diff options
Diffstat (limited to 'drivers/ata/pata_pcmcia.c')
| -rw-r--r-- | drivers/ata/pata_pcmcia.c | 113 |
1 files changed, 94 insertions, 19 deletions
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 5db2013230b..3e7f6a9da28 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -42,7 +42,7 @@ #define DRV_NAME "pata_pcmcia" -#define DRV_VERSION "0.3.2" +#define DRV_VERSION "0.3.3" /* * Private data structure to glue stuff together @@ -74,8 +74,7 @@ static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_d return ata_do_set_mode(link, r_failed_dev); if (memcmp(master->id + ATA_ID_FW_REV, slave->id + ATA_ID_FW_REV, - ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0) - { + ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0) { /* Suspicious match, but could be two cards from the same vendor - check serial */ if (memcmp(master->id + ATA_ID_SERNO, slave->id + ATA_ID_SERNO, @@ -87,6 +86,47 @@ static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_d return ata_do_set_mode(link, r_failed_dev); } +/** + * pcmcia_set_mode_8bit - PCMCIA specific mode setup + * @link: link + * @r_failed_dev: Return pointer for failed device + * + * For the simple emulated 8bit stuff the less we do the better. + */ + +static int pcmcia_set_mode_8bit(struct ata_link *link, + struct ata_device **r_failed_dev) +{ + return 0; +} + +/** + * ata_data_xfer_8bit - Transfer data by 8bit PIO + * @dev: device to target + * @buf: data buffer + * @buflen: buffer length + * @rw: read/write + * + * Transfer data from/to the device data register by 8 bit PIO. + * + * LOCKING: + * Inherited from caller. + */ + +static unsigned int ata_data_xfer_8bit(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) +{ + struct ata_port *ap = dev->link->ap; + + if (rw == READ) + ioread8_rep(ap->ioaddr.data_addr, buf, buflen); + else + iowrite8_rep(ap->ioaddr.data_addr, buf, buflen); + + return buflen; +} + + static struct scsi_host_template pcmcia_sht = { .module = THIS_MODULE, .name = DRV_NAME, @@ -130,6 +170,31 @@ static struct ata_port_operations pcmcia_port_ops = { .port_start = ata_sff_port_start, }; +static struct ata_port_operations pcmcia_8bit_port_ops = { + .set_mode = pcmcia_set_mode_8bit, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .data_xfer = ata_data_xfer_8bit, + + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) @@ -154,9 +219,12 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) cistpl_cftable_entry_t dflt; } *stk = NULL; cistpl_cftable_entry_t *cfg; - int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM; + int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p; unsigned long io_base, ctl_base; void __iomem *io_addr, *ctl_addr; + int n_ports = 1; + + struct ata_port_operations *ops = &pcmcia_port_ops; info = kzalloc(sizeof(*info), GFP_KERNEL); if (info == NULL) @@ -248,7 +316,8 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) goto next_entry; io_base = pdev->io.BasePort1; ctl_base = pdev->io.BasePort1 + 0x0e; - } else goto next_entry; + } else + goto next_entry; /* If we've got this far, we're done */ break; } @@ -282,27 +351,32 @@ next_entry: /* FIXME: Could be more ports at base + 0x10 but we only deal with one right now */ if (pdev->io.NumPorts1 >= 0x20) - printk(KERN_WARNING DRV_NAME ": second channel not yet supported.\n"); + n_ports = 2; + if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620) + ops = &pcmcia_8bit_port_ops; /* - * Having done the PCMCIA plumbing the ATA side is relatively - * sane. + * Having done the PCMCIA plumbing the ATA side is relatively + * sane. */ ret = -ENOMEM; - host = ata_host_alloc(&pdev->dev, 1); + host = ata_host_alloc(&pdev->dev, n_ports); if (!host) goto failed; - ap = host->ports[0]; - ap->ops = &pcmcia_port_ops; - ap->pio_mask = 1; /* ISA so PIO 0 cycles */ - ap->flags |= ATA_FLAG_SLAVE_POSS; - ap->ioaddr.cmd_addr = io_addr; - ap->ioaddr.altstatus_addr = ctl_addr; - ap->ioaddr.ctl_addr = ctl_addr; - ata_std_ports(&ap->ioaddr); + for (p = 0; p < n_ports; p++) { + ap = host->ports[p]; - ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base); + ap->ops = ops; + ap->pio_mask = 1; /* ISA so PIO 0 cycles */ + ap->flags |= ATA_FLAG_SLAVE_POSS; + ap->ioaddr.cmd_addr = io_addr + 0x10 * p; + ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p; + ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p; + ata_std_ports(&ap->ioaddr); + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base); + } /* activate */ ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt, @@ -360,10 +434,11 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904), PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */ + PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */ PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ - PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */ + PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */ PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001), PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */ PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */ |