aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata/pata_qdi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_qdi.c')
-rw-r--r--drivers/ata/pata_qdi.c403
1 files changed, 403 insertions, 0 deletions
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
new file mode 100644
index 00000000000..ededb40e084
--- /dev/null
+++ b/drivers/ata/pata_qdi.c
@@ -0,0 +1,403 @@
+/*
+ * pata_qdi.c - QDI VLB ATA controllers
+ * (C) 2006 Red Hat <alan@redhat.com>
+ *
+ * This driver mostly exists as a proof of concept for non PCI devices under
+ * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly
+ * useful.
+ *
+ * Tuning code written from the documentation at
+ * http://www.ryston.cz/petr/vlb/qd6500.html
+ * http://www.ryston.cz/petr/vlb/qd6580.html
+ *
+ * Probe code based on drivers/ide/legacy/qd65xx.c
+ * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
+ * Samuel Thibault <samuel.thibault@fnac.net>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+
+#define DRV_NAME "pata_qdi"
+#define DRV_VERSION "0.2.4"
+
+#define NR_HOST 4 /* Two 6580s */
+
+struct qdi_data {
+ unsigned long timing;
+ u8 clock[2];
+ u8 last;
+ int fast;
+ struct platform_device *platform_dev;
+
+};
+
+static struct ata_host *qdi_host[NR_HOST];
+static struct qdi_data qdi_data[NR_HOST];
+static int nr_qdi_host;
+
+#ifdef MODULE
+static int probe_qdi = 1;
+#else
+static int probe_qdi;
+#endif
+
+static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ata_timing t;
+ struct qdi_data *qdi = ap->host->private_data;
+ int active, recovery;
+ u8 timing;
+
+ /* Get the timing data in cycles */
+ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+ if (qdi->fast) {
+ active = 8 - FIT(t.active, 1, 8);
+ recovery = 18 - FIT(t.recover, 3, 18);
+ } else {
+ active = 9 - FIT(t.active, 2, 9);
+ recovery = 15 - FIT(t.recover, 0, 15);
+ }
+ timing = (recovery << 4) | active | 0x08;
+
+ qdi->clock[adev->devno] = timing;
+
+ outb(timing, qdi->timing);
+}
+
+static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ata_timing t;
+ struct qdi_data *qdi = ap->host->private_data;
+ int active, recovery;
+ u8 timing;
+
+ /* Get the timing data in cycles */
+ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+ if (qdi->fast) {
+ active = 8 - FIT(t.active, 1, 8);
+ recovery = 18 - FIT(t.recover, 3, 18);
+ } else {
+ active = 9 - FIT(t.active, 2, 9);
+ recovery = 15 - FIT(t.recover, 0, 15);
+ }
+ timing = (recovery << 4) | active | 0x08;
+
+ qdi->clock[adev->devno] = timing;
+
+ outb(timing, qdi->timing);
+
+ /* Clear the FIFO */
+ if (adev->class != ATA_DEV_ATA)
+ outb(0x5F, (qdi->timing & 0xFFF0) + 3);
+}
+
+/**
+ * qdi_qc_issue_prot - command issue
+ * @qc: command pending
+ *
+ * Called when the libata layer is about to issue a command. We wrap
+ * this interface so that we can load the correct ATA timings.
+ */
+
+static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+ struct qdi_data *qdi = ap->host->private_data;
+
+ if (qdi->clock[adev->devno] != qdi->last) {
+ if (adev->pio_mode) {
+ qdi->last = qdi->clock[adev->devno];
+ outb(qdi->clock[adev->devno], qdi->timing);
+ }
+ }
+ return ata_qc_issue_prot(qc);
+}
+
+static void qdi_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data)
+{
+ struct ata_port *ap = adev->ap;
+ int slop = buflen & 3;
+
+ if (ata_id_has_dword_io(adev->id)) {
+ if (write_data)
+ outsl(ap->ioaddr.data_addr, buf, buflen >> 2);
+ else
+ insl(ap->ioaddr.data_addr, buf, buflen >> 2);
+
+ if (unlikely(slop)) {
+ u32 pad;
+ if (write_data) {
+ memcpy(&pad, buf + buflen - slop, slop);
+ outl(le32_to_cpu(pad), ap->ioaddr.data_addr);
+ } else {
+ pad = cpu_to_le16(inl(ap->ioaddr.data_addr));
+ memcpy(buf + buflen - slop, &pad, slop);
+ }
+ }
+ } else
+ ata_pio_data_xfer(adev, buf, buflen, write_data);
+}
+
+static struct scsi_host_template qdi_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+static struct ata_port_operations qdi6500_port_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = qdi6500_set_piomode,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = qdi_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .data_xfer = qdi_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+static struct ata_port_operations qdi6580_port_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = qdi6580_set_piomode,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = qdi_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .data_xfer = qdi_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+/**
+ * qdi_init_one - attach a qdi interface
+ * @type: Type to display
+ * @io: I/O port start
+ * @irq: interrupt line
+ * @fast: True if on a > 33Mhz VLB
+ *
+ * Register an ISA bus IDE interface. Such interfaces are PIO and we
+ * assume do not support IRQ sharing.
+ */
+
+static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast)
+{
+ struct ata_probe_ent ae;
+ struct platform_device *pdev;
+ int ret;
+
+ unsigned long ctrl = io + 0x206;
+
+ /*
+ * Fill in a probe structure first of all
+ */
+
+ pdev = platform_device_register_simple(DRV_NAME, nr_qdi_host, NULL, 0);
+ if (pdev == NULL)
+ return -ENOMEM;
+
+ memset(&ae, 0, sizeof(struct ata_probe_ent));
+ INIT_LIST_HEAD(&ae.node);
+ ae.dev = &pdev->dev;
+
+ if (type == 6580) {
+ ae.port_ops = &qdi6580_port_ops;
+ ae.pio_mask = 0x1F;
+ } else {
+ ae.port_ops = &qdi6500_port_ops;
+ ae.pio_mask = 0x07; /* Actually PIO3 !IORDY is possible */
+ }
+
+ ae.sht = &qdi_sht;
+ ae.n_ports = 1;
+ ae.irq = irq;
+ ae.irq_flags = 0;
+ ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
+ ae.port[0].cmd_addr = io;
+ ae.port[0].altstatus_addr = ctrl;
+ ae.port[0].ctl_addr = ctrl;
+ ata_std_ports(&ae.port[0]);
+
+ /*
+ * Hook in a private data structure per channel
+ */
+ ae.private_data = &qdi_data[nr_qdi_host];
+
+ qdi_data[nr_qdi_host].timing = port;
+ qdi_data[nr_qdi_host].fast = fast;
+ qdi_data[nr_qdi_host].platform_dev = pdev;
+
+ printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io);
+ ret = ata_device_add(&ae);
+ if (ret == 0) {
+ platform_device_unregister(pdev);
+ return -ENODEV;
+ }
+
+ qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev);
+ return 0;
+}
+
+/**
+ * qdi_init - attach qdi interfaces
+ *
+ * Attach qdi IDE interfaces by scanning the ports it may occupy.
+ */
+
+static __init int qdi_init(void)
+{
+ unsigned long flags;
+ static const unsigned long qd_port[2] = { 0x30, 0xB0 };
+ static const unsigned long ide_port[2] = { 0x170, 0x1F0 };
+ static const int ide_irq[2] = { 14, 15 };
+
+ int ct = 0;
+ int i;
+
+ if (probe_qdi == 0)
+ return -ENODEV;
+
+ /*
+ * Check each possible QD65xx base address
+ */
+
+ for (i = 0; i < 2; i++) {
+ unsigned long port = qd_port[i];
+ u8 r, res;
+
+
+ if (request_region(port, 2, "pata_qdi")) {
+ /* Check for a card */
+ local_irq_save(flags);
+ r = inb_p(port);
+ outb_p(0x19, port);
+ res = inb_p(port);
+ outb_p(r, port);
+ local_irq_restore(flags);
+
+ /* Fail */
+ if (res == 0x19)
+ {
+ release_region(port, 2);
+ continue;
+ }
+
+ /* Passes the presence test */
+ r = inb_p(port + 1); /* Check port agrees with port set */
+ if ((r & 2) >> 1 != i) {
+ release_region(port, 2);
+ continue;
+ }
+
+ /* Check card type */
+ if ((r & 0xF0) == 0xC0) {
+ /* QD6500: single channel */
+ if (r & 8) {
+ /* Disabled ? */
+ release_region(port, 2);
+ continue;
+ }
+ ct += qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04);
+ }
+ if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) {
+ /* QD6580: dual channel */
+ if (!request_region(port + 2 , 2, "pata_qdi"))
+ {
+ release_region(port, 2);
+ continue;
+ }
+ res = inb(port + 3);
+ if (res & 1) {
+ /* Single channel mode */
+ ct += qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04);
+ } else {
+ /* Dual channel mode */
+ ct += qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04);
+ ct += qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04);
+ }
+ }
+ }
+ }
+ if (ct != 0)
+ return 0;
+ return -ENODEV;
+}
+
+static __exit void qdi_exit(void)
+{
+ int i;
+
+ for (i = 0; i < nr_qdi_host; i++) {
+ ata_host_remove(qdi_host[i]);
+ /* Free the control resource. The 6580 dual channel has the resources
+ * claimed as a pair of 2 byte resources so we need no special cases...
+ */
+ release_region(qdi_data[i].timing, 2);
+ platform_device_unregister(qdi_data[i].platform_dev);
+ }
+}
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for qdi ATA");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_init(qdi_init);
+module_exit(qdi_exit);
+
+module_param(probe_qdi, int, 0);
+