aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata/libata-core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/libata-core.c')
-rw-r--r--drivers/ata/libata-core.c46
1 files changed, 19 insertions, 27 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 8ee56e5cfb0..bdd8778e525 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2219,6 +2219,25 @@ int ata_bus_probe(struct ata_port *ap)
tries[dev->devno] = ATA_PROBE_MAX_TRIES;
retry:
+ ata_link_for_each_dev(dev, &ap->link) {
+ /* If we issue an SRST then an ATA drive (not ATAPI)
+ * may change configuration and be in PIO0 timing. If
+ * we do a hard reset (or are coming from power on)
+ * this is true for ATA or ATAPI. Until we've set a
+ * suitable controller mode we should not touch the
+ * bus as we may be talking too fast.
+ */
+ dev->pio_mode = XFER_PIO_0;
+
+ /* If the controller has a pio mode setup function
+ * then use it to set the chipset to rights. Don't
+ * touch the DMA setup as that will be dealt with when
+ * configuring devices.
+ */
+ if (ap->ops->set_piomode)
+ ap->ops->set_piomode(ap, dev);
+ }
+
/* reset and determine device classes */
ap->ops->phy_reset(ap);
@@ -2234,12 +2253,6 @@ int ata_bus_probe(struct ata_port *ap)
ata_port_probe(ap);
- /* after the reset the device state is PIO 0 and the controller
- state is undefined. Record the mode */
-
- ata_link_for_each_dev(dev, &ap->link)
- dev->pio_mode = XFER_PIO_0;
-
/* read IDENTIFY page and configure devices. We have to do the identify
specific sequence bass-ackwards so that PDIAG- is released by
the slave device */
@@ -3272,8 +3285,6 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
unsigned long deadline)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- struct ata_device *dev;
- int i = 0;
DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
@@ -3284,25 +3295,6 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
udelay(20); /* FIXME: flush */
iowrite8(ap->ctl, ioaddr->ctl_addr);
- /* If we issued an SRST then an ATA drive (not ATAPI)
- * may have changed configuration and be in PIO0 timing. If
- * we did a hard reset (or are coming from power on) this is
- * true for ATA or ATAPI. Until we've set a suitable controller
- * mode we should not touch the bus as we may be talking too fast.
- */
-
- ata_link_for_each_dev(dev, &ap->link)
- dev->pio_mode = XFER_PIO_0;
-
- /* If the controller has a pio mode setup function then use
- it to set the chipset to rights. Don't touch the DMA setup
- as that will be dealt with when revalidating */
- if (ap->ops->set_piomode) {
- ata_link_for_each_dev(dev, &ap->link)
- if (devmask & (1 << i++))
- ap->ops->set_piomode(ap, dev);
- }
-
/* wait a while before checking status */
ata_wait_after_reset(ap, deadline);