1 files changed, 344 insertions, 0 deletions
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
new file mode 100644
index 00000000000..53070f6b1fc
--- /dev/null
+++ b/drivers/ata/pata_cs5536.c
@@ -0,0 +1,344 @@
+/*
+ * pata_cs5536.c	- CS5536 PATA for new ATA layer
+ *			  (C) 2007 Martin K. Petersen <mkp@mkp.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307	 USA
+ *
+ * Documentation:
+ *	Available from AMD web site.
+ *
+ * The IDE timing registers for the CS5536 live in the Geode Machine
+ * Specific Register file and not PCI config space.  Most BIOSes
+ * virtualize the PCI registers so the chip looks like a standard IDE
+ * controller.	Unfortunately not all implementations get this right.
+ * In particular some have problems with unaligned accesses to the
+ * virtualized PCI registers.  This driver always does full dword
+ * writes to work around the issue.  Also, in case of a bad BIOS this
+ * driver can be loaded with the "msr=1" parameter which forces using
+ * the Machine Specific Registers to configure the device.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/libata.h>
+#include <scsi/scsi_host.h>
+#include <asm/msr.h>
+
+#define DRV_NAME	"pata_cs5536"
+#define DRV_VERSION	"0.0.5"
+
+enum {
+	CFG			= 0,
+	DTC			= 1,
+	CAST			= 2,
+	ETC			= 3,
+
+	MSR_IDE_BASE		= 0x51300000,
+	MSR_IDE_CFG		= (MSR_IDE_BASE + 0x10),
+	MSR_IDE_DTC		= (MSR_IDE_BASE + 0x12),
+	MSR_IDE_CAST		= (MSR_IDE_BASE + 0x13),
+	MSR_IDE_ETC		= (MSR_IDE_BASE + 0x14),
+
+	PCI_IDE_CFG		= 0x40,
+	PCI_IDE_DTC		= 0x48,
+	PCI_IDE_CAST		= 0x4c,
+	PCI_IDE_ETC		= 0x50,
+
+	IDE_CFG_CHANEN		= 0x2,
+	IDE_CFG_CABLE		= 0x10000,
+
+	IDE_D0_SHIFT		= 24,
+	IDE_D1_SHIFT		= 16,
+	IDE_DRV_MASK		= 0xff,
+
+	IDE_CAST_D0_SHIFT	= 6,
+	IDE_CAST_D1_SHIFT	= 4,
+	IDE_CAST_DRV_MASK	= 0x3,
+	IDE_CAST_CMD_MASK	= 0xff,
+	IDE_CAST_CMD_SHIFT	= 24,
+
+	IDE_ETC_NODMA		= 0x03,
+};
+
+static int use_msr;
+
+static const u32 msr_reg[4] = {
+	MSR_IDE_CFG, MSR_IDE_DTC, MSR_IDE_CAST, MSR_IDE_ETC,
+};
+
+static const u8 pci_reg[4] = {
+	PCI_IDE_CFG, PCI_IDE_DTC, PCI_IDE_CAST, PCI_IDE_ETC,
+};
+
+static inline int cs5536_read(struct pci_dev *pdev, int reg, int *val)
+{
+	if (unlikely(use_msr)) {
+		u32 dummy;
+
+		rdmsr(msr_reg[reg], *val, dummy);
+		return 0;
+	}
+
+	return pci_read_config_dword(pdev, pci_reg[reg], val);
+}
+
+static inline int cs5536_write(struct pci_dev *pdev, int reg, int val)
+{
+	if (unlikely(use_msr)) {
+		wrmsr(msr_reg[reg], val, 0);
+		return 0;
+	}
+
+	return pci_write_config_dword(pdev, pci_reg[reg], val);
+}
+
+/**
+ *	cs5536_cable_detect	-	detect cable type
+ *	@ap: Port to detect on
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Perform cable detection for ATA66 capable cable. Return a libata
+ *	cable type.
+ */
+
+static int cs5536_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u32 cfg;
+
+	cs5536_read(pdev, CFG, &cfg);
+
+	if (cfg & (IDE_CFG_CABLE << ap->port_no))
+		return ATA_CBL_PATA80;
+	else
+		return ATA_CBL_PATA40;
+}
+
+/**
+ *	cs5536_set_piomode		-	PIO setup
+ *	@ap: ATA interface
+ *	@adev: device on the interface
+ */
+
+static void cs5536_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	static const u8 drv_timings[5] = {
+		0x98, 0x55, 0x32, 0x21, 0x20,
+	};
+
+	static const u8 addr_timings[5] = {
+		0x2, 0x1, 0x0, 0x0, 0x0,
+	};
+
+	static const u8 cmd_timings[5] = {
+		0x99, 0x92, 0x90, 0x22, 0x20,
+	};
+
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct ata_device *pair = ata_dev_pair(adev);
+	int mode = adev->pio_mode - XFER_PIO_0;
+	int cmdmode = mode;
+	int dshift = ap->port_no ? IDE_D1_SHIFT : IDE_D0_SHIFT;
+	int cshift = ap->port_no ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
+	u32 dtc, cast, etc;
+
+	if (pair)
+		cmdmode = min(mode, pair->pio_mode - XFER_PIO_0);
+
+	cs5536_read(pdev, DTC, &dtc);
+	cs5536_read(pdev, CAST, &cast);
+	cs5536_read(pdev, ETC, &etc);
+
+	dtc &= ~(IDE_DRV_MASK << dshift);
+	dtc |= drv_timings[mode] << dshift;
+
+	cast &= ~(IDE_CAST_DRV_MASK << cshift);
+	cast |= addr_timings[mode] << cshift;
+
+	cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
+	cast |= cmd_timings[cmdmode] << IDE_CAST_CMD_SHIFT;
+
+	etc &= ~(IDE_DRV_MASK << dshift);
+	etc |= IDE_ETC_NODMA << dshift;
+
+	cs5536_write(pdev, DTC, dtc);
+	cs5536_write(pdev, CAST, cast);
+	cs5536_write(pdev, ETC, etc);
+}
+
+/**
+ *	cs5536_set_dmamode		-	DMA timing setup
+ *	@ap: ATA interface
+ *	@adev: Device being configured
+ *
+ */
+
+static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	static const u8 udma_timings[6] = {
+		0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
+	};
+
+	static const u8 mwdma_timings[3] = {
+		0x67, 0x21, 0x20,
+	};
+
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u32 dtc, etc;
+	int mode = adev->dma_mode;
+	int dshift = ap->port_no ? IDE_D1_SHIFT : IDE_D0_SHIFT;
+
+	if (mode >= XFER_UDMA_0) {
+		cs5536_read(pdev, ETC, &etc);
+
+		etc &= ~(IDE_DRV_MASK << dshift);
+		etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
+
+		cs5536_write(pdev, ETC, etc);
+	} else { /* MWDMA */
+		cs5536_read(pdev, DTC, &dtc);
+
+		dtc &= ~(IDE_DRV_MASK << dshift);
+		dtc |= mwdma_timings[mode] << dshift;
+
+		cs5536_write(pdev, DTC, dtc);
+	}
+}
+
+static struct scsi_host_template cs5536_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
+	.bios_param		= ata_std_bios_param,
+};
+
+static struct ata_port_operations cs5536_port_ops = {
+	.set_piomode		= cs5536_set_piomode,
+	.set_dmamode		= cs5536_set_dmamode,
+	.mode_filter		= ata_pci_default_filter,
+
+	.tf_load		= ata_tf_load,
+	.tf_read		= ata_tf_read,
+	.check_status		= ata_check_status,
+	.exec_command		= ata_exec_command,
+	.dev_select		= ata_std_dev_select,
+
+	.freeze			= ata_bmdma_freeze,
+	.thaw			= ata_bmdma_thaw,
+	.error_handler		= ata_bmdma_error_handler,
+	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= cs5536_cable_detect,
+
+	.bmdma_setup		= ata_bmdma_setup,
+	.bmdma_start		= ata_bmdma_start,
+	.bmdma_stop		= ata_bmdma_stop,
+	.bmdma_status		= ata_bmdma_status,
+
+	.qc_prep		= ata_qc_prep,
+	.qc_issue		= ata_qc_issue_prot,
+
+	.data_xfer		= ata_data_xfer,
+
+	.irq_handler		= ata_interrupt,
+	.irq_clear		= ata_bmdma_irq_clear,
+	.irq_on			= ata_irq_on,
+
+	.port_start		= ata_port_start,
+};
+
+/**
+ *	cs5536_init_one
+ *	@dev: PCI device
+ *	@id: Entry in match table
+ *
+ */
+
+static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	static const struct ata_port_info info = {
+		.sht = &cs5536_sht,
+		.flags = ATA_FLAG_SLAVE_POSS,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.udma_mask = ATA_UDMA5,
+		.port_ops = &cs5536_port_ops,
+	};
+
+	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
+	u32 cfg;
+
+	if (use_msr)
+		printk(KERN_ERR DRV_NAME ": Using MSR regs instead of PCI\n");
+
+	cs5536_read(dev, CFG, &cfg);
+
+	if ((cfg & IDE_CFG_CHANEN) == 0) {
+		printk(KERN_ERR DRV_NAME ": disabled by BIOS\n");
+		return -ENODEV;
+	}
+
+	return ata_pci_init_one(dev, ppi);
+}
+
+static const struct pci_device_id cs5536[] = {
+	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_CS5536_IDE), },
+	{ },
+};
+
+static struct pci_driver cs5536_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= cs5536,
+	.probe		= cs5536_init_one,
+	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ata_pci_device_resume,
+#endif
+};
+
+static int __init cs5536_init(void)
+{
+	return pci_register_driver(&cs5536_pci_driver);
+}
+
+static void __exit cs5536_exit(void)
+{
+	pci_unregister_driver(&cs5536_pci_driver);
+}
+
+MODULE_AUTHOR("Martin K. Petersen");
+MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cs5536);
+MODULE_VERSION(DRV_VERSION);
+module_param_named(msr, use_msr, int, 0644);
+MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
+
+module_init(cs5536_init);
+module_exit(cs5536_exit);