diff options
Diffstat (limited to 'drivers/acpi/sleep')
| -rw-r--r-- | drivers/acpi/sleep/Makefile | 5 | ||||
| -rw-r--r-- | drivers/acpi/sleep/main.c | 696 | ||||
| -rw-r--r-- | drivers/acpi/sleep/proc.c | 526 | ||||
| -rw-r--r-- | drivers/acpi/sleep/sleep.h | 7 | ||||
| -rw-r--r-- | drivers/acpi/sleep/wakeup.c | 173 |
5 files changed, 0 insertions, 1407 deletions
diff --git a/drivers/acpi/sleep/Makefile b/drivers/acpi/sleep/Makefile deleted file mode 100644 index f1fb888c2d2..00000000000 --- a/drivers/acpi/sleep/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -obj-y := wakeup.o -obj-y += main.o -obj-$(CONFIG_ACPI_SLEEP) += proc.o - -EXTRA_CFLAGS += $(ACPI_CFLAGS) diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c deleted file mode 100644 index 28a691cc625..00000000000 --- a/drivers/acpi/sleep/main.c +++ /dev/null @@ -1,696 +0,0 @@ -/* - * sleep.c - ACPI sleep support. - * - * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> - * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com> - * Copyright (c) 2000-2003 Patrick Mochel - * Copyright (c) 2003 Open Source Development Lab - * - * This file is released under the GPLv2. - * - */ - -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/dmi.h> -#include <linux/device.h> -#include <linux/suspend.h> -#include <linux/reboot.h> - -#include <asm/io.h> - -#include <acpi/acpi_bus.h> -#include <acpi/acpi_drivers.h> -#include "sleep.h" - -u8 sleep_states[ACPI_S_STATE_COUNT]; - -static void acpi_sleep_tts_switch(u32 acpi_state) -{ - union acpi_object in_arg = { ACPI_TYPE_INTEGER }; - struct acpi_object_list arg_list = { 1, &in_arg }; - acpi_status status = AE_OK; - - in_arg.integer.value = acpi_state; - status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - /* - * OS can't evaluate the _TTS object correctly. Some warning - * message will be printed. But it won't break anything. - */ - printk(KERN_NOTICE "Failure in evaluating _TTS object\n"); - } -} - -static int tts_notify_reboot(struct notifier_block *this, - unsigned long code, void *x) -{ - acpi_sleep_tts_switch(ACPI_STATE_S5); - return NOTIFY_DONE; -} - -static struct notifier_block tts_notifier = { - .notifier_call = tts_notify_reboot, - .next = NULL, - .priority = 0, -}; - -static int acpi_sleep_prepare(u32 acpi_state) -{ -#ifdef CONFIG_ACPI_SLEEP - /* do we have a wakeup address for S2 and S3? */ - if (acpi_state == ACPI_STATE_S3) { - if (!acpi_wakeup_address) { - return -EFAULT; - } - acpi_set_firmware_waking_vector( - (acpi_physical_address)acpi_wakeup_address); - - } - ACPI_FLUSH_CPU_CACHE(); - acpi_enable_wakeup_device_prep(acpi_state); -#endif - printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n", - acpi_state); - acpi_enter_sleep_state_prep(acpi_state); - return 0; -} - -#ifdef CONFIG_ACPI_SLEEP -static u32 acpi_target_sleep_state = ACPI_STATE_S0; -/* - * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the - * user to request that behavior by using the 'acpi_old_suspend_ordering' - * kernel command line option that causes the following variable to be set. - */ -static bool old_suspend_ordering; - -void __init acpi_old_suspend_ordering(void) -{ - old_suspend_ordering = true; -} - -/* - * According to the ACPI specification the BIOS should make sure that ACPI is - * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, - * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI - * on such systems during resume. Unfortunately that doesn't help in - * particularly pathological cases in which SCI_EN has to be set directly on - * resume, although the specification states very clearly that this flag is - * owned by the hardware. The set_sci_en_on_resume variable will be set in such - * cases. - */ -static bool set_sci_en_on_resume; - -/** - * acpi_pm_disable_gpes - Disable the GPEs. - */ -static int acpi_pm_disable_gpes(void) -{ - acpi_hw_disable_all_gpes(); - return 0; -} - -/** - * __acpi_pm_prepare - Prepare the platform to enter the target state. - * - * If necessary, set the firmware waking vector and do arch-specific - * nastiness to get the wakeup code to the waking vector. - */ -static int __acpi_pm_prepare(void) -{ - int error = acpi_sleep_prepare(acpi_target_sleep_state); - - if (error) - acpi_target_sleep_state = ACPI_STATE_S0; - return error; -} - -/** - * acpi_pm_prepare - Prepare the platform to enter the target sleep - * state and disable the GPEs. - */ -static int acpi_pm_prepare(void) -{ - int error = __acpi_pm_prepare(); - - if (!error) - acpi_hw_disable_all_gpes(); - return error; -} - -/** - * acpi_pm_finish - Instruct the platform to leave a sleep state. - * - * This is called after we wake back up (or if entering the sleep state - * failed). - */ -static void acpi_pm_finish(void) -{ - u32 acpi_state = acpi_target_sleep_state; - - if (acpi_state == ACPI_STATE_S0) - return; - - printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n", - acpi_state); - acpi_disable_wakeup_device(acpi_state); - acpi_leave_sleep_state(acpi_state); - - /* reset firmware waking vector */ - acpi_set_firmware_waking_vector((acpi_physical_address) 0); - - acpi_target_sleep_state = ACPI_STATE_S0; -} - -/** - * acpi_pm_end - Finish up suspend sequence. - */ -static void acpi_pm_end(void) -{ - /* - * This is necessary in case acpi_pm_finish() is not called during a - * failing transition to a sleep state. - */ - acpi_target_sleep_state = ACPI_STATE_S0; - acpi_sleep_tts_switch(acpi_target_sleep_state); -} -#else /* !CONFIG_ACPI_SLEEP */ -#define acpi_target_sleep_state ACPI_STATE_S0 -#endif /* CONFIG_ACPI_SLEEP */ - -#ifdef CONFIG_SUSPEND -extern void do_suspend_lowlevel(void); - -static u32 acpi_suspend_states[] = { - [PM_SUSPEND_ON] = ACPI_STATE_S0, - [PM_SUSPEND_STANDBY] = ACPI_STATE_S1, - [PM_SUSPEND_MEM] = ACPI_STATE_S3, - [PM_SUSPEND_MAX] = ACPI_STATE_S5 -}; - -/** - * acpi_suspend_begin - Set the target system sleep state to the state - * associated with given @pm_state, if supported. - */ -static int acpi_suspend_begin(suspend_state_t pm_state) -{ - u32 acpi_state = acpi_suspend_states[pm_state]; - int error = 0; - - if (sleep_states[acpi_state]) { - acpi_target_sleep_state = acpi_state; - acpi_sleep_tts_switch(acpi_target_sleep_state); - } else { - printk(KERN_ERR "ACPI does not support this state: %d\n", - pm_state); - error = -ENOSYS; - } - return error; -} - -/** - * acpi_suspend_enter - Actually enter a sleep state. - * @pm_state: ignored - * - * Flush caches and go to sleep. For STR we have to call arch-specific - * assembly, which in turn call acpi_enter_sleep_state(). - * It's unfortunate, but it works. Please fix if you're feeling frisky. - */ -static int acpi_suspend_enter(suspend_state_t pm_state) -{ - acpi_status status = AE_OK; - unsigned long flags = 0; - u32 acpi_state = acpi_target_sleep_state; - - ACPI_FLUSH_CPU_CACHE(); - - /* Do arch specific saving of state. */ - if (acpi_state == ACPI_STATE_S3) { - int error = acpi_save_state_mem(); - - if (error) - return error; - } - - local_irq_save(flags); - acpi_enable_wakeup_device(acpi_state); - switch (acpi_state) { - case ACPI_STATE_S1: - barrier(); - status = acpi_enter_sleep_state(acpi_state); - break; - - case ACPI_STATE_S3: - do_suspend_lowlevel(); - break; - } - - /* If ACPI is not enabled by the BIOS, we need to enable it here. */ - if (set_sci_en_on_resume) - acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1); - else - acpi_enable(); - - /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(acpi_state); - - /* ACPI 3.0 specs (P62) says that it's the responsibility - * of the OSPM to clear the status bit [ implying that the - * POWER_BUTTON event should not reach userspace ] - */ - if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) - acpi_clear_event(ACPI_EVENT_POWER_BUTTON); - - /* - * Disable and clear GPE status before interrupt is enabled. Some GPEs - * (like wakeup GPE) haven't handler, this can avoid such GPE misfire. - * acpi_leave_sleep_state will reenable specific GPEs later - */ - acpi_hw_disable_all_gpes(); - - local_irq_restore(flags); - printk(KERN_DEBUG "Back to C!\n"); - - /* restore processor state */ - if (acpi_state == ACPI_STATE_S3) - acpi_restore_state_mem(); - - return ACPI_SUCCESS(status) ? 0 : -EFAULT; -} - -static int acpi_suspend_state_valid(suspend_state_t pm_state) -{ - u32 acpi_state; - - switch (pm_state) { - case PM_SUSPEND_ON: - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - acpi_state = acpi_suspend_states[pm_state]; - - return sleep_states[acpi_state]; - default: - return 0; - } -} - -static struct platform_suspend_ops acpi_suspend_ops = { - .valid = acpi_suspend_state_valid, - .begin = acpi_suspend_begin, - .prepare = acpi_pm_prepare, - .enter = acpi_suspend_enter, - .finish = acpi_pm_finish, - .end = acpi_pm_end, -}; - -/** - * acpi_suspend_begin_old - Set the target system sleep state to the - * state associated with given @pm_state, if supported, and - * execute the _PTS control method. This function is used if the - * pre-ACPI 2.0 suspend ordering has been requested. - */ -static int acpi_suspend_begin_old(suspend_state_t pm_state) -{ - int error = acpi_suspend_begin(pm_state); - - if (!error) - error = __acpi_pm_prepare(); - return error; -} - -/* - * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has - * been requested. - */ -static struct platform_suspend_ops acpi_suspend_ops_old = { - .valid = acpi_suspend_state_valid, - .begin = acpi_suspend_begin_old, - .prepare = acpi_pm_disable_gpes, - .enter = acpi_suspend_enter, - .finish = acpi_pm_finish, - .end = acpi_pm_end, - .recover = acpi_pm_finish, -}; - -static int __init init_old_suspend_ordering(const struct dmi_system_id *d) -{ - old_suspend_ordering = true; - return 0; -} - -static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d) -{ - set_sci_en_on_resume = true; - return 0; -} - -static struct dmi_system_id __initdata acpisleep_dmi_table[] = { - { - .callback = init_old_suspend_ordering, - .ident = "Abit KN9 (nForce4 variant)", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"), - DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"), - }, - }, - { - .callback = init_old_suspend_ordering, - .ident = "HP xw4600 Workstation", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Apple MacBook 1,1", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Apple MacMini 1,1", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"), - }, - }, - {}, -}; -#endif /* CONFIG_SUSPEND */ - -#ifdef CONFIG_HIBERNATION -static unsigned long s4_hardware_signature; -static struct acpi_table_facs *facs; -static bool nosigcheck; - -void __init acpi_no_s4_hw_signature(void) -{ - nosigcheck = true; -} - -static int acpi_hibernation_begin(void) -{ - acpi_target_sleep_state = ACPI_STATE_S4; - acpi_sleep_tts_switch(acpi_target_sleep_state); - return 0; -} - -static int acpi_hibernation_enter(void) -{ - acpi_status status = AE_OK; - unsigned long flags = 0; - - ACPI_FLUSH_CPU_CACHE(); - - local_irq_save(flags); - acpi_enable_wakeup_device(ACPI_STATE_S4); - /* This shouldn't return. If it returns, we have a problem */ - status = acpi_enter_sleep_state(ACPI_STATE_S4); - /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4); - local_irq_restore(flags); - - return ACPI_SUCCESS(status) ? 0 : -EFAULT; -} - -static void acpi_hibernation_leave(void) -{ - /* - * If ACPI is not enabled by the BIOS and the boot kernel, we need to - * enable it here. - */ - acpi_enable(); - /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4); - /* Check the hardware signature */ - if (facs && s4_hardware_signature != facs->hardware_signature) { - printk(KERN_EMERG "ACPI: Hardware changed while hibernated, " - "cannot resume!\n"); - panic("ACPI S4 hardware signature mismatch"); - } -} - -static void acpi_pm_enable_gpes(void) -{ - acpi_hw_enable_all_runtime_gpes(); -} - -static struct platform_hibernation_ops acpi_hibernation_ops = { - .begin = acpi_hibernation_begin, - .end = acpi_pm_end, - .pre_snapshot = acpi_pm_prepare, - .finish = acpi_pm_finish, - .prepare = acpi_pm_prepare, - .enter = acpi_hibernation_enter, - .leave = acpi_hibernation_leave, - .pre_restore = acpi_pm_disable_gpes, - .restore_cleanup = acpi_pm_enable_gpes, -}; - -/** - * acpi_hibernation_begin_old - Set the target system sleep state to - * ACPI_STATE_S4 and execute the _PTS control method. This - * function is used if the pre-ACPI 2.0 suspend ordering has been - * requested. - */ -static int acpi_hibernation_begin_old(void) -{ - int error; - /* - * The _TTS object should always be evaluated before the _PTS object. - * When the old_suspended_ordering is true, the _PTS object is - * evaluated in the acpi_sleep_prepare. - */ - acpi_sleep_tts_switch(ACPI_STATE_S4); - - error = acpi_sleep_prepare(ACPI_STATE_S4); - - if (!error) - acpi_target_sleep_state = ACPI_STATE_S4; - return error; -} - -/* - * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has - * been requested. - */ -static struct platform_hibernation_ops acpi_hibernation_ops_old = { - .begin = acpi_hibernation_begin_old, - .end = acpi_pm_end, - .pre_snapshot = acpi_pm_disable_gpes, - .finish = acpi_pm_finish, - .prepare = acpi_pm_disable_gpes, - .enter = acpi_hibernation_enter, - .leave = acpi_hibernation_leave, - .pre_restore = acpi_pm_disable_gpes, - .restore_cleanup = acpi_pm_enable_gpes, - .recover = acpi_pm_finish, -}; -#endif /* CONFIG_HIBERNATION */ - -int acpi_suspend(u32 acpi_state) -{ - suspend_state_t states[] = { - [1] = PM_SUSPEND_STANDBY, - [3] = PM_SUSPEND_MEM, - [5] = PM_SUSPEND_MAX - }; - - if (acpi_state < 6 && states[acpi_state]) - return pm_suspend(states[acpi_state]); - if (acpi_state == 4) - return hibernate(); - return -EINVAL; -} - -#ifdef CONFIG_PM_SLEEP -/** - * acpi_pm_device_sleep_state - return preferred power state of ACPI device - * in the system sleep state given by %acpi_target_sleep_state - * @dev: device to examine; its driver model wakeup flags control - * whether it should be able to wake up the system - * @d_min_p: used to store the upper limit of allowed states range - * Return value: preferred power state of the device on success, -ENODEV on - * failure (ie. if there's no 'struct acpi_device' for @dev) - * - * Find the lowest power (highest number) ACPI device power state that - * device @dev can be in while the system is in the sleep state represented - * by %acpi_target_sleep_state. If @wake is nonzero, the device should be - * able to wake up the system from this sleep state. If @d_min_p is set, - * the highest power (lowest number) device power state of @dev allowed - * in this system sleep state is stored at the location pointed to by it. - * - * The caller must ensure that @dev is valid before using this function. - * The caller is also responsible for figuring out if the device is - * supposed to be able to wake up the system and passing this information - * via @wake. - */ - -int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) -{ - acpi_handle handle = DEVICE_ACPI_HANDLE(dev); - struct acpi_device *adev; - char acpi_method[] = "_SxD"; - unsigned long long d_min, d_max; - - if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { - printk(KERN_DEBUG "ACPI handle has no context!\n"); - return -ENODEV; - } - - acpi_method[2] = '0' + acpi_target_sleep_state; - /* - * If the sleep state is S0, we will return D3, but if the device has - * _S0W, we will use the value from _S0W - */ - d_min = ACPI_STATE_D0; - d_max = ACPI_STATE_D3; - - /* - * If present, _SxD methods return the minimum D-state (highest power - * state) we can use for the corresponding S-states. Otherwise, the - * minimum D-state is D0 (ACPI 3.x). - * - * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer - * provided -- that's our fault recovery, we ignore retval. - */ - if (acpi_target_sleep_state > ACPI_STATE_S0) - acpi_evaluate_integer(handle, acpi_method, NULL, &d_min); - - /* - * If _PRW says we can wake up the system from the target sleep state, - * the D-state returned by _SxD is sufficient for that (we assume a - * wakeup-aware driver if wake is set). Still, if _SxW exists - * (ACPI 3.x), it should return the maximum (lowest power) D-state that - * can wake the system. _S0W may be valid, too. - */ - if (acpi_target_sleep_state == ACPI_STATE_S0 || - (device_may_wakeup(dev) && adev->wakeup.state.enabled && - adev->wakeup.sleep_state <= acpi_target_sleep_state)) { - acpi_status status; - - acpi_method[3] = 'W'; - status = acpi_evaluate_integer(handle, acpi_method, NULL, - &d_max); - if (ACPI_FAILURE(status)) { - d_max = d_min; - } else if (d_max < d_min) { - /* Warn the user of the broken DSDT */ - printk(KERN_WARNING "ACPI: Wrong value from %s\n", - acpi_method); - /* Sanitize it */ - d_min = d_max; - } - } - - if (d_min_p) - *d_min_p = d_min; - return d_max; -} - -/** - * acpi_pm_device_sleep_wake - enable or disable the system wake-up - * capability of given device - * @dev: device to handle - * @enable: 'true' - enable, 'false' - disable the wake-up capability - */ -int acpi_pm_device_sleep_wake(struct device *dev, bool enable) -{ - acpi_handle handle; - struct acpi_device *adev; - - if (!device_may_wakeup(dev)) - return -EINVAL; - - handle = DEVICE_ACPI_HANDLE(dev); - if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { - printk(KERN_DEBUG "ACPI handle has no context!\n"); - return -ENODEV; - } - - return enable ? - acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) : - acpi_disable_wakeup_device_power(adev); -} -#endif - -static void acpi_power_off_prepare(void) -{ - /* Prepare to power off the system */ - acpi_sleep_prepare(ACPI_STATE_S5); - acpi_hw_disable_all_gpes(); -} - -static void acpi_power_off(void) -{ - /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ - printk("%s called\n", __func__); - local_irq_disable(); - acpi_enable_wakeup_device(ACPI_STATE_S5); - acpi_enter_sleep_state(ACPI_STATE_S5); -} - -int __init acpi_sleep_init(void) -{ - acpi_status status; - u8 type_a, type_b; -#ifdef CONFIG_SUSPEND - int i = 0; - - dmi_check_system(acpisleep_dmi_table); -#endif - - if (acpi_disabled) - return 0; - - sleep_states[ACPI_STATE_S0] = 1; - printk(KERN_INFO PREFIX "(supports S0"); - -#ifdef CONFIG_SUSPEND - for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) { - status = acpi_get_sleep_type_data(i, &type_a, &type_b); - if (ACPI_SUCCESS(status)) { - sleep_states[i] = 1; - printk(" S%d", i); - } - } - - suspend_set_ops(old_suspend_ordering ? - &acpi_suspend_ops_old : &acpi_suspend_ops); -#endif - -#ifdef CONFIG_HIBERNATION - status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b); - if (ACPI_SUCCESS(status)) { - hibernation_set_ops(old_suspend_ordering ? - &acpi_hibernation_ops_old : &acpi_hibernation_ops); - sleep_states[ACPI_STATE_S4] = 1; - printk(" S4"); - if (!nosigcheck) { - acpi_get_table_by_index(ACPI_TABLE_INDEX_FACS, - (struct acpi_table_header **)&facs); - if (facs) - s4_hardware_signature = - facs->hardware_signature; - } - } -#endif - status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b); - if (ACPI_SUCCESS(status)) { - sleep_states[ACPI_STATE_S5] = 1; - printk(" S5"); - pm_power_off_prepare = acpi_power_off_prepare; - pm_power_off = acpi_power_off; - } - printk(")\n"); - /* - * Register the tts_notifier to reboot notifier list so that the _TTS - * object can also be evaluated when the system enters S5. - */ - register_reboot_notifier(&tts_notifier); - return 0; -} diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c deleted file mode 100644 index 4dbc2271acf..00000000000 --- a/drivers/acpi/sleep/proc.c +++ /dev/null @@ -1,526 +0,0 @@ -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/suspend.h> -#include <linux/bcd.h> -#include <asm/uaccess.h> - -#include <acpi/acpi_bus.h> -#include <acpi/acpi_drivers.h> - -#ifdef CONFIG_X86 -#include <linux/mc146818rtc.h> -#endif - -#include "sleep.h" - -#define _COMPONENT ACPI_SYSTEM_COMPONENT - -/* - * this file provides support for: - * /proc/acpi/sleep - * /proc/acpi/alarm - * /proc/acpi/wakeup - */ - -ACPI_MODULE_NAME("sleep") -#ifdef CONFIG_ACPI_PROCFS -static int acpi_system_sleep_seq_show(struct seq_file *seq, void *offset) -{ - int i; - - ACPI_FUNCTION_TRACE("acpi_system_sleep_seq_show"); - - for (i = 0; i <= ACPI_STATE_S5; i++) { - if (sleep_states[i]) { - seq_printf(seq, "S%d ", i); - } - } - - seq_puts(seq, "\n"); - - return 0; -} - -static int acpi_system_sleep_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_system_sleep_seq_show, PDE(inode)->data); -} - -static ssize_t -acpi_system_write_sleep(struct file *file, - const char __user * buffer, size_t count, loff_t * ppos) -{ - char str[12]; - u32 state = 0; - int error = 0; - - if (count > sizeof(str) - 1) - goto Done; - memset(str, 0, sizeof(str)); - if (copy_from_user(str, buffer, count)) - return -EFAULT; - - /* Check for S4 bios request */ - if (!strcmp(str, "4b")) { - error = acpi_suspend(4); - goto Done; - } - state = simple_strtoul(str, NULL, 0); -#ifdef CONFIG_HIBERNATION - if (state == 4) { - error = hibernate(); - goto Done; - } -#endif - error = acpi_suspend(state); - Done: - return error ? error : count; -} -#endif /* CONFIG_ACPI_PROCFS */ - -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || !defined(CONFIG_X86) -/* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */ -#else -#define HAVE_ACPI_LEGACY_ALARM -#endif - -#ifdef HAVE_ACPI_LEGACY_ALARM - -static int acpi_system_alarm_seq_show(struct seq_file *seq, void *offset) -{ - u32 sec, min, hr; - u32 day, mo, yr, cent = 0; - unsigned char rtc_control = 0; - unsigned long flags; - - ACPI_FUNCTION_TRACE("acpi_system_alarm_seq_show"); - - spin_lock_irqsave(&rtc_lock, flags); - - sec = CMOS_READ(RTC_SECONDS_ALARM); - min = CMOS_READ(RTC_MINUTES_ALARM); - hr = CMOS_READ(RTC_HOURS_ALARM); - rtc_control = CMOS_READ(RTC_CONTROL); - - /* If we ever get an FACP with proper values... */ - if (acpi_gbl_FADT.day_alarm) - /* ACPI spec: only low 6 its should be cared */ - day = CMOS_READ(acpi_gbl_FADT.day_alarm) & 0x3F; - else - day = CMOS_READ(RTC_DAY_OF_MONTH); - if (acpi_gbl_FADT.month_alarm) - mo = CMOS_READ(acpi_gbl_FADT.month_alarm); - else - mo = CMOS_READ(RTC_MONTH); - if (acpi_gbl_FADT.century) - cent = CMOS_READ(acpi_gbl_FADT.century); - - yr = CMOS_READ(RTC_YEAR); - - spin_unlock_irqrestore(&rtc_lock, flags); - - if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - sec = bcd2bin(sec); - min = bcd2bin(min); - hr = bcd2bin(hr); - day = bcd2bin(day); - mo = bcd2bin(mo); - yr = bcd2bin(yr); - cent = bcd2bin(cent); - } - - /* we're trusting the FADT (see above) */ - if (!acpi_gbl_FADT.century) - /* If we're not trusting the FADT, we should at least make it - * right for _this_ century... ehm, what is _this_ century? - * - * TBD: - * ASAP: find piece of code in the kernel, e.g. star tracker driver, - * which we can trust to determine the century correctly. Atom - * watch driver would be nice, too... - * - * if that has not happened, change for first release in 2050: - * if (yr<50) - * yr += 2100; - * else - * yr += 2000; // current line of code - * - * if that has not happened either, please do on 2099/12/31:23:59:59 - * s/2000/2100 - * - */ - yr += 2000; - else - yr += cent * 100; - - seq_printf(seq, "%4.4u-", yr); - (mo > 12) ? seq_puts(seq, "**-") : seq_printf(seq, "%2.2u-", mo); - (day > 31) ? seq_puts(seq, "** ") : seq_printf(seq, "%2.2u ", day); - (hr > 23) ? seq_puts(seq, "**:") : seq_printf(seq, "%2.2u:", hr); - (min > 59) ? seq_puts(seq, "**:") : seq_printf(seq, "%2.2u:", min); - (sec > 59) ? seq_puts(seq, "**\n") : seq_printf(seq, "%2.2u\n", sec); - - return 0; -} - -static int acpi_system_alarm_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_system_alarm_seq_show, PDE(inode)->data); -} - -static int get_date_field(char **p, u32 * value) -{ - char *next = NULL; - char *string_end = NULL; - int result = -EINVAL; - - /* - * Try to find delimeter, only to insert null. The end of the - * string won't have one, but is still valid. - */ - if (*p == NULL) - return result; - - next = strpbrk(*p, "- :"); - if (next) - *next++ = '\0'; - - *value = simple_strtoul(*p, &string_end, 10); - - /* Signal success if we got a good digit */ - if (string_end != *p) - result = 0; - - if (next) - *p = next; - else - *p = NULL; - - return result; -} - -/* Read a possibly BCD register, always return binary */ -static u32 cmos_bcd_read(int offset, int rtc_control) -{ - u32 val = CMOS_READ(offset); - if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - val = bcd2bin(val); - return val; -} - -/* Write binary value into possibly BCD register */ -static void cmos_bcd_write(u32 val, int offset, int rtc_control) -{ - if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - val = bin2bcd(val); - CMOS_WRITE(val, offset); -} - -static ssize_t -acpi_system_write_alarm(struct file *file, - const char __user * buffer, size_t count, loff_t * ppos) -{ - int result = 0; - char alarm_string[30] = { '\0' }; - char *p = alarm_string; - u32 sec, min, hr, day, mo, yr; - int adjust = 0; - unsigned char rtc_control = 0; - - ACPI_FUNCTION_TRACE("acpi_system_write_alarm"); - - if (count > sizeof(alarm_string) - 1) - return_VALUE(-EINVAL); - - if (copy_from_user(alarm_string, buffer, count)) - return_VALUE(-EFAULT); - - alarm_string[count] = '\0'; - - /* check for time adjustment */ - if (alarm_string[0] == '+') { - p++; - adjust = 1; - } - - if ((result = get_date_field(&p, &yr))) - goto end; - if ((result = get_date_field(&p, &mo))) - goto end; - if ((result = get_date_field(&p, &day))) - goto end; - if ((result = get_date_field(&p, &hr))) - goto end; - if ((result = get_date_field(&p, &min))) - goto end; - if ((result = get_date_field(&p, &sec))) - goto end; - - spin_lock_irq(&rtc_lock); - - rtc_control = CMOS_READ(RTC_CONTROL); - - if (adjust) { - yr += cmos_bcd_read(RTC_YEAR, rtc_control); - mo += cmos_bcd_read(RTC_MONTH, rtc_control); - day += cmos_bcd_read(RTC_DAY_OF_MONTH, rtc_control); - hr += cmos_bcd_read(RTC_HOURS, rtc_control); - min += cmos_bcd_read(RTC_MINUTES, rtc_control); - sec += cmos_bcd_read(RTC_SECONDS, rtc_control); - } - - spin_unlock_irq(&rtc_lock); - - if (sec > 59) { - min += sec/60; - sec = sec%60; - } - if (min > 59) { - hr += min/60; - min = min%60; - } - if (hr > 23) { - day += hr/24; - hr = hr%24; - } - if (day > 31) { - mo += day/32; - day = day%32; - } - if (mo > 12) { - yr += mo/13; - mo = mo%13; - } - - spin_lock_irq(&rtc_lock); - /* - * Disable alarm interrupt before setting alarm timer or else - * when ACPI_EVENT_RTC is enabled, a spurious ACPI interrupt occurs - */ - rtc_control &= ~RTC_AIE; - CMOS_WRITE(rtc_control, RTC_CONTROL); - CMOS_READ(RTC_INTR_FLAGS); - - /* write the fields the rtc knows about */ - cmos_bcd_write(hr, RTC_HOURS_ALARM, rtc_control); - cmos_bcd_write(min, RTC_MINUTES_ALARM, rtc_control); - cmos_bcd_write(sec, RTC_SECONDS_ALARM, rtc_control); - - /* - * If the system supports an enhanced alarm it will have non-zero - * offsets into the CMOS RAM here -- which for some reason are pointing - * to the RTC area of memory. - */ - if (acpi_gbl_FADT.day_alarm) - cmos_bcd_write(day, acpi_gbl_FADT.day_alarm, rtc_control); - if (acpi_gbl_FADT.month_alarm) - cmos_bcd_write(mo, acpi_gbl_FADT.month_alarm, rtc_control); - if (acpi_gbl_FADT.century) { - if (adjust) - yr += cmos_bcd_read(acpi_gbl_FADT.century, rtc_control) * 100; - cmos_bcd_write(yr / 100, acpi_gbl_FADT.century, rtc_control); - } - /* enable the rtc alarm interrupt */ - rtc_control |= RTC_AIE; - CMOS_WRITE(rtc_control, RTC_CONTROL); - CMOS_READ(RTC_INTR_FLAGS); - - spin_unlock_irq(&rtc_lock); - - acpi_clear_event(ACPI_EVENT_RTC); - acpi_enable_event(ACPI_EVENT_RTC, 0); - - *ppos += count; - - result = 0; - end: - return_VALUE(result ? result : count); -} -#endif /* HAVE_ACPI_LEGACY_ALARM */ - -extern struct list_head acpi_wakeup_device_list; -extern spinlock_t acpi_device_lock; - -static int -acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) -{ - struct list_head *node, *next; - - seq_printf(seq, "Device\tS-state\t Status Sysfs node\n"); - - spin_lock(&acpi_device_lock); - list_for_each_safe(node, next, &acpi_wakeup_device_list) { - struct acpi_device *dev = - container_of(node, struct acpi_device, wakeup_list); - struct device *ldev; - - if (!dev->wakeup.flags.valid) - continue; - spin_unlock(&acpi_device_lock); - - ldev = acpi_get_physical_device(dev->handle); - seq_printf(seq, "%s\t S%d\t%c%-8s ", - dev->pnp.bus_id, - (u32) dev->wakeup.sleep_state, - dev->wakeup.flags.run_wake ? '*' : ' ', - dev->wakeup.state.enabled ? "enabled" : "disabled"); - if (ldev) - seq_printf(seq, "%s:%s", - ldev->bus ? ldev->bus->name : "no-bus", - dev_name(ldev)); - seq_printf(seq, "\n"); - put_device(ldev); - - spin_lock(&acpi_device_lock); - } - spin_unlock(&acpi_device_lock); - return 0; -} - -static void physical_device_enable_wakeup(struct acpi_device *adev) -{ - struct device *dev = acpi_get_physical_device(adev->handle); - - if (dev && device_can_wakeup(dev)) - device_set_wakeup_enable(dev, adev->wakeup.state.enabled); -} - -static ssize_t -acpi_system_write_wakeup_device(struct file *file, - const char __user * buffer, - size_t count, loff_t * ppos) -{ - struct list_head *node, *next; - char strbuf[5]; - char str[5] = ""; - int len = count; - struct acpi_device *found_dev = NULL; - - if (len > 4) - len = 4; - - if (copy_from_user(strbuf, buffer, len)) - return -EFAULT; - strbuf[len] = '\0'; - sscanf(strbuf, "%s", str); - - spin_lock(&acpi_device_lock); - list_for_each_safe(node, next, &acpi_wakeup_device_list) { - struct acpi_device *dev = - container_of(node, struct acpi_device, wakeup_list); - if (!dev->wakeup.flags.valid) - continue; - - if (!strncmp(dev->pnp.bus_id, str, 4)) { - dev->wakeup.state.enabled = - dev->wakeup.state.enabled ? 0 : 1; - found_dev = dev; - break; - } - } - if (found_dev) { - physical_device_enable_wakeup(found_dev); - list_for_each_safe(node, next, &acpi_wakeup_device_list) { - struct acpi_device *dev = container_of(node, - struct - acpi_device, - wakeup_list); - - if ((dev != found_dev) && - (dev->wakeup.gpe_number == - found_dev->wakeup.gpe_number) - && (dev->wakeup.gpe_device == - found_dev->wakeup.gpe_device)) { - printk(KERN_WARNING - "ACPI: '%s' and '%s' have the same GPE, " - "can't disable/enable one seperately\n", - dev->pnp.bus_id, found_dev->pnp.bus_id); - dev->wakeup.state.enabled = - found_dev->wakeup.state.enabled; - physical_device_enable_wakeup(dev); - } - } - } - spin_unlock(&acpi_device_lock); - return count; -} - -static int -acpi_system_wakeup_device_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_system_wakeup_device_seq_show, - PDE(inode)->data); -} - -static const struct file_operations acpi_system_wakeup_device_fops = { - .owner = THIS_MODULE, - .open = acpi_system_wakeup_device_open_fs, - .read = seq_read, - .write = acpi_system_write_wakeup_device, - .llseek = seq_lseek, - .release = single_release, -}; - -#ifdef CONFIG_ACPI_PROCFS -static const struct file_operations acpi_system_sleep_fops = { - .owner = THIS_MODULE, - .open = acpi_system_sleep_open_fs, - .read = seq_read, - .write = acpi_system_write_sleep, - .llseek = seq_lseek, - .release = single_release, -}; -#endif /* CONFIG_ACPI_PROCFS */ - -#ifdef HAVE_ACPI_LEGACY_ALARM -static const struct file_operations acpi_system_alarm_fops = { - .owner = THIS_MODULE, - .open = acpi_system_alarm_open_fs, - .read = seq_read, - .write = acpi_system_write_alarm, - .llseek = seq_lseek, - .release = single_release, -}; - -static u32 rtc_handler(void *context) -{ - acpi_clear_event(ACPI_EVENT_RTC); - acpi_disable_event(ACPI_EVENT_RTC, 0); - - return ACPI_INTERRUPT_HANDLED; -} -#endif /* HAVE_ACPI_LEGACY_ALARM */ - -static int __init acpi_sleep_proc_init(void) -{ - if (acpi_disabled) - return 0; - -#ifdef CONFIG_ACPI_PROCFS - /* 'sleep' [R/W] */ - proc_create("sleep", S_IFREG | S_IRUGO | S_IWUSR, - acpi_root_dir, &acpi_system_sleep_fops); -#endif /* CONFIG_ACPI_PROCFS */ - -#ifdef HAVE_ACPI_LEGACY_ALARM - /* 'alarm' [R/W] */ - proc_create("alarm", S_IFREG | S_IRUGO | S_IWUSR, - acpi_root_dir, &acpi_system_alarm_fops); - - acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL); - /* - * Disable the RTC event after installing RTC handler. - * Only when RTC alarm is set will it be enabled. - */ - acpi_clear_event(ACPI_EVENT_RTC); - acpi_disable_event(ACPI_EVENT_RTC, 0); -#endif /* HAVE_ACPI_LEGACY_ALARM */ - - /* 'wakeup device' [R/W] */ - proc_create("wakeup", S_IFREG | S_IRUGO | S_IWUSR, - acpi_root_dir, &acpi_system_wakeup_device_fops); - - return 0; -} - -late_initcall(acpi_sleep_proc_init); diff --git a/drivers/acpi/sleep/sleep.h b/drivers/acpi/sleep/sleep.h deleted file mode 100644 index cfaf8f5b0a1..00000000000 --- a/drivers/acpi/sleep/sleep.h +++ /dev/null @@ -1,7 +0,0 @@ - -extern u8 sleep_states[]; -extern int acpi_suspend (u32 state); - -extern void acpi_enable_wakeup_device_prep(u8 sleep_state); -extern void acpi_enable_wakeup_device(u8 sleep_state); -extern void acpi_disable_wakeup_device(u8 sleep_state); diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c deleted file mode 100644 index dea4c23df76..00000000000 --- a/drivers/acpi/sleep/wakeup.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * wakeup.c - support wakeup devices - * Copyright (C) 2004 Li Shaohua <shaohua.li@intel.com> - */ - -#include <linux/init.h> -#include <linux/acpi.h> -#include <acpi/acpi_drivers.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <acpi/acevents.h> -#include "sleep.h" - -#define _COMPONENT ACPI_SYSTEM_COMPONENT -ACPI_MODULE_NAME("wakeup_devices") - -extern struct list_head acpi_wakeup_device_list; -extern spinlock_t acpi_device_lock; - -/** - * acpi_enable_wakeup_device_prep - prepare wakeup devices - * @sleep_state: ACPI state - * Enable all wakup devices power if the devices' wakeup level - * is higher than requested sleep level - */ - -void acpi_enable_wakeup_device_prep(u8 sleep_state) -{ - struct list_head *node, *next; - - ACPI_FUNCTION_TRACE("acpi_enable_wakeup_device_prep"); - - spin_lock(&acpi_device_lock); - list_for_each_safe(node, next, &acpi_wakeup_device_list) { - struct acpi_device *dev = container_of(node, - struct acpi_device, - wakeup_list); - - if (!dev->wakeup.flags.valid || - !dev->wakeup.state.enabled || - (sleep_state > (u32) dev->wakeup.sleep_state)) - continue; - - spin_unlock(&acpi_device_lock); - acpi_enable_wakeup_device_power(dev, sleep_state); - spin_lock(&acpi_device_lock); - } - spin_unlock(&acpi_device_lock); -} - -/** - * acpi_enable_wakeup_device - enable wakeup devices - * @sleep_state: ACPI state - * Enable all wakup devices's GPE - */ -void acpi_enable_wakeup_device(u8 sleep_state) -{ - struct list_head *node, *next; - - /* - * Caution: this routine must be invoked when interrupt is disabled - * Refer ACPI2.0: P212 - */ - ACPI_FUNCTION_TRACE("acpi_enable_wakeup_device"); - spin_lock(&acpi_device_lock); - list_for_each_safe(node, next, &acpi_wakeup_device_list) { - struct acpi_device *dev = - container_of(node, struct acpi_device, wakeup_list); - - if (!dev->wakeup.flags.valid) - continue; - - /* If users want to disable run-wake GPE, - * we only disable it for wake and leave it for runtime - */ - if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared) - || sleep_state > (u32) dev->wakeup.sleep_state) { - if (dev->wakeup.flags.run_wake) { - spin_unlock(&acpi_device_lock); - /* set_gpe_type will disable GPE, leave it like that */ - acpi_set_gpe_type(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, - ACPI_GPE_TYPE_RUNTIME); - spin_lock(&acpi_device_lock); - } - continue; - } - spin_unlock(&acpi_device_lock); - if (!dev->wakeup.flags.run_wake) - acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number); - spin_lock(&acpi_device_lock); - } - spin_unlock(&acpi_device_lock); -} - -/** - * acpi_disable_wakeup_device - disable devices' wakeup capability - * @sleep_state: ACPI state - * Disable all wakup devices's GPE and wakeup capability - */ -void acpi_disable_wakeup_device(u8 sleep_state) -{ - struct list_head *node, *next; - - ACPI_FUNCTION_TRACE("acpi_disable_wakeup_device"); - - spin_lock(&acpi_device_lock); - list_for_each_safe(node, next, &acpi_wakeup_device_list) { - struct acpi_device *dev = - container_of(node, struct acpi_device, wakeup_list); - - if (!dev->wakeup.flags.valid) - continue; - - if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared) - || sleep_state > (u32) dev->wakeup.sleep_state) { - if (dev->wakeup.flags.run_wake) { - spin_unlock(&acpi_device_lock); - acpi_set_gpe_type(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, - ACPI_GPE_TYPE_WAKE_RUN); - /* Re-enable it, since set_gpe_type will disable it */ - acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number); - spin_lock(&acpi_device_lock); - } - continue; - } - - spin_unlock(&acpi_device_lock); - acpi_disable_wakeup_device_power(dev); - /* Never disable run-wake GPE */ - if (!dev->wakeup.flags.run_wake) { - acpi_disable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number); - acpi_clear_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); - } - spin_lock(&acpi_device_lock); - } - spin_unlock(&acpi_device_lock); -} - -static int __init acpi_wakeup_device_init(void) -{ - struct list_head *node, *next; - - if (acpi_disabled) - return 0; - - spin_lock(&acpi_device_lock); - list_for_each_safe(node, next, &acpi_wakeup_device_list) { - struct acpi_device *dev = container_of(node, - struct acpi_device, - wakeup_list); - /* In case user doesn't load button driver */ - if (!dev->wakeup.flags.run_wake || dev->wakeup.state.enabled) - continue; - spin_unlock(&acpi_device_lock); - acpi_set_gpe_type(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, - ACPI_GPE_TYPE_WAKE_RUN); - acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number); - dev->wakeup.state.enabled = 1; - spin_lock(&acpi_device_lock); - } - spin_unlock(&acpi_device_lock); - return 0; -} - -late_initcall(acpi_wakeup_device_init); |