define BBC_SPG_CPUALL 0x10 /* Reset all processors and reset + * the entire system. + */ +#define BBC_SPG_RESV 0xe0 /* Reserved */ + +/* Soft_XIR_GEN register. The XIR (eXternally Initiated Reset) signal + * may be asserted to specific processors via this register. + */ +#define BBC_SXG_CPU0 0x01 /* Assert XIR for processor 0 */ +#define BBC_SXG_CPU1 0x02 /* Assert XIR for processor 1 */ +#define BBC_SXG_CPU2 0x04 /* Assert XIR for processor 2 */ +#define BBC_SXG_CPU3 0x08 /* Assert XIR for processor 3 */ +#define BBC_SXG_RESV 0xf0 /* Reserved */ + +/* POR Source register. One may identify the cause of the most recent + * reset by reading this register. + */ +#define BBC_PSRC_SPG0 0x0001 /* CPU 0 reset via BBC_SPG register */ +#define BBC_PSRC_SPG1 0x0002 /* CPU 1 reset via BBC_SPG register */ +#define BBC_PSRC_SPG2 0x0004 /* CPU 2 reset via BBC_SPG register */ +#define BBC_PSRC_SPG3 0x0008 /* CPU 3 reset via BBC_SPG register */ +#define BBC_PSRC_SPGSYS 0x0010 /* System reset via BBC_SPG register */ +#define BBC_PSRC_JTAG 0x0020 /* System reset via JTAG+ */ +#define BBC_PSRC_BUTTON 0x0040 /* System reset via push-button dongle */ +#define BBC_PSRC_PWRUP 0x0080 /* System reset via power-up */ +#define BBC_PSRC_FE0 0x0100 /* CPU 0 reported Fatal_Error */ +#define BBC_PSRC_FE1 0x0200 /* CPU 1 reported Fatal_Error */ +#define BBC_PSRC_FE2 0x0400 /* CPU 2 reported Fatal_Error */ +#define BBC_PSRC_FE3 0x0800 /* CPU 3 reported Fatal_Error */ +#define BBC_PSRC_FE4 0x1000 /* Schizo reported Fatal_Error */ +#define BBC_PSRC_FE5 0x2000 /* Safari device 5 reported Fatal_Error */ +#define BBC_PSRC_FE6 0x4000 /* CPMS reported Fatal_Error */ +#define BBC_PSRC_SYNTH 0x8000 /* System reset when on-board clock synthesizers + * were updated. + */ +#define BBC_PSRC_WDT 0x10000 /* System reset via Super I/O watchdog */ +#define BBC_PSRC_RSC 0x20000 /* System reset via RSC remote monitoring + * device + */ + +/* XIR Source register. The source of an XIR event sent to a processor may + * be determined via this register. + */ +#define BBC_XSRC_SXG0 0x01 /* CPU 0 received XIR via Soft_XIR_GEN reg */ +#define BBC_XSRC_SXG1 0x02 /* CPU 1 received XIR via Soft_XIR_GEN reg */ +#define BBC_XSRC_SXG2 0x04 /* CPU 2 received XIR via Soft_XIR_GEN reg */ +#define BBC_XSRC_SXG3 0x08 /* CPU 3 received XIR via Soft_XIR_GEN reg */ +#define BBC_XSRC_JTAG 0x10 /* All CPUs received XIR via JTAG+ */ +#define BBC_XSRC_W_OR_B 0x20 /* All CPUs received XIR either because: + * a) Super I/O watchdog fired, or + * b) XIR push button was activated + */ +#define BBC_XSRC_RESV 0xc0 /* Reserved */ + +/* Clock Synthesizers Control register. This register provides the big-bang + * programming interface to the two clock synthesizers of the machine. + */ +#define BBC_CSC_SLOAD 0x01 /* Directly connected to S_LOAD pins */ +#define BBC_CSC_SDATA 0x02 /* Directly connected to S_DATA pins */ +#define BBC_CSC_SCLOCK 0x04 /* Directly connected to S_CLOCK pins */ +#define BBC_CSC_RESV 0x78 /* Reserved */ +#define BBC_CSC_RST 0x80 /* Generate system reset when S_LOAD==1 */ + +/* Energy Star Control register. This register is used to generate the + * clock frequency change trigger to the main system devices (Schizo and + * the processors). The transition occurs when bits in this register + * go from 0 to 1, only one bit must be set at once else no action + * occurs. Basically the sequence of events is: + * a) Choose new frequency: full, 1/2 or 1/32 + * b) Program this desired frequency into the cpus and Schizo. + * c) Set the same value in this register. + * d) 16 system clocks later, clear this register. + */ +#define BBC_ES_CTRL_1_1 0x01 /* Full frequency */ +#define BBC_ES_CTRL_1_2 0x02 /* 1/2 frequency */ +#define BBC_ES_CTRL_1_32 0x20 /* 1/32 frequency */ +#define BBC_ES_RESV 0xdc /* Reserved */ + +/* Energy Star Assert Change Time register. This determines the number + * of BBC clock cycles (which is half the system frequency) between + * the detection of FREEZE_ACK being asserted and the assertion of + * the CLK_CHANGE_L[2:0] signals. + */ +#define BBC_ES_ACT_VAL 0xff + +/* Energy Star Assert Bypass Time register. This determines the number + * of BBC clock cycles (which is half the system frequency) between + * the assertion of the CLK_CHANGE_L[2:0] signals and the assertion of + * the ESTAR_PLL_BYPASS signal. + */ +#define BBC_ES_ABT_VAL 0xffff + +/* Energy Star PLL Settle Time register. This determines the number of + * BBC clock cycles (which is half the system frequency) between the + * de-assertion of CLK_CHANGE_L[2:0] and the de-assertion of the FREEZE_L + * signal. + */ +#define BBC_ES_PST_VAL 0xffffffff + +/* Energy Star Frequency Switch Latency register. This is the number of + * BBC clocks between the de-assertion of CLK_CHANGE_L[2:0] and the first + * edge of the Safari clock at the new frequency. + */ +#define BBC_ES_FSL_VAL 0xffffffff + +/* Keyboard Beep control register. This is a simple enabler for the audio + * beep sound. + */ +#define BBC_KBD_BEEP_ENABLE 0x01 /* Enable beep */ +#define BBC_KBD_BEEP_RESV 0xfe /* Reserved */ + +/* Keyboard Beep Counter register. There is a free-running counter inside + * the BBC which runs at half the system clock. The bit set in this register + * determines when the audio sound is generated. So for example if bit + * 10 is set, the audio beep will oscillate at 1/(2**12). The keyboard beep + * generator automatically selects a different bit to use if the system clock + * is changed via Energy Star. + */ +#define BBC_KBD_BCNT_BITS 0x0007fc00 +#define BBC_KBC_BCNT_RESV 0xfff803ff + +#endif /* _SPARC64_BBC_H */ + diff --git a/arch/sparc/include/asm/bitext.h b/arch/sparc/include/asm/bitext.h new file mode 100644 index 00000000000..297b2f2fcb4 --- /dev/null +++ b/arch/sparc/include/asm/bitext.h @@ -0,0 +1,27 @@ +/* + * bitext.h: Bit string operations on the sparc, specific to architecture. + * + * Copyright 2002 Pete Zaitcev <zaitcev@yahoo.com> + */ + +#ifndef _SPARC_BITEXT_H +#define _SPARC_BITEXT_H + +#include <linux/spinlock.h> + +struct bit_map { + spinlock_t lock; + unsigned long *map; + int size; + int used; + int last_off; + int last_size; + int first_free; + int num_colors; +}; + +extern int bit_map_string_get(struct bit_map *t, int len, int align); +extern void bit_map_clear(struct bit_map *t, int offset, int len); +extern void bit_map_init(struct bit_map *t, unsigned long *map, int size); + +#endif /* defined(_SPARC_BITEXT_H) */ diff --git a/arch/sparc/include/asm/bitops.h b/arch/sparc/include/asm/bitops.h new file mode 100644 index 00000000000..b1edd94bd64 --- /dev/null +++ b/arch/sparc/include/asm/bitops.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_BITOPS_H +#define ___ASM_SPARC_BITOPS_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/bitops_64.h> +#else +#include <asm/bitops_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/bitops_32.h b/arch/sparc/include/asm/bitops_32.h new file mode 100644 index 00000000000..68b98a7e645 --- /dev/null +++ b/arch/sparc/include/asm/bitops_32.h @@ -0,0 +1,111 @@ +/* + * bitops.h: Bit string operations on the Sparc. + * + * Copyright 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright 1996 Eddie C. Dost (ecd@skynet.be) + * Copyright 2001 Anton Blanchard (anton@samba.org) + */ + +#ifndef _SPARC_BITOPS_H +#define _SPARC_BITOPS_H + +#include <linux/compiler.h> +#include <asm/byteorder.h> + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only <linux/bitops.h> can be included directly +#endif + +extern unsigned long ___set_bit(unsigned long *addr, unsigned long mask); +extern unsigned long ___clear_bit(unsigned long *addr, unsigned long mask); +extern unsigned long ___change_bit(unsigned long *addr, unsigned long mask); + +/* + * Set bit 'nr' in 32-bit quantity at address 'addr' where bit '0' + * is in the highest of the four bytes and bit '31' is the high bit + * within the first byte. Sparc is BIG-Endian. Unless noted otherwise + * all bit-ops return 0 if bit was previously clear and != 0 otherwise. + */ +static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr) +{ + unsigned long *ADDR, mask; + + ADDR = ((unsigned long *) addr) + (nr >> 5); + mask = 1 << (nr & 31); + + return ___set_bit(ADDR, mask) != 0; +} + +static inline void set_bit(unsigned long nr, volatile unsigned long *addr) +{ + unsigned long *ADDR, mask; + + ADDR = ((unsigned long *) addr) + (nr >> 5); + mask = 1 << (nr & 31); + + (void) ___set_bit(ADDR, mask); +} + +static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) +{ + unsigned long *ADDR, mask; + + ADDR = ((unsigned long *) addr) + (nr >> 5); + mask = 1 << (nr & 31); + + return ___clear_bit(ADDR, mask) != 0; +} + +static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) +{ + unsigned long *ADDR, mask; + + ADDR = ((unsigned long *) addr) + (nr >> 5); + mask = 1 << (nr & 31); + + (void) ___clear_bit(ADDR, mask); +} + +static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr) +{ + unsigned long *ADDR, mask; + + ADDR = ((unsigned long *) addr) + (nr >> 5); + mask = 1 << (nr & 31); + + return ___change_bit(ADDR, mask) != 0; +} + +static inline void change_bit(unsigned long nr, volatile unsigned long *addr) +{ + unsigned long *ADDR, mask; + + ADDR = ((unsigned long *) addr) + (nr >> 5); + mask = 1 << (nr & 31); + + (void) ___change_bit(ADDR, mask); +} + +#include <asm-generic/bitops/non-atomic.h> + +#define smp_mb__before_clear_bit() do { } while(0) +#define smp_mb__after_clear_bit() do { } while(0) + +#include <asm-generic/bitops/ffz.h> +#include <asm-generic/bitops/__ffs.h> +#include <asm-generic/bitops/sched.h> +#include <asm-generic/bitops/ffs.h> +#include <asm-generic/bitops/fls.h> +#include <asm-generic/bitops/fls64.h> +#include <asm-generic/bitops/hweight.h> +#include <asm-generic/bitops/lock.h> +#include <asm-generic/bitops/find.h> +#include <asm-generic/bitops/ext2-non-atomic.h> +#include <asm-generic/bitops/ext2-atomic.h> +#include <asm-generic/bitops/minix.h> + +#endif /* __KERNEL__ */ + +#endif /* defined(_SPARC_BITOPS_H) */ diff --git a/arch/sparc/include/asm/bitops_64.h b/arch/sparc/include/asm/bitops_64.h new file mode 100644 index 00000000000..bb87b808022 --- /dev/null +++ b/arch/sparc/include/asm/bitops_64.h @@ -0,0 +1,107 @@ +/* + * bitops.h: Bit string operations on the V9. + * + * Copyright 1996, 1997 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC64_BITOPS_H +#define _SPARC64_BITOPS_H + +#ifndef _LINUX_BITOPS_H +#error only <linux/bitops.h> can be included directly +#endif + +#include <linux/compiler.h> +#include <asm/byteorder.h> + +extern int test_and_set_bit(unsigned long nr, volatile unsigned long *addr); +extern int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr); +extern int test_and_change_bit(unsigned long nr, volatile unsigned long *addr); +extern void set_bit(unsigned long nr, volatile unsigned long *addr); +extern void clear_bit(unsigned long nr, volatile unsigned long *addr); +extern void change_bit(unsigned long nr, volatile unsigned long *addr); + +#include <asm-generic/bitops/non-atomic.h> + +#ifdef CONFIG_SMP +#define smp_mb__before_clear_bit() membar_storeload_loadload() +#define smp_mb__after_clear_bit() membar_storeload_storestore() +#else +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() +#endif + +#include <asm-generic/bitops/ffz.h> +#include <asm-generic/bitops/__ffs.h> +#include <asm-generic/bitops/fls.h> +#include <asm-generic/bitops/__fls.h> +#include <asm-generic/bitops/fls64.h> + +#ifdef __KERNEL__ + +#include <asm-generic/bitops/sched.h> +#include <asm-generic/bitops/ffs.h> + +/* + * hweightN: returns the hamming weight (i.e. the number + * of bits set) of a N-bit word + */ + +#ifdef ULTRA_HAS_POPULATION_COUNT + +static inline unsigned int hweight64(unsigned long w) +{ + unsigned int res; + + __asm__ ("popc %1,%0" : "=r" (res) : "r" (w)); + return res; +} + +static inline unsigned int hweight32(unsigned int w) +{ + unsigned int res; + + __asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xffffffff)); + return res; +} + +static inline unsigned int hweight16(unsigned int w) +{ + unsigned int res; + + __asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xffff)); + return res; +} + +static inline unsigned int hweight8(unsigned int w) +{ + unsigned int res; + + __asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xff)); + return res; +} + +#else + +#include <asm-generic/bitops/hweight.h> + +#endif +#include <asm-generic/bitops/lock.h> +#endif /* __KERNEL__ */ + +#include <asm-generic/bitops/find.h> + +#ifdef __KERNEL__ + +#include <asm-generic/bitops/ext2-non-atomic.h> + +#define ext2_set_bit_atomic(lock,nr,addr) \ + test_and_set_bit((nr) ^ 0x38,(unsigned long *)(addr)) +#define ext2_clear_bit_atomic(lock,nr,addr) \ + test_and_clear_bit((nr) ^ 0x38,(unsigned long *)(addr)) + +#include <asm-generic/bitops/minix.h> + +#endif /* __KERNEL__ */ + +#endif /* defined(_SPARC64_BITOPS_H) */ diff --git a/arch/sparc/include/asm/bpp.h b/arch/sparc/include/asm/bpp.h new file mode 100644 index 00000000000..31f515e499a --- /dev/null +++ b/arch/sparc/include/asm/bpp.h @@ -0,0 +1,73 @@ +#ifndef _SPARC_BPP_H +#define _SPARC_BPP_H + +/* + * Copyright (c) 1995 Picture Elements + * Stephen Williams + * Gus Baldauf + * + * Linux/SPARC port by Peter Zaitcev. + * Integration into SPARC tree by Tom Dyas. + */ + +#include <linux/ioctl.h> + +/* + * This is a driver that supports IEEE Std 1284-1994 communications + * with compliant or compatible devices. It will use whatever features + * the device supports, prefering those that are typically faster. + * + * When the device is opened, it is left in COMPATIBILITY mode, and + * writes work like any printer device. The driver only attempt to + * negotiate 1284 modes when needed so that plugs can be pulled, + * switch boxes switched, etc., without disrupting things. It will + * also leave the device in compatibility mode when closed. + */ + + + +/* + * This driver also supplies ioctls to manually manipulate the + * pins. This is great for testing devices, or writing code to deal + * with bizzarro-mode of the ACME Special TurboThingy Plus. + * + * NOTE: These ioctl currently do not interact well with + * read/write. Caveat emptor. + * + * PUT_PINS allows us to assign the sense of all the pins, including + * the data pins if being driven by the host. The GET_PINS returns the + * pins that the peripheral drives, including data if appropriate. + */ + +# define BPP_PUT_PINS _IOW('B', 1, int) +# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */ +# define BPP_PUT_DATA _IOW('B', 3, int) +# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */ + +/* + * Set the data bus to input mode. Disengage the data bin driver and + * be prepared to read values from the peripheral. If the arg is 0, + * then revert the bus to output mode. + */ +# define BPP_SET_INPUT _IOW('B', 5, int) + +/* + * These bits apply to the PUT operation... + */ +# define BPP_PP_nStrobe 0x0001 +# define BPP_PP_nAutoFd 0x0002 +# define BPP_PP_nInit 0x0004 +# define BPP_PP_nSelectIn 0x0008 + +/* + * These apply to the GET operation, which also reads the current value + * of the previously put values. A bit mask of these will be returned + * as a bit mask in the return code of the ioctl(). + */ +# define BPP_GP_nAck 0x0100 +# define BPP_GP_Busy 0x0200 +# define BPP_GP_PError 0x0400 +# define BPP_GP_Select 0x0800 +# define BPP_GP_nFault 0x1000 + +#endif diff --git a/arch/sparc/include/asm/btfixup.h b/arch/sparc/include/asm/btfixup.h new file mode 100644 index 00000000000..797722cf69f --- /dev/null +++ b/arch/sparc/include/asm/btfixup.h @@ -0,0 +1,208 @@ +/* + * asm/btfixup.h: Macros for boot time linking. + * + * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ + +#ifndef _SPARC_BTFIXUP_H +#define _SPARC_BTFIXUP_H + +#include <linux/init.h> + +#ifndef __ASSEMBLY__ + +#ifdef MODULE +extern unsigned int ___illegal_use_of_BTFIXUP_SIMM13_in_module(void); +extern unsigned int ___illegal_use_of_BTFIXUP_SETHI_in_module(void); +extern unsigned int ___illegal_use_of_BTFIXUP_HALF_in_module(void); +extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void); + +#define BTFIXUP_SIMM13(__name) ___illegal_use_of_BTFIXUP_SIMM13_in_module() +#define BTFIXUP_HALF(__name) ___illegal_use_of_BTFIXUP_HALF_in_module() +#define BTFIXUP_SETHI(__name) ___illegal_use_of_BTFIXUP_SETHI_in_module() +#define BTFIXUP_INT(__name) ___illegal_use_of_BTFIXUP_INT_in_module() +#define BTFIXUP_BLACKBOX(__name) ___illegal_use_of_BTFIXUP_BLACKBOX_in_module + +#else + +#define BTFIXUP_SIMM13(__name) ___sf_##__name() +#define BTFIXUP_HALF(__name) ___af_##__name() +#define BTFIXUP_SETHI(__name) ___hf_##__name() +#define BTFIXUP_INT(__name) ((unsigned int)&___i_##__name) +/* This must be written in assembly and present in a sethi */ +#define BTFIXUP_BLACKBOX(__name) ___b_##__name +#endif /* MODULE */ + +/* Fixup call xx */ + +#define BTFIXUPDEF_CALL(__type, __name, __args...) \ + extern __type ___f_##__name(__args); \ + extern unsigned ___fs_##__name[3]; +#define BTFIXUPDEF_CALL_CONST(__type, __name, __args...) \ + extern __type ___f_##__name(__args) __attribute_const__; \ + extern unsigned ___fs_##__name[3]; +#define BTFIXUP_CALL(__name) ___f_##__name + +#define BTFIXUPDEF_BLACKBOX(__name) \ + extern unsigned ___bs_##__name[2]; + +/* Put bottom 13bits into some register variable */ + +#define BTFIXUPDEF_SIMM13(__name) \ + static inline unsigned int ___sf_##__name(void) __attribute_const__; \ + extern unsigned ___ss_##__name[2]; \ + static inline unsigned int ___sf_##__name(void) { \ + unsigned int ret; \ + __asm__ ("or %%g0, ___s_" #__name ", %0" : "=r"(ret)); \ + return ret; \ + } +#define BTFIXUPDEF_SIMM13_INIT(__name,__val) \ + static inline unsigned int ___sf_##__name(void) __attribute_const__; \ + extern unsigned ___ss_##__name[2]; \ + static inline unsigned int ___sf_##__name(void) { \ + unsigned int ret; \ + __asm__ ("or %%g0, ___s_" #__name "__btset_" #__val ", %0" : "=r"(ret));\ + return ret; \ + } + +/* Put either bottom 13 bits, or upper 22 bits into some register variable + * (depending on the value, this will lead into sethi FIX, reg; or + * mov FIX, reg; ) + */ + +#define BTFIXUPDEF_HALF(__name) \ + static inline unsigned int ___af_##__name(void) __attribute_const__; \ + extern unsigned ___as_##__name[2]; \ + static inline unsigned int ___af_##__name(void) { \ + unsigned int ret; \ + __asm__ ("or %%g0, ___a_" #__name ", %0" : "=r"(ret)); \ + return ret; \ + } +#define BTFIXUPDEF_HALF_INIT(__name,__val) \ + static inline unsigned int ___af_##__name(void) __attribute_const__; \ + extern unsigned ___as_##__name[2]; \ + static inline unsigned int ___af_##__name(void) { \ + unsigned int ret; \ + __asm__ ("or %%g0, ___a_" #__name "__btset_" #__val ", %0" : "=r"(ret));\ + return ret; \ + } + +/* Put upper 22 bits into some register variable */ + +#define BTFIXUPDEF_SETHI(__name) \ + static inline unsigned int ___hf_##__name(void) __attribute_const__; \ + extern unsigned ___hs_##__name[2]; \ + static inline unsigned int ___hf_##__name(void) { \ + unsigned int ret; \ + __asm__ ("sethi %%hi(___h_" #__name "), %0" : "=r"(ret)); \ + return ret; \ + } +#define BTFIXUPDEF_SETHI_INIT(__name,__val) \ + static inline unsigned int ___hf_##__name(void) __attribute_const__; \ + extern unsigned ___hs_##__name[2]; \ + static inline unsigned int ___hf_##__name(void) { \ + unsigned int ret; \ + __asm__ ("sethi %%hi(___h_" #__name "__btset_" #__val "), %0" : \ + "=r"(ret)); \ + return ret; \ + } + +/* Put a full 32bit integer into some register variable */ + +#define BTFIXUPDEF_INT(__name) \ + extern unsigned char ___i_##__name; \ + extern unsigned ___is_##__name[2]; + +#define BTFIXUPCALL_NORM 0x00000000 /* Always call */ +#define BTFIXUPCALL_NOP 0x01000000 /* Possibly optimize to nop */ +#define BTFIXUPCALL_RETINT(i) (0x90102000|((i) & 0x1fff)) /* Possibly optimize to mov i, %o0 */ +#define BTFIXUPCALL_ORINT(i) (0x90122000|((i) & 0x1fff)) /* Possibly optimize to or %o0, i, %o0 */ +#define BTFIXUPCALL_RETO0 0x01000000 /* Return first parameter, actually a nop */ +#define BTFIXUPCALL_ANDNINT(i) (0x902a2000|((i) & 0x1fff)) /* Possibly optimize to andn %o0, i, %o0 */ +#define BTFIXUPCALL_SWAPO0O1 0xd27a0000 /* Possibly optimize to swap [%o0],%o1 */ +#define BTFIXUPCALL_SWAPO0G0 0xc07a0000 /* Possibly optimize to swap [%o0],%g0 */ +#define BTFIXUPCALL_SWAPG1G2 0xc4784000 /* Possibly optimize to swap [%g1],%g2 */ +#define BTFIXUPCALL_STG0O0 0xc0220000 /* Possibly optimize to st %g0,[%o0] */ +#define BTFIXUPCALL_STO1O0 0xd2220000 /* Possibly optimize to st %o1,[%o0] */ + +#define BTFIXUPSET_CALL(__name, __addr, __insn) \ + do { \ + ___fs_##__name[0] |= 1; \ + ___fs_##__name[1] = (unsigned long)__addr; \ + ___fs_##__name[2] = __insn; \ + } while (0) + +#define BTFIXUPSET_BLACKBOX(__name, __func) \ + do { \ + ___bs_##__name[0] |= 1; \ + ___bs_##__name[1] = (unsigned long)__func; \ + } while (0) + +#define BTFIXUPCOPY_CALL(__name, __from) \ + do { \ + ___fs_##__name[0] |= 1; \ + ___fs_##__name[1] = ___fs_##__from[1]; \ + ___fs_##__name[2] = ___fs_##__from[2]; \ + } while (0) + +#define BTFIXUPSET_SIMM13(__name, __val) \ + do { \ + ___ss_##__name[0] |= 1; \ + ___ss_##__name[1] = (unsigned)__val; \ + } while (0) + +#define BTFIXUPCOPY_SIMM13(__name, __from) \ + do { \ + ___ss_##__name[0] |= 1; \ + ___ss_##__name[1] = ___ss_##__from[1]; \ + } while (0) + +#define BTFIXUPSET_HALF(__name, __val) \ + do { \ + ___as_##__name[0] |= 1; \ + ___as_##__name[1] = (unsigned)__val; \ + } while (0) + +#define BTFIXUPCOPY_HALF(__name, __from) \ + do { \ + ___as_##__name[0] |= 1; \ + ___as_##__name[1] = ___as_##__from[1]; \ + } while (0) + +#define BTFIXUPSET_SETHI(__name, __val) \ + do { \ + ___hs_##__name[0] |= 1; \ + ___hs_##__name[1] = (unsigned)__val; \ + } while (0) + +#define BTFIXUPCOPY_SETHI(__name, __from) \ + do { \ + ___hs_##__name[0] |= 1; \ + ___hs_##__name[1] = ___hs_##__from[1]; \ + } while (0) + +#define BTFIXUPSET_INT(__name, __val) \ + do { \ + ___is_##__name[0] |= 1; \ + ___is_##__name[1] = (unsigned)__val; \ + } while (0) + +#define BTFIXUPCOPY_INT(__name, __from) \ + do { \ + ___is_##__name[0] |= 1; \ + ___is_##__name[1] = ___is_##__from[1]; \ + } while (0) + +#define BTFIXUPVAL_CALL(__name) \ + ((unsigned long)___fs_##__name[1]) + +extern void btfixup(void); + +#else /* __ASSEMBLY__ */ + +#define BTFIXUP_SETHI(__name) %hi(___h_ ## __name) +#define BTFIXUP_SETHI_INIT(__name,__val) %hi(___h_ ## __name ## __btset_ ## __val) + +#endif /* __ASSEMBLY__ */ + +#endif /* !(_SPARC_BTFIXUP_H) */ diff --git a/arch/sparc/include/asm/bug.h b/arch/sparc/include/asm/bug.h new file mode 100644 index 00000000000..8a59e5a8c21 --- /dev/null +++ b/arch/sparc/include/asm/bug.h @@ -0,0 +1,22 @@ +#ifndef _SPARC_BUG_H +#define _SPARC_BUG_H + +#ifdef CONFIG_BUG +#include <linux/compiler.h> + +#ifdef CONFIG_DEBUG_BUGVERBOSE +extern void do_BUG(const char *file, int line); +#define BUG() do { \ + do_BUG(__FILE__, __LINE__); \ + __builtin_trap(); \ +} while (0) +#else +#define BUG() __builtin_trap() +#endif + +#define HAVE_ARCH_BUG +#endif + +#include <asm-generic/bug.h> + +#endif diff --git a/arch/sparc/include/asm/bugs.h b/arch/sparc/include/asm/bugs.h new file mode 100644 index 00000000000..e179bc12f64 --- /dev/null +++ b/arch/sparc/include/asm/bugs.h @@ -0,0 +1,24 @@ +/* include/asm/bugs.h: Sparc probes for various bugs. + * + * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net) + */ + +#ifdef CONFIG_SPARC32 +#include <asm/cpudata.h> +#endif + +#ifdef CONFIG_SPARC64 +#include <asm/sstate.h> +#endif + +extern unsigned long loops_per_jiffy; + +static void __init check_bugs(void) +{ +#if defined(CONFIG_SPARC32) && !defined(CONFIG_SMP) + cpu_data(0).udelay_val = loops_per_jiffy; +#endif +#ifdef CONFIG_SPARC64 + sstate_running(); +#endif +} diff --git a/arch/sparc/include/asm/byteorder.h b/arch/sparc/include/asm/byteorder.h new file mode 100644 index 00000000000..bcd83aa351c --- /dev/null +++ b/arch/sparc/include/asm/byteorder.h @@ -0,0 +1,57 @@ +#ifndef _SPARC_BYTEORDER_H +#define _SPARC_BYTEORDER_H + +#include <asm/types.h> +#include <asm/asi.h> + +#ifdef __GNUC__ + +#ifdef CONFIG_SPARC32 +#define __SWAB_64_THRU_32__ +#endif + +#ifdef CONFIG_SPARC64 + +static inline __u16 ___arch__swab16p(const __u16 *addr) +{ + __u16 ret; + + __asm__ __volatile__ ("lduha [%1] %2, %0" + : "=r" (ret) + : "r" (addr), "i" (ASI_PL)); + return ret; +} + +static inline __u32 ___arch__swab32p(const __u32 *addr) +{ + __u32 ret; + + __asm__ __volatile__ ("lduwa [%1] %2, %0" + : "=r" (ret) + : "r" (addr), "i" (ASI_PL)); + return ret; +} + +static inline __u64 ___arch__swab64p(const __u64 *addr) +{ + __u64 ret; + + __asm__ __volatile__ ("ldxa [%1] %2, %0" + : "=r" (ret) + : "r" (addr), "i" (ASI_PL)); + return ret; +} + +#define __arch__swab16p(x) ___arch__swab16p(x) +#define __arch__swab32p(x) ___arch__swab32p(x) +#define __arch__swab64p(x) ___arch__swab64p(x) + +#endif /* CONFIG_SPARC64 */ + +#define __BYTEORDER_HAS_U64__ + +#endif + +#include <linux/byteorder/big_endian.h> + +#endif /* _SPARC_BYTEORDER_H */ diff --git a/arch/sparc/include/asm/cache.h b/arch/sparc/include/asm/cache.h new file mode 100644 index 00000000000..41f85ae4bd4 --- /dev/null +++ b/arch/sparc/include/asm/cache.h @@ -0,0 +1,138 @@ +/* cache.h: Cache specific code for the Sparc. These include flushing + * and direct tag/data line access. + * + * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net) + */ + +#ifndef _SPARC_CACHE_H +#define _SPARC_CACHE_H + +#define L1_CACHE_SHIFT 5 +#define L1_CACHE_BYTES 32 +#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))) + +#ifdef CONFIG_SPARC32 +#define SMP_CACHE_BYTES_SHIFT 5 +#else +#define SMP_CACHE_BYTES_SHIFT 6 +#endif + +#define SMP_CACHE_BYTES (1 << SMP_CACHE_BYTES_SHIFT) + +#define __read_mostly __attribute__((__section__(".data.read_mostly"))) + +#ifdef CONFIG_SPARC32 +#include <asm/asi.h> + +/* Direct access to the instruction cache is provided through and + * alternate address space. The IDC bit must be off in the ICCR on + * HyperSparcs for these accesses to work. The code below does not do + * any checking, the caller must do so. These routines are for + * diagnostics only, but could end up being useful. Use with care. + * Also, you are asking for trouble if you execute these in one of the + * three instructions following a %asr/%psr access or modification. + */ + +/* First, cache-tag access. */ +static inline unsigned int get_icache_tag(int setnum, int tagnum) +{ + unsigned int vaddr, retval; + + vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5); + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (retval) : + "r" (vaddr), "i" (ASI_M_TXTC_TAG)); + return retval; +} + +static inline void put_icache_tag(int setnum, int tagnum, unsigned int entry) +{ + unsigned int vaddr; + + vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5); + __asm__ __volatile__("sta %0, [%1] %2\n\t" : : + "r" (entry), "r" (vaddr), "i" (ASI_M_TXTC_TAG) : + "memory"); +} + +/* Second cache-data access. The data is returned two-32bit quantities + * at a time. + */ +static inline void get_icache_data(int setnum, int tagnum, int subblock, + unsigned int *data) +{ + unsigned int value1, value2, vaddr; + + vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) | + ((subblock&0x3) << 3); + __asm__ __volatile__("ldda [%2] %3, %%g2\n\t" + "or %%g0, %%g2, %0\n\t" + "or %%g0, %%g3, %1\n\t" : + "=r" (value1), "=r" (value2) : + "r" (vaddr), "i" (ASI_M_TXTC_DATA) : + "g2", "g3"); + data[0] = value1; data[1] = value2; +} + +static inline void put_icache_data(int setnum, int tagnum, int subblock, + unsigned int *data) +{ + unsigned int value1, value2, vaddr; + + vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) | + ((subblock&0x3) << 3); + value1 = data[0]; value2 = data[1]; + __asm__ __volatile__("or %%g0, %0, %%g2\n\t" + "or %%g0, %1, %%g3\n\t" + "stda %%g2, [%2] %3\n\t" : : + "r" (value1), "r" (value2), + "r" (vaddr), "i" (ASI_M_TXTC_DATA) : + "g2", "g3", "memory" /* no joke */); +} + +/* Different types of flushes with the ICACHE. Some of the flushes + * affect both the ICACHE and the external cache. Others only clear + * the ICACHE entries on the cpu itself. V8's (most) allow + * granularity of flushes on the packet (element in line), whole line, + * and entire cache (ie. all lines) level. The ICACHE only flushes are + * ROSS HyperSparc specific and are in ross.h + */ + +/* Flushes which clear out both the on-chip and external caches */ +static inline void flush_ei_page(unsigned int addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : + "r" (addr), "i" (ASI_M_FLUSH_PAGE) : + "memory"); +} + +static inline void flush_ei_seg(unsigned int addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : + "r" (addr), "i" (ASI_M_FLUSH_SEG) : + "memory"); +} + +static inline void flush_ei_region(unsigned int addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : + "r" (addr), "i" (ASI_M_FLUSH_REGION) : + "memory"); +} + +static inline void flush_ei_ctx(unsigned int addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : + "r" (addr), "i" (ASI_M_FLUSH_CTX) : + "memory"); +} + +static inline void flush_ei_user(unsigned int addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : + "r" (addr), "i" (ASI_M_FLUSH_USER) : + "memory"); +} +#endif /* CONFIG_SPARC32 */ + +#endif /* !(_SPARC_CACHE_H) */ diff --git a/arch/sparc/include/asm/cacheflush.h b/arch/sparc/include/asm/cacheflush.h new file mode 100644 index 00000000000..049168087b1 --- /dev/null +++ b/arch/sparc/include/asm/cacheflush.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_CACHEFLUSH_H +#define ___ASM_SPARC_CACHEFLUSH_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/cacheflush_64.h> +#else +#include <asm/cacheflush_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/cacheflush_32.h b/arch/sparc/include/asm/cacheflush_32.h new file mode 100644 index 00000000000..68ac1091027 --- /dev/null +++ b/arch/sparc/include/asm/cacheflush_32.h @@ -0,0 +1,85 @@ +#ifndef _SPARC_CACHEFLUSH_H +#define _SPARC_CACHEFLUSH_H + +#include <linux/mm.h> /* Common for other includes */ +// #include <linux/kernel.h> from pgalloc.h +// #include <linux/sched.h> from pgalloc.h + +// #include <asm/page.h> +#include <asm/btfixup.h> + +/* + * Fine grained cache flushing. + */ +#ifdef CONFIG_SMP + +BTFIXUPDEF_CALL(void, local_flush_cache_all, void) +BTFIXUPDEF_CALL(void, local_flush_cache_mm, struct mm_struct *) +BTFIXUPDEF_CALL(void, local_flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long) +BTFIXUPDEF_CALL(void, local_flush_cache_page, struct vm_area_struct *, unsigned long) + +#define local_flush_cache_all() BTFIXUP_CALL(local_flush_cache_all)() +#define local_flush_cache_mm(mm) BTFIXUP_CALL(local_flush_cache_mm)(mm) +#define local_flush_cache_range(vma,start,end) BTFIXUP_CALL(local_flush_cache_range)(vma,start,end) +#define local_flush_cache_page(vma,addr) BTFIXUP_CALL(local_flush_cache_page)(vma,addr) + +BTFIXUPDEF_CALL(void, local_flush_page_to_ram, unsigned long) +BTFIXUPDEF_CALL(void, local_flush_sig_insns, struct mm_struct *, unsigned long) + +#define local_flush_page_to_ram(addr) BTFIXUP_CALL(local_flush_page_to_ram)(addr) +#define local_flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(local_flush_sig_insns)(mm,insn_addr) + +extern void smp_flush_cache_all(void); +extern void smp_flush_cache_mm(struct mm_struct *mm); +extern void smp_flush_cache_range(struct vm_area_struct *vma, + unsigned long start, + unsigned long end); +extern void smp_flush_cache_page(struct vm_area_struct *vma, unsigned long page); + +extern void smp_flush_page_to_ram(unsigned long page); +extern void smp_flush_sig_insns(struct mm_struct *mm, unsigned long insn_addr); + +#endif /* CONFIG_SMP */ + +BTFIXUPDEF_CALL(void, flush_cache_all, void) +BTFIXUPDEF_CALL(void, flush_cache_mm, struct mm_struct *) +BTFIXUPDEF_CALL(void, flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long) +BTFIXUPDEF_CALL(void, flush_cache_page, struct vm_area_struct *, unsigned long) + +#define flush_cache_all() BTFIXUP_CALL(flush_cache_all)() +#define flush_cache_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm) +#define flush_cache_dup_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm) +#define flush_cache_range(vma,start,end) BTFIXUP_CALL(flush_cache_range)(vma,start,end) +#define flush_cache_page(vma,addr,pfn) BTFIXUP_CALL(flush_cache_page)(vma,addr) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma, pg) do { } while (0) + +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + flush_cache_page(vma, vaddr, page_to_pfn(page));\ + memcpy(dst, src, len); \ + } while (0) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + flush_cache_page(vma, vaddr, page_to_pfn(page));\ + memcpy(dst, src, len); \ + } while (0) + +BTFIXUPDEF_CALL(void, __flush_page_to_ram, unsigned long) +BTFIXUPDEF_CALL(void, flush_sig_insns, struct mm_struct *, unsigned long) + +#define __flush_page_to_ram(addr) BTFIXUP_CALL(__flush_page_to_ram)(addr) +#define flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(flush_sig_insns)(mm,insn_addr) + +extern void sparc_flush_page_to_ram(struct page *page); + +#define flush_dcache_page(page) sparc_flush_page_to_ram(page) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +#define flush_cache_vmap(start, end) flush_cache_all() +#define flush_cache_vunmap(start, end) flush_cache_all() + +#endif /* _SPARC_CACHEFLUSH_H */ diff --git a/arch/sparc/include/asm/cacheflush_64.h b/arch/sparc/include/asm/cacheflush_64.h new file mode 100644 index 00000000000..c43321729b3 --- /dev/null +++ b/arch/sparc/include/asm/cacheflush_64.h @@ -0,0 +1,76 @@ +#ifndef _SPARC64_CACHEFLUSH_H +#define _SPARC64_CACHEFLUSH_H + +#include <asm/page.h> + +#ifndef __ASSEMBLY__ + +#include <linux/mm.h> + +/* Cache flush operations. */ + +/* These are the same regardless of whether this is an SMP kernel or not. */ +#define flush_cache_mm(__mm) \ + do { if ((__mm) == current->mm) flushw_user(); } while(0) +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) +#define flush_cache_range(vma, start, end) \ + flush_cache_mm((vma)->vm_mm) +#define flush_cache_page(vma, page, pfn) \ + flush_cache_mm((vma)->vm_mm) + +/* + * On spitfire, the icache doesn't snoop local stores and we don't + * use block commit stores (which invalidate icache lines) during + * module load, so we need this. + */ +extern void flush_icache_range(unsigned long start, unsigned long end); +extern void __flush_icache_page(unsigned long); + +extern void __flush_dcache_page(void *addr, int flush_icache); +extern void flush_dcache_page_impl(struct page *page); +#ifdef CONFIG_SMP +extern void smp_flush_dcache_page_impl(struct page *page, int cpu); +extern void flush_dcache_page_all(struct mm_struct *mm, struct page *page); +#else +#define smp_flush_dcache_page_impl(page,cpu) flush_dcache_page_impl(page) +#define flush_dcache_page_all(mm,page) flush_dcache_page_impl(page) +#endif + +extern void __flush_dcache_range(unsigned long start, unsigned long end); +extern void flush_dcache_page(struct page *page); + +#define flush_icache_page(vma, pg) do { } while(0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) + +extern void flush_ptrace_access(struct vm_area_struct *, struct page *, + unsigned long uaddr, void *kaddr, + unsigned long len, int write); + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + flush_cache_page(vma, vaddr, page_to_pfn(page)); \ + memcpy(dst, src, len); \ + flush_ptrace_access(vma, page, vaddr, src, len, 0); \ + } while (0) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + flush_cache_page(vma, vaddr, page_to_pfn(page)); \ + memcpy(dst, src, len); \ + flush_ptrace_access(vma, page, vaddr, dst, len, 1); \ + } while (0) + +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +#ifdef CONFIG_DEBUG_PAGEALLOC +/* internal debugging function */ +void kernel_map_pages(struct page *page, int numpages, int enable); +#endif + +#endif /* !__ASSEMBLY__ */ + +#endif /* _SPARC64_CACHEFLUSH_H */ diff --git a/arch/sparc/include/asm/chafsr.h b/arch/sparc/include/asm/chafsr.h new file mode 100644 index 00000000000..85c69b38220 --- /dev/null +++ b/arch/sparc/include/asm/chafsr.h @@ -0,0 +1,241 @@ +#ifndef _SPARC64_CHAFSR_H +#define _SPARC64_CHAFSR_H + +/* Cheetah Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */ + +/* Comments indicate which processor variants on which the bit definition + * is valid. Codes are: + * ch --> cheetah + * ch+ --> cheetah plus + * jp --> jalapeno + */ + +/* All bits of this register except M_SYNDROME and E_SYNDROME are + * read, write 1 to clear. M_SYNDROME and E_SYNDROME are read-only. + */ + +/* Software bit set by linux trap handlers to indicate that the trap was + * signalled at %tl >= 1. + */ +#define CHAFSR_TL1 (1UL << 63UL) /* n/a */ + +/* Unmapped error from system bus for prefetch queue or + * store queue read operation + */ +#define CHPAFSR_DTO (1UL << 59UL) /* ch+ */ + +/* Bus error from system bus for prefetch queue or store queue + * read operation + */ +#define CHPAFSR_DBERR (1UL << 58UL) /* ch+ */ + +/* Hardware corrected E-cache Tag ECC error */ +#define CHPAFSR_THCE (1UL << 57UL) /* ch+ */ +/* System interface protocol error, hw timeout caused */ +#define JPAFSR_JETO (1UL << 57UL) /* jp */ + +/* SW handled correctable E-cache Tag ECC error */ +#define CHPAFSR_TSCE (1UL << 56UL) /* ch+ */ +/* Parity error on system snoop results */ +#define JPAFSR_SCE (1UL << 56UL) /* jp */ + +/* Uncorrectable E-cache Tag ECC error */ +#define CHPAFSR_TUE (1UL << 55UL) /* ch+ */ +/* System interface protocol error, illegal command detected */ +#define JPAFSR_JEIC (1UL << 55UL) /* jp */ + +/* Uncorrectable system bus data ECC error due to prefetch + * or store fill request + */ +#define CHPAFSR_DUE (1UL << 54UL) /* ch+ */ +/* System interface protocol error, illegal ADTYPE detected */ +#define JPAFSR_JEIT (1UL << 54UL) /* jp */ + +/* Multiple errors of the same type have occurred. This bit is set when + * an uncorrectable error or a SW correctable error occurs and the status + * bit to report that error is already set. When multiple errors of + * different types are indicated by setting multiple status bits. + * + * This bit is not set if multiple HW corrected errors with the same + * status bit occur, only uncorrectable and SW correctable ones have + * this behavior. + * + * This bit is not set when multiple ECC errors happen within a single + * 64-byte system bus transaction. Only the first ECC error in a 16-byte + * subunit will be logged. All errors in subsequent 16-byte subunits + * from the same 64-byte transaction are ignored. + */ +#define CHAFSR_ME (1UL << 53UL) /* ch,ch+,jp */ + +/* Privileged state error has occurred. This is a capture of PSTATE.PRIV + * at the time the error is detected. + */ +#define CHAFSR_PRIV (1UL << 52UL) /* ch,ch+,jp */ + +/* The following bits 51 (CHAFSR_PERR) to 33 (CHAFSR_CE) are sticky error + * bits and record the most recently detected errors. Bits accumulate + * errors that have been detected since the last write to clear the bit. + */ + +/* System interface protocol error. The processor asserts its' ERROR + * pin when this event occurs and it also logs a specific cause code + * into a JTAG scannable flop. + */ +#define CHAFSR_PERR (1UL << 51UL) /* ch,ch+,jp */ + +/* Internal processor error. The processor asserts its' ERROR + * pin when this event occurs and it also logs a specific cause code + * into a JTAG scannable flop. + */ +#define CHAFSR_IERR (1UL << 50UL) /* ch,ch+,jp */ + +/* System request parity error on incoming address */ +#define CHAFSR_ISAP (1UL << 49UL) /* ch,ch+,jp */ + +/* HW Corrected system bus MTAG ECC error */ +#define CHAFSR_EMC (1UL << 48UL) /* ch,ch+ */ +/* Parity error on L2 cache tag SRAM */ +#define JPAFSR_ETP (1UL << 48UL) /* jp */ + +/* Uncorrectable system bus MTAG ECC error */ +#define CHAFSR_EMU (1UL << 47UL) /* ch,ch+ */ +/* Out of range memory error has occurred */ +#define JPAFSR_OM (1UL << 47UL) /* jp */ + +/* HW Corrected system bus data ECC error for read of interrupt vector */ +#define CHAFSR_IVC (1UL << 46UL) /* ch,ch+ */ +/* Error due to unsupported store */ +#define JPAFSR_UMS (1UL << 46UL) /* jp */ + +/* Uncorrectable system bus data ECC error for read of interrupt vector */ +#define CHAFSR_IVU (1UL << 45UL) /* ch,ch+,jp */ + +/* Unmapped error from system bus */ +#define CHAFSR_TO (1UL << 44UL) /* ch,ch+,jp */ + +/* Bus error response from system bus */ +#define CHAFSR_BERR (1UL << 43UL) /* ch,ch+,jp */ + +/* SW Correctable E-cache ECC error for instruction fetch or data access + * other than block load. + */ +#define CHAFSR_UCC (1UL << 42UL) /* ch,ch+,jp */ + +/* Uncorrectable E-cache ECC error for instruction fetch or data access + * other than block load. + */ +#define CHAFSR_UCU (1UL << 41UL) /* ch,ch+,jp */ + +/* Copyout HW Corrected ECC error */ +#define CHAFSR_CPC (1UL << 40UL) /* ch,ch+,jp */ + +/* Copyout Uncorrectable ECC error */ +#define CHAFSR_CPU (1UL << 39UL) /* ch,ch+,jp */ + +/* HW Corrected ECC error from E-cache for writeback */ +#define CHAFSR_WDC (1UL << 38UL) /* ch,ch+,jp */ + +/* Uncorrectable ECC error from E-cache for writeback */ +#define CHAFSR_WDU (1UL << 37UL) /* ch,ch+,jp */ + +/* HW Corrected ECC error from E-cache for store merge or block load */ +#define CHAFSR_EDC (1UL << 36UL) /* ch,ch+,jp */ + +/* Uncorrectable ECC error from E-cache for store merge or block load */ +#define CHAFSR_EDU (1UL << 35UL) /* ch,ch+,jp */ + +/* Uncorrectable system bus data ECC error for read of memory or I/O */ +#define CHAFSR_UE (1UL << 34UL) /* ch,ch+,jp */ + +/* HW Corrected system bus data ECC error for read of memory or I/O */ +#define CHAFSR_CE (1UL << 33UL) /* ch,ch+,jp */ + +/* Uncorrectable ECC error from remote cache/memory */ +#define JPAFSR_RUE (1UL << 32UL) /* jp */ + +/* Correctable ECC error from remote cache/memory */ +#define JPAFSR_RCE (1UL << 31UL) /* jp */ + +/* JBUS parity error on returned read data */ +#define JPAFSR_BP (1UL << 30UL) /* jp */ + +/* JBUS parity error on data for writeback or block store */ +#define JPAFSR_WBP (1UL << 29UL) /* jp */ + +/* Foreign read to DRAM incurring correctable ECC error */ +#define JPAFSR_FRC (1UL << 28UL) /* jp */ + +/* Foreign read to DRAM incurring uncorrectable ECC error */ +#define JPAFSR_FRU (1UL << 27UL) /* jp */ + +#define CHAFSR_ERRORS (CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \ + CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \ + CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \ + CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \ + CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE) +#define CHPAFSR_ERRORS (CHPAFSR_DTO | CHPAFSR_DBERR | CHPAFSR_THCE | \ + CHPAFSR_TSCE | CHPAFSR_TUE | CHPAFSR_DUE | \ + CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \ + CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \ + CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \ + CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \ + CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE) +#define JPAFSR_ERRORS (JPAFSR_JETO | JPAFSR_SCE | JPAFSR_JEIC | \ + JPAFSR_JEIT | CHAFSR_PERR | CHAFSR_IERR | \ + CHAFSR_ISAP | JPAFSR_ETP | JPAFSR_OM | \ + JPAFSR_UMS | CHAFSR_IVU | CHAFSR_TO | \ + CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | \ + CHAFSR_CPC | CHAFSR_CPU | CHAFSR_WDC | \ + CHAFSR_WDU | CHAFSR_EDC | CHAFSR_EDU | \ + CHAFSR_UE | CHAFSR_CE | JPAFSR_RUE | \ + JPAFSR_RCE | JPAFSR_BP | JPAFSR_WBP | \ + JPAFSR_FRC | JPAFSR_FRU) + +/* Active JBUS request signal when error occurred */ +#define JPAFSR_JBREQ (0x7UL << 24UL) /* jp */ +#define JPAFSR_JBREQ_SHIFT 24UL + +/* L2 cache way information */ +#define JPAFSR_ETW (0x3UL << 22UL) /* jp */ +#define JPAFSR_ETW_SHIFT 22UL + +/* System bus MTAG ECC syndrome. This field captures the status of the + * first occurrence of the highest-priority error according to the M_SYND + * overwrite policy. After the AFSR sticky bit, corresponding to the error + * for which the M_SYND is reported, is cleared, the contents of the M_SYND + * field will be unchanged by will be unfrozen for further error capture. + */ +#define CHAFSR_M_SYNDROME (0xfUL << 16UL) /* ch,ch+,jp */ +#define CHAFSR_M_SYNDROME_SHIFT 16UL + +/* Agenid Id of the foreign device causing the UE/CE errors */ +#define JPAFSR_AID (0x1fUL << 9UL) /* jp */ +#define JPAFSR_AID_SHIFT 9UL + +/* System bus or E-cache data ECC syndrome. This field captures the status + * of the first occurrence of the highest-priority error according to the + * E_SYND overwrite policy. After the AFSR sticky bit, corresponding to the + * error for which the E_SYND is reported, is cleare, the contents of the E_SYND + * field will be unchanged but will be unfrozen for further error capture. + */ +#define CHAFSR_E_SYNDROME (0x1ffUL << 0UL) /* ch,ch+,jp */ +#define CHAFSR_E_SYNDROME_SHIFT 0UL + +/* The AFSR must be explicitly cleared by software, it is not cleared automatically + * by a read. Writes to bits <51:33> with bits set will clear the corresponding + * bits in the AFSR. Bits associated with disrupting traps must be cleared before + * interrupts are re-enabled to prevent multiple traps for the same error. I.e. + * PSTATE.IE and AFSR bits control delivery of disrupting traps. + * + * Since there is only one AFAR, when multiple events have been logged by the + * bits in the AFSR, at most one of these events will have its status captured + * in the AFAR. The highest priority of those event bits will get AFAR logging. + * The AFAR will be unlocked and available to capture the address of another event + * as soon as the one bit in AFSR that corresponds to the event logged in AFAR is + * cleared. For example, if AFSR.CE is detected, then AFSR.UE (which overwrites + * the AFAR), and AFSR.UE is cleared by not AFSR.CE, then the AFAR will be unlocked + * and ready for another event, even though AFSR.CE is still set. The same rules + * also apply to the M_SYNDROME and E_SYNDROME fields of the AFSR. + */ + +#endif /* _SPARC64_CHAFSR_H */ diff --git a/arch/sparc/include/asm/checksum.h b/arch/sparc/include/asm/checksum.h new file mode 100644 index 00000000000..7ac0d7497bc --- /dev/null +++ b/arch/sparc/include/asm/checksum.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_CHECKSUM_H +#define ___ASM_SPARC_CHECKSUM_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/checksum_64.h> +#else +#include <asm/checksum_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/checksum_32.h b/arch/sparc/include/asm/checksum_32.h new file mode 100644 index 00000000000..bdbda1453aa --- /dev/null +++ b/arch/sparc/include/asm/checksum_32.h @@ -0,0 +1,241 @@ +#ifndef __SPARC_CHECKSUM_H +#define __SPARC_CHECKSUM_H + +/* checksum.h: IP/UDP/TCP checksum routines on the Sparc. + * + * Copyright(C) 1995 Linus Torvalds + * Copyright(C) 1995 Miguel de Icaza + * Copyright(C) 1996 David S. Miller + * Copyright(C) 1996 Eddie C. Dost + * Copyright(C) 1997 Jakub Jelinek + * + * derived from: + * Alpha checksum c-code + * ix86 inline assembly + * RFC1071 Computing the Internet Checksum + */ + +#include <linux/in6.h> +#include <asm/uaccess.h> + +/* computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +extern __wsum csum_partial(const void *buff, int len, __wsum sum); + +/* the same as csum_partial, but copies from fs:src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +extern unsigned int __csum_partial_copy_sparc_generic (const unsigned char *, unsigned char *); + +static inline __wsum +csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum) +{ + register unsigned int ret asm("o0") = (unsigned int)src; + register char *d asm("o1") = dst; + register int l asm("g1") = len; + + __asm__ __volatile__ ( + "call __csum_partial_copy_sparc_generic\n\t" + " mov %6, %%g7\n" + : "=&r" (ret), "=&r" (d), "=&r" (l) + : "0" (ret), "1" (d), "2" (l), "r" (sum) + : "o2", "o3", "o4", "o5", "o7", + "g2", "g3", "g4", "g5", "g7", + "memory", "cc"); + return (__force __wsum)ret; +} + +static inline __wsum +csum_partial_copy_from_user(const void __user *src, void *dst, int len, + __wsum sum, int *err) + { + register unsigned long ret asm("o0") = (unsigned long)src; + register char *d asm("o1") = dst; + register int l asm("g1") = len; + register __wsum s asm("g7") = sum; + + __asm__ __volatile__ ( + ".section __ex_table,#alloc\n\t" + ".align 4\n\t" + ".word 1f,2\n\t" + ".previous\n" + "1:\n\t" + "call __csum_partial_copy_sparc_generic\n\t" + " st %8, [%%sp + 64]\n" + : "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s) + : "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err) + : "o2", "o3", "o4", "o5", "o7", "g2", "g3", "g4", "g5", + "cc", "memory"); + return (__force __wsum)ret; +} + +static inline __wsum +csum_partial_copy_to_user(const void *src, void __user *dst, int len, + __wsum sum, int *err) +{ + if (!access_ok (VERIFY_WRITE, dst, len)) { + *err = -EFAULT; + return sum; + } else { + register unsigned long ret asm("o0") = (unsigned long)src; + register char __user *d asm("o1") = dst; + register int l asm("g1") = len; + register __wsum s asm("g7") = sum; + + __asm__ __volatile__ ( + ".section __ex_table,#alloc\n\t" + ".align 4\n\t" + ".word 1f,1\n\t" + ".previous\n" + "1:\n\t" + "call __csum_partial_copy_sparc_generic\n\t" + " st %8, [%%sp + 64]\n" + : "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s) + : "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err) + : "o2", "o3", "o4", "o5", "o7", + "g2", "g3", "g4", "g5", + "cc", "memory"); + return (__force __wsum)ret; + } +} + +#define HAVE_CSUM_COPY_USER +#define csum_and_copy_to_user csum_partial_copy_to_user + +/* ihl is always 5 or greater, almost always is 5, and iph is word aligned + * the majority of the time. + */ +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + __sum16 sum; + + /* Note: We must read %2 before we touch %0 for the first time, + * because GCC can legitimately use the same register for + * both operands. + */ + __asm__ __volatile__("sub\t%2, 4, %%g4\n\t" + "ld\t[%1 + 0x00], %0\n\t" + "ld\t[%1 + 0x04], %%g2\n\t" + "ld\t[%1 + 0x08], %%g3\n\t" + "addcc\t%%g2, %0, %0\n\t" + "addxcc\t%%g3, %0, %0\n\t" + "ld\t[%1 + 0x0c], %%g2\n\t" + "ld\t[%1 + 0x10], %%g3\n\t" + "addxcc\t%%g2, %0, %0\n\t" + "addx\t%0, %%g0, %0\n" + "1:\taddcc\t%%g3, %0, %0\n\t" + "add\t%1, 4, %1\n\t" + "addxcc\t%0, %%g0, %0\n\t" + "subcc\t%%g4, 1, %%g4\n\t" + "be,a\t2f\n\t" + "sll\t%0, 16, %%g2\n\t" + "b\t1b\n\t" + "ld\t[%1 + 0x10], %%g3\n" + "2:\taddcc\t%0, %%g2, %%g2\n\t" + "srl\t%%g2, 16, %0\n\t" + "addx\t%0, %%g0, %0\n\t" + "xnor\t%%g0, %0, %0" + : "=r" (sum), "=&r" (iph) + : "r" (ihl), "1" (iph) + : "g2", "g3", "g4", "cc", "memory"); + return sum; +} + +/* Fold a partial checksum without adding pseudo headers. */ +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int tmp; + + __asm__ __volatile__("addcc\t%0, %1, %1\n\t" + "srl\t%1, 16, %1\n\t" + "addx\t%1, %%g0, %1\n\t" + "xnor\t%%g0, %1, %0" + : "=&r" (sum), "=r" (tmp) + : "0" (sum), "1" ((__force u32)sum<<16) + : "cc"); + return (__force __sum16)sum; +} + +static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + __asm__ __volatile__("addcc\t%1, %0, %0\n\t" + "addxcc\t%2, %0, %0\n\t" + "addxcc\t%3, %0, %0\n\t" + "addx\t%0, %%g0, %0\n\t" + : "=r" (sum), "=r" (saddr) + : "r" (daddr), "r" (proto + len), "0" (sum), + "1" (saddr) + : "cc"); + return sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +#define _HAVE_ARCH_IPV6_CSUM + +static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, + __u32 len, unsigned short proto, + __wsum sum) +{ + __asm__ __volatile__ ( + "addcc %3, %4, %%g4\n\t" + "addxcc %5, %%g4, %%g4\n\t" + "ld [%2 + 0x0c], %%g2\n\t" + "ld [%2 + 0x08], %%g3\n\t" + "addxcc %%g2, %%g4, %%g4\n\t" + "ld [%2 + 0x04], %%g2\n\t" + "addxcc %%g3, %%g4, %%g4\n\t" + "ld [%2 + 0x00], %%g3\n\t" + "addxcc %%g2, %%g4, %%g4\n\t" + "ld [%1 + 0x0c], %%g2\n\t" + "addxcc %%g3, %%g4, %%g4\n\t" + "ld [%1 + 0x08], %%g3\n\t" + "addxcc %%g2, %%g4, %%g4\n\t" + "ld [%1 + 0x04], %%g2\n\t" + "addxcc %%g3, %%g4, %%g4\n\t" + "ld [%1 + 0x00], %%g3\n\t" + "addxcc %%g2, %%g4, %%g4\n\t" + "addxcc %%g3, %%g4, %0\n\t" + "addx 0, %0, %0\n" + : "=&r" (sum) + : "r" (saddr), "r" (daddr), + "r"(htonl(len)), "r"(htonl(proto)), "r"(sum) + : "g2", "g3", "g4", "cc"); + + return csum_fold(sum); +} + +/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */ +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#endif /* !(__SPARC_CHECKSUM_H) */ diff --git a/arch/sparc/include/asm/checksum_64.h b/arch/sparc/include/asm/checksum_64.h new file mode 100644 index 00000000000..019b9615e43 --- /dev/null +++ b/arch/sparc/include/asm/checksum_64.h @@ -0,0 +1,167 @@ +#ifndef __SPARC64_CHECKSUM_H +#define __SPARC64_CHECKSUM_H + +/* checksum.h: IP/UDP/TCP checksum routines on the V9. + * + * Copyright(C) 1995 Linus Torvalds + * Copyright(C) 1995 Miguel de Icaza + * Copyright(C) 1996 David S. Miller + * Copyright(C) 1996 Eddie C. Dost + * Copyright(C) 1997 Jakub Jelinek + * + * derived from: + * Alpha checksum c-code + * ix86 inline assembly + * RFC1071 Computing the Internet Checksum + */ + +#include <linux/in6.h> +#include <asm/uaccess.h> + +/* computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +extern __wsum csum_partial(const void * buff, int len, __wsum sum); + +/* the same as csum_partial, but copies from user space while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ +extern __wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum); + +extern long __csum_partial_copy_from_user(const void __user *src, + void *dst, int len, + __wsum sum); + +static inline __wsum +csum_partial_copy_from_user(const void __user *src, + void *dst, int len, + __wsum sum, int *err) +{ + long ret = __csum_partial_copy_from_user(src, dst, len, sum); + if (ret < 0) + *err = -EFAULT; + return (__force __wsum) ret; +} + +/* + * Copy and checksum to user + */ +#define HAVE_CSUM_COPY_USER +extern long __csum_partial_copy_to_user(const void *src, + void __user *dst, int len, + __wsum sum); + +static inline __wsum +csum_and_copy_to_user(const void *src, + void __user *dst, int len, + __wsum sum, int *err) +{ + long ret = __csum_partial_copy_to_user(src, dst, len, sum); + if (ret < 0) + *err = -EFAULT; + return (__force __wsum) ret; +} + +/* ihl is always 5 or greater, almost always is 5, and iph is word aligned + * the majority of the time. + */ +extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); + +/* Fold a partial checksum without adding pseudo headers. */ +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int tmp; + + __asm__ __volatile__( +" addcc %0, %1, %1\n" +" srl %1, 16, %1\n" +" addc %1, %%g0, %1\n" +" xnor %%g0, %1, %0\n" + : "=&r" (sum), "=r" (tmp) + : "0" (sum), "1" ((__force u32)sum<<16) + : "cc"); + return (__force __sum16)sum; +} + +static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned int len, + unsigned short proto, + __wsum sum) +{ + __asm__ __volatile__( +" addcc %1, %0, %0\n" +" addccc %2, %0, %0\n" +" addccc %3, %0, %0\n" +" addc %0, %%g0, %0\n" + : "=r" (sum), "=r" (saddr) + : "r" (daddr), "r" (proto + len), "0" (sum), "1" (saddr) + : "cc"); + return sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +#define _HAVE_ARCH_IPV6_CSUM + +static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, + __u32 len, unsigned short proto, + __wsum sum) +{ + __asm__ __volatile__ ( +" addcc %3, %4, %%g7\n" +" addccc %5, %%g7, %%g7\n" +" lduw [%2 + 0x0c], %%g2\n" +" lduw [%2 + 0x08], %%g3\n" +" addccc %%g2, %%g7, %%g7\n" +" lduw [%2 + 0x04], %%g2\n" +" addccc %%g3, %%g7, %%g7\n" +" lduw [%2 + 0x00], %%g3\n" +" addccc %%g2, %%g7, %%g7\n" +" lduw [%1 + 0x0c], %%g2\n" +" addccc %%g3, %%g7, %%g7\n" +" lduw [%1 + 0x08], %%g3\n" +" addccc %%g2, %%g7, %%g7\n" +" lduw [%1 + 0x04], %%g2\n" +" addccc %%g3, %%g7, %%g7\n" +" lduw [%1 + 0x00], %%g3\n" +" addccc %%g2, %%g7, %%g7\n" +" addccc %%g3, %%g7, %0\n" +" addc 0, %0, %0\n" + : "=&r" (sum) + : "r" (saddr), "r" (daddr), "r"(htonl(len)), + "r"(htonl(proto)), "r"(sum) + : "g2", "g3", "g7", "cc"); + + return csum_fold(sum); +} + +/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */ +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#endif /* !(__SPARC64_CHECKSUM_H) */ diff --git a/arch/sparc/include/asm/chmctrl.h b/arch/sparc/include/asm/chmctrl.h new file mode 100644 index 00000000000..859b4a4b0d3 --- /dev/null +++ b/arch/sparc/include/asm/chmctrl.h @@ -0,0 +1,183 @@ +#ifndef _SPARC64_CHMCTRL_H +#define _SPARC64_CHMCTRL_H + +/* Cheetah memory controller programmable registers. */ +#define CHMCTRL_TCTRL1 0x00 /* Memory Timing Control I */ +#define CHMCTRL_TCTRL2 0x08 /* Memory Timing Control II */ +#define CHMCTRL_TCTRL3 0x38 /* Memory Timing Control III */ +#define CHMCTRL_TCTRL4 0x40 /* Memory Timing Control IV */ +#define CHMCTRL_DECODE1 0x10 /* Memory Address Decode I */ +#define CHMCTRL_DECODE2 0x18 /* Memory Address Decode II */ +#define CHMCTRL_DECODE3 0x20 /* Memory Address Decode III */ +#define CHMCTRL_DECODE4 0x28 /* Memory Address Decode IV */ +#define CHMCTRL_MACTRL 0x30 /* Memory Address Control */ + +/* Memory Timing Control I */ +#define TCTRL1_SDRAMCTL_DLY 0xf000000000000000UL +#define TCTRL1_SDRAMCTL_DLY_SHIFT 60 +#define TCTRL1_SDRAMCLK_DLY 0x0e00000000000000UL +#define TCTRL1_SDRAMCLK_DLY_SHIFT 57 +#define TCTRL1_R 0x0100000000000000UL +#define TCTRL1_R_SHIFT 56 +#define TCTRL1_AUTORFR_CYCLE 0x00fe000000000000UL +#define TCTRL1_AUTORFR_CYCLE_SHIFT 49 +#define TCTRL1_RD_WAIT 0x0001f00000000000UL +#define TCTRL1_RD_WAIT_SHIFT 44 +#define TCTRL1_PC_CYCLE 0x00000fc000000000UL +#define TCTRL1_PC_CYCLE_SHIFT 38 +#define TCTRL1_WR_MORE_RAS_PW 0x0000003f00000000UL +#define TCTRL1_WR_MORE_RAS_PW_SHIFT 32 +#define TCTRL1_RD_MORE_RAW_PW 0x00000000fc000000UL +#define TCTRL1_RD_MORE_RAS_PW_SHIFT 26 +#define TCTRL1_ACT_WR_DLY 0x0000000003f00000UL +#define TCTRL1_ACT_WR_DLY_SHIFT 20 +#define TCTRL1_ACT_RD_DLY 0x00000000000fc000UL +#define TCTRL1_ACT_RD_DLY_SHIFT 14 +#define TCTRL1_BANK_PRESENT 0x0000000000003000UL +#define TCTRL1_BANK_PRESENT_SHIFT 12 +#define TCTRL1_RFR_INT 0x0000000000000ff8UL +#define TCTRL1_RFR_INT_SHIFT 3 +#define TCTRL1_SET_MODE_REG 0x0000000000000004UL +#define TCTRL1_SET_MODE_REG_SHIFT 2 +#define TCTRL1_RFR_ENABLE 0x0000000000000002UL +#define TCTRL1_RFR_ENABLE_SHIFT 1 +#define TCTRL1_PRECHG_ALL 0x0000000000000001UL +#define TCTRL1_PRECHG_ALL_SHIFT 0 + +/* Memory Timing Control II */ +#define TCTRL2_WR_MSEL_DLY 0xfc00000000000000UL +#define TCTRL2_WR_MSEL_DLY_SHIFT 58 +#define TCTRL2_RD_MSEL_DLY 0x03f0000000000000UL +#define TCTRL2_RD_MSEL_DLY_SHIFT 52 +#define TCTRL2_WRDATA_THLD 0x000c000000000000UL +#define TCTRL2_WRDATA_THLD_SHIFT 50 +#define TCTRL2_RDWR_RD_TI_DLY 0x0003f00000000000UL +#define TCTRL2_RDWR_RD_TI_DLY_SHIFT 44 +#define TCTRL2_AUTOPRECHG_ENBL 0x0000080000000000UL +#define TCTRL2_AUTOPRECHG_ENBL_SHIFT 43 +#define TCTRL2_RDWR_PI_MORE_DLY 0x000007c000000000UL +#define TCTRL2_RDWR_PI_MORE_DLY_SHIFT 38 +#define TCTRL2_RDWR_1_DLY 0x0000003f00000000UL +#define TCTRL2_RDWR_1_DLY_SHIFT 32 +#define TCTRL2_WRWR_PI_MORE_DLY 0x00000000f8000000UL +#define TCTRL2_WRWR_PI_MORE_DLY_SHIFT 27 +#define TCTRL2_WRWR_1_DLY 0x0000000007e00000UL +#define TCTRL2_WRWR_1_DLY_SHIFT 21 +#define TCTRL2_RDWR_RD_PI_MORE_DLY 0x00000000001f0000UL +#define TCTRL2_RDWR_RD_PI_MORE_DLY_SHIFT 16 +#define TCTRL2_R 0x0000000000008000UL +#define TCTRL2_R_SHIFT 15 +#define TCTRL2_SDRAM_MODE_REG_DATA 0x0000000000007fffUL +#define TCTRL2_SDRAM_MODE_REG_DATA_SHIFT 0 + +/* Memory Timing Control III */ +#define TCTRL3_SDRAM_CTL_DLY 0xf000000000000000UL +#define TCTRL3_SDRAM_CTL_DLY_SHIFT 60 +#define TCTRL3_SDRAM_CLK_DLY 0x0e00000000000000UL +#define TCTRL3_SDRAM_CLK_DLY_SHIFT 57 +#define TCTRL3_R 0x0100000000000000UL +#define TCTRL3_R_SHIFT 56 +#define TCTRL3_AUTO_RFR_CYCLE 0x00fe000000000000UL +#define TCTRL3_AUTO_RFR_CYCLE_SHIFT 49 +#define TCTRL3_RD_WAIT 0x0001f00000000000UL +#define TCTRL3_RD_WAIT_SHIFT 44 +#define TCTRL3_PC_CYCLE 0x00000fc000000000UL +#define TCTRL3_PC_CYCLE_SHIFT 38 +#define TCTRL3_WR_MORE_RAW_PW 0x0000003f00000000UL +#define TCTRL3_WR_MORE_RAW_PW_SHIFT 32 +#define TCTRL3_RD_MORE_RAW_PW 0x00000000fc000000UL +#define TCTRL3_RD_MORE_RAW_PW_SHIFT 26 +#define TCTRL3_ACT_WR_DLY 0x0000000003f00000UL +#define TCTRL3_ACT_WR_DLY_SHIFT 20 +#define TCTRL3_ACT_RD_DLY 0x00000000000fc000UL +#define TCTRL3_ACT_RD_DLY_SHIFT 14 +#define TCTRL3_BANK_PRESENT 0x0000000000003000UL +#define TCTRL3_BANK_PRESENT_SHIFT 12 +#define TCTRL3_RFR_INT 0x0000000000000ff8UL +#define TCTRL3_RFR_INT_SHIFT 3 +#define TCTRL3_SET_MODE_REG 0x0000000000000004UL +#define TCTRL3_SET_MODE_REG_SHIFT 2 +#define TCTRL3_RFR_ENABLE 0x0000000000000002UL +#define TCTRL3_RFR_ENABLE_SHIFT 1 +#define TCTRL3_PRECHG_ALL 0x0000000000000001UL +#define TCTRL3_PRECHG_ALL_SHIFT 0 + +/* Memory Timing Control IV */ +#define TCTRL4_WR_MSEL_DLY 0xfc00000000000000UL +#define TCTRL4_WR_MSEL_DLY_SHIFT 58 +#define TCTRL4_RD_MSEL_DLY 0x03f0000000000000UL +#define TCTRL4_RD_MSEL_DLY_SHIFT 52 +#define TCTRL4_WRDATA_THLD 0x000c000000000000UL +#define TCTRL4_WRDATA_THLD_SHIFT 50 +#define TCTRL4_RDWR_RD_RI_DLY 0x0003f00000000000UL +#define TCTRL4_RDWR_RD_RI_DLY_SHIFT 44 +#define TCTRL4_AUTO_PRECHG_ENBL 0x0000080000000000UL +#define TCTRL4_AUTO_PRECHG_ENBL_SHIFT 43 +#define TCTRL4_RD_WR_PI_MORE_DLY 0x000007c000000000UL +#define TCTRL4_RD_WR_PI_MORE_DLY_SHIFT 38 +#define TCTRL4_RD_WR_TI_DLY 0x0000003f00000000UL +#define TCTRL4_RD_WR_TI_DLY_SHIFT 32 +#define TCTRL4_WR_WR_PI_MORE_DLY 0x00000000f8000000UL +#define TCTRL4_WR_WR_PI_MORE_DLY_SHIFT 27 +#define TCTRL4_WR_WR_TI_DLY 0x0000000007e00000UL +#define TCTRL4_WR_WR_TI_DLY_SHIFT 21 +#define TCTRL4_RDWR_RD_PI_MORE_DLY 0x00000000001f000UL0 +#define TCTRL4_RDWR_RD_PI_MORE_DLY_SHIFT 16 +#define TCTRL4_R 0x0000000000008000UL +#define TCTRL4_R_SHIFT 15 +#define TCTRL4_SDRAM_MODE_REG_DATA 0x0000000000007fffUL +#define TCTRL4_SDRAM_MODE_REG_DATA_SHIFT 0 + +/* All 4 memory address decoding registers have the + * same layout. + */ +#define MEM_DECODE_VALID 0x8000000000000000UL /* Valid */ +#define MEM_DECODE_VALID_SHIFT 63 +#define MEM_DECODE_UK 0x001ffe0000000000UL /* Upper mask */ +#define MEM_DECODE_UK_SHIFT 41 +#define MEM_DECODE_UM 0x0000001ffff00000UL /* Upper match */ +#define MEM_DECODE_UM_SHIFT 20 +#define MEM_DECODE_LK 0x000000000003c000UL /* Lower mask */ +#define MEM_DECODE_LK_SHIFT 14 +#define MEM_DECODE_LM 0x0000000000000f00UL /* Lower match */ +#define MEM_DECODE_LM_SHIFT 8 + +#define PA_UPPER_BITS 0x000007fffc000000UL +#define PA_UPPER_BITS_SHIFT 26 +#define PA_LOWER_BITS 0x00000000000003c0UL +#define PA_LOWER_BITS_SHIFT 6 + +#define MACTRL_R0 0x8000000000000000UL +#define MACTRL_R0_SHIFT 63 +#define MACTRL_ADDR_LE_PW 0x7000000000000000UL +#define MACTRL_ADDR_LE_PW_SHIFT 60 +#define MACTRL_CMD_PW 0x0f00000000000000UL +#define MACTRL_CMD_PW_SHIFT 56 +#define MACTRL_HALF_MODE_WR_MSEL_DLY 0x00fc000000000000UL +#define MACTRL_HALF_MODE_WR_MSEL_DLY_SHIFT 50 +#define MACTRL_HALF_MODE_RD_MSEL_DLY 0x0003f00000000000UL +#define MACTRL_HALF_MODE_RD_MSEL_DLY_SHIFT 44 +#define MACTRL_HALF_MODE_SDRAM_CTL_DLY 0x00000f0000000000UL +#define MACTRL_HALF_MODE_SDRAM_CTL_DLY_SHIFT 40 +#define MACTRL_HALF_MODE_SDRAM_CLK_DLY 0x000000e000000000UL +#define MACTRL_HALF_MODE_SDRAM_CLK_DLY_SHIFT 37 +#define MACTRL_R1 0x0000001000000000UL +#define MACTRL_R1_SHIFT 36 +#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3 0x0000000f00000000UL +#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3_SHIFT 32 +#define MACTRL_ENC_INTLV_B3 0x00000000f8000000UL +#define MACTRL_ENC_INTLV_B3_SHIFT 27 +#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2 0x0000000007800000UL +#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2_SHIFT 23 +#define MACTRL_ENC_INTLV_B2 0x00000000007c0000UL +#define MACTRL_ENC_INTLV_B2_SHIFT 18 +#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1 0x000000000003c000UL +#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1_SHIFT 14 +#define MACTRL_ENC_INTLV_B1 0x0000000000003e00UL +#define MACTRL_ENC_INTLV_B1_SHIFT 9 +#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0 0x00000000000001e0UL +#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0_SHIFT 5 +#define MACTRL_ENC_INTLV_B0 0x000000000000001fUL +#define MACTRL_ENC_INTLV_B0_SHIFT 0 + +#endif /* _SPARC64_CHMCTRL_H */ diff --git a/arch/sparc/include/asm/clock.h b/arch/sparc/include/asm/clock.h new file mode 100644 index 00000000000..2cf99dadec5 --- /dev/null +++ b/arch/sparc/include/asm/clock.h @@ -0,0 +1,11 @@ +/* + * clock.h: Definitions for clock operations on the Sparc. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ +#ifndef _SPARC_CLOCK_H +#define _SPARC_CLOCK_H + +/* Foo for now. */ + +#endif /* !(_SPARC_CLOCK_H) */ diff --git a/arch/sparc/include/asm/cmt.h b/arch/sparc/include/asm/cmt.h new file mode 100644 index 00000000000..870db592857 --- /dev/null +++ b/arch/sparc/include/asm/cmt.h @@ -0,0 +1,59 @@ +#ifndef _SPARC64_CMT_H +#define _SPARC64_CMT_H + +/* cmt.h: Chip Multi-Threading register definitions + * + * Copyright (C) 2004 David S. Miller (davem@redhat.com) + */ + +/* ASI_CORE_ID - private */ +#define LP_ID 0x0000000000000010UL +#define LP_ID_MAX 0x00000000003f0000UL +#define LP_ID_ID 0x000000000000003fUL + +/* ASI_INTR_ID - private */ +#define LP_INTR_ID 0x0000000000000000UL +#define LP_INTR_ID_ID 0x00000000000003ffUL + +/* ASI_CESR_ID - private */ +#define CESR_ID 0x0000000000000040UL +#define CESR_ID_ID 0x00000000000000ffUL + +/* ASI_CORE_AVAILABLE - shared */ +#define LP_AVAIL 0x0000000000000000UL +#define LP_AVAIL_1 0x0000000000000002UL +#define LP_AVAIL_0 0x0000000000000001UL + +/* ASI_CORE_ENABLE_STATUS - shared */ +#define LP_ENAB_STAT 0x0000000000000010UL +#define LP_ENAB_STAT_1 0x0000000000000002UL +#define LP_ENAB_STAT_0 0x0000000000000001UL + +/* ASI_CORE_ENABLE - shared */ +#define LP_ENAB 0x0000000000000020UL +#define LP_ENAB_1 0x0000000000000002UL +#define LP_ENAB_0 0x0000000000000001UL + +/* ASI_CORE_RUNNING - shared */ +#define LP_RUNNING_RW 0x0000000000000050UL +#define LP_RUNNING_W1S 0x0000000000000060UL +#define LP_RUNNING_W1C 0x0000000000000068UL +#define LP_RUNNING_1 0x0000000000000002UL +#define LP_RUNNING_0 0x0000000000000001UL + +/* ASI_CORE_RUNNING_STAT - shared */ +#define LP_RUN_STAT 0x0000000000000058UL +#define LP_RUN_STAT_1 0x0000000000000002UL +#define LP_RUN_STAT_0 0x0000000000000001UL + +/* ASI_XIR_STEERING - shared */ +#define LP_XIR_STEER 0x0000000000000030UL +#define LP_XIR_STEER_1 0x0000000000000002UL +#define LP_XIR_STEER_0 0x0000000000000001UL + +/* ASI_CMT_ERROR_STEERING - shared */ +#define CMT_ER_STEER 0x0000000000000040UL +#define CMT_ER_STEER_1 0x0000000000000002UL +#define CMT_ER_STEER_0 0x0000000000000001UL + +#endif /* _SPARC64_CMT_H */ diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h new file mode 100644 index 00000000000..f260b58f5ce --- /dev/null +++ b/arch/sparc/include/asm/compat.h @@ -0,0 +1,243 @@ +#ifndef _ASM_SPARC64_COMPAT_H +#define _ASM_SPARC64_COMPAT_H +/* + * Architecture specific compatibility types + */ +#include <linux/types.h> + +#define COMPAT_USER_HZ 100 + +typedef u32 compat_size_t; +typedef s32 compat_ssize_t; +typedef s32 compat_time_t; +typedef s32 compat_clock_t; +typedef s32 compat_pid_t; +typedef u16 __compat_uid_t; +typedef u16 __compat_gid_t; +typedef u32 __compat_uid32_t; +typedef u32 __compat_gid32_t; +typedef u16 compat_mode_t; +typedef u32 compat_ino_t; +typedef u16 compat_dev_t; +typedef s32 compat_off_t; +typedef s64 compat_loff_t; +typedef s16 compat_nlink_t; +typedef u16 compat_ipc_pid_t; +typedef s32 compat_daddr_t; +typedef u32 compat_caddr_t; +typedef __kernel_fsid_t compat_fsid_t; +typedef s32 compat_key_t; +typedef s32 compat_timer_t; + +typedef s32 compat_int_t; +typedef s32 compat_long_t; +typedef s64 compat_s64; +typedef u32 compat_uint_t; +typedef u32 compat_ulong_t; +typedef u64 compat_u64; + +struct compat_timespec { + compat_time_t tv_sec; + s32 tv_nsec; +}; + +struct compat_timeval { + compat_time_t tv_sec; + s32 tv_usec; +}; + +struct compat_stat { + compat_dev_t st_dev; + compat_ino_t st_ino; + compat_mode_t st_mode; + compat_nlink_t st_nlink; + __compat_uid_t st_uid; + __compat_gid_t st_gid; + compat_dev_t st_rdev; + compat_off_t st_size; + compat_time_t st_atime; + compat_ulong_t st_atime_nsec; + compat_time_t st_mtime; + compat_ulong_t st_mtime_nsec; + compat_time_t st_ctime; + compat_ulong_t st_ctime_nsec; + compat_off_t st_blksize; + compat_off_t st_blocks; + u32 __unused4[2]; +}; + +struct compat_stat64 { + unsigned long long st_dev; + + unsigned long long st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned int st_uid; + unsigned int st_gid; + + unsigned long long st_rdev; + + unsigned char __pad3[8]; + + long long st_size; + unsigned int st_blksize; + + unsigned char __pad4[8]; + unsigned int st_blocks; + + unsigned int st_atime; + unsigned int st_atime_nsec; + + unsigned int st_mtime; + unsigned int st_mtime_nsec; + + unsigned int st_ctime; + unsigned int st_ctime_nsec; + + unsigned int __unused4; + unsigned int __unused5; +}; + +struct compat_flock { + short l_type; + short l_whence; + compat_off_t l_start; + compat_off_t l_len; + compat_pid_t l_pid; + short __unused; +}; + +#define F_GETLK64 12 +#define F_SETLK64 13 +#define F_SETLKW64 14 + +struct compat_flock64 { + short l_type; + short l_whence; + compat_loff_t l_start; + compat_loff_t l_len; + compat_pid_t l_pid; + short __unused; +}; + +struct compat_statfs { + int f_type; + int f_bsize; + int f_blocks; + int f_bfree; + int f_bavail; + int f_files; + int f_ffree; + compat_fsid_t f_fsid; + int f_namelen; /* SunOS ignores this field. */ + int f_frsize; + int f_spare[5]; +}; + +#define COMPAT_RLIM_INFINITY 0x7fffffff + +typedef u32 compat_old_sigset_t; + +#define _COMPAT_NSIG 64 +#define _COMPAT_NSIG_BPW 32 + +typedef u32 compat_sigset_word; + +#define COMPAT_OFF_T_MAX 0x7fffffff +#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL + +/* + * A pointer passed in from user mode. This should not + * be used for syscall parameters, just declare them + * as pointers because the syscall entry code will have + * appropriately converted them already. + */ +typedef u32 compat_uptr_t; + +static inline void __user *compat_ptr(compat_uptr_t uptr) +{ + return (void __user *)(unsigned long)uptr; +} + +static inline compat_uptr_t ptr_to_compat(void __user *uptr) +{ + return (u32)(unsigned long)uptr; +} + +static inline void __user *compat_alloc_user_space(long len) +{ + struct pt_regs *regs = current_thread_info()->kregs; + unsigned long usp = regs->u_regs[UREG_I6]; + + if (!(test_thread_flag(TIF_32BIT))) + usp += STACK_BIAS; + else + usp &= 0xffffffffUL; + + usp -= len; + usp &= ~0x7UL; + + return (void __user *) usp; +} + +struct compat_ipc64_perm { + compat_key_t key; + __compat_uid32_t uid; + __compat_gid32_t gid; + __compat_uid32_t cuid; + __compat_gid32_t cgid; + unsigned short __pad1; + compat_mode_t mode; + unsigned short __pad2; + unsigned short seq; + unsigned long __unused1; /* yes they really are 64bit pads */ + unsigned long __unused2; +}; + +struct compat_semid64_ds { + struct compat_ipc64_perm sem_perm; + unsigned int __pad1; + compat_time_t sem_otime; + unsigned int __pad2; + compat_time_t sem_ctime; + u32 sem_nsems; + u32 __unused1; + u32 __unused2; +}; + +struct compat_msqid64_ds { + struct compat_ipc64_perm msg_perm; + unsigned int __pad1; + compat_time_t msg_stime; + unsigned int __pad2; + compat_time_t msg_rtime; + unsigned int __pad3; + compat_time_t msg_ctime; + unsigned int msg_cbytes; + unsigned int msg_qnum; + unsigned int msg_qbytes; + compat_pid_t msg_lspid; + compat_pid_t msg_lrpid; + unsigned int __unused1; + unsigned int __unused2; +}; + +struct compat_shmid64_ds { + struct compat_ipc64_perm shm_perm; + unsigned int __pad1; + compat_time_t shm_atime; + unsigned int __pad2; + compat_time_t shm_dtime; + unsigned int __pad3; + compat_time_t shm_ctime; + compat_size_t shm_segsz; + compat_pid_t shm_cpid; + compat_pid_t shm_lpid; + unsigned int shm_nattch; + unsigned int __unused1; + unsigned int __unused2; +}; + +#endif /* _ASM_SPARC64_COMPAT_H */ diff --git a/arch/sparc/include/asm/compat_signal.h b/arch/sparc/include/asm/compat_signal.h new file mode 100644 index 00000000000..b759eab9b51 --- /dev/null +++ b/arch/sparc/include/asm/compat_signal.h @@ -0,0 +1,29 @@ +#ifndef _COMPAT_SIGNAL_H +#define _COMPAT_SIGNAL_H + +#include <linux/compat.h> +#include <asm/signal.h> + +#ifdef CONFIG_COMPAT +struct __new_sigaction32 { + unsigned sa_handler; + unsigned int sa_flags; + unsigned sa_restorer; /* not used by Linux/SPARC yet */ + compat_sigset_t sa_mask; +}; + +struct __old_sigaction32 { + unsigned sa_handler; + compat_old_sigset_t sa_mask; + unsigned int sa_flags; + unsigned sa_restorer; /* not used by Linux/SPARC yet */ +}; + +typedef struct sigaltstack32 { + u32 ss_sp; + int ss_flags; + compat_size_t ss_size; +} stack_t32; +#endif + +#endif /* !(_COMPAT_SIGNAL_H) */ diff --git a/arch/sparc/include/asm/contregs.h b/arch/sparc/include/asm/contregs.h new file mode 100644 index 00000000000..48fa8a4ef35 --- /dev/null +++ b/arch/sparc/include/asm/contregs.h @@ -0,0 +1,53 @@ +#ifndef _SPARC_CONTREGS_H +#define _SPARC_CONTREGS_H + +/* contregs.h: Addresses of registers in the ASI_CONTROL alternate address + * space. These are for the mmu's context register, etc. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +/* 3=sun3 + 4=sun4 (as in sun4 sysmaint student book) + c=sun4c (according to davem) */ + +#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */ +#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */ +#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */ +#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */ +#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/ +#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */ +#define AC_BUS_ERROR 0x60000000 /* 34 Not cleared on read, byte. */ +#define AC_SYNC_ERR 0x60000000 /* c fault type */ +#define AC_SYNC_VA 0x60000004 /* c fault virtual address */ +#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */ +#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */ +#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */ +#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */ +#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */ +#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */ +#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */ +#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/ + +/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress */ +#define AC_M_PCR 0x0000 /* shv Processor Control Reg */ +#define AC_M_CTPR 0x0100 /* shv Context Table Pointer Reg */ +#define AC_M_CXR 0x0200 /* shv Context Register */ +#define AC_M_SFSR 0x0300 /* shv Synchronous Fault Status Reg */ +#define AC_M_SFAR 0x0400 /* shv Synchronous Fault Address Reg */ +#define AC_M_AFSR 0x0500 /* hv Asynchronous Fault Status Reg */ +#define AC_M_AFAR 0x0600 /* hv Asynchronous Fault Address Reg */ +#define AC_M_RESET 0x0700 /* hv Reset Reg */ +#define AC_M_RPR 0x1000 /* hv Root Pointer Reg */ +#define AC_M_TSUTRCR 0x1000 /* s TLB Replacement Ctrl Reg */ +#define AC_M_IAPTP 0x1100 /* hv Instruction Access PTP */ +#define AC_M_DAPTP 0x1200 /* hv Data Access PTP */ +#define AC_M_ITR 0x1300 /* hv Index Tag Register */ +#define AC_M_TRCR 0x1400 /* hv TLB Replacement Control Reg */ +#define AC_M_SFSRX 0x1300 /* s Synch Fault Status Reg prim */ +#define AC_M_SFARX 0x1400 /* s Synch Fault Address Reg prim */ +#define AC_M_RPR1 0x1500 /* h Root Pointer Reg (entry 2) */ +#define AC_M_IAPTP1 0x1600 /* h Instruction Access PTP (entry 2) */ +#define AC_M_DAPTP1 0x1700 /* h Data Access PTP (entry 2) */ + +#endif /* _SPARC_CONTREGS_H */ diff --git a/arch/sparc/include/asm/cpudata.h b/arch/sparc/include/asm/cpudata.h new file mode 100644 index 00000000000..b5976de7cac --- /dev/null +++ b/arch/sparc/include/asm/cpudata.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_CPUDATA_H +#define ___ASM_SPARC_CPUDATA_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/cpudata_64.h> +#else +#include <asm/cpudata_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/cpudata_32.h b/arch/sparc/include/asm/cpudata_32.h new file mode 100644 index 00000000000..31d48a0e32c --- /dev/null +++ b/arch/sparc/include/asm/cpudata_32.h @@ -0,0 +1,27 @@ +/* cpudata.h: Per-cpu parameters. + * + * Copyright (C) 2004 Keith M Wesolowski (wesolows@foobazco.org) + * + * Based on include/asm/cpudata.h and Linux 2.4 smp.h + * both (C) David S. Miller. + */ + +#ifndef _SPARC_CPUDATA_H +#define _SPARC_CPUDATA_H + +#include <linux/percpu.h> + +typedef struct { + unsigned long udelay_val; + unsigned long clock_tick; + unsigned int multiplier; + unsigned int counter; + int prom_node; + int mid; + int next; +} cpuinfo_sparc; + +DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data); +#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu)) + +#endif /* _SPARC_CPUDATA_H */ diff --git a/arch/sparc/include/asm/cpudata_64.h b/arch/sparc/include/asm/cpudata_64.h new file mode 100644 index 00000000000..532975ecfe1 --- /dev/null +++ b/arch/sparc/include/asm/cpudata_64.h @@ -0,0 +1,240 @@ +/* cpudata.h: Per-cpu parameters. + * + * Copyright (C) 2003, 2005, 2006 David S. Miller (davem@davemloft.net) + */ + +#ifndef _SPARC64_CPUDATA_H +#define _SPARC64_CPUDATA_H + +#include <asm/hypervisor.h> +#include <asm/asi.h> + +#ifndef __ASSEMBLY__ + +#include <linux/percpu.h> +#include <linux/threads.h> + +typedef struct { + /* Dcache line 1 */ + unsigned int __softirq_pending; /* must be 1st, see rtrap.S */ + unsigned int __pad0; + unsigned long clock_tick; /* %tick's per second */ + unsigned long __pad; + unsigned int __pad1; + unsigned int __pad2; + + /* Dcache line 2, rarely used */ + unsigned int dcache_size; + unsigned int dcache_line_size; + unsigned int icache_size; + unsigned int icache_line_size; + unsigned int ecache_size; + unsigned int ecache_line_size; + int core_id; + int proc_id; +} cpuinfo_sparc; + +DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data); +#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu)) +#define local_cpu_data() __get_cpu_var(__cpu_data) + +/* Trap handling code needs to get at a few critical values upon + * trap entry and to process TSB misses. These cannot be in the + * per_cpu() area as we really need to lock them into the TLB and + * thus make them part of the main kernel image. As a result we + * try to make this as small as possible. + * + * This is padded out and aligned to 64-bytes to avoid false sharing + * on SMP. + */ + +/* If you modify the size of this structure, please update + * TRAP_BLOCK_SZ_SHIFT below. + */ +struct thread_info; +struct trap_per_cpu { +/* D-cache line 1: Basic thread information, cpu and device mondo queues */ + struct thread_info *thread; + unsigned long pgd_paddr; + unsigned long cpu_mondo_pa; + unsigned long dev_mondo_pa; + +/* D-cache line 2: Error Mondo Queue and kernel buffer pointers */ + unsigned long resum_mondo_pa; + unsigned long resum_kernel_buf_pa; + unsigned long nonresum_mondo_pa; + unsigned long nonresum_kernel_buf_pa; + +/* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */ + struct hv_fault_status fault_info; + +/* Dcache line 7: Physical addresses of CPU send mondo block and CPU list. */ + unsigned long cpu_mondo_block_pa; + unsigned long cpu_list_pa; + unsigned long tsb_huge; + unsigned long tsb_huge_temp; + +/* Dcache line 8: IRQ work list, and keep trap_block a power-of-2 in size. */ + unsigned long irq_worklist_pa; + unsigned int cpu_mondo_qmask; + unsigned int dev_mondo_qmask; + unsigned int resum_qmask; + unsigned int nonresum_qmask; + void *hdesc; +} __attribute__((aligned(64))); +extern struct trap_per_cpu trap_block[NR_CPUS]; +extern void init_cur_cpu_trap(struct thread_info *); +extern void setup_tba(void); +extern int ncpus_probed; +extern void __init cpu_probe(void); +extern const struct seq_operations cpuinfo_op; + +extern unsigned long real_hard_smp_processor_id(void); + +struct cpuid_patch_entry { + unsigned int addr; + unsigned int cheetah_safari[4]; + unsigned int cheetah_jbus[4]; + unsigned int starfire[4]; + unsigned int sun4v[4]; +}; +extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end; + +struct sun4v_1insn_patch_entry { + unsigned int addr; + unsigned int insn; +}; +extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch, + __sun4v_1insn_patch_end; + +struct sun4v_2insn_patch_entry { + unsigned int addr; + unsigned int insns[2]; +}; +extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch, + __sun4v_2insn_patch_end; + +#endif /* !(__ASSEMBLY__) */ + +#define TRAP_PER_CPU_THREAD 0x00 +#define TRAP_PER_CPU_PGD_PADDR 0x08 +#define TRAP_PER_CPU_CPU_MONDO_PA 0x10 +#define TRAP_PER_CPU_DEV_MONDO_PA 0x18 +#define TRAP_PER_CPU_RESUM_MONDO_PA 0x20 +#define TRAP_PER_CPU_RESUM_KBUF_PA 0x28 +#define TRAP_PER_CPU_NONRESUM_MONDO_PA 0x30 +#define TRAP_PER_CPU_NONRESUM_KBUF_PA 0x38 +#define TRAP_PER_CPU_FAULT_INFO 0x40 +#define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA 0xc0 +#define TRAP_PER_CPU_CPU_LIST_PA 0xc8 +#define TRAP_PER_CPU_TSB_HUGE 0xd0 +#define TRAP_PER_CPU_TSB_HUGE_TEMP 0xd8 +#define TRAP_PER_CPU_IRQ_WORKLIST_PA 0xe0 +#define TRAP_PER_CPU_CPU_MONDO_QMASK 0xe8 +#define TRAP_PER_CPU_DEV_MONDO_QMASK 0xec +#define TRAP_PER_CPU_RESUM_QMASK 0xf0 +#define TRAP_PER_CPU_NONRESUM_QMASK 0xf4 + +#define TRAP_BLOCK_SZ_SHIFT 8 + +#include <asm/scratchpad.h> + +#define __GET_CPUID(REG) \ + /* Spitfire implementation (default). */ \ +661: ldxa [%g0] ASI_UPA_CONFIG, REG; \ + srlx REG, 17, REG; \ + and REG, 0x1f, REG; \ + nop; \ + .section .cpuid_patch, "ax"; \ + /* Instruction location. */ \ + .word 661b; \ + /* Cheetah Safari implementation. */ \ + ldxa [%g0] ASI_SAFARI_CONFIG, REG; \ + srlx REG, 17, REG; \ + and REG, 0x3ff, REG; \ + nop; \ + /* Cheetah JBUS implementation. */ \ + ldxa [%g0] ASI_JBUS_CONFIG, REG; \ + srlx REG, 17, REG; \ + and REG, 0x1f, REG; \ + nop; \ + /* Starfire implementation. */ \ + sethi %hi(0x1fff40000d0 >> 9), REG; \ + sllx REG, 9, REG; \ + or REG, 0xd0, REG; \ + lduwa [REG] ASI_PHYS_BYPASS_EC_E, REG;\ + /* sun4v implementation. */ \ + mov SCRATCHPAD_CPUID, REG; \ + ldxa [REG] ASI_SCRATCHPAD, REG; \ + nop; \ + nop; \ + .previous; + +#ifdef CONFIG_SMP + +#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ + __GET_CPUID(TMP) \ + sethi %hi(trap_block), DEST; \ + sllx TMP, TRAP_BLOCK_SZ_SHIFT, TMP; \ + or DEST, %lo(trap_block), DEST; \ + add DEST, TMP, DEST; \ + +/* Clobbers TMP, current address space PGD phys address into DEST. */ +#define TRAP_LOAD_PGD_PHYS(DEST, TMP) \ + TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ + ldx [DEST + TRAP_PER_CPU_PGD_PADDR], DEST; + +/* Clobbers TMP, loads local processor's IRQ work area into DEST. */ +#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP) \ + TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ + add DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST; + +/* Clobbers TMP, loads DEST with current thread info pointer. */ +#define TRAP_LOAD_THREAD_REG(DEST, TMP) \ + TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ + ldx [DEST + TRAP_PER_CPU_THREAD], DEST; + +/* Given the current thread info pointer in THR, load the per-cpu + * area base of the current processor into DEST. REG1, REG2, and REG3 are + * clobbered. + * + * You absolutely cannot use DEST as a temporary in this code. The + * reason is that traps can happen during execution, and return from + * trap will load the fully resolved DEST per-cpu base. This can corrupt + * the calculations done by the macro mid-stream. + */ +#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3) \ + lduh [THR + TI_CPU], REG1; \ + sethi %hi(__per_cpu_shift), REG3; \ + sethi %hi(__per_cpu_base), REG2; \ + ldx [REG3 + %lo(__per_cpu_shift)], REG3; \ + ldx [REG2 + %lo(__per_cpu_base)], REG2; \ + sllx REG1, REG3, REG3; \ + add REG3, REG2, DEST; + +#else + +#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ + sethi %hi(trap_block), DEST; \ + or DEST, %lo(trap_block), DEST; \ + +/* Uniprocessor versions, we know the cpuid is zero. */ +#define TRAP_LOAD_PGD_PHYS(DEST, TMP) \ + TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ + ldx [DEST + TRAP_PER_CPU_PGD_PADDR], DEST; + +/* Clobbers TMP, loads local processor's IRQ work area into DEST. */ +#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP) \ + TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ + add DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST; + +#define TRAP_LOAD_THREAD_REG(DEST, TMP) \ + TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ + ldx [DEST + TRAP_PER_CPU_THREAD], DEST; + +/* No per-cpu areas on uniprocessor, so no need to load DEST. */ +#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3) + +#endif /* !(CONFIG_SMP) */ + +#endif /* _SPARC64_CPUDATA_H */ diff --git a/arch/sparc/include/asm/cputime.h b/arch/sparc/include/asm/cputime.h new file mode 100644 index 00000000000..1a642b81e01 --- /dev/null +++ b/arch/sparc/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef __SPARC_CPUTIME_H +#define __SPARC_CPUTIME_H + +#include <asm-generic/cputime.h> + +#endif /* __SPARC_CPUTIME_H */ diff --git a/arch/sparc/include/asm/current.h b/arch/sparc/include/asm/current.h new file mode 100644 index 00000000000..10a0df55a57 --- /dev/null +++ b/arch/sparc/include/asm/current.h @@ -0,0 +1,34 @@ +/* include/asm/current.h + * + * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Copyright (C) 2002 Pete Zaitcev (zaitcev@yahoo.com) + * Copyright (C) 2007 David S. Miller (davem@davemloft.net) + * + * Derived from "include/asm-s390/current.h" by + * Martin Schwidefsky (schwidefsky@de.ibm.com) + * Derived from "include/asm-i386/current.h" +*/ +#ifndef _SPARC_CURRENT_H +#define _SPARC_CURRENT_H + +#include <linux/thread_info.h> + +#ifdef CONFIG_SPARC64 +register struct task_struct *current asm("g4"); +#endif + +#ifdef CONFIG_SPARC32 +/* We might want to consider using %g4 like sparc64 to shave a few cycles. + * + * Two stage process (inline + #define) for type-checking. + * We also obfuscate get_current() to check if anyone used that by mistake. + */ +struct task_struct; +static inline struct task_struct *__get_current(void) +{ + return current_thread_info()->task; +} +#define current __get_current() +#endif + +#endif /* !(_SPARC_CURRENT_H) */ diff --git a/arch/sparc/include/asm/cypress.h b/arch/sparc/include/asm/cypress.h new file mode 100644 index 00000000000..95e9772ea39 --- /dev/null +++ b/arch/sparc/include/asm/cypress.h @@ -0,0 +1,79 @@ +/* + * cypress.h: Cypress module specific definitions and defines. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_CYPRESS_H +#define _SPARC_CYPRESS_H + +/* Cypress chips have %psr 'impl' of '0001' and 'vers' of '0001'. */ + +/* The MMU control register fields on the Sparc Cypress 604/605 MMU's. + * + * --------------------------------------------------------------- + * |implvers| MCA | MCM |MV| MID |BM| C|RSV|MR|CM|CL|CE|RSV|NF|ME| + * --------------------------------------------------------------- + * 31 24 23-22 21-20 19 18-15 14 13 12 11 10 9 8 7-2 1 0 + * + * MCA: MultiChip Access -- Used for configuration of multiple + * CY7C604/605 cache units. + * MCM: MultiChip Mask -- Again, for multiple cache unit config. + * MV: MultiChip Valid -- Indicates MCM and MCA have valid settings. + * MID: ModuleID -- Unique processor ID for MBus transactions. (605 only) + * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode + * C: Cacheable -- Indicates whether accesses are cacheable while + * the MMU is off. 0=no 1=yes + * MR: MemoryReflection -- Indicates whether the bus attached to the + * MBus supports memory reflection. 0=no 1=yes (605 only) + * CM: CacheMode -- Indicates whether the cache is operating in write + * through or copy-back mode. 0=write-through 1=copy-back + * CL: CacheLock -- Indicates if the entire cache is locked or not. + * 0=not-locked 1=locked (604 only) + * CE: CacheEnable -- Is the virtual cache on? 0=no 1=yes + * NF: NoFault -- Do faults generate traps? 0=yes 1=no + * ME: MmuEnable -- Is the MMU doing translations? 0=no 1=yes + */ + +#define CYPRESS_MCA 0x00c00000 +#define CYPRESS_MCM 0x00300000 +#define CYPRESS_MVALID 0x00080000 +#define CYPRESS_MIDMASK 0x00078000 /* Only on 605 */ +#define CYPRESS_BMODE 0x00004000 +#define CYPRESS_ACENABLE 0x00002000 +#define CYPRESS_MRFLCT 0x00000800 /* Only on 605 */ +#define CYPRESS_CMODE 0x00000400 +#define CYPRESS_CLOCK 0x00000200 /* Only on 604 */ +#define CYPRESS_CENABLE 0x00000100 +#define CYPRESS_NFAULT 0x00000002 +#define CYPRESS_MENABLE 0x00000001 + +static inline void cypress_flush_page(unsigned long page) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : + "r" (page), "i" (ASI_M_FLUSH_PAGE)); +} + +static inline void cypress_flush_segment(unsigned long addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : + "r" (addr), "i" (ASI_M_FLUSH_SEG)); +} + +static inline void cypress_flush_region(unsigned long addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : + "r" (addr), "i" (ASI_M_FLUSH_REGION)); +} + +static inline void cypress_flush_context(void) +{ + __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : : + "i" (ASI_M_FLUSH_CTX)); +} + +/* XXX Displacement flushes for buggy chips and initial testing + * XXX go here. + */ + +#endif /* !(_SPARC_CYPRESS_H) */ diff --git a/arch/sparc/include/asm/dcr.h b/arch/sparc/include/asm/dcr.h new file mode 100644 index 00000000000..620c9ba642e --- /dev/null +++ b/arch/sparc/include/asm/dcr.h @@ -0,0 +1,14 @@ +#ifndef _SPARC64_DCR_H +#define _SPARC64_DCR_H + +/* UltraSparc-III/III+ Dispatch Control Register, ASR 0x12 */ +#define DCR_DPE 0x0000000000001000 /* III+: D$ Parity Error Enable */ +#define DCR_OBS 0x0000000000000fc0 /* Observability Bus Controls */ +#define DCR_BPE 0x0000000000000020 /* Branch Predict Enable */ +#define DCR_RPE 0x0000000000000010 /* Return Address Prediction Enable */ +#define DCR_SI 0x0000000000000008 /* Single Instruction Disable */ +#define DCR_IPE 0x0000000000000004 /* III+: I$ Parity Error Enable */ +#define DCR_IFPOE 0x0000000000000002 /* IRQ FP Operation Enable */ +#define DCR_MS 0x0000000000000001 /* Multi-Scalar dispatch */ + +#endif /* _SPARC64_DCR_H */ diff --git a/arch/sparc/include/asm/dcu.h b/arch/sparc/include/asm/dcu.h new file mode 100644 index 00000000000..0f704e106a1 --- /dev/null +++ b/arch/sparc/include/asm/dcu.h @@ -0,0 +1,27 @@ +#ifndef _SPARC64_DCU_H +#define _SPARC64_DCU_H + +#include <linux/const.h> + +/* UltraSparc-III Data Cache Unit Control Register */ +#define DCU_CP _AC(0x0002000000000000,UL) /* Phys Cache Enable w/o mmu */ +#define DCU_CV _AC(0x0001000000000000,UL) /* Virt Cache Enable w/o mmu */ +#define DCU_ME _AC(0x0000800000000000,UL) /* NC-store Merging Enable */ +#define DCU_RE _AC(0x0000400000000000,UL) /* RAW bypass Enable */ +#define DCU_PE _AC(0x0000200000000000,UL) /* PCache Enable */ +#define DCU_HPE _AC(0x0000100000000000,UL) /* HW prefetch Enable */ +#define DCU_SPE _AC(0x0000080000000000,UL) /* SW prefetch Enable */ +#define DCU_SL _AC(0x0000040000000000,UL) /* Secondary ld-steering Enab*/ +#define DCU_WE _AC(0x0000020000000000,UL) /* WCache enable */ +#define DCU_PM _AC(0x000001fe00000000,UL) /* PA Watchpoint Byte Mask */ +#define DCU_VM _AC(0x00000001fe000000,UL) /* VA Watchpoint Byte Mask */ +#define DCU_PR _AC(0x0000000001000000,UL) /* PA Watchpoint Read Enable */ +#define DCU_PW _AC(0x0000000000800000,UL) /* PA Watchpoint Write Enable*/ +#define DCU_VR _AC(0x0000000000400000,UL) /* VA Watchpoint Read Enable */ +#define DCU_VW _AC(0x0000000000200000,UL) /* VA Watchpoint Write Enable*/ +#define DCU_DM _AC(0x0000000000000008,UL) /* DMMU Enable */ +#define DCU_IM _AC(0x0000000000000004,UL) /* IMMU Enable */ +#define DCU_DC _AC(0x0000000000000002,UL) /* Data Cache Enable */ +#define DCU_IC _AC(0x0000000000000001,UL) /* Instruction Cache Enable */ + +#endif /* _SPARC64_DCU_H */ diff --git a/arch/sparc/include/asm/delay.h b/arch/sparc/include/asm/delay.h new file mode 100644 index 00000000000..467caa2a97a --- /dev/null +++ b/arch/sparc/include/asm/delay.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_DELAY_H +#define ___ASM_SPARC_DELAY_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/delay_64.h> +#else +#include <asm/delay_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/delay_32.h b/arch/sparc/include/asm/delay_32.h new file mode 100644 index 00000000000..bc9aba2bead --- /dev/null +++ b/arch/sparc/include/asm/delay_32.h @@ -0,0 +1,34 @@ +/* + * delay.h: Linux delay routines on the Sparc. + * + * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu). + */ + +#ifndef __SPARC_DELAY_H +#define __SPARC_DELAY_H + +#include <asm/cpudata.h> + +static inline void __delay(unsigned long loops) +{ + __asm__ __volatile__("cmp %0, 0\n\t" + "1: bne 1b\n\t" + "subcc %0, 1, %0\n" : + "=&r" (loops) : + "0" (loops) : + "cc"); +} + +/* This is too messy with inline asm on the Sparc. */ +extern void __udelay(unsigned long usecs, unsigned long lpj); +extern void __ndelay(unsigned long nsecs, unsigned long lpj); + +#ifdef CONFIG_SMP +#define __udelay_val cpu_data(smp_processor_id()).udelay_val +#else /* SMP */ +#define __udelay_val loops_per_jiffy +#endif /* SMP */ +#define udelay(__usecs) __udelay(__usecs, __udelay_val) +#define ndelay(__nsecs) __ndelay(__nsecs, __udelay_val) + +#endif /* defined(__SPARC_DELAY_H) */ diff --git a/arch/sparc/include/asm/delay_64.h b/arch/sparc/include/asm/delay_64.h new file mode 100644 index 00000000000..a77aa622d76 --- /dev/null +++ b/arch/sparc/include/asm/delay_64.h @@ -0,0 +1,17 @@ +/* delay.h: Linux delay routines on sparc64. + * + * Copyright (C) 1996, 2004, 2007 David S. Miller (davem@davemloft.net). + */ + +#ifndef _SPARC64_DELAY_H +#define _SPARC64_DELAY_H + +#ifndef __ASSEMBLY__ + +extern void __delay(unsigned long loops); +extern void udelay(unsigned long usecs); +#define mdelay(n) udelay((n) * 1000) + +#endif /* !__ASSEMBLY__ */ + +#endif /* _SPARC64_DELAY_H */ diff --git a/arch/sparc/include/asm/device.h b/arch/sparc/include/asm/device.h new file mode 100644 index 00000000000..19790eb99cc --- /dev/null +++ b/arch/sparc/include/asm/device.h @@ -0,0 +1,23 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#ifndef _ASM_SPARC_DEVICE_H +#define _ASM_SPARC_DEVICE_H + +struct device_node; +struct of_device; + +struct dev_archdata { + void *iommu; + void *stc; + void *host_controller; + + struct device_node *prom_node; + struct of_device *op; + + int numa_node; +}; + +#endif /* _ASM_SPARC_DEVICE_H */ diff --git a/arch/sparc/include/asm/display7seg.h b/arch/sparc/include/asm/display7seg.h new file mode 100644 index 00000000000..86d4a901df2 --- /dev/null +++ b/arch/sparc/include/asm/display7seg.h @@ -0,0 +1,79 @@ +/* + * + * display7seg - Driver interface for the 7-segment display + * present on Sun Microsystems CP1400 and CP1500 + * + * Copyright (c) 2000 Eric Brower <ebrower@usa.net> + * + */ + +#ifndef __display7seg_h__ +#define __display7seg_h__ + +#define D7S_IOC 'p' + +#define D7SIOCRD _IOR(D7S_IOC, 0x45, int) /* Read device state */ +#define D7SIOCWR _IOW(D7S_IOC, 0x46, int) /* Write device state */ +#define D7SIOCTM _IO (D7S_IOC, 0x47) /* Translate mode (FLIP)*/ + +/* + * ioctl flag definitions + * + * POINT - Toggle decimal point (0=absent 1=present) + * ALARM - Toggle alarm LED (0=green 1=red) + * FLIP - Toggle inverted mode (0=normal 1=flipped) + * bits 0-4 - Character displayed (see definitions below) + * + * Display segments are defined as follows, + * subject to D7S_FLIP register state: + * + * a + * --- + * f| |b + * -g- + * e| |c + * --- + * d + */ + +#define D7S_POINT (1 << 7) /* Decimal point*/ +#define D7S_ALARM (1 << 6) /* Alarm LED */ +#define D7S_FLIP (1 << 5) /* Flip display */ + +#define D7S_0 0x00 /* Numerals 0-9 */ +#define D7S_1 0x01 +#define D7S_2 0x02 +#define D7S_3 0x03 +#define D7S_4 0x04 +#define D7S_5 0x05 +#define D7S_6 0x06 +#define D7S_7 0x07 +#define D7S_8 0x08 +#define D7S_9 0x09 +#define D7S_A 0x0A /* Letters A-F, H, L, P */ +#define D7S_B 0x0B +#define D7S_C 0x0C +#define D7S_D 0x0D +#define D7S_E 0x0E +#define D7S_F 0x0F +#define D7S_H 0x10 +#define D7S_E2 0x11 +#define D7S_L 0x12 +#define D7S_P 0x13 +#define D7S_SEGA 0x14 /* Individual segments */ +#define D7S_SEGB 0x15 +#define D7S_SEGC 0x16 +#define D7S_SEGD 0x17 +#define D7S_SEGE 0x18 +#define D7S_SEGF 0x19 +#define D7S_SEGG 0x1A +#define D7S_SEGABFG 0x1B /* Segment groupings */ +#define D7S_SEGCDEG 0x1C +#define D7S_SEGBCEF 0x1D +#define D7S_SEGADG 0x1E +#define D7S_BLANK 0x1F /* Clear all segments */ + +#define D7S_MIN_VAL 0x0 +#define D7S_MAX_VAL 0x1F + +#endif /* ifndef __display7seg_h__ */ diff --git a/arch/sparc/include/asm/div64.h b/arch/sparc/include/asm/div64.h new file mode 100644 index 00000000000..6cd978cefb2 --- /dev/null +++ b/arch/sparc/include/asm/div64.h @@ -0,0 +1 @@ +#include <asm-generic/div64.h> diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h new file mode 100644 index 00000000000..0f4150e2661 --- /dev/null +++ b/arch/sparc/include/asm/dma-mapping.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_DMA_MAPPING_H +#define ___ASM_SPARC_DMA_MAPPING_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/dma-mapping_64.h> +#else +#include <asm/dma-mapping_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/dma-mapping_32.h b/arch/sparc/include/asm/dma-mapping_32.h new file mode 100644 index 00000000000..f3a641e6b2c --- /dev/null +++ b/arch/sparc/include/asm/dma-mapping_32.h @@ -0,0 +1,11 @@ +#ifndef _ASM_SPARC_DMA_MAPPING_H +#define _ASM_SPARC_DMA_MAPPING_H + + +#ifdef CONFIG_PCI +#include <asm-generic/dma-mapping.h> +#else +#include <asm-generic/dma-mapping-broken.h> +#endif /* PCI */ + +#endif /* _ASM_SPARC_DMA_MAPPING_H */ diff --git a/arch/sparc/include/asm/dma-mapping_64.h b/arch/sparc/include/asm/dma-mapping_64.h new file mode 100644 index 00000000000..bfa64f9702d --- /dev/null +++ b/arch/sparc/include/asm/dma-mapping_64.h @@ -0,0 +1,154 @@ +#ifndef _ASM_SPARC64_DMA_MAPPING_H +#define _ASM_SPARC64_DMA_MAPPING_H + +#include <linux/scatterlist.h> +#include <linux/mm.h> + +#define DMA_ERROR_CODE (~(dma_addr_t)0x0) + +struct dma_ops { + void *(*alloc_coherent)(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); + void (*free_coherent)(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle); + dma_addr_t (*map_single)(struct device *dev, void *cpu_addr, + size_t size, + enum dma_data_direction direction); + void (*unmap_single)(struct device *dev, dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction); + int (*map_sg)(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction); + void (*unmap_sg)(struct device *dev, struct scatterlist *sg, + int nhwentries, + enum dma_data_direction direction); + void (*sync_single_for_cpu)(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction); + void (*sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg, + int nelems, + enum dma_data_direction direction); +}; +extern const struct dma_ops *dma_ops; + +extern int dma_supported(struct device *dev, u64 mask); +extern int dma_set_mask(struct device *dev, u64 dma_mask); + +static inline void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + return dma_ops->alloc_coherent(dev, size, dma_handle, flag); +} + +static inline void dma_free_coherent(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle) +{ + dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); +} + +static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, + size_t size, + enum dma_data_direction direction) +{ + return dma_ops->map_single(dev, cpu_addr, size, direction); +} + +static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction) +{ + dma_ops->unmap_single(dev, dma_addr, size, direction); +} + +static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + return dma_ops->map_single(dev, page_address(page) + offset, + size, direction); +} + +static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, + enum dma_data_direction direction) +{ + dma_ops->unmap_single(dev, dma_address, size, direction); +} + +static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ + return dma_ops->map_sg(dev, sg, nents, direction); +} + +static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ + dma_ops->unmap_sg(dev, sg, nents, direction); +} + +static inline void dma_sync_single_for_cpu(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + dma_ops->sync_single_for_cpu(dev, dma_handle, size, direction); +} + +static inline void dma_sync_single_for_device(struct device *dev, + dma_addr_t dma_handle, + size_t size, + enum dma_data_direction direction) +{ + /* No flushing needed to sync cpu writes to the device. */ +} + +static inline void dma_sync_single_range_for_cpu(struct device *dev, + dma_addr_t dma_handle, + unsigned long offset, + size_t size, + enum dma_data_direction direction) +{ + dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction); +} + +static inline void dma_sync_single_range_for_device(struct device *dev, + dma_addr_t dma_handle, + unsigned long offset, + size_t size, + enum dma_data_direction direction) +{ + /* No flushing needed to sync cpu writes to the device. */ +} + + +static inline void dma_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + dma_ops->sync_sg_for_cpu(dev, sg, nelems, direction); +} + +static inline void dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + /* No flushing needed to sync cpu writes to the device. */ +} + +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return (dma_addr == DMA_ERROR_CODE); +} + +static inline int dma_get_cache_alignment(void) +{ + /* no easy way to get cache size on all processors, so return + * the maximum possible, to be safe */ + return (1 << INTERNODE_CACHE_SHIFT); +} + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) +#define dma_is_consistent(d, h) (1) + +#endif /* _ASM_SPARC64_DMA_MAPPING_H */ diff --git a/arch/sparc/include/asm/dma.h b/arch/sparc/include/asm/dma.h new file mode 100644 index 00000000000..aa1d90ac04c --- /dev/null +++ b/arch/sparc/include/asm/dma.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_DMA_H +#define ___ASM_SPARC_DMA_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/dma_64.h> +#else +#include <asm/dma_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/dma_32.h b/arch/sparc/include/asm/dma_32.h new file mode 100644 index 00000000000..cf7189c0079 --- /dev/null +++ b/arch/sparc/include/asm/dma_32.h @@ -0,0 +1,288 @@ +/* include/asm/dma.h + * + * Copyright 1995 (C) David S. Miller (davem@davemloft.net) + */ + +#ifndef _ASM_SPARC_DMA_H +#define _ASM_SPARC_DMA_H + +#include <linux/kernel.h> +#include <linux/types.h> + +#include <asm/vac-ops.h> /* for invalidate's, etc. */ +#include <asm/sbus.h> +#include <asm/delay.h> +#include <asm/oplib.h> +#include <asm/system.h> +#include <asm/io.h> +#include <linux/spinlock.h> + +struct page; +extern spinlock_t dma_spin_lock; + +static inline unsigned long claim_dma_lock(void) +{ + unsigned long flags; + spin_lock_irqsave(&dma_spin_lock, flags); + return flags; +} + +static inline void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} + +/* These are irrelevant for Sparc DMA, but we leave it in so that + * things can compile. + */ +#define MAX_DMA_CHANNELS 8 +#define MAX_DMA_ADDRESS (~0UL) +#define DMA_MODE_READ 1 +#define DMA_MODE_WRITE 2 + +/* Useful constants */ +#define SIZE_16MB (16*1024*1024) +#define SIZE_64K (64*1024) + +/* SBUS DMA controller reg offsets */ +#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */ +#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */ +#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */ +#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */ + +/* DVMA chip revisions */ +enum dvma_rev { + dvmarev0, + dvmaesc1, + dvmarev1, + dvmarev2, + dvmarev3, + dvmarevplus, + dvmahme +}; + +#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1) + +/* Linux DMA information structure, filled during probe. */ +struct sbus_dma { + struct sbus_dma *next; + struct sbus_dev *sdev; + void __iomem *regs; + + /* Status, misc info */ + int node; /* Prom node for this DMA device */ + int running; /* Are we doing DMA now? */ + int allocated; /* Are we "owned" by anyone yet? */ + + /* Transfer information. */ + unsigned long addr; /* Start address of current transfer */ + int nbytes; /* Size of current transfer */ + int realbytes; /* For splitting up large transfers, etc. */ + + /* DMA revision */ + enum dvma_rev revision; +}; + +extern struct sbus_dma *dma_chain; + +/* Broken hardware... */ +#ifdef CONFIG_SUN4 +/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken? + * Or is rev0 present only on sun4 boxes? -jj */ +#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1) +#else +#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1) +#endif +#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1) + +/* Main routines in dma.c */ +extern void dvma_init(struct sbus_bus *); + +/* Fields in the cond_reg register */ +/* First, the version identification bits */ +#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */ +#define DMA_VERS0 0x00000000 /* Sunray DMA version */ +#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */ +#define DMA_VERS1 0x80000000 /* DMA rev 1 */ +#define DMA_VERS2 0xa0000000 /* DMA rev 2 */ +#define DMA_VERHME 0xb0000000 /* DMA hme gate array */ +#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */ + +#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */ +#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */ +#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */ +#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */ +#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */ +#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */ +#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */ +#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */ +#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */ +#define DMA_RST_BPP DMA_RST_SCSI /* Reset the BPP controller */ +#define DMA_ST_WRITE 0x00000100 /* write from device to memory */ +#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */ +#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */ +#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */ +#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */ +#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */ +#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */ +#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */ +#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */ +#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */ +#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */ +#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */ +#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */ +#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */ +#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */ +#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */ +#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */ +#define DMA_BRST64 0x00080000 /* SCSI: 64byte bursts (HME on UltraSparc only) */ +#define DMA_BRST32 0x00040000 /* SCSI/BPP: 32byte bursts */ +#define DMA_BRST16 0x00000000 /* SCSI/BPP: 16byte bursts */ +#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */ +#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */ +#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */ +#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */ +#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */ +#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */ +#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */ +#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */ +#define DMA_BPP_ON DMA_SCSI_ON /* Enable BPP dma */ +#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */ +#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */ +#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */ +#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */ + +/* Values describing the burst-size property from the PROM */ +#define DMA_BURST1 0x01 +#define DMA_BURST2 0x02 +#define DMA_BURST4 0x04 +#define DMA_BURST8 0x08 +#define DMA_BURST16 0x10 +#define DMA_BURST32 0x20 +#define DMA_BURST64 0x40 +#define DMA_BURSTBITS 0x7f + +/* Determine highest possible final transfer address given a base */ +#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL)) + +/* Yes, I hack a lot of elisp in my spare time... */ +#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR)) +#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))) +#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE)) +#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE))) +#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB))) +#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB))) +#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV)) +#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr)) +#define DMA_BEGINDMA_W(regs) \ + ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB)))) +#define DMA_BEGINDMA_R(regs) \ + ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE))))) + +/* For certain DMA chips, we need to disable ints upon irq entry + * and turn them back on when we are done. So in any ESP interrupt + * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT + * when leaving the handler. You have been warned... + */ +#define DMA_IRQ_ENTRY(dma, dregs) do { \ + if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \ + } while (0) + +#define DMA_IRQ_EXIT(dma, dregs) do { \ + if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \ + } while(0) + +#if 0 /* P3 this stuff is inline in ledma.c:init_restart_ledma() */ +/* Pause until counter runs out or BIT isn't set in the DMA condition + * register. + */ +static inline void sparc_dma_pause(struct sparc_dma_registers *regs, + unsigned long bit) +{ + int ctr = 50000; /* Let's find some bugs ;) */ + + /* Busy wait until the bit is not set any more */ + while((regs->cond_reg&bit) && (ctr>0)) { + ctr--; + __delay(5); + } + + /* Check for bogus outcome. */ + if(!ctr) + panic("DMA timeout"); +} + +/* Reset the friggin' thing... */ +#define DMA_RESET(dma) do { \ + struct sparc_dma_registers *regs = dma->regs; \ + /* Let the current FIFO drain itself */ \ + sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \ + /* Reset the logic */ \ + regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \ + __delay(400); /* let the bits set ;) */ \ + regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \ + sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \ + /* Enable FAST transfers if available */ \ + if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \ + dma->running = 0; \ +} while(0) +#endif + +#define for_each_dvma(dma) \ + for((dma) = dma_chain; (dma); (dma) = (dma)->next) + +extern int get_dma_list(char *); +extern int request_dma(unsigned int, __const__ char *); +extern void free_dma(unsigned int); + +/* From PCI */ + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +/* Routines for data transfer buffers. */ +BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long) +BTFIXUPDEF_CALL(void, mmu_unlockarea, char *, unsigned long) + +#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len) +#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len) + +/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */ +BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus) +BTFIXUPDEF_CALL(void, mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus) +BTFIXUPDEF_CALL(void, mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus) +BTFIXUPDEF_CALL(void, mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus) + +#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus) +#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus) +#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus) +#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus) + +/* + * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep. + * + * The mmu_map_dma_area establishes two mappings in one go. + * These mappings point to pages normally mapped at 'va' (linear address). + * First mapping is for CPU visible address at 'a', uncached. + * This is an alias, but it works because it is an uncached mapping. + * Second mapping is for device visible address, or "bus" address. + * The bus address is returned at '*pba'. + * + * These functions seem distinct, but are hard to split. On sun4c, + * at least for now, 'a' is equal to bus address, and retured in *pba. + * On sun4m, page attributes depend on the CPU type, so we have to + * know if we are mapping RAM or I/O, so it has to be an additional argument + * to a separate mapping function for CPU visible mappings. + */ +BTFIXUPDEF_CALL(int, mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len) +BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa) +BTFIXUPDEF_CALL(void, mmu_unmap_dma_area, unsigned long busa, int len) + +#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len) +#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len) +#define mmu_translate_dvma(ba) BTFIXUP_CALL(mmu_translate_dvma)(ba) + +#endif /* !(_ASM_SPARC_DMA_H) */ diff --git a/arch/sparc/include/asm/dma_64.h b/arch/sparc/include/asm/dma_64.h new file mode 100644 index 00000000000..46a8aecffc0 --- /dev/null +++ b/arch/sparc/include/asm/dma_64.h @@ -0,0 +1,205 @@ +/* + * include/asm/dma.h + * + * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _ASM_SPARC64_DMA_H +#define _ASM_SPARC64_DMA_H + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> + +#include <asm/sbus.h> +#include <asm/delay.h> +#include <asm/oplib.h> + +/* These are irrelevant for Sparc DMA, but we leave it in so that + * things can compile. + */ +#define MAX_DMA_CHANNELS 8 +#define DMA_MODE_READ 1 +#define DMA_MODE_WRITE 2 +#define MAX_DMA_ADDRESS (~0UL) + +/* Useful constants */ +#define SIZE_16MB (16*1024*1024) +#define SIZE_64K (64*1024) + +/* SBUS DMA controller reg offsets */ +#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */ +#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */ +#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */ +#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */ + +/* DVMA chip revisions */ +enum dvma_rev { + dvmarev0, + dvmaesc1, + dvmarev1, + dvmarev2, + dvmarev3, + dvmarevplus, + dvmahme +}; + +#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1) + +/* Linux DMA information structure, filled during probe. */ +struct sbus_dma { + struct sbus_dma *next; + struct sbus_dev *sdev; + void __iomem *regs; + + /* Status, misc info */ + int node; /* Prom node for this DMA device */ + int running; /* Are we doing DMA now? */ + int allocated; /* Are we "owned" by anyone yet? */ + + /* Transfer information. */ + u32 addr; /* Start address of current transfer */ + int nbytes; /* Size of current transfer */ + int realbytes; /* For splitting up large transfers, etc. */ + + /* DMA revision */ + enum dvma_rev revision; +}; + +extern struct sbus_dma *dma_chain; + +/* Broken hardware... */ +#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1) +#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1) + +/* Main routines in dma.c */ +extern void dvma_init(struct sbus_bus *); + +/* Fields in the cond_reg register */ +/* First, the version identification bits */ +#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */ +#define DMA_VERS0 0x00000000 /* Sunray DMA version */ +#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */ +#define DMA_VERS1 0x80000000 /* DMA rev 1 */ +#define DMA_VERS2 0xa0000000 /* DMA rev 2 */ +#define DMA_VERHME 0xb0000000 /* DMA hme gate array */ +#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */ + +#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */ +#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */ +#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */ +#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */ +#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */ +#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */ +#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */ +#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */ +#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */ +#define DMA_ST_WRITE 0x00000100 /* write from device to memory */ +#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */ +#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */ +#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */ +#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */ +#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */ +#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */ +#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */ +#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */ +#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */ +#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */ +#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */ +#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */ +#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */ +#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */ +#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */ +#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */ +#define DMA_BRST64 0x000c0000 /* SCSI: 64byte bursts (HME on UltraSparc only) */ +#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */ +#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */ +#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */ +#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */ +#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */ +#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */ +#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */ +#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */ +#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */ +#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */ +#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */ +#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */ +#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */ +#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */ + +/* Values describing the burst-size property from the PROM */ +#define DMA_BURST1 0x01 +#define DMA_BURST2 0x02 +#define DMA_BURST4 0x04 +#define DMA_BURST8 0x08 +#define DMA_BURST16 0x10 +#define DMA_BURST32 0x20 +#define DMA_BURST64 0x40 +#define DMA_BURSTBITS 0x7f + +/* Determine highest possible final transfer address given a base */ +#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL)) + +/* Yes, I hack a lot of elisp in my spare time... */ +#define DMA_ERROR_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR)) +#define DMA_IRQ_P(regs) ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)) +#define DMA_WRITE_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE)) +#define DMA_OFF(__regs) \ +do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ + tmp &= ~DMA_ENABLE; \ + sbus_writel(tmp, (__regs) + DMA_CSR); \ +} while(0) +#define DMA_INTSOFF(__regs) \ +do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ + tmp &= ~DMA_INT_ENAB; \ + sbus_writel(tmp, (__regs) + DMA_CSR); \ +} while(0) +#define DMA_INTSON(__regs) \ +do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ + tmp |= DMA_INT_ENAB; \ + sbus_writel(tmp, (__regs) + DMA_CSR); \ +} while(0) +#define DMA_PUNTFIFO(__regs) \ +do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ + tmp |= DMA_FIFO_INV; \ + sbus_writel(tmp, (__regs) + DMA_CSR); \ +} while(0) +#define DMA_SETSTART(__regs, __addr) \ + sbus_writel((u32)(__addr), (__regs) + DMA_ADDR); +#define DMA_BEGINDMA_W(__regs) \ +do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ + tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \ + sbus_writel(tmp, (__regs) + DMA_CSR); \ +} while(0) +#define DMA_BEGINDMA_R(__regs) \ +do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ + tmp |= (DMA_ENABLE|DMA_INT_ENAB); \ + tmp &= ~DMA_ST_WRITE; \ + sbus_writel(tmp, (__regs) + DMA_CSR); \ +} while(0) + +/* For certain DMA chips, we need to disable ints upon irq entry + * and turn them back on when we are done. So in any ESP interrupt + * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT + * when leaving the handler. You have been warned... + */ +#define DMA_IRQ_ENTRY(dma, dregs) do { \ + if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \ + } while (0) + +#define DMA_IRQ_EXIT(dma, dregs) do { \ + if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \ + } while(0) + +#define for_each_dvma(dma) \ + for((dma) = dma_chain; (dma); (dma) = (dma)->next) + +/* From PCI */ + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* !(_ASM_SPARC64_DMA_H) */ diff --git a/arch/sparc/include/asm/ebus.h b/arch/sparc/include/asm/ebus.h new file mode 100644 index 00000000000..83a6d16c22e --- /dev/null +++ b/arch/sparc/include/asm/ebus.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_EBUS_H +#define ___ASM_SPARC_EBUS_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/ebus_64.h> +#else +#include <asm/ebus_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/ebus_32.h b/arch/sparc/include/asm/ebus_32.h new file mode 100644 index 00000000000..29cb7dfc6b7 --- /dev/null +++ b/arch/sparc/include/asm/ebus_32.h @@ -0,0 +1,99 @@ +/* + * ebus.h: PCI to Ebus pseudo driver software state. + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * + * Adopted for sparc by V. Roganov and G. Raiko. + */ + +#ifndef __SPARC_EBUS_H +#define __SPARC_EBUS_H + +#ifndef _LINUX_IOPORT_H +#include <linux/ioport.h> +#endif +#include <asm/oplib.h> +#include <asm/prom.h> +#include <asm/of_device.h> + +struct linux_ebus_child { + struct linux_ebus_child *next; + struct linux_ebus_device *parent; + struct linux_ebus *bus; + struct device_node *prom_node; + struct resource resource[PROMREG_MAX]; + int num_addrs; + unsigned int irqs[PROMINTR_MAX]; + int num_irqs; +}; + +struct linux_ebus_device { + struct of_device ofdev; + struct linux_ebus_device *next; + struct linux_ebus_child *children; + struct linux_ebus *bus; + struct device_node *prom_node; + struct resource resource[PROMREG_MAX]; + int num_addrs; + unsigned int irqs[PROMINTR_MAX]; + int num_irqs; +}; +#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev) + +struct linux_ebus { + struct of_device ofdev; + struct linux_ebus *next; + struct linux_ebus_device *devices; + struct linux_pbm_info *parent; + struct pci_dev *self; + struct device_node *prom_node; +}; +#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev) + +struct linux_ebus_dma { + unsigned int dcsr; + unsigned int dacr; + unsigned int dbcr; +}; + +#define EBUS_DCSR_INT_PEND 0x00000001 +#define EBUS_DCSR_ERR_PEND 0x00000002 +#define EBUS_DCSR_DRAIN 0x00000004 +#define EBUS_DCSR_INT_EN 0x00000010 +#define EBUS_DCSR_RESET 0x00000080 +#define EBUS_DCSR_WRITE 0x00000100 +#define EBUS_DCSR_EN_DMA 0x00000200 +#define EBUS_DCSR_CYC_PEND 0x00000400 +#define EBUS_DCSR_DIAG_RD_DONE 0x00000800 +#define EBUS_DCSR_DIAG_WR_DONE 0x00001000 +#define EBUS_DCSR_EN_CNT 0x00002000 +#define EBUS_DCSR_TC 0x00004000 +#define EBUS_DCSR_DIS_CSR_DRN 0x00010000 +#define EBUS_DCSR_BURST_SZ_MASK 0x000c0000 +#define EBUS_DCSR_BURST_SZ_1 0x00080000 +#define EBUS_DCSR_BURST_SZ_4 0x00000000 +#define EBUS_DCSR_BURST_SZ_8 0x00040000 +#define EBUS_DCSR_BURST_SZ_16 0x000c0000 +#define EBUS_DCSR_DIAG_EN 0x00100000 +#define EBUS_DCSR_DIS_ERR_PEND 0x00400000 +#define EBUS_DCSR_TCI_DIS 0x00800000 +#define EBUS_DCSR_EN_NEXT 0x01000000 +#define EBUS_DCSR_DMA_ON 0x02000000 +#define EBUS_DCSR_A_LOADED 0x04000000 +#define EBUS_DCSR_NA_LOADED 0x08000000 +#define EBUS_DCSR_DEV_ID_MASK 0xf0000000 + +extern struct linux_ebus *ebus_chain; + +extern void ebus_init(void); + +#define for_each_ebus(bus) \ + for((bus) = ebus_chain; (bus); (bus) = (bus)->next) + +#define for_each_ebusdev(dev, bus) \ + for((dev) = (bus)->devices; (dev); (dev) = (dev)->next) + +#define for_each_edevchild(dev, child) \ + for((child) = (dev)->children; (child); (child) = (child)->next) + +#endif /* !(__SPARC_EBUS_H) */ diff --git a/arch/sparc/include/asm/ebus_64.h b/arch/sparc/include/asm/ebus_64.h new file mode 100644 index 00000000000..fcc62b97ced --- /dev/null +++ b/arch/sparc/include/asm/ebus_64.h @@ -0,0 +1,94 @@ +/* + * ebus.h: PCI to Ebus pseudo driver software state. + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 1999 David S. Miller (davem@redhat.com) + */ + +#ifndef __SPARC64_EBUS_H +#define __SPARC64_EBUS_H + +#include <asm/oplib.h> +#include <asm/prom.h> +#include <asm/of_device.h> + +struct linux_ebus_child { + struct linux_ebus_child *next; + struct linux_ebus_device *parent; + struct linux_ebus *bus; + struct device_node *prom_node; + struct resource resource[PROMREG_MAX]; + int num_addrs; + unsigned int irqs[PROMINTR_MAX]; + int num_irqs; +}; + +struct linux_ebus_device { + struct of_device ofdev; + struct linux_ebus_device *next; + struct linux_ebus_child *children; + struct linux_ebus *bus; + struct device_node *prom_node; + struct resource resource[PROMREG_MAX]; + int num_addrs; + unsigned int irqs[PROMINTR_MAX]; + int num_irqs; +}; +#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev) + +struct linux_ebus { + struct of_device ofdev; + struct linux_ebus *next; + struct linux_ebus_device *devices; + struct pci_dev *self; + int index; + int is_rio; + struct device_node *prom_node; +}; +#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev) + +struct ebus_dma_info { + spinlock_t lock; + void __iomem *regs; + + unsigned int flags; +#define EBUS_DMA_FLAG_USE_EBDMA_HANDLER 0x00000001 +#define EBUS_DMA_FLAG_TCI_DISABLE 0x00000002 + + /* These are only valid is EBUS_DMA_FLAG_USE_EBDMA_HANDLER is + * set. + */ + void (*callback)(struct ebus_dma_info *p, int event, void *cookie); + void *client_cookie; + unsigned int irq; +#define EBUS_DMA_EVENT_ERROR 1 +#define EBUS_DMA_EVENT_DMA 2 +#define EBUS_DMA_EVENT_DEVICE 4 + + unsigned char name[64]; +}; + +extern int ebus_dma_register(struct ebus_dma_info *p); +extern int ebus_dma_irq_enable(struct ebus_dma_info *p, int on); +extern void ebus_dma_unregister(struct ebus_dma_info *p); +extern int ebus_dma_request(struct ebus_dma_info *p, dma_addr_t bus_addr, + size_t len); +extern void ebus_dma_prepare(struct ebus_dma_info *p, int write); +extern unsigned int ebus_dma_residue(struct ebus_dma_info *p); +extern unsigned int ebus_dma_addr(struct ebus_dma_info *p); +extern void ebus_dma_enable(struct ebus_dma_info *p, int on); + +extern struct linux_ebus *ebus_chain; + +extern void ebus_init(void); + +#define for_each_ebus(bus) \ + for((bus) = ebus_chain; (bus); (bus) = (bus)->next) + +#define for_each_ebusdev(dev, bus) \ + for((dev) = (bus)->devices; (dev); (dev) = (dev)->next) + +#define for_each_edevchild(dev, child) \ + for((child) = (dev)->children; (child); (child) = (child)->next) + +#endif /* !(__SPARC64_EBUS_H) */ diff --git a/arch/sparc/include/asm/ecc.h b/arch/sparc/include/asm/ecc.h new file mode 100644 index 00000000000..ccb84b66fef --- /dev/null +++ b/arch/sparc/include/asm/ecc.h @@ -0,0 +1,122 @@ +/* + * ecc.h: Definitions and defines for the external cache/memory + * controller on the sun4m. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_ECC_H +#define _SPARC_ECC_H + +/* These registers are accessed through the SRMMU passthrough ASI 0x20 */ +#define ECC_ENABLE 0x00000000 /* ECC enable register */ +#define ECC_FSTATUS 0x00000008 /* ECC fault status register */ +#define ECC_FADDR 0x00000010 /* ECC fault address register */ +#define ECC_DIGNOSTIC 0x00000018 /* ECC diagnostics register */ +#define ECC_MBAENAB 0x00000020 /* MBus arbiter enable register */ +#define ECC_DMESG 0x00001000 /* Diagnostic message passing area */ + +/* ECC MBus Arbiter Enable register: + * + * ---------------------------------------- + * | |SBUS|MOD3|MOD2|MOD1|RSV| + * ---------------------------------------- + * 31 5 4 3 2 1 0 + * + * SBUS: Enable MBus Arbiter on the SBus 0=off 1=on + * MOD3: Enable MBus Arbiter on MBus module 3 0=off 1=on + * MOD2: Enable MBus Arbiter on MBus module 2 0=off 1=on + * MOD1: Enable MBus Arbiter on MBus module 1 0=off 1=on + */ + +#define ECC_MBAE_SBUS 0x00000010 +#define ECC_MBAE_MOD3 0x00000008 +#define ECC_MBAE_MOD2 0x00000004 +#define ECC_MBAE_MOD1 0x00000002 + +/* ECC Fault Control Register layout: + * + * ----------------------------- + * | RESV | ECHECK | EINT | + * ----------------------------- + * 31 2 1 0 + * + * ECHECK: Enable ECC checking. 0=off 1=on + * EINT: Enable Interrupts for correctable errors. 0=off 1=on + */ +#define ECC_FCR_CHECK 0x00000002 +#define ECC_FCR_INTENAB 0x00000001 + +/* ECC Fault Address Register Zero layout: + * + * ----------------------------------------------------- + * | MID | S | RSV | VA | BM |AT| C| SZ |TYP| PADDR | + * ----------------------------------------------------- + * 31-28 27 26-22 21-14 13 12 11 10-8 7-4 3-0 + * + * MID: ModuleID of the faulting processor. ie. who did it? + * S: Supervisor/Privileged access? 0=no 1=yes + * VA: Bits 19-12 of the virtual faulting address, these are the + * superset bits in the virtual cache and can be used for + * a flush operation if necessary. + * BM: Boot mode? 0=no 1=yes This is just like the SRMMU boot + * mode bit. + * AT: Did this fault happen during an atomic instruction? 0=no + * 1=yes. This means either an 'ldstub' or 'swap' instruction + * was in progress (but not finished) when this fault happened. + * This indicated whether the bus was locked when the fault + * occurred. + * C: Did the pte for this access indicate that it was cacheable? + * 0=no 1=yes + * SZ: The size of the transaction. + * TYP: The transaction type. + * PADDR: Bits 35-32 of the physical address for the fault. + */ +#define ECC_FADDR0_MIDMASK 0xf0000000 +#define ECC_FADDR0_S 0x08000000 +#define ECC_FADDR0_VADDR 0x003fc000 +#define ECC_FADDR0_BMODE 0x00002000 +#define ECC_FADDR0_ATOMIC 0x00001000 +#define ECC_FADDR0_CACHE 0x00000800 +#define ECC_FADDR0_SIZE 0x00000700 +#define ECC_FADDR0_TYPE 0x000000f0 +#define ECC_FADDR0_PADDR 0x0000000f + +/* ECC Fault Address Register One layout: + * + * ------------------------------------- + * | Physical Address 31-0 | + * ------------------------------------- + * 31 0 + * + * You get the upper 4 bits of the physical address from the + * PADDR field in ECC Fault Address Zero register. + */ + +/* ECC Fault Status Register layout: + * + * ---------------------------------------------- + * | RESV|C2E|MULT|SYNDROME|DWORD|UNC|TIMEO|BS|C| + * ---------------------------------------------- + * 31-18 17 16 15-8 7-4 3 2 1 0 + * + * C2E: A C2 graphics error occurred. 0=no 1=yes (SS10 only) + * MULT: Multiple errors occurred ;-O 0=no 1=prom_panic(yes) + * SYNDROME: Controller is mentally unstable. + * DWORD: + * UNC: Uncorrectable error. 0=no 1=yes + * TIMEO: Timeout occurred. 0=no 1=yes + * BS: C2 graphics bad slot access. 0=no 1=yes (SS10 only) + * C: Correctable error? 0=no 1=yes + */ + +#define ECC_FSR_C2ERR 0x00020000 +#define ECC_FSR_MULT 0x00010000 +#define ECC_FSR_SYND 0x0000ff00 +#define ECC_FSR_DWORD 0x000000f0 +#define ECC_FSR_UNC 0x00000008 +#define ECC_FSR_TIMEO 0x00000004 +#define ECC_FSR_BADSLOT 0x00000002 +#define ECC_FSR_C 0x00000001 + +#endif /* !(_SPARC_ECC_H) */ diff --git a/arch/sparc/include/asm/eeprom.h b/arch/sparc/include/asm/eeprom.h new file mode 100644 index 00000000000..e17beeceb40 --- /dev/null +++ b/arch/sparc/include/asm/eeprom.h @@ -0,0 +1,9 @@ +/* + * eeprom.h: Definitions for the Sun eeprom. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +/* The EEPROM and the Mostek Mk48t02 use the same IO address space + * for their registers/data areas. The IDPROM lives here too. + */ diff --git a/arch/sparc/include/asm/elf.h b/arch/sparc/include/asm/elf.h new file mode 100644 index 00000000000..0a2816c50b0 --- /dev/null +++ b/arch/sparc/include/asm/elf.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_ELF_H +#define ___ASM_SPARC_ELF_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/elf_64.h> +#else +#include <asm/elf_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/elf_32.h b/arch/sparc/include/asm/elf_32.h new file mode 100644 index 00000000000..d043f80bc2f --- /dev/null +++ b/arch/sparc/include/asm/elf_32.h @@ -0,0 +1,145 @@ +#ifndef __ASMSPARC_ELF_H +#define __ASMSPARC_ELF_H + +/* + * ELF register definitions.. + */ + +#include <asm/ptrace.h> + +/* + * Sparc section types + */ +#define STT_REGISTER 13 + +/* + * Sparc ELF relocation types + */ +#define R_SPARC_NONE 0 +#define R_SPARC_8 1 +#define R_SPARC_16 2 +#define R_SPARC_32 3 +#define R_SPARC_DISP8 4 +#define R_SPARC_DISP16 5 +#define R_SPARC_DISP32 6 +#define R_SPARC_WDISP30 7 +#define R_SPARC_WDISP22 8 +#define R_SPARC_HI22 9 +#define R_SPARC_22 10 +#define R_SPARC_13 11 +#define R_SPARC_LO10 12 +#define R_SPARC_GOT10 13 +#define R_SPARC_GOT13 14 +#define R_SPARC_GOT22 15 +#define R_SPARC_PC10 16 +#define R_SPARC_PC22 17 +#define R_SPARC_WPLT30 18 +#define R_SPARC_COPY 19 +#define R_SPARC_GLOB_DAT 20 +#define R_SPARC_JMP_SLOT 21 +#define R_SPARC_RELATIVE 22 +#define R_SPARC_UA32 23 +#define R_SPARC_PLT32 24 +#define R_SPARC_HIPLT22 25 +#define R_SPARC_LOPLT10 26 +#define R_SPARC_PCPLT32 27 +#define R_SPARC_PCPLT22 28 +#define R_SPARC_PCPLT10 29 +#define R_SPARC_10 30 +#define R_SPARC_11 31 +#define R_SPARC_64 32 +#define R_SPARC_OLO10 33 +#define R_SPARC_WDISP16 40 +#define R_SPARC_WDISP19 41 +#define R_SPARC_7 43 +#define R_SPARC_5 44 +#define R_SPARC_6 45 + +/* Bits present in AT_HWCAP, primarily for Sparc32. */ + +#define HWCAP_SPARC_FLUSH 1 /* CPU supports flush instruction. */ +#define HWCAP_SPARC_STBAR 2 +#define HWCAP_SPARC_SWAP 4 +#define HWCAP_SPARC_MULDIV 8 +#define HWCAP_SPARC_V9 16 +#define HWCAP_SPARC_ULTRA3 32 + +#define CORE_DUMP_USE_REGSET + +/* Format is: + * G0 --> G7 + * O0 --> O7 + * L0 --> L7 + * I0 --> I7 + * PSR, PC, nPC, Y, WIM, TBR + */ +typedef unsigned long elf_greg_t; +#define ELF_NGREG 38 +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct { + union { + unsigned long pr_regs[32]; + double pr_dregs[16]; + } pr_fr; + unsigned long __unused; + unsigned long pr_fsr; + unsigned char pr_qcnt; + unsigned char pr_q_entrysize; + unsigned char pr_en; + unsigned int pr_q[64]; +} elf_fpregset_t; + +#include <asm/mbus.h> + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_SPARC) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_ARCH EM_SPARC +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2MSB + +#define USE_ELF_CORE_DUMP +#ifndef CONFIG_SUN4 +#define ELF_EXEC_PAGESIZE 4096 +#else +#define ELF_EXEC_PAGESIZE 8192 +#endif + + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE (TASK_UNMAPPED_BASE) + +/* This yields a mask that user programs can use to figure out what + instruction set this cpu supports. This can NOT be done in userspace + on Sparc. */ + +/* Sun4c has none of the capabilities, most sun4m's have them all. + * XXX This is gross, set some global variable at boot time. -DaveM + */ +#define ELF_HWCAP ((ARCH_SUN4C_SUN4) ? 0 : \ + (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | \ + HWCAP_SPARC_SWAP | \ + ((srmmu_modtype != Cypress && \ + srmmu_modtype != Cypress_vE && \ + srmmu_modtype != Cypress_vD) ? \ + HWCAP_SPARC_MULDIV : 0))) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM (NULL) + +#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) + +#endif /* !(__ASMSPARC_ELF_H) */ diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h new file mode 100644 index 00000000000..0818a1308f4 --- /dev/null +++ b/arch/sparc/include/asm/elf_64.h @@ -0,0 +1,217 @@ +#ifndef __ASM_SPARC64_ELF_H +#define __ASM_SPARC64_ELF_H + +/* + * ELF register definitions.. + */ + +#include <asm/ptrace.h> +#include <asm/processor.h> +#include <asm/uaccess.h> +#include <asm/spitfire.h> + +/* + * Sparc section types + */ +#define STT_REGISTER 13 + +/* + * Sparc ELF relocation types + */ +#define R_SPARC_NONE 0 +#define R_SPARC_8 1 +#define R_SPARC_16 2 +#define R_SPARC_32 3 +#define R_SPARC_DISP8 4 +#define R_SPARC_DISP16 5 +#define R_SPARC_DISP32 6 +#define R_SPARC_WDISP30 7 +#define R_SPARC_WDISP22 8 +#define R_SPARC_HI22 9 +#define R_SPARC_22 10 +#define R_SPARC_13 11 +#define R_SPARC_LO10 12 +#define R_SPARC_GOT10 13 +#define R_SPARC_GOT13 14 +#define R_SPARC_GOT22 15 +#define R_SPARC_PC10 16 +#define R_SPARC_PC22 17 +#define R_SPARC_WPLT30 18 +#define R_SPARC_COPY 19 +#define R_SPARC_GLOB_DAT 20 +#define R_SPARC_JMP_SLOT 21 +#define R_SPARC_RELATIVE 22 +#define R_SPARC_UA32 23 +#define R_SPARC_PLT32 24 +#define R_SPARC_HIPLT22 25 +#define R_SPARC_LOPLT10 26 +#define R_SPARC_PCPLT32 27 +#define R_SPARC_PCPLT22 28 +#define R_SPARC_PCPLT10 29 +#define R_SPARC_10 30 +#define R_SPARC_11 31 +#define R_SPARC_64 32 +#define R_SPARC_OLO10 33 +#define R_SPARC_WDISP16 40 +#define R_SPARC_WDISP19 41 +#define R_SPARC_7 43 +#define R_SPARC_5 44 +#define R_SPARC_6 45 + +/* Bits present in AT_HWCAP, primarily for Sparc32. */ + +#define HWCAP_SPARC_FLUSH 1 /* CPU supports flush instruction. */ +#define HWCAP_SPARC_STBAR 2 +#define HWCAP_SPARC_SWAP 4 +#define HWCAP_SPARC_MULDIV 8 +#define HWCAP_SPARC_V9 16 +#define HWCAP_SPARC_ULTRA3 32 +#define HWCAP_SPARC_BLKINIT 64 +#define HWCAP_SPARC_N2 128 + +#define CORE_DUMP_USE_REGSET + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_ARCH EM_SPARCV9 +#define ELF_CLASS ELFCLASS64 +#define ELF_DATA ELFDATA2MSB + +/* Format of 64-bit elf_gregset_t is: + * G0 --> G7 + * O0 --> O7 + * L0 --> L7 + * I0 --> I7 + * TSTATE + * TPC + * TNPC + * Y + */ +typedef unsigned long elf_greg_t; +#define ELF_NGREG 36 +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct { + unsigned long pr_regs[32]; + unsigned long pr_fsr; + unsigned long pr_gsr; + unsigned long pr_fprs; +} elf_fpregset_t; + +/* Format of 32-bit elf_gregset_t is: + * G0 --> G7 + * O0 --> O7 + * L0 --> L7 + * I0 --> I7 + * PSR, PC, nPC, Y, WIM, TBR + */ +typedef unsigned int compat_elf_greg_t; +#define COMPAT_ELF_NGREG 38 +typedef compat_elf_greg_t compat_elf_gregset_t[COMPAT_ELF_NGREG]; + +typedef struct { + union { + unsigned int pr_regs[32]; + unsigned long pr_dregs[16]; + } pr_fr; + unsigned int __unused; + unsigned int pr_fsr; + unsigned char pr_qcnt; + unsigned char pr_q_entrysize; + unsigned char pr_en; + unsigned int pr_q[64]; +} compat_elf_fpregset_t; + +/* UltraSparc extensions. Still unused, but will be eventually. */ +typedef struct { + unsigned int pr_type; + unsigned int pr_align; + union { + struct { + union { + unsigned int pr_regs[32]; + unsigned long pr_dregs[16]; + long double pr_qregs[8]; + } pr_xfr; + } pr_v8p; + unsigned int pr_xfsr; + unsigned int pr_fprs; + unsigned int pr_xg[8]; + unsigned int pr_xo[8]; + unsigned long pr_tstate; + unsigned int pr_filler[8]; + } pr_un; +} elf_xregset_t; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == ELF_ARCH) +#define compat_elf_check_arch(x) ((x)->e_machine == EM_SPARC || \ + (x)->e_machine == EM_SPARC32PLUS) +#define compat_start_thread start_thread32 + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE PAGE_SIZE + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE 0x0000010000000000UL +#define COMPAT_ELF_ET_DYN_BASE 0x0000000070000000UL + + +/* This yields a mask that user programs can use to figure out what + instruction set this cpu supports. */ + +/* On Ultra, we support all of the v8 capabilities. */ +static inline unsigned int sparc64_elf_hwcap(void) +{ + unsigned int cap = (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | + HWCAP_SPARC_SWAP | HWCAP_SPARC_MULDIV | + HWCAP_SPARC_V9); + + if (tlb_type == cheetah || tlb_type == cheetah_plus) + cap |= HWCAP_SPARC_ULTRA3; + else if (tlb_type == hypervisor) { + if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 || + sun4v_chip_type == SUN4V_CHIP_NIAGARA2) + cap |= HWCAP_SPARC_BLKINIT; + if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2) + cap |= HWCAP_SPARC_N2; + } + + return cap; +} + +#define ELF_HWCAP sparc64_elf_hwcap(); + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM (NULL) + +#define SET_PERSONALITY(ex, ibcs2) \ +do { unsigned long new_flags = current_thread_info()->flags; \ + new_flags &= _TIF_32BIT; \ + if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ + new_flags |= _TIF_32BIT; \ + else \ + new_flags &= ~_TIF_32BIT; \ + if ((current_thread_info()->flags & _TIF_32BIT) \ + != new_flags) \ + set_thread_flag(TIF_ABI_PENDING); \ + else \ + clear_thread_flag(TIF_ABI_PENDING); \ + /* flush_thread will update pgd cache */ \ + if (ibcs2) \ + set_personality(PER_SVR4); \ + else if (current->personality != PER_LINUX32) \ + set_personality(PER_LINUX); \ +} while (0) + +#endif /* !(__ASM_SPARC64_ELF_H) */ diff --git a/arch/sparc/include/asm/emergency-restart.h b/arch/sparc/include/asm/emergency-restart.h new file mode 100644 index 00000000000..108d8c48e42 --- /dev/null +++ b/arch/sparc/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include <asm-generic/emergency-restart.h> + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/sparc/include/asm/envctrl.h b/arch/sparc/include/asm/envctrl.h new file mode 100644 index 00000000000..624fa7e2da8 --- /dev/null +++ b/arch/sparc/include/asm/envctrl.h @@ -0,0 +1,103 @@ +/* + * + * envctrl.h: Definitions for access to the i2c environment + * monitoring on Ultrasparc systems. + * + * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 2000 Vinh Truong (vinh.truong@eng.sun.com) + * VT - Add all ioctl commands and environment status definitions + * VT - Add application note + */ +#ifndef _SPARC64_ENVCTRL_H +#define _SPARC64_ENVCTRL_H 1 + +#include <linux/ioctl.h> + +/* Application note: + * + * The driver supports 4 operations: open(), close(), ioctl(), read() + * The device name is /dev/envctrl. + * Below is sample usage: + * + * fd = open("/dev/envtrl", O_RDONLY); + * if (ioctl(fd, ENVCTRL_READ_SHUTDOWN_TEMPERATURE, 0) < 0) + * printf("error\n"); + * ret = read(fd, buf, 10); + * close(fd); + * + * Notice in the case of cpu voltage and temperature, the default is + * cpu0. If we need to know the info of cpu1, cpu2, cpu3, we need to + * pass in cpu number in ioctl() last parameter. For example, to + * get the voltage of cpu2: + * + * ioctlbuf[0] = 2; + * if (ioctl(fd, ENVCTRL_READ_CPU_VOLTAGE, ioctlbuf) < 0) + * printf("error\n"); + * ret = read(fd, buf, 10); + * + * All the return values are in ascii. So check read return value + * and do appropriate conversions in your application. + */ + +/* IOCTL commands */ + +/* Note: these commands reflect possible monitor features. + * Some boards choose to support some of the features only. + */ +#define ENVCTRL_RD_CPU_TEMPERATURE _IOR('p', 0x40, int) +#define ENVCTRL_RD_CPU_VOLTAGE _IOR('p', 0x41, int) +#define ENVCTRL_RD_FAN_STATUS _IOR('p', 0x42, int) +#define ENVCTRL_RD_WARNING_TEMPERATURE _IOR('p', 0x43, int) +#define ENVCTRL_RD_SHUTDOWN_TEMPERATURE _IOR('p', 0x44, int) +#define ENVCTRL_RD_VOLTAGE_STATUS _IOR('p', 0x45, int) +#define ENVCTRL_RD_SCSI_TEMPERATURE _IOR('p', 0x46, int) +#define ENVCTRL_RD_ETHERNET_TEMPERATURE _IOR('p', 0x47, int) +#define ENVCTRL_RD_MTHRBD_TEMPERATURE _IOR('p', 0x48, int) + +#define ENVCTRL_RD_GLOBALADDRESS _IOR('p', 0x49, int) + +/* Read return values for a voltage status request. */ +#define ENVCTRL_VOLTAGE_POWERSUPPLY_GOOD 0x01 +#define ENVCTRL_VOLTAGE_BAD 0x02 +#define ENVCTRL_POWERSUPPLY_BAD 0x03 +#define ENVCTRL_VOLTAGE_POWERSUPPLY_BAD 0x04 + +/* Read return values for a fan status request. + * A failure match means either the fan fails or + * the fan is not connected. Some boards have optional + * connectors to connect extra fans. + * + * There are maximum 8 monitor fans. Some are cpu fans + * some are system fans. The mask below only indicates + * fan by order number. + * Below is a sample application: + * + * if (ioctl(fd, ENVCTRL_READ_FAN_STATUS, 0) < 0) { + * printf("ioctl fan failed\n"); + * } + * if (read(fd, rslt, 1) <= 0) { + * printf("error or fan not monitored\n"); + * } else { + * if (rslt[0] == ENVCTRL_ALL_FANS_GOOD) { + * printf("all fans good\n"); + * } else if (rslt[0] == ENVCTRL_ALL_FANS_BAD) { + * printf("all fans bad\n"); + * } else { + * if (rslt[0] & ENVCTRL_FAN0_FAILURE_MASK) { + * printf("fan 0 failed or not connected\n"); + * } + * ...... + */ + +#define ENVCTRL_ALL_FANS_GOOD 0x00 +#define ENVCTRL_FAN0_FAILURE_MASK 0x01 +#define ENVCTRL_FAN1_FAILURE_MASK 0x02 +#define ENVCTRL_FAN2_FAILURE_MASK 0x04 +#define ENVCTRL_FAN3_FAILURE_MASK 0x08 +#define ENVCTRL_FAN4_FAILURE_MASK 0x10 +#define ENVCTRL_FAN5_FAILURE_MASK 0x20 +#define ENVCTRL_FAN6_FAILURE_MASK 0x40 +#define ENVCTRL_FAN7_FAILURE_MASK 0x80 +#define ENVCTRL_ALL_FANS_BAD 0xFF + +#endif /* !(_SPARC64_ENVCTRL_H) */ diff --git a/arch/sparc/include/asm/errno.h b/arch/sparc/include/asm/errno.h new file mode 100644 index 00000000000..a9ef172977d --- /dev/null +++ b/arch/sparc/include/asm/errno.h @@ -0,0 +1,113 @@ +#ifndef _SPARC_ERRNO_H +#define _SPARC_ERRNO_H + +/* These match the SunOS error numbering scheme. */ + +#include <asm-generic/errno-base.h> + +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define EINPROGRESS 36 /* Operation now in progress */ +#define EALREADY 37 /* Operation already in progress */ +#define ENOTSOCK 38 /* Socket operation on non-socket */ +#define EDESTADDRREQ 39 /* Destination address required */ +#define EMSGSIZE 40 /* Message too long */ +#define EPROTOTYPE 41 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 42 /* Protocol not available */ +#define EPROTONOSUPPORT 43 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 44 /* Socket type not supported */ +#define EOPNOTSUPP 45 /* Op not supported on transport endpoint */ +#define EPFNOSUPPORT 46 /* Protocol family not supported */ +#define EAFNOSUPPORT 47 /* Address family not supported by protocol */ +#define EADDRINUSE 48 /* Address already in use */ +#define EADDRNOTAVAIL 49 /* Cannot assign requested address */ +#define ENETDOWN 50 /* Network is down */ +#define ENETUNREACH 51 /* Network is unreachable */ +#define ENETRESET 52 /* Net dropped connection because of reset */ +#define ECONNABORTED 53 /* Software caused connection abort */ +#define ECONNRESET 54 /* Connection reset by peer */ +#define ENOBUFS 55 /* No buffer space available */ +#define EISCONN 56 /* Transport endpoint is already connected */ +#define ENOTCONN 57 /* Transport endpoint is not connected */ +#define ESHUTDOWN 58 /* No send after transport endpoint shutdown */ +#define ETOOMANYREFS 59 /* Too many references: cannot splice */ +#define ETIMEDOUT 60 /* Connection timed out */ +#define ECONNREFUSED 61 /* Connection refused */ +#define ELOOP 62 /* Too many symbolic links encountered */ +#define ENAMETOOLONG 63 /* File name too long */ +#define EHOSTDOWN 64 /* Host is down */ +#define EHOSTUNREACH 65 /* No route to host */ +#define ENOTEMPTY 66 /* Directory not empty */ +#define EPROCLIM 67 /* SUNOS: Too many processes */ +#define EUSERS 68 /* Too many users */ +#define EDQUOT 69 /* Quota exceeded */ +#define ESTALE 70 /* Stale NFS file handle */ +#define EREMOTE 71 /* Object is remote */ +#define ENOSTR 72 /* Device not a stream */ +#define ETIME 73 /* Timer expired */ +#define ENOSR 74 /* Out of streams resources */ +#define ENOMSG 75 /* No message of desired type */ +#define EBADMSG 76 /* Not a data message */ +#define EIDRM 77 /* Identifier removed */ +#define EDEADLK 78 /* Resource deadlock would occur */ +#define ENOLCK 79 /* No record locks available */ +#define ENONET 80 /* Machine is not on the network */ +#define ERREMOTE 81 /* SunOS: Too many lvls of remote in path */ +#define ENOLINK 82 /* Link has been severed */ +#define EADV 83 /* Advertise error */ +#define ESRMNT 84 /* Srmount error */ +#define ECOMM 85 /* Communication error on send */ +#define EPROTO 86 /* Protocol error */ +#define EMULTIHOP 87 /* Multihop attempted */ +#define EDOTDOT 88 /* RFS specific error */ +#define EREMCHG 89 /* Remote address changed */ +#define ENOSYS 90 /* Function not implemented */ + +/* The rest have no SunOS equivalent. */ +#define ESTRPIPE 91 /* Streams pipe error */ +#define EOVERFLOW 92 /* Value too large for defined data type */ +#define EBADFD 93 /* File descriptor in bad state */ +#define ECHRNG 94 /* Channel number out of range */ +#define EL2NSYNC 95 /* Level 2 not synchronized */ +#define EL3HLT 96 /* Level 3 halted */ +#define EL3RST 97 /* Level 3 reset */ +#define ELNRNG 98 /* Link number out of range */ +#define EUNATCH 99 /* Protocol driver not attached */ +#define ENOCSI 100 /* No CSI structure available */ +#define EL2HLT 101 /* Level 2 halted */ +#define EBADE 102 /* Invalid exchange */ +#define EBADR 103 /* Invalid request descriptor */ +#define EXFULL 104 /* Exchange full */ +#define ENOANO 105 /* No anode */ +#define EBADRQC 106 /* Invalid request code */ +#define EBADSLT 107 /* Invalid slot */ +#define EDEADLOCK 108 /* File locking deadlock error */ +#define EBFONT 109 /* Bad font file format */ +#define ELIBEXEC 110 /* Cannot exec a shared library directly */ +#define ENODATA 111 /* No data available */ +#define ELIBBAD 112 /* Accessing a corrupted shared library */ +#define ENOPKG 113 /* Package not installed */ +#define ELIBACC 114 /* Can not access a needed shared library */ +#define ENOTUNIQ 115 /* Name not unique on network */ +#define ERESTART 116 /* Interrupted syscall should be restarted */ +#define EUCLEAN 117 /* Structure needs cleaning */ +#define ENOTNAM 118 /* Not a XENIX named type file */ +#define ENAVAIL 119 /* No XENIX semaphores available */ +#define EISNAM 120 /* Is a named type file */ +#define EREMOTEIO 121 /* Remote I/O error */ +#define EILSEQ 122 /* Illegal byte sequence */ +#define ELIBMAX 123 /* Atmpt to link in too many shared libs */ +#define ELIBSCN 124 /* .lib section in a.out corrupted */ + +#define ENOMEDIUM 125 /* No medium found */ +#define EMEDIUMTYPE 126 /* Wrong medium type */ +#define ECANCELED 127 /* Operation Cancelled */ +#define ENOKEY 128 /* Required key not available */ +#define EKEYEXPIRED 129 /* Key has expired */ +#define EKEYREVOKED 130 /* Key has been revoked */ +#define EKEYREJECTED 131 /* Key was rejected by service */ + +/* for robust mutexes */ +#define EOWNERDEAD 132 /* Owner died */ +#define ENOTRECOVERABLE 133 /* State not recoverable */ + +#endif diff --git a/arch/sparc/include/asm/estate.h b/arch/sparc/include/asm/estate.h new file mode 100644 index 00000000000..520c08560d1 --- /dev/null +++ b/arch/sparc/include/asm/estate.h @@ -0,0 +1,49 @@ +#ifndef _SPARC64_ESTATE_H +#define _SPARC64_ESTATE_H + +/* UltraSPARC-III E-cache Error Enable */ +#define ESTATE_ERROR_FMT 0x0000000000040000 /* Force MTAG ECC */ +#define ESTATE_ERROR_FMESS 0x000000000003c000 /* Forced MTAG ECC val */ +#define ESTATE_ERROR_FMD 0x0000000000002000 /* Force DATA ECC */ +#define ESTATE_ERROR_FDECC 0x0000000000001ff0 /* Forced DATA ECC val */ +#define ESTATE_ERROR_UCEEN 0x0000000000000008 /* See below */ +#define ESTATE_ERROR_NCEEN 0x0000000000000002 /* See below */ +#define ESTATE_ERROR_CEEN 0x0000000000000001 /* See below */ + +/* UCEEN enables the fast_ECC_error trap for: 1) software correctable E-cache + * errors 2) uncorrectable E-cache errors. Such events only occur on reads + * of the E-cache by the local processor for: 1) data loads 2) instruction + * fetches 3) atomic operations. Such events _cannot_ occur for: 1) merge + * 2) writeback 2) copyout. The AFSR bits associated with these traps are + * UCC and UCU. + */ + +/* NCEEN enables instruction_access_error, data_access_error, and ECC_error traps + * for uncorrectable ECC errors and system errors. + * + * Uncorrectable system bus data error or MTAG ECC error, system bus TimeOUT, + * or system bus BusERR: + * 1) As the result of an instruction fetch, will generate instruction_access_error + * 2) As the result of a load etc. will generate data_access_error. + * 3) As the result of store merge completion, writeback, or copyout will + * generate a disrupting ECC_error trap. + * 4) As the result of such errors on instruction vector fetch can generate any + * of the 3 trap types. + * + * The AFSR bits associated with these traps are EMU, EDU, WDU, CPU, IVU, UE, + * BERR, and TO. + */ + +/* CEEN enables the ECC_error trap for hardware corrected ECC errors. System bus + * reads resulting in a hardware corrected data or MTAG ECC error will generate an + * ECC_error disrupting trap with this bit enabled. + * + * This same trap will also be generated when a hardware corrected ECC error results + * during store merge, writeback, and copyout operations. + */ + +/* In general, if the trap enable bits above are disabled the AFSR bits will still + * log the events even though the trap will not be generated by the processor. + */ + +#endif /* _SPARC64_ESTATE_H */ diff --git a/arch/sparc/include/asm/fb.h b/arch/sparc/include/asm/fb.h new file mode 100644 index 00000000000..b83e4472965 --- /dev/null +++ b/arch/sparc/include/asm/fb.h @@ -0,0 +1,29 @@ +#ifndef _SPARC_FB_H_ +#define _SPARC_FB_H_ +#include <linux/fb.h> +#include <linux/fs.h> +#include <asm/page.h> +#include <asm/prom.h> + +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ +#ifdef CONFIG_SPARC64 + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); +#endif +} + +static inline int fb_is_primary_device(struct fb_info *info) +{ + struct device *dev = info->device; + struct device_node *node; + + node = dev->archdata.prom_node; + if (node && + node == of_console_device) + return 1; + + return 0; +} + +#endif /* _SPARC_FB_H_ */ diff --git a/arch/sparc/include/asm/fbio.h b/arch/sparc/include/asm/fbio.h new file mode 100644 index 00000000000..b9215a0907d --- /dev/null +++ b/arch/sparc/include/asm/fbio.h @@ -0,0 +1,330 @@ +#ifndef __LINUX_FBIO_H +#define __LINUX_FBIO_H + +#include <linux/compiler.h> +#include <linux/types.h> + +/* Constants used for fbio SunOS compatibility */ +/* (C) 1996 Miguel de Icaza */ + +/* Frame buffer types */ +#define FBTYPE_NOTYPE -1 +#define FBTYPE_SUN1BW 0 /* mono */ +#define FBTYPE_SUN1COLOR 1 +#define FBTYPE_SUN2BW 2 +#define FBTYPE_SUN2COLOR 3 +#define FBTYPE_SUN2GP 4 +#define FBTYPE_SUN5COLOR 5 +#define FBTYPE_SUN3COLOR 6 +#define FBTYPE_MEMCOLOR 7 +#define FBTYPE_SUN4COLOR 8 + +#define FBTYPE_NOTSUN1 9 +#define FBTYPE_NOTSUN2 10 +#define FBTYPE_NOTSUN3 11 + +#define FBTYPE_SUNFAST_COLOR 12 /* cg6 */ +#define FBTYPE_SUNROP_COLOR 13 +#define FBTYPE_SUNFB_VIDEO 14 +#define FBTYPE_SUNGIFB 15 +#define FBTYPE_SUNGPLAS 16 +#define FBTYPE_SUNGP3 17 +#define FBTYPE_SUNGT 18 +#define FBTYPE_SUNLEO 19 /* zx Leo card */ +#define FBTYPE_MDICOLOR 20 /* cg14 */ +#define FBTYPE_TCXCOLOR 21 /* SUNW,tcx card */ + +#define FBTYPE_LASTPLUSONE 21 /* This is not last + 1 in fact... */ + +/* Does not seem to be listed in the Sun file either */ +#define FBTYPE_CREATOR 22 +#define FBTYPE_PCI_IGA1682 23 +#define FBTYPE_P9100COLOR 24 + +#define FBTYPE_PCI_GENERIC 1000 +#define FBTYPE_PCI_MACH64 1001 + +/* fbio ioctls */ +/* Returned by FBIOGTYPE */ +struct fbtype { + int fb_type; /* fb type, see above */ + int fb_height; /* pixels */ + int fb_width; /* pixels */ + int fb_depth; + int fb_cmsize; /* color map entries */ + int fb_size; /* fb size in bytes */ +}; +#define FBIOGTYPE _IOR('F', 0, struct fbtype) + +struct fbcmap { + int index; /* first element (0 origin) */ + int count; + unsigned char __user *red; + unsigned char __user *green; + unsigned char __user *blue; +}; + +#ifdef __KERNEL__ +#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap) +#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap) +#else +#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap) +#define FBIOGETCMAP _IOW('F', 4, struct fbcmap) +#endif + +/* # of device specific values */ +#define FB_ATTR_NDEVSPECIFIC 8 +/* # of possible emulations */ +#define FB_ATTR_NEMUTYPES 4 + +struct fbsattr { + int flags; + int emu_type; /* -1 if none */ + int dev_specific[FB_ATTR_NDEVSPECIFIC]; +}; + +struct fbgattr { + int real_type; /* real frame buffer type */ + int owner; /* unknown */ + struct fbtype fbtype; /* real frame buffer fbtype */ + struct fbsattr sattr; + int emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */ +}; +#define FBIOSATTR _IOW('F', 5, struct fbgattr) /* Unsupported: */ +#define FBIOGATTR _IOR('F', 6, struct fbgattr) /* supported */ + +#define FBIOSVIDEO _IOW('F', 7, int) +#define FBIOGVIDEO _IOR('F', 8, int) + +struct fbcursor { + short set; /* what to set, choose from the list above */ + short enable; /* cursor on/off */ + struct fbcurpos pos; /* cursor position */ + struct fbcurpos hot; /* cursor hot spot */ + struct fbcmap cmap; /* color map info */ + struct fbcurpos size; /* cursor bit map size */ + char __user *image; /* cursor image bits */ + char __user *mask; /* cursor mask bits */ +}; + +/* set/get cursor attributes/shape */ +#define FBIOSCURSOR _IOW('F', 24, struct fbcursor) +#define FBIOGCURSOR _IOWR('F', 25, struct fbcursor) + +/* set/get cursor position */ +#define FBIOSCURPOS _IOW('F', 26, struct fbcurpos) +#define FBIOGCURPOS _IOW('F', 27, struct fbcurpos) + +/* get max cursor size */ +#define FBIOGCURMAX _IOR('F', 28, struct fbcurpos) + +/* wid manipulation */ +struct fb_wid_alloc { +#define FB_WID_SHARED_8 0 +#define FB_WID_SHARED_24 1 +#define FB_WID_DBL_8 2 +#define FB_WID_DBL_24 3 + __u32 wa_type; + __s32 wa_index; /* Set on return */ + __u32 wa_count; +}; +struct fb_wid_item { + __u32 wi_type; + __s32 wi_index; + __u32 wi_attrs; + __u32 wi_values[32]; +}; +struct fb_wid_list { + __u32 wl_flags; + __u32 wl_count; + struct fb_wid_item *wl_list; +}; + +#define FBIO_WID_ALLOC _IOWR('F', 30, struct fb_wid_alloc) +#define FBIO_WID_FREE _IOW('F', 31, struct fb_wid_alloc) +#define FBIO_WID_PUT _IOW('F', 32, struct fb_wid_list) +#define FBIO_WID_GET _IOWR('F', 33, struct fb_wid_list) + +/* Creator ioctls */ +#define FFB_IOCTL ('F'<<8) +#define FFB_SYS_INFO (FFB_IOCTL|80) +#define FFB_CLUTREAD (FFB_IOCTL|81) +#define FFB_CLUTPOST (FFB_IOCTL|82) +#define FFB_SETDIAGMODE (FFB_IOCTL|83) +#define FFB_GETMONITORID (FFB_IOCTL|84) +#define FFB_GETVIDEOMODE (FFB_IOCTL|85) +#define FFB_SETVIDEOMODE (FFB_IOCTL|86) +#define FFB_SETSERVER (FFB_IOCTL|87) +#define FFB_SETOVCTL (FFB_IOCTL|88) +#define FFB_GETOVCTL (FFB_IOCTL|89) +#define FFB_GETSAXNUM (FFB_IOCTL|90) +#define FFB_FBDEBUG (FFB_IOCTL|91) + +/* Cg14 ioctls */ +#define MDI_IOCTL ('M'<<8) +#define MDI_RESET (MDI_IOCTL|1) +#define MDI_GET_CFGINFO (MDI_IOCTL|2) +#define MDI_SET_PIXELMODE (MDI_IOCTL|3) +# define MDI_32_PIX 32 +# define MDI_16_PIX 16 +# define MDI_8_PIX 8 + +struct mdi_cfginfo { + int mdi_ncluts; /* Number of implemented CLUTs in this MDI */ + int mdi_type; /* FBTYPE name */ + int mdi_height; /* height */ + int mdi_width; /* widht */ + int mdi_size; /* available ram */ + int mdi_mode; /* 8bpp, 16bpp or 32bpp */ + int mdi_pixfreq; /* pixel clock (from PROM) */ +}; + +/* SparcLinux specific ioctl for the MDI, should be replaced for + * the SET_XLUT/SET_CLUTn ioctls instead + */ +#define MDI_CLEAR_XLUT (MDI_IOCTL|9) + +/* leo & ffb ioctls */ +struct fb_clut_alloc { + __u32 clutid; /* Set on return */ + __u32 flag; + __u32 index; +}; + +struct fb_clut { +#define FB_CLUT_WAIT 0x00000001 /* Not yet implemented */ + __u32 flag; + __u32 clutid; + __u32 offset; + __u32 count; + char * red; + char * green; + char * blue; +}; + +struct fb_clut32 { + __u32 flag; + __u32 clutid; + __u32 offset; + __u32 count; + __u32 red; + __u32 green; + __u32 blue; +}; + +#define LEO_CLUTALLOC _IOWR('L', 53, struct fb_clut_alloc) +#define LEO_CLUTFREE _IOW('L', 54, struct fb_clut_alloc) +#define LEO_CLUTREAD _IOW('L', 55, struct fb_clut) +#define LEO_CLUTPOST _IOW('L', 56, struct fb_clut) +#define LEO_SETGAMMA _IOW('L', 68, int) /* Not yet implemented */ +#define LEO_GETGAMMA _IOR('L', 69, int) /* Not yet implemented */ + +#ifdef __KERNEL__ +/* Addresses on the fd of a cgsix that are mappable */ +#define CG6_FBC 0x70000000 +#define CG6_TEC 0x70001000 +#define CG6_BTREGS 0x70002000 +#define CG6_FHC 0x70004000 +#define CG6_THC 0x70005000 +#define CG6_ROM 0x70006000 +#define CG6_RAM 0x70016000 +#define CG6_DHC 0x80000000 + +#define CG3_MMAP_OFFSET 0x4000000 + +/* Addresses on the fd of a tcx that are mappable */ +#define TCX_RAM8BIT 0x00000000 +#define TCX_RAM24BIT 0x01000000 +#define TCX_UNK3 0x10000000 +#define TCX_UNK4 0x20000000 +#define TCX_CONTROLPLANE 0x28000000 +#define TCX_UNK6 0x30000000 +#define TCX_UNK7 0x38000000 +#define TCX_TEC 0x70000000 +#define TCX_BTREGS 0x70002000 +#define TCX_THC 0x70004000 +#define TCX_DHC 0x70008000 +#define TCX_ALT 0x7000a000 +#define TCX_SYNC 0x7000e000 +#define TCX_UNK2 0x70010000 + +/* CG14 definitions */ + +/* Offsets into the OBIO space: */ +#define CG14_REGS 0 /* registers */ +#define CG14_CURSORREGS 0x1000 /* cursor registers */ +#define CG14_DACREGS 0x2000 /* DAC registers */ +#define CG14_XLUT 0x3000 /* X Look Up Table -- ??? */ +#define CG14_CLUT1 0x4000 /* Color Look Up Table */ +#define CG14_CLUT2 0x5000 /* Color Look Up Table */ +#define CG14_CLUT3 0x6000 /* Color Look Up Table */ +#define CG14_AUTO 0xf000 + +#endif /* KERNEL */ + +/* These are exported to userland for applications to use */ +/* Mappable offsets for the cg14: control registers */ +#define MDI_DIRECT_MAP 0x10000000 +#define MDI_CTLREG_MAP 0x20000000 +#define MDI_CURSOR_MAP 0x30000000 +#define MDI_SHDW_VRT_MAP 0x40000000 + +/* Mappable offsets for the cg14: frame buffer resolutions */ +/* 32 bits */ +#define MDI_CHUNKY_XBGR_MAP 0x50000000 +#define MDI_CHUNKY_BGR_MAP 0x60000000 + +/* 16 bits */ +#define MDI_PLANAR_X16_MAP 0x70000000 +#define MDI_PLANAR_C16_MAP 0x80000000 + +/* 8 bit is done as CG3 MMAP offset */ +/* 32 bits, planar */ +#define MDI_PLANAR_X32_MAP 0x90000000 +#define MDI_PLANAR_B32_MAP 0xa0000000 +#define MDI_PLANAR_G32_MAP 0xb0000000 +#define MDI_PLANAR_R32_MAP 0xc0000000 + +/* Mappable offsets on leo */ +#define LEO_SS0_MAP 0x00000000 +#define LEO_LC_SS0_USR_MAP 0x00800000 +#define LEO_LD_SS0_MAP 0x00801000 +#define LEO_LX_CURSOR_MAP 0x00802000 +#define LEO_SS1_MAP 0x00803000 +#define LEO_LC_SS1_USR_MAP 0x01003000 +#define LEO_LD_SS1_MAP 0x01004000 +#define LEO_UNK_MAP 0x01005000 +#define LEO_LX_KRN_MAP 0x01006000 +#define LEO_LC_SS0_KRN_MAP 0x01007000 +#define LEO_LC_SS1_KRN_MAP 0x01008000 +#define LEO_LD_GBL_MAP 0x01009000 +#define LEO_UNK2_MAP 0x0100a000 + +#ifdef __KERNEL__ +struct fbcmap32 { + int index; /* first element (0 origin) */ + int count; + u32 red; + u32 green; + u32 blue; +}; + +#define FBIOPUTCMAP32 _IOW('F', 3, struct fbcmap32) +#define FBIOGETCMAP32 _IOW('F', 4, struct fbcmap32) + +struct fbcursor32 { + short set; /* what to set, choose from the list above */ + short enable; /* cursor on/off */ + struct fbcurpos pos; /* cursor position */ + struct fbcurpos hot; /* cursor hot spot */ + struct fbcmap32 cmap; /* color map info */ + struct fbcurpos size; /* cursor bit map size */ + u32 image; /* cursor image bits */ + u32 mask; /* cursor mask bits */ +}; + +#define FBIOSCURSOR32 _IOW('F', 24, struct fbcursor32) +#define FBIOGCURSOR32 _IOW('F', 25, struct fbcursor32) +#endif + +#endif /* __LINUX_FBIO_H */ diff --git a/arch/sparc/include/asm/fcntl.h b/arch/sparc/include/asm/fcntl.h new file mode 100644 index 00000000000..d4d9c9d852c --- /dev/null +++ b/arch/sparc/include/asm/fcntl.h @@ -0,0 +1,40 @@ +#ifndef _SPARC_FCNTL_H +#define _SPARC_FCNTL_H + +/* open/fcntl - O_SYNC is only implemented on blocks devices and on files + located on an ext2 file system */ +#define O_APPEND 0x0008 +#define FASYNC 0x0040 /* fcntl, for BSD compatibility */ +#define O_CREAT 0x0200 /* not fcntl */ +#define O_TRUNC 0x0400 /* not fcntl */ +#define O_EXCL 0x0800 /* not fcntl */ +#define O_SYNC 0x2000 +#define O_NONBLOCK 0x4000 +#if defined(__sparc__) && defined(__arch64__) +#define O_NDELAY 0x0004 +#else +#define O_NDELAY (0x0004 | O_NONBLOCK) +#endif +#define O_NOCTTY 0x8000 /* not fcntl */ +#define O_LARGEFILE 0x40000 +#define O_DIRECT 0x100000 /* direct disk access hint */ +#define O_NOATIME 0x200000 +#define O_CLOEXEC 0x400000 + +#define F_GETOWN 5 /* for sockets. */ +#define F_SETOWN 6 /* for sockets. */ +#define F_GETLK 7 +#define F_SETLK 8 +#define F_SETLKW 9 + +/* for posix fcntl() and lockf() */ +#define F_RDLCK 1 +#define F_WRLCK 2 +#define F_UNLCK 3 + +#define __ARCH_FLOCK_PAD short __unused; +#define __ARCH_FLOCK64_PAD short __unused; + +#include <asm-generic/fcntl.h> + +#endif diff --git a/arch/sparc/include/asm/fhc.h b/arch/sparc/include/asm/fhc.h new file mode 100644 index 00000000000..788cbc46a11 --- /dev/null +++ b/arch/sparc/include/asm/fhc.h @@ -0,0 +1,121 @@ +/* + * fhc.h: Structures for central/fhc pseudo driver on Sunfire/Starfire/Wildfire. + * + * Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com) + */ + +#ifndef _SPARC64_FHC_H +#define _SPARC64_FHC_H + +#include <linux/timer.h> + +#include <asm/oplib.h> +#include <asm/prom.h> +#include <asm/upa.h> + +struct linux_fhc; + +/* Clock board register offsets. */ +#define CLOCK_CTRL 0x00UL /* Main control */ +#define CLOCK_STAT1 0x10UL /* Status one */ +#define CLOCK_STAT2 0x20UL /* Status two */ +#define CLOCK_PWRSTAT 0x30UL /* Power status */ +#define CLOCK_PWRPRES 0x40UL /* Power presence */ +#define CLOCK_TEMP 0x50UL /* Temperature */ +#define CLOCK_IRQDIAG 0x60UL /* IRQ diagnostics */ +#define CLOCK_PWRSTAT2 0x70UL /* Power status two */ + +#define CLOCK_CTRL_LLED 0x04 /* Left LED, 0 == on */ +#define CLOCK_CTRL_MLED 0x02 /* Mid LED, 1 == on */ +#define CLOCK_CTRL_RLED 0x01 /* RIght LED, 1 == on */ + +struct linux_central { + struct linux_fhc *child; + unsigned long cfreg; + unsigned long clkregs; + unsigned long clkver; + int slots; + struct device_node *prom_node; + + struct linux_prom_ranges central_ranges[PROMREG_MAX]; + int num_central_ranges; +}; + +/* Firehose controller register offsets */ +struct fhc_regs { + unsigned long pregs; /* FHC internal regs */ +#define FHC_PREGS_ID 0x00UL /* FHC ID */ +#define FHC_ID_VERS 0xf0000000 /* Version of this FHC */ +#define FHC_ID_PARTID 0x0ffff000 /* Part ID code (0x0f9f == FHC) */ +#define FHC_ID_MANUF 0x0000007e /* Manufacturer (0x3e == SUN's JEDEC)*/ +#define FHC_ID_RESV 0x00000001 /* Read as one */ +#define FHC_PREGS_RCS 0x10UL /* FHC Reset Control/Status Register */ +#define FHC_RCS_POR 0x80000000 /* Last reset was a power cycle */ +#define FHC_RCS_SPOR 0x40000000 /* Last reset was sw power on reset */ +#define FHC_RCS_SXIR 0x20000000 /* Last reset was sw XIR reset */ +#define FHC_RCS_BPOR 0x10000000 /* Last reset was due to POR button */ +#define FHC_RCS_BXIR 0x08000000 /* Last reset was due to XIR button */ +#define FHC_RCS_WEVENT 0x04000000 /* CPU reset was due to wakeup event */ +#define FHC_RCS_CFATAL 0x02000000 /* Centerplane Fatal Error signalled */ +#define FHC_RCS_FENAB 0x01000000 /* Fatal errors elicit system reset */ +#define FHC_PREGS_CTRL 0x20UL /* FHC Control Register */ +#define FHC_CONTROL_ICS 0x00100000 /* Ignore Centerplane Signals */ +#define FHC_CONTROL_FRST 0x00080000 /* Fatal Error Reset Enable */ +#define FHC_CONTROL_LFAT 0x00040000 /* AC/DC signalled a local error */ +#define FHC_CONTROL_SLINE 0x00010000 /* Firmware Synchronization Line */ +#define FHC_CONTROL_DCD 0x00008000 /* DC-->DC Converter Disable */ +#define FHC_CONTROL_POFF 0x00004000 /* AC/DC Controller PLL Disable */ +#define FHC_CONTROL_FOFF 0x00002000 /* FHC Controller PLL Disable */ +#define FHC_CONTROL_AOFF 0x00001000 /* CPU A SRAM/SBD Low Power Mode */ +#define FHC_CONTROL_BOFF 0x00000800 /* CPU B SRAM/SBD Low Power Mode */ +#define FHC_CONTROL_PSOFF 0x00000400 /* Turns off this FHC's power supply */ +#define FHC_CONTROL_IXIST 0x00000200 /* 0=FHC tells clock board it exists */ +#define FHC_CONTROL_XMSTR 0x00000100 /* 1=Causes this FHC to be XIR master*/ +#define FHC_CONTROL_LLED 0x00000040 /* 0=Left LED ON */ +#define FHC_CONTROL_MLED 0x00000020 /* 1=Middle LED ON */ +#define FHC_CONTROL_RLED 0x00000010 /* 1=Right LED */ +#define FHC_CONTROL_BPINS 0x00000003 /* Spare Bidirectional Pins */ +#define FHC_PREGS_BSR 0x30UL /* FHC Board Status Register */ +#define FHC_BSR_DA64 0x00040000 /* Port A: 0=128bit 1=64bit data path */ +#define FHC_BSR_DB64 0x00020000 /* Port B: 0=128bit 1=64bit data path */ +#define FHC_BSR_BID 0x0001e000 /* Board ID */ +#define FHC_BSR_SA 0x00001c00 /* Port A UPA Speed (from the pins) */ +#define FHC_BSR_SB 0x00000380 /* Port B UPA Speed (from the pins) */ +#define FHC_BSR_NDIAG 0x00000040 /* Not in Diag Mode */ +#define FHC_BSR_NTBED 0x00000020 /* Not in TestBED Mode */ +#define FHC_BSR_NIA 0x0000001c /* Jumper, bit 18 in PROM space */ +#define FHC_BSR_SI 0x00000001 /* Spare input pin value */ +#define FHC_PREGS_ECC 0x40UL /* FHC ECC Control Register (16 bits) */ +#define FHC_PREGS_JCTRL 0xf0UL /* FHC JTAG Control Register */ +#define FHC_JTAG_CTRL_MENAB 0x80000000 /* Indicates this is JTAG Master */ +#define FHC_JTAG_CTRL_MNONE 0x40000000 /* Indicates no JTAG Master present */ +#define FHC_PREGS_JCMD 0x100UL /* FHC JTAG Command Register */ + unsigned long ireg; /* FHC IGN reg */ +#define FHC_IREG_IGN 0x00UL /* This FHC's IGN */ + unsigned long ffregs; /* FHC fanfail regs */ +#define FHC_FFREGS_IMAP 0x00UL /* FHC Fanfail IMAP */ +#define FHC_FFREGS_ICLR 0x10UL /* FHC Fanfail ICLR */ + unsigned long sregs; /* FHC system regs */ +#define FHC_SREGS_IMAP 0x00UL /* FHC System IMAP */ +#define FHC_SREGS_ICLR 0x10UL /* FHC System ICLR */ + unsigned long uregs; /* FHC uart regs */ +#define FHC_UREGS_IMAP 0x00UL /* FHC Uart IMAP */ +#define FHC_UREGS_ICLR 0x10UL /* FHC Uart ICLR */ + unsigned long tregs; /* FHC TOD regs */ +#define FHC_TREGS_IMAP 0x00UL /* FHC TOD IMAP */ +#define FHC_TREGS_ICLR 0x10UL /* FHC TOD ICLR */ +}; + +struct linux_fhc { + struct linux_fhc *next; + struct linux_central *parent; /* NULL if not central FHC */ + struct fhc_regs fhc_regs; + int board; + int jtag_master; + struct device_node *prom_node; + + struct linux_prom_ranges fhc_ranges[PROMREG_MAX]; + int num_fhc_ranges; +}; + +#endif /* !(_SPARC64_FHC_H) */ diff --git a/arch/sparc/include/asm/fixmap.h b/arch/sparc/include/asm/fixmap.h new file mode 100644 index 00000000000..f18fc0755ad --- /dev/null +++ b/arch/sparc/include/asm/fixmap.h @@ -0,0 +1,110 @@ +/* + * fixmap.h: compile-time virtual memory allocation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998 Ingo Molnar + * + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 + */ + +#ifndef _ASM_FIXMAP_H +#define _ASM_FIXMAP_H + +#include <linux/kernel.h> +#include <asm/page.h> +#ifdef CONFIG_HIGHMEM +#include <linux/threads.h> +#include <asm/kmap_types.h> +#endif + +/* + * Here we define all the compile-time 'special' virtual + * addresses. The point is to have a constant address at + * compile time, but to set the physical address only + * in the boot process. We allocate these special addresses + * from the top of unused virtual memory (0xfd000000 - 1 page) backwards. + * Also this lets us do fail-safe vmalloc(), we + * can guarantee that these special addresses and + * vmalloc()-ed addresses never overlap. + * + * these 'compile-time allocated' memory buffers are + * fixed-size 4k pages. (or larger if used with an increment + * highger than 1) use fixmap_set(idx,phys) to associate + * physical memory with fixmap indices. + * + * TLB entries of such buffers will not be flushed across + * task switches. + */ + +/* + * on UP currently we will have no trace of the fixmap mechanism, + * no page table allocations, etc. This might change in the + * future, say framebuffers for the console driver(s) could be + * fix-mapped? + */ +enum fixed_addresses { + FIX_HOLE, +#ifdef CONFIG_HIGHMEM + FIX_KMAP_BEGIN, + FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, +#endif + __end_of_fixed_addresses +}; + +extern void __set_fixmap (enum fixed_addresses idx, + unsigned long phys, pgprot_t flags); + +#define set_fixmap(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL) +/* + * Some hardware wants to get fixmapped without caching. + */ +#define set_fixmap_nocache(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE) +/* + * used by vmalloc.c. + * + * Leave one empty page between IO pages at 0xfd000000 and + * the start of the fixmap. + */ +#define FIXADDR_TOP (0xfcfff000UL) +#define FIXADDR_SIZE ((__end_of_fixed_addresses) << PAGE_SHIFT) +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) + +#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) +#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) + +extern void __this_fixmap_does_not_exist(void); + +/* + * 'index to address' translation. If anyone tries to use the idx + * directly without tranlation, we catch the bug with a NULL-deference + * kernel oops. Illegal ranges of incoming indices are caught too. + */ +static inline unsigned long fix_to_virt(const unsigned int idx) +{ + /* + * this branch gets completely eliminated after inlining, + * except when someone tries to use fixaddr indices in an + * illegal way. (such as mixing up address types or using + * out-of-range indices). + * + * If it doesn't get removed, the linker will complain + * loudly with a reasonably clear error message.. + */ + if (idx >= __end_of_fixed_addresses) + __this_fixmap_does_not_exist(); + + return __fix_to_virt(idx); +} + +static inline unsigned long virt_to_fix(const unsigned long vaddr) +{ + BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); + return __virt_to_fix(vaddr); +} + +#endif diff --git a/arch/sparc/include/asm/floppy.h b/arch/sparc/include/asm/floppy.h new file mode 100644 index 00000000000..faebd335b60 --- /dev/null +++ b/arch/sparc/include/asm/floppy.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_FLOPPY_H +#define ___ASM_SPARC_FLOPPY_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/floppy_64.h> +#else +#include <asm/floppy_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/floppy_32.h b/arch/sparc/include/asm/floppy_32.h new file mode 100644 index 00000000000..ae3f00bf22f --- /dev/null +++ b/arch/sparc/include/asm/floppy_32.h @@ -0,0 +1,388 @@ +/* asm/floppy.h: Sparc specific parts of the Floppy driver. + * + * Copyright (C) 1995 David S. Miller (davem@davemloft.net) + */ + +#ifndef __ASM_SPARC_FLOPPY_H +#define __ASM_SPARC_FLOPPY_H + +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/idprom.h> +#include <asm/machines.h> +#include <asm/oplib.h> +#include <asm/auxio.h> +#include <asm/irq.h> + +/* We don't need no stinkin' I/O port allocation crap. */ +#undef release_region +#undef request_region +#define release_region(X, Y) do { } while(0) +#define request_region(X, Y, Z) (1) + +/* References: + * 1) Netbsd Sun floppy driver. + * 2) NCR 82077 controller manual + * 3) Intel 82077 controller manual + */ +struct sun_flpy_controller { + volatile unsigned char status_82072; /* Main Status reg. */ +#define dcr_82072 status_82072 /* Digital Control reg. */ +#define status1_82077 status_82072 /* Auxiliary Status reg. 1 */ + + volatile unsigned char data_82072; /* Data fifo. */ +#define status2_82077 data_82072 /* Auxiliary Status reg. 2 */ + + volatile unsigned char dor_82077; /* Digital Output reg. */ + volatile unsigned char tapectl_82077; /* What the? Tape control reg? */ + + volatile unsigned char status_82077; /* Main Status Register. */ +#define drs_82077 status_82077 /* Digital Rate Select reg. */ + + volatile unsigned char data_82077; /* Data fifo. */ + volatile unsigned char ___unused; + volatile unsigned char dir_82077; /* Digital Input reg. */ +#define dcr_82077 dir_82077 /* Config Control reg. */ +}; + +/* You'll only ever find one controller on a SparcStation anyways. */ +static struct sun_flpy_controller *sun_fdc = NULL; +extern volatile unsigned char *fdc_status; + +struct sun_floppy_ops { + unsigned char (*fd_inb)(int port); + void (*fd_outb)(unsigned char value, int port); +}; + +static struct sun_floppy_ops sun_fdops; + +#define fd_inb(port) sun_fdops.fd_inb(port) +#define fd_outb(value,port) sun_fdops.fd_outb(value,port) +#define fd_enable_dma() sun_fd_enable_dma() +#define fd_disable_dma() sun_fd_disable_dma() +#define fd_request_dma() (0) /* nothing... */ +#define fd_free_dma() /* nothing... */ +#define fd_clear_dma_ff() /* nothing... */ +#define fd_set_dma_mode(mode) sun_fd_set_dma_mode(mode) +#define fd_set_dma_addr(addr) sun_fd_set_dma_addr(addr) +#define fd_set_dma_count(count) sun_fd_set_dma_count(count) +#define fd_enable_irq() /* nothing... */ +#define fd_disable_irq() /* nothing... */ +#define fd_cacheflush(addr, size) /* nothing... */ +#define fd_request_irq() sun_fd_request_irq() +#define fd_free_irq() /* nothing... */ +#if 0 /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */ +#define fd_dma_mem_alloc(size) ((unsigned long) vmalloc(size)) +#define fd_dma_mem_free(addr,size) (vfree((void *)(addr))) +#endif + +/* XXX This isn't really correct. XXX */ +#define get_dma_residue(x) (0) + +#define FLOPPY0_TYPE 4 +#define FLOPPY1_TYPE 0 + +/* Super paranoid... */ +#undef HAVE_DISABLE_HLT + +/* Here is where we catch the floppy driver trying to initialize, + * therefore this is where we call the PROM device tree probing + * routine etc. on the Sparc. + */ +#define FDC1 sun_floppy_init() + +#define N_FDC 1 +#define N_DRIVE 8 + +/* No 64k boundary crossing problems on the Sparc. */ +#define CROSS_64KB(a,s) (0) + +/* Routines unique to each controller type on a Sun. */ +static void sun_set_dor(unsigned char value, int fdc_82077) +{ + if (sparc_cpu_model == sun4c) { + unsigned int bits = 0; + if (value & 0x10) + bits |= AUXIO_FLPY_DSEL; + if ((value & 0x80) == 0) + bits |= AUXIO_FLPY_EJCT; + set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT)); + } + if (fdc_82077) { + sun_fdc->dor_82077 = value; + } +} + +static unsigned char sun_read_dir(void) +{ + if (sparc_cpu_model == sun4c) + return (get_auxio() & AUXIO_FLPY_DCHG) ? 0x80 : 0; + else + return sun_fdc->dir_82077; +} + +static unsigned char sun_82072_fd_inb(int port) +{ + udelay(5); + switch(port & 7) { + default: + printk("floppy: Asked to read unknown port %d\n", port); + panic("floppy: Port bolixed."); + case 4: /* FD_STATUS */ + return sun_fdc->status_82072 & ~STATUS_DMA; + case 5: /* FD_DATA */ + return sun_fdc->data_82072; + case 7: /* FD_DIR */ + return sun_read_dir(); + }; + panic("sun_82072_fd_inb: How did I get here?"); +} + +static void sun_82072_fd_outb(unsigned char value, int port) +{ + udelay(5); + switch(port & 7) { + default: + printk("floppy: Asked to write to unknown port %d\n", port); + panic("floppy: Port bolixed."); + case 2: /* FD_DOR */ + sun_set_dor(value, 0); + break; + case 5: /* FD_DATA */ + sun_fdc->data_82072 = value; + break; + case 7: /* FD_DCR */ + sun_fdc->dcr_82072 = value; + break; + case 4: /* FD_STATUS */ + sun_fdc->status_82072 = value; + break; + }; + return; +} + +static unsigned char sun_82077_fd_inb(int port) +{ + udelay(5); + switch(port & 7) { + default: + printk("floppy: Asked to read unknown port %d\n", port); + panic("floppy: Port bolixed."); + case 0: /* FD_STATUS_0 */ + return sun_fdc->status1_82077; + case 1: /* FD_STATUS_1 */ + return sun_fdc->status2_82077; + case 2: /* FD_DOR */ + return sun_fdc->dor_82077; + case 3: /* FD_TDR */ + return sun_fdc->tapectl_82077; + case 4: /* FD_STATUS */ + return sun_fdc->status_82077 & ~STATUS_DMA; + case 5: /* FD_DATA */ + return sun_fdc->data_82077; + case 7: /* FD_DIR */ + return sun_read_dir(); + }; + panic("sun_82077_fd_inb: How did I get here?"); +} + +static void sun_82077_fd_outb(unsigned char value, int port) +{ + udelay(5); + switch(port & 7) { + default: + printk("floppy: Asked to write to unknown port %d\n", port); + panic("floppy: Port bolixed."); + case 2: /* FD_DOR */ + sun_set_dor(value, 1); + break; + case 5: /* FD_DATA */ + sun_fdc->data_82077 = value; + break; + case 7: /* FD_DCR */ + sun_fdc->dcr_82077 = value; + break; + case 4: /* FD_STATUS */ + sun_fdc->status_82077 = value; + break; + case 3: /* FD_TDR */ + sun_fdc->tapectl_82077 = value; + break; + }; + return; +} + +/* For pseudo-dma (Sun floppy drives have no real DMA available to + * them so we must eat the data fifo bytes directly ourselves) we have + * three state variables. doing_pdma tells our inline low-level + * assembly floppy interrupt entry point whether it should sit and eat + * bytes from the fifo or just transfer control up to the higher level + * floppy interrupt c-code. I tried very hard but I could not get the + * pseudo-dma to work in c-code without getting many overruns and + * underruns. If non-zero, doing_pdma encodes the direction of + * the transfer for debugging. 1=read 2=write + */ +extern char *pdma_vaddr; +extern unsigned long pdma_size; +extern volatile int doing_pdma; + +/* This is software state */ +extern char *pdma_base; +extern unsigned long pdma_areasize; + +/* Common routines to all controller types on the Sparc. */ +static inline void virtual_dma_init(void) +{ + /* nothing... */ +} + +static inline void sun_fd_disable_dma(void) +{ + doing_pdma = 0; + if (pdma_base) { + mmu_unlockarea(pdma_base, pdma_areasize); + pdma_base = NULL; + } +} + +static inline void sun_fd_set_dma_mode(int mode) +{ + switch(mode) { + case DMA_MODE_READ: + doing_pdma = 1; + break; + case DMA_MODE_WRITE: + doing_pdma = 2; + break; + default: + printk("Unknown dma mode %d\n", mode); + panic("floppy: Giving up..."); + } +} + +static inline void sun_fd_set_dma_addr(char *buffer) +{ + pdma_vaddr = buffer; +} + +static inline void sun_fd_set_dma_count(int length) +{ + pdma_size = length; +} + +static inline void sun_fd_enable_dma(void) +{ + pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size); + pdma_base = pdma_vaddr; + pdma_areasize = pdma_size; +} + +/* Our low-level entry point in arch/sparc/kernel/entry.S */ +extern int sparc_floppy_request_irq(int irq, unsigned long flags, + irq_handler_t irq_handler); + +static int sun_fd_request_irq(void) +{ + static int once = 0; + int error; + + if(!once) { + once = 1; + error = sparc_floppy_request_irq(FLOPPY_IRQ, + IRQF_DISABLED, + floppy_interrupt); + return ((error == 0) ? 0 : -1); + } else return 0; +} + +static struct linux_prom_registers fd_regs[2]; + +static int sun_floppy_init(void) +{ + char state[128]; + int tnode, fd_node, num_regs; + struct resource r; + + use_virtual_dma = 1; + + FLOPPY_IRQ = 11; + /* Forget it if we aren't on a machine that could possibly + * ever have a floppy drive. + */ + if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) || + ((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) || + (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) { + /* We certainly don't have a floppy controller. */ + goto no_sun_fdc; + } + /* Well, try to find one. */ + tnode = prom_getchild(prom_root_node); + fd_node = prom_searchsiblings(tnode, "obio"); + if(fd_node != 0) { + tnode = prom_getchild(fd_node); + fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo"); + } else { + fd_node = prom_searchsiblings(tnode, "fd"); + } + if(fd_node == 0) { + goto no_sun_fdc; + } + + /* The sun4m lets us know if the controller is actually usable. */ + if(sparc_cpu_model == sun4m && + prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) { + if(!strcmp(state, "disabled")) { + goto no_sun_fdc; + } + } + num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs)); + num_regs = (num_regs / sizeof(fd_regs[0])); + prom_apply_obio_ranges(fd_regs, num_regs); + memset(&r, 0, sizeof(r)); + r.flags = fd_regs[0].which_io; + r.start = fd_regs[0].phys_addr; + sun_fdc = (struct sun_flpy_controller *) + sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy"); + + /* Last minute sanity check... */ + if(sun_fdc->status_82072 == 0xff) { + sun_fdc = NULL; + goto no_sun_fdc; + } + + sun_fdops.fd_inb = sun_82077_fd_inb; + sun_fdops.fd_outb = sun_82077_fd_outb; + fdc_status = &sun_fdc->status_82077; + + if (sun_fdc->dor_82077 == 0x80) { + sun_fdc->dor_82077 = 0x02; + if (sun_fdc->dor_82077 == 0x80) { + sun_fdops.fd_inb = sun_82072_fd_inb; + sun_fdops.fd_outb = sun_82072_fd_outb; + fdc_status = &sun_fdc->status_82072; + } + } + + /* Success... */ + allowed_drive_mask = 0x01; + return (int) sun_fdc; + +no_sun_fdc: + return -1; +} + +static int sparc_eject(void) +{ + set_dor(0x00, 0xff, 0x90); + udelay(500); + set_dor(0x00, 0x6f, 0x00); + udelay(500); + return 0; +} + +#define fd_eject(drive) sparc_eject() + +#define EXTRA_FLOPPY_PARAMS + +#endif /* !(__ASM_SPARC_FLOPPY_H) */ diff --git a/arch/sparc/include/asm/floppy_64.h b/arch/sparc/include/asm/floppy_64.h new file mode 100644 index 00000000000..c39db1060bc --- /dev/null +++ b/arch/sparc/include/asm/floppy_64.h @@ -0,0 +1,782 @@ +/* floppy.h: Sparc specific parts of the Floppy driver. + * + * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net) + * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + * + * Ultra/PCI support added: Sep 1997 Eddie C. Dost (ecd@skynet.be) + */ + +#ifndef __ASM_SPARC64_FLOPPY_H +#define __ASM_SPARC64_FLOPPY_H + +#include <linux/init.h> +#include <linux/pci.h> + +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/idprom.h> +#include <asm/oplib.h> +#include <asm/auxio.h> +#include <asm/sbus.h> +#include <asm/irq.h> + + +/* + * Define this to enable exchanging drive 0 and 1 if only drive 1 is + * probed on PCI machines. + */ +#undef PCI_FDC_SWAP_DRIVES + + +/* References: + * 1) Netbsd Sun floppy driver. + * 2) NCR 82077 controller manual + * 3) Intel 82077 controller manual + */ +struct sun_flpy_controller { + volatile unsigned char status1_82077; /* Auxiliary Status reg. 1 */ + volatile unsigned char status2_82077; /* Auxiliary Status reg. 2 */ + volatile unsigned char dor_82077; /* Digital Output reg. */ + volatile unsigned char tapectl_82077; /* Tape Control reg */ + volatile unsigned char status_82077; /* Main Status Register. */ +#define drs_82077 status_82077 /* Digital Rate Select reg. */ + volatile unsigned char data_82077; /* Data fifo. */ + volatile unsigned char ___unused; + volatile unsigned char dir_82077; /* Digital Input reg. */ +#define dcr_82077 dir_82077 /* Config Control reg. */ +}; + +/* You'll only ever find one controller on an Ultra anyways. */ +static struct sun_flpy_controller *sun_fdc = (struct sun_flpy_controller *)-1; +unsigned long fdc_status; +static struct sbus_dev *floppy_sdev = NULL; + +struct sun_floppy_ops { + unsigned char (*fd_inb) (unsigned long port); + void (*fd_outb) (unsigned char value, unsigned long port); + void (*fd_enable_dma) (void); + void (*fd_disable_dma) (void); + void (*fd_set_dma_mode) (int); + void (*fd_set_dma_addr) (char *); + void (*fd_set_dma_count) (int); + unsigned int (*get_dma_residue) (void); + int (*fd_request_irq) (void); + void (*fd_free_irq) (void); + int (*fd_eject) (int); +}; + +static struct sun_floppy_ops sun_fdops; + +#define fd_inb(port) sun_fdops.fd_inb(port) +#define fd_outb(value,port) sun_fdops.fd_outb(value,port) +#define fd_enable_dma() sun_fdops.fd_enable_dma() +#define fd_disable_dma() sun_fdops.fd_disable_dma() +#define fd_request_dma() (0) /* nothing... */ +#define fd_free_dma() /* nothing... */ +#define fd_clear_dma_ff() /* nothing... */ +#define fd_set_dma_mode(mode) sun_fdops.fd_set_dma_mode(mode) +#define fd_set_dma_addr(addr) sun_fdops.fd_set_dma_addr(addr) +#define fd_set_dma_count(count) sun_fdops.fd_set_dma_count(count) +#define get_dma_residue(x) sun_fdops.get_dma_residue() +#define fd_cacheflush(addr, size) /* nothing... */ +#define fd_request_irq() sun_fdops.fd_request_irq() +#define fd_free_irq() sun_fdops.fd_free_irq() +#define fd_eject(drive) sun_fdops.fd_eject(drive) + +/* Super paranoid... */ +#undef HAVE_DISABLE_HLT + +static int sun_floppy_types[2] = { 0, 0 }; + +/* Here is where we catch the floppy driver trying to initialize, + * therefore this is where we call the PROM device tree probing + * routine etc. on the Sparc. + */ +#define FLOPPY0_TYPE sun_floppy_init() +#define FLOPPY1_TYPE sun_floppy_types[1] + +#define FDC1 ((unsigned long)sun_fdc) + +#define N_FDC 1 +#define N_DRIVE 8 + +/* No 64k boundary crossing problems on the Sparc. */ +#define CROSS_64KB(a,s) (0) + +static unsigned char sun_82077_fd_inb(unsigned long port) +{ + udelay(5); + switch(port & 7) { + default: + printk("floppy: Asked to read unknown port %lx\n", port); + panic("floppy: Port bolixed."); + case 4: /* FD_STATUS */ + return sbus_readb(&sun_fdc->status_82077) & ~STATUS_DMA; + case 5: /* FD_DATA */ + return sbus_readb(&sun_fdc->data_82077); + case 7: /* FD_DIR */ + /* XXX: Is DCL on 0x80 in sun4m? */ + return sbus_readb(&sun_fdc->dir_82077); + }; + panic("sun_82072_fd_inb: How did I get here?"); +} + +static void sun_82077_fd_outb(unsigned char value, unsigned long port) +{ + udelay(5); + switch(port & 7) { + default: + printk("floppy: Asked to write to unknown port %lx\n", port); + panic("floppy: Port bolixed."); + case 2: /* FD_DOR */ + /* Happily, the 82077 has a real DOR register. */ + sbus_writeb(value, &sun_fdc->dor_82077); + break; + case 5: /* FD_DATA */ + sbus_writeb(value, &sun_fdc->data_82077); + break; + case 7: /* FD_DCR */ + sbus_writeb(value, &sun_fdc->dcr_82077); + break; + case 4: /* FD_STATUS */ + sbus_writeb(value, &sun_fdc->status_82077); + break; + }; + return; +} + +/* For pseudo-dma (Sun floppy drives have no real DMA available to + * them so we must eat the data fifo bytes directly ourselves) we have + * three state variables. doing_pdma tells our inline low-level + * assembly floppy interrupt entry point whether it should sit and eat + * bytes from the fifo or just transfer control up to the higher level + * floppy interrupt c-code. I tried very hard but I could not get the + * pseudo-dma to work in c-code without getting many overruns and + * underruns. If non-zero, doing_pdma encodes the direction of + * the transfer for debugging. 1=read 2=write + */ +unsigned char *pdma_vaddr; +unsigned long pdma_size; +volatile int doing_pdma = 0; + +/* This is software state */ +char *pdma_base = NULL; +unsigned long pdma_areasize; + +/* Common routines to all controller types on the Sparc. */ +static void sun_fd_disable_dma(void) +{ + doing_pdma = 0; + if (pdma_base) { + mmu_unlockarea(pdma_base, pdma_areasize); + pdma_base = NULL; + } +} + +static void sun_fd_set_dma_mode(int mode) +{ + switch(mode) { + case DMA_MODE_READ: + doing_pdma = 1; + break; + case DMA_MODE_WRITE: + doing_pdma = 2; + break; + default: + printk("Unknown dma mode %d\n", mode); + panic("floppy: Giving up..."); + } +} + +static void sun_fd_set_dma_addr(char *buffer) +{ + pdma_vaddr = buffer; +} + +static void sun_fd_set_dma_count(int length) +{ + pdma_size = length; +} + +static void sun_fd_enable_dma(void) +{ + pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size); + pdma_base = pdma_vaddr; + pdma_areasize = pdma_size; +} + +irqreturn_t sparc_floppy_irq(int irq, void *dev_cookie) +{ + if (likely(doing_pdma)) { + void __iomem *stat = (void __iomem *) fdc_status; + unsigned char *vaddr = pdma_vaddr; + unsigned long size = pdma_size; + u8 val; + + while (size) { + val = readb(stat); + if (unlikely(!(val & 0x80))) { + pdma_vaddr = vaddr; + pdma_size = size; + return IRQ_HANDLED; + } + if (unlikely(!(val & 0x20))) { + pdma_vaddr = vaddr; + pdma_size = size; + doing_pdma = 0; + goto main_interrupt; + } + if (val & 0x40) { + /* read */ + *vaddr++ = readb(stat + 1); + } else { + unsigned char data = *vaddr++; + + /* write */ + writeb(data, stat + 1); + } + size--; + } + + pdma_vaddr = vaddr; + pdma_size = size; + + /* Send Terminal Count pulse to floppy controller. */ + val = readb(auxio_register); + val |= AUXIO_AUX1_FTCNT; + writeb(val, auxio_register); + val &= ~AUXIO_AUX1_FTCNT; + writeb(val, auxio_register); + + doing_pdma = 0; + } + +main_interrupt: + return floppy_interrupt(irq, dev_cookie); +} + +static int sun_fd_request_irq(void) +{ + static int once = 0; + int error; + + if(!once) { + once = 1; + + error = request_irq(FLOPPY_IRQ, sparc_floppy_irq, + IRQF_DISABLED, "floppy", NULL); + + return ((error == 0) ? 0 : -1); + } + return 0; +} + +static void sun_fd_free_irq(void) +{ +} + +static unsigned int sun_get_dma_residue(void) +{ + /* XXX This isn't really correct. XXX */ + return 0; +} + +static int sun_fd_eject(int drive) +{ + set_dor(0x00, 0xff, 0x90); + udelay(500); + set_dor(0x00, 0x6f, 0x00); + udelay(500); + return 0; +} + +#ifdef CONFIG_PCI +#include <asm/ebus.h> +#include <asm/ns87303.h> + +static struct ebus_dma_info sun_pci_fd_ebus_dma; +static struct pci_dev *sun_pci_ebus_dev; +static int sun_pci_broken_drive = -1; + +struct sun_pci_dma_op { + unsigned int addr; + int len; + int direction; + char *buf; +}; +static struct sun_pci_dma_op sun_pci_dma_current = { -1U, 0, 0, NULL}; +static struct sun_pci_dma_op sun_pci_dma_pending = { -1U, 0, 0, NULL}; + +extern irqreturn_t floppy_interrupt(int irq, void *dev_id); + +static unsigned char sun_pci_fd_inb(unsigned long port) +{ + udelay(5); + return inb(port); +} + +static void sun_pci_fd_outb(unsigned char val, unsigned long port) +{ + udelay(5); + outb(val, port); +} + +static void sun_pci_fd_broken_outb(unsigned char val, unsigned long port) +{ + udelay(5); + /* + * XXX: Due to SUN's broken floppy connector on AX and AXi + * we need to turn on MOTOR_0 also, if the floppy is + * jumpered to DS1 (like most PC floppies are). I hope + * this does not hurt correct hardware like the AXmp. + * (Eddie, Sep 12 1998). + */ + if (port == ((unsigned long)sun_fdc) + 2) { + if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x20)) { + val |= 0x10; + } + } + outb(val, port); +} + +#ifdef PCI_FDC_SWAP_DRIVES +static void sun_pci_fd_lde_broken_outb(unsigned char val, unsigned long port) +{ + udelay(5); + /* + * XXX: Due to SUN's broken floppy connector on AX and AXi + * we need to turn on MOTOR_0 also, if the floppy is + * jumpered to DS1 (like most PC floppies are). I hope + * this does not hurt correct hardware like the AXmp. + * (Eddie, Sep 12 1998). + */ + if (port == ((unsigned long)sun_fdc) + 2) { + if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x10)) { + val &= ~(0x03); + val |= 0x21; + } + } + outb(val, port); +} +#endif /* PCI_FDC_SWAP_DRIVES */ + +static void sun_pci_fd_enable_dma(void) +{ + BUG_ON((NULL == sun_pci_dma_pending.buf) || + (0 == sun_pci_dma_pending.len) || + (0 == sun_pci_dma_pending.direction)); + + sun_pci_dma_current.buf = sun_pci_dma_pending.buf; + sun_pci_dma_current.len = sun_pci_dma_pending.len; + sun_pci_dma_current.direction = sun_pci_dma_pending.direction; + + sun_pci_dma_pending.buf = NULL; + sun_pci_dma_pending.len = 0; + sun_pci_dma_pending.direction = 0; + sun_pci_dma_pending.addr = -1U; + + sun_pci_dma_current.addr = + pci_map_single(sun_pci_ebus_dev, + sun_pci_dma_current.buf, + sun_pci_dma_current.len, + sun_pci_dma_current.direction); + + ebus_dma_enable(&sun_pci_fd_ebus_dma, 1); + + if (ebus_dma_request(&sun_pci_fd_ebus_dma, + sun_pci_dma_current.addr, + sun_pci_dma_current.len)) + BUG(); +} + +static void sun_pci_fd_disable_dma(void) +{ + ebus_dma_enable(&sun_pci_fd_ebus_dma, 0); + if (sun_pci_dma_current.addr != -1U) + pci_unmap_single(sun_pci_ebus_dev, + sun_pci_dma_current.addr, + sun_pci_dma_current.len, + sun_pci_dma_current.direction); + sun_pci_dma_current.addr = -1U; +} + +static void sun_pci_fd_set_dma_mode(int mode) +{ + if (mode == DMA_MODE_WRITE) + sun_pci_dma_pending.direction = PCI_DMA_TODEVICE; + else + sun_pci_dma_pending.direction = PCI_DMA_FROMDEVICE; + + ebus_dma_prepare(&sun_pci_fd_ebus_dma, mode != DMA_MODE_WRITE); +} + +static void sun_pci_fd_set_dma_count(int length) +{ + sun_pci_dma_pending.len = length; +} + +static void sun_pci_fd_set_dma_addr(char *buffer) +{ + sun_pci_dma_pending.buf = buffer; +} + +static unsigned int sun_pci_get_dma_residue(void) +{ + return ebus_dma_residue(&sun_pci_fd_ebus_dma); +} + +static int sun_pci_fd_request_irq(void) +{ + return ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 1); +} + +static void sun_pci_fd_free_irq(void) +{ + ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 0); +} + +static int sun_pci_fd_eject(int drive) +{ + return -EINVAL; +} + +void sun_pci_fd_dma_callback(struct ebus_dma_info *p, int event, void *cookie) +{ + floppy_interrupt(0, NULL); +} + +/* + * Floppy probing, we'd like to use /dev/fd0 for a single Floppy on PCI, + * even if this is configured using DS1, thus looks like /dev/fd1 with + * the cabling used in Ultras. + */ +#define DOR (port + 2) +#define MSR (port + 4) +#define FIFO (port + 5) + +static void sun_pci_fd_out_byte(unsigned long port, unsigned char val, + unsigned long reg) +{ + unsigned char status; + int timeout = 1000; + + while (!((status = inb(MSR)) & 0x80) && --timeout) + udelay(100); + outb(val, reg); +} + +static unsigned char sun_pci_fd_sensei(unsigned long port) +{ + unsigned char result[2] = { 0x70, 0x00 }; + unsigned char status; + int i = 0; + + sun_pci_fd_out_byte(port, 0x08, FIFO); + do { + int timeout = 1000; + + while (!((status = inb(MSR)) & 0x80) && --timeout) + udelay(100); + + if (!timeout) + break; + + if ((status & 0xf0) == 0xd0) + result[i++] = inb(FIFO); + else + break; + } while (i < 2); + + return result[0]; +} + +static void sun_pci_fd_reset(unsigned long port) +{ + unsigned char mask = 0x00; + unsigned char status; + int timeout = 10000; + + outb(0x80, MSR); + do { + status = sun_pci_fd_sensei(port); + if ((status & 0xc0) == 0xc0) + mask |= 1 << (status & 0x03); + else + udelay(100); + } while ((mask != 0x0f) && --timeout); +} + +static int sun_pci_fd_test_drive(unsigned long port, int drive) +{ + unsigned char status, data; + int timeout = 1000; + int ready; + + sun_pci_fd_reset(port); + + data = (0x10 << drive) | 0x0c | drive; + sun_pci_fd_out_byte(port, data, DOR); + + sun_pci_fd_out_byte(port, 0x07, FIFO); + sun_pci_fd_out_byte(port, drive & 0x03, FIFO); + + do { + udelay(100); + status = sun_pci_fd_sensei(port); + } while (((status & 0xc0) == 0x80) && --timeout); + + if (!timeout) + ready = 0; + else + ready = (status & 0x10) ? 0 : 1; + + sun_pci_fd_reset(port); + return ready; +} +#undef FIFO +#undef MSR +#undef DOR + +#endif /* CONFIG_PCI */ + +#ifdef CONFIG_PCI +static int __init ebus_fdthree_p(struct linux_ebus_device *edev) +{ + if (!strcmp(edev->prom_node->name, "fdthree")) + return 1; + if (!strcmp(edev->prom_node->name, "floppy")) { + const char *compat; + + compat = of_get_property(edev->prom_node, + "compatible", NULL); + if (compat && !strcmp(compat, "fdthree")) + return 1; + } + return 0; +} +#endif + +static unsigned long __init sun_floppy_init(void) +{ + char state[128]; + struct sbus_bus *bus; + struct sbus_dev *sdev = NULL; + static int initialized = 0; + + if (initialized) + return sun_floppy_types[0]; + initialized = 1; + + for_all_sbusdev (sdev, bus) { + if (!strcmp(sdev->prom_name, "SUNW,fdtwo")) + break; + } + if(sdev) { + floppy_sdev = sdev; + FLOPPY_IRQ = sdev->irqs[0]; + } else { +#ifdef CONFIG_PCI + struct linux_ebus *ebus; + struct linux_ebus_device *edev = NULL; + unsigned long config = 0; + void __iomem *auxio_reg; + const char *state_prop; + + for_each_ebus(ebus) { + for_each_ebusdev(edev, ebus) { + if (ebus_fdthree_p(edev)) + goto ebus_done; + } + } + ebus_done: + if (!edev) + return 0; + + state_prop = of_get_property(edev->prom_node, "status", NULL); + if (state_prop && !strncmp(state_prop, "disabled", 8)) + return 0; + + FLOPPY_IRQ = edev->irqs[0]; + + /* Make sure the high density bit is set, some systems + * (most notably Ultra5/Ultra10) come up with it clear. + */ + auxio_reg = (void __iomem *) edev->resource[2].start; + writel(readl(auxio_reg)|0x2, auxio_reg); + + sun_pci_ebus_dev = ebus->self; + + spin_lock_init(&sun_pci_fd_ebus_dma.lock); + + /* XXX ioremap */ + sun_pci_fd_ebus_dma.regs = (void __iomem *) + edev->resource[1].start; + if (!sun_pci_fd_ebus_dma.regs) + return 0; + + sun_pci_fd_ebus_dma.flags = (EBUS_DMA_FLAG_USE_EBDMA_HANDLER | + EBUS_DMA_FLAG_TCI_DISABLE); + sun_pci_fd_ebus_dma.callback = sun_pci_fd_dma_callback; + sun_pci_fd_ebus_dma.client_cookie = NULL; + sun_pci_fd_ebus_dma.irq = FLOPPY_IRQ; + strcpy(sun_pci_fd_ebus_dma.name, "floppy"); + if (ebus_dma_register(&sun_pci_fd_ebus_dma)) + return 0; + + /* XXX ioremap */ + sun_fdc = (struct sun_flpy_controller *)edev->resource[0].start; + + sun_fdops.fd_inb = sun_pci_fd_inb; + sun_fdops.fd_outb = sun_pci_fd_outb; + + can_use_virtual_dma = use_virtual_dma = 0; + sun_fdops.fd_enable_dma = sun_pci_fd_enable_dma; + sun_fdops.fd_disable_dma = sun_pci_fd_disable_dma; + sun_fdops.fd_set_dma_mode = sun_pci_fd_set_dma_mode; + sun_fdops.fd_set_dma_addr = sun_pci_fd_set_dma_addr; + sun_fdops.fd_set_dma_count = sun_pci_fd_set_dma_count; + sun_fdops.get_dma_residue = sun_pci_get_dma_residue; + + sun_fdops.fd_request_irq = sun_pci_fd_request_irq; + sun_fdops.fd_free_irq = sun_pci_fd_free_irq; + + sun_fdops.fd_eject = sun_pci_fd_eject; + + fdc_status = (unsigned long) &sun_fdc->status_82077; + + /* + * XXX: Find out on which machines this is really needed. + */ + if (1) { + sun_pci_broken_drive = 1; + sun_fdops.fd_outb = sun_pci_fd_broken_outb; + } + + allowed_drive_mask = 0; + if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 0)) + sun_floppy_types[0] = 4; + if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 1)) + sun_floppy_types[1] = 4; + + /* + * Find NS87303 SuperIO config registers (through ecpp). + */ + for_each_ebus(ebus) { + for_each_ebusdev(edev, ebus) { + if (!strcmp(edev->prom_node->name, "ecpp")) { + config = edev->resource[1].start; + goto config_done; + } + } + } + config_done: + + /* + * Sanity check, is this really the NS87303? + */ + switch (config & 0x3ff) { + case 0x02e: + case 0x15c: + case 0x26e: + case 0x398: + break; + default: + config = 0; + } + + if (!config) + return sun_floppy_types[0]; + + /* Enable PC-AT mode. */ + ns87303_modify(config, ASC, 0, 0xc0); + +#ifdef PCI_FDC_SWAP_DRIVES + /* + * If only Floppy 1 is present, swap drives. + */ + if (!sun_floppy_types[0] && sun_floppy_types[1]) { + /* + * Set the drive exchange bit in FCR on NS87303, + * make sure other bits are sane before doing so. + */ + ns87303_modify(config, FER, FER_EDM, 0); + ns87303_modify(config, ASC, ASC_DRV2_SEL, 0); + ns87303_modify(config, FCR, 0, FCR_LDE); + + config = sun_floppy_types[0]; + sun_floppy_types[0] = sun_floppy_types[1]; + sun_floppy_types[1] = config; + + if (sun_pci_broken_drive != -1) { + sun_pci_broken_drive = 1 - sun_pci_broken_drive; + sun_fdops.fd_outb = sun_pci_fd_lde_broken_outb; + } + } +#endif /* PCI_FDC_SWAP_DRIVES */ + + return sun_floppy_types[0]; +#else + return 0; +#endif + } + prom_getproperty(sdev->prom_node, "status", state, sizeof(state)); + if(!strncmp(state, "disabled", 8)) + return 0; + + /* + * We cannot do sbus_ioremap here: it does request_region, + * which the generic floppy driver tries to do once again. + * But we must use the sdev resource values as they have + * had parent ranges applied. + */ + sun_fdc = (struct sun_flpy_controller *) + (sdev->resource[0].start + + ((sdev->resource[0].flags & 0x1ffUL) << 32UL)); + + /* Last minute sanity check... */ + if(sbus_readb(&sun_fdc->status1_82077) == 0xff) { + sun_fdc = (struct sun_flpy_controller *)-1; + return 0; + } + + sun_fdops.fd_inb = sun_82077_fd_inb; + sun_fdops.fd_outb = sun_82077_fd_outb; + + can_use_virtual_dma = use_virtual_dma = 1; + sun_fdops.fd_enable_dma = sun_fd_enable_dma; + sun_fdops.fd_disable_dma = sun_fd_disable_dma; + sun_fdops.fd_set_dma_mode = sun_fd_set_dma_mode; + sun_fdops.fd_set_dma_addr = sun_fd_set_dma_addr; + sun_fdops.fd_set_dma_count = sun_fd_set_dma_count; + sun_fdops.get_dma_residue = sun_get_dma_residue; + + sun_fdops.fd_request_irq = sun_fd_request_irq; + sun_fdops.fd_free_irq = sun_fd_free_irq; + + sun_fdops.fd_eject = sun_fd_eject; + + fdc_status = (unsigned long) &sun_fdc->status_82077; + + /* Success... */ + allowed_drive_mask = 0x01; + sun_floppy_types[0] = 4; + sun_floppy_types[1] = 0; + + return sun_floppy_types[0]; +} + +#define EXTRA_FLOPPY_PARAMS + +static DEFINE_SPINLOCK(dma_spin_lock); + +#define claim_dma_lock() \ +({ unsigned long flags; \ + spin_lock_irqsave(&dma_spin_lock, flags); \ + flags; \ +}) + +#define release_dma_lock(__flags) \ + spin_unlock_irqrestore(&dma_spin_lock, __flags); + +#endif /* !(__ASM_SPARC64_FLOPPY_H) */ diff --git a/arch/sparc/include/asm/fpumacro.h b/arch/sparc/include/asm/fpumacro.h new file mode 100644 index 00000000000..cc463fec806 --- /dev/null +++ b/arch/sparc/include/asm/fpumacro.h @@ -0,0 +1,33 @@ +/* fpumacro.h: FPU related macros. + * + * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC64_FPUMACRO_H +#define _SPARC64_FPUMACRO_H + +#include <asm/asi.h> +#include <asm/visasm.h> + +struct fpustate { + u32 regs[64]; +}; + +#define FPUSTATE (struct fpustate *)(current_thread_info()->fpregs) + +static inline unsigned long fprs_read(void) +{ + unsigned long retval; + + __asm__ __volatile__("rd %%fprs, %0" : "=r" (retval)); + + return retval; +} + +static inline void fprs_write(unsigned long val) +{ + __asm__ __volatile__("wr %0, 0x0, %%fprs" : : "r" (val)); +} + +#endif /* !(_SPARC64_FPUMACRO_H) */ diff --git a/arch/sparc/include/asm/ftrace.h b/arch/sparc/include/asm/ftrace.h new file mode 100644 index 00000000000..d27716cd38c --- /dev/null +++ b/arch/sparc/include/asm/ftrace.h @@ -0,0 +1,14 @@ +#ifndef _ASM_SPARC64_FTRACE +#define _ASM_SPARC64_FTRACE + +#ifdef CONFIG_MCOUNT +#define MCOUNT_ADDR ((long)(_mcount)) +#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ + +#ifndef __ASSEMBLY__ +extern void _mcount(void); +#endif + +#endif + +#endif /* _ASM_SPARC64_FTRACE */ diff --git a/arch/sparc/include/asm/futex.h b/arch/sparc/include/asm/futex.h new file mode 100644 index 00000000000..736335f3671 --- /dev/null +++ b/arch/sparc/include/asm/futex.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_FUTEX_H +#define ___ASM_SPARC_FUTEX_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/futex_64.h> +#else +#include <asm/futex_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/futex_32.h b/arch/sparc/include/asm/futex_32.h new file mode 100644 index 00000000000..6a332a9f099 --- /dev/null +++ b/arch/sparc/include/asm/futex_32.h @@ -0,0 +1,6 @@ +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#include <asm-generic/futex.h> + +#endif diff --git a/arch/sparc/include/asm/futex_64.h b/arch/sparc/include/asm/futex_64.h new file mode 100644 index 00000000000..d8378935ae9 --- /dev/null +++ b/arch/sparc/include/asm/futex_64.h @@ -0,0 +1,110 @@ +#ifndef _SPARC64_FUTEX_H +#define _SPARC64_FUTEX_H + +#include <linux/futex.h> +#include <linux/uaccess.h> +#include <asm/errno.h> +#include <asm/system.h> + +#define __futex_cas_op(insn, ret, oldval, uaddr, oparg) \ + __asm__ __volatile__( \ + "\n1: lduwa [%3] %%asi, %2\n" \ + " " insn "\n" \ + "2: casa [%3] %%asi, %2, %1\n" \ + " cmp %2, %1\n" \ + " bne,pn %%icc, 1b\n" \ + " mov 0, %0\n" \ + "3:\n" \ + " .section .fixup,#alloc,#execinstr\n" \ + " .align 4\n" \ + "4: sethi %%hi(3b), %0\n" \ + " jmpl %0 + %%lo(3b), %%g0\n" \ + " mov %5, %0\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .word 1b, 4b\n" \ + " .word 2b, 4b\n" \ + " .previous\n" \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tem) \ + : "r" (uaddr), "r" (oparg), "i" (-EFAULT) \ + : "memory") + +static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret, tem; + + if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))) + return -EFAULT; + if (unlikely((((unsigned long) uaddr) & 0x3UL))) + return -EINVAL; + + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + __futex_cas_op("mov\t%4, %1", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ADD: + __futex_cas_op("add\t%2, %4, %1", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_cas_op("or\t%2, %4, %1", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_cas_op("and\t%2, %4, %1", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_XOR: + __futex_cas_op("xor\t%2, %4, %1", ret, oldval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + __asm__ __volatile__( + "\n1: casa [%3] %%asi, %2, %0\n" + "2:\n" + " .section .fixup,#alloc,#execinstr\n" + " .align 4\n" + "3: sethi %%hi(2b), %0\n" + " jmpl %0 + %%lo(2b), %%g0\n" + " mov %4, %0\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + " .align 4\n" + " .word 1b, 3b\n" + " .previous\n" + : "=r" (newval) + : "0" (newval), "r" (oldval), "r" (uaddr), "i" (-EFAULT) + : "memory"); + + return newval; +} + +#endif /* !(_SPARC64_FUTEX_H) */ diff --git a/arch/sparc/include/asm/hardirq.h b/arch/sparc/include/asm/hardirq.h new file mode 100644 index 00000000000..44d4e234514 --- /dev/null +++ b/arch/sparc/include/asm/hardirq.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_HARDIRQ_H +#define ___ASM_SPARC_HARDIRQ_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/hardirq_64.h> +#else +#include <asm/hardirq_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/hardirq_32.h b/arch/sparc/include/asm/hardirq_32.h new file mode 100644 index 00000000000..4f63ed8df55 --- /dev/null +++ b/arch/sparc/include/asm/hardirq_32.h @@ -0,0 +1,23 @@ +/* hardirq.h: 32-bit Sparc hard IRQ support. + * + * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1998-2000 Anton Blanchard (anton@samba.org) + */ + +#ifndef __SPARC_HARDIRQ_H +#define __SPARC_HARDIRQ_H + +#include <linux/threads.h> +#include <linux/spinlock.h> +#include <linux/cache.h> + +/* entry.S is sensitive to the offsets of these fields */ /* XXX P3 Is it? */ +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ + +#define HARDIRQ_BITS 8 + +#endif /* __SPARC_HARDIRQ_H */ diff --git a/arch/sparc/include/asm/hardirq_64.h b/arch/sparc/include/asm/hardirq_64.h new file mode 100644 index 00000000000..7c29fd1a87a --- /dev/null +++ b/arch/sparc/include/asm/hardirq_64.h @@ -0,0 +1,19 @@ +/* hardirq.h: 64-bit Sparc hard IRQ support. + * + * Copyright (C) 1997, 1998, 2005 David S. Miller (davem@davemloft.net) + */ + +#ifndef __SPARC64_HARDIRQ_H +#define __SPARC64_HARDIRQ_H + +#include <asm/cpudata.h> + +#define __ARCH_IRQ_STAT +#define local_softirq_pending() \ + (local_cpu_data().__softirq_pending) + +void ack_bad_irq(unsigned int irq); + +#define HARDIRQ_BITS 8 + +#endif /* !(__SPARC64_HARDIRQ_H) */ diff --git a/arch/sparc/include/asm/head.h b/arch/sparc/include/asm/head.h new file mode 100644 index 00000000000..be8f03f3e73 --- /dev/null +++ b/arch/sparc/include/asm/head.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_HEAD_H +#define ___ASM_SPARC_HEAD_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/head_64.h> +#else +#include <asm/head_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/head_32.h b/arch/sparc/include/asm/head_32.h new file mode 100644 index 00000000000..7c35491a8b5 --- /dev/null +++ b/arch/sparc/include/asm/head_32.h @@ -0,0 +1,102 @@ +#ifndef __SPARC_HEAD_H +#define __SPARC_HEAD_H + +#define KERNBASE 0xf0000000 /* First address the kernel will eventually be */ +#define LOAD_ADDR 0x4000 /* prom jumps to us here unless this is elf /boot */ +#define SUN4C_SEGSZ (1 << 18) +#define SRMMU_L1_KBASE_OFFSET ((KERNBASE>>24)<<2) /* Used in boot remapping. */ +#define INTS_ENAB 0x01 /* entry.S uses this. */ + +#define SUN4_PROM_VECTOR 0xFFE81000 /* SUN4 PROM needs to be hardwired */ + +#define WRITE_PAUSE nop; nop; nop; /* Have to do this after %wim/%psr chg */ +#define NOP_INSN 0x01000000 /* Used to patch sparc_save_state */ + +/* Here are some trap goodies */ + +/* Generic trap entry. */ +#define TRAP_ENTRY(type, label) \ + rd %psr, %l0; b label; rd %wim, %l3; nop; + +/* Data/text faults. Defaults to sun4c version at boot time. */ +#define SPARC_TFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 1, %l7; +#define SPARC_DFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 0, %l7; +#define SRMMU_TFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 1, %l7; +#define SRMMU_DFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 0, %l7; + +/* This is for traps we should NEVER get. */ +#define BAD_TRAP(num) \ + rd %psr, %l0; mov num, %l7; b bad_trap_handler; rd %wim, %l3; + +/* This is for traps when we want just skip the instruction which caused it */ +#define SKIP_TRAP(type, name) \ + jmpl %l2, %g0; rett %l2 + 4; nop; nop; + +/* Notice that for the system calls we pull a trick. We load up a + * different pointer to the system call vector table in %l7, but call + * the same generic system call low-level entry point. The trap table + * entry sequences are also HyperSparc pipeline friendly ;-) + */ + +/* Software trap for Linux system calls. */ +#define LINUX_SYSCALL_TRAP \ + sethi %hi(sys_call_table), %l7; \ + or %l7, %lo(sys_call_table), %l7; \ + b linux_sparc_syscall; \ + rd %psr, %l0; + +#define BREAKPOINT_TRAP \ + b breakpoint_trap; \ + rd %psr,%l0; \ + nop; \ + nop; + +#ifdef CONFIG_KGDB +#define KGDB_TRAP(num) \ + b kgdb_trap_low; \ + rd %psr,%l0; \ + nop; \ + nop; +#else +#define KGDB_TRAP(num) \ + BAD_TRAP(num) +#endif + +/* The Get Condition Codes software trap for userland. */ +#define GETCC_TRAP \ + b getcc_trap_handler; mov %psr, %l0; nop; nop; + +/* The Set Condition Codes software trap for userland. */ +#define SETCC_TRAP \ + b setcc_trap_handler; mov %psr, %l0; nop; nop; + +/* The Get PSR software trap for userland. */ +#define GETPSR_TRAP \ + mov %psr, %i0; jmp %l2; rett %l2 + 4; nop; + +/* This is for hard interrupts from level 1-14, 15 is non-maskable (nmi) and + * gets handled with another macro. + */ +#define TRAP_ENTRY_INTERRUPT(int_level) \ + mov int_level, %l7; rd %psr, %l0; b real_irq_entry; rd %wim, %l3; + +/* NMI's (Non Maskable Interrupts) are special, you can't keep them + * from coming in, and basically if you get one, the shows over. ;( + * On the sun4c they are usually asynchronous memory errors, on the + * the sun4m they could be either due to mem errors or a software + * initiated interrupt from the prom/kern on an SMP box saying "I + * command you to do CPU tricks, read your mailbox for more info." + */ +#define NMI_TRAP \ + rd %wim, %l3; b linux_trap_nmi_sun4c; mov %psr, %l0; nop; + +/* Window overflows/underflows are special and we need to try to be as + * efficient as possible here.... + */ +#define WINDOW_SPILL \ + rd %psr, %l0; rd %wim, %l3; b spill_window_entry; andcc %l0, PSR_PS, %g0; + +#define WINDOW_FILL \ + rd %psr, %l0; rd %wim, %l3; b fill_window_entry; andcc %l0, PSR_PS, %g0; + +#endif /* __SPARC_HEAD_H */ diff --git a/arch/sparc/include/asm/head_64.h b/arch/sparc/include/asm/head_64.h new file mode 100644 index 00000000000..10e9dabc4c4 --- /dev/null +++ b/arch/sparc/include/asm/head_64.h @@ -0,0 +1,76 @@ +#ifndef _SPARC64_HEAD_H +#define _SPARC64_HEAD_H + +#include <asm/pstate.h> + + /* wrpr %g0, val, %gl */ +#define SET_GL(val) \ + .word 0xa1902000 | val + + /* rdpr %gl, %gN */ +#define GET_GL_GLOBAL(N) \ + .word 0x81540000 | (N << 25) + +#define KERNBASE 0x400000 + +#define PTREGS_OFF (STACK_BIAS + STACKFRAME_SZ) + +#define __CHEETAH_ID 0x003e0014 +#define __JALAPENO_ID 0x003e0016 +#define __SERRANO_ID 0x003e0022 + +#define CHEETAH_MANUF 0x003e +#define CHEETAH_IMPL 0x0014 /* Ultra-III */ +#define CHEETAH_PLUS_IMPL 0x0015 /* Ultra-III+ */ +#define JALAPENO_IMPL 0x0016 /* Ultra-IIIi */ +#define JAGUAR_IMPL 0x0018 /* Ultra-IV */ +#define PANTHER_IMPL 0x0019 /* Ultra-IV+ */ +#define SERRANO_IMPL 0x0022 /* Ultra-IIIi+ */ + +#define BRANCH_IF_SUN4V(tmp1,label) \ + sethi %hi(is_sun4v), %tmp1; \ + lduw [%tmp1 + %lo(is_sun4v)], %tmp1; \ + brnz,pn %tmp1, label; \ + nop + +#define BRANCH_IF_CHEETAH_BASE(tmp1,tmp2,label) \ + rdpr %ver, %tmp1; \ + sethi %hi(__CHEETAH_ID), %tmp2; \ + srlx %tmp1, 32, %tmp1; \ + or %tmp2, %lo(__CHEETAH_ID), %tmp2;\ + cmp %tmp1, %tmp2; \ + be,pn %icc, label; \ + nop; + +#define BRANCH_IF_JALAPENO(tmp1,tmp2,label) \ + rdpr %ver, %tmp1; \ + sethi %hi(__JALAPENO_ID), %tmp2; \ + srlx %tmp1, 32, %tmp1; \ + or %tmp2, %lo(__JALAPENO_ID), %tmp2;\ + cmp %tmp1, %tmp2; \ + be,pn %icc, label; \ + nop; + +#define BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(tmp1,tmp2,label) \ + rdpr %ver, %tmp1; \ + srlx %tmp1, (32 + 16), %tmp2; \ + cmp %tmp2, CHEETAH_MANUF; \ + bne,pt %xcc, 99f; \ + sllx %tmp1, 16, %tmp1; \ + srlx %tmp1, (32 + 16), %tmp2; \ + cmp %tmp2, CHEETAH_PLUS_IMPL; \ + bgeu,pt %xcc, label; \ +99: nop; + +#define BRANCH_IF_ANY_CHEETAH(tmp1,tmp2,label) \ + rdpr %ver, %tmp1; \ + srlx %tmp1, (32 + 16), %tmp2; \ + cmp %tmp2, CHEETAH_MANUF; \ + bne,pt %xcc, 99f; \ + sllx %tmp1, 16, %tmp1; \ + srlx %tmp1, (32 + 16), %tmp2; \ + cmp %tmp2, CHEETAH_IMPL; \ + bgeu,pt %xcc, label; \ +99: nop; + +#endif /* !(_SPARC64_HEAD_H) */ diff --git a/arch/sparc/include/asm/highmem.h b/arch/sparc/include/asm/highmem.h new file mode 100644 index 00000000000..3de42e77627 --- /dev/null +++ b/arch/sparc/include/asm/highmem.h @@ -0,0 +1,81 @@ +/* + * highmem.h: virtual kernel memory mappings for high memory + * + * Used in CONFIG_HIGHMEM systems for memory pages which + * are not addressable by direct kernel virtual addresses. + * + * Copyright (C) 1999 Gerhard Wichert, Siemens AG + * Gerhard.Wichert@pdb.siemens.de + * + * + * Redesigned the x86 32-bit VM architecture to deal with + * up to 16 Terrabyte physical memory. With current x86 CPUs + * we now support up to 64 Gigabytes physical RAM. + * + * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com> + */ + +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef __KERNEL__ + +#include <linux/interrupt.h> +#include <asm/fixmap.h> +#include <asm/vaddrs.h> +#include <asm/kmap_types.h> +#include <asm/pgtable.h> + +/* declarations for highmem.c */ +extern unsigned long highstart_pfn, highend_pfn; + +extern pte_t *kmap_pte; +extern pgprot_t kmap_prot; +extern pte_t *pkmap_page_table; + +extern void kmap_init(void) __init; + +/* + * Right now we initialize only a single pte table. It can be extended + * easily, subsequent pte tables have to be allocated in one physical + * chunk of RAM. Currently the simplest way to do this is to align the + * pkmap region on a pagetable boundary (4MB). + */ +#define LAST_PKMAP 1024 +#define PKMAP_SIZE (LAST_PKMAP << PAGE_SHIFT) +#define PKMAP_BASE PMD_ALIGN(SRMMU_NOCACHE_VADDR + (SRMMU_MAX_NOCACHE_PAGES << PAGE_SHIFT)) + +#define LAST_PKMAP_MASK (LAST_PKMAP - 1) +#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) + +#define PKMAP_END (PKMAP_ADDR(LAST_PKMAP)) + +extern void *kmap_high(struct page *page); +extern void kunmap_high(struct page *page); + +static inline void *kmap(struct page *page) +{ + BUG_ON(in_interrupt()); + if (!PageHighMem(page)) + return page_address(page); + return kmap_high(page); +} + +static inline void kunmap(struct page *page) +{ + BUG_ON(in_interrupt()); + if (!PageHighMem(page)) + return; + kunmap_high(page); +} + +extern void *kmap_atomic(struct page *page, enum km_type type); +extern void kunmap_atomic(void *kvaddr, enum km_type type); +extern struct page *kmap_atomic_to_page(void *vaddr); + +#define flush_cache_kmaps() flush_cache_all() + +#endif /* __KERNEL__ */ + +#endif /* _ASM_HIGHMEM_H */ diff --git a/arch/sparc/include/asm/hugetlb.h b/arch/sparc/include/asm/hugetlb.h new file mode 100644 index 00000000000..177061064ee --- /dev/null +++ b/arch/sparc/include/asm/hugetlb.h @@ -0,0 +1,85 @@ +#ifndef _ASM_SPARC64_HUGETLB_H +#define _ASM_SPARC64_HUGETLB_H + +#include <asm/page.h> + + +void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte); + +pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, + pte_t *ptep); + +void hugetlb_prefault_arch_hook(struct mm_struct *mm); + +static inline int is_hugepage_only_range(struct mm_struct *mm, + unsigned long addr, + unsigned long len) { + return 0; +} + +/* + * If the arch doesn't supply something else, assume that hugepage + * size aligned regions are ok without further preparation. + */ +static inline int prepare_hugepage_range(struct file *file, + unsigned long addr, unsigned long len) +{ + if (len & ~HPAGE_MASK) + return -EINVAL; + if (addr & ~HPAGE_MASK) + return -EINVAL; + return 0; +} + +static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb, + unsigned long addr, unsigned long end, + unsigned long floor, + unsigned long ceiling) +{ + free_pgd_range(tlb, addr, end, floor, ceiling); +} + +static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ +} + +static inline int huge_pte_none(pte_t pte) +{ + return pte_none(pte); +} + +static inline pte_t huge_pte_wrprotect(pte_t pte) +{ + return pte_wrprotect(pte); +} + +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + ptep_set_wrprotect(mm, addr, ptep); +} + +static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep, + pte_t pte, int dirty) +{ + return ptep_set_access_flags(vma, addr, ptep, pte, dirty); +} + +static inline pte_t huge_ptep_get(pte_t *ptep) +{ + return *ptep; +} + +static inline int arch_prepare_hugepage(struct page *page) +{ + return 0; +} + +static inline void arch_release_hugepage(struct page *page) +{ +} + +#endif /* _ASM_SPARC64_HUGETLB_H */ diff --git a/arch/sparc/include/asm/hvtramp.h b/arch/sparc/include/asm/hvtramp.h new file mode 100644 index 00000000000..b2b9b947b3a --- /dev/null +++ b/arch/sparc/include/asm/hvtramp.h @@ -0,0 +1,37 @@ +#ifndef _SPARC64_HVTRAP_H +#define _SPARC64_HVTRAP_H + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> + +struct hvtramp_mapping { + __u64 vaddr; + __u64 tte; +}; + +struct hvtramp_descr { + __u32 cpu; + __u32 num_mappings; + __u64 fault_info_va; + __u64 fault_info_pa; + __u64 thread_reg; + struct hvtramp_mapping maps[1]; +}; + +extern void hv_cpu_startup(unsigned long hvdescr_pa); + +#endif + +#define HVTRAMP_DESCR_CPU 0x00 +#define HVTRAMP_DESCR_NUM_MAPPINGS 0x04 +#define HVTRAMP_DESCR_FAULT_INFO_VA 0x08 +#define HVTRAMP_DESCR_FAULT_INFO_PA 0x10 +#define HVTRAMP_DESCR_THREAD_REG 0x18 +#define HVTRAMP_DESCR_MAPS 0x20 + +#define HVTRAMP_MAPPING_VADDR 0x00 +#define HVTRAMP_MAPPING_TTE 0x08 +#define HVTRAMP_MAPPING_SIZE 0x10 + +#endif /* _SPARC64_HVTRAP_H */ diff --git a/arch/sparc/include/asm/hw_irq.h b/arch/sparc/include/asm/hw_irq.h new file mode 100644 index 00000000000..8d30a7694be --- /dev/null +++ b/arch/sparc/include/asm/hw_irq.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SPARC_HW_IRQ_H +#define __ASM_SPARC_HW_IRQ_H + +/* Dummy include. */ + +#endif diff --git a/arch/sparc/include/asm/hypervisor.h b/arch/sparc/include/asm/hypervisor.h new file mode 100644 index 00000000000..109ae24ba24 --- /dev/null +++ b/arch/sparc/include/asm/hypervisor.h @@ -0,0 +1,2949 @@ +#ifndef _SPARC64_HYPERVISOR_H +#define _SPARC64_HYPERVISOR_H + +/* Sun4v hypervisor interfaces and defines. + * + * Hypervisor calls are made via traps to software traps number 0x80 + * and above. Registers %o0 to %o5 serve as argument, status, and + * return value registers. + * + * There are two kinds of these traps. First there are the normal + * "fast traps" which use software trap 0x80 and encode the function + * to invoke by number in register %o5. Argument and return value + * handling is as follows: + * + * ----------------------------------------------- + * | %o5 | function number | undefined | + * | %o0 | argument 0 | return status | + * | %o1 | argument 1 | return value 1 | + * | %o2 | argument 2 | return value 2 | + * | %o3 | argument 3 | return value 3 | + * | %o4 | argument 4 | return value 4 | + * ----------------------------------------------- + * + * The second type are "hyper-fast traps" which encode the function + * number in the software trap number itself. So these use trap + * numbers > 0x80. The register usage for hyper-fast traps is as + * follows: + * + * ----------------------------------------------- + * | %o0 | argument 0 | return status | + * | %o1 | argument 1 | return value 1 | + * | %o2 | argument 2 | return value 2 | + * | %o3 | argument 3 | return value 3 | + * | %o4 | argument 4 | return value 4 | + * ----------------------------------------------- + * + * Registers providing explicit arguments to the hypervisor calls + * are volatile across the call. Upon return their values are + * undefined unless explicitly specified as containing a particular + * return value by the specific call. The return status is always + * returned in register %o0, zero indicates a successful execution of + * the hypervisor call and other values indicate an error status as + * defined below. So, for example, if a hyper-fast trap takes + * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across + * the call and %o3, %o4, and %o5 would be preserved. + * + * If the hypervisor trap is invalid, or the fast trap function number + * is invalid, HV_EBADTRAP will be returned in %o0. Also, all 64-bits + * of the argument and return values are significant. + */ + +/* Trap numbers. */ +#define HV_FAST_TRAP 0x80 +#define HV_MMU_MAP_ADDR_TRAP 0x83 +#define HV_MMU_UNMAP_ADDR_TRAP 0x84 +#define HV_TTRACE_ADDENTRY_TRAP 0x85 +#define HV_CORE_TRAP 0xff + +/* Error codes. */ +#define HV_EOK 0 /* Successful return */ +#define HV_ENOCPU 1 /* Invalid CPU id */ +#define HV_ENORADDR 2 /* Invalid real address */ +#define HV_ENOINTR 3 /* Invalid interrupt id */ +#define HV_EBADPGSZ 4 /* Invalid pagesize encoding */ +#define HV_EBADTSB 5 /* Invalid TSB description */ +#define HV_EINVAL 6 /* Invalid argument */ +#define HV_EBADTRAP 7 /* Invalid function number */ +#define HV_EBADALIGN 8 /* Invalid address alignment */ +#define HV_EWOULDBLOCK 9 /* Cannot complete w/o blocking */ +#define HV_ENOACCESS 10 /* No access to resource */ +#define HV_EIO 11 /* I/O error */ +#define HV_ECPUERROR 12 /* CPU in error state */ +#define HV_ENOTSUPPORTED 13 /* Function not supported */ +#define HV_ENOMAP 14 /* No mapping found */ +#define HV_ETOOMANY 15 /* Too many items specified */ +#define HV_ECHANNEL 16 /* Invalid LDC channel */ +#define HV_EBUSY 17 /* Resource busy */ + +/* mach_exit() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_EXIT + * ARG0: exit code + * ERRORS: This service does not return. + * + * Stop all CPUs in the virtual domain and place them into the stopped + * state. The 64-bit exit code may be passed to a service entity as + * the domain's exit status. On systems without a service entity, the + * domain will undergo a reset, and the boot firmware will be + * reloaded. + * + * This function will never return to the guest that invokes it. + * + * Note: By convention an exit code of zero denotes a successful exit by + * the guest code. A non-zero exit code denotes a guest specific + * error indication. + * + */ +#define HV_FAST_MACH_EXIT 0x00 + +#ifndef __ASSEMBLY__ +extern void sun4v_mach_exit(unsigned long exit_code); +#endif + +/* Domain services. */ + +/* mach_desc() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_DESC + * ARG0: buffer + * ARG1: length + * RET0: status + * RET1: length + * ERRORS: HV_EBADALIGN Buffer is badly aligned + * HV_ENORADDR Buffer is to an illegal real address. + * HV_EINVAL Buffer length is too small for complete + * machine description. + * + * Copy the most current machine description into the buffer indicated + * by the real address in ARG0. The buffer provided must be 16 byte + * aligned. Upon success or HV_EINVAL, this service returns the + * actual size of the machine description in the RET1 return value. + * + * Note: A method of determining the appropriate buffer size for the + * machine description is to first call this service with a buffer + * length of 0 bytes. + */ +#define HV_FAST_MACH_DESC 0x01 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mach_desc(unsigned long buffer_pa, + unsigned long buf_len, + unsigned long *real_buf_len); +#endif + +/* mach_sir() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_SIR + * ERRORS: This service does not return. + * + * Perform a software initiated reset of the virtual machine domain. + * All CPUs are captured as soon as possible, all hardware devices are + * returned to the entry default state, and the domain is restarted at + * the SIR (trap type 0x04) real trap table (RTBA) entry point on one + * of the CPUs. The single CPU restarted is selected as determined by + * platform specific policy. Memory is preserved across this + * operation. + */ +#define HV_FAST_MACH_SIR 0x02 + +#ifndef __ASSEMBLY__ +extern void sun4v_mach_sir(void); +#endif + +/* mach_set_watchdog() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_SET_WATCHDOG + * ARG0: timeout in milliseconds + * RET0: status + * RET1: time remaining in milliseconds + * + * A guest uses this API to set a watchdog timer. Once the gues has set + * the timer, it must call the timer service again either to disable or + * postpone the expiration. If the timer expires before being reset or + * disabled, then the hypervisor take a platform specific action leading + * to guest termination within a bounded time period. The platform action + * may include recovery actions such as reporting the expiration to a + * Service Processor, and/or automatically restarting the gues. + * + * The 'timeout' parameter is specified in milliseconds, however the + * implementated granularity is given by the 'watchdog-resolution' + * property in the 'platform' node of the guest's machine description. + * The largest allowed timeout value is specified by the + * 'watchdog-max-timeout' property of the 'platform' node. + * + * If the 'timeout' argument is not zero, the watchdog timer is set to + * expire after a minimum of 'timeout' milliseconds. + * + * If the 'timeout' argument is zero, the watchdog timer is disabled. + * + * If the 'timeout' value exceeds the value of the 'max-watchdog-timeout' + * property, the hypervisor leaves the watchdog timer state unchanged, + * and returns a status of EINVAL. + * + * The 'time remaining' return value is valid regardless of whether the + * return status is EOK or EINVAL. A non-zero return value indicates the + * number of milliseconds that were remaining until the timer was to expire. + * If less than one millisecond remains, the return value is '1'. If the + * watchdog timer was disabled at the time of the call, the return value is + * zero. + * + * If the hypervisor cannot support the exact timeout value requested, but + * can support a larger timeout value, the hypervisor may round the actual + * timeout to a value larger than the requested timeout, consequently the + * 'time remaining' return value may be larger than the previously requested + * timeout value. + * + * Any guest OS debugger should be aware that the watchdog service may be in + * use. Consequently, it is recommended that the watchdog service is + * disabled upon debugger entry (e.g. reaching a breakpoint), and then + * re-enabled upon returning to normal execution. The API has been designed + * with this in mind, and the 'time remaining' result of the disable call may + * be used directly as the timeout argument of the re-enable call. + */ +#define HV_FAST_MACH_SET_WATCHDOG 0x05 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mach_set_watchdog(unsigned long timeout, + unsigned long *orig_timeout); +#endif + +/* CPU services. + * + * CPUs represent devices that can execute software threads. A single + * chip that contains multiple cores or strands is represented as + * multiple CPUs with unique CPU identifiers. CPUs are exported to + * OBP via the machine description (and to the OS via the OBP device + * tree). CPUs are always in one of three states: stopped, running, + * or error. + * + * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a + * CPU within a logical domain. Operations that are to be performed + * on multiple CPUs specify them via a CPU list. A CPU list is an + * array in real memory, of which each 16-bit word is a CPU ID. CPU + * lists are passed through the API as two arguments. The first is + * the number of entries (16-bit words) in the CPU list, and the + * second is the (real address) pointer to the CPU ID list. + */ + +/* cpu_start() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_START + * ARG0: CPU ID + * ARG1: PC + * ARG2: RTBA + * ARG3: target ARG0 + * RET0: status + * ERRORS: ENOCPU Invalid CPU ID + * EINVAL Target CPU ID is not in the stopped state + * ENORADDR Invalid PC or RTBA real address + * EBADALIGN Unaligned PC or unaligned RTBA + * EWOULDBLOCK Starting resources are not available + * + * Start CPU with given CPU ID with PC in %pc and with a real trap + * base address value of RTBA. The indicated CPU must be in the + * stopped state. The supplied RTBA must be aligned on a 256 byte + * boundary. On successful completion, the specified CPU will be in + * the running state and will be supplied with "target ARG0" in %o0 + * and RTBA in %tba. + */ +#define HV_FAST_CPU_START 0x10 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_start(unsigned long cpuid, + unsigned long pc, + unsigned long rtba, + unsigned long arg0); +#endif + +/* cpu_stop() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_STOP + * ARG0: CPU ID + * RET0: status + * ERRORS: ENOCPU Invalid CPU ID + * EINVAL Target CPU ID is the current cpu + * EINVAL Target CPU ID is not in the running state + * EWOULDBLOCK Stopping resources are not available + * ENOTSUPPORTED Not supported on this platform + * + * The specified CPU is stopped. The indicated CPU must be in the + * running state. On completion, it will be in the stopped state. It + * is not legal to stop the current CPU. + * + * Note: As this service cannot be used to stop the current cpu, this service + * may not be used to stop the last running CPU in a domain. To stop + * and exit a running domain, a guest must use the mach_exit() service. + */ +#define HV_FAST_CPU_STOP 0x11 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_stop(unsigned long cpuid); +#endif + +/* cpu_yield() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_YIELD + * RET0: status + * ERRORS: No possible error. + * + * Suspend execution on the current CPU. Execution will resume when + * an interrupt (device, %stick_compare, or cross-call) is targeted to + * the CPU. On some CPUs, this API may be used by the hypervisor to + * save power by disabling hardware strands. + */ +#define HV_FAST_CPU_YIELD 0x12 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_yield(void); +#endif + +/* cpu_qconf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_QCONF + * ARG0: queue + * ARG1: base real address + * ARG2: number of entries + * RET0: status + * ERRORS: ENORADDR Invalid base real address + * EINVAL Invalid queue or number of entries is less + * than 2 or too large. + * EBADALIGN Base real address is not correctly aligned + * for size. + * + * Configure the given queue to be placed at the given base real + * address, with the given number of entries. The number of entries + * must be a power of 2. The base real address must be aligned + * exactly to match the queue size. Each queue entry is 64 bytes + * long, so for example a 32 entry queue must be aligned on a 2048 + * byte real address boundary. + * + * The specified queue is unconfigured if the number of entries is given + * as zero. + * + * For the current version of this API service, the argument queue is defined + * as follows: + * + * queue description + * ----- ------------------------- + * 0x3c cpu mondo queue + * 0x3d device mondo queue + * 0x3e resumable error queue + * 0x3f non-resumable error queue + * + * Note: The maximum number of entries for each queue for a specific cpu may + * be determined from the machine description. + */ +#define HV_FAST_CPU_QCONF 0x14 +#define HV_CPU_QUEUE_CPU_MONDO 0x3c +#define HV_CPU_QUEUE_DEVICE_MONDO 0x3d +#define HV_CPU_QUEUE_RES_ERROR 0x3e +#define HV_CPU_QUEUE_NONRES_ERROR 0x3f + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_qconf(unsigned long type, + unsigned long queue_paddr, + unsigned long num_queue_entries); +#endif + +/* cpu_qinfo() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_QINFO + * ARG0: queue + * RET0: status + * RET1: base real address + * RET1: number of entries + * ERRORS: EINVAL Invalid queue + * + * Return the configuration info for the given queue. The base real + * address and number of entries of the defined queue are returned. + * The queue argument values are the same as for cpu_qconf() above. + * + * If the specified queue is a valid queue number, but no queue has + * been defined, the number of entries will be set to zero and the + * base real address returned is undefined. + */ +#define HV_FAST_CPU_QINFO 0x15 + +/* cpu_mondo_send() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_MONDO_SEND + * ARG0-1: CPU list + * ARG2: data real address + * RET0: status + * ERRORS: EBADALIGN Mondo data is not 64-byte aligned or CPU list + * is not 2-byte aligned. + * ENORADDR Invalid data mondo address, or invalid cpu list + * address. + * ENOCPU Invalid cpu in CPU list + * EWOULDBLOCK Some or all of the listed CPUs did not receive + * the mondo + * ECPUERROR One or more of the listed CPUs are in error + * state, use HV_FAST_CPU_STATE to see which ones + * EINVAL CPU list includes caller's CPU ID + * + * Send a mondo interrupt to the CPUs in the given CPU list with the + * 64-bytes at the given data real address. The data must be 64-byte + * aligned. The mondo data will be delivered to the cpu_mondo queues + * of the recipient CPUs. + * + * In all cases, error or not, the CPUs in the CPU list to which the + * mondo has been successfully delivered will be indicated by having + * their entry in CPU list updated with the value 0xffff. + */ +#define HV_FAST_CPU_MONDO_SEND 0x42 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_mondo_send(unsigned long cpu_count, unsigned long cpu_list_pa, unsigned long mondo_block_pa); +#endif + +/* cpu_myid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_MYID + * RET0: status + * RET1: CPU ID + * ERRORS: No errors defined. + * + * Return the hypervisor ID handle for the current CPU. Use by a + * virtual CPU to discover it's own identity. + */ +#define HV_FAST_CPU_MYID 0x16 + +/* cpu_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_STATE + * ARG0: CPU ID + * RET0: status + * RET1: state + * ERRORS: ENOCPU Invalid CPU ID + * + * Retrieve the current state of the CPU with the given CPU ID. + */ +#define HV_FAST_CPU_STATE 0x17 +#define HV_CPU_STATE_STOPPED 0x01 +#define HV_CPU_STATE_RUNNING 0x02 +#define HV_CPU_STATE_ERROR 0x03 + +#ifndef __ASSEMBLY__ +extern long sun4v_cpu_state(unsigned long cpuid); +#endif + +/* cpu_set_rtba() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_SET_RTBA + * ARG0: RTBA + * RET0: status + * RET1: previous RTBA + * ERRORS: ENORADDR Invalid RTBA real address + * EBADALIGN RTBA is incorrectly aligned for a trap table + * + * Set the real trap base address of the local cpu to the given RTBA. + * The supplied RTBA must be aligned on a 256 byte boundary. Upon + * success the previous value of the RTBA is returned in RET1. + * + * Note: This service does not affect %tba + */ +#define HV_FAST_CPU_SET_RTBA 0x18 + +/* cpu_set_rtba() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_GET_RTBA + * RET0: status + * RET1: previous RTBA + * ERRORS: No possible error. + * + * Returns the current value of RTBA in RET1. + */ +#define HV_FAST_CPU_GET_RTBA 0x19 + +/* MMU services. + * + * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls. + */ +#ifndef __ASSEMBLY__ +struct hv_tsb_descr { + unsigned short pgsz_idx; + unsigned short assoc; + unsigned int num_ttes; /* in TTEs */ + unsigned int ctx_idx; + unsigned int pgsz_mask; + unsigned long tsb_base; + unsigned long resv; +}; +#endif +#define HV_TSB_DESCR_PGSZ_IDX_OFFSET 0x00 +#define HV_TSB_DESCR_ASSOC_OFFSET 0x02 +#define HV_TSB_DESCR_NUM_TTES_OFFSET 0x04 +#define HV_TSB_DESCR_CTX_IDX_OFFSET 0x08 +#define HV_TSB_DESCR_PGSZ_MASK_OFFSET 0x0c +#define HV_TSB_DESCR_TSB_BASE_OFFSET 0x10 +#define HV_TSB_DESCR_RESV_OFFSET 0x18 + +/* Page size bitmask. */ +#define HV_PGSZ_MASK_8K (1 << 0) +#define HV_PGSZ_MASK_64K (1 << 1) +#define HV_PGSZ_MASK_512K (1 << 2) +#define HV_PGSZ_MASK_4MB (1 << 3) +#define HV_PGSZ_MASK_32MB (1 << 4) +#define HV_PGSZ_MASK_256MB (1 << 5) +#define HV_PGSZ_MASK_2GB (1 << 6) +#define HV_PGSZ_MASK_16GB (1 << 7) + +/* Page size index. The value given in the TSB descriptor must correspond + * to the smallest page size specified in the pgsz_mask page size bitmask. + */ +#define HV_PGSZ_IDX_8K 0 +#define HV_PGSZ_IDX_64K 1 +#define HV_PGSZ_IDX_512K 2 +#define HV_PGSZ_IDX_4MB 3 +#define HV_PGSZ_IDX_32MB 4 +#define HV_PGSZ_IDX_256MB 5 +#define HV_PGSZ_IDX_2GB 6 +#define HV_PGSZ_IDX_16GB 7 + +/* MMU fault status area. + * + * MMU related faults have their status and fault address information + * placed into a memory region made available by privileged code. Each + * virtual processor must make a mmu_fault_area_conf() call to tell the + * hypervisor where that processor's fault status should be stored. + * + * The fault status block is a multiple of 64-bytes and must be aligned + * on a 64-byte boundary. + */ +#ifndef __ASSEMBLY__ +struct hv_fault_status { + unsigned long i_fault_type; + unsigned long i_fault_addr; + unsigned long i_fault_ctx; + unsigned long i_reserved[5]; + unsigned long d_fault_type; + unsigned long d_fault_addr; + unsigned long d_fault_ctx; + unsigned long d_reserved[5]; +}; +#endif +#define HV_FAULT_I_TYPE_OFFSET 0x00 +#define HV_FAULT_I_ADDR_OFFSET 0x08 +#define HV_FAULT_I_CTX_OFFSET 0x10 +#define HV_FAULT_D_TYPE_OFFSET 0x40 +#define HV_FAULT_D_ADDR_OFFSET 0x48 +#define HV_FAULT_D_CTX_OFFSET 0x50 + +#define HV_FAULT_TYPE_FAST_MISS 1 +#define HV_FAULT_TYPE_FAST_PROT 2 +#define HV_FAULT_TYPE_MMU_MISS 3 +#define HV_FAULT_TYPE_INV_RA 4 +#define HV_FAULT_TYPE_PRIV_VIOL 5 +#define HV_FAULT_TYPE_PROT_VIOL 6 +#define HV_FAULT_TYPE_NFO 7 +#define HV_FAULT_TYPE_NFO_SEFF 8 +#define HV_FAULT_TYPE_INV_VA 9 +#define HV_FAULT_TYPE_INV_ASI 10 +#define HV_FAULT_TYPE_NC_ATOMIC 11 +#define HV_FAULT_TYPE_PRIV_ACT 12 +#define HV_FAULT_TYPE_RESV1 13 +#define HV_FAULT_TYPE_UNALIGNED 14 +#define HV_FAULT_TYPE_INV_PGSZ 15 +/* Values 16 --> -2 are reserved. */ +#define HV_FAULT_TYPE_MULTIPLE -1 + +/* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(), + * and mmu_{map,unmap}_perm_addr(). + */ +#define HV_MMU_DMMU 0x01 +#define HV_MMU_IMMU 0x02 +#define HV_MMU_ALL (HV_MMU_DMMU | HV_MMU_IMMU) + +/* mmu_map_addr() + * TRAP: HV_MMU_MAP_ADDR_TRAP + * ARG0: virtual address + * ARG1: mmu context + * ARG2: TTE + * ARG3: flags (HV_MMU_{IMMU,DMMU}) + * ERRORS: EINVAL Invalid virtual address, mmu context, or flags + * EBADPGSZ Invalid page size value + * ENORADDR Invalid real address in TTE + * + * Create a non-permanent mapping using the given TTE, virtual + * address, and mmu context. The flags argument determines which + * (data, or instruction, or both) TLB the mapping gets loaded into. + * + * The behavior is undefined if the valid bit is clear in the TTE. + * + * Note: This API call is for privileged code to specify temporary translation + * mappings without the need to create and manage a TSB. + */ + +/* mmu_unmap_addr() + * TRAP: HV_MMU_UNMAP_ADDR_TRAP + * ARG0: virtual address + * ARG1: mmu context + * ARG2: flags (HV_MMU_{IMMU,DMMU}) + * ERRORS: EINVAL Invalid virtual address, mmu context, or flags + * + * Demaps the given virtual address in the given mmu context on this + * CPU. This function is intended to be used to demap pages mapped + * with mmu_map_addr. This service is equivalent to invoking + * mmu_demap_page() with only the current CPU in the CPU list. The + * flags argument determines which (data, or instruction, or both) TLB + * the mapping gets unmapped from. + * + * Attempting to perform an unmap operation for a previously defined + * permanent mapping will have undefined results. + */ + +/* mmu_tsb_ctx0() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_TSB_CTX0 + * ARG0: number of TSB descriptions + * ARG1: TSB descriptions pointer + * RET0: status + * ERRORS: ENORADDR Invalid TSB descriptions pointer or + * TSB base within a descriptor + * EBADALIGN TSB descriptions pointer is not aligned + * to an 8-byte boundary, or TSB base + * within a descriptor is not aligned for + * the given TSB size + * EBADPGSZ Invalid page size in a TSB descriptor + * EBADTSB Invalid associativity or size in a TSB + * descriptor + * EINVAL Invalid number of TSB descriptions, or + * invalid context index in a TSB + * descriptor, or index page size not + * equal to smallest page size in page + * size bitmask field. + * + * Configures the TSBs for the current CPU for virtual addresses with + * context zero. The TSB descriptions pointer is a pointer to an + * array of the given number of TSB descriptions. + * + * Note: The maximum number of TSBs available to a virtual CPU is given by the + * mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the + * machine description. + */ +#define HV_FAST_MMU_TSB_CTX0 0x20 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions, + unsigned long tsb_desc_ra); +#endif + +/* mmu_tsb_ctxnon0() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_TSB_CTXNON0 + * ARG0: number of TSB descriptions + * ARG1: TSB descriptions pointer + * RET0: status + * ERRORS: Same as for mmu_tsb_ctx0() above. + * + * Configures the TSBs for the current CPU for virtual addresses with + * non-zero contexts. The TSB descriptions pointer is a pointer to an + * array of the given number of TSB descriptions. + * + * Note: A maximum of 16 TSBs may be specified in the TSB description list. + */ +#define HV_FAST_MMU_TSB_CTXNON0 0x21 + +/* mmu_demap_page() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_DEMAP_PAGE + * ARG0: reserved, must be zero + * ARG1: reserved, must be zero + * ARG2: virtual address + * ARG3: mmu context + * ARG4: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid virutal address, context, or + * flags value + * ENOTSUPPORTED ARG0 or ARG1 is non-zero + * + * Demaps any page mapping of the given virtual address in the given + * mmu context for the current virtual CPU. Any virtually tagged + * caches are guaranteed to be kept consistent. The flags argument + * determines which TLB (instruction, or data, or both) participate in + * the operation. + * + * ARG0 and ARG1 are both reserved and must be set to zero. + */ +#define HV_FAST_MMU_DEMAP_PAGE 0x22 + +/* mmu_demap_ctx() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_DEMAP_CTX + * ARG0: reserved, must be zero + * ARG1: reserved, must be zero + * ARG2: mmu context + * ARG3: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid context or flags value + * ENOTSUPPORTED ARG0 or ARG1 is non-zero + * + * Demaps all non-permanent virtual page mappings previously specified + * for the given context for the current virtual CPU. Any virtual + * tagged caches are guaranteed to be kept consistent. The flags + * argument determines which TLB (instruction, or data, or both) + * participate in the operation. + * + * ARG0 and ARG1 are both reserved and must be set to zero. + */ +#define HV_FAST_MMU_DEMAP_CTX 0x23 + +/* mmu_demap_all() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_DEMAP_ALL + * ARG0: reserved, must be zero + * ARG1: reserved, must be zero + * ARG2: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid flags value + * ENOTSUPPORTED ARG0 or ARG1 is non-zero + * + * Demaps all non-permanent virtual page mappings previously specified + * for the current virtual CPU. Any virtual tagged caches are + * guaranteed to be kept consistent. The flags argument determines + * which TLB (instruction, or data, or both) participate in the + * operation. + * + * ARG0 and ARG1 are both reserved and must be set to zero. + */ +#define HV_FAST_MMU_DEMAP_ALL 0x24 + +#ifndef __ASSEMBLY__ +extern void sun4v_mmu_demap_all(void); +#endif + +/* mmu_map_perm_addr() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_MAP_PERM_ADDR + * ARG0: virtual address + * ARG1: reserved, must be zero + * ARG2: TTE + * ARG3: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid virutal address or flags value + * EBADPGSZ Invalid page size value + * ENORADDR Invalid real address in TTE + * ETOOMANY Too many mappings (max of 8 reached) + * + * Create a permanent mapping using the given TTE and virtual address + * for context 0 on the calling virtual CPU. A maximum of 8 such + * permanent mappings may be specified by privileged code. Mappings + * may be removed with mmu_unmap_perm_addr(). + * + * The behavior is undefined if a TTE with the valid bit clear is given. + * + * Note: This call is used to specify address space mappings for which + * privileged code does not expect to receive misses. For example, + * this mechanism can be used to map kernel nucleus code and data. + */ +#define HV_FAST_MMU_MAP_PERM_ADDR 0x25 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr, + unsigned long set_to_zero, + unsigned long tte, + unsigned long flags); +#endif + +/* mmu_fault_area_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_FAULT_AREA_CONF + * ARG0: real address + * RET0: status + * RET1: previous mmu fault area real address + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Invalid alignment for fault area + * + * Configure the MMU fault status area for the calling CPU. A 64-byte + * aligned real address specifies where MMU fault status information + * is placed. The return value is the previously specified area, or 0 + * for the first invocation. Specifying a fault area at real address + * 0 is not allowed. + */ +#define HV_FAST_MMU_FAULT_AREA_CONF 0x26 + +/* mmu_enable() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_ENABLE + * ARG0: enable flag + * ARG1: return target address + * RET0: status + * ERRORS: ENORADDR Invalid real address when disabling + * translation. + * EBADALIGN The return target address is not + * aligned to an instruction. + * EINVAL The enable flag request the current + * operating mode (e.g. disable if already + * disabled) + * + * Enable or disable virtual address translation for the calling CPU + * within the virtual machine domain. If the enable flag is zero, + * translation is disabled, any non-zero value will enable + * translation. + * + * When this function returns, the newly selected translation mode + * will be active. If the mmu is being enabled, then the return + * target address is a virtual address else it is a real address. + * + * Upon successful completion, control will be returned to the given + * return target address (ie. the cpu will jump to that address). On + * failure, the previous mmu mode remains and the trap simply returns + * as normal with the appropriate error code in RET0. + */ +#define HV_FAST_MMU_ENABLE 0x27 + +/* mmu_unmap_perm_addr() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_UNMAP_PERM_ADDR + * ARG0: virtual address + * ARG1: reserved, must be zero + * ARG2: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid virutal address or flags value + * ENOMAP Specified mapping was not found + * + * Demaps any permanent page mapping (established via + * mmu_map_perm_addr()) at the given virtual address for context 0 on + * the current virtual CPU. Any virtual tagged caches are guaranteed + * to be kept consistent. + */ +#define HV_FAST_MMU_UNMAP_PERM_ADDR 0x28 + +/* mmu_tsb_ctx0_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_TSB_CTX0_INFO + * ARG0: max TSBs + * ARG1: buffer pointer + * RET0: status + * RET1: number of TSBs + * ERRORS: EINVAL Supplied buffer is too small + * EBADALIGN The buffer pointer is badly aligned + * ENORADDR Invalid real address for buffer pointer + * + * Return the TSB configuration as previous defined by mmu_tsb_ctx0() + * into the provided buffer. The size of the buffer is given in ARG1 + * in terms of the number of TSB description entries. + * + * Upon return, RET1 always contains the number of TSB descriptions + * previously configured. If zero TSBs were configured, EOK is + * returned with RET1 containing 0. + */ +#define HV_FAST_MMU_TSB_CTX0_INFO 0x29 + +/* mmu_tsb_ctxnon0_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_TSB_CTXNON0_INFO + * ARG0: max TSBs + * ARG1: buffer pointer + * RET0: status + * RET1: number of TSBs + * ERRORS: EINVAL Supplied buffer is too small + * EBADALIGN The buffer pointer is badly aligned + * ENORADDR Invalid real address for buffer pointer + * + * Return the TSB configuration as previous defined by + * mmu_tsb_ctxnon0() into the provided buffer. The size of the buffer + * is given in ARG1 in terms of the number of TSB description entries. + * + * Upon return, RET1 always contains the number of TSB descriptions + * previously configured. If zero TSBs were configured, EOK is + * returned with RET1 containing 0. + */ +#define HV_FAST_MMU_TSB_CTXNON0_INFO 0x2a + +/* mmu_fault_area_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_FAULT_AREA_INFO + * RET0: status + * RET1: fault area real address + * ERRORS: No errors defined. + * + * Return the currently defined MMU fault status area for the current + * CPU. The real address of the fault status area is returned in + * RET1, or 0 is returned in RET1 if no fault status area is defined. + * + * Note: mmu_fault_area_conf() may be called with the return value (RET1) + * from this service if there is a need to save and restore the fault + * area for a cpu. + */ +#define HV_FAST_MMU_FAULT_AREA_INFO 0x2b + +/* Cache and Memory services. */ + +/* mem_scrub() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MEM_SCRUB + * ARG0: real address + * ARG1: length + * RET0: status + * RET1: length scrubbed + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Start address or length are not correctly + * aligned + * EINVAL Length is zero + * + * Zero the memory contents in the range real address to real address + * plus length minus 1. Also, valid ECC will be generated for that + * memory address range. Scrubbing is started at the given real + * address, but may not scrub the entire given length. The actual + * length scrubbed will be returned in RET1. + * + * The real address and length must be aligned on an 8K boundary, or + * contain the start address and length from a sun4v error report. + * + * Note: There are two uses for this function. The first use is to block clear + * and initialize memory and the second is to scrub an u ncorrectable + * error reported via a resumable or non-resumable trap. The second + * use requires the arguments to be equal to the real address and length + * provided in a sun4v memory error report. + */ +#define HV_FAST_MEM_SCRUB 0x31 + +/* mem_sync() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MEM_SYNC + * ARG0: real address + * ARG1: length + * RET0: status + * RET1: length synced + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Start address or length are not correctly + * aligned + * EINVAL Length is zero + * + * Force the next access within the real address to real address plus + * length minus 1 to be fetches from main system memory. Less than + * the given length may be synced, the actual amount synced is + * returned in RET1. The real address and length must be aligned on + * an 8K boundary. + */ +#define HV_FAST_MEM_SYNC 0x32 + +/* Time of day services. + * + * The hypervisor maintains the time of day on a per-domain basis. + * Changing the time of day in one domain does not affect the time of + * day on any other domain. + * + * Time is described by a single unsigned 64-bit word which is the + * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1, + * 1970). + */ + +/* tod_get() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TOD_GET + * RET0: status + * RET1: TOD + * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable + * ENOTSUPPORTED If TOD not supported on this platform + * + * Return the current time of day. May block if TOD access is + * temporarily not possible. + */ +#define HV_FAST_TOD_GET 0x50 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_tod_get(unsigned long *time); +#endif + +/* tod_set() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TOD_SET + * ARG0: TOD + * RET0: status + * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable + * ENOTSUPPORTED If TOD not supported on this platform + * + * The current time of day is set to the value specified in ARG0. May + * block if TOD access is temporarily not possible. + */ +#define HV_FAST_TOD_SET 0x51 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_tod_set(unsigned long time); +#endif + +/* Console services */ + +/* con_getchar() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CONS_GETCHAR + * RET0: status + * RET1: character + * ERRORS: EWOULDBLOCK No character available. + * + * Returns a character from the console device. If no character is + * available then an EWOULDBLOCK error is returned. If a character is + * available, then the returned status is EOK and the character value + * is in RET1. + * + * A virtual BREAK is represented by the 64-bit value -1. + * + * A virtual HUP signal is represented by the 64-bit value -2. + */ +#define HV_FAST_CONS_GETCHAR 0x60 + +/* con_putchar() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CONS_PUTCHAR + * ARG0: character + * RET0: status + * ERRORS: EINVAL Illegal character + * EWOULDBLOCK Output buffer currently full, would block + * + * Send a character to the console device. Only character values + * between 0 and 255 may be used. Values outside this range are + * invalid except for the 64-bit value -1 which is used to send a + * virtual BREAK. + */ +#define HV_FAST_CONS_PUTCHAR 0x61 + +/* con_read() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CONS_READ + * ARG0: buffer real address + * ARG1: buffer size in bytes + * RET0: status + * RET1: bytes read or BREAK or HUP + * ERRORS: EWOULDBLOCK No character available. + * + * Reads characters into a buffer from the console device. If no + * character is available then an EWOULDBLOCK error is returned. + * If a character is available, then the returned status is EOK + * and the number of bytes read into the given buffer is provided + * in RET1. + * + * A virtual BREAK is represented by the 64-bit RET1 value -1. + * + * A virtual HUP signal is represented by the 64-bit RET1 value -2. + * + * If BREAK or HUP are indicated, no bytes were read into buffer. + */ +#define HV_FAST_CONS_READ 0x62 + +/* con_write() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CONS_WRITE + * ARG0: buffer real address + * ARG1: buffer size in bytes + * RET0: status + * RET1: bytes written + * ERRORS: EWOULDBLOCK Output buffer currently full, would block + * + * Send a characters in buffer to the console device. Breaks must be + * sent using con_putchar(). + */ +#define HV_FAST_CONS_WRITE 0x63 + +#ifndef __ASSEMBLY__ +extern long sun4v_con_getchar(long *status); +extern long sun4v_con_putchar(long c); +extern long sun4v_con_read(unsigned long buffer, + unsigned long size, + unsigned long *bytes_read); +extern unsigned long sun4v_con_write(unsigned long buffer, + unsigned long size, + unsigned long *bytes_written); +#endif + +/* mach_set_soft_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE + * ARG0: software state + * ARG1: software state description pointer + * RET0: status + * ERRORS: EINVAL software state not valid or software state + * description is not NULL terminated + * ENORADDR software state description pointer is not a + * valid real address + * EBADALIGNED software state description is not correctly + * aligned + * + * This allows the guest to report it's soft state to the hypervisor. There + * are two primary components to this state. The first part states whether + * the guest software is running or not. The second containts optional + * details specific to the software. + * + * The software state argument is defined below in HV_SOFT_STATE_*, and + * indicates whether the guest is operating normally or in a transitional + * state. + * + * The software state description argument is a real address of a data buffer + * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL + * terminated 7-bit ASCII string of up to 31 characters not including the + * NULL termination. + */ +#define HV_FAST_MACH_SET_SOFT_STATE 0x70 +#define HV_SOFT_STATE_NORMAL 0x01 +#define HV_SOFT_STATE_TRANSITION 0x02 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state, + unsigned long msg_string_ra); +#endif + +/* mach_get_soft_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE + * ARG0: software state description pointer + * RET0: status + * RET1: software state + * ERRORS: ENORADDR software state description pointer is not a + * valid real address + * EBADALIGNED software state description is not correctly + * aligned + * + * Retrieve the current value of the guest's software state. The rules + * for the software state pointer are the same as for mach_set_soft_state() + * above. + */ +#define HV_FAST_MACH_GET_SOFT_STATE 0x71 + +/* svc_send() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SVC_SEND + * ARG0: service ID + * ARG1: buffer real address + * ARG2: buffer size + * RET0: STATUS + * RET1: sent_bytes + * + * Be careful, all output registers are clobbered by this operation, + * so for example it is not possible to save away a value in %o4 + * across the trap. + */ +#define HV_FAST_SVC_SEND 0x80 + +/* svc_recv() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SVC_RECV + * ARG0: service ID + * ARG1: buffer real address + * ARG2: buffer size + * RET0: STATUS + * RET1: recv_bytes + * + * Be careful, all output registers are clobbered by this operation, + * so for example it is not possible to save away a value in %o4 + * across the trap. + */ +#define HV_FAST_SVC_RECV 0x81 + +/* svc_getstatus() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SVC_GETSTATUS + * ARG0: service ID + * RET0: STATUS + * RET1: status bits + */ +#define HV_FAST_SVC_GETSTATUS 0x82 + +/* svc_setstatus() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SVC_SETSTATUS + * ARG0: service ID + * ARG1: bits to set + * RET0: STATUS + */ +#define HV_FAST_SVC_SETSTATUS 0x83 + +/* svc_clrstatus() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SVC_CLRSTATUS + * ARG0: service ID + * ARG1: bits to clear + * RET0: STATUS + */ +#define HV_FAST_SVC_CLRSTATUS 0x84 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_svc_send(unsigned long svc_id, + unsigned long buffer, + unsigned long buffer_size, + unsigned long *sent_bytes); +extern unsigned long sun4v_svc_recv(unsigned long svc_id, + unsigned long buffer, + unsigned long buffer_size, + unsigned long *recv_bytes); +extern unsigned long sun4v_svc_getstatus(unsigned long svc_id, + unsigned long *status_bits); +extern unsigned long sun4v_svc_setstatus(unsigned long svc_id, + unsigned long status_bits); +extern unsigned long sun4v_svc_clrstatus(unsigned long svc_id, + unsigned long status_bits); +#endif + +/* Trap trace services. + * + * The hypervisor provides a trap tracing capability for privileged + * code running on each virtual CPU. Privileged code provides a + * round-robin trap trace queue within which the hypervisor writes + * 64-byte entries detailing hyperprivileged traps taken n behalf of + * privileged code. This is provided as a debugging capability for + * privileged code. + * + * The trap trace control structure is 64-bytes long and placed at the + * start (offset 0) of the trap trace buffer, and is described as + * follows: + */ +#ifndef __ASSEMBLY__ +struct hv_trap_trace_control { + unsigned long head_offset; + unsigned long tail_offset; + unsigned long __reserved[0x30 / sizeof(unsigned long)]; +}; +#endif +#define HV_TRAP_TRACE_CTRL_HEAD_OFFSET 0x00 +#define HV_TRAP_TRACE_CTRL_TAIL_OFFSET 0x08 + +/* The head offset is the offset of the most recently completed entry + * in the trap-trace buffer. The tail offset is the offset of the + * next entry to be written. The control structure is owned and + * modified by the hypervisor. A guest may not modify the control + * structure contents. Attempts to do so will result in undefined + * behavior for the guest. + * + * Each trap trace buffer entry is layed out as follows: + */ +#ifndef __ASSEMBLY__ +struct hv_trap_trace_entry { + unsigned char type; /* Hypervisor or guest entry? */ + unsigned char hpstate; /* Hyper-privileged state */ + unsigned char tl; /* Trap level */ + unsigned char gl; /* Global register level */ + unsigned short tt; /* Trap type */ + unsigned short tag; /* Extended trap identifier */ + unsigned long tstate; /* Trap state */ + unsigned long tick; /* Tick */ + unsigned long tpc; /* Trap PC */ + unsigned long f1; /* Entry specific */ + unsigned long f2; /* Entry specific */ + unsigned long f3; /* Entry specific */ + unsigned long f4; /* Entry specific */ +}; +#endif +#define HV_TRAP_TRACE_ENTRY_TYPE 0x00 +#define HV_TRAP_TRACE_ENTRY_HPSTATE 0x01 +#define HV_TRAP_TRACE_ENTRY_TL 0x02 +#define HV_TRAP_TRACE_ENTRY_GL 0x03 +#define HV_TRAP_TRACE_ENTRY_TT 0x04 +#define HV_TRAP_TRACE_ENTRY_TAG 0x06 +#define HV_TRAP_TRACE_ENTRY_TSTATE 0x08 +#define HV_TRAP_TRACE_ENTRY_TICK 0x10 +#define HV_TRAP_TRACE_ENTRY_TPC 0x18 +#define HV_TRAP_TRACE_ENTRY_F1 0x20 +#define HV_TRAP_TRACE_ENTRY_F2 0x28 +#define HV_TRAP_TRACE_ENTRY_F3 0x30 +#define HV_TRAP_TRACE_ENTRY_F4 0x38 + +/* The type field is encoded as follows. */ +#define HV_TRAP_TYPE_UNDEF 0x00 /* Entry content undefined */ +#define HV_TRAP_TYPE_HV 0x01 /* Hypervisor trap entry */ +#define HV_TRAP_TYPE_GUEST 0xff /* Added via ttrace_addentry() */ + +/* ttrace_buf_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TTRACE_BUF_CONF + * ARG0: real address + * ARG1: number of entries + * RET0: status + * RET1: number of entries + * ERRORS: ENORADDR Invalid real address + * EINVAL Size is too small + * EBADALIGN Real address not aligned on 64-byte boundary + * + * Requests hypervisor trap tracing and declares a virtual CPU's trap + * trace buffer to the hypervisor. The real address supplies the real + * base address of the trap trace queue and must be 64-byte aligned. + * Specifying a value of 0 for the number of entries disables trap + * tracing for the calling virtual CPU. The buffer allocated must be + * sized for a power of two number of 64-byte trap trace entries plus + * an initial 64-byte control structure. + * + * This may be invoked any number of times so that a virtual CPU may + * relocate a trap trace buffer or create "snapshots" of information. + * + * If the real address is illegal or badly aligned, then trap tracing + * is disabled and an error is returned. + * + * Upon failure with EINVAL, this service call returns in RET1 the + * minimum number of buffer entries required. Upon other failures + * RET1 is undefined. + */ +#define HV_FAST_TTRACE_BUF_CONF 0x90 + +/* ttrace_buf_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TTRACE_BUF_INFO + * RET0: status + * RET1: real address + * RET2: size + * ERRORS: None defined. + * + * Returns the size and location of the previously declared trap-trace + * buffer. In the event that no buffer was previously defined, or the + * buffer is disabled, this call will return a size of zero bytes. + */ +#define HV_FAST_TTRACE_BUF_INFO 0x91 + +/* ttrace_enable() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TTRACE_ENABLE + * ARG0: enable + * RET0: status + * RET1: previous enable state + * ERRORS: EINVAL No trap trace buffer currently defined + * + * Enable or disable trap tracing, and return the previous enabled + * state in RET1. Future systems may define various flags for the + * enable argument (ARG0), for the moment a guest should pass + * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all + * tracing - which will ensure future compatability. + */ +#define HV_FAST_TTRACE_ENABLE 0x92 + +/* ttrace_freeze() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TTRACE_FREEZE + * ARG0: freeze + * RET0: status + * RET1: previous freeze state + * ERRORS: EINVAL No trap trace buffer currently defined + * + * Freeze or unfreeze trap tracing, returning the previous freeze + * state in RET1. A guest should pass a non-zero value to freeze and + * a zero value to unfreeze all tracing. The returned previous state + * is 0 for not frozen and 1 for frozen. + */ +#define HV_FAST_TTRACE_FREEZE 0x93 + +/* ttrace_addentry() + * TRAP: HV_TTRACE_ADDENTRY_TRAP + * ARG0: tag (16-bits) + * ARG1: data word 0 + * ARG2: data word 1 + * ARG3: data word 2 + * ARG4: data word 3 + * RET0: status + * ERRORS: EINVAL No trap trace buffer currently defined + * + * Add an entry to the trap trace buffer. Upon return only ARG0/RET0 + * is modified - none of the other registers holding arguments are + * volatile across this hypervisor service. + */ + +/* Core dump services. + * + * Since the hypervisor viraulizes and thus obscures a lot of the + * physical machine layout and state, traditional OS crash dumps can + * be difficult to diagnose especially when the problem is a + * configuration error of some sort. + * + * The dump services provide an opaque buffer into which the + * hypervisor can place it's internal state in order to assist in + * debugging such situations. The contents are opaque and extremely + * platform and hypervisor implementation specific. The guest, during + * a core dump, requests that the hypervisor update any information in + * the dump buffer in preparation to being dumped as part of the + * domain's memory image. + */ + +/* dump_buf_update() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_DUMP_BUF_UPDATE + * ARG0: real address + * ARG1: size + * RET0: status + * RET1: required size of dump buffer + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Real address is not aligned on a 64-byte + * boundary + * EINVAL Size is non-zero but less than minimum size + * required + * ENOTSUPPORTED Operation not supported on current logical + * domain + * + * Declare a domain dump buffer to the hypervisor. The real address + * provided for the domain dump buffer must be 64-byte aligned. The + * size specifies the size of the dump buffer and may be larger than + * the minimum size specified in the machine description. The + * hypervisor will fill the dump buffer with opaque data. + * + * Note: A guest may elect to include dump buffer contents as part of a crash + * dump to assist with debugging. This function may be called any number + * of times so that a guest may relocate a dump buffer, or create + * "snapshots" of any dump-buffer information. Each call to + * dump_buf_update() atomically declares the new dump buffer to the + * hypervisor. + * + * A specified size of 0 unconfigures the dump buffer. If the real + * address is illegal or badly aligned, then any currently active dump + * buffer is disabled and an error is returned. + * + * In the event that the call fails with EINVAL, RET1 contains the + * minimum size requires by the hypervisor for a valid dump buffer. + */ +#define HV_FAST_DUMP_BUF_UPDATE 0x94 + +/* dump_buf_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_DUMP_BUF_INFO + * RET0: status + * RET1: real address of current dump buffer + * RET2: size of current dump buffer + * ERRORS: No errors defined. + * + * Return the currently configures dump buffer description. A + * returned size of 0 bytes indicates an undefined dump buffer. In + * this case the return address in RET1 is undefined. + */ +#define HV_FAST_DUMP_BUF_INFO 0x95 + +/* Device interrupt services. + * + * Device interrupts are allocated to system bus bridges by the hypervisor, + * and described to OBP in the machine description. OBP then describes + * these interrupts to the OS via properties in the device tree. + * + * Terminology: + * + * cpuid Unique opaque value which represents a target cpu. + * + * devhandle Device handle. It uniquely identifies a device, and + * consistes of the lower 28-bits of the hi-cell of the + * first entry of the device's "reg" property in the + * OBP device tree. + * + * devino Device interrupt number. Specifies the relative + * interrupt number within the device. The unique + * combination of devhandle and devino are used to + * identify a specific device interrupt. + * + * Note: The devino value is the same as the values in the + * "interrupts" property or "interrupt-map" property + * in the OBP device tree for that device. + * + * sysino System interrupt number. A 64-bit unsigned interger + * representing a unique interrupt within a virtual + * machine. + * + * intr_state A flag representing the interrupt state for a given + * sysino. The state values are defined below. + * + * intr_enabled A flag representing the 'enabled' state for a given + * sysino. The enable values are defined below. + */ + +#define HV_INTR_STATE_IDLE 0 /* Nothing pending */ +#define HV_INTR_STATE_RECEIVED 1 /* Interrupt received by hardware */ +#define HV_INTR_STATE_DELIVERED 2 /* Interrupt delivered to queue */ + +#define HV_INTR_DISABLED 0 /* sysino not enabled */ +#define HV_INTR_ENABLED 1 /* sysino enabled */ + +/* intr_devino_to_sysino() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_DEVINO2SYSINO + * ARG0: devhandle + * ARG1: devino + * RET0: status + * RET1: sysino + * ERRORS: EINVAL Invalid devhandle/devino + * + * Converts a device specific interrupt number of the given + * devhandle/devino into a system specific ino (sysino). + */ +#define HV_FAST_INTR_DEVINO2SYSINO 0xa0 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_devino_to_sysino(unsigned long devhandle, + unsigned long devino); +#endif + +/* intr_getenabled() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_GETENABLED + * ARG0: sysino + * RET0: status + * RET1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) + * ERRORS: EINVAL Invalid sysino + * + * Returns interrupt enabled state in RET1 for the interrupt defined + * by the given sysino. + */ +#define HV_FAST_INTR_GETENABLED 0xa1 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_getenabled(unsigned long sysino); +#endif + +/* intr_setenabled() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_SETENABLED + * ARG0: sysino + * ARG1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) + * RET0: status + * ERRORS: EINVAL Invalid sysino or intr_enabled value + * + * Set the 'enabled' state of the interrupt sysino. + */ +#define HV_FAST_INTR_SETENABLED 0xa2 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_setenabled(unsigned long sysino, unsigned long intr_enabled); +#endif + +/* intr_getstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_GETSTATE + * ARG0: sysino + * RET0: status + * RET1: intr_state (HV_INTR_STATE_*) + * ERRORS: EINVAL Invalid sysino + * + * Returns current state of the interrupt defined by the given sysino. + */ +#define HV_FAST_INTR_GETSTATE 0xa3 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_getstate(unsigned long sysino); +#endif + +/* intr_setstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_SETSTATE + * ARG0: sysino + * ARG1: intr_state (HV_INTR_STATE_*) + * RET0: status + * ERRORS: EINVAL Invalid sysino or intr_state value + * + * Sets the current state of the interrupt described by the given sysino + * value. + * + * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending + * interrupt for sysino. + */ +#define HV_FAST_INTR_SETSTATE 0xa4 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_setstate(unsigned long sysino, unsigned long intr_state); +#endif + +/* intr_gettarget() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_GETTARGET + * ARG0: sysino + * RET0: status + * RET1: cpuid + * ERRORS: EINVAL Invalid sysino + * + * Returns CPU that is the current target of the interrupt defined by + * the given sysino. The CPU value returned is undefined if the target + * has not been set via intr_settarget(). + */ +#define HV_FAST_INTR_GETTARGET 0xa5 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_gettarget(unsigned long sysino); +#endif + +/* intr_settarget() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_SETTARGET + * ARG0: sysino + * ARG1: cpuid + * RET0: status + * ERRORS: EINVAL Invalid sysino + * ENOCPU Invalid cpuid + * + * Set the target CPU for the interrupt defined by the given sysino. + */ +#define HV_FAST_INTR_SETTARGET 0xa6 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid); +#endif + +/* vintr_get_cookie() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_GET_COOKIE + * ARG0: device handle + * ARG1: device ino + * RET0: status + * RET1: cookie + */ +#define HV_FAST_VINTR_GET_COOKIE 0xa7 + +/* vintr_set_cookie() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_SET_COOKIE + * ARG0: device handle + * ARG1: device ino + * ARG2: cookie + * RET0: status + */ +#define HV_FAST_VINTR_SET_COOKIE 0xa8 + +/* vintr_get_valid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_GET_VALID + * ARG0: device handle + * ARG1: device ino + * RET0: status + * RET1: valid state + */ +#define HV_FAST_VINTR_GET_VALID 0xa9 + +/* vintr_set_valid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_SET_VALID + * ARG0: device handle + * ARG1: device ino + * ARG2: valid state + * RET0: status + */ +#define HV_FAST_VINTR_SET_VALID 0xaa + +/* vintr_get_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_GET_STATE + * ARG0: device handle + * ARG1: device ino + * RET0: status + * RET1: state + */ +#define HV_FAST_VINTR_GET_STATE 0xab + +/* vintr_set_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_SET_STATE + * ARG0: device handle + * ARG1: device ino + * ARG2: state + * RET0: status + */ +#define HV_FAST_VINTR_SET_STATE 0xac + +/* vintr_get_target() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_GET_TARGET + * ARG0: device handle + * ARG1: device ino + * RET0: status + * RET1: cpuid + */ +#define HV_FAST_VINTR_GET_TARGET 0xad + +/* vintr_set_target() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_SET_TARGET + * ARG0: device handle + * ARG1: device ino + * ARG2: cpuid + * RET0: status + */ +#define HV_FAST_VINTR_SET_TARGET 0xae + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_vintr_get_cookie(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long *cookie); +extern unsigned long sun4v_vintr_set_cookie(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long cookie); +extern unsigned long sun4v_vintr_get_valid(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long *valid); +extern unsigned long sun4v_vintr_set_valid(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long valid); +extern unsigned long sun4v_vintr_get_state(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long *state); +extern unsigned long sun4v_vintr_set_state(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long state); +extern unsigned long sun4v_vintr_get_target(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long *cpuid); +extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long cpuid); +#endif + +/* PCI IO services. + * + * See the terminology descriptions in the device interrupt services + * section above as those apply here too. Here are terminology + * definitions specific to these PCI IO services: + * + * tsbnum TSB number. Indentifies which io-tsb is used. + * For this version of the specification, tsbnum + * must be zero. + * + * tsbindex TSB index. Identifies which entry in the TSB + * is used. The first entry is zero. + * + * tsbid A 64-bit aligned data structure which contains + * a tsbnum and a tsbindex. Bits 63:32 contain the + * tsbnum and bits 31:00 contain the tsbindex. + * + * Use the HV_PCI_TSBID() macro to construct such + * values. + * + * io_attributes IO attributes for IOMMU mappings. One of more + * of the attritbute bits are stores in a 64-bit + * value. The values are defined below. + * + * r_addr 64-bit real address + * + * pci_device PCI device address. A PCI device address identifies + * a specific device on a specific PCI bus segment. + * A PCI device address ia a 32-bit unsigned integer + * with the following format: + * + * 00000000.bbbbbbbb.dddddfff.00000000 + * + * Use the HV_PCI_DEVICE_BUILD() macro to construct + * such values. + * + * pci_config_offset + * PCI configureation space offset. For conventional + * PCI a value between 0 and 255. For extended + * configuration space, a value between 0 and 4095. + * + * Note: For PCI configuration space accesses, the offset + * must be aligned to the access size. + * + * error_flag A return value which specifies if the action succeeded + * or failed. 0 means no error, non-0 means some error + * occurred while performing the service. + * + * io_sync_direction + * Direction definition for pci_dma_sync(), defined + * below in HV_PCI_SYNC_*. + * + * io_page_list A list of io_page_addresses, an io_page_address is + * a real address. + * + * io_page_list_p A pointer to an io_page_list. + * + * "size based byte swap" - Some functions do size based byte swapping + * which allows sw to access pointers and + * counters in native form when the processor + * operates in a different endianness than the + * IO bus. Size-based byte swapping converts a + * multi-byte field between big-endian and + * little-endian format. + */ + +#define HV_PCI_MAP_ATTR_READ 0x01 +#define HV_PCI_MAP_ATTR_WRITE 0x02 + +#define HV_PCI_DEVICE_BUILD(b,d,f) \ + ((((b) & 0xff) << 16) | \ + (((d) & 0x1f) << 11) | \ + (((f) & 0x07) << 8)) + +#define HV_PCI_TSBID(__tsb_num, __tsb_index) \ + ((((u64)(__tsb_num)) << 32UL) | ((u64)(__tsb_index))) + +#define HV_PCI_SYNC_FOR_DEVICE 0x01 +#define HV_PCI_SYNC_FOR_CPU 0x02 + +/* pci_iommu_map() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOMMU_MAP + * ARG0: devhandle + * ARG1: tsbid + * ARG2: #ttes + * ARG3: io_attributes + * ARG4: io_page_list_p + * RET0: status + * RET1: #ttes mapped + * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex/io_attributes + * EBADALIGN Improperly aligned real address + * ENORADDR Invalid real address + * + * Create IOMMU mappings in the sun4v device defined by the given + * devhandle. The mappings are created in the TSB defined by the + * tsbnum component of the given tsbid. The first mapping is created + * in the TSB i ndex defined by the tsbindex component of the given tsbid. + * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex, + * the second at tsbnum, tsbindex + 1, etc. + * + * All mappings are created with the attributes defined by the io_attributes + * argument. The page mapping addresses are described in the io_page_list + * defined by the given io_page_list_p, which is a pointer to the io_page_list. + * The first entry in the io_page_list is the address for the first iotte, the + * 2nd for the 2nd iotte, and so on. + * + * Each io_page_address in the io_page_list must be appropriately aligned. + * #ttes must be greater than zero. For this version of the spec, the tsbnum + * component of the given tsbid must be zero. + * + * Returns the actual number of mappings creates, which may be less than + * or equal to the argument #ttes. If the function returns a value which + * is less than the #ttes, the caller may continus to call the function with + * an updated tsbid, #ttes, io_page_list_p arguments until all pages are + * mapped. + * + * Note: This function does not imply an iotte cache flush. The guest must + * demap an entry before re-mapping it. + */ +#define HV_FAST_PCI_IOMMU_MAP 0xb0 + +/* pci_iommu_demap() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOMMU_DEMAP + * ARG0: devhandle + * ARG1: tsbid + * ARG2: #ttes + * RET0: status + * RET1: #ttes demapped + * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex + * + * Demap and flush IOMMU mappings in the device defined by the given + * devhandle. Demaps up to #ttes entries in the TSB defined by the tsbnum + * component of the given tsbid, starting at the TSB index defined by the + * tsbindex component of the given tsbid. + * + * For this version of the spec, the tsbnum of the given tsbid must be zero. + * #ttes must be greater than zero. + * + * Returns the actual number of ttes demapped, which may be less than or equal + * to the argument #ttes. If #ttes demapped is less than #ttes, the caller + * may continue to call this function with updated tsbid and #ttes arguments + * until all pages are demapped. + * + * Note: Entries do not have to be mapped to be demapped. A demap of an + * unmapped page will flush the entry from the tte cache. + */ +#define HV_FAST_PCI_IOMMU_DEMAP 0xb1 + +/* pci_iommu_getmap() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOMMU_GETMAP + * ARG0: devhandle + * ARG1: tsbid + * RET0: status + * RET1: io_attributes + * RET2: real address + * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex + * ENOMAP Mapping is not valid, no translation exists + * + * Read and return the mapping in the device described by the given devhandle + * and tsbid. If successful, the io_attributes shall be returned in RET1 + * and the page address of the mapping shall be returned in RET2. + * + * For this version of the spec, the tsbnum component of the given tsbid + * must be zero. + */ +#define HV_FAST_PCI_IOMMU_GETMAP 0xb2 + +/* pci_iommu_getbypass() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOMMU_GETBYPASS + * ARG0: devhandle + * ARG1: real address + * ARG2: io_attributes + * RET0: status + * RET1: io_addr + * ERRORS: EINVAL Invalid devhandle/io_attributes + * ENORADDR Invalid real address + * ENOTSUPPORTED Function not supported in this implementation. + * + * Create a "special" mapping in the device described by the given devhandle, + * for the given real address and attributes. Return the IO address in RET1 + * if successful. + */ +#define HV_FAST_PCI_IOMMU_GETBYPASS 0xb3 + +/* pci_config_get() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_CONFIG_GET + * ARG0: devhandle + * ARG1: pci_device + * ARG2: pci_config_offset + * ARG3: size + * RET0: status + * RET1: error_flag + * RET2: data + * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size + * EBADALIGN pci_config_offset not size aligned + * ENOACCESS Access to this offset is not permitted + * + * Read PCI configuration space for the adapter described by the given + * devhandle. Read size (1, 2, or 4) bytes of data from the given + * pci_device, at pci_config_offset from the beginning of the device's + * configuration space. If there was no error, RET1 is set to zero and + * RET2 is set to the data read. Insignificant bits in RET2 are not + * guarenteed to have any specific value and therefore must be ignored. + * + * The data returned in RET2 is size based byte swapped. + * + * If an error occurs during the read, set RET1 to a non-zero value. The + * given pci_config_offset must be 'size' aligned. + */ +#define HV_FAST_PCI_CONFIG_GET 0xb4 + +/* pci_config_put() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_CONFIG_PUT + * ARG0: devhandle + * ARG1: pci_device + * ARG2: pci_config_offset + * ARG3: size + * ARG4: data + * RET0: status + * RET1: error_flag + * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size + * EBADALIGN pci_config_offset not size aligned + * ENOACCESS Access to this offset is not permitted + * + * Write PCI configuration space for the adapter described by the given + * devhandle. Write size (1, 2, or 4) bytes of data in a single operation, + * at pci_config_offset from the beginning of the device's configuration + * space. The data argument contains the data to be written to configuration + * space. Prior to writing, the data is size based byte swapped. + * + * If an error occurs during the write access, do not generate an error + * report, do set RET1 to a non-zero value. Otherwise RET1 is zero. + * The given pci_config_offset must be 'size' aligned. + * + * This function is permitted to read from offset zero in the configuration + * space described by the given pci_device if necessary to ensure that the + * write access to config space completes. + */ +#define HV_FAST_PCI_CONFIG_PUT 0xb5 + +/* pci_peek() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_PEEK + * ARG0: devhandle + * ARG1: real address + * ARG2: size + * RET0: status + * RET1: error_flag + * RET2: data + * ERRORS: EINVAL Invalid devhandle or size + * EBADALIGN Improperly aligned real address + * ENORADDR Bad real address + * ENOACCESS Guest access prohibited + * + * Attempt to read the IO address given by the given devhandle, real address, + * and size. Size must be 1, 2, 4, or 8. The read is performed as a single + * access operation using the given size. If an error occurs when reading + * from the given location, do not generate an error report, but return a + * non-zero value in RET1. If the read was successful, return zero in RET1 + * and return the actual data read in RET2. The data returned is size based + * byte swapped. + * + * Non-significant bits in RET2 are not guarenteed to have any specific value + * and therefore must be ignored. If RET1 is returned as non-zero, the data + * value is not guarenteed to have any specific value and should be ignored. + * + * The caller must have permission to read from the given devhandle, real + * address, which must be an IO address. The argument real address must be a + * size aligned address. + * + * The hypervisor implementation of this function must block access to any + * IO address that the guest does not have explicit permission to access. + */ +#define HV_FAST_PCI_PEEK 0xb6 + +/* pci_poke() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_POKE + * ARG0: devhandle + * ARG1: real address + * ARG2: size + * ARG3: data + * ARG4: pci_device + * RET0: status + * RET1: error_flag + * ERRORS: EINVAL Invalid devhandle, size, or pci_device + * EBADALIGN Improperly aligned real address + * ENORADDR Bad real address + * ENOACCESS Guest access prohibited + * ENOTSUPPORTED Function is not supported by implementation + * + * Attempt to write data to the IO address given by the given devhandle, + * real address, and size. Size must be 1, 2, 4, or 8. The write is + * performed as a single access operation using the given size. Prior to + * writing the data is size based swapped. + * + * If an error occurs when writing to the given location, do not generate an + * error report, but return a non-zero value in RET1. If the write was + * successful, return zero in RET1. + * + * pci_device describes the configuration address of the device being + * written to. The implementation may safely read from offset 0 with + * the configuration space of the device described by devhandle and + * pci_device in order to guarantee that the write portion of the operation + * completes + * + * Any error that occurs due to the read shall be reported using the normal + * error reporting mechanisms .. the read error is not suppressed. + * + * The caller must have permission to write to the given devhandle, real + * address, which must be an IO address. The argument real address must be a + * size aligned address. The caller must have permission to read from + * the given devhandle, pci_device cofiguration space offset 0. + * + * The hypervisor implementation of this function must block access to any + * IO address that the guest does not have explicit permission to access. + */ +#define HV_FAST_PCI_POKE 0xb7 + +/* pci_dma_sync() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_DMA_SYNC + * ARG0: devhandle + * ARG1: real address + * ARG2: size + * ARG3: io_sync_direction + * RET0: status + * RET1: #synced + * ERRORS: EINVAL Invalid devhandle or io_sync_direction + * ENORADDR Bad real address + * + * Synchronize a memory region described by the given real address and size, + * for the device defined by the given devhandle using the direction(s) + * defined by the given io_sync_direction. The argument size is the size of + * the memory region in bytes. + * + * Return the actual number of bytes synchronized in the return value #synced, + * which may be less than or equal to the argument size. If the return + * value #synced is less than size, the caller must continue to call this + * function with updated real address and size arguments until the entire + * memory region is synchronized. + */ +#define HV_FAST_PCI_DMA_SYNC 0xb8 + +/* PCI MSI services. */ + +#define HV_MSITYPE_MSI32 0x00 +#define HV_MSITYPE_MSI64 0x01 + +#define HV_MSIQSTATE_IDLE 0x00 +#define HV_MSIQSTATE_ERROR 0x01 + +#define HV_MSIQ_INVALID 0x00 +#define HV_MSIQ_VALID 0x01 + +#define HV_MSISTATE_IDLE 0x00 +#define HV_MSISTATE_DELIVERED 0x01 + +#define HV_MSIVALID_INVALID 0x00 +#define HV_MSIVALID_VALID 0x01 + +#define HV_PCIE_MSGTYPE_PME_MSG 0x18 +#define HV_PCIE_MSGTYPE_PME_ACK_MSG 0x1b +#define HV_PCIE_MSGTYPE_CORR_MSG 0x30 +#define HV_PCIE_MSGTYPE_NONFATAL_MSG 0x31 +#define HV_PCIE_MSGTYPE_FATAL_MSG 0x33 + +#define HV_MSG_INVALID 0x00 +#define HV_MSG_VALID 0x01 + +/* pci_msiq_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_CONF + * ARG0: devhandle + * ARG1: msiqid + * ARG2: real address + * ARG3: number of entries + * RET0: status + * ERRORS: EINVAL Invalid devhandle, msiqid or nentries + * EBADALIGN Improperly aligned real address + * ENORADDR Bad real address + * + * Configure the MSI queue given by the devhandle and msiqid arguments, + * and to be placed at the given real address and be of the given + * number of entries. The real address must be aligned exactly to match + * the queue size. Each queue entry is 64-bytes long, so f.e. a 32 entry + * queue must be aligned on a 2048 byte real address boundary. The MSI-EQ + * Head and Tail are initialized so that the MSI-EQ is 'empty'. + * + * Implementation Note: Certain implementations have fixed sized queues. In + * that case, number of entries must contain the correct + * value. + */ +#define HV_FAST_PCI_MSIQ_CONF 0xc0 + +/* pci_msiq_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_INFO + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: real address + * RET2: number of entries + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Return the configuration information for the MSI queue described + * by the given devhandle and msiqid. The base address of the queue + * is returned in ARG1 and the number of entries is returned in ARG2. + * If the queue is unconfigured, the real address is undefined and the + * number of entries will be returned as zero. + */ +#define HV_FAST_PCI_MSIQ_INFO 0xc1 + +/* pci_msiq_getvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID) + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Get the valid state of the MSI-EQ described by the given devhandle and + * msiqid. + */ +#define HV_FAST_PCI_MSIQ_GETVALID 0xc2 + +/* pci_msiq_setvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_SETVALID + * ARG0: devhandle + * ARG1: msiqid + * ARG2: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID) + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msiqid or msiqvalid + * value or MSI EQ is uninitialized + * + * Set the valid state of the MSI-EQ described by the given devhandle and + * msiqid to the given msiqvalid. + */ +#define HV_FAST_PCI_MSIQ_SETVALID 0xc3 + +/* pci_msiq_getstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETSTATE + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR) + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Get the state of the MSI-EQ described by the given devhandle and + * msiqid. + */ +#define HV_FAST_PCI_MSIQ_GETSTATE 0xc4 + +/* pci_msiq_getvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID + * ARG0: devhandle + * ARG1: msiqid + * ARG2: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR) + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msiqid or msiqstate + * value or MSI EQ is uninitialized + * + * Set the state of the MSI-EQ described by the given devhandle and + * msiqid to the given msiqvalid. + */ +#define HV_FAST_PCI_MSIQ_SETSTATE 0xc5 + +/* pci_msiq_gethead() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETHEAD + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: msiqhead + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Get the current MSI EQ queue head for the MSI-EQ described by the + * given devhandle and msiqid. + */ +#define HV_FAST_PCI_MSIQ_GETHEAD 0xc6 + +/* pci_msiq_sethead() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_SETHEAD + * ARG0: devhandle + * ARG1: msiqid + * ARG2: msiqhead + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msiqid or msiqhead, + * or MSI EQ is uninitialized + * + * Set the current MSI EQ queue head for the MSI-EQ described by the + * given devhandle and msiqid. + */ +#define HV_FAST_PCI_MSIQ_SETHEAD 0xc7 + +/* pci_msiq_gettail() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETTAIL + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: msiqtail + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Get the current MSI EQ queue tail for the MSI-EQ described by the + * given devhandle and msiqid. + */ +#define HV_FAST_PCI_MSIQ_GETTAIL 0xc8 + +/* pci_msi_getvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_GETVALID + * ARG0: devhandle + * ARG1: msinum + * RET0: status + * RET1: msivalidstate + * ERRORS: EINVAL Invalid devhandle or msinum + * + * Get the current valid/enabled state for the MSI defined by the + * given devhandle and msinum. + */ +#define HV_FAST_PCI_MSI_GETVALID 0xc9 + +/* pci_msi_setvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_SETVALID + * ARG0: devhandle + * ARG1: msinum + * ARG2: msivalidstate + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msinum or msivalidstate + * + * Set the current valid/enabled state for the MSI defined by the + * given devhandle and msinum. + */ +#define HV_FAST_PCI_MSI_SETVALID 0xca + +/* pci_msi_getmsiq() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_GETMSIQ + * ARG0: devhandle + * ARG1: msinum + * RET0: status + * RET1: msiqid + * ERRORS: EINVAL Invalid devhandle or msinum or MSI is unbound + * + * Get the MSI EQ that the MSI defined by the given devhandle and + * msinum is bound to. + */ +#define HV_FAST_PCI_MSI_GETMSIQ 0xcb + +/* pci_msi_setmsiq() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_SETMSIQ + * ARG0: devhandle + * ARG1: msinum + * ARG2: msitype + * ARG3: msiqid + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msinum or msiqid + * + * Set the MSI EQ that the MSI defined by the given devhandle and + * msinum is bound to. + */ +#define HV_FAST_PCI_MSI_SETMSIQ 0xcc + +/* pci_msi_getstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_GETSTATE + * ARG0: devhandle + * ARG1: msinum + * RET0: status + * RET1: msistate + * ERRORS: EINVAL Invalid devhandle or msinum + * + * Get the state of the MSI defined by the given devhandle and msinum. + * If not initialized, return HV_MSISTATE_IDLE. + */ +#define HV_FAST_PCI_MSI_GETSTATE 0xcd + +/* pci_msi_setstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_SETSTATE + * ARG0: devhandle + * ARG1: msinum + * ARG2: msistate + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msinum or msistate + * + * Set the state of the MSI defined by the given devhandle and msinum. + */ +#define HV_FAST_PCI_MSI_SETSTATE 0xce + +/* pci_msg_getmsiq() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSG_GETMSIQ + * ARG0: devhandle + * ARG1: msgtype + * RET0: status + * RET1: msiqid + * ERRORS: EINVAL Invalid devhandle or msgtype + * + * Get the MSI EQ of the MSG defined by the given devhandle and msgtype. + */ +#define HV_FAST_PCI_MSG_GETMSIQ 0xd0 + +/* pci_msg_setmsiq() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSG_SETMSIQ + * ARG0: devhandle + * ARG1: msgtype + * ARG2: msiqid + * RET0: status + * ERRORS: EINVAL Invalid devhandle, msgtype, or msiqid + * + * Set the MSI EQ of the MSG defined by the given devhandle and msgtype. + */ +#define HV_FAST_PCI_MSG_SETMSIQ 0xd1 + +/* pci_msg_getvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSG_GETVALID + * ARG0: devhandle + * ARG1: msgtype + * RET0: status + * RET1: msgvalidstate + * ERRORS: EINVAL Invalid devhandle or msgtype + * + * Get the valid/enabled state of the MSG defined by the given + * devhandle and msgtype. + */ +#define HV_FAST_PCI_MSG_GETVALID 0xd2 + +/* pci_msg_setvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSG_SETVALID + * ARG0: devhandle + * ARG1: msgtype + * ARG2: msgvalidstate + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msgtype or msgvalidstate + * + * Set the valid/enabled state of the MSG defined by the given + * devhandle and msgtype. + */ +#define HV_FAST_PCI_MSG_SETVALID 0xd3 + +/* Logical Domain Channel services. */ + +#define LDC_CHANNEL_DOWN 0 +#define LDC_CHANNEL_UP 1 +#define LDC_CHANNEL_RESETTING 2 + +/* ldc_tx_qconf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_TX_QCONF + * ARG0: channel ID + * ARG1: real address base of queue + * ARG2: num entries in queue + * RET0: status + * + * Configure transmit queue for the LDC endpoint specified by the + * given channel ID, to be placed at the given real address, and + * be of the given num entries. Num entries must be a power of two. + * The real address base of the queue must be aligned on the queue + * size. Each queue entry is 64-bytes, so for example, a 32 entry + * queue must be aligned on a 2048 byte real address boundary. + * + * Upon configuration of a valid transmit queue the head and tail + * pointers are set to a hypervisor specific identical value indicating + * that the queue initially is empty. + * + * The endpoint's transmit queue is un-configured if num entries is zero. + * + * The maximum number of entries for each queue for a specific cpu may be + * determined from the machine description. A transmit queue may be + * specified even in the event that the LDC is down (peer endpoint has no + * receive queue specified). Transmission will begin as soon as the peer + * endpoint defines a receive queue. + * + * It is recommended that a guest wait for a transmit queue to empty prior + * to reconfiguring it, or un-configuring it. Re or un-configuring of a + * non-empty transmit queue behaves exactly as defined above, however it + * is undefined as to how many of the pending entries in the original queue + * will be delivered prior to the re-configuration taking effect. + * Furthermore, as the queue configuration causes a reset of the head and + * tail pointers there is no way for a guest to determine how many entries + * have been sent after the configuration operation. + */ +#define HV_FAST_LDC_TX_QCONF 0xe0 + +/* ldc_tx_qinfo() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_TX_QINFO + * ARG0: channel ID + * RET0: status + * RET1: real address base of queue + * RET2: num entries in queue + * + * Return the configuration info for the transmit queue of LDC endpoint + * defined by the given channel ID. The real address is the currently + * defined real address base of the defined queue, and num entries is the + * size of the queue in terms of number of entries. + * + * If the specified channel ID is a valid endpoint number, but no transmit + * queue has been defined this service will return success, but with num + * entries set to zero and the real address will have an undefined value. + */ +#define HV_FAST_LDC_TX_QINFO 0xe1 + +/* ldc_tx_get_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_TX_GET_STATE + * ARG0: channel ID + * RET0: status + * RET1: head offset + * RET2: tail offset + * RET3: channel state + * + * Return the transmit state, and the head and tail queue pointers, for + * the transmit queue of the LDC endpoint defined by the given channel ID. + * The head and tail values are the byte offset of the head and tail + * positions of the transmit queue for the specified endpoint. + */ +#define HV_FAST_LDC_TX_GET_STATE 0xe2 + +/* ldc_tx_set_qtail() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_TX_SET_QTAIL + * ARG0: channel ID + * ARG1: tail offset + * RET0: status + * + * Update the tail pointer for the transmit queue associated with the LDC + * endpoint defined by the given channel ID. The tail offset specified + * must be aligned on a 64 byte boundary, and calculated so as to increase + * the number of pending entries on the transmit queue. Any attempt to + * decrease the number of pending transmit queue entires is considered + * an invalid tail offset and will result in an EINVAL error. + * + * Since the tail of the transmit queue may not be moved backwards, the + * transmit queue may be flushed by configuring a new transmit queue, + * whereupon the hypervisor will configure the initial transmit head and + * tail pointers to be equal. + */ +#define HV_FAST_LDC_TX_SET_QTAIL 0xe3 + +/* ldc_rx_qconf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_RX_QCONF + * ARG0: channel ID + * ARG1: real address base of queue + * ARG2: num entries in queue + * RET0: status + * + * Configure receive queue for the LDC endpoint specified by the + * given channel ID, to be placed at the given real address, and + * be of the given num entries. Num entries must be a power of two. + * The real address base of the queue must be aligned on the queue + * size. Each queue entry is 64-bytes, so for example, a 32 entry + * queue must be aligned on a 2048 byte real address boundary. + * + * The endpoint's transmit queue is un-configured if num entries is zero. + * + * If a valid receive queue is specified for a local endpoint the LDC is + * in the up state for the purpose of transmission to this endpoint. + * + * The maximum number of entries for each queue for a specific cpu may be + * determined from the machine description. + * + * As receive queue configuration causes a reset of the queue's head and + * tail pointers there is no way for a gues to determine how many entries + * have been received between a preceeding ldc_get_rx_state() API call + * and the completion of the configuration operation. It should be noted + * that datagram delivery is not guarenteed via domain channels anyway, + * and therefore any higher protocol should be resilient to datagram + * loss if necessary. However, to overcome this specific race potential + * it is recommended, for example, that a higher level protocol be employed + * to ensure either retransmission, or ensure that no datagrams are pending + * on the peer endpoint's transmit queue prior to the configuration process. + */ +#define HV_FAST_LDC_RX_QCONF 0xe4 + +/* ldc_rx_qinfo() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_RX_QINFO + * ARG0: channel ID + * RET0: status + * RET1: real address base of queue + * RET2: num entries in queue + * + * Return the configuration info for the receive queue of LDC endpoint + * defined by the given channel ID. The real address is the currently + * defined real address base of the defined queue, and num entries is the + * size of the queue in terms of number of entries. + * + * If the specified channel ID is a valid endpoint number, but no receive + * queue has been defined this service will return success, but with num + * entries set to zero and the real address will have an undefined value. + */ +#define HV_FAST_LDC_RX_QINFO 0xe5 + +/* ldc_rx_get_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_RX_GET_STATE + * ARG0: channel ID + * RET0: status + * RET1: head offset + * RET2: tail offset + * RET3: channel state + * + * Return the receive state, and the head and tail queue pointers, for + * the receive queue of the LDC endpoint defined by the given channel ID. + * The head and tail values are the byte offset of the head and tail + * positions of the receive queue for the specified endpoint. + */ +#define HV_FAST_LDC_RX_GET_STATE 0xe6 + +/* ldc_rx_set_qhead() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_RX_SET_QHEAD + * ARG0: channel ID + * ARG1: head offset + * RET0: status + * + * Update the head pointer for the receive queue associated with the LDC + * endpoint defined by the given channel ID. The head offset specified + * must be aligned on a 64 byte boundary, and calculated so as to decrease + * the number of pending entries on the receive queue. Any attempt to + * increase the number of pending receive queue entires is considered + * an invalid head offset and will result in an EINVAL error. + * + * The receive queue may be flushed by setting the head offset equal + * to the current tail offset. + */ +#define HV_FAST_LDC_RX_SET_QHEAD 0xe7 + +/* LDC Map Table Entry. Each slot is defined by a translation table + * entry, as specified by the LDC_MTE_* bits below, and a 64-bit + * hypervisor invalidation cookie. + */ +#define LDC_MTE_PADDR 0x0fffffffffffe000 /* pa[55:13] */ +#define LDC_MTE_COPY_W 0x0000000000000400 /* copy write access */ +#define LDC_MTE_COPY_R 0x0000000000000200 /* copy read access */ +#define LDC_MTE_IOMMU_W 0x0000000000000100 /* IOMMU write access */ +#define LDC_MTE_IOMMU_R 0x0000000000000080 /* IOMMU read access */ +#define LDC_MTE_EXEC 0x0000000000000040 /* execute */ +#define LDC_MTE_WRITE 0x0000000000000020 /* read */ +#define LDC_MTE_READ 0x0000000000000010 /* write */ +#define LDC_MTE_SZALL 0x000000000000000f /* page size bits */ +#define LDC_MTE_SZ16GB 0x0000000000000007 /* 16GB page */ +#define LDC_MTE_SZ2GB 0x0000000000000006 /* 2GB page */ +#define LDC_MTE_SZ256MB 0x0000000000000005 /* 256MB page */ +#define LDC_MTE_SZ32MB 0x0000000000000004 /* 32MB page */ +#define LDC_MTE_SZ4MB 0x0000000000000003 /* 4MB page */ +#define LDC_MTE_SZ512K 0x0000000000000002 /* 512K page */ +#define LDC_MTE_SZ64K 0x0000000000000001 /* 64K page */ +#define LDC_MTE_SZ8K 0x0000000000000000 /* 8K page */ + +#ifndef __ASSEMBLY__ +struct ldc_mtable_entry { + unsigned long mte; + unsigned long cookie; +}; +#endif + +/* ldc_set_map_table() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_SET_MAP_TABLE + * ARG0: channel ID + * ARG1: table real address + * ARG2: num entries + * RET0: status + * + * Register the MTE table at the given table real address, with the + * specified num entries, for the LDC indicated by the given channel + * ID. + */ +#define HV_FAST_LDC_SET_MAP_TABLE 0xea + +/* ldc_get_map_table() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_GET_MAP_TABLE + * ARG0: channel ID + * RET0: status + * RET1: table real address + * RET2: num entries + * + * Return the configuration of the current mapping table registered + * for the given channel ID. + */ +#define HV_FAST_LDC_GET_MAP_TABLE 0xeb + +#define LDC_COPY_IN 0 +#define LDC_COPY_OUT 1 + +/* ldc_copy() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_COPY + * ARG0: channel ID + * ARG1: LDC_COPY_* direction code + * ARG2: target real address + * ARG3: local real address + * ARG4: length in bytes + * RET0: status + * RET1: actual length in bytes + */ +#define HV_FAST_LDC_COPY 0xec + +#define LDC_MEM_READ 1 +#define LDC_MEM_WRITE 2 +#define LDC_MEM_EXEC 4 + +/* ldc_mapin() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_MAPIN + * ARG0: channel ID + * ARG1: cookie + * RET0: status + * RET1: real address + * RET2: LDC_MEM_* permissions + */ +#define HV_FAST_LDC_MAPIN 0xed + +/* ldc_unmap() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_UNMAP + * ARG0: real address + * RET0: status + */ +#define HV_FAST_LDC_UNMAP 0xee + +/* ldc_revoke() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_REVOKE + * ARG0: channel ID + * ARG1: cookie + * ARG2: ldc_mtable_entry cookie + * RET0: status + */ +#define HV_FAST_LDC_REVOKE 0xef + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_ldc_tx_qconf(unsigned long channel, + unsigned long ra, + unsigned long num_entries); +extern unsigned long sun4v_ldc_tx_qinfo(unsigned long channel, + unsigned long *ra, + unsigned long *num_entries); +extern unsigned long sun4v_ldc_tx_get_state(unsigned long channel, + unsigned long *head_off, + unsigned long *tail_off, + unsigned long *chan_state); +extern unsigned long sun4v_ldc_tx_set_qtail(unsigned long channel, + unsigned long tail_off); +extern unsigned long sun4v_ldc_rx_qconf(unsigned long channel, + unsigned long ra, + unsigned long num_entries); +extern unsigned long sun4v_ldc_rx_qinfo(unsigned long channel, + unsigned long *ra, + unsigned long *num_entries); +extern unsigned long sun4v_ldc_rx_get_state(unsigned long channel, + unsigned long *head_off, + unsigned long *tail_off, + unsigned long *chan_state); +extern unsigned long sun4v_ldc_rx_set_qhead(unsigned long channel, + unsigned long head_off); +extern unsigned long sun4v_ldc_set_map_table(unsigned long channel, + unsigned long ra, + unsigned long num_entries); +extern unsigned long sun4v_ldc_get_map_table(unsigned long channel, + unsigned long *ra, + unsigned long *num_entries); +extern unsigned long sun4v_ldc_copy(unsigned long channel, + unsigned long dir_code, + unsigned long tgt_raddr, + unsigned long lcl_raddr, + unsigned long len, + unsigned long *actual_len); +extern unsigned long sun4v_ldc_mapin(unsigned long channel, + unsigned long cookie, + unsigned long *ra, + unsigned long *perm); +extern unsigned long sun4v_ldc_unmap(unsigned long ra); +extern unsigned long sun4v_ldc_revoke(unsigned long channel, + unsigned long cookie, + unsigned long mte_cookie); +#endif + +/* Performance counter services. */ + +#define HV_PERF_JBUS_PERF_CTRL_REG 0x00 +#define HV_PERF_JBUS_PERF_CNT_REG 0x01 +#define HV_PERF_DRAM_PERF_CTRL_REG_0 0x02 +#define HV_PERF_DRAM_PERF_CNT_REG_0 0x03 +#define HV_PERF_DRAM_PERF_CTRL_REG_1 0x04 +#define HV_PERF_DRAM_PERF_CNT_REG_1 0x05 +#define HV_PERF_DRAM_PERF_CTRL_REG_2 0x06 +#define HV_PERF_DRAM_PERF_CNT_REG_2 0x07 +#define HV_PERF_DRAM_PERF_CTRL_REG_3 0x08 +#define HV_PERF_DRAM_PERF_CNT_REG_3 0x09 + +/* get_perfreg() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_GET_PERFREG + * ARG0: performance reg number + * RET0: status + * RET1: performance reg value + * ERRORS: EINVAL Invalid performance register number + * ENOACCESS No access allowed to performance counters + * + * Read the value of the given DRAM/JBUS performance counter/control register. + */ +#define HV_FAST_GET_PERFREG 0x100 + +/* set_perfreg() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SET_PERFREG + * ARG0: performance reg number + * ARG1: performance reg value + * RET0: status + * ERRORS: EINVAL Invalid performance register number + * ENOACCESS No access allowed to performance counters + * + * Write the given performance reg value to the given DRAM/JBUS + * performance counter/control register. + */ +#define HV_FAST_SET_PERFREG 0x101 + +/* MMU statistics services. + * + * The hypervisor maintains MMU statistics and privileged code provides + * a buffer where these statistics can be collected. It is continually + * updated once configured. The layout is as follows: + */ +#ifndef __ASSEMBLY__ +struct hv_mmu_statistics { + unsigned long immu_tsb_hits_ctx0_8k_tte; + unsigned long immu_tsb_ticks_ctx0_8k_tte; + unsigned long immu_tsb_hits_ctx0_64k_tte; + unsigned long immu_tsb_ticks_ctx0_64k_tte; + unsigned long __reserved1[2]; + unsigned long immu_tsb_hits_ctx0_4mb_tte; + unsigned long immu_tsb_ticks_ctx0_4mb_tte; + unsigned long __reserved2[2]; + unsigned long immu_tsb_hits_ctx0_256mb_tte; + unsigned long immu_tsb_ticks_ctx0_256mb_tte; + unsigned long __reserved3[4]; + unsigned long immu_tsb_hits_ctxnon0_8k_tte; + unsigned long immu_tsb_ticks_ctxnon0_8k_tte; + unsigned long immu_tsb_hits_ctxnon0_64k_tte; + unsigned long immu_tsb_ticks_ctxnon0_64k_tte; + unsigned long __reserved4[2]; + unsigned long immu_tsb_hits_ctxnon0_4mb_tte; + unsigned long immu_tsb_ticks_ctxnon0_4mb_tte; + unsigned long __reserved5[2]; + unsigned long immu_tsb_hits_ctxnon0_256mb_tte; + unsigned long immu_tsb_ticks_ctxnon0_256mb_tte; + unsigned long __reserved6[4]; + unsigned long dmmu_tsb_hits_ctx0_8k_tte; + unsigned long dmmu_tsb_ticks_ctx0_8k_tte; + unsigned long dmmu_tsb_hits_ctx0_64k_tte; + unsigned long dmmu_tsb_ticks_ctx0_64k_tte; + unsigned long __reserved7[2]; + unsigned long dmmu_tsb_hits_ctx0_4mb_tte; + unsigned long dmmu_tsb_ticks_ctx0_4mb_tte; + unsigned long __reserved8[2]; + unsigned long dmmu_tsb_hits_ctx0_256mb_tte; + unsigned long dmmu_tsb_ticks_ctx0_256mb_tte; + unsigned long __reserved9[4]; + unsigned long dmmu_tsb_hits_ctxnon0_8k_tte; + unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte; + unsigned long dmmu_tsb_hits_ctxnon0_64k_tte; + unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte; + unsigned long __reserved10[2]; + unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte; + unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte; + unsigned long __reserved11[2]; + unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte; + unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte; + unsigned long __reserved12[4]; +}; +#endif + +/* mmustat_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMUSTAT_CONF + * ARG0: real address + * RET0: status + * RET1: real address + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Real address not aligned on 64-byte boundary + * EBADTRAP API not supported on this processor + * + * Enable MMU statistic gathering using the buffer at the given real + * address on the current virtual CPU. The new buffer real address + * is given in ARG1, and the previously specified buffer real address + * is returned in RET1, or is returned as zero for the first invocation. + * + * If the passed in real address argument is zero, this will disable + * MMU statistic collection on the current virtual CPU. If an error is + * returned then no statistics are collected. + * + * The buffer contents should be initialized to all zeros before being + * given to the hypervisor or else the statistics will be meaningless. + */ +#define HV_FAST_MMUSTAT_CONF 0x102 + +/* mmustat_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMUSTAT_INFO + * RET0: status + * RET1: real address + * ERRORS: EBADTRAP API not supported on this processor + * + * Return the current state and real address of the currently configured + * MMU statistics buffer on the current virtual CPU. + */ +#define HV_FAST_MMUSTAT_INFO 0x103 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mmustat_conf(unsigned long ra, unsigned long *orig_ra); +extern unsigned long sun4v_mmustat_info(unsigned long *ra); +#endif + +/* NCS crypto services */ + +/* ncs_request() sub-function numbers */ +#define HV_NCS_QCONF 0x01 +#define HV_NCS_QTAIL_UPDATE 0x02 + +#ifndef __ASSEMBLY__ +struct hv_ncs_queue_entry { + /* MAU Control Register */ + unsigned long mau_control; +#define MAU_CONTROL_INV_PARITY 0x0000000000002000 +#define MAU_CONTROL_STRAND 0x0000000000001800 +#define MAU_CONTROL_BUSY 0x0000000000000400 +#define MAU_CONTROL_INT 0x0000000000000200 +#define MAU_CONTROL_OP 0x00000000000001c0 +#define MAU_CONTROL_OP_SHIFT 6 +#define MAU_OP_LOAD_MA_MEMORY 0x0 +#define MAU_OP_STORE_MA_MEMORY 0x1 +#define MAU_OP_MODULAR_MULT 0x2 +#define MAU_OP_MODULAR_REDUCE 0x3 +#define MAU_OP_MODULAR_EXP_LOOP 0x4 +#define MAU_CONTROL_LEN 0x000000000000003f +#define MAU_CONTROL_LEN_SHIFT 0 + + /* Real address of bytes to load or store bytes + * into/out-of the MAU. + */ + unsigned long mau_mpa; + + /* Modular Arithmetic MA Offset Register. */ + unsigned long mau_ma; + + /* Modular Arithmetic N Prime Register. */ + unsigned long mau_np; +}; + +struct hv_ncs_qconf_arg { + unsigned long mid; /* MAU ID, 1 per core on Niagara */ + unsigned long base; /* Real address base of queue */ + unsigned long end; /* Real address end of queue */ + unsigned long num_ents; /* Number of entries in queue */ +}; + +struct hv_ncs_qtail_update_arg { + unsigned long mid; /* MAU ID, 1 per core on Niagara */ + unsigned long tail; /* New tail index to use */ + unsigned long syncflag; /* only SYNCFLAG_SYNC is implemented */ +#define HV_NCS_SYNCFLAG_SYNC 0x00 +#define HV_NCS_SYNCFLAG_ASYNC 0x01 +}; +#endif + +/* ncs_request() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_NCS_REQUEST + * ARG0: NCS sub-function + * ARG1: sub-function argument real address + * ARG2: size in bytes of sub-function argument + * RET0: status + * + * The MAU chip of the Niagara processor is not directly accessible + * to privileged code, instead it is programmed indirectly via this + * hypervisor API. + * + * The interfaces defines a queue of MAU operations to perform. + * Privileged code registers a queue with the hypervisor by invoking + * this HVAPI with the HV_NCS_QCONF sub-function, which defines the + * base, end, and number of entries of the queue. Each queue entry + * contains a MAU register struct block. + * + * The privileged code then proceeds to add entries to the queue and + * then invoke the HV_NCS_QTAIL_UPDATE sub-function. Since only + * synchronous operations are supported by the current hypervisor, + * HV_NCS_QTAIL_UPDATE will run all the pending queue entries to + * completion and return HV_EOK, or return an error code. + * + * The real address of the sub-function argument must be aligned on at + * least an 8-byte boundary. + * + * The tail argument of HV_NCS_QTAIL_UPDATE is an index, not a byte + * offset, into the queue and must be less than or equal the 'num_ents' + * argument given in the HV_NCS_QCONF call. + */ +#define HV_FAST_NCS_REQUEST 0x110 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_ncs_request(unsigned long request, + unsigned long arg_ra, + unsigned long arg_size); +#endif + +#define HV_FAST_FIRE_GET_PERFREG 0x120 +#define HV_FAST_FIRE_SET_PERFREG 0x121 + +/* Function numbers for HV_CORE_TRAP. */ +#define HV_CORE_SET_VER 0x00 +#define HV_CORE_PUTCHAR 0x01 +#define HV_CORE_EXIT 0x02 +#define HV_CORE_GET_VER 0x03 + +/* Hypervisor API groups for use with HV_CORE_SET_VER and + * HV_CORE_GET_VER. + */ +#define HV_GRP_SUN4V 0x0000 +#define HV_GRP_CORE 0x0001 +#define HV_GRP_INTR 0x0002 +#define HV_GRP_SOFT_STATE 0x0003 +#define HV_GRP_PCI 0x0100 +#define HV_GRP_LDOM 0x0101 +#define HV_GRP_SVC_CHAN 0x0102 +#define HV_GRP_NCS 0x0103 +#define HV_GRP_RNG 0x0104 +#define HV_GRP_NIAG_PERF 0x0200 +#define HV_GRP_FIRE_PERF 0x0201 +#define HV_GRP_N2_CPU 0x0202 +#define HV_GRP_NIU 0x0204 +#define HV_GRP_VF_CPU 0x0205 +#define HV_GRP_DIAG 0x0300 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_get_version(unsigned long group, + unsigned long *major, + unsigned long *minor); +extern unsigned long sun4v_set_version(unsigned long group, + unsigned long major, + unsigned long minor, + unsigned long *actual_minor); + +extern int sun4v_hvapi_register(unsigned long group, unsigned long major, + unsigned long *minor); +extern void sun4v_hvapi_unregister(unsigned long group); +extern int sun4v_hvapi_get(unsigned long group, + unsigned long *major, + unsigned long *minor); +extern void sun4v_hvapi_init(void); +#endif + +#endif /* !(_SPARC64_HYPERVISOR_H) */ diff --git a/arch/sparc/include/asm/ide.h b/arch/sparc/include/asm/ide.h new file mode 100644 index 00000000000..b7af3d65823 --- /dev/null +++ b/arch/sparc/include/asm/ide.h @@ -0,0 +1,97 @@ +/* ide.h: SPARC PCI specific IDE glue. + * + * Copyright (C) 1997 David S. Miller (davem@davemloft.net) + * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) + * Adaptation from sparc64 version to sparc by Pete Zaitcev. + */ + +#ifndef _SPARC_IDE_H +#define _SPARC_IDE_H + +#ifdef __KERNEL__ + +#include <asm/io.h> +#ifdef CONFIG_SPARC64 +#include <asm/pgalloc.h> +#include <asm/spitfire.h> +#include <asm/cacheflush.h> +#include <asm/page.h> +#else +#include <asm/pgtable.h> +#include <asm/psr.h> +#endif + +#define __ide_insl(data_reg, buffer, wcount) \ + __ide_insw(data_reg, buffer, (wcount)<<1) +#define __ide_outsl(data_reg, buffer, wcount) \ + __ide_outsw(data_reg, buffer, (wcount)<<1) + +/* On sparc, I/O ports and MMIO registers are accessed identically. */ +#define __ide_mm_insw __ide_insw +#define __ide_mm_insl __ide_insl +#define __ide_mm_outsw __ide_outsw +#define __ide_mm_outsl __ide_outsl + +static inline void __ide_insw(void __iomem *port, void *dst, u32 count) +{ +#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE) + unsigned long end = (unsigned long)dst + (count << 1); +#endif + u16 *ps = dst; + u32 *pi; + + if(((unsigned long)ps) & 0x2) { + *ps++ = __raw_readw(port); + count--; + } + pi = (u32 *)ps; + while(count >= 2) { + u32 w; + + w = __raw_readw(port) << 16; + w |= __raw_readw(port); + *pi++ = w; + count -= 2; + } + ps = (u16 *)pi; + if(count) + *ps++ = __raw_readw(port); + +#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE) + __flush_dcache_range((unsigned long)dst, end); +#endif +} + +static inline void __ide_outsw(void __iomem *port, const void *src, u32 count) +{ +#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE) + unsigned long end = (unsigned long)src + (count << 1); +#endif + const u16 *ps = src; + const u32 *pi; + + if(((unsigned long)src) & 0x2) { + __raw_writew(*ps++, port); + count--; + } + pi = (const u32 *)ps; + while(count >= 2) { + u32 w; + + w = *pi++; + __raw_writew((w >> 16), port); + __raw_writew(w, port); + count -= 2; + } + ps = (const u16 *)pi; + if(count) + __raw_writew(*ps, port); + +#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE) + __flush_dcache_range((unsigned long)src, end); +#endif +} + +#endif /* __KERNEL__ */ + +#endif /* _SPARC_IDE_H */ diff --git a/arch/sparc/include/asm/idprom.h b/arch/sparc/include/asm/idprom.h new file mode 100644 index 00000000000..6976aa2439c --- /dev/null +++ b/arch/sparc/include/asm/idprom.h @@ -0,0 +1,25 @@ +/* + * idprom.h: Macros and defines for idprom routines + * + * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_IDPROM_H +#define _SPARC_IDPROM_H + +#include <linux/types.h> + +struct idprom { + u8 id_format; /* Format identifier (always 0x01) */ + u8 id_machtype; /* Machine type */ + u8 id_ethaddr[6]; /* Hardware ethernet address */ + s32 id_date; /* Date of manufacture */ + u32 id_sernum:24; /* Unique serial number */ + u8 id_cksum; /* Checksum - xor of the data bytes */ + u8 reserved[16]; +}; + +extern struct idprom *idprom; +extern void idprom_init(void); + +#endif /* !(_SPARC_IDPROM_H) */ diff --git a/arch/sparc/include/asm/intr_queue.h b/arch/sparc/include/asm/intr_queue.h new file mode 100644 index 00000000000..206077dedc2 --- /dev/null +++ b/arch/sparc/include/asm/intr_queue.h @@ -0,0 +1,15 @@ +#ifndef _SPARC64_INTR_QUEUE_H +#define _SPARC64_INTR_QUEUE_H + +/* Sun4v interrupt queue registers, accessed via ASI_QUEUE. */ + +#define INTRQ_CPU_MONDO_HEAD 0x3c0 /* CPU mondo head */ +#define INTRQ_CPU_MONDO_TAIL 0x3c8 /* CPU mondo tail */ +#define INTRQ_DEVICE_MONDO_HEAD 0x3d0 /* Device mondo head */ +#define INTRQ_DEVICE_MONDO_TAIL 0x3d8 /* Device mondo tail */ +#define INTRQ_RESUM_MONDO_HEAD 0x3e0 /* Resumable error mondo head */ +#define INTRQ_RESUM_MONDO_TAIL 0x3e8 /* Resumable error mondo tail */ +#define INTRQ_NONRESUM_MONDO_HEAD 0x3f0 /* Non-resumable error mondo head */ +#define INTRQ_NONRESUM_MONDO_TAIL 0x3f8 /* Non-resumable error mondo head */ + +#endif /* !(_SPARC64_INTR_QUEUE_H) */ diff --git a/arch/sparc/include/asm/io-unit.h b/arch/sparc/include/asm/io-unit.h new file mode 100644 index 00000000000..96823b47fd4 --- /dev/null +++ b/arch/sparc/include/asm/io-unit.h @@ -0,0 +1,62 @@ +/* io-unit.h: Definitions for the sun4d IO-UNIT. + * + * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ +#ifndef _SPARC_IO_UNIT_H +#define _SPARC_IO_UNIT_H + +#include <linux/spinlock.h> +#include <asm/page.h> +#include <asm/pgtable.h> + +/* The io-unit handles all virtual to physical address translations + * that occur between the SBUS and physical memory. Access by + * the cpu to IO registers and similar go over the xdbus so are + * translated by the on chip SRMMU. The io-unit and the srmmu do + * not need to have the same translations at all, in fact most + * of the time the translations they handle are a disjunct set. + * Basically the io-unit handles all dvma sbus activity. + */ + +/* AIEEE, unlike the nice sun4m, these monsters have + fixed DMA range 64M */ + +#define IOUNIT_DMA_BASE 0xfc000000 /* TOP - 64M */ +#define IOUNIT_DMA_SIZE 0x04000000 /* 64M */ +/* We use last 1M for sparc_dvma_malloc */ +#define IOUNIT_DVMA_SIZE 0x00100000 /* 1M */ + +/* The format of an iopte in the external page tables */ +#define IOUPTE_PAGE 0xffffff00 /* Physical page number (PA[35:12]) */ +#define IOUPTE_CACHE 0x00000080 /* Cached (in Viking/MXCC) */ +/* XXX Jakub, find out how to program SBUS streaming cache on XDBUS/sun4d. + * XXX Actually, all you should need to do is find out where the registers + * XXX are and copy over the sparc64 implementation I wrote. There may be + * XXX some horrible hwbugs though, so be careful. -DaveM + */ +#define IOUPTE_STREAM 0x00000040 /* Translation can use streaming cache */ +#define IOUPTE_INTRA 0x00000008 /* SBUS direct slot->slot transfer */ +#define IOUPTE_WRITE 0x00000004 /* Writeable */ +#define IOUPTE_VALID 0x00000002 /* IOPTE is valid */ +#define IOUPTE_PARITY 0x00000001 /* Parity is checked during DVMA */ + +struct iounit_struct { + unsigned long bmap[(IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 3)) / sizeof(unsigned long)]; + spinlock_t lock; + iopte_t *page_table; + unsigned long rotor[3]; + unsigned long limit[4]; +}; + +#define IOUNIT_BMAP1_START 0x00000000 +#define IOUNIT_BMAP1_END (IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 1)) +#define IOUNIT_BMAP2_START IOUNIT_BMAP1_END +#define IOUNIT_BMAP2_END IOUNIT_BMAP2_START + (IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 2)) +#define IOUNIT_BMAPM_START IOUNIT_BMAP2_END +#define IOUNIT_BMAPM_END ((IOUNIT_DMA_SIZE - IOUNIT_DVMA_SIZE) >> PAGE_SHIFT) + +extern __u32 iounit_map_dma_init(struct sbus_bus *, int); +#define iounit_map_dma_finish(sbus, addr, len) mmu_release_scsi_one(addr, len, sbus) +extern __u32 iounit_map_dma_page(__u32, void *, struct sbus_bus *); + +#endif /* !(_SPARC_IO_UNIT_H) */ diff --git a/arch/sparc/include/asm/io.h b/arch/sparc/include/asm/io.h new file mode 100644 index 00000000000..a34b2994937 --- /dev/null +++ b/arch/sparc/include/asm/io.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_IO_H +#define ___ASM_SPARC_IO_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/io_64.h> +#else +#include <asm/io_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/io_32.h b/arch/sparc/include/asm/io_32.h new file mode 100644 index 00000000000..10d7da45007 --- /dev/null +++ b/arch/sparc/include/asm/io_32.h @@ -0,0 +1,326 @@ +#ifndef __SPARC_IO_H +#define __SPARC_IO_H + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/ioport.h> /* struct resource */ + +#include <asm/page.h> /* IO address mapping routines need this */ +#include <asm/system.h> + +#define page_to_phys(page) (((page) - mem_map) << PAGE_SHIFT) + +static inline u32 flip_dword (u32 l) +{ + return ((l&0xff)<<24) | (((l>>8)&0xff)<<16) | (((l>>16)&0xff)<<8)| ((l>>24)&0xff); +} + +static inline u16 flip_word (u16 w) +{ + return ((w&0xff) << 8) | ((w>>8)&0xff); +} + +#define mmiowb() + +/* + * Memory mapped I/O to PCI + */ + +static inline u8 __raw_readb(const volatile void __iomem *addr) +{ + return *(__force volatile u8 *)addr; +} + +static inline u16 __raw_readw(const volatile void __iomem *addr) +{ + return *(__force volatile u16 *)addr; +} + +static inline u32 __raw_readl(const volatile void __iomem *addr) +{ + return *(__force volatile u32 *)addr; +} + +static inline void __raw_writeb(u8 b, volatile void __iomem *addr) +{ + *(__force volatile u8 *)addr = b; +} + +static inline void __raw_writew(u16 w, volatile void __iomem *addr) +{ + *(__force volatile u16 *)addr = w; +} + +static inline void __raw_writel(u32 l, volatile void __iomem *addr) +{ + *(__force volatile u32 *)addr = l; +} + +static inline u8 __readb(const volatile void __iomem *addr) +{ + return *(__force volatile u8 *)addr; +} + +static inline u16 __readw(const volatile void __iomem *addr) +{ + return flip_word(*(__force volatile u16 *)addr); +} + +static inline u32 __readl(const volatile void __iomem *addr) +{ + return flip_dword(*(__force volatile u32 *)addr); +} + +static inline void __writeb(u8 b, volatile void __iomem *addr) +{ + *(__force volatile u8 *)addr = b; +} + +static inline void __writew(u16 w, volatile void __iomem *addr) +{ + *(__force volatile u16 *)addr = flip_word(w); +} + +static inline void __writel(u32 l, volatile void __iomem *addr) +{ + *(__force volatile u32 *)addr = flip_dword(l); +} + +#define readb(__addr) __readb(__addr) +#define readw(__addr) __readw(__addr) +#define readl(__addr) __readl(__addr) +#define readb_relaxed(__addr) readb(__addr) +#define readw_relaxed(__addr) readw(__addr) +#define readl_relaxed(__addr) readl(__addr) + +#define writeb(__b, __addr) __writeb((__b),(__addr)) +#define writew(__w, __addr) __writew((__w),(__addr)) +#define writel(__l, __addr) __writel((__l),(__addr)) + +/* + * I/O space operations + * + * Arrangement on a Sun is somewhat complicated. + * + * First of all, we want to use standard Linux drivers + * for keyboard, PC serial, etc. These drivers think + * they access I/O space and use inb/outb. + * On the other hand, EBus bridge accepts PCI *memory* + * cycles and converts them into ISA *I/O* cycles. + * Ergo, we want inb & outb to generate PCI memory cycles. + * + * If we want to issue PCI *I/O* cycles, we do this + * with a low 64K fixed window in PCIC. This window gets + * mapped somewhere into virtual kernel space and we + * can use inb/outb again. + */ +#define inb_local(__addr) __readb((void __iomem *)(unsigned long)(__addr)) +#define inb(__addr) __readb((void __iomem *)(unsigned long)(__addr)) +#define inw(__addr) __readw((void __iomem *)(unsigned long)(__addr)) +#define inl(__addr) __readl((void __iomem *)(unsigned long)(__addr)) + +#define outb_local(__b, __addr) __writeb(__b, (void __iomem *)(unsigned long)(__addr)) +#define outb(__b, __addr) __writeb(__b, (void __iomem *)(unsigned long)(__addr)) +#define outw(__w, __addr) __writew(__w, (void __iomem *)(unsigned long)(__addr)) +#define outl(__l, __addr) __writel(__l, (void __iomem *)(unsigned long)(__addr)) + +#define inb_p(__addr) inb(__addr) +#define outb_p(__b, __addr) outb(__b, __addr) +#define inw_p(__addr) inw(__addr) +#define outw_p(__w, __addr) outw(__w, __addr) +#define inl_p(__addr) inl(__addr) +#define outl_p(__l, __addr) outl(__l, __addr) + +void outsb(unsigned long addr, const void *src, unsigned long cnt); +void outsw(unsigned long addr, const void *src, unsigned long cnt); +void outsl(unsigned long addr, const void *src, unsigned long cnt); +void insb(unsigned long addr, void *dst, unsigned long count); +void insw(unsigned long addr, void *dst, unsigned long count); +void insl(unsigned long addr, void *dst, unsigned long count); + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * SBus accessors. + * + * SBus has only one, memory mapped, I/O space. + * We do not need to flip bytes for SBus of course. + */ +static inline u8 _sbus_readb(const volatile void __iomem *addr) +{ + return *(__force volatile u8 *)addr; +} + +static inline u16 _sbus_readw(const volatile void __iomem *addr) +{ + return *(__force volatile u16 *)addr; +} + +static inline u32 _sbus_readl(const volatile void __iomem *addr) +{ + return *(__force volatile u32 *)addr; +} + +static inline void _sbus_writeb(u8 b, volatile void __iomem *addr) +{ + *(__force volatile u8 *)addr = b; +} + +static inline void _sbus_writew(u16 w, volatile void __iomem *addr) +{ + *(__force volatile u16 *)addr = w; +} + +static inline void _sbus_writel(u32 l, volatile void __iomem *addr) +{ + *(__force volatile u32 *)addr = l; +} + +/* + * The only reason for #define's is to hide casts to unsigned long. + */ +#define sbus_readb(__addr) _sbus_readb(__addr) +#define sbus_readw(__addr) _sbus_readw(__addr) +#define sbus_readl(__addr) _sbus_readl(__addr) +#define sbus_writeb(__b, __addr) _sbus_writeb(__b, __addr) +#define sbus_writew(__w, __addr) _sbus_writew(__w, __addr) +#define sbus_writel(__l, __addr) _sbus_writel(__l, __addr) + +static inline void sbus_memset_io(volatile void __iomem *__dst, int c, __kernel_size_t n) +{ + while(n--) { + sbus_writeb(c, __dst); + __dst++; + } +} + +static inline void +_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n) +{ + volatile void __iomem *d = dst; + + while (n--) { + writeb(c, d); + d++; + } +} + +#define memset_io(d,c,sz) _memset_io(d,c,sz) + +static inline void +_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n) +{ + char *d = dst; + + while (n--) { + char tmp = readb(src); + *d++ = tmp; + src++; + } +} + +#define memcpy_fromio(d,s,sz) _memcpy_fromio(d,s,sz) + +static inline void +_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n) +{ + const char *s = src; + volatile void __iomem *d = dst; + + while (n--) { + char tmp = *s++; + writeb(tmp, d); + d++; + } +} + +#define memcpy_toio(d,s,sz) _memcpy_toio(d,s,sz) + +#ifdef __KERNEL__ + +/* + * Bus number may be embedded in the higher bits of the physical address. + * This is why we have no bus number argument to ioremap(). + */ +extern void __iomem *ioremap(unsigned long offset, unsigned long size); +#define ioremap_nocache(X,Y) ioremap((X),(Y)) +#define ioremap_wc(X,Y) ioremap((X),(Y)) +extern void iounmap(volatile void __iomem *addr); + +#define ioread8(X) readb(X) +#define ioread16(X) readw(X) +#define ioread32(X) readl(X) +#define iowrite8(val,X) writeb(val,X) +#define iowrite16(val,X) writew(val,X) +#define iowrite32(val,X) writel(val,X) + +static inline void ioread8_rep(void __iomem *port, void *buf, unsigned long count) +{ + insb((unsigned long __force)port, buf, count); +} +static inline void ioread16_rep(void __iomem *port, void *buf, unsigned long count) +{ + insw((unsigned long __force)port, buf, count); +} + +static inline void ioread32_rep(void __iomem *port, void *buf, unsigned long count) +{ + insl((unsigned long __force)port, buf, count); +} + +static inline void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count) +{ + outsb((unsigned long __force)port, buf, count); +} + +static inline void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count) +{ + outsw((unsigned long __force)port, buf, count); +} + +static inline void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count) +{ + outsl((unsigned long __force)port, buf, count); +} + +/* Create a virtual mapping cookie for an IO port range */ +extern void __iomem *ioport_map(unsigned long port, unsigned int nr); +extern void ioport_unmap(void __iomem *); + +/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ +struct pci_dev; +extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); +extern void pci_iounmap(struct pci_dev *dev, void __iomem *); + +/* + * Bus number may be in res->flags... somewhere. + */ +extern void __iomem *sbus_ioremap(struct resource *res, unsigned long offset, + unsigned long size, char *name); +extern void sbus_iounmap(volatile void __iomem *vaddr, unsigned long size); + + +/* + * At the moment, we do not use CMOS_READ anywhere outside of rtc.c, + * so rtc_port is static in it. This should not change unless a new + * hardware pops up. + */ +#define RTC_PORT(x) (rtc_port + (x)) +#define RTC_ALWAYS_BCD 0 + +#endif + +#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED 1 + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* !(__SPARC_IO_H) */ diff --git a/arch/sparc/include/asm/io_64.h b/arch/sparc/include/asm/io_64.h new file mode 100644 index 00000000000..0bff078ffdd --- /dev/null +++ b/arch/sparc/include/asm/io_64.h @@ -0,0 +1,511 @@ +#ifndef __SPARC64_IO_H +#define __SPARC64_IO_H + +#include <linux/kernel.h> +#include <linux/compiler.h> +#include <linux/types.h> + +#include <asm/page.h> /* IO address mapping routines need this */ +#include <asm/system.h> +#include <asm/asi.h> + +/* PC crapola... */ +#define __SLOW_DOWN_IO do { } while (0) +#define SLOW_DOWN_IO do { } while (0) + +/* BIO layer definitions. */ +extern unsigned long kern_base, kern_size; +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + +static inline u8 _inb(unsigned long addr) +{ + u8 ret; + + __asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_inb */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); + + return ret; +} + +static inline u16 _inw(unsigned long addr) +{ + u16 ret; + + __asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_inw */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); + + return ret; +} + +static inline u32 _inl(unsigned long addr) +{ + u32 ret; + + __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_inl */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); + + return ret; +} + +static inline void _outb(u8 b, unsigned long addr) +{ + __asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_outb */" + : /* no outputs */ + : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); +} + +static inline void _outw(u16 w, unsigned long addr) +{ + __asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_outw */" + : /* no outputs */ + : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); +} + +static inline void _outl(u32 l, unsigned long addr) +{ + __asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_outl */" + : /* no outputs */ + : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); +} + +#define inb(__addr) (_inb((unsigned long)(__addr))) +#define inw(__addr) (_inw((unsigned long)(__addr))) +#define inl(__addr) (_inl((unsigned long)(__addr))) +#define outb(__b, __addr) (_outb((u8)(__b), (unsigned long)(__addr))) +#define outw(__w, __addr) (_outw((u16)(__w), (unsigned long)(__addr))) +#define outl(__l, __addr) (_outl((u32)(__l), (unsigned long)(__addr))) + +#define inb_p(__addr) inb(__addr) +#define outb_p(__b, __addr) outb(__b, __addr) +#define inw_p(__addr) inw(__addr) +#define outw_p(__w, __addr) outw(__w, __addr) +#define inl_p(__addr) inl(__addr) +#define outl_p(__l, __addr) outl(__l, __addr) + +extern void outsb(unsigned long, const void *, unsigned long); +extern void outsw(unsigned long, const void *, unsigned long); +extern void outsl(unsigned long, const void *, unsigned long); +extern void insb(unsigned long, void *, unsigned long); +extern void insw(unsigned long, void *, unsigned long); +extern void insl(unsigned long, void *, unsigned long); + +static inline void ioread8_rep(void __iomem *port, void *buf, unsigned long count) +{ + insb((unsigned long __force)port, buf, count); +} +static inline void ioread16_rep(void __iomem *port, void *buf, unsigned long count) +{ + insw((unsigned long __force)port, buf, count); +} + +static inline void ioread32_rep(void __iomem *port, void *buf, unsigned long count) +{ + insl((unsigned long __force)port, buf, count); +} + +static inline void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count) +{ + outsb((unsigned long __force)port, buf, count); +} + +static inline void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count) +{ + outsw((unsigned long __force)port, buf, count); +} + +static inline void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count) +{ + outsl((unsigned long __force)port, buf, count); +} + +/* Memory functions, same as I/O accesses on Ultra. */ +static inline u8 _readb(const volatile void __iomem *addr) +{ u8 ret; + + __asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_readb */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); + return ret; +} + +static inline u16 _readw(const volatile void __iomem *addr) +{ u16 ret; + + __asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_readw */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); + + return ret; +} + +static inline u32 _readl(const volatile void __iomem *addr) +{ u32 ret; + + __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_readl */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); + + return ret; +} + +static inline u64 _readq(const volatile void __iomem *addr) +{ u64 ret; + + __asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_readq */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); + + return ret; +} + +static inline void _writeb(u8 b, volatile void __iomem *addr) +{ + __asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_writeb */" + : /* no outputs */ + : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); +} + +static inline void _writew(u16 w, volatile void __iomem *addr) +{ + __asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_writew */" + : /* no outputs */ + : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); +} + +static inline void _writel(u32 l, volatile void __iomem *addr) +{ + __asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_writel */" + : /* no outputs */ + : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); +} + +static inline void _writeq(u64 q, volatile void __iomem *addr) +{ + __asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_writeq */" + : /* no outputs */ + : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); +} + +#define readb(__addr) _readb(__addr) +#define readw(__addr) _readw(__addr) +#define readl(__addr) _readl(__addr) +#define readq(__addr) _readq(__addr) +#define readb_relaxed(__addr) _readb(__addr) +#define readw_relaxed(__addr) _readw(__addr) +#define readl_relaxed(__addr) _readl(__addr) +#define readq_relaxed(__addr) _readq(__addr) +#define writeb(__b, __addr) _writeb(__b, __addr) +#define writew(__w, __addr) _writew(__w, __addr) +#define writel(__l, __addr) _writel(__l, __addr) +#define writeq(__q, __addr) _writeq(__q, __addr) + +/* Now versions without byte-swapping. */ +static inline u8 _raw_readb(unsigned long addr) +{ + u8 ret; + + __asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_raw_readb */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + + return ret; +} + +static inline u16 _raw_readw(unsigned long addr) +{ + u16 ret; + + __asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_raw_readw */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + + return ret; +} + +static inline u32 _raw_readl(unsigned long addr) +{ + u32 ret; + + __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_raw_readl */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + + return ret; +} + +static inline u64 _raw_readq(unsigned long addr) +{ + u64 ret; + + __asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_raw_readq */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + + return ret; +} + +static inline void _raw_writeb(u8 b, unsigned long addr) +{ + __asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_raw_writeb */" + : /* no outputs */ + : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); +} + +static inline void _raw_writew(u16 w, unsigned long addr) +{ + __asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_raw_writew */" + : /* no outputs */ + : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); +} + +static inline void _raw_writel(u32 l, unsigned long addr) +{ + __asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_raw_writel */" + : /* no outputs */ + : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); +} + +static inline void _raw_writeq(u64 q, unsigned long addr) +{ + __asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_raw_writeq */" + : /* no outputs */ + : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); +} + +#define __raw_readb(__addr) (_raw_readb((unsigned long)(__addr))) +#define __raw_readw(__addr) (_raw_readw((unsigned long)(__addr))) +#define __raw_readl(__addr) (_raw_readl((unsigned long)(__addr))) +#define __raw_readq(__addr) (_raw_readq((unsigned long)(__addr))) +#define __raw_writeb(__b, __addr) (_raw_writeb((u8)(__b), (unsigned long)(__addr))) +#define __raw_writew(__w, __addr) (_raw_writew((u16)(__w), (unsigned long)(__addr))) +#define __raw_writel(__l, __addr) (_raw_writel((u32)(__l), (unsigned long)(__addr))) +#define __raw_writeq(__q, __addr) (_raw_writeq((u64)(__q), (unsigned long)(__addr))) + +/* Valid I/O Space regions are anywhere, because each PCI bus supported + * can live in an arbitrary area of the physical address range. + */ +#define IO_SPACE_LIMIT 0xffffffffffffffffUL + +/* Now, SBUS variants, only difference from PCI is that we do + * not use little-endian ASIs. + */ +static inline u8 _sbus_readb(const volatile void __iomem *addr) +{ + u8 ret; + + __asm__ __volatile__("lduba\t[%1] %2, %0\t/* sbus_readb */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); + + return ret; +} + +static inline u16 _sbus_readw(const volatile void __iomem *addr) +{ + u16 ret; + + __asm__ __volatile__("lduha\t[%1] %2, %0\t/* sbus_readw */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); + + return ret; +} + +static inline u32 _sbus_readl(const volatile void __iomem *addr) +{ + u32 ret; + + __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* sbus_readl */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); + + return ret; +} + +static inline u64 _sbus_readq(const volatile void __iomem *addr) +{ + u64 ret; + + __asm__ __volatile__("ldxa\t[%1] %2, %0\t/* sbus_readq */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); + + return ret; +} + +static inline void _sbus_writeb(u8 b, volatile void __iomem *addr) +{ + __asm__ __volatile__("stba\t%r0, [%1] %2\t/* sbus_writeb */" + : /* no outputs */ + : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); +} + +static inline void _sbus_writew(u16 w, volatile void __iomem *addr) +{ + __asm__ __volatile__("stha\t%r0, [%1] %2\t/* sbus_writew */" + : /* no outputs */ + : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); +} + +static inline void _sbus_writel(u32 l, volatile void __iomem *addr) +{ + __asm__ __volatile__("stwa\t%r0, [%1] %2\t/* sbus_writel */" + : /* no outputs */ + : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); +} + +static inline void _sbus_writeq(u64 l, volatile void __iomem *addr) +{ + __asm__ __volatile__("stxa\t%r0, [%1] %2\t/* sbus_writeq */" + : /* no outputs */ + : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); +} + +#define sbus_readb(__addr) _sbus_readb(__addr) +#define sbus_readw(__addr) _sbus_readw(__addr) +#define sbus_readl(__addr) _sbus_readl(__addr) +#define sbus_readq(__addr) _sbus_readq(__addr) +#define sbus_writeb(__b, __addr) _sbus_writeb(__b, __addr) +#define sbus_writew(__w, __addr) _sbus_writew(__w, __addr) +#define sbus_writel(__l, __addr) _sbus_writel(__l, __addr) +#define sbus_writeq(__l, __addr) _sbus_writeq(__l, __addr) + +static inline void _sbus_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n) +{ + while(n--) { + sbus_writeb(c, dst); + dst++; + } +} + +#define sbus_memset_io(d,c,sz) _sbus_memset_io(d,c,sz) + +static inline void +_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n) +{ + volatile void __iomem *d = dst; + + while (n--) { + writeb(c, d); + d++; + } +} + +#define memset_io(d,c,sz) _memset_io(d,c,sz) + +static inline void +_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n) +{ + char *d = dst; + + while (n--) { + char tmp = readb(src); + *d++ = tmp; + src++; + } +} + +#define memcpy_fromio(d,s,sz) _memcpy_fromio(d,s,sz) + +static inline void +_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n) +{ + const char *s = src; + volatile void __iomem *d = dst; + + while (n--) { + char tmp = *s++; + writeb(tmp, d); + d++; + } +} + +#define memcpy_toio(d,s,sz) _memcpy_toio(d,s,sz) + +#define mmiowb() + +#ifdef __KERNEL__ + +/* On sparc64 we have the whole physical IO address space accessible + * using physically addressed loads and stores, so this does nothing. + */ +static inline void __iomem *ioremap(unsigned long offset, unsigned long size) +{ + return (void __iomem *)offset; +} + +#define ioremap_nocache(X,Y) ioremap((X),(Y)) +#define ioremap_wc(X,Y) ioremap((X),(Y)) + +static inline void iounmap(volatile void __iomem *addr) +{ +} + +#define ioread8(X) readb(X) +#define ioread16(X) readw(X) +#define ioread32(X) readl(X) +#define iowrite8(val,X) writeb(val,X) +#define iowrite16(val,X) writew(val,X) +#define iowrite32(val,X) writel(val,X) + +/* Create a virtual mapping cookie for an IO port range */ +extern void __iomem *ioport_map(unsigned long port, unsigned int nr); +extern void ioport_unmap(void __iomem *); + +/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ +struct pci_dev; +extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); +extern void pci_iounmap(struct pci_dev *dev, void __iomem *); + +/* Similarly for SBUS. */ +#define sbus_ioremap(__res, __offset, __size, __name) \ +({ unsigned long __ret; \ + __ret = (__res)->start + (((__res)->flags & 0x1ffUL) << 32UL); \ + __ret += (unsigned long) (__offset); \ + if (! request_region((__ret), (__size), (__name))) \ + __ret = 0UL; \ + (void __iomem *) __ret; \ +}) + +#define sbus_iounmap(__addr, __size) \ + release_region((unsigned long)(__addr), (__size)) + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif + +#endif /* !(__SPARC64_IO_H) */ diff --git a/arch/sparc/include/asm/ioctl.h b/arch/sparc/include/asm/ioctl.h new file mode 100644 index 00000000000..7d6bd51321b --- /dev/null +++ b/arch/sparc/include/asm/ioctl.h @@ -0,0 +1,67 @@ +#ifndef _SPARC_IOCTL_H +#define _SPARC_IOCTL_H + +/* + * Our DIR and SIZE overlap in order to simulteneously provide + * a non-zero _IOC_NONE (for binary compatibility) and + * 14 bits of size as on i386. Here's the layout: + * + * 0xE0000000 DIR + * 0x80000000 DIR = WRITE + * 0x40000000 DIR = READ + * 0x20000000 DIR = NONE + * 0x3FFF0000 SIZE (overlaps NONE bit) + * 0x0000FF00 TYPE + * 0x000000FF NR (CMD) + */ + +#define _IOC_NRBITS 8 +#define _IOC_TYPEBITS 8 +#define _IOC_SIZEBITS 13 /* Actually 14, see below. */ +#define _IOC_DIRBITS 3 + +#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1) +#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1) +#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1) +#define _IOC_XSIZEMASK ((1 << (_IOC_SIZEBITS+1))-1) +#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1) + +#define _IOC_NRSHIFT 0 +#define _IOC_TYPESHIFT (_IOC_NRSHIFT + _IOC_NRBITS) +#define _IOC_SIZESHIFT (_IOC_TYPESHIFT + _IOC_TYPEBITS) +#define _IOC_DIRSHIFT (_IOC_SIZESHIFT + _IOC_SIZEBITS) + +#define _IOC_NONE 1U +#define _IOC_READ 2U +#define _IOC_WRITE 4U + +#define _IOC(dir,type,nr,size) \ + (((dir) << _IOC_DIRSHIFT) | \ + ((type) << _IOC_TYPESHIFT) | \ + ((nr) << _IOC_NRSHIFT) | \ + ((size) << _IOC_SIZESHIFT)) + +#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0) +#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size)) +#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size)) +#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size)) + +/* Used to decode ioctl numbers in drivers despite the leading underscore... */ +#define _IOC_DIR(nr) \ + ( (((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) != 0)? \ + (((nr) >> _IOC_DIRSHIFT) & (_IOC_WRITE|_IOC_READ)): \ + (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) ) +#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK) +#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK) +#define _IOC_SIZE(nr) \ + ((((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) == 0)? \ + 0: (((nr) >> _IOC_SIZESHIFT) & _IOC_XSIZEMASK)) + +/* ...and for the PCMCIA and sound. */ +#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT) +#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT) +#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT) +#define IOCSIZE_MASK (_IOC_XSIZEMASK << _IOC_SIZESHIFT) +#define IOCSIZE_SHIFT (_IOC_SIZESHIFT) + +#endif /* !(_SPARC_IOCTL_H) */ diff --git a/arch/sparc/include/asm/ioctls.h b/arch/sparc/include/asm/ioctls.h new file mode 100644 index 00000000000..1fe6855c5c1 --- /dev/null +++ b/arch/sparc/include/asm/ioctls.h @@ -0,0 +1,136 @@ +#ifndef _ASM_SPARC_IOCTLS_H +#define _ASM_SPARC_IOCTLS_H + +#include <asm/ioctl.h> + +/* Big T */ +#define TCGETA _IOR('T', 1, struct termio) +#define TCSETA _IOW('T', 2, struct termio) +#define TCSETAW _IOW('T', 3, struct termio) +#define TCSETAF _IOW('T', 4, struct termio) +#define TCSBRK _IO('T', 5) +#define TCXONC _IO('T', 6) +#define TCFLSH _IO('T', 7) +#define TCGETS _IOR('T', 8, struct termios) +#define TCSETS _IOW('T', 9, struct termios) +#define TCSETSW _IOW('T', 10, struct termios) +#define TCSETSF _IOW('T', 11, struct termios) +#define TCGETS2 _IOR('T', 12, struct termios2) +#define TCSETS2 _IOW('T', 13, struct termios2) +#define TCSETSW2 _IOW('T', 14, struct termios2) +#define TCSETSF2 _IOW('T', 15, struct termios2) + +/* Note that all the ioctls that are not available in Linux have a + * double underscore on the front to: a) avoid some programs to + * think we support some ioctls under Linux (autoconfiguration stuff) + */ +/* Little t */ +#define TIOCGETD _IOR('t', 0, int) +#define TIOCSETD _IOW('t', 1, int) +#define __TIOCHPCL _IO('t', 2) /* SunOS Specific */ +#define __TIOCMODG _IOR('t', 3, int) /* SunOS Specific */ +#define __TIOCMODS _IOW('t', 4, int) /* SunOS Specific */ +#define __TIOCGETP _IOR('t', 8, struct sgttyb) /* SunOS Specific */ +#define __TIOCSETP _IOW('t', 9, struct sgttyb) /* SunOS Specific */ +#define __TIOCSETN _IOW('t', 10, struct sgttyb) /* SunOS Specific */ +#define TIOCEXCL _IO('t', 13) +#define TIOCNXCL _IO('t', 14) +#define __TIOCFLUSH _IOW('t', 16, int) /* SunOS Specific */ +#define __TIOCSETC _IOW('t', 17, struct tchars) /* SunOS Specific */ +#define __TIOCGETC _IOR('t', 18, struct tchars) /* SunOS Specific */ +#define __TIOCTCNTL _IOW('t', 32, int) /* SunOS Specific */ +#define __TIOCSIGNAL _IOW('t', 33, int) /* SunOS Specific */ +#define __TIOCSETX _IOW('t', 34, int) /* SunOS Specific */ +#define __TIOCGETX _IOR('t', 35, int) /* SunOS Specific */ +#define TIOCCONS _IO('t', 36) +#define TIOCGSOFTCAR _IOR('t', 100, int) +#define TIOCSSOFTCAR _IOW('t', 101, int) +#define __TIOCUCNTL _IOW('t', 102, int) /* SunOS Specific */ +#define TIOCSWINSZ _IOW('t', 103, struct winsize) +#define TIOCGWINSZ _IOR('t', 104, struct winsize) +#define __TIOCREMOTE _IOW('t', 105, int) /* SunOS Specific */ +#define TIOCMGET _IOR('t', 106, int) +#define TIOCMBIC _IOW('t', 107, int) +#define TIOCMBIS _IOW('t', 108, int) +#define TIOCMSET _IOW('t', 109, int) +#define TIOCSTART _IO('t', 110) +#define TIOCSTOP _IO('t', 111) +#define TIOCPKT _IOW('t', 112, int) +#define TIOCNOTTY _IO('t', 113) +#define TIOCSTI _IOW('t', 114, char) +#define TIOCOUTQ _IOR('t', 115, int) +#define __TIOCGLTC _IOR('t', 116, struct ltchars) /* SunOS Specific */ +#define __TIOCSLTC _IOW('t', 117, struct ltchars) /* SunOS Specific */ +/* 118 is the non-posix setpgrp tty ioctl */ +/* 119 is the non-posix getpgrp tty ioctl */ +#define __TIOCCDTR _IO('t', 120) /* SunOS Specific */ +#define __TIOCSDTR _IO('t', 121) /* SunOS Specific */ +#define TIOCCBRK _IO('t', 122) +#define TIOCSBRK _IO('t', 123) +#define __TIOCLGET _IOW('t', 124, int) /* SunOS Specific */ +#define __TIOCLSET _IOW('t', 125, int) /* SunOS Specific */ +#define __TIOCLBIC _IOW('t', 126, int) /* SunOS Specific */ +#define __TIOCLBIS _IOW('t', 127, int) /* SunOS Specific */ +#define __TIOCISPACE _IOR('t', 128, int) /* SunOS Specific */ +#define __TIOCISIZE _IOR('t', 129, int) /* SunOS Specific */ +#define TIOCSPGRP _IOW('t', 130, int) +#define TIOCGPGRP _IOR('t', 131, int) +#define TIOCSCTTY _IO('t', 132) +#define TIOCGSID _IOR('t', 133, int) +/* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */ +#define TIOCGPTN _IOR('t', 134, unsigned int) /* Get Pty Number */ +#define TIOCSPTLCK _IOW('t', 135, int) /* Lock/unlock PTY */ + +/* Little f */ +#define FIOCLEX _IO('f', 1) +#define FIONCLEX _IO('f', 2) +#define FIOASYNC _IOW('f', 125, int) +#define FIONBIO _IOW('f', 126, int) +#define FIONREAD _IOR('f', 127, int) +#define TIOCINQ FIONREAD +#define FIOQSIZE _IOR('f', 128, loff_t) + +/* SCARY Rutgers local SunOS kernel hackery, perhaps I will support it + * someday. This is completely bogus, I know... + */ +#define __TCGETSTAT _IO('T', 200) /* Rutgers specific */ +#define __TCSETSTAT _IO('T', 201) /* Rutgers specific */ + +/* Linux specific, no SunOS equivalent. */ +#define TIOCLINUX 0x541C +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TCSBRKP 0x5425 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ +#define TIOCMIWAIT 0x545C /* Wait for change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* Read serial port inline interrupt counts */ + +/* Kernel definitions */ +#ifdef __KERNEL__ +#define TIOCGETC __TIOCGETC +#define TIOCGETP __TIOCGETP +#define TIOCGLTC __TIOCGLTC +#define TIOCSLTC __TIOCSLTC +#define TIOCSETP __TIOCSETP +#define TIOCSETN __TIOCSETN +#define TIOCSETC __TIOCSETC +#endif + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#endif /* !(_ASM_SPARC_IOCTLS_H) */ diff --git a/arch/sparc/include/asm/iommu.h b/arch/sparc/include/asm/iommu.h new file mode 100644 index 00000000000..e650965b4a8 --- /dev/null +++ b/arch/sparc/include/asm/iommu.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_IOMMU_H +#define ___ASM_SPARC_IOMMU_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/iommu_64.h> +#else +#include <asm/iommu_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/iommu_32.h b/arch/sparc/include/asm/iommu_32.h new file mode 100644 index 00000000000..70c589c05a1 --- /dev/null +++ b/arch/sparc/include/asm/iommu_32.h @@ -0,0 +1,121 @@ +/* iommu.h: Definitions for the sun4m IOMMU. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + */ +#ifndef _SPARC_IOMMU_H +#define _SPARC_IOMMU_H + +#include <asm/page.h> +#include <asm/bitext.h> + +/* The iommu handles all virtual to physical address translations + * that occur between the SBUS and physical memory. Access by + * the cpu to IO registers and similar go over the mbus so are + * translated by the on chip SRMMU. The iommu and the srmmu do + * not need to have the same translations at all, in fact most + * of the time the translations they handle are a disjunct set. + * Basically the iommu handles all dvma sbus activity. + */ + +/* The IOMMU registers occupy three pages in IO space. */ +struct iommu_regs { + /* First page */ + volatile unsigned long control; /* IOMMU control */ + volatile unsigned long base; /* Physical base of iopte page table */ + volatile unsigned long _unused1[3]; + volatile unsigned long tlbflush; /* write only */ + volatile unsigned long pageflush; /* write only */ + volatile unsigned long _unused2[1017]; + /* Second page */ + volatile unsigned long afsr; /* Async-fault status register */ + volatile unsigned long afar; /* Async-fault physical address */ + volatile unsigned long _unused3[2]; + volatile unsigned long sbuscfg0; /* SBUS configuration registers, per-slot */ + volatile unsigned long sbuscfg1; + volatile unsigned long sbuscfg2; + volatile unsigned long sbuscfg3; + volatile unsigned long mfsr; /* Memory-fault status register */ + volatile unsigned long mfar; /* Memory-fault physical address */ + volatile unsigned long _unused4[1014]; + /* Third page */ + volatile unsigned long mid; /* IOMMU module-id */ +}; + +#define IOMMU_CTRL_IMPL 0xf0000000 /* Implementation */ +#define IOMMU_CTRL_VERS 0x0f000000 /* Version */ +#define IOMMU_CTRL_RNGE 0x0000001c /* Mapping RANGE */ +#define IOMMU_RNGE_16MB 0x00000000 /* 0xff000000 -> 0xffffffff */ +#define IOMMU_RNGE_32MB 0x00000004 /* 0xfe000000 -> 0xffffffff */ +#define IOMMU_RNGE_64MB 0x00000008 /* 0xfc000000 -> 0xffffffff */ +#define IOMMU_RNGE_128MB 0x0000000c /* 0xf8000000 -> 0xffffffff */ +#define IOMMU_RNGE_256MB 0x00000010 /* 0xf0000000 -> 0xffffffff */ +#define IOMMU_RNGE_512MB 0x00000014 /* 0xe0000000 -> 0xffffffff */ +#define IOMMU_RNGE_1GB 0x00000018 /* 0xc0000000 -> 0xffffffff */ +#define IOMMU_RNGE_2GB 0x0000001c /* 0x80000000 -> 0xffffffff */ +#define IOMMU_CTRL_ENAB 0x00000001 /* IOMMU Enable */ + +#define IOMMU_AFSR_ERR 0x80000000 /* LE, TO, or BE asserted */ +#define IOMMU_AFSR_LE 0x40000000 /* SBUS reports error after transaction */ +#define IOMMU_AFSR_TO 0x20000000 /* Write access took more than 12.8 us. */ +#define IOMMU_AFSR_BE 0x10000000 /* Write access received error acknowledge */ +#define IOMMU_AFSR_SIZE 0x0e000000 /* Size of transaction causing error */ +#define IOMMU_AFSR_S 0x01000000 /* Sparc was in supervisor mode */ +#define IOMMU_AFSR_RESV 0x00f00000 /* Reserver, forced to 0x8 by hardware */ +#define IOMMU_AFSR_ME 0x00080000 /* Multiple errors occurred */ +#define IOMMU_AFSR_RD 0x00040000 /* A read operation was in progress */ +#define IOMMU_AFSR_FAV 0x00020000 /* IOMMU afar has valid contents */ + +#define IOMMU_SBCFG_SAB30 0x00010000 /* Phys-address bit 30 when bypass enabled */ +#define IOMMU_SBCFG_BA16 0x00000004 /* Slave supports 16 byte bursts */ +#define IOMMU_SBCFG_BA8 0x00000002 /* Slave supports 8 byte bursts */ +#define IOMMU_SBCFG_BYPASS 0x00000001 /* Bypass IOMMU, treat all addresses + produced by this device as pure + physical. */ + +#define IOMMU_MFSR_ERR 0x80000000 /* One or more of PERR1 or PERR0 */ +#define IOMMU_MFSR_S 0x01000000 /* Sparc was in supervisor mode */ +#define IOMMU_MFSR_CPU 0x00800000 /* CPU transaction caused parity error */ +#define IOMMU_MFSR_ME 0x00080000 /* Multiple parity errors occurred */ +#define IOMMU_MFSR_PERR 0x00006000 /* high bit indicates parity error occurred + on the even word of the access, low bit + indicated odd word caused the parity error */ +#define IOMMU_MFSR_BM 0x00001000 /* Error occurred while in boot mode */ +#define IOMMU_MFSR_C 0x00000800 /* Address causing error was marked cacheable */ +#define IOMMU_MFSR_RTYP 0x000000f0 /* Memory request transaction type */ + +#define IOMMU_MID_SBAE 0x001f0000 /* SBus arbitration enable */ +#define IOMMU_MID_SE 0x00100000 /* Enables SCSI/ETHERNET arbitration */ +#define IOMMU_MID_SB3 0x00080000 /* Enable SBUS device 3 arbitration */ +#define IOMMU_MID_SB2 0x00040000 /* Enable SBUS device 2 arbitration */ +#define IOMMU_MID_SB1 0x00020000 /* Enable SBUS device 1 arbitration */ +#define IOMMU_MID_SB0 0x00010000 /* Enable SBUS device 0 arbitration */ +#define IOMMU_MID_MID 0x0000000f /* Module-id, hardcoded to 0x8 */ + +/* The format of an iopte in the page tables */ +#define IOPTE_PAGE 0x07ffff00 /* Physical page number (PA[30:12]) */ +#define IOPTE_CACHE 0x00000080 /* Cached (in vme IOCACHE or Viking/MXCC) */ +#define IOPTE_WRITE 0x00000004 /* Writeable */ +#define IOPTE_VALID 0x00000002 /* IOPTE is valid */ +#define IOPTE_WAZ 0x00000001 /* Write as zeros */ + +struct iommu_struct { + struct iommu_regs *regs; + iopte_t *page_table; + /* For convenience */ + unsigned long start; /* First managed virtual address */ + unsigned long end; /* Last managed virtual address */ + + struct bit_map usemap; +}; + +static inline void iommu_invalidate(struct iommu_regs *regs) +{ + regs->tlbflush = 0; +} + +static inline void iommu_invalidate_page(struct iommu_regs *regs, unsigned long ba) +{ + regs->pageflush = (ba & PAGE_MASK); +} + +#endif /* !(_SPARC_IOMMU_H) */ diff --git a/arch/sparc/include/asm/iommu_64.h b/arch/sparc/include/asm/iommu_64.h new file mode 100644 index 00000000000..d7b9afcba08 --- /dev/null +++ b/arch/sparc/include/asm/iommu_64.h @@ -0,0 +1,62 @@ +/* iommu.h: Definitions for the sun5 IOMMU. + * + * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net) + */ +#ifndef _SPARC64_IOMMU_H +#define _SPARC64_IOMMU_H + +/* The format of an iopte in the page tables. */ +#define IOPTE_VALID 0x8000000000000000UL +#define IOPTE_64K 0x2000000000000000UL +#define IOPTE_STBUF 0x1000000000000000UL +#define IOPTE_INTRA 0x0800000000000000UL +#define IOPTE_CONTEXT 0x07ff800000000000UL +#define IOPTE_PAGE 0x00007fffffffe000UL +#define IOPTE_CACHE 0x0000000000000010UL +#define IOPTE_WRITE 0x0000000000000002UL + +#define IOMMU_NUM_CTXS 4096 + +struct iommu_arena { + unsigned long *map; + unsigned int hint; + unsigned int limit; +}; + +struct iommu { + spinlock_t lock; + struct iommu_arena arena; + void (*flush_all)(struct iommu *); + iopte_t *page_table; + u32 page_table_map_base; + unsigned long iommu_control; + unsigned long iommu_tsbbase; + unsigned long iommu_flush; + unsigned long iommu_flushinv; + unsigned long iommu_tags; + unsigned long iommu_ctxflush; + unsigned long write_complete_reg; + unsigned long dummy_page; + unsigned long dummy_page_pa; + unsigned long ctx_lowest_free; + DECLARE_BITMAP(ctx_bitmap, IOMMU_NUM_CTXS); + u32 dma_addr_mask; +}; + +struct strbuf { + int strbuf_enabled; + unsigned long strbuf_control; + unsigned long strbuf_pflush; + unsigned long strbuf_fsync; + unsigned long strbuf_ctxflush; + unsigned long strbuf_ctxmatch_base; + unsigned long strbuf_flushflag_pa; + volatile unsigned long *strbuf_flushflag; + volatile unsigned long __flushflag_buf[(64+(64-1)) / sizeof(long)]; +}; + +extern int iommu_table_init(struct iommu *iommu, int tsbsize, + u32 dma_offset, u32 dma_addr_mask, + int numa_node); + +#endif /* !(_SPARC64_IOMMU_H) */ diff --git a/arch/sparc/include/asm/ipcbuf.h b/arch/sparc/include/asm/ipcbuf.h new file mode 100644 index 00000000000..17d6ef7b23a --- /dev/null +++ b/arch/sparc/include/asm/ipcbuf.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_IPCBUF_H +#define ___ASM_SPARC_IPCBUF_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/ipcbuf_64.h> +#else +#include <asm/ipcbuf_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/ipcbuf_32.h b/arch/sparc/include/asm/ipcbuf_32.h new file mode 100644 index 00000000000..6387209518f --- /dev/null +++ b/arch/sparc/include/asm/ipcbuf_32.h @@ -0,0 +1,31 @@ +#ifndef _SPARC_IPCBUF_H +#define _SPARC_IPCBUF_H + +/* + * The ipc64_perm structure for sparc architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode + * - 32-bit seq + * - 2 miscellaneous 64-bit values (so that this structure matches + * sparc64 ipc64_perm) + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + unsigned short __pad1; + __kernel_mode_t mode; + unsigned short __pad2; + unsigned short seq; + unsigned long long __unused1; + unsigned long long __unused2; +}; + +#endif /* _SPARC_IPCBUF_H */ diff --git a/arch/sparc/include/asm/ipcbuf_64.h b/arch/sparc/include/asm/ipcbuf_64.h new file mode 100644 index 00000000000..a44b855b98d --- /dev/null +++ b/arch/sparc/include/asm/ipcbuf_64.h @@ -0,0 +1,28 @@ +#ifndef _SPARC64_IPCBUF_H +#define _SPARC64_IPCBUF_H + +/* + * The ipc64_perm structure for sparc64 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit seq + * - 2 miscellaneous 64-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid_t uid; + __kernel_gid_t gid; + __kernel_uid_t cuid; + __kernel_gid_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _SPARC64_IPCBUF_H */ diff --git a/arch/sparc/include/asm/irq.h b/arch/sparc/include/asm/irq.h new file mode 100644 index 00000000000..3b44a6a1407 --- /dev/null +++ b/arch/sparc/include/asm/irq.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_IRQ_H +#define ___ASM_SPARC_IRQ_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/irq_64.h> +#else +#include <asm/irq_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/irq_32.h b/arch/sparc/include/asm/irq_32.h new file mode 100644 index 00000000000..fe205cc444b --- /dev/null +++ b/arch/sparc/include/asm/irq_32.h @@ -0,0 +1,15 @@ +/* irq.h: IRQ registers on the Sparc. + * + * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net) + */ + +#ifndef _SPARC_IRQ_H +#define _SPARC_IRQ_H + +#include <linux/interrupt.h> + +#define NR_IRQS 16 + +#define irq_canonicalize(irq) (irq) + +#endif diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h new file mode 100644 index 00000000000..0bb9bf53174 --- /dev/null +++ b/arch/sparc/include/asm/irq_64.h @@ -0,0 +1,93 @@ +/* irq.h: IRQ registers on the 64-bit Sparc. + * + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) + * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz) + */ + +#ifndef _SPARC64_IRQ_H +#define _SPARC64_IRQ_H + +#include <linux/linkage.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <asm/pil.h> +#include <asm/ptrace.h> + +/* IMAP/ICLR register defines */ +#define IMAP_VALID 0x80000000UL /* IRQ Enabled */ +#define IMAP_TID_UPA 0x7c000000UL /* UPA TargetID */ +#define IMAP_TID_JBUS 0x7c000000UL /* JBUS TargetID */ +#define IMAP_TID_SHIFT 26 +#define IMAP_AID_SAFARI 0x7c000000UL /* Safari AgentID */ +#define IMAP_AID_SHIFT 26 +#define IMAP_NID_SAFARI 0x03e00000UL /* Safari NodeID */ +#define IMAP_NID_SHIFT 21 +#define IMAP_IGN 0x000007c0UL /* IRQ Group Number */ +#define IMAP_INO 0x0000003fUL /* IRQ Number */ +#define IMAP_INR 0x000007ffUL /* Full interrupt number*/ + +#define ICLR_IDLE 0x00000000UL /* Idle state */ +#define ICLR_TRANSMIT 0x00000001UL /* Transmit state */ +#define ICLR_PENDING 0x00000003UL /* Pending state */ + +/* The largest number of unique interrupt sources we support. + * If this needs to ever be larger than 255, you need to change + * the type of ino_bucket->virt_irq as appropriate. + * + * ino_bucket->virt_irq allocation is made during {sun4v_,}build_irq(). + */ +#define NR_IRQS 255 + +extern void irq_install_pre_handler(int virt_irq, + void (*func)(unsigned int, void *, void *), + void *arg1, void *arg2); +#define irq_canonicalize(irq) (irq) +extern unsigned int build_irq(int inofixup, unsigned long iclr, unsigned long imap); +extern unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino); +extern unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino); +extern unsigned int sun4v_build_msi(u32 devhandle, unsigned int *virt_irq_p, + unsigned int msi_devino_start, + unsigned int msi_devino_end); +extern void sun4v_destroy_msi(unsigned int virt_irq); +extern unsigned int sun4u_build_msi(u32 portid, unsigned int *virt_irq_p, + unsigned int msi_devino_start, + unsigned int msi_devino_end, + unsigned long imap_base, + unsigned long iclr_base); +extern void sun4u_destroy_msi(unsigned int virt_irq); +extern unsigned int sbus_build_irq(void *sbus, unsigned int ino); + +extern unsigned char virt_irq_alloc(unsigned int dev_handle, + unsigned int dev_ino); +#ifdef CONFIG_PCI_MSI +extern void virt_irq_free(unsigned int virt_irq); +#endif + +extern void __init init_IRQ(void); +extern void fixup_irqs(void); + +static inline void set_softint(unsigned long bits) +{ + __asm__ __volatile__("wr %0, 0x0, %%set_softint" + : /* No outputs */ + : "r" (bits)); +} + +static inline void clear_softint(unsigned long bits) +{ + __asm__ __volatile__("wr %0, 0x0, %%clear_softint" + : /* No outputs */ + : "r" (bits)); +} + +static inline unsigned long get_softint(void) +{ + unsigned long retval; + + __asm__ __volatile__("rd %%softint, %0" + : "=r" (retval)); + return retval; +} + +#endif diff --git a/arch/sparc/include/asm/irq_regs.h b/arch/sparc/include/asm/irq_regs.h new file mode 100644 index 00000000000..3dd9c0b7027 --- /dev/null +++ b/arch/sparc/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include <asm-generic/irq_regs.h> diff --git a/arch/sparc/include/asm/irqflags.h b/arch/sparc/include/asm/irqflags.h new file mode 100644 index 00000000000..1e138632bd3 --- /dev/null +++ b/arch/sparc/include/asm/irqflags.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_IRQFLAGS_H +#define ___ASM_SPARC_IRQFLAGS_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/irqflags_64.h> +#else +#include <asm/irqflags_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/irqflags_32.h b/arch/sparc/include/asm/irqflags_32.h new file mode 100644 index 00000000000..0fca9d97d44 --- /dev/null +++ b/arch/sparc/include/asm/irqflags_32.h @@ -0,0 +1,39 @@ +/* + * include/asm/irqflags.h + * + * IRQ flags handling + * + * This file gets included from lowlevel asm headers too, to provide + * wrapped versions of the local_irq_*() APIs, based on the + * raw_local_irq_*() functions from the lowlevel headers. + */ +#ifndef _ASM_IRQFLAGS_H +#define _ASM_IRQFLAGS_H + +#ifndef __ASSEMBLY__ + +extern void raw_local_irq_restore(unsigned long); +extern unsigned long __raw_local_irq_save(void); +extern void raw_local_irq_enable(void); + +static inline unsigned long getipl(void) +{ + unsigned long retval; + + __asm__ __volatile__("rd %%psr, %0" : "=r" (retval)); + return retval; +} + +#define raw_local_save_flags(flags) ((flags) = getipl()) +#define raw_local_irq_save(flags) ((flags) = __raw_local_irq_save()) +#define raw_local_irq_disable() ((void) __raw_local_irq_save()) +#define raw_irqs_disabled() ((getipl() & PSR_PIL) != 0) + +static inline int raw_irqs_disabled_flags(unsigned long flags) +{ + return ((flags & PSR_PIL) != 0); +} + +#endif /* (__ASSEMBLY__) */ + +#endif /* !(_ASM_IRQFLAGS_H) */ diff --git a/arch/sparc/include/asm/irqflags_64.h b/arch/sparc/include/asm/irqflags_64.h new file mode 100644 index 00000000000..bb42e59162a --- /dev/null +++ b/arch/sparc/include/asm/irqflags_64.h @@ -0,0 +1,89 @@ +/* + * include/asm/irqflags.h + * + * IRQ flags handling + * + * This file gets included from lowlevel asm headers too, to provide + * wrapped versions of the local_irq_*() APIs, based on the + * raw_local_irq_*() functions from the lowlevel headers. + */ +#ifndef _ASM_IRQFLAGS_H +#define _ASM_IRQFLAGS_H + +#ifndef __ASSEMBLY__ + +static inline unsigned long __raw_local_save_flags(void) +{ + unsigned long flags; + + __asm__ __volatile__( + "rdpr %%pil, %0" + : "=r" (flags) + ); + + return flags; +} + +#define raw_local_save_flags(flags) \ + do { (flags) = __raw_local_save_flags(); } while (0) + +static inline void raw_local_irq_restore(unsigned long flags) +{ + __asm__ __volatile__( + "wrpr %0, %%pil" + : /* no output */ + : "r" (flags) + : "memory" + ); +} + +static inline void raw_local_irq_disable(void) +{ + __asm__ __volatile__( + "wrpr 15, %%pil" + : /* no outputs */ + : /* no inputs */ + : "memory" + ); +} + +static inline void raw_local_irq_enable(void) +{ + __asm__ __volatile__( + "wrpr 0, %%pil" + : /* no outputs */ + : /* no inputs */ + : "memory" + ); +} + +static inline int raw_irqs_disabled_flags(unsigned long flags) +{ + return (flags > 0); +} + +static inline int raw_irqs_disabled(void) +{ + unsigned long flags = __raw_local_save_flags(); + + return raw_irqs_disabled_flags(flags); +} + +/* + * For spinlocks, etc: + */ +static inline unsigned long __raw_local_irq_save(void) +{ + unsigned long flags = __raw_local_save_flags(); + + raw_local_irq_disable(); + + return flags; +} + +#define raw_local_irq_save(flags) \ + do { (flags) = __raw_local_irq_save(); } while (0) + +#endif /* (__ASSEMBLY__) */ + +#endif /* !(_ASM_IRQFLAGS_H) */ diff --git a/arch/sparc/include/asm/jsflash.h b/arch/sparc/include/asm/jsflash.h new file mode 100644 index 00000000000..3457f29bd73 --- /dev/null +++ b/arch/sparc/include/asm/jsflash.h @@ -0,0 +1,39 @@ +/* + * jsflash.h: OS Flash SIMM support for JavaStations. + * + * Copyright (C) 1999 Pete Zaitcev + */ + +#ifndef _SPARC_JSFLASH_H +#define _SPARC_JSFLASH_H + +#ifndef _SPARC_TYPES_H +#include <asm/types.h> +#endif + +/* + * Semantics of the offset is a full address. + * Hardcode it or get it from probe ioctl. + * + * We use full bus address, so that we would be + * automatically compatible with possible future systems. + */ + +#define JSFLASH_IDENT (('F'<<8)|54) +struct jsflash_ident_arg { + __u64 off; /* 0x20000000 is included */ + __u32 size; + char name[32]; /* With trailing zero */ +}; + +#define JSFLASH_ERASE (('F'<<8)|55) +/* Put 0 as argument, may be flags or sector number... */ + +#define JSFLASH_PROGRAM (('F'<<8)|56) +struct jsflash_program_arg { + __u64 data; /* char* for sparc and sparc64 */ + __u64 off; + __u32 size; +}; + +#endif /* _SPARC_JSFLASH_H */ diff --git a/arch/sparc/include/asm/kdebug.h b/arch/sparc/include/asm/kdebug.h new file mode 100644 index 00000000000..8d12581ca38 --- /dev/null +++ b/arch/sparc/include/asm/kdebug.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_KDEBUG_H +#define ___ASM_SPARC_KDEBUG_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/kdebug_64.h> +#else +#include <asm/kdebug_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/kdebug_32.h b/arch/sparc/include/asm/kdebug_32.h new file mode 100644 index 00000000000..f69fe7d84b3 --- /dev/null +++ b/arch/sparc/include/asm/kdebug_32.h @@ -0,0 +1,73 @@ +/* + * kdebug.h: Defines and definitions for debugging the Linux kernel + * under various kernel debuggers. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ +#ifndef _SPARC_KDEBUG_H +#define _SPARC_KDEBUG_H + +#include <asm/openprom.h> +#include <asm/vaddrs.h> + +/* Breakpoints are enter through trap table entry 126. So in sparc assembly + * if you want to drop into the debugger you do: + * + * t DEBUG_BP_TRAP + */ + +#define DEBUG_BP_TRAP 126 + +#ifndef __ASSEMBLY__ +/* The debug vector is passed in %o1 at boot time. It is a pointer to + * a structure in the debuggers address space. Here is its format. + */ + +typedef unsigned int (*debugger_funct)(void); + +struct kernel_debug { + /* First the entry point into the debugger. You jump here + * to give control over to the debugger. + */ + unsigned long kdebug_entry; + unsigned long kdebug_trapme; /* Figure out later... */ + /* The following is the number of pages that the debugger has + * taken from to total pool. + */ + unsigned long *kdebug_stolen_pages; + /* Ok, after you remap yourself and/or change the trap table + * from what you were left with at boot time you have to call + * this synchronization function so the debugger can check out + * what you have done. + */ + debugger_funct teach_debugger; +}; /* I think that is it... */ + +extern struct kernel_debug *linux_dbvec; + +/* Use this macro in C-code to enter the debugger. */ +static inline void sp_enter_debugger(void) +{ + __asm__ __volatile__("jmpl %0, %%o7\n\t" + "nop\n\t" : : + "r" (linux_dbvec) : "o7", "memory"); +} + +#define SP_ENTER_DEBUGGER do { \ + if((linux_dbvec!=0) && ((*(short *)linux_dbvec)!=-1)) \ + sp_enter_debugger(); \ + } while(0) + +enum die_val { + DIE_UNUSED, +}; + +#endif /* !(__ASSEMBLY__) */ + +/* Some nice offset defines for assembler code. */ +#define KDEBUG_ENTRY_OFF 0x0 +#define KDEBUG_DUNNO_OFF 0x4 +#define KDEBUG_DUNNO2_OFF 0x8 +#define KDEBUG_TEACH_OFF 0xc + +#endif /* !(_SPARC_KDEBUG_H) */ diff --git a/arch/sparc/include/asm/kdebug_64.h b/arch/sparc/include/asm/kdebug_64.h new file mode 100644 index 00000000000..f905b773235 --- /dev/null +++ b/arch/sparc/include/asm/kdebug_64.h @@ -0,0 +1,19 @@ +#ifndef _SPARC64_KDEBUG_H +#define _SPARC64_KDEBUG_H + +struct pt_regs; + +extern void bad_trap(struct pt_regs *, long); + +/* Grossly misnamed. */ +enum die_val { + DIE_OOPS = 1, + DIE_DEBUG, /* ta 0x70 */ + DIE_DEBUG_2, /* ta 0x71 */ + DIE_DIE, + DIE_TRAP, + DIE_TRAP_TL1, + DIE_CALL, +}; + +#endif diff --git a/arch/sparc/include/asm/kgdb.h b/arch/sparc/include/asm/kgdb.h new file mode 100644 index 00000000000..b6ef301d05b --- /dev/null +++ b/arch/sparc/include/asm/kgdb.h @@ -0,0 +1,38 @@ +#ifndef _SPARC_KGDB_H +#define _SPARC_KGDB_H + +#ifdef CONFIG_SPARC32 +#define BUFMAX 2048 +#else +#define BUFMAX 4096 +#endif + +enum regnames { + GDB_G0, GDB_G1, GDB_G2, GDB_G3, GDB_G4, GDB_G5, GDB_G6, GDB_G7, + GDB_O0, GDB_O1, GDB_O2, GDB_O3, GDB_O4, GDB_O5, GDB_SP, GDB_O7, + GDB_L0, GDB_L1, GDB_L2, GDB_L3, GDB_L4, GDB_L5, GDB_L6, GDB_L7, + GDB_I0, GDB_I1, GDB_I2, GDB_I3, GDB_I4, GDB_I5, GDB_FP, GDB_I7, + GDB_F0, + GDB_F31 = GDB_F0 + 31, +#ifdef CONFIG_SPARC32 + GDB_Y, GDB_PSR, GDB_WIM, GDB_TBR, GDB_PC, GDB_NPC, + GDB_FSR, GDB_CSR, +#else + GDB_F32 = GDB_F0 + 32, + GDB_F62 = GDB_F32 + 15, + GDB_PC, GDB_NPC, GDB_STATE, GDB_FSR, GDB_FPRS, GDB_Y, +#endif +}; + +#ifdef CONFIG_SPARC32 +#define NUMREGBYTES ((GDB_CSR + 1) * 4) +#else +#define NUMREGBYTES ((GDB_Y + 1) * 8) +#endif + +extern void arch_kgdb_breakpoint(void); + +#define BREAK_INSTR_SIZE 4 +#define CACHE_FLUSH_IS_SAFE 1 + +#endif /* _SPARC_KGDB_H */ diff --git a/arch/sparc/include/asm/kmap_types.h b/arch/sparc/include/asm/kmap_types.h new file mode 100644 index 00000000000..602f5e034f7 --- /dev/null +++ b/arch/sparc/include/asm/kmap_types.h @@ -0,0 +1,25 @@ +#ifndef _ASM_KMAP_TYPES_H +#define _ASM_KMAP_TYPES_H + +/* Dummy header just to define km_type. None of this + * is actually used on sparc. -DaveM + */ + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif diff --git a/arch/sparc/include/asm/kprobes.h b/arch/sparc/include/asm/kprobes.h new file mode 100644 index 00000000000..5879d71afda --- /dev/null +++ b/arch/sparc/include/asm/kprobes.h @@ -0,0 +1,49 @@ +#ifndef _SPARC64_KPROBES_H +#define _SPARC64_KPROBES_H + +#include <linux/types.h> +#include <linux/percpu.h> + +typedef u32 kprobe_opcode_t; + +#define BREAKPOINT_INSTRUCTION 0x91d02070 /* ta 0x70 */ +#define BREAKPOINT_INSTRUCTION_2 0x91d02071 /* ta 0x71 */ +#define MAX_INSN_SIZE 2 + +#define kretprobe_blacklist_size 0 + +#define arch_remove_kprobe(p) do {} while (0) + +#define flush_insn_slot(p) \ +do { flushi(&(p)->ainsn.insn[0]); \ + flushi(&(p)->ainsn.insn[1]); \ +} while (0) + +void kretprobe_trampoline(void); + +/* Architecture specific copy of original instruction*/ +struct arch_specific_insn { + /* copy of the original instruction */ + kprobe_opcode_t insn[MAX_INSN_SIZE]; +}; + +struct prev_kprobe { + struct kprobe *kp; + unsigned long status; + unsigned long orig_tnpc; + unsigned long orig_tstate_pil; +}; + +/* per-cpu kprobe control block */ +struct kprobe_ctlblk { + unsigned long kprobe_status; + unsigned long kprobe_orig_tnpc; + unsigned long kprobe_orig_tstate_pil; + struct pt_regs jprobe_saved_regs; + struct prev_kprobe prev_kprobe; +}; + +extern int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data); +extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr); +#endif /* _SPARC64_KPROBES_H */ diff --git a/arch/sparc/include/asm/ldc.h b/arch/sparc/include/asm/ldc.h new file mode 100644 index 00000000000..bdb524a7b81 --- /dev/null +++ b/arch/sparc/include/asm/ldc.h @@ -0,0 +1,138 @@ +#ifndef _SPARC64_LDC_H +#define _SPARC64_LDC_H + +#include <asm/hypervisor.h> + +extern int ldom_domaining_enabled; +extern void ldom_set_var(const char *var, const char *value); +extern void ldom_reboot(const char *boot_command); +extern void ldom_power_off(void); + +/* The event handler will be evoked when link state changes + * or data becomes available on the receive side. + * + * For non-RAW links, if the LDC_EVENT_RESET event arrives the + * driver should reset all of it's internal state and reinvoke + * ldc_connect() to try and bring the link up again. + * + * For RAW links, ldc_connect() is not used. Instead the driver + * just waits for the LDC_EVENT_UP event. + */ +struct ldc_channel_config { + void (*event)(void *arg, int event); + + u32 mtu; + unsigned int rx_irq; + unsigned int tx_irq; + u8 mode; +#define LDC_MODE_RAW 0x00 +#define LDC_MODE_UNRELIABLE 0x01 +#define LDC_MODE_RESERVED 0x02 +#define LDC_MODE_STREAM 0x03 + + u8 debug; +#define LDC_DEBUG_HS 0x01 +#define LDC_DEBUG_STATE 0x02 +#define LDC_DEBUG_RX 0x04 +#define LDC_DEBUG_TX 0x08 +#define LDC_DEBUG_DATA 0x10 +}; + +#define LDC_EVENT_RESET 0x01 +#define LDC_EVENT_UP 0x02 +#define LDC_EVENT_DATA_READY 0x04 + +#define LDC_STATE_INVALID 0x00 +#define LDC_STATE_INIT 0x01 +#define LDC_STATE_BOUND 0x02 +#define LDC_STATE_READY 0x03 +#define LDC_STATE_CONNECTED 0x04 + +struct ldc_channel; + +/* Allocate state for a channel. */ +extern struct ldc_channel *ldc_alloc(unsigned long id, + const struct ldc_channel_config *cfgp, + void *event_arg); + +/* Shut down and free state for a channel. */ +extern void ldc_free(struct ldc_channel *lp); + +/* Register TX and RX queues of the link with the hypervisor. */ +extern int ldc_bind(struct ldc_channel *lp, const char *name); + +/* For non-RAW protocols we need to complete a handshake before + * communication can proceed. ldc_connect() does that, if the + * handshake completes successfully, an LDC_EVENT_UP event will + * be sent up to the driver. + */ +extern int ldc_connect(struct ldc_channel *lp); +extern int ldc_disconnect(struct ldc_channel *lp); + +extern int ldc_state(struct ldc_channel *lp); + +/* Read and write operations. Only valid when the link is up. */ +extern int ldc_write(struct ldc_channel *lp, const void *buf, + unsigned int size); +extern int ldc_read(struct ldc_channel *lp, void *buf, unsigned int size); + +#define LDC_MAP_SHADOW 0x01 +#define LDC_MAP_DIRECT 0x02 +#define LDC_MAP_IO 0x04 +#define LDC_MAP_R 0x08 +#define LDC_MAP_W 0x10 +#define LDC_MAP_X 0x20 +#define LDC_MAP_RW (LDC_MAP_R | LDC_MAP_W) +#define LDC_MAP_RWX (LDC_MAP_R | LDC_MAP_W | LDC_MAP_X) +#define LDC_MAP_ALL 0x03f + +struct ldc_trans_cookie { + u64 cookie_addr; + u64 cookie_size; +}; + +struct scatterlist; +extern int ldc_map_sg(struct ldc_channel *lp, + struct scatterlist *sg, int num_sg, + struct ldc_trans_cookie *cookies, int ncookies, + unsigned int map_perm); + +extern int ldc_map_single(struct ldc_channel *lp, + void *buf, unsigned int len, + struct ldc_trans_cookie *cookies, int ncookies, + unsigned int map_perm); + +extern void ldc_unmap(struct ldc_channel *lp, struct ldc_trans_cookie *cookies, + int ncookies); + +extern int ldc_copy(struct ldc_channel *lp, int copy_dir, + void *buf, unsigned int len, unsigned long offset, + struct ldc_trans_cookie *cookies, int ncookies); + +static inline int ldc_get_dring_entry(struct ldc_channel *lp, + void *buf, unsigned int len, + unsigned long offset, + struct ldc_trans_cookie *cookies, + int ncookies) +{ + return ldc_copy(lp, LDC_COPY_IN, buf, len, offset, cookies, ncookies); +} + +static inline int ldc_put_dring_entry(struct ldc_channel *lp, + void *buf, unsigned int len, + unsigned long offset, + struct ldc_trans_cookie *cookies, + int ncookies) +{ + return ldc_copy(lp, LDC_COPY_OUT, buf, len, offset, cookies, ncookies); +} + +extern void *ldc_alloc_exp_dring(struct ldc_channel *lp, unsigned int len, + struct ldc_trans_cookie *cookies, + int *ncookies, unsigned int map_perm); + +extern void ldc_free_exp_dring(struct ldc_channel *lp, void *buf, + unsigned int len, + struct ldc_trans_cookie *cookies, int ncookies); + +#endif /* _SPARC64_LDC_H */ diff --git a/arch/sparc/include/asm/linkage.h b/arch/sparc/include/asm/linkage.h new file mode 100644 index 00000000000..291c2d01c44 --- /dev/null +++ b/arch/sparc/include/asm/linkage.h @@ -0,0 +1,6 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +/* Nothing to see here... */ + +#endif diff --git a/arch/sparc/include/asm/lmb.h b/arch/sparc/include/asm/lmb.h new file mode 100644 index 00000000000..6a352cbcf52 --- /dev/null +++ b/arch/sparc/include/asm/lmb.h @@ -0,0 +1,10 @@ +#ifndef _SPARC64_LMB_H +#define _SPARC64_LMB_H + +#include <asm/oplib.h> + +#define LMB_DBG(fmt...) prom_printf(fmt) + +#define LMB_REAL_LIMIT 0 + +#endif /* !(_SPARC64_LMB_H) */ diff --git a/arch/sparc/include/asm/local.h b/arch/sparc/include/asm/local.h new file mode 100644 index 00000000000..bc80815a435 --- /dev/null +++ b/arch/sparc/include/asm/local.h @@ -0,0 +1,6 @@ +#ifndef _SPARC_LOCAL_H +#define _SPARC_LOCAL_H + +#include <asm-generic/local.h> + +#endif diff --git a/arch/sparc/include/asm/lsu.h b/arch/sparc/include/asm/lsu.h new file mode 100644 index 00000000000..7190f8de90a --- /dev/null +++ b/arch/sparc/include/asm/lsu.h @@ -0,0 +1,19 @@ +#ifndef _SPARC64_LSU_H +#define _SPARC64_LSU_H + +#include <linux/const.h> + +/* LSU Control Register */ +#define LSU_CONTROL_PM _AC(0x000001fe00000000,UL) /* Phys-watchpoint byte mask*/ +#define LSU_CONTROL_VM _AC(0x00000001fe000000,UL) /* Virt-watchpoint byte mask*/ +#define LSU_CONTROL_PR _AC(0x0000000001000000,UL) /* Phys-rd watchpoint enable*/ +#define LSU_CONTROL_PW _AC(0x0000000000800000,UL) /* Phys-wr watchpoint enable*/ +#define LSU_CONTROL_VR _AC(0x0000000000400000,UL) /* Virt-rd watchpoint enable*/ +#define LSU_CONTROL_VW _AC(0x0000000000200000,UL) /* Virt-wr watchpoint enable*/ +#define LSU_CONTROL_FM _AC(0x00000000000ffff0,UL) /* Parity mask enables. */ +#define LSU_CONTROL_DM _AC(0x0000000000000008,UL) /* Data MMU enable. */ +#define LSU_CONTROL_IM _AC(0x0000000000000004,UL) /* Instruction MMU enable. */ +#define LSU_CONTROL_DC _AC(0x0000000000000002,UL) /* Data cache enable. */ +#define LSU_CONTROL_IC _AC(0x0000000000000001,UL) /* Instruction cache enable.*/ + +#endif /* !(_SPARC64_LSU_H) */ diff --git a/arch/sparc/include/asm/machines.h b/arch/sparc/include/asm/machines.h new file mode 100644 index 00000000000..c28c2f24879 --- /dev/null +++ b/arch/sparc/include/asm/machines.h @@ -0,0 +1,67 @@ +/* + * machines.h: Defines for taking apart the machine type value in the + * idprom and determining the kind of machine we are on. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ +#ifndef _SPARC_MACHINES_H +#define _SPARC_MACHINES_H + +struct Sun_Machine_Models { + char *name; + unsigned char id_machtype; +}; + +/* Current number of machines we know about that has an IDPROM + * machtype entry including one entry for the 0x80 OBP machines. + */ +#define NUM_SUN_MACHINES 15 + +/* The machine type in the idprom area looks like this: + * + * --------------- + * | ARCH | MACH | + * --------------- + * 7 4 3 0 + * + * The ARCH field determines the architecture line (sun4, sun4c, etc). + * The MACH field determines the machine make within that architecture. + */ + +#define SM_ARCH_MASK 0xf0 +#define SM_SUN4 0x20 +#define SM_SUN4C 0x50 +#define SM_SUN4M 0x70 +#define SM_SUN4M_OBP 0x80 + +#define SM_TYP_MASK 0x0f +/* Sun4 machines */ +#define SM_4_260 0x01 /* Sun 4/200 series */ +#define SM_4_110 0x02 /* Sun 4/100 series */ +#define SM_4_330 0x03 /* Sun 4/300 series */ +#define SM_4_470 0x04 /* Sun 4/400 series */ + +/* Sun4c machines Full Name - PROM NAME */ +#define SM_4C_SS1 0x01 /* Sun4c SparcStation 1 - Sun 4/60 */ +#define SM_4C_IPC 0x02 /* Sun4c SparcStation IPC - Sun 4/40 */ +#define SM_4C_SS1PLUS 0x03 /* Sun4c SparcStation 1+ - Sun 4/65 */ +#define SM_4C_SLC 0x04 /* Sun4c SparcStation SLC - Sun 4/20 */ +#define SM_4C_SS2 0x05 /* Sun4c SparcStation 2 - Sun 4/75 */ +#define SM_4C_ELC 0x06 /* Sun4c SparcStation ELC - Sun 4/25 */ +#define SM_4C_IPX 0x07 /* Sun4c SparcStation IPX - Sun 4/50 */ + +/* Sun4m machines, these predate the OpenBoot. These values only mean + * something if the value in the ARCH field is SM_SUN4M, if it is + * SM_SUN4M_OBP then you have the following situation: + * 1) You either have a sun4d, a sun4e, or a recently made sun4m. + * 2) You have to consult OpenBoot to determine which machine this is. + */ +#define SM_4M_SS60 0x01 /* Sun4m SparcSystem 600 */ +#define SM_4M_SS50 0x02 /* Sun4m SparcStation 10 */ +#define SM_4M_SS40 0x03 /* Sun4m SparcStation 5 */ + +/* Sun4d machines -- N/A */ +/* Sun4e machines -- N/A */ +/* Sun4u machines -- N/A */ + +#endif /* !(_SPARC_MACHINES_H) */ diff --git a/arch/sparc/include/asm/mbus.h b/arch/sparc/include/asm/mbus.h new file mode 100644 index 00000000000..69f07a022ee --- /dev/null +++ b/arch/sparc/include/asm/mbus.h @@ -0,0 +1,100 @@ +/* + * mbus.h: Various defines for MBUS modules. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_MBUS_H +#define _SPARC_MBUS_H + +#include <asm/ross.h> /* HyperSparc stuff */ +#include <asm/cypress.h> /* Cypress Chips */ +#include <asm/viking.h> /* Ugh, bug city... */ + +enum mbus_module { + HyperSparc = 0, + Cypress = 1, + Cypress_vE = 2, + Cypress_vD = 3, + Swift_ok = 4, + Swift_bad_c = 5, + Swift_lots_o_bugs = 6, + Tsunami = 7, + Viking_12 = 8, + Viking_2x = 9, + Viking_30 = 10, + Viking_35 = 11, + Viking_new = 12, + TurboSparc = 13, + SRMMU_INVAL_MOD = 14, +}; + +extern enum mbus_module srmmu_modtype; +extern unsigned int viking_rev, swift_rev, cypress_rev; + +/* HW Mbus module bugs we have to deal with */ +#define HWBUG_COPYBACK_BROKEN 0x00000001 +#define HWBUG_ASIFLUSH_BROKEN 0x00000002 +#define HWBUG_VACFLUSH_BITROT 0x00000004 +#define HWBUG_KERN_ACCBROKEN 0x00000008 +#define HWBUG_KERN_CBITBROKEN 0x00000010 +#define HWBUG_MODIFIED_BITROT 0x00000020 +#define HWBUG_PC_BADFAULT_ADDR 0x00000040 +#define HWBUG_SUPERSCALAR_BAD 0x00000080 +#define HWBUG_PACINIT_BITROT 0x00000100 + +/* First the module type values. To find out which you have, just load + * the mmu control register from ASI_M_MMUREG alternate address space and + * shift the value right 28 bits. + */ +/* IMPL field means the company which produced the chip. */ +#define MBUS_VIKING 0x4 /* bleech, Texas Instruments Module */ +#define MBUS_LSI 0x3 /* LSI Logics */ +#define MBUS_ROSS 0x1 /* Ross is nice */ +#define MBUS_FMI 0x0 /* Fujitsu Microelectronics/Swift */ + +/* Ross Module versions */ +#define ROSS_604_REV_CDE 0x0 /* revisions c, d, and e */ +#define ROSS_604_REV_F 0x1 /* revision f */ +#define ROSS_605 0xf /* revision a, a.1, and a.2 */ +#define ROSS_605_REV_B 0xe /* revision b */ + +/* TI Viking Module versions */ +#define VIKING_REV_12 0x1 /* Version 1.2 or SPARCclassic's CPU */ +#define VIKING_REV_2 0x2 /* Version 2.1, 2.2, 2.3, and 2.4 */ +#define VIKING_REV_30 0x3 /* Version 3.0 */ +#define VIKING_REV_35 0x4 /* Version 3.5 */ + +/* LSI Logics. */ +#define LSI_L64815 0x0 + +/* Fujitsu */ +#define FMI_AURORA 0x4 /* MB8690x, a Swift module... */ +#define FMI_TURBO 0x5 /* MB86907, a TurboSparc module... */ + +/* For multiprocessor support we need to be able to obtain the CPU id and + * the MBUS Module id. + */ + +/* The CPU ID is encoded in the trap base register, 20 bits to the left of + * bit zero, with 2 bits being significant. + */ +#define TBR_ID_SHIFT 20 + +static inline int get_cpuid(void) +{ + register int retval; + __asm__ __volatile__("rd %%tbr, %0\n\t" + "srl %0, %1, %0\n\t" : + "=r" (retval) : + "i" (TBR_ID_SHIFT)); + return (retval & 3); +} + +static inline int get_modid(void) +{ + return (get_cpuid() | 0x8); +} + + +#endif /* !(_SPARC_MBUS_H) */ diff --git a/arch/sparc/include/asm/mc146818rtc.h b/arch/sparc/include/asm/mc146818rtc.h new file mode 100644 index 00000000000..67ed9e3a023 --- /dev/null +++ b/arch/sparc/include/asm/mc146818rtc.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_MC146818RTC_H +#define ___ASM_SPARC_MC146818RTC_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/mc146818rtc_64.h> +#else +#include <asm/mc146818rtc_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/mc146818rtc_32.h b/arch/sparc/include/asm/mc146818rtc_32.h new file mode 100644 index 00000000000..fa7eac92658 --- /dev/null +++ b/arch/sparc/include/asm/mc146818rtc_32.h @@ -0,0 +1,29 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef __ASM_SPARC_MC146818RTC_H +#define __ASM_SPARC_MC146818RTC_H + +#include <asm/io.h> + +#ifndef RTC_PORT +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ +#endif + +/* + * The yet supported machines all access the RTC index register via + * an ISA port access but the way to access the date register differs ... + */ +#define CMOS_READ(addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +inb_p(RTC_PORT(1)); \ +}) +#define CMOS_WRITE(val, addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +outb_p((val),RTC_PORT(1)); \ +}) + +#define RTC_IRQ 8 + +#endif /* __ASM_SPARC_MC146818RTC_H */ diff --git a/arch/sparc/include/asm/mc146818rtc_64.h b/arch/sparc/include/asm/mc146818rtc_64.h new file mode 100644 index 00000000000..e9c0fcc25c6 --- /dev/null +++ b/arch/sparc/include/asm/mc146818rtc_64.h @@ -0,0 +1,34 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef __ASM_SPARC64_MC146818RTC_H +#define __ASM_SPARC64_MC146818RTC_H + +#include <asm/io.h> + +#ifndef RTC_PORT +#ifdef CONFIG_PCI +extern unsigned long ds1287_regs; +#else +#define ds1287_regs (0UL) +#endif +#define RTC_PORT(x) (ds1287_regs + (x)) +#define RTC_ALWAYS_BCD 0 +#endif + +/* + * The yet supported machines all access the RTC index register via + * an ISA port access but the way to access the date register differs ... + */ +#define CMOS_READ(addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +inb_p(RTC_PORT(1)); \ +}) +#define CMOS_WRITE(val, addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +outb_p((val),RTC_PORT(1)); \ +}) + +#define RTC_IRQ 8 + +#endif /* __ASM_SPARC64_MC146818RTC_H */ diff --git a/arch/sparc/include/asm/mdesc.h b/arch/sparc/include/asm/mdesc.h new file mode 100644 index 00000000000..1acc7272e53 --- /dev/null +++ b/arch/sparc/include/asm/mdesc.h @@ -0,0 +1,78 @@ +#ifndef _SPARC64_MDESC_H +#define _SPARC64_MDESC_H + +#include <linux/types.h> +#include <linux/cpumask.h> +#include <asm/prom.h> + +struct mdesc_handle; + +/* Machine description operations are to be surrounded by grab and + * release calls. The mdesc_handle returned from the grab is + * the first argument to all of the operational calls that work + * on mdescs. + */ +extern struct mdesc_handle *mdesc_grab(void); +extern void mdesc_release(struct mdesc_handle *); + +#define MDESC_NODE_NULL (~(u64)0) + +extern u64 mdesc_node_by_name(struct mdesc_handle *handle, + u64 from_node, const char *name); +#define mdesc_for_each_node_by_name(__hdl, __node, __name) \ + for (__node = mdesc_node_by_name(__hdl, MDESC_NODE_NULL, __name); \ + (__node) != MDESC_NODE_NULL; \ + __node = mdesc_node_by_name(__hdl, __node, __name)) + +/* Access to property values returned from mdesc_get_property() are + * only valid inside of a mdesc_grab()/mdesc_release() sequence. + * Once mdesc_release() is called, the memory backed up by these + * pointers may reference freed up memory. + * + * Therefore callers must make copies of any property values + * they need. + * + * These same rules apply to mdesc_node_name(). + */ +extern const void *mdesc_get_property(struct mdesc_handle *handle, + u64 node, const char *name, int *lenp); +extern const char *mdesc_node_name(struct mdesc_handle *hp, u64 node); + +/* MD arc iteration, the standard sequence is: + * + * unsigned long arc; + * mdesc_for_each_arc(arc, handle, node, MDESC_ARC_TYPE_{FWD,BACK}) { + * unsigned long target = mdesc_arc_target(handle, arc); + * ... + * } + */ + +#define MDESC_ARC_TYPE_FWD "fwd" +#define MDESC_ARC_TYPE_BACK "back" + +extern u64 mdesc_next_arc(struct mdesc_handle *handle, u64 from, + const char *arc_type); +#define mdesc_for_each_arc(__arc, __hdl, __node, __type) \ + for (__arc = mdesc_next_arc(__hdl, __node, __type); \ + (__arc) != MDESC_NODE_NULL; \ + __arc = mdesc_next_arc(__hdl, __arc, __type)) + +extern u64 mdesc_arc_target(struct mdesc_handle *hp, u64 arc); + +extern void mdesc_update(void); + +struct mdesc_notifier_client { + void (*add)(struct mdesc_handle *handle, u64 node); + void (*remove)(struct mdesc_handle *handle, u64 node); + + const char *node_name; + struct mdesc_notifier_client *next; +}; + +extern void mdesc_register_notifier(struct mdesc_notifier_client *client); + +extern void mdesc_fill_in_cpu_data(cpumask_t mask); + +extern void sun4v_mdesc_init(void); + +#endif diff --git a/arch/sparc/include/asm/memreg.h b/arch/sparc/include/asm/memreg.h new file mode 100644 index 00000000000..845ad2b3918 --- /dev/null +++ b/arch/sparc/include/asm/memreg.h @@ -0,0 +1,51 @@ +#ifndef _SPARC_MEMREG_H +#define _SPARC_MEMREG_H +/* memreg.h: Definitions of the values found in the synchronous + * and asynchronous memory error registers when a fault + * occurs on the sun4c. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +/* First the synchronous error codes, these are usually just + * normal page faults. + */ + +#define SUN4C_SYNC_WDRESET 0x0001 /* watchdog reset */ +#define SUN4C_SYNC_SIZE 0x0002 /* bad access size? whuz this? */ +#define SUN4C_SYNC_PARITY 0x0008 /* bad ram chips caused a parity error */ +#define SUN4C_SYNC_SBUS 0x0010 /* the SBUS had some problems... */ +#define SUN4C_SYNC_NOMEM 0x0020 /* translation to non-existent ram */ +#define SUN4C_SYNC_PROT 0x0040 /* access violated pte protections */ +#define SUN4C_SYNC_NPRESENT 0x0080 /* pte said that page was not present */ +#define SUN4C_SYNC_BADWRITE 0x8000 /* while writing something went bogus */ + +#define SUN4C_SYNC_BOLIXED \ + (SUN4C_SYNC_WDRESET | SUN4C_SYNC_SIZE | SUN4C_SYNC_SBUS | \ + SUN4C_SYNC_NOMEM | SUN4C_SYNC_PARITY) + +/* Now the asynchronous error codes, these are almost always produced + * by the cache writing things back to memory and getting a bad translation. + * Bad DVMA transactions can cause these faults too. + */ + +#define SUN4C_ASYNC_BADDVMA 0x0010 /* error during DVMA access */ +#define SUN4C_ASYNC_NOMEM 0x0020 /* write back pointed to bad phys addr */ +#define SUN4C_ASYNC_BADWB 0x0080 /* write back points to non-present page */ + +/* Memory parity error register with associated bit constants. */ +#ifndef __ASSEMBLY__ +extern __volatile__ unsigned long __iomem *sun4c_memerr_reg; +#endif + +#define SUN4C_MPE_ERROR 0x80 /* Parity error detected. (ro) */ +#define SUN4C_MPE_MULTI 0x40 /* Multiple parity errors detected. (ro) */ +#define SUN4C_MPE_TEST 0x20 /* Write inverse parity. (rw) */ +#define SUN4C_MPE_CHECK 0x10 /* Enable parity checking. (rw) */ +#define SUN4C_MPE_ERR00 0x08 /* Parity error in bits 0-7. (ro) */ +#define SUN4C_MPE_ERR08 0x04 /* Parity error in bits 8-15. (ro) */ +#define SUN4C_MPE_ERR16 0x02 /* Parity error in bits 16-23. (ro) */ +#define SUN4C_MPE_ERR24 0x01 /* Parity error in bits 24-31. (ro) */ +#define SUN4C_MPE_ERRS 0x0F /* Bit mask for the error bits. (ro) */ + +#endif /* !(_SPARC_MEMREG_H) */ diff --git a/arch/sparc/include/asm/mman.h b/arch/sparc/include/asm/mman.h new file mode 100644 index 00000000000..fdfbbf0a473 --- /dev/null +++ b/arch/sparc/include/asm/mman.h @@ -0,0 +1,31 @@ +#ifndef __SPARC_MMAN_H__ +#define __SPARC_MMAN_H__ + +#include <asm-generic/mman.h> + +/* SunOS'ified... */ + +#define MAP_RENAME MAP_ANONYMOUS /* In SunOS terminology */ +#define MAP_NORESERVE 0x40 /* don't reserve swap pages */ +#define MAP_INHERIT 0x80 /* SunOS doesn't do this, but... */ +#define MAP_LOCKED 0x100 /* lock the mapping */ +#define _MAP_NEW 0x80000000 /* Binary compatibility is fun... */ + +#define MAP_GROWSDOWN 0x0200 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ + +#define MCL_CURRENT 0x2000 /* lock all currently mapped pages */ +#define MCL_FUTURE 0x4000 /* lock all additions to address space */ + +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ +#define arch_mmap_check(addr,len,flags) sparc_mmap_check(addr,len) +int sparc_mmap_check(unsigned long addr, unsigned long len); +#endif +#endif + +#endif /* __SPARC_MMAN_H__ */ diff --git a/arch/sparc/include/asm/mmu.h b/arch/sparc/include/asm/mmu.h new file mode 100644 index 00000000000..88fa313887d --- /dev/null +++ b/arch/sparc/include/asm/mmu.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_MMU_H +#define ___ASM_SPARC_MMU_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/mmu_64.h> +#else +#include <asm/mmu_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/mmu_32.h b/arch/sparc/include/asm/mmu_32.h new file mode 100644 index 00000000000..ccd36d26615 --- /dev/null +++ b/arch/sparc/include/asm/mmu_32.h @@ -0,0 +1,7 @@ +#ifndef __MMU_H +#define __MMU_H + +/* Default "unsigned long" context */ +typedef unsigned long mm_context_t; + +#endif diff --git a/arch/sparc/include/asm/mmu_64.h b/arch/sparc/include/asm/mmu_64.h new file mode 100644 index 00000000000..9067dc50053 --- /dev/null +++ b/arch/sparc/include/asm/mmu_64.h @@ -0,0 +1,123 @@ +#ifndef __MMU_H +#define __MMU_H + +#include <linux/const.h> +#include <asm/page.h> +#include <asm/hypervisor.h> + +#define CTX_NR_BITS 13 + +#define TAG_CONTEXT_BITS ((_AC(1,UL) << CTX_NR_BITS) - _AC(1,UL)) + +/* UltraSPARC-III+ and later have a feature whereby you can + * select what page size the various Data-TLB instances in the + * chip. In order to gracefully support this, we put the version + * field in a spot outside of the areas of the context register + * where this parameter is specified. + */ +#define CTX_VERSION_SHIFT 22 +#define CTX_VERSION_MASK ((~0UL) << CTX_VERSION_SHIFT) + +#define CTX_PGSZ_8KB _AC(0x0,UL) +#define CTX_PGSZ_64KB _AC(0x1,UL) +#define CTX_PGSZ_512KB _AC(0x2,UL) +#define CTX_PGSZ_4MB _AC(0x3,UL) +#define CTX_PGSZ_BITS _AC(0x7,UL) +#define CTX_PGSZ0_NUC_SHIFT 61 +#define CTX_PGSZ1_NUC_SHIFT 58 +#define CTX_PGSZ0_SHIFT 16 +#define CTX_PGSZ1_SHIFT 19 +#define CTX_PGSZ_MASK ((CTX_PGSZ_BITS << CTX_PGSZ0_SHIFT) | \ + (CTX_PGSZ_BITS << CTX_PGSZ1_SHIFT)) + +#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB) +#define CTX_PGSZ_BASE CTX_PGSZ_8KB +#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB) +#define CTX_PGSZ_BASE CTX_PGSZ_64KB +#else +#error No page size specified in kernel configuration +#endif + +#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) +#define CTX_PGSZ_HUGE CTX_PGSZ_4MB +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K) +#define CTX_PGSZ_HUGE CTX_PGSZ_512KB +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +#define CTX_PGSZ_HUGE CTX_PGSZ_64KB +#endif + +#define CTX_PGSZ_KERN CTX_PGSZ_4MB + +/* Thus, when running on UltraSPARC-III+ and later, we use the following + * PRIMARY_CONTEXT register values for the kernel context. + */ +#define CTX_CHEETAH_PLUS_NUC \ + ((CTX_PGSZ_KERN << CTX_PGSZ0_NUC_SHIFT) | \ + (CTX_PGSZ_BASE << CTX_PGSZ1_NUC_SHIFT)) + +#define CTX_CHEETAH_PLUS_CTX0 \ + ((CTX_PGSZ_KERN << CTX_PGSZ0_SHIFT) | \ + (CTX_PGSZ_BASE << CTX_PGSZ1_SHIFT)) + +/* If you want "the TLB context number" use CTX_NR_MASK. If you + * want "the bits I program into the context registers" use + * CTX_HW_MASK. + */ +#define CTX_NR_MASK TAG_CONTEXT_BITS +#define CTX_HW_MASK (CTX_NR_MASK | CTX_PGSZ_MASK) + +#define CTX_FIRST_VERSION ((_AC(1,UL) << CTX_VERSION_SHIFT) + _AC(1,UL)) +#define CTX_VALID(__ctx) \ + (!(((__ctx.sparc64_ctx_val) ^ tlb_context_cache) & CTX_VERSION_MASK)) +#define CTX_HWBITS(__ctx) ((__ctx.sparc64_ctx_val) & CTX_HW_MASK) +#define CTX_NRBITS(__ctx) ((__ctx.sparc64_ctx_val) & CTX_NR_MASK) + +#ifndef __ASSEMBLY__ + +#define TSB_ENTRY_ALIGNMENT 16 + +struct tsb { + unsigned long tag; + unsigned long pte; +} __attribute__((aligned(TSB_ENTRY_ALIGNMENT))); + +extern void __tsb_insert(unsigned long ent, unsigned long tag, unsigned long pte); +extern void tsb_flush(unsigned long ent, unsigned long tag); +extern void tsb_init(struct tsb *tsb, unsigned long size); + +struct tsb_config { + struct tsb *tsb; + unsigned long tsb_rss_limit; + unsigned long tsb_nentries; + unsigned long tsb_reg_val; + unsigned long tsb_map_vaddr; + unsigned long tsb_map_pte; +}; + +#define MM_TSB_BASE 0 + +#ifdef CONFIG_HUGETLB_PAGE +#define MM_TSB_HUGE 1 +#define MM_NUM_TSBS 2 +#else +#define MM_NUM_TSBS 1 +#endif + +typedef struct { + spinlock_t lock; + unsigned long sparc64_ctx_val; + unsigned long huge_pte_count; + struct tsb_config tsb_block[MM_NUM_TSBS]; + struct hv_tsb_descr tsb_descr[MM_NUM_TSBS]; +} mm_context_t; + +#endif /* !__ASSEMBLY__ */ + +#define TSB_CONFIG_TSB 0x00 +#define TSB_CONFIG_RSS_LIMIT 0x08 +#define TSB_CONFIG_NENTRIES 0x10 +#define TSB_CONFIG_REG_VAL 0x18 +#define TSB_CONFIG_MAP_VADDR 0x20 +#define TSB_CONFIG_MAP_PTE 0x28 + +#endif /* __MMU_H */ diff --git a/arch/sparc/include/asm/mmu_context.h b/arch/sparc/include/asm/mmu_context.h new file mode 100644 index 00000000000..5531346c64f --- /dev/null +++ b/arch/sparc/include/asm/mmu_context.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_MMU_CONTEXT_H +#define ___ASM_SPARC_MMU_CONTEXT_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/mmu_context_64.h> +#else +#include <asm/mmu_context_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/mmu_context_32.h b/arch/sparc/include/asm/mmu_context_32.h new file mode 100644 index 00000000000..671a997b9e6 --- /dev/null +++ b/arch/sparc/include/asm/mmu_context_32.h @@ -0,0 +1,42 @@ +#ifndef __SPARC_MMU_CONTEXT_H +#define __SPARC_MMU_CONTEXT_H + +#include <asm/btfixup.h> + +#ifndef __ASSEMBLY__ + +#include <asm-generic/mm_hooks.h> + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +/* + * Initialize a new mmu context. This is invoked when a new + * address space instance (unique or shared) is instantiated. + */ +#define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0) + +/* + * Destroy a dead context. This occurs when mmput drops the + * mm_users count to zero, the mmaps have been released, and + * all the page tables have been flushed. Our job is to destroy + * any remaining processor-specific state. + */ +BTFIXUPDEF_CALL(void, destroy_context, struct mm_struct *) + +#define destroy_context(mm) BTFIXUP_CALL(destroy_context)(mm) + +/* Switch the current MM context. */ +BTFIXUPDEF_CALL(void, switch_mm, struct mm_struct *, struct mm_struct *, struct task_struct *) + +#define switch_mm(old_mm, mm, tsk) BTFIXUP_CALL(switch_mm)(old_mm, mm, tsk) + +#define deactivate_mm(tsk,mm) do { } while (0) + +/* Activate a new MM instance for the current task. */ +#define activate_mm(active_mm, mm) switch_mm((active_mm), (mm), NULL) + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(__SPARC_MMU_CONTEXT_H) */ diff --git a/arch/sparc/include/asm/mmu_context_64.h b/arch/sparc/include/asm/mmu_context_64.h new file mode 100644 index 00000000000..5693ab48260 --- /dev/null +++ b/arch/sparc/include/asm/mmu_context_64.h @@ -0,0 +1,155 @@ +#ifndef __SPARC64_MMU_CONTEXT_H +#define __SPARC64_MMU_CONTEXT_H + +/* Derived heavily from Linus's Alpha/AXP ASN code... */ + +#ifndef __ASSEMBLY__ + +#include <linux/spinlock.h> +#include <asm/system.h> +#include <asm/spitfire.h> +#include <asm-generic/mm_hooks.h> + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +extern spinlock_t ctx_alloc_lock; +extern unsigned long tlb_context_cache; +extern unsigned long mmu_context_bmap[]; + +extern void get_new_mmu_context(struct mm_struct *mm); +#ifdef CONFIG_SMP +extern void smp_new_mmu_context_version(void); +#else +#define smp_new_mmu_context_version() do { } while (0) +#endif + +extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); +extern void destroy_context(struct mm_struct *mm); + +extern void __tsb_context_switch(unsigned long pgd_pa, + struct tsb_config *tsb_base, + struct tsb_config *tsb_huge, + unsigned long tsb_descr_pa); + +static inline void tsb_context_switch(struct mm_struct *mm) +{ + __tsb_context_switch(__pa(mm->pgd), + &mm->context.tsb_block[0], +#ifdef CONFIG_HUGETLB_PAGE + (mm->context.tsb_block[1].tsb ? + &mm->context.tsb_block[1] : + NULL) +#else + NULL +#endif + , __pa(&mm->context.tsb_descr[0])); +} + +extern void tsb_grow(struct mm_struct *mm, unsigned long tsb_index, unsigned long mm_rss); +#ifdef CONFIG_SMP +extern void smp_tsb_sync(struct mm_struct *mm); +#else +#define smp_tsb_sync(__mm) do { } while (0) +#endif + +/* Set MMU context in the actual hardware. */ +#define load_secondary_context(__mm) \ + __asm__ __volatile__( \ + "\n661: stxa %0, [%1] %2\n" \ + " .section .sun4v_1insn_patch, \"ax\"\n" \ + " .word 661b\n" \ + " stxa %0, [%1] %3\n" \ + " .previous\n" \ + " flush %%g6\n" \ + : /* No outputs */ \ + : "r" (CTX_HWBITS((__mm)->context)), \ + "r" (SECONDARY_CONTEXT), "i" (ASI_DMMU), "i" (ASI_MMU)) + +extern void __flush_tlb_mm(unsigned long, unsigned long); + +/* Switch the current MM context. Interrupts are disabled. */ +static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, struct task_struct *tsk) +{ + unsigned long ctx_valid, flags; + int cpu; + + if (unlikely(mm == &init_mm)) + return; + + spin_lock_irqsave(&mm->context.lock, flags); + ctx_valid = CTX_VALID(mm->context); + if (!ctx_valid) + get_new_mmu_context(mm); + + /* We have to be extremely careful here or else we will miss + * a TSB grow if we switch back and forth between a kernel + * thread and an address space which has it's TSB size increased + * on another processor. + * + * It is possible to play some games in order to optimize the + * switch, but the safest thing to do is to unconditionally + * perform the secondary context load and the TSB context switch. + * + * For reference the bad case is, for address space "A": + * + * CPU 0 CPU 1 + * run address space A + * set cpu0's bits in cpu_vm_mask + * switch to kernel thread, borrow + * address space A via entry_lazy_tlb + * run address space A + * set cpu1's bit in cpu_vm_mask + * flush_tlb_pending() + * reset cpu_vm_mask to just cpu1 + * TSB grow + * run address space A + * context was valid, so skip + * TSB context switch + * + * At that point cpu0 continues to use a stale TSB, the one from + * before the TSB grow performed on cpu1. cpu1 did not cross-call + * cpu0 to update it's TSB because at that point the cpu_vm_mask + * only had cpu1 set in it. + */ + load_secondary_context(mm); + tsb_context_switch(mm); + + /* Any time a processor runs a context on an address space + * for the first time, we must flush that context out of the + * local TLB. + */ + cpu = smp_processor_id(); + if (!ctx_valid || !cpu_isset(cpu, mm->cpu_vm_mask)) { + cpu_set(cpu, mm->cpu_vm_mask); + __flush_tlb_mm(CTX_HWBITS(mm->context), + SECONDARY_CONTEXT); + } + spin_unlock_irqrestore(&mm->context.lock, flags); +} + +#define deactivate_mm(tsk,mm) do { } while (0) + +/* Activate a new MM instance for the current task. */ +static inline void activate_mm(struct mm_struct *active_mm, struct mm_struct *mm) +{ + unsigned long flags; + int cpu; + + spin_lock_irqsave(&mm->context.lock, flags); + if (!CTX_VALID(mm->context)) + get_new_mmu_context(mm); + cpu = smp_processor_id(); + if (!cpu_isset(cpu, mm->cpu_vm_mask)) + cpu_set(cpu, mm->cpu_vm_mask); + + load_secondary_context(mm); + __flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT); + tsb_context_switch(mm); + spin_unlock_irqrestore(&mm->context.lock, flags); +} + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(__SPARC64_MMU_CONTEXT_H) */ diff --git a/arch/sparc/include/asm/mmzone.h b/arch/sparc/include/asm/mmzone.h new file mode 100644 index 00000000000..ebf5986c12e --- /dev/null +++ b/arch/sparc/include/asm/mmzone.h @@ -0,0 +1,17 @@ +#ifndef _SPARC64_MMZONE_H +#define _SPARC64_MMZONE_H + +#ifdef CONFIG_NEED_MULTIPLE_NODES + +extern struct pglist_data *node_data[]; + +#define NODE_DATA(nid) (node_data[nid]) +#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) +#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn) + +extern int numa_cpu_lookup_table[]; +extern cpumask_t numa_cpumask_lookup_table[]; + +#endif /* CONFIG_NEED_MULTIPLE_NODES */ + +#endif /* _SPARC64_MMZONE_H */ diff --git a/arch/sparc/include/asm/module.h b/arch/sparc/include/asm/module.h new file mode 100644 index 00000000000..e82cf9a3e60 --- /dev/null +++ b/arch/sparc/include/asm/module.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_MODULE_H +#define ___ASM_SPARC_MODULE_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/module_64.h> +#else +#include <asm/module_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/module_32.h b/arch/sparc/include/asm/module_32.h new file mode 100644 index 00000000000..cbd9e67b0c0 --- /dev/null +++ b/arch/sparc/include/asm/module_32.h @@ -0,0 +1,7 @@ +#ifndef _ASM_SPARC_MODULE_H +#define _ASM_SPARC_MODULE_H +struct mod_arch_specific { }; +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr +#endif /* _ASM_SPARC_MODULE_H */ diff --git a/arch/sparc/include/asm/module_64.h b/arch/sparc/include/asm/module_64.h new file mode 100644 index 00000000000..3d77ba46578 --- /dev/null +++ b/arch/sparc/include/asm/module_64.h @@ -0,0 +1,7 @@ +#ifndef _ASM_SPARC64_MODULE_H +#define _ASM_SPARC64_MODULE_H +struct mod_arch_specific { }; +#define Elf_Shdr Elf64_Shdr +#define Elf_Sym Elf64_Sym +#define Elf_Ehdr Elf64_Ehdr +#endif /* _ASM_SPARC64_MODULE_H */ diff --git a/arch/sparc/include/asm/mostek.h b/arch/sparc/include/asm/mostek.h new file mode 100644 index 00000000000..433be3e0a69 --- /dev/null +++ b/arch/sparc/include/asm/mostek.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_MOSTEK_H +#define ___ASM_SPARC_MOSTEK_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/mostek_64.h> +#else +#include <asm/mostek_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/mostek_32.h b/arch/sparc/include/asm/mostek_32.h new file mode 100644 index 00000000000..a99590c4c50 --- /dev/null +++ b/arch/sparc/include/asm/mostek_32.h @@ -0,0 +1,171 @@ +/* + * mostek.h: Describes the various Mostek time of day clock registers. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) + * Added intersil code 05/25/98 Chris Davis (cdavis@cois.on.ca) + */ + +#ifndef _SPARC_MOSTEK_H +#define _SPARC_MOSTEK_H + +#include <asm/idprom.h> +#include <asm/io.h> + +/* M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ) + * + * Data + * Address Function + * Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0 + * 7ff - - - - - - - - Year 00-99 + * 7fe 0 0 0 - - - - - Month 01-12 + * 7fd 0 0 - - - - - - Date 01-31 + * 7fc 0 FT 0 0 0 - - - Day 01-07 + * 7fb KS 0 - - - - - - Hours 00-23 + * 7fa 0 - - - - - - - Minutes 00-59 + * 7f9 ST - - - - - - - Seconds 00-59 + * 7f8 W R S - - - - - Control + * + * * ST is STOP BIT + * * W is WRITE BIT + * * R is READ BIT + * * S is SIGN BIT + * * FT is FREQ TEST BIT + * * KS is KICK START BIT + */ + +/* The Mostek 48t02 real time clock and NVRAM chip. The registers + * other than the control register are in binary coded decimal. Some + * control bits also live outside the control register. + */ +#define mostek_read(_addr) readb(_addr) +#define mostek_write(_addr,_val) writeb(_val, _addr) +#define MOSTEK_EEPROM 0x0000UL +#define MOSTEK_IDPROM 0x07d8UL +#define MOSTEK_CREG 0x07f8UL +#define MOSTEK_SEC 0x07f9UL +#define MOSTEK_MIN 0x07faUL +#define MOSTEK_HOUR 0x07fbUL +#define MOSTEK_DOW 0x07fcUL +#define MOSTEK_DOM 0x07fdUL +#define MOSTEK_MONTH 0x07feUL +#define MOSTEK_YEAR 0x07ffUL + +struct mostek48t02 { + volatile char eeprom[2008]; /* This is the eeprom, don't touch! */ + struct idprom idprom; /* The idprom lives here. */ + volatile unsigned char creg; /* Control register */ + volatile unsigned char sec; /* Seconds (0-59) */ + volatile unsigned char min; /* Minutes (0-59) */ + volatile unsigned char hour; /* Hour (0-23) */ + volatile unsigned char dow; /* Day of the week (1-7) */ + volatile unsigned char dom; /* Day of the month (1-31) */ + volatile unsigned char month; /* Month of year (1-12) */ + volatile unsigned char year; /* Year (0-99) */ +}; + +extern spinlock_t mostek_lock; +extern void __iomem *mstk48t02_regs; + +/* Control register values. */ +#define MSTK_CREG_WRITE 0x80 /* Must set this before placing values. */ +#define MSTK_CREG_READ 0x40 /* Stop updates to allow a clean read. */ +#define MSTK_CREG_SIGN 0x20 /* Slow/speed clock in calibration mode. */ + +/* Control bits that live in the other registers. */ +#define MSTK_STOP 0x80 /* Stop the clock oscillator. (sec) */ +#define MSTK_KICK_START 0x80 /* Kick start the clock chip. (hour) */ +#define MSTK_FREQ_TEST 0x40 /* Frequency test mode. (day) */ + +#define MSTK_YEAR_ZERO 1968 /* If year reg has zero, it is 1968. */ +#define MSTK_CVT_YEAR(yr) ((yr) + MSTK_YEAR_ZERO) + +/* Masks that define how much space each value takes up. */ +#define MSTK_SEC_MASK 0x7f +#define MSTK_MIN_MASK 0x7f +#define MSTK_HOUR_MASK 0x3f +#define MSTK_DOW_MASK 0x07 +#define MSTK_DOM_MASK 0x3f +#define MSTK_MONTH_MASK 0x1f +#define MSTK_YEAR_MASK 0xffU + +/* Binary coded decimal conversion macros. */ +#define MSTK_REGVAL_TO_DECIMAL(x) (((x) & 0x0F) + 0x0A * ((x) >> 0x04)) +#define MSTK_DECIMAL_TO_REGVAL(x) ((((x) / 0x0A) << 0x04) + ((x) % 0x0A)) + +/* Generic register set and get macros for internal use. */ +#define MSTK_GET(regs,var,mask) (MSTK_REGVAL_TO_DECIMAL(((struct mostek48t02 *)regs)->var & MSTK_ ## mask ## _MASK)) +#define MSTK_SET(regs,var,value,mask) do { ((struct mostek48t02 *)regs)->var &= ~(MSTK_ ## mask ## _MASK); ((struct mostek48t02 *)regs)->var |= MSTK_DECIMAL_TO_REGVAL(value) & (MSTK_ ## mask ## _MASK); } while (0) + +/* Macros to make register access easier on our fingers. These give you + * the decimal value of the register requested if applicable. You pass + * the a pointer to a 'struct mostek48t02'. + */ +#define MSTK_REG_CREG(regs) (((struct mostek48t02 *)regs)->creg) +#define MSTK_REG_SEC(regs) MSTK_GET(regs,sec,SEC) +#define MSTK_REG_MIN(regs) MSTK_GET(regs,min,MIN) +#define MSTK_REG_HOUR(regs) MSTK_GET(regs,hour,HOUR) +#define MSTK_REG_DOW(regs) MSTK_GET(regs,dow,DOW) +#define MSTK_REG_DOM(regs) MSTK_GET(regs,dom,DOM) +#define MSTK_REG_MONTH(regs) MSTK_GET(regs,month,MONTH) +#define MSTK_REG_YEAR(regs) MSTK_GET(regs,year,YEAR) + +#define MSTK_SET_REG_SEC(regs,value) MSTK_SET(regs,sec,value,SEC) +#define MSTK_SET_REG_MIN(regs,value) MSTK_SET(regs,min,value,MIN) +#define MSTK_SET_REG_HOUR(regs,value) MSTK_SET(regs,hour,value,HOUR) +#define MSTK_SET_REG_DOW(regs,value) MSTK_SET(regs,dow,value,DOW) +#define MSTK_SET_REG_DOM(regs,value) MSTK_SET(regs,dom,value,DOM) +#define MSTK_SET_REG_MONTH(regs,value) MSTK_SET(regs,month,value,MONTH) +#define MSTK_SET_REG_YEAR(regs,value) MSTK_SET(regs,year,value,YEAR) + + +/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the + * same (basically) layout of the 48t02 chip except for the extra + * NVRAM on board (8 KB against the 48t02's 2 KB). + */ +struct mostek48t08 { + char offset[6*1024]; /* Magic things may be here, who knows? */ + struct mostek48t02 regs; /* Here is what we are interested in. */ +}; + +#ifdef CONFIG_SUN4 +enum sparc_clock_type { MSTK48T02, MSTK48T08, \ +INTERSIL, MSTK_INVALID }; +#else +enum sparc_clock_type { MSTK48T02, MSTK48T08, \ +MSTK_INVALID }; +#endif + +#ifdef CONFIG_SUN4 +/* intersil on a sun 4/260 code data from harris doc */ +struct intersil_dt { + volatile unsigned char int_csec; + volatile unsigned char int_hour; + volatile unsigned char int_min; + volatile unsigned char int_sec; + volatile unsigned char int_month; + volatile unsigned char int_day; + volatile unsigned char int_year; + volatile unsigned char int_dow; +}; + +struct intersil { + struct intersil_dt clk; + struct intersil_dt cmp; + volatile unsigned char int_intr_reg; + volatile unsigned char int_cmd_reg; +}; + +#define INTERSIL_STOP 0x0 +#define INTERSIL_START 0x8 +#define INTERSIL_INTR_DISABLE 0x0 +#define INTERSIL_INTR_ENABLE 0x10 +#define INTERSIL_32K 0x0 +#define INTERSIL_NORMAL 0x0 +#define INTERSIL_24H 0x4 +#define INTERSIL_INT_100HZ 0x2 + +/* end of intersil info */ +#endif + +#endif /* !(_SPARC_MOSTEK_H) */ diff --git a/arch/sparc/include/asm/mostek_64.h b/arch/sparc/include/asm/mostek_64.h new file mode 100644 index 00000000000..c5652de2ace --- /dev/null +++ b/arch/sparc/include/asm/mostek_64.h @@ -0,0 +1,143 @@ +/* mostek.h: Describes the various Mostek time of day clock registers. + * + * Copyright (C) 1995 David S. Miller (davem@davemloft.net) + * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) + */ + +#ifndef _SPARC64_MOSTEK_H +#define _SPARC64_MOSTEK_H + +#include <asm/idprom.h> + +/* M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ) + * + * Data + * Address Function + * Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0 + * 7ff - - - - - - - - Year 00-99 + * 7fe 0 0 0 - - - - - Month 01-12 + * 7fd 0 0 - - - - - - Date 01-31 + * 7fc 0 FT 0 0 0 - - - Day 01-07 + * 7fb KS 0 - - - - - - Hours 00-23 + * 7fa 0 - - - - - - - Minutes 00-59 + * 7f9 ST - - - - - - - Seconds 00-59 + * 7f8 W R S - - - - - Control + * + * * ST is STOP BIT + * * W is WRITE BIT + * * R is READ BIT + * * S is SIGN BIT + * * FT is FREQ TEST BIT + * * KS is KICK START BIT + */ + +/* The Mostek 48t02 real time clock and NVRAM chip. The registers + * other than the control register are in binary coded decimal. Some + * control bits also live outside the control register. + * + * We now deal with physical addresses for I/O to the chip. -DaveM + */ +static inline u8 mostek_read(void __iomem *addr) +{ + u8 ret; + + __asm__ __volatile__("lduba [%1] %2, %0" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + return ret; +} + +static inline void mostek_write(void __iomem *addr, u8 val) +{ + __asm__ __volatile__("stba %0, [%1] %2" + : /* no outputs */ + : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); +} + +#define MOSTEK_EEPROM 0x0000UL +#define MOSTEK_IDPROM 0x07d8UL +#define MOSTEK_CREG 0x07f8UL +#define MOSTEK_SEC 0x07f9UL +#define MOSTEK_MIN 0x07faUL +#define MOSTEK_HOUR 0x07fbUL +#define MOSTEK_DOW 0x07fcUL +#define MOSTEK_DOM 0x07fdUL +#define MOSTEK_MONTH 0x07feUL +#define MOSTEK_YEAR 0x07ffUL + +extern spinlock_t mostek_lock; +extern void __iomem *mstk48t02_regs; + +/* Control register values. */ +#define MSTK_CREG_WRITE 0x80 /* Must set this before placing values. */ +#define MSTK_CREG_READ 0x40 /* Stop updates to allow a clean read. */ +#define MSTK_CREG_SIGN 0x20 /* Slow/speed clock in calibration mode. */ + +/* Control bits that live in the other registers. */ +#define MSTK_STOP 0x80 /* Stop the clock oscillator. (sec) */ +#define MSTK_KICK_START 0x80 /* Kick start the clock chip. (hour) */ +#define MSTK_FREQ_TEST 0x40 /* Frequency test mode. (day) */ + +#define MSTK_YEAR_ZERO 1968 /* If year reg has zero, it is 1968. */ +#define MSTK_CVT_YEAR(yr) ((yr) + MSTK_YEAR_ZERO) + +/* Masks that define how much space each value takes up. */ +#define MSTK_SEC_MASK 0x7f +#define MSTK_MIN_MASK 0x7f +#define MSTK_HOUR_MASK 0x3f +#define MSTK_DOW_MASK 0x07 +#define MSTK_DOM_MASK 0x3f +#define MSTK_MONTH_MASK 0x1f +#define MSTK_YEAR_MASK 0xffU + +/* Binary coded decimal conversion macros. */ +#define MSTK_REGVAL_TO_DECIMAL(x) (((x) & 0x0F) + 0x0A * ((x) >> 0x04)) +#define MSTK_DECIMAL_TO_REGVAL(x) ((((x) / 0x0A) << 0x04) + ((x) % 0x0A)) + +/* Generic register set and get macros for internal use. */ +#define MSTK_GET(regs,name) \ + (MSTK_REGVAL_TO_DECIMAL(mostek_read(regs + MOSTEK_ ## name) & MSTK_ ## name ## _MASK)) +#define MSTK_SET(regs,name,value) \ +do { u8 __val = mostek_read(regs + MOSTEK_ ## name); \ + __val &= ~(MSTK_ ## name ## _MASK); \ + __val |= (MSTK_DECIMAL_TO_REGVAL(value) & \ + (MSTK_ ## name ## _MASK)); \ + mostek_write(regs + MOSTEK_ ## name, __val); \ +} while(0) + +/* Macros to make register access easier on our fingers. These give you + * the decimal value of the register requested if applicable. You pass + * the a pointer to a 'struct mostek48t02'. + */ +#define MSTK_REG_CREG(regs) (mostek_read((regs) + MOSTEK_CREG)) +#define MSTK_REG_SEC(regs) MSTK_GET(regs,SEC) +#define MSTK_REG_MIN(regs) MSTK_GET(regs,MIN) +#define MSTK_REG_HOUR(regs) MSTK_GET(regs,HOUR) +#define MSTK_REG_DOW(regs) MSTK_GET(regs,DOW) +#define MSTK_REG_DOM(regs) MSTK_GET(regs,DOM) +#define MSTK_REG_MONTH(regs) MSTK_GET(regs,MONTH) +#define MSTK_REG_YEAR(regs) MSTK_GET(regs,YEAR) + +#define MSTK_SET_REG_SEC(regs,value) MSTK_SET(regs,SEC,value) +#define MSTK_SET_REG_MIN(regs,value) MSTK_SET(regs,MIN,value) +#define MSTK_SET_REG_HOUR(regs,value) MSTK_SET(regs,HOUR,value) +#define MSTK_SET_REG_DOW(regs,value) MSTK_SET(regs,DOW,value) +#define MSTK_SET_REG_DOM(regs,value) MSTK_SET(regs,DOM,value) +#define MSTK_SET_REG_MONTH(regs,value) MSTK_SET(regs,MONTH,value) +#define MSTK_SET_REG_YEAR(regs,value) MSTK_SET(regs,YEAR,value) + + +/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the + * same (basically) layout of the 48t02 chip except for the extra + * NVRAM on board (8 KB against the 48t02's 2 KB). + */ +#define MOSTEK_48T08_OFFSET 0x0000UL /* Lower NVRAM portions */ +#define MOSTEK_48T08_48T02 0x1800UL /* Offset to 48T02 chip */ + +/* SUN5 systems usually have 48t59 model clock chipsets. But we keep the older + * clock chip definitions around just in case. + */ +#define MOSTEK_48T59_OFFSET 0x0000UL /* Lower NVRAM portions */ +#define MOSTEK_48T59_48T02 0x1800UL /* Offset to 48T02 chip */ + +#endif /* !(_SPARC64_MOSTEK_H) */ diff --git a/arch/sparc/include/asm/mpmbox.h b/arch/sparc/include/asm/mpmbox.h new file mode 100644 index 00000000000..f8423039b24 --- /dev/null +++ b/arch/sparc/include/asm/mpmbox.h @@ -0,0 +1,67 @@ +/* + * mpmbox.h: Interface and defines for the OpenProm mailbox + * facilities for MP machines under Linux. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_MPMBOX_H +#define _SPARC_MPMBOX_H + +/* The prom allocates, for each CPU on the machine an unsigned + * byte in physical ram. You probe the device tree prom nodes + * for these values. The purpose of this byte is to be able to + * pass messages from one cpu to another. + */ + +/* These are the main message types we have to look for in our + * Cpu mailboxes, based upon these values we decide what course + * of action to take. + */ + +/* The CPU is executing code in the kernel. */ +#define MAILBOX_ISRUNNING 0xf0 + +/* Another CPU called romvec->pv_exit(), you should call + * prom_stopcpu() when you see this in your mailbox. + */ +#define MAILBOX_EXIT 0xfb + +/* Another CPU called romvec->pv_enter(), you should call + * prom_cpuidle() when this is seen. + */ +#define MAILBOX_GOSPIN 0xfc + +/* Another CPU has hit a breakpoint either into kadb or the prom + * itself. Just like MAILBOX_GOSPIN, you should call prom_cpuidle() + * at this point. + */ +#define MAILBOX_BPT_SPIN 0xfd + +/* Oh geese, some other nitwit got a damn watchdog reset. The party's + * over so go call prom_stopcpu(). + */ +#define MAILBOX_WDOG_STOP 0xfe + +#ifndef __ASSEMBLY__ + +/* Handy macro's to determine a cpu's state. */ + +/* Is the cpu still in Power On Self Test? */ +#define MBOX_POST_P(letter) ((letter) >= 0x00 && (letter) <= 0x7f) + +/* Is the cpu at the 'ok' prompt of the PROM? */ +#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f) + +/* Is the cpu spinning in the PROM? */ +#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef) + +/* Sanity check... This is junk mail, throw it out. */ +#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa) + +/* Is the cpu actively running an application/kernel-code? */ +#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING) + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_SPARC_MPMBOX_H) */ diff --git a/arch/sparc/include/asm/msgbuf.h b/arch/sparc/include/asm/msgbuf.h new file mode 100644 index 00000000000..efc7cbe9788 --- /dev/null +++ b/arch/sparc/include/asm/msgbuf.h @@ -0,0 +1,38 @@ +#ifndef _SPARC_MSGBUF_H +#define _SPARC_MSGBUF_H + +/* + * The msqid64_ds structure for sparc64 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +#if defined(__sparc__) && defined(__arch64__) +# define PADDING(x) +#else +# define PADDING(x) unsigned int x; +#endif + + +struct msqid64_ds { + struct ipc64_perm msg_perm; + PADDING(__pad1) + __kernel_time_t msg_stime; /* last msgsnd time */ + PADDING(__pad2) + __kernel_time_t msg_rtime; /* last msgrcv time */ + PADDING(__pad3) + __kernel_time_t msg_ctime; /* last change time */ + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused1; + unsigned long __unused2; +}; +#undef PADDING +#endif /* _SPARC_MSGBUF_H */ diff --git a/arch/sparc/include/asm/msi.h b/arch/sparc/include/asm/msi.h new file mode 100644 index 00000000000..724ca566705 --- /dev/null +++ b/arch/sparc/include/asm/msi.h @@ -0,0 +1,31 @@ +/* + * msi.h: Defines specific to the MBus - Sbus - Interface. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be) + */ + +#ifndef _SPARC_MSI_H +#define _SPARC_MSI_H + +/* + * Locations of MSI Registers. + */ +#define MSI_MBUS_ARBEN 0xe0001008 /* MBus Arbiter Enable register */ + +/* + * Useful bits in the MSI Registers. + */ +#define MSI_ASYNC_MODE 0x80000000 /* Operate the MSI asynchronously */ + + +static inline void msi_set_sync(void) +{ + __asm__ __volatile__ ("lda [%0] %1, %%g3\n\t" + "andn %%g3, %2, %%g3\n\t" + "sta %%g3, [%0] %1\n\t" : : + "r" (MSI_MBUS_ARBEN), + "i" (ASI_M_CTL), "r" (MSI_ASYNC_MODE) : "g3"); +} + +#endif /* !(_SPARC_MSI_H) */ diff --git a/arch/sparc/include/asm/mutex.h b/arch/sparc/include/asm/mutex.h new file mode 100644 index 00000000000..458c1f7fbc1 --- /dev/null +++ b/arch/sparc/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include <asm-generic/mutex-dec.h> diff --git a/arch/sparc/include/asm/mxcc.h b/arch/sparc/include/asm/mxcc.h new file mode 100644 index 00000000000..c0517bd05bd --- /dev/null +++ b/arch/sparc/include/asm/mxcc.h @@ -0,0 +1,137 @@ +/* + * mxcc.h: Definitions of the Viking MXCC registers + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_MXCC_H +#define _SPARC_MXCC_H + +/* These registers are accessed through ASI 0x2. */ +#define MXCC_DATSTREAM 0x1C00000 /* Data stream register */ +#define MXCC_SRCSTREAM 0x1C00100 /* Source stream register */ +#define MXCC_DESSTREAM 0x1C00200 /* Destination stream register */ +#define MXCC_RMCOUNT 0x1C00300 /* Count of references and misses */ +#define MXCC_STEST 0x1C00804 /* Internal self-test */ +#define MXCC_CREG 0x1C00A04 /* Control register */ +#define MXCC_SREG 0x1C00B00 /* Status register */ +#define MXCC_RREG 0x1C00C04 /* Reset register */ +#define MXCC_EREG 0x1C00E00 /* Error code register */ +#define MXCC_PREG 0x1C00F04 /* Address port register */ + +/* Some MXCC constants. */ +#define MXCC_STREAM_SIZE 0x20 /* Size in bytes of one stream r/w */ + +/* The MXCC Control Register: + * + * ---------------------------------------------------------------------- + * | | RRC | RSV |PRE|MCE|PARE|ECE|RSV| + * ---------------------------------------------------------------------- + * 31 10 9 8-6 5 4 3 2 1-0 + * + * RRC: Controls what you read from MXCC_RMCOUNT reg. + * 0=Misses 1=References + * PRE: Prefetch enable + * MCE: Multiple Command Enable + * PARE: Parity enable + * ECE: External cache enable + */ + +#define MXCC_CTL_RRC 0x00000200 +#define MXCC_CTL_PRE 0x00000020 +#define MXCC_CTL_MCE 0x00000010 +#define MXCC_CTL_PARE 0x00000008 +#define MXCC_CTL_ECE 0x00000004 + +/* The MXCC Error Register: + * + * -------------------------------------------------------- + * |ME| RSV|CE|PEW|PEE|ASE|EIV| MOPC|ECODE|PRIV|RSV|HPADDR| + * -------------------------------------------------------- + * 31 30 29 28 27 26 25 24-15 14-7 6 5-3 2-0 + * + * ME: Multiple Errors have occurred + * CE: Cache consistency Error + * PEW: Parity Error during a Write operation + * PEE: Parity Error involving the External cache + * ASE: ASynchronous Error + * EIV: This register is toast + * MOPC: MXCC Operation Code for instance causing error + * ECODE: The Error CODE + * PRIV: A privileged mode error? 0=no 1=yes + * HPADDR: High PhysicalADDRess bits (35-32) + */ + +#define MXCC_ERR_ME 0x80000000 +#define MXCC_ERR_CE 0x20000000 +#define MXCC_ERR_PEW 0x10000000 +#define MXCC_ERR_PEE 0x08000000 +#define MXCC_ERR_ASE 0x04000000 +#define MXCC_ERR_EIV 0x02000000 +#define MXCC_ERR_MOPC 0x01FF8000 +#define MXCC_ERR_ECODE 0x00007F80 +#define MXCC_ERR_PRIV 0x00000040 +#define MXCC_ERR_HPADDR 0x0000000f + +/* The MXCC Port register: + * + * ----------------------------------------------------- + * | | MID | | + * ----------------------------------------------------- + * 31 21 20-18 17 0 + * + * MID: The moduleID of the cpu your read this from. + */ + +#ifndef __ASSEMBLY__ + +static inline void mxcc_set_stream_src(unsigned long *paddr) +{ + unsigned long data0 = paddr[0]; + unsigned long data1 = paddr[1]; + + __asm__ __volatile__ ("or %%g0, %0, %%g2\n\t" + "or %%g0, %1, %%g3\n\t" + "stda %%g2, [%2] %3\n\t" : : + "r" (data0), "r" (data1), + "r" (MXCC_SRCSTREAM), + "i" (ASI_M_MXCC) : "g2", "g3"); +} + +static inline void mxcc_set_stream_dst(unsigned long *paddr) +{ + unsigned long data0 = paddr[0]; + unsigned long data1 = paddr[1]; + + __asm__ __volatile__ ("or %%g0, %0, %%g2\n\t" + "or %%g0, %1, %%g3\n\t" + "stda %%g2, [%2] %3\n\t" : : + "r" (data0), "r" (data1), + "r" (MXCC_DESSTREAM), + "i" (ASI_M_MXCC) : "g2", "g3"); +} + +static inline unsigned long mxcc_get_creg(void) +{ + unsigned long mxcc_control; + + __asm__ __volatile__("set 0xffffffff, %%g2\n\t" + "set 0xffffffff, %%g3\n\t" + "stda %%g2, [%1] %2\n\t" + "lda [%3] %2, %0\n\t" : + "=r" (mxcc_control) : + "r" (MXCC_EREG), "i" (ASI_M_MXCC), + "r" (MXCC_CREG) : "g2", "g3"); + return mxcc_control; +} + +static inline void mxcc_set_creg(unsigned long mxcc_control) +{ + __asm__ __volatile__("sta %0, [%1] %2\n\t" : : + "r" (mxcc_control), "r" (MXCC_CREG), + "i" (ASI_M_MXCC)); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* !(_SPARC_MXCC_H) */ diff --git a/arch/sparc/include/asm/ns87303.h b/arch/sparc/include/asm/ns87303.h new file mode 100644 index 00000000000..686defe6aaa --- /dev/null +++ b/arch/sparc/include/asm/ns87303.h @@ -0,0 +1,118 @@ +/* ns87303.h: Configuration Register Description for the + * National Semiconductor PC87303 (SuperIO). + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + */ + +#ifndef _SPARC_NS87303_H +#define _SPARC_NS87303_H 1 + +/* + * Control Register Index Values + */ +#define FER 0x00 +#define FAR 0x01 +#define PTR 0x02 +#define FCR 0x03 +#define PCR 0x04 +#define KRR 0x05 +#define PMC 0x06 +#define TUP 0x07 +#define SID 0x08 +#define ASC 0x09 +#define CS0CF0 0x0a +#define CS0CF1 0x0b +#define CS1CF0 0x0c +#define CS1CF1 0x0d + +/* Function Enable Register (FER) bits */ +#define FER_EDM 0x10 /* Encoded Drive and Motor pin information */ + +/* Function Address Register (FAR) bits */ +#define FAR_LPT_MASK 0x03 +#define FAR_LPTB 0x00 +#define FAR_LPTA 0x01 +#define FAR_LPTC 0x02 + +/* Power and Test Register (PTR) bits */ +#define PTR_LPTB_IRQ7 0x08 +#define PTR_LEVEL_IRQ 0x80 /* When not ECP/EPP: Use level IRQ */ +#define PTR_LPT_REG_DIR 0x80 /* When ECP/EPP: LPT CTR controlls direction */ + /* of the parallel port */ + +/* Function Control Register (FCR) bits */ +#define FCR_LDE 0x10 /* Logical Drive Exchange */ +#define FCR_ZWS_ENA 0x20 /* Enable short host read/write in ECP/EPP */ + +/* Printer Control Register (PCR) bits */ +#define PCR_EPP_ENABLE 0x01 +#define PCR_EPP_IEEE 0x02 /* Enable EPP Version 1.9 (IEEE 1284) */ +#define PCR_ECP_ENABLE 0x04 +#define PCR_ECP_CLK_ENA 0x08 /* If 0 ECP Clock is stopped on Power down */ +#define PCR_IRQ_POLAR 0x20 /* If 0 IRQ is level high or negative pulse, */ + /* if 1 polarity is inverted */ +#define PCR_IRQ_ODRAIN 0x40 /* If 1, IRQ is open drain */ + +/* Tape UARTs and Parallel Port Config Register (TUP) bits */ +#define TUP_EPP_TIMO 0x02 /* Enable EPP timeout IRQ */ + +/* Advanced SuperIO Config Register (ASC) bits */ +#define ASC_LPT_IRQ7 0x01 /* Always use IRQ7 for LPT */ +#define ASC_DRV2_SEL 0x02 /* Logical Drive Exchange controlled by TDR */ + +#define FER_RESERVED 0x00 +#define FAR_RESERVED 0x00 +#define PTR_RESERVED 0x73 +#define FCR_RESERVED 0xc4 +#define PCR_RESERVED 0x10 +#define KRR_RESERVED 0x00 +#define PMC_RESERVED 0x98 +#define TUP_RESERVED 0xfb +#define SIP_RESERVED 0x00 +#define ASC_RESERVED 0x18 +#define CS0CF0_RESERVED 0x00 +#define CS0CF1_RESERVED 0x08 +#define CS1CF0_RESERVED 0x00 +#define CS1CF1_RESERVED 0x08 + +#ifdef __KERNEL__ + +#include <linux/spinlock.h> + +#include <asm/system.h> +#include <asm/io.h> + +extern spinlock_t ns87303_lock; + +static inline int ns87303_modify(unsigned long port, unsigned int index, + unsigned char clr, unsigned char set) +{ + static unsigned char reserved[] = { + FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED, + PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED, + SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED, + CS1CF0_RESERVED, CS1CF1_RESERVED + }; + unsigned long flags; + unsigned char value; + + if (index > 0x0d) + return -EINVAL; + + spin_lock_irqsave(&ns87303_lock, flags); + + outb(index, port); + value = inb(port + 1); + value &= ~(reserved[index] | clr); + value |= set; + outb(value, port + 1); + outb(value, port + 1); + + spin_unlock_irqrestore(&ns87303_lock, flags); + + return 0; +} + +#endif /* __KERNEL__ */ + +#endif /* !(_SPARC_NS87303_H) */ diff --git a/arch/sparc/include/asm/obio.h b/arch/sparc/include/asm/obio.h new file mode 100644 index 00000000000..1a7544ceb57 --- /dev/null +++ b/arch/sparc/include/asm/obio.h @@ -0,0 +1,249 @@ +/* + * obio.h: Some useful locations in 0xFXXXXXXXX PA obio space on sun4d. + * + * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz> + */ + +#ifndef _SPARC_OBIO_H +#define _SPARC_OBIO_H + +#include <asm/asi.h> + +/* This weird monster likes to use the very upper parts of + 36bit PA for these things :) */ + +/* CSR space (for each XDBUS) + * ------------------------------------------------------------------------ + * | 0xFE | DEVID | | XDBUS ID | | + * ------------------------------------------------------------------------ + * 35 28 27 20 19 10 9 8 7 0 + */ + +#define CSR_BASE_ADDR 0xe0000000 +#define CSR_CPU_SHIFT (32 - 4 - 5) +#define CSR_XDBUS_SHIFT 8 + +#define CSR_BASE(cpu) (((CSR_BASE_ADDR >> CSR_CPU_SHIFT) + cpu) << CSR_CPU_SHIFT) + +/* ECSR space (not for each XDBUS) + * ------------------------------------------------------------------------ + * | 0xF | DEVID[7:1] | | + * ------------------------------------------------------------------------ + * 35 32 31 25 24 0 + */ + +#define ECSR_BASE_ADDR 0x00000000 +#define ECSR_CPU_SHIFT (32 - 5) +#define ECSR_DEV_SHIFT (32 - 8) + +#define ECSR_BASE(cpu) ((cpu) << ECSR_CPU_SHIFT) +#define ECSR_DEV_BASE(devid) ((devid) << ECSR_DEV_SHIFT) + +/* Bus Watcher */ +#define BW_LOCAL_BASE 0xfff00000 + +#define BW_CID 0x00000000 +#define BW_DBUS_CTRL 0x00000008 +#define BW_DBUS_DATA 0x00000010 +#define BW_CTRL 0x00001000 +#define BW_INTR_TABLE 0x00001040 +#define BW_INTR_TABLE_CLEAR 0x00001080 +#define BW_PRESCALER 0x000010c0 +#define BW_PTIMER_LIMIT 0x00002000 +#define BW_PTIMER_COUNTER2 0x00002004 +#define BW_PTIMER_NDLIMIT 0x00002008 +#define BW_PTIMER_CTRL 0x0000200c +#define BW_PTIMER_COUNTER 0x00002010 +#define BW_TIMER_LIMIT 0x00003000 +#define BW_TIMER_COUNTER2 0x00003004 +#define BW_TIMER_NDLIMIT 0x00003008 +#define BW_TIMER_CTRL 0x0000300c +#define BW_TIMER_COUNTER 0x00003010 + +/* BW Control */ +#define BW_CTRL_USER_TIMER 0x00000004 /* Is User Timer Free run enabled */ + +/* Boot Bus */ +#define BB_LOCAL_BASE 0xf0000000 + +#define BB_STAT1 0x00100000 +#define BB_STAT2 0x00120000 +#define BB_STAT3 0x00140000 +#define BB_LEDS 0x002e0000 + +/* Bits in BB_STAT2 */ +#define BB_STAT2_AC_INTR 0x04 /* Aiee! 5ms and power is gone... */ +#define BB_STAT2_TMP_INTR 0x10 /* My Penguins are burning. Are you able to smell it? */ +#define BB_STAT2_FAN_INTR 0x20 /* My fan refuses to work */ +#define BB_STAT2_PWR_INTR 0x40 /* On SC2000, one of the two ACs died. Ok, we go on... */ +#define BB_STAT2_MASK (BB_STAT2_AC_INTR|BB_STAT2_TMP_INTR|BB_STAT2_FAN_INTR|BB_STAT2_PWR_INTR) + +/* Cache Controller */ +#define CC_BASE 0x1F00000 +#define CC_DATSTREAM 0x1F00000 /* Data stream register */ +#define CC_DATSIZE 0x1F0003F /* Size */ +#define CC_SRCSTREAM 0x1F00100 /* Source stream register */ +#define CC_DESSTREAM 0x1F00200 /* Destination stream register */ +#define CC_RMCOUNT 0x1F00300 /* Count of references and misses */ +#define CC_IPEN 0x1F00406 /* Pending Interrupts */ +#define CC_IMSK 0x1F00506 /* Interrupt Mask */ +#define CC_ICLR 0x1F00606 /* Clear pending Interrupts */ +#define CC_IGEN 0x1F00704 /* Generate Interrupt register */ +#define CC_STEST 0x1F00804 /* Internal self-test */ +#define CC_CREG 0x1F00A04 /* Control register */ +#define CC_SREG 0x1F00B00 /* Status register */ +#define CC_RREG 0x1F00C04 /* Reset register */ +#define CC_EREG 0x1F00E00 /* Error code register */ +#define CC_CID 0x1F00F04 /* Component ID */ + +#ifndef __ASSEMBLY__ + +static inline int bw_get_intr_mask(int sbus_level) +{ + int mask; + + __asm__ __volatile__ ("lduha [%1] %2, %0" : + "=r" (mask) : + "r" (BW_LOCAL_BASE + BW_INTR_TABLE + (sbus_level << 3)), + "i" (ASI_M_CTL)); + return mask; +} + +static inline void bw_clear_intr_mask(int sbus_level, int mask) +{ + __asm__ __volatile__ ("stha %0, [%1] %2" : : + "r" (mask), + "r" (BW_LOCAL_BASE + BW_INTR_TABLE_CLEAR + (sbus_level << 3)), + "i" (ASI_M_CTL)); +} + +static inline unsigned bw_get_prof_limit(int cpu) +{ + unsigned limit; + + __asm__ __volatile__ ("lda [%1] %2, %0" : + "=r" (limit) : + "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT), + "i" (ASI_M_CTL)); + return limit; +} + +static inline void bw_set_prof_limit(int cpu, unsigned limit) +{ + __asm__ __volatile__ ("sta %0, [%1] %2" : : + "r" (limit), + "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT), + "i" (ASI_M_CTL)); +} + +static inline unsigned bw_get_ctrl(int cpu) +{ + unsigned ctrl; + + __asm__ __volatile__ ("lda [%1] %2, %0" : + "=r" (ctrl) : + "r" (CSR_BASE(cpu) + BW_CTRL), + "i" (ASI_M_CTL)); + return ctrl; +} + +static inline void bw_set_ctrl(int cpu, unsigned ctrl) +{ + __asm__ __volatile__ ("sta %0, [%1] %2" : : + "r" (ctrl), + "r" (CSR_BASE(cpu) + BW_CTRL), + "i" (ASI_M_CTL)); +} + +extern unsigned char cpu_leds[32]; + +static inline void show_leds(int cpuid) +{ + cpuid &= 0x1e; + __asm__ __volatile__ ("stba %0, [%1] %2" : : + "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]), + "r" (ECSR_BASE(cpuid) | BB_LEDS), + "i" (ASI_M_CTL)); +} + +static inline unsigned cc_get_ipen(void) +{ + unsigned pending; + + __asm__ __volatile__ ("lduha [%1] %2, %0" : + "=r" (pending) : + "r" (CC_IPEN), + "i" (ASI_M_MXCC)); + return pending; +} + +static inline void cc_set_iclr(unsigned clear) +{ + __asm__ __volatile__ ("stha %0, [%1] %2" : : + "r" (clear), + "r" (CC_ICLR), + "i" (ASI_M_MXCC)); +} + +static inline unsigned cc_get_imsk(void) +{ + unsigned mask; + + __asm__ __volatile__ ("lduha [%1] %2, %0" : + "=r" (mask) : + "r" (CC_IMSK), + "i" (ASI_M_MXCC)); + return mask; +} + +static inline void cc_set_imsk(unsigned mask) +{ + __asm__ __volatile__ ("stha %0, [%1] %2" : : + "r" (mask), + "r" (CC_IMSK), + "i" (ASI_M_MXCC)); +} + +static inline unsigned cc_get_imsk_other(int cpuid) +{ + unsigned mask; + + __asm__ __volatile__ ("lduha [%1] %2, %0" : + "=r" (mask) : + "r" (ECSR_BASE(cpuid) | CC_IMSK), + "i" (ASI_M_CTL)); + return mask; +} + +static inline void cc_set_imsk_other(int cpuid, unsigned mask) +{ + __asm__ __volatile__ ("stha %0, [%1] %2" : : + "r" (mask), + "r" (ECSR_BASE(cpuid) | CC_IMSK), + "i" (ASI_M_CTL)); +} + +static inline void cc_set_igen(unsigned gen) +{ + __asm__ __volatile__ ("sta %0, [%1] %2" : : + "r" (gen), + "r" (CC_IGEN), + "i" (ASI_M_MXCC)); +} + +/* +-------+-------------+-----------+------------------------------------+ + * | bcast | devid | sid | levels mask | + * +-------+-------------+-----------+------------------------------------+ + * 31 30 23 22 15 14 0 + */ +#define IGEN_MESSAGE(bcast, devid, sid, levels) \ + (((bcast) << 31) | ((devid) << 23) | ((sid) << 15) | (levels)) + +static inline void sun4d_send_ipi(int cpu, int level) +{ + cc_set_igen(IGEN_MESSAGE(0, cpu << 3, 6 + ((level >> 1) & 7), 1 << (level - 1))); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* !(_SPARC_OBIO_H) */ diff --git a/arch/sparc/include/asm/of_device.h b/arch/sparc/include/asm/of_device.h new file mode 100644 index 00000000000..e5f5aedc229 --- /dev/null +++ b/arch/sparc/include/asm/of_device.h @@ -0,0 +1,38 @@ +#ifndef _ASM_SPARC_OF_DEVICE_H +#define _ASM_SPARC_OF_DEVICE_H +#ifdef __KERNEL__ + +#include <linux/device.h> +#include <linux/of.h> +#include <linux/mod_devicetable.h> +#include <asm/openprom.h> + +/* + * The of_device is a kind of "base class" that is a superset of + * struct device for use by devices attached to an OF node and + * probed using OF properties. + */ +struct of_device +{ + struct device_node *node; + struct device dev; + struct resource resource[PROMREG_MAX]; + unsigned int irqs[PROMINTR_MAX]; + int num_irqs; + + void *sysdata; + + int slot; + int portid; + int clock_freq; +}; + +extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name); +extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size); + +/* These are just here during the transition */ +#include <linux/of_device.h> +#include <linux/of_platform.h> + +#endif /* __KERNEL__ */ +#endif /* _ASM_SPARC_OF_DEVICE_H */ diff --git a/arch/sparc/include/asm/of_platform.h b/arch/sparc/include/asm/of_platform.h new file mode 100644 index 00000000000..aa699775ffb --- /dev/null +++ b/arch/sparc/include/asm/of_platform.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_OF_PLATFORM_H +#define ___ASM_SPARC_OF_PLATFORM_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/of_platform_64.h> +#else +#include <asm/of_platform_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/of_platform_32.h b/arch/sparc/include/asm/of_platform_32.h new file mode 100644 index 00000000000..723f7c9b741 --- /dev/null +++ b/arch/sparc/include/asm/of_platform_32.h @@ -0,0 +1,24 @@ +#ifndef _ASM_SPARC_OF_PLATFORM_H +#define _ASM_SPARC_OF_PLATFORM_H +/* + * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. + * <benh@kernel.crashing.org> + * Modified for Sparc by merging parts of asm/of_device.h + * by Stephen Rothwell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +/* This is just here during the transition */ +#include <linux/of_platform.h> + +extern struct bus_type ebus_bus_type; +extern struct bus_type sbus_bus_type; + +#define of_bus_type of_platform_bus_type /* for compatibility */ + +#endif /* _ASM_SPARC_OF_PLATFORM_H */ diff --git a/arch/sparc/include/asm/of_platform_64.h b/arch/sparc/include/asm/of_platform_64.h new file mode 100644 index 00000000000..4f66a5f6342 --- /dev/null +++ b/arch/sparc/include/asm/of_platform_64.h @@ -0,0 +1,25 @@ +#ifndef _ASM_SPARC64_OF_PLATFORM_H +#define _ASM_SPARC64_OF_PLATFORM_H +/* + * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. + * <benh@kernel.crashing.org> + * Modified for Sparc by merging parts of asm/of_device.h + * by Stephen Rothwell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +/* This is just here during the transition */ +#include <linux/of_platform.h> + +extern struct bus_type isa_bus_type; +extern struct bus_type ebus_bus_type; +extern struct bus_type sbus_bus_type; + +#define of_bus_type of_platform_bus_type /* for compatibility */ + +#endif /* _ASM_SPARC64_OF_PLATFORM_H */ diff --git a/arch/sparc/include/asm/openprom.h b/arch/sparc/include/asm/openprom.h new file mode 100644 index 00000000000..aaeae905ed3 --- /dev/null +++ b/arch/sparc/include/asm/openprom.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_OPENPROM_H +#define ___ASM_SPARC_OPENPROM_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/openprom_64.h> +#else +#include <asm/openprom_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/openprom_32.h b/arch/sparc/include/asm/openprom_32.h new file mode 100644 index 00000000000..8b1649f29ed --- /dev/null +++ b/arch/sparc/include/asm/openprom_32.h @@ -0,0 +1,255 @@ +#ifndef __SPARC_OPENPROM_H +#define __SPARC_OPENPROM_H + +/* openprom.h: Prom structures and defines for access to the OPENBOOT + * prom routines and data areas. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +/* Empirical constants... */ +#define LINUX_OPPROM_MAGIC 0x10010407 + +#ifndef __ASSEMBLY__ +/* V0 prom device operations. */ +struct linux_dev_v0_funcs { + int (*v0_devopen)(char *device_str); + int (*v0_devclose)(int dev_desc); + int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf); + int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf); + int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf); + int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf); + int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf); + int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf); + int (*v0_seekdev)(int dev_desc, long logical_offst, int from); +}; + +/* V2 and later prom device operations. */ +struct linux_dev_v2_funcs { + int (*v2_inst2pkg)(int d); /* Convert ihandle to phandle */ + char * (*v2_dumb_mem_alloc)(char *va, unsigned sz); + void (*v2_dumb_mem_free)(char *va, unsigned sz); + + /* To map devices into virtual I/O space. */ + char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz); + void (*v2_dumb_munmap)(char *virta, unsigned size); + + int (*v2_dev_open)(char *devpath); + void (*v2_dev_close)(int d); + int (*v2_dev_read)(int d, char *buf, int nbytes); + int (*v2_dev_write)(int d, char *buf, int nbytes); + int (*v2_dev_seek)(int d, int hi, int lo); + + /* Never issued (multistage load support) */ + void (*v2_wheee2)(void); + void (*v2_wheee3)(void); +}; + +struct linux_mlist_v0 { + struct linux_mlist_v0 *theres_more; + char *start_adr; + unsigned num_bytes; +}; + +struct linux_mem_v0 { + struct linux_mlist_v0 **v0_totphys; + struct linux_mlist_v0 **v0_prommap; + struct linux_mlist_v0 **v0_available; /* What we can use */ +}; + +/* Arguments sent to the kernel from the boot prompt. */ +struct linux_arguments_v0 { + char *argv[8]; + char args[100]; + char boot_dev[2]; + int boot_dev_ctrl; + int boot_dev_unit; + int dev_partition; + char *kernel_file_name; + void *aieee1; /* XXX */ +}; + +/* V2 and up boot things. */ +struct linux_bootargs_v2 { + char **bootpath; + char **bootargs; + int *fd_stdin; + int *fd_stdout; +}; + +/* The top level PROM vector. */ +struct linux_romvec { + /* Version numbers. */ + unsigned int pv_magic_cookie; + unsigned int pv_romvers; + unsigned int pv_plugin_revision; + unsigned int pv_printrev; + + /* Version 0 memory descriptors. */ + struct linux_mem_v0 pv_v0mem; + + /* Node operations. */ + struct linux_nodeops *pv_nodeops; + + char **pv_bootstr; + struct linux_dev_v0_funcs pv_v0devops; + + char *pv_stdin; + char *pv_stdout; +#define PROMDEV_KBD 0 /* input from keyboard */ +#define PROMDEV_SCREEN 0 /* output to screen */ +#define PROMDEV_TTYA 1 /* in/out to ttya */ +#define PROMDEV_TTYB 2 /* in/out to ttyb */ + + /* Blocking getchar/putchar. NOT REENTRANT! (grr) */ + int (*pv_getchar)(void); + void (*pv_putchar)(int ch); + + /* Non-blocking variants. */ + int (*pv_nbgetchar)(void); + int (*pv_nbputchar)(int ch); + + void (*pv_putstr)(char *str, int len); + + /* Miscellany. */ + void (*pv_reboot)(char *bootstr); + void (*pv_printf)(__const__ char *fmt, ...); + void (*pv_abort)(void); + __volatile__ int *pv_ticks; + void (*pv_halt)(void); + void (**pv_synchook)(void); + + /* Evaluate a forth string, not different proto for V0 and V2->up. */ + union { + void (*v0_eval)(int len, char *str); + void (*v2_eval)(char *str); + } pv_fortheval; + + struct linux_arguments_v0 **pv_v0bootargs; + + /* Get ether address. */ + unsigned int (*pv_enaddr)(int d, char *enaddr); + + struct linux_bootargs_v2 pv_v2bootargs; + struct linux_dev_v2_funcs pv_v2devops; + + int filler[15]; + + /* This one is sun4c/sun4 only. */ + void (*pv_setctxt)(int ctxt, char *va, int pmeg); + + /* Prom version 3 Multiprocessor routines. This stuff is crazy. + * No joke. Calling these when there is only one cpu probably + * crashes the machine, have to test this. :-) + */ + + /* v3_cpustart() will start the cpu 'whichcpu' in mmu-context + * 'thiscontext' executing at address 'prog_counter' + */ + int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr, + int thiscontext, char *prog_counter); + + /* v3_cpustop() will cause cpu 'whichcpu' to stop executing + * until a resume cpu call is made. + */ + int (*v3_cpustop)(unsigned int whichcpu); + + /* v3_cpuidle() will idle cpu 'whichcpu' until a stop or + * resume cpu call is made. + */ + int (*v3_cpuidle)(unsigned int whichcpu); + + /* v3_cpuresume() will resume processor 'whichcpu' executing + * starting with whatever 'pc' and 'npc' were left at the + * last 'idle' or 'stop' call. + */ + int (*v3_cpuresume)(unsigned int whichcpu); +}; + +/* Routines for traversing the prom device tree. */ +struct linux_nodeops { + int (*no_nextnode)(int node); + int (*no_child)(int node); + int (*no_proplen)(int node, char *name); + int (*no_getprop)(int node, char *name, char *val); + int (*no_setprop)(int node, char *name, char *val, int len); + char * (*no_nextprop)(int node, char *name); +}; + +/* More fun PROM structures for device probing. */ +#define PROMREG_MAX 16 +#define PROMVADDR_MAX 16 +#define PROMINTR_MAX 15 + +struct linux_prom_registers { + unsigned int which_io; /* is this in OBIO space? */ + unsigned int phys_addr; /* The physical address of this register */ + unsigned int reg_size; /* How many bytes does this register take up? */ +}; + +struct linux_prom_irqs { + int pri; /* IRQ priority */ + int vector; /* This is foobar, what does it do? */ +}; + +/* Element of the "ranges" vector */ +struct linux_prom_ranges { + unsigned int ot_child_space; + unsigned int ot_child_base; /* Bus feels this */ + unsigned int ot_parent_space; + unsigned int ot_parent_base; /* CPU looks from here */ + unsigned int or_size; +}; + +/* Ranges and reg properties are a bit different for PCI. */ +struct linux_prom_pci_registers { + /* + * We don't know what information this field contain. + * We guess, PCI device function is in bits 15:8 + * So, ... + */ + unsigned int which_io; /* Let it be which_io */ + + unsigned int phys_hi; + unsigned int phys_lo; + + unsigned int size_hi; + unsigned int size_lo; +}; + +struct linux_prom_pci_ranges { + unsigned int child_phys_hi; /* Only certain bits are encoded here. */ + unsigned int child_phys_mid; + unsigned int child_phys_lo; + + unsigned int parent_phys_hi; + unsigned int parent_phys_lo; + + unsigned int size_hi; + unsigned int size_lo; +}; + +struct linux_prom_pci_assigned_addresses { + unsigned int which_io; + + unsigned int phys_hi; + unsigned int phys_lo; + + unsigned int size_hi; + unsigned int size_lo; +}; + +struct linux_prom_ebus_ranges { + unsigned int child_phys_hi; + unsigned int child_phys_lo; + + unsigned int parent_phys_hi; + unsigned int parent_phys_mid; + unsigned int parent_phys_lo; + + unsigned int size; +}; + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(__SPARC_OPENPROM_H) */ diff --git a/arch/sparc/include/asm/openprom_64.h b/arch/sparc/include/asm/openprom_64.h new file mode 100644 index 00000000000..b69e4a8c917 --- /dev/null +++ b/arch/sparc/include/asm/openprom_64.h @@ -0,0 +1,280 @@ +#ifndef __SPARC64_OPENPROM_H +#define __SPARC64_OPENPROM_H + +/* openprom.h: Prom structures and defines for access to the OPENBOOT + * prom routines and data areas. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef __ASSEMBLY__ +/* V0 prom device operations. */ +struct linux_dev_v0_funcs { + int (*v0_devopen)(char *device_str); + int (*v0_devclose)(int dev_desc); + int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf); + int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf); + int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf); + int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf); + int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf); + int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf); + int (*v0_seekdev)(int dev_desc, long logical_offst, int from); +}; + +/* V2 and later prom device operations. */ +struct linux_dev_v2_funcs { + int (*v2_inst2pkg)(int d); /* Convert ihandle to phandle */ + char * (*v2_dumb_mem_alloc)(char *va, unsigned sz); + void (*v2_dumb_mem_free)(char *va, unsigned sz); + + /* To map devices into virtual I/O space. */ + char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz); + void (*v2_dumb_munmap)(char *virta, unsigned size); + + int (*v2_dev_open)(char *devpath); + void (*v2_dev_close)(int d); + int (*v2_dev_read)(int d, char *buf, int nbytes); + int (*v2_dev_write)(int d, char *buf, int nbytes); + int (*v2_dev_seek)(int d, int hi, int lo); + + /* Never issued (multistage load support) */ + void (*v2_wheee2)(void); + void (*v2_wheee3)(void); +}; + +struct linux_mlist_v0 { + struct linux_mlist_v0 *theres_more; + unsigned start_adr; + unsigned num_bytes; +}; + +struct linux_mem_v0 { + struct linux_mlist_v0 **v0_totphys; + struct linux_mlist_v0 **v0_prommap; + struct linux_mlist_v0 **v0_available; /* What we can use */ +}; + +/* Arguments sent to the kernel from the boot prompt. */ +struct linux_arguments_v0 { + char *argv[8]; + char args[100]; + char boot_dev[2]; + int boot_dev_ctrl; + int boot_dev_unit; + int dev_partition; + char *kernel_file_name; + void *aieee1; /* XXX */ +}; + +/* V2 and up boot things. */ +struct linux_bootargs_v2 { + char **bootpath; + char **bootargs; + int *fd_stdin; + int *fd_stdout; +}; + +/* The top level PROM vector. */ +struct linux_romvec { + /* Version numbers. */ + unsigned int pv_magic_cookie; + unsigned int pv_romvers; + unsigned int pv_plugin_revision; + unsigned int pv_printrev; + + /* Version 0 memory descriptors. */ + struct linux_mem_v0 pv_v0mem; + + /* Node operations. */ + struct linux_nodeops *pv_nodeops; + + char **pv_bootstr; + struct linux_dev_v0_funcs pv_v0devops; + + char *pv_stdin; + char *pv_stdout; +#define PROMDEV_KBD 0 /* input from keyboard */ +#define PROMDEV_SCREEN 0 /* output to screen */ +#define PROMDEV_TTYA 1 /* in/out to ttya */ +#define PROMDEV_TTYB 2 /* in/out to ttyb */ + + /* Blocking getchar/putchar. NOT REENTRANT! (grr) */ + int (*pv_getchar)(void); + void (*pv_putchar)(int ch); + + /* Non-blocking variants. */ + int (*pv_nbgetchar)(void); + int (*pv_nbputchar)(int ch); + + void (*pv_putstr)(char *str, int len); + + /* Miscellany. */ + void (*pv_reboot)(char *bootstr); + void (*pv_printf)(__const__ char *fmt, ...); + void (*pv_abort)(void); + __volatile__ int *pv_ticks; + void (*pv_halt)(void); + void (**pv_synchook)(void); + + /* Evaluate a forth string, not different proto for V0 and V2->up. */ + union { + void (*v0_eval)(int len, char *str); + void (*v2_eval)(char *str); + } pv_fortheval; + + struct linux_arguments_v0 **pv_v0bootargs; + + /* Get ether address. */ + unsigned int (*pv_enaddr)(int d, char *enaddr); + + struct linux_bootargs_v2 pv_v2bootargs; + struct linux_dev_v2_funcs pv_v2devops; + + int filler[15]; + + /* This one is sun4c/sun4 only. */ + void (*pv_setctxt)(int ctxt, char *va, int pmeg); + + /* Prom version 3 Multiprocessor routines. This stuff is crazy. + * No joke. Calling these when there is only one cpu probably + * crashes the machine, have to test this. :-) + */ + + /* v3_cpustart() will start the cpu 'whichcpu' in mmu-context + * 'thiscontext' executing at address 'prog_counter' + */ + int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr, + int thiscontext, char *prog_counter); + + /* v3_cpustop() will cause cpu 'whichcpu' to stop executing + * until a resume cpu call is made. + */ + int (*v3_cpustop)(unsigned int whichcpu); + + /* v3_cpuidle() will idle cpu 'whichcpu' until a stop or + * resume cpu call is made. + */ + int (*v3_cpuidle)(unsigned int whichcpu); + + /* v3_cpuresume() will resume processor 'whichcpu' executing + * starting with whatever 'pc' and 'npc' were left at the + * last 'idle' or 'stop' call. + */ + int (*v3_cpuresume)(unsigned int whichcpu); +}; + +/* Routines for traversing the prom device tree. */ +struct linux_nodeops { + int (*no_nextnode)(int node); + int (*no_child)(int node); + int (*no_proplen)(int node, char *name); + int (*no_getprop)(int node, char *name, char *val); + int (*no_setprop)(int node, char *name, char *val, int len); + char * (*no_nextprop)(int node, char *name); +}; + +/* More fun PROM structures for device probing. */ +#define PROMREG_MAX 24 +#define PROMVADDR_MAX 16 +#define PROMINTR_MAX 32 + +struct linux_prom_registers { + unsigned which_io; /* hi part of physical address */ + unsigned phys_addr; /* The physical address of this register */ + int reg_size; /* How many bytes does this register take up? */ +}; + +struct linux_prom64_registers { + unsigned long phys_addr; + unsigned long reg_size; +}; + +struct linux_prom_irqs { + int pri; /* IRQ priority */ + int vector; /* This is foobar, what does it do? */ +}; + +/* Element of the "ranges" vector */ +struct linux_prom_ranges { + unsigned int ot_child_space; + unsigned int ot_child_base; /* Bus feels this */ + unsigned int ot_parent_space; + unsigned int ot_parent_base; /* CPU looks from here */ + unsigned int or_size; +}; + +struct linux_prom64_ranges { + unsigned long ot_child_base; /* Bus feels this */ + unsigned long ot_parent_base; /* CPU looks from here */ + unsigned long or_size; +}; + +/* Ranges and reg properties are a bit different for PCI. */ +struct linux_prom_pci_registers { + unsigned int phys_hi; + unsigned int phys_mid; + unsigned int phys_lo; + + unsigned int size_hi; + unsigned int size_lo; +}; + +struct linux_prom_pci_ranges { + unsigned int child_phys_hi; /* Only certain bits are encoded here. */ + unsigned int child_phys_mid; + unsigned int child_phys_lo; + + unsigned int parent_phys_hi; + unsigned int parent_phys_lo; + + unsigned int size_hi; + unsigned int size_lo; +}; + +struct linux_prom_pci_intmap { + unsigned int phys_hi; + unsigned int phys_mid; + unsigned int phys_lo; + + unsigned int interrupt; + + int cnode; + unsigned int cinterrupt; +}; + +struct linux_prom_pci_intmask { + unsigned int phys_hi; + unsigned int phys_mid; + unsigned int phys_lo; + unsigned int interrupt; +}; + +struct linux_prom_ebus_ranges { + unsigned int child_phys_hi; + unsigned int child_phys_lo; + + unsigned int parent_phys_hi; + unsigned int parent_phys_mid; + unsigned int parent_phys_lo; + + unsigned int size; +}; + +struct linux_prom_ebus_intmap { + unsigned int phys_hi; + unsigned int phys_lo; + + unsigned int interrupt; + + int cnode; + unsigned int cinterrupt; +}; + +struct linux_prom_ebus_intmask { + unsigned int phys_hi; + unsigned int phys_lo; + unsigned int interrupt; +}; +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(__SPARC64_OPENPROM_H) */ diff --git a/arch/sparc/include/asm/openpromio.h b/arch/sparc/include/asm/openpromio.h new file mode 100644 index 00000000000..917fb8e9c63 --- /dev/null +++ b/arch/sparc/include/asm/openpromio.h @@ -0,0 +1,69 @@ +#ifndef _SPARC_OPENPROMIO_H +#define _SPARC_OPENPROMIO_H + +#include <linux/compiler.h> +#include <linux/ioctl.h> +#include <linux/types.h> + +/* + * SunOS and Solaris /dev/openprom definitions. The ioctl values + * were chosen to be exactly equal to the SunOS equivalents. + */ + +struct openpromio +{ + u_int oprom_size; /* Actual size of the oprom_array. */ + char oprom_array[1]; /* Holds property names and values. */ +}; + +#define OPROMMAXPARAM 4096 /* Maximum size of oprom_array. */ + +#define OPROMGETOPT 0x20004F01 +#define OPROMSETOPT 0x20004F02 +#define OPROMNXTOPT 0x20004F03 +#define OPROMSETOPT2 0x20004F04 +#define OPROMNEXT 0x20004F05 +#define OPROMCHILD 0x20004F06 +#define OPROMGETPROP 0x20004F07 +#define OPROMNXTPROP 0x20004F08 +#define OPROMU2P 0x20004F09 +#define OPROMGETCONS 0x20004F0A +#define OPROMGETFBNAME 0x20004F0B +#define OPROMGETBOOTARGS 0x20004F0C +/* Linux extensions */ /* Arguments in oprom_array: */ +#define OPROMSETCUR 0x20004FF0 /* int node - Sets current node */ +#define OPROMPCI2NODE 0x20004FF1 /* int pci_bus, pci_devfn - Sets current node to PCI device's node */ +#define OPROMPATH2NODE 0x20004FF2 /* char path[] - Set current node from fully qualified PROM path */ + +/* + * Return values from OPROMGETCONS: + */ + +#define OPROMCONS_NOT_WSCONS 0 +#define OPROMCONS_STDIN_IS_KBD 0x1 /* stdin device is kbd */ +#define OPROMCONS_STDOUT_IS_FB 0x2 /* stdout is a framebuffer */ +#define OPROMCONS_OPENPROM 0x4 /* supports openboot */ + + +/* + * NetBSD/OpenBSD /dev/openprom definitions. + */ + +struct opiocdesc +{ + int op_nodeid; /* PROM Node ID (value-result) */ + int op_namelen; /* Length of op_name. */ + char __user *op_name; /* Pointer to the property name. */ + int op_buflen; /* Length of op_buf (value-result) */ + char __user *op_buf; /* Pointer to buffer. */ +}; + +#define OPIOCGET _IOWR('O', 1, struct opiocdesc) +#define OPIOCSET _IOW('O', 2, struct opiocdesc) +#define OPIOCNEXTPROP _IOWR('O', 3, struct opiocdesc) +#define OPIOCGETOPTNODE _IOR('O', 4, int) +#define OPIOCGETNEXT _IOWR('O', 5, int) +#define OPIOCGETCHILD _IOWR('O', 6, int) + +#endif /* _SPARC_OPENPROMIO_H */ + diff --git a/arch/sparc/include/asm/oplib.h b/arch/sparc/include/asm/oplib.h new file mode 100644 index 00000000000..72e04e13a6b --- /dev/null +++ b/arch/sparc/include/asm/oplib.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_OPLIB_H +#define ___ASM_SPARC_OPLIB_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/oplib_64.h> +#else +#include <asm/oplib_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h new file mode 100644 index 00000000000..b2631da259e --- /dev/null +++ b/arch/sparc/include/asm/oplib_32.h @@ -0,0 +1,272 @@ +/* + * oplib.h: Describes the interface and available routines in the + * Linux Prom library. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef __SPARC_OPLIB_H +#define __SPARC_OPLIB_H + +#include <asm/openprom.h> +#include <linux/spinlock.h> +#include <linux/compiler.h> + +/* The master romvec pointer... */ +extern struct linux_romvec *romvec; + +/* Enumeration to describe the prom major version we have detected. */ +enum prom_major_version { + PROM_V0, /* Original sun4c V0 prom */ + PROM_V2, /* sun4c and early sun4m V2 prom */ + PROM_V3, /* sun4m and later, up to sun4d/sun4e machines V3 */ + PROM_P1275, /* IEEE compliant ISA based Sun PROM, only sun4u */ + PROM_SUN4, /* Old sun4 proms are totally different, but we'll shoehorn it to make it fit */ +}; + +extern enum prom_major_version prom_vers; +/* Revision, and firmware revision. */ +extern unsigned int prom_rev, prom_prev; + +/* Root node of the prom device tree, this stays constant after + * initialization is complete. + */ +extern int prom_root_node; + +/* Pointer to prom structure containing the device tree traversal + * and usage utility functions. Only prom-lib should use these, + * users use the interface defined by the library only! + */ +extern struct linux_nodeops *prom_nodeops; + +/* The functions... */ + +/* You must call prom_init() before using any of the library services, + * preferably as early as possible. Pass it the romvec pointer. + */ +extern void prom_init(struct linux_romvec *rom_ptr); + +/* Boot argument acquisition, returns the boot command line string. */ +extern char *prom_getbootargs(void); + +/* Device utilities. */ + +/* Map and unmap devices in IO space at virtual addresses. Note that the + * virtual address you pass is a request and the prom may put your mappings + * somewhere else, so check your return value as that is where your new + * mappings really are! + * + * Another note, these are only available on V2 or higher proms! + */ +extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes); +extern void prom_unmapio(char *virt_addr, unsigned int num_bytes); + +/* Device operations. */ + +/* Open the device described by the passed string. Note, that the format + * of the string is different on V0 vs. V2->higher proms. The caller must + * know what he/she is doing! Returns the device descriptor, an int. + */ +extern int prom_devopen(char *device_string); + +/* Close a previously opened device described by the passed integer + * descriptor. + */ +extern int prom_devclose(int device_handle); + +/* Do a seek operation on the device described by the passed integer + * descriptor. + */ +extern void prom_seek(int device_handle, unsigned int seek_hival, + unsigned int seek_lowval); + +/* Miscellaneous routines, don't really fit in any category per se. */ + +/* Reboot the machine with the command line passed. */ +extern void prom_reboot(char *boot_command); + +/* Evaluate the forth string passed. */ +extern void prom_feval(char *forth_string); + +/* Enter the prom, with possibility of continuation with the 'go' + * command in newer proms. + */ +extern void prom_cmdline(void); + +/* Enter the prom, with no chance of continuation for the stand-alone + * which calls this. + */ +extern void prom_halt(void) __attribute__ ((noreturn)); + +/* Set the PROM 'sync' callback function to the passed function pointer. + * When the user gives the 'sync' command at the prom prompt while the + * kernel is still active, the prom will call this routine. + * + * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX + */ +typedef void (*sync_func_t)(void); +extern void prom_setsync(sync_func_t func_ptr); + +/* Acquire the IDPROM of the root node in the prom device tree. This + * gets passed a buffer where you would like it stuffed. The return value + * is the format type of this idprom or 0xff on error. + */ +extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size); + +/* Get the prom major version. */ +extern int prom_version(void); + +/* Get the prom plugin revision. */ +extern int prom_getrev(void); + +/* Get the prom firmware revision. */ +extern int prom_getprev(void); + +/* Character operations to/from the console.... */ + +/* Non-blocking get character from console. */ +extern int prom_nbgetchar(void); + +/* Non-blocking put character to console. */ +extern int prom_nbputchar(char character); + +/* Blocking get character from console. */ +extern char prom_getchar(void); + +/* Blocking put character to console. */ +extern void prom_putchar(char character); + +/* Prom's internal routines, don't use in kernel/boot code. */ +extern void prom_printf(char *fmt, ...); +extern void prom_write(const char *buf, unsigned int len); + +/* Multiprocessor operations... */ + +/* Start the CPU with the given device tree node, context table, and context + * at the passed program counter. + */ +extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table, + int context, char *program_counter); + +/* Stop the CPU with the passed device tree node. */ +extern int prom_stopcpu(int cpunode); + +/* Idle the CPU with the passed device tree node. */ +extern int prom_idlecpu(int cpunode); + +/* Re-Start the CPU with the passed device tree node. */ +extern int prom_restartcpu(int cpunode); + +/* PROM memory allocation facilities... */ + +/* Allocated at possibly the given virtual address a chunk of the + * indicated size. + */ +extern char *prom_alloc(char *virt_hint, unsigned int size); + +/* Free a previously allocated chunk. */ +extern void prom_free(char *virt_addr, unsigned int size); + +/* Sun4/sun4c specific memory-management startup hook. */ + +/* Map the passed segment in the given context at the passed + * virtual address. + */ +extern void prom_putsegment(int context, unsigned long virt_addr, + int physical_segment); + + +/* PROM device tree traversal functions... */ + +#ifdef PROMLIB_INTERNAL + +/* Internal version of prom_getchild. */ +extern int __prom_getchild(int parent_node); + +/* Internal version of prom_getsibling. */ +extern int __prom_getsibling(int node); + +#endif + + +/* Get the child node of the given node, or zero if no child exists. */ +extern int prom_getchild(int parent_node); + +/* Get the next sibling node of the given node, or zero if no further + * siblings exist. + */ +extern int prom_getsibling(int node); + +/* Get the length, at the passed node, of the given property type. + * Returns -1 on error (ie. no such property at this node). + */ +extern int prom_getproplen(int thisnode, char *property); + +/* Fetch the requested property using the given buffer. Returns + * the number of bytes the prom put into your buffer or -1 on error. + */ +extern int __must_check prom_getproperty(int thisnode, char *property, + char *prop_buffer, int propbuf_size); + +/* Acquire an integer property. */ +extern int prom_getint(int node, char *property); + +/* Acquire an integer property, with a default value. */ +extern int prom_getintdefault(int node, char *property, int defval); + +/* Acquire a boolean property, 0=FALSE 1=TRUE. */ +extern int prom_getbool(int node, char *prop); + +/* Acquire a string property, null string on error. */ +extern void prom_getstring(int node, char *prop, char *buf, int bufsize); + +/* Does the passed node have the given "name"? YES=1 NO=0 */ +extern int prom_nodematch(int thisnode, char *name); + +/* Search all siblings starting at the passed node for "name" matching + * the given string. Returns the node on success, zero on failure. + */ +extern int prom_searchsiblings(int node_start, char *name); + +/* Return the first property type, as a string, for the given node. + * Returns a null string on error. + */ +extern char *prom_firstprop(int node, char *buffer); + +/* Returns the next property after the passed property for the given + * node. Returns null string on failure. + */ +extern char *prom_nextprop(int node, char *prev_property, char *buffer); + +/* Returns phandle of the path specified */ +extern int prom_finddevice(char *name); + +/* Returns 1 if the specified node has given property. */ +extern int prom_node_has_property(int node, char *property); + +/* Set the indicated property at the given node with the passed value. + * Returns the number of bytes of your value that the prom took. + */ +extern int prom_setprop(int node, char *prop_name, char *prop_value, + int value_size); + +extern int prom_pathtoinode(char *path); +extern int prom_inst2pkg(int); + +/* Dorking with Bus ranges... */ + +/* Apply promlib probes OBIO ranges to registers. */ +extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs); + +/* Apply ranges of any prom node (and optionally parent node as well) to registers. */ +extern void prom_apply_generic_ranges(int node, int parent, + struct linux_prom_registers *sbusregs, int nregs); + +/* CPU probing helpers. */ +int cpu_find_by_instance(int instance, int *prom_node, int *mid); +int cpu_find_by_mid(int mid, int *prom_node); +int cpu_get_hwmid(int prom_node); + +extern spinlock_t prom_lock; + +#endif /* !(__SPARC_OPLIB_H) */ diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h new file mode 100644 index 00000000000..6d2c2ca9803 --- /dev/null +++ b/arch/sparc/include/asm/oplib_64.h @@ -0,0 +1,322 @@ +/* oplib.h: Describes the interface and available routines in the + * Linux Prom library. + * + * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net) + * Copyright (C) 1996 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ + +#ifndef __SPARC64_OPLIB_H +#define __SPARC64_OPLIB_H + +#include <asm/openprom.h> + +/* OBP version string. */ +extern char prom_version[]; + +/* Root node of the prom device tree, this stays constant after + * initialization is complete. + */ +extern int prom_root_node; + +/* PROM stdin and stdout */ +extern int prom_stdin, prom_stdout; + +/* /chosen node of the prom device tree, this stays constant after + * initialization is complete. + */ +extern int prom_chosen_node; + +/* Helper values and strings in arch/sparc64/kernel/head.S */ +extern const char prom_peer_name[]; +extern const char prom_compatible_name[]; +extern const char prom_root_compatible[]; +extern const char prom_cpu_compatible[]; +extern const char prom_finddev_name[]; +extern const char prom_chosen_path[]; +extern const char prom_cpu_path[]; +extern const char prom_getprop_name[]; +extern const char prom_mmu_name[]; +extern const char prom_callmethod_name[]; +extern const char prom_translate_name[]; +extern const char prom_map_name[]; +extern const char prom_unmap_name[]; +extern int prom_mmu_ihandle_cache; +extern unsigned int prom_boot_mapped_pc; +extern unsigned int prom_boot_mapping_mode; +extern unsigned long prom_boot_mapping_phys_high, prom_boot_mapping_phys_low; + +struct linux_mlist_p1275 { + struct linux_mlist_p1275 *theres_more; + unsigned long start_adr; + unsigned long num_bytes; +}; + +struct linux_mem_p1275 { + struct linux_mlist_p1275 **p1275_totphys; + struct linux_mlist_p1275 **p1275_prommap; + struct linux_mlist_p1275 **p1275_available; /* What we can use */ +}; + +/* The functions... */ + +/* You must call prom_init() before using any of the library services, + * preferably as early as possible. Pass it the romvec pointer. + */ +extern void prom_init(void *cif_handler, void *cif_stack); + +/* Boot argument acquisition, returns the boot command line string. */ +extern char *prom_getbootargs(void); + +/* Device utilities. */ + +/* Device operations. */ + +/* Open the device described by the passed string. Note, that the format + * of the string is different on V0 vs. V2->higher proms. The caller must + * know what he/she is doing! Returns the device descriptor, an int. + */ +extern int prom_devopen(const char *device_string); + +/* Close a previously opened device described by the passed integer + * descriptor. + */ +extern int prom_devclose(int device_handle); + +/* Do a seek operation on the device described by the passed integer + * descriptor. + */ +extern void prom_seek(int device_handle, unsigned int seek_hival, + unsigned int seek_lowval); + +/* Miscellaneous routines, don't really fit in any category per se. */ + +/* Reboot the machine with the command line passed. */ +extern void prom_reboot(const char *boot_command); + +/* Evaluate the forth string passed. */ +extern void prom_feval(const char *forth_string); + +/* Enter the prom, with possibility of continuation with the 'go' + * command in newer proms. + */ +extern void prom_cmdline(void); + +/* Enter the prom, with no chance of continuation for the stand-alone + * which calls this. + */ +extern void prom_halt(void) __attribute__ ((noreturn)); + +/* Halt and power-off the machine. */ +extern void prom_halt_power_off(void) __attribute__ ((noreturn)); + +/* Set the PROM 'sync' callback function to the passed function pointer. + * When the user gives the 'sync' command at the prom prompt while the + * kernel is still active, the prom will call this routine. + * + */ +typedef int (*callback_func_t)(long *cmd); +extern void prom_setcallback(callback_func_t func_ptr); + +/* Acquire the IDPROM of the root node in the prom device tree. This + * gets passed a buffer where you would like it stuffed. The return value + * is the format type of this idprom or 0xff on error. + */ +extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size); + +/* Character operations to/from the console.... */ + +/* Non-blocking get character from console. */ +extern int prom_nbgetchar(void); + +/* Non-blocking put character to console. */ +extern int prom_nbputchar(char character); + +/* Blocking get character from console. */ +extern char prom_getchar(void); + +/* Blocking put character to console. */ +extern void prom_putchar(char character); + +/* Prom's internal routines, don't use in kernel/boot code. */ +extern void prom_printf(const char *fmt, ...); +extern void prom_write(const char *buf, unsigned int len); + +/* Multiprocessor operations... */ +#ifdef CONFIG_SMP +/* Start the CPU with the given device tree node at the passed program + * counter with the given arg passed in via register %o0. + */ +extern void prom_startcpu(int cpunode, unsigned long pc, unsigned long arg); + +/* Start the CPU with the given cpu ID at the passed program + * counter with the given arg passed in via register %o0. + */ +extern void prom_startcpu_cpuid(int cpuid, unsigned long pc, unsigned long arg); + +/* Stop the CPU with the given cpu ID. */ +extern void prom_stopcpu_cpuid(int cpuid); + +/* Stop the current CPU. */ +extern void prom_stopself(void); + +/* Idle the current CPU. */ +extern void prom_idleself(void); + +/* Resume the CPU with the passed device tree node. */ +extern void prom_resumecpu(int cpunode); +#endif + +/* Power management interfaces. */ + +/* Put the current CPU to sleep. */ +extern void prom_sleepself(void); + +/* Put the entire system to sleep. */ +extern int prom_sleepsystem(void); + +/* Initiate a wakeup event. */ +extern int prom_wakeupsystem(void); + +/* MMU and memory related OBP interfaces. */ + +/* Get unique string identifying SIMM at given physical address. */ +extern int prom_getunumber(int syndrome_code, + unsigned long phys_addr, + char *buf, int buflen); + +/* Retain physical memory to the caller across soft resets. */ +extern unsigned long prom_retain(const char *name, + unsigned long pa_low, unsigned long pa_high, + long size, long align); + +/* Load explicit I/D TLB entries into the calling processor. */ +extern long prom_itlb_load(unsigned long index, + unsigned long tte_data, + unsigned long vaddr); + +extern long prom_dtlb_load(unsigned long index, + unsigned long tte_data, + unsigned long vaddr); + +/* Map/Unmap client program address ranges. First the format of + * the mapping mode argument. + */ +#define PROM_MAP_WRITE 0x0001 /* Writable */ +#define PROM_MAP_READ 0x0002 /* Readable - sw */ +#define PROM_MAP_EXEC 0x0004 /* Executable - sw */ +#define PROM_MAP_LOCKED 0x0010 /* Locked, use i/dtlb load calls for this instead */ +#define PROM_MAP_CACHED 0x0020 /* Cacheable in both L1 and L2 caches */ +#define PROM_MAP_SE 0x0040 /* Side-Effects */ +#define PROM_MAP_GLOB 0x0080 /* Global */ +#define PROM_MAP_IE 0x0100 /* Invert-Endianness */ +#define PROM_MAP_DEFAULT (PROM_MAP_WRITE | PROM_MAP_READ | PROM_MAP_EXEC | PROM_MAP_CACHED) + +extern int prom_map(int mode, unsigned long size, + unsigned long vaddr, unsigned long paddr); +extern void prom_unmap(unsigned long size, unsigned long vaddr); + + +/* PROM device tree traversal functions... */ + +#ifdef PROMLIB_INTERNAL + +/* Internal version of prom_getchild. */ +extern int __prom_getchild(int parent_node); + +/* Internal version of prom_getsibling. */ +extern int __prom_getsibling(int node); + +#endif + +/* Get the child node of the given node, or zero if no child exists. */ +extern int prom_getchild(int parent_node); + +/* Get the next sibling node of the given node, or zero if no further + * siblings exist. + */ +extern int prom_getsibling(int node); + +/* Get the length, at the passed node, of the given property type. + * Returns -1 on error (ie. no such property at this node). + */ +extern int prom_getproplen(int thisnode, const char *property); + +/* Fetch the requested property using the given buffer. Returns + * the number of bytes the prom put into your buffer or -1 on error. + */ +extern int prom_getproperty(int thisnode, const char *property, + char *prop_buffer, int propbuf_size); + +/* Acquire an integer property. */ +extern int prom_getint(int node, const char *property); + +/* Acquire an integer property, with a default value. */ +extern int prom_getintdefault(int node, const char *property, int defval); + +/* Acquire a boolean property, 0=FALSE 1=TRUE. */ +extern int prom_getbool(int node, const char *prop); + +/* Acquire a string property, null string on error. */ +extern void prom_getstring(int node, const char *prop, char *buf, int bufsize); + +/* Does the passed node have the given "name"? YES=1 NO=0 */ +extern int prom_nodematch(int thisnode, const char *name); + +/* Search all siblings starting at the passed node for "name" matching + * the given string. Returns the node on success, zero on failure. + */ +extern int prom_searchsiblings(int node_start, const char *name); + +/* Return the first property type, as a string, for the given node. + * Returns a null string on error. Buffer should be at least 32B long. + */ +extern char *prom_firstprop(int node, char *buffer); + +/* Returns the next property after the passed property for the given + * node. Returns null string on failure. Buffer should be at least 32B long. + */ +extern char *prom_nextprop(int node, const char *prev_property, char *buffer); + +/* Returns 1 if the specified node has given property. */ +extern int prom_node_has_property(int node, const char *property); + +/* Returns phandle of the path specified */ +extern int prom_finddevice(const char *name); + +/* Set the indicated property at the given node with the passed value. + * Returns the number of bytes of your value that the prom took. + */ +extern int prom_setprop(int node, const char *prop_name, char *prop_value, + int value_size); + +extern int prom_pathtoinode(const char *path); +extern int prom_inst2pkg(int); +extern int prom_service_exists(const char *service_name); +extern void prom_sun4v_guest_soft_state(void); + +extern int prom_ihandle2path(int handle, char *buffer, int bufsize); + +/* Client interface level routines. */ +extern long p1275_cmd(const char *, long, ...); + +#if 0 +#define P1275_SIZE(x) ((((long)((x) / 32)) << 32) | (x)) +#else +#define P1275_SIZE(x) x +#endif + +/* We support at most 16 input and 1 output argument */ +#define P1275_ARG_NUMBER 0 +#define P1275_ARG_IN_STRING 1 +#define P1275_ARG_OUT_BUF 2 +#define P1275_ARG_OUT_32B 3 +#define P1275_ARG_IN_FUNCTION 4 +#define P1275_ARG_IN_BUF 5 +#define P1275_ARG_IN_64B 6 + +#define P1275_IN(x) ((x) & 0xf) +#define P1275_OUT(x) (((x) << 4) & 0xf0) +#define P1275_INOUT(i,o) (P1275_IN(i)|P1275_OUT(o)) +#define P1275_ARG(n,x) ((x) << ((n)*3 + 8)) + +#endif /* !(__SPARC64_OPLIB_H) */ diff --git a/arch/sparc/include/asm/page.h b/arch/sparc/include/asm/page.h new file mode 100644 index 00000000000..f21de034902 --- /dev/null +++ b/arch/sparc/include/asm/page.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_PAGE_H +#define ___ASM_SPARC_PAGE_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/page_64.h> +#else +#include <asm/page_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/page_32.h b/arch/sparc/include/asm/page_32.h new file mode 100644 index 00000000000..cf5fb70ca1c --- /dev/null +++ b/arch/sparc/include/asm/page_32.h @@ -0,0 +1,160 @@ +/* + * page.h: Various defines and such for MMU operations on the Sparc for + * the Linux kernel. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_PAGE_H +#define _SPARC_PAGE_H + +#ifdef CONFIG_SUN4 +#define PAGE_SHIFT 13 +#else +#define PAGE_SHIFT 12 +#endif +#ifndef __ASSEMBLY__ +/* I have my suspicions... -DaveM */ +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#else +#define PAGE_SIZE (1 << PAGE_SHIFT) +#endif +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#include <asm/btfixup.h> + +#ifndef __ASSEMBLY__ + +#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((void *)(to), (void *)(from), PAGE_SIZE) +#define clear_user_page(addr, vaddr, page) \ + do { clear_page(addr); \ + sparc_flush_page_to_ram(page); \ + } while (0) +#define copy_user_page(to, from, vaddr, page) \ + do { copy_page(to, from); \ + sparc_flush_page_to_ram(page); \ + } while (0) + +/* The following structure is used to hold the physical + * memory configuration of the machine. This is filled in + * prom_meminit() and is later used by mem_init() to set up + * mem_map[]. We statically allocate SPARC_PHYS_BANKS+1 of + * these structs, this is arbitrary. The entry after the + * last valid one has num_bytes==0. + */ +struct sparc_phys_banks { + unsigned long base_addr; + unsigned long num_bytes; +}; + +#define SPARC_PHYS_BANKS 32 + +extern struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS+1]; + +/* Cache alias structure. Entry is valid if context != -1. */ +struct cache_palias { + unsigned long vaddr; + int context; +}; + +/* passing structs on the Sparc slow us down tremendously... */ + +/* #define STRICT_MM_TYPECHECKS */ + +#ifdef STRICT_MM_TYPECHECKS +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long iopte; } iopte_t; +typedef struct { unsigned long pmdv[16]; } pmd_t; +typedef struct { unsigned long pgd; } pgd_t; +typedef struct { unsigned long ctxd; } ctxd_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct { unsigned long iopgprot; } iopgprot_t; + +#define pte_val(x) ((x).pte) +#define iopte_val(x) ((x).iopte) +#define pmd_val(x) ((x).pmdv[0]) +#define pgd_val(x) ((x).pgd) +#define ctxd_val(x) ((x).ctxd) +#define pgprot_val(x) ((x).pgprot) +#define iopgprot_val(x) ((x).iopgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __iopte(x) ((iopte_t) { (x) } ) +/* #define __pmd(x) ((pmd_t) { (x) } ) */ /* XXX procedure with loop */ +#define __pgd(x) ((pgd_t) { (x) } ) +#define __ctxd(x) ((ctxd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) +#define __iopgprot(x) ((iopgprot_t) { (x) } ) + +#else +/* + * .. while these make it easier on the compiler + */ +typedef unsigned long pte_t; +typedef unsigned long iopte_t; +typedef struct { unsigned long pmdv[16]; } pmd_t; +typedef unsigned long pgd_t; +typedef unsigned long ctxd_t; +typedef unsigned long pgprot_t; +typedef unsigned long iopgprot_t; + +#define pte_val(x) (x) +#define iopte_val(x) (x) +#define pmd_val(x) ((x).pmdv[0]) +#define pgd_val(x) (x) +#define ctxd_val(x) (x) +#define pgprot_val(x) (x) +#define iopgprot_val(x) (x) + +#define __pte(x) (x) +#define __iopte(x) (x) +/* #define __pmd(x) (x) */ /* XXX later */ +#define __pgd(x) (x) +#define __ctxd(x) (x) +#define __pgprot(x) (x) +#define __iopgprot(x) (x) + +#endif + +typedef struct page *pgtable_t; + +extern unsigned long sparc_unmapped_base; + +BTFIXUPDEF_SETHI(sparc_unmapped_base) + +#define TASK_UNMAPPED_BASE BTFIXUP_SETHI(sparc_unmapped_base) + +#else /* !(__ASSEMBLY__) */ + +#define __pgprot(x) (x) + +#endif /* !(__ASSEMBLY__) */ + +#define PAGE_OFFSET 0xf0000000 +#ifndef __ASSEMBLY__ +extern unsigned long phys_base; +extern unsigned long pfn_base; +#endif +#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + phys_base) +#define __va(x) ((void *)((unsigned long) (x) - phys_base + PAGE_OFFSET)) + +#define virt_to_phys __pa +#define phys_to_virt __va + +#define ARCH_PFN_OFFSET (pfn_base) +#define virt_to_page(kaddr) (mem_map + ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT))) + +#define pfn_valid(pfn) (((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr)) +#define virt_addr_valid(kaddr) ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr) + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#include <asm-generic/memory_model.h> +#include <asm-generic/page.h> + +#endif /* _SPARC_PAGE_H */ diff --git a/arch/sparc/include/asm/page_64.h b/arch/sparc/include/asm/page_64.h new file mode 100644 index 00000000000..b579b910ef5 --- /dev/null +++ b/arch/sparc/include/asm/page_64.h @@ -0,0 +1,135 @@ +#ifndef _SPARC64_PAGE_H +#define _SPARC64_PAGE_H + +#include <linux/const.h> + +#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB) +#define PAGE_SHIFT 13 +#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB) +#define PAGE_SHIFT 16 +#else +#error No page size specified in kernel configuration +#endif + +#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +/* Flushing for D-cache alias handling is only needed if + * the page size is smaller than 16K. + */ +#if PAGE_SHIFT < 14 +#define DCACHE_ALIASING_POSSIBLE +#endif + +#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) +#define HPAGE_SHIFT 22 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K) +#define HPAGE_SHIFT 19 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +#define HPAGE_SHIFT 16 +#endif + +#ifdef CONFIG_HUGETLB_PAGE +#define HPAGE_SIZE (_AC(1,UL) << HPAGE_SHIFT) +#define HPAGE_MASK (~(HPAGE_SIZE - 1UL)) +#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) +#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA +#endif + +#ifndef __ASSEMBLY__ + +extern void _clear_page(void *page); +#define clear_page(X) _clear_page((void *)(X)) +struct page; +extern void clear_user_page(void *addr, unsigned long vaddr, struct page *page); +#define copy_page(X,Y) memcpy((void *)(X), (void *)(Y), PAGE_SIZE) +extern void copy_user_page(void *to, void *from, unsigned long vaddr, struct page *topage); + +/* Unlike sparc32, sparc64's parameter passing API is more + * sane in that structures which as small enough are passed + * in registers instead of on the stack. Thus, setting + * STRICT_MM_TYPECHECKS does not generate worse code so + * let's enable it to get the type checking. + */ + +#define STRICT_MM_TYPECHECKS + +#ifdef STRICT_MM_TYPECHECKS +/* These are used to make use of C type-checking.. */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long iopte; } iopte_t; +typedef struct { unsigned int pmd; } pmd_t; +typedef struct { unsigned int pgd; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; + +#define pte_val(x) ((x).pte) +#define iopte_val(x) ((x).iopte) +#define pmd_val(x) ((x).pmd) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __iopte(x) ((iopte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +#else +/* .. while these make it easier on the compiler */ +typedef unsigned long pte_t; +typedef unsigned long iopte_t; +typedef unsigned int pmd_t; +typedef unsigned int pgd_t; +typedef unsigned long pgprot_t; + +#define pte_val(x) (x) +#define iopte_val(x) (x) +#define pmd_val(x) (x) +#define pgd_val(x) (x) +#define pgprot_val(x) (x) + +#define __pte(x) (x) +#define __iopte(x) (x) +#define __pmd(x) (x) +#define __pgd(x) (x) +#define __pgprot(x) (x) + +#endif /* (STRICT_MM_TYPECHECKS) */ + +typedef struct page *pgtable_t; + +#define TASK_UNMAPPED_BASE (test_thread_flag(TIF_32BIT) ? \ + (_AC(0x0000000070000000,UL)) : \ + (_AC(0xfffff80000000000,UL) + (1UL << 32UL))) + +#include <asm-generic/memory_model.h> + +#endif /* !(__ASSEMBLY__) */ + +/* We used to stick this into a hard-coded global register (%g4) + * but that does not make sense anymore. + */ +#define PAGE_OFFSET _AC(0xFFFFF80000000000,UL) + +#ifndef __ASSEMBLY__ + +#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET) +#define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET)) + +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) + +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr)>>PAGE_SHIFT) + +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) + +#define virt_to_phys __pa +#define phys_to_virt __va + +#endif /* !(__ASSEMBLY__) */ + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#include <asm-generic/page.h> + +#endif /* _SPARC64_PAGE_H */ diff --git a/arch/sparc/include/asm/param.h b/arch/sparc/include/asm/param.h new file mode 100644 index 00000000000..9836d9a3cb9 --- /dev/null +++ b/arch/sparc/include/asm/param.h @@ -0,0 +1,22 @@ +#ifndef _ASMSPARC_PARAM_H +#define _ASMSPARC_PARAM_H + +#ifdef __KERNEL__ +# define HZ CONFIG_HZ /* Internal kernel timer frequency */ +# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 8192 /* Thanks for sun4's we carry baggage... */ + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h new file mode 100644 index 00000000000..7818b2523b8 --- /dev/null +++ b/arch/sparc/include/asm/parport.h @@ -0,0 +1,246 @@ +/* parport.h: sparc64 specific parport initialization and dma. + * + * Copyright (C) 1999 Eddie C. Dost (ecd@skynet.be) + */ + +#ifndef _ASM_SPARC64_PARPORT_H +#define _ASM_SPARC64_PARPORT_H 1 + +#include <asm/ebus.h> +#include <asm/ns87303.h> +#include <asm/of_device.h> +#include <asm/prom.h> + +#define PARPORT_PC_MAX_PORTS PARPORT_MAX + +/* + * While sparc64 doesn't have an ISA DMA API, we provide something that looks + * close enough to make parport_pc happy + */ +#define HAS_DMA + +static DEFINE_SPINLOCK(dma_spin_lock); + +#define claim_dma_lock() \ +({ unsigned long flags; \ + spin_lock_irqsave(&dma_spin_lock, flags); \ + flags; \ +}) + +#define release_dma_lock(__flags) \ + spin_unlock_irqrestore(&dma_spin_lock, __flags); + +static struct sparc_ebus_info { + struct ebus_dma_info info; + unsigned int addr; + unsigned int count; + int lock; + + struct parport *port; +} sparc_ebus_dmas[PARPORT_PC_MAX_PORTS]; + +static DECLARE_BITMAP(dma_slot_map, PARPORT_PC_MAX_PORTS); + +static inline int request_dma(unsigned int dmanr, const char *device_id) +{ + if (dmanr >= PARPORT_PC_MAX_PORTS) + return -EINVAL; + if (xchg(&sparc_ebus_dmas[dmanr].lock, 1) != 0) + return -EBUSY; + return 0; +} + +static inline void free_dma(unsigned int dmanr) +{ + if (dmanr >= PARPORT_PC_MAX_PORTS) { + printk(KERN_WARNING "Trying to free DMA%d\n", dmanr); + return; + } + if (xchg(&sparc_ebus_dmas[dmanr].lock, 0) == 0) { + printk(KERN_WARNING "Trying to free free DMA%d\n", dmanr); + return; + } +} + +static inline void enable_dma(unsigned int dmanr) +{ + ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 1); + + if (ebus_dma_request(&sparc_ebus_dmas[dmanr].info, + sparc_ebus_dmas[dmanr].addr, + sparc_ebus_dmas[dmanr].count)) + BUG(); +} + +static inline void disable_dma(unsigned int dmanr) +{ + ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 0); +} + +static inline void clear_dma_ff(unsigned int dmanr) +{ + /* nothing */ +} + +static inline void set_dma_mode(unsigned int dmanr, char mode) +{ + ebus_dma_prepare(&sparc_ebus_dmas[dmanr].info, (mode != DMA_MODE_WRITE)); +} + +static inline void set_dma_addr(unsigned int dmanr, unsigned int addr) +{ + sparc_ebus_dmas[dmanr].addr = addr; +} + +static inline void set_dma_count(unsigned int dmanr, unsigned int count) +{ + sparc_ebus_dmas[dmanr].count = count; +} + +static inline unsigned int get_dma_residue(unsigned int dmanr) +{ + return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info); +} + +static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id *match) +{ + unsigned long base = op->resource[0].start; + unsigned long config = op->resource[1].start; + unsigned long d_base = op->resource[2].start; + unsigned long d_len; + struct device_node *parent; + struct parport *p; + int slot, err; + + parent = op->node->parent; + if (!strcmp(parent->name, "dma")) { + p = parport_pc_probe_port(base, base + 0x400, + op->irqs[0], PARPORT_DMA_NOFIFO, + op->dev.parent->parent); + if (!p) + return -ENOMEM; + dev_set_drvdata(&op->dev, p); + return 0; + } + + for (slot = 0; slot < PARPORT_PC_MAX_PORTS; slot++) { + if (!test_and_set_bit(slot, dma_slot_map)) + break; + } + err = -ENODEV; + if (slot >= PARPORT_PC_MAX_PORTS) + goto out_err; + + spin_lock_init(&sparc_ebus_dmas[slot].info.lock); + + d_len = (op->resource[2].end - d_base) + 1UL; + sparc_ebus_dmas[slot].info.regs = + of_ioremap(&op->resource[2], 0, d_len, "ECPP DMA"); + + if (!sparc_ebus_dmas[slot].info.regs) + goto out_clear_map; + + sparc_ebus_dmas[slot].info.flags = 0; + sparc_ebus_dmas[slot].info.callback = NULL; + sparc_ebus_dmas[slot].info.client_cookie = NULL; + sparc_ebus_dmas[slot].info.irq = 0xdeadbeef; + strcpy(sparc_ebus_dmas[slot].info.name, "parport"); + if (ebus_dma_register(&sparc_ebus_dmas[slot].info)) + goto out_unmap_regs; + + ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 1); + + /* Configure IRQ to Push Pull, Level Low */ + /* Enable ECP, set bit 2 of the CTR first */ + outb(0x04, base + 0x02); + ns87303_modify(config, PCR, + PCR_EPP_ENABLE | + PCR_IRQ_ODRAIN, + PCR_ECP_ENABLE | + PCR_ECP_CLK_ENA | + PCR_IRQ_POLAR); + + /* CTR bit 5 controls direction of port */ + ns87303_modify(config, PTR, + 0, PTR_LPT_REG_DIR); + + p = parport_pc_probe_port(base, base + 0x400, + op->irqs[0], + slot, + op->dev.parent); + err = -ENOMEM; + if (!p) + goto out_disable_irq; + + dev_set_drvdata(&op->dev, p); + + return 0; + +out_disable_irq: + ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0); + ebus_dma_unregister(&sparc_ebus_dmas[slot].info); + +out_unmap_regs: + of_iounmap(&op->resource[2], sparc_ebus_dmas[slot].info.regs, d_len); + +out_clear_map: + clear_bit(slot, dma_slot_map); + +out_err: + return err; +} + +static int __devexit ecpp_remove(struct of_device *op) +{ + struct parport *p = dev_get_drvdata(&op->dev); + int slot = p->dma; + + parport_pc_unregister_port(p); + + if (slot != PARPORT_DMA_NOFIFO) { + unsigned long d_base = op->resource[2].start; + unsigned long d_len; + + d_len = (op->resource[2].end - d_base) + 1UL; + + ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0); + ebus_dma_unregister(&sparc_ebus_dmas[slot].info); + of_iounmap(&op->resource[2], + sparc_ebus_dmas[slot].info.regs, + d_len); + clear_bit(slot, dma_slot_map); + } + + return 0; +} + +static struct of_device_id ecpp_match[] = { + { + .name = "ecpp", + }, + { + .name = "parallel", + .compatible = "ecpp", + }, + { + .name = "parallel", + .compatible = "ns87317-ecpp", + }, + {}, +}; + +static struct of_platform_driver ecpp_driver = { + .name = "ecpp", + .match_table = ecpp_match, + .probe = ecpp_probe, + .remove = __devexit_p(ecpp_remove), +}; + +static int parport_pc_find_nonpci_ports(int autoirq, int autodma) +{ + of_register_driver(&ecpp_driver, &of_bus_type); + + return 0; +} + +#endif /* !(_ASM_SPARC64_PARPORT_H */ diff --git a/arch/sparc/include/asm/pbm.h b/arch/sparc/include/asm/pbm.h new file mode 100644 index 00000000000..458a4916d14 --- /dev/null +++ b/arch/sparc/include/asm/pbm.h @@ -0,0 +1,47 @@ +/* + * + * pbm.h: PCI bus module pseudo driver software state + * Adopted from sparc64 by V. Roganov and G. Raiko + * + * Original header: + * pbm.h: U2P PCI bus module pseudo driver software state. + * + * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) + * + * To put things into perspective, consider sparc64 with a few PCI controllers. + * Each type would have an own structure, with instances related one to one. + * We have only pcic on sparc, but we want to be compatible with sparc64 pbm.h. + * All three represent different abstractions. + * pci_bus - Linux PCI subsystem view of a PCI bus (including bridged buses) + * pbm - Arch-specific view of a PCI bus (sparc or sparc64) + * pcic - Chip-specific information for PCIC. + */ + +#ifndef __SPARC_PBM_H +#define __SPARC_PBM_H + +#include <linux/pci.h> +#include <asm/oplib.h> +#include <asm/prom.h> + +struct linux_pbm_info { + int prom_node; + char prom_name[64]; + /* struct linux_prom_pci_ranges pbm_ranges[PROMREG_MAX]; */ + /* int num_pbm_ranges; */ + + /* Now things for the actual PCI bus probes. */ + unsigned int pci_first_busno; /* Can it be nonzero? */ + struct pci_bus *pci_bus; /* Was inline, MJ allocs now */ +}; + +/* PCI devices which are not bridges have this placed in their pci_dev + * sysdata member. This makes OBP aware PCI device drivers easier to + * code. + */ +struct pcidev_cookie { + struct linux_pbm_info *pbm; + struct device_node *prom_node; +}; + +#endif /* !(__SPARC_PBM_H) */ diff --git a/arch/sparc/include/asm/pci.h b/arch/sparc/include/asm/pci.h new file mode 100644 index 00000000000..6e14fd17933 --- /dev/null +++ b/arch/sparc/include/asm/pci.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_PCI_H +#define ___ASM_SPARC_PCI_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/pci_64.h> +#else +#include <asm/pci_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h new file mode 100644 index 00000000000..0ee949d220c --- /dev/null +++ b/arch/sparc/include/asm/pci_32.h @@ -0,0 +1,171 @@ +#ifndef __SPARC_PCI_H +#define __SPARC_PCI_H + +#ifdef __KERNEL__ + +/* Can be used to override the logic in pci_scan_bus for skipping + * already-configured bus numbers - to be used for buggy BIOSes + * or architectures with incomplete PCI setup by the loader. + */ +#define pcibios_assign_all_busses() 0 +#define pcibios_scan_all_fns(a, b) 0 + +#define PCIBIOS_MIN_IO 0UL +#define PCIBIOS_MIN_MEM 0UL + +#define PCI_IRQ_NONE 0xffffffff + +static inline void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} + +static inline void pcibios_penalize_isa_irq(int irq, int active) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +/* Dynamic DMA mapping stuff. + */ +#define PCI_DMA_BUS_IS_PHYS (0) + +#include <asm/scatterlist.h> + +struct pci_dev; + +/* Allocate and map kernel buffer using consistent mode DMA for a device. + * hwdev should be valid struct pci_dev pointer for PCI devices. + */ +extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle); + +/* Free and unmap a consistent DMA buffer. + * cpu_addr is what was returned from pci_alloc_consistent, + * size must be the same as what as passed into pci_alloc_consistent, + * and likewise dma_addr must be the same as what *dma_addrp was set to. + * + * References to the memory and mappings assosciated with cpu_addr/dma_addr + * past this call are illegal. + */ +extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle); + +/* Map a single buffer of the indicated size for DMA in streaming mode. + * The 32-bit bus address to use is returned. + * + * Once the device is given the dma address, the device owns this memory + * until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed. + */ +extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction); + +/* Unmap a single streaming mode DMA translation. The dma_addr and size + * must match what was provided for in a previous pci_map_single call. All + * other usages are undefined. + * + * After this call, reads by the cpu to the buffer are guaranteed to see + * whatever the device wrote there. + */ +extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction); + +/* pci_unmap_{single,page} is not a nop, thus... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ + dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ + __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) \ + ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) \ + ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + (((PTR)->LEN_NAME) = (VAL)) + +/* + * Same as above, only with pages instead of mapped addresses. + */ +extern dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page, + unsigned long offset, size_t size, int direction); +extern void pci_unmap_page(struct pci_dev *hwdev, + dma_addr_t dma_address, size_t size, int direction); + +/* Map a set of buffers described by scatterlist in streaming + * mode for DMA. This is the scather-gather version of the + * above pci_map_single interface. Here the scatter gather list + * elements are each tagged with the appropriate dma address + * and length. They are obtained via sg_dma_{address,length}(SG). + * + * NOTE: An implementation may be able to use a smaller number of + * DMA address/length pairs than there are SG table elements. + * (for example via virtual mapping capabilities) + * The routine returns the number of addr/length pairs actually + * used, at most nents. + * + * Device ownership issues as mentioned above for pci_map_single are + * the same here. + */ +extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction); + +/* Unmap a set of streaming mode DMA translations. + * Again, cpu read rules concerning calls here are the same as for + * pci_unmap_single() above. + */ +extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nhwents, int direction); + +/* Make physical memory consistent for a single + * streaming mode DMA translation after a transfer. + * + * If you perform a pci_map_single() but wish to interrogate the + * buffer using the cpu, yet do not wish to teardown the PCI dma + * mapping, you must call this function before doing so. At the + * next point you give the PCI dma address back to the card, you + * must first perform a pci_dma_sync_for_device, and then the device + * again owns the buffer. + */ +extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction); +extern void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction); + +/* Make physical memory consistent for a set of streaming + * mode DMA translations after a transfer. + * + * The same as pci_dma_sync_single_* but for a scatter-gather list, + * same rules and usage. + */ +extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction); +extern void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction); + +/* Return whether the given PCI device DMA address mask can + * be supported properly. For example, if your device can + * only drive the low 24-bits during PCI bus mastering, then + * you would pass 0x00ffffff as the mask to this function. + */ +static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask) +{ + return 1; +} + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + *strat = PCI_DMA_BURST_INFINITY; + *strategy_parameter = ~0UL; +} +#endif + +#define PCI_DMA_ERROR_CODE (~(dma_addr_t)0x0) + +static inline int pci_dma_mapping_error(struct pci_dev *pdev, + dma_addr_t dma_addr) +{ + return (dma_addr == PCI_DMA_ERROR_CODE); +} + +struct device_node; +extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev); + +#endif /* __KERNEL__ */ + +/* generic pci stuff */ +#include <asm-generic/pci.h> + +#endif /* __SPARC_PCI_H */ diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h new file mode 100644 index 00000000000..4f79a54948f --- /dev/null +++ b/arch/sparc/include/asm/pci_64.h @@ -0,0 +1,210 @@ +#ifndef __SPARC64_PCI_H +#define __SPARC64_PCI_H + +#ifdef __KERNEL__ + +#include <linux/dma-mapping.h> + +/* Can be used to override the logic in pci_scan_bus for skipping + * already-configured bus numbers - to be used for buggy BIOSes + * or architectures with incomplete PCI setup by the loader. + */ +#define pcibios_assign_all_busses() 0 +#define pcibios_scan_all_fns(a, b) 0 + +#define PCIBIOS_MIN_IO 0UL +#define PCIBIOS_MIN_MEM 0UL + +#define PCI_IRQ_NONE 0xffffffff + +#define PCI_CACHE_LINE_BYTES 64 + +static inline void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} + +static inline void pcibios_penalize_isa_irq(int irq, int active) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +/* The PCI address space does not equal the physical memory + * address space. The networking and block device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (0) + +static inline void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, + dma_addr_t *dma_handle) +{ + return dma_alloc_coherent(&pdev->dev, size, dma_handle, GFP_ATOMIC); +} + +static inline void pci_free_consistent(struct pci_dev *pdev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + return dma_free_coherent(&pdev->dev, size, vaddr, dma_handle); +} + +static inline dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr, + size_t size, int direction) +{ + return dma_map_single(&pdev->dev, ptr, size, + (enum dma_data_direction) direction); +} + +static inline void pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr, + size_t size, int direction) +{ + dma_unmap_single(&pdev->dev, dma_addr, size, + (enum dma_data_direction) direction); +} + +#define pci_map_page(dev, page, off, size, dir) \ + pci_map_single(dev, (page_address(page) + (off)), size, dir) +#define pci_unmap_page(dev,addr,sz,dir) \ + pci_unmap_single(dev,addr,sz,dir) + +/* pci_unmap_{single,page} is not a nop, thus... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ + dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ + __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) \ + ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) \ + ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + (((PTR)->LEN_NAME) = (VAL)) + +static inline int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg, + int nents, int direction) +{ + return dma_map_sg(&pdev->dev, sg, nents, + (enum dma_data_direction) direction); +} + +static inline void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg, + int nents, int direction) +{ + dma_unmap_sg(&pdev->dev, sg, nents, + (enum dma_data_direction) direction); +} + +static inline void pci_dma_sync_single_for_cpu(struct pci_dev *pdev, + dma_addr_t dma_handle, + size_t size, int direction) +{ + dma_sync_single_for_cpu(&pdev->dev, dma_handle, size, + (enum dma_data_direction) direction); +} + +static inline void pci_dma_sync_single_for_device(struct pci_dev *pdev, + dma_addr_t dma_handle, + size_t size, int direction) +{ + /* No flushing needed to sync cpu writes to the device. */ +} + +static inline void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev, + struct scatterlist *sg, + int nents, int direction) +{ + dma_sync_sg_for_cpu(&pdev->dev, sg, nents, + (enum dma_data_direction) direction); +} + +static inline void pci_dma_sync_sg_for_device(struct pci_dev *pdev, + struct scatterlist *sg, + int nelems, int direction) +{ + /* No flushing needed to sync cpu writes to the device. */ +} + +/* Return whether the given PCI device DMA address mask can + * be supported properly. For example, if your device can + * only drive the low 24-bits during PCI bus mastering, then + * you would pass 0x00ffffff as the mask to this function. + */ +extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask); + +/* PCI IOMMU mapping bypass support. */ + +/* PCI 64-bit addressing works for all slots on all controller + * types on sparc64. However, it requires that the device + * can drive enough of the 64 bits. + */ +#define PCI64_REQUIRED_MASK (~(dma64_addr_t)0) +#define PCI64_ADDR_BASE 0xfffc000000000000UL + +static inline int pci_dma_mapping_error(struct pci_dev *pdev, + dma_addr_t dma_addr) +{ + return dma_mapping_error(&pdev->dev, dma_addr); +} + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + unsigned long cacheline_size; + u8 byte; + + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte); + if (byte == 0) + cacheline_size = 1024; + else + cacheline_size = (int) byte * 4; + + *strat = PCI_DMA_BURST_BOUNDARY; + *strategy_parameter = cacheline_size; +} +#endif + +/* Return the index of the PCI controller for device PDEV. */ + +extern int pci_domain_nr(struct pci_bus *bus); +static inline int pci_proc_domain(struct pci_bus *bus) +{ + return 1; +} + +/* Platform support for /proc/bus/pci/X/Y mmap()s. */ + +#define HAVE_PCI_MMAP +#define HAVE_ARCH_PCI_GET_UNMAPPED_AREA +#define get_pci_unmapped_area get_fb_unmapped_area + +extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, + int write_combine); + +extern void +pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res); + +extern void +pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region); + +extern struct resource *pcibios_select_root(struct pci_dev *, struct resource *); + +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return PCI_IRQ_NONE; +} + +struct device_node; +extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev); + +#define HAVE_ARCH_PCI_RESOURCE_TO_USER +extern void pci_resource_to_user(const struct pci_dev *dev, int bar, + const struct resource *rsrc, + resource_size_t *start, resource_size_t *end); +#endif /* __KERNEL__ */ + +#endif /* __SPARC64_PCI_H */ diff --git a/arch/sparc/include/asm/pcic.h b/arch/sparc/include/asm/pcic.h new file mode 100644 index 00000000000..f20ef562b26 --- /dev/null +++ b/arch/sparc/include/asm/pcic.h @@ -0,0 +1,123 @@ +/* + * pcic.h: JavaEngine 1 specific PCI definitions. + * + * Copyright (C) 1998 V. Roganov and G. Raiko + */ + +#ifndef __SPARC_PCIC_H +#define __SPARC_PCIC_H + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> +#include <linux/smp.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <asm/pbm.h> + +struct linux_pcic { + void __iomem *pcic_regs; + unsigned long pcic_io; + void __iomem *pcic_config_space_addr; + void __iomem *pcic_config_space_data; + struct resource pcic_res_regs; + struct resource pcic_res_io; + struct resource pcic_res_cfg_addr; + struct resource pcic_res_cfg_data; + struct linux_pbm_info pbm; + struct pcic_ca2irq *pcic_imap; + int pcic_imdim; +}; + +extern int pcic_probe(void); +/* Erm... MJ redefined pcibios_present() so that it does not work early. */ +extern int pcic_present(void); +extern void sun4m_pci_init_IRQ(void); + +#endif + +/* Size of PCI I/O space which we relocate. */ +#define PCI_SPACE_SIZE 0x1000000 /* 16 MB */ + +/* PCIC Register Set. */ +#define PCI_DIAGNOSTIC_0 0x40 /* 32 bits */ +#define PCI_SIZE_0 0x44 /* 32 bits */ +#define PCI_SIZE_1 0x48 /* 32 bits */ +#define PCI_SIZE_2 0x4c /* 32 bits */ +#define PCI_SIZE_3 0x50 /* 32 bits */ +#define PCI_SIZE_4 0x54 /* 32 bits */ +#define PCI_SIZE_5 0x58 /* 32 bits */ +#define PCI_PIO_CONTROL 0x60 /* 8 bits */ +#define PCI_DVMA_CONTROL 0x62 /* 8 bits */ +#define PCI_DVMA_CONTROL_INACTIVITY_REQ (1<<0) +#define PCI_DVMA_CONTROL_IOTLB_ENABLE (1<<0) +#define PCI_DVMA_CONTROL_IOTLB_DISABLE 0 +#define PCI_DVMA_CONTROL_INACTIVITY_ACK (1<<4) +#define PCI_INTERRUPT_CONTROL 0x63 /* 8 bits */ +#define PCI_CPU_INTERRUPT_PENDING 0x64 /* 32 bits */ +#define PCI_DIAGNOSTIC_1 0x68 /* 16 bits */ +#define PCI_SOFTWARE_INT_CLEAR 0x6a /* 16 bits */ +#define PCI_SOFTWARE_INT_SET 0x6e /* 16 bits */ +#define PCI_SYS_INT_PENDING 0x70 /* 32 bits */ +#define PCI_SYS_INT_PENDING_PIO 0x40000000 +#define PCI_SYS_INT_PENDING_DMA 0x20000000 +#define PCI_SYS_INT_PENDING_PCI 0x10000000 +#define PCI_SYS_INT_PENDING_APSR 0x08000000 +#define PCI_SYS_INT_TARGET_MASK 0x74 /* 32 bits */ +#define PCI_SYS_INT_TARGET_MASK_CLEAR 0x78 /* 32 bits */ +#define PCI_SYS_INT_TARGET_MASK_SET 0x7c /* 32 bits */ +#define PCI_SYS_INT_PENDING_CLEAR 0x83 /* 8 bits */ +#define PCI_SYS_INT_PENDING_CLEAR_ALL 0x80 +#define PCI_SYS_INT_PENDING_CLEAR_PIO 0x40 +#define PCI_SYS_INT_PENDING_CLEAR_DMA 0x20 +#define PCI_SYS_INT_PENDING_CLEAR_PCI 0x10 +#define PCI_IOTLB_CONTROL 0x84 /* 8 bits */ +#define PCI_INT_SELECT_LO 0x88 /* 16 bits */ +#define PCI_ARBITRATION_SELECT 0x8a /* 16 bits */ +#define PCI_INT_SELECT_HI 0x8c /* 16 bits */ +#define PCI_HW_INT_OUTPUT 0x8e /* 16 bits */ +#define PCI_IOTLB_RAM_INPUT 0x90 /* 32 bits */ +#define PCI_IOTLB_CAM_INPUT 0x94 /* 32 bits */ +#define PCI_IOTLB_RAM_OUTPUT 0x98 /* 32 bits */ +#define PCI_IOTLB_CAM_OUTPUT 0x9c /* 32 bits */ +#define PCI_SMBAR0 0xa0 /* 8 bits */ +#define PCI_MSIZE0 0xa1 /* 8 bits */ +#define PCI_PMBAR0 0xa2 /* 8 bits */ +#define PCI_SMBAR1 0xa4 /* 8 bits */ +#define PCI_MSIZE1 0xa5 /* 8 bits */ +#define PCI_PMBAR1 0xa6 /* 8 bits */ +#define PCI_SIBAR 0xa8 /* 8 bits */ +#define PCI_SIBAR_ADDRESS_MASK 0xf +#define PCI_ISIZE 0xa9 /* 8 bits */ +#define PCI_ISIZE_16M 0xf +#define PCI_ISIZE_32M 0xe +#define PCI_ISIZE_64M 0xc +#define PCI_ISIZE_128M 0x8 +#define PCI_ISIZE_256M 0x0 +#define PCI_PIBAR 0xaa /* 8 bits */ +#define PCI_CPU_COUNTER_LIMIT_HI 0xac /* 32 bits */ +#define PCI_CPU_COUNTER_LIMIT_LO 0xb0 /* 32 bits */ +#define PCI_CPU_COUNTER_LIMIT 0xb4 /* 32 bits */ +#define PCI_SYS_LIMIT 0xb8 /* 32 bits */ +#define PCI_SYS_COUNTER 0xbc /* 32 bits */ +#define PCI_SYS_COUNTER_OVERFLOW (1<<31) /* Limit reached */ +#define PCI_SYS_LIMIT_PSEUDO 0xc0 /* 32 bits */ +#define PCI_USER_TIMER_CONTROL 0xc4 /* 8 bits */ +#define PCI_USER_TIMER_CONFIG 0xc5 /* 8 bits */ +#define PCI_COUNTER_IRQ 0xc6 /* 8 bits */ +#define PCI_COUNTER_IRQ_SET(sys_irq, cpu_irq) ((((sys_irq) & 0xf) << 4) | \ + ((cpu_irq) & 0xf)) +#define PCI_COUNTER_IRQ_SYS(v) (((v) >> 4) & 0xf) +#define PCI_COUNTER_IRQ_CPU(v) ((v) & 0xf) +#define PCI_PIO_ERROR_COMMAND 0xc7 /* 8 bits */ +#define PCI_PIO_ERROR_ADDRESS 0xc8 /* 32 bits */ +#define PCI_IOTLB_ERROR_ADDRESS 0xcc /* 32 bits */ +#define PCI_SYS_STATUS 0xd0 /* 8 bits */ +#define PCI_SYS_STATUS_RESET_ENABLE (1<<0) +#define PCI_SYS_STATUS_RESET (1<<1) +#define PCI_SYS_STATUS_WATCHDOG_RESET (1<<4) +#define PCI_SYS_STATUS_PCI_RESET (1<<5) +#define PCI_SYS_STATUS_PCI_RESET_ENABLE (1<<6) +#define PCI_SYS_STATUS_PCI_SATTELITE_MODE (1<<7) + +#endif /* !(__SPARC_PCIC_H) */ diff --git a/arch/sparc/include/asm/percpu.h b/arch/sparc/include/asm/percpu.h new file mode 100644 index 00000000000..bfb1d19ff1b --- /dev/null +++ b/arch/sparc/include/asm/percpu.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_PERCPU_H +#define ___ASM_SPARC_PERCPU_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/percpu_64.h> +#else +#include <asm/percpu_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/percpu_32.h b/arch/sparc/include/asm/percpu_32.h new file mode 100644 index 00000000000..06066a7aaec --- /dev/null +++ b/arch/sparc/include/asm/percpu_32.h @@ -0,0 +1,6 @@ +#ifndef __ARCH_SPARC_PERCPU__ +#define __ARCH_SPARC_PERCPU__ + +#include <asm-generic/percpu.h> + +#endif /* __ARCH_SPARC_PERCPU__ */ diff --git a/arch/sparc/include/asm/percpu_64.h b/arch/sparc/include/asm/percpu_64.h new file mode 100644 index 00000000000..bee64593023 --- /dev/null +++ b/arch/sparc/include/asm/percpu_64.h @@ -0,0 +1,28 @@ +#ifndef __ARCH_SPARC64_PERCPU__ +#define __ARCH_SPARC64_PERCPU__ + +#include <linux/compiler.h> + +register unsigned long __local_per_cpu_offset asm("g5"); + +#ifdef CONFIG_SMP + +extern void real_setup_per_cpu_areas(void); + +extern unsigned long __per_cpu_base; +extern unsigned long __per_cpu_shift; +#define __per_cpu_offset(__cpu) \ + (__per_cpu_base + ((unsigned long)(__cpu) << __per_cpu_shift)) +#define per_cpu_offset(x) (__per_cpu_offset(x)) + +#define __my_cpu_offset __local_per_cpu_offset + +#else /* ! SMP */ + +#define real_setup_per_cpu_areas() do { } while (0) + +#endif /* SMP */ + +#include <asm-generic/percpu.h> + +#endif /* __ARCH_SPARC64_PERCPU__ */ diff --git a/arch/sparc/include/asm/perfctr.h b/arch/sparc/include/asm/perfctr.h new file mode 100644 index 00000000000..836873002b7 --- /dev/null +++ b/arch/sparc/include/asm/perfctr.h @@ -0,0 +1,173 @@ +/*---------------------------------------- + PERFORMANCE INSTRUMENTATION + Guillaume Thouvenin 08/10/98 + David S. Miller 10/06/98 + ---------------------------------------*/ +#ifndef PERF_COUNTER_API +#define PERF_COUNTER_API + +/* sys_perfctr() interface. First arg is operation code + * from enumeration below. The meaning of further arguments + * are determined by the operation code. + * + * int sys_perfctr(int opcode, unsigned long arg0, + * unsigned long arg1, unsigned long arg2) + * + * Pointers which are passed by the user are pointers to 64-bit + * integers. + * + * Once enabled, performance counter state is retained until the + * process either exits or performs an exec. That is, performance + * counters remain enabled for fork/clone children. + */ +enum perfctr_opcode { + /* Enable UltraSparc performance counters, ARG0 is pointer + * to 64-bit accumulator for D0 counter in PIC, ARG1 is pointer + * to 64-bit accumulator for D1 counter. ARG2 is a pointer to + * the initial PCR register value to use. + */ + PERFCTR_ON, + + /* Disable UltraSparc performance counters. The PCR is written + * with zero and the user counter accumulator pointers and + * working PCR register value are forgotten. + */ + PERFCTR_OFF, + + /* Add current D0 and D1 PIC values into user pointers given + * in PERFCTR_ON operation. The PIC is cleared before returning. + */ + PERFCTR_READ, + + /* Clear the PIC register. */ + PERFCTR_CLRPIC, + + /* Begin using a new PCR value, the pointer to which is passed + * in ARG0. The PIC is also cleared after the new PCR value is + * written. + */ + PERFCTR_SETPCR, + + /* Store in pointer given in ARG0 the current PCR register value + * being used. + */ + PERFCTR_GETPCR +}; + +/* I don't want the kernel's namespace to be polluted with this + * stuff when this file is included. --DaveM + */ +#ifndef __KERNEL__ + +#define PRIV 0x00000001 +#define SYS 0x00000002 +#define USR 0x00000004 + +/* Pic.S0 Selection Bit Field Encoding, Ultra-I/II */ +#define CYCLE_CNT 0x00000000 +#define INSTR_CNT 0x00000010 +#define DISPATCH0_IC_MISS 0x00000020 +#define DISPATCH0_STOREBUF 0x00000030 +#define IC_REF 0x00000080 +#define DC_RD 0x00000090 +#define DC_WR 0x000000A0 +#define LOAD_USE 0x000000B0 +#define EC_REF 0x000000C0 +#define EC_WRITE_HIT_RDO 0x000000D0 +#define EC_SNOOP_INV 0x000000E0 +#define EC_RD_HIT 0x000000F0 + +/* Pic.S0 Selection Bit Field Encoding, Ultra-III */ +#define US3_CYCLE_CNT 0x00000000 +#define US3_INSTR_CNT 0x00000010 +#define US3_DISPATCH0_IC_MISS 0x00000020 +#define US3_DISPATCH0_BR_TGT 0x00000030 +#define US3_DISPATCH0_2ND_BR 0x00000040 +#define US3_RSTALL_STOREQ 0x00000050 +#define US3_RSTALL_IU_USE 0x00000060 +#define US3_IC_REF 0x00000080 +#define US3_DC_RD 0x00000090 +#define US3_DC_WR 0x000000a0 +#define US3_EC_REF 0x000000c0 +#define US3_EC_WR_HIT_RTO 0x000000d0 +#define US3_EC_SNOOP_INV 0x000000e0 +#define US3_EC_RD_MISS 0x000000f0 +#define US3_PC_PORT0_RD 0x00000100 +#define US3_SI_SNOOP 0x00000110 +#define US3_SI_CIQ_FLOW 0x00000120 +#define US3_SI_OWNED 0x00000130 +#define US3_SW_COUNT_0 0x00000140 +#define US3_IU_BR_MISS_TAKEN 0x00000150 +#define US3_IU_BR_COUNT_TAKEN 0x00000160 +#define US3_DISP_RS_MISPRED 0x00000170 +#define US3_FA_PIPE_COMPL 0x00000180 +#define US3_MC_READS_0 0x00000200 +#define US3_MC_READS_1 0x00000210 +#define US3_MC_READS_2 0x00000220 +#define US3_MC_READS_3 0x00000230 +#define US3_MC_STALLS_0 0x00000240 +#define US3_MC_STALLS_2 0x00000250 + +/* Pic.S1 Selection Bit Field Encoding, Ultra-I/II */ +#define CYCLE_CNT_D1 0x00000000 +#define INSTR_CNT_D1 0x00000800 +#define DISPATCH0_IC_MISPRED 0x00001000 +#define DISPATCH0_FP_USE 0x00001800 +#define IC_HIT 0x00004000 +#define DC_RD_HIT 0x00004800 +#define DC_WR_HIT 0x00005000 +#define LOAD_USE_RAW 0x00005800 +#define EC_HIT 0x00006000 +#define EC_WB 0x00006800 +#define EC_SNOOP_CB 0x00007000 +#define EC_IT_HIT 0x00007800 + +/* Pic.S1 Selection Bit Field Encoding, Ultra-III */ +#define US3_CYCLE_CNT_D1 0x00000000 +#define US3_INSTR_CNT_D1 0x00000800 +#define US3_DISPATCH0_MISPRED 0x00001000 +#define US3_IC_MISS_CANCELLED 0x00001800 +#define US3_RE_ENDIAN_MISS 0x00002000 +#define US3_RE_FPU_BYPASS 0x00002800 +#define US3_RE_DC_MISS 0x00003000 +#define US3_RE_EC_MISS 0x00003800 +#define US3_IC_MISS 0x00004000 +#define US3_DC_RD_MISS 0x00004800 +#define US3_DC_WR_MISS 0x00005000 +#define US3_RSTALL_FP_USE 0x00005800 +#define US3_EC_MISSES 0x00006000 +#define US3_EC_WB 0x00006800 +#define US3_EC_SNOOP_CB 0x00007000 +#define US3_EC_IC_MISS 0x00007800 +#define US3_RE_PC_MISS 0x00008000 +#define US3_ITLB_MISS 0x00008800 +#define US3_DTLB_MISS 0x00009000 +#define US3_WC_MISS 0x00009800 +#define US3_WC_SNOOP_CB 0x0000a000 +#define US3_WC_SCRUBBED 0x0000a800 +#define US3_WC_WB_WO_READ 0x0000b000 +#define US3_PC_SOFT_HIT 0x0000c000 +#define US3_PC_SNOOP_INV 0x0000c800 +#define US3_PC_HARD_HIT 0x0000d000 +#define US3_PC_PORT1_RD 0x0000d800 +#define US3_SW_COUNT_1 0x0000e000 +#define US3_IU_STAT_BR_MIS_UNTAKEN 0x0000e800 +#define US3_IU_STAT_BR_COUNT_UNTAKEN 0x0000f000 +#define US3_PC_MS_MISSES 0x0000f800 +#define US3_MC_WRITES_0 0x00010800 +#define US3_MC_WRITES_1 0x00011000 +#define US3_MC_WRITES_2 0x00011800 +#define US3_MC_WRITES_3 0x00012000 +#define US3_MC_STALLS_1 0x00012800 +#define US3_MC_STALLS_3 0x00013000 +#define US3_RE_RAW_MISS 0x00013800 +#define US3_FM_PIPE_COMPLETION 0x00014000 + +struct vcounter_struct { + unsigned long long vcnt0; + unsigned long long vcnt1; +}; + +#endif /* !(__KERNEL__) */ + +#endif /* !(PERF_COUNTER_API) */ diff --git a/arch/sparc/include/asm/pgalloc.h b/arch/sparc/include/asm/pgalloc.h new file mode 100644 index 00000000000..b6db1f7cdca --- /dev/null +++ b/arch/sparc/include/asm/pgalloc.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_PGALLOC_H +#define ___ASM_SPARC_PGALLOC_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/pgalloc_64.h> +#else +#include <asm/pgalloc_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/pgalloc_32.h b/arch/sparc/include/asm/pgalloc_32.h new file mode 100644 index 00000000000..681582d2696 --- /dev/null +++ b/arch/sparc/include/asm/pgalloc_32.h @@ -0,0 +1,68 @@ +#ifndef _SPARC_PGALLOC_H +#define _SPARC_PGALLOC_H + +#include <linux/kernel.h> +#include <linux/sched.h> + +#include <asm/page.h> +#include <asm/btfixup.h> + +struct page; + +extern struct pgtable_cache_struct { + unsigned long *pgd_cache; + unsigned long *pte_cache; + unsigned long pgtable_cache_sz; + unsigned long pgd_cache_sz; +} pgt_quicklists; +#define pgd_quicklist (pgt_quicklists.pgd_cache) +#define pmd_quicklist ((unsigned long *)0) +#define pte_quicklist (pgt_quicklists.pte_cache) +#define pgtable_cache_size (pgt_quicklists.pgtable_cache_sz) +#define pgd_cache_size (pgt_quicklists.pgd_cache_sz) + +extern void check_pgt_cache(void); +BTFIXUPDEF_CALL(void, do_check_pgt_cache, int, int) +#define do_check_pgt_cache(low,high) BTFIXUP_CALL(do_check_pgt_cache)(low,high) + +BTFIXUPDEF_CALL(pgd_t *, get_pgd_fast, void) +#define get_pgd_fast() BTFIXUP_CALL(get_pgd_fast)() + +BTFIXUPDEF_CALL(void, free_pgd_fast, pgd_t *) +#define free_pgd_fast(pgd) BTFIXUP_CALL(free_pgd_fast)(pgd) + +#define pgd_free(mm, pgd) free_pgd_fast(pgd) +#define pgd_alloc(mm) get_pgd_fast() + +BTFIXUPDEF_CALL(void, pgd_set, pgd_t *, pmd_t *) +#define pgd_set(pgdp,pmdp) BTFIXUP_CALL(pgd_set)(pgdp,pmdp) +#define pgd_populate(MM, PGD, PMD) pgd_set(PGD, PMD) + +BTFIXUPDEF_CALL(pmd_t *, pmd_alloc_one, struct mm_struct *, unsigned long) +#define pmd_alloc_one(mm, address) BTFIXUP_CALL(pmd_alloc_one)(mm, address) + +BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *) +#define free_pmd_fast(pmd) BTFIXUP_CALL(free_pmd_fast)(pmd) + +#define pmd_free(mm, pmd) free_pmd_fast(pmd) +#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd) + +BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *) +#define pmd_populate(MM, PMD, PTE) BTFIXUP_CALL(pmd_populate)(PMD, PTE) +#define pmd_pgtable(pmd) pmd_page(pmd) +BTFIXUPDEF_CALL(void, pmd_set, pmd_t *, pte_t *) +#define pmd_populate_kernel(MM, PMD, PTE) BTFIXUP_CALL(pmd_set)(PMD, PTE) + +BTFIXUPDEF_CALL(pgtable_t , pte_alloc_one, struct mm_struct *, unsigned long) +#define pte_alloc_one(mm, address) BTFIXUP_CALL(pte_alloc_one)(mm, address) +BTFIXUPDEF_CALL(pte_t *, pte_alloc_one_kernel, struct mm_struct *, unsigned long) +#define pte_alloc_one_kernel(mm, addr) BTFIXUP_CALL(pte_alloc_one_kernel)(mm, addr) + +BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *) +#define pte_free_kernel(mm, pte) BTFIXUP_CALL(free_pte_fast)(pte) + +BTFIXUPDEF_CALL(void, pte_free, pgtable_t ) +#define pte_free(mm, pte) BTFIXUP_CALL(pte_free)(pte) +#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte) + +#endif /* _SPARC_PGALLOC_H */ diff --git a/arch/sparc/include/asm/pgalloc_64.h b/arch/sparc/include/asm/pgalloc_64.h new file mode 100644 index 00000000000..5bdfa2c6e40 --- /dev/null +++ b/arch/sparc/include/asm/pgalloc_64.h @@ -0,0 +1,81 @@ +#ifndef _SPARC64_PGALLOC_H +#define _SPARC64_PGALLOC_H + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/quicklist.h> + +#include <asm/spitfire.h> +#include <asm/cpudata.h> +#include <asm/cacheflush.h> +#include <asm/page.h> + +/* Page table allocation/freeing. */ + +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + return quicklist_alloc(0, GFP_KERNEL, NULL); +} + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + quicklist_free(0, NULL, pgd); +} + +#define pud_populate(MM, PUD, PMD) pud_set(PUD, PMD) + +static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + return quicklist_alloc(0, GFP_KERNEL, NULL); +} + +static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) +{ + quicklist_free(0, NULL, pmd); +} + +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) +{ + return quicklist_alloc(0, GFP_KERNEL, NULL); +} + +static inline pgtable_t pte_alloc_one(struct mm_struct *mm, + unsigned long address) +{ + struct page *page; + void *pg; + + pg = quicklist_alloc(0, GFP_KERNEL, NULL); + if (!pg) + return NULL; + page = virt_to_page(pg); + pgtable_page_ctor(page); + return page; +} + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + quicklist_free(0, NULL, pte); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage) +{ + pgtable_page_dtor(ptepage); + quicklist_free_page(0, NULL, ptepage); +} + + +#define pmd_populate_kernel(MM, PMD, PTE) pmd_set(PMD, PTE) +#define pmd_populate(MM,PMD,PTE_PAGE) \ + pmd_populate_kernel(MM,PMD,page_address(PTE_PAGE)) +#define pmd_pgtable(pmd) pmd_page(pmd) + +static inline void check_pgt_cache(void) +{ + quicklist_trim(0, NULL, 25, 16); +} + +#endif /* _SPARC64_PGALLOC_H */ diff --git a/arch/sparc/include/asm/pgtable.h b/arch/sparc/include/asm/pgtable.h new file mode 100644 index 00000000000..59ba6f62073 --- /dev/null +++ b/arch/sparc/include/asm/pgtable.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_PGTABLE_H +#define ___ASM_SPARC_PGTABLE_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/pgtable_64.h> +#else +#include <asm/pgtable_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h new file mode 100644 index 00000000000..08237fda887 --- /dev/null +++ b/arch/sparc/include/asm/pgtable_32.h @@ -0,0 +1,480 @@ +#ifndef _SPARC_PGTABLE_H +#define _SPARC_PGTABLE_H + +/* asm/pgtable.h: Defines and functions used to work + * with Sparc page tables. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ + +#ifndef __ASSEMBLY__ +#include <asm-generic/4level-fixup.h> + +#include <linux/spinlock.h> +#include <linux/swap.h> +#include <asm/types.h> +#ifdef CONFIG_SUN4 +#include <asm/pgtsun4.h> +#else +#include <asm/pgtsun4c.h> +#endif +#include <asm/pgtsrmmu.h> +#include <asm/vac-ops.h> +#include <asm/oplib.h> +#include <asm/btfixup.h> +#include <asm/system.h> + + +struct vm_area_struct; +struct page; + +extern void load_mmu(void); +extern unsigned long calc_highpages(void); + +BTFIXUPDEF_SIMM13(pgdir_shift) +BTFIXUPDEF_SETHI(pgdir_size) +BTFIXUPDEF_SETHI(pgdir_mask) + +BTFIXUPDEF_SIMM13(ptrs_per_pmd) +BTFIXUPDEF_SIMM13(ptrs_per_pgd) +BTFIXUPDEF_SIMM13(user_ptrs_per_pgd) + +#define pte_ERROR(e) __builtin_trap() +#define pmd_ERROR(e) __builtin_trap() +#define pgd_ERROR(e) __builtin_trap() + +BTFIXUPDEF_INT(page_none) +BTFIXUPDEF_INT(page_copy) +BTFIXUPDEF_INT(page_readonly) +BTFIXUPDEF_INT(page_kernel) + +#define PMD_SHIFT SUN4C_PMD_SHIFT +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) +#define PMD_ALIGN(__addr) (((__addr) + ~PMD_MASK) & PMD_MASK) +#define PGDIR_SHIFT BTFIXUP_SIMM13(pgdir_shift) +#define PGDIR_SIZE BTFIXUP_SETHI(pgdir_size) +#define PGDIR_MASK BTFIXUP_SETHI(pgdir_mask) +#define PTRS_PER_PTE 1024 +#define PTRS_PER_PMD BTFIXUP_SIMM13(ptrs_per_pmd) +#define PTRS_PER_PGD BTFIXUP_SIMM13(ptrs_per_pgd) +#define USER_PTRS_PER_PGD BTFIXUP_SIMM13(user_ptrs_per_pgd) +#define FIRST_USER_ADDRESS 0 +#define PTE_SIZE (PTRS_PER_PTE*4) + +#define PAGE_NONE __pgprot(BTFIXUP_INT(page_none)) +extern pgprot_t PAGE_SHARED; +#define PAGE_COPY __pgprot(BTFIXUP_INT(page_copy)) +#define PAGE_READONLY __pgprot(BTFIXUP_INT(page_readonly)) + +extern unsigned long page_kernel; + +#ifdef MODULE +#define PAGE_KERNEL page_kernel +#else +#define PAGE_KERNEL __pgprot(BTFIXUP_INT(page_kernel)) +#endif + +/* Top-level page directory */ +extern pgd_t swapper_pg_dir[1024]; + +extern void paging_init(void); + +/* Page table for 0-4MB for everybody, on the Sparc this + * holds the same as on the i386. + */ +extern pte_t pg0[1024]; +extern pte_t pg1[1024]; +extern pte_t pg2[1024]; +extern pte_t pg3[1024]; + +extern unsigned long ptr_in_current_pgd; + +/* Here is a trick, since mmap.c need the initializer elements for + * protection_map[] to be constant at compile time, I set the following + * to all zeros. I set it to the real values after I link in the + * appropriate MMU page table routines at boot time. + */ +#define __P000 __pgprot(0) +#define __P001 __pgprot(0) +#define __P010 __pgprot(0) +#define __P011 __pgprot(0) +#define __P100 __pgprot(0) +#define __P101 __pgprot(0) +#define __P110 __pgprot(0) +#define __P111 __pgprot(0) + +#define __S000 __pgprot(0) +#define __S001 __pgprot(0) +#define __S010 __pgprot(0) +#define __S011 __pgprot(0) +#define __S100 __pgprot(0) +#define __S101 __pgprot(0) +#define __S110 __pgprot(0) +#define __S111 __pgprot(0) + +extern int num_contexts; + +/* First physical page can be anywhere, the following is needed so that + * va-->pa and vice versa conversions work properly without performance + * hit for all __pa()/__va() operations. + */ +extern unsigned long phys_base; +extern unsigned long pfn_base; + +/* + * BAD_PAGETABLE is used when we need a bogus page-table, while + * BAD_PAGE is used for a bogus page. + * + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern pte_t * __bad_pagetable(void); +extern pte_t __bad_page(void); +extern unsigned long empty_zero_page; + +#define BAD_PAGETABLE __bad_pagetable() +#define BAD_PAGE __bad_page() +#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page)) + +/* + */ +BTFIXUPDEF_CALL_CONST(struct page *, pmd_page, pmd_t) +BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page_vaddr, pgd_t) + +#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd) +#define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd) + +BTFIXUPDEF_SETHI(none_mask) +BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t) +BTFIXUPDEF_CALL(void, pte_clear, pte_t *) + +static inline int pte_none(pte_t pte) +{ + return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask)); +} + +#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte) +#define pte_clear(mm,addr,pte) BTFIXUP_CALL(pte_clear)(pte) + +BTFIXUPDEF_CALL_CONST(int, pmd_bad, pmd_t) +BTFIXUPDEF_CALL_CONST(int, pmd_present, pmd_t) +BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *) + +static inline int pmd_none(pmd_t pmd) +{ + return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask)); +} + +#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd) +#define pmd_present(pmd) BTFIXUP_CALL(pmd_present)(pmd) +#define pmd_clear(pmd) BTFIXUP_CALL(pmd_clear)(pmd) + +BTFIXUPDEF_CALL_CONST(int, pgd_none, pgd_t) +BTFIXUPDEF_CALL_CONST(int, pgd_bad, pgd_t) +BTFIXUPDEF_CALL_CONST(int, pgd_present, pgd_t) +BTFIXUPDEF_CALL(void, pgd_clear, pgd_t *) + +#define pgd_none(pgd) BTFIXUP_CALL(pgd_none)(pgd) +#define pgd_bad(pgd) BTFIXUP_CALL(pgd_bad)(pgd) +#define pgd_present(pgd) BTFIXUP_CALL(pgd_present)(pgd) +#define pgd_clear(pgd) BTFIXUP_CALL(pgd_clear)(pgd) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +BTFIXUPDEF_HALF(pte_writei) +BTFIXUPDEF_HALF(pte_dirtyi) +BTFIXUPDEF_HALF(pte_youngi) + +static int pte_write(pte_t pte) __attribute_const__; +static inline int pte_write(pte_t pte) +{ + return pte_val(pte) & BTFIXUP_HALF(pte_writei); +} + +static int pte_dirty(pte_t pte) __attribute_const__; +static inline int pte_dirty(pte_t pte) +{ + return pte_val(pte) & BTFIXUP_HALF(pte_dirtyi); +} + +static int pte_young(pte_t pte) __attribute_const__; +static inline int pte_young(pte_t pte) +{ + return pte_val(pte) & BTFIXUP_HALF(pte_youngi); +} + +/* + * The following only work if pte_present() is not true. + */ +BTFIXUPDEF_HALF(pte_filei) + +static int pte_file(pte_t pte) __attribute_const__; +static inline int pte_file(pte_t pte) +{ + return pte_val(pte) & BTFIXUP_HALF(pte_filei); +} + +static inline int pte_special(pte_t pte) +{ + return 0; +} + +/* + */ +BTFIXUPDEF_HALF(pte_wrprotecti) +BTFIXUPDEF_HALF(pte_mkcleani) +BTFIXUPDEF_HALF(pte_mkoldi) + +static pte_t pte_wrprotect(pte_t pte) __attribute_const__; +static inline pte_t pte_wrprotect(pte_t pte) +{ + return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_wrprotecti)); +} + +static pte_t pte_mkclean(pte_t pte) __attribute_const__; +static inline pte_t pte_mkclean(pte_t pte) +{ + return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkcleani)); +} + +static pte_t pte_mkold(pte_t pte) __attribute_const__; +static inline pte_t pte_mkold(pte_t pte) +{ + return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkoldi)); +} + +BTFIXUPDEF_CALL_CONST(pte_t, pte_mkwrite, pte_t) +BTFIXUPDEF_CALL_CONST(pte_t, pte_mkdirty, pte_t) +BTFIXUPDEF_CALL_CONST(pte_t, pte_mkyoung, pte_t) + +#define pte_mkwrite(pte) BTFIXUP_CALL(pte_mkwrite)(pte) +#define pte_mkdirty(pte) BTFIXUP_CALL(pte_mkdirty)(pte) +#define pte_mkyoung(pte) BTFIXUP_CALL(pte_mkyoung)(pte) + +#define pte_mkspecial(pte) (pte) + +#define pfn_pte(pfn, prot) mk_pte(pfn_to_page(pfn), prot) + +BTFIXUPDEF_CALL(unsigned long, pte_pfn, pte_t) +#define pte_pfn(pte) BTFIXUP_CALL(pte_pfn)(pte) +#define pte_page(pte) pfn_to_page(pte_pfn(pte)) + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +BTFIXUPDEF_CALL_CONST(pte_t, mk_pte, struct page *, pgprot_t) + +BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_phys, unsigned long, pgprot_t) +BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_io, unsigned long, pgprot_t, int) +BTFIXUPDEF_CALL_CONST(pgprot_t, pgprot_noncached, pgprot_t) + +#define mk_pte(page,pgprot) BTFIXUP_CALL(mk_pte)(page,pgprot) +#define mk_pte_phys(page,pgprot) BTFIXUP_CALL(mk_pte_phys)(page,pgprot) +#define mk_pte_io(page,pgprot,space) BTFIXUP_CALL(mk_pte_io)(page,pgprot,space) + +#define pgprot_noncached(pgprot) BTFIXUP_CALL(pgprot_noncached)(pgprot) + +BTFIXUPDEF_INT(pte_modify_mask) + +static pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__; +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + return __pte((pte_val(pte) & BTFIXUP_INT(pte_modify_mask)) | + pgprot_val(newprot)); +} + +#define pgd_index(address) ((address) >> PGDIR_SHIFT) + +/* to find an entry in a page-table-directory */ +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* Find an entry in the second-level page table.. */ +BTFIXUPDEF_CALL(pmd_t *, pmd_offset, pgd_t *, unsigned long) +#define pmd_offset(dir,addr) BTFIXUP_CALL(pmd_offset)(dir,addr) + +/* Find an entry in the third-level page table.. */ +BTFIXUPDEF_CALL(pte_t *, pte_offset_kernel, pmd_t *, unsigned long) +#define pte_offset_kernel(dir,addr) BTFIXUP_CALL(pte_offset_kernel)(dir,addr) + +/* + * This shortcut works on sun4m (and sun4d) because the nocache area is static, + * and sun4c is guaranteed to have no highmem anyway. + */ +#define pte_offset_map(d, a) pte_offset_kernel(d,a) +#define pte_offset_map_nested(d, a) pte_offset_kernel(d,a) + +#define pte_unmap(pte) do{}while(0) +#define pte_unmap_nested(pte) do{}while(0) + +/* Certain architectures need to do special things when pte's + * within a page table are directly modified. Thus, the following + * hook is made available. + */ + +BTFIXUPDEF_CALL(void, set_pte, pte_t *, pte_t) + +#define set_pte(ptep,pteval) BTFIXUP_CALL(set_pte)(ptep,pteval) +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +struct seq_file; +BTFIXUPDEF_CALL(void, mmu_info, struct seq_file *) + +#define mmu_info(p) BTFIXUP_CALL(mmu_info)(p) + +/* Fault handler stuff... */ +#define FAULT_CODE_PROT 0x1 +#define FAULT_CODE_WRITE 0x2 +#define FAULT_CODE_USER 0x4 + +BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t) + +#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte) + +BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long, + unsigned long, unsigned int) +BTFIXUPDEF_CALL(void, sparc_unmapiorange, unsigned long, unsigned int) +#define sparc_mapiorange(bus,pa,va,len) BTFIXUP_CALL(sparc_mapiorange)(bus,pa,va,len) +#define sparc_unmapiorange(va,len) BTFIXUP_CALL(sparc_unmapiorange)(va,len) + +extern int invalid_segment; + +/* Encode and de-code a swap entry */ +BTFIXUPDEF_CALL(unsigned long, __swp_type, swp_entry_t) +BTFIXUPDEF_CALL(unsigned long, __swp_offset, swp_entry_t) +BTFIXUPDEF_CALL(swp_entry_t, __swp_entry, unsigned long, unsigned long) + +#define __swp_type(__x) BTFIXUP_CALL(__swp_type)(__x) +#define __swp_offset(__x) BTFIXUP_CALL(__swp_offset)(__x) +#define __swp_entry(__type,__off) BTFIXUP_CALL(__swp_entry)(__type,__off) + +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +/* file-offset-in-pte helpers */ +BTFIXUPDEF_CALL(unsigned long, pte_to_pgoff, pte_t pte); +BTFIXUPDEF_CALL(pte_t, pgoff_to_pte, unsigned long pgoff); + +#define pte_to_pgoff(pte) BTFIXUP_CALL(pte_to_pgoff)(pte) +#define pgoff_to_pte(off) BTFIXUP_CALL(pgoff_to_pte)(off) + +/* + * This is made a constant because mm/fremap.c required a constant. + * Note that layout of these bits is different between sun4c.c and srmmu.c. + */ +#define PTE_FILE_MAX_BITS 24 + +/* + */ +struct ctx_list { + struct ctx_list *next; + struct ctx_list *prev; + unsigned int ctx_number; + struct mm_struct *ctx_mm; +}; + +extern struct ctx_list *ctx_list_pool; /* Dynamically allocated */ +extern struct ctx_list ctx_free; /* Head of free list */ +extern struct ctx_list ctx_used; /* Head of used contexts list */ + +#define NO_CONTEXT -1 + +static inline void remove_from_ctx_list(struct ctx_list *entry) +{ + entry->next->prev = entry->prev; + entry->prev->next = entry->next; +} + +static inline void add_to_ctx_list(struct ctx_list *head, struct ctx_list *entry) +{ + entry->next = head; + (entry->prev = head->prev)->next = entry; + head->prev = entry; +} +#define add_to_free_ctxlist(entry) add_to_ctx_list(&ctx_free, entry) +#define add_to_used_ctxlist(entry) add_to_ctx_list(&ctx_used, entry) + +static inline unsigned long +__get_phys (unsigned long addr) +{ + switch (sparc_cpu_model){ + case sun4: + case sun4c: + return sun4c_get_pte (addr) << PAGE_SHIFT; + case sun4m: + case sun4d: + return ((srmmu_get_pte (addr) & 0xffffff00) << 4); + default: + return 0; + } +} + +static inline int +__get_iospace (unsigned long addr) +{ + switch (sparc_cpu_model){ + case sun4: + case sun4c: + return -1; /* Don't check iospace on sun4c */ + case sun4m: + case sun4d: + return (srmmu_get_pte (addr) >> 28); + default: + return -1; + } +} + +extern unsigned long *sparc_valid_addr_bitmap; + +/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ +#define kern_addr_valid(addr) \ + (test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap)) + +extern int io_remap_pfn_range(struct vm_area_struct *vma, + unsigned long from, unsigned long pfn, + unsigned long size, pgprot_t prot); + +/* + * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in + * its high 4 bits. These macros/functions put it there or get it from there. + */ +#define MK_IOSPACE_PFN(space, pfn) (pfn | (space << (BITS_PER_LONG - 4))) +#define GET_IOSPACE(pfn) (pfn >> (BITS_PER_LONG - 4)) +#define GET_PFN(pfn) (pfn & 0x0fffffffUL) + +#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS +#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ +({ \ + int __changed = !pte_same(*(__ptep), __entry); \ + if (__changed) { \ + set_pte_at((__vma)->vm_mm, (__address), __ptep, __entry); \ + flush_tlb_page(__vma, __address); \ + } \ + (sparc_cpu_model == sun4c) || __changed; \ +}) + +#include <asm-generic/pgtable.h> + +#endif /* !(__ASSEMBLY__) */ + +#define VMALLOC_START 0xfe600000 +/* XXX Alter this when I get around to fixing sun4c - Anton */ +#define VMALLOC_END 0xffc00000 + + +/* We provide our own get_unmapped_area to cope with VA holes for userland */ +#define HAVE_ARCH_UNMAPPED_AREA + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) + +#endif /* !(_SPARC_PGTABLE_H) */ diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h new file mode 100644 index 00000000000..bb9ec2cce35 --- /dev/null +++ b/arch/sparc/include/asm/pgtable_64.h @@ -0,0 +1,775 @@ +/* + * pgtable.h: SpitFire page table operations. + * + * Copyright 1996,1997 David S. Miller (davem@caip.rutgers.edu) + * Copyright 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ + +#ifndef _SPARC64_PGTABLE_H +#define _SPARC64_PGTABLE_H + +/* This file contains the functions and defines necessary to modify and use + * the SpitFire page tables. + */ + +#include <asm-generic/pgtable-nopud.h> + +#include <linux/compiler.h> +#include <linux/const.h> +#include <asm/types.h> +#include <asm/spitfire.h> +#include <asm/asi.h> +#include <asm/system.h> +#include <asm/page.h> +#include <asm/processor.h> + +/* The kernel image occupies 0x4000000 to 0x6000000 (4MB --> 96MB). + * The page copy blockops can use 0x6000000 to 0x8000000. + * The TSB is mapped in the 0x8000000 to 0xa000000 range. + * The PROM resides in an area spanning 0xf0000000 to 0x100000000. + * The vmalloc area spans 0x100000000 to 0x200000000. + * Since modules need to be in the lowest 32-bits of the address space, + * we place them right before the OBP area from 0x10000000 to 0xf0000000. + * There is a single static kernel PMD which maps from 0x0 to address + * 0x400000000. + */ +#define TLBTEMP_BASE _AC(0x0000000006000000,UL) +#define TSBMAP_BASE _AC(0x0000000008000000,UL) +#define MODULES_VADDR _AC(0x0000000010000000,UL) +#define MODULES_LEN _AC(0x00000000e0000000,UL) +#define MODULES_END _AC(0x00000000f0000000,UL) +#define LOW_OBP_ADDRESS _AC(0x00000000f0000000,UL) +#define HI_OBP_ADDRESS _AC(0x0000000100000000,UL) +#define VMALLOC_START _AC(0x0000000100000000,UL) +#define VMALLOC_END _AC(0x0000000200000000,UL) +#define VMEMMAP_BASE _AC(0x0000000200000000,UL) + +#define vmemmap ((struct page *)VMEMMAP_BASE) + +/* XXX All of this needs to be rethought so we can take advantage + * XXX cheetah's full 64-bit virtual address space, ie. no more hole + * XXX in the middle like on spitfire. -DaveM + */ +/* + * Given a virtual address, the lowest PAGE_SHIFT bits determine offset + * into the page; the next higher PAGE_SHIFT-3 bits determine the pte# + * in the proper pagetable (the -3 is from the 8 byte ptes, and each page + * table is a single page long). The next higher PMD_BITS determine pmd# + * in the proper pmdtable (where we must have PMD_BITS <= (PAGE_SHIFT-2) + * since the pmd entries are 4 bytes, and each pmd page is a single page + * long). Finally, the higher few bits determine pgde#. + */ + +/* PMD_SHIFT determines the size of the area a second-level page + * table can map + */ +#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT-3)) +#define PMD_SIZE (_AC(1,UL) << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) +#define PMD_BITS (PAGE_SHIFT - 2) + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#define PGDIR_SHIFT (PAGE_SHIFT + (PAGE_SHIFT-3) + PMD_BITS) +#define PGDIR_SIZE (_AC(1,UL) << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) +#define PGDIR_BITS (PAGE_SHIFT - 2) + +#ifndef __ASSEMBLY__ + +#include <linux/sched.h> + +/* Entries per page directory level. */ +#define PTRS_PER_PTE (1UL << (PAGE_SHIFT-3)) +#define PTRS_PER_PMD (1UL << PMD_BITS) +#define PTRS_PER_PGD (1UL << PGDIR_BITS) + +/* Kernel has a separate 44bit address space. */ +#define FIRST_USER_ADDRESS 0 + +#define pte_ERROR(e) __builtin_trap() +#define pmd_ERROR(e) __builtin_trap() +#define pgd_ERROR(e) __builtin_trap() + +#endif /* !(__ASSEMBLY__) */ + +/* PTE bits which are the same in SUN4U and SUN4V format. */ +#define _PAGE_VALID _AC(0x8000000000000000,UL) /* Valid TTE */ +#define _PAGE_R _AC(0x8000000000000000,UL) /* Keep ref bit uptodate*/ + +/* SUN4U pte bits... */ +#define _PAGE_SZ4MB_4U _AC(0x6000000000000000,UL) /* 4MB Page */ +#define _PAGE_SZ512K_4U _AC(0x4000000000000000,UL) /* 512K Page */ +#define _PAGE_SZ64K_4U _AC(0x2000000000000000,UL) /* 64K Page */ +#define _PAGE_SZ8K_4U _AC(0x0000000000000000,UL) /* 8K Page */ +#define _PAGE_NFO_4U _AC(0x1000000000000000,UL) /* No Fault Only */ +#define _PAGE_IE_4U _AC(0x0800000000000000,UL) /* Invert Endianness */ +#define _PAGE_SOFT2_4U _AC(0x07FC000000000000,UL) /* Software bits, set 2 */ +#define _PAGE_RES1_4U _AC(0x0002000000000000,UL) /* Reserved */ +#define _PAGE_SZ32MB_4U _AC(0x0001000000000000,UL) /* (Panther) 32MB page */ +#define _PAGE_SZ256MB_4U _AC(0x2001000000000000,UL) /* (Panther) 256MB page */ +#define _PAGE_SZALL_4U _AC(0x6001000000000000,UL) /* All pgsz bits */ +#define _PAGE_SN_4U _AC(0x0000800000000000,UL) /* (Cheetah) Snoop */ +#define _PAGE_RES2_4U _AC(0x0000780000000000,UL) /* Reserved */ +#define _PAGE_PADDR_4U _AC(0x000007FFFFFFE000,UL) /* (Cheetah) pa[42:13] */ +#define _PAGE_SOFT_4U _AC(0x0000000000001F80,UL) /* Software bits: */ +#define _PAGE_EXEC_4U _AC(0x0000000000001000,UL) /* Executable SW bit */ +#define _PAGE_MODIFIED_4U _AC(0x0000000000000800,UL) /* Modified (dirty) */ +#define _PAGE_FILE_4U _AC(0x0000000000000800,UL) /* Pagecache page */ +#define _PAGE_ACCESSED_4U _AC(0x0000000000000400,UL) /* Accessed (ref'd) */ +#define _PAGE_READ_4U _AC(0x0000000000000200,UL) /* Readable SW Bit */ +#define _PAGE_WRITE_4U _AC(0x0000000000000100,UL) /* Writable SW Bit */ +#define _PAGE_PRESENT_4U _AC(0x0000000000000080,UL) /* Present */ +#define _PAGE_L_4U _AC(0x0000000000000040,UL) /* Locked TTE */ +#define _PAGE_CP_4U _AC(0x0000000000000020,UL) /* Cacheable in P-Cache */ +#define _PAGE_CV_4U _AC(0x0000000000000010,UL) /* Cacheable in V-Cache */ +#define _PAGE_E_4U _AC(0x0000000000000008,UL) /* side-Effect */ +#define _PAGE_P_4U _AC(0x0000000000000004,UL) /* Privileged Page */ +#define _PAGE_W_4U _AC(0x0000000000000002,UL) /* Writable */ + +/* SUN4V pte bits... */ +#define _PAGE_NFO_4V _AC(0x4000000000000000,UL) /* No Fault Only */ +#define _PAGE_SOFT2_4V _AC(0x3F00000000000000,UL) /* Software bits, set 2 */ +#define _PAGE_MODIFIED_4V _AC(0x2000000000000000,UL) /* Modified (dirty) */ +#define _PAGE_ACCESSED_4V _AC(0x1000000000000000,UL) /* Accessed (ref'd) */ +#define _PAGE_READ_4V _AC(0x0800000000000000,UL) /* Readable SW Bit */ +#define _PAGE_WRITE_4V _AC(0x0400000000000000,UL) /* Writable SW Bit */ +#define _PAGE_PADDR_4V _AC(0x00FFFFFFFFFFE000,UL) /* paddr[55:13] */ +#define _PAGE_IE_4V _AC(0x0000000000001000,UL) /* Invert Endianness */ +#define _PAGE_E_4V _AC(0x0000000000000800,UL) /* side-Effect */ +#define _PAGE_CP_4V _AC(0x0000000000000400,UL) /* Cacheable in P-Cache */ +#define _PAGE_CV_4V _AC(0x0000000000000200,UL) /* Cacheable in V-Cache */ +#define _PAGE_P_4V _AC(0x0000000000000100,UL) /* Privileged Page */ +#define _PAGE_EXEC_4V _AC(0x0000000000000080,UL) /* Executable Page */ +#define _PAGE_W_4V _AC(0x0000000000000040,UL) /* Writable */ +#define _PAGE_SOFT_4V _AC(0x0000000000000030,UL) /* Software bits */ +#define _PAGE_FILE_4V _AC(0x0000000000000020,UL) /* Pagecache page */ +#define _PAGE_PRESENT_4V _AC(0x0000000000000010,UL) /* Present */ +#define _PAGE_RESV_4V _AC(0x0000000000000008,UL) /* Reserved */ +#define _PAGE_SZ16GB_4V _AC(0x0000000000000007,UL) /* 16GB Page */ +#define _PAGE_SZ2GB_4V _AC(0x0000000000000006,UL) /* 2GB Page */ +#define _PAGE_SZ256MB_4V _AC(0x0000000000000005,UL) /* 256MB Page */ +#define _PAGE_SZ32MB_4V _AC(0x0000000000000004,UL) /* 32MB Page */ +#define _PAGE_SZ4MB_4V _AC(0x0000000000000003,UL) /* 4MB Page */ +#define _PAGE_SZ512K_4V _AC(0x0000000000000002,UL) /* 512K Page */ +#define _PAGE_SZ64K_4V _AC(0x0000000000000001,UL) /* 64K Page */ +#define _PAGE_SZ8K_4V _AC(0x0000000000000000,UL) /* 8K Page */ +#define _PAGE_SZALL_4V _AC(0x0000000000000007,UL) /* All pgsz bits */ + +#if PAGE_SHIFT == 13 +#define _PAGE_SZBITS_4U _PAGE_SZ8K_4U +#define _PAGE_SZBITS_4V _PAGE_SZ8K_4V +#elif PAGE_SHIFT == 16 +#define _PAGE_SZBITS_4U _PAGE_SZ64K_4U +#define _PAGE_SZBITS_4V _PAGE_SZ64K_4V +#else +#error Wrong PAGE_SHIFT specified +#endif + +#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) +#define _PAGE_SZHUGE_4U _PAGE_SZ4MB_4U +#define _PAGE_SZHUGE_4V _PAGE_SZ4MB_4V +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K) +#define _PAGE_SZHUGE_4U _PAGE_SZ512K_4U +#define _PAGE_SZHUGE_4V _PAGE_SZ512K_4V +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +#define _PAGE_SZHUGE_4U _PAGE_SZ64K_4U +#define _PAGE_SZHUGE_4V _PAGE_SZ64K_4V +#endif + +/* These are actually filled in at boot time by sun4{u,v}_pgprot_init() */ +#define __P000 __pgprot(0) +#define __P001 __pgprot(0) +#define __P010 __pgprot(0) +#define __P011 __pgprot(0) +#define __P100 __pgprot(0) +#define __P101 __pgprot(0) +#define __P110 __pgprot(0) +#define __P111 __pgprot(0) + +#define __S000 __pgprot(0) +#define __S001 __pgprot(0) +#define __S010 __pgprot(0) +#define __S011 __pgprot(0) +#define __S100 __pgprot(0) +#define __S101 __pgprot(0) +#define __S110 __pgprot(0) +#define __S111 __pgprot(0) + +#ifndef __ASSEMBLY__ + +extern pte_t mk_pte_io(unsigned long, pgprot_t, int, unsigned long); + +extern unsigned long pte_sz_bits(unsigned long size); + +extern pgprot_t PAGE_KERNEL; +extern pgprot_t PAGE_KERNEL_LOCKED; +extern pgprot_t PAGE_COPY; +extern pgprot_t PAGE_SHARED; + +/* XXX This uglyness is for the atyfb driver's sparc mmap() support. XXX */ +extern unsigned long _PAGE_IE; +extern unsigned long _PAGE_E; +extern unsigned long _PAGE_CACHE; + +extern unsigned long pg_iobits; +extern unsigned long _PAGE_ALL_SZ_BITS; +extern unsigned long _PAGE_SZBITS; + +extern struct page *mem_map_zero; +#define ZERO_PAGE(vaddr) (mem_map_zero) + +/* PFNs are real physical page numbers. However, mem_map only begins to record + * per-page information starting at pfn_base. This is to handle systems where + * the first physical page in the machine is at some huge physical address, + * such as 4GB. This is common on a partitioned E10000, for example. + */ +static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot) +{ + unsigned long paddr = pfn << PAGE_SHIFT; + unsigned long sz_bits; + + sz_bits = 0UL; + if (_PAGE_SZBITS_4U != 0UL || _PAGE_SZBITS_4V != 0UL) { + __asm__ __volatile__( + "\n661: sethi %%uhi(%1), %0\n" + " sllx %0, 32, %0\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " mov %2, %0\n" + " nop\n" + " .previous\n" + : "=r" (sz_bits) + : "i" (_PAGE_SZBITS_4U), "i" (_PAGE_SZBITS_4V)); + } + return __pte(paddr | sz_bits | pgprot_val(prot)); +} +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) + +/* This one can be done with two shifts. */ +static inline unsigned long pte_pfn(pte_t pte) +{ + unsigned long ret; + + __asm__ __volatile__( + "\n661: sllx %1, %2, %0\n" + " srlx %0, %3, %0\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sllx %1, %4, %0\n" + " srlx %0, %5, %0\n" + " .previous\n" + : "=r" (ret) + : "r" (pte_val(pte)), + "i" (21), "i" (21 + PAGE_SHIFT), + "i" (8), "i" (8 + PAGE_SHIFT)); + + return ret; +} +#define pte_page(x) pfn_to_page(pte_pfn(x)) + +static inline pte_t pte_modify(pte_t pte, pgprot_t prot) +{ + unsigned long mask, tmp; + + /* SUN4U: 0x600307ffffffecb8 (negated == 0x9ffcf80000001347) + * SUN4V: 0x30ffffffffffee17 (negated == 0xcf000000000011e8) + * + * Even if we use negation tricks the result is still a 6 + * instruction sequence, so don't try to play fancy and just + * do the most straightforward implementation. + * + * Note: We encode this into 3 sun4v 2-insn patch sequences. + */ + + __asm__ __volatile__( + "\n661: sethi %%uhi(%2), %1\n" + " sethi %%hi(%2), %0\n" + "\n662: or %1, %%ulo(%2), %1\n" + " or %0, %%lo(%2), %0\n" + "\n663: sllx %1, 32, %1\n" + " or %0, %1, %0\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%3), %1\n" + " sethi %%hi(%3), %0\n" + " .word 662b\n" + " or %1, %%ulo(%3), %1\n" + " or %0, %%lo(%3), %0\n" + " .word 663b\n" + " sllx %1, 32, %1\n" + " or %0, %1, %0\n" + " .previous\n" + : "=r" (mask), "=r" (tmp) + : "i" (_PAGE_PADDR_4U | _PAGE_MODIFIED_4U | _PAGE_ACCESSED_4U | + _PAGE_CP_4U | _PAGE_CV_4U | _PAGE_E_4U | _PAGE_PRESENT_4U | + _PAGE_SZBITS_4U), + "i" (_PAGE_PADDR_4V | _PAGE_MODIFIED_4V | _PAGE_ACCESSED_4V | + _PAGE_CP_4V | _PAGE_CV_4V | _PAGE_E_4V | _PAGE_PRESENT_4V | + _PAGE_SZBITS_4V)); + + return __pte((pte_val(pte) & mask) | (pgprot_val(prot) & ~mask)); +} + +static inline pte_t pgoff_to_pte(unsigned long off) +{ + off <<= PAGE_SHIFT; + + __asm__ __volatile__( + "\n661: or %0, %2, %0\n" + " .section .sun4v_1insn_patch, \"ax\"\n" + " .word 661b\n" + " or %0, %3, %0\n" + " .previous\n" + : "=r" (off) + : "0" (off), "i" (_PAGE_FILE_4U), "i" (_PAGE_FILE_4V)); + + return __pte(off); +} + +static inline pgprot_t pgprot_noncached(pgprot_t prot) +{ + unsigned long val = pgprot_val(prot); + + __asm__ __volatile__( + "\n661: andn %0, %2, %0\n" + " or %0, %3, %0\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " andn %0, %4, %0\n" + " or %0, %5, %0\n" + " .previous\n" + : "=r" (val) + : "0" (val), "i" (_PAGE_CP_4U | _PAGE_CV_4U), "i" (_PAGE_E_4U), + "i" (_PAGE_CP_4V | _PAGE_CV_4V), "i" (_PAGE_E_4V)); + + return __pgprot(val); +} +/* Various pieces of code check for platform support by ifdef testing + * on "pgprot_noncached". That's broken and should be fixed, but for + * now... + */ +#define pgprot_noncached pgprot_noncached + +#ifdef CONFIG_HUGETLB_PAGE +static inline pte_t pte_mkhuge(pte_t pte) +{ + unsigned long mask; + + __asm__ __volatile__( + "\n661: sethi %%uhi(%1), %0\n" + " sllx %0, 32, %0\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " mov %2, %0\n" + " nop\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_SZHUGE_4U), "i" (_PAGE_SZHUGE_4V)); + + return __pte(pte_val(pte) | mask); +} +#endif + +static inline pte_t pte_mkdirty(pte_t pte) +{ + unsigned long val = pte_val(pte), tmp; + + __asm__ __volatile__( + "\n661: or %0, %3, %0\n" + " nop\n" + "\n662: nop\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%4), %1\n" + " sllx %1, 32, %1\n" + " .word 662b\n" + " or %1, %%lo(%4), %1\n" + " or %0, %1, %0\n" + " .previous\n" + : "=r" (val), "=r" (tmp) + : "0" (val), "i" (_PAGE_MODIFIED_4U | _PAGE_W_4U), + "i" (_PAGE_MODIFIED_4V | _PAGE_W_4V)); + + return __pte(val); +} + +static inline pte_t pte_mkclean(pte_t pte) +{ + unsigned long val = pte_val(pte), tmp; + + __asm__ __volatile__( + "\n661: andn %0, %3, %0\n" + " nop\n" + "\n662: nop\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%4), %1\n" + " sllx %1, 32, %1\n" + " .word 662b\n" + " or %1, %%lo(%4), %1\n" + " andn %0, %1, %0\n" + " .previous\n" + : "=r" (val), "=r" (tmp) + : "0" (val), "i" (_PAGE_MODIFIED_4U | _PAGE_W_4U), + "i" (_PAGE_MODIFIED_4V | _PAGE_W_4V)); + + return __pte(val); +} + +static inline pte_t pte_mkwrite(pte_t pte) +{ + unsigned long val = pte_val(pte), mask; + + __asm__ __volatile__( + "\n661: mov %1, %0\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%2), %0\n" + " sllx %0, 32, %0\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V)); + + return __pte(val | mask); +} + +static inline pte_t pte_wrprotect(pte_t pte) +{ + unsigned long val = pte_val(pte), tmp; + + __asm__ __volatile__( + "\n661: andn %0, %3, %0\n" + " nop\n" + "\n662: nop\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%4), %1\n" + " sllx %1, 32, %1\n" + " .word 662b\n" + " or %1, %%lo(%4), %1\n" + " andn %0, %1, %0\n" + " .previous\n" + : "=r" (val), "=r" (tmp) + : "0" (val), "i" (_PAGE_WRITE_4U | _PAGE_W_4U), + "i" (_PAGE_WRITE_4V | _PAGE_W_4V)); + + return __pte(val); +} + +static inline pte_t pte_mkold(pte_t pte) +{ + unsigned long mask; + + __asm__ __volatile__( + "\n661: mov %1, %0\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%2), %0\n" + " sllx %0, 32, %0\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V)); + + mask |= _PAGE_R; + + return __pte(pte_val(pte) & ~mask); +} + +static inline pte_t pte_mkyoung(pte_t pte) +{ + unsigned long mask; + + __asm__ __volatile__( + "\n661: mov %1, %0\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%2), %0\n" + " sllx %0, 32, %0\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V)); + + mask |= _PAGE_R; + + return __pte(pte_val(pte) | mask); +} + +static inline pte_t pte_mkspecial(pte_t pte) +{ + return pte; +} + +static inline unsigned long pte_young(pte_t pte) +{ + unsigned long mask; + + __asm__ __volatile__( + "\n661: mov %1, %0\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%2), %0\n" + " sllx %0, 32, %0\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V)); + + return (pte_val(pte) & mask); +} + +static inline unsigned long pte_dirty(pte_t pte) +{ + unsigned long mask; + + __asm__ __volatile__( + "\n661: mov %1, %0\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%2), %0\n" + " sllx %0, 32, %0\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_MODIFIED_4U), "i" (_PAGE_MODIFIED_4V)); + + return (pte_val(pte) & mask); +} + +static inline unsigned long pte_write(pte_t pte) +{ + unsigned long mask; + + __asm__ __volatile__( + "\n661: mov %1, %0\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%2), %0\n" + " sllx %0, 32, %0\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V)); + + return (pte_val(pte) & mask); +} + +static inline unsigned long pte_exec(pte_t pte) +{ + unsigned long mask; + + __asm__ __volatile__( + "\n661: sethi %%hi(%1), %0\n" + " .section .sun4v_1insn_patch, \"ax\"\n" + " .word 661b\n" + " mov %2, %0\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_EXEC_4U), "i" (_PAGE_EXEC_4V)); + + return (pte_val(pte) & mask); +} + +static inline unsigned long pte_file(pte_t pte) +{ + unsigned long val = pte_val(pte); + + __asm__ __volatile__( + "\n661: and %0, %2, %0\n" + " .section .sun4v_1insn_patch, \"ax\"\n" + " .word 661b\n" + " and %0, %3, %0\n" + " .previous\n" + : "=r" (val) + : "0" (val), "i" (_PAGE_FILE_4U), "i" (_PAGE_FILE_4V)); + + return val; +} + +static inline unsigned long pte_present(pte_t pte) +{ + unsigned long val = pte_val(pte); + + __asm__ __volatile__( + "\n661: and %0, %2, %0\n" + " .section .sun4v_1insn_patch, \"ax\"\n" + " .word 661b\n" + " and %0, %3, %0\n" + " .previous\n" + : "=r" (val) + : "0" (val), "i" (_PAGE_PRESENT_4U), "i" (_PAGE_PRESENT_4V)); + + return val; +} + +static inline int pte_special(pte_t pte) +{ + return 0; +} + +#define pmd_set(pmdp, ptep) \ + (pmd_val(*(pmdp)) = (__pa((unsigned long) (ptep)) >> 11UL)) +#define pud_set(pudp, pmdp) \ + (pud_val(*(pudp)) = (__pa((unsigned long) (pmdp)) >> 11UL)) +#define __pmd_page(pmd) \ + ((unsigned long) __va((((unsigned long)pmd_val(pmd))<<11UL))) +#define pmd_page(pmd) virt_to_page((void *)__pmd_page(pmd)) +#define pud_page_vaddr(pud) \ + ((unsigned long) __va((((unsigned long)pud_val(pud))<<11UL))) +#define pud_page(pud) virt_to_page((void *)pud_page_vaddr(pud)) +#define pmd_none(pmd) (!pmd_val(pmd)) +#define pmd_bad(pmd) (0) +#define pmd_present(pmd) (pmd_val(pmd) != 0U) +#define pmd_clear(pmdp) (pmd_val(*(pmdp)) = 0U) +#define pud_none(pud) (!pud_val(pud)) +#define pud_bad(pud) (0) +#define pud_present(pud) (pud_val(pud) != 0U) +#define pud_clear(pudp) (pud_val(*(pudp)) = 0U) + +/* Same in both SUN4V and SUN4U. */ +#define pte_none(pte) (!pte_val(pte)) + +/* to find an entry in a page-table-directory. */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* Find an entry in the second-level page table.. */ +#define pmd_offset(pudp, address) \ + ((pmd_t *) pud_page_vaddr(*(pudp)) + \ + (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))) + +/* Find an entry in the third-level page table.. */ +#define pte_index(dir, address) \ + ((pte_t *) __pmd_page(*(dir)) + \ + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))) +#define pte_offset_kernel pte_index +#define pte_offset_map pte_index +#define pte_offset_map_nested pte_index +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +/* Actual page table PTE updates. */ +extern void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig); + +static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) +{ + pte_t orig = *ptep; + + *ptep = pte; + + /* It is more efficient to let flush_tlb_kernel_range() + * handle init_mm tlb flushes. + * + * SUN4V NOTE: _PAGE_VALID is the same value in both the SUN4U + * and SUN4V pte layout, so this inline test is fine. + */ + if (likely(mm != &init_mm) && (pte_val(orig) & _PAGE_VALID)) + tlb_batch_add(mm, addr, ptep, orig); +} + +#define pte_clear(mm,addr,ptep) \ + set_pte_at((mm), (addr), (ptep), __pte(0UL)) + +#ifdef DCACHE_ALIASING_POSSIBLE +#define __HAVE_ARCH_MOVE_PTE +#define move_pte(pte, prot, old_addr, new_addr) \ +({ \ + pte_t newpte = (pte); \ + if (tlb_type != hypervisor && pte_present(pte)) { \ + unsigned long this_pfn = pte_pfn(pte); \ + \ + if (pfn_valid(this_pfn) && \ + (((old_addr) ^ (new_addr)) & (1 << 13))) \ + flush_dcache_page_all(current->mm, \ + pfn_to_page(this_pfn)); \ + } \ + newpte; \ +}) +#endif + +extern pgd_t swapper_pg_dir[2048]; +extern pmd_t swapper_low_pmd_dir[2048]; + +extern void paging_init(void); +extern unsigned long find_ecache_flush_span(unsigned long size); + +/* These do nothing with the way I have things setup. */ +#define mmu_lockarea(vaddr, len) (vaddr) +#define mmu_unlockarea(vaddr, len) do { } while(0) + +struct vm_area_struct; +extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t); + +/* Encode and de-code a swap entry */ +#define __swp_type(entry) (((entry).val >> PAGE_SHIFT) & 0xffUL) +#define __swp_offset(entry) ((entry).val >> (PAGE_SHIFT + 8UL)) +#define __swp_entry(type, offset) \ + ( (swp_entry_t) \ + { \ + (((long)(type) << PAGE_SHIFT) | \ + ((long)(offset) << (PAGE_SHIFT + 8UL))) \ + } ) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +/* File offset in PTE support. */ +extern unsigned long pte_file(pte_t); +#define pte_to_pgoff(pte) (pte_val(pte) >> PAGE_SHIFT) +extern pte_t pgoff_to_pte(unsigned long); +#define PTE_FILE_MAX_BITS (64UL - PAGE_SHIFT - 1UL) + +extern unsigned long *sparc64_valid_addr_bitmap; + +/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ +#define kern_addr_valid(addr) \ + (test_bit(__pa((unsigned long)(addr))>>22, sparc64_valid_addr_bitmap)) + +extern int page_in_phys_avail(unsigned long paddr); + +extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, + unsigned long pfn, + unsigned long size, pgprot_t prot); + +/* + * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in + * its high 4 bits. These macros/functions put it there or get it from there. + */ +#define MK_IOSPACE_PFN(space, pfn) (pfn | (space << (BITS_PER_LONG - 4))) +#define GET_IOSPACE(pfn) (pfn >> (BITS_PER_LONG - 4)) +#define GET_PFN(pfn) (pfn & 0x0fffffffffffffffUL) + +#include <asm-generic/pgtable.h> + +/* We provide our own get_unmapped_area to cope with VA holes and + * SHM area cache aliasing for userland. + */ +#define HAVE_ARCH_UNMAPPED_AREA +#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN + +/* We provide a special get_unmapped_area for framebuffer mmaps to try and use + * the largest alignment possible such that larget PTEs can be used. + */ +extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long, + unsigned long, unsigned long, + unsigned long); +#define HAVE_ARCH_FB_UNMAPPED_AREA + +extern void pgtable_cache_init(void); +extern void sun4v_register_fault_status(void); +extern void sun4v_ktsb_register(void); +extern void __init cheetah_ecache_flush_init(void); +extern void sun4v_patch_tlb_handlers(void); + +extern unsigned long cmdline_memory_size; + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_SPARC64_PGTABLE_H) */ diff --git a/arch/sparc/include/asm/pgtsrmmu.h b/arch/sparc/include/asm/pgtsrmmu.h new file mode 100644 index 00000000000..808555fc1d5 --- /dev/null +++ b/arch/sparc/include/asm/pgtsrmmu.h @@ -0,0 +1,298 @@ +/* + * pgtsrmmu.h: SRMMU page table defines and code. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_PGTSRMMU_H +#define _SPARC_PGTSRMMU_H + +#include <asm/page.h> + +#ifdef __ASSEMBLY__ +#include <asm/thread_info.h> /* TI_UWINMASK for WINDOW_FLUSH */ +#endif + +/* Number of contexts is implementation-dependent; 64k is the most we support */ +#define SRMMU_MAX_CONTEXTS 65536 + +/* PMD_SHIFT determines the size of the area a second-level page table entry can map */ +#define SRMMU_REAL_PMD_SHIFT 18 +#define SRMMU_REAL_PMD_SIZE (1UL << SRMMU_REAL_PMD_SHIFT) +#define SRMMU_REAL_PMD_MASK (~(SRMMU_REAL_PMD_SIZE-1)) +#define SRMMU_REAL_PMD_ALIGN(__addr) (((__addr)+SRMMU_REAL_PMD_SIZE-1)&SRMMU_REAL_PMD_MASK) + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#define SRMMU_PGDIR_SHIFT 24 +#define SRMMU_PGDIR_SIZE (1UL << SRMMU_PGDIR_SHIFT) +#define SRMMU_PGDIR_MASK (~(SRMMU_PGDIR_SIZE-1)) +#define SRMMU_PGDIR_ALIGN(addr) (((addr)+SRMMU_PGDIR_SIZE-1)&SRMMU_PGDIR_MASK) + +#define SRMMU_REAL_PTRS_PER_PTE 64 +#define SRMMU_REAL_PTRS_PER_PMD 64 +#define SRMMU_PTRS_PER_PGD 256 + +#define SRMMU_REAL_PTE_TABLE_SIZE (SRMMU_REAL_PTRS_PER_PTE*4) +#define SRMMU_PMD_TABLE_SIZE (SRMMU_REAL_PTRS_PER_PMD*4) +#define SRMMU_PGD_TABLE_SIZE (SRMMU_PTRS_PER_PGD*4) + +/* + * To support pagetables in highmem, Linux introduces APIs which + * return struct page* and generally manipulate page tables when + * they are not mapped into kernel space. Our hardware page tables + * are smaller than pages. We lump hardware tabes into big, page sized + * software tables. + * + * PMD_SHIFT determines the size of the area a second-level page table entry + * can map, and our pmd_t is 16 times larger than normal. The values which + * were once defined here are now generic for 4c and srmmu, so they're + * found in pgtable.h. + */ +#define SRMMU_PTRS_PER_PMD 4 + +/* Definition of the values in the ET field of PTD's and PTE's */ +#define SRMMU_ET_MASK 0x3 +#define SRMMU_ET_INVALID 0x0 +#define SRMMU_ET_PTD 0x1 +#define SRMMU_ET_PTE 0x2 +#define SRMMU_ET_REPTE 0x3 /* AIEEE, SuperSparc II reverse endian page! */ + +/* Physical page extraction from PTP's and PTE's. */ +#define SRMMU_CTX_PMASK 0xfffffff0 +#define SRMMU_PTD_PMASK 0xfffffff0 +#define SRMMU_PTE_PMASK 0xffffff00 + +/* The pte non-page bits. Some notes: + * 1) cache, dirty, valid, and ref are frobbable + * for both supervisor and user pages. + * 2) exec and write will only give the desired effect + * on user pages + * 3) use priv and priv_readonly for changing the + * characteristics of supervisor ptes + */ +#define SRMMU_CACHE 0x80 +#define SRMMU_DIRTY 0x40 +#define SRMMU_REF 0x20 +#define SRMMU_NOREAD 0x10 +#define SRMMU_EXEC 0x08 +#define SRMMU_WRITE 0x04 +#define SRMMU_VALID 0x02 /* SRMMU_ET_PTE */ +#define SRMMU_PRIV 0x1c +#define SRMMU_PRIV_RDONLY 0x18 + +#define SRMMU_FILE 0x40 /* Implemented in software */ + +#define SRMMU_PTE_FILE_SHIFT 8 /* == 32-PTE_FILE_MAX_BITS */ + +#define SRMMU_CHG_MASK (0xffffff00 | SRMMU_REF | SRMMU_DIRTY) + +/* SRMMU swap entry encoding + * + * We use 5 bits for the type and 19 for the offset. This gives us + * 32 swapfiles of 4GB each. Encoding looks like: + * + * oooooooooooooooooootttttRRRRRRRR + * fedcba9876543210fedcba9876543210 + * + * The bottom 8 bits are reserved for protection and status bits, especially + * FILE and PRESENT. + */ +#define SRMMU_SWP_TYPE_MASK 0x1f +#define SRMMU_SWP_TYPE_SHIFT SRMMU_PTE_FILE_SHIFT +#define SRMMU_SWP_OFF_MASK 0x7ffff +#define SRMMU_SWP_OFF_SHIFT (SRMMU_PTE_FILE_SHIFT + 5) + +/* Some day I will implement true fine grained access bits for + * user pages because the SRMMU gives us the capabilities to + * enforce all the protection levels that vma's can have. + * XXX But for now... + */ +#define SRMMU_PAGE_NONE __pgprot(SRMMU_CACHE | \ + SRMMU_PRIV | SRMMU_REF) +#define SRMMU_PAGE_SHARED __pgprot(SRMMU_VALID | SRMMU_CACHE | \ + SRMMU_EXEC | SRMMU_WRITE | SRMMU_REF) +#define SRMMU_PAGE_COPY __pgprot(SRMMU_VALID | SRMMU_CACHE | \ + SRMMU_EXEC | SRMMU_REF) +#define SRMMU_PAGE_RDONLY __pgprot(SRMMU_VALID | SRMMU_CACHE | \ + SRMMU_EXEC | SRMMU_REF) +#define SRMMU_PAGE_KERNEL __pgprot(SRMMU_VALID | SRMMU_CACHE | SRMMU_PRIV | \ + SRMMU_DIRTY | SRMMU_REF) + +/* SRMMU Register addresses in ASI 0x4. These are valid for all + * current SRMMU implementations that exist. + */ +#define SRMMU_CTRL_REG 0x00000000 +#define SRMMU_CTXTBL_PTR 0x00000100 +#define SRMMU_CTX_REG 0x00000200 +#define SRMMU_FAULT_STATUS 0x00000300 +#define SRMMU_FAULT_ADDR 0x00000400 + +#define WINDOW_FLUSH(tmp1, tmp2) \ + mov 0, tmp1; \ +98: ld [%g6 + TI_UWINMASK], tmp2; \ + orcc %g0, tmp2, %g0; \ + add tmp1, 1, tmp1; \ + bne 98b; \ + save %sp, -64, %sp; \ +99: subcc tmp1, 1, tmp1; \ + bne 99b; \ + restore %g0, %g0, %g0; + +#ifndef __ASSEMBLY__ + +/* This makes sense. Honest it does - Anton */ +/* XXX Yes but it's ugly as sin. FIXME. -KMW */ +extern void *srmmu_nocache_pool; +#define __nocache_pa(VADDR) (((unsigned long)VADDR) - SRMMU_NOCACHE_VADDR + __pa((unsigned long)srmmu_nocache_pool)) +#define __nocache_va(PADDR) (__va((unsigned long)PADDR) - (unsigned long)srmmu_nocache_pool + SRMMU_NOCACHE_VADDR) +#define __nocache_fix(VADDR) __va(__nocache_pa(VADDR)) + +/* Accessing the MMU control register. */ +static inline unsigned int srmmu_get_mmureg(void) +{ + unsigned int retval; + __asm__ __volatile__("lda [%%g0] %1, %0\n\t" : + "=r" (retval) : + "i" (ASI_M_MMUREGS)); + return retval; +} + +static inline void srmmu_set_mmureg(unsigned long regval) +{ + __asm__ __volatile__("sta %0, [%%g0] %1\n\t" : : + "r" (regval), "i" (ASI_M_MMUREGS) : "memory"); + +} + +static inline void srmmu_set_ctable_ptr(unsigned long paddr) +{ + paddr = ((paddr >> 4) & SRMMU_CTX_PMASK); + __asm__ __volatile__("sta %0, [%1] %2\n\t" : : + "r" (paddr), "r" (SRMMU_CTXTBL_PTR), + "i" (ASI_M_MMUREGS) : + "memory"); +} + +static inline unsigned long srmmu_get_ctable_ptr(void) +{ + unsigned int retval; + + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (retval) : + "r" (SRMMU_CTXTBL_PTR), + "i" (ASI_M_MMUREGS)); + return (retval & SRMMU_CTX_PMASK) << 4; +} + +static inline void srmmu_set_context(int context) +{ + __asm__ __volatile__("sta %0, [%1] %2\n\t" : : + "r" (context), "r" (SRMMU_CTX_REG), + "i" (ASI_M_MMUREGS) : "memory"); +} + +static inline int srmmu_get_context(void) +{ + register int retval; + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (retval) : + "r" (SRMMU_CTX_REG), + "i" (ASI_M_MMUREGS)); + return retval; +} + +static inline unsigned int srmmu_get_fstatus(void) +{ + unsigned int retval; + + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (retval) : + "r" (SRMMU_FAULT_STATUS), "i" (ASI_M_MMUREGS)); + return retval; +} + +static inline unsigned int srmmu_get_faddr(void) +{ + unsigned int retval; + + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (retval) : + "r" (SRMMU_FAULT_ADDR), "i" (ASI_M_MMUREGS)); + return retval; +} + +/* This is guaranteed on all SRMMU's. */ +static inline void srmmu_flush_whole_tlb(void) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : + "r" (0x400), /* Flush entire TLB!! */ + "i" (ASI_M_FLUSH_PROBE) : "memory"); + +} + +/* These flush types are not available on all chips... */ +static inline void srmmu_flush_tlb_ctx(void) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : + "r" (0x300), /* Flush TLB ctx.. */ + "i" (ASI_M_FLUSH_PROBE) : "memory"); + +} + +static inline void srmmu_flush_tlb_region(unsigned long addr) +{ + addr &= SRMMU_PGDIR_MASK; + __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : + "r" (addr | 0x200), /* Flush TLB region.. */ + "i" (ASI_M_FLUSH_PROBE) : "memory"); + +} + + +static inline void srmmu_flush_tlb_segment(unsigned long addr) +{ + addr &= SRMMU_REAL_PMD_MASK; + __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : + "r" (addr | 0x100), /* Flush TLB segment.. */ + "i" (ASI_M_FLUSH_PROBE) : "memory"); + +} + +static inline void srmmu_flush_tlb_page(unsigned long page) +{ + page &= PAGE_MASK; + __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : + "r" (page), /* Flush TLB page.. */ + "i" (ASI_M_FLUSH_PROBE) : "memory"); + +} + +static inline unsigned long srmmu_hwprobe(unsigned long vaddr) +{ + unsigned long retval; + + vaddr &= PAGE_MASK; + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (retval) : + "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE)); + + return retval; +} + +static inline int +srmmu_get_pte (unsigned long addr) +{ + register unsigned long entry; + + __asm__ __volatile__("\n\tlda [%1] %2,%0\n\t" : + "=r" (entry): + "r" ((addr & 0xfffff000) | 0x400), "i" (ASI_M_FLUSH_PROBE)); + return entry; +} + +extern unsigned long (*srmmu_read_physical)(unsigned long paddr); +extern void (*srmmu_write_physical)(unsigned long paddr, unsigned long word); + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_SPARC_PGTSRMMU_H) */ diff --git a/arch/sparc/include/asm/pgtsun4.h b/arch/sparc/include/asm/pgtsun4.h new file mode 100644 index 00000000000..5a0d661fb82 --- /dev/null +++ b/arch/sparc/include/asm/pgtsun4.h @@ -0,0 +1,171 @@ +/* + * pgtsun4.h: Sun4 specific pgtable.h defines and code. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ +#ifndef _SPARC_PGTSUN4C_H +#define _SPARC_PGTSUN4C_H + +#include <asm/contregs.h> + +/* PMD_SHIFT determines the size of the area a second-level page table can map */ +#define SUN4C_PMD_SHIFT 23 + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#define SUN4C_PGDIR_SHIFT 23 +#define SUN4C_PGDIR_SIZE (1UL << SUN4C_PGDIR_SHIFT) +#define SUN4C_PGDIR_MASK (~(SUN4C_PGDIR_SIZE-1)) +#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK) + +/* To represent how the sun4c mmu really lays things out. */ +#define SUN4C_REAL_PGDIR_SHIFT 18 +#define SUN4C_REAL_PGDIR_SIZE (1UL << SUN4C_REAL_PGDIR_SHIFT) +#define SUN4C_REAL_PGDIR_MASK (~(SUN4C_REAL_PGDIR_SIZE-1)) +#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK) + +/* 19 bit PFN on sun4 */ +#define SUN4C_PFN_MASK 0x7ffff + +/* Don't increase these unless the structures in sun4c.c are fixed */ +#define SUN4C_MAX_SEGMAPS 256 +#define SUN4C_MAX_CONTEXTS 16 + +/* + * To be efficient, and not have to worry about allocating such + * a huge pgd, we make the kernel sun4c tables each hold 1024 + * entries and the pgd similarly just like the i386 tables. + */ +#define SUN4C_PTRS_PER_PTE 1024 +#define SUN4C_PTRS_PER_PMD 1 +#define SUN4C_PTRS_PER_PGD 1024 + +/* + * Sparc SUN4C pte fields. + */ +#define _SUN4C_PAGE_VALID 0x80000000 +#define _SUN4C_PAGE_SILENT_READ 0x80000000 /* synonym */ +#define _SUN4C_PAGE_DIRTY 0x40000000 +#define _SUN4C_PAGE_SILENT_WRITE 0x40000000 /* synonym */ +#define _SUN4C_PAGE_PRIV 0x20000000 /* privileged page */ +#define _SUN4C_PAGE_NOCACHE 0x10000000 /* non-cacheable page */ +#define _SUN4C_PAGE_PRESENT 0x08000000 /* implemented in software */ +#define _SUN4C_PAGE_IO 0x04000000 /* I/O page */ +#define _SUN4C_PAGE_FILE 0x02000000 /* implemented in software */ +#define _SUN4C_PAGE_READ 0x00800000 /* implemented in software */ +#define _SUN4C_PAGE_WRITE 0x00400000 /* implemented in software */ +#define _SUN4C_PAGE_ACCESSED 0x00200000 /* implemented in software */ +#define _SUN4C_PAGE_MODIFIED 0x00100000 /* implemented in software */ + +#define _SUN4C_READABLE (_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\ + _SUN4C_PAGE_ACCESSED) +#define _SUN4C_WRITEABLE (_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\ + _SUN4C_PAGE_MODIFIED) + +#define _SUN4C_PAGE_CHG_MASK (0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED) + +#define SUN4C_PAGE_NONE __pgprot(_SUN4C_PAGE_PRESENT) +#define SUN4C_PAGE_SHARED __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\ + _SUN4C_PAGE_WRITE) +#define SUN4C_PAGE_COPY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE) +#define SUN4C_PAGE_READONLY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE) +#define SUN4C_PAGE_KERNEL __pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\ + _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV) + +/* SUN4C swap entry encoding + * + * We use 5 bits for the type and 19 for the offset. This gives us + * 32 swapfiles of 4GB each. Encoding looks like: + * + * RRRRRRRRooooooooooooooooooottttt + * fedcba9876543210fedcba9876543210 + * + * The top 8 bits are reserved for protection and status bits, especially + * FILE and PRESENT. + */ +#define SUN4C_SWP_TYPE_MASK 0x1f +#define SUN4C_SWP_OFF_MASK 0x7ffff +#define SUN4C_SWP_OFF_SHIFT 5 + +#ifndef __ASSEMBLY__ + +static inline unsigned long sun4c_get_synchronous_error(void) +{ + unsigned long sync_err; + + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (sync_err) : + "r" (AC_SYNC_ERR), "i" (ASI_CONTROL)); + return sync_err; +} + +static inline unsigned long sun4c_get_synchronous_address(void) +{ + unsigned long sync_addr; + + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (sync_addr) : + "r" (AC_SYNC_VA), "i" (ASI_CONTROL)); + return sync_addr; +} + +/* SUN4 pte, segmap, and context manipulation */ +static inline unsigned long sun4c_get_segmap(unsigned long addr) +{ + register unsigned long entry; + + __asm__ __volatile__("\n\tlduha [%1] %2, %0\n\t" : + "=r" (entry) : + "r" (addr), "i" (ASI_SEGMAP)); + return entry; +} + +static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry) +{ + __asm__ __volatile__("\n\tstha %1, [%0] %2; nop; nop; nop;\n\t" : : + "r" (addr), "r" (entry), + "i" (ASI_SEGMAP) + : "memory"); +} + +static inline unsigned long sun4c_get_pte(unsigned long addr) +{ + register unsigned long entry; + + __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : + "=r" (entry) : + "r" (addr), "i" (ASI_PTE)); + return entry; +} + +static inline void sun4c_put_pte(unsigned long addr, unsigned long entry) +{ + __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : : + "r" (addr), + "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE) + : "memory"); +} + +static inline int sun4c_get_context(void) +{ + register int ctx; + + __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" : + "=r" (ctx) : + "r" (AC_CONTEXT), "i" (ASI_CONTROL)); + + return ctx; +} + +static inline int sun4c_set_context(int ctx) +{ + __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : : + "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL) + : "memory"); + + return ctx; +} + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_SPARC_PGTSUN4_H) */ diff --git a/arch/sparc/include/asm/pgtsun4c.h b/arch/sparc/include/asm/pgtsun4c.h new file mode 100644 index 00000000000..aeb25e91217 --- /dev/null +++ b/arch/sparc/include/asm/pgtsun4c.h @@ -0,0 +1,172 @@ +/* + * pgtsun4c.h: Sun4c specific pgtable.h defines and code. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ +#ifndef _SPARC_PGTSUN4C_H +#define _SPARC_PGTSUN4C_H + +#include <asm/contregs.h> + +/* PMD_SHIFT determines the size of the area a second-level page table can map */ +#define SUN4C_PMD_SHIFT 22 + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#define SUN4C_PGDIR_SHIFT 22 +#define SUN4C_PGDIR_SIZE (1UL << SUN4C_PGDIR_SHIFT) +#define SUN4C_PGDIR_MASK (~(SUN4C_PGDIR_SIZE-1)) +#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK) + +/* To represent how the sun4c mmu really lays things out. */ +#define SUN4C_REAL_PGDIR_SHIFT 18 +#define SUN4C_REAL_PGDIR_SIZE (1UL << SUN4C_REAL_PGDIR_SHIFT) +#define SUN4C_REAL_PGDIR_MASK (~(SUN4C_REAL_PGDIR_SIZE-1)) +#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK) + +/* 16 bit PFN on sun4c */ +#define SUN4C_PFN_MASK 0xffff + +/* Don't increase these unless the structures in sun4c.c are fixed */ +#define SUN4C_MAX_SEGMAPS 256 +#define SUN4C_MAX_CONTEXTS 16 + +/* + * To be efficient, and not have to worry about allocating such + * a huge pgd, we make the kernel sun4c tables each hold 1024 + * entries and the pgd similarly just like the i386 tables. + */ +#define SUN4C_PTRS_PER_PTE 1024 +#define SUN4C_PTRS_PER_PMD 1 +#define SUN4C_PTRS_PER_PGD 1024 + +/* + * Sparc SUN4C pte fields. + */ +#define _SUN4C_PAGE_VALID 0x80000000 +#define _SUN4C_PAGE_SILENT_READ 0x80000000 /* synonym */ +#define _SUN4C_PAGE_DIRTY 0x40000000 +#define _SUN4C_PAGE_SILENT_WRITE 0x40000000 /* synonym */ +#define _SUN4C_PAGE_PRIV 0x20000000 /* privileged page */ +#define _SUN4C_PAGE_NOCACHE 0x10000000 /* non-cacheable page */ +#define _SUN4C_PAGE_PRESENT 0x08000000 /* implemented in software */ +#define _SUN4C_PAGE_IO 0x04000000 /* I/O page */ +#define _SUN4C_PAGE_FILE 0x02000000 /* implemented in software */ +#define _SUN4C_PAGE_READ 0x00800000 /* implemented in software */ +#define _SUN4C_PAGE_WRITE 0x00400000 /* implemented in software */ +#define _SUN4C_PAGE_ACCESSED 0x00200000 /* implemented in software */ +#define _SUN4C_PAGE_MODIFIED 0x00100000 /* implemented in software */ + +#define _SUN4C_READABLE (_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\ + _SUN4C_PAGE_ACCESSED) +#define _SUN4C_WRITEABLE (_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\ + _SUN4C_PAGE_MODIFIED) + +#define _SUN4C_PAGE_CHG_MASK (0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED) + +#define SUN4C_PAGE_NONE __pgprot(_SUN4C_PAGE_PRESENT) +#define SUN4C_PAGE_SHARED __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\ + _SUN4C_PAGE_WRITE) +#define SUN4C_PAGE_COPY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE) +#define SUN4C_PAGE_READONLY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE) +#define SUN4C_PAGE_KERNEL __pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\ + _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV) + +/* SUN4C swap entry encoding + * + * We use 5 bits for the type and 19 for the offset. This gives us + * 32 swapfiles of 4GB each. Encoding looks like: + * + * RRRRRRRRooooooooooooooooooottttt + * fedcba9876543210fedcba9876543210 + * + * The top 8 bits are reserved for protection and status bits, especially + * FILE and PRESENT. + */ +#define SUN4C_SWP_TYPE_MASK 0x1f +#define SUN4C_SWP_OFF_MASK 0x7ffff +#define SUN4C_SWP_OFF_SHIFT 5 + +#ifndef __ASSEMBLY__ + +static inline unsigned long sun4c_get_synchronous_error(void) +{ + unsigned long sync_err; + + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (sync_err) : + "r" (AC_SYNC_ERR), "i" (ASI_CONTROL)); + return sync_err; +} + +static inline unsigned long sun4c_get_synchronous_address(void) +{ + unsigned long sync_addr; + + __asm__ __volatile__("lda [%1] %2, %0\n\t" : + "=r" (sync_addr) : + "r" (AC_SYNC_VA), "i" (ASI_CONTROL)); + return sync_addr; +} + +/* SUN4C pte, segmap, and context manipulation */ +static inline unsigned long sun4c_get_segmap(unsigned long addr) +{ + register unsigned long entry; + + __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" : + "=r" (entry) : + "r" (addr), "i" (ASI_SEGMAP)); + + return entry; +} + +static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry) +{ + + __asm__ __volatile__("\n\tstba %1, [%0] %2; nop; nop; nop;\n\t" : : + "r" (addr), "r" (entry), + "i" (ASI_SEGMAP) + : "memory"); +} + +static inline unsigned long sun4c_get_pte(unsigned long addr) +{ + register unsigned long entry; + + __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : + "=r" (entry) : + "r" (addr), "i" (ASI_PTE)); + return entry; +} + +static inline void sun4c_put_pte(unsigned long addr, unsigned long entry) +{ + __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : : + "r" (addr), + "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE) + : "memory"); +} + +static inline int sun4c_get_context(void) +{ + register int ctx; + + __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" : + "=r" (ctx) : + "r" (AC_CONTEXT), "i" (ASI_CONTROL)); + + return ctx; +} + +static inline int sun4c_set_context(int ctx) +{ + __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : : + "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL) + : "memory"); + + return ctx; +} + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_SPARC_PGTSUN4C_H) */ diff --git a/arch/sparc/include/asm/pil.h b/arch/sparc/include/asm/pil.h new file mode 100644 index 00000000000..71819bb943f --- /dev/null +++ b/arch/sparc/include/asm/pil.h @@ -0,0 +1,22 @@ +#ifndef _SPARC64_PIL_H +#define _SPARC64_PIL_H + +/* To avoid some locking problems, we hard allocate certain PILs + * for SMP cross call messages that must do a etrap/rtrap. + * + * A local_irq_disable() does not block the cross call delivery, so + * when SMP locking is an issue we reschedule the event into a PIL + * interrupt which is blocked by local_irq_disable(). + * + * In fact any XCALL which has to etrap/rtrap has a problem because + * it is difficult to prevent rtrap from running BH's, and that would + * need to be done if the XCALL arrived while %pil==15. + */ +#define PIL_SMP_CALL_FUNC 1 +#define PIL_SMP_RECEIVE_SIGNAL 2 +#define PIL_SMP_CAPTURE 3 +#define PIL_SMP_CTX_NEW_VERSION 4 +#define PIL_DEVICE_IRQ 5 +#define PIL_SMP_CALL_FUNC_SNGL 6 + +#endif /* !(_SPARC64_PIL_H) */ diff --git a/arch/sparc/include/asm/poll.h b/arch/sparc/include/asm/poll.h new file mode 100644 index 00000000000..091d3ad2e83 --- /dev/null +++ b/arch/sparc/include/asm/poll.h @@ -0,0 +1,12 @@ +#ifndef __SPARC_POLL_H +#define __SPARC_POLL_H + +#define POLLWRNORM POLLOUT +#define POLLWRBAND 256 +#define POLLMSG 512 +#define POLLREMOVE 1024 +#define POLLRDHUP 2048 + +#include <asm-generic/poll.h> + +#endif diff --git a/arch/sparc/include/asm/posix_types.h b/arch/sparc/include/asm/posix_types.h new file mode 100644 index 00000000000..03a0e091a88 --- /dev/null +++ b/arch/sparc/include/asm/posix_types.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_POSIX_TYPES_H +#define ___ASM_SPARC_POSIX_TYPES_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/posix_types_64.h> +#else +#include <asm/posix_types_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/posix_types_32.h b/arch/sparc/include/asm/posix_types_32.h new file mode 100644 index 00000000000..6bb6eb1ca0f --- /dev/null +++ b/arch/sparc/include/asm/posix_types_32.h @@ -0,0 +1,118 @@ +#ifndef __ARCH_SPARC_POSIX_TYPES_H +#define __ARCH_SPARC_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef long int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_umode_t; +typedef short __kernel_nlink_t; +typedef long __kernel_daddr_t; +typedef long __kernel_off_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; +typedef int __kernel_clockid_t; +typedef int __kernel_timer_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#if defined(__KERNEL__) + +#undef __FD_SET +static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] |= (1UL<<_rem); +} + +#undef __FD_CLR +static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); +} + +#undef __FD_ISSET +static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant cases (8 or 32 longs, + * for 256 and 1024-bit fd_sets respectively) + */ +#undef __FD_ZERO +static inline void __FD_ZERO(__kernel_fd_set *p) +{ + unsigned long *tmp = p->fds_bits; + int i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 32: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; + tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0; + tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0; + tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0; + tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0; + tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0; + tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0; + return; + case 16: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; + tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0; + tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0; + return; + case 8: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; + return; + case 4: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + return; + } + } + i = __FDSET_LONGS; + while (i) { + i--; + *tmp = 0; + tmp++; + } +} + +#endif /* defined(__KERNEL__) */ + +#endif /* !(__ARCH_SPARC_POSIX_TYPES_H) */ diff --git a/arch/sparc/include/asm/posix_types_64.h b/arch/sparc/include/asm/posix_types_64.h new file mode 100644 index 00000000000..ba8f9329576 --- /dev/null +++ b/arch/sparc/include/asm/posix_types_64.h @@ -0,0 +1,122 @@ +#ifndef __ARCH_SPARC64_POSIX_TYPES_H +#define __ARCH_SPARC64_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; +typedef long __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_clock_t; +typedef int __kernel_pid_t; +typedef int __kernel_ipc_pid_t; +typedef unsigned int __kernel_uid_t; +typedef unsigned int __kernel_gid_t; +typedef unsigned long __kernel_ino_t; +typedef unsigned int __kernel_mode_t; +typedef unsigned short __kernel_umode_t; +typedef unsigned int __kernel_nlink_t; +typedef int __kernel_daddr_t; +typedef long __kernel_off_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef int __kernel_clockid_t; +typedef int __kernel_timer_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef __kernel_uid_t __kernel_uid32_t; +typedef __kernel_gid_t __kernel_gid32_t; + +typedef unsigned int __kernel_old_dev_t; + +/* Note this piece of asymmetry from the v9 ABI. */ +typedef int __kernel_suseconds_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { + int val[2]; +} __kernel_fsid_t; + +#if defined(__KERNEL__) + +#undef __FD_SET +static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] |= (1UL<<_rem); +} + +#undef __FD_CLR +static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); +} + +#undef __FD_ISSET +static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p) +{ + unsigned long _tmp = fd / __NFDBITS; + unsigned long _rem = fd % __NFDBITS; + return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant cases (8 or 32 longs, + * for 256 and 1024-bit fd_sets respectively) + */ +#undef __FD_ZERO +static inline void __FD_ZERO(__kernel_fd_set *p) +{ + unsigned long *tmp = p->fds_bits; + int i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 32: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; + tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0; + tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0; + tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0; + tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0; + tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0; + tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0; + return; + case 16: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; + tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0; + tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0; + return; + case 8: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; + return; + case 4: + tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; + return; + } + } + i = __FDSET_LONGS; + while (i) { + i--; + *tmp = 0; + tmp++; + } +} + +#endif /* defined(__KERNEL__) */ + +#endif /* !(__ARCH_SPARC64_POSIX_TYPES_H) */ diff --git a/arch/sparc/include/asm/processor.h b/arch/sparc/include/asm/processor.h new file mode 100644 index 00000000000..9da9646bf6c --- /dev/null +++ b/arch/sparc/include/asm/processor.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_PROCESSOR_H +#define ___ASM_SPARC_PROCESSOR_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/processor_64.h> +#else +#include <asm/processor_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/processor_32.h b/arch/sparc/include/asm/processor_32.h new file mode 100644 index 00000000000..2ae67a2e7f3 --- /dev/null +++ b/arch/sparc/include/asm/processor_32.h @@ -0,0 +1,129 @@ +/* include/asm/processor.h + * + * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef __ASM_SPARC_PROCESSOR_H +#define __ASM_SPARC_PROCESSOR_H + +/* + * Sparc32 implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ void *pc; __asm__("sethi %%hi(1f), %0; or %0, %%lo(1f), %0;\n1:" : "=r" (pc)); pc; }) + +#include <asm/psr.h> +#include <asm/ptrace.h> +#include <asm/head.h> +#include <asm/signal.h> +#include <asm/btfixup.h> +#include <asm/page.h> + +/* + * The sparc has no problems with write protection + */ +#define wp_works_ok 1 +#define wp_works_ok__is_a_macro /* for versions in ksyms.c */ + +/* Whee, this is STACK_TOP + PAGE_SIZE and the lowest kernel address too... + * That one page is used to protect kernel from intruders, so that + * we can make our access_ok test faster + */ +#define TASK_SIZE PAGE_OFFSET +#ifdef __KERNEL__ +#define STACK_TOP (PAGE_OFFSET - PAGE_SIZE) +#define STACK_TOP_MAX STACK_TOP +#endif /* __KERNEL__ */ + +struct task_struct; + +#ifdef __KERNEL__ +struct fpq { + unsigned long *insn_addr; + unsigned long insn; +}; +#endif + +typedef struct { + int seg; +} mm_segment_t; + +/* The Sparc processor specific thread struct. */ +struct thread_struct { + struct pt_regs *kregs; + unsigned int _pad1; + + /* Special child fork kpsr/kwim values. */ + unsigned long fork_kpsr __attribute__ ((aligned (8))); + unsigned long fork_kwim; + + /* Floating point regs */ + unsigned long float_regs[32] __attribute__ ((aligned (8))); + unsigned long fsr; + unsigned long fpqdepth; + struct fpq fpqueue[16]; + unsigned long flags; + mm_segment_t current_ds; +}; + +#define SPARC_FLAG_KTHREAD 0x1 /* task is a kernel thread */ +#define SPARC_FLAG_UNALIGNED 0x2 /* is allowed to do unaligned accesses */ + +#define INIT_THREAD { \ + .flags = SPARC_FLAG_KTHREAD, \ + .current_ds = KERNEL_DS, \ +} + +/* Return saved PC of a blocked thread. */ +extern unsigned long thread_saved_pc(struct task_struct *t); + +/* Do necessary setup to start up a newly executed thread. */ +static inline void start_thread(struct pt_regs * regs, unsigned long pc, + unsigned long sp) +{ + register unsigned long zero asm("g1"); + + regs->psr = (regs->psr & (PSR_CWP)) | PSR_S; + regs->pc = ((pc & (~3)) - 4); + regs->npc = regs->pc + 4; + regs->y = 0; + zero = 0; + __asm__ __volatile__("std\t%%g0, [%0 + %3 + 0x00]\n\t" + "std\t%%g0, [%0 + %3 + 0x08]\n\t" + "std\t%%g0, [%0 + %3 + 0x10]\n\t" + "std\t%%g0, [%0 + %3 + 0x18]\n\t" + "std\t%%g0, [%0 + %3 + 0x20]\n\t" + "std\t%%g0, [%0 + %3 + 0x28]\n\t" + "std\t%%g0, [%0 + %3 + 0x30]\n\t" + "st\t%1, [%0 + %3 + 0x38]\n\t" + "st\t%%g0, [%0 + %3 + 0x3c]" + : /* no outputs */ + : "r" (regs), + "r" (sp - sizeof(struct reg_window)), + "r" (zero), + "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0])) + : "memory"); +} + +/* Free all resources held by a thread. */ +#define release_thread(tsk) do { } while(0) +extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +extern unsigned long get_wchan(struct task_struct *); + +#define task_pt_regs(tsk) ((tsk)->thread.kregs) +#define KSTK_EIP(tsk) ((tsk)->thread.kregs->pc) +#define KSTK_ESP(tsk) ((tsk)->thread.kregs->u_regs[UREG_FP]) + +#ifdef __KERNEL__ + +extern struct task_struct *last_task_used_math; + +#define cpu_relax() barrier() + +#endif + +#endif /* __ASM_SPARC_PROCESSOR_H */ diff --git a/arch/sparc/include/asm/processor_64.h b/arch/sparc/include/asm/processor_64.h new file mode 100644 index 00000000000..137a6bd72fc --- /dev/null +++ b/arch/sparc/include/asm/processor_64.h @@ -0,0 +1,237 @@ +/* + * include/asm/processor.h + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef __ASM_SPARC64_PROCESSOR_H +#define __ASM_SPARC64_PROCESSOR_H + +/* + * Sparc64 implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ void *pc; __asm__("rd %%pc, %0" : "=r" (pc)); pc; }) + +#include <asm/asi.h> +#include <asm/pstate.h> +#include <asm/ptrace.h> +#include <asm/page.h> + +/* The sparc has no problems with write protection */ +#define wp_works_ok 1 +#define wp_works_ok__is_a_macro /* for versions in ksyms.c */ + +/* + * User lives in his very own context, and cannot reference us. Note + * that TASK_SIZE is a misnomer, it really gives maximum user virtual + * address that the kernel will allocate out. + * + * XXX No longer using virtual page tables, kill this upper limit... + */ +#define VA_BITS 44 +#ifndef __ASSEMBLY__ +#define VPTE_SIZE (1UL << (VA_BITS - PAGE_SHIFT + 3)) +#else +#define VPTE_SIZE (1 << (VA_BITS - PAGE_SHIFT + 3)) +#endif + +#define TASK_SIZE ((unsigned long)-VPTE_SIZE) +#define TASK_SIZE_OF(tsk) \ + (test_tsk_thread_flag(tsk,TIF_32BIT) ? \ + (1UL << 32UL) : TASK_SIZE) +#ifdef __KERNEL__ + +#define STACK_TOP32 ((1UL << 32UL) - PAGE_SIZE) +#define STACK_TOP64 (0x0000080000000000UL - (1UL << 32UL)) + +#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \ + STACK_TOP32 : STACK_TOP64) + +#define STACK_TOP_MAX STACK_TOP64 + +#endif + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned char seg; +} mm_segment_t; + +/* The Sparc processor specific thread struct. */ +/* XXX This should die, everything can go into thread_info now. */ +struct thread_struct { +#ifdef CONFIG_DEBUG_SPINLOCK + /* How many spinlocks held by this thread. + * Used with spin lock debugging to catch tasks + * sleeping illegally with locks held. + */ + int smp_lock_count; + unsigned int smp_lock_pc; +#else + int dummy; /* f'in gcc bug... */ +#endif +}; + +#endif /* !(__ASSEMBLY__) */ + +#ifndef CONFIG_DEBUG_SPINLOCK +#define INIT_THREAD { \ + 0, \ +} +#else /* CONFIG_DEBUG_SPINLOCK */ +#define INIT_THREAD { \ +/* smp_lock_count, smp_lock_pc, */ \ + 0, 0, \ +} +#endif /* !(CONFIG_DEBUG_SPINLOCK) */ + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> + +/* Return saved PC of a blocked thread. */ +struct task_struct; +extern unsigned long thread_saved_pc(struct task_struct *); + +/* On Uniprocessor, even in RMO processes see TSO semantics */ +#ifdef CONFIG_SMP +#define TSTATE_INITIAL_MM TSTATE_TSO +#else +#define TSTATE_INITIAL_MM TSTATE_RMO +#endif + +/* Do necessary setup to start up a newly executed thread. */ +#define start_thread(regs, pc, sp) \ +do { \ + unsigned long __asi = ASI_PNF; \ + regs->tstate = (regs->tstate & (TSTATE_CWP)) | (TSTATE_INITIAL_MM|TSTATE_IE) | (__asi << 24UL); \ + regs->tpc = ((pc & (~3)) - 4); \ + regs->tnpc = regs->tpc + 4; \ + regs->y = 0; \ + set_thread_wstate(1 << 3); \ + if (current_thread_info()->utraps) { \ + if (*(current_thread_info()->utraps) < 2) \ + kfree(current_thread_info()->utraps); \ + else \ + (*(current_thread_info()->utraps))--; \ + current_thread_info()->utraps = NULL; \ + } \ + __asm__ __volatile__( \ + "stx %%g0, [%0 + %2 + 0x00]\n\t" \ + "stx %%g0, [%0 + %2 + 0x08]\n\t" \ + "stx %%g0, [%0 + %2 + 0x10]\n\t" \ + "stx %%g0, [%0 + %2 + 0x18]\n\t" \ + "stx %%g0, [%0 + %2 + 0x20]\n\t" \ + "stx %%g0, [%0 + %2 + 0x28]\n\t" \ + "stx %%g0, [%0 + %2 + 0x30]\n\t" \ + "stx %%g0, [%0 + %2 + 0x38]\n\t" \ + "stx %%g0, [%0 + %2 + 0x40]\n\t" \ + "stx %%g0, [%0 + %2 + 0x48]\n\t" \ + "stx %%g0, [%0 + %2 + 0x50]\n\t" \ + "stx %%g0, [%0 + %2 + 0x58]\n\t" \ + "stx %%g0, [%0 + %2 + 0x60]\n\t" \ + "stx %%g0, [%0 + %2 + 0x68]\n\t" \ + "stx %1, [%0 + %2 + 0x70]\n\t" \ + "stx %%g0, [%0 + %2 + 0x78]\n\t" \ + "wrpr %%g0, (1 << 3), %%wstate\n\t" \ + : \ + : "r" (regs), "r" (sp - sizeof(struct reg_window) - STACK_BIAS), \ + "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \ +} while (0) + +#define start_thread32(regs, pc, sp) \ +do { \ + unsigned long __asi = ASI_PNF; \ + pc &= 0x00000000ffffffffUL; \ + sp &= 0x00000000ffffffffUL; \ + regs->tstate = (regs->tstate & (TSTATE_CWP))|(TSTATE_INITIAL_MM|TSTATE_IE|TSTATE_AM) | (__asi << 24UL); \ + regs->tpc = ((pc & (~3)) - 4); \ + regs->tnpc = regs->tpc + 4; \ + regs->y = 0; \ + set_thread_wstate(2 << 3); \ + if (current_thread_info()->utraps) { \ + if (*(current_thread_info()->utraps) < 2) \ + kfree(current_thread_info()->utraps); \ + else \ + (*(current_thread_info()->utraps))--; \ + current_thread_info()->utraps = NULL; \ + } \ + __asm__ __volatile__( \ + "stx %%g0, [%0 + %2 + 0x00]\n\t" \ + "stx %%g0, [%0 + %2 + 0x08]\n\t" \ + "stx %%g0, [%0 + %2 + 0x10]\n\t" \ + "stx %%g0, [%0 + %2 + 0x18]\n\t" \ + "stx %%g0, [%0 + %2 + 0x20]\n\t" \ + "stx %%g0, [%0 + %2 + 0x28]\n\t" \ + "stx %%g0, [%0 + %2 + 0x30]\n\t" \ + "stx %%g0, [%0 + %2 + 0x38]\n\t" \ + "stx %%g0, [%0 + %2 + 0x40]\n\t" \ + "stx %%g0, [%0 + %2 + 0x48]\n\t" \ + "stx %%g0, [%0 + %2 + 0x50]\n\t" \ + "stx %%g0, [%0 + %2 + 0x58]\n\t" \ + "stx %%g0, [%0 + %2 + 0x60]\n\t" \ + "stx %%g0, [%0 + %2 + 0x68]\n\t" \ + "stx %1, [%0 + %2 + 0x70]\n\t" \ + "stx %%g0, [%0 + %2 + 0x78]\n\t" \ + "wrpr %%g0, (2 << 3), %%wstate\n\t" \ + : \ + : "r" (regs), "r" (sp - sizeof(struct reg_window32)), \ + "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \ +} while (0) + +/* Free all resources held by a thread. */ +#define release_thread(tsk) do { } while (0) + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +extern unsigned long get_wchan(struct task_struct *task); + +#define task_pt_regs(tsk) (task_thread_info(tsk)->kregs) +#define KSTK_EIP(tsk) (task_pt_regs(tsk)->tpc) +#define KSTK_ESP(tsk) (task_pt_regs(tsk)->u_regs[UREG_FP]) + +#define cpu_relax() barrier() + +/* Prefetch support. This is tuned for UltraSPARC-III and later. + * UltraSPARC-I will treat these as nops, and UltraSPARC-II has + * a shallower prefetch queue than later chips. + */ +#define ARCH_HAS_PREFETCH +#define ARCH_HAS_PREFETCHW +#define ARCH_HAS_SPINLOCK_PREFETCH + +static inline void prefetch(const void *x) +{ + /* We do not use the read prefetch mnemonic because that + * prefetches into the prefetch-cache which only is accessible + * by floating point operations in UltraSPARC-III and later. + * By contrast, "#one_write" prefetches into the L2 cache + * in shared state. + */ + __asm__ __volatile__("prefetch [%0], #one_write" + : /* no outputs */ + : "r" (x)); +} + +static inline void prefetchw(const void *x) +{ + /* The most optimal prefetch to use for writes is + * "#n_writes". This brings the cacheline into the + * L2 cache in "owned" state. + */ + __asm__ __volatile__("prefetch [%0], #n_writes" + : /* no outputs */ + : "r" (x)); +} + +#define spin_lock_prefetch(x) prefetchw(x) + +#define HAVE_ARCH_PICK_MMAP_LAYOUT + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(__ASM_SPARC64_PROCESSOR_H) */ diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h new file mode 100644 index 00000000000..fd55522481c --- /dev/null +++ b/arch/sparc/include/asm/prom.h @@ -0,0 +1,108 @@ +#ifndef _SPARC_PROM_H +#define _SPARC_PROM_H +#ifdef __KERNEL__ + +/* + * Definitions for talking to the Open Firmware PROM on + * Power Macintosh computers. + * + * Copyright (C) 1996-2005 Paul Mackerras. + * + * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. + * Updates for SPARC by David S. Miller + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/types.h> +#include <linux/proc_fs.h> +#include <asm/atomic.h> + +#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 2 +#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1 + +#define of_compat_cmp(s1, s2, l) strncmp((s1), (s2), (l)) +#define of_prop_cmp(s1, s2) strcasecmp((s1), (s2)) +#define of_node_cmp(s1, s2) strcmp((s1), (s2)) + +typedef u32 phandle; +typedef u32 ihandle; + +struct property { + char *name; + int length; + void *value; + struct property *next; + unsigned long _flags; + unsigned int unique_id; +}; + +struct of_irq_controller; +struct device_node { + const char *name; + const char *type; + phandle node; + char *path_component_name; + char *full_name; + + struct property *properties; + struct property *deadprops; /* removed properties */ + struct device_node *parent; + struct device_node *child; + struct device_node *sibling; + struct device_node *next; /* next device of same type */ + struct device_node *allnext; /* next in list of all nodes */ + struct proc_dir_entry *pde; /* this node's proc directory */ + struct kref kref; + unsigned long _flags; + void *data; + unsigned int unique_id; + + struct of_irq_controller *irq_trans; +}; + +struct of_irq_controller { + unsigned int (*irq_build)(struct device_node *, unsigned int, void *); + void *data; +}; + +#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags) +#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags) + +extern struct device_node *of_find_node_by_cpuid(int cpuid); +extern int of_set_property(struct device_node *node, const char *name, void *val, int len); +extern int of_getintprop_default(struct device_node *np, + const char *name, + int def); +extern int of_find_in_proplist(const char *list, const char *match, int len); +#ifdef CONFIG_NUMA +extern int of_node_to_nid(struct device_node *dp); +#else +#define of_node_to_nid(dp) (-1) +#endif + +extern void prom_build_devicetree(void); + +/* Dummy ref counting routines - to be implemented later */ +static inline struct device_node *of_node_get(struct device_node *node) +{ + return node; +} +static inline void of_node_put(struct device_node *node) +{ +} + +/* + * NB: This is here while we transition from using asm/prom.h + * to linux/of.h + */ +#include <linux/of.h> + +extern struct device_node *of_console_device; +extern char *of_console_path; +extern char *of_console_options; + +#endif /* __KERNEL__ */ +#endif /* _SPARC_PROM_H */ diff --git a/arch/sparc/include/asm/psr.h b/arch/sparc/include/asm/psr.h new file mode 100644 index 00000000000..b8c0e5f0a66 --- /dev/null +++ b/arch/sparc/include/asm/psr.h @@ -0,0 +1,93 @@ +/* + * psr.h: This file holds the macros for masking off various parts of + * the processor status register on the Sparc. This is valid + * for Version 8. On the V9 this is renamed to the PSTATE + * register and its members are accessed as fields like + * PSTATE.PRIV for the current CPU privilege level. + * + * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef __LINUX_SPARC_PSR_H +#define __LINUX_SPARC_PSR_H + +/* The Sparc PSR fields are laid out as the following: + * + * ------------------------------------------------------------------------ + * | impl | vers | icc | resv | EC | EF | PIL | S | PS | ET | CWP | + * | 31-28 | 27-24 | 23-20 | 19-14 | 13 | 12 | 11-8 | 7 | 6 | 5 | 4-0 | + * ------------------------------------------------------------------------ + */ +#define PSR_CWP 0x0000001f /* current window pointer */ +#define PSR_ET 0x00000020 /* enable traps field */ +#define PSR_PS 0x00000040 /* previous privilege level */ +#define PSR_S 0x00000080 /* current privilege level */ +#define PSR_PIL 0x00000f00 /* processor interrupt level */ +#define PSR_EF 0x00001000 /* enable floating point */ +#define PSR_EC 0x00002000 /* enable co-processor */ +#define PSR_SYSCALL 0x00004000 /* inside of a syscall */ +#define PSR_LE 0x00008000 /* SuperSparcII little-endian */ +#define PSR_ICC 0x00f00000 /* integer condition codes */ +#define PSR_C 0x00100000 /* carry bit */ +#define PSR_V 0x00200000 /* overflow bit */ +#define PSR_Z 0x00400000 /* zero bit */ +#define PSR_N 0x00800000 /* negative bit */ +#define PSR_VERS 0x0f000000 /* cpu-version field */ +#define PSR_IMPL 0xf0000000 /* cpu-implementation field */ + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +/* Get the %psr register. */ +static inline unsigned int get_psr(void) +{ + unsigned int psr; + __asm__ __volatile__( + "rd %%psr, %0\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : "=r" (psr) + : /* no inputs */ + : "memory"); + + return psr; +} + +static inline void put_psr(unsigned int new_psr) +{ + __asm__ __volatile__( + "wr %0, 0x0, %%psr\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + : /* no outputs */ + : "r" (new_psr) + : "memory", "cc"); +} + +/* Get the %fsr register. Be careful, make sure the floating point + * enable bit is set in the %psr when you execute this or you will + * incur a trap. + */ + +extern unsigned int fsr_storage; + +static inline unsigned int get_fsr(void) +{ + unsigned int fsr = 0; + + __asm__ __volatile__( + "st %%fsr, %1\n\t" + "ld %1, %0\n\t" + : "=r" (fsr) + : "m" (fsr_storage)); + + return fsr; +} + +#endif /* !(__ASSEMBLY__) */ + +#endif /* (__KERNEL__) */ + +#endif /* !(__LINUX_SPARC_PSR_H) */ diff --git a/arch/sparc/include/asm/psrcompat.h b/arch/sparc/include/asm/psrcompat.h new file mode 100644 index 00000000000..44b6327dbbf --- /dev/null +++ b/arch/sparc/include/asm/psrcompat.h @@ -0,0 +1,45 @@ +#ifndef _SPARC64_PSRCOMPAT_H +#define _SPARC64_PSRCOMPAT_H + +#include <asm/pstate.h> + +/* Old 32-bit PSR fields for the compatibility conversion code. */ +#define PSR_CWP 0x0000001f /* current window pointer */ +#define PSR_ET 0x00000020 /* enable traps field */ +#define PSR_PS 0x00000040 /* previous privilege level */ +#define PSR_S 0x00000080 /* current privilege level */ +#define PSR_PIL 0x00000f00 /* processor interrupt level */ +#define PSR_EF 0x00001000 /* enable floating point */ +#define PSR_EC 0x00002000 /* enable co-processor */ +#define PSR_SYSCALL 0x00004000 /* inside of a syscall */ +#define PSR_LE 0x00008000 /* SuperSparcII little-endian */ +#define PSR_ICC 0x00f00000 /* integer condition codes */ +#define PSR_C 0x00100000 /* carry bit */ +#define PSR_V 0x00200000 /* overflow bit */ +#define PSR_Z 0x00400000 /* zero bit */ +#define PSR_N 0x00800000 /* negative bit */ +#define PSR_VERS 0x0f000000 /* cpu-version field */ +#define PSR_IMPL 0xf0000000 /* cpu-implementation field */ + +#define PSR_V8PLUS 0xff000000 /* fake impl/ver, meaning a 64bit CPU is present */ +#define PSR_XCC 0x000f0000 /* if PSR_V8PLUS, this is %xcc */ + +static inline unsigned int tstate_to_psr(unsigned long tstate) +{ + return ((tstate & TSTATE_CWP) | + PSR_S | + ((tstate & TSTATE_ICC) >> 12) | + ((tstate & TSTATE_XCC) >> 20) | + ((tstate & TSTATE_SYSCALL) ? PSR_SYSCALL : 0) | + PSR_V8PLUS); +} + +static inline unsigned long psr_to_tstate_icc(unsigned int psr) +{ + unsigned long tstate = ((unsigned long)(psr & PSR_ICC)) << 12; + if ((psr & (PSR_VERS|PSR_IMPL)) == PSR_V8PLUS) + tstate |= ((unsigned long)(psr & PSR_XCC)) << 20; + return tstate; +} + +#endif /* !(_SPARC64_PSRCOMPAT_H) */ diff --git a/arch/sparc/include/asm/pstate.h b/arch/sparc/include/asm/pstate.h new file mode 100644 index 00000000000..a26a53777bb --- /dev/null +++ b/arch/sparc/include/asm/pstate.h @@ -0,0 +1,91 @@ +#ifndef _SPARC64_PSTATE_H +#define _SPARC64_PSTATE_H + +#include <linux/const.h> + +/* The V9 PSTATE Register (with SpitFire extensions). + * + * ----------------------------------------------------------------------- + * | Resv | IG | MG | CLE | TLE | MM | RED | PEF | AM | PRIV | IE | AG | + * ----------------------------------------------------------------------- + * 63 12 11 10 9 8 7 6 5 4 3 2 1 0 + */ +#define PSTATE_IG _AC(0x0000000000000800,UL) /* Interrupt Globals. */ +#define PSTATE_MG _AC(0x0000000000000400,UL) /* MMU Globals. */ +#define PSTATE_CLE _AC(0x0000000000000200,UL) /* Current Little Endian.*/ +#define PSTATE_TLE _AC(0x0000000000000100,UL) /* Trap Little Endian. */ +#define PSTATE_MM _AC(0x00000000000000c0,UL) /* Memory Model. */ +#define PSTATE_TSO _AC(0x0000000000000000,UL) /* MM: TotalStoreOrder */ +#define PSTATE_PSO _AC(0x0000000000000040,UL) /* MM: PartialStoreOrder */ +#define PSTATE_RMO _AC(0x0000000000000080,UL) /* MM: RelaxedMemoryOrder*/ +#define PSTATE_RED _AC(0x0000000000000020,UL) /* Reset Error Debug. */ +#define PSTATE_PEF _AC(0x0000000000000010,UL) /* Floating Point Enable.*/ +#define PSTATE_AM _AC(0x0000000000000008,UL) /* Address Mask. */ +#define PSTATE_PRIV _AC(0x0000000000000004,UL) /* Privilege. */ +#define PSTATE_IE _AC(0x0000000000000002,UL) /* Interrupt Enable. */ +#define PSTATE_AG _AC(0x0000000000000001,UL) /* Alternate Globals. */ + +/* The V9 TSTATE Register (with SpitFire and Linux extensions). + * + * --------------------------------------------------------------------- + * | Resv | GL | CCR | ASI | %pil | PSTATE | Resv | CWP | + * --------------------------------------------------------------------- + * 63 43 42 40 39 32 31 24 23 20 19 8 7 5 4 0 + */ +#define TSTATE_GL _AC(0x0000070000000000,UL) /* Global reg level */ +#define TSTATE_CCR _AC(0x000000ff00000000,UL) /* Condition Codes. */ +#define TSTATE_XCC _AC(0x000000f000000000,UL) /* Condition Codes. */ +#define TSTATE_XNEG _AC(0x0000008000000000,UL) /* %xcc Negative. */ +#define TSTATE_XZERO _AC(0x0000004000000000,UL) /* %xcc Zero. */ +#define TSTATE_XOVFL _AC(0x0000002000000000,UL) /* %xcc Overflow. */ +#define TSTATE_XCARRY _AC(0x0000001000000000,UL) /* %xcc Carry. */ +#define TSTATE_ICC _AC(0x0000000f00000000,UL) /* Condition Codes. */ +#define TSTATE_INEG _AC(0x0000000800000000,UL) /* %icc Negative. */ +#define TSTATE_IZERO _AC(0x0000000400000000,UL) /* %icc Zero. */ +#define TSTATE_IOVFL _AC(0x0000000200000000,UL) /* %icc Overflow. */ +#define TSTATE_ICARRY _AC(0x0000000100000000,UL) /* %icc Carry. */ +#define TSTATE_ASI _AC(0x00000000ff000000,UL) /* AddrSpace ID. */ +#define TSTATE_PIL _AC(0x0000000000f00000,UL) /* %pil (Linux traps)*/ +#define TSTATE_PSTATE _AC(0x00000000000fff00,UL) /* PSTATE. */ +#define TSTATE_IG _AC(0x0000000000080000,UL) /* Interrupt Globals.*/ +#define TSTATE_MG _AC(0x0000000000040000,UL) /* MMU Globals. */ +#define TSTATE_CLE _AC(0x0000000000020000,UL) /* CurrLittleEndian. */ +#define TSTATE_TLE _AC(0x0000000000010000,UL) /* TrapLittleEndian. */ +#define TSTATE_MM _AC(0x000000000000c000,UL) /* Memory Model. */ +#define TSTATE_TSO _AC(0x0000000000000000,UL) /* MM: TSO */ +#define TSTATE_PSO _AC(0x0000000000004000,UL) /* MM: PSO */ +#define TSTATE_RMO _AC(0x0000000000008000,UL) /* MM: RMO */ +#define TSTATE_RED _AC(0x0000000000002000,UL) /* Reset Error Debug.*/ +#define TSTATE_PEF _AC(0x0000000000001000,UL) /* FPU Enable. */ +#define TSTATE_AM _AC(0x0000000000000800,UL) /* Address Mask. */ +#define TSTATE_PRIV _AC(0x0000000000000400,UL) /* Privilege. */ +#define TSTATE_IE _AC(0x0000000000000200,UL) /* Interrupt Enable. */ +#define TSTATE_AG _AC(0x0000000000000100,UL) /* Alternate Globals.*/ +#define TSTATE_SYSCALL _AC(0x0000000000000020,UL) /* in syscall trap */ +#define TSTATE_CWP _AC(0x000000000000001f,UL) /* Curr Win-Pointer. */ + +/* Floating-Point Registers State Register. + * + * -------------------------------- + * | Resv | FEF | DU | DL | + * -------------------------------- + * 63 3 2 1 0 + */ +#define FPRS_FEF _AC(0x0000000000000004,UL) /* FPU Enable. */ +#define FPRS_DU _AC(0x0000000000000002,UL) /* Dirty Upper. */ +#define FPRS_DL _AC(0x0000000000000001,UL) /* Dirty Lower. */ + +/* Version Register. + * + * ------------------------------------------------------ + * | MANUF | IMPL | MASK | Resv | MAXTL | Resv | MAXWIN | + * ------------------------------------------------------ + * 63 48 47 32 31 24 23 16 15 8 7 5 4 0 + */ +#define VERS_MANUF _AC(0xffff000000000000,UL) /* Manufacturer. */ +#define VERS_IMPL _AC(0x0000ffff00000000,UL) /* Implementation. */ +#define VERS_MASK _AC(0x00000000ff000000,UL) /* Mask Set Revision.*/ +#define VERS_MAXTL _AC(0x000000000000ff00,UL) /* Max Trap Level. */ +#define VERS_MAXWIN _AC(0x000000000000001f,UL) /* Max RegWindow Idx.*/ + +#endif /* !(_SPARC64_PSTATE_H) */ diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h new file mode 100644 index 00000000000..6dcbe2eed2e --- /dev/null +++ b/arch/sparc/include/asm/ptrace.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_PTRACE_H +#define ___ASM_SPARC_PTRACE_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/ptrace_64.h> +#else +#include <asm/ptrace_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/ptrace_32.h b/arch/sparc/include/asm/ptrace_32.h new file mode 100644 index 00000000000..d43c88b8683 --- /dev/null +++ b/arch/sparc/include/asm/ptrace_32.h @@ -0,0 +1,176 @@ +#ifndef _SPARC_PTRACE_H +#define _SPARC_PTRACE_H + +#include <asm/psr.h> + +/* This struct defines the way the registers are stored on the + * stack during a system call and basically all traps. + */ + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> + +struct pt_regs { + unsigned long psr; + unsigned long pc; + unsigned long npc; + unsigned long y; + unsigned long u_regs[16]; /* globals and ins */ +}; + +#define UREG_G0 0 +#define UREG_G1 1 +#define UREG_G2 2 +#define UREG_G3 3 +#define UREG_G4 4 +#define UREG_G5 5 +#define UREG_G6 6 +#define UREG_G7 7 +#define UREG_I0 8 +#define UREG_I1 9 +#define UREG_I2 10 +#define UREG_I3 11 +#define UREG_I4 12 +#define UREG_I5 13 +#define UREG_I6 14 +#define UREG_I7 15 +#define UREG_WIM UREG_G0 +#define UREG_FADDR UREG_G0 +#define UREG_FP UREG_I6 +#define UREG_RETPC UREG_I7 + +static inline bool pt_regs_is_syscall(struct pt_regs *regs) +{ + return (regs->psr & PSR_SYSCALL); +} + +static inline bool pt_regs_clear_syscall(struct pt_regs *regs) +{ + return (regs->psr &= ~PSR_SYSCALL); +} + +/* A register window */ +struct reg_window { + unsigned long locals[8]; + unsigned long ins[8]; +}; + +/* A Sparc stack frame */ +struct sparc_stackf { + unsigned long locals[8]; + unsigned long ins[6]; + struct sparc_stackf *fp; + unsigned long callers_pc; + char *structptr; + unsigned long xargs[6]; + unsigned long xxargs[1]; +}; + +#define TRACEREG_SZ sizeof(struct pt_regs) +#define STACKFRAME_SZ sizeof(struct sparc_stackf) + +#ifdef __KERNEL__ + +#define user_mode(regs) (!((regs)->psr & PSR_PS)) +#define instruction_pointer(regs) ((regs)->pc) +#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP]) +unsigned long profile_pc(struct pt_regs *); +extern void show_regs(struct pt_regs *); +#endif + +#else /* __ASSEMBLY__ */ +/* For assembly code. */ +#define TRACEREG_SZ 0x50 +#define STACKFRAME_SZ 0x60 +#endif + +/* + * The asm-offsets.h is a generated file, so we cannot include it. + * It may be OK for glibc headers, but it's utterly pointless for C code. + * The assembly code using those offsets has to include it explicitly. + */ +/* #include <asm/asm-offsets.h> */ + +/* These are for pt_regs. */ +#define PT_PSR 0x0 +#define PT_PC 0x4 +#define PT_NPC 0x8 +#define PT_Y 0xc +#define PT_G0 0x10 +#define PT_WIM PT_G0 +#define PT_G1 0x14 +#define PT_G2 0x18 +#define PT_G3 0x1c +#define PT_G4 0x20 +#define PT_G5 0x24 +#define PT_G6 0x28 +#define PT_G7 0x2c +#define PT_I0 0x30 +#define PT_I1 0x34 +#define PT_I2 0x38 +#define PT_I3 0x3c +#define PT_I4 0x40 +#define PT_I5 0x44 +#define PT_I6 0x48 +#define PT_FP PT_I6 +#define PT_I7 0x4c + +/* Reg_window offsets */ +#define RW_L0 0x00 +#define RW_L1 0x04 +#define RW_L2 0x08 +#define RW_L3 0x0c +#define RW_L4 0x10 +#define RW_L5 0x14 +#define RW_L6 0x18 +#define RW_L7 0x1c +#define RW_I0 0x20 +#define RW_I1 0x24 +#define RW_I2 0x28 +#define RW_I3 0x2c +#define RW_I4 0x30 +#define RW_I5 0x34 +#define RW_I6 0x38 +#define RW_I7 0x3c + +/* Stack_frame offsets */ +#define SF_L0 0x00 +#define SF_L1 0x04 +#define SF_L2 0x08 +#define SF_L3 0x0c +#define SF_L4 0x10 +#define SF_L5 0x14 +#define SF_L6 0x18 +#define SF_L7 0x1c +#define SF_I0 0x20 +#define SF_I1 0x24 +#define SF_I2 0x28 +#define SF_I3 0x2c +#define SF_I4 0x30 +#define SF_I5 0x34 +#define SF_FP 0x38 +#define SF_PC 0x3c +#define SF_RETP 0x40 +#define SF_XARG0 0x44 +#define SF_XARG1 0x48 +#define SF_XARG2 0x4c +#define SF_XARG3 0x50 +#define SF_XARG4 0x54 +#define SF_XARG5 0x58 +#define SF_XXARG 0x5c + +/* Stuff for the ptrace system call */ +#define PTRACE_SPARC_DETACH 11 +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +#define PTRACE_READDATA 16 +#define PTRACE_WRITEDATA 17 +#define PTRACE_READTEXT 18 +#define PTRACE_WRITETEXT 19 +#define PTRACE_GETFPAREGS 20 +#define PTRACE_SETFPAREGS 21 + +#endif /* !(_SPARC_PTRACE_H) */ diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h new file mode 100644 index 00000000000..ec6d45c84cd --- /dev/null +++ b/arch/sparc/include/asm/ptrace_64.h @@ -0,0 +1,347 @@ +#ifndef _SPARC64_PTRACE_H +#define _SPARC64_PTRACE_H + +#include <asm/pstate.h> + +/* This struct defines the way the registers are stored on the + * stack during a system call and basically all traps. + */ + +/* This magic value must have the low 9 bits clear, + * as that is where we encode the %tt value, see below. + */ +#define PT_REGS_MAGIC 0x57ac6c00 + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> + +struct pt_regs { + unsigned long u_regs[16]; /* globals and ins */ + unsigned long tstate; + unsigned long tpc; + unsigned long tnpc; + unsigned int y; + + /* We encode a magic number, PT_REGS_MAGIC, along + * with the %tt (trap type) register value at trap + * entry time. The magic number allows us to identify + * accurately a trap stack frame in the stack + * unwinder, and the %tt value allows us to test + * things like "in a system call" etc. for an arbitray + * process. + * + * The PT_REGS_MAGIC is choosen such that it can be + * loaded completely using just a sethi instruction. + */ + unsigned int magic; +}; + +static inline int pt_regs_trap_type(struct pt_regs *regs) +{ + return regs->magic & 0x1ff; +} + +static inline bool pt_regs_is_syscall(struct pt_regs *regs) +{ + return (regs->tstate & TSTATE_SYSCALL); +} + +static inline bool pt_regs_clear_syscall(struct pt_regs *regs) +{ + return (regs->tstate &= ~TSTATE_SYSCALL); +} + +struct pt_regs32 { + unsigned int psr; + unsigned int pc; + unsigned int npc; + unsigned int y; + unsigned int u_regs[16]; /* globals and ins */ +}; + +#define UREG_G0 0 +#define UREG_G1 1 +#define UREG_G2 2 +#define UREG_G3 3 +#define UREG_G4 4 +#define UREG_G5 5 +#define UREG_G6 6 +#define UREG_G7 7 +#define UREG_I0 8 +#define UREG_I1 9 +#define UREG_I2 10 +#define UREG_I3 11 +#define UREG_I4 12 +#define UREG_I5 13 +#define UREG_I6 14 +#define UREG_I7 15 +#define UREG_FP UREG_I6 +#define UREG_RETPC UREG_I7 + +/* A V9 register window */ +struct reg_window { + unsigned long locals[8]; + unsigned long ins[8]; +}; + +/* A 32-bit register window. */ +struct reg_window32 { + unsigned int locals[8]; + unsigned int ins[8]; +}; + +/* A V9 Sparc stack frame */ +struct sparc_stackf { + unsigned long locals[8]; + unsigned long ins[6]; + struct sparc_stackf *fp; + unsigned long callers_pc; + char *structptr; + unsigned long xargs[6]; + unsigned long xxargs[1]; +}; + +/* A 32-bit Sparc stack frame */ +struct sparc_stackf32 { + unsigned int locals[8]; + unsigned int ins[6]; + unsigned int fp; + unsigned int callers_pc; + unsigned int structptr; + unsigned int xargs[6]; + unsigned int xxargs[1]; +}; + +struct sparc_trapf { + unsigned long locals[8]; + unsigned long ins[8]; + unsigned long _unused; + struct pt_regs *regs; +}; + +#define TRACEREG_SZ sizeof(struct pt_regs) +#define STACKFRAME_SZ sizeof(struct sparc_stackf) + +#define TRACEREG32_SZ sizeof(struct pt_regs32) +#define STACKFRAME32_SZ sizeof(struct sparc_stackf32) + +#ifdef __KERNEL__ + +struct global_reg_snapshot { + unsigned long tstate; + unsigned long tpc; + unsigned long tnpc; + unsigned long o7; + unsigned long i7; + struct thread_info *thread; + unsigned long pad1; + unsigned long pad2; +}; + +#define __ARCH_WANT_COMPAT_SYS_PTRACE + +#define force_successful_syscall_return() \ +do { current_thread_info()->syscall_noerror = 1; \ +} while (0) +#define user_mode(regs) (!((regs)->tstate & TSTATE_PRIV)) +#define instruction_pointer(regs) ((regs)->tpc) +#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP]) +#define regs_return_value(regs) ((regs)->u_regs[UREG_I0]) +#ifdef CONFIG_SMP +extern unsigned long profile_pc(struct pt_regs *); +#else +#define profile_pc(regs) instruction_pointer(regs) +#endif +extern void show_regs(struct pt_regs *); +extern void __show_regs(struct pt_regs *); +#endif + +#else /* __ASSEMBLY__ */ +/* For assembly code. */ +#define TRACEREG_SZ 0xa0 +#define STACKFRAME_SZ 0xc0 + +#define TRACEREG32_SZ 0x50 +#define STACKFRAME32_SZ 0x60 +#endif + +#ifdef __KERNEL__ +#define STACK_BIAS 2047 +#endif + +/* These are for pt_regs. */ +#define PT_V9_G0 0x00 +#define PT_V9_G1 0x08 +#define PT_V9_G2 0x10 +#define PT_V9_G3 0x18 +#define PT_V9_G4 0x20 +#define PT_V9_G5 0x28 +#define PT_V9_G6 0x30 +#define PT_V9_G7 0x38 +#define PT_V9_I0 0x40 +#define PT_V9_I1 0x48 +#define PT_V9_I2 0x50 +#define PT_V9_I3 0x58 +#define PT_V9_I4 0x60 +#define PT_V9_I5 0x68 +#define PT_V9_I6 0x70 +#define PT_V9_FP PT_V9_I6 +#define PT_V9_I7 0x78 +#define PT_V9_TSTATE 0x80 +#define PT_V9_TPC 0x88 +#define PT_V9_TNPC 0x90 +#define PT_V9_Y 0x98 +#define PT_V9_MAGIC 0x9c +#define PT_TSTATE PT_V9_TSTATE +#define PT_TPC PT_V9_TPC +#define PT_TNPC PT_V9_TNPC + +/* These for pt_regs32. */ +#define PT_PSR 0x0 +#define PT_PC 0x4 +#define PT_NPC 0x8 +#define PT_Y 0xc +#define PT_G0 0x10 +#define PT_WIM PT_G0 +#define PT_G1 0x14 +#define PT_G2 0x18 +#define PT_G3 0x1c +#define PT_G4 0x20 +#define PT_G5 0x24 +#define PT_G6 0x28 +#define PT_G7 0x2c +#define PT_I0 0x30 +#define PT_I1 0x34 +#define PT_I2 0x38 +#define PT_I3 0x3c +#define PT_I4 0x40 +#define PT_I5 0x44 +#define PT_I6 0x48 +#define PT_FP PT_I6 +#define PT_I7 0x4c + +/* Reg_window offsets */ +#define RW_V9_L0 0x00 +#define RW_V9_L1 0x08 +#define RW_V9_L2 0x10 +#define RW_V9_L3 0x18 +#define RW_V9_L4 0x20 +#define RW_V9_L5 0x28 +#define RW_V9_L6 0x30 +#define RW_V9_L7 0x38 +#define RW_V9_I0 0x40 +#define RW_V9_I1 0x48 +#define RW_V9_I2 0x50 +#define RW_V9_I3 0x58 +#define RW_V9_I4 0x60 +#define RW_V9_I5 0x68 +#define RW_V9_I6 0x70 +#define RW_V9_I7 0x78 + +#define RW_L0 0x00 +#define RW_L1 0x04 +#define RW_L2 0x08 +#define RW_L3 0x0c +#define RW_L4 0x10 +#define RW_L5 0x14 +#define RW_L6 0x18 +#define RW_L7 0x1c +#define RW_I0 0x20 +#define RW_I1 0x24 +#define RW_I2 0x28 +#define RW_I3 0x2c +#define RW_I4 0x30 +#define RW_I5 0x34 +#define RW_I6 0x38 +#define RW_I7 0x3c + +/* Stack_frame offsets */ +#define SF_V9_L0 0x00 +#define SF_V9_L1 0x08 +#define SF_V9_L2 0x10 +#define SF_V9_L3 0x18 +#define SF_V9_L4 0x20 +#define SF_V9_L5 0x28 +#define SF_V9_L6 0x30 +#define SF_V9_L7 0x38 +#define SF_V9_I0 0x40 +#define SF_V9_I1 0x48 +#define SF_V9_I2 0x50 +#define SF_V9_I3 0x58 +#define SF_V9_I4 0x60 +#define SF_V9_I5 0x68 +#define SF_V9_FP 0x70 +#define SF_V9_PC 0x78 +#define SF_V9_RETP 0x80 +#define SF_V9_XARG0 0x88 +#define SF_V9_XARG1 0x90 +#define SF_V9_XARG2 0x98 +#define SF_V9_XARG3 0xa0 +#define SF_V9_XARG4 0xa8 +#define SF_V9_XARG5 0xb0 +#define SF_V9_XXARG 0xb8 + +#define SF_L0 0x00 +#define SF_L1 0x04 +#define SF_L2 0x08 +#define SF_L3 0x0c +#define SF_L4 0x10 +#define SF_L5 0x14 +#define SF_L6 0x18 +#define SF_L7 0x1c +#define SF_I0 0x20 +#define SF_I1 0x24 +#define SF_I2 0x28 +#define SF_I3 0x2c +#define SF_I4 0x30 +#define SF_I5 0x34 +#define SF_FP 0x38 +#define SF_PC 0x3c +#define SF_RETP 0x40 +#define SF_XARG0 0x44 +#define SF_XARG1 0x48 +#define SF_XARG2 0x4c +#define SF_XARG3 0x50 +#define SF_XARG4 0x54 +#define SF_XARG5 0x58 +#define SF_XXARG 0x5c + +#ifdef __KERNEL__ + +/* global_reg_snapshot offsets */ +#define GR_SNAP_TSTATE 0x00 +#define GR_SNAP_TPC 0x08 +#define GR_SNAP_TNPC 0x10 +#define GR_SNAP_O7 0x18 +#define GR_SNAP_I7 0x20 +#define GR_SNAP_THREAD 0x28 +#define GR_SNAP_PAD1 0x30 +#define GR_SNAP_PAD2 0x38 + +#endif /* __KERNEL__ */ + +/* Stuff for the ptrace system call */ +#define PTRACE_SPARC_DETACH 11 +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +#define PTRACE_READDATA 16 +#define PTRACE_WRITEDATA 17 +#define PTRACE_READTEXT 18 +#define PTRACE_WRITETEXT 19 +#define PTRACE_GETFPAREGS 20 +#define PTRACE_SETFPAREGS 21 + +/* There are for debugging 64-bit processes, either from a 32 or 64 bit + * parent. Thus their complements are for debugging 32-bit processes only. + */ + +#define PTRACE_GETREGS64 22 +#define PTRACE_SETREGS64 23 +/* PTRACE_SYSCALL is 24 */ +#define PTRACE_GETFPREGS64 25 +#define PTRACE_SETFPREGS64 26 + +#endif /* !(_SPARC64_PTRACE_H) */ diff --git a/arch/sparc/include/asm/reboot.h b/arch/sparc/include/asm/reboot.h new file mode 100644 index 00000000000..3f3f43f5be5 --- /dev/null +++ b/arch/sparc/include/asm/reboot.h @@ -0,0 +1,6 @@ +#ifndef _SPARC64_REBOOT_H +#define _SPARC64_REBOOT_H + +extern void machine_alt_power_off(void); + +#endif /* _SPARC64_REBOOT_H */ diff --git a/arch/sparc/include/asm/reg.h b/arch/sparc/include/asm/reg.h new file mode 100644 index 00000000000..0c16e19cae4 --- /dev/null +++ b/arch/sparc/include/asm/reg.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_REG_H +#define ___ASM_SPARC_REG_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/reg_64.h> +#else +#include <asm/reg_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/reg_32.h b/arch/sparc/include/asm/reg_32.h new file mode 100644 index 00000000000..1efb056fb3d --- /dev/null +++ b/arch/sparc/include/asm/reg_32.h @@ -0,0 +1,79 @@ +/* + * linux/include/asm/reg.h + * Layout of the registers as expected by gdb on the Sparc + * we should replace the user.h definitions with those in + * this file, we don't even use the other + * -miguel + * + * The names of the structures, constants and aliases in this file + * have the same names as the sunos ones, some programs rely on these + * names (gdb for example). + * + */ + +#ifndef __SPARC_REG_H +#define __SPARC_REG_H + +struct regs { + int r_psr; +#define r_ps r_psr + int r_pc; + int r_npc; + int r_y; + int r_g1; + int r_g2; + int r_g3; + int r_g4; + int r_g5; + int r_g6; + int r_g7; + int r_o0; + int r_o1; + int r_o2; + int r_o3; + int r_o4; + int r_o5; + int r_o6; + int r_o7; +}; + +struct fpq { + unsigned long *addr; + unsigned long instr; +}; + +struct fq { + union { + double whole; + struct fpq fpq; + } FQu; +}; + +#define FPU_REGS_TYPE unsigned int +#define FPU_FSR_TYPE unsigned + +struct fp_status { + union { + FPU_REGS_TYPE Fpu_regs[32]; + double Fpu_dregs[16]; + } fpu_fr; + FPU_FSR_TYPE Fpu_fsr; + unsigned Fpu_flags; + unsigned Fpu_extra; + unsigned Fpu_qcnt; + struct fq Fpu_q[16]; +}; + +#define fpu_regs f_fpstatus.fpu_fr.Fpu_regs +#define fpu_dregs f_fpstatus.fpu_fr.Fpu_dregs +#define fpu_fsr f_fpstatus.Fpu_fsr +#define fpu_flags f_fpstatus.Fpu_flags +#define fpu_extra f_fpstatus.Fpu_extra +#define fpu_q f_fpstatus.Fpu_q +#define fpu_qcnt f_fpstatus.Fpu_qcnt + +struct fpu { + struct fp_status f_fpstatus; +}; + +#endif /* __SPARC_REG_H */ diff --git a/arch/sparc/include/asm/reg_64.h b/arch/sparc/include/asm/reg_64.h new file mode 100644 index 00000000000..6f277d7c7d8 --- /dev/null +++ b/arch/sparc/include/asm/reg_64.h @@ -0,0 +1,56 @@ +/* + * linux/asm/reg.h + * Layout of the registers as expected by gdb on the Sparc + * we should replace the user.h definitions with those in + * this file, we don't even use the other + * -miguel + * + * The names of the structures, constants and aliases in this file + * have the same names as the sunos ones, some programs rely on these + * names (gdb for example). + * + */ + +#ifndef __SPARC64_REG_H +#define __SPARC64_REG_H + +struct regs { + unsigned long r_g1; + unsigned long r_g2; + unsigned long r_g3; + unsigned long r_g4; + unsigned long r_g5; + unsigned long r_g6; + unsigned long r_g7; + unsigned long r_o0; + unsigned long r_o1; + unsigned long r_o2; + unsigned long r_o3; + unsigned long r_o4; + unsigned long r_o5; + unsigned long r_o6; + unsigned long r_o7; + unsigned long __pad; + unsigned long r_tstate; + unsigned long r_tpc; + unsigned long r_tnpc; + unsigned int r_y; + unsigned int r_fprs; +}; + +#define FPU_REGS_TYPE unsigned int +#define FPU_FSR_TYPE unsigned long + +struct fp_status { + unsigned long fpu_fr[32]; + unsigned long Fpu_fsr; +}; + +struct fpu { + struct fp_status f_fpstatus; +}; + +#define fpu_regs f_fpstatus.fpu_fr +#define fpu_fsr f_fpstatus.Fpu_fsr + +#endif /* __SPARC64_REG_H */ diff --git a/arch/sparc/include/asm/resource.h b/arch/sparc/include/asm/resource.h new file mode 100644 index 00000000000..fe163cafb4c --- /dev/null +++ b/arch/sparc/include/asm/resource.h @@ -0,0 +1,30 @@ +/* + * resource.h: Resource definitions. + * + * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_RESOURCE_H +#define _SPARC_RESOURCE_H + +/* + * These two resource limit IDs have a Sparc/Linux-specific ordering, + * the rest comes from the generic header: + */ +#define RLIMIT_NOFILE 6 /* max number of open files */ +#define RLIMIT_NPROC 7 /* max number of processes */ + +#if defined(__sparc__) && defined(__arch64__) +/* Use generic version */ +#else +/* + * SuS says limits have to be unsigned. + * We make this unsigned, but keep the + * old value for compatibility: + */ +#define RLIM_INFINITY 0x7fffffff +#endif + +#include <asm-generic/resource.h> + +#endif /* !(_SPARC_RESOURCE_H) */ diff --git a/arch/sparc/include/asm/ross.h b/arch/sparc/include/asm/ross.h new file mode 100644 index 00000000000..ecb6e81786a --- /dev/null +++ b/arch/sparc/include/asm/ross.h @@ -0,0 +1,191 @@ +/* + * ross.h: Ross module specific definitions and defines. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_ROSS_H +#define _SPARC_ROSS_H + +#include <asm/asi.h> +#include <asm/page.h> + +/* Ross made Hypersparcs have a %psr 'impl' field of '0001'. The 'vers' + * field has '1111'. + */ + +/* The MMU control register fields on the HyperSparc. + * + * ----------------------------------------------------------------- + * |implvers| RSV |CWR|SE|WBE| MID |BM| C|CS|MR|CM|RSV|CE|RSV|NF|ME| + * ----------------------------------------------------------------- + * 31 24 23-22 21 20 19 18-15 14 13 12 11 10 9 8 7-2 1 0 + * + * Phew, lots of fields there ;-) + * + * CWR: Cache Wrapping Enabled, if one cache wrapping is on. + * SE: Snoop Enable, turns on bus snooping for cache activity if one. + * WBE: Write Buffer Enable, one turns it on. + * MID: The ModuleID of the chip for MBus transactions. + * BM: Boot-Mode. One indicates the MMU is in boot mode. + * C: Indicates whether accesses are cachable while the MMU is + * disabled. + * CS: Cache Size -- 0 = 128k, 1 = 256k + * MR: Memory Reflection, one indicates that the memory bus connected + * to the MBus supports memory reflection. + * CM: Cache Mode -- 0 = write-through, 1 = copy-back + * CE: Cache Enable -- 0 = no caching, 1 = cache is on + * NF: No Fault -- 0 = faults trap the CPU from supervisor mode + * 1 = faults from supervisor mode do not generate traps + * ME: MMU Enable -- 0 = MMU is off, 1 = MMU is on + */ + +#define HYPERSPARC_CWENABLE 0x00200000 +#define HYPERSPARC_SBENABLE 0x00100000 +#define HYPERSPARC_WBENABLE 0x00080000 +#define HYPERSPARC_MIDMASK 0x00078000 +#define HYPERSPARC_BMODE 0x00004000 +#define HYPERSPARC_ACENABLE 0x00002000 +#define HYPERSPARC_CSIZE 0x00001000 +#define HYPERSPARC_MRFLCT 0x00000800 +#define HYPERSPARC_CMODE 0x00000400 +#define HYPERSPARC_CENABLE 0x00000100 +#define HYPERSPARC_NFAULT 0x00000002 +#define HYPERSPARC_MENABLE 0x00000001 + + +/* The ICCR instruction cache register on the HyperSparc. + * + * ----------------------------------------------- + * | | FTD | ICE | + * ----------------------------------------------- + * 31 1 0 + * + * This register is accessed using the V8 'wrasr' and 'rdasr' + * opcodes, since not all assemblers understand them and those + * that do use different semantics I will just hard code the + * instruction with a '.word' statement. + * + * FTD: If set to one flush instructions executed during an + * instruction cache hit occurs, the corresponding line + * for said cache-hit is invalidated. If FTD is zero, + * an unimplemented 'flush' trap will occur when any + * flush is executed by the processor. + * + * ICE: If set to one, the instruction cache is enabled. If + * zero, the cache will not be used for instruction fetches. + * + * All other bits are read as zeros, and writes to them have no + * effect. + * + * Wheee, not many assemblers understand the %iccr register nor + * the generic asr r/w instructions. + * + * 1000 0011 0100 0111 1100 0000 0000 0000 ! rd %iccr, %g1 + * + * 0x 8 3 4 7 c 0 0 0 ! 0x8347c000 + * + * 1011 1111 1000 0000 0110 0000 0000 0000 ! wr %g1, 0x0, %iccr + * + * 0x b f 8 0 6 0 0 0 ! 0xbf806000 + * + */ + +#define HYPERSPARC_ICCR_FTD 0x00000002 +#define HYPERSPARC_ICCR_ICE 0x00000001 + +#ifndef __ASSEMBLY__ + +static inline unsigned int get_ross_icr(void) +{ + unsigned int icreg; + + __asm__ __volatile__(".word 0x8347c000\n\t" /* rd %iccr, %g1 */ + "mov %%g1, %0\n\t" + : "=r" (icreg) + : /* no inputs */ + : "g1", "memory"); + + return icreg; +} + +static inline void put_ross_icr(unsigned int icreg) +{ + __asm__ __volatile__("or %%g0, %0, %%g1\n\t" + ".word 0xbf806000\n\t" /* wr %g1, 0x0, %iccr */ + "nop\n\t" + "nop\n\t" + "nop\n\t" + : /* no outputs */ + : "r" (icreg) + : "g1", "memory"); + + return; +} + +/* HyperSparc specific cache flushing. */ + +/* This is for the on-chip instruction cache. */ +static inline void hyper_flush_whole_icache(void) +{ + __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" + : /* no outputs */ + : "i" (ASI_M_FLUSH_IWHOLE) + : "memory"); + return; +} + +extern int vac_cache_size; +extern int vac_line_size; + +static inline void hyper_clear_all_tags(void) +{ + unsigned long addr; + + for(addr = 0; addr < vac_cache_size; addr += vac_line_size) + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_DATAC_TAG) + : "memory"); +} + +static inline void hyper_flush_unconditional_combined(void) +{ + unsigned long addr; + + for (addr = 0; addr < vac_cache_size; addr += vac_line_size) + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_FLUSH_CTX) + : "memory"); +} + +static inline void hyper_flush_cache_user(void) +{ + unsigned long addr; + + for (addr = 0; addr < vac_cache_size; addr += vac_line_size) + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_FLUSH_USER) + : "memory"); +} + +static inline void hyper_flush_cache_page(unsigned long page) +{ + unsigned long end; + + page &= PAGE_MASK; + end = page + PAGE_SIZE; + while (page < end) { + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (page), "i" (ASI_M_FLUSH_PAGE) + : "memory"); + page += vac_line_size; + } +} + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_SPARC_ROSS_H) */ diff --git a/arch/sparc/include/asm/rtc.h b/arch/sparc/include/asm/rtc.h new file mode 100644 index 00000000000..f9ecb1fe2ec --- /dev/null +++ b/arch/sparc/include/asm/rtc.h @@ -0,0 +1,26 @@ +/* + * rtc.h: Definitions for access to the Mostek real time clock + * + * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) + */ + +#ifndef _RTC_H +#define _RTC_H + +#include <linux/ioctl.h> + +struct rtc_time +{ + int sec; /* Seconds (0-59) */ + int min; /* Minutes (0-59) */ + int hour; /* Hour (0-23) */ + int dow; /* Day of the week (1-7) */ + int dom; /* Day of the month (1-31) */ + int month; /* Month of year (1-12) */ + int year; /* Year (0-99) */ +}; + +#define RTCGET _IOR('p', 20, struct rtc_time) +#define RTCSET _IOW('p', 21, struct rtc_time) + +#endif diff --git a/arch/sparc/include/asm/rwsem-const.h b/arch/sparc/include/asm/rwsem-const.h new file mode 100644 index 00000000000..a303c9d64d8 --- /dev/null +++ b/arch/sparc/include/asm/rwsem-const.h @@ -0,0 +1,12 @@ +/* rwsem-const.h: RW semaphore counter constants. */ +#ifndef _SPARC64_RWSEM_CONST_H +#define _SPARC64_RWSEM_CONST_H + +#define RWSEM_UNLOCKED_VALUE 0x00000000 +#define RWSEM_ACTIVE_BIAS 0x00000001 +#define RWSEM_ACTIVE_MASK 0x0000ffff +#define RWSEM_WAITING_BIAS 0xffff0000 +#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS +#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) + +#endif /* _SPARC64_RWSEM_CONST_H */ diff --git a/arch/sparc/include/asm/rwsem.h b/arch/sparc/include/asm/rwsem.h new file mode 100644 index 00000000000..1dc129ac2fe --- /dev/null +++ b/arch/sparc/include/asm/rwsem.h @@ -0,0 +1,84 @@ +/* + * rwsem.h: R/W semaphores implemented using CAS + * + * Written by David S. Miller (davem@redhat.com), 2001. + * Derived from asm-i386/rwsem.h + */ +#ifndef _SPARC64_RWSEM_H +#define _SPARC64_RWSEM_H + +#ifndef _LINUX_RWSEM_H +#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead" +#endif + +#ifdef __KERNEL__ + +#include <linux/list.h> +#include <linux/spinlock.h> +#include <asm/rwsem-const.h> + +struct rwsem_waiter; + +struct rw_semaphore { + signed int count; + spinlock_t wait_lock; + struct list_head wait_list; +#ifdef CONFIG_DEBUG_LOCK_ALLOC + struct lockdep_map dep_map; +#endif +}; + +#ifdef CONFIG_DEBUG_LOCK_ALLOC +# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } +#else +# define __RWSEM_DEP_MAP_INIT(lockname) +#endif + +#define __RWSEM_INITIALIZER(name) \ +{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \ + __RWSEM_DEP_MAP_INIT(name) } + +#define DECLARE_RWSEM(name) \ + struct rw_semaphore name = __RWSEM_INITIALIZER(name) + +extern void __init_rwsem(struct rw_semaphore *sem, const char *name, + struct lock_class_key *key); + +#define init_rwsem(sem) \ +do { \ + static struct lock_class_key __key; \ + \ + __init_rwsem((sem), #sem, &__key); \ +} while (0) + +extern void __down_read(struct rw_semaphore *sem); +extern int __down_read_trylock(struct rw_semaphore *sem); +extern void __down_write(struct rw_semaphore *sem); +extern int __down_write_trylock(struct rw_semaphore *sem); +extern void __up_read(struct rw_semaphore *sem); +extern void __up_write(struct rw_semaphore *sem); +extern void __downgrade_write(struct rw_semaphore *sem); + +static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) +{ + __down_write(sem); +} + +static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) +{ + return atomic_add_return(delta, (atomic_t *)(&sem->count)); +} + +static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) +{ + atomic_add(delta, (atomic_t *)(&sem->count)); +} + +static inline int rwsem_is_locked(struct rw_semaphore *sem) +{ + return (sem->count != 0); +} + +#endif /* __KERNEL__ */ + +#endif /* _SPARC64_RWSEM_H */ diff --git a/arch/sparc/include/asm/sbi.h b/arch/sparc/include/asm/sbi.h new file mode 100644 index 00000000000..5eb7f1965d3 --- /dev/null +++ b/arch/sparc/include/asm/sbi.h @@ -0,0 +1,115 @@ +/* + * sbi.h: SBI (Sbus Interface on sun4d) definitions + * + * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz> + */ + +#ifndef _SPARC_SBI_H +#define _SPARC_SBI_H + +#include <asm/obio.h> + +/* SBI */ +struct sbi_regs { +/* 0x0000 */ u32 cid; /* Component ID */ +/* 0x0004 */ u32 ctl; /* Control */ +/* 0x0008 */ u32 status; /* Status */ + u32 _unused1; + +/* 0x0010 */ u32 cfg0; /* Slot0 config reg */ +/* 0x0014 */ u32 cfg1; /* Slot1 config reg */ +/* 0x0018 */ u32 cfg2; /* Slot2 config reg */ +/* 0x001c */ u32 cfg3; /* Slot3 config reg */ + +/* 0x0020 */ u32 stb0; /* Streaming buf control for slot 0 */ +/* 0x0024 */ u32 stb1; /* Streaming buf control for slot 1 */ +/* 0x0028 */ u32 stb2; /* Streaming buf control for slot 2 */ +/* 0x002c */ u32 stb3; /* Streaming buf control for slot 3 */ + +/* 0x0030 */ u32 intr_state; /* Interrupt state */ +/* 0x0034 */ u32 intr_tid; /* Interrupt target ID */ +/* 0x0038 */ u32 intr_diag; /* Interrupt diagnostics */ +}; + +#define SBI_CID 0x02800000 +#define SBI_CTL 0x02800004 +#define SBI_STATUS 0x02800008 +#define SBI_CFG0 0x02800010 +#define SBI_CFG1 0x02800014 +#define SBI_CFG2 0x02800018 +#define SBI_CFG3 0x0280001c +#define SBI_STB0 0x02800020 +#define SBI_STB1 0x02800024 +#define SBI_STB2 0x02800028 +#define SBI_STB3 0x0280002c +#define SBI_INTR_STATE 0x02800030 +#define SBI_INTR_TID 0x02800034 +#define SBI_INTR_DIAG 0x02800038 + +/* Burst bits for 8, 16, 32, 64 are in cfgX registers at bits 2, 3, 4, 5 respectively */ +#define SBI_CFG_BURST_MASK 0x0000001e + +/* How to make devid from sbi no */ +#define SBI2DEVID(sbino) ((sbino<<4)|2) + +/* intr_state has 4 bits for slots 0 .. 3 and these bits are repeated for each sbus irq level + * + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * SBUS IRQ LEVEL | 7 | 6 | 5 | 4 | 3 | 2 | 1 | | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Reser | + * SLOT # |3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0| ved | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-------+ + * Bits 31 27 23 19 15 11 7 3 0 + */ + + +#ifndef __ASSEMBLY__ + +static inline int acquire_sbi(int devid, int mask) +{ + __asm__ __volatile__ ("swapa [%2] %3, %0" : + "=r" (mask) : + "0" (mask), + "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE), + "i" (ASI_M_CTL)); + return mask; +} + +static inline void release_sbi(int devid, int mask) +{ + __asm__ __volatile__ ("sta %0, [%1] %2" : : + "r" (mask), + "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE), + "i" (ASI_M_CTL)); +} + +static inline void set_sbi_tid(int devid, int targetid) +{ + __asm__ __volatile__ ("sta %0, [%1] %2" : : + "r" (targetid), + "r" (ECSR_DEV_BASE(devid) | SBI_INTR_TID), + "i" (ASI_M_CTL)); +} + +static inline int get_sbi_ctl(int devid, int cfgno) +{ + int cfg; + + __asm__ __volatile__ ("lda [%1] %2, %0" : + "=r" (cfg) : + "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)), + "i" (ASI_M_CTL)); + return cfg; +} + +static inline void set_sbi_ctl(int devid, int cfgno, int cfg) +{ + __asm__ __volatile__ ("sta %0, [%1] %2" : : + "r" (cfg), + "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)), + "i" (ASI_M_CTL)); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* !(_SPARC_SBI_H) */ diff --git a/arch/sparc/include/asm/sbus.h b/arch/sparc/include/asm/sbus.h new file mode 100644 index 00000000000..f82481ab44d --- /dev/null +++ b/arch/sparc/include/asm/sbus.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_SBUS_H +#define ___ASM_SPARC_SBUS_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/sbus_64.h> +#else +#include <asm/sbus_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/sbus_32.h b/arch/sparc/include/asm/sbus_32.h new file mode 100644 index 00000000000..77b5d3aadc9 --- /dev/null +++ b/arch/sparc/include/asm/sbus_32.h @@ -0,0 +1,153 @@ +/* + * sbus.h: Defines for the Sun SBus. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_SBUS_H +#define _SPARC_SBUS_H + +#include <linux/dma-mapping.h> +#include <linux/ioport.h> + +#include <asm/oplib.h> +#include <asm/prom.h> +#include <asm/of_device.h> +#include <asm/scatterlist.h> + +/* We scan which devices are on the SBus using the PROM node device + * tree. SBus devices are described in two different ways. You can + * either get an absolute address at which to access the device, or + * you can get a SBus 'slot' number and an offset within that slot. + */ + +/* The base address at which to calculate device OBIO addresses. */ +#define SUN_SBUS_BVADDR 0xf8000000 +#define SBUS_OFF_MASK 0x01ffffff + +/* These routines are used to calculate device address from slot + * numbers + offsets, and vice versa. + */ + +static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset) +{ + return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset)); +} + +static inline int sbus_dev_slot(unsigned long dev_addr) +{ + return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25); +} + +struct sbus_bus; + +/* Linux SBUS device tables */ +struct sbus_dev { + struct of_device ofdev; + struct sbus_bus *bus; + struct sbus_dev *next; + struct sbus_dev *child; + struct sbus_dev *parent; + int prom_node; + char prom_name[64]; + int slot; + + struct resource resource[PROMREG_MAX]; + + struct linux_prom_registers reg_addrs[PROMREG_MAX]; + int num_registers; + + struct linux_prom_ranges device_ranges[PROMREG_MAX]; + int num_device_ranges; + + unsigned int irqs[4]; + int num_irqs; +}; +#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev) + +/* This struct describes the SBus(s) found on this machine. */ +struct sbus_bus { + struct of_device ofdev; + struct sbus_dev *devices; /* Link to devices on this SBus */ + struct sbus_bus *next; /* next SBus, if more than one SBus */ + int prom_node; /* PROM device tree node for this SBus */ + char prom_name[64]; /* Usually "sbus" or "sbi" */ + int clock_freq; + + struct linux_prom_ranges sbus_ranges[PROMREG_MAX]; + int num_sbus_ranges; + + int devid; + int board; +}; +#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev) + +extern struct sbus_bus *sbus_root; + +static inline int +sbus_is_slave(struct sbus_dev *dev) +{ + /* XXX Have to write this for sun4c's */ + return 0; +} + +/* Device probing routines could find these handy */ +#define for_each_sbus(bus) \ + for((bus) = sbus_root; (bus); (bus)=(bus)->next) + +#define for_each_sbusdev(device, bus) \ + for((device) = (bus)->devices; (device); (device)=(device)->next) + +#define for_all_sbusdev(device, bus) \ + for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \ + for ((device) = (bus)->devices; (device); (device) = (device)->next) + +/* Driver DVMA interfaces. */ +#define sbus_can_dma_64bit(sdev) (0) /* actually, sparc_cpu_model==sun4d */ +#define sbus_can_burst64(sdev) (0) /* actually, sparc_cpu_model==sun4d */ +extern void sbus_set_sbus64(struct sbus_dev *, int); +extern void sbus_fill_device_irq(struct sbus_dev *); + +/* These yield IOMMU mappings in consistent mode. */ +extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp); +extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32); +void prom_adjust_ranges(struct linux_prom_ranges *, int, + struct linux_prom_ranges *, int); + +#define SBUS_DMA_BIDIRECTIONAL DMA_BIDIRECTIONAL +#define SBUS_DMA_TODEVICE DMA_TO_DEVICE +#define SBUS_DMA_FROMDEVICE DMA_FROM_DEVICE +#define SBUS_DMA_NONE DMA_NONE + +/* All the rest use streaming mode mappings. */ +extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int); +extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int); +extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int); +extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int); + +/* Finally, allow explicit synchronization of streamable mappings. */ +extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int); +#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu +extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int); +extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int); +#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu +extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int); + +/* Eric Brower (ebrower@usa.net) + * Translate SBus interrupt levels to ino values-- + * this is used when converting sbus "interrupts" OBP + * node values to "intr" node values, and is platform + * dependent. If only we could call OBP with + * "sbus-intr>cpu (sbint -- ino)" from kernel... + * See .../drivers/sbus/sbus.c for details. + */ +BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int) +#define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint) + +extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *); +extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *); +extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *); +extern int sbus_arch_preinit(void); +extern void sbus_arch_postinit(void); + +#endif /* !(_SPARC_SBUS_H) */ diff --git a/arch/sparc/include/asm/sbus_64.h b/arch/sparc/include/asm/sbus_64.h new file mode 100644 index 00000000000..0e16b6dd7e9 --- /dev/null +++ b/arch/sparc/include/asm/sbus_64.h @@ -0,0 +1,190 @@ +/* sbus.h: Defines for the Sun SBus. + * + * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net) + */ + +#ifndef _SPARC64_SBUS_H +#define _SPARC64_SBUS_H + +#include <linux/dma-mapping.h> +#include <linux/ioport.h> + +#include <asm/oplib.h> +#include <asm/prom.h> +#include <asm/of_device.h> +#include <asm/iommu.h> +#include <asm/scatterlist.h> + +/* We scan which devices are on the SBus using the PROM node device + * tree. SBus devices are described in two different ways. You can + * either get an absolute address at which to access the device, or + * you can get a SBus 'slot' number and an offset within that slot. + */ + +/* The base address at which to calculate device OBIO addresses. */ +#define SUN_SBUS_BVADDR 0x00000000 +#define SBUS_OFF_MASK 0x0fffffff + +/* These routines are used to calculate device address from slot + * numbers + offsets, and vice versa. + */ + +static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset) +{ + return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<28)+(offset)); +} + +static inline int sbus_dev_slot(unsigned long dev_addr) +{ + return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>28); +} + +struct sbus_bus; + +/* Linux SBUS device tables */ +struct sbus_dev { + struct of_device ofdev; + struct sbus_bus *bus; + struct sbus_dev *next; + struct sbus_dev *child; + struct sbus_dev *parent; + int prom_node; + char prom_name[64]; + int slot; + + struct resource resource[PROMREG_MAX]; + + struct linux_prom_registers reg_addrs[PROMREG_MAX]; + int num_registers; + + struct linux_prom_ranges device_ranges[PROMREG_MAX]; + int num_device_ranges; + + unsigned int irqs[4]; + int num_irqs; +}; +#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev) + +/* This struct describes the SBus(s) found on this machine. */ +struct sbus_bus { + struct of_device ofdev; + struct sbus_dev *devices; /* Tree of SBUS devices */ + struct sbus_bus *next; /* Next SBUS in system */ + int prom_node; /* OBP node of SBUS */ + char prom_name[64]; /* Usually "sbus" or "sbi" */ + int clock_freq; + + struct linux_prom_ranges sbus_ranges[PROMREG_MAX]; + int num_sbus_ranges; + + int portid; +}; +#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev) + +extern struct sbus_bus *sbus_root; + +/* Device probing routines could find these handy */ +#define for_each_sbus(bus) \ + for((bus) = sbus_root; (bus); (bus)=(bus)->next) + +#define for_each_sbusdev(device, bus) \ + for((device) = (bus)->devices; (device); (device)=(device)->next) + +#define for_all_sbusdev(device, bus) \ + for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \ + for ((device) = (bus)->devices; (device); (device) = (device)->next) + +/* Driver DVMA interfaces. */ +#define sbus_can_dma_64bit(sdev) (1) +#define sbus_can_burst64(sdev) (1) +extern void sbus_set_sbus64(struct sbus_dev *, int); +extern void sbus_fill_device_irq(struct sbus_dev *); + +static inline void *sbus_alloc_consistent(struct sbus_dev *sdev , size_t size, + dma_addr_t *dma_handle) +{ + return dma_alloc_coherent(&sdev->ofdev.dev, size, + dma_handle, GFP_ATOMIC); +} + +static inline void sbus_free_consistent(struct sbus_dev *sdev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + return dma_free_coherent(&sdev->ofdev.dev, size, vaddr, dma_handle); +} + +#define SBUS_DMA_BIDIRECTIONAL DMA_BIDIRECTIONAL +#define SBUS_DMA_TODEVICE DMA_TO_DEVICE +#define SBUS_DMA_FROMDEVICE DMA_FROM_DEVICE +#define SBUS_DMA_NONE DMA_NONE + +/* All the rest use streaming mode mappings. */ +static inline dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *ptr, + size_t size, int direction) +{ + return dma_map_single(&sdev->ofdev.dev, ptr, size, + (enum dma_data_direction) direction); +} + +static inline void sbus_unmap_single(struct sbus_dev *sdev, + dma_addr_t dma_addr, size_t size, + int direction) +{ + dma_unmap_single(&sdev->ofdev.dev, dma_addr, size, + (enum dma_data_direction) direction); +} + +static inline int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, + int nents, int direction) +{ + return dma_map_sg(&sdev->ofdev.dev, sg, nents, + (enum dma_data_direction) direction); +} + +static inline void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, + int nents, int direction) +{ + dma_unmap_sg(&sdev->ofdev.dev, sg, nents, + (enum dma_data_direction) direction); +} + +/* Finally, allow explicit synchronization of streamable mappings. */ +static inline void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, + dma_addr_t dma_handle, + size_t size, int direction) +{ + dma_sync_single_for_cpu(&sdev->ofdev.dev, dma_handle, size, + (enum dma_data_direction) direction); +} +#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu + +static inline void sbus_dma_sync_single_for_device(struct sbus_dev *sdev, + dma_addr_t dma_handle, + size_t size, int direction) +{ + /* No flushing needed to sync cpu writes to the device. */ +} + +static inline void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, + struct scatterlist *sg, + int nents, int direction) +{ + dma_sync_sg_for_cpu(&sdev->ofdev.dev, sg, nents, + (enum dma_data_direction) direction); +} +#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu + +static inline void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev, + struct scatterlist *sg, + int nents, int direction) +{ + /* No flushing needed to sync cpu writes to the device. */ +} + +extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *); +extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *); +extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *); +extern int sbus_arch_preinit(void); +extern void sbus_arch_postinit(void); + +#endif /* !(_SPARC64_SBUS_H) */ diff --git a/arch/sparc/include/asm/scatterlist.h b/arch/sparc/include/asm/scatterlist.h new file mode 100644 index 00000000000..ec21a451764 --- /dev/null +++ b/arch/sparc/include/asm/scatterlist.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_SCATTERLIST_H +#define ___ASM_SPARC_SCATTERLIST_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/scatterlist_64.h> +#else +#include <asm/scatterlist_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/scatterlist_32.h b/arch/sparc/include/asm/scatterlist_32.h new file mode 100644 index 00000000000..c82609ca1d0 --- /dev/null +++ b/arch/sparc/include/asm/scatterlist_32.h @@ -0,0 +1,26 @@ +#ifndef _SPARC_SCATTERLIST_H +#define _SPARC_SCATTERLIST_H + +#include <linux/types.h> + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + + unsigned int length; + + __u32 dvma_address; /* A place to hang host-specific addresses at. */ + __u32 dvma_length; +}; + +#define sg_dma_address(sg) ((sg)->dvma_address) +#define sg_dma_len(sg) ((sg)->dvma_length) + +#define ISA_DMA_THRESHOLD (~0UL) + +#define ARCH_HAS_SG_CHAIN + +#endif /* !(_SPARC_SCATTERLIST_H) */ diff --git a/arch/sparc/include/asm/scatterlist_64.h b/arch/sparc/include/asm/scatterlist_64.h new file mode 100644 index 00000000000..81bd058f938 --- /dev/null +++ b/arch/sparc/include/asm/scatterlist_64.h @@ -0,0 +1,27 @@ +#ifndef _SPARC64_SCATTERLIST_H +#define _SPARC64_SCATTERLIST_H + +#include <asm/page.h> +#include <asm/types.h> + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + + unsigned int length; + + dma_addr_t dma_address; + __u32 dma_length; +}; + +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->dma_length) + +#define ISA_DMA_THRESHOLD (~0UL) + +#define ARCH_HAS_SG_CHAIN + +#endif /* !(_SPARC64_SCATTERLIST_H) */ diff --git a/arch/sparc/include/asm/scratchpad.h b/arch/sparc/include/asm/scratchpad.h new file mode 100644 index 00000000000..5e8b01fb334 --- /dev/null +++ b/arch/sparc/include/asm/scratchpad.h @@ -0,0 +1,14 @@ +#ifndef _SPARC64_SCRATCHPAD_H +#define _SPARC64_SCRATCHPAD_H + +/* Sun4v scratchpad registers, accessed via ASI_SCRATCHPAD. */ + +#define SCRATCHPAD_MMU_MISS 0x00 /* Shared with OBP - set by OBP */ +#define SCRATCHPAD_CPUID 0x08 /* Shared with OBP - set by hypervisor */ +#define SCRATCHPAD_UTSBREG1 0x10 +#define SCRATCHPAD_UTSBREG2 0x18 + /* 0x20 and 0x28, hypervisor only... */ +#define SCRATCHPAD_UNUSED1 0x30 +#define SCRATCHPAD_UNUSED2 0x38 /* Reserved for OBP */ + +#endif /* !(_SPARC64_SCRATCHPAD_H) */ diff --git a/arch/sparc/include/asm/seccomp.h b/arch/sparc/include/asm/seccomp.h new file mode 100644 index 00000000000..7fcd9968192 --- /dev/null +++ b/arch/sparc/include/asm/seccomp.h @@ -0,0 +1,21 @@ +#ifndef _ASM_SECCOMP_H + +#include <linux/thread_info.h> /* already defines TIF_32BIT */ + +#ifndef TIF_32BIT +#error "unexpected TIF_32BIT on sparc64" +#endif + +#include <linux/unistd.h> + +#define __NR_seccomp_read __NR_read +#define __NR_seccomp_write __NR_write +#define __NR_seccomp_exit __NR_exit +#define __NR_seccomp_sigreturn __NR_rt_sigreturn + +#define __NR_seccomp_read_32 __NR_read +#define __NR_seccomp_write_32 __NR_write +#define __NR_seccomp_exit_32 __NR_exit +#define __NR_seccomp_sigreturn_32 __NR_sigreturn + +#endif /* _ASM_SECCOMP_H */ diff --git a/arch/sparc/include/asm/sections.h b/arch/sparc/include/asm/sections.h new file mode 100644 index 00000000000..c7c69b00967 --- /dev/null +++ b/arch/sparc/include/asm/sections.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_SECTIONS_H +#define ___ASM_SPARC_SECTIONS_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/sections_64.h> +#else +#include <asm/sections_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/sections_32.h b/arch/sparc/include/asm/sections_32.h new file mode 100644 index 00000000000..6832841df05 --- /dev/null +++ b/arch/sparc/include/asm/sections_32.h @@ -0,0 +1,6 @@ +#ifndef _SPARC_SECTIONS_H +#define _SPARC_SECTIONS_H + +#include <asm-generic/sections.h> + +#endif diff --git a/arch/sparc/include/asm/sections_64.h b/arch/sparc/include/asm/sections_64.h new file mode 100644 index 00000000000..3f4b9fdc28d --- /dev/null +++ b/arch/sparc/include/asm/sections_64.h @@ -0,0 +1,9 @@ +#ifndef _SPARC64_SECTIONS_H +#define _SPARC64_SECTIONS_H + +/* nothing to see, move along */ +#include <asm-generic/sections.h> + +extern char _start[]; + +#endif diff --git a/arch/sparc/include/asm/sembuf.h b/arch/sparc/include/asm/sembuf.h new file mode 100644 index 00000000000..faee1be08d6 --- /dev/null +++ b/arch/sparc/include/asm/sembuf.h @@ -0,0 +1,31 @@ +#ifndef _SPARC_SEMBUF_H +#define _SPARC_SEMBUF_H + +/* + * The semid64_ds structure for sparc architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ +#if defined(__sparc__) && defined(__arch64__) +# define PADDING(x) +#else +# define PADDING(x) unsigned int x; +#endif + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + PADDING(__pad1) + __kernel_time_t sem_otime; /* last semop time */ + PADDING(__pad2) + __kernel_time_t sem_ctime; /* last change time */ + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused1; + unsigned long __unused2; +}; +#undef PADDING + +#endif /* _SPARC64_SEMBUF_H */ diff --git a/arch/sparc/include/asm/setup.h b/arch/sparc/include/asm/setup.h new file mode 100644 index 00000000000..2643c62f4ac --- /dev/null +++ b/arch/sparc/include/asm/setup.h @@ -0,0 +1,14 @@ +/* + * Just a place holder. + */ + +#ifndef _SPARC_SETUP_H +#define _SPARC_SETUP_H + +#if defined(__sparc__) && defined(__arch64__) +# define COMMAND_LINE_SIZE 2048 +#else +# define COMMAND_LINE_SIZE 256 +#endif + +#endif /* _SPARC_SETUP_H */ diff --git a/arch/sparc/include/asm/sfafsr.h b/arch/sparc/include/asm/sfafsr.h new file mode 100644 index 00000000000..e96137b04a4 --- /dev/null +++ b/arch/sparc/include/asm/sfafsr.h @@ -0,0 +1,82 @@ +#ifndef _SPARC64_SFAFSR_H +#define _SPARC64_SFAFSR_H + +#include <linux/const.h> + +/* Spitfire Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */ + +#define SFAFSR_ME (_AC(1,UL) << SFAFSR_ME_SHIFT) +#define SFAFSR_ME_SHIFT 32 +#define SFAFSR_PRIV (_AC(1,UL) << SFAFSR_PRIV_SHIFT) +#define SFAFSR_PRIV_SHIFT 31 +#define SFAFSR_ISAP (_AC(1,UL) << SFAFSR_ISAP_SHIFT) +#define SFAFSR_ISAP_SHIFT 30 +#define SFAFSR_ETP (_AC(1,UL) << SFAFSR_ETP_SHIFT) +#define SFAFSR_ETP_SHIFT 29 +#define SFAFSR_IVUE (_AC(1,UL) << SFAFSR_IVUE_SHIFT) +#define SFAFSR_IVUE_SHIFT 28 +#define SFAFSR_TO (_AC(1,UL) << SFAFSR_TO_SHIFT) +#define SFAFSR_TO_SHIFT 27 +#define SFAFSR_BERR (_AC(1,UL) << SFAFSR_BERR_SHIFT) +#define SFAFSR_BERR_SHIFT 26 +#define SFAFSR_LDP (_AC(1,UL) << SFAFSR_LDP_SHIFT) +#define SFAFSR_LDP_SHIFT 25 +#define SFAFSR_CP (_AC(1,UL) << SFAFSR_CP_SHIFT) +#define SFAFSR_CP_SHIFT 24 +#define SFAFSR_WP (_AC(1,UL) << SFAFSR_WP_SHIFT) +#define SFAFSR_WP_SHIFT 23 +#define SFAFSR_EDP (_AC(1,UL) << SFAFSR_EDP_SHIFT) +#define SFAFSR_EDP_SHIFT 22 +#define SFAFSR_UE (_AC(1,UL) << SFAFSR_UE_SHIFT) +#define SFAFSR_UE_SHIFT 21 +#define SFAFSR_CE (_AC(1,UL) << SFAFSR_CE_SHIFT) +#define SFAFSR_CE_SHIFT 20 +#define SFAFSR_ETS (_AC(0xf,UL) << SFAFSR_ETS_SHIFT) +#define SFAFSR_ETS_SHIFT 16 +#define SFAFSR_PSYND (_AC(0xffff,UL) << SFAFSR_PSYND_SHIFT) +#define SFAFSR_PSYND_SHIFT 0 + +/* UDB Error Register, ASI=0x7f VA<63:0>=0x0(High),0x18(Low) for read + * ASI=0x77 VA<63:0>=0x0(High),0x18(Low) for write + */ + +#define UDBE_UE (_AC(1,UL) << 9) +#define UDBE_CE (_AC(1,UL) << 8) +#define UDBE_E_SYNDR (_AC(0xff,UL) << 0) + +/* The trap handlers for asynchronous errors encode the AFSR and + * other pieces of information into a 64-bit argument for C code + * encoded as follows: + * + * ----------------------------------------------- + * | UDB_H | UDB_L | TL>1 | TT | AFSR | + * ----------------------------------------------- + * 63 54 53 44 42 41 33 32 0 + * + * The AFAR is passed in unchanged. + */ +#define SFSTAT_UDBH_MASK (_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT) +#define SFSTAT_UDBH_SHIFT 54 +#define SFSTAT_UDBL_MASK (_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT) +#define SFSTAT_UDBL_SHIFT 44 +#define SFSTAT_TL_GT_ONE (_AC(1,UL) << SFSTAT_TL_GT_ONE_SHIFT) +#define SFSTAT_TL_GT_ONE_SHIFT 42 +#define SFSTAT_TRAP_TYPE (_AC(0x1FF,UL) << SFSTAT_TRAP_TYPE_SHIFT) +#define SFSTAT_TRAP_TYPE_SHIFT 33 +#define SFSTAT_AFSR_MASK (_AC(0x1ffffffff,UL) << SFSTAT_AFSR_SHIFT) +#define SFSTAT_AFSR_SHIFT 0 + +/* ESTATE Error Enable Register, ASI=0x4b VA<63:0>=0x0 */ +#define ESTATE_ERR_CE 0x1 /* Correctable errors */ +#define ESTATE_ERR_NCE 0x2 /* TO, BERR, LDP, ETP, EDP, WP, UE, IVUE */ +#define ESTATE_ERR_ISAP 0x4 /* System address parity error */ +#define ESTATE_ERR_ALL (ESTATE_ERR_CE | \ + ESTATE_ERR_NCE | \ + ESTATE_ERR_ISAP) + +/* The various trap types that report using the above state. */ +#define TRAP_TYPE_IAE 0x09 /* Instruction Access Error */ +#define TRAP_TYPE_DAE 0x32 /* Data Access Error */ +#define TRAP_TYPE_CEE 0x63 /* Correctable ECC Error */ + +#endif /* _SPARC64_SFAFSR_H */ diff --git a/arch/sparc/include/asm/sfp-machine.h b/arch/sparc/include/asm/sfp-machine.h new file mode 100644 index 00000000000..4ebc3823ed4 --- /dev/null +++ b/arch/sparc/include/asm/sfp-machine.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_SFP_MACHINE_H +#define ___ASM_SPARC_SFP_MACHINE_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/sfp-machine_64.h> +#else +#include <asm/sfp-machine_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/sfp-machine_32.h b/arch/sparc/include/asm/sfp-machine_32.h new file mode 100644 index 00000000000..01d9c3b5a73 --- /dev/null +++ b/arch/sparc/include/asm/sfp-machine_32.h @@ -0,0 +1,212 @@ +/* Machine-dependent software floating-point definitions. + Sparc userland (_Q_*) version. + Copyright (C) 1997,1998,1999 Free Software Foundation, Inc. + This file is part of the GNU C Library. + Contributed by Richard Henderson (rth@cygnus.com), + Jakub Jelinek (jj@ultra.linux.cz), + David S. Miller (davem@redhat.com) and + Peter Maydell (pmaydell@chiark.greenend.org.uk). + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with the GNU C Library; see the file COPYING.LIB. If + not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef _SFP_MACHINE_H +#define _SFP_MACHINE_H + + +#define _FP_W_TYPE_SIZE 32 +#define _FP_W_TYPE unsigned long +#define _FP_WS_TYPE signed long +#define _FP_I_TYPE long + +#define _FP_MUL_MEAT_S(R,X,Y) \ + _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_D(R,X,Y) \ + _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_Q(R,X,Y) \ + _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm) + +#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y) +#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y) +#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y) + +#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1) +#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1 +#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1 +#define _FP_NANSIGN_S 0 +#define _FP_NANSIGN_D 0 +#define _FP_NANSIGN_Q 0 + +#define _FP_KEEPNANFRACP 1 + +/* If one NaN is signaling and the other is not, + * we choose that one, otherwise we choose X. + */ +/* For _Qp_* and _Q_*, this should prefer X, for + * CPU instruction emulation this should prefer Y. + * (see SPAMv9 B.2.2 section). + */ +#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \ + do { \ + if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs) \ + && !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)) \ + { \ + R##_s = X##_s; \ + _FP_FRAC_COPY_##wc(R,X); \ + } \ + else \ + { \ + R##_s = Y##_s; \ + _FP_FRAC_COPY_##wc(R,Y); \ + } \ + R##_c = FP_CLS_NAN; \ + } while (0) + +/* Some assembly to speed things up. */ +#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) \ + __asm__ ("addcc %r7,%8,%2\n\t" \ + "addxcc %r5,%6,%1\n\t" \ + "addx %r3,%4,%0\n" \ + : "=r" ((USItype)(r2)), \ + "=&r" ((USItype)(r1)), \ + "=&r" ((USItype)(r0)) \ + : "%rJ" ((USItype)(x2)), \ + "rI" ((USItype)(y2)), \ + "%rJ" ((USItype)(x1)), \ + "rI" ((USItype)(y1)), \ + "%rJ" ((USItype)(x0)), \ + "rI" ((USItype)(y0)) \ + : "cc") + +#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) \ + __asm__ ("subcc %r7,%8,%2\n\t" \ + "subxcc %r5,%6,%1\n\t" \ + "subx %r3,%4,%0\n" \ + : "=r" ((USItype)(r2)), \ + "=&r" ((USItype)(r1)), \ + "=&r" ((USItype)(r0)) \ + : "%rJ" ((USItype)(x2)), \ + "rI" ((USItype)(y2)), \ + "%rJ" ((USItype)(x1)), \ + "rI" ((USItype)(y1)), \ + "%rJ" ((USItype)(x0)), \ + "rI" ((USItype)(y0)) \ + : "cc") + +#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \ + do { \ + /* We need to fool gcc, as we need to pass more than 10 \ + input/outputs. */ \ + register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2"); \ + __asm__ __volatile__ ( \ + "addcc %r8,%9,%1\n\t" \ + "addxcc %r6,%7,%0\n\t" \ + "addxcc %r4,%5,%%g2\n\t" \ + "addx %r2,%3,%%g1\n\t" \ + : "=&r" ((USItype)(r1)), \ + "=&r" ((USItype)(r0)) \ + : "%rJ" ((USItype)(x3)), \ + "rI" ((USItype)(y3)), \ + "%rJ" ((USItype)(x2)), \ + "rI" ((USItype)(y2)), \ + "%rJ" ((USItype)(x1)), \ + "rI" ((USItype)(y1)), \ + "%rJ" ((USItype)(x0)), \ + "rI" ((USItype)(y0)) \ + : "cc", "g1", "g2"); \ + __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2)); \ + r3 = _t1; r2 = _t2; \ + } while (0) + +#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \ + do { \ + /* We need to fool gcc, as we need to pass more than 10 \ + input/outputs. */ \ + register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2"); \ + __asm__ __volatile__ ( \ + "subcc %r8,%9,%1\n\t" \ + "subxcc %r6,%7,%0\n\t" \ + "subxcc %r4,%5,%%g2\n\t" \ + "subx %r2,%3,%%g1\n\t" \ + : "=&r" ((USItype)(r1)), \ + "=&r" ((USItype)(r0)) \ + : "%rJ" ((USItype)(x3)), \ + "rI" ((USItype)(y3)), \ + "%rJ" ((USItype)(x2)), \ + "rI" ((USItype)(y2)), \ + "%rJ" ((USItype)(x1)), \ + "rI" ((USItype)(y1)), \ + "%rJ" ((USItype)(x0)), \ + "rI" ((USItype)(y0)) \ + : "cc", "g1", "g2"); \ + __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2)); \ + r3 = _t1; r2 = _t2; \ + } while (0) + +#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0) __FP_FRAC_SUB_3(x2,x1,x0,x2,x1,x0,y2,y1,y0) + +#define __FP_FRAC_DEC_4(x3,x2,x1,x0,y3,y2,y1,y0) __FP_FRAC_SUB_4(x3,x2,x1,x0,x3,x2,x1,x0,y3,y2,y1,y0) + +#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i) \ + __asm__ ("addcc %3,%4,%3\n\t" \ + "addxcc %2,%%g0,%2\n\t" \ + "addxcc %1,%%g0,%1\n\t" \ + "addx %0,%%g0,%0\n\t" \ + : "=&r" ((USItype)(x3)), \ + "=&r" ((USItype)(x2)), \ + "=&r" ((USItype)(x1)), \ + "=&r" ((USItype)(x0)) \ + : "rI" ((USItype)(i)), \ + "0" ((USItype)(x3)), \ + "1" ((USItype)(x2)), \ + "2" ((USItype)(x1)), \ + "3" ((USItype)(x0)) \ + : "cc") + +#ifndef CONFIG_SMP +extern struct task_struct *last_task_used_math; +#endif + +/* Obtain the current rounding mode. */ +#ifndef FP_ROUNDMODE +#ifdef CONFIG_SMP +#define FP_ROUNDMODE ((current->thread.fsr >> 30) & 0x3) +#else +#define FP_ROUNDMODE ((last_task_used_math->thread.fsr >> 30) & 0x3) +#endif +#endif + +/* Exception flags. */ +#define FP_EX_INVALID (1 << 4) +#define FP_EX_OVERFLOW (1 << 3) +#define FP_EX_UNDERFLOW (1 << 2) +#define FP_EX_DIVZERO (1 << 1) +#define FP_EX_INEXACT (1 << 0) + +#define FP_HANDLE_EXCEPTIONS return _fex + +#ifdef CONFIG_SMP +#define FP_INHIBIT_RESULTS ((current->thread.fsr >> 23) & _fex) +#else +#define FP_INHIBIT_RESULTS ((last_task_used_math->thread.fsr >> 23) & _fex) +#endif + +#ifdef CONFIG_SMP +#define FP_TRAPPING_EXCEPTIONS ((current->thread.fsr >> 23) & 0x1f) +#else +#define FP_TRAPPING_EXCEPTIONS ((last_task_used_math->thread.fsr >> 23) & 0x1f) +#endif + +#endif diff --git a/arch/sparc/include/asm/sfp-machine_64.h b/arch/sparc/include/asm/sfp-machine_64.h new file mode 100644 index 00000000000..ca913ef40bd --- /dev/null +++ b/arch/sparc/include/asm/sfp-machine_64.h @@ -0,0 +1,93 @@ +/* Machine-dependent software floating-point definitions. + Sparc64 kernel version. + Copyright (C) 1997,1998,1999 Free Software Foundation, Inc. + This file is part of the GNU C Library. + Contributed by Richard Henderson (rth@cygnus.com), + Jakub Jelinek (jj@ultra.linux.cz) and + David S. Miller (davem@redhat.com). + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with the GNU C Library; see the file COPYING.LIB. If + not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef _SFP_MACHINE_H +#define _SFP_MACHINE_H + +#define _FP_W_TYPE_SIZE 64 +#define _FP_W_TYPE unsigned long +#define _FP_WS_TYPE signed long +#define _FP_I_TYPE long + +#define _FP_MUL_MEAT_S(R,X,Y) \ + _FP_MUL_MEAT_1_imm(_FP_WFRACBITS_S,R,X,Y) +#define _FP_MUL_MEAT_D(R,X,Y) \ + _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_Q(R,X,Y) \ + _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm) + +#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm) +#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_1_udiv_norm(D,R,X,Y) +#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_2_udiv(Q,R,X,Y) + +#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1) +#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1) +#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1 +#define _FP_NANSIGN_S 0 +#define _FP_NANSIGN_D 0 +#define _FP_NANSIGN_Q 0 + +#define _FP_KEEPNANFRACP 1 + +/* If one NaN is signaling and the other is not, + * we choose that one, otherwise we choose X. + */ +/* For _Qp_* and _Q_*, this should prefer X, for + * CPU instruction emulation this should prefer Y. + * (see SPAMv9 B.2.2 section). + */ +#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \ + do { \ + if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs) \ + && !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)) \ + { \ + R##_s = X##_s; \ + _FP_FRAC_COPY_##wc(R,X); \ + } \ + else \ + { \ + R##_s = Y##_s; \ + _FP_FRAC_COPY_##wc(R,Y); \ + } \ + R##_c = FP_CLS_NAN; \ + } while (0) + +/* Obtain the current rounding mode. */ +#ifndef FP_ROUNDMODE +#define FP_ROUNDMODE ((current_thread_info()->xfsr[0] >> 30) & 0x3) +#endif + +/* Exception flags. */ +#define FP_EX_INVALID (1 << 4) +#define FP_EX_OVERFLOW (1 << 3) +#define FP_EX_UNDERFLOW (1 << 2) +#define FP_EX_DIVZERO (1 << 1) +#define FP_EX_INEXACT (1 << 0) + +#define FP_HANDLE_EXCEPTIONS return _fex + +#define FP_INHIBIT_RESULTS ((current_thread_info()->xfsr[0] >> 23) & _fex) + +#define FP_TRAPPING_EXCEPTIONS ((current_thread_info()->xfsr[0] >> 23) & 0x1f) + +#endif diff --git a/arch/sparc/include/asm/shmbuf.h b/arch/sparc/include/asm/shmbuf.h new file mode 100644 index 00000000000..83a16055363 --- /dev/null +++ b/arch/sparc/include/asm/shmbuf.h @@ -0,0 +1,50 @@ +#ifndef _SPARC_SHMBUF_H +#define _SPARC_SHMBUF_H + +/* + * The shmid64_ds structure for sparc architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +#if defined(__sparc__) && defined(__arch64__) +# define PADDING(x) +#else +# define PADDING(x) unsigned int x; +#endif + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + PADDING(__pad1) + __kernel_time_t shm_atime; /* last attach time */ + PADDING(__pad2) + __kernel_time_t shm_dtime; /* last detach time */ + PADDING(__pad3) + __kernel_time_t shm_ctime; /* last change time */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused1; + unsigned long __unused2; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#undef PADDING + +#endif /* _SPARC_SHMBUF_H */ diff --git a/arch/sparc/include/asm/shmparam.h b/arch/sparc/include/asm/shmparam.h new file mode 100644 index 00000000000..8bf0cfe0694 --- /dev/null +++ b/arch/sparc/include/asm/shmparam.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_SHMPARAM_H +#define ___ASM_SPARC_SHMPARAM_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/shmparam_64.h> +#else +#include <asm/shmparam_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/shmparam_32.h b/arch/sparc/include/asm/shmparam_32.h new file mode 100644 index 00000000000..59a1243c12f --- /dev/null +++ b/arch/sparc/include/asm/shmparam_32.h @@ -0,0 +1,11 @@ +#ifndef _ASMSPARC_SHMPARAM_H +#define _ASMSPARC_SHMPARAM_H + +#define __ARCH_FORCE_SHMLBA 1 + +extern int vac_cache_size; +#define SHMLBA (vac_cache_size ? vac_cache_size : \ + (sparc_cpu_model == sun4c ? (64 * 1024) : \ + (sparc_cpu_model == sun4 ? (128 * 1024) : PAGE_SIZE))) + +#endif /* _ASMSPARC_SHMPARAM_H */ diff --git a/arch/sparc/include/asm/shmparam_64.h b/arch/sparc/include/asm/shmparam_64.h new file mode 100644 index 00000000000..1ed0d6701a9 --- /dev/null +++ b/arch/sparc/include/asm/shmparam_64.h @@ -0,0 +1,10 @@ +#ifndef _ASMSPARC64_SHMPARAM_H +#define _ASMSPARC64_SHMPARAM_H + +#include <asm/spitfire.h> + +#define __ARCH_FORCE_SHMLBA 1 +/* attach addr a multiple of this */ +#define SHMLBA ((PAGE_SIZE > L1DCACHE_SIZE) ? PAGE_SIZE : L1DCACHE_SIZE) + +#endif /* _ASMSPARC64_SHMPARAM_H */ diff --git a/arch/sparc/include/asm/sigcontext.h b/arch/sparc/include/asm/sigcontext.h new file mode 100644 index 00000000000..e92de7e286b --- /dev/null +++ b/arch/sparc/include/asm/sigcontext.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_SIGCONTEXT_H +#define ___ASM_SPARC_SIGCONTEXT_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/sigcontext_64.h> +#else +#include <asm/sigcontext_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/sigcontext_32.h b/arch/sparc/include/asm/sigcontext_32.h new file mode 100644 index 00000000000..c5fb60dcbd7 --- /dev/null +++ b/arch/sparc/include/asm/sigcontext_32.h @@ -0,0 +1,62 @@ +#ifndef __SPARC_SIGCONTEXT_H +#define __SPARC_SIGCONTEXT_H + +#ifdef __KERNEL__ +#include <asm/ptrace.h> + +#ifndef __ASSEMBLY__ + +#define __SUNOS_MAXWIN 31 + +/* This is what SunOS does, so shall I. */ +struct sigcontext { + int sigc_onstack; /* state to restore */ + int sigc_mask; /* sigmask to restore */ + int sigc_sp; /* stack pointer */ + int sigc_pc; /* program counter */ + int sigc_npc; /* next program counter */ + int sigc_psr; /* for condition codes etc */ + int sigc_g1; /* User uses these two registers */ + int sigc_o0; /* within the trampoline code. */ + + /* Now comes information regarding the users window set + * at the time of the signal. + */ + int sigc_oswins; /* outstanding windows */ + + /* stack ptrs for each regwin buf */ + char *sigc_spbuf[__SUNOS_MAXWIN]; + + /* Windows to restore after signal */ + struct { + unsigned long locals[8]; + unsigned long ins[8]; + } sigc_wbuf[__SUNOS_MAXWIN]; +}; + +typedef struct { + struct { + unsigned long psr; + unsigned long pc; + unsigned long npc; + unsigned long y; + unsigned long u_regs[16]; /* globals and ins */ + } si_regs; + int si_mask; +} __siginfo_t; + +typedef struct { + unsigned long si_float_regs [32]; + unsigned long si_fsr; + unsigned long si_fpqdepth; + struct { + unsigned long *insn_addr; + unsigned long insn; + } si_fpqueue [16]; +} __siginfo_fpu_t; + +#endif /* !(__ASSEMBLY__) */ + +#endif /* (__KERNEL__) */ + +#endif /* !(__SPARC_SIGCONTEXT_H) */ diff --git a/arch/sparc/include/asm/sigcontext_64.h b/arch/sparc/include/asm/sigcontext_64.h new file mode 100644 index 00000000000..1c868d680cf --- /dev/null +++ b/arch/sparc/include/asm/sigcontext_64.h @@ -0,0 +1,87 @@ +#ifndef __SPARC64_SIGCONTEXT_H +#define __SPARC64_SIGCONTEXT_H + +#ifdef __KERNEL__ +#include <asm/ptrace.h> +#endif + +#ifndef __ASSEMBLY__ + +#ifdef __KERNEL__ + +#define __SUNOS_MAXWIN 31 + +/* This is what SunOS does, so shall I unless we use new 32bit signals or rt signals. */ +struct sigcontext32 { + int sigc_onstack; /* state to restore */ + int sigc_mask; /* sigmask to restore */ + int sigc_sp; /* stack pointer */ + int sigc_pc; /* program counter */ + int sigc_npc; /* next program counter */ + int sigc_psr; /* for condition codes etc */ + int sigc_g1; /* User uses these two registers */ + int sigc_o0; /* within the trampoline code. */ + + /* Now comes information regarding the users window set + * at the time of the signal. + */ + int sigc_oswins; /* outstanding windows */ + + /* stack ptrs for each regwin buf */ + unsigned sigc_spbuf[__SUNOS_MAXWIN]; + + /* Windows to restore after signal */ + struct reg_window32 sigc_wbuf[__SUNOS_MAXWIN]; +}; + +#endif + +#ifdef __KERNEL__ + +/* This is what we use for 32bit new non-rt signals. */ + +typedef struct { + struct { + unsigned int psr; + unsigned int pc; + unsigned int npc; + unsigned int y; + unsigned int u_regs[16]; /* globals and ins */ + } si_regs; + int si_mask; +} __siginfo32_t; + +#endif + +typedef struct { + unsigned int si_float_regs [64]; + unsigned long si_fsr; + unsigned long si_gsr; + unsigned long si_fprs; +} __siginfo_fpu_t; + +/* This is what SunOS doesn't, so we have to write this alone + and do it properly. */ +struct sigcontext { + /* The size of this array has to match SI_MAX_SIZE from siginfo.h */ + char sigc_info[128]; + struct { + unsigned long u_regs[16]; /* globals and ins */ + unsigned long tstate; + unsigned long tpc; + unsigned long tnpc; + unsigned int y; + unsigned int fprs; + } sigc_regs; + __siginfo_fpu_t * sigc_fpu_save; + struct { + void * ss_sp; + int ss_flags; + unsigned long ss_size; + } sigc_stack; + unsigned long sigc_mask; +}; + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(__SPARC64_SIGCONTEXT_H) */ diff --git a/arch/sparc/include/asm/siginfo.h b/arch/sparc/include/asm/siginfo.h new file mode 100644 index 00000000000..bd81f8d7f5c --- /dev/null +++ b/arch/sparc/include/asm/siginfo.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_SIGINFO_H +#define ___ASM_SPARC_SIGINFO_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/siginfo_64.h> +#else +#include <asm/siginfo_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/siginfo_32.h b/arch/sparc/include/asm/siginfo_32.h new file mode 100644 index 00000000000..3c71af135c5 --- /dev/null +++ b/arch/sparc/include/asm/siginfo_32.h @@ -0,0 +1,17 @@ +#ifndef _SPARC_SIGINFO_H +#define _SPARC_SIGINFO_H + +#define __ARCH_SI_UID_T unsigned int +#define __ARCH_SI_TRAPNO + +#include <asm-generic/siginfo.h> + +#define SI_NOINFO 32767 /* no information in siginfo_t */ + +/* + * SIGEMT si_codes + */ +#define EMT_TAGOVF (__SI_FAULT|1) /* tag overflow */ +#define NSIGEMT 1 + +#endif /* !(_SPARC_SIGINFO_H) */ diff --git a/arch/sparc/include/asm/siginfo_64.h b/arch/sparc/include/asm/siginfo_64.h new file mode 100644 index 00000000000..c96e6c30f8b --- /dev/null +++ b/arch/sparc/include/asm/siginfo_64.h @@ -0,0 +1,32 @@ +#ifndef _SPARC64_SIGINFO_H +#define _SPARC64_SIGINFO_H + +#define SI_PAD_SIZE32 ((SI_MAX_SIZE/sizeof(int)) - 3) + +#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) +#define __ARCH_SI_TRAPNO +#define __ARCH_SI_BAND_T int + +#include <asm-generic/siginfo.h> + +#ifdef __KERNEL__ + +#include <linux/compat.h> + +#ifdef CONFIG_COMPAT + +struct compat_siginfo; + +#endif /* CONFIG_COMPAT */ + +#endif /* __KERNEL__ */ + +#define SI_NOINFO 32767 /* no information in siginfo_t */ + +/* + * SIGEMT si_codes + */ +#define EMT_TAGOVF (__SI_FAULT|1) /* tag overflow */ +#define NSIGEMT 1 + +#endif diff --git a/arch/sparc/include/asm/signal.h b/arch/sparc/include/asm/signal.h new file mode 100644 index 00000000000..27ab05dc203 --- /dev/null +++ b/arch/sparc/include/asm/signal.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_SIGNAL_H +#define ___ASM_SPARC_SIGNAL_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/signal_64.h> +#else +#include <asm/signal_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/signal_32.h b/arch/sparc/include/asm/signal_32.h new file mode 100644 index 00000000000..96a60ab03ca --- /dev/null +++ b/arch/sparc/include/asm/signal_32.h @@ -0,0 +1,207 @@ +#ifndef _ASMSPARC_SIGNAL_H +#define _ASMSPARC_SIGNAL_H + +#include <asm/sigcontext.h> +#include <linux/compiler.h> + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ +#include <linux/personality.h> +#include <linux/types.h> +#endif +#endif + +/* On the Sparc the signal handlers get passed a 'sub-signal' code + * for certain signal types, which we document here. + */ +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SUBSIG_STACK 0 +#define SUBSIG_ILLINST 2 +#define SUBSIG_PRIVINST 3 +#define SUBSIG_BADTRAP(t) (0x80 + (t)) + +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 + +#define SIGEMT 7 +#define SUBSIG_TAG 10 + +#define SIGFPE 8 +#define SUBSIG_FPDISABLED 0x400 +#define SUBSIG_FPERROR 0x404 +#define SUBSIG_FPINTOVFL 0x001 +#define SUBSIG_FPSTSIG 0x002 +#define SUBSIG_IDIVZERO 0x014 +#define SUBSIG_FPINEXACT 0x0c4 +#define SUBSIG_FPDIVZERO 0x0c8 +#define SUBSIG_FPUNFLOW 0x0cc +#define SUBSIG_FPOPERROR 0x0d0 +#define SUBSIG_FPOVFLOW 0x0d4 + +#define SIGKILL 9 +#define SIGBUS 10 +#define SUBSIG_BUSTIMEOUT 1 +#define SUBSIG_ALIGNMENT 2 +#define SUBSIG_MISCERROR 5 + +#define SIGSEGV 11 +#define SUBSIG_NOMAPPING 3 +#define SUBSIG_PROTECTION 4 +#define SUBSIG_SEGERROR 5 + +#define SIGSYS 12 + +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGURG 16 + +/* SunOS values which deviate from the Linux/i386 ones */ +#define SIGSTOP 17 +#define SIGTSTP 18 +#define SIGCONT 19 +#define SIGCHLD 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGIO 23 +#define SIGPOLL SIGIO /* SysV name for SIGIO */ +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGLOST 29 +#define SIGPWR SIGLOST +#define SIGUSR1 30 +#define SIGUSR2 31 + +/* Most things should be clean enough to redefine this at will, if care + * is taken to make libc match. + */ + +#define __OLD_NSIG 32 +#define __NEW_NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (__NEW_NSIG / _NSIG_BPW) + +#define SIGRTMIN 32 +#define SIGRTMAX __NEW_NSIG + +#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__) +#define _NSIG __NEW_NSIG +#define __new_sigset_t sigset_t +#define __new_sigaction sigaction +#define __old_sigset_t old_sigset_t +#define __old_sigaction old_sigaction +#else +#define _NSIG __OLD_NSIG +#define __old_sigset_t sigset_t +#define __old_sigaction sigaction +#endif + +#ifndef __ASSEMBLY__ + +typedef unsigned long __old_sigset_t; + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} __new_sigset_t; + + +#ifdef __KERNEL__ +/* A SunOS sigstack */ +struct sigstack { + char *the_stack; + int cur_status; +}; +#endif + +/* Sigvec flags */ +#define _SV_SSTACK 1u /* This signal handler should use sig-stack */ +#define _SV_INTR 2u /* Sig return should not restart system call */ +#define _SV_RESET 4u /* Set handler to SIG_DFL upon taken signal */ +#define _SV_IGNCHILD 8u /* Do not send SIGCHLD */ + +/* + * sa_flags values: SA_STACK is not currently supported, but will allow the + * usage of signal stacks by using the (now obsolete) sa_restorer field in + * the sigaction structure as a stack pointer. This is now possible due to + * the changes in signal handling. LBT 010493. + * SA_RESTART flag to get restarting signals (which were the default long ago) + */ +#define SA_NOCLDSTOP _SV_IGNCHILD +#define SA_STACK _SV_SSTACK +#define SA_ONSTACK _SV_SSTACK +#define SA_RESTART _SV_INTR +#define SA_ONESHOT _SV_RESET +#define SA_NOMASK 0x20u +#define SA_NOCLDWAIT 0x100u +#define SA_SIGINFO 0x200u + +#define SIG_BLOCK 0x01 /* for blocking signals */ +#define SIG_UNBLOCK 0x02 /* for unblocking signals */ +#define SIG_SETMASK 0x04 /* for setting the signal mask */ + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 4096 +#define SIGSTKSZ 16384 + +#ifdef __KERNEL__ +/* + * DJHR + * SA_STATIC_ALLOC is used for the SPARC system to indicate that this + * interrupt handler's irq structure should be statically allocated + * by the request_irq routine. + * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge + * of interrupt usage and that sucks. Also without a flag like this + * it may be possible for the free_irq routine to attempt to free + * statically allocated data.. which is NOT GOOD. + * + */ +#define SA_STATIC_ALLOC 0x8000 +#endif + +#include <asm-generic/signal.h> + +#ifdef __KERNEL__ +struct __new_sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer)(void); /* Not used by Linux/SPARC */ + __new_sigset_t sa_mask; +}; + +struct k_sigaction { + struct __new_sigaction sa; + void __user *ka_restorer; +}; + +struct __old_sigaction { + __sighandler_t sa_handler; + __old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer) (void); /* not used by Linux/SPARC */ +}; + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* !(__KERNEL__) */ + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_ASMSPARC_SIGNAL_H) */ diff --git a/arch/sparc/include/asm/signal_64.h b/arch/sparc/include/asm/signal_64.h new file mode 100644 index 00000000000..ab1509a101c --- /dev/null +++ b/arch/sparc/include/asm/signal_64.h @@ -0,0 +1,194 @@ +#ifndef _ASMSPARC64_SIGNAL_H +#define _ASMSPARC64_SIGNAL_H + +#include <asm/sigcontext.h> + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ +#include <linux/personality.h> +#include <linux/types.h> +#endif +#endif + +/* On the Sparc the signal handlers get passed a 'sub-signal' code + * for certain signal types, which we document here. + */ +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SUBSIG_STACK 0 +#define SUBSIG_ILLINST 2 +#define SUBSIG_PRIVINST 3 +#define SUBSIG_BADTRAP(t) (0x80 + (t)) + +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 + +#define SIGEMT 7 +#define SUBSIG_TAG 10 + +#define SIGFPE 8 +#define SUBSIG_FPDISABLED 0x400 +#define SUBSIG_FPERROR 0x404 +#define SUBSIG_FPINTOVFL 0x001 +#define SUBSIG_FPSTSIG 0x002 +#define SUBSIG_IDIVZERO 0x014 +#define SUBSIG_FPINEXACT 0x0c4 +#define SUBSIG_FPDIVZERO 0x0c8 +#define SUBSIG_FPUNFLOW 0x0cc +#define SUBSIG_FPOPERROR 0x0d0 +#define SUBSIG_FPOVFLOW 0x0d4 + +#define SIGKILL 9 +#define SIGBUS 10 +#define SUBSIG_BUSTIMEOUT 1 +#define SUBSIG_ALIGNMENT 2 +#define SUBSIG_MISCERROR 5 + +#define SIGSEGV 11 +#define SUBSIG_NOMAPPING 3 +#define SUBSIG_PROTECTION 4 +#define SUBSIG_SEGERROR 5 + +#define SIGSYS 12 + +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGURG 16 + +/* SunOS values which deviate from the Linux/i386 ones */ +#define SIGSTOP 17 +#define SIGTSTP 18 +#define SIGCONT 19 +#define SIGCHLD 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGIO 23 +#define SIGPOLL SIGIO /* SysV name for SIGIO */ +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGLOST 29 +#define SIGPWR SIGLOST +#define SIGUSR1 30 +#define SIGUSR2 31 + +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define __OLD_NSIG 32 +#define __NEW_NSIG 64 +#define _NSIG_BPW 64 +#define _NSIG_WORDS (__NEW_NSIG / _NSIG_BPW) + +#define SIGRTMIN 32 +#define SIGRTMAX __NEW_NSIG + +#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__) +#define _NSIG __NEW_NSIG +#define __new_sigset_t sigset_t +#define __new_sigaction sigaction +#define __new_sigaction32 sigaction32 +#define __old_sigset_t old_sigset_t +#define __old_sigaction old_sigaction +#define __old_sigaction32 old_sigaction32 +#else +#define _NSIG __OLD_NSIG +#define NSIG _NSIG +#define __old_sigset_t sigset_t +#define __old_sigaction sigaction +#define __old_sigaction32 sigaction32 +#endif + +#ifndef __ASSEMBLY__ + +typedef unsigned long __old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} __new_sigset_t; + +/* A SunOS sigstack */ +struct sigstack { + /* XXX 32-bit pointers pinhead XXX */ + char *the_stack; + int cur_status; +}; + +/* Sigvec flags */ +#define _SV_SSTACK 1u /* This signal handler should use sig-stack */ +#define _SV_INTR 2u /* Sig return should not restart system call */ +#define _SV_RESET 4u /* Set handler to SIG_DFL upon taken signal */ +#define _SV_IGNCHILD 8u /* Do not send SIGCHLD */ + +/* + * sa_flags values: SA_STACK is not currently supported, but will allow the + * usage of signal stacks by using the (now obsolete) sa_restorer field in + * the sigaction structure as a stack pointer. This is now possible due to + * the changes in signal handling. LBT 010493. + * SA_RESTART flag to get restarting signals (which were the default long ago) + */ +#define SA_NOCLDSTOP _SV_IGNCHILD +#define SA_STACK _SV_SSTACK +#define SA_ONSTACK _SV_SSTACK +#define SA_RESTART _SV_INTR +#define SA_ONESHOT _SV_RESET +#define SA_NOMASK 0x20u +#define SA_NOCLDWAIT 0x100u +#define SA_SIGINFO 0x200u + + +#define SIG_BLOCK 0x01 /* for blocking signals */ +#define SIG_UNBLOCK 0x02 /* for unblocking signals */ +#define SIG_SETMASK 0x04 /* for setting the signal mask */ + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 4096 +#define SIGSTKSZ 16384 + +#include <asm-generic/signal.h> + +struct __new_sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + __sigrestore_t sa_restorer; /* not used by Linux/SPARC yet */ + __new_sigset_t sa_mask; +}; + +struct __old_sigaction { + __sighandler_t sa_handler; + __old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); /* not used by Linux/SPARC yet */ +}; + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ + +struct k_sigaction { + struct __new_sigaction sa; + void __user *ka_restorer; +}; + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* !(__KERNEL__) */ + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_ASMSPARC64_SIGNAL_H) */ diff --git a/arch/sparc/include/asm/smp.h b/arch/sparc/include/asm/smp.h new file mode 100644 index 00000000000..b59672d0e19 --- /dev/null +++ b/arch/sparc/include/asm/smp.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_SMP_H +#define ___ASM_SPARC_SMP_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/smp_64.h> +#else +#include <asm/smp_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/smp_32.h b/arch/sparc/include/asm/smp_32.h new file mode 100644 index 00000000000..7201752cf93 --- /dev/null +++ b/arch/sparc/include/asm/smp_32.h @@ -0,0 +1,173 @@ +/* smp.h: Sparc specific SMP stuff. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_SMP_H +#define _SPARC_SMP_H + +#include <linux/threads.h> +#include <asm/head.h> +#include <asm/btfixup.h> + +#ifndef __ASSEMBLY__ + +#include <linux/cpumask.h> + +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_SMP + +#ifndef __ASSEMBLY__ + +#include <asm/ptrace.h> +#include <asm/asi.h> +#include <asm/atomic.h> + +/* + * Private routines/data + */ + +extern unsigned char boot_cpu_id; +extern cpumask_t phys_cpu_present_map; +#define cpu_possible_map phys_cpu_present_map + +typedef void (*smpfunc_t)(unsigned long, unsigned long, unsigned long, + unsigned long, unsigned long); + +/* + * General functions that each host system must provide. + */ + +void sun4m_init_smp(void); +void sun4d_init_smp(void); + +void smp_callin(void); +void smp_boot_cpus(void); +void smp_store_cpu_info(int); + +struct seq_file; +void smp_bogo(struct seq_file *); +void smp_info(struct seq_file *); + +BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long) +BTFIXUPDEF_CALL(int, __hard_smp_processor_id, void) +BTFIXUPDEF_BLACKBOX(hard_smp_processor_id) +BTFIXUPDEF_BLACKBOX(load_current) + +#define smp_cross_call(func,arg1,arg2,arg3,arg4,arg5) BTFIXUP_CALL(smp_cross_call)(func,arg1,arg2,arg3,arg4,arg5) + +static inline void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); } +static inline void xc1(smpfunc_t func, unsigned long arg1) +{ smp_cross_call(func, arg1, 0, 0, 0, 0); } +static inline void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2) +{ smp_cross_call(func, arg1, arg2, 0, 0, 0); } +static inline void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2, + unsigned long arg3) +{ smp_cross_call(func, arg1, arg2, arg3, 0, 0); } +static inline void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2, + unsigned long arg3, unsigned long arg4) +{ smp_cross_call(func, arg1, arg2, arg3, arg4, 0); } +static inline void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2, + unsigned long arg3, unsigned long arg4, unsigned long arg5) +{ smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); } + +static inline int smp_call_function(void (*func)(void *info), void *info, int wait) +{ + xc1((smpfunc_t)func, (unsigned long)info); + return 0; +} + +static inline int cpu_logical_map(int cpu) +{ + return cpu; +} + +static inline int hard_smp4m_processor_id(void) +{ + int cpuid; + + __asm__ __volatile__("rd %%tbr, %0\n\t" + "srl %0, 12, %0\n\t" + "and %0, 3, %0\n\t" : + "=&r" (cpuid)); + return cpuid; +} + +static inline int hard_smp4d_processor_id(void) +{ + int cpuid; + + __asm__ __volatile__("lda [%%g0] %1, %0\n\t" : + "=&r" (cpuid) : "i" (ASI_M_VIKING_TMP1)); + return cpuid; +} + +#ifndef MODULE +static inline int hard_smp_processor_id(void) +{ + int cpuid; + + /* Black box - sun4m + __asm__ __volatile__("rd %%tbr, %0\n\t" + "srl %0, 12, %0\n\t" + "and %0, 3, %0\n\t" : + "=&r" (cpuid)); + - sun4d + __asm__ __volatile__("lda [%g0] ASI_M_VIKING_TMP1, %0\n\t" + "nop; nop" : + "=&r" (cpuid)); + See btfixup.h and btfixupprep.c to understand how a blackbox works. + */ + __asm__ __volatile__("sethi %%hi(___b_hard_smp_processor_id), %0\n\t" + "sethi %%hi(boot_cpu_id), %0\n\t" + "ldub [%0 + %%lo(boot_cpu_id)], %0\n\t" : + "=&r" (cpuid)); + return cpuid; +} +#else +static inline int hard_smp_processor_id(void) +{ + int cpuid; + + __asm__ __volatile__("mov %%o7, %%g1\n\t" + "call ___f___hard_smp_processor_id\n\t" + " nop\n\t" + "mov %%g2, %0\n\t" : "=r"(cpuid) : : "g1", "g2"); + return cpuid; +} +#endif + +#define raw_smp_processor_id() (current_thread_info()->cpu) + +#define prof_multiplier(__cpu) cpu_data(__cpu).multiplier +#define prof_counter(__cpu) cpu_data(__cpu).counter + +void smp_setup_cpu_possible_map(void); + +#endif /* !(__ASSEMBLY__) */ + +/* Sparc specific messages. */ +#define MSG_CROSS_CALL 0x0005 /* run func on cpus */ + +/* Empirical PROM processor mailbox constants. If the per-cpu mailbox + * contains something other than one of these then the ipi is from + * Linux's active_kernel_processor. This facility exists so that + * the boot monitor can capture all the other cpus when one catches + * a watchdog reset or the user enters the monitor using L1-A keys. + */ +#define MBOX_STOPCPU 0xFB +#define MBOX_IDLECPU 0xFC +#define MBOX_IDLECPU2 0xFD +#define MBOX_STOPCPU2 0xFE + +#else /* SMP */ + +#define hard_smp_processor_id() 0 +#define smp_setup_cpu_possible_map() do { } while (0) + +#endif /* !(SMP) */ + +#define NO_PROC_ID 0xFF + +#endif /* !(_SPARC_SMP_H) */ diff --git a/arch/sparc/include/asm/smp_64.h b/arch/sparc/include/asm/smp_64.h new file mode 100644 index 00000000000..57224dd37b3 --- /dev/null +++ b/arch/sparc/include/asm/smp_64.h @@ -0,0 +1,67 @@ +/* smp.h: Sparc64 specific SMP stuff. + * + * Copyright (C) 1996, 2008 David S. Miller (davem@davemloft.net) + */ + +#ifndef _SPARC64_SMP_H +#define _SPARC64_SMP_H + +#include <linux/threads.h> +#include <asm/asi.h> +#include <asm/starfire.h> +#include <asm/spitfire.h> + +#ifndef __ASSEMBLY__ + +#include <linux/cpumask.h> +#include <linux/cache.h> + +#endif /* !(__ASSEMBLY__) */ + +#ifdef CONFIG_SMP + +#ifndef __ASSEMBLY__ + +/* + * Private routines/data + */ + +#include <linux/bitops.h> +#include <asm/atomic.h> +#include <asm/percpu.h> + +DECLARE_PER_CPU(cpumask_t, cpu_sibling_map); +extern cpumask_t cpu_core_map[NR_CPUS]; +extern int sparc64_multi_core; + +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi(cpumask_t mask); + +/* + * General functions that each host system must provide. + */ + +extern int hard_smp_processor_id(void); +#define raw_smp_processor_id() (current_thread_info()->cpu) + +extern void smp_fill_in_sib_core_maps(void); +extern void cpu_play_dead(void); + +extern void smp_fetch_global_regs(void); + +#ifdef CONFIG_HOTPLUG_CPU +extern int __cpu_disable(void); +extern void __cpu_die(unsigned int cpu); +#endif + +#endif /* !(__ASSEMBLY__) */ + +#else + +#define hard_smp_processor_id() 0 +#define smp_fill_in_sib_core_maps() do { } while (0) +#define smp_fetch_global_regs() do { } while (0) + +#endif /* !(CONFIG_SMP) */ + +#endif /* !(_SPARC64_SMP_H) */ diff --git a/arch/sparc/include/asm/smpprim.h b/arch/sparc/include/asm/smpprim.h new file mode 100644 index 00000000000..eb849d862c6 --- /dev/null +++ b/arch/sparc/include/asm/smpprim.h @@ -0,0 +1,54 @@ +/* + * smpprim.h: SMP locking primitives on the Sparc + * + * God knows we won't be actually using this code for some time + * but I thought I'd write it since I knew how. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef __SPARC_SMPPRIM_H +#define __SPARC_SMPPRIM_H + +/* Test and set the unsigned byte at ADDR to 1. Returns the previous + * value. On the Sparc we use the ldstub instruction since it is + * atomic. + */ + +static inline __volatile__ char test_and_set(void *addr) +{ + char state = 0; + + __asm__ __volatile__("ldstub [%0], %1 ! test_and_set\n\t" + "=r" (addr), "=r" (state) : + "0" (addr), "1" (state) : "memory"); + + return state; +} + +/* Initialize a spin-lock. */ +static inline __volatile__ smp_initlock(void *spinlock) +{ + /* Unset the lock. */ + *((unsigned char *) spinlock) = 0; + + return; +} + +/* This routine spins until it acquires the lock at ADDR. */ +static inline __volatile__ smp_lock(void *addr) +{ + while(test_and_set(addr) == 0xff) + ; + + /* We now have the lock */ + return; +} + +/* This routine releases the lock at ADDR. */ +static inline __volatile__ smp_unlock(void *addr) +{ + *((unsigned char *) addr) = 0; +} + +#endif /* !(__SPARC_SMPPRIM_H) */ diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h new file mode 100644 index 00000000000..bf50d0c2d58 --- /dev/null +++ b/arch/sparc/include/asm/socket.h @@ -0,0 +1,58 @@ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include <asm/sockios.h> + +/* For setsockopt(2) */ +#define SOL_SOCKET 0xffff + +#define SO_DEBUG 0x0001 +#define SO_PASSCRED 0x0002 +#define SO_REUSEADDR 0x0004 +#define SO_KEEPALIVE 0x0008 +#define SO_DONTROUTE 0x0010 +#define SO_BROADCAST 0x0020 +#define SO_PEERCRED 0x0040 +#define SO_LINGER 0x0080 +#define SO_OOBINLINE 0x0100 +/* To add :#define SO_REUSEPORT 0x0200 */ +#define SO_BSDCOMPAT 0x0400 +#define SO_RCVLOWAT 0x0800 +#define SO_SNDLOWAT 0x1000 +#define SO_RCVTIMEO 0x2000 +#define SO_SNDTIMEO 0x4000 +#define SO_ACCEPTCONN 0x8000 + +#define SO_SNDBUF 0x1001 +#define SO_RCVBUF 0x1002 +#define SO_SNDBUFFORCE 0x100a +#define SO_RCVBUFFORCE 0x100b +#define SO_ERROR 0x1007 +#define SO_TYPE 0x1008 + +/* Linux specific, keep the same. */ +#define SO_NO_CHECK 0x000b +#define SO_PRIORITY 0x000c + +#define SO_BINDTODEVICE 0x000d + +#define SO_ATTACH_FILTER 0x001a +#define SO_DETACH_FILTER 0x001b + +#define SO_PEERNAME 0x001c +#define SO_TIMESTAMP 0x001d +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_PEERSEC 0x001e +#define SO_PASSSEC 0x001f +#define SO_TIMESTAMPNS 0x0021 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 0x0022 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 0x5001 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 0x5002 +#define SO_SECURITY_ENCRYPTION_NETWORK 0x5004 + +#endif /* _ASM_SOCKET_H */ diff --git a/arch/sparc/include/asm/sockios.h b/arch/sparc/include/asm/sockios.h new file mode 100644 index 00000000000..990ea746486 --- /dev/null +++ b/arch/sparc/include/asm/sockios.h @@ -0,0 +1,14 @@ +#ifndef _ASM_SPARC_SOCKIOS_H +#define _ASM_SPARC_SOCKIOS_H + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* !(_ASM_SPARC_SOCKIOS_H) */ + diff --git a/arch/sparc/include/asm/sparsemem.h b/arch/sparc/include/asm/sparsemem.h new file mode 100644 index 00000000000..b99d4e4b6d2 --- /dev/null +++ b/arch/sparc/include/asm/sparsemem.h @@ -0,0 +1,12 @@ +#ifndef _SPARC64_SPARSEMEM_H +#define _SPARC64_SPARSEMEM_H + +#ifdef __KERNEL__ + +#define SECTION_SIZE_BITS 30 +#define MAX_PHYSADDR_BITS 42 +#define MAX_PHYSMEM_BITS 42 + +#endif /* !(__KERNEL__) */ + +#endif /* !(_SPARC64_SPARSEMEM_H) */ diff --git a/arch/sparc/include/asm/spinlock.h b/arch/sparc/include/asm/spinlock.h new file mode 100644 index 00000000000..f276b0036b2 --- /dev/null +++ b/arch/sparc/include/asm/spinlock.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_SPINLOCK_H +#define ___ASM_SPARC_SPINLOCK_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/spinlock_64.h> +#else +#include <asm/spinlock_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/spinlock_32.h b/arch/sparc/include/asm/spinlock_32.h new file mode 100644 index 00000000000..de2249b267c --- /dev/null +++ b/arch/sparc/include/asm/spinlock_32.h @@ -0,0 +1,192 @@ +/* spinlock.h: 32-bit Sparc spinlock support. + * + * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef __SPARC_SPINLOCK_H +#define __SPARC_SPINLOCK_H + +#include <linux/threads.h> /* For NR_CPUS */ + +#ifndef __ASSEMBLY__ + +#include <asm/psr.h> + +#define __raw_spin_is_locked(lock) (*((volatile unsigned char *)(lock)) != 0) + +#define __raw_spin_unlock_wait(lock) \ + do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0) + +static inline void __raw_spin_lock(raw_spinlock_t *lock) +{ + __asm__ __volatile__( + "\n1:\n\t" + "ldstub [%0], %%g2\n\t" + "orcc %%g2, 0x0, %%g0\n\t" + "bne,a 2f\n\t" + " ldub [%0], %%g2\n\t" + ".subsection 2\n" + "2:\n\t" + "orcc %%g2, 0x0, %%g0\n\t" + "bne,a 2b\n\t" + " ldub [%0], %%g2\n\t" + "b,a 1b\n\t" + ".previous\n" + : /* no outputs */ + : "r" (lock) + : "g2", "memory", "cc"); +} + +static inline int __raw_spin_trylock(raw_spinlock_t *lock) +{ + unsigned int result; + __asm__ __volatile__("ldstub [%1], %0" + : "=r" (result) + : "r" (lock) + : "memory"); + return (result == 0); +} + +static inline void __raw_spin_unlock(raw_spinlock_t *lock) +{ + __asm__ __volatile__("stb %%g0, [%0]" : : "r" (lock) : "memory"); +} + +/* Read-write spinlocks, allowing multiple readers + * but only one writer. + * + * NOTE! it is quite common to have readers in interrupts + * but no interrupt writers. For those circumstances we + * can "mix" irq-safe locks - any writer needs to get a + * irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + * + * XXX This might create some problems with my dual spinlock + * XXX scheme, deadlocks etc. -DaveM + * + * Sort of like atomic_t's on Sparc, but even more clever. + * + * ------------------------------------ + * | 24-bit counter | wlock | raw_rwlock_t + * ------------------------------------ + * 31 8 7 0 + * + * wlock signifies the one writer is in or somebody is updating + * counter. For a writer, if he successfully acquires the wlock, + * but counter is non-zero, he has to release the lock and wait, + * till both counter and wlock are zero. + * + * Unfortunately this scheme limits us to ~16,000,000 cpus. + */ +static inline void __read_lock(raw_rwlock_t *rw) +{ + register raw_rwlock_t *lp asm("g1"); + lp = rw; + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___rw_read_enter\n\t" + " ldstub [%%g1 + 3], %%g2\n" + : /* no outputs */ + : "r" (lp) + : "g2", "g4", "memory", "cc"); +} + +#define __raw_read_lock(lock) \ +do { unsigned long flags; \ + local_irq_save(flags); \ + __read_lock(lock); \ + local_irq_restore(flags); \ +} while(0) + +static inline void __read_unlock(raw_rwlock_t *rw) +{ + register raw_rwlock_t *lp asm("g1"); + lp = rw; + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___rw_read_exit\n\t" + " ldstub [%%g1 + 3], %%g2\n" + : /* no outputs */ + : "r" (lp) + : "g2", "g4", "memory", "cc"); +} + +#define __raw_read_unlock(lock) \ +do { unsigned long flags; \ + local_irq_save(flags); \ + __read_unlock(lock); \ + local_irq_restore(flags); \ +} while(0) + +static inline void __raw_write_lock(raw_rwlock_t *rw) +{ + register raw_rwlock_t *lp asm("g1"); + lp = rw; + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___rw_write_enter\n\t" + " ldstub [%%g1 + 3], %%g2\n" + : /* no outputs */ + : "r" (lp) + : "g2", "g4", "memory", "cc"); + *(volatile __u32 *)&lp->lock = ~0U; +} + +static inline int __raw_write_trylock(raw_rwlock_t *rw) +{ + unsigned int val; + + __asm__ __volatile__("ldstub [%1 + 3], %0" + : "=r" (val) + : "r" (&rw->lock) + : "memory"); + + if (val == 0) { + val = rw->lock & ~0xff; + if (val) + ((volatile u8*)&rw->lock)[3] = 0; + else + *(volatile u32*)&rw->lock = ~0U; + } + + return (val == 0); +} + +static inline int __read_trylock(raw_rwlock_t *rw) +{ + register raw_rwlock_t *lp asm("g1"); + register int res asm("o0"); + lp = rw; + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___rw_read_try\n\t" + " ldstub [%%g1 + 3], %%g2\n" + : "=r" (res) + : "r" (lp) + : "g2", "g4", "memory", "cc"); + return res; +} + +#define __raw_read_trylock(lock) \ +({ unsigned long flags; \ + int res; \ + local_irq_save(flags); \ + res = __read_trylock(lock); \ + local_irq_restore(flags); \ + res; \ +}) + +#define __raw_write_unlock(rw) do { (rw)->lock = 0; } while(0) + +#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#define __raw_read_can_lock(rw) (!((rw)->lock & 0xff)) +#define __raw_write_can_lock(rw) (!(rw)->lock) + +#endif /* !(__ASSEMBLY__) */ + +#endif /* __SPARC_SPINLOCK_H */ diff --git a/arch/sparc/include/asm/spinlock_64.h b/arch/sparc/include/asm/spinlock_64.h new file mode 100644 index 00000000000..0006fe9f8c7 --- /dev/null +++ b/arch/sparc/include/asm/spinlock_64.h @@ -0,0 +1,250 @@ +/* spinlock.h: 64-bit Sparc spinlock support. + * + * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef __SPARC64_SPINLOCK_H +#define __SPARC64_SPINLOCK_H + +#include <linux/threads.h> /* For NR_CPUS */ + +#ifndef __ASSEMBLY__ + +/* To get debugging spinlocks which detect and catch + * deadlock situations, set CONFIG_DEBUG_SPINLOCK + * and rebuild your kernel. + */ + +/* All of these locking primitives are expected to work properly + * even in an RMO memory model, which currently is what the kernel + * runs in. + * + * There is another issue. Because we play games to save cycles + * in the non-contention case, we need to be extra careful about + * branch targets into the "spinning" code. They live in their + * own section, but the newer V9 branches have a shorter range + * than the traditional 32-bit sparc branch variants. The rule + * is that the branches that go into and out of the spinner sections + * must be pre-V9 branches. + */ + +#define __raw_spin_is_locked(lp) ((lp)->lock != 0) + +#define __raw_spin_unlock_wait(lp) \ + do { rmb(); \ + } while((lp)->lock) + +static inline void __raw_spin_lock(raw_spinlock_t *lock) +{ + unsigned long tmp; + + __asm__ __volatile__( +"1: ldstub [%1], %0\n" +" membar #StoreLoad | #StoreStore\n" +" brnz,pn %0, 2f\n" +" nop\n" +" .subsection 2\n" +"2: ldub [%1], %0\n" +" membar #LoadLoad\n" +" brnz,pt %0, 2b\n" +" nop\n" +" ba,a,pt %%xcc, 1b\n" +" .previous" + : "=&r" (tmp) + : "r" (lock) + : "memory"); +} + +static inline int __raw_spin_trylock(raw_spinlock_t *lock) +{ + unsigned long result; + + __asm__ __volatile__( +" ldstub [%1], %0\n" +" membar #StoreLoad | #StoreStore" + : "=r" (result) + : "r" (lock) + : "memory"); + + return (result == 0UL); +} + +static inline void __raw_spin_unlock(raw_spinlock_t *lock) +{ + __asm__ __volatile__( +" membar #StoreStore | #LoadStore\n" +" stb %%g0, [%0]" + : /* No outputs */ + : "r" (lock) + : "memory"); +} + +static inline void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags) +{ + unsigned long tmp1, tmp2; + + __asm__ __volatile__( +"1: ldstub [%2], %0\n" +" membar #StoreLoad | #StoreStore\n" +" brnz,pn %0, 2f\n" +" nop\n" +" .subsection 2\n" +"2: rdpr %%pil, %1\n" +" wrpr %3, %%pil\n" +"3: ldub [%2], %0\n" +" membar #LoadLoad\n" +" brnz,pt %0, 3b\n" +" nop\n" +" ba,pt %%xcc, 1b\n" +" wrpr %1, %%pil\n" +" .previous" + : "=&r" (tmp1), "=&r" (tmp2) + : "r"(lock), "r"(flags) + : "memory"); +} + +/* Multi-reader locks, these are much saner than the 32-bit Sparc ones... */ + +static void inline __read_lock(raw_rwlock_t *lock) +{ + unsigned long tmp1, tmp2; + + __asm__ __volatile__ ( +"1: ldsw [%2], %0\n" +" brlz,pn %0, 2f\n" +"4: add %0, 1, %1\n" +" cas [%2], %0, %1\n" +" cmp %0, %1\n" +" membar #StoreLoad | #StoreStore\n" +" bne,pn %%icc, 1b\n" +" nop\n" +" .subsection 2\n" +"2: ldsw [%2], %0\n" +" membar #LoadLoad\n" +" brlz,pt %0, 2b\n" +" nop\n" +" ba,a,pt %%xcc, 4b\n" +" .previous" + : "=&r" (tmp1), "=&r" (tmp2) + : "r" (lock) + : "memory"); +} + +static int inline __read_trylock(raw_rwlock_t *lock) +{ + int tmp1, tmp2; + + __asm__ __volatile__ ( +"1: ldsw [%2], %0\n" +" brlz,a,pn %0, 2f\n" +" mov 0, %0\n" +" add %0, 1, %1\n" +" cas [%2], %0, %1\n" +" cmp %0, %1\n" +" membar #StoreLoad | #StoreStore\n" +" bne,pn %%icc, 1b\n" +" mov 1, %0\n" +"2:" + : "=&r" (tmp1), "=&r" (tmp2) + : "r" (lock) + : "memory"); + + return tmp1; +} + +static void inline __read_unlock(raw_rwlock_t *lock) +{ + unsigned long tmp1, tmp2; + + __asm__ __volatile__( +" membar #StoreLoad | #LoadLoad\n" +"1: lduw [%2], %0\n" +" sub %0, 1, %1\n" +" cas [%2], %0, %1\n" +" cmp %0, %1\n" +" bne,pn %%xcc, 1b\n" +" nop" + : "=&r" (tmp1), "=&r" (tmp2) + : "r" (lock) + : "memory"); +} + +static void inline __write_lock(raw_rwlock_t *lock) +{ + unsigned long mask, tmp1, tmp2; + + mask = 0x80000000UL; + + __asm__ __volatile__( +"1: lduw [%2], %0\n" +" brnz,pn %0, 2f\n" +"4: or %0, %3, %1\n" +" cas [%2], %0, %1\n" +" cmp %0, %1\n" +" membar #StoreLoad | #StoreStore\n" +" bne,pn %%icc, 1b\n" +" nop\n" +" .subsection 2\n" +"2: lduw [%2], %0\n" +" membar #LoadLoad\n" +" brnz,pt %0, 2b\n" +" nop\n" +" ba,a,pt %%xcc, 4b\n" +" .previous" + : "=&r" (tmp1), "=&r" (tmp2) + : "r" (lock), "r" (mask) + : "memory"); +} + +static void inline __write_unlock(raw_rwlock_t *lock) +{ + __asm__ __volatile__( +" membar #LoadStore | #StoreStore\n" +" stw %%g0, [%0]" + : /* no outputs */ + : "r" (lock) + : "memory"); +} + +static int inline __write_trylock(raw_rwlock_t *lock) +{ + unsigned long mask, tmp1, tmp2, result; + + mask = 0x80000000UL; + + __asm__ __volatile__( +" mov 0, %2\n" +"1: lduw [%3], %0\n" +" brnz,pn %0, 2f\n" +" or %0, %4, %1\n" +" cas [%3], %0, %1\n" +" cmp %0, %1\n" +" membar #StoreLoad | #StoreStore\n" +" bne,pn %%icc, 1b\n" +" nop\n" +" mov 1, %2\n" +"2:" + : "=&r" (tmp1), "=&r" (tmp2), "=&r" (result) + : "r" (lock), "r" (mask) + : "memory"); + + return result; +} + +#define __raw_read_lock(p) __read_lock(p) +#define __raw_read_trylock(p) __read_trylock(p) +#define __raw_read_unlock(p) __read_unlock(p) +#define __raw_write_lock(p) __write_lock(p) +#define __raw_write_unlock(p) __write_unlock(p) +#define __raw_write_trylock(p) __write_trylock(p) + +#define __raw_read_can_lock(rw) (!((rw)->lock & 0x80000000UL)) +#define __raw_write_can_lock(rw) (!(rw)->lock) + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(__SPARC64_SPINLOCK_H) */ diff --git a/arch/sparc/include/asm/spinlock_types.h b/arch/sparc/include/asm/spinlock_types.h new file mode 100644 index 00000000000..37cbe01c585 --- /dev/null +++ b/arch/sparc/include/asm/spinlock_types.h @@ -0,0 +1,20 @@ +#ifndef __SPARC_SPINLOCK_TYPES_H +#define __SPARC_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct { + volatile unsigned char lock; +} raw_spinlock_t; + +#define __RAW_SPIN_LOCK_UNLOCKED { 0 } + +typedef struct { + volatile unsigned int lock; +} raw_rwlock_t; + +#define __RAW_RW_LOCK_UNLOCKED { 0 } + +#endif diff --git a/arch/sparc/include/asm/spitfire.h b/arch/sparc/include/asm/spitfire.h new file mode 100644 index 00000000000..985ea7e3199 --- /dev/null +++ b/arch/sparc/include/asm/spitfire.h @@ -0,0 +1,342 @@ +/* spitfire.h: SpitFire/BlackBird/Cheetah inline MMU operations. + * + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) + */ + +#ifndef _SPARC64_SPITFIRE_H +#define _SPARC64_SPITFIRE_H + +#include <asm/asi.h> + +/* The following register addresses are accessible via ASI_DMMU + * and ASI_IMMU, that is there is a distinct and unique copy of + * each these registers for each TLB. + */ +#define TSB_TAG_TARGET 0x0000000000000000 /* All chips */ +#define TLB_SFSR 0x0000000000000018 /* All chips */ +#define TSB_REG 0x0000000000000028 /* All chips */ +#define TLB_TAG_ACCESS 0x0000000000000030 /* All chips */ +#define VIRT_WATCHPOINT 0x0000000000000038 /* All chips */ +#define PHYS_WATCHPOINT 0x0000000000000040 /* All chips */ +#define TSB_EXTENSION_P 0x0000000000000048 /* Ultra-III and later */ +#define TSB_EXTENSION_S 0x0000000000000050 /* Ultra-III and later, D-TLB only */ +#define TSB_EXTENSION_N 0x0000000000000058 /* Ultra-III and later */ +#define TLB_TAG_ACCESS_EXT 0x0000000000000060 /* Ultra-III+ and later */ + +/* These registers only exist as one entity, and are accessed + * via ASI_DMMU only. + */ +#define PRIMARY_CONTEXT 0x0000000000000008 +#define SECONDARY_CONTEXT 0x0000000000000010 +#define DMMU_SFAR 0x0000000000000020 +#define VIRT_WATCHPOINT 0x0000000000000038 +#define PHYS_WATCHPOINT 0x0000000000000040 + +#define SPITFIRE_HIGHEST_LOCKED_TLBENT (64 - 1) +#define CHEETAH_HIGHEST_LOCKED_TLBENT (16 - 1) + +#define L1DCACHE_SIZE 0x4000 + +#define SUN4V_CHIP_INVALID 0x00 +#define SUN4V_CHIP_NIAGARA1 0x01 +#define SUN4V_CHIP_NIAGARA2 0x02 +#define SUN4V_CHIP_UNKNOWN 0xff + +#ifndef __ASSEMBLY__ + +enum ultra_tlb_layout { + spitfire = 0, + cheetah = 1, + cheetah_plus = 2, + hypervisor = 3, +}; + +extern enum ultra_tlb_layout tlb_type; + +extern int sun4v_chip_type; + +extern int cheetah_pcache_forced_on; +extern void cheetah_enable_pcache(void); + +#define sparc64_highest_locked_tlbent() \ + (tlb_type == spitfire ? \ + SPITFIRE_HIGHEST_LOCKED_TLBENT : \ + CHEETAH_HIGHEST_LOCKED_TLBENT) + +extern int num_kernel_image_mappings; + +/* The data cache is write through, so this just invalidates the + * specified line. + */ +static inline void spitfire_put_dcache_tag(unsigned long addr, unsigned long tag) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (tag), "r" (addr), "i" (ASI_DCACHE_TAG)); +} + +/* The instruction cache lines are flushed with this, but note that + * this does not flush the pipeline. It is possible for a line to + * get flushed but stale instructions to still be in the pipeline, + * a flush instruction (to any address) is sufficient to handle + * this issue after the line is invalidated. + */ +static inline void spitfire_put_icache_tag(unsigned long addr, unsigned long tag) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (tag), "r" (addr), "i" (ASI_IC_TAG)); +} + +static inline unsigned long spitfire_get_dtlb_data(int entry) +{ + unsigned long data; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=r" (data) + : "r" (entry << 3), "i" (ASI_DTLB_DATA_ACCESS)); + + /* Clear TTE diag bits. */ + data &= ~0x0003fe0000000000UL; + + return data; +} + +static inline unsigned long spitfire_get_dtlb_tag(int entry) +{ + unsigned long tag; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=r" (tag) + : "r" (entry << 3), "i" (ASI_DTLB_TAG_READ)); + return tag; +} + +static inline void spitfire_put_dtlb_data(int entry, unsigned long data) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (data), "r" (entry << 3), + "i" (ASI_DTLB_DATA_ACCESS)); +} + +static inline unsigned long spitfire_get_itlb_data(int entry) +{ + unsigned long data; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=r" (data) + : "r" (entry << 3), "i" (ASI_ITLB_DATA_ACCESS)); + + /* Clear TTE diag bits. */ + data &= ~0x0003fe0000000000UL; + + return data; +} + +static inline unsigned long spitfire_get_itlb_tag(int entry) +{ + unsigned long tag; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=r" (tag) + : "r" (entry << 3), "i" (ASI_ITLB_TAG_READ)); + return tag; +} + +static inline void spitfire_put_itlb_data(int entry, unsigned long data) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (data), "r" (entry << 3), + "i" (ASI_ITLB_DATA_ACCESS)); +} + +static inline void spitfire_flush_dtlb_nucleus_page(unsigned long page) +{ + __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (page | 0x20), "i" (ASI_DMMU_DEMAP)); +} + +static inline void spitfire_flush_itlb_nucleus_page(unsigned long page) +{ + __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (page | 0x20), "i" (ASI_IMMU_DEMAP)); +} + +/* Cheetah has "all non-locked" tlb flushes. */ +static inline void cheetah_flush_dtlb_all(void) +{ + __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (0x80), "i" (ASI_DMMU_DEMAP)); +} + +static inline void cheetah_flush_itlb_all(void) +{ + __asm__ __volatile__("stxa %%g0, [%0] %1\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (0x80), "i" (ASI_IMMU_DEMAP)); +} + +/* Cheetah has a 4-tlb layout so direct access is a bit different. + * The first two TLBs are fully assosciative, hold 16 entries, and are + * used only for locked and >8K sized translations. One exists for + * data accesses and one for instruction accesses. + * + * The third TLB is for data accesses to 8K non-locked translations, is + * 2 way assosciative, and holds 512 entries. The fourth TLB is for + * instruction accesses to 8K non-locked translations, is 2 way + * assosciative, and holds 128 entries. + * + * Cheetah has some bug where bogus data can be returned from + * ASI_{D,I}TLB_DATA_ACCESS loads, doing the load twice fixes + * the problem for me. -DaveM + */ +static inline unsigned long cheetah_get_ldtlb_data(int entry) +{ + unsigned long data; + + __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t" + "ldxa [%1] %2, %0" + : "=r" (data) + : "r" ((0 << 16) | (entry << 3)), + "i" (ASI_DTLB_DATA_ACCESS)); + + return data; +} + +static inline unsigned long cheetah_get_litlb_data(int entry) +{ + unsigned long data; + + __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t" + "ldxa [%1] %2, %0" + : "=r" (data) + : "r" ((0 << 16) | (entry << 3)), + "i" (ASI_ITLB_DATA_ACCESS)); + + return data; +} + +static inline unsigned long cheetah_get_ldtlb_tag(int entry) +{ + unsigned long tag; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=r" (tag) + : "r" ((0 << 16) | (entry << 3)), + "i" (ASI_DTLB_TAG_READ)); + + return tag; +} + +static inline unsigned long cheetah_get_litlb_tag(int entry) +{ + unsigned long tag; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=r" (tag) + : "r" ((0 << 16) | (entry << 3)), + "i" (ASI_ITLB_TAG_READ)); + + return tag; +} + +static inline void cheetah_put_ldtlb_data(int entry, unsigned long data) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (data), + "r" ((0 << 16) | (entry << 3)), + "i" (ASI_DTLB_DATA_ACCESS)); +} + +static inline void cheetah_put_litlb_data(int entry, unsigned long data) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (data), + "r" ((0 << 16) | (entry << 3)), + "i" (ASI_ITLB_DATA_ACCESS)); +} + +static inline unsigned long cheetah_get_dtlb_data(int entry, int tlb) +{ + unsigned long data; + + __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t" + "ldxa [%1] %2, %0" + : "=r" (data) + : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_DATA_ACCESS)); + + return data; +} + +static inline unsigned long cheetah_get_dtlb_tag(int entry, int tlb) +{ + unsigned long tag; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=r" (tag) + : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_TAG_READ)); + return tag; +} + +static inline void cheetah_put_dtlb_data(int entry, unsigned long data, int tlb) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (data), + "r" ((tlb << 16) | (entry << 3)), + "i" (ASI_DTLB_DATA_ACCESS)); +} + +static inline unsigned long cheetah_get_itlb_data(int entry) +{ + unsigned long data; + + __asm__ __volatile__("ldxa [%1] %2, %%g0\n\t" + "ldxa [%1] %2, %0" + : "=r" (data) + : "r" ((2 << 16) | (entry << 3)), + "i" (ASI_ITLB_DATA_ACCESS)); + + return data; +} + +static inline unsigned long cheetah_get_itlb_tag(int entry) +{ + unsigned long tag; + + __asm__ __volatile__("ldxa [%1] %2, %0" + : "=r" (tag) + : "r" ((2 << 16) | (entry << 3)), "i" (ASI_ITLB_TAG_READ)); + return tag; +} + +static inline void cheetah_put_itlb_data(int entry, unsigned long data) +{ + __asm__ __volatile__("stxa %0, [%1] %2\n\t" + "membar #Sync" + : /* No outputs */ + : "r" (data), "r" ((2 << 16) | (entry << 3)), + "i" (ASI_ITLB_DATA_ACCESS)); +} + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(_SPARC64_SPITFIRE_H) */ diff --git a/arch/sparc/include/asm/sstate.h b/arch/sparc/include/asm/sstate.h new file mode 100644 index 00000000000..a7c35dbcb28 --- /dev/null +++ b/arch/sparc/include/asm/sstate.h @@ -0,0 +1,13 @@ +#ifndef _SPARC64_SSTATE_H +#define _SPARC64_SSTATE_H + +extern void sstate_booting(void); +extern void sstate_running(void); +extern void sstate_halt(void); +extern void sstate_poweroff(void); +extern void sstate_panic(void); +extern void sstate_reboot(void); + +extern void sun4v_sstate_init(void); + +#endif /* _SPARC64_SSTATE_H */ diff --git a/arch/sparc/include/asm/stacktrace.h b/arch/sparc/include/asm/stacktrace.h new file mode 100644 index 00000000000..6cee39adf6d --- /dev/null +++ b/arch/sparc/include/asm/stacktrace.h @@ -0,0 +1,6 @@ +#ifndef _SPARC64_STACKTRACE_H +#define _SPARC64_STACKTRACE_H + +extern void stack_trace_flush(void); + +#endif /* _SPARC64_STACKTRACE_H */ diff --git a/arch/sparc/include/asm/starfire.h b/arch/sparc/include/asm/starfire.h new file mode 100644 index 00000000000..07bafd31e33 --- /dev/null +++ b/arch/sparc/include/asm/starfire.h @@ -0,0 +1,21 @@ +/* + * starfire.h: Group all starfire specific code together. + * + * Copyright (C) 2000 Anton Blanchard (anton@samba.org) + */ + +#ifndef _SPARC64_STARFIRE_H +#define _SPARC64_STARFIRE_H + +#ifndef __ASSEMBLY__ + +extern int this_is_starfire; + +extern void check_if_starfire(void); +extern void starfire_cpu_setup(void); +extern int starfire_hard_smp_processor_id(void); +extern void starfire_hookup(int); +extern unsigned int starfire_translate(unsigned long imap, unsigned int upaid); + +#endif +#endif diff --git a/arch/sparc/include/asm/stat.h b/arch/sparc/include/asm/stat.h new file mode 100644 index 00000000000..d8153013df7 --- /dev/null +++ b/arch/sparc/include/asm/stat.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_STAT_H +#define ___ASM_SPARC_STAT_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/stat_64.h> +#else +#include <asm/stat_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/stat_32.h b/arch/sparc/include/asm/stat_32.h new file mode 100644 index 00000000000..2299e1d5d94 --- /dev/null +++ b/arch/sparc/include/asm/stat_32.h @@ -0,0 +1,76 @@ +#ifndef _SPARC_STAT_H +#define _SPARC_STAT_H + +#include <linux/types.h> + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +struct stat { + unsigned short st_dev; + unsigned long st_ino; + unsigned short st_mode; + short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + long st_size; + long st_atime; + unsigned long st_atime_nsec; + long st_mtime; + unsigned long st_mtime_nsec; + long st_ctime; + unsigned long st_ctime_nsec; + long st_blksize; + long st_blocks; + unsigned long __unused4[2]; +}; + +#define STAT_HAVE_NSEC 1 + +struct stat64 { + unsigned long long st_dev; + + unsigned long long st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned int st_uid; + unsigned int st_gid; + + unsigned long long st_rdev; + + unsigned char __pad3[8]; + + long long st_size; + unsigned int st_blksize; + + unsigned char __pad4[8]; + unsigned int st_blocks; + + unsigned int st_atime; + unsigned int st_atime_nsec; + + unsigned int st_mtime; + unsigned int st_mtime_nsec; + + unsigned int st_ctime; + unsigned int st_ctime_nsec; + + unsigned int __unused4; + unsigned int __unused5; +}; + +#endif diff --git a/arch/sparc/include/asm/stat_64.h b/arch/sparc/include/asm/stat_64.h new file mode 100644 index 00000000000..9650fdea847 --- /dev/null +++ b/arch/sparc/include/asm/stat_64.h @@ -0,0 +1,47 @@ +#ifndef _SPARC64_STAT_H +#define _SPARC64_STAT_H + +#include <linux/types.h> + +struct stat { + unsigned st_dev; + ino_t st_ino; + mode_t st_mode; + short st_nlink; + uid_t st_uid; + gid_t st_gid; + unsigned st_rdev; + off_t st_size; + time_t st_atime; + time_t st_mtime; + time_t st_ctime; + off_t st_blksize; + off_t st_blocks; + unsigned long __unused4[2]; +}; + +struct stat64 { + unsigned long st_dev; + unsigned long st_ino; + unsigned long st_nlink; + + unsigned int st_mode; + unsigned int st_uid; + unsigned int st_gid; + unsigned int __pad0; + + unsigned long st_rdev; + long st_size; + long st_blksize; + long st_blocks; + + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + long __unused[3]; +}; + +#endif diff --git a/arch/sparc/include/asm/statfs.h b/arch/sparc/include/asm/statfs.h new file mode 100644 index 00000000000..5e937a73743 --- /dev/null +++ b/arch/sparc/include/asm/statfs.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_STATFS_H +#define ___ASM_SPARC_STATFS_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/statfs_64.h> +#else +#include <asm/statfs_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/statfs_32.h b/arch/sparc/include/asm/statfs_32.h new file mode 100644 index 00000000000..304520fa886 --- /dev/null +++ b/arch/sparc/include/asm/statfs_32.h @@ -0,0 +1,6 @@ +#ifndef _SPARC_STATFS_H +#define _SPARC_STATFS_H + +#include <asm-generic/statfs.h> + +#endif diff --git a/arch/sparc/include/asm/statfs_64.h b/arch/sparc/include/asm/statfs_64.h new file mode 100644 index 00000000000..79b3c890a5f --- /dev/null +++ b/arch/sparc/include/asm/statfs_64.h @@ -0,0 +1,54 @@ +#ifndef _SPARC64_STATFS_H +#define _SPARC64_STATFS_H + +#ifndef __KERNEL_STRICT_NAMES + +#include <linux/types.h> + +typedef __kernel_fsid_t fsid_t; + +#endif + +struct statfs { + long f_type; + long f_bsize; + long f_blocks; + long f_bfree; + long f_bavail; + long f_files; + long f_ffree; + __kernel_fsid_t f_fsid; + long f_namelen; + long f_frsize; + long f_spare[5]; +}; + +struct statfs64 { + long f_type; + long f_bsize; + long f_blocks; + long f_bfree; + long f_bavail; + long f_files; + long f_ffree; + __kernel_fsid_t f_fsid; + long f_namelen; + long f_frsize; + long f_spare[5]; +}; + +struct compat_statfs64 { + __u32 f_type; + __u32 f_bsize; + __u64 f_blocks; + __u64 f_bfree; + __u64 f_bavail; + __u64 f_files; + __u64 f_ffree; + __kernel_fsid_t f_fsid; + __u32 f_namelen; + __u32 f_frsize; + __u32 f_spare[5]; +}; + +#endif diff --git a/arch/sparc/include/asm/string.h b/arch/sparc/include/asm/string.h new file mode 100644 index 00000000000..98b72a0c8e6 --- /dev/null +++ b/arch/sparc/include/asm/string.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_STRING_H +#define ___ASM_SPARC_STRING_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/string_64.h> +#else +#include <asm/string_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/string_32.h b/arch/sparc/include/asm/string_32.h new file mode 100644 index 00000000000..6c5fddb7e6b --- /dev/null +++ b/arch/sparc/include/asm/string_32.h @@ -0,0 +1,205 @@ +/* + * string.h: External definitions for optimized assembly string + * routines for the Linux Kernel. + * + * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ + +#ifndef __SPARC_STRING_H__ +#define __SPARC_STRING_H__ + +#include <asm/page.h> + +/* Really, userland/ksyms should not see any of this stuff. */ + +#ifdef __KERNEL__ + +extern void __memmove(void *,const void *,__kernel_size_t); +extern __kernel_size_t __memcpy(void *,const void *,__kernel_size_t); +extern __kernel_size_t __memset(void *,int,__kernel_size_t); + +#ifndef EXPORT_SYMTAB_STROPS + +/* First the mem*() things. */ +#define __HAVE_ARCH_MEMMOVE +#undef memmove +#define memmove(_to, _from, _n) \ +({ \ + void *_t = (_to); \ + __memmove(_t, (_from), (_n)); \ + _t; \ +}) + +#define __HAVE_ARCH_MEMCPY + +static inline void *__constant_memcpy(void *to, const void *from, __kernel_size_t n) +{ + extern void __copy_1page(void *, const void *); + + if(n <= 32) { + __builtin_memcpy(to, from, n); + } else if (((unsigned int) to & 7) != 0) { + /* Destination is not aligned on the double-word boundary */ + __memcpy(to, from, n); + } else { + switch(n) { + case PAGE_SIZE: + __copy_1page(to, from); + break; + default: + __memcpy(to, from, n); + break; + } + } + return to; +} + +static inline void *__nonconstant_memcpy(void *to, const void *from, __kernel_size_t n) +{ + __memcpy(to, from, n); + return to; +} + +#undef memcpy +#define memcpy(t, f, n) \ +(__builtin_constant_p(n) ? \ + __constant_memcpy((t),(f),(n)) : \ + __nonconstant_memcpy((t),(f),(n))) + +#define __HAVE_ARCH_MEMSET + +static inline void *__constant_c_and_count_memset(void *s, char c, __kernel_size_t count) +{ + extern void bzero_1page(void *); + extern __kernel_size_t __bzero(void *, __kernel_size_t); + + if(!c) { + if(count == PAGE_SIZE) + bzero_1page(s); + else + __bzero(s, count); + } else { + __memset(s, c, count); + } + return s; +} + +static inline void *__constant_c_memset(void *s, char c, __kernel_size_t count) +{ + extern __kernel_size_t __bzero(void *, __kernel_size_t); + + if(!c) + __bzero(s, count); + else + __memset(s, c, count); + return s; +} + +static inline void *__nonconstant_memset(void *s, char c, __kernel_size_t count) +{ + __memset(s, c, count); + return s; +} + +#undef memset +#define memset(s, c, count) \ +(__builtin_constant_p(c) ? (__builtin_constant_p(count) ? \ + __constant_c_and_count_memset((s), (c), (count)) : \ + __constant_c_memset((s), (c), (count))) \ + : __nonconstant_memset((s), (c), (count))) + +#define __HAVE_ARCH_MEMSCAN + +#undef memscan +#define memscan(__arg0, __char, __arg2) \ +({ \ + extern void *__memscan_zero(void *, size_t); \ + extern void *__memscan_generic(void *, int, size_t); \ + void *__retval, *__addr = (__arg0); \ + size_t __size = (__arg2); \ + \ + if(__builtin_constant_p(__char) && !(__char)) \ + __retval = __memscan_zero(__addr, __size); \ + else \ + __retval = __memscan_generic(__addr, (__char), __size); \ + \ + __retval; \ +}) + +#define __HAVE_ARCH_MEMCMP +extern int memcmp(const void *,const void *,__kernel_size_t); + +/* Now the str*() stuff... */ +#define __HAVE_ARCH_STRLEN +extern __kernel_size_t strlen(const char *); + +#define __HAVE_ARCH_STRNCMP + +extern int __strncmp(const char *, const char *, __kernel_size_t); + +static inline int __constant_strncmp(const char *src, const char *dest, __kernel_size_t count) +{ + register int retval; + switch(count) { + case 0: return 0; + case 1: return (src[0] - dest[0]); + case 2: retval = (src[0] - dest[0]); + if(!retval && src[0]) + retval = (src[1] - dest[1]); + return retval; + case 3: retval = (src[0] - dest[0]); + if(!retval && src[0]) { + retval = (src[1] - dest[1]); + if(!retval && src[1]) + retval = (src[2] - dest[2]); + } + return retval; + case 4: retval = (src[0] - dest[0]); + if(!retval && src[0]) { + retval = (src[1] - dest[1]); + if(!retval && src[1]) { + retval = (src[2] - dest[2]); + if (!retval && src[2]) + retval = (src[3] - dest[3]); + } + } + return retval; + case 5: retval = (src[0] - dest[0]); + if(!retval && src[0]) { + retval = (src[1] - dest[1]); + if(!retval && src[1]) { + retval = (src[2] - dest[2]); + if (!retval && src[2]) { + retval = (src[3] - dest[3]); + if (!retval && src[3]) + retval = (src[4] - dest[4]); + } + } + } + return retval; + default: + retval = (src[0] - dest[0]); + if(!retval && src[0]) { + retval = (src[1] - dest[1]); + if(!retval && src[1]) { + retval = (src[2] - dest[2]); + if(!retval && src[2]) + retval = __strncmp(src+3,dest+3,count-3); + } + } + return retval; + } +} + +#undef strncmp +#define strncmp(__arg0, __arg1, __arg2) \ +(__builtin_constant_p(__arg2) ? \ + __constant_strncmp(__arg0, __arg1, __arg2) : \ + __strncmp(__arg0, __arg1, __arg2)) + +#endif /* !EXPORT_SYMTAB_STROPS */ + +#endif /* __KERNEL__ */ + +#endif /* !(__SPARC_STRING_H__) */ diff --git a/arch/sparc/include/asm/string_64.h b/arch/sparc/include/asm/string_64.h new file mode 100644 index 00000000000..43161f2d17e --- /dev/null +++ b/arch/sparc/include/asm/string_64.h @@ -0,0 +1,83 @@ +/* + * string.h: External definitions for optimized assembly string + * routines for the Linux Kernel. + * + * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1996,1997,1999 Jakub Jelinek (jakub@redhat.com) + */ + +#ifndef __SPARC64_STRING_H__ +#define __SPARC64_STRING_H__ + +/* Really, userland/ksyms should not see any of this stuff. */ + +#ifdef __KERNEL__ + +#include <asm/asi.h> + +extern void *__memset(void *,int,__kernel_size_t); + +#ifndef EXPORT_SYMTAB_STROPS + +/* First the mem*() things. */ +#define __HAVE_ARCH_MEMMOVE +extern void *memmove(void *, const void *, __kernel_size_t); + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *, const void *, __kernel_size_t); + +#define __HAVE_ARCH_MEMSET +extern void *__builtin_memset(void *,int,__kernel_size_t); + +static inline void *__constant_memset(void *s, int c, __kernel_size_t count) +{ + extern __kernel_size_t __bzero(void *, __kernel_size_t); + + if (!c) { + __bzero(s, count); + return s; + } else + return __memset(s, c, count); +} + +#undef memset +#define memset(s, c, count) \ +((__builtin_constant_p(count) && (count) <= 32) ? \ + __builtin_memset((s), (c), (count)) : \ + (__builtin_constant_p(c) ? \ + __constant_memset((s), (c), (count)) : \ + __memset((s), (c), (count)))) + +#define __HAVE_ARCH_MEMSCAN + +#undef memscan +#define memscan(__arg0, __char, __arg2) \ +({ \ + extern void *__memscan_zero(void *, size_t); \ + extern void *__memscan_generic(void *, int, size_t); \ + void *__retval, *__addr = (__arg0); \ + size_t __size = (__arg2); \ + \ + if(__builtin_constant_p(__char) && !(__char)) \ + __retval = __memscan_zero(__addr, __size); \ + else \ + __retval = __memscan_generic(__addr, (__char), __size); \ + \ + __retval; \ +}) + +#define __HAVE_ARCH_MEMCMP +extern int memcmp(const void *,const void *,__kernel_size_t); + +/* Now the str*() stuff... */ +#define __HAVE_ARCH_STRLEN +extern __kernel_size_t strlen(const char *); + +#define __HAVE_ARCH_STRNCMP +extern int strncmp(const char *, const char *, __kernel_size_t); + +#endif /* !EXPORT_SYMTAB_STROPS */ + +#endif /* __KERNEL__ */ + +#endif /* !(__SPARC64_STRING_H__) */ diff --git a/arch/sparc/include/asm/sun4paddr.h b/arch/sparc/include/asm/sun4paddr.h new file mode 100644 index 00000000000..d52985f19f4 --- /dev/null +++ b/arch/sparc/include/asm/sun4paddr.h @@ -0,0 +1,56 @@ +/* + * sun4paddr.h: Various physical addresses on sun4 machines + * + * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au) + * Copyright (C) 1998 Chris Davis (cdavis@cois.on.ca) + * + * Now supports more sun4's + */ + +#ifndef _SPARC_SUN4PADDR_H +#define _SPARC_SUN4PADDR_H + +#define SUN4_IE_PHYSADDR 0xf5000000 +#define SUN4_UNUSED_PHYSADDR 0 + +/* these work for me */ +#define SUN4_200_MEMREG_PHYSADDR 0xf4000000 +#define SUN4_200_CLOCK_PHYSADDR 0xf3000000 +#define SUN4_200_BWTWO_PHYSADDR 0xfd000000 +#define SUN4_200_ETH_PHYSADDR 0xf6000000 +#define SUN4_200_SI_PHYSADDR 0xff200000 + +/* these were here before */ +#define SUN4_300_MEMREG_PHYSADDR 0xf4000000 +#define SUN4_300_CLOCK_PHYSADDR 0xf2000000 +#define SUN4_300_TIMER_PHYSADDR 0xef000000 +#define SUN4_300_ETH_PHYSADDR 0xf9000000 +#define SUN4_300_BWTWO_PHYSADDR 0xfb400000 +#define SUN4_300_DMA_PHYSADDR 0xfa001000 +#define SUN4_300_ESP_PHYSADDR 0xfa000000 + +/* Are these right? */ +#define SUN4_400_MEMREG_PHYSADDR 0xf4000000 +#define SUN4_400_CLOCK_PHYSADDR 0xf2000000 +#define SUN4_400_TIMER_PHYSADDR 0xef000000 +#define SUN4_400_ETH_PHYSADDR 0xf9000000 +#define SUN4_400_BWTWO_PHYSADDR 0xfb400000 +#define SUN4_400_DMA_PHYSADDR 0xfa001000 +#define SUN4_400_ESP_PHYSADDR 0xfa000000 + +/* + these are the actual values set and used in the code. Unused items set + to SUN_UNUSED_PHYSADDR + */ + +extern int sun4_memreg_physaddr; /* memory register (ecc?) */ +extern int sun4_clock_physaddr; /* system clock */ +extern int sun4_timer_physaddr; /* timer, where applicable */ +extern int sun4_eth_physaddr; /* onboard ethernet (ie/le) */ +extern int sun4_si_physaddr; /* sun3 scsi adapter */ +extern int sun4_bwtwo_physaddr; /* onboard bw2 */ +extern int sun4_dma_physaddr; /* scsi dma */ +extern int sun4_esp_physaddr; /* esp scsi */ +extern int sun4_ie_physaddr; /* interrupt enable */ + +#endif /* !(_SPARC_SUN4PADDR_H) */ diff --git a/arch/sparc/include/asm/sun4prom.h b/arch/sparc/include/asm/sun4prom.h new file mode 100644 index 00000000000..9c8b4cbf629 --- /dev/null +++ b/arch/sparc/include/asm/sun4prom.h @@ -0,0 +1,83 @@ +/* + * sun4prom.h -- interface to sun4 PROM monitor. We don't use most of this, + * so most of these are just placeholders. + */ + +#ifndef _SUN4PROM_H_ +#define _SUN4PROM_H_ + +/* + * Although this looks similar to an romvec for a OpenProm machine, it is + * actually closer to what was used in the Sun2 and Sun3. + * + * V2 entries exist only in version 2 PROMs and later, V3 in version 3 and later. + * + * Many of the function prototypes are guesses. Some are certainly wrong. + * Use with care. + */ + +typedef struct { + char *initSP; /* Initial system stack ptr */ + void (*startmon)(void); /* Initial PC for hardware */ + int *diagberr; /* Bus err handler for diags */ + struct linux_arguments_v0 **bootParam; /* Info for bootstrapped pgm */ + unsigned int *memorysize; /* Usable memory in bytes */ + unsigned char (*getchar)(void); /* Get char from input device */ + void (*putchar)(char); /* Put char to output device */ + int (*mayget)(void); /* Maybe get char, or -1 */ + int (*mayput)(int); /* Maybe put char, or -1 */ + unsigned char *echo; /* Should getchar echo? */ + unsigned char *insource; /* Input source selector */ + unsigned char *outsink; /* Output sink selector */ + int (*getkey)(void); /* Get next key if one exists */ + void (*initgetkey)(void); /* Initialize get key */ + unsigned int *translation; /* Kbd translation selector */ + unsigned char *keybid; /* Keyboard ID byte */ + int *screen_x; /* V2: Screen x pos (r/o) */ + int *screen_y; /* V2: Screen y pos (r/o) */ + struct keybuf *keybuf; /* Up/down keycode buffer */ + char *monid; /* Monitor version ID */ + void (*fbwritechar)(char); /* Write a character to FB */ + int *fbAddr; /* Address of frame buffer */ + char **font; /* Font table for FB */ + void (*fbwritestr)(char *); /* Write string to FB */ + void (*reboot)(char *); /* e.g. reboot("sd()vmlinux") */ + unsigned char *linebuf; /* The line input buffer */ + unsigned char **lineptr; /* Cur pointer into linebuf */ + int *linesize; /* length of line in linebuf */ + void (*getline)(char *); /* Get line from user */ + unsigned char (*getnextchar)(void); /* Get next char from linebuf */ + unsigned char (*peeknextchar)(void); /* Peek at next char */ + int *fbthere; /* =1 if frame buffer there */ + int (*getnum)(void); /* Grab hex num from line */ + int (*printf)(char *, ...); /* See prom_printf() instead */ + void (*printhex)(int); /* Format N digits in hex */ + unsigned char *leds; /* RAM copy of LED register */ + void (*setLEDs)(unsigned char *); /* Sets LED's and RAM copy */ + void (*NMIaddr)(void *); /* Addr for level 7 vector */ + void (*abortentry)(void); /* Entry for keyboard abort */ + int *nmiclock; /* Counts up in msec */ + int *FBtype; /* Frame buffer type */ + unsigned int romvecversion; /* Version number for this romvec */ + struct globram *globram; /* monitor global variables ??? */ + void * kbdaddr; /* Addr of keyboard in use */ + int *keyrinit; /* ms before kbd repeat */ + unsigned char *keyrtick; /* ms between repetitions */ + unsigned int *memoryavail; /* V1: Main mem usable size */ + long *resetaddr; /* where to jump on a reset */ + long *resetmap; /* pgmap entry for resetaddr */ + void (*exittomon)(void); /* Exit from user program */ + unsigned char **memorybitmap; /* V1: &{0 or &bits} */ + void (*setcxsegmap)(int ctxt, char *va, int pmeg); /* Set seg in any context */ + void (**vector_cmd)(void *); /* V2: Handler for 'v' cmd */ + unsigned long *expectedtrapsig; /* V3: Location of the expected trap signal */ + unsigned long *trapvectorbasetable; /* V3: Address of the trap vector table */ + int unused1; + int unused2; + int unused3; + int unused4; +} linux_sun4_romvec; + +extern linux_sun4_romvec *sun4_romvec; + +#endif /* _SUN4PROM_H_ */ diff --git a/arch/sparc/include/asm/sunbpp.h b/arch/sparc/include/asm/sunbpp.h new file mode 100644 index 00000000000..d81a02eaf78 --- /dev/null +++ b/arch/sparc/include/asm/sunbpp.h @@ -0,0 +1,80 @@ +/* + * include/asm/sunbpp.h + */ + +#ifndef _ASM_SPARC_SUNBPP_H +#define _ASM_SPARC_SUNBPP_H + +struct bpp_regs { + /* DMA registers */ + __volatile__ __u32 p_csr; /* DMA Control/Status Register */ + __volatile__ __u32 p_addr; /* Address Register */ + __volatile__ __u32 p_bcnt; /* Byte Count Register */ + __volatile__ __u32 p_tst_csr; /* Test Control/Status (DMA2 only) */ + /* Parallel Port registers */ + __volatile__ __u16 p_hcr; /* Hardware Configuration Register */ + __volatile__ __u16 p_ocr; /* Operation Configuration Register */ + __volatile__ __u8 p_dr; /* Parallel Data Register */ + __volatile__ __u8 p_tcr; /* Transfer Control Register */ + __volatile__ __u8 p_or; /* Output Register */ + __volatile__ __u8 p_ir; /* Input Register */ + __volatile__ __u16 p_icr; /* Interrupt Control Register */ +}; + +/* P_HCR. Time is in increments of SBus clock. */ +#define P_HCR_TEST 0x8000 /* Allows buried counters to be read */ +#define P_HCR_DSW 0x7f00 /* Data strobe width (in ticks) */ +#define P_HCR_DDS 0x007f /* Data setup before strobe (in ticks) */ + +/* P_OCR. */ +#define P_OCR_MEM_CLR 0x8000 +#define P_OCR_DATA_SRC 0x4000 /* ) */ +#define P_OCR_DS_DSEL 0x2000 /* ) Bidirectional */ +#define P_OCR_BUSY_DSEL 0x1000 /* ) selects */ +#define P_OCR_ACK_DSEL 0x0800 /* ) */ +#define P_OCR_EN_DIAG 0x0400 +#define P_OCR_BUSY_OP 0x0200 /* Busy operation */ +#define P_OCR_ACK_OP 0x0100 /* Ack operation */ +#define P_OCR_SRST 0x0080 /* Reset state machines. Not selfcleaning. */ +#define P_OCR_IDLE 0x0008 /* PP data transfer state machine is idle */ +#define P_OCR_V_ILCK 0x0002 /* Versatec faded. Zebra only. */ +#define P_OCR_EN_VER 0x0001 /* Enable Versatec (0 - enable). Zebra only. */ + +/* P_TCR */ +#define P_TCR_DIR 0x08 +#define P_TCR_BUSY 0x04 +#define P_TCR_ACK 0x02 +#define P_TCR_DS 0x01 /* Strobe */ + +/* P_OR */ +#define P_OR_V3 0x20 /* ) */ +#define P_OR_V2 0x10 /* ) on Zebra only */ +#define P_OR_V1 0x08 /* ) */ +#define P_OR_INIT 0x04 +#define P_OR_AFXN 0x02 /* Auto Feed */ +#define P_OR_SLCT_IN 0x01 + +/* P_IR */ +#define P_IR_PE 0x04 +#define P_IR_SLCT 0x02 +#define P_IR_ERR 0x01 + +/* P_ICR */ +#define P_DS_IRQ 0x8000 /* RW1 */ +#define P_ACK_IRQ 0x4000 /* RW1 */ +#define P_BUSY_IRQ 0x2000 /* RW1 */ +#define P_PE_IRQ 0x1000 /* RW1 */ +#define P_SLCT_IRQ 0x0800 /* RW1 */ +#define P_ERR_IRQ 0x0400 /* RW1 */ +#define P_DS_IRQ_EN 0x0200 /* RW Always on rising edge */ +#define P_ACK_IRQ_EN 0x0100 /* RW Always on rising edge */ +#define P_BUSY_IRP 0x0080 /* RW 1= rising edge */ +#define P_BUSY_IRQ_EN 0x0040 /* RW */ +#define P_PE_IRP 0x0020 /* RW 1= rising edge */ +#define P_PE_IRQ_EN 0x0010 /* RW */ +#define P_SLCT_IRP 0x0008 /* RW 1= rising edge */ +#define P_SLCT_IRQ_EN 0x0004 /* RW */ +#define P_ERR_IRP 0x0002 /* RW1 1= rising edge */ +#define P_ERR_IRQ_EN 0x0001 /* RW */ + +#endif /* !(_ASM_SPARC_SUNBPP_H) */ diff --git a/arch/sparc/include/asm/swift.h b/arch/sparc/include/asm/swift.h new file mode 100644 index 00000000000..e535061bf75 --- /dev/null +++ b/arch/sparc/include/asm/swift.h @@ -0,0 +1,106 @@ +/* swift.h: Specific definitions for the _broken_ Swift SRMMU + * MMU module. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_SWIFT_H +#define _SPARC_SWIFT_H + +/* Swift is so brain damaged, here is the mmu control register. */ +#define SWIFT_ST 0x00800000 /* SW tablewalk enable */ +#define SWIFT_WP 0x00400000 /* Watchpoint enable */ + +/* Branch folding (buggy, disable on production systems!) */ +#define SWIFT_BF 0x00200000 +#define SWIFT_PMC 0x00180000 /* Page mode control */ +#define SWIFT_PE 0x00040000 /* Parity enable */ +#define SWIFT_PC 0x00020000 /* Parity control */ +#define SWIFT_AP 0x00010000 /* Graphics page mode control (TCX/SX) */ +#define SWIFT_AC 0x00008000 /* Alternate Cacheability (see viking.h) */ +#define SWIFT_BM 0x00004000 /* Boot mode */ +#define SWIFT_RC 0x00003c00 /* DRAM refresh control */ +#define SWIFT_IE 0x00000200 /* Instruction cache enable */ +#define SWIFT_DE 0x00000100 /* Data cache enable */ +#define SWIFT_SA 0x00000080 /* Store Allocate */ +#define SWIFT_NF 0x00000002 /* No fault mode */ +#define SWIFT_EN 0x00000001 /* MMU enable */ + +/* Bits [13:5] select one of 512 instruction cache tags */ +static inline void swift_inv_insn_tag(unsigned long addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_TXTC_TAG) + : "memory"); +} + +/* Bits [12:4] select one of 512 data cache tags */ +static inline void swift_inv_data_tag(unsigned long addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_DATAC_TAG) + : "memory"); +} + +static inline void swift_flush_dcache(void) +{ + unsigned long addr; + + for (addr = 0; addr < 0x2000; addr += 0x10) + swift_inv_data_tag(addr); +} + +static inline void swift_flush_icache(void) +{ + unsigned long addr; + + for (addr = 0; addr < 0x4000; addr += 0x20) + swift_inv_insn_tag(addr); +} + +static inline void swift_idflash_clear(void) +{ + unsigned long addr; + + for (addr = 0; addr < 0x2000; addr += 0x10) { + swift_inv_insn_tag(addr<<1); + swift_inv_data_tag(addr); + } +} + +/* Swift is so broken, it isn't even safe to use the following. */ +static inline void swift_flush_page(unsigned long page) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (page), "i" (ASI_M_FLUSH_PAGE) + : "memory"); +} + +static inline void swift_flush_segment(unsigned long addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_FLUSH_SEG) + : "memory"); +} + +static inline void swift_flush_region(unsigned long addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_FLUSH_REGION) + : "memory"); +} + +static inline void swift_flush_context(void) +{ + __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" + : /* no outputs */ + : "i" (ASI_M_FLUSH_CTX) + : "memory"); +} + +#endif /* !(_SPARC_SWIFT_H) */ diff --git a/arch/sparc/include/asm/syscall.h b/arch/sparc/include/asm/syscall.h new file mode 100644 index 00000000000..7486c605e23 --- /dev/null +++ b/arch/sparc/include/asm/syscall.h @@ -0,0 +1,120 @@ +#ifndef __ASM_SPARC_SYSCALL_H +#define __ASM_SPARC_SYSCALL_H + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <asm/ptrace.h> + +/* The system call number is given by the user in %g1 */ +static inline long syscall_get_nr(struct task_struct *task, + struct pt_regs *regs) +{ + int syscall_p = pt_regs_is_syscall(regs); + + return (syscall_p ? regs->u_regs[UREG_G1] : -1L); +} + +static inline void syscall_rollback(struct task_struct *task, + struct pt_regs *regs) +{ + /* XXX This needs some thought. On Sparc we don't + * XXX save away the original %o0 value somewhere. + * XXX Instead we hold it in register %l5 at the top + * XXX level trap frame and pass this down to the signal + * XXX dispatch code which is the only place that value + * XXX ever was needed. + */ +} + +#ifdef CONFIG_SPARC32 +static inline bool syscall_has_error(struct pt_regs *regs) +{ + return (regs->psr & PSR_C) ? true : false; +} +static inline void syscall_set_error(struct pt_regs *regs) +{ + regs->psr |= PSR_C; +} +static inline void syscall_clear_error(struct pt_regs *regs) +{ + regs->psr &= ~PSR_C; +} +#else +static inline bool syscall_has_error(struct pt_regs *regs) +{ + return (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY)) ? true : false; +} +static inline void syscall_set_error(struct pt_regs *regs) +{ + regs->tstate |= (TSTATE_XCARRY | TSTATE_ICARRY); +} +static inline void syscall_clear_error(struct pt_regs *regs) +{ + regs->tstate &= ~(TSTATE_XCARRY | TSTATE_ICARRY); +} +#endif + +static inline long syscall_get_error(struct task_struct *task, + struct pt_regs *regs) +{ + long val = regs->u_regs[UREG_I0]; + + return (syscall_has_error(regs) ? -val : 0); +} + +static inline long syscall_get_return_value(struct task_struct *task, + struct pt_regs *regs) +{ + long val = regs->u_regs[UREG_I0]; + + return val; +} + +static inline void syscall_set_return_value(struct task_struct *task, + struct pt_regs *regs, + int error, long val) +{ + if (error) { + syscall_set_error(regs); + regs->u_regs[UREG_I0] = -error; + } else { + syscall_clear_error(regs); + regs->u_regs[UREG_I0] = val; + } +} + +static inline void syscall_get_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + unsigned long *args) +{ + int zero_extend = 0; + unsigned int j; + +#ifdef CONFIG_SPARC64 + if (test_tsk_thread_flag(task, TIF_32BIT)) + zero_extend = 1; +#endif + + for (j = 0; j < n; j++) { + unsigned long val = regs->u_regs[UREG_I0 + i + j]; + + if (zero_extend) + args[j] = (u32) val; + else + args[j] = val; + } +} + +static inline void syscall_set_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + const unsigned long *args) +{ + unsigned int j; + + for (j = 0; j < n; j++) + regs->u_regs[UREG_I0 + i + j] = args[j]; +} + +#endif /* __ASM_SPARC_SYSCALL_H */ diff --git a/arch/sparc/include/asm/syscalls.h b/arch/sparc/include/asm/syscalls.h new file mode 100644 index 00000000000..45a43f637a1 --- /dev/null +++ b/arch/sparc/include/asm/syscalls.h @@ -0,0 +1,13 @@ +#ifndef _SPARC64_SYSCALLS_H +#define _SPARC64_SYSCALLS_H + +struct pt_regs; + +extern asmlinkage long sparc_do_fork(unsigned long clone_flags, + unsigned long stack_start, + struct pt_regs *regs, + unsigned long stack_size); + +extern asmlinkage int sparc_execve(struct pt_regs *regs); + +#endif /* _SPARC64_SYSCALLS_H */ diff --git a/arch/sparc/include/asm/sysen.h b/arch/sparc/include/asm/sysen.h new file mode 100644 index 00000000000..6af34abde6e --- /dev/null +++ b/arch/sparc/include/asm/sysen.h @@ -0,0 +1,15 @@ +/* + * sysen.h: Bit fields within the "System Enable" register accessed via + * the ASI_CONTROL address space at address AC_SYSENABLE. + * + * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_SYSEN_H +#define _SPARC_SYSEN_H + +#define SENABLE_DVMA 0x20 /* enable dvma transfers */ +#define SENABLE_CACHE 0x10 /* enable VAC cache */ +#define SENABLE_RESET 0x04 /* reset whole machine, danger Will Robinson */ + +#endif /* _SPARC_SYSEN_H */ diff --git a/arch/sparc/include/asm/system.h b/arch/sparc/include/asm/system.h new file mode 100644 index 00000000000..7944a7cfc99 --- /dev/null +++ b/arch/sparc/include/asm/system.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_SYSTEM_H +#define ___ASM_SPARC_SYSTEM_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/system_64.h> +#else +#include <asm/system_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/system_32.h b/arch/sparc/include/asm/system_32.h new file mode 100644 index 00000000000..b4b024445fc --- /dev/null +++ b/arch/sparc/include/asm/system_32.h @@ -0,0 +1,288 @@ +#ifndef __SPARC_SYSTEM_H +#define __SPARC_SYSTEM_H + +#include <linux/kernel.h> +#include <linux/threads.h> /* NR_CPUS */ +#include <linux/thread_info.h> + +#include <asm/page.h> +#include <asm/psr.h> +#include <asm/ptrace.h> +#include <asm/btfixup.h> +#include <asm/smp.h> + +#ifndef __ASSEMBLY__ + +#include <linux/irqflags.h> + +/* + * Sparc (general) CPU types + */ +enum sparc_cpu { + sun4 = 0x00, + sun4c = 0x01, + sun4m = 0x02, + sun4d = 0x03, + sun4e = 0x04, + sun4u = 0x05, /* V8 ploos ploos */ + sun_unknown = 0x06, + ap1000 = 0x07, /* almost a sun4m */ +}; + +/* Really, userland should not be looking at any of this... */ +#ifdef __KERNEL__ + +extern enum sparc_cpu sparc_cpu_model; + +#ifndef CONFIG_SUN4 +#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c) +#define ARCH_SUN4 0 +#else +#define ARCH_SUN4C_SUN4 1 +#define ARCH_SUN4 1 +#endif + +#define SUN4M_NCPUS 4 /* Architectural limit of sun4m. */ + +extern char reboot_command[]; + +extern struct thread_info *current_set[NR_CPUS]; + +extern unsigned long empty_bad_page; +extern unsigned long empty_bad_page_table; +extern unsigned long empty_zero_page; + +extern void sun_do_break(void); +extern int serial_console; +extern int stop_a_enabled; + +static inline int con_is_present(void) +{ + return serial_console ? 0 : 1; +} + +/* When a context switch happens we must flush all user windows so that + * the windows of the current process are flushed onto its stack. This + * way the windows are all clean for the next process and the stack + * frames are up to date. + */ +extern void flush_user_windows(void); +extern void kill_user_windows(void); +extern void synchronize_user_stack(void); +extern void fpsave(unsigned long *fpregs, unsigned long *fsr, + void *fpqueue, unsigned long *fpqdepth); + +#ifdef CONFIG_SMP +#define SWITCH_ENTER(prv) \ + do { \ + if (test_tsk_thread_flag(prv, TIF_USEDFPU)) { \ + put_psr(get_psr() | PSR_EF); \ + fpsave(&(prv)->thread.float_regs[0], &(prv)->thread.fsr, \ + &(prv)->thread.fpqueue[0], &(prv)->thread.fpqdepth); \ + clear_tsk_thread_flag(prv, TIF_USEDFPU); \ + (prv)->thread.kregs->psr &= ~PSR_EF; \ + } \ + } while(0) + +#define SWITCH_DO_LAZY_FPU(next) /* */ +#else +#define SWITCH_ENTER(prv) /* */ +#define SWITCH_DO_LAZY_FPU(nxt) \ + do { \ + if (last_task_used_math != (nxt)) \ + (nxt)->thread.kregs->psr&=~PSR_EF; \ + } while(0) +#endif + +extern void flushw_all(void); + +/* + * Flush windows so that the VM switch which follows + * would not pull the stack from under us. + * + * SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work) + * XXX WTF is the above comment? Found in late teen 2.4.x. + */ +#define prepare_arch_switch(next) do { \ + __asm__ __volatile__( \ + ".globl\tflush_patch_switch\nflush_patch_switch:\n\t" \ + "save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \ + "save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \ + "save %sp, -0x40, %sp\n\t" \ + "restore; restore; restore; restore; restore; restore; restore"); \ +} while(0) + + /* Much care has gone into this code, do not touch it. + * + * We need to loadup regs l0/l1 for the newly forked child + * case because the trap return path relies on those registers + * holding certain values, gcc is told that they are clobbered. + * Gcc needs registers for 3 values in and 1 value out, so we + * clobber every non-fixed-usage register besides l2/l3/o4/o5. -DaveM + * + * Hey Dave, that do not touch sign is too much of an incentive + * - Anton & Pete + */ +#define switch_to(prev, next, last) do { \ + SWITCH_ENTER(prev); \ + SWITCH_DO_LAZY_FPU(next); \ + cpu_set(smp_processor_id(), next->active_mm->cpu_vm_mask); \ + __asm__ __volatile__( \ + "sethi %%hi(here - 0x8), %%o7\n\t" \ + "mov %%g6, %%g3\n\t" \ + "or %%o7, %%lo(here - 0x8), %%o7\n\t" \ + "rd %%psr, %%g4\n\t" \ + "std %%sp, [%%g6 + %4]\n\t" \ + "rd %%wim, %%g5\n\t" \ + "wr %%g4, 0x20, %%psr\n\t" \ + "nop\n\t" \ + "std %%g4, [%%g6 + %3]\n\t" \ + "ldd [%2 + %3], %%g4\n\t" \ + "mov %2, %%g6\n\t" \ + ".globl patchme_store_new_current\n" \ +"patchme_store_new_current:\n\t" \ + "st %2, [%1]\n\t" \ + "wr %%g4, 0x20, %%psr\n\t" \ + "nop\n\t" \ + "nop\n\t" \ + "nop\n\t" /* LEON needs all 3 nops: load to %sp depends on CWP. */ \ + "ldd [%%g6 + %4], %%sp\n\t" \ + "wr %%g5, 0x0, %%wim\n\t" \ + "ldd [%%sp + 0x00], %%l0\n\t" \ + "ldd [%%sp + 0x38], %%i6\n\t" \ + "wr %%g4, 0x0, %%psr\n\t" \ + "nop\n\t" \ + "nop\n\t" \ + "jmpl %%o7 + 0x8, %%g0\n\t" \ + " ld [%%g3 + %5], %0\n\t" \ + "here:\n" \ + : "=&r" (last) \ + : "r" (&(current_set[hard_smp_processor_id()])), \ + "r" (task_thread_info(next)), \ + "i" (TI_KPSR), \ + "i" (TI_KSP), \ + "i" (TI_TASK) \ + : "g1", "g2", "g3", "g4", "g5", "g7", \ + "l0", "l1", "l3", "l4", "l5", "l6", "l7", \ + "i0", "i1", "i2", "i3", "i4", "i5", \ + "o0", "o1", "o2", "o3", "o7"); \ + } while(0) + +/* XXX Change this if we ever use a PSO mode kernel. */ +#define mb() __asm__ __volatile__ ("" : : : "memory") +#define rmb() mb() +#define wmb() mb() +#define read_barrier_depends() do { } while(0) +#define set_mb(__var, __value) do { __var = __value; mb(); } while(0) +#define smp_mb() __asm__ __volatile__("":::"memory") +#define smp_rmb() __asm__ __volatile__("":::"memory") +#define smp_wmb() __asm__ __volatile__("":::"memory") +#define smp_read_barrier_depends() do { } while(0) + +#define nop() __asm__ __volatile__ ("nop") + +/* This has special calling conventions */ +#ifndef CONFIG_SMP +BTFIXUPDEF_CALL(void, ___xchg32, void) +#endif + +static inline unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val) +{ +#ifdef CONFIG_SMP + __asm__ __volatile__("swap [%2], %0" + : "=&r" (val) + : "0" (val), "r" (m) + : "memory"); + return val; +#else + register unsigned long *ptr asm("g1"); + register unsigned long ret asm("g2"); + + ptr = (unsigned long *) m; + ret = val; + + /* Note: this is magic and the nop there is + really needed. */ + __asm__ __volatile__( + "mov %%o7, %%g4\n\t" + "call ___f____xchg32\n\t" + " nop\n\t" + : "=&r" (ret) + : "0" (ret), "r" (ptr) + : "g3", "g4", "g7", "memory", "cc"); + + return ret; +#endif +} + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) + +extern void __xchg_called_with_bad_pointer(void); + +static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size) +{ + switch (size) { + case 4: + return xchg_u32(ptr, x); + }; + __xchg_called_with_bad_pointer(); + return x; +} + +/* Emulate cmpxchg() the same way we emulate atomics, + * by hashing the object address and indexing into an array + * of spinlocks to get a bit of performance... + * + * See arch/sparc/lib/atomic32.c for implementation. + * + * Cribbed from <asm-parisc/atomic.h> + */ +#define __HAVE_ARCH_CMPXCHG 1 + +/* bug catcher for when unsupported size is used - won't link */ +extern void __cmpxchg_called_with_bad_pointer(void); +/* we only need to support cmpxchg of a u32 on sparc */ +extern unsigned long __cmpxchg_u32(volatile u32 *m, u32 old, u32 new_); + +/* don't worry...optimizer will get rid of most of this */ +static inline unsigned long +__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32((u32 *)ptr, (u32)old, (u32)new_); + default: + __cmpxchg_called_with_bad_pointer(); + break; + } + return old; +} + +#define cmpxchg(ptr, o, n) \ +({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr))); \ +}) + +#include <asm-generic/cmpxchg-local.h> + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn)); + +#endif /* __KERNEL__ */ + +#endif /* __ASSEMBLY__ */ + +#define arch_align_stack(x) (x) + +#endif /* !(__SPARC_SYSTEM_H) */ diff --git a/arch/sparc/include/asm/system_64.h b/arch/sparc/include/asm/system_64.h new file mode 100644 index 00000000000..db9e742a406 --- /dev/null +++ b/arch/sparc/include/asm/system_64.h @@ -0,0 +1,355 @@ +#ifndef __SPARC64_SYSTEM_H +#define __SPARC64_SYSTEM_H + +#include <asm/ptrace.h> +#include <asm/processor.h> +#include <asm/visasm.h> + +#ifndef __ASSEMBLY__ + +#include <linux/irqflags.h> +#include <asm-generic/cmpxchg-local.h> + +/* + * Sparc (general) CPU types + */ +enum sparc_cpu { + sun4 = 0x00, + sun4c = 0x01, + sun4m = 0x02, + sun4d = 0x03, + sun4e = 0x04, + sun4u = 0x05, /* V8 ploos ploos */ + sun_unknown = 0x06, + ap1000 = 0x07, /* almost a sun4m */ +}; + +#define sparc_cpu_model sun4u + +/* This cannot ever be a sun4c nor sun4 :) That's just history. */ +#define ARCH_SUN4C_SUN4 0 +#define ARCH_SUN4 0 + +extern char reboot_command[]; + +/* These are here in an effort to more fully work around Spitfire Errata + * #51. Essentially, if a memory barrier occurs soon after a mispredicted + * branch, the chip can stop executing instructions until a trap occurs. + * Therefore, if interrupts are disabled, the chip can hang forever. + * + * It used to be believed that the memory barrier had to be right in the + * delay slot, but a case has been traced recently wherein the memory barrier + * was one instruction after the branch delay slot and the chip still hung. + * The offending sequence was the following in sym_wakeup_done() of the + * sym53c8xx_2 driver: + * + * call sym_ccb_from_dsa, 0 + * movge %icc, 0, %l0 + * brz,pn %o0, .LL1303 + * mov %o0, %l2 + * membar #LoadLoad + * + * The branch has to be mispredicted for the bug to occur. Therefore, we put + * the memory barrier explicitly into a "branch always, predicted taken" + * delay slot to avoid the problem case. + */ +#define membar_safe(type) \ +do { __asm__ __volatile__("ba,pt %%xcc, 1f\n\t" \ + " membar " type "\n" \ + "1:\n" \ + : : : "memory"); \ +} while (0) + +#define mb() \ + membar_safe("#LoadLoad | #LoadStore | #StoreStore | #StoreLoad") +#define rmb() \ + membar_safe("#LoadLoad") +#define wmb() \ + membar_safe("#StoreStore") +#define membar_storeload() \ + membar_safe("#StoreLoad") +#define membar_storeload_storestore() \ + membar_safe("#StoreLoad | #StoreStore") +#define membar_storeload_loadload() \ + membar_safe("#StoreLoad | #LoadLoad") +#define membar_storestore_loadstore() \ + membar_safe("#StoreStore | #LoadStore") + +#endif + +#define nop() __asm__ __volatile__ ("nop") + +#define read_barrier_depends() do { } while(0) +#define set_mb(__var, __value) \ + do { __var = __value; membar_storeload_storestore(); } while(0) + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#else +#define smp_mb() __asm__ __volatile__("":::"memory") +#define smp_rmb() __asm__ __volatile__("":::"memory") +#define smp_wmb() __asm__ __volatile__("":::"memory") +#define smp_read_barrier_depends() do { } while(0) +#endif + +#define flushi(addr) __asm__ __volatile__ ("flush %0" : : "r" (addr) : "memory") + +#define flushw_all() __asm__ __volatile__("flushw") + +/* Performance counter register access. */ +#define read_pcr(__p) __asm__ __volatile__("rd %%pcr, %0" : "=r" (__p)) +#define write_pcr(__p) __asm__ __volatile__("wr %0, 0x0, %%pcr" : : "r" (__p)) +#define read_pic(__p) __asm__ __volatile__("rd %%pic, %0" : "=r" (__p)) + +/* Blackbird errata workaround. See commentary in + * arch/sparc64/kernel/smp.c:smp_percpu_timer_interrupt() + * for more information. + */ +#define reset_pic() \ + __asm__ __volatile__("ba,pt %xcc, 99f\n\t" \ + ".align 64\n" \ + "99:wr %g0, 0x0, %pic\n\t" \ + "rd %pic, %g0") + +#ifndef __ASSEMBLY__ + +extern void sun_do_break(void); +extern int stop_a_enabled; + +extern void fault_in_user_windows(void); +extern void synchronize_user_stack(void); + +extern void __flushw_user(void); +#define flushw_user() __flushw_user() + +#define flush_user_windows flushw_user +#define flush_register_windows flushw_all + +/* Don't hold the runqueue lock over context switch */ +#define __ARCH_WANT_UNLOCKED_CTXSW +#define prepare_arch_switch(next) \ +do { \ + flushw_all(); \ +} while (0) + + /* See what happens when you design the chip correctly? + * + * We tell gcc we clobber all non-fixed-usage registers except + * for l0/l1. It will use one for 'next' and the other to hold + * the output value of 'last'. 'next' is not referenced again + * past the invocation of switch_to in the scheduler, so we need + * not preserve it's value. Hairy, but it lets us remove 2 loads + * and 2 stores in this critical code path. -DaveM + */ +#define switch_to(prev, next, last) \ +do { if (test_thread_flag(TIF_PERFCTR)) { \ + unsigned long __tmp; \ + read_pcr(__tmp); \ + current_thread_info()->pcr_reg = __tmp; \ + read_pic(__tmp); \ + current_thread_info()->kernel_cntd0 += (unsigned int)(__tmp);\ + current_thread_info()->kernel_cntd1 += ((__tmp) >> 32); \ + } \ + flush_tlb_pending(); \ + save_and_clear_fpu(); \ + /* If you are tempted to conditionalize the following */ \ + /* so that ASI is only written if it changes, think again. */ \ + __asm__ __volatile__("wr %%g0, %0, %%asi" \ + : : "r" (__thread_flag_byte_ptr(task_thread_info(next))[TI_FLAG_BYTE_CURRENT_DS]));\ + trap_block[current_thread_info()->cpu].thread = \ + task_thread_info(next); \ + __asm__ __volatile__( \ + "mov %%g4, %%g7\n\t" \ + "stx %%i6, [%%sp + 2047 + 0x70]\n\t" \ + "stx %%i7, [%%sp + 2047 + 0x78]\n\t" \ + "rdpr %%wstate, %%o5\n\t" \ + "stx %%o6, [%%g6 + %6]\n\t" \ + "stb %%o5, [%%g6 + %5]\n\t" \ + "rdpr %%cwp, %%o5\n\t" \ + "stb %%o5, [%%g6 + %8]\n\t" \ + "mov %4, %%g6\n\t" \ + "ldub [%4 + %8], %%g1\n\t" \ + "wrpr %%g1, %%cwp\n\t" \ + "ldx [%%g6 + %6], %%o6\n\t" \ + "ldub [%%g6 + %5], %%o5\n\t" \ + "ldub [%%g6 + %7], %%o7\n\t" \ + "wrpr %%o5, 0x0, %%wstate\n\t" \ + "ldx [%%sp + 2047 + 0x70], %%i6\n\t" \ + "ldx [%%sp + 2047 + 0x78], %%i7\n\t" \ + "ldx [%%g6 + %9], %%g4\n\t" \ + "brz,pt %%o7, switch_to_pc\n\t" \ + " mov %%g7, %0\n\t" \ + "sethi %%hi(ret_from_syscall), %%g1\n\t" \ + "jmpl %%g1 + %%lo(ret_from_syscall), %%g0\n\t" \ + " nop\n\t" \ + ".globl switch_to_pc\n\t" \ + "switch_to_pc:\n\t" \ + : "=&r" (last), "=r" (current), "=r" (current_thread_info_reg), \ + "=r" (__local_per_cpu_offset) \ + : "0" (task_thread_info(next)), \ + "i" (TI_WSTATE), "i" (TI_KSP), "i" (TI_NEW_CHILD), \ + "i" (TI_CWP), "i" (TI_TASK) \ + : "cc", \ + "g1", "g2", "g3", "g7", \ + "l1", "l2", "l3", "l4", "l5", "l6", "l7", \ + "i0", "i1", "i2", "i3", "i4", "i5", \ + "o0", "o1", "o2", "o3", "o4", "o5", "o7"); \ + /* If you fuck with this, update ret_from_syscall code too. */ \ + if (test_thread_flag(TIF_PERFCTR)) { \ + write_pcr(current_thread_info()->pcr_reg); \ + reset_pic(); \ + } \ +} while(0) + +static inline unsigned long xchg32(__volatile__ unsigned int *m, unsigned int val) +{ + unsigned long tmp1, tmp2; + + __asm__ __volatile__( +" membar #StoreLoad | #LoadLoad\n" +" mov %0, %1\n" +"1: lduw [%4], %2\n" +" cas [%4], %2, %0\n" +" cmp %2, %0\n" +" bne,a,pn %%icc, 1b\n" +" mov %1, %0\n" +" membar #StoreLoad | #StoreStore\n" + : "=&r" (val), "=&r" (tmp1), "=&r" (tmp2) + : "0" (val), "r" (m) + : "cc", "memory"); + return val; +} + +static inline unsigned long xchg64(__volatile__ unsigned long *m, unsigned long val) +{ + unsigned long tmp1, tmp2; + + __asm__ __volatile__( +" membar #StoreLoad | #LoadLoad\n" +" mov %0, %1\n" +"1: ldx [%4], %2\n" +" casx [%4], %2, %0\n" +" cmp %2, %0\n" +" bne,a,pn %%xcc, 1b\n" +" mov %1, %0\n" +" membar #StoreLoad | #StoreStore\n" + : "=&r" (val), "=&r" (tmp1), "=&r" (tmp2) + : "0" (val), "r" (m) + : "cc", "memory"); + return val; +} + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) + +extern void __xchg_called_with_bad_pointer(void); + +static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr, + int size) +{ + switch (size) { + case 4: + return xchg32(ptr, x); + case 8: + return xchg64(ptr, x); + }; + __xchg_called_with_bad_pointer(); + return x; +} + +extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn)); + +/* + * Atomic compare and exchange. Compare OLD with MEM, if identical, + * store NEW in MEM. Return the initial value in MEM. Success is + * indicated by comparing RETURN with OLD. + */ + +#define __HAVE_ARCH_CMPXCHG 1 + +static inline unsigned long +__cmpxchg_u32(volatile int *m, int old, int new) +{ + __asm__ __volatile__("membar #StoreLoad | #LoadLoad\n" + "cas [%2], %3, %0\n\t" + "membar #StoreLoad | #StoreStore" + : "=&r" (new) + : "0" (new), "r" (m), "r" (old) + : "memory"); + + return new; +} + +static inline unsigned long +__cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new) +{ + __asm__ __volatile__("membar #StoreLoad | #LoadLoad\n" + "casx [%2], %3, %0\n\t" + "membar #StoreLoad | #StoreStore" + : "=&r" (new) + : "0" (new), "r" (m), "r" (old) + : "memory"); + + return new; +} + +/* This function doesn't exist, so you'll get a linker error + if something tries to do an invalid cmpxchg(). */ +extern void __cmpxchg_called_with_bad_pointer(void); + +static inline unsigned long +__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32(ptr, old, new); + case 8: + return __cmpxchg_u64(ptr, old, new); + } + __cmpxchg_called_with_bad_pointer(); + return old; +} + +#define cmpxchg(ptr,o,n) \ + ({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr))); \ + }) + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ + +static inline unsigned long __cmpxchg_local(volatile void *ptr, + unsigned long old, + unsigned long new, int size) +{ + switch (size) { + case 4: + case 8: return __cmpxchg(ptr, old, new, size); + default: + return __cmpxchg_local_generic(ptr, old, new, size); + } + + return old; +} + +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \ + (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg64_local(ptr, o, n) \ + ({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg_local((ptr), (o), (n)); \ + }) + +#endif /* !(__ASSEMBLY__) */ + +#define arch_align_stack(x) (x) + +#endif /* !(__SPARC64_SYSTEM_H) */ diff --git a/arch/sparc/include/asm/termbits.h b/arch/sparc/include/asm/termbits.h new file mode 100644 index 00000000000..d6ca3e2754f --- /dev/null +++ b/arch/sparc/include/asm/termbits.h @@ -0,0 +1,266 @@ +#ifndef _SPARC_TERMBITS_H +#define _SPARC_TERMBITS_H + +#include <linux/posix_types.h> + +typedef unsigned char cc_t; +typedef unsigned int speed_t; + +#if defined(__sparc__) && defined(__arch64__) +typedef unsigned int tcflag_t; +#else +typedef unsigned long tcflag_t; +#endif + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +#define NCCS 17 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +#ifdef __KERNEL__ +#define SIZEOF_USER_TERMIOS sizeof (struct termios) - (2*sizeof (cc_t)) + cc_t _x_cc[2]; /* We need them to hold vmin/vtime */ +#endif +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + cc_t _x_cc[2]; /* padding to match ktermios */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + cc_t _x_cc[2]; /* We need them to hold vmin/vtime */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VEOL 5 +#define VEOL2 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 + + + +#define VSUSP 10 +#define VDSUSP 11 /* SunOS POSIX nicety I do believe... */ +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 + +/* Kernel keeps vmin/vtime separated, user apps assume vmin/vtime is + * shared with eof/eol + */ +#ifdef __KERNEL__ +#define VMIN 16 +#define VTIME 17 +#else +#define VMIN VEOF +#define VTIME VEOL +#endif + +/* c_iflag bits */ +#define IGNBRK 0x00000001 +#define BRKINT 0x00000002 +#define IGNPAR 0x00000004 +#define PARMRK 0x00000008 +#define INPCK 0x00000010 +#define ISTRIP 0x00000020 +#define INLCR 0x00000040 +#define IGNCR 0x00000080 +#define ICRNL 0x00000100 +#define IUCLC 0x00000200 +#define IXON 0x00000400 +#define IXANY 0x00000800 +#define IXOFF 0x00001000 +#define IMAXBEL 0x00002000 +#define IUTF8 0x00004000 + +/* c_oflag bits */ +#define OPOST 0x00000001 +#define OLCUC 0x00000002 +#define ONLCR 0x00000004 +#define OCRNL 0x00000008 +#define ONOCR 0x00000010 +#define ONLRET 0x00000020 +#define OFILL 0x00000040 +#define OFDEL 0x00000080 +#define NLDLY 0x00000100 +#define NL0 0x00000000 +#define NL1 0x00000100 +#define CRDLY 0x00000600 +#define CR0 0x00000000 +#define CR1 0x00000200 +#define CR2 0x00000400 +#define CR3 0x00000600 +#define TABDLY 0x00001800 +#define TAB0 0x00000000 +#define TAB1 0x00000800 +#define TAB2 0x00001000 +#define TAB3 0x00001800 +#define XTABS 0x00001800 +#define BSDLY 0x00002000 +#define BS0 0x00000000 +#define BS1 0x00002000 +#define VTDLY 0x00004000 +#define VT0 0x00000000 +#define VT1 0x00004000 +#define FFDLY 0x00008000 +#define FF0 0x00000000 +#define FF1 0x00008000 +#define PAGEOUT 0x00010000 /* SUNOS specific */ +#define WRAP 0x00020000 /* SUNOS specific */ + +/* c_cflag bit meaning */ +#define CBAUD 0x0000100f +#define B0 0x00000000 /* hang up */ +#define B50 0x00000001 +#define B75 0x00000002 +#define B110 0x00000003 +#define B134 0x00000004 +#define B150 0x00000005 +#define B200 0x00000006 +#define B300 0x00000007 +#define B600 0x00000008 +#define B1200 0x00000009 +#define B1800 0x0000000a +#define B2400 0x0000000b +#define B4800 0x0000000c +#define B9600 0x0000000d +#define B19200 0x0000000e +#define B38400 0x0000000f +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0x00000030 +#define CS5 0x00000000 +#define CS6 0x00000010 +#define CS7 0x00000020 +#define CS8 0x00000030 +#define CSTOPB 0x00000040 +#define CREAD 0x00000080 +#define PARENB 0x00000100 +#define PARODD 0x00000200 +#define HUPCL 0x00000400 +#define CLOCAL 0x00000800 +#define CBAUDEX 0x00001000 +/* We'll never see these speeds with the Zilogs, but for completeness... */ +#define BOTHER 0x00001000 +#define B57600 0x00001001 +#define B115200 0x00001002 +#define B230400 0x00001003 +#define B460800 0x00001004 +/* This is what we can do with the Zilogs. */ +#define B76800 0x00001005 +/* This is what we can do with the SAB82532. */ +#define B153600 0x00001006 +#define B307200 0x00001007 +#define B614400 0x00001008 +#define B921600 0x00001009 +/* And these are the rest... */ +#define B500000 0x0000100a +#define B576000 0x0000100b +#define B1000000 0x0000100c +#define B1152000 0x0000100d +#define B1500000 0x0000100e +#define B2000000 0x0000100f +/* These have totally bogus values and nobody uses them + so far. Later on we'd have to use say 0x10000x and + adjust CBAUD constant and drivers accordingly. +#define B2500000 0x00001010 +#define B3000000 0x00001011 +#define B3500000 0x00001012 +#define B4000000 0x00001013 */ +#define CIBAUD 0x100f0000 /* input baud rate (not used) */ +#define CMSPAR 0x40000000 /* mark or space (stick) parity */ +#define CRTSCTS 0x80000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0x00000001 +#define ICANON 0x00000002 +#define XCASE 0x00000004 +#define ECHO 0x00000008 +#define ECHOE 0x00000010 +#define ECHOK 0x00000020 +#define ECHONL 0x00000040 +#define NOFLSH 0x00000080 +#define TOSTOP 0x00000100 +#define ECHOCTL 0x00000200 +#define ECHOPRT 0x00000400 +#define ECHOKE 0x00000800 +#define DEFECHO 0x00001000 /* SUNOS thing, what is it? */ +#define FLUSHO 0x00002000 +#define PENDIN 0x00004000 +#define IEXTEN 0x00008000 + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* !(_SPARC_TERMBITS_H) */ diff --git a/arch/sparc/include/asm/termios.h b/arch/sparc/include/asm/termios.h new file mode 100644 index 00000000000..e8ba9539964 --- /dev/null +++ b/arch/sparc/include/asm/termios.h @@ -0,0 +1,186 @@ +#ifndef _SPARC_TERMIOS_H +#define _SPARC_TERMIOS_H + +#include <asm/ioctls.h> +#include <asm/termbits.h> + +#if defined(__KERNEL__) || defined(__DEFINE_BSD_TERMIOS) +struct sgttyb { + char sg_ispeed; + char sg_ospeed; + char sg_erase; + char sg_kill; + short sg_flags; +}; + +struct tchars { + char t_intrc; + char t_quitc; + char t_startc; + char t_stopc; + char t_eofc; + char t_brkc; +}; + +struct ltchars { + char t_suspc; + char t_dsuspc; + char t_rprntc; + char t_flushc; + char t_werasc; + char t_lnextc; +}; +#endif /* __KERNEL__ */ + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#ifdef __KERNEL__ +#include <linux/module.h> + +/* + * c_cc characters in the termio structure. Oh, how I love being + * backwardly compatible. Notice that character 4 and 5 are + * interpreted differently depending on whether ICANON is set in + * c_lflag. If it's set, they are used as _VEOF and _VEOL, otherwise + * as _VMIN and V_TIME. This is for compatibility with OSF/1 (which + * is compatible with sysV)... + */ +#define _VMIN 4 +#define _VTIME 5 + +/* intr=^C quit=^\ erase=del kill=^U + eof=^D eol=\0 eol2=\0 sxtc=\0 + start=^Q stop=^S susp=^Z dsusp=^Y + reprint=^R discard=^U werase=^W lnext=^V + vmin=\1 vtime=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\000\000\000\021\023\032\031\022\025\027\026\001" + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + unsigned short tmp; \ + int err; \ + err = get_user(tmp, &(termio)->c_iflag); \ + (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \ + err |= get_user(tmp, &(termio)->c_oflag); \ + (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \ + err |= get_user(tmp, &(termio)->c_cflag); \ + (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \ + err |= get_user(tmp, &(termio)->c_lflag); \ + (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \ + err |= copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ + err; \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + * + * Note the "fun" _VMIN overloading. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + int err; \ + err = put_user((termios)->c_iflag, &(termio)->c_iflag); \ + err |= put_user((termios)->c_oflag, &(termio)->c_oflag); \ + err |= put_user((termios)->c_cflag, &(termio)->c_cflag); \ + err |= put_user((termios)->c_lflag, &(termio)->c_lflag); \ + err |= put_user((termios)->c_line, &(termio)->c_line); \ + err |= copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ + if (!((termios)->c_lflag & ICANON)) { \ + err |= put_user((termios)->c_cc[VMIN], &(termio)->c_cc[_VMIN]); \ + err |= put_user((termios)->c_cc[VTIME], &(termio)->c_cc[_VTIME]); \ + } \ + err; \ +}) + +#define user_termios_to_kernel_termios(k, u) \ +({ \ + int err; \ + err = get_user((k)->c_iflag, &(u)->c_iflag); \ + err |= get_user((k)->c_oflag, &(u)->c_oflag); \ + err |= get_user((k)->c_cflag, &(u)->c_cflag); \ + err |= get_user((k)->c_lflag, &(u)->c_lflag); \ + err |= get_user((k)->c_line, &(u)->c_line); \ + err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \ + if ((k)->c_lflag & ICANON) { \ + err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ + err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ + } else { \ + err |= get_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ + err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ + } \ + err |= get_user((k)->c_ispeed, &(u)->c_ispeed); \ + err |= get_user((k)->c_ospeed, &(u)->c_ospeed); \ + err; \ +}) + +#define kernel_termios_to_user_termios(u, k) \ +({ \ + int err; \ + err = put_user((k)->c_iflag, &(u)->c_iflag); \ + err |= put_user((k)->c_oflag, &(u)->c_oflag); \ + err |= put_user((k)->c_cflag, &(u)->c_cflag); \ + err |= put_user((k)->c_lflag, &(u)->c_lflag); \ + err |= put_user((k)->c_line, &(u)->c_line); \ + err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \ + if (!((k)->c_lflag & ICANON)) { \ + err |= put_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ + err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ + } else { \ + err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ + err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ + } \ + err |= put_user((k)->c_ispeed, &(u)->c_ispeed); \ + err |= put_user((k)->c_ospeed, &(u)->c_ospeed); \ + err; \ +}) + +#define user_termios_to_kernel_termios_1(k, u) \ +({ \ + int err; \ + err = get_user((k)->c_iflag, &(u)->c_iflag); \ + err |= get_user((k)->c_oflag, &(u)->c_oflag); \ + err |= get_user((k)->c_cflag, &(u)->c_cflag); \ + err |= get_user((k)->c_lflag, &(u)->c_lflag); \ + err |= get_user((k)->c_line, &(u)->c_line); \ + err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \ + if ((k)->c_lflag & ICANON) { \ + err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ + err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ + } else { \ + err |= get_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ + err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ + } \ + err; \ +}) + +#define kernel_termios_to_user_termios_1(u, k) \ +({ \ + int err; \ + err = put_user((k)->c_iflag, &(u)->c_iflag); \ + err |= put_user((k)->c_oflag, &(u)->c_oflag); \ + err |= put_user((k)->c_cflag, &(u)->c_cflag); \ + err |= put_user((k)->c_lflag, &(u)->c_lflag); \ + err |= put_user((k)->c_line, &(u)->c_line); \ + err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \ + if (!((k)->c_lflag & ICANON)) { \ + err |= put_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ + err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ + } else { \ + err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ + err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ + } \ + err; \ +}) + +#endif /* __KERNEL__ */ + +#endif /* _SPARC_TERMIOS_H */ diff --git a/arch/sparc/include/asm/thread_info.h b/arch/sparc/include/asm/thread_info.h new file mode 100644 index 00000000000..122d7acc07e --- /dev/null +++ b/arch/sparc/include/asm/thread_info.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_THREAD_INFO_H +#define ___ASM_SPARC_THREAD_INFO_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/thread_info_64.h> +#else +#include <asm/thread_info_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h new file mode 100644 index 00000000000..cbb892d0dff --- /dev/null +++ b/arch/sparc/include/asm/thread_info_32.h @@ -0,0 +1,158 @@ +/* + * thread_info.h: sparc low-level thread information + * adapted from the ppc version by Pete Zaitcev, which was + * adapted from the i386 version by Paul Mackerras + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * Copyright (c) 2002 Pete Zaitcev (zaitcev@yahoo.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +#include <asm/btfixup.h> +#include <asm/ptrace.h> +#include <asm/page.h> + +/* + * Low level task data. + * + * If you change this, change the TI_* offsets below to match. + */ +#define NSWINS 8 +struct thread_info { + unsigned long uwinmask; + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + int cpu; /* cpu we're on */ + int preempt_count; /* 0 => preemptable, + <0 => BUG */ + int softirq_count; + int hardirq_count; + + /* Context switch saved kernel state. */ + unsigned long ksp; /* ... ksp __attribute__ ((aligned (8))); */ + unsigned long kpc; + unsigned long kpsr; + unsigned long kwim; + + /* A place to store user windows and stack pointers + * when the stack needs inspection. + */ + struct reg_window reg_window[NSWINS]; /* align for ldd! */ + unsigned long rwbuf_stkptrs[NSWINS]; + unsigned long w_saved; + + struct restart_block restart_block; +}; + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .uwinmask = 0, \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* how to get the thread information struct from C */ +register struct thread_info *current_thread_info_reg asm("g6"); +#define current_thread_info() (current_thread_info_reg) + +/* + * thread information allocation + */ +#if PAGE_SHIFT == 13 +#define THREAD_INFO_ORDER 0 +#else /* PAGE_SHIFT */ +#define THREAD_INFO_ORDER 1 +#endif + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +BTFIXUPDEF_CALL(struct thread_info *, alloc_thread_info, void) +#define alloc_thread_info(tsk) BTFIXUP_CALL(alloc_thread_info)() + +BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *) +#define free_thread_info(ti) BTFIXUP_CALL(free_thread_info)(ti) + +#endif /* __ASSEMBLY__ */ + +/* + * Size of kernel stack for each process. + * Observe the order of get_free_pages() in alloc_thread_info(). + * The sun4 has 8K stack too, because it's short on memory, and 16K is a waste. + */ +#define THREAD_SIZE 8192 + +/* + * Offsets in thread_info structure, used in assembly code + * The "#define REGWIN_SZ 0x40" was abolished, so no multiplications. + */ +#define TI_UWINMASK 0x00 /* uwinmask */ +#define TI_TASK 0x04 +#define TI_EXECDOMAIN 0x08 /* exec_domain */ +#define TI_FLAGS 0x0c +#define TI_CPU 0x10 +#define TI_PREEMPT 0x14 /* preempt_count */ +#define TI_SOFTIRQ 0x18 /* softirq_count */ +#define TI_HARDIRQ 0x1c /* hardirq_count */ +#define TI_KSP 0x20 /* ksp */ +#define TI_KPC 0x24 /* kpc (ldd'ed with kpc) */ +#define TI_KPSR 0x28 /* kpsr */ +#define TI_KWIM 0x2c /* kwim (ldd'ed with kpsr) */ +#define TI_REG_WINDOW 0x30 +#define TI_RWIN_SPTRS 0x230 +#define TI_W_SAVED 0x250 +/* #define TI_RESTART_BLOCK 0x25n */ /* Nobody cares */ + +#define PREEMPT_ACTIVE 0x4000000 + +/* + * thread information flag bit numbers + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_RESTORE_SIGMASK 4 /* restore signal mask in do_signal() */ +#define TIF_USEDFPU 8 /* FPU was used by this task + * this quantum (SMP) */ +#define TIF_POLLING_NRFLAG 9 /* true if poll_idle() is polling + * TIF_NEED_RESCHED */ +#define TIF_MEMDIE 10 + +/* as above, but as bit values */ +#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) +#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) +#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) +#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) +#define _TIF_USEDFPU (1<<TIF_USEDFPU) +#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) + +#define _TIF_DO_NOTIFY_RESUME_MASK (_TIF_NOTIFY_RESUME | \ + _TIF_SIGPENDING | \ + _TIF_RESTORE_SIGMASK) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_THREAD_INFO_H */ diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h new file mode 100644 index 00000000000..c0a737d7292 --- /dev/null +++ b/arch/sparc/include/asm/thread_info_64.h @@ -0,0 +1,281 @@ +/* thread_info.h: sparc64 low-level thread information + * + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#ifdef __KERNEL__ + +#define NSWINS 7 + +#define TI_FLAG_BYTE_FAULT_CODE 0 +#define TI_FLAG_FAULT_CODE_SHIFT 56 +#define TI_FLAG_BYTE_WSTATE 1 +#define TI_FLAG_WSTATE_SHIFT 48 +#define TI_FLAG_BYTE_CWP 2 +#define TI_FLAG_CWP_SHIFT 40 +#define TI_FLAG_BYTE_CURRENT_DS 3 +#define TI_FLAG_CURRENT_DS_SHIFT 32 +#define TI_FLAG_BYTE_FPDEPTH 4 +#define TI_FLAG_FPDEPTH_SHIFT 24 +#define TI_FLAG_BYTE_WSAVED 5 +#define TI_FLAG_WSAVED_SHIFT 16 + +#include <asm/page.h> + +#ifndef __ASSEMBLY__ + +#include <asm/ptrace.h> +#include <asm/types.h> + +struct task_struct; +struct exec_domain; + +struct thread_info { + /* D$ line 1 */ + struct task_struct *task; + unsigned long flags; + __u8 fpsaved[7]; + __u8 status; + unsigned long ksp; + + /* D$ line 2 */ + unsigned long fault_address; + struct pt_regs *kregs; + struct exec_domain *exec_domain; + int preempt_count; /* 0 => preemptable, <0 => BUG */ + __u8 new_child; + __u8 syscall_noerror; + __u16 cpu; + + unsigned long *utraps; + + struct reg_window reg_window[NSWINS]; + unsigned long rwbuf_stkptrs[NSWINS]; + + unsigned long gsr[7]; + unsigned long xfsr[7]; + + __u64 __user *user_cntd0; + __u64 __user *user_cntd1; + __u64 kernel_cntd0, kernel_cntd1; + __u64 pcr_reg; + + struct restart_block restart_block; + + struct pt_regs *kern_una_regs; + unsigned int kern_una_insn; + + unsigned long fpregs[0] __attribute__ ((aligned(64))); +}; + +#endif /* !(__ASSEMBLY__) */ + +/* offsets into the thread_info struct for assembly code access */ +#define TI_TASK 0x00000000 +#define TI_FLAGS 0x00000008 +#define TI_FAULT_CODE (TI_FLAGS + TI_FLAG_BYTE_FAULT_CODE) +#define TI_WSTATE (TI_FLAGS + TI_FLAG_BYTE_WSTATE) +#define TI_CWP (TI_FLAGS + TI_FLAG_BYTE_CWP) +#define TI_CURRENT_DS (TI_FLAGS + TI_FLAG_BYTE_CURRENT_DS) +#define TI_FPDEPTH (TI_FLAGS + TI_FLAG_BYTE_FPDEPTH) +#define TI_WSAVED (TI_FLAGS + TI_FLAG_BYTE_WSAVED) +#define TI_FPSAVED 0x00000010 +#define TI_KSP 0x00000018 +#define TI_FAULT_ADDR 0x00000020 +#define TI_KREGS 0x00000028 +#define TI_EXEC_DOMAIN 0x00000030 +#define TI_PRE_COUNT 0x00000038 +#define TI_NEW_CHILD 0x0000003c +#define TI_SYS_NOERROR 0x0000003d +#define TI_CPU 0x0000003e +#define TI_UTRAPS 0x00000040 +#define TI_REG_WINDOW 0x00000048 +#define TI_RWIN_SPTRS 0x000003c8 +#define TI_GSR 0x00000400 +#define TI_XFSR 0x00000438 +#define TI_USER_CNTD0 0x00000470 +#define TI_USER_CNTD1 0x00000478 +#define TI_KERN_CNTD0 0x00000480 +#define TI_KERN_CNTD1 0x00000488 +#define TI_PCR 0x00000490 +#define TI_RESTART_BLOCK 0x00000498 +#define TI_KUNA_REGS 0x000004c0 +#define TI_KUNA_INSN 0x000004c8 +#define TI_FPREGS 0x00000500 + +/* We embed this in the uppermost byte of thread_info->flags */ +#define FAULT_CODE_WRITE 0x01 /* Write access, implies D-TLB */ +#define FAULT_CODE_DTLB 0x02 /* Miss happened in D-TLB */ +#define FAULT_CODE_ITLB 0x04 /* Miss happened in I-TLB */ +#define FAULT_CODE_WINFIXUP 0x08 /* Miss happened during spill/fill */ +#define FAULT_CODE_BLKCOMMIT 0x10 /* Use blk-commit ASI in copy_page */ + +#if PAGE_SHIFT == 13 +#define THREAD_SIZE (2*PAGE_SIZE) +#define THREAD_SHIFT (PAGE_SHIFT + 1) +#else /* PAGE_SHIFT == 13 */ +#define THREAD_SIZE PAGE_SIZE +#define THREAD_SHIFT PAGE_SHIFT +#endif /* PAGE_SHIFT == 13 */ + +#define PREEMPT_ACTIVE 0x4000000 + +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#ifndef __ASSEMBLY__ + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .flags = ((unsigned long)ASI_P) << TI_FLAG_CURRENT_DS_SHIFT, \ + .exec_domain = &default_exec_domain, \ + .preempt_count = 1, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* how to get the thread information struct from C */ +register struct thread_info *current_thread_info_reg asm("g6"); +#define current_thread_info() (current_thread_info_reg) + +/* thread information allocation */ +#if PAGE_SHIFT == 13 +#define __THREAD_INFO_ORDER 1 +#else /* PAGE_SHIFT == 13 */ +#define __THREAD_INFO_ORDER 0 +#endif /* PAGE_SHIFT == 13 */ + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(tsk) \ +({ \ + struct thread_info *ret; \ + \ + ret = (struct thread_info *) \ + __get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER); \ + if (ret) \ + memset(ret, 0, PAGE_SIZE<<__THREAD_INFO_ORDER); \ + ret; \ +}) +#else +#define alloc_thread_info(tsk) \ + ((struct thread_info *)__get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER)) +#endif + +#define free_thread_info(ti) \ + free_pages((unsigned long)(ti),__THREAD_INFO_ORDER) + +#define __thread_flag_byte_ptr(ti) \ + ((unsigned char *)(&((ti)->flags))) +#define __cur_thread_flag_byte_ptr __thread_flag_byte_ptr(current_thread_info()) + +#define get_thread_fault_code() (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE]) +#define set_thread_fault_code(val) (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE] = (val)) +#define get_thread_wstate() (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE]) +#define set_thread_wstate(val) (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE] = (val)) +#define get_thread_cwp() (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP]) +#define set_thread_cwp(val) (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP] = (val)) +#define get_thread_current_ds() (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS]) +#define set_thread_current_ds(val) (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS] = (val)) +#define get_thread_fpdepth() (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH]) +#define set_thread_fpdepth(val) (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH] = (val)) +#define get_thread_wsaved() (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED]) +#define set_thread_wsaved(val) (__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED] = (val)) + +#endif /* !(__ASSEMBLY__) */ + +/* + * Thread information flags, only 16 bits are available as we encode + * other values into the upper 6 bytes. + * + * On trap return we need to test several values: + * + * user: need_resched, notify_resume, sigpending, wsaved, perfctr + * kernel: fpdepth + * + * So to check for work in the kernel case we simply load the fpdepth + * byte out of the flags and test it. For the user case we encode the + * lower 3 bytes of flags as follows: + * ---------------------------------------- + * | wsaved | flags byte 1 | flags byte 2 | + * ---------------------------------------- + * This optimizes the user test into: + * ldx [%g6 + TI_FLAGS], REG1 + * sethi %hi(_TIF_USER_WORK_MASK), REG2 + * or REG2, %lo(_TIF_USER_WORK_MASK), REG2 + * andcc REG1, REG2, %g0 + * be,pt no_work_to_do + * nop + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_PERFCTR 4 /* performance counters active */ +#define TIF_UNALIGNED 5 /* allowed to do unaligned accesses */ +/* flag bit 6 is available */ +#define TIF_32BIT 7 /* 32-bit binary */ +/* flag bit 8 is available */ +#define TIF_SECCOMP 9 /* secure computing */ +#define TIF_SYSCALL_AUDIT 10 /* syscall auditing active */ +/* flag bit 11 is available */ +/* NOTE: Thread flags >= 12 should be ones we have no interest + * in using in assembly, else we can't use the mask as + * an immediate value in instructions such as andcc. + */ +#define TIF_ABI_PENDING 12 +#define TIF_MEMDIE 13 +#define TIF_POLLING_NRFLAG 14 + +#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) +#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) +#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) +#define _TIF_PERFCTR (1<<TIF_PERFCTR) +#define _TIF_UNALIGNED (1<<TIF_UNALIGNED) +#define _TIF_32BIT (1<<TIF_32BIT) +#define _TIF_SECCOMP (1<<TIF_SECCOMP) +#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT) +#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING) +#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) + +#define _TIF_USER_WORK_MASK ((0xff << TI_FLAG_WSAVED_SHIFT) | \ + _TIF_DO_NOTIFY_RESUME_MASK | \ + _TIF_NEED_RESCHED | _TIF_PERFCTR) +#define _TIF_DO_NOTIFY_RESUME_MASK (_TIF_NOTIFY_RESUME | _TIF_SIGPENDING) + +/* + * Thread-synchronous status. + * + * This is different from the flags in that nobody else + * ever touches our thread-synchronous status, so we don't + * have to worry about atomic accesses. + * + * Note that there are only 8 bits available. + */ +#define TS_RESTORE_SIGMASK 0x0001 /* restore signal mask in do_signal() */ + +#ifndef __ASSEMBLY__ +#define HAVE_SET_RESTORE_SIGMASK 1 +static inline void set_restore_sigmask(void) +{ + struct thread_info *ti = current_thread_info(); + ti->status |= TS_RESTORE_SIGMASK; + set_bit(TIF_SIGPENDING, &ti->flags); +} +#endif /* !__ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_THREAD_INFO_H */ diff --git a/arch/sparc/include/asm/timer.h b/arch/sparc/include/asm/timer.h new file mode 100644 index 00000000000..612fd2779d9 --- /dev/null +++ b/arch/sparc/include/asm/timer.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_TIMER_H +#define ___ASM_SPARC_TIMER_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/timer_64.h> +#else +#include <asm/timer_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/timer_32.h b/arch/sparc/include/asm/timer_32.h new file mode 100644 index 00000000000..361e53898dd --- /dev/null +++ b/arch/sparc/include/asm/timer_32.h @@ -0,0 +1,107 @@ +/* + * timer.h: Definitions for the timer chips on the Sparc. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + + +#ifndef _SPARC_TIMER_H +#define _SPARC_TIMER_H + +#include <asm/system.h> /* For SUN4M_NCPUS */ +#include <asm/sun4paddr.h> +#include <asm/btfixup.h> + +/* Timer structures. The interrupt timer has two properties which + * are the counter (which is handled in do_timer in sched.c) and the limit. + * This limit is where the timer's counter 'wraps' around. Oddly enough, + * the sun4c timer when it hits the limit wraps back to 1 and not zero + * thus when calculating the value at which it will fire a microsecond you + * must adjust by one. Thanks SUN for designing such great hardware ;( + */ + +/* Note that I am only going to use the timer that interrupts at + * Sparc IRQ 10. There is another one available that can fire at + * IRQ 14. Currently it is left untouched, we keep the PROM's limit + * register value and let the prom take these interrupts. This allows + * L1-A to work. + */ + +struct sun4c_timer_info { + __volatile__ unsigned int cur_count10; + __volatile__ unsigned int timer_limit10; + __volatile__ unsigned int cur_count14; + __volatile__ unsigned int timer_limit14; +}; + +#define SUN4C_TIMER_PHYSADDR 0xf3000000 +#ifdef CONFIG_SUN4 +#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR +#else +#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR +#endif + +/* A sun4m has two blocks of registers which are probably of the same + * structure. LSI Logic's L64851 is told to _decrement_ from the limit + * value. Aurora behaves similarly but its limit value is compacted in + * other fashion (it's wider). Documented fields are defined here. + */ + +/* As with the interrupt register, we have two classes of timer registers + * which are per-cpu and master. Per-cpu timers only hit that cpu and are + * only level 14 ticks, master timer hits all cpus and is level 10. + */ + +#define SUN4M_PRM_CNT_L 0x80000000 +#define SUN4M_PRM_CNT_LVALUE 0x7FFFFC00 + +struct sun4m_timer_percpu_info { + __volatile__ unsigned int l14_timer_limit; /* Initial value is 0x009c4000 */ + __volatile__ unsigned int l14_cur_count; + + /* This register appears to be write only and/or inaccessible + * on Uni-Processor sun4m machines. + */ + __volatile__ unsigned int l14_limit_noclear; /* Data access error is here */ + + __volatile__ unsigned int cntrl; /* =1 after POST on Aurora */ + __volatile__ unsigned char space[PAGE_SIZE - 16]; +}; + +struct sun4m_timer_regs { + struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS]; + volatile unsigned int l10_timer_limit; + volatile unsigned int l10_cur_count; + + /* Again, this appears to be write only and/or inaccessible + * on uni-processor sun4m machines. + */ + volatile unsigned int l10_limit_noclear; + + /* This register too, it must be magic. */ + volatile unsigned int foobar; + + volatile unsigned int cfg; /* equals zero at boot time... */ +}; + +#define SUN4D_PRM_CNT_L 0x80000000 +#define SUN4D_PRM_CNT_LVALUE 0x7FFFFC00 + +struct sun4d_timer_regs { + volatile unsigned int l10_timer_limit; + volatile unsigned int l10_cur_countx; + volatile unsigned int l10_limit_noclear; + volatile unsigned int ctrl; + volatile unsigned int l10_cur_count; +}; + +extern struct sun4d_timer_regs *sun4d_timers; + +extern __volatile__ unsigned int *master_l10_counter; +extern __volatile__ unsigned int *master_l10_limit; + +/* FIXME: Make do_[gs]ettimeofday btfixup calls */ +BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv) +#define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv) + +#endif /* !(_SPARC_TIMER_H) */ diff --git a/arch/sparc/include/asm/timer_64.h b/arch/sparc/include/asm/timer_64.h new file mode 100644 index 00000000000..5b779fd1f78 --- /dev/null +++ b/arch/sparc/include/asm/timer_64.h @@ -0,0 +1,30 @@ +/* timer.h: System timer definitions for sun5. + * + * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net) + */ + +#ifndef _SPARC64_TIMER_H +#define _SPARC64_TIMER_H + +#include <linux/types.h> +#include <linux/init.h> + +struct sparc64_tick_ops { + unsigned long (*get_tick)(void); + int (*add_compare)(unsigned long); + unsigned long softint_mask; + void (*disable_irq)(void); + + void (*init_tick)(void); + unsigned long (*add_tick)(unsigned long); + + char *name; +}; + +extern struct sparc64_tick_ops *tick_ops; + +extern unsigned long sparc64_get_clock_tick(unsigned int cpu); +extern void __devinit setup_sparc64_timer(void); +extern void __init time_init(void); + +#endif /* _SPARC64_TIMER_H */ diff --git a/arch/sparc/include/asm/timex.h b/arch/sparc/include/asm/timex.h new file mode 100644 index 00000000000..70cc37b7382 --- /dev/null +++ b/arch/sparc/include/asm/timex.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_TIMEX_H +#define ___ASM_SPARC_TIMEX_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/timex_64.h> +#else +#include <asm/timex_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/timex_32.h b/arch/sparc/include/asm/timex_32.h new file mode 100644 index 00000000000..b6ccdb0d6f7 --- /dev/null +++ b/arch/sparc/include/asm/timex_32.h @@ -0,0 +1,15 @@ +/* + * linux/include/asm/timex.h + * + * sparc architecture timex specifications + */ +#ifndef _ASMsparc_TIMEX_H +#define _ASMsparc_TIMEX_H + +#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ + +/* XXX Maybe do something better at some point... -DaveM */ +typedef unsigned long cycles_t; +#define get_cycles() (0) + +#endif diff --git a/arch/sparc/include/asm/timex_64.h b/arch/sparc/include/asm/timex_64.h new file mode 100644 index 00000000000..18b30bc9823 --- /dev/null +++ b/arch/sparc/include/asm/timex_64.h @@ -0,0 +1,19 @@ +/* + * linux/include/asm/timex.h + * + * sparc64 architecture timex specifications + */ +#ifndef _ASMsparc64_TIMEX_H +#define _ASMsparc64_TIMEX_H + +#include <asm/timer.h> + +#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ + +/* Getting on the cycle counter on sparc64. */ +typedef unsigned long cycles_t; +#define get_cycles() tick_ops->get_tick() + +#define ARCH_HAS_READ_CURRENT_TIMER + +#endif diff --git a/arch/sparc/include/asm/tlb.h b/arch/sparc/include/asm/tlb.h new file mode 100644 index 00000000000..92d0393bbcd --- /dev/null +++ b/arch/sparc/include/asm/tlb.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_TLB_H +#define ___ASM_SPARC_TLB_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/tlb_64.h> +#else +#include <asm/tlb_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/tlb_32.h b/arch/sparc/include/asm/tlb_32.h new file mode 100644 index 00000000000..6d02d1ce53f --- /dev/null +++ b/arch/sparc/include/asm/tlb_32.h @@ -0,0 +1,24 @@ +#ifndef _SPARC_TLB_H +#define _SPARC_TLB_H + +#define tlb_start_vma(tlb, vma) \ +do { \ + flush_cache_range(vma, vma->vm_start, vma->vm_end); \ +} while (0) + +#define tlb_end_vma(tlb, vma) \ +do { \ + flush_tlb_range(vma, vma->vm_start, vma->vm_end); \ +} while (0) + +#define __tlb_remove_tlb_entry(tlb, pte, address) \ + do { } while (0) + +#define tlb_flush(tlb) \ +do { \ + flush_tlb_mm((tlb)->mm); \ +} while (0) + +#include <asm-generic/tlb.h> + +#endif /* _SPARC_TLB_H */ diff --git a/arch/sparc/include/asm/tlb_64.h b/arch/sparc/include/asm/tlb_64.h new file mode 100644 index 00000000000..ec81cdedef2 --- /dev/null +++ b/arch/sparc/include/asm/tlb_64.h @@ -0,0 +1,111 @@ +#ifndef _SPARC64_TLB_H +#define _SPARC64_TLB_H + +#include <linux/swap.h> +#include <linux/pagemap.h> +#include <asm/pgalloc.h> +#include <asm/tlbflush.h> +#include <asm/mmu_context.h> + +#define TLB_BATCH_NR 192 + +/* + * For UP we don't need to worry about TLB flush + * and page free order so much.. + */ +#ifdef CONFIG_SMP + #define FREE_PTE_NR 506 + #define tlb_fast_mode(bp) ((bp)->pages_nr == ~0U) +#else + #define FREE_PTE_NR 1 + #define tlb_fast_mode(bp) 1 +#endif + +struct mmu_gather { + struct mm_struct *mm; + unsigned int pages_nr; + unsigned int need_flush; + unsigned int fullmm; + unsigned int tlb_nr; + unsigned long vaddrs[TLB_BATCH_NR]; + struct page *pages[FREE_PTE_NR]; +}; + +DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); + +#ifdef CONFIG_SMP +extern void smp_flush_tlb_pending(struct mm_struct *, + unsigned long, unsigned long *); +#endif + +extern void __flush_tlb_pending(unsigned long, unsigned long, unsigned long *); +extern void flush_tlb_pending(void); + +static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) +{ + struct mmu_gather *mp = &get_cpu_var(mmu_gathers); + + BUG_ON(mp->tlb_nr); + + mp->mm = mm; + mp->pages_nr = num_online_cpus() > 1 ? 0U : ~0U; + mp->fullmm = full_mm_flush; + + return mp; +} + + +static inline void tlb_flush_mmu(struct mmu_gather *mp) +{ + if (mp->need_flush) { + free_pages_and_swap_cache(mp->pages, mp->pages_nr); + mp->pages_nr = 0; + mp->need_flush = 0; + } + +} + +#ifdef CONFIG_SMP +extern void smp_flush_tlb_mm(struct mm_struct *mm); +#define do_flush_tlb_mm(mm) smp_flush_tlb_mm(mm) +#else +#define do_flush_tlb_mm(mm) __flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT) +#endif + +static inline void tlb_finish_mmu(struct mmu_gather *mp, unsigned long start, unsigned long end) +{ + tlb_flush_mmu(mp); + + if (mp->fullmm) + mp->fullmm = 0; + else + flush_tlb_pending(); + + /* keep the page table cache within bounds */ + check_pgt_cache(); + + put_cpu_var(mmu_gathers); +} + +static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page) +{ + if (tlb_fast_mode(mp)) { + free_page_and_swap_cache(page); + return; + } + mp->need_flush = 1; + mp->pages[mp->pages_nr++] = page; + if (mp->pages_nr >= FREE_PTE_NR) + tlb_flush_mmu(mp); +} + +#define tlb_remove_tlb_entry(mp,ptep,addr) do { } while (0) +#define pte_free_tlb(mp, ptepage) pte_free((mp)->mm, ptepage) +#define pmd_free_tlb(mp, pmdp) pmd_free((mp)->mm, pmdp) +#define pud_free_tlb(tlb,pudp) __pud_free_tlb(tlb,pudp) + +#define tlb_migrate_finish(mm) do { } while (0) +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) + +#endif /* _SPARC64_TLB_H */ diff --git a/arch/sparc/include/asm/tlbflush.h b/arch/sparc/include/asm/tlbflush.h new file mode 100644 index 00000000000..2c9629fad1e --- /dev/null +++ b/arch/sparc/include/asm/tlbflush.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_TLBFLUSH_H +#define ___ASM_SPARC_TLBFLUSH_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/tlbflush_64.h> +#else +#include <asm/tlbflush_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/tlbflush_32.h b/arch/sparc/include/asm/tlbflush_32.h new file mode 100644 index 00000000000..fe0a71abc9b --- /dev/null +++ b/arch/sparc/include/asm/tlbflush_32.h @@ -0,0 +1,60 @@ +#ifndef _SPARC_TLBFLUSH_H +#define _SPARC_TLBFLUSH_H + +#include <linux/mm.h> +// #include <asm/processor.h> + +/* + * TLB flushing: + * + * - flush_tlb() flushes the current mm struct TLBs XXX Exists? + * - flush_tlb_all() flushes all processes TLBs + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_range(vma, start, end) flushes a range of pages + * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages + */ + +#ifdef CONFIG_SMP + +BTFIXUPDEF_CALL(void, local_flush_tlb_all, void) +BTFIXUPDEF_CALL(void, local_flush_tlb_mm, struct mm_struct *) +BTFIXUPDEF_CALL(void, local_flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long) +BTFIXUPDEF_CALL(void, local_flush_tlb_page, struct vm_area_struct *, unsigned long) + +#define local_flush_tlb_all() BTFIXUP_CALL(local_flush_tlb_all)() +#define local_flush_tlb_mm(mm) BTFIXUP_CALL(local_flush_tlb_mm)(mm) +#define local_flush_tlb_range(vma,start,end) BTFIXUP_CALL(local_flush_tlb_range)(vma,start,end) +#define local_flush_tlb_page(vma,addr) BTFIXUP_CALL(local_flush_tlb_page)(vma,addr) + +extern void smp_flush_tlb_all(void); +extern void smp_flush_tlb_mm(struct mm_struct *mm); +extern void smp_flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, + unsigned long end); +extern void smp_flush_tlb_page(struct vm_area_struct *mm, unsigned long page); + +#endif /* CONFIG_SMP */ + +BTFIXUPDEF_CALL(void, flush_tlb_all, void) +BTFIXUPDEF_CALL(void, flush_tlb_mm, struct mm_struct *) +BTFIXUPDEF_CALL(void, flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long) +BTFIXUPDEF_CALL(void, flush_tlb_page, struct vm_area_struct *, unsigned long) + +#define flush_tlb_all() BTFIXUP_CALL(flush_tlb_all)() +#define flush_tlb_mm(mm) BTFIXUP_CALL(flush_tlb_mm)(mm) +#define flush_tlb_range(vma,start,end) BTFIXUP_CALL(flush_tlb_range)(vma,start,end) +#define flush_tlb_page(vma,addr) BTFIXUP_CALL(flush_tlb_page)(vma,addr) + +// #define flush_tlb() flush_tlb_mm(current->active_mm) /* XXX Sure? */ + +/* + * This is a kludge, until I know better. --zaitcev XXX + */ +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ + flush_tlb_all(); +} + +#endif /* _SPARC_TLBFLUSH_H */ diff --git a/arch/sparc/include/asm/tlbflush_64.h b/arch/sparc/include/asm/tlbflush_64.h new file mode 100644 index 00000000000..fbb675dbe0c --- /dev/null +++ b/arch/sparc/include/asm/tlbflush_64.h @@ -0,0 +1,44 @@ +#ifndef _SPARC64_TLBFLUSH_H +#define _SPARC64_TLBFLUSH_H + +#include <linux/mm.h> +#include <asm/mmu_context.h> + +/* TSB flush operations. */ +struct mmu_gather; +extern void flush_tsb_kernel_range(unsigned long start, unsigned long end); +extern void flush_tsb_user(struct mmu_gather *mp); + +/* TLB flush operations. */ + +extern void flush_tlb_pending(void); + +#define flush_tlb_range(vma,start,end) \ + do { (void)(start); flush_tlb_pending(); } while (0) +#define flush_tlb_page(vma,addr) flush_tlb_pending() +#define flush_tlb_mm(mm) flush_tlb_pending() + +/* Local cpu only. */ +extern void __flush_tlb_all(void); + +extern void __flush_tlb_kernel_range(unsigned long start, unsigned long end); + +#ifndef CONFIG_SMP + +#define flush_tlb_kernel_range(start,end) \ +do { flush_tsb_kernel_range(start,end); \ + __flush_tlb_kernel_range(start,end); \ +} while (0) + +#else /* CONFIG_SMP */ + +extern void smp_flush_tlb_kernel_range(unsigned long start, unsigned long end); + +#define flush_tlb_kernel_range(start, end) \ +do { flush_tsb_kernel_range(start,end); \ + smp_flush_tlb_kernel_range(start, end); \ +} while (0) + +#endif /* ! CONFIG_SMP */ + +#endif /* _SPARC64_TLBFLUSH_H */ diff --git a/arch/sparc/include/asm/topology.h b/arch/sparc/include/asm/topology.h new file mode 100644 index 00000000000..ee4f191d394 --- /dev/null +++ b/arch/sparc/include/asm/topology.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_TOPOLOGY_H +#define ___ASM_SPARC_TOPOLOGY_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/topology_64.h> +#else +#include <asm/topology_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/topology_32.h b/arch/sparc/include/asm/topology_32.h new file mode 100644 index 00000000000..ee5ac9c9da2 --- /dev/null +++ b/arch/sparc/include/asm/topology_32.h @@ -0,0 +1,6 @@ +#ifndef _ASM_SPARC_TOPOLOGY_H +#define _ASM_SPARC_TOPOLOGY_H + +#include <asm-generic/topology.h> + +#endif /* _ASM_SPARC_TOPOLOGY_H */ diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h new file mode 100644 index 00000000000..001c04027c8 --- /dev/null +++ b/arch/sparc/include/asm/topology_64.h @@ -0,0 +1,86 @@ +#ifndef _ASM_SPARC64_TOPOLOGY_H +#define _ASM_SPARC64_TOPOLOGY_H + +#ifdef CONFIG_NUMA + +#include <asm/mmzone.h> + +static inline int cpu_to_node(int cpu) +{ + return numa_cpu_lookup_table[cpu]; +} + +#define parent_node(node) (node) + +static inline cpumask_t node_to_cpumask(int node) +{ + return numa_cpumask_lookup_table[node]; +} + +/* Returns a pointer to the cpumask of CPUs on Node 'node'. */ +#define node_to_cpumask_ptr(v, node) \ + cpumask_t *v = &(numa_cpumask_lookup_table[node]) + +#define node_to_cpumask_ptr_next(v, node) \ + v = &(numa_cpumask_lookup_table[node]) + +static inline int node_to_first_cpu(int node) +{ + cpumask_t tmp; + tmp = node_to_cpumask(node); + return first_cpu(tmp); +} + +struct pci_bus; +#ifdef CONFIG_PCI +extern int pcibus_to_node(struct pci_bus *pbus); +#else +static inline int pcibus_to_node(struct pci_bus *pbus) +{ + return -1; +} +#endif + +#define pcibus_to_cpumask(bus) \ + (pcibus_to_node(bus) == -1 ? \ + CPU_MASK_ALL : \ + node_to_cpumask(pcibus_to_node(bus))) + +#define SD_NODE_INIT (struct sched_domain) { \ + .min_interval = 8, \ + .max_interval = 32, \ + .busy_factor = 32, \ + .imbalance_pct = 125, \ + .cache_nice_tries = 2, \ + .busy_idx = 3, \ + .idle_idx = 2, \ + .newidle_idx = 0, \ + .wake_idx = 1, \ + .forkexec_idx = 1, \ + .flags = SD_LOAD_BALANCE \ + | SD_BALANCE_FORK \ + | SD_BALANCE_EXEC \ + | SD_SERIALIZE \ + | SD_WAKE_BALANCE, \ + .last_balance = jiffies, \ + .balance_interval = 1, \ +} + +#else /* CONFIG_NUMA */ + +#include <asm-generic/topology.h> + +#endif /* !(CONFIG_NUMA) */ + +#ifdef CONFIG_SMP +#define topology_physical_package_id(cpu) (cpu_data(cpu).proc_id) +#define topology_core_id(cpu) (cpu_data(cpu).core_id) +#define topology_core_siblings(cpu) (cpu_core_map[cpu]) +#define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu)) +#define mc_capable() (sparc64_multi_core) +#define smt_capable() (sparc64_multi_core) +#endif /* CONFIG_SMP */ + +#define cpu_coregroup_map(cpu) (cpu_core_map[cpu]) + +#endif /* _ASM_SPARC64_TOPOLOGY_H */ diff --git a/arch/sparc/include/asm/traps.h b/arch/sparc/include/asm/traps.h new file mode 100644 index 00000000000..bebdbf8f43a --- /dev/null +++ b/arch/sparc/include/asm/traps.h @@ -0,0 +1,140 @@ +/* + * traps.h: Format of entries for the Sparc trap table. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_TRAPS_H +#define _SPARC_TRAPS_H + +#define NUM_SPARC_TRAPS 255 + +#ifndef __ASSEMBLY__ + +/* This is for V8 compliant Sparc CPUS */ +struct tt_entry { + unsigned long inst_one; + unsigned long inst_two; + unsigned long inst_three; + unsigned long inst_four; +}; + +/* We set this to _start in system setup. */ +extern struct tt_entry *sparc_ttable; + +static inline unsigned long get_tbr(void) +{ + unsigned long tbr; + + __asm__ __volatile__("rd %%tbr, %0\n\t" : "=r" (tbr)); + return tbr; +} + +#endif /* !(__ASSEMBLY__) */ + +/* For patching the trap table at boot time, we need to know how to + * form various common Sparc instructions. Thus these macros... + */ + +#define SPARC_MOV_CONST_L3(const) (0xa6102000 | (const&0xfff)) + +/* The following assumes that the branch lies before the place we + * are branching to. This is the case for a trap vector... + * You have been warned. + */ +#define SPARC_BRANCH(dest_addr, inst_addr) \ + (0x10800000 | (((dest_addr-inst_addr)>>2)&0x3fffff)) + +#define SPARC_RD_PSR_L0 (0xa1480000) +#define SPARC_RD_WIM_L3 (0xa7500000) +#define SPARC_NOP (0x01000000) + +/* Various interesting trap levels. */ +/* First, hardware traps. */ +#define SP_TRAP_TFLT 0x1 /* Text fault */ +#define SP_TRAP_II 0x2 /* Illegal Instruction */ +#define SP_TRAP_PI 0x3 /* Privileged Instruction */ +#define SP_TRAP_FPD 0x4 /* Floating Point Disabled */ +#define SP_TRAP_WOVF 0x5 /* Window Overflow */ +#define SP_TRAP_WUNF 0x6 /* Window Underflow */ +#define SP_TRAP_MNA 0x7 /* Memory Address Unaligned */ +#define SP_TRAP_FPE 0x8 /* Floating Point Exception */ +#define SP_TRAP_DFLT 0x9 /* Data Fault */ +#define SP_TRAP_TOF 0xa /* Tag Overflow */ +#define SP_TRAP_WDOG 0xb /* Watchpoint Detected */ +#define SP_TRAP_IRQ1 0x11 /* IRQ level 1 */ +#define SP_TRAP_IRQ2 0x12 /* IRQ level 2 */ +#define SP_TRAP_IRQ3 0x13 /* IRQ level 3 */ +#define SP_TRAP_IRQ4 0x14 /* IRQ level 4 */ +#define SP_TRAP_IRQ5 0x15 /* IRQ level 5 */ +#define SP_TRAP_IRQ6 0x16 /* IRQ level 6 */ +#define SP_TRAP_IRQ7 0x17 /* IRQ level 7 */ +#define SP_TRAP_IRQ8 0x18 /* IRQ level 8 */ +#define SP_TRAP_IRQ9 0x19 /* IRQ level 9 */ +#define SP_TRAP_IRQ10 0x1a /* IRQ level 10 */ +#define SP_TRAP_IRQ11 0x1b /* IRQ level 11 */ +#define SP_TRAP_IRQ12 0x1c /* IRQ level 12 */ +#define SP_TRAP_IRQ13 0x1d /* IRQ level 13 */ +#define SP_TRAP_IRQ14 0x1e /* IRQ level 14 */ +#define SP_TRAP_IRQ15 0x1f /* IRQ level 15 Non-maskable */ +#define SP_TRAP_RACC 0x20 /* Register Access Error ??? */ +#define SP_TRAP_IACC 0x21 /* Instruction Access Error */ +#define SP_TRAP_CPDIS 0x24 /* Co-Processor Disabled */ +#define SP_TRAP_BADFL 0x25 /* Unimplemented Flush Instruction */ +#define SP_TRAP_CPEXP 0x28 /* Co-Processor Exception */ +#define SP_TRAP_DACC 0x29 /* Data Access Error */ +#define SP_TRAP_DIVZ 0x2a /* Divide By Zero */ +#define SP_TRAP_DSTORE 0x2b /* Data Store Error ??? */ +#define SP_TRAP_DMM 0x2c /* Data Access MMU Miss ??? */ +#define SP_TRAP_IMM 0x3c /* Instruction Access MMU Miss ??? */ + +/* Now the Software Traps... */ +#define SP_TRAP_SUNOS 0x80 /* SunOS System Call */ +#define SP_TRAP_SBPT 0x81 /* Software Breakpoint */ +#define SP_TRAP_SDIVZ 0x82 /* Software Divide-by-Zero trap */ +#define SP_TRAP_FWIN 0x83 /* Flush Windows */ +#define SP_TRAP_CWIN 0x84 /* Clean Windows */ +#define SP_TRAP_RCHK 0x85 /* Range Check */ +#define SP_TRAP_FUNA 0x86 /* Fix Unaligned Access */ +#define SP_TRAP_IOWFL 0x87 /* Integer Overflow */ +#define SP_TRAP_SOLARIS 0x88 /* Solaris System Call */ +#define SP_TRAP_NETBSD 0x89 /* NetBSD System Call */ +#define SP_TRAP_LINUX 0x90 /* Linux System Call */ + +/* Names used for compatibility with SunOS */ +#define ST_SYSCALL 0x00 +#define ST_BREAKPOINT 0x01 +#define ST_DIV0 0x02 +#define ST_FLUSH_WINDOWS 0x03 +#define ST_CLEAN_WINDOWS 0x04 +#define ST_RANGE_CHECK 0x05 +#define ST_FIX_ALIGN 0x06 +#define ST_INT_OVERFLOW 0x07 + +/* Special traps... */ +#define SP_TRAP_KBPT1 0xfe /* KADB/PROM Breakpoint one */ +#define SP_TRAP_KBPT2 0xff /* KADB/PROM Breakpoint two */ + +/* Handy Macros */ +/* Is this a trap we never expect to get? */ +#define BAD_TRAP_P(level) \ + ((level > SP_TRAP_WDOG && level < SP_TRAP_IRQ1) || \ + (level > SP_TRAP_IACC && level < SP_TRAP_CPDIS) || \ + (level > SP_TRAP_BADFL && level < SP_TRAP_CPEXP) || \ + (level > SP_TRAP_DMM && level < SP_TRAP_IMM) || \ + (level > SP_TRAP_IMM && level < SP_TRAP_SUNOS) || \ + (level > SP_TRAP_LINUX && level < SP_TRAP_KBPT1)) + +/* Is this a Hardware trap? */ +#define HW_TRAP_P(level) ((level > 0) && (level < SP_TRAP_SUNOS)) + +/* Is this a Software trap? */ +#define SW_TRAP_P(level) ((level >= SP_TRAP_SUNOS) && (level <= SP_TRAP_KBPT2)) + +/* Is this a system call for some OS we know about? */ +#define SCALL_TRAP_P(level) ((level == SP_TRAP_SUNOS) || \ + (level == SP_TRAP_SOLARIS) || \ + (level == SP_TRAP_NETBSD) || \ + (level == SP_TRAP_LINUX)) + +#endif /* !(_SPARC_TRAPS_H) */ diff --git a/arch/sparc/include/asm/tsb.h b/arch/sparc/include/asm/tsb.h new file mode 100644 index 00000000000..76e4299dd9b --- /dev/null +++ b/arch/sparc/include/asm/tsb.h @@ -0,0 +1,283 @@ +#ifndef _SPARC64_TSB_H +#define _SPARC64_TSB_H + +/* The sparc64 TSB is similar to the powerpc hashtables. It's a + * power-of-2 sized table of TAG/PTE pairs. The cpu precomputes + * pointers into this table for 8K and 64K page sizes, and also a + * comparison TAG based upon the virtual address and context which + * faults. + * + * TLB miss trap handler software does the actual lookup via something + * of the form: + * + * ldxa [%g0] ASI_{D,I}MMU_TSB_8KB_PTR, %g1 + * ldxa [%g0] ASI_{D,I}MMU, %g6 + * sllx %g6, 22, %g6 + * srlx %g6, 22, %g6 + * ldda [%g1] ASI_NUCLEUS_QUAD_LDD, %g4 + * cmp %g4, %g6 + * bne,pn %xcc, tsb_miss_{d,i}tlb + * mov FAULT_CODE_{D,I}TLB, %g3 + * stxa %g5, [%g0] ASI_{D,I}TLB_DATA_IN + * retry + * + * + * Each 16-byte slot of the TSB is the 8-byte tag and then the 8-byte + * PTE. The TAG is of the same layout as the TLB TAG TARGET mmu + * register which is: + * + * ------------------------------------------------- + * | - | CONTEXT | - | VADDR bits 63:22 | + * ------------------------------------------------- + * 63 61 60 48 47 42 41 0 + * + * But actually, since we use per-mm TSB's, we zero out the CONTEXT + * field. + * + * Like the powerpc hashtables we need to use locking in order to + * synchronize while we update the entries. PTE updates need locking + * as well. + * + * We need to carefully choose a lock bits for the TSB entry. We + * choose to use bit 47 in the tag. Also, since we never map anything + * at page zero in context zero, we use zero as an invalid tag entry. + * When the lock bit is set, this forces a tag comparison failure. + */ + +#define TSB_TAG_LOCK_BIT 47 +#define TSB_TAG_LOCK_HIGH (1 << (TSB_TAG_LOCK_BIT - 32)) + +#define TSB_TAG_INVALID_BIT 46 +#define TSB_TAG_INVALID_HIGH (1 << (TSB_TAG_INVALID_BIT - 32)) + +#define TSB_MEMBAR membar #StoreStore + +/* Some cpus support physical address quad loads. We want to use + * those if possible so we don't need to hard-lock the TSB mapping + * into the TLB. We encode some instruction patching in order to + * support this. + * + * The kernel TSB is locked into the TLB by virtue of being in the + * kernel image, so we don't play these games for swapper_tsb access. + */ +#ifndef __ASSEMBLY__ +struct tsb_ldquad_phys_patch_entry { + unsigned int addr; + unsigned int sun4u_insn; + unsigned int sun4v_insn; +}; +extern struct tsb_ldquad_phys_patch_entry __tsb_ldquad_phys_patch, + __tsb_ldquad_phys_patch_end; + +struct tsb_phys_patch_entry { + unsigned int addr; + unsigned int insn; +}; +extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end; +#endif +#define TSB_LOAD_QUAD(TSB, REG) \ +661: ldda [TSB] ASI_NUCLEUS_QUAD_LDD, REG; \ + .section .tsb_ldquad_phys_patch, "ax"; \ + .word 661b; \ + ldda [TSB] ASI_QUAD_LDD_PHYS, REG; \ + ldda [TSB] ASI_QUAD_LDD_PHYS_4V, REG; \ + .previous + +#define TSB_LOAD_TAG_HIGH(TSB, REG) \ +661: lduwa [TSB] ASI_N, REG; \ + .section .tsb_phys_patch, "ax"; \ + .word 661b; \ + lduwa [TSB] ASI_PHYS_USE_EC, REG; \ + .previous + +#define TSB_LOAD_TAG(TSB, REG) \ +661: ldxa [TSB] ASI_N, REG; \ + .section .tsb_phys_patch, "ax"; \ + .word 661b; \ + ldxa [TSB] ASI_PHYS_USE_EC, REG; \ + .previous + +#define TSB_CAS_TAG_HIGH(TSB, REG1, REG2) \ +661: casa [TSB] ASI_N, REG1, REG2; \ + .section .tsb_phys_patch, "ax"; \ + .word 661b; \ + casa [TSB] ASI_PHYS_USE_EC, REG1, REG2; \ + .previous + +#define TSB_CAS_TAG(TSB, REG1, REG2) \ +661: casxa [TSB] ASI_N, REG1, REG2; \ + .section .tsb_phys_patch, "ax"; \ + .word 661b; \ + casxa [TSB] ASI_PHYS_USE_EC, REG1, REG2; \ + .previous + +#define TSB_STORE(ADDR, VAL) \ +661: stxa VAL, [ADDR] ASI_N; \ + .section .tsb_phys_patch, "ax"; \ + .word 661b; \ + stxa VAL, [ADDR] ASI_PHYS_USE_EC; \ + .previous + +#define TSB_LOCK_TAG(TSB, REG1, REG2) \ +99: TSB_LOAD_TAG_HIGH(TSB, REG1); \ + sethi %hi(TSB_TAG_LOCK_HIGH), REG2;\ + andcc REG1, REG2, %g0; \ + bne,pn %icc, 99b; \ + nop; \ + TSB_CAS_TAG_HIGH(TSB, REG1, REG2); \ + cmp REG1, REG2; \ + bne,pn %icc, 99b; \ + nop; \ + TSB_MEMBAR + +#define TSB_WRITE(TSB, TTE, TAG) \ + add TSB, 0x8, TSB; \ + TSB_STORE(TSB, TTE); \ + sub TSB, 0x8, TSB; \ + TSB_MEMBAR; \ + TSB_STORE(TSB, TAG); + +#define KTSB_LOAD_QUAD(TSB, REG) \ + ldda [TSB] ASI_NUCLEUS_QUAD_LDD, REG; + +#define KTSB_STORE(ADDR, VAL) \ + stxa VAL, [ADDR] ASI_N; + +#define KTSB_LOCK_TAG(TSB, REG1, REG2) \ +99: lduwa [TSB] ASI_N, REG1; \ + sethi %hi(TSB_TAG_LOCK_HIGH), REG2;\ + andcc REG1, REG2, %g0; \ + bne,pn %icc, 99b; \ + nop; \ + casa [TSB] ASI_N, REG1, REG2;\ + cmp REG1, REG2; \ + bne,pn %icc, 99b; \ + nop; \ + TSB_MEMBAR + +#define KTSB_WRITE(TSB, TTE, TAG) \ + add TSB, 0x8, TSB; \ + stxa TTE, [TSB] ASI_N; \ + sub TSB, 0x8, TSB; \ + TSB_MEMBAR; \ + stxa TAG, [TSB] ASI_N; + + /* Do a kernel page table walk. Leaves physical PTE pointer in + * REG1. Jumps to FAIL_LABEL on early page table walk termination. + * VADDR will not be clobbered, but REG2 will. + */ +#define KERN_PGTABLE_WALK(VADDR, REG1, REG2, FAIL_LABEL) \ + sethi %hi(swapper_pg_dir), REG1; \ + or REG1, %lo(swapper_pg_dir), REG1; \ + sllx VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + andn REG2, 0x3, REG2; \ + lduw [REG1 + REG2], REG1; \ + brz,pn REG1, FAIL_LABEL; \ + sllx VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + sllx REG1, 11, REG1; \ + andn REG2, 0x3, REG2; \ + lduwa [REG1 + REG2] ASI_PHYS_USE_EC, REG1; \ + brz,pn REG1, FAIL_LABEL; \ + sllx VADDR, 64 - PMD_SHIFT, REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + sllx REG1, 11, REG1; \ + andn REG2, 0x7, REG2; \ + add REG1, REG2, REG1; + + /* Do a user page table walk in MMU globals. Leaves physical PTE + * pointer in REG1. Jumps to FAIL_LABEL on early page table walk + * termination. Physical base of page tables is in PHYS_PGD which + * will not be modified. + * + * VADDR will not be clobbered, but REG1 and REG2 will. + */ +#define USER_PGTABLE_WALK_TL1(VADDR, PHYS_PGD, REG1, REG2, FAIL_LABEL) \ + sllx VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + andn REG2, 0x3, REG2; \ + lduwa [PHYS_PGD + REG2] ASI_PHYS_USE_EC, REG1; \ + brz,pn REG1, FAIL_LABEL; \ + sllx VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + sllx REG1, 11, REG1; \ + andn REG2, 0x3, REG2; \ + lduwa [REG1 + REG2] ASI_PHYS_USE_EC, REG1; \ + brz,pn REG1, FAIL_LABEL; \ + sllx VADDR, 64 - PMD_SHIFT, REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + sllx REG1, 11, REG1; \ + andn REG2, 0x7, REG2; \ + add REG1, REG2, REG1; + +/* Lookup a OBP mapping on VADDR in the prom_trans[] table at TL>0. + * If no entry is found, FAIL_LABEL will be branched to. On success + * the resulting PTE value will be left in REG1. VADDR is preserved + * by this routine. + */ +#define OBP_TRANS_LOOKUP(VADDR, REG1, REG2, REG3, FAIL_LABEL) \ + sethi %hi(prom_trans), REG1; \ + or REG1, %lo(prom_trans), REG1; \ +97: ldx [REG1 + 0x00], REG2; \ + brz,pn REG2, FAIL_LABEL; \ + nop; \ + ldx [REG1 + 0x08], REG3; \ + add REG2, REG3, REG3; \ + cmp REG2, VADDR; \ + bgu,pt %xcc, 98f; \ + cmp VADDR, REG3; \ + bgeu,pt %xcc, 98f; \ + ldx [REG1 + 0x10], REG3; \ + sub VADDR, REG2, REG2; \ + ba,pt %xcc, 99f; \ + add REG3, REG2, REG1; \ +98: ba,pt %xcc, 97b; \ + add REG1, (3 * 8), REG1; \ +99: + + /* We use a 32K TSB for the whole kernel, this allows to + * handle about 16MB of modules and vmalloc mappings without + * incurring many hash conflicts. + */ +#define KERNEL_TSB_SIZE_BYTES (32 * 1024) +#define KERNEL_TSB_NENTRIES \ + (KERNEL_TSB_SIZE_BYTES / 16) +#define KERNEL_TSB4M_NENTRIES 4096 + + /* Do a kernel TSB lookup at tl>0 on VADDR+TAG, branch to OK_LABEL + * on TSB hit. REG1, REG2, REG3, and REG4 are used as temporaries + * and the found TTE will be left in REG1. REG3 and REG4 must + * be an even/odd pair of registers. + * + * VADDR and TAG will be preserved and not clobbered by this macro. + */ +#define KERN_TSB_LOOKUP_TL1(VADDR, TAG, REG1, REG2, REG3, REG4, OK_LABEL) \ + sethi %hi(swapper_tsb), REG1; \ + or REG1, %lo(swapper_tsb), REG1; \ + srlx VADDR, PAGE_SHIFT, REG2; \ + and REG2, (KERNEL_TSB_NENTRIES - 1), REG2; \ + sllx REG2, 4, REG2; \ + add REG1, REG2, REG2; \ + KTSB_LOAD_QUAD(REG2, REG3); \ + cmp REG3, TAG; \ + be,a,pt %xcc, OK_LABEL; \ + mov REG4, REG1; + +#ifndef CONFIG_DEBUG_PAGEALLOC + /* This version uses a trick, the TAG is already (VADDR >> 22) so + * we can make use of that for the index computation. + */ +#define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \ + sethi %hi(swapper_4m_tsb), REG1; \ + or REG1, %lo(swapper_4m_tsb), REG1; \ + and TAG, (KERNEL_TSB4M_NENTRIES - 1), REG2; \ + sllx REG2, 4, REG2; \ + add REG1, REG2, REG2; \ + KTSB_LOAD_QUAD(REG2, REG3); \ + cmp REG3, TAG; \ + be,a,pt %xcc, OK_LABEL; \ + mov REG4, REG1; +#endif + +#endif /* !(_SPARC64_TSB_H) */ diff --git a/arch/sparc/include/asm/tsunami.h b/arch/sparc/include/asm/tsunami.h new file mode 100644 index 00000000000..5bbd1d523ba --- /dev/null +++ b/arch/sparc/include/asm/tsunami.h @@ -0,0 +1,64 @@ +/* + * tsunami.h: Module specific definitions for Tsunami V8 Sparcs + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_TSUNAMI_H +#define _SPARC_TSUNAMI_H + +#include <asm/asi.h> + +/* The MMU control register on the Tsunami: + * + * ----------------------------------------------------------------------- + * | implvers |SW|AV|DV|MV| RSV |PC|ITD|ALC| RSV |PE| RC |IE|DE|RSV|NF|ME| + * ----------------------------------------------------------------------- + * 31 24 23 22 21 20 19-18 17 16 14 13-12 11 10-9 8 7 6-2 1 0 + * + * SW: Enable Software Table Walks 0=off 1=on + * AV: Address View bit + * DV: Data View bit + * MV: Memory View bit + * PC: Parity Control + * ITD: ITBR disable + * ALC: Alternate Cacheable + * PE: Parity Enable 0=off 1=on + * RC: Refresh Control + * IE: Instruction cache Enable 0=off 1=on + * DE: Data cache Enable 0=off 1=on + * NF: No Fault, same as all other SRMMUs + * ME: MMU Enable, same as all other SRMMUs + */ + +#define TSUNAMI_SW 0x00800000 +#define TSUNAMI_AV 0x00400000 +#define TSUNAMI_DV 0x00200000 +#define TSUNAMI_MV 0x00100000 +#define TSUNAMI_PC 0x00020000 +#define TSUNAMI_ITD 0x00010000 +#define TSUNAMI_ALC 0x00008000 +#define TSUNAMI_PE 0x00001000 +#define TSUNAMI_RCMASK 0x00000C00 +#define TSUNAMI_IENAB 0x00000200 +#define TSUNAMI_DENAB 0x00000100 +#define TSUNAMI_NF 0x00000002 +#define TSUNAMI_ME 0x00000001 + +static inline void tsunami_flush_icache(void) +{ + __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" + : /* no outputs */ + : "i" (ASI_M_IC_FLCLEAR) + : "memory"); +} + +static inline void tsunami_flush_dcache(void) +{ + __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" + : /* no outputs */ + : "i" (ASI_M_DC_FLCLEAR) + : "memory"); +} + +#endif /* !(_SPARC_TSUNAMI_H) */ diff --git a/arch/sparc/include/asm/ttable.h b/arch/sparc/include/asm/ttable.h new file mode 100644 index 00000000000..5708ba2719f --- /dev/null +++ b/arch/sparc/include/asm/ttable.h @@ -0,0 +1,658 @@ +#ifndef _SPARC64_TTABLE_H +#define _SPARC64_TTABLE_H + +#include <asm/utrap.h> + +#ifdef __ASSEMBLY__ +#include <asm/thread_info.h> +#endif + +#define BOOT_KERNEL b sparc64_boot; nop; nop; nop; nop; nop; nop; nop; + +/* We need a "cleaned" instruction... */ +#define CLEAN_WINDOW \ + rdpr %cleanwin, %l0; add %l0, 1, %l0; \ + wrpr %l0, 0x0, %cleanwin; \ + clr %o0; clr %o1; clr %o2; clr %o3; \ + clr %o4; clr %o5; clr %o6; clr %o7; \ + clr %l0; clr %l1; clr %l2; clr %l3; \ + clr %l4; clr %l5; clr %l6; clr %l7; \ + retry; \ + nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop; + +#define TRAP(routine) \ + sethi %hi(109f), %g7; \ + ba,pt %xcc, etrap; \ +109: or %g7, %lo(109b), %g7; \ + call routine; \ + add %sp, PTREGS_OFF, %o0; \ + ba,pt %xcc, rtrap; \ + nop; \ + nop; + +#define TRAP_7INSNS(routine) \ + sethi %hi(109f), %g7; \ + ba,pt %xcc, etrap; \ +109: or %g7, %lo(109b), %g7; \ + call routine; \ + add %sp, PTREGS_OFF, %o0; \ + ba,pt %xcc, rtrap; \ + nop; + +#define TRAP_SAVEFPU(routine) \ + sethi %hi(109f), %g7; \ + ba,pt %xcc, do_fptrap; \ +109: or %g7, %lo(109b), %g7; \ + call routine; \ + add %sp, PTREGS_OFF, %o0; \ + ba,pt %xcc, rtrap; \ + nop; \ + nop; + +#define TRAP_NOSAVE(routine) \ + ba,pt %xcc, routine; \ + nop; \ + nop; nop; nop; nop; nop; nop; + +#define TRAP_NOSAVE_7INSNS(routine) \ + ba,pt %xcc, routine; \ + nop; \ + nop; nop; nop; nop; nop; + +#define TRAPTL1(routine) \ + sethi %hi(109f), %g7; \ + ba,pt %xcc, etraptl1; \ +109: or %g7, %lo(109b), %g7; \ + call routine; \ + add %sp, PTREGS_OFF, %o0; \ + ba,pt %xcc, rtrap; \ + nop; \ + nop; + +#define TRAP_ARG(routine, arg) \ + sethi %hi(109f), %g7; \ + ba,pt %xcc, etrap; \ +109: or %g7, %lo(109b), %g7; \ + add %sp, PTREGS_OFF, %o0; \ + call routine; \ + mov arg, %o1; \ + ba,pt %xcc, rtrap; \ + nop; + +#define TRAPTL1_ARG(routine, arg) \ + sethi %hi(109f), %g7; \ + ba,pt %xcc, etraptl1; \ +109: or %g7, %lo(109b), %g7; \ + add %sp, PTREGS_OFF, %o0; \ + call routine; \ + mov arg, %o1; \ + ba,pt %xcc, rtrap; \ + nop; + +#define SYSCALL_TRAP(routine, systbl) \ + rdpr %pil, %g2; \ + mov TSTATE_SYSCALL, %g3; \ + sethi %hi(109f), %g7; \ + ba,pt %xcc, etrap_syscall; \ +109: or %g7, %lo(109b), %g7; \ + sethi %hi(systbl), %l7; \ + ba,pt %xcc, routine; \ + or %l7, %lo(systbl), %l7; + +#define TRAP_UTRAP(handler,lvl) \ + mov handler, %g3; \ + ba,pt %xcc, utrap_trap; \ + mov lvl, %g4; \ + nop; \ + nop; \ + nop; \ + nop; \ + nop; + +#ifdef CONFIG_COMPAT +#define LINUX_32BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sys_call_table32) +#else +#define LINUX_32BIT_SYSCALL_TRAP BTRAP(0x110) +#endif +#define LINUX_64BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall, sys_call_table64) +#define GETCC_TRAP TRAP(getcc) +#define SETCC_TRAP TRAP(setcc) +#define BREAKPOINT_TRAP TRAP(breakpoint_trap) + +#ifdef CONFIG_TRACE_IRQFLAGS + +#define TRAP_IRQ(routine, level) \ + rdpr %pil, %g2; \ + wrpr %g0, 15, %pil; \ + sethi %hi(1f-4), %g7; \ + ba,pt %xcc, etrap_irq; \ + or %g7, %lo(1f-4), %g7; \ + nop; \ + nop; \ + nop; \ + .subsection 2; \ +1: call trace_hardirqs_off; \ + nop; \ + mov level, %o0; \ + call routine; \ + add %sp, PTREGS_OFF, %o1; \ + ba,a,pt %xcc, rtrap_irq; \ + .previous; + +#else + +#define TRAP_IRQ(routine, level) \ + rdpr %pil, %g2; \ + wrpr %g0, 15, %pil; \ + ba,pt %xcc, etrap_irq; \ + rd %pc, %g7; \ + mov level, %o0; \ + call routine; \ + add %sp, PTREGS_OFF, %o1; \ + ba,a,pt %xcc, rtrap_irq; + +#endif + +#define TRAP_IVEC TRAP_NOSAVE(do_ivec) + +#define BTRAP(lvl) TRAP_ARG(bad_trap, lvl) + +#define BTRAPTL1(lvl) TRAPTL1_ARG(bad_trap_tl1, lvl) + +#define FLUSH_WINDOW_TRAP \ + ba,pt %xcc, etrap; \ + rd %pc, %g7; \ + flushw; \ + ldx [%sp + PTREGS_OFF + PT_V9_TNPC], %l1; \ + add %l1, 4, %l2; \ + stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC]; \ + ba,pt %xcc, rtrap; \ + stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC]; + +#ifdef CONFIG_KPROBES +#define KPROBES_TRAP(lvl) TRAP_IRQ(kprobe_trap, lvl) +#else +#define KPROBES_TRAP(lvl) TRAP_ARG(bad_trap, lvl) +#endif + +#ifdef CONFIG_KGDB +#define KGDB_TRAP(lvl) TRAP_IRQ(kgdb_trap, lvl) +#else +#define KGDB_TRAP(lvl) TRAP_ARG(bad_trap, lvl) +#endif + +#define SUN4V_ITSB_MISS \ + ldxa [%g0] ASI_SCRATCHPAD, %g2; \ + ldx [%g2 + HV_FAULT_I_ADDR_OFFSET], %g4; \ + ldx [%g2 + HV_FAULT_I_CTX_OFFSET], %g5; \ + srlx %g4, 22, %g6; \ + ba,pt %xcc, sun4v_itsb_miss; \ + nop; \ + nop; \ + nop; + +#define SUN4V_DTSB_MISS \ + ldxa [%g0] ASI_SCRATCHPAD, %g2; \ + ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g4; \ + ldx [%g2 + HV_FAULT_D_CTX_OFFSET], %g5; \ + srlx %g4, 22, %g6; \ + ba,pt %xcc, sun4v_dtsb_miss; \ + nop; \ + nop; \ + nop; + +/* Before touching these macros, you owe it to yourself to go and + * see how arch/sparc64/kernel/winfixup.S works... -DaveM + * + * For the user cases we used to use the %asi register, but + * it turns out that the "wr xxx, %asi" costs ~5 cycles, so + * now we use immediate ASI loads and stores instead. Kudos + * to Greg Onufer for pointing out this performance anomaly. + * + * Further note that we cannot use the g2, g4, g5, and g7 alternate + * globals in the spill routines, check out the save instruction in + * arch/sparc64/kernel/etrap.S to see what I mean about g2, and + * g4/g5 are the globals which are preserved by etrap processing + * for the caller of it. The g7 register is the return pc for + * etrap. Finally, g6 is the current thread register so we cannot + * us it in the spill handlers either. Most of these rules do not + * apply to fill processing, only g6 is not usable. + */ + +/* Normal kernel spill */ +#define SPILL_0_NORMAL \ + stx %l0, [%sp + STACK_BIAS + 0x00]; \ + stx %l1, [%sp + STACK_BIAS + 0x08]; \ + stx %l2, [%sp + STACK_BIAS + 0x10]; \ + stx %l3, [%sp + STACK_BIAS + 0x18]; \ + stx %l4, [%sp + STACK_BIAS + 0x20]; \ + stx %l5, [%sp + STACK_BIAS + 0x28]; \ + stx %l6, [%sp + STACK_BIAS + 0x30]; \ + stx %l7, [%sp + STACK_BIAS + 0x38]; \ + stx %i0, [%sp + STACK_BIAS + 0x40]; \ + stx %i1, [%sp + STACK_BIAS + 0x48]; \ + stx %i2, [%sp + STACK_BIAS + 0x50]; \ + stx %i3, [%sp + STACK_BIAS + 0x58]; \ + stx %i4, [%sp + STACK_BIAS + 0x60]; \ + stx %i5, [%sp + STACK_BIAS + 0x68]; \ + stx %i6, [%sp + STACK_BIAS + 0x70]; \ + stx %i7, [%sp + STACK_BIAS + 0x78]; \ + saved; retry; nop; nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; nop; nop; nop; nop; + +#define SPILL_0_NORMAL_ETRAP \ +etrap_kernel_spill: \ + stx %l0, [%sp + STACK_BIAS + 0x00]; \ + stx %l1, [%sp + STACK_BIAS + 0x08]; \ + stx %l2, [%sp + STACK_BIAS + 0x10]; \ + stx %l3, [%sp + STACK_BIAS + 0x18]; \ + stx %l4, [%sp + STACK_BIAS + 0x20]; \ + stx %l5, [%sp + STACK_BIAS + 0x28]; \ + stx %l6, [%sp + STACK_BIAS + 0x30]; \ + stx %l7, [%sp + STACK_BIAS + 0x38]; \ + stx %i0, [%sp + STACK_BIAS + 0x40]; \ + stx %i1, [%sp + STACK_BIAS + 0x48]; \ + stx %i2, [%sp + STACK_BIAS + 0x50]; \ + stx %i3, [%sp + STACK_BIAS + 0x58]; \ + stx %i4, [%sp + STACK_BIAS + 0x60]; \ + stx %i5, [%sp + STACK_BIAS + 0x68]; \ + stx %i6, [%sp + STACK_BIAS + 0x70]; \ + stx %i7, [%sp + STACK_BIAS + 0x78]; \ + saved; \ + sub %g1, 2, %g1; \ + ba,pt %xcc, etrap_save; \ + wrpr %g1, %cwp; \ + nop; nop; nop; nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; + +/* Normal 64bit spill */ +#define SPILL_1_GENERIC(ASI) \ + add %sp, STACK_BIAS + 0x00, %g1; \ + stxa %l0, [%g1 + %g0] ASI; \ + mov 0x08, %g3; \ + stxa %l1, [%g1 + %g3] ASI; \ + add %g1, 0x10, %g1; \ + stxa %l2, [%g1 + %g0] ASI; \ + stxa %l3, [%g1 + %g3] ASI; \ + add %g1, 0x10, %g1; \ + stxa %l4, [%g1 + %g0] ASI; \ + stxa %l5, [%g1 + %g3] ASI; \ + add %g1, 0x10, %g1; \ + stxa %l6, [%g1 + %g0] ASI; \ + stxa %l7, [%g1 + %g3] ASI; \ + add %g1, 0x10, %g1; \ + stxa %i0, [%g1 + %g0] ASI; \ + stxa %i1, [%g1 + %g3] ASI; \ + add %g1, 0x10, %g1; \ + stxa %i2, [%g1 + %g0] ASI; \ + stxa %i3, [%g1 + %g3] ASI; \ + add %g1, 0x10, %g1; \ + stxa %i4, [%g1 + %g0] ASI; \ + stxa %i5, [%g1 + %g3] ASI; \ + add %g1, 0x10, %g1; \ + stxa %i6, [%g1 + %g0] ASI; \ + stxa %i7, [%g1 + %g3] ASI; \ + saved; \ + retry; nop; nop; \ + b,a,pt %xcc, spill_fixup_dax; \ + b,a,pt %xcc, spill_fixup_mna; \ + b,a,pt %xcc, spill_fixup; + +#define SPILL_1_GENERIC_ETRAP \ +etrap_user_spill_64bit: \ + stxa %l0, [%sp + STACK_BIAS + 0x00] %asi; \ + stxa %l1, [%sp + STACK_BIAS + 0x08] %asi; \ + stxa %l2, [%sp + STACK_BIAS + 0x10] %asi; \ + stxa %l3, [%sp + STACK_BIAS + 0x18] %asi; \ + stxa %l4, [%sp + STACK_BIAS + 0x20] %asi; \ + stxa %l5, [%sp + STACK_BIAS + 0x28] %asi; \ + stxa %l6, [%sp + STACK_BIAS + 0x30] %asi; \ + stxa %l7, [%sp + STACK_BIAS + 0x38] %asi; \ + stxa %i0, [%sp + STACK_BIAS + 0x40] %asi; \ + stxa %i1, [%sp + STACK_BIAS + 0x48] %asi; \ + stxa %i2, [%sp + STACK_BIAS + 0x50] %asi; \ + stxa %i3, [%sp + STACK_BIAS + 0x58] %asi; \ + stxa %i4, [%sp + STACK_BIAS + 0x60] %asi; \ + stxa %i5, [%sp + STACK_BIAS + 0x68] %asi; \ + stxa %i6, [%sp + STACK_BIAS + 0x70] %asi; \ + stxa %i7, [%sp + STACK_BIAS + 0x78] %asi; \ + saved; \ + sub %g1, 2, %g1; \ + ba,pt %xcc, etrap_save; \ + wrpr %g1, %cwp; \ + nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; \ + ba,a,pt %xcc, etrap_spill_fixup_64bit; \ + ba,a,pt %xcc, etrap_spill_fixup_64bit; \ + ba,a,pt %xcc, etrap_spill_fixup_64bit; + +#define SPILL_1_GENERIC_ETRAP_FIXUP \ +etrap_spill_fixup_64bit: \ + ldub [%g6 + TI_WSAVED], %g1; \ + sll %g1, 3, %g3; \ + add %g6, %g3, %g3; \ + stx %sp, [%g3 + TI_RWIN_SPTRS]; \ + sll %g1, 7, %g3; \ + add %g6, %g3, %g3; \ + stx %l0, [%g3 + TI_REG_WINDOW + 0x00]; \ + stx %l1, [%g3 + TI_REG_WINDOW + 0x08]; \ + stx %l2, [%g3 + TI_REG_WINDOW + 0x10]; \ + stx %l3, [%g3 + TI_REG_WINDOW + 0x18]; \ + stx %l4, [%g3 + TI_REG_WINDOW + 0x20]; \ + stx %l5, [%g3 + TI_REG_WINDOW + 0x28]; \ + stx %l6, [%g3 + TI_REG_WINDOW + 0x30]; \ + stx %l7, [%g3 + TI_REG_WINDOW + 0x38]; \ + stx %i0, [%g3 + TI_REG_WINDOW + 0x40]; \ + stx %i1, [%g3 + TI_REG_WINDOW + 0x48]; \ + stx %i2, [%g3 + TI_REG_WINDOW + 0x50]; \ + stx %i3, [%g3 + TI_REG_WINDOW + 0x58]; \ + stx %i4, [%g3 + TI_REG_WINDOW + 0x60]; \ + stx %i5, [%g3 + TI_REG_WINDOW + 0x68]; \ + stx %i6, [%g3 + TI_REG_WINDOW + 0x70]; \ + stx %i7, [%g3 + TI_REG_WINDOW + 0x78]; \ + add %g1, 1, %g1; \ + stb %g1, [%g6 + TI_WSAVED]; \ + saved; \ + rdpr %cwp, %g1; \ + sub %g1, 2, %g1; \ + ba,pt %xcc, etrap_save; \ + wrpr %g1, %cwp; \ + nop; nop; nop + +/* Normal 32bit spill */ +#define SPILL_2_GENERIC(ASI) \ + srl %sp, 0, %sp; \ + stwa %l0, [%sp + %g0] ASI; \ + mov 0x04, %g3; \ + stwa %l1, [%sp + %g3] ASI; \ + add %sp, 0x08, %g1; \ + stwa %l2, [%g1 + %g0] ASI; \ + stwa %l3, [%g1 + %g3] ASI; \ + add %g1, 0x08, %g1; \ + stwa %l4, [%g1 + %g0] ASI; \ + stwa %l5, [%g1 + %g3] ASI; \ + add %g1, 0x08, %g1; \ + stwa %l6, [%g1 + %g0] ASI; \ + stwa %l7, [%g1 + %g3] ASI; \ + add %g1, 0x08, %g1; \ + stwa %i0, [%g1 + %g0] ASI; \ + stwa %i1, [%g1 + %g3] ASI; \ + add %g1, 0x08, %g1; \ + stwa %i2, [%g1 + %g0] ASI; \ + stwa %i3, [%g1 + %g3] ASI; \ + add %g1, 0x08, %g1; \ + stwa %i4, [%g1 + %g0] ASI; \ + stwa %i5, [%g1 + %g3] ASI; \ + add %g1, 0x08, %g1; \ + stwa %i6, [%g1 + %g0] ASI; \ + stwa %i7, [%g1 + %g3] ASI; \ + saved; \ + retry; nop; nop; \ + b,a,pt %xcc, spill_fixup_dax; \ + b,a,pt %xcc, spill_fixup_mna; \ + b,a,pt %xcc, spill_fixup; + +#define SPILL_2_GENERIC_ETRAP \ +etrap_user_spill_32bit: \ + srl %sp, 0, %sp; \ + stwa %l0, [%sp + 0x00] %asi; \ + stwa %l1, [%sp + 0x04] %asi; \ + stwa %l2, [%sp + 0x08] %asi; \ + stwa %l3, [%sp + 0x0c] %asi; \ + stwa %l4, [%sp + 0x10] %asi; \ + stwa %l5, [%sp + 0x14] %asi; \ + stwa %l6, [%sp + 0x18] %asi; \ + stwa %l7, [%sp + 0x1c] %asi; \ + stwa %i0, [%sp + 0x20] %asi; \ + stwa %i1, [%sp + 0x24] %asi; \ + stwa %i2, [%sp + 0x28] %asi; \ + stwa %i3, [%sp + 0x2c] %asi; \ + stwa %i4, [%sp + 0x30] %asi; \ + stwa %i5, [%sp + 0x34] %asi; \ + stwa %i6, [%sp + 0x38] %asi; \ + stwa %i7, [%sp + 0x3c] %asi; \ + saved; \ + sub %g1, 2, %g1; \ + ba,pt %xcc, etrap_save; \ + wrpr %g1, %cwp; \ + nop; nop; nop; nop; \ + nop; nop; nop; nop; \ + ba,a,pt %xcc, etrap_spill_fixup_32bit; \ + ba,a,pt %xcc, etrap_spill_fixup_32bit; \ + ba,a,pt %xcc, etrap_spill_fixup_32bit; + +#define SPILL_2_GENERIC_ETRAP_FIXUP \ +etrap_spill_fixup_32bit: \ + ldub [%g6 + TI_WSAVED], %g1; \ + sll %g1, 3, %g3; \ + add %g6, %g3, %g3; \ + stx %sp, [%g3 + TI_RWIN_SPTRS]; \ + sll %g1, 7, %g3; \ + add %g6, %g3, %g3; \ + stw %l0, [%g3 + TI_REG_WINDOW + 0x00]; \ + stw %l1, [%g3 + TI_REG_WINDOW + 0x04]; \ + stw %l2, [%g3 + TI_REG_WINDOW + 0x08]; \ + stw %l3, [%g3 + TI_REG_WINDOW + 0x0c]; \ + stw %l4, [%g3 + TI_REG_WINDOW + 0x10]; \ + stw %l5, [%g3 + TI_REG_WINDOW + 0x14]; \ + stw %l6, [%g3 + TI_REG_WINDOW + 0x18]; \ + stw %l7, [%g3 + TI_REG_WINDOW + 0x1c]; \ + stw %i0, [%g3 + TI_REG_WINDOW + 0x20]; \ + stw %i1, [%g3 + TI_REG_WINDOW + 0x24]; \ + stw %i2, [%g3 + TI_REG_WINDOW + 0x28]; \ + stw %i3, [%g3 + TI_REG_WINDOW + 0x2c]; \ + stw %i4, [%g3 + TI_REG_WINDOW + 0x30]; \ + stw %i5, [%g3 + TI_REG_WINDOW + 0x34]; \ + stw %i6, [%g3 + TI_REG_WINDOW + 0x38]; \ + stw %i7, [%g3 + TI_REG_WINDOW + 0x3c]; \ + add %g1, 1, %g1; \ + stb %g1, [%g6 + TI_WSAVED]; \ + saved; \ + rdpr %cwp, %g1; \ + sub %g1, 2, %g1; \ + ba,pt %xcc, etrap_save; \ + wrpr %g1, %cwp; \ + nop; nop; nop + +#define SPILL_1_NORMAL SPILL_1_GENERIC(ASI_AIUP) +#define SPILL_2_NORMAL SPILL_2_GENERIC(ASI_AIUP) +#define SPILL_3_NORMAL SPILL_0_NORMAL +#define SPILL_4_NORMAL SPILL_0_NORMAL +#define SPILL_5_NORMAL SPILL_0_NORMAL +#define SPILL_6_NORMAL SPILL_0_NORMAL +#define SPILL_7_NORMAL SPILL_0_NORMAL + +#define SPILL_0_OTHER SPILL_0_NORMAL +#define SPILL_1_OTHER SPILL_1_GENERIC(ASI_AIUS) +#define SPILL_2_OTHER SPILL_2_GENERIC(ASI_AIUS) +#define SPILL_3_OTHER SPILL_3_NORMAL +#define SPILL_4_OTHER SPILL_4_NORMAL +#define SPILL_5_OTHER SPILL_5_NORMAL +#define SPILL_6_OTHER SPILL_6_NORMAL +#define SPILL_7_OTHER SPILL_7_NORMAL + +/* Normal kernel fill */ +#define FILL_0_NORMAL \ + ldx [%sp + STACK_BIAS + 0x00], %l0; \ + ldx [%sp + STACK_BIAS + 0x08], %l1; \ + ldx [%sp + STACK_BIAS + 0x10], %l2; \ + ldx [%sp + STACK_BIAS + 0x18], %l3; \ + ldx [%sp + STACK_BIAS + 0x20], %l4; \ + ldx [%sp + STACK_BIAS + 0x28], %l5; \ + ldx [%sp + STACK_BIAS + 0x30], %l6; \ + ldx [%sp + STACK_BIAS + 0x38], %l7; \ + ldx [%sp + STACK_BIAS + 0x40], %i0; \ + ldx [%sp + STACK_BIAS + 0x48], %i1; \ + ldx [%sp + STACK_BIAS + 0x50], %i2; \ + ldx [%sp + STACK_BIAS + 0x58], %i3; \ + ldx [%sp + STACK_BIAS + 0x60], %i4; \ + ldx [%sp + STACK_BIAS + 0x68], %i5; \ + ldx [%sp + STACK_BIAS + 0x70], %i6; \ + ldx [%sp + STACK_BIAS + 0x78], %i7; \ + restored; retry; nop; nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; nop; nop; nop; nop; + +#define FILL_0_NORMAL_RTRAP \ +kern_rtt_fill: \ + rdpr %cwp, %g1; \ + sub %g1, 1, %g1; \ + wrpr %g1, %cwp; \ + ldx [%sp + STACK_BIAS + 0x00], %l0; \ + ldx [%sp + STACK_BIAS + 0x08], %l1; \ + ldx [%sp + STACK_BIAS + 0x10], %l2; \ + ldx [%sp + STACK_BIAS + 0x18], %l3; \ + ldx [%sp + STACK_BIAS + 0x20], %l4; \ + ldx [%sp + STACK_BIAS + 0x28], %l5; \ + ldx [%sp + STACK_BIAS + 0x30], %l6; \ + ldx [%sp + STACK_BIAS + 0x38], %l7; \ + ldx [%sp + STACK_BIAS + 0x40], %i0; \ + ldx [%sp + STACK_BIAS + 0x48], %i1; \ + ldx [%sp + STACK_BIAS + 0x50], %i2; \ + ldx [%sp + STACK_BIAS + 0x58], %i3; \ + ldx [%sp + STACK_BIAS + 0x60], %i4; \ + ldx [%sp + STACK_BIAS + 0x68], %i5; \ + ldx [%sp + STACK_BIAS + 0x70], %i6; \ + ldx [%sp + STACK_BIAS + 0x78], %i7; \ + restored; \ + add %g1, 1, %g1; \ + ba,pt %xcc, kern_rtt_restore; \ + wrpr %g1, %cwp; \ + nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; + + +/* Normal 64bit fill */ +#define FILL_1_GENERIC(ASI) \ + add %sp, STACK_BIAS + 0x00, %g1; \ + ldxa [%g1 + %g0] ASI, %l0; \ + mov 0x08, %g2; \ + mov 0x10, %g3; \ + ldxa [%g1 + %g2] ASI, %l1; \ + mov 0x18, %g5; \ + ldxa [%g1 + %g3] ASI, %l2; \ + ldxa [%g1 + %g5] ASI, %l3; \ + add %g1, 0x20, %g1; \ + ldxa [%g1 + %g0] ASI, %l4; \ + ldxa [%g1 + %g2] ASI, %l5; \ + ldxa [%g1 + %g3] ASI, %l6; \ + ldxa [%g1 + %g5] ASI, %l7; \ + add %g1, 0x20, %g1; \ + ldxa [%g1 + %g0] ASI, %i0; \ + ldxa [%g1 + %g2] ASI, %i1; \ + ldxa [%g1 + %g3] ASI, %i2; \ + ldxa [%g1 + %g5] ASI, %i3; \ + add %g1, 0x20, %g1; \ + ldxa [%g1 + %g0] ASI, %i4; \ + ldxa [%g1 + %g2] ASI, %i5; \ + ldxa [%g1 + %g3] ASI, %i6; \ + ldxa [%g1 + %g5] ASI, %i7; \ + restored; \ + retry; nop; nop; nop; nop; \ + b,a,pt %xcc, fill_fixup_dax; \ + b,a,pt %xcc, fill_fixup_mna; \ + b,a,pt %xcc, fill_fixup; + +#define FILL_1_GENERIC_RTRAP \ +user_rtt_fill_64bit: \ + ldxa [%sp + STACK_BIAS + 0x00] %asi, %l0; \ + ldxa [%sp + STACK_BIAS + 0x08] %asi, %l1; \ + ldxa [%sp + STACK_BIAS + 0x10] %asi, %l2; \ + ldxa [%sp + STACK_BIAS + 0x18] %asi, %l3; \ + ldxa [%sp + STACK_BIAS + 0x20] %asi, %l4; \ + ldxa [%sp + STACK_BIAS + 0x28] %asi, %l5; \ + ldxa [%sp + STACK_BIAS + 0x30] %asi, %l6; \ + ldxa [%sp + STACK_BIAS + 0x38] %asi, %l7; \ + ldxa [%sp + STACK_BIAS + 0x40] %asi, %i0; \ + ldxa [%sp + STACK_BIAS + 0x48] %asi, %i1; \ + ldxa [%sp + STACK_BIAS + 0x50] %asi, %i2; \ + ldxa [%sp + STACK_BIAS + 0x58] %asi, %i3; \ + ldxa [%sp + STACK_BIAS + 0x60] %asi, %i4; \ + ldxa [%sp + STACK_BIAS + 0x68] %asi, %i5; \ + ldxa [%sp + STACK_BIAS + 0x70] %asi, %i6; \ + ldxa [%sp + STACK_BIAS + 0x78] %asi, %i7; \ + ba,pt %xcc, user_rtt_pre_restore; \ + restored; \ + nop; nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; nop; \ + ba,a,pt %xcc, user_rtt_fill_fixup; \ + ba,a,pt %xcc, user_rtt_fill_fixup; \ + ba,a,pt %xcc, user_rtt_fill_fixup; + + +/* Normal 32bit fill */ +#define FILL_2_GENERIC(ASI) \ + srl %sp, 0, %sp; \ + lduwa [%sp + %g0] ASI, %l0; \ + mov 0x04, %g2; \ + mov 0x08, %g3; \ + lduwa [%sp + %g2] ASI, %l1; \ + mov 0x0c, %g5; \ + lduwa [%sp + %g3] ASI, %l2; \ + lduwa [%sp + %g5] ASI, %l3; \ + add %sp, 0x10, %g1; \ + lduwa [%g1 + %g0] ASI, %l4; \ + lduwa [%g1 + %g2] ASI, %l5; \ + lduwa [%g1 + %g3] ASI, %l6; \ + lduwa [%g1 + %g5] ASI, %l7; \ + add %g1, 0x10, %g1; \ + lduwa [%g1 + %g0] ASI, %i0; \ + lduwa [%g1 + %g2] ASI, %i1; \ + lduwa [%g1 + %g3] ASI, %i2; \ + lduwa [%g1 + %g5] ASI, %i3; \ + add %g1, 0x10, %g1; \ + lduwa [%g1 + %g0] ASI, %i4; \ + lduwa [%g1 + %g2] ASI, %i5; \ + lduwa [%g1 + %g3] ASI, %i6; \ + lduwa [%g1 + %g5] ASI, %i7; \ + restored; \ + retry; nop; nop; nop; nop; \ + b,a,pt %xcc, fill_fixup_dax; \ + b,a,pt %xcc, fill_fixup_mna; \ + b,a,pt %xcc, fill_fixup; + +#define FILL_2_GENERIC_RTRAP \ +user_rtt_fill_32bit: \ + srl %sp, 0, %sp; \ + lduwa [%sp + 0x00] %asi, %l0; \ + lduwa [%sp + 0x04] %asi, %l1; \ + lduwa [%sp + 0x08] %asi, %l2; \ + lduwa [%sp + 0x0c] %asi, %l3; \ + lduwa [%sp + 0x10] %asi, %l4; \ + lduwa [%sp + 0x14] %asi, %l5; \ + lduwa [%sp + 0x18] %asi, %l6; \ + lduwa [%sp + 0x1c] %asi, %l7; \ + lduwa [%sp + 0x20] %asi, %i0; \ + lduwa [%sp + 0x24] %asi, %i1; \ + lduwa [%sp + 0x28] %asi, %i2; \ + lduwa [%sp + 0x2c] %asi, %i3; \ + lduwa [%sp + 0x30] %asi, %i4; \ + lduwa [%sp + 0x34] %asi, %i5; \ + lduwa [%sp + 0x38] %asi, %i6; \ + lduwa [%sp + 0x3c] %asi, %i7; \ + ba,pt %xcc, user_rtt_pre_restore; \ + restored; \ + nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; nop; \ + ba,a,pt %xcc, user_rtt_fill_fixup; \ + ba,a,pt %xcc, user_rtt_fill_fixup; \ + ba,a,pt %xcc, user_rtt_fill_fixup; + + +#define FILL_1_NORMAL FILL_1_GENERIC(ASI_AIUP) +#define FILL_2_NORMAL FILL_2_GENERIC(ASI_AIUP) +#define FILL_3_NORMAL FILL_0_NORMAL +#define FILL_4_NORMAL FILL_0_NORMAL +#define FILL_5_NORMAL FILL_0_NORMAL +#define FILL_6_NORMAL FILL_0_NORMAL +#define FILL_7_NORMAL FILL_0_NORMAL + +#define FILL_0_OTHER FILL_0_NORMAL +#define FILL_1_OTHER FILL_1_GENERIC(ASI_AIUS) +#define FILL_2_OTHER FILL_2_GENERIC(ASI_AIUS) +#define FILL_3_OTHER FILL_3_NORMAL +#define FILL_4_OTHER FILL_4_NORMAL +#define FILL_5_OTHER FILL_5_NORMAL +#define FILL_6_OTHER FILL_6_NORMAL +#define FILL_7_OTHER FILL_7_NORMAL + +#endif /* !(_SPARC64_TTABLE_H) */ diff --git a/arch/sparc/include/asm/turbosparc.h b/arch/sparc/include/asm/turbosparc.h new file mode 100644 index 00000000000..17c73282db0 --- /dev/null +++ b/arch/sparc/include/asm/turbosparc.h @@ -0,0 +1,125 @@ +/* + * turbosparc.h: Defines specific to the TurboSparc module. + * This is SRMMU stuff. + * + * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ +#ifndef _SPARC_TURBOSPARC_H +#define _SPARC_TURBOSPARC_H + +#include <asm/asi.h> +#include <asm/pgtsrmmu.h> + +/* Bits in the SRMMU control register for TurboSparc modules. + * + * ------------------------------------------------------------------- + * |impl-vers| RSV| PMC |PE|PC| RSV |BM| RFR |IC|DC|PSO|RSV|ICS|NF|ME| + * ------------------------------------------------------------------- + * 31 24 23-21 20-19 18 17 16-15 14 13-10 9 8 7 6-3 2 1 0 + * + * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode + * + * This indicates whether the TurboSparc is in boot-mode or not. + * + * IC: Instruction Cache -- 0 = off, 1 = on + * DC: Data Cache -- 0 = off, 1 = 0n + * + * These bits enable the on-cpu TurboSparc split I/D caches. + * + * ICS: ICache Snooping -- 0 = disable, 1 = enable snooping of icache + * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap + * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating + * + */ + +#define TURBOSPARC_MMUENABLE 0x00000001 +#define TURBOSPARC_NOFAULT 0x00000002 +#define TURBOSPARC_ICSNOOP 0x00000004 +#define TURBOSPARC_PSO 0x00000080 +#define TURBOSPARC_DCENABLE 0x00000100 /* Enable data cache */ +#define TURBOSPARC_ICENABLE 0x00000200 /* Enable instruction cache */ +#define TURBOSPARC_BMODE 0x00004000 +#define TURBOSPARC_PARITYODD 0x00020000 /* Parity odd, if enabled */ +#define TURBOSPARC_PCENABLE 0x00040000 /* Enable parity checking */ + +/* Bits in the CPU configuration register for TurboSparc modules. + * + * ------------------------------------------------------- + * |IOClk|SNP|AXClk| RAH | WS | RSV |SBC|WT|uS2|SE|SCC| + * ------------------------------------------------------- + * 31 30 29-28 27-26 25-23 22-8 7-6 5 4 3 2-0 + * + */ + +#define TURBOSPARC_SCENABLE 0x00000008 /* Secondary cache enable */ +#define TURBOSPARC_uS2 0x00000010 /* Swift compatibility mode */ +#define TURBOSPARC_WTENABLE 0x00000020 /* Write thru for dcache */ +#define TURBOSPARC_SNENABLE 0x40000000 /* DVMA snoop enable */ + +#ifndef __ASSEMBLY__ + +/* Bits [13:5] select one of 512 instruction cache tags */ +static inline void turbosparc_inv_insn_tag(unsigned long addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_TXTC_TAG) + : "memory"); +} + +/* Bits [13:5] select one of 512 data cache tags */ +static inline void turbosparc_inv_data_tag(unsigned long addr) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (addr), "i" (ASI_M_DATAC_TAG) + : "memory"); +} + +static inline void turbosparc_flush_icache(void) +{ + unsigned long addr; + + for (addr = 0; addr < 0x4000; addr += 0x20) + turbosparc_inv_insn_tag(addr); +} + +static inline void turbosparc_flush_dcache(void) +{ + unsigned long addr; + + for (addr = 0; addr < 0x4000; addr += 0x20) + turbosparc_inv_data_tag(addr); +} + +static inline void turbosparc_idflash_clear(void) +{ + unsigned long addr; + + for (addr = 0; addr < 0x4000; addr += 0x20) { + turbosparc_inv_insn_tag(addr); + turbosparc_inv_data_tag(addr); + } +} + +static inline void turbosparc_set_ccreg(unsigned long regval) +{ + __asm__ __volatile__("sta %0, [%1] %2\n\t" + : /* no outputs */ + : "r" (regval), "r" (0x600), "i" (ASI_M_MMUREGS) + : "memory"); +} + +static inline unsigned long turbosparc_get_ccreg(void) +{ + unsigned long regval; + + __asm__ __volatile__("lda [%1] %2, %0\n\t" + : "=r" (regval) + : "r" (0x600), "i" (ASI_M_MMUREGS)); + return regval; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* !(_SPARC_TURBOSPARC_H) */ diff --git a/arch/sparc/include/asm/types.h b/arch/sparc/include/asm/types.h new file mode 100644 index 00000000000..8c28fde5eaa --- /dev/null +++ b/arch/sparc/include/asm/types.h @@ -0,0 +1,62 @@ +#ifndef _SPARC_TYPES_H +#define _SPARC_TYPES_H +/* + * This file is never included by application software unless + * explicitly requested (e.g., via linux/types.h) in which case the + * application is Linux specific so (user-) name space pollution is + * not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + */ + +#if defined(__sparc__) && defined(__arch64__) + +/*** SPARC 64 bit ***/ +#include <asm-generic/int-l64.h> + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +#ifdef __KERNEL__ + +#define BITS_PER_LONG 64 + +#ifndef __ASSEMBLY__ + +/* Dma addresses come in generic and 64-bit flavours. */ + +typedef u32 dma_addr_t; +typedef u64 dma64_addr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#else + +/*** SPARC 32 bit ***/ +#include <asm-generic/int-ll64.h> + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +typedef u32 dma_addr_t; +typedef u32 dma64_addr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* defined(__sparc__) && defined(__arch64__) */ + +#endif /* defined(_SPARC_TYPES_H) */ diff --git a/arch/sparc/include/asm/uaccess.h b/arch/sparc/include/asm/uaccess.h new file mode 100644 index 00000000000..e88fbe5c045 --- /dev/null +++ b/arch/sparc/include/asm/uaccess.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_UACCESS_H +#define ___ASM_SPARC_UACCESS_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/uaccess_64.h> +#else +#include <asm/uaccess_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/uaccess_32.h b/arch/sparc/include/asm/uaccess_32.h new file mode 100644 index 00000000000..47d5619d43f --- /dev/null +++ b/arch/sparc/include/asm/uaccess_32.h @@ -0,0 +1,336 @@ +/* + * uaccess.h: User space memore access functions. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ +#ifndef _ASM_UACCESS_H +#define _ASM_UACCESS_H + +#ifdef __KERNEL__ +#include <linux/compiler.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <asm/vac-ops.h> +#endif + +#ifndef __ASSEMBLY__ + +/* Sparc is not segmented, however we need to be able to fool access_ok() + * when doing system calls from kernel mode legitimately. + * + * "For historical reasons, these macros are grossly misnamed." -Linus + */ + +#define KERNEL_DS ((mm_segment_t) { 0 }) +#define USER_DS ((mm_segment_t) { -1 }) + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define get_ds() (KERNEL_DS) +#define get_fs() (current->thread.current_ds) +#define set_fs(val) ((current->thread.current_ds) = (val)) + +#define segment_eq(a,b) ((a).seg == (b).seg) + +/* We have there a nice not-mapped page at PAGE_OFFSET - PAGE_SIZE, so that this test + * can be fairly lightweight. + * No one can read/write anything from userland in the kernel space by setting + * large size and address near to PAGE_OFFSET - a fault will break his intentions. + */ +#define __user_ok(addr, size) ({ (void)(size); (addr) < STACK_TOP; }) +#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS)) +#define __access_ok(addr,size) (__user_ok((addr) & get_fs().seg,(size))) +#define access_ok(type, addr, size) \ + ({ (void)(type); __access_ok((unsigned long)(addr), size); }) + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + * + * There is a special way how to put a range of potentially faulting + * insns (like twenty ldd/std's with now intervening other instructions) + * You specify address of first in insn and 0 in fixup and in the next + * exception_table_entry you specify last potentially faulting insn + 1 + * and in fixup the routine which should handle the fault. + * That fixup code will get + * (faulting_insn_address - first_insn_in_the_range_address)/4 + * in %g2 (ie. index of the faulting instruction in the range). + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_extables_range(unsigned long addr, unsigned long *g2); + +extern void __ret_efault(void); + +/* Uh, these should become the main single-value transfer routines.. + * They automatically use the right size if we just have the right + * pointer type.. + * + * This gets kind of ugly. We want to return _two_ values in "get_user()" + * and yet we don't want to do any pointers, because that is too much + * of a performance impact. Thus we have a few rather ugly macros here, + * and hide all the ugliness from the user. + */ +#define put_user(x,ptr) ({ \ +unsigned long __pu_addr = (unsigned long)(ptr); \ +__chk_user_ptr(ptr); \ +__put_user_check((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); }) + +#define get_user(x,ptr) ({ \ +unsigned long __gu_addr = (unsigned long)(ptr); \ +__chk_user_ptr(ptr); \ +__get_user_check((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); }) + +/* + * The "__xxx" versions do not do address space checking, useful when + * doing multiple accesses to the same area (the user has to do the + * checks by hand with "access_ok()") + */ +#define __put_user(x,ptr) __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) +#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)),__typeof__(*(ptr))) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) ((struct __large_struct __user *)(x)) + +#define __put_user_check(x,addr,size) ({ \ +register int __pu_ret; \ +if (__access_ok(addr,size)) { \ +switch (size) { \ +case 1: __put_user_asm(x,b,addr,__pu_ret); break; \ +case 2: __put_user_asm(x,h,addr,__pu_ret); break; \ +case 4: __put_user_asm(x,,addr,__pu_ret); break; \ +case 8: __put_user_asm(x,d,addr,__pu_ret); break; \ +default: __pu_ret = __put_user_bad(); break; \ +} } else { __pu_ret = -EFAULT; } __pu_ret; }) + +#define __put_user_nocheck(x,addr,size) ({ \ +register int __pu_ret; \ +switch (size) { \ +case 1: __put_user_asm(x,b,addr,__pu_ret); break; \ +case 2: __put_user_asm(x,h,addr,__pu_ret); break; \ +case 4: __put_user_asm(x,,addr,__pu_ret); break; \ +case 8: __put_user_asm(x,d,addr,__pu_ret); break; \ +default: __pu_ret = __put_user_bad(); break; \ +} __pu_ret; }) + +#define __put_user_asm(x,size,addr,ret) \ +__asm__ __volatile__( \ + "/* Put user asm, inline. */\n" \ +"1:\t" "st"#size " %1, %2\n\t" \ + "clr %0\n" \ +"2:\n\n\t" \ + ".section .fixup,#alloc,#execinstr\n\t" \ + ".align 4\n" \ +"3:\n\t" \ + "b 2b\n\t" \ + " mov %3, %0\n\t" \ + ".previous\n\n\t" \ + ".section __ex_table,#alloc\n\t" \ + ".align 4\n\t" \ + ".word 1b, 3b\n\t" \ + ".previous\n\n\t" \ + : "=&r" (ret) : "r" (x), "m" (*__m(addr)), \ + "i" (-EFAULT)) + +extern int __put_user_bad(void); + +#define __get_user_check(x,addr,size,type) ({ \ +register int __gu_ret; \ +register unsigned long __gu_val; \ +if (__access_ok(addr,size)) { \ +switch (size) { \ +case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \ +case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \ +case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \ +case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \ +default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \ +} } else { __gu_val = 0; __gu_ret = -EFAULT; } x = (type) __gu_val; __gu_ret; }) + +#define __get_user_check_ret(x,addr,size,type,retval) ({ \ +register unsigned long __gu_val __asm__ ("l1"); \ +if (__access_ok(addr,size)) { \ +switch (size) { \ +case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \ +case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \ +case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \ +case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \ +default: if (__get_user_bad()) return retval; \ +} x = (type) __gu_val; } else return retval; }) + +#define __get_user_nocheck(x,addr,size,type) ({ \ +register int __gu_ret; \ +register unsigned long __gu_val; \ +switch (size) { \ +case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \ +case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \ +case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \ +case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \ +default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \ +} x = (type) __gu_val; __gu_ret; }) + +#define __get_user_nocheck_ret(x,addr,size,type,retval) ({ \ +register unsigned long __gu_val __asm__ ("l1"); \ +switch (size) { \ +case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \ +case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \ +case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \ +case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \ +default: if (__get_user_bad()) return retval; \ +} x = (type) __gu_val; }) + +#define __get_user_asm(x,size,addr,ret) \ +__asm__ __volatile__( \ + "/* Get user asm, inline. */\n" \ +"1:\t" "ld"#size " %2, %1\n\t" \ + "clr %0\n" \ +"2:\n\n\t" \ + ".section .fixup,#alloc,#execinstr\n\t" \ + ".align 4\n" \ +"3:\n\t" \ + "clr %1\n\t" \ + "b 2b\n\t" \ + " mov %3, %0\n\n\t" \ + ".previous\n\t" \ + ".section __ex_table,#alloc\n\t" \ + ".align 4\n\t" \ + ".word 1b, 3b\n\n\t" \ + ".previous\n\t" \ + : "=&r" (ret), "=&r" (x) : "m" (*__m(addr)), \ + "i" (-EFAULT)) + +#define __get_user_asm_ret(x,size,addr,retval) \ +if (__builtin_constant_p(retval) && retval == -EFAULT) \ +__asm__ __volatile__( \ + "/* Get user asm ret, inline. */\n" \ +"1:\t" "ld"#size " %1, %0\n\n\t" \ + ".section __ex_table,#alloc\n\t" \ + ".align 4\n\t" \ + ".word 1b,__ret_efault\n\n\t" \ + ".previous\n\t" \ + : "=&r" (x) : "m" (*__m(addr))); \ +else \ +__asm__ __volatile__( \ + "/* Get user asm ret, inline. */\n" \ +"1:\t" "ld"#size " %1, %0\n\n\t" \ + ".section .fixup,#alloc,#execinstr\n\t" \ + ".align 4\n" \ +"3:\n\t" \ + "ret\n\t" \ + " restore %%g0, %2, %%o0\n\n\t" \ + ".previous\n\t" \ + ".section __ex_table,#alloc\n\t" \ + ".align 4\n\t" \ + ".word 1b, 3b\n\n\t" \ + ".previous\n\t" \ + : "=&r" (x) : "m" (*__m(addr)), "i" (retval)) + +extern int __get_user_bad(void); + +extern unsigned long __copy_user(void __user *to, const void __user *from, unsigned long size); + +static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n) +{ + if (n && __access_ok((unsigned long) to, n)) + return __copy_user(to, (__force void __user *) from, n); + else + return n; +} + +static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n) +{ + return __copy_user(to, (__force void __user *) from, n); +} + +static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n) +{ + if (n && __access_ok((unsigned long) from, n)) + return __copy_user((__force void __user *) to, from, n); + else + return n; +} + +static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n) +{ + return __copy_user((__force void __user *) to, from, n); +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +static inline unsigned long __clear_user(void __user *addr, unsigned long size) +{ + unsigned long ret; + + __asm__ __volatile__ ( + ".section __ex_table,#alloc\n\t" + ".align 4\n\t" + ".word 1f,3\n\t" + ".previous\n\t" + "mov %2, %%o1\n" + "1:\n\t" + "call __bzero\n\t" + " mov %1, %%o0\n\t" + "mov %%o0, %0\n" + : "=r" (ret) : "r" (addr), "r" (size) : + "o0", "o1", "o2", "o3", "o4", "o5", "o7", + "g1", "g2", "g3", "g4", "g5", "g7", "cc"); + + return ret; +} + +static inline unsigned long clear_user(void __user *addr, unsigned long n) +{ + if (n && __access_ok((unsigned long) addr, n)) + return __clear_user(addr, n); + else + return n; +} + +extern long __strncpy_from_user(char *dest, const char __user *src, long count); + +static inline long strncpy_from_user(char *dest, const char __user *src, long count) +{ + if (__access_ok((unsigned long) src, count)) + return __strncpy_from_user(dest, src, count); + else + return -EFAULT; +} + +extern long __strlen_user(const char __user *); +extern long __strnlen_user(const char __user *, long len); + +static inline long strlen_user(const char __user *str) +{ + if (!access_ok(VERIFY_READ, str, 0)) + return 0; + else + return __strlen_user(str); +} + +static inline long strnlen_user(const char __user *str, long len) +{ + if (!access_ok(VERIFY_READ, str, 0)) + return 0; + else + return __strnlen_user(str, len); +} + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UACCESS_H */ diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h new file mode 100644 index 00000000000..296ef30e05c --- /dev/null +++ b/arch/sparc/include/asm/uaccess_64.h @@ -0,0 +1,273 @@ +#ifndef _ASM_UACCESS_H +#define _ASM_UACCESS_H + +/* + * User space memory access functions + */ + +#ifdef __KERNEL__ +#include <linux/compiler.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <asm/asi.h> +#include <asm/system.h> +#include <asm/spitfire.h> +#include <asm-generic/uaccess.h> +#endif + +#ifndef __ASSEMBLY__ + +/* + * Sparc64 is segmented, though more like the M68K than the I386. + * We use the secondary ASI to address user memory, which references a + * completely different VM map, thus there is zero chance of the user + * doing something queer and tricking us into poking kernel memory. + * + * What is left here is basically what is needed for the other parts of + * the kernel that expect to be able to manipulate, erum, "segments". + * Or perhaps more properly, permissions. + * + * "For historical reasons, these macros are grossly misnamed." -Linus + */ + +#define KERNEL_DS ((mm_segment_t) { ASI_P }) +#define USER_DS ((mm_segment_t) { ASI_AIUS }) /* har har har */ + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define get_fs() ((mm_segment_t) { get_thread_current_ds() }) +#define get_ds() (KERNEL_DS) + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#define set_fs(val) \ +do { \ + set_thread_current_ds((val).seg); \ + __asm__ __volatile__ ("wr %%g0, %0, %%asi" : : "r" ((val).seg)); \ +} while(0) + +static inline int __access_ok(const void __user * addr, unsigned long size) +{ + return 1; +} + +static inline int access_ok(int type, const void __user * addr, unsigned long size) +{ + return 1; +} + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry { + unsigned int insn, fixup; +}; + +extern void __ret_efault(void); +extern void __retl_efault(void); + +/* Uh, these should become the main single-value transfer routines.. + * They automatically use the right size if we just have the right + * pointer type.. + * + * This gets kind of ugly. We want to return _two_ values in "get_user()" + * and yet we don't want to do any pointers, because that is too much + * of a performance impact. Thus we have a few rather ugly macros here, + * and hide all the ugliness from the user. + */ +#define put_user(x,ptr) ({ \ +unsigned long __pu_addr = (unsigned long)(ptr); \ +__chk_user_ptr(ptr); \ +__put_user_nocheck((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); }) + +#define get_user(x,ptr) ({ \ +unsigned long __gu_addr = (unsigned long)(ptr); \ +__chk_user_ptr(ptr); \ +__get_user_nocheck((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); }) + +#define __put_user(x,ptr) put_user(x,ptr) +#define __get_user(x,ptr) get_user(x,ptr) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) ((struct __large_struct *)(x)) + +#define __put_user_nocheck(data,addr,size) ({ \ +register int __pu_ret; \ +switch (size) { \ +case 1: __put_user_asm(data,b,addr,__pu_ret); break; \ +case 2: __put_user_asm(data,h,addr,__pu_ret); break; \ +case 4: __put_user_asm(data,w,addr,__pu_ret); break; \ +case 8: __put_user_asm(data,x,addr,__pu_ret); break; \ +default: __pu_ret = __put_user_bad(); break; \ +} __pu_ret; }) + +#define __put_user_asm(x,size,addr,ret) \ +__asm__ __volatile__( \ + "/* Put user asm, inline. */\n" \ +"1:\t" "st"#size "a %1, [%2] %%asi\n\t" \ + "clr %0\n" \ +"2:\n\n\t" \ + ".section .fixup,#alloc,#execinstr\n\t" \ + ".align 4\n" \ +"3:\n\t" \ + "sethi %%hi(2b), %0\n\t" \ + "jmpl %0 + %%lo(2b), %%g0\n\t" \ + " mov %3, %0\n\n\t" \ + ".previous\n\t" \ + ".section __ex_table,\"a\"\n\t" \ + ".align 4\n\t" \ + ".word 1b, 3b\n\t" \ + ".previous\n\n\t" \ + : "=r" (ret) : "r" (x), "r" (__m(addr)), \ + "i" (-EFAULT)) + +extern int __put_user_bad(void); + +#define __get_user_nocheck(data,addr,size,type) ({ \ +register int __gu_ret; \ +register unsigned long __gu_val; \ +switch (size) { \ +case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \ +case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \ +case 4: __get_user_asm(__gu_val,uw,addr,__gu_ret); break; \ +case 8: __get_user_asm(__gu_val,x,addr,__gu_ret); break; \ +default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \ +} data = (type) __gu_val; __gu_ret; }) + +#define __get_user_nocheck_ret(data,addr,size,type,retval) ({ \ +register unsigned long __gu_val __asm__ ("l1"); \ +switch (size) { \ +case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \ +case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \ +case 4: __get_user_asm_ret(__gu_val,uw,addr,retval); break; \ +case 8: __get_user_asm_ret(__gu_val,x,addr,retval); break; \ +default: if (__get_user_bad()) return retval; \ +} data = (type) __gu_val; }) + +#define __get_user_asm(x,size,addr,ret) \ +__asm__ __volatile__( \ + "/* Get user asm, inline. */\n" \ +"1:\t" "ld"#size "a [%2] %%asi, %1\n\t" \ + "clr %0\n" \ +"2:\n\n\t" \ + ".section .fixup,#alloc,#execinstr\n\t" \ + ".align 4\n" \ +"3:\n\t" \ + "sethi %%hi(2b), %0\n\t" \ + "clr %1\n\t" \ + "jmpl %0 + %%lo(2b), %%g0\n\t" \ + " mov %3, %0\n\n\t" \ + ".previous\n\t" \ + ".section __ex_table,\"a\"\n\t" \ + ".align 4\n\t" \ + ".word 1b, 3b\n\n\t" \ + ".previous\n\t" \ + : "=r" (ret), "=r" (x) : "r" (__m(addr)), \ + "i" (-EFAULT)) + +#define __get_user_asm_ret(x,size,addr,retval) \ +if (__builtin_constant_p(retval) && retval == -EFAULT) \ +__asm__ __volatile__( \ + "/* Get user asm ret, inline. */\n" \ +"1:\t" "ld"#size "a [%1] %%asi, %0\n\n\t" \ + ".section __ex_table,\"a\"\n\t" \ + ".align 4\n\t" \ + ".word 1b,__ret_efault\n\n\t" \ + ".previous\n\t" \ + : "=r" (x) : "r" (__m(addr))); \ +else \ +__asm__ __volatile__( \ + "/* Get user asm ret, inline. */\n" \ +"1:\t" "ld"#size "a [%1] %%asi, %0\n\n\t" \ + ".section .fixup,#alloc,#execinstr\n\t" \ + ".align 4\n" \ +"3:\n\t" \ + "ret\n\t" \ + " restore %%g0, %2, %%o0\n\n\t" \ + ".previous\n\t" \ + ".section __ex_table,\"a\"\n\t" \ + ".align 4\n\t" \ + ".word 1b, 3b\n\n\t" \ + ".previous\n\t" \ + : "=r" (x) : "r" (__m(addr)), "i" (retval)) + +extern int __get_user_bad(void); + +extern unsigned long __must_check ___copy_from_user(void *to, + const void __user *from, + unsigned long size); +extern unsigned long copy_from_user_fixup(void *to, const void __user *from, + unsigned long size); +static inline unsigned long __must_check +copy_from_user(void *to, const void __user *from, unsigned long size) +{ + unsigned long ret = ___copy_from_user(to, from, size); + + if (unlikely(ret)) + ret = copy_from_user_fixup(to, from, size); + return ret; +} +#define __copy_from_user copy_from_user + +extern unsigned long __must_check ___copy_to_user(void __user *to, + const void *from, + unsigned long size); +extern unsigned long copy_to_user_fixup(void __user *to, const void *from, + unsigned long size); +static inline unsigned long __must_check +copy_to_user(void __user *to, const void *from, unsigned long size) +{ + unsigned long ret = ___copy_to_user(to, from, size); + + if (unlikely(ret)) + ret = copy_to_user_fixup(to, from, size); + return ret; +} +#define __copy_to_user copy_to_user + +extern unsigned long __must_check ___copy_in_user(void __user *to, + const void __user *from, + unsigned long size); +extern unsigned long copy_in_user_fixup(void __user *to, void __user *from, + unsigned long size); +static inline unsigned long __must_check +copy_in_user(void __user *to, void __user *from, unsigned long size) +{ + unsigned long ret = ___copy_in_user(to, from, size); + + if (unlikely(ret)) + ret = copy_in_user_fixup(to, from, size); + return ret; +} +#define __copy_in_user copy_in_user + +extern unsigned long __must_check __clear_user(void __user *, unsigned long); + +#define clear_user __clear_user + +extern long __must_check __strncpy_from_user(char *dest, const char __user *src, long count); + +#define strncpy_from_user __strncpy_from_user + +extern long __strlen_user(const char __user *); +extern long __strnlen_user(const char __user *, long len); + +#define strlen_user __strlen_user +#define strnlen_user __strnlen_user +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UACCESS_H */ diff --git a/arch/sparc/include/asm/uctx.h b/arch/sparc/include/asm/uctx.h new file mode 100644 index 00000000000..dc937c75ffd --- /dev/null +++ b/arch/sparc/include/asm/uctx.h @@ -0,0 +1,71 @@ +/* + * uctx.h: Sparc64 {set,get}context() register state layouts. + * + * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef __SPARC64_UCTX_H +#define __SPARC64_UCTX_H + +#define MC_TSTATE 0 +#define MC_PC 1 +#define MC_NPC 2 +#define MC_Y 3 +#define MC_G1 4 +#define MC_G2 5 +#define MC_G3 6 +#define MC_G4 7 +#define MC_G5 8 +#define MC_G6 9 +#define MC_G7 10 +#define MC_O0 11 +#define MC_O1 12 +#define MC_O2 13 +#define MC_O3 14 +#define MC_O4 15 +#define MC_O5 16 +#define MC_O6 17 +#define MC_O7 18 +#define MC_NGREG 19 + +typedef unsigned long mc_greg_t; +typedef mc_greg_t mc_gregset_t[MC_NGREG]; + +#define MC_MAXFPQ 16 +struct mc_fq { + unsigned long *mcfq_addr; + unsigned int mcfq_insn; +}; + +struct mc_fpu { + union { + unsigned int sregs[32]; + unsigned long dregs[32]; + long double qregs[16]; + } mcfpu_fregs; + unsigned long mcfpu_fsr; + unsigned long mcfpu_fprs; + unsigned long mcfpu_gsr; + struct mc_fq *mcfpu_fq; + unsigned char mcfpu_qcnt; + unsigned char mcfpu_qentsz; + unsigned char mcfpu_enab; +}; +typedef struct mc_fpu mc_fpu_t; + +typedef struct { + mc_gregset_t mc_gregs; + mc_greg_t mc_fp; + mc_greg_t mc_i7; + mc_fpu_t mc_fpregs; +} mcontext_t; + +struct ucontext { + struct ucontext *uc_link; + unsigned long uc_flags; + sigset_t uc_sigmask; + mcontext_t uc_mcontext; +}; +typedef struct ucontext ucontext_t; + +#endif /* __SPARC64_UCTX_H */ diff --git a/arch/sparc/include/asm/unaligned.h b/arch/sparc/include/asm/unaligned.h new file mode 100644 index 00000000000..11d2d5fb590 --- /dev/null +++ b/arch/sparc/include/asm/unaligned.h @@ -0,0 +1,10 @@ +#ifndef _ASM_SPARC_UNALIGNED_H +#define _ASM_SPARC_UNALIGNED_H + +#include <linux/unaligned/be_struct.h> +#include <linux/unaligned/le_byteshift.h> +#include <linux/unaligned/generic.h> +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#endif /* _ASM_SPARC_UNALIGNED_H */ diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h new file mode 100644 index 00000000000..4207fb362da --- /dev/null +++ b/arch/sparc/include/asm/unistd.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_UNISTD_H +#define ___ASM_SPARC_UNISTD_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/unistd_64.h> +#else +#include <asm/unistd_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/unistd_32.h b/arch/sparc/include/asm/unistd_32.h new file mode 100644 index 00000000000..648643a9f13 --- /dev/null +++ b/arch/sparc/include/asm/unistd_32.h @@ -0,0 +1,384 @@ +#ifndef _SPARC_UNISTD_H +#define _SPARC_UNISTD_H + +/* + * System calls under the Sparc. + * + * Don't be scared by the ugly clobbers, it is the only way I can + * think of right now to force the arguments into fixed registers + * before the trap into the system call with gcc 'asm' statements. + * + * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net) + * + * SunOS compatibility based upon preliminary work which is: + * + * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu) + */ + +#define __NR_restart_syscall 0 /* Linux Specific */ +#define __NR_exit 1 /* Common */ +#define __NR_fork 2 /* Common */ +#define __NR_read 3 /* Common */ +#define __NR_write 4 /* Common */ +#define __NR_open 5 /* Common */ +#define __NR_close 6 /* Common */ +#define __NR_wait4 7 /* Common */ +#define __NR_creat 8 /* Common */ +#define __NR_link 9 /* Common */ +#define __NR_unlink 10 /* Common */ +#define __NR_execv 11 /* SunOS Specific */ +#define __NR_chdir 12 /* Common */ +#define __NR_chown 13 /* Common */ +#define __NR_mknod 14 /* Common */ +#define __NR_chmod 15 /* Common */ +#define __NR_lchown 16 /* Common */ +#define __NR_brk 17 /* Common */ +#define __NR_perfctr 18 /* Performance counter operations */ +#define __NR_lseek 19 /* Common */ +#define __NR_getpid 20 /* Common */ +#define __NR_capget 21 /* Linux Specific */ +#define __NR_capset 22 /* Linux Specific */ +#define __NR_setuid 23 /* Implemented via setreuid in SunOS */ +#define __NR_getuid 24 /* Common */ +#define __NR_vmsplice 25 /* ENOSYS under SunOS */ +#define __NR_ptrace 26 /* Common */ +#define __NR_alarm 27 /* Implemented via setitimer in SunOS */ +#define __NR_sigaltstack 28 /* Common */ +#define __NR_pause 29 /* Is sigblock(0)->sigpause() in SunOS */ +#define __NR_utime 30 /* Implemented via utimes() under SunOS */ +#define __NR_lchown32 31 /* Linux sparc32 specific */ +#define __NR_fchown32 32 /* Linux sparc32 specific */ +#define __NR_access 33 /* Common */ +#define __NR_nice 34 /* Implemented via get/setpriority() in SunOS */ +#define __NR_chown32 35 /* Linux sparc32 specific */ +#define __NR_sync 36 /* Common */ +#define __NR_kill 37 /* Common */ +#define __NR_stat 38 /* Common */ +#define __NR_sendfile 39 /* Linux Specific */ +#define __NR_lstat 40 /* Common */ +#define __NR_dup 41 /* Common */ +#define __NR_pipe 42 /* Common */ +#define __NR_times 43 /* Implemented via getrusage() in SunOS */ +#define __NR_getuid32 44 /* Linux sparc32 specific */ +#define __NR_umount2 45 /* Linux Specific */ +#define __NR_setgid 46 /* Implemented via setregid() in SunOS */ +#define __NR_getgid 47 /* Common */ +#define __NR_signal 48 /* Implemented via sigvec() in SunOS */ +#define __NR_geteuid 49 /* SunOS calls getuid() */ +#define __NR_getegid 50 /* SunOS calls getgid() */ +#define __NR_acct 51 /* Common */ +/* #define __NR_memory_ordering 52 Linux sparc64 specific */ +#define __NR_getgid32 53 /* Linux sparc32 specific */ +#define __NR_ioctl 54 /* Common */ +#define __NR_reboot 55 /* Common */ +#define __NR_mmap2 56 /* Linux sparc32 Specific */ +#define __NR_symlink 57 /* Common */ +#define __NR_readlink 58 /* Common */ +#define __NR_execve 59 /* Common */ +#define __NR_umask 60 /* Common */ +#define __NR_chroot 61 /* Common */ +#define __NR_fstat 62 /* Common */ +#define __NR_fstat64 63 /* Linux Specific */ +#define __NR_getpagesize 64 /* Common */ +#define __NR_msync 65 /* Common in newer 1.3.x revs... */ +#define __NR_vfork 66 /* Common */ +#define __NR_pread64 67 /* Linux Specific */ +#define __NR_pwrite64 68 /* Linux Specific */ +#define __NR_geteuid32 69 /* Linux sparc32, sbrk under SunOS */ +#define __NR_getegid32 70 /* Linux sparc32, sstk under SunOS */ +#define __NR_mmap 71 /* Common */ +#define __NR_setreuid32 72 /* Linux sparc32, vadvise under SunOS */ +#define __NR_munmap 73 /* Common */ +#define __NR_mprotect 74 /* Common */ +#define __NR_madvise 75 /* Common */ +#define __NR_vhangup 76 /* Common */ +#define __NR_truncate64 77 /* Linux sparc32 Specific */ +#define __NR_mincore 78 /* Common */ +#define __NR_getgroups 79 /* Common */ +#define __NR_setgroups 80 /* Common */ +#define __NR_getpgrp 81 /* Common */ +#define __NR_setgroups32 82 /* Linux sparc32, setpgrp under SunOS */ +#define __NR_setitimer 83 /* Common */ +#define __NR_ftruncate64 84 /* Linux sparc32 Specific */ +#define __NR_swapon 85 /* Common */ +#define __NR_getitimer 86 /* Common */ +#define __NR_setuid32 87 /* Linux sparc32, gethostname under SunOS */ +#define __NR_sethostname 88 /* Common */ +#define __NR_setgid32 89 /* Linux sparc32, getdtablesize under SunOS */ +#define __NR_dup2 90 /* Common */ +#define __NR_setfsuid32 91 /* Linux sparc32, getdopt under SunOS */ +#define __NR_fcntl 92 /* Common */ +#define __NR_select 93 /* Common */ +#define __NR_setfsgid32 94 /* Linux sparc32, setdopt under SunOS */ +#define __NR_fsync 95 /* Common */ +#define __NR_setpriority 96 /* Common */ +#define __NR_socket 97 /* Common */ +#define __NR_connect 98 /* Common */ +#define __NR_accept 99 /* Common */ +#define __NR_getpriority 100 /* Common */ +#define __NR_rt_sigreturn 101 /* Linux Specific */ +#define __NR_rt_sigaction 102 /* Linux Specific */ +#define __NR_rt_sigprocmask 103 /* Linux Specific */ +#define __NR_rt_sigpending 104 /* Linux Specific */ +#define __NR_rt_sigtimedwait 105 /* Linux Specific */ +#define __NR_rt_sigqueueinfo 106 /* Linux Specific */ +#define __NR_rt_sigsuspend 107 /* Linux Specific */ +#define __NR_setresuid32 108 /* Linux Specific, sigvec under SunOS */ +#define __NR_getresuid32 109 /* Linux Specific, sigblock under SunOS */ +#define __NR_setresgid32 110 /* Linux Specific, sigsetmask under SunOS */ +#define __NR_getresgid32 111 /* Linux Specific, sigpause under SunOS */ +#define __NR_setregid32 112 /* Linux sparc32, sigstack under SunOS */ +#define __NR_recvmsg 113 /* Common */ +#define __NR_sendmsg 114 /* Common */ +#define __NR_getgroups32 115 /* Linux sparc32, vtrace under SunOS */ +#define __NR_gettimeofday 116 /* Common */ +#define __NR_getrusage 117 /* Common */ +#define __NR_getsockopt 118 /* Common */ +#define __NR_getcwd 119 /* Linux Specific */ +#define __NR_readv 120 /* Common */ +#define __NR_writev 121 /* Common */ +#define __NR_settimeofday 122 /* Common */ +#define __NR_fchown 123 /* Common */ +#define __NR_fchmod 124 /* Common */ +#define __NR_recvfrom 125 /* Common */ +#define __NR_setreuid 126 /* Common */ +#define __NR_setregid 127 /* Common */ +#define __NR_rename 128 /* Common */ +#define __NR_truncate 129 /* Common */ +#define __NR_ftruncate 130 /* Common */ +#define __NR_flock 131 /* Common */ +#define __NR_lstat64 132 /* Linux Specific */ +#define __NR_sendto 133 /* Common */ +#define __NR_shutdown 134 /* Common */ +#define __NR_socketpair 135 /* Common */ +#define __NR_mkdir 136 /* Common */ +#define __NR_rmdir 137 /* Common */ +#define __NR_utimes 138 /* SunOS Specific */ +#define __NR_stat64 139 /* Linux Specific */ +#define __NR_sendfile64 140 /* adjtime under SunOS */ +#define __NR_getpeername 141 /* Common */ +#define __NR_futex 142 /* gethostid under SunOS */ +#define __NR_gettid 143 /* ENOSYS under SunOS */ +#define __NR_getrlimit 144 /* Common */ +#define __NR_setrlimit 145 /* Common */ +#define __NR_pivot_root 146 /* Linux Specific, killpg under SunOS */ +#define __NR_prctl 147 /* ENOSYS under SunOS */ +#define __NR_pciconfig_read 148 /* ENOSYS under SunOS */ +#define __NR_pciconfig_write 149 /* ENOSYS under SunOS */ +#define __NR_getsockname 150 /* Common */ +#define __NR_inotify_init 151 /* Linux specific */ +#define __NR_inotify_add_watch 152 /* Linux specific */ +#define __NR_poll 153 /* Common */ +#define __NR_getdents64 154 /* Linux specific */ +#define __NR_fcntl64 155 /* Linux sparc32 Specific */ +#define __NR_inotify_rm_watch 156 /* Linux specific */ +#define __NR_statfs 157 /* Common */ +#define __NR_fstatfs 158 /* Common */ +#define __NR_umount 159 /* Common */ +#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS */ +#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS */ +#define __NR_getdomainname 162 /* SunOS Specific */ +#define __NR_setdomainname 163 /* Common */ +/* #define __NR_utrap_install 164 Linux sparc64 specific */ +#define __NR_quotactl 165 /* Common */ +#define __NR_set_tid_address 166 /* Linux specific, exportfs under SunOS */ +#define __NR_mount 167 /* Common */ +#define __NR_ustat 168 /* Common */ +#define __NR_setxattr 169 /* SunOS: semsys */ +#define __NR_lsetxattr 170 /* SunOS: msgsys */ +#define __NR_fsetxattr 171 /* SunOS: shmsys */ +#define __NR_getxattr 172 /* SunOS: auditsys */ +#define __NR_lgetxattr 173 /* SunOS: rfssys */ +#define __NR_getdents 174 /* Common */ +#define __NR_setsid 175 /* Common */ +#define __NR_fchdir 176 /* Common */ +#define __NR_fgetxattr 177 /* SunOS: fchroot */ +#define __NR_listxattr 178 /* SunOS: vpixsys */ +#define __NR_llistxattr 179 /* SunOS: aioread */ +#define __NR_flistxattr 180 /* SunOS: aiowrite */ +#define __NR_removexattr 181 /* SunOS: aiowait */ +#define __NR_lremovexattr 182 /* SunOS: aiocancel */ +#define __NR_sigpending 183 /* Common */ +#define __NR_query_module 184 /* Linux Specific */ +#define __NR_setpgid 185 /* Common */ +#define __NR_fremovexattr 186 /* SunOS: pathconf */ +#define __NR_tkill 187 /* SunOS: fpathconf */ +#define __NR_exit_group 188 /* Linux specific, sysconf undef SunOS */ +#define __NR_uname 189 /* Linux Specific */ +#define __NR_init_module 190 /* Linux Specific */ +#define __NR_personality 191 /* Linux Specific */ +#define __NR_remap_file_pages 192 /* Linux Specific */ +#define __NR_epoll_create 193 /* Linux Specific */ +#define __NR_epoll_ctl 194 /* Linux Specific */ +#define __NR_epoll_wait 195 /* Linux Specific */ +#define __NR_ioprio_set 196 /* Linux Specific */ +#define __NR_getppid 197 /* Linux Specific */ +#define __NR_sigaction 198 /* Linux Specific */ +#define __NR_sgetmask 199 /* Linux Specific */ +#define __NR_ssetmask 200 /* Linux Specific */ +#define __NR_sigsuspend 201 /* Linux Specific */ +#define __NR_oldlstat 202 /* Linux Specific */ +#define __NR_uselib 203 /* Linux Specific */ +#define __NR_readdir 204 /* Linux Specific */ +#define __NR_readahead 205 /* Linux Specific */ +#define __NR_socketcall 206 /* Linux Specific */ +#define __NR_syslog 207 /* Linux Specific */ +#define __NR_lookup_dcookie 208 /* Linux Specific */ +#define __NR_fadvise64 209 /* Linux Specific */ +#define __NR_fadvise64_64 210 /* Linux Specific */ +#define __NR_tgkill 211 /* Linux Specific */ +#define __NR_waitpid 212 /* Linux Specific */ +#define __NR_swapoff 213 /* Linux Specific */ +#define __NR_sysinfo 214 /* Linux Specific */ +#define __NR_ipc 215 /* Linux Specific */ +#define __NR_sigreturn 216 /* Linux Specific */ +#define __NR_clone 217 /* Linux Specific */ +#define __NR_ioprio_get 218 /* Linux Specific */ +#define __NR_adjtimex 219 /* Linux Specific */ +#define __NR_sigprocmask 220 /* Linux Specific */ +#define __NR_create_module 221 /* Linux Specific */ +#define __NR_delete_module 222 /* Linux Specific */ +#define __NR_get_kernel_syms 223 /* Linux Specific */ +#define __NR_getpgid 224 /* Linux Specific */ +#define __NR_bdflush 225 /* Linux Specific */ +#define __NR_sysfs 226 /* Linux Specific */ +#define __NR_afs_syscall 227 /* Linux Specific */ +#define __NR_setfsuid 228 /* Linux Specific */ +#define __NR_setfsgid 229 /* Linux Specific */ +#define __NR__newselect 230 /* Linux Specific */ +#define __NR_time 231 /* Linux Specific */ +#define __NR_splice 232 /* Linux Specific */ +#define __NR_stime 233 /* Linux Specific */ +#define __NR_statfs64 234 /* Linux Specific */ +#define __NR_fstatfs64 235 /* Linux Specific */ +#define __NR__llseek 236 /* Linux Specific */ +#define __NR_mlock 237 +#define __NR_munlock 238 +#define __NR_mlockall 239 +#define __NR_munlockall 240 +#define __NR_sched_setparam 241 +#define __NR_sched_getparam 242 +#define __NR_sched_setscheduler 243 +#define __NR_sched_getscheduler 244 +#define __NR_sched_yield 245 +#define __NR_sched_get_priority_max 246 +#define __NR_sched_get_priority_min 247 +#define __NR_sched_rr_get_interval 248 +#define __NR_nanosleep 249 +#define __NR_mremap 250 +#define __NR__sysctl 251 +#define __NR_getsid 252 +#define __NR_fdatasync 253 +#define __NR_nfsservctl 254 +#define __NR_sync_file_range 255 +#define __NR_clock_settime 256 +#define __NR_clock_gettime 257 +#define __NR_clock_getres 258 +#define __NR_clock_nanosleep 259 +#define __NR_sched_getaffinity 260 +#define __NR_sched_setaffinity 261 +#define __NR_timer_settime 262 +#define __NR_timer_gettime 263 +#define __NR_timer_getoverrun 264 +#define __NR_timer_delete 265 +#define __NR_timer_create 266 +/* #define __NR_vserver 267 Reserved for VSERVER */ +#define __NR_io_setup 268 +#define __NR_io_destroy 269 +#define __NR_io_submit 270 +#define __NR_io_cancel 271 +#define __NR_io_getevents 272 +#define __NR_mq_open 273 +#define __NR_mq_unlink 274 +#define __NR_mq_timedsend 275 +#define __NR_mq_timedreceive 276 +#define __NR_mq_notify 277 +#define __NR_mq_getsetattr 278 +#define __NR_waitid 279 +#define __NR_tee 280 +#define __NR_add_key 281 +#define __NR_request_key 282 +#define __NR_keyctl 283 +#define __NR_openat 284 +#define __NR_mkdirat 285 +#define __NR_mknodat 286 +#define __NR_fchownat 287 +#define __NR_futimesat 288 +#define __NR_fstatat64 289 +#define __NR_unlinkat 290 +#define __NR_renameat 291 +#define __NR_linkat 292 +#define __NR_symlinkat 293 +#define __NR_readlinkat 294 +#define __NR_fchmodat 295 +#define __NR_faccessat 296 +#define __NR_pselect6 297 +#define __NR_ppoll 298 +#define __NR_unshare 299 +#define __NR_set_robust_list 300 +#define __NR_get_robust_list 301 +#define __NR_migrate_pages 302 +#define __NR_mbind 303 +#define __NR_get_mempolicy 304 +#define __NR_set_mempolicy 305 +#define __NR_kexec_load 306 +#define __NR_move_pages 307 +#define __NR_getcpu 308 +#define __NR_epoll_pwait 309 +#define __NR_utimensat 310 +#define __NR_signalfd 311 +#define __NR_timerfd_create 312 +#define __NR_eventfd 313 +#define __NR_fallocate 314 +#define __NR_timerfd_settime 315 +#define __NR_timerfd_gettime 316 +#define __NR_signalfd4 317 +#define __NR_eventfd2 318 +#define __NR_epoll_create1 319 +#define __NR_dup3 320 +#define __NR_pipe2 321 +#define __NR_inotify_init1 322 + +#define NR_SYSCALLS 323 + +/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants, + * it never had the plain ones and there is no value to adding those + * old versions into the syscall table. + */ +#define __IGNORE_setresuid +#define __IGNORE_getresuid +#define __IGNORE_setresgid +#define __IGNORE_getresgid + +#ifdef __KERNEL__ +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGSUSPEND + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") + +#endif /* __KERNEL__ */ +#endif /* _SPARC_UNISTD_H */ diff --git a/arch/sparc/include/asm/unistd_64.h b/arch/sparc/include/asm/unistd_64.h new file mode 100644 index 00000000000..c5cc0e05232 --- /dev/null +++ b/arch/sparc/include/asm/unistd_64.h @@ -0,0 +1,379 @@ +#ifndef _SPARC64_UNISTD_H +#define _SPARC64_UNISTD_H + +/* + * System calls under the Sparc. + * + * Don't be scared by the ugly clobbers, it is the only way I can + * think of right now to force the arguments into fixed registers + * before the trap into the system call with gcc 'asm' statements. + * + * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net) + * + * SunOS compatibility based upon preliminary work which is: + * + * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu) + */ + +#define __NR_restart_syscall 0 /* Linux Specific */ +#define __NR_exit 1 /* Common */ +#define __NR_fork 2 /* Common */ +#define __NR_read 3 /* Common */ +#define __NR_write 4 /* Common */ +#define __NR_open 5 /* Common */ +#define __NR_close 6 /* Common */ +#define __NR_wait4 7 /* Common */ +#define __NR_creat 8 /* Common */ +#define __NR_link 9 /* Common */ +#define __NR_unlink 10 /* Common */ +#define __NR_execv 11 /* SunOS Specific */ +#define __NR_chdir 12 /* Common */ +#define __NR_chown 13 /* Common */ +#define __NR_mknod 14 /* Common */ +#define __NR_chmod 15 /* Common */ +#define __NR_lchown 16 /* Common */ +#define __NR_brk 17 /* Common */ +#define __NR_perfctr 18 /* Performance counter operations */ +#define __NR_lseek 19 /* Common */ +#define __NR_getpid 20 /* Common */ +#define __NR_capget 21 /* Linux Specific */ +#define __NR_capset 22 /* Linux Specific */ +#define __NR_setuid 23 /* Implemented via setreuid in SunOS */ +#define __NR_getuid 24 /* Common */ +#define __NR_vmsplice 25 /* ENOSYS under SunOS */ +#define __NR_ptrace 26 /* Common */ +#define __NR_alarm 27 /* Implemented via setitimer in SunOS */ +#define __NR_sigaltstack 28 /* Common */ +#define __NR_pause 29 /* Is sigblock(0)->sigpause() in SunOS */ +#define __NR_utime 30 /* Implemented via utimes() under SunOS */ +/* #define __NR_lchown32 31 Linux sparc32 specific */ +/* #define __NR_fchown32 32 Linux sparc32 specific */ +#define __NR_access 33 /* Common */ +#define __NR_nice 34 /* Implemented via get/setpriority() in SunOS */ +/* #define __NR_chown32 35 Linux sparc32 specific */ +#define __NR_sync 36 /* Common */ +#define __NR_kill 37 /* Common */ +#define __NR_stat 38 /* Common */ +#define __NR_sendfile 39 /* Linux Specific */ +#define __NR_lstat 40 /* Common */ +#define __NR_dup 41 /* Common */ +#define __NR_pipe 42 /* Common */ +#define __NR_times 43 /* Implemented via getrusage() in SunOS */ +/* #define __NR_getuid32 44 Linux sparc32 specific */ +#define __NR_umount2 45 /* Linux Specific */ +#define __NR_setgid 46 /* Implemented via setregid() in SunOS */ +#define __NR_getgid 47 /* Common */ +#define __NR_signal 48 /* Implemented via sigvec() in SunOS */ +#define __NR_geteuid 49 /* SunOS calls getuid() */ +#define __NR_getegid 50 /* SunOS calls getgid() */ +#define __NR_acct 51 /* Common */ +#define __NR_memory_ordering 52 /* Linux Specific */ +/* #define __NR_getgid32 53 Linux sparc32 specific */ +#define __NR_ioctl 54 /* Common */ +#define __NR_reboot 55 /* Common */ +/* #define __NR_mmap2 56 Linux sparc32 Specific */ +#define __NR_symlink 57 /* Common */ +#define __NR_readlink 58 /* Common */ +#define __NR_execve 59 /* Common */ +#define __NR_umask 60 /* Common */ +#define __NR_chroot 61 /* Common */ +#define __NR_fstat 62 /* Common */ +#define __NR_fstat64 63 /* Linux Specific */ +#define __NR_getpagesize 64 /* Common */ +#define __NR_msync 65 /* Common in newer 1.3.x revs... */ +#define __NR_vfork 66 /* Common */ +#define __NR_pread64 67 /* Linux Specific */ +#define __NR_pwrite64 68 /* Linux Specific */ +/* #define __NR_geteuid32 69 Linux sparc32, sbrk under SunOS */ +/* #define __NR_getegid32 70 Linux sparc32, sstk under SunOS */ +#define __NR_mmap 71 /* Common */ +/* #define __NR_setreuid32 72 Linux sparc32, vadvise under SunOS */ +#define __NR_munmap 73 /* Common */ +#define __NR_mprotect 74 /* Common */ +#define __NR_madvise 75 /* Common */ +#define __NR_vhangup 76 /* Common */ +/* #define __NR_truncate64 77 Linux sparc32 Specific */ +#define __NR_mincore 78 /* Common */ +#define __NR_getgroups 79 /* Common */ +#define __NR_setgroups 80 /* Common */ +#define __NR_getpgrp 81 /* Common */ +/* #define __NR_setgroups32 82 Linux sparc32, setpgrp under SunOS */ +#define __NR_setitimer 83 /* Common */ +/* #define __NR_ftruncate64 84 Linux sparc32 Specific */ +#define __NR_swapon 85 /* Common */ +#define __NR_getitimer 86 /* Common */ +/* #define __NR_setuid32 87 Linux sparc32, gethostname under SunOS */ +#define __NR_sethostname 88 /* Common */ +/* #define __NR_setgid32 89 Linux sparc32, getdtablesize under SunOS */ +#define __NR_dup2 90 /* Common */ +/* #define __NR_setfsuid32 91 Linux sparc32, getdopt under SunOS */ +#define __NR_fcntl 92 /* Common */ +#define __NR_select 93 /* Common */ +/* #define __NR_setfsgid32 94 Linux sparc32, setdopt under SunOS */ +#define __NR_fsync 95 /* Common */ +#define __NR_setpriority 96 /* Common */ +#define __NR_socket 97 /* Common */ +#define __NR_connect 98 /* Common */ +#define __NR_accept 99 /* Common */ +#define __NR_getpriority 100 /* Common */ +#define __NR_rt_sigreturn 101 /* Linux Specific */ +#define __NR_rt_sigaction 102 /* Linux Specific */ +#define __NR_rt_sigprocmask 103 /* Linux Specific */ +#define __NR_rt_sigpending 104 /* Linux Specific */ +#define __NR_rt_sigtimedwait 105 /* Linux Specific */ +#define __NR_rt_sigqueueinfo 106 /* Linux Specific */ +#define __NR_rt_sigsuspend 107 /* Linux Specific */ +#define __NR_setresuid 108 /* Linux Specific, sigvec under SunOS */ +#define __NR_getresuid 109 /* Linux Specific, sigblock under SunOS */ +#define __NR_setresgid 110 /* Linux Specific, sigsetmask under SunOS */ +#define __NR_getresgid 111 /* Linux Specific, sigpause under SunOS */ +/* #define __NR_setregid32 75 Linux sparc32, sigstack under SunOS */ +#define __NR_recvmsg 113 /* Common */ +#define __NR_sendmsg 114 /* Common */ +/* #define __NR_getgroups32 115 Linux sparc32, vtrace under SunOS */ +#define __NR_gettimeofday 116 /* Common */ +#define __NR_getrusage 117 /* Common */ +#define __NR_getsockopt 118 /* Common */ +#define __NR_getcwd 119 /* Linux Specific */ +#define __NR_readv 120 /* Common */ +#define __NR_writev 121 /* Common */ +#define __NR_settimeofday 122 /* Common */ +#define __NR_fchown 123 /* Common */ +#define __NR_fchmod 124 /* Common */ +#define __NR_recvfrom 125 /* Common */ +#define __NR_setreuid 126 /* Common */ +#define __NR_setregid 127 /* Common */ +#define __NR_rename 128 /* Common */ +#define __NR_truncate 129 /* Common */ +#define __NR_ftruncate 130 /* Common */ +#define __NR_flock 131 /* Common */ +#define __NR_lstat64 132 /* Linux Specific */ +#define __NR_sendto 133 /* Common */ +#define __NR_shutdown 134 /* Common */ +#define __NR_socketpair 135 /* Common */ +#define __NR_mkdir 136 /* Common */ +#define __NR_rmdir 137 /* Common */ +#define __NR_utimes 138 /* SunOS Specific */ +#define __NR_stat64 139 /* Linux Specific */ +#define __NR_sendfile64 140 /* adjtime under SunOS */ +#define __NR_getpeername 141 /* Common */ +#define __NR_futex 142 /* gethostid under SunOS */ +#define __NR_gettid 143 /* ENOSYS under SunOS */ +#define __NR_getrlimit 144 /* Common */ +#define __NR_setrlimit 145 /* Common */ +#define __NR_pivot_root 146 /* Linux Specific, killpg under SunOS */ +#define __NR_prctl 147 /* ENOSYS under SunOS */ +#define __NR_pciconfig_read 148 /* ENOSYS under SunOS */ +#define __NR_pciconfig_write 149 /* ENOSYS under SunOS */ +#define __NR_getsockname 150 /* Common */ +#define __NR_inotify_init 151 /* Linux specific */ +#define __NR_inotify_add_watch 152 /* Linux specific */ +#define __NR_poll 153 /* Common */ +#define __NR_getdents64 154 /* Linux specific */ +/* #define __NR_fcntl64 155 Linux sparc32 Specific */ +#define __NR_inotify_rm_watch 156 /* Linux specific */ +#define __NR_statfs 157 /* Common */ +#define __NR_fstatfs 158 /* Common */ +#define __NR_umount 159 /* Common */ +#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS */ +#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS */ +#define __NR_getdomainname 162 /* SunOS Specific */ +#define __NR_setdomainname 163 /* Common */ +#define __NR_utrap_install 164 /* SYSV ABI/v9 required */ +#define __NR_quotactl 165 /* Common */ +#define __NR_set_tid_address 166 /* Linux specific, exportfs under SunOS */ +#define __NR_mount 167 /* Common */ +#define __NR_ustat 168 /* Common */ +#define __NR_setxattr 169 /* SunOS: semsys */ +#define __NR_lsetxattr 170 /* SunOS: msgsys */ +#define __NR_fsetxattr 171 /* SunOS: shmsys */ +#define __NR_getxattr 172 /* SunOS: auditsys */ +#define __NR_lgetxattr 173 /* SunOS: rfssys */ +#define __NR_getdents 174 /* Common */ +#define __NR_setsid 175 /* Common */ +#define __NR_fchdir 176 /* Common */ +#define __NR_fgetxattr 177 /* SunOS: fchroot */ +#define __NR_listxattr 178 /* SunOS: vpixsys */ +#define __NR_llistxattr 179 /* SunOS: aioread */ +#define __NR_flistxattr 180 /* SunOS: aiowrite */ +#define __NR_removexattr 181 /* SunOS: aiowait */ +#define __NR_lremovexattr 182 /* SunOS: aiocancel */ +#define __NR_sigpending 183 /* Common */ +#define __NR_query_module 184 /* Linux Specific */ +#define __NR_setpgid 185 /* Common */ +#define __NR_fremovexattr 186 /* SunOS: pathconf */ +#define __NR_tkill 187 /* SunOS: fpathconf */ +#define __NR_exit_group 188 /* Linux specific, sysconf undef SunOS */ +#define __NR_uname 189 /* Linux Specific */ +#define __NR_init_module 190 /* Linux Specific */ +#define __NR_personality 191 /* Linux Specific */ +#define __NR_remap_file_pages 192 /* Linux Specific */ +#define __NR_epoll_create 193 /* Linux Specific */ +#define __NR_epoll_ctl 194 /* Linux Specific */ +#define __NR_epoll_wait 195 /* Linux Specific */ +#define __NR_ioprio_set 196 /* Linux Specific */ +#define __NR_getppid 197 /* Linux Specific */ +#define __NR_sigaction 198 /* Linux Specific */ +#define __NR_sgetmask 199 /* Linux Specific */ +#define __NR_ssetmask 200 /* Linux Specific */ +#define __NR_sigsuspend 201 /* Linux Specific */ +#define __NR_oldlstat 202 /* Linux Specific */ +#define __NR_uselib 203 /* Linux Specific */ +#define __NR_readdir 204 /* Linux Specific */ +#define __NR_readahead 205 /* Linux Specific */ +#define __NR_socketcall 206 /* Linux Specific */ +#define __NR_syslog 207 /* Linux Specific */ +#define __NR_lookup_dcookie 208 /* Linux Specific */ +#define __NR_fadvise64 209 /* Linux Specific */ +#define __NR_fadvise64_64 210 /* Linux Specific */ +#define __NR_tgkill 211 /* Linux Specific */ +#define __NR_waitpid 212 /* Linux Specific */ +#define __NR_swapoff 213 /* Linux Specific */ +#define __NR_sysinfo 214 /* Linux Specific */ +#define __NR_ipc 215 /* Linux Specific */ +#define __NR_sigreturn 216 /* Linux Specific */ +#define __NR_clone 217 /* Linux Specific */ +#define __NR_ioprio_get 218 /* Linux Specific */ +#define __NR_adjtimex 219 /* Linux Specific */ +#define __NR_sigprocmask 220 /* Linux Specific */ +#define __NR_create_module 221 /* Linux Specific */ +#define __NR_delete_module 222 /* Linux Specific */ +#define __NR_get_kernel_syms 223 /* Linux Specific */ +#define __NR_getpgid 224 /* Linux Specific */ +#define __NR_bdflush 225 /* Linux Specific */ +#define __NR_sysfs 226 /* Linux Specific */ +#define __NR_afs_syscall 227 /* Linux Specific */ +#define __NR_setfsuid 228 /* Linux Specific */ +#define __NR_setfsgid 229 /* Linux Specific */ +#define __NR__newselect 230 /* Linux Specific */ +#ifdef __KERNEL__ +#define __NR_time 231 /* Linux sparc32 */ +#endif +#define __NR_splice 232 /* Linux Specific */ +#define __NR_stime 233 /* Linux Specific */ +#define __NR_statfs64 234 /* Linux Specific */ +#define __NR_fstatfs64 235 /* Linux Specific */ +#define __NR__llseek 236 /* Linux Specific */ +#define __NR_mlock 237 +#define __NR_munlock 238 +#define __NR_mlockall 239 +#define __NR_munlockall 240 +#define __NR_sched_setparam 241 +#define __NR_sched_getparam 242 +#define __NR_sched_setscheduler 243 +#define __NR_sched_getscheduler 244 +#define __NR_sched_yield 245 +#define __NR_sched_get_priority_max 246 +#define __NR_sched_get_priority_min 247 +#define __NR_sched_rr_get_interval 248 +#define __NR_nanosleep 249 +#define __NR_mremap 250 +#define __NR__sysctl 251 +#define __NR_getsid 252 +#define __NR_fdatasync 253 +#define __NR_nfsservctl 254 +#define __NR_sync_file_range 255 +#define __NR_clock_settime 256 +#define __NR_clock_gettime 257 +#define __NR_clock_getres 258 +#define __NR_clock_nanosleep 259 +#define __NR_sched_getaffinity 260 +#define __NR_sched_setaffinity 261 +#define __NR_timer_settime 262 +#define __NR_timer_gettime 263 +#define __NR_timer_getoverrun 264 +#define __NR_timer_delete 265 +#define __NR_timer_create 266 +/* #define __NR_vserver 267 Reserved for VSERVER */ +#define __NR_io_setup 268 +#define __NR_io_destroy 269 +#define __NR_io_submit 270 +#define __NR_io_cancel 271 +#define __NR_io_getevents 272 +#define __NR_mq_open 273 +#define __NR_mq_unlink 274 +#define __NR_mq_timedsend 275 +#define __NR_mq_timedreceive 276 +#define __NR_mq_notify 277 +#define __NR_mq_getsetattr 278 +#define __NR_waitid 279 +#define __NR_tee 280 +#define __NR_add_key 281 +#define __NR_request_key 282 +#define __NR_keyctl 283 +#define __NR_openat 284 +#define __NR_mkdirat 285 +#define __NR_mknodat 286 +#define __NR_fchownat 287 +#define __NR_futimesat 288 +#define __NR_fstatat64 289 +#define __NR_unlinkat 290 +#define __NR_renameat 291 +#define __NR_linkat 292 +#define __NR_symlinkat 293 +#define __NR_readlinkat 294 +#define __NR_fchmodat 295 +#define __NR_faccessat 296 +#define __NR_pselect6 297 +#define __NR_ppoll 298 +#define __NR_unshare 299 +#define __NR_set_robust_list 300 +#define __NR_get_robust_list 301 +#define __NR_migrate_pages 302 +#define __NR_mbind 303 +#define __NR_get_mempolicy 304 +#define __NR_set_mempolicy 305 +#define __NR_kexec_load 306 +#define __NR_move_pages 307 +#define __NR_getcpu 308 +#define __NR_epoll_pwait 309 +#define __NR_utimensat 310 +#define __NR_signalfd 311 +#define __NR_timerfd_create 312 +#define __NR_eventfd 313 +#define __NR_fallocate 314 +#define __NR_timerfd_settime 315 +#define __NR_timerfd_gettime 316 +#define __NR_signalfd4 317 +#define __NR_eventfd2 318 +#define __NR_epoll_create1 319 +#define __NR_dup3 320 +#define __NR_pipe2 321 +#define __NR_inotify_init1 322 + +#define NR_SYSCALLS 323 + +#ifdef __KERNEL__ +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_COMPAT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGSUSPEND +#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") + +#endif /* __KERNEL__ */ +#endif /* _SPARC64_UNISTD_H */ diff --git a/arch/sparc/include/asm/upa.h b/arch/sparc/include/asm/upa.h new file mode 100644 index 00000000000..5b1633223f9 --- /dev/null +++ b/arch/sparc/include/asm/upa.h @@ -0,0 +1,109 @@ +#ifndef _SPARC64_UPA_H +#define _SPARC64_UPA_H + +#include <asm/asi.h> + +/* UPA level registers and defines. */ + +/* UPA Config Register */ +#define UPA_CONFIG_RESV 0xffffffffc0000000 /* Reserved. */ +#define UPA_CONFIG_PCON 0x000000003fc00000 /* Depth of various sys queues. */ +#define UPA_CONFIG_MID 0x00000000003e0000 /* Module ID. */ +#define UPA_CONFIG_PCAP 0x000000000001ffff /* Port Capabilities. */ + +/* UPA Port ID Register */ +#define UPA_PORTID_FNP 0xff00000000000000 /* Hardcoded to 0xfc on ultra. */ +#define UPA_PORTID_RESV 0x00fffff800000000 /* Reserved. */ +#define UPA_PORTID_ECCVALID 0x0000000400000000 /* Zero if mod can generate ECC */ +#define UPA_PORTID_ONEREAD 0x0000000200000000 /* Set if mod generates P_RASB */ +#define UPA_PORTID_PINTRDQ 0x0000000180000000 /* # outstanding P_INT_REQ's */ +#define UPA_PORTID_PREQDQ 0x000000007e000000 /* slave-wr's to mod supported */ +#define UPA_PORTID_PREQRD 0x0000000001e00000 /* # incoming P_REQ's supported */ +#define UPA_PORTID_UPACAP 0x00000000001f0000 /* UPA capabilities of mod */ +#define UPA_PORTID_ID 0x000000000000ffff /* Module Identification bits */ + +/* UPA I/O space accessors */ +#if defined(__KERNEL__) && !defined(__ASSEMBLY__) +static inline unsigned char _upa_readb(unsigned long addr) +{ + unsigned char ret; + + __asm__ __volatile__("lduba\t[%1] %2, %0\t/* upa_readb */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + + return ret; +} + +static inline unsigned short _upa_readw(unsigned long addr) +{ + unsigned short ret; + + __asm__ __volatile__("lduha\t[%1] %2, %0\t/* upa_readw */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + + return ret; +} + +static inline unsigned int _upa_readl(unsigned long addr) +{ + unsigned int ret; + + __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* upa_readl */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + + return ret; +} + +static inline unsigned long _upa_readq(unsigned long addr) +{ + unsigned long ret; + + __asm__ __volatile__("ldxa\t[%1] %2, %0\t/* upa_readq */" + : "=r" (ret) + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + + return ret; +} + +static inline void _upa_writeb(unsigned char b, unsigned long addr) +{ + __asm__ __volatile__("stba\t%0, [%1] %2\t/* upa_writeb */" + : /* no outputs */ + : "r" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); +} + +static inline void _upa_writew(unsigned short w, unsigned long addr) +{ + __asm__ __volatile__("stha\t%0, [%1] %2\t/* upa_writew */" + : /* no outputs */ + : "r" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); +} + +static inline void _upa_writel(unsigned int l, unsigned long addr) +{ + __asm__ __volatile__("stwa\t%0, [%1] %2\t/* upa_writel */" + : /* no outputs */ + : "r" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); +} + +static inline void _upa_writeq(unsigned long q, unsigned long addr) +{ + __asm__ __volatile__("stxa\t%0, [%1] %2\t/* upa_writeq */" + : /* no outputs */ + : "r" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); +} + +#define upa_readb(__addr) (_upa_readb((unsigned long)(__addr))) +#define upa_readw(__addr) (_upa_readw((unsigned long)(__addr))) +#define upa_readl(__addr) (_upa_readl((unsigned long)(__addr))) +#define upa_readq(__addr) (_upa_readq((unsigned long)(__addr))) +#define upa_writeb(__b, __addr) (_upa_writeb((__b), (unsigned long)(__addr))) +#define upa_writew(__w, __addr) (_upa_writew((__w), (unsigned long)(__addr))) +#define upa_writel(__l, __addr) (_upa_writel((__l), (unsigned long)(__addr))) +#define upa_writeq(__q, __addr) (_upa_writeq((__q), (unsigned long)(__addr))) +#endif /* __KERNEL__ && !__ASSEMBLY__ */ + +#endif /* !(_SPARC64_UPA_H) */ diff --git a/arch/sparc/include/asm/user.h b/arch/sparc/include/asm/user.h new file mode 100644 index 00000000000..3400ea87f14 --- /dev/null +++ b/arch/sparc/include/asm/user.h @@ -0,0 +1,6 @@ +#ifndef _SPARC_USER_H +#define _SPARC_USER_H + +/* Nothing to define. */ + +#endif /* !(_SPARC_USER_H) */ diff --git a/arch/sparc/include/asm/utrap.h b/arch/sparc/include/asm/utrap.h new file mode 100644 index 00000000000..b10e527c22d --- /dev/null +++ b/arch/sparc/include/asm/utrap.h @@ -0,0 +1,51 @@ +/* + * include/asm/utrap.h + * + * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + */ + +#ifndef __ASM_SPARC64_UTRAP_H +#define __ASM_SPARC64_UTRAP_H + +#define UT_INSTRUCTION_EXCEPTION 1 +#define UT_INSTRUCTION_ERROR 2 +#define UT_INSTRUCTION_PROTECTION 3 +#define UT_ILLTRAP_INSTRUCTION 4 +#define UT_ILLEGAL_INSTRUCTION 5 +#define UT_PRIVILEGED_OPCODE 6 +#define UT_FP_DISABLED 7 +#define UT_FP_EXCEPTION_IEEE_754 8 +#define UT_FP_EXCEPTION_OTHER 9 +#define UT_TAG_OVERVIEW 10 +#define UT_DIVISION_BY_ZERO 11 +#define UT_DATA_EXCEPTION 12 +#define UT_DATA_ERROR 13 +#define UT_DATA_PROTECTION 14 +#define UT_MEM_ADDRESS_NOT_ALIGNED 15 +#define UT_PRIVILEGED_ACTION 16 +#define UT_ASYNC_DATA_ERROR 17 +#define UT_TRAP_INSTRUCTION_16 18 +#define UT_TRAP_INSTRUCTION_17 19 +#define UT_TRAP_INSTRUCTION_18 20 +#define UT_TRAP_INSTRUCTION_19 21 +#define UT_TRAP_INSTRUCTION_20 22 +#define UT_TRAP_INSTRUCTION_21 23 +#define UT_TRAP_INSTRUCTION_22 24 +#define UT_TRAP_INSTRUCTION_23 25 +#define UT_TRAP_INSTRUCTION_24 26 +#define UT_TRAP_INSTRUCTION_25 27 +#define UT_TRAP_INSTRUCTION_26 28 +#define UT_TRAP_INSTRUCTION_27 29 +#define UT_TRAP_INSTRUCTION_28 30 +#define UT_TRAP_INSTRUCTION_29 31 +#define UT_TRAP_INSTRUCTION_30 32 +#define UT_TRAP_INSTRUCTION_31 33 + +#define UTH_NOCHANGE (-1) + +#ifndef __ASSEMBLY__ +typedef int utrap_entry_t; +typedef void *utrap_handler_t; +#endif /* __ASSEMBLY__ */ + +#endif /* !(__ASM_SPARC64_PROCESSOR_H) */ diff --git a/arch/sparc/include/asm/vac-ops.h b/arch/sparc/include/asm/vac-ops.h new file mode 100644 index 00000000000..d10527611f1 --- /dev/null +++ b/arch/sparc/include/asm/vac-ops.h @@ -0,0 +1,134 @@ +#ifndef _SPARC_VAC_OPS_H +#define _SPARC_VAC_OPS_H + +/* vac-ops.h: Inline assembly routines to do operations on the Sparc + * VAC (virtual address cache) for the sun4c. + * + * Copyright (C) 1994, David S. Miller (davem@caip.rutgers.edu) + */ + +#include <asm/sysen.h> +#include <asm/contregs.h> +#include <asm/asi.h> + +/* The SUN4C models have a virtually addressed write-through + * cache. + * + * The cache tags are directly accessible through an ASI and + * each have the form: + * + * ------------------------------------------------------------ + * | MBZ | CONTEXT | WRITE | PRIV | VALID | MBZ | TagID | MBZ | + * ------------------------------------------------------------ + * 31 25 24 22 21 20 19 18 16 15 2 1 0 + * + * MBZ: These bits are either unused and/or reserved and should + * be written as zeroes. + * + * CONTEXT: Records the context to which this cache line belongs. + * + * WRITE: A copy of the writable bit from the mmu pte access bits. + * + * PRIV: A copy of the privileged bit from the pte access bits. + * + * VALID: If set, this line is valid, else invalid. + * + * TagID: Fourteen bits of tag ID. + * + * Every virtual address is seen by the cache like this: + * + * ---------------------------------------- + * | RESV | TagID | LINE | BYTE-in-LINE | + * ---------------------------------------- + * 31 30 29 16 15 4 3 0 + * + * RESV: Unused/reserved. + * + * TagID: Used to match the Tag-ID in that vac tags. + * + * LINE: Which line within the cache + * + * BYTE-in-LINE: Which byte within the cache line. + */ + +/* Sun4c VAC Tags */ +#define S4CVACTAG_CID 0x01c00000 +#define S4CVACTAG_W 0x00200000 +#define S4CVACTAG_P 0x00100000 +#define S4CVACTAG_V 0x00080000 +#define S4CVACTAG_TID 0x0000fffc + +/* Sun4c VAC Virtual Address */ +/* These aren't used, why bother? (Anton) */ +#if 0 +#define S4CVACVA_TID 0x3fff0000 +#define S4CVACVA_LINE 0x0000fff0 +#define S4CVACVA_BIL 0x0000000f +#endif + +/* The indexing of cache lines creates a problem. Because the line + * field of a virtual address extends past the page offset within + * the virtual address it is possible to have what are called + * 'bad aliases' which will create inconsistencies. So we must make + * sure that within a context that if a physical page is mapped + * more than once, that 'extra' line bits are the same. If this is + * not the case, and thus is a 'bad alias' we must turn off the + * cacheable bit in the pte's of all such pages. + */ + +#ifdef CONFIG_SUN4 +#define S4CVAC_BADBITS 0x0001e000 +#else +#define S4CVAC_BADBITS 0x0000f000 +#endif + +/* The following is true if vaddr1 and vaddr2 would cause + * a 'bad alias'. + */ +#define S4CVAC_BADALIAS(vaddr1, vaddr2) \ + ((((unsigned long) (vaddr1)) ^ ((unsigned long) (vaddr2))) & \ + (S4CVAC_BADBITS)) + +/* The following structure describes the characteristics of a sun4c + * VAC as probed from the prom during boot time. + */ +struct sun4c_vac_props { + unsigned int num_bytes; /* Size of the cache */ + unsigned int num_lines; /* Number of cache lines */ + unsigned int do_hwflushes; /* Hardware flushing available? */ + enum { VAC_NONE, VAC_WRITE_THROUGH, + VAC_WRITE_BACK } type; /* What type of VAC? */ + unsigned int linesize; /* Size of each line in bytes */ + unsigned int log2lsize; /* log2(linesize) */ + unsigned int on; /* VAC is enabled */ +}; + +extern struct sun4c_vac_props sun4c_vacinfo; + +/* sun4c_enable_vac() enables the sun4c virtual address cache. */ +static inline void sun4c_enable_vac(void) +{ + __asm__ __volatile__("lduba [%0] %1, %%g1\n\t" + "or %%g1, %2, %%g1\n\t" + "stba %%g1, [%0] %1\n\t" + : /* no outputs */ + : "r" ((unsigned int) AC_SENABLE), + "i" (ASI_CONTROL), "i" (SENABLE_CACHE) + : "g1", "memory"); + sun4c_vacinfo.on = 1; +} + +/* sun4c_disable_vac() disables the virtual address cache. */ +static inline void sun4c_disable_vac(void) +{ + __asm__ __volatile__("lduba [%0] %1, %%g1\n\t" + "andn %%g1, %2, %%g1\n\t" + "stba %%g1, [%0] %1\n\t" + : /* no outputs */ + : "r" ((unsigned int) AC_SENABLE), + "i" (ASI_CONTROL), "i" (SENABLE_CACHE) + : "g1", "memory"); + sun4c_vacinfo.on = 0; +} + +#endif /* !(_SPARC_VAC_OPS_H) */ diff --git a/arch/sparc/include/asm/vaddrs.h b/arch/sparc/include/asm/vaddrs.h new file mode 100644 index 00000000000..541e13755ce --- /dev/null +++ b/arch/sparc/include/asm/vaddrs.h @@ -0,0 +1,64 @@ +#ifndef _SPARC_VADDRS_H +#define _SPARC_VADDRS_H + +#include <asm/head.h> + +/* + * asm/vaddrs.h: Here we define the virtual addresses at + * which important things will be mapped. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 2000 Anton Blanchard (anton@samba.org) + */ + +#define SRMMU_MAXMEM 0x0c000000 + +#define SRMMU_NOCACHE_VADDR (KERNBASE + SRMMU_MAXMEM) + /* = 0x0fc000000 */ +/* XXX Empiricals - this needs to go away - KMW */ +#define SRMMU_MIN_NOCACHE_PAGES (550) +#define SRMMU_MAX_NOCACHE_PAGES (1280) + +/* The following constant is used in mm/srmmu.c::srmmu_nocache_calcsize() + * to determine the amount of memory that will be reserved as nocache: + * + * 256 pages will be taken as nocache per each + * SRMMU_NOCACHE_ALCRATIO MB of system memory. + * + * limits enforced: nocache minimum = 256 pages + * nocache maximum = 1280 pages + */ +#define SRMMU_NOCACHE_ALCRATIO 64 /* 256 pages per 64MB of system RAM */ + +#define SUN4M_IOBASE_VADDR 0xfd000000 /* Base for mapping pages */ +#define IOBASE_VADDR 0xfe000000 +#define IOBASE_END 0xfe600000 + +/* + * On the sun4/4c we need a place + * to reliably map locked down kernel data. This includes the + * task_struct and kernel stack pages of each process plus the + * scsi buffers during dvma IO transfers, also the floppy buffers + * during pseudo dma which runs with traps off (no faults allowed). + * Some quick calculations yield: + * NR_TASKS <512> * (3 * PAGE_SIZE) == 0x600000 + * Subtract this from 0xc00000 and you get 0x927C0 of vm left + * over to map SCSI dvma + floppy pseudo-dma buffers. So be + * careful if you change NR_TASKS or else there won't be enough + * room for it all. + */ +#define SUN4C_LOCK_VADDR 0xff000000 +#define SUN4C_LOCK_END 0xffc00000 + +#define KADB_DEBUGGER_BEGVM 0xffc00000 /* Where kern debugger is in virt-mem */ +#define KADB_DEBUGGER_ENDVM 0xffd00000 +#define DEBUG_FIRSTVADDR KADB_DEBUGGER_BEGVM +#define DEBUG_LASTVADDR KADB_DEBUGGER_ENDVM + +#define LINUX_OPPROM_BEGVM 0xffd00000 +#define LINUX_OPPROM_ENDVM 0xfff00000 + +#define DVMA_VADDR 0xfff00000 /* Base area of the DVMA on suns */ +#define DVMA_END 0xfffc0000 + +#endif /* !(_SPARC_VADDRS_H) */ diff --git a/arch/sparc/include/asm/vfc_ioctls.h b/arch/sparc/include/asm/vfc_ioctls.h new file mode 100644 index 00000000000..af8b69007b2 --- /dev/null +++ b/arch/sparc/include/asm/vfc_ioctls.h @@ -0,0 +1,58 @@ +/* Copyright (c) 1996 by Manish Vachharajani */ + +#ifndef _LINUX_VFC_IOCTLS_H_ +#define _LINUX_VFC_IOCTLS_H_ + + /* IOCTLs */ +#define VFC_IOCTL(a) (('j' << 8) | a) +#define VFCGCTRL (VFC_IOCTL (0)) /* get vfc attributes */ +#define VFCSCTRL (VFC_IOCTL (1)) /* set vfc attributes */ +#define VFCGVID (VFC_IOCTL (2)) /* get video decoder attributes */ +#define VFCSVID (VFC_IOCTL (3)) /* set video decoder attributes */ +#define VFCHUE (VFC_IOCTL (4)) /* set hue */ +#define VFCPORTCHG (VFC_IOCTL (5)) /* change port */ +#define VFCRDINFO (VFC_IOCTL (6)) /* read info */ + + /* Options for setting the vfc attributes and status */ +#define MEMPRST 0x1 /* reset FIFO ptr. */ +#define CAPTRCMD 0x2 /* start capture and wait */ +#define DIAGMODE 0x3 /* diag mode */ +#define NORMMODE 0x4 /* normal mode */ +#define CAPTRSTR 0x5 /* start capture */ +#define CAPTRWAIT 0x6 /* wait for capture to finish */ + + + /* Options for the decoder */ +#define STD_NTSC 0x1 /* NTSC mode */ +#define STD_PAL 0x2 /* PAL mode */ +#define COLOR_ON 0x3 /* force color ON */ +#define MONO 0x4 /* force color OFF */ + + /* Values returned by ioctl 2 */ + +#define NO_LOCK 1 +#define NTSC_COLOR 2 +#define NTSC_NOCOLOR 3 +#define PAL_COLOR 4 +#define PAL_NOCOLOR 5 + +/* Not too sure what this does yet */ + /* Options for setting Field number */ +#define ODD_FIELD 0x1 +#define EVEN_FIELD 0x0 +#define ACTIVE_ONLY 0x2 +#define NON_ACTIVE 0x0 + +/* Debug options */ +#define VFC_I2C_SEND 0 +#define VFC_I2C_RECV 1 + +struct vfc_debug_inout +{ + unsigned long addr; + unsigned long ret; + unsigned long len; + unsigned char __user *buffer; +}; + +#endif /* _LINUX_VFC_IOCTLS_H_ */ diff --git a/arch/sparc/include/asm/vga.h b/arch/sparc/include/asm/vga.h new file mode 100644 index 00000000000..c69d5b2ba19 --- /dev/null +++ b/arch/sparc/include/asm/vga.h @@ -0,0 +1,33 @@ +/* + * Access to VGA videoram + * + * (c) 1998 Martin Mares <mj@ucw.cz> + */ + +#ifndef _LINUX_ASM_VGA_H_ +#define _LINUX_ASM_VGA_H_ + +#include <asm/types.h> + +#define VT_BUF_HAVE_RW + +#undef scr_writew +#undef scr_readw + +static inline void scr_writew(u16 val, u16 *addr) +{ + BUG_ON((long) addr >= 0); + + *addr = val; +} + +static inline u16 scr_readw(const u16 *addr) +{ + BUG_ON((long) addr >= 0); + + return *addr; +} + +#define VGA_MAP_MEM(x,s) (x) + +#endif diff --git a/arch/sparc/include/asm/viking.h b/arch/sparc/include/asm/viking.h new file mode 100644 index 00000000000..989930aeb09 --- /dev/null +++ b/arch/sparc/include/asm/viking.h @@ -0,0 +1,253 @@ +/* + * viking.h: Defines specific to the GNU/Viking MBUS module. + * This is SRMMU stuff. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ +#ifndef _SPARC_VIKING_H +#define _SPARC_VIKING_H + +#include <asm/asi.h> +#include <asm/mxcc.h> +#include <asm/pgtsrmmu.h> + +/* Bits in the SRMMU control register for GNU/Viking modules. + * + * ----------------------------------------------------------- + * |impl-vers| RSV |TC|AC|SP|BM|PC|MBM|SB|IC|DC|PSO|RSV|NF|ME| + * ----------------------------------------------------------- + * 31 24 23-17 16 15 14 13 12 11 10 9 8 7 6-2 1 0 + * + * TC: Tablewalk Cacheable -- 0 = Twalks are not cacheable in E-cache + * 1 = Twalks are cacheable in E-cache + * + * GNU/Viking will only cache tablewalks in the E-cache (mxcc) if present + * and never caches them internally (or so states the docs). Therefore + * for machines lacking an E-cache (ie. in MBUS mode) this bit must + * remain cleared. + * + * AC: Alternate Cacheable -- 0 = Passthru physical accesses not cacheable + * 1 = Passthru physical accesses cacheable + * + * This indicates whether accesses are cacheable when no cachable bit + * is present in the pte when the processor is in boot-mode or the + * access does not need pte's for translation (ie. pass-thru ASI's). + * "Cachable" is only referring to E-cache (if present) and not the + * on chip split I/D caches of the GNU/Viking. + * + * SP: SnooP Enable -- 0 = bus snooping off, 1 = bus snooping on + * + * This enables snooping on the GNU/Viking bus. This must be on + * for the hardware cache consistency mechanisms of the GNU/Viking + * to work at all. On non-mxcc GNU/Viking modules the split I/D + * caches will snoop regardless of whether they are enabled, this + * takes care of the case where the I or D or both caches are turned + * off yet still contain valid data. Note also that this bit does + * not affect GNU/Viking store-buffer snoops, those happen if the + * store-buffer is enabled no matter what. + * + * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode + * + * This indicates whether the GNU/Viking is in boot-mode or not, + * if it is then all instruction fetch physical addresses are + * computed as 0xff0000000 + low 28 bits of requested address. + * GNU/Viking boot-mode does not affect data accesses. Also, + * in boot mode instruction accesses bypass the split on chip I/D + * caches, they may be cached by the GNU/MXCC if present and enabled. + * + * MBM: MBus Mode -- 0 = not in MBus mode, 1 = in MBus mode + * + * This indicated the GNU/Viking configuration present. If in + * MBUS mode, the GNU/Viking lacks a GNU/MXCC E-cache. If it is + * not then the GNU/Viking is on a module VBUS connected directly + * to a GNU/MXCC cache controller. The GNU/MXCC can be thus connected + * to either an GNU/MBUS (sun4m) or the packet-switched GNU/XBus (sun4d). + * + * SB: StoreBuffer enable -- 0 = store buffer off, 1 = store buffer on + * + * The GNU/Viking store buffer allows the chip to continue execution + * after a store even if the data cannot be placed in one of the + * caches during that cycle. If disabled, all stores operations + * occur synchronously. + * + * IC: Instruction Cache -- 0 = off, 1 = on + * DC: Data Cache -- 0 = off, 1 = 0n + * + * These bits enable the on-cpu GNU/Viking split I/D caches. Note, + * as mentioned above, these caches will snoop the bus in GNU/MBUS + * configurations even when disabled to avoid data corruption. + * + * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap + * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating + * + */ + +#define VIKING_MMUENABLE 0x00000001 +#define VIKING_NOFAULT 0x00000002 +#define VIKING_PSO 0x00000080 +#define VIKING_DCENABLE 0x00000100 /* Enable data cache */ +#define VIKING_ICENABLE 0x00000200 /* Enable instruction cache */ +#define VIKING_SBENABLE 0x00000400 /* Enable store buffer */ +#define VIKING_MMODE 0x00000800 /* MBUS mode */ +#define VIKING_PCENABLE 0x00001000 /* Enable parity checking */ +#define VIKING_BMODE 0x00002000 +#define VIKING_SPENABLE 0x00004000 /* Enable bus cache snooping */ +#define VIKING_ACENABLE 0x00008000 /* Enable alternate caching */ +#define VIKING_TCENABLE 0x00010000 /* Enable table-walks to be cached */ +#define VIKING_DPENABLE 0x00040000 /* Enable the data prefetcher */ + +/* + * GNU/Viking Breakpoint Action Register fields. + */ +#define VIKING_ACTION_MIX 0x00001000 /* Enable multiple instructions */ + +/* + * GNU/Viking Cache Tags. + */ +#define VIKING_PTAG_VALID 0x01000000 /* Cache block is valid */ +#define VIKING_PTAG_DIRTY 0x00010000 /* Block has been modified */ +#define VIKING_PTAG_SHARED 0x00000100 /* Shared with some other cache */ + +#ifndef __ASSEMBLY__ + +static inline void viking_flush_icache(void) +{ + __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" + : /* no outputs */ + : "i" (ASI_M_IC_FLCLEAR) + : "memory"); +} + +static inline void viking_flush_dcache(void) +{ + __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" + : /* no outputs */ + : "i" (ASI_M_DC_FLCLEAR) + : "memory"); +} + +static inline void viking_unlock_icache(void) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (0x80000000), "i" (ASI_M_IC_FLCLEAR) + : "memory"); +} + +static inline void viking_unlock_dcache(void) +{ + __asm__ __volatile__("sta %%g0, [%0] %1\n\t" + : /* no outputs */ + : "r" (0x80000000), "i" (ASI_M_DC_FLCLEAR) + : "memory"); +} + +static inline void viking_set_bpreg(unsigned long regval) +{ + __asm__ __volatile__("sta %0, [%%g0] %1\n\t" + : /* no outputs */ + : "r" (regval), "i" (ASI_M_ACTION) + : "memory"); +} + +static inline unsigned long viking_get_bpreg(void) +{ + unsigned long regval; + + __asm__ __volatile__("lda [%%g0] %1, %0\n\t" + : "=r" (regval) + : "i" (ASI_M_ACTION)); + return regval; +} + +static inline void viking_get_dcache_ptag(int set, int block, + unsigned long *data) +{ + unsigned long ptag = ((set & 0x7f) << 5) | ((block & 0x3) << 26) | + 0x80000000; + unsigned long info, page; + + __asm__ __volatile__ ("ldda [%2] %3, %%g2\n\t" + "or %%g0, %%g2, %0\n\t" + "or %%g0, %%g3, %1\n\t" + : "=r" (info), "=r" (page) + : "r" (ptag), "i" (ASI_M_DATAC_TAG) + : "g2", "g3"); + data[0] = info; + data[1] = page; +} + +static inline void viking_mxcc_turn_off_parity(unsigned long *mregp, + unsigned long *mxcc_cregp) +{ + unsigned long mreg = *mregp; + unsigned long mxcc_creg = *mxcc_cregp; + + mreg &= ~(VIKING_PCENABLE); + mxcc_creg &= ~(MXCC_CTL_PARE); + + __asm__ __volatile__ ("set 1f, %%g2\n\t" + "andcc %%g2, 4, %%g0\n\t" + "bne 2f\n\t" + " nop\n" + "1:\n\t" + "sta %0, [%%g0] %3\n\t" + "sta %1, [%2] %4\n\t" + "b 1f\n\t" + " nop\n\t" + "nop\n" + "2:\n\t" + "sta %0, [%%g0] %3\n\t" + "sta %1, [%2] %4\n" + "1:\n\t" + : /* no output */ + : "r" (mreg), "r" (mxcc_creg), + "r" (MXCC_CREG), "i" (ASI_M_MMUREGS), + "i" (ASI_M_MXCC) + : "g2", "memory", "cc"); + *mregp = mreg; + *mxcc_cregp = mxcc_creg; +} + +static inline unsigned long viking_hwprobe(unsigned long vaddr) +{ + unsigned long val; + + vaddr &= PAGE_MASK; + /* Probe all MMU entries. */ + __asm__ __volatile__("lda [%1] %2, %0\n\t" + : "=r" (val) + : "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE)); + if (!val) + return 0; + + /* Probe region. */ + __asm__ __volatile__("lda [%1] %2, %0\n\t" + : "=r" (val) + : "r" (vaddr | 0x200), "i" (ASI_M_FLUSH_PROBE)); + if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) { + vaddr &= ~SRMMU_PGDIR_MASK; + vaddr >>= PAGE_SHIFT; + return val | (vaddr << 8); + } + + /* Probe segment. */ + __asm__ __volatile__("lda [%1] %2, %0\n\t" + : "=r" (val) + : "r" (vaddr | 0x100), "i" (ASI_M_FLUSH_PROBE)); + if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) { + vaddr &= ~SRMMU_REAL_PMD_MASK; + vaddr >>= PAGE_SHIFT; + return val | (vaddr << 8); + } + + /* Probe page. */ + __asm__ __volatile__("lda [%1] %2, %0\n\t" + : "=r" (val) + : "r" (vaddr), "i" (ASI_M_FLUSH_PROBE)); + return val; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* !(_SPARC_VIKING_H) */ diff --git a/arch/sparc/include/asm/vio.h b/arch/sparc/include/asm/vio.h new file mode 100644 index 00000000000..d4de32f0f8a --- /dev/null +++ b/arch/sparc/include/asm/vio.h @@ -0,0 +1,406 @@ +#ifndef _SPARC64_VIO_H +#define _SPARC64_VIO_H + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/mod_devicetable.h> +#include <linux/timer.h> +#include <linux/spinlock.h> +#include <linux/completion.h> +#include <linux/list.h> +#include <linux/log2.h> + +#include <asm/ldc.h> +#include <asm/mdesc.h> + +struct vio_msg_tag { + u8 type; +#define VIO_TYPE_CTRL 0x01 +#define VIO_TYPE_DATA 0x02 +#define VIO_TYPE_ERR 0x04 + + u8 stype; +#define VIO_SUBTYPE_INFO 0x01 +#define VIO_SUBTYPE_ACK 0x02 +#define VIO_SUBTYPE_NACK 0x04 + + u16 stype_env; +#define VIO_VER_INFO 0x0001 +#define VIO_ATTR_INFO 0x0002 +#define VIO_DRING_REG 0x0003 +#define VIO_DRING_UNREG 0x0004 +#define VIO_RDX 0x0005 +#define VIO_PKT_DATA 0x0040 +#define VIO_DESC_DATA 0x0041 +#define VIO_DRING_DATA 0x0042 +#define VNET_MCAST_INFO 0x0101 + + u32 sid; +}; + +struct vio_rdx { + struct vio_msg_tag tag; + u64 resv[6]; +}; + +struct vio_ver_info { + struct vio_msg_tag tag; + u16 major; + u16 minor; + u8 dev_class; +#define VDEV_NETWORK 0x01 +#define VDEV_NETWORK_SWITCH 0x02 +#define VDEV_DISK 0x03 +#define VDEV_DISK_SERVER 0x04 + + u8 resv1[3]; + u64 resv2[5]; +}; + +struct vio_dring_register { + struct vio_msg_tag tag; + u64 dring_ident; + u32 num_descr; + u32 descr_size; + u16 options; +#define VIO_TX_DRING 0x0001 +#define VIO_RX_DRING 0x0002 + u16 resv; + u32 num_cookies; + struct ldc_trans_cookie cookies[0]; +}; + +struct vio_dring_unregister { + struct vio_msg_tag tag; + u64 dring_ident; + u64 resv[5]; +}; + +/* Data transfer modes */ +#define VIO_PKT_MODE 0x01 /* Packet based transfer */ +#define VIO_DESC_MODE 0x02 /* In-band descriptors */ +#define VIO_DRING_MODE 0x03 /* Descriptor rings */ + +struct vio_dring_data { + struct vio_msg_tag tag; + u64 seq; + u64 dring_ident; + u32 start_idx; + u32 end_idx; + u8 state; +#define VIO_DRING_ACTIVE 0x01 +#define VIO_DRING_STOPPED 0x02 + + u8 __pad1; + u16 __pad2; + u32 __pad3; + u64 __par4[2]; +}; + +struct vio_dring_hdr { + u8 state; +#define VIO_DESC_FREE 0x01 +#define VIO_DESC_READY 0x02 +#define VIO_DESC_ACCEPTED 0x03 +#define VIO_DESC_DONE 0x04 + u8 ack; +#define VIO_ACK_ENABLE 0x01 +#define VIO_ACK_DISABLE 0x00 + + u16 __pad1; + u32 __pad2; +}; + +/* VIO disk specific structures and defines */ +struct vio_disk_attr_info { + struct vio_msg_tag tag; + u8 xfer_mode; + u8 vdisk_type; +#define VD_DISK_TYPE_SLICE 0x01 /* Slice in block device */ +#define VD_DISK_TYPE_DISK 0x02 /* Entire block device */ + u16 resv1; + u32 vdisk_block_size; + u64 operations; + u64 vdisk_size; + u64 max_xfer_size; + u64 resv2[2]; +}; + +struct vio_disk_desc { + struct vio_dring_hdr hdr; + u64 req_id; + u8 operation; +#define VD_OP_BREAD 0x01 /* Block read */ +#define VD_OP_BWRITE 0x02 /* Block write */ +#define VD_OP_FLUSH 0x03 /* Flush disk contents */ +#define VD_OP_GET_WCE 0x04 /* Get write-cache status */ +#define VD_OP_SET_WCE 0x05 /* Enable/disable write-cache */ +#define VD_OP_GET_VTOC 0x06 /* Get VTOC */ +#define VD_OP_SET_VTOC 0x07 /* Set VTOC */ +#define VD_OP_GET_DISKGEOM 0x08 /* Get disk geometry */ +#define VD_OP_SET_DISKGEOM 0x09 /* Set disk geometry */ +#define VD_OP_SCSICMD 0x0a /* SCSI control command */ +#define VD_OP_GET_DEVID 0x0b /* Get device ID */ +#define VD_OP_GET_EFI 0x0c /* Get EFI */ +#define VD_OP_SET_EFI 0x0d /* Set EFI */ + u8 slice; + u16 resv1; + u32 status; + u64 offset; + u64 size; + u32 ncookies; + u32 resv2; + struct ldc_trans_cookie cookies[0]; +}; + +#define VIO_DISK_VNAME_LEN 8 +#define VIO_DISK_ALABEL_LEN 128 +#define VIO_DISK_NUM_PART 8 + +struct vio_disk_vtoc { + u8 volume_name[VIO_DISK_VNAME_LEN]; + u16 sector_size; + u16 num_partitions; + u8 ascii_label[VIO_DISK_ALABEL_LEN]; + struct { + u16 id; + u16 perm_flags; + u32 resv; + u64 start_block; + u64 num_blocks; + } partitions[VIO_DISK_NUM_PART]; +}; + +struct vio_disk_geom { + u16 num_cyl; /* Num data cylinders */ + u16 alt_cyl; /* Num alternate cylinders */ + u16 beg_cyl; /* Cyl off of fixed head area */ + u16 num_hd; /* Num heads */ + u16 num_sec; /* Num sectors */ + u16 ifact; /* Interleave factor */ + u16 apc; /* Alts per cylinder (SCSI) */ + u16 rpm; /* Revolutions per minute */ + u16 phy_cyl; /* Num physical cylinders */ + u16 wr_skip; /* Num sects to skip, writes */ + u16 rd_skip; /* Num sects to skip, writes */ +}; + +struct vio_disk_devid { + u16 resv; + u16 type; + u32 len; + char id[0]; +}; + +struct vio_disk_efi { + u64 lba; + u64 len; + char data[0]; +}; + +/* VIO net specific structures and defines */ +struct vio_net_attr_info { + struct vio_msg_tag tag; + u8 xfer_mode; + u8 addr_type; +#define VNET_ADDR_ETHERMAC 0x01 + u16 ack_freq; + u32 resv1; + u64 addr; + u64 mtu; + u64 resv2[3]; +}; + +#define VNET_NUM_MCAST 7 + +struct vio_net_mcast_info { + struct vio_msg_tag tag; + u8 set; + u8 count; + u8 mcast_addr[VNET_NUM_MCAST * 6]; + u32 resv; +}; + +struct vio_net_desc { + struct vio_dring_hdr hdr; + u32 size; + u32 ncookies; + struct ldc_trans_cookie cookies[0]; +}; + +#define VIO_MAX_RING_COOKIES 24 + +struct vio_dring_state { + u64 ident; + void *base; + u64 snd_nxt; + u64 rcv_nxt; + u32 entry_size; + u32 num_entries; + u32 prod; + u32 cons; + u32 pending; + int ncookies; + struct ldc_trans_cookie cookies[VIO_MAX_RING_COOKIES]; +}; + +static inline void *vio_dring_cur(struct vio_dring_state *dr) +{ + return dr->base + (dr->entry_size * dr->prod); +} + +static inline void *vio_dring_entry(struct vio_dring_state *dr, + unsigned int index) +{ + return dr->base + (dr->entry_size * index); +} + +static inline u32 vio_dring_avail(struct vio_dring_state *dr, + unsigned int ring_size) +{ + BUILD_BUG_ON(!is_power_of_2(ring_size)); + + return (dr->pending - + ((dr->prod - dr->cons) & (ring_size - 1))); +} + +#define VIO_MAX_TYPE_LEN 32 +#define VIO_MAX_COMPAT_LEN 64 + +struct vio_dev { + u64 mp; + struct device_node *dp; + + char type[VIO_MAX_TYPE_LEN]; + char compat[VIO_MAX_COMPAT_LEN]; + int compat_len; + + u64 dev_no; + + unsigned long channel_id; + + unsigned int tx_irq; + unsigned int rx_irq; + + struct device dev; +}; + +struct vio_driver { + struct list_head node; + const struct vio_device_id *id_table; + int (*probe)(struct vio_dev *dev, const struct vio_device_id *id); + int (*remove)(struct vio_dev *dev); + void (*shutdown)(struct vio_dev *dev); + unsigned long driver_data; + struct device_driver driver; +}; + +struct vio_version { + u16 major; + u16 minor; +}; + +struct vio_driver_state; +struct vio_driver_ops { + int (*send_attr)(struct vio_driver_state *vio); + int (*handle_attr)(struct vio_driver_state *vio, void *pkt); + void (*handshake_complete)(struct vio_driver_state *vio); +}; + +struct vio_completion { + struct completion com; + int err; + int waiting_for; +}; + +struct vio_driver_state { + /* Protects VIO handshake and, optionally, driver private state. */ + spinlock_t lock; + + struct ldc_channel *lp; + + u32 _peer_sid; + u32 _local_sid; + struct vio_dring_state drings[2]; +#define VIO_DRIVER_TX_RING 0 +#define VIO_DRIVER_RX_RING 1 + + u8 hs_state; +#define VIO_HS_INVALID 0x00 +#define VIO_HS_GOTVERS 0x01 +#define VIO_HS_GOT_ATTR 0x04 +#define VIO_HS_SENT_DREG 0x08 +#define VIO_HS_SENT_RDX 0x10 +#define VIO_HS_GOT_RDX_ACK 0x20 +#define VIO_HS_GOT_RDX 0x40 +#define VIO_HS_SENT_RDX_ACK 0x80 +#define VIO_HS_COMPLETE (VIO_HS_GOT_RDX_ACK | VIO_HS_SENT_RDX_ACK) + + u8 dev_class; + + u8 dr_state; +#define VIO_DR_STATE_TXREG 0x01 +#define VIO_DR_STATE_RXREG 0x02 +#define VIO_DR_STATE_TXREQ 0x10 +#define VIO_DR_STATE_RXREQ 0x20 + + u8 debug; +#define VIO_DEBUG_HS 0x01 +#define VIO_DEBUG_DATA 0x02 + + void *desc_buf; + unsigned int desc_buf_len; + + struct vio_completion *cmp; + + struct vio_dev *vdev; + + struct timer_list timer; + + struct vio_version ver; + + struct vio_version *ver_table; + int ver_table_entries; + + char *name; + + struct vio_driver_ops *ops; +}; + +#define viodbg(TYPE, f, a...) \ +do { if (vio->debug & VIO_DEBUG_##TYPE) \ + printk(KERN_INFO "vio: ID[%lu] " f, \ + vio->vdev->channel_id, ## a); \ +} while (0) + +extern int vio_register_driver(struct vio_driver *drv); +extern void vio_unregister_driver(struct vio_driver *drv); + +static inline struct vio_driver *to_vio_driver(struct device_driver *drv) +{ + return container_of(drv, struct vio_driver, driver); +} + +static inline struct vio_dev *to_vio_dev(struct device *dev) +{ + return container_of(dev, struct vio_dev, dev); +} + +extern int vio_ldc_send(struct vio_driver_state *vio, void *data, int len); +extern void vio_link_state_change(struct vio_driver_state *vio, int event); +extern void vio_conn_reset(struct vio_driver_state *vio); +extern int vio_control_pkt_engine(struct vio_driver_state *vio, void *pkt); +extern int vio_validate_sid(struct vio_driver_state *vio, + struct vio_msg_tag *tp); +extern u32 vio_send_sid(struct vio_driver_state *vio); +extern int vio_ldc_alloc(struct vio_driver_state *vio, + struct ldc_channel_config *base_cfg, void *event_arg); +extern void vio_ldc_free(struct vio_driver_state *vio); +extern int vio_driver_init(struct vio_driver_state *vio, struct vio_dev *vdev, + u8 dev_class, struct vio_version *ver_table, + int ver_table_size, struct vio_driver_ops *ops, + char *name); + +extern void vio_port_up(struct vio_driver_state *vio); + +#endif /* _SPARC64_VIO_H */ diff --git a/arch/sparc/include/asm/visasm.h b/arch/sparc/include/asm/visasm.h new file mode 100644 index 00000000000..de797b9bf55 --- /dev/null +++ b/arch/sparc/include/asm/visasm.h @@ -0,0 +1,62 @@ +#ifndef _SPARC64_VISASM_H +#define _SPARC64_VISASM_H + +/* visasm.h: FPU saving macros for VIS routines + * + * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz) + */ + +#include <asm/pstate.h> +#include <asm/ptrace.h> + +/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc */ + +#define VISEntry \ + rd %fprs, %o5; \ + andcc %o5, (FPRS_FEF|FPRS_DU), %g0; \ + be,pt %icc, 297f; \ + sethi %hi(297f), %g7; \ + sethi %hi(VISenter), %g1; \ + jmpl %g1 + %lo(VISenter), %g0; \ + or %g7, %lo(297f), %g7; \ +297: wr %g0, FPRS_FEF, %fprs; \ + +#define VISExit \ + wr %g0, 0, %fprs; + +/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc. + * Must preserve %o5 between VISEntryHalf and VISExitHalf */ + +#define VISEntryHalf \ + rd %fprs, %o5; \ + andcc %o5, FPRS_FEF, %g0; \ + be,pt %icc, 297f; \ + sethi %hi(298f), %g7; \ + sethi %hi(VISenterhalf), %g1; \ + jmpl %g1 + %lo(VISenterhalf), %g0; \ + or %g7, %lo(298f), %g7; \ + clr %o5; \ +297: wr %o5, FPRS_FEF, %fprs; \ +298: + +#define VISExitHalf \ + wr %o5, 0, %fprs; + +#ifndef __ASSEMBLY__ +static inline void save_and_clear_fpu(void) { + __asm__ __volatile__ ( +" rd %%fprs, %%o5\n" +" andcc %%o5, %0, %%g0\n" +" be,pt %%icc, 299f\n" +" sethi %%hi(298f), %%g7\n" +" sethi %%hi(VISenter), %%g1\n" +" jmpl %%g1 + %%lo(VISenter), %%g0\n" +" or %%g7, %%lo(298f), %%g7\n" +" 298: wr %%g0, 0, %%fprs\n" +" 299:\n" +" " : : "i" (FPRS_FEF|FPRS_DU) : + "o5", "g1", "g2", "g3", "g7", "cc"); +} +#endif + +#endif /* _SPARC64_ASI_H */ diff --git a/arch/sparc/include/asm/watchdog.h b/arch/sparc/include/asm/watchdog.h new file mode 100644 index 00000000000..5baf2d3919c --- /dev/null +++ b/arch/sparc/include/asm/watchdog.h @@ -0,0 +1,31 @@ +/* + * + * watchdog - Driver interface for the hardware watchdog timers + * present on Sun Microsystems boardsets + * + * Copyright (c) 2000 Eric Brower <ebrower@usa.net> + * + */ + +#ifndef _SPARC64_WATCHDOG_H +#define _SPARC64_WATCHDOG_H + +#include <linux/watchdog.h> + +/* Solaris compatibility ioctls-- + * Ref. <linux/watchdog.h> for standard linux watchdog ioctls + */ +#define WIOCSTART _IO (WATCHDOG_IOCTL_BASE, 10) /* Start Timer */ +#define WIOCSTOP _IO (WATCHDOG_IOCTL_BASE, 11) /* Stop Timer */ +#define WIOCGSTAT _IOR(WATCHDOG_IOCTL_BASE, 12, int)/* Get Timer Status */ + +/* Status flags from WIOCGSTAT ioctl + */ +#define WD_FREERUN 0x01 /* timer is running, interrupts disabled */ +#define WD_EXPIRED 0x02 /* timer has expired */ +#define WD_RUNNING 0x04 /* timer is running, interrupts enabled */ +#define WD_STOPPED 0x08 /* timer has not been started */ +#define WD_SERVICED 0x10 /* timer interrupt was serviced */ + +#endif /* ifndef _SPARC64_WATCHDOG_H */ + diff --git a/arch/sparc/include/asm/winmacro.h b/arch/sparc/include/asm/winmacro.h new file mode 100644 index 00000000000..5b0a06dc3bc --- /dev/null +++ b/arch/sparc/include/asm/winmacro.h @@ -0,0 +1,135 @@ +/* + * winmacro.h: Window loading-unloading macros. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +#ifndef _SPARC_WINMACRO_H +#define _SPARC_WINMACRO_H + +#include <asm/ptrace.h> + +/* Store the register window onto the 8-byte aligned area starting + * at %reg. It might be %sp, it might not, we don't care. + */ +#define STORE_WINDOW(reg) \ + std %l0, [%reg + RW_L0]; \ + std %l2, [%reg + RW_L2]; \ + std %l4, [%reg + RW_L4]; \ + std %l6, [%reg + RW_L6]; \ + std %i0, [%reg + RW_I0]; \ + std %i2, [%reg + RW_I2]; \ + std %i4, [%reg + RW_I4]; \ + std %i6, [%reg + RW_I6]; + +/* Load a register window from the area beginning at %reg. */ +#define LOAD_WINDOW(reg) \ + ldd [%reg + RW_L0], %l0; \ + ldd [%reg + RW_L2], %l2; \ + ldd [%reg + RW_L4], %l4; \ + ldd [%reg + RW_L6], %l6; \ + ldd [%reg + RW_I0], %i0; \ + ldd [%reg + RW_I2], %i2; \ + ldd [%reg + RW_I4], %i4; \ + ldd [%reg + RW_I6], %i6; + +/* Loading and storing struct pt_reg trap frames. */ +#define LOAD_PT_INS(base_reg) \ + ldd [%base_reg + STACKFRAME_SZ + PT_I0], %i0; \ + ldd [%base_reg + STACKFRAME_SZ + PT_I2], %i2; \ + ldd [%base_reg + STACKFRAME_SZ + PT_I4], %i4; \ + ldd [%base_reg + STACKFRAME_SZ + PT_I6], %i6; + +#define LOAD_PT_GLOBALS(base_reg) \ + ld [%base_reg + STACKFRAME_SZ + PT_G1], %g1; \ + ldd [%base_reg + STACKFRAME_SZ + PT_G2], %g2; \ + ldd [%base_reg + STACKFRAME_SZ + PT_G4], %g4; \ + ldd [%base_reg + STACKFRAME_SZ + PT_G6], %g6; + +#define LOAD_PT_YREG(base_reg, scratch) \ + ld [%base_reg + STACKFRAME_SZ + PT_Y], %scratch; \ + wr %scratch, 0x0, %y; + +#define LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \ + ld [%base_reg + STACKFRAME_SZ + PT_PSR], %pt_psr; \ + ld [%base_reg + STACKFRAME_SZ + PT_PC], %pt_pc; \ + ld [%base_reg + STACKFRAME_SZ + PT_NPC], %pt_npc; + +#define LOAD_PT_ALL(base_reg, pt_psr, pt_pc, pt_npc, scratch) \ + LOAD_PT_YREG(base_reg, scratch) \ + LOAD_PT_INS(base_reg) \ + LOAD_PT_GLOBALS(base_reg) \ + LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) + +#define STORE_PT_INS(base_reg) \ + std %i0, [%base_reg + STACKFRAME_SZ + PT_I0]; \ + std %i2, [%base_reg + STACKFRAME_SZ + PT_I2]; \ + std %i4, [%base_reg + STACKFRAME_SZ + PT_I4]; \ + std %i6, [%base_reg + STACKFRAME_SZ + PT_I6]; + +#define STORE_PT_GLOBALS(base_reg) \ + st %g1, [%base_reg + STACKFRAME_SZ + PT_G1]; \ + std %g2, [%base_reg + STACKFRAME_SZ + PT_G2]; \ + std %g4, [%base_reg + STACKFRAME_SZ + PT_G4]; \ + std %g6, [%base_reg + STACKFRAME_SZ + PT_G6]; + +#define STORE_PT_YREG(base_reg, scratch) \ + rd %y, %scratch; \ + st %scratch, [%base_reg + STACKFRAME_SZ + PT_Y]; + +#define STORE_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \ + st %pt_psr, [%base_reg + STACKFRAME_SZ + PT_PSR]; \ + st %pt_pc, [%base_reg + STACKFRAME_SZ + PT_PC]; \ + st %pt_npc, [%base_reg + STACKFRAME_SZ + PT_NPC]; + +#define STORE_PT_ALL(base_reg, reg_psr, reg_pc, reg_npc, g_scratch) \ + STORE_PT_PRIV(base_reg, reg_psr, reg_pc, reg_npc) \ + STORE_PT_GLOBALS(base_reg) \ + STORE_PT_YREG(base_reg, g_scratch) \ + STORE_PT_INS(base_reg) + +#define SAVE_BOLIXED_USER_STACK(cur_reg, scratch) \ + ld [%cur_reg + TI_W_SAVED], %scratch; \ + sll %scratch, 2, %scratch; \ + add %scratch, %cur_reg, %scratch; \ + st %sp, [%scratch + TI_RWIN_SPTRS]; \ + sub %scratch, %cur_reg, %scratch; \ + sll %scratch, 4, %scratch; \ + add %scratch, %cur_reg, %scratch; \ + STORE_WINDOW(scratch + TI_REG_WINDOW); \ + sub %scratch, %cur_reg, %scratch; \ + srl %scratch, 6, %scratch; \ + add %scratch, 1, %scratch; \ + st %scratch, [%cur_reg + TI_W_SAVED]; + +#ifdef CONFIG_SMP +#define LOAD_CURRENT4M(dest_reg, idreg) \ + rd %tbr, %idreg; \ + sethi %hi(current_set), %dest_reg; \ + srl %idreg, 10, %idreg; \ + or %dest_reg, %lo(current_set), %dest_reg; \ + and %idreg, 0xc, %idreg; \ + ld [%idreg + %dest_reg], %dest_reg; + +#define LOAD_CURRENT4D(dest_reg, idreg) \ + lda [%g0] ASI_M_VIKING_TMP1, %idreg; \ + sethi %hi(C_LABEL(current_set)), %dest_reg; \ + sll %idreg, 2, %idreg; \ + or %dest_reg, %lo(C_LABEL(current_set)), %dest_reg; \ + ld [%idreg + %dest_reg], %dest_reg; + +/* Blackbox - take care with this... - check smp4m and smp4d before changing this. */ +#define LOAD_CURRENT(dest_reg, idreg) \ + sethi %hi(___b_load_current), %idreg; \ + sethi %hi(current_set), %dest_reg; \ + sethi %hi(boot_cpu_id4), %idreg; \ + or %dest_reg, %lo(current_set), %dest_reg; \ + ldub [%idreg + %lo(boot_cpu_id4)], %idreg; \ + ld [%idreg + %dest_reg], %dest_reg; +#else +#define LOAD_CURRENT(dest_reg, idreg) \ + sethi %hi(current_set), %idreg; \ + ld [%idreg + %lo(current_set)], %dest_reg; +#endif + +#endif /* !(_SPARC_WINMACRO_H) */ diff --git a/arch/sparc/include/asm/xor.h b/arch/sparc/include/asm/xor.h new file mode 100644 index 00000000000..8ed591c7db2 --- /dev/null +++ b/arch/sparc/include/asm/xor.h @@ -0,0 +1,8 @@ +#ifndef ___ASM_SPARC_XOR_H +#define ___ASM_SPARC_XOR_H +#if defined(__sparc__) && defined(__arch64__) +#include <asm/xor_64.h> +#else +#include <asm/xor_32.h> +#endif +#endif diff --git a/arch/sparc/include/asm/xor_32.h b/arch/sparc/include/asm/xor_32.h new file mode 100644 index 00000000000..44bfa0787f3 --- /dev/null +++ b/arch/sparc/include/asm/xor_32.h @@ -0,0 +1,269 @@ +/* + * include/asm/xor.h + * + * Optimized RAID-5 checksumming functions for 32-bit Sparc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * You should have received a copy of the GNU General Public License + * (for example /usr/src/linux/COPYING); if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * High speed xor_block operation for RAID4/5 utilizing the + * ldd/std SPARC instructions. + * + * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz) + */ + +static void +sparc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) +{ + int lines = bytes / (sizeof (long)) / 8; + + do { + __asm__ __volatile__( + "ldd [%0 + 0x00], %%g2\n\t" + "ldd [%0 + 0x08], %%g4\n\t" + "ldd [%0 + 0x10], %%o0\n\t" + "ldd [%0 + 0x18], %%o2\n\t" + "ldd [%1 + 0x00], %%o4\n\t" + "ldd [%1 + 0x08], %%l0\n\t" + "ldd [%1 + 0x10], %%l2\n\t" + "ldd [%1 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "std %%g2, [%0 + 0x00]\n\t" + "std %%g4, [%0 + 0x08]\n\t" + "std %%o0, [%0 + 0x10]\n\t" + "std %%o2, [%0 + 0x18]\n" + : + : "r" (p1), "r" (p2) + : "g2", "g3", "g4", "g5", + "o0", "o1", "o2", "o3", "o4", "o5", + "l0", "l1", "l2", "l3", "l4", "l5"); + p1 += 8; + p2 += 8; + } while (--lines > 0); +} + +static void +sparc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3) +{ + int lines = bytes / (sizeof (long)) / 8; + + do { + __asm__ __volatile__( + "ldd [%0 + 0x00], %%g2\n\t" + "ldd [%0 + 0x08], %%g4\n\t" + "ldd [%0 + 0x10], %%o0\n\t" + "ldd [%0 + 0x18], %%o2\n\t" + "ldd [%1 + 0x00], %%o4\n\t" + "ldd [%1 + 0x08], %%l0\n\t" + "ldd [%1 + 0x10], %%l2\n\t" + "ldd [%1 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "ldd [%2 + 0x00], %%o4\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "ldd [%2 + 0x08], %%l0\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "ldd [%2 + 0x10], %%l2\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "ldd [%2 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "std %%g2, [%0 + 0x00]\n\t" + "std %%g4, [%0 + 0x08]\n\t" + "std %%o0, [%0 + 0x10]\n\t" + "std %%o2, [%0 + 0x18]\n" + : + : "r" (p1), "r" (p2), "r" (p3) + : "g2", "g3", "g4", "g5", + "o0", "o1", "o2", "o3", "o4", "o5", + "l0", "l1", "l2", "l3", "l4", "l5"); + p1 += 8; + p2 += 8; + p3 += 8; + } while (--lines > 0); +} + +static void +sparc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4) +{ + int lines = bytes / (sizeof (long)) / 8; + + do { + __asm__ __volatile__( + "ldd [%0 + 0x00], %%g2\n\t" + "ldd [%0 + 0x08], %%g4\n\t" + "ldd [%0 + 0x10], %%o0\n\t" + "ldd [%0 + 0x18], %%o2\n\t" + "ldd [%1 + 0x00], %%o4\n\t" + "ldd [%1 + 0x08], %%l0\n\t" + "ldd [%1 + 0x10], %%l2\n\t" + "ldd [%1 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "ldd [%2 + 0x00], %%o4\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "ldd [%2 + 0x08], %%l0\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "ldd [%2 + 0x10], %%l2\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "ldd [%2 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "ldd [%3 + 0x00], %%o4\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "ldd [%3 + 0x08], %%l0\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "ldd [%3 + 0x10], %%l2\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "ldd [%3 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "std %%g2, [%0 + 0x00]\n\t" + "std %%g4, [%0 + 0x08]\n\t" + "std %%o0, [%0 + 0x10]\n\t" + "std %%o2, [%0 + 0x18]\n" + : + : "r" (p1), "r" (p2), "r" (p3), "r" (p4) + : "g2", "g3", "g4", "g5", + "o0", "o1", "o2", "o3", "o4", "o5", + "l0", "l1", "l2", "l3", "l4", "l5"); + p1 += 8; + p2 += 8; + p3 += 8; + p4 += 8; + } while (--lines > 0); +} + +static void +sparc_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4, unsigned long *p5) +{ + int lines = bytes / (sizeof (long)) / 8; + + do { + __asm__ __volatile__( + "ldd [%0 + 0x00], %%g2\n\t" + "ldd [%0 + 0x08], %%g4\n\t" + "ldd [%0 + 0x10], %%o0\n\t" + "ldd [%0 + 0x18], %%o2\n\t" + "ldd [%1 + 0x00], %%o4\n\t" + "ldd [%1 + 0x08], %%l0\n\t" + "ldd [%1 + 0x10], %%l2\n\t" + "ldd [%1 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "ldd [%2 + 0x00], %%o4\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "ldd [%2 + 0x08], %%l0\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "ldd [%2 + 0x10], %%l2\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "ldd [%2 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "ldd [%3 + 0x00], %%o4\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "ldd [%3 + 0x08], %%l0\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "ldd [%3 + 0x10], %%l2\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "ldd [%3 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "ldd [%4 + 0x00], %%o4\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "ldd [%4 + 0x08], %%l0\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "ldd [%4 + 0x10], %%l2\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "ldd [%4 + 0x18], %%l4\n\t" + "xor %%g2, %%o4, %%g2\n\t" + "xor %%g3, %%o5, %%g3\n\t" + "xor %%g4, %%l0, %%g4\n\t" + "xor %%g5, %%l1, %%g5\n\t" + "xor %%o0, %%l2, %%o0\n\t" + "xor %%o1, %%l3, %%o1\n\t" + "xor %%o2, %%l4, %%o2\n\t" + "xor %%o3, %%l5, %%o3\n\t" + "std %%g2, [%0 + 0x00]\n\t" + "std %%g4, [%0 + 0x08]\n\t" + "std %%o0, [%0 + 0x10]\n\t" + "std %%o2, [%0 + 0x18]\n" + : + : "r" (p1), "r" (p2), "r" (p3), "r" (p4), "r" (p5) + : "g2", "g3", "g4", "g5", + "o0", "o1", "o2", "o3", "o4", "o5", + "l0", "l1", "l2", "l3", "l4", "l5"); + p1 += 8; + p2 += 8; + p3 += 8; + p4 += 8; + p5 += 8; + } while (--lines > 0); +} + +static struct xor_block_template xor_block_SPARC = { + .name = "SPARC", + .do_2 = sparc_2, + .do_3 = sparc_3, + .do_4 = sparc_4, + .do_5 = sparc_5, +}; + +/* For grins, also test the generic routines. */ +#include <asm-generic/xor.h> + +#undef XOR_TRY_TEMPLATES +#define XOR_TRY_TEMPLATES \ + do { \ + xor_speed(&xor_block_8regs); \ + xor_speed(&xor_block_32regs); \ + xor_speed(&xor_block_SPARC); \ + } while (0) diff --git a/arch/sparc/include/asm/xor_64.h b/arch/sparc/include/asm/xor_64.h new file mode 100644 index 00000000000..bee4bf4be3a --- /dev/null +++ b/arch/sparc/include/asm/xor_64.h @@ -0,0 +1,70 @@ +/* + * include/asm/xor.h + * + * High speed xor_block operation for RAID4/5 utilizing the + * UltraSparc Visual Instruction Set and Niagara block-init + * twin-load instructions. + * + * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz) + * Copyright (C) 2006 David S. Miller <davem@davemloft.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * You should have received a copy of the GNU General Public License + * (for example /usr/src/linux/COPYING); if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <asm/spitfire.h> + +extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *); +extern void xor_vis_3(unsigned long, unsigned long *, unsigned long *, + unsigned long *); +extern void xor_vis_4(unsigned long, unsigned long *, unsigned long *, + unsigned long *, unsigned long *); +extern void xor_vis_5(unsigned long, unsigned long *, unsigned long *, + unsigned long *, unsigned long *, unsigned long *); + +/* XXX Ugh, write cheetah versions... -DaveM */ + +static struct xor_block_template xor_block_VIS = { + .name = "VIS", + .do_2 = xor_vis_2, + .do_3 = xor_vis_3, + .do_4 = xor_vis_4, + .do_5 = xor_vis_5, +}; + +extern void xor_niagara_2(unsigned long, unsigned long *, unsigned long *); +extern void xor_niagara_3(unsigned long, unsigned long *, unsigned long *, + unsigned long *); +extern void xor_niagara_4(unsigned long, unsigned long *, unsigned long *, + unsigned long *, unsigned long *); +extern void xor_niagara_5(unsigned long, unsigned long *, unsigned long *, + unsigned long *, unsigned long *, unsigned long *); + +static struct xor_block_template xor_block_niagara = { + .name = "Niagara", + .do_2 = xor_niagara_2, + .do_3 = xor_niagara_3, + .do_4 = xor_niagara_4, + .do_5 = xor_niagara_5, +}; + +#undef XOR_TRY_TEMPLATES +#define XOR_TRY_TEMPLATES \ + do { \ + xor_speed(&xor_block_VIS); \ + xor_speed(&xor_block_niagara); \ + } while (0) + +/* For VIS for everything except Niagara. */ +#define XOR_SELECT_TEMPLATE(FASTEST) \ + ((tlb_type == hypervisor && \ + (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 || \ + sun4v_chip_type == SUN4V_CHIP_NIAGARA2)) ? \ + &xor_block_niagara : \ + &xor_block_VIS) diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S index 2f96256dc51..e8cdf715a54 100644 --- a/arch/sparc/kernel/entry.S +++ b/arch/sparc/kernel/entry.S @@ -1196,8 +1196,9 @@ sys_rt_sigreturn: be 1f nop + add %sp, STACKFRAME_SZ, %o0 call syscall_trace - nop + mov 1, %o1 1: /* We are returning to a signal handler. */ @@ -1287,8 +1288,12 @@ linux_fast_syscall: mov %i3, %o3 linux_syscall_trace: + add %sp, STACKFRAME_SZ, %o0 call syscall_trace - nop + mov 0, %o1 + cmp %o0, 0 + bne 3f + mov -ENOSYS, %o0 mov %i0, %o0 mov %i1, %o1 mov %i2, %o2 @@ -1337,6 +1342,7 @@ syscall_is_too_hard: call %l7 mov %i5, %o5 +3: st %o0, [%sp + STACKFRAME_SZ + PT_I0] ret_sys_call: @@ -1374,6 +1380,8 @@ ret_sys_call: st %l2, [%sp + STACKFRAME_SZ + PT_NPC] linux_syscall_trace2: + add %sp, STACKFRAME_SZ, %o0 + mov 1, %o1 call syscall_trace add %l1, 0x4, %l2 /* npc = npc+4 */ st %l1, [%sp + STACKFRAME_SZ + PT_PC] diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c index 81f3b929743..20699c70141 100644 --- a/arch/sparc/kernel/ptrace.c +++ b/arch/sparc/kernel/ptrace.c @@ -21,6 +21,7 @@ #include <linux/signal.h> #include <linux/regset.h> #include <linux/elf.h> +#include <linux/tracehook.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -450,21 +451,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return ret; } -asmlinkage void syscall_trace(void) +asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p) { - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return; - if (!(current->ptrace & PT_PTRACED)) - return; - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) - ? 0x80 : 0)); - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig (current->exit_code, current, 1); - current->exit_code = 0; + int ret = 0; + + if (test_thread_flag(TIF_SYSCALL_TRACE)) { + if (syscall_exit_p) + tracehook_report_syscall_exit(regs, 0); + else + ret = tracehook_report_syscall_entry(regs); } + + return ret; } diff --git a/arch/sparc/kernel/rtrap.S b/arch/sparc/kernel/rtrap.S index 891f460b7b9..4da2e1f6629 100644 --- a/arch/sparc/kernel/rtrap.S +++ b/arch/sparc/kernel/rtrap.S @@ -69,12 +69,13 @@ ret_trap_lockless_ipi: ld [%curptr + TI_FLAGS], %g2 signal_p: - andcc %g2, (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK), %g0 + andcc %g2, _TIF_DO_NOTIFY_RESUME_MASK, %g0 bz,a ret_trap_continue ld [%sp + STACKFRAME_SZ + PT_PSR], %t_psr + mov %g2, %o2 mov %l5, %o1 - call do_signal + call do_notify_resume add %sp, STACKFRAME_SZ, %o0 ! pt_regs ptr /* Fall through. */ diff --git a/arch/sparc/kernel/signal.c b/arch/sparc/kernel/signal.c index 3fd1df9f9ba..c94f91c8b6e 100644 --- a/arch/sparc/kernel/signal.c +++ b/arch/sparc/kernel/signal.c @@ -18,6 +18,7 @@ #include <linux/smp.h> #include <linux/binfmts.h> /* do_coredum */ #include <linux/bitops.h> +#include <linux/tracehook.h> #include <asm/uaccess.h> #include <asm/ptrace.h> @@ -513,7 +514,7 @@ static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs, * want to handle. Thus you cannot kill init even with a SIGKILL even by * mistake. */ -asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0) +static void do_signal(struct pt_regs *regs, unsigned long orig_i0) { struct k_sigaction ka; int restart_syscall; @@ -552,6 +553,8 @@ asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0) */ if (test_thread_flag(TIF_RESTORE_SIGMASK)) clear_thread_flag(TIF_RESTORE_SIGMASK); + + tracehook_signal_handler(signr, &info, &ka, regs, 0); return; } if (restart_syscall && @@ -579,6 +582,17 @@ asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0) } } +void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, + unsigned long thread_info_flags) +{ + if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) + do_signal(regs, orig_i0); + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + } +} + asmlinkage int do_sys_sigstack(struct sigstack __user *ssptr, struct sigstack __user *ossptr, unsigned long sp) diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index 7c88263256a..923a98959fa 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -17,6 +17,7 @@ config SPARC64 select HAVE_LMB select HAVE_ARCH_KGDB select USE_GENERIC_SMP_HELPERS if SMP + select HAVE_ARCH_TRACEHOOK config GENERIC_TIME bool diff --git a/arch/sparc64/kernel/compat_audit.c b/arch/sparc64/kernel/compat_audit.c index c1979482aa9..c831b0a4e66 100644 --- a/arch/sparc64/kernel/compat_audit.c +++ b/arch/sparc64/kernel/compat_audit.c @@ -1,4 +1,4 @@ -#include <asm-sparc/unistd.h> +#include <asm/unistd_32.h> unsigned sparc32_dir_class[] = { #include <asm-generic/audit_dir_write.h> diff --git a/arch/sparc64/kernel/entry.h b/arch/sparc64/kernel/entry.h index 32fbab62085..fc294a29289 100644 --- a/arch/sparc64/kernel/entry.h +++ b/arch/sparc64/kernel/entry.h @@ -22,8 +22,7 @@ extern void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, unsigned long thread_info_flags); -extern asmlinkage void syscall_trace(struct pt_regs *regs, - int syscall_exit_p); +extern asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p); extern void bad_trap_tl1(struct pt_regs *regs, long lvl); diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c index f6c9fc92921..bd578cc4856 100644 --- a/arch/sparc64/kernel/ptrace.c +++ b/arch/sparc64/kernel/ptrace.c @@ -23,6 +23,7 @@ #include <linux/audit.h> #include <linux/signal.h> #include <linux/regset.h> +#include <linux/tracehook.h> #include <linux/compat.h> #include <linux/elf.h> @@ -1049,8 +1050,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return ret; } -asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p) +asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p) { + int ret = 0; + /* do the secure computing check first */ secure_computing(regs->u_regs[UREG_G1]); @@ -1064,27 +1067,14 @@ asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p) audit_syscall_exit(result, regs->u_regs[UREG_I0]); } - if (!(current->ptrace & PT_PTRACED)) - goto out; - - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - goto out; - - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) - ? 0x80 : 0)); - - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; + if (test_thread_flag(TIF_SYSCALL_TRACE)) { + if (syscall_exit_p) + tracehook_report_syscall_exit(regs, 0); + else + ret = tracehook_report_syscall_entry(regs); } -out: - if (unlikely(current->audit_context) && !syscall_exit_p) + if (unlikely(current->audit_context) && !syscall_exit_p && !ret) audit_syscall_entry((test_thread_flag(TIF_32BIT) ? AUDIT_ARCH_SPARC : AUDIT_ARCH_SPARC64), @@ -1093,4 +1083,6 @@ out: regs->u_regs[UREG_I1], regs->u_regs[UREG_I2], regs->u_regs[UREG_I3]); + + return ret; } diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index c6fc695fe1f..97a993c1f7f 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -46,7 +46,7 @@ __handle_user_windows: wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate ldx [%g6 + TI_FLAGS], %l0 -1: andcc %l0, _TIF_SIGPENDING, %g0 +1: andcc %l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0 be,pt %xcc, __handle_user_windows_continue nop mov %l5, %o1 @@ -86,7 +86,7 @@ __handle_perfctrs: wrpr %g0, RTRAP_PSTATE, %pstate wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate ldx [%g6 + TI_FLAGS], %l0 -1: andcc %l0, _TIF_SIGPENDING, %g0 +1: andcc %l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0 be,pt %xcc, __handle_perfctrs_continue sethi %hi(TSTATE_PEF), %o0 @@ -195,7 +195,7 @@ __handle_preemption_continue: andcc %l1, %o0, %g0 andcc %l0, _TIF_NEED_RESCHED, %g0 bne,pn %xcc, __handle_preemption - andcc %l0, _TIF_SIGPENDING, %g0 + andcc %l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0 bne,pn %xcc, __handle_signal __handle_signal_continue: ldub [%g6 + TI_WSAVED], %o2 diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c index 9667e96fd51..d1b84456a9e 100644 --- a/arch/sparc64/kernel/signal.c +++ b/arch/sparc64/kernel/signal.c @@ -17,11 +17,13 @@ #include <linux/errno.h> #include <linux/wait.h> #include <linux/ptrace.h> +#include <linux/tracehook.h> #include <linux/unistd.h> #include <linux/mm.h> #include <linux/tty.h> #include <linux/binfmts.h> #include <linux/bitops.h> +#include <linux/tracehook.h> #include <asm/uaccess.h> #include <asm/ptrace.h> @@ -574,6 +576,8 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0) * clear the TS_RESTORE_SIGMASK flag. */ current_thread_info()->status &= ~TS_RESTORE_SIGMASK; + + tracehook_signal_handler(signr, &info, &ka, regs, 0); return; } if (restart_syscall && @@ -605,4 +609,8 @@ void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, unsigned long { if (thread_info_flags & _TIF_SIGPENDING) do_signal(regs, orig_i0); + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + } } diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c index 97cdd1bf4a1..ba5b09ad666 100644 --- a/arch/sparc64/kernel/signal32.c +++ b/arch/sparc64/kernel/signal32.c @@ -19,6 +19,7 @@ #include <linux/binfmts.h> #include <linux/compat.h> #include <linux/bitops.h> +#include <linux/tracehook.h> #include <asm/uaccess.h> #include <asm/ptrace.h> @@ -794,6 +795,8 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs, * clear the TS_RESTORE_SIGMASK flag. */ current_thread_info()->status &= ~TS_RESTORE_SIGMASK; + + tracehook_signal_handler(signr, &info, &ka, regs, 0); return; } if (restart_syscall && diff --git a/arch/sparc64/kernel/syscalls.S b/arch/sparc64/kernel/syscalls.S index db19ed67acf..a2f24270ed8 100644 --- a/arch/sparc64/kernel/syscalls.S +++ b/arch/sparc64/kernel/syscalls.S @@ -162,6 +162,8 @@ linux_syscall_trace32: add %sp, PTREGS_OFF, %o0 call syscall_trace clr %o1 + brnz,pn %o0, 3f + mov -ENOSYS, %o0 srl %i0, 0, %o0 srl %i4, 0, %o4 srl %i1, 0, %o1 @@ -173,6 +175,8 @@ linux_syscall_trace: add %sp, PTREGS_OFF, %o0 call syscall_trace clr %o1 + brnz,pn %o0, 3f + mov -ENOSYS, %o0 mov %i0, %o0 mov %i1, %o1 mov %i2, %o2 diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 71329747395..4e821b3ecb0 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -392,51 +392,6 @@ void __kprobes flush_icache_range(unsigned long start, unsigned long end) } } -void show_mem(void) -{ - unsigned long total = 0, reserved = 0; - unsigned long shared = 0, cached = 0; - pg_data_t *pgdat; - - printk(KERN_INFO "Mem-info:\n"); - show_free_areas(); - printk(KERN_INFO "Free swap: %6ldkB\n", - nr_swap_pages << (PAGE_SHIFT-10)); - for_each_online_pgdat(pgdat) { - unsigned long i, flags; - - pgdat_resize_lock(pgdat, &flags); - for (i = 0; i < pgdat->node_spanned_pages; i++) { - struct page *page = pgdat_page_nr(pgdat, i); - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - pgdat_resize_unlock(pgdat, &flags); - } - - printk(KERN_INFO "%lu pages of RAM\n", total); - printk(KERN_INFO "%lu reserved pages\n", reserved); - printk(KERN_INFO "%lu pages shared\n", shared); - printk(KERN_INFO "%lu pages swap cached\n", cached); - - printk(KERN_INFO "%lu pages dirty\n", - global_page_state(NR_FILE_DIRTY)); - printk(KERN_INFO "%lu pages writeback\n", - global_page_state(NR_WRITEBACK)); - printk(KERN_INFO "%lu pages mapped\n", - global_page_state(NR_FILE_MAPPED)); - printk(KERN_INFO "%lu pages slab\n", - global_page_state(NR_SLAB_RECLAIMABLE) + - global_page_state(NR_SLAB_UNRECLAIMABLE)); - printk(KERN_INFO "%lu pages pagetables\n", - global_page_state(NR_PAGETABLE)); -} - void mmu_info(struct seq_file *m) { if (tlb_type == cheetah) diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index e2274ef3155..61d7e6138ff 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -264,37 +264,6 @@ void free_initrd_mem(unsigned long start, unsigned long end) } #endif -void show_mem(void) -{ - int pfn, total = 0, reserved = 0; - int shared = 0, cached = 0; - int high_mem = 0; - struct page *page; - - printk(KERN_INFO "Mem-info:\n"); - show_free_areas(); - printk(KERN_INFO "Free swap: %6ldkB\n", - nr_swap_pages<<(PAGE_SHIFT-10)); - pfn = max_mapnr; - while (pfn-- > 0) { - page = pfn_to_page(pfn); - total++; - if (PageHighMem(page)) - high_mem++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - printk(KERN_INFO "%d pages of RAM\n", total); - printk(KERN_INFO "%d pages of HIGHMEM\n", high_mem); - printk(KERN_INFO "%d reserved pages\n", reserved); - printk(KERN_INFO "%d pages shared\n", shared); - printk(KERN_INFO "%d pages swap cached\n", cached); -} - /* Allocate and free page tables. */ pgd_t *pgd_alloc(struct mm_struct *mm) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e3cba0b4560..b6fa2877b17 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -22,8 +22,9 @@ config X86 select HAVE_IDE select HAVE_OPROFILE select HAVE_IOREMAP_PROT + select HAVE_GET_USER_PAGES_FAST select HAVE_KPROBES - select ARCH_WANT_OPTIONAL_GPIOLIB if !X86_RDC321X + select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_KRETPROBES select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE @@ -332,20 +333,6 @@ config X86_BIGSMP endif -config X86_RDC321X - bool "RDC R-321x SoC" - depends on X86_32 - select M486 - select X86_REBOOTFIXUPS - select GENERIC_GPIO - select LEDS_CLASS - select LEDS_GPIO - select NEW_LEDS - help - This option is needed for RDC R-321x system-on-chip, also known - as R-8610-(G). - If you don't have one of these chips, you should say N here. - config X86_VSMP bool "Support for ScaleMP vSMP" select PARAVIRT @@ -369,6 +356,16 @@ config X86_VISWS A kernel compiled for the Visual Workstation will run on general PCs as well. See <file:Documentation/sgi-visws.txt> for details. +config X86_RDC321X + bool "RDC R-321x SoC" + depends on X86_32 + select M486 + select X86_REBOOTFIXUPS + help + This option is needed for RDC R-321x system-on-chip, also known + as R-8610-(G). + If you don't have one of these chips, you should say N here. + config SCHED_NO_NO_OMIT_FRAME_POINTER def_bool y prompt "Single-depth WCHAN output" @@ -1279,6 +1276,14 @@ config CRASH_DUMP (CONFIG_RELOCATABLE=y). For more details see Documentation/kdump/kdump.txt +config KEXEC_JUMP + bool "kexec jump (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on KEXEC && HIBERNATION && X86_32 + help + Jump between original kernel and kexeced kernel and invoke + code in physical address mode via KEXEC + config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) default "0x1000000" if X86_NUMAQ diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 919ce21ea65..f5631da585b 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -118,11 +118,6 @@ mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic fcore-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/ mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default/ -# RDC R-321x subarch support -mflags-$(CONFIG_X86_RDC321X) := -Iinclude/asm-x86/mach-rdc321x -mcore-$(CONFIG_X86_RDC321X) := arch/x86/mach-default/ -core-$(CONFIG_X86_RDC321X) += arch/x86/mach-rdc321x/ - # default subarch .h files mflags-y += -Iinclude/asm-x86/mach-default diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c index 58cccb6483b..a0e1dbe67dc 100644 --- a/arch/x86/ia32/ia32_aout.c +++ b/arch/x86/ia32/ia32_aout.c @@ -441,12 +441,6 @@ beyond_if: regs->r8 = regs->r9 = regs->r10 = regs->r11 = regs->r12 = regs->r13 = regs->r14 = regs->r15 = 0; set_fs(USER_DS); - if (unlikely(current->ptrace & PT_PTRACED)) { - if (current->ptrace & PT_TRACE_EXEC) - ptrace_notify((PTRACE_EVENT_EXEC << 8) | SIGTRAP); - else - send_sig(SIGTRAP, current, 0); - } return 0; } diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 79eff735fde..22d7d050905 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -664,7 +664,7 @@ static int get_device_resources(struct device *dev, _bdf = calc_devid(pcidev->bus->number, pcidev->devfn); /* device not translated by any IOMMU in the system? */ - if (_bdf >= amd_iommu_last_bdf) { + if (_bdf > amd_iommu_last_bdf) { *iommu = NULL; *domain = NULL; *bdf = 0xffff; @@ -1082,7 +1082,7 @@ void prealloc_protection_domains(void) while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { devid = (dev->bus->number << 8) | dev->devfn; - if (devid >= amd_iommu_last_bdf) + if (devid > amd_iommu_last_bdf) continue; devid = amd_iommu_alias_table[devid]; if (domain_for_device(devid)) diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index c9d8ff2eb13..d9a9da597e7 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -732,7 +732,7 @@ static int __init init_exclusion_range(struct ivmd_header *m) set_device_exclusion_range(m->devid, m); break; case ACPI_IVMD_TYPE_ALL: - for (i = 0; i < amd_iommu_last_bdf; ++i) + for (i = 0; i <= amd_iommu_last_bdf; ++i) set_device_exclusion_range(i, m); break; case ACPI_IVMD_TYPE_RANGE: @@ -934,7 +934,7 @@ int __init amd_iommu_init(void) /* * let all alias entries point to itself */ - for (i = 0; i < amd_iommu_last_bdf; ++i) + for (i = 0; i <= amd_iommu_last_bdf; ++i) amd_iommu_alias_table[i] = i; /* diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index f67e93441ca..a7010c3a377 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -456,9 +456,6 @@ is386: movl $2,%ecx # set MP 1: #endif /* CONFIG_SMP */ jmp *(initial_code) -.align 4 -ENTRY(initial_code) - .long i386_start_kernel /* * We depend on ET to be correct. This checks for 287/387. @@ -601,6 +598,11 @@ ignore_int: #endif iret +.section .cpuinit.data,"wa" +.align 4 +ENTRY(initial_code) + .long i386_start_kernel + .section .text /* * Real beginning of normal "text" segment diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c index 8864230d55a..9fe478d9840 100644 --- a/arch/x86/kernel/machine_kexec_32.c +++ b/arch/x86/kernel/machine_kexec_32.c @@ -22,6 +22,7 @@ #include <asm/cpufeature.h> #include <asm/desc.h> #include <asm/system.h> +#include <asm/cacheflush.h> #define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE))) static u32 kexec_pgd[1024] PAGE_ALIGNED; @@ -85,10 +86,12 @@ static void load_segments(void) * reboot code buffer to allow us to avoid allocations * later. * - * Currently nothing. + * Make control page executable. */ int machine_kexec_prepare(struct kimage *image) { + if (nx_enabled) + set_pages_x(image->control_code_page, 1); return 0; } @@ -98,27 +101,48 @@ int machine_kexec_prepare(struct kimage *image) */ void machine_kexec_cleanup(struct kimage *image) { + if (nx_enabled) + set_pages_nx(image->control_code_page, 1); } /* * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. */ -NORET_TYPE void machine_kexec(struct kimage *image) +void machine_kexec(struct kimage *image) { unsigned long page_list[PAGES_NR]; void *control_page; + asmlinkage unsigned long + (*relocate_kernel_ptr)(unsigned long indirection_page, + unsigned long control_page, + unsigned long start_address, + unsigned int has_pae, + unsigned int preserve_context); tracer_disable(); /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); + if (image->preserve_context) { +#ifdef CONFIG_X86_IO_APIC + /* We need to put APICs in legacy mode so that we can + * get timer interrupts in second kernel. kexec/kdump + * paths already have calls to disable_IO_APIC() in + * one form or other. kexec jump path also need + * one. + */ + disable_IO_APIC(); +#endif + } + control_page = page_address(image->control_code_page); - memcpy(control_page, relocate_kernel, PAGE_SIZE); + memcpy(control_page, relocate_kernel, PAGE_SIZE/2); + relocate_kernel_ptr = control_page; page_list[PA_CONTROL_PAGE] = __pa(control_page); - page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel; + page_list[VA_CONTROL_PAGE] = (unsigned long)control_page; page_list[PA_PGD] = __pa(kexec_pgd); page_list[VA_PGD] = (unsigned long)kexec_pgd; #ifdef CONFIG_X86_PAE @@ -131,6 +155,7 @@ NORET_TYPE void machine_kexec(struct kimage *image) page_list[VA_PTE_0] = (unsigned long)kexec_pte0; page_list[PA_PTE_1] = __pa(kexec_pte1); page_list[VA_PTE_1] = (unsigned long)kexec_pte1; + page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page) << PAGE_SHIFT); /* The segment registers are funny things, they have both a * visible and an invisible part. Whenever the visible part is @@ -149,8 +174,10 @@ NORET_TYPE void machine_kexec(struct kimage *image) set_idt(phys_to_virt(0),0); /* now call it */ - relocate_kernel((unsigned long)image->head, (unsigned long)page_list, - image->start, cpu_has_pae); + image->start = relocate_kernel_ptr((unsigned long)image->head, + (unsigned long)page_list, + image->start, cpu_has_pae, + image->preserve_context); } void arch_crash_save_vmcoreinfo(void) diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c index 9dd9262693a..c43caa3a91f 100644 --- a/arch/x86/kernel/machine_kexec_64.c +++ b/arch/x86/kernel/machine_kexec_64.c @@ -181,7 +181,7 @@ void machine_kexec_cleanup(struct kimage *image) * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. */ -NORET_TYPE void machine_kexec(struct kimage *image) +void machine_kexec(struct kimage *image) { unsigned long page_list[PAGES_NR]; void *control_page; diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c index 19e7fc7c2c4..b67a4b1d4ea 100644 --- a/arch/x86/kernel/pci-calgary_64.c +++ b/arch/x86/kernel/pci-calgary_64.c @@ -37,6 +37,7 @@ #include <linux/delay.h> #include <linux/scatterlist.h> #include <linux/iommu-helper.h> + #include <asm/iommu.h> #include <asm/calgary.h> #include <asm/tce.h> @@ -413,22 +414,6 @@ static void calgary_unmap_sg(struct device *dev, } } -static int calgary_nontranslate_map_sg(struct device* dev, - struct scatterlist *sg, int nelems, int direction) -{ - struct scatterlist *s; - int i; - - for_each_sg(sg, s, nelems, i) { - struct page *p = sg_page(s); - - BUG_ON(!p); - s->dma_address = virt_to_bus(sg_virt(s)); - s->dma_length = s->length; - } - return nelems; -} - static int calgary_map_sg(struct device *dev, struct scatterlist *sg, int nelems, int direction) { @@ -439,9 +424,6 @@ static int calgary_map_sg(struct device *dev, struct scatterlist *sg, unsigned long entry; int i; - if (!translation_enabled(tbl)) - return calgary_nontranslate_map_sg(dev, sg, nelems, direction); - for_each_sg(sg, s, nelems, i) { BUG_ON(!sg_page(s)); @@ -477,7 +459,6 @@ error: static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr, size_t size, int direction) { - dma_addr_t dma_handle = bad_dma_address; void *vaddr = phys_to_virt(paddr); unsigned long uaddr; unsigned int npages; @@ -486,12 +467,7 @@ static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr, uaddr = (unsigned long)vaddr; npages = num_dma_pages(uaddr, size); - if (translation_enabled(tbl)) - dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction); - else - dma_handle = virt_to_bus(vaddr); - - return dma_handle; + return iommu_alloc(dev, tbl, vaddr, npages, direction); } static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle, @@ -500,9 +476,6 @@ static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle, struct iommu_table *tbl = find_iommu_table(dev); unsigned int npages; - if (!translation_enabled(tbl)) - return; - npages = num_dma_pages(dma_handle, size); iommu_free(tbl, dma_handle, npages); } @@ -525,18 +498,12 @@ static void* calgary_alloc_coherent(struct device *dev, size_t size, goto error; memset(ret, 0, size); - if (translation_enabled(tbl)) { - /* set up tces to cover the allocated range */ - mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL); - if (mapping == bad_dma_address) - goto free; - - *dma_handle = mapping; - } else /* non translated slot */ - *dma_handle = virt_to_bus(ret); - + /* set up tces to cover the allocated range */ + mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL); + if (mapping == bad_dma_address) + goto free; + *dma_handle = mapping; return ret; - free: free_pages((unsigned long)ret, get_order(size)); ret = NULL; @@ -544,7 +511,7 @@ error: return ret; } -static const struct dma_mapping_ops calgary_dma_ops = { +static struct dma_mapping_ops calgary_dma_ops = { .alloc_coherent = calgary_alloc_coherent, .map_single = calgary_map_single, .unmap_single = calgary_unmap_single, @@ -1241,6 +1208,16 @@ static int __init calgary_init(void) goto error; } while (1); + dev = NULL; + for_each_pci_dev(dev) { + struct iommu_table *tbl; + + tbl = find_iommu_table(&dev->dev); + + if (translation_enabled(tbl)) + dev->dev.archdata.dma_ops = &calgary_dma_ops; + } + return ret; error: @@ -1262,6 +1239,7 @@ error: calgary_disable_translation(dev); calgary_free_bus(dev); pci_dev_put(dev); /* Undo calgary_init_one()'s pci_dev_get() */ + dev->dev.archdata.dma_ops = NULL; } while (1); return ret; @@ -1503,6 +1481,10 @@ void __init detect_calgary(void) printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, " "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size, debugging ? "enabled" : "disabled"); + + /* swiotlb for devices that aren't behind the Calgary. */ + if (max_pfn > MAX_DMA32_PFN) + swiotlb = 1; } return; @@ -1519,7 +1501,7 @@ int __init calgary_iommu_init(void) { int ret; - if (no_iommu || swiotlb) + if (no_iommu || (swiotlb && !calgary_detected)) return -ENODEV; if (!calgary_detected) @@ -1532,15 +1514,14 @@ int __init calgary_iommu_init(void) if (ret) { printk(KERN_ERR "PCI-DMA: Calgary init failed %d, " "falling back to no_iommu\n", ret); - if (max_pfn > MAX_DMA32_PFN) - printk(KERN_ERR "WARNING more than 4GB of memory, " - "32bit PCI may malfunction.\n"); return ret; } force_iommu = 1; bad_dma_address = 0x0; - dma_ops = &calgary_dma_ops; + /* dma_ops is set to swiotlb or nommu */ + if (!dma_ops) + dma_ops = &nommu_dma_ops; return 0; } diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index cbecb05551b..37544123896 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -11,7 +11,7 @@ static int forbid_dac __read_mostly; -const struct dma_mapping_ops *dma_ops; +struct dma_mapping_ops *dma_ops; EXPORT_SYMBOL(dma_ops); static int iommu_sac_force __read_mostly; @@ -312,6 +312,8 @@ static int dma_release_coherent(struct device *dev, int order, void *vaddr) int dma_supported(struct device *dev, u64 mask) { + struct dma_mapping_ops *ops = get_dma_ops(dev); + #ifdef CONFIG_PCI if (mask > 0xffffffff && forbid_dac > 0) { dev_info(dev, "PCI: Disallowing DAC for device\n"); @@ -319,8 +321,8 @@ int dma_supported(struct device *dev, u64 mask) } #endif - if (dma_ops->dma_supported) - return dma_ops->dma_supported(dev, mask); + if (ops->dma_supported) + return ops->dma_supported(dev, mask); /* Copied from i386. Doesn't make much sense, because it will only work for pci_alloc_coherent. @@ -367,6 +369,7 @@ void * dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) { + struct dma_mapping_ops *ops = get_dma_ops(dev); void *memory = NULL; struct page *page; unsigned long dma_mask = 0; @@ -435,8 +438,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, /* Let low level make its own zone decisions */ gfp &= ~(GFP_DMA32|GFP_DMA); - if (dma_ops->alloc_coherent) - return dma_ops->alloc_coherent(dev, size, + if (ops->alloc_coherent) + return ops->alloc_coherent(dev, size, dma_handle, gfp); return NULL; } @@ -448,14 +451,14 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, } } - if (dma_ops->alloc_coherent) { + if (ops->alloc_coherent) { free_pages((unsigned long)memory, get_order(size)); gfp &= ~(GFP_DMA|GFP_DMA32); - return dma_ops->alloc_coherent(dev, size, dma_handle, gfp); + return ops->alloc_coherent(dev, size, dma_handle, gfp); } - if (dma_ops->map_simple) { - *dma_handle = dma_ops->map_simple(dev, virt_to_phys(memory), + if (ops->map_simple) { + *dma_handle = ops->map_simple(dev, virt_to_phys(memory), size, PCI_DMA_BIDIRECTIONAL); if (*dma_handle != bad_dma_address) @@ -477,12 +480,14 @@ EXPORT_SYMBOL(dma_alloc_coherent); void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t bus) { + struct dma_mapping_ops *ops = get_dma_ops(dev); + int order = get_order(size); WARN_ON(irqs_disabled()); /* for portability */ if (dma_release_coherent(dev, order, vaddr)) return; - if (dma_ops->unmap_single) - dma_ops->unmap_single(dev, bus, size, 0); + if (ops->unmap_single) + ops->unmap_single(dev, bus, size, 0); free_pages((unsigned long)vaddr, order); } EXPORT_SYMBOL(dma_free_coherent); diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index c9824043156..49285f8fd4d 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -689,8 +689,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info) extern int agp_amd64_init(void); -static const struct dma_mapping_ops gart_dma_ops = { - .mapping_error = NULL, +static struct dma_mapping_ops gart_dma_ops = { .map_single = gart_map_single, .map_simple = gart_map_simple, .unmap_single = gart_unmap_single, diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c index 792b9179eff..3f91f71cdc3 100644 --- a/arch/x86/kernel/pci-nommu.c +++ b/arch/x86/kernel/pci-nommu.c @@ -72,21 +72,9 @@ static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg, return nents; } -/* Make sure we keep the same behaviour */ -static int nommu_mapping_error(dma_addr_t dma_addr) -{ -#ifdef CONFIG_X86_32 - return 0; -#else - return (dma_addr == bad_dma_address); -#endif -} - - -const struct dma_mapping_ops nommu_dma_ops = { +struct dma_mapping_ops nommu_dma_ops = { .map_single = nommu_map_single, .map_sg = nommu_map_sg, - .mapping_error = nommu_mapping_error, .is_phys = 1, }; diff --git a/arch/x86/kernel/pci-swiotlb_64.c b/arch/x86/kernel/pci-swiotlb_64.c index 20df839b9c2..c4ce0332759 100644 --- a/arch/x86/kernel/pci-swiotlb_64.c +++ b/arch/x86/kernel/pci-swiotlb_64.c @@ -18,7 +18,7 @@ swiotlb_map_single_phys(struct device *hwdev, phys_addr_t paddr, size_t size, return swiotlb_map_single(hwdev, phys_to_virt(paddr), size, direction); } -const struct dma_mapping_ops swiotlb_dma_ops = { +struct dma_mapping_ops swiotlb_dma_ops = { .mapping_error = swiotlb_dma_mapping_error, .alloc_coherent = swiotlb_alloc_coherent, .free_coherent = swiotlb_free_coherent, diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S index c30fe25d470..703310a9902 100644 --- a/arch/x86/kernel/relocate_kernel_32.S +++ b/arch/x86/kernel/relocate_kernel_32.S @@ -20,11 +20,44 @@ #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) #define PAE_PGD_ATTR (_PAGE_PRESENT) +/* control_page + PAGE_SIZE/2 ~ control_page + PAGE_SIZE * 3/4 are + * used to save some data for jumping back + */ +#define DATA(offset) (PAGE_SIZE/2+(offset)) + +/* Minimal CPU state */ +#define ESP DATA(0x0) +#define CR0 DATA(0x4) +#define CR3 DATA(0x8) +#define CR4 DATA(0xc) + +/* other data */ +#define CP_VA_CONTROL_PAGE DATA(0x10) +#define CP_PA_PGD DATA(0x14) +#define CP_PA_SWAP_PAGE DATA(0x18) +#define CP_PA_BACKUP_PAGES_MAP DATA(0x1c) + .text .align PAGE_SIZE .globl relocate_kernel relocate_kernel: - movl 8(%esp), %ebp /* list of pages */ + /* Save the CPU context, used for jumping back */ + + pushl %ebx + pushl %esi + pushl %edi + pushl %ebp + pushf + + movl 20+8(%esp), %ebp /* list of pages */ + movl PTR(VA_CONTROL_PAGE)(%ebp), %edi + movl %esp, ESP(%edi) + movl %cr0, %eax + movl %eax, CR0(%edi) + movl %cr3, %eax + movl %eax, CR3(%edi) + movl %cr4, %eax + movl %eax, CR4(%edi) #ifdef CONFIG_X86_PAE /* map the control page at its virtual address */ @@ -138,15 +171,25 @@ relocate_kernel: relocate_new_kernel: /* read the arguments and say goodbye to the stack */ - movl 4(%esp), %ebx /* page_list */ - movl 8(%esp), %ebp /* list of pages */ - movl 12(%esp), %edx /* start address */ - movl 16(%esp), %ecx /* cpu_has_pae */ + movl 20+4(%esp), %ebx /* page_list */ + movl 20+8(%esp), %ebp /* list of pages */ + movl 20+12(%esp), %edx /* start address */ + movl 20+16(%esp), %ecx /* cpu_has_pae */ + movl 20+20(%esp), %esi /* preserve_context */ /* zero out flags, and disable interrupts */ pushl $0 popfl + /* save some information for jumping back */ + movl PTR(VA_CONTROL_PAGE)(%ebp), %edi + movl %edi, CP_VA_CONTROL_PAGE(%edi) + movl PTR(PA_PGD)(%ebp), %eax + movl %eax, CP_PA_PGD(%edi) + movl PTR(PA_SWAP_PAGE)(%ebp), %eax + movl %eax, CP_PA_SWAP_PAGE(%edi) + movl %ebx, CP_PA_BACKUP_PAGES_MAP(%edi) + /* get physical address of control page now */ /* this is impossible after page table switch */ movl PTR(PA_CONTROL_PAGE)(%ebp), %edi @@ -197,8 +240,90 @@ identity_mapped: xorl %eax, %eax movl %eax, %cr3 + movl CP_PA_SWAP_PAGE(%edi), %eax + pushl %eax + pushl %ebx + call swap_pages + addl $8, %esp + + /* To be certain of avoiding problems with self-modifying code + * I need to execute a serializing instruction here. + * So I flush the TLB, it's handy, and not processor dependent. + */ + xorl %eax, %eax + movl %eax, %cr3 + + /* set all of the registers to known values */ + /* leave %esp alone */ + + testl %esi, %esi + jnz 1f + xorl %edi, %edi + xorl %eax, %eax + xorl %ebx, %ebx + xorl %ecx, %ecx + xorl %edx, %edx + xorl %esi, %esi + xorl %ebp, %ebp + ret +1: + popl %edx + movl CP_PA_SWAP_PAGE(%edi), %esp + addl $PAGE_SIZE, %esp +2: + call *%edx + + /* get the re-entry point of the peer system */ + movl 0(%esp), %ebp + call 1f +1: + popl %ebx + subl $(1b - relocate_kernel), %ebx + movl CP_VA_CONTROL_PAGE(%ebx), %edi + lea PAGE_SIZE(%ebx), %esp + movl CP_PA_SWAP_PAGE(%ebx), %eax + movl CP_PA_BACKUP_PAGES_MAP(%ebx), %edx + pushl %eax + pushl %edx + call swap_pages + addl $8, %esp + movl CP_PA_PGD(%ebx), %eax + movl %eax, %cr3 + movl %cr0, %eax + orl $(1<<31), %eax + movl %eax, %cr0 + lea PAGE_SIZE(%edi), %esp + movl %edi, %eax + addl $(virtual_mapped - relocate_kernel), %eax + pushl %eax + ret + +virtual_mapped: + movl CR4(%edi), %eax + movl %eax, %cr4 + movl CR3(%edi), %eax + movl %eax, %cr3 + movl CR0(%edi), %eax + movl %eax, %cr0 + movl ESP(%edi), %esp + movl %ebp, %eax + + popf + popl %ebp + popl %edi + popl %esi + popl %ebx + ret + /* Do the copies */ - movl %ebx, %ecx +swap_pages: + movl 8(%esp), %edx + movl 4(%esp), %ecx + pushl %ebp + pushl %ebx + pushl %edi + pushl %esi + movl %ecx, %ebx jmp 1f 0: /* top, read another word from the indirection page */ @@ -226,27 +351,28 @@ identity_mapped: movl %ecx, %esi /* For every source page do a copy */ andl $0xfffff000, %esi + movl %edi, %eax + movl %esi, %ebp + + movl %edx, %edi movl $1024, %ecx rep ; movsl - jmp 0b -3: - - /* To be certain of avoiding problems with self-modifying code - * I need to execute a serializing instruction here. - * So I flush the TLB, it's handy, and not processor dependent. - */ - xorl %eax, %eax - movl %eax, %cr3 + movl %ebp, %edi + movl %eax, %esi + movl $1024, %ecx + rep ; movsl - /* set all of the registers to known values */ - /* leave %esp alone */ + movl %eax, %edi + movl %edx, %esi + movl $1024, %ecx + rep ; movsl - xorl %eax, %eax - xorl %ebx, %ebx - xorl %ecx, %ecx - xorl %edx, %edx - xorl %esi, %esi - xorl %edi, %edi - xorl %ebp, %ebp + lea PAGE_SIZE(%ebp), %esi + jmp 0b +3: + popl %esi + popl %edi + popl %ebx + popl %ebp ret diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index b0e4ddca6c1..2fa231923cf 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -1814,6 +1814,7 @@ int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva) spin_unlock(&vcpu->kvm->mmu_lock); return r; } +EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page_virt); void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu) { @@ -1870,6 +1871,12 @@ void kvm_enable_tdp(void) } EXPORT_SYMBOL_GPL(kvm_enable_tdp); +void kvm_disable_tdp(void) +{ + tdp_enabled = false; +} +EXPORT_SYMBOL_GPL(kvm_disable_tdp); + static void free_mmu_pages(struct kvm_vcpu *vcpu) { struct kvm_mmu_page *sp; diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index b756e876dce..e2ee264740c 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -453,7 +453,8 @@ static __init int svm_hardware_setup(void) if (npt_enabled) { printk(KERN_INFO "kvm: Nested Paging enabled\n"); kvm_enable_tdp(); - } + } else + kvm_disable_tdp(); return 0; @@ -1007,10 +1008,13 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run) struct kvm *kvm = svm->vcpu.kvm; u64 fault_address; u32 error_code; + bool event_injection = false; if (!irqchip_in_kernel(kvm) && - is_external_interrupt(exit_int_info)) + is_external_interrupt(exit_int_info)) { + event_injection = true; push_irq(&svm->vcpu, exit_int_info & SVM_EVTINJ_VEC_MASK); + } fault_address = svm->vmcb->control.exit_info_2; error_code = svm->vmcb->control.exit_info_1; @@ -1024,6 +1028,8 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run) (u32)fault_address, (u32)(fault_address >> 32), handler); + if (event_injection) + kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address); return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code); } diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 0cac6370171..2a69773e3b2 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -2298,6 +2298,8 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) cr2 = vmcs_readl(EXIT_QUALIFICATION); KVMTRACE_3D(PAGE_FAULT, vcpu, error_code, (u32)cr2, (u32)((u64)cr2 >> 32), handler); + if (vect_info & VECTORING_INFO_VALID_MASK) + kvm_mmu_unprotect_page_virt(vcpu, cr2); return kvm_mmu_page_fault(vcpu, cr2, error_code); } @@ -3116,15 +3118,6 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id) return ERR_PTR(-ENOMEM); allocate_vpid(vmx); - if (id == 0 && vm_need_ept()) { - kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK | - VMX_EPT_WRITABLE_MASK | - VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT); - kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK, - VMX_EPT_FAKE_DIRTY_MASK, 0ull, - VMX_EPT_EXECUTABLE_MASK); - kvm_enable_tdp(); - } err = kvm_vcpu_init(&vmx->vcpu, kvm, id); if (err) @@ -3303,8 +3296,17 @@ static int __init vmx_init(void) vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_ESP); vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_EIP); - if (cpu_has_vmx_ept()) + if (vm_need_ept()) { bypass_guest_pf = 0; + kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK | + VMX_EPT_WRITABLE_MASK | + VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT); + kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK, + VMX_EPT_FAKE_DIRTY_MASK, 0ull, + VMX_EPT_EXECUTABLE_MASK); + kvm_enable_tdp(); + } else + kvm_disable_tdp(); if (bypass_guest_pf) kvm_mmu_set_nonpresent_ptes(~0xffeull, 0ull); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 9f1cdb011cf..5916191420c 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -3184,6 +3184,10 @@ static void seg_desct_to_kvm_desct(struct desc_struct *seg_desc, u16 selector, kvm_desct->base |= seg_desc->base2 << 24; kvm_desct->limit = seg_desc->limit0; kvm_desct->limit |= seg_desc->limit << 16; + if (seg_desc->g) { + kvm_desct->limit <<= 12; + kvm_desct->limit |= 0xfff; + } kvm_desct->selector = selector; kvm_desct->type = seg_desc->type; kvm_desct->present = seg_desc->p; @@ -3223,6 +3227,7 @@ static void get_segment_descritptor_dtable(struct kvm_vcpu *vcpu, static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector, struct desc_struct *seg_desc) { + gpa_t gpa; struct descriptor_table dtable; u16 index = selector >> 3; @@ -3232,13 +3237,16 @@ static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector, kvm_queue_exception_e(vcpu, GP_VECTOR, selector & 0xfffc); return 1; } - return kvm_read_guest(vcpu->kvm, dtable.base + index * 8, seg_desc, 8); + gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base); + gpa += index * 8; + return kvm_read_guest(vcpu->kvm, gpa, seg_desc, 8); } /* allowed just for 8 bytes segments */ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector, struct desc_struct *seg_desc) { + gpa_t gpa; struct descriptor_table dtable; u16 index = selector >> 3; @@ -3246,7 +3254,9 @@ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector, if (dtable.limit < index * 8 + 7) return 1; - return kvm_write_guest(vcpu->kvm, dtable.base + index * 8, seg_desc, 8); + gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base); + gpa += index * 8; + return kvm_write_guest(vcpu->kvm, gpa, seg_desc, 8); } static u32 get_tss_base_addr(struct kvm_vcpu *vcpu, @@ -3258,55 +3268,7 @@ static u32 get_tss_base_addr(struct kvm_vcpu *vcpu, base_addr |= (seg_desc->base1 << 16); base_addr |= (seg_desc->base2 << 24); - return base_addr; -} - -static int load_tss_segment32(struct kvm_vcpu *vcpu, - struct desc_struct *seg_desc, - struct tss_segment_32 *tss) -{ - u32 base_addr; - - base_addr = get_tss_base_addr(vcpu, seg_desc); - - return kvm_read_guest(vcpu->kvm, base_addr, tss, - sizeof(struct tss_segment_32)); -} - -static int save_tss_segment32(struct kvm_vcpu *vcpu, - struct desc_struct *seg_desc, - struct tss_segment_32 *tss) -{ - u32 base_addr; - - base_addr = get_tss_base_addr(vcpu, seg_desc); - - return kvm_write_guest(vcpu->kvm, base_addr, tss, - sizeof(struct tss_segment_32)); -} - -static int load_tss_segment16(struct kvm_vcpu *vcpu, - struct desc_struct *seg_desc, - struct tss_segment_16 *tss) -{ - u32 base_addr; - - base_addr = get_tss_base_addr(vcpu, seg_desc); - - return kvm_read_guest(vcpu->kvm, base_addr, tss, - sizeof(struct tss_segment_16)); -} - -static int save_tss_segment16(struct kvm_vcpu *vcpu, - struct desc_struct *seg_desc, - struct tss_segment_16 *tss) -{ - u32 base_addr; - - base_addr = get_tss_base_addr(vcpu, seg_desc); - - return kvm_write_guest(vcpu->kvm, base_addr, tss, - sizeof(struct tss_segment_16)); + return vcpu->arch.mmu.gva_to_gpa(vcpu, base_addr); } static u16 get_segment_selector(struct kvm_vcpu *vcpu, int seg) @@ -3466,20 +3428,26 @@ static int load_state_from_tss16(struct kvm_vcpu *vcpu, } static int kvm_task_switch_16(struct kvm_vcpu *vcpu, u16 tss_selector, - struct desc_struct *cseg_desc, + u32 old_tss_base, struct desc_struct *nseg_desc) { struct tss_segment_16 tss_segment_16; int ret = 0; - if (load_tss_segment16(vcpu, cseg_desc, &tss_segment_16)) + if (kvm_read_guest(vcpu->kvm, old_tss_base, &tss_segment_16, + sizeof tss_segment_16)) goto out; save_state_to_tss16(vcpu, &tss_segment_16); - save_tss_segment16(vcpu, cseg_desc, &tss_segment_16); - if (load_tss_segment16(vcpu, nseg_desc, &tss_segment_16)) + if (kvm_write_guest(vcpu->kvm, old_tss_base, &tss_segment_16, + sizeof tss_segment_16)) goto out; + + if (kvm_read_guest(vcpu->kvm, get_tss_base_addr(vcpu, nseg_desc), + &tss_segment_16, sizeof tss_segment_16)) + goto out; + if (load_state_from_tss16(vcpu, &tss_segment_16)) goto out; @@ -3489,20 +3457,26 @@ out: } static int kvm_task_switch_32(struct kvm_vcpu *vcpu, u16 tss_selector, - struct desc_struct *cseg_desc, + u32 old_tss_base, struct desc_struct *nseg_desc) { struct tss_segment_32 tss_segment_32; int ret = 0; - if (load_tss_segment32(vcpu, cseg_desc, &tss_segment_32)) + if (kvm_read_guest(vcpu->kvm, old_tss_base, &tss_segment_32, + sizeof tss_segment_32)) goto out; save_state_to_tss32(vcpu, &tss_segment_32); - save_tss_segment32(vcpu, cseg_desc, &tss_segment_32); - if (load_tss_segment32(vcpu, nseg_desc, &tss_segment_32)) + if (kvm_write_guest(vcpu->kvm, old_tss_base, &tss_segment_32, + sizeof tss_segment_32)) + goto out; + + if (kvm_read_guest(vcpu->kvm, get_tss_base_addr(vcpu, nseg_desc), + &tss_segment_32, sizeof tss_segment_32)) goto out; + if (load_state_from_tss32(vcpu, &tss_segment_32)) goto out; @@ -3517,16 +3491,20 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason) struct desc_struct cseg_desc; struct desc_struct nseg_desc; int ret = 0; + u32 old_tss_base = get_segment_base(vcpu, VCPU_SREG_TR); + u16 old_tss_sel = get_segment_selector(vcpu, VCPU_SREG_TR); - kvm_get_segment(vcpu, &tr_seg, VCPU_SREG_TR); + old_tss_base = vcpu->arch.mmu.gva_to_gpa(vcpu, old_tss_base); + /* FIXME: Handle errors. Failure to read either TSS or their + * descriptors should generate a pagefault. + */ if (load_guest_segment_descriptor(vcpu, tss_selector, &nseg_desc)) goto out; - if (load_guest_segment_descriptor(vcpu, tr_seg.selector, &cseg_desc)) + if (load_guest_segment_descriptor(vcpu, old_tss_sel, &cseg_desc)) goto out; - if (reason != TASK_SWITCH_IRET) { int cpl; @@ -3544,8 +3522,7 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason) if (reason == TASK_SWITCH_IRET || reason == TASK_SWITCH_JMP) { cseg_desc.type &= ~(1 << 1); //clear the B flag - save_guest_segment_descriptor(vcpu, tr_seg.selector, - &cseg_desc); + save_guest_segment_descriptor(vcpu, old_tss_sel, &cseg_desc); } if (reason == TASK_SWITCH_IRET) { @@ -3557,10 +3534,10 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason) kvm_x86_ops->cache_regs(vcpu); if (nseg_desc.type & 8) - ret = kvm_task_switch_32(vcpu, tss_selector, &cseg_desc, + ret = kvm_task_switch_32(vcpu, tss_selector, old_tss_base, &nseg_desc); else - ret = kvm_task_switch_16(vcpu, tss_selector, &cseg_desc, + ret = kvm_task_switch_16(vcpu, tss_selector, old_tss_base, &nseg_desc); if (reason == TASK_SWITCH_CALL || reason == TASK_SWITCH_GATE) { diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile index 1fbb844c3d7..2977ea37791 100644 --- a/arch/x86/mm/Makefile +++ b/arch/x86/mm/Makefile @@ -1,6 +1,7 @@ obj-y := init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \ pat.o pgtable.o +obj-$(CONFIG_HAVE_GET_USER_PAGES_FAST) += gup.o obj-$(CONFIG_X86_32) += pgtable_32.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c new file mode 100644 index 00000000000..3085f25b435 --- /dev/null +++ b/arch/x86/mm/gup.c @@ -0,0 +1,295 @@ +/* + * Lockless get_user_pages_fast for x86 + * + * Copyright (C) 2008 Nick Piggin + * Copyright (C) 2008 Novell Inc. + */ +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/vmstat.h> +#include <linux/highmem.h> + +#include <asm/pgtable.h> + +static inline pte_t gup_get_pte(pte_t *ptep) +{ +#ifndef CONFIG_X86_PAE + return *ptep; +#else + /* + * With get_user_pages_fast, we walk down the pagetables without taking + * any locks. For this we would like to load the pointers atoimcally, + * but that is not possible (without expensive cmpxchg8b) on PAE. What + * we do have is the guarantee that a pte will only either go from not + * present to present, or present to not present or both -- it will not + * switch to a completely different present page without a TLB flush in + * between; something that we are blocking by holding interrupts off. + * + * Setting ptes from not present to present goes: + * ptep->pte_high = h; + * smp_wmb(); + * ptep->pte_low = l; + * + * And present to not present goes: + * ptep->pte_low = 0; + * smp_wmb(); + * ptep->pte_high = 0; + * + * We must ensure here that the load of pte_low sees l iff pte_high + * sees h. We load pte_high *after* loading pte_low, which ensures we + * don't see an older value of pte_high. *Then* we recheck pte_low, + * which ensures that we haven't picked up a changed pte high. We might + * have got rubbish values from pte_low and pte_high, but we are + * guaranteed that pte_low will not have the present bit set *unless* + * it is 'l'. And get_user_pages_fast only operates on present ptes, so + * we're safe. + * + * gup_get_pte should not be used or copied outside gup.c without being + * very careful -- it does not atomically load the pte or anything that + * is likely to be useful for you. + */ + pte_t pte; + +retry: + pte.pte_low = ptep->pte_low; + smp_rmb(); + pte.pte_high = ptep->pte_high; + smp_rmb(); + if (unlikely(pte.pte_low != ptep->pte_low)) + goto retry; + + return pte; +#endif +} + +/* + * The performance critical leaf functions are made noinline otherwise gcc + * inlines everything into a single function which results in too much + * register pressure. + */ +static noinline int gup_pte_range(pmd_t pmd, unsigned long addr, + unsigned long end, int write, struct page **pages, int *nr) +{ + unsigned long mask; + pte_t *ptep; + + mask = _PAGE_PRESENT|_PAGE_USER; + if (write) + mask |= _PAGE_RW; + + ptep = pte_offset_map(&pmd, addr); + do { + pte_t pte = gup_get_pte(ptep); + struct page *page; + + if ((pte_val(pte) & (mask | _PAGE_SPECIAL)) != mask) { + pte_unmap(ptep); + return 0; + } + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + page = pte_page(pte); + get_page(page); + pages[*nr] = page; + (*nr)++; + + } while (ptep++, addr += PAGE_SIZE, addr != end); + pte_unmap(ptep - 1); + + return 1; +} + +static inline void get_head_page_multiple(struct page *page, int nr) +{ + VM_BUG_ON(page != compound_head(page)); + VM_BUG_ON(page_count(page) == 0); + atomic_add(nr, &page->_count); +} + +static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr, + unsigned long end, int write, struct page **pages, int *nr) +{ + unsigned long mask; + pte_t pte = *(pte_t *)&pmd; + struct page *head, *page; + int refs; + + mask = _PAGE_PRESENT|_PAGE_USER; + if (write) + mask |= _PAGE_RW; + if ((pte_val(pte) & mask) != mask) + return 0; + /* hugepages are never "special" */ + VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL); + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + + refs = 0; + head = pte_page(pte); + page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT); + do { + VM_BUG_ON(compound_head(page) != head); + pages[*nr] = page; + (*nr)++; + page++; + refs++; + } while (addr += PAGE_SIZE, addr != end); + get_head_page_multiple(head, refs); + + return 1; +} + +static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long next; + pmd_t *pmdp; + + pmdp = pmd_offset(&pud, addr); + do { + pmd_t pmd = *pmdp; + + next = pmd_addr_end(addr, end); + if (pmd_none(pmd)) + return 0; + if (unlikely(pmd_large(pmd))) { + if (!gup_huge_pmd(pmd, addr, next, write, pages, nr)) + return 0; + } else { + if (!gup_pte_range(pmd, addr, next, write, pages, nr)) + return 0; + } + } while (pmdp++, addr = next, addr != end); + + return 1; +} + +static noinline int gup_huge_pud(pud_t pud, unsigned long addr, + unsigned long end, int write, struct page **pages, int *nr) +{ + unsigned long mask; + pte_t pte = *(pte_t *)&pud; + struct page *head, *page; + int refs; + + mask = _PAGE_PRESENT|_PAGE_USER; + if (write) + mask |= _PAGE_RW; + if ((pte_val(pte) & mask) != mask) + return 0; + /* hugepages are never "special" */ + VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL); + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + + refs = 0; + head = pte_page(pte); + page = head + ((addr & ~PUD_MASK) >> PAGE_SHIFT); + do { + VM_BUG_ON(compound_head(page) != head); + pages[*nr] = page; + (*nr)++; + page++; + refs++; + } while (addr += PAGE_SIZE, addr != end); + get_head_page_multiple(head, refs); + + return 1; +} + +static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long next; + pud_t *pudp; + + pudp = pud_offset(&pgd, addr); + do { + pud_t pud = *pudp; + + next = pud_addr_end(addr, end); + if (pud_none(pud)) + return 0; + if (unlikely(pud_large(pud))) { + if (!gup_huge_pud(pud, addr, next, write, pages, nr)) + return 0; + } else { + if (!gup_pmd_range(pud, addr, next, write, pages, nr)) + return 0; + } + } while (pudp++, addr = next, addr != end); + + return 1; +} + +int get_user_pages_fast(unsigned long start, int nr_pages, int write, + struct page **pages) +{ + struct mm_struct *mm = current->mm; + unsigned long end = start + (nr_pages << PAGE_SHIFT); + unsigned long addr = start; + unsigned long next; + pgd_t *pgdp; + int nr = 0; + + if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ, + start, nr_pages*PAGE_SIZE))) + goto slow_irqon; + + /* + * XXX: batch / limit 'nr', to avoid large irq off latency + * needs some instrumenting to determine the common sizes used by + * important workloads (eg. DB2), and whether limiting the batch size + * will decrease performance. + * + * It seems like we're in the clear for the moment. Direct-IO is + * the main guy that batches up lots of get_user_pages, and even + * they are limited to 64-at-a-time which is not so many. + */ + /* + * This doesn't prevent pagetable teardown, but does prevent + * the pagetables and pages from being freed on x86. + * + * So long as we atomically load page table pointers versus teardown + * (which we do on x86, with the above PAE exception), we can follow the + * address down to the the page and take a ref on it. + */ + local_irq_disable(); + pgdp = pgd_offset(mm, addr); + do { + pgd_t pgd = *pgdp; + + next = pgd_addr_end(addr, end); + if (pgd_none(pgd)) + goto slow; + if (!gup_pud_range(pgd, addr, next, write, pages, &nr)) + goto slow; + } while (pgdp++, addr = next, addr != end); + local_irq_enable(); + + VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT); + return nr; + + { + int ret; + +slow: + local_irq_enable(); +slow_irqon: + /* Try to get the remaining pages with get_user_pages */ + start += nr << PAGE_SHIFT; + pages += nr; + + down_read(&mm->mmap_sem); + ret = get_user_pages(current, mm, start, + (end - start) >> PAGE_SHIFT, write, 0, pages, NULL); + up_read(&mm->mmap_sem); + + /* Have to be a bit careful with return values */ + if (nr > 0) { + if (ret < 0) + ret = nr; + else + ret += nr; + } + + return ret; + } +} diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index ec37121f670..129618ca0ea 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -86,43 +86,6 @@ early_param("gbpages", parse_direct_gbpages_on); * around without checking the pgd every time. */ -void show_mem(void) -{ - long i, total = 0, reserved = 0; - long shared = 0, cached = 0; - struct page *page; - pg_data_t *pgdat; - - printk(KERN_INFO "Mem-info:\n"); - show_free_areas(); - for_each_online_pgdat(pgdat) { - for (i = 0; i < pgdat->node_spanned_pages; ++i) { - /* - * This loop can take a while with 256 GB and - * 4k pages so defer the NMI watchdog: - */ - if (unlikely(i % MAX_ORDER_NR_PAGES == 0)) - touch_nmi_watchdog(); - - if (!pfn_valid(pgdat->node_start_pfn + i)) - continue; - - page = pfn_to_page(pgdat->node_start_pfn + i); - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - } - printk(KERN_INFO "%lu pages of RAM\n", total); - printk(KERN_INFO "%lu reserved pages\n", reserved); - printk(KERN_INFO "%lu pages shared\n", shared); - printk(KERN_INFO "%lu pages swap cached\n", cached); -} - int after_bootmem; static __init void *spp_getpage(void) diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c index b4becbf8c57..cab0abbd1eb 100644 --- a/arch/x86/mm/pgtable_32.c +++ b/arch/x86/mm/pgtable_32.c @@ -20,53 +20,6 @@ #include <asm/tlb.h> #include <asm/tlbflush.h> -void show_mem(void) -{ - int total = 0, reserved = 0; - int shared = 0, cached = 0; - int highmem = 0; - struct page *page; - pg_data_t *pgdat; - unsigned long i; - unsigned long flags; - - printk(KERN_INFO "Mem-info:\n"); - show_free_areas(); - for_each_online_pgdat(pgdat) { - pgdat_resize_lock(pgdat, &flags); - for (i = 0; i < pgdat->node_spanned_pages; ++i) { - if (unlikely(i % MAX_ORDER_NR_PAGES == 0)) - touch_nmi_watchdog(); - page = pgdat_page_nr(pgdat, i); - total++; - if (PageHighMem(page)) - highmem++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - pgdat_resize_unlock(pgdat, &flags); - } - printk(KERN_INFO "%d pages of RAM\n", total); - printk(KERN_INFO "%d pages of HIGHMEM\n", highmem); - printk(KERN_INFO "%d reserved pages\n", reserved); - printk(KERN_INFO "%d pages shared\n", shared); - printk(KERN_INFO "%d pages swap cached\n", cached); - - printk(KERN_INFO "%lu pages dirty\n", global_page_state(NR_FILE_DIRTY)); - printk(KERN_INFO "%lu pages writeback\n", - global_page_state(NR_WRITEBACK)); - printk(KERN_INFO "%lu pages mapped\n", global_page_state(NR_FILE_MAPPED)); - printk(KERN_INFO "%lu pages slab\n", - global_page_state(NR_SLAB_RECLAIMABLE) + - global_page_state(NR_SLAB_UNRECLAIMABLE)); - printk(KERN_INFO "%lu pages pagetables\n", - global_page_state(NR_PAGETABLE)); -} - /* * Associate a virtual page frame with a given physical page frame * and protection flags for that frame. diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c index 81d0560eaea..34163cfaaff 100644 --- a/arch/xtensa/mm/init.c +++ b/arch/xtensa/mm/init.c @@ -280,36 +280,9 @@ void free_initmem(void) (&__init_end - &__init_begin) >> 10); } -void show_mem(void) -{ - int i, free = 0, total = 0, reserved = 0; - int shared = 0, cached = 0; - - printk("Mem-info:\n"); - show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - i = max_mapnr; - while (i-- > 0) { - total++; - if (PageReserved(mem_map+i)) - reserved++; - else if (PageSwapCache(mem_map+i)) - cached++; - else if (!page_count(mem_map + i)) - free++; - else - shared += page_count(mem_map + i) - 1; - } - printk("%d pages of RAM\n", total); - printk("%d reserved pages\n", reserved); - printk("%d pages shared\n", shared); - printk("%d pages swap cached\n",cached); - printk("%d free pages\n", free); -} - struct kmem_cache *pgtable_cache __read_mostly; -static void pgd_ctor(struct kmem_cache *cache, void* addr) +static void pgd_ctor(void* addr) { pte_t* ptep = (pte_t*)addr; int i; |