aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata/pata_it821x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_it821x.c')
-rw-r--r--drivers/ata/pata_it821x.c70
1 files changed, 35 insertions, 35 deletions
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index c8a7798f8ce..af39097d808 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -6,7 +6,7 @@
* based upon
*
* it821x.c
- *
+ *
* linux/drivers/ide/pci/it821x.c Version 0.09 December 2004
*
* Copyright (C) 2004 Red Hat <alan@redhat.com>
@@ -118,7 +118,7 @@ static int it8212_noraid;
*
* Set the cable type
*/
-
+
static int it821x_pre_reset(struct ata_port *ap)
{
ap->cbl = ATA_CBL_PATA80;
@@ -131,7 +131,7 @@ static int it821x_pre_reset(struct ata_port *ap)
*
* Set the cable type and trigger a probe
*/
-
+
static void it821x_error_handler(struct ata_port *ap)
{
return ata_bmdma_drive_eh(ap, it821x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
@@ -286,7 +286,7 @@ static void it821x_passthru_set_piomode(struct ata_port *ap, struct ata_device *
struct it821x_dev *itdev = ap->private_data;
int unit = adev->devno;
int mode_wanted = adev->pio_mode - XFER_PIO_0;
-
+
/* We prefer 66Mhz clock for PIO 0-3, don't care for PIO4 */
itdev->want[unit][1] = pio_want[mode_wanted];
itdev->want[unit][0] = 1; /* PIO is lowest priority */
@@ -301,7 +301,7 @@ static void it821x_passthru_set_piomode(struct ata_port *ap, struct ata_device *
* @adev: ATA device
*
* Set up the DMA modes. The actions taken depend heavily on the mode
- * to use. If UDMA is used as is hopefully the usual case then the
+ * to use. If UDMA is used as is hopefully the usual case then the
* timing register is private and we need only consider the clock. If
* we are using MWDMA then we have to manage the setting ourself as
* we switch devices and mode.
@@ -322,7 +322,7 @@ static void it821x_passthru_set_dmamode(struct ata_port *ap, struct ata_device *
if (adev->dma_mode >= XFER_UDMA_0) {
int mode_wanted = adev->dma_mode - XFER_UDMA_0;
-
+
itdev->want[unit][1] = udma_want[mode_wanted];
itdev->want[unit][0] = 3; /* UDMA is high priority */
itdev->mwdma[unit] = MWDMA_OFF;
@@ -341,7 +341,7 @@ static void it821x_passthru_set_dmamode(struct ata_port *ap, struct ata_device *
it821x_program_udma(ap, adev, itdev->udma[unit]);
} else {
int mode_wanted = adev->dma_mode - XFER_MW_DMA_0;
-
+
itdev->want[unit][1] = mwdma_want[mode_wanted];
itdev->want[unit][0] = 2; /* MWDMA is low priority */
itdev->mwdma[unit] = dma[mode_wanted];
@@ -363,7 +363,7 @@ static void it821x_passthru_set_dmamode(struct ata_port *ap, struct ata_device *
* @qc: Command in progress
*
* Usually drivers set the DMA timing at the point the set_dmamode call
- * is made. IT821x however requires we load new timings on the
+ * is made. IT821x however requires we load new timings on the
* transitions in some cases.
*/
@@ -410,7 +410,7 @@ static void it821x_passthru_bmdma_stop(struct ata_queued_cmd *qc)
*
* Device selection hook. If neccessary perform clock switching
*/
-
+
static void it821x_passthru_dev_select(struct ata_port *ap,
unsigned int device)
{
@@ -431,7 +431,7 @@ static void it821x_passthru_dev_select(struct ata_port *ap,
* perform out own device selection timing loads before the
* usual happenings kick off
*/
-
+
static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc)
{
switch(qc->tf.command)
@@ -466,7 +466,7 @@ static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc)
* perform out own device selection timing loads before the
* usual happenings kick off
*/
-
+
static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc)
{
it821x_passthru_dev_select(qc->ap, qc->dev->devno);
@@ -480,9 +480,9 @@ static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc)
* Use a non standard set_mode function. We don't want to be tuned.
* The BIOS configured everything. Our job is not to fiddle. We
* read the dma enabled bits from the PCI configuration of the device
- * and respect them.
+ * and respect them.
*/
-
+
static void it821x_smart_set_mode(struct ata_port *ap)
{
int dma_enabled = 0;
@@ -492,14 +492,14 @@ static void it821x_smart_set_mode(struct ata_port *ap)
/* It is possible that BMDMA isn't allocated */
if (ap->ioaddr.bmdma_addr)
dma_enabled = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
+
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
if (ata_dev_enabled(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
dev->dma_mode = XFER_MW_DMA_0;
- /* We do need the right mode information for DMA or PIO
+ /* We do need the right mode information for DMA or PIO
and this comes from the current configuration flags */
if (dma_enabled & (1 << (5 + i))) {
dev->xfer_mode = XFER_MW_DMA_0;
@@ -526,7 +526,7 @@ static void it821x_smart_set_mode(struct ata_port *ap)
* FIXME: When FUA appears we need to block FUA too. And SMART and
* basically we need to filter commands for this chip.
*/
-
+
static void it821x_dev_config(struct ata_port *ap, struct ata_device *adev)
{
unsigned char model_num[40];
@@ -535,7 +535,7 @@ static void it821x_dev_config(struct ata_port *ap, struct ata_device *adev)
/* This block ought to be a library routine as it is in several
drivers now */
-
+
ata_id_string(adev->id, model_num, ATA_ID_PROD_OFS,
sizeof(model_num));
s = &model_num[0];
@@ -549,7 +549,7 @@ static void it821x_dev_config(struct ata_port *ap, struct ata_device *adev)
if (adev->max_sectors > 255)
adev->max_sectors = 255;
-
+
if (strstr(model_num, "Integrated Technology Express")) {
/* RAID mode */
printk(KERN_INFO "IT821x %sRAID%d volume",
@@ -569,12 +569,12 @@ static void it821x_dev_config(struct ata_port *ap, struct ata_device *adev)
* Decide if this ATAPI command can be issued by DMA on this
* controller. Return 0 if it can be.
*/
-
+
static int it821x_check_atapi_dma(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct it821x_dev *itdev = ap->private_data;
-
+
/* No ATAPI DMA in smart mode */
if (itdev->smart)
return -EOPNOTSUPP;
@@ -584,7 +584,7 @@ static int it821x_check_atapi_dma(struct ata_queued_cmd *qc)
/* Cool */
return 0;
}
-
+
/**
* it821x_port_start - port setup
@@ -592,10 +592,10 @@ static int it821x_check_atapi_dma(struct ata_queued_cmd *qc)
*
* The it821x needs to maintain private data structures and also to
* use the standard PCI interface which lacks support for this
- * functionality. We instead set up the private data on the port
+ * functionality. We instead set up the private data on the port
* start hook, and tear it down on port stop
*/
-
+
static int it821x_port_start(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -605,13 +605,13 @@ static int it821x_port_start(struct ata_port *ap)
int ret = ata_port_start(ap);
if (ret < 0)
return ret;
-
+
ap->private_data = kmalloc(sizeof(struct it821x_dev), GFP_KERNEL);
if (ap->private_data == NULL) {
ata_port_stop(ap);
return -ENOMEM;
}
-
+
itdev = ap->private_data;
memset(itdev, 0, sizeof(struct it821x_dev));
@@ -650,7 +650,7 @@ static int it821x_port_start(struct ata_port *ap)
*
* Release the private objects we added in it821x_port_start
*/
-
+
static void it821x_port_stop(struct ata_port *ap) {
kfree(ap->private_data);
ap->private_data = NULL; /* We want an OOPS if we reuse this
@@ -684,7 +684,7 @@ static struct ata_port_operations it821x_smart_port_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.mode_filter = ata_pci_default_filter,
-
+
.check_status = ata_check_status,
.check_atapi_dma= it821x_check_atapi_dma,
.exec_command = ata_exec_command,
@@ -712,14 +712,14 @@ static struct ata_port_operations it821x_smart_port_ops = {
.port_start = it821x_port_start,
.port_stop = it821x_port_stop,
.host_stop = ata_host_stop
-};
+};
static struct ata_port_operations it821x_passthru_port_ops = {
.port_disable = ata_port_disable,
.set_piomode = it821x_passthru_set_piomode,
.set_dmamode = it821x_passthru_set_dmamode,
.mode_filter = ata_pci_default_filter,
-
+
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
@@ -748,7 +748,7 @@ static struct ata_port_operations it821x_passthru_port_ops = {
.port_start = it821x_port_start,
.port_stop = it821x_port_stop,
.host_stop = ata_host_stop
-};
+};
static void __devinit it821x_disable_raid(struct pci_dev *pdev)
{
@@ -767,11 +767,11 @@ static void __devinit it821x_disable_raid(struct pci_dev *pdev)
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x20);
}
-
+
static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
u8 conf;
-
+
static struct ata_port_info info_smart = {
.sht = &it821x_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
@@ -788,7 +788,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &it821x_passthru_port_ops
};
static struct ata_port_info *port_info[2];
-
+
static char *mode[2] = { "pass through", "smart" };
/* Force the card into bypass mode if so requested */
@@ -798,13 +798,13 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
}
pci_read_config_byte(pdev, 0x50, &conf);
conf &= 1;
-
+
printk(KERN_INFO DRV_NAME ": controller in %s mode.\n", mode[conf]);
if (conf == 0)
port_info[0] = port_info[1] = &info_passthru;
else
port_info[0] = port_info[1] = &info_smart;
-
+
return ata_pci_init_one(pdev, port_info, 2);
}