17 files changed, 698 insertions, 127 deletions

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 2db42b18f53..8517c3c3eb3 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -436,7 +436,7 @@ __und_usr:
 	usr_entry
 
 	tst	r3, #PSR_T_BIT			@ Thumb mode?
-	bne	fpundefinstr			@ ignore FP
+	bne	__und_usr_unknown		@ ignore FP
 	sub	r4, r2, #4
 
 	@
@@ -448,7 +448,7 @@ __und_usr:
 	@
 1:	ldrt	r0, [r4]
 	adr	r9, ret_from_exception
-	adr	lr, fpundefinstr
+	adr	lr, __und_usr_unknown
 	@
 	@ fallthrough to call_fpe
 	@
@@ -476,7 +476,9 @@ __und_usr:
  * Emulators may wish to make use of the following registers:
  *  r0  = instruction opcode.
  *  r2  = PC+4
+ *  r9  = normal "successful" return address
  *  r10 = this threads thread_info structure.
+ *  lr  = unrecognised instruction return address
  */
 call_fpe:
 	tst	r0, #0x08000000			@ only CDP/CPRT/LDC/STC have bit 27
@@ -545,10 +547,12 @@ do_fpe:
 
 	.data
 ENTRY(fp_enter)
-	.word	fpundefinstr
+	.word	no_fp
 	.text
 
-fpundefinstr:
+no_fp:	mov	pc, lr
+
+__und_usr_unknown:
 	mov	r0, sp
 	adr	lr, ret_from_exception
 	b	do_undefinstr
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 6ff5e3ff6cb..3c8cdcfe8d4 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -29,6 +29,8 @@
 #include <linux/timer.h>
 #include <linux/irq.h>
 
+#include <linux/mc146818rtc.h>
+
 #include <asm/leds.h>
 #include <asm/thread_info.h>
 #include <asm/mach/time.h>
@@ -85,6 +87,17 @@ unsigned long long __attribute__((weak)) sched_clock(void)
 	return (unsigned long long)jiffies * (1000000000 / HZ);
 }
 
+/*
+ * An implementation of printk_clock() independent from
+ * sched_clock().  This avoids non-bootable kernels when
+ * printk_clock is enabled.
+ */
+unsigned long long printk_clock(void)
+{
+	return (unsigned long long)(jiffies - INITIAL_JIFFIES) *
+			(1000000000 / HZ);
+}
+
 static unsigned long next_rtc_update;
 
 /*
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 042a12982e9..908915675ed 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -27,6 +27,7 @@
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
 #include <asm/traps.h>
+#include <asm/io.h>
 
 #include "ptrace.h"
 #include "signal.h"
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 628348c9f6c..9df507d36e0 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -202,3 +202,42 @@ void flush_dcache_page(struct page *page)
 	}
 }
 EXPORT_SYMBOL(flush_dcache_page);
+
+/*
+ * Flush an anonymous page so that users of get_user_pages()
+ * can safely access the data.  The expected sequence is:
+ *
+ *  get_user_pages()
+ *    -> flush_anon_page
+ *  memcpy() to/from page
+ *  if written to page, flush_dcache_page()
+ */
+void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr)
+{
+	unsigned long pfn;
+
+	/* VIPT non-aliasing caches need do nothing */
+	if (cache_is_vipt_nonaliasing())
+		return;
+
+	/*
+	 * Write back and invalidate userspace mapping.
+	 */
+	pfn = page_to_pfn(page);
+	if (cache_is_vivt()) {
+		flush_cache_page(vma, vmaddr, pfn);
+	} else {
+		/*
+		 * For aliasing VIPT, we can flush an alias of the
+		 * userspace address only.
+		 */
+		flush_pfn_alias(pfn, vmaddr);
+	}
+
+	/*
+	 * Invalidate kernel mapping.  No data should be contained
+	 * in this mapping of the page.  FIXME: this is overkill
+	 * since we actually ask for a write-back and invalidate.
+	 */
+	__cpuc_flush_dcache_page(page_address(page));
+}
diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c
index f44a01357ad..2ef857c3ee5 100644
--- a/arch/mips/kernel/mips_ksyms.c
+++ b/arch/mips/kernel/mips_ksyms.c
@@ -46,5 +46,7 @@ EXPORT_SYMBOL(__strnlen_user_nocheck_asm);
 EXPORT_SYMBOL(__strnlen_user_asm);
 
 EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+EXPORT_SYMBOL(__csum_partial_copy_user);
 
 EXPORT_SYMBOL(invalid_pte_table);
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 11aab6d6bfe..8aa544f73a5 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -94,10 +94,8 @@ static void c0_timer_ack(void)
 {
 	unsigned int count;
 
-#ifndef CONFIG_SOC_PNX8550	/* pnx8550 resets to zero */
 	/* Ack this timer interrupt and set the next one.  */
 	expirelo += cycles_per_jiffy;
-#endif
 	write_c0_compare(expirelo);
 
 	/* Check to see if we have missed any timer interrupts.  */
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index 888b61ea12f..989c900b8b1 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -2,7 +2,7 @@
 # Makefile for MIPS-specific library files..
 #
 
-lib-y	+= csum_partial.o csum_partial_copy.o memcpy.o promlib.o \
+lib-y	+= csum_partial.o memcpy.o promlib.o \
 	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o
 
 obj-y	+= iomap.o
diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S
index 9db357294be..c0a77fe038b 100644
--- a/arch/mips/lib/csum_partial.S
+++ b/arch/mips/lib/csum_partial.S
@@ -8,7 +8,9 @@
  * Copyright (C) 1998, 1999 Ralf Baechle
  * Copyright (C) 1999 Silicon Graphics, Inc.
  */
+#include <linux/errno.h>
 #include <asm/asm.h>
+#include <asm/asm-offsets.h>
 #include <asm/regdef.h>
 
 #ifdef CONFIG_64BIT
@@ -271,3 +273,443 @@ small_csumcpy:
 	jr	ra
 	.set	noreorder
 	END(csum_partial)
+
+
+/*
+ * checksum and copy routines based on memcpy.S
+ *
+ *	csum_partial_copy_nocheck(src, dst, len, sum)
+ *	__csum_partial_copy_user(src, dst, len, sum, errp)
+ *
+ * See "Spec" in memcpy.S for details.  Unlike __copy_user, all
+ * function in this file use the standard calling convention.
+ */
+
+#define src a0
+#define dst a1
+#define len a2
+#define psum a3
+#define sum v0
+#define odd t8
+#define errptr t9
+
+/*
+ * The exception handler for loads requires that:
+ *  1- AT contain the address of the byte just past the end of the source
+ *     of the copy,
+ *  2- src_entry <= src < AT, and
+ *  3- (dst - src) == (dst_entry - src_entry),
+ * The _entry suffix denotes values when __copy_user was called.
+ *
+ * (1) is set up up by __csum_partial_copy_from_user and maintained by
+ *	not writing AT in __csum_partial_copy
+ * (2) is met by incrementing src by the number of bytes copied
+ * (3) is met by not doing loads between a pair of increments of dst and src
+ *
+ * The exception handlers for stores stores -EFAULT to errptr and return.
+ * These handlers do not need to overwrite any data.
+ */
+
+#define EXC(inst_reg,addr,handler)		\
+9:	inst_reg, addr;				\
+	.section __ex_table,"a";		\
+	PTR	9b, handler;			\
+	.previous
+
+#ifdef USE_DOUBLE
+
+#define LOAD   ld
+#define LOADL  ldl
+#define LOADR  ldr
+#define STOREL sdl
+#define STORER sdr
+#define STORE  sd
+#define ADD    daddu
+#define SUB    dsubu
+#define SRL    dsrl
+#define SLL    dsll
+#define SLLV   dsllv
+#define SRLV   dsrlv
+#define NBYTES 8
+#define LOG_NBYTES 3
+
+#else
+
+#define LOAD   lw
+#define LOADL  lwl
+#define LOADR  lwr
+#define STOREL swl
+#define STORER swr
+#define STORE  sw
+#define ADD    addu
+#define SUB    subu
+#define SRL    srl
+#define SLL    sll
+#define SLLV   sllv
+#define SRLV   srlv
+#define NBYTES 4
+#define LOG_NBYTES 2
+
+#endif /* USE_DOUBLE */
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define LDFIRST LOADR
+#define LDREST  LOADL
+#define STFIRST STORER
+#define STREST  STOREL
+#define SHIFT_DISCARD SLLV
+#define SHIFT_DISCARD_REVERT SRLV
+#else
+#define LDFIRST LOADL
+#define LDREST  LOADR
+#define STFIRST STOREL
+#define STREST  STORER
+#define SHIFT_DISCARD SRLV
+#define SHIFT_DISCARD_REVERT SLLV
+#endif
+
+#define FIRST(unit) ((unit)*NBYTES)
+#define REST(unit)  (FIRST(unit)+NBYTES-1)
+
+#define ADDRMASK (NBYTES-1)
+
+	.set	noat
+
+LEAF(__csum_partial_copy_user)
+	PTR_ADDU	AT, src, len	/* See (1) above. */
+#ifdef CONFIG_64BIT
+	move	errptr, a4
+#else
+	lw	errptr, 16(sp)
+#endif
+FEXPORT(csum_partial_copy_nocheck)
+	move	sum, zero
+	move	odd, zero
+	/*
+	 * Note: dst & src may be unaligned, len may be 0
+	 * Temps
+	 */
+	/*
+	 * The "issue break"s below are very approximate.
+	 * Issue delays for dcache fills will perturb the schedule, as will
+	 * load queue full replay traps, etc.
+	 *
+	 * If len < NBYTES use byte operations.
+	 */
+	sltu	t2, len, NBYTES
+	and	t1, dst, ADDRMASK
+	bnez	t2, copy_bytes_checklen
+	 and	t0, src, ADDRMASK
+	andi	odd, dst, 0x1			/* odd buffer? */
+	bnez	t1, dst_unaligned
+	 nop
+	bnez	t0, src_unaligned_dst_aligned
+	/*
+	 * use delay slot for fall-through
+	 * src and dst are aligned; need to compute rem
+	 */
+both_aligned:
+	 SRL	t0, len, LOG_NBYTES+3    # +3 for 8 units/iter
+	beqz	t0, cleanup_both_aligned # len < 8*NBYTES
+	 nop
+	SUB	len, 8*NBYTES		# subtract here for bgez loop
+	.align	4
+1:
+EXC(	LOAD	t0, UNIT(0)(src),	l_exc)
+EXC(	LOAD	t1, UNIT(1)(src),	l_exc_copy)
+EXC(	LOAD	t2, UNIT(2)(src),	l_exc_copy)
+EXC(	LOAD	t3, UNIT(3)(src),	l_exc_copy)
+EXC(	LOAD	t4, UNIT(4)(src),	l_exc_copy)
+EXC(	LOAD	t5, UNIT(5)(src),	l_exc_copy)
+EXC(	LOAD	t6, UNIT(6)(src),	l_exc_copy)
+EXC(	LOAD	t7, UNIT(7)(src),	l_exc_copy)
+	SUB	len, len, 8*NBYTES
+	ADD	src, src, 8*NBYTES
+EXC(	STORE	t0, UNIT(0)(dst),	s_exc)
+	ADDC(sum, t0)
+EXC(	STORE	t1, UNIT(1)(dst),	s_exc)
+	ADDC(sum, t1)
+EXC(	STORE	t2, UNIT(2)(dst),	s_exc)
+	ADDC(sum, t2)
+EXC(	STORE	t3, UNIT(3)(dst),	s_exc)
+	ADDC(sum, t3)
+EXC(	STORE	t4, UNIT(4)(dst),	s_exc)
+	ADDC(sum, t4)
+EXC(	STORE	t5, UNIT(5)(dst),	s_exc)
+	ADDC(sum, t5)
+EXC(	STORE	t6, UNIT(6)(dst),	s_exc)
+	ADDC(sum, t6)
+EXC(	STORE	t7, UNIT(7)(dst),	s_exc)
+	ADDC(sum, t7)
+	bgez	len, 1b
+	 ADD	dst, dst, 8*NBYTES
+	ADD	len, 8*NBYTES		# revert len (see above)
+
+	/*
+	 * len == the number of bytes left to copy < 8*NBYTES
+	 */
+cleanup_both_aligned:
+#define rem t7
+	beqz	len, done
+	 sltu	t0, len, 4*NBYTES
+	bnez	t0, less_than_4units
+	 and	rem, len, (NBYTES-1)	# rem = len % NBYTES
+	/*
+	 * len >= 4*NBYTES
+	 */
+EXC(	LOAD	t0, UNIT(0)(src),	l_exc)
+EXC(	LOAD	t1, UNIT(1)(src),	l_exc_copy)
+EXC(	LOAD	t2, UNIT(2)(src),	l_exc_copy)
+EXC(	LOAD	t3, UNIT(3)(src),	l_exc_copy)
+	SUB	len, len, 4*NBYTES
+	ADD	src, src, 4*NBYTES
+EXC(	STORE	t0, UNIT(0)(dst),	s_exc)
+	ADDC(sum, t0)
+EXC(	STORE	t1, UNIT(1)(dst),	s_exc)
+	ADDC(sum, t1)
+EXC(	STORE	t2, UNIT(2)(dst),	s_exc)
+	ADDC(sum, t2)
+EXC(	STORE	t3, UNIT(3)(dst),	s_exc)
+	ADDC(sum, t3)
+	beqz	len, done
+	 ADD	dst, dst, 4*NBYTES
+less_than_4units:
+	/*
+	 * rem = len % NBYTES
+	 */
+	beq	rem, len, copy_bytes
+	 nop
+1:
+EXC(	LOAD	t0, 0(src),		l_exc)
+	ADD	src, src, NBYTES
+	SUB	len, len, NBYTES
+EXC(	STORE	t0, 0(dst),		s_exc)
+	ADDC(sum, t0)
+	bne	rem, len, 1b
+	 ADD	dst, dst, NBYTES
+
+	/*
+	 * src and dst are aligned, need to copy rem bytes (rem < NBYTES)
+	 * A loop would do only a byte at a time with possible branch
+	 * mispredicts.  Can't do an explicit LOAD dst,mask,or,STORE
+	 * because can't assume read-access to dst.  Instead, use
+	 * STREST dst, which doesn't require read access to dst.
+	 *
+	 * This code should perform better than a simple loop on modern,
+	 * wide-issue mips processors because the code has fewer branches and
+	 * more instruction-level parallelism.
+	 */
+#define bits t2
+	beqz	len, done
+	 ADD	t1, dst, len	# t1 is just past last byte of dst
+	li	bits, 8*NBYTES
+	SLL	rem, len, 3	# rem = number of bits to keep
+EXC(	LOAD	t0, 0(src),		l_exc)
+	SUB	bits, bits, rem	# bits = number of bits to discard
+	SHIFT_DISCARD t0, t0, bits
+EXC(	STREST	t0, -1(t1),		s_exc)
+	SHIFT_DISCARD_REVERT t0, t0, bits
+	.set reorder
+	ADDC(sum, t0)
+	b	done
+	.set noreorder
+dst_unaligned:
+	/*
+	 * dst is unaligned
+	 * t0 = src & ADDRMASK
+	 * t1 = dst & ADDRMASK; T1 > 0
+	 * len >= NBYTES
+	 *
+	 * Copy enough bytes to align dst
+	 * Set match = (src and dst have same alignment)
+	 */
+#define match rem
+EXC(	LDFIRST	t3, FIRST(0)(src),	l_exc)
+	ADD	t2, zero, NBYTES
+EXC(	LDREST	t3, REST(0)(src),	l_exc_copy)
+	SUB	t2, t2, t1	# t2 = number of bytes copied
+	xor	match, t0, t1
+EXC(	STFIRST t3, FIRST(0)(dst),	s_exc)
+	SLL	t4, t1, 3		# t4 = number of bits to discard
+	SHIFT_DISCARD t3, t3, t4
+	/* no SHIFT_DISCARD_REVERT to handle odd buffer properly */
+	ADDC(sum, t3)
+	beq	len, t2, done
+	 SUB	len, len, t2
+	ADD	dst, dst, t2
+	beqz	match, both_aligned
+	 ADD	src, src, t2
+
+src_unaligned_dst_aligned:
+	SRL	t0, len, LOG_NBYTES+2    # +2 for 4 units/iter
+	beqz	t0, cleanup_src_unaligned
+	 and	rem, len, (4*NBYTES-1)   # rem = len % 4*NBYTES
+1:
+/*
+ * Avoid consecutive LD*'s to the same register since some mips
+ * implementations can't issue them in the same cycle.
+ * It's OK to load FIRST(N+1) before REST(N) because the two addresses
+ * are to the same unit (unless src is aligned, but it's not).
+ */
+EXC(	LDFIRST	t0, FIRST(0)(src),	l_exc)
+EXC(	LDFIRST	t1, FIRST(1)(src),	l_exc_copy)
+	SUB     len, len, 4*NBYTES
+EXC(	LDREST	t0, REST(0)(src),	l_exc_copy)
+EXC(	LDREST	t1, REST(1)(src),	l_exc_copy)
+EXC(	LDFIRST	t2, FIRST(2)(src),	l_exc_copy)
+EXC(	LDFIRST	t3, FIRST(3)(src),	l_exc_copy)
+EXC(	LDREST	t2, REST(2)(src),	l_exc_copy)
+EXC(	LDREST	t3, REST(3)(src),	l_exc_copy)
+	ADD	src, src, 4*NBYTES
+#ifdef CONFIG_CPU_SB1
+	nop				# improves slotting
+#endif
+EXC(	STORE	t0, UNIT(0)(dst),	s_exc)
+	ADDC(sum, t0)
+EXC(	STORE	t1, UNIT(1)(dst),	s_exc)
+	ADDC(sum, t1)
+EXC(	STORE	t2, UNIT(2)(dst),	s_exc)
+	ADDC(sum, t2)
+EXC(	STORE	t3, UNIT(3)(dst),	s_exc)
+	ADDC(sum, t3)
+	bne	len, rem, 1b
+	 ADD	dst, dst, 4*NBYTES
+
+cleanup_src_unaligned:
+	beqz	len, done
+	 and	rem, len, NBYTES-1  # rem = len % NBYTES
+	beq	rem, len, copy_bytes
+	 nop
+1:
+EXC(	LDFIRST t0, FIRST(0)(src),	l_exc)
+EXC(	LDREST	t0, REST(0)(src),	l_exc_copy)
+	ADD	src, src, NBYTES
+	SUB	len, len, NBYTES
+EXC(	STORE	t0, 0(dst),		s_exc)
+	ADDC(sum, t0)
+	bne	len, rem, 1b
+	 ADD	dst, dst, NBYTES
+
+copy_bytes_checklen:
+	beqz	len, done
+	 nop
+copy_bytes:
+	/* 0 < len < NBYTES  */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define SHIFT_START 0
+#define SHIFT_INC 8
+#else
+#define SHIFT_START 8*(NBYTES-1)
+#define SHIFT_INC -8
+#endif
+	move	t2, zero	# partial word
+	li	t3, SHIFT_START	# shift
+/* use l_exc_copy here to return correct sum on fault */
+#define COPY_BYTE(N)			\
+EXC(	lbu	t0, N(src), l_exc_copy);	\
+	SUB	len, len, 1;		\
+EXC(	sb	t0, N(dst), s_exc);	\
+	SLLV	t0, t0, t3;		\
+	addu	t3, SHIFT_INC;		\
+	beqz	len, copy_bytes_done;	\
+	 or	t2, t0
+
+	COPY_BYTE(0)
+	COPY_BYTE(1)
+#ifdef USE_DOUBLE
+	COPY_BYTE(2)
+	COPY_BYTE(3)
+	COPY_BYTE(4)
+	COPY_BYTE(5)
+#endif
+EXC(	lbu	t0, NBYTES-2(src), l_exc_copy)
+	SUB	len, len, 1
+EXC(	sb	t0, NBYTES-2(dst), s_exc)
+	SLLV	t0, t0, t3
+	or	t2, t0
+copy_bytes_done:
+	ADDC(sum, t2)
+done:
+	/* fold checksum */
+#ifdef USE_DOUBLE
+	dsll32	v1, sum, 0
+	daddu	sum, v1
+	sltu	v1, sum, v1
+	dsra32	sum, sum, 0
+	addu	sum, v1
+#endif
+	sll	v1, sum, 16
+	addu	sum, v1
+	sltu	v1, sum, v1
+	srl	sum, sum, 16
+	addu	sum, v1
+
+	/* odd buffer alignment? */
+	beqz	odd, 1f
+	 nop
+	sll	v1, sum, 8
+	srl	sum, sum, 8
+	or	sum, v1
+	andi	sum, 0xffff
+1:
+	.set reorder
+	ADDC(sum, psum)
+	jr	ra
+	.set noreorder
+
+l_exc_copy:
+	/*
+	 * Copy bytes from src until faulting load address (or until a
+	 * lb faults)
+	 *
+	 * When reached by a faulting LDFIRST/LDREST, THREAD_BUADDR($28)
+	 * may be more than a byte beyond the last address.
+	 * Hence, the lb below may get an exception.
+	 *
+	 * Assumes src < THREAD_BUADDR($28)
+	 */
+	LOAD	t0, TI_TASK($28)
+	 li	t2, SHIFT_START
+	LOAD	t0, THREAD_BUADDR(t0)
+1:
+EXC(	lbu	t1, 0(src),	l_exc)
+	ADD	src, src, 1
+	sb	t1, 0(dst)	# can't fault -- we're copy_from_user
+	SLLV	t1, t1, t2
+	addu	t2, SHIFT_INC
+	ADDC(sum, t1)
+	bne	src, t0, 1b
+	 ADD	dst, dst, 1
+l_exc:
+	LOAD	t0, TI_TASK($28)
+	 nop
+	LOAD	t0, THREAD_BUADDR(t0)	# t0 is just past last good address
+	 nop
+	SUB	len, AT, t0		# len number of uncopied bytes
+	/*
+	 * Here's where we rely on src and dst being incremented in tandem,
+	 *   See (3) above.
+	 * dst += (fault addr - src) to put dst at first byte to clear
+	 */
+	ADD	dst, t0			# compute start address in a1
+	SUB	dst, src
+	/*
+	 * Clear len bytes starting at dst.  Can't call __bzero because it
+	 * might modify len.  An inefficient loop for these rare times...
+	 */
+	beqz	len, done
+	 SUB	src, len, 1
+1:	sb	zero, 0(dst)
+	ADD	dst, dst, 1
+	bnez	src, 1b
+	 SUB	src, src, 1
+	li	v1, -EFAULT
+	b	done
+	 sw	v1, (errptr)
+
+s_exc:
+	li	v0, -1 /* invalid checksum */
+	li	v1, -EFAULT
+	jr	ra
+	 sw	v1, (errptr)
+	END(__csum_partial_copy_user)
diff --git a/arch/mips/lib/csum_partial_copy.c b/arch/mips/lib/csum_partial_copy.c
deleted file mode 100644
index 06771040a26..00000000000
--- a/arch/mips/lib/csum_partial_copy.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994, 1995 Waldorf Electronics GmbH
- * Copyright (C) 1998, 1999 Ralf Baechle
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <asm/string.h>
-#include <asm/uaccess.h>
-#include <net/checksum.h>
-
-/*
- * copy while checksumming, otherwise like csum_partial
- */
-__wsum csum_partial_copy_nocheck(const void *src,
-	void *dst, int len, __wsum sum)
-{
-	/*
-	 * It's 2:30 am and I don't feel like doing it real ...
-	 * This is lots slower than the real thing (tm)
-	 */
-	sum = csum_partial(src, len, sum);
-	memcpy(dst, src, len);
-
-	return sum;
-}
-
-EXPORT_SYMBOL(csum_partial_copy_nocheck);
-
-/*
- * Copy from userspace and compute checksum.  If we catch an exception
- * then zero the rest of the buffer.
- */
-__wsum csum_partial_copy_from_user (const void __user *src,
-	void *dst, int len, __wsum sum, int *err_ptr)
-{
-	int missing;
-
-	might_sleep();
-	missing = copy_from_user(dst, src, len);
-	if (missing) {
-		memset(dst + len - missing, 0, missing);
-		*err_ptr = -EFAULT;
-	}
-
-	return csum_partial(dst, len, sum);
-}
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index e4604c73f02..a3c3a1d462b 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -47,6 +47,9 @@
 #ifdef CONFIG_MIPS_MALTA
 #include <asm/mips-boards/maltaint.h>
 #endif
+#ifdef CONFIG_MIPS_SEAD
+#include <asm/mips-boards/seadint.h>
+#endif
 
 unsigned long cpu_khz;
 
@@ -263,11 +266,13 @@ void __init mips_time_init(void)
 
 void __init plat_timer_setup(struct irqaction *irq)
 {
+#ifdef MSC01E_INT_BASE
 	if (cpu_has_veic) {
 		set_vi_handler (MSC01E_INT_CPUCTR, mips_timer_dispatch);
 		mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
-	}
-	else {
+	} else
+#endif
+	{
 		if (cpu_has_vint)
 			set_vi_handler (MIPSCPU_INT_CPUCTR, mips_timer_dispatch);
 		mips_cpu_timer_irq = MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR;
diff --git a/arch/mips/mips-boards/malta/malta_mtd.c b/arch/mips/mips-boards/malta/malta_mtd.c
new file mode 100644
index 00000000000..8ad9bdf25dc
--- /dev/null
+++ b/arch/mips/mips-boards/malta/malta_mtd.c
@@ -0,0 +1,63 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 MIPS Technologies, Inc.
+ *     written by Ralf Baechle <ralf@linux-mips.org>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <mtd/mtd-abi.h>
+
+static struct mtd_partition malta_mtd_partitions[] = {
+	{
+		.name =		"YAMON",
+		.offset =	0x0,
+		.size =		0x100000,
+		.mask_flags =	MTD_WRITEABLE
+	}, {
+		.name =		"User FS",
+		.offset = 	0x100000,
+		.size =		0x2e0000
+	}, {
+		.name =		"Board Config",
+		.offset =	0x3e0000,
+		.size =		0x020000,
+		.mask_flags =	MTD_WRITEABLE
+	}
+};
+
+static struct physmap_flash_data malta_flash_data = {
+	.width		= 4,
+	.nr_parts	= ARRAY_SIZE(malta_mtd_partitions),
+	.parts		= malta_mtd_partitions
+};
+
+static struct resource malta_flash_resource = {
+	.start		= 0x1e000000,
+	.end		= 0x1e3fffff,
+	.flags		= IORESOURCE_MEM
+};
+
+static struct platform_device malta_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &malta_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &malta_flash_resource,
+};
+
+static int __init malta_mtd_init(void)
+{
+	platform_device_register(&malta_flash);
+
+	return 0;
+}
+
+module_init(malta_mtd_init)
diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c
index f445fcddfdf..874ccb0066b 100644
--- a/arch/mips/mips-boards/sead/sead_int.c
+++ b/arch/mips/mips-boards/sead/sead_int.c
@@ -21,7 +21,7 @@
  * Sead board.
  */
 #include <linux/init.h>
-#include <linux/irq.h>
+#include <linux/interrupt.h>
 
 #include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
@@ -108,7 +108,7 @@ asmlinkage void plat_irq_dispatch(void)
 	if (irq >= 0)
 		do_IRQ(MIPSCPU_INT_BASE + irq);
 	else
-		spurious_interrupt(regs);
+		spurious_interrupt();
 }
 
 void __init arch_init_irq(void)
diff --git a/arch/mips/mm/pg-r4k.c b/arch/mips/mm/pg-r4k.c
index d41fc5885e8..dc795be6280 100644
--- a/arch/mips/mm/pg-r4k.c
+++ b/arch/mips/mm/pg-r4k.c
@@ -243,11 +243,10 @@ static void __init __build_store_reg(int reg)
 
 static inline void build_store_reg(int reg)
 {
-	if (cpu_has_prefetch)
-		if (reg)
-			build_dst_pref(pref_offset_copy);
-		else
-			build_dst_pref(pref_offset_clear);
+	int pref_off = cpu_has_prefetch ?
+		(reg ? pref_offset_copy : pref_offset_clear) : 0;
+	if (pref_off)
+		build_dst_pref(pref_off);
 	else if (cpu_has_cache_cdex_s)
 		build_cdex_s();
 	else if (cpu_has_cache_cdex_p)
diff --git a/arch/mips/pci/ops-pnx8550.c b/arch/mips/pci/ops-pnx8550.c
index 454b65cc335..f556b7a8dcc 100644
--- a/arch/mips/pci/ops-pnx8550.c
+++ b/arch/mips/pci/ops-pnx8550.c
@@ -202,7 +202,7 @@ write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
 		break;
 	}
 
-	err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data);
+	err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, ~(1 << (where & 3)), &data);
 
 	return err;
 }
diff --git a/arch/mips/philips/pnx8550/common/time.c b/arch/mips/philips/pnx8550/common/time.c
index 65c440e8480..f80acae07ce 100644
--- a/arch/mips/philips/pnx8550/common/time.c
+++ b/arch/mips/philips/pnx8550/common/time.c
@@ -33,7 +33,17 @@
 #include <int.h>
 #include <cm.h>
 
-extern unsigned int mips_hpt_frequency;
+static unsigned long cpj;
+
+static cycle_t hpt_read(void)
+{
+	return read_c0_count2();
+}
+
+static void timer_ack(void)
+{
+	write_c0_compare(cpj);
+}
 
 /*
  * pnx8550_time_init() - it does the following things:
@@ -68,27 +78,47 @@ void pnx8550_time_init(void)
 	 * HZ timer interrupts per second.
 	 */
 	mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p));
+	cpj = (mips_hpt_frequency + HZ / 2) / HZ;
+	timer_ack();
+
+	/* Setup Timer 2 */
+	write_c0_count2(0);
+	write_c0_compare2(0xffffffff);
+
+	clocksource_mips.read = hpt_read;
+	mips_timer_ack = timer_ack;
+}
+
+static irqreturn_t monotonic_interrupt(int irq, void *dev_id)
+{
+	/* Timer 2 clear interrupt */
+	write_c0_compare2(-1);
+	return IRQ_HANDLED;
 }
 
+static struct irqaction monotonic_irqaction = {
+	.handler = monotonic_interrupt,
+	.flags = IRQF_DISABLED,
+	.name = "Monotonic timer",
+};
+
 void __init plat_timer_setup(struct irqaction *irq)
 {
 	int configPR;
 
 	setup_irq(PNX8550_INT_TIMER1, irq);
+	setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction);
 
-	/* Start timer1 */
+	/* Timer 1 start */
 	configPR = read_c0_config7();
 	configPR &= ~0x00000008;
 	write_c0_config7(configPR);
 
-	/* Timer 2 stop */
+	/* Timer 2 start */
 	configPR = read_c0_config7();
-	configPR |= 0x00000010;
+	configPR &= ~0x00000010;
 	write_c0_config7(configPR);
 
-	write_c0_count2(0);
-	write_c0_compare2(0xffffffff);
-
 	/* Timer 3 stop */
 	configPR = read_c0_config7();
 	configPR |= 0x00000020;
diff --git a/arch/x86_64/kernel/early-quirks.c b/arch/x86_64/kernel/early-quirks.c
index 829698f6d04..49802f1bee9 100644
--- a/arch/x86_64/kernel/early-quirks.c
+++ b/arch/x86_64/kernel/early-quirks.c
@@ -69,6 +69,11 @@ static void nvidia_bugs(void)
 
 static void ati_bugs(void)
 {
+	if (timer_over_8254 == 1) {
+		timer_over_8254 = 0;
+		printk(KERN_INFO
+	 	"ATI board detected. Disabling timer routing over 8254.\n");
+	}
 }
 
 static void intel_bugs(void)
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 2a1dcd5f69c..d7bad90a5ad 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -55,6 +55,10 @@ int sis_apic_bug; /* not actually supported, dummy for compile */
 
 static int no_timer_check;
 
+static int disable_timer_pin_1 __initdata;
+
+int timer_over_8254 __initdata = 1;
+
 /* Where if anywhere is the i8259 connect in external int mode */
 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 
@@ -350,6 +354,29 @@ static int __init disable_ioapic_setup(char *str)
 }
 early_param("noapic", disable_ioapic_setup);
 
+/* Actually the next is obsolete, but keep it for paranoid reasons -AK */
+static int __init disable_timer_pin_setup(char *arg)
+{
+	disable_timer_pin_1 = 1;
+	return 1;
+}
+__setup("disable_timer_pin_1", disable_timer_pin_setup);
+
+static int __init setup_disable_8254_timer(char *s)
+{
+	timer_over_8254 = -1;
+	return 1;
+}
+static int __init setup_enable_8254_timer(char *s)
+{
+	timer_over_8254 = 2;
+	return 1;
+}
+
+__setup("disable_8254_timer", setup_disable_8254_timer);
+__setup("enable_8254_timer", setup_enable_8254_timer);
+
+
 /*
  * Find the IRQ entry number of a certain pin.
  */
@@ -1568,33 +1595,10 @@ static inline void unlock_ExtINT_logic(void)
  * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
  * is so screwy.  Thanks to Brian Perkins for testing/hacking this beast
  * fanatically on his truly buggy board.
+ *
+ * FIXME: really need to revamp this for modern platforms only.
  */
-
-static int try_apic_pin(int apic, int pin, char *msg)
-{
-	apic_printk(APIC_VERBOSE, KERN_INFO
-		    "..TIMER: trying IO-APIC=%d PIN=%d %s",
-		    apic, pin, msg);
-
-	/*
-	 * Ok, does IRQ0 through the IOAPIC work?
-	 */
-	if (!no_timer_check && timer_irq_works()) {
-		nmi_watchdog_default();
-		if (nmi_watchdog == NMI_IO_APIC) {
-			disable_8259A_irq(0);
-			setup_nmi();
-			enable_8259A_irq(0);
-		}
-		return 1;
-	}
-	clear_IO_APIC_pin(apic, pin);
-	apic_printk(APIC_QUIET, KERN_ERR " .. failed\n");
-	return 0;
-}
-
-/* The function from hell */
-static void check_timer(void)
+static inline void check_timer(void)
 {
 	int apic1, pin1, apic2, pin2;
 	int vector;
@@ -1615,43 +1619,61 @@ static void check_timer(void)
 	 */
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	init_8259A(1);
+	if (timer_over_8254 > 0)
+		enable_8259A_irq(0);
 
 	pin1  = find_isa_irq_pin(0, mp_INT);
 	apic1 = find_isa_irq_apic(0, mp_INT);
 	pin2  = ioapic_i8259.pin;
 	apic2 = ioapic_i8259.apic;
 
-	/* Do this first, otherwise we get double interrupts on ATI boards */
-	if ((pin1 != -1) && try_apic_pin(apic1, pin1,"with 8259 IRQ0 disabled"))
-		return;
+	apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
+		vector, apic1, pin1, apic2, pin2);
 
-	/* Now try again with IRQ0 8259A enabled.
-	   Assumes timer is on IO-APIC 0 ?!? */
-	enable_8259A_irq(0);
-	unmask_IO_APIC_irq(0);
-	if (try_apic_pin(apic1, pin1, "with 8259 IRQ0 enabled"))
-		return;
-	disable_8259A_irq(0);
-
-	/* Always try pin0 and pin2 on APIC 0 to handle buggy timer overrides
-	   on Nvidia boards */
-	if (!(apic1 == 0 && pin1 == 0) &&
-	    try_apic_pin(0, 0, "fallback with 8259 IRQ0 disabled"))
-		return;
-	if (!(apic1 == 0 && pin1 == 2) &&
-	    try_apic_pin(0, 2, "fallback with 8259 IRQ0 disabled"))
-		return;
+	if (pin1 != -1) {
+		/*
+		 * Ok, does IRQ0 through the IOAPIC work?
+		 */
+		unmask_IO_APIC_irq(0);
+		if (!no_timer_check && timer_irq_works()) {
+			nmi_watchdog_default();
+			if (nmi_watchdog == NMI_IO_APIC) {
+				disable_8259A_irq(0);
+				setup_nmi();
+				enable_8259A_irq(0);
+			}
+			if (disable_timer_pin_1 > 0)
+				clear_IO_APIC_pin(0, pin1);
+			return;
+		}
+		clear_IO_APIC_pin(apic1, pin1);
+		apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not "
+				"connected to IO-APIC\n");
+	}
 
-	/* Then try pure 8259A routing on the 8259 as reported by BIOS*/
-	enable_8259A_irq(0);
+	apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) "
+				"through the 8259A ... ");
 	if (pin2 != -1) {
+		apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...",
+			apic2, pin2);
+		/*
+		 * legacy devices should be connected to IO APIC #0
+		 */
 		setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
-		if (try_apic_pin(apic2,pin2,"8259A broadcast ExtINT from BIOS"))
+		if (timer_irq_works()) {
+			apic_printk(APIC_VERBOSE," works.\n");
+			nmi_watchdog_default();
+			if (nmi_watchdog == NMI_IO_APIC) {
+				setup_nmi();
+			}
 			return;
+		}
+		/*
+		 * Cleanup, just in case ...
+		 */
+		clear_IO_APIC_pin(apic2, pin2);
 	}
-
-	/* Tried all possibilities to go through the IO-APIC. Now come the
-	   really cheesy fallbacks. */
+	apic_printk(APIC_VERBOSE," failed.\n");
 
 	if (nmi_watchdog == NMI_IO_APIC) {
 		printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");