aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata/pata_cypress.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_cypress.c')
-rw-r--r--drivers/ata/pata_cypress.c227
1 files changed, 227 insertions, 0 deletions
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
new file mode 100644
index 00000000000..fd55474e0d1
--- /dev/null
+++ b/drivers/ata/pata_cypress.c
@@ -0,0 +1,227 @@
+/*
+ * pata_cypress.c - Cypress PATA for new ATA layer
+ * (C) 2006 Red Hat Inc
+ * Alan Cox <alan@redhat.com>
+ *
+ * Based heavily on
+ * linux/drivers/ide/pci/cy82c693.c Version 0.40 Sep. 10, 2002
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_cypress"
+#define DRV_VERSION "0.1.2"
+
+/* here are the offset definitions for the registers */
+
+enum {
+ CY82_IDE_CMDREG = 0x04,
+ CY82_IDE_ADDRSETUP = 0x48,
+ CY82_IDE_MASTER_IOR = 0x4C,
+ CY82_IDE_MASTER_IOW = 0x4D,
+ CY82_IDE_SLAVE_IOR = 0x4E,
+ CY82_IDE_SLAVE_IOW = 0x4F,
+ CY82_IDE_MASTER_8BIT = 0x50,
+ CY82_IDE_SLAVE_8BIT = 0x51,
+
+ CY82_INDEX_PORT = 0x22,
+ CY82_DATA_PORT = 0x23,
+
+ CY82_INDEX_CTRLREG1 = 0x01,
+ CY82_INDEX_CHANNEL0 = 0x30,
+ CY82_INDEX_CHANNEL1 = 0x31,
+ CY82_INDEX_TIMEOUT = 0x32
+};
+
+static int cy82c693_pre_reset(struct ata_port *ap)
+{
+ ap->cbl = ATA_CBL_PATA40;
+ return ata_std_prereset(ap);
+}
+
+static void cy82c693_error_handler(struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, cy82c693_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/**
+ * cy82c693_set_piomode - set initial PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Called to do the PIO mode setup.
+ */
+
+static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct ata_timing t;
+ const unsigned long T = 1000000 / 33;
+ short time_16, time_8;
+ u32 addr;
+
+ if (ata_timing_compute(adev, adev->pio_mode, &t, T, 1) < 0) {
+ printk(KERN_ERR DRV_NAME ": mome computation failed.\n");
+ return;
+ }
+
+ time_16 = FIT(t.recover, 0, 15) | (FIT(t.active, 0, 15) << 4);
+ time_8 = FIT(t.act8b, 0, 15) | (FIT(t.rec8b, 0, 15) << 4);
+
+ if (adev->devno == 0) {
+ pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
+
+ addr &= ~0x0F; /* Mask bits */
+ addr |= FIT(t.setup, 0, 15);
+
+ pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
+ pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16);
+ pci_write_config_byte(pdev, CY82_IDE_MASTER_IOW, time_16);
+ pci_write_config_byte(pdev, CY82_IDE_MASTER_8BIT, time_8);
+ } else {
+ pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
+
+ addr &= ~0xF0; /* Mask bits */
+ addr |= (FIT(t.setup, 0, 15) << 4);
+
+ pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
+ pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16);
+ pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOW, time_16);
+ pci_write_config_byte(pdev, CY82_IDE_SLAVE_8BIT, time_8);
+ }
+}
+
+/**
+ * cy82c693_set_dmamode - set initial DMA mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Called to do the DMA mode setup.
+ */
+
+static void cy82c693_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ int reg = CY82_INDEX_CHANNEL0 + ap->port_no;
+
+ /* Be afraid, be very afraid. Magic registers in low I/O space */
+ outb(reg, 0x22);
+ outb(adev->dma_mode - XFER_MW_DMA_0, 0x23);
+
+ /* 0x50 gives the best behaviour on the Alpha's using this chip */
+ outb(CY82_INDEX_TIMEOUT, 0x22);
+ outb(0x50, 0x23);
+}
+
+static struct scsi_host_template cy82c693_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+static struct ata_port_operations cy82c693_port_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = cy82c693_set_piomode,
+ .set_dmamode = cy82c693_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = cy82c693_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ static struct ata_port_info info = {
+ .sht = &cy82c693_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .port_ops = &cy82c693_port_ops
+ };
+ static struct ata_port_info *port_info[1] = { &info };
+
+ /* Devfn 1 is the ATA primary. The secondary is magic and on devfn2. For the
+ moment we don't handle the secondary. FIXME */
+
+ if (PCI_FUNC(pdev->devfn) != 1)
+ return -ENODEV;
+
+ return ata_pci_init_one(pdev, port_info, 1);
+}
+
+static struct pci_device_id cy82c693[] = {
+ { PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { 0, },
+};
+
+static struct pci_driver cy82c693_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = cy82c693,
+ .probe = cy82c693_init_one,
+ .remove = ata_pci_remove_one
+};
+
+static int __init cy82c693_init(void)
+{
+ return pci_register_driver(&cy82c693_pci_driver);
+}
+
+
+static void __exit cy82c693_exit(void)
+{
+ pci_unregister_driver(&cy82c693_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for the CY82C693 PATA controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cy82c693);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(cy82c693_init);
+module_exit(cy82c693_exit);