1 files changed, 0 insertions, 162 deletions
diff --git a/drivers/acorn/block/mfm.S b/drivers/acorn/block/mfm.S
deleted file mode 100644
index c90cbd41ce2..00000000000
--- a/drivers/acorn/block/mfm.S
+++ /dev/null
@@ -1,162 +0,0 @@
-@ Read/Write DMA code for the ST506/MFM hard drive controllers on the A400 Acorn Archimedes
-@   motherboard and on ST506 expansion podules.
-@ (c) David Alan Gilbert (linux@treblig.org) 1996-1999
-
-#include <asm/assembler.h>
- 
-hdc63463_irqdata:
-@ Controller base address
-  .global hdc63463_baseaddress
-hdc63463_baseaddress:
-  .word 0
-
-  .global hdc63463_irqpolladdress
-hdc63463_irqpolladdress:
-  .word 0
- 
-  .global hdc63463_irqpollmask
-hdc63463_irqpollmask:
-  .word 0
-
-@ where to read/write data  from the kernel data space
-  .global hdc63463_dataptr
-hdc63463_dataptr:
-  .word 0
-
-@ Number of bytes left to transfer
-  .global hdc63463_dataleft
-hdc63463_dataleft:
-  .word 0
-
-@ -------------------------------------------------------------------------
-@ hdc63463_writedma: DMA from host to controller
-@  internal reg usage: r0=hdc base address, r1=irq poll address, r2=poll mask
-@                      r3=data ptr, r4=data left, r5,r6=temporary
-  .global hdc63463_writedma
-hdc63463_writedma:
-  stmfd sp!,{r4-r7}
-  adr r5,hdc63463_irqdata
-  ldmia r5,{r0,r1,r2,r3,r4}
-
-writedma_again:
-
-  @ test number of remaining bytes to transfer
-  cmp r4,#0
-  beq writedma_end
-  bmi writedma_end
-
-  @ Check the hdc is interrupting
-  ldrb r5,[r1,#0]
-  tst r5,r2
-  beq writedma_end
-
-  @ Transfer a block of upto 256 bytes
-  cmp r4,#256
-  movlt r7,r4
-  movge r7,#256
-
-  @ Check the hdc is still busy and command has not ended and no errors
-  ldr r5,[r0,#32]     @ Status reg - 16 bit - its the top few bits which are status
-  @ think we should continue DMA until it drops busy - perhaps this was
-  @ the main problem with corrected errors causing a hang
-  @tst r5,#0x3c00        @ Test for things which should be off
-  @bne writedma_end
-  and r5,r5,#0x8000        @ This is test for things which should be on: Busy
-  cmp r5,#0x8000
-  bne writedma_end 
-
-  @ Bytes remaining at end
-  sub r4,r4,r7
-
-  @ HDC Write register location
-  add r0,r0,#32+8
-
-writedma_loop:
-  @ OK - pretty sure we should be doing this
-
-  ldr r5,[r3],#4          @ Get a word to be written
-  @ get bottom half to be sent first
-  mov r6,r5,lsl#16        @ Separate the first 2 bytes
-  orr r2,r6,r6,lsr #16    @ Duplicate them in the bottom half of the word
-  @ now the top half
-  mov r6,r5,lsr#16        @ Get 2nd 2 bytes
-  orr r6,r6,r6,lsl#16     @ Duplicate
-  @str r6,[r0]       @ to hdc
-  stmia r0,{r2,r6}
-  subs r7,r7,#4           @ Dec. number of bytes left
-  bne writedma_loop
-
-  @ If we were too slow we had better go through again - DAG - took out with new interrupt routine
-  @ sub r0,r0,#32+8
-  @ adr r2,hdc63463_irqdata
-  @ ldr r2,[r2,#8]
-  @ b writedma_again
-
-writedma_end:
-  adr r5,hdc63463_irqdata+12
-  stmia r5,{r3,r4}
-  ldmfd sp!,{r4-r7}
-  RETINSTR(mov,pc,lr)
-
-@ -------------------------------------------------------------------------
-@ hdc63463_readdma: DMA from controller to host
-@  internal reg usage: r0=hdc base address, r1=irq poll address, r2=poll mask
-@                      r3=data ptr, r4=data left, r5,r6=temporary
-  .global hdc63463_readdma
-hdc63463_readdma:
-  stmfd sp!,{r4-r7}
-  adr r5,hdc63463_irqdata
-  ldmia r5,{r0,r1,r2,r3,r4}
-
-readdma_again:
-  @ test number of remaining bytes to transfer
-  cmp r4,#0
-  beq readdma_end
-  bmi readdma_end
-
-  @ Check the hdc is interrupting
-  ldrb r5,[r1,#0]
-  tst r5,r2
-  beq readdma_end
-
-  @ Check the hdc is still busy and command has not ended and no errors
-  ldr r5,[r0,#32]     @ Status reg - 16 bit - its the top few bits which are status
-  @ think we should continue DMA until it drops busy - perhaps this was
-  @ the main problem with corrected errors causing a hang
-  @tst r5,#0x3c00      @ Test for things which should be off
-  @bne readdma_end
-  and r5,r5,#0x8000        @ This is test for things which should be on: Busy
-  cmp r5,#0x8000
-  bne readdma_end 
-
-  @ Transfer a block of upto 256 bytes
-  cmp r4,#256
-  movlt r7,r4
-  movge r7,#256
-
-  @ Bytes remaining at end
-  sub r4,r4,r7
-
-  @ Set a pointer to the data register in the HDC
-  add r0,r0,#8
-readdma_loop:
-  @ OK - pretty sure we should be doing this
-  ldmia r0,{r5,r6}
-  mov r5,r5,lsl#16
-  mov r6,r6,lsl#16
-  orr r6,r6,r5,lsr #16
-  str r6,[r3],#4
-  subs r7,r7,#4        @ Decrement bytes to go
-  bne readdma_loop
-
-  @ Try reading multiple blocks - if this was fast enough then I do not think
-  @ this should help - NO taken out DAG - new interrupt handler has
-  @ non-consecutive memory blocks
-  @ sub r0,r0,#8
-  @ b readdma_again
-
-readdma_end:
-  adr r5,hdc63463_irqdata+12
-  stmia r5,{r3,r4}
-  ldmfd sp!,{r4-r7}
-  RETINSTR(mov,pc,lr)