diff options
Diffstat (limited to 'drivers/ata/ahci.c')
| -rw-r--r-- | drivers/ata/ahci.c | 46 |
1 files changed, 33 insertions, 13 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index c729e6988bb..aeadd00411a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -267,8 +267,8 @@ struct ahci_port_priv { * per PM slot */ }; -static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val); -static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val); +static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); +static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc); @@ -316,6 +316,7 @@ static struct device_attribute *ahci_shost_attrs[] = { static struct device_attribute *ahci_sdev_attrs[] = { &dev_attr_sw_activity, + &dev_attr_unload_heads, NULL }; @@ -420,7 +421,7 @@ static const struct ata_port_info ahci_port_info[] = { /* board_ahci_mv */ { AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI | - AHCI_HFLAG_MV_PATA), + AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP), .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, .pio_mask = 0x1f, /* pio0-4 */ @@ -487,7 +488,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */ { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */ { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */ { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, @@ -610,6 +613,15 @@ module_param(ahci_em_messages, int, 0444); MODULE_PARM_DESC(ahci_em_messages, "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED"); +#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE) +static int marvell_enable; +#else +static int marvell_enable = 1; +#endif +module_param(marvell_enable, int, 0644); +MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)"); + + static inline int ahci_nr_ports(u32 cap) { return (cap & 0x1f) + 1; @@ -732,6 +744,8 @@ static void ahci_save_initial_config(struct pci_dev *pdev, "MV_AHCI HACK: port_map %x -> %x\n", port_map, port_map & mv); + dev_printk(KERN_ERR, &pdev->dev, + "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n"); port_map &= mv; } @@ -807,10 +821,10 @@ static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg) return 0; } -static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val) +static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) { - void __iomem *port_mmio = ahci_port_base(ap); - int offset = ahci_scr_offset(ap, sc_reg); + void __iomem *port_mmio = ahci_port_base(link->ap); + int offset = ahci_scr_offset(link->ap, sc_reg); if (offset) { *val = readl(port_mmio + offset); @@ -819,10 +833,10 @@ static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val) return -EINVAL; } -static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val) +static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) { - void __iomem *port_mmio = ahci_port_base(ap); - int offset = ahci_scr_offset(ap, sc_reg); + void __iomem *port_mmio = ahci_port_base(link->ap); + int offset = ahci_scr_offset(link->ap, sc_reg); if (offset) { writel(val, port_mmio + offset); @@ -960,7 +974,7 @@ static void ahci_disable_alpm(struct ata_port *ap) writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT); /* go ahead and clean out PhyRdy Change from Serror too */ - ahci_scr_write(ap, SCR_ERROR, ((1 << 16) | (1 << 18))); + ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18))); /* * Clear flag to indicate that we should ignore all PhyRdy @@ -1924,8 +1938,8 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat); /* AHCI needs SError cleared; otherwise, it might lock up */ - ahci_scr_read(ap, SCR_ERROR, &serror); - ahci_scr_write(ap, SCR_ERROR, serror); + ahci_scr_read(&ap->link, SCR_ERROR, &serror); + ahci_scr_write(&ap->link, SCR_ERROR, serror); host_ehi->serror |= serror; /* some controllers set IRQ_IF_ERR on device errors, ignore it */ @@ -2014,7 +2028,7 @@ static void ahci_port_intr(struct ata_port *ap) if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) && (status & PORT_IRQ_PHYRDY)) { status &= ~PORT_IRQ_PHYRDY; - ahci_scr_write(ap, SCR_ERROR, ((1 << 16) | (1 << 18))); + ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18))); } if (unlikely(status & PORT_IRQ_ERROR)) { @@ -2533,6 +2547,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + /* The AHCI driver can only drive the SATA ports, the PATA driver + can drive them all so if both drivers are selected make sure + AHCI stays out of the way */ + if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable) + return -ENODEV; + /* acquire resources */ rc = pcim_enable_device(pdev); if (rc) |