diff options
Diffstat (limited to 'drivers/ata/pata_scc.c')
-rw-r--r-- | drivers/ata/pata_scc.c | 50 |
1 files changed, 30 insertions, 20 deletions
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index cca3aa225ef..61502bc7bf1 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -43,7 +43,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_scc" -#define DRV_VERSION "0.1" +#define DRV_VERSION "0.2" #define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 @@ -489,23 +489,26 @@ static unsigned int scc_devchk (struct ata_port *ap, * Note: Original code is ata_bus_post_reset(). */ -static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask) +static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask, + unsigned long deadline) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int dev0 = devmask & (1 << 0); unsigned int dev1 = devmask & (1 << 1); - unsigned long timeout; + int rc; /* if device 0 was found in ata_devchk, wait for its * BSY bit to clear */ - if (dev0) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + if (dev0) { + rc = ata_wait_ready(ap, deadline); + if (rc && rc != -ENODEV) + return rc; + } /* if device 1 was found in ata_devchk, wait for * register access, then wait for BSY to clear */ - timeout = jiffies + ATA_TMOUT_BOOT; while (dev1) { u8 nsect, lbal; @@ -514,14 +517,15 @@ static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask) lbal = in_be32(ioaddr->lbal_addr); if ((nsect == 1) && (lbal == 1)) break; - if (time_after(jiffies, timeout)) { - dev1 = 0; - break; - } + if (time_after(jiffies, deadline)) + return -EBUSY; msleep(50); /* give drive a breather */ } - if (dev1) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + if (dev1) { + rc = ata_wait_ready(ap, deadline); + if (rc && rc != -ENODEV) + return rc; + } /* is all this really necessary? */ ap->ops->dev_select(ap, 0); @@ -529,6 +533,8 @@ static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask) ap->ops->dev_select(ap, 1); if (dev0) ap->ops->dev_select(ap, 0); + + return 0; } /** @@ -537,8 +543,8 @@ static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask) * Note: Original code is ata_bus_softreset(). */ -static unsigned int scc_bus_softreset (struct ata_port *ap, - unsigned int devmask) +static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask, + unsigned long deadline) { struct ata_ioports *ioaddr = &ap->ioaddr; @@ -570,7 +576,7 @@ static unsigned int scc_bus_softreset (struct ata_port *ap, if (scc_check_status(ap) == 0xFF) return 0; - scc_bus_post_reset(ap, devmask); + scc_bus_post_reset(ap, devmask, deadline); return 0; } @@ -579,11 +585,13 @@ static unsigned int scc_bus_softreset (struct ata_port *ap, * scc_std_softreset - reset host port via ATA SRST * @ap: port to reset * @classes: resulting classes of attached devices + * @deadline: deadline jiffies for the operation * * Note: Original code is ata_std_softreset(). */ -static int scc_std_softreset (struct ata_port *ap, unsigned int *classes) +static int scc_std_softreset (struct ata_port *ap, unsigned int *classes, + unsigned long deadline) { unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; unsigned int devmask = 0, err_mask; @@ -607,7 +615,7 @@ static int scc_std_softreset (struct ata_port *ap, unsigned int *classes) /* issue bus reset */ DPRINTK("about to softreset, devmask=%x\n", devmask); - err_mask = scc_bus_softreset(ap, devmask); + err_mask = scc_bus_softreset(ap, devmask, deadline); if (err_mask) { ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n", err_mask); @@ -676,10 +684,11 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc) if (reg & INTSTS_BMSINT) { unsigned int classes; + unsigned long deadline = jiffies + ATA_TMOUT_BOOT; printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME); out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT); /* TBD: SW reset */ - scc_std_softreset(ap, &classes); + scc_std_softreset(ap, &classes, deadline); continue; } @@ -862,12 +871,13 @@ static void scc_bmdma_freeze (struct ata_port *ap) /** * scc_pata_prereset - prepare for reset * @ap: ATA port to be reset + * @deadline: deadline jiffies for the operation */ -static int scc_pata_prereset (struct ata_port *ap) +static int scc_pata_prereset(struct ata_port *ap, unsigned long deadline) { ap->cbl = ATA_CBL_PATA80; - return ata_std_prereset(ap); + return ata_std_prereset(ap, deadline); } /** |