diff options
Diffstat (limited to 'arch')
338 files changed, 16850 insertions, 9828 deletions
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index ec01f08f564..e101846ab7d 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -159,8 +159,7 @@ void __init init_IRQ(void) int irq; for (irq = 0; irq < NR_IRQS; irq++) - irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_DELAYED_DISABLE | - IRQ_NOPROBE; + irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE; #ifdef CONFIG_SMP bad_irq_desc.affinity = CPU_MASK_ALL; diff --git a/arch/arm/kernel/isa.c b/arch/arm/kernel/isa.c index 54bbd9fe255..50a30bc9187 100644 --- a/arch/arm/kernel/isa.c +++ b/arch/arm/kernel/isa.c @@ -70,5 +70,5 @@ register_isa_ports(unsigned int membase, unsigned int portbase, unsigned int por isa_membase = membase; isa_portbase = portbase; isa_portshift = portshift; - isa_sysctl_header = register_sysctl_table(ctl_bus, 0); + isa_sysctl_header = register_sysctl_table(ctl_bus); } diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index 40039b2a90b..2703a730baf 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -87,7 +87,7 @@ static struct clocksource clocksource_imx = { .read = imx_get_cycles, .mask = 0xFFFFFFFF, .shift = 20, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static int __init imx_clocksource_init(void) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 2ec9a9e9a04..45068c3d8dc 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -395,7 +395,7 @@ static struct clocksource clocksource_ixp4xx = { .read = ixp4xx_get_cycles, .mask = CLOCKSOURCE_MASK(32), .shift = 20, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; unsigned long ixp4xx_timer_freq = FREQ; diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c index 5773b55ef4a..7e132fcccd4 100644 --- a/arch/arm/mach-netx/time.c +++ b/arch/arm/mach-netx/time.c @@ -62,7 +62,7 @@ static struct clocksource clocksource_netx = { .read = netx_get_cycles, .mask = CLOCKSOURCE_MASK(32), .shift = 20, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; /* diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index ee2beb40041..fc3b82a740a 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -112,7 +112,7 @@ static struct clocksource clocksource_pxa = { .read = pxa_get_cycles, .mask = CLOCKSOURCE_MASK(32), .shift = 20, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static void __init pxa_timer_init(void) diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index d47e39f0e97..5974768a59e 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -8,7 +8,6 @@ * published by the Free Software Foundation. */ #include <linux/clk.h> -#include <linux/device.h> #include <linux/etherdevice.h> #include <linux/init.h> #include <linux/kernel.h> @@ -36,12 +35,11 @@ static struct eth_addr __initdata hw_addr[2]; static struct eth_platform_data __initdata eth_data[2]; extern struct lcdc_platform_data atstk1000_fb0_data; -static struct spi_board_info spi_board_info[] __initdata = { +static struct spi_board_info spi0_board_info[] __initdata = { { + /* QVGA display */ .modalias = "ltv350qv", - .controller_data = (void *)GPIO_PIN_PA(4), .max_speed_hz = 16000000, - .bus_num = 0, .chip_select = 1, }, }; @@ -149,8 +147,7 @@ static int __init atstk1002_init(void) set_hw_addr(at32_add_device_eth(0, ð_data[0])); - spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); - at32_add_device_spi(0); + at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); at32_add_device_lcdc(0, &atstk1000_fb0_data); return 0; diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S index db8f8b55ffd..7c279586fbb 100644 --- a/arch/avr32/kernel/syscall_table.S +++ b/arch/avr32/kernel/syscall_table.S @@ -8,14 +8,6 @@ * published by the Free Software Foundation. */ -#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE) -#define sys_nfsservctl sys_ni_syscall -#endif - -#if !defined(CONFIG_SYSV_IPC) -# define sys_ipc sys_ni_syscall -#endif - .section .rodata,"a",@progbits .type sys_call_table,@object .global sys_call_table @@ -129,7 +121,7 @@ sys_call_table: .long sys_getitimer /* 105 */ .long sys_swapoff .long sys_sysinfo - .long sys_ipc + .long sys_ni_syscall /* was sys_ipc briefly */ .long sys_sendfile .long sys_setdomainname /* 110 */ .long sys_newuname @@ -287,4 +279,16 @@ sys_call_table: .long sys_tee .long sys_vmsplice .long __sys_epoll_pwait /* 265 */ + .long sys_msgget + .long sys_msgsnd + .long sys_msgrcv + .long sys_msgctl + .long sys_semget /* 270 */ + .long sys_semop + .long sys_semctl + .long sys_semtimedop + .long sys_shmat + .long sys_shmget /* 275 */ + .long sys_shmdt + .long sys_shmctl .long sys_ni_syscall /* r8 is saturated at nr_syscalls */ diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index a2f74affaa9..c10833f2ee0 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -37,7 +37,7 @@ static struct clocksource clocksource_avr32 = { .read = read_cycle_count, .mask = CLOCKSOURCE_MASK(32), .shift = 16, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; /* diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c index c1e477ec757..bc235507c5c 100644 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -8,6 +8,7 @@ #include <linux/clk.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/spi/spi.h> #include <asm/io.h> @@ -310,8 +311,6 @@ static void genclk_mode(struct clk *clk, int enabled) { u32 control; - BUG_ON(clk->index > 7); - control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index); if (enabled) control |= SM_BIT(CEN); @@ -325,11 +324,6 @@ static unsigned long genclk_get_rate(struct clk *clk) u32 control; unsigned long div = 1; - BUG_ON(clk->index > 7); - - if (!clk->parent) - return 0; - control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index); if (control & SM_BIT(DIVEN)) div = 2 * (SM_BFEXT(DIV, control) + 1); @@ -342,11 +336,6 @@ static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply) u32 control; unsigned long parent_rate, actual_rate, div; - BUG_ON(clk->index > 7); - - if (!clk->parent) - return 0; - parent_rate = clk->parent->get_rate(clk->parent); control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index); @@ -373,11 +362,8 @@ int genclk_set_parent(struct clk *clk, struct clk *parent) { u32 control; - BUG_ON(clk->index > 7); - printk("clk %s: new parent %s (was %s)\n", - clk->name, parent->name, - clk->parent ? clk->parent->name : "(null)"); + clk->name, parent->name, clk->parent->name); control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index); @@ -399,6 +385,22 @@ int genclk_set_parent(struct clk *clk, struct clk *parent) return 0; } +static void __init genclk_init_parent(struct clk *clk) +{ + u32 control; + struct clk *parent; + + BUG_ON(clk->index > 7); + + control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index); + if (control & SM_BIT(OSCSEL)) + parent = (control & SM_BIT(PLLSEL)) ? &pll1 : &osc1; + else + parent = (control & SM_BIT(PLLSEL)) ? &pll0 : &osc0; + + clk->parent = parent; +} + /* -------------------------------------------------------------------- * System peripherals * -------------------------------------------------------------------- */ @@ -750,8 +752,41 @@ static struct resource atmel_spi1_resource[] = { DEFINE_DEV(atmel_spi, 1); DEV_CLK(spi_clk, atmel_spi1, pba, 1); -struct platform_device *__init at32_add_device_spi(unsigned int id) +static void +at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b, + unsigned int n, const u8 *pins) +{ + unsigned int pin, mode; + + for (; n; n--, b++) { + b->bus_num = bus_num; + if (b->chip_select >= 4) + continue; + pin = (unsigned)b->controller_data; + if (!pin) { + pin = pins[b->chip_select]; + b->controller_data = (void *)pin; + } + mode = AT32_GPIOF_OUTPUT; + if (!(b->mode & SPI_CS_HIGH)) + mode |= AT32_GPIOF_HIGH; + at32_select_gpio(pin, mode); + } +} + +struct platform_device *__init +at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n) { + /* + * Manage the chipselects as GPIOs, normally using the same pins + * the SPI controller expects; but boards can use other pins. + */ + static u8 __initdata spi0_pins[] = + { GPIO_PIN_PA(3), GPIO_PIN_PA(4), + GPIO_PIN_PA(5), GPIO_PIN_PA(20), }; + static u8 __initdata spi1_pins[] = + { GPIO_PIN_PB(2), GPIO_PIN_PB(3), + GPIO_PIN_PB(4), GPIO_PIN_PA(27), }; struct platform_device *pdev; switch (id) { @@ -760,14 +795,7 @@ struct platform_device *__init at32_add_device_spi(unsigned int id) select_peripheral(PA(0), PERIPH_A, 0); /* MISO */ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */ - - /* NPCS[2:0] */ - at32_select_gpio(GPIO_PIN_PA(3), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); - at32_select_gpio(GPIO_PIN_PA(4), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); - at32_select_gpio(GPIO_PIN_PA(5), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + at32_spi_setup_slaves(0, b, n, spi0_pins); break; case 1: @@ -775,20 +803,14 @@ struct platform_device *__init at32_add_device_spi(unsigned int id) select_peripheral(PB(0), PERIPH_B, 0); /* MISO */ select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */ - - /* NPCS[2:0] */ - at32_select_gpio(GPIO_PIN_PB(2), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); - at32_select_gpio(GPIO_PIN_PB(3), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); - at32_select_gpio(GPIO_PIN_PB(4), - AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + at32_spi_setup_slaves(1, b, n, spi1_pins); break; default: return NULL; } + spi_register_board_info(b, n); platform_device_register(pdev); return pdev; } @@ -872,6 +894,50 @@ at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data) return pdev; } +/* -------------------------------------------------------------------- + * GCLK + * -------------------------------------------------------------------- */ +static struct clk gclk0 = { + .name = "gclk0", + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 0, +}; +static struct clk gclk1 = { + .name = "gclk1", + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 1, +}; +static struct clk gclk2 = { + .name = "gclk2", + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 2, +}; +static struct clk gclk3 = { + .name = "gclk3", + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 3, +}; +static struct clk gclk4 = { + .name = "gclk4", + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 4, +}; + struct clk *at32_clock_list[] = { &osc32k, &osc0, @@ -908,6 +974,11 @@ struct clk *at32_clock_list[] = { &atmel_spi1_spi_clk, &lcdc0_hclk, &lcdc0_pixclk, + &gclk0, + &gclk1, + &gclk2, + &gclk3, + &gclk4, }; unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list); @@ -936,6 +1007,13 @@ void __init at32_clock_init(void) if (sm_readl(sm, PM_PLL1) & SM_BIT(PLLOSC)) pll1.parent = &osc1; + genclk_init_parent(&gclk0); + genclk_init_parent(&gclk1); + genclk_init_parent(&gclk2); + genclk_init_parent(&gclk3); + genclk_init_parent(&gclk4); + genclk_init_parent(&lcdc0_pixclk); + /* * Turn on all clocks that have at least one user already, and * turn off everything else. We only do this for module diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c index 3d0d1097389..49e7b12fe71 100644 --- a/arch/avr32/mach-at32ap/clock.c +++ b/arch/avr32/mach-at32ap/clock.c @@ -63,7 +63,11 @@ EXPORT_SYMBOL(clk_enable); static void __clk_disable(struct clk *clk) { - BUG_ON(clk->users == 0); + if (clk->users == 0) { + printk(KERN_ERR "%s: mismatched disable\n", clk->name); + WARN_ON(1); + return; + } if (--clk->users == 0 && clk->mode) clk->mode(clk, 0); diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c index ee677ced7b6..c57ce3f1f2e 100644 --- a/arch/frv/kernel/pm.c +++ b/arch/frv/kernel/pm.c @@ -125,7 +125,6 @@ unsigned long sleep_phys_sp(void *sp) * Use a temporary sysctl number. Horrid, but will be cleaned up in 2.6 * when all the PM interfaces exist nicely. */ -#define CTL_PM 9899 #define CTL_PM_SUSPEND 1 #define CTL_PM_CMODE 2 #define CTL_PM_P0 4 @@ -402,17 +401,53 @@ static int cm_sysctl(ctl_table *table, int __user *name, int nlen, static struct ctl_table pm_table[] = { - {CTL_PM_SUSPEND, "suspend", NULL, 0, 0200, NULL, &sysctl_pm_do_suspend}, - {CTL_PM_CMODE, "cmode", &clock_cmode_current, sizeof(int), 0644, NULL, &cmode_procctl, &cmode_sysctl, NULL}, - {CTL_PM_P0, "p0", &clock_p0_current, sizeof(int), 0644, NULL, &p0_procctl, &p0_sysctl, NULL}, - {CTL_PM_CM, "cm", &clock_cm_current, sizeof(int), 0644, NULL, &cm_procctl, &cm_sysctl, NULL}, - {0} + { + .ctl_name = CTL_PM_SUSPEND, + .procname = "suspend", + .data = NULL, + .maxlen = 0, + .mode = 0200, + .proc_handler = &sysctl_pm_do_suspend, + }, + { + .ctl_name = CTL_PM_CMODE, + .procname = "cmode", + .data = &clock_cmode_current, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &cmode_procctl, + .strategy = &cmode_sysctl, + }, + { + .ctl_name = CTL_PM_P0, + .procname = "p0", + .data = &clock_p0_current, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &p0_procctl, + .strategy = &p0_sysctl, + }, + { + .ctl_name = CTL_PM_CM, + .procname = "cm", + .data = &clock_cm_current, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &cm_procctl, + .strategy = &cm_sysctl, + }, + { .ctl_name = 0} }; static struct ctl_table pm_dir_table[] = { - {CTL_PM, "pm", NULL, 0, 0555, pm_table}, - {0} + { + .ctl_name = CTL_PM, + .procname = "pm", + .mode = 0555, + .child = pm_table, + }, + { .ctl_name = 0} }; /* @@ -420,7 +455,7 @@ static struct ctl_table pm_dir_table[] = */ static int __init pm_init(void) { - register_sysctl_table(pm_dir_table, 1); + register_sysctl_table(pm_dir_table); return 0; } diff --git a/arch/frv/kernel/sysctl.c b/arch/frv/kernel/sysctl.c index ce676803eb6..3e9d7e03fb9 100644 --- a/arch/frv/kernel/sysctl.c +++ b/arch/frv/kernel/sysctl.c @@ -175,22 +175,40 @@ static int procctl_frv_pin_cxnr(ctl_table *table, int write, struct file *filp, */ static struct ctl_table frv_table[] = { - { 1, "cache-mode", NULL, 0, 0644, NULL, &procctl_frv_cachemode }, + { + .ctl_name = 1, + .procname = "cache-mode", + .data = NULL, + .maxlen = 0, + .mode = 0644, + .proc_handler = &procctl_frv_cachemode, + }, #ifdef CONFIG_MMU - { 2, "pin-cxnr", NULL, 0, 0644, NULL, &procctl_frv_pin_cxnr }, + { + .ctl_name = 2, + .procname = "pin-cxnr", + .data = NULL, + .maxlen = 0, + .mode = 0644, + .proc_handler = &procctl_frv_pin_cxnr + }, #endif - { 0 } + {} }; /* * Use a temporary sysctl number. Horrid, but will be cleaned up in 2.6 * when all the PM interfaces exist nicely. */ -#define CTL_FRV 9898 static struct ctl_table frv_dir_table[] = { - {CTL_FRV, "frv", NULL, 0, 0555, frv_table}, - {0} + { + .ctl_name = CTL_FRV, + .procname = "frv", + .mode = 0555, + .child = frv_table + }, + {} }; /* @@ -198,7 +216,7 @@ static struct ctl_table frv_dir_table[] = */ static int __init frv_sysctl_init(void) { - register_sysctl_table(frv_dir_table, 1); + register_sysctl_table(frv_dir_table); return 0; } diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 63d5e841caf..1df4a1f1428 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -18,6 +18,18 @@ config GENERIC_TIME bool default y +config CLOCKSOURCE_WATCHDOG + bool + default y + +config GENERIC_CLOCKEVENTS + bool + default y + +config GENERIC_CLOCKEVENTS_BROADCAST + bool + default y + config LOCKDEP_SUPPORT bool default y @@ -74,6 +86,8 @@ source "init/Kconfig" menu "Processor type and features" +source "kernel/time/Kconfig" + config SMP bool "Symmetric multi-processing support" ---help--- @@ -203,6 +217,15 @@ config PARAVIRT However, when run without a hypervisor the kernel is theoretically slower. If in doubt, say N. +config VMI + bool "VMI Paravirt-ops support" + depends on PARAVIRT && !NO_HZ + default y + help + VMI provides a paravirtualized interface to multiple hypervisors + include VMware ESX server and Xen by connecting to a ROM module + provided by the hypervisor. + config ACPI_SRAT bool default y @@ -1263,3 +1286,12 @@ config X86_TRAMPOLINE config KTIME_SCALAR bool default y + +config NO_IDLE_HZ + bool + depends on PARAVIRT + default y + help + Switches the regular HZ timer off when the system is going idle. + This helps a hypervisor detect that the Linux system is idle, + reducing the overhead of idle systems. diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu index 2aecfba4ac4..b99c0e2a4e6 100644 --- a/arch/i386/Kconfig.cpu +++ b/arch/i386/Kconfig.cpu @@ -226,11 +226,6 @@ config X86_CMPXCHG depends on !M386 default y -config X86_XADD - bool - depends on !M386 - default y - config X86_L1_CACHE_SHIFT int default "7" if MPENTIUM4 || X86_GENERIC diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug index f68cc6f215f..458bc161193 100644 --- a/arch/i386/Kconfig.debug +++ b/arch/i386/Kconfig.debug @@ -87,7 +87,7 @@ config DOUBLEFAULT config DEBUG_PARAVIRT bool "Enable some paravirtualization debugging" - default y + default n depends on PARAVIRT && DEBUG_KERNEL help Currently deliberately clobbers regs which are allowed to be diff --git a/arch/i386/defconfig b/arch/i386/defconfig index bb0c376b62b..5ae1e0bc8fd 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc3 -# Fri Jan 5 11:54:46 2007 +# Linux kernel version: 2.6.20-git8 +# Tue Feb 13 11:25:18 2007 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y @@ -10,6 +10,7 @@ CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_X86=y CONFIG_MMU=y +CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y @@ -139,7 +140,6 @@ CONFIG_MPENTIUMIII=y # CONFIG_MVIAC3_2 is not set CONFIG_X86_GENERIC=y CONFIG_X86_CMPXCHG=y -CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set @@ -198,6 +198,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y @@ -211,6 +212,7 @@ CONFIG_HZ_250=y CONFIG_HZ=250 # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_PHYSICAL_START=0x100000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x100000 # CONFIG_HOTPLUG_CPU is not set @@ -229,13 +231,14 @@ CONFIG_PM_SYSFS_DEPRECATED=y # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y +CONFIG_ACPI_PROCFS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y -# CONFIG_ACPI_VIDEO is not set # CONFIG_ACPI_HOTKEY is not set CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set @@ -306,7 +309,6 @@ CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCIEPORTBUS is not set CONFIG_PCI_MSI=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set # CONFIG_HT_IRQ is not set CONFIG_ISA_DMA_API=y @@ -347,6 +349,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -446,6 +449,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -466,8 +470,7 @@ CONFIG_FW_LOADER=y # # Plug and Play support # -CONFIG_PNP=y -CONFIG_PNPACPI=y +# CONFIG_PNP is not set # # Block devices @@ -515,6 +518,7 @@ CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set +CONFIG_BLK_DEV_IDEACPI=y # CONFIG_IDE_TASK_IOCTL is not set # @@ -547,6 +551,7 @@ CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -557,6 +562,7 @@ CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -655,6 +661,7 @@ CONFIG_AIC79XX_DEBUG_MASK=0 # Serial ATA (prod) and Parallel ATA (experimental) drivers # CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_AHCI=y CONFIG_SATA_SVW=y CONFIG_ATA_PIIX=y @@ -670,6 +677,7 @@ CONFIG_SATA_SIL=y # CONFIG_SATA_ULI is not set CONFIG_SATA_VIA=y # CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set CONFIG_SATA_INTEL_COMBINED=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set @@ -687,6 +695,7 @@ CONFIG_SATA_INTEL_COMBINED=y # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set @@ -739,9 +748,7 @@ CONFIG_IEEE1394=y # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_OUI_DB is not set # CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set -# CONFIG_IEEE1394_EXPORT_FULL_API is not set # # Device Drivers @@ -767,6 +774,11 @@ CONFIG_IEEE1394_RAWIO=y # CONFIG_I2O is not set # +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set + +# # Network device support # CONFIG_NETDEVICES=y @@ -833,6 +845,7 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -855,11 +868,13 @@ CONFIG_SKY2=y CONFIG_TIGON3=y CONFIG_BNX2=y # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set @@ -1090,6 +1105,7 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y +CONFIG_OBSOLETE_OSS=y # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_ES1371 is not set CONFIG_SOUND_ICH=y @@ -1103,6 +1119,7 @@ CONFIG_SOUND_ICH=y # HID Devices # CONFIG_HID=y +# CONFIG_HID_DEBUG is not set # # USB support @@ -1117,10 +1134,8 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -1130,9 +1145,11 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -1183,6 +1200,7 @@ CONFIG_USB_HID=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -1288,6 +1306,10 @@ CONFIG_USB_MON=y # # +# Auxiliary Display support +# + +# # Virtualization # # CONFIG_KVM is not set @@ -1480,6 +1502,7 @@ CONFIG_UNUSED_SYMBOLS=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_LOG_BUF_SHIFT=18 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set @@ -1488,7 +1511,6 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1533,7 +1555,8 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 1e8988e558c..4ae3dcf1d2f 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_X86_CPUID) += cpuid.o obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_APM) += apm.o -obj-$(CONFIG_X86_SMP) += smp.o smpboot.o +obj-$(CONFIG_X86_SMP) += smp.o smpboot.o tsc_sync.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o obj-$(CONFIG_X86_MPPARSE) += mpparse.o obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o @@ -32,7 +32,6 @@ obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_MODULES) += module.o obj-y += sysenter.o vsyscall.o obj-$(CONFIG_ACPI_SRAT) += srat.o -obj-$(CONFIG_HPET_TIMER) += time_hpet.o obj-$(CONFIG_EFI) += efi.o efi_stub.o obj-$(CONFIG_DOUBLEFAULT) += doublefault.o obj-$(CONFIG_VM86) += vm86.o @@ -40,8 +39,9 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_K8_NB) += k8.o -# Make sure this is linked after any other paravirt_ops structs: see head.S +obj-$(CONFIG_VMI) += vmi.o vmitime.o obj-$(CONFIG_PARAVIRT) += paravirt.o +obj-y += pcspeaker.o EXTRA_AFLAGS := -traditional diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 7ac7b67b851..e5eb97a910e 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -25,6 +25,7 @@ #include <linux/init.h> #include <linux/acpi.h> +#include <linux/acpi_pmtmr.h> #include <linux/efi.h> #include <linux/cpumask.h> #include <linux/module.h> @@ -615,6 +616,7 @@ static int __init acpi_parse_sbf(struct acpi_table_header *table) } #ifdef CONFIG_HPET_TIMER +#include <asm/hpet.h> static int __init acpi_parse_hpet(struct acpi_table_header *table) { @@ -645,24 +647,11 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table) hpet_res->end = (1 * 1024) - 1; } -#ifdef CONFIG_X86_64 - vxtime.hpet_address = hpet_tbl->address.address; - + hpet_address = hpet_tbl->address.address; printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", - hpet_tbl->id, vxtime.hpet_address); - - res_start = vxtime.hpet_address; -#else /* X86 */ - { - extern unsigned long hpet_address; - - hpet_address = hpet_tbl->address.address; - printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n", - hpet_tbl->id, hpet_address); + hpet_tbl->id, hpet_address); - res_start = hpet_address; - } -#endif /* X86 */ + res_start = hpet_address; if (hpet_res) { hpet_res->start = res_start; @@ -676,10 +665,6 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table) #define acpi_parse_hpet NULL #endif -#ifdef CONFIG_X86_PM_TIMER -extern u32 pmtmr_ioport; -#endif - static int __init acpi_parse_fadt(struct acpi_table_header *table) { diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index 776d9be26af..9655c233e6f 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -25,6 +25,8 @@ #include <linux/kernel_stat.h> #include <linux/sysdev.h> #include <linux/cpu.h> +#include <linux/clockchips.h> +#include <linux/acpi_pmtmr.h> #include <linux/module.h> #include <asm/atomic.h> @@ -36,6 +38,7 @@ #include <asm/hpet.h> #include <asm/i8253.h> #include <asm/nmi.h> +#include <asm/idle.h> #include <mach_apic.h> #include <mach_apicdef.h> @@ -44,128 +47,549 @@ #include "io_ports.h" /* - * cpu_mask that denotes the CPUs that needs timer interrupt coming in as - * IPIs in place of local APIC timers + * Sanity check */ -static cpumask_t timer_bcast_ipi; +#if (SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F +# error SPURIOUS_APIC_VECTOR definition error +#endif /* * Knob to control our willingness to enable the local APIC. + * + * -1=force-disable, +1=force-enable */ -static int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */ - -static inline void lapic_disable(void) -{ - enable_local_apic = -1; - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); -} +static int enable_local_apic __initdata = 0; -static inline void lapic_enable(void) -{ - enable_local_apic = 1; -} +/* Local APIC timer verification ok */ +static int local_apic_timer_verify_ok; /* - * Debug level + * Debug level, exported for io_apic.c */ int apic_verbosity; +static unsigned int calibration_result; +static int lapic_next_event(unsigned long delta, + struct clock_event_device *evt); +static void lapic_timer_setup(enum clock_event_mode mode, + struct clock_event_device *evt); +static void lapic_timer_broadcast(cpumask_t mask); static void apic_pm_activate(void); +/* + * The local apic timer can be used for any function which is CPU local. + */ +static struct clock_event_device lapic_clockevent = { + .name = "lapic", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT + | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY, + .shift = 32, + .set_mode = lapic_timer_setup, + .set_next_event = lapic_next_event, + .broadcast = lapic_timer_broadcast, + .rating = 100, + .irq = -1, +}; +static DEFINE_PER_CPU(struct clock_event_device, lapic_events); + +/* Local APIC was disabled by the BIOS and enabled by the kernel */ +static int enabled_via_apicbase; + +/* + * Get the LAPIC version + */ +static inline int lapic_get_version(void) +{ + return GET_APIC_VERSION(apic_read(APIC_LVR)); +} + +/* + * Check, if the APIC is integrated or a seperate chip + */ +static inline int lapic_is_integrated(void) +{ + return APIC_INTEGRATED(lapic_get_version()); +} + +/* + * Check, whether this is a modern or a first generation APIC + */ static int modern_apic(void) { - unsigned int lvr, version; /* AMD systems use old APIC versions, so check the CPU */ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && - boot_cpu_data.x86 >= 0xf) + boot_cpu_data.x86 >= 0xf) return 1; - lvr = apic_read(APIC_LVR); - version = GET_APIC_VERSION(lvr); - return version >= 0x14; + return lapic_get_version() >= 0x14; } +/** + * enable_NMI_through_LVT0 - enable NMI through local vector table 0 + */ +void enable_NMI_through_LVT0 (void * dummy) +{ + unsigned int v = APIC_DM_NMI; + + /* Level triggered for 82489DX */ + if (!lapic_is_integrated()) + v |= APIC_LVT_LEVEL_TRIGGER; + apic_write_around(APIC_LVT0, v); +} + +/** + * get_physical_broadcast - Get number of physical broadcast IDs + */ +int get_physical_broadcast(void) +{ + return modern_apic() ? 0xff : 0xf; +} + +/** + * lapic_get_maxlvt - get the maximum number of local vector table entries + */ +int lapic_get_maxlvt(void) +{ + unsigned int v = apic_read(APIC_LVR); + + /* 82489DXs do not report # of LVT entries. */ + return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2; +} + +/* + * Local APIC timer + */ + +/* Clock divisor is set to 16 */ +#define APIC_DIVISOR 16 + /* - * 'what should we do if we get a hw irq event on an illegal vector'. - * each architecture has to answer this themselves. + * This function sets up the local APIC timer, with a timeout of + * 'clocks' APIC bus clock. During calibration we actually call + * this function twice on the boot CPU, once with a bogus timeout + * value, second time for real. The other (noncalibrating) CPUs + * call this function only once, with the real, calibrated value. + * + * We do reads before writes even if unnecessary, to get around the + * P5 APIC double write bug. */ -void ack_bad_irq(unsigned int irq) +static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) { - printk("unexpected IRQ trap at vector %02x\n", irq); + unsigned int lvtt_value, tmp_value; + + lvtt_value = LOCAL_TIMER_VECTOR; + if (!oneshot) + lvtt_value |= APIC_LVT_TIMER_PERIODIC; + if (!lapic_is_integrated()) + lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV); + + if (!irqen) + lvtt_value |= APIC_LVT_MASKED; + + apic_write_around(APIC_LVTT, lvtt_value); + /* - * Currently unexpected vectors happen only on SMP and APIC. - * We _must_ ack these because every local APIC has only N - * irq slots per priority level, and a 'hanging, unacked' IRQ - * holds up an irq slot - in excessive cases (when multiple - * unexpected vectors occur) that might lock up the APIC - * completely. - * But only ack when the APIC is enabled -AK + * Divide PICLK by 16 */ - if (cpu_has_apic) - ack_APIC_irq(); + tmp_value = apic_read(APIC_TDCR); + apic_write_around(APIC_TDCR, (tmp_value + & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) + | APIC_TDR_DIV_16); + + if (!oneshot) + apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR); } -void __init apic_intr_init(void) +/* + * Program the next event, relative to now + */ +static int lapic_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + apic_write_around(APIC_TMICT, delta); + return 0; +} + +/* + * Setup the lapic timer in periodic or oneshot mode + */ +static void lapic_timer_setup(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + unsigned int v; + + /* Lapic used for broadcast ? */ + if (!local_apic_timer_verify_ok) + return; + + local_irq_save(flags); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + case CLOCK_EVT_MODE_ONESHOT: + __setup_APIC_LVTT(calibration_result, + mode != CLOCK_EVT_MODE_PERIODIC, 1); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + v = apic_read(APIC_LVTT); + v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write_around(APIC_LVTT, v); + break; + } + + local_irq_restore(flags); +} + +/* + * Local APIC timer broadcast function + */ +static void lapic_timer_broadcast(cpumask_t mask) { #ifdef CONFIG_SMP - smp_intr_init(); + send_IPI_mask(mask, LOCAL_TIMER_VECTOR); #endif - /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); +} - /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); +/* + * Setup the local APIC timer for this CPU. Copy the initilized values + * of the boot CPU and register the clock event in the framework. + */ +static void __devinit setup_APIC_timer(void) +{ + struct clock_event_device *levt = &__get_cpu_var(lapic_events); - /* thermal monitor LVT interrupt */ -#ifdef CONFIG_X86_MCE_P4THERMAL - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); -#endif + memcpy(levt, &lapic_clockevent, sizeof(*levt)); + levt->cpumask = cpumask_of_cpu(smp_processor_id()); + + clockevents_register_device(levt); } -/* Using APIC to generate smp_local_timer_interrupt? */ -int using_apic_timer __read_mostly = 0; +/* + * In this functions we calibrate APIC bus clocks to the external timer. + * + * We want to do the calibration only once since we want to have local timer + * irqs syncron. CPUs connected by the same APIC bus have the very same bus + * frequency. + * + * This was previously done by reading the PIT/HPET and waiting for a wrap + * around to find out, that a tick has elapsed. I have a box, where the PIT + * readout is broken, so it never gets out of the wait loop again. This was + * also reported by others. + * + * Monitoring the jiffies value is inaccurate and the clockevents + * infrastructure allows us to do a simple substitution of the interrupt + * handler. + * + * The calibration routine also uses the pm_timer when possible, as the PIT + * happens to run way too slow (factor 2.3 on my VAIO CoreDuo, which goes + * back to normal later in the boot process). + */ + +#define LAPIC_CAL_LOOPS (HZ/10) -static int enabled_via_apicbase; +static __initdata volatile int lapic_cal_loops = -1; +static __initdata long lapic_cal_t1, lapic_cal_t2; +static __initdata unsigned long long lapic_cal_tsc1, lapic_cal_tsc2; +static __initdata unsigned long lapic_cal_pm1, lapic_cal_pm2; +static __initdata unsigned long lapic_cal_j1, lapic_cal_j2; -void enable_NMI_through_LVT0 (void * dummy) +/* + * Temporary interrupt handler. + */ +static void __init lapic_cal_handler(struct clock_event_device *dev) { - unsigned int v, ver; + unsigned long long tsc = 0; + long tapic = apic_read(APIC_TMCCT); + unsigned long pm = acpi_pm_read_early(); - ver = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(ver); - v = APIC_DM_NMI; /* unmask and set to NMI */ - if (!APIC_INTEGRATED(ver)) /* 82489DX */ - v |= APIC_LVT_LEVEL_TRIGGER; - apic_write_around(APIC_LVT0, v); + if (cpu_has_tsc) + rdtscll(tsc); + + switch (lapic_cal_loops++) { + case 0: + lapic_cal_t1 = tapic; + lapic_cal_tsc1 = tsc; + lapic_cal_pm1 = pm; + lapic_cal_j1 = jiffies; + break; + + case LAPIC_CAL_LOOPS: + lapic_cal_t2 = tapic; + lapic_cal_tsc2 = tsc; + if (pm < lapic_cal_pm1) + pm += ACPI_PM_OVRRUN; + lapic_cal_pm2 = pm; + lapic_cal_j2 = jiffies; + break; + } } -int get_physical_broadcast(void) +/* + * Setup the boot APIC + * + * Calibrate and verify the result. + */ +void __init setup_boot_APIC_clock(void) { - if (modern_apic()) - return 0xff; - else - return 0xf; + struct clock_event_device *levt = &__get_cpu_var(lapic_events); + const long pm_100ms = PMTMR_TICKS_PER_SEC/10; + const long pm_thresh = pm_100ms/100; + void (*real_handler)(struct clock_event_device *dev); + unsigned long deltaj; + long delta, deltapm; + + apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n" + "calibrating APIC timer ...\n"); + + local_irq_disable(); + + /* Replace the global interrupt handler */ + real_handler = global_clock_event->event_handler; + global_clock_event->event_handler = lapic_cal_handler; + + /* + * Setup the APIC counter to 1e9. There is no way the lapic + * can underflow in the 100ms detection time frame + */ + __setup_APIC_LVTT(1000000000, 0, 0); + + /* Let the interrupts run */ + local_irq_enable(); + + while(lapic_cal_loops <= LAPIC_CAL_LOOPS); + + local_irq_disable(); + + /* Restore the real event handler */ + global_clock_event->event_handler = real_handler; + + /* Build delta t1-t2 as apic timer counts down */ + delta = lapic_cal_t1 - lapic_cal_t2; + apic_printk(APIC_VERBOSE, "... lapic delta = %ld\n", delta); + + /* Check, if the PM timer is available */ + deltapm = lapic_cal_pm2 - lapic_cal_pm1; + apic_printk(APIC_VERBOSE, "... PM timer delta = %ld\n", deltapm); + + if (deltapm) { + unsigned long mult; + u64 res; + + mult = clocksource_hz2mult(PMTMR_TICKS_PER_SEC, 22); + + if (deltapm > (pm_100ms - pm_thresh) && + deltapm < (pm_100ms + pm_thresh)) { + apic_printk(APIC_VERBOSE, "... PM timer result ok\n"); + } else { + res = (((u64) deltapm) * mult) >> 22; + do_div(res, 1000000); + printk(KERN_WARNING "APIC calibration not consistent " + "with PM Timer: %ldms instead of 100ms\n", + (long)res); + /* Correct the lapic counter value */ + res = (((u64) delta ) * pm_100ms); + do_div(res, deltapm); + printk(KERN_INFO "APIC delta adjusted to PM-Timer: " + "%lu (%ld)\n", (unsigned long) res, delta); + delta = (long) res; + } + } + + /* Calculate the scaled math multiplication factor */ + lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS, 32); + lapic_clockevent.max_delta_ns = + clockevent_delta2ns(0x7FFFFF, &lapic_clockevent); + lapic_clockevent.min_delta_ns = + clockevent_delta2ns(0xF, &lapic_clockevent); + + calibration_result = (delta * APIC_DIVISOR) / LAPIC_CAL_LOOPS; + + apic_printk(APIC_VERBOSE, "..... delta %ld\n", delta); + apic_printk(APIC_VERBOSE, "..... mult: %ld\n", lapic_clockevent.mult); + apic_printk(APIC_VERBOSE, "..... calibration result: %u\n", + calibration_result); + + if (cpu_has_tsc) { + delta = (long)(lapic_cal_tsc2 - lapic_cal_tsc1); + apic_printk(APIC_VERBOSE, "..... CPU clock speed is " + "%ld.%04ld MHz.\n", + (delta / LAPIC_CAL_LOOPS) / (1000000 / HZ), + (delta / LAPIC_CAL_LOOPS) % (1000000 / HZ)); + } + + apic_printk(APIC_VERBOSE, "..... host bus clock speed is " + "%u.%04u MHz.\n", + calibration_result / (1000000 / HZ), + calibration_result % (1000000 / HZ)); + + + apic_printk(APIC_VERBOSE, "... verify APIC timer\n"); + + /* + * Setup the apic timer manually + */ + local_apic_timer_verify_ok = 1; + levt->event_handler = lapic_cal_handler; + lapic_timer_setup(CLOCK_EVT_MODE_PERIODIC, levt); + lapic_cal_loops = -1; + + /* Let the interrupts run */ + local_irq_enable(); + + while(lapic_cal_loops <= LAPIC_CAL_LOOPS); + + local_irq_disable(); + + /* Stop the lapic timer */ + lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, levt); + + local_irq_enable(); + + /* Jiffies delta */ + deltaj = lapic_cal_j2 - lapic_cal_j1; + apic_printk(APIC_VERBOSE, "... jiffies delta = %lu\n", deltaj); + + /* Check, if the PM timer is available */ + deltapm = lapic_cal_pm2 - lapic_cal_pm1; + apic_printk(APIC_VERBOSE, "... PM timer delta = %ld\n", deltapm); + + local_apic_timer_verify_ok = 0; + + if (deltapm) { + if (deltapm > (pm_100ms - pm_thresh) && + deltapm < (pm_100ms + pm_thresh)) { + apic_printk(APIC_VERBOSE, "... PM timer result ok\n"); + /* Check, if the jiffies result is consistent */ + if (deltaj < LAPIC_CAL_LOOPS-2 || + deltaj > LAPIC_CAL_LOOPS+2) { + /* + * Not sure, what we can do about this one. + * When high resultion timers are active + * and the lapic timer does not stop in C3 + * we are fine. Otherwise more trouble might + * be waiting. -- tglx + */ + printk(KERN_WARNING "Global event device %s " + "has wrong frequency " + "(%lu ticks instead of %d)\n", + global_clock_event->name, deltaj, + LAPIC_CAL_LOOPS); + } + local_apic_timer_verify_ok = 1; + } + } else { + /* Check, if the jiffies result is consistent */ + if (deltaj >= LAPIC_CAL_LOOPS-2 && + deltaj <= LAPIC_CAL_LOOPS+2) { + apic_printk(APIC_VERBOSE, "... jiffies result ok\n"); + local_apic_timer_verify_ok = 1; + } + } + + if (!local_apic_timer_verify_ok) { + printk(KERN_WARNING + "APIC timer disabled due to verification failure.\n"); + /* No broadcast on UP ! */ + if (num_possible_cpus() == 1) + return; + } else + lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; + + /* Setup the lapic or request the broadcast */ + setup_APIC_timer(); +} + +void __devinit setup_secondary_APIC_clock(void) +{ + setup_APIC_timer(); } -int get_maxlvt(void) +/* + * The guts of the apic timer interrupt + */ +static void local_apic_timer_interrupt(void) { - unsigned int v, ver, maxlvt; + int cpu = smp_processor_id(); + struct clock_event_device *evt = &per_cpu(lapic_events, cpu); - v = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(v); - /* 82489DXs do not report # of LVT entries. */ - maxlvt = APIC_INTEGRATED(ver) ? GET_APIC_MAXLVT(v) : 2; - return maxlvt; + /* + * Normally we should not be here till LAPIC has been initialized but + * in some cases like kdump, its possible that there is a pending LAPIC + * timer interrupt from previous kernel's context and is delivered in + * new kernel the moment interrupts are enabled. + * + * Interrupts are enabled early and LAPIC is setup much later, hence + * its possible that when we get here evt->event_handler is NULL. + * Check for event_handler being NULL and discard the interrupt as + * spurious. + */ + if (!evt->event_handler) { + printk(KERN_WARNING + "Spurious LAPIC timer interrupt on cpu %d\n", cpu); + /* Switch it off */ + lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt); + return; + } + + per_cpu(irq_stat, cpu).apic_timer_irqs++; + + evt->event_handler(evt); } +/* + * Local APIC timer interrupt. This is the most natural way for doing + * local interrupts, but local timer interrupts can be emulated by + * broadcast interrupts too. [in case the hw doesn't support APIC timers] + * + * [ if a single-CPU system runs an SMP kernel then we call the local + * interrupt as well. Thus we cannot inline the local irq ... ] + */ + +void fastcall smp_apic_timer_interrupt(struct pt_regs *regs) +{ + struct pt_regs *old_regs = set_irq_regs(regs); + + /* + * NOTE! We'd better ACK the irq immediately, + * because timer handling can be slow. + */ + ack_APIC_irq(); + /* + * update_process_times() expects us to have done irq_enter(). + * Besides, if we don't timer interrupts ignore the global + * interrupt lock, which is the WrongThing (tm) to do. + */ + exit_idle(); + irq_enter(); + local_apic_timer_interrupt(); + irq_exit(); + + set_irq_regs(old_regs); +} + +int setup_profiling_timer(unsigned int multiplier) +{ + return -EINVAL; +} + +/* + * Local APIC start and shutdown + */ + +/** + * clear_local_APIC - shutdown the local APIC + * + * This is called, when a CPU is disabled and before rebooting, so the state of + * the local APIC has no dangling leftovers. Also used to cleanout any BIOS + * leftovers during boot. + */ void clear_local_APIC(void) { - int maxlvt; + int maxlvt = lapic_get_maxlvt(); unsigned long v; - maxlvt = get_maxlvt(); - /* * Masking an LVT entry can trigger a local APIC error * if the vector is zero. Mask LVTERR first to prevent this. @@ -189,7 +613,7 @@ void clear_local_APIC(void) apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED); } -/* lets not touch this if we didn't frob it */ + /* lets not touch this if we didn't frob it */ #ifdef CONFIG_X86_MCE_P4THERMAL if (maxlvt >= 5) { v = apic_read(APIC_LVTTHMR); @@ -211,85 +635,18 @@ void clear_local_APIC(void) if (maxlvt >= 5) apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED); #endif - v = GET_APIC_VERSION(apic_read(APIC_LVR)); - if (APIC_INTEGRATED(v)) { /* !82489DX */ - if (maxlvt > 3) /* Due to Pentium errata 3AP and 11AP. */ + /* Integrated APIC (!82489DX) ? */ + if (lapic_is_integrated()) { + if (maxlvt > 3) + /* Clear ESR due to Pentium errata 3AP and 11AP */ apic_write(APIC_ESR, 0); apic_read(APIC_ESR); } } -void __init connect_bsp_APIC(void) -{ - if (pic_mode) { - /* - * Do not trust the local APIC being empty at bootup. - */ - clear_local_APIC(); - /* - * PIC mode, enable APIC mode in the IMCR, i.e. - * connect BSP's local APIC to INT and NMI lines. - */ - apic_printk(APIC_VERBOSE, "leaving PIC mode, " - "enabling APIC mode.\n"); - outb(0x70, 0x22); - outb(0x01, 0x23); - } - enable_apic_mode(); -} - -void disconnect_bsp_APIC(int virt_wire_setup) -{ - if (pic_mode) { - /* - * Put the board back into PIC mode (has an effect - * only on certain older boards). Note that APIC - * interrupts, including IPIs, won't work beyond - * this point! The only exception are INIT IPIs. - */ - apic_printk(APIC_VERBOSE, "disabling APIC mode, " - "entering PIC mode.\n"); - outb(0x70, 0x22); - outb(0x00, 0x23); - } - else { - /* Go back to Virtual Wire compatibility mode */ - unsigned long value; - - /* For the spurious interrupt use vector F, and enable it */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - value |= 0xf; - apic_write_around(APIC_SPIV, value); - - if (!virt_wire_setup) { - /* For LVT0 make it edge triggered, active high, external and enabled */ - value = apic_read(APIC_LVT0); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); - apic_write_around(APIC_LVT0, value); - } - else { - /* Disable LVT0 */ - apic_write_around(APIC_LVT0, APIC_LVT_MASKED); - } - - /* For LVT1 make it edge triggered, active high, nmi and enabled */ - value = apic_read(APIC_LVT1); - value &= ~( - APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); - apic_write_around(APIC_LVT1, value); - } -} - +/** + * disable_local_APIC - clear and disable the local APIC + */ void disable_local_APIC(void) { unsigned long value; @@ -304,8 +661,13 @@ void disable_local_APIC(void) value &= ~APIC_SPIV_APIC_ENABLED; apic_write_around(APIC_SPIV, value); + /* + * When LAPIC was disabled by the BIOS and enabled by the kernel, + * restore the disabled state. + */ if (enabled_via_apicbase) { unsigned int l, h; + rdmsr(MSR_IA32_APICBASE, l, h); l &= ~MSR_IA32_APICBASE_ENABLE; wrmsr(MSR_IA32_APICBASE, l, h); @@ -313,6 +675,28 @@ void disable_local_APIC(void) } /* + * If Linux enabled the LAPIC against the BIOS default disable it down before + * re-entering the BIOS on shutdown. Otherwise the BIOS may get confused and + * not power-off. Additionally clear all LVT entries before disable_local_APIC + * for the case where Linux didn't enable the LAPIC. + */ +void lapic_shutdown(void) +{ + unsigned long flags; + + if (!cpu_has_apic) + return; + + local_irq_save(flags); + clear_local_APIC(); + + if (enabled_via_apicbase) + disable_local_APIC(); + + local_irq_restore(flags); +} + +/* * This is to verify that we're looking at a real local APIC. * Check these against your board if the CPUs aren't getting * started for no apparent reason. @@ -344,7 +728,7 @@ int __init verify_local_APIC(void) reg1 = GET_APIC_VERSION(reg0); if (reg1 == 0x00 || reg1 == 0xff) return 0; - reg1 = get_maxlvt(); + reg1 = lapic_get_maxlvt(); if (reg1 < 0x02 || reg1 == 0xff) return 0; @@ -367,10 +751,15 @@ int __init verify_local_APIC(void) return 1; } +/** + * sync_Arb_IDs - synchronize APIC bus arbitration IDs + */ void __init sync_Arb_IDs(void) { - /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 - And not needed on AMD */ + /* + * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not + * needed on AMD. + */ if (modern_apic()) return; /* @@ -383,14 +772,12 @@ void __init sync_Arb_IDs(void) | APIC_DM_INIT); } -extern void __error_in_apic_c (void); - /* * An initial setup of the virtual wire mode. */ void __init init_bsp_APIC(void) { - unsigned long value, ver; + unsigned long value; /* * Don't do the setup now if we have a SMP BIOS as the @@ -399,9 +786,6 @@ void __init init_bsp_APIC(void) if (smp_found_config || !cpu_has_apic) return; - value = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(value); - /* * Do not trust the local APIC being empty at bootup. */ @@ -413,9 +797,10 @@ void __init init_bsp_APIC(void) value = apic_read(APIC_SPIV); value &= ~APIC_VECTOR_MASK; value |= APIC_SPIV_APIC_ENABLED; - + /* This bit is reserved on P4/Xeon and should be cleared */ - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 15)) + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + (boot_cpu_data.x86 == 15)) value &= ~APIC_SPIV_FOCUS_DISABLED; else value |= APIC_SPIV_FOCUS_DISABLED; @@ -427,14 +812,17 @@ void __init init_bsp_APIC(void) */ apic_write_around(APIC_LVT0, APIC_DM_EXTINT); value = APIC_DM_NMI; - if (!APIC_INTEGRATED(ver)) /* 82489DX */ + if (!lapic_is_integrated()) /* 82489DX */ value |= APIC_LVT_LEVEL_TRIGGER; apic_write_around(APIC_LVT1, value); } +/** + * setup_local_APIC - setup the local APIC + */ void __devinit setup_local_APIC(void) { - unsigned long oldvalue, value, ver, maxlvt; + unsigned long oldvalue, value, maxlvt, integrated; int i, j; /* Pound the ESR really hard over the head with a big hammer - mbligh */ @@ -445,11 +833,7 @@ void __devinit setup_local_APIC(void) apic_write(APIC_ESR, 0); } - value = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(value); - - if ((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f) - __error_in_apic_c(); + integrated = lapic_is_integrated(); /* * Double-check whether this APIC is really registered. @@ -520,13 +904,10 @@ void __devinit setup_local_APIC(void) * like LRU than MRU (the short-term load is more even across CPUs). * See also the comment in end_level_ioapic_irq(). --macro */ -#if 1 + /* Enable focus processor (bit==0) */ value &= ~APIC_SPIV_FOCUS_DISABLED; -#else - /* Disable focus processor (bit==1) */ - value |= APIC_SPIV_FOCUS_DISABLED; -#endif + /* * Set spurious IRQ vector */ @@ -562,17 +943,18 @@ void __devinit setup_local_APIC(void) value = APIC_DM_NMI; else value = APIC_DM_NMI | APIC_LVT_MASKED; - if (!APIC_INTEGRATED(ver)) /* 82489DX */ + if (!integrated) /* 82489DX */ value |= APIC_LVT_LEVEL_TRIGGER; apic_write_around(APIC_LVT1, value); - if (APIC_INTEGRATED(ver) && !esr_disable) { /* !82489DX */ - maxlvt = get_maxlvt(); + if (integrated && !esr_disable) { /* !82489DX */ + maxlvt = lapic_get_maxlvt(); if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ apic_write(APIC_ESR, 0); oldvalue = apic_read(APIC_ESR); - value = ERROR_APIC_VECTOR; // enables sending errors + /* enables sending errors */ + value = ERROR_APIC_VECTOR; apic_write_around(APIC_LVTERR, value); /* * spec says clear errors after enabling vector. @@ -585,207 +967,30 @@ void __devinit setup_local_APIC(void) "vector: 0x%08lx after: 0x%08lx\n", oldvalue, value); } else { - if (esr_disable) - /* - * Something untraceble is creating bad interrupts on + if (esr_disable) + /* + * Something untraceble is creating bad interrupts on * secondary quads ... for the moment, just leave the * ESR disabled - we can't do anything useful with the * errors anyway - mbligh */ - printk("Leaving ESR disabled.\n"); - else - printk("No ESR for 82489DX.\n"); + printk(KERN_INFO "Leaving ESR disabled.\n"); + else + printk(KERN_INFO "No ESR for 82489DX.\n"); } + /* Disable the local apic timer */ + value = apic_read(APIC_LVTT); + value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write_around(APIC_LVTT, value); + setup_apic_nmi_watchdog(NULL); apic_pm_activate(); } /* - * If Linux enabled the LAPIC against the BIOS default - * disable it down before re-entering the BIOS on shutdown. - * Otherwise the BIOS may get confused and not power-off. - * Additionally clear all LVT entries before disable_local_APIC - * for the case where Linux didn't enable the LAPIC. + * Detect and initialize APIC */ -void lapic_shutdown(void) -{ - unsigned long flags; - - if (!cpu_has_apic) - return; - - local_irq_save(flags); - clear_local_APIC(); - - if (enabled_via_apicbase) - disable_local_APIC(); - - local_irq_restore(flags); -} - -#ifdef CONFIG_PM - -static struct { - int active; - /* r/w apic fields */ - unsigned int apic_id; - unsigned int apic_taskpri; - unsigned int apic_ldr; - unsigned int apic_dfr; - unsigned int apic_spiv; - unsigned int apic_lvtt; - unsigned int apic_lvtpc; - unsigned int apic_lvt0; - unsigned int apic_lvt1; - unsigned int apic_lvterr; - unsigned int apic_tmict; - unsigned int apic_tdcr; - unsigned int apic_thmr; -} apic_pm_state; - -static int lapic_suspend(struct sys_device *dev, pm_message_t state) -{ - unsigned long flags; - int maxlvt; - - if (!apic_pm_state.active) - return 0; - - maxlvt = get_maxlvt(); - - apic_pm_state.apic_id = apic_read(APIC_ID); - apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); - apic_pm_state.apic_ldr = apic_read(APIC_LDR); - apic_pm_state.apic_dfr = apic_read(APIC_DFR); - apic_pm_state.apic_spiv = apic_read(APIC_SPIV); - apic_pm_state.apic_lvtt = apic_read(APIC_LVTT); - if (maxlvt >= 4) - apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC); - apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0); - apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1); - apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); - apic_pm_state.apic_tmict = apic_read(APIC_TMICT); - apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) - apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); -#endif - - local_irq_save(flags); - disable_local_APIC(); - local_irq_restore(flags); - return 0; -} - -static int lapic_resume(struct sys_device *dev) -{ - unsigned int l, h; - unsigned long flags; - int maxlvt; - - if (!apic_pm_state.active) - return 0; - - maxlvt = get_maxlvt(); - - local_irq_save(flags); - - /* - * Make sure the APICBASE points to the right address - * - * FIXME! This will be wrong if we ever support suspend on - * SMP! We'll need to do this as part of the CPU restore! - */ - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); - - apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); - apic_write(APIC_ID, apic_pm_state.apic_id); - apic_write(APIC_DFR, apic_pm_state.apic_dfr); - apic_write(APIC_LDR, apic_pm_state.apic_ldr); - apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri); - apic_write(APIC_SPIV, apic_pm_state.apic_spiv); - apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); - apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) - apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); -#endif - if (maxlvt >= 4) - apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc); - apic_write(APIC_LVTT, apic_pm_state.apic_lvtt); - apic_write(APIC_TDCR, apic_pm_state.apic_tdcr); - apic_write(APIC_TMICT, apic_pm_state.apic_tmict); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); - local_irq_restore(flags); - return 0; -} - -/* - * This device has no shutdown method - fully functioning local APICs - * are needed on every CPU up until machine_halt/restart/poweroff. - */ - -static struct sysdev_class lapic_sysclass = { - set_kset_name("lapic"), - .resume = lapic_resume, - .suspend = lapic_suspend, -}; - -static struct sys_device device_lapic = { - .id = 0, - .cls = &lapic_sysclass, -}; - -static void __devinit apic_pm_activate(void) -{ - apic_pm_state.active = 1; -} - -static int __init init_lapic_sysfs(void) -{ - int error; - - if (!cpu_has_apic) - return 0; - /* XXX: remove suspend/resume procs if !apic_pm_state.active? */ - - error = sysdev_class_register(&lapic_sysclass); - if (!error) - error = sysdev_register(&device_lapic); - return error; -} -device_initcall(init_lapic_sysfs); - -#else /* CONFIG_PM */ - -static void apic_pm_activate(void) { } - -#endif /* CONFIG_PM */ - -/* - * Detect and enable local APICs on non-SMP boards. - * Original code written by Keir Fraser. - */ - -static int __init apic_set_verbosity(char *str) -{ - if (strcmp("debug", str) == 0) - apic_verbosity = APIC_DEBUG; - else if (strcmp("verbose", str) == 0) - apic_verbosity = APIC_VERBOSE; - return 1; -} - -__setup("apic=", apic_set_verbosity); - static int __init detect_init_APIC (void) { u32 h, l, features; @@ -797,7 +1002,7 @@ static int __init detect_init_APIC (void) switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) || - (boot_cpu_data.x86 == 15)) + (boot_cpu_data.x86 == 15)) break; goto no_apic; case X86_VENDOR_INTEL: @@ -811,23 +1016,23 @@ static int __init detect_init_APIC (void) if (!cpu_has_apic) { /* - * Over-ride BIOS and try to enable the local - * APIC only if "lapic" specified. + * Over-ride BIOS and try to enable the local APIC only if + * "lapic" specified. */ if (enable_local_apic <= 0) { - printk("Local APIC disabled by BIOS -- " + printk(KERN_INFO "Local APIC disabled by BIOS -- " "you can enable it with \"lapic\"\n"); return -1; } /* - * Some BIOSes disable the local APIC in the - * APIC_BASE MSR. This can only be done in - * software for Intel P6 or later and AMD K7 - * (Model > 1) or later. + * Some BIOSes disable the local APIC in the APIC_BASE + * MSR. This can only be done in software for Intel P6 or later + * and AMD K7 (Model > 1) or later. */ rdmsr(MSR_IA32_APICBASE, l, h); if (!(l & MSR_IA32_APICBASE_ENABLE)) { - printk("Local APIC disabled by BIOS -- reenabling.\n"); + printk(KERN_INFO + "Local APIC disabled by BIOS -- reenabling.\n"); l &= ~MSR_IA32_APICBASE_BASE; l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; wrmsr(MSR_IA32_APICBASE, l, h); @@ -840,7 +1045,7 @@ static int __init detect_init_APIC (void) */ features = cpuid_edx(1); if (!(features & (1 << X86_FEATURE_APIC))) { - printk("Could not enable APIC!\n"); + printk(KERN_WARNING "Could not enable APIC!\n"); return -1; } set_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); @@ -854,17 +1059,20 @@ static int __init detect_init_APIC (void) if (nmi_watchdog != NMI_NONE) nmi_watchdog = NMI_LOCAL_APIC; - printk("Found and enabled local APIC!\n"); + printk(KERN_INFO "Found and enabled local APIC!\n"); apic_pm_activate(); return 0; no_apic: - printk("No local APIC present or hardware disabled\n"); + printk(KERN_INFO "No local APIC present or hardware disabled\n"); return -1; } +/** + * init_apic_mappings - initialize APIC mappings + */ void __init init_apic_mappings(void) { unsigned long apic_phys; @@ -924,387 +1132,96 @@ fake_ioapic_page: } /* - * This part sets up the APIC 32 bit clock in LVTT1, with HZ interrupts - * per second. We assume that the caller has already set up the local - * APIC. - * - * The APIC timer is not exactly sync with the external timer chip, it - * closely follows bus clocks. - */ - -/* - * The timer chip is already set up at HZ interrupts per second here, - * but we do not accept timer interrupts yet. We only allow the BP - * to calibrate. - */ -static unsigned int __devinit get_8254_timer_count(void) -{ - unsigned long flags; - - unsigned int count; - - spin_lock_irqsave(&i8253_lock, flags); - - outb_p(0x00, PIT_MODE); - count = inb_p(PIT_CH0); - count |= inb_p(PIT_CH0) << 8; - - spin_unlock_irqrestore(&i8253_lock, flags); - - return count; -} - -/* next tick in 8254 can be caught by catching timer wraparound */ -static void __devinit wait_8254_wraparound(void) -{ - unsigned int curr_count, prev_count; - - curr_count = get_8254_timer_count(); - do { - prev_count = curr_count; - curr_count = get_8254_timer_count(); - - /* workaround for broken Mercury/Neptune */ - if (prev_count >= curr_count + 0x100) - curr_count = get_8254_timer_count(); - - } while (prev_count >= curr_count); -} - -/* - * Default initialization for 8254 timers. If we use other timers like HPET, - * we override this later - */ -void (*wait_timer_tick)(void) __devinitdata = wait_8254_wraparound; - -/* - * This function sets up the local APIC timer, with a timeout of - * 'clocks' APIC bus clock. During calibration we actually call - * this function twice on the boot CPU, once with a bogus timeout - * value, second time for real. The other (noncalibrating) CPUs - * call this function only once, with the real, calibrated value. - * - * We do reads before writes even if unnecessary, to get around the - * P5 APIC double write bug. + * This initializes the IO-APIC and APIC hardware if this is + * a UP kernel. */ - -#define APIC_DIVISOR 16 - -static void __setup_APIC_LVTT(unsigned int clocks) +int __init APIC_init_uniprocessor (void) { - unsigned int lvtt_value, tmp_value, ver; - int cpu = smp_processor_id(); - - ver = GET_APIC_VERSION(apic_read(APIC_LVR)); - lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR; - if (!APIC_INTEGRATED(ver)) - lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV); - - if (cpu_isset(cpu, timer_bcast_ipi)) - lvtt_value |= APIC_LVT_MASKED; + if (enable_local_apic < 0) + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); - apic_write_around(APIC_LVTT, lvtt_value); + if (!smp_found_config && !cpu_has_apic) + return -1; /* - * Divide PICLK by 16 + * Complain if the BIOS pretends there is one. */ - tmp_value = apic_read(APIC_TDCR); - apic_write_around(APIC_TDCR, (tmp_value - & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) - | APIC_TDR_DIV_16); - - apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR); -} + if (!cpu_has_apic && + APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) { + printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", + boot_cpu_physical_apicid); + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); + return -1; + } -static void __devinit setup_APIC_timer(unsigned int clocks) -{ - unsigned long flags; + verify_local_APIC(); - local_irq_save(flags); + connect_bsp_APIC(); /* - * Wait for IRQ0's slice: + * Hack: In case of kdump, after a crash, kernel might be booting + * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid + * might be zero if read from MP tables. Get it from LAPIC. */ - wait_timer_tick(); +#ifdef CONFIG_CRASH_DUMP + boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); +#endif + phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); - __setup_APIC_LVTT(clocks); + setup_local_APIC(); - local_irq_restore(flags); +#ifdef CONFIG_X86_IO_APIC + if (smp_found_config) + if (!skip_ioapic_setup && nr_ioapics) + setup_IO_APIC(); +#endif + setup_boot_clock(); + + return 0; } /* - * In this function we calibrate APIC bus clocks to the external - * timer. Unfortunately we cannot use jiffies and the timer irq - * to calibrate, since some later bootup code depends on getting - * the first irq? Ugh. - * - * We want to do the calibration only once since we - * want to have local timer irqs syncron. CPUs connected - * by the same APIC bus have the very same bus frequency. - * And we want to have irqs off anyways, no accidental - * APIC irq that way. + * APIC command line parameters */ - -static int __init calibrate_APIC_clock(void) -{ - unsigned long long t1 = 0, t2 = 0; - long tt1, tt2; - long result; - int i; - const int LOOPS = HZ/10; - - apic_printk(APIC_VERBOSE, "calibrating APIC timer ...\n"); - - /* - * Put whatever arbitrary (but long enough) timeout - * value into the APIC clock, we just want to get the - * counter running for calibration. - */ - __setup_APIC_LVTT(1000000000); - - /* - * The timer chip counts down to zero. Let's wait - * for a wraparound to start exact measurement: - * (the current tick might have been already half done) - */ - - wait_timer_tick(); - - /* - * We wrapped around just now. Let's start: - */ - if (cpu_has_tsc) - rdtscll(t1); - tt1 = apic_read(APIC_TMCCT); - - /* - * Let's wait LOOPS wraprounds: - */ - for (i = 0; i < LOOPS; i++) - wait_timer_tick(); - - tt2 = apic_read(APIC_TMCCT); - if (cpu_has_tsc) - rdtscll(t2); - - /* - * The APIC bus clock counter is 32 bits only, it - * might have overflown, but note that we use signed - * longs, thus no extra care needed. - * - * underflown to be exact, as the timer counts down ;) - */ - - result = (tt1-tt2)*APIC_DIVISOR/LOOPS; - - if (cpu_has_tsc) - apic_printk(APIC_VERBOSE, "..... CPU clock speed is " - "%ld.%04ld MHz.\n", - ((long)(t2-t1)/LOOPS)/(1000000/HZ), - ((long)(t2-t1)/LOOPS)%(1000000/HZ)); - - apic_printk(APIC_VERBOSE, "..... host bus clock speed is " - "%ld.%04ld MHz.\n", - result/(1000000/HZ), - result%(1000000/HZ)); - - return result; -} - -static unsigned int calibration_result; - -void __init setup_boot_APIC_clock(void) -{ - unsigned long flags; - apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"); - using_apic_timer = 1; - - local_irq_save(flags); - - calibration_result = calibrate_APIC_clock(); - /* - * Now set up the timer for real. - */ - setup_APIC_timer(calibration_result); - - local_irq_restore(flags); -} - -void __devinit setup_secondary_APIC_clock(void) -{ - setup_APIC_timer(calibration_result); -} - -void disable_APIC_timer(void) -{ - if (using_apic_timer) { - unsigned long v; - - v = apic_read(APIC_LVTT); - /* - * When an illegal vector value (0-15) is written to an LVT - * entry and delivery mode is Fixed, the APIC may signal an - * illegal vector error, with out regard to whether the mask - * bit is set or whether an interrupt is actually seen on input. - * - * Boot sequence might call this function when the LVTT has - * '0' vector value. So make sure vector field is set to - * valid value. - */ - v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write_around(APIC_LVTT, v); - } -} - -void enable_APIC_timer(void) +static int __init parse_lapic(char *arg) { - int cpu = smp_processor_id(); - - if (using_apic_timer && - !cpu_isset(cpu, timer_bcast_ipi)) { - unsigned long v; - - v = apic_read(APIC_LVTT); - apic_write_around(APIC_LVTT, v & ~APIC_LVT_MASKED); - } + enable_local_apic = 1; + return 0; } +early_param("lapic", parse_lapic); -void switch_APIC_timer_to_ipi(void *cpumask) +static int __init parse_nolapic(char *arg) { - cpumask_t mask = *(cpumask_t *)cpumask; - int cpu = smp_processor_id(); - - if (cpu_isset(cpu, mask) && - !cpu_isset(cpu, timer_bcast_ipi)) { - disable_APIC_timer(); - cpu_set(cpu, timer_bcast_ipi); - } + enable_local_apic = -1; + clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); + return 0; } -EXPORT_SYMBOL(switch_APIC_timer_to_ipi); +early_param("nolapic", parse_nolapic); -void switch_ipi_to_APIC_timer(void *cpumask) +static int __init apic_set_verbosity(char *str) { - cpumask_t mask = *(cpumask_t *)cpumask; - int cpu = smp_processor_id(); - - if (cpu_isset(cpu, mask) && - cpu_isset(cpu, timer_bcast_ipi)) { - cpu_clear(cpu, timer_bcast_ipi); - enable_APIC_timer(); - } + if (strcmp("debug", str) == 0) + apic_verbosity = APIC_DEBUG; + else if (strcmp("verbose", str) == 0) + apic_verbosity = APIC_VERBOSE; + return 1; } -EXPORT_SYMBOL(switch_ipi_to_APIC_timer); - -#undef APIC_DIVISOR -/* - * Local timer interrupt handler. It does both profiling and - * process statistics/rescheduling. - * - * We do profiling in every local tick, statistics/rescheduling - * happen only every 'profiling multiplier' ticks. The default - * multiplier is 1 and it can be changed by writing the new multiplier - * value into /proc/profile. - */ - -inline void smp_local_timer_interrupt(void) -{ - profile_tick(CPU_PROFILING); -#ifdef CONFIG_SMP - update_process_times(user_mode_vm(get_irq_regs())); -#endif +__setup("apic=", apic_set_verbosity); - /* - * We take the 'long' return path, and there every subsystem - * grabs the apropriate locks (kernel lock/ irq lock). - * - * we might want to decouple profiling from the 'long path', - * and do the profiling totally in assembly. - * - * Currently this isn't too much of an issue (performance wise), - * we can take more than 100K local irqs per second on a 100 MHz P5. - */ -} /* - * Local APIC timer interrupt. This is the most natural way for doing - * local interrupts, but local timer interrupts can be emulated by - * broadcast interrupts too. [in case the hw doesn't support APIC timers] - * - * [ if a single-CPU system runs an SMP kernel then we call the local - * interrupt as well. Thus we cannot inline the local irq ... ] + * Local APIC interrupts */ -fastcall void smp_apic_timer_interrupt(struct pt_regs *regs) -{ - struct pt_regs *old_regs = set_irq_regs(regs); - int cpu = smp_processor_id(); - - /* - * the NMI deadlock-detector uses this. - */ - per_cpu(irq_stat, cpu).apic_timer_irqs++; - - /* - * NOTE! We'd better ACK the irq immediately, - * because timer handling can be slow. - */ - ack_APIC_irq(); - /* - * update_process_times() expects us to have done irq_enter(). - * Besides, if we don't timer interrupts ignore the global - * interrupt lock, which is the WrongThing (tm) to do. - */ - irq_enter(); - smp_local_timer_interrupt(); - irq_exit(); - set_irq_regs(old_regs); -} - -#ifndef CONFIG_SMP -static void up_apic_timer_interrupt_call(void) -{ - int cpu = smp_processor_id(); - - /* - * the NMI deadlock-detector uses this. - */ - per_cpu(irq_stat, cpu).apic_timer_irqs++; - - smp_local_timer_interrupt(); -} -#endif - -void smp_send_timer_broadcast_ipi(void) -{ - cpumask_t mask; - - cpus_and(mask, cpu_online_map, timer_bcast_ipi); - if (!cpus_empty(mask)) { -#ifdef CONFIG_SMP - send_IPI_mask(mask, LOCAL_TIMER_VECTOR); -#else - /* - * We can directly call the apic timer interrupt handler - * in UP case. Minus all irq related functions - */ - up_apic_timer_interrupt_call(); -#endif - } -} - -int setup_profiling_timer(unsigned int multiplier) -{ - return -EINVAL; -} - /* * This interrupt should _never_ happen with our APIC/SMP architecture */ -fastcall void smp_spurious_interrupt(struct pt_regs *regs) +void smp_spurious_interrupt(struct pt_regs *regs) { unsigned long v; + exit_idle(); irq_enter(); /* * Check if this really is a spurious interrupt and ACK it @@ -1316,19 +1233,19 @@ fastcall void smp_spurious_interrupt(struct pt_regs *regs) ack_APIC_irq(); /* see sw-dev-man vol 3, chapter 7.4.13.5 */ - printk(KERN_INFO "spurious APIC interrupt on CPU#%d, should never happen.\n", - smp_processor_id()); + printk(KERN_INFO "spurious APIC interrupt on CPU#%d, " + "should never happen.\n", smp_processor_id()); irq_exit(); } /* * This interrupt should never happen with our APIC/SMP architecture */ - -fastcall void smp_error_interrupt(struct pt_regs *regs) +void smp_error_interrupt(struct pt_regs *regs) { unsigned long v, v1; + exit_idle(); irq_enter(); /* First tickle the hardware, only then report what went on. -- REW */ v = apic_read(APIC_ESR); @@ -1348,69 +1265,261 @@ fastcall void smp_error_interrupt(struct pt_regs *regs) 7: Illegal register address */ printk (KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n", - smp_processor_id(), v , v1); + smp_processor_id(), v , v1); irq_exit(); } /* - * This initializes the IO-APIC and APIC hardware if this is - * a UP kernel. + * Initialize APIC interrupts */ -int __init APIC_init_uniprocessor (void) +void __init apic_intr_init(void) { - if (enable_local_apic < 0) - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); +#ifdef CONFIG_SMP + smp_intr_init(); +#endif + /* self generated IPI for local APIC timer */ + set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - if (!smp_found_config && !cpu_has_apic) - return -1; + /* IPI vectors for APIC spurious and error interrupts */ + set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - /* - * Complain if the BIOS pretends there is one. - */ - if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) { - printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n", - boot_cpu_physical_apicid); - clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability); - return -1; + /* thermal monitor LVT interrupt */ +#ifdef CONFIG_X86_MCE_P4THERMAL + set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); +#endif +} + +/** + * connect_bsp_APIC - attach the APIC to the interrupt system + */ +void __init connect_bsp_APIC(void) +{ + if (pic_mode) { + /* + * Do not trust the local APIC being empty at bootup. + */ + clear_local_APIC(); + /* + * PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's + * local APIC to INT and NMI lines. + */ + apic_printk(APIC_VERBOSE, "leaving PIC mode, " + "enabling APIC mode.\n"); + outb(0x70, 0x22); + outb(0x01, 0x23); } + enable_apic_mode(); +} - verify_local_APIC(); +/** + * disconnect_bsp_APIC - detach the APIC from the interrupt system + * @virt_wire_setup: indicates, whether virtual wire mode is selected + * + * Virtual wire mode is necessary to deliver legacy interrupts even when the + * APIC is disabled. + */ +void disconnect_bsp_APIC(int virt_wire_setup) +{ + if (pic_mode) { + /* + * Put the board back into PIC mode (has an effect only on + * certain older boards). Note that APIC interrupts, including + * IPIs, won't work beyond this point! The only exception are + * INIT IPIs. + */ + apic_printk(APIC_VERBOSE, "disabling APIC mode, " + "entering PIC mode.\n"); + outb(0x70, 0x22); + outb(0x00, 0x23); + } else { + /* Go back to Virtual Wire compatibility mode */ + unsigned long value; - connect_bsp_APIC(); + /* For the spurious interrupt use vector F, and enable it */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= 0xf; + apic_write_around(APIC_SPIV, value); - /* - * Hack: In case of kdump, after a crash, kernel might be booting - * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid - * might be zero if read from MP tables. Get it from LAPIC. - */ -#ifdef CONFIG_CRASH_DUMP - boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID)); -#endif - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); + if (!virt_wire_setup) { + /* + * For LVT0 make it edge triggered, active high, + * external and enabled + */ + value = apic_read(APIC_LVT0); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED ); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); + apic_write_around(APIC_LVT0, value); + } else { + /* Disable LVT0 */ + apic_write_around(APIC_LVT0, APIC_LVT_MASKED); + } - setup_local_APIC(); + /* + * For LVT1 make it edge triggered, active high, nmi and + * enabled + */ + value = apic_read(APIC_LVT1); + value &= ~( + APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); + apic_write_around(APIC_LVT1, value); + } +} -#ifdef CONFIG_X86_IO_APIC - if (smp_found_config) - if (!skip_ioapic_setup && nr_ioapics) - setup_IO_APIC(); +/* + * Power management + */ +#ifdef CONFIG_PM + +static struct { + int active; + /* r/w apic fields */ + unsigned int apic_id; + unsigned int apic_taskpri; + unsigned int apic_ldr; + unsigned int apic_dfr; + unsigned int apic_spiv; + unsigned int apic_lvtt; + unsigned int apic_lvtpc; + unsigned int apic_lvt0; + unsigned int apic_lvt1; + unsigned int apic_lvterr; + unsigned int apic_tmict; + unsigned int apic_tdcr; + unsigned int apic_thmr; +} apic_pm_state; + +static int lapic_suspend(struct sys_device *dev, pm_message_t state) +{ + unsigned long flags; + int maxlvt; + + if (!apic_pm_state.active) + return 0; + + maxlvt = lapic_get_maxlvt(); + + apic_pm_state.apic_id = apic_read(APIC_ID); + apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); + apic_pm_state.apic_ldr = apic_read(APIC_LDR); + apic_pm_state.apic_dfr = apic_read(APIC_DFR); + apic_pm_state.apic_spiv = apic_read(APIC_SPIV); + apic_pm_state.apic_lvtt = apic_read(APIC_LVTT); + if (maxlvt >= 4) + apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC); + apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0); + apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1); + apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); + apic_pm_state.apic_tmict = apic_read(APIC_TMICT); + apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); +#ifdef CONFIG_X86_MCE_P4THERMAL + if (maxlvt >= 5) + apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); #endif - setup_boot_APIC_clock(); + local_irq_save(flags); + disable_local_APIC(); + local_irq_restore(flags); return 0; } -static int __init parse_lapic(char *arg) +static int lapic_resume(struct sys_device *dev) { - lapic_enable(); + unsigned int l, h; + unsigned long flags; + int maxlvt; + + if (!apic_pm_state.active) + return 0; + + maxlvt = lapic_get_maxlvt(); + + local_irq_save(flags); + + /* + * Make sure the APICBASE points to the right address + * + * FIXME! This will be wrong if we ever support suspend on + * SMP! We'll need to do this as part of the CPU restore! + */ + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + + apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); + apic_write(APIC_ID, apic_pm_state.apic_id); + apic_write(APIC_DFR, apic_pm_state.apic_dfr); + apic_write(APIC_LDR, apic_pm_state.apic_ldr); + apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri); + apic_write(APIC_SPIV, apic_pm_state.apic_spiv); + apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); + apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); +#ifdef CONFIG_X86_MCE_P4THERMAL + if (maxlvt >= 5) + apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); +#endif + if (maxlvt >= 4) + apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc); + apic_write(APIC_LVTT, apic_pm_state.apic_lvtt); + apic_write(APIC_TDCR, apic_pm_state.apic_tdcr); + apic_write(APIC_TMICT, apic_pm_state.apic_tmict); + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + local_irq_restore(flags); return 0; } -early_param("lapic", parse_lapic); -static int __init parse_nolapic(char *arg) +/* + * This device has no shutdown method - fully functioning local APICs + * are needed on every CPU up until machine_halt/restart/poweroff. + */ + +static struct sysdev_class lapic_sysclass = { + set_kset_name("lapic"), + .resume = lapic_resume, + .suspend = lapic_suspend, +}; + +static struct sys_device device_lapic = { + .id = 0, + .cls = &lapic_sysclass, +}; + +static void __devinit apic_pm_activate(void) { - lapic_disable(); - return 0; + apic_pm_state.active = 1; } -early_param("nolapic", parse_nolapic); +static int __init init_lapic_sysfs(void) +{ + int error; + + if (!cpu_has_apic) + return 0; + /* XXX: remove suspend/resume procs if !apic_pm_state.active? */ + + error = sysdev_class_register(&lapic_sysclass); + if (!error) + error = sysdev_register(&device_lapic); + return error; +} +device_initcall(init_lapic_sysfs); + +#else /* CONFIG_PM */ + +static void apic_pm_activate(void) { } + +#endif /* CONFIG_PM */ diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index db99a8948da..064bbf2861f 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -211,6 +211,7 @@ #include <linux/slab.h> #include <linux/stat.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/miscdevice.h> #include <linux/apm_bios.h> #include <linux/init.h> @@ -235,7 +236,6 @@ #include "io_ports.h" -extern unsigned long get_cmos_time(void); extern void machine_real_restart(unsigned char *, int); #if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) @@ -1175,28 +1175,6 @@ out: spin_unlock(&user_list_lock); } -static void set_time(void) -{ - struct timespec ts; - if (got_clock_diff) { /* Must know time zone in order to set clock */ - ts.tv_sec = get_cmos_time() + clock_cmos_diff; - ts.tv_nsec = 0; - do_settimeofday(&ts); - } -} - -static void get_time_diff(void) -{ -#ifndef CONFIG_APM_RTC_IS_GMT - /* - * Estimate time zone so that set_time can update the clock - */ - clock_cmos_diff = -get_cmos_time(); - clock_cmos_diff += get_seconds(); - got_clock_diff = 1; -#endif -} - static void reinit_timer(void) { #ifdef INIT_TIMER_AFTER_SUSPEND @@ -1236,19 +1214,6 @@ static int suspend(int vetoable) local_irq_disable(); device_power_down(PMSG_SUSPEND); - /* serialize with the timer interrupt */ - write_seqlock(&xtime_lock); - - /* protect against access to timer chip registers */ - spin_lock(&i8253_lock); - - get_time_diff(); - /* - * Irq spinlock must be dropped around set_system_power_state. - * We'll undo any timer changes due to interrupts below. - */ - spin_unlock(&i8253_lock); - write_sequnlock(&xtime_lock); local_irq_enable(); save_processor_state(); @@ -1257,7 +1222,6 @@ static int suspend(int vetoable) restore_processor_state(); local_irq_disable(); - set_time(); reinit_timer(); if (err == APM_NO_ERROR) @@ -1287,11 +1251,6 @@ static void standby(void) local_irq_disable(); device_power_down(PMSG_SUSPEND); - /* serialize with the timer interrupt */ - write_seqlock(&xtime_lock); - /* If needed, notify drivers here */ - get_time_diff(); - write_sequnlock(&xtime_lock); local_irq_enable(); err = set_system_power_state(APM_STATE_STANDBY); @@ -1385,7 +1344,6 @@ static void check_events(void) ignore_bounce = 1; if ((event != APM_NORMAL_RESUME) || (ignore_normal_resume == 0)) { - set_time(); device_resume(); pm_send_all(PM_RESUME, (void *)0); queue_event(event, NULL); @@ -1401,7 +1359,6 @@ static void check_events(void) break; case APM_UPDATE_TIME: - set_time(); break; case APM_CRITICAL_SUSPEND: @@ -1636,9 +1593,8 @@ static int do_open(struct inode * inode, struct file * filp) return 0; } -static int apm_get_info(char *buf, char **start, off_t fpos, int length) +static int proc_apm_show(struct seq_file *m, void *v) { - char * p; unsigned short bx; unsigned short cx; unsigned short dx; @@ -1650,8 +1606,6 @@ static int apm_get_info(char *buf, char **start, off_t fpos, int length) int time_units = -1; char *units = "?"; - p = buf; - if ((num_online_cpus() == 1) && !(error = apm_get_power_status(&bx, &cx, &dx))) { ac_line_status = (bx >> 8) & 0xff; @@ -1705,7 +1659,7 @@ static int apm_get_info(char *buf, char **start, off_t fpos, int length) -1: Unknown 8) min = minutes; sec = seconds */ - p += sprintf(p, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", + seq_printf(m, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", driver_version, (apm_info.bios.version >> 8) & 0xff, apm_info.bios.version & 0xff, @@ -1716,10 +1670,22 @@ static int apm_get_info(char *buf, char **start, off_t fpos, int length) percentage, time_units, units); + return 0; +} - return p - buf; +static int proc_apm_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_apm_show, NULL); } +static const struct file_operations apm_file_ops = { + .owner = THIS_MODULE, + .open = proc_apm_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static int apm(void *unused) { unsigned short bx; @@ -2341,9 +2307,9 @@ static int __init apm_init(void) set_base(gdt[APM_DS >> 3], __va((unsigned long)apm_info.bios.dseg << 4)); - apm_proc = create_proc_info_entry("apm", 0, NULL, apm_get_info); + apm_proc = create_proc_entry("apm", 0, NULL); if (apm_proc) - apm_proc->owner = THIS_MODULE; + apm_proc->proc_fops = &apm_file_ops; kapmd_task = kthread_create(apm, NULL, "kapmd"); if (IS_ERR(kapmd_task)) { diff --git a/arch/i386/kernel/asm-offsets.c b/arch/i386/kernel/asm-offsets.c index 1b2f3cd3327..c37535163bf 100644 --- a/arch/i386/kernel/asm-offsets.c +++ b/arch/i386/kernel/asm-offsets.c @@ -72,7 +72,7 @@ void foo(void) OFFSET(PT_EAX, pt_regs, eax); OFFSET(PT_DS, pt_regs, xds); OFFSET(PT_ES, pt_regs, xes); - OFFSET(PT_GS, pt_regs, xgs); + OFFSET(PT_FS, pt_regs, xfs); OFFSET(PT_ORIG_EAX, pt_regs, orig_eax); OFFSET(PT_EIP, pt_regs, eip); OFFSET(PT_CS, pt_regs, xcs); diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 8a8bbdaaf38..dcbbd0a8bfc 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -605,7 +605,7 @@ void __init early_cpu_init(void) struct pt_regs * __devinit idle_regs(struct pt_regs *regs) { memset(regs, 0, sizeof(struct pt_regs)); - regs->xgs = __KERNEL_PDA; + regs->xfs = __KERNEL_PDA; return regs; } @@ -662,12 +662,12 @@ struct i386_pda boot_pda = { .pcurrent = &init_task, }; -static inline void set_kernel_gs(void) +static inline void set_kernel_fs(void) { - /* Set %gs for this CPU's PDA. Memory clobber is to create a + /* Set %fs for this CPU's PDA. Memory clobber is to create a barrier with respect to any PDA operations, so the compiler doesn't move any before here. */ - asm volatile ("mov %0, %%gs" : : "r" (__KERNEL_PDA) : "memory"); + asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_PDA) : "memory"); } /* Initialize the CPU's GDT and PDA. The boot CPU does this for @@ -718,7 +718,7 @@ void __cpuinit cpu_set_gdt(int cpu) the boot CPU, this will transition from the boot gdt+pda to the real ones). */ load_gdt(cpu_gdt_descr); - set_kernel_gs(); + set_kernel_fs(); } /* Common CPU init for both boot and secondary CPUs */ @@ -764,8 +764,8 @@ static void __cpuinit _cpu_init(int cpu, struct task_struct *curr) __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss); #endif - /* Clear %fs. */ - asm volatile ("mov %0, %%fs" : : "r" (0)); + /* Clear %gs. */ + asm volatile ("mov %0, %%gs" : : "r" (0)); /* Clear all 6 debug registers: */ set_debugreg(0, 0); diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig index 5299c5bf445..6c52182ca32 100644 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ b/arch/i386/kernel/cpu/cpufreq/Kconfig @@ -217,6 +217,15 @@ config X86_LONGHAUL If in doubt, say N. +config X86_E_POWERSAVER + tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)" + select CPU_FREQ_TABLE + depends on EXPERIMENTAL + help + This adds the CPUFreq driver for VIA C7 processors. + + If in doubt, say N. + comment "shared options" config X86_ACPI_CPUFREQ_PROC_INTF diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile index 8de3abe322a..560f7760dae 100644 --- a/arch/i386/kernel/cpu/cpufreq/Makefile +++ b/arch/i386/kernel/cpu/cpufreq/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o obj-$(CONFIG_X86_LONGHAUL) += longhaul.o +obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o obj-$(CONFIG_X86_LONGRUN) += longrun.o diff --git a/arch/i386/kernel/cpu/cpufreq/e_powersaver.c b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c new file mode 100644 index 00000000000..f43d98e11cc --- /dev/null +++ b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c @@ -0,0 +1,334 @@ +/* + * Based on documentation provided by Dave Jones. Thanks! + * + * Licensed under the terms of the GNU GPL License version 2. + * + * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cpufreq.h> +#include <linux/ioport.h> +#include <linux/slab.h> + +#include <asm/msr.h> +#include <asm/tsc.h> +#include <asm/timex.h> +#include <asm/io.h> +#include <asm/delay.h> + +#define EPS_BRAND_C7M 0 +#define EPS_BRAND_C7 1 +#define EPS_BRAND_EDEN 2 +#define EPS_BRAND_C3 3 + +struct eps_cpu_data { + u32 fsb; + struct cpufreq_frequency_table freq_table[]; +}; + +static struct eps_cpu_data *eps_cpu[NR_CPUS]; + + +static unsigned int eps_get(unsigned int cpu) +{ + struct eps_cpu_data *centaur; + u32 lo, hi; + + if (cpu) + return 0; + centaur = eps_cpu[cpu]; + if (centaur == NULL) + return 0; + + /* Return current frequency */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + return centaur->fsb * ((lo >> 8) & 0xff); +} + +static int eps_set_state(struct eps_cpu_data *centaur, + unsigned int cpu, + u32 dest_state) +{ + struct cpufreq_freqs freqs; + u32 lo, hi; + int err = 0; + int i; + + freqs.old = eps_get(cpu); + freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff); + freqs.cpu = cpu; + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* Wait while CPU is busy */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i = 0; + while (lo & ((1 << 16) | (1 << 17))) { + udelay(16); + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i++; + if (unlikely(i > 64)) { + err = -ENODEV; + goto postchange; + } + } + /* Set new multiplier and voltage */ + wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0); + /* Wait until transition end */ + i = 0; + do { + udelay(16); + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + i++; + if (unlikely(i > 64)) { + err = -ENODEV; + goto postchange; + } + } while (lo & ((1 << 16) | (1 << 17))); + + /* Return current frequency */ +postchange: + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + freqs.new = centaur->fsb * ((lo >> 8) & 0xff); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + return err; +} + +static int eps_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct eps_cpu_data *centaur; + unsigned int newstate = 0; + unsigned int cpu = policy->cpu; + unsigned int dest_state; + int ret; + + if (unlikely(eps_cpu[cpu] == NULL)) + return -ENODEV; + centaur = eps_cpu[cpu]; + + if (unlikely(cpufreq_frequency_table_target(policy, + &eps_cpu[cpu]->freq_table[0], + target_freq, + relation, + &newstate))) { + return -EINVAL; + } + + /* Make frequency transition */ + dest_state = centaur->freq_table[newstate].index & 0xffff; + ret = eps_set_state(centaur, cpu, dest_state); + if (ret) + printk(KERN_ERR "eps: Timeout!\n"); + return ret; +} + +static int eps_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, + &eps_cpu[policy->cpu]->freq_table[0]); +} + +static int eps_cpu_init(struct cpufreq_policy *policy) +{ + unsigned int i; + u32 lo, hi; + u64 val; + u8 current_multiplier, current_voltage; + u8 max_multiplier, max_voltage; + u8 min_multiplier, min_voltage; + u8 brand; + u32 fsb; + struct eps_cpu_data *centaur; + struct cpufreq_frequency_table *f_table; + int k, step, voltage; + int ret; + int states; + + if (policy->cpu != 0) + return -ENODEV; + + /* Check brand */ + printk("eps: Detected VIA "); + rdmsr(0x1153, lo, hi); + brand = (((lo >> 2) ^ lo) >> 18) & 3; + switch(brand) { + case EPS_BRAND_C7M: + printk("C7-M\n"); + break; + case EPS_BRAND_C7: + printk("C7\n"); + break; + case EPS_BRAND_EDEN: + printk("Eden\n"); + break; + case EPS_BRAND_C3: + printk("C3\n"); + return -ENODEV; + break; + } + /* Enable Enhanced PowerSaver */ + rdmsrl(MSR_IA32_MISC_ENABLE, val); + if (!(val & 1 << 16)) { + val |= 1 << 16; + wrmsrl(MSR_IA32_MISC_ENABLE, val); + /* Can be locked at 0 */ + rdmsrl(MSR_IA32_MISC_ENABLE, val); + if (!(val & 1 << 16)) { + printk("eps: Can't enable Enhanced PowerSaver\n"); + return -ENODEV; + } + } + + /* Print voltage and multiplier */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + current_voltage = lo & 0xff; + printk("eps: Current voltage = %dmV\n", current_voltage * 16 + 700); + current_multiplier = (lo >> 8) & 0xff; + printk("eps: Current multiplier = %d\n", current_multiplier); + + /* Print limits */ + max_voltage = hi & 0xff; + printk("eps: Highest voltage = %dmV\n", max_voltage * 16 + 700); + max_multiplier = (hi >> 8) & 0xff; + printk("eps: Highest multiplier = %d\n", max_multiplier); + min_voltage = (hi >> 16) & 0xff; + printk("eps: Lowest voltage = %dmV\n", min_voltage * 16 + 700); + min_multiplier = (hi >> 24) & 0xff; + printk("eps: Lowest multiplier = %d\n", min_multiplier); + + /* Sanity checks */ + if (current_multiplier == 0 || max_multiplier == 0 + || min_multiplier == 0) + return -EINVAL; + if (current_multiplier > max_multiplier + || max_multiplier <= min_multiplier) + return -EINVAL; + if (current_voltage > 0x1c || max_voltage > 0x1c) + return -EINVAL; + if (max_voltage < min_voltage) + return -EINVAL; + + /* Calc FSB speed */ + fsb = cpu_khz / current_multiplier; + /* Calc number of p-states supported */ + if (brand == EPS_BRAND_C7M) + states = max_multiplier - min_multiplier + 1; + else + states = 2; + + /* Allocate private data and frequency table for current cpu */ + centaur = kzalloc(sizeof(struct eps_cpu_data) + + (states + 1) * sizeof(struct cpufreq_frequency_table), + GFP_KERNEL); + if (!centaur) + return -ENOMEM; + eps_cpu[0] = centaur; + + /* Copy basic values */ + centaur->fsb = fsb; + + /* Fill frequency and MSR value table */ + f_table = ¢aur->freq_table[0]; + if (brand != EPS_BRAND_C7M) { + f_table[0].frequency = fsb * min_multiplier; + f_table[0].index = (min_multiplier << 8) | min_voltage; + f_table[1].frequency = fsb * max_multiplier; + f_table[1].index = (max_multiplier << 8) | max_voltage; + f_table[2].frequency = CPUFREQ_TABLE_END; + } else { + k = 0; + step = ((max_voltage - min_voltage) * 256) + / (max_multiplier - min_multiplier); + for (i = min_multiplier; i <= max_multiplier; i++) { + voltage = (k * step) / 256 + min_voltage; + f_table[k].frequency = fsb * i; + f_table[k].index = (i << 8) | voltage; + k++; + } + f_table[k].frequency = CPUFREQ_TABLE_END; + } + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */ + policy->cur = fsb * current_multiplier; + + ret = cpufreq_frequency_table_cpuinfo(policy, ¢aur->freq_table[0]); + if (ret) { + kfree(centaur); + return ret; + } + + cpufreq_frequency_table_get_attr(¢aur->freq_table[0], policy->cpu); + return 0; +} + +static int eps_cpu_exit(struct cpufreq_policy *policy) +{ + unsigned int cpu = policy->cpu; + struct eps_cpu_data *centaur; + u32 lo, hi; + + if (eps_cpu[cpu] == NULL) + return -ENODEV; + centaur = eps_cpu[cpu]; + + /* Get max frequency */ + rdmsr(MSR_IA32_PERF_STATUS, lo, hi); + /* Set max frequency */ + eps_set_state(centaur, cpu, hi & 0xffff); + /* Bye */ + cpufreq_frequency_table_put_attr(policy->cpu); + kfree(eps_cpu[cpu]); + eps_cpu[cpu] = NULL; + return 0; +} + +static struct freq_attr* eps_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static struct cpufreq_driver eps_driver = { + .verify = eps_verify, + .target = eps_target, + .init = eps_cpu_init, + .exit = eps_cpu_exit, + .get = eps_get, + .name = "e_powersaver", + .owner = THIS_MODULE, + .attr = eps_attr, +}; + +static int __init eps_init(void) +{ + struct cpuinfo_x86 *c = cpu_data; + + /* This driver will work only on Centaur C7 processors with + * Enhanced SpeedStep/PowerSaver registers */ + if (c->x86_vendor != X86_VENDOR_CENTAUR + || c->x86 != 6 || c->x86_model != 10) + return -ENODEV; + if (!cpu_has(c, X86_FEATURE_EST)) + return -ENODEV; + + if (cpufreq_register_driver(&eps_driver)) + return -EINVAL; + return 0; +} + +static void __exit eps_exit(void) +{ + cpufreq_unregister_driver(&eps_driver); +} + +MODULE_AUTHOR("Rafa³ Bilski <rafalbilski@interia.pl>"); +MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's."); +MODULE_LICENSE("GPL"); + +module_init(eps_init); +module_exit(eps_exit); diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c index a3db9332d65..b59878a0d9b 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c @@ -8,12 +8,11 @@ * VIA have currently 3 different versions of Longhaul. * Version 1 (Longhaul) uses the BCR2 MSR at 0x1147. * It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0. - * Version 2 of longhaul is the same as v1, but adds voltage scaling. - * Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C) - * voltage scaling support has currently been disabled in this driver - * until we have code that gets it right. + * Version 2 of longhaul is backward compatible with v1, but adds + * LONGHAUL MSR for purpose of both frequency and voltage scaling. + * Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C). * Version 3 of longhaul got renamed to Powersaver and redesigned - * to use the POWERSAVER MSR at 0x110a. + * to use only the POWERSAVER MSR at 0x110a. * It is present in Ezra-T (C5M), Nehemiah (C5X) and above. * It's pretty much the same feature wise to longhaul v2, though * there is provision for scaling FSB too, but this doesn't work @@ -51,10 +50,12 @@ #define CPU_EZRA 3 #define CPU_EZRA_T 4 #define CPU_NEHEMIAH 5 +#define CPU_NEHEMIAH_C 6 /* Flags */ #define USE_ACPI_C3 (1 << 1) #define USE_NORTHBRIDGE (1 << 2) +#define USE_VT8235 (1 << 3) static int cpu_model; static unsigned int numscales=16; @@ -63,7 +64,8 @@ static unsigned int fsb; static struct mV_pos *vrm_mV_table; static unsigned char *mV_vrm_table; struct f_msr { - unsigned char vrm; + u8 vrm; + u8 pos; }; static struct f_msr f_msr_table[32]; @@ -73,10 +75,10 @@ static int can_scale_voltage; static struct acpi_processor *pr = NULL; static struct acpi_processor_cx *cx = NULL; static u8 longhaul_flags; +static u8 longhaul_pos; /* Module parameters */ static int scale_voltage; -static int ignore_latency; #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg) @@ -164,26 +166,47 @@ static void do_longhaul1(unsigned int clock_ratio_index) static void do_powersaver(int cx_address, unsigned int clock_ratio_index) { union msr_longhaul longhaul; + u8 dest_pos; u32 t; + dest_pos = f_msr_table[clock_ratio_index].pos; + rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Setup new frequency */ longhaul.bits.RevisionKey = longhaul.bits.RevisionID; longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf; longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; - longhaul.bits.EnableSoftBusRatio = 1; - - if (can_scale_voltage) { + /* Setup new voltage */ + if (can_scale_voltage) longhaul.bits.SoftVID = f_msr_table[clock_ratio_index].vrm; + /* Sync to timer tick */ + safe_halt(); + /* Raise voltage if necessary */ + if (can_scale_voltage && longhaul_pos < dest_pos) { longhaul.bits.EnableSoftVID = 1; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Change voltage */ + if (!cx_address) { + ACPI_FLUSH_CPU_CACHE(); + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 + * read */ + t = inl(acpi_gbl_FADT.xpm_timer_block.address); + } + longhaul.bits.EnableSoftVID = 0; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + longhaul_pos = dest_pos; } - /* Sync to timer tick */ - safe_halt(); /* Change frequency on next halt or sleep */ + longhaul.bits.EnableSoftBusRatio = 1; wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); if (!cx_address) { ACPI_FLUSH_CPU_CACHE(); - /* Invoke C1 */ halt(); } else { ACPI_FLUSH_CPU_CACHE(); @@ -193,12 +216,29 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index) t = inl(acpi_gbl_FADT.xpm_timer_block.address); } /* Disable bus ratio bit */ - local_irq_disable(); - longhaul.bits.RevisionKey = longhaul.bits.RevisionID; longhaul.bits.EnableSoftBusRatio = 0; - longhaul.bits.EnableSoftBSEL = 0; - longhaul.bits.EnableSoftVID = 0; wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + + /* Reduce voltage if necessary */ + if (can_scale_voltage && longhaul_pos > dest_pos) { + longhaul.bits.EnableSoftVID = 1; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + /* Change voltage */ + if (!cx_address) { + ACPI_FLUSH_CPU_CACHE(); + halt(); + } else { + ACPI_FLUSH_CPU_CACHE(); + /* Invoke C3 */ + inb(cx_address); + /* Dummy op - must do something useless after P_LVL3 + * read */ + t = inl(acpi_gbl_FADT.xpm_timer_block.address); + } + longhaul.bits.EnableSoftVID = 0; + wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); + longhaul_pos = dest_pos; + } } /** @@ -257,26 +297,19 @@ static void longhaul_setstate(unsigned int clock_ratio_index) /* * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B]) * Software controlled multipliers only. - * - * *NB* Until we get voltage scaling working v1 & v2 are the same code. - * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5b] and Ezra [C5C] */ case TYPE_LONGHAUL_V1: - case TYPE_LONGHAUL_V2: do_longhaul1(clock_ratio_index); break; /* + * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C] + * * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N]) - * We can scale voltage with this too, but that's currently - * disabled until we come up with a decent 'match freq to voltage' - * algorithm. - * When we add voltage scaling, we will also need to do the - * voltage/freq setting in order depending on the direction - * of scaling (like we do in powernow-k7.c) * Nehemiah can do FSB scaling too, but this has never been proven * to work in practice. */ + case TYPE_LONGHAUL_V2: case TYPE_POWERSAVER: if (longhaul_flags & USE_ACPI_C3) { /* Don't allow wakeup */ @@ -301,6 +334,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index) local_irq_restore(flags); preempt_enable(); + freqs.new = calc_speed(longhaul_get_cpu_mult()); cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); } @@ -315,31 +349,19 @@ static void longhaul_setstate(unsigned int clock_ratio_index) #define ROUNDING 0xf -static int _guess(int guess, int mult) -{ - int target; - - target = ((mult/10)*guess); - if (mult%10 != 0) - target += (guess/2); - target += ROUNDING/2; - target &= ~ROUNDING; - return target; -} - - static int guess_fsb(int mult) { - int speed = (cpu_khz/1000); + int speed = cpu_khz / 1000; int i; - int speeds[] = { 66, 100, 133, 200 }; - - speed += ROUNDING/2; - speed &= ~ROUNDING; - - for (i=0; i<4; i++) { - if (_guess(speeds[i], mult) == speed) - return speeds[i]; + int speeds[] = { 666, 1000, 1333, 2000 }; + int f_max, f_min; + + for (i = 0; i < 4; i++) { + f_max = ((speeds[i] * mult) + 50) / 100; + f_max += (ROUNDING / 2); + f_min = f_max - ROUNDING; + if ((speed <= f_max) && (speed >= f_min)) + return speeds[i] / 10; } return 0; } @@ -347,67 +369,40 @@ static int guess_fsb(int mult) static int __init longhaul_get_ranges(void) { - unsigned long invalue; - unsigned int ezra_t_multipliers[32]= { - 90, 30, 40, 100, 55, 35, 45, 95, - 50, 70, 80, 60, 120, 75, 85, 65, - -1, 110, 120, -1, 135, 115, 125, 105, - 130, 150, 160, 140, -1, 155, -1, 145 }; unsigned int j, k = 0; - union msr_longhaul longhaul; - int mult = 0; + int mult; - switch (longhaul_version) { - case TYPE_LONGHAUL_V1: - case TYPE_LONGHAUL_V2: - /* Ugh, Longhaul v1 didn't have the min/max MSRs. - Assume min=3.0x & max = whatever we booted at. */ + /* Get current frequency */ + mult = longhaul_get_cpu_mult(); + if (mult == -1) { + printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n"); + return -EINVAL; + } + fsb = guess_fsb(mult); + if (fsb == 0) { + printk(KERN_INFO PFX "Invalid (reserved) FSB!\n"); + return -EINVAL; + } + /* Get max multiplier - as we always did. + * Longhaul MSR is usefull only when voltage scaling is enabled. + * C3 is booting at max anyway. */ + maxmult = mult; + /* Get min multiplier */ + switch (cpu_model) { + case CPU_NEHEMIAH: + minmult = 50; + break; + case CPU_NEHEMIAH_C: + minmult = 40; + break; + default: minmult = 30; - maxmult = mult = longhaul_get_cpu_mult(); break; - - case TYPE_POWERSAVER: - /* Ezra-T */ - if (cpu_model==CPU_EZRA_T) { - minmult = 30; - rdmsrl (MSR_VIA_LONGHAUL, longhaul.val); - invalue = longhaul.bits.MaxMHzBR; - if (longhaul.bits.MaxMHzBR4) - invalue += 16; - maxmult = mult = ezra_t_multipliers[invalue]; - break; - } - - /* Nehemiah */ - if (cpu_model==CPU_NEHEMIAH) { - rdmsrl (MSR_VIA_LONGHAUL, longhaul.val); - - /* - * TODO: This code works, but raises a lot of questions. - * - Some Nehemiah's seem to have broken Min/MaxMHzBR's. - * We get around this by using a hardcoded multiplier of 4.0x - * for the minimimum speed, and the speed we booted up at for the max. - * This is done in longhaul_get_cpu_mult() by reading the EBLCR register. - * - According to some VIA documentation EBLCR is only - * in pre-Nehemiah C3s. How this still works is a mystery. - * We're possibly using something undocumented and unsupported, - * But it works, so we don't grumble. - */ - minmult=40; - maxmult = mult = longhaul_get_cpu_mult(); - break; - } } - fsb = guess_fsb(mult); dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n", minmult/10, minmult%10, maxmult/10, maxmult%10); - if (fsb == 0) { - printk (KERN_INFO PFX "Invalid (reserved) FSB!\n"); - return -EINVAL; - } - highest_speed = calc_speed(maxmult); lowest_speed = calc_speed(minmult); dprintk ("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, @@ -455,6 +450,7 @@ static void __init longhaul_setup_voltagescaling(void) union msr_longhaul longhaul; struct mV_pos minvid, maxvid; unsigned int j, speed, pos, kHz_step, numvscales; + int min_vid_speed; rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); if (!(longhaul.bits.RevisionID & 1)) { @@ -468,14 +464,14 @@ static void __init longhaul_setup_voltagescaling(void) mV_vrm_table = &mV_vrm85[0]; } else { printk (KERN_INFO PFX "Mobile VRM\n"); + if (cpu_model < CPU_NEHEMIAH) + return; vrm_mV_table = &mobilevrm_mV[0]; mV_vrm_table = &mV_mobilevrm[0]; } minvid = vrm_mV_table[longhaul.bits.MinimumVID]; maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; - numvscales = maxvid.pos - minvid.pos + 1; - kHz_step = (highest_speed - lowest_speed) / numvscales; if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " @@ -491,20 +487,59 @@ static void __init longhaul_setup_voltagescaling(void) return; } - printk(KERN_INFO PFX "Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n", + /* How many voltage steps */ + numvscales = maxvid.pos - minvid.pos + 1; + printk(KERN_INFO PFX + "Max VID=%d.%03d " + "Min VID=%d.%03d, " + "%d possible voltage scales\n", maxvid.mV/1000, maxvid.mV%1000, minvid.mV/1000, minvid.mV%1000, numvscales); + /* Calculate max frequency at min voltage */ + j = longhaul.bits.MinMHzBR; + if (longhaul.bits.MinMHzBR4) + j += 16; + min_vid_speed = eblcr_table[j]; + if (min_vid_speed == -1) + return; + switch (longhaul.bits.MinMHzFSB) { + case 0: + min_vid_speed *= 13333; + break; + case 1: + min_vid_speed *= 10000; + break; + case 3: + min_vid_speed *= 6666; + break; + default: + return; + break; + } + if (min_vid_speed >= highest_speed) + return; + /* Calculate kHz for one voltage step */ + kHz_step = (highest_speed - min_vid_speed) / numvscales; + + j = 0; while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) { speed = longhaul_table[j].frequency; - pos = (speed - lowest_speed) / kHz_step + minvid.pos; + if (speed > min_vid_speed) + pos = (speed - min_vid_speed) / kHz_step + minvid.pos; + else + pos = minvid.pos; f_msr_table[longhaul_table[j].index].vrm = mV_vrm_table[pos]; + f_msr_table[longhaul_table[j].index].pos = pos; j++; } + longhaul_pos = maxvid.pos; can_scale_voltage = 1; + printk(KERN_INFO PFX "Voltage scaling enabled. " + "Use of \"conservative\" governor is highly recommended.\n"); } @@ -573,20 +608,51 @@ static int enable_arbiter_disable(void) if (dev != NULL) { /* Enable access to port 0x22 */ pci_read_config_byte(dev, reg, &pci_cmd); - if ( !(pci_cmd & 1<<7) ) { + if (!(pci_cmd & 1<<7)) { pci_cmd |= 1<<7; pci_write_config_byte(dev, reg, pci_cmd); + pci_read_config_byte(dev, reg, &pci_cmd); + if (!(pci_cmd & 1<<7)) { + printk(KERN_ERR PFX + "Can't enable access to port 0x22.\n"); + return 0; + } } return 1; } return 0; } +static int longhaul_setup_vt8235(void) +{ + struct pci_dev *dev; + u8 pci_cmd; + + /* Find VT8235 southbridge */ + dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); + if (dev != NULL) { + /* Set transition time to max */ + pci_read_config_byte(dev, 0xec, &pci_cmd); + pci_cmd &= ~(1 << 2); + pci_write_config_byte(dev, 0xec, pci_cmd); + pci_read_config_byte(dev, 0xe4, &pci_cmd); + pci_cmd &= ~(1 << 7); + pci_write_config_byte(dev, 0xe4, pci_cmd); + pci_read_config_byte(dev, 0xe5, &pci_cmd); + pci_cmd |= 1 << 7; + pci_write_config_byte(dev, 0xe5, pci_cmd); + return 1; + } + return 0; +} + static int __init longhaul_cpu_init(struct cpufreq_policy *policy) { struct cpuinfo_x86 *c = cpu_data; char *cpuname=NULL; int ret; + u32 lo, hi; + int vt8235_present; /* Check what we have on this motherboard */ switch (c->x86_model) { @@ -599,16 +665,20 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) break; case 7: - longhaul_version = TYPE_LONGHAUL_V1; switch (c->x86_mask) { case 0: + longhaul_version = TYPE_LONGHAUL_V1; cpu_model = CPU_SAMUEL2; cpuname = "C3 'Samuel 2' [C5B]"; - /* Note, this is not a typo, early Samuel2's had Samuel1 ratios. */ - memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio)); - memcpy (eblcr_table, samuel2_eblcr, sizeof(samuel2_eblcr)); + /* Note, this is not a typo, early Samuel2's had + * Samuel1 ratios. */ + memcpy(clock_ratio, samuel1_clock_ratio, + sizeof(samuel1_clock_ratio)); + memcpy(eblcr_table, samuel2_eblcr, + sizeof(samuel2_eblcr)); break; case 1 ... 15: + longhaul_version = TYPE_LONGHAUL_V2; if (c->x86_mask < 8) { cpu_model = CPU_SAMUEL2; cpuname = "C3 'Samuel 2' [C5B]"; @@ -616,8 +686,10 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpu_model = CPU_EZRA; cpuname = "C3 'Ezra' [C5C]"; } - memcpy (clock_ratio, ezra_clock_ratio, sizeof(ezra_clock_ratio)); - memcpy (eblcr_table, ezra_eblcr, sizeof(ezra_eblcr)); + memcpy(clock_ratio, ezra_clock_ratio, + sizeof(ezra_clock_ratio)); + memcpy(eblcr_table, ezra_eblcr, + sizeof(ezra_eblcr)); break; } break; @@ -632,24 +704,24 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) break; case 9: - cpu_model = CPU_NEHEMIAH; longhaul_version = TYPE_POWERSAVER; - numscales=32; + numscales = 32; + memcpy(clock_ratio, + nehemiah_clock_ratio, + sizeof(nehemiah_clock_ratio)); + memcpy(eblcr_table, nehemiah_eblcr, sizeof(nehemiah_eblcr)); switch (c->x86_mask) { case 0 ... 1: - cpuname = "C3 'Nehemiah A' [C5N]"; - memcpy (clock_ratio, nehemiah_a_clock_ratio, sizeof(nehemiah_a_clock_ratio)); - memcpy (eblcr_table, nehemiah_a_eblcr, sizeof(nehemiah_a_eblcr)); + cpu_model = CPU_NEHEMIAH; + cpuname = "C3 'Nehemiah A' [C5XLOE]"; break; case 2 ... 4: - cpuname = "C3 'Nehemiah B' [C5N]"; - memcpy (clock_ratio, nehemiah_b_clock_ratio, sizeof(nehemiah_b_clock_ratio)); - memcpy (eblcr_table, nehemiah_b_eblcr, sizeof(nehemiah_b_eblcr)); + cpu_model = CPU_NEHEMIAH; + cpuname = "C3 'Nehemiah B' [C5XLOH]"; break; case 5 ... 15: - cpuname = "C3 'Nehemiah C' [C5N]"; - memcpy (clock_ratio, nehemiah_c_clock_ratio, sizeof(nehemiah_c_clock_ratio)); - memcpy (eblcr_table, nehemiah_c_eblcr, sizeof(nehemiah_c_eblcr)); + cpu_model = CPU_NEHEMIAH_C; + cpuname = "C3 'Nehemiah C' [C5P]"; break; } break; @@ -658,6 +730,13 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpuname = "Unknown"; break; } + /* Check Longhaul ver. 2 */ + if (longhaul_version == TYPE_LONGHAUL_V2) { + rdmsr(MSR_VIA_LONGHAUL, lo, hi); + if (lo == 0 && hi == 0) + /* Looks like MSR isn't present */ + longhaul_version = TYPE_LONGHAUL_V1; + } printk (KERN_INFO PFX "VIA %s CPU detected. ", cpuname); switch (longhaul_version) { @@ -670,15 +749,18 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) break; }; + /* Doesn't hurt */ + vt8235_present = longhaul_setup_vt8235(); + /* Find ACPI data for processor */ - acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, - &longhaul_walk_callback, NULL, (void *)&pr); + acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, &longhaul_walk_callback, + NULL, (void *)&pr); /* Check ACPI support for C3 state */ - if ((pr != NULL) && (longhaul_version == TYPE_POWERSAVER)) { + if (pr != NULL && longhaul_version != TYPE_LONGHAUL_V1) { cx = &pr->power.states[ACPI_STATE_C3]; - if (cx->address > 0 && - (cx->latency <= 1000 || ignore_latency != 0) ) { + if (cx->address > 0 && cx->latency <= 1000) { longhaul_flags |= USE_ACPI_C3; goto print_support_type; } @@ -688,8 +770,11 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) longhaul_flags |= USE_NORTHBRIDGE; goto print_support_type; } - - /* No ACPI C3 or we can't use it */ + /* Use VT8235 southbridge if present */ + if (longhaul_version == TYPE_POWERSAVER && vt8235_present) { + longhaul_flags |= USE_VT8235; + goto print_support_type; + } /* Check ACPI support for bus master arbiter disable */ if ((pr == NULL) || !(pr->flags.bm_control)) { printk(KERN_ERR PFX @@ -698,18 +783,18 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) } print_support_type: - if (!(longhaul_flags & USE_NORTHBRIDGE)) { - printk (KERN_INFO PFX "Using ACPI support.\n"); - } else { + if (longhaul_flags & USE_NORTHBRIDGE) printk (KERN_INFO PFX "Using northbridge support.\n"); - } + else if (longhaul_flags & USE_VT8235) + printk (KERN_INFO PFX "Using VT8235 support.\n"); + else + printk (KERN_INFO PFX "Using ACPI support.\n"); ret = longhaul_get_ranges(); if (ret != 0) return ret; - if ((longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) && - (scale_voltage != 0)) + if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0)) longhaul_setup_voltagescaling(); policy->governor = CPUFREQ_DEFAULT_GOVERNOR; @@ -797,8 +882,6 @@ static void __exit longhaul_exit(void) module_param (scale_voltage, int, 0644); MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); -module_param(ignore_latency, int, 0644); -MODULE_PARM_DESC(ignore_latency, "Skip ACPI C3 latency test"); MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>"); MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors."); diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/i386/kernel/cpu/cpufreq/longhaul.h index bc4682aad69..bb0a04b1d1a 100644 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.h +++ b/arch/i386/kernel/cpu/cpufreq/longhaul.h @@ -235,84 +235,14 @@ static int __initdata ezrat_eblcr[32] = { /* * VIA C3 Nehemiah */ -static int __initdata nehemiah_a_clock_ratio[32] = { +static int __initdata nehemiah_clock_ratio[32] = { 100, /* 0000 -> 10.0x */ 160, /* 0001 -> 16.0x */ - -1, /* 0010 -> RESERVED */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - -1, /* 0101 -> RESERVED */ - -1, /* 0110 -> RESERVED */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ - 100, /* 0000 -> 10.0x */ - -1, /* 0001 -> RESERVED */ - 120, /* 0010 -> 12.0x */ - 90, /* 0011 -> 9.0x */ - 105, /* 0100 -> 10.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 135, /* 0111 -> 13.5x */ - 140, /* 1000 -> 14.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 130, /* 1011 -> 13.0x */ - 145, /* 1100 -> 14.5x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 120, /* 1111 -> 12.0x */ -}; - -static int __initdata nehemiah_b_clock_ratio[32] = { - 100, /* 0000 -> 10.0x */ - 160, /* 0001 -> 16.0x */ - -1, /* 0010 -> RESERVED */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - -1, /* 0101 -> RESERVED */ - -1, /* 0110 -> RESERVED */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ - 100, /* 0000 -> 10.0x */ - 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ - 90, /* 0011 -> 9.0x */ - 105, /* 0100 -> 10.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 135, /* 0111 -> 13.5x */ - 140, /* 1000 -> 14.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 130, /* 1011 -> 13.0x */ - 145, /* 1100 -> 14.5x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 120, /* 1111 -> 12.0x */ -}; - -static int __initdata nehemiah_c_clock_ratio[32] = { - 100, /* 0000 -> 10.0x */ - 160, /* 0001 -> 16.0x */ - 40, /* 0010 -> RESERVED */ + 40, /* 0010 -> 4.0x */ 90, /* 0011 -> 9.0x */ 95, /* 0100 -> 9.5x */ -1, /* 0101 -> RESERVED */ - 45, /* 0110 -> RESERVED */ + 45, /* 0110 -> 4.5x */ 55, /* 0111 -> 5.5x */ 60, /* 1000 -> 6.0x */ 70, /* 1001 -> 7.0x */ @@ -340,84 +270,14 @@ static int __initdata nehemiah_c_clock_ratio[32] = { 120, /* 1111 -> 12.0x */ }; -static int __initdata nehemiah_a_eblcr[32] = { - 50, /* 0000 -> 5.0x */ - 160, /* 0001 -> 16.0x */ - -1, /* 0010 -> RESERVED */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - -1, /* 0101 -> RESERVED */ - -1, /* 0110 -> RESERVED */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ - 90, /* 0000 -> 9.0x */ - -1, /* 0001 -> RESERVED */ - 120, /* 0010 -> 12.0x */ - 100, /* 0011 -> 10.0x */ - 135, /* 0100 -> 13.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 105, /* 0111 -> 10.5x */ - 130, /* 1000 -> 13.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 140, /* 1011 -> 14.0x */ - 120, /* 1100 -> 12.0x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 145 /* 1111 -> 14.5x */ - /* end of table */ -}; -static int __initdata nehemiah_b_eblcr[32] = { - 50, /* 0000 -> 5.0x */ - 160, /* 0001 -> 16.0x */ - -1, /* 0010 -> RESERVED */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - -1, /* 0101 -> RESERVED */ - -1, /* 0110 -> RESERVED */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ - 90, /* 0000 -> 9.0x */ - 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ - 100, /* 0011 -> 10.0x */ - 135, /* 0100 -> 13.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 105, /* 0111 -> 10.5x */ - 130, /* 1000 -> 13.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 140, /* 1011 -> 14.0x */ - 120, /* 1100 -> 12.0x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 145 /* 1111 -> 14.5x */ - /* end of table */ -}; -static int __initdata nehemiah_c_eblcr[32] = { +static int __initdata nehemiah_eblcr[32] = { 50, /* 0000 -> 5.0x */ 160, /* 0001 -> 16.0x */ - 40, /* 0010 -> RESERVED */ + 40, /* 0010 -> 4.0x */ 100, /* 0011 -> 10.0x */ 55, /* 0100 -> 5.5x */ -1, /* 0101 -> RESERVED */ - 45, /* 0110 -> RESERVED */ + 45, /* 0110 -> 4.5x */ 95, /* 0111 -> 9.5x */ 90, /* 1000 -> 9.0x */ 70, /* 1001 -> 7.0x */ @@ -443,7 +303,6 @@ static int __initdata nehemiah_c_eblcr[32] = { 155, /* 1101 -> 15.5x */ -1, /* 1110 -> RESERVED (13.0x) */ 145 /* 1111 -> 14.5x */ - /* end of table */ }; /* diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c index 2d649167255..fe3b67005eb 100644 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c @@ -1289,7 +1289,11 @@ static unsigned int powernowk8_get (unsigned int cpu) if (query_current_values_with_pending_wait(data)) goto out; - khz = find_khz_freq_from_fid(data->currfid); + if (cpu_family == CPU_HW_PSTATE) + khz = find_khz_freq_from_fiddid(data->currfid, data->currdid); + else + khz = find_khz_freq_from_fid(data->currfid); + out: set_cpus_allowed(current, oldmask); diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c index c0c3b59de32..de27bd07bc9 100644 --- a/arch/i386/kernel/cpu/cyrix.c +++ b/arch/i386/kernel/cpu/cyrix.c @@ -6,6 +6,7 @@ #include <asm/io.h> #include <asm/processor.h> #include <asm/timer.h> +#include <asm/pci-direct.h> #include "cpu.h" @@ -161,19 +162,19 @@ static void __cpuinit set_cx86_inc(void) static void __cpuinit geode_configure(void) { unsigned long flags; - u8 ccr3, ccr4; + u8 ccr3; local_irq_save(flags); /* Suspend on halt power saving and enable #SUSP pin */ setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88); ccr3 = getCx86(CX86_CCR3); - setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* Enable */ - - ccr4 = getCx86(CX86_CCR4); - ccr4 |= 0x38; /* FPU fast, DTE cache, Mem bypass */ + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ - setCx86(CX86_CCR3, ccr3); + + /* FPU fast, DTE cache, Mem bypass */ + setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38); + setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ set_cx86_memwb(); set_cx86_reorder(); @@ -183,14 +184,6 @@ static void __cpuinit geode_configure(void) } -#ifdef CONFIG_PCI -static struct pci_device_id __cpuinitdata cyrix_55x0[] = { - { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510) }, - { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520) }, - { }, -}; -#endif - static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) { unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0; @@ -258,6 +251,8 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */ #ifdef CONFIG_PCI + { + u32 vendor, device; /* It isn't really a PCI quirk directly, but the cure is the same. The MediaGX has deep magic SMM stuff that handles the SB emulation. It thows away the fifo on disable_dma() which @@ -273,22 +268,34 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n"); isa_dma_bridge_buggy = 2; + /* We do this before the PCI layer is running. However we + are safe here as we know the bridge must be a Cyrix + companion and must be present */ + vendor = read_pci_config_16(0, 0, 0x12, PCI_VENDOR_ID); + device = read_pci_config_16(0, 0, 0x12, PCI_DEVICE_ID); /* * The 5510/5520 companion chips have a funky PIT. */ - if (pci_dev_present(cyrix_55x0)) + if (vendor == PCI_VENDOR_ID_CYRIX && + (device == PCI_DEVICE_ID_CYRIX_5510 || device == PCI_DEVICE_ID_CYRIX_5520)) pit_latch_buggy = 1; + } #endif c->x86_cache_size=16; /* Yep 16K integrated cache thats it */ /* GXm supports extended cpuid levels 'ala' AMD */ if (c->cpuid_level == 2) { /* Enable cxMMX extensions (GX1 Datasheet 54) */ - setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1); + setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1); - /* GXlv/GXm/GX1 */ - if((dir1 >= 0x50 && dir1 <= 0x54) || dir1 >= 0x63) + /* + * GXm : 0x30 ... 0x5f GXm datasheet 51 + * GXlv: 0x6x GXlv datasheet 54 + * ? : 0x7x + * GX1 : 0x8x GX1 datasheet 56 + */ + if((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <=dir1 && dir1 <= 0x8f)) geode_configure(); get_model_name(c); /* get CPU marketing name */ return; @@ -415,15 +422,14 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 * c) if (dir0 == 5 || dir0 == 3) { - unsigned char ccr3, ccr4; + unsigned char ccr3; unsigned long flags; printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n"); local_irq_save(flags); ccr3 = getCx86(CX86_CCR3); - setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ - ccr4 = getCx86(CX86_CCR4); - setCx86(CX86_CCR4, ccr4 | 0x80); /* enable cpuid */ - setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ + setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */ + setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80); /* enable cpuid */ + setCx86(CX86_CCR3, ccr3); /* disable MAPEN */ local_irq_restore(flags); } } diff --git a/arch/i386/kernel/cpu/mcheck/mce.c b/arch/i386/kernel/cpu/mcheck/mce.c index d555bec0db9..4f10c62d180 100644 --- a/arch/i386/kernel/cpu/mcheck/mce.c +++ b/arch/i386/kernel/cpu/mcheck/mce.c @@ -12,6 +12,7 @@ #include <asm/processor.h> #include <asm/system.h> +#include <asm/mce.h> #include "mce.h" diff --git a/arch/i386/kernel/cpu/mcheck/mce.h b/arch/i386/kernel/cpu/mcheck/mce.h index 84fd4cf7d0f..81fb6e2d35f 100644 --- a/arch/i386/kernel/cpu/mcheck/mce.h +++ b/arch/i386/kernel/cpu/mcheck/mce.h @@ -1,4 +1,5 @@ #include <linux/init.h> +#include <asm/mce.h> void amd_mcheck_init(struct cpuinfo_x86 *c); void intel_p4_mcheck_init(struct cpuinfo_x86 *c); @@ -9,6 +10,5 @@ void winchip_mcheck_init(struct cpuinfo_x86 *c); /* Call the installed machine check handler for this CPU setup. */ extern fastcall void (*machine_check_vector)(struct pt_regs *, long error_code); -extern int mce_disabled; extern int nr_mce_banks; diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c index 504434a4601..8359c19d3a2 100644 --- a/arch/i386/kernel/cpu/mcheck/p4.c +++ b/arch/i386/kernel/cpu/mcheck/p4.c @@ -12,6 +12,7 @@ #include <asm/system.h> #include <asm/msr.h> #include <asm/apic.h> +#include <asm/idle.h> #include <asm/therm_throt.h> @@ -59,6 +60,7 @@ static void (*vendor_thermal_interrupt)(struct pt_regs *regs) = unexpected_therm fastcall void smp_thermal_interrupt(struct pt_regs *regs) { + exit_idle(); irq_enter(); vendor_thermal_interrupt(regs); irq_exit(); diff --git a/arch/i386/kernel/cpu/mtrr/if.c b/arch/i386/kernel/cpu/mtrr/if.c index ee771f305f9..c7d8f175674 100644 --- a/arch/i386/kernel/cpu/mtrr/if.c +++ b/arch/i386/kernel/cpu/mtrr/if.c @@ -211,6 +211,9 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg) default: return -ENOTTY; case MTRRIOC_ADD_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_ADD_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = @@ -218,21 +221,33 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg) file, 0); break; case MTRRIOC_SET_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_SET_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_add(sentry.base, sentry.size, sentry.type, 0); break; case MTRRIOC_DEL_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_DEL_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_file_del(sentry.base, sentry.size, file, 0); break; case MTRRIOC_KILL_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_KILL_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_del(-1, sentry.base, sentry.size); break; case MTRRIOC_GET_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_GET_ENTRY: +#endif if (gentry.regnum >= num_var_ranges) return -EINVAL; mtrr_if->get(gentry.regnum, &gentry.base, &size, &type); @@ -249,6 +264,9 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg) break; case MTRRIOC_ADD_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_ADD_PAGE_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = @@ -256,21 +274,33 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg) file, 1); break; case MTRRIOC_SET_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_SET_PAGE_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_add_page(sentry.base, sentry.size, sentry.type, 0); break; case MTRRIOC_DEL_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_DEL_PAGE_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_file_del(sentry.base, sentry.size, file, 1); break; case MTRRIOC_KILL_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_KILL_PAGE_ENTRY: +#endif if (!capable(CAP_SYS_ADMIN)) return -EPERM; err = mtrr_del_page(-1, sentry.base, sentry.size); break; case MTRRIOC_GET_PAGE_ENTRY: +#ifdef CONFIG_COMPAT + case MTRRIOC32_GET_PAGE_ENTRY: +#endif if (gentry.regnum >= num_var_ranges) return -EINVAL; mtrr_if->get(gentry.regnum, &gentry.base, &size, &type); diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/i386/kernel/cpu/mtrr/main.c index 16bb7ea8714..0acfb6a5a22 100644 --- a/arch/i386/kernel/cpu/mtrr/main.c +++ b/arch/i386/kernel/cpu/mtrr/main.c @@ -50,7 +50,7 @@ u32 num_var_ranges = 0; unsigned int *usage_table; static DEFINE_MUTEX(mtrr_mutex); -u32 size_or_mask, size_and_mask; +u64 size_or_mask, size_and_mask; static struct mtrr_ops * mtrr_ops[X86_VENDOR_NUM] = {}; @@ -662,8 +662,8 @@ void __init mtrr_bp_init(void) boot_cpu_data.x86_mask == 0x4)) phys_addr = 36; - size_or_mask = ~((1 << (phys_addr - PAGE_SHIFT)) - 1); - size_and_mask = ~size_or_mask & 0xfff00000; + size_or_mask = ~((1ULL << (phys_addr - PAGE_SHIFT)) - 1); + size_and_mask = ~size_or_mask & 0xfffff00000ULL; } else if (boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR && boot_cpu_data.x86 == 6) { /* VIA C* family have Intel style MTRRs, but diff --git a/arch/i386/kernel/cpu/mtrr/mtrr.h b/arch/i386/kernel/cpu/mtrr/mtrr.h index d61ea9db6cf..289dfe6030e 100644 --- a/arch/i386/kernel/cpu/mtrr/mtrr.h +++ b/arch/i386/kernel/cpu/mtrr/mtrr.h @@ -84,7 +84,7 @@ void get_mtrr_state(void); extern void set_mtrr_ops(struct mtrr_ops * ops); -extern u32 size_or_mask, size_and_mask; +extern u64 size_or_mask, size_and_mask; extern struct mtrr_ops * mtrr_if; #define is_cpu(vnd) (mtrr_if && mtrr_if->vendor == X86_VENDOR_##vnd) diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c index 6624d8583c4..47e3ebbfb28 100644 --- a/arch/i386/kernel/cpu/proc.c +++ b/arch/i386/kernel/cpu/proc.c @@ -29,7 +29,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL, NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL, - NULL, "fxsr_opt", "rdtscp", NULL, NULL, "lm", "3dnowext", "3dnow", + NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", "3dnowext", "3dnow", /* Transmeta-defined */ "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL, @@ -47,7 +47,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) /* Intel-defined (#2) */ "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, - NULL, NULL, "dca", NULL, NULL, NULL, NULL, NULL, + NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* VIA/Cyrix/Centaur-defined */ @@ -57,8 +57,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* AMD-defined (#2) */ - "lahf_lm", "cmp_legacy", "svm", NULL, "cr8legacy", NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8legacy", "abm", + "sse4a", "misalignsse", + "3dnowprefetch", "osvw", "ibs", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, }; @@ -69,8 +70,11 @@ static int show_cpuinfo(struct seq_file *m, void *v) "ttp", /* thermal trip */ "tm", "stc", + "100mhzsteps", + "hwpstate", NULL, - /* nothing */ /* constant_tsc - moved to flags */ + NULL, /* constant_tsc - moved to flags */ + /* nothing */ }; struct cpuinfo_x86 *c = v; int i, n = c - cpu_data; diff --git a/arch/i386/kernel/cpu/transmeta.c b/arch/i386/kernel/cpu/transmeta.c index 4056fb7d2cd..5678d46863c 100644 --- a/arch/i386/kernel/cpu/transmeta.c +++ b/arch/i386/kernel/cpu/transmeta.c @@ -9,7 +9,7 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) { unsigned int cap_mask, uk, max, dummy; unsigned int cms_rev1, cms_rev2; - unsigned int cpu_rev, cpu_freq, cpu_flags, new_cpu_rev; + unsigned int cpu_rev, cpu_freq = 0, cpu_flags, new_cpu_rev; char cpu_info[65]; get_model_name(c); /* Same as AMD/Cyrix */ @@ -72,6 +72,9 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) wrmsr(0x80860004, ~0, uk); c->x86_capability[0] = cpuid_edx(0x00000001); wrmsr(0x80860004, cap_mask, uk); + + /* All Transmeta CPUs have a constant TSC */ + set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability); /* If we can run i686 user-space code, call us an i686 */ #define USER686 (X86_FEATURE_TSC|X86_FEATURE_CX8|X86_FEATURE_CMOV) diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c index 4da75fa3208..eeae0d99233 100644 --- a/arch/i386/kernel/cpuid.c +++ b/arch/i386/kernel/cpuid.c @@ -48,7 +48,6 @@ static struct class *cpuid_class; #ifdef CONFIG_SMP struct cpuid_command { - int cpu; u32 reg; u32 *data; }; @@ -57,8 +56,7 @@ static void cpuid_smp_cpuid(void *cmd_block) { struct cpuid_command *cmd = (struct cpuid_command *)cmd_block; - if (cmd->cpu == smp_processor_id()) - cpuid(cmd->reg, &cmd->data[0], &cmd->data[1], &cmd->data[2], + cpuid(cmd->reg, &cmd->data[0], &cmd->data[1], &cmd->data[2], &cmd->data[3]); } @@ -70,11 +68,10 @@ static inline void do_cpuid(int cpu, u32 reg, u32 * data) if (cpu == smp_processor_id()) { cpuid(reg, &data[0], &data[1], &data[2], &data[3]); } else { - cmd.cpu = cpu; cmd.reg = reg; cmd.data = data; - smp_call_function(cpuid_smp_cpuid, &cmd, 1, 1); + smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1, 1); } preempt_enable(); } diff --git a/arch/i386/kernel/e820.c b/arch/i386/kernel/e820.c index f391abcf7da..70f39560846 100644 --- a/arch/i386/kernel/e820.c +++ b/arch/i386/kernel/e820.c @@ -14,6 +14,7 @@ #include <asm/pgtable.h> #include <asm/page.h> #include <asm/e820.h> +#include <asm/setup.h> #ifdef CONFIG_EFI int efi_enabled = 0; @@ -156,21 +157,22 @@ static struct resource standard_io_resources[] = { { .flags = IORESOURCE_BUSY | IORESOURCE_IO } }; -static int romsignature(const unsigned char *x) +#define ROMSIGNATURE 0xaa55 + +static int __init romsignature(const unsigned char *rom) { unsigned short sig; - int ret = 0; - if (probe_kernel_address((const unsigned short *)x, sig) == 0) - ret = (sig == 0xaa55); - return ret; + + return probe_kernel_address((const unsigned short *)rom, sig) == 0 && + sig == ROMSIGNATURE; } static int __init romchecksum(unsigned char *rom, unsigned long length) { - unsigned char *p, sum = 0; + unsigned char sum; - for (p = rom; p < rom + length; p++) - sum += *p; + for (sum = 0; length; length--) + sum += *rom++; return sum == 0; } diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S index 5e47683fc63..18bddcb8e9e 100644 --- a/arch/i386/kernel/entry.S +++ b/arch/i386/kernel/entry.S @@ -30,7 +30,7 @@ * 18(%esp) - %eax * 1C(%esp) - %ds * 20(%esp) - %es - * 24(%esp) - %gs + * 24(%esp) - %fs * 28(%esp) - orig_eax * 2C(%esp) - %eip * 30(%esp) - %cs @@ -99,9 +99,9 @@ VM_MASK = 0x00020000 #define SAVE_ALL \ cld; \ - pushl %gs; \ + pushl %fs; \ CFI_ADJUST_CFA_OFFSET 4;\ - /*CFI_REL_OFFSET gs, 0;*/\ + /*CFI_REL_OFFSET fs, 0;*/\ pushl %es; \ CFI_ADJUST_CFA_OFFSET 4;\ /*CFI_REL_OFFSET es, 0;*/\ @@ -133,7 +133,7 @@ VM_MASK = 0x00020000 movl %edx, %ds; \ movl %edx, %es; \ movl $(__KERNEL_PDA), %edx; \ - movl %edx, %gs + movl %edx, %fs #define RESTORE_INT_REGS \ popl %ebx; \ @@ -166,9 +166,9 @@ VM_MASK = 0x00020000 2: popl %es; \ CFI_ADJUST_CFA_OFFSET -4;\ /*CFI_RESTORE es;*/\ -3: popl %gs; \ +3: popl %fs; \ CFI_ADJUST_CFA_OFFSET -4;\ - /*CFI_RESTORE gs;*/\ + /*CFI_RESTORE fs;*/\ .pushsection .fixup,"ax"; \ 4: movl $0,(%esp); \ jmp 1b; \ @@ -227,6 +227,7 @@ ENTRY(ret_from_fork) CFI_ADJUST_CFA_OFFSET -4 jmp syscall_exit CFI_ENDPROC +END(ret_from_fork) /* * Return to user mode is not as complex as all this looks, @@ -258,6 +259,7 @@ ENTRY(resume_userspace) # int/exception return? jne work_pending jmp restore_all +END(ret_from_exception) #ifdef CONFIG_PREEMPT ENTRY(resume_kernel) @@ -272,6 +274,7 @@ need_resched: jz restore_all call preempt_schedule_irq jmp need_resched +END(resume_kernel) #endif CFI_ENDPROC @@ -349,16 +352,17 @@ sysenter_past_esp: movl PT_OLDESP(%esp), %ecx xorl %ebp,%ebp TRACE_IRQS_ON -1: mov PT_GS(%esp), %gs +1: mov PT_FS(%esp), %fs ENABLE_INTERRUPTS_SYSEXIT CFI_ENDPROC .pushsection .fixup,"ax" -2: movl $0,PT_GS(%esp) +2: movl $0,PT_FS(%esp) jmp 1b .section __ex_table,"a" .align 4 .long 1b,2b .popsection +ENDPROC(sysenter_entry) # system call handler stub ENTRY(system_call) @@ -459,6 +463,7 @@ ldt_ss: CFI_ADJUST_CFA_OFFSET -8 jmp restore_nocheck CFI_ENDPROC +ENDPROC(system_call) # perform work that needs to be done immediately before resumption ALIGN @@ -504,6 +509,7 @@ work_notifysig_v86: xorl %edx, %edx call do_notify_resume jmp resume_userspace_sig +END(work_pending) # perform syscall exit tracing ALIGN @@ -519,6 +525,7 @@ syscall_trace_entry: cmpl $(nr_syscalls), %eax jnae syscall_call jmp syscall_exit +END(syscall_trace_entry) # perform syscall exit tracing ALIGN @@ -532,6 +539,7 @@ syscall_exit_work: movl $1, %edx call do_syscall_trace jmp resume_userspace +END(syscall_exit_work) CFI_ENDPROC RING0_INT_FRAME # can't unwind into user space anyway @@ -542,15 +550,17 @@ syscall_fault: GET_THREAD_INFO(%ebp) movl $-EFAULT,PT_EAX(%esp) jmp resume_userspace +END(syscall_fault) syscall_badsys: movl $-ENOSYS,PT_EAX(%esp) jmp resume_userspace +END(syscall_badsys) CFI_ENDPROC #define FIXUP_ESPFIX_STACK \ /* since we are on a wrong stack, we cant make it a C code :( */ \ - movl %gs:PDA_cpu, %ebx; \ + movl %fs:PDA_cpu, %ebx; \ PER_CPU(cpu_gdt_descr, %ebx); \ movl GDS_address(%ebx), %ebx; \ GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah); \ @@ -581,9 +591,9 @@ syscall_badsys: ENTRY(interrupt) .text -vector=0 ENTRY(irq_entries_start) RING0_INT_FRAME +vector=0 .rept NR_IRQS ALIGN .if vector @@ -592,11 +602,16 @@ ENTRY(irq_entries_start) 1: pushl $~(vector) CFI_ADJUST_CFA_OFFSET 4 jmp common_interrupt -.data + .previous .long 1b -.text + .text vector=vector+1 .endr +END(irq_entries_start) + +.previous +END(interrupt) +.previous /* * the CPU automatically disables interrupts when executing an IRQ vector, @@ -609,6 +624,7 @@ common_interrupt: movl %esp,%eax call do_IRQ jmp ret_from_intr +ENDPROC(common_interrupt) CFI_ENDPROC #define BUILD_INTERRUPT(name, nr) \ @@ -621,18 +637,24 @@ ENTRY(name) \ movl %esp,%eax; \ call smp_/**/name; \ jmp ret_from_intr; \ - CFI_ENDPROC + CFI_ENDPROC; \ +ENDPROC(name) /* The include is where all of the SMP etc. interrupts come from */ #include "entry_arch.h" +/* This alternate entry is needed because we hijack the apic LVTT */ +#if defined(CONFIG_VMI) && defined(CONFIG_X86_LOCAL_APIC) +BUILD_INTERRUPT(apic_vmi_timer_interrupt,LOCAL_TIMER_VECTOR) +#endif + KPROBE_ENTRY(page_fault) RING0_EC_FRAME pushl $do_page_fault CFI_ADJUST_CFA_OFFSET 4 ALIGN error_code: - /* the function address is in %gs's slot on the stack */ + /* the function address is in %fs's slot on the stack */ pushl %es CFI_ADJUST_CFA_OFFSET 4 /*CFI_REL_OFFSET es, 0*/ @@ -661,20 +683,20 @@ error_code: CFI_ADJUST_CFA_OFFSET 4 CFI_REL_OFFSET ebx, 0 cld - pushl %gs + pushl %fs CFI_ADJUST_CFA_OFFSET 4 - /*CFI_REL_OFFSET gs, 0*/ + /*CFI_REL_OFFSET fs, 0*/ movl $(__KERNEL_PDA), %ecx - movl %ecx, %gs + movl %ecx, %fs UNWIND_ESPFIX_STACK popl %ecx CFI_ADJUST_CFA_OFFSET -4 /*CFI_REGISTER es, ecx*/ - movl PT_GS(%esp), %edi # get the function address + movl PT_FS(%esp), %edi # get the function address movl PT_ORIG_EAX(%esp), %edx # get the error code movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart - mov %ecx, PT_GS(%esp) - /*CFI_REL_OFFSET gs, ES*/ + mov %ecx, PT_FS(%esp) + /*CFI_REL_OFFSET fs, ES*/ movl $(__USER_DS), %ecx movl %ecx, %ds movl %ecx, %es @@ -692,6 +714,7 @@ ENTRY(coprocessor_error) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(coprocessor_error) ENTRY(simd_coprocessor_error) RING0_INT_FRAME @@ -701,6 +724,7 @@ ENTRY(simd_coprocessor_error) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(simd_coprocessor_error) ENTRY(device_not_available) RING0_INT_FRAME @@ -721,6 +745,7 @@ device_not_available_emulate: CFI_ADJUST_CFA_OFFSET -4 jmp ret_from_exception CFI_ENDPROC +END(device_not_available) /* * Debug traps and NMI can happen at the one SYSENTER instruction @@ -864,10 +889,12 @@ ENTRY(native_iret) .align 4 .long 1b,iret_exc .previous +END(native_iret) ENTRY(native_irq_enable_sysexit) sti sysexit +END(native_irq_enable_sysexit) #endif KPROBE_ENTRY(int3) @@ -890,6 +917,7 @@ ENTRY(overflow) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(overflow) ENTRY(bounds) RING0_INT_FRAME @@ -899,6 +927,7 @@ ENTRY(bounds) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(bounds) ENTRY(invalid_op) RING0_INT_FRAME @@ -908,6 +937,7 @@ ENTRY(invalid_op) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(invalid_op) ENTRY(coprocessor_segment_overrun) RING0_INT_FRAME @@ -917,6 +947,7 @@ ENTRY(coprocessor_segment_overrun) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(coprocessor_segment_overrun) ENTRY(invalid_TSS) RING0_EC_FRAME @@ -924,6 +955,7 @@ ENTRY(invalid_TSS) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(invalid_TSS) ENTRY(segment_not_present) RING0_EC_FRAME @@ -931,6 +963,7 @@ ENTRY(segment_not_present) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(segment_not_present) ENTRY(stack_segment) RING0_EC_FRAME @@ -938,6 +971,7 @@ ENTRY(stack_segment) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(stack_segment) KPROBE_ENTRY(general_protection) RING0_EC_FRAME @@ -953,6 +987,7 @@ ENTRY(alignment_check) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(alignment_check) ENTRY(divide_error) RING0_INT_FRAME @@ -962,6 +997,7 @@ ENTRY(divide_error) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(divide_error) #ifdef CONFIG_X86_MCE ENTRY(machine_check) @@ -972,6 +1008,7 @@ ENTRY(machine_check) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(machine_check) #endif ENTRY(spurious_interrupt_bug) @@ -982,6 +1019,7 @@ ENTRY(spurious_interrupt_bug) CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC +END(spurious_interrupt_bug) ENTRY(kernel_thread_helper) pushl $0 # fake return address for unwinder diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index cb9abdfced9..3fa7f9389af 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -53,6 +53,7 @@ * any particular GDT layout, because we load our own as soon as we * can. */ +.section .text.head,"ax",@progbits ENTRY(startup_32) #ifdef CONFIG_PARAVIRT @@ -141,16 +142,25 @@ page_pde_offset = (__PAGE_OFFSET >> 20); jb 10b movl %edi,(init_pg_tables_end - __PAGE_OFFSET) -#ifdef CONFIG_SMP xorl %ebx,%ebx /* This is the boot CPU (BSP) */ jmp 3f - /* * Non-boot CPU entry point; entered from trampoline.S * We can't lgdt here, because lgdt itself uses a data segment, but * we know the trampoline has already loaded the boot_gdt_table GDT * for us. + * + * If cpu hotplug is not supported then this code can go in init section + * which will be freed later */ + +#ifdef CONFIG_HOTPLUG_CPU +.section .text,"ax",@progbits +#else +.section .init.text,"ax",@progbits +#endif + +#ifdef CONFIG_SMP ENTRY(startup_32_smp) cld movl $(__BOOT_DS),%eax @@ -208,8 +218,8 @@ ENTRY(startup_32_smp) xorl %ebx,%ebx incl %ebx -3: #endif /* CONFIG_SMP */ +3: /* * Enable paging @@ -309,7 +319,7 @@ is386: movl $2,%ecx # set MP call check_x87 call setup_pda - lgdt cpu_gdt_descr + lgdt early_gdt_descr lidt idt_descr ljmp $(__KERNEL_CS),$1f 1: movl $(__KERNEL_DS),%eax # reload all the segment registers @@ -319,12 +329,12 @@ is386: movl $2,%ecx # set MP movl %eax,%ds movl %eax,%es - xorl %eax,%eax # Clear FS and LDT - movl %eax,%fs + xorl %eax,%eax # Clear GS and LDT + movl %eax,%gs lldt %ax movl $(__KERNEL_PDA),%eax - mov %eax,%gs + mov %eax,%fs cld # gcc2 wants the direction flag cleared at all times pushl $0 # fake return address for unwinder @@ -360,12 +370,12 @@ check_x87: * cpu_gdt_table and boot_pda; for secondary CPUs, these will be * that CPU's GDT and PDA. */ -setup_pda: +ENTRY(setup_pda) /* get the PDA pointer */ movl start_pda, %eax /* slot the PDA address into the GDT */ - mov cpu_gdt_descr+2, %ecx + mov early_gdt_descr+2, %ecx mov %ax, (__KERNEL_PDA+0+2)(%ecx) /* base & 0x0000ffff */ shr $16, %eax mov %al, (__KERNEL_PDA+4+0)(%ecx) /* base & 0x00ff0000 */ @@ -492,6 +502,7 @@ ignore_int: #endif iret +.section .text #ifdef CONFIG_PARAVIRT startup_paravirt: cld @@ -502,10 +513,11 @@ startup_paravirt: pushl %ecx pushl %eax - /* paravirt.o is last in link, and that probe fn never returns */ pushl $__start_paravirtprobe 1: movl 0(%esp), %eax + cmpl $__stop_paravirtprobe, %eax + je unhandled_paravirt pushl (%eax) movl 8(%esp), %eax call *(%esp) @@ -517,6 +529,10 @@ startup_paravirt: addl $4, (%esp) jmp 1b + +unhandled_paravirt: + /* Nothing wanted us: we're screwed. */ + ud2 #endif /* @@ -581,7 +597,7 @@ idt_descr: # boot GDT descriptor (later on used by CPU#0): .word 0 # 32 bit align gdt_desc.address -ENTRY(cpu_gdt_descr) +ENTRY(early_gdt_descr) .word GDT_ENTRIES*8-1 .long cpu_gdt_table diff --git a/arch/i386/kernel/hpet.c b/arch/i386/kernel/hpet.c index 0b29d41322a..e1006b7acc9 100644 --- a/arch/i386/kernel/hpet.c +++ b/arch/i386/kernel/hpet.c @@ -1,4 +1,5 @@ #include <linux/clocksource.h> +#include <linux/clockchips.h> #include <linux/errno.h> #include <linux/hpet.h> #include <linux/init.h> @@ -6,17 +7,278 @@ #include <asm/hpet.h> #include <asm/io.h> +extern struct clock_event_device *global_clock_event; + #define HPET_MASK CLOCKSOURCE_MASK(32) #define HPET_SHIFT 22 /* FSEC = 10^-15 NSEC = 10^-9 */ #define FSEC_PER_NSEC 1000000 -static void __iomem *hpet_ptr; +/* + * HPET address is set in acpi/boot.c, when an ACPI entry exists + */ +unsigned long hpet_address; +static void __iomem * hpet_virt_address; + +static inline unsigned long hpet_readl(unsigned long a) +{ + return readl(hpet_virt_address + a); +} + +static inline void hpet_writel(unsigned long d, unsigned long a) +{ + writel(d, hpet_virt_address + a); +} + +/* + * HPET command line enable / disable + */ +static int boot_hpet_disable; + +static int __init hpet_setup(char* str) +{ + if (str) { + if (!strncmp("disable", str, 7)) + boot_hpet_disable = 1; + } + return 1; +} +__setup("hpet=", hpet_setup); + +static inline int is_hpet_capable(void) +{ + return (!boot_hpet_disable && hpet_address); +} + +/* + * HPET timer interrupt enable / disable + */ +static int hpet_legacy_int_enabled; + +/** + * is_hpet_enabled - check whether the hpet timer interrupt is enabled + */ +int is_hpet_enabled(void) +{ + return is_hpet_capable() && hpet_legacy_int_enabled; +} + +/* + * When the hpet driver (/dev/hpet) is enabled, we need to reserve + * timer 0 and timer 1 in case of RTC emulation. + */ +#ifdef CONFIG_HPET +static void hpet_reserve_platform_timers(unsigned long id) +{ + struct hpet __iomem *hpet = hpet_virt_address; + struct hpet_timer __iomem *timer = &hpet->hpet_timers[2]; + unsigned int nrtimers, i; + struct hpet_data hd; + + nrtimers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1; + + memset(&hd, 0, sizeof (hd)); + hd.hd_phys_address = hpet_address; + hd.hd_address = hpet_virt_address; + hd.hd_nirqs = nrtimers; + hd.hd_flags = HPET_DATA_PLATFORM; + hpet_reserve_timer(&hd, 0); + +#ifdef CONFIG_HPET_EMULATE_RTC + hpet_reserve_timer(&hd, 1); +#endif + + hd.hd_irq[0] = HPET_LEGACY_8254; + hd.hd_irq[1] = HPET_LEGACY_RTC; + + for (i = 2; i < nrtimers; timer++, i++) + hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >> + Tn_INT_ROUTE_CNF_SHIFT; + + hpet_alloc(&hd); + +} +#else +static void hpet_reserve_platform_timers(unsigned long id) { } +#endif + +/* + * Common hpet info + */ +static unsigned long hpet_period; + +static void hpet_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt); +static int hpet_next_event(unsigned long delta, + struct clock_event_device *evt); + +/* + * The hpet clock event device + */ +static struct clock_event_device hpet_clockevent = { + .name = "hpet", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = hpet_set_mode, + .set_next_event = hpet_next_event, + .shift = 32, + .irq = 0, +}; + +static void hpet_start_counter(void) +{ + unsigned long cfg = hpet_readl(HPET_CFG); + + cfg &= ~HPET_CFG_ENABLE; + hpet_writel(cfg, HPET_CFG); + hpet_writel(0, HPET_COUNTER); + hpet_writel(0, HPET_COUNTER + 4); + cfg |= HPET_CFG_ENABLE; + hpet_writel(cfg, HPET_CFG); +} + +static void hpet_enable_int(void) +{ + unsigned long cfg = hpet_readl(HPET_CFG); + + cfg |= HPET_CFG_LEGACY; + hpet_writel(cfg, HPET_CFG); + hpet_legacy_int_enabled = 1; +} + +static void hpet_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long cfg, cmp, now; + uint64_t delta; + + switch(mode) { + case CLOCK_EVT_MODE_PERIODIC: + delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * hpet_clockevent.mult; + delta >>= hpet_clockevent.shift; + now = hpet_readl(HPET_COUNTER); + cmp = now + (unsigned long) delta; + cfg = hpet_readl(HPET_T0_CFG); + cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | + HPET_TN_SETVAL | HPET_TN_32BIT; + hpet_writel(cfg, HPET_T0_CFG); + /* + * The first write after writing TN_SETVAL to the + * config register sets the counter value, the second + * write sets the period. + */ + hpet_writel(cmp, HPET_T0_CMP); + udelay(1); + hpet_writel((unsigned long) delta, HPET_T0_CMP); + break; + + case CLOCK_EVT_MODE_ONESHOT: + cfg = hpet_readl(HPET_T0_CFG); + cfg &= ~HPET_TN_PERIODIC; + cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; + hpet_writel(cfg, HPET_T0_CFG); + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + cfg = hpet_readl(HPET_T0_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_writel(cfg, HPET_T0_CFG); + break; + } +} + +static int hpet_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + unsigned long cnt; + + cnt = hpet_readl(HPET_COUNTER); + cnt += delta; + hpet_writel(cnt, HPET_T0_CMP); + + return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0); +} + +/* + * Try to setup the HPET timer + */ +int __init hpet_enable(void) +{ + unsigned long id; + uint64_t hpet_freq; + + if (!is_hpet_capable()) + return 0; + + hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); + + /* + * Read the period and check for a sane value: + */ + hpet_period = hpet_readl(HPET_PERIOD); + if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD) + goto out_nohpet; + + /* + * The period is a femto seconds value. We need to calculate the + * scaled math multiplication factor for nanosecond to hpet tick + * conversion. + */ + hpet_freq = 1000000000000000ULL; + do_div(hpet_freq, hpet_period); + hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, + NSEC_PER_SEC, 32); + /* Calculate the min / max delta */ + hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, + &hpet_clockevent); + hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30, + &hpet_clockevent); + + /* + * Read the HPET ID register to retrieve the IRQ routing + * information and the number of channels + */ + id = hpet_readl(HPET_ID); + +#ifdef CONFIG_HPET_EMULATE_RTC + /* + * The legacy routing mode needs at least two channels, tick timer + * and the rtc emulation channel. + */ + if (!(id & HPET_ID_NUMBER)) + goto out_nohpet; +#endif + + /* Start the counter */ + hpet_start_counter(); + + if (id & HPET_ID_LEGSUP) { + hpet_enable_int(); + hpet_reserve_platform_timers(id); + /* + * Start hpet with the boot cpu mask and make it + * global after the IO_APIC has been initialized. + */ + hpet_clockevent.cpumask =cpumask_of_cpu(0); + clockevents_register_device(&hpet_clockevent); + global_clock_event = &hpet_clockevent; + return 1; + } + return 0; +out_nohpet: + iounmap(hpet_virt_address); + hpet_virt_address = NULL; + return 0; +} + +/* + * Clock source related code + */ static cycle_t read_hpet(void) { - return (cycle_t)readl(hpet_ptr); + return (cycle_t)hpet_readl(HPET_COUNTER); } static struct clocksource clocksource_hpet = { @@ -24,28 +286,17 @@ static struct clocksource clocksource_hpet = { .rating = 250, .read = read_hpet, .mask = HPET_MASK, - .mult = 0, /* set below */ .shift = HPET_SHIFT, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static int __init init_hpet_clocksource(void) { - unsigned long hpet_period; - void __iomem* hpet_base; u64 tmp; - int err; - if (!is_hpet_enabled()) + if (!hpet_virt_address) return -ENODEV; - /* calculate the hpet address: */ - hpet_base = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); - hpet_ptr = hpet_base + HPET_COUNTER; - - /* calculate the frequency: */ - hpet_period = readl(hpet_base + HPET_PERIOD); - /* * hpet period is in femto seconds per cycle * so we need to convert this to ns/cyc units @@ -61,11 +312,218 @@ static int __init init_hpet_clocksource(void) do_div(tmp, FSEC_PER_NSEC); clocksource_hpet.mult = (u32)tmp; - err = clocksource_register(&clocksource_hpet); - if (err) - iounmap(hpet_base); - - return err; + return clocksource_register(&clocksource_hpet); } module_init(init_hpet_clocksource); + +#ifdef CONFIG_HPET_EMULATE_RTC + +/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET + * is enabled, we support RTC interrupt functionality in software. + * RTC has 3 kinds of interrupts: + * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock + * is updated + * 2) Alarm Interrupt - generate an interrupt at a specific time of day + * 3) Periodic Interrupt - generate periodic interrupt, with frequencies + * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2) + * (1) and (2) above are implemented using polling at a frequency of + * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt + * overhead. (DEFAULT_RTC_INT_FREQ) + * For (3), we use interrupts at 64Hz or user specified periodic + * frequency, whichever is higher. + */ +#include <linux/mc146818rtc.h> +#include <linux/rtc.h> + +#define DEFAULT_RTC_INT_FREQ 64 +#define DEFAULT_RTC_SHIFT 6 +#define RTC_NUM_INTS 1 + +static unsigned long hpet_rtc_flags; +static unsigned long hpet_prev_update_sec; +static struct rtc_time hpet_alarm_time; +static unsigned long hpet_pie_count; +static unsigned long hpet_t1_cmp; +static unsigned long hpet_default_delta; +static unsigned long hpet_pie_delta; +static unsigned long hpet_pie_limit; + +/* + * Timer 1 for RTC emulation. We use one shot mode, as periodic mode + * is not supported by all HPET implementations for timer 1. + * + * hpet_rtc_timer_init() is called when the rtc is initialized. + */ +int hpet_rtc_timer_init(void) +{ + unsigned long cfg, cnt, delta, flags; + + if (!is_hpet_enabled()) + return 0; + + if (!hpet_default_delta) { + uint64_t clc; + + clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; + clc >>= hpet_clockevent.shift + DEFAULT_RTC_SHIFT; + hpet_default_delta = (unsigned long) clc; + } + + if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) + delta = hpet_default_delta; + else + delta = hpet_pie_delta; + + local_irq_save(flags); + + cnt = delta + hpet_readl(HPET_COUNTER); + hpet_writel(cnt, HPET_T1_CMP); + hpet_t1_cmp = cnt; + + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_PERIODIC; + cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; + hpet_writel(cfg, HPET_T1_CFG); + + local_irq_restore(flags); + + return 1; +} + +/* + * The functions below are called from rtc driver. + * Return 0 if HPET is not being used. + * Otherwise do the necessary changes and return 1. + */ +int hpet_mask_rtc_irq_bit(unsigned long bit_mask) +{ + if (!is_hpet_enabled()) + return 0; + + hpet_rtc_flags &= ~bit_mask; + return 1; +} + +int hpet_set_rtc_irq_bit(unsigned long bit_mask) +{ + unsigned long oldbits = hpet_rtc_flags; + + if (!is_hpet_enabled()) + return 0; + + hpet_rtc_flags |= bit_mask; + + if (!oldbits) + hpet_rtc_timer_init(); + + return 1; +} + +int hpet_set_alarm_time(unsigned char hrs, unsigned char min, + unsigned char sec) +{ + if (!is_hpet_enabled()) + return 0; + + hpet_alarm_time.tm_hour = hrs; + hpet_alarm_time.tm_min = min; + hpet_alarm_time.tm_sec = sec; + + return 1; +} + +int hpet_set_periodic_freq(unsigned long freq) +{ + uint64_t clc; + + if (!is_hpet_enabled()) + return 0; + + if (freq <= DEFAULT_RTC_INT_FREQ) + hpet_pie_limit = DEFAULT_RTC_INT_FREQ / freq; + else { + clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; + do_div(clc, freq); + clc >>= hpet_clockevent.shift; + hpet_pie_delta = (unsigned long) clc; + } + return 1; +} + +int hpet_rtc_dropped_irq(void) +{ + return is_hpet_enabled(); +} + +static void hpet_rtc_timer_reinit(void) +{ + unsigned long cfg, delta; + int lost_ints = -1; + + if (unlikely(!hpet_rtc_flags)) { + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_writel(cfg, HPET_T1_CFG); + return; + } + + if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) + delta = hpet_default_delta; + else + delta = hpet_pie_delta; + + /* + * Increment the comparator value until we are ahead of the + * current count. + */ + do { + hpet_t1_cmp += delta; + hpet_writel(hpet_t1_cmp, HPET_T1_CMP); + lost_ints++; + } while ((long)(hpet_readl(HPET_COUNTER) - hpet_t1_cmp) > 0); + + if (lost_ints) { + if (hpet_rtc_flags & RTC_PIE) + hpet_pie_count += lost_ints; + if (printk_ratelimit()) + printk(KERN_WARNING "rtc: lost %d interrupts\n", + lost_ints); + } +} + +irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) +{ + struct rtc_time curr_time; + unsigned long rtc_int_flag = 0; + + hpet_rtc_timer_reinit(); + + if (hpet_rtc_flags & (RTC_UIE | RTC_AIE)) + rtc_get_rtc_time(&curr_time); + + if (hpet_rtc_flags & RTC_UIE && + curr_time.tm_sec != hpet_prev_update_sec) { + rtc_int_flag = RTC_UF; + hpet_prev_update_sec = curr_time.tm_sec; + } + + if (hpet_rtc_flags & RTC_PIE && + ++hpet_pie_count >= hpet_pie_limit) { + rtc_int_flag |= RTC_PF; + hpet_pie_count = 0; + } + + if (hpet_rtc_flags & RTC_PIE && + (curr_time.tm_sec == hpet_alarm_time.tm_sec) && + (curr_time.tm_min == hpet_alarm_time.tm_min) && + (curr_time.tm_hour == hpet_alarm_time.tm_hour)) + rtc_int_flag |= RTC_AF; + + if (rtc_int_flag) { + rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8)); + rtc_interrupt(rtc_int_flag, dev_id); + } + return IRQ_HANDLED; +} +#endif diff --git a/arch/i386/kernel/i8253.c b/arch/i386/kernel/i8253.c index 9a0060b92e3..a6bc7bb3883 100644 --- a/arch/i386/kernel/i8253.c +++ b/arch/i386/kernel/i8253.c @@ -2,7 +2,7 @@ * i8253.c 8253/PIT functions * */ -#include <linux/clocksource.h> +#include <linux/clockchips.h> #include <linux/spinlock.h> #include <linux/jiffies.h> #include <linux/sysdev.h> @@ -19,17 +19,97 @@ DEFINE_SPINLOCK(i8253_lock); EXPORT_SYMBOL(i8253_lock); -void setup_pit_timer(void) +/* + * HPET replaces the PIT, when enabled. So we need to know, which of + * the two timers is used + */ +struct clock_event_device *global_clock_event; + +/* + * Initialize the PIT timer. + * + * This is also called after resume to bring the PIT into operation again. + */ +static void init_pit_timer(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + + spin_lock_irqsave(&i8253_lock, flags); + + switch(mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* binary, mode 2, LSB/MSB, ch 0 */ + outb_p(0x34, PIT_MODE); + udelay(10); + outb_p(LATCH & 0xff , PIT_CH0); /* LSB */ + udelay(10); + outb(LATCH >> 8 , PIT_CH0); /* MSB */ + break; + + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + /* One shot setup */ + outb_p(0x38, PIT_MODE); + udelay(10); + break; + } + spin_unlock_irqrestore(&i8253_lock, flags); +} + +/* + * Program the next event in oneshot mode + * + * Delta is given in PIT ticks + */ +static int pit_next_event(unsigned long delta, struct clock_event_device *evt) { unsigned long flags; spin_lock_irqsave(&i8253_lock, flags); - outb_p(0x34,PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */ - udelay(10); - outb_p(LATCH & 0xff , PIT_CH0); /* LSB */ - udelay(10); - outb(LATCH >> 8 , PIT_CH0); /* MSB */ + outb_p(delta & 0xff , PIT_CH0); /* LSB */ + outb(delta >> 8 , PIT_CH0); /* MSB */ spin_unlock_irqrestore(&i8253_lock, flags); + + return 0; +} + +/* + * On UP the PIT can serve all of the possible timer functions. On SMP systems + * it can be solely used for the global tick. + * + * The profiling and update capabilites are switched off once the local apic is + * registered. This mechanism replaces the previous #ifdef LOCAL_APIC - + * !using_apic_timer decisions in do_timer_interrupt_hook() + */ +struct clock_event_device pit_clockevent = { + .name = "pit", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = init_pit_timer, + .set_next_event = pit_next_event, + .shift = 32, + .irq = 0, +}; + +/* + * Initialize the conversion factor and the min/max deltas of the clock event + * structure and register the clock event source with the framework. + */ +void __init setup_pit_timer(void) +{ + /* + * Start pit with the boot cpu mask and make it global after the + * IO_APIC has been initialized. + */ + pit_clockevent.cpumask = cpumask_of_cpu(0); + pit_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, 32); + pit_clockevent.max_delta_ns = + clockevent_delta2ns(0x7FFF, &pit_clockevent); + pit_clockevent.min_delta_ns = + clockevent_delta2ns(0xF, &pit_clockevent); + clockevents_register_device(&pit_clockevent); + global_clock_event = &pit_clockevent; } /* @@ -46,7 +126,7 @@ static cycle_t pit_read(void) static u32 old_jifs; spin_lock_irqsave(&i8253_lock, flags); - /* + /* * Although our caller may have the read side of xtime_lock, * this is now a seqlock, and we are cheating in this routine * by having side effects on state that we cannot undo if diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c index c8d45821c78..03abfdb1a6e 100644 --- a/arch/i386/kernel/i8259.c +++ b/arch/i386/kernel/i8259.c @@ -41,6 +41,7 @@ static void mask_and_ack_8259A(unsigned int); static struct irq_chip i8259A_chip = { .name = "XT-PIC", .mask = disable_8259A_irq, + .disable = disable_8259A_irq, .unmask = enable_8259A_irq, .mask_ack = mask_and_ack_8259A, }; @@ -410,12 +411,6 @@ void __init native_init_IRQ(void) intr_init_hook(); /* - * Set the clock to HZ Hz, we already have a valid - * vector now: - */ - setup_pit_timer(); - - /* * External FPU? Set up irq13 if so, for * original braindamaged IBM FERR coupling. */ diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index ba8d302a0b7..4ccebd454e2 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -482,8 +482,8 @@ static void do_irq_balance(void) package_index = CPU_TO_PACKAGEINDEX(i); for (j = 0; j < NR_IRQS; j++) { unsigned long value_now, delta; - /* Is this an active IRQ? */ - if (!irq_desc[j].action) + /* Is this an active IRQ or balancing disabled ? */ + if (!irq_desc[j].action || irq_balancing_disabled(j)) continue; if ( package_index == i ) IRQ_DELTA(package_index,j) = 0; @@ -1281,11 +1281,9 @@ static void ioapic_register_intr(int irq, int vector, unsigned long trigger) trigger == IOAPIC_LEVEL) set_irq_chip_and_handler_name(irq, &ioapic_chip, handle_fasteoi_irq, "fasteoi"); - else { - irq_desc[irq].status |= IRQ_DELAYED_DISABLE; + else set_irq_chip_and_handler_name(irq, &ioapic_chip, handle_edge_irq, "edge"); - } set_intr_gate(vector, interrupt[irq]); } @@ -1588,7 +1586,7 @@ void /*__init*/ print_local_APIC(void * dummy) v = apic_read(APIC_LVR); printk(KERN_INFO "... APIC VERSION: %08x\n", v); ver = GET_APIC_VERSION(v); - maxlvt = get_maxlvt(); + maxlvt = lapic_get_maxlvt(); v = apic_read(APIC_TASKPRI); printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK); @@ -1920,7 +1918,7 @@ static void __init setup_ioapic_ids_from_mpc(void) static void __init setup_ioapic_ids_from_mpc(void) { } #endif -static int no_timer_check __initdata; +int no_timer_check __initdata; static int __init notimercheck(char *s) { @@ -2310,7 +2308,7 @@ static inline void __init check_timer(void) disable_8259A_irq(0); set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq, - "fasteio"); + "fasteoi"); apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ enable_8259A_irq(0); diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c index 3201d421090..0f2ca590bf2 100644 --- a/arch/i386/kernel/irq.c +++ b/arch/i386/kernel/irq.c @@ -10,7 +10,6 @@ * io_apic.c.) */ -#include <asm/uaccess.h> #include <linux/module.h> #include <linux/seq_file.h> #include <linux/interrupt.h> @@ -19,19 +18,36 @@ #include <linux/cpu.h> #include <linux/delay.h> +#include <asm/idle.h> + +#include <asm/apic.h> +#include <asm/uaccess.h> + DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_internodealigned_in_smp; EXPORT_PER_CPU_SYMBOL(irq_stat); -#ifndef CONFIG_X86_LOCAL_APIC /* * 'what should we do if we get a hw irq event on an illegal vector'. * each architecture has to answer this themselves. */ void ack_bad_irq(unsigned int irq) { - printk("unexpected IRQ trap at vector %02x\n", irq); -} + printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq); + +#ifdef CONFIG_X86_LOCAL_APIC + /* + * Currently unexpected vectors happen only on SMP and APIC. + * We _must_ ack these because every local APIC has only N + * irq slots per priority level, and a 'hanging, unacked' IRQ + * holds up an irq slot - in excessive cases (when multiple + * unexpected vectors occur) that might lock up the APIC + * completely. + * But only ack when the APIC is enabled -AK + */ + if (cpu_has_apic) + ack_APIC_irq(); #endif +} #ifdef CONFIG_4KSTACKS /* @@ -61,6 +77,7 @@ fastcall unsigned int do_IRQ(struct pt_regs *regs) union irq_ctx *curctx, *irqctx; u32 *isp; #endif + exit_idle(); if (unlikely((unsigned)irq >= NR_IRQS)) { printk(KERN_EMERG "%s: cannot handle IRQ %d\n", diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index af1d5334499..b545bc746fc 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -363,7 +363,7 @@ no_kprobe: " pushf\n" /* skip cs, eip, orig_eax */ " subl $12, %esp\n" - " pushl %gs\n" + " pushl %fs\n" " pushl %ds\n" " pushl %es\n" " pushl %eax\n" @@ -387,7 +387,7 @@ no_kprobe: " popl %edi\n" " popl %ebp\n" " popl %eax\n" - /* skip eip, orig_eax, es, ds, gs */ + /* skip eip, orig_eax, es, ds, fs */ " addl $20, %esp\n" " popf\n" " ret\n"); @@ -408,7 +408,7 @@ fastcall void *__kprobes trampoline_handler(struct pt_regs *regs) spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); /* fixup registers */ - regs->xcs = __KERNEL_CS; + regs->xcs = __KERNEL_CS | get_kernel_rpl(); regs->eip = trampoline_address; regs->orig_eax = 0xffffffff; diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c index 381252bae3d..b8f16633a6e 100644 --- a/arch/i386/kernel/microcode.c +++ b/arch/i386/kernel/microcode.c @@ -384,7 +384,7 @@ static int do_microcode_update (void) { long cursor = 0; int error = 0; - void *new_mc; + void *new_mc = NULL; int cpu; cpumask_t old; diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c index 4e14264f392..bcaa6e9b619 100644 --- a/arch/i386/kernel/msr.c +++ b/arch/i386/kernel/msr.c @@ -68,7 +68,6 @@ static inline int rdmsr_eio(u32 reg, u32 *eax, u32 *edx) #ifdef CONFIG_SMP struct msr_command { - int cpu; int err; u32 reg; u32 data[2]; @@ -78,16 +77,14 @@ static void msr_smp_wrmsr(void *cmd_block) { struct msr_command *cmd = (struct msr_command *)cmd_block; - if (cmd->cpu == smp_processor_id()) - cmd->err = wrmsr_eio(cmd->reg, cmd->data[0], cmd->data[1]); + cmd->err = wrmsr_eio(cmd->reg, cmd->data[0], cmd->data[1]); } static void msr_smp_rdmsr(void *cmd_block) { struct msr_command *cmd = (struct msr_command *)cmd_block; - if (cmd->cpu == smp_processor_id()) - cmd->err = rdmsr_eio(cmd->reg, &cmd->data[0], &cmd->data[1]); + cmd->err = rdmsr_eio(cmd->reg, &cmd->data[0], &cmd->data[1]); } static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx) @@ -99,12 +96,11 @@ static inline int do_wrmsr(int cpu, u32 reg, u32 eax, u32 edx) if (cpu == smp_processor_id()) { ret = wrmsr_eio(reg, eax, edx); } else { - cmd.cpu = cpu; cmd.reg = reg; cmd.data[0] = eax; cmd.data[1] = edx; - smp_call_function(msr_smp_wrmsr, &cmd, 1, 1); + smp_call_function_single(cpu, msr_smp_wrmsr, &cmd, 1, 1); ret = cmd.err; } preempt_enable(); @@ -120,10 +116,9 @@ static inline int do_rdmsr(int cpu, u32 reg, u32 * eax, u32 * edx) if (cpu == smp_processor_id()) { ret = rdmsr_eio(reg, eax, edx); } else { - cmd.cpu = cpu; cmd.reg = reg; - smp_call_function(msr_smp_rdmsr, &cmd, 1, 1); + smp_call_function_single(cpu, msr_smp_rdmsr, &cmd, 1, 1); *eax = cmd.data[0]; *edx = cmd.data[1]; diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 1a6f8bb8881..821df34d2b3 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -23,6 +23,7 @@ #include <linux/dmi.h> #include <linux/kprobes.h> #include <linux/cpumask.h> +#include <linux/kernel_stat.h> #include <asm/smp.h> #include <asm/nmi.h> @@ -185,7 +186,8 @@ static __cpuinit inline int nmi_known_cpu(void) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: - return ((boot_cpu_data.x86 == 15) || (boot_cpu_data.x86 == 6)); + return ((boot_cpu_data.x86 == 15) || (boot_cpu_data.x86 == 6) + || (boot_cpu_data.x86 == 16)); case X86_VENDOR_INTEL: if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) return 1; @@ -216,6 +218,28 @@ static __init void nmi_cpu_busy(void *data) } #endif +static unsigned int adjust_for_32bit_ctr(unsigned int hz) +{ + u64 counter_val; + unsigned int retval = hz; + + /* + * On Intel CPUs with P6/ARCH_PERFMON only 32 bits in the counter + * are writable, with higher bits sign extending from bit 31. + * So, we can only program the counter with 31 bit values and + * 32nd bit should be 1, for 33.. to be 1. + * Find the appropriate nmi_hz + */ + counter_val = (u64)cpu_khz * 1000; + do_div(counter_val, retval); + if (counter_val > 0x7fffffffULL) { + u64 count = (u64)cpu_khz * 1000; + do_div(count, 0x7fffffffUL); + retval = count + 1; + } + return retval; +} + static int __init check_nmi_watchdog(void) { unsigned int *prev_nmi_count; @@ -281,18 +305,10 @@ static int __init check_nmi_watchdog(void) struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); nmi_hz = 1; - /* - * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter - * are writable, with higher bits sign extending from bit 31. - * So, we can only program the counter with 31 bit values and - * 32nd bit should be 1, for 33.. to be 1. - * Find the appropriate nmi_hz - */ - if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0 && - ((u64)cpu_khz * 1000) > 0x7fffffffULL) { - u64 count = (u64)cpu_khz * 1000; - do_div(count, 0x7fffffffUL); - nmi_hz = count + 1; + + if (wd->perfctr_msr == MSR_P6_PERFCTR0 || + wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) { + nmi_hz = adjust_for_32bit_ctr(nmi_hz); } } @@ -369,6 +385,34 @@ void enable_timer_nmi_watchdog(void) } } +static void __acpi_nmi_disable(void *__unused) +{ + apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); +} + +/* + * Disable timer based NMIs on all CPUs: + */ +void acpi_nmi_disable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); +} + +static void __acpi_nmi_enable(void *__unused) +{ + apic_write_around(APIC_LVT0, APIC_DM_NMI); +} + +/* + * Enable timer based NMIs on all CPUs: + */ +void acpi_nmi_enable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); +} + #ifdef CONFIG_PM static int nmi_pm_active; /* nmi_active before suspend */ @@ -442,6 +486,17 @@ static void write_watchdog_counter(unsigned int perfctr_msr, const char *descr) wrmsrl(perfctr_msr, 0 - count); } +static void write_watchdog_counter32(unsigned int perfctr_msr, + const char *descr) +{ + u64 count = (u64)cpu_khz * 1000; + + do_div(count, nmi_hz); + if(descr) + Dprintk("setting %s to -0x%08Lx\n", descr, count); + wrmsr(perfctr_msr, (u32)(-count), 0); +} + /* Note that these events don't tick when the CPU idles. This means the frequency varies with CPU load. */ @@ -531,7 +586,8 @@ static int setup_p6_watchdog(void) /* setup the timer */ wrmsr(evntsel_msr, evntsel, 0); - write_watchdog_counter(perfctr_msr, "P6_PERFCTR0"); + nmi_hz = adjust_for_32bit_ctr(nmi_hz); + write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0"); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= P6_EVNTSEL0_ENABLE; wrmsr(evntsel_msr, evntsel, 0); @@ -704,7 +760,8 @@ static int setup_intel_arch_watchdog(void) /* setup the timer */ wrmsr(evntsel_msr, evntsel, 0); - write_watchdog_counter(perfctr_msr, "INTEL_ARCH_PERFCTR0"); + nmi_hz = adjust_for_32bit_ctr(nmi_hz); + write_watchdog_counter32(perfctr_msr, "INTEL_ARCH_PERFCTR0"); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; wrmsr(evntsel_msr, evntsel, 0); @@ -762,7 +819,8 @@ void setup_apic_nmi_watchdog (void *unused) if (nmi_watchdog == NMI_LOCAL_APIC) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: - if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15) + if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15 && + boot_cpu_data.x86 != 16) return; if (!setup_k7_watchdog()) return; @@ -916,9 +974,13 @@ __kprobes int nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) cpu_clear(cpu, backtrace_mask); } - sum = per_cpu(irq_stat, cpu).apic_timer_irqs; + /* + * Take the local apic timer and PIT/HPET into account. We don't + * know which one is active, when we have highres/dyntick on + */ + sum = per_cpu(irq_stat, cpu).apic_timer_irqs + kstat_irqs(0); - /* if the apic timer isn't firing, this cpu isn't doing much */ + /* if the none of the timers isn't firing, this cpu isn't doing much */ if (!touched && last_irq_sums[cpu] == sum) { /* * Ayiee, looks like this CPU is stuck ... @@ -956,6 +1018,8 @@ __kprobes int nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) dummy &= ~P4_CCCR_OVF; wrmsrl(wd->cccr_msr, dummy); apic_write(APIC_LVTPC, APIC_DM_NMI); + /* start the cycle over again */ + write_watchdog_counter(wd->perfctr_msr, NULL); } else if (wd->perfctr_msr == MSR_P6_PERFCTR0 || wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) { @@ -964,9 +1028,12 @@ __kprobes int nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) * other P6 variant. * ArchPerfom/Core Duo also needs this */ apic_write(APIC_LVTPC, APIC_DM_NMI); + /* P6/ARCH_PERFMON has 32 bit counter write */ + write_watchdog_counter32(wd->perfctr_msr, NULL); + } else { + /* start the cycle over again */ + write_watchdog_counter(wd->perfctr_msr, NULL); } - /* start the cycle over again */ - write_watchdog_counter(wd->perfctr_msr, NULL); rc = 1; } else if (nmi_watchdog == NMI_IO_APIC) { /* don't know how to accurately check for this. diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c index e55fd05da0f..c156ecfa387 100644 --- a/arch/i386/kernel/paravirt.c +++ b/arch/i386/kernel/paravirt.c @@ -92,7 +92,7 @@ static unsigned native_patch(u8 type, u16 clobbers, void *insns, unsigned len) return insn_len; } -static fastcall unsigned long native_get_debugreg(int regno) +static unsigned long native_get_debugreg(int regno) { unsigned long val = 0; /* Damn you, gcc! */ @@ -115,7 +115,7 @@ static fastcall unsigned long native_get_debugreg(int regno) return val; } -static fastcall void native_set_debugreg(int regno, unsigned long value) +static void native_set_debugreg(int regno, unsigned long value) { switch (regno) { case 0: @@ -146,55 +146,55 @@ void init_IRQ(void) paravirt_ops.init_IRQ(); } -static fastcall void native_clts(void) +static void native_clts(void) { asm volatile ("clts"); } -static fastcall unsigned long native_read_cr0(void) +static unsigned long native_read_cr0(void) { unsigned long val; asm volatile("movl %%cr0,%0\n\t" :"=r" (val)); return val; } -static fastcall void native_write_cr0(unsigned long val) +static void native_write_cr0(unsigned long val) { asm volatile("movl %0,%%cr0": :"r" (val)); } -static fastcall unsigned long native_read_cr2(void) +static unsigned long native_read_cr2(void) { unsigned long val; asm volatile("movl %%cr2,%0\n\t" :"=r" (val)); return val; } -static fastcall void native_write_cr2(unsigned long val) +static void native_write_cr2(unsigned long val) { asm volatile("movl %0,%%cr2": :"r" (val)); } -static fastcall unsigned long native_read_cr3(void) +static unsigned long native_read_cr3(void) { unsigned long val; asm volatile("movl %%cr3,%0\n\t" :"=r" (val)); return val; } -static fastcall void native_write_cr3(unsigned long val) +static void native_write_cr3(unsigned long val) { asm volatile("movl %0,%%cr3": :"r" (val)); } -static fastcall unsigned long native_read_cr4(void) +static unsigned long native_read_cr4(void) { unsigned long val; asm volatile("movl %%cr4,%0\n\t" :"=r" (val)); return val; } -static fastcall unsigned long native_read_cr4_safe(void) +static unsigned long native_read_cr4_safe(void) { unsigned long val; /* This could fault if %cr4 does not exist */ @@ -207,51 +207,51 @@ static fastcall unsigned long native_read_cr4_safe(void) return val; } -static fastcall void native_write_cr4(unsigned long val) +static void native_write_cr4(unsigned long val) { asm volatile("movl %0,%%cr4": :"r" (val)); } -static fastcall unsigned long native_save_fl(void) +static unsigned long native_save_fl(void) { unsigned long f; asm volatile("pushfl ; popl %0":"=g" (f): /* no input */); return f; } -static fastcall void native_restore_fl(unsigned long f) +static void native_restore_fl(unsigned long f) { asm volatile("pushl %0 ; popfl": /* no output */ :"g" (f) :"memory", "cc"); } -static fastcall void native_irq_disable(void) +static void native_irq_disable(void) { asm volatile("cli": : :"memory"); } -static fastcall void native_irq_enable(void) +static void native_irq_enable(void) { asm volatile("sti": : :"memory"); } -static fastcall void native_safe_halt(void) +static void native_safe_halt(void) { asm volatile("sti; hlt": : :"memory"); } -static fastcall void native_halt(void) +static void native_halt(void) { asm volatile("hlt": : :"memory"); } -static fastcall void native_wbinvd(void) +static void native_wbinvd(void) { asm volatile("wbinvd": : :"memory"); } -static fastcall unsigned long long native_read_msr(unsigned int msr, int *err) +static unsigned long long native_read_msr(unsigned int msr, int *err) { unsigned long long val; @@ -270,7 +270,7 @@ static fastcall unsigned long long native_read_msr(unsigned int msr, int *err) return val; } -static fastcall int native_write_msr(unsigned int msr, unsigned long long val) +static int native_write_msr(unsigned int msr, unsigned long long val) { int err; asm volatile("2: wrmsr ; xorl %0,%0\n" @@ -288,53 +288,53 @@ static fastcall int native_write_msr(unsigned int msr, unsigned long long val) return err; } -static fastcall unsigned long long native_read_tsc(void) +static unsigned long long native_read_tsc(void) { unsigned long long val; asm volatile("rdtsc" : "=A" (val)); return val; } -static fastcall unsigned long long native_read_pmc(void) +static unsigned long long native_read_pmc(void) { unsigned long long val; asm volatile("rdpmc" : "=A" (val)); return val; } -static fastcall void native_load_tr_desc(void) +static void native_load_tr_desc(void) { asm volatile("ltr %w0"::"q" (GDT_ENTRY_TSS*8)); } -static fastcall void native_load_gdt(const struct Xgt_desc_struct *dtr) +static void native_load_gdt(const struct Xgt_desc_struct *dtr) { asm volatile("lgdt %0"::"m" (*dtr)); } -static fastcall void native_load_idt(const struct Xgt_desc_struct *dtr) +static void native_load_idt(const struct Xgt_desc_struct *dtr) { asm volatile("lidt %0"::"m" (*dtr)); } -static fastcall void native_store_gdt(struct Xgt_desc_struct *dtr) +static void native_store_gdt(struct Xgt_desc_struct *dtr) { asm ("sgdt %0":"=m" (*dtr)); } -static fastcall void native_store_idt(struct Xgt_desc_struct *dtr) +static void native_store_idt(struct Xgt_desc_struct *dtr) { asm ("sidt %0":"=m" (*dtr)); } -static fastcall unsigned long native_store_tr(void) +static unsigned long native_store_tr(void) { unsigned long tr; asm ("str %0":"=r" (tr)); return tr; } -static fastcall void native_load_tls(struct thread_struct *t, unsigned int cpu) +static void native_load_tls(struct thread_struct *t, unsigned int cpu) { #define C(i) get_cpu_gdt_table(cpu)[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i] C(0); C(1); C(2); @@ -348,22 +348,22 @@ static inline void native_write_dt_entry(void *dt, int entry, u32 entry_low, u32 lp[1] = entry_high; } -static fastcall void native_write_ldt_entry(void *dt, int entrynum, u32 low, u32 high) +static void native_write_ldt_entry(void *dt, int entrynum, u32 low, u32 high) { native_write_dt_entry(dt, entrynum, low, high); } -static fastcall void native_write_gdt_entry(void *dt, int entrynum, u32 low, u32 high) +static void native_write_gdt_entry(void *dt, int entrynum, u32 low, u32 high) { native_write_dt_entry(dt, entrynum, low, high); } -static fastcall void native_write_idt_entry(void *dt, int entrynum, u32 low, u32 high) +static void native_write_idt_entry(void *dt, int entrynum, u32 low, u32 high) { native_write_dt_entry(dt, entrynum, low, high); } -static fastcall void native_load_esp0(struct tss_struct *tss, +static void native_load_esp0(struct tss_struct *tss, struct thread_struct *thread) { tss->esp0 = thread->esp0; @@ -375,12 +375,12 @@ static fastcall void native_load_esp0(struct tss_struct *tss, } } -static fastcall void native_io_delay(void) +static void native_io_delay(void) { asm volatile("outb %al,$0x80"); } -static fastcall void native_flush_tlb(void) +static void native_flush_tlb(void) { __native_flush_tlb(); } @@ -389,49 +389,49 @@ static fastcall void native_flush_tlb(void) * Global pages have to be flushed a bit differently. Not a real * performance problem because this does not happen often. */ -static fastcall void native_flush_tlb_global(void) +static void native_flush_tlb_global(void) { __native_flush_tlb_global(); } -static fastcall void native_flush_tlb_single(u32 addr) +static void native_flush_tlb_single(u32 addr) { __native_flush_tlb_single(addr); } #ifndef CONFIG_X86_PAE -static fastcall void native_set_pte(pte_t *ptep, pte_t pteval) +static void native_set_pte(pte_t *ptep, pte_t pteval) { *ptep = pteval; } -static fastcall void native_set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pteval) +static void native_set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pteval) { *ptep = pteval; } -static fastcall void native_set_pmd(pmd_t *pmdp, pmd_t pmdval) +static void native_set_pmd(pmd_t *pmdp, pmd_t pmdval) { *pmdp = pmdval; } #else /* CONFIG_X86_PAE */ -static fastcall void native_set_pte(pte_t *ptep, pte_t pte) +static void native_set_pte(pte_t *ptep, pte_t pte) { ptep->pte_high = pte.pte_high; smp_wmb(); ptep->pte_low = pte.pte_low; } -static fastcall void native_set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pte) +static void native_set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pte) { ptep->pte_high = pte.pte_high; smp_wmb(); ptep->pte_low = pte.pte_low; } -static fastcall void native_set_pte_present(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) +static void native_set_pte_present(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) { ptep->pte_low = 0; smp_wmb(); @@ -440,29 +440,29 @@ static fastcall void native_set_pte_present(struct mm_struct *mm, unsigned long ptep->pte_low = pte.pte_low; } -static fastcall void native_set_pte_atomic(pte_t *ptep, pte_t pteval) +static void native_set_pte_atomic(pte_t *ptep, pte_t pteval) { set_64bit((unsigned long long *)ptep,pte_val(pteval)); } -static fastcall void native_set_pmd(pmd_t *pmdp, pmd_t pmdval) +static void native_set_pmd(pmd_t *pmdp, pmd_t pmdval) { set_64bit((unsigned long long *)pmdp,pmd_val(pmdval)); } -static fastcall void native_set_pud(pud_t *pudp, pud_t pudval) +static void native_set_pud(pud_t *pudp, pud_t pudval) { *pudp = pudval; } -static fastcall void native_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +static void native_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { ptep->pte_low = 0; smp_wmb(); ptep->pte_high = 0; } -static fastcall void native_pmd_clear(pmd_t *pmd) +static void native_pmd_clear(pmd_t *pmd) { u32 *tmp = (u32 *)pmd; *tmp = 0; @@ -472,8 +472,8 @@ static fastcall void native_pmd_clear(pmd_t *pmd) #endif /* CONFIG_X86_PAE */ /* These are in entry.S */ -extern fastcall void native_iret(void); -extern fastcall void native_irq_enable_sysexit(void); +extern void native_iret(void); +extern void native_irq_enable_sysexit(void); static int __init print_banner(void) { @@ -482,9 +482,6 @@ static int __init print_banner(void) } core_initcall(print_banner); -/* We simply declare start_kernel to be the paravirt probe of last resort. */ -paravirt_probe(start_kernel); - struct paravirt_ops paravirt_ops = { .name = "bare hardware", .paravirt_enabled = 0, @@ -544,12 +541,21 @@ struct paravirt_ops paravirt_ops = { .apic_write = native_apic_write, .apic_write_atomic = native_apic_write_atomic, .apic_read = native_apic_read, + .setup_boot_clock = setup_boot_APIC_clock, + .setup_secondary_clock = setup_secondary_APIC_clock, #endif + .set_lazy_mode = (void *)native_nop, .flush_tlb_user = native_flush_tlb, .flush_tlb_kernel = native_flush_tlb_global, .flush_tlb_single = native_flush_tlb_single, + .alloc_pt = (void *)native_nop, + .alloc_pd = (void *)native_nop, + .alloc_pd_clone = (void *)native_nop, + .release_pt = (void *)native_nop, + .release_pd = (void *)native_nop, + .set_pte = native_set_pte, .set_pte_at = native_set_pte_at, .set_pmd = native_set_pmd, @@ -565,6 +571,8 @@ struct paravirt_ops paravirt_ops = { .irq_enable_sysexit = native_irq_enable_sysexit, .iret = native_iret, + + .startup_ipi_hook = (void *)native_nop, }; /* diff --git a/arch/i386/kernel/pcspeaker.c b/arch/i386/kernel/pcspeaker.c new file mode 100644 index 00000000000..bc1f2d3ea27 --- /dev/null +++ b/arch/i386/kernel/pcspeaker.c @@ -0,0 +1,20 @@ +#include <linux/platform_device.h> +#include <linux/errno.h> +#include <linux/init.h> + +static __init int add_pcspkr(void) +{ + struct platform_device *pd; + int ret; + + pd = platform_device_alloc("pcspkr", -1); + if (!pd) + return -ENOMEM; + + ret = platform_device_add(pd); + if (ret) + platform_device_put(pd); + + return ret; +} +device_initcall(add_pcspkr); diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index c641056233a..bea304d48cd 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -38,6 +38,7 @@ #include <linux/ptrace.h> #include <linux/random.h> #include <linux/personality.h> +#include <linux/tick.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -48,6 +49,7 @@ #include <asm/i387.h> #include <asm/desc.h> #include <asm/vm86.h> +#include <asm/idle.h> #ifdef CONFIG_MATH_EMULATION #include <asm/math_emu.h> #endif @@ -80,6 +82,42 @@ void (*pm_idle)(void); EXPORT_SYMBOL(pm_idle); static DEFINE_PER_CPU(unsigned int, cpu_idle_state); +static ATOMIC_NOTIFIER_HEAD(idle_notifier); + +void idle_notifier_register(struct notifier_block *n) +{ + atomic_notifier_chain_register(&idle_notifier, n); +} + +void idle_notifier_unregister(struct notifier_block *n) +{ + atomic_notifier_chain_unregister(&idle_notifier, n); +} + +static DEFINE_PER_CPU(volatile unsigned long, idle_state); + +void enter_idle(void) +{ + /* needs to be atomic w.r.t. interrupts, not against other CPUs */ + __set_bit(0, &__get_cpu_var(idle_state)); + atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL); +} + +static void __exit_idle(void) +{ + /* needs to be atomic w.r.t. interrupts, not against other CPUs */ + if (__test_and_clear_bit(0, &__get_cpu_var(idle_state)) == 0) + return; + atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL); +} + +void exit_idle(void) +{ + if (current->pid) + return; + __exit_idle(); +} + void disable_hlt(void) { hlt_counter++; @@ -130,6 +168,7 @@ EXPORT_SYMBOL(default_idle); */ static void poll_idle (void) { + local_irq_enable(); cpu_relax(); } @@ -173,6 +212,7 @@ void cpu_idle(void) /* endless idle loop with no priority at all */ while (1) { + tick_nohz_stop_sched_tick(); while (!need_resched()) { void (*idle)(void); @@ -189,8 +229,18 @@ void cpu_idle(void) play_dead(); __get_cpu_var(irq_stat).idle_timestamp = jiffies; + + /* + * Idle routines should keep interrupts disabled + * from here on, until they go to idle. + * Otherwise, idle callbacks can misfire. + */ + local_irq_disable(); + enter_idle(); idle(); + __exit_idle(); } + tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); schedule(); preempt_disable(); @@ -243,7 +293,11 @@ void mwait_idle_with_hints(unsigned long eax, unsigned long ecx) __monitor((void *)¤t_thread_info()->flags, 0, 0); smp_mb(); if (!need_resched()) - __mwait(eax, ecx); + __sti_mwait(eax, ecx); + else + local_irq_enable(); + } else { + local_irq_enable(); } } @@ -308,8 +362,8 @@ void show_regs(struct pt_regs * regs) regs->eax,regs->ebx,regs->ecx,regs->edx); printk("ESI: %08lx EDI: %08lx EBP: %08lx", regs->esi, regs->edi, regs->ebp); - printk(" DS: %04x ES: %04x GS: %04x\n", - 0xffff & regs->xds,0xffff & regs->xes, 0xffff & regs->xgs); + printk(" DS: %04x ES: %04x FS: %04x\n", + 0xffff & regs->xds,0xffff & regs->xes, 0xffff & regs->xfs); cr0 = read_cr0(); cr2 = read_cr2(); @@ -340,7 +394,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) regs.xds = __USER_DS; regs.xes = __USER_DS; - regs.xgs = __KERNEL_PDA; + regs.xfs = __KERNEL_PDA; regs.orig_eax = -1; regs.eip = (unsigned long) kernel_thread_helper; regs.xcs = __KERNEL_CS | get_kernel_rpl(); @@ -425,7 +479,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long esp, p->thread.eip = (unsigned long) ret_from_fork; - savesegment(fs,p->thread.fs); + savesegment(gs,p->thread.gs); tsk = current; if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) { @@ -501,8 +555,8 @@ void dump_thread(struct pt_regs * regs, struct user * dump) dump->regs.eax = regs->eax; dump->regs.ds = regs->xds; dump->regs.es = regs->xes; - savesegment(fs,dump->regs.fs); - dump->regs.gs = regs->xgs; + dump->regs.fs = regs->xfs; + savesegment(gs,dump->regs.gs); dump->regs.orig_eax = regs->orig_eax; dump->regs.eip = regs->eip; dump->regs.cs = regs->xcs; @@ -653,7 +707,7 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas load_esp0(tss, next); /* - * Save away %fs. No need to save %gs, as it was saved on the + * Save away %gs. No need to save %fs, as it was saved on the * stack on entry. No need to save %es and %ds, as those are * always kernel segments while inside the kernel. Doing this * before setting the new TLS descriptors avoids the situation @@ -662,7 +716,7 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas * used %fs or %gs (it does not today), or if the kernel is * running inside of a hypervisor layer. */ - savesegment(fs, prev->fs); + savesegment(gs, prev->gs); /* * Load the per-thread Thread-Local Storage descriptor. @@ -670,14 +724,13 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas load_TLS(next, cpu); /* - * Restore %fs if needed. - * - * Glibc normally makes %fs be zero. + * Restore IOPL if needed. In normal use, the flags restore + * in the switch assembly will handle this. But if the kernel + * is running virtualized at a non-zero CPL, the popf will + * not restore flags, so it must be done in a separate step. */ - if (unlikely(prev->fs | next->fs)) - loadsegment(fs, next->fs); - - write_pda(pcurrent, next_p); + if (get_kernel_rpl() && unlikely(prev->iopl != next->iopl)) + set_iopl_mask(next->iopl); /* * Now maybe handle debug registers and/or IO bitmaps @@ -688,6 +741,15 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas disable_tsc(prev_p, next_p); + /* + * Leave lazy mode, flushing any hypercalls made here. + * This must be done before restoring TLS segments so + * the GDT and LDT are properly updated, and must be + * done before math_state_restore, so the TS bit is up + * to date. + */ + arch_leave_lazy_cpu_mode(); + /* If the task has used fpu the last 5 timeslices, just do a full * restore of the math state immediately to avoid the trap; the * chances of needing FPU soon are obviously high now @@ -695,6 +757,14 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas if (next_p->fpu_counter > 5) math_state_restore(); + /* + * Restore %gs if needed (which is common) + */ + if (prev->gs | next->gs) + loadsegment(gs, next->gs); + + write_pda(pcurrent, next_p); + return prev_p; } diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c index af8aabe8580..4a8f8a25972 100644 --- a/arch/i386/kernel/ptrace.c +++ b/arch/i386/kernel/ptrace.c @@ -89,14 +89,14 @@ static int putreg(struct task_struct *child, unsigned long regno, unsigned long value) { switch (regno >> 2) { - case FS: + case GS: if (value && (value & 3) != 3) return -EIO; - child->thread.fs = value; + child->thread.gs = value; return 0; case DS: case ES: - case GS: + case FS: if (value && (value & 3) != 3) return -EIO; value &= 0xffff; @@ -112,7 +112,7 @@ static int putreg(struct task_struct *child, value |= get_stack_long(child, EFL_OFFSET) & ~FLAG_MASK; break; } - if (regno > ES*4) + if (regno > FS*4) regno -= 1*4; put_stack_long(child, regno, value); return 0; @@ -124,18 +124,18 @@ static unsigned long getreg(struct task_struct *child, unsigned long retval = ~0UL; switch (regno >> 2) { - case FS: - retval = child->thread.fs; + case GS: + retval = child->thread.gs; break; case DS: case ES: - case GS: + case FS: case SS: case CS: retval = 0xffff; /* fall through */ default: - if (regno > ES*4) + if (regno > FS*4) regno -= 1*4; retval &= get_stack_long(child, regno); } diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 4694ac980cd..122623dcc6e 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -33,7 +33,6 @@ #include <linux/initrd.h> #include <linux/bootmem.h> #include <linux/seq_file.h> -#include <linux/platform_device.h> #include <linux/console.h> #include <linux/mca.h> #include <linux/root_dev.h> @@ -60,6 +59,7 @@ #include <asm/io_apic.h> #include <asm/ist.h> #include <asm/io.h> +#include <asm/vmi.h> #include <setup_arch.h> #include <bios_ebda.h> @@ -581,6 +581,14 @@ void __init setup_arch(char **cmdline_p) max_low_pfn = setup_memory(); +#ifdef CONFIG_VMI + /* + * Must be after max_low_pfn is determined, and before kernel + * pagetables are setup. + */ + vmi_init(); +#endif + /* * NOTE: before this point _nobody_ is allowed to allocate * any memory using the bootmem allocator. Although the @@ -651,28 +659,3 @@ void __init setup_arch(char **cmdline_p) #endif tsc_init(); } - -static __init int add_pcspkr(void) -{ - struct platform_device *pd; - int ret; - - pd = platform_device_alloc("pcspkr", -1); - if (!pd) - return -ENOMEM; - - ret = platform_device_add(pd); - if (ret) - platform_device_put(pd); - - return ret; -} -device_initcall(add_pcspkr); - -/* - * Local Variables: - * mode:c - * c-file-style:"k&r" - * c-basic-offset:8 - * End: - */ diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c index 65d7620eaa0..4f99e870c98 100644 --- a/arch/i386/kernel/signal.c +++ b/arch/i386/kernel/signal.c @@ -21,6 +21,7 @@ #include <linux/suspend.h> #include <linux/ptrace.h> #include <linux/elf.h> +#include <linux/binfmts.h> #include <asm/processor.h> #include <asm/ucontext.h> #include <asm/uaccess.h> @@ -128,8 +129,8 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *peax X86_EFLAGS_TF | X86_EFLAGS_SF | X86_EFLAGS_ZF | \ X86_EFLAGS_AF | X86_EFLAGS_PF | X86_EFLAGS_CF) - COPY_SEG(gs); - GET_SEG(fs); + GET_SEG(gs); + COPY_SEG(fs); COPY_SEG(es); COPY_SEG(ds); COPY(edi); @@ -244,9 +245,9 @@ setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate, { int tmp, err = 0; - err |= __put_user(regs->xgs, (unsigned int __user *)&sc->gs); - savesegment(fs, tmp); - err |= __put_user(tmp, (unsigned int __user *)&sc->fs); + err |= __put_user(regs->xfs, (unsigned int __user *)&sc->fs); + savesegment(gs, tmp); + err |= __put_user(tmp, (unsigned int __user *)&sc->gs); err |= __put_user(regs->xes, (unsigned int __user *)&sc->es); err |= __put_user(regs->xds, (unsigned int __user *)&sc->ds); @@ -349,7 +350,10 @@ static int setup_frame(int sig, struct k_sigaction *ka, goto give_sigsegv; } - restorer = (void *)VDSO_SYM(&__kernel_sigreturn); + if (current->binfmt->hasvdso) + restorer = (void *)VDSO_SYM(&__kernel_sigreturn); + else + restorer = (void *)&frame->retcode; if (ka->sa.sa_flags & SA_RESTORER) restorer = ka->sa.sa_restorer; diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c index 5285aff8367..9bd9637ae69 100644 --- a/arch/i386/kernel/smp.c +++ b/arch/i386/kernel/smp.c @@ -23,6 +23,7 @@ #include <asm/mtrr.h> #include <asm/tlbflush.h> +#include <asm/idle.h> #include <mach_apic.h> /* @@ -374,8 +375,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, /* * i'm not happy about this global shared spinlock in the * MM hot path, but we'll see how contended it is. - * Temporarily this turns IRQs off, so that lockups are - * detected by the NMI watchdog. + * AK: x86-64 has a faster method that could be ported. */ spin_lock(&tlbstate_lock); @@ -400,7 +400,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, while (!cpus_empty(flush_cpumask)) /* nothing. lockup detection does not belong here */ - mb(); + cpu_relax(); flush_mm = NULL; flush_va = 0; @@ -624,6 +624,7 @@ fastcall void smp_call_function_interrupt(struct pt_regs *regs) /* * At this point the info structure may be out of scope unless wait==1 */ + exit_idle(); irq_enter(); (*func)(info); irq_exit(); diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 8c6c8c52b95..48bfcaa13ec 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -63,6 +63,7 @@ #include <mach_apic.h> #include <mach_wakecpu.h> #include <smpboot_hooks.h> +#include <asm/vmi.h> /* Set if we find a B stepping CPU */ static int __devinitdata smp_b_stepping; @@ -93,12 +94,6 @@ cpumask_t cpu_possible_map; EXPORT_SYMBOL(cpu_possible_map); static cpumask_t smp_commenced_mask; -/* TSC's upper 32 bits can't be written in eariler CPU (before prescott), there - * is no way to resync one AP against BP. TBD: for prescott and above, we - * should use IA64's algorithm - */ -static int __devinitdata tsc_sync_disabled; - /* Per CPU bogomips and other parameters */ struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned; EXPORT_SYMBOL(cpu_data); @@ -215,151 +210,6 @@ valid_k7: ; } -/* - * TSC synchronization. - * - * We first check whether all CPUs have their TSC's synchronized, - * then we print a warning if not, and always resync. - */ - -static struct { - atomic_t start_flag; - atomic_t count_start; - atomic_t count_stop; - unsigned long long values[NR_CPUS]; -} tsc __cpuinitdata = { - .start_flag = ATOMIC_INIT(0), - .count_start = ATOMIC_INIT(0), - .count_stop = ATOMIC_INIT(0), -}; - -#define NR_LOOPS 5 - -static void __init synchronize_tsc_bp(void) -{ - int i; - unsigned long long t0; - unsigned long long sum, avg; - long long delta; - unsigned int one_usec; - int buggy = 0; - - printk(KERN_INFO "checking TSC synchronization across %u CPUs: ", num_booting_cpus()); - - /* convert from kcyc/sec to cyc/usec */ - one_usec = cpu_khz / 1000; - - atomic_set(&tsc.start_flag, 1); - wmb(); - - /* - * We loop a few times to get a primed instruction cache, - * then the last pass is more or less synchronized and - * the BP and APs set their cycle counters to zero all at - * once. This reduces the chance of having random offsets - * between the processors, and guarantees that the maximum - * delay between the cycle counters is never bigger than - * the latency of information-passing (cachelines) between - * two CPUs. - */ - for (i = 0; i < NR_LOOPS; i++) { - /* - * all APs synchronize but they loop on '== num_cpus' - */ - while (atomic_read(&tsc.count_start) != num_booting_cpus()-1) - cpu_relax(); - atomic_set(&tsc.count_stop, 0); - wmb(); - /* - * this lets the APs save their current TSC: - */ - atomic_inc(&tsc.count_start); - - rdtscll(tsc.values[smp_processor_id()]); - /* - * We clear the TSC in the last loop: - */ - if (i == NR_LOOPS-1) - write_tsc(0, 0); - - /* - * Wait for all APs to leave the synchronization point: - */ - while (atomic_read(&tsc.count_stop) != num_booting_cpus()-1) - cpu_relax(); - atomic_set(&tsc.count_start, 0); - wmb(); - atomic_inc(&tsc.count_stop); - } - - sum = 0; - for (i = 0; i < NR_CPUS; i++) { - if (cpu_isset(i, cpu_callout_map)) { - t0 = tsc.values[i]; - sum += t0; - } - } - avg = sum; - do_div(avg, num_booting_cpus()); - - for (i = 0; i < NR_CPUS; i++) { - if (!cpu_isset(i, cpu_callout_map)) - continue; - delta = tsc.values[i] - avg; - if (delta < 0) - delta = -delta; - /* - * We report bigger than 2 microseconds clock differences. - */ - if (delta > 2*one_usec) { - long long realdelta; - - if (!buggy) { - buggy = 1; - printk("\n"); - } - realdelta = delta; - do_div(realdelta, one_usec); - if (tsc.values[i] < avg) - realdelta = -realdelta; - - if (realdelta) - printk(KERN_INFO "CPU#%d had %Ld usecs TSC " - "skew, fixed it up.\n", i, realdelta); - } - } - if (!buggy) - printk("passed.\n"); -} - -static void __cpuinit synchronize_tsc_ap(void) -{ - int i; - - /* - * Not every cpu is online at the time - * this gets called, so we first wait for the BP to - * finish SMP initialization: - */ - while (!atomic_read(&tsc.start_flag)) - cpu_relax(); - - for (i = 0; i < NR_LOOPS; i++) { - atomic_inc(&tsc.count_start); - while (atomic_read(&tsc.count_start) != num_booting_cpus()) - cpu_relax(); - - rdtscll(tsc.values[smp_processor_id()]); - if (i == NR_LOOPS-1) - write_tsc(0, 0); - - atomic_inc(&tsc.count_stop); - while (atomic_read(&tsc.count_stop) != num_booting_cpus()) - cpu_relax(); - } -} -#undef NR_LOOPS - extern void calibrate_delay(void); static atomic_t init_deasserted; @@ -437,20 +287,12 @@ static void __cpuinit smp_callin(void) /* * Save our processor parameters */ - smp_store_cpu_info(cpuid); - - disable_APIC_timer(); + smp_store_cpu_info(cpuid); /* * Allow the master to continue. */ cpu_set(cpuid, cpu_callin_map); - - /* - * Synchronize the TSC with the BP - */ - if (cpu_has_tsc && cpu_khz && !tsc_sync_disabled) - synchronize_tsc_ap(); } static int cpucount; @@ -545,18 +387,25 @@ static void __cpuinit start_secondary(void *unused) * booting is too fragile that we want to limit the * things done here to the most necessary things. */ +#ifdef CONFIG_VMI + vmi_bringup(); +#endif secondary_cpu_init(); preempt_disable(); smp_callin(); while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) rep_nop(); - setup_secondary_APIC_clock(); + /* + * Check TSC synchronization with the BP: + */ + check_tsc_sync_target(); + + setup_secondary_clock(); if (nmi_watchdog == NMI_IO_APIC) { disable_8259A_irq(0); enable_NMI_through_LVT0(NULL); enable_8259A_irq(0); } - enable_APIC_timer(); /* * low-memory mappings have been cleared, flush them from * the local TLBs too. @@ -619,7 +468,6 @@ extern struct { unsigned short ss; } stack_start; extern struct i386_pda *start_pda; -extern struct Xgt_desc_struct cpu_gdt_descr; #ifdef CONFIG_NUMA @@ -749,7 +597,7 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip) /* * Due to the Pentium erratum 3AP. */ - maxlvt = get_maxlvt(); + maxlvt = lapic_get_maxlvt(); if (maxlvt > 3) { apic_read_around(APIC_SPIV); apic_write(APIC_ESR, 0); @@ -835,11 +683,18 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) num_starts = 0; /* + * Paravirt / VMI wants a startup IPI hook here to set up the + * target processor state. + */ + startup_ipi_hook(phys_apicid, (unsigned long) start_secondary, + (unsigned long) stack_start.esp); + + /* * Run STARTUP IPI loop. */ Dprintk("#startup loops: %d.\n", num_starts); - maxlvt = get_maxlvt(); + maxlvt = lapic_get_maxlvt(); for (j = 1; j <= num_starts; j++) { Dprintk("Sending STARTUP #%d.\n",j); @@ -1115,8 +970,6 @@ static int __cpuinit __smp_prepare_cpu(int cpu) info.cpu = cpu; INIT_WORK(&info.task, do_warm_boot_cpu); - tsc_sync_disabled = 1; - /* init low mem mapping */ clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS, min_t(unsigned long, KERNEL_PGD_PTRS, USER_PGD_PTRS)); @@ -1124,7 +977,6 @@ static int __cpuinit __smp_prepare_cpu(int cpu) schedule_work(&info.task); wait_for_completion(&done); - tsc_sync_disabled = 0; zap_low_mappings(); ret = 0; exit: @@ -1320,13 +1172,7 @@ static void __init smp_boot_cpus(unsigned int max_cpus) smpboot_setup_io_apic(); - setup_boot_APIC_clock(); - - /* - * Synchronize the TSC with the AP - */ - if (cpu_has_tsc && cpucount && cpu_khz) - synchronize_tsc_bp(); + setup_boot_clock(); } /* These are wrappers to interface to the new boot process. Someone @@ -1461,9 +1307,16 @@ int __cpuinit __cpu_up(unsigned int cpu) } local_irq_enable(); + per_cpu(cpu_state, cpu) = CPU_UP_PREPARE; /* Unleash the CPU! */ cpu_set(cpu, smp_commenced_mask); + + /* + * Check TSC synchronization with the AP: + */ + check_tsc_sync_source(cpu); + while (!cpu_isset(cpu, cpu_online_map)) cpu_relax(); diff --git a/arch/i386/kernel/sysenter.c b/arch/i386/kernel/sysenter.c index bc882a2b1db..13ca54a85a1 100644 --- a/arch/i386/kernel/sysenter.c +++ b/arch/i386/kernel/sysenter.c @@ -78,7 +78,7 @@ int __init sysenter_setup(void) syscall_pages[0] = virt_to_page(syscall_page); #ifdef CONFIG_COMPAT_VDSO - __set_fixmap(FIX_VDSO, __pa(syscall_page), PAGE_READONLY); + __set_fixmap(FIX_VDSO, __pa(syscall_page), PAGE_READONLY_EXEC); printk("Compat vDSO mapped to %08lx.\n", __fix_to_virt(FIX_VDSO)); #endif diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c index c505b16c099..a5350059557 100644 --- a/arch/i386/kernel/time.c +++ b/arch/i386/kernel/time.c @@ -131,15 +131,13 @@ unsigned long profile_pc(struct pt_regs *regs) unsigned long pc = instruction_pointer(regs); #ifdef CONFIG_SMP - if (!user_mode_vm(regs) && in_lock_functions(pc)) { + if (!v8086_mode(regs) && SEGMENT_IS_KERNEL_CODE(regs->xcs) && + in_lock_functions(pc)) { #ifdef CONFIG_FRAME_POINTER return *(unsigned long *)(regs->ebp + 4); #else - unsigned long *sp; - if ((regs->xcs & 3) == 0) - sp = (unsigned long *)®s->esp; - else - sp = (unsigned long *)regs->esp; + unsigned long *sp = (unsigned long *)®s->esp; + /* Return address is either directly at stack pointer or above a saved eflags. Eflags has bits 22-31 zero, kernel addresses don't. */ @@ -161,15 +159,6 @@ EXPORT_SYMBOL(profile_pc); */ irqreturn_t timer_interrupt(int irq, void *dev_id) { - /* - * Here we are in the timer irq handler. We just have irqs locally - * disabled but we don't know if the timer_bh is running on the other - * CPU. We need to avoid to SMP race with it. NOTE: we don' t need - * the irq version of write_lock because as just said we have irq - * locally disabled. -arca - */ - write_seqlock(&xtime_lock); - #ifdef CONFIG_X86_IO_APIC if (timer_ack) { /* @@ -188,7 +177,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) do_timer_interrupt_hook(); - if (MCA_bus) { /* The PS/2 uses level-triggered interrupts. You can't turn them off, nor would you want to (any attempt to @@ -203,18 +191,11 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) outb_p( irq_v|0x80, 0x61 ); /* reset the IRQ */ } - write_sequnlock(&xtime_lock); - -#ifdef CONFIG_X86_LOCAL_APIC - if (using_apic_timer) - smp_send_timer_broadcast_ipi(); -#endif - return IRQ_HANDLED; } /* not static: needed by APM */ -unsigned long get_cmos_time(void) +unsigned long read_persistent_clock(void) { unsigned long retval; unsigned long flags; @@ -227,11 +208,11 @@ unsigned long get_cmos_time(void) return retval; } -EXPORT_SYMBOL(get_cmos_time); static void sync_cmos_clock(unsigned long dummy); static DEFINE_TIMER(sync_cmos_timer, sync_cmos_clock, 0, 0); +int no_sync_cmos_clock; static void sync_cmos_clock(unsigned long dummy) { @@ -275,117 +256,20 @@ static void sync_cmos_clock(unsigned long dummy) void notify_arch_cmos_timer(void) { - mod_timer(&sync_cmos_timer, jiffies + 1); -} - -static long clock_cmos_diff; -static unsigned long sleep_start; - -static int timer_suspend(struct sys_device *dev, pm_message_t state) -{ - /* - * Estimate time zone so that set_time can update the clock - */ - unsigned long ctime = get_cmos_time(); - - clock_cmos_diff = -ctime; - clock_cmos_diff += get_seconds(); - sleep_start = ctime; - return 0; -} - -static int timer_resume(struct sys_device *dev) -{ - unsigned long flags; - unsigned long sec; - unsigned long ctime = get_cmos_time(); - long sleep_length = (ctime - sleep_start) * HZ; - struct timespec ts; - - if (sleep_length < 0) { - printk(KERN_WARNING "CMOS clock skew detected in timer resume!\n"); - /* The time after the resume must not be earlier than the time - * before the suspend or some nasty things will happen - */ - sleep_length = 0; - ctime = sleep_start; - } -#ifdef CONFIG_HPET_TIMER - if (is_hpet_enabled()) - hpet_reenable(); -#endif - setup_pit_timer(); - - sec = ctime + clock_cmos_diff; - ts.tv_sec = sec; - ts.tv_nsec = 0; - do_settimeofday(&ts); - write_seqlock_irqsave(&xtime_lock, flags); - jiffies_64 += sleep_length; - write_sequnlock_irqrestore(&xtime_lock, flags); - touch_softlockup_watchdog(); - return 0; -} - -static struct sysdev_class timer_sysclass = { - .resume = timer_resume, - .suspend = timer_suspend, - set_kset_name("timer"), -}; - - -/* XXX this driverfs stuff should probably go elsewhere later -john */ -static struct sys_device device_timer = { - .id = 0, - .cls = &timer_sysclass, -}; - -static int time_init_device(void) -{ - int error = sysdev_class_register(&timer_sysclass); - if (!error) - error = sysdev_register(&device_timer); - return error; + if (!no_sync_cmos_clock) + mod_timer(&sync_cmos_timer, jiffies + 1); } -device_initcall(time_init_device); - -#ifdef CONFIG_HPET_TIMER extern void (*late_time_init)(void); /* Duplicate of time_init() below, with hpet_enable part added */ static void __init hpet_time_init(void) { - struct timespec ts; - ts.tv_sec = get_cmos_time(); - ts.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); - - do_settimeofday(&ts); - - if ((hpet_enable() >= 0) && hpet_use_timer) { - printk("Using HPET for base-timer\n"); - } - + if (!hpet_enable()) + setup_pit_timer(); do_time_init(); } -#endif void __init time_init(void) { - struct timespec ts; -#ifdef CONFIG_HPET_TIMER - if (is_hpet_capable()) { - /* - * HPET initialization needs to do memory-mapped io. So, let - * us do a late initialization after mem_init(). - */ - late_time_init = hpet_time_init; - return; - } -#endif - ts.tv_sec = get_cmos_time(); - ts.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); - - do_settimeofday(&ts); - - do_time_init(); + late_time_init = hpet_time_init; } diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index 0efad8aeb41..af0d3f70a81 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -94,6 +94,7 @@ asmlinkage void spurious_interrupt_bug(void); asmlinkage void machine_check(void); int kstack_depth_to_print = 24; +static unsigned int code_bytes = 64; ATOMIC_NOTIFIER_HEAD(i386die_chain); int register_die_notifier(struct notifier_block *nb) @@ -291,10 +292,11 @@ void show_registers(struct pt_regs *regs) int i; int in_kernel = 1; unsigned long esp; - unsigned short ss; + unsigned short ss, gs; esp = (unsigned long) (®s->esp); savesegment(ss, ss); + savesegment(gs, gs); if (user_mode_vm(regs)) { in_kernel = 0; esp = regs->esp; @@ -313,8 +315,8 @@ void show_registers(struct pt_regs *regs) regs->eax, regs->ebx, regs->ecx, regs->edx); printk(KERN_EMERG "esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", regs->esi, regs->edi, regs->ebp, esp); - printk(KERN_EMERG "ds: %04x es: %04x ss: %04x\n", - regs->xds & 0xffff, regs->xes & 0xffff, ss); + printk(KERN_EMERG "ds: %04x es: %04x fs: %04x gs: %04x ss: %04x\n", + regs->xds & 0xffff, regs->xes & 0xffff, regs->xfs & 0xffff, gs, ss); printk(KERN_EMERG "Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)", TASK_COMM_LEN, current->comm, current->pid, current_thread_info(), current, current->thread_info); @@ -324,7 +326,8 @@ void show_registers(struct pt_regs *regs) */ if (in_kernel) { u8 *eip; - int code_bytes = 64; + unsigned int code_prologue = code_bytes * 43 / 64; + unsigned int code_len = code_bytes; unsigned char c; printk("\n" KERN_EMERG "Stack: "); @@ -332,14 +335,14 @@ void show_registers(struct pt_regs *regs) printk(KERN_EMERG "Code: "); - eip = (u8 *)regs->eip - 43; + eip = (u8 *)regs->eip - code_prologue; if (eip < (u8 *)PAGE_OFFSET || probe_kernel_address(eip, c)) { /* try starting at EIP */ eip = (u8 *)regs->eip; - code_bytes = 32; + code_len = code_len - code_prologue + 1; } - for (i = 0; i < code_bytes; i++, eip++) { + for (i = 0; i < code_len; i++, eip++) { if (eip < (u8 *)PAGE_OFFSET || probe_kernel_address(eip, c)) { printk(" Bad EIP value."); @@ -1191,3 +1194,13 @@ static int __init kstack_setup(char *s) return 1; } __setup("kstack=", kstack_setup); + +static int __init code_bytes_setup(char *s) +{ + code_bytes = simple_strtoul(s, NULL, 0); + if (code_bytes > 8192) + code_bytes = 8192; + + return 1; +} +__setup("code_bytes=", code_bytes_setup); diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c index 2cfc7b09b92..3082a418635 100644 --- a/arch/i386/kernel/tsc.c +++ b/arch/i386/kernel/tsc.c @@ -23,6 +23,7 @@ * an extra value to store the TSC freq */ unsigned int tsc_khz; +unsigned long long (*custom_sched_clock)(void); int tsc_disable; @@ -59,12 +60,6 @@ static inline int check_tsc_unstable(void) return tsc_unstable; } -void mark_tsc_unstable(void) -{ - tsc_unstable = 1; -} -EXPORT_SYMBOL_GPL(mark_tsc_unstable); - /* Accellerators for sched_clock() * convert from cycles(64bits) => nanoseconds (64bits) * basic equation: @@ -107,14 +102,14 @@ unsigned long long sched_clock(void) { unsigned long long this_offset; + if (unlikely(custom_sched_clock)) + return (*custom_sched_clock)(); + /* - * in the NUMA case we dont use the TSC as they are not - * synchronized across all CPUs. + * Fall back to jiffies if there's no TSC available: */ -#ifndef CONFIG_NUMA - if (!cpu_khz || check_tsc_unstable()) -#endif - /* no locking but a rare wrong value is not a big deal */ + if (unlikely(tsc_disable)) + /* No locking but a rare wrong value is not a big deal: */ return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ); /* read the Time Stamp Counter: */ @@ -194,13 +189,13 @@ EXPORT_SYMBOL(recalibrate_cpu_khz); void __init tsc_init(void) { if (!cpu_has_tsc || tsc_disable) - return; + goto out_no_tsc; cpu_khz = calculate_cpu_khz(); tsc_khz = cpu_khz; if (!cpu_khz) - return; + goto out_no_tsc; printk("Detected %lu.%03lu MHz processor.\n", (unsigned long)cpu_khz / 1000, @@ -208,37 +203,18 @@ void __init tsc_init(void) set_cyc2ns_scale(cpu_khz); use_tsc_delay(); -} + return; -#ifdef CONFIG_CPU_FREQ - -static unsigned int cpufreq_delayed_issched = 0; -static unsigned int cpufreq_init = 0; -static struct work_struct cpufreq_delayed_get_work; - -static void handle_cpufreq_delayed_get(struct work_struct *work) -{ - unsigned int cpu; - - for_each_online_cpu(cpu) - cpufreq_get(cpu); - - cpufreq_delayed_issched = 0; +out_no_tsc: + /* + * Set the tsc_disable flag if there's no TSC support, this + * makes it a fast flag for the kernel to see whether it + * should be using the TSC. + */ + tsc_disable = 1; } -/* - * if we notice cpufreq oddness, schedule a call to cpufreq_get() as it tries - * to verify the CPU frequency the timing core thinks the CPU is running - * at is still correct. - */ -static inline void cpufreq_delayed_get(void) -{ - if (cpufreq_init && !cpufreq_delayed_issched) { - cpufreq_delayed_issched = 1; - printk(KERN_DEBUG "Checking if CPU frequency changed.\n"); - schedule_work(&cpufreq_delayed_get_work); - } -} +#ifdef CONFIG_CPU_FREQ /* * if the CPU frequency is scaled, TSC-based delays will need a different @@ -303,17 +279,9 @@ static struct notifier_block time_cpufreq_notifier_block = { static int __init cpufreq_tsc(void) { - int ret; - - INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get); - ret = cpufreq_register_notifier(&time_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - if (!ret) - cpufreq_init = 1; - - return ret; + return cpufreq_register_notifier(&time_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); } - core_initcall(cpufreq_tsc); #endif @@ -321,7 +289,6 @@ core_initcall(cpufreq_tsc); /* clock source code */ static unsigned long current_tsc_khz = 0; -static int tsc_update_callback(void); static cycle_t read_tsc(void) { @@ -339,37 +306,28 @@ static struct clocksource clocksource_tsc = { .mask = CLOCKSOURCE_MASK(64), .mult = 0, /* to be set */ .shift = 22, - .update_callback = tsc_update_callback, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS | + CLOCK_SOURCE_MUST_VERIFY, }; -static int tsc_update_callback(void) +void mark_tsc_unstable(void) { - int change = 0; - - /* check to see if we should switch to the safe clocksource: */ - if (clocksource_tsc.rating != 0 && check_tsc_unstable()) { - clocksource_tsc.rating = 0; - clocksource_reselect(); - change = 1; - } - - /* only update if tsc_khz has changed: */ - if (current_tsc_khz != tsc_khz) { - current_tsc_khz = tsc_khz; - clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, - clocksource_tsc.shift); - change = 1; + if (!tsc_unstable) { + tsc_unstable = 1; + /* Can be called before registration */ + if (clocksource_tsc.mult) + clocksource_change_rating(&clocksource_tsc, 0); + else + clocksource_tsc.rating = 0; } - - return change; } +EXPORT_SYMBOL_GPL(mark_tsc_unstable); static int __init dmi_mark_tsc_unstable(struct dmi_system_id *d) { printk(KERN_NOTICE "%s detected: marking TSC unstable.\n", d->ident); - mark_tsc_unstable(); + tsc_unstable = 1; return 0; } @@ -386,65 +344,44 @@ static struct dmi_system_id __initdata bad_tsc_dmi_table[] = { {} }; -#define TSC_FREQ_CHECK_INTERVAL (10*MSEC_PER_SEC) /* 10sec in MS */ -static struct timer_list verify_tsc_freq_timer; - -/* XXX - Probably should add locking */ -static void verify_tsc_freq(unsigned long unused) -{ - static u64 last_tsc; - static unsigned long last_jiffies; - - u64 now_tsc, interval_tsc; - unsigned long now_jiffies, interval_jiffies; - - - if (check_tsc_unstable()) - return; - - rdtscll(now_tsc); - now_jiffies = jiffies; - - if (!last_jiffies) { - goto out; - } - - interval_jiffies = now_jiffies - last_jiffies; - interval_tsc = now_tsc - last_tsc; - interval_tsc *= HZ; - do_div(interval_tsc, cpu_khz*1000); - - if (interval_tsc < (interval_jiffies * 3 / 4)) { - printk("TSC appears to be running slowly. " - "Marking it as unstable\n"); - mark_tsc_unstable(); - return; - } - -out: - last_tsc = now_tsc; - last_jiffies = now_jiffies; - /* set us up to go off on the next interval: */ - mod_timer(&verify_tsc_freq_timer, - jiffies + msecs_to_jiffies(TSC_FREQ_CHECK_INTERVAL)); -} - /* * Make an educated guess if the TSC is trustworthy and synchronized * over all CPUs. */ -static __init int unsynchronized_tsc(void) +__cpuinit int unsynchronized_tsc(void) { + if (!cpu_has_tsc || tsc_unstable) + return 1; /* * Intel systems are normally all synchronized. * Exceptions must mark TSC as unstable: */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) - return 0; + if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) { + /* assume multi socket systems are not synchronized: */ + if (num_possible_cpus() > 1) + tsc_unstable = 1; + } + return tsc_unstable; +} + +/* + * Geode_LX - the OLPC CPU has a possibly a very reliable TSC + */ +#ifdef CONFIG_MGEODE_LX +/* RTSC counts during suspend */ +#define RTSC_SUSP 0x100 + +static void __init check_geode_tsc_reliable(void) +{ + unsigned long val; - /* assume multi socket systems are not synchronized: */ - return num_possible_cpus() > 1; + rdmsrl(MSR_GEODE_BUSCONT_CONF0, val); + if ((val & RTSC_SUSP)) + clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY; } +#else +static inline void check_geode_tsc_reliable(void) { } +#endif static int __init init_tsc_clocksource(void) { @@ -453,20 +390,16 @@ static int __init init_tsc_clocksource(void) /* check blacklist */ dmi_check_system(bad_tsc_dmi_table); - if (unsynchronized_tsc()) /* mark unstable if unsynced */ - mark_tsc_unstable(); + unsynchronized_tsc(); + check_geode_tsc_reliable(); current_tsc_khz = tsc_khz; clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, clocksource_tsc.shift); /* lower the rating if we already know its unstable: */ - if (check_tsc_unstable()) + if (check_tsc_unstable()) { clocksource_tsc.rating = 0; - - init_timer(&verify_tsc_freq_timer); - verify_tsc_freq_timer.function = verify_tsc_freq; - verify_tsc_freq_timer.expires = - jiffies + msecs_to_jiffies(TSC_FREQ_CHECK_INTERVAL); - add_timer(&verify_tsc_freq_timer); + clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS; + } return clocksource_register(&clocksource_tsc); } diff --git a/arch/i386/kernel/tsc_sync.c b/arch/i386/kernel/tsc_sync.c new file mode 100644 index 00000000000..12424629af8 --- /dev/null +++ b/arch/i386/kernel/tsc_sync.c @@ -0,0 +1 @@ +#include "../../x86_64/kernel/tsc_sync.c" diff --git a/arch/i386/kernel/vm86.c b/arch/i386/kernel/vm86.c index be2f96e67f7..d1b8f2b7aea 100644 --- a/arch/i386/kernel/vm86.c +++ b/arch/i386/kernel/vm86.c @@ -96,12 +96,12 @@ static int copy_vm86_regs_to_user(struct vm86_regs __user *user, { int ret = 0; - /* kernel_vm86_regs is missing xfs, so copy everything up to - (but not including) xgs, and then rest after xgs. */ - ret += copy_to_user(user, regs, offsetof(struct kernel_vm86_regs, pt.xgs)); - ret += copy_to_user(&user->__null_gs, ®s->pt.xgs, + /* kernel_vm86_regs is missing xgs, so copy everything up to + (but not including) orig_eax, and then rest including orig_eax. */ + ret += copy_to_user(user, regs, offsetof(struct kernel_vm86_regs, pt.orig_eax)); + ret += copy_to_user(&user->orig_eax, ®s->pt.orig_eax, sizeof(struct kernel_vm86_regs) - - offsetof(struct kernel_vm86_regs, pt.xgs)); + offsetof(struct kernel_vm86_regs, pt.orig_eax)); return ret; } @@ -113,12 +113,13 @@ static int copy_vm86_regs_from_user(struct kernel_vm86_regs *regs, { int ret = 0; - ret += copy_from_user(regs, user, offsetof(struct kernel_vm86_regs, pt.xgs)); - ret += copy_from_user(®s->pt.xgs, &user->__null_gs, + /* copy eax-xfs inclusive */ + ret += copy_from_user(regs, user, offsetof(struct kernel_vm86_regs, pt.orig_eax)); + /* copy orig_eax-__gsh+extra */ + ret += copy_from_user(®s->pt.orig_eax, &user->orig_eax, sizeof(struct kernel_vm86_regs) - - offsetof(struct kernel_vm86_regs, pt.xgs) + + offsetof(struct kernel_vm86_regs, pt.orig_eax) + extra); - return ret; } @@ -157,8 +158,8 @@ struct pt_regs * fastcall save_v86_state(struct kernel_vm86_regs * regs) ret = KVM86->regs32; - loadsegment(fs, current->thread.saved_fs); - ret->xgs = current->thread.saved_gs; + ret->xfs = current->thread.saved_fs; + loadsegment(gs, current->thread.saved_gs); return ret; } @@ -285,9 +286,9 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk */ info->regs.pt.xds = 0; info->regs.pt.xes = 0; - info->regs.pt.xgs = 0; + info->regs.pt.xfs = 0; -/* we are clearing fs later just before "jmp resume_userspace", +/* we are clearing gs later just before "jmp resume_userspace", * because it is not saved/restored. */ @@ -321,8 +322,8 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk */ info->regs32->eax = 0; tsk->thread.saved_esp0 = tsk->thread.esp0; - savesegment(fs, tsk->thread.saved_fs); - tsk->thread.saved_gs = info->regs32->xgs; + tsk->thread.saved_fs = info->regs32->xfs; + savesegment(gs, tsk->thread.saved_gs); tss = &per_cpu(init_tss, get_cpu()); tsk->thread.esp0 = (unsigned long) &info->VM86_TSS_ESP0; @@ -342,7 +343,7 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk __asm__ __volatile__( "movl %0,%%esp\n\t" "movl %1,%%ebp\n\t" - "mov %2, %%fs\n\t" + "mov %2, %%gs\n\t" "jmp resume_userspace" : /* no outputs */ :"r" (&info->regs), "r" (task_thread_info(tsk)), "r" (0)); diff --git a/arch/i386/kernel/vmi.c b/arch/i386/kernel/vmi.c new file mode 100644 index 00000000000..bb5a7abf949 --- /dev/null +++ b/arch/i386/kernel/vmi.c @@ -0,0 +1,949 @@ +/* + * VMI specific paravirt-ops implementation + * + * Copyright (C) 2005, VMware, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to zach@vmware.com + * + */ + +#include <linux/module.h> +#include <linux/license.h> +#include <linux/cpu.h> +#include <linux/bootmem.h> +#include <linux/mm.h> +#include <asm/vmi.h> +#include <asm/io.h> +#include <asm/fixmap.h> +#include <asm/apicdef.h> +#include <asm/apic.h> +#include <asm/processor.h> +#include <asm/timer.h> +#include <asm/vmi_time.h> + +/* Convenient for calling VMI functions indirectly in the ROM */ +typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void); +typedef u64 __attribute__((regparm(2))) (VROMLONGFUNC)(int); + +#define call_vrom_func(rom,func) \ + (((VROMFUNC *)(rom->func))()) + +#define call_vrom_long_func(rom,func,arg) \ + (((VROMLONGFUNC *)(rom->func)) (arg)) + +static struct vrom_header *vmi_rom; +static int license_gplok; +static int disable_nodelay; +static int disable_pge; +static int disable_pse; +static int disable_sep; +static int disable_tsc; +static int disable_mtrr; + +/* Cached VMI operations */ +struct { + void (*cpuid)(void /* non-c */); + void (*_set_ldt)(u32 selector); + void (*set_tr)(u32 selector); + void (*set_kernel_stack)(u32 selector, u32 esp0); + void (*allocate_page)(u32, u32, u32, u32, u32); + void (*release_page)(u32, u32); + void (*set_pte)(pte_t, pte_t *, unsigned); + void (*update_pte)(pte_t *, unsigned); + void (*set_linear_mapping)(int, u32, u32, u32); + void (*flush_tlb)(int); + void (*set_initial_ap_state)(int, int); + void (*halt)(void); +} vmi_ops; + +/* XXX move this to alternative.h */ +extern struct paravirt_patch __start_parainstructions[], + __stop_parainstructions[]; + +/* + * VMI patching routines. + */ +#define MNEM_CALL 0xe8 +#define MNEM_JMP 0xe9 +#define MNEM_RET 0xc3 + +static char irq_save_disable_callout[] = { + MNEM_CALL, 0, 0, 0, 0, + MNEM_CALL, 0, 0, 0, 0, + MNEM_RET +}; +#define IRQ_PATCH_INT_MASK 0 +#define IRQ_PATCH_DISABLE 5 + +static inline void patch_offset(unsigned char *eip, unsigned char *dest) +{ + *(unsigned long *)(eip+1) = dest-eip-5; +} + +static unsigned patch_internal(int call, unsigned len, void *insns) +{ + u64 reloc; + struct vmi_relocation_info *const rel = (struct vmi_relocation_info *)&reloc; + reloc = call_vrom_long_func(vmi_rom, get_reloc, call); + switch(rel->type) { + case VMI_RELOCATION_CALL_REL: + BUG_ON(len < 5); + *(char *)insns = MNEM_CALL; + patch_offset(insns, rel->eip); + return 5; + + case VMI_RELOCATION_JUMP_REL: + BUG_ON(len < 5); + *(char *)insns = MNEM_JMP; + patch_offset(insns, rel->eip); + return 5; + + case VMI_RELOCATION_NOP: + /* obliterate the whole thing */ + return 0; + + case VMI_RELOCATION_NONE: + /* leave native code in place */ + break; + + default: + BUG(); + } + return len; +} + +/* + * Apply patch if appropriate, return length of new instruction + * sequence. The callee does nop padding for us. + */ +static unsigned vmi_patch(u8 type, u16 clobbers, void *insns, unsigned len) +{ + switch (type) { + case PARAVIRT_IRQ_DISABLE: + return patch_internal(VMI_CALL_DisableInterrupts, len, insns); + case PARAVIRT_IRQ_ENABLE: + return patch_internal(VMI_CALL_EnableInterrupts, len, insns); + case PARAVIRT_RESTORE_FLAGS: + return patch_internal(VMI_CALL_SetInterruptMask, len, insns); + case PARAVIRT_SAVE_FLAGS: + return patch_internal(VMI_CALL_GetInterruptMask, len, insns); + case PARAVIRT_SAVE_FLAGS_IRQ_DISABLE: + if (len >= 10) { + patch_internal(VMI_CALL_GetInterruptMask, len, insns); + patch_internal(VMI_CALL_DisableInterrupts, len-5, insns+5); + return 10; + } else { + /* + * You bastards didn't leave enough room to + * patch save_flags_irq_disable inline. Patch + * to a helper + */ + BUG_ON(len < 5); + *(char *)insns = MNEM_CALL; + patch_offset(insns, irq_save_disable_callout); + return 5; + } + case PARAVIRT_INTERRUPT_RETURN: + return patch_internal(VMI_CALL_IRET, len, insns); + case PARAVIRT_STI_SYSEXIT: + return patch_internal(VMI_CALL_SYSEXIT, len, insns); + default: + break; + } + return len; +} + +/* CPUID has non-C semantics, and paravirt-ops API doesn't match hardware ISA */ +static void vmi_cpuid(unsigned int *eax, unsigned int *ebx, + unsigned int *ecx, unsigned int *edx) +{ + int override = 0; + if (*eax == 1) + override = 1; + asm volatile ("call *%6" + : "=a" (*eax), + "=b" (*ebx), + "=c" (*ecx), + "=d" (*edx) + : "0" (*eax), "2" (*ecx), "r" (vmi_ops.cpuid)); + if (override) { + if (disable_pse) + *edx &= ~X86_FEATURE_PSE; + if (disable_pge) + *edx &= ~X86_FEATURE_PGE; + if (disable_sep) + *edx &= ~X86_FEATURE_SEP; + if (disable_tsc) + *edx &= ~X86_FEATURE_TSC; + if (disable_mtrr) + *edx &= ~X86_FEATURE_MTRR; + } +} + +static inline void vmi_maybe_load_tls(struct desc_struct *gdt, int nr, struct desc_struct *new) +{ + if (gdt[nr].a != new->a || gdt[nr].b != new->b) + write_gdt_entry(gdt, nr, new->a, new->b); +} + +static void vmi_load_tls(struct thread_struct *t, unsigned int cpu) +{ + struct desc_struct *gdt = get_cpu_gdt_table(cpu); + vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 0, &t->tls_array[0]); + vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 1, &t->tls_array[1]); + vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 2, &t->tls_array[2]); +} + +static void vmi_set_ldt(const void *addr, unsigned entries) +{ + unsigned cpu = smp_processor_id(); + u32 low, high; + + pack_descriptor(&low, &high, (unsigned long)addr, + entries * sizeof(struct desc_struct) - 1, + DESCTYPE_LDT, 0); + write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT, low, high); + vmi_ops._set_ldt(entries ? GDT_ENTRY_LDT*sizeof(struct desc_struct) : 0); +} + +static void vmi_set_tr(void) +{ + vmi_ops.set_tr(GDT_ENTRY_TSS*sizeof(struct desc_struct)); +} + +static void vmi_load_esp0(struct tss_struct *tss, + struct thread_struct *thread) +{ + tss->esp0 = thread->esp0; + + /* This can only happen when SEP is enabled, no need to test "SEP"arately */ + if (unlikely(tss->ss1 != thread->sysenter_cs)) { + tss->ss1 = thread->sysenter_cs; + wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0); + } + vmi_ops.set_kernel_stack(__KERNEL_DS, tss->esp0); +} + +static void vmi_flush_tlb_user(void) +{ + vmi_ops.flush_tlb(VMI_FLUSH_TLB); +} + +static void vmi_flush_tlb_kernel(void) +{ + vmi_ops.flush_tlb(VMI_FLUSH_TLB | VMI_FLUSH_GLOBAL); +} + +/* Stub to do nothing at all; used for delays and unimplemented calls */ +static void vmi_nop(void) +{ +} + +/* For NO_IDLE_HZ, we stop the clock when halting the kernel */ +#ifdef CONFIG_NO_IDLE_HZ +static fastcall void vmi_safe_halt(void) +{ + int idle = vmi_stop_hz_timer(); + vmi_ops.halt(); + if (idle) { + local_irq_disable(); + vmi_account_time_restart_hz_timer(); + local_irq_enable(); + } +} +#endif + +#ifdef CONFIG_DEBUG_PAGE_TYPE + +#ifdef CONFIG_X86_PAE +#define MAX_BOOT_PTS (2048+4+1) +#else +#define MAX_BOOT_PTS (1024+1) +#endif + +/* + * During boot, mem_map is not yet available in paging_init, so stash + * all the boot page allocations here. + */ +static struct { + u32 pfn; + int type; +} boot_page_allocations[MAX_BOOT_PTS]; +static int num_boot_page_allocations; +static int boot_allocations_applied; + +void vmi_apply_boot_page_allocations(void) +{ + int i; + BUG_ON(!mem_map); + for (i = 0; i < num_boot_page_allocations; i++) { + struct page *page = pfn_to_page(boot_page_allocations[i].pfn); + page->type = boot_page_allocations[i].type; + page->type = boot_page_allocations[i].type & + ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE); + } + boot_allocations_applied = 1; +} + +static void record_page_type(u32 pfn, int type) +{ + BUG_ON(num_boot_page_allocations >= MAX_BOOT_PTS); + boot_page_allocations[num_boot_page_allocations].pfn = pfn; + boot_page_allocations[num_boot_page_allocations].type = type; + num_boot_page_allocations++; +} + +static void check_zeroed_page(u32 pfn, int type, struct page *page) +{ + u32 *ptr; + int i; + int limit = PAGE_SIZE / sizeof(int); + + if (page_address(page)) + ptr = (u32 *)page_address(page); + else + ptr = (u32 *)__va(pfn << PAGE_SHIFT); + /* + * When cloning the root in non-PAE mode, only the userspace + * pdes need to be zeroed. + */ + if (type & VMI_PAGE_CLONE) + limit = USER_PTRS_PER_PGD; + for (i = 0; i < limit; i++) + BUG_ON(ptr[i]); +} + +/* + * We stash the page type into struct page so we can verify the page + * types are used properly. + */ +static void vmi_set_page_type(u32 pfn, int type) +{ + /* PAE can have multiple roots per page - don't track */ + if (PTRS_PER_PMD > 1 && (type & VMI_PAGE_PDP)) + return; + + if (boot_allocations_applied) { + struct page *page = pfn_to_page(pfn); + if (type != VMI_PAGE_NORMAL) + BUG_ON(page->type); + else + BUG_ON(page->type == VMI_PAGE_NORMAL); + page->type = type & ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE); + if (type & VMI_PAGE_ZEROED) + check_zeroed_page(pfn, type, page); + } else { + record_page_type(pfn, type); + } +} + +static void vmi_check_page_type(u32 pfn, int type) +{ + /* PAE can have multiple roots per page - skip checks */ + if (PTRS_PER_PMD > 1 && (type & VMI_PAGE_PDP)) + return; + + type &= ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE); + if (boot_allocations_applied) { + struct page *page = pfn_to_page(pfn); + BUG_ON((page->type ^ type) & VMI_PAGE_PAE); + BUG_ON(type == VMI_PAGE_NORMAL && page->type); + BUG_ON((type & page->type) == 0); + } +} +#else +#define vmi_set_page_type(p,t) do { } while (0) +#define vmi_check_page_type(p,t) do { } while (0) +#endif + +static void vmi_allocate_pt(u32 pfn) +{ + vmi_set_page_type(pfn, VMI_PAGE_L1); + vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0); +} + +static void vmi_allocate_pd(u32 pfn) +{ + /* + * This call comes in very early, before mem_map is setup. + * It is called only for swapper_pg_dir, which already has + * data on it. + */ + vmi_set_page_type(pfn, VMI_PAGE_L2); + vmi_ops.allocate_page(pfn, VMI_PAGE_L2, 0, 0, 0); +} + +static void vmi_allocate_pd_clone(u32 pfn, u32 clonepfn, u32 start, u32 count) +{ + vmi_set_page_type(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE); + vmi_check_page_type(clonepfn, VMI_PAGE_L2); + vmi_ops.allocate_page(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE, clonepfn, start, count); +} + +static void vmi_release_pt(u32 pfn) +{ + vmi_ops.release_page(pfn, VMI_PAGE_L1); + vmi_set_page_type(pfn, VMI_PAGE_NORMAL); +} + +static void vmi_release_pd(u32 pfn) +{ + vmi_ops.release_page(pfn, VMI_PAGE_L2); + vmi_set_page_type(pfn, VMI_PAGE_NORMAL); +} + +/* + * Helper macros for MMU update flags. We can defer updates until a flush + * or page invalidation only if the update is to the current address space + * (otherwise, there is no flush). We must check against init_mm, since + * this could be a kernel update, which usually passes init_mm, although + * sometimes this check can be skipped if we know the particular function + * is only called on user mode PTEs. We could change the kernel to pass + * current->active_mm here, but in particular, I was unsure if changing + * mm/highmem.c to do this would still be correct on other architectures. + */ +#define is_current_as(mm, mustbeuser) ((mm) == current->active_mm || \ + (!mustbeuser && (mm) == &init_mm)) +#define vmi_flags_addr(mm, addr, level, user) \ + ((level) | (is_current_as(mm, user) ? \ + (VMI_PAGE_CURRENT_AS | ((addr) & VMI_PAGE_VA_MASK)) : 0)) +#define vmi_flags_addr_defer(mm, addr, level, user) \ + ((level) | (is_current_as(mm, user) ? \ + (VMI_PAGE_DEFER | VMI_PAGE_CURRENT_AS | ((addr) & VMI_PAGE_VA_MASK)) : 0)) + +static void vmi_update_pte(struct mm_struct *mm, u32 addr, pte_t *ptep) +{ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.update_pte(ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0)); +} + +static void vmi_update_pte_defer(struct mm_struct *mm, u32 addr, pte_t *ptep) +{ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.update_pte(ptep, vmi_flags_addr_defer(mm, addr, VMI_PAGE_PT, 0)); +} + +static void vmi_set_pte(pte_t *ptep, pte_t pte) +{ + /* XXX because of set_pmd_pte, this can be called on PT or PD layers */ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE | VMI_PAGE_PD); + vmi_ops.set_pte(pte, ptep, VMI_PAGE_PT); +} + +static void vmi_set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pte) +{ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0)); +} + +static void vmi_set_pmd(pmd_t *pmdp, pmd_t pmdval) +{ +#ifdef CONFIG_X86_PAE + const pte_t pte = { pmdval.pmd, pmdval.pmd >> 32 }; + vmi_check_page_type(__pa(pmdp) >> PAGE_SHIFT, VMI_PAGE_PMD); +#else + const pte_t pte = { pmdval.pud.pgd.pgd }; + vmi_check_page_type(__pa(pmdp) >> PAGE_SHIFT, VMI_PAGE_PGD); +#endif + vmi_ops.set_pte(pte, (pte_t *)pmdp, VMI_PAGE_PD); +} + +#ifdef CONFIG_X86_PAE + +static void vmi_set_pte_atomic(pte_t *ptep, pte_t pteval) +{ + /* + * XXX This is called from set_pmd_pte, but at both PT + * and PD layers so the VMI_PAGE_PT flag is wrong. But + * it is only called for large page mapping changes, + * the Xen backend, doesn't support large pages, and the + * ESX backend doesn't depend on the flag. + */ + set_64bit((unsigned long long *)ptep,pte_val(pteval)); + vmi_ops.update_pte(ptep, VMI_PAGE_PT); +} + +static void vmi_set_pte_present(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) +{ + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.set_pte(pte, ptep, vmi_flags_addr_defer(mm, addr, VMI_PAGE_PT, 1)); +} + +static void vmi_set_pud(pud_t *pudp, pud_t pudval) +{ + /* Um, eww */ + const pte_t pte = { pudval.pgd.pgd, pudval.pgd.pgd >> 32 }; + vmi_check_page_type(__pa(pudp) >> PAGE_SHIFT, VMI_PAGE_PGD); + vmi_ops.set_pte(pte, (pte_t *)pudp, VMI_PAGE_PDP); +} + +static void vmi_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +{ + const pte_t pte = { 0 }; + vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE); + vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0)); +} + +void vmi_pmd_clear(pmd_t *pmd) +{ + const pte_t pte = { 0 }; + vmi_check_page_type(__pa(pmd) >> PAGE_SHIFT, VMI_PAGE_PMD); + vmi_ops.set_pte(pte, (pte_t *)pmd, VMI_PAGE_PD); +} +#endif + +#ifdef CONFIG_SMP +struct vmi_ap_state ap; +extern void setup_pda(void); + +static void __init /* XXX cpu hotplug */ +vmi_startup_ipi_hook(int phys_apicid, unsigned long start_eip, + unsigned long start_esp) +{ + /* Default everything to zero. This is fine for most GPRs. */ + memset(&ap, 0, sizeof(struct vmi_ap_state)); + + ap.gdtr_limit = GDT_SIZE - 1; + ap.gdtr_base = (unsigned long) get_cpu_gdt_table(phys_apicid); + + ap.idtr_limit = IDT_ENTRIES * 8 - 1; + ap.idtr_base = (unsigned long) idt_table; + + ap.ldtr = 0; + + ap.cs = __KERNEL_CS; + ap.eip = (unsigned long) start_eip; + ap.ss = __KERNEL_DS; + ap.esp = (unsigned long) start_esp; + + ap.ds = __USER_DS; + ap.es = __USER_DS; + ap.fs = __KERNEL_PDA; + ap.gs = 0; + + ap.eflags = 0; + + setup_pda(); + +#ifdef CONFIG_X86_PAE + /* efer should match BSP efer. */ + if (cpu_has_nx) { + unsigned l, h; + rdmsr(MSR_EFER, l, h); + ap.efer = (unsigned long long) h << 32 | l; + } +#endif + + ap.cr3 = __pa(swapper_pg_dir); + /* Protected mode, paging, AM, WP, NE, MP. */ + ap.cr0 = 0x80050023; + ap.cr4 = mmu_cr4_features; + vmi_ops.set_initial_ap_state(__pa(&ap), phys_apicid); +} +#endif + +static inline int __init check_vmi_rom(struct vrom_header *rom) +{ + struct pci_header *pci; + struct pnp_header *pnp; + const char *manufacturer = "UNKNOWN"; + const char *product = "UNKNOWN"; + const char *license = "unspecified"; + + if (rom->rom_signature != 0xaa55) + return 0; + if (rom->vrom_signature != VMI_SIGNATURE) + return 0; + if (rom->api_version_maj != VMI_API_REV_MAJOR || + rom->api_version_min+1 < VMI_API_REV_MINOR+1) { + printk(KERN_WARNING "VMI: Found mismatched rom version %d.%d\n", + rom->api_version_maj, + rom->api_version_min); + return 0; + } + + /* + * Relying on the VMI_SIGNATURE field is not 100% safe, so check + * the PCI header and device type to make sure this is really a + * VMI device. + */ + if (!rom->pci_header_offs) { + printk(KERN_WARNING "VMI: ROM does not contain PCI header.\n"); + return 0; + } + + pci = (struct pci_header *)((char *)rom+rom->pci_header_offs); + if (pci->vendorID != PCI_VENDOR_ID_VMWARE || + pci->deviceID != PCI_DEVICE_ID_VMWARE_VMI) { + /* Allow it to run... anyways, but warn */ + printk(KERN_WARNING "VMI: ROM from unknown manufacturer\n"); + } + + if (rom->pnp_header_offs) { + pnp = (struct pnp_header *)((char *)rom+rom->pnp_header_offs); + if (pnp->manufacturer_offset) + manufacturer = (const char *)rom+pnp->manufacturer_offset; + if (pnp->product_offset) + product = (const char *)rom+pnp->product_offset; + } + + if (rom->license_offs) + license = (char *)rom+rom->license_offs; + + printk(KERN_INFO "VMI: Found %s %s, API version %d.%d, ROM version %d.%d\n", + manufacturer, product, + rom->api_version_maj, rom->api_version_min, + pci->rom_version_maj, pci->rom_version_min); + + license_gplok = license_is_gpl_compatible(license); + if (!license_gplok) { + printk(KERN_WARNING "VMI: ROM license '%s' taints kernel... " + "inlining disabled\n", + license); + add_taint(TAINT_PROPRIETARY_MODULE); + } + return 1; +} + +/* + * Probe for the VMI option ROM + */ +static inline int __init probe_vmi_rom(void) +{ + unsigned long base; + + /* VMI ROM is in option ROM area, check signature */ + for (base = 0xC0000; base < 0xE0000; base += 2048) { + struct vrom_header *romstart; + romstart = (struct vrom_header *)isa_bus_to_virt(base); + if (check_vmi_rom(romstart)) { + vmi_rom = romstart; + return 1; + } + } + return 0; +} + +/* + * VMI setup common to all processors + */ +void vmi_bringup(void) +{ + /* We must establish the lowmem mapping for MMU ops to work */ + if (vmi_rom) + vmi_ops.set_linear_mapping(0, __PAGE_OFFSET, max_low_pfn, 0); +} + +/* + * Return a pointer to the VMI function or a NOP stub + */ +static void *vmi_get_function(int vmicall) +{ + u64 reloc; + const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc; + reloc = call_vrom_long_func(vmi_rom, get_reloc, vmicall); + BUG_ON(rel->type == VMI_RELOCATION_JUMP_REL); + if (rel->type == VMI_RELOCATION_CALL_REL) + return (void *)rel->eip; + else + return (void *)vmi_nop; +} + +/* + * Helper macro for making the VMI paravirt-ops fill code readable. + * For unimplemented operations, fall back to default. + */ +#define para_fill(opname, vmicall) \ +do { \ + reloc = call_vrom_long_func(vmi_rom, get_reloc, \ + VMI_CALL_##vmicall); \ + if (rel->type != VMI_RELOCATION_NONE) { \ + BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); \ + paravirt_ops.opname = (void *)rel->eip; \ + } \ +} while (0) + +/* + * Activate the VMI interface and switch into paravirtualized mode + */ +static inline int __init activate_vmi(void) +{ + short kernel_cs; + u64 reloc; + const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc; + + if (call_vrom_func(vmi_rom, vmi_init) != 0) { + printk(KERN_ERR "VMI ROM failed to initialize!"); + return 0; + } + savesegment(cs, kernel_cs); + + paravirt_ops.paravirt_enabled = 1; + paravirt_ops.kernel_rpl = kernel_cs & SEGMENT_RPL_MASK; + + paravirt_ops.patch = vmi_patch; + paravirt_ops.name = "vmi"; + + /* + * Many of these operations are ABI compatible with VMI. + * This means we can fill in the paravirt-ops with direct + * pointers into the VMI ROM. If the calling convention for + * these operations changes, this code needs to be updated. + * + * Exceptions + * CPUID paravirt-op uses pointers, not the native ISA + * halt has no VMI equivalent; all VMI halts are "safe" + * no MSR support yet - just trap and emulate. VMI uses the + * same ABI as the native ISA, but Linux wants exceptions + * from bogus MSR read / write handled + * rdpmc is not yet used in Linux + */ + + /* CPUID is special, so very special */ + reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_CPUID); + if (rel->type != VMI_RELOCATION_NONE) { + BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); + vmi_ops.cpuid = (void *)rel->eip; + paravirt_ops.cpuid = vmi_cpuid; + } + + para_fill(clts, CLTS); + para_fill(get_debugreg, GetDR); + para_fill(set_debugreg, SetDR); + para_fill(read_cr0, GetCR0); + para_fill(read_cr2, GetCR2); + para_fill(read_cr3, GetCR3); + para_fill(read_cr4, GetCR4); + para_fill(write_cr0, SetCR0); + para_fill(write_cr2, SetCR2); + para_fill(write_cr3, SetCR3); + para_fill(write_cr4, SetCR4); + para_fill(save_fl, GetInterruptMask); + para_fill(restore_fl, SetInterruptMask); + para_fill(irq_disable, DisableInterrupts); + para_fill(irq_enable, EnableInterrupts); + /* irq_save_disable !!! sheer pain */ + patch_offset(&irq_save_disable_callout[IRQ_PATCH_INT_MASK], + (char *)paravirt_ops.save_fl); + patch_offset(&irq_save_disable_callout[IRQ_PATCH_DISABLE], + (char *)paravirt_ops.irq_disable); +#ifndef CONFIG_NO_IDLE_HZ + para_fill(safe_halt, Halt); +#else + vmi_ops.halt = vmi_get_function(VMI_CALL_Halt); + paravirt_ops.safe_halt = vmi_safe_halt; +#endif + para_fill(wbinvd, WBINVD); + /* paravirt_ops.read_msr = vmi_rdmsr */ + /* paravirt_ops.write_msr = vmi_wrmsr */ + para_fill(read_tsc, RDTSC); + /* paravirt_ops.rdpmc = vmi_rdpmc */ + + /* TR interface doesn't pass TR value */ + reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_SetTR); + if (rel->type != VMI_RELOCATION_NONE) { + BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); + vmi_ops.set_tr = (void *)rel->eip; + paravirt_ops.load_tr_desc = vmi_set_tr; + } + + /* LDT is special, too */ + reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_SetLDT); + if (rel->type != VMI_RELOCATION_NONE) { + BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); + vmi_ops._set_ldt = (void *)rel->eip; + paravirt_ops.set_ldt = vmi_set_ldt; + } + + para_fill(load_gdt, SetGDT); + para_fill(load_idt, SetIDT); + para_fill(store_gdt, GetGDT); + para_fill(store_idt, GetIDT); + para_fill(store_tr, GetTR); + paravirt_ops.load_tls = vmi_load_tls; + para_fill(write_ldt_entry, WriteLDTEntry); + para_fill(write_gdt_entry, WriteGDTEntry); + para_fill(write_idt_entry, WriteIDTEntry); + reloc = call_vrom_long_func(vmi_rom, get_reloc, + VMI_CALL_UpdateKernelStack); + if (rel->type != VMI_RELOCATION_NONE) { + BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); + vmi_ops.set_kernel_stack = (void *)rel->eip; + paravirt_ops.load_esp0 = vmi_load_esp0; + } + + para_fill(set_iopl_mask, SetIOPLMask); + paravirt_ops.io_delay = (void *)vmi_nop; + if (!disable_nodelay) { + paravirt_ops.const_udelay = (void *)vmi_nop; + } + + para_fill(set_lazy_mode, SetLazyMode); + + reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_FlushTLB); + if (rel->type != VMI_RELOCATION_NONE) { + vmi_ops.flush_tlb = (void *)rel->eip; + paravirt_ops.flush_tlb_user = vmi_flush_tlb_user; + paravirt_ops.flush_tlb_kernel = vmi_flush_tlb_kernel; + } + para_fill(flush_tlb_single, InvalPage); + + /* + * Until a standard flag format can be agreed on, we need to + * implement these as wrappers in Linux. Get the VMI ROM + * function pointers for the two backend calls. + */ +#ifdef CONFIG_X86_PAE + vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxELong); + vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxELong); +#else + vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxE); + vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxE); +#endif + vmi_ops.set_linear_mapping = vmi_get_function(VMI_CALL_SetLinearMapping); + vmi_ops.allocate_page = vmi_get_function(VMI_CALL_AllocatePage); + vmi_ops.release_page = vmi_get_function(VMI_CALL_ReleasePage); + + paravirt_ops.alloc_pt = vmi_allocate_pt; + paravirt_ops.alloc_pd = vmi_allocate_pd; + paravirt_ops.alloc_pd_clone = vmi_allocate_pd_clone; + paravirt_ops.release_pt = vmi_release_pt; + paravirt_ops.release_pd = vmi_release_pd; + paravirt_ops.set_pte = vmi_set_pte; + paravirt_ops.set_pte_at = vmi_set_pte_at; + paravirt_ops.set_pmd = vmi_set_pmd; + paravirt_ops.pte_update = vmi_update_pte; + paravirt_ops.pte_update_defer = vmi_update_pte_defer; +#ifdef CONFIG_X86_PAE + paravirt_ops.set_pte_atomic = vmi_set_pte_atomic; + paravirt_ops.set_pte_present = vmi_set_pte_present; + paravirt_ops.set_pud = vmi_set_pud; + paravirt_ops.pte_clear = vmi_pte_clear; + paravirt_ops.pmd_clear = vmi_pmd_clear; +#endif + /* + * These MUST always be patched. Don't support indirect jumps + * through these operations, as the VMI interface may use either + * a jump or a call to get to these operations, depending on + * the backend. They are performance critical anyway, so requiring + * a patch is not a big problem. + */ + paravirt_ops.irq_enable_sysexit = (void *)0xfeedbab0; + paravirt_ops.iret = (void *)0xbadbab0; + +#ifdef CONFIG_SMP + paravirt_ops.startup_ipi_hook = vmi_startup_ipi_hook; + vmi_ops.set_initial_ap_state = vmi_get_function(VMI_CALL_SetInitialAPState); +#endif + +#ifdef CONFIG_X86_LOCAL_APIC + paravirt_ops.apic_read = vmi_get_function(VMI_CALL_APICRead); + paravirt_ops.apic_write = vmi_get_function(VMI_CALL_APICWrite); + paravirt_ops.apic_write_atomic = vmi_get_function(VMI_CALL_APICWrite); +#endif + + /* + * Check for VMI timer functionality by probing for a cycle frequency method + */ + reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_GetCycleFrequency); + if (rel->type != VMI_RELOCATION_NONE) { + vmi_timer_ops.get_cycle_frequency = (void *)rel->eip; + vmi_timer_ops.get_cycle_counter = + vmi_get_function(VMI_CALL_GetCycleCounter); + vmi_timer_ops.get_wallclock = + vmi_get_function(VMI_CALL_GetWallclockTime); + vmi_timer_ops.wallclock_updated = + vmi_get_function(VMI_CALL_WallclockUpdated); + vmi_timer_ops.set_alarm = vmi_get_function(VMI_CALL_SetAlarm); + vmi_timer_ops.cancel_alarm = + vmi_get_function(VMI_CALL_CancelAlarm); + paravirt_ops.time_init = vmi_time_init; + paravirt_ops.get_wallclock = vmi_get_wallclock; + paravirt_ops.set_wallclock = vmi_set_wallclock; +#ifdef CONFIG_X86_LOCAL_APIC + paravirt_ops.setup_boot_clock = vmi_timer_setup_boot_alarm; + paravirt_ops.setup_secondary_clock = vmi_timer_setup_secondary_alarm; +#endif + custom_sched_clock = vmi_sched_clock; + } + + /* + * Alternative instruction rewriting doesn't happen soon enough + * to convert VMI_IRET to a call instead of a jump; so we have + * to do this before IRQs get reenabled. Fortunately, it is + * idempotent. + */ + apply_paravirt(__start_parainstructions, __stop_parainstructions); + + vmi_bringup(); + + return 1; +} + +#undef para_fill + +void __init vmi_init(void) +{ + unsigned long flags; + + if (!vmi_rom) + probe_vmi_rom(); + else + check_vmi_rom(vmi_rom); + + /* In case probing for or validating the ROM failed, basil */ + if (!vmi_rom) + return; + + reserve_top_address(-vmi_rom->virtual_top); + + local_irq_save(flags); + activate_vmi(); +#ifdef CONFIG_SMP + no_timer_check = 1; +#endif + local_irq_restore(flags & X86_EFLAGS_IF); +} + +static int __init parse_vmi(char *arg) +{ + if (!arg) + return -EINVAL; + + if (!strcmp(arg, "disable_nodelay")) + disable_nodelay = 1; + else if (!strcmp(arg, "disable_pge")) { + clear_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability); + disable_pge = 1; + } else if (!strcmp(arg, "disable_pse")) { + clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability); + disable_pse = 1; + } else if (!strcmp(arg, "disable_sep")) { + clear_bit(X86_FEATURE_SEP, boot_cpu_data.x86_capability); + disable_sep = 1; + } else if (!strcmp(arg, "disable_tsc")) { + clear_bit(X86_FEATURE_TSC, boot_cpu_data.x86_capability); + disable_tsc = 1; + } else if (!strcmp(arg, "disable_mtrr")) { + clear_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability); + disable_mtrr = 1; + } + return 0; +} + +early_param("vmi", parse_vmi); diff --git a/arch/i386/kernel/vmitime.c b/arch/i386/kernel/vmitime.c new file mode 100644 index 00000000000..76d2adcae5a --- /dev/null +++ b/arch/i386/kernel/vmitime.c @@ -0,0 +1,499 @@ +/* + * VMI paravirtual timer support routines. + * + * Copyright (C) 2005, VMware, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to dhecht@vmware.com + * + */ + +/* + * Portions of this code from arch/i386/kernel/timers/timer_tsc.c. + * Portions of the CONFIG_NO_IDLE_HZ code from arch/s390/kernel/time.c. + * See comments there for proper credits. + */ + +#include <linux/spinlock.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/jiffies.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> +#include <linux/rcupdate.h> +#include <linux/clocksource.h> + +#include <asm/timer.h> +#include <asm/io.h> +#include <asm/apic.h> +#include <asm/div64.h> +#include <asm/timer.h> +#include <asm/desc.h> + +#include <asm/vmi.h> +#include <asm/vmi_time.h> + +#include <mach_timer.h> +#include <io_ports.h> + +#ifdef CONFIG_X86_LOCAL_APIC +#define VMI_ALARM_WIRING VMI_ALARM_WIRED_LVTT +#else +#define VMI_ALARM_WIRING VMI_ALARM_WIRED_IRQ0 +#endif + +/* Cached VMI operations */ +struct vmi_timer_ops vmi_timer_ops; + +#ifdef CONFIG_NO_IDLE_HZ + +/* /proc/sys/kernel/hz_timer state. */ +int sysctl_hz_timer; + +/* Some stats */ +static DEFINE_PER_CPU(unsigned long, vmi_idle_no_hz_irqs); +static DEFINE_PER_CPU(unsigned long, vmi_idle_no_hz_jiffies); +static DEFINE_PER_CPU(unsigned long, idle_start_jiffies); + +#endif /* CONFIG_NO_IDLE_HZ */ + +/* Number of alarms per second. By default this is CONFIG_VMI_ALARM_HZ. */ +static int alarm_hz = CONFIG_VMI_ALARM_HZ; + +/* Cache of the value get_cycle_frequency / HZ. */ +static signed long long cycles_per_jiffy; + +/* Cache of the value get_cycle_frequency / alarm_hz. */ +static signed long long cycles_per_alarm; + +/* The number of cycles accounted for by the 'jiffies'/'xtime' count. + * Protected by xtime_lock. */ +static unsigned long long real_cycles_accounted_system; + +/* The number of cycles accounted for by update_process_times(), per cpu. */ +static DEFINE_PER_CPU(unsigned long long, process_times_cycles_accounted_cpu); + +/* The number of stolen cycles accounted, per cpu. */ +static DEFINE_PER_CPU(unsigned long long, stolen_cycles_accounted_cpu); + +/* Clock source. */ +static cycle_t read_real_cycles(void) +{ + return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL); +} + +static cycle_t read_available_cycles(void) +{ + return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE); +} + +#if 0 +static cycle_t read_stolen_cycles(void) +{ + return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_STOLEN); +} +#endif /* 0 */ + +static struct clocksource clocksource_vmi = { + .name = "vmi-timer", + .rating = 450, + .read = read_real_cycles, + .mask = CLOCKSOURCE_MASK(64), + .mult = 0, /* to be set */ + .shift = 22, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + + +/* Timer interrupt handler. */ +static irqreturn_t vmi_timer_interrupt(int irq, void *dev_id); + +static struct irqaction vmi_timer_irq = { + vmi_timer_interrupt, + SA_INTERRUPT, + CPU_MASK_NONE, + "VMI-alarm", + NULL, + NULL +}; + +/* Alarm rate */ +static int __init vmi_timer_alarm_rate_setup(char* str) +{ + int alarm_rate; + if (get_option(&str, &alarm_rate) == 1 && alarm_rate > 0) { + alarm_hz = alarm_rate; + printk(KERN_WARNING "VMI timer alarm HZ set to %d\n", alarm_hz); + } + return 1; +} +__setup("vmi_timer_alarm_hz=", vmi_timer_alarm_rate_setup); + + +/* Initialization */ +static void vmi_get_wallclock_ts(struct timespec *ts) +{ + unsigned long long wallclock; + wallclock = vmi_timer_ops.get_wallclock(); // nsec units + ts->tv_nsec = do_div(wallclock, 1000000000); + ts->tv_sec = wallclock; +} + +static void update_xtime_from_wallclock(void) +{ + struct timespec ts; + vmi_get_wallclock_ts(&ts); + do_settimeofday(&ts); +} + +unsigned long vmi_get_wallclock(void) +{ + struct timespec ts; + vmi_get_wallclock_ts(&ts); + return ts.tv_sec; +} + +int vmi_set_wallclock(unsigned long now) +{ + return -1; +} + +unsigned long long vmi_sched_clock(void) +{ + return read_available_cycles(); +} + +void __init vmi_time_init(void) +{ + unsigned long long cycles_per_sec, cycles_per_msec; + unsigned long flags; + + local_irq_save(flags); + setup_irq(0, &vmi_timer_irq); +#ifdef CONFIG_X86_LOCAL_APIC + set_intr_gate(LOCAL_TIMER_VECTOR, apic_vmi_timer_interrupt); +#endif + + no_sync_cmos_clock = 1; + + vmi_get_wallclock_ts(&xtime); + set_normalized_timespec(&wall_to_monotonic, + -xtime.tv_sec, -xtime.tv_nsec); + + real_cycles_accounted_system = read_real_cycles(); + update_xtime_from_wallclock(); + per_cpu(process_times_cycles_accounted_cpu, 0) = read_available_cycles(); + + cycles_per_sec = vmi_timer_ops.get_cycle_frequency(); + + cycles_per_jiffy = cycles_per_sec; + (void)do_div(cycles_per_jiffy, HZ); + cycles_per_alarm = cycles_per_sec; + (void)do_div(cycles_per_alarm, alarm_hz); + cycles_per_msec = cycles_per_sec; + (void)do_div(cycles_per_msec, 1000); + cpu_khz = cycles_per_msec; + + printk(KERN_WARNING "VMI timer cycles/sec = %llu ; cycles/jiffy = %llu ;" + "cycles/alarm = %llu\n", cycles_per_sec, cycles_per_jiffy, + cycles_per_alarm); + + clocksource_vmi.mult = clocksource_khz2mult(cycles_per_msec, + clocksource_vmi.shift); + if (clocksource_register(&clocksource_vmi)) + printk(KERN_WARNING "Error registering VMITIME clocksource."); + + /* Disable PIT. */ + outb_p(0x3a, PIT_MODE); /* binary, mode 5, LSB/MSB, ch 0 */ + + /* schedule the alarm. do this in phase with process_times_cycles_accounted_cpu + * reduce the latency calling update_process_times. */ + vmi_timer_ops.set_alarm( + VMI_ALARM_WIRED_IRQ0 | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, + per_cpu(process_times_cycles_accounted_cpu, 0) + cycles_per_alarm, + cycles_per_alarm); + + local_irq_restore(flags); +} + +#ifdef CONFIG_X86_LOCAL_APIC + +void __init vmi_timer_setup_boot_alarm(void) +{ + local_irq_disable(); + + /* Route the interrupt to the correct vector. */ + apic_write_around(APIC_LVTT, LOCAL_TIMER_VECTOR); + + /* Cancel the IRQ0 wired alarm, and setup the LVTT alarm. */ + vmi_timer_ops.cancel_alarm(VMI_CYCLES_AVAILABLE); + vmi_timer_ops.set_alarm( + VMI_ALARM_WIRED_LVTT | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, + per_cpu(process_times_cycles_accounted_cpu, 0) + cycles_per_alarm, + cycles_per_alarm); + local_irq_enable(); +} + +/* Initialize the time accounting variables for an AP on an SMP system. + * Also, set the local alarm for the AP. */ +void __init vmi_timer_setup_secondary_alarm(void) +{ + int cpu = smp_processor_id(); + + /* Route the interrupt to the correct vector. */ + apic_write_around(APIC_LVTT, LOCAL_TIMER_VECTOR); + + per_cpu(process_times_cycles_accounted_cpu, cpu) = read_available_cycles(); + + vmi_timer_ops.set_alarm( + VMI_ALARM_WIRED_LVTT | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, + per_cpu(process_times_cycles_accounted_cpu, cpu) + cycles_per_alarm, + cycles_per_alarm); +} + +#endif + +/* Update system wide (real) time accounting (e.g. jiffies, xtime). */ +static void vmi_account_real_cycles(unsigned long long cur_real_cycles) +{ + long long cycles_not_accounted; + + write_seqlock(&xtime_lock); + + cycles_not_accounted = cur_real_cycles - real_cycles_accounted_system; + while (cycles_not_accounted >= cycles_per_jiffy) { + /* systems wide jiffies and wallclock. */ + do_timer(1); + + cycles_not_accounted -= cycles_per_jiffy; + real_cycles_accounted_system += cycles_per_jiffy; + } + + if (vmi_timer_ops.wallclock_updated()) + update_xtime_from_wallclock(); + + write_sequnlock(&xtime_lock); +} + +/* Update per-cpu process times. */ +static void vmi_account_process_times_cycles(struct pt_regs *regs, int cpu, + unsigned long long cur_process_times_cycles) +{ + long long cycles_not_accounted; + cycles_not_accounted = cur_process_times_cycles - + per_cpu(process_times_cycles_accounted_cpu, cpu); + + while (cycles_not_accounted >= cycles_per_jiffy) { + /* Account time to the current process. This includes + * calling into the scheduler to decrement the timeslice + * and possibly reschedule.*/ + update_process_times(user_mode(regs)); + /* XXX handle /proc/profile multiplier. */ + profile_tick(CPU_PROFILING); + + cycles_not_accounted -= cycles_per_jiffy; + per_cpu(process_times_cycles_accounted_cpu, cpu) += cycles_per_jiffy; + } +} + +#ifdef CONFIG_NO_IDLE_HZ +/* Update per-cpu idle times. Used when a no-hz halt is ended. */ +static void vmi_account_no_hz_idle_cycles(int cpu, + unsigned long long cur_process_times_cycles) +{ + long long cycles_not_accounted; + unsigned long no_idle_hz_jiffies = 0; + + cycles_not_accounted = cur_process_times_cycles - + per_cpu(process_times_cycles_accounted_cpu, cpu); + + while (cycles_not_accounted >= cycles_per_jiffy) { + no_idle_hz_jiffies++; + cycles_not_accounted -= cycles_per_jiffy; + per_cpu(process_times_cycles_accounted_cpu, cpu) += cycles_per_jiffy; + } + /* Account time to the idle process. */ + account_steal_time(idle_task(cpu), jiffies_to_cputime(no_idle_hz_jiffies)); +} +#endif + +/* Update per-cpu stolen time. */ +static void vmi_account_stolen_cycles(int cpu, + unsigned long long cur_real_cycles, + unsigned long long cur_avail_cycles) +{ + long long stolen_cycles_not_accounted; + unsigned long stolen_jiffies = 0; + + if (cur_real_cycles < cur_avail_cycles) + return; + + stolen_cycles_not_accounted = cur_real_cycles - cur_avail_cycles - + per_cpu(stolen_cycles_accounted_cpu, cpu); + + while (stolen_cycles_not_accounted >= cycles_per_jiffy) { + stolen_jiffies++; + stolen_cycles_not_accounted -= cycles_per_jiffy; + per_cpu(stolen_cycles_accounted_cpu, cpu) += cycles_per_jiffy; + } + /* HACK: pass NULL to force time onto cpustat->steal. */ + account_steal_time(NULL, jiffies_to_cputime(stolen_jiffies)); +} + +/* Body of either IRQ0 interrupt handler (UP no local-APIC) or + * local-APIC LVTT interrupt handler (UP & local-APIC or SMP). */ +static void vmi_local_timer_interrupt(int cpu) +{ + unsigned long long cur_real_cycles, cur_process_times_cycles; + + cur_real_cycles = read_real_cycles(); + cur_process_times_cycles = read_available_cycles(); + /* Update system wide (real) time state (xtime, jiffies). */ + vmi_account_real_cycles(cur_real_cycles); + /* Update per-cpu process times. */ + vmi_account_process_times_cycles(get_irq_regs(), cpu, cur_process_times_cycles); + /* Update time stolen from this cpu by the hypervisor. */ + vmi_account_stolen_cycles(cpu, cur_real_cycles, cur_process_times_cycles); +} + +#ifdef CONFIG_NO_IDLE_HZ + +/* Must be called only from idle loop, with interrupts disabled. */ +int vmi_stop_hz_timer(void) +{ + /* Note that cpu_set, cpu_clear are (SMP safe) atomic on x86. */ + + unsigned long seq, next; + unsigned long long real_cycles_expiry; + int cpu = smp_processor_id(); + int idle; + + BUG_ON(!irqs_disabled()); + if (sysctl_hz_timer != 0) + return 0; + + cpu_set(cpu, nohz_cpu_mask); + smp_mb(); + if (rcu_needs_cpu(cpu) || local_softirq_pending() || + (next = next_timer_interrupt(), time_before_eq(next, jiffies))) { + cpu_clear(cpu, nohz_cpu_mask); + next = jiffies; + idle = 0; + } else + idle = 1; + + /* Convert jiffies to the real cycle counter. */ + do { + seq = read_seqbegin(&xtime_lock); + real_cycles_expiry = real_cycles_accounted_system + + (long)(next - jiffies) * cycles_per_jiffy; + } while (read_seqretry(&xtime_lock, seq)); + + /* This cpu is going idle. Disable the periodic alarm. */ + if (idle) { + vmi_timer_ops.cancel_alarm(VMI_CYCLES_AVAILABLE); + per_cpu(idle_start_jiffies, cpu) = jiffies; + } + + /* Set the real time alarm to expire at the next event. */ + vmi_timer_ops.set_alarm( + VMI_ALARM_WIRING | VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL, + real_cycles_expiry, 0); + + return idle; +} + +static void vmi_reenable_hz_timer(int cpu) +{ + /* For /proc/vmi/info idle_hz stat. */ + per_cpu(vmi_idle_no_hz_jiffies, cpu) += jiffies - per_cpu(idle_start_jiffies, cpu); + per_cpu(vmi_idle_no_hz_irqs, cpu)++; + + /* Don't bother explicitly cancelling the one-shot alarm -- at + * worse we will receive a spurious timer interrupt. */ + vmi_timer_ops.set_alarm( + VMI_ALARM_WIRING | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE, + per_cpu(process_times_cycles_accounted_cpu, cpu) + cycles_per_alarm, + cycles_per_alarm); + /* Indicate this cpu is no longer nohz idle. */ + cpu_clear(cpu, nohz_cpu_mask); +} + +/* Called from interrupt handlers when (local) HZ timer is disabled. */ +void vmi_account_time_restart_hz_timer(void) +{ + unsigned long long cur_real_cycles, cur_process_times_cycles; + int cpu = smp_processor_id(); + + BUG_ON(!irqs_disabled()); + /* Account the time during which the HZ timer was disabled. */ + cur_real_cycles = read_real_cycles(); + cur_process_times_cycles = read_available_cycles(); + /* Update system wide (real) time state (xtime, jiffies). */ + vmi_account_real_cycles(cur_real_cycles); + /* Update per-cpu idle times. */ + vmi_account_no_hz_idle_cycles(cpu, cur_process_times_cycles); + /* Update time stolen from this cpu by the hypervisor. */ + vmi_account_stolen_cycles(cpu, cur_real_cycles, cur_process_times_cycles); + /* Reenable the hz timer. */ + vmi_reenable_hz_timer(cpu); +} + +#endif /* CONFIG_NO_IDLE_HZ */ + +/* UP (and no local-APIC) VMI-timer alarm interrupt handler. + * Handler for IRQ0. Not used when SMP or X86_LOCAL_APIC after + * APIC setup and setup_boot_vmi_alarm() is called. */ +static irqreturn_t vmi_timer_interrupt(int irq, void *dev_id) +{ + vmi_local_timer_interrupt(smp_processor_id()); + return IRQ_HANDLED; +} + +#ifdef CONFIG_X86_LOCAL_APIC + +/* SMP VMI-timer alarm interrupt handler. Handler for LVTT vector. + * Also used in UP when CONFIG_X86_LOCAL_APIC. + * The wrapper code is from arch/i386/kernel/apic.c#smp_apic_timer_interrupt. */ +void smp_apic_vmi_timer_interrupt(struct pt_regs *regs) +{ + struct pt_regs *old_regs = set_irq_regs(regs); + int cpu = smp_processor_id(); + + /* + * the NMI deadlock-detector uses this. + */ + per_cpu(irq_stat,cpu).apic_timer_irqs++; + + /* + * NOTE! We'd better ACK the irq immediately, + * because timer handling can be slow. + */ + ack_APIC_irq(); + + /* + * update_process_times() expects us to have done irq_enter(). + * Besides, if we don't timer interrupts ignore the global + * interrupt lock, which is the WrongThing (tm) to do. + */ + irq_enter(); + vmi_local_timer_interrupt(cpu); + irq_exit(); + set_irq_regs(old_regs); +} + +#endif /* CONFIG_X86_LOCAL_APIC */ diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S index 5038a73d554..ca51610955d 100644 --- a/arch/i386/kernel/vmlinux.lds.S +++ b/arch/i386/kernel/vmlinux.lds.S @@ -37,9 +37,14 @@ SECTIONS { . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR; phys_startup_32 = startup_32 - LOAD_OFFSET; + + .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) { + _text = .; /* Text and read-only data */ + *(.text.head) + } :text = 0x9090 + /* read-only */ .text : AT(ADDR(.text) - LOAD_OFFSET) { - _text = .; /* Text and read-only data */ *(.text) SCHED_TEXT LOCK_TEXT diff --git a/arch/i386/mach-default/setup.c b/arch/i386/mach-default/setup.c index cc2f519b2f7..c7881621070 100644 --- a/arch/i386/mach-default/setup.c +++ b/arch/i386/mach-default/setup.c @@ -79,7 +79,12 @@ void __init trap_init_hook(void) { } -static struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL}; +static struct irqaction irq0 = { + .handler = timer_interrupt, + .flags = IRQF_DISABLED | IRQF_NOBALANCING, + .mask = CPU_MASK_NONE, + .name = "timer" +}; /** * time_init_hook - do any specific initialisations for the system timer. @@ -90,6 +95,7 @@ static struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, **/ void __init time_init_hook(void) { + irq0.mask = cpumask_of_cpu(0); setup_irq(0, &irq0); } diff --git a/arch/i386/math-emu/get_address.c b/arch/i386/math-emu/get_address.c index 9819b705efa..2e2c51a8bd3 100644 --- a/arch/i386/math-emu/get_address.c +++ b/arch/i386/math-emu/get_address.c @@ -56,15 +56,14 @@ static int reg_offset_vm86[] = { #define VM86_REG_(x) (*(unsigned short *) \ (reg_offset_vm86[((unsigned)x)]+(u_char *) FPU_info)) -/* These are dummy, fs and gs are not saved on the stack. */ -#define ___FS ___ds +/* This dummy, gs is not saved on the stack. */ #define ___GS ___ds static int reg_offset_pm[] = { offsetof(struct info,___cs), offsetof(struct info,___ds), offsetof(struct info,___es), - offsetof(struct info,___FS), + offsetof(struct info,___fs), offsetof(struct info,___GS), offsetof(struct info,___ss), offsetof(struct info,___ds) @@ -169,13 +168,10 @@ static long pm_address(u_char FPU_modrm, u_char segment, switch ( segment ) { - /* fs and gs aren't used by the kernel, so they still have their - user-space values. */ - case PREFIX_FS_-1: - /* N.B. - movl %seg, mem is a 2 byte write regardless of prefix */ - savesegment(fs, addr->selector); - break; + /* gs isn't used by the kernel, so it still has its + user-space value. */ case PREFIX_GS_-1: + /* N.B. - movl %seg, mem is a 2 byte write regardless of prefix */ savesegment(gs, addr->selector); break; default: diff --git a/arch/i386/math-emu/status_w.h b/arch/i386/math-emu/status_w.h index 78d7b7689dd..59e73302aa6 100644 --- a/arch/i386/math-emu/status_w.h +++ b/arch/i386/math-emu/status_w.h @@ -48,9 +48,11 @@ #define status_word() \ ((partial_status & ~SW_Top & 0xffff) | ((top << SW_Top_Shift) & SW_Top)) -#define setcc(cc) ({ \ - partial_status &= ~(SW_C0|SW_C1|SW_C2|SW_C3); \ - partial_status |= (cc) & (SW_C0|SW_C1|SW_C2|SW_C3); }) +static inline void setcc(int cc) +{ + partial_status &= ~(SW_C0|SW_C1|SW_C2|SW_C3); + partial_status |= (cc) & (SW_C0|SW_C1|SW_C2|SW_C3); +} #ifdef PECULIAR_486 /* Default, this conveys no information, but an 80486 does it. */ diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c index e0c390d6ceb..aa58720f687 100644 --- a/arch/i386/mm/discontig.c +++ b/arch/i386/mm/discontig.c @@ -101,7 +101,6 @@ extern void find_max_pfn(void); extern void add_one_highpage_init(struct page *, int, int); extern struct e820map e820; -extern unsigned long init_pg_tables_end; extern unsigned long highend_pfn, highstart_pfn; extern unsigned long max_low_pfn; extern unsigned long totalram_pages; diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c index cba9b3894a3..b8c4e259fc8 100644 --- a/arch/i386/mm/fault.c +++ b/arch/i386/mm/fault.c @@ -46,17 +46,17 @@ int unregister_page_fault_notifier(struct notifier_block *nb) } EXPORT_SYMBOL_GPL(unregister_page_fault_notifier); -static inline int notify_page_fault(enum die_val val, const char *str, - struct pt_regs *regs, long err, int trap, int sig) +static inline int notify_page_fault(struct pt_regs *regs, long err) { struct die_args args = { .regs = regs, - .str = str, + .str = "page fault", .err = err, - .trapnr = trap, - .signr = sig + .trapnr = 14, + .signr = SIGSEGV }; - return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); + return atomic_notifier_call_chain(¬ify_page_fault_chain, + DIE_PAGE_FAULT, &args); } /* @@ -327,8 +327,7 @@ fastcall void __kprobes do_page_fault(struct pt_regs *regs, if (unlikely(address >= TASK_SIZE)) { if (!(error_code & 0x0000000d) && vmalloc_fault(address) >= 0) return; - if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, - SIGSEGV) == NOTIFY_STOP) + if (notify_page_fault(regs, error_code) == NOTIFY_STOP) return; /* * Don't take the mm semaphore here. If we fixup a prefetch @@ -337,8 +336,7 @@ fastcall void __kprobes do_page_fault(struct pt_regs *regs, goto bad_area_nosemaphore; } - if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, - SIGSEGV) == NOTIFY_STOP) + if (notify_page_fault(regs, error_code) == NOTIFY_STOP) return; /* It's safe to allow irq's after cr2 has been saved and the vmalloc diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c index c5c5ea700cc..ae436882af7 100644 --- a/arch/i386/mm/init.c +++ b/arch/i386/mm/init.c @@ -62,6 +62,7 @@ static pmd_t * __init one_md_table_init(pgd_t *pgd) #ifdef CONFIG_X86_PAE pmd_table = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE); + paravirt_alloc_pd(__pa(pmd_table) >> PAGE_SHIFT); set_pgd(pgd, __pgd(__pa(pmd_table) | _PAGE_PRESENT)); pud = pud_offset(pgd, 0); if (pmd_table != pmd_offset(pud, 0)) @@ -82,6 +83,7 @@ static pte_t * __init one_page_table_init(pmd_t *pmd) { if (pmd_none(*pmd)) { pte_t *page_table = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); + paravirt_alloc_pt(__pa(page_table) >> PAGE_SHIFT); set_pmd(pmd, __pmd(__pa(page_table) | _PAGE_TABLE)); if (page_table != pte_offset_kernel(pmd, 0)) BUG(); @@ -345,6 +347,8 @@ static void __init pagetable_init (void) /* Init entries of the first-level page table to the zero page */ for (i = 0; i < PTRS_PER_PGD; i++) set_pgd(pgd_base + i, __pgd(__pa(empty_zero_page) | _PAGE_PRESENT)); +#else + paravirt_alloc_pd(__pa(swapper_pg_dir) >> PAGE_SHIFT); #endif /* Enable PSE if available */ diff --git a/arch/i386/mm/pageattr.c b/arch/i386/mm/pageattr.c index e223b1d4981..412ebbd8adb 100644 --- a/arch/i386/mm/pageattr.c +++ b/arch/i386/mm/pageattr.c @@ -60,6 +60,7 @@ static struct page *split_large_page(unsigned long address, pgprot_t prot, address = __pa(address); addr = address & LARGE_PAGE_MASK; pbase = (pte_t *)page_address(base); + paravirt_alloc_pt(page_to_pfn(base)); for (i = 0; i < PTRS_PER_PTE; i++, addr += PAGE_SIZE) { set_pte(&pbase[i], pfn_pte(addr >> PAGE_SHIFT, addr == address ? prot : ref_prot)); @@ -172,6 +173,7 @@ __change_page_attr(struct page *page, pgprot_t prot) if (!PageReserved(kpte_page)) { if (cpu_has_pse && (page_private(kpte_page) == 0)) { ClearPagePrivate(kpte_page); + paravirt_release_pt(page_to_pfn(kpte_page)); list_add(&kpte_page->lru, &df_list); revert_page(kpte_page, address); } diff --git a/arch/i386/mm/pgtable.c b/arch/i386/mm/pgtable.c index f349eaf450b..fa0cfbd551e 100644 --- a/arch/i386/mm/pgtable.c +++ b/arch/i386/mm/pgtable.c @@ -171,6 +171,8 @@ void __set_fixmap (enum fixed_addresses idx, unsigned long phys, pgprot_t flags) void reserve_top_address(unsigned long reserve) { BUG_ON(fixmaps > 0); + printk(KERN_INFO "Reserving virtual address space above 0x%08x\n", + (int)-reserve); #ifdef CONFIG_COMPAT_VDSO BUG_ON(reserve != 0); #else @@ -248,9 +250,15 @@ void pgd_ctor(void *pgd, struct kmem_cache *cache, unsigned long unused) clone_pgd_range((pgd_t *)pgd + USER_PTRS_PER_PGD, swapper_pg_dir + USER_PTRS_PER_PGD, KERNEL_PGD_PTRS); + if (PTRS_PER_PMD > 1) return; + /* must happen under lock */ + paravirt_alloc_pd_clone(__pa(pgd) >> PAGE_SHIFT, + __pa(swapper_pg_dir) >> PAGE_SHIFT, + USER_PTRS_PER_PGD, PTRS_PER_PGD - USER_PTRS_PER_PGD); + pgd_list_add(pgd); spin_unlock_irqrestore(&pgd_lock, flags); } @@ -260,6 +268,7 @@ void pgd_dtor(void *pgd, struct kmem_cache *cache, unsigned long unused) { unsigned long flags; /* can be called from interrupt context */ + paravirt_release_pd(__pa(pgd) >> PAGE_SHIFT); spin_lock_irqsave(&pgd_lock, flags); pgd_list_del(pgd); spin_unlock_irqrestore(&pgd_lock, flags); @@ -277,13 +286,18 @@ pgd_t *pgd_alloc(struct mm_struct *mm) pmd_t *pmd = kmem_cache_alloc(pmd_cache, GFP_KERNEL); if (!pmd) goto out_oom; + paravirt_alloc_pd(__pa(pmd) >> PAGE_SHIFT); set_pgd(&pgd[i], __pgd(1 + __pa(pmd))); } return pgd; out_oom: - for (i--; i >= 0; i--) - kmem_cache_free(pmd_cache, (void *)__va(pgd_val(pgd[i])-1)); + for (i--; i >= 0; i--) { + pgd_t pgdent = pgd[i]; + void* pmd = (void *)__va(pgd_val(pgdent)-1); + paravirt_release_pd(__pa(pmd) >> PAGE_SHIFT); + kmem_cache_free(pmd_cache, pmd); + } kmem_cache_free(pgd_cache, pgd); return NULL; } @@ -294,8 +308,12 @@ void pgd_free(pgd_t *pgd) /* in the PAE case user pgd entries are overwritten before usage */ if (PTRS_PER_PMD > 1) - for (i = 0; i < USER_PTRS_PER_PGD; ++i) - kmem_cache_free(pmd_cache, (void *)__va(pgd_val(pgd[i])-1)); + for (i = 0; i < USER_PTRS_PER_PGD; ++i) { + pgd_t pgdent = pgd[i]; + void* pmd = (void *)__va(pgd_val(pgdent)-1); + paravirt_release_pd(__pa(pmd) >> PAGE_SHIFT); + kmem_cache_free(pmd_cache, pmd); + } /* in the non-PAE case, free_pgtables() clears user pgd entries */ kmem_cache_free(pgd_cache, pgd); } diff --git a/arch/i386/oprofile/op_model_ppro.c b/arch/i386/oprofile/op_model_ppro.c index ca2447e05e1..c554f52cb80 100644 --- a/arch/i386/oprofile/op_model_ppro.c +++ b/arch/i386/oprofile/op_model_ppro.c @@ -24,7 +24,8 @@ #define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0) #define CTR_READ(l,h,msrs,c) do {rdmsr(msrs->counters[(c)].addr, (l), (h));} while (0) -#define CTR_WRITE(l,msrs,c) do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), -1);} while (0) +#define CTR_32BIT_WRITE(l,msrs,c) \ + do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), 0);} while (0) #define CTR_OVERFLOWED(n) (!((n) & (1U<<31))) #define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0) @@ -79,7 +80,7 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) for (i = 0; i < NUM_COUNTERS; ++i) { if (unlikely(!CTR_IS_RESERVED(msrs,i))) continue; - CTR_WRITE(1, msrs, i); + CTR_32BIT_WRITE(1, msrs, i); } /* enable active counters */ @@ -87,7 +88,7 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs,i))) { reset_value[i] = counter_config[i].count; - CTR_WRITE(counter_config[i].count, msrs, i); + CTR_32BIT_WRITE(counter_config[i].count, msrs, i); CTRL_READ(low, high, msrs, i); CTRL_CLEAR(low); @@ -116,7 +117,7 @@ static int ppro_check_ctrs(struct pt_regs * const regs, CTR_READ(low, high, msrs, i); if (CTR_OVERFLOWED(low)) { oprofile_add_sample(regs, i); - CTR_WRITE(reset_value[i], msrs, i); + CTR_32BIT_WRITE(reset_value[i], msrs, i); } } diff --git a/arch/i386/pci/Makefile b/arch/i386/pci/Makefile index 1594d2f55c8..44650e03308 100644 --- a/arch/i386/pci/Makefile +++ b/arch/i386/pci/Makefile @@ -1,7 +1,7 @@ obj-y := i386.o init.o obj-$(CONFIG_PCI_BIOS) += pcbios.o -obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o +obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o obj-$(CONFIG_PCI_DIRECT) += direct.o pci-y := fixup.o diff --git a/arch/i386/pci/mmconfig-shared.c b/arch/i386/pci/mmconfig-shared.c new file mode 100644 index 00000000000..747d8c63b0c --- /dev/null +++ b/arch/i386/pci/mmconfig-shared.c @@ -0,0 +1,264 @@ +/* + * mmconfig-shared.c - Low-level direct PCI config space access via + * MMCONFIG - common code between i386 and x86-64. + * + * This code does: + * - known chipset handling + * - ACPI decoding and validation + * + * Per-architecture code takes care of the mappings and accesses + * themselves. + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/acpi.h> +#include <linux/bitmap.h> +#include <asm/e820.h> + +#include "pci.h" + +/* aperture is up to 256MB but BIOS may reserve less */ +#define MMCONFIG_APER_MIN (2 * 1024*1024) +#define MMCONFIG_APER_MAX (256 * 1024*1024) + +DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); + +/* K8 systems have some devices (typically in the builtin northbridge) + that are only accessible using type1 + Normally this can be expressed in the MCFG by not listing them + and assigning suitable _SEGs, but this isn't implemented in some BIOS. + Instead try to discover all devices on bus 0 that are unreachable using MM + and fallback for them. */ +static void __init unreachable_devices(void) +{ + int i, bus; + /* Use the max bus number from ACPI here? */ + for (bus = 0; bus < PCI_MMCFG_MAX_CHECK_BUS; bus++) { + for (i = 0; i < 32; i++) { + unsigned int devfn = PCI_DEVFN(i, 0); + u32 val1, val2; + + pci_conf1_read(0, bus, devfn, 0, 4, &val1); + if (val1 == 0xffffffff) + continue; + + if (pci_mmcfg_arch_reachable(0, bus, devfn)) { + raw_pci_ops->read(0, bus, devfn, 0, 4, &val2); + if (val1 == val2) + continue; + } + set_bit(i + 32 * bus, pci_mmcfg_fallback_slots); + printk(KERN_NOTICE "PCI: No mmconfig possible on device" + " %02x:%02x\n", bus, i); + } + } +} + +static const char __init *pci_mmcfg_e7520(void) +{ + u32 win; + pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win); + + pci_mmcfg_config_num = 1; + pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL); + if (!pci_mmcfg_config) + return NULL; + pci_mmcfg_config[0].address = (win & 0xf000) << 16; + pci_mmcfg_config[0].pci_segment = 0; + pci_mmcfg_config[0].start_bus_number = 0; + pci_mmcfg_config[0].end_bus_number = 255; + + return "Intel Corporation E7520 Memory Controller Hub"; +} + +static const char __init *pci_mmcfg_intel_945(void) +{ + u32 pciexbar, mask = 0, len = 0; + + pci_mmcfg_config_num = 1; + + pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0x48, 4, &pciexbar); + + /* Enable bit */ + if (!(pciexbar & 1)) + pci_mmcfg_config_num = 0; + + /* Size bits */ + switch ((pciexbar >> 1) & 3) { + case 0: + mask = 0xf0000000U; + len = 0x10000000U; + break; + case 1: + mask = 0xf8000000U; + len = 0x08000000U; + break; + case 2: + mask = 0xfc000000U; + len = 0x04000000U; + break; + default: + pci_mmcfg_config_num = 0; + } + + /* Errata #2, things break when not aligned on a 256Mb boundary */ + /* Can only happen in 64M/128M mode */ + + if ((pciexbar & mask) & 0x0fffffffU) + pci_mmcfg_config_num = 0; + + if (pci_mmcfg_config_num) { + pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL); + if (!pci_mmcfg_config) + return NULL; + pci_mmcfg_config[0].address = pciexbar & mask; + pci_mmcfg_config[0].pci_segment = 0; + pci_mmcfg_config[0].start_bus_number = 0; + pci_mmcfg_config[0].end_bus_number = (len >> 20) - 1; + } + + return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub"; +} + +struct pci_mmcfg_hostbridge_probe { + u32 vendor; + u32 device; + const char *(*probe)(void); +}; + +static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = { + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 }, +}; + +static int __init pci_mmcfg_check_hostbridge(void) +{ + u32 l; + u16 vendor, device; + int i; + const char *name; + + pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0, 4, &l); + vendor = l & 0xffff; + device = (l >> 16) & 0xffff; + + pci_mmcfg_config_num = 0; + pci_mmcfg_config = NULL; + name = NULL; + + for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) { + if (pci_mmcfg_probes[i].vendor == vendor && + pci_mmcfg_probes[i].device == device) + name = pci_mmcfg_probes[i].probe(); + } + + if (name) { + printk(KERN_INFO "PCI: Found %s %s MMCONFIG support.\n", + name, pci_mmcfg_config_num ? "with" : "without"); + } + + return name != NULL; +} + +static void __init pci_mmcfg_insert_resources(void) +{ +#define PCI_MMCFG_RESOURCE_NAME_LEN 19 + int i; + struct resource *res; + char *names; + unsigned num_buses; + + res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res), + pci_mmcfg_config_num, GFP_KERNEL); + if (!res) { + printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n"); + return; + } + + names = (void *)&res[pci_mmcfg_config_num]; + for (i = 0; i < pci_mmcfg_config_num; i++, res++) { + struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[i]; + num_buses = cfg->end_bus_number - cfg->start_bus_number + 1; + res->name = names; + snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u", + cfg->pci_segment); + res->start = cfg->address; + res->end = res->start + (num_buses << 20) - 1; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + insert_resource(&iomem_resource, res); + names += PCI_MMCFG_RESOURCE_NAME_LEN; + } +} + +static void __init pci_mmcfg_reject_broken(int type) +{ + typeof(pci_mmcfg_config[0]) *cfg; + + if ((pci_mmcfg_config_num == 0) || + (pci_mmcfg_config == NULL) || + (pci_mmcfg_config[0].address == 0)) + return; + + cfg = &pci_mmcfg_config[0]; + + /* + * Handle more broken MCFG tables on Asus etc. + * They only contain a single entry for bus 0-0. + */ + if (pci_mmcfg_config_num == 1 && + cfg->pci_segment == 0 && + (cfg->start_bus_number | cfg->end_bus_number) == 0) { + printk(KERN_ERR "PCI: start and end of bus number is 0. " + "Rejected as broken MCFG.\n"); + goto reject; + } + + /* + * Only do this check when type 1 works. If it doesn't work + * assume we run on a Mac and always use MCFG + */ + if (type == 1 && !e820_all_mapped(cfg->address, + cfg->address + MMCONFIG_APER_MIN, + E820_RESERVED)) { + printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not" + " E820-reserved\n", cfg->address); + goto reject; + } + return; + +reject: + printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); + kfree(pci_mmcfg_config); + pci_mmcfg_config = NULL; + pci_mmcfg_config_num = 0; +} + +void __init pci_mmcfg_init(int type) +{ + int known_bridge = 0; + + if ((pci_probe & PCI_PROBE_MMCONF) == 0) + return; + + if (type == 1 && pci_mmcfg_check_hostbridge()) + known_bridge = 1; + + if (!known_bridge) { + acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); + pci_mmcfg_reject_broken(type); + } + + if ((pci_mmcfg_config_num == 0) || + (pci_mmcfg_config == NULL) || + (pci_mmcfg_config[0].address == 0)) + return; + + if (pci_mmcfg_arch_init()) { + if (type == 1) + unreachable_devices(); + if (known_bridge) + pci_mmcfg_insert_resources(); + pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; + } +} diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index 5700220dcf5..bb1afd9e589 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -15,55 +15,33 @@ #include <asm/e820.h> #include "pci.h" -/* aperture is up to 256MB but BIOS may reserve less */ -#define MMCONFIG_APER_MIN (2 * 1024*1024) -#define MMCONFIG_APER_MAX (256 * 1024*1024) - /* Assume systems with more busses have correct MCFG */ -#define MAX_CHECK_BUS 16 - #define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG)) /* The base address of the last MMCONFIG device accessed */ static u32 mmcfg_last_accessed_device; static int mmcfg_last_accessed_cpu; -static DECLARE_BITMAP(fallback_slots, MAX_CHECK_BUS*32); - /* * Functions for accessing PCI configuration space with MMCONFIG accesses */ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) { - int cfg_num = -1; struct acpi_mcfg_allocation *cfg; + int cfg_num; - if (seg == 0 && bus < MAX_CHECK_BUS && - test_bit(PCI_SLOT(devfn) + 32*bus, fallback_slots)) + if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS && + test_bit(PCI_SLOT(devfn) + 32*bus, pci_mmcfg_fallback_slots)) return 0; - while (1) { - ++cfg_num; - if (cfg_num >= pci_mmcfg_config_num) { - break; - } + for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) { cfg = &pci_mmcfg_config[cfg_num]; - if (cfg->pci_segment != seg) - continue; - if ((cfg->start_bus_number <= bus) && + if (cfg->pci_segment == seg && + (cfg->start_bus_number <= bus) && (cfg->end_bus_number >= bus)) return cfg->address; } - /* Handle more broken MCFG tables on Asus etc. - They only contain a single entry for bus 0-0. Assume - this applies to all busses. */ - cfg = &pci_mmcfg_config[0]; - if (pci_mmcfg_config_num == 1 && - cfg->pci_segment == 0 && - (cfg->start_bus_number | cfg->end_bus_number) == 0) - return cfg->address; - /* Fall back to type 0 */ return 0; } @@ -158,67 +136,15 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; -/* K8 systems have some devices (typically in the builtin northbridge) - that are only accessible using type1 - Normally this can be expressed in the MCFG by not listing them - and assigning suitable _SEGs, but this isn't implemented in some BIOS. - Instead try to discover all devices on bus 0 that are unreachable using MM - and fallback for them. */ -static __init void unreachable_devices(void) +int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus, + unsigned int devfn) { - int i, k; - unsigned long flags; - - for (k = 0; k < MAX_CHECK_BUS; k++) { - for (i = 0; i < 32; i++) { - u32 val1; - u32 addr; - - pci_conf1_read(0, k, PCI_DEVFN(i, 0), 0, 4, &val1); - if (val1 == 0xffffffff) - continue; - - /* Locking probably not needed, but safer */ - spin_lock_irqsave(&pci_config_lock, flags); - addr = get_base_addr(0, k, PCI_DEVFN(i, 0)); - if (addr != 0) - pci_exp_set_dev_base(addr, k, PCI_DEVFN(i, 0)); - if (addr == 0 || - readl((u32 __iomem *)mmcfg_virt_addr) != val1) { - set_bit(i + 32*k, fallback_slots); - printk(KERN_NOTICE - "PCI: No mmconfig possible on %x:%x\n", k, i); - } - spin_unlock_irqrestore(&pci_config_lock, flags); - } - } + return get_base_addr(seg, bus, devfn) != 0; } -void __init pci_mmcfg_init(int type) +int __init pci_mmcfg_arch_init(void) { - if ((pci_probe & PCI_PROBE_MMCONF) == 0) - return; - - acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); - if ((pci_mmcfg_config_num == 0) || - (pci_mmcfg_config == NULL) || - (pci_mmcfg_config[0].address == 0)) - return; - - /* Only do this check when type 1 works. If it doesn't work - assume we run on a Mac and always use MCFG */ - if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address, - pci_mmcfg_config[0].address + MMCONFIG_APER_MIN, - E820_RESERVED)) { - printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n", - (unsigned long)pci_mmcfg_config[0].address); - printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); - return; - } - printk(KERN_INFO "PCI: Using MMCONFIG\n"); raw_pci_ops = &pci_mmcfg; - pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; - - unreachable_devices(); + return 1; } diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h index a0a25180b61..e58bae2076a 100644 --- a/arch/i386/pci/pci.h +++ b/arch/i386/pci/pci.h @@ -94,3 +94,13 @@ extern void pci_pcbios_init(void); extern void pci_mmcfg_init(int type); extern void pcibios_sort(void); +/* pci-mmconfig.c */ + +/* Verify the first 16 busses. We assume that systems with more busses + get MCFG right. */ +#define PCI_MMCFG_MAX_CHECK_BUS 16 +extern DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS); + +extern int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus, + unsigned int devfn); +extern int __init pci_mmcfg_arch_init(void); diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index db185f34e34..d51f0f11f7f 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -22,6 +22,7 @@ config IA64 config 64BIT bool + select ATA_NONSTANDARD if ATA default y config ZONE_DMA diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c index 37bb16f07fc..5cdd2f5fa06 100644 --- a/arch/ia64/kernel/crash.c +++ b/arch/ia64/kernel/crash.c @@ -222,7 +222,7 @@ machine_crash_setup(void) if((ret = register_die_notifier(&kdump_init_notifier_nb)) != 0) return ret; #ifdef CONFIG_SYSCTL - register_sysctl_table(sys_table, 0); + register_sysctl_table(sys_table); #endif return 0; } diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c index ba3ba8bc50b..456f57b087c 100644 --- a/arch/ia64/kernel/irq_ia64.c +++ b/arch/ia64/kernel/irq_ia64.c @@ -275,7 +275,7 @@ static struct irqaction ipi_irqaction = { static struct irqaction resched_irqaction = { .handler = dummy_handler, - .flags = SA_INTERRUPT, + .flags = IRQF_DISABLED, .name = "resched" }; #endif diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 9860794a68f..2ecb20b551e 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -521,19 +521,57 @@ pfm_sysctl_t pfm_sysctl; EXPORT_SYMBOL(pfm_sysctl); static ctl_table pfm_ctl_table[]={ - {1, "debug", &pfm_sysctl.debug, sizeof(int), 0666, NULL, &proc_dointvec, NULL,}, - {2, "debug_ovfl", &pfm_sysctl.debug_ovfl, sizeof(int), 0666, NULL, &proc_dointvec, NULL,}, - {3, "fastctxsw", &pfm_sysctl.fastctxsw, sizeof(int), 0600, NULL, &proc_dointvec, NULL,}, - {4, "expert_mode", &pfm_sysctl.expert_mode, sizeof(int), 0600, NULL, &proc_dointvec, NULL,}, - { 0, }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "debug", + .data = &pfm_sysctl.debug, + .maxlen = sizeof(int), + .mode = 0666, + .proc_handler = &proc_dointvec, + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "debug_ovfl", + .data = &pfm_sysctl.debug_ovfl, + .maxlen = sizeof(int), + .mode = 0666, + .proc_handler = &proc_dointvec, + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "fastctxsw", + .data = &pfm_sysctl.fastctxsw, + .maxlen = sizeof(int), + .mode = 0600, + .proc_handler = &proc_dointvec, + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "expert_mode", + .data = &pfm_sysctl.expert_mode, + .maxlen = sizeof(int), + .mode = 0600, + .proc_handler = &proc_dointvec, + }, + {} }; static ctl_table pfm_sysctl_dir[] = { - {1, "perfmon", NULL, 0, 0755, pfm_ctl_table, }, - {0,}, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "perfmon", + .mode = 0755, + .child = pfm_ctl_table, + }, + {} }; static ctl_table pfm_sysctl_root[] = { - {1, "kernel", NULL, 0, 0755, pfm_sysctl_dir, }, - {0,}, + { + .ctl_name = CTL_KERN, + .procname = "kernel", + .mode = 0755, + .child = pfm_sysctl_dir, + }, + {} }; static struct ctl_table_header *pfm_sysctl_header; @@ -6688,7 +6726,7 @@ pfm_init(void) /* * create /proc/sys/kernel/perfmon (for debugging purposes) */ - pfm_sysctl_header = register_sysctl_table(pfm_sysctl_root, 0); + pfm_sysctl_header = register_sysctl_table(pfm_sysctl_root); /* * initialize all our spinlocks diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index 7a387d23736..68355ef6f84 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -101,67 +101,57 @@ static int xpc_disengage_request_max_timelimit = 120; static ctl_table xpc_sys_xpc_hb_dir[] = { { - 1, - "hb_interval", - &xpc_hb_interval, - sizeof(int), - 0644, - NULL, - &proc_dointvec_minmax, - &sysctl_intvec, - NULL, - &xpc_hb_min_interval, - &xpc_hb_max_interval + .ctl_name = CTL_UNNUMBERED, + .procname = "hb_interval", + .data = &xpc_hb_interval, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .strategy = &sysctl_intvec, + .extra1 = &xpc_hb_min_interval, + .extra2 = &xpc_hb_max_interval }, { - 2, - "hb_check_interval", - &xpc_hb_check_interval, - sizeof(int), - 0644, - NULL, - &proc_dointvec_minmax, - &sysctl_intvec, - NULL, - &xpc_hb_check_min_interval, - &xpc_hb_check_max_interval + .ctl_name = CTL_UNNUMBERED, + .procname = "hb_check_interval", + .data = &xpc_hb_check_interval, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .strategy = &sysctl_intvec, + .extra1 = &xpc_hb_check_min_interval, + .extra2 = &xpc_hb_check_max_interval }, - {0} + {} }; static ctl_table xpc_sys_xpc_dir[] = { { - 1, - "hb", - NULL, - 0, - 0555, - xpc_sys_xpc_hb_dir + .ctl_name = CTL_UNNUMBERED, + .procname = "hb", + .mode = 0555, + .child = xpc_sys_xpc_hb_dir }, { - 2, - "disengage_request_timelimit", - &xpc_disengage_request_timelimit, - sizeof(int), - 0644, - NULL, - &proc_dointvec_minmax, - &sysctl_intvec, - NULL, - &xpc_disengage_request_min_timelimit, - &xpc_disengage_request_max_timelimit + .ctl_name = CTL_UNNUMBERED, + .procname = "disengage_request_timelimit", + .data = &xpc_disengage_request_timelimit, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .strategy = &sysctl_intvec, + .extra1 = &xpc_disengage_request_min_timelimit, + .extra2 = &xpc_disengage_request_max_timelimit }, - {0} + {} }; static ctl_table xpc_sys_dir[] = { { - 1, - "xpc", - NULL, - 0, - 0555, - xpc_sys_xpc_dir + .ctl_name = CTL_UNNUMBERED, + .procname = "xpc", + .mode = 0555, + .child = xpc_sys_xpc_dir }, - {0} + {} }; static struct ctl_table_header *xpc_sysctl; @@ -1251,7 +1241,7 @@ xpc_init(void) snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part"); snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan"); - xpc_sysctl = register_sysctl_table(xpc_sys_dir, 1); + xpc_sysctl = register_sysctl_table(xpc_sys_dir); /* * The first few fields of each entry of xpc_partitions[] need to diff --git a/arch/m68k/atari/stdma.c b/arch/m68k/atari/stdma.c index d01deb46ebb..ab3fd5202b2 100644 --- a/arch/m68k/atari/stdma.c +++ b/arch/m68k/atari/stdma.c @@ -174,7 +174,7 @@ int stdma_islocked(void) void __init stdma_init(void) { stdma_isr = NULL; - request_irq(IRQ_MFP_FDC, stdma_int, IRQ_TYPE_SLOW | SA_SHIRQ, + request_irq(IRQ_MFP_FDC, stdma_int, IRQ_TYPE_SLOW | IRQF_SHARED, "ST-DMA: floppy/ACSI/IDE/Falcon-SCSI", stdma_int); } diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 5fe195a41a8..a92ce6bd7cf 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -598,8 +598,6 @@ config SGI_IP32 select ARC select ARC32 select BOOT_ELF32 - select OWN_DMA - select DMA_IP32 select DMA_NONCOHERENT select HW_HAS_PCI select R5000_CPU_SCACHE @@ -883,9 +881,6 @@ config DMA_NONCOHERENT config DMA_NEED_PCI_MAP_STATE bool -config OWN_DMA - bool - config EARLY_PRINTK bool diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c index 7504a636461..3901e8e0475 100644 --- a/arch/mips/au1000/common/power.c +++ b/arch/mips/au1000/common/power.c @@ -62,12 +62,6 @@ extern unsigned long save_local_and_disable(int controller); extern void restore_local_and_enable(int controller, unsigned long mask); extern void local_enable_irq(unsigned int irq_nr); -/* Quick acpi hack. This will have to change! */ -#define CTL_ACPI 9999 -#define ACPI_S1_SLP_TYP 19 -#define ACPI_SLEEP 21 - - static DEFINE_SPINLOCK(pm_lock); /* We need to save/restore a bunch of core registers that are @@ -425,15 +419,41 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file, static struct ctl_table pm_table[] = { - {ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, &pm_do_suspend}, - {ACPI_SLEEP, "sleep", NULL, 0, 0600, NULL, &pm_do_sleep}, - {CTL_ACPI, "freq", NULL, 0, 0600, NULL, &pm_do_freq}, - {0} + { + .ctl_name = CTL_UNNUMBERED, + .procname = "suspend", + .data = NULL, + .maxlen = 0, + .mode = 0600, + .proc_handler = &pm_do_suspend + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "sleep", + .data = NULL, + .maxlen = 0, + .mode = 0600, + .proc_handler = &pm_do_sleep + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "freq", + .data = NULL, + .maxlen = 0, + .mode = 0600, + .proc_handler = &pm_do_freq + }, + {} }; static struct ctl_table pm_dir_table[] = { - {CTL_ACPI, "pm", NULL, 0, 0555, pm_table}, - {0} + { + .ctl_name = CTL_UNNUMBERED, + .procname = "pm", + .mode = 0555, + .child = pm_table + }, + {} }; /* @@ -441,7 +461,7 @@ static struct ctl_table pm_dir_table[] = { */ static int __init pm_init(void) { - register_sysctl_table(pm_dir_table, 1); + register_sysctl_table(pm_dir_table); return 0; } diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 96090f28373..f21186c12d8 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -264,7 +264,7 @@ CONFIG_BINFMT_ELF=y CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y -# CONFIG_MIPS32_N32 is not set +CONFIG_MIPS32_N32=y CONFIG_BINFMT_ELF32=y # diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S index b251ef864c3..00cecdcc75f 100644 --- a/arch/mips/dec/int-handler.S +++ b/arch/mips/dec/int-handler.S @@ -264,9 +264,6 @@ srlv t3,t1,t2 handle_it: - LONG_L s0, TI_REGS($28) - LONG_S sp, TI_REGS($28) - PTR_LA ra, ret_from_irq j dec_irq_dispatch nop @@ -277,7 +274,6 @@ fpu: #endif spurious: - PTR_LA ra, _ret_from_irq j spurious_interrupt nop END(plat_irq_dispatch) diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index f10b6a19f8b..0b78fcbf044 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -21,24 +21,21 @@ #endif #ifndef CONFIG_PREEMPT - .macro preempt_stop - local_irq_disable - .endm #define resume_kernel restore_all +#else +#define __ret_from_irq ret_from_exception #endif .text .align 5 -FEXPORT(ret_from_irq) - LONG_S s0, TI_REGS($28) -#ifdef CONFIG_PREEMPT -FEXPORT(ret_from_exception) -#else - b _ret_from_irq +#ifndef CONFIG_PREEMPT FEXPORT(ret_from_exception) - preempt_stop + local_irq_disable # preempt stop + b __ret_from_irq #endif -FEXPORT(_ret_from_irq) +FEXPORT(ret_from_irq) + LONG_S s0, TI_REGS($28) +FEXPORT(__ret_from_irq) LONG_L t0, PT_STATUS(sp) # returning to kernel mode? andi t0, t0, KU_USER beqz t0, resume_kernel diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index ca7ad78f4de..fc4dd6c9dd8 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -39,6 +39,7 @@ #include <net/sock.h> #include <net/scm.h> +#include <asm/compat-signal.h> #include <asm/ipc.h> #include <asm/sim.h> #include <asm/uaccess.h> @@ -736,3 +737,49 @@ _sys32_clone(nabi_no_regargs struct pt_regs regs) return do_fork(clone_flags, newsp, ®s, 0, parent_tidptr, child_tidptr); } + +/* + * Implement the event wait interface for the eventpoll file. It is the kernel + * part of the user space epoll_pwait(2). + */ +asmlinkage long compat_sys_epoll_pwait(int epfd, + struct epoll_event __user *events, int maxevents, int timeout, + const compat_sigset_t __user *sigmask, size_t sigsetsize) +{ + int error; + sigset_t ksigmask, sigsaved; + + /* + * If the caller wants a certain signal mask to be set during the wait, + * we apply it here. + */ + if (sigmask) { + if (sigsetsize != sizeof(sigset_t)) + return -EINVAL; + if (!access_ok(VERIFY_READ, sigmask, sizeof(ksigmask))) + return -EFAULT; + if (__copy_conv_sigset_from_user(&ksigmask, sigmask)) + return -EFAULT; + sigdelsetmask(&ksigmask, sigmask(SIGKILL) | sigmask(SIGSTOP)); + sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved); + } + + error = sys_epoll_wait(epfd, events, maxevents, timeout); + + /* + * If we changed the signal mask, we need to restore the original one. + * In case we've got a signal while waiting, we do not restore the + * signal mask yet, and we allow do_signal() to deliver the signal on + * the way back to userspace, before the signal mask is restored. + */ + if (sigmask) { + if (error == -EINTR) { + memcpy(¤t->saved_sigmask, &sigsaved, + sizeof(sigsaved)); + set_thread_flag(TIF_RESTORE_SIGMASK); + } else + sigprocmask(SIG_SETMASK, &sigsaved, NULL); + } + + return error; +} diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index e569b846e9a..10e9a18630a 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -470,4 +470,4 @@ sys_call_table: PTR sys_get_robust_list PTR sys_kexec_load /* 5270 */ PTR sys_getcpu - PTR sys_epoll_pwait + PTR compat_sys_epoll_pwait diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index ee8802b5975..2ceda4644a4 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -396,4 +396,4 @@ EXPORT(sysn32_call_table) PTR compat_sys_get_robust_list PTR compat_sys_kexec_load PTR sys_getcpu - PTR sys_epoll_pwait + PTR compat_sys_epoll_pwait diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h index 9a8abd67ec5..fdbdbdc65b5 100644 --- a/arch/mips/kernel/signal-common.h +++ b/arch/mips/kernel/signal-common.h @@ -19,37 +19,7 @@ # define DEBUGP(fmt, args...) #endif -/* - * Horribly complicated - with the bloody RM9000 workarounds enabled - * the signal trampolines is moving to the end of the structure so we can - * increase the alignment without breaking software compatibility. - */ -#if ICACHE_REFILLS_WORKAROUND_WAR == 0 - -struct sigframe { - u32 sf_ass[4]; /* argument save space for o32 */ - u32 sf_code[2]; /* signal trampoline */ - struct sigcontext sf_sc; - sigset_t sf_mask; -}; - -#else /* ICACHE_REFILLS_WORKAROUND_WAR */ - -struct sigframe { - u32 sf_ass[4]; /* argument save space for o32 */ - u32 sf_pad[2]; - struct sigcontext sf_sc; /* hw context */ - sigset_t sf_mask; - u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ -}; - -#endif /* !ICACHE_REFILLS_WORKAROUND_WAR */ - -/* - * handle hardware context - */ -extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *); -extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) /* * Determine which stack to use.. diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 54398af2371..b2e9ab1bb10 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -34,10 +34,20 @@ #include "signal-common.h" -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - +/* + * Horribly complicated - with the bloody RM9000 workarounds enabled + * the signal trampolines is moving to the end of the structure so we can + * increase the alignment without breaking software compatibility. + */ #if ICACHE_REFILLS_WORKAROUND_WAR == 0 +struct sigframe { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_code[2]; /* signal trampoline */ + struct sigcontext sf_sc; + sigset_t sf_mask; +}; + struct rt_sigframe { u32 rs_ass[4]; /* argument save space for o32 */ u32 rs_code[2]; /* signal trampoline */ @@ -47,6 +57,14 @@ struct rt_sigframe { #else +struct sigframe { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_pad[2]; + struct sigcontext sf_sc; /* hw context */ + sigset_t sf_mask; + u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ +}; + struct rt_sigframe { u32 rs_ass[4]; /* argument save space for o32 */ u32 rs_pad[2]; diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 183fc7e55f3..c28cb21514c 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -8,6 +8,7 @@ * Copyright (C) 1999, 2000 Silicon Graphics, Inc. */ #include <linux/cache.h> +#include <linux/compat.h> #include <linux/sched.h> #include <linux/mm.h> #include <linux/smp.h> @@ -24,6 +25,7 @@ #include <asm/abi.h> #include <asm/asm.h> +#include <asm/compat-signal.h> #include <linux/bitops.h> #include <asm/cacheflush.h> #include <asm/sim.h> @@ -104,8 +106,6 @@ typedef struct compat_siginfo { #define __NR_O32_rt_sigreturn 4193 #define __NR_O32_restart_syscall 4253 -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - /* 32-bit compatibility types */ #define _NSIG_BPW32 32 @@ -139,8 +139,20 @@ struct ucontext32 { sigset_t32 uc_sigmask; /* mask last for extensibility */ }; +/* + * Horribly complicated - with the bloody RM9000 workarounds enabled + * the signal trampolines is moving to the end of the structure so we can + * increase the alignment without breaking software compatibility. + */ #if ICACHE_REFILLS_WORKAROUND_WAR == 0 +struct sigframe32 { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_code[2]; /* signal trampoline */ + struct sigcontext32 sf_sc; + sigset_t sf_mask; +}; + struct rt_sigframe32 { u32 rs_ass[4]; /* argument save space for o32 */ u32 rs_code[2]; /* signal trampoline */ @@ -150,6 +162,14 @@ struct rt_sigframe32 { #else /* ICACHE_REFILLS_WORKAROUND_WAR */ +struct sigframe32 { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_pad[2]; + struct sigcontext32 sf_sc; /* hw context */ + sigset_t sf_mask; + u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */ +}; + struct rt_sigframe32 { u32 rs_ass[4]; /* argument save space for o32 */ u32 rs_pad[2]; @@ -493,13 +513,13 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs) { - struct sigframe __user *frame; + struct sigframe32 __user *frame; sigset_t blocked; - frame = (struct sigframe __user *) regs.regs[29]; + frame = (struct sigframe32 __user *) regs.regs[29]; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; - if (__copy_from_user(&blocked, &frame->sf_mask, sizeof(blocked))) + if (__copy_conv_sigset_from_user(&blocked, &frame->sf_mask)) goto badframe; sigdelsetmask(&blocked, ~_BLOCKABLE); @@ -536,7 +556,7 @@ asmlinkage void sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) frame = (struct rt_sigframe32 __user *) regs.regs[29]; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; - if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set))) + if (__copy_conv_sigset_from_user(&set, &frame->rs_uc.uc_sigmask)) goto badframe; sigdelsetmask(&set, ~_BLOCKABLE); @@ -581,7 +601,7 @@ badframe: int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, int signr, sigset_t *set) { - struct sigframe __user *frame; + struct sigframe32 __user *frame; int err = 0; frame = get_sigframe(ka, regs, sizeof(*frame)); @@ -591,7 +611,8 @@ int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs, err |= install_sigtramp(frame->sf_code, __NR_O32_sigreturn); err |= setup_sigcontext32(regs, &frame->sf_sc); - err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set)); + err |= __copy_conv_sigset_to_user(&frame->sf_mask, set); + if (err) goto give_sigsegv; @@ -650,7 +671,7 @@ int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs, err |= __put_user(current->sas_ss_size, &frame->rs_uc.uc_stack.ss_size); err |= setup_sigcontext32(regs, &frame->rs_uc.uc_mcontext); - err |= __copy_to_user(&frame->rs_uc.uc_sigmask, set, sizeof(*set)); + err |= __copy_conv_sigset_to_user(&frame->rs_uc.uc_sigmask, set); if (err) goto give_sigsegv; diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index 57456e6a0c6..7ca2a078841 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -31,6 +31,7 @@ #include <asm/asm.h> #include <asm/cacheflush.h> +#include <asm/compat-signal.h> #include <asm/sim.h> #include <asm/uaccess.h> #include <asm/ucontext.h> @@ -47,7 +48,9 @@ #define __NR_N32_rt_sigreturn 6211 #define __NR_N32_restart_syscall 6214 -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) +extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *); +extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); + /* IRIX compatible stack_t */ typedef struct sigaltstack32 { @@ -61,7 +64,7 @@ struct ucontextn32 { s32 uc_link; stack32_t uc_stack; struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ + compat_sigset_t uc_sigmask; /* mask last for extensibility */ }; #if ICACHE_REFILLS_WORKAROUND_WAR == 0 @@ -127,7 +130,7 @@ asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) frame = (struct rt_sigframe_n32 __user *) regs.regs[29]; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; - if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set))) + if (__copy_conv_sigset_from_user(&set, &frame->rs_uc.uc_sigmask)) goto badframe; sigdelsetmask(&set, ~_BLOCKABLE); @@ -193,7 +196,7 @@ int setup_rt_frame_n32(struct k_sigaction * ka, err |= __put_user(current->sas_ss_size, &frame->rs_uc.uc_stack.ss_size); err |= setup_sigcontext(regs, &frame->rs_uc.uc_mcontext); - err |= __copy_to_user(&frame->rs_uc.uc_sigmask, set, sizeof(*set)); + err |= __copy_conv_sigset_to_user(&frame->rs_uc.uc_sigmask, set); if (err) goto give_sigsegv; diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 545fcbc8cea..e5e56bd498d 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -307,7 +307,7 @@ static unsigned int __init calibrate_hpt(void) struct clocksource clocksource_mips = { .name = "MIPS", .mask = 0xffffffff, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static void __init init_mips_clocksource(void) diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c index 12878359f2c..699ab1886ce 100644 --- a/arch/mips/lasat/sysctl.c +++ b/arch/mips/lasat/sysctl.c @@ -302,42 +302,129 @@ extern int lasat_boot_to_service; #ifdef CONFIG_SYSCTL static ctl_table lasat_table[] = { - {LASAT_CPU_HZ, "cpu-hz", &lasat_board_info.li_cpu_hz, sizeof(int), - 0444, NULL, &proc_dointvec, &sysctl_intvec}, - {LASAT_BUS_HZ, "bus-hz", &lasat_board_info.li_bus_hz, sizeof(int), - 0444, NULL, &proc_dointvec, &sysctl_intvec}, - {LASAT_MODEL, "bmid", &lasat_board_info.li_bmid, sizeof(int), - 0444, NULL, &proc_dointvec, &sysctl_intvec}, - {LASAT_PRID, "prid", &lasat_board_info.li_prid, sizeof(int), - 0644, NULL, &proc_lasat_eeprom_value, &sysctl_lasat_eeprom_value}, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "cpu-hz", + .data = &lasat_board_info.li_cpu_hz, + .maxlen = sizeof(int), + .mode = 0444, + .proc_handler = &proc_dointvec, + .strategy = &sysctl_intvec + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "bus-hz", + .data = &lasat_board_info.li_bus_hz, + .maxlen = sizeof(int), + .mode = 0444, + .proc_handler = &proc_dointvec, + .strategy = &sysctl_intvec + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "bmid", + .data = &lasat_board_info.li_bmid, + .maxlen = sizeof(int), + .mode = 0444, + .proc_handler = &proc_dointvec, + .strategy = &sysctl_intvec + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "prid", + .data = &lasat_board_info.li_prid, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_lasat_eeprom_value, + .strategy = &sysctl_lasat_eeprom_value + }, #ifdef CONFIG_INET - {LASAT_IPADDR, "ipaddr", &lasat_board_info.li_eeprom_info.ipaddr, sizeof(int), - 0644, NULL, &proc_lasat_ip, &sysctl_lasat_intvec}, - {LASAT_NETMASK, "netmask", &lasat_board_info.li_eeprom_info.netmask, sizeof(int), - 0644, NULL, &proc_lasat_ip, &sysctl_lasat_intvec}, - {LASAT_BCAST, "bcastaddr", &lasat_bcastaddr, - sizeof(lasat_bcastaddr), 0600, NULL, - &proc_dostring, &sysctl_string}, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "ipaddr", + .data = &lasat_board_info.li_eeprom_info.ipaddr, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_lasat_ip, + .strategy = &sysctl_lasat_intvec + }, + { + .ctl_name = LASAT_NETMASK, + .procname = "netmask", + .data = &lasat_board_info.li_eeprom_info.netmask, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_lasat_ip, + .strategy = &sysctl_lasat_intvec + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "bcastaddr", + .data = &lasat_bcastaddr, + .maxlen = sizeof(lasat_bcastaddr), + .mode = 0600, + .proc_handler = &proc_dostring, + .strategy = &sysctl_string + }, #endif - {LASAT_PASSWORD, "passwd_hash", &lasat_board_info.li_eeprom_info.passwd_hash, sizeof(lasat_board_info.li_eeprom_info.passwd_hash), - 0600, NULL, &proc_dolasatstring, &sysctl_lasatstring}, - {LASAT_SBOOT, "boot-service", &lasat_boot_to_service, sizeof(int), - 0644, NULL, &proc_dointvec, &sysctl_intvec}, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "passwd_hash", + .data = &lasat_board_info.li_eeprom_info.passwd_hash, + .maxlen = sizeof(lasat_board_info.li_eeprom_info.passwd_hash), + .mode = 0600, + .proc_handler = &proc_dolasatstring, + .strategy = &sysctl_lasatstring + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "boot-service", + .data = &lasat_boot_to_service, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec, + .strategy = &sysctl_intvec + }, #ifdef CONFIG_DS1603 - {LASAT_RTC, "rtc", &rtctmp, sizeof(int), - 0644, NULL, &proc_dolasatrtc, &sysctl_lasat_rtc}, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "rtc", + .data = &rtctmp, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dolasatrtc, + .strategy = &sysctl_lasat_rtc + }, #endif - {LASAT_NAMESTR, "namestr", &lasat_board_info.li_namestr, sizeof(lasat_board_info.li_namestr), - 0444, NULL, &proc_dostring, &sysctl_string}, - {LASAT_TYPESTR, "typestr", &lasat_board_info.li_typestr, sizeof(lasat_board_info.li_typestr), - 0444, NULL, &proc_dostring, &sysctl_string}, - {0} + { + .ctl_name = CTL_UNNUMBERED, + .procname = "namestr", + .data = &lasat_board_info.li_namestr, + .maxlen = sizeof(lasat_board_info.li_namestr), + .mode = 0444, + .proc_handler = &proc_dostring, + .strategy = &sysctl_string + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "typestr", + .data = &lasat_board_info.li_typestr, + .maxlen = sizeof(lasat_board_info.li_typestr), + .mode = 0444, + .proc_handler = &proc_dostring, + .strategy = &sysctl_string + }, + {} }; -#define CTL_LASAT 1 // CTL_ANY ??? static ctl_table lasat_root_table[] = { - { CTL_LASAT, "lasat", NULL, 0, 0555, lasat_table }, - { 0 } + { + .ctl_name = CTL_UNNUMBERED, + .procname = "lasat", + .mode = 0555, + .child = lasat_table + }, + {} }; static int __init lasat_register_sysctl(void) @@ -345,7 +432,7 @@ static int __init lasat_register_sysctl(void) struct ctl_table_header *lasat_table_header; lasat_table_header = - register_sysctl_table(lasat_root_table, 0); + register_sysctl_table(lasat_root_table); return 0; } diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index 19e41fd186c..de5727385bc 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -2,8 +2,8 @@ # Makefile for the Linux/MIPS-specific parts of the memory manager. # -obj-y += cache.o extable.o fault.o init.o pgtable.o \ - tlbex.o tlbex-fault.o +obj-y += cache.o dma-default.o extable.o fault.o \ + init.o pgtable.o tlbex.o tlbex-fault.o obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o obj-$(CONFIG_64BIT) += pgtable-64.o @@ -32,14 +32,4 @@ obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o -# -# Choose one DMA coherency model -# -ifndef CONFIG_OWN_DMA -obj-$(CONFIG_DMA_COHERENT) += dma-coherent.o -obj-$(CONFIG_DMA_NONCOHERENT) += dma-noncoherent.o -endif -obj-$(CONFIG_DMA_IP27) += dma-ip27.o -obj-$(CONFIG_DMA_IP32) += dma-ip32.o - EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c index 3a8afd47fea..9ea460b16bd 100644 --- a/arch/mips/mm/c-sb1.c +++ b/arch/mips/mm/c-sb1.c @@ -259,6 +259,12 @@ static void sb1_flush_cache_data_page(unsigned long addr) on_each_cpu(sb1_flush_cache_data_page_ipi, (void *) addr, 1, 1); } #else + +static void local_sb1_flush_cache_data_page(unsigned long addr) +{ + __sb1_writeback_inv_dcache_range(addr, addr + PAGE_SIZE); +} + void sb1_flush_cache_data_page(unsigned long) __attribute__((alias("local_sb1_flush_cache_data_page"))); #endif diff --git a/arch/mips/mm/dma-coherent.c b/arch/mips/mm/dma-coherent.c deleted file mode 100644 index 5697c6e250a..00000000000 --- a/arch/mips/mm/dma-coherent.c +++ /dev/null @@ -1,254 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi <ajoshi@unixbox.com> - * Copyright (C) 2000, 2001 Ralf Baechle <ralf@gnu.org> - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - */ -#include <linux/types.h> -#include <linux/dma-mapping.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/string.h> - -#include <asm/cache.h> -#include <asm/io.h> - -void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = virt_to_phys(ret); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_noncoherent); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) - __attribute__((alias("dma_alloc_noncoherent"))); - -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - unsigned long addr = (unsigned long) vaddr; - - free_pages(addr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_noncoherent); - -void dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) __attribute__((alias("dma_free_noncoherent"))); - -EXPORT_SYMBOL(dma_free_coherent); - -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - return __pa(ptr); -} - -EXPORT_SYMBOL(dma_map_single); - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_single); - -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - for (i = 0; i < nents; i++, sg++) { - sg->dma_address = (dma_addr_t)page_to_phys(sg->page) + sg->offset; - } - - return nents; -} - -EXPORT_SYMBOL(dma_map_sg); - -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - return page_to_phys(page) + offset; -} - -EXPORT_SYMBOL(dma_map_page); - -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_page); - -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_sg); - -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_for_cpu); - -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_for_device); - -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); - -void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_device); - -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_sg_for_cpu); - -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_sg_for_device); - -int dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} - -EXPORT_SYMBOL(dma_mapping_error); - -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - - return 1; -} - -EXPORT_SYMBOL(dma_supported); - -int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 1; -} - -EXPORT_SYMBOL(dma_is_consistent); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_cache_sync); - -/* The DAC routines are a PCIism.. */ - -#ifdef CONFIG_PCI - -#include <linux/pci.h> - -dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, unsigned long offset, int direction) -{ - return (dma64_addr_t)page_to_phys(page) + offset; -} - -EXPORT_SYMBOL(pci_dac_page_to_dma); - -struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return mem_map + (dma_addr >> PAGE_SHIFT); -} - -EXPORT_SYMBOL(pci_dac_dma_to_page); - -unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return dma_addr & ~PAGE_MASK; -} - -EXPORT_SYMBOL(pci_dac_dma_to_offset); - -void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); - -void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); - -#endif /* CONFIG_PCI */ diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-default.c index 8cecef0957c..4a32e939698 100644 --- a/arch/mips/mm/dma-noncoherent.c +++ b/arch/mips/mm/dma-default.c @@ -4,28 +4,39 @@ * for more details. * * Copyright (C) 2000 Ani Joshi <ajoshi@unixbox.com> - * Copyright (C) 2000, 2001 Ralf Baechle <ralf@gnu.org> + * Copyright (C) 2000, 2001, 06 Ralf Baechle <ralf@linux-mips.org> * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. */ + #include <linux/types.h> +#include <linux/dma-mapping.h> #include <linux/mm.h> #include <linux/module.h> #include <linux/string.h> -#include <linux/dma-mapping.h> #include <asm/cache.h> #include <asm/io.h> +#include <dma-coherence.h> + /* * Warning on the terminology - Linux calls an uncached area coherent; * MIPS terminology calls memory areas with hardware maintained coherency * coherent. */ +static inline int cpu_is_noncoherent_r10000(struct device *dev) +{ + return !plat_device_is_coherent(dev) && + (current_cpu_data.cputype == CPU_R10000 && + current_cpu_data.cputype == CPU_R12000); +} + void *dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t * dma_handle, gfp_t gfp) { void *ret; + /* ignore region specifiers */ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); @@ -35,7 +46,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size, if (ret != NULL) { memset(ret, 0, size); - *dma_handle = virt_to_phys(ret); + *dma_handle = plat_map_dma_mem(dev, ret, size); } return ret; @@ -48,10 +59,21 @@ void *dma_alloc_coherent(struct device *dev, size_t size, { void *ret; - ret = dma_alloc_noncoherent(dev, size, dma_handle, gfp); + /* ignore region specifiers */ + gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); + + if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) + gfp |= GFP_DMA; + ret = (void *) __get_free_pages(gfp, get_order(size)); + if (ret) { - dma_cache_wback_inv((unsigned long) ret, size); - ret = UNCAC_ADDR(ret); + memset(ret, 0, size); + *dma_handle = plat_map_dma_mem(dev, ret, size); + + if (!plat_device_is_coherent(dev)) { + dma_cache_wback_inv((unsigned long) ret, size); + ret = UNCAC_ADDR(ret); + } } return ret; @@ -72,7 +94,9 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr, { unsigned long addr = (unsigned long) vaddr; - addr = CAC_ADDR(addr); + if (!plat_device_is_coherent(dev)) + addr = CAC_ADDR(addr); + free_pages(addr, get_order(size)); } @@ -104,9 +128,10 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, { unsigned long addr = (unsigned long) ptr; - __dma_sync(addr, size, direction); + if (!plat_device_is_coherent(dev)) + __dma_sync(addr, size, direction); - return virt_to_phys(ptr); + return plat_map_dma_mem(dev, ptr, size); } EXPORT_SYMBOL(dma_map_single); @@ -114,10 +139,11 @@ EXPORT_SYMBOL(dma_map_single); void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, enum dma_data_direction direction) { - unsigned long addr; - addr = dma_addr + PAGE_OFFSET; + if (cpu_is_noncoherent_r10000(dev)) + __dma_sync(plat_dma_addr_to_phys(dma_addr) + PAGE_OFFSET, size, + direction); - //__dma_sync(addr, size, direction); + plat_unmap_dma_mem(dma_addr); } EXPORT_SYMBOL(dma_unmap_single); @@ -133,11 +159,10 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, unsigned long addr; addr = (unsigned long) page_address(sg->page); - if (addr) { + if (!plat_device_is_coherent(dev) && addr) __dma_sync(addr + sg->offset, sg->length, direction); - sg->dma_address = (dma_addr_t)page_to_phys(sg->page) - + sg->offset; - } + sg->dma_address = plat_map_dma_mem_page(dev, sg->page) + + sg->offset; } return nents; @@ -148,14 +173,16 @@ EXPORT_SYMBOL(dma_map_sg); dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction direction) { - unsigned long addr; - BUG_ON(direction == DMA_NONE); - addr = (unsigned long) page_address(page) + offset; - dma_cache_wback_inv(addr, size); + if (!plat_device_is_coherent(dev)) { + unsigned long addr; + + addr = (unsigned long) page_address(page) + offset; + dma_cache_wback_inv(addr, size); + } - return page_to_phys(page) + offset; + return plat_map_dma_mem_page(dev, page) + offset; } EXPORT_SYMBOL(dma_map_page); @@ -165,12 +192,14 @@ void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, { BUG_ON(direction == DMA_NONE); - if (direction != DMA_TO_DEVICE) { + if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) { unsigned long addr; - addr = dma_address + PAGE_OFFSET; + addr = plat_dma_addr_to_phys(dma_address); dma_cache_wback_inv(addr, size); } + + plat_unmap_dma_mem(dma_address); } EXPORT_SYMBOL(dma_unmap_page); @@ -183,13 +212,15 @@ void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, BUG_ON(direction == DMA_NONE); - if (direction == DMA_TO_DEVICE) - return; - for (i = 0; i < nhwentries; i++, sg++) { - addr = (unsigned long) page_address(sg->page); - if (addr) - __dma_sync(addr + sg->offset, sg->length, direction); + if (!plat_device_is_coherent(dev) && + direction != DMA_TO_DEVICE) { + addr = (unsigned long) page_address(sg->page); + if (addr) + __dma_sync(addr + sg->offset, sg->length, + direction); + } + plat_unmap_dma_mem(sg->dma_address); } } @@ -198,12 +229,14 @@ EXPORT_SYMBOL(dma_unmap_sg); void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { - unsigned long addr; - BUG_ON(direction == DMA_NONE); - addr = dma_handle + PAGE_OFFSET; - __dma_sync(addr, size, direction); + if (cpu_is_noncoherent_r10000(dev)) { + unsigned long addr; + + addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle); + __dma_sync(addr, size, direction); + } } EXPORT_SYMBOL(dma_sync_single_for_cpu); @@ -211,12 +244,14 @@ EXPORT_SYMBOL(dma_sync_single_for_cpu); void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { - unsigned long addr; - BUG_ON(direction == DMA_NONE); - addr = dma_handle + PAGE_OFFSET; - __dma_sync(addr, size, direction); + if (cpu_is_noncoherent_r10000(dev)) { + unsigned long addr; + + addr = plat_dma_addr_to_phys(dma_handle); + __dma_sync(addr, size, direction); + } } EXPORT_SYMBOL(dma_sync_single_for_device); @@ -224,12 +259,14 @@ EXPORT_SYMBOL(dma_sync_single_for_device); void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction) { - unsigned long addr; - BUG_ON(direction == DMA_NONE); - addr = dma_handle + offset + PAGE_OFFSET; - __dma_sync(addr, size, direction); + if (cpu_is_noncoherent_r10000(dev)) { + unsigned long addr; + + addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle); + __dma_sync(addr + offset, size, direction); + } } EXPORT_SYMBOL(dma_sync_single_range_for_cpu); @@ -237,12 +274,14 @@ EXPORT_SYMBOL(dma_sync_single_range_for_cpu); void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction) { - unsigned long addr; - BUG_ON(direction == DMA_NONE); - addr = dma_handle + offset + PAGE_OFFSET; - __dma_sync(addr, size, direction); + if (cpu_is_noncoherent_r10000(dev)) { + unsigned long addr; + + addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle); + __dma_sync(addr + offset, size, direction); + } } EXPORT_SYMBOL(dma_sync_single_range_for_device); @@ -255,9 +294,12 @@ void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, BUG_ON(direction == DMA_NONE); /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) - __dma_sync((unsigned long)page_address(sg->page), - sg->length, direction); + for (i = 0; i < nelems; i++, sg++) { + if (!plat_device_is_coherent(dev)) + __dma_sync((unsigned long)page_address(sg->page), + sg->length, direction); + plat_unmap_dma_mem(sg->dma_address); + } } EXPORT_SYMBOL(dma_sync_sg_for_cpu); @@ -270,9 +312,12 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele BUG_ON(direction == DMA_NONE); /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) - __dma_sync((unsigned long)page_address(sg->page), - sg->length, direction); + for (i = 0; i < nelems; i++, sg++) { + if (!plat_device_is_coherent(dev)) + __dma_sync((unsigned long)page_address(sg->page), + sg->length, direction); + plat_unmap_dma_mem(sg->dma_address); + } } EXPORT_SYMBOL(dma_sync_sg_for_device); @@ -301,70 +346,18 @@ EXPORT_SYMBOL(dma_supported); int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) { - return 1; + return plat_device_is_coherent(dev); } EXPORT_SYMBOL(dma_is_consistent); void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) + enum dma_data_direction direction) { - if (direction == DMA_NONE) - return; + BUG_ON(direction == DMA_NONE); - dma_cache_wback_inv((unsigned long)vaddr, size); + if (!plat_device_is_coherent(dev)) + dma_cache_wback_inv((unsigned long)vaddr, size); } EXPORT_SYMBOL(dma_cache_sync); - -/* The DAC routines are a PCIism.. */ - -#ifdef CONFIG_PCI - -#include <linux/pci.h> - -dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, unsigned long offset, int direction) -{ - return (dma64_addr_t)page_to_phys(page) + offset; -} - -EXPORT_SYMBOL(pci_dac_page_to_dma); - -struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return mem_map + (dma_addr >> PAGE_SHIFT); -} - -EXPORT_SYMBOL(pci_dac_dma_to_page); - -unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return dma_addr & ~PAGE_MASK; -} - -EXPORT_SYMBOL(pci_dac_dma_to_offset); - -void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); - - dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); - -void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); - - dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); - -#endif /* CONFIG_PCI */ diff --git a/arch/mips/mm/dma-ip27.c b/arch/mips/mm/dma-ip27.c deleted file mode 100644 index f088344db46..00000000000 --- a/arch/mips/mm/dma-ip27.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi <ajoshi@unixbox.com> - * Copyright (C) 2000, 2001 Ralf Baechle <ralf@gnu.org> - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - */ -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/pci.h> - -#include <asm/cache.h> -#include <asm/pci/bridge.h> - -#define pdev_to_baddr(pdev, addr) \ - (BRIDGE_CONTROLLER(pdev->bus)->baddr + (addr)) -#define dev_to_baddr(dev, addr) \ - pdev_to_baddr(to_pci_dev(dev), (addr)) - -void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = dev_to_baddr(dev, virt_to_phys(ret)); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_noncoherent); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) - __attribute__((alias("dma_alloc_noncoherent"))); - -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - unsigned long addr = (unsigned long) vaddr; - - free_pages(addr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_noncoherent); - -void dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) __attribute__((alias("dma_free_noncoherent"))); - -EXPORT_SYMBOL(dma_free_coherent); - -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - return dev_to_baddr(dev, __pa(ptr)); -} - -EXPORT_SYMBOL(dma_map_single); - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_single); - -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - for (i = 0; i < nents; i++, sg++) { - sg->dma_address = (dma_addr_t) dev_to_baddr(dev, - page_to_phys(sg->page) + sg->offset); - } - - return nents; -} - -EXPORT_SYMBOL(dma_map_sg); - -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - return dev_to_baddr(dev, page_to_phys(page) + offset); -} - -EXPORT_SYMBOL(dma_map_page); - -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_page); - -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_unmap_sg); - -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_for_cpu); - -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_for_device); - -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); - -void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_device); - -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_sg_for_cpu); - -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_sync_sg_for_device); - -int dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} - -EXPORT_SYMBOL(dma_mapping_error); - -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - - return 1; -} - -EXPORT_SYMBOL(dma_supported); - -int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 1; -} - -EXPORT_SYMBOL(dma_is_consistent); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); -} - -EXPORT_SYMBOL(dma_cache_sync); - -dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, unsigned long offset, int direction) -{ - dma64_addr_t addr = page_to_phys(page) + offset; - - return (dma64_addr_t) pdev_to_baddr(pdev, addr); -} - -EXPORT_SYMBOL(pci_dac_page_to_dma); - -struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus); - - return pfn_to_page((dma_addr - bc->baddr) >> PAGE_SHIFT); -} - -EXPORT_SYMBOL(pci_dac_dma_to_page); - -unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr) -{ - return dma_addr & ~PAGE_MASK; -} - -EXPORT_SYMBOL(pci_dac_dma_to_offset); - -void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); - -void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, size_t len, int direction) -{ - BUG_ON(direction == PCI_DMA_NONE); -} - -EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); diff --git a/arch/mips/mm/dma-ip32.c b/arch/mips/mm/dma-ip32.c deleted file mode 100644 index b42b6f7456e..00000000000 --- a/arch/mips/mm/dma-ip32.c +++ /dev/null @@ -1,383 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Ani Joshi <ajoshi@unixbox.com> - * Copyright (C) 2000, 2001 Ralf Baechle <ralf@gnu.org> - * Copyright (C) 2005 Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com> - * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. - * IP32 changes by Ilya. - */ -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/dma-mapping.h> - -#include <asm/cache.h> -#include <asm/io.h> -#include <asm/ip32/crime.h> - -/* - * Warning on the terminology - Linux calls an uncached area coherent; - * MIPS terminology calls memory areas with hardware maintained coherency - * coherent. - */ - -/* - * Few notes. - * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M - * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for native-endian) - * 3. All other devices see memory as one big chunk at 0x40000000 - * 4. Non-PCI devices will pass NULL as struct device* - * Thus we translate differently, depending on device. - */ - -#define RAM_OFFSET_MASK 0x3fffffff - -void *dma_alloc_noncoherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff)) - gfp |= GFP_DMA; - ret = (void *) __get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - unsigned long addr = virt_to_phys(ret)&RAM_OFFSET_MASK; - memset(ret, 0, size); - if(dev==NULL) - addr+= CRIME_HI_MEM_BASE; - *dma_handle = addr; - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_noncoherent); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, gfp_t gfp) -{ - void *ret; - - ret = dma_alloc_noncoherent(dev, size, dma_handle, gfp); - if (ret) { - dma_cache_wback_inv((unsigned long) ret, size); - ret = UNCAC_ADDR(ret); - } - - return ret; -} - -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - free_pages((unsigned long) vaddr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_noncoherent); - -void dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ - unsigned long addr = (unsigned long) vaddr; - - addr = CAC_ADDR(addr); - free_pages(addr, get_order(size)); -} - -EXPORT_SYMBOL(dma_free_coherent); - -static inline void __dma_sync(unsigned long addr, size_t size, - enum dma_data_direction direction) -{ - switch (direction) { - case DMA_TO_DEVICE: - dma_cache_wback(addr, size); - break; - - case DMA_FROM_DEVICE: - dma_cache_inv(addr, size); - break; - - case DMA_BIDIRECTIONAL: - dma_cache_wback_inv(addr, size); - break; - - default: - BUG(); - } -} - -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - unsigned long addr = (unsigned long) ptr; - - switch (direction) { - case DMA_TO_DEVICE: - dma_cache_wback(addr, size); - break; - - case DMA_FROM_DEVICE: - dma_cache_inv(addr, size); - break; - - case DMA_BIDIRECTIONAL: - dma_cache_wback_inv(addr, size); - break; - - default: - BUG(); - } - - addr = virt_to_phys(ptr)&RAM_OFFSET_MASK; - if(dev == NULL) - addr+=CRIME_HI_MEM_BASE; - return (dma_addr_t)addr; -} - -EXPORT_SYMBOL(dma_map_single); - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - switch (direction) { - case DMA_TO_DEVICE: - break; - - case DMA_FROM_DEVICE: - break; - - case DMA_BIDIRECTIONAL: - break; - - default: - BUG(); - } -} - -EXPORT_SYMBOL(dma_unmap_single); - -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - for (i = 0; i < nents; i++, sg++) { - unsigned long addr; - - addr = (unsigned long) page_address(sg->page)+sg->offset; - if (addr) - __dma_sync(addr, sg->length, direction); - addr = __pa(addr)&RAM_OFFSET_MASK; - if(dev == NULL) - addr += CRIME_HI_MEM_BASE; - sg->dma_address = (dma_addr_t)addr; - } - - return nents; -} - -EXPORT_SYMBOL(dma_map_sg); - -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - addr = (unsigned long) page_address(page) + offset; - dma_cache_wback_inv(addr, size); - addr = __pa(addr)&RAM_OFFSET_MASK; - if(dev == NULL) - addr += CRIME_HI_MEM_BASE; - - return (dma_addr_t)addr; -} - -EXPORT_SYMBOL(dma_map_page); - -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - if (direction != DMA_TO_DEVICE) { - unsigned long addr; - - dma_address&=RAM_OFFSET_MASK; - addr = dma_address + PAGE_OFFSET; - if(dma_address>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - dma_cache_wback_inv(addr, size); - } -} - -EXPORT_SYMBOL(dma_unmap_page); - -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - unsigned long addr; - int i; - - BUG_ON(direction == DMA_NONE); - - if (direction == DMA_TO_DEVICE) - return; - - for (i = 0; i < nhwentries; i++, sg++) { - addr = (unsigned long) page_address(sg->page); - if (!addr) - continue; - dma_cache_wback_inv(addr + sg->offset, sg->length); - } -} - -EXPORT_SYMBOL(dma_unmap_sg); - -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - dma_handle&=RAM_OFFSET_MASK; - addr = dma_handle + PAGE_OFFSET; - if(dma_handle>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_for_cpu); - -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - dma_handle&=RAM_OFFSET_MASK; - addr = dma_handle + PAGE_OFFSET; - if(dma_handle>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_for_device); - -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - dma_handle&=RAM_OFFSET_MASK; - addr = dma_handle + offset + PAGE_OFFSET; - if(dma_handle>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); - -void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, enum dma_data_direction direction) -{ - unsigned long addr; - - BUG_ON(direction == DMA_NONE); - - dma_handle&=RAM_OFFSET_MASK; - addr = dma_handle + offset + PAGE_OFFSET; - if(dma_handle>=256*1024*1024) - addr+=CRIME_HI_MEM_BASE; - __dma_sync(addr, size, direction); -} - -EXPORT_SYMBOL(dma_sync_single_range_for_device); - -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) - __dma_sync((unsigned long)page_address(sg->page), - sg->length, direction); -} - -EXPORT_SYMBOL(dma_sync_sg_for_cpu); - -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - int i; - - BUG_ON(direction == DMA_NONE); - - /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) - __dma_sync((unsigned long)page_address(sg->page), - sg->length, direction); -} - -EXPORT_SYMBOL(dma_sync_sg_for_device); - -int dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} - -EXPORT_SYMBOL(dma_mapping_error); - -int dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - - return 1; -} - -EXPORT_SYMBOL(dma_supported); - -int dma_is_consistent(struct device *dev, dma_addr_t dma_addr) -{ - return 1; -} - -EXPORT_SYMBOL(dma_is_consistent); - -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - if (direction == DMA_NONE) - return; - - dma_cache_wback_inv((unsigned long)vaddr, size); -} - -EXPORT_SYMBOL(dma_cache_sync); - diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 82b20c28bef..bf85995ca04 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -2,7 +2,7 @@ # Makefile for the PCI specific kernel interface routines under Linux. # -obj-y += pci.o +obj-y += pci.o pci-dac.o # # PCI bus host bridge specific code diff --git a/arch/mips/pci/pci-dac.c b/arch/mips/pci/pci-dac.c new file mode 100644 index 00000000000..0f0ea1b7d4d --- /dev/null +++ b/arch/mips/pci/pci-dac.c @@ -0,0 +1,79 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Ani Joshi <ajoshi@unixbox.com> + * Copyright (C) 2000, 2001, 06 Ralf Baechle <ralf@linux-mips.org> + * swiped from i386, and cloned for MIPS by Geert, polished by Ralf. + */ + +#include <linux/types.h> +#include <linux/dma-mapping.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/string.h> + +#include <asm/cache.h> +#include <asm/io.h> + +#include <dma-coherence.h> + +#include <linux/pci.h> + +dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, + struct page *page, unsigned long offset, int direction) +{ + struct device *dev = &pdev->dev; + + BUG_ON(direction == DMA_NONE); + + if (!plat_device_is_coherent(dev)) { + unsigned long addr; + + addr = (unsigned long) page_address(page) + offset; + dma_cache_wback_inv(addr, PAGE_SIZE); + } + + return plat_map_dma_mem_page(dev, page) + offset; +} + +EXPORT_SYMBOL(pci_dac_page_to_dma); + +struct page *pci_dac_dma_to_page(struct pci_dev *pdev, + dma64_addr_t dma_addr) +{ + return pfn_to_page(plat_dma_addr_to_phys(dma_addr) >> PAGE_SHIFT); +} + +EXPORT_SYMBOL(pci_dac_dma_to_page); + +unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, + dma64_addr_t dma_addr) +{ + return dma_addr & ~PAGE_MASK; +} + +EXPORT_SYMBOL(pci_dac_dma_to_offset); + +void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, + dma64_addr_t dma_addr, size_t len, int direction) +{ + BUG_ON(direction == PCI_DMA_NONE); + + if (!plat_device_is_coherent(&pdev->dev)) + dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); +} + +EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu); + +void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, + dma64_addr_t dma_addr, size_t len, int direction) +{ + BUG_ON(direction == PCI_DMA_NONE); + + if (!plat_device_is_coherent(&pdev->dev)) + dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len); +} + +EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device); diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 0088c5ebca7..340d9beab6d 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -876,7 +876,7 @@ config ARCH_SPARSEMEM_ENABLE config ARCH_SPARSEMEM_DEFAULT def_bool y - depends on (SMP && PPC_PSERIES) || PPC_CELL + depends on (SMP && PPC_PSERIES) || PPC_PS3 config ARCH_POPULATES_NODE_MAP def_bool y diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts new file mode 100644 index 00000000000..096e94ac415 --- /dev/null +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -0,0 +1,148 @@ +/* + * Device Tree Souce for Buffalo KuroboxHD + * + * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use + * the default configuration linkstation_defconfig. + * + * Based on sandpoint.dts + * + * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de> + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + +XXXX add flash parts, rtc, ?? + +build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" + + + */ + +/ { + linux,phandle = <1000>; + model = "KuroboxHD"; + compatible = "linkstation"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + linux,phandle = <2000>; + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,603e { /* Really 8241 */ + linux,phandle = <2100>; + linux,boot-cpu; + device_type = "cpu"; + reg = <0>; + clock-frequency = <bebc200>; /* Fixed by bootwrapper */ + timebase-frequency = <1743000>; /* Fixed by bootwrapper */ + bus-frequency = <0>; /* From bootloader */ + /* Following required by dtc but not used */ + i-cache-line-size = <0>; + d-cache-line-size = <0>; + i-cache-size = <4000>; + d-cache-size = <4000>; + }; + }; + + memory { + linux,phandle = <3000>; + device_type = "memory"; + reg = <00000000 04000000>; + }; + + soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ + linux,phandle = <4000>; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + compatible = "mpc10x"; + store-gathering = <0>; /* 0 == off, !0 == on */ + reg = <80000000 00100000>; + ranges = <80000000 80000000 70000000 /* pci mem space */ + fc000000 fc000000 00100000 /* EUMB */ + fe000000 fe000000 00c00000 /* pci i/o space */ + fec00000 fec00000 00300000 /* pci cfg regs */ + fef00000 fef00000 00100000>; /* pci iack */ + + i2c@80003000 { + linux,phandle = <4300>; + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <80003000 1000>; + interrupts = <5 2>; + interrupt-parent = <4400>; + }; + + serial@80004500 { + linux,phandle = <4511>; + device_type = "serial"; + compatible = "ns16550"; + reg = <80004500 8>; + clock-frequency = <5d08d88>; + current-speed = <2580>; + interrupts = <9 2>; + interrupt-parent = <4400>; + }; + + serial@80004600 { + linux,phandle = <4512>; + device_type = "serial"; + compatible = "ns16550"; + reg = <80004600 8>; + clock-frequency = <5d08d88>; + current-speed = <e100>; + interrupts = <a 0>; + interrupt-parent = <4400>; + }; + + pic@80040000 { + linux,phandle = <4400>; + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <80040000 40000>; + built-in; + }; + + pci@fec00000 { + linux,phandle = <4500>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "mpc10x-pci"; + reg = <fec00000 400000>; + ranges = <01000000 0 0 fe000000 0 00c00000 + 02000000 0 80000000 80000000 0 70000000>; + bus-range = <0 ff>; + clock-frequency = <7f28155>; + interrupt-parent = <4400>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x11 - IRQ0 ETH */ + 5800 0 0 1 4400 0 1 + 5800 0 0 2 4400 1 1 + 5800 0 0 3 4400 2 1 + 5800 0 0 4 4400 3 1 + /* IDSEL 0x12 - IRQ1 IDE0 */ + 6000 0 0 1 4400 1 1 + 6000 0 0 2 4400 2 1 + 6000 0 0 3 4400 3 1 + 6000 0 0 4 4400 0 1 + /* IDSEL 0x14 - IRQ3 USB2.0 */ + 7000 0 0 1 4400 3 1 + 7000 0 0 2 4400 3 1 + 7000 0 0 3 4400 3 1 + 7000 0 0 4 4400 3 1 + >; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index 186870704ad..c03103c6328 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -1,7 +1,7 @@ /* * Lite5200 board Device Tree Source * - * Copyright 2006 Secret Lab Technologies Ltd. + * Copyright 2006-2007 Secret Lab Technologies Ltd. * Grant Likely <grant.likely@secretlab.ca> * * This program is free software; you can redistribute it and/or modify it @@ -17,8 +17,9 @@ */ / { - model = "Lite5200"; - compatible = "lite5200\0lite52xx\0mpc5200\0mpc52xx"; + model = "fsl,lite5200"; + // revision = "1.0"; + compatible = "fsl,lite5200\0generic-mpc5200"; #address-cells = <1>; #size-cells = <1>; @@ -47,14 +48,17 @@ }; soc5200@f0000000 { + model = "fsl,mpc5200"; + revision = "" // from bootloader #interrupt-cells = <3>; device_type = "soc"; ranges = <0 f0000000 f0010000>; reg = <f0000000 00010000>; bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader cdm@200 { - compatible = "mpc5200-cdm\0mpc52xx-cdm"; + compatible = "mpc5200-cdm"; reg = <200 38>; }; @@ -64,77 +68,86 @@ interrupt-controller; #interrupt-cells = <3>; device_type = "interrupt-controller"; - compatible = "mpc5200-pic\0mpc52xx-pic"; + compatible = "mpc5200-pic"; reg = <500 80>; built-in; }; gpt@600 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <0>; reg = <600 10>; interrupts = <1 9 0>; interrupt-parent = <500>; + has-wdt; }; gpt@610 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <1>; reg = <610 10>; interrupts = <1 a 0>; interrupt-parent = <500>; }; gpt@620 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <2>; reg = <620 10>; interrupts = <1 b 0>; interrupt-parent = <500>; }; gpt@630 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <3>; reg = <630 10>; interrupts = <1 c 0>; interrupt-parent = <500>; }; gpt@640 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <4>; reg = <640 10>; interrupts = <1 d 0>; interrupt-parent = <500>; }; gpt@650 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <5>; reg = <650 10>; interrupts = <1 e 0>; interrupt-parent = <500>; }; gpt@660 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <6>; reg = <660 10>; interrupts = <1 f 0>; interrupt-parent = <500>; }; gpt@670 { // General Purpose Timer - compatible = "mpc5200-gpt\0mpc52xx-gpt"; + compatible = "mpc5200-gpt"; device_type = "gpt"; + cell-index = <7>; reg = <670 10>; interrupts = <1 10 0>; interrupt-parent = <500>; }; rtc@800 { // Real time clock - compatible = "mpc5200-rtc\0mpc52xx-rtc"; + compatible = "mpc5200-rtc"; device_type = "rtc"; reg = <800 100>; interrupts = <1 5 0 1 6 0>; @@ -143,7 +156,8 @@ mscan@900 { device_type = "mscan"; - compatible = "mpc5200-mscan\0mpc52xx-mscan"; + compatible = "mpc5200-mscan"; + cell-index = <0>; interrupts = <2 11 0>; interrupt-parent = <500>; reg = <900 80>; @@ -151,21 +165,22 @@ mscan@980 { device_type = "mscan"; - compatible = "mpc5200-mscan\0mpc52xx-mscan"; + compatible = "mpc5200-mscan"; + cell-index = <1>; interrupts = <1 12 0>; interrupt-parent = <500>; reg = <980 80>; }; gpio@b00 { - compatible = "mpc5200-gpio\0mpc52xx-gpio"; + compatible = "mpc5200-gpio"; reg = <b00 40>; interrupts = <1 7 0>; interrupt-parent = <500>; }; gpio-wkup@b00 { - compatible = "mpc5200-gpio-wkup\0mpc52xx-gpio-wkup"; + compatible = "mpc5200-gpio-wkup"; reg = <c00 40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <500>; @@ -176,7 +191,7 @@ #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - compatible = "mpc5200-pci\0mpc52xx-pci"; + compatible = "mpc5200-pci"; reg = <d00 100>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = <c000 0 0 1 500 0 0 3 @@ -194,7 +209,7 @@ spi@f00 { device_type = "spi"; - compatible = "mpc5200-spi\0mpc52xx-spi"; + compatible = "mpc5200-spi"; reg = <f00 20>; interrupts = <2 d 0 2 e 0>; interrupt-parent = <500>; @@ -202,7 +217,7 @@ usb@1000 { device_type = "usb-ohci-be"; - compatible = "mpc5200-ohci\0mpc52xx-ohci\0ohci-be"; + compatible = "mpc5200-ohci\0ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; interrupt-parent = <500>; @@ -210,7 +225,7 @@ bestcomm@1200 { device_type = "dma-controller"; - compatible = "mpc5200-bestcomm\0mpc52xx-bestcomm"; + compatible = "mpc5200-bestcomm"; reg = <1200 80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 @@ -220,67 +235,73 @@ }; xlb@1f00 { - compatible = "mpc5200-xlb\0mpc52xx-xlb"; + compatible = "mpc5200-xlb"; reg = <1f00 100>; }; serial@2000 { // PSC1 device_type = "serial"; - compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart"; + compatible = "mpc5200-psc-uart"; port-number = <0>; // Logical port assignment + cell-index = <0>; reg = <2000 100>; interrupts = <2 1 0>; interrupt-parent = <500>; }; - // PSC2 in spi mode example - spi@2200 { // PSC2 - device_type = "spi"; - compatible = "mpc5200-psc-spi\0mpc52xx-psc-spi"; - reg = <2200 100>; - interrupts = <2 2 0>; - interrupt-parent = <500>; - }; + // PSC2 in ac97 mode example + //ac97@2200 { // PSC2 + // device_type = "sound"; + // compatible = "mpc5200-psc-ac97"; + // cell-index = <1>; + // reg = <2200 100>; + // interrupts = <2 2 0>; + // interrupt-parent = <500>; + //}; // PSC3 in CODEC mode example - i2s@2400 { // PSC3 - device_type = "sound"; - compatible = "mpc5200-psc-i2s\0mpc52xx-psc-i2s"; - reg = <2400 100>; - interrupts = <2 3 0>; - interrupt-parent = <500>; - }; + //i2s@2400 { // PSC3 + // device_type = "sound"; + // compatible = "mpc5200-psc-i2s"; + // cell-index = <2>; + // reg = <2400 100>; + // interrupts = <2 3 0>; + // interrupt-parent = <500>; + //}; - // PSC4 unconfigured + // PSC4 in uart mode example //serial@2600 { // PSC4 // device_type = "serial"; - // compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart"; + // compatible = "mpc5200-psc-uart"; + // cell-index = <3>; // reg = <2600 100>; // interrupts = <2 b 0>; // interrupt-parent = <500>; //}; - // PSC5 unconfigured + // PSC5 in uart mode example //serial@2800 { // PSC5 // device_type = "serial"; - // compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart"; + // compatible = "mpc5200-psc-uart"; + // cell-index = <4>; // reg = <2800 100>; // interrupts = <2 c 0>; // interrupt-parent = <500>; //}; - // PSC6 in AC97 mode example - ac97@2c00 { // PSC6 - device_type = "sound"; - compatible = "mpc5200-psc-ac97\0mpc52xx-psc-ac97"; - reg = <2c00 100>; - interrupts = <2 4 0>; - interrupt-parent = <500>; - }; + // PSC6 in spi mode example + //spi@2c00 { // PSC6 + // device_type = "spi"; + // compatible = "mpc5200-psc-spi"; + // cell-index = <5>; + // reg = <2c00 100>; + // interrupts = <2 4 0>; + // interrupt-parent = <500>; + //}; ethernet@3000 { device_type = "network"; - compatible = "mpc5200-fec\0mpc52xx-fec"; + compatible = "mpc5200-fec"; reg = <3000 800>; mac-address = [ 02 03 04 05 06 07 ]; // Bad! interrupts = <2 5 0>; @@ -289,7 +310,7 @@ ata@3a00 { device_type = "ata"; - compatible = "mpc5200-ata\0mpc52xx-ata"; + compatible = "mpc5200-ata"; reg = <3a00 100>; interrupts = <2 7 0>; interrupt-parent = <500>; @@ -297,7 +318,8 @@ i2c@3d00 { device_type = "i2c"; - compatible = "mpc5200-i2c\0mpc52xx-i2c"; + compatible = "mpc5200-i2c"; + cell-index = <0>; reg = <3d00 40>; interrupts = <2 f 0>; interrupt-parent = <500>; @@ -305,14 +327,15 @@ i2c@3d40 { device_type = "i2c"; - compatible = "mpc5200-i2c\0mpc52xx-i2c"; + compatible = "mpc5200-i2c"; + cell-index = <1>; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <500>; }; sram@8000 { device_type = "sram"; - compatible = "mpc5200-sram\0mpc52xx-sram\0sram"; + compatible = "mpc5200-sram\0sram"; reg = <8000 4000>; }; }; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index 5bb2760d7c3..3875ca9a9a6 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -1,7 +1,7 @@ /* * Lite5200B board Device Tree Source * - * Copyright 2006 Secret Lab Technologies Ltd. + * Copyright 2006-2007 Secret Lab Technologies Ltd. * Grant Likely <grant.likely@secretlab.ca> * * This program is free software; you can redistribute it and/or modify it @@ -17,8 +17,9 @@ */ / { - model = "Lite5200b"; - compatible = "lite5200b\0lite52xx\0mpc5200b\0mpc52xx"; + model = "fsl,lite5200b"; + // revision = "1.0"; + compatible = "fsl,lite5200b\0generic-mpc5200"; #address-cells = <1>; #size-cells = <1>; @@ -47,14 +48,17 @@ }; soc5200@f0000000 { + model = "fsl,mpc5200b"; + revision = ""; // from bootloader #interrupt-cells = <3>; device_type = "soc"; ranges = <0 f0000000 f0010000>; reg = <f0000000 00010000>; bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader cdm@200 { - compatible = "mpc5200b-cdm\0mpc52xx-cdm"; + compatible = "mpc5200b-cdm\0mpc5200-cdm"; reg = <200 38>; }; @@ -64,77 +68,86 @@ interrupt-controller; #interrupt-cells = <3>; device_type = "interrupt-controller"; - compatible = "mpc5200b-pic\0mpc52xx-pic"; + compatible = "mpc5200b-pic\0mpc5200-pic"; reg = <500 80>; built-in; }; gpt@600 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <0>; reg = <600 10>; interrupts = <1 9 0>; interrupt-parent = <500>; + has-wdt; }; gpt@610 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <1>; reg = <610 10>; interrupts = <1 a 0>; interrupt-parent = <500>; }; gpt@620 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <2>; reg = <620 10>; interrupts = <1 b 0>; interrupt-parent = <500>; }; gpt@630 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <3>; reg = <630 10>; interrupts = <1 c 0>; interrupt-parent = <500>; }; gpt@640 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <4>; reg = <640 10>; interrupts = <1 d 0>; interrupt-parent = <500>; }; gpt@650 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <5>; reg = <650 10>; interrupts = <1 e 0>; interrupt-parent = <500>; }; gpt@660 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <6>; reg = <660 10>; interrupts = <1 f 0>; interrupt-parent = <500>; }; gpt@670 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc52xx-gpt"; + compatible = "mpc5200b-gpt\0mpc5200-gpt"; device_type = "gpt"; + cell-index = <7>; reg = <670 10>; interrupts = <1 10 0>; interrupt-parent = <500>; }; rtc@800 { // Real time clock - compatible = "mpc5200b-rtc\0mpc52xx-rtc"; + compatible = "mpc5200b-rtc\0mpc5200-rtc"; device_type = "rtc"; reg = <800 100>; interrupts = <1 5 0 1 6 0>; @@ -143,7 +156,8 @@ mscan@900 { device_type = "mscan"; - compatible = "mpc5200b-mscan\0mpc52xx-mscan"; + compatible = "mpc5200b-mscan\0mpc5200-mscan"; + cell-index = <0>; interrupts = <2 11 0>; interrupt-parent = <500>; reg = <900 80>; @@ -151,21 +165,22 @@ mscan@980 { device_type = "mscan"; - compatible = "mpc5200b-mscan\0mpc52xx-mscan"; + compatible = "mpc5200b-mscan\0mpc5200-mscan"; + cell-index = <1>; interrupts = <1 12 0>; interrupt-parent = <500>; reg = <980 80>; }; gpio@b00 { - compatible = "mpc5200b-gpio\0mpc52xx-gpio"; + compatible = "mpc5200b-gpio\0mpc5200-gpio"; reg = <b00 40>; interrupts = <1 7 0>; interrupt-parent = <500>; }; gpio-wkup@b00 { - compatible = "mpc5200b-gpio-wkup\0mpc52xx-gpio-wkup"; + compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup"; reg = <c00 40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <500>; @@ -176,7 +191,7 @@ #size-cells = <2>; #address-cells = <3>; device_type = "pci"; - compatible = "mpc5200b-pci\0mpc52xx-pci"; + compatible = "mpc5200b-pci\0mpc5200-pci"; reg = <d00 100>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = <c000 0 0 1 500 0 0 3 // 1st slot @@ -199,7 +214,7 @@ spi@f00 { device_type = "spi"; - compatible = "mpc5200b-spi\0mpc52xx-spi"; + compatible = "mpc5200b-spi\0mpc5200-spi"; reg = <f00 20>; interrupts = <2 d 0 2 e 0>; interrupt-parent = <500>; @@ -207,7 +222,7 @@ usb@1000 { device_type = "usb-ohci-be"; - compatible = "mpc5200b-ohci\0mpc52xx-ohci\0ohci-be"; + compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; interrupt-parent = <500>; @@ -215,7 +230,7 @@ bestcomm@1200 { device_type = "dma-controller"; - compatible = "mpc5200b-bestcomm\0mpc52xx-bestcomm"; + compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm"; reg = <1200 80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 @@ -225,67 +240,73 @@ }; xlb@1f00 { - compatible = "mpc5200b-xlb\0mpc52xx-xlb"; + compatible = "mpc5200b-xlb\0mpc5200-xlb"; reg = <1f00 100>; }; serial@2000 { // PSC1 device_type = "serial"; - compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart"; + compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; port-number = <0>; // Logical port assignment + cell-index = <0>; reg = <2000 100>; interrupts = <2 1 0>; interrupt-parent = <500>; }; - // PSC2 in spi mode example - spi@2200 { // PSC2 - device_type = "spi"; - compatible = "mpc5200b-psc-spi\0mpc52xx-psc-spi"; - reg = <2200 100>; - interrupts = <2 2 0>; - interrupt-parent = <500>; - }; + // PSC2 in ac97 mode example + //ac97@2200 { // PSC2 + // device_type = "sound"; + // compatible = "mpc5200b-psc-ac97\0mpc5200-psc-ac97"; + // cell-index = <1>; + // reg = <2200 100>; + // interrupts = <2 2 0>; + // interrupt-parent = <500>; + //}; // PSC3 in CODEC mode example - i2s@2400 { // PSC3 - device_type = "sound"; - compatible = "mpc5200b-psc-i2s\0mpc52xx-psc-i2s"; - reg = <2400 100>; - interrupts = <2 3 0>; - interrupt-parent = <500>; - }; + //i2s@2400 { // PSC3 + // device_type = "sound"; + // compatible = "mpc5200b-psc-i2s"; //not 5200 compatible + // cell-index = <2>; + // reg = <2400 100>; + // interrupts = <2 3 0>; + // interrupt-parent = <500>; + //}; - // PSC4 unconfigured + // PSC4 in uart mode example //serial@2600 { // PSC4 // device_type = "serial"; - // compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart"; + // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; + // cell-index = <3>; // reg = <2600 100>; // interrupts = <2 b 0>; // interrupt-parent = <500>; //}; - // PSC5 unconfigured + // PSC5 in uart mode example //serial@2800 { // PSC5 // device_type = "serial"; - // compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart"; + // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; + // cell-index = <4>; // reg = <2800 100>; // interrupts = <2 c 0>; // interrupt-parent = <500>; //}; - // PSC6 in AC97 mode example - ac97@2c00 { // PSC6 - device_type = "sound"; - compatible = "mpc5200b-psc-ac97\0mpc52xx-psc-ac97"; - reg = <2c00 100>; - interrupts = <2 4 0>; - interrupt-parent = <500>; - }; + // PSC6 in spi mode example + //spi@2c00 { // PSC6 + // device_type = "spi"; + // compatible = "mpc5200b-psc-spi\0mpc5200-psc-spi"; + // cell-index = <5>; + // reg = <2c00 100>; + // interrupts = <2 4 0>; + // interrupt-parent = <500>; + //}; ethernet@3000 { device_type = "network"; - compatible = "mpc5200b-fec\0mpc52xx-fec"; + compatible = "mpc5200b-fec\0mpc5200-fec"; reg = <3000 800>; mac-address = [ 02 03 04 05 06 07 ]; // Bad! interrupts = <2 5 0>; @@ -294,7 +315,7 @@ ata@3a00 { device_type = "ata"; - compatible = "mpc5200b-ata\0mpc52xx-ata"; + compatible = "mpc5200b-ata\0mpc5200-ata"; reg = <3a00 100>; interrupts = <2 7 0>; interrupt-parent = <500>; @@ -302,7 +323,8 @@ i2c@3d00 { device_type = "i2c"; - compatible = "mpc5200b-i2c\0mpc52xx-i2c"; + compatible = "mpc5200b-i2c\0mpc5200-i2c"; + cell-index = <0>; reg = <3d00 40>; interrupts = <2 f 0>; interrupt-parent = <500>; @@ -310,14 +332,15 @@ i2c@3d40 { device_type = "i2c"; - compatible = "mpc5200b-i2c\0mpc52xx-i2c"; + compatible = "mpc5200b-i2c\0mpc5200-i2c"; + cell-index = <1>; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <500>; }; sram@8000 { device_type = "sram"; - compatible = "mpc5200b-sram\0mpc52xx-sram\0sram"; + compatible = "mpc5200b-sram\0mpc5200-sram\0sram"; reg = <8000 4000>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts new file mode 100644 index 00000000000..3d2f5a06df3 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -0,0 +1,219 @@ +/* + * MPC8313E RDB Device Tree Source + * + * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8313ERDB"; + compatible = "MPC83xx"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8313@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 08000000>; // 128MB at 0 + }; + + soc8313@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <e 8>; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <f 8>; + interrupt-parent = <700>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "mpc83xx_spi"; + reg = <7000 1000>; + interrupts = <10 8>; + interrupt-parent = <700>; + mode = <0>; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 2>; + phy_type = "utmi_wide"; + }; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <24520>; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <700>; + interrupts = <13 2>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@4 { + linux,phandle = <2452004>; + interrupt-parent = <700>; + interrupts = <14 2>; + reg = <4>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <25 8 24 8 23 8>; + interrupt-parent = <700>; + phy-handle = <2452001>; + }; + + ethernet@25000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <22 8 21 8 20 8>; + interrupt-parent = <700>; + phy-handle = <2452004>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <a 8>; + interrupt-parent = <700>; + }; + + pci@8500 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x0E -mini PCI */ + 7000 0 0 1 700 12 8 + 7000 0 0 2 700 12 8 + 7000 0 0 3 700 12 8 + 7000 0 0 4 700 12 8 + + /* IDSEL 0x0F - PCI slot */ + 7800 0 0 1 700 11 8 + 7800 0 0 2 700 12 8 + 7800 0 0 3 700 11 8 + 7800 0 0 4 700 12 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 7000>; + interrupts = <b 8>; + interrupt-parent = <700>; + /* Rev. 2.2 */ + num-channels = <1>; + channel-fifo-len = <18>; + exec-units-mask = <0000004c>; + descriptor-types-mask = <0122003f>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts new file mode 100644 index 00000000000..3190774de1d --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -0,0 +1,187 @@ +/* + * MPC8349E-mITX-GP Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +/ { + model = "MPC8349EMITXGP"; + compatible = "MPC834xMITXGP"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; + i-cache-line-size = <20>; + d-cache-size = <8000>; + i-cache-size = <8000>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 10000000>; + }; + + soc8349@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00000200>; + bus-frequency = <0>; // from bootloader + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <e 8>; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <f 8>; + interrupt-parent = <700>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "mpc83xx_spi"; + reg = <7000 1000>; + interrupts = <10 8>; + interrupt-parent = <700>; + mode = <0>; + }; + + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 2>; + dr_mode = "otg"; + phy_type = "ulpi"; + }; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <24520>; + + /* Vitesse 8201 */ + ethernet-phy@1c { + linux,phandle = <245201c>; + interrupt-parent = <700>; + interrupts = <12 2>; + reg = <1c>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8 21 8 22 8>; + interrupt-parent = <700>; + phy-handle = <245201c>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; // from bootloader + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; // from bootloader + interrupts = <a 8>; + interrupt-parent = <700>; + }; + + pci@8600 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0F - PCI Slot */ + 7800 0 0 1 700 14 8 /* PCI_INTA */ + 7800 0 0 2 700 15 8 /* PCI_INTB */ + >; + interrupt-parent = <700>; + interrupts = <43 8>; + bus-range = <1 1>; + ranges = <42000000 0 a0000000 a0000000 0 10000000 + 02000000 0 b0000000 b0000000 0 10000000 + 01000000 0 00000000 e3000000 0 01000000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8600 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 10000>; + interrupts = <b 8>; + interrupt-parent = <700>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; + descriptor-types-mask = <01010ebf>; + }; + + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index efceb343265..dc121b3cb4a 100644 --- a/arch/powerpc/boot/dts/mpc8349emds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -39,6 +39,11 @@ reg = <00000000 10000000>; // 256MB at 0 }; + bcsr@e2400000 { + device_type = "board-control"; + reg = <e2400000 8000>; + }; + soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>; @@ -103,6 +108,7 @@ #size-cells = <0>; interrupt-parent = <700>; interrupts = <26 2>; + dr_mode = "otg"; phy_type = "ulpi"; }; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts new file mode 100644 index 00000000000..06d24653e42 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -0,0 +1,380 @@ +/* + * MPC8568E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/* +/memreserve/ 00000000 1000000; +*/ + +/ { + model = "MPC8568EMDS"; + compatible = "MPC85xxMDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8568@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 10000000>; + }; + + bcsr@f8000000 { + device_type = "board-control"; + reg = <f8000000 8000>; + }; + + soc8568@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00100000>; + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <d 2 e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452002>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + mac-address = [ 00 00 00 00 00 00]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452003>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 f000>; + interrupts = <1d 2>; + interrupt-parent = <40000>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <000000fe>; + descriptor-types-mask = <012b0ebf>; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + par_io@e0100 { + reg = <e0100 100>; + device_type = "par_io"; + num-ports = <7>; + + ucc_pin@01 { + linux,phandle = <e010001>; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 4 0a 1 0 2 0 /* TxD0 */ + 4 09 1 0 2 0 /* TxD1 */ + 4 08 1 0 2 0 /* TxD2 */ + 4 07 1 0 2 0 /* TxD3 */ + 4 17 1 0 2 0 /* TxD4 */ + 4 16 1 0 2 0 /* TxD5 */ + 4 15 1 0 2 0 /* TxD6 */ + 4 14 1 0 2 0 /* TxD7 */ + 4 0f 2 0 2 0 /* RxD0 */ + 4 0e 2 0 2 0 /* RxD1 */ + 4 0d 2 0 2 0 /* RxD2 */ + 4 0c 2 0 2 0 /* RxD3 */ + 4 1d 2 0 2 0 /* RxD4 */ + 4 1c 2 0 2 0 /* RxD5 */ + 4 1b 2 0 2 0 /* RxD6 */ + 4 1a 2 0 2 0 /* RxD7 */ + 4 0b 1 0 2 0 /* TX_EN */ + 4 18 1 0 2 0 /* TX_ER */ + 4 0f 2 0 2 0 /* RX_DV */ + 4 1e 2 0 2 0 /* RX_ER */ + 4 11 2 0 2 0 /* RX_CLK */ + 4 13 1 0 2 0 /* GTX_CLK */ + 1 1f 2 0 3 0>; /* GTX125 */ + }; + ucc_pin@02 { + linux,phandle = <e010002>; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 5 0a 1 0 2 0 /* TxD0 */ + 5 09 1 0 2 0 /* TxD1 */ + 5 08 1 0 2 0 /* TxD2 */ + 5 07 1 0 2 0 /* TxD3 */ + 5 17 1 0 2 0 /* TxD4 */ + 5 16 1 0 2 0 /* TxD5 */ + 5 15 1 0 2 0 /* TxD6 */ + 5 14 1 0 2 0 /* TxD7 */ + 5 0f 2 0 2 0 /* RxD0 */ + 5 0e 2 0 2 0 /* RxD1 */ + 5 0d 2 0 2 0 /* RxD2 */ + 5 0c 2 0 2 0 /* RxD3 */ + 5 1d 2 0 2 0 /* RxD4 */ + 5 1c 2 0 2 0 /* RxD5 */ + 5 1b 2 0 2 0 /* RxD6 */ + 5 1a 2 0 2 0 /* RxD7 */ + 5 0b 1 0 2 0 /* TX_EN */ + 5 18 1 0 2 0 /* TX_ER */ + 5 10 2 0 2 0 /* RX_DV */ + 5 1e 2 0 2 0 /* RX_ER */ + 5 11 2 0 2 0 /* RX_CLK */ + 5 13 1 0 2 0 /* GTX_CLK */ + 1 1f 2 0 3 0 /* GTX125 */ + 4 06 3 0 2 0 /* MDIO */ + 4 05 1 0 2 0>; /* MDC */ + }; + }; + }; + + qe@e0080000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + model = "QE"; + ranges = <0 e0080000 00040000>; + reg = <e0080000 480>; + brg-frequency = <0>; + bus-frequency = <179A7B00>; + + muram@10000 { + device_type = "muram"; + ranges = <0 00010000 0000c000>; + + data-only@0{ + reg = <0 c000>; + }; + }; + + spi@4c0 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <4c0 40>; + interrupts = <2>; + interrupt-parent = <80>; + mode = "cpu"; + }; + + spi@500 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <500 40>; + interrupts = <1>; + interrupt-parent = <80>; + mode = "cpu"; + }; + + ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <1>; + reg = <2000 200>; + interrupts = <20>; + interrupt-parent = <80>; + mac-address = [ 00 04 9f 00 23 23 ]; + rx-clock = <0>; + tx-clock = <19>; + phy-handle = <212000>; + pio-handle = <e010001>; + }; + + ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <2>; + reg = <3000 200>; + interrupts = <21>; + interrupt-parent = <80>; + mac-address = [ 00 11 22 33 44 55 ]; + rx-clock = <0>; + tx-clock = <14>; + phy-handle = <212001>; + pio-handle = <e010002>; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2120 18>; + device_type = "mdio"; + compatible = "ucc_geth_phy"; + + /* These are the same PHYs as on + * gianfar's MDIO bus */ + ethernet-phy@00 { + linux,phandle = <212000>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <0>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + ethernet-phy@01 { + linux,phandle = <212001>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <1>; + device_type = "ethernet-phy"; + interface = <6>; + }; + ethernet-phy@02 { + linux,phandle = <212002>; + interrupt-parent = <40000>; + interrupts = <31 1>; + reg = <2>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + ethernet-phy@03 { + linux,phandle = <212003>; + interrupt-parent = <40000>; + interrupts = <32 1>; + reg = <3>; + device_type = "ethernet-phy"; + interface = <6>; //ENET_1000_GMII + }; + }; + + qeic@80 { + linux,phandle = <80>; + interrupt-controller; + device_type = "qeic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <80 80>; + built-in; + big-endian; + interrupts = <1e 2 1e 2>; //high:30 low:30 + interrupt-parent = <40000>; + }; + + }; +}; diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 405c1c90821..dde66a597a8 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Mon Jan 22 22:17:58 2007 +# Linux kernel version: 2.6.20-rc6 +# Sun Jan 28 23:13:56 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -58,7 +58,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # -CONFIG_LOCALVERSION="-kuroboxHG" +CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y @@ -206,7 +206,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -# CONFIG_SECCOMP is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # @@ -312,39 +312,40 @@ CONFIG_NF_CONNTRACK=m # CONFIG_NF_CT_ACCT is not set # CONFIG_NF_CONNTRACK_MARK is not set # CONFIG_NF_CONNTRACK_EVENTS is not set -# CONFIG_NF_CT_PROTO_SCTP is not set -# CONFIG_NF_CONNTRACK_AMANDA is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m -# CONFIG_NF_CONNTRACK_H323 is not set +CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -# CONFIG_NF_CONNTRACK_PPTP is not set -# CONFIG_NF_CONNTRACK_SIP is not set +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set -CONFIG_NETFILTER_XT_TARGET_MARK=m +# CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -CONFIG_NETFILTER_XT_TARGET_NFLOG=m +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_MARK is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_STATE is not set +CONFIG_NETFILTER_XT_MATCH_STATE=m # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set @@ -359,12 +360,12 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m # CONFIG_IP_NF_MATCH_TOS is not set -# CONFIG_IP_NF_MATCH_RECENT is not set +CONFIG_IP_NF_MATCH_RECENT=m # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_AH is not set # CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_MATCH_OWNER is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m # CONFIG_IP_NF_TARGET_LOG is not set @@ -374,16 +375,17 @@ CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_SAME is not set # CONFIG_NF_NAT_SNMP_BASIC is not set +CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_TFTP=m -# CONFIG_NF_NAT_AMANDA is not set -# CONFIG_NF_NAT_PPTP is not set -# CONFIG_NF_NAT_H323 is not set -# CONFIG_NF_NAT_SIP is not set +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m @@ -472,6 +474,7 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set @@ -518,6 +521,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0xffc00000 CONFIG_MTD_PHYSMAP_LEN=0x400000 CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_OF is not set # CONFIG_MTD_PLATRAM is not set # @@ -540,6 +544,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # NAND Flash Device Drivers # # CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set # # OneNAND Flash Device Drivers @@ -696,7 +701,7 @@ CONFIG_ATA=y # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set +CONFIG_PATA_IT821X=y # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set @@ -763,11 +768,33 @@ CONFIG_TUN=m # # PHY device support # +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # -# CONFIG_NET_ETHERNET is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +CONFIG_NET_TULIP=y +# CONFIG_DE2104X is not set +CONFIG_TULIP=y +# CONFIG_TULIP_MWI is not set +CONFIG_TULIP_MMIO=y +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set # # Ethernet (1000 Mbit) @@ -829,7 +856,8 @@ CONFIG_NET_RADIO=y # CONFIG_USB_ZD1201 is not set # CONFIG_HOSTAP is not set # CONFIG_BCM43XX is not set -# CONFIG_ZD1211RW is not set +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set CONFIG_NET_WIRELESS=y # @@ -1098,7 +1126,7 @@ CONFIG_DUMMY_CONSOLE=y # # HID Devices # -CONFIG_HID=y +CONFIG_HID=m # # USB support @@ -1115,7 +1143,6 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -1136,7 +1163,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # USB Device Class drivers # # CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set +CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1371,7 +1398,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set @@ -1461,7 +1492,12 @@ CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1495,7 +1531,7 @@ CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set +CONFIG_NLS_CODEPAGE_932=m # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set @@ -1526,12 +1562,14 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m CONFIG_PLIST=y CONFIG_IOMAP_COPY=y diff --git a/arch/powerpc/configs/mpc8313_rdb_defconfig b/arch/powerpc/configs/mpc8313_rdb_defconfig new file mode 100644 index 00000000000..f87523716c4 --- /dev/null +++ b/arch/powerpc/configs/mpc8313_rdb_defconfig @@ -0,0 +1,1409 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Wed Feb 7 22:08:04 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +CONFIG_MPC8313_RDB=y +# CONFIG_MPC832x_MDS is not set +# CONFIG_MPC834x_SYS is not set +# CONFIG_MPC834x_ITX is not set +# CONFIG_MPC8360E_PB is not set +CONFIG_PPC_MPC831x=y +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xfe000000 +CONFIG_MTD_PHYSMAP_LEN=0x1000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +CONFIG_CICADA_PHY=y +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_MPC83xx=y + +# +# SPI Protocol Masters +# + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_NET2280=y +CONFIG_USB_NET2280=y +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# DMA Engine support +# +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y + +# +# DMA Devices +# +CONFIG_INTEL_IOATDMA=y + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig index 7902806429f..23d8964846e 100644 --- a/arch/powerpc/configs/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Fri Jan 26 00:19:02 2007 +# Linux kernel version: 2.6.20 +# Wed Feb 7 13:12:18 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_PPC_83xx=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set -# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_6xx=y CONFIG_83xx=y @@ -178,7 +178,6 @@ CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set -# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -303,7 +302,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -523,6 +521,7 @@ CONFIG_SCSI_SPI_ATTRS=y # Serial ATA (prod) and Parallel ATA (experimental) drivers # CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set @@ -647,37 +646,7 @@ CONFIG_CICADA_PHY=y # # Ethernet (10 or 100Mbit) # -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set +# CONFIG_NET_ETHERNET is not set # # Ethernet (1000 Mbit) @@ -693,7 +662,6 @@ CONFIG_E100=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y @@ -746,26 +714,7 @@ CONFIG_GFAR_NAPI=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -784,7 +733,7 @@ CONFIG_INPUT=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y +# CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -887,7 +836,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set +CONFIG_SENSORS_PCF8574=y # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_M41T00 is not set @@ -901,7 +850,6 @@ CONFIG_I2C_MPC=y # SPI support # CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # @@ -922,52 +870,8 @@ CONFIG_SPI_MPC83xx=y # # Hardware Monitoring support # -CONFIG_HWMON=y +# CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM70 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # # Multimedia devices @@ -983,7 +887,7 @@ CONFIG_HWMON=y # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -994,11 +898,6 @@ CONFIG_FIRMWARE_EDID=y # CONFIG_SOUND is not set # -# HID Devices -# -CONFIG_HID=y - -# # USB support # CONFIG_USB_ARCH_HAS_HCD=y @@ -1023,10 +922,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # @@ -1058,25 +955,10 @@ CONFIG_USB_STORAGE=y # # USB Input Devices # -# CONFIG_USB_HID is not set # # USB HID Boot Protocol drivers # -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -1133,25 +1015,7 @@ CONFIG_USB_MON=y # # USB Gadget Support # -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -CONFIG_USB_GADGET_NET2280=y -CONFIG_USB_NET2280=y -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -CONFIG_USB_GADGET_DUALSPEED=y -# CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_GADGET is not set # # MMC/SD Card support @@ -1273,8 +1137,11 @@ CONFIG_DNOTIFY=y # # DOS/FAT/NT Filesystems # -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -1340,7 +1207,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set @@ -1356,7 +1223,46 @@ CONFIG_MSDOS_PARTITION=y # # Native Language Support # -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # # Distributed Lock Manager @@ -1388,27 +1294,9 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_DEBUGGER is not set -# CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_SERIAL_TEXT_DEBUG is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/mpc834x_itxgp_defconfig b/arch/powerpc/configs/mpc834x_itxgp_defconfig new file mode 100644 index 00000000000..4aa666c9cb9 --- /dev/null +++ b/arch/powerpc/configs/mpc834x_itxgp_defconfig @@ -0,0 +1,1174 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Fri Feb 9 13:28:19 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC832x_MDS is not set +# CONFIG_MPC834x_SYS is not set +CONFIG_MPC834x_ITX=y +# CONFIG_MPC8360E_PB is not set +CONFIG_MPC834x=y +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xfe000000 +CONFIG_MTD_PHYSMAP_LEN=0x800000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +CONFIG_CICADA_PHY=y +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y +# CONFIG_QLA3XXX is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +CONFIG_SENSORS_PCF8574=y +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_MPC83xx=y + +# +# SPI Protocol Masters +# + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# DMA Engine support +# +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y + +# +# DMA Devices +# +CONFIG_INTEL_IOATDMA=y + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/mpc834x_mds_defconfig index 9eaed3a3698..2e3f8efb6ab 100644 --- a/arch/powerpc/configs/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Fri Jan 26 00:19:27 2007 +# Linux kernel version: 2.6.20 +# Thu Feb 8 01:00:48 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_PPC_83xx=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set -# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_6xx=y CONFIG_83xx=y @@ -128,8 +128,9 @@ CONFIG_PPC_GEN550=y # # Platform support # +# CONFIG_MPC8313_RDB is not set # CONFIG_MPC832x_MDS is not set -CONFIG_MPC834x_SYS=y +CONFIG_MPC834x_MDS=y # CONFIG_MPC834x_ITX is not set # CONFIG_MPC8360E_PB is not set CONFIG_MPC834x=y diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/mpc8568mds_defconfig new file mode 100644 index 00000000000..058e06d88bc --- /dev/null +++ b/arch/powerpc/configs/mpc8568mds_defconfig @@ -0,0 +1,992 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20-rc5 +# Wed Feb 7 23:54:25 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_86xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_85xx=y +CONFIG_E500=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_MPC85xx_CDS is not set +CONFIG_MPC8568_MDS=y +CONFIG_MPC85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y +CONFIG_MPIC=y + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_MATH_EMULATION=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y + +# +# Ethernet (1000 Mbit) +# +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_BOOKE_WDT is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y + +# +# Instrumentation Support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUGGER=y +# CONFIG_XMON is not set +# CONFIG_BDI_SWITCH is not set +CONFIG_BOOTX_TEXT=y +CONFIG_PPC_EARLY_DEBUG=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index 93f21aaf7c8..3678997339d 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -18,6 +18,7 @@ #include <asm/io.h> #include <asm/lmb.h> #include <asm/processor.h> +#include <asm/udbg.h> #define NO_SCROLL @@ -912,3 +913,11 @@ static unsigned char vga_font[cmapsz] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }; + +void __init udbg_init_btext(void) +{ + /* If btext is enabled, we might have a BAT setup for early display, + * thus we do enable some very basic udbg output + */ + udbg_putc = btext_drawchar; +} diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index dd17dffbf05..7ec4ac77c0f 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -44,7 +44,7 @@ extern void __setup_cpu_745x(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_pa6t(unsigned long offset, struct cpu_spec* spec); -extern void __restore_cpu_pa6t(unsigned long offset, struct cpu_spec* spec); +extern void __restore_cpu_pa6t(void); extern void __restore_cpu_ppc970(void); #endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index accb39d4991..a15d4b8cce4 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -32,8 +32,6 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm/pgtable.h> -#include <asm/ibm4xx.h> -#include <asm/ibm44x.h> #include <asm/cputable.h> #include <asm/thread_info.h> #include <asm/ppc_asm.h> diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 66877bdfe0b..1f155d399d5 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -206,7 +206,8 @@ skpinv: addi r6,r6,1 /* Increment */ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ mtspr SPRN_MAS0,r7 tlbre - li r6,0 + mfspr r6,SPRN_MAS1 + rlwinm r6,r6,0,2,0 /* clear IPROT */ mtspr SPRN_MAS1,r6 tlbwe /* Invalidate TLB1 */ @@ -248,6 +249,8 @@ skpinv: addi r6,r6,1 /* Increment */ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ mtspr SPRN_MAS0,r7 tlbre + mfspr r8,SPRN_MAS1 + rlwinm r8,r8,0,2,0 /* clear IPROT */ mtspr SPRN_MAS1,r8 tlbwe /* Invalidate TLB1 */ @@ -889,7 +892,6 @@ load_up_spe: REST_GPR(9, r11) REST_GPR(12, r11) lwz r11,GPR11(r11) - SYNC rfi /* @@ -953,7 +955,6 @@ _GLOBAL(giveup_altivec) _GLOBAL(giveup_spe) mfmsr r5 oris r5,r5,MSR_SPE@h - SYNC mtmsr r5 /* enable use of SPE now */ isync cmpi 0,r3,0 diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index 8994af327b4..6e7f50967ba 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -110,17 +110,22 @@ static ctl_table powersave_nap_ctl_table[]={ .mode = 0644, .proc_handler = &proc_dointvec, }, - { 0, }, + {} }; static ctl_table powersave_nap_sysctl_root[] = { - { 1, "kernel", NULL, 0, 0755, powersave_nap_ctl_table, }, - { 0,}, + { + .ctl_name = CTL_KERN, + .procname = "kernel", + .mode = 0755, + .child = powersave_nap_ctl_table, + }, + {} }; static int __init register_powersave_nap_sysctl(void) { - register_sysctl_table(powersave_nap_sysctl_root, 0); + register_sysctl_table(powersave_nap_sysctl_root); return 0; } diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 89f46f37792..325f490a10c 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -124,6 +124,10 @@ static int __init add_legacy_soc_port(struct device_node *np, if (get_property(np, "clock-frequency", NULL) == NULL) return -1; + /* if rtas uses this device, don't try to use it as well */ + if (get_property(np, "used-by-rtas", NULL) != NULL) + return -1; + /* Get the address */ addrp = of_get_address(soc_dev, 0, NULL, NULL); if (addrp == NULL) @@ -334,6 +338,17 @@ void __init find_legacy_serial_ports(void) of_node_put(tsi); } + /* First fill our array with opb bus ports */ + for (np = NULL; (np = of_find_compatible_node(np, "serial", "ns16750")) != NULL;) { + struct device_node *opb = of_get_parent(np); + if (opb && !strcmp(opb->type, "opb")) { + index = add_legacy_soc_port(np, np); + if (index >= 0 && np == stdout) + legacy_serial_console = index; + } + of_node_put(opb); + } + #ifdef CONFIG_PCI /* Next, try to locate PCI ports */ for (np = NULL; (np = of_find_all_nodes(np));) { diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 520ef42f642..4fb5938ce6d 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2117,11 +2117,92 @@ static void __init fixup_device_tree_pmac(void) #define fixup_device_tree_pmac() #endif +#ifdef CONFIG_PPC_EFIKA +/* The current fw of the Efika has a device tree needs quite a few + * fixups to be compliant with the mpc52xx bindings. It's currently + * unknown if it will ever be compliant (come on bPlan ...) so we do fixups. + * NOTE that we (barely) tolerate it because the EFIKA was out before + * the bindings were finished, for any new boards -> RTFM ! */ + +struct subst_entry { + char *path; + char *property; + void *value; + int value_len; +}; + +static void __init fixup_device_tree_efika(void) +{ + /* Substitution table */ + #define prop_cstr(x) x, sizeof(x) + int prop_sound_irq[3] = { 2, 2, 0 }; + int prop_bcomm_irq[3*16] = { 3,0,0, 3,1,0, 3,2,0, 3,3,0, + 3,4,0, 3,5,0, 3,6,0, 3,7,0, + 3,8,0, 3,9,0, 3,10,0, 3,11,0, + 3,12,0, 3,13,0, 3,14,0, 3,15,0 }; + struct subst_entry efika_subst_table[] = { + { "/", "device_type", prop_cstr("efika") }, + { "/builtin", "compatible", prop_cstr("soc") }, + { "/builtin/ata", "compatible", prop_cstr("mpc5200b-ata\0mpc5200-ata"), }, + { "/builtin/bestcomm", "compatible", prop_cstr("mpc5200b-bestcomm\0mpc5200-bestcomm") }, + { "/builtin/bestcomm", "interrupts", prop_bcomm_irq, sizeof(prop_bcomm_irq) }, + { "/builtin/ethernet", "compatible", prop_cstr("mpc5200b-fec\0mpc5200-fec") }, + { "/builtin/pic", "compatible", prop_cstr("mpc5200b-pic\0mpc5200-pic") }, + { "/builtin/serial", "compatible", prop_cstr("mpc5200b-psc-uart\0mpc5200-psc-uart") }, + { "/builtin/sound", "compatible", prop_cstr("mpc5200b-psc-ac97\0mpc5200-psc-ac97") }, + { "/builtin/sound", "interrupts", prop_sound_irq, sizeof(prop_sound_irq) }, + { "/builtin/sram", "compatible", prop_cstr("mpc5200b-sram\0mpc5200-sram") }, + { "/builtin/sram", "device_type", prop_cstr("sram") }, + {} + }; + #undef prop_cstr + + /* Vars */ + u32 node; + char prop[64]; + int rv, i; + + /* Check if we're really running on a EFIKA */ + node = call_prom("finddevice", 1, 1, ADDR("/")); + if (!PHANDLE_VALID(node)) + return; + + rv = prom_getprop(node, "model", prop, sizeof(prop)); + if (rv == PROM_ERROR) + return; + if (strcmp(prop, "EFIKA5K2")) + return; + + prom_printf("Applying EFIKA device tree fixups\n"); + + /* Process substitution table */ + for (i=0; efika_subst_table[i].path; i++) { + struct subst_entry *se = &efika_subst_table[i]; + + node = call_prom("finddevice", 1, 1, ADDR(se->path)); + if (!PHANDLE_VALID(node)) { + prom_printf("fixup_device_tree_efika: ", + "skipped entry %x - not found\n", i); + continue; + } + + rv = prom_setprop(node, se->path, se->property, + se->value, se->value_len ); + if (rv == PROM_ERROR) + prom_printf("fixup_device_tree_efika: ", + "skipped entry %x - setprop error\n", i); + } +} +#else +#define fixup_device_tree_efika() +#endif + static void __init fixup_device_tree(void) { fixup_device_tree_maple(); fixup_device_tree_chrp(); fixup_device_tree_pmac(); + fixup_device_tree_efika(); } static void __init prom_find_boot_cpu(void) diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 6a19fa40dce..44a6a3c47fe 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -116,12 +116,8 @@ unsigned long __init early_init(unsigned long dt_ptr) */ void __init machine_init(unsigned long dt_ptr, unsigned long phys) { - /* If btext is enabled, we might have a BAT setup for early display, - * thus we do enable some very basic udbg output - */ -#ifdef CONFIG_BOOTX_TEXT - udbg_putc = btext_drawchar; -#endif + /* Enable early debugging if any specified (see udbg.h) */ + udbg_early_init(); /* Do some early initialization based on the flat device tree */ early_init_devtree(__va(dt_ptr)); diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 0e8beca460a..924d692bc8f 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -78,29 +78,6 @@ int smt_enabled_at_boot = 1; static void (*crash_ipi_function_ptr)(struct pt_regs *) = NULL; -#ifdef CONFIG_MPIC -int __init smp_mpic_probe(void) -{ - int nr_cpus; - - DBG("smp_mpic_probe()...\n"); - - nr_cpus = cpus_weight(cpu_possible_map); - - DBG("nr_cpus: %d\n", nr_cpus); - - if (nr_cpus > 1) - mpic_request_ipis(); - - return nr_cpus; -} - -void __devinit smp_mpic_setup_cpu(int cpu) -{ - mpic_setup_this_cpu(); -} -#endif /* CONFIG_MPIC */ - #ifdef CONFIG_PPC64 void __devinit smp_generic_kick_cpu(int nr) { diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 194a93eeb3e..7e0971868fc 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -49,6 +49,8 @@ void __init udbg_early_init(void) udbg_init_debug_beat(); #elif defined(CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE) udbg_init_pas_realmode(); +#elif defined(CONFIG_BOOTX_TEXT) + udbg_init_btext(); #endif } diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index 50149ec6efa..e46c31b3664 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -49,24 +49,23 @@ /* Max supported size for symbol names */ #define MAX_SYMNAME 64 -#define VDSO32_MAXPAGES (((0x3000 + PAGE_MASK) >> PAGE_SHIFT) + 2) -#define VDSO64_MAXPAGES (((0x3000 + PAGE_MASK) >> PAGE_SHIFT) + 2) - extern char vdso32_start, vdso32_end; static void *vdso32_kbase = &vdso32_start; -unsigned int vdso32_pages; -static struct page *vdso32_pagelist[VDSO32_MAXPAGES]; +static unsigned int vdso32_pages; +static struct page **vdso32_pagelist; unsigned long vdso32_sigtramp; unsigned long vdso32_rt_sigtramp; #ifdef CONFIG_PPC64 extern char vdso64_start, vdso64_end; static void *vdso64_kbase = &vdso64_start; -unsigned int vdso64_pages; -static struct page *vdso64_pagelist[VDSO64_MAXPAGES]; +static unsigned int vdso64_pages; +static struct page **vdso64_pagelist; unsigned long vdso64_rt_sigtramp; #endif /* CONFIG_PPC64 */ +static int vdso_ready; + /* * The vdso data page (aka. systemcfg for old ppc64 fans) is here. * Once the early boot kernel code no longer needs to muck around @@ -182,6 +181,9 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, unsigned long vdso_base; int rc; + if (!vdso_ready) + return 0; + #ifdef CONFIG_PPC64 if (test_thread_flag(TIF_32BIT)) { vdso_pagelist = vdso32_pagelist; @@ -661,7 +663,7 @@ static void __init vdso_setup_syscall_map(void) } -void __init vdso_init(void) +static int __init vdso_init(void) { int i; @@ -716,11 +718,13 @@ void __init vdso_init(void) #ifdef CONFIG_PPC64 vdso64_pages = 0; #endif - return; + return 0; } /* Make sure pages are in the correct state */ - BUG_ON(vdso32_pages + 2 > VDSO32_MAXPAGES); + vdso32_pagelist = kzalloc(sizeof(struct page *) * (vdso32_pages + 2), + GFP_KERNEL); + BUG_ON(vdso32_pagelist == NULL); for (i = 0; i < vdso32_pages; i++) { struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE); ClearPageReserved(pg); @@ -731,7 +735,9 @@ void __init vdso_init(void) vdso32_pagelist[i] = NULL; #ifdef CONFIG_PPC64 - BUG_ON(vdso64_pages + 2 > VDSO64_MAXPAGES); + vdso64_pagelist = kzalloc(sizeof(struct page *) * (vdso64_pages + 2), + GFP_KERNEL); + BUG_ON(vdso64_pagelist == NULL); for (i = 0; i < vdso64_pages; i++) { struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE); ClearPageReserved(pg); @@ -743,7 +749,13 @@ void __init vdso_init(void) #endif /* CONFIG_PPC64 */ get_page(virt_to_page(vdso_data)); + + smp_wmb(); + vdso_ready = 1; + + return 0; } +arch_initcall(vdso_init); int in_gate_area_no_task(unsigned long addr) { diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 77b4637097e..52f397c108a 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -384,9 +384,6 @@ void __init mem_init(void) initsize >> 10); mem_init_done = 1; - - /* Initialize the vDSO */ - vdso_init(); } /* diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index bd02272bcb0..c284bdac994 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -295,7 +295,7 @@ void __init mapin_ram(void) } /* is x a power of 4? */ -#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)) +#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1) /* * Set up a mapping for a block of I/O. diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 2eb15f38810..e08e1d7b3dc 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -39,10 +39,17 @@ #include "../platforms/cell/interrupt.h" #define PPU_CYCLES_EVENT_NUM 1 /* event number for CYCLES */ +#define PPU_CYCLES_GRP_NUM 1 /* special group number for identifying + * PPU_CYCLES event + */ #define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */ -#define NUM_THREADS 2 -#define VIRT_CNTR_SW_TIME_NS 100000000 // 0.5 seconds +#define NUM_THREADS 2 /* number of physical threads in + * physical processor + */ +#define NUM_TRACE_BUS_WORDS 4 +#define NUM_INPUT_BUS_WORDS 2 + struct pmc_cntrl_data { unsigned long vcntr; @@ -58,7 +65,7 @@ struct pmc_cntrl_data { struct pm_signal { u16 cpu; /* Processor to modify */ u16 sub_unit; /* hw subunit this applies to (if applicable) */ - u16 signal_group; /* Signal Group to Enable/Disable */ + short int signal_group; /* Signal Group to Enable/Disable */ u8 bus_word; /* Enable/Disable on this Trace/Trigger/Event * Bus Word(s) (bitmask) */ @@ -93,7 +100,6 @@ static struct { u32 pm07_cntrl[NR_PHYS_CTRS]; } pm_regs; - #define GET_SUB_UNIT(x) ((x & 0x0000f000) >> 12) #define GET_BUS_WORD(x) ((x & 0x000000f0) >> 4) #define GET_BUS_TYPE(x) ((x & 0x00000300) >> 8) @@ -101,7 +107,6 @@ static struct { #define GET_COUNT_CYCLES(x) (x & 0x00000001) #define GET_INPUT_CONTROL(x) ((x & 0x00000004) >> 2) - static DEFINE_PER_CPU(unsigned long[NR_PHYS_CTRS], pmc_values); static struct pmc_cntrl_data pmc_cntrl[NUM_THREADS][NR_PHYS_CTRS]; @@ -129,8 +134,8 @@ static spinlock_t virt_cntr_lock = SPIN_LOCK_UNLOCKED; static u32 ctr_enabled; -static unsigned char trace_bus[4]; -static unsigned char input_bus[2]; +static unsigned char trace_bus[NUM_TRACE_BUS_WORDS]; +static unsigned char input_bus[NUM_INPUT_BUS_WORDS]; /* * Firmware interface functions @@ -177,25 +182,40 @@ static void pm_rtas_reset_signals(u32 node) static void pm_rtas_activate_signals(u32 node, u32 count) { int ret; - int j; + int i, j; struct pm_signal pm_signal_local[NR_PHYS_CTRS]; + /* There is no debug setup required for the cycles event. + * Note that only events in the same group can be used. + * Otherwise, there will be conflicts in correctly routing + * the signals on the debug bus. It is the responsiblity + * of the OProfile user tool to check the events are in + * the same group. + */ + i = 0; for (j = 0; j < count; j++) { - /* fw expects physical cpu # */ - pm_signal_local[j].cpu = node; - pm_signal_local[j].signal_group = pm_signal[j].signal_group; - pm_signal_local[j].bus_word = pm_signal[j].bus_word; - pm_signal_local[j].sub_unit = pm_signal[j].sub_unit; - pm_signal_local[j].bit = pm_signal[j].bit; + if (pm_signal[j].signal_group != PPU_CYCLES_GRP_NUM) { + + /* fw expects physical cpu # */ + pm_signal_local[i].cpu = node; + pm_signal_local[i].signal_group + = pm_signal[j].signal_group; + pm_signal_local[i].bus_word = pm_signal[j].bus_word; + pm_signal_local[i].sub_unit = pm_signal[j].sub_unit; + pm_signal_local[i].bit = pm_signal[j].bit; + i++; + } } - ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE, - pm_signal_local, - count * sizeof(struct pm_signal)); + if (i != 0) { + ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE, + pm_signal_local, + i * sizeof(struct pm_signal)); - if (ret) - printk(KERN_WARNING "%s: rtas returned: %d\n", - __FUNCTION__, ret); + if (ret) + printk(KERN_WARNING "%s: rtas returned: %d\n", + __FUNCTION__, ret); + } } /* @@ -212,7 +232,7 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask) /* Special Event: Count all cpu cycles */ pm_regs.pm07_cntrl[ctr] = CBE_COUNT_ALL_CYCLES; p = &(pm_signal[ctr]); - p->signal_group = 21; + p->signal_group = PPU_CYCLES_GRP_NUM; p->bus_word = 1; p->sub_unit = 0; p->bit = 0; @@ -232,13 +252,21 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask) p->signal_group = event / 100; p->bus_word = bus_word; - p->sub_unit = unit_mask & 0x0000f000; + p->sub_unit = (unit_mask & 0x0000f000) >> 12; pm_regs.pm07_cntrl[ctr] = 0; pm_regs.pm07_cntrl[ctr] |= PM07_CTR_COUNT_CYCLES(count_cycles); pm_regs.pm07_cntrl[ctr] |= PM07_CTR_POLARITY(polarity); pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_CONTROL(input_control); + /* Some of the islands signal selection is based on 64 bit words. + * The debug bus words are 32 bits, the input words to the performance + * counters are defined as 32 bits. Need to convert the 64 bit island + * specification to the appropriate 32 input bit and bus word for the + * performance counter event selection. See the CELL Performance + * monitoring signals manual and the Perf cntr hardware descriptions + * for the details. + */ if (input_control == 0) { if (signal_bit > 31) { signal_bit -= 32; @@ -259,12 +287,12 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask) p->bit = signal_bit; } - for (i = 0; i < 4; i++) { + for (i = 0; i < NUM_TRACE_BUS_WORDS; i++) { if (bus_word & (1 << i)) { pm_regs.debug_bus_control |= (bus_type << (31 - (2 * i) + 1)); - for (j = 0; j < 2; j++) { + for (j = 0; j < NUM_INPUT_BUS_WORDS; j++) { if (input_bus[j] == 0xff) { input_bus[j] = i; pm_regs.group_control |= @@ -278,52 +306,58 @@ out: ; } -static void write_pm_cntrl(int cpu, struct pm_cntrl *pm_cntrl) +static void write_pm_cntrl(int cpu) { - /* Oprofile will use 32 bit counters, set bits 7:10 to 0 */ + /* Oprofile will use 32 bit counters, set bits 7:10 to 0 + * pmregs.pm_cntrl is a global + */ + u32 val = 0; - if (pm_cntrl->enable == 1) + if (pm_regs.pm_cntrl.enable == 1) val |= CBE_PM_ENABLE_PERF_MON; - if (pm_cntrl->stop_at_max == 1) + if (pm_regs.pm_cntrl.stop_at_max == 1) val |= CBE_PM_STOP_AT_MAX; - if (pm_cntrl->trace_mode == 1) - val |= CBE_PM_TRACE_MODE_SET(pm_cntrl->trace_mode); + if (pm_regs.pm_cntrl.trace_mode == 1) + val |= CBE_PM_TRACE_MODE_SET(pm_regs.pm_cntrl.trace_mode); - if (pm_cntrl->freeze == 1) + if (pm_regs.pm_cntrl.freeze == 1) val |= CBE_PM_FREEZE_ALL_CTRS; /* Routine set_count_mode must be called previously to set * the count mode based on the user selection of user and kernel. */ - val |= CBE_PM_COUNT_MODE_SET(pm_cntrl->count_mode); + val |= CBE_PM_COUNT_MODE_SET(pm_regs.pm_cntrl.count_mode); cbe_write_pm(cpu, pm_control, val); } static inline void -set_count_mode(u32 kernel, u32 user, struct pm_cntrl *pm_cntrl) +set_count_mode(u32 kernel, u32 user) { /* The user must specify user and kernel if they want them. If - * neither is specified, OProfile will count in hypervisor mode + * neither is specified, OProfile will count in hypervisor mode. + * pm_regs.pm_cntrl is a global */ if (kernel) { if (user) - pm_cntrl->count_mode = CBE_COUNT_ALL_MODES; + pm_regs.pm_cntrl.count_mode = CBE_COUNT_ALL_MODES; else - pm_cntrl->count_mode = CBE_COUNT_SUPERVISOR_MODE; + pm_regs.pm_cntrl.count_mode = + CBE_COUNT_SUPERVISOR_MODE; } else { if (user) - pm_cntrl->count_mode = CBE_COUNT_PROBLEM_MODE; + pm_regs.pm_cntrl.count_mode = CBE_COUNT_PROBLEM_MODE; else - pm_cntrl->count_mode = CBE_COUNT_HYPERVISOR_MODE; + pm_regs.pm_cntrl.count_mode = + CBE_COUNT_HYPERVISOR_MODE; } } static inline void enable_ctr(u32 cpu, u32 ctr, u32 * pm07_cntrl) { - pm07_cntrl[ctr] |= PM07_CTR_ENABLE(1); + pm07_cntrl[ctr] |= CBE_PM_CTR_ENABLE; cbe_write_pm07_control(cpu, ctr, pm07_cntrl[ctr]); } @@ -365,6 +399,14 @@ static void cell_virtual_cntr(unsigned long data) hdw_thread = 1 ^ hdw_thread; next_hdw_thread = hdw_thread; + for (i = 0; i < num_counters; i++) + /* There are some per thread events. Must do the + * set event, for the thread that is being started + */ + set_pm_event(i, + pmc_cntrl[next_hdw_thread][i].evnts, + pmc_cntrl[next_hdw_thread][i].masks); + /* The following is done only once per each node, but * we need cpu #, not node #, to pass to the cbe_xxx functions. */ @@ -385,12 +427,13 @@ static void cell_virtual_cntr(unsigned long data) == 0xFFFFFFFF) /* If the cntr value is 0xffffffff, we must * reset that to 0xfffffff0 when the current - * thread is restarted. This will generate a new - * interrupt and make sure that we never restore - * the counters to the max value. If the counters - * were restored to the max value, they do not - * increment and no interrupts are generated. Hence - * no more samples will be collected on that cpu. + * thread is restarted. This will generate a + * new interrupt and make sure that we never + * restore the counters to the max value. If + * the counters were restored to the max value, + * they do not increment and no interrupts are + * generated. Hence no more samples will be + * collected on that cpu. */ cbe_write_ctr(cpu, i, 0xFFFFFFF0); else @@ -410,9 +453,6 @@ static void cell_virtual_cntr(unsigned long data) * Must do the set event, enable_cntr * for each cpu. */ - set_pm_event(i, - pmc_cntrl[next_hdw_thread][i].evnts, - pmc_cntrl[next_hdw_thread][i].masks); enable_ctr(cpu, i, pm_regs.pm07_cntrl); } else { @@ -465,8 +505,7 @@ cell_reg_setup(struct op_counter_config *ctr, pm_regs.pm_cntrl.trace_mode = 0; pm_regs.pm_cntrl.freeze = 1; - set_count_mode(sys->enable_kernel, sys->enable_user, - &pm_regs.pm_cntrl); + set_count_mode(sys->enable_kernel, sys->enable_user); /* Setup the thread 0 events */ for (i = 0; i < num_ctrs; ++i) { @@ -498,10 +537,10 @@ cell_reg_setup(struct op_counter_config *ctr, pmc_cntrl[1][i].vcntr = i; } - for (i = 0; i < 4; i++) + for (i = 0; i < NUM_TRACE_BUS_WORDS; i++) trace_bus[i] = 0xff; - for (i = 0; i < 2; i++) + for (i = 0; i < NUM_INPUT_BUS_WORDS; i++) input_bus[i] = 0xff; /* Our counters count up, and "count" refers to @@ -560,7 +599,7 @@ static void cell_cpu_setup(struct op_counter_config *cntr) cbe_write_pm(cpu, pm_start_stop, 0); cbe_write_pm(cpu, group_control, pm_regs.group_control); cbe_write_pm(cpu, debug_bus_control, pm_regs.debug_bus_control); - write_pm_cntrl(cpu, &pm_regs.pm_cntrl); + write_pm_cntrl(cpu); for (i = 0; i < num_counters; ++i) { if (ctr_enabled & (1 << i)) { @@ -602,7 +641,7 @@ static void cell_global_start(struct op_counter_config *ctr) } } - cbe_clear_pm_interrupts(cpu); + cbe_get_and_clear_pm_interrupts(cpu); cbe_enable_pm_interrupts(cpu, hdw_thread, interrupt_mask); cbe_enable_pm(cpu); } @@ -672,7 +711,7 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) cbe_disable_pm(cpu); - interrupt_mask = cbe_clear_pm_interrupts(cpu); + interrupt_mask = cbe_get_and_clear_pm_interrupts(cpu); /* If the interrupt mask has been cleared, then the virt cntr * has cleared the interrupt. When the thread that generated diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index 795b713ec9e..07cdbcacf15 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -6,5 +6,5 @@ obj-y += mpc52xx_pic.o mpc52xx_common.o obj-$(CONFIG_PCI) += mpc52xx_pci.o endif -obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o +obj-$(CONFIG_PPC_EFIKA) += efika.o obj-$(CONFIG_PPC_LITE5200) += lite5200.o diff --git a/arch/powerpc/platforms/52xx/efika-pci.c b/arch/powerpc/platforms/52xx/efika-pci.c deleted file mode 100644 index 62e05b2a922..00000000000 --- a/arch/powerpc/platforms/52xx/efika-pci.c +++ /dev/null @@ -1,119 +0,0 @@ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/string.h> -#include <linux/init.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/prom.h> -#include <asm/machdep.h> -#include <asm/sections.h> -#include <asm/pci-bridge.h> -#include <asm/rtas.h> - -#include "efika.h" - -#ifdef CONFIG_PCI -/* - * Access functions for PCI config space using RTAS calls. - */ -static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 * val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - int ret = -1; - int rval; - - rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); - *val = ret; - return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -} - -static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - int rval; - - rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, - addr, len, val); - return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops rtas_pci_ops = { - rtas_read_config, - rtas_write_config -}; - -void __init efika_pcisetup(void) -{ - const int *bus_range; - int len; - struct pci_controller *hose; - struct device_node *root; - struct device_node *pcictrl; - - root = of_find_node_by_path("/"); - if (root == NULL) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Unable to find the root node\n"); - return; - } - - for (pcictrl = NULL;;) { - pcictrl = of_get_next_child(root, pcictrl); - if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0)) - break; - } - - of_node_put(root); - - if (pcictrl == NULL) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Unable to find the PCI bridge node\n"); - return; - } - - bus_range = get_property(pcictrl, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Can't get bus-range for %s\n", pcictrl->full_name); - return; - } - - if (bus_range[1] == bus_range[0]) - printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d", - bus_range[0]); - else - printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d", - bus_range[0], bus_range[1]); - printk(" controlled by %s\n", pcictrl->full_name); - printk("\n"); - - hose = pcibios_alloc_controller(); - if (!hose) { - printk(KERN_WARNING EFIKA_PLATFORM_NAME - ": Can't allocate PCI controller structure for %s\n", - pcictrl->full_name); - return; - } - - hose->arch_data = of_node_get(pcictrl); - hose->first_busno = bus_range[0]; - hose->last_busno = bus_range[1]; - hose->ops = &rtas_pci_ops; - - pci_process_bridge_OF_ranges(hose, pcictrl, 0); -} - -#else -void __init efika_pcisetup(void) -{} -#endif diff --git a/arch/powerpc/platforms/52xx/efika-setup.c b/arch/powerpc/platforms/52xx/efika-setup.c deleted file mode 100644 index 110c980ed1e..00000000000 --- a/arch/powerpc/platforms/52xx/efika-setup.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * - * Efika 5K2 platform setup - * Some code really inspired from the lite5200b platform. - * - * Copyright (C) 2006 bplan GmbH - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/reboot.h> -#include <linux/init.h> -#include <linux/utsrelease.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/initrd.h> -#include <linux/timer.h> -#include <linux/pci.h> - -#include <asm/pgtable.h> -#include <asm/prom.h> -#include <asm/time.h> -#include <asm/machdep.h> -#include <asm/rtas.h> -#include <asm/of_device.h> -#include <asm/of_platform.h> -#include <asm/mpc52xx.h> - -#include "efika.h" - -static void efika_show_cpuinfo(struct seq_file *m) -{ - struct device_node *root; - const char *revision = NULL; - const char *codegendescription = NULL; - const char *codegenvendor = NULL; - - root = of_find_node_by_path("/"); - if (root) { - revision = get_property(root, "revision", NULL); - codegendescription = - get_property(root, "CODEGEN,description", NULL); - codegenvendor = get_property(root, "CODEGEN,vendor", NULL); - - of_node_put(root); - } - - if (codegendescription) - seq_printf(m, "machine\t\t: %s\n", codegendescription); - else - seq_printf(m, "machine\t\t: Efika\n"); - - if (revision) - seq_printf(m, "revision\t: %s\n", revision); - - if (codegenvendor) - seq_printf(m, "vendor\t\t: %s\n", codegenvendor); - - of_node_put(root); -} - -static void __init efika_setup_arch(void) -{ - rtas_initialize(); - -#ifdef CONFIG_BLK_DEV_INITRD - initrd_below_start_ok = 1; - - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif - ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ - - efika_pcisetup(); - - if (ppc_md.progress) - ppc_md.progress("Linux/PPC " UTS_RELEASE " runnung on Efika ;-)\n", 0x0); -} - -static void __init efika_init(void) -{ - struct device_node *np; - struct device_node *cnp = NULL; - const u32 *base; - - /* Find every child of the SOC node and add it to of_platform */ - np = of_find_node_by_name(NULL, "builtin"); - if (np) { - char name[BUS_ID_SIZE]; - while ((cnp = of_get_next_child(np, cnp))) { - strcpy(name, cnp->name); - - base = get_property(cnp, "reg", NULL); - if (base == NULL) - continue; - - snprintf(name+strlen(name), BUS_ID_SIZE, "@%x", *base); - of_platform_device_create(cnp, name, NULL); - - printk(KERN_INFO EFIKA_PLATFORM_NAME" : Added %s (type '%s' at '%s') to the known devices\n", name, cnp->type, cnp->full_name); - } - } - - if (ppc_md.progress) - ppc_md.progress(" Have fun with your Efika! ", 0x7777); -} - -static int __init efika_probe(void) -{ - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); - - if (model == NULL) - return 0; - if (strcmp(model, "EFIKA5K2")) - return 0; - - ISA_DMA_THRESHOLD = ~0L; - DMA_MODE_READ = 0x44; - DMA_MODE_WRITE = 0x48; - - return 1; -} - -define_machine(efika) -{ - .name = EFIKA_PLATFORM_NAME, - .probe = efika_probe, - .setup_arch = efika_setup_arch, - .init = efika_init, - .show_cpuinfo = efika_show_cpuinfo, - .init_IRQ = mpc52xx_init_irq, - .get_irq = mpc52xx_get_irq, - .restart = rtas_restart, - .power_off = rtas_power_off, - .halt = rtas_halt, - .set_rtc_time = rtas_set_rtc_time, - .get_rtc_time = rtas_get_rtc_time, - .progress = rtas_progress, - .get_boot_time = rtas_get_boot_time, - .calibrate_decr = generic_calibrate_decr, - .phys_mem_access_prot = pci_phys_mem_access_prot, -}; diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c new file mode 100644 index 00000000000..8de03411668 --- /dev/null +++ b/arch/powerpc/platforms/52xx/efika.c @@ -0,0 +1,243 @@ +/* + * Efika 5K2 platform code + * Some code really inspired from the lite5200b platform. + * + * Copyright (C) 2006 bplan GmbH + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/utsrelease.h> +#include <linux/seq_file.h> +#include <linux/string.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <linux/timer.h> +#include <linux/pci.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/sections.h> +#include <asm/pci-bridge.h> +#include <asm/pgtable.h> +#include <asm/prom.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/rtas.h> +#include <asm/of_device.h> +#include <asm/of_platform.h> +#include <asm/mpc52xx.h> + + +#define EFIKA_PLATFORM_NAME "Efika" + + +/* ------------------------------------------------------------------------ */ +/* PCI accesses thru RTAS */ +/* ------------------------------------------------------------------------ */ + +#ifdef CONFIG_PCI + +/* + * Access functions for PCI config space using RTAS calls. + */ +static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 * val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int ret = -1; + int rval; + + rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); + *val = ret; + return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int rtas_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int rval; + + rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, + addr, len, val); + return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops rtas_pci_ops = { + rtas_read_config, + rtas_write_config +}; + + +void __init efika_pcisetup(void) +{ + const int *bus_range; + int len; + struct pci_controller *hose; + struct device_node *root; + struct device_node *pcictrl; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Unable to find the root node\n"); + return; + } + + for (pcictrl = NULL;;) { + pcictrl = of_get_next_child(root, pcictrl); + if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0)) + break; + } + + of_node_put(root); + + if (pcictrl == NULL) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Unable to find the PCI bridge node\n"); + return; + } + + bus_range = get_property(pcictrl, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Can't get bus-range for %s\n", pcictrl->full_name); + return; + } + + if (bus_range[1] == bus_range[0]) + printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d", + bus_range[0]); + else + printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d", + bus_range[0], bus_range[1]); + printk(" controlled by %s\n", pcictrl->full_name); + printk("\n"); + + hose = pcibios_alloc_controller(); + if (!hose) { + printk(KERN_WARNING EFIKA_PLATFORM_NAME + ": Can't allocate PCI controller structure for %s\n", + pcictrl->full_name); + return; + } + + hose->arch_data = of_node_get(pcictrl); + hose->first_busno = bus_range[0]; + hose->last_busno = bus_range[1]; + hose->ops = &rtas_pci_ops; + + pci_process_bridge_OF_ranges(hose, pcictrl, 0); +} + +#else +void __init efika_pcisetup(void) +{} +#endif + + + +/* ------------------------------------------------------------------------ */ +/* Platform setup */ +/* ------------------------------------------------------------------------ */ + +static void efika_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + const char *revision = NULL; + const char *codegendescription = NULL; + const char *codegenvendor = NULL; + + root = of_find_node_by_path("/"); + if (!root) + return; + + revision = get_property(root, "revision", NULL); + codegendescription = + get_property(root, "CODEGEN,description", NULL); + codegenvendor = get_property(root, "CODEGEN,vendor", NULL); + + if (codegendescription) + seq_printf(m, "machine\t\t: %s\n", codegendescription); + else + seq_printf(m, "machine\t\t: Efika\n"); + + if (revision) + seq_printf(m, "revision\t: %s\n", revision); + + if (codegenvendor) + seq_printf(m, "vendor\t\t: %s\n", codegenvendor); + + of_node_put(root); +} + +static void __init efika_setup_arch(void) +{ + rtas_initialize(); + +#ifdef CONFIG_BLK_DEV_INITRD + initrd_below_start_ok = 1; + + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif + ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ + + efika_pcisetup(); + + if (ppc_md.progress) + ppc_md.progress("Linux/PPC " UTS_RELEASE " running on Efika ;-)\n", 0x0); +} + +static int __init efika_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + + if (model == NULL) + return 0; + if (strcmp(model, "EFIKA5K2")) + return 0; + + ISA_DMA_THRESHOLD = ~0L; + DMA_MODE_READ = 0x44; + DMA_MODE_WRITE = 0x48; + + return 1; +} + +define_machine(efika) +{ + .name = EFIKA_PLATFORM_NAME, + .probe = efika_probe, + .setup_arch = efika_setup_arch, + .init = mpc52xx_declare_of_platform_devices, + .show_cpuinfo = efika_show_cpuinfo, + .init_IRQ = mpc52xx_init_irq, + .get_irq = mpc52xx_get_irq, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .set_rtc_time = rtas_set_rtc_time, + .get_rtc_time = rtas_get_rtc_time, + .progress = rtas_progress, + .get_boot_time = rtas_get_boot_time, + .calibrate_decr = generic_calibrate_decr, + .phys_mem_access_prot = pci_phys_mem_access_prot, +}; + diff --git a/arch/powerpc/platforms/52xx/efika.h b/arch/powerpc/platforms/52xx/efika.h deleted file mode 100644 index 2f060fd097d..00000000000 --- a/arch/powerpc/platforms/52xx/efika.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Efika 5K2 platform setup - Header file - * - * Copyright (C) 2006 bplan GmbH - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -#ifndef __ARCH_POWERPC_EFIKA__ -#define __ARCH_POWERPC_EFIKA__ - -#define EFIKA_PLATFORM_NAME "Efika" - -extern void __init efika_pcisetup(void); - -#endif diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c index cdb16bfa6ca..cc3b40de21d 100644 --- a/arch/powerpc/platforms/52xx/lite5200.c +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -51,13 +51,13 @@ */ static void __init -lite52xx_setup_cpu(void) +lite5200_setup_cpu(void) { struct mpc52xx_gpio __iomem *gpio; u32 port_config; /* Map zones */ - gpio = mpc52xx_find_and_map("mpc52xx-gpio"); + gpio = mpc52xx_find_and_map("mpc5200-gpio"); if (!gpio) { printk(KERN_ERR __FILE__ ": " "Error while mapping GPIO register for port config. " @@ -85,12 +85,12 @@ error: iounmap(gpio); } -static void __init lite52xx_setup_arch(void) +static void __init lite5200_setup_arch(void) { struct device_node *np; if (ppc_md.progress) - ppc_md.progress("lite52xx_setup_arch()", 0); + ppc_md.progress("lite5200_setup_arch()", 0); np = of_find_node_by_type(NULL, "cpu"); if (np) { @@ -105,7 +105,7 @@ static void __init lite52xx_setup_arch(void) /* CPU & Port mux setup */ mpc52xx_setup_cpu(); /* Generic */ - lite52xx_setup_cpu(); /* Platorm specific */ + lite5200_setup_cpu(); /* Platorm specific */ #ifdef CONFIG_PCI np = of_find_node_by_type(np, "pci"); @@ -126,7 +126,7 @@ static void __init lite52xx_setup_arch(void) } -void lite52xx_show_cpuinfo(struct seq_file *m) +void lite5200_show_cpuinfo(struct seq_file *m) { struct device_node* np = of_find_all_nodes(NULL); const char *model = NULL; @@ -143,25 +143,26 @@ void lite52xx_show_cpuinfo(struct seq_file *m) /* * Called very early, MMU is off, device-tree isn't unflattened */ -static int __init lite52xx_probe(void) +static int __init lite5200_probe(void) { unsigned long node = of_get_flat_dt_root(); const char *model = of_get_flat_dt_prop(node, "model", NULL); - if (!of_flat_dt_is_compatible(node, "lite52xx")) + if (!of_flat_dt_is_compatible(node, "fsl,lite5200") && + !of_flat_dt_is_compatible(node, "fsl,lite5200b")) return 0; - pr_debug("%s board w/ mpc52xx found\n", model ? model : "unknown"); + pr_debug("%s board found\n", model ? model : "unknown"); return 1; } -define_machine(lite52xx) { - .name = "lite52xx", - .probe = lite52xx_probe, - .setup_arch = lite52xx_setup_arch, +define_machine(lite5200) { + .name = "lite5200", + .probe = lite5200_probe, + .setup_arch = lite5200_setup_arch, .init = mpc52xx_declare_of_platform_devices, .init_IRQ = mpc52xx_init_irq, .get_irq = mpc52xx_get_irq, - .show_cpuinfo = lite52xx_show_cpuinfo, + .show_cpuinfo = lite5200_show_cpuinfo, .calibrate_decr = generic_calibrate_decr, }; diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index cc40889074b..ed0cb694aea 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -83,8 +83,8 @@ mpc52xx_setup_cpu(void) struct mpc52xx_xlb __iomem *xlb; /* Map zones */ - cdm = mpc52xx_find_and_map("mpc52xx-cdm"); - xlb = mpc52xx_find_and_map("mpc52xx-xlb"); + cdm = mpc52xx_find_and_map("mpc5200-cdm"); + xlb = mpc52xx_find_and_map("mpc5200-xlb"); if (!cdm || !xlb) { printk(KERN_ERR __FILE__ ": " diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c index cd91a6c3aaf..c75192567e5 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c @@ -383,16 +383,16 @@ void __init mpc52xx_init_irq(void) struct device_node *picnode; /* Remap the necessary zones */ - picnode = of_find_compatible_node(NULL, NULL, "mpc52xx-pic"); + picnode = of_find_compatible_node(NULL, NULL, "mpc5200-pic"); - intr = mpc52xx_find_and_map("mpc52xx-pic"); + intr = mpc52xx_find_and_map("mpc5200-pic"); if (!intr) - panic(__FILE__ ": find_and_map failed on 'mpc52xx-pic'. " + panic(__FILE__ ": find_and_map failed on 'mpc5200-pic'. " "Check node !"); - sdma = mpc52xx_find_and_map("mpc52xx-bestcomm"); + sdma = mpc52xx_find_and_map("mpc5200-bestcomm"); if (!sdma) - panic(__FILE__ ": find_and_map failed on 'mpc52xx-bestcomm'. " + panic(__FILE__ ": find_and_map failed on 'mpc5200-bestcomm'. " "Check node !"); /* Disable all interrupt sources. */ diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index edcd5b875b6..1aea1e69ff3 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -3,7 +3,13 @@ menu "Platform support" choice prompt "Machine Type" - default MPC834x_SYS + default MPC834x_MDS + +config MPC8313_RDB + bool "Freescale MPC8313 RDB" + select DEFAULT_UIMAGE + help + This option enables support for the MPC8313 RDB board. config MPC832x_MDS bool "Freescale MPC832x MDS" @@ -12,13 +18,13 @@ config MPC832x_MDS help This option enables support for the MPC832x MDS evaluation board. -config MPC834x_SYS - bool "Freescale MPC834x SYS" +config MPC834x_MDS + bool "Freescale MPC834x MDS" select DEFAULT_UIMAGE help - This option enables support for the MPC 834x SYS evaluation board. + This option enables support for the MPC 834x MDS evaluation board. - Be aware that PCI buses can only function when SYS board is plugged + Be aware that PCI buses can only function when MDS board is plugged into the PIB (Platform IO Board) board from Freescale which provide 3 PCI slots. The PIBs PCI initialization is the bootloader's responsibility. @@ -41,6 +47,12 @@ config MPC8360E_PB endchoice +config PPC_MPC831x + bool + select PPC_UDBG_16550 + select PPC_INDIRECT_PCI + default y if MPC8313_RDB + config PPC_MPC832x bool select PPC_UDBG_16550 @@ -51,7 +63,7 @@ config MPC834x bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI - default y if MPC834x_SYS || MPC834x_ITX + default y if MPC834x_MDS || MPC834x_ITX config PPC_MPC836x bool diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index f1aa7e24a93..6c8199c4c38 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -3,7 +3,8 @@ # obj-y := misc.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o +obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o +obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o diff --git a/arch/powerpc/platforms/83xx/mpc8313_rdb.c b/arch/powerpc/platforms/83xx/mpc8313_rdb.c new file mode 100644 index 00000000000..c3b98c34eb6 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc8313_rdb.c @@ -0,0 +1,99 @@ +/* + * arch/powerpc/platforms/83xx/mpc8313_rdb.c + * + * Description: MPC8313x RDB board specific routines. + * This file is based on mpc834x_sys.c + * Author: Lo Wlison <r43300@freescale.com> + * + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/pci.h> + +#include <asm/time.h> +#include <asm/ipic.h> +#include <asm/udbg.h> + +#include "mpc83xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc8313_rdb_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc8313_rdb_setup_arch()", 0); + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif +} + +void __init mpc8313_rdb_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc8313_rdb_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + if (model == NULL) + return 0; + if (strcmp(model, "MPC8313ERDB")) + return 0; + + DBG("MPC8313 RDB found\n"); + + return 1; +} + +define_machine(mpc8313_rdb) { + .name = "MPC8313 RDB", + .probe = mpc8313_rdb_probe, + .setup_arch = mpc8313_rdb_setup_arch, + .init_IRQ = mpc8313_rdb_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 2446dea9407..443a3172f37 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -38,8 +38,6 @@ #include "mpc83xx.h" -#include <platforms/83xx/mpc834x_sys.h> - #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index f30393f0b83..d2736da76c4 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -1,7 +1,7 @@ /* - * arch/powerpc/platforms/83xx/mpc834x_sys.c + * arch/powerpc/platforms/83xx/mpc834x_mds.c * - * MPC834x SYS board specific routines + * MPC834x MDS board specific routines * * Maintainer: Kumar Gala <galak@kernel.crashing.org> * @@ -43,17 +43,87 @@ unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif +#define BCSR5_INT_USB 0x02 +/* Note: This is only for PB, not for PB+PIB + * On PB only port0 is connected using ULPI */ +static int mpc834x_usb_cfg(void) +{ + unsigned long sccr, sicrl; + void __iomem *immap; + void __iomem *bcsr_regs = NULL; + u8 bcsr5; + struct device_node *np = NULL; + int port0_is_dr = 0; + + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL) + port0_is_dr = 1; + if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){ + if (port0_is_dr) { + printk(KERN_WARNING + "There is only one USB port on PB board! \n"); + return -1; + } else if (!port0_is_dr) + /* No usb port enabled */ + return -1; + } + + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) + return -1; + + /* Configure clock */ + sccr = in_be32(immap + MPC83XX_SCCR_OFFS); + if (port0_is_dr) + sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ + else + sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ + out_be32(immap + MPC83XX_SCCR_OFFS, sccr); + + /* Configure Pin */ + sicrl = in_be32(immap + MPC83XX_SICRL_OFFS); + /* set port0 only */ + if (port0_is_dr) + sicrl |= MPC83XX_SICRL_USB0; + else + sicrl &= ~(MPC83XX_SICRL_USB0); + out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); + + iounmap(immap); + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != 0) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start + 1); + of_node_put(np); + } + if (!bcsr_regs) + return -1; + + /* + * if MDS board is plug into PIB board, + * force to use the PHY on MDS board + */ + bcsr5 = in_8(bcsr_regs + 5); + if (!(bcsr5 & BCSR5_INT_USB)) + out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB)); + iounmap(bcsr_regs); + return 0; +} + /* ************************************************************************ * * Setup the architecture * */ -static void __init mpc834x_sys_setup_arch(void) +static void __init mpc834x_mds_setup_arch(void) { struct device_node *np; if (ppc_md.progress) - ppc_md.progress("mpc834x_sys_setup_arch()", 0); + ppc_md.progress("mpc834x_mds_setup_arch()", 0); np = of_find_node_by_type(NULL, "cpu"); if (np != 0) { @@ -65,6 +135,7 @@ static void __init mpc834x_sys_setup_arch(void) loops_per_jiffy = 50000000 / HZ; of_node_put(np); } + #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); @@ -72,6 +143,8 @@ static void __init mpc834x_sys_setup_arch(void) ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif + mpc834x_usb_cfg(); + #ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS; #else @@ -79,7 +152,7 @@ static void __init mpc834x_sys_setup_arch(void) #endif } -static void __init mpc834x_sys_init_IRQ(void) +static void __init mpc834x_mds_init_IRQ(void) { struct device_node *np; @@ -119,7 +192,7 @@ late_initcall(mpc834x_rtc_hookup); /* * Called very early, MMU is off, device-tree isn't unflattened */ -static int __init mpc834x_sys_probe(void) +static int __init mpc834x_mds_probe(void) { /* We always match for now, eventually we should look at the flat dev tree to ensure this is the board we are suppose to run on @@ -127,11 +200,11 @@ static int __init mpc834x_sys_probe(void) return 1; } -define_machine(mpc834x_sys) { - .name = "MPC834x SYS", - .probe = mpc834x_sys_probe, - .setup_arch = mpc834x_sys_setup_arch, - .init_IRQ = mpc834x_sys_init_IRQ, +define_machine(mpc834x_mds) { + .name = "MPC834x MDS", + .probe = mpc834x_mds_probe, + .setup_arch = mpc834x_mds_setup_arch, + .init_IRQ = mpc834x_mds_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.h b/arch/powerpc/platforms/83xx/mpc834x_sys.h deleted file mode 100644 index 7d5bbef084e..00000000000 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/powerpc/platforms/83xx/mpc834x_sys.h - * - * MPC834X SYS common board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC83XX_SYS_H__ -#define __MACH_MPC83XX_SYS_H__ - -#define PIRQA MPC83xx_IRQ_EXT4 -#define PIRQB MPC83xx_IRQ_EXT5 -#define PIRQC MPC83xx_IRQ_EXT6 -#define PIRQD MPC83xx_IRQ_EXT7 - -#endif /* __MACH_MPC83XX_SYS_H__ */ diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 01cae106912..9cd03b59c8f 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -4,6 +4,24 @@ #include <linux/init.h> #include <linux/device.h> +/* System Clock Control Register */ +#define MPC83XX_SCCR_OFFS 0xA08 +#define MPC83XX_SCCR_USB_MPHCM_11 0x00c00000 +#define MPC83XX_SCCR_USB_MPHCM_01 0x00400000 +#define MPC83XX_SCCR_USB_MPHCM_10 0x00800000 +#define MPC83XX_SCCR_USB_DRCM_11 0x00300000 +#define MPC83XX_SCCR_USB_DRCM_01 0x00100000 +#define MPC83XX_SCCR_USB_DRCM_10 0x00200000 + +/* system i/o configuration register low */ +#define MPC83XX_SICRL_OFFS 0x114 +#define MPC83XX_SICRL_USB0 0x40000000 +#define MPC83XX_SICRL_USB1 0x20000000 + +/* system i/o configuration register high */ +#define MPC83XX_SICRH_OFFS 0x118 +#define MPC83XX_SICRH_USB_UTMI 0x00020000 + /* * Declaration for the various functions exported by the * mpc83xx_* files. Mostly for use by mpc83xx_setup diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 0584f3c7e88..0efdd2f1bab 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -23,6 +23,13 @@ config MPC85xx_CDS help This option enables support for the MPC85xx CDS board +config MPC8568_MDS + bool "Freescale MPC8568 MDS" + select DEFAULT_UIMAGE +# select QUICC_ENGINE + help + This option enables support for the MPC8568 MDS board + endchoice config MPC8540 @@ -36,6 +43,12 @@ config MPC8560 select PPC_INDIRECT_PCI default y if MPC8560_ADS +config MPC85xx + bool + select PPC_UDBG_16550 + select PPC_INDIRECT_PCI + default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC8568_MDS + config PPC_INDIRECT_PCI_BE bool depends on PPC_85xx diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 282f5d0d015..e40e521816b 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_PPC_85xx) += misc.o pci.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o +obj-$(CONFIG_MPC8568_MDS) += mpc8568_mds.o diff --git a/arch/powerpc/platforms/85xx/mpc8568_mds.c b/arch/powerpc/platforms/85xx/mpc8568_mds.c new file mode 100644 index 00000000000..0861d1107bc --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc8568_mds.c @@ -0,0 +1,246 @@ +/* + * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved. + * + * Author: Andy Fleming <afleming@freescale.com> + * + * Based on 83xx/mpc8360e_pb.c by: + * Li Yang <LeoLi@freescale.com> + * Yin Olivia <Hong-hua.Yin@freescale.com> + * + * Description: + * MPC8568E MDS PB board specific routines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <linux/module.h> +#include <linux/fsl_devices.h> + +#include <asm/of_device.h> +#include <asm/of_platform.h> +#include <asm/system.h> +#include <asm/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/bootinfo.h> +#include <asm/pci-bridge.h> +#include <asm/mpc85xx.h> +#include <asm/irq.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> +#include <asm/qe.h> +#include <asm/qe_ic.h> +#include <asm/mpic.h> + +#include "mpc85xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc8568_mds_setup_arch(void) +{ + struct device_node *np; + static u8 *bcsr_regs = NULL; + + + if (ppc_md.progress) + ppc_md.progress("mpc8568_mds_setup_arch()", 0); + + np = of_find_node_by_type(NULL, "cpu"); + if (np != NULL) { + const unsigned int *fp = + get_property(np, "clock-frequency", NULL); + if (fp != NULL) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(np); + } + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np != NULL) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, res.end - res.start +1); + of_node_put(np); + } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) { + add_bridge(np); + } + of_node_put(np); +#endif + +#ifdef CONFIG_QUICC_ENGINE + if ((np = of_find_node_by_name(NULL, "qe")) != NULL) { + qe_reset(); + of_node_put(np); + } + + if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) { + struct device_node *ucc = NULL; + + par_io_init(np); + of_node_put(np); + + for ( ;(ucc = of_find_node_by_name(ucc, "ucc")) != NULL;) + par_io_of_config(ucc); + + of_node_put(ucc); + } + + if (bcsr_regs) { + u8 bcsr_phy; + + /* Reset the Ethernet PHY */ + bcsr_phy = in_be8(&bcsr_regs[9]); + bcsr_phy &= ~0x20; + out_be8(&bcsr_regs[9], bcsr_phy); + + udelay(1000); + + bcsr_phy = in_be8(&bcsr_regs[9]); + bcsr_phy |= 0x20; + out_be8(&bcsr_regs[9], bcsr_phy); + + iounmap(bcsr_regs); + } + +#endif /* CONFIG_QUICC_ENGINE */ +} + +static struct of_device_id mpc8568_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .type = "qe", }, + {}, +}; + +static int __init mpc8568_publish_devices(void) +{ + if (!machine_is(mpc8568_mds)) + return 0; + + /* Publish the QE devices */ + of_platform_bus_probe(NULL,mpc8568_ids,NULL); + + return 0; +} +device_initcall(mpc8568_publish_devices); + +static void __init mpc8568_mds_pic_init(void) +{ + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + + np = of_find_node_by_type(NULL, "open-pic"); + if (!np) + return; + + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 4, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + of_node_put(np); + + /* Internal Interrupts */ + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10280); + mpic_assign_isu(mpic, 2, r.start + 0x10300); + mpic_assign_isu(mpic, 3, r.start + 0x10380); + mpic_assign_isu(mpic, 4, r.start + 0x10400); + mpic_assign_isu(mpic, 5, r.start + 0x10480); + mpic_assign_isu(mpic, 6, r.start + 0x10500); + mpic_assign_isu(mpic, 7, r.start + 0x10580); + mpic_assign_isu(mpic, 8, r.start + 0x10600); + mpic_assign_isu(mpic, 9, r.start + 0x10680); + mpic_assign_isu(mpic, 10, r.start + 0x10700); + mpic_assign_isu(mpic, 11, r.start + 0x10780); + + /* External Interrupts */ + mpic_assign_isu(mpic, 12, r.start + 0x10000); + mpic_assign_isu(mpic, 13, r.start + 0x10080); + mpic_assign_isu(mpic, 14, r.start + 0x10100); + + mpic_init(mpic); + + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_node_by_type(NULL, "qeic"); + if (!np) + return; + + qe_ic_init(np, 0); + of_node_put(np); +#endif /* CONFIG_QUICC_ENGINE */ +} + + +static int __init mpc8568_mds_probe(void) +{ + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); + if (model == NULL) + return 0; + if (strcmp(model, "MPC8568EMDS")) + return 0; + + DBG("MPC8568EMDS found\n"); + + return 1; +} + + +define_machine(mpc8568_mds) { + .name = "MPC8568E MDS", + .probe = mpc8568_mds_probe, + .setup_arch = mpc8568_mds_setup_arch, + .init_IRQ = mpc8568_mds_pic_init, + .get_irq = mpic_get_irq, + .restart = mpc85xx_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index bda2e55e6c4..c56fce57621 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -45,8 +45,7 @@ unsigned long isa_mem_base = 0; #endif #ifdef CONFIG_PCI -int -mpc85xx_exclude_device(u_char bus, u_char devfn) +static int mpc85xx_exclude_device(u_char bus, u_char devfn) { if (bus == 0 && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; @@ -69,7 +68,7 @@ static void cpm2_cascade(unsigned int irq, struct irq_desc *desc) #endif /* CONFIG_CPM2 */ -void __init mpc85xx_ads_pic_init(void) +static void __init mpc85xx_ads_pic_init(void) { struct mpic *mpic; struct resource r; @@ -254,7 +253,7 @@ static void __init mpc85xx_ads_setup_arch(void) #endif } -void mpc85xx_ads_show_cpuinfo(struct seq_file *m) +static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; uint memsize = total_memory; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 953cd5dd3f5..abc0aca6de4 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -56,7 +56,6 @@ unsigned long isa_mem_base = 0; static int cds_pci_slot = 2; static volatile u8 *cadmus; - #ifdef CONFIG_PCI #define ARCADIA_HOST_BRIDGE_IDSEL 17 @@ -64,8 +63,7 @@ static volatile u8 *cadmus; extern int mpc85xx_pci2_busno; -int -mpc85xx_exclude_device(u_char bus, u_char devfn) +static int mpc85xx_exclude_device(u_char bus, u_char devfn) { if (bus == 0 && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; @@ -81,8 +79,7 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_SUCCESSFUL; } -void __init -mpc85xx_cds_pcibios_fixup(void) +static void __init mpc85xx_cds_pcibios_fixup(void) { struct pci_dev *dev; u_char c; @@ -144,7 +141,7 @@ static void mpc85xx_8259_cascade(unsigned int irq, struct irq_desc *desc) #endif /* PPC_I8259 */ #endif /* CONFIG_PCI */ -void __init mpc85xx_cds_pic_init(void) +static void __init mpc85xx_cds_pic_init(void) { struct mpic *mpic; struct resource r; @@ -224,12 +221,10 @@ void __init mpc85xx_cds_pic_init(void) #endif /* CONFIG_PPC_I8259 */ } - /* * Setup the architecture */ -static void __init -mpc85xx_cds_setup_arch(void) +static void __init mpc85xx_cds_setup_arch(void) { struct device_node *cpu; #ifdef CONFIG_PCI @@ -276,9 +271,7 @@ mpc85xx_cds_setup_arch(void) #endif } - -void -mpc85xx_cds_show_cpuinfo(struct seq_file *m) +static void mpc85xx_cds_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; uint memsize = total_memory; diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 65e612315b9..452004283f1 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -5,9 +5,9 @@ ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_PPC_PMAC) += powermac/ endif endif -obj-$(CONFIG_PPC_MPC52xx) += 52xx/ obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_4xx) += 4xx/ +obj-$(CONFIG_PPC_MPC52xx) += 52xx/ obj-$(CONFIG_PPC_8xx) += 8xx/ obj-$(CONFIG_PPC_82xx) += 82xx/ obj-$(CONFIG_PPC_83xx) += 83xx/ diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c index d04ae1671e6..66ca4b5a1db 100644 --- a/arch/powerpc/platforms/cell/pmu.c +++ b/arch/powerpc/platforms/cell/pmu.c @@ -345,18 +345,12 @@ EXPORT_SYMBOL_GPL(cbe_read_trace_buffer); * Enabling/disabling interrupts for the entire performance monitoring unit. */ -u32 cbe_query_pm_interrupts(u32 cpu) -{ - return cbe_read_pm(cpu, pm_status); -} -EXPORT_SYMBOL_GPL(cbe_query_pm_interrupts); - -u32 cbe_clear_pm_interrupts(u32 cpu) +u32 cbe_get_and_clear_pm_interrupts(u32 cpu) { /* Reading pm_status clears the interrupt bits. */ - return cbe_query_pm_interrupts(cpu); + return cbe_read_pm(cpu, pm_status); } -EXPORT_SYMBOL_GPL(cbe_clear_pm_interrupts); +EXPORT_SYMBOL_GPL(cbe_get_and_clear_pm_interrupts); void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask) { @@ -371,7 +365,7 @@ EXPORT_SYMBOL_GPL(cbe_enable_pm_interrupts); void cbe_disable_pm_interrupts(u32 cpu) { - cbe_clear_pm_interrupts(cpu); + cbe_get_and_clear_pm_interrupts(cpu); cbe_write_pm(cpu, pm_status, 0); } EXPORT_SYMBOL_GPL(cbe_disable_pm_interrupts); diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c index d8b39fe39cd..e34599f53d2 100644 --- a/arch/powerpc/platforms/cell/spu_manage.c +++ b/arch/powerpc/platforms/cell/spu_manage.c @@ -59,63 +59,6 @@ static u64 __init find_spu_unit_number(struct device_node *spe) return 0; } -static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe, - const char *prop) -{ - const struct address_prop { - unsigned long address; - unsigned int len; - } __attribute__((packed)) *p; - int proplen; - - unsigned long start_pfn, nr_pages; - struct pglist_data *pgdata; - struct zone *zone; - int ret; - - p = get_property(spe, prop, &proplen); - WARN_ON(proplen != sizeof (*p)); - - start_pfn = p->address >> PAGE_SHIFT; - nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT; - - pgdata = NODE_DATA(spu->node); - zone = pgdata->node_zones; - - ret = __add_pages(zone, start_pfn, nr_pages); - - return ret; -} - -static void __iomem * __init map_spe_prop(struct spu *spu, - struct device_node *n, const char *name) -{ - const struct address_prop { - unsigned long address; - unsigned int len; - } __attribute__((packed)) *prop; - - const void *p; - int proplen; - void __iomem *ret = NULL; - int err = 0; - - p = get_property(n, name, &proplen); - if (proplen != sizeof (struct address_prop)) - return NULL; - - prop = p; - - err = cell_spuprop_present(spu, n, name); - if (err && (err != -EEXIST)) - goto out; - - ret = ioremap(prop->address, prop->len); - - out: - return ret; -} - static void spu_unmap(struct spu *spu) { if (!firmware_has_feature(FW_FEATURE_LPAR)) @@ -157,6 +100,23 @@ static int __init spu_map_interrupts_old(struct spu *spu, return spu->irqs[2] == NO_IRQ ? -EINVAL : 0; } +static void __iomem * __init spu_map_prop_old(struct spu *spu, + struct device_node *n, + const char *name) +{ + const struct address_prop { + unsigned long address; + unsigned int len; + } __attribute__((packed)) *prop; + int proplen; + + prop = get_property(n, name, &proplen); + if (prop == NULL || proplen != sizeof (struct address_prop)) + return NULL; + + return ioremap(prop->address, prop->len); +} + static int __init spu_map_device_old(struct spu *spu) { struct device_node *node = spu->devnode; @@ -175,7 +135,7 @@ static int __init spu_map_device_old(struct spu *spu) /* we use local store as ram, not io memory */ spu->local_store = (void __force *) - map_spe_prop(spu, node, "local-store"); + spu_map_prop_old(spu, node, "local-store"); if (!spu->local_store) goto out; @@ -184,16 +144,16 @@ static int __init spu_map_device_old(struct spu *spu) goto out_unmap; spu->problem_phys = *(unsigned long *)prop; - spu->problem = map_spe_prop(spu, node, "problem"); + spu->problem = spu_map_prop_old(spu, node, "problem"); if (!spu->problem) goto out_unmap; - spu->priv2 = map_spe_prop(spu, node, "priv2"); + spu->priv2 = spu_map_prop_old(spu, node, "priv2"); if (!spu->priv2) goto out_unmap; if (!firmware_has_feature(FW_FEATURE_LPAR)) { - spu->priv1 = map_spe_prop(spu, node, "priv1"); + spu->priv1 = spu_map_prop_old(spu, node, "priv1"); if (!spu->priv1) goto out_unmap; } @@ -245,34 +205,20 @@ static int spu_map_resource(struct spu *spu, int nr, void __iomem** virt, unsigned long *phys) { struct device_node *np = spu->devnode; - unsigned long start_pfn, nr_pages; - struct pglist_data *pgdata; - struct zone *zone; struct resource resource = { }; unsigned long len; int ret; ret = of_address_to_resource(np, nr, &resource); if (ret) - goto out; - + return ret; if (phys) *phys = resource.start; len = resource.end - resource.start + 1; *virt = ioremap(resource.start, len); if (!*virt) - ret = -EINVAL; - - start_pfn = resource.start >> PAGE_SHIFT; - nr_pages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT; - - pgdata = NODE_DATA(spu->node); - zone = pgdata->node_zones; - - ret = __add_pages(zone, start_pfn, nr_pages); - -out: - return ret; + return -EINVAL; + return 0; } static int __init spu_map_device(struct spu *spu) diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 0870009f56d..04ad2e364e9 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -42,7 +42,7 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang) } spin_lock_init(&ctx->mmio_lock); kref_init(&ctx->kref); - init_rwsem(&ctx->state_sema); + mutex_init(&ctx->state_mutex); init_MUTEX(&ctx->run_sema); init_waitqueue_head(&ctx->ibox_wq); init_waitqueue_head(&ctx->wbox_wq); @@ -53,6 +53,10 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang) ctx->owner = get_task_mm(current); if (gang) spu_gang_add_ctx(gang, ctx); + ctx->rt_priority = current->rt_priority; + ctx->policy = current->policy; + ctx->prio = current->prio; + INIT_DELAYED_WORK(&ctx->sched_work, spu_sched_tick); goto out; out_free: kfree(ctx); @@ -65,9 +69,9 @@ void destroy_spu_context(struct kref *kref) { struct spu_context *ctx; ctx = container_of(kref, struct spu_context, kref); - down_write(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); spu_deactivate(ctx); - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); spu_fini_csa(&ctx->csa); if (ctx->gang) spu_gang_remove_ctx(ctx->gang, ctx); @@ -96,107 +100,102 @@ void spu_forget(struct spu_context *ctx) spu_release(ctx); } -void spu_acquire(struct spu_context *ctx) -{ - down_read(&ctx->state_sema); -} - -void spu_release(struct spu_context *ctx) -{ - up_read(&ctx->state_sema); -} - void spu_unmap_mappings(struct spu_context *ctx) { if (ctx->local_store) unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1); if (ctx->mfc) - unmap_mapping_range(ctx->mfc, 0, 0x4000, 1); + unmap_mapping_range(ctx->mfc, 0, 0x1000, 1); if (ctx->cntl) - unmap_mapping_range(ctx->cntl, 0, 0x4000, 1); + unmap_mapping_range(ctx->cntl, 0, 0x1000, 1); if (ctx->signal1) - unmap_mapping_range(ctx->signal1, 0, 0x4000, 1); + unmap_mapping_range(ctx->signal1, 0, PAGE_SIZE, 1); if (ctx->signal2) - unmap_mapping_range(ctx->signal2, 0, 0x4000, 1); + unmap_mapping_range(ctx->signal2, 0, PAGE_SIZE, 1); + if (ctx->mss) + unmap_mapping_range(ctx->mss, 0, 0x1000, 1); + if (ctx->psmap) + unmap_mapping_range(ctx->psmap, 0, 0x20000, 1); } +/** + * spu_acquire_exclusive - lock spu contex and protect against userspace access + * @ctx: spu contex to lock + * + * Note: + * Returns 0 and with the context locked on success + * Returns negative error and with the context _unlocked_ on failure. + */ int spu_acquire_exclusive(struct spu_context *ctx) { - int ret = 0; + int ret = -EINVAL; - down_write(&ctx->state_sema); - /* ctx is about to be freed, can't acquire any more */ - if (!ctx->owner) { - ret = -EINVAL; - goto out; - } + spu_acquire(ctx); + /* + * Context is about to be freed, so we can't acquire it anymore. + */ + if (!ctx->owner) + goto out_unlock; if (ctx->state == SPU_STATE_SAVED) { ret = spu_activate(ctx, 0); if (ret) - goto out; - ctx->state = SPU_STATE_RUNNABLE; + goto out_unlock; } else { - /* We need to exclude userspace access to the context. */ + /* + * We need to exclude userspace access to the context. + * + * To protect against memory access we invalidate all ptes + * and make sure the pagefault handlers block on the mutex. + */ spu_unmap_mappings(ctx); } -out: - if (ret) - up_write(&ctx->state_sema); + return 0; + + out_unlock: + spu_release(ctx); return ret; } -int spu_acquire_runnable(struct spu_context *ctx) +/** + * spu_acquire_runnable - lock spu contex and make sure it is in runnable state + * @ctx: spu contex to lock + * + * Note: + * Returns 0 and with the context locked on success + * Returns negative error and with the context _unlocked_ on failure. + */ +int spu_acquire_runnable(struct spu_context *ctx, unsigned long flags) { - int ret = 0; - - down_read(&ctx->state_sema); - if (ctx->state == SPU_STATE_RUNNABLE) { - ctx->spu->prio = current->prio; - return 0; - } - up_read(&ctx->state_sema); - - down_write(&ctx->state_sema); - /* ctx is about to be freed, can't acquire any more */ - if (!ctx->owner) { - ret = -EINVAL; - goto out; - } + int ret = -EINVAL; + spu_acquire(ctx); if (ctx->state == SPU_STATE_SAVED) { - ret = spu_activate(ctx, 0); + /* + * Context is about to be freed, so we can't acquire it anymore. + */ + if (!ctx->owner) + goto out_unlock; + ret = spu_activate(ctx, flags); if (ret) - goto out; - ctx->state = SPU_STATE_RUNNABLE; + goto out_unlock; } - downgrade_write(&ctx->state_sema); - /* On success, we return holding the lock */ - - return ret; -out: - /* Release here, to simplify calling code. */ - up_write(&ctx->state_sema); + return 0; + out_unlock: + spu_release(ctx); return ret; } +/** + * spu_acquire_saved - lock spu contex and make sure it is in saved state + * @ctx: spu contex to lock + */ void spu_acquire_saved(struct spu_context *ctx) { - down_read(&ctx->state_sema); - - if (ctx->state == SPU_STATE_SAVED) - return; - - up_read(&ctx->state_sema); - down_write(&ctx->state_sema); - - if (ctx->state == SPU_STATE_RUNNABLE) { + spu_acquire(ctx); + if (ctx->state != SPU_STATE_SAVED) spu_deactivate(ctx); - ctx->state = SPU_STATE_SAVED; - } - - downgrade_write(&ctx->state_sema); } diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index af9e9455a70..b00653d69c0 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -45,8 +45,8 @@ spufs_mem_open(struct inode *inode, struct file *file) struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; file->private_data = ctx; - file->f_mapping = inode->i_mapping; ctx->local_store = inode->i_mapping; + smp_wmb(); return 0; } @@ -95,39 +95,38 @@ spufs_mem_write(struct file *file, const char __user *buffer, return ret; } -static struct page * -spufs_mem_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - struct page *page = NOPAGE_SIGBUS; - struct spu_context *ctx = vma->vm_file->private_data; - unsigned long offset = address - vma->vm_start; + unsigned long pfn, offset = address - vma->vm_start; + offset += vma->vm_pgoff << PAGE_SHIFT; + if (offset >= LS_SIZE) + return NOPFN_SIGBUS; + spu_acquire(ctx); if (ctx->state == SPU_STATE_SAVED) { vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) & ~_PAGE_NO_CACHE); - page = vmalloc_to_page(ctx->csa.lscsa->ls + offset); + pfn = vmalloc_to_pfn(ctx->csa.lscsa->ls + offset); } else { vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) - | _PAGE_NO_CACHE); - page = pfn_to_page((ctx->spu->local_store_phys + offset) - >> PAGE_SHIFT); + | _PAGE_NO_CACHE); + pfn = (ctx->spu->local_store_phys + offset) >> PAGE_SHIFT; } - spu_release(ctx); + vm_insert_pfn(vma, address, pfn); - if (type) - *type = VM_FAULT_MINOR; + spu_release(ctx); - page_cache_get(page); - return page; + return NOPFN_REFAULT; } + static struct vm_operations_struct spufs_mem_mmap_vmops = { - .nopage = spufs_mem_mmap_nopage, + .nopfn = spufs_mem_mmap_nopfn, }; static int @@ -136,7 +135,7 @@ spufs_mem_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE); @@ -152,49 +151,42 @@ static const struct file_operations spufs_mem_fops = { .mmap = spufs_mem_mmap, }; -static struct page *spufs_ps_nopage(struct vm_area_struct *vma, +static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, unsigned long address, - int *type, unsigned long ps_offs, + unsigned long ps_offs, unsigned long ps_size) { - struct page *page = NOPAGE_SIGBUS; - int fault_type = VM_FAULT_SIGBUS; struct spu_context *ctx = vma->vm_file->private_data; - unsigned long offset = address - vma->vm_start; - unsigned long area; + unsigned long area, offset = address - vma->vm_start; int ret; offset += vma->vm_pgoff << PAGE_SHIFT; if (offset >= ps_size) - goto out; + return NOPFN_SIGBUS; - ret = spu_acquire_runnable(ctx); + /* error here usually means a signal.. we might want to test + * the error code more precisely though + */ + ret = spu_acquire_runnable(ctx, 0); if (ret) - goto out; + return NOPFN_REFAULT; area = ctx->spu->problem_phys + ps_offs; - page = pfn_to_page((area + offset) >> PAGE_SHIFT); - fault_type = VM_FAULT_MINOR; - page_cache_get(page); - + vm_insert_pfn(vma, address, (area + offset) >> PAGE_SHIFT); spu_release(ctx); - out: - if (type) - *type = fault_type; - - return page; + return NOPFN_REFAULT; } #if SPUFS_MMAP_4K -static struct page *spufs_cntl_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_cntl_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - return spufs_ps_nopage(vma, address, type, 0x4000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x4000, 0x1000); } static struct vm_operations_struct spufs_cntl_mmap_vmops = { - .nopage = spufs_cntl_mmap_nopage, + .nopfn = spufs_cntl_mmap_nopfn, }; /* @@ -205,7 +197,7 @@ static int spufs_cntl_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -243,8 +235,8 @@ static int spufs_cntl_open(struct inode *inode, struct file *file) struct spu_context *ctx = i->i_ctx; file->private_data = ctx; - file->f_mapping = inode->i_mapping; ctx->cntl = inode->i_mapping; + smp_wmb(); return simple_attr_open(inode, file, spufs_cntl_get, spufs_cntl_set, "0x%08lx"); } @@ -728,8 +720,8 @@ static int spufs_signal1_open(struct inode *inode, struct file *file) struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; file->private_data = ctx; - file->f_mapping = inode->i_mapping; ctx->signal1 = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -791,23 +783,23 @@ static ssize_t spufs_signal1_write(struct file *file, const char __user *buf, return 4; } -static struct page *spufs_signal1_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_signal1_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { #if PAGE_SIZE == 0x1000 - return spufs_ps_nopage(vma, address, type, 0x14000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x14000, 0x1000); #elif PAGE_SIZE == 0x10000 /* For 64k pages, both signal1 and signal2 can be used to mmap the whole * signal 1 and 2 area */ - return spufs_ps_nopage(vma, address, type, 0x10000, 0x10000); + return spufs_ps_nopfn(vma, address, 0x10000, 0x10000); #else #error unsupported page size #endif } static struct vm_operations_struct spufs_signal1_mmap_vmops = { - .nopage = spufs_signal1_mmap_nopage, + .nopfn = spufs_signal1_mmap_nopfn, }; static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma) @@ -815,7 +807,7 @@ static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -835,8 +827,8 @@ static int spufs_signal2_open(struct inode *inode, struct file *file) struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; file->private_data = ctx; - file->f_mapping = inode->i_mapping; ctx->signal2 = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -899,23 +891,23 @@ static ssize_t spufs_signal2_write(struct file *file, const char __user *buf, } #if SPUFS_MMAP_4K -static struct page *spufs_signal2_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_signal2_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { #if PAGE_SIZE == 0x1000 - return spufs_ps_nopage(vma, address, type, 0x1c000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x1c000, 0x1000); #elif PAGE_SIZE == 0x10000 /* For 64k pages, both signal1 and signal2 can be used to mmap the whole * signal 1 and 2 area */ - return spufs_ps_nopage(vma, address, type, 0x10000, 0x10000); + return spufs_ps_nopfn(vma, address, 0x10000, 0x10000); #else #error unsupported page size #endif } static struct vm_operations_struct spufs_signal2_mmap_vmops = { - .nopage = spufs_signal2_mmap_nopage, + .nopfn = spufs_signal2_mmap_nopfn, }; static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma) @@ -923,7 +915,7 @@ static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -1000,14 +992,14 @@ DEFINE_SIMPLE_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get, spufs_signal2_type_set, "%llu"); #if SPUFS_MMAP_4K -static struct page *spufs_mss_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_mss_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - return spufs_ps_nopage(vma, address, type, 0x0000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x0000, 0x1000); } static struct vm_operations_struct spufs_mss_mmap_vmops = { - .nopage = spufs_mss_mmap_nopage, + .nopfn = spufs_mss_mmap_nopfn, }; /* @@ -1018,7 +1010,7 @@ static int spufs_mss_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -1032,8 +1024,11 @@ static int spufs_mss_mmap(struct file *file, struct vm_area_struct *vma) static int spufs_mss_open(struct inode *inode, struct file *file) { struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; file->private_data = i->i_ctx; + ctx->mss = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -1042,14 +1037,14 @@ static const struct file_operations spufs_mss_fops = { .mmap = spufs_mss_mmap, }; -static struct page *spufs_psmap_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_psmap_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - return spufs_ps_nopage(vma, address, type, 0x0000, 0x20000); + return spufs_ps_nopfn(vma, address, 0x0000, 0x20000); } static struct vm_operations_struct spufs_psmap_mmap_vmops = { - .nopage = spufs_psmap_mmap_nopage, + .nopfn = spufs_psmap_mmap_nopfn, }; /* @@ -1060,7 +1055,7 @@ static int spufs_psmap_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -1071,8 +1066,11 @@ static int spufs_psmap_mmap(struct file *file, struct vm_area_struct *vma) static int spufs_psmap_open(struct inode *inode, struct file *file) { struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; file->private_data = i->i_ctx; + ctx->psmap = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -1083,14 +1081,14 @@ static const struct file_operations spufs_psmap_fops = { #if SPUFS_MMAP_4K -static struct page *spufs_mfc_mmap_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static unsigned long spufs_mfc_mmap_nopfn(struct vm_area_struct *vma, + unsigned long address) { - return spufs_ps_nopage(vma, address, type, 0x3000, 0x1000); + return spufs_ps_nopfn(vma, address, 0x3000, 0x1000); } static struct vm_operations_struct spufs_mfc_mmap_vmops = { - .nopage = spufs_mfc_mmap_nopage, + .nopfn = spufs_mfc_mmap_nopfn, }; /* @@ -1101,7 +1099,7 @@ static int spufs_mfc_mmap(struct file *file, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_SHARED)) return -EINVAL; - vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_IO | VM_PFNMAP; vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) | _PAGE_NO_CACHE | _PAGE_GUARDED); @@ -1125,6 +1123,8 @@ static int spufs_mfc_open(struct inode *inode, struct file *file) return -EBUSY; file->private_data = ctx; + ctx->mfc = inode->i_mapping; + smp_wmb(); return nonseekable_open(inode, file); } @@ -1309,7 +1309,7 @@ static ssize_t spufs_mfc_write(struct file *file, const char __user *buffer, if (ret) goto out; - spu_acquire_runnable(ctx); + spu_acquire_runnable(ctx, 0); if (file->f_flags & O_NONBLOCK) { ret = ctx->ops->send_mfc_command(ctx, &cmd); } else { diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 1acc2ffef8c..353a8fa07ab 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -133,7 +133,7 @@ out_drop_priv: spu_mfc_sr1_set(ctx->spu, sr1); out_unlock: - spu_release_exclusive(ctx); + spu_release(ctx); out: return ret; } @@ -143,7 +143,7 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc) int ret; unsigned long runcntl = SPU_RUNCNTL_RUNNABLE; - ret = spu_acquire_runnable(ctx); + ret = spu_acquire_runnable(ctx, SPU_ACTIVATE_NOWAKE); if (ret) return ret; @@ -155,7 +155,7 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc) spu_release(ctx); ret = spu_setup_isolated(ctx); if (!ret) - ret = spu_acquire_runnable(ctx); + ret = spu_acquire_runnable(ctx, SPU_ACTIVATE_NOWAKE); } /* if userspace has set the runcntrl register (eg, to issue an @@ -164,8 +164,10 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc) (SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE); if (runcntl == 0) runcntl = SPU_RUNCNTL_RUNNABLE; - } else + } else { + spu_start_tick(ctx); ctx->ops->npc_write(ctx, *npc); + } ctx->ops->runcntl_write(ctx, runcntl); return ret; @@ -176,6 +178,7 @@ static inline int spu_run_fini(struct spu_context *ctx, u32 * npc, { int ret = 0; + spu_stop_tick(ctx); *status = ctx->ops->status_read(ctx); *npc = ctx->ops->npc_read(ctx); spu_release(ctx); @@ -329,8 +332,10 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx, } if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) { ret = spu_reacquire_runnable(ctx, npc, &status); - if (ret) + if (ret) { + spu_stop_tick(ctx); goto out2; + } continue; } ret = spu_process_events(ctx); @@ -361,4 +366,3 @@ out: up(&ctx->run_sema); return ret; } - diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index bd6fe4b7a84..2f25e68b4ba 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -44,17 +44,18 @@ #include <asm/spu_priv1.h> #include "spufs.h" -#define SPU_MIN_TIMESLICE (100 * HZ / 1000) +#define SPU_TIMESLICE (HZ) -#define SPU_BITMAP_SIZE (((MAX_PRIO+BITS_PER_LONG)/BITS_PER_LONG)+1) struct spu_prio_array { - unsigned long bitmap[SPU_BITMAP_SIZE]; - wait_queue_head_t waitq[MAX_PRIO]; + DECLARE_BITMAP(bitmap, MAX_PRIO); + struct list_head runq[MAX_PRIO]; + spinlock_t runq_lock; struct list_head active_list[MAX_NUMNODES]; struct mutex active_mutex[MAX_NUMNODES]; }; static struct spu_prio_array *spu_prio; +static struct workqueue_struct *spu_sched_wq; static inline int node_allowed(int node) { @@ -68,6 +69,64 @@ static inline int node_allowed(int node) return 1; } +void spu_start_tick(struct spu_context *ctx) +{ + if (ctx->policy == SCHED_RR) + queue_delayed_work(spu_sched_wq, &ctx->sched_work, SPU_TIMESLICE); +} + +void spu_stop_tick(struct spu_context *ctx) +{ + if (ctx->policy == SCHED_RR) + cancel_delayed_work(&ctx->sched_work); +} + +void spu_sched_tick(struct work_struct *work) +{ + struct spu_context *ctx = + container_of(work, struct spu_context, sched_work.work); + struct spu *spu; + int rearm = 1; + + mutex_lock(&ctx->state_mutex); + spu = ctx->spu; + if (spu) { + int best = sched_find_first_bit(spu_prio->bitmap); + if (best <= ctx->prio) { + spu_deactivate(ctx); + rearm = 0; + } + } + mutex_unlock(&ctx->state_mutex); + + if (rearm) + spu_start_tick(ctx); +} + +/** + * spu_add_to_active_list - add spu to active list + * @spu: spu to add to the active list + */ +static void spu_add_to_active_list(struct spu *spu) +{ + mutex_lock(&spu_prio->active_mutex[spu->node]); + list_add_tail(&spu->list, &spu_prio->active_list[spu->node]); + mutex_unlock(&spu_prio->active_mutex[spu->node]); +} + +/** + * spu_remove_from_active_list - remove spu from active list + * @spu: spu to remove from the active list + */ +static void spu_remove_from_active_list(struct spu *spu) +{ + int node = spu->node; + + mutex_lock(&spu_prio->active_mutex[node]); + list_del_init(&spu->list); + mutex_unlock(&spu_prio->active_mutex[node]); +} + static inline void mm_needs_global_tlbie(struct mm_struct *mm) { int nr = (NR_CPUS > 1) ? NR_CPUS : NR_CPUS + 1; @@ -94,8 +153,12 @@ int spu_switch_event_unregister(struct notifier_block * n) return blocking_notifier_chain_unregister(&spu_switch_notifier, n); } - -static inline void bind_context(struct spu *spu, struct spu_context *ctx) +/** + * spu_bind_context - bind spu context to physical spu + * @spu: physical spu to bind to + * @ctx: context to bind + */ +static void spu_bind_context(struct spu *spu, struct spu_context *ctx) { pr_debug("%s: pid=%d SPU=%d NODE=%d\n", __FUNCTION__, current->pid, spu->number, spu->node); @@ -104,7 +167,6 @@ static inline void bind_context(struct spu *spu, struct spu_context *ctx) ctx->spu = spu; ctx->ops = &spu_hw_ops; spu->pid = current->pid; - spu->prio = current->prio; spu->mm = ctx->owner; mm_needs_global_tlbie(spu->mm); spu->ibox_callback = spufs_ibox_callback; @@ -118,12 +180,21 @@ static inline void bind_context(struct spu *spu, struct spu_context *ctx) spu->timestamp = jiffies; spu_cpu_affinity_set(spu, raw_smp_processor_id()); spu_switch_notify(spu, ctx); + spu_add_to_active_list(spu); + ctx->state = SPU_STATE_RUNNABLE; } -static inline void unbind_context(struct spu *spu, struct spu_context *ctx) +/** + * spu_unbind_context - unbind spu context from physical spu + * @spu: physical spu to unbind from + * @ctx: context to unbind + */ +static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) { pr_debug("%s: unbind pid=%d SPU=%d NODE=%d\n", __FUNCTION__, spu->pid, spu->number, spu->node); + + spu_remove_from_active_list(spu); spu_switch_notify(spu, NULL); spu_unmap_mappings(ctx); spu_save(&ctx->csa, spu); @@ -136,95 +207,98 @@ static inline void unbind_context(struct spu *spu, struct spu_context *ctx) spu->dma_callback = NULL; spu->mm = NULL; spu->pid = 0; - spu->prio = MAX_PRIO; ctx->ops = &spu_backing_ops; ctx->spu = NULL; spu->flags = 0; spu->ctx = NULL; } -static inline void spu_add_wq(wait_queue_head_t * wq, wait_queue_t * wait, - int prio) +/** + * spu_add_to_rq - add a context to the runqueue + * @ctx: context to add + */ +static void spu_add_to_rq(struct spu_context *ctx) { - prepare_to_wait_exclusive(wq, wait, TASK_INTERRUPTIBLE); - set_bit(prio, spu_prio->bitmap); + spin_lock(&spu_prio->runq_lock); + list_add_tail(&ctx->rq, &spu_prio->runq[ctx->prio]); + set_bit(ctx->prio, spu_prio->bitmap); + spin_unlock(&spu_prio->runq_lock); } -static inline void spu_del_wq(wait_queue_head_t * wq, wait_queue_t * wait, - int prio) +/** + * spu_del_from_rq - remove a context from the runqueue + * @ctx: context to remove + */ +static void spu_del_from_rq(struct spu_context *ctx) { - u64 flags; - - __set_current_state(TASK_RUNNING); - - spin_lock_irqsave(&wq->lock, flags); + spin_lock(&spu_prio->runq_lock); + list_del_init(&ctx->rq); + if (list_empty(&spu_prio->runq[ctx->prio])) + clear_bit(ctx->prio, spu_prio->bitmap); + spin_unlock(&spu_prio->runq_lock); +} - remove_wait_queue_locked(wq, wait); - if (list_empty(&wq->task_list)) - clear_bit(prio, spu_prio->bitmap); +/** + * spu_grab_context - remove one context from the runqueue + * @prio: priority of the context to be removed + * + * This function removes one context from the runqueue for priority @prio. + * If there is more than one context with the given priority the first + * task on the runqueue will be taken. + * + * Returns the spu_context it just removed. + * + * Must be called with spu_prio->runq_lock held. + */ +static struct spu_context *spu_grab_context(int prio) +{ + struct list_head *rq = &spu_prio->runq[prio]; - spin_unlock_irqrestore(&wq->lock, flags); + if (list_empty(rq)) + return NULL; + return list_entry(rq->next, struct spu_context, rq); } -static void spu_prio_wait(struct spu_context *ctx, u64 flags) +static void spu_prio_wait(struct spu_context *ctx) { - int prio = current->prio; - wait_queue_head_t *wq = &spu_prio->waitq[prio]; DEFINE_WAIT(wait); - if (ctx->spu) - return; - - spu_add_wq(wq, &wait, prio); - + set_bit(SPU_SCHED_WAKE, &ctx->sched_flags); + prepare_to_wait_exclusive(&ctx->stop_wq, &wait, TASK_INTERRUPTIBLE); if (!signal_pending(current)) { - up_write(&ctx->state_sema); - pr_debug("%s: pid=%d prio=%d\n", __FUNCTION__, - current->pid, current->prio); + mutex_unlock(&ctx->state_mutex); schedule(); - down_write(&ctx->state_sema); + mutex_lock(&ctx->state_mutex); } - - spu_del_wq(wq, &wait, prio); + __set_current_state(TASK_RUNNING); + remove_wait_queue(&ctx->stop_wq, &wait); + clear_bit(SPU_SCHED_WAKE, &ctx->sched_flags); } -static void spu_prio_wakeup(void) +/** + * spu_reschedule - try to find a runnable context for a spu + * @spu: spu available + * + * This function is called whenever a spu becomes idle. It looks for the + * most suitable runnable spu context and schedules it for execution. + */ +static void spu_reschedule(struct spu *spu) { - int best = sched_find_first_bit(spu_prio->bitmap); - if (best < MAX_PRIO) { - wait_queue_head_t *wq = &spu_prio->waitq[best]; - wake_up_interruptible_nr(wq, 1); - } -} + int best; -static int get_active_spu(struct spu *spu) -{ - int node = spu->node; - struct spu *tmp; - int rc = 0; + spu_free(spu); - mutex_lock(&spu_prio->active_mutex[node]); - list_for_each_entry(tmp, &spu_prio->active_list[node], list) { - if (tmp == spu) { - list_del_init(&spu->list); - rc = 1; - break; - } + spin_lock(&spu_prio->runq_lock); + best = sched_find_first_bit(spu_prio->bitmap); + if (best < MAX_PRIO) { + struct spu_context *ctx = spu_grab_context(best); + if (ctx && test_bit(SPU_SCHED_WAKE, &ctx->sched_flags)) + wake_up(&ctx->stop_wq); } - mutex_unlock(&spu_prio->active_mutex[node]); - return rc; -} - -static void put_active_spu(struct spu *spu) -{ - int node = spu->node; - - mutex_lock(&spu_prio->active_mutex[node]); - list_add_tail(&spu->list, &spu_prio->active_list[node]); - mutex_unlock(&spu_prio->active_mutex[node]); + spin_unlock(&spu_prio->runq_lock); } -static struct spu *spu_get_idle(struct spu_context *ctx, u64 flags) +static struct spu *spu_get_idle(struct spu_context *ctx) { struct spu *spu = NULL; int node = cpu_to_node(raw_smp_processor_id()); @@ -241,87 +315,154 @@ static struct spu *spu_get_idle(struct spu_context *ctx, u64 flags) return spu; } -static inline struct spu *spu_get(struct spu_context *ctx, u64 flags) +/** + * find_victim - find a lower priority context to preempt + * @ctx: canidate context for running + * + * Returns the freed physical spu to run the new context on. + */ +static struct spu *find_victim(struct spu_context *ctx) { - /* Future: spu_get_idle() if possible, - * otherwise try to preempt an active - * context. + struct spu_context *victim = NULL; + struct spu *spu; + int node, n; + + /* + * Look for a possible preemption candidate on the local node first. + * If there is no candidate look at the other nodes. This isn't + * exactly fair, but so far the whole spu schedule tries to keep + * a strong node affinity. We might want to fine-tune this in + * the future. */ - return spu_get_idle(ctx, flags); + restart: + node = cpu_to_node(raw_smp_processor_id()); + for (n = 0; n < MAX_NUMNODES; n++, node++) { + node = (node < MAX_NUMNODES) ? node : 0; + if (!node_allowed(node)) + continue; + + mutex_lock(&spu_prio->active_mutex[node]); + list_for_each_entry(spu, &spu_prio->active_list[node], list) { + struct spu_context *tmp = spu->ctx; + + if (tmp->rt_priority < ctx->rt_priority && + (!victim || tmp->rt_priority < victim->rt_priority)) + victim = spu->ctx; + } + mutex_unlock(&spu_prio->active_mutex[node]); + + if (victim) { + /* + * This nests ctx->state_mutex, but we always lock + * higher priority contexts before lower priority + * ones, so this is safe until we introduce + * priority inheritance schemes. + */ + if (!mutex_trylock(&victim->state_mutex)) { + victim = NULL; + goto restart; + } + + spu = victim->spu; + if (!spu) { + /* + * This race can happen because we've dropped + * the active list mutex. No a problem, just + * restart the search. + */ + mutex_unlock(&victim->state_mutex); + victim = NULL; + goto restart; + } + spu_unbind_context(spu, victim); + mutex_unlock(&victim->state_mutex); + return spu; + } + } + + return NULL; } -/* The three externally callable interfaces - * for the scheduler begin here. +/** + * spu_activate - find a free spu for a context and execute it + * @ctx: spu context to schedule + * @flags: flags (currently ignored) * - * spu_activate - bind a context to SPU, waiting as needed. - * spu_deactivate - unbind a context from its SPU. - * spu_yield - yield an SPU if others are waiting. + * Tries to find a free spu to run @ctx. If no free spu is availble + * add the context to the runqueue so it gets woken up once an spu + * is available. */ - -int spu_activate(struct spu_context *ctx, u64 flags) +int spu_activate(struct spu_context *ctx, unsigned long flags) { - struct spu *spu; - int ret = 0; - for (;;) { - if (ctx->spu) + if (ctx->spu) + return 0; + + do { + struct spu *spu; + + spu = spu_get_idle(ctx); + /* + * If this is a realtime thread we try to get it running by + * preempting a lower priority thread. + */ + if (!spu && ctx->rt_priority) + spu = find_victim(ctx); + if (spu) { + spu_bind_context(spu, ctx); return 0; - spu = spu_get(ctx, flags); - if (spu != NULL) { - if (ctx->spu != NULL) { - spu_free(spu); - spu_prio_wakeup(); - break; - } - bind_context(spu, ctx); - put_active_spu(spu); - break; } - spu_prio_wait(ctx, flags); - if (signal_pending(current)) { - ret = -ERESTARTSYS; - spu_prio_wakeup(); - break; - } - } - return ret; + + spu_add_to_rq(ctx); + if (!(flags & SPU_ACTIVATE_NOWAKE)) + spu_prio_wait(ctx); + spu_del_from_rq(ctx); + } while (!signal_pending(current)); + + return -ERESTARTSYS; } +/** + * spu_deactivate - unbind a context from it's physical spu + * @ctx: spu context to unbind + * + * Unbind @ctx from the physical spu it is running on and schedule + * the highest priority context to run on the freed physical spu. + */ void spu_deactivate(struct spu_context *ctx) { - struct spu *spu; - int needs_idle; + struct spu *spu = ctx->spu; - spu = ctx->spu; - if (!spu) - return; - needs_idle = get_active_spu(spu); - unbind_context(spu, ctx); - if (needs_idle) { - spu_free(spu); - spu_prio_wakeup(); + if (spu) { + spu_unbind_context(spu, ctx); + spu_reschedule(spu); } } +/** + * spu_yield - yield a physical spu if others are waiting + * @ctx: spu context to yield + * + * Check if there is a higher priority context waiting and if yes + * unbind @ctx from the physical spu and schedule the highest + * priority context to run on the freed physical spu instead. + */ void spu_yield(struct spu_context *ctx) { struct spu *spu; int need_yield = 0; - if (down_write_trylock(&ctx->state_sema)) { + if (mutex_trylock(&ctx->state_mutex)) { if ((spu = ctx->spu) != NULL) { int best = sched_find_first_bit(spu_prio->bitmap); if (best < MAX_PRIO) { pr_debug("%s: yielding SPU %d NODE %d\n", __FUNCTION__, spu->number, spu->node); spu_deactivate(ctx); - ctx->state = SPU_STATE_SAVED; need_yield = 1; - } else { - spu->prio = MAX_PRIO; } } - up_write(&ctx->state_sema); + mutex_unlock(&ctx->state_mutex); } if (unlikely(need_yield)) yield(); @@ -331,14 +472,19 @@ int __init spu_sched_init(void) { int i; + spu_sched_wq = create_singlethread_workqueue("spusched"); + if (!spu_sched_wq) + return 1; + spu_prio = kzalloc(sizeof(struct spu_prio_array), GFP_KERNEL); if (!spu_prio) { printk(KERN_WARNING "%s: Unable to allocate priority queue.\n", __FUNCTION__); + destroy_workqueue(spu_sched_wq); return 1; } for (i = 0; i < MAX_PRIO; i++) { - init_waitqueue_head(&spu_prio->waitq[i]); + INIT_LIST_HEAD(&spu_prio->runq[i]); __clear_bit(i, spu_prio->bitmap); } __set_bit(MAX_PRIO, spu_prio->bitmap); @@ -346,6 +492,7 @@ int __init spu_sched_init(void) mutex_init(&spu_prio->active_mutex[i]); INIT_LIST_HEAD(&spu_prio->active_list[i]); } + spin_lock_init(&spu_prio->runq_lock); return 0; } @@ -364,4 +511,5 @@ void __exit spu_sched_exit(void) mutex_unlock(&spu_prio->active_mutex[node]); } kfree(spu_prio); + destroy_workqueue(spu_sched_wq); } diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 56864469215..0c437891dfd 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -23,7 +23,7 @@ #define SPUFS_H #include <linux/kref.h> -#include <linux/rwsem.h> +#include <linux/mutex.h> #include <linux/spinlock.h> #include <linux/fs.h> @@ -37,11 +37,13 @@ enum { }; struct spu_context_ops; - -#define SPU_CONTEXT_PREEMPT 0UL - struct spu_gang; +/* ctx->sched_flags */ +enum { + SPU_SCHED_WAKE = 0, +}; + struct spu_context { struct spu *spu; /* pointer to a physical SPU */ struct spu_state csa; /* SPU context save area. */ @@ -51,10 +53,12 @@ struct spu_context { struct address_space *cntl; /* 'control' area mappings. */ struct address_space *signal1; /* 'signal1' area mappings. */ struct address_space *signal2; /* 'signal2' area mappings. */ + struct address_space *mss; /* 'mss' area mappings. */ + struct address_space *psmap; /* 'psmap' area mappings. */ u64 object_id; /* user space pointer for oprofile */ enum { SPU_STATE_RUNNABLE, SPU_STATE_SAVED } state; - struct rw_semaphore state_sema; + struct mutex state_mutex; struct semaphore run_sema; struct mm_struct *owner; @@ -75,6 +79,14 @@ struct spu_context { struct list_head gang_list; struct spu_gang *gang; + + /* scheduler fields */ + struct list_head rq; + struct delayed_work sched_work; + unsigned long sched_flags; + unsigned long rt_priority; + int policy; + int prio; }; struct spu_gang { @@ -159,6 +171,16 @@ void spu_gang_remove_ctx(struct spu_gang *gang, struct spu_context *ctx); void spu_gang_add_ctx(struct spu_gang *gang, struct spu_context *ctx); /* context management */ +static inline void spu_acquire(struct spu_context *ctx) +{ + mutex_lock(&ctx->state_mutex); +} + +static inline void spu_release(struct spu_context *ctx) +{ + mutex_unlock(&ctx->state_mutex); +} + struct spu_context * alloc_spu_context(struct spu_gang *gang); void destroy_spu_context(struct kref *kref); struct spu_context * get_spu_context(struct spu_context *ctx); @@ -166,20 +188,18 @@ int put_spu_context(struct spu_context *ctx); void spu_unmap_mappings(struct spu_context *ctx); void spu_forget(struct spu_context *ctx); -void spu_acquire(struct spu_context *ctx); -void spu_release(struct spu_context *ctx); -int spu_acquire_runnable(struct spu_context *ctx); +int spu_acquire_runnable(struct spu_context *ctx, unsigned long flags); void spu_acquire_saved(struct spu_context *ctx); int spu_acquire_exclusive(struct spu_context *ctx); - -static inline void spu_release_exclusive(struct spu_context *ctx) -{ - up_write(&ctx->state_sema); -} - -int spu_activate(struct spu_context *ctx, u64 flags); +enum { + SPU_ACTIVATE_NOWAKE = 1, +}; +int spu_activate(struct spu_context *ctx, unsigned long flags); void spu_deactivate(struct spu_context *ctx); void spu_yield(struct spu_context *ctx); +void spu_start_tick(struct spu_context *ctx); +void spu_stop_tick(struct spu_context *ctx); +void spu_sched_tick(struct work_struct *work); int __init spu_sched_init(void); void __exit spu_sched_exit(void); diff --git a/arch/powerpc/platforms/celleb/htab.c b/arch/powerpc/platforms/celleb/htab.c index ffa7c2c2030..279d7339e17 100644 --- a/arch/powerpc/platforms/celleb/htab.c +++ b/arch/powerpc/platforms/celleb/htab.c @@ -95,7 +95,6 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group, unsigned long lpar_rc; unsigned long slot; unsigned long hpte_v, hpte_r; - unsigned long flags; /* same as iseries */ if (vflags & HPTE_V_SECONDARY) @@ -115,17 +114,17 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group, if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE)) hpte_r &= ~_PAGE_COHERENT; - spin_lock_irqsave(&beat_htab_lock, flags); + spin_lock(&beat_htab_lock); if ((lpar_rc = beat_read_mask(hpte_group)) == 0) { if (!(vflags & HPTE_V_BOLTED)) DBG_LOW(" full\n"); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); return -1; } lpar_rc = beat_insert_htab_entry(0, hpte_group, lpar_rc << 48, hpte_v, hpte_r, &slot); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); /* * Since we try and ioremap PHBs we don't own, the pte insert @@ -189,7 +188,6 @@ static long beat_lpar_hpte_updatepp(unsigned long slot, { unsigned long lpar_rc; unsigned long dummy0, dummy1, want_v; - unsigned long flags; want_v = hpte_encode_v(va, psize); @@ -197,17 +195,17 @@ static long beat_lpar_hpte_updatepp(unsigned long slot, "avpnv=%016lx, slot=%016lx, psize: %d, newpp %016lx ... ", want_v & HPTE_V_AVPN, slot, psize, newpp); - spin_lock_irqsave(&beat_htab_lock, flags); + spin_lock(&beat_htab_lock); dummy0 = beat_lpar_hpte_getword0(slot); if ((dummy0 & ~0x7FUL) != (want_v & ~0x7FUL)) { DBG_LOW("not found !\n"); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); return -1; } lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7, &dummy0, &dummy1); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); if (lpar_rc != 0 || dummy0 == 0) { DBG_LOW("not found !\n"); return -1; @@ -256,18 +254,17 @@ static void beat_lpar_hpte_updateboltedpp(unsigned long newpp, int psize) { unsigned long lpar_rc, slot, vsid, va, dummy0, dummy1; - unsigned long flags; vsid = get_kernel_vsid(ea); va = (vsid << 28) | (ea & 0x0fffffff); - spin_lock_irqsave(&beat_htab_lock, flags); + spin_lock(&beat_htab_lock); slot = beat_lpar_hpte_find(va, psize); BUG_ON(slot == -1); lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7, &dummy0, &dummy1); - spin_unlock_irqrestore(&beat_htab_lock, flags); + spin_unlock(&beat_htab_lock); BUG_ON(lpar_rc != 0); } diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index 61599d919ea..3f6c4114f90 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/initrd.h> -#include <linux/root_dev.h> #include <linux/mtd/physmap.h> #include <asm/time.h> @@ -91,17 +90,6 @@ static void __init linkstation_setup_arch(void) ARRAY_SIZE(linkstation_physmap_partitions)); #endif -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif - /* Lookup PCI host bridges */ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 39db1289021..5e5c0e4add9 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -305,8 +305,6 @@ static int pmac_pic_host_map(struct irq_host *h, unsigned int virq, level = !!(level_mask[hw >> 5] & (1UL << (hw & 0x1f))); if (level) desc->status |= IRQ_LEVEL; - else - desc->status |= IRQ_DELAYED_DISABLE; set_irq_chip_and_handler(virq, &pmac_pic, level ? handle_level_irq : handle_edge_irq); return 0; diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c index d1929721b0e..a397e4e17c1 100644 --- a/arch/powerpc/platforms/ps3/spu.c +++ b/arch/powerpc/platforms/ps3/spu.c @@ -170,31 +170,6 @@ static int __init construct_spu(struct spu *spu) return result; } -static int __init add_spu_pages(unsigned long start_addr, unsigned long size) -{ - int result; - unsigned long start_pfn; - unsigned long nr_pages; - struct pglist_data *pgdata; - struct zone *zone; - - BUG_ON(!mem_init_done); - - start_pfn = start_addr >> PAGE_SHIFT; - nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; - - pgdata = NODE_DATA(0); - zone = pgdata->node_zones; - - result = __add_pages(zone, start_pfn, nr_pages); - - if (result) - pr_debug("%s:%d: __add_pages failed: (%d)\n", - __func__, __LINE__, result); - - return result; -} - static void spu_unmap(struct spu *spu) { iounmap(spu->priv2); @@ -206,19 +181,6 @@ static void spu_unmap(struct spu *spu) static int __init setup_areas(struct spu *spu) { struct table {char* name; unsigned long addr; unsigned long size;}; - int result; - - /* setup pages */ - - result = add_spu_pages(spu->local_store_phys, LS_SIZE); - if (result) - goto fail_add; - - result = add_spu_pages(spu->problem_phys, sizeof(struct spu_problem)); - if (result) - goto fail_add; - - /* ioremap */ spu_pdata(spu)->shadow = __ioremap( spu_pdata(spu)->shadow_addr, sizeof(struct spe_shadow), @@ -260,8 +222,8 @@ static int __init setup_areas(struct spu *spu) fail_ioremap: spu_unmap(spu); -fail_add: - return result; + + return -ENOMEM; } static int __init setup_interrupts(struct spu *spu) diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 69590fbf83d..dc0583bdbc6 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o +obj-$(CONFIG_KEXEC) += kexec.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o diff --git a/arch/powerpc/platforms/pseries/firmware.h b/arch/powerpc/platforms/pseries/firmware.h deleted file mode 100644 index 714f56f5536..00000000000 --- a/arch/powerpc/platforms/pseries/firmware.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright 2006 IBM Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _PSERIES_FIRMWARE_H -#define _PSERIES_FIRMWARE_H - -#include <asm/firmware.h> - -extern void __init fw_feature_init(void); - -#endif /* _PSERIES_FIRMWARE_H */ diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c new file mode 100644 index 00000000000..af268560745 --- /dev/null +++ b/arch/powerpc/platforms/pseries/kexec.c @@ -0,0 +1,72 @@ +/* + * Copyright 2006 Michael Ellerman, IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/machdep.h> +#include <asm/page.h> +#include <asm/firmware.h> +#include <asm/kexec.h> +#include <asm/mpic.h> + +#include "pseries.h" +#include "xics.h" +#include "plpar_wrappers.h" + +static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) +{ + /* Don't risk a hypervisor call if we're crashing */ + if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) { + unsigned long addr; + + addr = __pa(get_slb_shadow()); + if (unregister_slb_shadow(hard_smp_processor_id(), addr)) + printk("SLB shadow buffer deregistration of " + "cpu %u (hw_cpu_id %d) failed\n", + smp_processor_id(), + hard_smp_processor_id()); + + addr = __pa(get_lppaca()); + if (unregister_vpa(hard_smp_processor_id(), addr)) { + printk("VPA deregistration of cpu %u (hw_cpu_id %d) " + "failed\n", smp_processor_id(), + hard_smp_processor_id()); + } + } +} + +static void pseries_kexec_cpu_down_mpic(int crash_shutdown, int secondary) +{ + pseries_kexec_cpu_down(crash_shutdown, secondary); + mpic_teardown_this_cpu(secondary); +} + +void __init setup_kexec_cpu_down_mpic(void) +{ + ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic; +} + +static void pseries_kexec_cpu_down_xics(int crash_shutdown, int secondary) +{ + pseries_kexec_cpu_down(crash_shutdown, secondary); + xics_teardown_cpu(secondary); +} + +void __init setup_kexec_cpu_down_xics(void) +{ + ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics; +} + +static int __init pseries_kexec_setup(void) +{ + ppc_md.machine_kexec = default_machine_kexec; + ppc_md.machine_kexec_prepare = default_machine_kexec_prepare; + ppc_md.machine_crash_shutdown = default_machine_crash_shutdown; + + return 0; +} +__initcall(pseries_kexec_setup); diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index c69bd15ced9..fa59124ce3f 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -98,6 +98,10 @@ static void fixup_winbond_82c105(struct pci_dev* dev) if (dev->resource[i].flags & IORESOURCE_IO && dev->bus->number == 0 && dev->devfn == 0x81) dev->resource[i].flags &= ~IORESOURCE_IO; + if (dev->resource[i].start == 0 && dev->resource[i].end) { + dev->resource[i].flags = 0; + dev->resource[i].end = 0; + } } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105, diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h new file mode 100644 index 00000000000..b43f1397a5b --- /dev/null +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -0,0 +1,36 @@ +/* + * Copyright 2006 IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _PSERIES_PSERIES_H +#define _PSERIES_PSERIES_H + +extern void __init fw_feature_init(void); + +struct pt_regs; + +extern int pSeries_system_reset_exception(struct pt_regs *regs); +extern int pSeries_machine_check_exception(struct pt_regs *regs); + +#ifdef CONFIG_SMP +extern void smp_init_pseries_mpic(void); +extern void smp_init_pseries_xics(void); +#else +static inline smp_init_pseries_mpic(void) { }; +static inline smp_init_pseries_xics(void) { }; +#endif + +#ifdef CONFIG_KEXEC +extern void setup_kexec_cpu_down_xics(void); +extern void setup_kexec_cpu_down_mpic(void); +#else +static inline setup_kexec_cpu_down_xics(void) { }; +static inline setup_kexec_cpu_down_mpic(void) { }; +#endif + +#endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index b1d3d161249..edc03887311 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -51,7 +51,7 @@ #include <asm/udbg.h> #include <asm/firmware.h> -#include "ras.h" +#include "pseries.h" static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX]; static DEFINE_SPINLOCK(ras_log_buf_lock); diff --git a/arch/powerpc/platforms/pseries/ras.h b/arch/powerpc/platforms/pseries/ras.h deleted file mode 100644 index 0e66b0da55e..00000000000 --- a/arch/powerpc/platforms/pseries/ras.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _PSERIES_RAS_H -#define _PSERIES_RAS_H - -struct pt_regs; - -extern int pSeries_system_reset_exception(struct pt_regs *regs); -extern int pSeries_machine_check_exception(struct pt_regs *regs); - -#endif /* _PSERIES_RAS_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 042ecae107a..435a0459652 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -55,7 +55,6 @@ #include <asm/dma.h> #include <asm/machdep.h> #include <asm/irq.h> -#include <asm/kexec.h> #include <asm/time.h> #include <asm/nvram.h> #include "xics.h" @@ -65,10 +64,10 @@ #include <asm/i8259.h> #include <asm/udbg.h> #include <asm/smp.h> +#include <asm/firmware.h> #include "plpar_wrappers.h" -#include "ras.h" -#include "firmware.h" +#include "pseries.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -77,8 +76,6 @@ #endif /* move those away to a .h */ -extern void smp_init_pseries_mpic(void); -extern void smp_init_pseries_xics(void); extern void find_udbg_vterm(void); int fwnmi_active; /* TRUE if an FWNMI handler is present */ @@ -221,42 +218,6 @@ static void pseries_lpar_enable_pmcs(void) get_lppaca()->pmcregs_in_use = 1; } -#ifdef CONFIG_KEXEC -static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) -{ - /* Don't risk a hypervisor call if we're crashing */ - if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) { - unsigned long addr; - - addr = __pa(get_slb_shadow()); - if (unregister_slb_shadow(hard_smp_processor_id(), addr)) - printk("SLB shadow buffer deregistration of " - "cpu %u (hw_cpu_id %d) failed\n", - smp_processor_id(), - hard_smp_processor_id()); - - addr = __pa(get_lppaca()); - if (unregister_vpa(hard_smp_processor_id(), addr)) { - printk("VPA deregistration of cpu %u (hw_cpu_id %d) " - "failed\n", smp_processor_id(), - hard_smp_processor_id()); - } - } -} - -static void pseries_kexec_cpu_down_mpic(int crash_shutdown, int secondary) -{ - pseries_kexec_cpu_down(crash_shutdown, secondary); - mpic_teardown_this_cpu(secondary); -} - -static void pseries_kexec_cpu_down_xics(int crash_shutdown, int secondary) -{ - pseries_kexec_cpu_down(crash_shutdown, secondary); - xics_teardown_cpu(secondary); -} -#endif /* CONFIG_KEXEC */ - static void __init pseries_discover_pic(void) { struct device_node *np; @@ -269,21 +230,13 @@ static void __init pseries_discover_pic(void) pSeries_mpic_node = of_node_get(np); ppc_md.init_IRQ = pseries_mpic_init_IRQ; ppc_md.get_irq = mpic_get_irq; -#ifdef CONFIG_KEXEC - ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic; -#endif -#ifdef CONFIG_SMP + setup_kexec_cpu_down_mpic(); smp_init_pseries_mpic(); -#endif return; } else if (strstr(typep, "ppc-xicp")) { ppc_md.init_IRQ = xics_init_IRQ; -#ifdef CONFIG_KEXEC - ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics; -#endif -#ifdef CONFIG_SMP + setup_kexec_cpu_down_xics(); smp_init_pseries_xics(); -#endif return; } } @@ -554,9 +507,4 @@ define_machine(pseries) { .check_legacy_ioport = pSeries_check_legacy_ioport, .system_reset_exception = pSeries_system_reset_exception, .machine_check_exception = pSeries_machine_check_exception, -#ifdef CONFIG_KEXEC - .machine_kexec = default_machine_kexec, - .machine_kexec_prepare = default_machine_kexec_prepare, - .machine_crash_shutdown = default_machine_crash_shutdown, -#endif }; diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 4408518eaeb..116305b22a2 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -48,6 +48,7 @@ #include <asm/vdso_datapage.h> #include "plpar_wrappers.h" +#include "pseries.h" #ifdef DEBUG #include <asm/udbg.h> diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 9f2a9a444bf..34161bc5a02 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -441,7 +441,8 @@ static int __init fsl_usb_of_init(void) { struct device_node *np; unsigned int i; - struct platform_device *usb_dev_mph = NULL, *usb_dev_dr = NULL; + struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL, + *usb_dev_dr_client = NULL; int ret; for (np = NULL, i = 0; @@ -507,33 +508,72 @@ static int __init fsl_usb_of_init(void) of_irq_to_resource(np, 0, &r[1]); - usb_dev_dr = - platform_device_register_simple("fsl-ehci", i, r, 2); - if (IS_ERR(usb_dev_dr)) { - ret = PTR_ERR(usb_dev_dr); + prop = get_property(np, "dr_mode", NULL); + + if (!prop || !strcmp(prop, "host")) { + usb_data.operating_mode = FSL_USB2_DR_HOST; + usb_dev_dr_host = platform_device_register_simple( + "fsl-ehci", i, r, 2); + if (IS_ERR(usb_dev_dr_host)) { + ret = PTR_ERR(usb_dev_dr_host); + goto err; + } + } else if (prop && !strcmp(prop, "peripheral")) { + usb_data.operating_mode = FSL_USB2_DR_DEVICE; + usb_dev_dr_client = platform_device_register_simple( + "fsl-usb2-udc", i, r, 2); + if (IS_ERR(usb_dev_dr_client)) { + ret = PTR_ERR(usb_dev_dr_client); + goto err; + } + } else if (prop && !strcmp(prop, "otg")) { + usb_data.operating_mode = FSL_USB2_DR_OTG; + usb_dev_dr_host = platform_device_register_simple( + "fsl-ehci", i, r, 2); + if (IS_ERR(usb_dev_dr_host)) { + ret = PTR_ERR(usb_dev_dr_host); + goto err; + } + usb_dev_dr_client = platform_device_register_simple( + "fsl-usb2-udc", i, r, 2); + if (IS_ERR(usb_dev_dr_client)) { + ret = PTR_ERR(usb_dev_dr_client); + goto err; + } + } else { + ret = -EINVAL; goto err; } - usb_dev_dr->dev.coherent_dma_mask = 0xffffffffUL; - usb_dev_dr->dev.dma_mask = &usb_dev_dr->dev.coherent_dma_mask; - - usb_data.operating_mode = FSL_USB2_DR_HOST; - prop = get_property(np, "phy_type", NULL); usb_data.phy_mode = determine_usb_phy(prop); - ret = - platform_device_add_data(usb_dev_dr, &usb_data, - sizeof(struct - fsl_usb2_platform_data)); - if (ret) - goto unreg_dr; + if (usb_dev_dr_host) { + usb_dev_dr_host->dev.coherent_dma_mask = 0xffffffffUL; + usb_dev_dr_host->dev.dma_mask = &usb_dev_dr_host-> + dev.coherent_dma_mask; + if ((ret = platform_device_add_data(usb_dev_dr_host, + &usb_data, sizeof(struct + fsl_usb2_platform_data)))) + goto unreg_dr; + } + if (usb_dev_dr_client) { + usb_dev_dr_client->dev.coherent_dma_mask = 0xffffffffUL; + usb_dev_dr_client->dev.dma_mask = &usb_dev_dr_client-> + dev.coherent_dma_mask; + if ((ret = platform_device_add_data(usb_dev_dr_client, + &usb_data, sizeof(struct + fsl_usb2_platform_data)))) + goto unreg_dr; + } } return 0; unreg_dr: - if (usb_dev_dr) - platform_device_unregister(usb_dev_dr); + if (usb_dev_dr_host) + platform_device_unregister(usb_dev_dr_host); + if (usb_dev_dr_client) + platform_device_unregister(usb_dev_dr_client); unreg_mph: if (usb_dev_mph) platform_device_unregister(usb_dev_mph); @@ -699,7 +739,7 @@ static int __init fs_enet_of_init(void) if (ret) goto unreg; } - + of_node_put(phy); of_node_put(mdio); diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index aa701cc27ec..4e54a09dd33 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1395,4 +1395,25 @@ void smp_mpic_message_pass(int target, int msg) break; } } + +int __init smp_mpic_probe(void) +{ + int nr_cpus; + + DBG("smp_mpic_probe()...\n"); + + nr_cpus = cpus_weight(cpu_possible_map); + + DBG("nr_cpus: %d\n", nr_cpus); + + if (nr_cpus > 1) + mpic_request_ipis(); + + return nr_cpus; +} + +void __devinit smp_mpic_setup_cpu(int cpu) +{ + mpic_setup_this_cpu(); +} #endif /* CONFIG_SMP */ diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index 47b56203f47..0e97e5c94f8 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -179,7 +179,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc uccs->us_info = us_info; uccs->saved_uccm = 0; uccs->p_rx_frame = 0; - uccs->us_regs = us_info->us_regs; + uccs->us_regs = us_info->regs; us_regs = uccs->us_regs; uccs->p_ucce = (u16 *) & (us_regs->ucce); uccs->p_uccm = (u16 *) & (us_regs->uccm); @@ -206,7 +206,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc uccs->us_pram = qe_muram_addr(uccs->us_pram_offset); /* Init Guemr register */ - if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->us_regs)))) { + if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->regs)))) { uccs_err("ucc_slow_init: Could not init the guemr register."); ucc_slow_free(uccs); return ret; @@ -214,7 +214,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Set UCC to slow type */ if ((ret = ucc_set_type(us_info->ucc_num, - (struct ucc_common *) (us_info->us_regs), + (struct ucc_common *) (us_info->regs), UCC_SPEED_TYPE_SLOW))) { uccs_err("ucc_slow_init: Could not init the guemr register."); ucc_slow_free(uccs); diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 77540a2f770..0183e5fbaf4 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2811,7 +2811,6 @@ static void dump_spu_fields(struct spu *spu) DUMP_FIELD(spu, "0x%lx", irqs[2]); DUMP_FIELD(spu, "0x%x", slb_replace); DUMP_FIELD(spu, "%d", pid); - DUMP_FIELD(spu, "%d", prio); DUMP_FIELD(spu, "0x%p", mm); DUMP_FIELD(spu, "0x%p", ctx); DUMP_FIELD(spu, "0x%p", rq); diff --git a/arch/ppc/configs/taishan_defconfig b/arch/ppc/configs/taishan_defconfig new file mode 100644 index 00000000000..1ca0204267b --- /dev/null +++ b/arch/ppc/configs/taishan_defconfig @@ -0,0 +1,1077 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20 +# Mon Feb 12 11:11:58 2007 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_8xx is not set +# CONFIG_E200 is not set +# CONFIG_E500 is not set +CONFIG_PPC_DCR_NATIVE=y +CONFIG_PPC_DCR=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_MATH_EMULATION is not set +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +CONFIG_4xx=y +CONFIG_WANT_EARLY_SERIAL=y + +# +# IBM 4xx options +# +# CONFIG_BAMBOO is not set +# CONFIG_EBONY is not set +# CONFIG_LUAN is not set +# CONFIG_YUCCA is not set +# CONFIG_OCOTEA is not set +CONFIG_TAISHAN=y +CONFIG_440GX=y +CONFIG_440A=y +CONFIG_IBM_OCP=y +CONFIG_IBM_EMAC4=y +CONFIG_PPC4xx_DMA=y +CONFIG_PPC4xx_EDMA=y +CONFIG_PPC_GEN550=y +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +# CONFIG_PC_KEYBOARD is not set +# CONFIG_HIGHMEM is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="ip=on console=ttyS0,115200" +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x01000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=y +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_NAND_CAFE is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_EMAC=y +CONFIG_IBM_EMAC_RXB=128 +CONFIG_IBM_EMAC_TXB=128 +CONFIG_IBM_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0 +CONFIG_IBM_EMAC_PHY_RX_CLK_FIX=y +# CONFIG_IBM_EMAC_DEBUG is not set +CONFIG_IBM_EMAC_ZMII=y +CONFIG_IBM_EMAC_RGMII=y +CONFIG_IBM_EMAC_TAH=y +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=y +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_IBM_IIC=y +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Auxiliary Display support +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_JBD_DEBUG=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KGDB is not set +# CONFIG_XMON is not set +CONFIG_BDI_SWITCH=y +# CONFIG_SERIAL_TEXT_DEBUG is not set +CONFIG_PPC_OCP=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index 66877bdfe0b..1f155d399d5 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -206,7 +206,8 @@ skpinv: addi r6,r6,1 /* Increment */ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ mtspr SPRN_MAS0,r7 tlbre - li r6,0 + mfspr r6,SPRN_MAS1 + rlwinm r6,r6,0,2,0 /* clear IPROT */ mtspr SPRN_MAS1,r6 tlbwe /* Invalidate TLB1 */ @@ -248,6 +249,8 @@ skpinv: addi r6,r6,1 /* Increment */ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ mtspr SPRN_MAS0,r7 tlbre + mfspr r8,SPRN_MAS1 + rlwinm r8,r8,0,2,0 /* clear IPROT */ mtspr SPRN_MAS1,r8 tlbwe /* Invalidate TLB1 */ @@ -889,7 +892,6 @@ load_up_spe: REST_GPR(9, r11) REST_GPR(12, r11) lwz r11,GPR11(r11) - SYNC rfi /* @@ -953,7 +955,6 @@ _GLOBAL(giveup_altivec) _GLOBAL(giveup_spe) mfmsr r5 oris r5,r5,MSR_SPE@h - SYNC mtmsr r5 /* enable use of SPE now */ isync cmpi 0,r3,0 diff --git a/arch/ppc/kernel/ppc_htab.c b/arch/ppc/kernel/ppc_htab.c index bd129d3c2cc..0a7e42d54ea 100644 --- a/arch/ppc/kernel/ppc_htab.c +++ b/arch/ppc/kernel/ppc_htab.c @@ -442,17 +442,22 @@ static ctl_table htab_ctl_table[]={ .mode = 0644, .proc_handler = &proc_dol2crvec, }, - { 0, }, + {} }; static ctl_table htab_sysctl_root[] = { - { 1, "kernel", NULL, 0, 0755, htab_ctl_table, }, - { 0,}, + { + .ctl_name = CTL_KERN, + .procname = "kernel", + .mode = 0555, + .child = htab_ctl_table, + }, + {} }; static int __init register_ppc_htab_sysctl(void) { - register_sysctl_table(htab_sysctl_root, 0); + register_sysctl_table(htab_sysctl_root); return 0; } diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 1f49503317c..1318b6f4c3d 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -271,7 +271,7 @@ EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */ extern long *intercept_table; EXPORT_SYMBOL(intercept_table); #endif /* CONFIG_PPC_STD_MMU */ -#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_DCR_NATIVE EXPORT_SYMBOL(__mtdcr); EXPORT_SYMBOL(__mfdcr); #endif diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 82b06a1ef95..c023b729880 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -314,7 +314,7 @@ void __init mapin_ram(void) } /* is x a power of 4? */ -#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1)) +#define is_power_of_4(x) is_power_of_2(x) && (ffs(x) & 1) /* * Set up a mapping for a block of I/O. diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 6980de420e9..705ae56016f 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -98,6 +98,12 @@ config OCOTEA help This option enables support for the IBM PPC440GX evaluation board. +config TAISHAN + bool "Taishan" + select WANT_EARLY_SERIAL + help + This option enables support for the AMCC PPC440GX evaluation board. + endchoice config EP405PC @@ -126,7 +132,7 @@ config 440GP config 440GX bool - depends on OCOTEA + depends on OCOTEA || TAISHAN default y config 440SP @@ -173,7 +179,7 @@ config BOOKE config IBM_OCP bool - depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || TAISHAN || WALNUT default y config IBM_EMAC4 diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index a04a0d0a0f5..fa6610bccaf 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_OCOTEA) += ocotea.o obj-$(CONFIG_REDWOOD_5) += redwood5.o obj-$(CONFIG_REDWOOD_6) += redwood6.o obj-$(CONFIG_SYCAMORE) += sycamore.o +obj-$(CONFIG_TAISHAN) += taishan.o obj-$(CONFIG_WALNUT) += walnut.o obj-$(CONFIG_XILINX_ML300) += xilinx_ml300.o obj-$(CONFIG_XILINX_ML403) += xilinx_ml403.o diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c new file mode 100644 index 00000000000..bb0253eef45 --- /dev/null +++ b/arch/ppc/platforms/4xx/taishan.c @@ -0,0 +1,395 @@ +/* + * arch/ppc/platforms/4xx/taishan.c + * + * AMCC Taishan board specific routines + * + * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/types.h> +#include <linux/major.h> +#include <linux/blkdev.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/ide.h> +#include <linux/initrd.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/tty.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/ndfc.h> +#include <linux/mtd/physmap.h> + +#include <asm/machdep.h> +#include <asm/ocp.h> +#include <asm/bootinfo.h> +#include <asm/ppcboot.h> + +#include <syslib/gen550.h> +#include <syslib/ibm440gx_common.h> + +extern bd_t __res; + +static struct ibm44x_clocks clocks __initdata; + +/* + * NOR FLASH configuration (using mtd physmap driver) + */ + +/* start will be added dynamically, end is always fixed */ +static struct resource taishan_nor_resource = { + .start = TAISHAN_FLASH_ADDR, + .end = 0x1ffffffffULL, + .flags = IORESOURCE_MEM, +}; + +#define RW_PART0_OF 0 +#define RW_PART0_SZ 0x180000 +#define RW_PART1_SZ 0x200000 +/* Partition 2 will be autosized dynamically... */ +#define RW_PART3_SZ 0x80000 +#define RW_PART4_SZ 0x40000 + +static struct mtd_partition taishan_nor_parts[] = { + { + .name = "kernel", + .offset = 0, + .size = RW_PART0_SZ + }, + { + .name = "root", + .offset = MTDPART_OFS_APPEND, + .size = RW_PART1_SZ, + }, + { + .name = "user", + .offset = MTDPART_OFS_APPEND, +/* .size = RW_PART2_SZ */ /* will be adjusted dynamically */ + }, + { + .name = "env", + .offset = MTDPART_OFS_APPEND, + .size = RW_PART3_SZ, + }, + { + .name = "u-boot", + .offset = MTDPART_OFS_APPEND, + .size = RW_PART4_SZ, + } +}; + +static struct physmap_flash_data taishan_nor_data = { + .width = 4, + .parts = taishan_nor_parts, + .nr_parts = ARRAY_SIZE(taishan_nor_parts), +}; + +static struct platform_device taishan_nor_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &taishan_nor_data, + }, + .num_resources = 1, + .resource = &taishan_nor_resource, +}; + +static int taishan_setup_flash(void) +{ + /* + * Adjust partition 2 to flash size + */ + taishan_nor_parts[2].size = __res.bi_flashsize - + RW_PART0_SZ - RW_PART1_SZ - RW_PART3_SZ - RW_PART4_SZ; + + platform_device_register(&taishan_nor_device); + + return 0; +} +arch_initcall(taishan_setup_flash); + +static void __init +taishan_calibrate_decr(void) +{ + unsigned int freq; + + if (mfspr(SPRN_CCR1) & CCR1_TCS) + freq = TAISHAN_TMR_CLK; + else + freq = clocks.cpu; + + ibm44x_calibrate_decr(freq); +} + +static int +taishan_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: AMCC\n"); + seq_printf(m, "machine\t\t: PPC440GX EVB (Taishan)\n"); + ibm440gx_show_cpuinfo(m); + return 0; +} + +static inline int +taishan_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 23, 24, 25, 26 }, /* IDSEL 1 - PCI Slot 0 */ + { 24, 25, 26, 23 }, /* IDSEL 2 - PCI Slot 1 */ + }; + + const long min_idsel = 1, max_idsel = 2, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +static void __init taishan_set_emacdata(void) +{ + struct ocp_def *def; + struct ocp_func_emac_data *emacdata; + int i; + + /* Set phy_map, phy_mode, and mac_addr for each EMAC */ + for (i=2; i<4; i++) { + def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i); + emacdata = def->additions; + if (i < 2) { + emacdata->phy_map = 0x00000001; /* Skip 0x00 */ + emacdata->phy_mode = PHY_MODE_SMII; + } else { + emacdata->phy_map = 0x00000001; /* Skip 0x00 */ + emacdata->phy_mode = PHY_MODE_RGMII; + } + if (i == 0) + memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6); + else if (i == 1) + memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6); + else if (i == 2) + memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6); + else if (i == 3) + memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6); + } +} + +#define PCIX_READW(offset) \ + (readw(pcix_reg_base+offset)) + +#define PCIX_WRITEW(value, offset) \ + (writew(value, pcix_reg_base+offset)) + +#define PCIX_WRITEL(value, offset) \ + (writel(value, pcix_reg_base+offset)) + +/* + * FIXME: This is only here to "make it work". This will move + * to a ibm_pcix.c which will contain a generic IBM PCIX bridge + * configuration library. -Matt + */ +static void __init +taishan_setup_pcix(void) +{ + void *pcix_reg_base; + + pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE); + + /* Enable PCIX0 I/O, Mem, and Busmaster cycles */ + PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND); + + /* Disable all windows */ + PCIX_WRITEL(0, PCIX0_POM0SA); + PCIX_WRITEL(0, PCIX0_POM1SA); + PCIX_WRITEL(0, PCIX0_POM2SA); + PCIX_WRITEL(0, PCIX0_PIM0SA); + PCIX_WRITEL(0, PCIX0_PIM0SAH); + PCIX_WRITEL(0, PCIX0_PIM1SA); + PCIX_WRITEL(0, PCIX0_PIM2SA); + PCIX_WRITEL(0, PCIX0_PIM2SAH); + + /* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */ + PCIX_WRITEL(0x00000003, PCIX0_POM0LAH); + PCIX_WRITEL(0x80000000, PCIX0_POM0LAL); + PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH); + PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL); + PCIX_WRITEL(0x80000001, PCIX0_POM0SA); + + /* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */ + PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH); + PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL); + PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA); + PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH); + + iounmap(pcix_reg_base); + + eieio(); +} + +static void __init +taishan_setup_hose(void) +{ + struct pci_controller *hose; + + /* Configure windows on the PCI-X host bridge */ + taishan_setup_pcix(); + + hose = pcibios_alloc_controller(); + + if (!hose) + return; + + hose->first_busno = 0; + hose->last_busno = 0xff; + + hose->pci_mem_offset = TAISHAN_PCI_MEM_OFFSET; + + pci_init_resource(&hose->io_resource, + TAISHAN_PCI_LOWER_IO, + TAISHAN_PCI_UPPER_IO, + IORESOURCE_IO, + "PCI host bridge"); + + pci_init_resource(&hose->mem_resources[0], + TAISHAN_PCI_LOWER_MEM, + TAISHAN_PCI_UPPER_MEM, + IORESOURCE_MEM, + "PCI host bridge"); + + hose->io_space.start = TAISHAN_PCI_LOWER_IO; + hose->io_space.end = TAISHAN_PCI_UPPER_IO; + hose->mem_space.start = TAISHAN_PCI_LOWER_MEM; + hose->mem_space.end = TAISHAN_PCI_UPPER_MEM; + hose->io_base_virt = ioremap64(TAISHAN_PCI_IO_BASE, TAISHAN_PCI_IO_SIZE); + isa_io_base = (unsigned long) hose->io_base_virt; + + setup_indirect_pci(hose, + TAISHAN_PCI_CFGA_PLB32, + TAISHAN_PCI_CFGD_PLB32); + hose->set_cfg_type = 1; + + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = taishan_map_irq; +} + + +static void __init +taishan_early_serial_map(void) +{ + struct uart_port port; + + /* Setup ioremapped serial port access */ + memset(&port, 0, sizeof(port)); + port.membase = ioremap64(PPC440GX_UART0_ADDR, 8); + port.irq = UART0_INT; + port.uartclk = clocks.uart0; + port.regshift = 0; + port.iotype = UPIO_MEM; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; + port.line = 0; + + if (early_serial_setup(&port) != 0) + printk("Early serial init of port 0 failed\n"); + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(0, &port); + + /* Purge TLB entry added in head_44x.S for early serial access */ + _tlbie(UART0_IO_BASE); +#endif + + port.membase = ioremap64(PPC440GX_UART1_ADDR, 8); + port.irq = UART1_INT; + port.uartclk = clocks.uart1; + port.line = 1; + + if (early_serial_setup(&port) != 0) + printk("Early serial init of port 1 failed\n"); + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(1, &port); +#endif +} + +static void __init +taishan_setup_arch(void) +{ + taishan_set_emacdata(); + + ibm440gx_tah_enable(); + + /* + * Determine various clocks. + * To be completely correct we should get SysClk + * from FPGA, because it can be changed by on-board switches + * --ebs + */ + ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200); + ocp_sys_info.opb_bus_freq = clocks.opb; + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + /* Setup PCI host bridge */ + taishan_setup_hose(); + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + + taishan_early_serial_map(); + + /* Identify the system */ + printk("AMCC PowerPC 440GX Taishan Platform\n"); +} + +static void __init taishan_init(void) +{ + ibm440gx_l2c_setup(&clocks); +} + +void __init platform_init(unsigned long r3, unsigned long r4, + unsigned long r5, unsigned long r6, unsigned long r7) +{ + ibm44x_platform_init(r3, r4, r5, r6, r7); + + ppc_md.setup_arch = taishan_setup_arch; + ppc_md.show_cpuinfo = taishan_show_cpuinfo; + ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */ + + ppc_md.calibrate_decr = taishan_calibrate_decr; + +#ifdef CONFIG_KGDB + ppc_md.early_serial_map = taishan_early_serial_map; +#endif + ppc_md.init = taishan_init; +} + diff --git a/arch/ppc/platforms/4xx/taishan.h b/arch/ppc/platforms/4xx/taishan.h new file mode 100644 index 00000000000..ea7561a8045 --- /dev/null +++ b/arch/ppc/platforms/4xx/taishan.h @@ -0,0 +1,67 @@ +/* + * arch/ppc/platforms/4xx/taishan.h + * + * AMCC Taishan board definitions + * + * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifdef __KERNEL__ +#ifndef __ASM_TAISHAN_H__ +#define __ASM_TAISHAN_H__ + +#include <platforms/4xx/ibm440gx.h> + +/* External timer clock frequency */ +#define TAISHAN_TMR_CLK 25000000 + +/* Flash */ +#define TAISHAN_FPGA_ADDR 0x0000000141000000ULL +#define TAISHAN_LCM_ADDR 0x0000000142000000ULL +#define TAISHAN_FLASH_ADDR 0x00000001fc000000ULL +#define TAISHAN_FLASH_SIZE 0x4000000 + +/* + * Serial port defines + */ +#define RS_TABLE_SIZE 2 + +/* head_44x.S created UART mapping, used before early_serial_setup. + * We cannot use default OpenBIOS UART mappings because they + * don't work for configurations with more than 512M RAM. --ebs + */ +#define UART0_IO_BASE 0xF0000200 +#define UART1_IO_BASE 0xF0000300 + +#define BASE_BAUD 11059200/16 +#define STD_UART_OP(num) \ + { 0, BASE_BAUD, 0, UART##num##_INT, \ + (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ + iomem_base: (void*)UART##num##_IO_BASE, \ + io_type: SERIAL_IO_MEM}, + +#define SERIAL_PORT_DFNS \ + STD_UART_OP(0) \ + STD_UART_OP(1) + +/* PCI support */ +#define TAISHAN_PCI_LOWER_IO 0x00000000 +#define TAISHAN_PCI_UPPER_IO 0x0000ffff +#define TAISHAN_PCI_LOWER_MEM 0x80000000 +#define TAISHAN_PCI_UPPER_MEM 0xffffefff + +#define TAISHAN_PCI_CFGA_PLB32 0x0ec00000 +#define TAISHAN_PCI_CFGD_PLB32 0x0ec00004 + +#define TAISHAN_PCI_IO_BASE 0x0000000208000000ULL +#define TAISHAN_PCI_IO_SIZE 0x00010000 +#define TAISHAN_PCI_MEM_OFFSET 0x00000000 + +#endif /* __ASM_TAISHAN_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index d84f0466697..09911118c67 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_SANDPOINT) += pci_auto.o todc_time.o obj-$(CONFIG_SBC82xx) += todc_time.o obj-$(CONFIG_SPRUCE) += cpc700_pic.o pci_auto.o \ todc_time.o +obj-$(CONFIG_TAISHAN) += pci_auto.o obj-$(CONFIG_8260) += m8260_setup.o pq2_devices.o pq2_sys.o \ ppc_sys.o obj-$(CONFIG_PCI_8260) += m82xx_pci.o pci_auto.o diff --git a/arch/ppc/syslib/i8259.c b/arch/ppc/syslib/i8259.c index a43dda5a833..1e5a00a4b5f 100644 --- a/arch/ppc/syslib/i8259.c +++ b/arch/ppc/syslib/i8259.c @@ -154,7 +154,7 @@ static struct resource pic_edgectrl_iores = { static struct irqaction i8259_irqaction = { .handler = no_action, - .flags = SA_INTERRUPT, + .flags = IRQF_DISABLED, .mask = CPU_MASK_NONE, .name = "82c59 secondary cascade", }; diff --git a/arch/s390/appldata/appldata.h b/arch/s390/appldata/appldata.h index 0429481dea6..4069b81f7f1 100644 --- a/arch/s390/appldata/appldata.h +++ b/arch/s390/appldata/appldata.h @@ -21,8 +21,7 @@ #define APPLDATA_RECORD_NET_SUM_ID 0x03 /* must be < 256 ! */ #define APPLDATA_RECORD_PROC_ID 0x04 -#define CTL_APPLDATA 2120 /* sysctl IDs, must be unique */ -#define CTL_APPLDATA_TIMER 2121 +#define CTL_APPLDATA_TIMER 2121 /* sysctl IDs, must be unique */ #define CTL_APPLDATA_INTERVAL 2122 #define CTL_APPLDATA_MEM 2123 #define CTL_APPLDATA_OS 2124 diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index c9da7d16145..0c3cf4b16ae 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -506,7 +506,7 @@ int appldata_register_ops(struct appldata_ops *ops) ops->ctl_table[3].ctl_name = 0; - ops->sysctl_header = register_sysctl_table(ops->ctl_table,1); + ops->sysctl_header = register_sysctl_table(ops->ctl_table); P_INFO("%s-ops registered!\n", ops->name); return 0; @@ -606,7 +606,7 @@ static int __init appldata_init(void) /* Register cpu hotplug notifier */ register_hotcpu_notifier(&appldata_nb); - appldata_sysctl_header = register_sysctl_table(appldata_dir_table, 1); + appldata_sysctl_header = register_sysctl_table(appldata_dir_table); #ifdef MODULE appldata_dir_table[0].de->owner = THIS_MODULE; appldata_table[0].de->owner = THIS_MODULE; diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c index 51653d82d7d..eca3fe595ff 100644 --- a/arch/s390/kernel/debug.c +++ b/arch/s390/kernel/debug.c @@ -852,7 +852,6 @@ debug_finish_entry(debug_info_t * id, debug_entry_t* active, int level, static int debug_stoppable=1; static int debug_active=1; -#define CTL_S390DBF 5677 #define CTL_S390DBF_STOPPABLE 5678 #define CTL_S390DBF_ACTIVE 5679 @@ -1054,7 +1053,7 @@ __init debug_init(void) { int rc = 0; - s390dbf_sysctl_header = register_sysctl_table(s390dbf_dir_table, 1); + s390dbf_sysctl_header = register_sysctl_table(s390dbf_dir_table); down(&debug_lock); debug_debugfs_root_entry = debugfs_create_dir(DEBUG_DIR_ROOT,NULL); printk(KERN_INFO "debug: Initialization complete\n"); diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 3b91f27ab20..ee9fd7b8592 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -312,7 +312,7 @@ static struct clocksource clocksource_tod = { .mask = -1ULL, .mult = 1000, .shift = 12, - .is_continuous = 1, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c index f93a056869b..c5b2f4f078b 100644 --- a/arch/s390/mm/cmm.c +++ b/arch/s390/mm/cmm.c @@ -256,10 +256,6 @@ cmm_skip_blanks(char *cp, char **endp) } #ifdef CONFIG_CMM_PROC -/* These will someday get removed. */ -#define VM_CMM_PAGES 1111 -#define VM_CMM_TIMED_PAGES 1112 -#define VM_CMM_TIMEOUT 1113 static struct ctl_table cmm_table[]; @@ -422,7 +418,7 @@ cmm_init (void) int rc = -ENOMEM; #ifdef CONFIG_CMM_PROC - cmm_sysctl_header = register_sysctl_table(cmm_dir_table, 1); + cmm_sysctl_header = register_sysctl_table(cmm_dir_table); if (!cmm_sysctl_header) goto out; #endif diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 4f3891215b8..4d16d891707 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -135,12 +135,6 @@ config SH_HP6XX More information (hardware only) at <http://www.hp.com/jornada/>. -config SH_EC3104 - bool "EC3104" - help - Select EC3104 if configuring for a system with an Eclipse - International EC3104 chip, e.g. the Harris AD2000. - config SH_SATURN bool "Saturn" select CPU_SUBTYPE_SH7604 @@ -156,9 +150,6 @@ config SH_DREAMCAST <http://www.m17n.org/linux-sh/dreamcast/>. There is a Dreamcast project is at <http://linuxdc.sourceforge.net/>. -config SH_BIGSUR - bool "BigSur" - config SH_MPC1211 bool "Interface MPC1211" help @@ -481,6 +472,7 @@ config SH_PCLK_FREQ config SH_CLK_MD int "CPU Mode Pin Setting" + default 0 depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206 help MD2 - MD0 pin setting. @@ -510,8 +502,9 @@ source "arch/sh/cchips/Kconfig" config HEARTBEAT bool "Heartbeat LED" depends on SH_MPC1211 || SH_SH03 || \ - SH_BIGSUR || SOLUTION_ENGINE || \ - SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK + SOLUTION_ENGINE || \ + SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK || \ + SH_R7780RP help Use the power-on LED on your machine as a load meter. The exact behavior is platform-dependent, but normally the flash frequency is @@ -596,6 +589,8 @@ menu "Boot options" config ZERO_PAGE_OFFSET hex "Zero page offset" default "0x00004000" if SH_MPC1211 || SH_SH03 + default "0x00010000" if PAGE_SIZE_64KB + default "0x00002000" if PAGE_SIZE_8KB default "0x00001000" help This sets the default offset of zero page. diff --git a/arch/sh/Makefile b/arch/sh/Makefile index c1dbef21263..bd9b1729f8b 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -35,6 +35,7 @@ endif endif cflags-$(CONFIG_CPU_SH2) := -m2 +cflags-$(CONFIG_CPU_SH2A) := -m2a $(call cc-option,-m2a-nofpu,) cflags-$(CONFIG_CPU_SH3) := -m3 cflags-$(CONFIG_CPU_SH4) := -m4 \ $(call cc-option,-mno-implicit-fp,-m4-nofpu) @@ -93,10 +94,8 @@ machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se/7300 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) := se/7343 machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se/73180 machdir-$(CONFIG_SH_HP6XX) := hp6xx -machdir-$(CONFIG_SH_EC3104) := ec3104 machdir-$(CONFIG_SH_SATURN) := saturn machdir-$(CONFIG_SH_DREAMCAST) := dreamcast -machdir-$(CONFIG_SH_BIGSUR) := bigsur machdir-$(CONFIG_SH_MPC1211) := mpc1211 machdir-$(CONFIG_SH_SH03) := sh03 machdir-$(CONFIG_SH_SECUREEDGE5410) := snapgear diff --git a/arch/sh/boards/bigsur/Makefile b/arch/sh/boards/bigsur/Makefile deleted file mode 100644 index 0ff9497ac58..00000000000 --- a/arch/sh/boards/bigsur/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the BigSur specific parts of the kernel -# - -obj-y := setup.o io.o irq.o led.o - diff --git a/arch/sh/boards/bigsur/io.c b/arch/sh/boards/bigsur/io.c deleted file mode 100644 index 23071f97eec..00000000000 --- a/arch/sh/boards/bigsur/io.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * arch/sh/boards/bigsur/io.c - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * Derived from io_hd64465.h, which bore the message: - * By Greg Banks <gbanks@pocketpenguins.com> - * (c) 2000 PocketPenguins Inc. - * and from io_hd64461.h, which bore the message: - * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IO functions for a Hitachi Big Sur Evaluation Board. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/machvec.h> -#include <asm/io.h> -#include <asm/bigsur/bigsur.h> - -/* Low iomap maps port 0-1K to addresses in 8byte chunks */ -#define BIGSUR_IOMAP_LO_THRESH 0x400 -#define BIGSUR_IOMAP_LO_SHIFT 3 -#define BIGSUR_IOMAP_LO_MASK ((1<<BIGSUR_IOMAP_LO_SHIFT)-1) -#define BIGSUR_IOMAP_LO_NMAP (BIGSUR_IOMAP_LO_THRESH>>BIGSUR_IOMAP_LO_SHIFT) -static u32 bigsur_iomap_lo[BIGSUR_IOMAP_LO_NMAP]; -static u8 bigsur_iomap_lo_shift[BIGSUR_IOMAP_LO_NMAP]; - -/* High iomap maps port 1K-64K to addresses in 1K chunks */ -#define BIGSUR_IOMAP_HI_THRESH 0x10000 -#define BIGSUR_IOMAP_HI_SHIFT 10 -#define BIGSUR_IOMAP_HI_MASK ((1<<BIGSUR_IOMAP_HI_SHIFT)-1) -#define BIGSUR_IOMAP_HI_NMAP (BIGSUR_IOMAP_HI_THRESH>>BIGSUR_IOMAP_HI_SHIFT) -static u32 bigsur_iomap_hi[BIGSUR_IOMAP_HI_NMAP]; -static u8 bigsur_iomap_hi_shift[BIGSUR_IOMAP_HI_NMAP]; - -void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift) -{ - u32 port, endport = baseport + nports; - - pr_debug("bigsur_port_map(base=0x%0x, n=0x%0x, addr=0x%08x)\n", - baseport, nports, addr); - - for (port = baseport ; - port < endport && port < BIGSUR_IOMAP_LO_THRESH ; - port += (1<<BIGSUR_IOMAP_LO_SHIFT)) { - pr_debug(" maplo[0x%x] = 0x%08x\n", port, addr); - bigsur_iomap_lo[port>>BIGSUR_IOMAP_LO_SHIFT] = addr; - bigsur_iomap_lo_shift[port>>BIGSUR_IOMAP_LO_SHIFT] = shift; - addr += (1<<(BIGSUR_IOMAP_LO_SHIFT)); - } - - for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH); - port < endport && port < BIGSUR_IOMAP_HI_THRESH ; - port += (1<<BIGSUR_IOMAP_HI_SHIFT)) { - pr_debug(" maphi[0x%x] = 0x%08x\n", port, addr); - bigsur_iomap_hi[port>>BIGSUR_IOMAP_HI_SHIFT] = addr; - bigsur_iomap_hi_shift[port>>BIGSUR_IOMAP_HI_SHIFT] = shift; - addr += (1<<(BIGSUR_IOMAP_HI_SHIFT)); - } -} -EXPORT_SYMBOL(bigsur_port_map); - -void bigsur_port_unmap(u32 baseport, u32 nports) -{ - u32 port, endport = baseport + nports; - - pr_debug("bigsur_port_unmap(base=0x%0x, n=0x%0x)\n", baseport, nports); - - for (port = baseport ; - port < endport && port < BIGSUR_IOMAP_LO_THRESH ; - port += (1<<BIGSUR_IOMAP_LO_SHIFT)) { - bigsur_iomap_lo[port>>BIGSUR_IOMAP_LO_SHIFT] = 0; - } - - for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH); - port < endport && port < BIGSUR_IOMAP_HI_THRESH ; - port += (1<<BIGSUR_IOMAP_HI_SHIFT)) { - bigsur_iomap_hi[port>>BIGSUR_IOMAP_HI_SHIFT] = 0; - } -} -EXPORT_SYMBOL(bigsur_port_unmap); - -unsigned long bigsur_isa_port2addr(unsigned long port) -{ - unsigned long addr = 0; - unsigned char shift; - - /* Physical address not in P0, do nothing */ - if (PXSEG(port)) { - addr = port; - /* physical address in P0, map to P2 */ - } else if (port >= 0x30000) { - addr = P2SEGADDR(port); - /* Big Sur I/O + HD64465 registers 0x10000-0x30000 */ - } else if (port >= BIGSUR_IOMAP_HI_THRESH) { - addr = BIGSUR_INTERNAL_BASE + (port - BIGSUR_IOMAP_HI_THRESH); - /* Handle remapping of high IO/PCI IO ports */ - } else if (port >= BIGSUR_IOMAP_LO_THRESH) { - addr = bigsur_iomap_hi[port >> BIGSUR_IOMAP_HI_SHIFT]; - shift = bigsur_iomap_hi_shift[port >> BIGSUR_IOMAP_HI_SHIFT]; - - if (addr != 0) - addr += (port & BIGSUR_IOMAP_HI_MASK) << shift; - } else { - /* Handle remapping of low IO ports */ - addr = bigsur_iomap_lo[port >> BIGSUR_IOMAP_LO_SHIFT]; - shift = bigsur_iomap_lo_shift[port >> BIGSUR_IOMAP_LO_SHIFT]; - - if (addr != 0) - addr += (port & BIGSUR_IOMAP_LO_MASK) << shift; - } - - pr_debug("%s(0x%08lx) = 0x%08lx\n", __FUNCTION__, port, addr); - - return addr; -} - diff --git a/arch/sh/boards/bigsur/irq.c b/arch/sh/boards/bigsur/irq.c deleted file mode 100644 index 1ab04da3638..00000000000 --- a/arch/sh/boards/bigsur/irq.c +++ /dev/null @@ -1,334 +0,0 @@ -/* - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * - * Setup and IRQ handling code for the HD64465 companion chip. - * by Greg Banks <gbanks@pocketpenguins.com> - * Copyright (c) 2000 PocketPenguins Inc - * - * Derived from setup_hd64465.c which bore the message: - * Greg Banks <gbanks@pocketpenguins.com> - * Copyright (c) 2000 PocketPenguins Inc and - * Copyright (C) 2000 YAEGASHI Takeshi - * and setup_cqreek.c which bore message: - * Copyright (C) 2000 Niibe Yutaka - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * IRQ functions for a Hitachi Big Sur Evaluation Board. - * - */ -#undef DEBUG - -#include <linux/sched.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/irq.h> - -#include <asm/bigsur/io.h> -#include <asm/hd64465/hd64465.h> -#include <asm/bigsur/bigsur.h> - -//#define BIGSUR_DEBUG 3 -#undef BIGSUR_DEBUG - -#ifdef BIGSUR_DEBUG -#define DIPRINTK(n, args...) if (BIGSUR_DEBUG>(n)) printk(args) -#else -#define DIPRINTK(n, args...) -#endif /* BIGSUR_DEBUG */ - -#ifdef CONFIG_HD64465 -extern int hd64465_irq_demux(int irq); -#endif /* CONFIG_HD64465 */ - - -/*===========================================================*/ -// Big Sur CPLD IRQ Routines -/*===========================================================*/ - -/* Level 1 IRQ routines */ -static void disable_bigsur_l1irq(unsigned int irq) -{ - unsigned char mask; - unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; - unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - pr_debug("Disable L1 IRQ %d\n", irq); - DIPRINTK(2,"disable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Disable IRQ - set mask bit */ - mask = inb(mask_port) | bit; - outb(mask, mask_port); - return; - } - pr_debug("disable_bigsur_l1irq: Invalid IRQ %d\n", irq); -} - -static void enable_bigsur_l1irq(unsigned int irq) -{ - unsigned char mask; - unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0; - unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) ); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - pr_debug("Enable L1 IRQ %d\n", irq); - DIPRINTK(2,"enable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - /* Enable L1 IRQ - clear mask bit */ - mask = inb(mask_port) & ~bit; - outb(mask, mask_port); - return; - } - pr_debug("enable_bigsur_l1irq: Invalid IRQ %d\n", irq); -} - - -/* Level 2 irq masks and registers for L2 decoding */ -/* Level2 bitmasks for each level 1 IRQ */ -const u32 bigsur_l2irq_mask[] = - {0x40,0x80,0x08,0x01,0x01,0x3C,0x3E,0xFF,0x40,0x80,0x06,0x03}; -/* Level2 to ISR[n] map for each level 1 IRQ */ -const u32 bigsur_l2irq_reg[] = - { 2, 2, 3, 3, 1, 2, 1, 0, 1, 1, 3, 2}; -/* Level2 to Level 1 IRQ map */ -const u32 bigsur_l2_l1_map[] = - {7,7,7,7,7,7,7,7, 4,6,6,6,6,6,8,9, 11,11,5,5,5,5,0,1, 3,10,10,2,-1,-1,-1,-1}; -/* IRQ inactive level (high or low) */ -const u32 bigsur_l2_inactv_state[] = {0x00, 0xBE, 0xFC, 0xF7}; - -/* CPLD external status and mask registers base and offsets */ -static const u32 isr_base = BIGSUR_IRQ0; -static const u32 isr_offset = BIGSUR_IRQ0 - BIGSUR_IRQ1; -static const u32 imr_base = BIGSUR_IMR0; -static const u32 imr_offset = BIGSUR_IMR0 - BIGSUR_IMR1; - -#define REG_NUM(irq) ((irq-BIGSUR_2NDLVL_IRQ_LOW)/8 ) - -/* Level 2 IRQ routines */ -static void disable_bigsur_l2irq(unsigned int irq) -{ - unsigned char mask; - unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); - unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; - - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - pr_debug("Disable L2 IRQ %d\n", irq); - DIPRINTK(2,"disable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Disable L2 IRQ - set mask bit */ - mask = inb(mask_port) | bit; - outb(mask, mask_port); - return; - } - pr_debug("disable_bigsur_l2irq: Invalid IRQ %d\n", irq); -} - -static void enable_bigsur_l2irq(unsigned int irq) -{ - unsigned char mask; - unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8); - unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset; - - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - pr_debug("Enable L2 IRQ %d\n", irq); - DIPRINTK(2,"enable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n", - mask_port, bit); - - /* Enable L2 IRQ - clear mask bit */ - mask = inb(mask_port) & ~bit; - outb(mask, mask_port); - return; - } - pr_debug("enable_bigsur_l2irq: Invalid IRQ %d\n", irq); -} - -static void mask_and_ack_bigsur(unsigned int irq) -{ - pr_debug("mask_and_ack_bigsur IRQ %d\n", irq); - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - disable_bigsur_l1irq(irq); - else - disable_bigsur_l2irq(irq); -} - -static void end_bigsur_irq(unsigned int irq) -{ - pr_debug("end_bigsur_irq IRQ %d\n", irq); - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - enable_bigsur_l1irq(irq); - else - enable_bigsur_l2irq(irq); - } -} - -static unsigned int startup_bigsur_irq(unsigned int irq) -{ - u8 mask; - u32 reg; - - pr_debug("startup_bigsur_irq IRQ %d\n", irq); - - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* Enable the L1 IRQ */ - enable_bigsur_l1irq(irq); - /* Enable all L2 IRQs in this L1 IRQ */ - mask = ~(bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]); - reg = imr_base - bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW] * imr_offset; - mask &= inb(reg); - outb(mask,reg); - DIPRINTK(2,"startup_bigsur_irq: IMR=0x%08x mask=0x%x\n",reg,inb(reg)); - } - else { - /* Enable the L2 IRQ - clear mask bit */ - enable_bigsur_l2irq(irq); - /* Enable the L1 bit masking this L2 IRQ */ - enable_bigsur_l1irq(bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW]); - DIPRINTK(2,"startup_bigsur_irq: L1=%d L2=%d\n", - bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW],irq); - } - return 0; -} - -static void shutdown_bigsur_irq(unsigned int irq) -{ - pr_debug("shutdown_bigsur_irq IRQ %d\n", irq); - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) - disable_bigsur_l1irq(irq); - else - disable_bigsur_l2irq(irq); -} - -/* Define the IRQ structures for the L1 and L2 IRQ types */ -static struct hw_interrupt_type bigsur_l1irq_type = { - .typename = "BigSur-CPLD-Level1-IRQ", - .startup = startup_bigsur_irq, - .shutdown = shutdown_bigsur_irq, - .enable = enable_bigsur_l1irq, - .disable = disable_bigsur_l1irq, - .ack = mask_and_ack_bigsur, - .end = end_bigsur_irq -}; - -static struct hw_interrupt_type bigsur_l2irq_type = { - .typename = "BigSur-CPLD-Level2-IRQ", - .startup = startup_bigsur_irq, - .shutdown =shutdown_bigsur_irq, - .enable = enable_bigsur_l2irq, - .disable = disable_bigsur_l2irq, - .ack = mask_and_ack_bigsur, - .end = end_bigsur_irq -}; - - -static void make_bigsur_l1isr(unsigned int irq) { - - /* sanity check first */ - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* save the handler in the main description table */ - irq_desc[irq].chip = &bigsur_l1irq_type; - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = 0; - irq_desc[irq].depth = 1; - - disable_bigsur_l1irq(irq); - return; - } - pr_debug("make_bigsur_l1isr: bad irq, %d\n", irq); - return; -} - -static void make_bigsur_l2isr(unsigned int irq) { - - /* sanity check first */ - if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) { - /* save the handler in the main description table */ - irq_desc[irq].chip = &bigsur_l2irq_type; - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = 0; - irq_desc[irq].depth = 1; - - disable_bigsur_l2irq(irq); - return; - } - pr_debug("make_bigsur_l2isr: bad irq, %d\n", irq); - return; -} - -/* The IRQ's will be decoded as follows: - * If a level 2 handler exists and there is an unmasked active - * IRQ, the 2nd level handler will be called. - * If a level 2 handler does not exist for the active IRQ - * the 1st level handler will be called. - */ - -int bigsur_irq_demux(int irq) -{ - int dmux_irq = irq; - u8 mask, actv_irqs; - u32 reg_num; - - DIPRINTK(3,"bigsur_irq_demux, irq=%d\n", irq); - /* decode the 1st level IRQ */ - if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) { - /* Get corresponding L2 ISR bitmask and ISR number */ - mask = bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]; - reg_num = bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW]; - /* find the active IRQ's (XOR with inactive level)*/ - actv_irqs = inb(isr_base-reg_num*isr_offset) ^ - bigsur_l2_inactv_state[reg_num]; - /* decode active IRQ's */ - actv_irqs = actv_irqs & mask & ~(inb(imr_base-reg_num*imr_offset)); - /* if NEZ then we have an active L2 IRQ */ - if(actv_irqs) dmux_irq = ffz(~actv_irqs) + reg_num*8+BIGSUR_2NDLVL_IRQ_LOW; - /* if no 2nd level IRQ action, but has 1st level, use 1st level handler */ - if(!irq_desc[dmux_irq].action && irq_desc[irq].action) - dmux_irq = irq; - DIPRINTK(1,"bigsur_irq_demux: irq=%d dmux_irq=%d mask=0x%04x reg=%d\n", - irq, dmux_irq, mask, reg_num); - } -#ifdef CONFIG_HD64465 - dmux_irq = hd64465_irq_demux(dmux_irq); -#endif /* CONFIG_HD64465 */ - DIPRINTK(3,"bigsur_irq_demux, demux_irq=%d\n", dmux_irq); - - return dmux_irq; -} - -/*===========================================================*/ -// Big Sur Init Routines -/*===========================================================*/ -void __init init_bigsur_IRQ(void) -{ - int i; - - if (!MACH_BIGSUR) return; - - /* Create ISR's for Big Sur CPLD IRQ's */ - /*==============================================================*/ - for(i=BIGSUR_IRQ_LOW;i<BIGSUR_IRQ_HIGH;i++) - make_bigsur_l1isr(i); - - printk(KERN_INFO "Big Sur CPLD L1 interrupts %d to %d.\n", - BIGSUR_IRQ_LOW,BIGSUR_IRQ_HIGH); - - for(i=BIGSUR_2NDLVL_IRQ_LOW;i<BIGSUR_2NDLVL_IRQ_HIGH;i++) - make_bigsur_l2isr(i); - - printk(KERN_INFO "Big Sur CPLD L2 interrupts %d to %d.\n", - BIGSUR_2NDLVL_IRQ_LOW,BIGSUR_2NDLVL_IRQ_HIGH); - -} diff --git a/arch/sh/boards/bigsur/led.c b/arch/sh/boards/bigsur/led.c deleted file mode 100644 index d221439aafc..00000000000 --- a/arch/sh/boards/bigsur/led.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/arch/sh/boards/bigsur/led.c - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * Derived from led_se.c and led.c, which bore the message: - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Big Sur specific LED code. - */ - -#include <asm/io.h> -#include <asm/bigsur/bigsur.h> - -static void mach_led(int position, int value) -{ - int word; - - word = bigsur_inl(BIGSUR_CSLR); - if (value) { - bigsur_outl(word & ~BIGSUR_LED, BIGSUR_CSLR); - } else { - bigsur_outl(word | BIGSUR_LED, BIGSUR_CSLR); - } -} - -#ifdef CONFIG_HEARTBEAT - -#include <linux/sched.h> - -/* Cycle the LED on/off */ -void heartbeat_bigsur(void) -{ - static unsigned cnt = 0, period = 0, dist = 0; - - if (cnt == 0 || cnt == dist) - mach_led( -1, 1); - else if (cnt == 7 || cnt == dist+7) - mach_led( -1, 0); - - if (++cnt > period) { - cnt = 0; - /* The hyperbolic function below modifies the heartbeat period - * length in dependency of the current (5min) load. It goes - * through the points f(0)=126, f(1)=86, f(5)=51, - * f(inf)->30. */ - period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30; - dist = period / 4; - } -} -#endif /* CONFIG_HEARTBEAT */ - diff --git a/arch/sh/boards/bigsur/setup.c b/arch/sh/boards/bigsur/setup.c deleted file mode 100644 index 9711c20fc9e..00000000000 --- a/arch/sh/boards/bigsur/setup.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * - * Setup and IRQ handling code for the HD64465 companion chip. - * by Greg Banks <gbanks@pocketpenguins.com> - * Copyright (c) 2000 PocketPenguins Inc - * - * Derived from setup_hd64465.c which bore the message: - * Greg Banks <gbanks@pocketpenguins.com> - * Copyright (c) 2000 PocketPenguins Inc and - * Copyright (C) 2000 YAEGASHI Takeshi - * and setup_cqreek.c which bore message: - * Copyright (C) 2000 Niibe Yutaka - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Setup functions for a Hitachi Big Sur Evaluation Board. - * - */ - -#include <linux/sched.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/machvec.h> -#include <asm/bigsur/io.h> -#include <asm/hd64465/hd64465.h> -#include <asm/bigsur/bigsur.h> - -/*===========================================================*/ -// Big Sur Init Routines -/*===========================================================*/ - -static void __init bigsur_setup(char **cmdline_p) -{ - /* Mask all 2nd level IRQ's */ - outb(-1,BIGSUR_IMR0); - outb(-1,BIGSUR_IMR1); - outb(-1,BIGSUR_IMR2); - outb(-1,BIGSUR_IMR3); - - /* Mask 1st level interrupts */ - outb(-1,BIGSUR_IRLMR0); - outb(-1,BIGSUR_IRLMR1); - -#if defined (CONFIG_HD64465) && defined (CONFIG_SERIAL) - /* remap IO ports for first ISA serial port to HD64465 UART */ - bigsur_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1); -#endif /* CONFIG_HD64465 && CONFIG_SERIAL */ - /* TODO: setup IDE registers */ - bigsur_port_map(BIGSUR_IDECTL_IOPORT, 2, BIGSUR_ICTL, 8); - /* Setup the Ethernet port to BIGSUR_ETHER_IOPORT */ - bigsur_port_map(BIGSUR_ETHER_IOPORT, 16, BIGSUR_ETHR+BIGSUR_ETHER_IOPORT, 0); - /* set page to 1 */ - outw(1, BIGSUR_ETHR+0xe); - /* set the IO port to BIGSUR_ETHER_IOPORT */ - outw(BIGSUR_ETHER_IOPORT<<3, BIGSUR_ETHR+0x2); -} - -/* - * The Machine Vector - */ -extern void heartbeat_bigsur(void); -extern void init_bigsur_IRQ(void); - -struct sh_machine_vector mv_bigsur __initmv = { - .mv_name = "Big Sur", - .mv_setup = bigsur_setup, - - .mv_isa_port2addr = bigsur_isa_port2addr, - .mv_irq_demux = bigsur_irq_demux, - - .mv_init_irq = init_bigsur_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_bigsur, -#endif -}; -ALIAS_MV(bigsur) diff --git a/arch/sh/boards/ec3104/Makefile b/arch/sh/boards/ec3104/Makefile deleted file mode 100644 index 178891534b6..00000000000 --- a/arch/sh/boards/ec3104/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the EC3104 specific parts of the kernel -# - -obj-y := setup.o io.o irq.o - diff --git a/arch/sh/boards/ec3104/io.c b/arch/sh/boards/ec3104/io.c deleted file mode 100644 index 2f86394b280..00000000000 --- a/arch/sh/boards/ec3104/io.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * linux/arch/sh/boards/ec3104/io.c - * EC3104 companion chip support - * - * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> - * - */ -/* EC3104 note: - * This code was written without any documentation about the EC3104 chip. While - * I hope I got most of the basic functionality right, the register names I use - * are most likely completely different from those in the chip documentation. - * - * If you have any further information about the EC3104, please tell me - * (prumpf@tux.org). - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <asm/io.h> -#include <asm/page.h> -#include <asm/ec3104/ec3104.h> - -/* - * EC3104 has a real ISA bus which we redirect low port accesses to (the - * actual device on mine is a ESS 1868, and I don't want to hack the driver - * more than strictly necessary). I am not going to duplicate the - * hard coding of PC addresses (for the 16550s aso) here though; it's just - * too ugly. - */ - -#define low_port(port) ((port) < 0x10000) - -static inline unsigned long port2addr(unsigned long port) -{ - switch(port >> 16) { - case 0: - return EC3104_ISA_BASE + port * 2; - - /* XXX hack. it's unclear what to do about the serial ports */ - case 1: - return EC3104_BASE + (port&0xffff) * 4; - - default: - /* XXX PCMCIA */ - return 0; - } -} - -unsigned char ec3104_inb(unsigned long port) -{ - u8 ret; - - ret = *(volatile u8 *)port2addr(port); - - return ret; -} - -unsigned short ec3104_inw(unsigned long port) -{ - BUG(); -} - -unsigned long ec3104_inl(unsigned long port) -{ - BUG(); -} - -void ec3104_outb(unsigned char data, unsigned long port) -{ - *(volatile u8 *)port2addr(port) = data; -} - -void ec3104_outw(unsigned short data, unsigned long port) -{ - BUG(); -} - -void ec3104_outl(unsigned long data, unsigned long port) -{ - BUG(); -} diff --git a/arch/sh/boards/ec3104/irq.c b/arch/sh/boards/ec3104/irq.c deleted file mode 100644 index ffa4ff1f090..00000000000 --- a/arch/sh/boards/ec3104/irq.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * linux/arch/sh/boards/ec3104/irq.c - * EC3104 companion chip support - * - * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> - * - */ - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/ec3104/ec3104.h> - -/* This is for debugging mostly; here's the table that I intend to keep - * in here: - * - * index function base addr power interrupt bit - * 0 power b0ec0000 --- 00000001 (unused) - * 1 irqs b0ec1000 --- 00000002 (unused) - * 2 ?? b0ec2000 b0ec0008 00000004 - * 3 PS2 (1) b0ec3000 b0ec000c 00000008 - * 4 PS2 (2) b0ec4000 b0ec0010 00000010 - * 5 ?? b0ec5000 b0ec0014 00000020 - * 6 I2C b0ec6000 b0ec0018 00000040 - * 7 serial (1) b0ec7000 b0ec001c 00000080 - * 8 serial (2) b0ec8000 b0ec0020 00000100 - * 9 serial (3) b0ec9000 b0ec0024 00000200 - * 10 serial (4) b0eca000 b0ec0028 00000400 - * 12 GPIO (1) b0ecc000 b0ec0030 - * 13 GPIO (2) b0ecc000 b0ec0030 - * 16 pcmcia (1) b0ed0000 b0ec0040 00010000 - * 17 pcmcia (2) b0ed1000 b0ec0044 00020000 - */ - -/* I used the register names from another interrupt controller I worked with, - * since it seems to be identical to the ec3104 except that all bits are - * inverted: - * - * IRR: Interrupt Request Register (pending and enabled interrupts) - * IMR: Interrupt Mask Register (which interrupts are enabled) - * IPR: Interrupt Pending Register (pending interrupts, even disabled ones) - * - * 0 bits mean pending or enabled, 1 bits mean not pending or disabled. all - * IRQs seem to be level-triggered. - */ - -#define EC3104_IRR (EC3104_BASE + 0x1000) -#define EC3104_IMR (EC3104_BASE + 0x1004) -#define EC3104_IPR (EC3104_BASE + 0x1008) - -#define ctrl_readl(addr) (*(volatile u32 *)(addr)) -#define ctrl_writel(data,addr) (*(volatile u32 *)(addr) = (data)) -#define ctrl_readb(addr) (*(volatile u8 *)(addr)) - -static char *ec3104_name(unsigned index) -{ - switch(index) { - case 0: - return "power management"; - case 1: - return "interrupts"; - case 3: - return "PS2 (1)"; - case 4: - return "PS2 (2)"; - case 5: - return "I2C (1)"; - case 6: - return "I2C (2)"; - case 7: - return "serial (1)"; - case 8: - return "serial (2)"; - case 9: - return "serial (3)"; - case 10: - return "serial (4)"; - case 16: - return "pcmcia (1)"; - case 17: - return "pcmcia (2)"; - default: { - static char buf[32]; - - sprintf(buf, "unknown (%d)", index); - - return buf; - } - } -} - -int get_pending_interrupts(char *buf) -{ - u32 ipr; - u32 bit; - char *p = buf; - - p += sprintf(p, "pending: ("); - - ipr = ctrl_inl(EC3104_IPR); - - for (bit = 1; bit < 32; bit++) - if (!(ipr & (1<<bit))) - p += sprintf(p, "%s ", ec3104_name(bit)); - - p += sprintf(p, ")\n"); - - return p - buf; -} - -static inline u32 ec3104_irq2mask(unsigned int irq) -{ - return (1 << (irq - EC3104_IRQBASE)); -} - -static inline void mask_ec3104_irq(unsigned int irq) -{ - u32 mask; - - mask = ctrl_readl(EC3104_IMR); - - mask |= ec3104_irq2mask(irq); - - ctrl_writel(mask, EC3104_IMR); -} - -static inline void unmask_ec3104_irq(unsigned int irq) -{ - u32 mask; - - mask = ctrl_readl(EC3104_IMR); - - mask &= ~ec3104_irq2mask(irq); - - ctrl_writel(mask, EC3104_IMR); -} - -static void disable_ec3104_irq(unsigned int irq) -{ - mask_ec3104_irq(irq); -} - -static void enable_ec3104_irq(unsigned int irq) -{ - unmask_ec3104_irq(irq); -} - -static void mask_and_ack_ec3104_irq(unsigned int irq) -{ - mask_ec3104_irq(irq); -} - -static void end_ec3104_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - unmask_ec3104_irq(irq); -} - -static unsigned int startup_ec3104_irq(unsigned int irq) -{ - unmask_ec3104_irq(irq); - - return 0; -} - -static void shutdown_ec3104_irq(unsigned int irq) -{ - mask_ec3104_irq(irq); - -} - -static struct hw_interrupt_type ec3104_int = { - .typename = "EC3104", - .enable = enable_ec3104_irq, - .disable = disable_ec3104_irq, - .ack = mask_and_ack_ec3104_irq, - .end = end_ec3104_irq, - .startup = startup_ec3104_irq, - .shutdown = shutdown_ec3104_irq, -}; - -/* Yuck. the _demux API is ugly */ -int ec3104_irq_demux(int irq) -{ - if (irq == EC3104_IRQ) { - unsigned int mask; - - mask = ctrl_readl(EC3104_IRR); - - if (mask == 0xffffffff) - return EC3104_IRQ; - else - return EC3104_IRQBASE + ffz(mask); - } - - return irq; -} diff --git a/arch/sh/boards/ec3104/setup.c b/arch/sh/boards/ec3104/setup.c deleted file mode 100644 index 902bc975a13..00000000000 --- a/arch/sh/boards/ec3104/setup.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * linux/arch/sh/boards/ec3104/setup.c - * EC3104 companion chip support - * - * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> - * - */ -/* EC3104 note: - * This code was written without any documentation about the EC3104 chip. While - * I hope I got most of the basic functionality right, the register names I use - * are most likely completely different from those in the chip documentation. - * - * If you have any further information about the EC3104, please tell me - * (prumpf@tux.org). - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/types.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/machvec.h> -#include <asm/mach/ec3104.h> - -static void __init ec3104_setup(char **cmdline_p) -{ - char str[8]; - int i; - - for (i=0; i<8; i++) - str[i] = ctrl_readb(EC3104_BASE + i); - - for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++) - irq_desc[i].handler = &ec3104_int; - - printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n", - str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE); - - /* mask all interrupts. this should have been done by the boot - * loader for us but we want to be sure ... */ - ctrl_writel(0xffffffff, EC3104_IMR); -} - -/* - * The Machine Vector - */ -struct sh_machine_vector mv_ec3104 __initmv = { - .mv_name = "EC3104", - .mv_setup = ec3104_setup, - .mv_nr_irqs = 96, - - .mv_inb = ec3104_inb, - .mv_inw = ec3104_inw, - .mv_inl = ec3104_inl, - .mv_outb = ec3104_outb, - .mv_outw = ec3104_outw, - .mv_outl = ec3104_outl, - - .mv_irq_demux = ec3104_irq_demux, -}; -ALIAS_MV(ec3104) diff --git a/arch/sh/boards/mpc1211/Makefile b/arch/sh/boards/mpc1211/Makefile index 1644ebed78c..8cd31b5d200 100644 --- a/arch/sh/boards/mpc1211/Makefile +++ b/arch/sh/boards/mpc1211/Makefile @@ -2,7 +2,7 @@ # Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel # -obj-y := setup.o rtc.o led.o +obj-y := setup.o rtc.o obj-$(CONFIG_PCI) += pci.o diff --git a/arch/sh/boards/mpc1211/led.c b/arch/sh/boards/mpc1211/led.c deleted file mode 100644 index 8df1591823d..00000000000 --- a/arch/sh/boards/mpc1211/led.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/arch/sh/boards/mpc1211/led.c - * - * Copyright (C) 2001 Saito.K & Jeanne - * - * This file contains Interface MPC-1211 specific LED code. - */ - - -static void mach_led(int position, int value) -{ - volatile unsigned char* p = (volatile unsigned char*)0xa2000000; - - if (value) { - *p |= 1; - } else { - *p &= ~1; - } -} - -#ifdef CONFIG_HEARTBEAT - -#include <linux/sched.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_mpc1211(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned char* p = (volatile unsigned char*)0xa2000000; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300<<FSHIFT)/ - ((avenrun[0]/5) + (3<<FSHIFT)) ); - - if (up) { - if (bit == 7) { - bit--; - up=0; - } else { - bit ++; - } - } else { - if (bit == 0) { - bit++; - up=1; - } else { - bit--; - } - } - *p = 1<<bit; - -} -#endif /* CONFIG_HEARTBEAT */ diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c index 7c3d1d30415..1a0604b23ce 100644 --- a/arch/sh/boards/mpc1211/setup.c +++ b/arch/sh/boards/mpc1211/setup.c @@ -10,6 +10,7 @@ #include <linux/hdreg.h> #include <linux/ide.h> #include <linux/interrupt.h> +#include <linux/platform_device.h> #include <asm/io.h> #include <asm/machvec.h> #include <asm/mpc1211/mpc1211.h> @@ -281,6 +282,32 @@ static int put_smb_blk(unsigned char *p, int address, int command, int no) return 0; } +static struct resource heartbeat_resources[] = { + [0] = { + .start = 0xa2000000, + .end = 0xa2000000 + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *mpc1211_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init mpc1211_devices_setup(void) +{ + return platform_add_devices(mpc1211_devices, + ARRAY_SIZE(mpc1211_devices)); +} +__initcall(mpc1211_devices_setup); + /* arch/sh/boards/mpc1211/rtc.c */ void mpc1211_time_init(void); @@ -317,9 +344,5 @@ struct sh_machine_vector mv_mpc1211 __initmv = { .mv_nr_irqs = 48, .mv_irq_demux = mpc1211_irq_demux, .mv_init_irq = init_mpc1211_IRQ, - -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_mpc1211, -#endif }; ALIAS_MV(mpc1211) diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile index 574b0316ed5..3c93012e91a 100644 --- a/arch/sh/boards/renesas/r7780rp/Makefile +++ b/arch/sh/boards/renesas/r7780rp/Makefile @@ -4,5 +4,4 @@ obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o obj-$(CONFIG_PUSH_SWITCH) += psw.o diff --git a/arch/sh/boards/renesas/r7780rp/io.c b/arch/sh/boards/renesas/r7780rp/io.c index 311ccccba71..f74d2ffb385 100644 --- a/arch/sh/boards/renesas/r7780rp/io.c +++ b/arch/sh/boards/renesas/r7780rp/io.c @@ -11,22 +11,9 @@ #include <linux/pci.h> #include <linux/kernel.h> #include <linux/types.h> +#include <linux/io.h> #include <asm/r7780rp.h> #include <asm/addrspace.h> -#include <asm/io.h> - -static inline unsigned long port2adr(unsigned int port) -{ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - if (port == 0x3f6) - return (PA_AREA5_IO + 0x80c); - else - return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1)); - else - maybebadio((unsigned long)port); - - return port; -} static inline unsigned long port88796l(unsigned int port, int flag) { @@ -40,18 +27,6 @@ static inline unsigned long port88796l(unsigned int port, int flag) return addr; } -/* The 7780 R7780RP-1 seems to have everything hooked */ -/* up pretty normally (nothing on high-bytes only...) so this */ -/* shouldn't be needed */ -static inline int shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} - #if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE) #define CHECK_AX88796L_PORT(port) \ ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20))) @@ -70,12 +45,10 @@ u8 r7780rp_inb(unsigned long port) { if (CHECK_AX88796L_PORT(port)) return ctrl_inw(port88796l(port, 0)) & 0xff; - else if (PXSEG(port)) - return ctrl_inb(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) return ctrl_inb(pci_ioaddr(port)); - return ctrl_inw(port2adr(port)) & 0xff; + return ctrl_inw(port) & 0xff; } u8 r7780rp_inb_p(unsigned long port) @@ -84,12 +57,10 @@ u8 r7780rp_inb_p(unsigned long port) if (CHECK_AX88796L_PORT(port)) v = ctrl_inw(port88796l(port, 0)) & 0xff; - else if (PXSEG(port)) - v = ctrl_inb(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) v = ctrl_inb(pci_ioaddr(port)); else - v = ctrl_inw(port2adr(port)) & 0xff; + v = ctrl_inw(port) & 0xff; ctrl_delay(); @@ -98,80 +69,56 @@ u8 r7780rp_inb_p(unsigned long port) u16 r7780rp_inw(unsigned long port) { - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - return ctrl_inw(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + if (is_pci_ioaddr(port)) return ctrl_inw(pci_ioaddr(port)); - else - maybebadio(port); - return 0; + return ctrl_inw(port); } u32 r7780rp_inl(unsigned long port) { - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - return ctrl_inl(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + if (is_pci_ioaddr(port)) return ctrl_inl(pci_ioaddr(port)); - else - maybebadio(port); - return 0; + return ctrl_inl(port); } void r7780rp_outb(u8 value, unsigned long port) { if (CHECK_AX88796L_PORT(port)) ctrl_outw(value, port88796l(port, 0)); - else if (PXSEG(port)) - ctrl_outb(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) ctrl_outb(value, pci_ioaddr(port)); else - ctrl_outw(value, port2adr(port)); + ctrl_outb(value, port); } void r7780rp_outb_p(u8 value, unsigned long port) { if (CHECK_AX88796L_PORT(port)) ctrl_outw(value, port88796l(port, 0)); - else if (PXSEG(port)) - ctrl_outb(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) ctrl_outb(value, pci_ioaddr(port)); else - ctrl_outw(value, port2adr(port)); + ctrl_outb(value, port); ctrl_delay(); } void r7780rp_outw(u16 value, unsigned long port) { - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - ctrl_outw(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + if (is_pci_ioaddr(port)) ctrl_outw(value, pci_ioaddr(port)); else - maybebadio(port); + ctrl_outw(value, port); } void r7780rp_outl(u32 value, unsigned long port) { - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - ctrl_outl(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) + if (is_pci_ioaddr(port)) ctrl_outl(value, pci_ioaddr(port)); else - maybebadio(port); + ctrl_outl(value, port); } void r7780rp_insb(unsigned long port, void *dst, unsigned long count) @@ -183,16 +130,13 @@ void r7780rp_insb(unsigned long port, void *dst, unsigned long count) p = (volatile u16 *)port88796l(port, 0); while (count--) *buf++ = *p & 0xff; - } else if (PXSEG(port)) { - while (count--) - *buf++ = *(volatile u8 *)port; - } else if (is_pci_ioaddr(port) || shifted_port(port)) { + } else if (is_pci_ioaddr(port)) { volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); while (count--) *buf++ = *bp; } else { - p = (volatile u16 *)port2adr(port); + p = (volatile u16 *)port; while (count--) *buf++ = *p & 0xff; } @@ -205,30 +149,26 @@ void r7780rp_insw(unsigned long port, void *dst, unsigned long count) if (CHECK_AX88796L_PORT(port)) p = (volatile u16 *)port88796l(port, 1); - else if (PXSEG(port)) - p = (volatile u16 *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) p = (volatile u16 *)pci_ioaddr(port); else - p = (volatile u16 *)port2adr(port); + p = (volatile u16 *)port; while (count--) *buf++ = *p; + + flush_dcache_all(); } void r7780rp_insl(unsigned long port, void *dst, unsigned long count) { - u32 *buf = dst; - - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { + if (is_pci_ioaddr(port)) { volatile u32 *p = (volatile u32 *)pci_ioaddr(port); + u32 *buf = dst; while (count--) *buf++ = *p; - } else - maybebadio(port); + } } void r7780rp_outsb(unsigned long port, const void *src, unsigned long count) @@ -240,19 +180,14 @@ void r7780rp_outsb(unsigned long port, const void *src, unsigned long count) p = (volatile u16 *)port88796l(port, 0); while (count--) *p = *buf++; - } else if (PXSEG(port)) - while (count--) - ctrl_outb(*buf++, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { + } else if (is_pci_ioaddr(port)) { volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); while (count--) *bp = *buf++; - } else { - p = (volatile u16 *)port2adr(port); + } else while (count--) - *p = *buf++; - } + ctrl_outb(*buf++, port); } void r7780rp_outsw(unsigned long port, const void *src, unsigned long count) @@ -262,40 +197,37 @@ void r7780rp_outsw(unsigned long port, const void *src, unsigned long count) if (CHECK_AX88796L_PORT(port)) p = (volatile u16 *)port88796l(port, 1); - else if (PXSEG(port)) - p = (volatile u16 *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) p = (volatile u16 *)pci_ioaddr(port); else - p = (volatile u16 *)port2adr(port); + p = (volatile u16 *)port; while (count--) *p = *buf++; + + flush_dcache_all(); } void r7780rp_outsl(unsigned long port, const void *src, unsigned long count) { const u32 *buf = src; + u32 *p; - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - volatile u32 *p = (volatile u32 *)pci_ioaddr(port); + if (is_pci_ioaddr(port)) + p = (u32 *)pci_ioaddr(port); + else + p = (u32 *)port; - while (count--) - *p = *buf++; - } else - maybebadio(port); + while (count--) + ctrl_outl(*buf++, (unsigned long)p); } void __iomem *r7780rp_ioport_map(unsigned long port, unsigned int size) { if (CHECK_AX88796L_PORT(port)) return (void __iomem *)port88796l(port, size > 1); - else if (PXSEG(port)) - return (void __iomem *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) + else if (is_pci_ioaddr(port)) return (void __iomem *)pci_ioaddr(port); - return (void __iomem *)port2adr(port); + return (void __iomem *)port; } diff --git a/arch/sh/boards/renesas/r7780rp/led.c b/arch/sh/boards/renesas/r7780rp/led.c deleted file mode 100644 index 6a00a257afd..00000000000 --- a/arch/sh/boards/renesas/r7780rp/led.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) Atom Create Engineering Co., Ltd. - * - * May be copied or modified under the terms of GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Renesas Solutions HIGHLANDER R7780RP-1 specific LED code. - */ -#include <linux/sched.h> -#include <asm/io.h> -#include <asm/r7780rp/r7780rp.h> - -/* Cycle the LED's in the clasic Knightriger/Sun pattern */ -void heartbeat_r7780rp(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *)PA_OBLED; - static unsigned bit = 0, up = 1; - unsigned bit_pos[] = {2, 1, 0, 3, 6, 5, 4, 7}; - - cnt += 1; - if (cnt < period) - return; - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110 - */ - period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3<<FSHIFT))); - - *p = 1 << bit_pos[bit]; - if (up) - if (bit == 7) { - bit--; - up = 0; - } else - bit++; - else if (bit == 0) - up = 1; - else - bit--; -} diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index 9f89c8de9db..0d74db9f179 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -2,7 +2,7 @@ * arch/sh/boards/renesas/r7780rp/setup.c * * Copyright (C) 2002 Atom Create Engineering Co., Ltd. - * Copyright (C) 2005, 2006 Paul Mundt + * Copyright (C) 2005 - 2007 Paul Mundt * * Renesas Solutions Highlander R7780RP-1 Support. * @@ -12,12 +12,12 @@ */ #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/pata_platform.h> #include <asm/machvec.h> #include <asm/r7780rp.h> #include <asm/clock.h> #include <asm/io.h> -extern void heartbeat_r7780rp(void); extern void init_r7780rp_IRQ(void); static struct resource m66596_usb_host_resources[] = { @@ -46,14 +46,14 @@ static struct platform_device m66596_usb_host_device = { static struct resource cf_ide_resources[] = { [0] = { - .start = 0x1f0, - .end = 0x1f0 + 8, - .flags = IORESOURCE_IO, + .start = PA_AREA5_IO + 0x1000, + .end = PA_AREA5_IO + 0x1000 + 0x08 - 1, + .flags = IORESOURCE_MEM, }, [1] = { - .start = 0x1f0 + 0x206, - .end = 0x1f0 + 8 + 0x206 + 8, - .flags = IORESOURCE_IO, + .start = PA_AREA5_IO + 0x80c, + .end = PA_AREA5_IO + 0x80c + 0x16 - 1, + .flags = IORESOURCE_MEM, }, [2] = { #ifdef CONFIG_SH_R7780MP @@ -65,16 +65,44 @@ static struct resource cf_ide_resources[] = { }, }; +static struct pata_platform_info pata_info = { + .ioport_shift = 1, +}; + static struct platform_device cf_ide_device = { .name = "pata_platform", .id = -1, .num_resources = ARRAY_SIZE(cf_ide_resources), .resource = cf_ide_resources, + .dev = { + .platform_data = &pata_info, + }, +}; + +static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_OBLED, + .end = PA_OBLED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, }; static struct platform_device *r7780rp_devices[] __initdata = { &m66596_usb_host_device, &cf_ide_device, + &heartbeat_device, }; static int __init r7780rp_devices_setup(void) @@ -148,7 +176,7 @@ static void __init r7780rp_setup(char **cmdline_p) #ifndef CONFIG_SH_R7780MP ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */ #endif - ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x0100, PA_IVDRCTL); /* Si13112 */ + ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */ pm_power_off = r7780rp_power_off; } @@ -185,8 +213,5 @@ struct sh_machine_vector mv_r7780rp __initmv = { .mv_ioport_map = r7780rp_ioport_map, .mv_init_irq = init_r7780rp_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_r7780rp, -#endif }; ALIAS_MV(r7780rp) diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/renesas/rts7751r2d/Makefile index 686fc9ea598..0d4c75a72be 100644 --- a/arch/sh/boards/renesas/rts7751r2d/Makefile +++ b/arch/sh/boards/renesas/rts7751r2d/Makefile @@ -2,5 +2,4 @@ # Makefile for the RTS7751R2D specific parts of the kernel # -obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o +obj-y := setup.o irq.o diff --git a/arch/sh/boards/renesas/rts7751r2d/io.c b/arch/sh/boards/renesas/rts7751r2d/io.c deleted file mode 100644 index f2507a80497..00000000000 --- a/arch/sh/boards/renesas/rts7751r2d/io.c +++ /dev/null @@ -1,302 +0,0 @@ -/* - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * I/O routine for Renesas Technology sales RTS7751R2D. - * - * Initial version only to support LAN access; some - * placeholder code from io_rts7751r2d.c left in with the - * expectation of later SuperIO and PCMCIA access. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/io.h> -#include <asm/rts7751r2d.h> -#include <asm/addrspace.h> - -/* - * The 7751R RTS7751R2D uses the built-in PCI controller (PCIC) - * of the 7751R processor, and has a SuperIO accessible via the PCI. - * The board also includes a PCMCIA controller on its memory bus, - * like the other Solution Engine boards. - */ - -static inline unsigned long port2adr(unsigned int port) -{ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - if (port == 0x3f6) - return (PA_AREA5_IO + 0x80c); - else - return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1)); - else - maybebadio((unsigned long)port); - - return port; -} - -static inline unsigned long port88796l(unsigned int port, int flag) -{ - unsigned long addr; - - if (flag) - addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1); - else - addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1) + 0x1000; - - return addr; -} - -/* The 7751R RTS7751R2D seems to have everything hooked */ -/* up pretty normally (nothing on high-bytes only...) so this */ -/* shouldn't be needed */ -static inline int shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} - -#if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE) -#define CHECK_AX88796L_PORT(port) \ - ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20))) -#else -#define CHECK_AX88796L_PORT(port) (0) -#endif - -/* - * General outline: remap really low stuff [eventually] to SuperIO, - * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) - * is mapped through the PCI IO window. Stuff with high bits (PXSEG) - * should be way beyond the window, and is used w/o translation for - * compatibility. - */ -unsigned char rts7751r2d_inb(unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - return (*(volatile unsigned short *)port88796l(port, 0)) & 0xff; - else if (PXSEG(port)) - return *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - return *(volatile unsigned char *)pci_ioaddr(port); - else - return (*(volatile unsigned short *)port2adr(port) & 0xff); -} - -unsigned char rts7751r2d_inb_p(unsigned long port) -{ - unsigned char v; - - if (CHECK_AX88796L_PORT(port)) - v = (*(volatile unsigned short *)port88796l(port, 0)) & 0xff; - else if (PXSEG(port)) - v = *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - v = *(volatile unsigned char *)pci_ioaddr(port); - else - v = (*(volatile unsigned short *)port2adr(port) & 0xff); - - ctrl_delay(); - - return v; -} - -unsigned short rts7751r2d_inw(unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - return *(volatile unsigned short *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - return *(volatile unsigned short *)pci_ioaddr(port); - else - maybebadio(port); - - return 0; -} - -unsigned int rts7751r2d_inl(unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - return *(volatile unsigned long *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - return *(volatile unsigned long *)pci_ioaddr(port); - else - maybebadio(port); - - return 0; -} - -void rts7751r2d_outb(unsigned char value, unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - *((volatile unsigned short *)port88796l(port, 0)) = value; - else if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port) || shifted_port(port)) - *(volatile unsigned char *)pci_ioaddr(port) = value; - else - *(volatile unsigned short *)port2adr(port) = value; -} - -void rts7751r2d_outb_p(unsigned char value, unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - *((volatile unsigned short *)port88796l(port, 0)) = value; - else if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port) || shifted_port(port)) - *(volatile unsigned char *)pci_ioaddr(port) = value; - else - *(volatile unsigned short *)port2adr(port) = value; - - ctrl_delay(); -} - -void rts7751r2d_outw(unsigned short value, unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - *(volatile unsigned short *)port = value; - else if (is_pci_ioaddr(port) || shifted_port(port)) - *(volatile unsigned short *)pci_ioaddr(port) = value; - else - maybebadio(port); -} - -void rts7751r2d_outl(unsigned int value, unsigned long port) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (PXSEG(port)) - *(volatile unsigned long *)port = value; - else if (is_pci_ioaddr(port) || shifted_port(port)) - *(volatile unsigned long *)pci_ioaddr(port) = value; - else - maybebadio(port); -} - -void rts7751r2d_insb(unsigned long port, void *addr, unsigned long count) -{ - unsigned long a = (unsigned long)addr; - volatile __u8 *bp; - volatile __u16 *p; - - if (CHECK_AX88796L_PORT(port)) { - p = (volatile unsigned short *)port88796l(port, 0); - while (count--) - ctrl_outb(*p & 0xff, a++); - } else if (PXSEG(port)) - while (count--) - ctrl_outb(ctrl_inb(port), a++); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - bp = (__u8 *)pci_ioaddr(port); - while (count--) - ctrl_outb(*bp, a++); - } else { - p = (volatile unsigned short *)port2adr(port); - while (count--) - ctrl_outb(*p & 0xff, a++); - } -} - -void rts7751r2d_insw(unsigned long port, void *addr, unsigned long count) -{ - unsigned long a = (unsigned long)addr; - volatile __u16 *p; - - if (CHECK_AX88796L_PORT(port)) - p = (volatile unsigned short *)port88796l(port, 1); - else if (PXSEG(port)) - p = (volatile unsigned short *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - p = (volatile unsigned short *)pci_ioaddr(port); - else - p = (volatile unsigned short *)port2adr(port); - while (count--) - ctrl_outw(*p, a++); -} - -void rts7751r2d_insl(unsigned long port, void *addr, unsigned long count) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - unsigned long a = (unsigned long)addr; - - while (count--) { - ctrl_outl(ctrl_inl(pci_ioaddr(port)), a); - a += 4; - } - } else - maybebadio(port); -} - -void rts7751r2d_outsb(unsigned long port, const void *addr, unsigned long count) -{ - unsigned long a = (unsigned long)addr; - volatile __u8 *bp; - volatile __u16 *p; - - if (CHECK_AX88796L_PORT(port)) { - p = (volatile unsigned short *)port88796l(port, 0); - while (count--) - *p = ctrl_inb(a++); - } else if (PXSEG(port)) - while (count--) - ctrl_outb(a++, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - bp = (__u8 *)pci_ioaddr(port); - while (count--) - *bp = ctrl_inb(a++); - } else { - p = (volatile unsigned short *)port2adr(port); - while (count--) - *p = ctrl_inb(a++); - } -} - -void rts7751r2d_outsw(unsigned long port, const void *addr, unsigned long count) -{ - unsigned long a = (unsigned long)addr; - volatile __u16 *p; - - if (CHECK_AX88796L_PORT(port)) - p = (volatile unsigned short *)port88796l(port, 1); - else if (PXSEG(port)) - p = (volatile unsigned short *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - p = (volatile unsigned short *)pci_ioaddr(port); - else - p = (volatile unsigned short *)port2adr(port); - - while (count--) { - ctrl_outw(*p, a); - a += 2; - } -} - -void rts7751r2d_outsl(unsigned long port, const void *addr, unsigned long count) -{ - if (CHECK_AX88796L_PORT(port)) - maybebadio(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - unsigned long a = (unsigned long)addr; - - while (count--) { - ctrl_outl(ctrl_inl(a), pci_ioaddr(port)); - a += 4; - } - } else - maybebadio(port); -} - -unsigned long rts7751r2d_isa_port2addr(unsigned long offset) -{ - return port2adr(offset); -} diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c index cb0eb20d1b4..0bae9041ace 100644 --- a/arch/sh/boards/renesas/rts7751r2d/irq.c +++ b/arch/sh/boards/renesas/rts7751r2d/irq.c @@ -9,7 +9,9 @@ * Atom Create Engineering Co., Ltd. 2002. */ #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <asm/rts7751r2d.h> @@ -22,79 +24,31 @@ static int mask_pos[] = {6, 11, 9, 8, 12, 10, 5, 4, 7, 14, 13, 0, 0, 0, 0}; extern int voyagergx_irq_demux(int irq); extern void setup_voyagergx_irq(void); -static void enable_rts7751r2d_irq(unsigned int irq); -static void disable_rts7751r2d_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_rts7751r2d_irq disable_rts7751r2d_irq - -static void ack_rts7751r2d_irq(unsigned int irq); -static void end_rts7751r2d_irq(unsigned int irq); - -static unsigned int startup_rts7751r2d_irq(unsigned int irq) +static void enable_rts7751r2d_irq(unsigned int irq) { - enable_rts7751r2d_irq(irq); - return 0; /* never anything pending */ + /* Set priority in IPR back to original value */ + ctrl_outw(ctrl_inw(IRLCNTR1) | (1 << mask_pos[irq]), IRLCNTR1); } static void disable_rts7751r2d_irq(unsigned int irq) { - unsigned short val; - unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]); - /* Set the priority in IPR to 0 */ - val = ctrl_inw(IRLCNTR1); - val &= mask; - ctrl_outw(val, IRLCNTR1); -} - -static void enable_rts7751r2d_irq(unsigned int irq) -{ - unsigned short val; - unsigned short value = (0x0001 << mask_pos[irq]); - - /* Set priority in IPR back to original value */ - val = ctrl_inw(IRLCNTR1); - val |= value; - ctrl_outw(val, IRLCNTR1); + ctrl_outw(ctrl_inw(IRLCNTR1) & (0xffff ^ (1 << mask_pos[irq])), + IRLCNTR1); } int rts7751r2d_irq_demux(int irq) { - int demux_irq; - - demux_irq = voyagergx_irq_demux(irq); - return demux_irq; -} - -static void ack_rts7751r2d_irq(unsigned int irq) -{ - disable_rts7751r2d_irq(irq); + return voyagergx_irq_demux(irq); } -static void end_rts7751r2d_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_rts7751r2d_irq(irq); -} - -static struct hw_interrupt_type rts7751r2d_irq_type = { - .typename = "RTS7751R2D IRQ", - .startup = startup_rts7751r2d_irq, - .shutdown = shutdown_rts7751r2d_irq, - .enable = enable_rts7751r2d_irq, - .disable = disable_rts7751r2d_irq, - .ack = ack_rts7751r2d_irq, - .end = end_rts7751r2d_irq, +static struct irq_chip rts7751r2d_irq_chip __read_mostly = { + .name = "rts7751r2d", + .mask = disable_rts7751r2d_irq, + .unmask = enable_rts7751r2d_irq, + .mask_ack = disable_rts7751r2d_irq, }; -static void make_rts7751r2d_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &rts7751r2d_irq_type; - disable_rts7751r2d_irq(irq); -} - /* * Initialize IRQ setting */ @@ -119,8 +73,12 @@ void __init init_rts7751r2d_IRQ(void) * IRL14=Extention #3 */ - for (i=0; i<15; i++) - make_rts7751r2d_irq(i); + for (i=0; i<15; i++) { + disable_irq_nosync(i); + set_irq_chip_and_handler_name(i, &rts7751r2d_irq_chip, + handle_level_irq, "level"); + enable_rts7751r2d_irq(i); + } setup_voyagergx_irq(); } diff --git a/arch/sh/boards/renesas/rts7751r2d/led.c b/arch/sh/boards/renesas/rts7751r2d/led.c deleted file mode 100644 index 509f548bdce..00000000000 --- a/arch/sh/boards/renesas/rts7751r2d/led.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * linux/arch/sh/boards/renesas/rts7751r2d/led.c - * - * Copyright (C) Atom Create Engineering Co., Ltd. - * - * May be copied or modified under the terms of GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Renesas Technology Sales RTS7751R2D specific LED code. - */ -#include <linux/io.h> -#include <linux/sched.h> -#include <asm/rts7751r2d.h> - -/* Cycle the LED's in the clasic Knightriger/Sun pattern */ -void heartbeat_rts7751r2d(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *)PA_OUTPORT; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) - return; - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110 - */ - period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3<<FSHIFT))); - - *p = 1 << bit; - if (up) - if (bit == 7) { - bit--; - up = 0; - } else - bit++; - else if (bit == 0) - up = 1; - else - bit--; -} diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index 5c042d35ec9..44b42082a0a 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -1,8 +1,8 @@ /* * Renesas Technology Sales RTS7751R2D Support. * - * Copyright (C) 2002 Atom Create Engineering Co., Ltd. - * Copyright (C) 2004 - 2006 Paul Mundt + * Copyright (C) 2002 - 2006 Atom Create Engineering Co., Ltd. + * Copyright (C) 2004 - 2007 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -10,33 +10,13 @@ */ #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/pata_platform.h> #include <linux/serial_8250.h> #include <linux/pm.h> #include <asm/machvec.h> -#include <asm/mach/rts7751r2d.h> -#include <asm/io.h> +#include <asm/rts7751r2d.h> #include <asm/voyagergx.h> - -extern void heartbeat_rts7751r2d(void); -extern void init_rts7751r2d_IRQ(void); -extern int rts7751r2d_irq_demux(int irq); - -extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t); -extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t); - -static struct plat_serial8250_port uart_platform_data[] = { - { - .membase = (void *)VOYAGER_UART_BASE, - .mapbase = VOYAGER_UART_BASE, - .iotype = UPIO_MEM, - .irq = VOYAGER_UART0_IRQ, - .flags = UPF_BOOT_AUTOCONF, - .regshift = 2, - .uartclk = (9600 * 16), - }, { - .flags = 0, - }, -}; +#include <asm/io.h> static void __init voyagergx_serial_init(void) { @@ -45,32 +25,96 @@ static void __init voyagergx_serial_init(void) /* * GPIO Control */ - val = inl(GPIO_MUX_HIGH); + val = readl((void __iomem *)GPIO_MUX_HIGH); val |= 0x00001fe0; - outl(val, GPIO_MUX_HIGH); + writel(val, (void __iomem *)GPIO_MUX_HIGH); /* * Power Mode Gate */ - val = inl(POWER_MODE0_GATE); + val = readl((void __iomem *)POWER_MODE0_GATE); val |= (POWER_MODE0_GATE_U0 | POWER_MODE0_GATE_U1); - outl(val, POWER_MODE0_GATE); + writel(val, (void __iomem *)POWER_MODE0_GATE); - val = inl(POWER_MODE1_GATE); + val = readl((void __iomem *)POWER_MODE1_GATE); val |= (POWER_MODE1_GATE_U0 | POWER_MODE1_GATE_U1); - outl(val, POWER_MODE1_GATE); + writel(val, (void __iomem *)POWER_MODE1_GATE); } +static struct resource cf_ide_resources[] = { + [0] = { + .start = PA_AREA5_IO + 0x1000, + .end = PA_AREA5_IO + 0x1000 + 0x08 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PA_AREA5_IO + 0x80c, + .end = PA_AREA5_IO + 0x80c + 0x16 - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { +#ifdef CONFIG_RTS7751R2D_REV11 + .start = 1, +#else + .start = 2, +#endif + .flags = IORESOURCE_IRQ, + }, +}; + +static struct pata_platform_info pata_info = { + .ioport_shift = 1, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, + .dev = { + .platform_data = &pata_info, + }, +}; + +static struct plat_serial8250_port uart_platform_data[] = { + { + .membase = (void __iomem *)VOYAGER_UART_BASE, + .mapbase = VOYAGER_UART_BASE, + .iotype = UPIO_MEM, + .irq = VOYAGER_UART0_IRQ, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .regshift = 2, + .uartclk = (9600 * 16), + } +}; + static struct platform_device uart_device = { .name = "serial8250", - .id = -1, + .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = uart_platform_data, }, }; +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_OUTPORT, + .end = PA_OUTPORT + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + static struct platform_device *rts7751r2d_devices[] __initdata = { &uart_device, + &heartbeat_device, + &cf_ide_device, }; static int __init rts7751r2d_devices_setup(void) @@ -78,6 +122,7 @@ static int __init rts7751r2d_devices_setup(void) return platform_add_devices(rts7751r2d_devices, ARRAY_SIZE(rts7751r2d_devices)); } +__initcall(rts7751r2d_devices_setup); static void rts7751r2d_power_off(void) { @@ -89,14 +134,17 @@ static void rts7751r2d_power_off(void) */ static void __init rts7751r2d_setup(char **cmdline_p) { - device_initcall(rts7751r2d_devices_setup); + u16 ver = ctrl_inw(PA_VERREG); + + printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); + + printk(KERN_INFO "FPGA version:%d (revision:%d)\n", + (ver >> 4) & 0xf, ver & 0xf); ctrl_outw(0x0000, PA_OUTPORT); pm_power_off = rts7751r2d_power_off; voyagergx_serial_init(); - - printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); } /* @@ -107,31 +155,7 @@ struct sh_machine_vector mv_rts7751r2d __initmv = { .mv_setup = rts7751r2d_setup, .mv_nr_irqs = 72, - .mv_inb = rts7751r2d_inb, - .mv_inw = rts7751r2d_inw, - .mv_inl = rts7751r2d_inl, - .mv_outb = rts7751r2d_outb, - .mv_outw = rts7751r2d_outw, - .mv_outl = rts7751r2d_outl, - - .mv_inb_p = rts7751r2d_inb_p, - .mv_inw_p = rts7751r2d_inw, - .mv_inl_p = rts7751r2d_inl, - .mv_outb_p = rts7751r2d_outb_p, - .mv_outw_p = rts7751r2d_outw, - .mv_outl_p = rts7751r2d_outl, - - .mv_insb = rts7751r2d_insb, - .mv_insw = rts7751r2d_insw, - .mv_insl = rts7751r2d_insl, - .mv_outsb = rts7751r2d_outsb, - .mv_outsw = rts7751r2d_outsw, - .mv_outsl = rts7751r2d_outsl, - .mv_init_irq = init_rts7751r2d_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_rts7751r2d, -#endif .mv_irq_demux = rts7751r2d_irq_demux, #ifdef CONFIG_USB_SM501 diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/se/7206/Makefile index 63950f4f245..63e7ed699f3 100644 --- a/arch/sh/boards/se/7206/Makefile +++ b/arch/sh/boards/se/7206/Makefile @@ -3,5 +3,3 @@ # obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o - diff --git a/arch/sh/boards/se/7206/led.c b/arch/sh/boards/se/7206/led.c deleted file mode 100644 index ef794601ab8..00000000000 --- a/arch/sh/boards/se/7206/led.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/arch/sh/kernel/led_se.c - * - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include <linux/config.h> -#include <asm/se7206.h> - -#ifdef CONFIG_HEARTBEAT - -#include <linux/sched.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300<<FSHIFT)/ - ((avenrun[0]/5) + (3<<FSHIFT)) ); - - if (up) { - if (bit == 7) { - bit--; - up=0; - } else { - bit ++; - } - } else { - if (bit == 0) { - bit++; - up=1; - } else { - bit--; - } - } - *p = 1<<(bit+8); - -} -#endif /* CONFIG_HEARTBEAT */ diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c index 0f42e91a323..ca714879f55 100644 --- a/arch/sh/boards/se/7206/setup.c +++ b/arch/sh/boards/se/7206/setup.c @@ -3,6 +3,7 @@ * linux/arch/sh/boards/se/7206/setup.c * * Copyright (C) 2006 Yoshinori Sato + * Copyright (C) 2007 Paul Mundt * * Hitachi 7206 SolutionEngine Support. * @@ -34,15 +35,37 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se7206_devices[] __initdata = { + &smc91x_device, + &heartbeat_device, +}; + static int __init se7206_devices_setup(void) { - return platform_device_register(&smc91x_device); + return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices)); } - __initcall(se7206_devices_setup); -void heartbeat_se(void); - /* * The Machine Vector */ @@ -72,8 +95,5 @@ struct sh_machine_vector mv_se __initmv = { .mv_outsl = se7206_outsl, .mv_init_irq = init_se7206_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_se, -#endif }; ALIAS_MV(se) diff --git a/arch/sh/boards/se/7300/Makefile b/arch/sh/boards/se/7300/Makefile index 0fbd4f47815..46247368f14 100644 --- a/arch/sh/boards/se/7300/Makefile +++ b/arch/sh/boards/se/7300/Makefile @@ -3,5 +3,3 @@ # obj-y := setup.o io.o irq.o - -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7300/led.c b/arch/sh/boards/se/7300/led.c deleted file mode 100644 index 4d03bb7774b..00000000000 --- a/arch/sh/boards/se/7300/led.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/arch/sh/boards/se/7300/led.c - * - * Derived from linux/arch/sh/boards/se/770x/led.c - * - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include <linux/sched.h> -#include <asm/se7300.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_7300se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); - - if (up) { - if (bit == 7) { - bit--; - up = 0; - } else { - bit++; - } - } else { - if (bit == 0) { - bit++; - up = 1; - } else { - bit--; - } - } - *p = 1 << (bit + 8); - -} - diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c index 6f082a722d4..f1960956bad 100644 --- a/arch/sh/boards/se/7300/setup.c +++ b/arch/sh/boards/se/7300/setup.c @@ -6,14 +6,43 @@ * SH-Mobile SolutionEngine 7300 Support. * */ - #include <linux/init.h> +#include <linux/platform_device.h> #include <asm/machvec.h> #include <asm/se7300.h> -void heartbeat_7300se(void); void init_7300se_IRQ(void); +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se7300_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init se7300_devices_setup(void) +{ + return platform_add_devices(se7300_devices, ARRAY_SIZE(se7300_devices)); +} +__initcall(se7300_devices_setup); + /* * The Machine Vector */ @@ -42,8 +71,5 @@ struct sh_machine_vector mv_7300se __initmv = { .mv_outsl = sh7300se_outsl, .mv_init_irq = init_7300se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7300se, -#endif }; ALIAS_MV(7300se) diff --git a/arch/sh/boards/se/73180/Makefile b/arch/sh/boards/se/73180/Makefile index 8f63886a0f3..e7c09967c52 100644 --- a/arch/sh/boards/se/73180/Makefile +++ b/arch/sh/boards/se/73180/Makefile @@ -3,5 +3,3 @@ # obj-y := setup.o io.o irq.o - -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/73180/led.c b/arch/sh/boards/se/73180/led.c deleted file mode 100644 index 4b72e9a3ead..00000000000 --- a/arch/sh/boards/se/73180/led.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/sh/boards/se/73180/led.c - * - * Derived from arch/sh/boards/se/770x/led.c - * - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include <linux/sched.h> -#include <asm/mach/se73180.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_73180se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); - - if (up) { - if (bit == 7) { - bit--; - up = 0; - } else { - bit++; - } - } else { - if (bit == 0) { - bit++; - up = 1; - } else { - bit--; - } - } - *p = 1 << (bit + LED_SHIFT); - -} diff --git a/arch/sh/boards/se/73180/setup.c b/arch/sh/boards/se/73180/setup.c index b38ef50a160..911ce1cdbd7 100644 --- a/arch/sh/boards/se/73180/setup.c +++ b/arch/sh/boards/se/73180/setup.c @@ -10,13 +10,39 @@ */ #include <linux/init.h> +#include <linux/platform_device.h> #include <asm/machvec.h> #include <asm/se73180.h> #include <asm/irq.h> -void heartbeat_73180se(void); void init_73180se_IRQ(void); +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se73180_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init se73180_devices_setup(void) +{ + return platform_add_devices(sh7343se_platform_devices, + ARRAY_SIZE(sh7343se_platform_devices)); +} +__initcall(se73180_devices_setup); + /* * The Machine Vector */ @@ -46,8 +72,5 @@ struct sh_machine_vector mv_73180se __initmv = { .mv_init_irq = init_73180se_IRQ, .mv_irq_demux = shmse_irq_demux, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_73180se, -#endif }; ALIAS_MV(73180se) diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/se/7343/Makefile index 4291069c0b4..3024796c620 100644 --- a/arch/sh/boards/se/7343/Makefile +++ b/arch/sh/boards/se/7343/Makefile @@ -3,5 +3,3 @@ # obj-y := setup.o io.o irq.o - -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7343/led.c b/arch/sh/boards/se/7343/led.c deleted file mode 100644 index 6b39e191c42..00000000000 --- a/arch/sh/boards/se/7343/led.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * arch/sh/boards/se/7343/led.c - * - */ -#include <linux/sched.h> -#include <asm/mach/se7343.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_7343se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short *p = (volatile unsigned short *) PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT))); - - if (up) { - if (bit == 7) { - bit--; - up = 0; - } else { - bit++; - } - } else { - if (bit == 0) { - bit++; - up = 1; - } else { - bit--; - } - } - *p = 1 << (bit + LED_SHIFT); - -} diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index c7d17fe7764..3fdb16f2cef 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -4,7 +4,6 @@ #include <asm/mach/se7343.h> #include <asm/irq.h> -void heartbeat_7343se(void); void init_7343se_IRQ(void); static struct resource smc91x_resources[] = { @@ -31,14 +30,30 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; -static struct platform_device *smc91x_platform_devices[] __initdata = { +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *sh7343se_platform_devices[] __initdata = { &smc91x_device, + &heartbeat_device, }; static int __init sh7343se_devices_setup(void) { - return platform_add_devices(smc91x_platform_devices, - ARRAY_SIZE(smc91x_platform_devices)); + return platform_add_devices(sh7343se_platform_devices, + ARRAY_SIZE(sh7343se_platform_devices)); } static void __init sh7343se_setup(char **cmdline_p) @@ -76,8 +91,5 @@ struct sh_machine_vector mv_7343se __initmv = { .mv_init_irq = init_7343se_IRQ, .mv_irq_demux = shmse_irq_demux, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7343se, -#endif }; ALIAS_MV(7343se) diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/se/770x/Makefile index 9a5035f80ec..8e624b06d5e 100644 --- a/arch/sh/boards/se/770x/Makefile +++ b/arch/sh/boards/se/770x/Makefile @@ -3,4 +3,3 @@ # obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c index fcd7cd7fa05..307ca5da623 100644 --- a/arch/sh/boards/se/770x/irq.c +++ b/arch/sh/boards/se/770x/irq.c @@ -2,56 +2,96 @@ * linux/arch/sh/boards/se/770x/irq.c * * Copyright (C) 2000 Kazumoto Kojima + * Copyright (C) 2006 Nobuhiro Iwamatsu * * Hitachi SolutionEngine Support. * */ #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/irq.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/se.h> +/* + * If the problem of make_ipr_irq is solved, + * this code will become unnecessary. :-) + */ +static void se770x_disable_ipr_irq(unsigned int irq) +{ + struct ipr_data *p = get_irq_chip_data(irq); + + ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr); +} + +static void se770x_enable_ipr_irq(unsigned int irq) +{ + struct ipr_data *p = get_irq_chip_data(irq); + + ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr); +} + +static struct irq_chip se770x_irq_chip = { + .name = "MS770xSE-FPGA", + .mask = se770x_disable_ipr_irq, + .unmask = se770x_enable_ipr_irq, + .mask_ack = se770x_disable_ipr_irq, +}; + +void make_se770x_irq(struct ipr_data *table, unsigned int nr_irqs) +{ + int i; + + for (i = 0; i < nr_irqs; i++) { + unsigned int irq = table[i].irq; + disable_irq_nosync(irq); + set_irq_chip_and_handler_name(irq, &se770x_irq_chip, + handle_level_irq, "level"); + set_irq_chip_data(irq, &table[i]); + se770x_enable_ipr_irq(irq); + } +} + static struct ipr_data se770x_ipr_map[] = { #if defined(CONFIG_CPU_SUBTYPE_SH7705) /* This is default value */ - { 0xf-0x2, BCR_ILCRA, 2, 0x2 }, - { 0xf-0xa, BCR_ILCRA, 1, 0xa }, - { 0xf-0x5, BCR_ILCRB, 0, 0x5 }, - { 0xf-0x8, BCR_ILCRC, 1, 0x8 }, - { 0xf-0xc, BCR_ILCRC, 0, 0xc }, - { 0xf-0xe, BCR_ILCRD, 3, 0xe }, - { 0xf-0x3, BCR_ILCRD, 1, 0x3 }, /* LAN */ - { 0xf-0xd, BCR_ILCRE, 2, 0xd }, - { 0xf-0x9, BCR_ILCRE, 1, 0x9 }, - { 0xf-0x1, BCR_ILCRE, 0, 0x1 }, - { 0xf-0xf, BCR_ILCRF, 3, 0xf }, - { 0xf-0xb, BCR_ILCRF, 1, 0xb }, - { 0xf-0x7, BCR_ILCRG, 3, 0x7 }, - { 0xf-0x6, BCR_ILCRG, 2, 0x6 }, - { 0xf-0x4, BCR_ILCRG, 1, 0x4 }, + { 0xf-0x2, 0, 8, 0x2 , BCR_ILCRA}, + { 0xf-0xa, 0, 4, 0xa , BCR_ILCRA}, + { 0xf-0x5, 0, 0, 0x5 , BCR_ILCRB}, + { 0xf-0x8, 0, 4, 0x8 , BCR_ILCRC}, + { 0xf-0xc, 0, 0, 0xc , BCR_ILCRC}, + { 0xf-0xe, 0, 12, 0xe , BCR_ILCRD}, + { 0xf-0x3, 0, 4, 0x3 , BCR_ILCRD}, /* LAN */ + { 0xf-0xd, 0, 8, 0xd , BCR_ILCRE}, + { 0xf-0x9, 0, 4, 0x9 , BCR_ILCRE}, + { 0xf-0x1, 0, 0, 0x1 , BCR_ILCRE}, + { 0xf-0xf, 0, 12, 0xf , BCR_ILCRF}, + { 0xf-0xb, 0, 4, 0xb , BCR_ILCRF}, + { 0xf-0x7, 0, 12, 0x7 , BCR_ILCRG}, + { 0xf-0x6, 0, 8, 0x6 , BCR_ILCRG}, + { 0xf-0x4, 0, 4, 0x4 , BCR_ILCRG}, #else - { 14, BCR_ILCRA, 2, 0x0f-14 }, - { 12, BCR_ILCRA, 1, 0x0f-12 }, - { 8, BCR_ILCRB, 1, 0x0f- 8 }, - { 6, BCR_ILCRC, 3, 0x0f- 6 }, - { 5, BCR_ILCRC, 2, 0x0f- 5 }, - { 4, BCR_ILCRC, 1, 0x0f- 4 }, - { 3, BCR_ILCRC, 0, 0x0f- 3 }, - { 1, BCR_ILCRD, 3, 0x0f- 1 }, - - { 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */ - - { 0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */ - { 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */ - { 9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */ - { 7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */ - + { 14, 0, 8, 0x0f-14 ,BCR_ILCRA}, + { 12, 0, 4, 0x0f-12 ,BCR_ILCRA}, + { 8, 0, 4, 0x0f- 8 ,BCR_ILCRB}, + { 6, 0, 12, 0x0f- 6 ,BCR_ILCRC}, + { 5, 0, 8, 0x0f- 5 ,BCR_ILCRC}, + { 4, 0, 4, 0x0f- 4 ,BCR_ILCRC}, + { 3, 0, 0, 0x0f- 3 ,BCR_ILCRC}, + { 1, 0, 12, 0x0f- 1 ,BCR_ILCRD}, + /* ST NIC */ + { 10, 0, 4, 0x0f-10 ,BCR_ILCRD}, /* LAN */ + /* MRSHPC IRQs setting */ + { 0, 0, 12, 0x0f- 0 ,BCR_ILCRE}, /* PCIRQ3 */ + { 11, 0, 8, 0x0f-11 ,BCR_ILCRE}, /* PCIRQ2 */ + { 9, 0, 4, 0x0f- 9 ,BCR_ILCRE}, /* PCIRQ1 */ + { 7, 0, 0, 0x0f- 7 ,BCR_ILCRE}, /* PCIRQ0 */ /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ /* NOTE: #2 and #13 are not used on PC */ - { 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */ - { 2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */ + { 13, 0, 4, 0x0f-13 ,BCR_ILCRG}, /* SLOTIRQ2 */ + { 2, 0, 0, 0x0f- 2 ,BCR_ILCRG}, /* SLOTIRQ1 */ #endif }; @@ -81,5 +121,5 @@ void __init init_se_IRQ(void) ctrl_outw(0, BCR_ILCRF); ctrl_outw(0, BCR_ILCRG); #endif - make_ipr_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map)); + make_se770x_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map)); } diff --git a/arch/sh/boards/se/770x/led.c b/arch/sh/boards/se/770x/led.c deleted file mode 100644 index d93dd831b2a..00000000000 --- a/arch/sh/boards/se/770x/led.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/arch/sh/boards/se/770x/led.c - * - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ - -#include <linux/sched.h> -#include <asm/se.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300<<FSHIFT)/ - ((avenrun[0]/5) + (3<<FSHIFT)) ); - - if (up) { - if (bit == 7) { - bit--; - up=0; - } else { - bit ++; - } - } else { - if (bit == 0) { - bit++; - up=1; - } else { - bit--; - } - } - *p = 1<<(bit+8); - -} diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index a1d51d5fa92..45cbc36b9fb 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -1,5 +1,4 @@ -/* $Id: setup.c,v 1.1.2.4 2002/03/02 21:57:07 lethal Exp $ - * +/* * linux/arch/sh/boards/se/770x/setup.c * * Copyright (C) 2000 Kazumoto Kojima @@ -8,12 +7,12 @@ * */ #include <linux/init.h> +#include <linux/platform_device.h> #include <asm/machvec.h> #include <asm/se.h> #include <asm/io.h> #include <asm/smc37c93x.h> -void heartbeat_se(void); void init_se_IRQ(void); /* @@ -36,11 +35,6 @@ static void __init smsc_setup(char **cmdline_p) smsc_config(ACTIVATE_INDEX, 0x01); smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */ - /* IDE1 */ - smsc_config(CURRENT_LDN_INDEX, LDN_IDE1); - smsc_config(ACTIVATE_INDEX, 0x01); - smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */ - /* AUXIO (GPIO): to use IDE1 */ smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO); smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */ @@ -69,6 +63,36 @@ static void __init smsc_setup(char **cmdline_p) outb_p(CONFIG_EXIT, CONFIG_PORT); } +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init se_devices_setup(void) +{ + return platform_add_devices(se_devices, ARRAY_SIZE(se_devices)); +} +__initcall(se_devices_setup); + /* * The Machine Vector */ @@ -107,8 +131,5 @@ struct sh_machine_vector mv_se __initmv = { .mv_outsl = se_outsl, .mv_init_irq = init_se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_se, -#endif }; ALIAS_MV(se) diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/se/7751/Makefile index 188900c4832..dbc29f3a9de 100644 --- a/arch/sh/boards/se/7751/Makefile +++ b/arch/sh/boards/se/7751/Makefile @@ -5,4 +5,3 @@ obj-y := setup.o io.o irq.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/se/7751/led.c b/arch/sh/boards/se/7751/led.c deleted file mode 100644 index de4194d97c8..00000000000 --- a/arch/sh/boards/se/7751/led.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * linux/arch/sh/boards/se/7751/led.c - * - * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * This file contains Solution Engine specific LED code. - */ -#include <linux/sched.h> -#include <asm/se7751.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_7751se(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned short* p = (volatile unsigned short*)PA_LED; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300<<FSHIFT)/ - ((avenrun[0]/5) + (3<<FSHIFT)) ); - - if (up) { - if (bit == 7) { - bit--; - up=0; - } else { - bit ++; - } - } else { - if (bit == 0) { - bit++; - up=1; - } else { - bit--; - } - } - *p = 1<<(bit+8); - -} diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c index f7e1dd39c83..e3feae6ec0b 100644 --- a/arch/sh/boards/se/7751/setup.c +++ b/arch/sh/boards/se/7751/setup.c @@ -9,11 +9,11 @@ * Ian da Silva and Jeremy Siegel, 2001. */ #include <linux/init.h> +#include <linux/platform_device.h> #include <asm/machvec.h> #include <asm/se7751.h> #include <asm/io.h> -void heartbeat_7751se(void); void init_7751se_IRQ(void); #ifdef CONFIG_SH_KGDB @@ -161,11 +161,40 @@ static int kgdb_uart_setup(void) } #endif /* CONFIG_SH_KGDB */ +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = heartbeat_bit_pos, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *se7751_devices[] __initdata = { + &smc91x_device, + &heartbeat_device, +}; + +static int __init se7751_devices_setup(void) +{ + return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices)); +} +__initcall(se7751_devices_setup); /* * The Machine Vector */ - struct sh_machine_vector mv_7751se __initmv = { .mv_name = "7751 SolutionEngine", .mv_setup = sh7751se_setup, @@ -189,8 +218,5 @@ struct sh_machine_vector mv_7751se __initmv = { .mv_outsl = sh7751se_outsl, .mv_init_irq = init_7751se_IRQ, -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_7751se, -#endif }; ALIAS_MV(7751se) diff --git a/arch/sh/boards/sh03/Makefile b/arch/sh/boards/sh03/Makefile index 321be50e36a..400306a796e 100644 --- a/arch/sh/boards/sh03/Makefile +++ b/arch/sh/boards/sh03/Makefile @@ -3,4 +3,3 @@ # obj-y := setup.o rtc.o -obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/sh03/led.c b/arch/sh/boards/sh03/led.c deleted file mode 100644 index d38562ad6be..00000000000 --- a/arch/sh/boards/sh03/led.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/sh/boards/sh03/led.c - * - * Copyright (C) 2004 Saito.K Interface Corporation. - * - * This file contains Interface CTP/PCI-SH03 specific LED code. - */ - -#include <linux/sched.h> - -/* Cycle the LED's in the clasic Knightrider/Sun pattern */ -void heartbeat_sh03(void) -{ - static unsigned int cnt = 0, period = 0; - volatile unsigned char* p = (volatile unsigned char*)0xa0800000; - static unsigned bit = 0, up = 1; - - cnt += 1; - if (cnt < period) { - return; - } - - cnt = 0; - - /* Go through the points (roughly!): - * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 - */ - period = 110 - ( (300<<FSHIFT)/ - ((avenrun[0]/5) + (3<<FSHIFT)) ); - - if (up) { - if (bit == 7) { - bit--; - up=0; - } else { - bit ++; - } - } else { - if (bit == 0) { - bit++; - up=1; - } else { - bit--; - } - } - *p = 1<<bit; - -} diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c index 5ad1e19771b..c069c444b4e 100644 --- a/arch/sh/boards/sh03/setup.c +++ b/arch/sh/boards/sh03/setup.c @@ -8,6 +8,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/pci.h> +#include <linux/platform_device.h> #include <asm/io.h> #include <asm/rtc.h> #include <asm/sh03/io.h> @@ -48,15 +49,36 @@ static void __init sh03_setup(char **cmdline_p) board_time_init = sh03_time_init; } +static struct resource heartbeat_resources[] = { + [0] = { + .start = 0xa0800000, + .end = 0xa0800000 + 8 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct platform_device *sh03_devices[] __initdata = { + &heartbeat_device, +}; + +static int __init sh03_devices_setup(void) +{ + return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices)); +} +__initcall(sh03_devices_setup); + struct sh_machine_vector mv_sh03 __initmv = { .mv_name = "Interface (CTP/PCI-SH03)", .mv_setup = sh03_setup, .mv_nr_irqs = 48, .mv_ioport_map = sh03_ioport_map, .mv_init_irq = init_sh03_IRQ, - -#ifdef CONFIG_HEARTBEAT - .mv_heartbeat = heartbeat_sh03, -#endif }; ALIAS_MV(sh03) diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c index a31a1d1e268..4a9df4a6b03 100644 --- a/arch/sh/boards/shmin/setup.c +++ b/arch/sh/boards/shmin/setup.c @@ -12,12 +12,22 @@ #include <asm/irq.h> #include <asm/io.h> -#define PFC_PHCR 0xa400010e +#define PFC_PHCR 0xa400010eUL +#define INTC_ICR1 0xa4000010UL +#define INTC_IPRC 0xa4000016UL + +static struct ipr_data shmin_ipr_map[] = { + { .irq=32, .addr=INTC_IPRC, .shift= 0, .priority=0 }, + { .irq=33, .addr=INTC_IPRC, .shift= 4, .priority=0 }, + { .irq=34, .addr=INTC_IPRC, .shift= 8, .priority=8 }, + { .irq=35, .addr=INTC_IPRC, .shift=12, .priority=0 }, +}; static void __init init_shmin_irq(void) { ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active. + make_ipr_irq(shmin_ipr_map, ARRAY_SIZE(shmin_ipr_map)); } static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size) diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c index f7ea700d05a..70f12907647 100644 --- a/arch/sh/cchips/voyagergx/irq.c +++ b/arch/sh/cchips/voyagergx/irq.c @@ -28,21 +28,21 @@ static void disable_voyagergx_irq(unsigned int irq) unsigned long val; unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); - pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask); - val = inl(VOYAGER_INT_MASK); - val &= ~mask; - outl(val, VOYAGER_INT_MASK); + pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask); + val = readl((void __iomem *)VOYAGER_INT_MASK); + val &= ~mask; + writel(val, (void __iomem *)VOYAGER_INT_MASK); } static void enable_voyagergx_irq(unsigned int irq) { - unsigned long val; - unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); + unsigned long val; + unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); - pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask); - val = inl(VOYAGER_INT_MASK); - val |= mask; - outl(val, VOYAGER_INT_MASK); + pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask); + val = readl((void __iomem *)VOYAGER_INT_MASK); + val |= mask; + writel(val, (void __iomem *)VOYAGER_INT_MASK); } static void mask_and_ack_voyagergx(unsigned int irq) @@ -68,20 +68,20 @@ static void shutdown_voyagergx_irq(unsigned int irq) } static struct hw_interrupt_type voyagergx_irq_type = { - .typename = "VOYAGERGX-IRQ", - .startup = startup_voyagergx_irq, - .shutdown = shutdown_voyagergx_irq, - .enable = enable_voyagergx_irq, - .disable = disable_voyagergx_irq, - .ack = mask_and_ack_voyagergx, - .end = end_voyagergx_irq, + .typename = "VOYAGERGX-IRQ", + .startup = startup_voyagergx_irq, + .shutdown = shutdown_voyagergx_irq, + .enable = enable_voyagergx_irq, + .disable = disable_voyagergx_irq, + .ack = mask_and_ack_voyagergx, + .end = end_voyagergx_irq, }; static irqreturn_t voyagergx_interrupt(int irq, void *dev_id) { printk(KERN_INFO "VoyagerGX: spurious interrupt, status: 0x%x\n", - inl(INT_STATUS)); + (unsigned int)readl((void __iomem *)INT_STATUS)); return IRQ_HANDLED; } @@ -93,13 +93,13 @@ static struct { void voyagergx_register_irq_demux(int irq, int (*demux)(int irq, void *dev), void *dev) { - voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = demux; - voyagergx_demux[irq - VOYAGER_IRQ_BASE].dev = dev; + voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = demux; + voyagergx_demux[irq - VOYAGER_IRQ_BASE].dev = dev; } void voyagergx_unregister_irq_demux(int irq) { - voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = 0; + voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = 0; } int voyagergx_irq_demux(int irq) @@ -107,31 +107,25 @@ int voyagergx_irq_demux(int irq) if (irq == IRQ_VOYAGER ) { unsigned long i = 0, bit __attribute__ ((unused)); - unsigned long val = inl(INT_STATUS); -#if 1 - if ( val & ( 1 << 1 )){ + unsigned long val = readl((void __iomem *)INT_STATUS); + + if (val & (1 << 1)) i = 1; - } else if ( val & ( 1 << 2 )){ + else if (val & (1 << 2)) i = 2; - } else if ( val & ( 1 << 6 )){ + else if (val & (1 << 6)) i = 6; - } else if( val & ( 1 << 10 )){ + else if (val & (1 << 10)) i = 10; - } else if( val & ( 1 << 11 )){ + else if (val & (1 << 11)) i = 11; - } else if( val & ( 1 << 12 )){ + else if (val & (1 << 12)) i = 12; - } else if( val & ( 1 << 17 )){ + else if (val & (1 << 17)) i = 17; - } else { + else printk("Unexpected IRQ irq = %d status = 0x%08lx\n", irq, val); - } - pr_debug("voyagergx_irq_demux %ld\n", i); -#else - for (bit = 1, i = 0 ; i < VOYAGER_IRQ_NUM ; bit <<= 1, i++) - if (val & bit) - break; -#endif + pr_debug("voyagergx_irq_demux %d \n", i); if (i < VOYAGER_IRQ_NUM) { irq = VOYAGER_IRQ_BASE + i; if (voyagergx_demux[i].func != 0) diff --git a/arch/sh/cchips/voyagergx/setup.c b/arch/sh/cchips/voyagergx/setup.c index 66b2fedd7ad..33f03027c19 100644 --- a/arch/sh/cchips/voyagergx/setup.c +++ b/arch/sh/cchips/voyagergx/setup.c @@ -19,7 +19,7 @@ static int __init setup_voyagergx(void) { unsigned long val; - val = inl(DRAM_CTRL); + val = readl((void __iomem *)DRAM_CTRL); val |= (DRAM_CTRL_CPU_COLUMN_SIZE_256 | DRAM_CTRL_CPU_ACTIVE_PRECHARGE | DRAM_CTRL_CPU_RESET | @@ -29,7 +29,7 @@ static int __init setup_voyagergx(void) DRAM_CTRL_ACTIVE_PRECHARGE | DRAM_CTRL_RESET | DRAM_CTRL_REMAIN_ACTIVE); - outl(val, DRAM_CTRL); + writel(val, (void __iomem *)DRAM_CTRL); return 0; } diff --git a/arch/sh/configs/rts7751r2d_defconfig b/arch/sh/configs/rts7751r2d_defconfig index 099e98f1472..db6a02df5af 100644 --- a/arch/sh/configs/rts7751r2d_defconfig +++ b/arch/sh/configs/rts7751r2d_defconfig @@ -1,15 +1,21 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:38:36 2006 +# Linux kernel version: 2.6.20 +# Thu Feb 15 17:17:29 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -33,8 +39,8 @@ CONFIG_SYSVIPC=y # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -97,10 +103,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_SH_73180_SOLUTION_ENGINE is not set # CONFIG_SH_7751_SYSTEMH is not set # CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set # CONFIG_SH_SATURN is not set # CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set # CONFIG_SH_MPC1211 is not set # CONFIG_SH_SH03 is not set # CONFIG_SH_SECUREEDGE5410 is not set @@ -113,6 +117,9 @@ CONFIG_SH_RTS7751R2D=y # CONFIG_SH_LANDISK is not set # CONFIG_SH_TITAN is not set # CONFIG_SH_SHMIN is not set +# CONFIG_SH_7206_SOLUTION_ENGINE is not set +# CONFIG_SH_7619_SOLUTION_ENGINE is not set +# CONFIG_SH_ASDAP310 is not set # CONFIG_SH_UNKNOWN is not set # @@ -124,6 +131,12 @@ CONFIG_CPU_SH4=y # SH-2 Processor Support # # CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set + +# +# SH-2A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7206 is not set # # SH-3 Processor Support @@ -159,12 +172,14 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set # # SH4AL-DSP Processor Support # # CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set # # Memory management options @@ -174,6 +189,9 @@ CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_VSYSCALL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -183,6 +201,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 # # Cache configuration @@ -195,11 +214,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y # CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y # # Timer support @@ -210,6 +232,8 @@ CONFIG_SH_TMU=y # RTS7751R2D options # CONFIG_RTS7751R2D_REV11=y +CONFIG_SH_TIMER_IRQ=16 +# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=60000000 # @@ -232,10 +256,16 @@ CONFIG_VOYAGERGX=y CONFIG_HEARTBEAT=y # +# Additional SuperH Device Drivers +# +# CONFIG_PUSH_SWITCH is not set + +# # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_KEXEC is not set @@ -251,7 +281,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00010000 CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="mem=64M console=ttySC0,115200 root=/dev/hda1" +CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" # # Bus options @@ -260,7 +290,6 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set # # PCCARD (PCMCIA/CardBus) support @@ -302,6 +331,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -319,11 +349,13 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -380,7 +412,7 @@ CONFIG_WIRELESS_EXT=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set # @@ -422,44 +454,145 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_ATA_OVER_ETH is not set # -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives +# Misc devices # -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # -# IDE chipset support/bugfixes +# ATA/ATAPI/MFM/RLL support # -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPCI is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers # -# CONFIG_ATA is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +CONFIG_PATA_PLATFORM=y # # Multi-device support (RAID and LVM) @@ -470,6 +603,9 @@ CONFIG_IDE_GENERIC=y # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -540,6 +676,7 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -559,14 +696,17 @@ CONFIG_8139TOO=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set # # Token Ring devices @@ -611,6 +751,7 @@ CONFIG_NET_WIRELESS=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -646,14 +787,23 @@ CONFIG_NET_WIRELESS=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # -# CONFIG_SERIAL_SH_SCI is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=1 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set -# CONFIG_UNIX98_PTYS is not set +CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -671,10 +821,6 @@ CONFIG_HW_RANDOM=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -682,7 +828,6 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -698,6 +843,7 @@ CONFIG_HW_RANDOM=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -706,18 +852,14 @@ CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_HWMON_DEBUG_CHIP is not set # -# Misc devices -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -759,7 +901,6 @@ CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_AC97_CODEC=m -CONFIG_SND_AC97_BUS=m # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set @@ -782,6 +923,18 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -801,6 +954,7 @@ CONFIG_SND_AC97_BUS=m # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set @@ -813,17 +967,22 @@ CONFIG_SND_YMFPCI=m # CONFIG_SND_AC97_POWER_SAVE is not set # +# SoC audio support +# +# CONFIG_SND_SOC is not set + +# # Open Sound System # CONFIG_SOUND_PRIME=m -# CONFIG_OSS_OBSOLETE_DRIVER is not set +# CONFIG_OBSOLETE_OSS is not set # CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set +CONFIG_AC97_BUS=m # # USB support @@ -872,7 +1031,29 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # Real Time Clock # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set # # DMA Engine support @@ -888,16 +1069,26 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # +# Auxiliary Display support +# + +# +# Virtualization +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set @@ -932,7 +1123,8 @@ CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y @@ -1018,6 +1210,11 @@ CONFIG_NLS_CODEPAGE_932=y # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # CONFIG_PROFILING=y @@ -1026,16 +1223,20 @@ CONFIG_OPROFILE=y # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000 +CONFIG_EARLY_PRINTK=y # CONFIG_KGDB is not set # @@ -1052,8 +1253,11 @@ CONFIG_LOG_BUF_SHIFT=14 # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig index 5d357d68b23..4e6e77fa4ce 100644 --- a/arch/sh/configs/se7750_defconfig +++ b/arch/sh/configs/se7750_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:49:01 2006 +# Linux kernel version: 2.6.20-rc2 +# Thu Dec 28 23:15:49 2006 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -10,6 +10,11 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -35,6 +40,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -116,6 +122,8 @@ CONFIG_SH_SOLUTION_ENGINE=y # CONFIG_SH_LANDISK is not set # CONFIG_SH_TITAN is not set # CONFIG_SH_SHMIN is not set +# CONFIG_SH_7206_SOLUTION_ENGINE is not set +# CONFIG_SH_7619_SOLUTION_ENGINE is not set # CONFIG_SH_UNKNOWN is not set # @@ -127,6 +135,12 @@ CONFIG_CPU_SH4=y # SH-2 Processor Support # # CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set + +# +# SH-2A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7206 is not set # # SH-3 Processor Support @@ -162,12 +176,14 @@ CONFIG_CPU_SUBTYPE_SH7750=y # # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set # # SH4AL-DSP Processor Support # # CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set # # Memory management options @@ -177,6 +193,9 @@ CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x02000000 CONFIG_VSYSCALL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -202,17 +221,22 @@ CONFIG_CF_BASE_ADDR=0xb8000000 # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y # CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y # # Timer support # CONFIG_SH_TMU=y -CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_SH_TIMER_IRQ=16 +# CONFIG_NO_IDLE_HZ is not set +CONFIG_SH_PCLK_FREQ=33333333 # # CPU Frequency scaling @@ -231,10 +255,16 @@ CONFIG_SH_PCLK_FREQ=50000000 CONFIG_HEARTBEAT=y # +# Additional SuperH Device Drivers +# +# CONFIG_PUSH_SWITCH is not set + +# # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_KEXEC is not set @@ -249,8 +279,7 @@ CONFIG_PREEMPT_NONE=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_UBC_WAKEUP is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC1,38400 root=/dev/nfs ip=bootp" +# CONFIG_CMDLINE_BOOL is not set # # Bus options @@ -313,11 +342,13 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -480,16 +511,79 @@ CONFIG_MTD_ROM=y # CONFIG_ATA_OVER_ETH is not set # +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# # ATA/ATAPI/MFM/RLL support # -# CONFIG_IDE is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers @@ -633,17 +727,12 @@ CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -659,6 +748,7 @@ CONFIG_HW_RANDOM=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -667,18 +757,14 @@ CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_HWMON_DEBUG_CHIP is not set # -# Misc devices -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -758,14 +844,20 @@ CONFIG_FIRMWARE_EDID=y # # +# Virtualization +# + +# # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -814,7 +906,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -875,6 +966,11 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_NLS is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # # CONFIG_PROFILING is not set @@ -882,14 +978,16 @@ CONFIG_PARTITION_ADVANCED=y # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_KGDB is not set @@ -908,6 +1006,7 @@ CONFIG_LOG_BUF_SHIFT=14 # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC32=y @@ -915,3 +1014,4 @@ CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile index bf18dbfb678..6cb92676c5f 100644 --- a/arch/sh/drivers/Makefile +++ b/arch/sh/drivers/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_PCI) += pci/ obj-$(CONFIG_SH_DMA) += dma/ obj-$(CONFIG_SUPERHYWAY) += superhyway/ obj-$(CONFIG_PUSH_SWITCH) += push-switch.o +obj-$(CONFIG_HEARTBEAT) += heartbeat.o diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index f63721ed86c..06ed0609a95 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -19,34 +19,26 @@ #include <asm/io.h> #include "dma-sh.h" - - -#ifdef CONFIG_CPU_SH4 -static struct ipr_data dmae_ipr_map[] = { - { DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, -}; +static int dmte_irq_map[] = { + DMTE0_IRQ, + DMTE1_IRQ, + DMTE2_IRQ, + DMTE3_IRQ, +#if defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7760) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) + DMTE4_IRQ, + DMTE5_IRQ, + DMTE6_IRQ, + DMTE7_IRQ, #endif -static struct ipr_data dmte_ipr_map[] = { - /* - * Normally we could just do DMTE0_IRQ + chan outright, though in the - * case of the 7751R, the DMTE IRQs for channels > 4 start right above - * the SCIF - */ - { DMTE0_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE0_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE0_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE0_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE4_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE4_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE4_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, - { DMTE4_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, }; static inline unsigned int get_dmte_irq(unsigned int chan) { unsigned int irq = 0; - if (chan < ARRAY_SIZE(dmte_ipr_map)) - irq = dmte_ipr_map[chan].irq; + if (chan < ARRAY_SIZE(dmte_irq_map)) + irq = dmte_irq_map[chan]; return irq; } @@ -103,7 +95,7 @@ static void sh_dmac_free_dma(struct dma_channel *chan) free_irq(get_dmte_irq(chan->chan), chan); } -static void +static int sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr) { if (!chcr) @@ -119,6 +111,7 @@ sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr) ctrl_outl(chcr, CHCR[chan->chan]); chan->flags |= DMA_CONFIGURED; + return 0; } static void sh_dmac_enable_dma(struct dma_channel *chan) @@ -262,17 +255,11 @@ static int __init sh_dmac_init(void) int i; #ifdef CONFIG_CPU_SH4 - make_ipr_irq(dmae_ipr_map, ARRAY_SIZE(dmae_ipr_map)); i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0); if (unlikely(i < 0)) return i; #endif - i = info->nr_channels; - if (i > ARRAY_SIZE(dmte_ipr_map)) - i = ARRAY_SIZE(dmte_ipr_map); - make_ipr_irq(dmte_ipr_map, i); - /* * Initialize DMAOR, and clean up any error flags that may have * been set. diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c new file mode 100644 index 00000000000..bc59cb6cd78 --- /dev/null +++ b/arch/sh/drivers/heartbeat.c @@ -0,0 +1,132 @@ +/* + * Generic heartbeat driver for regular LED banks + * + * Copyright (C) 2007 Paul Mundt + * + * Most SH reference boards include a number of individual LEDs that can + * be independently controlled (either via a pre-defined hardware + * function or via the LED class, if desired -- the hardware tends to + * encapsulate some of the same "triggers" that the LED class supports, + * so there's not too much value in it). + * + * Additionally, most of these boards also have a LED bank that we've + * traditionally used for strobing the load average. This use case is + * handled by this driver, rather than giving each LED bit position its + * own struct device. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/timer.h> +#include <linux/io.h> + +#define DRV_NAME "heartbeat" +#define DRV_VERSION "0.1.0" + +struct heartbeat_data { + void __iomem *base; + unsigned char bit_pos[8]; + struct timer_list timer; +}; + +static void heartbeat_timer(unsigned long data) +{ + struct heartbeat_data *hd = (struct heartbeat_data *)data; + static unsigned bit = 0, up = 1; + + ctrl_outw(1 << hd->bit_pos[bit], (unsigned long)hd->base); + if (up) + if (bit == (ARRAY_SIZE(hd->bit_pos) - 1)) { + bit--; + up = 0; + } else + bit++; + else if (bit == 0) + up = 1; + else + bit--; + + mod_timer(&hd->timer, jiffies + (110 - ((300 << FSHIFT) / + ((avenrun[0] / 5) + (3 << FSHIFT))))); +} + +static int heartbeat_drv_probe(struct platform_device *pdev) +{ + struct resource *res; + struct heartbeat_data *hd; + + if (unlikely(pdev->num_resources != 1)) { + dev_err(&pdev->dev, "invalid number of resources\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(res == NULL)) { + dev_err(&pdev->dev, "invalid resource\n"); + return -EINVAL; + } + + hd = kmalloc(sizeof(struct heartbeat_data), GFP_KERNEL); + if (unlikely(!hd)) + return -ENOMEM; + + if (pdev->dev.platform_data) { + memcpy(hd->bit_pos, pdev->dev.platform_data, + ARRAY_SIZE(hd->bit_pos)); + } else { + int i; + + for (i = 0; i < ARRAY_SIZE(hd->bit_pos); i++) + hd->bit_pos[i] = i; + } + + hd->base = (void __iomem *)res->start; + + setup_timer(&hd->timer, heartbeat_timer, (unsigned long)hd); + platform_set_drvdata(pdev, hd); + + return mod_timer(&hd->timer, jiffies + 1); +} + +static int heartbeat_drv_remove(struct platform_device *pdev) +{ + struct heartbeat_data *hd = platform_get_drvdata(pdev); + + del_timer_sync(&hd->timer); + + platform_set_drvdata(pdev, NULL); + + kfree(hd); + + return 0; +} + +static struct platform_driver heartbeat_driver = { + .probe = heartbeat_drv_probe, + .remove = heartbeat_drv_remove, + .driver = { + .name = DRV_NAME, + }, +}; + +static int __init heartbeat_init(void) +{ + printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION); + return platform_driver_register(&heartbeat_driver); +} + +static void __exit heartbeat_exit(void) +{ + platform_driver_unregister(&heartbeat_driver); +} +module_init(heartbeat_init); +module_exit(heartbeat_exit); + +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("Paul Mundt"); +MODULE_LICENSE("GPLv2"); diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 9e00cb8a39e..cc8d0d0b142 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ dma-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o -obj-$(CONFIG_SH_BIGSUR) += ops-bigsur.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o obj-$(CONFIG_SH_R7780RP) += ops-r7780rp.o fixups-r7780rp.o diff --git a/arch/sh/drivers/pci/ops-bigsur.c b/arch/sh/drivers/pci/ops-bigsur.c deleted file mode 100644 index eb31be75152..00000000000 --- a/arch/sh/drivers/pci/ops-bigsur.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-bigsur.c - * - * By Dustin McIntire (dustin@sensoria.com) (c)2001 - * - * Ported to new API by Paul Mundt <lethal@linux-sh.org>. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Hitachi Big Sur Evaluation Board - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <asm/io.h> -#include "pci-sh4.h" -#include <asm/bigsur/bigsur.h> - -#define BIGSUR_PCI_IO 0x4000 -#define BIGSUR_PCI_MEM 0xfd000000 - -static struct resource sh7751_io_resource = { - .name = "SH7751 IO", - .start = BIGSUR_PCI_IO, - .end = BIGSUR_PCI_IO + (64*1024) - 1, - .flags = IORESOURCE_IO, -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751 mem", - .start = BIGSUR_PCI_MEM, - .end = BIGSUR_PCI_MEM + (64*1024*1024) - 1, - .flags = IORESOURCE_MEM, -}; - -extern struct pci_ops sh7751_pci_ops; - -struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { 0, } -}; - -static struct sh4_pci_address_map sh7751_pci_map = { - .window0 = { - .base = SH7751_CS3_BASE_ADDR, - .size = BIGSUR_LSR0_SIZE, - }, - - .window1 = { - .base = SH7751_CS3_BASE_ADDR, - .size = BIGSUR_LSR1_SIZE, - }, -}; - -/* - * Initialize the Big Sur PCI interface - * Setup hardware to be Central Funtion - * Copy the BSR regs to the PCI interface - * Setup PCI windows into local RAM - */ -int __init pcibios_init_platform(void) -{ - return sh7751_pcic_init(&sh7751_pci_map); -} - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - /* - * The Big Sur can be used in a CPCI chassis, but the SH7751 PCI - * interface is on the wrong end of the board so that it can also - * support a V320 CPI interface chip... Therefor the IRQ mapping is - * somewhat use dependent... I'l assume a linear map for now, i.e. - * INTA=slot0,pin0... INTD=slot3,pin0... - */ - int irq = (slot + pin-1) % 4 + BIGSUR_SH7751_PCI_IRQ_BASE; - - PCIDBG(2, "PCI: Mapping Big Sur IRQ for slot %d, pin %c to irq %d\n", - slot, pin-1+'A', irq); - - return irq; -} diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 85e1ee2e2e7..9ddff760d3c 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -157,15 +157,6 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) PCIBIOS_MIN_IO, (64 << 10), SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO); - /* - * XXX: For now, leave this board-specific. In the event we have other - * boards that need to do similar work, this can be wrapped. - */ -#ifdef CONFIG_SH_BIGSUR - bigsur_port_map(PCIBIOS_MIN_IO, (64 << 10), - SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO, 0); -#endif - /* Make sure the MSB's of IO window are set to access PCI space * correctly */ word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK; diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 2f6d2bcb1c9..ff30d7f5804 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -6,7 +6,8 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := process.o signal.o traps.o irq.o \ ptrace.o setup.o time.o sys_sh.o semaphore.o \ - io.o io_generic.o sh_ksyms.o syscalls.o + io.o io_generic.o sh_ksyms.o syscalls.o \ + debugtraps.o obj-y += cpu/ timers/ obj-$(CONFIG_VSYSCALL) += vsyscall/ diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index 48121766e8d..4b339a640b1 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -3,7 +3,7 @@ * * CPU init code * - * Copyright (C) 2002, 2003 Paul Mundt + * Copyright (C) 2002 - 2006 Paul Mundt * Copyright (C) 2003 Richard Curnow * * This file is subject to the terms and conditions of the GNU General Public @@ -12,6 +12,8 @@ */ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/mm.h> +#include <asm/mmu_context.h> #include <asm/processor.h> #include <asm/uaccess.h> #include <asm/page.h> @@ -46,7 +48,7 @@ static void __init cache_init(void) { unsigned long ccr, flags; - if (cpu_data->type == CPU_SH_NONE) + if (current_cpu_data.type == CPU_SH_NONE) panic("Unknown CPU"); jump_to_P2(); @@ -66,7 +68,7 @@ static void __init cache_init(void) if (ccr & CCR_CACHE_ENABLE) { unsigned long ways, waysize, addrstart; - waysize = cpu_data->dcache.sets; + waysize = current_cpu_data.dcache.sets; #ifdef CCR_CACHE_ORA /* @@ -77,7 +79,7 @@ static void __init cache_init(void) waysize >>= 1; #endif - waysize <<= cpu_data->dcache.entry_shift; + waysize <<= current_cpu_data.dcache.entry_shift; #ifdef CCR_CACHE_EMODE /* If EMODE is not set, we only have 1 way to flush. */ @@ -85,7 +87,7 @@ static void __init cache_init(void) ways = 1; else #endif - ways = cpu_data->dcache.ways; + ways = current_cpu_data.dcache.ways; addrstart = CACHE_OC_ADDRESS_ARRAY; do { @@ -93,10 +95,10 @@ static void __init cache_init(void) for (addr = addrstart; addr < addrstart + waysize; - addr += cpu_data->dcache.linesz) + addr += current_cpu_data.dcache.linesz) ctrl_outl(0, addr); - addrstart += cpu_data->dcache.way_incr; + addrstart += current_cpu_data.dcache.way_incr; } while (--ways); } @@ -108,7 +110,7 @@ static void __init cache_init(void) #ifdef CCR_CACHE_EMODE /* Force EMODE if possible */ - if (cpu_data->dcache.ways > 1) + if (current_cpu_data.dcache.ways > 1) flags |= CCR_CACHE_EMODE; else flags &= ~CCR_CACHE_EMODE; @@ -125,10 +127,10 @@ static void __init cache_init(void) #ifdef CONFIG_SH_OCRAM /* Turn on OCRAM -- halve the OC */ flags |= CCR_CACHE_ORA; - cpu_data->dcache.sets >>= 1; + current_cpu_data.dcache.sets >>= 1; - cpu_data->dcache.way_size = cpu_data->dcache.sets * - cpu_data->dcache.linesz; + current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets * + current_cpu_data.dcache.linesz; #endif ctrl_outl(flags, CCR); @@ -170,7 +172,7 @@ static void __init dsp_init(void) /* If the DSP bit is still set, this CPU has a DSP */ if (sr & SR_DSP) - cpu_data->flags |= CPU_HAS_DSP; + current_cpu_data.flags |= CPU_HAS_DSP; /* Now that we've determined the DSP status, clear the DSP bit. */ release_dsp(); @@ -202,22 +204,28 @@ asmlinkage void __init sh_cpu_init(void) cache_init(); shm_align_mask = max_t(unsigned long, - cpu_data->dcache.way_size - 1, + current_cpu_data.dcache.way_size - 1, PAGE_SIZE - 1); /* Disable the FPU */ if (fpu_disabled) { printk("FPU Disabled\n"); - cpu_data->flags &= ~CPU_HAS_FPU; + current_cpu_data.flags &= ~CPU_HAS_FPU; disable_fpu(); } /* FPU initialization */ - if ((cpu_data->flags & CPU_HAS_FPU)) { + if ((current_cpu_data.flags & CPU_HAS_FPU)) { clear_thread_flag(TIF_USEDFPU); clear_used_math(); } + /* + * Initialize the per-CPU ASID cache very early, since the + * TLB flushing routines depend on this being setup. + */ + current_cpu_data.asid_cache = NO_CONTEXT; + #ifdef CONFIG_SH_DSP /* Probe for DSP */ dsp_init(); @@ -225,7 +233,7 @@ asmlinkage void __init sh_cpu_init(void) /* Disable the DSP */ if (dsp_disabled) { printk("DSP Disabled\n"); - cpu_data->flags &= ~CPU_HAS_DSP; + current_cpu_data.flags &= ~CPU_HAS_DSP; release_dsp(); } #endif @@ -240,4 +248,3 @@ asmlinkage void __init sh_cpu_init(void) ubc_wakeup(); #endif } - diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index 35eb5751a3a..210280b6fdd 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -43,16 +43,29 @@ static struct irq_chip ipr_irq_chip = { .mask_ack = disable_ipr_irq, }; +unsigned int map_ipridx_to_addr(int idx) __attribute__ ((weak)); +unsigned int map_ipridx_to_addr(int idx) +{ + return 0; +} + void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs) { int i; for (i = 0; i < nr_irqs; i++) { unsigned int irq = table[i].irq; - table[i].addr = map_ipridx_to_addr(table[i].ipr_idx); + + if (!irq) + irq = table[i].irq = i; + /* could the IPR index be mapped, if not we ignore this */ - if (table[i].addr == 0) - continue; + if (!table[i].addr) { + table[i].addr = map_ipridx_to_addr(table[i].ipr_idx); + if (!table[i].addr) + continue; + } + disable_irq_nosync(irq); set_irq_chip_and_handler_name(irq, &ipr_irq_chip, handle_level_irq, "level"); diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index d51fa5e9904..7f7d292f36e 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -178,12 +178,10 @@ interrupt_entry: 8: .long do_exception_error trap_entry: - /* verbose BUG trapa entry check */ - mov #0x3e,r8 - cmp/ge r8,r9 - bf/s 1f - add #-0x10,r9 - add #0x10,r9 + mov #0x30,r8 + cmp/ge r8,r9 ! vector 0x20-0x2f is systemcall + bt 1f + add #-0x10,r9 ! convert SH2 to SH3/4 ABI 1: shll2 r9 ! TRA mov #OFF_TRA,r8 @@ -206,7 +204,7 @@ trap_entry: #if defined(CONFIG_SH_STANDARD_BIOS) /* Unwind the stack and jmp to the debug entry */ -debug_kernel_fw: +ENTRY(sh_bios_handler) mov r15,r0 add #(22-4)*4-4,r0 ldc.l @r0+,gbr diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c index ba527d9b502..108e81b682e 100644 --- a/arch/sh/kernel/cpu/sh2/probe.c +++ b/arch/sh/kernel/cpu/sh2/probe.c @@ -18,27 +18,27 @@ int __init detect_cpu_and_cache_system(void) { #if defined(CONFIG_CPU_SUBTYPE_SH7604) - cpu_data->type = CPU_SH7604; - cpu_data->dcache.ways = 4; - cpu_data->dcache.way_incr = (1<<10); - cpu_data->dcache.sets = 64; - cpu_data->dcache.entry_shift = 4; - cpu_data->dcache.linesz = L1_CACHE_BYTES; - cpu_data->dcache.flags = 0; + current_cpu_data.type = CPU_SH7604; + current_cpu_data.dcache.ways = 4; + current_cpu_data.dcache.way_incr = (1<<10); + current_cpu_data.dcache.sets = 64; + current_cpu_data.dcache.entry_shift = 4; + current_cpu_data.dcache.linesz = L1_CACHE_BYTES; + current_cpu_data.dcache.flags = 0; #elif defined(CONFIG_CPU_SUBTYPE_SH7619) - cpu_data->type = CPU_SH7619; - cpu_data->dcache.ways = 4; - cpu_data->dcache.way_incr = (1<<12); - cpu_data->dcache.sets = 256; - cpu_data->dcache.entry_shift = 4; - cpu_data->dcache.linesz = L1_CACHE_BYTES; - cpu_data->dcache.flags = 0; + current_cpu_data.type = CPU_SH7619; + current_cpu_data.dcache.ways = 4; + current_cpu_data.dcache.way_incr = (1<<12); + current_cpu_data.dcache.sets = 256; + current_cpu_data.dcache.entry_shift = 4; + current_cpu_data.dcache.linesz = L1_CACHE_BYTES; + current_cpu_data.dcache.flags = 0; #endif /* * SH-2 doesn't have separate caches */ - cpu_data->dcache.flags |= SH_CACHE_COMBINED; - cpu_data->icache = cpu_data->dcache; + current_cpu_data.dcache.flags |= SH_CACHE_COMBINED; + current_cpu_data.icache = current_cpu_data.dcache; return 0; } diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index 79283e6c1d8..f83ff8a68f3 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -52,42 +52,38 @@ static int __init sh7619_devices_setup(void) } __initcall(sh7619_devices_setup); -#define INTC_IPRC 0xf8080000UL -#define INTC_IPRD 0xf8080002UL - -#define CMI0_IRQ 86 - -#define SCIF0_ERI_IRQ 88 -#define SCIF0_RXI_IRQ 89 -#define SCIF0_BRI_IRQ 90 -#define SCIF0_TXI_IRQ 91 - -#define SCIF1_ERI_IRQ 92 -#define SCIF1_RXI_IRQ 93 -#define SCIF1_BRI_IRQ 94 -#define SCIF1_TXI_IRQ 95 - -#define SCIF2_BRI_IRQ 96 -#define SCIF2_ERI_IRQ 97 -#define SCIF2_RXI_IRQ 98 -#define SCIF2_TXI_IRQ 99 - static struct ipr_data sh7619_ipr_map[] = { - { CMI0_IRQ, INTC_IPRC, 1, 2 }, - { SCIF0_ERI_IRQ, INTC_IPRD, 3, 3 }, - { SCIF0_RXI_IRQ, INTC_IPRD, 3, 3 }, - { SCIF0_BRI_IRQ, INTC_IPRD, 3, 3 }, - { SCIF0_TXI_IRQ, INTC_IPRD, 3, 3 }, - { SCIF1_ERI_IRQ, INTC_IPRD, 2, 3 }, - { SCIF1_RXI_IRQ, INTC_IPRD, 2, 3 }, - { SCIF1_BRI_IRQ, INTC_IPRD, 2, 3 }, - { SCIF1_TXI_IRQ, INTC_IPRD, 2, 3 }, - { SCIF2_ERI_IRQ, INTC_IPRD, 1, 3 }, - { SCIF2_RXI_IRQ, INTC_IPRD, 1, 3 }, - { SCIF2_BRI_IRQ, INTC_IPRD, 1, 3 }, - { SCIF2_TXI_IRQ, INTC_IPRD, 1, 3 }, + { 86, 0, 4, 2 }, /* CMI0 */ + { 88, 1, 12, 3 }, /* SCIF0_ERI */ + { 89, 1, 12, 3 }, /* SCIF0_RXI */ + { 90, 1, 12, 3 }, /* SCIF0_BRI */ + { 91, 1, 12, 3 }, /* SCIF0_TXI */ + { 92, 1, 8, 3 }, /* SCIF1_ERI */ + { 93, 1, 8, 3 }, /* SCIF1_RXI */ + { 94, 1, 8, 3 }, /* SCIF1_BRI */ + { 95, 1, 8, 3 }, /* SCIF1_TXI */ + { 96, 1, 4, 3 }, /* SCIF2_ERI */ + { 97, 1, 4, 3 }, /* SCIF2_RXI */ + { 98, 1, 4, 3 }, /* SCIF2_BRI */ + { 99, 1, 4, 3 }, /* SCIF2_TXI */ }; +static unsigned int ipr_offsets[] = { + 0xf8080000, /* IPRC */ + 0xf8080002, /* IPRD */ + 0xf8080004, /* IPRE */ + 0xf8080006, /* IPRF */ + 0xf8080008, /* IPRG */ +}; + +/* given the IPR index return the address of the IPR register */ +unsigned int map_ipridx_to_addr(int idx) +{ + if (unlikely(idx >= ARRAY_SIZE(ipr_offsets))) + return 0; + return ipr_offsets[idx]; +} + void __init init_IRQ_ipr(void) { make_ipr_irq(sh7619_ipr_map, ARRAY_SIZE(sh7619_ipr_map)); diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c index 87c6c054208..426f6db01fc 100644 --- a/arch/sh/kernel/cpu/sh2a/probe.c +++ b/arch/sh/kernel/cpu/sh2a/probe.c @@ -17,14 +17,14 @@ int __init detect_cpu_and_cache_system(void) { /* Just SH7206 for now .. */ - cpu_data->type = CPU_SH7206; + current_cpu_data.type = CPU_SH7206; - cpu_data->dcache.ways = 4; - cpu_data->dcache.way_incr = (1 << 11); - cpu_data->dcache.sets = 128; - cpu_data->dcache.entry_shift = 4; - cpu_data->dcache.linesz = L1_CACHE_BYTES; - cpu_data->dcache.flags = 0; + current_cpu_data.dcache.ways = 4; + current_cpu_data.dcache.way_incr = (1 << 11); + current_cpu_data.dcache.sets = 128; + current_cpu_data.dcache.entry_shift = 4; + current_cpu_data.dcache.linesz = L1_CACHE_BYTES; + current_cpu_data.dcache.flags = 0; /* * The icache is the same as the dcache as far as this setup is @@ -32,7 +32,7 @@ int __init detect_cpu_and_cache_system(void) * lacks the U bit that the dcache has, none of this has any bearing * on the cache info. */ - cpu_data->icache = cpu_data->dcache; + current_cpu_data.icache = current_cpu_data.dcache; return 0; } diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index 4b60fcc7d66..4ed9110632b 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -57,55 +57,52 @@ static int __init sh7206_devices_setup(void) } __initcall(sh7206_devices_setup); -#define INTC_IPR08 0xfffe0c04UL -#define INTC_IPR09 0xfffe0c06UL -#define INTC_IPR14 0xfffe0c10UL - -#define CMI0_IRQ 140 - -#define MTU1_TGI1A 164 - -#define SCIF0_BRI_IRQ 240 -#define SCIF0_ERI_IRQ 241 -#define SCIF0_RXI_IRQ 242 -#define SCIF0_TXI_IRQ 243 - -#define SCIF1_BRI_IRQ 244 -#define SCIF1_ERI_IRQ 245 -#define SCIF1_RXI_IRQ 246 -#define SCIF1_TXI_IRQ 247 - -#define SCIF2_BRI_IRQ 248 -#define SCIF2_ERI_IRQ 249 -#define SCIF2_RXI_IRQ 250 -#define SCIF2_TXI_IRQ 251 - -#define SCIF3_BRI_IRQ 252 -#define SCIF3_ERI_IRQ 253 -#define SCIF3_RXI_IRQ 254 -#define SCIF3_TXI_IRQ 255 - static struct ipr_data sh7206_ipr_map[] = { - { CMI0_IRQ, INTC_IPR08, 3, 2 }, - { MTU2_TGI1A, INTC_IPR09, 1, 2 }, - { SCIF0_ERI_IRQ, INTC_IPR14, 3, 3 }, - { SCIF0_RXI_IRQ, INTC_IPR14, 3, 3 }, - { SCIF0_BRI_IRQ, INTC_IPR14, 3, 3 }, - { SCIF0_TXI_IRQ, INTC_IPR14, 3, 3 }, - { SCIF1_ERI_IRQ, INTC_IPR14, 2, 3 }, - { SCIF1_RXI_IRQ, INTC_IPR14, 2, 3 }, - { SCIF1_BRI_IRQ, INTC_IPR14, 2, 3 }, - { SCIF1_TXI_IRQ, INTC_IPR14, 2, 3 }, - { SCIF2_ERI_IRQ, INTC_IPR14, 1, 3 }, - { SCIF2_RXI_IRQ, INTC_IPR14, 1, 3 }, - { SCIF2_BRI_IRQ, INTC_IPR14, 1, 3 }, - { SCIF2_TXI_IRQ, INTC_IPR14, 1, 3 }, - { SCIF3_ERI_IRQ, INTC_IPR14, 0, 3 }, - { SCIF3_RXI_IRQ, INTC_IPR14, 0, 3 }, - { SCIF3_BRI_IRQ, INTC_IPR14, 0, 3 }, - { SCIF3_TXI_IRQ, INTC_IPR14, 0, 3 }, + { 140, 7, 12, 2 }, /* CMI0 */ + { 164, 8, 4, 2 }, /* MTU2_TGI1A */ + { 240, 13, 12, 3 }, /* SCIF0_BRI */ + { 241, 13, 12, 3 }, /* SCIF0_ERI */ + { 242, 13, 12, 3 }, /* SCIF0_RXI */ + { 243, 13, 12, 3 }, /* SCIF0_TXI */ + { 244, 13, 8, 3 }, /* SCIF1_BRI */ + { 245, 13, 8, 3 }, /* SCIF1_ERI */ + { 246, 13, 8, 3 }, /* SCIF1_RXI */ + { 247, 13, 8, 3 }, /* SCIF1_TXI */ + { 248, 13, 4, 3 }, /* SCIF2_BRI */ + { 249, 13, 4, 3 }, /* SCIF2_ERI */ + { 250, 13, 4, 3 }, /* SCIF2_RXI */ + { 251, 13, 4, 3 }, /* SCIF2_TXI */ + { 252, 13, 0, 3 }, /* SCIF3_BRI */ + { 253, 13, 0, 3 }, /* SCIF3_ERI */ + { 254, 13, 0, 3 }, /* SCIF3_RXI */ + { 255, 13, 0, 3 }, /* SCIF3_TXI */ +}; + +static unsigned int ipr_offsets[] = { + 0xfffe0818, /* IPR01 */ + 0xfffe081a, /* IPR02 */ + 0, /* unused */ + 0, /* unused */ + 0xfffe0820, /* IPR05 */ + 0xfffe0c00, /* IPR06 */ + 0xfffe0c02, /* IPR07 */ + 0xfffe0c04, /* IPR08 */ + 0xfffe0c06, /* IPR09 */ + 0xfffe0c08, /* IPR10 */ + 0xfffe0c0a, /* IPR11 */ + 0xfffe0c0c, /* IPR12 */ + 0xfffe0c0e, /* IPR13 */ + 0xfffe0c10, /* IPR14 */ }; +/* given the IPR index return the address of the IPR register */ +unsigned int map_ipridx_to_addr(int idx) +{ + if (unlikely(idx >= ARRAY_SIZE(ipr_offsets))) + return 0; + return ipr_offsets[idx]; +} + void __init init_IRQ_ipr(void) { make_ipr_irq(sh7206_ipr_map, ARRAY_SIZE(sh7206_ipr_map)); diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 8c0dc2700c6..c19205b0f2c 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -13,10 +13,8 @@ #include <linux/linkage.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h> -#include <asm/unistd.h> #include <asm/cpu/mmu_context.h> -#include <asm/pgtable.h> -#include <asm/page.h> +#include <asm/unistd.h> ! NOTE: ! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address @@ -138,14 +136,29 @@ ENTRY(tlb_protection_violation_store) call_dpf: mov.l 1f, r0 - mov.l @r0, r6 ! address + mov r5, r8 + mov.l @r0, r6 + mov r6, r9 + mov.l 2f, r0 + sts pr, r10 + jsr @r0 + mov r15, r4 + ! + tst r0, r0 + bf/s 0f + lds r10, pr + rts + nop +0: sti mov.l 3f, r0 - + mov r9, r6 + mov r8, r5 jmp @r0 - mov r15, r4 ! regs + mov r15, r4 .align 2 1: .long MMU_TEA +2: .long __do_page_fault 3: .long do_page_fault .align 2 @@ -173,7 +186,7 @@ call_dae: #if defined(CONFIG_SH_STANDARD_BIOS) /* Unwind the stack and jmp to the debug entry */ -debug_kernel_fw: +ENTRY(sh_bios_handler) mov.l @r15+, r0 mov.l @r15+, r1 mov.l @r15+, r2 @@ -332,175 +345,9 @@ general_exception: ! ! -/* This code makes some assumptions to improve performance. - * Make sure they are stil true. */ -#if PTRS_PER_PGD != PTRS_PER_PTE -#error PGD and PTE sizes don't match -#endif - -/* gas doesn't flag impossible values for mov #immediate as an error */ -#if (_PAGE_PRESENT >> 2) > 0x7f -#error cannot load PAGE_PRESENT as an immediate -#endif -#if _PAGE_DIRTY > 0x7f -#error cannot load PAGE_DIRTY as an immediate -#endif -#if (_PAGE_PRESENT << 2) != _PAGE_ACCESSED -#error cannot derive PAGE_ACCESSED from PAGE_PRESENT -#endif - -#if defined(CONFIG_CPU_SH4) -#define ldmmupteh(r) mov.l 8f, r -#else -#define ldmmupteh(r) mov #MMU_PTEH, r -#endif - .balign 1024,0,1024 tlb_miss: -#ifdef COUNT_EXCEPTIONS - ! Increment the counts - mov.l 9f, k1 - mov.l @k1, k2 - add #1, k2 - mov.l k2, @k1 -#endif - - ! k0 scratch - ! k1 pgd and pte pointers - ! k2 faulting address - ! k3 pgd and pte index masks - ! k4 shift - - ! Load up the pgd entry (k1) - - ldmmupteh(k0) ! 9 LS (latency=2) MMU_PTEH - - mov.w 4f, k3 ! 8 LS (latency=2) (PTRS_PER_PGD-1) << 2 - mov #-(PGDIR_SHIFT-2), k4 ! 6 EX - - mov.l @(MMU_TEA-MMU_PTEH,k0), k2 ! 18 LS (latency=2) - - mov.l @(MMU_TTB-MMU_PTEH,k0), k1 ! 18 LS (latency=2) - - mov k2, k0 ! 5 MT (latency=0) - shld k4, k0 ! 99 EX - - and k3, k0 ! 78 EX - - mov.l @(k0, k1), k1 ! 21 LS (latency=2) - mov #-(PAGE_SHIFT-2), k4 ! 6 EX - - ! Load up the pte entry (k2) - - mov k2, k0 ! 5 MT (latency=0) - shld k4, k0 ! 99 EX - - tst k1, k1 ! 86 MT - - bt 20f ! 110 BR - - and k3, k0 ! 78 EX - mov.w 5f, k4 ! 8 LS (latency=2) _PAGE_PRESENT - - mov.l @(k0, k1), k2 ! 21 LS (latency=2) - add k0, k1 ! 49 EX - -#ifdef CONFIG_CPU_HAS_PTEA - ! Test the entry for present and _PAGE_ACCESSED - - mov #-28, k3 ! 6 EX - mov k2, k0 ! 5 MT (latency=0) - - tst k4, k2 ! 68 MT - shld k3, k0 ! 99 EX - - bt 20f ! 110 BR - - ! Set PTEA register - ! MMU_PTEA = ((pteval >> 28) & 0xe) | (pteval & 0x1) - ! - ! k0=pte>>28, k1=pte*, k2=pte, k3=<unused>, k4=_PAGE_PRESENT - - and #0xe, k0 ! 79 EX - - mov k0, k3 ! 5 MT (latency=0) - mov k2, k0 ! 5 MT (latency=0) - - and #1, k0 ! 79 EX - - or k0, k3 ! 82 EX - - ldmmupteh(k0) ! 9 LS (latency=2) - shll2 k4 ! 101 EX _PAGE_ACCESSED - - tst k4, k2 ! 68 MT - - mov.l k3, @(MMU_PTEA-MMU_PTEH,k0) ! 27 LS - - mov.l 7f, k3 ! 9 LS (latency=2) _PAGE_FLAGS_HARDWARE_MASK - - ! k0=MMU_PTEH, k1=pte*, k2=pte, k3=_PAGE_FLAGS_HARDWARE, k4=_PAGE_ACCESSED -#else - - ! Test the entry for present and _PAGE_ACCESSED - - mov.l 7f, k3 ! 9 LS (latency=2) _PAGE_FLAGS_HARDWARE_MASK - tst k4, k2 ! 68 MT - - shll2 k4 ! 101 EX _PAGE_ACCESSED - ldmmupteh(k0) ! 9 LS (latency=2) - - bt 20f ! 110 BR - tst k4, k2 ! 68 MT - - ! k0=MMU_PTEH, k1=pte*, k2=pte, k3=_PAGE_FLAGS_HARDWARE, k4=_PAGE_ACCESSED - -#endif - - ! Set up the entry - - and k2, k3 ! 78 EX - bt/s 10f ! 108 BR - - mov.l k3, @(MMU_PTEL-MMU_PTEH,k0) ! 27 LS - - ldtlb ! 128 CO - - ! At least one instruction between ldtlb and rte - nop ! 119 NOP - - rte ! 126 CO - - nop ! 119 NOP - - -10: or k4, k2 ! 82 EX - - ldtlb ! 128 CO - - ! At least one instruction between ldtlb and rte - mov.l k2, @k1 ! 27 LS - - rte ! 126 CO - - ! Note we cannot execute mov here, because it is executed after - ! restoring SSR, so would be executed in user space. - nop ! 119 NOP - - - .align 5 - ! Once cache line if possible... -1: .long swapper_pg_dir -4: .short (PTRS_PER_PGD-1) << 2 -5: .short _PAGE_PRESENT -7: .long _PAGE_FLAGS_HARDWARE_MASK -8: .long MMU_PTEH -#ifdef COUNT_EXCEPTIONS -9: .long exception_count_miss -#endif - - ! Either pgd or pte not present -20: mov.l 1f, k2 + mov.l 1f, k2 mov.l 4f, k3 bra handle_exception mov.l @k2, k2 @@ -651,15 +498,6 @@ skip_save: bf interrupt_exception shlr2 r8 shlr r8 - -#ifdef COUNT_EXCEPTIONS - mov.l 5f, r9 - add r8, r9 - mov.l @r9, r10 - add #1, r10 - mov.l r10, @r9 -#endif - mov.l 4f, r9 add r8, r9 mov.l @r9, r9 @@ -673,9 +511,6 @@ skip_save: 2: .long 0x000080f0 ! FD=1, IMASK=15 3: .long 0xcfffffff ! RB=0, BL=0 4: .long exception_handling_table -#ifdef COUNT_EXCEPTIONS -5: .long exception_count_table -#endif interrupt_exception: mov.l 1f, r9 diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c index e6709883629..821b0ab7b52 100644 --- a/arch/sh/kernel/cpu/sh3/probe.c +++ b/arch/sh/kernel/cpu/sh3/probe.c @@ -50,41 +50,41 @@ int __init detect_cpu_and_cache_system(void) back_to_P1(); - cpu_data->dcache.ways = 4; - cpu_data->dcache.entry_shift = 4; - cpu_data->dcache.linesz = L1_CACHE_BYTES; - cpu_data->dcache.flags = 0; + current_cpu_data.dcache.ways = 4; + current_cpu_data.dcache.entry_shift = 4; + current_cpu_data.dcache.linesz = L1_CACHE_BYTES; + current_cpu_data.dcache.flags = 0; /* * 7709A/7729 has 16K cache (256-entry), while 7702 has only * 2K(direct) 7702 is not supported (yet) */ if (data0 == data1 && data2 == data3) { /* Shadow */ - cpu_data->dcache.way_incr = (1 << 11); - cpu_data->dcache.entry_mask = 0x7f0; - cpu_data->dcache.sets = 128; - cpu_data->type = CPU_SH7708; + current_cpu_data.dcache.way_incr = (1 << 11); + current_cpu_data.dcache.entry_mask = 0x7f0; + current_cpu_data.dcache.sets = 128; + current_cpu_data.type = CPU_SH7708; - cpu_data->flags |= CPU_HAS_MMU_PAGE_ASSOC; + current_cpu_data.flags |= CPU_HAS_MMU_PAGE_ASSOC; } else { /* 7709A or 7729 */ - cpu_data->dcache.way_incr = (1 << 12); - cpu_data->dcache.entry_mask = 0xff0; - cpu_data->dcache.sets = 256; - cpu_data->type = CPU_SH7729; + current_cpu_data.dcache.way_incr = (1 << 12); + current_cpu_data.dcache.entry_mask = 0xff0; + current_cpu_data.dcache.sets = 256; + current_cpu_data.type = CPU_SH7729; #if defined(CONFIG_CPU_SUBTYPE_SH7706) - cpu_data->type = CPU_SH7706; + current_cpu_data.type = CPU_SH7706; #endif #if defined(CONFIG_CPU_SUBTYPE_SH7710) - cpu_data->type = CPU_SH7710; + current_cpu_data.type = CPU_SH7710; #endif #if defined(CONFIG_CPU_SUBTYPE_SH7705) - cpu_data->type = CPU_SH7705; + current_cpu_data.type = CPU_SH7705; #if defined(CONFIG_SH7705_CACHE_32KB) - cpu_data->dcache.way_incr = (1 << 13); - cpu_data->dcache.entry_mask = 0x1ff0; - cpu_data->dcache.sets = 512; + current_cpu_data.dcache.way_incr = (1 << 13); + current_cpu_data.dcache.entry_mask = 0x1ff0; + current_cpu_data.dcache.sets = 512; ctrl_outl(CCR_CACHE_32KB, CCR3); #else ctrl_outl(CCR_CACHE_16KB, CCR3); @@ -95,8 +95,8 @@ int __init detect_cpu_and_cache_system(void) /* * SH-3 doesn't have separate caches */ - cpu_data->dcache.flags |= SH_CACHE_COMBINED; - cpu_data->icache = cpu_data->dcache; + current_cpu_data.dcache.flags |= SH_CACHE_COMBINED; + current_cpu_data.icache = current_cpu_data.dcache; return 0; } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c index ff43ef2a1f0..dc9b211cf87 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7709.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7709.c @@ -51,3 +51,24 @@ static int __init sh7709_devices_setup(void) ARRAY_SIZE(sh7709_devices)); } __initcall(sh7709_devices_setup); + +#define IPRx(A,N) .addr=A, .shift=0*N*-1 +#define IPRA(N) IPRx(0xfffffee2UL,N) +#define IPRB(N) IPRx(0xfffffee4UL,N) +#define IPRE(N) IPRx(0xa400001aUL,N) + +static struct ipr_data sh7709_ipr_map[] = { + [16] = { IPRA(15-12), 2 }, /* TMU TUNI0 */ + [17] = { IPRA(11-8), 4 }, /* TMU TUNI1 */ + [22] = { IPRA(3-0), 2 }, /* RTC CUI */ + [23 ... 26] = { IPRB(7-4), 3 }, /* SCI */ + [27] = { IPRB(15-12), 2 }, /* WDT ITI */ + [48 ... 51] = { IPRE(15-12), 7 }, /* DMA */ + [52 ... 55] = { IPRE(11-8), 3 }, /* IRDA */ + [56 ... 59] = { IPRE(7-4), 3 }, /* SCIF */ +}; + +void __init init_IRQ_ipr() +{ + make_ipr_irq(sh7709_ipr_map, ARRAY_SIZE(sh7709_ipr_map)); +} diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index 9031a22a2ce..9d28c88d2f9 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -10,11 +10,10 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ - #include <linux/init.h> +#include <linux/io.h> #include <asm/processor.h> #include <asm/cache.h> -#include <asm/io.h> int __init detect_cpu_and_cache_system(void) { @@ -36,20 +35,20 @@ int __init detect_cpu_and_cache_system(void) /* * Setup some sane SH-4 defaults for the icache */ - cpu_data->icache.way_incr = (1 << 13); - cpu_data->icache.entry_shift = 5; - cpu_data->icache.sets = 256; - cpu_data->icache.ways = 1; - cpu_data->icache.linesz = L1_CACHE_BYTES; + current_cpu_data.icache.way_incr = (1 << 13); + current_cpu_data.icache.entry_shift = 5; + current_cpu_data.icache.sets = 256; + current_cpu_data.icache.ways = 1; + current_cpu_data.icache.linesz = L1_CACHE_BYTES; /* * And again for the dcache .. */ - cpu_data->dcache.way_incr = (1 << 14); - cpu_data->dcache.entry_shift = 5; - cpu_data->dcache.sets = 512; - cpu_data->dcache.ways = 1; - cpu_data->dcache.linesz = L1_CACHE_BYTES; + current_cpu_data.dcache.way_incr = (1 << 14); + current_cpu_data.dcache.entry_shift = 5; + current_cpu_data.dcache.sets = 512; + current_cpu_data.dcache.ways = 1; + current_cpu_data.dcache.linesz = L1_CACHE_BYTES; /* * Setup some generic flags we can probe @@ -57,16 +56,16 @@ int __init detect_cpu_and_cache_system(void) */ if (((pvr >> 16) & 0xff) == 0x10) { if ((cvr & 0x02000000) == 0) - cpu_data->flags |= CPU_HAS_L2_CACHE; + current_cpu_data.flags |= CPU_HAS_L2_CACHE; if ((cvr & 0x10000000) == 0) - cpu_data->flags |= CPU_HAS_DSP; + current_cpu_data.flags |= CPU_HAS_DSP; - cpu_data->flags |= CPU_HAS_LLSC; + current_cpu_data.flags |= CPU_HAS_LLSC; } /* FPU detection works for everyone */ if ((cvr & 0x20000000) == 1) - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.flags |= CPU_HAS_FPU; /* Mask off the upper chip ID */ pvr &= 0xffff; @@ -77,151 +76,151 @@ int __init detect_cpu_and_cache_system(void) */ switch (pvr) { case 0x205: - cpu_data->type = CPU_SH7750; - cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | + current_cpu_data.type = CPU_SH7750; + current_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | CPU_HAS_PERF_COUNTER; break; case 0x206: - cpu_data->type = CPU_SH7750S; - cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | + current_cpu_data.type = CPU_SH7750S; + current_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | CPU_HAS_PERF_COUNTER; break; case 0x1100: - cpu_data->type = CPU_SH7751; - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.type = CPU_SH7751; + current_cpu_data.flags |= CPU_HAS_FPU; break; case 0x2000: - cpu_data->type = CPU_SH73180; - cpu_data->icache.ways = 4; - cpu_data->dcache.ways = 4; - cpu_data->flags |= CPU_HAS_LLSC; + current_cpu_data.type = CPU_SH73180; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; + current_cpu_data.flags |= CPU_HAS_LLSC; break; case 0x2001: case 0x2004: - cpu_data->type = CPU_SH7770; - cpu_data->icache.ways = 4; - cpu_data->dcache.ways = 4; + current_cpu_data.type = CPU_SH7770; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; - cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_LLSC; + current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_LLSC; break; case 0x2006: case 0x200A: if (prr == 0x61) - cpu_data->type = CPU_SH7781; + current_cpu_data.type = CPU_SH7781; else - cpu_data->type = CPU_SH7780; + current_cpu_data.type = CPU_SH7780; - cpu_data->icache.ways = 4; - cpu_data->dcache.ways = 4; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; - cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | + current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | CPU_HAS_LLSC; break; case 0x3000: case 0x3003: case 0x3009: - cpu_data->type = CPU_SH7343; - cpu_data->icache.ways = 4; - cpu_data->dcache.ways = 4; - cpu_data->flags |= CPU_HAS_LLSC; + current_cpu_data.type = CPU_SH7343; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; + current_cpu_data.flags |= CPU_HAS_LLSC; break; case 0x3008: if (prr == 0xa0) { - cpu_data->type = CPU_SH7722; - cpu_data->icache.ways = 4; - cpu_data->dcache.ways = 4; - cpu_data->flags |= CPU_HAS_LLSC; + current_cpu_data.type = CPU_SH7722; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; + current_cpu_data.flags |= CPU_HAS_LLSC; } break; case 0x8000: - cpu_data->type = CPU_ST40RA; - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.type = CPU_ST40RA; + current_cpu_data.flags |= CPU_HAS_FPU; break; case 0x8100: - cpu_data->type = CPU_ST40GX1; - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.type = CPU_ST40GX1; + current_cpu_data.flags |= CPU_HAS_FPU; break; case 0x700: - cpu_data->type = CPU_SH4_501; - cpu_data->icache.ways = 2; - cpu_data->dcache.ways = 2; + current_cpu_data.type = CPU_SH4_501; + current_cpu_data.icache.ways = 2; + current_cpu_data.dcache.ways = 2; break; case 0x600: - cpu_data->type = CPU_SH4_202; - cpu_data->icache.ways = 2; - cpu_data->dcache.ways = 2; - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.type = CPU_SH4_202; + current_cpu_data.icache.ways = 2; + current_cpu_data.dcache.ways = 2; + current_cpu_data.flags |= CPU_HAS_FPU; break; case 0x500 ... 0x501: switch (prr) { case 0x10: - cpu_data->type = CPU_SH7750R; + current_cpu_data.type = CPU_SH7750R; break; case 0x11: - cpu_data->type = CPU_SH7751R; + current_cpu_data.type = CPU_SH7751R; break; case 0x50 ... 0x5f: - cpu_data->type = CPU_SH7760; + current_cpu_data.type = CPU_SH7760; break; } - cpu_data->icache.ways = 2; - cpu_data->dcache.ways = 2; + current_cpu_data.icache.ways = 2; + current_cpu_data.dcache.ways = 2; - cpu_data->flags |= CPU_HAS_FPU; + current_cpu_data.flags |= CPU_HAS_FPU; break; default: - cpu_data->type = CPU_SH_NONE; + current_cpu_data.type = CPU_SH_NONE; break; } #ifdef CONFIG_SH_DIRECT_MAPPED - cpu_data->icache.ways = 1; - cpu_data->dcache.ways = 1; + current_cpu_data.icache.ways = 1; + current_cpu_data.dcache.ways = 1; #endif #ifdef CONFIG_CPU_HAS_PTEA - cpu_data->flags |= CPU_HAS_PTEA; + current_cpu_data.flags |= CPU_HAS_PTEA; #endif /* * On anything that's not a direct-mapped cache, look to the CVR * for I/D-cache specifics. */ - if (cpu_data->icache.ways > 1) { + if (current_cpu_data.icache.ways > 1) { size = sizes[(cvr >> 20) & 0xf]; - cpu_data->icache.way_incr = (size >> 1); - cpu_data->icache.sets = (size >> 6); + current_cpu_data.icache.way_incr = (size >> 1); + current_cpu_data.icache.sets = (size >> 6); } /* Setup the rest of the I-cache info */ - cpu_data->icache.entry_mask = cpu_data->icache.way_incr - - cpu_data->icache.linesz; + current_cpu_data.icache.entry_mask = current_cpu_data.icache.way_incr - + current_cpu_data.icache.linesz; - cpu_data->icache.way_size = cpu_data->icache.sets * - cpu_data->icache.linesz; + current_cpu_data.icache.way_size = current_cpu_data.icache.sets * + current_cpu_data.icache.linesz; /* And the rest of the D-cache */ - if (cpu_data->dcache.ways > 1) { + if (current_cpu_data.dcache.ways > 1) { size = sizes[(cvr >> 16) & 0xf]; - cpu_data->dcache.way_incr = (size >> 1); - cpu_data->dcache.sets = (size >> 6); + current_cpu_data.dcache.way_incr = (size >> 1); + current_cpu_data.dcache.sets = (size >> 6); } - cpu_data->dcache.entry_mask = cpu_data->dcache.way_incr - - cpu_data->dcache.linesz; + current_cpu_data.dcache.entry_mask = current_cpu_data.dcache.way_incr - + current_cpu_data.dcache.linesz; - cpu_data->dcache.way_size = cpu_data->dcache.sets * - cpu_data->dcache.linesz; + current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets * + current_cpu_data.dcache.linesz; /* * Setup the L2 cache desc * * SH-4A's have an optional PIPT L2. */ - if (cpu_data->flags & CPU_HAS_L2_CACHE) { + if (current_cpu_data.flags & CPU_HAS_L2_CACHE) { /* * Size calculation is much more sensible * than it is for the L1. @@ -232,16 +231,22 @@ int __init detect_cpu_and_cache_system(void) BUG_ON(!size); - cpu_data->scache.way_incr = (1 << 16); - cpu_data->scache.entry_shift = 5; - cpu_data->scache.ways = 4; - cpu_data->scache.linesz = L1_CACHE_BYTES; - cpu_data->scache.entry_mask = - (cpu_data->scache.way_incr - cpu_data->scache.linesz); - cpu_data->scache.sets = size / - (cpu_data->scache.linesz * cpu_data->scache.ways); - cpu_data->scache.way_size = - (cpu_data->scache.sets * cpu_data->scache.linesz); + current_cpu_data.scache.way_incr = (1 << 16); + current_cpu_data.scache.entry_shift = 5; + current_cpu_data.scache.ways = 4; + current_cpu_data.scache.linesz = L1_CACHE_BYTES; + + current_cpu_data.scache.entry_mask = + (current_cpu_data.scache.way_incr - + current_cpu_data.scache.linesz); + + current_cpu_data.scache.sets = size / + (current_cpu_data.scache.linesz * + current_cpu_data.scache.ways); + + current_cpu_data.scache.way_size = + (current_cpu_data.scache.sets * + current_cpu_data.scache.linesz); } return 0; diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index cbac27634c0..6f8f458912c 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -46,11 +46,13 @@ static struct platform_device rtc_device = { static struct plat_sci_port sci_platform_data[] = { { +#ifndef CONFIG_SH_RTS7751R2D .mapbase = 0xffe00000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCI, .irqs = { 23, 24, 25, 0 }, }, { +#endif .mapbase = 0xffe80000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, @@ -101,7 +103,7 @@ static struct ipr_data sh7750_ipr_map[] = { { 35, 2, 8, 7 }, /* DMAC DMTE1 */ { 36, 2, 8, 7 }, /* DMAC DMTE2 */ { 37, 2, 8, 7 }, /* DMAC DMTE3 */ - { 28, 2, 8, 7 }, /* DMAC DMAE */ + { 38, 2, 8, 7 }, /* DMAC DMAE */ }; static struct ipr_data sh7751_ipr_map[] = { diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 07e5377bf55..b7c702821e6 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -52,17 +52,11 @@ static int __init sh7760_devices_setup(void) } __initcall(sh7760_devices_setup); -/* - * SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0 - */ static struct intc2_data intc2_irq_table[] = { - /* INTPRIO0 | INTMSK0 */ {48, 0, 28, 0, 31, 3}, /* IRQ 4 */ {49, 0, 24, 0, 30, 3}, /* IRQ 3 */ {50, 0, 20, 0, 29, 3}, /* IRQ 2 */ {51, 0, 16, 0, 28, 3}, /* IRQ 1 */ - /* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */ - /* INTPRIO4 | INTMSK0 */ {56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */ {57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */ {58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */ @@ -71,18 +65,15 @@ static struct intc2_data intc2_irq_table[] = { {61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */ {62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */ {63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */ - /* INTPRIO8 | INTMSK0 */ {52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */ {53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */ {54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */ {55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */ {64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */ {65, 8, 24, 0, 16, 3}, /* LCDC */ - /* 66, 67 unused */ {68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */ {69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */ {70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */ - /* 71 unused */ {72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */ {73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */ {74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */ @@ -91,26 +82,71 @@ static struct intc2_data intc2_irq_table[] = { {77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */ {78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */ {79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */ - /* | INTMSK4 */ {80, 8, 4, 4, 23, 3}, /* SIM_ERI */ {81, 8, 4, 4, 22, 3}, /* SIM_RXI */ {82, 8, 4, 4, 21, 3}, /* SIM_TXI */ {83, 8, 4, 4, 20, 3}, /* SIM_TEI */ {84, 8, 0, 4, 19, 3}, /* HSPII */ - /* INTPRIOC | INTMSK4 */ - /* 85-87 unused/reserved */ {88, 12, 20, 4, 18, 3}, /* MMCI0 */ {89, 12, 20, 4, 17, 3}, /* MMCI1 */ {90, 12, 20, 4, 16, 3}, /* MMCI2 */ {91, 12, 20, 4, 15, 3}, /* MMCI3 */ - {92, 12, 12, 4, 6, 3}, /* MFI (unsure, bug? in my 7760 manual*/ - /* 93-107 reserved/undocumented */ + {92, 12, 12, 4, 6, 3}, /* MFI */ {108,12, 4, 4, 1, 3}, /* ADC */ {109,12, 0, 4, 0, 3}, /* CMTI */ - /* 110-111 reserved/unused */ }; +static struct ipr_data sh7760_ipr_map[] = { + /* IRQ, IPR-idx, shift, priority */ + { 16, 0, 12, 2 }, /* TMU0 TUNI*/ + { 17, 0, 8, 2 }, /* TMU1 TUNI */ + { 18, 0, 4, 2 }, /* TMU2 TUNI */ + { 19, 0, 4, 2 }, /* TMU2 TIPCI */ + { 27, 1, 12, 2 }, /* WDT ITI */ + { 28, 1, 8, 2 }, /* REF RCMI */ + { 29, 1, 8, 2 }, /* REF ROVI */ + { 32, 2, 0, 7 }, /* HUDI */ + { 33, 2, 12, 7 }, /* GPIOI */ + { 34, 2, 8, 7 }, /* DMAC DMTE0 */ + { 35, 2, 8, 7 }, /* DMAC DMTE1 */ + { 36, 2, 8, 7 }, /* DMAC DMTE2 */ + { 37, 2, 8, 7 }, /* DMAC DMTE3 */ + { 38, 2, 8, 7 }, /* DMAC DMAE */ + { 44, 2, 8, 7 }, /* DMAC DMTE4 */ + { 45, 2, 8, 7 }, /* DMAC DMTE5 */ + { 46, 2, 8, 7 }, /* DMAC DMTE6 */ + { 47, 2, 8, 7 }, /* DMAC DMTE7 */ +/* these here are only valid if INTC_ICR bit 7 is set to 1! + * XXX: maybe CONFIG_SH_IRLMODE symbol? SH7751 could use it too */ +#if 0 + { 2, 3, 12, 3 }, /* IRL0 */ + { 5, 3, 8, 3 }, /* IRL1 */ + { 8, 3, 4, 3 }, /* IRL2 */ + { 11, 3, 0, 3 }, /* IRL3 */ +#endif +}; + +static unsigned long ipr_offsets[] = { + 0xffd00004UL, /* 0: IPRA */ + 0xffd00008UL, /* 1: IPRB */ + 0xffd0000cUL, /* 2: IPRC */ + 0xffd00010UL, /* 3: IPRD */ +}; + +/* given the IPR index return the address of the IPR register */ +unsigned int map_ipridx_to_addr(int idx) +{ + if (idx >= ARRAY_SIZE(ipr_offsets)) + return 0; + return ipr_offsets[idx]; +} + void __init init_IRQ_intc2(void) { make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table)); } + +void __init init_IRQ_ipr(void) +{ + make_ipr_irq(sh7760_ipr_map, ARRAY_SIZE(sh7760_ipr_map)); +} diff --git a/arch/sh/kernel/debugtraps.S b/arch/sh/kernel/debugtraps.S new file mode 100644 index 00000000000..13b66746410 --- /dev/null +++ b/arch/sh/kernel/debugtraps.S @@ -0,0 +1,41 @@ +/* + * arch/sh/kernel/debugtraps.S + * + * Debug trap jump tables for SuperH + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/sys.h> +#include <linux/linkage.h> + +#if !defined(CONFIG_SH_KGDB) +#define kgdb_handle_exception debug_trap_handler +#endif + +#if !defined(CONFIG_SH_STANDARD_BIOS) +#define sh_bios_handler debug_trap_handler +#endif + + .data + +ENTRY(debug_trap_table) + .long debug_trap_handler /* 0x30 */ + .long debug_trap_handler /* 0x31 */ + .long debug_trap_handler /* 0x32 */ + .long debug_trap_handler /* 0x33 */ + .long debug_trap_handler /* 0x34 */ + .long debug_trap_handler /* 0x35 */ + .long debug_trap_handler /* 0x36 */ + .long debug_trap_handler /* 0x37 */ + .long debug_trap_handler /* 0x38 */ + .long debug_trap_handler /* 0x39 */ + .long debug_trap_handler /* 0x3a */ + .long debug_trap_handler /* 0x3b */ + .long kgdb_handle_exception /* 0x3c */ + .long debug_trap_handler /* 0x3d */ + .long bug_trap_handler /* 0x3e */ + .long sh_bios_handler /* 0x3f */ diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 560b91cdd15..9048c0326d8 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -106,12 +106,32 @@ static struct console scif_console = { }; #if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS) +#define DEFAULT_BAUD 115200 /* * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4 * devices that aren't using sh-ipl+g. */ -static void scif_sercon_init(int baud) +static void scif_sercon_init(char *s) { + unsigned baud = DEFAULT_BAUD; + char *e; + + if (*s == ',') + ++s; + + if (*s) { + /* ignore ioport/device name */ + s += strcspn(s, ","); + if (*s == ',') + s++; + } + + if (*s) { + baud = simple_strtoul(s, &e, 0); + if (baud == 0 || s == e) + baud = DEFAULT_BAUD; + } + ctrl_outw(0, scif_port.mapbase + 8); ctrl_outw(0, scif_port.mapbase); @@ -167,7 +187,7 @@ int __init setup_early_printk(char *buf) early_console = &scif_console; #if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS) - scif_sercon_init(115200); + scif_sercon_init(buf + 6); #endif } #endif diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index fc279aeb73a..ab4ebb856c2 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -54,79 +54,24 @@ # define resume_kernel __restore_all #endif -#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) -! Handle kernel debug if either kgdb (SW) or gdb-stub (FW) is present. -! If both are configured, handle the debug traps (breakpoints) in SW, -! but still allow BIOS traps to FW. - - .align 2 -debug_kernel: -#if defined(CONFIG_SH_STANDARD_BIOS) && defined(CONFIG_SH_KGDB) - /* Force BIOS call to FW (debug_trap put TRA in r8) */ - mov r8,r0 - shlr2 r0 - cmp/eq #0x3f,r0 - bt debug_kernel_fw -#endif /* CONFIG_SH_STANDARD_BIOS && CONFIG_SH_KGDB */ - -debug_enter: -#if defined(CONFIG_SH_KGDB) - /* Jump to kgdb, pass stacked regs as arg */ -debug_kernel_sw: - mov.l 3f, r0 - jmp @r0 - mov r15, r4 - .align 2 -3: .long kgdb_handle_exception -#endif /* CONFIG_SH_KGDB */ -#ifdef CONFIG_SH_STANDARD_BIOS - bra debug_kernel_fw - nop -#endif -#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ - - .align 2 -debug_trap: -#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) - mov r8, r0 - shlr2 r0 - cmp/eq #0x3f, r0 ! sh_bios() trap - bf 1f -#ifdef CONFIG_SH_KGDB - cmp/eq #0xff, r0 ! XXX: KGDB trap, fix for SH-2. - bf 1f -#endif - mov #OFF_SR, r0 - mov.l @(r0,r15), r0 ! get status register - shll r0 - shll r0 ! kernel space? - bt/s debug_kernel -1: -#endif - mov.l @r15, r0 ! Restore R0 value - mov.l 1f, r8 - jmp @r8 - nop .align 2 ENTRY(exception_error) ! #ifdef CONFIG_TRACE_IRQFLAGS - mov.l 3f, r0 + mov.l 2f, r0 jsr @r0 nop #endif sti - mov.l 2f, r0 + mov.l 1f, r0 jmp @r0 nop -! .align 2 -1: .long break_point_trap_software -2: .long do_exception_error +1: .long do_exception_error #ifdef CONFIG_TRACE_IRQFLAGS -3: .long trace_hardirqs_on +2: .long trace_hardirqs_on #endif .align 2 @@ -331,16 +276,31 @@ __restore_all: 1: .long restore_all .align 2 -not_syscall_tra: - bra debug_trap - nop - - .align 2 syscall_badsys: ! Bad syscall number mov #-ENOSYS, r0 bra resume_userspace mov.l r0, @(OFF_R0,r15) ! Return value - + +/* + * The main debug trap handler. + * + * r8=TRA (not the trap number!) + * + * Note: This assumes that the trapa value is left in its original + * form (without the shlr2 shift) so the calculation for the jump + * call table offset remains a simple in place mask. + */ +debug_trap: + mov r8, r0 + and #(0xf << 2), r0 + mov.l 1f, r8 + add r0, r8 + mov.l @r8, r8 + jmp @r8 + nop + + .align 2 +1: .long debug_trap_table /* * Syscall interface: @@ -348,17 +308,19 @@ syscall_badsys: ! Bad syscall number * Syscall #: R3 * Arguments #0 to #3: R4--R7 * Arguments #4 to #6: R0, R1, R2 - * TRA: (number of arguments + 0x10) x 4 + * TRA: (number of arguments + ABI revision) x 4 * * This code also handles delegating other traps to the BIOS/gdb stub * according to: * * Trap number - * (TRA>>2) Purpose - * -------- ------- - * 0x0-0xf old syscall ABI - * 0x10-0x1f new syscall ABI - * 0x20-0xff delegated through debug_trap to BIOS/gdb stub. + * (TRA>>2) Purpose + * -------- ------- + * 0x00-0x0f original SH-3/4 syscall ABI (not in general use). + * 0x10-0x1f general SH-3/4 syscall ABI. + * 0x20-0x2f syscall ABI for SH-2 parts. + * 0x30-0x3f debug traps used by the kernel. + * 0x40-0xff Not supported by all parts, so left unhandled. * * Note: When we're first called, the TRA value must be shifted * right 2 bits in order to get the value that was used as the "trapa" @@ -375,17 +337,22 @@ ret_from_fork: nop .align 2 1: .long schedule_tail - ! + +/* + * The poorly named main trapa decode and dispatch routine, for + * system calls and debug traps through their respective jump tables. + */ ENTRY(system_call) #if !defined(CONFIG_CPU_SH2) mov.l 1f, r9 mov.l @r9, r8 ! Read from TRA (Trap Address) Register #endif - ! - ! Is the trap argument >= 0x20? (TRA will be >= 0x80) - mov #0x7f, r9 + /* + * Check the trap type + */ + mov #((0x20 << 2) - 1), r9 cmp/hi r9, r8 - bt/s not_syscall_tra + bt/s debug_trap ! it's a debug trap.. mov #OFF_TRA, r9 add r15, r9 mov.l r8, @r9 ! set TRA value to tra diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c index 28ec7487de8..66626c03e1e 100644 --- a/arch/sh/kernel/io_generic.c +++ b/arch/sh/kernel/io_generic.c @@ -1,9 +1,8 @@ -/* $Id: io_generic.c,v 1.2 2003/05/04 19:29:53 lethal Exp $ - * - * linux/arch/sh/kernel/io_generic.c +/* + * arch/sh/kernel/io_generic.c * * Copyright (C) 2000 Niibe Yutaka - * Copyright (C) 2005 Paul Mundt + * Copyright (C) 2005 - 2007 Paul Mundt * * Generic I/O routine. These can be used where a machine specific version * is not required. @@ -13,8 +12,9 @@ * for more details. */ #include <linux/module.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/machvec.h> +#include <asm/cacheflush.h> #ifdef CONFIG_CPU_SH3 /* SH3 has a PCMCIA bug that needs a dummy read from area 6 for a @@ -96,6 +96,7 @@ void generic_insw(unsigned long port, void *dst, unsigned long count) while (count--) *buf++ = *port_addr; + flush_dcache_all(); dummy_read(); } @@ -170,6 +171,7 @@ void generic_outsw(unsigned long port, const void *src, unsigned long count) while (count--) *port_addr = *buf++; + flush_dcache_all(); dummy_read(); } diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c index 9c6315f0335..d8927d85492 100644 --- a/arch/sh/kernel/kgdb_stub.c +++ b/arch/sh/kernel/kgdb_stub.c @@ -1323,8 +1323,11 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value) } /* There has been an exception, most likely a breakpoint. */ -void kgdb_handle_exception(struct pt_regs *regs) +asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); int excep_code, vbr_val; int count; int trapa_value = ctrl_inl(TRA); @@ -1368,8 +1371,6 @@ void kgdb_handle_exception(struct pt_regs *regs) vbr_val = trap_registers.vbr; asm("ldc %0, vbr": :"r"(vbr_val)); - - return; } /* Trigger a breakpoint by function */ diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 486c06e1803..9d6a438b3ea 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -1,42 +1,30 @@ -/* $Id: process.c,v 1.28 2004/05/05 16:54:23 lethal Exp $ +/* + * arch/sh/kernel/process.c * - * linux/arch/sh/kernel/process.c + * This file handles the architecture-dependent parts of process handling.. * * Copyright (C) 1995 Linus Torvalds * * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC + * Copyright (C) 2002 - 2006 Paul Mundt */ - -/* - * This file handles the architecture-dependent parts of process handling.. - */ - #include <linux/module.h> -#include <linux/unistd.h> #include <linux/mm.h> #include <linux/elfcore.h> -#include <linux/a.out.h> -#include <linux/slab.h> #include <linux/pm.h> -#include <linux/ptrace.h> #include <linux/kallsyms.h> #include <linux/kexec.h> - -#include <asm/io.h> #include <asm/uaccess.h> #include <asm/mmu_context.h> -#include <asm/elf.h> #include <asm/ubc.h> -static int hlt_counter=0; - +static int hlt_counter; int ubc_usercnt = 0; #define HARD_IDLE_TIMEOUT (HZ / 3) void (*pm_idle)(void); - void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); @@ -44,14 +32,12 @@ void disable_hlt(void) { hlt_counter++; } - EXPORT_SYMBOL(disable_hlt); void enable_hlt(void) { hlt_counter--; } - EXPORT_SYMBOL(enable_hlt); void default_idle(void) @@ -152,19 +138,21 @@ __asm__(".align 5\n" ".align 2\n\t" "1:.long do_exit"); +/* Don't use this in BL=1(cli). Or else, CPU resets! */ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) -{ /* Don't use this in BL=1(cli). Or else, CPU resets! */ +{ struct pt_regs regs; memset(®s, 0, sizeof(regs)); - regs.regs[4] = (unsigned long) arg; - regs.regs[5] = (unsigned long) fn; + regs.regs[4] = (unsigned long)arg; + regs.regs[5] = (unsigned long)fn; - regs.pc = (unsigned long) kernel_thread_helper; + regs.pc = (unsigned long)kernel_thread_helper; regs.sr = (1 << 30); /* Ok, create the new process.. */ - return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, + ®s, 0, NULL, NULL); } /* @@ -211,21 +199,20 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu) return fpvalid; } -/* +/* * Capture the user space registers if the task is not running (in user space) */ int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) { struct pt_regs ptregs; - + ptregs = *task_pt_regs(tsk); elf_core_copy_regs(regs, &ptregs); return 1; } -int -dump_task_fpu (struct task_struct *tsk, elf_fpregset_t *fpu) +int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpu) { int fpvalid = 0; @@ -263,12 +250,14 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, childregs->regs[15] = usp; ti->addr_limit = USER_DS; } else { - childregs->regs[15] = (unsigned long)task_stack_page(p) + THREAD_SIZE; + childregs->regs[15] = (unsigned long)task_stack_page(p) + + THREAD_SIZE; ti->addr_limit = KERNEL_DS; } - if (clone_flags & CLONE_SETTLS) { + + if (clone_flags & CLONE_SETTLS) childregs->gbr = childregs->regs[0]; - } + childregs->regs[0] = 0; /* Set return value for child */ p->thread.sp = (unsigned long) childregs; @@ -280,8 +269,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, } /* Tracing by user break controller. */ -static void -ubc_set_tracing(int asid, unsigned long pc) +static void ubc_set_tracing(int asid, unsigned long pc) { #if defined(CONFIG_CPU_SH4A) unsigned long val; @@ -297,7 +285,7 @@ ubc_set_tracing(int asid, unsigned long pc) val = (UBC_CRR_RES | UBC_CRR_PCB | UBC_CRR_BIE); ctrl_outl(val, UBC_CRR0); - /* Read UBC register that we writed last. For chekking UBC Register changed */ + /* Read UBC register that we wrote last, for checking update */ val = ctrl_inl(UBC_CRR0); #else /* CONFIG_CPU_SH4A */ @@ -305,13 +293,14 @@ ubc_set_tracing(int asid, unsigned long pc) #ifdef CONFIG_MMU /* We don't have any ASID settings for the SH-2! */ - if (cpu_data->type != CPU_SH7604) + if (current_cpu_data.type != CPU_SH7604) ctrl_outb(asid, UBC_BASRA); #endif ctrl_outl(0, UBC_BAMRA); - if (cpu_data->type == CPU_SH7729 || cpu_data->type == CPU_SH7710) { + if (current_cpu_data.type == CPU_SH7729 || + current_cpu_data.type == CPU_SH7710) { ctrl_outw(BBR_INST | BBR_READ | BBR_CPU, UBC_BBRA); ctrl_outl(BRCR_PCBA | BRCR_PCTE, UBC_BRCR); } else { @@ -325,7 +314,8 @@ ubc_set_tracing(int asid, unsigned long pc) * switch_to(x,y) should switch tasks from x to y. * */ -struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *next) +struct task_struct *__switch_to(struct task_struct *prev, + struct task_struct *next) { #if defined(CONFIG_SH_FPU) unlazy_fpu(prev, task_pt_regs(prev)); @@ -354,7 +344,7 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne #ifdef CONFIG_MMU /* * Restore the kernel mode register - * k7 (r7_bank1) + * k7 (r7_bank1) */ asm volatile("ldc %0, r7_bank" : /* no output */ @@ -367,7 +357,7 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne else if (next->thread.ubc_pc && next->mm) { int asid = 0; #ifdef CONFIG_MMU - asid |= next->mm->context.id & MMU_CONTEXT_ASID_MASK; + asid |= cpu_asid(smp_processor_id(), next->mm); #endif ubc_set_tracing(asid, next->thread.ubc_pc); } else { @@ -405,7 +395,8 @@ asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp, if (!newsp) newsp = regs->regs[15]; return do_fork(clone_flags, newsp, regs, 0, - (int __user *)parent_tidptr, (int __user *)child_tidptr); + (int __user *)parent_tidptr, + (int __user *)child_tidptr); } /* @@ -493,9 +484,27 @@ asmlinkage void break_point_trap(void) force_sig(SIGTRAP, current); } -asmlinkage void break_point_trap_software(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs) +/* + * Generic trap handler. + */ +asmlinkage void debug_trap_handler(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) +{ + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + + /* Rewind */ + regs->pc -= 2; + + force_sig(SIGTRAP, current); +} + +/* + * Special handler for BUG() traps. + */ +asmlinkage void bug_trap_handler(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) { struct pt_regs *regs = RELOC_HIDE(&__regs, 0); diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index d6b817aa568..98802ab2821 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -1,14 +1,11 @@ /* - * linux/arch/sh/kernel/setup.c + * arch/sh/kernel/setup.c * - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2002, 2003 Paul Mundt - */ - -/* * This file handles the architecture-dependent parts of initialization + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2002 - 2006 Paul Mundt */ - #include <linux/screen_info.h> #include <linux/ioport.h> #include <linux/init.h> @@ -395,9 +392,9 @@ static const char *cpu_name[] = { [CPU_SH_NONE] = "Unknown" }; -const char *get_cpu_subtype(void) +const char *get_cpu_subtype(struct sh_cpuinfo *c) { - return cpu_name[boot_cpu_data.type]; + return cpu_name[c->type]; } #ifdef CONFIG_PROC_FS @@ -407,19 +404,19 @@ static const char *cpu_flags[] = { "ptea", "llsc", "l2", NULL }; -static void show_cpuflags(struct seq_file *m) +static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c) { unsigned long i; seq_printf(m, "cpu flags\t:"); - if (!cpu_data->flags) { + if (!c->flags) { seq_printf(m, " %s\n", cpu_flags[0]); return; } for (i = 0; cpu_flags[i]; i++) - if ((cpu_data->flags & (1 << i))) + if ((c->flags & (1 << i))) seq_printf(m, " %s", cpu_flags[i+1]); seq_printf(m, "\n"); @@ -441,16 +438,20 @@ static void show_cacheinfo(struct seq_file *m, const char *type, */ static int show_cpuinfo(struct seq_file *m, void *v) { - unsigned int cpu = smp_processor_id(); + struct sh_cpuinfo *c = v; + unsigned int cpu = c - cpu_data; + + if (!cpu_online(cpu)) + return 0; - if (!cpu && cpu_online(cpu)) + if (cpu == 0) seq_printf(m, "machine\t\t: %s\n", get_system_type()); seq_printf(m, "processor\t: %d\n", cpu); seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine); - seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype()); + seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c)); - show_cpuflags(m); + show_cpuflags(m, c); seq_printf(m, "cache type\t: "); @@ -459,22 +460,22 @@ static int show_cpuinfo(struct seq_file *m, void *v) * unified cache on the SH-2 and SH-3, as well as the harvard * style cache on the SH-4. */ - if (boot_cpu_data.icache.flags & SH_CACHE_COMBINED) { + if (c->icache.flags & SH_CACHE_COMBINED) { seq_printf(m, "unified\n"); - show_cacheinfo(m, "cache", boot_cpu_data.icache); + show_cacheinfo(m, "cache", c->icache); } else { seq_printf(m, "split (harvard)\n"); - show_cacheinfo(m, "icache", boot_cpu_data.icache); - show_cacheinfo(m, "dcache", boot_cpu_data.dcache); + show_cacheinfo(m, "icache", c->icache); + show_cacheinfo(m, "dcache", c->dcache); } /* Optional secondary cache */ - if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) - show_cacheinfo(m, "scache", boot_cpu_data.scache); + if (c->flags & CPU_HAS_L2_CACHE) + show_cacheinfo(m, "scache", c->scache); seq_printf(m, "bogomips\t: %lu.%02lu\n", - boot_cpu_data.loops_per_jiffy/(500000/HZ), - (boot_cpu_data.loops_per_jiffy/(5000/HZ)) % 100); + c->loops_per_jiffy/(500000/HZ), + (c->loops_per_jiffy/(5000/HZ)) % 100); return show_clocks(m); } diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c index e6106239a0f..fe1b276c97c 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms.c @@ -105,7 +105,6 @@ EXPORT_SYMBOL(__flush_purge_region); EXPORT_SYMBOL(clear_user_page); #endif -EXPORT_SYMBOL(flush_tlb_page); EXPORT_SYMBOL(__down_trylock); #ifdef CONFIG_SMP diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c index 379c88bf5d9..32f10a03fbb 100644 --- a/arch/sh/kernel/signal.c +++ b/arch/sh/kernel/signal.c @@ -127,7 +127,7 @@ static inline int restore_sigcontext_fpu(struct sigcontext __user *sc) { struct task_struct *tsk = current; - if (!(cpu_data->flags & CPU_HAS_FPU)) + if (!(current_cpu_data.flags & CPU_HAS_FPU)) return 0; set_used_math(); @@ -140,7 +140,7 @@ static inline int save_sigcontext_fpu(struct sigcontext __user *sc, { struct task_struct *tsk = current; - if (!(cpu_data->flags & CPU_HAS_FPU)) + if (!(current_cpu_data.flags & CPU_HAS_FPU)) return 0; if (!used_math()) { @@ -181,7 +181,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p #undef COPY #ifdef CONFIG_SH_FPU - if (cpu_data->flags & CPU_HAS_FPU) { + if (current_cpu_data.flags & CPU_HAS_FPU) { int owned_fp; struct task_struct *tsk = current; diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls.S index ca81976e9e3..38fc8cd3ea3 100644 --- a/arch/sh/kernel/syscalls.S +++ b/arch/sh/kernel/syscalls.S @@ -319,15 +319,15 @@ ENTRY(sys_call_table) .long sys_mq_getsetattr .long sys_kexec_load .long sys_waitid - .long sys_ni_syscall /* 285 */ - .long sys_add_key + .long sys_add_key /* 285 */ .long sys_request_key .long sys_keyctl .long sys_ioprio_set - .long sys_ioprio_get /* 290 */ - .long sys_inotify_init + .long sys_ioprio_get + .long sys_inotify_init /* 290 */ .long sys_inotify_add_watch .long sys_inotify_rm_watch + .long sys_ni_syscall .long sys_migrate_pages .long sys_openat /* 295 */ .long sys_mkdirat diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index ec110157992..e9f168f60f9 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -156,13 +156,13 @@ static inline void do_bug_verbose(struct pt_regs *regs) { } #endif /* CONFIG_DEBUG_BUGVERBOSE */ -#endif /* CONFIG_BUG */ void handle_BUG(struct pt_regs *regs) { do_bug_verbose(regs); die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff); } +#endif /* CONFIG_BUG */ /* * handle an instruction that does an unaligned memory access by emulating the @@ -641,7 +641,7 @@ int is_dsp_inst(struct pt_regs *regs) * Safe guard if DSP mode is already enabled or we're lacking * the DSP altogether. */ - if (!(cpu_data->flags & CPU_HAS_DSP) || (regs->sr & SR_DSP)) + if (!(current_cpu_data.flags & CPU_HAS_DSP) || (regs->sr & SR_DSP)) return 0; get_user(inst, ((unsigned short *) regs->pc)); diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 29f4ee35c6d..6b0d28ac924 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -20,7 +20,7 @@ config CPU_SH4 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB - select CPU_HAS_PTEA if !CPU_SUBTYPE_ST40 + select CPU_HAS_PTEA if (!CPU_SUBTYPE_ST40 && !CPU_SH4A) || CPU_SHX2 config CPU_SH4A bool @@ -72,6 +72,7 @@ config CPU_SUBTYPE_SH7705 config CPU_SUBTYPE_SH7706 bool "Support SH7706 processor" select CPU_SH3 + select CPU_HAS_IPR_IRQ help Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU. @@ -92,6 +93,7 @@ config CPU_SUBTYPE_SH7708 config CPU_SUBTYPE_SH7709 bool "Support SH7709 processor" select CPU_SH3 + select CPU_HAS_IPR_IRQ select CPU_HAS_PINT_IRQ help Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU. @@ -149,6 +151,7 @@ config CPU_SUBTYPE_SH7760 bool "Support SH7760 processor" select CPU_SH4 select CPU_HAS_INTC2_IRQ + select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH4_202 bool "Support SH4-202 processor" diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c index 909dcfa8c8c..de6d2c9aa47 100644 --- a/arch/sh/mm/cache-debugfs.c +++ b/arch/sh/mm/cache-debugfs.c @@ -46,10 +46,10 @@ static int cache_seq_show(struct seq_file *file, void *iter) if (cache_type == CACHE_TYPE_DCACHE) { base = CACHE_OC_ADDRESS_ARRAY; - cache = &cpu_data->dcache; + cache = ¤t_cpu_data.dcache; } else { base = CACHE_IC_ADDRESS_ARRAY; - cache = &cpu_data->icache; + cache = ¤t_cpu_data.icache; } /* diff --git a/arch/sh/mm/cache-sh3.c b/arch/sh/mm/cache-sh3.c index 838731fc608..6d1dbec08ad 100644 --- a/arch/sh/mm/cache-sh3.c +++ b/arch/sh/mm/cache-sh3.c @@ -44,11 +44,11 @@ void __flush_wback_region(void *start, int size) for (v = begin; v < end; v+=L1_CACHE_BYTES) { unsigned long addrstart = CACHE_OC_ADDRESS_ARRAY; - for (j = 0; j < cpu_data->dcache.ways; j++) { + for (j = 0; j < current_cpu_data.dcache.ways; j++) { unsigned long data, addr, p; p = __pa(v); - addr = addrstart | (v & cpu_data->dcache.entry_mask); + addr = addrstart | (v & current_cpu_data.dcache.entry_mask); local_irq_save(flags); data = ctrl_inl(addr); @@ -60,7 +60,7 @@ void __flush_wback_region(void *start, int size) break; } local_irq_restore(flags); - addrstart += cpu_data->dcache.way_incr; + addrstart += current_cpu_data.dcache.way_incr; } } } @@ -85,7 +85,7 @@ void __flush_purge_region(void *start, int size) data = (v & 0xfffffc00); /* _Virtual_ address, ~U, ~V */ addr = CACHE_OC_ADDRESS_ARRAY | - (v & cpu_data->dcache.entry_mask) | SH_CACHE_ASSOC; + (v & current_cpu_data.dcache.entry_mask) | SH_CACHE_ASSOC; ctrl_outl(data, addr); } } diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index c6955157c98..e0cd4b7f4ae 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -54,21 +54,21 @@ static void __init emit_cache_params(void) ctrl_inl(CCN_CVR), ctrl_inl(CCN_PRR)); printk("I-cache : n_ways=%d n_sets=%d way_incr=%d\n", - cpu_data->icache.ways, - cpu_data->icache.sets, - cpu_data->icache.way_incr); + current_cpu_data.icache.ways, + current_cpu_data.icache.sets, + current_cpu_data.icache.way_incr); printk("I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", - cpu_data->icache.entry_mask, - cpu_data->icache.alias_mask, - cpu_data->icache.n_aliases); + current_cpu_data.icache.entry_mask, + current_cpu_data.icache.alias_mask, + current_cpu_data.icache.n_aliases); printk("D-cache : n_ways=%d n_sets=%d way_incr=%d\n", - cpu_data->dcache.ways, - cpu_data->dcache.sets, - cpu_data->dcache.way_incr); + current_cpu_data.dcache.ways, + current_cpu_data.dcache.sets, + current_cpu_data.dcache.way_incr); printk("D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", - cpu_data->dcache.entry_mask, - cpu_data->dcache.alias_mask, - cpu_data->dcache.n_aliases); + current_cpu_data.dcache.entry_mask, + current_cpu_data.dcache.alias_mask, + current_cpu_data.dcache.n_aliases); if (!__flush_dcache_segment_fn) panic("unknown number of cache ways\n"); @@ -87,10 +87,10 @@ void __init p3_cache_init(void) { int i; - compute_alias(&cpu_data->icache); - compute_alias(&cpu_data->dcache); + compute_alias(¤t_cpu_data.icache); + compute_alias(¤t_cpu_data.dcache); - switch (cpu_data->dcache.ways) { + switch (current_cpu_data.dcache.ways) { case 1: __flush_dcache_segment_fn = __flush_dcache_segment_1way; break; @@ -110,7 +110,7 @@ void __init p3_cache_init(void) if (ioremap_page_range(P3SEG, P3SEG + (PAGE_SIZE * 4), 0, PAGE_KERNEL)) panic("%s failed.", __FUNCTION__); - for (i = 0; i < cpu_data->dcache.n_aliases; i++) + for (i = 0; i < current_cpu_data.dcache.n_aliases; i++) mutex_init(&p3map_mutex[i]); } @@ -200,13 +200,14 @@ void flush_cache_sigtramp(unsigned long addr) : /* no output */ : "m" (__m(v))); - index = CACHE_IC_ADDRESS_ARRAY | (v & cpu_data->icache.entry_mask); + index = CACHE_IC_ADDRESS_ARRAY | + (v & current_cpu_data.icache.entry_mask); local_irq_save(flags); jump_to_P2(); - for (i = 0; i < cpu_data->icache.ways; - i++, index += cpu_data->icache.way_incr) + for (i = 0; i < current_cpu_data.icache.ways; + i++, index += current_cpu_data.icache.way_incr) ctrl_outl(0, index); /* Clear out Valid-bit */ back_to_P1(); @@ -223,7 +224,7 @@ static inline void flush_cache_4096(unsigned long start, * All types of SH-4 require PC to be in P2 to operate on the I-cache. * Some types of SH-4 require PC to be in P2 to operate on the D-cache. */ - if ((cpu_data->flags & CPU_HAS_P2_FLUSH_BUG) || + if ((current_cpu_data.flags & CPU_HAS_P2_FLUSH_BUG) || (start < CACHE_OC_ADDRESS_ARRAY)) exec_offset = 0x20000000; @@ -236,16 +237,26 @@ static inline void flush_cache_4096(unsigned long start, /* * Write back & invalidate the D-cache of the page. * (To avoid "alias" issues) + * + * This uses a lazy write-back on UP, which is explicitly + * disabled on SMP. */ void flush_dcache_page(struct page *page) { - if (test_bit(PG_mapped, &page->flags)) { +#ifndef CONFIG_SMP + struct address_space *mapping = page_mapping(page); + + if (mapping && !mapping_mapped(mapping)) + set_bit(PG_dcache_dirty, &page->flags); + else +#endif + { unsigned long phys = PHYSADDR(page_address(page)); unsigned long addr = CACHE_OC_ADDRESS_ARRAY; int i, n; /* Loop all the D-cache */ - n = cpu_data->dcache.n_aliases; + n = current_cpu_data.dcache.n_aliases; for (i = 0; i < n; i++, addr += 4096) flush_cache_4096(addr, phys); } @@ -277,7 +288,7 @@ static inline void flush_icache_all(void) void flush_dcache_all(void) { - (*__flush_dcache_segment_fn)(0UL, cpu_data->dcache.way_size); + (*__flush_dcache_segment_fn)(0UL, current_cpu_data.dcache.way_size); wmb(); } @@ -291,8 +302,8 @@ static void __flush_cache_mm(struct mm_struct *mm, unsigned long start, unsigned long end) { unsigned long d = 0, p = start & PAGE_MASK; - unsigned long alias_mask = cpu_data->dcache.alias_mask; - unsigned long n_aliases = cpu_data->dcache.n_aliases; + unsigned long alias_mask = current_cpu_data.dcache.alias_mask; + unsigned long n_aliases = current_cpu_data.dcache.n_aliases; unsigned long select_bit; unsigned long all_aliases_mask; unsigned long addr_offset; @@ -379,7 +390,7 @@ void flush_cache_mm(struct mm_struct *mm) * If cache is only 4k-per-way, there are never any 'aliases'. Since * the cache is physically tagged, the data can just be left in there. */ - if (cpu_data->dcache.n_aliases == 0) + if (current_cpu_data.dcache.n_aliases == 0) return; /* @@ -416,7 +427,7 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long address, unsigned long phys = pfn << PAGE_SHIFT; unsigned int alias_mask; - alias_mask = cpu_data->dcache.alias_mask; + alias_mask = current_cpu_data.dcache.alias_mask; /* We only need to flush D-cache when we have alias */ if ((address^phys) & alias_mask) { @@ -430,7 +441,7 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long address, phys); } - alias_mask = cpu_data->icache.alias_mask; + alias_mask = current_cpu_data.icache.alias_mask; if (vma->vm_flags & VM_EXEC) { /* * Evict entries from the portion of the cache from which code @@ -462,7 +473,7 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, * If cache is only 4k-per-way, there are never any 'aliases'. Since * the cache is physically tagged, the data can just be left in there. */ - if (cpu_data->dcache.n_aliases == 0) + if (current_cpu_data.dcache.n_aliases == 0) return; /* @@ -523,7 +534,7 @@ static void __flush_cache_4096(unsigned long addr, unsigned long phys, unsigned long a, ea, p; unsigned long temp_pc; - dcache = &cpu_data->dcache; + dcache = ¤t_cpu_data.dcache; /* Write this way for better assembly. */ way_count = dcache->ways; way_incr = dcache->way_incr; @@ -598,7 +609,7 @@ static void __flush_dcache_segment_1way(unsigned long start, base_addr = ((base_addr >> 16) << 16); base_addr |= start; - dcache = &cpu_data->dcache; + dcache = ¤t_cpu_data.dcache; linesz = dcache->linesz; way_incr = dcache->way_incr; way_size = dcache->way_size; @@ -640,7 +651,7 @@ static void __flush_dcache_segment_2way(unsigned long start, base_addr = ((base_addr >> 16) << 16); base_addr |= start; - dcache = &cpu_data->dcache; + dcache = ¤t_cpu_data.dcache; linesz = dcache->linesz; way_incr = dcache->way_incr; way_size = dcache->way_size; @@ -699,7 +710,7 @@ static void __flush_dcache_segment_4way(unsigned long start, base_addr = ((base_addr >> 16) << 16); base_addr |= start; - dcache = &cpu_data->dcache; + dcache = ¤t_cpu_data.dcache; linesz = dcache->linesz; way_incr = dcache->way_incr; way_size = dcache->way_size; diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c index 045abdf078f..31f8deb7a15 100644 --- a/arch/sh/mm/cache-sh7705.c +++ b/arch/sh/mm/cache-sh7705.c @@ -3,11 +3,11 @@ * * Copyright (C) 1999, 2000 Niibe Yutaka * Copyright (C) 2004 Alex Song + * Copyright (C) 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. - * */ #include <linux/init.h> #include <linux/mman.h> @@ -32,9 +32,9 @@ static inline void cache_wback_all(void) { unsigned long ways, waysize, addrstart; - ways = cpu_data->dcache.ways; - waysize = cpu_data->dcache.sets; - waysize <<= cpu_data->dcache.entry_shift; + ways = current_cpu_data.dcache.ways; + waysize = current_cpu_data.dcache.sets; + waysize <<= current_cpu_data.dcache.entry_shift; addrstart = CACHE_OC_ADDRESS_ARRAY; @@ -43,7 +43,7 @@ static inline void cache_wback_all(void) for (addr = addrstart; addr < addrstart + waysize; - addr += cpu_data->dcache.linesz) { + addr += current_cpu_data.dcache.linesz) { unsigned long data; int v = SH_CACHE_UPDATED | SH_CACHE_VALID; @@ -51,10 +51,9 @@ static inline void cache_wback_all(void) if ((data & v) == v) ctrl_outl(data & ~v, addr); - } - addrstart += cpu_data->dcache.way_incr; + addrstart += current_cpu_data.dcache.way_incr; } while (--ways); } @@ -94,9 +93,9 @@ static void __flush_dcache_page(unsigned long phys) local_irq_save(flags); jump_to_P2(); - ways = cpu_data->dcache.ways; - waysize = cpu_data->dcache.sets; - waysize <<= cpu_data->dcache.entry_shift; + ways = current_cpu_data.dcache.ways; + waysize = current_cpu_data.dcache.sets; + waysize <<= current_cpu_data.dcache.entry_shift; addrstart = CACHE_OC_ADDRESS_ARRAY; @@ -105,7 +104,7 @@ static void __flush_dcache_page(unsigned long phys) for (addr = addrstart; addr < addrstart + waysize; - addr += cpu_data->dcache.linesz) { + addr += current_cpu_data.dcache.linesz) { unsigned long data; data = ctrl_inl(addr) & (0x1ffffC00 | SH_CACHE_VALID); @@ -115,7 +114,7 @@ static void __flush_dcache_page(unsigned long phys) } } - addrstart += cpu_data->dcache.way_incr; + addrstart += current_cpu_data.dcache.way_incr; } while (--ways); back_to_P1(); @@ -128,7 +127,11 @@ static void __flush_dcache_page(unsigned long phys) */ void flush_dcache_page(struct page *page) { - if (test_bit(PG_mapped, &page->flags)) + struct address_space *mapping = page_mapping(page); + + if (mapping && !mapping_mapped(mapping)) + set_bit(PG_dcache_dirty, &page->flags); + else __flush_dcache_page(PHYSADDR(page_address(page))); } diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index 716ebf568af..fa5d7f0b9f1 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -17,6 +17,7 @@ #include <linux/kprobes.h> #include <asm/system.h> #include <asm/mmu_context.h> +#include <asm/tlbflush.h> #include <asm/kgdb.h> extern void die(const char *,struct pt_regs *,long); @@ -224,3 +225,89 @@ do_sigbus: if (!user_mode(regs)) goto no_context; } + +#ifdef CONFIG_SH_STORE_QUEUES +/* + * This is a special case for the SH-4 store queues, as pages for this + * space still need to be faulted in before it's possible to flush the + * store queue cache for writeout to the remapped region. + */ +#define P3_ADDR_MAX (P4SEG_STORE_QUE + 0x04000000) +#else +#define P3_ADDR_MAX P4SEG +#endif + +/* + * Called with interrupts disabled. + */ +asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs, + unsigned long writeaccess, + unsigned long address) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + pte_t entry; + struct mm_struct *mm = current->mm; + spinlock_t *ptl; + int ret = 1; + +#ifdef CONFIG_SH_KGDB + if (kgdb_nofault && kgdb_bus_err_hook) + kgdb_bus_err_hook(); +#endif + + /* + * We don't take page faults for P1, P2, and parts of P4, these + * are always mapped, whether it be due to legacy behaviour in + * 29-bit mode, or due to PMB configuration in 32-bit mode. + */ + if (address >= P3SEG && address < P3_ADDR_MAX) { + pgd = pgd_offset_k(address); + mm = NULL; + } else { + if (unlikely(address >= TASK_SIZE || !mm)) + return 1; + + pgd = pgd_offset(mm, address); + } + + pud = pud_offset(pgd, address); + if (pud_none_or_clear_bad(pud)) + return 1; + pmd = pmd_offset(pud, address); + if (pmd_none_or_clear_bad(pmd)) + return 1; + + if (mm) + pte = pte_offset_map_lock(mm, pmd, address, &ptl); + else + pte = pte_offset_kernel(pmd, address); + + entry = *pte; + if (unlikely(pte_none(entry) || pte_not_present(entry))) + goto unlock; + if (unlikely(writeaccess && !pte_write(entry))) + goto unlock; + + if (writeaccess) + entry = pte_mkdirty(entry); + entry = pte_mkyoung(entry); + +#ifdef CONFIG_CPU_SH4 + /* + * ITLB is not affected by "ldtlb" instruction. + * So, we need to flush the entry by ourselves. + */ + local_flush_tlb_one(get_asid(), address & PAGE_MASK); +#endif + + set_pte(pte, entry); + update_mmu_cache(NULL, address, entry); + ret = 0; +unlock: + if (mm) + pte_unmap_unlock(pte, ptl); + return ret; +} diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index bf0c263cb6f..ae957a93237 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -39,11 +39,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); pgd_t swapper_pg_dir[PTRS_PER_PGD]; -/* - * Cache of MMU context last used. - */ -unsigned long mmu_context_cache = NO_CONTEXT; - #ifdef CONFIG_MMU /* It'd be good if these lines were in the standard header file. */ #define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT) @@ -111,7 +106,7 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot)); - __flush_tlb_page(get_asid(), addr); + flush_tlb_one(get_asid(), addr); } /* diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c index 90b494a0cf4..be03d74e99c 100644 --- a/arch/sh/mm/ioremap.c +++ b/arch/sh/mm/ioremap.c @@ -45,12 +45,6 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, return NULL; /* - * Don't remap the low PCI/ISA area, it's always mapped.. - */ - if (phys_addr >= 0xA0000 && last_addr < 0x100000) - return (void __iomem *)phys_to_virt(phys_addr); - - /* * If we're on an SH7751 or SH7780 PCI controller, PCI memory is * mapped at the end of the address space (typically 0xfd000000) * in a non-translatable area, so mapping through page tables for diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index 3f98d2a4f93..969efeceb92 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -13,7 +13,7 @@ extern struct mutex p3map_mutex[]; -#define CACHE_ALIAS (cpu_data->dcache.alias_mask) +#define CACHE_ALIAS (current_cpu_data.dcache.alias_mask) /* * clear_user_page @@ -23,7 +23,6 @@ extern struct mutex p3map_mutex[]; */ void clear_user_page(void *to, unsigned long address, struct page *page) { - __set_bit(PG_mapped, &page->flags); if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) clear_page(to); else { @@ -40,7 +39,7 @@ void clear_user_page(void *to, unsigned long address, struct page *page) mutex_lock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); set_pte(pte, entry); local_irq_save(flags); - __flush_tlb_page(get_asid(), p3_addr); + flush_tlb_one(get_asid(), p3_addr); local_irq_restore(flags); update_mmu_cache(NULL, p3_addr, entry); __clear_user_page((void *)p3_addr, to); @@ -59,7 +58,6 @@ void clear_user_page(void *to, unsigned long address, struct page *page) void copy_user_page(void *to, void *from, unsigned long address, struct page *page) { - __set_bit(PG_mapped, &page->flags); if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) copy_page(to, from); else { @@ -76,7 +74,7 @@ void copy_user_page(void *to, void *from, unsigned long address, mutex_lock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); set_pte(pte, entry); local_irq_save(flags); - __flush_tlb_page(get_asid(), p3_addr); + flush_tlb_one(get_asid(), p3_addr); local_irq_restore(flags); update_mmu_cache(NULL, p3_addr, entry); __copy_user_page((void *)p3_addr, from, to); @@ -84,23 +82,3 @@ void copy_user_page(void *to, void *from, unsigned long address, mutex_unlock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); } } - -/* - * For SH-4, we have our own implementation for ptep_get_and_clear - */ -inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - pte_t pte = *ptep; - - pte_clear(mm, addr, ptep); - if (!pte_not_present(pte)) { - unsigned long pfn = pte_pfn(pte); - if (pfn_valid(pfn)) { - struct page *page = pfn_to_page(pfn); - struct address_space *mapping = page_mapping(page); - if (!mapping || !mapping_writably_mapped(mapping)) - __clear_bit(PG_mapped, &page->flags); - } - } - return pte; -} diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c index ff9ece986cb..887ab9d18cc 100644 --- a/arch/sh/mm/pg-sh7705.c +++ b/arch/sh/mm/pg-sh7705.c @@ -7,9 +7,7 @@ * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. - * */ - #include <linux/init.h> #include <linux/mman.h> #include <linux/mm.h> @@ -45,13 +43,13 @@ static inline void __flush_purge_virtual_region(void *p1, void *virt, int size) p = __pa(p1_begin); - ways = cpu_data->dcache.ways; + ways = current_cpu_data.dcache.ways; addr = CACHE_OC_ADDRESS_ARRAY; do { unsigned long data; - addr |= (v & cpu_data->dcache.entry_mask); + addr |= (v & current_cpu_data.dcache.entry_mask); data = ctrl_inl(addr); if ((data & CACHE_PHYSADDR_MASK) == @@ -60,7 +58,7 @@ static inline void __flush_purge_virtual_region(void *p1, void *virt, int size) ctrl_outl(data, addr); } - addr += cpu_data->dcache.way_incr; + addr += current_cpu_data.dcache.way_incr; } while (--ways); p1_begin += L1_CACHE_BYTES; @@ -76,7 +74,6 @@ void clear_user_page(void *to, unsigned long address, struct page *pg) { struct page *page = virt_to_page(to); - __set_bit(PG_mapped, &page->flags); if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) { clear_page(to); __flush_wback_region(to, PAGE_SIZE); @@ -95,12 +92,11 @@ void clear_user_page(void *to, unsigned long address, struct page *pg) * @from: P1 address * @address: U0 address to be mapped */ -void copy_user_page(void *to, void *from, unsigned long address, struct page *pg) +void copy_user_page(void *to, void *from, unsigned long address, + struct page *pg) { struct page *page = virt_to_page(to); - - __set_bit(PG_mapped, &page->flags); if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) { copy_page(to, from); __flush_wback_region(to, PAGE_SIZE); @@ -112,26 +108,3 @@ void copy_user_page(void *to, void *from, unsigned long address, struct page *pg __flush_wback_region(to, PAGE_SIZE); } } - -/* - * For SH7705, we have our own implementation for ptep_get_and_clear - * Copied from pg-sh4.c - */ -inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - pte_t pte = *ptep; - - pte_clear(mm, addr, ptep); - if (!pte_not_present(pte)) { - unsigned long pfn = pte_pfn(pte); - if (pfn_valid(pfn)) { - struct page *page = pfn_to_page(pfn); - struct address_space *mapping = page_mapping(page); - if (!mapping || !mapping_writably_mapped(mapping)) - __clear_bit(PG_mapped, &page->flags); - } - } - - return pte; -} - diff --git a/arch/sh/mm/tlb-flush.c b/arch/sh/mm/tlb-flush.c index 73ec7f6084f..d2f7b4a2eb0 100644 --- a/arch/sh/mm/tlb-flush.c +++ b/arch/sh/mm/tlb-flush.c @@ -2,24 +2,28 @@ * TLB flushing operations for SH with an MMU. * * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include <linux/mm.h> +#include <linux/io.h> #include <asm/mmu_context.h> #include <asm/tlbflush.h> +#include <asm/cacheflush.h> -void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) +void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) { - if (vma->vm_mm && vma->vm_mm->context.id != NO_CONTEXT) { + unsigned int cpu = smp_processor_id(); + + if (vma->vm_mm && cpu_context(cpu, vma->vm_mm) != NO_CONTEXT) { unsigned long flags; unsigned long asid; unsigned long saved_asid = MMU_NO_ASID; - asid = vma->vm_mm->context.id & MMU_CONTEXT_ASID_MASK; + asid = cpu_asid(cpu, vma->vm_mm); page &= PAGE_MASK; local_irq_save(flags); @@ -27,33 +31,34 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) saved_asid = get_asid(); set_asid(asid); } - __flush_tlb_page(asid, page); + local_flush_tlb_one(asid, page); if (saved_asid != MMU_NO_ASID) set_asid(saved_asid); local_irq_restore(flags); } } -void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end) +void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) { struct mm_struct *mm = vma->vm_mm; + unsigned int cpu = smp_processor_id(); - if (mm->context.id != NO_CONTEXT) { + if (cpu_context(cpu, mm) != NO_CONTEXT) { unsigned long flags; int size; local_irq_save(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */ - mm->context.id = NO_CONTEXT; + cpu_context(cpu, mm) = NO_CONTEXT; if (mm == current->mm) - activate_context(mm); + activate_context(mm, cpu); } else { unsigned long asid; unsigned long saved_asid = MMU_NO_ASID; - asid = mm->context.id & MMU_CONTEXT_ASID_MASK; + asid = cpu_asid(cpu, mm); start &= PAGE_MASK; end += (PAGE_SIZE - 1); end &= PAGE_MASK; @@ -62,7 +67,7 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, set_asid(asid); } while (start < end) { - __flush_tlb_page(asid, start); + local_flush_tlb_one(asid, start); start += PAGE_SIZE; } if (saved_asid != MMU_NO_ASID) @@ -72,26 +77,27 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, } } -void flush_tlb_kernel_range(unsigned long start, unsigned long end) +void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { + unsigned int cpu = smp_processor_id(); unsigned long flags; int size; local_irq_save(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; if (size > (MMU_NTLB_ENTRIES/4)) { /* Too many TLB to flush */ - flush_tlb_all(); + local_flush_tlb_all(); } else { unsigned long asid; unsigned long saved_asid = get_asid(); - asid = init_mm.context.id & MMU_CONTEXT_ASID_MASK; + asid = cpu_asid(cpu, &init_mm); start &= PAGE_MASK; end += (PAGE_SIZE - 1); end &= PAGE_MASK; set_asid(asid); while (start < end) { - __flush_tlb_page(asid, start); + local_flush_tlb_one(asid, start); start += PAGE_SIZE; } set_asid(saved_asid); @@ -99,22 +105,24 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) local_irq_restore(flags); } -void flush_tlb_mm(struct mm_struct *mm) +void local_flush_tlb_mm(struct mm_struct *mm) { + unsigned int cpu = smp_processor_id(); + /* Invalidate all TLB of this process. */ /* Instead of invalidating each TLB, we get new MMU context. */ - if (mm->context.id != NO_CONTEXT) { + if (cpu_context(cpu, mm) != NO_CONTEXT) { unsigned long flags; local_irq_save(flags); - mm->context.id = NO_CONTEXT; + cpu_context(cpu, mm) = NO_CONTEXT; if (mm == current->mm) - activate_context(mm); + activate_context(mm, cpu); local_irq_restore(flags); } } -void flush_tlb_all(void) +void local_flush_tlb_all(void) { unsigned long flags, status; @@ -132,3 +140,54 @@ void flush_tlb_all(void) ctrl_barrier(); local_irq_restore(flags); } + +void update_mmu_cache(struct vm_area_struct *vma, + unsigned long address, pte_t pte) +{ + unsigned long flags; + unsigned long pteval; + unsigned long vpn; + struct page *page; + unsigned long pfn = pte_pfn(pte); + struct address_space *mapping; + + if (!pfn_valid(pfn)) + return; + + page = pfn_to_page(pfn); + mapping = page_mapping(page); + if (mapping) { + unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; + int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags); + + if (dirty) + __flush_wback_region((void *)P1SEGADDR(phys), + PAGE_SIZE); + } + + local_irq_save(flags); + + /* Set PTEH register */ + vpn = (address & MMU_VPN_MASK) | get_asid(); + ctrl_outl(vpn, MMU_PTEH); + + pteval = pte_val(pte); + +#ifdef CONFIG_CPU_HAS_PTEA + /* Set PTEA register */ + /* TODO: make this look less hacky */ + ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA); +#endif + + /* Set PTEL register */ + pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ +#if defined(CONFIG_SH_WRITETHROUGH) && defined(CONFIG_CPU_SH4) + pteval |= _PAGE_WT; +#endif + /* conveniently, we want all the software flags to be 0 anyway */ + ctrl_outl(pteval, MMU_PTEL); + + /* Load the TLB */ + asm volatile("ldtlb": /* no output */ : /* no input */ : "memory"); + local_irq_restore(flags); +} diff --git a/arch/sh/mm/tlb-nommu.c b/arch/sh/mm/tlb-nommu.c index e55cfea0109..1ccca7c0532 100644 --- a/arch/sh/mm/tlb-nommu.c +++ b/arch/sh/mm/tlb-nommu.c @@ -13,39 +13,33 @@ /* * Nothing too terribly exciting here .. */ - -void flush_tlb(void) -{ - BUG(); -} - -void flush_tlb_all(void) +void local_flush_tlb_all(void) { BUG(); } -void flush_tlb_mm(struct mm_struct *mm) +void local_flush_tlb_mm(struct mm_struct *mm) { BUG(); } -void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, +void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { BUG(); } -void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) +void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) { BUG(); } -void __flush_tlb_page(unsigned long asid, unsigned long page) +void local_flush_tlb_one(unsigned long asid, unsigned long page) { BUG(); } -void flush_tlb_kernel_range(unsigned long start, unsigned long end) +void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { BUG(); } @@ -55,4 +49,3 @@ void update_mmu_cache(struct vm_area_struct * vma, { BUG(); } - diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c index 46b09e26e08..e5e76eb7ee0 100644 --- a/arch/sh/mm/tlb-sh3.c +++ b/arch/sh/mm/tlb-sh3.c @@ -8,71 +8,11 @@ * * Released under the terms of the GNU GPL v2.0. */ -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/interrupt.h> - +#include <linux/io.h> #include <asm/system.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/pgalloc.h> #include <asm/mmu_context.h> -#include <asm/cacheflush.h> -void update_mmu_cache(struct vm_area_struct * vma, - unsigned long address, pte_t pte) -{ - unsigned long flags; - unsigned long pteval; - unsigned long vpn; - - /* Ptrace may call this routine. */ - if (vma && current->active_mm != vma->vm_mm) - return; - -#if defined(CONFIG_SH7705_CACHE_32KB) - { - struct page *page = pte_page(pte); - unsigned long pfn = pte_pfn(pte); - - if (pfn_valid(pfn) && !test_bit(PG_mapped, &page->flags)) { - unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; - - __flush_wback_region((void *)P1SEGADDR(phys), - PAGE_SIZE); - __set_bit(PG_mapped, &page->flags); - } - } -#endif - - local_irq_save(flags); - - /* Set PTEH register */ - vpn = (address & MMU_VPN_MASK) | get_asid(); - ctrl_outl(vpn, MMU_PTEH); - - pteval = pte_val(pte); - - /* Set PTEL register */ - pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ - /* conveniently, we want all the software flags to be 0 anyway */ - ctrl_outl(pteval, MMU_PTEL); - - /* Load the TLB */ - asm volatile("ldtlb": /* no output */ : /* no input */ : "memory"); - local_irq_restore(flags); -} - -void __flush_tlb_page(unsigned long asid, unsigned long page) +void local_flush_tlb_one(unsigned long asid, unsigned long page) { unsigned long addr, data; int i, ways = MMU_NTLB_WAYS; @@ -86,7 +26,7 @@ void __flush_tlb_page(unsigned long asid, unsigned long page) addr = MMU_TLB_ADDRESS_ARRAY | (page & 0x1F000); data = (page & 0xfffe0000) | asid; /* VALID bit is off */ - if ((cpu_data->flags & CPU_HAS_MMU_PAGE_ASSOC)) { + if ((current_cpu_data.flags & CPU_HAS_MMU_PAGE_ASSOC)) { addr |= MMU_PAGE_ASSOC_BIT; ways = 1; /* we already know the way .. */ } @@ -94,4 +34,3 @@ void __flush_tlb_page(unsigned long asid, unsigned long page) for (i = 0; i < ways; i++) ctrl_outl(data, addr + (i << 8)); } - diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c index 812b2d567de..221e7095473 100644 --- a/arch/sh/mm/tlb-sh4.c +++ b/arch/sh/mm/tlb-sh4.c @@ -8,76 +8,11 @@ * * Released under the terms of the GNU GPL v2.0. */ -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/interrupt.h> - +#include <linux/io.h> #include <asm/system.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/pgalloc.h> #include <asm/mmu_context.h> -#include <asm/cacheflush.h> -void update_mmu_cache(struct vm_area_struct * vma, - unsigned long address, pte_t pte) -{ - unsigned long flags; - unsigned long pteval; - unsigned long vpn; - struct page *page; - unsigned long pfn; - - /* Ptrace may call this routine. */ - if (vma && current->active_mm != vma->vm_mm) - return; - - pfn = pte_pfn(pte); - if (pfn_valid(pfn)) { - page = pfn_to_page(pfn); - if (!test_bit(PG_mapped, &page->flags)) { - unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; - __flush_wback_region((void *)P1SEGADDR(phys), PAGE_SIZE); - __set_bit(PG_mapped, &page->flags); - } - } - - local_irq_save(flags); - - /* Set PTEH register */ - vpn = (address & MMU_VPN_MASK) | get_asid(); - ctrl_outl(vpn, MMU_PTEH); - - pteval = pte_val(pte); - - /* Set PTEA register */ - if (cpu_data->flags & CPU_HAS_PTEA) - /* TODO: make this look less hacky */ - ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA); - - /* Set PTEL register */ - pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ -#ifdef CONFIG_SH_WRITETHROUGH - pteval |= _PAGE_WT; -#endif - /* conveniently, we want all the software flags to be 0 anyway */ - ctrl_outl(pteval, MMU_PTEL); - - /* Load the TLB */ - asm volatile("ldtlb": /* no output */ : /* no input */ : "memory"); - local_irq_restore(flags); -} - -void __flush_tlb_page(unsigned long asid, unsigned long page) +void local_flush_tlb_one(unsigned long asid, unsigned long page) { unsigned long addr, data; @@ -93,4 +28,3 @@ void __flush_tlb_page(unsigned long asid, unsigned long page) ctrl_outl(data, addr); back_to_P1(); } - diff --git a/arch/sh/oprofile/op_model_sh7750.c b/arch/sh/oprofile/op_model_sh7750.c index 0104e44bc76..ebee7e24ede 100644 --- a/arch/sh/oprofile/op_model_sh7750.c +++ b/arch/sh/oprofile/op_model_sh7750.c @@ -259,7 +259,7 @@ static struct oprofile_operations sh7750_perf_counter_ops = { int __init oprofile_arch_init(struct oprofile_operations **ops) { - if (!(cpu_data->flags & CPU_HAS_PERF_COUNTER)) + if (!(current_cpu_data.flags & CPU_HAS_PERF_COUNTER)) return -ENODEV; sh7750_perf_counter_ops.cpu_type = (char *)get_cpu_subtype(); diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 0571755e9a8..4fe0f94cbf4 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -16,7 +16,6 @@ HD64461 HD64461 HD64465 HD64465 SATURN SH_SATURN DREAMCAST SH_DREAMCAST -BIGSUR SH_BIGSUR MPC1211 SH_MPC1211 SNAPGEAR SH_SECUREEDGE5410 HS7751RVOIP SH_HS7751RVOIP diff --git a/arch/sh64/kernel/traps.c b/arch/sh64/kernel/traps.c index 224b7f5b922..c346d7ef928 100644 --- a/arch/sh64/kernel/traps.c +++ b/arch/sh64/kernel/traps.c @@ -910,30 +910,57 @@ static int misaligned_fixup(struct pt_regs *regs) } static ctl_table unaligned_table[] = { - {1, "kernel_reports", &kernel_mode_unaligned_fixup_count, - sizeof(int), 0644, NULL, &proc_dointvec}, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "kernel_reports", + .data = &kernel_mode_unaligned_fixup_count, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec + }, #if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) - {2, "user_reports", &user_mode_unaligned_fixup_count, - sizeof(int), 0644, NULL, &proc_dointvec}, - {3, "user_enable", &user_mode_unaligned_fixup_enable, - sizeof(int), 0644, NULL, &proc_dointvec}, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "user_reports", + .data = &user_mode_unaligned_fixup_count, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "user_enable", + .data = &user_mode_unaligned_fixup_enable, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec}, #endif - {0} + {} }; static ctl_table unaligned_root[] = { - {1, "unaligned_fixup", NULL, 0, 0555, unaligned_table}, - {0} + { + .ctl_name = CTL_UNNUMBERED, + .procname = "unaligned_fixup", + .mode = 0555, + unaligned_table + }, + {} }; static ctl_table sh64_root[] = { - {1, "sh64", NULL, 0, 0555, unaligned_root}, - {0} + { + .ctl_name = CTL_UNNUMBERED, + .procname = "sh64", + .mode = 0555, + .child = unaligned_root + }, + {} }; static struct ctl_table_header *sysctl_header; static int __init init_sysctl(void) { - sysctl_header = register_sysctl_table(sh64_root, 0); + sysctl_header = register_sysctl_table(sh64_root); return 0; } diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c index 925a65240cf..b2e1fd8e357 100644 --- a/arch/um/os-Linux/sigio.c +++ b/arch/um/os-Linux/sigio.c @@ -97,20 +97,22 @@ static int write_sigio_thread(void *unused) static int need_poll(struct pollfds *polls, int n) { - if(n <= polls->size){ - polls->used = n; + struct pollfd *new; + + if(n <= polls->size) return 0; - } - kfree(polls->poll); - polls->poll = um_kmalloc_atomic(n * sizeof(struct pollfd)); - if(polls->poll == NULL){ + + new = um_kmalloc_atomic(n * sizeof(struct pollfd)); + if(new == NULL){ printk("need_poll : failed to allocate new pollfds\n"); - polls->size = 0; - polls->used = 0; return -ENOMEM; } + + memcpy(new, polls->poll, polls->used * sizeof(struct pollfd)); + kfree(polls->poll); + + polls->poll = new; polls->size = n; - polls->used = n; return 0; } @@ -171,15 +173,15 @@ int add_sigio_fd(int fd) goto out; } - n = current_poll.used + 1; - err = need_poll(&next_poll, n); + n = current_poll.used; + err = need_poll(&next_poll, n + 1); if(err) goto out; - for(i = 0; i < current_poll.used; i++) - next_poll.poll[i] = current_poll.poll[i]; - - next_poll.poll[n - 1] = *p; + memcpy(next_poll.poll, current_poll.poll, + current_poll.used * sizeof(struct pollfd)); + next_poll.poll[n] = *p; + next_poll.used = n + 1; update_thread(); out: sigio_unlock(); @@ -214,6 +216,7 @@ int ignore_sigio_fd(int fd) if(p->fd != fd) next_poll.poll[n++] = *p; } + next_poll.used = current_poll.used - 1; update_thread(); out: @@ -331,10 +334,9 @@ void maybe_sigio_broken(int fd, int read) sigio_lock(); err = need_poll(&all_sigio_fds, all_sigio_fds.used + 1); - if(err){ - printk("maybe_sigio_broken - failed to add pollfd\n"); + if(err) goto out; - } + all_sigio_fds.poll[all_sigio_fds.used++] = ((struct pollfd) { .fd = fd, .events = read ? POLLIN : POLLOUT, diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 02dd39457bc..56eb14c9847 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -24,6 +24,14 @@ config X86 bool default y +config GENERIC_TIME + bool + default y + +config GENERIC_TIME_VSYSCALL + bool + default y + config ZONE_DMA32 bool default y @@ -152,18 +160,18 @@ config MPSC Optimize for Intel Pentium 4 and older Nocona/Dempsey Xeon CPUs with Intel Extended Memory 64 Technology(EM64T). For details see <http://www.intel.com/technology/64bitextensions/>. - Note the the latest Xeons (Xeon 51xx and 53xx) are not based on the - Netburst core and shouldn't use this option. You can distingush them + Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the + Netburst core and shouldn't use this option. You can distinguish them using the cpu family field - in /proc/cpuinfo. Family 15 is a older Xeon, Family 6 a newer one - (this rule only applies to system that support EM64T) + in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one + (this rule only applies to systems that support EM64T) config MCORE2 bool "Intel Core2 / newer Xeon" help Optimize for Intel Core2 and newer Xeons (51xx) - You can distingush the newer Xeons from the older ones using - the cpu family field in /proc/cpuinfo. 15 is a older Xeon + You can distinguish the newer Xeons from the older ones using + the cpu family field in /proc/cpuinfo. 15 is an older Xeon (use CONFIG_MPSC then), 6 is a newer one. This rule only applies to CPUs that support EM64T. @@ -458,8 +466,8 @@ config IOMMU on systems with more than 3GB. This is usually needed for USB, sound, many IDE/SATA chipsets and some other devices. Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART - based IOMMU and a software bounce buffer based IOMMU used on Intel - systems and as fallback. + based hardware IOMMU and a software bounce buffer based IOMMU used + on Intel systems and as fallback. The code is only active when needed (enough memory and limited device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified too. @@ -496,6 +504,12 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT # need this always selected by IOMMU for the VIA workaround config SWIOTLB bool + help + Support for software bounce buffers used on x86-64 systems + which don't have a hardware IOMMU (e.g. the current generation + of Intel's x86-64 CPUs). Using this PCI devices which can only + access 32-bits of memory can be used on systems with more than + 3 GB of memory. If unsure, say Y. config X86_MCE bool "Machine check support" if EMBEDDED diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index 69584c29530..293a4a4c609 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc3 -# Fri Jan 5 11:54:41 2007 +# Linux kernel version: 2.6.20-git8 +# Tue Feb 13 11:25:16 2007 # CONFIG_X86_64=y CONFIG_64BIT=y @@ -11,6 +11,7 @@ CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y +CONFIG_ZONE_DMA=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -153,6 +154,7 @@ CONFIG_NEED_MULTIPLE_NODES=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y CONFIG_NR_CPUS=32 @@ -201,13 +203,14 @@ CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_SLEEP_PROC_SLEEP=y +CONFIG_ACPI_PROCFS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y -# CONFIG_ACPI_VIDEO is not set # CONFIG_ACPI_HOTKEY is not set CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y @@ -263,7 +266,6 @@ CONFIG_PCI_MMCONFIG=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y CONFIG_PCI_MSI=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set # CONFIG_HT_IRQ is not set @@ -398,6 +400,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -466,6 +469,7 @@ CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set +CONFIG_BLK_DEV_IDEACPI=y # CONFIG_IDE_TASK_IOCTL is not set # @@ -497,6 +501,7 @@ CONFIG_BLK_DEV_ATIIXP=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -507,6 +512,7 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -599,6 +605,7 @@ CONFIG_MEGARAID_SAS=y # Serial ATA (prod) and Parallel ATA (experimental) drivers # CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_AHCI=y CONFIG_SATA_SVW=y CONFIG_ATA_PIIX=y @@ -614,6 +621,7 @@ CONFIG_SATA_SIL=y # CONFIG_SATA_ULI is not set CONFIG_SATA_VIA=y # CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set CONFIG_SATA_INTEL_COMBINED=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set @@ -630,6 +638,7 @@ CONFIG_SATA_INTEL_COMBINED=y # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set @@ -682,9 +691,7 @@ CONFIG_IEEE1394=y # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_OUI_DB is not set # CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set -# CONFIG_IEEE1394_EXPORT_FULL_API is not set # # Device Drivers @@ -707,6 +714,11 @@ CONFIG_IEEE1394_RAWIO=y # CONFIG_I2O is not set # +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set + +# # Network device support # CONFIG_NETDEVICES=y @@ -774,6 +786,7 @@ CONFIG_8139TOO=y # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -795,11 +808,13 @@ CONFIG_E1000=y CONFIG_TIGON3=y CONFIG_BNX2=y # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set @@ -1115,6 +1130,7 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y +CONFIG_OBSOLETE_OSS=y # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_ES1371 is not set CONFIG_SOUND_ICH=y @@ -1128,6 +1144,7 @@ CONFIG_SOUND_ICH=y # HID Devices # CONFIG_HID=y +# CONFIG_HID_DEBUG is not set # # USB support @@ -1142,10 +1159,8 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set # @@ -1155,9 +1170,11 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -1208,6 +1225,7 @@ CONFIG_USB_HID=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set # # USB Imaging devices @@ -1313,6 +1331,10 @@ CONFIG_USB_MON=y # # +# Auxiliary Display support +# + +# # Virtualization # # CONFIG_KVM is not set @@ -1512,6 +1534,7 @@ CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_LOG_BUF_SHIFT=18 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set @@ -1520,7 +1543,6 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set @@ -1560,4 +1582,5 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c index 6efe04f3cbc..071100ea125 100644 --- a/arch/x86_64/ia32/ia32_binfmt.c +++ b/arch/x86_64/ia32/ia32_binfmt.c @@ -344,20 +344,30 @@ EXPORT_SYMBOL(ia32_setup_arg_pages); #include <linux/sysctl.h> static ctl_table abi_table2[] = { - { 99, "vsyscall32", &sysctl_vsyscall32, sizeof(int), 0644, NULL, - proc_dointvec }, - { 0, } -}; + { + .ctl_name = 99, + .procname = "vsyscall32", + .data = &sysctl_vsyscall32, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec + }, + {} +}; -static ctl_table abi_root_table2[] = { - { .ctl_name = CTL_ABI, .procname = "abi", .mode = 0555, - .child = abi_table2 }, - { 0 }, -}; +static ctl_table abi_root_table2[] = { + { + .ctl_name = CTL_ABI, + .procname = "abi", + .mode = 0555, + .child = abi_table2 + }, + {} +}; static __init int ia32_binfmt_init(void) { - register_sysctl_table(abi_root_table2, 1); + register_sysctl_table(abi_root_table2); return 0; } __initcall(ia32_binfmt_init); diff --git a/arch/x86_64/ia32/ia32_signal.c b/arch/x86_64/ia32/ia32_signal.c index ff499ef2a1b..359eacc3850 100644 --- a/arch/x86_64/ia32/ia32_signal.c +++ b/arch/x86_64/ia32/ia32_signal.c @@ -21,6 +21,7 @@ #include <linux/stddef.h> #include <linux/personality.h> #include <linux/compat.h> +#include <linux/binfmts.h> #include <asm/ucontext.h> #include <asm/uaccess.h> #include <asm/i387.h> @@ -449,7 +450,11 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, /* Return stub is in 32bit vsyscall page */ { - void __user *restorer = VSYSCALL32_SIGRETURN; + void __user *restorer; + if (current->binfmt->hasvdso) + restorer = VSYSCALL32_SIGRETURN; + else + restorer = (void *)&frame->retcode; if (ka->sa.sa_flags & SA_RESTORER) restorer = ka->sa.sa_restorer; err |= __put_user(ptr_to_compat(restorer), &frame->pretcode); @@ -495,7 +500,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, ptrace_notify(SIGTRAP); #if DEBUG_SIG - printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n", + printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%u\n", current->comm, current->pid, frame, regs->rip, frame->pretcode); #endif @@ -601,7 +606,7 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, ptrace_notify(SIGTRAP); #if DEBUG_SIG - printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n", + printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%u\n", current->comm, current->pid, frame, regs->rip, frame->pretcode); #endif diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S index 5f32cf4de5f..eda7a0d4dc1 100644 --- a/arch/x86_64/ia32/ia32entry.S +++ b/arch/x86_64/ia32/ia32entry.S @@ -718,4 +718,5 @@ ia32_sys_call_table: .quad compat_sys_vmsplice .quad compat_sys_move_pages .quad sys_getcpu + .quad sys_epoll_pwait ia32_syscall_end: diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index 3c7cbff04d3..bb47e86f3d0 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -8,7 +8,7 @@ obj-y := process.o signal.o entry.o traps.o irq.o \ ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_x86_64.o \ x8664_ksyms.o i387.o syscall.o vsyscall.o \ setup64.o bootflag.o e820.o reboot.o quirks.o i8237.o \ - pci-dma.o pci-nommu.o alternative.o + pci-dma.o pci-nommu.o alternative.o hpet.o tsc.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_X86_MCE) += mce.o therm_throt.o @@ -19,7 +19,7 @@ obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_X86_CPUID) += cpuid.o -obj-$(CONFIG_SMP) += smp.o smpboot.o trampoline.o +obj-$(CONFIG_SMP) += smp.o smpboot.o trampoline.o tsc_sync.o obj-y += apic.o nmi.o obj-y += io_apic.o mpparse.o \ genapic.o genapic_cluster.o genapic_flat.o @@ -43,6 +43,7 @@ obj-$(CONFIG_PCI) += early-quirks.o obj-y += topology.o obj-y += intel_cacheinfo.o +obj-y += pcspeaker.o CFLAGS_vsyscall.o := $(PROFILING) -g0 @@ -56,3 +57,4 @@ quirks-y += ../../i386/kernel/quirks.o i8237-y += ../../i386/kernel/i8237.o msr-$(subst m,y,$(CONFIG_X86_MSR)) += ../../i386/kernel/msr.o alternative-y += ../../i386/kernel/alternative.o +pcspeaker-y += ../../i386/kernel/pcspeaker.o diff --git a/arch/x86_64/kernel/acpi/sleep.c b/arch/x86_64/kernel/acpi/sleep.c index 5ebf62c7a3d..23178ce6c78 100644 --- a/arch/x86_64/kernel/acpi/sleep.c +++ b/arch/x86_64/kernel/acpi/sleep.c @@ -58,7 +58,7 @@ unsigned long acpi_wakeup_address = 0; unsigned long acpi_video_flags; extern char wakeup_start, wakeup_end; -extern unsigned long FASTCALL(acpi_copy_wakeup_routine(unsigned long)); +extern unsigned long acpi_copy_wakeup_routine(unsigned long); static pgd_t low_ptr; diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index 124b2d27b4a..723417d924c 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -37,6 +37,7 @@ #include <asm/idle.h> #include <asm/proto.h> #include <asm/timex.h> +#include <asm/hpet.h> #include <asm/apic.h> int apic_mapped; @@ -763,7 +764,7 @@ static void setup_APIC_timer(unsigned int clocks) local_irq_save(flags); /* wait for irq slice */ - if (vxtime.hpet_address && hpet_use_timer) { + if (hpet_address && hpet_use_timer) { int trigger = hpet_readl(HPET_T0_CMP); while (hpet_readl(HPET_COUNTER) >= trigger) /* do nothing */ ; @@ -785,7 +786,7 @@ static void setup_APIC_timer(unsigned int clocks) /* Turn off PIT interrupt if we use APIC timer as main timer. Only works with the PM timer right now TBD fix it for HPET too. */ - if (vxtime.mode == VXTIME_PMTMR && + if ((pmtmr_ioport != 0) && smp_processor_id() == boot_cpu_id && apic_runs_main_timer == 1 && !cpu_isset(boot_cpu_id, timer_interrupt_broadcast_ipi_mask)) { diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index 6fe191c5808..4651fd22b21 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -83,6 +83,13 @@ static inline int bad_addr(unsigned long *addrp, unsigned long size) return 1; } +#ifdef CONFIG_NUMA + /* NUMA memory to node map */ + if (last >= nodemap_addr && addr < nodemap_addr + nodemap_size) { + *addrp = nodemap_addr + nodemap_size; + return 1; + } +#endif /* XXX ramdisk image here? */ return 0; } @@ -184,6 +191,37 @@ unsigned long __init e820_end_of_ram(void) } /* + * Find the hole size in the range. + */ +unsigned long __init e820_hole_size(unsigned long start, unsigned long end) +{ + unsigned long ram = 0; + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + unsigned long last, addr; + + if (ei->type != E820_RAM || + ei->addr+ei->size <= start || + ei->addr >= end) + continue; + + addr = round_up(ei->addr, PAGE_SIZE); + if (addr < start) + addr = start; + + last = round_down(ei->addr + ei->size, PAGE_SIZE); + if (last >= end) + last = end; + + if (last > addr) + ram += last - addr; + } + return ((end - start) - ram); +} + +/* * Mark e820 reserved areas as busy for the resource manager. */ void __init e820_reserve_resources(void) diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S index 1e6f8087067..598a4d0351f 100644 --- a/arch/x86_64/kernel/head.S +++ b/arch/x86_64/kernel/head.S @@ -163,6 +163,20 @@ startup_64: */ lgdt cpu_gdt_descr + /* set up data segments. actually 0 would do too */ + movl $__KERNEL_DS,%eax + movl %eax,%ds + movl %eax,%ss + movl %eax,%es + + /* + * We don't really need to load %fs or %gs, but load them anyway + * to kill any stale realmode selectors. This allows execution + * under VT hardware. + */ + movl %eax,%fs + movl %eax,%gs + /* * Setup up a dummy PDA. this is just for some early bootup code * that does in_interrupt() @@ -173,12 +187,6 @@ startup_64: shrq $32,%rdx wrmsr - /* set up data segments. actually 0 would do too */ - movl $__KERNEL_DS,%eax - movl %eax,%ds - movl %eax,%ss - movl %eax,%es - /* esi is pointer to real mode structure with interesting info. pass it to C */ movl %esi, %edi diff --git a/arch/i386/kernel/time_hpet.c b/arch/x86_64/kernel/hpet.c index 1e4702dfcd0..65a0edd71a1 100644 --- a/arch/i386/kernel/time_hpet.c +++ b/arch/x86_64/kernel/hpet.c @@ -1,224 +1,138 @@ -/* - * linux/arch/i386/kernel/time_hpet.c - * This code largely copied from arch/x86_64/kernel/time.c - * See that file for credits. - * - * 2003-06-30 Venkatesh Pallipadi - Additional changes for HPET support - */ - -#include <linux/errno.h> #include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> +#include <linux/sched.h> #include <linux/init.h> -#include <linux/smp.h> +#include <linux/mc146818rtc.h> +#include <linux/time.h> +#include <linux/clocksource.h> +#include <linux/ioport.h> +#include <linux/acpi.h> +#include <linux/hpet.h> +#include <asm/pgtable.h> +#include <asm/vsyscall.h> +#include <asm/timex.h> +#include <asm/hpet.h> -#include <asm/timer.h> -#include <asm/fixmap.h> -#include <asm/apic.h> +int nohpet __initdata; -#include <linux/timex.h> +unsigned long hpet_address; +unsigned long hpet_period; /* fsecs / HPET clock */ +unsigned long hpet_tick; /* HPET clocks / interrupt */ -#include <asm/hpet.h> -#include <linux/hpet.h> +int hpet_use_timer; /* Use counter of hpet for time keeping, + * otherwise PIT + */ -static unsigned long hpet_period; /* fsecs / HPET clock */ -unsigned long hpet_tick; /* hpet clks count per tick */ -unsigned long hpet_address; /* hpet memory map physical address */ -int hpet_use_timer; +#ifdef CONFIG_HPET +static __init int late_hpet_init(void) +{ + struct hpet_data hd; + unsigned int ntimer; -static int use_hpet; /* can be used for runtime check of hpet */ -static int boot_hpet_disable; /* boottime override for HPET timer */ -static void __iomem * hpet_virt_address; /* hpet kernel virtual address */ + if (!hpet_address) + return 0; -#define FSEC_TO_USEC (1000000000UL) + memset(&hd, 0, sizeof(hd)); -int hpet_readl(unsigned long a) -{ - return readl(hpet_virt_address + a); -} + ntimer = hpet_readl(HPET_ID); + ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT; + ntimer++; -static void hpet_writel(unsigned long d, unsigned long a) -{ - writel(d, hpet_virt_address + a); -} + /* + * Register with driver. + * Timer0 and Timer1 is used by platform. + */ + hd.hd_phys_address = hpet_address; + hd.hd_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE); + hd.hd_nirqs = ntimer; + hd.hd_flags = HPET_DATA_PLATFORM; + hpet_reserve_timer(&hd, 0); +#ifdef CONFIG_HPET_EMULATE_RTC + hpet_reserve_timer(&hd, 1); +#endif + hd.hd_irq[0] = HPET_LEGACY_8254; + hd.hd_irq[1] = HPET_LEGACY_RTC; + if (ntimer > 2) { + struct hpet *hpet; + struct hpet_timer *timer; + int i; + + hpet = (struct hpet *) fix_to_virt(FIX_HPET_BASE); + timer = &hpet->hpet_timers[2]; + for (i = 2; i < ntimer; timer++, i++) + hd.hd_irq[i] = (timer->hpet_config & + Tn_INT_ROUTE_CNF_MASK) >> + Tn_INT_ROUTE_CNF_SHIFT; -#ifdef CONFIG_X86_LOCAL_APIC -/* - * HPET counters dont wrap around on every tick. They just change the - * comparator value and continue. Next tick can be caught by checking - * for a change in the comparator value. Used in apic.c. - */ -static void __devinit wait_hpet_tick(void) -{ - unsigned int start_cmp_val, end_cmp_val; + } - start_cmp_val = hpet_readl(HPET_T0_CMP); - do { - end_cmp_val = hpet_readl(HPET_T0_CMP); - } while (start_cmp_val == end_cmp_val); + hpet_alloc(&hd); + return 0; } +fs_initcall(late_hpet_init); #endif -static int hpet_timer_stop_set_go(unsigned long tick) +int hpet_timer_stop_set_go(unsigned long tick) { unsigned int cfg; - /* - * Stop the timers and reset the main counter. - */ +/* + * Stop the timers and reset the main counter. + */ + cfg = hpet_readl(HPET_CFG); - cfg &= ~HPET_CFG_ENABLE; + cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY); hpet_writel(cfg, HPET_CFG); hpet_writel(0, HPET_COUNTER); hpet_writel(0, HPET_COUNTER + 4); +/* + * Set up timer 0, as periodic with first interrupt to happen at hpet_tick, + * and period also hpet_tick. + */ if (hpet_use_timer) { - /* - * Set up timer 0, as periodic with first interrupt to happen at - * hpet_tick, and period also hpet_tick. - */ - cfg = hpet_readl(HPET_T0_CFG); - cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | - HPET_TN_SETVAL | HPET_TN_32BIT; - hpet_writel(cfg, HPET_T0_CFG); - - /* - * The first write after writing TN_SETVAL to the config register sets - * the counter value, the second write sets the threshold. - */ - hpet_writel(tick, HPET_T0_CMP); - hpet_writel(tick, HPET_T0_CMP); - } - /* - * Go! - */ - cfg = hpet_readl(HPET_CFG); - if (hpet_use_timer) + hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | + HPET_TN_32BIT, HPET_T0_CFG); + hpet_writel(hpet_tick, HPET_T0_CMP); /* next interrupt */ + hpet_writel(hpet_tick, HPET_T0_CMP); /* period */ cfg |= HPET_CFG_LEGACY; + } +/* + * Go! + */ + cfg |= HPET_CFG_ENABLE; hpet_writel(cfg, HPET_CFG); return 0; } -/* - * Check whether HPET was found by ACPI boot parse. If yes setup HPET - * counter 0 for kernel base timer. - */ -int __init hpet_enable(void) +int hpet_arch_init(void) { unsigned int id; - unsigned long tick_fsec_low, tick_fsec_high; /* tick in femto sec */ - unsigned long hpet_tick_rem; - if (boot_hpet_disable) + if (!hpet_address) return -1; + set_fixmap_nocache(FIX_HPET_BASE, hpet_address); + __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); + +/* + * Read the period, compute tick and quotient. + */ - if (!hpet_address) { - return -1; - } - hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); - /* - * Read the period, compute tick and quotient. - */ id = hpet_readl(HPET_ID); - /* - * We are checking for value '1' or more in number field if - * CONFIG_HPET_EMULATE_RTC is set because we will need an - * additional timer for RTC emulation. - * However, we can do with one timer otherwise using the - * the single HPET timer for system time. - */ -#ifdef CONFIG_HPET_EMULATE_RTC - if (!(id & HPET_ID_NUMBER)) { - iounmap(hpet_virt_address); - hpet_virt_address = NULL; + if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER)) return -1; - } -#endif - hpet_period = hpet_readl(HPET_PERIOD); - if ((hpet_period < HPET_MIN_PERIOD) || (hpet_period > HPET_MAX_PERIOD)) { - iounmap(hpet_virt_address); - hpet_virt_address = NULL; + if (hpet_period < 100000 || hpet_period > 100000000) return -1; - } - /* - * 64 bit math - * First changing tick into fsec - * Then 64 bit div to find number of hpet clk per tick - */ - ASM_MUL64_REG(tick_fsec_low, tick_fsec_high, - KERNEL_TICK_USEC, FSEC_TO_USEC); - ASM_DIV64_REG(hpet_tick, hpet_tick_rem, - hpet_period, tick_fsec_low, tick_fsec_high); - - if (hpet_tick_rem > (hpet_period >> 1)) - hpet_tick++; /* rounding the result */ - - hpet_use_timer = id & HPET_ID_LEGSUP; - - if (hpet_timer_stop_set_go(hpet_tick)) { - iounmap(hpet_virt_address); - hpet_virt_address = NULL; - return -1; - } + hpet_tick = (FSEC_PER_TICK + hpet_period / 2) / hpet_period; - use_hpet = 1; + hpet_use_timer = (id & HPET_ID_LEGSUP); -#ifdef CONFIG_HPET - { - struct hpet_data hd; - unsigned int ntimer; - - memset(&hd, 0, sizeof (hd)); - - ntimer = hpet_readl(HPET_ID); - ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT; - ntimer++; - - /* - * Register with driver. - * Timer0 and Timer1 is used by platform. - */ - hd.hd_phys_address = hpet_address; - hd.hd_address = hpet_virt_address; - hd.hd_nirqs = ntimer; - hd.hd_flags = HPET_DATA_PLATFORM; - hpet_reserve_timer(&hd, 0); -#ifdef CONFIG_HPET_EMULATE_RTC - hpet_reserve_timer(&hd, 1); -#endif - hd.hd_irq[0] = HPET_LEGACY_8254; - hd.hd_irq[1] = HPET_LEGACY_RTC; - if (ntimer > 2) { - struct hpet __iomem *hpet; - struct hpet_timer __iomem *timer; - int i; - - hpet = hpet_virt_address; - - for (i = 2, timer = &hpet->hpet_timers[2]; i < ntimer; - timer++, i++) - hd.hd_irq[i] = (timer->hpet_config & - Tn_INT_ROUTE_CNF_MASK) >> - Tn_INT_ROUTE_CNF_SHIFT; - - } - - hpet_alloc(&hd); - } -#endif - -#ifdef CONFIG_X86_LOCAL_APIC - if (hpet_use_timer) - wait_timer_tick = wait_hpet_tick; -#endif - return 0; + return hpet_timer_stop_set_go(hpet_tick); } int hpet_reenable(void) @@ -226,28 +140,51 @@ int hpet_reenable(void) return hpet_timer_stop_set_go(hpet_tick); } -int is_hpet_enabled(void) -{ - return use_hpet; -} +/* + * calibrate_tsc() calibrates the processor TSC in a very simple way, comparing + * it to the HPET timer of known frequency. + */ -int is_hpet_capable(void) +#define TICK_COUNT 100000000 +#define TICK_MIN 5000 + +/* + * Some platforms take periodic SMI interrupts with 5ms duration. Make sure none + * occurs between the reads of the hpet & TSC. + */ +static void __init read_hpet_tsc(int *hpet, int *tsc) { - if (!boot_hpet_disable && hpet_address) - return 1; - return 0; + int tsc1, tsc2, hpet1; + + do { + tsc1 = get_cycles_sync(); + hpet1 = hpet_readl(HPET_COUNTER); + tsc2 = get_cycles_sync(); + } while (tsc2 - tsc1 > TICK_MIN); + *hpet = hpet1; + *tsc = tsc2; } -static int __init hpet_setup(char* str) +unsigned int __init hpet_calibrate_tsc(void) { - if (str) { - if (!strncmp("disable", str, 7)) - boot_hpet_disable = 1; - } - return 1; -} + int tsc_start, hpet_start; + int tsc_now, hpet_now; + unsigned long flags; + + local_irq_save(flags); + + read_hpet_tsc(&hpet_start, &tsc_start); -__setup("hpet=", hpet_setup); + do { + local_irq_disable(); + read_hpet_tsc(&hpet_now, &tsc_now); + local_irq_restore(flags); + } while ((tsc_now - tsc_start) < TICK_COUNT && + (hpet_now - hpet_start) < TICK_COUNT); + + return (tsc_now - tsc_start) * 1000000000L + / ((hpet_now - hpet_start) * hpet_period / 1000); +} #ifdef CONFIG_HPET_EMULATE_RTC /* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET @@ -264,7 +201,6 @@ __setup("hpet=", hpet_setup); * For (3), we use interrupts at 64Hz or user specified periodic * frequency, whichever is higher. */ -#include <linux/mc146818rtc.h> #include <linux/rtc.h> #define DEFAULT_RTC_INT_FREQ 64 @@ -283,6 +219,11 @@ static unsigned long PIE_count; static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */ static unsigned int hpet_t1_cmp; /* cached comparator register */ +int is_hpet_enabled(void) +{ + return hpet_address != 0; +} + /* * Timer 1 for RTC, we do not use periodic interrupt feature, * even if HPET supports periodic interrupts on Timer 1. @@ -367,8 +308,9 @@ static void hpet_rtc_timer_reinit(void) if (PIE_on) PIE_count += lost_ints; - printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", - hpet_rtc_int_freq); + if (printk_ratelimit()) + printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", + hpet_rtc_int_freq); } } @@ -450,7 +392,7 @@ int hpet_rtc_dropped_irq(void) return 1; } -irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) +irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs) { struct rtc_time curr_time; unsigned long rtc_int_flag = 0; @@ -495,3 +437,75 @@ irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) } #endif +static int __init nohpet_setup(char *s) +{ + nohpet = 1; + return 1; +} + +__setup("nohpet", nohpet_setup); + +#define HPET_MASK 0xFFFFFFFF +#define HPET_SHIFT 22 + +/* FSEC = 10^-15 NSEC = 10^-9 */ +#define FSEC_PER_NSEC 1000000 + +static void *hpet_ptr; + +static cycle_t read_hpet(void) +{ + return (cycle_t)readl(hpet_ptr); +} + +static cycle_t __vsyscall_fn vread_hpet(void) +{ + return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0); +} + +struct clocksource clocksource_hpet = { + .name = "hpet", + .rating = 250, + .read = read_hpet, + .mask = (cycle_t)HPET_MASK, + .mult = 0, /* set below */ + .shift = HPET_SHIFT, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .vread = vread_hpet, +}; + +static int __init init_hpet_clocksource(void) +{ + unsigned long hpet_period; + void __iomem *hpet_base; + u64 tmp; + + if (!hpet_address) + return -ENODEV; + + /* calculate the hpet address: */ + hpet_base = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); + hpet_ptr = hpet_base + HPET_COUNTER; + + /* calculate the frequency: */ + hpet_period = readl(hpet_base + HPET_PERIOD); + + /* + * hpet period is in femto seconds per cycle + * so we need to convert this to ns/cyc units + * aproximated by mult/2^shift + * + * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift + * fsec/cyc * 1ns/1000000fsec * 2^shift = mult + * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult + * (fsec/cyc << shift)/1000000 = mult + * (hpet_period << shift)/FSEC_PER_NSEC = mult + */ + tmp = (u64)hpet_period << HPET_SHIFT; + do_div(tmp, FSEC_PER_NSEC); + clocksource_hpet.mult = (u32)tmp; + + return clocksource_register(&clocksource_hpet); +} + +module_init(init_hpet_clocksource); diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86_64/kernel/i8259.c index d73c79e821f..01e2cf0bdeb 100644 --- a/arch/x86_64/kernel/i8259.c +++ b/arch/x86_64/kernel/i8259.c @@ -103,6 +103,7 @@ static void mask_and_ack_8259A(unsigned int); static struct irq_chip i8259A_chip = { .name = "XT-PIC", .mask = disable_8259A_irq, + .disable = disable_8259A_irq, .unmask = enable_8259A_irq, .mask_ack = mask_and_ack_8259A, }; diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 6be6730acb5..950682f3576 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -810,11 +810,9 @@ static void ioapic_register_intr(int irq, int vector, unsigned long trigger) trigger == IOAPIC_LEVEL) set_irq_chip_and_handler_name(irq, &ioapic_chip, handle_fasteoi_irq, "fasteoi"); - else { - irq_desc[irq].status |= IRQ_DELAYED_DISABLE; + else set_irq_chip_and_handler_name(irq, &ioapic_chip, handle_edge_irq, "edge"); - } } static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq) { @@ -831,7 +829,7 @@ static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq) entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; entry.mask = 0; /* enable IRQ */ - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.dest = cpu_mask_to_apicid(TARGET_CPUS); entry.trigger = irq_trigger(idx); entry.polarity = irq_polarity(idx); @@ -839,7 +837,7 @@ static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq) if (irq_trigger(idx)) { entry.trigger = 1; entry.mask = 1; - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.dest = cpu_mask_to_apicid(TARGET_CPUS); } if (!apic && !IO_APIC_IRQ(irq)) @@ -851,7 +849,7 @@ static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq) if (vector < 0) return; - entry.dest.logical.logical_dest = cpu_mask_to_apicid(mask); + entry.dest = cpu_mask_to_apicid(mask); entry.vector = vector; ioapic_register_intr(irq, vector, IOAPIC_AUTO); @@ -920,7 +918,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in */ entry.dest_mode = INT_DEST_MODE; entry.mask = 0; /* unmask IRQ now */ - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); + entry.dest = cpu_mask_to_apicid(TARGET_CPUS); entry.delivery_mode = INT_DELIVERY_MODE; entry.polarity = 0; entry.trigger = 0; @@ -1020,18 +1018,17 @@ void __apicdebuginit print_IO_APIC(void) printk(KERN_DEBUG ".... IRQ redirection table:\n"); - printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol" - " Stat Dest Deli Vect: \n"); + printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol" + " Stat Dmod Deli Vect: \n"); for (i = 0; i <= reg_01.bits.entries; i++) { struct IO_APIC_route_entry entry; entry = ioapic_read_entry(apic, i); - printk(KERN_DEBUG " %02x %03X %02X ", + printk(KERN_DEBUG " %02x %03X ", i, - entry.dest.logical.logical_dest, - entry.dest.physical.physical_dest + entry.dest ); printk("%1d %1d %1d %1d %1d %1d %1d %02X\n", @@ -1293,8 +1290,7 @@ void disable_IO_APIC(void) entry.dest_mode = 0; /* Physical */ entry.delivery_mode = dest_ExtINT; /* ExtInt */ entry.vector = 0; - entry.dest.physical.physical_dest = - GET_APIC_ID(apic_read(APIC_ID)); + entry.dest = GET_APIC_ID(apic_read(APIC_ID)); /* * Add it to the IO-APIC irq-routing table: @@ -1556,7 +1552,7 @@ static inline void unlock_ExtINT_logic(void) entry1.dest_mode = 0; /* physical delivery */ entry1.mask = 0; /* unmask IRQ now */ - entry1.dest.physical.physical_dest = hard_smp_processor_id(); + entry1.dest = hard_smp_processor_id(); entry1.delivery_mode = dest_ExtINT; entry1.polarity = entry0.polarity; entry1.trigger = 0; @@ -2131,7 +2127,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int p entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; - entry.dest.logical.logical_dest = cpu_mask_to_apicid(mask); + entry.dest = cpu_mask_to_apicid(mask); entry.trigger = triggering; entry.polarity = polarity; entry.mask = 1; /* Disabled (masked) */ diff --git a/arch/x86_64/kernel/ioport.c b/arch/x86_64/kernel/ioport.c index fe063d3cfe4..745b1f0f494 100644 --- a/arch/x86_64/kernel/ioport.c +++ b/arch/x86_64/kernel/ioport.c @@ -114,6 +114,6 @@ asmlinkage long sys_iopl(unsigned int level, struct pt_regs *regs) if (!capable(CAP_SYS_RAWIO)) return -EPERM; } - regs->eflags = (regs->eflags &~ 0x3000UL) | (level << 12); + regs->eflags = (regs->eflags &~ X86_EFLAGS_IOPL) | (level << 12); return 0; } diff --git a/arch/x86_64/kernel/irq.c b/arch/x86_64/kernel/irq.c index 0c06af6c13b..3bc30d2c13d 100644 --- a/arch/x86_64/kernel/irq.c +++ b/arch/x86_64/kernel/irq.c @@ -18,6 +18,7 @@ #include <asm/uaccess.h> #include <asm/io_apic.h> #include <asm/idle.h> +#include <asm/smp.h> atomic_t irq_err_count; @@ -120,9 +121,14 @@ asmlinkage unsigned int do_IRQ(struct pt_regs *regs) if (likely(irq < NR_IRQS)) generic_handle_irq(irq); - else if (printk_ratelimit()) - printk(KERN_EMERG "%s: %d.%d No irq handler for vector\n", - __func__, smp_processor_id(), vector); + else { + if (!disable_apic) + ack_APIC_irq(); + + if (printk_ratelimit()) + printk(KERN_EMERG "%s: %d.%d No irq handler for vector\n", + __func__, smp_processor_id(), vector); + } irq_exit(); diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c index bdb54a2c9f1..8011a8e1c7d 100644 --- a/arch/x86_64/kernel/mce.c +++ b/arch/x86_64/kernel/mce.c @@ -19,6 +19,7 @@ #include <linux/cpu.h> #include <linux/percpu.h> #include <linux/ctype.h> +#include <linux/kmod.h> #include <asm/processor.h> #include <asm/msr.h> #include <asm/mce.h> @@ -42,6 +43,10 @@ static unsigned long console_logged; static int notify_user; static int rip_msr; static int mce_bootlog = 1; +static atomic_t mce_events; + +static char trigger[128]; +static char *trigger_argv[2] = { trigger, NULL }; /* * Lockless MCE logging infrastructure. @@ -57,6 +62,7 @@ struct mce_log mcelog = { void mce_log(struct mce *mce) { unsigned next, entry; + atomic_inc(&mce_events); mce->finished = 0; wmb(); for (;;) { @@ -161,6 +167,17 @@ static inline void mce_get_rip(struct mce *m, struct pt_regs *regs) } } +static void do_mce_trigger(void) +{ + static atomic_t mce_logged; + int events = atomic_read(&mce_events); + if (events != atomic_read(&mce_logged) && trigger[0]) { + /* Small race window, but should be harmless. */ + atomic_set(&mce_logged, events); + call_usermodehelper(trigger, trigger_argv, NULL, -1); + } +} + /* * The actual machine check handler */ @@ -234,8 +251,12 @@ void do_machine_check(struct pt_regs * regs, long error_code) } /* Never do anything final in the polling timer */ - if (!regs) + if (!regs) { + /* Normal interrupt context here. Call trigger for any new + events. */ + do_mce_trigger(); goto out; + } /* If we didn't find an uncorrectable error, pick the last one (shouldn't happen, just being safe). */ @@ -606,17 +627,42 @@ DEFINE_PER_CPU(struct sys_device, device_mce); } \ static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name); +/* TBD should generate these dynamically based on number of available banks */ ACCESSOR(bank0ctl,bank[0],mce_restart()) ACCESSOR(bank1ctl,bank[1],mce_restart()) ACCESSOR(bank2ctl,bank[2],mce_restart()) ACCESSOR(bank3ctl,bank[3],mce_restart()) ACCESSOR(bank4ctl,bank[4],mce_restart()) ACCESSOR(bank5ctl,bank[5],mce_restart()) -static struct sysdev_attribute * bank_attributes[NR_BANKS] = { - &attr_bank0ctl, &attr_bank1ctl, &attr_bank2ctl, - &attr_bank3ctl, &attr_bank4ctl, &attr_bank5ctl}; + +static ssize_t show_trigger(struct sys_device *s, char *buf) +{ + strcpy(buf, trigger); + strcat(buf, "\n"); + return strlen(trigger) + 1; +} + +static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz) +{ + char *p; + int len; + strncpy(trigger, buf, sizeof(trigger)); + trigger[sizeof(trigger)-1] = 0; + len = strlen(trigger); + p = strchr(trigger, '\n'); + if (*p) *p = 0; + return len; +} + +static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger); ACCESSOR(tolerant,tolerant,) ACCESSOR(check_interval,check_interval,mce_restart()) +static struct sysdev_attribute *mce_attributes[] = { + &attr_bank0ctl, &attr_bank1ctl, &attr_bank2ctl, + &attr_bank3ctl, &attr_bank4ctl, &attr_bank5ctl, + &attr_tolerant, &attr_check_interval, &attr_trigger, + NULL +}; /* Per cpu sysdev init. All of the cpus still share the same ctl bank */ static __cpuinit int mce_create_device(unsigned int cpu) @@ -632,11 +678,9 @@ static __cpuinit int mce_create_device(unsigned int cpu) err = sysdev_register(&per_cpu(device_mce,cpu)); if (!err) { - for (i = 0; i < banks; i++) + for (i = 0; mce_attributes[i]; i++) sysdev_create_file(&per_cpu(device_mce,cpu), - bank_attributes[i]); - sysdev_create_file(&per_cpu(device_mce,cpu), &attr_tolerant); - sysdev_create_file(&per_cpu(device_mce,cpu), &attr_check_interval); + mce_attributes[i]); } return err; } @@ -645,11 +689,9 @@ static void mce_remove_device(unsigned int cpu) { int i; - for (i = 0; i < banks; i++) + for (i = 0; mce_attributes[i]; i++) sysdev_remove_file(&per_cpu(device_mce,cpu), - bank_attributes[i]); - sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_tolerant); - sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_check_interval); + mce_attributes[i]); sysdev_unregister(&per_cpu(device_mce,cpu)); memset(&per_cpu(device_mce, cpu).kobj, 0, sizeof(struct kobject)); } diff --git a/arch/x86_64/kernel/mce_amd.c b/arch/x86_64/kernel/mce_amd.c index 93c70725763..d0bd5d66e10 100644 --- a/arch/x86_64/kernel/mce_amd.c +++ b/arch/x86_64/kernel/mce_amd.c @@ -37,6 +37,8 @@ #define THRESHOLD_MAX 0xFFF #define INT_TYPE_APIC 0x00020000 #define MASK_VALID_HI 0x80000000 +#define MASK_CNTP_HI 0x40000000 +#define MASK_LOCKED_HI 0x20000000 #define MASK_LVTOFF_HI 0x00F00000 #define MASK_COUNT_EN_HI 0x00080000 #define MASK_INT_TYPE_HI 0x00060000 @@ -122,14 +124,17 @@ void __cpuinit mce_amd_feature_init(struct cpuinfo_x86 *c) for (block = 0; block < NR_BLOCKS; ++block) { if (block == 0) address = MSR_IA32_MC0_MISC + bank * 4; - else if (block == 1) - address = MCG_XBLK_ADDR - + ((low & MASK_BLKPTR_LO) >> 21); + else if (block == 1) { + address = (low & MASK_BLKPTR_LO) >> 21; + if (!address) + break; + address += MCG_XBLK_ADDR; + } else ++address; if (rdmsr_safe(address, &low, &high)) - continue; + break; if (!(high & MASK_VALID_HI)) { if (block) @@ -138,8 +143,8 @@ void __cpuinit mce_amd_feature_init(struct cpuinfo_x86 *c) break; } - if (!(high & MASK_VALID_HI >> 1) || - (high & MASK_VALID_HI >> 2)) + if (!(high & MASK_CNTP_HI) || + (high & MASK_LOCKED_HI)) continue; if (!block) @@ -187,17 +192,22 @@ asmlinkage void mce_threshold_interrupt(void) /* assume first bank caused it */ for (bank = 0; bank < NR_BANKS; ++bank) { + if (!(per_cpu(bank_map, m.cpu) & (1 << bank))) + continue; for (block = 0; block < NR_BLOCKS; ++block) { if (block == 0) address = MSR_IA32_MC0_MISC + bank * 4; - else if (block == 1) - address = MCG_XBLK_ADDR - + ((low & MASK_BLKPTR_LO) >> 21); + else if (block == 1) { + address = (low & MASK_BLKPTR_LO) >> 21; + if (!address) + break; + address += MCG_XBLK_ADDR; + } else ++address; if (rdmsr_safe(address, &low, &high)) - continue; + break; if (!(high & MASK_VALID_HI)) { if (block) @@ -206,10 +216,14 @@ asmlinkage void mce_threshold_interrupt(void) break; } - if (!(high & MASK_VALID_HI >> 1) || - (high & MASK_VALID_HI >> 2)) + if (!(high & MASK_CNTP_HI) || + (high & MASK_LOCKED_HI)) continue; + /* Log the machine check that caused the threshold + event. */ + do_machine_check(NULL, 0); + if (high & MASK_OVERFLOW_HI) { rdmsrl(address, m.misc); rdmsrl(MSR_IA32_MC0_STATUS + bank * 4, @@ -385,7 +399,7 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu, return 0; if (rdmsr_safe(address, &low, &high)) - goto recurse; + return 0; if (!(high & MASK_VALID_HI)) { if (block) @@ -394,8 +408,8 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu, return 0; } - if (!(high & MASK_VALID_HI >> 1) || - (high & MASK_VALID_HI >> 2)) + if (!(high & MASK_CNTP_HI) || + (high & MASK_LOCKED_HI)) goto recurse; b = kzalloc(sizeof(struct threshold_block), GFP_KERNEL); diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c index 9cb42ecb7f8..486f4c61a94 100644 --- a/arch/x86_64/kernel/nmi.c +++ b/arch/x86_64/kernel/nmi.c @@ -172,7 +172,7 @@ static __cpuinit inline int nmi_known_cpu(void) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: - return boot_cpu_data.x86 == 15; + return boot_cpu_data.x86 == 15 || boot_cpu_data.x86 == 16; case X86_VENDOR_INTEL: if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) return 1; @@ -214,6 +214,23 @@ static __init void nmi_cpu_busy(void *data) } #endif +static unsigned int adjust_for_32bit_ctr(unsigned int hz) +{ + unsigned int retval = hz; + + /* + * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter + * are writable, with higher bits sign extending from bit 31. + * So, we can only program the counter with 31 bit values and + * 32nd bit should be 1, for 33.. to be 1. + * Find the appropriate nmi_hz + */ + if ((((u64)cpu_khz * 1000) / retval) > 0x7fffffffULL) { + retval = ((u64)cpu_khz * 1000) / 0x7fffffffUL + 1; + } + return retval; +} + int __init check_nmi_watchdog (void) { int *counts; @@ -268,17 +285,8 @@ int __init check_nmi_watchdog (void) struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); nmi_hz = 1; - /* - * On Intel CPUs with ARCH_PERFMON only 32 bits in the counter - * are writable, with higher bits sign extending from bit 31. - * So, we can only program the counter with 31 bit values and - * 32nd bit should be 1, for 33.. to be 1. - * Find the appropriate nmi_hz - */ - if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0 && - ((u64)cpu_khz * 1000) > 0x7fffffffULL) { - nmi_hz = ((u64)cpu_khz * 1000) / 0x7fffffffUL + 1; - } + if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) + nmi_hz = adjust_for_32bit_ctr(nmi_hz); } kfree(counts); @@ -360,6 +368,33 @@ void enable_timer_nmi_watchdog(void) } } +static void __acpi_nmi_disable(void *__unused) +{ + apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); +} + +/* + * Disable timer based NMIs on all CPUs: + */ +void acpi_nmi_disable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); +} + +static void __acpi_nmi_enable(void *__unused) +{ + apic_write(APIC_LVT0, APIC_DM_NMI); +} + +/* + * Enable timer based NMIs on all CPUs: + */ +void acpi_nmi_enable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); +} #ifdef CONFIG_PM static int nmi_pm_active; /* nmi_active before suspend */ @@ -634,7 +669,9 @@ static int setup_intel_arch_watchdog(void) /* setup the timer */ wrmsr(evntsel_msr, evntsel, 0); - wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); + + nmi_hz = adjust_for_32bit_ctr(nmi_hz); + wrmsr(perfctr_msr, (u32)(-((u64)cpu_khz * 1000 / nmi_hz)), 0); apic_write(APIC_LVTPC, APIC_DM_NMI); evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; @@ -855,15 +892,23 @@ int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason) dummy &= ~P4_CCCR_OVF; wrmsrl(wd->cccr_msr, dummy); apic_write(APIC_LVTPC, APIC_DM_NMI); + /* start the cycle over again */ + wrmsrl(wd->perfctr_msr, + -((u64)cpu_khz * 1000 / nmi_hz)); } else if (wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) { /* * ArchPerfom/Core Duo needs to re-unmask * the apic vector */ apic_write(APIC_LVTPC, APIC_DM_NMI); + /* ARCH_PERFMON has 32 bit counter writes */ + wrmsr(wd->perfctr_msr, + (u32)(-((u64)cpu_khz * 1000 / nmi_hz)), 0); + } else { + /* start the cycle over again */ + wrmsrl(wd->perfctr_msr, + -((u64)cpu_khz * 1000 / nmi_hz)); } - /* start the cycle over again */ - wrmsrl(wd->perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz)); rc = 1; } else if (nmi_watchdog == NMI_IO_APIC) { /* don't know how to accurately check for this. diff --git a/arch/x86_64/kernel/pci-calgary.c b/arch/x86_64/kernel/pci-calgary.c index 3d65b1d4c2b..04480c3b68f 100644 --- a/arch/x86_64/kernel/pci-calgary.c +++ b/arch/x86_64/kernel/pci-calgary.c @@ -138,6 +138,8 @@ static const unsigned long phb_debug_offsets[] = { #define PHB_DEBUG_STUFF_OFFSET 0x0020 +#define EMERGENCY_PAGES 32 /* = 128KB */ + unsigned int specified_table_size = TCE_TABLE_SIZE_UNSPECIFIED; static int translate_empty_slots __read_mostly = 0; static int calgary_detected __read_mostly = 0; @@ -296,6 +298,16 @@ static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, { unsigned long entry; unsigned long badbit; + unsigned long badend; + + /* were we called with bad_dma_address? */ + badend = bad_dma_address + (EMERGENCY_PAGES * PAGE_SIZE); + if (unlikely((dma_addr >= bad_dma_address) && (dma_addr < badend))) { + printk(KERN_ERR "Calgary: driver tried unmapping bad DMA " + "address 0x%Lx\n", dma_addr); + WARN_ON(1); + return; + } entry = dma_addr >> PAGE_SHIFT; @@ -656,8 +668,8 @@ static void __init calgary_reserve_regions(struct pci_dev *dev) u64 start; struct iommu_table *tbl = dev->sysdata; - /* reserve bad_dma_address in case it's a legal address */ - iommu_range_reserve(tbl, bad_dma_address, 1); + /* reserve EMERGENCY_PAGES from bad_dma_address and up */ + iommu_range_reserve(tbl, bad_dma_address, EMERGENCY_PAGES); /* avoid the BIOS/VGA first 640KB-1MB region */ start = (640 * 1024); @@ -1176,6 +1188,7 @@ int __init calgary_iommu_init(void) } force_iommu = 1; + bad_dma_address = 0x0; dma_ops = &calgary_dma_ops; return 0; diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c index 683b7a5c1ab..651ccfb0669 100644 --- a/arch/x86_64/kernel/pci-dma.c +++ b/arch/x86_64/kernel/pci-dma.c @@ -223,30 +223,10 @@ int dma_set_mask(struct device *dev, u64 mask) } EXPORT_SYMBOL(dma_set_mask); -/* iommu=[size][,noagp][,off][,force][,noforce][,leak][,memaper[=order]][,merge] - [,forcesac][,fullflush][,nomerge][,biomerge] - size set size of iommu (in bytes) - noagp don't initialize the AGP driver and use full aperture. - off don't use the IOMMU - leak turn on simple iommu leak tracing (only when CONFIG_IOMMU_LEAK is on) - memaper[=order] allocate an own aperture over RAM with size 32MB^order. - noforce don't force IOMMU usage. Default. - force Force IOMMU. - merge Do lazy merging. This may improve performance on some block devices. - Implies force (experimental) - biomerge Do merging at the BIO layer. This is more efficient than merge, - but should be only done with very big IOMMUs. Implies merge,force. - nomerge Don't do SG merging. - forcesac For SAC mode for masks <40bits (experimental) - fullflush Flush IOMMU on each allocation (default) - nofullflush Don't use IOMMU fullflush - allowed overwrite iommu off workarounds for specific chipsets. - soft Use software bounce buffering (default for Intel machines) - noaperture Don't touch the aperture for AGP. - allowdac Allow DMA >4GB - nodac Forbid DMA >4GB - panic Force panic when IOMMU overflows -*/ +/* + * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter + * documentation. + */ __init int iommu_setup(char *p) { iommu_merge = 1; diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index fc1960f1f24..030eb375335 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -185,7 +185,7 @@ static void iommu_full(struct device *dev, size_t size, int dir) static inline int need_iommu(struct device *dev, unsigned long addr, size_t size) { u64 mask = *dev->dma_mask; - int high = addr + size >= mask; + int high = addr + size > mask; int mmu = high; if (force_iommu) mmu = 1; @@ -195,7 +195,7 @@ static inline int need_iommu(struct device *dev, unsigned long addr, size_t size static inline int nonforced_iommu(struct device *dev, unsigned long addr, size_t size) { u64 mask = *dev->dma_mask; - int high = addr + size >= mask; + int high = addr + size > mask; int mmu = high; return mmu; } diff --git a/arch/x86_64/kernel/pmtimer.c b/arch/x86_64/kernel/pmtimer.c index 7554458dc9c..ae8f91214f1 100644 --- a/arch/x86_64/kernel/pmtimer.c +++ b/arch/x86_64/kernel/pmtimer.c @@ -24,15 +24,6 @@ #include <asm/msr.h> #include <asm/vsyscall.h> -/* The I/O port the PMTMR resides at. - * The location is detected during setup_arch(), - * in arch/i386/kernel/acpi/boot.c */ -u32 pmtmr_ioport __read_mostly; - -/* value of the Power timer at last timer interrupt */ -static u32 offset_delay; -static u32 last_pmtmr_tick; - #define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */ static inline u32 cyc2us(u32 cycles) @@ -48,38 +39,6 @@ static inline u32 cyc2us(u32 cycles) return (cycles >> 10); } -int pmtimer_mark_offset(void) -{ - static int first_run = 1; - unsigned long tsc; - u32 lost; - - u32 tick = inl(pmtmr_ioport); - u32 delta; - - delta = cyc2us((tick - last_pmtmr_tick) & ACPI_PM_MASK); - - last_pmtmr_tick = tick; - monotonic_base += delta * NSEC_PER_USEC; - - delta += offset_delay; - - lost = delta / (USEC_PER_SEC / HZ); - offset_delay = delta % (USEC_PER_SEC / HZ); - - rdtscll(tsc); - vxtime.last_tsc = tsc - offset_delay * (u64)cpu_khz / 1000; - - /* don't calculate delay for first run, - or if we've got less then a tick */ - if (first_run || (lost < 1)) { - first_run = 0; - offset_delay = 0; - } - - return lost - 1; -} - static unsigned pmtimer_wait_tick(void) { u32 a, b; @@ -101,23 +60,6 @@ void pmtimer_wait(unsigned us) } while (cyc2us(b - a) < us); } -void pmtimer_resume(void) -{ - last_pmtmr_tick = inl(pmtmr_ioport); -} - -unsigned int do_gettimeoffset_pm(void) -{ - u32 now, offset, delta = 0; - - offset = last_pmtmr_tick; - now = inl(pmtmr_ioport); - delta = (now - offset) & ACPI_PM_MASK; - - return offset_delay + cyc2us(delta); -} - - static int __init nopmtimer_setup(char *s) { pmtmr_ioport = 0; diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c index addc14af0c5..4326a690a50 100644 --- a/arch/x86_64/kernel/ptrace.c +++ b/arch/x86_64/kernel/ptrace.c @@ -536,8 +536,12 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } ret = 0; for (ui = 0; ui < sizeof(struct user_regs_struct); ui += sizeof(long)) { - ret |= __get_user(tmp, (unsigned long __user *) data); - putreg(child, ui, tmp); + ret = __get_user(tmp, (unsigned long __user *) data); + if (ret) + break; + ret = putreg(child, ui, tmp); + if (ret) + break; data += sizeof(long); } break; diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 60477244d1a..3d98b696881 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -138,128 +138,6 @@ struct resource code_resource = { .flags = IORESOURCE_RAM, }; -#define IORESOURCE_ROM (IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM) - -static struct resource system_rom_resource = { - .name = "System ROM", - .start = 0xf0000, - .end = 0xfffff, - .flags = IORESOURCE_ROM, -}; - -static struct resource extension_rom_resource = { - .name = "Extension ROM", - .start = 0xe0000, - .end = 0xeffff, - .flags = IORESOURCE_ROM, -}; - -static struct resource adapter_rom_resources[] = { - { .name = "Adapter ROM", .start = 0xc8000, .end = 0, - .flags = IORESOURCE_ROM }, - { .name = "Adapter ROM", .start = 0, .end = 0, - .flags = IORESOURCE_ROM }, - { .name = "Adapter ROM", .start = 0, .end = 0, - .flags = IORESOURCE_ROM }, - { .name = "Adapter ROM", .start = 0, .end = 0, - .flags = IORESOURCE_ROM }, - { .name = "Adapter ROM", .start = 0, .end = 0, - .flags = IORESOURCE_ROM }, - { .name = "Adapter ROM", .start = 0, .end = 0, - .flags = IORESOURCE_ROM } -}; - -static struct resource video_rom_resource = { - .name = "Video ROM", - .start = 0xc0000, - .end = 0xc7fff, - .flags = IORESOURCE_ROM, -}; - -static struct resource video_ram_resource = { - .name = "Video RAM area", - .start = 0xa0000, - .end = 0xbffff, - .flags = IORESOURCE_RAM, -}; - -#define romsignature(x) (*(unsigned short *)(x) == 0xaa55) - -static int __init romchecksum(unsigned char *rom, unsigned long length) -{ - unsigned char *p, sum = 0; - - for (p = rom; p < rom + length; p++) - sum += *p; - return sum == 0; -} - -static void __init probe_roms(void) -{ - unsigned long start, length, upper; - unsigned char *rom; - int i; - - /* video rom */ - upper = adapter_rom_resources[0].start; - for (start = video_rom_resource.start; start < upper; start += 2048) { - rom = isa_bus_to_virt(start); - if (!romsignature(rom)) - continue; - - video_rom_resource.start = start; - - /* 0 < length <= 0x7f * 512, historically */ - length = rom[2] * 512; - - /* if checksum okay, trust length byte */ - if (length && romchecksum(rom, length)) - video_rom_resource.end = start + length - 1; - - request_resource(&iomem_resource, &video_rom_resource); - break; - } - - start = (video_rom_resource.end + 1 + 2047) & ~2047UL; - if (start < upper) - start = upper; - - /* system rom */ - request_resource(&iomem_resource, &system_rom_resource); - upper = system_rom_resource.start; - - /* check for extension rom (ignore length byte!) */ - rom = isa_bus_to_virt(extension_rom_resource.start); - if (romsignature(rom)) { - length = extension_rom_resource.end - extension_rom_resource.start + 1; - if (romchecksum(rom, length)) { - request_resource(&iomem_resource, &extension_rom_resource); - upper = extension_rom_resource.start; - } - } - - /* check for adapter roms on 2k boundaries */ - for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; - start += 2048) { - rom = isa_bus_to_virt(start); - if (!romsignature(rom)) - continue; - - /* 0 < length <= 0x7f * 512, historically */ - length = rom[2] * 512; - - /* but accept any length that fits if checksum okay */ - if (!length || start + length > upper || !romchecksum(rom, length)) - continue; - - adapter_rom_resources[i].start = start; - adapter_rom_resources[i].end = start + length - 1; - request_resource(&iomem_resource, &adapter_rom_resources[i]); - - start = adapter_rom_resources[i++].end & ~2047UL; - } -} - #ifdef CONFIG_PROC_VMCORE /* elfcorehdr= specifies the location of elf core header * stored by the crashed kernel. This option will be passed @@ -444,6 +322,11 @@ void __init setup_arch(char **cmdline_p) /* reserve ebda region */ if (ebda_addr) reserve_bootmem_generic(ebda_addr, ebda_size); +#ifdef CONFIG_NUMA + /* reserve nodemap region */ + if (nodemap_addr) + reserve_bootmem_generic(nodemap_addr, nodemap_size); +#endif #ifdef CONFIG_SMP /* @@ -519,15 +402,11 @@ void __init setup_arch(char **cmdline_p) init_apic_mappings(); /* - * Request address space for all standard RAM and ROM resources - * and also for regions reported as reserved by the e820. - */ - probe_roms(); + * We trust e820 completely. No explicit ROM probing in memory. + */ e820_reserve_resources(); e820_mark_nosave_regions(); - request_resource(&iomem_resource, &video_ram_resource); - { unsigned i; /* request I/O space for devices used on all i[345]86 PCs */ @@ -1063,7 +942,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, "nx", NULL, "mmxext", NULL, - NULL, "fxsr_opt", NULL, "rdtscp", NULL, "lm", "3dnowext", "3dnow", + NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", + "3dnowext", "3dnow", /* Transmeta-defined */ "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL, @@ -1081,7 +961,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) /* Intel-defined (#2) */ "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, - NULL, NULL, "dca", NULL, NULL, NULL, NULL, NULL, + NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* VIA/Cyrix/Centaur-defined */ @@ -1091,8 +971,10 @@ static int show_cpuinfo(struct seq_file *m, void *v) NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* AMD-defined (#2) */ - "lahf_lm", "cmp_legacy", "svm", NULL, "cr8_legacy", NULL, NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy", + "altmovcr8", "abm", "sse4a", + "misalignsse", "3dnowprefetch", + "osvw", "ibs", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, }; @@ -1103,6 +985,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) "ttp", /* thermal trip */ "tm", "stc", + "100mhzsteps", + "hwpstate", + NULL, /* tsc invariant mapped to constant_tsc */ NULL, /* nothing */ /* constant_tsc - moved to flags */ }; @@ -1219,23 +1104,3 @@ struct seq_operations cpuinfo_op = { .stop = c_stop, .show = show_cpuinfo, }; - -#if defined(CONFIG_INPUT_PCSPKR) || defined(CONFIG_INPUT_PCSPKR_MODULE) -#include <linux/platform_device.h> -static __init int add_pcspkr(void) -{ - struct platform_device *pd; - int ret; - - pd = platform_device_alloc("pcspkr", -1); - if (!pd) - return -ENOMEM; - - ret = platform_device_add(pd); - if (ret) - platform_device_put(pd); - - return ret; -} -device_initcall(add_pcspkr); -#endif diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index 8c4b80fe71a..6a70b55f719 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -37,7 +37,6 @@ struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned"))); unsigned long __supported_pte_mask __read_mostly = ~0UL; -EXPORT_SYMBOL(__supported_pte_mask); static int do_not_nx __cpuinitdata = 0; /* noexec=on|off diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index daf19332f0d..35443729aad 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -148,217 +148,6 @@ static void __cpuinit smp_store_cpu_info(int id) print_cpu_info(c); } -/* - * New Funky TSC sync algorithm borrowed from IA64. - * Main advantage is that it doesn't reset the TSCs fully and - * in general looks more robust and it works better than my earlier - * attempts. I believe it was written by David Mosberger. Some minor - * adjustments for x86-64 by me -AK - * - * Original comment reproduced below. - * - * Synchronize TSC of the current (slave) CPU with the TSC of the - * MASTER CPU (normally the time-keeper CPU). We use a closed loop to - * eliminate the possibility of unaccounted-for errors (such as - * getting a machine check in the middle of a calibration step). The - * basic idea is for the slave to ask the master what itc value it has - * and to read its own itc before and after the master responds. Each - * iteration gives us three timestamps: - * - * slave master - * - * t0 ---\ - * ---\ - * ---> - * tm - * /--- - * /--- - * t1 <--- - * - * - * The goal is to adjust the slave's TSC such that tm falls exactly - * half-way between t0 and t1. If we achieve this, the clocks are - * synchronized provided the interconnect between the slave and the - * master is symmetric. Even if the interconnect were asymmetric, we - * would still know that the synchronization error is smaller than the - * roundtrip latency (t0 - t1). - * - * When the interconnect is quiet and symmetric, this lets us - * synchronize the TSC to within one or two cycles. However, we can - * only *guarantee* that the synchronization is accurate to within a - * round-trip time, which is typically in the range of several hundred - * cycles (e.g., ~500 cycles). In practice, this means that the TSCs - * are usually almost perfectly synchronized, but we shouldn't assume - * that the accuracy is much better than half a micro second or so. - * - * [there are other errors like the latency of RDTSC and of the - * WRMSR. These can also account to hundreds of cycles. So it's - * probably worse. It claims 153 cycles error on a dual Opteron, - * but I suspect the numbers are actually somewhat worse -AK] - */ - -#define MASTER 0 -#define SLAVE (SMP_CACHE_BYTES/8) - -/* Intentionally don't use cpu_relax() while TSC synchronization - because we don't want to go into funky power save modi or cause - hypervisors to schedule us away. Going to sleep would likely affect - latency and low latency is the primary objective here. -AK */ -#define no_cpu_relax() barrier() - -static __cpuinitdata DEFINE_SPINLOCK(tsc_sync_lock); -static volatile __cpuinitdata unsigned long go[SLAVE + 1]; -static int notscsync __cpuinitdata; - -#undef DEBUG_TSC_SYNC - -#define NUM_ROUNDS 64 /* magic value */ -#define NUM_ITERS 5 /* likewise */ - -/* Callback on boot CPU */ -static __cpuinit void sync_master(void *arg) -{ - unsigned long flags, i; - - go[MASTER] = 0; - - local_irq_save(flags); - { - for (i = 0; i < NUM_ROUNDS*NUM_ITERS; ++i) { - while (!go[MASTER]) - no_cpu_relax(); - go[MASTER] = 0; - rdtscll(go[SLAVE]); - } - } - local_irq_restore(flags); -} - -/* - * Return the number of cycles by which our tsc differs from the tsc - * on the master (time-keeper) CPU. A positive number indicates our - * tsc is ahead of the master, negative that it is behind. - */ -static inline long -get_delta(long *rt, long *master) -{ - unsigned long best_t0 = 0, best_t1 = ~0UL, best_tm = 0; - unsigned long tcenter, t0, t1, tm; - int i; - - for (i = 0; i < NUM_ITERS; ++i) { - rdtscll(t0); - go[MASTER] = 1; - while (!(tm = go[SLAVE])) - no_cpu_relax(); - go[SLAVE] = 0; - rdtscll(t1); - - if (t1 - t0 < best_t1 - best_t0) - best_t0 = t0, best_t1 = t1, best_tm = tm; - } - - *rt = best_t1 - best_t0; - *master = best_tm - best_t0; - - /* average best_t0 and best_t1 without overflow: */ - tcenter = (best_t0/2 + best_t1/2); - if (best_t0 % 2 + best_t1 % 2 == 2) - ++tcenter; - return tcenter - best_tm; -} - -static __cpuinit void sync_tsc(unsigned int master) -{ - int i, done = 0; - long delta, adj, adjust_latency = 0; - unsigned long flags, rt, master_time_stamp, bound; -#ifdef DEBUG_TSC_SYNC - static struct syncdebug { - long rt; /* roundtrip time */ - long master; /* master's timestamp */ - long diff; /* difference between midpoint and master's timestamp */ - long lat; /* estimate of tsc adjustment latency */ - } t[NUM_ROUNDS] __cpuinitdata; -#endif - - printk(KERN_INFO "CPU %d: Syncing TSC to CPU %u.\n", - smp_processor_id(), master); - - go[MASTER] = 1; - - /* It is dangerous to broadcast IPI as cpus are coming up, - * as they may not be ready to accept them. So since - * we only need to send the ipi to the boot cpu direct - * the message, and avoid the race. - */ - smp_call_function_single(master, sync_master, NULL, 1, 0); - - while (go[MASTER]) /* wait for master to be ready */ - no_cpu_relax(); - - spin_lock_irqsave(&tsc_sync_lock, flags); - { - for (i = 0; i < NUM_ROUNDS; ++i) { - delta = get_delta(&rt, &master_time_stamp); - if (delta == 0) { - done = 1; /* let's lock on to this... */ - bound = rt; - } - - if (!done) { - unsigned long t; - if (i > 0) { - adjust_latency += -delta; - adj = -delta + adjust_latency/4; - } else - adj = -delta; - - rdtscll(t); - wrmsrl(MSR_IA32_TSC, t + adj); - } -#ifdef DEBUG_TSC_SYNC - t[i].rt = rt; - t[i].master = master_time_stamp; - t[i].diff = delta; - t[i].lat = adjust_latency/4; -#endif - } - } - spin_unlock_irqrestore(&tsc_sync_lock, flags); - -#ifdef DEBUG_TSC_SYNC - for (i = 0; i < NUM_ROUNDS; ++i) - printk("rt=%5ld master=%5ld diff=%5ld adjlat=%5ld\n", - t[i].rt, t[i].master, t[i].diff, t[i].lat); -#endif - - printk(KERN_INFO - "CPU %d: synchronized TSC with CPU %u (last diff %ld cycles, " - "maxerr %lu cycles)\n", - smp_processor_id(), master, delta, rt); -} - -static void __cpuinit tsc_sync_wait(void) -{ - /* - * When the CPU has synchronized TSCs assume the BIOS - * or the hardware already synced. Otherwise we could - * mess up a possible perfect synchronization with a - * not-quite-perfect algorithm. - */ - if (notscsync || !cpu_has_tsc || !unsynchronized_tsc()) - return; - sync_tsc(0); -} - -static __init int notscsync_setup(char *s) -{ - notscsync = 1; - return 1; -} -__setup("notscsync", notscsync_setup); - static atomic_t init_deasserted __cpuinitdata; /* @@ -546,6 +335,11 @@ void __cpuinit start_secondary(void) /* otherwise gcc will move up the smp_processor_id before the cpu_init */ barrier(); + /* + * Check TSC sync first: + */ + check_tsc_sync_target(); + Dprintk("cpu %d: setting up apic clock\n", smp_processor_id()); setup_secondary_APIC_clock(); @@ -565,14 +359,6 @@ void __cpuinit start_secondary(void) */ set_cpu_sibling_map(smp_processor_id()); - /* - * Wait for TSC sync to not schedule things before. - * We still process interrupts, which could see an inconsistent - * time in that window unfortunately. - * Do this here because TSC sync has global unprotected state. - */ - tsc_sync_wait(); - /* * We need to hold call_lock, so there is no inconsistency * between the time smp_call_function() determines number of @@ -592,6 +378,7 @@ void __cpuinit start_secondary(void) cpu_set(smp_processor_id(), cpu_online_map); per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; spin_unlock(&vector_lock); + unlock_ipi_call_lock(); cpu_idle(); @@ -1168,6 +955,11 @@ int __cpuinit __cpu_up(unsigned int cpu) /* Unleash the CPU! */ Dprintk("waiting for cpu %d\n", cpu); + /* + * Make sure and check TSC sync: + */ + check_tsc_sync_source(cpu); + while (!cpu_isset(cpu, cpu_online_map)) cpu_relax(); @@ -1190,7 +982,6 @@ void __init smp_cpus_done(unsigned int max_cpus) smp_cleanup_boot(); setup_ioapic_dest(); check_nmi_watchdog(); - time_init_gtod(); } #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/x86_64/kernel/stacktrace.c b/arch/x86_64/kernel/stacktrace.c index 6026b31d037..65ac2c6b34a 100644 --- a/arch/x86_64/kernel/stacktrace.c +++ b/arch/x86_64/kernel/stacktrace.c @@ -32,7 +32,7 @@ static void save_stack_address(void *data, unsigned long addr) trace->skip--; return; } - if (trace->nr_entries < trace->max_entries - 1) + if (trace->nr_entries < trace->max_entries) trace->entries[trace->nr_entries++] = addr; } @@ -49,7 +49,8 @@ static struct stacktrace_ops save_stack_ops = { void save_stack_trace(struct stack_trace *trace, struct task_struct *task) { dump_trace(task, NULL, NULL, &save_stack_ops, trace); - trace->entries[trace->nr_entries++] = ULONG_MAX; + if (trace->nr_entries < trace->max_entries) + trace->entries[trace->nr_entries++] = ULONG_MAX; } EXPORT_SYMBOL(save_stack_trace); diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 335cc91c49b..a87c5170562 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -42,10 +42,8 @@ #include <linux/cpufreq.h> #include <linux/hpet.h> #include <asm/apic.h> +#include <asm/hpet.h> -#ifdef CONFIG_CPU_FREQ -static void cpufreq_delayed_get(void); -#endif extern void i8254_timer_resume(void); extern int using_apic_timer; @@ -55,128 +53,7 @@ DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); DEFINE_SPINLOCK(i8253_lock); -int nohpet __initdata = 0; -static int notsc __initdata = 0; - -#define USEC_PER_TICK (USEC_PER_SEC / HZ) -#define NSEC_PER_TICK (NSEC_PER_SEC / HZ) -#define FSEC_PER_TICK (FSEC_PER_SEC / HZ) - -#define NS_SCALE 10 /* 2^10, carefully chosen */ -#define US_SCALE 32 /* 2^32, arbitralrily chosen */ - -unsigned int cpu_khz; /* TSC clocks / usec, not used here */ -EXPORT_SYMBOL(cpu_khz); -static unsigned long hpet_period; /* fsecs / HPET clock */ -unsigned long hpet_tick; /* HPET clocks / interrupt */ -int hpet_use_timer; /* Use counter of hpet for time keeping, otherwise PIT */ -unsigned long vxtime_hz = PIT_TICK_RATE; -int report_lost_ticks; /* command line option */ -unsigned long long monotonic_base; - -struct vxtime_data __vxtime __section_vxtime; /* for vsyscalls */ - volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES; -struct timespec __xtime __section_xtime; -struct timezone __sys_tz __section_sys_tz; - -/* - * do_gettimeoffset() returns microseconds since last timer interrupt was - * triggered by hardware. A memory read of HPET is slower than a register read - * of TSC, but much more reliable. It's also synchronized to the timer - * interrupt. Note that do_gettimeoffset() may return more than hpet_tick, if a - * timer interrupt has happened already, but vxtime.trigger wasn't updated yet. - * This is not a problem, because jiffies hasn't updated either. They are bound - * together by xtime_lock. - */ - -static inline unsigned int do_gettimeoffset_tsc(void) -{ - unsigned long t; - unsigned long x; - t = get_cycles_sync(); - if (t < vxtime.last_tsc) - t = vxtime.last_tsc; /* hack */ - x = ((t - vxtime.last_tsc) * vxtime.tsc_quot) >> US_SCALE; - return x; -} - -static inline unsigned int do_gettimeoffset_hpet(void) -{ - /* cap counter read to one tick to avoid inconsistencies */ - unsigned long counter = hpet_readl(HPET_COUNTER) - vxtime.last; - return (min(counter,hpet_tick) * vxtime.quot) >> US_SCALE; -} - -unsigned int (*do_gettimeoffset)(void) = do_gettimeoffset_tsc; - -/* - * This version of gettimeofday() has microsecond resolution and better than - * microsecond precision, as we're using at least a 10 MHz (usually 14.31818 - * MHz) HPET timer. - */ - -void do_gettimeofday(struct timeval *tv) -{ - unsigned long seq; - unsigned int sec, usec; - - do { - seq = read_seqbegin(&xtime_lock); - - sec = xtime.tv_sec; - usec = xtime.tv_nsec / NSEC_PER_USEC; - - /* i386 does some correction here to keep the clock - monotonous even when ntpd is fixing drift. - But they didn't work for me, there is a non monotonic - clock anyways with ntp. - I dropped all corrections now until a real solution can - be found. Note when you fix it here you need to do the same - in arch/x86_64/kernel/vsyscall.c and export all needed - variables in vmlinux.lds. -AK */ - usec += do_gettimeoffset(); - - } while (read_seqretry(&xtime_lock, seq)); - - tv->tv_sec = sec + usec / USEC_PER_SEC; - tv->tv_usec = usec % USEC_PER_SEC; -} - -EXPORT_SYMBOL(do_gettimeofday); - -/* - * settimeofday() first undoes the correction that gettimeofday would do - * on the time, and then saves it. This is ugly, but has been like this for - * ages already. - */ - -int do_settimeofday(struct timespec *tv) -{ - time_t wtm_sec, sec = tv->tv_sec; - long wtm_nsec, nsec = tv->tv_nsec; - - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - write_seqlock_irq(&xtime_lock); - - nsec -= do_gettimeoffset() * NSEC_PER_USEC; - - wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); - wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); - - set_normalized_timespec(&xtime, sec, nsec); - set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - - ntp_clear(); - - write_sequnlock_irq(&xtime_lock); - clock_was_set(); - return 0; -} - -EXPORT_SYMBOL(do_settimeofday); unsigned long profile_pc(struct pt_regs *regs) { @@ -267,84 +144,9 @@ static void set_rtc_mmss(unsigned long nowtime) } -/* monotonic_clock(): returns # of nanoseconds passed since time_init() - * Note: This function is required to return accurate - * time even in the absence of multiple timer ticks. - */ -static inline unsigned long long cycles_2_ns(unsigned long long cyc); -unsigned long long monotonic_clock(void) -{ - unsigned long seq; - u32 last_offset, this_offset, offset; - unsigned long long base; - - if (vxtime.mode == VXTIME_HPET) { - do { - seq = read_seqbegin(&xtime_lock); - - last_offset = vxtime.last; - base = monotonic_base; - this_offset = hpet_readl(HPET_COUNTER); - } while (read_seqretry(&xtime_lock, seq)); - offset = (this_offset - last_offset); - offset *= NSEC_PER_TICK / hpet_tick; - } else { - do { - seq = read_seqbegin(&xtime_lock); - - last_offset = vxtime.last_tsc; - base = monotonic_base; - } while (read_seqretry(&xtime_lock, seq)); - this_offset = get_cycles_sync(); - offset = cycles_2_ns(this_offset - last_offset); - } - return base + offset; -} -EXPORT_SYMBOL(monotonic_clock); - -static noinline void handle_lost_ticks(int lost) -{ - static long lost_count; - static int warned; - if (report_lost_ticks) { - printk(KERN_WARNING "time.c: Lost %d timer tick(s)! ", lost); - print_symbol("rip %s)\n", get_irq_regs()->rip); - } - - if (lost_count == 1000 && !warned) { - printk(KERN_WARNING "warning: many lost ticks.\n" - KERN_WARNING "Your time source seems to be instable or " - "some driver is hogging interupts\n"); - print_symbol("rip %s\n", get_irq_regs()->rip); - if (vxtime.mode == VXTIME_TSC && vxtime.hpet_address) { - printk(KERN_WARNING "Falling back to HPET\n"); - if (hpet_use_timer) - vxtime.last = hpet_readl(HPET_T0_CMP) - - hpet_tick; - else - vxtime.last = hpet_readl(HPET_COUNTER); - vxtime.mode = VXTIME_HPET; - do_gettimeoffset = do_gettimeoffset_hpet; - } - /* else should fall back to PIT, but code missing. */ - warned = 1; - } else - lost_count++; - -#ifdef CONFIG_CPU_FREQ - /* In some cases the CPU can change frequency without us noticing - Give cpufreq a change to catch up. */ - if ((lost_count+1) % 25 == 0) - cpufreq_delayed_get(); -#endif -} - void main_timer_handler(void) { static unsigned long rtc_update = 0; - unsigned long tsc; - int delay = 0, offset = 0, lost = 0; - /* * Here we are in the timer irq handler. We have irqs locally disabled (so we * don't need spin_lock_irqsave()) but we don't know if the timer_bh is running @@ -354,72 +156,11 @@ void main_timer_handler(void) write_seqlock(&xtime_lock); - if (vxtime.hpet_address) - offset = hpet_readl(HPET_COUNTER); - - if (hpet_use_timer) { - /* if we're using the hpet timer functionality, - * we can more accurately know the counter value - * when the timer interrupt occured. - */ - offset = hpet_readl(HPET_T0_CMP) - hpet_tick; - delay = hpet_readl(HPET_COUNTER) - offset; - } else if (!pmtmr_ioport) { - spin_lock(&i8253_lock); - outb_p(0x00, 0x43); - delay = inb_p(0x40); - delay |= inb(0x40) << 8; - spin_unlock(&i8253_lock); - delay = LATCH - 1 - delay; - } - - tsc = get_cycles_sync(); - - if (vxtime.mode == VXTIME_HPET) { - if (offset - vxtime.last > hpet_tick) { - lost = (offset - vxtime.last) / hpet_tick - 1; - } - - monotonic_base += - (offset - vxtime.last) * NSEC_PER_TICK / hpet_tick; - - vxtime.last = offset; -#ifdef CONFIG_X86_PM_TIMER - } else if (vxtime.mode == VXTIME_PMTMR) { - lost = pmtimer_mark_offset(); -#endif - } else { - offset = (((tsc - vxtime.last_tsc) * - vxtime.tsc_quot) >> US_SCALE) - USEC_PER_TICK; - - if (offset < 0) - offset = 0; - - if (offset > USEC_PER_TICK) { - lost = offset / USEC_PER_TICK; - offset %= USEC_PER_TICK; - } - - monotonic_base += cycles_2_ns(tsc - vxtime.last_tsc); - - vxtime.last_tsc = tsc - vxtime.quot * delay / vxtime.tsc_quot; - - if ((((tsc - vxtime.last_tsc) * - vxtime.tsc_quot) >> US_SCALE) < offset) - vxtime.last_tsc = tsc - - (((long) offset << US_SCALE) / vxtime.tsc_quot) - 1; - } - - if (lost > 0) - handle_lost_ticks(lost); - else - lost = 0; - /* * Do the timer stuff. */ - do_timer(lost + 1); + do_timer(1); #ifndef CONFIG_SMP update_process_times(user_mode(get_irq_regs())); #endif @@ -460,40 +201,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static unsigned int cyc2ns_scale __read_mostly; - -static inline void set_cyc2ns_scale(unsigned long cpu_khz) -{ - cyc2ns_scale = (NSEC_PER_MSEC << NS_SCALE) / cpu_khz; -} - -static inline unsigned long long cycles_2_ns(unsigned long long cyc) -{ - return (cyc * cyc2ns_scale) >> NS_SCALE; -} - -unsigned long long sched_clock(void) -{ - unsigned long a = 0; - -#if 0 - /* Don't do a HPET read here. Using TSC always is much faster - and HPET may not be mapped yet when the scheduler first runs. - Disadvantage is a small drift between CPUs in some configurations, - but that should be tolerable. */ - if (__vxtime.mode == VXTIME_HPET) - return (hpet_readl(HPET_COUNTER) * vxtime.quot) >> US_SCALE; -#endif - - /* Could do CPU core sync here. Opteron can execute rdtsc speculatively, - which means it is not completely exact and may not be monotonous between - CPUs. But the errors should be too small to matter for scheduling - purposes. */ - - rdtscll(a); - return cycles_2_ns(a); -} - static unsigned long get_cmos_time(void) { unsigned int year, mon, day, hour, min, sec; @@ -545,159 +252,6 @@ static unsigned long get_cmos_time(void) return mktime(year, mon, day, hour, min, sec); } -#ifdef CONFIG_CPU_FREQ - -/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency - changes. - - RED-PEN: On SMP we assume all CPUs run with the same frequency. It's - not that important because current Opteron setups do not support - scaling on SMP anyroads. - - Should fix up last_tsc too. Currently gettimeofday in the - first tick after the change will be slightly wrong. */ - -#include <linux/workqueue.h> - -static unsigned int cpufreq_delayed_issched = 0; -static unsigned int cpufreq_init = 0; -static struct work_struct cpufreq_delayed_get_work; - -static void handle_cpufreq_delayed_get(struct work_struct *v) -{ - unsigned int cpu; - for_each_online_cpu(cpu) { - cpufreq_get(cpu); - } - cpufreq_delayed_issched = 0; -} - -/* if we notice lost ticks, schedule a call to cpufreq_get() as it tries - * to verify the CPU frequency the timing core thinks the CPU is running - * at is still correct. - */ -static void cpufreq_delayed_get(void) -{ - static int warned; - if (cpufreq_init && !cpufreq_delayed_issched) { - cpufreq_delayed_issched = 1; - if (!warned) { - warned = 1; - printk(KERN_DEBUG - "Losing some ticks... checking if CPU frequency changed.\n"); - } - schedule_work(&cpufreq_delayed_get_work); - } -} - -static unsigned int ref_freq = 0; -static unsigned long loops_per_jiffy_ref = 0; - -static unsigned long cpu_khz_ref = 0; - -static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, - void *data) -{ - struct cpufreq_freqs *freq = data; - unsigned long *lpj, dummy; - - if (cpu_has(&cpu_data[freq->cpu], X86_FEATURE_CONSTANT_TSC)) - return 0; - - lpj = &dummy; - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) -#ifdef CONFIG_SMP - lpj = &cpu_data[freq->cpu].loops_per_jiffy; -#else - lpj = &boot_cpu_data.loops_per_jiffy; -#endif - - if (!ref_freq) { - ref_freq = freq->old; - loops_per_jiffy_ref = *lpj; - cpu_khz_ref = cpu_khz; - } - if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || - (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || - (val == CPUFREQ_RESUMECHANGE)) { - *lpj = - cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new); - - cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new); - if (!(freq->flags & CPUFREQ_CONST_LOOPS)) - vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz; - } - - set_cyc2ns_scale(cpu_khz_ref); - - return 0; -} - -static struct notifier_block time_cpufreq_notifier_block = { - .notifier_call = time_cpufreq_notifier -}; - -static int __init cpufreq_tsc(void) -{ - INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get); - if (!cpufreq_register_notifier(&time_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER)) - cpufreq_init = 1; - return 0; -} - -core_initcall(cpufreq_tsc); - -#endif - -/* - * calibrate_tsc() calibrates the processor TSC in a very simple way, comparing - * it to the HPET timer of known frequency. - */ - -#define TICK_COUNT 100000000 -#define TICK_MIN 5000 - -/* - * Some platforms take periodic SMI interrupts with 5ms duration. Make sure none - * occurs between the reads of the hpet & TSC. - */ -static void __init read_hpet_tsc(int *hpet, int *tsc) -{ - int tsc1, tsc2, hpet1; - - do { - tsc1 = get_cycles_sync(); - hpet1 = hpet_readl(HPET_COUNTER); - tsc2 = get_cycles_sync(); - } while (tsc2 - tsc1 > TICK_MIN); - *hpet = hpet1; - *tsc = tsc2; -} - - -static unsigned int __init hpet_calibrate_tsc(void) -{ - int tsc_start, hpet_start; - int tsc_now, hpet_now; - unsigned long flags; - - local_irq_save(flags); - local_irq_disable(); - - read_hpet_tsc(&hpet_start, &tsc_start); - - do { - local_irq_disable(); - read_hpet_tsc(&hpet_now, &tsc_now); - local_irq_restore(flags); - } while ((tsc_now - tsc_start) < TICK_COUNT && - (hpet_now - hpet_start) < TICK_COUNT); - - return (tsc_now - tsc_start) * 1000000000L - / ((hpet_now - hpet_start) * hpet_period / 1000); -} - /* * pit_calibrate_tsc() uses the speaker output (channel 2) of @@ -728,124 +282,6 @@ static unsigned int __init pit_calibrate_tsc(void) return (end - start) / 50; } -#ifdef CONFIG_HPET -static __init int late_hpet_init(void) -{ - struct hpet_data hd; - unsigned int ntimer; - - if (!vxtime.hpet_address) - return 0; - - memset(&hd, 0, sizeof (hd)); - - ntimer = hpet_readl(HPET_ID); - ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT; - ntimer++; - - /* - * Register with driver. - * Timer0 and Timer1 is used by platform. - */ - hd.hd_phys_address = vxtime.hpet_address; - hd.hd_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE); - hd.hd_nirqs = ntimer; - hd.hd_flags = HPET_DATA_PLATFORM; - hpet_reserve_timer(&hd, 0); -#ifdef CONFIG_HPET_EMULATE_RTC - hpet_reserve_timer(&hd, 1); -#endif - hd.hd_irq[0] = HPET_LEGACY_8254; - hd.hd_irq[1] = HPET_LEGACY_RTC; - if (ntimer > 2) { - struct hpet *hpet; - struct hpet_timer *timer; - int i; - - hpet = (struct hpet *) fix_to_virt(FIX_HPET_BASE); - timer = &hpet->hpet_timers[2]; - for (i = 2; i < ntimer; timer++, i++) - hd.hd_irq[i] = (timer->hpet_config & - Tn_INT_ROUTE_CNF_MASK) >> - Tn_INT_ROUTE_CNF_SHIFT; - - } - - hpet_alloc(&hd); - return 0; -} -fs_initcall(late_hpet_init); -#endif - -static int hpet_timer_stop_set_go(unsigned long tick) -{ - unsigned int cfg; - -/* - * Stop the timers and reset the main counter. - */ - - cfg = hpet_readl(HPET_CFG); - cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY); - hpet_writel(cfg, HPET_CFG); - hpet_writel(0, HPET_COUNTER); - hpet_writel(0, HPET_COUNTER + 4); - -/* - * Set up timer 0, as periodic with first interrupt to happen at hpet_tick, - * and period also hpet_tick. - */ - if (hpet_use_timer) { - hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | - HPET_TN_32BIT, HPET_T0_CFG); - hpet_writel(hpet_tick, HPET_T0_CMP); /* next interrupt */ - hpet_writel(hpet_tick, HPET_T0_CMP); /* period */ - cfg |= HPET_CFG_LEGACY; - } -/* - * Go! - */ - - cfg |= HPET_CFG_ENABLE; - hpet_writel(cfg, HPET_CFG); - - return 0; -} - -static int hpet_init(void) -{ - unsigned int id; - - if (!vxtime.hpet_address) - return -1; - set_fixmap_nocache(FIX_HPET_BASE, vxtime.hpet_address); - __set_fixmap(VSYSCALL_HPET, vxtime.hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); - -/* - * Read the period, compute tick and quotient. - */ - - id = hpet_readl(HPET_ID); - - if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER)) - return -1; - - hpet_period = hpet_readl(HPET_PERIOD); - if (hpet_period < 100000 || hpet_period > 100000000) - return -1; - - hpet_tick = (FSEC_PER_TICK + hpet_period / 2) / hpet_period; - - hpet_use_timer = (id & HPET_ID_LEGSUP); - - return hpet_timer_stop_set_go(hpet_tick); -} - -static int hpet_reenable(void) -{ - return hpet_timer_stop_set_go(hpet_tick); -} - #define PIT_MODE 0x43 #define PIT_CH0 0x40 @@ -873,7 +309,7 @@ void __init pit_stop_interrupt(void) void __init stop_timer_interrupt(void) { char *name; - if (vxtime.hpet_address) { + if (hpet_address) { name = "HPET"; hpet_timer_stop_set_go(0); } else { @@ -883,12 +319,6 @@ void __init stop_timer_interrupt(void) printk(KERN_INFO "timer: %s interrupt stopped.\n", name); } -int __init time_setup(char *str) -{ - report_lost_ticks = 1; - return 1; -} - static struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL }; @@ -896,124 +326,41 @@ static struct irqaction irq0 = { void __init time_init(void) { if (nohpet) - vxtime.hpet_address = 0; - + hpet_address = 0; xtime.tv_sec = get_cmos_time(); xtime.tv_nsec = 0; set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); - if (!hpet_init()) - vxtime_hz = (FSEC_PER_SEC + hpet_period / 2) / hpet_period; - else - vxtime.hpet_address = 0; + if (hpet_arch_init()) + hpet_address = 0; if (hpet_use_timer) { /* set tick_nsec to use the proper rate for HPET */ tick_nsec = TICK_NSEC_HPET; cpu_khz = hpet_calibrate_tsc(); timename = "HPET"; -#ifdef CONFIG_X86_PM_TIMER - } else if (pmtmr_ioport && !vxtime.hpet_address) { - vxtime_hz = PM_TIMER_FREQUENCY; - timename = "PM"; - pit_init(); - cpu_khz = pit_calibrate_tsc(); -#endif } else { pit_init(); cpu_khz = pit_calibrate_tsc(); timename = "PIT"; } - vxtime.mode = VXTIME_TSC; - vxtime.quot = (USEC_PER_SEC << US_SCALE) / vxtime_hz; - vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz; - vxtime.last_tsc = get_cycles_sync(); - set_cyc2ns_scale(cpu_khz); - setup_irq(0, &irq0); - -#ifndef CONFIG_SMP - time_init_gtod(); -#endif -} - -/* - * Make an educated guess if the TSC is trustworthy and synchronized - * over all CPUs. - */ -__cpuinit int unsynchronized_tsc(void) -{ -#ifdef CONFIG_SMP - if (apic_is_clustered_box()) - return 1; -#endif - /* Most intel systems have synchronized TSCs except for - multi node systems */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) { -#ifdef CONFIG_ACPI - /* But TSC doesn't tick in C3 so don't use it there */ - if (acpi_gbl_FADT.header.length > 0 && acpi_gbl_FADT.C3latency < 1000) - return 1; -#endif - return 0; - } - - /* Assume multi socket systems are not synchronized */ - return num_present_cpus() > 1; -} - -/* - * Decide what mode gettimeofday should use. - */ -void time_init_gtod(void) -{ - char *timetype; - if (unsynchronized_tsc()) - notsc = 1; + mark_tsc_unstable(); - if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP)) + if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP)) vgetcpu_mode = VGETCPU_RDTSCP; else vgetcpu_mode = VGETCPU_LSL; - if (vxtime.hpet_address && notsc) { - timetype = hpet_use_timer ? "HPET" : "PIT/HPET"; - if (hpet_use_timer) - vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick; - else - vxtime.last = hpet_readl(HPET_COUNTER); - vxtime.mode = VXTIME_HPET; - do_gettimeoffset = do_gettimeoffset_hpet; -#ifdef CONFIG_X86_PM_TIMER - /* Using PM for gettimeofday is quite slow, but we have no other - choice because the TSC is too unreliable on some systems. */ - } else if (pmtmr_ioport && !vxtime.hpet_address && notsc) { - timetype = "PM"; - do_gettimeoffset = do_gettimeoffset_pm; - vxtime.mode = VXTIME_PMTMR; - sysctl_vsyscall = 0; - printk(KERN_INFO "Disabling vsyscall due to use of PM timer\n"); -#endif - } else { - timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC"; - vxtime.mode = VXTIME_TSC; - } - - printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n", - vxtime_hz / 1000000, vxtime_hz % 1000000, timename, timetype); + set_cyc2ns_scale(cpu_khz); printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000); - vxtime.quot = (USEC_PER_SEC << US_SCALE) / vxtime_hz; - vxtime.tsc_quot = (USEC_PER_MSEC << US_SCALE) / cpu_khz; - vxtime.last_tsc = get_cycles_sync(); - - set_cyc2ns_scale(cpu_khz); + setup_irq(0, &irq0); } -__setup("report_lost_ticks", time_setup); static long clock_cmos_diff; static unsigned long sleep_start; @@ -1050,7 +397,7 @@ static int timer_resume(struct sys_device *dev) sleep_length = 0; ctime = sleep_start; } - if (vxtime.hpet_address) + if (hpet_address) hpet_reenable(); else i8254_timer_resume(); @@ -1059,20 +406,8 @@ static int timer_resume(struct sys_device *dev) write_seqlock_irqsave(&xtime_lock,flags); xtime.tv_sec = sec; xtime.tv_nsec = 0; - if (vxtime.mode == VXTIME_HPET) { - if (hpet_use_timer) - vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick; - else - vxtime.last = hpet_readl(HPET_COUNTER); -#ifdef CONFIG_X86_PM_TIMER - } else if (vxtime.mode == VXTIME_PMTMR) { - pmtimer_resume(); -#endif - } else - vxtime.last_tsc = get_cycles_sync(); - write_sequnlock_irqrestore(&xtime_lock,flags); jiffies += sleep_length; - monotonic_base += sleep_length * (NSEC_PER_SEC/HZ); + write_sequnlock_irqrestore(&xtime_lock,flags); touch_softlockup_watchdog(); return 0; } @@ -1098,269 +433,3 @@ static int time_init_device(void) } device_initcall(time_init_device); - -#ifdef CONFIG_HPET_EMULATE_RTC -/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET - * is enabled, we support RTC interrupt functionality in software. - * RTC has 3 kinds of interrupts: - * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock - * is updated - * 2) Alarm Interrupt - generate an interrupt at a specific time of day - * 3) Periodic Interrupt - generate periodic interrupt, with frequencies - * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2) - * (1) and (2) above are implemented using polling at a frequency of - * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt - * overhead. (DEFAULT_RTC_INT_FREQ) - * For (3), we use interrupts at 64Hz or user specified periodic - * frequency, whichever is higher. - */ -#include <linux/rtc.h> - -#define DEFAULT_RTC_INT_FREQ 64 -#define RTC_NUM_INTS 1 - -static unsigned long UIE_on; -static unsigned long prev_update_sec; - -static unsigned long AIE_on; -static struct rtc_time alarm_time; - -static unsigned long PIE_on; -static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ; -static unsigned long PIE_count; - -static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */ -static unsigned int hpet_t1_cmp; /* cached comparator register */ - -int is_hpet_enabled(void) -{ - return vxtime.hpet_address != 0; -} - -/* - * Timer 1 for RTC, we do not use periodic interrupt feature, - * even if HPET supports periodic interrupts on Timer 1. - * The reason being, to set up a periodic interrupt in HPET, we need to - * stop the main counter. And if we do that everytime someone diables/enables - * RTC, we will have adverse effect on main kernel timer running on Timer 0. - * So, for the time being, simulate the periodic interrupt in software. - * - * hpet_rtc_timer_init() is called for the first time and during subsequent - * interuppts reinit happens through hpet_rtc_timer_reinit(). - */ -int hpet_rtc_timer_init(void) -{ - unsigned int cfg, cnt; - unsigned long flags; - - if (!is_hpet_enabled()) - return 0; - /* - * Set the counter 1 and enable the interrupts. - */ - if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) - hpet_rtc_int_freq = PIE_freq; - else - hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; - - local_irq_save(flags); - - cnt = hpet_readl(HPET_COUNTER); - cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq); - hpet_writel(cnt, HPET_T1_CMP); - hpet_t1_cmp = cnt; - - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_PERIODIC; - cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; - hpet_writel(cfg, HPET_T1_CFG); - - local_irq_restore(flags); - - return 1; -} - -static void hpet_rtc_timer_reinit(void) -{ - unsigned int cfg, cnt, ticks_per_int, lost_ints; - - if (unlikely(!(PIE_on | AIE_on | UIE_on))) { - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_ENABLE; - hpet_writel(cfg, HPET_T1_CFG); - return; - } - - if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) - hpet_rtc_int_freq = PIE_freq; - else - hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; - - /* It is more accurate to use the comparator value than current count.*/ - ticks_per_int = hpet_tick * HZ / hpet_rtc_int_freq; - hpet_t1_cmp += ticks_per_int; - hpet_writel(hpet_t1_cmp, HPET_T1_CMP); - - /* - * If the interrupt handler was delayed too long, the write above tries - * to schedule the next interrupt in the past and the hardware would - * not interrupt until the counter had wrapped around. - * So we have to check that the comparator wasn't set to a past time. - */ - cnt = hpet_readl(HPET_COUNTER); - if (unlikely((int)(cnt - hpet_t1_cmp) > 0)) { - lost_ints = (cnt - hpet_t1_cmp) / ticks_per_int + 1; - /* Make sure that, even with the time needed to execute - * this code, the next scheduled interrupt has been moved - * back to the future: */ - lost_ints++; - - hpet_t1_cmp += lost_ints * ticks_per_int; - hpet_writel(hpet_t1_cmp, HPET_T1_CMP); - - if (PIE_on) - PIE_count += lost_ints; - - printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", - hpet_rtc_int_freq); - } -} - -/* - * The functions below are called from rtc driver. - * Return 0 if HPET is not being used. - * Otherwise do the necessary changes and return 1. - */ -int hpet_mask_rtc_irq_bit(unsigned long bit_mask) -{ - if (!is_hpet_enabled()) - return 0; - - if (bit_mask & RTC_UIE) - UIE_on = 0; - if (bit_mask & RTC_PIE) - PIE_on = 0; - if (bit_mask & RTC_AIE) - AIE_on = 0; - - return 1; -} - -int hpet_set_rtc_irq_bit(unsigned long bit_mask) -{ - int timer_init_reqd = 0; - - if (!is_hpet_enabled()) - return 0; - - if (!(PIE_on | AIE_on | UIE_on)) - timer_init_reqd = 1; - - if (bit_mask & RTC_UIE) { - UIE_on = 1; - } - if (bit_mask & RTC_PIE) { - PIE_on = 1; - PIE_count = 0; - } - if (bit_mask & RTC_AIE) { - AIE_on = 1; - } - - if (timer_init_reqd) - hpet_rtc_timer_init(); - - return 1; -} - -int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec) -{ - if (!is_hpet_enabled()) - return 0; - - alarm_time.tm_hour = hrs; - alarm_time.tm_min = min; - alarm_time.tm_sec = sec; - - return 1; -} - -int hpet_set_periodic_freq(unsigned long freq) -{ - if (!is_hpet_enabled()) - return 0; - - PIE_freq = freq; - PIE_count = 0; - - return 1; -} - -int hpet_rtc_dropped_irq(void) -{ - if (!is_hpet_enabled()) - return 0; - - return 1; -} - -irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - struct rtc_time curr_time; - unsigned long rtc_int_flag = 0; - int call_rtc_interrupt = 0; - - hpet_rtc_timer_reinit(); - - if (UIE_on | AIE_on) { - rtc_get_rtc_time(&curr_time); - } - if (UIE_on) { - if (curr_time.tm_sec != prev_update_sec) { - /* Set update int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag = RTC_UF; - prev_update_sec = curr_time.tm_sec; - } - } - if (PIE_on) { - PIE_count++; - if (PIE_count >= hpet_rtc_int_freq/PIE_freq) { - /* Set periodic int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag |= RTC_PF; - PIE_count = 0; - } - } - if (AIE_on) { - if ((curr_time.tm_sec == alarm_time.tm_sec) && - (curr_time.tm_min == alarm_time.tm_min) && - (curr_time.tm_hour == alarm_time.tm_hour)) { - /* Set alarm int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag |= RTC_AF; - } - } - if (call_rtc_interrupt) { - rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8)); - rtc_interrupt(rtc_int_flag, dev_id); - } - return IRQ_HANDLED; -} -#endif - -static int __init nohpet_setup(char *s) -{ - nohpet = 1; - return 1; -} - -__setup("nohpet", nohpet_setup); - -int __init notsc_setup(char *s) -{ - notsc = 1; - return 1; -} - -__setup("notsc", notsc_setup); diff --git a/arch/x86_64/kernel/tsc.c b/arch/x86_64/kernel/tsc.c new file mode 100644 index 00000000000..89583186501 --- /dev/null +++ b/arch/x86_64/kernel/tsc.c @@ -0,0 +1,226 @@ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/clocksource.h> +#include <linux/time.h> +#include <linux/acpi.h> +#include <linux/cpufreq.h> + +#include <asm/timex.h> + +static int notsc __initdata = 0; + +unsigned int cpu_khz; /* TSC clocks / usec, not used here */ +EXPORT_SYMBOL(cpu_khz); + +static unsigned int cyc2ns_scale __read_mostly; + +void set_cyc2ns_scale(unsigned long khz) +{ + cyc2ns_scale = (NSEC_PER_MSEC << NS_SCALE) / khz; +} + +static unsigned long long cycles_2_ns(unsigned long long cyc) +{ + return (cyc * cyc2ns_scale) >> NS_SCALE; +} + +unsigned long long sched_clock(void) +{ + unsigned long a = 0; + + /* Could do CPU core sync here. Opteron can execute rdtsc speculatively, + * which means it is not completely exact and may not be monotonous + * between CPUs. But the errors should be too small to matter for + * scheduling purposes. + */ + + rdtscll(a); + return cycles_2_ns(a); +} + +static int tsc_unstable; + +static inline int check_tsc_unstable(void) +{ + return tsc_unstable; +} +#ifdef CONFIG_CPU_FREQ + +/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency + * changes. + * + * RED-PEN: On SMP we assume all CPUs run with the same frequency. It's + * not that important because current Opteron setups do not support + * scaling on SMP anyroads. + * + * Should fix up last_tsc too. Currently gettimeofday in the + * first tick after the change will be slightly wrong. + */ + +#include <linux/workqueue.h> + +static unsigned int cpufreq_delayed_issched = 0; +static unsigned int cpufreq_init = 0; +static struct work_struct cpufreq_delayed_get_work; + +static void handle_cpufreq_delayed_get(struct work_struct *v) +{ + unsigned int cpu; + for_each_online_cpu(cpu) { + cpufreq_get(cpu); + } + cpufreq_delayed_issched = 0; +} + +static unsigned int ref_freq = 0; +static unsigned long loops_per_jiffy_ref = 0; + +static unsigned long cpu_khz_ref = 0; + +static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, + void *data) +{ + struct cpufreq_freqs *freq = data; + unsigned long *lpj, dummy; + + if (cpu_has(&cpu_data[freq->cpu], X86_FEATURE_CONSTANT_TSC)) + return 0; + + lpj = &dummy; + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) +#ifdef CONFIG_SMP + lpj = &cpu_data[freq->cpu].loops_per_jiffy; +#else + lpj = &boot_cpu_data.loops_per_jiffy; +#endif + + if (!ref_freq) { + ref_freq = freq->old; + loops_per_jiffy_ref = *lpj; + cpu_khz_ref = cpu_khz; + } + if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || + (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || + (val == CPUFREQ_RESUMECHANGE)) { + *lpj = + cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new); + + cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new); + if (!(freq->flags & CPUFREQ_CONST_LOOPS)) + mark_tsc_unstable(); + } + + set_cyc2ns_scale(cpu_khz_ref); + + return 0; +} + +static struct notifier_block time_cpufreq_notifier_block = { + .notifier_call = time_cpufreq_notifier +}; + +static int __init cpufreq_tsc(void) +{ + INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get); + if (!cpufreq_register_notifier(&time_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER)) + cpufreq_init = 1; + return 0; +} + +core_initcall(cpufreq_tsc); + +#endif + +static int tsc_unstable = 0; + +/* + * Make an educated guess if the TSC is trustworthy and synchronized + * over all CPUs. + */ +__cpuinit int unsynchronized_tsc(void) +{ + if (tsc_unstable) + return 1; + +#ifdef CONFIG_SMP + if (apic_is_clustered_box()) + return 1; +#endif + /* Most intel systems have synchronized TSCs except for + multi node systems */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) { +#ifdef CONFIG_ACPI + /* But TSC doesn't tick in C3 so don't use it there */ + if (acpi_gbl_FADT.header.length > 0 && acpi_gbl_FADT.C3latency < 1000) + return 1; +#endif + return 0; + } + + /* Assume multi socket systems are not synchronized */ + return num_present_cpus() > 1; +} + +int __init notsc_setup(char *s) +{ + notsc = 1; + return 1; +} + +__setup("notsc", notsc_setup); + + +/* clock source code: */ +static cycle_t read_tsc(void) +{ + cycle_t ret = (cycle_t)get_cycles_sync(); + return ret; +} + +static cycle_t __vsyscall_fn vread_tsc(void) +{ + cycle_t ret = (cycle_t)get_cycles_sync(); + return ret; +} + +static struct clocksource clocksource_tsc = { + .name = "tsc", + .rating = 300, + .read = read_tsc, + .mask = CLOCKSOURCE_MASK(64), + .shift = 22, + .flags = CLOCK_SOURCE_IS_CONTINUOUS | + CLOCK_SOURCE_MUST_VERIFY, + .vread = vread_tsc, +}; + +void mark_tsc_unstable(void) +{ + if (!tsc_unstable) { + tsc_unstable = 1; + /* Change only the rating, when not registered */ + if (clocksource_tsc.mult) + clocksource_change_rating(&clocksource_tsc, 0); + else + clocksource_tsc.rating = 0; + } +} +EXPORT_SYMBOL_GPL(mark_tsc_unstable); + +static int __init init_tsc_clocksource(void) +{ + if (!notsc) { + clocksource_tsc.mult = clocksource_khz2mult(cpu_khz, + clocksource_tsc.shift); + if (check_tsc_unstable()) + clocksource_tsc.rating = 0; + + return clocksource_register(&clocksource_tsc); + } + return 0; +} + +module_init(init_tsc_clocksource); diff --git a/arch/x86_64/kernel/tsc_sync.c b/arch/x86_64/kernel/tsc_sync.c new file mode 100644 index 00000000000..014f0db45df --- /dev/null +++ b/arch/x86_64/kernel/tsc_sync.c @@ -0,0 +1,187 @@ +/* + * arch/x86_64/kernel/tsc_sync.c: check TSC synchronization. + * + * Copyright (C) 2006, Red Hat, Inc., Ingo Molnar + * + * We check whether all boot CPUs have their TSC's synchronized, + * print a warning if not and turn off the TSC clock-source. + * + * The warp-check is point-to-point between two CPUs, the CPU + * initiating the bootup is the 'source CPU', the freshly booting + * CPU is the 'target CPU'. + * + * Only two CPUs may participate - they can enter in any order. + * ( The serial nature of the boot logic and the CPU hotplug lock + * protects against more than 2 CPUs entering this code. ) + */ +#include <linux/spinlock.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/nmi.h> +#include <asm/tsc.h> + +/* + * Entry/exit counters that make sure that both CPUs + * run the measurement code at once: + */ +static __cpuinitdata atomic_t start_count; +static __cpuinitdata atomic_t stop_count; + +/* + * We use a raw spinlock in this exceptional case, because + * we want to have the fastest, inlined, non-debug version + * of a critical section, to be able to prove TSC time-warps: + */ +static __cpuinitdata raw_spinlock_t sync_lock = __RAW_SPIN_LOCK_UNLOCKED; +static __cpuinitdata cycles_t last_tsc; +static __cpuinitdata cycles_t max_warp; +static __cpuinitdata int nr_warps; + +/* + * TSC-warp measurement loop running on both CPUs: + */ +static __cpuinit void check_tsc_warp(void) +{ + cycles_t start, now, prev, end; + int i; + + start = get_cycles_sync(); + /* + * The measurement runs for 20 msecs: + */ + end = start + cpu_khz * 20ULL; + now = start; + + for (i = 0; ; i++) { + /* + * We take the global lock, measure TSC, save the + * previous TSC that was measured (possibly on + * another CPU) and update the previous TSC timestamp. + */ + __raw_spin_lock(&sync_lock); + prev = last_tsc; + now = get_cycles_sync(); + last_tsc = now; + __raw_spin_unlock(&sync_lock); + + /* + * Be nice every now and then (and also check whether + * measurement is done [we also insert a 100 million + * loops safety exit, so we dont lock up in case the + * TSC readout is totally broken]): + */ + if (unlikely(!(i & 7))) { + if (now > end || i > 100000000) + break; + cpu_relax(); + touch_nmi_watchdog(); + } + /* + * Outside the critical section we can now see whether + * we saw a time-warp of the TSC going backwards: + */ + if (unlikely(prev > now)) { + __raw_spin_lock(&sync_lock); + max_warp = max(max_warp, prev - now); + nr_warps++; + __raw_spin_unlock(&sync_lock); + } + + } +} + +/* + * Source CPU calls into this - it waits for the freshly booted + * target CPU to arrive and then starts the measurement: + */ +void __cpuinit check_tsc_sync_source(int cpu) +{ + int cpus = 2; + + /* + * No need to check if we already know that the TSC is not + * synchronized: + */ + if (unsynchronized_tsc()) + return; + + printk(KERN_INFO "checking TSC synchronization [CPU#%d -> CPU#%d]:", + smp_processor_id(), cpu); + + /* + * Reset it - in case this is a second bootup: + */ + atomic_set(&stop_count, 0); + + /* + * Wait for the target to arrive: + */ + while (atomic_read(&start_count) != cpus-1) + cpu_relax(); + /* + * Trigger the target to continue into the measurement too: + */ + atomic_inc(&start_count); + + check_tsc_warp(); + + while (atomic_read(&stop_count) != cpus-1) + cpu_relax(); + + /* + * Reset it - just in case we boot another CPU later: + */ + atomic_set(&start_count, 0); + + if (nr_warps) { + printk("\n"); + printk(KERN_WARNING "Measured %Ld cycles TSC warp between CPUs," + " turning off TSC clock.\n", max_warp); + mark_tsc_unstable(); + nr_warps = 0; + max_warp = 0; + last_tsc = 0; + } else { + printk(" passed.\n"); + } + + /* + * Let the target continue with the bootup: + */ + atomic_inc(&stop_count); +} + +/* + * Freshly booted CPUs call into this: + */ +void __cpuinit check_tsc_sync_target(void) +{ + int cpus = 2; + + if (unsynchronized_tsc()) + return; + + /* + * Register this CPU's participation and wait for the + * source CPU to start the measurement: + */ + atomic_inc(&start_count); + while (atomic_read(&start_count) != cpus) + cpu_relax(); + + check_tsc_warp(); + + /* + * Ok, we are done: + */ + atomic_inc(&stop_count); + + /* + * Wait for the source CPU to print stuff: + */ + while (atomic_read(&stop_count) != cpus) + cpu_relax(); +} +#undef NR_LOOPS + diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S index c360c422524..b73212c0a55 100644 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ b/arch/x86_64/kernel/vmlinux.lds.S @@ -88,31 +88,25 @@ SECTIONS __vsyscall_0 = VSYSCALL_VIRT_ADDR; . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); - .xtime_lock : AT(VLOAD(.xtime_lock)) { *(.xtime_lock) } - xtime_lock = VVIRT(.xtime_lock); - - .vxtime : AT(VLOAD(.vxtime)) { *(.vxtime) } - vxtime = VVIRT(.vxtime); + .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) { *(.vsyscall_fn) } + . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); + .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) + { *(.vsyscall_gtod_data) } + vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data); .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) } vgetcpu_mode = VVIRT(.vgetcpu_mode); - .sys_tz : AT(VLOAD(.sys_tz)) { *(.sys_tz) } - sys_tz = VVIRT(.sys_tz); - - .sysctl_vsyscall : AT(VLOAD(.sysctl_vsyscall)) { *(.sysctl_vsyscall) } - sysctl_vsyscall = VVIRT(.sysctl_vsyscall); - - .xtime : AT(VLOAD(.xtime)) { *(.xtime) } - xtime = VVIRT(.xtime); - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); .jiffies : AT(VLOAD(.jiffies)) { *(.jiffies) } jiffies = VVIRT(.jiffies); - .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) { *(.vsyscall_1) } - .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) { *(.vsyscall_2) } - .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) { *(.vsyscall_3) } + .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) + { *(.vsyscall_1) } + .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) + { *(.vsyscall_2) } + .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) + { *(.vsyscall_3) } . = VSYSCALL_VIRT_ADDR + 4096; diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c index 2433d6fc68b..180ff919eaf 100644 --- a/arch/x86_64/kernel/vsyscall.c +++ b/arch/x86_64/kernel/vsyscall.c @@ -26,6 +26,7 @@ #include <linux/seqlock.h> #include <linux/jiffies.h> #include <linux/sysctl.h> +#include <linux/clocksource.h> #include <linux/getcpu.h> #include <linux/cpu.h> #include <linux/smp.h> @@ -34,6 +35,7 @@ #include <asm/vsyscall.h> #include <asm/pgtable.h> #include <asm/page.h> +#include <asm/unistd.h> #include <asm/fixmap.h> #include <asm/errno.h> #include <asm/io.h> @@ -44,56 +46,41 @@ #define __vsyscall(nr) __attribute__ ((unused,__section__(".vsyscall_" #nr))) #define __syscall_clobber "r11","rcx","memory" -int __sysctl_vsyscall __section_sysctl_vsyscall = 1; -seqlock_t __xtime_lock __section_xtime_lock = SEQLOCK_UNLOCKED; +struct vsyscall_gtod_data_t { + seqlock_t lock; + int sysctl_enabled; + struct timeval wall_time_tv; + struct timezone sys_tz; + cycle_t offset_base; + struct clocksource clock; +}; int __vgetcpu_mode __section_vgetcpu_mode; -#include <asm/unistd.h> - -static __always_inline void timeval_normalize(struct timeval * tv) +struct vsyscall_gtod_data_t __vsyscall_gtod_data __section_vsyscall_gtod_data = { - time_t __sec; - - __sec = tv->tv_usec / 1000000; - if (__sec) { - tv->tv_usec %= 1000000; - tv->tv_sec += __sec; - } -} + .lock = SEQLOCK_UNLOCKED, + .sysctl_enabled = 1, +}; -static __always_inline void do_vgettimeofday(struct timeval * tv) +void update_vsyscall(struct timespec *wall_time, struct clocksource *clock) { - long sequence, t; - unsigned long sec, usec; - - do { - sequence = read_seqbegin(&__xtime_lock); - - sec = __xtime.tv_sec; - usec = __xtime.tv_nsec / 1000; - - if (__vxtime.mode != VXTIME_HPET) { - t = get_cycles_sync(); - if (t < __vxtime.last_tsc) - t = __vxtime.last_tsc; - usec += ((t - __vxtime.last_tsc) * - __vxtime.tsc_quot) >> 32; - /* See comment in x86_64 do_gettimeofday. */ - } else { - usec += ((readl((void __iomem *) - fix_to_virt(VSYSCALL_HPET) + 0xf0) - - __vxtime.last) * __vxtime.quot) >> 32; - } - } while (read_seqretry(&__xtime_lock, sequence)); - - tv->tv_sec = sec + usec / 1000000; - tv->tv_usec = usec % 1000000; + unsigned long flags; + + write_seqlock_irqsave(&vsyscall_gtod_data.lock, flags); + /* copy vsyscall data */ + vsyscall_gtod_data.clock = *clock; + vsyscall_gtod_data.wall_time_tv.tv_sec = wall_time->tv_sec; + vsyscall_gtod_data.wall_time_tv.tv_usec = wall_time->tv_nsec/1000; + vsyscall_gtod_data.sys_tz = sys_tz; + write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags); } -/* RED-PEN may want to readd seq locking, but then the variable should be write-once. */ +/* RED-PEN may want to readd seq locking, but then the variable should be + * write-once. + */ static __always_inline void do_get_tz(struct timezone * tz) { - *tz = __sys_tz; + *tz = __vsyscall_gtod_data.sys_tz; } static __always_inline int gettimeofday(struct timeval *tv, struct timezone *tz) @@ -101,7 +88,8 @@ static __always_inline int gettimeofday(struct timeval *tv, struct timezone *tz) int ret; asm volatile("vsysc2: syscall" : "=a" (ret) - : "0" (__NR_gettimeofday),"D" (tv),"S" (tz) : __syscall_clobber ); + : "0" (__NR_gettimeofday),"D" (tv),"S" (tz) + : __syscall_clobber ); return ret; } @@ -114,10 +102,44 @@ static __always_inline long time_syscall(long *t) return secs; } +static __always_inline void do_vgettimeofday(struct timeval * tv) +{ + cycle_t now, base, mask, cycle_delta; + unsigned long seq, mult, shift, nsec_delta; + cycle_t (*vread)(void); + do { + seq = read_seqbegin(&__vsyscall_gtod_data.lock); + + vread = __vsyscall_gtod_data.clock.vread; + if (unlikely(!__vsyscall_gtod_data.sysctl_enabled || !vread)) { + gettimeofday(tv,0); + return; + } + now = vread(); + base = __vsyscall_gtod_data.clock.cycle_last; + mask = __vsyscall_gtod_data.clock.mask; + mult = __vsyscall_gtod_data.clock.mult; + shift = __vsyscall_gtod_data.clock.shift; + + *tv = __vsyscall_gtod_data.wall_time_tv; + + } while (read_seqretry(&__vsyscall_gtod_data.lock, seq)); + + /* calculate interval: */ + cycle_delta = (now - base) & mask; + /* convert to nsecs: */ + nsec_delta = (cycle_delta * mult) >> shift; + + /* convert to usecs and add to timespec: */ + tv->tv_usec += nsec_delta / NSEC_PER_USEC; + while (tv->tv_usec > USEC_PER_SEC) { + tv->tv_sec += 1; + tv->tv_usec -= USEC_PER_SEC; + } +} + int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz) { - if (!__sysctl_vsyscall) - return gettimeofday(tv,tz); if (tv) do_vgettimeofday(tv); if (tz) @@ -129,11 +151,11 @@ int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz) * unlikely */ time_t __vsyscall(1) vtime(time_t *t) { - if (!__sysctl_vsyscall) + if (unlikely(!__vsyscall_gtod_data.sysctl_enabled)) return time_syscall(t); else if (t) - *t = __xtime.tv_sec; - return __xtime.tv_sec; + *t = __vsyscall_gtod_data.wall_time_tv.tv_sec; + return __vsyscall_gtod_data.wall_time_tv.tv_sec; } /* Fast way to get current CPU and node. @@ -210,7 +232,7 @@ static int vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp, ret = -ENOMEM; goto out; } - if (!sysctl_vsyscall) { + if (!vsyscall_gtod_data.sysctl_enabled) { writew(SYSCALL, map1); writew(SYSCALL, map2); } else { @@ -232,16 +254,17 @@ static int vsyscall_sysctl_nostrat(ctl_table *t, int __user *name, int nlen, static ctl_table kernel_table2[] = { { .ctl_name = 99, .procname = "vsyscall64", - .data = &sysctl_vsyscall, .maxlen = sizeof(int), .mode = 0644, + .data = &vsyscall_gtod_data.sysctl_enabled, .maxlen = sizeof(int), + .mode = 0644, .strategy = vsyscall_sysctl_nostrat, .proc_handler = vsyscall_sysctl_change }, - { 0, } + {} }; static ctl_table kernel_root_table2[] = { { .ctl_name = CTL_KERN, .procname = "kernel", .mode = 0555, .child = kernel_table2 }, - { 0 }, + {} }; #endif @@ -301,7 +324,7 @@ static int __init vsyscall_init(void) BUG_ON((unsigned long) &vgetcpu != VSYSCALL_ADDR(__NR_vgetcpu)); map_vsyscall(); #ifdef CONFIG_SYSCTL - register_sysctl_table(kernel_root_table2, 0); + register_sysctl_table(kernel_root_table2); #endif on_each_cpu(cpu_vsyscall_init, NULL, 0, 1); hotcpu_notifier(cpu_vsyscall_notifier, 0); diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c index 6d77e4797a4..0dffae69f4a 100644 --- a/arch/x86_64/kernel/x8664_ksyms.c +++ b/arch/x86_64/kernel/x8664_ksyms.c @@ -26,6 +26,7 @@ EXPORT_SYMBOL(__put_user_4); EXPORT_SYMBOL(__put_user_8); EXPORT_SYMBOL(copy_user_generic); +EXPORT_SYMBOL(__copy_user_nocache); EXPORT_SYMBOL(copy_from_user); EXPORT_SYMBOL(copy_to_user); EXPORT_SYMBOL(__copy_from_user_inatomic); @@ -34,8 +35,8 @@ EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(clear_page); #ifdef CONFIG_SMP -extern void FASTCALL( __write_lock_failed(rwlock_t *rw)); -extern void FASTCALL( __read_lock_failed(rwlock_t *rw)); +extern void __write_lock_failed(rwlock_t *rw); +extern void __read_lock_failed(rwlock_t *rw); EXPORT_SYMBOL(__write_lock_failed); EXPORT_SYMBOL(__read_lock_failed); #endif diff --git a/arch/x86_64/lib/Makefile b/arch/x86_64/lib/Makefile index b78d4170fce..8d5f835af48 100644 --- a/arch/x86_64/lib/Makefile +++ b/arch/x86_64/lib/Makefile @@ -9,4 +9,4 @@ obj-y := io.o iomap_copy.o lib-y := csum-partial.o csum-copy.o csum-wrappers.o delay.o \ usercopy.o getuser.o putuser.o \ thunk.o clear_page.o copy_page.o bitstr.o bitops.o -lib-y += memcpy.o memmove.o memset.o copy_user.o rwlock.o +lib-y += memcpy.o memmove.o memset.o copy_user.o rwlock.o copy_user_nocache.o diff --git a/arch/x86_64/lib/copy_user_nocache.S b/arch/x86_64/lib/copy_user_nocache.S new file mode 100644 index 00000000000..4620efb12f1 --- /dev/null +++ b/arch/x86_64/lib/copy_user_nocache.S @@ -0,0 +1,217 @@ +/* Copyright 2002 Andi Kleen, SuSE Labs. + * Subject to the GNU Public License v2. + * + * Functions to copy from and to user space. + */ + +#include <linux/linkage.h> +#include <asm/dwarf2.h> + +#define FIX_ALIGNMENT 1 + +#include <asm/current.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/cpufeature.h> + +/* + * copy_user_nocache - Uncached memory copy with exception handling + * This will force destination/source out of cache for more performance. + * + * Input: + * rdi destination + * rsi source + * rdx count + * rcx zero flag when 1 zero on exception + * + * Output: + * eax uncopied bytes or 0 if successful. + */ +ENTRY(__copy_user_nocache) + CFI_STARTPROC + pushq %rbx + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rbx, 0 + pushq %rcx /* save zero flag */ + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rcx, 0 + + xorl %eax,%eax /* zero for the exception handler */ + +#ifdef FIX_ALIGNMENT + /* check for bad alignment of destination */ + movl %edi,%ecx + andl $7,%ecx + jnz .Lbad_alignment +.Lafter_bad_alignment: +#endif + + movq %rdx,%rcx + + movl $64,%ebx + shrq $6,%rdx + decq %rdx + js .Lhandle_tail + + .p2align 4 +.Lloop: +.Ls1: movq (%rsi),%r11 +.Ls2: movq 1*8(%rsi),%r8 +.Ls3: movq 2*8(%rsi),%r9 +.Ls4: movq 3*8(%rsi),%r10 +.Ld1: movnti %r11,(%rdi) +.Ld2: movnti %r8,1*8(%rdi) +.Ld3: movnti %r9,2*8(%rdi) +.Ld4: movnti %r10,3*8(%rdi) + +.Ls5: movq 4*8(%rsi),%r11 +.Ls6: movq 5*8(%rsi),%r8 +.Ls7: movq 6*8(%rsi),%r9 +.Ls8: movq 7*8(%rsi),%r10 +.Ld5: movnti %r11,4*8(%rdi) +.Ld6: movnti %r8,5*8(%rdi) +.Ld7: movnti %r9,6*8(%rdi) +.Ld8: movnti %r10,7*8(%rdi) + + dec %rdx + + leaq 64(%rsi),%rsi + leaq 64(%rdi),%rdi + + jns .Lloop + + .p2align 4 +.Lhandle_tail: + movl %ecx,%edx + andl $63,%ecx + shrl $3,%ecx + jz .Lhandle_7 + movl $8,%ebx + .p2align 4 +.Lloop_8: +.Ls9: movq (%rsi),%r8 +.Ld9: movnti %r8,(%rdi) + decl %ecx + leaq 8(%rdi),%rdi + leaq 8(%rsi),%rsi + jnz .Lloop_8 + +.Lhandle_7: + movl %edx,%ecx + andl $7,%ecx + jz .Lende + .p2align 4 +.Lloop_1: +.Ls10: movb (%rsi),%bl +.Ld10: movb %bl,(%rdi) + incq %rdi + incq %rsi + decl %ecx + jnz .Lloop_1 + + CFI_REMEMBER_STATE +.Lende: + popq %rcx + CFI_ADJUST_CFA_OFFSET -8 + CFI_RESTORE %rcx + popq %rbx + CFI_ADJUST_CFA_OFFSET -8 + CFI_RESTORE rbx + ret + CFI_RESTORE_STATE + +#ifdef FIX_ALIGNMENT + /* align destination */ + .p2align 4 +.Lbad_alignment: + movl $8,%r9d + subl %ecx,%r9d + movl %r9d,%ecx + cmpq %r9,%rdx + jz .Lhandle_7 + js .Lhandle_7 +.Lalign_1: +.Ls11: movb (%rsi),%bl +.Ld11: movb %bl,(%rdi) + incq %rsi + incq %rdi + decl %ecx + jnz .Lalign_1 + subq %r9,%rdx + jmp .Lafter_bad_alignment +#endif + + /* table sorted by exception address */ + .section __ex_table,"a" + .align 8 + .quad .Ls1,.Ls1e + .quad .Ls2,.Ls2e + .quad .Ls3,.Ls3e + .quad .Ls4,.Ls4e + .quad .Ld1,.Ls1e + .quad .Ld2,.Ls2e + .quad .Ld3,.Ls3e + .quad .Ld4,.Ls4e + .quad .Ls5,.Ls5e + .quad .Ls6,.Ls6e + .quad .Ls7,.Ls7e + .quad .Ls8,.Ls8e + .quad .Ld5,.Ls5e + .quad .Ld6,.Ls6e + .quad .Ld7,.Ls7e + .quad .Ld8,.Ls8e + .quad .Ls9,.Le_quad + .quad .Ld9,.Le_quad + .quad .Ls10,.Le_byte + .quad .Ld10,.Le_byte +#ifdef FIX_ALIGNMENT + .quad .Ls11,.Lzero_rest + .quad .Ld11,.Lzero_rest +#endif + .quad .Le5,.Le_zero + .previous + + /* compute 64-offset for main loop. 8 bytes accuracy with error on the + pessimistic side. this is gross. it would be better to fix the + interface. */ + /* eax: zero, ebx: 64 */ +.Ls1e: addl $8,%eax +.Ls2e: addl $8,%eax +.Ls3e: addl $8,%eax +.Ls4e: addl $8,%eax +.Ls5e: addl $8,%eax +.Ls6e: addl $8,%eax +.Ls7e: addl $8,%eax +.Ls8e: addl $8,%eax + addq %rbx,%rdi /* +64 */ + subq %rax,%rdi /* correct destination with computed offset */ + + shlq $6,%rdx /* loop counter * 64 (stride length) */ + addq %rax,%rdx /* add offset to loopcnt */ + andl $63,%ecx /* remaining bytes */ + addq %rcx,%rdx /* add them */ + jmp .Lzero_rest + + /* exception on quad word loop in tail handling */ + /* ecx: loopcnt/8, %edx: length, rdi: correct */ +.Le_quad: + shll $3,%ecx + andl $7,%edx + addl %ecx,%edx + /* edx: bytes to zero, rdi: dest, eax:zero */ +.Lzero_rest: + cmpl $0,(%rsp) /* zero flag set? */ + jz .Le_zero + movq %rdx,%rcx +.Le_byte: + xorl %eax,%eax +.Le5: rep + stosb + /* when there is another exception while zeroing the rest just return */ +.Le_zero: + movq %rdx,%rax + jmp .Lende + CFI_ENDPROC +ENDPROC(__copy_user_nocache) + + diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index 49e8cf2e06f..6ada7231f3a 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -56,17 +56,17 @@ int unregister_page_fault_notifier(struct notifier_block *nb) } EXPORT_SYMBOL_GPL(unregister_page_fault_notifier); -static inline int notify_page_fault(enum die_val val, const char *str, - struct pt_regs *regs, long err, int trap, int sig) +static inline int notify_page_fault(struct pt_regs *regs, long err) { struct die_args args = { .regs = regs, - .str = str, + .str = "page fault", .err = err, - .trapnr = trap, - .signr = sig + .trapnr = 14, + .signr = SIGSEGV }; - return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); + return atomic_notifier_call_chain(¬ify_page_fault_chain, + DIE_PAGE_FAULT, &args); } /* Sometimes the CPU reports invalid exceptions on prefetch. @@ -355,8 +355,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, if (vmalloc_fault(address) >= 0) return; } - if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, - SIGSEGV) == NOTIFY_STOP) + if (notify_page_fault(regs, error_code) == NOTIFY_STOP) return; /* * Don't take the mm semaphore here. If we fixup a prefetch @@ -365,8 +364,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, goto bad_area_nosemaphore; } - if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14, - SIGSEGV) == NOTIFY_STOP) + if (notify_page_fault(regs, error_code) == NOTIFY_STOP) return; if (likely(regs->eflags & X86_EFLAGS_IF)) diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index 2968b90ef8a..ec31534eb10 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -711,20 +711,30 @@ int kern_addr_valid(unsigned long addr) extern int exception_trace, page_fault_trace; static ctl_table debug_table2[] = { - { 99, "exception-trace", &exception_trace, sizeof(int), 0644, NULL, - proc_dointvec }, - { 0, } + { + .ctl_name = 99, + .procname = "exception-trace", + .data = &exception_trace, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec + }, + {} }; static ctl_table debug_root_table2[] = { - { .ctl_name = CTL_DEBUG, .procname = "debug", .mode = 0555, - .child = debug_table2 }, - { 0 }, + { + .ctl_name = CTL_DEBUG, + .procname = "debug", + .mode = 0555, + .child = debug_table2 + }, + {} }; static __init int x8664_sysctl_init(void) { - register_sysctl_table(debug_root_table2, 1); + register_sysctl_table(debug_root_table2); return 0; } __initcall(x8664_sysctl_init); diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 2ee2e003606..41b8fb06992 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -36,6 +36,8 @@ unsigned char apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = { cpumask_t node_to_cpumask[MAX_NUMNODES] __read_mostly; int numa_off __initdata; +unsigned long __initdata nodemap_addr; +unsigned long __initdata nodemap_size; /* @@ -52,34 +54,88 @@ populate_memnodemap(const struct bootnode *nodes, int numnodes, int shift) int res = -1; unsigned long addr, end; - if (shift >= 64) - return -1; - memset(memnodemap, 0xff, sizeof(memnodemap)); + memset(memnodemap, 0xff, memnodemapsize); for (i = 0; i < numnodes; i++) { addr = nodes[i].start; end = nodes[i].end; if (addr >= end) continue; - if ((end >> shift) >= NODEMAPSIZE) + if ((end >> shift) >= memnodemapsize) return 0; do { if (memnodemap[addr >> shift] != 0xff) return -1; memnodemap[addr >> shift] = i; - addr += (1UL << shift); + addr += (1UL << shift); } while (addr < end); res = 1; } return res; } -int __init compute_hash_shift(struct bootnode *nodes, int numnodes) +static int __init allocate_cachealigned_memnodemap(void) { - int shift = 20; + unsigned long pad, pad_addr; + + memnodemap = memnode.embedded_map; + if (memnodemapsize <= 48) + return 0; + + pad = L1_CACHE_BYTES - 1; + pad_addr = 0x8000; + nodemap_size = pad + memnodemapsize; + nodemap_addr = find_e820_area(pad_addr, end_pfn<<PAGE_SHIFT, + nodemap_size); + if (nodemap_addr == -1UL) { + printk(KERN_ERR + "NUMA: Unable to allocate Memory to Node hash map\n"); + nodemap_addr = nodemap_size = 0; + return -1; + } + pad_addr = (nodemap_addr + pad) & ~pad; + memnodemap = phys_to_virt(pad_addr); + + printk(KERN_DEBUG "NUMA: Allocated memnodemap from %lx - %lx\n", + nodemap_addr, nodemap_addr + nodemap_size); + return 0; +} - while (populate_memnodemap(nodes, numnodes, shift + 1) >= 0) - shift++; +/* + * The LSB of all start and end addresses in the node map is the value of the + * maximum possible shift. + */ +static int __init +extract_lsb_from_nodes (const struct bootnode *nodes, int numnodes) +{ + int i, nodes_used = 0; + unsigned long start, end; + unsigned long bitfield = 0, memtop = 0; + + for (i = 0; i < numnodes; i++) { + start = nodes[i].start; + end = nodes[i].end; + if (start >= end) + continue; + bitfield |= start; + nodes_used++; + if (end > memtop) + memtop = end; + } + if (nodes_used <= 1) + i = 63; + else + i = find_first_bit(&bitfield, sizeof(unsigned long)*8); + memnodemapsize = (memtop >> i)+1; + return i; +} + +int __init compute_hash_shift(struct bootnode *nodes, int numnodes) +{ + int shift; + shift = extract_lsb_from_nodes(nodes, numnodes); + if (allocate_cachealigned_memnodemap()) + return -1; printk(KERN_DEBUG "NUMA: Using %d for the hash shift.\n", shift); @@ -216,31 +272,113 @@ void __init numa_init_array(void) } #ifdef CONFIG_NUMA_EMU +/* Numa emulation */ int numa_fake __initdata = 0; -/* Numa emulation */ +/* + * This function is used to find out if the start and end correspond to + * different zones. + */ +int zone_cross_over(unsigned long start, unsigned long end) +{ + if ((start < (MAX_DMA32_PFN << PAGE_SHIFT)) && + (end >= (MAX_DMA32_PFN << PAGE_SHIFT))) + return 1; + return 0; +} + static int __init numa_emulation(unsigned long start_pfn, unsigned long end_pfn) { - int i; + int i, big; struct bootnode nodes[MAX_NUMNODES]; - unsigned long sz = ((end_pfn - start_pfn)<<PAGE_SHIFT) / numa_fake; + unsigned long sz, old_sz; + unsigned long hole_size; + unsigned long start, end; + unsigned long max_addr = (end_pfn << PAGE_SHIFT); + + start = (start_pfn << PAGE_SHIFT); + hole_size = e820_hole_size(start, max_addr); + sz = (max_addr - start - hole_size) / numa_fake; /* Kludge needed for the hash function */ - if (hweight64(sz) > 1) { - unsigned long x = 1; - while ((x << 1) < sz) - x <<= 1; - if (x < sz/2) - printk(KERN_ERR "Numa emulation unbalanced. Complain to maintainer\n"); - sz = x; - } + old_sz = sz; + /* + * Round down to the nearest FAKE_NODE_MIN_SIZE. + */ + sz &= FAKE_NODE_MIN_HASH_MASK; + + /* + * We ensure that each node is at least 64MB big. Smaller than this + * size can cause VM hiccups. + */ + if (sz == 0) { + printk(KERN_INFO "Not enough memory for %d nodes. Reducing " + "the number of nodes\n", numa_fake); + numa_fake = (max_addr - start - hole_size) / FAKE_NODE_MIN_SIZE; + printk(KERN_INFO "Number of fake nodes will be = %d\n", + numa_fake); + sz = FAKE_NODE_MIN_SIZE; + } + /* + * Find out how many nodes can get an extra NODE_MIN_SIZE granule. + * This logic ensures the extra memory gets distributed among as many + * nodes as possible (as compared to one single node getting all that + * extra memory. + */ + big = ((old_sz - sz) * numa_fake) / FAKE_NODE_MIN_SIZE; + printk(KERN_INFO "Fake node Size: %luMB hole_size: %luMB big nodes: " + "%d\n", + (sz >> 20), (hole_size >> 20), big); memset(&nodes,0,sizeof(nodes)); + end = start; for (i = 0; i < numa_fake; i++) { - nodes[i].start = (start_pfn<<PAGE_SHIFT) + i*sz; + /* + * In case we are not able to allocate enough memory for all + * the nodes, we reduce the number of fake nodes. + */ + if (end >= max_addr) { + numa_fake = i - 1; + break; + } + start = nodes[i].start = end; + /* + * Final node can have all the remaining memory. + */ if (i == numa_fake-1) - sz = (end_pfn<<PAGE_SHIFT) - nodes[i].start; - nodes[i].end = nodes[i].start + sz; + sz = max_addr - start; + end = nodes[i].start + sz; + /* + * Fir "big" number of nodes get extra granule. + */ + if (i < big) + end += FAKE_NODE_MIN_SIZE; + /* + * Iterate over the range to ensure that this node gets at + * least sz amount of RAM (excluding holes) + */ + while ((end - start - e820_hole_size(start, end)) < sz) { + end += FAKE_NODE_MIN_SIZE; + if (end >= max_addr) + break; + } + /* + * Look at the next node to make sure there is some real memory + * to map. Bad things happen when the only memory present + * in a zone on a fake node is IO hole. + */ + while (e820_hole_size(end, end + FAKE_NODE_MIN_SIZE) > 0) { + if (zone_cross_over(start, end + sz)) { + end = (MAX_DMA32_PFN << PAGE_SHIFT); + break; + } + if (end >= max_addr) + break; + end += FAKE_NODE_MIN_SIZE; + } + if (end > max_addr) + end = max_addr; + nodes[i].end = end; printk(KERN_INFO "Faking node %d at %016Lx-%016Lx (%LuMB)\n", i, nodes[i].start, nodes[i].end, @@ -290,6 +428,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn) end_pfn << PAGE_SHIFT); /* setup dummy node covering all memory */ memnode_shift = 63; + memnodemap = memnode.embedded_map; memnodemap[0] = 0; nodes_clear(node_online_map); node_set_online(0); @@ -321,20 +460,6 @@ unsigned long __init numa_free_all_bootmem(void) return pages; } -#ifdef CONFIG_SPARSEMEM -static void __init arch_sparse_init(void) -{ - int i; - - for_each_online_node(i) - memory_present(i, node_start_pfn(i), node_end_pfn(i)); - - sparse_init(); -} -#else -#define arch_sparse_init() do {} while (0) -#endif - void __init paging_init(void) { int i; @@ -344,7 +469,8 @@ void __init paging_init(void) max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN; max_zone_pfns[ZONE_NORMAL] = end_pfn; - arch_sparse_init(); + sparse_memory_present_with_active_regions(MAX_NUMNODES); + sparse_init(); for_each_online_node(i) { setup_node_zones(i); diff --git a/arch/x86_64/mm/pageattr.c b/arch/x86_64/mm/pageattr.c index ccb91dd996a..65c5eaa5990 100644 --- a/arch/x86_64/mm/pageattr.c +++ b/arch/x86_64/mm/pageattr.c @@ -107,6 +107,7 @@ static void revert_page(unsigned long address, pgprot_t ref_prot) pud_t *pud; pmd_t *pmd; pte_t large_pte; + unsigned long pfn; pgd = pgd_offset_k(address); BUG_ON(pgd_none(*pgd)); @@ -114,7 +115,8 @@ static void revert_page(unsigned long address, pgprot_t ref_prot) BUG_ON(pud_none(*pud)); pmd = pmd_offset(pud, address); BUG_ON(pmd_val(*pmd) & _PAGE_PSE); - large_pte = mk_pte_phys(__pa(address) & LARGE_PAGE_MASK, ref_prot); + pfn = (__pa(address) & LARGE_PAGE_MASK) >> PAGE_SHIFT; + large_pte = pfn_pte(pfn, ref_prot); large_pte = pte_mkhuge(large_pte); set_pte((pte_t *)pmd, large_pte); } diff --git a/arch/x86_64/pci/Makefile b/arch/x86_64/pci/Makefile index 149aba05a5b..c9eddc8859c 100644 --- a/arch/x86_64/pci/Makefile +++ b/arch/x86_64/pci/Makefile @@ -11,7 +11,7 @@ obj-y += fixup.o init.o obj-$(CONFIG_ACPI) += acpi.o obj-y += legacy.o irq.o common.o early.o # mmconfig has a 64bit special -obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o +obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o obj-$(CONFIG_NUMA) += k8-bus.o @@ -24,3 +24,4 @@ fixup-y += ../../i386/pci/fixup.o i386-y += ../../i386/pci/i386.o init-y += ../../i386/pci/init.o early-y += ../../i386/pci/early.o +mmconfig-shared-y += ../../i386/pci/mmconfig-shared.o diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 98202cb50d8..65d82736987 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -13,16 +13,6 @@ #include "pci.h" -/* aperture is up to 256MB but BIOS may reserve less */ -#define MMCONFIG_APER_MIN (2 * 1024*1024) -#define MMCONFIG_APER_MAX (256 * 1024*1024) - -/* Verify the first 16 busses. We assume that systems with more busses - get MCFG right. */ -#define MAX_CHECK_BUS 16 - -static DECLARE_BITMAP(fallback_slots, 32*MAX_CHECK_BUS); - /* Static virtual mapping of the MMCONFIG aperture */ struct mmcfg_virt { struct acpi_mcfg_allocation *cfg; @@ -32,30 +22,17 @@ static struct mmcfg_virt *pci_mmcfg_virt; static char __iomem *get_virt(unsigned int seg, unsigned bus) { - int cfg_num = -1; struct acpi_mcfg_allocation *cfg; + int cfg_num; - while (1) { - ++cfg_num; - if (cfg_num >= pci_mmcfg_config_num) - break; + for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) { cfg = pci_mmcfg_virt[cfg_num].cfg; - if (cfg->pci_segment != seg) - continue; - if ((cfg->start_bus_number <= bus) && + if (cfg->pci_segment == seg && + (cfg->start_bus_number <= bus) && (cfg->end_bus_number >= bus)) return pci_mmcfg_virt[cfg_num].virt; } - /* Handle more broken MCFG tables on Asus etc. - They only contain a single entry for bus 0-0. Assume - this applies to all busses. */ - cfg = &pci_mmcfg_config[0]; - if (pci_mmcfg_config_num == 1 && - cfg->pci_segment == 0 && - (cfg->start_bus_number | cfg->end_bus_number) == 0) - return pci_mmcfg_virt[0].virt; - /* Fall back to type 0 */ return NULL; } @@ -63,8 +40,8 @@ static char __iomem *get_virt(unsigned int seg, unsigned bus) static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn) { char __iomem *addr; - if (seg == 0 && bus < MAX_CHECK_BUS && - test_bit(32*bus + PCI_SLOT(devfn), fallback_slots)) + if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS && + test_bit(32*bus + PCI_SLOT(devfn), pci_mmcfg_fallback_slots)) return NULL; addr = get_virt(seg, bus); if (!addr) @@ -135,81 +112,46 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; -/* K8 systems have some devices (typically in the builtin northbridge) - that are only accessible using type1 - Normally this can be expressed in the MCFG by not listing them - and assigning suitable _SEGs, but this isn't implemented in some BIOS. - Instead try to discover all devices on bus 0 that are unreachable using MM - and fallback for them. */ -static __init void unreachable_devices(void) +static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg) { - int i, k; - /* Use the max bus number from ACPI here? */ - for (k = 0; k < MAX_CHECK_BUS; k++) { - for (i = 0; i < 32; i++) { - u32 val1; - char __iomem *addr; - - pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1); - if (val1 == 0xffffffff) - continue; - addr = pci_dev_base(0, k, PCI_DEVFN(i, 0)); - if (addr == NULL|| readl(addr) != val1) { - set_bit(i + 32*k, fallback_slots); - printk(KERN_NOTICE "PCI: No mmconfig possible" - " on device %02x:%02x\n", k, i); - } - } + void __iomem *addr; + u32 size; + + size = (cfg->end_bus_number + 1) << 20; + addr = ioremap_nocache(cfg->address, size); + if (addr) { + printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n", + cfg->address, cfg->address + size - 1); } + return addr; } -void __init pci_mmcfg_init(int type) +int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus, + unsigned int devfn) { - int i; - - if ((pci_probe & PCI_PROBE_MMCONF) == 0) - return; - - if (acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg)) - return; - - if ((pci_mmcfg_config_num == 0) || - (pci_mmcfg_config == NULL) || - (pci_mmcfg_config[0].address == 0)) - return; - - /* Only do this check when type 1 works. If it doesn't work - assume we run on a Mac and always use MCFG */ - if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address, - pci_mmcfg_config[0].address + MMCONFIG_APER_MIN, - E820_RESERVED)) { - printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n", - (unsigned long)pci_mmcfg_config[0].address); - printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); - return; - } + return pci_dev_base(seg, bus, devfn) != NULL; +} - pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL); +int __init pci_mmcfg_arch_init(void) +{ + int i; + pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * + pci_mmcfg_config_num, GFP_KERNEL); if (pci_mmcfg_virt == NULL) { printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n"); - return; + return 0; } + for (i = 0; i < pci_mmcfg_config_num; ++i) { pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i]; - pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].address, - MMCONFIG_APER_MAX); + pci_mmcfg_virt[i].virt = mcfg_ioremap(&pci_mmcfg_config[i]); if (!pci_mmcfg_virt[i].virt) { printk(KERN_ERR "PCI: Cannot map mmconfig aperture for " "segment %d\n", pci_mmcfg_config[i].pci_segment); - return; + return 0; } - printk(KERN_INFO "PCI: Using MMCONFIG at %lx\n", - (unsigned long)pci_mmcfg_config[i].address); } - - unreachable_devices(); - raw_pci_ops = &pci_mmcfg; - pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; + return 1; } |